summaryrefslogtreecommitdiff
path: root/target/linux/amazon
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/amazon')
-rw-r--r--target/linux/amazon/Makefile25
-rw-r--r--target/linux/amazon/base-files/default/etc/config/network14
-rw-r--r--target/linux/amazon/config/default211
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/Kconfig63
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/Makefile9
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/dma-core.c1455
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/dma-core.h69
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/interrupt.c186
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/pci.c293
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/prom.c77
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/setup.c186
-rw-r--r--target/linux/amazon/files/drivers/atm/amazon_tpe.c3074
-rw-r--r--target/linux/amazon/files/drivers/char/admmod.c1486
-rw-r--r--target/linux/amazon/files/drivers/char/amazon_mei.c7918
-rw-r--r--target/linux/amazon/files/drivers/char/ifx_ssc.c2121
-rw-r--r--target/linux/amazon/files/drivers/char/watchdog/amazon_wdt.c246
-rw-r--r--target/linux/amazon/files/drivers/mtd/maps/amazon.c166
-rw-r--r--target/linux/amazon/files/drivers/net/amazon_sw.c876
-rw-r--r--target/linux/amazon/files/drivers/serial/amazon_asc.c685
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/adm6996.h232
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon.h1440
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h148
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h220
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h54
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h1169
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h757
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h176
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h258
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h23
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h540
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h142
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h96
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h263
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h552
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/irq.h200
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/model.h29
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/port.h72
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/serial.h146
-rw-r--r--target/linux/amazon/files/include/asm-mips/mach-amazon/irq.h7
-rw-r--r--target/linux/amazon/files/include/asm-mips/mach-amazon/mangle-port.h52
-rw-r--r--target/linux/amazon/image/Makefile30
-rw-r--r--target/linux/amazon/patches/017-wdt-driver.patch10
-rw-r--r--target/linux/amazon/patches/100-board.patch63
-rw-r--r--target/linux/amazon/patches/110-char_drivers.patch12
-rw-r--r--target/linux/amazon/patches/130-mtd_drivers.patch9
-rw-r--r--target/linux/amazon/patches/140-net_drivers.patch10
-rw-r--r--target/linux/amazon/patches/150-serial_driver.patch12
-rw-r--r--target/linux/amazon/patches/160-cfi-swap.patch14
48 files changed, 25896 insertions, 0 deletions
diff --git a/target/linux/amazon/Makefile b/target/linux/amazon/Makefile
new file mode 100644
index 0000000..1967d52
--- /dev/null
+++ b/target/linux/amazon/Makefile
@@ -0,0 +1,25 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mips
+BOARD:=amazon
+BOARDNAME:=Infineon Amazon
+FEATURES:=squashfs jffs2 broken
+
+define Target/Description
+ Build firmware images for Infineon Amazon boards
+endef
+
+KERNELNAME:="uImage"
+
+include $(INCLUDE_DIR)/kernel-build.mk
+
+# include the profiles
+-include profiles/*.mk
+
+$(eval $(call BuildKernel))
diff --git a/target/linux/amazon/base-files/default/etc/config/network b/target/linux/amazon/base-files/default/etc/config/network
new file mode 100644
index 0000000..72e39f8
--- /dev/null
+++ b/target/linux/amazon/base-files/default/etc/config/network
@@ -0,0 +1,14 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth1
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
diff --git a/target/linux/amazon/config/default b/target/linux/amazon/config/default
new file mode 100644
index 0000000..2229e63
--- /dev/null
+++ b/target/linux/amazon/config/default
@@ -0,0 +1,211 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_AMAZON=y
+CONFIG_AMAZON_ASC_UART=y
+CONFIG_AMAZON_MTD=y
+CONFIG_AMAZON_NET_SW=y
+CONFIG_AMAZON_PCI=y
+CONFIG_AMAZON_WDT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM43XX is not set
+CONFIG_BITREVERSE=y
+# CONFIG_BT is not set
+CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+# CONFIG_HERMES is not set
+# CONFIG_HOSTAP is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+# CONFIG_I2C is not set
+# CONFIG_IDE is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IRQ_CPU=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_EV64120 is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_MTX1 is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
+# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
+# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
+# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
+# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
+CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
+# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_START=0x0
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NET_PCI is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNPACPI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_RTC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB is not set
diff --git a/target/linux/amazon/files/arch/mips/amazon/Kconfig b/target/linux/amazon/files/arch/mips/amazon/Kconfig
new file mode 100644
index 0000000..179e35e
--- /dev/null
+++ b/target/linux/amazon/files/arch/mips/amazon/Kconfig
@@ -0,0 +1,63 @@
+# copyright 2007 john crispin <blogic@openwrt.org>
+
+menu "Amazon built-in"
+
+config AMAZON_ASC_UART
+ bool "Amazon asc uart"
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ default y
+
+config AMAZON_PCI
+ bool "Amazon PCI support"
+ default y
+ select HW_HAS_PCI
+ select PCI
+
+config AMAZON_NET_SW
+ bool "Amazon network"
+ default y
+
+config AMAZON_WDT
+ bool "Amazon watchdog timer"
+ default y
+
+config AMAZON_MTD
+ bool "Amazon MTD map"
+ default y
+
+choice
+ prompt "Flash Size"
+ depends on AMAZON_MTD
+
+config MTD_AMAZON_FLASH_SIZE_2
+ bool "2MB"
+
+config MTD_AMAZON_FLASH_SIZE_4
+ bool "4MB"
+
+config MTD_AMAZON_FLASH_SIZE_8
+ bool "8MB"
+
+config MTD_AMAZON_FLASH_SIZE_16
+ bool "16MB"
+
+endchoice
+
+choice
+ prompt "Bus Width"
+ depends on AMAZON_MTD
+
+config MTD_AMAZON_BUS_WIDTH_8
+ bool "8-bit"
+
+config MTD_AMAZON_BUS_WIDTH_16
+ bool "16-bit"
+
+config MTD_AMAZON_BUS_WIDTH_32
+ bool "32-bit"
+
+endchoice
+
+
+endmenu
diff --git a/target/linux/amazon/files/arch/mips/amazon/Makefile b/target/linux/amazon/files/arch/mips/amazon/Makefile
new file mode 100644
index 0000000..9cdc100
--- /dev/null
+++ b/target/linux/amazon/files/arch/mips/amazon/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright 2007 openwrt.org
+# John Crispin <blogic@openwrt.org>
+#
+# Makefile for Infineon Amazon
+#
+obj-y := dma-core.o interrupt.o prom.o setup.o
+obj-$(CONFIG_PCI) += pci.o
+
diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.c b/target/linux/amazon/files/arch/mips/amazon/dma-core.c
new file mode 100644
index 0000000..242bc77
--- /dev/null
+++ b/target/linux/amazon/files/arch/mips/amazon/dma-core.c
@@ -0,0 +1,1455 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+//-----------------------------------------------------------------------
+/*
+ * Description:
+ * Driver for Infineon Amazon DMA
+ */
+//-----------------------------------------------------------------------
+/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com]
+ * Created: 7-April-2004
+ */
+//-----------------------------------------------------------------------
+/* History
+ * Last changed on: 4-May-2004
+ * Last changed by: <peng.liu@infineon.com>
+ * Reason: debug
+ */
+//-----------------------------------------------------------------------
+/* Last changed on: 03-Dec-2004
+ * Last changed by: peng.liu@infineon.com
+ * Reason: recover from TPE bug
+ */
+
+//000004:fchang 2005/6/2 Modified by Linpeng as described below
+//-----------------------------------------------------------------------
+/* Last changed on: 28-Jan-2004
+ * Last changed by: peng.liu@infineon.com
+ * Reason:
+ * - handle "out of memory" bug
+ */
+//000003:tc.chen 2005/06/16 fix memory leak when Tx buffer full (heaving traffic).
+//507261:tc.chen 2005/07/26 re-organize code address map to improve performance.
+
+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
+#define MODVERSIONS
+#endif
+
+#if defined(MODVERSIONS) && !defined(__GENKSYMS__)
+#include <linux/modversions.h>
+#endif
+
+#ifndef EXPORT_SYMTAB
+#define EXPORT_SYMTAB /* need this one 'cause we export symbols */
+#endif
+
+#undef DMA_NO_POLLING
+
+/* no TX interrupt handling */
+#define NO_TX_INT
+/* need for DMA workaround */
+#undef AMAZON_DMA_TPE_AAL5_RECOVERY
+
+#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
+#define MAX_SYNC_FAILS 1000000 // 000004:fchang
+unsigned int dma_sync_fails = 0;
+unsigned int total_dma_tpe_reset = 0;
+int (*tpe_reset) (void);
+int (*tpe_start) (void);
+int (*tpe_inject) (void);
+#endif // AMAZON_DMA_TPE_AAL5_RECOVERY
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/selection.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/amazon_dma.h>
+#include "dma-core.h"
+
+#define AMAZON_DMA_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args)
+
+static irqreturn_t dma_interrupt(int irq, void *dev_id);
+extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
+
+/***************************************** global data *******************************************/
+u64 *g_desc_list;
+dev_list *g_current_dev = NULL;
+dev_list *g_head_dev = NULL;
+dev_list *g_tail_dev = NULL;
+channel_info g_log_chan[CHAN_TOTAL_NUM + 1];
+struct proc_dir_entry *g_amazon_dma_dir;
+static u8 rx_chan_list_len = 0;
+static u8 tx_chan_list_len = 0;
+static int rx_chan_list[RX_CHAN_NUM + 1];
+static int tx_chan_list[TX_CHAN_NUM + 1];
+static u32 comb_isr_mask[CHAN_TOTAL_NUM];
+
+static inline int is_rx_chan(int chan_no)
+/*judge if this is an rx channel*/
+{
+ int result = 0;
+ if (chan_no < RX_CHAN_NUM)
+ result = 1;
+ return result;
+}
+
+/* Ugly, Channel ON register is badly mapped to channel no. */
+static u8 ch_on_mapping[CHAN_TOTAL_NUM] =
+ { 0, 1, 2, 3, 6, 7, 10, 4, 5, 8, 9, 11 };
+
+/* Brief: check wether the chan_no is legal
+ * Parameter: chan_no: logical channel number
+ * Return: 0 if is not valid
+ * 1 if is valid
+ */
+static inline int is_valid_dma_ch(int chan_no)
+{
+ return ((chan_no >= 0) && (chan_no < CHAN_TOTAL_NUM));
+}
+
+/* Brief: check whether a channel is open through Channel ON register
+ * Parameter: chan_no: logical channel number
+ * Return: 1 channel is open
+ * 0 not yet
+ * EINVAL: invalid parameter
+ */
+static inline int is_channel_open(int chan_no)
+{
+ return (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &
+ (1 << ch_on_mapping[chan_no]));
+}
+
+/* Brief: add a list entry
+ * Description:
+ * always add to the tail and no redundancy allowed. (i.e. entries are unique)
+ * 0 : entry deleted
+ * <0 : not deleted (due to not unique)
+ */
+static inline int _add_list_entry(int *list, int size_of_list, int entry)
+{
+ int i;
+ for (i = 0; i < size_of_list; i++) {
+ if (list[i] == entry)
+ break;
+ if (list[i] < 0) {
+ list[i] = entry;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+/* Brief: delete a list entry
+ * Description:
+ * find the entry and remove it. shift all entries behind it one step forward if necessary\
+ * Return:
+ * 0 : entry deleted
+ * <0 : not deleted (due to not found?)
+ */
+static inline int _delete_list_entry(int *list, int size_of_list,
+ int entry)
+{
+ int i, j;
+ for (i = 0; i < size_of_list; i++) {
+ if (list[i] == entry) {
+ for (j = i; j < size_of_list; j++) {
+ list[j] = list[j + 1];
+ if (list[j + 1] < 0) {
+ break;
+ }
+ }
+ return 0;
+ }
+ }
+ return -1;
+}
+
+/* Brief: enable a channel through Channel ON register
+ * Parameter: chan_no: logical channel number
+ * Description:
+ * Please don't open a channel without a valid descriptor (hardware pitfall)
+ */
+static inline void open_channel(int chan_no)
+{
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]);
+ if (is_rx_chan(chan_no)) {
+ if (_add_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) {
+ rx_chan_list_len++;
+ } else {
+ AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no);
+ }
+ } else {
+ if (_add_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) {
+ tx_chan_list_len++;
+ } else {
+ AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no);
+ }
+ }
+}
+
+/* Brief: disable a channel through Channel ON register
+ * Parameter: chan_no: logical channel number
+ */
+
+static inline void close_channel(int chan_no)
+{
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]);
+ if (is_rx_chan(chan_no)) {
+ if (_delete_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) {
+ rx_chan_list_len--;
+ } else {
+ AMAZON_DMA_DMSG("cannot remove chan %d from open list \n",
+ chan_no);
+ }
+ } else {
+ if (_delete_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) {
+ tx_chan_list_len--;
+ } else {
+ AMAZON_DMA_DMSG("cannot remove chan %d from open list \n",
+ chan_no);
+ }
+ }
+}
+
+/* Brief: clear RX interrupt
+ */
+inline void rx_chan_clear_isr(int chan_no)
+{
+#ifdef DMA_NO_POLLING
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
+ (AMAZON_DMA_REG32
+ (AMAZON_DMA_CH0_ISR +
+ chan_no *
+ AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | DMA_ISR_CMDCPT
+ | DMA_ISR_DURR));
+#else
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
+ (AMAZON_DMA_REG32
+ (AMAZON_DMA_CH0_ISR +
+ chan_no *
+ AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP |
+ DMA_ISR_CMDCPT));
+#endif
+}
+
+
+/* Brief: hacking function, this will reset all descriptors back to DMA
+ */
+static void dma_reset_all_descriptors(int chan_no)
+{
+ volatile struct rx_desc *rx_desc_p = NULL;
+ int i;
+ rx_desc_p =
+ (struct rx_desc *) g_desc_list +
+ g_log_chan[chan_no].offset_from_base;
+ for (i = 0; i < g_log_chan[chan_no].desc_len; i++) {
+ rx_desc_p->status.word &=
+ (~(DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | DMA_DESC_CPT_SET));
+ rx_desc_p->status.word |=
+ (DMA_DESC_OWN_DMA | g_log_chan[chan_no].packet_size);
+ rx_desc_p++;
+ }
+}
+
+#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
+/* Brief: Reset DMA descriptors
+ */
+static void amazon_dma_reset_tpe_rx(int chan_no)
+{
+ struct tx_desc *tx_desc_p = NULL;
+ int j, i = 0;
+
+ // wait until all TX channels stop transmitting
+ for (j = 9; j <= 10; j++) {
+ tx_desc_p =
+ (struct tx_desc *) g_desc_list +
+ g_log_chan[j].offset_from_base;
+ for (i = 0; i < g_log_chan[j].desc_len; i++) {
+ while ((tx_desc_p->status.field.OWN != CPU_OWN)) {
+ AMAZON_DMA_DMSG("DMA TX in progress\n"); // 000004:fchang
+ udelay(100);
+ }
+ tx_desc_p++;
+ }
+ }
+
+ if (tpe_reset) {
+ total_dma_tpe_reset++;
+ AMAZON_DMA_DMSG
+ ("\n===============resetting TPE========================== \n");
+ if ((*tpe_reset) ()) {
+ panic("cannot reset TPE engien\n"); // 000004:fchang
+ }
+ } else {
+ panic("no tpe_reset function\n"); // 000004:fchang
+ return;
+ }
+ dma_reset_all_descriptors(chan_no);
+ rx_chan_clear_isr(chan_no);
+ mb();
+
+ // send EoP
+ if (tpe_inject) {
+ if ((*tpe_inject) ()) {
+ panic("cannot inject a cell\n"); // 000004:fchang
+ }
+ } else {
+ AMAZON_DMA_EMSG("no tpe_inject function\n");
+ return;
+ }
+ mb();
+ while (1) {
+ if (AMAZON_DMA_REG32
+ (AMAZON_DMA_CH0_ISR +
+ chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT)) {
+ rx_chan_clear_isr(chan_no);
+ mb();
+ dma_reset_all_descriptors(chan_no);
+ if (g_log_chan[chan_no].current_desc ==
+ (g_log_chan[chan_no].desc_len - 1)) {
+ g_log_chan[chan_no].current_desc = 0;
+ } else {
+ g_log_chan[chan_no].current_desc++;
+ }
+ break;
+ }
+ mdelay(1);
+ }
+ mb();
+#if 0
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]);
+ while (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &
+ (1 << ch_on_mapping[chan_no])) {
+ printk("TPE channel still on\n");
+ mdelay(1);
+ }
+
+ // AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = (1<<chan_no);
+ mb();
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + chan_no * AMAZON_DMA_CH_STEP) =
+ 0x32;
+ mb();
+ rx_chan_clear_isr(chan_no);
+ dma_reset_all_descriptors(chan_no);
+ mb();
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]);
+ // g_log_chan[chan_no].current_desc=0;
+ mb();
+ mdelay(1);
+#endif
+ if (tpe_start) {
+ (*tpe_start) ();
+ } else {
+ AMAZON_DMA_EMSG("cannot restart TPE engien\n");
+ }
+}
+#endif // AMAZON_DMA_TPE_AAL5_RECOVERY
+
+
+/* Brief: RX channel interrupt handler
+ * Parameter: RX channel no
+ * Description: the interrupt handler for each RX channel
+ * 1. check descriptor, clear ISR if no incoming packet
+ * 2. inform upper layer to receive packet (and update descriptors)
+ */
+inline void rx_chan_intr_handler(int chan_no)
+{
+ volatile struct rx_desc *rx_desc_p = NULL;
+
+ /* fetch the current descriptor */
+ rx_desc_p =
+ (struct rx_desc *) g_desc_list +
+ g_log_chan[chan_no].offset_from_base +
+ g_log_chan[chan_no].current_desc;
+
+ g_log_chan[chan_no].dma_dev->current_rx_chan =
+ chan_no - g_log_chan[chan_no].dma_dev->logic_rx_chan_base;
+
+ // workaround for DMA pitfall: complete bit set happends before the
+ // other two bits (own,eop) are ready
+ if ((rx_desc_p->status.field.EoP != 1)
+ || (rx_desc_p->status.field.OWN != CPU_OWN)
+ || (rx_desc_p->status.field.data_length ==
+ g_log_chan[chan_no].packet_size)) {
+#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
+ if (chan_no == 4 || chan_no == 5) {
+ dma_sync_fails++;
+ if (dma_sync_fails > MAX_SYNC_FAILS) {
+ // detect bug
+ rx_desc_p0 =
+ (struct rx_desc *) g_desc_list +
+ g_log_chan[chan_no].offset_from_base;
+ rx_desc_p1 =
+ (struct rx_desc *) g_desc_list +
+ g_log_chan[chan_no].offset_from_base + 1;
+ if ((rx_desc_p0->status.field.OWN == CPU_OWN
+ && rx_desc_p0->status.field.EoP != 1)
+ && (rx_desc_p1->status.field.OWN == CPU_OWN
+ && rx_desc_p1->status.field.EoP != 1)) {
+ amazon_dma_reset_tpe_rx(chan_no);
+ dma_sync_fails = 0;
+ return;
+ }
+ dma_sync_fails = 0;
+ AMAZON_DMA_DMSG("too many times ch:%d\n", chan_no); // 000004:fchang
+ return;
+ }
+ udelay(10); // 000004:fchang
+ }
+#endif // //AMAZON_DMA_TPE_AAL5_RECOVERY
+ return;
+ }
+
+ /* inform the upper layer to receive the packet */
+ g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, RCV_INT);
+ /* check the next descriptor, if still contains the incoming packet,
+ then do not clear the interrupt status */
+ rx_desc_p =
+ (struct rx_desc *) g_desc_list +
+ g_log_chan[chan_no].offset_from_base +
+ g_log_chan[chan_no].current_desc;
+ if (!
+ ((rx_desc_p->status.field.OWN == CPU_OWN)
+ && (rx_desc_p->status.field.C == 1))) {
+ rx_chan_clear_isr(chan_no);
+ }
+}
+
+
+/* Brief: TX channel interrupt handler
+ * Parameter: TX channel no
+ * Description: the interrupt handler for each TX channel
+ * 1. check all the descripters,if any of them had transmitted a packet, then free buffer
+ * because we cannot garantee the which one has already transmitted out, we have to go through all the descriptors here
+ * 2. clear the interrupt status bit
+ */
+inline void tx_chan_intr_handler(int chan_no)
+{
+ struct tx_desc *tx_desc_p = NULL;
+ int i = 0;
+
+ tx_desc_p =
+ (struct tx_desc *) g_desc_list +
+ g_log_chan[chan_no].offset_from_base;
+
+ for (i = 0; i < g_log_chan[chan_no].desc_len; i++) {
+ if ((tx_desc_p->status.field.OWN == CPU_OWN)
+ && (tx_desc_p->status.field.C == 1)) {
+ /* if already transmitted, then free the buffer */
+ g_log_chan[chan_no].
+ buffer_free((u8 *) __va(tx_desc_p->Data_Pointer),
+ g_log_chan[chan_no].opt[i]);
+ tx_desc_p->status.field.C = 0;
+ /* inform the upper layer about the completion of the
+ transmitted packet, the upper layer may want to free the
+ packet */
+ g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev,
+ TRANSMIT_CPT_INT);
+ }
+ tx_desc_p++;
+ }
+
+ /* after all these operations, clear the interrupt status bit */
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
+ (AMAZON_DMA_REG32
+ (AMAZON_DMA_CH0_ISR +
+ chan_no *
+ AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP |
+ DMA_ISR_CMDCPT));
+}
+
+/* Brief: DMA interrupt handler
+ */
+static irqreturn_t dma_interrupt(int irq, void *dev_id)
+{
+ int i = 0;
+ int chan_no;
+ u32 isr = 0;
+#ifdef NO_TX_INT // 000004:fchang
+ static int cnt = 0; // 000004:fchang
+#endif // 000004:fchang
+ while ((isr =
+ AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)) & (COMB_ISR_RX_MASK |
+ COMB_ISR_TX_MASK)) {
+ if (isr & COMB_ISR_RX_MASK) {
+ // RX Channels: start WFQ algorithm
+ chan_no = CHAN_TOTAL_NUM;
+ for (i = 0; i < RX_CHAN_NUM; i++) {
+ if ((isr & (comb_isr_mask[i]))
+ && (g_log_chan[i].weight > 0)) {
+ if (g_log_chan[chan_no].weight < g_log_chan[i].weight) {
+ chan_no = i;
+ }
+ }
+ }
+ if (chan_no < CHAN_TOTAL_NUM) {
+ rx_chan_intr_handler(chan_no);
+ } else {
+ for (i = 0; i < RX_CHAN_NUM; i++) {
+ g_log_chan[i].weight = g_log_chan[i].default_weight;
+ }
+ }
+ }
+#ifdef NO_TX_INT
+ cnt++;
+ if (cnt == 10) {
+ cnt = 0;
+ for (i = 0; i < tx_chan_list_len; i++) {
+ if (AMAZON_DMA_REG32
+ (AMAZON_DMA_CH0_ISR +
+ tx_chan_list[i] *
+ AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP)) {
+ tx_chan_intr_handler(tx_chan_list[i]);
+ }
+ }
+ }
+#else
+ if (isr & COMB_ISR_TX_MASK) {
+ // TX channels: RR
+ for (i = 0; i < tx_chan_list_len; i++) {
+ if (isr & (comb_isr_mask[tx_chan_list[i]])) {
+ tx_chan_intr_handler(tx_chan_list[i]);
+ }
+ }
+ }
+#endif
+ } // while
+ return IRQ_HANDLED;
+}
+
+
+/* Brief: read a packet from DMA RX channel
+ * Parameter:
+ * Return: packet length
+ * Description:
+ * This is called back in a context of DMA interrupt
+ * 1. prepare new descriptor
+ * 2. read data
+ * 3. update WFQ weight
+ */
+//507261:tc.chen int dma_device_read(struct dma_device_info* dma_dev, u8** dataptr, void** opt)
+int asmlinkage dma_device_read(struct dma_device_info *dma_dev,
+ u8 ** dataptr, void **opt)
+{
+ u8 *buf;
+ int len;
+ int chan_no = 0;
+ int byte_offset = 0;
+
+ struct rx_desc *rx_desc_p;
+ void *p = NULL;
+ int current_desc;
+
+ chan_no = dma_dev->logic_rx_chan_base + dma_dev->current_rx_chan;
+ current_desc = g_log_chan[chan_no].current_desc;
+ rx_desc_p =
+ (struct rx_desc *) (g_desc_list +
+ g_log_chan[chan_no].offset_from_base +
+ current_desc);
+ buf = (u8 *) __va(rx_desc_p->Data_Pointer); /* extract the virtual
+ address of the data
+ pointer */
+ len = rx_desc_p->status.field.data_length; /* extract the data length */
+#ifndef CONFIG_MIPS_UNCACHED
+ dma_cache_inv((unsigned long) buf, len);
+#endif // CONFIG_MIPS_UNCACHED
+ *(u32 *) dataptr = (u32) buf;
+ if (opt) {
+ *(int *) opt = (int) g_log_chan[chan_no].opt[current_desc]; /* read
+ out
+ the
+ opt
+ information */
+ }
+
+ buf =
+ (u8 *) g_log_chan[chan_no].buffer_alloc(g_log_chan[chan_no].
+ packet_size, &byte_offset,
+ &p);
+ // should check null!!!!
+ if (buf == NULL || p == NULL) {
+ *(u32 *) dataptr = 0;
+ *(int *) opt = 0;
+ len = 0;
+ } else {
+ g_log_chan[chan_no].opt[current_desc] = p;
+ /* reduce the weight for WFQ algorithm */
+ g_log_chan[chan_no].weight -= len;
+ rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buf);
+ }
+ if (current_desc == g_log_chan[chan_no].desc_len - 1) {
+ current_desc = 0;
+ } else {
+ current_desc++;
+ }
+ g_log_chan[chan_no].current_desc = current_desc;
+
+ rx_desc_p->status.word = DMA_DESC_OWN_DMA
+ | (byte_offset << DMA_DESC_BYTEOFF_SHIFT)
+ | g_log_chan[chan_no].packet_size;
+ return len;
+}
+
+/* Brief: write a packet through DMA RX channel to peripheral
+ * Parameter:
+ * Return: packet length
+ * Description:
+ *
+ */
+u64 dma_tx_drop = 0;
+//507261:tc.chen int dma_device_write(struct dma_device_info* dma_dev, u8* dataptr, int len,void* opt)
+int asmlinkage dma_device_write(struct dma_device_info *dma_dev,
+ u8 * dataptr, int len, void *opt)
+{
+ int chan_no = 0;
+ struct tx_desc *tx_desc_p;
+
+ int byte_offset = 0;
+ int current_desc;
+ static int cnt = 0; // 000004:fchang
+
+ unsigned long flag;
+ local_irq_save(flag);
+
+ chan_no = dma_dev->logic_tx_chan_base + dma_dev->current_tx_chan;
+ current_desc = g_log_chan[chan_no].current_desc;
+ tx_desc_p =
+ (struct tx_desc *) (g_desc_list +
+ g_log_chan[chan_no].offset_from_base +
+ current_desc);
+ // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){
+ if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen
+ AMAZON_DMA_DMSG("no TX desc for CPU, drop packet\n");
+ dma_tx_drop++;
+ g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT);
+ local_irq_restore(flag);
+ return 0;
+ }
+ g_log_chan[chan_no].opt[current_desc] = opt;
+
+ /* byte offset----to adjust the starting address of the data buffer,
+ should be multiple of the burst length. */
+ byte_offset =
+ ((u32) CPHYSADDR((u32) dataptr)) % (g_log_chan[chan_no].burst_len *
+ 4);
+#ifndef CONFIG_MIPS_UNCACHED
+ dma_cache_wback((unsigned long) dataptr, len);
+ wmb();
+#endif // CONFIG_MIPS_UNCACHED
+
+ tx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) dataptr) - byte_offset;
+ wmb();
+ tx_desc_p->status.word = DMA_DESC_OWN_DMA
+ | DMA_DESC_SOP_SET
+ | DMA_DESC_EOP_SET | (byte_offset << DMA_DESC_BYTEOFF_SHIFT)
+ | len;
+ wmb();
+ if (is_channel_open(chan_no) == 0) {
+ // turn on if necessary
+ open_channel(chan_no);
+ }
+#ifdef DMA_NO_POLLING
+ if ((AMAZON_DMA_REG32
+ (AMAZON_DMA_CH0_ISR +
+ chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_DURR | DMA_ISR_CPT)) ==
+ (DMA_ISR_DURR)) {
+ // clear DURR if (CPT is AND set and DURR is set)
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR +
+ chan_no * AMAZON_DMA_CH_STEP) = DMA_ISR_DURR;
+ }
+#endif
+
+ if (current_desc == (g_log_chan[chan_no].desc_len - 1)) {
+ current_desc = 0;
+ } else {
+ current_desc++;
+ }
+
+
+ g_log_chan[chan_no].current_desc = current_desc;
+ tx_desc_p =
+ (struct tx_desc *) (g_desc_list +
+ g_log_chan[chan_no].offset_from_base +
+ current_desc);
+ // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){
+ if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen
+ g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT);
+ }
+#ifdef NO_TX_INT
+//000004:fchang Start
+ cnt++;
+ if (cnt == 5) {
+ cnt = 0;
+ tx_chan_intr_handler(chan_no);
+ }
+//000004:fchang End
+#endif
+ local_irq_restore(flag); // 000004:fchang
+ return len;
+}
+
+
+
+int desc_list_proc_read(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int i;
+ u32 *p = (u32 *) g_desc_list;
+ int len = 0;
+ len += sprintf(buf + len, "descriptor list:\n");
+ for (i = 0; i < 120; i++) {
+ len += sprintf(buf + len, "%d\n", i);
+ len += sprintf(buf + len, "%08x\n", *(p + i * 2 + 1));
+ len += sprintf(buf + len, "%08x\n", *(p + i * 2));
+
+ }
+
+ return len;
+
+}
+
+int channel_weight_proc_read(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+
+ // int i=0;
+ int len = 0;
+ len += sprintf(buf + len, "Qos dma channel weight list\n");
+ len +=
+ sprintf(buf + len,
+ "channel_num default_weight current_weight device Tx/Rx\n");
+ len +=
+ sprintf(buf + len,
+ " 0 %08x %08x Switch Rx0\n",
+ g_log_chan[0].default_weight, g_log_chan[0].weight);
+ len +=
+ sprintf(buf + len,
+ " 1 %08x %08x Switch Rx1\n",
+ g_log_chan[1].default_weight, g_log_chan[1].weight);
+ len +=
+ sprintf(buf + len,
+ " 2 %08x %08x Switch Rx2\n",
+ g_log_chan[2].default_weight, g_log_chan[2].weight);
+ len +=
+ sprintf(buf + len,
+ " 3 %08x %08x Switch Rx3\n",
+ g_log_chan[3].default_weight, g_log_chan[3].weight);
+ len +=
+ sprintf(buf + len,
+ " 4 %08x %08x Switch Tx0\n",
+ g_log_chan[4].default_weight, g_log_chan[4].weight);
+ len +=
+ sprintf(buf + len,
+ " 5 %08x %08x Switch Tx1\n",
+ g_log_chan[5].default_weight, g_log_chan[5].weight);
+ /*
+ len+=sprintf(buf+len," 6 %08x %08x TPE
+ Rx0\n",g_log_chan[6].default_weight, g_log_chan[6].weight);
+ len+=sprintf(buf+len," 7 %08x %08x TPE
+ Rx0\n",g_log_chan[7].default_weight, g_log_chan[7].weight);
+ len+=sprintf(buf+len," 8 %08x %08x TPE
+ Tx0\n",g_log_chan[8].default_weight, g_log_chan[8].weight);
+ len+=sprintf(buf+len," 9 %08x %08x TPE
+ Rx0\n",g_log_chan[9].default_weight, g_log_chan[9].weight);
+ len+=sprintf(buf+len," 10 %08x %08x DPLUS
+ Rx0\n",g_log_chan[10].default_weight, g_log_chan[10].weight);
+ len+=sprintf(buf+len," 11 %08x %08x DPLUS
+ Rx0\n",g_log_chan[11].default_weight, g_log_chan[11].weight); */
+ return len;
+}
+
+int dma_register_proc_read(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ dev_list *temp_dev;
+ int len = 0;;
+
+ len += sprintf(buf + len, "amazon dma driver\n");
+ len += sprintf(buf + len, "version 1.0\n");
+ len += sprintf(buf + len, "devices registered:\n");
+ for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
+ len += sprintf(buf + len, "%s ", temp_dev->dev->device_name);
+ }
+ len += sprintf(buf + len, "\n");
+ len += sprintf(buf + len, "CH_ON=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_ON));
+ len += sprintf(buf + len, "CH_RST=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_RST));
+ len += sprintf(buf + len, "CH0_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR));
+ len += sprintf(buf + len, "CH1_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH1_ISR));
+ len += sprintf(buf + len, "CH2_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH2_ISR));
+ len += sprintf(buf + len, "CH3_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH3_ISR));
+ len += sprintf(buf + len, "CH4_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH4_ISR));
+ len += sprintf(buf + len, "CH5_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH5_ISR));
+ len += sprintf(buf + len, "CH6_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH6_ISR));
+ len += sprintf(buf + len, "CH7_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH7_ISR));
+ len += sprintf(buf + len, "CH8_ISR=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH8_ISR));
+ len +=
+ sprintf(buf + len, "CH9_ISR=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH9_ISR));
+ len +=
+ sprintf(buf + len, "CH10_ISR=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH10_ISR));
+ len +=
+ sprintf(buf + len, "CH11_ISR=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH11_ISR));
+ len +=
+ sprintf(buf + len, "LCH0_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK));
+ len +=
+ sprintf(buf + len, "LCH1_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH1_MSK));
+ len +=
+ sprintf(buf + len, "LCH2_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH2_MSK));
+ len +=
+ sprintf(buf + len, "LCH3_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH3_MSK));
+ len +=
+ sprintf(buf + len, "LCH4_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH4_MSK));
+ len +=
+ sprintf(buf + len, "LCH5_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH5_MSK));
+ len +=
+ sprintf(buf + len, "LCH6_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH6_MSK));
+ len +=
+ sprintf(buf + len, "LCH7_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH7_MSK));
+ len +=
+ sprintf(buf + len, "LCH8_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH8_MSK));
+ len +=
+ sprintf(buf + len, "LCH9_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH9_MSK));
+ len +=
+ sprintf(buf + len, "LCH10_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH10_MSK));
+ len +=
+ sprintf(buf + len, "LCH11_MSK=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH11_MSK));
+ len +=
+ sprintf(buf + len, "Desc_BA=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA));
+ len +=
+ sprintf(buf + len, "LCH0_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH1_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH2_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH3_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH4_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH5_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH6_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH7_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH8_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH9_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH10_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH11_DES_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_LEN));
+ len +=
+ sprintf(buf + len, "LCH1_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH2_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH3_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH4_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH5_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH6_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH7_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH8_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH9_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH10_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_OFST));
+ len +=
+ sprintf(buf + len, "LCH11_DES_OFST=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_OFST));
+ len +=
+ sprintf(buf + len, "AMAZON_DMA_SW_BL=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_SW_BL));
+ len +=
+ sprintf(buf + len, "AMAZON_DMA_TPE_BL=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_TPE_BL));
+ len +=
+ sprintf(buf + len, "DPlus2FPI_BL=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_DPlus2FPI_BL));
+ len +=
+ sprintf(buf + len, "GRX_BUF_LEN=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN));
+ len +=
+ sprintf(buf + len, "DMA_ECON_REG=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG));
+ len +=
+ sprintf(buf + len, "POLLING_REG=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG));
+ len +=
+ sprintf(buf + len, "CH_WGT=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_WGT));
+ len +=
+ sprintf(buf + len, "TX_WGT=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_TX_WGT));
+ len +=
+ sprintf(buf + len, "DPlus2FPI_CLASS=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_DPLus2FPI_CLASS));
+ len +=
+ sprintf(buf + len, "COMB_ISR=%08x\n",
+ AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR));
+#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
+ len += sprintf(buf + len, "TPE fails:%u\n", total_dma_tpe_reset); // 000004:fchang
+#endif
+ return len;
+}
+
+/* Brief: initialize DMA registers
+ * Description:
+ */
+static void dma_chip_init(void)
+{
+ int i;
+ for (i = 0; i < CHAN_TOTAL_NUM; i++) {
+ AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST +
+ i * AMAZON_DMA_CH_STEP) = DEFAULT_OFFSET;
+ }
+#ifdef DMA_NO_POLLING
+ AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = 0;
+#else
+ // enable poll mode and set polling counter
+ AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = DMA_POLLING_CNT | DMA_POLLING_ENABLE;
+#endif
+ // to enable DMA drop
+ AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN) = 0x10000;
+}
+
+int insert_dev_list(dev_list * dev)
+{
+ dev_list *temp_dev;
+ if (g_head_dev == NULL) {
+ g_head_dev = dev;
+ g_tail_dev = dev;
+ dev->prev = NULL;
+ dev->next = NULL;
+ } else {
+ for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
+ if (temp_dev->weight < dev->weight) {
+ if (temp_dev->prev)
+ temp_dev->prev->next = dev;
+
+ dev->prev = temp_dev->prev;
+ dev->next = temp_dev;
+ temp_dev->prev = dev;
+ if (temp_dev == g_head_dev)
+ g_head_dev = dev;
+ break;
+ }
+ }
+
+ if (!temp_dev) {
+ g_tail_dev->next = dev;
+ dev->prev = g_tail_dev;
+ dev->next = NULL;
+ g_tail_dev = dev;
+ }
+
+ }
+
+ return 1;
+}
+
+u8 *common_buffer_alloc(int len, int *byte_offset, void **opt)
+{
+ u8 *buffer = (u8 *) kmalloc(len * sizeof(u8), GFP_KERNEL);
+ *byte_offset = 0;
+ return buffer;
+
+}
+
+int common_buffer_free(u8 * dataptr, void *opt)
+{
+ if (dataptr)
+ kfree(dataptr);
+ return 0;
+}
+
+
+int register_dev(struct dma_device_info *dma_dev)
+{
+ int i, j, temp;
+ int burst_reg = 0;
+ u8 *buffer;
+ void *p = NULL;
+ int byte_offset = 0;
+
+ struct rx_desc *rx_desc_p;
+ struct tx_desc *tx_desc_p;
+ if (strcmp(dma_dev->device_name, "switch1") == 0) {
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH1_RST_MASK; // resest
+ // channel
+ // 1st
+ AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian
+ // conversion
+ // for Switch
+ burst_reg = AMAZON_DMA_SW_BL;
+ dma_dev->logic_rx_chan_base = switch_rx_chan_base;
+ dma_dev->logic_tx_chan_base = switch_tx_chan_base;
+ }
+
+ else if (strcmp(dma_dev->device_name, "switch2") == 0) {
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH2_RST_MASK; // resest
+ // channel
+ // 1st
+ AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian
+ // conversion
+ // for Switch
+ burst_reg = AMAZON_DMA_SW_BL;
+ dma_dev->logic_rx_chan_base = switch2_rx_chan_base;
+ dma_dev->logic_tx_chan_base = switch2_tx_chan_base;
+
+ } else if (strcmp(dma_dev->device_name, "TPE") == 0) {
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = TPE_RST_MASK; // resest
+ // channel 1st
+ //
+ burst_reg = AMAZON_DMA_TPE_BL;
+ dma_dev->logic_rx_chan_base = TPE_rx_chan_base;
+ dma_dev->logic_tx_chan_base = TPE_tx_chan_base;
+ }
+
+ else if (strcmp(dma_dev->device_name, "DPlus") == 0) {
+ AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = DPlus2FPI_RST_MASK; // resest
+ // channel
+ // 1st
+ dma_dev->logic_rx_chan_base = DPLus2FPI_rx_chan_base;
+ dma_dev->logic_tx_chan_base = DPLus2FPI_tx_chan_base;
+
+ }
+
+ i = 0;
+ for (temp = dma_dev->tx_burst_len; temp > 2; temp /= 2) {
+ i += 1;
+ }
+
+
+ AMAZON_DMA_REG32(burst_reg) = i << 1;
+ i = 0;
+ for (temp = dma_dev->rx_burst_len; temp > 2; temp /= 2) {
+ i += 1;
+ }
+ AMAZON_DMA_REG32(burst_reg) += i;
+
+ for (i = 0; i < dma_dev->num_rx_chan; i++) {
+
+ temp = dma_dev->logic_rx_chan_base + i;
+ g_log_chan[temp].dma_dev = dma_dev;
+ g_log_chan[temp].weight = dma_dev->rx_chan[i].weight;
+ g_log_chan[temp].default_weight = dma_dev->rx_chan[i].weight;
+ g_log_chan[temp].current_desc = 0;
+ g_log_chan[temp].desc_ofst = DEFAULT_OFFSET;
+ g_log_chan[temp].desc_len = dma_dev->rx_chan[i].desc_num;
+ g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET;
+ g_log_chan[temp].packet_size = dma_dev->rx_chan[i].packet_size;
+
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->rx_chan[i].desc_num;
+ // enable interrupt mask
+ if (temp == 4 || temp == 5) {
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x32;
+ } else {
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36;
+ }
+ strcpy(g_log_chan[temp].device_name, dma_dev->device_name);
+ g_log_chan[temp].burst_len = dma_dev->rx_burst_len;
+ g_log_chan[temp].control = dma_dev->rx_chan[i].control;
+
+
+ /* specify the buffer allocation and free method */
+ if (dma_dev->buffer_alloc)
+ g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc;
+ else
+ g_log_chan[temp].buffer_alloc = common_buffer_alloc;
+
+ if (dma_dev->buffer_free)
+ g_log_chan[temp].buffer_free = dma_dev->buffer_free;
+ else
+ g_log_chan[temp].buffer_free = common_buffer_free;
+
+ if (dma_dev->intr_handler)
+ g_log_chan[temp].intr_handler = dma_dev->intr_handler;
+ else
+ g_log_chan[temp].intr_handler = NULL;
+
+ for (j = 0; j < g_log_chan[temp].desc_len; j++) {
+ rx_desc_p = (struct rx_desc *) (g_desc_list + g_log_chan[temp].offset_from_base + j);
+ rx_desc_p->status.word = 0;
+ rx_desc_p->status.field.data_length = g_log_chan[temp].packet_size;
+ buffer = (u8 *) g_log_chan[temp].buffer_alloc(g_log_chan[temp].packet_size, &byte_offset, &p);
+ rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buffer);
+ rx_desc_p->status.field.byte_offset = byte_offset;
+ /* fix me, should check if the addresss comply with the burst
+ lenght requirment */
+ g_log_chan[temp].opt[j] = p;
+ rx_desc_p->status.field.OWN = DMA_OWN;
+
+ }
+ /* open or close the channel */
+ if (g_log_chan[temp].control)
+ open_channel(temp);
+ else
+ close_channel(temp);
+ }
+
+ for (i = 0; i < dma_dev->num_tx_chan; i++) {
+ temp = dma_dev->logic_tx_chan_base + i;
+ g_log_chan[temp].dma_dev = dma_dev;
+ g_log_chan[temp].weight = dma_dev->tx_chan[i].weight;
+ g_log_chan[temp].default_weight = dma_dev->tx_chan[i].weight;
+ g_log_chan[temp].current_desc = 0;
+ g_log_chan[temp].desc_ofst = DEFAULT_OFFSET;
+ g_log_chan[temp].desc_len = dma_dev->tx_chan[i].desc_num;
+ g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET;
+ g_log_chan[temp].packet_size = dma_dev->tx_chan[i].packet_size;
+
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->tx_chan[i].desc_num;
+ // enable interrupt mask
+#ifdef NO_TX_INT
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x3e;
+#else
+ AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36;
+#endif
+
+ strcpy(g_log_chan[temp].device_name, dma_dev->device_name);
+ g_log_chan[temp].burst_len = dma_dev->tx_burst_len;
+ g_log_chan[temp].control = dma_dev->tx_chan[i].control;
+
+ if (dma_dev->buffer_alloc)
+ g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc;
+ else
+ g_log_chan[temp].buffer_alloc = common_buffer_alloc;
+
+ if (dma_dev->buffer_free)
+ g_log_chan[temp].buffer_free = dma_dev->buffer_free;
+ else
+ g_log_chan[temp].buffer_free = common_buffer_free;
+
+ if (dma_dev->intr_handler)
+ g_log_chan[temp].intr_handler = dma_dev->intr_handler;
+ else
+ g_log_chan[temp].intr_handler = NULL;
+
+ for (j = 0; j < g_log_chan[temp].desc_len; j++) {
+
+ tx_desc_p =
+ (struct tx_desc *) (g_desc_list +
+ g_log_chan[temp].offset_from_base + j);
+ tx_desc_p->status.word = 0;
+ tx_desc_p->status.field.data_length =
+ g_log_chan[temp].packet_size;
+ tx_desc_p->status.field.OWN = CPU_OWN;
+
+ }
+ /* workaround DMA pitfall, we never turn on channel if we don't
+ have proper descriptors */
+ if (!g_log_chan[temp].control) {
+ close_channel(temp);
+ }
+
+ }
+
+ return 0;
+}
+
+int dma_device_register(struct dma_device_info *dma_dev)
+{
+ dev_list *temp_dev;
+ temp_dev = (dev_list *) kmalloc(sizeof(dev_list), GFP_KERNEL);
+ temp_dev->dev = dma_dev;
+ temp_dev->weight = dma_dev->weight;
+ insert_dev_list(temp_dev);
+ /* check whether this is a known device */
+ if ((strcmp(dma_dev->device_name, "switch1") == 0)
+ || (strcmp(dma_dev->device_name, "TPE") == 0)
+ || (strcmp(dma_dev->device_name, "switch2") == 0)
+ || (strcmp(dma_dev->device_name, "DPlus") == 0)) {
+ register_dev(dma_dev);
+ }
+
+ return 0;
+}
+
+
+int unregister_dev(struct dma_device_info *dma_dev)
+{
+ int i, j, temp;
+ u8 *buffer;
+ struct rx_desc *rx_desc_p;
+
+ for (i = 0; i < dma_dev->num_rx_chan; i++) {
+ temp = dma_dev->logic_rx_chan_base + i;
+ close_channel(temp);
+ for (j = 0; j < g_log_chan[temp].desc_len; j++) {
+ rx_desc_p =
+ (struct rx_desc *) (g_desc_list +
+ g_log_chan[temp].offset_from_base + j);
+ buffer = (u8 *) __va(rx_desc_p->Data_Pointer);
+ g_log_chan[temp].buffer_free(buffer, g_log_chan[temp].opt[j]);
+ }
+ }
+ for (i = 0; i < dma_dev->num_tx_chan; i++) {
+ temp = dma_dev->logic_tx_chan_base + i;
+ close_channel(temp);
+ }
+ return 0;
+}
+
+int dma_device_unregister(struct dma_device_info *dev)
+{
+ dev_list *temp_dev;
+ for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
+ if (strcmp(dev->device_name, temp_dev->dev->device_name) == 0) {
+ if ((strcmp(dev->device_name, "switch1") == 0)
+ || (strcmp(dev->device_name, "TPE") == 0)
+ || (strcmp(dev->device_name, "switch2") == 0)
+ || (strcmp(dev->device_name, "DPlus") == 0))
+ unregister_dev(dev);
+ if (temp_dev == g_head_dev) {
+ g_head_dev = temp_dev->next;
+ kfree(temp_dev);
+ } else {
+ if (temp_dev == g_tail_dev)
+ g_tail_dev = temp_dev->prev;
+ if (temp_dev->prev)
+ temp_dev->prev->next = temp_dev->next;
+ if (temp_dev->next)
+ temp_dev->next->prev = temp_dev->prev;
+ kfree(temp_dev);
+ }
+ break;
+ }
+
+ }
+ return 0;
+}
+
+void dma_device_update_rx(struct dma_device_info *dma_dev)
+{
+ int i, temp;
+ for (i = 0; i < dma_dev->num_rx_chan; i++) {
+ temp = dma_dev->logic_rx_chan_base + i;
+ g_log_chan[temp].control = dma_dev->rx_chan[i].control;
+
+ if (g_log_chan[temp].control)
+ open_channel(temp);
+ else
+ close_channel(temp);
+ }
+
+}
+
+void dma_device_update_tx(struct dma_device_info *dma_dev)
+{
+ int i, temp;
+ for (i = 0; i < dma_dev->num_tx_chan; i++) {
+ temp = dma_dev->logic_tx_chan_base + i;
+ g_log_chan[temp].control = dma_dev->tx_chan[i].control;
+ if (g_log_chan[temp].control) {
+ /* we turn on channel when send out the very first packet */
+ // open_channel(temp);
+ } else
+ close_channel(temp);
+ }
+}
+
+int dma_device_update(struct dma_device_info *dma_dev)
+{
+ dma_device_update_rx(dma_dev);
+ dma_device_update_tx(dma_dev);
+ return 0;
+}
+
+static int dma_open(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static int dma_release(struct inode *inode, struct file *file)
+{
+ /* release the resources */
+ return 0;
+}
+
+static int dma_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ int value = 0;
+ int result = 0;
+ int chan_no = 0;
+
+ switch (cmd) {
+ case 0: /* get register value */
+ break;
+ case 1: /* return channel weight */
+ chan_no = *((int *) arg);
+ *((int *) arg + 1) = g_log_chan[chan_no].default_weight;
+ break;
+ case 2: /* set channel weight */
+ chan_no = *((int *) arg);
+ value = *((int *) arg + 1);
+ printk("new weight=%08x\n", value);
+ g_log_chan[chan_no].default_weight = value;
+ break;
+ default:
+ break;
+ }
+ return result;
+}
+
+
+static struct file_operations dma_fops = {
+ owner:THIS_MODULE,
+ open:dma_open,
+ release:dma_release,
+ ioctl:dma_ioctl,
+};
+
+static int dma_init(void)
+{
+ int result = 0;
+ int i;
+ printk("initialising dma core\n");
+ result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops);
+ if (result) {
+ AMAZON_DMA_EMSG("cannot register device dma-core!\n");
+ return result;
+ }
+ result = request_irq(AMAZON_DMA_INT, dma_interrupt, SA_INTERRUPT, "dma-core", (void *) &dma_interrupt);
+ if (result) {
+ AMAZON_DMA_EMSG("error, cannot get dma_irq!\n");
+ free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt);
+ return -EFAULT;
+ }
+
+ g_desc_list = (u64 *) KSEG1ADDR(__get_free_page(GFP_DMA));
+
+ if (g_desc_list == NULL) {
+ AMAZON_DMA_EMSG("no memory for desriptor\n");
+ return -ENOMEM;
+ }
+ memset(g_desc_list, 0, PAGE_SIZE);
+ AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA) = (u32) CPHYSADDR((u32) g_desc_list);
+ g_amazon_dma_dir = proc_mkdir("amazon_dma", NULL);
+ create_proc_read_entry("dma_register", 0, g_amazon_dma_dir, dma_register_proc_read, NULL);
+ create_proc_read_entry("g_desc_list", 0, g_amazon_dma_dir, desc_list_proc_read, NULL);
+ create_proc_read_entry("channel_weight", 0, g_amazon_dma_dir, channel_weight_proc_read, NULL);
+
+ dma_chip_init();
+ for (i = 0; i < (RX_CHAN_NUM + 1); i++) {
+ rx_chan_list[i] = -1;
+ }
+ for (i = 0; i < (TX_CHAN_NUM + 1); i++) {
+ tx_chan_list[i] = -1;
+ }
+
+ for (i = 0; i < CHAN_TOTAL_NUM; i++) {
+ comb_isr_mask[i] = 0x80000000 >> (i);
+ }
+
+ g_log_chan[CHAN_TOTAL_NUM].weight = 0;
+ printk("initialising dma core ... done\n");
+
+ return 0;
+}
+
+arch_initcall(dma_init);
+
+
+void dma_cleanup(void)
+{
+ dev_list *temp_dev;
+
+ unregister_chrdev(DMA_MAJOR, "dma-core");
+ for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
+ kfree(temp_dev);
+ }
+ free_page(KSEG0ADDR((unsigned long) g_desc_list));
+ remove_proc_entry("channel_weight", g_amazon_dma_dir);
+ remove_proc_entry("dma_list", g_amazon_dma_dir);
+ remove_proc_entry("dma_register", g_amazon_dma_dir);
+ remove_proc_entry("amazon_dma", NULL);
+ /* release the resources */
+ free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt);
+}
+
+EXPORT_SYMBOL(dma_device_register);
+EXPORT_SYMBOL(dma_device_unregister);
+EXPORT_SYMBOL(dma_device_read);
+EXPORT_SYMBOL(dma_device_write);
+EXPORT_SYMBOL(dma_device_update);
+EXPORT_SYMBOL(dma_device_update_rx);
+
+MODULE_LICENSE("GPL");
diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.h b/target/linux/amazon/files/arch/mips/amazon/dma-core.h
new file mode 100644
index 0000000..cb3d456
--- /dev/null
+++ b/target/linux/amazon/files/arch/mips/amazon/dma-core.h
@@ -0,0 +1,69 @@
+#ifndef DMA_CORE_H
+#define DMA_CORE_H
+
+#define AMAZON_DMA_REG32(reg_num) *((volatile u32*)(reg_num))
+#define AMAZON_DMA_CH_STEP 4
+
+#define COMB_ISR_RX_MASK 0xfe000000
+#define COMB_ISR_TX_MASK 0x01f00000
+
+
+#define DMA_OWN 1
+#define CPU_OWN 0
+#define DMA_MAJOR 250
+
+//Descriptors
+#define DMA_DESC_OWN_CPU 0x0
+#define DMA_DESC_OWN_DMA 0x80000000
+#define DMA_DESC_CPT_SET 0x40000000
+#define DMA_DESC_SOP_SET 0x20000000
+#define DMA_DESC_EOP_SET 0x10000000
+
+#define switch_rx_chan_base 0
+#define switch_tx_chan_base 7
+#define switch2_rx_chan_base 2
+#define switch2_tx_chan_base 8
+#define TPE_rx_chan_base 4
+#define TPE_tx_chan_base 9
+#define DPLus2FPI_rx_chan_base 6
+#define DPLus2FPI_tx_chan_base 11
+
+#define RX_CHAN_NUM 7
+#define TX_CHAN_NUM 5
+#define CHAN_TOTAL_NUM (RX_CHAN_NUM+TX_CHAN_NUM)
+#define DEFAULT_OFFSET 20
+#define DESCRIPTOR_SIZE 8
+
+typedef struct dev_list{
+ struct dma_device_info* dev;
+ int weight;
+ struct dev_list* prev;
+ struct dev_list* next;
+}dev_list;
+
+typedef struct channel_info{
+ char device_name[16];
+ int occupied;
+ enum attr_t attr;
+ int current_desc;
+ int weight;
+ int default_weight;
+ int desc_num;
+ int burst_len;
+ int desc_len;
+ int desc_ofst;
+ int packet_size;
+ int offset_from_base;
+ int control;
+ void* opt[DEFAULT_OFFSET];
+ u8* (*buffer_alloc)(int len,int* offset, void** opt);
+ int (*buffer_free)(u8* dataptr,void* opt);
+ int (*intr_handler)(struct dma_device_info* info,int status);
+
+ struct dma_device_info* dma_dev;
+}channel_info;
+
+
+
+#endif
+
diff --git a/target/linux/amazon/files/arch/mips/amazon/interrupt.c b/target/linux/amazon/files/arch/mips/amazon/interrupt.c
new file mode 100644
index 0000000..5e34e05
--- /dev/null
+++ b/target/linux/amazon/files/arch/mips/amazon/interrupt.c
@@ -0,0 +1,186 @@
+/*
+ * Gary Jennejohn (C) 2003 <gj@denx.de>
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines for generic manipulation of the interrupts found on the
+ * AMAZON boards.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+#include <asm/bootinfo.h>
+#include <asm/irq_cpu.h>
+#include <asm/irq.h>
+#include <asm/time.h>
+
+static void amazon_disable_irq(unsigned int irq_nr)
+{
+ int i;
+ u32 amazon_ier = AMAZON_ICU_IM0_IER;
+
+ if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0)
+ amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier);
+ else {
+ irq_nr -= INT_NUM_IRQ0;
+ for (i = 0; i <= 4; i++)
+ {
+ if (irq_nr <= 31)
+ amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier);
+ amazon_ier += 0x10;
+ irq_nr -= 32;
+ }
+ }
+}
+
+static void amazon_mask_and_ack_irq(unsigned int irq_nr)
+{
+ int i;
+ u32 amazon_ier = AMAZON_ICU_IM0_IER;
+ u32 amazon_isr = AMAZON_ICU_IM0_ISR;
+
+ if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0){
+ amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier);
+ amazon_writel(AMAZON_DMA_H_MASK, amazon_isr);
+ } else {
+ irq_nr -= INT_NUM_IRQ0;
+ for (i = 0; i <= 4; i++)
+ {
+ if (irq_nr <= 31){
+ amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier);
+ amazon_writel((1 << irq_nr ), amazon_isr);
+ }
+ amazon_ier += 0x10;
+ amazon_isr += 0x10;
+ irq_nr -= 32;
+ }
+ }
+}
+
+static void amazon_enable_irq(unsigned int irq_nr)
+{
+ int i;
+ u32 amazon_ier = AMAZON_ICU_IM0_IER;
+
+ if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0)
+ amazon_writel(amazon_readl(amazon_ier) | AMAZON_DMA_H_MASK, amazon_ier);
+ else {
+ irq_nr -= INT_NUM_IRQ0;
+ for (i = 0; i <= 4; i++)
+ {
+ if (irq_nr <= 31)
+ amazon_writel(amazon_readl(amazon_ier) | (1 << irq_nr ), amazon_ier);
+ amazon_ier += 0x10;
+ irq_nr -= 32;
+ }
+ }
+}
+
+static unsigned int amazon_startup_irq(unsigned int irq)
+{
+ amazon_enable_irq(irq);
+ return 0;
+}
+
+static void amazon_end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+ amazon_enable_irq(irq);
+ }
+}
+
+static struct hw_interrupt_type amazon_irq_type = {
+ "AMAZON",
+ .startup = amazon_startup_irq,
+ .enable = amazon_enable_irq,
+ .disable = amazon_disable_irq,
+ .unmask = amazon_enable_irq,
+ .ack = amazon_mask_and_ack_irq,
+ .mask = amazon_disable_irq,
+ .mask_ack = amazon_mask_and_ack_irq,
+ .end = amazon_end_irq
+};
+
+/* Cascaded interrupts from IM0-4 */
+static inline void amazon_hw_irqdispatch(u8 line)
+{
+ u32 irq;
+
+ irq = (amazon_readl(AMAZON_ICU_IM_VEC) >> (line * 5)) & AMAZON_ICU_IM0_VEC_MASK;
+ if (line == 0 && irq <= 11 && irq >= 0) {
+ //DMA fixed to IM0_IRL0
+ irq = 0;
+ }
+ do_IRQ(irq + INT_NUM_IRQ0 + (line * 32));
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+ if (pending & CAUSEF_IP7){
+ do_IRQ(MIPS_CPU_TIMER_IRQ);
+ goto out;
+ } else {
+ unsigned int i;
+ for (i = 0; i <= 4; i++)
+ {
+ if(pending & (CAUSEF_IP2 << i)){
+ amazon_hw_irqdispatch(i);
+ goto out;
+ }
+ }
+ }
+ printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
+out:
+ return;
+}
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .name = "cascade",
+};
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ /* mask all interrupt sources */
+ for(i = 0; i <= 4; i++){
+ amazon_writel(0, AMAZON_ICU_IM0_IER + (i * 0x10));
+ }
+
+ mips_cpu_irq_init();
+
+ /* set up irq cascade */
+ for (i = 2; i <= 6; i++) {
+ setup_irq(i, &cascade);
+ }
+
+ for (i = INT_NUM_IRQ0; i <= INT_NUM_IM4_IRL31; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ set_irq_chip(i, &amazon_irq_type);
+ }
+}
diff --git a/target/linux/amazon/files/arch/mips/amazon/pci.c b/target/linux/amazon/files/arch/mips/amazon/pci.c
new file mode 100644
index 0000000..ab305a9
--- /dev/null
+++ b/target/linux/amazon/files/arch/mips/amazon/pci.c
@@ -0,0 +1,293 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+/* FIXME: convert nasty volatile register derefs to readl/writel calls */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/paccess.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/amazon.h>
+
+#define AMAZON_PCI_REG32( addr ) (*(volatile u32 *)(addr))
+#ifndef AMAZON_PCI_MEM_BASE
+#define AMAZON_PCI_MEM_BASE 0xb2000000
+#endif
+#define AMAZON_PCI_MEM_SIZE 0x00400000
+#define AMAZON_PCI_IO_BASE 0xb2400000
+#define AMAZON_PCI_IO_SIZE 0x00002000
+
+#define AMAZON_PCI_CFG_BUSNUM_SHF 16
+#define AMAZON_PCI_CFG_DEVNUM_SHF 11
+#define AMAZON_PCI_CFG_FUNNUM_SHF 8
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+static inline u32 amazon_r32(u32 addr)
+{
+ u32 *ptr = (u32 *) addr;
+ return __raw_readl(ptr);
+}
+
+static inline void amazon_w32(u32 addr, u32 val)
+{
+ u32 *ptr = (u32 *) addr;
+ __raw_writel(val, ptr);
+}
+
+
+static struct resource pci_io_resource = {
+ .name = "io pci IO space",
+#if 0
+ .start = AMAZON_PCI_IO_BASE,
+ .end = AMAZON_PCI_IO_BASE + AMAZON_PCI_IO_SIZE - 1,
+#endif
+ .start = 0,
+ .end = AMAZON_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+ .name = "ext pci memory space",
+ .start = AMAZON_PCI_MEM_BASE,
+ .end = AMAZON_PCI_MEM_BASE + AMAZON_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static inline u32 amazon_pci_swap(u32 val)
+{
+#ifdef CONFIG_AMAZON_PCI_HW_SWAP
+ return swab32(val);
+#else
+ return val;
+#endif
+}
+
+static int amazon_pci_config_access(unsigned char access_type,
+ struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
+{
+ unsigned long flags;
+ u32 pci_addr;
+ u32 val;
+ int ret;
+
+ /* Amazon support slot from 0 to 15 */
+ /* devfn 0 & 0x20 is itself */
+ if ((bus != 0) || (devfn == 0) || (devfn == 0x20))
+ return 1;
+
+ pci_addr=AMAZON_PCI_CFG_BASE |
+ bus->number << AMAZON_PCI_CFG_BUSNUM_SHF |
+ devfn << AMAZON_PCI_CFG_FUNNUM_SHF |
+ (where & ~0x3);
+
+ local_irq_save(flags);
+ if (access_type == PCI_ACCESS_WRITE) {
+ val = amazon_pci_swap(*data);
+ ret = put_dbe(val, (u32 *)pci_addr);
+ } else {
+ ret = get_dbe(val, (u32 *)pci_addr);
+ *data = amazon_pci_swap(val);
+ }
+
+ amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)));
+ amazon_w32(STATUS_COMMAND_ADDR, amazon_r32(STATUS_COMMAND_ADDR));
+ amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)));
+ local_irq_restore(flags);
+
+ return ret;
+}
+
+
+static int amazon_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
+{
+ u32 data = 0;
+ int ret = PCIBIOS_SUCCESSFUL;
+
+ if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) {
+ data = ~0;
+ ret = -1;
+ }
+
+ switch (size) {
+ case 1:
+ *((u8 *) val) = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *((u16 *) val) = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ break;
+ default:
+ return -1;
+ }
+
+ return ret;
+}
+
+
+static int amazon_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+ if (size != 4) {
+ u32 data;
+
+ if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return -1;
+
+ if (size == 1)
+ val = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ else if (size == 2)
+ val = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ else
+ return -1;
+ }
+
+ if (amazon_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops amazon_pci_ops = {
+ amazon_pci_read,
+ amazon_pci_write
+};
+
+static struct pci_controller amazon_pci_controller = {
+ .pci_ops = &amazon_pci_ops,
+ .mem_resource = &pci_mem_resource,
+ .io_resource = &pci_io_resource
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ switch (slot) {
+ case 13:
+ /* IDSEL = AD29 --> USB Host Controller */
+ return INT_NUM_IM2_IRL15;
+ case 14:
+ /* IDSEL = AD30 --> mini PCI connector */
+ return INT_NUM_IM2_IRL14;
+ default:
+ printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
+ return 0;
+ }
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ switch(dev->irq) {
+ case INT_NUM_IM2_IRL15:
+ /*
+ * IDSEL = AD29 --> USB Host Controller
+ * PCI_INTA/B/C--GPIO Port0.2--EXIN3
+ * IN/ALT0:1 ALT1:0
+ * PULL UP
+ */
+ (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffb;
+ (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 4;
+ (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffb;
+ (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 4;
+ (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 4;
+ //External Interrupt Node
+ (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x6000; /* Low Level triggered */
+ (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x8;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ break;
+ case INT_NUM_IM2_IRL14:
+ /*
+ * IDSEL = AD30 --> mini PCI connector
+ * PCI_INTA--GPIO Port0.1--EXIN2
+ * IN/ALT0:1 ALT1:0
+ * PULL UP
+ */
+ (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffd;
+ (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 2;
+ (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffd;
+ (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 2;
+ (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 2;
+ //External Interrupt Node
+ (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x600;
+ (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x4;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ break;
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+int amazon_pci_init(void)
+{
+ u32 temp_buffer;
+
+#ifdef CONFIG_AMAZON_PCI_HW_SWAP
+ AMAZON_PCI_REG32(IRM) = AMAZON_PCI_REG32(IRM) | (1<<27) | (1<<28);
+ wmb();
+#endif
+
+ AMAZON_PCI_REG32(CLOCK_CONTROL) = AMAZON_PCI_REG32(CLOCK_CONTROL) | (1<<ARB_CTRL_bit);
+ amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)));
+
+ AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) = AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) | (1<<BUS_MASTER_ENABLE_BIT) |(1<<MEM_SPACE_ENABLE_BIT);
+
+ temp_buffer = AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR);
+ temp_buffer = temp_buffer | (1<< INTERNAL_ARB_ENABLE_BIT);
+ temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_REQ_MASK_2BITS);
+ temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_GNT_MASK_2BITS);
+
+ /* flash */
+ temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_REQ_MASK_2BITS);
+ temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_GNT_MASK_2BITS);
+
+ /* external master */
+ temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_REQ_MASK_2BITS);
+ temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_GNT_MASK_2BITS);
+
+ AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR) = temp_buffer;
+ wmb();
+
+ AMAZON_PCI_REG32(FPI_ADDRESS_MAP_0) = 0xb2000000;
+ AMAZON_PCI_REG32(FPI_ADDRESS_MAP_1) = 0xb2100000;
+ AMAZON_PCI_REG32(FPI_ADDRESS_MAP_2) = 0xb2200000;
+ AMAZON_PCI_REG32(FPI_ADDRESS_MAP_3) = 0xb2300000;
+ AMAZON_PCI_REG32(FPI_ADDRESS_MAP_4) = 0xb2400000;
+ AMAZON_PCI_REG32(FPI_ADDRESS_MAP_5) = 0xb2500000;
+ AMAZON_PCI_REG32(FPI_ADDRESS_MAP_6) = 0xb2600000;
+ AMAZON_PCI_REG32(FPI_ADDRESS_MAP_7) = 0xb2700000;
+
+ AMAZON_PCI_REG32(BAR11_MASK) = 0x0f000008;
+ AMAZON_PCI_REG32(PCI_ADDRESS_MAP_11) = 0x0;
+ AMAZON_PCI_REG32(BAR1_ADDR) = 0x0;
+ amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)));
+ //use 8 dw burse length
+ AMAZON_PCI_REG32(FPI_BURST_LENGTH) = 0x303;
+
+ set_io_port_base(ioremap(AMAZON_PCI_IO_BASE, AMAZON_PCI_IO_SIZE));
+ register_pci_controller(&amazon_pci_controller);
+ return 0;
+}
+arch_initcall(amazon_pci_init);
diff --git a/target/linux/amazon/files/arch/mips/amazon/prom.c b/target/linux/amazon/files/arch/mips/amazon/prom.c
new file mode 100644
index 0000000..2947473
--- /dev/null
+++ b/target/linux/amazon/files/arch/mips/amazon/prom.c
@@ -0,0 +1,77 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright 2007 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <asm/bootinfo.h>
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/model.h>
+#include <asm/cpu.h>
+
+void prom_putchar(char c)
+{
+ /* Wait for FIFO to empty */
+ while ((amazon_readl(AMAZON_ASC_FSTAT) >> 8) != 0x00) ;
+ /* Crude cr/nl handling is better than none */
+ if(c == '\n')
+ amazon_writel('\r', AMAZON_ASC_TBUF);
+ amazon_writel(c, AMAZON_ASC_TBUF);
+}
+
+void prom_printf(const char * fmt, ...)
+{
+ va_list args;
+ int l;
+ char *p, *buf_end;
+ char buf[1024];
+
+ va_start(args, fmt);
+ /* FIXME - hopefully i < sizeof(buf) */
+ l = vsprintf(buf, fmt, args);
+ va_end(args);
+ buf_end = buf + l;
+
+ for (p = buf; p < buf_end; p++)
+ prom_putchar(*p);
+}
+
+
+void __init prom_init(void)
+{
+ mips_machgroup = MACH_GROUP_INFINEON;
+ mips_machtype = MACH_INFINEON_AMAZON;
+
+ strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
+
+ add_memory_region(0x00000000, 0x1000000, BOOT_MEM_RAM);
+}
+
+void prom_free_prom_memory(void)
+{
+}
+
+const char *get_system_type(void)
+{
+ return BOARD_SYSTEM_TYPE;
+}
diff --git a/target/linux/amazon/files/arch/mips/amazon/setup.c b/target/linux/amazon/files/arch/mips/amazon/setup.c
new file mode 100644
index 0000000..a96b565
--- /dev/null
+++ b/target/linux/amazon/files/arch/mips/amazon/setup.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2004 Peng Liu <peng.liu@infineon.com>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/model.h>
+
+extern void prom_printf(const char * fmt, ...);
+static void amazon_reboot_setup(void);
+
+/* the CPU clock rate - lifted from u-boot */
+unsigned int amazon_get_cpu_hz(void)
+{
+ /*-----------------------------------*/
+ /**CGU CPU Clock Reduction Register***/
+ /*-----------------------------------*/
+ switch(amazon_readl(AMAZON_CGU_CPUCRD) & 0x3){
+ case 0:
+ /*divider ration 1/1, 235 MHz clock */
+ return 235000000;
+ case 1:
+ /*divider ration 2/3, 235 MHz clock, clock not accurate, here */
+ return 150000000;
+ case 2:
+ /*divider ration 1/2, 235 MHz clock */
+ return 117500000;
+ default:
+ /*divider ration 1/4, 235 MHz clock */
+ return 58750000;
+ }
+}
+
+/* the FPI clock rate - lifted from u-boot */
+unsigned int amazon_get_fpi_hz(void)
+{
+ unsigned int clkCPU;
+ clkCPU = amazon_get_cpu_hz();
+
+ /*-------------------------------------*/
+ /***CGU Clock Divider Select Register***/
+ /*-------------------------------------*/
+ switch (amazon_readl(AMAZON_CGU_DIV) & 0x3)
+ {
+ case 1:
+ return clkCPU >> 1;
+ case 2:
+ return clkCPU >> 2;
+ default:
+ return clkCPU;
+ /* '11' is reserved */
+ }
+}
+
+/* this doesn't really belong here, but it's a convenient location */
+unsigned int amazon_get_cpu_ver(void)
+{
+ static unsigned int cpu_ver = 0;
+ if (cpu_ver == 0)
+ cpu_ver = amazon_readl(AMAZON_MCD_CHIPID) & 0xFFFFF000;
+ return cpu_ver;
+}
+
+void amazon_time_init(void)
+{
+ mips_hpt_frequency = amazon_get_cpu_hz()/2;
+ printk("mips_hpt_frequency:%d\n", mips_hpt_frequency);
+}
+
+extern int hr_time_resolution;
+
+/* ISR GPTU Timer 6 for high resolution timer */
+static void amazon_timer6_interrupt(int irq, void *dev_id)
+{
+ timer_interrupt(AMAZON_TIMER6_INT, NULL);
+}
+
+static struct irqaction hrt_irqaction = {
+ .handler = amazon_timer6_interrupt,
+ .flags = SA_INTERRUPT,
+ .name = "hrt",
+};
+
+/*
+ * THe CPU counter for System timer, set to HZ
+ * GPTU Timer 6 for high resolution timer, set to hr_time_resolution
+ * Also misuse this routine to print out the CPU type and clock.
+ */
+void __init plat_timer_setup(struct irqaction *irq)
+{
+ /* cpu counter for timer interrupts */
+ setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+
+ /* enable the timer in the PMU */
+ amazon_writel(amazon_readl(AMAZON_PMU_PWDCR)| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI, AMAZON_PMU_PWDCR);
+
+ /* setup the GPTU for timer tick f_fpi == f_gptu*/
+ amazon_writel(0x0100, AMAZON_GPTU_CLC);
+ amazon_writel(0xffff, AMAZON_GPTU_CAPREL);
+ amazon_writel(0x80C0, AMAZON_GPTU_T6CON);
+}
+
+void __init plat_mem_setup(void)
+{
+ u32 chipid = 0;
+ u32 part_no = 0;
+
+ chipid = amazon_readl(AMAZON_MCD_CHIPID);
+ part_no = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid);
+
+ if(part_no == AMAZON_CHIPID_YANGTSE){
+ prom_printf("Yangtse Version\n");
+ } else if (part_no == AMAZON_CHIPID_STANDARD) {
+ prom_printf(SYSTEM_MODEL_NAME "\n");
+ } else {
+ prom_printf("unknown version %8x\n",part_no);
+ }
+
+ amazon_reboot_setup();
+ board_time_init = amazon_time_init;
+
+ //stop reset TPE and DFE
+ amazon_writel(0, AMAZON_RST_REQ);
+ //clock
+ amazon_writel(0x3fff, AMAZON_PMU_PWDCR);
+ //reenable trace capability
+ part_no = readl(AMAZON_BCU_ECON);
+}
+
+static void amazon_machine_restart(char *command)
+{
+ local_irq_disable();
+ amazon_writel(AMAZON_RST_ALL, AMAZON_RST_REQ);
+ for (;;) ;
+}
+
+static void amazon_machine_halt(void)
+{
+ printk(KERN_NOTICE "System halted.\n");
+ local_irq_disable();
+ for (;;) ;
+}
+
+static void amazon_machine_power_off(void)
+{
+ printk(KERN_NOTICE "Please turn off the power now.\n");
+ local_irq_disable();
+ for (;;) ;
+}
+
+static void amazon_reboot_setup(void)
+{
+ _machine_restart = amazon_machine_restart;
+ _machine_halt = amazon_machine_halt;
+ pm_power_off = amazon_machine_power_off;
+}
diff --git a/target/linux/amazon/files/drivers/atm/amazon_tpe.c b/target/linux/amazon/files/drivers/atm/amazon_tpe.c
new file mode 100644
index 0000000..cf3e407
--- /dev/null
+++ b/target/linux/amazon/files/drivers/atm/amazon_tpe.c
@@ -0,0 +1,3074 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+//-----------------------------------------------------------------------
+/*
+ * Description:
+ * Driver for Infineon Amazon TPE
+ */
+//-----------------------------------------------------------------------
+/* Author: peng.liu@infineon.com
+ * Created: 12-April-2004
+ */
+//-----------------------------------------------------------------------
+/* History
+ * Last changed on: 13 Oct. 2004
+ * Last changed by: peng.liu@infineon.com
+ * Last changed on: 28 Jan. 2004
+ * Last changed by: peng.liu@infineon.com
+ * Last changed Reason:
+ * - AAL5R may send more bytes than expected in MFL (so far, confirmed as 64 bytes)
+ */
+// 507261:tc.chen 2005/07/26 re-organize code address map to improve performance.
+// 507281:tc.chen 2005/07/28 fix f4 segment isssue
+/* 511045:linmars 2005/11/04 from Liu.Peng: change NRT_VBR bandwidth calculation based on scr instead of pcr */
+
+#ifndef __KERNEL__
+#define __KERNEL__
+#endif
+#ifndef EXPORT_SYMTAB
+#define EXPORT_SYMTAB
+#endif
+
+/*TPE level loopback, bypass AWARE DFE */
+#undef TPE_LOOPBACK
+
+/* enable debug options */
+#undef AMAZON_ATM_DEBUG
+
+/* enable rx error packet analysis */
+#undef AMAZON_ATM_DEBUG_RX
+
+/* test AAL5 Interrupt */
+#undef AMAZON_TPE_TEST_AAL5_INT
+
+/* dump packet */
+#undef AMAZON_TPE_DUMP
+
+/* read ARC register*/
+/* this register is located in side DFE module*/
+#undef AMAZON_TPE_READ_ARC
+
+/* software controlled reassembly */
+#undef AMAZON_TPE_SCR
+
+/* recovery from AAL5 bug */
+#undef AMAZON_TPE_AAL5_RECOVERY
+
+#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
+#define ALPHAEUS_BASE_ADDR 0x31c00
+#define A_CFG_ADDR (ALPHAEUS_BASE_ADDR+0x04)
+#define AR_CB0_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x2c)
+#define AR_CB1_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x30)
+#define AT_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x90)
+#define AR_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x1a0)
+#define AR_CD_CNT0_ADDR (ALPHAEUS_BASE_ADDR+0x1c8)
+#endif
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/netdevice.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/in6.h>
+#include <linux/delay.h>
+#include <asm/amazon/atm_defines.h>
+#include <asm/amazon/amazon_dma.h>
+#include <asm/amazon/amazon_tpe.h>
+
+#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
+#include <asm/amazon/amazon_mei.h>
+#include <asm/amazon/amazon_mei_app.h>
+#endif
+
+#define AMAZON_TPE_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args)
+
+/***************************************** External Functions *******************************************/
+extern unsigned int amazon_get_fpi_hz(void);
+extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
+extern void amz_push_oam(unsigned char *);
+
+//amazon_mei.c
+#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
+extern MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize);
+extern MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
+#endif
+
+/***************************************** Internal Functions *******************************************/
+int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data);
+/***************************************** Global Data *******************************************/
+amazon_atm_dev_t g_atm_dev; //device data
+static struct tq_struct swex_start_task; //BH task
+static struct tq_struct swex_complete_task; //BH task
+#ifdef AMAZON_TPE_SCR
+static struct tq_struct a5r_task; //BH task
+#endif
+static struct dma_device_info g_dma_dev; //for DMA
+static struct atm_dev * amazon_atm_devs[AMAZON_ATM_PORT_NUM];
+static struct oam_last_activity g_oam_time_stamp[AMAZON_ATM_MAX_VCC_NUM];
+static u8 g_oam_cell[AMAZON_AAL0_SDU+4]; //for OAM cells
+#ifdef AMAZON_CHECK_LINK
+static int adsl_link_status; //ADSL link status, 0:down, 1:up
+#endif //AMAZON_CHECK_LINK
+/***************************************** Module Parameters *************************************/
+// Parameter Definition for module
+static int port_enable0 = 1; // Variable for parameter port_enable0
+static int port_enable1 = 0; // Variable for parameter port_enable1
+static int port_max_conn0 = 15; // Variable for parameter port_max_conn0
+static int port_max_conn1 = 0; // Variable for parameter port_max_conn1
+static int port_cell_rate_up0 = 7500; // Variable for parameter port_cell_rate_up0
+static int port_cell_rate_up1 = 7500; // Variable for parameter port_cell_rate_up1
+
+
+static int qsb_tau = 1; // Variable for parameter qsb_tau
+static int qsb_srvm = 0xf; // Variable for parameter qsb_srvm
+static int qsb_tstep = 4 ; // Variable for parameter qsb_tstep
+
+static int cbm_nrt = 3900; // Variable for parameter cbm_nrt
+static int cbm_clp0 =3500; // Variable for parameter cbm_clp0
+static int cbm_clp1 =3200; // Variable for parameter cbm_clp1
+static int cbm_free_cell_no = AMAZON_ATM_FREE_CELLS; // Variable for parameter cbm_free_cell_no
+
+static int a5_fill_pattern = 0x7e; // Variable for parameter a5_fill_pattern '~'
+static int a5s_mtu = 0x700; // mtu for tx
+static int a5r_mtu = 0x700; // mtu for rx
+
+static int oam_q_threshold = 64; // oam queue threshold, minium value 64
+static int rx_q_threshold = 1000; // rx queue threshold, minium value 64
+static int tx_q_threshold = 800; // tx queue threshold, minium value 64
+
+MODULE_PARM(port_max_conn0, "i");
+MODULE_PARM_DESC(port_max_conn0, "Maximum atm connection for port #0");
+MODULE_PARM(port_max_conn1, "i");
+MODULE_PARM_DESC(port_max_conn1, "Maximum atm connection for port #1");
+MODULE_PARM(port_enable0, "i");
+MODULE_PARM_DESC(port_enable0, "0 -> port disabled, 1->port enabled");
+MODULE_PARM(port_enable1, "i");
+MODULE_PARM_DESC(port_enable1, "0 -> port disabled, 1->port enabled");
+MODULE_PARM(port_cell_rate_up0, "i");
+MODULE_PARM_DESC(port_cell_rate_up0, "ATM port upstream rate in cells/s");
+MODULE_PARM(port_cell_rate_up1, "i");
+MODULE_PARM_DESC(port_cell_rate_up1, "ATM port upstream rate in cells/s");
+
+MODULE_PARM(qsb_tau,"i");
+MODULE_PARM_DESC(qsb_tau, "Cell delay variation. value must be > 0");
+MODULE_PARM(qsb_srvm, "i");
+MODULE_PARM_DESC(qsb_srvm, "Maximum burst size");
+MODULE_PARM(qsb_tstep, "i");
+MODULE_PARM_DESC(qsb_tstep, "n*32 cycles per sbs cycles n=1,2,4");
+
+MODULE_PARM(cbm_nrt, "i");
+MODULE_PARM_DESC(cbm_nrt, "Non real time threshold for cell buffer");
+MODULE_PARM(cbm_clp0, "i");
+MODULE_PARM_DESC(cbm_clp0, "Threshold for cells with cell loss priority 0");
+MODULE_PARM(cbm_clp1, "i");
+MODULE_PARM_DESC(cbm_clp1, "Threshold for cells with cell loss priority 1");
+MODULE_PARM(cbm_free_cell_no, "i");
+MODULE_PARM_DESC(cbm_free_cell_no, "Number of cells in the cell buffer manager");
+
+MODULE_PARM(a5_fill_pattern, "i");
+MODULE_PARM_DESC(a5_fill_pattern, "filling pattern (PAD) for aal5 frames");
+MODULE_PARM(a5s_mtu, "i");
+MODULE_PARM_DESC(a5s_mtu, "max. SDU for upstream");
+MODULE_PARM(a5r_mtu, "i");
+MODULE_PARM_DESC(a5r_mtu, "max. SDU for downstream");
+
+MODULE_PARM(oam_q_threshold, "i");
+MODULE_PARM_DESC(oam_q_threshold, "oam queue threshold");
+
+MODULE_PARM(rx_q_threshold, "i");
+MODULE_PARM_DESC(rx_q_threshold, "downstream/rx queue threshold");
+
+MODULE_PARM(tx_q_threshold, "i");
+MODULE_PARM_DESC(tx_q_threshold, "upstream/tx queue threshold");
+
+/***************************************** local functions *************************************/
+/* Brief: valid QID
+ * Return: 1 if valid
+ * 0 if not
+ */
+static inline int valid_qid(int qid)
+{
+ return ( (qid>0) && (qid<AMAZON_ATM_MAX_QUEUE_NUM));
+}
+
+/*
+ * Brief: align to 16 bytes boundary
+ * Parameter:
+ * skb
+ * Description:
+ * use skb_reserve to adjust the data pointer
+ * don't change head pointer
+ * pls allocate extrac 16 bytes before call this function
+ */
+static void inline alloc_align_16(struct sk_buff * skb)
+{
+ if ( ( ((u32) (skb->data)) & 15) != 0){
+ AMAZON_TPE_DMSG("need to adjust the alignment manually\n");
+ skb_reserve(skb, 16 - (((u32) (skb->data)) & 15) );
+ }
+
+}
+
+/*
+ * Brief: initialize the device according to the module paramters
+ * Return: not NULL - ok
+ * NULL - fails
+ * Description: arrange load parameters and call the hardware initialization routines
+ */
+static void atm_init_parameters(amazon_atm_dev_t *dev)
+{
+ //port setting
+ dev->ports[0].enable = port_enable0;
+ dev->ports[0].max_conn = port_max_conn0;
+ dev->ports[0].tx_max_cr = port_cell_rate_up0;
+ if (port_enable1){
+ dev->ports[1].enable = port_enable1;
+ dev->ports[1].max_conn = port_max_conn1;
+ dev->ports[1].tx_max_cr = port_cell_rate_up1;
+ }
+
+ //aal5
+ dev->aal5.padding_byte = a5_fill_pattern;
+ dev->aal5.tx_max_sdu = a5s_mtu;
+ dev->aal5.rx_max_sdu = a5r_mtu;
+
+ //cbm
+ dev->cbm.nrt_thr = cbm_nrt;
+ dev->cbm.clp0_thr = cbm_clp0;
+ dev->cbm.clp1_thr = cbm_clp1;
+ dev->cbm.free_cell_cnt = cbm_free_cell_no;
+
+ //qsb
+ dev->qsb.tau = qsb_tau;
+ dev->qsb.tstepc =qsb_tstep;
+ dev->qsb.sbl = qsb_srvm;
+
+ //allocate on the fly
+ dev->cbm.mem_addr = NULL;
+ dev->cbm.qd_addr = NULL;
+}
+
+
+/* Brief: Find QID for VCC
+ * Parameters: vcc - VCC data structure
+ * Return Value: -EINVAL - VCC not found
+ * qid - QID for this VCC
+ * Description:
+ * This function returns the QID of a given VCC
+ */
+static int amazon_atm_get_queue(struct atm_vcc* vcc)
+{
+ int i;
+ for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
+ if (g_atm_dev.queues[i].vcc == vcc) return i;
+ }
+ return -EINVAL;
+}
+
+
+/*
+ * Brief: Find QID for VPI/VCI
+ * Parameters: vpi - VPI to found
+ * vci - VCI to found
+ *
+ * Return Value: -EINVAL - VPI/VCI not found
+ * qid - QID for this VPI/VCI
+ *
+ * Description:
+ * This function returns the QID for a given VPI/VCI. itf doesn't matter
+ */
+static int amazon_atm_find_vpivci(u8 vpi, u16 vci)
+{
+ int i;
+ struct atm_vcc * vcc;
+ for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
+ if ( (vcc = g_atm_dev.queues[i].vcc)!= NULL) {
+ if ((vcc->vpi == vpi) && (vcc->vci == vci)) return i;
+ }
+ }
+ return -EINVAL;
+}
+
+/* Brief: Find QID for VPI
+ * Parameters: vpi - VPI to found
+ * Return Value: -EINVAL - VPI not found
+ * qid - QID for this VPI
+ *
+ * Description:
+ * This function returns the QID for a given VPI. itf and VCI don't matter
+ */
+static int amazon_atm_find_vpi(u8 vpi)
+{
+ int i;
+ for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
+ if ( g_atm_dev.queues[i].vcc!= NULL) {
+ if (g_atm_dev.queues[i].vcc->vpi == vpi) return i;
+ }
+ }
+ return -EINVAL;
+}
+
+/*
+ * Brief: Clears QID entries for VCC
+ *
+ * Parameters: vcc - VCC to found
+ *
+ * Description:
+ * This function searches for the given VCC and sets it to NULL if found.
+ */
+static inline void amazon_atm_clear_vcc(int i)
+{
+ g_atm_dev.queues[i].vcc = NULL;
+ g_atm_dev.queues[i].free = 1;
+}
+
+
+/*
+ * Brief: dump skb data
+ */
+static inline void dump_skb(u32 len, char * data)
+{
+#ifdef AMAZON_TPE_DUMP
+ int i;
+ for(i=0;i<len;i++){
+ printk("%2.2x ",(u8)(data[i]));
+ if (i % 16 == 15)
+ printk("\n");
+ }
+ printk("\n");
+#endif
+}
+
+/*
+ * Brief: dump queue descriptor
+ */
+static inline void dump_qd(int qid)
+{
+#ifdef AMAZON_TPE_DUMP
+ u8 * qd_addr;
+ if (valid_qid(qid) != 1) return;
+ qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
+ AMAZON_TPE_EMSG("qid: %u [%8x][%8x][%8x][%8x]\n", qid
+ ,readl(qd_addr+qid*CBM_QD_SIZE+0x0)
+ ,readl(qd_addr+qid*CBM_QD_SIZE+0x4)
+ ,readl(qd_addr+qid*CBM_QD_SIZE+0x8)
+ ,readl(qd_addr+qid*CBM_QD_SIZE+0xc));
+#endif
+}
+
+/*
+ * Brief: release TX skbuff
+ */
+static inline void amazon_atm_free_tx_skb_vcc(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+ if ( vcc->pop != NULL) {
+ vcc->pop(vcc, skb);
+ } else {
+ dev_kfree_skb_any(skb);
+ }
+}
+/*
+ * Brief: release TX skbuff
+ */
+static inline void amazon_atm_free_tx_skb(struct sk_buff *skb)
+{
+ struct atm_vcc* vcc = ATM_SKB(skb)->vcc;
+ if (vcc!=NULL){
+ amazon_atm_free_tx_skb_vcc(vcc,skb);
+ } else {
+ dev_kfree_skb_any(skb);//fchang:Added
+ }
+}
+
+/* Brief: divide by 64 and round up
+ */
+static inline u32 divide_by_64_round_up(int input)
+{
+ u32 tmp1;
+ tmp1 = (u32) input;
+ tmp1 = (tmp1%64)?(tmp1/64 + 1): (tmp1/64);
+ if (tmp1 == 0) tmp1 = 1;
+ return tmp1;
+}
+
+/*
+ * Brief: statistics
+ */
+#ifdef AMAZON_ATM_DEBUG
+static inline void queue_statics(int qid, qs_t idx)
+{
+ if (valid_qid(qid)){
+ g_atm_dev.queues[qid].qs[idx]++;
+ }
+}
+#else //not AMAZON_ATM_DEBUG
+static inline void queue_statics(int qid, qs_t idx){}
+#endif //AMAZON_ATM_DEBUG
+
+
+/* Brief: set dma tx full, i.e. there is no available descriptors
+ */
+static void inline atm_dma_full(void)
+{
+ AMAZON_TPE_DMSG("ch0 is full\n");
+ atomic_set(&g_atm_dev.dma_tx_free_0,0);
+}
+
+/*
+ * Brief set dma tx free (at least one descript is available)
+ */
+inline static void atm_dma_free(void)
+{
+ AMAZON_TPE_DMSG("ch0 is free\n");
+ atomic_set(&g_atm_dev.dma_tx_free_0,1);
+}
+
+
+/* Brief: return the status of DMA TX descriptors
+ * Parameters: TX channel (DMA_TX_CH0, TX_CH1)
+ * Return:
+ * 1: there are availabel TX descriptors
+ * 0: no available
+ * Description:
+ *
+ */
+inline int dma_may_send(int ch)
+{
+ if (atomic_read(&g_atm_dev.dma_tx_free_0)){
+ return 1;
+ }
+ return 0;
+}
+
+/******************************* global functions *********************************/
+/*
+ * Brief: SWIE Cell Extraction Start Routine
+ * and task routine for swex_complete_task
+ * Parameters: irq_stat - interrupt status
+ *
+ * Description:
+ * This is the routine for extracting cell. It will schedule itself if the hardware is busy.
+ * This routine runs in interrupt context
+ */
+void amazon_atm_swex(void * irq_stat)
+{
+ u32 ex_stat=0;
+ u32 addr;
+ // Read extraction status register
+ ex_stat = readl(CBM_HWEXSTAT0_ADDR);
+
+ // Check if extraction/insertion is in progress
+ if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) || (test_and_set_bit(SWIE_LOCK, &(g_atm_dev.swie.lock))!=0)) {
+ AMAZON_TPE_DMSG(" extraction in progress. Will wait\n");
+ swex_start_task.data = irq_stat;
+ queue_task(&swex_start_task, &tq_immediate);
+ mark_bh(IMMEDIATE_BH);
+ }else {
+ // Extract QID
+ g_atm_dev.swie.qid = (((u32)irq_stat) >> 24);
+ AMAZON_TPE_DMSG("extracting from qid=%u\n",g_atm_dev.swie.qid);
+ //read status word
+ addr = KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
+ addr = readl((addr + g_atm_dev.swie.qid * 0x10 + 4) & 0xFFFFFFC0);
+ addr = KSEG1ADDR(addr);
+ g_atm_dev.swie.sw = readl(addr+52)&SWIE_ADDITION_DATA_MASK;
+ AMAZON_TPE_DMSG("cell addition word: %8x \n", g_atm_dev.swie.sw);
+
+ // Start extraction
+ AMAZON_WRITE_REGISTER_L(g_atm_dev.swie.qid | SWIE_CBM_PID_SUBADDR, CBM_HWEXPAR0_ADDR);
+ AMAZON_WRITE_REGISTER_L(SWIE_CBM_SCE0, CBM_HWEXCMD_ADDR);
+ }
+}
+#ifdef AMAZON_TPE_SCR
+u32 g_a5r_wait=0;
+/*
+ * Brief: AAL5 Packet Extraction Routine and task routine for a5r_task
+ * Parameters: irq_stat - interrupt status
+ *
+ * Description:
+ * This is the routine for extracting frame. It will schedule itself if the hardware is busy.
+ * This routine runs in interrupt context
+ */
+void amazon_atm_a5r(void* qid)
+{
+ volatile u32 ex_stat=0;
+ u32 addr;
+ u32 a5r_wait=0;
+
+ ex_stat = readl(CBM_HWEXSTAT0_ADDR);
+#if 0
+ // Check if extraction/insertion is in progress
+ if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) {
+ AMAZON_TPE_DMSG(" extraction in progress. Will wait\n");
+ a5r_task.data = qid;
+ queue_task(&a5r_task, &tq_immediate);
+ mark_bh(IMMEDIATE_BH);
+ }else {
+ AMAZON_TPE_DMSG("extracting from qid=%u\n",(u8)qid);
+ // Start extraction
+ AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
+ AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
+ }
+#else
+ //while ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) {
+ while ( ex_stat != 0x80){
+ a5r_wait++;
+ ex_stat = readl(CBM_HWEXSTAT0_ADDR);
+#if 0
+ if (a5r_wait >= 0xffffff){
+ a5r_wait=0;
+ printk(".");
+ }
+#endif
+ }
+ if (a5r_wait > g_a5r_wait){
+ g_a5r_wait = a5r_wait;
+ }
+ AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
+ AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
+#endif
+}
+
+#endif //AMAZON_TPE_SCR
+
+/* Brief: Handle F4/F5 OAM cell
+ * Return:
+ * 0 ok
+ * <0 fails
+ */
+static int inline amazon_handle_oam_cell(void *data, u8 vpi, u16 vci,u32 status)
+{
+ struct atm_vcc* vcc=NULL;
+ int qid;
+ if (!status&SWIE_EOAM_MASK){
+ AMAZON_TPE_EMSG("unknown cell received, discarded\n");
+ goto amazon_handle_oam_cell_err_exit;
+ }else if (status&SWIE_ECRC10ERROR_MASK){
+ AMAZON_TPE_EMSG("CRC-10 Error Status:%8x, discarded\n", status);
+ goto amazon_handle_oam_cell_err_exit;
+ }else{
+ if(status & (SWIE_EVCI3_MASK |SWIE_EVCI4_MASK)){
+ //F4 level (VPI) OAM, Assume duplex
+ qid = amazon_atm_find_vpi(vpi)+CBM_RX_OFFSET;
+ }else if (status & (SWIE_EPTI4_MASK|SWIE_EPTI5_MASK)){
+ //F5 level (VCI) OAM, Assume duplex
+ qid = amazon_atm_find_vpivci(vpi,vci)+CBM_RX_OFFSET;
+ }else{
+ qid = -1;
+ AMAZON_TPE_EMSG("non-F4/F5 OAM cells?, discarded\n");
+ goto amazon_handle_oam_cell_err_exit;
+ }
+ }
+ if (valid_qid(qid) && ((vcc = g_atm_dev.queues[qid].vcc)!=NULL)){
+ //TODO, should we do this for ALL OAM types? (Actually only User and CC)
+ g_atm_dev.queues[qid].access_time=xtime;
+ if (vcc->push_oam){
+ (*vcc->push_oam)(vcc,data);
+ }else{
+ amz_push_oam(data);
+ }
+ }else{
+ AMAZON_TPE_EMSG("no VCC yet\n");
+ goto amazon_handle_oam_cell_err_exit;
+ }
+ return 0;
+amazon_handle_oam_cell_err_exit:
+ dump_skb(AMAZON_AAL0_SDU,(char *)data);
+ return -1;
+}
+
+/* Brief: SWIE Cell Extraction Finish Routine
+ * and task routine for swex_complete_task
+ * Description:
+ * 1.Allocate a buffer of type struct sk_buff
+ * 2.Copy the data from the temporary memory to this buffer
+ * 3.Push the data to upper layer
+ * 4.Update the statistical data if necessary
+ * 5.Release the temporary data
+
+ */
+void amazon_atm_swex_push(void * data)
+{
+ struct atm_vcc* vcc=NULL;
+ struct sk_buff* skb=NULL;
+ struct amazon_atm_cell_header * cell_header;
+ u32 status;
+ int qid;
+ if (!data){
+ AMAZON_TPE_EMSG("data is NULL\n");
+ return;
+ }
+ qid = ((u8*)data)[AMAZON_AAL0_SDU];
+ status = ((u32*)data)[ATM_AAL0_SDU/4];
+ cell_header = (struct amazon_atm_cell_header *) data;
+ if (valid_qid(qid) != 1){
+ AMAZON_TPE_EMSG("error qid: %u\n",qid);
+ AMAZON_TPE_EMSG("unknown cells recieved\n");
+ }else if (qid == AMAZON_ATM_OAM_Q_ID){
+ //OAM or RM or OTHER cell
+ //Find real connection
+
+#ifdef IKOS_MINI_BOOT
+ //for OAM loop back test
+ dump_skb(56,(char *)data);
+ //kfree(data); using g_oam_cell
+ return;
+#endif //IKOS_MINI_BOOT
+#ifdef TPE_LOOPBACK
+ amz_push_oam(data);
+ return;
+#endif//TPE_LOOPBACK
+ int ret = 0;
+ ret = amazon_handle_oam_cell(data,cell_header->bit.vpi,cell_header->bit.vci,status);
+ if (ret == 0)
+ return;
+ }else{
+ //should be normal AAL0 cells
+ // Get VCC
+ vcc = g_atm_dev.queues[qid].vcc;
+ if (vcc != NULL) {
+ AMAZON_TPE_DMSG("push to upper layer\n");
+ skb = dev_alloc_skb(AMAZON_AAL0_SDU);
+ if (skb != NULL) {
+ //skb->dev=vcc->dev;
+ memcpy(skb_put(skb, AMAZON_AAL0_SDU), data, AMAZON_AAL0_SDU);
+ skb->stamp = xtime;
+ ATM_SKB(skb)->vcc = vcc;
+ (*g_atm_dev.queues[qid].push)(vcc,skb,0);
+ }else{
+ AMAZON_TPE_EMSG(" No memory left for incoming AAL0 cell! Cell discarded!\n");
+ //inform the upper layer
+ (*g_atm_dev.queues[qid].push)(vcc,skb,-ENOMEM);
+ atomic_inc(&vcc->stats->rx_drop);
+ }
+ }else{
+ AMAZON_TPE_EMSG("invalid qid %u\n",qid);
+ }
+ }
+ //kfree(data); using g_oam_cell
+}
+
+/*
+ * Brief: Interrupt handler for software cell extraction (done)
+ * Parameters: irq - CPPN for this interrupt
+ * data - Device ID for this interrupt
+ * regs - Register file
+ *
+ * Description:
+ * When a software extraction is finished this interrupt is issued.
+ * It reads the cell data and sends it to the ATM stack.
+ */
+void amazon_atm_swex_isr(int irq, void *data, struct pt_regs *regs)
+{
+ u32 * cell = NULL;
+ int i;
+ //ATM_AAL0 SDU + QID
+ AMAZON_TPE_DMSG("SWIE extraction done\n");
+ cell = (u32 *) g_oam_cell;
+ if (cell != NULL){
+ //convert to host byte order from big endian
+ for(i=0;i<ATM_AAL0_SDU;i+=4){
+ cell[i/4]=readl(SWIE_ECELL_ADDR+i);
+ }
+ cell[ATM_AAL0_SDU/4]= g_atm_dev.swie.sw;
+ ((u8*)cell)[AMAZON_AAL0_SDU] = g_atm_dev.swie.qid;
+#ifdef IKOS_MINI_BOOT
+ for(i=0;i<ATM_AAL0_SDU;i+=4){
+ AMAZON_TPE_DMSG("[%2x][%2x][%2x][%2x]\n",
+ ((char*)cell)[i],
+ ((char*)cell)[i+1],
+ ((char*)cell)[i+2],
+ ((char*)cell)[i+3]
+ );
+ }
+ AMAZON_TPE_DMSG("qid: %u\n", ((u8*)cell)[AMAZON_AAL0_SDU]);
+ amazon_atm_swex_push((void *) cell);
+#else //not IKOS_MINI_BOOT
+ swex_complete_task.data = cell;
+ queue_task(&swex_complete_task,&tq_immediate);
+ mark_bh(IMMEDIATE_BH);
+#endif //not IKOS_MINI_BOOT
+ }else{
+ AMAZON_TPE_EMSG("no memory for receiving AAL0 cell\n");
+ }
+
+ /* release the lock and check */
+ if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){
+ AMAZON_TPE_EMSG("swie lock is already released\n");
+ }
+ wake_up(&g_atm_dev.swie.sleep);
+}
+/* Brief: Interrupt handler for software cell insertion
+ *
+ * Parameters: irq - CPPN for this interrupt
+ * data - Device ID for this interrupt
+ * regs - Register file
+ *
+ * Description:
+ * When a software insertion is finished this interrupt is issued.
+ * The only purpose is to release the semaphore and read the status register.
+ */
+void amazon_atm_swin_isr(int irq, void *data, struct pt_regs *regs)
+{
+ AMAZON_TPE_DMSG("SWIE insertion done\n");
+ /* release the lock and check */
+ if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){
+ AMAZON_TPE_EMSG("swie lock is already released");
+ }
+ // Release semaphore
+ up(&g_atm_dev.swie.in_sem);
+
+}
+/* Brief: Interrupt handler for software cell insertion & extraction
+ * Parameters: irq - CPPN for this interrupt
+ * data - Device ID for this interrupt
+ * regs - Register file
+ * Description:
+ * When a software insertion or extractionis finished this interrupt is issued.
+ */
+void amazon_atm_swie_isr(int irq, void *data, struct pt_regs *regs)
+{
+ u32 status=0;
+ // Read status register
+ status = readl(SWIE_ISTAT_ADDR);
+ AMAZON_TPE_DMSG("insertion status: %8x\n", status);
+ if (status & SWIE_ISTAT_DONE){
+ //clear interrupt in peripheral and ICU
+ AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR);
+ mask_and_ack_amazon_irq(AMAZON_SWIE_INT);
+
+ amazon_atm_swin_isr(irq,data,regs);
+ }
+ status = readl(SWIE_ESTAT_ADDR);
+ AMAZON_TPE_DMSG("extraction status: %8x\n", status);
+ if (status & SWIE_ESTAT_DONE){
+ //clear interrupt
+ AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR);
+ mask_and_ack_amazon_irq(AMAZON_SWIE_INT);
+
+ amazon_atm_swex_isr(irq,data,regs);
+ }
+ //clear interrupt in ICU
+}
+
+/*
+ * Brief: Insert ATM cell into CBM
+ * Parameters: queue - Target queue
+ * cell - Pointer to cell data
+ * Return Value: EBUSY - CBM is busy
+ * 0 - OK, cell inserted
+ * Description:
+ * This function inserts a cell into the CBM using the software insertion
+ * method. The format of the cell should be
+ * Little Endian (address starting from 0)
+ * H3, H2, H1, H0, P3, P2, P1, P0, P7, P6, P5, P4, ..., P47, P46, P45, P44
+ * Big Endian (address starting from 0)
+ * H0, H1, H2, H3, P0, P1, P2, P3, P4, P5, P6, P7, ..., P44, P45, P46, P47
+ * This function does not free memory!!!
+ */
+int amazon_atm_swin(u8 queue, void* cell)
+{
+ u32 status=0;
+ int i;
+ // Read status register
+ status = readl(SWIE_ISTAT_ADDR);
+ AMAZON_TPE_DMSG(" SWIE status=0x%08x\n",status);
+
+ AMAZON_TPE_DMSG(" Inserting cell qid=%u\n",queue);
+
+#ifdef AMAZON_CHECK_LINK
+ if (adsl_link_status == 0){
+ return -EFAULT;
+ }
+#endif //AMAZON_CHECK_LINK
+
+ // Get semaphore (if possible)
+ if (down_interruptible(&g_atm_dev.swie.in_sem)) {
+ return -ERESTARTSYS;
+ }
+ /* try to set lock */
+ wait_event_interruptible(g_atm_dev.swie.sleep,(test_and_set_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0));
+ if (signal_pending(current)){
+ return -ERESTARTSYS;
+ }
+
+ // Store cell in CBM memory
+ for(i=0;i<ATM_AAL0_SDU;i+=4){
+ AMAZON_WRITE_REGISTER_L(((u32*)cell)[i/4],SWIE_ICELL_ADDR+i);
+ }
+ //Store queue id
+ AMAZON_WRITE_REGISTER_L((u32) queue,SWIE_IQID_ADDR);
+
+ //Start SWIE
+ AMAZON_WRITE_REGISTER_L(SWIE_ICMD_START,SWIE_ICMD_ADDR);
+
+ return 0;
+}
+
+#ifdef AMAZON_ATM_DEBUG
+/*
+ * Brief: Interrupt handler for HTU
+ *
+ * Parameters: irq - CPPN for this interrupt
+ * data - Device ID for this interrupt
+ * regs - Register file
+ *
+ */
+void amazon_atm_htu_isr(int irq, void *data, struct pt_regs *regs)
+{
+ u32 irq_stat=0;
+
+ // Read interrupt status register
+ irq_stat = readl(HTU_ISR0_ADDR);
+ AMAZON_TPE_DMSG("HTU status: %8x\n",irq_stat);
+ //Clear interrupt in CBM and ICU
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_HTU_INT, HTU_SRC0_ADDR);
+ mask_and_ack_amazon_irq(AMAZON_HTU_INT);
+ // Check if Any Cell Arrived
+ if (irq_stat & (HTU_ISR_NE | HTU_ISR_PNE) ) {
+ AMAZON_TPE_EMSG("INFNOENTRY %8x\n", readl(HTU_INFNOENTRY_ADDR));
+ }else if (irq_stat & (HTU_ISR_TORD|HTU_ISR_PT)){
+ AMAZON_TPE_EMSG("Time Out %8x\n", readl(HTU_INFTIMEOUT_ADDR));
+ }else if (irq_stat & HTU_ISR_IT){
+ AMAZON_TPE_EMSG("Interrupt Test\n");
+ }else if (irq_stat & HTU_ISR_OTOC){
+ AMAZON_TPE_EMSG("Overflow of Time Out Counter\n");
+ }else if (irq_stat & HTU_ISR_ONEC){
+ AMAZON_TPE_EMSG("Overflow of No Entry Counter\n");
+ }else{
+ AMAZON_TPE_EMSG("unknown HTU interrupt occurs %8x\n", irq_stat);
+ }
+
+}
+#endif //AMAZON_ATM_DEBUG
+
+#ifdef AMAZON_TPE_TEST_AAL5_INT
+/*
+ * Brief: Interrupt handler for AAL5
+ *
+ * Parameters: irq - CPPN for this interrupt
+ * data - Device ID for this interrupt
+ * regs - Register file
+ *
+ */
+void amazon_atm_aal5_isr(int irq, void *data, struct pt_regs *regs)
+{
+ volatile u32 irq_stat=0;
+
+ // Read interrupt status register
+ irq_stat = readl(AAL5_SISR0_ADDR);
+ if (irq_stat){
+ AMAZON_TPE_EMSG("A5S status: %8x\n",irq_stat);
+ //Clear interrupt in CBM and ICU
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_SSRC0_ADDR);
+ mask_and_ack_amazon_irq(AMAZON_AAL5_INT);
+ }
+ irq_stat = readl(AAL5_RISR0_ADDR);
+ if (irq_stat){
+ AMAZON_TPE_EMSG("A5R status: %8x\n",irq_stat);
+ //Clear interrupt in CBM and ICU
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_RSRC0_ADDR);
+ mask_and_ack_amazon_irq(AMAZON_AAL5_INT);
+ }
+}
+#endif //AMAZON_TPE_TEST_AAL5_INT
+
+/*
+ * Brief: Interrupt handler for CBM
+ *
+ * Parameters: irq - CPPN for this interrupt
+ * data - Device ID for this interrupt
+ * regs - Register file
+ *
+ * Description:
+ * This is the MIPS interrupt handler for the CBM. It processes incoming cells
+ * for SWIE queues.
+ */
+void amazon_atm_cbm_isr(int irq, void *data, struct pt_regs *regs)
+{
+ u32 irq_stat=0;
+ u8 qid=0;
+
+ // Read interrupt status register
+ while ( (irq_stat = readl(CBM_INTINF0_ADDR))){
+ AMAZON_TPE_DMSG("CBM INT status: %8x\n",irq_stat);
+ //Clear interrupt in CBM and ICU
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR);
+ qid = (u8) ((irq_stat & CBM_INTINF0_QID_MASK)>>CBM_INTINF0_QID_SHIFT);
+#ifdef AMAZON_TPE_SCR
+ if (irq_stat & CBM_INTINF0_EF){
+ amazon_atm_a5r((void*)qid);
+ }
+#endif
+ // Check if Any Cell Arrived
+ if (irq_stat & CBM_INTINF0_ACA) {
+ amazon_atm_swex((void *)irq_stat);
+ }
+ //TX AAL5 PDU discard
+ if (irq_stat & CBM_INTINF0_OPF){
+ if ( (qid) < CBM_RX_OFFSET ){
+ g_atm_dev.mib_counter.tx_drop++;
+ }
+ queue_statics(qid, QS_HW_DROP);
+ }
+ if (irq_stat & (CBM_INTINF0_ERR|CBM_INTINF0_Q0E|CBM_INTINF0_Q0I|CBM_INTINF0_RDE)){
+ AMAZON_TPE_EMSG("CBM INT status: %8x\n",irq_stat);
+ if (irq_stat & CBM_INTINF0_ERR){
+ AMAZON_TPE_EMSG("CBM Error: FPI Bus Error\n");
+ }
+ if (irq_stat & CBM_INTINF0_Q0E){
+ AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n");
+ }
+ if (irq_stat & CBM_INTINF0_Q0I){
+ AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n");
+ }
+ if (irq_stat & CBM_INTINF0_RDE){
+ AMAZON_TPE_EMSG("CBM Error: Read Empty Queue %u\n",qid);
+ dump_qd(qid);
+ }
+ }
+ }
+ mask_and_ack_amazon_irq(AMAZON_CBM_INT);
+}
+
+/* Brief: check the status word after AAL SDU after reassembly
+ */
+static inline void check_aal5_error(u8 stw0, u8 stw1, int qid)
+{
+ if (stw0 & AAL5_STW0_MFL){
+ AMAZON_TPE_DMSG("Maximum Frame Length\n");
+ g_atm_dev.queues[qid].aal5VccOverSizedSDUs++;
+ }
+ if (stw0 & AAL5_STW0_CRC){
+ AMAZON_TPE_DMSG("CRC\n");
+ g_atm_dev.queues[qid].aal5VccCrcErrors++;
+ }
+#ifdef AMAZON_ATM_DEBUG_RX
+ AMAZON_TPE_EMSG("qid:%u stw0:%8x stw1:%8x\n",qid,stw0,stw1);
+#endif
+}
+
+/* Brief: Process DMA rx data
+ * Parameters:
+ dma_dev: pointer to the dma_device_info, provided by us when register the dma device
+ * Return: no
+ * Description: DMA interrupt handerl with OoS support. It is called when there is some data in rx direction.
+ *
+ */
+//507261:tc.chen void atm_process_dma_rx(struct dma_device_info* dma_dev)
+void __system atm_process_dma_rx(struct dma_device_info* dma_dev)
+{
+ u8 * head=NULL;
+ u32 length=0;
+ u8 stw0=0;
+ u8 stw1=0;
+
+ struct sk_buff * skb=NULL;
+ struct atm_vcc * vcc=NULL;
+ int qid=0;
+#ifdef AMAZON_ATM_DEBUG_RX
+ static int dma_rx_dump=0;
+ static u32 seq=0;
+
+ seq++;
+ if (dma_rx_dump>0){
+ printk("\n=========================[%u]=========================\n",seq);
+ }
+#endif
+ length=dma_device_read(dma_dev,&head,(void**)&skb);
+ AMAZON_TPE_DMSG("receive %8p[%u] from DMA\n", head,length);
+ if (head == NULL||length<=0) {
+ AMAZON_TPE_DMSG("dma_read null \n");
+ goto error_exit;
+ }
+
+ if (length > (g_atm_dev.aal5.rx_max_sdu+64)){
+ AMAZON_TPE_EMSG("received packet too large (%u)\n",length);
+ goto error_exit;
+ }
+ //check AAL5R trail for error and qid
+ //last byte is qid
+ length--;
+ qid = (int) head[length];
+ AMAZON_TPE_DMSG("head[%u] qid %u\n",length, qid);
+ //STW0 is always 4 bytes before qid
+ length -= 4;
+ stw0 = head[length]&0xff;
+ AMAZON_TPE_DMSG("head[%u] stw0 %8x\n",length, stw0);
+ //position of STW1 depends on the BE bits
+ length = length-4 + (stw0&AAL5_STW0_BE);
+ stw1 = head[length]&0xff;
+ AMAZON_TPE_DMSG("head[%u] stw1 %8x\n",length, stw1);
+ if ( (stw0 & AAL5_STW0_MASK) || (stw1 & AAL5_STW1_MASK) ){
+ //AAL5 Error
+ check_aal5_error(stw0, stw1,qid);
+ goto error_exit;
+ }
+ //make data pointers consistent
+ //UU + CPI
+ length -= 2;
+ AMAZON_TPE_DMSG("packet length %u\n", length);
+
+ //error: cannot restore the qid
+ if (valid_qid(qid) != 1){
+ AMAZON_TPE_EMSG("received frame in invalid qid %u!\n", qid);
+ goto error_exit;
+ }
+ vcc = g_atm_dev.queues[qid].vcc;
+ if (vcc == NULL){
+ AMAZON_TPE_EMSG("received frame in invalid vcc, qid=%u!\n",qid);
+ goto error_exit;
+ }
+ if (skb == NULL){
+ AMAZON_TPE_EMSG("cannot restore skb pointer!\n");
+ goto error_exit;
+ }
+ skb_put(skb,length);
+ skb->stamp = xtime;
+ g_atm_dev.queues[qid].access_time=xtime;
+ if ((*g_atm_dev.queues[qid].push)(vcc,skb,0)){
+ g_atm_dev.mib_counter.rx_drop++;
+ queue_statics(qid, QS_SW_DROP);
+ }else{
+ g_atm_dev.mib_counter.rx++;
+ adsl_led_flash();//joelin adsl led
+ queue_statics(qid, QS_PKT);
+ AMAZON_TPE_DMSG("push successful!\n");
+ }
+#ifdef AMAZON_ATM_DEBUG_RX
+ if (dma_rx_dump>0){
+ printk("\nOK packet [dump=%u] length=%u\n",dma_rx_dump,length);
+ dump_skb(length+7, head);
+ }
+ if (dma_rx_dump >0) dma_rx_dump--;
+#endif
+ return ;
+error_exit:
+#ifdef AMAZON_ATM_DEBUG_RX
+ if ( (head!=NULL) && (length >0)){
+ AMAZON_TPE_EMSG("length=%u\n",length);
+ dump_skb(length+5, head);
+ }
+ dma_rx_dump++;
+#endif
+ g_atm_dev.mib_counter.rx_err++;
+ queue_statics(qid, QS_ERR);
+ /*
+ if (vcc){
+ (*g_atm_dev.queues[qid].push)(vcc,skb,1);
+ }
+ */
+ if (skb != NULL) {
+ dev_kfree_skb_any(skb);
+ }
+ return;
+}
+
+/*Brief: ISR for DMA pseudo interrupt
+ *Parameter:
+ dma_dev: pointer to the dma_device_info, provided by us when register the dma device
+ intr_status:
+ RCV_INT: rx data available
+ TX_BUF_FULL_INT: tx descriptor run out of
+ TRANSMIT_CPT_INT: tx descriptor available again
+ *Return:
+ 0 for success???
+ */
+//507261:tc.chen int amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status)
+int __system amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status)
+{
+ AMAZON_TPE_DMSG("status:%u\n",intr_status);
+ switch (intr_status) {
+ case RCV_INT:
+ atm_process_dma_rx(dma_dev);
+ break;
+ case TX_BUF_FULL_INT:
+ //TX full: no descriptors
+ atm_dma_full();
+ break;
+ case TRANSMIT_CPT_INT:
+ //TX free: at least one descriptor
+ atm_dma_free();
+ break;
+ default:
+ AMAZON_TPE_EMSG("unknown status!\n");
+ }
+ return 0;
+}
+
+/*Brief: free buffer for DMA tx
+ *Parameter:
+ dataptr: pointers to data buffer
+ opt: optional parameter, used to convey struct skb pointer, passwd in dma_device_write
+ *Return:
+ 0 for success???
+ *Description:
+ called by DMA module to release data buffer after DMA tx transaction
+ *Error:
+ cannot restore skb pointer
+ */
+int amazon_atm_free_tx(u8*dataptr, void* opt)
+{
+ struct sk_buff *skb;
+ if (opt){
+ AMAZON_TPE_DMSG("free skb%8p\n",opt);
+ skb = (struct sk_buff *)opt;
+ amazon_atm_free_tx_skb(skb);
+ }else{
+ AMAZON_TPE_EMSG("BUG: cannot restore skb pointer!\n");
+ }
+ return 0;
+}
+
+/*Brief: allocate buffer & do alignment
+ */
+inline struct sk_buff * amazon_atm_alloc_buffer(int len)
+{
+ struct sk_buff *skb;
+ skb = dev_alloc_skb(len+16);
+ if (skb){
+ //alignment requriements (4x32 bits (16 bytes) boundary)
+ alloc_align_16(skb);
+ }
+ return skb;
+}
+
+/*Brief: allocate buffer for DMA rx
+ *Parameter:
+ len: length
+ opt: optional data to convey the skb pointer, which will be returned to me in interrupt handler,
+ *Return:
+ pointer to buffer, NULL means error?
+ *Description:
+ must make sure byte alignment
+ */
+
+u8* amazon_atm_alloc_rx(int len, int* offset, void **opt)
+{
+ struct sk_buff *skb;
+ *offset = 0;
+ skb = amazon_atm_alloc_buffer(len);
+ if (skb){
+ AMAZON_TPE_DMSG("alloc skb->data:%8p len:%u\n",skb->data,len);
+ *(struct sk_buff**)opt = skb;
+ }else{
+ AMAZON_TPE_DMSG("no memory for receiving atm frame!\n");
+ return NULL;
+ }
+ return skb->data;
+}
+
+
+
+
+/* Brief: Allocate kernel memory for sending a datagram.
+ * Parameters
+ * vcc virtual connection
+ * size data buffer size
+ * Return:
+ * NULL fail
+ * sk_buff a pointer to a sk_buff
+ * Description:
+ * This function can allocate our own additional memory for AAL5S inbound
+ * header (8bytes). We have to replace the protocol default one (alloc_tx in /net/atm/common.c)
+ * when we open the device.
+ * byte alignment is done is DMA driver.
+ */
+struct sk_buff *amazon_atm_alloc_tx(struct atm_vcc *vcc,unsigned int size)
+{
+ struct sk_buff *skb;
+
+ if (!dma_may_send(DMA_TX_CH0)){
+ AMAZON_TPE_EMSG("no DMA descriptor available!\n");
+ return NULL;
+ }
+ //AAL5 inbound header space + alignment extra buffer
+ size+=8+AAL5S_INBOUND_HEADER;
+
+ if (atomic_read(&vcc->tx_inuse) && !atm_may_send(vcc,size)) {
+ AMAZON_TPE_EMSG("Sorry tx_inuse = %u, size = %u, sndbuf = %u\n",
+ atomic_read(&vcc->tx_inuse),size,vcc->sk->sndbuf);
+ return NULL;
+ }
+
+ skb = amazon_atm_alloc_buffer(size);
+ if (skb == NULL){
+ AMAZON_TPE_EMSG("no memory\n");
+ return NULL;
+ }
+ AMAZON_TPE_DMSG("dev_alloc_skb(%u) = %x\n", skb->len, (u32)skb);
+ AMAZON_TPE_DMSG("tx_inuse %u += %u\n",atomic_read(&vcc->tx_inuse),skb->truesize);
+ atomic_add(skb->truesize+ATM_PDU_OVHD,&vcc->tx_inuse);
+
+ //reserve for AAL5 inbound header
+ skb_reserve(skb,AAL5S_INBOUND_HEADER);
+ return skb;
+}
+
+
+/* Brief: change per queue QSB setting according to vcc qos parameters
+ * Paramters:
+ * vcc: atm_vcc pointer
+ * qid: CBM queue id (1~15)
+ * Return:
+ */
+static inline void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, int qid)
+{
+ qsb_qptl_t qptl;
+ qsb_qvpt_t qvpt;
+ u32 tmp=0;
+ unsigned int qsb_clk;
+
+ qsb_clk = amazon_get_fpi_hz()>>1;
+
+ AMAZON_TPE_EMSG("Class=%u MAX_PCR=%u PCR=%u MIN_PCR=%u SCR=%u MBS=%u CDV=%u\n"
+ ,qos->txtp.traffic_class
+ ,qos->txtp.max_pcr
+ ,qos->txtp.pcr
+ ,qos->txtp.min_pcr
+ ,qos->txtp.scr
+ ,qos->txtp.mbs
+ ,qos->txtp.cdv
+ );
+
+ // PCR limiter
+ if (qos->txtp.max_pcr == 0){
+ qptl.bit.tprs = 0; /* 0 disables the PCR limiter */
+ }else {
+ // peak cell rate will be slightly lower than requested (maximum rate / pcr)= (qsbclock/2^3 * timestep/4)/pcr
+ tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.max_pcr ) + 1;
+ // check if an overfow occured
+ if (tmp > QSB_TP_TS_MAX) {
+ AMAZON_TPE_EMSG("max_pcr is too small, max_pcr:%u tprs:%u\n",qos->txtp.max_pcr, tmp);
+ qptl.bit.tprs = QSB_TP_TS_MAX;
+ }else{
+ qptl.bit.tprs = tmp;
+ }
+ }
+ //WFQ
+ if (qos->txtp.traffic_class == ATM_CBR || qos->txtp.traffic_class ==ATM_VBR_RT){
+ // real time queue gets weighted fair queueing bypass
+ qptl.bit.twfq = 0;
+ }else if (qos->txtp.traffic_class ==ATM_VBR_NRT ||qos->txtp.traffic_class ==ATM_UBR_PLUS ){
+ // wfq calculation here are based on virtual cell rates, to reduce granularity for large rates
+ // wfq factor is maximum cell rate / garenteed cell rate.
+ //qptl.bit.twfq = g_atm_dev.qsb.min_cr * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr;
+ if (qos->txtp.min_pcr == 0) {
+ AMAZON_TPE_EMSG("<warning> MIN_PCR should not be zero\n");
+ qptl.bit.twfq = QSB_WFQ_NONUBR_MAX;
+ }else{
+ tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr;
+ if (tmp == 0 ){
+ qptl.bit.twfq = 1;
+ }else if (tmp > QSB_WFQ_NONUBR_MAX){
+ AMAZON_TPE_EMSG("min_pcr is too small, min_pcr:%u twfq:%u\n",qos->txtp.min_pcr, tmp);
+ qptl.bit.twfq = QSB_WFQ_NONUBR_MAX;
+ }else{
+ qptl.bit.twfq = tmp;
+ }
+ }
+ }else if (qos->txtp.traffic_class == ATM_UBR){
+ // ubr bypass, twfq set to maximum value
+ qptl.bit.twfq = QSB_WFQ_UBR_BYPASS;
+ }else{
+ //tx is diabled, treated as UBR
+ AMAZON_TPE_EMSG("<warning> unsupported traffic class %u \n", qos->txtp.traffic_class);
+ qos->txtp.traffic_class = ATM_UBR;
+ qptl.bit.twfq = QSB_WFQ_UBR_BYPASS;
+ }
+
+ //SCR Leaky Bucket Shaper VBR.0/VBR.1
+ if (qos->txtp.traffic_class ==ATM_VBR_RT || qos->txtp.traffic_class ==ATM_VBR_NRT){
+ if (qos->txtp.scr == 0){
+ //SCR == 0 disable the shaper
+ qvpt.bit.ts = 0;
+ qvpt.bit.taus = 0;
+ }else{
+ //CLP
+ if (vcc->atm_options&ATM_ATMOPT_CLP){
+ //CLP1
+ qptl.bit.vbr = 1;
+ }else{
+ //CLP0
+ qptl.bit.vbr = 0;
+ }
+ //TS and TauS
+ tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.scr ) + 1;
+ if (tmp > QSB_TP_TS_MAX) {
+ AMAZON_TPE_EMSG("scr is too small, scr:%u ts:%u\n",qos->txtp.scr, tmp);
+ qvpt.bit.ts = QSB_TP_TS_MAX;
+ }else{
+ qvpt.bit.ts = tmp;
+ }
+ tmp = (qos->txtp.mbs - 1)*(qvpt.bit.ts - qptl.bit.tprs)/64;
+ if (tmp > QSB_TAUS_MAX){
+ AMAZON_TPE_EMSG("mbs is too large, mbr:%u taus:%u\n",qos->txtp.mbs, tmp);
+ qvpt.bit.taus = QSB_TAUS_MAX;
+ }else if (tmp == 0){
+ qvpt.bit.taus = 1;
+ }else{
+ qvpt.bit.taus = tmp;
+ }
+ }
+ }else{
+ qvpt.w0 = 0;
+ }
+ //write the QSB Queue Parameter Table (QPT)
+ AMAZON_WRITE_REGISTER_L(QSB_QPT_SET_MASK,QSB_RTM_ADDR);
+ AMAZON_WRITE_REGISTER_L(qptl.w0, QSB_RTD_ADDR);
+ AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QPT<<QSB_TABLESEL_SHIFT)
+ | QSB_RAMAC_REG_LOW
+ | QSB_WRITE
+ | qid
+ ,QSB_RAMAC_ADDR);
+ //write the QSB Queue VBR Parameter Table (QVPT)
+ AMAZON_WRITE_REGISTER_L(QSB_QVPT_SET_MASK,QSB_RTM_ADDR);
+ AMAZON_WRITE_REGISTER_L(qvpt.w0, QSB_RTD_ADDR);
+ AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QVPT<<QSB_TABLESEL_SHIFT)
+ | QSB_RAMAC_REG_LOW
+ | QSB_WRITE
+ | qid
+ ,QSB_RAMAC_ADDR);
+ AMAZON_TPE_EMSG("tprs:%u twfq:%u ts:%u taus:%u\n",qptl.bit.tprs,qptl.bit.twfq,qvpt.bit.ts,qvpt.bit.taus);
+}
+
+/*
+ * Brief: create/change CBM queue descriptor
+ * Parameter:
+ * vcc: atm_vcc pointer
+ * qid: CBM queue id (1~15)
+ */
+static inline void set_qd(struct atm_vcc *vcc, u32 qid)
+{
+ u32 tx_config=0,rx_config=0;
+ u32 itf = (u32) vcc->itf;
+ u32 dma_qos=0;
+ u8 * qd_addr=NULL;
+
+ tx_config|=CBM_QD_W3_WM_EN|CBM_QD_W3_CLPt;
+ //RT: check if the connection is a real time connection
+ if (vcc->qos.txtp.traffic_class == ATM_CBR || vcc->qos.txtp.traffic_class == ATM_VBR_RT){
+ tx_config|= CBM_QD_W3_RT;
+ }else{
+ tx_config|= CBM_QD_W3_AAL5; //don't set the AAL5 flag if it is a RT service
+ }
+ rx_config = tx_config;
+
+ if(vcc->qos.aal == ATM_AAL5){
+ //QoS: DMA QoS according to the traffic class
+ switch (vcc->qos.txtp.traffic_class){
+ case ATM_CBR: dma_qos = CBR_DMA_QOS;break;
+ case ATM_VBR_RT: dma_qos = VBR_RT_DMA_QOS;break;
+ case ATM_VBR_NRT: dma_qos = VBR_NRT_DMA_QOS;break;
+ case ATM_UBR_PLUS: dma_qos = UBR_PLUS_DMA_QOS;break;
+ case ATM_UBR: dma_qos = UBR_DMA_QOS;break;
+ }
+
+ //TX: upstream, AAL5(EPD or PPD), NOINT, SBid
+ tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK);
+ //RX: DMA QoS, downstream, no interrupt, AAL5(EPD, PPD), NO INT, HCR
+#ifdef AMAZON_TPE_SCR
+ rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_EOF;
+#else
+ rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_NOINT|CBM_QD_W3_HCR;
+#endif
+ }else {
+ //should be AAL0
+ //upstream, NOINT, SBid
+ tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK);
+ //RX: downstream, ACA interrupt,
+ rx_config |= CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_ACA;
+ }
+
+ //Threshold: maximum threshold for tx/rx queue, which is adjustable in steps of 64 cells
+ tx_config |= ( (divide_by_64_round_up(tx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK;
+ rx_config |= ( (divide_by_64_round_up(rx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK;
+
+ qd_addr = (u8*) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
+ //TX
+ AMAZON_WRITE_REGISTER_L(tx_config, (qd_addr+qid*CBM_QD_SIZE + 0xc));
+ AMAZON_WRITE_REGISTER_L(0, (qd_addr+qid*CBM_QD_SIZE + 0x8));
+ //RX
+ AMAZON_WRITE_REGISTER_L(rx_config, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0xc));
+ AMAZON_WRITE_REGISTER_L(0, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0x8));
+}
+/*
+ * Brief: add HTU table entry
+ * Parameter:
+ * vpi.vci:
+ * qid: CBM queue id (DEST is qid + CBM_RX_OFFSET)
+ * idx: entry id (starting from zero to 14)
+ * Return:
+ * 0: sucessful
+ * EIO: HTU table entry cannot be written
+ */
+
+inline int set_htu_entry(u8 vpi, u16 vci, u8 qid, u8 idx)
+{
+ int i = 0;
+ u32 tmp1=0;
+ while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < 1024) i++;
+ if (i > 1024)
+ {
+ AMAZON_TPE_EMSG("timeout\n");
+ return -EIO;
+ }
+ // write address register,
+ AMAZON_WRITE_REGISTER_L(idx, HTU_RAMADDR_ADDR);
+ // configure transmit queue
+ tmp1 = vpi<<24|vci<<8;
+ tmp1|= HTU_RAMDAT1_VCON // valid connection the entry is not validated here !!!!!!!!!!!!!!!!
+ |HTU_RAMDAT1_VCI3 // vci3 -> oam queue
+ |HTU_RAMDAT1_VCI4 // vci4 -> oam queue
+ |HTU_RAMDAT1_VCI6 // vci6 -> rm queue
+ |HTU_RAMDAT1_PTI4 // pti4 -> oam queue
+ |HTU_RAMDAT1_PTI5; // pti5 -> oam queue
+
+ // ramdat 1 (in params & oam handling)
+ AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT1_ADDR);
+ // ramdat 2 (out params & oam handling)
+ tmp1 = ((qid+CBM_RX_OFFSET)&HTU_RAMDAT2_QID_MASK)
+ |HTU_RAMDAT2_PTI6
+ |HTU_RAMDAT2_PTI7
+ |HTU_RAMDAT2_F4U
+ |HTU_RAMDAT2_F5U
+ ;
+ AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT2_ADDR);
+ wmb();
+ // write HTU entry
+ AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR, HTU_RAMCMD_ADDR);
+ return 0;
+}
+/*
+ * Brief: add HTU table entry
+ * Parameter:
+ * vcc: atm_vcc pointer
+ * qid: CBM queue id
+ * Return:
+ * 0: sucessful
+ * EIO: HTU table entry cannot be written
+ */
+inline static int set_htu(struct atm_vcc *vcc, u32 qid)
+{
+ return set_htu_entry(vcc->vpi, vcc->vci, qid, (qid - CBM_DEFAULT_Q_OFFSET));
+}
+
+/*
+ * Brief: allocate a queue
+ * Return:
+ * <=0 no available queues
+ * >0 qid
+ */
+static int atm_allocate_q(short itf)
+{
+ int i;
+ u32 tmp1=0;
+ int qid=0;
+ amazon_atm_port_t * dev;
+ dev = &g_atm_dev.ports[itf];
+ //find start queue id for this interface
+ for (i=0; i< itf; i++)
+ {
+ qid+= g_atm_dev.ports[i].max_conn;
+ }
+ // apply default queue offset ( oam, free cell queue, others, rm )
+ qid += CBM_DEFAULT_Q_OFFSET;
+ tmp1 = qid;
+ // search for a free queue
+ while ( (qid<tmp1+dev->max_conn)
+ && ( g_atm_dev.queues[qid].free != 1)) {
+ qid++;;
+ }
+ // if none was found, send failure message and return
+ if ( tmp1+dev->max_conn == qid)
+ {
+ return -EFAULT;
+ }
+ return qid;
+
+}
+/* Brief: open a aal5 or aal0 connection
+ */
+static int atm_open(struct atm_vcc *vcc, push_back_t push)
+{
+ int err=0;
+ int qid=0;
+ amazon_atm_port_t * port = & g_atm_dev.ports[vcc->itf];
+ unsigned long flags;
+ /***************** check bandwidth ******************/
+ /* 511045:linmars change ATM_VBR_NRT to use scr instead of pcr */
+ if ((vcc->qos.txtp.traffic_class==ATM_CBR&&vcc->qos.txtp.max_pcr>port->tx_rem_cr)
+ ||(vcc->qos.txtp.traffic_class==ATM_VBR_RT&&vcc->qos.txtp.max_pcr>port->tx_rem_cr)
+ ||(vcc->qos.txtp.traffic_class==ATM_VBR_NRT&&vcc->qos.txtp.scr>port->tx_rem_cr)
+ ||(vcc->qos.txtp.traffic_class==ATM_UBR_PLUS&&vcc->qos.txtp.min_pcr>port->tx_rem_cr)
+ ) {
+ AMAZON_TPE_EMSG("not enough bandwidth left (%u) cells per seconds \n",port->tx_rem_cr);
+ return -EINVAL;
+ }
+ if ( (qid = amazon_atm_find_vpivci(vcc->vpi, vcc->vci)) >0 ){
+ AMAZON_TPE_EMSG("vpi:%u vci:%u is alreay open on queue:%u\n", vcc->vpi, vcc->vci, qid);
+ return -EADDRINUSE;
+ }
+
+ /***************** allocate entry queueID for this port *****************/
+ if ( (qid=atm_allocate_q(vcc->itf)) <= 0){
+ AMAZON_TPE_EMSG("port: %u max:%u qid: %u\n", vcc->itf, port->max_conn, qid);
+ AMAZON_TPE_EMSG("no availabel connections for this port:%u\n",vcc->itf);
+ return -EINVAL;
+ }
+ /**************QSB parameters and CBM descriptors*************/
+ set_qsb(vcc, &vcc->qos, qid);
+ set_qd(vcc, qid);
+ mb();
+ err=set_htu(vcc,qid);
+ if (err){
+ AMAZON_TPE_EMSG("set htu entry fails %u\n",err);
+ return err;
+ }
+ /************set internal mapping*************/
+ local_irq_save(flags);
+ g_atm_dev.queues[qid].free = 0;
+ g_atm_dev.queues[qid].vcc = vcc;
+ g_atm_dev.queues[qid].push = push;
+ g_atm_dev.queues[qid+CBM_RX_OFFSET].free = 0;
+ g_atm_dev.queues[qid+CBM_RX_OFFSET].vcc = vcc;
+ g_atm_dev.queues[qid+CBM_RX_OFFSET].push = push;
+ /******************reserve bandwidth**********************/
+ if (vcc->qos.txtp.traffic_class == ATM_CBR){
+ //CBR, real time connection, reserve PCR
+ port->tx_cur_cr += vcc->qos.txtp.max_pcr;
+ port->tx_rem_cr -= vcc->qos.txtp.max_pcr;
+ }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){
+ //VBR_RT, real time connection, reserve PCR
+ port->tx_cur_cr += vcc->qos.txtp.max_pcr;
+ port->tx_rem_cr -= vcc->qos.txtp.max_pcr;
+ }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){
+ //VBR_NRT, reserve SCR
+ port->tx_cur_cr += vcc->qos.txtp.pcr;
+ port->tx_rem_cr -= vcc->qos.txtp.pcr;
+ }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){
+ //UBR_PLUS, reserve MCR
+ port->tx_cur_cr += vcc->qos.txtp.min_pcr;
+ port->tx_rem_cr -= vcc->qos.txtp.min_pcr;
+ }
+ local_irq_restore(flags);
+ return err;
+}
+/* Brief: Open ATM connection
+ * Parameters: atm_vcc - Pointer to VCC data structure
+ * vpi - VPI value for new connection
+ * vci - VCI value for new connection
+ *
+ * Return: 0 - sucessful
+ * -ENOMEM - No memory available
+ * -EINVAL - No bandwidth/queue/ or unsupported AAL type
+ * Description:
+ * This function opens an ATM connection on a specific device/interface
+ *
+ */
+int amazon_atm_open(struct atm_vcc *vcc,push_back_t push)
+{
+ int err=0;
+
+ AMAZON_TPE_DMSG("vpi %u vci %u itf %u aal %u\n"
+ ,vcc->vpi
+ ,vcc->vci
+ ,vcc->itf
+ ,vcc->qos.aal
+ );
+
+ AMAZON_TPE_DMSG("tx cl %u bw %u mtu %u\n"
+ ,vcc->qos.txtp.traffic_class
+ ,vcc->qos.txtp.max_pcr
+ ,vcc->qos.txtp.max_sdu
+ );
+ AMAZON_TPE_DMSG("rx cl %u bw %u mtu %u\n"
+ ,vcc->qos.rxtp.traffic_class
+ ,vcc->qos.rxtp.max_pcr
+ ,vcc->qos.rxtp.max_sdu
+ );
+ if (vcc->qos.aal == ATM_AAL5 || vcc->qos.aal == ATM_AAL0){
+ err = atm_open(vcc,push);
+ }else{
+ AMAZON_TPE_EMSG("unsupported aal type %u\n", vcc->qos.aal);
+ err = -EPROTONOSUPPORT;
+ };
+ if (err == 0 ){
+ //replace the default memory allocation function with our own
+ vcc->alloc_tx = amazon_atm_alloc_tx;
+ set_bit(ATM_VF_READY,&vcc->flags);
+ }
+ return err;
+}
+
+/* Brief: Send ATM OAM cell
+ * Parameters: atm_vcc - Pointer to VCC data structure
+ * skb - Pointer to sk_buff structure, that contains the data
+ * Return: 0 - sucessful
+ * -ENOMEM - No memory available
+ * -EINVAL - Not supported
+ * Description:
+ * This function sends a cell over and ATM connection
+ * We always release the skb
+ * TODO: flags handling (ATM_OF_IMMED, ATM_OF_INRATE)
+ */
+int amazon_atm_send_oam(struct atm_vcc *vcc, void * cell, int flags)
+{
+ int err=0;
+ int qid=0;
+ struct amazon_atm_cell_header * cell_header;
+ // Get cell header
+ cell_header = (struct amazon_atm_cell_header*) cell;
+ if ((cell_header->bit.pti == ATM_PTI_SEGF5) || (cell_header->bit.pti == ATM_PTI_E2EF5)) {
+ qid = amazon_atm_find_vpivci( cell_header->bit.vpi, cell_header->bit.vci);
+ }else if (cell_header->bit.vci == 0x3 || cell_header->bit.vci == 0x4) {
+ //507281:tc.chen qid = amazon_atm_find_vpi((int) cell_header->bit.vpi);
+ // 507281:tc.chen start
+ u8 f4_vpi;
+ f4_vpi = cell_header->bit.vpi;
+ qid = amazon_atm_find_vpi(f4_vpi );
+ // 507281:tc.chen end
+ }else{
+ //non-OAM cells, always invalid
+ qid = -EINVAL;
+ }
+ if (qid == -EINVAL) {
+ err = -EINVAL;
+ AMAZON_TPE_EMSG("not valid AAL0 packet\n");
+ }else{
+ //send the cell using swie
+#ifdef TPE_LOOPBACK
+ err = amazon_atm_swin(AMAZON_ATM_OAM_Q_ID, cell);
+#else
+ err = amazon_atm_swin(qid, cell);
+#endif
+ }
+ //kfree(cell);
+ return err;
+}
+
+/* Brief: Send AAL5 frame through DMA
+ * Parameters: vpi - virtual path id
+ * vci - virtual circuit id
+ * clp - cell loss priority
+ * qid - CBM queue to be sent to
+ * skb - packet to be sent
+ * Return: 0 - sucessful
+ * -ENOMEM - No memory available
+ * -EINVAL - Not supported
+ * Description:
+ * This function sends a AAL5 frame over and ATM connection
+ * 1. make sure that the data is aligned to 4x32-bit boundary
+ * 2. provide the inbound data (CPCS-UU and CPI, not used here)
+ * 3. set CLPn
+ * 4. send the frame by DMA
+ * 5. release the buffer ???
+ ** use our own allocation alloc_tx
+ ** we make sure the alignment and additional memory
+ *** we always release the skb
+
+ */
+int amazon_atm_dma_tx(u8 vpi, u16 vci, u8 clp, u8 qid, struct sk_buff *skb)
+{
+ int err=0,need_pop=1;
+ u32 * data=NULL;
+ int nwrite=0;
+ struct sk_buff *skb_tmp;
+ u32 len=skb->len;
+
+ //AAL5S inbound header 8 bytes
+ if (skb->len > g_atm_dev.aal5.tx_max_sdu - AAL5S_INBOUND_HEADER) {
+ AMAZON_TPE_DMSG("tx_max_sdu:%u\n",g_atm_dev.aal5.tx_max_sdu);
+ AMAZON_TPE_DMSG("skb too large [%u]!\n",skb->len);
+ err = -EMSGSIZE;
+ goto atm_dma_tx_error_exit;
+ }
+
+ //Check the byte alignment requirement and header space
+ if ( ( ((u32)(skb->data)%16) !=AAL5S_INBOUND_HEADER)|| (skb_headroom(skb)<AAL5S_INBOUND_HEADER)){
+ //not aligned or no space for header, fall back to memcpy
+ skb_tmp = dev_alloc_skb(skb->len+16);
+ if (skb_tmp==NULL){
+ err = - ENOMEM;
+ goto atm_dma_tx_error_exit;
+ }
+ alloc_align_16(skb_tmp);
+ g_atm_dev.aal5.cnt_cpy++;
+ skb_reserve(skb_tmp,AAL5S_INBOUND_HEADER);
+ memcpy(skb_put(skb_tmp,skb->len), skb->data, skb->len);
+ amazon_atm_free_tx_skb(skb);
+ need_pop=0;
+ skb = skb_tmp;
+ }
+ //Provide AAL5S inbound header
+ data = (u32 *)skb_push(skb,8);
+ data[0] = __be32_to_cpu(vpi<<20|vci<<4|clp);
+ data[1] = __be32_to_cpu(g_atm_dev.aal5.padding_byte<<8|qid);
+
+ len = skb->len;
+
+ //send through DMA
+ AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[0]);
+ AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[1]);
+ AMAZON_TPE_DMSG("about to call dma_write len: %u\n", len);
+ nwrite=dma_device_write( &g_dma_dev,skb->data,len,skb);
+ if (nwrite != len) {
+ //DMA descriptors full
+// AMAZON_TPE_EMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len);
+ AMAZON_TPE_DMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len);
+ err = -EAGAIN;
+ goto atm_dma_tx_drop_exit;
+ }
+ AMAZON_TPE_DMSG("just finish call dma_write\n");
+ //release in the "dma done" call-back
+ return 0;
+atm_dma_tx_error_exit:
+ g_atm_dev.mib_counter.tx_err++;
+ queue_statics(qid, QS_ERR);
+ goto atm_dma_tx_exit;
+
+atm_dma_tx_drop_exit:
+ g_atm_dev.mib_counter.tx_drop++;
+ queue_statics(qid, QS_SW_DROP);
+atm_dma_tx_exit:
+ if (need_pop){
+ amazon_atm_free_tx_skb(skb);
+ }else{
+ dev_kfree_skb_any(skb);
+ }
+ return err;
+}
+
+/* Brief: Send AAL0/AAL5 packet
+ * Parameters: atm_vcc - Pointer to VCC data structure
+ * skb - Pointer to sk_buff structure, that contains the data
+ * Return: 0 - sucessful
+ * -ENOMEM - No memory available
+ * -EINVAL - Not supported
+ * Description:
+ * See amazon_atm_dma_tx
+ */
+int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb)
+{
+ int qid=0;
+ u8 clp=0;
+ int err=0;
+ u32 wm=0;
+
+ if (vcc == NULL || skb == NULL){
+ AMAZON_TPE_EMSG("invalid parameter\n");
+ return -EINVAL;
+ }
+ ATM_SKB(skb)->vcc = vcc;
+ qid = amazon_atm_get_queue(vcc);
+ if (valid_qid(qid) != 1) {
+ AMAZON_TPE_EMSG("invalid vcc!\n");
+ err = -EINVAL;
+ goto atm_send_err_exit;
+ }
+
+ //Send AAL0 using SWIN
+ if (vcc->qos.aal == ATM_AAL0){
+#ifdef TPE_LOOPBACK
+ err=amazon_atm_swin((qid+CBM_RX_OFFSET), skb->data);
+#else
+ err=amazon_atm_swin(qid, skb->data);
+#endif
+ if (err){
+ goto atm_send_err_exit;
+ }
+ goto atm_send_exit;
+ }
+
+ //Should be AAl5
+ //MIB counter
+ g_atm_dev.mib_counter.tx++;
+ adsl_led_flash();//joelin adsl led
+ queue_statics(qid, QS_PKT);
+
+#ifdef AMAZON_CHECK_LINK
+ //check adsl link
+ if (adsl_link_status == 0){
+ //link down
+ AMAZON_TPE_DMSG("ADSL link down, discarded!\n");
+ err=-EFAULT;
+ goto atm_send_drop_exit;
+ }
+#endif
+ clp = (vcc->atm_options&ATM_ATMOPT_CLP)?1:0;
+ //check watermark first
+ wm = readl(CBM_WMSTAT0_ADDR);
+ if ( (wm & (1<<qid))
+ ||( (vcc->qos.txtp.traffic_class != ATM_CBR
+ &&vcc->qos.txtp.traffic_class != ATM_VBR_RT)
+ &(wm & (CBM_WM_NRT_MASK | (clp&CBM_WM_CLP1_MASK)) ))){
+ //wm hit: discard
+ AMAZON_TPE_DMSG("watermark hit, discarded!\n");
+ err=-EFAULT;
+ goto atm_send_drop_exit;
+ }
+#ifdef TPE_LOOPBACK
+ return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, (qid+CBM_RX_OFFSET),skb);
+#else
+ return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, qid,skb);
+#endif
+
+atm_send_exit:
+ amazon_atm_free_tx_skb_vcc(vcc,skb);
+ return 0;
+
+atm_send_drop_exit:
+ g_atm_dev.mib_counter.tx_drop++;
+ queue_statics(qid,QS_SW_DROP);
+atm_send_err_exit:
+ amazon_atm_free_tx_skb_vcc(vcc,skb);
+ return err;
+}
+
+/* Brief: Return ATM port related MIB
+ * Parameter: interface number
+ atm_cell_ifEntry_t
+ */
+int amazon_atm_cell_mib(atm_cell_ifEntry_t* to,u32 itf)
+{
+ g_atm_dev.mib_counter.htu_unp += readl(HTU_MIBCIUP);
+ to->ifInUnknownProtos = g_atm_dev.mib_counter.htu_unp;
+#ifdef AMAZON_TPE_READ_ARC
+ u32 reg_val=0;
+ meiDebugRead((AR_CELL0_ADDR+itf*4),&reg_val,1);
+ g_atm_dev.mib_counter.rx_cells += reg_val;
+ reg_val=0;
+ meiDebugWrite((AR_CELL0_ADDR+itf*4),&reg_val,1);
+ to->ifHCInOctets_h = (g_atm_dev.mib_counter.rx_cells * 53)>>32;
+ to->ifHCInOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff;
+
+ meiDebugRead((AT_CELL0_ADDR+itf*4),&reg_val,1);
+ g_atm_dev.mib_counter.tx_cells += reg_val;
+ reg_val=0;
+ meiDebugWrite((AT_CELL0_ADDR+itf*4),&reg_val,1);
+ to->ifHCOutOctets_h = (g_atm_dev.mib_counter.tx_cells * 53)>>32;
+ to->ifHCOutOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff;
+
+ meiDebugRead((AR_CD_CNT0_ADDR+itf*4),&reg_val,1);
+ g_atm_dev.mib_counter.rx_err_cells += reg_val;
+ reg_val=0;
+ meiDebugWrite((AR_CD_CNT0_ADDR+itf*4),&reg_val,1);
+ to->ifInErrors = g_atm_dev.mib_counter.rx_err_cells;
+
+ to->ifOutErrors = 0;
+#else
+ to->ifHCInOctets_h = 0;
+ to->ifHCInOctets_l = 0;
+ to->ifHCOutOctets_h = 0;
+ to->ifHCOutOctets_l = 0;
+ to->ifInErrors = 0;
+ to->ifOutErrors = 0;
+#endif
+ return 0;
+}
+
+/* Brief: Return ATM AAL5 related MIB
+ * Parameter:
+ atm_aal5_ifEntry_t
+ */
+int amazon_atm_aal5_mib(atm_aal5_ifEntry_t* to)
+{
+ u32 reg_l,reg_h;
+ //AAL5R received Octets from ATM
+ reg_l = readl(AAL5_RIOL_ADDR);
+ reg_h = readl(AAL5_RIOM_ADDR);
+ g_atm_dev.mib_counter.rx_cnt_h +=reg_h;
+ if (reg_l + g_atm_dev.mib_counter.rx_cnt_l < reg_l){
+ g_atm_dev.mib_counter.rx_cnt_h++;
+ }
+
+ g_atm_dev.mib_counter.rx_cnt_l+= reg_l;
+ //AAL5S sent Octets to ATM
+ reg_l = readl(AAL5_SOOL_ADDR);
+ reg_h = readl(AAL5_SOOM_ADDR);
+ g_atm_dev.mib_counter.tx_cnt_h +=reg_h;
+ if (reg_l + g_atm_dev.mib_counter.tx_cnt_l < reg_l){
+ g_atm_dev.mib_counter.tx_cnt_h++;
+ }
+ g_atm_dev.mib_counter.tx_cnt_l+= reg_l;
+
+
+ g_atm_dev.mib_counter.tx_ppd += readl(CBM_AAL5ODIS_ADDR);
+ g_atm_dev.mib_counter.rx_drop += readl(CBM_AAL5IDIS_ADDR);
+
+ //store
+ to->ifHCInOctets_h = g_atm_dev.mib_counter.rx_cnt_h;
+ to->ifHCInOctets_l = g_atm_dev.mib_counter.rx_cnt_l;
+ to->ifHCOutOctets_h = g_atm_dev.mib_counter.tx_cnt_h;
+ to->ifHCOutOctets_l = g_atm_dev.mib_counter.tx_cnt_l;
+ to->ifOutDiscards = g_atm_dev.mib_counter.tx_drop;
+ to->ifInDiscards = g_atm_dev.mib_counter.rx_drop;
+
+ //Software provided counters
+ //packets passed to higher layer
+ to->ifInUcastPkts = g_atm_dev.mib_counter.rx;
+ //packets passed from higher layer
+ to->ifOutUcastPkts = g_atm_dev.mib_counter.tx;
+ //number of wrong downstream packets
+ to->ifInErrors = g_atm_dev.mib_counter.rx_err;
+ //number of wrong upstream packets
+ to->ifOutErros = g_atm_dev.mib_counter.tx_err;
+
+ return 0;
+}
+/* Brief: Return ATM AAL5 VCC related MIB from internale use
+ * Parameter:
+ * qid
+ * atm_aal5_vcc_t
+ */
+static int __amazon_atm_vcc_mib(int qid, atm_aal5_vcc_t* to)
+{
+ //aal5VccCrcErrors
+ to->aal5VccCrcErrors = g_atm_dev.queues[qid].aal5VccCrcErrors;
+ to->aal5VccOverSizedSDUs =g_atm_dev.queues[qid].aal5VccOverSizedSDUs;
+ to->aal5VccSarTimeOuts = 0; //not supported yet
+ return 0;
+}
+/* Brief: Return ATM AAL5 VCC related MIB from vpi/vci
+ * Parameter: atm_vcc
+ * atm_aal5_vcc_t
+ */
+int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to)
+{
+ int qid=0;
+ int err=0;
+ qid = amazon_atm_find_vpivci(vpi, vci);
+ if (qid >0 ){
+ err = __amazon_atm_vcc_mib(qid,to);
+ }else{
+ return -EINVAL;
+ }
+ return err;
+}
+
+
+/* Brief: Return ATM AAL5 VCC related MIB
+ * Parameter: atm_vcc
+ * atm_aal5_vcc_t
+ */
+int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t* to)
+{
+ int qid=0;
+ int err=0;
+ qid = amazon_atm_get_queue(vcc);
+ if (qid >0 ){
+ err = __amazon_atm_vcc_mib(qid,to);
+ }else{
+ return -EINVAL;
+ }
+ return err;
+}
+
+/* Brief: Close ATM connection
+ * Parameters: atm_vcc - Pointer to VCC data structure
+ * Return: no
+ * Description:
+ * This function closes the given ATM connection
+ */
+void amazon_atm_close(struct atm_vcc *vcc){
+ int i;
+ int qid=0;
+ u32 tmp1;
+ u8 * qd_addr;
+ unsigned long flags;
+ if (vcc == NULL){
+ AMAZON_TPE_EMSG("invalid parameter. vcc is null\n");
+ return;
+ }
+ u32 itf = (u32) vcc->itf;
+ //release bandwidth
+ if (vcc->qos.txtp.traffic_class == ATM_CBR){
+ g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr;
+ g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr;
+ }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){
+ g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr;
+ g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr;
+ }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){
+ g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.pcr;
+ g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.pcr;
+ }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){
+ g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.min_pcr;
+ g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.min_pcr;
+ }
+
+ qid = amazon_atm_get_queue(vcc);
+ if (qid == -EINVAL){
+ AMAZON_TPE_EMSG("unknown vcc %u.%u.%u\n", vcc->itf, vcc->vpi, vcc->vci);
+ return;
+ }
+ local_irq_save(flags);
+ //Disable HTU entry
+ i=0;
+ while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < HTU_RAM_ACCESS_MAX) i++;
+ if (i == HTU_RAM_ACCESS_MAX){
+ AMAZON_TPE_EMSG("HTU RAM ACCESS out of time\n");
+ }
+
+ // write address register
+ AMAZON_WRITE_REGISTER_L(qid - CBM_DEFAULT_Q_OFFSET, HTU_RAMADDR_ADDR);
+ // invalidate the connection
+ AMAZON_WRITE_REGISTER_L(0, HTU_RAMDAT1_ADDR);
+ // write command
+ AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR,HTU_RAMCMD_ADDR);
+
+ qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
+#ifdef AMAZON_ATM_DEBUG
+ tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x8) & 0xffff;
+ AMAZON_TPE_DMSG("TX queue has %u cells \n", tmp1);
+ tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x08)&0xffff;
+ AMAZON_TPE_DMSG("RX queue has %u cells \n", tmp1);
+#endif
+ // set threshold of txqueue to 0
+ tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x0c);
+ tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK);
+ AMAZON_WRITE_REGISTER_L(tmp1, (qd_addr+qid*CBM_QD_SIZE+0x0c));
+ // set threshold of rxqueue to 0
+ tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c);
+ tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK);
+ AMAZON_WRITE_REGISTER_L(tmp1,(qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c));
+
+ //clear internal mapping
+ amazon_atm_clear_vcc(qid);
+ amazon_atm_clear_vcc(qid+CBM_RX_OFFSET);
+
+ local_irq_restore(flags);
+}
+
+
+/* Brief: initialize internal data structure
+ */
+static void atm_constructor(amazon_atm_dev_t * dev)
+{
+ int i;
+ memset(dev,0,sizeof(amazon_atm_dev_t));
+ atm_init_parameters(dev);
+ //internal: queue "free" flag
+ for(i=1;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
+ //dev->queues[i].vcc=NULL;
+ dev->queues[i].free = 1;
+ }
+ for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
+ dev->ports[i].tx_rem_cr = dev->ports[i].tx_max_cr;
+ }
+ //MIB
+ atomic_set(&dev->dma_tx_free_0,1); //initially there should be free descriptors
+}
+
+/* Brief: return round up base-2 logarithm
+ */
+static inline int get_log_2(u32 value)
+{
+ int i=0,j=1;
+ while (i<11){
+ if (j>=value) break;
+ j=j<<1;
+ i++;
+ }
+ AMAZON_TPE_DMSG("round up base-2 logarithm of %u is %u\n", value, i);
+ return i;
+}
+
+/* Brief: TPE hardware initialization
+ * Parameter: specifiy the configurations of the hardware
+ */
+static inline int atm_init_hard(amazon_atm_dev_t * dev)
+{
+ int i;
+ u32 tmp1, tmp2, tmp3;
+ u8 * mem_addr=NULL;
+ u8 * qd_addr=NULL;
+ //PMU power on the module 1st
+ *(AMAZON_PMU_PWDCR) = (*AMAZON_PMU_PWDCR) | (AMAZON_PMU_PWDCR_TPE);
+ //Reset the module
+ *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_TPE);
+ mb();
+ mdelay(100);
+ *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~(AMAZON_RST_REQ_TPE));
+ mb();
+
+ unsigned long qsb_clk = amazon_get_fpi_hz()>>1;
+ /*********allocate & arrange memory for CBM *********/
+ if (dev->cbm.mem_addr == NULL){
+ dev->cbm.allocated = 1;
+ mem_addr = (u8 *)__get_free_pages(GFP_KERNEL, get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1));
+ if (mem_addr != NULL){
+ dev->cbm.mem_addr = mem_addr;
+ } else {
+ goto init_no_mem;
+ }
+ }
+ if (dev->cbm.qd_addr == NULL){
+#ifdef CONFIG_USE_VENUS
+ //to work around a bug, bit15 of QDOFF address should be 1,Aug4, 2004
+ //thus, we allocate 64k memory
+ qd_addr = (u8 *)__get_free_pages(GFP_KERNEL, 4);
+ if (qd_addr != NULL) {
+ dev->cbm.qd_addr_free = (u8*) (((unsigned long) qd_addr));
+ dev->cbm.qd_addr = (u8*) (((unsigned long) qd_addr) | 0x8000);
+ }else{
+ goto init_no_mem;
+ }
+#else //CONFIG_USE_VENUS
+ qd_addr = (u8 *)kmalloc( CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM, GFP_KERNEL);
+ if (qd_addr != NULL) {
+ dev->cbm.qd_addr = qd_addr;
+ }else {
+ goto init_no_mem;
+ }
+#endif //CONFIG_USE_VENUS
+ }
+//#ifndef CONFIG_MIPS_UNCACHED
+ mem_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.mem_addr);
+ qd_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.qd_addr);
+//#endif
+ //CBM reset cell queue memory, 64 bytes / cell
+ memset_io(mem_addr, 0, CBM_CELL_SIZE * dev->cbm.free_cell_cnt);
+ //make a link list, last 4 bytes is pointer
+ for(i=1;i<dev->cbm.free_cell_cnt;i++){
+ AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * i)),(mem_addr + CBM_CELL_SIZE * (i-1) + 0x3c));
+ }
+ //reset queue descriptor
+ memset_io(qd_addr, 0, CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM);
+ //init word 0-2 of q0 (free cell list)
+ //address of last cell
+ AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * (dev->cbm.free_cell_cnt-1))), qd_addr);
+ //address of first cell
+ AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr)), (qd_addr + 4));
+ //no. of free cells
+ AMAZON_WRITE_REGISTER_L(dev->cbm.free_cell_cnt,(qd_addr + 8));
+ //init q descriptor for OAM receiving
+ AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (divide_by_64_round_up(oam_q_threshold)&0xff)<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c));
+// AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (u32)oam_q_threshold<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c));
+ //config CBM
+ //set offset address and threshold
+ AMAZON_WRITE_REGISTER_L(CPHYSADDR(qd_addr), CBM_QDOFF_ADDR);
+ AMAZON_WRITE_REGISTER_L(((dev->cbm.nrt_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_NRTTHR_ADDR);
+ AMAZON_WRITE_REGISTER_L(((dev->cbm.clp0_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP0THR_ADDR);
+ AMAZON_WRITE_REGISTER_L(((dev->cbm.clp1_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP1THR_ADDR);
+ //config interrupts
+ AMAZON_WRITE_REGISTER_L( CBM_IMR_MASK & (~(CBM_IMR_ACA|CBM_IMR_Q0E|CBM_IMR_Q0I|CBM_IMR_RDE|CBM_IMR_OPF|CBM_IMR_ERR
+#ifdef AMAZON_ATM_DEBUG
+ |CBM_IMR_DISC|CBM_IMR_QFD|CBM_IMR_NFCA|CBM_IMR_CLP1TR|CBM_IMR_CLP0TR|CBM_IMR_NRTTR|CBM_IMR_QTR
+#endif
+#ifdef AMAZON_TPE_SCR
+ |CBM_IMR_EF
+#endif
+ )), CBM_IMR0_ADDR);
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR);
+
+ //HTU
+ //RAM entry for number of possible connections per interface
+ tmp1 = dev->ports[0].max_conn?dev->ports[0].max_conn-1:0;
+ AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR);
+ for(i=1;i<AMAZON_ATM_PORT_NUM;i++){
+ tmp1+=dev->ports[i].max_conn;
+ AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR + 4 * i);
+ }
+ dev->cbm.max_q_off = tmp1+1;
+ //Queue ID for OAM/RM/Other cells
+ AMAZON_WRITE_REGISTER_L (AMAZON_ATM_OAM_Q_ID, HTU_DESTOAM_ADDR);
+ AMAZON_WRITE_REGISTER_L( AMAZON_ATM_RM_Q_ID, HTU_DESTRM_ADDR);
+ AMAZON_WRITE_REGISTER_L( AMAZON_ATM_OTHER_Q_ID, HTU_DESTOTHER_ADDR);
+ //Timeout
+ AMAZON_WRITE_REGISTER_L((u32) HTUTIMEOUT, HTU_TIMEOUT_ADDR);
+#ifdef AMAZON_ATM_DEBUG
+ AMAZON_WRITE_REGISTER_L((u32) HTU_ISR_MASK
+ &(~(HTU_ISR_NE|HTU_ISR_TORD|HTU_ISR_OTOC|HTU_ISR_ONEC|HTU_ISR_PNE|HTU_ISR_PT)), HTU_IMR0_ADDR);
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS|SRC_SRE_ENABLE|AMAZON_HTU_INT,HTU_SRC0_ADDR);
+#endif
+ //QSB
+ //global setting, TstepC, SBL, Tau
+ //Tau
+ AMAZON_WRITE_REGISTER_L(dev->qsb.tau, QSB_TAU_ADDR);
+ //SBL
+ AMAZON_WRITE_REGISTER_L(dev->qsb.sbl, QSB_SBL_ADDR);
+ //tstep
+ AMAZON_WRITE_REGISTER_L(dev->qsb.tstepc>>1, QSB_CONFIG_ADDR);
+
+ //port settting
+ for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
+ if ( (dev->ports[i].enable) && (dev->ports[i].tx_max_cr!=0) ){
+ tmp1 = ((qsb_clk * dev->qsb.tstepc) >>1) / dev->ports[i].tx_max_cr;
+ tmp2 = tmp1 / 64; //integer value of Tsb
+ tmp3 = tmp1%64 + 1; //fractional part of Tsb
+ //carry over to integer part (?)
+ if (tmp3 == 64) {
+ tmp3 = 0;
+ tmp2++;
+ }
+ if (tmp2 == 0){
+ tmp2 = 1;
+ tmp3 = 1;
+ }
+ //1. set mask 2. write value to data transfer register 3. start the transfer
+ //SCT(FracRate)
+ AMAZON_WRITE_REGISTER_L(QSB_SET_SCT_MASK, QSB_RTM_ADDR);
+ AMAZON_WRITE_REGISTER_L(tmp3,QSB_RTD_ADDR);
+ AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SCT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR);
+ //SPT(SBV + PN + IntRage)
+ AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_MASK, QSB_RTM_ADDR);
+ AMAZON_WRITE_REGISTER_L(QSB_SPT_SBVALID|tmp2|(i<<16),QSB_RTD_ADDR);
+ AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR);
+
+
+ }
+ }
+
+ //SWIE: Setup Service Request Control Registers to enable interrupts
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR);
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR);
+
+ wmb();
+#ifdef AMAZON_TPE_TEST_AAL5_INT
+ AMAZON_WRITE_REGISTER_L(AAL5R_ISR_FE,AAL5_RIMR0_ADDR);
+ AMAZON_WRITE_REGISTER_L(0, AAL5_SIMR0_ADDR);
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_SSRC0_ADDR);
+ AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_RSRC0_ADDR);
+#endif //AMAZON_TPE_TEST_AAL5_INT
+
+ AMAZON_WRITE_REGISTER_L(dev->aal5.tx_max_sdu,AAL5_SMFL_ADDR);
+ AMAZON_WRITE_REGISTER_L(dev->aal5.rx_max_sdu,AAL5_RMFL_ADDR);
+ AMAZON_WRITE_REGISTER_L(AAL5_SCMD_MODE_POLL // enable polling mode
+ |AAL5_SCMD_SS
+ |AAL5_SCMD_AR
+ ,AAL5_SCMD_ADDR);
+ //start CBM
+ AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR);
+ wmb();
+ return 0;
+init_no_mem:
+ if (mem_addr != NULL) free_pages((unsigned long)mem_addr,get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1));
+
+#ifdef CONFIG_USE_VENUS
+ //to work around a bug, bit15 of QDOFF address should be 1
+ if (qd_addr != NULL) free_pages((unsigned long)qd_addr,4);
+#else //CONFIG_USE_VENUS
+ if (qd_addr != NULL) kfree(qd_addr);
+#endif //CONFIG_USE_VENUS
+ return -ENOMEM;
+}
+
+/*
+ * Brief: Create entry in /proc for status information
+ */
+void atm_create_proc(void)
+{
+ create_proc_read_entry("amazon_atm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_ATM);
+ create_proc_read_entry("amazon_atm_mib", 0,NULL, amazon_atm_read_procmem,(void*)PROC_MIB);
+ create_proc_read_entry("amazon_atm_vcc", 0,NULL, amazon_atm_read_procmem,(void*)PROC_VCC);
+#if 0
+ create_proc_read_entry("amazon_atm_aal5", 0,NULL, amazon_atm_read_procmem,(void*)PROC_AAL5);
+ create_proc_read_entry("amazon_atm_cbm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_CBM);
+ create_proc_read_entry("amazon_atm_htu", 0,NULL, amazon_atm_read_procmem,(void*)PROC_HTU);
+ create_proc_read_entry("amazon_atm_qsb", 0,NULL, amazon_atm_read_procmem,(void*)PROC_QSB);
+ create_proc_read_entry("amazon_atm_swie", 0,NULL, amazon_atm_read_procmem,(void*)PROC_SWIE);
+#endif
+}
+
+/*
+ * Brief: Delete entry in /proc for status information
+ */
+void atm_delete_proc(void)
+{
+ remove_proc_entry("amazon_atm", NULL);
+ remove_proc_entry("amazon_atm_mib", NULL);
+ remove_proc_entry("amazon_atm_vcc", NULL);
+#if 0
+ remove_proc_entry("amazon_atm_aal5", NULL);
+ remove_proc_entry("amazon_atm_cbm", NULL);
+ remove_proc_entry("amazon_atm_htu", NULL);
+ remove_proc_entry("amazon_atm_qsb", NULL);
+ remove_proc_entry("amazon_atm_swie", NULL);
+#endif
+}
+/* Brief: Initialize ATM module
+ * Parameters: no
+ * Return: &g_atm_dev - sucessful
+ * NULL - fails:
+ * 1. invalid parameter
+ * 2. No memory available
+ * Description:
+ * This function configure the TPE components according to the input info,
+ * -CBM
+ * -HTU
+ * -QSB
+ * -AAL5
+ *
+ */
+amazon_atm_dev_t * amazon_atm_create(void)
+{
+ int i;
+ AMAZON_TPE_DMSG("atm_init\n");
+ /************initialize global data structure****************/
+ atm_constructor(&g_atm_dev);
+ /***********allocate kernel resources****************/
+ //bottom halfs for SWEX
+ swex_start_task.routine = amazon_atm_swex;
+ swex_start_task.data = NULL;
+ swex_complete_task.routine = amazon_atm_swex_push;
+ swex_complete_task.data = NULL;
+#ifdef AMAZON_TPE_SCR
+ a5r_task.routine = amazon_atm_a5r;
+ a5r_task.data = NULL;
+#endif //AMAZON_TPE_SCR
+ //SWIN semaphore
+ sema_init(&(g_atm_dev.swie.in_sem), 1);
+ //SWIE lock
+ clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
+ //SWIE wait queue
+ init_waitqueue_head(&(g_atm_dev.swie.sleep));
+ atm_create_proc();
+
+ //register DMA
+ memset(&g_dma_dev,0,sizeof(struct dma_device_info));
+ strcpy(g_dma_dev.device_name,"TPE");
+ g_dma_dev.weight=1;
+ g_dma_dev.num_tx_chan=2;
+ g_dma_dev.num_rx_chan=2;
+ g_dma_dev.ack=1;
+ g_dma_dev.tx_burst_len=4;
+ g_dma_dev.rx_burst_len=4;
+ //DMA TX
+
+ for(i=0;i<1;i++){
+ g_dma_dev.tx_chan[i].weight=QOS_DEFAULT_WGT;
+ g_dma_dev.tx_chan[i].desc_num=10;
+ g_dma_dev.tx_chan[i].packet_size=g_atm_dev.aal5.tx_max_sdu + AAL5S_INBOUND_HEADER;
+ g_dma_dev.tx_chan[i].control=1;
+ }
+ //DMA RX
+ for(i=0;i<2;i++){
+ g_dma_dev.rx_chan[i].weight=QOS_DEFAULT_WGT;
+ /* BingTao's suggestion, change from 5->10 will prevent packet loss in NO_TX_INT mode */
+ g_dma_dev.rx_chan[i].desc_num=10;
+ g_dma_dev.rx_chan[i].packet_size=(g_atm_dev.aal5.rx_max_sdu + AAL5R_TRAILER_LEN+0x10f)&(~0xf);
+ g_dma_dev.rx_chan[i].control=1;
+ }
+ g_dma_dev.intr_handler=amazon_atm_dma_handler;
+ g_dma_dev.buffer_alloc=amazon_atm_alloc_rx;
+ g_dma_dev.buffer_free=amazon_atm_free_tx;
+ dma_device_register(&g_dma_dev);
+/***********intialize the atm hardware ****************/
+ if ( atm_init_hard(&g_atm_dev) != 0){
+ return NULL;
+ }
+ //start CBM
+ AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR);
+ wmb();
+
+ //Start HTU
+ AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR);
+ wmb();
+
+
+ // Register interrupts for insertion and extraction
+ request_irq(AMAZON_SWIE_INT, amazon_atm_swie_isr, SA_INTERRUPT, "tpe_swie", NULL);
+ request_irq(AMAZON_CBM_INT, amazon_atm_cbm_isr, SA_INTERRUPT, "tpe_cbm", NULL);
+#ifdef AMAZON_ATM_DEBUG
+ request_irq(AMAZON_HTU_INT , amazon_atm_htu_isr, SA_INTERRUPT, "tpe_htu", NULL);
+#endif
+#ifdef AMAZON_TPE_TEST_AAL5_INT
+ request_irq(AMAZON_AAL5_INT, amazon_atm_aal5_isr, SA_INTERRUPT, "tpe_aal5", NULL);
+#endif
+ return &g_atm_dev;
+}
+
+/* Brief: clean up atm
+ * Parameters: no
+ * Return: no
+ * Description:
+ * Disable the device.
+ */
+void amazon_atm_cleanup(void){
+ int i;
+ clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
+ wake_up(&g_atm_dev.swie.sleep);
+ up(&g_atm_dev.swie.in_sem);
+ // diable SWIE interrupts
+ AMAZON_WRITE_REGISTER_L(0, SWIE_ISRC_ADDR);
+ AMAZON_WRITE_REGISTER_L(0, SWIE_ESRC_ADDR);
+ wmb();
+
+ // Disable schedulers ( including interrupts )-----------------------
+ for (i = 0; i < AMAZON_ATM_PORT_NUM; i++);
+ {
+ AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_SBVALID_MASK, QSB_RTM_ADDR);
+ AMAZON_WRITE_REGISTER_L( 0 ,QSB_RTD_ADDR);
+ AMAZON_WRITE_REGISTER_L( (QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)
+ | QSB_RAMAC_REG_LOW
+ | QSB_WRITE
+ | i,
+ QSB_RAMAC_ADDR);
+ }
+ // disable QSB_Interrupts
+ AMAZON_WRITE_REGISTER_L( 0, QSB_IMR_ADDR);
+ AMAZON_WRITE_REGISTER_L( 0, QSB_SRC_ADDR);
+ // disable CBM interrupts
+ AMAZON_WRITE_REGISTER_L( 0 , CBM_IMR0_ADDR);
+ AMAZON_WRITE_REGISTER_L( 0 , CBM_SRC0_ADDR);
+ // set CBM start bit to 0
+ AMAZON_WRITE_REGISTER_L(0,CBM_CFG_ADDR);
+ // request hardware extraction of queue 0, wich should force the CBM
+ // to recognize that the start bit is not set
+ AMAZON_WRITE_REGISTER_L(CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
+ // write frame extraction command into the hw extract command register
+ AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
+ // disable htu
+ // disable all HTU interrupts
+ AMAZON_WRITE_REGISTER_L(0 ,HTU_IMR0_ADDR);
+ AMAZON_WRITE_REGISTER_L(0 ,HTU_SRC0_ADDR);
+
+ if (g_atm_dev.cbm.allocated){
+ free_pages((unsigned long)g_atm_dev.cbm.mem_addr, get_log_2(((CBM_CELL_SIZE * g_atm_dev.cbm.free_cell_cnt) >>PAGE_SHIFT)+1));
+#ifdef CONFIG_USE_VENUS
+ //to work around a bug, bit15 of QDOFF address should be 1
+ free_pages((unsigned long)g_atm_dev.cbm.qd_addr_free,4);
+#else //CONFIG_USE_VENUS
+ kfree(g_atm_dev.cbm.qd_addr);
+#endif //CONFIG_USE_VENUS
+ }
+ atm_delete_proc();
+ // free interrupts for insertion and extraction
+ dma_device_unregister(&g_dma_dev);
+ free_irq(AMAZON_SWIE_INT, NULL);
+ free_irq(AMAZON_CBM_INT, NULL);
+#ifdef AMAZON_ATM_DEBUG
+ free_irq(AMAZON_HTU_INT, NULL);
+#endif
+#ifdef AMAZON_TPE_TEST_AAL5_INT
+ free_irq(AMAZON_AAL5_INT, NULL);
+#endif
+
+}
+
+/************************ ATM network interface ***********************************************/
+/* Brief: getsockopt
+ */
+int amazon_atm_getsockopt(struct atm_vcc *vcc, int level, int optname, char *optval, int optlen)
+{
+ int err=0;
+ atm_aal5_vcc_t mib_vcc;
+ AMAZON_TPE_DMSG("1\n");
+ switch (optname){
+ case SO_AMAZON_ATM_MIB_VCC:
+ AMAZON_TPE_DMSG("2\n");
+ err = amazon_atm_vcc_mib(vcc, &mib_vcc);
+ AMAZON_TPE_DMSG("%u\n",mib_vcc.aal5VccCrcErrors);
+ err = copy_to_user((void *)optval,&mib_vcc, sizeof(mib_vcc));
+ AMAZON_TPE_DMSG("err %u\n",err);
+ break;
+ default:
+ return -EFAULT;
+ }
+ return err;
+}
+
+/* Brief: IOCTL
+ */
+
+int amazon_atm_ioctl(struct atm_dev *dev,unsigned int cmd,void *arg)
+{
+ int err=0;
+ //MIB
+ atm_cell_ifEntry_t mib_cell;
+ atm_aal5_ifEntry_t mib_aal5;
+ atm_aal5_vcc_x_t mib_vcc;
+ if (_IOC_TYPE(cmd) != AMAZON_ATM_IOC_MAGIC) return -ENOTTY;
+ if (_IOC_NR(cmd) > AMAZON_ATM_IOC_MAXNR) return -ENOTTY;
+
+ if (_IOC_DIR(cmd) & _IOC_READ)
+ err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd));
+ else if (_IOC_DIR(cmd) & _IOC_WRITE)
+ err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd));
+ if (err) {
+ AMAZON_TPE_EMSG("acess verification fails \n");
+ return -EFAULT;
+ }
+ switch(cmd) {
+ case AMAZON_ATM_MIB_CELL:
+ err = amazon_atm_cell_mib(&mib_cell,(u32)arg);
+ if (err==0){
+ err = __copy_to_user((void *)arg,&mib_cell,sizeof(mib_cell));
+ }else{
+ AMAZON_TPE_EMSG("cannot get MIB ATM_CELL\n");
+ }
+ break;
+ case AMAZON_ATM_MIB_AAL5:
+ err = amazon_atm_aal5_mib(&mib_aal5);
+ if (err==0){
+ err=__copy_to_user(arg, &mib_aal5, sizeof(mib_aal5));
+ }else{
+ AMAZON_TPE_EMSG("cannot get MIB ATM_AAL5\n");
+ }
+ break;
+ case AMAZON_ATM_MIB_VCC:
+ err=__copy_from_user(&mib_vcc,arg, sizeof(mib_vcc));
+ AMAZON_TPE_DMSG("return of copy_from_user %x\n",err);
+ err = amazon_atm_vcc_mib_x(mib_vcc.vpi, mib_vcc.vci, &(mib_vcc.mib_vcc));
+ if (err==0){
+ err=__copy_to_user(arg, &mib_vcc, sizeof(mib_vcc));
+ }else{
+ AMAZON_TPE_EMSG("cannot get MIB ATM_VCC\n");
+ }
+
+ default:
+ return -ENOTTY;
+ }
+ return err;
+}
+/* Brief: return a link list of OAM related time stamp info
+ * Parameter: none
+ * Return:
+ a link list of "struct oam_last_activity" data
+ * Description:
+ Each time, a F4/F5 cell or AAL5 packet is received, the time stamp is updated.
+ Through this call, u get a list of this time stamp for all active connection.
+ Please note that u have read-only access.
+ */
+const struct oam_last_activity* get_oam_time_stamp()
+{
+ int i,j;
+ for(i=CBM_DEFAULT_Q_OFFSET+CBM_RX_OFFSET,j=0;i<CBM_RX_OFFSET+CBM_DEFAULT_Q_OFFSET+AMAZON_ATM_MAX_VCC_NUM;i++){
+ if (g_atm_dev.queues[i].free != 1 && g_atm_dev.queues[i].vcc != NULL){
+ //active connection
+ if (j !=0 ){
+ g_oam_time_stamp[j-1].next = &g_oam_time_stamp[j];
+ }
+ g_oam_time_stamp[j].vpi = g_atm_dev.queues[i].vcc->vpi;
+ g_oam_time_stamp[j].vci = g_atm_dev.queues[i].vcc->vci;
+ g_oam_time_stamp[j].stamp = g_atm_dev.queues[i].access_time;
+ g_oam_time_stamp[j].next = NULL;
+ j++;
+ }
+ }
+ if (j==0) {
+ return NULL;
+ }else{
+ return g_oam_time_stamp;
+ }
+}
+
+
+/* Brief: call back routine for rx
+ * Parameter:
+ * vcc atm_vcc pointer
+ * skb data if no error
+ err error flag, 0: no error, 1:error
+ * Return:
+ * 0
+ * <>0 cannot push up
+ * Description:
+ * release the packet if cannot push up
+ */
+static int amazon_atm_net_push(struct atm_vcc *vcc,struct sk_buff *skb, int err)
+{
+ if (err){
+ if (vcc && vcc->stats) {
+ atomic_inc(&vcc->stats->rx_err);
+ }
+ }else{
+ ATM_SKB(skb)->vcc = vcc;
+
+ if (!atm_charge(vcc, skb->truesize)){
+ //no space this vcc
+ AMAZON_TPE_EMSG("no space for this vcc\n");
+ dev_kfree_skb_any(skb);
+ return -ENOMEM;
+ }
+ atomic_inc(&vcc->stats->rx);
+ AMAZON_TPE_DMSG("push to vcc\n");
+ vcc->push(vcc,skb);
+ }
+ return 0;
+}
+int amazon_atm_net_send_oam(struct atm_vcc*vcc, void *cell, int flags)
+{
+ return amazon_atm_send_oam(vcc,cell,flags);
+}
+
+int amazon_atm_net_send(struct atm_vcc *vcc,struct sk_buff *skb)
+{
+ int err=0;
+ if (vcc->qos.aal == ATM_AAL0 || vcc->qos.aal == ATM_AAL5) {
+ err=amazon_atm_send(vcc,skb);
+ }else{
+ //not supported
+ err = -EPROTONOSUPPORT;
+ }
+ if (err){
+ atomic_inc(&vcc->stats->tx_err);
+ }else{
+ atomic_inc(&vcc->stats->tx);
+ }
+ AMAZON_TPE_DMSG("sent, tx_inuse:%u\n", atomic_read(&vcc->tx_inuse));
+ return err;
+}
+
+int amazon_atm_net_open(struct atm_vcc *vcc,short vpi, int vci)
+{
+ vcc->itf = (int) vcc->dev->dev_data;
+ vcc->vpi = vpi;
+ vcc->vci = vci;
+ return(amazon_atm_open(vcc,amazon_atm_net_push));
+}
+
+static int amazon_atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flgs)
+{
+ int qid;
+
+ if (vcc == NULL || qos == NULL){
+ AMAZON_TPE_EMSG("invalid parameters\n");
+ return -EINVAL;
+ }
+ qid = amazon_atm_get_queue(vcc);
+ if (valid_qid(qid) != 1) {
+ AMAZON_TPE_EMSG("no vcc connection opened\n");
+ return -EINVAL;
+ }
+ set_qsb(vcc,qos,qid);
+ return 0;
+}
+
+static struct atmdev_ops amazon_atm_ops = {
+ open: amazon_atm_net_open,
+ close: amazon_atm_close,
+ ioctl: amazon_atm_ioctl,
+ send: amazon_atm_net_send,
+ send_oam: amazon_atm_net_send_oam,
+// getsockopt: amazon_atm_getsockopt,
+ change_qos: amazon_atm_change_qos,
+// proc_read: amazon_atm_proc_read,
+ owner: THIS_MODULE,
+}; // ATM device callback functions
+
+/*
+ * brief "/proc" function
+ */
+int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data)
+{
+ int buf_off=0; /* for buf */
+ int i=0,j=0;
+ int type= (u32)data;//which module
+ atm_aal5_ifEntry_t mib_aal5;
+ atm_cell_ifEntry_t mib_cell;
+ atm_aal5_vcc_t mib_vcc;
+ switch(type){
+ case PROC_MIB:
+ //MIB counter
+ amazon_atm_aal5_mib(&mib_aal5);
+ //TX:
+ buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Upstream =========\n");
+ buf_off+=sprintf(buf+buf_off,"received %u (pkts) from upper layer\n", mib_aal5.ifOutUcastPkts);
+ buf_off+=sprintf(buf+buf_off,"errors: %u (pkts)\n",mib_aal5.ifOutErros);
+ buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n", mib_aal5.ifOutDiscards);
+ buf_off+=sprintf(buf+buf_off,"transmitted: %x-%x (bytes) \n",
+ mib_aal5.ifHCOutOctets_h, mib_aal5.ifHCOutOctets_l);
+ //RX:
+ buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Downstream =========\n");
+ buf_off+=sprintf(buf+buf_off,"received %x-%x (bytes)\n",
+ mib_aal5.ifHCInOctets_h,mib_aal5.ifHCInOctets_l);
+ buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n",mib_aal5.ifInDiscards);
+ buf_off+=sprintf(buf+buf_off,"errors: %u (ptks)\n",mib_aal5.ifInErrors);
+ buf_off+=sprintf(buf+buf_off,"passed %u (ptks) to upper layer\n",mib_aal5.ifInUcastPkts);
+
+ //Cell level
+ buf_off+=sprintf(buf+buf_off,"\n============= ATM Cell =========\n");
+ amazon_atm_cell_mib(&mib_cell,0);
+#ifdef AMAZON_TPE_READ_ARC
+ buf_off+=sprintf(buf+buf_off,"Port 0: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l);
+ buf_off+=sprintf(buf+buf_off,"Port 0: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l);
+ buf_off+=sprintf(buf+buf_off,"Port 0: downstream errors: %u (cells)\n",mib_cell.ifInErrors);
+ amazon_atm_cell_mib(&mib_cell,1);
+ buf_off+=sprintf(buf+buf_off,"Port 1: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l);
+ buf_off+=sprintf(buf+buf_off,"Port 1: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l);
+ buf_off+=sprintf(buf+buf_off,"Port 1: downstream errors: %u (cells)\n",mib_cell.ifInErrors);
+#endif
+ buf_off+=sprintf(buf+buf_off,"HTU discards: %u (cells)\n",mib_cell.ifInUnknownProtos);
+
+ buf_off+=sprintf(buf+buf_off,"\n====== Specials =====\n");
+ buf_off+=sprintf(buf+buf_off,"AAL5S PPD: %u (cells)\n",g_atm_dev.mib_counter.tx_ppd);
+#ifdef AMAZON_TPE_SCR
+ buf_off+=sprintf(buf+buf_off,"Reassembly wait: %u \n",g_a5r_wait);
+#endif
+ break;
+ case PROC_ATM:
+ //Interface (Port)
+ buf_off+=sprintf(buf+buf_off,"[Interfaces]\n");
+ for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
+ if (g_atm_dev.ports[i].enable==0){
+ buf_off+=sprintf(buf+buf_off,"\tport[%u] not in use\n",i);
+ }else{
+ buf_off+=sprintf(buf+buf_off,"\tport[%u]\n\t\tmax_conn=%u\n"
+ ,i
+ ,g_atm_dev.ports[i].max_conn
+ );
+ buf_off+=sprintf(buf+buf_off,"\t\ttx_max=%u\n\t\trem=%u\n\t\tcur=%u\n"
+ ,g_atm_dev.ports[i].tx_max_cr
+ ,g_atm_dev.ports[i].tx_rem_cr
+ ,g_atm_dev.ports[i].tx_cur_cr
+ );
+ }
+
+ }
+ //Units Info
+ //AAL5
+ buf_off+=sprintf(buf+buf_off,"[AAL5]\n\tpad=%c(%x)\n\trx_mtu=%u\n\ttx_mtu=%u\n"
+ ,g_atm_dev.aal5.padding_byte
+ ,g_atm_dev.aal5.padding_byte
+ ,g_atm_dev.aal5.rx_max_sdu
+ ,g_atm_dev.aal5.tx_max_sdu
+ );
+ //CBM
+ buf_off+=sprintf(buf+buf_off,
+ "[CBM]\n\tnrt_thr=%u\n\tclp0_thr=%u\n\tclp1_thr=%u\n\ttx_q_threshold=%u\n\trx_q_threshold=%u\n\toam_q_threshold=%u\n\tfree_cell_cnt=%u\n"
+ ,g_atm_dev.cbm.nrt_thr
+ ,g_atm_dev.cbm.clp0_thr
+ ,g_atm_dev.cbm.clp1_thr
+ ,tx_q_threshold
+ ,rx_q_threshold
+ ,oam_q_threshold
+ ,g_atm_dev.cbm.free_cell_cnt
+ );
+ //QSB
+ buf_off+=sprintf(buf+buf_off,"[QSB]\n\ttau=%u\n\ttstepc=%u\n\tsbl=%u\n"
+ ,g_atm_dev.qsb.tau
+ ,g_atm_dev.qsb.tstepc
+ ,g_atm_dev.qsb.sbl
+ );
+ buf_off+=sprintf(buf+buf_off,"[Debugging]\n\taal5_need_copy=%u\n",g_atm_dev.aal5.cnt_cpy);
+ break;
+ case PROC_VCC:
+ for(i=CBM_DEFAULT_Q_OFFSET,j=0;i<g_atm_dev.cbm.max_q_off+CBM_DEFAULT_Q_OFFSET;i++){
+ if (g_atm_dev.queues[i].free!=1){
+ buf_off+=sprintf(buf+buf_off,"vcc[%u]\n\tvpi=%u vci=%u itf=%u qid=%u access_time=%u.%u\n"
+ ,j++
+ ,g_atm_dev.queues[i].vcc->vpi
+ ,g_atm_dev.queues[i].vcc->vci
+ ,g_atm_dev.queues[i].vcc->itf
+ ,i
+ ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_sec
+ ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_usec
+ );
+ buf_off+=sprintf(buf+buf_off,"\tqos_tx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n"
+ ,g_atm_dev.queues[i].vcc->qos.txtp.traffic_class
+ ,g_atm_dev.queues[i].vcc->qos.txtp.max_pcr
+ ,g_atm_dev.queues[i].vcc->qos.txtp.pcr
+ ,g_atm_dev.queues[i].vcc->qos.txtp.min_pcr
+ ,g_atm_dev.queues[i].vcc->qos.txtp.scr
+ ,g_atm_dev.queues[i].vcc->qos.txtp.mbs
+ ,g_atm_dev.queues[i].vcc->qos.txtp.cdv
+ );
+ buf_off+=sprintf(buf+buf_off,"\tqos_rx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n"
+ ,g_atm_dev.queues[i].vcc->qos.rxtp.traffic_class
+ ,g_atm_dev.queues[i].vcc->qos.rxtp.max_pcr
+ ,g_atm_dev.queues[i].vcc->qos.rxtp.pcr
+ ,g_atm_dev.queues[i].vcc->qos.rxtp.min_pcr
+ ,g_atm_dev.queues[i].vcc->qos.rxtp.scr
+ ,g_atm_dev.queues[i].vcc->qos.rxtp.mbs
+ ,g_atm_dev.queues[i].vcc->qos.rxtp.cdv
+ );
+ __amazon_atm_vcc_mib((i+CBM_RX_OFFSET),&mib_vcc);
+ buf_off+=sprintf(buf+buf_off,"\tCRC error=%u\n", mib_vcc.aal5VccCrcErrors);
+ buf_off+=sprintf(buf+buf_off,"\toversized packet=%u\n", mib_vcc.aal5VccOverSizedSDUs);
+#ifdef AMAZON_ATM_DEBUG
+ if ( valid_qid(i+CBM_RX_OFFSET)){
+ buf_off+=sprintf(buf+buf_off,"\tdownstream statics\n" );
+ buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_PKT]);
+ buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_ERR] );
+ buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_SW_DROP] );
+ }
+
+ buf_off+=sprintf(buf+buf_off,"\tupstream statics\n" );
+ buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i].qs[QS_PKT]);
+ buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i].qs[QS_ERR] );
+ buf_off+=sprintf(buf+buf_off,"\t\thw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_HW_DROP] );
+ buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_SW_DROP] );
+
+#endif
+
+ }
+
+ }
+ break;
+ default:
+ break;
+ }
+ if(buf_off>0) *eof = 1;
+ return buf_off;
+}
+
+#ifdef AMAZON_TPE_AAL5_RECOVERY
+extern int (*tpe_reset)(void);
+extern int (*tpe_start)(void);
+extern int (*tpe_inject)(void);
+/* Brief: Reset TPE hardware
+ * Description
+ * This is a wordaround for AAL5 bug. It tries to reset TPE.
+ * take care of software
+ * setup all previous connection
+ */
+int amazon_tpe_reset(void)
+{
+ struct atm_vcc * vcc;
+ int err=0;
+ int i;
+ u8 * qd_addr;
+ u32 reg_l, reg_h;
+ unsigned int a_cfg_value=0;
+ unsigned int a_cfg_old_value=0;
+ atm_aal5_ifEntry_t mib_aal5;
+ atm_cell_ifEntry_t mib_cell;
+
+ //make sure all cells transmitting out first
+ //Segmentation done
+ amazon_atm_aal5_mib(&mib_aal5);
+ reg_l = g_atm_dev.mib_counter.tx_cnt_l;
+ reg_h = g_atm_dev.mib_counter.tx_cnt_h;
+ while(1){
+ mdelay(10);
+ amazon_atm_aal5_mib(&mib_aal5);
+ if( (reg_l == g_atm_dev.mib_counter.tx_cnt_l) && (reg_h == g_atm_dev.mib_counter.tx_cnt_h) ){
+ break;
+ }
+ AMAZON_TPE_DMSG("AAL5 Segmentation still in progress!\n");
+ reg_l = g_atm_dev.mib_counter.tx_cnt_l;
+ reg_h = g_atm_dev.mib_counter.tx_cnt_h;
+ }
+ //QSB done
+ qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
+ for (i=1;i<15;i++){
+ while ( (err=readl(qd_addr+i*CBM_QD_SIZE+0x8)&0xffff) !=0 ){
+ mdelay(20);
+ AMAZON_TPE_DMSG("queue %u not empty (%u)\n",i,err);
+ }
+ }
+ //insurance for interfaces between Aware and CARB
+ mdelay(100);
+ amazon_atm_cell_mib(&mib_cell,0);
+ amazon_atm_cell_mib(&mib_cell,1);
+ amazon_atm_aal5_mib(&mib_aal5);
+
+ mb();
+ while ( (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) || (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) ){
+ AMAZON_TPE_EMSG("\nwaiting for AWARE");
+ AMAZON_TPE_EMSG(" BC0 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0));
+ AMAZON_TPE_EMSG(" BC1 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC1));
+ AMAZON_TPE_EMSG("\n");
+ mdelay(1);
+ }
+ // disable AAI module
+ meiDebugRead(A_CFG_ADDR,&a_cfg_value,1);
+ a_cfg_old_value=a_cfg_value;
+ a_cfg_value &= (~(0x2800));
+ meiDebugWrite(A_CFG_ADDR,&a_cfg_value,1);
+ //clear buffer
+ a_cfg_value = 0x1;
+ meiDebugWrite(AR_CB0_STATUS_ADDR,&a_cfg_value,1);
+ meiDebugWrite(AR_CB1_STATUS_ADDR,&a_cfg_value,1);
+
+ if ( atm_init_hard(&g_atm_dev) != 0){
+ return -EIO;
+ }
+ sema_init(&(g_atm_dev.swie.in_sem), 1);
+ //SWIE lock
+ clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
+ //SWIE wait queue
+ init_waitqueue_head(&(g_atm_dev.swie.sleep));
+
+ for (i=CBM_DEFAULT_Q_OFFSET;i<AMAZON_ATM_MAX_QUEUE_NUM/2;i++) {
+ vcc = g_atm_dev.queues[i].vcc;
+ if (vcc != NULL){
+ set_qsb(vcc, &vcc->qos, i);
+ set_qd(vcc, i);
+ mb();
+ err=set_htu(vcc,i);
+ if (err){
+ AMAZON_TPE_EMSG("set htu entry fails %u\n",err);
+ }
+ }
+ }
+ meiDebugWrite(A_CFG_ADDR,&a_cfg_old_value,1);
+#if 0
+ //reset DFE
+ *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_DFE);
+ mb();
+ *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~AMAZON_RST_REQ_DFE);
+ mb();
+#endif
+
+ return 0;
+}
+
+/* Brief: Send a ATM EoP packet to save DMA channel
+ */
+int amazon_tpe_inject_debug_cell(void)
+{
+ //Send a ATM cell to save DMA channel
+ u8 qid;
+ unsigned char atm_cell[48];
+ qid = 0x11;
+ AMAZON_TPE_DMSG("qid = %d\n",qid);
+ memset(atm_cell,0,48);
+ atm_cell[3] = 0x2;
+ if ( amazon_atm_swin(qid,atm_cell)) {
+ AMAZON_TPE_EMSG("cannot insert EoP cell\n");
+ return -1;
+ }
+ return 0;
+}
+
+/* Brief: start HTU (TPE)
+ */
+
+int amazon_tpe_start(void)
+{
+ AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR);
+ wmb();
+ return 0;
+}
+#endif //AMAZON_TPE_AAL5_RECOVERY
+
+#ifdef AMAZON_CHECK_LINK
+extern int (*adsl_link_notify)(int);
+/* Brief: notify link status of ADSL link
+ * Parameters: 0 link down
+ * 1 link up
+ * Returns: 0 OK
+ * Details: called by MEI driver
+ * should update status and inform upper layer
+ */
+int amazon_tpe_link_notify(int status)
+{
+ adsl_link_status = status;
+ AMAZON_TPE_DMSG("link status %s\n",(status==1)?"Up":"Down");
+ if (status == 0){
+ //wait until no cells in upstream queues
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(2*HZ);
+ }
+ return 0;
+}
+#endif //ifdef AMAZON_CHECK_LINK
+
+/*
+ * Brief: Initialize ATM module
+ *
+ * Return Value: ENOMEM - No memory available
+ * EBUSY - Cannot register atm device
+ * ERESTARTSYS - Process interrupted by other signal
+ * 0 - OK, module initialized
+ *
+ * Description:
+ * This function registers an atm device for all UTOPIA devices.
+ * It also allocates memory for the private device data structures
+ */
+int __init amazon_atm_net_init(void)
+{
+ int i;
+ int err=0;
+ amazon_atm_dev_t *dev = NULL;
+
+ if ((dev=amazon_atm_create()) != NULL){
+ for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
+ if (!dev->ports[i].enable){
+ amazon_atm_devs[i] = NULL;
+ continue;
+ }
+ amazon_atm_devs[i] =atm_dev_register("amazon_atm",&amazon_atm_ops,-1,0UL);
+ if (amazon_atm_devs[i] == NULL){
+ AMAZON_TPE_EMSG("atm_dev_register fails\n");
+ err = -EIO;
+ goto amazon_atm_net_init_exit;
+ }else{
+ AMAZON_TPE_DMSG("registering device %u\n",i);
+ amazon_atm_devs[i]->ci_range.vpi_bits = 8;
+ amazon_atm_devs[i]->ci_range.vci_bits = 16;
+ amazon_atm_devs[i]->link_rate = dev->ports[i].tx_max_cr;
+ amazon_atm_devs[i]->dev_data = (void *) i;
+ }
+ }
+
+ }else{
+ err = -ENOMEM;
+ AMAZON_TPE_EMSG("cannot init atm device\n");
+ goto amazon_atm_net_init_exit;
+ }
+#ifdef AMAZON_TPE_AAL5_RECOVERY
+ tpe_reset = & amazon_tpe_reset;
+ tpe_start = & amazon_tpe_start;
+ tpe_inject = & amazon_tpe_inject_debug_cell;
+#endif //AMAZON_TPE_AAL5_RECOVERY
+#ifdef AMAZON_CHECK_LINK
+ adsl_link_notify=amazon_tpe_link_notify;
+#endif //AMAZON_CHECK_LINK
+amazon_atm_net_init_exit:
+ return err;
+}
+
+void __exit amazon_atm_net_cleanup(void)
+{
+ int i;
+ amazon_atm_cleanup();
+ for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
+ if (amazon_atm_devs[i] != NULL){
+ AMAZON_TPE_DMSG("unregister dev %u\n",i);
+ atm_dev_deregister(amazon_atm_devs[i]);
+ }
+ }
+ return;
+}
+EXPORT_SYMBOL(get_oam_time_stamp);
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Infineon IFAP DC COM peng.liu@infineon.com");
+MODULE_DESCRIPTION("AMAZON ATM driver");
+
+module_init(amazon_atm_net_init);
+module_exit(amazon_atm_net_cleanup);
+
+
+
+
+
diff --git a/target/linux/amazon/files/drivers/char/admmod.c b/target/linux/amazon/files/drivers/char/admmod.c
new file mode 100644
index 0000000..0229f53
--- /dev/null
+++ b/target/linux/amazon/files/drivers/char/admmod.c
@@ -0,0 +1,1486 @@
+/******************************************************************************
+ Copyright (c) 2004, Infineon Technologies. All rights reserved.
+
+ No Warranty
+ Because the program is licensed free of charge, there is no warranty for
+ the program, to the extent permitted by applicable law. Except when
+ otherwise stated in writing the copyright holders and/or other parties
+ provide the program "as is" without warranty of any kind, either
+ expressed or implied, including, but not limited to, the implied
+ warranties of merchantability and fitness for a particular purpose. The
+ entire risk as to the quality and performance of the program is with
+ you. should the program prove defective, you assume the cost of all
+ necessary servicing, repair or correction.
+
+ In no event unless required by applicable law or agreed to in writing
+ will any copyright holder, or any other party who may modify and/or
+ redistribute the program as permitted above, be liable to you for
+ damages, including any general, special, incidental or consequential
+ damages arising out of the use or inability to use the program
+ (including but not limited to loss of data or data being rendered
+ inaccurate or losses sustained by you or third parties or a failure of
+ the program to operate with any other programs), even if such holder or
+ other party has been advised of the possibility of such damages.
+ ******************************************************************************
+ Module : admmod.c
+ Date : 2004-09-01
+ Description : JoeLin
+ Remarks:
+
+ Revision:
+ MarsLin, add to support VLAN
+
+ *****************************************************************************/
+//000001.joelin 2005/06/02 add"ADM6996_MDC_MDIO_MODE" define,
+// if define ADM6996_MDC_MDIO_MODE==> ADM6996LC and ADM6996I will be in MDIO/MDC(SMI)(16 bit) mode,
+// amazon should contrl ADM6996 by MDC/MDIO pin
+// if undef ADM6996_MDC_MDIO_MODE==> ADM6996 will be in EEProm(32 bit) mode,
+// amazon should contrl ADM6996 by GPIO15,16,17,18 pin
+/* 507281:linmars 2005/07/28 support MDIO/EEPROM config mode */
+/* 509201:linmars remove driver testing codes */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <asm/atomic.h>
+#include <asm-mips/amazon/amazon.h>
+#include <asm-mips/amazon/adm6996.h>
+//#include <linux/amazon/adm6996.h>
+
+
+unsigned int ifx_sw_conf[ADM_SW_MAX_PORT_NUM+1] = \
+ {ADM_SW_PORT0_CONF, ADM_SW_PORT1_CONF, ADM_SW_PORT2_CONF, \
+ ADM_SW_PORT3_CONF, ADM_SW_PORT4_CONF, ADM_SW_PORT5_CONF};
+unsigned int ifx_sw_bits[8] = \
+ {0x1, 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff};
+unsigned int ifx_sw_vlan_port[6] = {0, 2, 4, 6, 7, 8};
+//050613:fchang
+/* 507281:linmars start */
+#ifdef CONFIG_SWITCH_ADM6996_MDIO
+#define ADM6996_MDC_MDIO_MODE 1 //000001.joelin
+#else
+#undef ADM6996_MDC_MDIO_MODE
+#endif
+/* 507281:linmars end */
+#define adm6996i 0
+#define adm6996lc 1
+#define adm6996l 2
+unsigned int adm6996_mode=adm6996i;
+/*
+ initialize GPIO pins.
+ output mode, low
+*/
+void ifx_gpio_init(void)
+{
+ //GPIO16,17,18 direction:output
+ //GPIO16,17,18 output 0
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_DIR) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT) =AMAZON_SW_REG(AMAZON_GPIO_P1_IN)& ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+
+}
+
+/* read one bit from mdio port */
+int ifx_sw_mdio_readbit(void)
+{
+ //int val;
+
+ //val = (AMAZON_SW_REG(GPIO_conf0_REG) & GPIO0_INPUT_MASK) >> 8;
+ //return val;
+ //GPIO16
+ return AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&1;
+}
+
+/*
+ MDIO mode selection
+ 1 -> output
+ 0 -> input
+
+ switch input/output mode of GPIO 0
+*/
+void ifx_mdio_mode(int mode)
+{
+// AMAZON_SW_REG(GPIO_conf0_REG) = mode ? GPIO_ENABLEBITS :
+// ((GPIO_ENABLEBITS | MDIO_INPUT) & ~MDIO_OUTPUT_EN);
+ mode?(AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)|=GPIO_MDIO):
+ (AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)&=~GPIO_MDIO);
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_DIR);
+ mode?(r|=GPIO_MDIO):(r&=~GPIO_MDIO);
+ AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)=r;*/
+}
+
+void ifx_mdc_hi(void)
+{
+ //GPIO_SET_HI(GPIO_MDC);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDC;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r|=GPIO_MDC;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDC;
+}
+
+void ifx_mdio_hi(void)
+{
+ //GPIO_SET_HI(GPIO_MDIO);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDIO;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r|=GPIO_MDIO;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDIO;
+}
+
+void ifx_mdcs_hi(void)
+{
+ //GPIO_SET_HI(GPIO_MDCS);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDCS;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r|=GPIO_MDCS;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDCS;
+}
+
+void ifx_mdc_lo(void)
+{
+ //GPIO_SET_LOW(GPIO_MDC);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDC;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r&=~GPIO_MDC;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDC);
+}
+
+void ifx_mdio_lo(void)
+{
+ //GPIO_SET_LOW(GPIO_MDIO);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDIO;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r&=~GPIO_MDIO;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDIO);
+}
+
+void ifx_mdcs_lo(void)
+{
+ //GPIO_SET_LOW(GPIO_MDCS);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDCS;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r&=~GPIO_MDCS;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDCS);
+}
+
+/*
+ mdc pulse
+ 0 -> 1 -> 0
+*/
+static void ifx_sw_mdc_pulse(void)
+{
+ ifx_mdc_lo();
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+ ifx_mdc_hi();
+ udelay(ADM_SW_MDC_UP_DELAY);
+ ifx_mdc_lo();
+}
+
+/*
+ mdc toggle
+ 1 -> 0
+*/
+static void ifx_sw_mdc_toggle(void)
+{
+ ifx_mdc_hi();
+ udelay(ADM_SW_MDC_UP_DELAY);
+ ifx_mdc_lo();
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+}
+
+/*
+ enable eeprom write
+ For ATC 93C66 type EEPROM; accessing ADM6996 internal EEPROM type registers
+*/
+static void ifx_sw_eeprom_write_enable(void)
+{
+ unsigned int op;
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_hi();
+ udelay(ADM_SW_CS_DELAY);
+ /* enable chip select */
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+ /* start bit */
+ ifx_mdio_hi();
+ ifx_sw_mdc_pulse();
+
+ /* eeprom write enable */
+ op = ADM_SW_BIT_MASK_4;
+ while (op)
+ {
+ if (op & ADM_SW_EEPROM_WRITE_ENABLE)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
+ while (op)
+ {
+ ifx_mdio_lo();
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+ /* disable chip select */
+ ifx_mdcs_lo();
+ udelay(ADM_SW_CS_DELAY);
+ ifx_sw_mdc_pulse();
+}
+
+/*
+ disable eeprom write
+*/
+static void ifx_sw_eeprom_write_disable(void)
+{
+ unsigned int op;
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_hi();
+ udelay(ADM_SW_CS_DELAY);
+ /* enable chip select */
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ /* start bit */
+ ifx_mdio_hi();
+ ifx_sw_mdc_pulse();
+ /* eeprom write disable */
+ op = ADM_SW_BIT_MASK_4;
+ while (op)
+ {
+ if (op & ADM_SW_EEPROM_WRITE_DISABLE)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
+ while (op)
+ {
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+ /* disable chip select */
+ ifx_mdcs_lo();
+ udelay(ADM_SW_CS_DELAY);
+ ifx_sw_mdc_pulse();
+}
+
+/*
+ read registers from ADM6996
+ serial registers start at 0x200 (addr bit 9 = 1b)
+ EEPROM registers -> 16bits; Serial registers -> 32bits
+*/
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode//000001.joelin
+static int ifx_sw_read_adm6996i_smi(unsigned int addr, unsigned int *dat)
+{
+ addr=(addr<<16)&0x3ff0000;
+ AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) =(0xC0000000|addr);
+ while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
+ *dat=((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x0FFFF);
+ return 0;
+}
+#endif
+
+static int ifx_sw_read_adm6996i(unsigned int addr, unsigned int *dat)
+{
+ unsigned int op;
+
+ ifx_gpio_init();
+
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+
+ udelay(ADM_SW_CS_DELAY);
+
+ /* preamble, 32 bit 1 */
+ ifx_mdio_hi();
+ op = ADM_SW_BIT_MASK_32;
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* command start (01b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_START)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* read command (10b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_READ)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* send address A9 ~ A0 */
+ op = ADM_SW_BIT_MASK_10;
+ while (op)
+ {
+ if (op & addr)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* turnaround bits */
+ op = ADM_SW_BIT_MASK_2;
+ ifx_mdio_hi();
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+
+ /* set MDIO pin to input mode */
+ ifx_mdio_mode(ADM_SW_MDIO_INPUT);
+
+ /* start read data */
+ *dat = 0;
+//adm6996i op = ADM_SW_BIT_MASK_32;
+ op = ADM_SW_BIT_MASK_16;//adm6996i
+ while (op)
+ {
+ *dat <<= 1;
+ if (ifx_sw_mdio_readbit()) *dat |= 1;
+ ifx_sw_mdc_toggle();
+
+ op >>= 1;
+ }
+
+ /* set MDIO to output mode */
+ ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
+
+ /* dummy clock */
+ op = ADM_SW_BIT_MASK_4;
+ ifx_mdio_lo();
+ while(op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+ ifx_mdcs_hi();
+
+ /* EEPROM registers */
+//adm6996i if (!(addr & 0x200))
+//adm6996i {
+//adm6996i if (addr % 2)
+//adm6996i *dat >>= 16;
+//adm6996i else
+//adm6996i *dat &= 0xffff;
+//adm6996i }
+
+ return 0;
+}
+//adm6996
+static int ifx_sw_read_adm6996l(unsigned int addr, unsigned int *dat)
+{
+ unsigned int op;
+
+ ifx_gpio_init();
+
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+
+ udelay(ADM_SW_CS_DELAY);
+
+ /* preamble, 32 bit 1 */
+ ifx_mdio_hi();
+ op = ADM_SW_BIT_MASK_32;
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* command start (01b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_START)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* read command (10b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_READ)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* send address A9 ~ A0 */
+ op = ADM_SW_BIT_MASK_10;
+ while (op)
+ {
+ if (op & addr)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* turnaround bits */
+ op = ADM_SW_BIT_MASK_2;
+ ifx_mdio_hi();
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+
+ /* set MDIO pin to input mode */
+ ifx_mdio_mode(ADM_SW_MDIO_INPUT);
+
+ /* start read data */
+ *dat = 0;
+ op = ADM_SW_BIT_MASK_32;
+ while (op)
+ {
+ *dat <<= 1;
+ if (ifx_sw_mdio_readbit()) *dat |= 1;
+ ifx_sw_mdc_toggle();
+
+ op >>= 1;
+ }
+
+ /* set MDIO to output mode */
+ ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
+
+ /* dummy clock */
+ op = ADM_SW_BIT_MASK_4;
+ ifx_mdio_lo();
+ while(op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+ ifx_mdcs_hi();
+
+ /* EEPROM registers */
+ if (!(addr & 0x200))
+ {
+ if (addr % 2)
+ *dat >>= 16;
+ else
+ *dat &= 0xffff;
+ }
+
+ return 0;
+}
+
+static int ifx_sw_read(unsigned int addr, unsigned int *dat)
+{
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
+ ifx_sw_read_adm6996i_smi(addr,dat);
+#else
+ if (adm6996_mode==adm6996i) ifx_sw_read_adm6996i(addr,dat);
+ else ifx_sw_read_adm6996l(addr,dat);
+#endif
+ return 0;
+
+}
+
+/*
+ write register to ADM6996 eeprom registers
+*/
+//for adm6996i -start
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
+static int ifx_sw_write_adm6996i_smi(unsigned int addr, unsigned int dat)
+{
+
+ AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) = ((addr<<16)&0x3ff0000)|dat|0x80000000;
+ while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
+
+ return 0;
+
+}
+#endif //ADM6996_MDC_MDIO_MODE //000001.joelin
+
+static int ifx_sw_write_adm6996i(unsigned int addr, unsigned int dat)
+{
+ unsigned int op;
+
+ ifx_gpio_init();
+
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+
+ udelay(ADM_SW_CS_DELAY);
+
+ /* preamble, 32 bit 1 */
+ ifx_mdio_hi();
+ op = ADM_SW_BIT_MASK_32;
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* command start (01b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_START)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* write command (01b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_WRITE)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* send address A9 ~ A0 */
+ op = ADM_SW_BIT_MASK_10;
+ while (op)
+ {
+ if (op & addr)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* turnaround bits */
+ op = ADM_SW_BIT_MASK_2;
+ ifx_mdio_hi();
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+
+ /* set MDIO pin to output mode */
+ ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
+
+
+ /* start write data */
+ op = ADM_SW_BIT_MASK_16;
+ while (op)
+ {
+ if (op & dat)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_toggle();
+ op >>= 1;
+ }
+
+ // /* set MDIO to output mode */
+ // ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
+
+ /* dummy clock */
+ op = ADM_SW_BIT_MASK_4;
+ ifx_mdio_lo();
+ while(op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+ ifx_mdcs_hi();
+
+ /* EEPROM registers */
+//adm6996i if (!(addr & 0x200))
+//adm6996i {
+//adm6996i if (addr % 2)
+//adm6996i *dat >>= 16;
+//adm6996i else
+//adm6996i *dat &= 0xffff;
+//adm6996i }
+
+ return 0;
+}
+//for adm6996i-end
+static int ifx_sw_write_adm6996l(unsigned int addr, unsigned int dat)
+{
+ unsigned int op;
+
+ ifx_gpio_init();
+
+ /* enable write */
+ ifx_sw_eeprom_write_enable();
+
+ /* chip select */
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ /* issue write command */
+ /* start bit */
+ ifx_mdio_hi();
+ ifx_sw_mdc_pulse();
+
+ /* EEPROM write command */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_EEPROM_WRITE)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* send address A7 ~ A0 */
+ op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 1);
+
+ while (op)
+ {
+ if (op & addr)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_toggle();
+ op >>= 1;
+ }
+
+ /* start write data */
+ op = ADM_SW_BIT_MASK_16;
+ while (op)
+ {
+ if (op & dat)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_toggle();
+ op >>= 1;
+ }
+
+ /* disable cs & wait 1 clock */
+ ifx_mdcs_lo();
+ udelay(ADM_SW_CS_DELAY);
+ ifx_sw_mdc_toggle();
+
+ ifx_sw_eeprom_write_disable();
+
+ return 0;
+}
+
+static int ifx_sw_write(unsigned int addr, unsigned int dat)
+{
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
+ ifx_sw_write_adm6996i_smi(addr,dat);
+#else //000001.joelin
+ if (adm6996_mode==adm6996i) ifx_sw_write_adm6996i(addr,dat);
+ else ifx_sw_write_adm6996l(addr,dat);
+#endif //000001.joelin
+ return 0;
+}
+
+/*
+ do switch PHY reset
+*/
+int ifx_sw_reset(void)
+{
+ /* reset PHY */
+ ifx_sw_write(ADM_SW_PHY_RESET, 0);
+
+ return 0;
+}
+
+/* 509201:linmars start */
+#if 0
+/*
+ check port status
+*/
+int ifx_check_port_status(int port)
+{
+ unsigned int val;
+
+ if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM))
+ {
+ ifx_printf(("error on port number (%d)!!\n", port));
+ return -1;
+ }
+
+ ifx_sw_read(ifx_sw_conf[port], &val);
+ if (ifx_sw_conf[port]%2) val >>= 16;
+ /* only 16bits are effective */
+ val &= 0xFFFF;
+
+ ifx_printf(("Port %d status (%.8x): \n", port, val));
+
+ if (val & ADM_SW_PORT_FLOWCTL)
+ ifx_printf(("\t802.3x flow control supported!\n"));
+ else
+ ifx_printf(("\t802.3x flow control not supported!\n"));
+
+ if (val & ADM_SW_PORT_AN)
+ ifx_printf(("\tAuto negotiation ON!\n"));
+ else
+ ifx_printf(("\tAuto negotiation OFF!\n"));
+
+ if (val & ADM_SW_PORT_100M)
+ ifx_printf(("\tLink at 100M!\n"));
+ else
+ ifx_printf(("\tLink at 10M!\n"));
+
+ if (val & ADM_SW_PORT_FULL)
+ ifx_printf(("\tFull duplex!\n"));
+ else
+ ifx_printf(("\tHalf duplex!\n"));
+
+ if (val & ADM_SW_PORT_DISABLE)
+ ifx_printf(("\tPort disabled!\n"));
+ else
+ ifx_printf(("\tPort enabled!\n"));
+
+ if (val & ADM_SW_PORT_TOS)
+ ifx_printf(("\tTOS enabled!\n"));
+ else
+ ifx_printf(("\tTOS disabled!\n"));
+
+ if (val & ADM_SW_PORT_PPRI)
+ ifx_printf(("\tPort priority first!\n"));
+ else
+ ifx_printf(("\tVLAN or TOS priority first!\n"));
+
+ if (val & ADM_SW_PORT_MDIX)
+ ifx_printf(("\tAuto MDIX!\n"));
+ else
+ ifx_printf(("\tNo auto MDIX\n"));
+
+ ifx_printf(("\tPVID: %d\n", \
+ ((val >> ADM_SW_PORT_PVID_SHIFT)&ifx_sw_bits[ADM_SW_PORT_PVID_BITS])));
+
+ return 0;
+}
+/*
+ initialize a VLAN
+ clear all VLAN bits
+*/
+int ifx_sw_vlan_init(int vlanid)
+{
+ ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, 0);
+
+ return 0;
+}
+
+/*
+ add a port to certain vlan
+*/
+int ifx_sw_vlan_add(int port, int vlanid)
+{
+ int reg = 0;
+
+ if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) ||
+ (vlanid > ADM_SW_MAX_VLAN_NUM))
+ {
+ ifx_printf(("Port number or VLAN number ERROR!!\n"));
+ return -1;
+ }
+ ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, &reg);
+ reg |= (1 << ifx_sw_vlan_port[port]);
+ ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
+
+ return 0;
+}
+
+/*
+ delete a given port from certain vlan
+*/
+int ifx_sw_vlan_del(int port, int vlanid)
+{
+ unsigned int reg = 0;
+
+ if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || (vlanid > ADM_SW_MAX_VLAN_NUM))
+ {
+ ifx_printf(("Port number or VLAN number ERROR!!\n"));
+ return -1;
+ }
+ ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, &reg);
+ reg &= ~(1 << ifx_sw_vlan_port[port]);
+ ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
+
+ return 0;
+}
+
+/*
+ default VLAN setting
+
+ port 0~3 as untag port and PVID = 1
+ VLAN1: port 0~3 and port 5 (MII)
+*/
+static int ifx_sw_init(void)
+{
+ ifx_printf(("Setting default ADM6996 registers... \n"));
+
+ /* MAC clone, 802.1q based VLAN */
+ ifx_sw_write(ADM_SW_VLAN_MODE, 0xff30);
+ /* auto MDIX, PVID=1, untag */
+ ifx_sw_write(ADM_SW_PORT0_CONF, 0x840f);
+ ifx_sw_write(ADM_SW_PORT1_CONF, 0x840f);
+ ifx_sw_write(ADM_SW_PORT2_CONF, 0x840f);
+ ifx_sw_write(ADM_SW_PORT3_CONF, 0x840f);
+ /* auto MDIX, PVID=2, untag */
+ ifx_sw_write(ADM_SW_PORT5_CONF, 0x880f);
+ /* port 0~3 & 5 as VLAN1 */
+ ifx_sw_write(ADM_SW_VLAN0_CONF+1, 0x0155);
+
+ return 0;
+}
+#endif
+/* 509201:linmars end */
+
+int adm_open(struct inode *node, struct file *filp)
+{
+ MOD_INC_USE_COUNT;
+ return 0;
+}
+
+ssize_t adm_read(struct file *filep, char *buf, size_t count, loff_t *ppos)
+{
+ return count;
+}
+
+ssize_t adm_write(struct file *filep, const char *buf, size_t count, loff_t *ppos)
+{
+ return count;
+}
+
+/* close */
+int adm_release(struct inode *inode, struct file *filp)
+{
+ MOD_DEC_USE_COUNT;
+ return 0;
+}
+
+/* IOCTL function */
+int adm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long args)
+{
+ PREGRW uREGRW;
+ unsigned int rtval;
+ unsigned int val; //6996i
+ unsigned int control[6] ; //6996i
+ unsigned int status[6] ; //6996i
+
+ PMACENTRY mMACENTRY;//adm6996i
+ PPROTOCOLFILTER uPROTOCOLFILTER ;///adm6996i
+
+ if (_IOC_TYPE(cmd) != ADM_MAGIC)
+ {
+ printk("adm_ioctl: IOC_TYPE(%x) != ADM_MAGIC(%x)! \n", _IOC_TYPE(cmd), ADM_MAGIC);
+ return (-EINVAL);
+ }
+
+ if(_IOC_NR(cmd) >= KEY_IOCTL_MAX_KEY)
+ {
+ printk(KERN_WARNING "adm_ioctl: IOC_NR(%x) invalid! \n", _IOC_NR(cmd));
+ return (-EINVAL);
+ }
+
+ switch (cmd)
+ {
+ case ADM_IOCTL_REGRW:
+ {
+ uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
+ rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
+ if (rtval != 0)
+ {
+ printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
+ return (-EFAULT);
+ }
+
+ switch(uREGRW->mode)
+ {
+ case REG_READ:
+ uREGRW->value = 0x12345678;//inl(uREGRW->addr);
+ copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
+ break;
+ case REG_WRITE:
+ //outl(uREGRW->value, uREGRW->addr);
+ break;
+
+ default:
+ printk("No such Register Read/Write function!! \n");
+ return (-EFAULT);
+ }
+ kfree(uREGRW);
+ break;
+ }
+
+ case ADM_SW_IOCTL_REGRW:
+ {
+ unsigned int val = 0xff;
+
+ uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
+ rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
+ if (rtval != 0)
+ {
+ printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
+ return (-EFAULT);
+ }
+
+ switch(uREGRW->mode)
+ {
+ case REG_READ:
+ ifx_sw_read(uREGRW->addr, &val);
+ uREGRW->value = val;
+ copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
+ break;
+
+ case REG_WRITE:
+ ifx_sw_write(uREGRW->addr, uREGRW->value);
+ break;
+ default:
+ printk("No such Register Read/Write function!! \n");
+ return (-EFAULT);
+ }
+ kfree(uREGRW);
+ break;
+ }
+/* 509201:linmars start */
+#if 0
+ case ADM_SW_IOCTL_PORTSTS:
+ for (rtval = 0; rtval < ADM_SW_MAX_PORT_NUM+1; rtval++)
+ ifx_check_port_status(rtval);
+ break;
+ case ADM_SW_IOCTL_INIT:
+ ifx_sw_init();
+ break;
+#endif
+/* 509201:linmars end */
+//adm6996i
+ case ADM_SW_IOCTL_MACENTRY_ADD:
+ case ADM_SW_IOCTL_MACENTRY_DEL:
+ case ADM_SW_IOCTL_MACENTRY_GET_INIT:
+ case ADM_SW_IOCTL_MACENTRY_GET_MORE:
+
+
+ mMACENTRY = (PMACENTRY)kmalloc(sizeof(MACENTRY), GFP_KERNEL);
+ rtval = copy_from_user(mMACENTRY, (PMACENTRY)args, sizeof(MACENTRY));
+ if (rtval != 0)
+ {
+ printk("ADM_SW_IOCTL_MACENTRY: copy from user FAILED!! \n");
+ return (-EFAULT);
+ }
+ control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ;
+ control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ;
+ control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ;
+ control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
+ if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
+ else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
+ if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {
+ //initial the pointer to the first address
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ control[5]=0x030;//initial the first address
+ ifx_sw_write(0x11f,control[5]);
+
+
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+
+ } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)
+ if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
+ else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
+ else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
+ control[5]=0x02c;//search by the mac address field
+
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ ifx_sw_write(0x11a,control[0]);
+ ifx_sw_write(0x11b,control[1]);
+ ifx_sw_write(0x11c,control[2]);
+ ifx_sw_write(0x11d,control[3]);
+ ifx_sw_write(0x11e,control[4]);
+ ifx_sw_write(0x11f,control[5]);
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ val=((val&0x7000)>>12);//result ,status5[14:12]
+ mMACENTRY->result=val;
+
+ if (!val) {
+ printk(" Command OK!! \n");
+ if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
+ ifx_sw_read(0x120,&(status[0]));
+ ifx_sw_read(0x121,&(status[1]));
+ ifx_sw_read(0x122,&(status[2]));
+ ifx_sw_read(0x123,&(status[3]));
+ ifx_sw_read(0x124,&(status[4]));
+ ifx_sw_read(0x125,&(status[5]));
+
+
+ mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ;
+ mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ;
+ mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ;
+ mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
+ mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ;
+ mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
+ mMACENTRY->fid=(status[3]&0xf);
+ mMACENTRY->portmap=((status[3]>>4)&0x3f);
+ if (status[5]&0x2) {//static info_ctrl //status5[1]????
+ mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
+ mMACENTRY->info_type=1;
+ }
+ else {//not static age_timer
+ mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
+ mMACENTRY->info_type=0;
+ }
+//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
+ mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
+ mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
+ }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
+
+ }
+ else if (val==0x001)
+ printk(" All Entry Used!! \n");
+ else if (val==0x002)
+ printk(" Entry Not Found!! \n");
+ else if (val==0x003)
+ printk(" Try Next Entry!! \n");
+ else if (val==0x005)
+ printk(" Command Error!! \n");
+ else
+ printk(" UnKnown Error!! \n");
+
+ copy_to_user((PMACENTRY)args, mMACENTRY,sizeof(MACENTRY));
+
+ break;
+
+ case ADM_SW_IOCTL_FILTER_ADD:
+ case ADM_SW_IOCTL_FILTER_DEL:
+ case ADM_SW_IOCTL_FILTER_GET:
+
+ uPROTOCOLFILTER = (PPROTOCOLFILTER)kmalloc(sizeof(PROTOCOLFILTER), GFP_KERNEL);
+ rtval = copy_from_user(uPROTOCOLFILTER, (PPROTOCOLFILTER)args, sizeof(PROTOCOLFILTER));
+ if (rtval != 0)
+ {
+ printk("ADM_SW_IOCTL_FILTER_ADD: copy from user FAILED!! \n");
+ return (-EFAULT);
+ }
+
+ if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter
+ uPROTOCOLFILTER->ip_p=00; //delet filter
+ uPROTOCOLFILTER->action=00; //delete filter
+ } //delete filter
+
+ ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7
+
+ if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
+ else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
+ }
+ else {
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
+ else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
+ }
+ if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7
+
+ ifx_sw_read(0x95, &val); //protocol filter action
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) {
+ uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
+ copy_to_user((PPROTOCOLFILTER)args, uPROTOCOLFILTER, sizeof(PROTOCOLFILTER));
+
+ }
+ else {
+ val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
+ // printk("%d----\n",val);
+ ifx_sw_write(0x95, val); //write protocol filter action
+ }
+
+ break;
+//adm6996i
+
+ /* others */
+ default:
+ return -EFAULT;
+ }
+ /* end of switch */
+ return 0;
+}
+
+/* Santosh: handle IGMP protocol filter ADD/DEL/GET */
+int adm_process_protocol_filter_request (unsigned int cmd, PPROTOCOLFILTER uPROTOCOLFILTER)
+{
+ unsigned int val; //6996i
+
+ if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter
+ uPROTOCOLFILTER->ip_p=00; //delet filter
+ uPROTOCOLFILTER->action=00; //delete filter
+ } //delete filter
+
+ ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7
+
+ if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
+ else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
+ }
+ else {
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
+ else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
+ }
+ if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7
+
+ ifx_sw_read(0x95, &val); //protocol filter action
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) {
+ uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
+ }
+ else {
+ val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
+ ifx_sw_write(0x95, val); //write protocol filter action
+ }
+
+ return 0;
+}
+
+
+/* Santosh: function for MAC ENTRY ADD/DEL/GET */
+
+int adm_process_mac_table_request (unsigned int cmd, PMACENTRY mMACENTRY)
+{
+ unsigned int rtval;
+ unsigned int val; //6996i
+ unsigned int control[6] ; //6996i
+ unsigned int status[6] ; //6996i
+
+ // printk ("adm_process_mac_table_request: enter\n");
+
+ control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ;
+ control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ;
+ control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ;
+ control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
+
+ if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
+ else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
+ if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {
+ //initial the pointer to the first address
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ control[5]=0x030;//initial the first address
+ ifx_sw_write(0x11f,control[5]);
+
+
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+
+ } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)
+ if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
+ else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
+ else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
+ control[5]=0x02c;//search by the mac address field
+
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ ifx_sw_write(0x11a,control[0]);
+ ifx_sw_write(0x11b,control[1]);
+ ifx_sw_write(0x11c,control[2]);
+ ifx_sw_write(0x11d,control[3]);
+ ifx_sw_write(0x11e,control[4]);
+ ifx_sw_write(0x11f,control[5]);
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ val=((val&0x7000)>>12);//result ,status5[14:12]
+ mMACENTRY->result=val;
+
+ if (!val) {
+ printk(" Command OK!! \n");
+ if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
+ ifx_sw_read(0x120,&(status[0]));
+ ifx_sw_read(0x121,&(status[1]));
+ ifx_sw_read(0x122,&(status[2]));
+ ifx_sw_read(0x123,&(status[3]));
+ ifx_sw_read(0x124,&(status[4]));
+ ifx_sw_read(0x125,&(status[5]));
+
+
+ mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ;
+ mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ;
+ mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ;
+ mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
+ mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ;
+ mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
+ mMACENTRY->fid=(status[3]&0xf);
+ mMACENTRY->portmap=((status[3]>>4)&0x3f);
+ if (status[5]&0x2) {//static info_ctrl //status5[1]????
+ mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
+ mMACENTRY->info_type=1;
+ }
+ else {//not static age_timer
+ mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
+ mMACENTRY->info_type=0;
+ }
+//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
+ mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
+ mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
+ }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
+
+ }
+ else if (val==0x001)
+ printk(" All Entry Used!! \n");
+ else if (val==0x002)
+ printk(" Entry Not Found!! \n");
+ else if (val==0x003)
+ printk(" Try Next Entry!! \n");
+ else if (val==0x005)
+ printk(" Command Error!! \n");
+ else
+ printk(" UnKnown Error!! \n");
+
+ // printk ("adm_process_mac_table_request: Exit\n");
+ return 0;
+}
+
+/* Santosh: End of function for MAC ENTRY ADD/DEL*/
+struct file_operations adm_ops =
+{
+ read: adm_read,
+ write: adm_write,
+ open: adm_open,
+ release: adm_release,
+ ioctl: adm_ioctl
+};
+
+int adm_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
+{
+ int len = 0;
+
+ len += sprintf(buf+len, " ************ Registers ************ \n");
+ *eof = 1;
+ return len;
+}
+
+int __init init_adm6996_module(void)
+{
+ unsigned int val = 000;
+ unsigned int val1 = 000;
+
+ printk("Loading ADM6996 driver... \n");
+
+ /* if running on adm5120 */
+ /* set GPIO 0~2 as adm6996 control pins */
+ //outl(0x003f3f00, 0x12000028);
+ /* enable switch port 5 (MII) as RMII mode (5120MAC <-> 6996MAC) */
+ //outl(0x18a, 0x12000030);
+ /* group adm5120 port 1 ~ 5 as VLAN0, port 5 & 6(CPU) as VLAN1 */
+ //outl(0x417e, 0x12000040);
+ /* end adm5120 fixup */
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
+ register_chrdev(69, "adm6996", &adm_ops);
+ AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x27be;
+ AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xfc;
+ adm6996_mode=adm6996i;
+ ifx_sw_read(0xa0, &val);
+ ifx_sw_read(0xa1, &val1);
+ val=((val1&0x0f)<<16)|val;
+ printk ("\nADM6996 SMI Mode-");
+ printk ("Chip ID:%5x \n ", val);
+#else //000001.joelin
+
+ AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x2c50;
+ AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xff;
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL0) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+ AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL1) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OD) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+
+ ifx_gpio_init();
+ register_chrdev(69, "adm6996", &adm_ops);
+ mdelay(100);
+
+ /* create proc entries */
+ // create_proc_read_entry("admide", 0, NULL, admide_proc, NULL);
+
+//joelin adm6996i support start
+ adm6996_mode=adm6996i;
+ ifx_sw_read(0xa0, &val);
+ adm6996_mode=adm6996l;
+ ifx_sw_read(0x200, &val1);
+// printk ("\n %0x \n",val1);
+ if ((val&0xfff0)==0x1020) {
+ printk ("\n ADM6996I .. \n");
+ adm6996_mode=adm6996i;
+ }
+ else if ((val1&0xffffff00)==0x71000) {//71010 or 71020
+ printk ("\n ADM6996LC .. \n");
+ adm6996_mode=adm6996lc;
+ }
+ else {
+ printk ("\n ADM6996L .. \n");
+ adm6996_mode=adm6996l;
+ }
+#endif //ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
+
+ if ((adm6996_mode==adm6996lc)||(adm6996_mode==adm6996i)){
+#if 0 /* removed by MarsLin */
+ ifx_sw_write(0x29,0xc000);
+ ifx_sw_write(0x30,0x0985);
+#else
+ ifx_sw_read(0xa0, &val);
+ if (val == 0x1021) // for both 6996LC and 6996I, only AB version need the patch
+ ifx_sw_write(0x29, 0x9000);
+ ifx_sw_write(0x30,0x0985);
+#endif
+ }
+//joelin adm6996i support end
+ return 0;
+}
+
+void __exit cleanup_adm6996_module(void)
+{
+ printk("Free ADM device driver... \n");
+
+ unregister_chrdev(69, "adm6996");
+
+ /* remove proc entries */
+ // remove_proc_entry("admide", NULL);
+}
+
+/* MarsLin, add start */
+#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
+ #define SET_BIT(reg, mask) reg |= (mask)
+ #define CLEAR_BIT(reg, mask) reg &= (~mask)
+ static int ifx_hw_reset(void)
+ {
+ CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL0),0x2000);
+ CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL1),0x2000);
+ SET_BIT((*AMAZON_GPIO_P0_OD),0x2000);
+ SET_BIT((*AMAZON_GPIO_P0_DIR), 0x2000);
+ CLEAR_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
+ mdelay(500);
+ SET_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
+ cleanup_adm6996_module();
+ return init_adm6996_module();
+ }
+ int (*adm6996_hw_reset)(void) = ifx_hw_reset;
+ EXPORT_SYMBOL(adm6996_hw_reset);
+ EXPORT_SYMBOL(adm6996_mode);
+ int (*adm6996_sw_read)(unsigned int addr, unsigned int *data) = ifx_sw_read;
+ EXPORT_SYMBOL(adm6996_sw_read);
+ int (*adm6996_sw_write)(unsigned int addr, unsigned int data) = ifx_sw_write;
+ EXPORT_SYMBOL(adm6996_sw_write);
+#endif
+/* MarsLin, add end */
+
+/* Santosh: for IGMP proxy/snooping, Begin */
+EXPORT_SYMBOL (adm_process_mac_table_request);
+EXPORT_SYMBOL (adm_process_protocol_filter_request);
+/* Santosh: for IGMP proxy/snooping, End */
+
+MODULE_DESCRIPTION("ADMtek 6996 Driver");
+MODULE_AUTHOR("Joe Lin <joe.lin@infineon.com>");
+MODULE_LICENSE("GPL");
+
+module_init(init_adm6996_module);
+module_exit(cleanup_adm6996_module);
+
diff --git a/target/linux/amazon/files/drivers/char/amazon_mei.c b/target/linux/amazon/files/drivers/char/amazon_mei.c
new file mode 100644
index 0000000..7efe52e
--- /dev/null
+++ b/target/linux/amazon/files/drivers/char/amazon_mei.c
@@ -0,0 +1,7918 @@
+/* ============================================================================
+ * Copyright (C) 2004 -Infineon Technologies AG.
+ *
+ * All rights reserved.
+ * ============================================================================
+ *
+ *============================================================================
+ * Licensed under GNU GPL v2
+ * ============================================================================
+ */
+
+
+/* ===========================================================================
+ *
+ * File Name: amazon_mei.c
+ * Author : Ou Ke
+ *
+ * ===========================================================================
+ *
+ * Project: Amazon
+ *
+ * ===========================================================================
+ * Contents:This file implements the MEI driver for Amazon ADSL/ADSL2+
+ * controller.
+ *
+ * ===========================================================================
+ * References:
+ *
+ */
+
+
+/* ===========================================================================
+ * Revision History:
+ * 12/1/2005 : Ritesh Banerjee
+ * - Create a kernel thread kmibpoll to poll for periodic RFC 2662
+ * and RFC 3440 counters. Removes the need for user space
+ * adsl_mibpoll_daemon and saves atleast 30KB of RAM.
+ *
+ * $Log$
+ * ===========================================================================
+ */
+
+/*
+ * ===========================================================================
+ * INCLUDE FILES
+ * ===========================================================================
+ */
+//000002:fchang 2005/6/2 joelin 04/27/2005 for pcm clock
+//000003:fchang 2005/6/2 Henry added for Amazon-E support
+//165001:henryhsu 2005/9/6 Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash.
+// 509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC
+// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics
+
+#ifndef EXPORT_SYMTAB
+#define EXPORT_SYMTAB
+#endif
+#define AMAZON_MEI_MIB_RFC3440
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <asm/irq.h>
+#include <asm/segment.h>
+#include <asm/semaphore.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+#include <linux/proc_fs.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <linux/list.h>
+#include <linux/time.h>
+
+#include <asm/amazon/amazon.h>
+#include <asm/irq.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/amazon_mei.h>
+#include <asm/amazon/amazon_mei_app.h>
+#include <asm/amazon/amazon_mei_ioctl.h>
+#include <asm/amazon/amazon_mei_app_ioctl.h>
+
+#define SET_BIT(reg, mask) reg |= (mask)
+#define CLEAR_BIT(reg, mask) reg &= (~mask)
+#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask) SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
+
+extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
+
+#ifdef AMAZON_CHECK_LINK
+//amazon_tpe.c
+extern int (*adsl_link_notify)(int);
+#endif //AMAZON_CHECK_LINK
+
+// for ARC memory access
+#define WHILE_DELAY 20000
+#define AMAZON_DMA_DEBUG_MUTEX
+
+
+//TODO
+#undef DFE_LOOPBACK
+#define ARC_READY_ACK
+
+static amazon_mei_mib * current_intvl;
+static struct list_head interval_list;
+static amazon_mei_mib * mei_mib;
+
+static int reboot_firsttime=1;//000002:fchang
+
+ //PCM
+#define PCM_CHANNEL_NUM 2 //1 rx, 1 tx
+static pcm_data_struct pcm_data[PCM_CHANNEL_NUM]__attribute__ ((aligned(4))); //0=tx0, 1=rx0, 2=tx1, 3=rx1
+static u32 pcm_start_addr;
+//#define PCM_HRT_TIME_HZ 4000 //?us
+#define PCM_ACCESS_DEBUG
+static int irqtimes=0;
+#undef DATA_LED_ON_MODE
+#define ADSL_LED_SUPPORT //joelin for adsl led
+#ifdef ADSL_LED_SUPPORT
+static int firmware_support_led=0; //joelin version check for adsl led
+static int stop_led_module=0; //wakeup and clean led module
+static int led_support_check=0; //1.1.2.7.1.1
+#endif //ADSL_LED_SUPPORT
+#define IFX_DYING_GASP
+#ifdef IFX_DYING_GASP
+static wait_queue_head_t wait_queue_dying_gasp; //dying gasp
+//struct tq_struct dying_gasp_task; //dying gasp
+static wait_queue_head_t wait_queue_uas_poll; //joelin 04/16/2005
+static u16 unavailable_seconds=0; //joelin 04/16/2005
+static meidebug lop_debugwr; //dying gasp
+#endif //IFX_DYING_GASP
+static int dbg_int=0;
+//#define DEBUG_ACCESS_DELAY for(dbg_int=0;dbg_int<100;dbg_int++){;}
+#define DEBUG_ACCESS_DELAY
+static u8 sampledata[512];
+static int firsttime[PCM_CHANNEL_NUM]={0,1};
+static int num_cmp[PCM_CHANNEL_NUM]={0,0};
+static int pcm_start_loc[PCM_CHANNEL_NUM]={0,0};
+
+ // for clearEoC
+//#define MEI_CLREOC_BUFF_SIZE 512 //double the receive fifo size, bytes
+//static u8 clreoc[MEI_CLREOC_BUFF_SIZE]__attribute__ ((aligned(4))); //buffer to hold clearEoC data in bytes
+#undef AMAZON_CLEAR_EOC
+#ifdef AMAZON_CLEAR_EOC
+extern void ifx_push_eoc(struct sk_buff * pkt);
+#endif
+static int meiResetArc(void);
+#define IFX_POP_EOC_DONE 0
+#define IFX_POP_EOC_FAIL -1
+static struct list_head clreoc_list;
+static amazon_clreoc_pkt * clreoc_pkt;
+#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered
+//static int clreoc_wr=0;
+//static int clreoc_rd=0; //used to control clreoc circular buffer
+static wait_queue_head_t wait_queue_clreoc;
+#ifdef ADSL_LED_SUPPORT
+static wait_queue_head_t wait_queue_led; //adsl led
+static wait_queue_head_t wait_queue_led_polling;// adsl led
+struct tq_struct led_task; // adsl led
+static DECLARE_TASK_QUEUE(tq_ifx_led); // task
+int adsl_led_flash_task(void *ptr); // adsl led
+#endif //ADSL_LED_SUPPORT
+static void * clreoc_command_pkt=NULL;
+static int clreoc_max_tx_len=0;
+
+// 603221:tc.chen start
+#define ME_HDLC_IDLE 0
+#define ME_HDLC_INVALID_MSG 1
+#define ME_HDLC_MSG_QUEUED 2
+#define ME_HDLC_MSG_SENT 3
+#define ME_HDLC_RESP_RCVD 4
+#define ME_HDLC_RESP_TIMEOUT 5
+#define ME_HDLC_RX_BUF_OVERFLOW 6
+#define ME_HDLC_UNRESOLVED 1
+#define ME_HDLC_RESOLVED 2
+// 603221:tc.chen end
+
+#ifdef LOCK_RETRY
+static int reboot_lock=0;
+#endif
+
+static mib_previous_read mib_pread={0,0,0,0,0,0,0,0,0,0,0,0};
+static mib_flags_pretime mib_pflagtime;// initialized when module loaded
+
+ static u32 ATUC_PERF_LOFS=0;
+ static u32 ATUC_PERF_LOSS=0;
+ static u32 ATUC_PERF_ESS=0;
+ static u32 ATUC_PERF_INITS=0;
+ static u32 ATUR_PERF_LOFS=0;
+ static u32 ATUR_PERF_LOSS=0;
+ static u32 ATUR_PERF_LPR=0;
+ static u32 ATUR_PERF_ESS=0;
+ static u32 ATUR_CHAN_RECV_BLK=0;
+ static u32 ATUR_CHAN_TX_BLK=0;
+ static u32 ATUR_CHAN_CORR_BLK=0;
+ static u32 ATUR_CHAN_UNCORR_BLK=0;
+ //RFC-3440
+ static u32 ATUC_PERF_STAT_FASTR=0;
+ static u32 ATUC_PERF_STAT_FAILED_FASTR=0;
+ static u32 ATUC_PERF_STAT_SESL=0;
+ static u32 ATUC_PERF_STAT_UASL=0;
+ static u32 ATUR_PERF_STAT_SESL=0;
+ static u32 ATUR_PERF_STAT_UASL=0;
+
+ static adslChanPrevTxRate PrevTxRate={0,0};
+ static adslPhysCurrStatus CurrStatus={0,0};
+ static ChanType chantype={0,0};
+ static adslLineAlarmConfProfileEntry AlarmConfProfile={"No Name\0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1};
+// 603221:tc.chen start
+ static adslFarEndPerfStats FarendStatsData;
+ struct timeval FarendData_acquire_time={0};
+ static u32 adsl_mode,adsl_mode_extend; // adsl mode : adsl/ 2/ 2+
+ static adslInitStats AdslInitStatsData;
+//603221:tc.chen end
+static u32 loop_diagnostics_mode=0;
+static wait_queue_head_t wait_queue_loop_diagnostic;
+#ifdef AMAZON_MEI_MIB_RFC3440
+ static adslLineAlarmConfProfileExtEntry AlarmConfProfileExt={"No Name\0",0,0,0,0,0,0};
+#endif
+
+static int showtime=0;
+static int loop_diagnostics_completed=0;
+//////////////////////////////////////////////////////////////////////////////////
+static int phy_mei_net_init(struct net_device * dev);
+static int interleave_mei_net_init(struct net_device * dev);
+static int fast_mei_net_init(struct net_device * dev);
+static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev);
+static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev);
+static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev);
+
+typedef struct mei_priv{
+ struct net_device_stats stats;
+}mei_priv;
+
+static struct net_device phy_mei_net = { init: phy_mei_net_init, name: "MEI_PHY"};
+static struct net_device interleave_mei_net = { init: interleave_mei_net_init, name: "MEI_INTL"};
+static struct net_device fast_mei_net = { init: fast_mei_net_init, name: "MEI_FAST"};
+///////////////////////////////////////////////////////////////////////////////////
+
+static int major=AMAZON_MEI_MAJOR;
+
+static struct semaphore mei_sema;
+
+// Mei to ARC CMV count, reply count, ARC Indicator count
+static int indicator_count=0;
+static int cmv_count=0;
+static int reply_count=0;
+static u16 Recent_indicator[MSG_LENGTH];
+
+// Used in interrupt handler as flags
+static int arcmsgav=0;
+static int cmv_reply=0;
+static int cmv_waiting=0;
+
+#define PROC_ITEMS 8
+
+long mei_debug_mode = 0; //509221:tc.chen for adsl firmware debug
+
+// to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
+static wait_queue_head_t wait_queue_arcmsgav;
+static wait_queue_head_t wait_queue_codeswap;
+static wait_queue_head_t wait_queue_mibdaemon;
+static wait_queue_head_t wait_queue_reboot;
+static u32 * image_buffer=NULL; // holding adsl firmware image
+static u16 RxMessage[MSG_LENGTH]__attribute__ ((aligned(4)));
+static u16 TxMessage[MSG_LENGTH]__attribute__ ((aligned(4)));
+static u32 * mei_arc_swap_buff=NULL; // holding swap pages
+static ARC_IMG_HDR * img_hdr;
+static int reboot_flag;
+
+#ifdef DFE_LOOPBACK
+#include "arc_pm.h"
+#endif
+
+
+///////////////// net device ///////////////////////////////////////////////////
+static int phy_mei_net_init(struct net_device * dev)
+{
+ //ether_setup(dev);
+ dev->get_stats = phy_mei_net_get_stats;
+ dev->ip_ptr = NULL;
+ dev->type = 94;
+
+// dev->mtu=12345;
+ dev->flags=IFF_UP;
+
+ dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
+ if(dev->priv == NULL)
+ return -ENOMEM;
+ memset(dev->priv, 0, sizeof(struct mei_priv));
+ return 0;
+}
+
+static int interleave_mei_net_init(struct net_device * dev)
+{
+ //ether_setup(dev);
+ dev->get_stats = interleave_mei_net_get_stats;
+ dev->ip_ptr = NULL;
+ dev->type = 124;
+ dev->flags=IFF_UP;
+ dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
+ if(dev->priv == NULL)
+ return -ENOMEM;
+ memset(dev->priv, 0, sizeof(struct mei_priv));
+ return 0;
+}
+
+static int fast_mei_net_init(struct net_device * dev)
+{
+ //ether_setup(dev);
+ dev->get_stats = fast_mei_net_get_stats;
+ dev->ip_ptr = NULL;
+ dev->type = 125;
+ dev->flags=IFF_UP;
+ dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
+ if(dev->priv == NULL)
+ return -ENOMEM;
+ memset(dev->priv, 0, sizeof(struct mei_priv));
+ return 0;
+}
+
+static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev)
+{
+ struct mei_priv * priv;
+ priv = (struct mei_priv *)dev->priv;
+ // update statistics
+ (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
+ (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
+ (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
+ (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
+
+ return &(priv->stats);
+}
+
+static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev)
+{
+ struct mei_priv * priv;
+ priv = (struct mei_priv *)dev->priv;
+ // update statistics
+ (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
+ (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
+ (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
+ (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
+
+ return &(priv->stats);
+}
+
+static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev)
+{
+ struct mei_priv * priv;
+ priv = (struct mei_priv *)dev->priv;
+ // update statistics
+ (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
+ (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
+ (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
+ (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
+
+ return &(priv->stats);
+}
+///////////////// mei access Rd/Wr methods ///////////////////////////////////////////////////
+void meiLongwordWrite(u32 ul_address, u32 ul_data)
+{
+ *((volatile u32 *)ul_address) = ul_data;
+ asm("SYNC");
+ return;
+} // end of "meiLongwordWrite(..."
+
+void meiLongwordRead(u32 ul_address, u32 *pul_data)
+{
+ *pul_data = *((volatile u32 *)ul_address);
+ asm("SYNC");
+ return;
+} // end of "meiLongwordRead(..."
+
+MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 *p = databuff;
+ u32 temp;
+ u32 flags;
+
+ if( destaddr & 3)
+ return MEI_FAILURE;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Set the write transfer address
+ meiLongwordWrite(MEI_XFR_ADDR, destaddr);
+
+ // Write the data pushed across DMA
+ while (databuffsize--)
+ {
+ temp = *p;
+ if(databuff==(u32 *)TxMessage) // swap half word
+ temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
+ meiLongwordWrite(MEI_DATA_XFR, temp);
+ p++;
+ } // end of "while(..."
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ return MEI_SUCCESS;
+
+} // end of "meiDMAWrite(..."
+
+MEI_ERROR meiDMAWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 *p = databuff;
+ u32 temp;
+ u32 flags;
+
+ if( destaddr & 3)
+ return MEI_FAILURE;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Set the write transfer address
+ meiLongwordWrite(MEI_XFR_ADDR, destaddr);
+
+ // Write the data pushed across DMA
+ while (databuffsize--)
+ {
+ temp = *p;
+ temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
+ meiLongwordWrite(MEI_DATA_XFR, temp);
+ p++;
+ } // end of "while(..."
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ return MEI_SUCCESS;
+
+} // end of "meiDMAWrite_16(..."
+
+MEI_ERROR meiDMAWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 *p = databuff;
+ u32 temp;
+ u32 flags;
+
+ if( destaddr & 3)
+ return MEI_FAILURE;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Set the write transfer address
+ meiLongwordWrite(MEI_XFR_ADDR, destaddr);
+
+ // Write the data pushed across DMA
+ while (databuffsize--)
+ {
+ temp = *p;
+ temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
+ meiLongwordWrite(MEI_DATA_XFR, temp);
+ p++;
+ } // end of "while(..."
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ return MEI_SUCCESS;
+
+} // end of "meiDMAWrite_8(..."
+
+MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 *p = databuff;
+ u32 temp;
+ u32 flags;
+
+ if( srcaddr & 3)
+ return MEI_FAILURE;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Set the read transfer address
+ meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
+
+ // Read the data popped across DMA
+ while (databuffsize--)
+ {
+ meiLongwordRead(MEI_DATA_XFR, &temp);
+ if(databuff==(u32 *)RxMessage) // swap half word
+ temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
+ *p=temp;
+ p++;
+ } // end of "while(..."
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ return MEI_SUCCESS;
+
+} // end of "meiDMARead(..."
+
+MEI_ERROR meiDMARead_16(u32 srcaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 *p = databuff;
+ u32 temp;
+ u32 flags;
+
+ if( srcaddr & 3)
+ return MEI_FAILURE;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Set the read transfer address
+ meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
+
+ // Read the data popped across DMA
+ while (databuffsize--)
+ {
+ meiLongwordRead(MEI_DATA_XFR, &temp);
+ temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
+ *p=temp;
+ p++;
+ } // end of "while(..."
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ return MEI_SUCCESS;
+
+} // end of "meiDMARead_16(..."
+
+MEI_ERROR meiDMARead_8(u32 srcaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 *p = databuff;
+ u32 temp;
+ u32 flags;
+
+ if( srcaddr & 3)
+ return MEI_FAILURE;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Set the read transfer address
+ meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
+
+ // Read the data popped across DMA
+ while (databuffsize--)
+ {
+ meiLongwordRead(MEI_DATA_XFR, &temp);
+ temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
+ *p=temp;
+ p++;
+ } // end of "while(..."
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ return MEI_SUCCESS;
+
+} // end of "meiDMARead_8(..."
+
+void meiPollForDbgDone(void)
+{
+ u32 query = 0;
+ int i=0;
+ while (i<WHILE_DELAY)
+ {
+ meiLongwordRead(ARC_TO_MEI_INT, &query);
+ query &= (ARC_TO_MEI_DBG_DONE);
+ if(query)
+ break;
+ i++;
+ if(i==WHILE_DELAY){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n PollforDbg fail");
+#endif
+ }
+ DEBUG_ACCESS_DELAY;
+ }
+ meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE); // to clear this interrupt
+} // end of "meiPollForDbgDone(..."
+
+MEI_ERROR meiDebugWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 i;
+ u32 temp = 0x0;
+ u32 address = 0x0;
+ u32 *buffer = 0x0;
+ u32 flags;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Open the debug port before DMP memory write
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
+ DEBUG_ACCESS_DELAY;
+
+ // For the requested length, write the address and write the data
+ address = destaddr;
+ buffer = databuff;
+ for (i=0; i < databuffsize; i++)
+ {
+ meiLongwordWrite(MEI_DEBUG_WAD, address);
+ DEBUG_ACCESS_DELAY;
+ temp=*buffer;
+ temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
+ meiLongwordWrite(MEI_DEBUG_DATA, temp);
+ DEBUG_ACCESS_DELAY;
+ meiPollForDbgDone();
+ address += 4;
+ buffer++;
+ } // end of "for(..."
+
+ // Close the debug port after DMP memory write
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ // Return
+ return MEI_SUCCESS;
+
+} // end of "meiDebugWrite_8(..."
+
+MEI_ERROR meiDebugRead_8(u32 srcaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 i;
+ u32 temp = 0x0;
+ u32 address = 0x0;
+ u32 *buffer = 0x0;
+ u32 flags;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Open the debug port before DMP memory read
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
+ DEBUG_ACCESS_DELAY;
+
+ // For the requested length, write the address and read the data
+ address = srcaddr;
+ buffer = databuff;
+ for (i=0; i<databuffsize; i++)
+ {
+ meiLongwordWrite(MEI_DEBUG_RAD, address);
+ DEBUG_ACCESS_DELAY;
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
+ *buffer=temp;
+ address += 4;
+ buffer++;
+ } // end of "for(..."
+
+ // Close the debug port after DMP memory read
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ // Return
+ return MEI_SUCCESS;
+
+} // end of "meiDebugRead_8(..."
+
+MEI_ERROR meiDebugWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 i;
+ u32 temp = 0x0;
+ u32 address = 0x0;
+ u32 *buffer = 0x0;
+ u32 flags;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Open the debug port before DMP memory write
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
+ DEBUG_ACCESS_DELAY;
+
+ // For the requested length, write the address and write the data
+ address = destaddr;
+ buffer = databuff;
+ for (i=0; i < databuffsize; i++)
+ {
+ meiLongwordWrite(MEI_DEBUG_WAD, address);
+ DEBUG_ACCESS_DELAY;
+ temp=*buffer;
+ temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
+ meiLongwordWrite(MEI_DEBUG_DATA, temp);
+ DEBUG_ACCESS_DELAY;
+ meiPollForDbgDone();
+ address += 4;
+ buffer++;
+ } // end of "for(..."
+
+ // Close the debug port after DMP memory write
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ // Return
+ return MEI_SUCCESS;
+
+} // end of "meiDebugWrite_16(..."
+
+MEI_ERROR meiDebugRead_16(u32 srcaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 i;
+ u32 temp = 0x0;
+ u32 address = 0x0;
+ u32 *buffer = 0x0;
+ u32 flags;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Open the debug port before DMP memory read
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
+ DEBUG_ACCESS_DELAY;
+
+ // For the requested length, write the address and read the data
+ address = srcaddr;
+ buffer = databuff;
+ for (i=0; i<databuffsize; i++)
+ {
+ meiLongwordWrite(MEI_DEBUG_RAD, address);
+ DEBUG_ACCESS_DELAY;
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
+ *buffer=temp;
+ address += 4;
+ buffer++;
+ } // end of "for(..."
+
+ // Close the debug port after DMP memory read
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ // Return
+ return MEI_SUCCESS;
+
+} // end of "meiDebugRead_16(..."
+
+MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 i;
+ u32 temp = 0x0;
+ u32 address = 0x0;
+ u32 *buffer = 0x0;
+ u32 flags;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Open the debug port before DMP memory write
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
+ DEBUG_ACCESS_DELAY;
+
+ // For the requested length, write the address and write the data
+ address = destaddr;
+ buffer = databuff;
+ for (i=0; i < databuffsize; i++)
+ {
+ meiLongwordWrite(MEI_DEBUG_WAD, address);
+ DEBUG_ACCESS_DELAY;
+ temp=*buffer;
+ meiLongwordWrite(MEI_DEBUG_DATA, temp);
+ DEBUG_ACCESS_DELAY;
+ meiPollForDbgDone();
+ address += 4;
+ buffer++;
+ } // end of "for(..."
+
+ // Close the debug port after DMP memory write
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ // Return
+ return MEI_SUCCESS;
+
+} // end of "meiDebugWrite(..."
+
+MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize)
+{
+ u32 i;
+ u32 temp = 0x0;
+ u32 address = 0x0;
+ u32 *buffer = 0x0;
+ u32 flags;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ save_flags(flags);
+ cli();
+#endif
+
+
+ // Open the debug port before DMP memory read
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
+ DEBUG_ACCESS_DELAY;
+
+ // For the requested length, write the address and read the data
+ address = srcaddr;
+ buffer = databuff;
+ for (i=0; i<databuffsize; i++)
+ {
+ meiLongwordWrite(MEI_DEBUG_RAD, address);
+ DEBUG_ACCESS_DELAY;
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &temp);
+ DEBUG_ACCESS_DELAY;
+ *buffer=temp;
+ address += 4;
+ buffer++;
+ } // end of "for(..."
+
+ // Close the debug port after DMP memory read
+ meiLongwordRead(MEI_CONTROL, &temp);
+ DEBUG_ACCESS_DELAY;
+ temp &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, temp);
+ DEBUG_ACCESS_DELAY;
+
+#ifdef AMAZON_DMA_DEBUG_MUTEX
+ restore_flags(flags);
+#endif
+
+ // Return
+ return MEI_SUCCESS;
+
+} // end of "meiDebugRead(..."
+EXPORT_SYMBOL(meiDebugRead);
+
+void meiMailboxInterruptsDisable(void)
+{
+ meiLongwordWrite(ARC_TO_MEI_INT_MASK, 0x0);
+} // end of "meiMailboxInterruptsDisable(..."
+
+void meiMailboxInterruptsEnable(void)
+{
+ meiLongwordWrite(ARC_TO_MEI_INT_MASK, MSGAV_EN);
+} // end of "meiMailboxInterruptsEnable(..."
+
+MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize)
+{
+ int i;
+ u32 arc_mailbox_status = 0x0;
+ u32 temp=0;
+ MEI_ERROR meiMailboxError = MEI_SUCCESS;
+
+ // Check arc if mailbox write can be initiated
+/* meiLongwordRead(MEI_TO_ARC_INT, &arc_mailbox_status);
+ if ((arc_mailbox_status & MEI_TO_ARC_MSGAV))
+ {
+ return MEI_MAILBOX_FULL;
+ }
+*/
+ // Write to mailbox
+ meiMailboxError = meiDMAWrite(MEI_TO_ARC_MAILBOX, (u32*)msgsrcbuffer, msgsize/2);
+ meiMailboxError = meiDMAWrite(MEI_TO_ARC_MAILBOXR, (u32 *)(&temp), 1);
+
+ // Notify arc that mailbox write completed
+ cmv_waiting=1;
+ meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
+
+ i=0;
+ while(i<WHILE_DELAY){ // wait for ARC to clear the bit
+ meiLongwordRead(MEI_TO_ARC_INT, &arc_mailbox_status);
+ if((arc_mailbox_status & MEI_TO_ARC_MSGAV) != MEI_TO_ARC_MSGAV)
+ break;
+ i++;
+ if(i==WHILE_DELAY){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n MEI_TO_ARC_MSGAV not cleared by ARC");
+#endif
+ meiMailboxError = MEI_FAILURE;
+#if 0
+ for(i=0;i<msgsize;i++)
+ printk("\n %8x", (*(msgsrcbuffer+i)));
+#endif
+ }
+ }
+
+ // Return
+ return meiMailboxError;
+
+} // end of "meiMailboxWrite(..."
+
+MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize)
+{
+ //u32 arc_mailbox_status = 0x0;
+ //u32 *mei_arc_msgbuff = 0x0;
+ MEI_ERROR meiMailboxError = MEI_SUCCESS;
+
+ /*
+ // Check arc if mailbox read can be initiated
+ meiLongwordRead(ARC_TO_MEI_INT, &arc_mailbox_status);
+ if ((arc_mailbox_status & ARC_TO_MEI_MSGAV) == 0)
+ {
+ return MEI_MAILBOX_EMPTY;
+ } // end of "if(..."
+ */
+
+ // Read from mailbox
+ meiMailboxError = meiDMARead(ARC_TO_MEI_MAILBOX, (u32*)msgdestbuffer, msgsize/2);
+
+ // Notify arc that mailbox read completed
+ meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
+
+ // Return
+ return meiMailboxError;
+
+} // end of "meiMailboxRead(..."
+
+MEI_ERROR meiHaltArc(void)
+{
+ u32 arc_control_mode = 0x0;
+ u32 arc_debug_addr = 0x5;
+ u32 arc_debug_data = 0x0;
+
+ // Switch arc control from JTAG mode to MEI mode- write '1' to bit0
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+ // Write arc aux reg access mask (0x0) into debug addr decode reg
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
+
+ // Write arc debug reg addr (0x5) into debug read addr reg
+ meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
+ meiPollForDbgDone();
+
+ // Read debug data reg and save content
+ meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
+
+ // Write arc debug reg addr (0x5) into debug write addr reg
+ meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
+
+ // Write debug data reg with content ORd with 0x2 (halt bit set)
+ arc_debug_data |= (BIT1);
+ meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data);
+ meiPollForDbgDone();
+
+ // Switch arc control from MEI mode to JTAG mode- write '0' to bit0
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+ // Return
+ return MEI_SUCCESS;
+
+} // end of "meiHalt(..."
+
+MEI_ERROR meiDownloadBootCode(void)
+{
+ u32 arc_control_mode;
+ u32 boot_loop;
+ u32 page_size;
+ u32 dest_addr;
+
+ u32 arc_debug_addr = 0x31F00;
+ u32 arc_debug_data = 0x10;
+ u32 temp;
+// int i;
+
+ //MEI_ERROR meiDMAError = MEI_SUCCESS;
+
+ // Disable mask for arc codeswap interrupts
+ meiMailboxInterruptsDisable();
+
+ // Switch arc control from JTAG mode to MEI mode- write '1' to bit0
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+ // Write (0x10) to CRI_CCR0(0x31F00) to enable ac_clk signal
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
+ meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &temp);
+ temp |=arc_debug_data;
+
+ meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
+ meiLongwordWrite(MEI_DEBUG_DATA, temp);
+ meiPollForDbgDone();
+ //meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
+
+ // Switch arc control from MEI mode to JTAG mode- write '0' to bit0
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+#ifdef AMAZON_MEI_DEBUG_ON //to test ac_clk setting correctness
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
+ meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
+
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+// printk("\n\n ac_clk is %8x\n", arc_debug_data);
+#endif
+
+ /*
+ ** DMA the boot code page(s)
+ */
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk("\n\n start download pages");
+#endif
+ for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++)
+ {
+ if( img_hdr->page[boot_loop].p_size & BOOT_FLAG)
+ {
+ page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
+ if( page_size > 0)
+ {
+ meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size);
+ }
+ }
+ if( img_hdr->page[boot_loop].d_size & BOOT_FLAG)
+ {
+ page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
+ if( page_size > 0)
+ {
+ meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size);
+ }
+ }
+ }
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk("\n\n pages downloaded");
+#endif
+ return MEI_SUCCESS;
+
+} // end of "meiDownloadBootCode(..."
+
+MEI_ERROR meiRunArc(void)
+{
+ u32 arc_control_mode = 0x0;
+ u32 arc_debug_addr = 0x0;
+ u32 arc_debug_data = 0x0;
+
+ // Switch arc control from JTAG mode to MEI mode- write '1' to bit0
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+ // Write arc aux reg access mask (0x0) into debug addr decode reg
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
+
+ // Write arc status aux reg addr (0x0) into debug read addr reg
+ meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
+ meiPollForDbgDone();
+
+ // Read debug data reg and save content
+ meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
+
+ // Write arc status aux reg addr (0x0) into debug write addr reg
+ meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
+
+ // Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared)
+ arc_debug_data &= ~(BIT25);
+ meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data);
+ meiPollForDbgDone();
+
+ // Switch arc control from MEI mode to JTAG mode- write '0' to bit0
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+ // Enable mask for arc codeswap interrupts
+ meiMailboxInterruptsEnable();
+
+ // Return
+ return MEI_SUCCESS;
+
+} // end of "meiActivate(..."
+
+int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest)
+{
+ u32 size;
+ u32 i;
+ u32 *p;
+
+ if( Page > img_hdr->count)
+ return -2;
+
+ /*
+ ** Get program or data size, depending on "data" flag
+ */
+ size = (data == GET_DATA) ? img_hdr->page[ Page].d_size : img_hdr->page[ Page].p_size;
+
+ size &= BOOT_FLAG_MASK; // Clear boot bit!
+ if( size > MaxSize)
+ return -1;
+
+ if( size == 0)
+ return 0;
+ /*
+ ** Get program or data offset, depending on "data" flag
+ */
+ i = data ? img_hdr->page[ Page].d_offset : img_hdr->page[ Page].p_offset;
+
+ /*
+ ** Copy data/program to buffer
+ */
+
+ i /= 4; // Adjust offset for byte-to-UINT for array operation
+
+ p = (u32 *)img_hdr + i;
+ for(i = 0; i < size; i++)
+ Buffer[i] = *p++;
+ /*
+ ** Pass back data/program destination address
+ */
+ *Dest = data ? img_hdr->page[Page].d_dest : img_hdr->page[Page].p_dest;
+
+ return size;
+}
+
+MEI_ERROR meiCMV(u16 * request, int reply) // write cmv to arc, if reply needed, wait for reply
+{
+ MEI_ERROR meierror;
+ wait_queue_t wait;
+
+ cmv_reply=reply;
+
+ meierror = meiMailboxWrite(request, MSG_LENGTH);
+
+ if(meierror != MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n MailboxWrite Fail.");
+#endif
+ return meierror;
+ }
+ else{
+ cmv_count++;
+ }
+
+ if(cmv_reply == NO_REPLY)
+ return MEI_SUCCESS;
+
+ init_waitqueue_entry(&wait, current);
+ add_wait_queue(&wait_queue_arcmsgav, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+// cmv_waiting=1;
+
+ if(arcmsgav==1){
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&wait_queue_arcmsgav, &wait);
+ }
+ else{
+ schedule_timeout(CMV_TIMEOUT);
+ remove_wait_queue(&wait_queue_arcmsgav, &wait);
+ }
+ if(arcmsgav==0){//CMV_timeout
+ cmv_waiting=0;
+ arcmsgav=0;
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n");
+#endif
+ return MEI_MAILBOX_TIMEOUT;
+ }
+ else{
+ arcmsgav=0;
+ reply_count++;
+ return MEI_SUCCESS;
+ }
+}
+
+//TODO, for loopback test
+#ifdef DFE_LOOPBACK
+#define mte_reg_base (0x4800*4+0x20000)
+
+/* Iridia Registers Address Constants */
+#define MTE_Reg(r) (int)(mte_reg_base + (r*4))
+
+#define IT_AMODE MTE_Reg(0x0004)
+
+
+#define OMBOX_BASE 0x15F80
+#define IMBOX_BASE 0x15FC0
+
+#define TIMER_DELAY (1024)
+#define BC0_BYTES (32)
+#define BC1_BYTES (30)
+#define NUM_MB (12)
+#define TIMEOUT_VALUE 2000
+
+void BFMWait (u32 cycle) {
+ u32 i;
+ for (i = 0 ; i< cycle ; i++);
+}
+
+void WriteRegLong(u32 addr, u32 data){
+ //printk("[%8x] <= %8x \n\n", addr, data);
+ *((volatile u32 *)(addr)) = data;
+}
+
+u32 ReadRegLong (u32 addr) {
+ u32 rd_val;
+
+ rd_val = *((volatile u32 *)(addr));
+ //printk("[%8x] => %8x \n\n", addr, rd_val);
+ return rd_val;
+
+}
+
+/* This routine writes the mailbox with the data in an input array */
+void WriteMbox(u32 *mboxarray,u32 size) {
+ u32 i;
+
+ WriteRegLong(MEI_XFR_ADDR,IMBOX_BASE);
+ for (i=0;i<size;i++) {
+ WriteRegLong(MEI_DATA_XFR,*(mboxarray+i));
+ }
+}
+
+/* This routine reads the output mailbox and places the results into an array */
+void ReadMbox(u32 *mboxarray,u32 size) {
+ u32 i;
+
+ WriteRegLong(MEI_XFR_ADDR,OMBOX_BASE);
+ for (i=0;i<size;i++) {
+ mboxarray[i] = ReadRegLong(MEI_DATA_XFR);
+ }
+}
+
+void MEIWriteARCValue(u32 address, u32 value)
+{
+ u32 i,check = 0;
+ /* Write address register */
+ *((volatile u32 *)MEI_DEBUG_WAD) = address;
+
+ /* Write data register */
+ *((volatile u32 *)MEI_DEBUG_DATA) = value;
+
+ /* wait until complete - timeout at 40*/
+ for (i=0;i<40;i++) {
+ check = *((volatile u32 *)ARC_TO_MEI_INT);
+ if ((check & 0x20)) break;
+ //printk("MEIWriteARCValue: check:%8x\n\n", check);
+ }
+
+ /* clear the flag */
+ *((volatile u32 *)ARC_TO_MEI_INT) = 0x20;
+
+}
+
+
+void post_mei_init(void)
+{
+u32 mailbox[NUM_MB];
+
+ mailbox[0] = TIMER_DELAY;
+
+ /* set bytes per bearer channel */
+ mailbox[1] = BC0_BYTES;
+ mailbox[2] = BC1_BYTES;
+ WriteMbox(mailbox, 3);
+
+ WriteRegLong(AAI_ACCESS, 0x00000001);
+
+ /* enable ADSL block clock, ac_clk */
+ WriteRegLong(MEI_CONTROL, 0x01);
+ WriteRegLong(MEI_DEBUG_DEC, 0x00000001); // select ld/st space
+ MEIWriteARCValue(0x31F00, 0x00000010); // write CRI_CCR0 to enable ac_clk
+
+ /* set the MTE to register start */
+ MEIWriteARCValue(IT_AMODE, 0xF);
+ BFMWait(10);
+}
+
+
+int wait_sync(void)
+{
+u32 mailbox[NUM_MB];
+ /* wait for ATM sync to be achieved on both BC0 and BC1 */
+ u32 timeout=0;
+ ReadMbox(mailbox, 1);
+ u32 readval = mailbox[0];
+ while( ((readval & 0xFFFFFFFF) == 0) && (timeout < TIMEOUT_VALUE) ) {
+ BFMWait(1);
+ //printk("wait_sync\n\n");
+ ReadMbox(mailbox, 1);
+ readval = mailbox[0];
+ timeout++;
+ }
+ if(timeout == TIMEOUT_VALUE)return 0;
+ else return 1;
+}
+#endif //DFE_LOOPBACK
+//end of TODO, for loopback test
+
+MEI_ERROR meiForceRebootAdslModem(void)
+{
+#if 0
+//#ifdef ARC_READY_ACK
+ if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready
+ {
+ return -ERESTARTSYS;
+ }
+#endif
+ if(reboot_firsttime==1){//000002:fchang Start
+ // reset ARC
+ *((volatile u32 *)0xB0100910) = 0x80; //reset DFE
+ asm("SYNC");
+ *((volatile u32 *)0xB0100910) = 0x0;
+ asm("SYNC");
+ if((*((volatile u32 *)0xB0100910))!=0x0)
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n reset DFE fail");
+#endif
+
+ // reset ARC
+ meiLongwordWrite(MEI_CONTROL, SOFT_RESET);
+ asm("SYNC");
+ meiLongwordWrite(MEI_CONTROL, 0);
+ asm("SYNC");
+
+ } //000002:fchang End
+#ifdef DFE_LOOPBACK
+ img_hdr=(ARC_IMG_HDR *)lp_image;
+#else
+ img_hdr=(ARC_IMG_HDR *)image_buffer;
+#endif
+// printk("\n\n enter haltarc");
+ meiHaltArc();
+// printk("\n\n haltarc done");
+//000002:fchang Start
+ if(reboot_firsttime==0){
+ printk("\n\n new reboot");
+ meiResetArc();
+ meiResetCore();
+ }
+ if(reboot_firsttime==1)
+ meiDownloadBootCode();
+ else
+ mei_ioctl((struct inode *)NULL, (struct file *)NULL, AMAZON_MEI_DOWNLOAD, (unsigned long)NULL);
+
+//000002:fchang End
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk("\n\n Download Done");
+#endif
+
+#ifdef DFE_LOOPBACK
+ post_mei_init();
+#endif
+
+// sema_init(&mei_sema, 1);
+ //up(&mei_sema);
+
+// enable_irq(AMAZON_MEI_INT);
+
+ meiRunArc();
+//000002:fchang Start
+ if(reboot_firsttime==0){
+ meiEnalbeMailboxInt();
+ }
+//000002:fchang End
+
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk("\n\n ARC Running");
+#endif
+
+#ifdef AMAZON_MEI_DEBUG_ON //to test ac_clk setting correctness
+ {
+ u32 arc_control_mode;
+ u32 arc_debug_addr = 0x31F00;
+ u32 arc_debug_data = 0x10;
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode |= (HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+ meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
+ meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
+
+ meiLongwordRead(MEI_CONTROL, &arc_control_mode);
+ arc_control_mode &= ~(HOST_MSTR);
+ meiLongwordWrite(MEI_CONTROL, arc_control_mode);
+
+// printk("\n\n ac_clk is %8x\n", arc_debug_data);
+ }
+#endif
+
+
+#ifdef DFE_LOOPBACK
+ if (wait_sync() == 0){
+ printk("ARC fails to run: time out\n\n");
+ }else{
+// printk("ARC is ready\n\n");
+ }
+#endif
+ if(reboot_firsttime==1) //000002:fchang
+ reboot_firsttime=0; //000002:fchang
+
+ return MEI_SUCCESS;
+}
+
+//////////////////// procfs debug ////////////////////////////////////////////////////////
+#define MEI_DIRNAME "mei"
+static struct proc_dir_entry *meidir;
+
+static ssize_t proc_write(struct file *, const char *, size_t, loff_t *);
+static ssize_t proc_read(struct file *, char *, size_t, loff_t *);
+
+static struct file_operations proc_operations = {
+ read: proc_read,
+ write: proc_write,
+};
+
+typedef struct reg_entry {
+ int * flag;
+ char name[30]; // big enough to hold names
+ char description[100]; // big enough to hold description
+ unsigned short low_ino;
+} reg_entry_t;
+
+static reg_entry_t regs[PROC_ITEMS]; // total items to be monitored by /proc/mei
+
+#define NUM_OF_REG_ENTRY (sizeof(regs)/sizeof(reg_entry_t))
+
+static int proc_read(struct file * file, char * buf, size_t nbytes, loff_t *ppos)
+{
+ int i_ino = (file->f_dentry->d_inode)->i_ino;
+ char outputbuf[64];
+ int count=0;
+ int i;
+ u32 version=0;
+ reg_entry_t* current_reg=NULL;
+
+ for (i=0;i<NUM_OF_REG_ENTRY;i++) {
+ if (regs[i].low_ino==i_ino) {
+ current_reg = &regs[i];
+ break;
+ }
+ }
+ if (current_reg==NULL)
+ return -EINVAL;
+
+ if (current_reg->flag == (int *) 8){
+ ///proc/mei/version
+ //format:
+ //Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl
+ //Firmware Date Time Code: date/month min:hour
+ if (*ppos>0) /* Assume reading completed in previous read*/
+ return 0; // indicates end of file
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ //if (indicator_count != 1){
+ if (indicator_count < 1){
+ up(&mei_sema);
+ return -EAGAIN;
+ }
+ //major:bits 0-7
+ //minor:bits 8-15
+ makeCMV(H2D_CMV_READ, INFO, 54, 0, 1, NULL);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#if 0
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n WINHOST CMV fail");
+#endif
+#endif
+ up(&mei_sema);
+ return -EIO;
+ }
+ version = RxMessage[4];
+ count = sprintf(outputbuf, "%d.%d.",(version)&0xff,(version>>8)&0xff);
+
+ //sub_version:bits 4-7
+ //int_version:bits 0-3
+ //spl_appl:bits 8-13
+ //rel_state:bits 14-15
+ makeCMV(H2D_CMV_READ, INFO, 54, 1, 1, NULL);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#if 0
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n WINHOST CMV fail");
+#endif
+#endif
+ up(&mei_sema);
+ return -EFAULT;
+ }
+ version =RxMessage[4];
+ count += sprintf(outputbuf+count, "%d.%d.%d.%d",
+ (version>>4)&0xf,
+ version&0xf,
+ (version>>14)&0x3,
+ (version>>8)&0x3f);
+#ifdef ADSL_LED_SUPPORT
+// version check -start for adsl led
+ if ((((version>>4)&0xf)==2)&&((version&0xf)>=3)&&((version&0xf)<7)) firmware_support_led=1;
+ else if ((((version>>4)&0xf)==2)&&((version&0xf)>=7)) firmware_support_led=2;
+ else if (((version>>4)&0xf)>2) firmware_support_led=2;
+
+//165001:henryhsu:20050906:Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash.
+ //else firmware_support_led=0;
+ else firmware_support_led=2;
+//165001
+
+
+// version check -end
+#endif
+ //Date:bits 0-7
+ //Month:bits 8-15
+ makeCMV(H2D_CMV_READ, INFO, 55, 0, 1, NULL);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#if 0
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n WINHOST CMV fail");
+#endif
+#endif
+ up(&mei_sema);
+ return -EIO;
+ }
+ version = RxMessage[4];
+
+ //Hour:bits 0-7
+ //Minute:bits 8-15
+ makeCMV(H2D_CMV_READ, INFO, 55, 1, 1, NULL);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#if 0
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n WINHOST CMV fail");
+#endif
+#endif
+ up(&mei_sema);
+ return -EFAULT;
+ }
+ version += (RxMessage[4]<<16);
+ count += sprintf(outputbuf+count, " %d/%d %d:%d\n"
+ ,version&0xff
+ ,(version>>8)&0xff
+ ,(version>>25)&0xff
+ ,(version>>16)&0xff);
+
+ up(&mei_sema);
+
+ *ppos+=count;
+ }else if(current_reg->flag != (int *)Recent_indicator){
+ if (*ppos>0) /* Assume reading completed in previous read*/
+ return 0; // indicates end of file
+ count = sprintf(outputbuf, "0x%08X\n\n", *(current_reg->flag));
+ *ppos+=count;
+ if (count>nbytes) /* Assume output can be read at one time */
+ return -EINVAL;
+ }else{
+ if((int)(*ppos)/((int)7)==16)
+ return 0; // indicate end of the message
+ count = sprintf(outputbuf, "0x%04X\n\n", *(((u16 *)(current_reg->flag))+ (int)(*ppos)/((int)7)));
+ *ppos+=count;
+ }
+ if (copy_to_user(buf, outputbuf, count))
+ return -EFAULT;
+ return count;
+}
+
+static ssize_t proc_write(struct file * file, const char * buffer, size_t count, loff_t *ppos)
+{
+ int i_ino = (file->f_dentry->d_inode)->i_ino;
+ reg_entry_t* current_reg=NULL;
+ int i;
+ unsigned long newRegValue;
+ char *endp;
+
+ for (i=0;i<NUM_OF_REG_ENTRY;i++) {
+ if (regs[i].low_ino==i_ino) {
+ current_reg = &regs[i];
+ break;
+ }
+ }
+ if ((current_reg==NULL) || (current_reg->flag == (int *)Recent_indicator))
+ return -EINVAL;
+
+ newRegValue = simple_strtoul(buffer,&endp,0);
+ *(current_reg->flag)=(int)newRegValue;
+ return (count+endp-buffer);
+}
+////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]///////////////////////////
+void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data)
+{
+ memset(TxMessage, 0, MSG_LENGTH*2);
+ TxMessage[0]= (opcode<<4) + (size&0xf);
+ TxMessage[1]= (((index==0)?0:1)<<7) + (group&0x7f);
+ TxMessage[2]= address;
+ TxMessage[3]= index;
+ if(opcode == H2D_CMV_WRITE)
+ memcpy(TxMessage+4, data, size*2);
+ return;
+}
+
+////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]///////////////////////////
+void makeCMV_local(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data,u16 *CMVMSG)
+{
+ memset(CMVMSG, 0, MSG_LENGTH*2);
+ CMVMSG[0]= (opcode<<4) + (size&0xf);
+ CMVMSG[1]= (((index==0)?0:1)<<7) + (group&0x7f);
+ CMVMSG[2]= address;
+ CMVMSG[3]= index;
+ if(opcode == H2D_CMV_WRITE)
+ memcpy(CMVMSG+4, data, size*2);
+ return;
+}
+
+//////////////// Driver Structure /////////////////////////////////////////////////////////////////////////////
+static ssize_t mei_write(struct file *, const char *, size_t, loff_t *);
+static int mei_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+
+static struct file_operations mei_operations = {
+ write: mei_write,
+ ioctl: mei_ioctl,
+};
+
+
+static ssize_t mei_write(struct file * filp, const char * buf, size_t size, loff_t * loff)
+{
+// printk("\n\n mei_write entered");
+// image_buffer = (u32 *)kmalloc(size, GFP_KERNEL);
+ image_buffer = (u32 *)vmalloc(size);
+// printk("\n\n image_buffer kmalloc done");
+ if(image_buffer == NULL){
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk("\n\n kmalloc for firmware image fail");
+ printk("\n\n vmalloc for firmware image fail");
+#endif
+ return -1;
+ }
+ copy_from_user((char *)image_buffer, buf, size);
+// printk("\n\n copy_from_user done");
+ return size;
+}
+
+ ////////// ISR GPTU Timer 6 for high resolution timer /////////////
+void amazon_timer6_interrupt_MEI(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int i,j;
+ u32 temp;
+ u16 temp16;
+ u16 rdindex, wrindex;
+ u16 num_rd=0; //num of byte can be read
+ u16 bytes_to_wr=0;
+
+// printk("\n\nenter timer\n\n");
+ irqtimes++;
+// printk("\n%d\n",irqtimes);
+
+
+/*
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_8(0x30f20, &temp, 1);
+#else
+ meiDMARead_8(0x30f20, &temp, 1);
+#endif
+ if((temp&0x4000)!=0){
+ printk("\nER_ERR");
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugWrite_8(0x30f20, &temp, 1);
+#else
+ meiDMAWrite_8(0x30f20, &temp, 1);
+#endif
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_8(0x30f20, &temp, 1);
+#else
+ meiDMARead_8(0x30f20, &temp, 1);
+#endif
+ if((temp&0x4000)!=0)
+ printk("\nER_ERR not cleared");
+ }
+*/
+
+ for(i=PCM_CHANNEL_NUM-1;i>=0;i--){// start from last channel, which is rx
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
+#else
+ meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
+#endif
+ wrindex = (u16)((temp & 0xffff0000)>>16);
+// printk(" %d",wrindex);
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1);
+#else
+ meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1);
+#endif
+ rdindex = (u16)(temp & 0xffff);
+// printk(" %d",rdindex);
+ if(rdindex<=wrindex)
+ num_rd=((wrindex-rdindex)/4)*4; //read multiply of 4 bytes
+ else
+ num_rd=((pcm_data[i].len-(rdindex-wrindex))/4)*4; //read multiply of 4 bytes
+
+ if(i%2!=0){//rx channel
+ pcm_data[i].point=0;
+ for(j=0;j<num_rd/4;j++){
+ if(pcm_data[i].finish!=1){
+ if((rdindex+j*4)>=pcm_data[i].len)
+ temp16=(rdindex+j*4) - pcm_data[i].len;
+ else
+ temp16=rdindex+j*4;
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
+#else
+ meiDMARead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
+#endif
+ // printk(" %8x", *((u32*)(pcm_data[i].buff+pcm_data[i].point)));
+ /* if(pcm_data[i].point==0){
+ if(pcm_data[i].buff[0]==0xA5){// start of loopback data
+ pcm_data[i].point+=4;
+ printk("\nstart receive data");
+ }
+ }
+ else*/
+ pcm_data[i].point+=4;
+ /* if(pcm_data[i].point==PCM_BUFF_SIZE){ //finish rx
+ pcm_data[i].finish=1;
+ printk("\nchannel[%d] finished", i);
+ } */
+ }
+ }
+ if(firsttime[i]==1){
+ for(j=0;j<num_rd;j++){
+ if(pcm_data[i].buff[j]==0x1){
+ num_cmp[i]=num_rd-j;
+ firsttime[i]=0;
+ break;
+ }
+ }
+ if(memcmp(sampledata+1, pcm_data[i].buff+j, num_cmp[i])!=0)
+ printk("\n\ndata wrong,1st\n\n");
+ else
+ pcm_start_loc[i] = num_cmp[i]+1;
+ }
+ else{
+ if(memcmp(sampledata+pcm_start_loc[i], pcm_data[i].buff, num_rd)!=0)
+ printk("\n\ndata wrong\n\n");
+ else{
+ pcm_start_loc[i]+=num_rd;
+ if(pcm_start_loc[i]>=256)
+ pcm_start_loc[i]=pcm_start_loc[i]-256;
+ }
+ }
+
+ rdindex +=num_rd;
+ if(rdindex>=pcm_data[i].len)
+ rdindex=rdindex-pcm_data[i].len;
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1);
+#else
+ meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1);
+#endif
+ temp= (temp & 0xffff0000) + rdindex;
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex
+#else
+ meiDMAWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex
+#endif
+
+ bytes_to_wr = num_rd;
+
+ // if(bytes_to_wr>0){
+ // printk(" %d", num_rd);
+ // printk(" %d", rdindex);
+// printk("\n\nrdindex = %d", rdindex);
+ //}
+ }
+ else{ //tx channel
+ // if((bytes_to_wr + num_rd) < pcm_data[i].len){
+ for(j=0;j<bytes_to_wr/4;j++){
+ if(pcm_data[i].finish!=1){
+ if((wrindex+j*4)>=pcm_data[i].len)
+ temp16=(wrindex+j*4) - pcm_data[i].len;
+ else
+ temp16=wrindex + j*4;
+/*
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1);
+#else
+ meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1);
+#endif*/
+
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
+ // meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff), 1);
+#else
+ meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
+#endif
+ pcm_data[i].point+=4;
+ if(pcm_data[i].point==PCM_BUFF_SIZE){
+ // pcm_data[i].finish=1;
+ // printk("\nchannel[%d] finished", i);
+ pcm_data[i].point=0;
+ }
+ }
+ }
+ wrindex+=bytes_to_wr;
+ if(wrindex>=pcm_data[i].len)
+ wrindex=wrindex-pcm_data[i].len;
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
+#else
+ meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
+#endif
+ temp=(temp&0xffff) + (wrindex<<16);
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex
+#else
+ meiDMAWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex
+#endif
+
+ //if(bytes_to_wr>0){
+ // printk(" %d", bytes_to_wr);
+ // printk(" %d", wrindex);
+// printk("\n\nwrindex = %d", wrindex);
+ //}
+ // }
+ }
+ }
+ return;
+}
+//000002:fchang Start
+static int meiResetArc(void)
+{
+ u32 auxreg0;
+ u32 auxreg5;
+ int flshcnt=0;
+ int flshcnt1=0;
+ int flshcnt2=0;
+
+ meiLongwordWrite(MEI_CONTROL, 1);
+ meiLongwordWrite(MEI_DEBUG_DEC, 3);
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x3c);
+ meiLongwordWrite(MEI_DEBUG_DATA, 0x10);
+ meiPollForDbgDone();
+ meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x2);
+ meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
+ meiPollForDbgDone();
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x3);
+ meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
+ meiPollForDbgDone();
+ meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
+ meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
+ auxreg0 = auxreg0 & 0x03ffffff;
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x0);
+ meiLongwordWrite(MEI_DEBUG_DATA, auxreg0);
+ meiPollForDbgDone();
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x10a);
+ meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
+ meiPollForDbgDone();
+ meiLongwordWrite(MEI_DEBUG_DEC, 0x2);
+ meiLongwordWrite(MEI_DEBUG_WAD, 0xfffc);
+ meiLongwordWrite(MEI_DEBUG_DATA, 0x1fffffff);
+ meiPollForDbgDone();
+ while(flshcnt<3){
+ meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
+ meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
+ auxreg0 = auxreg0 & 0xff000000;
+ auxreg0 = auxreg0 | 0x3fff;
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x0);
+ meiLongwordWrite(MEI_DEBUG_DATA, auxreg0);
+ meiPollForDbgDone();
+
+ meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
+ meiLongwordWrite(MEI_DEBUG_RAD, 0x5);
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &auxreg5);
+ auxreg5 = auxreg5 | 0x801;
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x5);
+ meiLongwordWrite(MEI_DEBUG_DATA, auxreg5);
+ meiPollForDbgDone();
+ meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
+ meiPollForDbgDone();
+ meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
+ auxreg0 = auxreg0 & 0x00ffffff;
+ if(auxreg0 == 0x4000)
+ flshcnt = flshcnt+1;
+ else{
+ if(flshcnt == 0)
+ flshcnt1 = flshcnt1 +1;
+ else
+ flshcnt2 = flshcnt2 +1;
+ }
+ }
+
+ return 1;
+}
+
+static int meiResetCore(void)
+{
+ meiLongwordWrite(MEI_CONTROL, 0x1);
+ meiLongwordWrite(MEI_DEBUG_DEC, 0x2);
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10);
+ meiLongwordWrite(MEI_DEBUG_DATA, 0xf);
+ meiPollForDbgDone();
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10);
+ meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
+ meiPollForDbgDone();
+ meiLongwordWrite(MEI_DEBUG_WAD, 0x31f00);
+ meiLongwordWrite(MEI_DEBUG_DATA, 0x55);
+ meiPollForDbgDone();
+ return 1;
+}
+
+static int meiEnalbeMailboxInt(void)
+{
+ u32 arc2meiintmsk;
+ meiLongwordRead(ARC_TO_MEI_INT_MASK, &arc2meiintmsk);
+ arc2meiintmsk = arc2meiintmsk | 0x1;
+ meiLongwordWrite(ARC_TO_MEI_INT_MASK, arc2meiintmsk);
+ meiLongwordWrite(MEI_CONTROL, 0x0);
+ return 1;
+}
+
+
+
+//000002:fchang End
+
+static int mei_ioctl(struct inode * ino, struct file * fil, unsigned int command, unsigned long lon)
+{
+ int i,k;
+ u32 boot_loop;
+ u32 page_size;
+ u32 dest_addr;
+ u32 j;
+ u32 temp;
+ u32 temp2;
+ u16 trapsflag=0;
+ amazon_clreoc_pkt * current_clreoc;
+ struct timeval time_now;
+ struct timeval time_fini;
+ struct list_head * ptr;
+ amazon_mei_mib * mib_ptr;
+// u16 buff[MSG_LENGTH]__attribute__ ((aligned(4)));
+ structpts pts;
+ int meierr=MEI_SUCCESS;
+ u16 data[12]; //used in makeCMV, to pass in payload when CMV set, ignored when CMV read.
+ meireg regrdwr;
+ meidebug debugrdwr;
+ amazon_mei_mib * temp_intvl;
+ struct sk_buff * eoc_skb;
+// 603221:tc.chen start
+ u16 hdlc_cmd[2];
+ u16 hdlc_rx_buffer[32];
+ int hdlc_rx_len=0;
+// 603221:tc.chen end
+
+ int from_kernel = 0;//joelin
+ if (ino == (struct inode *)0) from_kernel = 1;//joelin
+
+// printk("\n switch.command = %i\n", command);
+ switch(command){
+ case GET_ADSL_LINE_CODE:
+ pts.adslLineTableEntry_pt = (adslLineTableEntry *)kmalloc(sizeof(adslLineTableEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineTableEntry_pt, (char *)lon, sizeof(adslLineTableEntry));
+ if(IS_FLAG_SET((&(pts.adslLineTableEntry_pt->flags)), LINE_CODE_FLAG)){
+ pts.adslLineTableEntry_pt->adslLineCode = 2;
+ }
+ copy_to_user((char *)lon, (char *)pts.adslLineTableEntry_pt, sizeof(adslLineTableEntry));
+ kfree(pts.adslLineTableEntry_pt);
+ break;
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case GET_ADSL_ATUC_LINE_EXT:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+ pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry));
+ if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG)){
+ ATUC_LINE_TRANS_CAP_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 67 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucCap)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){
+ ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 67 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG)){
+ ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 2 Address 1 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucActual)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG)){ // not supported currently
+/*
+ LINE_GLITE_POWER_STATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 2 Address 0 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslLineExtTableEntry_pt->adslLineGlitePowerState)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+*/
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);
+ }
+ copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry));
+ kfree(pts.adslLineTableEntry_pt);
+ up(&mei_sema);
+ break;
+#endif
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case SET_ADSL_ATUC_LINE_EXT:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+ pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry));
+
+ //only adslLineTransAtucConfig can be set.
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG);
+ if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){
+ memcpy(data,(&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), 2);
+ ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 67 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG);
+ }
+ }
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG);
+ CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);
+
+ copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry));
+ kfree(pts.adslLineTableEntry_pt);
+ up(&mei_sema);
+ break;
+#endif
+
+ case GET_ADSL_ATUC_PHY:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslAtucPhysEntry_pt = (adslAtucPhysEntry *)kmalloc(sizeof(adslAtucPhysEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAtucPhysEntry_pt, (char *)lon, sizeof(adslAtucPhysEntry));
+ if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG)){
+ ATUC_PHY_SER_NUM_FLAG_MAKECMV1;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 57 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG);
+ }
+ else{
+ memcpy(pts.adslAtucPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ ATUC_PHY_SER_NUM_FLAG_MAKECMV2;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 57 Index 12");
+#endif
+ CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG);
+ }
+ else{
+ memcpy((pts.adslAtucPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG)){
+ ATUC_PHY_VENDOR_ID_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 64 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG);
+ }
+ else{
+ memcpy(pts.adslAtucPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG)){
+ ATUC_PHY_VER_NUM_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 58 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG);
+ }
+ else{
+ memcpy(pts.adslAtucPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_STAT_FLAG)){
+ pts.adslAtucPhysEntry_pt->status = CurrStatus.adslAtucCurrStatus;
+ }
+ if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG)){
+ ATUC_CURR_OUT_PWR_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 68 Index 5");
+#endif
+ CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslAtucPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG)){
+ ATUC_CURR_ATTR_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 69 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslAtucPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ copy_to_user((char *)lon, (char *)pts.adslAtucPhysEntry_pt, sizeof(adslAtucPhysEntry));
+ kfree(pts.adslAtucPhysEntry_pt);
+
+ up(&mei_sema);
+ break;
+ case GET_ADSL_ATUR_PHY:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslAturPhysEntry_pt = (adslAturPhysEntry *)kmalloc(sizeof(adslAturPhysEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAturPhysEntry_pt, (char *)lon, sizeof(adslAturPhysEntry));
+ if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG)){
+ ATUR_PHY_SER_NUM_FLAG_MAKECMV1;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 62 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG);
+ }
+ else{
+ memcpy(pts.adslAturPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ ATUR_PHY_SER_NUM_FLAG_MAKECMV2;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 62 Index 12");
+#endif
+ CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG);
+ }
+ else{
+ memcpy((pts.adslAturPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG)){
+ ATUR_PHY_VENDOR_ID_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 65 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG);
+ }
+ else{
+ memcpy(pts.adslAturPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG)){
+ ATUR_PHY_VER_NUM_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 61 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG);
+ }
+ else{
+ memcpy(pts.adslAturPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG)){
+ ATUR_SNRMGN_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 68 Index 4");
+#endif
+ CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslAturPhysEntry_pt->SnrMgn)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG)){
+ ATUR_ATTN_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 68 Index 2");
+#endif
+ CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslAturPhysEntry_pt->Attn)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_STAT_FLAG)){
+ pts.adslAturPhysEntry_pt->status = CurrStatus.adslAturCurrStatus;
+ }
+ if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG)){
+ ATUR_CURR_OUT_PWR_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 69 Index 5");
+#endif
+ CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslAturPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG)){
+ ATUR_CURR_ATTR_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 68 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslAturPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ copy_to_user((char *)lon, (char *)pts.adslAturPhysEntry_pt, sizeof(adslAturPhysEntry));
+ kfree(pts.adslAturPhysEntry_pt);
+
+ up(&mei_sema);
+ break;
+ case GET_ADSL_ATUC_CHAN_INFO:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslAtucChanInfo_pt = (adslAtucChanInfo *)kmalloc(sizeof(adslAtucChanInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAtucChanInfo_pt, (char *)lon, sizeof(adslAtucChanInfo));
+ if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG)){
+ if((chantype.interleave!=1) || (chantype.fast==1)){
+ CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG);
+ }
+ else{
+ ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 3 Index 1");
+#endif
+ CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslAtucChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG)){
+ ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 1 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG);
+ }
+ else{
+ pts.adslAtucChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_PREV_TX_RATE_FLAG)){
+ pts.adslAtucChanInfo_pt->prevTxRate = PrevTxRate.adslAtucChanPrevTxRate;
+ }
+ copy_to_user((char *)lon, (char *)pts.adslAtucChanInfo_pt, sizeof(adslAtucChanInfo));
+ kfree(pts.adslAtucChanInfo_pt);
+
+ up(&mei_sema);
+ break;
+ case GET_ADSL_ATUR_CHAN_INFO:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslAturChanInfo_pt = (adslAturChanInfo *)kmalloc(sizeof(adslAturChanInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAturChanInfo_pt, (char *)lon, sizeof(adslAturChanInfo));
+ if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG)){
+ if((chantype.interleave!=1) || (chantype.fast==1)){
+ CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG);
+ }
+ else{
+ ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 2 Index 1");
+#endif
+ CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG);
+ }
+ else{
+ memcpy((&(pts.adslAturChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2));
+ }
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG)){
+ ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 0 Index 0");
+#endif
+ CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG);
+ }
+ else{
+ pts.adslAturChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_PREV_TX_RATE_FLAG)){
+ pts.adslAturChanInfo_pt->prevTxRate = PrevTxRate.adslAturChanPrevTxRate;
+ }
+ if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG)){
+ // ? no CMV to update this
+ CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG);
+ }
+ copy_to_user((char *)lon, (char *)pts.adslAturChanInfo_pt, sizeof(adslAturChanInfo));
+ kfree(pts.adslAturChanInfo_pt);
+
+ up(&mei_sema);
+ break;
+ case GET_ADSL_ATUC_PERF_DATA:
+ pts.atucPerfDataEntry_pt = (atucPerfDataEntry *)kmalloc(sizeof(atucPerfDataEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.atucPerfDataEntry_pt, (char *)lon, sizeof(atucPerfDataEntry));
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOFS_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfLofs=ATUC_PERF_LOFS;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOSS_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfLoss=ATUC_PERF_LOSS;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_ESS_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfESs=ATUC_PERF_ESS;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INITS_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfInits=ATUC_PERF_INITS;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_VALID_INTVLS_FLAG)){
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i++;
+ if(i==96)
+ break;
+ }
+ pts.atucPerfDataEntry_pt->adslAtucPerfValidIntervals=i;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INVALID_INTVLS_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfInvalidIntervals=0;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
+ do_gettimeofday(&time_now);
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOFS_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLofs=current_intvl->AtucPerfLof;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOSS_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLoss=current_intvl->AtucPerfLos;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_ESS_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinESs=current_intvl->AtucPerfEs;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_INIT_FLAG)){
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinInits=current_intvl->AtucPerfInit;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i+=900;
+ }
+ do_gettimeofday(&time_now);
+ i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
+ if(i>=86400)
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i-86400;
+ else
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOFS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfLof;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AtucPerfLof;
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLofs=j;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOSS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfLos;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AtucPerfLos;
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLoss=j;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_ESS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfEs;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AtucPerfEs;
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayESs=j;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_INIT_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfInit;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AtucPerfInit;
+ pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayInits=j;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_MON_SEC_FLAG)){
+ i=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ i++;
+ }
+ if(i>=96)
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=86400;
+ else
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=0;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOFS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfLof;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=j;
+ else
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=0;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOSS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfLos;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=j;
+ else
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=0;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_ESS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfEs;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=j;
+ else
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=0;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_INITS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfInit;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=j;
+ else
+ pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=0;
+ }
+
+ copy_to_user((char *)lon, (char *)pts.atucPerfDataEntry_pt, sizeof(atucPerfDataEntry));
+ kfree(pts.atucPerfDataEntry_pt);
+ break;
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case GET_ADSL_ATUC_PERF_DATA_EXT: //??? CMV mapping not available
+ pts.atucPerfDataExtEntry_pt = (atucPerfDataExtEntry *)kmalloc(sizeof(atucPerfDataExtEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.atucPerfDataExtEntry_pt, (char *)lon, sizeof(atucPerfDataExtEntry));
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FASTR_FLAG)){
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFastR=ATUC_PERF_STAT_FASTR;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FAILED_FASTR_FLAG)){
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFailedFastR=ATUC_PERF_STAT_FAILED_FASTR;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_SESL_FLAG)){
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfStatSesL=ATUC_PERF_STAT_SESL;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_UASL_FLAG)){
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfStatUasL=ATUC_PERF_STAT_UASL;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FASTR_FLAG)){
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFastR=current_intvl->AtucPerfStatFastR;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG)){
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFailedFastR=current_intvl->AtucPerfStatFailedFastR;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_SESL_FLAG)){
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinSesL=current_intvl->AtucPerfStatSesL;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_UASL_FLAG)){
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinUasL=current_intvl->AtucPerfStatUasL;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FASTR_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfStatFastR;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AtucPerfStatFastR;
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFastR=j;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfStatFailedFastR;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AtucPerfStatFailedFastR;
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFailedFastR=j;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_SESL_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfStatSesL;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AtucPerfStatSesL;
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DaySesL=j;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_UASL_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfStatUasL;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AtucPerfStatUasL;
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayUasL=j;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FASTR_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfStatFastR;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=j;
+ else
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=0;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfStatFailedFastR;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=j;
+ else
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=0;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_SESL_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfStatSesL;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=j;
+ else
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=0;
+ }
+ if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_UASL_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AtucPerfStatUasL;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=j;
+ else
+ pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=0;
+ }
+ copy_to_user((char *)lon, (char *)pts.atucPerfDataExtEntry_pt, sizeof(atucPerfDataExtEntry));
+ kfree(pts.atucPerfDataExtEntry_pt);
+ break;
+#endif
+ case GET_ADSL_ATUR_PERF_DATA:
+ pts.aturPerfDataEntry_pt = (aturPerfDataEntry *)kmalloc(sizeof(aturPerfDataEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.aturPerfDataEntry_pt, (char *)lon, sizeof(aturPerfDataEntry));
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOFS_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfLofs=ATUR_PERF_LOFS;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOSS_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfLoss=ATUR_PERF_LOSS;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LPR_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfLprs=ATUR_PERF_LPR;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_ESS_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfESs=ATUR_PERF_ESS;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_VALID_INTVLS_FLAG)){
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i++;
+ if(i==96)
+ break;
+ }
+ pts.aturPerfDataEntry_pt->adslAturPerfValidIntervals=i;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_INVALID_INTVLS_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfInvalidIntervals=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
+ do_gettimeofday(&time_now);
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOFS_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLofs=current_intvl->AturPerfLof;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOSS_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLoss=current_intvl->AturPerfLos;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LPR_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLprs=current_intvl->AturPerfLpr;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_ESS_FLAG)){
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinESs=current_intvl->AturPerfEs;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i+=900;
+ }
+ do_gettimeofday(&time_now);
+ i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
+ if(i>=86400)
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i-86400;
+ else
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOFS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfLof;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturPerfLof;
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLofs=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOSS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfLos;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturPerfLos;
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLoss=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LPR_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfLpr;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturPerfLpr;
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLprs=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_ESS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfEs;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturPerfEs;
+ pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayESs=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_MON_SEC_FLAG)){
+ i=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ i++;
+ }
+ if(i>=96)
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=86400;
+ else
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOFS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfLof;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=j;
+ else
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOSS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfLos;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=j;
+ else
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LPR_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfLpr;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=j;
+ else
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_ESS_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfEs;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=j;
+ else
+ pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=0;
+ }
+
+ copy_to_user((char *)lon, (char *)pts.aturPerfDataEntry_pt, sizeof(aturPerfDataEntry));
+ kfree(pts.aturPerfDataEntry_pt);
+ break;
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case GET_ADSL_ATUR_PERF_DATA_EXT:
+ pts.aturPerfDataExtEntry_pt = (aturPerfDataExtEntry *)kmalloc(sizeof(aturPerfDataExtEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.aturPerfDataExtEntry_pt, (char *)lon, sizeof(aturPerfDataExtEntry));
+ if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_SESL_FLAG)){
+ pts.aturPerfDataExtEntry_pt->adslAturPerfStatSesL=ATUR_PERF_STAT_SESL;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_UASL_FLAG)){
+ pts.aturPerfDataExtEntry_pt->adslAturPerfStatUasL=ATUR_PERF_STAT_UASL;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_SESL_FLAG)){
+ pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinSesL=current_intvl->AturPerfStatSesL;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_UASL_FLAG)){
+ pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinUasL=current_intvl->AturPerfStatUasL;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_SESL_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfStatSesL;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturPerfStatSesL;
+ pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DaySesL=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_UASL_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfStatUasL;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturPerfStatUasL;
+ pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DayUasL=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_SESL_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfStatSesL;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=j;
+ else
+ pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_UASL_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturPerfStatUasL;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=j;
+ else
+ pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=0;
+ }
+ copy_to_user((char *)lon, (char *)pts.aturPerfDataExtEntry_pt, sizeof(aturPerfDataExtEntry));
+ kfree(pts.aturPerfDataExtEntry_pt);
+ break;
+#endif
+ case GET_ADSL_ATUC_INTVL_INFO:
+ pts.adslAtucIntvlInfo_pt = (adslAtucIntvlInfo *)kmalloc(sizeof(adslAtucIntvlInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAtucIntvlInfo_pt, (char *)lon, sizeof(adslAtucIntvlInfo));
+
+ if(pts.adslAtucIntvlInfo_pt->IntervalNumber <1){
+ pts.adslAtucIntvlInfo_pt->intervalLOF = ATUC_PERF_LOFS;
+ pts.adslAtucIntvlInfo_pt->intervalLOS = ATUC_PERF_LOSS;
+ pts.adslAtucIntvlInfo_pt->intervalES = ATUC_PERF_ESS;
+ pts.adslAtucIntvlInfo_pt->intervalInits = ATUC_PERF_INITS;
+ pts.adslAtucIntvlInfo_pt->intervalValidData = 1;
+ }
+ else{
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i++;
+ if(i==pts.adslAtucIntvlInfo_pt->IntervalNumber){
+ temp_intvl = list_entry(ptr, amazon_mei_mib, list);
+ pts.adslAtucIntvlInfo_pt->intervalLOF = temp_intvl->AtucPerfLof;
+ pts.adslAtucIntvlInfo_pt->intervalLOS = temp_intvl->AtucPerfLos;
+ pts.adslAtucIntvlInfo_pt->intervalES = temp_intvl->AtucPerfEs;
+ pts.adslAtucIntvlInfo_pt->intervalInits = temp_intvl->AtucPerfInit;
+ pts.adslAtucIntvlInfo_pt->intervalValidData = 1;
+ break;
+ }
+ }
+ if(ptr==&interval_list){
+ pts.adslAtucIntvlInfo_pt->intervalValidData = 0;
+ pts.adslAtucIntvlInfo_pt->flags = 0;
+ pts.adslAtucIntvlInfo_pt->intervalLOF = 0;
+ pts.adslAtucIntvlInfo_pt->intervalLOS = 0;
+ pts.adslAtucIntvlInfo_pt->intervalES = 0;
+ pts.adslAtucIntvlInfo_pt->intervalInits = 0;
+ }
+ }
+
+ copy_to_user((char *)lon, (char *)pts.adslAtucIntvlInfo_pt, sizeof(adslAtucIntvlInfo));
+ kfree(pts.adslAtucIntvlInfo_pt);
+ break;
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case GET_ADSL_ATUC_INTVL_EXT_INFO:
+ pts.adslAtucInvtlExtInfo_pt = (adslAtucInvtlExtInfo *)kmalloc(sizeof(adslAtucInvtlExtInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAtucInvtlExtInfo_pt, (char *)lon, sizeof(adslAtucInvtlExtInfo));
+ if(pts.adslAtucInvtlExtInfo_pt->IntervalNumber <1){
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = ATUC_PERF_STAT_FASTR;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = ATUC_PERF_STAT_FAILED_FASTR;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = ATUC_PERF_STAT_SESL;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = ATUC_PERF_STAT_UASL;
+// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1;
+ }
+ else{
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i++;
+ if(i==pts.adslAtucInvtlExtInfo_pt->IntervalNumber){
+ temp_intvl = list_entry(ptr, amazon_mei_mib, list);
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = temp_intvl->AtucPerfStatFastR;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = temp_intvl->AtucPerfStatFailedFastR;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = temp_intvl->AtucPerfStatSesL;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = temp_intvl->AtucPerfStatUasL;
+// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1;
+ break;
+ }
+ }
+ if(ptr==&interval_list){
+// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 0;
+ pts.adslAtucInvtlExtInfo_pt->flags = 0;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = 0;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = 0;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = 0;
+ pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = 0;
+ }
+ }
+ copy_to_user((char *)lon, (char *)pts.adslAtucInvtlExtInfo_pt, sizeof(adslAtucInvtlExtInfo));
+ kfree(pts.adslAtucInvtlExtInfo_pt);
+ break;
+#endif
+ case GET_ADSL_ATUR_INTVL_INFO:
+ pts.adslAturIntvlInfo_pt = (adslAturIntvlInfo *)kmalloc(sizeof(adslAturIntvlInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAturIntvlInfo_pt, (char *)lon, sizeof(adslAturIntvlInfo));
+
+ if(pts.adslAturIntvlInfo_pt->IntervalNumber <1){
+ pts.adslAturIntvlInfo_pt->intervalLOF = ATUR_PERF_LOFS;
+ pts.adslAturIntvlInfo_pt->intervalLOS = ATUR_PERF_LOSS;
+ pts.adslAturIntvlInfo_pt->intervalES = ATUR_PERF_ESS;
+ pts.adslAturIntvlInfo_pt->intervalLPR = ATUR_PERF_LPR;
+ pts.adslAturIntvlInfo_pt->intervalValidData = 1;
+ }
+ else{
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i++;
+ if(i==pts.adslAturIntvlInfo_pt->IntervalNumber){
+ temp_intvl = list_entry(ptr, amazon_mei_mib, list);
+ pts.adslAturIntvlInfo_pt->intervalLOF = temp_intvl->AturPerfLof;
+ pts.adslAturIntvlInfo_pt->intervalLOS = temp_intvl->AturPerfLos;
+ pts.adslAturIntvlInfo_pt->intervalES = temp_intvl->AturPerfEs;
+ pts.adslAturIntvlInfo_pt->intervalLPR = temp_intvl->AturPerfLpr;
+ pts.adslAturIntvlInfo_pt->intervalValidData = 1;
+ break;
+ }
+ }
+ if(ptr==&interval_list){
+ pts.adslAturIntvlInfo_pt->intervalValidData = 0;
+ pts.adslAturIntvlInfo_pt->flags = 0;
+ pts.adslAturIntvlInfo_pt->intervalLOF = 0;
+ pts.adslAturIntvlInfo_pt->intervalLOS = 0;
+ pts.adslAturIntvlInfo_pt->intervalES = 0;
+ pts.adslAturIntvlInfo_pt->intervalLPR = 0;
+ }
+ }
+
+ copy_to_user((char *)lon, (char *)pts.adslAturIntvlInfo_pt, sizeof(adslAturIntvlInfo));
+ kfree(pts.adslAturIntvlInfo_pt);
+ break;
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case GET_ADSL_ATUR_INTVL_EXT_INFO:
+ pts.adslAturInvtlExtInfo_pt = (adslAturInvtlExtInfo *)kmalloc(sizeof(adslAturInvtlExtInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAturInvtlExtInfo_pt, (char *)lon, sizeof(adslAturInvtlExtInfo));
+
+ if(pts.adslAturInvtlExtInfo_pt->IntervalNumber <1){
+ pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = ATUR_PERF_STAT_SESL;
+ pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = ATUR_PERF_STAT_UASL;
+// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1;
+ }
+ else{
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i++;
+ if(i==pts.adslAturInvtlExtInfo_pt->IntervalNumber){
+ temp_intvl = list_entry(ptr, amazon_mei_mib, list);
+ pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = temp_intvl->AturPerfStatSesL;
+ pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = temp_intvl->AturPerfStatUasL;
+// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1;
+ break;
+ }
+ }
+ if(ptr==&interval_list){
+// pts.adslAturInvtlExtInfo_pt->intervalValidData = 0;
+ pts.adslAturInvtlExtInfo_pt->flags = 0;
+ pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = 0;
+ pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = 0;
+ }
+ }
+
+ copy_to_user((char *)lon, (char *)pts.adslAturInvtlExtInfo_pt, sizeof(adslAturInvtlExtInfo));
+ kfree(pts.adslAturInvtlExtInfo_pt);
+ break;
+#endif
+ case GET_ADSL_ATUC_CHAN_PERF_DATA:
+ pts.atucChannelPerfDataEntry_pt = (atucChannelPerfDataEntry *)kmalloc(sizeof(atucChannelPerfDataEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.atucChannelPerfDataEntry_pt, (char *)lon, sizeof(atucChannelPerfDataEntry));
+
+ pts.atucChannelPerfDataEntry_pt->flags = 0;
+
+ copy_to_user((char *)lon, (char *)pts.atucChannelPerfDataEntry_pt, sizeof(atucChannelPerfDataEntry));
+ kfree(pts.atucChannelPerfDataEntry_pt);
+ break;
+ case GET_ADSL_ATUR_CHAN_PERF_DATA:
+ pts.aturChannelPerfDataEntry_pt = (aturChannelPerfDataEntry *)kmalloc(sizeof(aturChannelPerfDataEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.aturChannelPerfDataEntry_pt, (char *)lon, sizeof(aturChannelPerfDataEntry));
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_RECV_BLK_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanReceivedBlks=ATUR_CHAN_RECV_BLK;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_TX_BLK_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanTransmittedBlks=ATUR_CHAN_TX_BLK;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_CORR_BLK_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanCorrectedBlks=ATUR_CHAN_CORR_BLK;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_UNCORR_BLK_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanUncorrectBlks=ATUR_CHAN_UNCORR_BLK;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_VALID_INTVL_FLAG)){
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i++;
+ if(i==96)
+ break;
+ }
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfValidIntervals=i;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_INVALID_INTVL_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfInvalidIntervals=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
+ do_gettimeofday(&time_now);
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinReceivedBlks=current_intvl->AturChanPerfRxBlk;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTransmittedBlks=current_intvl->AturChanPerfTxBlk;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinCorrectedBlks=current_intvl->AturChanPerfCorrBlk;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG)){
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinUncorrectBlks=current_intvl->AturChanPerfUncorrBlk;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i+=900;
+ }
+ do_gettimeofday(&time_now);
+ i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
+ if(i>=86400)
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i-86400;
+ else
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturChanPerfRxBlk;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturChanPerfRxBlk;
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayReceivedBlks=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturChanPerfTxBlk;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturChanPerfTxBlk;
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTransmittedBlks=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturChanPerfCorrBlk;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturChanPerfCorrBlk;
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayCorrectedBlks=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturChanPerfUncorrBlk;
+ i++;
+ if(i==96)
+ j=0;
+ }
+ j+=current_intvl->AturChanPerfUncorrBlk;
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayUncorrectBlks=j;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG)){
+ i=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ i++;
+ }
+ if(i>=96)
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=86400;
+ else
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturChanPerfRxBlk;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=j;
+ else
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturChanPerfTxBlk;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=j;
+ else
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturChanPerfCorrBlk;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=j;
+ else
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=0;
+ }
+ if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG)){
+ i=0;
+ j=0;
+ for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
+ mib_ptr = list_entry(ptr, amazon_mei_mib, list);
+ j+=mib_ptr->AturChanPerfUncorrBlk;
+ i++;
+ if(i==96)
+ break;
+ }
+ if(i==96)
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=j;
+ else
+ pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=0;
+ }
+
+ copy_to_user((char *)lon, (char *)pts.aturChannelPerfDataEntry_pt, sizeof(aturChannelPerfDataEntry));
+ kfree(pts.aturChannelPerfDataEntry_pt);
+ break;
+ case GET_ADSL_ATUC_CHAN_INTVL_INFO:
+ pts.adslAtucChanIntvlInfo_pt = (adslAtucChanIntvlInfo *)kmalloc(sizeof(adslAtucChanIntvlInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAtucChanIntvlInfo_pt, (char *)lon, sizeof(adslAtucChanIntvlInfo));
+
+ pts.adslAtucChanIntvlInfo_pt->flags = 0;
+
+ copy_to_user((char *)lon, (char *)pts.adslAtucChanIntvlInfo_pt, sizeof(adslAtucChanIntvlInfo));
+ kfree(pts.adslAtucChanIntvlInfo_pt);
+ break;
+ case GET_ADSL_ATUR_CHAN_INTVL_INFO:
+ pts.adslAturChanIntvlInfo_pt = (adslAturChanIntvlInfo *)kmalloc(sizeof(adslAturChanIntvlInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslAturChanIntvlInfo_pt, (char *)lon, sizeof(adslAturChanIntvlInfo));
+
+ if(pts.adslAturChanIntvlInfo_pt->IntervalNumber <1){
+ pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = ATUR_CHAN_RECV_BLK;
+ pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = ATUR_CHAN_TX_BLK;
+ pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = ATUR_CHAN_CORR_BLK;
+ pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = ATUR_CHAN_UNCORR_BLK;
+ pts.adslAturChanIntvlInfo_pt->intervalValidData = 1;
+ }
+ else{
+ i=0;
+ for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
+ i++;
+ if(i==pts.adslAturChanIntvlInfo_pt->IntervalNumber){
+ temp_intvl = list_entry(ptr, amazon_mei_mib, list);
+ pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = temp_intvl->AturChanPerfRxBlk;
+ pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = temp_intvl->AturChanPerfTxBlk;
+ pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = temp_intvl->AturChanPerfCorrBlk;
+ pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = temp_intvl->AturChanPerfUncorrBlk;
+ pts.adslAturChanIntvlInfo_pt->intervalValidData = 1;
+ break;
+ }
+ }
+ if(ptr==&interval_list){
+ pts.adslAturChanIntvlInfo_pt->intervalValidData = 0;
+ pts.adslAturChanIntvlInfo_pt->flags = 0;
+ }
+ }
+
+ copy_to_user((char *)lon, (char *)pts.adslAturChanIntvlInfo_pt, sizeof(adslAturChanIntvlInfo));
+ kfree(pts.adslAturChanIntvlInfo_pt);
+ break;
+ case GET_ADSL_ALRM_CONF_PROF:
+ pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry));
+
+ strncpy(pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, AlarmConfProfile.adslLineAlarmConfProfileName, 32);
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs=AlarmConfProfile.adslAtucThresh15MinLofs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss=AlarmConfProfile.adslAtucThresh15MinLoss;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs=AlarmConfProfile.adslAtucThresh15MinESs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp=AlarmConfProfile.adslAtucThreshFastRateUp;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp=AlarmConfProfile.adslAtucThreshInterleaveRateUp;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown=AlarmConfProfile.adslAtucThreshFastRateDown;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown=AlarmConfProfile.adslAtucThreshInterleaveRateDown;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable=AlarmConfProfile.adslAtucInitFailureTrapEnable;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs=AlarmConfProfile.adslAturThresh15MinLofs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss=AlarmConfProfile.adslAturThresh15MinLoss;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs=AlarmConfProfile.adslAturThresh15MinLprs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs=AlarmConfProfile.adslAturThresh15MinESs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp=AlarmConfProfile.adslAturThreshFastRateUp;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp=AlarmConfProfile.adslAturThreshInterleaveRateUp;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown=AlarmConfProfile.adslAturThreshFastRateDown;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown=AlarmConfProfile.adslAturThreshInterleaveRateDown;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){
+ pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus=AlarmConfProfile.adslLineAlarmConfProfileRowStatus;
+ }
+ copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry));
+ kfree(pts.adslLineAlarmConfProfileEntry_pt);
+ break;
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case GET_ADSL_ALRM_CONF_PROF_EXT:
+ pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry));
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){
+ pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){
+ pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL=AlarmConfProfileExt.adslAtucThreshold15MinSesL;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){
+ pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL=AlarmConfProfileExt.adslAtucThreshold15MinUasL;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){
+ pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL=AlarmConfProfileExt.adslAturThreshold15MinSesL;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){
+ pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL=AlarmConfProfileExt.adslAturThreshold15MinUasL;
+ }
+ copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry));
+ kfree(pts.adslLineAlarmConfProfileExtEntry_pt);
+ break;
+#endif
+ case SET_ADSL_ALRM_CONF_PROF:
+ pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry));
+
+ strncpy(AlarmConfProfile.adslLineAlarmConfProfileName, pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, 32);
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){
+ AlarmConfProfile.adslAtucThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){
+ AlarmConfProfile.adslAtucThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){
+ AlarmConfProfile.adslAtucThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){
+ AlarmConfProfile.adslAtucThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){
+ AlarmConfProfile.adslAtucThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){
+ AlarmConfProfile.adslAtucThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
+ AlarmConfProfile.adslAtucThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){
+ AlarmConfProfile.adslAtucInitFailureTrapEnable=pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){
+ AlarmConfProfile.adslAturThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){
+ AlarmConfProfile.adslAturThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){
+ AlarmConfProfile.adslAturThresh15MinLprs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){
+ AlarmConfProfile.adslAturThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){
+ AlarmConfProfile.adslAturThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){
+ AlarmConfProfile.adslAturThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){
+ AlarmConfProfile.adslAturThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
+ AlarmConfProfile.adslAturThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){
+ AlarmConfProfile.adslLineAlarmConfProfileRowStatus=pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus;
+ }
+ copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry));
+ kfree(pts.adslLineAlarmConfProfileEntry_pt);
+ break;
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case SET_ADSL_ALRM_CONF_PROF_EXT:
+ pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry));
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){
+ AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){
+ AlarmConfProfileExt.adslAtucThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){
+ AlarmConfProfileExt.adslAtucThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){
+ AlarmConfProfileExt.adslAturThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL;
+ }
+ if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){
+ AlarmConfProfileExt.adslAturThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL;
+ }
+ copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry));
+ kfree(pts.adslLineAlarmConfProfileExtEntry_pt);
+ break;
+#endif
+
+ case ADSL_ATUR_TRAPS:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ trapsflag=0;
+ if(AlarmConfProfile.adslAtucThresh15MinLofs!=0 && current_intvl->AtucPerfLof>=AlarmConfProfile.adslAtucThresh15MinLofs)
+ trapsflag|=ATUC_PERF_LOFS_THRESH_FLAG;
+ if(AlarmConfProfile.adslAtucThresh15MinLoss!=0 && current_intvl->AtucPerfLos>=AlarmConfProfile.adslAtucThresh15MinLoss)
+ trapsflag|=ATUC_PERF_LOSS_THRESH_FLAG;
+ if(AlarmConfProfile.adslAtucThresh15MinESs!=0 && current_intvl->AtucPerfEs>=AlarmConfProfile.adslAtucThresh15MinESs)
+ trapsflag|=ATUC_PERF_ESS_THRESH_FLAG;
+ if(chantype.fast==1){
+ if(AlarmConfProfile.adslAtucThreshFastRateUp!=0 || AlarmConfProfile.adslAtucThreshFastRateDown!=0){
+ ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 1 Index 0");
+#endif
+ }
+ else{
+ temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ if((AlarmConfProfile.adslAtucThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshFastRateUp)){
+ trapsflag|=ATUC_RATE_CHANGE_FLAG;
+ PrevTxRate.adslAtucChanPrevTxRate = temp;
+ }
+ if((AlarmConfProfile.adslAtucThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshFastRateDown)){
+ trapsflag|=ATUC_RATE_CHANGE_FLAG;
+ PrevTxRate.adslAtucChanPrevTxRate = temp;
+ }
+ }
+ }
+ }
+ if(chantype.interleave==1){
+ if(AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0){
+ ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 1 Index 0");
+#endif
+ }
+ else{
+ temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ if((AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshInterleaveRateUp)){
+ trapsflag|=ATUC_RATE_CHANGE_FLAG;
+ PrevTxRate.adslAtucChanPrevTxRate = temp;
+ }
+ if((AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshInterleaveRateDown)){
+ trapsflag|=ATUC_RATE_CHANGE_FLAG;
+ PrevTxRate.adslAtucChanPrevTxRate = temp;
+ }
+ }
+ }
+ }
+ if(AlarmConfProfile.adslAturThresh15MinLofs!=0 && current_intvl->AturPerfLof>=AlarmConfProfile.adslAturThresh15MinLofs)
+ trapsflag|=ATUR_PERF_LOFS_THRESH_FLAG;
+ if(AlarmConfProfile.adslAturThresh15MinLoss!=0 && current_intvl->AturPerfLos>=AlarmConfProfile.adslAturThresh15MinLoss)
+ trapsflag|=ATUR_PERF_LOSS_THRESH_FLAG;
+ if(AlarmConfProfile.adslAturThresh15MinLprs!=0 && current_intvl->AturPerfLpr>=AlarmConfProfile.adslAturThresh15MinLprs)
+ trapsflag|=ATUR_PERF_LPRS_THRESH_FLAG;
+ if(AlarmConfProfile.adslAturThresh15MinESs!=0 && current_intvl->AturPerfEs>=AlarmConfProfile.adslAturThresh15MinESs)
+ trapsflag|=ATUR_PERF_ESS_THRESH_FLAG;
+ if(chantype.fast==1){
+ if(AlarmConfProfile.adslAturThreshFastRateUp!=0 || AlarmConfProfile.adslAturThreshFastRateDown!=0){
+ ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 0 Index 0");
+#endif
+ }
+ else{
+ temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ if((AlarmConfProfile.adslAturThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshFastRateUp)){
+ trapsflag|=ATUR_RATE_CHANGE_FLAG;
+ PrevTxRate.adslAturChanPrevTxRate = temp;
+ }
+ if((AlarmConfProfile.adslAturThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshFastRateDown)){
+ trapsflag|=ATUR_RATE_CHANGE_FLAG;
+ PrevTxRate.adslAturChanPrevTxRate = temp;
+ }
+ }
+ }
+ }
+ if(chantype.interleave==1){
+ if(AlarmConfProfile.adslAturThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAturThreshInterleaveRateDown!=0){
+ ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 0 Index 0");
+#endif
+ }
+ else{
+ temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ if((AlarmConfProfile.adslAturThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshInterleaveRateUp)){
+ trapsflag|=ATUR_RATE_CHANGE_FLAG;
+ PrevTxRate.adslAturChanPrevTxRate = temp;
+ }
+ if((AlarmConfProfile.adslAturThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshInterleaveRateDown)){
+ trapsflag|=ATUR_RATE_CHANGE_FLAG;
+ PrevTxRate.adslAturChanPrevTxRate = temp;
+ }
+ }
+ }
+ }
+ copy_to_user((char *)lon, (char *)(&trapsflag), 2);
+
+ up(&mei_sema);
+ break;
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+ case ADSL_ATUR_EXT_TRAPS:
+ trapsflag=0;
+ if(AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR!=0 && current_intvl->AtucPerfStatFailedFastR>=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR)
+ trapsflag|=ATUC_15MIN_FAILED_FASTR_TRAP_FLAG;
+ if(AlarmConfProfileExt.adslAtucThreshold15MinSesL!=0 && current_intvl->AtucPerfStatSesL>=AlarmConfProfileExt.adslAtucThreshold15MinSesL)
+ trapsflag|=ATUC_15MIN_SESL_TRAP_FLAG;
+ if(AlarmConfProfileExt.adslAtucThreshold15MinUasL!=0 && current_intvl->AtucPerfStatUasL>=AlarmConfProfileExt.adslAtucThreshold15MinUasL)
+ trapsflag|=ATUC_15MIN_UASL_TRAP_FLAG;
+ if(AlarmConfProfileExt.adslAturThreshold15MinSesL!=0 && current_intvl->AturPerfStatSesL>=AlarmConfProfileExt.adslAturThreshold15MinSesL)
+ trapsflag|=ATUR_15MIN_SESL_TRAP_FLAG;
+ if(AlarmConfProfileExt.adslAturThreshold15MinUasL!=0 && current_intvl->AturPerfStatUasL>=AlarmConfProfileExt.adslAturThreshold15MinUasL)
+ trapsflag|=ATUR_15MIN_UASL_TRAP_FLAG;
+ copy_to_user((char *)lon, (char *)(&trapsflag), 2);
+ break;
+#endif
+
+// 603221:tc.chen start
+ case GET_ADSL_LINE_STATUS:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslLineStatusInfo_pt = (adslLineStatusInfo *)kmalloc(sizeof(adslLineStatusInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineStatusInfo_pt, (char *)lon, sizeof(adslLineStatusInfo));
+
+ if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODEM_STATUS_FLAG)){
+ LINE_STAT_MODEM_STATUS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group STAT Address 0 Index 0");
+#endif
+ pts.adslLineStatusInfo_pt->adslModemStatus = 0;
+ }
+ else{
+ pts.adslLineStatusInfo_pt->adslModemStatus = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODE_SEL_FLAG)){
+ LINE_STAT_MODE_SEL_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+ pts.adslLineStatusInfo_pt->adslModeSelected = 0;
+ }
+ else{
+ pts.adslLineStatusInfo_pt->adslModeSelected = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_TRELLCOD_ENABLE_FLAG)){
+ LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group OPTN Address 2 Index 0");
+#endif
+ pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = 0;
+ }
+ else{
+
+ pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = (RxMessage[4]>>13)&0x1==0x1?0:1;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_LATENCY_FLAG)){
+ LINE_STAT_LATENCY_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group STAT Address 12 Index 0");
+#endif
+ pts.adslLineStatusInfo_pt->adslLatency = 0;
+ }
+ else{
+ pts.adslLineStatusInfo_pt->adslLatency = RxMessage[4];
+ }
+ }
+
+ copy_to_user((char *)lon, (char *)pts.adslLineStatusInfo_pt, sizeof(adslLineStatusInfo));
+ kfree(pts.adslLineStatusInfo_pt);
+
+ up(&mei_sema);
+ break;
+
+
+ case GET_ADSL_LINE_RATE:
+ if (showtime!=1)
+ return -ERESTARTSYS;
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslLineRateInfo_pt = (adslLineRateInfo *)kmalloc(sizeof(adslLineRateInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineRateInfo_pt, (char *)lon, sizeof(adslLineRateInfo));
+
+ if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEDS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
+ {
+ if (chantype.interleave)
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV;
+ else
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV;
+
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group RATE Address 1 Index 0");
+#endif
+ pts.adslLineRateInfo_pt->adslDataRateds = 0;
+ }
+ else{
+ pts.adslLineRateInfo_pt->adslDataRateds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }else // adsl 2/2+
+ {
+ unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain;
+ Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0;
+ //// up stream data rate
+
+ if (chantype.interleave)
+ {
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 25 Index 0");
+#endif
+ Lp = 0;
+ }else
+ Lp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 23 Index 0");
+#endif
+ Rp = 0;
+ }else
+ Rp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 24 Index 0");
+#endif
+ Mp = 0;
+ }else
+ Mp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 26 Index 0");
+#endif
+ Tp = 0;
+ }else
+ Tp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 28 Index 0");
+#endif
+ Kp = 0;
+ }else
+ {
+ Kp=RxMessage[4]+ RxMessage[5]+1;
+ Bpn=RxMessage[4]+ RxMessage[5];
+ }
+ }else
+ {
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 25 Index 1");
+#endif
+ Lp = 0;
+ }else
+ Lp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 23 Index 1");
+#endif
+ Rp = 0;
+ }else
+ Rp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 24 Index 1");
+#endif
+ Mp = 0;
+ }else
+ Mp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 26 Index 1");
+#endif
+ Tp = 0;
+ }else
+ Tp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 28 Index 2");
+#endif
+ Kp = 0;
+ }else
+ {
+ Kp=RxMessage[4]+ RxMessage[5]+1;
+ Bpn=RxMessage[4]+ RxMessage[5];
+ }
+ }
+ DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp));
+ //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp));
+ //pts.adslLineRateInfo_pt->adslDataRateds = DataRate * 1000 + DataRate_remain;
+ pts.adslLineRateInfo_pt->adslDataRateds = DataRate;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEUS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
+ {
+ if (chantype.interleave)
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV;
+ else
+ LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV;
+
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+ #ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group RATE Address 0 Index 0");
+ #endif
+ pts.adslLineRateInfo_pt->adslDataRateus = 0;
+ }
+ else{
+ pts.adslLineRateInfo_pt->adslDataRateus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }else // adsl 2/2+
+ {
+ unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain;
+ Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0;
+ //// down stream data rate
+
+ if (chantype.interleave)
+ {
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 14 Index 0");
+#endif
+ Lp = 0;
+ }else
+ Lp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 12 Index 0");
+#endif
+ Rp = 0;
+ }else
+ Rp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 13 Index 0");
+#endif
+ Mp = 0;
+ }else
+ Mp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 15 Index 0");
+#endif
+ Tp = 0;
+ }else
+ Tp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 17 Index 0");
+#endif
+ Kp = 0;
+ }else
+ {
+ Kp=RxMessage[4]+ RxMessage[5]+1;
+ Bpn=RxMessage[4]+ RxMessage[5];
+ }
+ }else
+ {
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 14 Index 1");
+#endif
+ Lp = 0;
+ }else
+ Lp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 12 Index 1");
+#endif
+ Rp = 0;
+ }else
+ Rp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 13 Index 1");
+#endif
+ Mp = 0;
+ }else
+ Mp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 15 Index 1");
+#endif
+ Tp = 0;
+ }else
+ Tp=RxMessage[4];
+
+ LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 17 Index 2");
+#endif
+ Kp = 0;
+ }else
+ {
+ Kp=RxMessage[4]+ RxMessage[5]+1;
+ Bpn=RxMessage[4]+ RxMessage[5];
+ }
+ }
+ DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp));
+ //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp));
+ //pts.adslLineRateInfo_pt->adslDataRateus = DataRate * 1000 + DataRate_remain;
+ pts.adslLineRateInfo_pt->adslDataRateus = DataRate;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRDS_FLAG)){
+ LINE_RATE_ATTNDRDS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 68 Index 4");
+#endif
+ pts.adslLineRateInfo_pt->adslATTNDRds = 0;
+ }
+ else{
+ pts.adslLineRateInfo_pt->adslATTNDRds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRUS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
+ {
+ LINE_RATE_ATTNDRUS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+ #ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 69 Index 4");
+ #endif
+ pts.adslLineRateInfo_pt->adslATTNDRus = 0;
+ }
+ else{
+ pts.adslLineRateInfo_pt->adslATTNDRus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }else
+ {
+ hdlc_cmd[0]=0x0181;
+ hdlc_cmd[1]=0x24;
+ up(&mei_sema);
+ if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ hdlc_rx_len=0;
+ hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
+ if (hdlc_rx_len <=0)
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_RATE_END;
+ }
+ pts.adslLineRateInfo_pt->adslATTNDRus = (u32)le16_to_cpu(hdlc_rx_buffer[1])<<16 | (u32)le16_to_cpu(hdlc_rx_buffer[2]);
+ }
+ if(down_interruptible(&mei_sema))
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_RATE_END;
+ }
+ }
+ }
+ copy_to_user((char *)lon, (char *)pts.adslLineRateInfo_pt, sizeof(adslLineRateInfo));
+ up(&mei_sema);
+
+GET_ADSL_LINE_RATE_END:
+ kfree(pts.adslLineRateInfo_pt);
+ break;
+
+ case GET_ADSL_LINE_INFO:
+ if (showtime!=1)
+ return -ERESTARTSYS;
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslLineInfo_pt = (adslLineInfo *)kmalloc(sizeof(adslLineInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslLineInfo_pt, (char *)lon, sizeof(adslLineInfo));
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHDS_FLAG)){
+ if (chantype.interleave)
+ LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV;
+ else
+ LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV;
+
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 27 Index 0");
+#endif
+ pts.adslLineInfo_pt->adslInterleaveDepthds = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslInterleaveDepthds = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHUS_FLAG)){
+ if (chantype.interleave)
+ LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV;
+ else
+ LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV;
+
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group CNFG Address 16 Index 0");
+#endif
+ pts.adslLineInfo_pt->adslInterleaveDepthus = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslInterleaveDepthus = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNDS_FLAG)){
+ LINE_INFO_LATNDS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 68 Index 1");
+#endif
+ pts.adslLineInfo_pt->adslLATNds = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslLATNds = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNUS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
+ {
+ LINE_INFO_LATNUS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 69 Index 1");
+#endif
+ pts.adslLineInfo_pt->adslLATNus = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslLATNus = RxMessage[4];
+ }
+ }else
+ {
+ hdlc_cmd[0]=0x0181;
+ hdlc_cmd[1]=0x21;
+ up(&mei_sema);
+ if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ hdlc_rx_len=0;
+ hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
+ if (hdlc_rx_len <=0)
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ pts.adslLineInfo_pt->adslLATNus = le16_to_cpu(hdlc_rx_buffer[1]);
+ }
+ if(down_interruptible(&mei_sema))
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNDS_FLAG)){
+ LINE_INFO_SATNDS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 68 Index 2");
+#endif
+ pts.adslLineInfo_pt->adslSATNds = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslSATNds = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNUS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
+ {
+ LINE_INFO_SATNUS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 69 Index 2");
+#endif
+ pts.adslLineInfo_pt->adslSATNus = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslSATNus = RxMessage[4];
+ }
+ }else
+ {
+ hdlc_cmd[0]=0x0181;
+ hdlc_cmd[1]=0x22;
+ up(&mei_sema);
+ if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ hdlc_rx_len=0;
+ hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
+ if (hdlc_rx_len <=0)
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ pts.adslLineInfo_pt->adslSATNus = le16_to_cpu(hdlc_rx_buffer[1]);
+ }
+ if(down_interruptible(&mei_sema))
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNDS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
+ {
+ LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV;
+ }
+ else if ((adsl_mode == 0x4000) || (adsl_mode == 0x8000) || adsl_mode_extend > 0)
+ {
+ LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV;
+ }
+ else
+ {
+ LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV;
+ }
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 68 Index 3");
+#endif
+ pts.adslLineInfo_pt->adslSNRMds = 0;
+ }
+ else{
+ if (adsl_mode>8 || adsl_mode_extend>0)
+ {
+ int SNRMds,SNRMds_remain;
+ SNRMds=RxMessage[4];
+ SNRMds_remain=((SNRMds&0xff)*1000)/256;
+ SNRMds=(SNRMds>>8)&0xff;
+ if ((SNRMds_remain%100)>=50) SNRMds_remain=(SNRMds_remain/100)+1;
+ else SNRMds_remain=(SNRMds_remain/100);
+ pts.adslLineInfo_pt->adslSNRMds = SNRMds*10 + SNRMds_remain;
+ }else
+ {
+ pts.adslLineInfo_pt->adslSNRMds = RxMessage[4];
+ }
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNUS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend == 0)
+ {
+ LINE_INFO_SNRMNUS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 69 Index 3");
+#endif
+ pts.adslLineInfo_pt->adslSNRMus = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslSNRMus = RxMessage[4];
+ }
+ }else
+ {
+ hdlc_cmd[0]=0x0181;
+ hdlc_cmd[1]=0x23;
+ up(&mei_sema);
+ if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ hdlc_rx_len=0;
+ hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
+ if (hdlc_rx_len <=0)
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ pts.adslLineInfo_pt->adslSNRMus = le16_to_cpu(hdlc_rx_buffer[1]);
+ }
+ if(down_interruptible(&mei_sema))
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPDS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend == 0)
+ {
+ LINE_INFO_ACATPDS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+ #ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 68 Index 6");
+ #endif
+ pts.adslLineInfo_pt->adslACATPds = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslACATPds = RxMessage[4];
+ }
+ }else
+ {
+ hdlc_cmd[0]=0x0181;
+ hdlc_cmd[1]=0x25;
+ up(&mei_sema);
+ if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ hdlc_rx_len=0;
+ hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
+ if (hdlc_rx_len <=0)
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ pts.adslLineInfo_pt->adslACATPds = le16_to_cpu(hdlc_rx_buffer[1]);
+ }
+ if(down_interruptible(&mei_sema))
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPUS_FLAG)){
+ if (adsl_mode <=8 && adsl_mode_extend == 0)
+ {
+ LINE_INFO_ACATPUS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 69 Index 6");
+#endif
+ pts.adslLineInfo_pt->adslACATPus = 0;
+ }
+ else{
+ pts.adslLineInfo_pt->adslACATPus = RxMessage[4];
+ }
+ }else
+ {
+ hdlc_cmd[0]=0x0181;
+ hdlc_cmd[1]=0x26;
+ up(&mei_sema);
+ if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ hdlc_rx_len=0;
+ hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
+ if (hdlc_rx_len <=0)
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ pts.adslLineInfo_pt->adslACATPus = le16_to_cpu(hdlc_rx_buffer[1]);
+ }
+ if(down_interruptible(&mei_sema))
+ {
+ meierr = -ERESTARTSYS;
+ goto GET_ADSL_LINE_INFO_END;
+ }
+ }
+ }
+
+ copy_to_user((char *)lon, (char *)pts.adslLineInfo_pt, sizeof(adslLineInfo));
+ up(&mei_sema);
+
+GET_ADSL_LINE_INFO_END:
+ kfree(pts.adslLineInfo_pt);
+ break;
+
+ case GET_ADSL_NEAREND_STATS:
+ if (showtime!=1)
+ return -ERESTARTSYS;
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslNearEndPerfStats_pt = (adslNearEndPerfStats *)kmalloc(sizeof(adslNearEndPerfStats), GFP_KERNEL);
+ copy_from_user((char *)pts.adslNearEndPerfStats_pt, (char *)lon, sizeof(adslNearEndPerfStats));
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SUPERFRAME_FLAG)){
+ NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 20 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslSuperFrames = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslSuperFrames = (u32)(RxMessage[4]);
+ }
+ NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 21 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslSuperFrames = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslSuperFrames += (((u32)(RxMessage[4]))<<16);
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG) ||
+ IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG) ||
+ IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG) ||
+ IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG) ||
+ IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG) ){
+ NEAREND_PERF_LOS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 0 Index 0");
+#endif
+ RxMessage[4] = 0;
+ }
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG)){
+ if( (RxMessage[4]&0x1) == 0x1)
+ pts.adslNearEndPerfStats_pt->adslneLOS = 1;
+ else
+ pts.adslNearEndPerfStats_pt->adslneLOS = 0;
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG)){
+ if( (RxMessage[4]&0x2) == 0x2)
+ pts.adslNearEndPerfStats_pt->adslneLOF = 1;
+ else
+ pts.adslNearEndPerfStats_pt->adslneLOF = 0;
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG)){
+ if( (RxMessage[4]&0x4) == 0x4)
+ pts.adslNearEndPerfStats_pt->adslneLPR = 1;
+ else
+ pts.adslNearEndPerfStats_pt->adslneLPR = 0;
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG)){
+ pts.adslNearEndPerfStats_pt->adslneNCD = (RxMessage[4]>>4)&0x3;
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG)){
+ pts.adslNearEndPerfStats_pt->adslneLCD = (RxMessage[4]>>6)&0x3;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_CRC_FLAG)){
+ if (chantype.interleave)
+ NEAREND_PERF_CRC_FLAG_LP0_MAKECMV;
+ else
+ NEAREND_PERF_CRC_FLAG_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 2 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslneCRC = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslneCRC = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_RSCORR_FLAG)){
+ if (chantype.interleave)
+ NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV;
+ else
+ NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV;
+
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 3 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslneRSCorr = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslneRSCorr = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_FECS_FLAG)){
+ NEAREND_PERF_FECS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 6 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslneFECS = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslneFECS = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_ES_FLAG)){
+ NEAREND_PERF_ES_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 7 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslneES = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslneES = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SES_FLAG)){
+ NEAREND_PERF_SES_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 8 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslneSES = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslneSES = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOSS_FLAG)){
+ NEAREND_PERF_LOSS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 9 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslneLOSS = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslneLOSS = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_UAS_FLAG)){
+ NEAREND_PERF_UAS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 10 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslneUAS = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslneUAS = RxMessage[4];
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_HECERR_FLAG)){
+ if (chantype.bearchannel0)
+ {
+ NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV;
+ }else if (chantype.bearchannel1)
+ {
+ NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV;
+ }
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 11 Index 0");
+#endif
+ pts.adslNearEndPerfStats_pt->adslneHECErrors = 0;
+ }
+ else{
+ pts.adslNearEndPerfStats_pt->adslneHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }
+
+ copy_to_user((char *)lon, (char *)pts.adslNearEndPerfStats_pt, sizeof(adslNearEndPerfStats));
+ kfree(pts.adslNearEndPerfStats_pt);
+
+ up(&mei_sema);
+ break;
+
+ case GET_ADSL_FAREND_STATS:
+
+ if (showtime!=1)
+ return -ERESTARTSYS;
+
+ if (adsl_mode>8 || adsl_mode_extend > 0)
+ {
+ do_gettimeofday(&time_now);
+ if( FarendData_acquire_time.tv_sec==0 || time_now.tv_sec - FarendData_acquire_time.tv_sec>=1)
+ {
+ hdlc_cmd[0]=0x105;
+
+ if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],2)!= -EBUSY)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ hdlc_rx_len=0;
+ hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
+ if (hdlc_rx_len <=0)
+ {
+ return -ERESTARTSYS;
+ }
+ FarendStatsData.adslfeRSCorr = ((u32)le16_to_cpu(hdlc_rx_buffer[1]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[2]);
+ FarendStatsData.adslfeCRC = ((u32)le16_to_cpu(hdlc_rx_buffer[3]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[4]);
+ FarendStatsData.adslfeFECS = ((u32)le16_to_cpu(hdlc_rx_buffer[5]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[6]);
+ FarendStatsData.adslfeES = ((u32)le16_to_cpu(hdlc_rx_buffer[7]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[8]);
+ FarendStatsData.adslfeSES = ((u32)le16_to_cpu(hdlc_rx_buffer[9]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[10]);
+ FarendStatsData.adslfeLOSS = ((u32)le16_to_cpu(hdlc_rx_buffer[11]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[12]);
+ FarendStatsData.adslfeUAS = ((u32)le16_to_cpu(hdlc_rx_buffer[13]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[14]);
+ do_gettimeofday(&FarendData_acquire_time);
+ }
+
+ }
+ }
+
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+ pts.adslFarEndPerfStats_pt = (adslFarEndPerfStats *)kmalloc(sizeof(adslFarEndPerfStats), GFP_KERNEL);
+ copy_from_user((char *)pts.adslFarEndPerfStats_pt, (char *)lon, sizeof(adslFarEndPerfStats));
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG) ||
+ IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG) ||
+ IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG) ||
+ IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG) ||
+ IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG) ){
+ FAREND_PERF_LOS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 1 Index 0");
+#endif
+ RxMessage[4] = 0;
+ }
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG)){
+ if((RxMessage[4]&0x1) == 0x1)
+ pts.adslFarEndPerfStats_pt->adslfeLOS = 1;
+ else
+ pts.adslFarEndPerfStats_pt->adslfeLOS = 0;
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG)){
+ if((RxMessage[4]&0x2) == 0x2)
+ pts.adslFarEndPerfStats_pt->adslfeLOF = 1;
+ else
+ pts.adslFarEndPerfStats_pt->adslfeLOF = 0;
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG)){
+ if((RxMessage[4]&0x4) == 0x4)
+ pts.adslFarEndPerfStats_pt->adslfeLPR = 1;
+ else
+ pts.adslFarEndPerfStats_pt->adslfeLPR = 0;
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG)){
+ pts.adslFarEndPerfStats_pt->adslfeNCD = (RxMessage[4]>>4)&0x3;
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG)){
+ pts.adslFarEndPerfStats_pt->adslfeLCD = (RxMessage[4]>>6)&0x3;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_CRC_FLAG)){
+ if (adsl_mode<=8 && adsl_mode_extend == 0)
+ {
+ if (chantype.interleave)
+ {
+ FAREND_PERF_CRC_FLAG_LP0_MAKECMV;
+ }
+ else
+ {
+ FAREND_PERF_CRC_FLAG_LP1_MAKECMV;
+ }
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 24 Index 0");
+#endif
+ pts.adslFarEndPerfStats_pt->adslfeCRC = 0;
+ }
+ else{
+ pts.adslFarEndPerfStats_pt->adslfeCRC = RxMessage[4];
+ }
+ }else
+ {
+ pts.adslFarEndPerfStats_pt->adslfeCRC = FarendStatsData.adslfeCRC;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_RSCORR_FLAG)){
+ if (adsl_mode<=8 && adsl_mode_extend == 0)
+ {
+ if (chantype.interleave)
+ FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV;
+ else
+ FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 28 Index 0");
+#endif
+ pts.adslFarEndPerfStats_pt->adslfeRSCorr = 0;
+ }
+ else{
+ pts.adslFarEndPerfStats_pt->adslfeRSCorr = RxMessage[4];
+
+ }
+ }
+ else
+ {
+ pts.adslFarEndPerfStats_pt->adslfeRSCorr = FarendStatsData.adslfeRSCorr;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_FECS_FLAG)){
+ if (adsl_mode<=8 && adsl_mode_extend == 0)
+ {
+ FAREND_PERF_FECS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 32 Index 0");
+#endif
+ pts.adslFarEndPerfStats_pt->adslfeFECS = 0;
+ }
+ else{
+ pts.adslFarEndPerfStats_pt->adslfeFECS = RxMessage[4];
+ }
+ }else {
+ pts.adslFarEndPerfStats_pt->adslfeFECS = FarendStatsData.adslfeFECS;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_ES_FLAG)){
+ if (adsl_mode<=8 && adsl_mode_extend == 0)
+ {
+ FAREND_PERF_ES_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 33 Index 0");
+#endif
+ pts.adslFarEndPerfStats_pt->adslfeES = 0;
+ }
+ else{
+ pts.adslFarEndPerfStats_pt->adslfeES = RxMessage[4];
+ }
+ }else
+ {
+ pts.adslFarEndPerfStats_pt->adslfeES = FarendStatsData.adslfeES;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_SES_FLAG)){
+ if (adsl_mode<=8 && adsl_mode_extend == 0)
+ {
+ FAREND_PERF_SES_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 34 Index 0");
+#endif
+ pts.adslFarEndPerfStats_pt->adslfeSES = 0;
+ }
+ else{
+ pts.adslFarEndPerfStats_pt->adslfeSES = RxMessage[4];
+
+ }
+ }else
+ {
+ pts.adslFarEndPerfStats_pt->adslfeSES = FarendStatsData.adslfeSES;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOSS_FLAG)){
+ if (adsl_mode<=8 && adsl_mode_extend == 0)
+ {
+ FAREND_PERF_LOSS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ pts.adslFarEndPerfStats_pt->adslfeLOSS = 0;
+ }
+ else{
+ pts.adslFarEndPerfStats_pt->adslfeLOSS = RxMessage[4];
+
+ }
+ }else
+ {
+ pts.adslFarEndPerfStats_pt->adslfeLOSS = FarendStatsData.adslfeLOSS;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_UAS_FLAG)){
+ if (adsl_mode<=8 && adsl_mode_extend == 0)
+ {
+ FAREND_PERF_UAS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 36 Index 0");
+#endif
+ pts.adslFarEndPerfStats_pt->adslfeUAS = 0;
+ }
+ else{
+ pts.adslFarEndPerfStats_pt->adslfeUAS = RxMessage[4];
+
+ }
+ }else
+ {
+ pts.adslFarEndPerfStats_pt->adslfeUAS = FarendStatsData.adslfeUAS;
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_HECERR_FLAG)){
+ if (chantype.bearchannel0)
+ {
+ FAREND_PERF_HECERR_FLAG_BC0_MAKECMV;
+ }else if (chantype.bearchannel1)
+ {
+ FAREND_PERF_HECERR_FLAG_BC1_MAKECMV;
+ }
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 37 Index 0");
+#endif
+ pts.adslFarEndPerfStats_pt->adslfeHECErrors = 0;
+ }
+ else{
+ pts.adslFarEndPerfStats_pt->adslfeHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ }
+
+ copy_to_user((char *)lon, (char *)pts.adslFarEndPerfStats_pt, sizeof(adslFarEndPerfStats));
+ kfree(pts.adslFarEndPerfStats_pt);
+
+ up(&mei_sema);
+
+ break;
+// 603221:tc.chen end
+ case GET_ADSL_LOOP_DIAGNOSTICS_MODE:
+ //lon = loop_diagnostics_mode;
+ copy_to_user((char *)lon, (char *)&loop_diagnostics_mode, sizeof(int));
+ break;
+//>> SHC
+ case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE:
+ copy_to_user((char *)lon, (char *)&loop_diagnostics_completed, sizeof(int));
+ break;
+
+//<< end SHC
+ case LOOP_DIAGNOSTIC_MODE_COMPLETE:
+ loop_diagnostics_completed = 1;
+ // read adsl mode
+ makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+ }
+ adsl_mode = RxMessage[4];
+
+ makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+ }
+ adsl_mode_extend = RxMessage[4];
+ wake_up_interruptible(&wait_queue_loop_diagnostic);
+ break;
+ case SET_ADSL_LOOP_DIAGNOSTICS_MODE:
+ if (lon != loop_diagnostics_mode)
+ {
+ loop_diagnostics_completed = 0;
+ loop_diagnostics_mode = lon;
+
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_REBOOT, NULL);
+
+ }
+ break;
+ case GET_ADSL_ATUR_SUBCARRIER_STATS:
+ if (loop_diagnostics_completed == 0)
+ {
+ interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ);
+ if (loop_diagnostics_completed==0)
+ {
+ return -ERESTARTSYS;
+ }
+ }
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ pts.adslATURSubcarrierInfo_pt = (adslATURSubcarrierInfo *)kmalloc(sizeof(adslATURSubcarrierInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslATURSubcarrierInfo_pt, (char *)lon, sizeof(adslATURSubcarrierInfo));
+
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINSC)){
+ FAREND_HLINSC_MAKECMV(H2D_CMV_READ);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ pts.adslATURSubcarrierInfo_pt->HLINSCds = 0;
+ }
+ else{
+ pts.adslATURSubcarrierInfo_pt->HLINSCds = RxMessage[4];
+
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINPS)){
+ int index=0,size=12;
+ //printk("FAREND_HLINPS\n");
+ for (index=0;index<1024;index+=size)
+ {
+ if (index+size>=1024)
+ size = 1024-index;
+ FAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ }
+ else{
+ memcpy(&pts.adslATURSubcarrierInfo_pt->HLINpsds[index],&RxMessage[4],size*2);
+#if 0
+ int msg_idx;
+ for(msg_idx=0;msg_idx<size;msg_idx++)
+ printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+#endif
+ }
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLOGMT)){
+ FAREND_HLOGMT_MAKECMV(H2D_CMV_READ);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ pts.adslATURSubcarrierInfo_pt->HLOGMTds = 0;
+ }
+ else{
+ pts.adslATURSubcarrierInfo_pt->HLOGMTds = RxMessage[4];
+
+ }
+ }
+
+ /////////////////////////////////////////////////////////////////////////
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLOGPS)){
+ //printk("FAREND_HLOGPS\n");
+ int index=0,size=12;
+ for (index=0;index<256;index+=size)
+ {
+ if (index+size>=256)
+ size = 256-index;
+
+ FAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ }
+ else{
+ if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
+ {
+ memcpy(&pts.adslATURSubcarrierInfo_pt->HLOGpsds[index],&RxMessage[4],size*2);
+ }else
+ {
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index+msg_idx)*2+1] = RxMessage[4+msg_idx];
+ //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+ }
+ }
+ }
+ }
+ if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode
+ {
+ pts.adslATURSubcarrierInfo_pt->HLOGpsds[0] = pts.adslATURSubcarrierInfo_pt->HLOGpsds[1];
+ for (index=1;index<256;index++)
+ {
+ pts.adslATURSubcarrierInfo_pt->HLOGpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2+1] +1) >>1;
+ }
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNMT)){
+ FAREND_QLNMT_MAKECMV(H2D_CMV_READ);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ pts.adslATURSubcarrierInfo_pt->QLNMTds = 0;
+ }
+ else{
+ pts.adslATURSubcarrierInfo_pt->QLNMTds = RxMessage[4];
+ }
+ }
+
+ /////////////////////////////////////////////////////////////////////////
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNPS)){
+ int index=0,size=12;
+ //printk("FAREND_QLNPS\n");
+ for (index=0;index<128;index+=size)
+ {
+ if (index+size>=128)
+ size = 128-index;
+ FAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ }
+ else{
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ //memcpy(&pts.adslATURSubcarrierInfo_pt->QLNpsds[index],&RxMessage[4],size*2);
+ if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
+ {
+ pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
+ pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
+ }else
+ {
+ pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF);
+ pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
+ //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+ }
+ }
+
+
+ }
+ }
+ if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode
+ {
+ pts.adslATURSubcarrierInfo_pt->QLNpsds[0] = pts.adslATURSubcarrierInfo_pt->QLNpsds[1];
+ for (index=1;index<256;index++)
+ {
+ pts.adslATURSubcarrierInfo_pt->QLNpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2+1]) >>1;
+ }
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRMT)){
+ FAREND_SNRMT_MAKECMV(H2D_CMV_READ);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ pts.adslATURSubcarrierInfo_pt->SNRMTds = 0;
+ }
+ else{
+ pts.adslATURSubcarrierInfo_pt->SNRMTds = RxMessage[4];
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRPS)){
+ int index=0,size=12;
+ //printk("FAREND_SNRPS\n");
+ for (index=0;index<512;index+=size)
+ {
+ if (index+size>=512)
+ size = 512-index;
+ FAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ }
+ else{
+ //memcpy(&pts.adslATURSubcarrierInfo_pt->SNRpsds[index],&RxMessage[4],size*2);
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ pts.adslATURSubcarrierInfo_pt->SNRpsds[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF);
+ //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+ }
+
+ }
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_BITPS)){
+ int index=0,size=12;
+ //printk("FAREND_BITPS\n");
+ for (index=0;index<256;index+=size)
+ {
+ if (index+size>=256)
+ size = 256-index;
+ FAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ }
+ else{
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
+ pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
+ //printk("index:%d ,cmv_result: %04X, %d\n",index+msg_idx,RxMessage[4+msg_idx],RxMessage[4+msg_idx]);
+
+ }
+
+ }
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_GAINPS)){
+ int index=0,size=12;
+ //printk("FAREND_GAINPS\n");
+ for (index=0;index<512;index+=size)
+ {
+ FAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ }
+ else{
+ /*
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF;
+ pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF;
+
+ }
+ */
+ memcpy(&pts.adslATURSubcarrierInfo_pt->GAINpsds[index],&RxMessage[4],size*2);
+#if 0
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+
+ }
+#endif
+ }
+ }
+ }
+ copy_to_user((char *)lon, (char *)pts.adslATURSubcarrierInfo_pt, sizeof(adslATURSubcarrierInfo));
+ kfree(pts.adslATURSubcarrierInfo_pt);
+
+ up(&mei_sema);
+ break;
+ case GET_ADSL_ATUC_SUBCARRIER_STATS:
+ if (loop_diagnostics_completed == 0)
+ {
+ interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ);
+ if (loop_diagnostics_completed==0)
+ {
+ return -ERESTARTSYS;
+ }
+ }
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+ pts.adslATUCSubcarrierInfo_pt = (adslATUCSubcarrierInfo *)kmalloc(sizeof(adslATUCSubcarrierInfo), GFP_KERNEL);
+ copy_from_user((char *)pts.adslATUCSubcarrierInfo_pt, (char *)lon, sizeof(adslATUCSubcarrierInfo));
+
+
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLINSC)){
+ NEAREND_HLINSC_MAKECMV(H2D_CMV_READ);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 71 Index 2");
+#endif
+ pts.adslATUCSubcarrierInfo_pt->HLINSCus = 0;
+ }
+ else{
+ pts.adslATUCSubcarrierInfo_pt->HLINSCus = RxMessage[4];
+
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLINPS)){
+ int index=0,size=12;
+ //printk("NEAREND_HLINPS\n");
+ for (index=0;index<128;index+=size)
+ {
+ if (index+size>=128)
+ size = 128-index;
+ NEAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 73 Index 0");
+#endif
+ }
+ else{
+ memcpy(&pts.adslATUCSubcarrierInfo_pt->HLINpsus[index],&RxMessage[4],size*2);
+#if 0
+ int msg_idx;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+ }
+#endif
+ }
+ }
+ }
+
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLOGMT)){
+ NEAREND_HLOGMT_MAKECMV(H2D_CMV_READ);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 80 Index 0");
+#endif
+ pts.adslATUCSubcarrierInfo_pt->HLOGMTus = 0;
+ }
+ else{
+ pts.adslATUCSubcarrierInfo_pt->HLOGMTus = RxMessage[4];
+
+ }
+ }
+
+ /////////////////////////////////////////////////////////////////////////
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLOGPS)){
+ int index=0,size=12;
+ //printk("NEAREND_HLOGPS\n");
+ for (index=0;index<64;index+=size)
+ {
+ if (index+size>=64)
+ size = 64-index;
+ NEAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 75 Index 0");
+#endif
+ }
+ else{
+#if 0
+ if (adsl_mode <0x4000)//adsl /adsl2 mode
+ {
+#endif
+ memcpy(&pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index],&RxMessage[4],size*2);
+#if 0
+ }else
+ {
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ //pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)*2+1] = RxMessage[4+msg_idx];
+ pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)] = RxMessage[4+msg_idx];
+ }
+ }
+#endif
+ }
+ }
+#if 0
+ if (adsl_mode >= 0x4000)//adsl2 mode
+ {
+ pts.adslATUCSubcarrierInfo_pt->HLOGpsus[0] = pts.adslATUCSubcarrierInfo_pt->HLOGpsus[1];
+ for (index=1;index<64;index++)
+ {
+ pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2+1]) >>1;
+ }
+ }
+#endif
+ }
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNMT)){
+ NEAREND_QLNMT_MAKECMV(H2D_CMV_READ);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 80 Index 1");
+#endif
+ pts.adslATUCSubcarrierInfo_pt->QLNMTus = 0;
+ }
+ else{
+ pts.adslATUCSubcarrierInfo_pt->QLNMTus = RxMessage[4];
+ }
+ }
+
+ /////////////////////////////////////////////////////////////////////////
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNPS)){
+ int index=0,size=12;
+ //printk("NEAREND_QLNPS\n");
+ for (index=0;index<32;index+=size)
+ {
+ if (index+size>=32)
+ size = 32-index;
+ NEAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 77 Index 0");
+#endif
+ }
+ else{
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+
+#if 0
+ //memcpy(&pts.adslATUCSubcarrierInfo_pt->QLNpsds[index],&RxMessage[4],size*2);
+ if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M
+ if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
+ {
+ pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF);
+ pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
+ }else
+#endif
+ {
+ pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
+ pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
+ //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+ }
+ }
+
+
+ }
+ }
+#if 0
+ //if (adsl_mode <0x4000)//Annex I/J/L/M
+ if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M
+ {
+ pts.adslATUCSubcarrierInfo_pt->QLNpsus[0] = pts.adslATUCSubcarrierInfo_pt->QLNpsus[1];
+ for (index=1;index<64;index++)
+ {
+ pts.adslATUCSubcarrierInfo_pt->QLNpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2+1]) >>1;
+ }
+ }
+#endif
+ }
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRMT)){
+ NEAREND_SNRMT_MAKECMV(H2D_CMV_READ);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 80 Index 2");
+#endif
+ pts.adslATUCSubcarrierInfo_pt->SNRMTus = 0;
+ }
+ else{
+ pts.adslATUCSubcarrierInfo_pt->SNRMTus = RxMessage[4];
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRPS)){
+ int index=0,size=12;
+ //printk("NEAREND_SNRPS\n");
+ for (index=0;index<64;index+=size)
+ {
+ if (index+size>=64)
+ size = 64-index;
+ NEAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 78 Index 0");
+#endif
+ }
+ else{
+ //memcpy(&pts.adslATUCSubcarrierInfo_pt->SNRpsus[index],&RxMessage[4],size*2);
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ pts.adslATUCSubcarrierInfo_pt->SNRpsus[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF);
+ //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+ }
+
+ }
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_BITPS)){
+ int index=0,size=12;
+ //printk("NEAREND_BITPS\n");
+ for (index=0;index<32;index+=size)
+ {
+ if (index+size>=32)
+ size = 32-index;
+ NEAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 22 Index 0");
+#endif
+ }
+ else{
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
+ pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
+ //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+ }
+
+ }
+ }
+ }
+ if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_GAINPS)){
+ int index=0,size=12;
+ //printk("NEAREND_GAINPS\n");
+ for (index=0;index<64;index+=size)
+ {
+ if (index+size>=64)
+ size = 64-index;
+ NEAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group INFO Address 24 Index 0");
+#endif
+ }
+ else{
+ /*
+ int msg_idx=0;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF;
+ pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF;
+
+ }
+ */
+ memcpy(&pts.adslATUCSubcarrierInfo_pt->GAINpsus[index],&RxMessage[4],size*2);
+#if 0
+ int msg_idx;
+ for (msg_idx=0;msg_idx<size;msg_idx++)
+ {
+ printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
+ }
+#endif
+ }
+ }
+ }
+ copy_to_user((char *)lon, (char *)pts.adslATUCSubcarrierInfo_pt, sizeof(adslATUCSubcarrierInfo));
+ kfree(pts.adslATUCSubcarrierInfo_pt);
+ up(&mei_sema);
+ break;
+ case GET_ADSL_LINE_INIT_STATS:
+ copy_to_user((char *)lon, (char *)&AdslInitStatsData, sizeof(AdslInitStatsData));
+ break;
+
+ case GET_ADSL_POWER_SPECTRAL_DENSITY:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+ i=0;
+ pts.adslPowerSpectralDensity_pt = (adslPowerSpectralDensity *)kmalloc(sizeof(adslPowerSpectralDensity), GFP_KERNEL);
+ memset((char *)pts.adslPowerSpectralDensity_pt, 0, sizeof(adslPowerSpectralDensity));
+
+ //US
+ NOMPSD_US_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ i=-1;
+ }
+ else{
+ j=RxMessage[4];
+ }
+ PCB_US_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ i=-1;
+ }
+ else{
+ temp=RxMessage[4];
+ }
+ RMSGI_US_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ i=-1;
+ }
+ else{
+ k=(int16_t)RxMessage[4];
+ }
+ if (i==0)
+ {
+ pts.adslPowerSpectralDensity_pt->ACTPSDus = ((int )(j*256 - temp*10*256 + k*10)) /256;
+ }
+ // DS
+ i=0;
+ j=temp=temp2=0;
+ NOMPSD_DS_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ i=-1;
+ }
+ else{
+ j=RxMessage[4];
+ }
+ PCB_DS_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ i=-1;
+ }
+ else{
+ temp=RxMessage[4];
+ }
+ RMSGI_DS_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
+#endif
+ i=-1;
+ }
+ else{
+ //temp2=RxMessage[4];
+ k=(int16_t)RxMessage[4];
+ }
+ if (i==0)
+ {
+ pts.adslPowerSpectralDensity_pt->ACTPSDds = ((int )(j*256 - temp*10*256 + k*10)) /256;
+ }
+ copy_to_user((char *)lon, (char *)pts.adslPowerSpectralDensity_pt, sizeof(adslPowerSpectralDensity));
+ kfree(pts.adslPowerSpectralDensity_pt);
+ up(&mei_sema);
+ break;
+ case AMAZON_MEI_START:
+ showtime=0;
+ loop_diagnostics_completed = 0;
+#ifdef ARC_READY_ACK
+#ifdef LOCK_RETRY
+ i=0;
+lock_retry:
+ if(down_trylock(&mei_sema)!=0)
+ {
+ reboot_lock = 1;
+ printk("lock fail\n");
+ i++;
+ if (i <=5)
+ {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(10);
+ goto lock_retry;
+ }else
+ {
+ printk("Force to Reboot ADSL!\n");
+ up(&mei_sema);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1000);
+ sema_init(&mei_sema, 1); // semaphore initialization, mutex
+ }
+ }else
+ {
+ reboot_lock = 1;
+ }
+#else
+ if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready
+ {
+ return -ERESTARTSYS;
+ }
+#endif
+#endif
+ //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
+ if(chantype.interleave==1){
+ kfree(interleave_mei_net.priv);
+ unregister_netdev(&interleave_mei_net);
+ }
+ else if(chantype.fast==1){
+ kfree(fast_mei_net.priv);
+ unregister_netdev(&fast_mei_net);
+ }
+ chantype.interleave=0;
+ chantype.fast=0;
+ meiMailboxInterruptsDisable(); //disable all MEI interrupts
+ if(mei_arc_swap_buff == NULL){
+ mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL);
+ if(mei_arc_swap_buff==NULL){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n malloc fail for codeswap buff");
+#endif
+ meierr=MEI_FAILURE;
+ }
+ }
+ if(meiForceRebootAdslModem() != MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n meiForceRebootAdslModem() error...");
+#endif
+ meierr=MEI_FAILURE;
+ }
+ interruptible_sleep_on(&wait_queue_codeswap);
+ // reset is called
+ break;
+ case AMAZON_MEI_MIB_DAEMON:
+#ifdef IFX_SMALL_FOOTPRINT /* [ */
+ return -1;
+#else /* ][ !IFX_SMALL_FOOTPRINT */
+ i=0;
+ while(1){
+ if(i<MIB_INTERVAL)
+ interruptible_sleep_on_timeout(&wait_queue_mibdaemon, ((MIB_INTERVAL-i)/(1000/HZ)));
+ i=0;
+ if(showtime==1){
+// printk("\n\n update mib");
+
+ do_gettimeofday(&time_now);
+ if(time_now.tv_sec - current_intvl->start_time.tv_sec>=900){
+ if(current_intvl->list.next!=&interval_list){
+ current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
+ do_gettimeofday(&(current_intvl->start_time));
+ }
+ else{
+ mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list);
+ list_del(interval_list.next);
+ memset(mib_ptr, 0, sizeof(amazon_mei_mib));
+ list_add_tail(&(mib_ptr->list), &interval_list);
+ if(current_intvl->list.next==&interval_list)
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nlink list error");
+#endif
+ current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
+ do_gettimeofday(&(current_intvl->start_time));
+ }
+ }
+
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+/*
+ ATUC_PERF_LO_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 0 Index 0");
+#endif
+ }
+ else{
+ if(RxMessage[4]&PLAM_LOS_FailureBit){
+ current_intvl->AtucPerfLos++;
+ ATUC_PERF_LOSS++;
+ CurrStatus.adslAtucCurrStatus = 2;
+ }
+ if(RxMessage[4]&PLAM_LOF_FailureBit){
+ current_intvl->AtucPerfLof++;
+ ATUC_PERF_LOFS++;
+ CurrStatus.adslAtucCurrStatus = 1;
+ }
+ if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit)))
+ CurrStatus.adslAtucCurrStatus = 0;
+ }
+*/
+ ATUC_PERF_ESS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 7 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS;
+ if(temp>=0){
+ current_intvl->AtucPerfEs+=temp;
+ ATUC_PERF_ESS+=temp;
+ mib_pread.ATUC_PERF_ESS = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
+ ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
+ mib_pread.ATUC_PERF_ESS = RxMessage[4];
+ }
+ }
+/*
+ ATUR_PERF_LO_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 1 Index 0");
+#endif
+ }
+ else{
+ if(RxMessage[4]&PLAM_LOS_FailureBit){
+ current_intvl->AturPerfLos++;
+ ATUR_PERF_LOSS++;
+ CurrStatus.adslAturCurrStatus = 2;
+ }
+ if(RxMessage[4]&PLAM_LOF_FailureBit){
+ current_intvl->AturPerfLof++;
+ ATUR_PERF_LOFS++;
+ CurrStatus.adslAturCurrStatus = 1;
+ }
+ if(RxMessage[4]&PLAM_LPR_FailureBit){
+ current_intvl->AturPerfLpr++;
+ ATUR_PERF_LPR++;
+ CurrStatus.adslAturCurrStatus = 3;
+ }
+ if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit)))
+ CurrStatus.adslAturCurrStatus = 0;
+ }
+*/
+ ATUR_PERF_ESS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 33 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS;
+ if(temp>=0){
+ current_intvl->AturPerfEs+=temp;
+ ATUR_PERF_ESS+=temp;
+ mib_pread.ATUR_PERF_ESS = RxMessage[4];
+ }
+ else{
+ current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
+ ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
+ mib_pread.ATUR_PERF_ESS=RxMessage[4];
+ }
+ }
+ // to update rx/tx blocks
+ ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 20 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4];
+ }
+ ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 21 Index 0");
+#endif
+ }
+ else{
+ temp2 = RxMessage[4];
+ }
+ if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){
+ current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
+ ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
+ mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
+ }
+ else{
+ current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
+ ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
+ mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
+ }
+ current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk;
+ ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK;
+/*
+ ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
+ printk("\n\nCMV fail, Group 7 Address 20 Index 0");
+ else{
+ if(RxMessage[4]){
+ current_intvl->AturChanPerfTxBlk+=RxMessage[4];
+ ATUR_CHAN_TX_BLK+=RxMessage[4];
+ }
+ }
+ ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
+ printk("\n\nCMV fail, Group 7 Address 21 Index 0");
+ else{
+ if(RxMessage[4]){
+ current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16);
+ ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16);
+ }
+ }
+*/
+ if(chantype.interleave == 1){
+ ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 3 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL;
+ if(temp>=0){
+ current_intvl->AturChanPerfCorrBlk+=temp;
+ ATUR_CHAN_CORR_BLK+=temp;
+ mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
+ }
+ else{
+ current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
+ ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
+ mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
+ }
+ }
+ }
+ else if(chantype.fast == 1){
+ ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 3 Index 1");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST;
+ if(temp>=0){
+ current_intvl->AturChanPerfCorrBlk+=temp;
+ ATUR_CHAN_CORR_BLK+=temp;
+ mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
+ }
+ else{
+ current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
+ ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
+ mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
+ }
+ }
+ }
+
+ if(chantype.interleave == 1){
+ ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 2 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL;
+ if(temp>=0){
+ current_intvl->AturChanPerfUncorrBlk+=temp;
+ ATUR_CHAN_UNCORR_BLK+=temp;
+ mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
+ }
+ else{
+ current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
+ ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
+ mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
+ }
+ }
+ }
+ else if(chantype.fast == 1){
+ ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 2 Index 1");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST;
+ if(temp>=0){
+ current_intvl->AturChanPerfUncorrBlk+=temp;
+ ATUR_CHAN_UNCORR_BLK+=temp;
+ mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
+ }
+ else{
+ current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
+ ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
+ mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
+ }
+ }
+ }
+
+ //RFC-3440
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+ ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //???
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 0 Address 0 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR;
+ if(temp>=0){
+ current_intvl->AtucPerfStatFastR+=temp;
+ ATUC_PERF_STAT_FASTR+=temp;
+ mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
+ ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
+ mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
+ }
+ }
+ ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //???
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 0 Address 0 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR;
+ if(temp>=0){
+ current_intvl->AtucPerfStatFailedFastR+=temp;
+ ATUC_PERF_STAT_FAILED_FASTR+=temp;
+ mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
+ ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
+ mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
+ }
+ }
+ ATUC_PERF_STAT_SESL_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 8 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL;
+ if(temp>=0){
+ current_intvl->AtucPerfStatSesL+=temp;
+ ATUC_PERF_STAT_SESL+=temp;
+ mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
+ ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
+ mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
+ }
+ }
+ ATUC_PERF_STAT_UASL_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 10 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL;
+ if(temp>=0){
+ current_intvl->AtucPerfStatUasL+=temp;
+ ATUC_PERF_STAT_UASL+=temp;
+ mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
+ ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
+ mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
+ }
+ }
+ ATUR_PERF_STAT_SESL_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 34 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL;
+ if(temp>=0){
+ current_intvl->AtucPerfStatUasL+=temp;
+ ATUC_PERF_STAT_UASL+=temp;
+ mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
+ ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
+ mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
+ }
+ }
+
+#endif
+ up(&mei_sema);
+
+ do_gettimeofday(&time_fini);
+ i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec
+ }//showtime==1
+ }
+ break;
+#endif /* ] !IFX_SMALL_FOOTPRINT */
+ case AMAZON_MEI_RESET:
+ case AMAZON_MEI_REBOOT:
+ case AMAZON_MEI_SHOWTIME:
+/* if(mei_arc_swap_buff !=NULL){
+ kfree(mei_arc_swap_buff);
+ mei_arc_swap_buff=NULL;
+ }
+ if(image_buffer !=NULL){
+// kfree(image_buffer);
+ vfree(image_buffer);
+ image_buffer =NULL;
+ }
+*/
+ if(clreoc_command_pkt !=NULL){
+ kfree(clreoc_command_pkt);
+ clreoc_command_pkt =NULL;
+ }
+ for(i=0;i<CLREOC_BUFF_SIZE;i++)
+ clreoc_pkt[i].len=0; //flush all remaining clreoc commands in buffer
+/*
+ memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM));
+ INIT_LIST_HEAD(&interval_list);
+ for(i=0;i<INTERVAL_NUM;i++)
+ list_add_tail(&(mei_mib[i].list), &interval_list);
+ current_intvl = list_entry(interval_list.next, amazon_mei_mib, list);
+ do_gettimeofday(&(current_intvl->start_time));
+ ATUC_PERF_LOFS=0;
+ ATUC_PERF_LOSS=0;
+ ATUC_PERF_ESS=0;
+ ATUC_PERF_INITS=0;
+ ATUR_PERF_LOFS=0;
+ ATUR_PERF_LOSS=0;
+ ATUR_PERF_LPR=0;
+ ATUR_PERF_ESS=0;
+ ATUR_CHAN_RECV_BLK=0;
+ ATUR_CHAN_TX_BLK=0;
+ ATUR_CHAN_CORR_BLK=0;
+ ATUR_CHAN_UNCORR_BLK=0;
+ memset((((u8 *)&AlarmConfProfile)+32), 0, 16*4);
+ AlarmConfProfile.adslLineAlarmConfProfileRowStatus=1;
+*/
+ PrevTxRate.adslAtucChanPrevTxRate=0;
+ PrevTxRate.adslAturChanPrevTxRate=0;
+ CurrStatus.adslAtucCurrStatus=0;
+ CurrStatus.adslAturCurrStatus=0;
+
+ if((command==AMAZON_MEI_RESET) || (command==AMAZON_MEI_REBOOT)){
+#ifdef AMAZON_CHECK_LINK
+ if (adsl_link_notify){
+ (*adsl_link_notify)(0);
+ }
+#endif
+ showtime=0;
+ //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
+ // disconnect net_dev
+ if(chantype.interleave==1){
+ kfree(interleave_mei_net.priv);
+ unregister_netdev(&interleave_mei_net);
+// if(unregister_netdev(&interleave_mei_net)!=0)
+// printk("\n unregister interleave fail");
+ }
+ else if(chantype.fast==1){
+ kfree(fast_mei_net.priv);
+ unregister_netdev(&fast_mei_net);
+// if(unregister_netdev(&fast_mei_net)!=0)
+// printk("\n unregister fast fail");
+ }
+ chantype.interleave=0;
+ chantype.fast=0;
+// 603221:tc.chen start
+ chantype.bearchannel0 = 0;
+ chantype.bearchannel1 = 0;
+ adsl_mode = 0;
+// 603221:tc.chen end
+
+ while(1){
+
+ makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, NULL); //maximum allowed tx message length, in bytes
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+ //printk("AdslInitStatsData.FullInitializationCount++\n");
+ AdslInitStatsData.FullInitializationCount++;
+ //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
+ AdslInitStatsData.FailedFullInitializationCount++;
+ //printk("AdslInitStatsData.LINIT_Errors++\n");
+ AdslInitStatsData.LINIT_Errors++;
+ }else
+ {
+ //printk("RxMessage=%X\n",RxMessage[4]);
+ if ( RxMessage[4]!=0x1)
+ {
+ //printk("AdslInitStatsData.FullInitializationCount++\n");
+ AdslInitStatsData.FullInitializationCount++;
+ if ( RxMessage[4] != 0x7)
+ {
+ //printk("AdslInitStatsData.LINIT_Errors++\n");
+ AdslInitStatsData.LINIT_Errors++;
+ //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
+ AdslInitStatsData.FailedFullInitializationCount++;
+
+ }
+ }
+ }
+
+ reboot_flag=0;
+ wake_up_interruptible(&wait_queue_codeswap); //wake up codeswap daemon
+
+ interruptible_sleep_on_timeout(&wait_queue_reboot, 1*HZ); // sleep until arc ready
+#ifdef ARC_READY_ACK
+ if(reboot_flag!=0)
+ break;
+ else
+ {
+ up(&mei_sema);
+ printk("\n reboot retry");
+ }
+#else
+ break;
+#endif
+ }
+ }
+ else{ //AMAZON_MEI_SHOWTIME
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ // clreoc stuff
+ makeCMV(H2D_CMV_READ, INFO, 83, 0, 1, data); //maximum allowed tx message length, in bytes
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 83 Index 0");
+#endif
+ }
+ else{
+ clreoc_max_tx_len = (int)RxMessage[4];
+ clreoc_command_pkt = kmalloc((clreoc_max_tx_len*CLREOC_BUFF_SIZE), GFP_KERNEL);
+ if(clreoc_command_pkt == NULL){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("kmalloc error for clreoc_command_pkt\n\n");
+#endif
+ up(&mei_sema);
+ return -1;
+ }
+ for(i=0;i<CLREOC_BUFF_SIZE;i++){
+ clreoc_pkt[i].command = (u8 *)(((u8 *)clreoc_command_pkt) + (clreoc_max_tx_len*i));
+ clreoc_pkt[i].len=0;
+ }
+ }
+
+ // decide what channel, then register
+ makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 2 Address 12 Index 0");
+#endif
+ }
+ else{
+ if((RxMessage[4]&0x1)==1){
+ if(register_netdev(&interleave_mei_net)!=0){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n Register interleave Device Failed.");
+#endif
+ }
+ else{
+ chantype.interleave = 1;
+ chantype.fast= 0;
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n channel is interleave");
+#endif
+ }
+ }
+ else if((RxMessage[4]&0x2)==2){
+ if(register_netdev(&fast_mei_net)!=0){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n Register fast Device Failed.");
+#endif
+ }
+ else{
+ chantype.fast = 1;
+ chantype.interleave = 0;
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n channel is fast");
+#endif
+ }
+ }
+ else{
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\nunknown channel type, 0x%8x", RxMessage[4]);
+#endif
+ }
+// 603221:tc.chen start
+ if ( (RxMessage[4]&0x100) == 0x100)
+ {
+ chantype.bearchannel0 = 1;
+ }else if ( (RxMessage[4]&0x100) == 0x200)
+ {
+ chantype.bearchannel1 = 1;
+ }
+// 603221:tc.chen end
+ }
+// 603221:tc.chen start
+ // read adsl mode
+ makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+ }
+ adsl_mode = RxMessage[4];
+// 603221:tc.chen end
+ makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+ }
+ adsl_mode_extend = RxMessage[4];
+
+ // update previous channel tx rate
+ ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 1 Index 0");
+#endif
+ PrevTxRate.adslAtucChanPrevTxRate = 0;
+ }
+ else{
+ PrevTxRate.adslAtucChanPrevTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+ ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 6 Address 0 Index 0");
+#endif
+ PrevTxRate.adslAturChanPrevTxRate = 0;
+ }
+ else{
+ PrevTxRate.adslAturChanPrevTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
+ }
+
+// up(&mei_sema);
+
+// showtime=1;
+ //SET_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO OFF
+//dying gasp -start
+#ifdef IFX_DYING_GASP
+ lop_debugwr.buffer[0]=0xffffffff; //dying gasp
+ lop_debugwr.iCount=1; //dying gasp
+ makeCMV(H2D_CMV_READ, INFO, 66, 4, 1, NULL);
+ //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 66 Index 4");
+ }
+#endif
+ lop_debugwr.iAddress=(u32)RxMessage[4];
+ makeCMV(H2D_CMV_READ, INFO, 66, 5, 1, NULL);
+ //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 3 Address 66 Index 5");
+ }
+#endif
+ lop_debugwr.iAddress+=((u32)RxMessage[4])<<16;
+
+//dying gasp -end
+#endif // IFX_DYING_GASP
+
+//joelin 04/16/2005-start
+ makeCMV(H2D_CMV_WRITE, PLAM, 10, 0, 1, &unavailable_seconds);
+ //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 10 Index 0");
+
+#endif
+ }
+
+
+//joelin 04/16/2005-end
+ showtime=1;
+ up(&mei_sema);
+#ifdef AMAZON_CHECK_LINK
+ if (adsl_link_notify){
+ (*adsl_link_notify)(1);
+ }
+#endif
+
+
+ }
+ break;
+/*
+ case AMAZON_MEI_REPLY:
+ copy_from_user((char *)buff, (char *)lon, MSG_LENGTH * 2);
+ if(meiCMV(buff, YES_REPLY) != MEI_SUCCESS){
+ printk("\n\n meiCMV no reply back");
+ meierr=MEI_FAILURE;
+ }
+ else
+ copy_to_user((char *)lon, (char *)RxMessage, MSG_LENGTH * 2);
+ break;
+ case AMAZON_MEI_NOREPLY:
+ copy_from_user((char *)buff, (char *)lon, MSG_LENGTH * 2);
+ if(meiCMV(buff, NO_REPLY) != MEI_SUCCESS){
+ printk("\n\n meiCMV Host to DSP failed");
+ meierr=MEI_FAILURE;
+ }
+ break;
+*/
+
+ case AMAZON_MEI_HALT:
+ meiHaltArc();
+ break;
+ case AMAZON_MEI_CMV_WINHOST:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+
+ if (!from_kernel )
+ copy_from_user((char *)TxMessage, (char *)lon, MSG_LENGTH*2);//joelin
+ else
+ memcpy(TxMessage,(char *)lon,MSG_LENGTH*2);
+
+#if 0
+// if((TxMessage[0]&0xff0)==0x0a0){
+ for(i=0;i<16;i++){
+ printk("\nTxMessage[%i]=%8x", i, TxMessage[i]);
+ }
+// }
+#endif
+
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk("\n\n WINHOST CMV fail ");
+ printk("\n\nWINHOST CMV fail :TxMessage:%X %X %X %X, RxMessage:%X %X %X %X %X\n",TxMessage[0],TxMessage[1],TxMessage[2],TxMessage[3],RxMessage[0],RxMessage[1],RxMessage[2],RxMessage[3],RxMessage[4]);
+#endif
+ meierr = MEI_FAILURE;
+ }
+ else
+ {
+ if (!from_kernel ) //joelin
+ copy_to_user((char *)lon, (char *)RxMessage, MSG_LENGTH*2);
+ else
+ memcpy((char *)lon,(char *)RxMessage,MSG_LENGTH*2);
+ }
+
+ up(&mei_sema);
+ break;
+#ifdef AMAZON_MEI_CMV_EXTRA
+ case AMAZON_MEI_CMV_READ:
+ copy_from_user((char *)(&regrdwr), (char *)lon, sizeof(meireg));
+ meiLongwordRead(regrdwr.iAddress, &(regrdwr.iData));
+ {
+// printk("\n\n iAddress = %8x",regrdwr.iAddress);
+ }
+ copy_to_user((char *)lon, (char *)(&regrdwr), sizeof(meireg));
+ {
+// printk("\n\n iData readback = %8x", regrdwr.iData);
+ }
+ break;
+#endif
+
+#ifdef AMAZON_MEI_CMV_EXTRA
+ case AMAZON_MEI_CMV_WRITE:
+ copy_from_user((char *)(&regrdwr), (char *)lon, sizeof(meireg));
+ {
+// printk("\n\n iAddress = %8x",regrdwr.iAddress);
+// printk("\n\n iData = %8x",regrdwr.iData);
+ }
+ meiLongwordWrite(regrdwr.iAddress, regrdwr.iData);
+ break;
+#endif
+
+#ifdef AMAZON_MEI_CMV_EXTRA
+ case AMAZON_MEI_REMOTE:
+ copy_from_user((char *)(&i), (char *)lon, sizeof(int));
+ if(i==0){
+ meiMailboxInterruptsEnable();
+
+ up(&mei_sema);
+ }
+ else if(i==1){
+ meiMailboxInterruptsDisable();
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+ }
+ else{
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n AMAZON_MEI_REMOTE argument error");
+#endif
+ meierr=MEI_FAILURE;
+ }
+ break;
+#endif
+
+#ifdef AMAZON_MEI_CMV_EXTRA
+ case AMAZON_MEI_READDEBUG:
+ case AMAZON_MEI_WRITEDEBUG:
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+#ifdef IFX_DYING_GASP
+ if (!from_kernel) copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));//dying gasp
+ else memcpy((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));
+#else //IFX_DYING_GASP
+ copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));
+
+#endif //IFX_DYING_GASP
+#if 0
+ printk("\nIN iAddress: %8x, iCount:%8x\n", debugrdwr.iAddress, debugrdwr.iCount);
+#endif
+
+ if(command==AMAZON_MEI_READDEBUG)
+ meiDebugRead(debugrdwr.iAddress, debugrdwr.buffer, debugrdwr.iCount);
+ else
+ meiDebugWrite(debugrdwr.iAddress, debugrdwr.buffer, debugrdwr.iCount);
+
+#ifdef IFX_DYING_GASP
+ if (!from_kernel) copy_to_user((char *)lon, (char*)(&debugrdwr), sizeof(debugrdwr));//dying gasp
+#else //IFX_DYING_GASP
+ copy_to_user((char *)lon, (char*)(&debugrdwr), sizeof(debugrdwr));
+#endif //IFX_DYING_GASP
+ up(&mei_sema);
+
+#if 0
+ printk("\nOUT iAddress: %8x, iCount:%8x\n", debugrdwr.iAddress, debugrdwr.iCount);
+ for(i=0;i<debugrdwr.iCount;i++)
+ printk("\n %8x",debugrdwr.buffer[i]);
+#endif
+ break;
+#endif
+
+ case AMAZON_MEI_LOP:
+ //GPIO31 :dying gasp event indication
+ // (1) logic high: dying gasp event is false (default)
+ // (2) logic low: dying gasp event is true
+#ifdef IFX_DYING_GASP
+ break;
+#else
+ CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000);
+ SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000);
+ asm("SYNC");
+ if(((*((volatile u32 *)0xB0100B44))&0x8000)==0x0)
+ meierr=MEI_FAILURE; //return - to indicate loss of power
+ break;
+#endif //#ifdef IFX_DYING_GASP
+
+ //for PCM
+ case AMAZON_MEI_PCM_SETUP:
+ //gpio
+
+ *AMAZON_GPIO_P0_DIR |=1<<15;
+ *AMAZON_GPIO_P0_ALTSEL0 |=1<<15;
+ *AMAZON_GPIO_P0_ALTSEL1 &=~(1<<15);
+ *AMAZON_GPIO_P0_OD |=1<<15;
+
+ /*GPIO 16 TDM_DI*/
+ *AMAZON_GPIO_P1_DIR &=~1;
+ *AMAZON_GPIO_P1_ALTSEL0 |=1;
+ *AMAZON_GPIO_P1_ALTSEL1 &=~1;
+
+ /*GPIO 17 TDM_DCL */
+ *AMAZON_GPIO_P1_DIR|=0x02;
+ *AMAZON_GPIO_P1_ALTSEL0|=0x02;
+ *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x02;
+ *AMAZON_GPIO_P1_OD|=0x02;
+
+ /*GPIO 18 TDM FSC*/
+ *AMAZON_GPIO_P1_DIR|=0x04;
+ *AMAZON_GPIO_P1_ALTSEL0|=0x04;
+ *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x04;
+ *AMAZON_GPIO_P1_OD|=0x04;
+
+ for(i=0;i<2;i++){
+ for(j=0;j<256;j++)
+ sampledata[i*256+j]=j;
+ }
+
+ pcm_start_addr = lon;
+
+ printk("\n\n pcm_start_addr is %8x", lon);
+
+ for(i=0;i<PCM_CHANNEL_NUM;i++){
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_16((pcm_start_addr+i*16), (u32*)(pcm_data+i), 4);
+#else
+ meiDMARead_16((pcm_start_addr+i*16), (u32*)(pcm_data+i), 4);
+#endif
+ if((pcm_data[i].S!=8)||(pcm_data[i].len<1)||(pcm_data[i].rdindex!=0)||(pcm_data[i].wrindex!=0)||(pcm_data[i].flow!=0))
+ printk("\n\n pcm_data fill in wrongly\n\n");
+ printk("\npcm_data %d",i);
+ printk("\n S = %d", pcm_data[i].S);
+ printk("\n LSW = %4x", pcm_data[i].LSW);
+ printk("\n MSW = %4x", pcm_data[i].MSW);
+ printk("\n len = %d", pcm_data[i].len);
+ printk("\n rdindex = %d", pcm_data[i].rdindex);
+ printk("\n wrindex = %d", pcm_data[i].wrindex);
+ printk("\n flow = %d", pcm_data[i].flow);
+ pcm_data[i].finish=0;
+ if(i%2==0){//tx channel
+ for(j=0;j<PCM_BUFF_SIZE/256;j++){
+ for(k=0;k<256;k++){
+ pcm_data[i].buff[j*256+k]=k;
+ /* if(k%2==0)
+ pcm_data[i].buff[j*256+k]=0xaa;
+ else
+ pcm_data[i].buff[j*256+k]=0x55;*/
+ }
+ }
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),((pcm_data[i].len/4)/2));//fill half first
+// meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),2);//fill half first
+#else
+ meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),((pcm_data[i].len/4)/2));//fill half first
+// meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),2);//fill half first
+#endif
+ pcm_data[i].point=(pcm_data[i].len)/2;
+// pcm_data[i].point=8;
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
+#else
+ meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
+#endif
+ temp = (temp &0xffff) + (((u32)(pcm_data[i].point))<<16);
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugWrite_16(pcm_start_addr+i*16+12,&temp, 1);//update wrindex
+#else
+ meiDMAWrite_16(pcm_start_addr+i*16+12,&temp, 1);//update wrindex
+#endif
+ }
+ else{// rx channel
+ pcm_data[i].point=0;
+ }
+ }
+ break;
+ case AMAZON_MEI_PCM_START_TIMER:
+ /* GPTU timer 6 */
+ /* enable the timer in the PMU */
+ *(AMAZON_PMU_PWDCR) = (*(AMAZON_PMU_PWDCR))| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI;
+ /* setup the GPTU for timer tick f_fpi == f_gptu*/
+ *(AMAZON_GPTU_CLC) = 0x100;
+ //reload value = fpi/(HZ * P), timer mode, Prescaler = 4 ( T6I = 000, T6BPS2 = 0)
+ *(AMAZON_GPTU_CAPREL) = (int)(117500000/(lon*4));
+ *(AMAZON_GPTU_T6CON) = 0x80C0;
+
+ if (request_irq(AMAZON_TIMER6_INT, amazon_timer6_interrupt_MEI,0, "hrt", NULL)!=0){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n unable to register irq for hrt!!!");
+#endif
+ return -1;
+ }
+ enable_irq(AMAZON_TIMER6_INT);
+ break;
+ case AMAZON_MEI_PCM_STOP_TIMER:
+ disable_irq(AMAZON_TIMER6_INT);
+ free_irq(AMAZON_TIMER6_INT, NULL);
+ break;
+ case AMAZON_MEI_PCM_CHECK:
+ for(i=0;i<PCM_CHANNEL_NUM;i++){
+ if(pcm_data[i].finish!=1)
+ return 0;
+ }
+ for(i=0;i<PCM_CHANNEL_NUM/2;i++){
+ j=0;
+ while(1){
+ if((pcm_data[i*2+1].buff[j]==0x0) && (pcm_data[i*2+1].buff[j+1]==0x1)&& (pcm_data[i*2+1].buff[j+2]==0x2))
+ break;
+ else
+ j++;
+ }
+ printk("\n j=%d", j);
+ temp=0;
+ for(k=0;k<((PCM_BUFF_SIZE-j)/4);k++){
+ if(memcmp(pcm_data[i*2].buff+k*4, pcm_data[i*2+1].buff+j+k*4, 4)!=0){
+ temp++;
+ printk("\n\n%2x %2x %2x %2x %2x %2x %2x %2x\n\n", *((u8*)(pcm_data[i*2].buff+k*4)), *((u8*)(pcm_data[i*2].buff+k*4+1)),*((u8*)(pcm_data[i*2].buff+k*4+2)),*((u8*)(pcm_data[i*2].buff+k*4+3)),*((u8*)(pcm_data[i*2+1].buff+j+k*4)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+1)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+2)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+3)));
+ break;
+ }
+ }
+ if(temp!=0)
+ printk("\n\n Channel pair %d not match: err32 %d\n\n", i, temp);
+ else
+ printk("\n\n Channel pair %d match\n\n", i);
+ }
+ for(i=0;i<PCM_CHANNEL_NUM;i++){
+ if(i%2==1){//rx channel
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
+#else
+ meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
+#endif
+ printk("\n\nRx channel %d: Overflow Bytes %d", i, (temp&0xffff));
+ }
+ else{//tx channel
+#ifdef PCM_ACCESS_DEBUG
+ meiDebugRead_16(pcm_start_addr+i*16, &temp, 1);
+#else
+ meiDMARead_16(pcm_start_addr+i*16, &temp, 1);
+#endif
+ printk("\n\nElectra Err: %d",(temp&0xffff));
+ }
+ }
+ //check electra overflow
+
+ meierr=1;
+ break;
+ case AMAZON_MEI_PCM_GETDATA:
+ copy_to_user(lon, pcm_data[1].buff, PCM_BUFF_SIZE);
+ break;
+ case AMAZON_MEI_PCM_GPIO:
+ //gpio
+
+ *AMAZON_GPIO_P0_DIR |=1<<15;
+ *AMAZON_GPIO_P0_ALTSEL0 |=1<<15;
+ *AMAZON_GPIO_P0_ALTSEL1 &=~(1<<15);
+ *AMAZON_GPIO_P0_OD |=1<<15;
+
+ /*GPIO 16 TDM_DI*/
+ *AMAZON_GPIO_P1_DIR &=~1;
+ *AMAZON_GPIO_P1_ALTSEL0 |=1;
+ *AMAZON_GPIO_P1_ALTSEL1 &=~1;
+
+ /*GPIO 17 TDM_DCL */
+ *AMAZON_GPIO_P1_DIR|=0x02;
+ *AMAZON_GPIO_P1_ALTSEL0|=0x02;
+ *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x02;
+ *AMAZON_GPIO_P1_OD|=0x02;
+
+ /*GPIO 18 TDM FSC*/
+ *AMAZON_GPIO_P1_DIR|=0x04;
+ *AMAZON_GPIO_P1_ALTSEL0|=0x04;
+ *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x04;
+ *AMAZON_GPIO_P1_OD|=0x04;
+ break;
+
+
+
+ //for clearEoC
+#ifdef AMAZON_CLEAR_EOC
+ case AMAZON_MEI_GET_EOC_LEN:
+ while(1){
+ current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
+ if((current_clreoc->len)>0){
+ copy_to_user((char *)lon, (char*)(&(current_clreoc->len)), 4);
+ break;
+ }
+ else//wait for eoc data from higher layer
+ interruptible_sleep_on(&wait_queue_clreoc);
+ }
+ break;
+ case AMAZON_MEI_GET_EOC_DATA:
+ current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
+ if((current_clreoc->len)>0){
+ copy_to_user((char*)lon, (char*)(current_clreoc->command), current_clreoc->len);
+ meierr=1;
+ list_del(clreoc_list.next); //remove and add to end of list
+ current_clreoc->len = 0;
+ list_add_tail(&(current_clreoc->list), &clreoc_list);
+ }
+ else
+ meierr=-1;
+ break;
+ case AMAZON_MEI_EOC_SEND:
+ copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));
+ eoc_skb = dev_alloc_skb(debugrdwr.iCount*4);
+ if(eoc_skb==NULL){
+ printk("\n\nskb alloc fail");
+ break;
+ }
+
+ eoc_skb->len=debugrdwr.iCount*4;
+ memcpy(skb_put(eoc_skb, debugrdwr.iCount*4), (char *)debugrdwr.buffer, debugrdwr.iCount*4);
+
+ ifx_push_eoc(eoc_skb); //pass data to higher layer
+ break;
+#endif //#ifdef AMAZON_CLEAR_EOC
+ case AMAZON_MIB_LO_ATUC:
+ do_gettimeofday(&time_now);
+ if(lon&0x1){
+ if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec)>2){
+ current_intvl->AtucPerfLos++;
+ ATUC_PERF_LOSS++;
+ CurrStatus.adslAtucCurrStatus = 2;
+ }
+ (mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec;
+ }
+ if(lon&0x2){
+ if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec)>2){
+ current_intvl->AtucPerfLof++;
+ ATUC_PERF_LOFS++;
+ CurrStatus.adslAtucCurrStatus = 1;
+ }
+ (mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec;
+ }
+ if(!(lon&0x3))
+ CurrStatus.adslAtucCurrStatus = 0;
+ break;
+ case AMAZON_MIB_LO_ATUR:
+ do_gettimeofday(&time_now);
+ if(lon&0x1){
+ if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec)>2){
+ current_intvl->AturPerfLos++;
+ ATUR_PERF_LOSS++;
+ CurrStatus.adslAturCurrStatus = 2;
+ }
+ (mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec;
+ }
+ if(lon&0x2){
+ if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec)>2){
+ current_intvl->AturPerfLof++;
+ ATUR_PERF_LOFS++;
+ CurrStatus.adslAturCurrStatus = 1;
+ }
+ (mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec;
+ }
+ if(lon&0x4){
+ if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec)>2){
+ current_intvl->AturPerfLpr++;
+ ATUR_PERF_LPR++;
+ CurrStatus.adslAturCurrStatus = 3;
+ }
+ (mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec = time_now.tv_sec;
+ }
+ if(!(lon&0x7))
+ CurrStatus.adslAturCurrStatus = 0;
+ break;
+ case AMAZON_MEI_DOWNLOAD:
+ // DMA the boot code page(s)
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n start download pages");
+#endif
+ for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++){
+ if( img_hdr->page[boot_loop].p_size & BOOT_FLAG){
+ page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
+ if( page_size > 0){
+ meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size);
+ }
+ }
+ if( img_hdr->page[boot_loop].d_size & BOOT_FLAG){
+ page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
+ if( page_size > 0){
+ meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size);
+ }
+ }
+ }
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n pages downloaded");
+#endif
+ break;
+ //509221:tc.chen start
+ case AMAZON_MEI_DEBUG_MODE:
+ mei_debug_mode = lon;
+ break;
+ //509221:tc.chen end
+ }
+ return meierr;
+}
+
+
+////////////////////// Interrupt handler /////////////////////////////////////////////////////
+static void mei_interrupt_arcmsgav(int,void *,struct pt_regs *);
+static void mei_interrupt_arcmsgav(int int1, void * void0, struct pt_regs * regs)
+{
+ u32 scratch;
+ u32 fetchpage;
+ u32 size;
+ u32 dest_addr;
+ u32 temp;
+ int i;
+
+ meiDebugRead(ARC_MEI_MAILBOXR, &scratch, 1);
+ if(scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK)
+ {
+ if(showtime==1){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n Code Swap Request After ShowTime !!!");
+#endif
+ }
+ else{
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk("\n\n Code Swap Request");
+#endif
+ fetchpage = scratch & ~OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK;
+ size = meiGetPage( fetchpage, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
+ if( size > 0)
+ {
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk(" : prom page num %d",fetchpage);
+#endif
+ meiDMAWrite( dest_addr, mei_arc_swap_buff, size);
+ }
+
+ size = meiGetPage( fetchpage, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
+ if( size > 0)
+ {
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk(" : data page num %d",fetchpage);
+#endif
+ meiDMAWrite( dest_addr, mei_arc_swap_buff, size);
+ }
+ }
+ // Notify arc that mailbox read complete
+ meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
+
+ // Tell ARC Codeswap is done
+ meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_CS_DONE);
+ asm("SYNC");
+ i=0;
+ while(i<WHILE_DELAY){
+ meiLongwordRead(MEI_TO_ARC_INT, &temp);
+ if((temp & MEI_TO_ARC_CS_DONE) ==0){
+#ifdef AMAZON_MEI_DEBUG_ON
+// printk("\n\n Code Swap Done");
+#endif
+ break;
+ }
+ i++;
+ if(i==WHILE_DELAY){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n MEI_TO_ARC_CS_DONE not cleared by ARC");
+ //509221:tc.chen start
+ if (!mei_debug_mode)
+ {
+ //printk("Reset Arc!\n");
+ //printk("AdslInitStatsData.FullInitializationCount++\n");
+ AdslInitStatsData.FullInitializationCount++;
+ if (!showtime)
+ {
+ //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
+ AdslInitStatsData.FailedFullInitializationCount++;
+ //printk("AdslInitStatsData.LINIT_Errors++\n");
+ AdslInitStatsData.LINIT_Errors++;
+ }
+
+ wake_up_interruptible(&wait_queue_codeswap); // wait up ioctl reboot
+ }
+ //509221:tc.chen end
+#endif
+ }
+ }
+ }
+ else{ // normal message
+// printk("\n\n interrupt");
+ meiMailboxRead(RxMessage, MSG_LENGTH);
+ if(cmv_waiting==1){
+ arcmsgav=1;
+ cmv_waiting=0;
+ wake_up_interruptible(&wait_queue_arcmsgav);
+ }
+ else{
+ indicator_count++;
+ memcpy((char *)Recent_indicator, (char *)RxMessage, MSG_LENGTH *2);
+#ifdef ARC_READY_ACK
+ if(((RxMessage[0]&0xff0)>>4)==D2H_AUTONOMOUS_MODEM_READY_MSG){ //check ARC ready message
+
+#ifdef LOCK_RETRY
+ if (reboot_lock)
+ {
+ reboot_lock = 0;
+ up(&mei_sema); // allow cmv access
+ }
+#else
+ up(&mei_sema); // allow cmv access
+#endif
+ reboot_flag=1;
+//#ifdef ADSL_LED_SUPPORT
+#if 0
+ led_support_check=1;//adsl led for 1.1.2.7.1.1
+ adsl_led_flash();//adsl led for 1.1.2.7.1.1
+#endif
+ wake_up_interruptible(&wait_queue_reboot); // wait up ioctl reboot
+ }
+#endif
+ }
+ }
+// meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
+ mask_and_ack_amazon_irq(AMAZON_MEI_INT);
+ return;
+}
+
+// 603221:tc.chen start
+////////////////////////hdlc ////////////////
+
+// get hdlc status
+static unsigned int ifx_me_hdlc_status(void)
+{
+ u16 CMVMSG[MSG_LENGTH];
+ int ret;
+
+ if (showtime!=1)
+ return -ENETRESET;
+
+ makeCMV_local(H2D_CMV_READ, STAT, 14, 0, 1, NULL,CMVMSG); //Get HDLC status
+ ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+ if (ret != 0)
+ {
+ return -EIO;
+ }
+ return CMVMSG[4]&0x0F;
+}
+
+int ifx_me_is_resloved(int status)
+{
+ u16 CMVMSG[MSG_LENGTH];
+ int ret;
+
+ if (status == ME_HDLC_MSG_QUEUED || status == ME_HDLC_MSG_SENT)
+ return ME_HDLC_UNRESOLVED;
+ if (status == ME_HDLC_IDLE)
+ {
+ makeCMV_local(H2D_CMV_READ, CNTL, 2, 0, 1, NULL,CMVMSG); //Get ME-HDLC Control
+ ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+ if (ret != 0)
+ {
+ return IFX_POP_EOC_FAIL;
+ }
+ if (CMVMSG[4]&(1<<0))
+ {
+ return ME_HDLC_UNRESOLVED;
+ }
+
+ }
+ return ME_HDLC_RESOLVED;
+}
+
+int _ifx_me_hdlc_send(unsigned char *hdlc_pkt,int len,int max_length)
+{
+ int ret;
+ u16 CMVMSG[MSG_LENGTH];
+ u16 data=0;
+ u16 pkt_len=len;
+ if (pkt_len > max_length)
+ {
+ printk("Exceed maximum eoc message length\n");
+ return -ENOBUFS;
+ }
+ //while(pkt_len > 0)
+ {
+ makeCMV_local(H2D_CMV_WRITE, INFO, 81, 0, (pkt_len+1)/2,(u16 *)hdlc_pkt,CMVMSG); //Write clear eoc message to ARC
+ ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+ if (ret != 0)
+ {
+ return -EIO;
+ }
+
+ makeCMV_local(H2D_CMV_WRITE, INFO, 83, 2, 1,&pkt_len,CMVMSG); //Update tx message length
+ ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+ if (ret != 0)
+ {
+ return -EIO;
+ }
+
+ data = (1<<0);
+ makeCMV_local(H2D_CMV_WRITE, CNTL, 2, 0, 1,&data,CMVMSG); //Start to send
+ ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+ if (ret != 0)
+ {
+ return -EIO;
+ }
+ return 0;
+ }
+}
+
+static int ifx_me_hdlc_send(unsigned char *hdlc_pkt,int hdlc_pkt_len)
+{
+ int hdlc_status=0;
+ u16 CMVMSG[MSG_LENGTH];
+ int max_hdlc_tx_length=0,ret=0,retry=0;
+
+ while(retry<10)
+ {
+ hdlc_status = ifx_me_hdlc_status();
+ if (ifx_me_is_resloved(hdlc_status)==ME_HDLC_RESOLVED) // arc ready to send HDLC message
+ {
+ makeCMV_local(H2D_CMV_READ, INFO, 83, 0, 1, NULL,CMVMSG); //Get Maximum Allowed HDLC Tx Message Length
+ ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+ if (ret != 0)
+ {
+ return -EIO;
+ }
+ max_hdlc_tx_length = CMVMSG[4];
+ ret = _ifx_me_hdlc_send(hdlc_pkt,hdlc_pkt_len,max_hdlc_tx_length);
+ return ret;
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(10);
+ }
+ return -EBUSY;
+}
+
+int ifx_mei_hdlc_read(char *hdlc_pkt,int max_hdlc_pkt_len)
+{
+ u16 CMVMSG[MSG_LENGTH];
+ int msg_read_len,ret=0,pkt_len=0,retry = 0;
+
+ while(retry<10)
+ {
+ ret = ifx_me_hdlc_status();
+ if (ret == ME_HDLC_RESP_RCVD)
+ {
+ int current_size=0;
+ makeCMV_local(H2D_CMV_READ, INFO, 83, 3, 1, NULL,CMVMSG); //Get EoC packet length
+ ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+ if (ret != 0)
+ {
+ return -EIO;
+ }
+
+ pkt_len = CMVMSG[4];
+ if (pkt_len > max_hdlc_pkt_len)
+ {
+ ret = -ENOMEM;
+ goto error;
+ }
+ while( current_size < pkt_len)
+ {
+ if (pkt_len - current_size >(MSG_LENGTH*2-8))
+ msg_read_len = (MSG_LENGTH*2-8);
+ else
+ msg_read_len = pkt_len - (current_size);
+ makeCMV_local(H2D_CMV_READ, INFO, 82, 0 + (current_size/2), (msg_read_len+1)/2, NULL,CMVMSG); //Get hdlc packet
+ ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+ if (ret != 0)
+ {
+ goto error;
+ }
+ memcpy(hdlc_pkt+current_size,&CMVMSG[4],msg_read_len);
+ current_size +=msg_read_len;
+ }
+ ret = current_size;
+ break;
+ }else
+ {
+ ret = -ENODATA;
+ }
+
+ retry++;
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(10);
+
+ }
+ return ret;
+error:
+
+ return ret;
+}
+
+////////////////////////hdlc ////////////////
+// 603221:tc.chen end
+
+/////////////////////// clearEoC, int ifx_pop_eoc(sk_buff * pkt) //////////
+int ifx_pop_eoc(struct sk_buff * pkt);
+int ifx_pop_eoc(struct sk_buff * pkt)
+{
+ amazon_clreoc_pkt * current;
+ if(showtime!=1){
+ dev_kfree_skb(pkt);
+ return IFX_POP_EOC_FAIL;
+ }
+ if((pkt->len)>clreoc_max_tx_len){
+ dev_kfree_skb(pkt);
+ return IFX_POP_EOC_FAIL;
+ }
+ current = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
+ while(1){
+ if(current->len==0){
+ memcpy(current->command, pkt->data, pkt->len);
+ current->len=pkt->len;
+ break;
+ }
+ else{
+ if((current->list).next==&clreoc_list){
+ dev_kfree_skb(pkt);
+ return IFX_POP_EOC_FAIL; //buffer full
+ }
+ current = list_entry((current->list).next,amazon_clreoc_pkt, list);
+ }
+ }
+ wake_up_interruptible(&wait_queue_clreoc);
+
+ dev_kfree_skb(pkt);
+ return IFX_POP_EOC_DONE;
+}
+/* this is used in circular fifo mode */
+/*
+int ifx_pop_eoc(sk_buff * pkt);
+int ifx_pop_eoc(sk_buff * pkt)
+{
+ int buff_space,i;
+ if(showtime!=1)
+ return IFX_POP_EOC_FAIL;
+
+ if(clreoc_wr>=clreoc_rd)
+ buff_space = (MEI_CLREOC_BUFF_SIZE-1)-(clreoc_wr - clreoc_rd);
+ else
+ buff_space = clreoc_rd - clreoc_wr - 1;
+ if((pkt->len)>buff_space)
+ return IFX_POP_EOC_FAIL;
+
+ if((clreoc_wr+pkt->len)>MEI_CLREOC_BUFF_SIZE){
+ memcpy((clreoc+clreoc_wr), pkt->data, ((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1));
+ memcpy(clreoc, (pkt->data)+((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1), (pkt->len)-((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1));
+ clreoc_wr=(clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE;
+ }
+ else{
+ memcpy((clreoc+clreoc_wr), pkt->data, pkt->len);
+ if((clreoc_wr+pkt->len)=MEI_CLREOC_BUFF_SIZE)
+ clreoc_wr=0;
+ else
+ clreoc_wr+=pkt->len;
+ }
+ wake_up_interruptible(&wait_queue_clreoc);
+ return IFX_POP_EOC_DONE;
+}
+*/
+
+
+////////////////////////////////////////////////////////////////////////////
+//int amazon_mei_init_module (void);
+//void amazon_mei_cleanup_module (void);
+//int __init init_module (void);
+//void __exit cleanup_module (void);
+
+int __init amazon_mei_init_module(void)
+//int __init init_module(void)
+{
+ struct proc_dir_entry *entry;
+ int i;
+
+//dying gasp-start
+#ifdef IFX_DYING_GASP
+
+//000003:fchang Start
+#ifdef CONFIG_CPU_AMAZON_E
+ //GPIO31 :dying gasp event indication
+ // (1) logic high: dying gasp event is false (default)
+ // (2) logic low: dying gasp event is true
+ CLEAR_BIT((*((volatile u32 *)0xB0100B18)), 0x4);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B1c)), 0x4);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B20)), 0x4);
+ SET_BIT((*((volatile u32 *)0xB0100B24)), 0x4);
+ asm("SYNC");
+#else //000003:fchang End
+
+ //GPIO31 :dying gasp event indication
+ // (1) logic high: dying gasp event is false (default)
+ // (2) logic low: dying gasp event is true
+ CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000);
+ SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000);
+#if 0
+//warning-led-start
+//GPIO 22
+ SET_BIT ((*((volatile u32 *)0xB0100B48)), 0x40);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x40);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x40);
+ SET_BIT((*((volatile u32 *)0xB0100B54)), 0x40);
+ CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //GPIO ON
+ printk("LED ON ON ON ON ON ON.....");
+//warning-led-end
+#endif
+ asm("SYNC");
+#endif //000003:fchang
+
+#endif //IFX_DYING_GASP
+//dying gasp -end
+
+
+ reg_entry_t regs_temp[PROC_ITEMS] = // Items being debugged
+ {
+ /* { flag, name, description } */
+ { &arcmsgav, "arcmsgav", "arc to mei message ", 0 },
+ { &cmv_reply, "cmv_reply", "cmv needs reply", 0},
+ { &cmv_waiting, "cmv_waiting", "waiting for cmv reply from arc", 0},
+ { &indicator_count, "indicator_count", "ARC to MEI indicator count", 0},
+ { &cmv_count, "cmv_count", "MEI to ARC CMVs", 0},
+ { &reply_count, "reply_count", "ARC to MEI Reply", 0},
+ { (int *)Recent_indicator, "Recent_indicator", "most recent indicator", 0},
+ { (int *)8, "version", "version of firmware", 0},
+ };
+ memcpy((char *)regs, (char *)regs_temp, sizeof(regs_temp));
+
+
+ //sema_init(&mei_sema, 0); // semaphore initialization, mutex
+ sema_init(&mei_sema, 1); // semaphore initialization, mutex
+
+ init_waitqueue_head(&wait_queue_arcmsgav); // for ARCMSGAV
+ init_waitqueue_head(&wait_queue_codeswap); // for codeswap daemon
+ init_waitqueue_head(&wait_queue_mibdaemon); // for mib daemon
+ init_waitqueue_head(&wait_queue_reboot); // for ioctl reboot
+ init_waitqueue_head(&wait_queue_clreoc); // for clreoc_wr function
+ init_waitqueue_head(&wait_queue_loop_diagnostic); // for loop diagnostic function
+#ifdef ADSL_LED_SUPPORT
+ init_waitqueue_head(&wait_queue_led); // adsl led for led function
+ init_waitqueue_head(&wait_queue_led_polling); // adsl led for led function
+ led_task.routine = adsl_led_flash_task; // adsl led for led function
+ led_poll_init(); // adsl led for led function
+#endif //ADSL_LED_SUPPORT
+#ifdef IFX_DYING_GASP
+ init_waitqueue_head(&wait_queue_dying_gasp); // IFX_DYING_GASP
+ lop_poll_init(); // IFX_DYING_GASP
+#endif //IFX_DYING_GASP
+
+ init_waitqueue_head(&wait_queue_uas_poll);//joelin 04/16/2005
+ unavailable_seconds_poll_init();//joelin 04/16/2005
+ memset(&mib_pflagtime, 0, (sizeof(mib_flags_pretime)));
+
+ // initialize link list for intervals
+ mei_mib = (amazon_mei_mib *)kmalloc((sizeof(amazon_mei_mib)*INTERVAL_NUM), GFP_KERNEL);
+ if(mei_mib == NULL){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("kmalloc error for amazon_mei_mib\n\n");
+#endif
+ return -1;
+ }
+ memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM));
+ INIT_LIST_HEAD(&interval_list);
+ for(i=0;i<INTERVAL_NUM;i++)
+ list_add_tail(&(mei_mib[i].list), &interval_list);
+ current_intvl = list_entry(interval_list.next, amazon_mei_mib, list);
+ do_gettimeofday(&(current_intvl->start_time));
+ // initialize clreoc list
+ clreoc_pkt = (amazon_clreoc_pkt *)kmalloc((sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE), GFP_KERNEL);
+ if(clreoc_pkt == NULL){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("kmalloc error for clreoc_pkt\n\n");
+#endif
+ return -1;
+ }
+ memset(clreoc_pkt, 0, (sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE));
+ INIT_LIST_HEAD(&clreoc_list);
+ for(i=0;i<CLREOC_BUFF_SIZE;i++)
+ list_add_tail(&(clreoc_pkt[i].list), &clreoc_list);
+
+ memset(&AdslInitStatsData, 0, sizeof(AdslInitStatsData));
+ if (register_chrdev(major, "amazon_mei", &mei_operations)!=0) {
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n unable to register major for amazon_mei!!!");
+#endif
+ return -1;
+ }
+ if (request_irq(AMAZON_MEI_INT, mei_interrupt_arcmsgav,0, "amazon_mei_arcmsgav", NULL)!=0){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n unable to register irq for amazon_mei!!!");
+#endif
+ return -1;
+ }
+// disable_irq(AMAZON_MEI_INT);
+ enable_irq(AMAZON_MEI_INT);
+ // procfs
+ meidir=proc_mkdir(MEI_DIRNAME, &proc_root);
+ if ( meidir == NULL) {
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk(KERN_ERR ": can't create /proc/" MEI_DIRNAME "\n\n");
+#endif
+ return(-ENOMEM);
+ }
+
+ for(i=0;i<NUM_OF_REG_ENTRY;i++) {
+ entry = create_proc_entry(regs[i].name,
+ S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH,
+ meidir);
+ if(entry) {
+ regs[i].low_ino = entry->low_ino;
+ entry->proc_fops = &proc_operations;
+ } else {
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk( KERN_ERR
+ ": can't create /proc/" MEI_DIRNAME
+ "/%s\n\n", regs[i].name);
+#endif
+ return(-ENOMEM);
+ }
+ }
+ ///////////////////////////////// register net device ////////////////////////////
+ if(register_netdev(&phy_mei_net)!=0){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\n Register phy Device Failed.");
+#endif
+ return -1;
+ }
+/*
+ if(register_netdev(&interleave_mei_net)!=0){
+ printk("\n\n Register interleave Device Failed.");
+ return -1;
+ }
+ if(register_netdev(&fast_mei_net)!=0){
+ printk("\n\n Register fast Device Failed.");
+ return -1;
+ }
+*/
+#ifdef DFE_LOOPBACK
+ mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL);
+ if (mei_arc_swap_buff){
+#ifdef ARC_READY_ACK
+ if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready
+ {
+ return -ERESTARTSYS;
+ }
+#ifdef LOCK_RETRY
+ reboot_lock = 1;
+#endif
+#endif
+ meiForceRebootAdslModem();
+ kfree(mei_arc_swap_buff);
+ }else{
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("cannot load image: no memory\n\n");
+#endif
+ }
+#endif
+#ifdef IFX_SMALL_FOOTPRINT
+ mib_poll_init();
+#endif
+ return 0;
+}
+
+void __exit amazon_mei_cleanup_module(void)
+//void __exit cleanup_module(void)
+{
+ int i;
+#ifdef ADSL_LED_SUPPORT
+ stop_led_module=1; //wake up and clean led module
+ led_support_check=0;//joelin , clear task
+ showtime=0;//joelin,clear task
+ //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
+ firmware_support_led=0;//joelin ,clear task
+ wake_up_interruptible(&wait_queue_led); //wake up and clean led module
+ wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module
+#endif
+ for(i=0;i<NUM_OF_REG_ENTRY;i++)
+ remove_proc_entry(regs[i].name, meidir);
+ remove_proc_entry(MEI_DIRNAME, &proc_root);
+
+ disable_irq(AMAZON_MEI_INT);
+ free_irq(AMAZON_MEI_INT, NULL);
+ unregister_chrdev(major, "amazon_mei");
+
+ kfree(mei_mib);
+ kfree(clreoc_pkt);
+
+ kfree(phy_mei_net.priv);
+ unregister_netdev(&phy_mei_net);
+
+ return;
+}
+#ifdef IFX_SMALL_FOOTPRINT
+
+
+int adsl_mib_poll(void *unused)
+{
+ struct task_struct *tsk = current;
+ int i=0;
+ struct timeval time_now;
+ struct timeval time_fini;
+ u32 temp,temp2;
+
+ amazon_mei_mib * mib_ptr;
+// u16 buff[MSG_LENGTH]__attribute__ ((aligned(4)));
+ u16 * data=NULL; //used in makeCMV, to pass in payload when CMV set, ignored when CMV read.
+
+ daemonize();
+ strcpy(tsk->comm, "kmibpoll");
+ sigfillset(&tsk->blocked);
+
+ printk("Inside mib poll loop ...\n");
+ i=0;
+ while(1){
+ if(i<MIB_INTERVAL)
+ interruptible_sleep_on_timeout(&wait_queue_mibdaemon, ((MIB_INTERVAL-i)/(1000/HZ)));
+ i=0;
+ if(showtime==1){
+// printk("\n\n update mib");
+
+ do_gettimeofday(&time_now);
+ if(time_now.tv_sec - current_intvl->start_time.tv_sec>=900){
+ if(current_intvl->list.next!=&interval_list){
+ current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
+ do_gettimeofday(&(current_intvl->start_time));
+ }
+ else{
+ mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list);
+ list_del(interval_list.next);
+ memset(mib_ptr, 0, sizeof(amazon_mei_mib));
+ list_add_tail(&(mib_ptr->list), &interval_list);
+ if(current_intvl->list.next==&interval_list)
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nlink list error");
+#endif
+ current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
+ do_gettimeofday(&(current_intvl->start_time));
+ }
+ }
+
+ if(down_interruptible(&mei_sema))
+ return -ERESTARTSYS;
+/*
+ ATUC_PERF_LO_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 0 Index 0");
+#endif
+ }
+ else{
+ if(RxMessage[4]&PLAM_LOS_FailureBit){
+ current_intvl->AtucPerfLos++;
+ ATUC_PERF_LOSS++;
+ CurrStatus.adslAtucCurrStatus = 2;
+ }
+ if(RxMessage[4]&PLAM_LOF_FailureBit){
+ current_intvl->AtucPerfLof++;
+ ATUC_PERF_LOFS++;
+ CurrStatus.adslAtucCurrStatus = 1;
+ }
+ if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit)))
+ CurrStatus.adslAtucCurrStatus = 0;
+ }
+*/
+
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUC_PERF_ESS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 7 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS;
+ if(temp>=0){
+ current_intvl->AtucPerfEs+=temp;
+ ATUC_PERF_ESS+=temp;
+ mib_pread.ATUC_PERF_ESS = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
+ ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
+ mib_pread.ATUC_PERF_ESS = RxMessage[4];
+ }
+ }
+/*
+ ATUR_PERF_LO_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 1 Index 0");
+#endif
+ }
+ else{
+ if(RxMessage[4]&PLAM_LOS_FailureBit){
+ current_intvl->AturPerfLos++;
+ ATUR_PERF_LOSS++;
+ CurrStatus.adslAturCurrStatus = 2;
+ }
+ if(RxMessage[4]&PLAM_LOF_FailureBit){
+ current_intvl->AturPerfLof++;
+ ATUR_PERF_LOFS++;
+ CurrStatus.adslAturCurrStatus = 1;
+ }
+ if(RxMessage[4]&PLAM_LPR_FailureBit){
+ current_intvl->AturPerfLpr++;
+ ATUR_PERF_LPR++;
+ CurrStatus.adslAturCurrStatus = 3;
+ }
+ if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit)))
+ CurrStatus.adslAturCurrStatus = 0;
+ }
+*/
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUR_PERF_ESS_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 33 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS;
+ if(temp>=0){
+ current_intvl->AturPerfEs+=temp;
+ ATUR_PERF_ESS+=temp;
+ mib_pread.ATUR_PERF_ESS = RxMessage[4];
+ }
+ else{
+ current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
+ ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
+ mib_pread.ATUR_PERF_ESS=RxMessage[4];
+ }
+ }
+ if(showtime!=1)
+ goto mib_poll_end;
+ // to update rx/tx blocks
+ ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 20 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4];
+ }
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 21 Index 0");
+#endif
+ }
+ else{
+ temp2 = RxMessage[4];
+ }
+ if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){
+ current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
+ ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
+ mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
+ }
+ else{
+ current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
+ ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
+ mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
+ }
+ current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk;
+ ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK;
+/*
+ ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
+ printk("\n\nCMV fail, Group 7 Address 20 Index 0");
+ else{
+ if(RxMessage[4]){
+ current_intvl->AturChanPerfTxBlk+=RxMessage[4];
+ ATUR_CHAN_TX_BLK+=RxMessage[4];
+ }
+ }
+ ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
+ printk("\n\nCMV fail, Group 7 Address 21 Index 0");
+ else{
+ if(RxMessage[4]){
+ current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16);
+ ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16);
+ }
+ }
+*/
+ if(chantype.interleave == 1){
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 3 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL;
+ if(temp>=0){
+ current_intvl->AturChanPerfCorrBlk+=temp;
+ ATUR_CHAN_CORR_BLK+=temp;
+ mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
+ }
+ else{
+ current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
+ ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
+ mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
+ }
+ }
+ }
+ else if(chantype.fast == 1){
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 3 Index 1");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST;
+ if(temp>=0){
+ current_intvl->AturChanPerfCorrBlk+=temp;
+ ATUR_CHAN_CORR_BLK+=temp;
+ mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
+ }
+ else{
+ current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
+ ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
+ mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
+ }
+ }
+ }
+
+ if(chantype.interleave == 1){
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 2 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL;
+ if(temp>=0){
+ current_intvl->AturChanPerfUncorrBlk+=temp;
+ ATUR_CHAN_UNCORR_BLK+=temp;
+ mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
+ }
+ else{
+ current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
+ ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
+ mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
+ }
+ }
+ }
+ else if(chantype.fast == 1){
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 2 Index 1");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST;
+ if(temp>=0){
+ current_intvl->AturChanPerfUncorrBlk+=temp;
+ ATUR_CHAN_UNCORR_BLK+=temp;
+ mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
+ }
+ else{
+ current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
+ ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
+ mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
+ }
+ }
+ }
+
+ //RFC-3440
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //???
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 0 Address 0 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR;
+ if(temp>=0){
+ current_intvl->AtucPerfStatFastR+=temp;
+ ATUC_PERF_STAT_FASTR+=temp;
+ mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
+ ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
+ mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
+ }
+ }
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //???
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 0 Address 0 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR;
+ if(temp>=0){
+ current_intvl->AtucPerfStatFailedFastR+=temp;
+ ATUC_PERF_STAT_FAILED_FASTR+=temp;
+ mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
+ ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
+ mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
+ }
+ }
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUC_PERF_STAT_SESL_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 8 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL;
+ if(temp>=0){
+ current_intvl->AtucPerfStatSesL+=temp;
+ ATUC_PERF_STAT_SESL+=temp;
+ mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
+ ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
+ mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
+ }
+ }
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUC_PERF_STAT_UASL_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 10 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL;
+ if(temp>=0){
+ current_intvl->AtucPerfStatUasL+=temp;
+ ATUC_PERF_STAT_UASL+=temp;
+ mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
+ ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
+ mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
+ }
+ }
+ if(showtime!=1)
+ goto mib_poll_end;
+ ATUR_PERF_STAT_SESL_FLAG_MAKECMV;
+ if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
+#ifdef AMAZON_MEI_DEBUG_ON
+ printk("\n\nCMV fail, Group 7 Address 34 Index 0");
+#endif
+ }
+ else{
+ temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL;
+ if(temp>=0){
+ current_intvl->AtucPerfStatUasL+=temp;
+ ATUC_PERF_STAT_UASL+=temp;
+ mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
+ }
+ else{
+ current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
+ ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
+ mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
+ }
+ }
+
+#endif
+mib_poll_end:
+ up(&mei_sema);
+
+ do_gettimeofday(&time_fini);
+ i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec
+ }//showtime==1
+ }
+
+}
+int mib_poll_init(void)
+{
+ printk("Starting mib_poll...\n");
+
+ kernel_thread(adsl_mib_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
+ return 0;
+}
+#endif //IFX_SMALL_FOOTPRINT
+//EXPORT_NO_SYMBOLS;
+
+#ifdef ADSL_LED_SUPPORT
+// adsl led -start
+int led_status_on=0,led_need_to_flash=0;
+int led_current_flashing=0;
+unsigned long led_delay=0;
+static int led_poll(void *unused)
+{
+ stop_led_module=0; //begin polling ...
+ while(!stop_led_module){
+ if ((!led_status_on)&&(!led_need_to_flash)) interruptible_sleep_on_timeout (&wait_queue_led_polling,1000); //10 seconds timeout for waiting wakeup
+// else printk("direct running task, no waiting");
+ run_task_queue(&tq_ifx_led);//joelin task
+// printk("led and LOP polling...\n");
+ }
+ return 0;
+}
+static int led_poll_init(void)
+{
+// printk("Starting adsl led polling...\n");
+
+//warning-led-start
+// CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
+//warning-led-end
+
+ kernel_thread(led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
+ return 0;
+}
+
+int adsl_led_flash(void)
+{
+ int i;
+ if (!firmware_support_led) return 0; //joelin version check
+
+ if (led_status_on == 0 && led_need_to_flash == 0)
+ {
+ queue_task(&led_task, &tq_ifx_led);//joelin task
+ wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module
+// printk("queue Task 1...\n"); //joelin test
+ }
+ led_need_to_flash=1;//asking to flash led
+
+ return 0;
+}
+
+int adsl_led_flash_task(void *ptr)
+{
+
+ u16 one=1;
+ u16 zero=0;
+ u16 data=0x0600;
+ int kernel_use=1;
+ u16 CMVMSG[MSG_LENGTH];
+//adsl-led-start for >v1.1.2.7.1.1
+// printk("Task Running...\n"); //joelin test
+ if ((firmware_support_led==2)&&(led_support_check))
+ {
+ led_support_check=0;
+ data=0x0600;
+ makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &data,CMVMSG); //configure GPIO9 GPIO10 as outputs
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+
+ makeCMV_local(H2D_CMV_WRITE, INFO, 91, 2, 1, &data,CMVMSG); //enable writing to bit 9 and bit10
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+
+ data=0x0a01;
+ makeCMV_local(H2D_CMV_WRITE, INFO, 91, 4, 1, &data,CMVMSG); //use GPIO10 for TR68 .Enable and don't invert.
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+
+#ifdef DATA_LED_ON_MODE
+ data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on.
+#else
+ data=0x0900;
+#endif
+ makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .turn off.
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
+
+ }
+ if (!showtime) {led_need_to_flash=0; return 0;}
+//adsl-led-end for >v1.1.2.7.1.1
+
+ if (led_status_on == 0 || led_need_to_flash == 1)
+ {
+
+ if (led_current_flashing==0)
+ {
+ if (firmware_support_led==1){//>1.1.2.3.1.1
+ makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &one,CMVMSG); //flash
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
+ }
+ else if (firmware_support_led==2){//>1.1.2.7.1.1
+ data=0x0901;//flash
+ makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .flash.
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
+
+ }//(firmware_support_led==2)
+ led_current_flashing = 1;//turn on led
+ }
+ led_status_on=1;
+
+ do{//do nothing , waiting untill no data traffic
+ led_need_to_flash=0;
+ interruptible_sleep_on_timeout(&wait_queue_led, 25); //the time for LED Off , if no data traffic
+ }while(led_need_to_flash==1);
+
+ }else if (led_status_on == 1 && led_need_to_flash==0)
+ {
+ if (led_current_flashing==1)
+ {//turn off led
+ if (firmware_support_led==1){//>1.1.2.3.1.1
+ makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &zero,CMVMSG);//off
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
+ } //>1.1.2.3.1.1
+ else if (firmware_support_led==2){//>1.1.2.7.1.1
+#ifdef DATA_LED_ON_MODE
+ data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on.
+#else
+ data=0x0900;//off
+#endif
+ makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .off.
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
+
+ }//(firmware_support_led==2)
+ led_status_on=0;
+ led_current_flashing = 0;
+ }
+ }
+
+ if (led_status_on == 1 || led_need_to_flash)
+ {//led flash job on going or led need to flash
+ queue_task(&led_task, &tq_ifx_led); //joelin task
+// printk("queue Task 2...\n"); //joelin test
+ }
+ return 0;
+}
+//joelin adsl led-end
+#else
+int adsl_led_flash(void)
+{
+ return 0;
+}
+#endif //ADSL_LED_SUPPORT
+#ifdef IFX_DYING_GASP
+static int lop_poll(void *unused)
+{
+
+ while(1)
+ {
+ interruptible_sleep_on_timeout(&wait_queue_dying_gasp, 1);
+#ifdef CONFIG_CPU_AMAZON_E //000003:fchang
+ if(showtime&&((*((volatile u32 *)0xB0100B14))&0x4)==0x0) {//000003:fchang
+#else //000003:fchang
+ if(showtime&&((*((volatile u32 *)0xB0100B44))&0x8000)==0x0) {
+#endif //CONFIG_CPU_AMAZON_E
+ mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_WRITEDEBUG, &lop_debugwr);
+ printk("send dying gasp..\n");}
+
+ }
+ return 0;
+ }
+static int lop_poll_init(void)
+{
+// printk("Starting LOP polling...\n");
+ kernel_thread(lop_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
+ return 0;
+}
+
+#endif //IFX_DYING_GASP
+
+//joelin 04/16/2005-satrt
+static int unavailable_seconds_poll(void *unused)
+{
+ while(1){
+ interruptible_sleep_on_timeout (&wait_queue_uas_poll,100); //1 second timeout for waiting wakeup
+ if (!showtime) unavailable_seconds++;
+ }
+ return 0;
+}
+static int unavailable_seconds_poll_init(void)
+{
+
+ kernel_thread(unavailable_seconds_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
+ return 0;
+}
+
+
+//joelin 04/16/2005-end
+EXPORT_SYMBOL(meiDebugWrite);
+EXPORT_SYMBOL(ifx_pop_eoc);
+
+MODULE_LICENSE("GPL");
+
+module_init(amazon_mei_init_module);
+module_exit(amazon_mei_cleanup_module);
+
diff --git a/target/linux/amazon/files/drivers/char/ifx_ssc.c b/target/linux/amazon/files/drivers/char/ifx_ssc.c
new file mode 100644
index 0000000..ea01659
--- /dev/null
+++ b/target/linux/amazon/files/drivers/char/ifx_ssc.c
@@ -0,0 +1,2121 @@
+/**************************************************
+ *
+ * drivers/ifx/serial/ifx_ssc.c
+ *
+ * Driver for IFX_SSC serial ports
+ *
+ * Copyright (C) 2004 Infineon Technologies AG
+ * Author Michael Schoenenborn (IFX COM TI BT)
+ *
+ */
+#define IFX_SSC_DRV_VERSION "0.2.1"
+/*
+ **************************************************
+ *
+ * This driver was originally based on the INCA-IP driver, but due to
+ * fundamental conceptual drawbacks there has been changed a lot.
+ *
+ * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn <gj@denx.de>
+ * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+// ### TO DO: general issues:
+// - power management
+// - interrupt handling (direct/indirect)
+// - pin/mux-handling (just overall concept due to project dependency)
+// - multiple instances capability
+// - slave functionality
+
+/*
+ * Include section
+ */
+#ifndef EXPORT_SYMTAB
+#define EXPORT_SYMTAB
+#endif
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+//#include <linux/poll.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/ifx_ssc_defines.h>
+#include <asm/amazon/ifx_ssc.h>
+
+#ifdef SSC_FRAME_INT_ENABLE
+#undef SSC_FRAME_INT_ENABLE
+#endif
+
+#define not_yet
+
+#define SPI_VINETIC
+
+/*
+ * Deal with CONFIG_MODVERSIONS
+ */
+#if CONFIG_MODVERSIONS==1
+# include <linux/modversions.h>
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Schoenenborn");
+MODULE_DESCRIPTION("IFX SSC driver");
+MODULE_SUPPORTED_DEVICE("ifx_ssc");
+MODULE_PARM(maj, "i");
+MODULE_PARM_DESC(maj, "Major device number");
+
+/* allow the user to set the major device number */
+static int maj = 0;
+
+
+/*
+ * This is the per-channel data structure containing pointers, flags
+ * and variables for the port. This driver supports a maximum of PORT_CNT.
+ * isp is allocated in ifx_ssc_init() based on the chip version.
+ */
+static struct ifx_ssc_port *isp;
+
+/* prototypes for fops */
+static ssize_t ifx_ssc_read(struct file *, char *, size_t, loff_t *);
+static ssize_t ifx_ssc_write(struct file *, const char *, size_t, loff_t *);
+//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *);
+int ifx_ssc_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+int ifx_ssc_open(struct inode *, struct file *);
+int ifx_ssc_close(struct inode *, struct file *);
+
+/* other forward declarations */
+static unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info);
+static void ifx_ssc_rx_int(int, void *, struct pt_regs *);
+static void ifx_ssc_tx_int(int, void *, struct pt_regs *);
+static void ifx_ssc_err_int(int, void *, struct pt_regs *);
+#ifdef SSC_FRAME_INT_ENABLE
+static void ifx_ssc_frm_int(int, void *, struct pt_regs *);
+#endif
+static void tx_int(struct ifx_ssc_port *);
+static int ifx_ssc1_read_proc(char *, char **, off_t, int, int *, void *);
+static void ifx_gpio_init(void);
+/************************************************************************
+ * Function declaration
+ ************************************************************************/
+//interrupt.c
+extern unsigned int amazon_get_fpi_hz(void);
+extern void disable_amazon_irq(unsigned int irq_nr);
+extern void enable_amazon_irq(unsigned int irq_nr);
+extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
+
+
+/*****************************************************************/
+typedef struct {
+ int (*request)(unsigned int irq,
+ void (*handler)(int, void *, struct pt_regs *),
+ unsigned long irqflags,
+ const char * devname,
+ void *dev_id);
+ void (*free)(unsigned int irq, void *dev_id);
+ void (*enable)(unsigned int irq);
+ void (*disable)(unsigned int irq);
+ void (*clear)(unsigned int irq);
+} ifx_int_wrapper_t;
+
+static ifx_int_wrapper_t ifx_int_wrapper = {
+ request: request_irq, // IM action: enable int
+ free: free_irq, // IM action: disable int
+ enable: enable_amazon_irq,
+ disable: disable_amazon_irq,
+ clear: mask_and_ack_amazon_irq,
+ //end:
+};
+
+/* Fops-struct */
+static struct file_operations ifx_ssc_fops = {
+ owner: THIS_MODULE,
+ read: ifx_ssc_read, /* read */
+ write: ifx_ssc_write, /* write */
+// poll: ifx_ssc_poll, /* poll */
+ ioctl: ifx_ssc_ioctl, /* ioctl */
+ open: ifx_ssc_open, /* open */
+ release: ifx_ssc_close, /* release */
+};
+
+
+static inline unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info)
+{ // ATTENTION: This function assumes that the CLC register is set with the
+ // appropriate value for RMC.
+ unsigned int rmc;
+
+ rmc = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CLC) &
+ IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET;
+ if (rmc == 0){
+ printk("ifx_ssc_get_kernel_clk rmc==0 \n");
+ return (0);
+ }
+ return (amazon_get_fpi_hz() / rmc);
+}
+
+#ifndef not_yet
+#ifdef IFX_SSC_INT_USE_BH
+/*
+ * This routine is used by the interrupt handler to schedule
+ * processing in the software interrupt portion of the driver
+ * (also known as the "bottom half"). This can be called any
+ * number of times for any channel without harm.
+ */
+static inline void
+ifx_ssc_sched_event(struct ifx_ssc_port *info, int event)
+{
+ info->event |= 1 << event; /* remember what kind of event and who */
+ queue_task(&info->tqueue, &tq_cyclades); /* it belongs to */
+ mark_bh(CYCLADES_BH); /* then trigger event */
+} /* ifx_ssc_sched_event */
+
+
+/*
+ * This routine is used to handle the "bottom half" processing for the
+ * serial driver, known also the "software interrupt" processing.
+ * This processing is done at the kernel interrupt level, after the
+ * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
+ * is where time-consuming activities which can not be done in the
+ * interrupt driver proper are done; the interrupt driver schedules
+ * them using ifx_ssc_sched_event(), and they get done here.
+ *
+ * This is done through one level of indirection--the task queue.
+ * When a hardware interrupt service routine wants service by the
+ * driver's bottom half, it enqueues the appropriate tq_struct (one
+ * per port) to the tq_cyclades work queue and sets a request flag
+ * via mark_bh for processing that queue. When the time is right,
+ * do_ifx_ssc_bh is called (because of the mark_bh) and it requests
+ * that the work queue be processed.
+ *
+ * Although this may seem unwieldy, it gives the system a way to
+ * pass an argument (in this case the pointer to the ifx_ssc_port
+ * structure) to the bottom half of the driver. Previous kernels
+ * had to poll every port to see if that port needed servicing.
+ */
+static void
+do_ifx_ssc_bh(void)
+{
+ run_task_queue(&tq_cyclades);
+} /* do_ifx_ssc_bh */
+
+static void
+do_softint(void *private_)
+{
+ struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_;
+
+ if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) {
+ wake_up_interruptible(&info->open_wait);
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|
+ ASYNC_CALLOUT_ACTIVE);
+ }
+ if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) {
+ wake_up_interruptible(&info->open_wait);
+ }
+ if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) {
+ wake_up_interruptible(&info->delta_msr_wait);
+ }
+ if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) {
+ wake_up_interruptible(&tty->write_wait);
+ }
+#ifdef Z_WAKE
+ if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) {
+ wake_up_interruptible(&info->shutdown_wait);
+ }
+#endif
+} /* do_softint */
+#endif /* IFX_SSC_INT_USE_BH */
+#endif // not_yet
+
+inline static void
+rx_int(struct ifx_ssc_port *info)
+{
+ int fifo_fill_lev, bytes_in_buf, i;
+ unsigned long tmp_val;
+ unsigned long *tmp_ptr;
+ unsigned int rx_valid_cnt;
+ /* number of words waiting in the RX FIFO */
+ fifo_fill_lev = (READ_PERIPHERAL_REGISTER(info->mapbase +
+ IFX_SSC_FSTAT) &
+ IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >>
+ IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET;
+ // Note: There are always 32 bits in a fifo-entry except for the last
+ // word of a contigous transfer block and except for not in rx-only
+ // mode and CON.ENBV set. But for this case it should be a convention
+ // in software which helps:
+ // In tx or rx/tx mode all transfers from the buffer to the FIFO are
+ // 32-bit wide, except for the last three bytes, which could be a
+ // combination of 16- and 8-bit access.
+ // => The whole block is received as 32-bit words as a contigous stream,
+ // even if there was a gap in tx which has the fifo run out of data!
+ // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)!
+
+ /* free space in the RX buffer */
+ bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr;
+ // transfer with 32 bits per entry
+ while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) {
+ tmp_ptr = (unsigned long *)info->rxbuf_ptr;
+ *tmp_ptr = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB);
+ info->rxbuf_ptr += 4;
+ info->stats.rxBytes += 4;
+ fifo_fill_lev --;
+ bytes_in_buf -= 4;
+ } // while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0))
+ // now do the rest as mentioned in STATE.RXBV
+ while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) {
+ rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) &
+ IFX_SSC_STATE_RX_BYTE_VALID_MASK) >>
+ IFX_SSC_STATE_RX_BYTE_VALID_OFFSET;
+ if (rx_valid_cnt == 0) break;
+ if (rx_valid_cnt > bytes_in_buf) {
+ // ### TO DO: warning message: not block aligned data, other data
+ // in this entry will be lost
+ rx_valid_cnt = bytes_in_buf;
+ }
+ tmp_val = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB);
+
+ for (i=0; i<rx_valid_cnt; i++) {
+ *info->rxbuf_ptr = (tmp_val >> ( 8 * (rx_valid_cnt - i-1))) & 0xff;
+/*
+ *info->rxbuf_ptr = tmp_val & 0xff;
+ tmp_val >>= 8;
+*/
+ bytes_in_buf--;
+
+
+ info->rxbuf_ptr++;
+ }
+ info->stats.rxBytes += rx_valid_cnt;
+ } // while ((bytes_in_buf > 0) && (fifo_fill_lev > 0))
+
+ // check if transfer is complete
+ if (info->rxbuf_ptr >= info->rxbuf_end) {
+ ifx_int_wrapper.disable(info->rxirq);
+ /* wakeup any processes waiting in read() */
+ wake_up_interruptible(&info->rwait);
+ /* and in poll() */
+ //wake_up_interruptible(&info->pwait);
+ } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) &&
+ (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) == 0)) {
+ // if buffer not filled completely and rx request done initiate new transfer
+/*
+ if (info->rxbuf_end - info->rxbuf_ptr < 65536)
+*/
+ if (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE)
+ WRITE_PERIPHERAL_REGISTER((info->rxbuf_end - info->rxbuf_ptr) <<
+ IFX_SSC_RXREQ_RXCOUNT_OFFSET,
+ info->mapbase + IFX_SSC_RXREQ);
+ else
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
+ info->mapbase + IFX_SSC_RXREQ);
+ }
+} // rx_int
+
+inline static void
+tx_int(struct ifx_ssc_port *info)
+{
+
+ int fifo_space, fill, i;
+ fifo_space = ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_ID) &
+ IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) -
+ ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_FSTAT) &
+ IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >>
+ IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET);
+
+ if (fifo_space == 0)
+ return;
+
+ fill = info->txbuf_end - info->txbuf_ptr;
+
+ if (fill > fifo_space * 4)
+ fill = fifo_space * 4;
+
+ for (i = 0; i < fill / 4; i++) {
+ // at first 32 bit access
+ WRITE_PERIPHERAL_REGISTER(*(UINT32 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
+ info->txbuf_ptr += 4;
+ }
+
+ fifo_space -= fill / 4;
+ info->stats.txBytes += fill & ~0x3;
+ fill &= 0x3;
+ if ((fifo_space > 0) & (fill > 1)) {
+ // trailing 16 bit access
+ WRITE_PERIPHERAL_REGISTER_16(*(UINT16 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
+ info->txbuf_ptr += 2;
+ info->stats.txBytes += 2;
+ fifo_space --;
+/* added by bingtao */
+ fill -=2;
+ }
+ if ((fifo_space > 0) & (fill > 0)) {
+ // trailing 8 bit access
+ WRITE_PERIPHERAL_REGISTER_8(*(UINT8 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
+ info->txbuf_ptr ++;
+ info->stats.txBytes ++;
+/*
+ fifo_space --;
+*/
+ }
+
+ // check if transmission complete
+ if (info->txbuf_ptr >= info->txbuf_end) {
+ ifx_int_wrapper.disable(info->txirq);
+ kfree(info->txbuf);
+ info->txbuf = NULL;
+ /* wake up any process waiting in poll() */
+ //wake_up_interruptible(&info->pwait);
+ }
+
+} // tx_int
+
+static void
+ifx_ssc_rx_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
+ //WRITE_PERIPHERAL_REGISTER(IFX_SSC_R_BIT, info->mapbase + IFX_SSC_IRN_CR);
+ rx_int(info);
+}
+
+static void
+ifx_ssc_tx_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
+ //WRITE_PERIPHERAL_REGISTER(IFX_SSC_T_BIT, info->mapbase + IFX_SSC_IRN_CR);
+ tx_int(info);
+}
+
+static void
+ifx_ssc_err_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
+ unsigned int state;
+ unsigned int write_back = 0;
+ unsigned long flags;
+
+
+ local_irq_save(flags);
+ state = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE);
+
+ if ((state & IFX_SSC_STATE_RX_UFL) != 0) {
+ info->stats.rxUnErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR;
+ }
+ if ((state & IFX_SSC_STATE_RX_OFL) != 0) {
+ info->stats.rxOvErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR;
+ }
+ if ((state & IFX_SSC_STATE_TX_OFL) != 0) {
+ info->stats.txOvErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR;
+ }
+ if ((state & IFX_SSC_STATE_TX_UFL) != 0) {
+ info->stats.txUnErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR;
+ }
+// if ((state & IFX_SSC_STATE_ABORT_ERR) != 0) {
+// info->stats.abortErr++;
+// write_back |= IFX_SSC_WHBSTATE_CLR_ABORT_ERROR;
+// }
+ if ((state & IFX_SSC_STATE_MODE_ERR) != 0) {
+ info->stats.modeErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR;
+ }
+
+ if (write_back)
+ WRITE_PERIPHERAL_REGISTER(write_back,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+ local_irq_restore(flags);
+}
+
+#ifdef SSC_FRAME_INT_ENABLE
+static void
+ifx_ssc_frm_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ // ### TO DO: wake up framing wait-queue in conjunction with batch execution
+}
+#endif
+
+static void
+ifx_ssc_abort(struct ifx_ssc_port *info)
+{
+ unsigned long flags;
+ bool enabled;
+
+ local_irq_save(flags);
+
+ // disable all int's
+ ifx_int_wrapper.disable(info->rxirq);
+ ifx_int_wrapper.disable(info->txirq);
+ ifx_int_wrapper.disable(info->errirq);
+/*
+ ifx_int_wrapper.disable(info->frmirq);
+*/
+ local_irq_restore(flags);
+
+ // disable SSC (also aborts a receive request!)
+ // ### TO DO: Perhaps it's better to abort after the receiption of a
+ // complete word. The disable cuts the transmission immediatly and
+ // releases the chip selects. This could result in unpredictable
+ // behavior of connected external devices!
+ enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
+ & IFX_SSC_STATE_IS_ENABLED) != 0;
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+
+ // flush fifos
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH,
+ info->mapbase + IFX_SSC_TXFCON);
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH,
+ info->mapbase + IFX_SSC_RXFCON);
+
+ // free txbuf
+ if (info->txbuf != NULL) {
+ kfree(info->txbuf);
+ info->txbuf = NULL;
+ }
+
+ // wakeup read process
+ if (info->rxbuf != NULL)
+ wake_up_interruptible(&info->rwait);
+
+ // clear pending int's
+ ifx_int_wrapper.clear(info->rxirq);
+ ifx_int_wrapper.clear(info->txirq);
+ ifx_int_wrapper.clear(info->errirq);
+/*
+ ifx_int_wrapper.clear(info->frmirq);
+*/
+
+ // clear error flags
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+ //printk("IFX SSC%d: Transmission aborted\n", info->port_nr);
+ // enable SSC
+ if (enabled)
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+} // ifx_ssc_abort
+
+
+/*
+ * This routine is called whenever a port is opened. It enforces
+ * exclusive opening of a port and enables interrupts, etc.
+ */
+int
+ifx_ssc_open(struct inode *inode, struct file * filp)
+{
+ struct ifx_ssc_port *info;
+ int line;
+ int from_kernel = 0;
+
+ if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) {
+ from_kernel = 1;
+ line = (int)inode;
+ }
+ else {
+ line = MINOR(filp->f_dentry->d_inode->i_rdev);
+ filp->f_op = &ifx_ssc_fops;
+ }
+
+ /* don't open more minor devices than we can support */
+ if (line < 0 || line >= PORT_CNT)
+ return -ENXIO;
+
+ info = &isp[line];
+
+ /* exclusive open */
+ if (info->port_is_open != 0)
+ return -EBUSY;
+ info->port_is_open++;
+
+ ifx_int_wrapper.disable(info->rxirq);
+ ifx_int_wrapper.disable(info->txirq);
+ ifx_int_wrapper.disable(info->errirq);
+/*
+ ifx_int_wrapper.disable(info->frmirq);
+*/
+
+ /* Flush and enable TX/RX FIFO */
+ WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL <<
+ IFX_SSC_XFCON_ITL_OFFSET) |
+ IFX_SSC_XFCON_FIFO_FLUSH |
+ IFX_SSC_XFCON_FIFO_ENABLE,
+ info->mapbase + IFX_SSC_TXFCON);
+ WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL <<
+ IFX_SSC_XFCON_ITL_OFFSET) |
+ IFX_SSC_XFCON_FIFO_FLUSH |
+ IFX_SSC_XFCON_FIFO_ENABLE,
+ info->mapbase + IFX_SSC_RXFCON);
+
+
+ /* logically flush the software FIFOs */
+ info->rxbuf_ptr = 0;
+ info->txbuf_ptr = 0;
+
+ /* clear all error bits */
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+ // clear pending interrupts
+ ifx_int_wrapper.clear(info->rxirq);
+ ifx_int_wrapper.clear(info->txirq);
+ ifx_int_wrapper.clear(info->errirq);
+/*
+ ifx_int_wrapper.clear(info->frmirq);
+*/
+
+ // enable SSC
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+ MOD_INC_USE_COUNT;
+
+ return 0;
+} /* ifx_ssc_open */
+EXPORT_SYMBOL(ifx_ssc_open);
+
+/*
+ * This routine is called when a particular device is closed.
+ */
+int
+ifx_ssc_close(struct inode *inode, struct file *filp)
+{
+ struct ifx_ssc_port *info;
+ int idx;
+
+ if ((inode == (struct inode *)0) || (inode == (struct inode *)1))
+ idx = (int)inode;
+ else
+ idx = MINOR(filp->f_dentry->d_inode->i_rdev);
+
+ if (idx < 0 || idx >= PORT_CNT)
+ return -ENXIO;
+
+ info = &isp[idx];
+ if (!info)
+ return -ENXIO;
+
+ // disable SSC
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+ // call abort function to disable int's, flush fifos...
+ ifx_ssc_abort(info);
+
+ info->port_is_open --;
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+} /* ifx_ssc_close */
+EXPORT_SYMBOL(ifx_ssc_close);
+
+/* added by bingtao */
+/* helper routine to handle reads from the kernel or user-space */
+/* info->rxbuf : never kfree and contains valid data */
+/* should be points to NULL after copying data !!! */
+static ssize_t
+ifx_ssc_read_helper_poll(struct ifx_ssc_port *info, char *buf, size_t len,
+ int from_kernel)
+{
+ ssize_t ret_val;
+ unsigned long flags;
+
+ if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
+ return -EFAULT;
+ local_irq_save(flags);
+ info->rxbuf_ptr = info->rxbuf;
+ info->rxbuf_end = info->rxbuf + len;
+ local_irq_restore(flags);
+/* Vinetic driver always works in IFX_SSC_MODE_RXTX */
+/* TXRX in poll mode */
+ while (info->rxbuf_ptr < info->rxbuf_end){
+/* This is the key point, if you don't check this condition
+ kfree (NULL) will happen
+ because tx only need write into FIFO, it's much fast than rx
+ So when rx still waiting , tx already finish and release buf
+*/
+ if (info->txbuf_ptr < info->txbuf_end) {
+ tx_int(info);
+ }
+
+ rx_int(info);
+ };
+
+ ret_val = info->rxbuf_ptr - info->rxbuf;
+ return (ret_val);
+} // ifx_ssc_read_helper_poll
+
+/* helper routine to handle reads from the kernel or user-space */
+/* info->rx_buf : never kfree and contains valid data */
+/* should be points to NULL after copying data !!! */
+static ssize_t
+ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len,
+ int from_kernel)
+{
+ ssize_t ret_val;
+ unsigned long flags;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
+ return -EFAULT;
+ local_irq_save(flags);
+ info->rxbuf_ptr = info->rxbuf;
+ info->rxbuf_end = info->rxbuf + len;
+ if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
+ if ((info->txbuf == NULL) ||
+ (info->txbuf != info->txbuf_ptr) ||
+ (info->txbuf_end != len + info->txbuf)) {
+ local_irq_restore(flags);
+ printk("IFX SSC - %s: write must be called before calling "
+ "read in combined RX/TX!\n", __FUNCTION__);
+ return -EFAULT;
+ }
+ local_irq_restore(flags);
+ /* should enable tx, right?*/
+ tx_int(info);
+ if (info->txbuf_ptr < info->txbuf_end){
+ ifx_int_wrapper.enable(info->txirq);
+ }
+
+ ifx_int_wrapper.enable(info->rxirq);
+ } else { // rx mode
+ local_irq_restore(flags);
+ if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) &
+ IFX_SSC_RXCNT_TODO_MASK)
+ return -EBUSY;
+ ifx_int_wrapper.enable(info->rxirq);
+ // rx request limited to ' bytes
+/*
+ if (len < 65536)
+*/
+ if (len < IFX_SSC_RXREQ_BLOCK_SIZE)
+ WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
+ info->mapbase + IFX_SSC_RXREQ);
+ else
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
+ info->mapbase + IFX_SSC_RXREQ);
+ }
+
+ __add_wait_queue(&info->rwait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ // wakeup done in rx_int
+
+ do {
+ local_irq_save(flags);
+ if (info->rxbuf_ptr >= info->rxbuf_end)
+ break;
+ local_irq_restore(flags);
+
+// if (filp->f_flags & O_NONBLOCK)
+// {
+// N = -EAGAIN;
+// goto out;
+// }
+ if (signal_pending(current)) {
+ ret_val = -ERESTARTSYS;
+ goto out;
+ }
+ schedule();
+ } while (1);
+
+ ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len
+ local_irq_restore(flags);
+
+ out:
+ current->state = TASK_RUNNING;
+ __remove_wait_queue(&info->rwait, &wait);
+ return (ret_val);
+} // ifx_ssc_read_helper
+
+
+#if 0
+/* helper routine to handle reads from the kernel or user-space */
+/* appropriate in interrupt context */
+static ssize_t
+ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len,
+ int from_kernel)
+{
+ ssize_t ret_val;
+ unsigned long flags;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
+ return -EFAULT;
+ local_irq_save(flags);
+ info->rxbuf_ptr = info->rxbuf;
+ info->rxbuf_end = info->rxbuf + len;
+ if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
+ if ((info->txbuf == NULL) ||
+ (info->txbuf != info->txbuf_ptr) ||
+ (info->txbuf_end != len + info->txbuf)) {
+ local_irq_restore(flags);
+ printk("IFX SSC - %s: write must be called before calling "
+ "read in combined RX/TX!\n", __FUNCTION__);
+ return -EFAULT;
+ }
+ local_irq_restore(flags);
+ /* should enable tx, right?*/
+ tx_int(info);
+ if (!in_irq()){
+ if (info->txbuf_ptr < info->txbuf_end){
+ ifx_int_wrapper.enable(info->txirq);
+ }
+ ifx_int_wrapper.enable(info->rxirq);
+ }
+ } else { // rx mode
+ local_irq_restore(flags);
+ if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) &
+ IFX_SSC_RXCNT_TODO_MASK)
+ return -EBUSY;
+ if (!in_irq()){
+ ifx_int_wrapper.enable(info->rxirq);
+ }
+
+ if (len < IFX_SSC_RXREQ_BLOCK_SIZE)
+ WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
+ info->mapbase + IFX_SSC_RXREQ);
+ else
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
+ info->mapbase + IFX_SSC_RXREQ);
+ }
+ if (in_irq()){
+ do {
+ rx_int(info);
+ if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
+ tx_int(info);
+ }
+
+ if (info->rxbuf_ptr >= info->rxbuf_end)
+ break;
+ } while (1);
+ ret_val = info->rxbuf_ptr - info->rxbuf;
+ }else{
+ __add_wait_queue(&info->rwait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ // wakeup done in rx_int
+
+ do {
+ local_irq_save(flags);
+ if (info->rxbuf_ptr >= info->rxbuf_end)
+ break;
+ local_irq_restore(flags);
+
+ if (signal_pending(current)) {
+ ret_val = -ERESTARTSYS;
+ goto out;
+ }
+ schedule();
+ } while (1);
+
+ ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len
+ local_irq_restore(flags);
+
+ out:
+ current->state = TASK_RUNNING;
+ __remove_wait_queue(&info->rwait, &wait);
+ }
+ return (ret_val);
+} // ifx_ssc_read_helper
+#endif
+
+/* helper routine to handle writes to the kernel or user-space */
+/* info->txbuf has two cases:
+ * 1) return value < 0 (-EFAULT), not touched at all
+ * 2) kfree and points to NULL in interrupt routine (but maybe later )
+ */
+static ssize_t
+ifx_ssc_write_helper(struct ifx_ssc_port *info, const char *buf,
+ size_t len, int from_kernel)
+{
+ // check if in tx or tx/rx mode
+ if (info->opts.modeRxTx == IFX_SSC_MODE_RX)
+ return -EFAULT;
+
+ info->txbuf_ptr = info->txbuf;
+ info->txbuf_end = len + info->txbuf;
+ /* start the transmission (not in rx/tx, see read helper) */
+ if (info->opts.modeRxTx == IFX_SSC_MODE_TX) {
+ tx_int(info);
+ if (info->txbuf_ptr < info->txbuf_end){
+ ifx_int_wrapper.enable(info->txirq);
+ }
+ }
+ //local_irq_restore(flags);
+ return len;
+}
+
+/*
+ * kernel interfaces for read and write.
+ * The caller must set port to: n for SSC<m> with n=m-1 (e.g. n=0 for SSC1)
+ */
+ssize_t
+ifx_ssc_kread(int port, char *kbuf, size_t len)
+{
+ struct ifx_ssc_port *info;
+ ssize_t ret_val;
+
+ if (port < 0 || port >= PORT_CNT)
+ return -ENXIO;
+
+ if (len == 0)
+ return 0;
+
+ info = &isp[port];
+
+ // check if reception in progress
+ if (info->rxbuf != NULL){
+ printk("SSC device busy\n");
+ return -EBUSY;
+ }
+
+ info->rxbuf = kbuf;
+ if (info->rxbuf == NULL){
+ printk("SSC device error\n");
+ return -EINVAL;
+ }
+
+/* changed by bingtao */
+ /* change by TaiCheng */
+ //if (!in_irq()){
+ if (0){
+ ret_val = ifx_ssc_read_helper(info, kbuf, len, 1);
+ }else{
+ ret_val = ifx_ssc_read_helper_poll(info, kbuf, len, 1);
+ };
+ info->rxbuf = NULL;
+
+ // ### TO DO: perhaps warn if ret_val != len
+ ifx_int_wrapper.disable(info->rxirq);
+
+ return (ret_val);
+} // ifx_ssc_kread
+EXPORT_SYMBOL(ifx_ssc_kread);
+
+ssize_t
+ifx_ssc_kwrite(int port, const char *kbuf, size_t len)
+{
+ struct ifx_ssc_port *info;
+ ssize_t ret_val;
+
+ if (port < 0 || port >= PORT_CNT)
+ return -ENXIO;
+
+ if (len == 0)
+ return 0;
+
+ info = &isp[port];
+
+ // check if transmission in progress
+ if (info->txbuf != NULL)
+ return -EBUSY;
+ info->txbuf = (char *)kbuf;
+
+ ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 1);
+ if (ret_val < 0){
+ info->txbuf = NULL;
+ }
+ return ret_val;
+}
+EXPORT_SYMBOL(ifx_ssc_kwrite);
+
+
+/*
+ * user interfaces to read and write
+ */
+static ssize_t
+ifx_ssc_read(struct file *filp, char *ubuf, size_t len, loff_t *off)
+{
+ ssize_t ret_val;
+ int idx;
+ struct ifx_ssc_port *info;
+
+/*
+ if (len == 0)
+ return (0);
+*/
+ idx = MINOR(filp->f_dentry->d_inode->i_rdev);
+ info = &isp[idx];
+
+ // check if reception in progress
+ if (info->rxbuf != NULL)
+ return -EBUSY;
+
+ info->rxbuf = kmalloc(len+ 3, GFP_KERNEL);
+ if (info->rxbuf == NULL)
+ return -ENOMEM;
+
+ ret_val = ifx_ssc_read_helper(info, info->rxbuf, len, 0);
+ // ### TO DO: perhaps warn if ret_val != len
+ if (copy_to_user((void*)ubuf, info->rxbuf, ret_val) != 0)
+ ret_val = -EFAULT;
+
+ ifx_int_wrapper.disable(info->rxirq);
+
+ kfree(info->rxbuf);
+ info->rxbuf = NULL;
+ return (ret_val);
+} // ifx_ssc_read
+
+/*
+ * As many bytes as we have free space for are copied from the user
+ * into txbuf and the actual byte count is returned. The transmission is
+ * always kicked off by calling the appropriate TX routine.
+ */
+static ssize_t
+ifx_ssc_write(struct file *filp, const char *ubuf, size_t len, loff_t *off)
+{
+ int idx;
+ struct ifx_ssc_port *info;
+ int ret_val;
+
+ if (len == 0)
+ return (0);
+
+ idx = MINOR(filp->f_dentry->d_inode->i_rdev);
+ info = &isp[idx];
+
+ // check if transmission in progress
+ if (info->txbuf != NULL)
+ return -EBUSY;
+
+ info->txbuf = kmalloc(len+ 3, GFP_KERNEL);
+ if (info->txbuf == NULL)
+ return -ENOMEM;
+
+ ret_val = copy_from_user(info->txbuf, ubuf, len);
+ if (ret_val == 0)
+ ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 0);
+ else
+ ret_val = -EFAULT;
+ if (ret_val < 0) {
+ kfree(info->txbuf); // otherwise will be done in ISR
+ info->txbuf = NULL;
+ }
+ return (ret_val);
+} /* ifx_ssc_write */
+
+
+/*
+ * ------------------------------------------------------------
+ * ifx_ssc_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ FUNC-NAME : ifx_ssc_frm_status_get
+ LONG-NAME : framing status get
+ PURPOSE : Get the actual status of the framing.
+
+ PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
+
+ RESULT : pointer to a structure ifx_ssc_frm_status which holds busy and
+ count values.
+
+ REMARKS : Returns a register value independent of framing is enabled or
+ not! Changes structure inside of info, so the return value isn't
+ needed at all, but could be used for simple access.
+-----------------------------------------------------------------------------*/
+static struct ifx_ssc_frm_status *
+ifx_ssc_frm_status_get(struct ifx_ssc_port *info)
+{
+ unsigned long tmp;
+
+ tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFSTAT);
+ info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0;
+ info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0;
+ info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK)
+ >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET;
+ info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK)
+ >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET;
+ tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON);
+ info->frm_status.EnIntAfterData =
+ (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0;
+ info->frm_status.EnIntAfterPause =
+ (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0;
+ return (&info->frm_status);
+} // ifx_ssc_frm_status_get
+
+
+/*-----------------------------------------------------------------------------
+ FUNC-NAME : ifx_ssc_frm_control_get
+ LONG-NAME : framing control get
+ PURPOSE : Get the actual control values of the framing.
+
+ PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
+
+ RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits
+ and count reload values.
+
+ REMARKS : Changes structure inside of info, so the return value isn't
+ needed at all, but could be used for simple access.
+-----------------------------------------------------------------------------*/
+static struct ifx_ssc_frm_opts *
+ifx_ssc_frm_control_get(struct ifx_ssc_port *info)
+{
+ unsigned long tmp;
+
+ tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON);
+ info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0;
+ info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK)
+ >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
+ info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
+ >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
+ info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK)
+ >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
+ info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK)
+ >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
+ info->frm_opts.StopAfterPause =
+ (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0;
+ return (&info->frm_opts);
+} // ifx_ssc_frm_control_get
+
+
+/*-----------------------------------------------------------------------------
+ FUNC-NAME : ifx_ssc_frm_control_set
+ LONG-NAME : framing control set
+ PURPOSE : Set the actual control values of the framing.
+
+ PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
+
+ RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits
+ and count reload values.
+
+ REMARKS :
+-----------------------------------------------------------------------------*/
+static int
+ifx_ssc_frm_control_set(struct ifx_ssc_port *info)
+{
+ unsigned long tmp;
+
+ // check parameters
+ if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX) ||
+ (info->frm_opts.DataLength < 1) ||
+ (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX) ||
+ (info->frm_opts.PauseLength < 1) ||
+ ((info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >>
+ IFX_SSC_SFCON_PAUSE_DATA_OFFSET)) != 0 ) ||
+ ((info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >>
+ IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)) != 0 ))
+ return -EINVAL;
+
+ // read interrupt bits (they're not changed here)
+ tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON) &
+ (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE |
+ IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE);
+
+ // set all values with respect to it's bit position (for data and pause
+ // length set N-1)
+ tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
+ tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
+ tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
+ tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
+ tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE;
+ tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE;
+
+ WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON);
+
+ return 0;
+} // ifx_ssc_frm_control_set
+
+
+/*-----------------------------------------------------------------------------
+ FUNC-NAME : ifx_ssc_rxtx_mode_set
+ LONG-NAME : rxtx mode set
+ PURPOSE : Set the transmission mode.
+
+ PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
+
+ RESULT : Returns error code
+
+ REMARKS : Assumes that SSC not used (SSC disabled, device not opened yet
+ or just closed)
+-----------------------------------------------------------------------------*/
+static int
+ifx_ssc_rxtx_mode_set(struct ifx_ssc_port *info, unsigned int val)
+{
+ unsigned long tmp;
+
+ // check parameters
+ if (!(info) || (val & ~(IFX_SSC_MODE_MASK)))
+ return -EINVAL;
+ /*check BUSY and RXCNT*/
+ if ( READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY
+ ||READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK)
+ return -EBUSY;
+ // modify
+ tmp = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) &
+ ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val);
+ WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_CON);
+ info->opts.modeRxTx = val;
+/*
+ printk(KERN_DEBUG "IFX SSC%d: Setting mode to %s%s\n",
+ info->port_nr,
+ ((val & IFX_SSC_CON_RX_OFF) == 0) ? "rx ":"",
+ ((val & IFX_SSC_CON_TX_OFF) == 0) ? "tx":"");
+*/
+ return 0;
+} // ifx_ssc_rxtx_mode_set
+
+void ifx_gpio_init(void)
+{
+ u32 temp;
+/* set gpio pin p0.10(SPI_DIN) p0.11(SPI_DOUT) p0.12(SPI_CLK) p0.13(SPI_CS2) direction */
+ temp = *(AMAZON_GPIO_P0_DIR) ;
+ temp &= 0xFFFFFBFF;
+ temp |= 0x3800;
+ *(AMAZON_GPIO_P0_DIR) = temp;
+/* set port 0 alternate select register 0 */
+ temp = *(AMAZON_GPIO_P0_ALTSEL0) ;
+ temp &= 0xFFFFC3FF;
+ temp |= 0x00001c00;
+ *(AMAZON_GPIO_P0_ALTSEL0) = temp;
+
+/* set port 0 alternate select register 1 */
+ temp = *(AMAZON_GPIO_P0_ALTSEL1) ;
+ temp &= 0xFFFFC3FF;
+ temp |= 0x00002000;
+ *(AMAZON_GPIO_P0_ALTSEL1) = temp;
+
+/* set port 0 open drain mode register */
+ temp = *(AMAZON_GPIO_P0_OD);
+ temp |= 0x00003800; /* set output pin normal mode */
+ *(AMAZON_GPIO_P0_OD)= temp;
+}
+
+/*
+ * This routine intializes the SSC appropriately depending
+ * on slave/master and full-/half-duplex mode.
+ * It assumes that the SSC is disabled and the fifo's and buffers
+ * are flushes later on.
+ */
+static int
+ifx_ssc_sethwopts(struct ifx_ssc_port *info)
+{
+ unsigned long flags, bits;
+ struct ifx_ssc_hwopts *opts = &info->opts;
+
+ /* sanity checks */
+ if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH) ||
+ (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH)) {
+ printk("%s: sanity check failed\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET;
+ bits |= IFX_SSC_CON_ENABLE_BYTE_VALID;
+// if (opts->abortErrDetect)
+// bits |= IFX_SSC_CON_ABORT_ERR_CHECK;
+ if (opts->rxOvErrDetect)
+ bits |= IFX_SSC_CON_RX_OFL_CHECK;
+ if (opts->rxUndErrDetect)
+ bits |= IFX_SSC_CON_RX_UFL_CHECK;
+ if (opts->txOvErrDetect)
+ bits |= IFX_SSC_CON_TX_OFL_CHECK;
+ if (opts->txUndErrDetect)
+ bits |= IFX_SSC_CON_TX_UFL_CHECK;
+ if (opts->loopBack)
+ bits |= IFX_SSC_CON_LOOPBACK_MODE;
+ if (opts->echoMode)
+ bits |= IFX_SSC_CON_ECHO_MODE_ON;
+ if (opts->headingControl)
+ bits |= IFX_SSC_CON_MSB_FIRST;
+ if (opts->clockPhase)
+ bits |= IFX_SSC_CON_LATCH_THEN_SHIFT;
+ if (opts->clockPolarity)
+ bits |= IFX_SSC_CON_CLOCK_FALL;
+ switch (opts->modeRxTx) {
+ case IFX_SSC_MODE_TX:
+ bits |= IFX_SSC_CON_RX_OFF;
+ break;
+ case IFX_SSC_MODE_RX:
+ bits |= IFX_SSC_CON_TX_OFF;
+ break;
+ } // switch (opts->modeRxT)
+ local_irq_save(flags);
+ WRITE_PERIPHERAL_REGISTER(bits, info->mapbase + IFX_SSC_CON);
+ WRITE_PERIPHERAL_REGISTER((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) |
+ (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS),
+ info->mapbase + IFX_SSC_GPOCON);
+ //master mode
+ if (opts->masterSelect){
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE);
+ }else{
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE);
+ }
+ // init serial framing
+ WRITE_PERIPHERAL_REGISTER(0, info->mapbase + IFX_SSC_SFCON);
+ /* set up the port pins */
+ //check for general requirements to switch (external) pad/pin characteristics
+ ifx_gpio_init();
+ local_irq_restore(flags);
+
+ return 0;
+} // ifx_ssc_sethwopts
+
+static int
+ifx_ssc_set_baud(struct ifx_ssc_port *info, unsigned int baud)
+{
+ unsigned int ifx_ssc_clock;
+ unsigned int br;
+ unsigned long flags;
+ bool enabled;
+
+ ifx_ssc_clock = ifx_ssc_get_kernel_clk(info);
+ if (ifx_ssc_clock ==0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+ /* have to disable the SSC to set the baudrate */
+ enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
+ & IFX_SSC_STATE_IS_ENABLED) != 0;
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+ // compute divider
+ br = ((ifx_ssc_clock >> 1)/baud) - 1;
+ asm("SYNC");
+ if (br > 0xffff ||
+ ((br == 0) &&
+ ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) &
+ IFX_SSC_STATE_IS_MASTER) == 0))){
+ local_irq_restore(flags);
+ printk("%s: illegal baudrate %u\n", __FUNCTION__, baud);
+ return -EINVAL;
+ }
+ WRITE_PERIPHERAL_REGISTER(br, info->mapbase + IFX_SSC_BR);
+ if (enabled)
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+ local_irq_restore(flags);
+ return 0;
+} // ifx_ssc_set_baud
+
+static int
+ifx_ssc_hwinit(struct ifx_ssc_port *info)
+{
+ unsigned long flags;
+ bool enabled;
+
+ /* have to disable the SSC */
+ enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
+ & IFX_SSC_STATE_IS_ENABLED) != 0;
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,
+ info->mapbase + IFX_SSC_WHBSTATE);
+
+ if (ifx_ssc_sethwopts(info) < 0)
+ {
+ printk("%s: setting the hardware options failed\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+
+ if (ifx_ssc_set_baud(info, info->baud) < 0) {
+ printk("%s: setting the baud rate failed\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ local_irq_save(flags);
+ /* TX FIFO */
+ WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL <<
+ IFX_SSC_XFCON_ITL_OFFSET) |
+ IFX_SSC_XFCON_FIFO_ENABLE,
+ info->mapbase + IFX_SSC_TXFCON);
+ /* RX FIFO */
+ WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL <<
+ IFX_SSC_XFCON_ITL_OFFSET) |
+ IFX_SSC_XFCON_FIFO_ENABLE,
+ info->mapbase + IFX_SSC_RXFCON);
+ local_irq_restore(flags);
+ if (enabled)
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE,
+ info->mapbase + IFX_SSC_WHBSTATE);
+ return 0;
+} // ifx_ssc_hwinit
+
+/*-----------------------------------------------------------------------------
+ FUNC-NAME : ifx_ssc_batch_exec
+ LONG-NAME :
+ PURPOSE :
+
+ PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
+
+ RESULT : Returns error code
+
+ REMARKS :
+-----------------------------------------------------------------------------*/
+static int
+ifx_ssc_batch_exec(struct ifx_ssc_port *info, struct ifx_ssc_batch_list *batch_anchor)
+{
+ // ### TO DO: implement user space batch execution
+ // first, copy the whole linked list from user to kernel space
+ // save some hardware options
+ // execute list
+ // restore hardware options if selected
+ return -EFAULT;
+} // ifx_ssc_batch_exec
+
+
+/*
+ * This routine allows the driver to implement device-
+ * specific ioctl's. If the ioctl number passed in cmd is
+ * not recognized by the driver, it should return ENOIOCTLCMD.
+ */
+int
+ifx_ssc_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+ unsigned long data)
+{
+ struct ifx_ssc_port *info;
+ int line, ret_val = 0;
+ unsigned long flags;
+ unsigned long tmp;
+ int from_kernel = 0;
+
+ if ((inode == (struct inode *)0) || (inode == (struct inode *)1))
+ {
+ from_kernel = 1;
+ line = (int)inode;
+ }
+ else
+ line = MINOR(filp->f_dentry->d_inode->i_rdev);
+
+ /* don't use more minor devices than we can support */
+ if (line < 0 || line >= PORT_CNT)
+ return -ENXIO;
+
+ info = &isp[line];
+
+ switch (cmd) {
+ case IFX_SSC_STATS_READ:
+ /* data must be a pointer to a struct ifx_ssc_statistics */
+ if (from_kernel)
+ memcpy((void *)data, (void *)&info->stats,
+ sizeof(struct ifx_ssc_statistics));
+ else
+ if (copy_to_user((void *)data,
+ (void *)&info->stats,
+ sizeof(struct ifx_ssc_statistics)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_STATS_RESET:
+ /* just resets the statistics counters */
+ memset((void *)&info->stats, 0, sizeof(struct ifx_ssc_statistics));
+ break;
+ case IFX_SSC_BAUD_SET:
+ /* if the buffers are not empty then the port is */
+ /* busy and we shouldn't change things on-the-fly! */
+ if (!info->txbuf || !info->rxbuf ||
+ (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
+ & IFX_SSC_STATE_BUSY)) {
+ ret_val = -EBUSY;
+ break;
+ }
+ /* misuse flags */
+ if (from_kernel)
+ flags = *((unsigned long *)data);
+ else
+ if (copy_from_user((void *)&flags,
+ (void *)data, sizeof(flags)))
+ {
+ ret_val = -EFAULT;
+ break;
+ }
+ if (flags == 0)
+ {
+ ret_val = -EINVAL;
+ break;
+ }
+ if (ifx_ssc_set_baud(info, flags) < 0)
+ {
+ ret_val = -EINVAL;
+ break;
+ }
+ info->baud = flags;
+ break;
+ case IFX_SSC_BAUD_GET:
+ if (from_kernel)
+ *((unsigned int *)data) = info->baud;
+ else
+ if (copy_to_user((void *)data,
+ (void *)&info->baud,
+ sizeof(unsigned long)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_RXTX_MODE_SET:
+ if (from_kernel)
+ tmp = *((unsigned long *)data);
+ else
+ if (copy_from_user((void *)&tmp,
+ (void *)data, sizeof(tmp))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ ret_val = ifx_ssc_rxtx_mode_set(info, tmp);
+ break;
+ case IFX_SSC_RXTX_MODE_GET:
+ tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) &
+ (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF));
+ if (from_kernel)
+ *((unsigned int *)data) = tmp;
+ else
+ if (copy_to_user((void *)data,
+ (void *)&tmp,
+ sizeof(tmp)))
+ ret_val = -EFAULT;
+ break;
+
+ case IFX_SSC_ABORT:
+ ifx_ssc_abort(info);
+ break;
+
+ case IFX_SSC_GPO_OUT_SET:
+ if (from_kernel)
+ tmp = *((unsigned long *)data);
+ else
+ if (copy_from_user((void *)&tmp,
+ (void *)data, sizeof(tmp))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ if (tmp > IFX_SSC_MAX_GPO_OUT)
+ ret_val = -EINVAL;
+ else
+ WRITE_PERIPHERAL_REGISTER
+ (1<<(tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS),
+ info->mapbase + IFX_SSC_WHBGPOSTAT);
+ break;
+ case IFX_SSC_GPO_OUT_CLR:
+ if (from_kernel)
+ tmp = *((unsigned long *)data);
+ else
+ if (copy_from_user((void *)&tmp,
+ (void *)data, sizeof(tmp))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ if (tmp > IFX_SSC_MAX_GPO_OUT)
+ ret_val = -EINVAL;
+ else {
+ WRITE_PERIPHERAL_REGISTER
+ (1<<(tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS),
+ info->mapbase + IFX_SSC_WHBGPOSTAT);
+ }
+ break;
+ case IFX_SSC_GPO_OUT_GET:
+ tmp = READ_PERIPHERAL_REGISTER
+ (info->mapbase + IFX_SSC_GPOSTAT);
+ if (from_kernel)
+ *((unsigned int *)data) = tmp;
+ else
+ if (copy_to_user((void *)data,
+ (void *)&tmp,
+ sizeof(tmp)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_FRM_STATUS_GET:
+ ifx_ssc_frm_status_get(info);
+ if (from_kernel)
+ memcpy((void *)data, (void *)&info->frm_status,
+ sizeof(struct ifx_ssc_frm_status));
+ else
+ if (copy_to_user((void *)data,
+ (void *)&info->frm_status,
+ sizeof(struct ifx_ssc_frm_status)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_FRM_CONTROL_GET:
+ ifx_ssc_frm_control_get(info);
+ if (from_kernel)
+ memcpy((void *)data, (void *)&info->frm_opts,
+ sizeof(struct ifx_ssc_frm_opts));
+ else
+ if (copy_to_user((void *)data,
+ (void *)&info->frm_opts,
+ sizeof(struct ifx_ssc_frm_opts)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_FRM_CONTROL_SET:
+ if (from_kernel)
+ memcpy((void *)&info->frm_opts, (void *)data,
+ sizeof(struct ifx_ssc_frm_opts));
+ else
+ if (copy_to_user((void *)&info->frm_opts,
+ (void *)data,
+ sizeof(struct ifx_ssc_frm_opts))){
+ ret_val = -EFAULT;
+ break;
+ }
+ ret_val = ifx_ssc_frm_control_set(info);
+ break;
+ case IFX_SSC_HWOPTS_SET:
+ /* data must be a pointer to a struct ifx_ssc_hwopts */
+ /* if the buffers are not empty then the port is */
+ /* busy and we shouldn't change things on-the-fly! */
+ if (!info->txbuf || !info->rxbuf ||
+ (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
+ & IFX_SSC_STATE_BUSY)) {
+ ret_val = -EBUSY;
+ break;
+ }
+ if (from_kernel)
+ memcpy((void *)&info->opts, (void *)data,
+ sizeof(struct ifx_ssc_hwopts));
+ else
+ if (copy_from_user((void *)&info->opts,
+ (void *)data,
+ sizeof(struct ifx_ssc_hwopts)))
+ {
+ ret_val = -EFAULT;
+ break;
+ }
+ if (ifx_ssc_hwinit(info) < 0)
+ {
+ ret_val = -EIO;
+ }
+ break;
+ case IFX_SSC_HWOPTS_GET:
+ /* data must be a pointer to a struct ifx_ssc_hwopts */
+ if (from_kernel)
+ memcpy((void *)data, (void *)&info->opts,
+ sizeof(struct ifx_ssc_hwopts));
+ else
+ if (copy_to_user((void *)data,
+ (void *)&info->opts,
+ sizeof(struct ifx_ssc_hwopts)))
+ ret_val = -EFAULT;
+ break;
+ default:
+ ret_val = -ENOIOCTLCMD;
+ }
+
+ return ret_val;
+} /* ifx_ssc_ioctl */
+EXPORT_SYMBOL(ifx_ssc_ioctl);
+
+///* the poll routine */
+//static unsigned int
+//ifx_ssc_poll(struct file *filp, struct poll_table_struct *pts)
+//{
+// int unit = MINOR(filp->f_dentry->d_inode->i_rdev);
+// struct ifx_ssc_port *info;
+// unsigned int mask = 0;
+// int spc;
+//
+// info = &isp[unit];
+//
+// /* add event to the wait queues */
+// /* DO NOT FORGET TO DO A WAKEUP ON THESE !!!! */
+// poll_wait(filp, &info->pwait, pts);
+//
+// /* are there bytes in the RX SW-FIFO? */
+// if (info->rxrp != info->rxwp)
+// mask |= POLLIN | POLLRDNORM;
+//
+// /* free space in the TX SW-FIFO */
+// spc = info->txrp - info->txwp - 1;
+// if (spc < 0)
+// spc += TX_BUFSIZE;
+//#ifdef IFX_SSC_USEDMA
+// /* writing always works, except in the DMA case when all descriptors */
+// /* are used up */
+// if (unit == 1 && info->dma_freecnt == 0)
+// spc = 0;
+//#endif
+// if (spc > 0)
+// mask |= POLLOUT | POLLWRNORM;
+//
+// return (mask);
+//}
+
+static int
+ifx_ssc1_read_proc(char *page, char **start, off_t offset, int count, int *eof, void *data)
+{
+ int off = 0;
+ unsigned long flags;
+
+ /* don't want any interrupts here */
+ save_flags(flags);
+ cli();
+
+
+ /* print statistics */
+ off += sprintf(page+off, "Statistics for Infineon Synchronous Serial Controller SSC1\n");
+ off += sprintf(page+off, "RX overflow errors %d\n", isp[0].stats.rxOvErr);
+ off += sprintf(page+off, "RX underflow errors %d\n", isp[0].stats.rxUnErr);
+ off += sprintf(page+off, "TX overflow errors %d\n", isp[0].stats.txOvErr);
+ off += sprintf(page+off, "TX underflow errors %d\n", isp[0].stats.txUnErr);
+ off += sprintf(page+off, "Abort errors %d\n", isp[0].stats.abortErr);
+ off += sprintf(page+off, "Mode errors %d\n", isp[0].stats.modeErr);
+ off += sprintf(page+off, "RX Bytes %d\n", isp[0].stats.rxBytes);
+ off += sprintf(page+off, "TX Bytes %d\n", isp[0].stats.txBytes);
+
+ restore_flags (flags); /* XXXXX */
+ *eof = 1;
+ return (off);
+}
+
+
+/*
+ * This routine prints out the appropriate serial driver version number
+ */
+static inline void
+show_version(void)
+{
+#if 0
+ printk("Infineon Technologies Synchronous Serial Controller (SSC) driver\n"
+ " version %s - built %s %s\n", IFX_SSC_DRV_VERSION, __DATE__, __TIME__);
+#endif
+} /* show_version */
+
+
+/*
+ * Due to the fact that a port can be dynamically switched between slave
+ * and master mode using an IOCTL the hardware is not initialized here,
+ * but in ifx_ssc_hwinit() as a result of an IOCTL.
+ */
+int __init
+ifx_ssc_init(void)
+{
+ struct ifx_ssc_port *info;
+ int i, nbytes;
+ unsigned long flags;
+ int ret_val;
+
+ // ### TO DO: dynamic port count evaluation due to pin multiplexing
+
+ ret_val = -ENOMEM;
+ nbytes = PORT_CNT * sizeof(struct ifx_ssc_port);
+ isp = (struct ifx_ssc_port *)kmalloc(nbytes, GFP_KERNEL);
+ if (isp == NULL)
+ {
+ printk("%s: no memory for isp\n", __FUNCTION__);
+ return (ret_val);
+ }
+ memset(isp, 0, nbytes);
+
+ show_version();
+
+ /* register the device */
+ ret_val = -ENXIO;
+/*
+ i = maj;
+*/
+ if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0)
+ {
+ printk("Unable to register major %d for the Infineon SSC\n", maj);
+ if (maj == 0){
+ goto errout;
+ }
+ else{
+ maj = 0;
+ if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0)
+ {
+ printk("Unable to register major %d for the Infineon SSC\n", maj);
+ goto errout;
+ }
+ }
+ }
+ if (maj == 0) maj = i;
+ //printk("registered major %d for Infineon SSC\n", maj);
+
+ /* set default values in ifx_ssc_port */
+ for (i = 0; i < PORT_CNT; i++) {
+ info = &isp[i];
+ info->port_nr = i;
+ /* default values for the HwOpts */
+ info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT;
+ info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT;
+ info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT;
+ info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT;
+ info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT;
+ info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK;
+ info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE;
+ info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA;
+ info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY;
+ info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE;
+ info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL;
+ info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH;
+ info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX;
+ info->opts.gpoCs = IFX_SSC_DEF_GPO_CS;
+ info->opts.gpoInv = IFX_SSC_DEF_GPO_INV;
+ info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE;
+ info->baud = IFX_SSC_DEF_BAUDRATE;
+ info->rxbuf = NULL;
+ info->txbuf = NULL;
+ /* values specific to SSC1 */
+ if (i == 0) {
+ info->mapbase = AMAZON_SSC_BASE_ADD_0;
+ // ### TO DO: power management
+
+ // setting interrupt vectors
+ info->txirq = IFX_SSC_TIR;
+ info->rxirq = IFX_SSC_RIR;
+ info->errirq = IFX_SSC_EIR;
+/*
+ info->frmirq = IFX_SSC_FIR;
+*/
+ }
+ /* activate SSC */
+ /* CLC.DISS = 0 */
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC);
+
+// ### TO DO: multiple instances
+
+ init_waitqueue_head(&info->rwait);
+ //init_waitqueue_head(&info->pwait);
+
+ local_irq_save(flags);
+
+ // init serial framing register
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON);
+
+ /* try to get the interrupts */
+ // ### TO DO: interrupt handling with multiple instances
+ ret_val = ifx_int_wrapper.request(info->txirq, ifx_ssc_tx_int,
+ 0, "ifx_ssc_tx", info);
+ if (ret_val){
+ printk("%s: unable to get irq %d\n", __FUNCTION__,
+ info->txirq);
+ local_irq_restore(flags);
+ goto errout;
+ }
+ ret_val = ifx_int_wrapper.request(info->rxirq, ifx_ssc_rx_int,
+ 0, "ifx_ssc_rx", info);
+ if (ret_val){
+ printk("%s: unable to get irq %d\n", __FUNCTION__,
+ info->rxirq);
+ local_irq_restore(flags);
+ goto irqerr;
+ }
+ ret_val = ifx_int_wrapper.request(info->errirq, ifx_ssc_err_int,
+ 0, "ifx_ssc_err", info);
+ if (ret_val){
+ printk("%s: unable to get irq %d\n", __FUNCTION__,
+ info->errirq);
+ local_irq_restore(flags);
+ goto irqerr;
+ }
+/*
+ ret_val = ifx_int_wrapper.request(info->frmirq, ifx_ssc_frm_int,
+ 0, "ifx_ssc_frm", info);
+ if (ret_val){
+ printk("%s: unable to get irq %d\n", __FUNCTION__,
+ info->frmirq);
+ local_irq_restore(flags);
+ goto irqerr;
+ }
+
+*/
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN);
+
+ local_irq_restore(flags);
+ } // for (i = 0; i < PORT_CNT; i++)
+
+ /* init the SSCs with default values */
+ for (i = 0; i < PORT_CNT; i++)
+ {
+ info = &isp[i];
+ if (ifx_ssc_hwinit(info) < 0)
+ {
+ printk("%s: hardware init failed for port %d\n",
+ __FUNCTION__, i);
+ goto irqerr;
+ }
+ }
+
+ /* register /proc read handler */
+ // ### TO DO: multiple instances
+ /* for SSC1, which is always present */
+ create_proc_read_entry("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL);
+ return 0;
+
+irqerr:
+ // ### TO DO: multiple instances
+ ifx_int_wrapper.free(isp[0].txirq,&isp[0]);
+ ifx_int_wrapper.free(isp[0].rxirq,&isp[0]);
+ ifx_int_wrapper.free(isp[0].errirq,&isp[0]);
+/*
+ ifx_int_wrapper.free(isp[0].frmirq, &isp[0]);
+*/
+errout:
+ /* free up any allocated memory in the error case */
+ kfree(isp);
+ return (ret_val);
+} /* ifx_ssc_init */
+
+
+void
+ifx_ssc_cleanup_module(void)
+{
+ int i;
+
+ /* free up any allocated memory */
+ for (i = 0; i < PORT_CNT; i++)
+ {
+ /* disable the SSC */
+ WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,isp[i].mapbase + IFX_SSC_WHBSTATE);
+ /* free the interrupts */
+ ifx_int_wrapper.free(isp[i].txirq, &isp[i]);
+ ifx_int_wrapper.free(isp[i].rxirq, &isp[i]);
+ ifx_int_wrapper.free(isp[i].errirq, &isp[i]);
+/*
+ ifx_int_wrapper.free(isp[i].frmirq, &isp[i]);
+
+ if (isp[i].rxbuf != NULL)
+ kfree(isp[i].rxbuf);
+ if (isp[i].txbuf != NULL)
+ kfree(isp[i].txbuf);
+*/
+ }
+ kfree(isp);
+ /* unregister the device */
+ if (unregister_chrdev(maj, "ssc"))
+ {
+ printk("Unable to unregister major %d for the SSC\n", maj);
+ }
+ /* delete /proc read handler */
+ remove_proc_entry("driver/ssc1", NULL);
+ remove_proc_entry("driver/ssc2", NULL);
+} /* ifx_ssc_cleanup_module */
+
+module_exit(ifx_ssc_cleanup_module);
+
+/* Module entry-points */
+module_init(ifx_ssc_init);
+
+#ifndef MODULE
+static int __init
+ifx_ssc_set_maj(char *str)
+{
+ maj = simple_strtol(str, NULL, 0);
+ return 1;
+}
+__setup("ssc_maj=", ifx_ssc_set_maj);
+#endif /* !MODULE */
+
+#define AMAZON_SSC_EMSG(fmt,arg...) printk("%s: "fmt,__FUNCTION__, ##arg)
+/* Brief: chip select enable
+ */
+inline int amazon_ssc_cs_low(u32 pin)
+{
+ int ret=0;
+ if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_CLR, (unsigned long)&pin))){
+ AMAZON_SSC_EMSG("clear CS %d fails\n",pin);
+ }
+ wmb();
+ return ret;
+}
+EXPORT_SYMBOL(amazon_ssc_cs_low);
+/* Brief: chip select disable
+ */
+inline int amazon_ssc_cs_high(u32 pin)
+{
+ int ret=0;
+ if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_SET, (unsigned long)&pin))){
+ AMAZON_SSC_EMSG("set CS %d fails\n", pin);
+ }
+ wmb();
+ return ret;
+}
+EXPORT_SYMBOL(amazon_ssc_cs_high);
+/* Brief: one SSC session
+ * Parameter:
+ * tx_buf
+ * tx_len
+ * rx_buf
+ * rx_len
+ * session_mode: IFX_SSC_MODE_RXTX or IFX_SSC_MODE_TX
+ * Return: >=0 number of bytes received (if rx_buf != 0) or transmitted
+ * <0 error code
+ * Description:
+ * 0. copy data to internal buffer
+ * 1. Write command
+ * 2a. If SSC_SESSION_MODE_TXONLY, read tx_len data
+ * 2b. If not Read back (tx_len + rx_len) data
+ * 3. copy internal buffer to rx buf if necessary
+ */
+static int ssc_session(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len)
+{
+ int ret=0;
+
+ char * ssc_tx_buf=NULL;
+ char * ssc_rx_buf=NULL;
+
+// volatile char ssc_tx_buf[128]={0};
+// volatile char ssc_rx_buf[128]={0};
+
+ int eff_size=0;
+ u8 mode=0;
+
+ if (tx_buf == NULL && tx_len ==0 && rx_buf == NULL && rx_len == 0){
+ AMAZON_SSC_EMSG("invalid parameters\n");
+ ret=-EINVAL;
+ goto ssc_session_exit;
+ }else if (tx_buf == NULL || tx_len == 0){
+ if (rx_buf != NULL && rx_len != 0){
+ mode = IFX_SSC_MODE_RX;
+ }else{
+ AMAZON_SSC_EMSG("invalid parameters\n");
+ ret=-EINVAL;
+ goto ssc_session_exit;
+ }
+ }else if (rx_buf == NULL || rx_len ==0){
+ if (tx_buf != NULL && tx_len != 0){
+ mode = IFX_SSC_MODE_TX;
+ }else{
+ AMAZON_SSC_EMSG("invalid parameters\n");
+ ret=-EINVAL;
+ goto ssc_session_exit;
+ }
+ }else{
+ mode = IFX_SSC_MODE_RXTX;
+ }
+
+ if (mode == IFX_SSC_MODE_RXTX){
+ eff_size = tx_len + rx_len;
+ }else if (mode == IFX_SSC_MODE_RX){
+ eff_size = rx_len;
+ }else{
+ eff_size = tx_len;
+ }
+
+ //4 bytes alignment, required by driver
+ /* change by TaiCheng */
+ //if (in_irq()){
+ if (1){
+ ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC);
+ ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC);
+ }else{
+ ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL);
+ ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL);
+ }
+ if (ssc_tx_buf == NULL || ssc_rx_buf == NULL){
+ AMAZON_SSC_EMSG("no memory for size of %d\n", eff_size);
+ ret = -ENOMEM;
+ goto ssc_session_exit;
+ }
+ memset((void*)ssc_tx_buf, 0, eff_size);
+ memset((void*)ssc_rx_buf, 0, eff_size);
+
+ if (tx_len>0){
+ memcpy(ssc_tx_buf, tx_buf, tx_len);
+ }
+
+ ret=ifx_ssc_kwrite(0, ssc_tx_buf, eff_size);
+
+ if (ret > 0) {
+ ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite
+ }
+
+ if ( ret != eff_size ){
+ AMAZON_SSC_EMSG("ifx_ssc_write return %d\n",ret);
+ goto ssc_session_exit;
+ }
+ ret=ifx_ssc_kread(0, ssc_rx_buf,eff_size);
+ if ( ret != eff_size ){
+ AMAZON_SSC_EMSG("ifx_ssc_read return %d\n",ret);
+ goto ssc_session_exit;
+ }
+
+ memcpy(rx_buf, ssc_rx_buf+tx_len, rx_len);
+
+ if (mode == IFX_SSC_MODE_TX) {
+ ret = tx_len;
+ }else{
+ ret = rx_len;
+ }
+ssc_session_exit:
+
+ if (ssc_tx_buf != NULL) kfree(ssc_tx_buf);
+ if (ssc_rx_buf != NULL) kfree(ssc_rx_buf);
+
+ if (ret<0) {
+ printk("ssc session fails\n");
+ }
+ return ret;
+}
+/* Brief: TX-RX session
+ * Parameter:
+ * tx_buf
+ * tx_len
+ * rx_buf
+ * rx_len
+ * Return: >=0 number of bytes received
+ * <0 error code
+ * Description:
+ * 1. TX session
+ * 2. RX session
+ */
+int amazon_ssc_txrx(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len)
+{
+ return ssc_session(tx_buf,tx_len,rx_buf,rx_len);
+}
+EXPORT_SYMBOL(amazon_ssc_txrx);
+/* Brief: TX only session
+ * Parameter:
+ * tx_buf
+ * tx_len
+ * Return: >=0 number of bytes transmitted
+ * <0 error code
+ */
+int amazon_ssc_tx(char * tx_buf, u32 tx_len)
+{
+ return ssc_session(tx_buf,tx_len,NULL,0);
+}
+EXPORT_SYMBOL(amazon_ssc_tx);
+/* Brief: RX only session
+ * Parameter:
+ * rx_buf
+ * rx_len
+ * Return: >=0 number of bytes received
+ * <0 error code
+ */
+int amazon_ssc_rx(char * rx_buf, u32 rx_len)
+{
+ return ssc_session(NULL,0,rx_buf,rx_len);
+}
+EXPORT_SYMBOL(amazon_ssc_rx);
+
diff --git a/target/linux/amazon/files/drivers/char/watchdog/amazon_wdt.c b/target/linux/amazon/files/drivers/char/watchdog/amazon_wdt.c
new file mode 100644
index 0000000..3c58d2f
--- /dev/null
+++ b/target/linux/amazon/files/drivers/char/watchdog/amazon_wdt.c
@@ -0,0 +1,246 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright 2004 Wu Qi Ming <gokimi@msn.com>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/tty.h>
+#include <linux/selection.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/kdev_t.h>
+#include <linux/ioctl.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/amazon_wdt.h>
+
+#define DRV_NAME "AMAZON WDT:"
+
+#undef AMAZON_WDT_DEBUG
+
+extern unsigned int amazon_get_fpi_hz(void);
+static int amazon_wdt_isopen = 0;
+
+#ifdef AMAZON_WDT_DEBUG
+static struct proc_dir_entry* amazon_wdt_dir;
+#endif
+
+int wdt_enable(int timeout)
+{
+ u32 hard_psw, ffpi;
+ int reload_value, divider = 1;
+
+ ffpi = amazon_get_fpi_hz();
+
+ reload_value = 65536 - timeout * ffpi / 256;
+
+ if (reload_value < 0) {
+ divider = 0;
+ reload_value = 65536 - timeout * ffpi / 16384;
+ }
+
+ if (reload_value < 0){
+ printk(KERN_INFO DRV_NAME "timeout too large %d\n", timeout);
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO DRV_NAME "timeout:%d reload_value: %8x\n", timeout, reload_value);
+
+ hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
+ (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
+ amazon_writel(hard_psw, AMAZON_WDT_CON0);
+ wmb();
+
+ amazon_writel((hard_psw & 0xff00) + (reload_value << 16) + 0xf2, AMAZON_WDT_CON0);
+ wmb();
+
+ amazon_writel(divider << 2, AMAZON_WDT_CON1);
+ wmb();
+
+ hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
+ (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
+ amazon_writel(hard_psw, AMAZON_WDT_CON0);
+ wmb();
+
+ amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3);
+ wmb();
+ return 0;
+}
+
+void wdt_disable(void)
+{
+ u32 hard_psw = 0;
+
+ hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
+ (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
+ amazon_writel(hard_psw, AMAZON_WDT_CON0);
+ wmb();
+
+ amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf2);
+ wmb();
+
+ amazon_writel_masked(AMAZON_WDT_CON1, 0x8, 0x8);
+ wmb();
+
+ hard_psw=(amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
+ (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
+ amazon_writel(hard_psw, AMAZON_WDT_CON0);
+ wmb();
+
+ amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3);
+ wmb();
+
+ return;
+}
+
+static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ int result=0;
+ static int timeout=-1;
+
+ switch(cmd){
+ case AMAZON_WDT_IOC_START:
+ printk(KERN_INFO DRV_NAME "enable watch dog timer!\n");
+ if (copy_from_user((void*)&timeout, (void*)arg, sizeof (int))) {
+ printk(KERN_INFO DRV_NAME "invalid argument\n");
+ result=-EINVAL;
+ } else if ((result = wdt_enable(timeout)) < 0) {
+ timeout = -1;
+ }
+ break;
+
+ case AMAZON_WDT_IOC_STOP:
+ printk(KERN_INFO DRV_NAME "disable watch dog timer\n");
+ timeout = -1;
+ wdt_disable();
+ break;
+
+ case AMAZON_WDT_IOC_PING:
+ if (timeout < 0) {
+ result = -EIO;
+ } else {
+ result = wdt_enable(timeout);
+ }
+ break;
+
+ default:
+ result=-EINVAL;
+ break;
+ }
+ return result;
+}
+
+static ssize_t wdt_read(struct file *file, char *buf, size_t count, loff_t *offset)
+{
+ return 0;
+}
+
+static ssize_t wdt_write(struct file *file, const char *buf, size_t count, loff_t *offset)
+{
+ return count;
+}
+
+static int wdt_open(struct inode *inode, struct file *file)
+{
+ if (amazon_wdt_isopen == 1)
+ return -EBUSY;
+
+ amazon_wdt_isopen = 1;
+ printk(KERN_INFO DRV_NAME "opened\n");
+ return 0;
+}
+
+static int wdt_release(struct inode *inode, struct file *file)
+{
+ amazon_wdt_isopen = 0;
+ printk(KERN_INFO DRV_NAME "closed\n");
+ return 0;
+}
+
+#ifdef AMAZON_WDT_DEBUG
+int wdt_register_proc_read(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int len=0;
+ len+=sprintf(buf+len,"NMISR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_NMISR));
+ len+=sprintf(buf+len,"RST_REQ: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_REQ));
+ len+=sprintf(buf+len,"RST_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_SR));
+ len+=sprintf(buf+len,"WDT_CON0: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON0));
+ len+=sprintf(buf+len,"WDT_CON1: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON1));
+ len+=sprintf(buf+len,"WDT_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_SR));
+ *eof = 1;
+ return len;
+}
+#endif
+
+static struct file_operations wdt_fops = {
+ read: wdt_read,
+ write: wdt_write,
+ ioctl: wdt_ioctl,
+ open: wdt_open,
+ release: wdt_release,
+};
+
+int __init amazon_wdt_init_module(void)
+{
+ int result = result = register_chrdev(0, "watchdog", &wdt_fops);
+
+ if (result < 0) {
+ printk(KERN_INFO DRV_NAME "cannot register device\n");
+ return result;
+ }
+
+#ifdef AMAZON_WDT_DEBUG
+ amazon_wdt_dir=proc_mkdir("amazon_wdt",NULL);
+ create_proc_read_entry("wdt_register", 0, amazon_wdt_dir,
+ wdt_register_proc_read, NULL);
+#endif
+
+ amazon_wdt_isopen=0;
+ printk(KERN_INFO DRV_NAME "driver loaded but inactive");
+ return 0;
+}
+
+void amazon_wdt_cleanup_module(void)
+{
+ unregister_chrdev(0, "watchdog");
+#ifdef AMAZON_WDT_DEBUG
+ remove_proc_entry("wdt_register", amazon_wdt_dir);
+ remove_proc_entry("amazon_wdt", NULL);
+#endif
+ printk(KERN_INFO DRV_NAME "unregistered");
+ return;
+}
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Infineon / John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("AMAZON WDT driver");
+
+module_init(amazon_wdt_init_module);
+module_exit(amazon_wdt_cleanup_module);
+
diff --git a/target/linux/amazon/files/drivers/mtd/maps/amazon.c b/target/linux/amazon/files/drivers/mtd/maps/amazon.c
new file mode 100644
index 0000000..3e7dc4f
--- /dev/null
+++ b/target/linux/amazon/files/drivers/mtd/maps/amazon.c
@@ -0,0 +1,166 @@
+/*
+ * Handle mapping of the flash memory access routines
+ * on Amazon based devices.
+ *
+ * Copyright(C) 2004 peng.liu@infineon.com
+ *
+ * This code is GPLed
+ *
+ */
+// 000005:fchang 2005/6/2 Modified by Bingtao to double check if the EBU is enabled/disabled
+// 506231:tc.chen 2005/06/23 increase firmware partition size form 192KB to 256KB
+// 050701:linmars 2005/07/01 fix flash size wrong alignment after increase firmware partition
+// 165001:henryhsu 2005/8/18 Remove the support for Intel flash because of 2.1 not enough rootfs partition size
+// 165001:henryhsu 2005/9/7 Rolback to support INtel flash
+// 509071:tc.chen 2005/09/07 Reduced flash writing time
+// 511046:linmars 2005/11/04 change bootloader size from 128 into 64
+// 511241:linmars 2005/11/24 merge TaiChen's IRM patch
+
+// copyright 2005 infineon
+
+// copyright 2007 john crispin <blogic@openwrt.org>
+// copyright 2007 felix fietkau <nbd@openwrt.org>
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mutex.h>
+#include <asm/amazon/amazon.h>
+
+#define AMAZON_PCI_ARB_CTL_ALT 0xb100205c
+#define AMAZON_MTD_REG32( addr ) (*(volatile u32 *)(addr))
+
+
+static struct map_info amazon_map = {
+ .name = "AMAZON_FLASH",
+ .bankwidth = 2,
+ .size = 0x400000,
+};
+
+static map_word amazon_read16(struct map_info * map, unsigned long ofs)
+{
+ map_word temp;
+ ofs ^= 2;
+ temp.x[0] = *((__u16 *) (map->virt + ofs));
+ return temp;
+}
+
+static void amazon_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+ adr ^= 2;
+ *((__u16 *) (map->virt + adr)) = d.x[0];
+}
+
+void amazon_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ u8 *p;
+ u8 *to_8;
+ ssize_t l = len;
+ from = (unsigned long) (from + map->virt);
+ p = (u8 *) from;
+ to_8 = (u8 *) to;
+ while(len--){
+ *to_8++ = *p++;
+ }
+}
+
+void amazon_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ u8 *p = (u8*) from;
+ u8 *to_8;
+ to += (unsigned long) map->virt;
+ to_8 = (u8*)to;
+ while(len--){
+ *p++ = *to_8++;
+ }
+}
+
+#define UBOOT_SIZE 0x40000
+
+static struct mtd_partition amazon_partitions[3] = {
+ {
+ name:"U-Boot", /* U-Boot firmware */
+ offset:0x00000000,
+ size:UBOOT_SIZE , /* 128k */
+ },
+ {
+ name:"kernel", /* firmware */
+ offset:UBOOT_SIZE,
+ size:0x00100000, /* 192K */
+ },
+ {
+ name:"rootfs", /* default partition */
+ offset:0x00200000,
+ size:0x00200000,
+ },
+};
+
+
+unsigned long flash_start = 0x13000000;
+unsigned long flash_size = 0x800000;
+unsigned long uImage_size = 0x10000d;
+
+int find_uImage_size(unsigned long start_offset){
+ unsigned long temp;
+
+ printk("trying to find uImage and its size\n");
+ amazon_copy_from(&amazon_map, &temp, start_offset + 12, 4);
+ printk("kernel size is %d \n", temp + 0x40);
+ return temp + 0x40;
+}
+
+int __init init_amazon_mtd(void)
+{
+ int ret = 0;
+ struct mtd_info *mymtd = NULL;
+ struct mtd_partition *parts = NULL;
+
+ *AMAZON_EBU_BUSCON0 = 0x1d7ff;
+
+ amazon_map.read = amazon_read16;
+ amazon_map.write = amazon_write16;
+ amazon_map.copy_from = amazon_copy_from;
+ amazon_map.copy_to = amazon_copy_to;
+
+ amazon_map.phys = flash_start;
+ amazon_map.virt = ioremap_nocache(flash_start, flash_size);
+
+ if (!amazon_map.virt) {
+ printk(KERN_WARNING "Failed to ioremap!\n");
+ return -EIO;
+ }
+
+ mymtd = (struct mtd_info *) do_map_probe("cfi_probe", &amazon_map);
+ if (!mymtd) {
+ iounmap(amazon_map.virt);
+ printk("probing failed\n");
+ return -ENXIO;
+ }
+
+ mymtd->owner = THIS_MODULE;
+ parts = &amazon_partitions[0];
+ amazon_partitions[2].offset = UBOOT_SIZE + find_uImage_size(amazon_partitions[1].offset);
+ amazon_partitions[1].size = mymtd->size - amazon_partitions[1].offset - (2 * mymtd->erasesize);
+ amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - (2 * mymtd->erasesize);
+ add_mtd_partitions(mymtd, parts, 3);
+ return 0;
+}
+
+static void __exit cleanup_amazon_mtd(void)
+{
+ /* FIXME! */
+}
+
+module_init(init_amazon_mtd);
+module_exit(cleanup_amazon_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("john crispin blogic@openwrt.org");
+MODULE_DESCRIPTION("MTD map driver for AMAZON boards");
diff --git a/target/linux/amazon/files/drivers/net/amazon_sw.c b/target/linux/amazon/files/drivers/net/amazon_sw.c
new file mode 100644
index 0000000..d19db6e
--- /dev/null
+++ b/target/linux/amazon/files/drivers/net/amazon_sw.c
@@ -0,0 +1,876 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+//-----------------------------------------------------------------------
+/*
+ * Description:
+ * Driver for Infineon Amazon 3 port switch
+ */
+//-----------------------------------------------------------------------
+/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com]
+ * Created: 7-April-2004
+ */
+//-----------------------------------------------------------------------
+/* History
+ * Changed on: Jun 28, 2004
+ * Changed by: peng.liu@infineon.com
+ * Reason: add hardware flow control (HFC) (CONFIG_NET_HW_FLOWCONTROL)
+ *
+ * Changed on: Apr 6, 2005
+ * Changed by: mars.lin@infineon.com
+ * Reason : supoort port identification
+ */
+
+
+// copyright 2004-2005 infineon.com
+
+// copyright 2007 john crispin <blogic@openwrt.org>
+// copyright 2007 felix fietkau <nbd@openwrt.org>
+
+
+// TODO
+// port vlan code from bcrm target... the tawainese code was scrapped due to crappyness
+// check all the mmi reg settings and possibly document them better
+// verify the ethtool code
+// remove the while(1) stuff
+// further clean up and rework ... but it works for now
+// check the mode[]=bridge stuff
+// verify that the ethaddr can be set from u-boot
+
+
+#ifndef __KERNEL__
+#define __KERNEL__
+#endif
+
+
+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
+#define MODVERSIONS
+#endif
+
+#if defined(MODVERSIONS) && !defined(__GENKSYMS__)
+#include <linux/modversions.h>
+#endif
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/mii.h>
+#include <asm/uaccess.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/in6.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/ethtool.h>
+#include <asm/checksum.h>
+#include <linux/init.h>
+
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/amazon_dma.h>
+#include <asm/amazon/amazon_sw.h>
+
+// how many mii ports are there ?
+#define AMAZON_SW_INT_NO 2
+
+#define ETHERNET_PACKET_DMA_BUFFER_SIZE 1536
+
+/***************************************** Module Parameters *************************************/
+char mode[] = "bridge";
+module_param_array(mode, charp, NULL, 0);
+
+static int timeout = 1 * HZ;
+module_param(timeout, int, 0);
+
+int switch_init(struct net_device *dev);
+void switch_tx_timeout(struct net_device *dev);
+
+struct net_device switch_devs[2] = {
+ {init:switch_init,},
+ {init:switch_init,}
+};
+
+int add_mac_table_entry(u64 entry_value)
+{
+ int i;
+ u32 data1, data2;
+
+ AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = ~7;
+
+ for (i = 0; i < 32; i++) {
+ AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | i;
+ while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
+ data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1);
+ data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
+ if ((data1 & (0x00700000)) != 0x00700000)
+ continue;
+ AMAZON_SW_REG32(AMAZON_SW_DATA1) = (u32) (entry_value >> 32);
+ AMAZON_SW_REG32(AMAZON_SW_DATA2) = (u32) entry_value & 0xffffffff;
+ AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | i;
+ while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
+ break;
+ }
+ AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) |= 7;
+ if (i >= 32)
+ return -1;
+ return OK;
+}
+
+u64 read_mac_table_entry(int index)
+{
+ u32 data1, data2;
+ u64 value;
+ AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | index;
+ while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
+ data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1) & 0xffffff;
+ data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
+ value = (u64) data1 << 32 | (u64) data2;
+ return value;
+}
+
+int write_mac_table_entry(int index, u64 value)
+{
+ u32 data1, data2;
+ data1 = (u32) (value >> 32);
+ data2 = (u32) value & 0xffffffff;
+ AMAZON_SW_REG32(AMAZON_SW_DATA1) = data1;
+ AMAZON_SW_REG32(AMAZON_SW_DATA2) = data2;
+ AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | index;
+ while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
+ return OK;
+}
+
+u32 get_mdio_reg(int phy_addr, int reg_num)
+{
+ u32 value;
+ AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (3 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16);
+ while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
+ value = AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & 0xffff;
+ return value;
+}
+
+int set_mdio_reg(int phy_addr, int reg_num, u32 value)
+{
+ AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (2 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16) | (value & 0xffff);
+ while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
+ return OK;
+}
+
+int auto_negotiate(int phy_addr)
+{
+ u32 value = 0;
+ value = get_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG);
+ set_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG, (value | RESTART_AUTO_NEGOTIATION | AUTO_NEGOTIATION_ENABLE | PHY_RESET));
+ return OK;
+}
+
+/*
+ In this version of switch driver, we split the dma channels for the switch.
+ 2 for port0 and 2 for port1. So that we can do internal bridging if necessary.
+ In switch mode, packets coming in from port0 or port1 is able to do Destination
+ address lookup. Packets coming from port0 with destination address of port1 should
+ not go to pmac again. The switch hardware should be able to do the switch in the hard
+ ware level. Packets coming from the pmac should not do the DA look up in that the
+ desination is already known for the kernel. It only needs to go to the correct NIC to
+ find its way out.
+ */
+int amazon_sw_chip_init(void)
+{
+ u32 tmp1;
+ int i = 0;
+
+ /* Aging tick select: 5mins */
+ tmp1 = 0xa0;
+ if (strcmp(mode, "bridge") == 0) {
+ // bridge mode, set militarised mode to 1, no learning!
+ tmp1 |= 0xC00;
+ } else {
+ // enable learning for P0 and P1,
+ tmp1 |= 3;
+ }
+
+ /* unknown broadcast/multicast/unicast to all ports */
+ AMAZON_SW_REG32(AMAZON_SW_UN_DEST) = 0x1ff;
+
+ AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = tmp1;
+
+ /* OCS:1 set OCS bit, split the two NIC in rx direction EDL:1 (enable DA lookup) */
+#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
+ AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x700;
+#else
+ AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x401;
+#endif
+
+ /* EPC: 1 split the two NIC in tx direction CRC is generated */
+ AMAZON_SW_REG32(AMAZON_SW_P2_CTL) = 0x6;
+
+ // for bi-directional
+ AMAZON_SW_REG32(AMAZON_SW_P0_WM) = 0x14141412;
+ AMAZON_SW_REG32(AMAZON_SW_P1_WM) = 0x14141412;
+ AMAZON_SW_REG32(AMAZON_SW_P2_WM) = 0x28282826;
+ AMAZON_SW_REG32(AMAZON_SW_GBL_WM) = 0x0;
+
+ AMAZON_SW_REG32(AMAZON_CGU_PLL0SR) = (AMAZON_SW_REG32(AMAZON_CGU_PLL0SR)) | 0x58000000;
+ // clock for PHY
+ AMAZON_SW_REG32(AMAZON_CGU_IFCCR) = (AMAZON_SW_REG32(AMAZON_CGU_IFCCR)) | 0x80000004;
+ // enable power for PHY
+ AMAZON_SW_REG32(AMAZON_PMU_PWDCR) = (AMAZON_SW_REG32(AMAZON_PMU_PWDCR)) | AMAZON_PMU_PWDCR_EPHY;
+ // set reverse MII, enable MDIO statemachine
+ AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG) = 0x800027bf;
+ while (1)
+ if (((AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG)) & 0x80000000) == 0)
+ break;
+ AMAZON_SW_REG32(AMAZON_SW_EPHY) = 0xff;
+
+ // auto negotiation
+ AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = 0x83e08000;
+ auto_negotiate(0x1f);
+
+ /* enable all ports */
+ AMAZON_SW_REG32(AMAZON_SW_PS_CTL) = 0x7;
+ for (i = 0; i < 32; i++)
+ write_mac_table_entry(i, 1 << 50);
+ return 0;
+}
+
+static unsigned char my_ethaddr[MAX_ADDR_LEN];
+/* need to get the ether addr from u-boot */
+static int __init ethaddr_setup(char *line)
+{
+ char *ep;
+ int i;
+
+ memset(my_ethaddr, 0, MAX_ADDR_LEN);
+ for (i = 0; i < 6; i++) {
+ my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0;
+ if (line)
+ line = (*ep) ? ep + 1 : ep;
+ }
+ printk("mac address %2x-%2x-%2x-%2x-%2x-%2x \n", my_ethaddr[0], my_ethaddr[1], my_ethaddr[2], my_ethaddr[3], my_ethaddr[4], my_ethaddr[5]);
+ return 0;
+}
+
+__setup("ethaddr=", ethaddr_setup);
+
+static void open_rx_dma(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ struct dma_device_info *dma_dev = priv->dma_device;
+ int i;
+
+ for (i = 0; i < dma_dev->num_rx_chan; i++)
+ dma_dev->rx_chan[i].control = 1;
+ dma_device_update_rx(dma_dev);
+}
+
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+static void close_rx_dma(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ struct dma_device_info *dma_dev = priv->dma_device;
+ int i;
+
+ for (i = 0; i < dma_dev->num_rx_chan; i++)
+ dma_dev->rx_chan[i].control = 0;
+ dma_device_update_rx(dma_dev);
+}
+
+void amazon_xon(struct net_device *dev)
+{
+ unsigned long flag;
+ local_irq_save(flag);
+ open_rx_dma(dev);
+ local_irq_restore(flag);
+}
+#endif
+
+int switch_open(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ if (!strcmp(dev->name, "eth1")) {
+ priv->mdio_phy_addr = PHY0_ADDR;
+ }
+ open_rx_dma(dev);
+
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ if ((priv->fc_bit = netdev_register_fc(dev, amazon_xon)) == 0) {
+ printk("Hardware Flow Control register fails\n");
+ }
+#endif
+
+ netif_start_queue(dev);
+ return OK;
+}
+
+int switch_release(struct net_device *dev)
+{
+ int i;
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ struct dma_device_info *dma_dev = priv->dma_device;
+
+ for (i = 0; i < dma_dev->num_tx_chan; i++)
+ dma_dev->tx_chan[i].control = 0;
+ for (i = 0; i < dma_dev->num_rx_chan; i++)
+ dma_dev->rx_chan[i].control = 0;
+
+ dma_device_update(dma_dev);
+
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ if (priv->fc_bit) {
+ netdev_unregister_fc(priv->fc_bit);
+ }
+#endif
+ netif_stop_queue(dev);
+
+ return OK;
+}
+
+
+void switch_rx(struct net_device *dev, int len, struct sk_buff *skb)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ int mit_sel = 0;
+#endif
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ mit_sel = netif_rx(skb);
+ switch (mit_sel) {
+ case NET_RX_SUCCESS:
+ case NET_RX_CN_LOW:
+ case NET_RX_CN_MOD:
+ break;
+ case NET_RX_CN_HIGH:
+ break;
+ case NET_RX_DROP:
+ if ((priv->fc_bit)
+ && (!test_and_set_bit(priv->fc_bit, &netdev_fc_xoff))) {
+ close_rx_dma(dev);
+ }
+ break;
+ }
+#else
+ netif_rx(skb);
+#endif
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes += len;
+ return;
+}
+
+int asmlinkage switch_hw_tx(char *buf, int len, struct net_device *dev)
+{
+ struct switch_priv *priv = dev->priv;
+ struct dma_device_info *dma_dev = priv->dma_device;
+
+ dma_dev->current_tx_chan = 0;
+ return dma_device_write(dma_dev, buf, len, priv->skb);
+}
+
+int asmlinkage switch_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ int len;
+ char *data;
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ data = skb->data;
+ priv->skb = skb;
+ dev->trans_start = jiffies;
+
+ if (switch_hw_tx(data, len, dev) != len) {
+ dev_kfree_skb_any(skb);
+ return OK;
+ }
+
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += len;
+ return OK;
+}
+
+void switch_tx_timeout(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ priv->stats.tx_errors++;
+ netif_wake_queue(dev);
+ return;
+}
+
+void negotiate(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ unsigned short data = get_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG);
+
+ data &= ~(MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD);
+
+ switch (priv->current_speed_selection) {
+ case 10:
+ if (priv->current_duplex == full)
+ data |= MDIO_ADVERT_10_FD;
+ else if (priv->current_duplex == half)
+ data |= MDIO_ADVERT_10_HD;
+ else
+ data |= MDIO_ADVERT_10_HD | MDIO_ADVERT_10_FD;
+ break;
+
+ case 100:
+ if (priv->current_duplex == full)
+ data |= MDIO_ADVERT_100_FD;
+ else if (priv->current_duplex == half)
+ data |= MDIO_ADVERT_100_HD;
+ else
+ data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD;
+ break;
+
+ case 0: /* Auto */
+ if (priv->current_duplex == full)
+ data |= MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD;
+ else if (priv->current_duplex == half)
+ data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_10_HD;
+ else
+ data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
+ break;
+
+ default: /* assume autoneg speed and duplex */
+ data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
+ }
+
+ set_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG, data);
+
+ /* Renegotiate with link partner */
+
+ data = get_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG);
+ data |= MDIO_BC_NEGOTIATE;
+
+ set_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG, data);
+
+}
+
+
+void set_duplex(struct net_device *dev, enum duplex new_duplex)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ if (new_duplex != priv->current_duplex) {
+ priv->current_duplex = new_duplex;
+ negotiate(dev);
+ }
+}
+
+void set_speed(struct net_device *dev, unsigned long speed)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ priv->current_speed_selection = speed;
+ negotiate(dev);
+}
+
+static int switch_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ struct ethtool_cmd ecmd;
+
+ if (copy_from_user(&ecmd, ifr->ifr_data, sizeof(ecmd)))
+ return -EFAULT;
+
+ switch (ecmd.cmd) {
+ case ETHTOOL_GSET:
+ memset((void *) &ecmd, 0, sizeof(ecmd));
+ ecmd.supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
+ ecmd.port = PORT_TP;
+ ecmd.transceiver = XCVR_EXTERNAL;
+ ecmd.phy_address = priv->mdio_phy_addr;
+
+ ecmd.speed = priv->current_speed;
+
+ ecmd.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+
+ ecmd.advertising = ADVERTISED_TP;
+ if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
+ ecmd.advertising |= ADVERTISED_Autoneg;
+ else {
+ ecmd.advertising |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
+ if (priv->current_speed_selection == 10)
+ ecmd.advertising &= ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full);
+ else if (priv->current_speed_selection == 100)
+ ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full);
+ if (priv->current_duplex == half)
+ ecmd.advertising &= ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full);
+ else if (priv->current_duplex == full)
+ ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half);
+ }
+ ecmd.autoneg = AUTONEG_ENABLE;
+ if (copy_to_user(ifr->ifr_data, &ecmd, sizeof(ecmd)))
+ return -EFAULT;
+ break;
+
+ case ETHTOOL_SSET:
+ if (!capable(CAP_NET_ADMIN)) {
+ return -EPERM;
+ }
+ if (ecmd.autoneg == AUTONEG_ENABLE) {
+ set_duplex(dev, autoneg);
+ set_speed(dev, 0);
+ } else {
+ set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full);
+ set_speed(dev, ecmd.speed == SPEED_10 ? 10 : 100);
+ }
+ break;
+
+ case ETHTOOL_GDRVINFO:
+ {
+ struct ethtool_drvinfo info;
+ memset((void *) &info, 0, sizeof(info));
+ strncpy(info.driver, "AMAZONE", sizeof(info.driver) - 1);
+ strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1);
+ strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1);
+ info.regdump_len = 0;
+ info.eedump_len = 0;
+ info.testinfo_len = 0;
+ if (copy_to_user(ifr->ifr_data, &info, sizeof(info)))
+ return -EFAULT;
+ }
+ break;
+ case ETHTOOL_NWAY_RST:
+ if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
+ negotiate(dev);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ break;
+ }
+ return 0;
+}
+
+
+
+int mac_table_tools_ioctl(struct net_device *dev, struct mac_table_req *req)
+{
+ int cmd;
+ int i;
+ cmd = req->cmd;
+ switch (cmd) {
+ case RESET_MAC_TABLE:
+ for (i = 0; i < 32; i++) {
+ write_mac_table_entry(i, 0);
+ }
+ break;
+ case READ_MAC_ENTRY:
+ req->entry_value = read_mac_table_entry(req->index);
+ break;
+ case WRITE_MAC_ENTRY:
+ write_mac_table_entry(req->index, req->entry_value);
+ break;
+ case ADD_MAC_ENTRY:
+ add_mac_table_entry(req->entry_value);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+/*
+ the ioctl for the switch driver is developed in the conventional way
+ the control type falls into some basic categories, among them, the
+ SIOCETHTOOL is the traditional eth interface. VLAN_TOOLS and
+ MAC_TABLE_TOOLS are designed specifically for amazon chip. User
+ should be aware of the data structures used in these interfaces.
+*/
+int switch_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct data_req *switch_data_req = (struct data_req *) ifr->ifr_data;
+ struct mac_table_req *switch_mac_table_req;
+ switch (cmd) {
+ case SIOCETHTOOL:
+ switch_ethtool_ioctl(dev, ifr);
+ break;
+ case SIOCGMIIPHY: /* Get PHY address */
+ break;
+ case SIOCGMIIREG: /* Read MII register */
+ break;
+ case SIOCSMIIREG: /* Write MII register */
+ break;
+ case SET_ETH_SPEED_10: /* 10 Mbps */
+ break;
+ case SET_ETH_SPEED_100: /* 100 Mbps */
+ break;
+ case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */
+ break;
+ case SET_ETH_DUPLEX_HALF: /* Half duplex. */
+ break;
+ case SET_ETH_DUPLEX_FULL: /* Full duplex. */
+ break;
+ case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex */
+ break;
+ case SET_ETH_REG:
+ AMAZON_SW_REG32(switch_data_req->index) = switch_data_req->value;
+ break;
+ case MAC_TABLE_TOOLS:
+ switch_mac_table_req = (struct mac_table_req *) ifr->ifr_data;
+ mac_table_tools_ioctl(dev, switch_mac_table_req);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+struct net_device_stats *switch_stats(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) dev->priv;
+ return &priv->stats;
+}
+
+int switch_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if (new_mtu >= 1516)
+ new_mtu = 1516;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+int switch_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
+{
+ u8 *buf = NULL;
+ int len = 0;
+ struct sk_buff *skb = NULL;
+
+ len = dma_device_read(dma_dev, &buf, (void **) &skb);
+
+ if (len >= 0x600) {
+ printk("packet too large %d\n", len);
+ goto switch_hw_receive_err_exit;
+ }
+
+ /* remove CRC */
+ len -= 4;
+ if (skb == NULL) {
+ printk("cannot restore pointer\n");
+ goto switch_hw_receive_err_exit;
+ }
+ if (len > (skb->end - skb->tail)) {
+ printk("BUG, len:%d end:%p tail:%p\n", (len + 4), skb->end, skb->tail);
+ goto switch_hw_receive_err_exit;
+ }
+ skb_put(skb, len);
+ skb->dev = dev;
+ switch_rx(dev, len, skb);
+ return OK;
+
+ switch_hw_receive_err_exit:
+ if (skb)
+ dev_kfree_skb_any(skb);
+ return -EIO;
+}
+
+int dma_intr_handler(struct dma_device_info *dma_dev, int status)
+{
+ struct net_device *dev;
+
+ dev = switch_devs + (u32) dma_dev->priv;
+ switch (status) {
+ case RCV_INT:
+ switch_hw_receive(dev, dma_dev);
+ break;
+ case TX_BUF_FULL_INT:
+ netif_stop_queue(dev);
+ break;
+ case TRANSMIT_CPT_INT:
+ netif_wake_queue(dev);
+ break;
+ }
+ return OK;
+}
+
+/* reserve 2 bytes in front of data pointer*/
+u8 *dma_buffer_alloc(int len, int *byte_offset, void **opt)
+{
+ u8 *buffer = NULL;
+ struct sk_buff *skb = NULL;
+ skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
+ if (skb == NULL) {
+ return NULL;
+ }
+ buffer = (u8 *) (skb->data);
+ skb_reserve(skb, 2);
+ *(int *) opt = (int) skb;
+ *byte_offset = 2;
+ return buffer;
+}
+
+int dma_buffer_free(u8 * dataptr, void *opt)
+{
+ struct sk_buff *skb = NULL;
+ if (opt == NULL) {
+ kfree(dataptr);
+ } else {
+ skb = (struct sk_buff *) opt;
+ dev_kfree_skb_any(skb);
+ }
+ return OK;
+}
+
+int init_dma_device(_dma_device_info * dma_dev)
+{
+ int i;
+ int num_tx_chan, num_rx_chan;
+ if (strcmp(dma_dev->device_name, "switch1") == 0) {
+ num_tx_chan = 1;
+ num_rx_chan = 2;
+ dma_dev->priv = (void *) 0;
+ } else {
+ num_tx_chan = 1;
+ num_rx_chan = 2;
+ dma_dev->priv = (void *) 1;
+ }
+
+ dma_dev->weight = 1;
+ dma_dev->num_tx_chan = num_tx_chan;
+ dma_dev->num_rx_chan = num_rx_chan;
+ dma_dev->ack = 1;
+ dma_dev->tx_burst_len = 4;
+ dma_dev->rx_burst_len = 4;
+ for (i = 0; i < dma_dev->num_tx_chan; i++) {
+ dma_dev->tx_chan[i].weight = QOS_DEFAULT_WGT;
+ dma_dev->tx_chan[i].desc_num = 10;
+ dma_dev->tx_chan[i].packet_size = 0;
+ dma_dev->tx_chan[i].control = 0;
+ }
+ for (i = 0; i < num_rx_chan; i++) {
+ dma_dev->rx_chan[i].weight = QOS_DEFAULT_WGT;
+ dma_dev->rx_chan[i].desc_num = 10;
+ dma_dev->rx_chan[i].packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
+ dma_dev->rx_chan[i].control = 0;
+ }
+ dma_dev->intr_handler = dma_intr_handler;
+ dma_dev->buffer_alloc = dma_buffer_alloc;
+ dma_dev->buffer_free = dma_buffer_free;
+ return 0;
+}
+
+int switch_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ return OK;
+}
+
+
+int switch_init(struct net_device *dev)
+{
+ u64 retval = 0;
+ int i;
+ int result;
+ struct switch_priv *priv;
+ ether_setup(dev); /* assign some of the fields */
+ printk("%s up using ", dev->name);
+ dev->open = switch_open;
+ dev->stop = switch_release;
+ dev->hard_start_xmit = switch_tx;
+ dev->do_ioctl = switch_ioctl;
+ dev->get_stats = switch_stats;
+ dev->change_mtu = switch_change_mtu;
+ dev->set_mac_address = switch_set_mac_address;
+ dev->tx_timeout = switch_tx_timeout;
+ dev->watchdog_timeo = timeout;
+
+ SET_MODULE_OWNER(dev);
+
+ dev->priv = kmalloc(sizeof(struct switch_priv), GFP_KERNEL);
+ if (dev->priv == NULL)
+ return -ENOMEM;
+ memset(dev->priv, 0, sizeof(struct switch_priv));
+ priv = dev->priv;
+ priv->dma_device = (struct dma_device_info *) kmalloc(sizeof(struct dma_device_info), GFP_KERNEL);
+ if ((dev - switch_devs) == 0) {
+ sprintf(priv->dma_device->device_name, "switch1");
+ } else if ((dev - switch_devs) == 1) {
+ sprintf(priv->dma_device->device_name, "switch2");
+ }
+ printk("\"%s\"\n", priv->dma_device->device_name);
+ init_dma_device(priv->dma_device);
+ result = dma_device_register(priv->dma_device);
+
+ /* read the mac address from the mac table and put them into the mac table. */
+ for (i = 0; i < 6; i++) {
+ retval += my_ethaddr[i];
+ }
+ /* ethaddr not set in u-boot ? */
+ if (retval == 0) {
+ dev->dev_addr[0] = 0x00;
+ dev->dev_addr[1] = 0x20;
+ dev->dev_addr[2] = 0xda;
+ dev->dev_addr[3] = 0x86;
+ dev->dev_addr[4] = 0x23;
+ dev->dev_addr[5] = 0x74 + (unsigned char) (dev - switch_devs);
+ } else {
+ for (i = 0; i < 6; i++) {
+ dev->dev_addr[i] = my_ethaddr[i];
+ }
+ dev->dev_addr[5] += +(unsigned char) (dev - switch_devs);
+ }
+ return OK;
+}
+
+int switch_init_module(void)
+{
+ int i = 0, result, device_present = 0;
+
+ for (i = 0; i < AMAZON_SW_INT_NO; i++) {
+ sprintf(switch_devs[i].name, "eth%d", i);
+
+ if ((result = register_netdev(switch_devs + i)))
+ printk("error %i registering device \"%s\"\n", result, switch_devs[i].name);
+ else
+ device_present++;
+ }
+ amazon_sw_chip_init();
+ return device_present ? 0 : -ENODEV;
+}
+
+void switch_cleanup(void)
+{
+ int i;
+ struct switch_priv *priv;
+ for (i = 0; i < AMAZON_SW_INT_NO; i++) {
+ priv = switch_devs[i].priv;
+ if (priv->dma_device) {
+ dma_device_unregister(priv->dma_device);
+ kfree(priv->dma_device);
+ }
+ kfree(switch_devs[i].priv);
+ unregister_netdev(switch_devs + i);
+ }
+ return;
+}
+
+module_init(switch_init_module);
+module_exit(switch_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wu Qi Ming");
diff --git a/target/linux/amazon/files/drivers/serial/amazon_asc.c b/target/linux/amazon/files/drivers/serial/amazon_asc.c
new file mode 100644
index 0000000..7c17cb0
--- /dev/null
+++ b/target/linux/amazon/files/drivers/serial/amazon_asc.c
@@ -0,0 +1,685 @@
+/*
+ * Driver for AMAZONASC serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/serial_s3c2400.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2004 Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/irq.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/serial.h>
+
+#define PORT_AMAZONASC 111
+
+#include <linux/serial_core.h>
+
+#define UART_NR 1
+
+#define UART_DUMMY_UER_RX 1
+
+#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR
+#define CALLOUT_AMAZONASC_MAJOR TTYAUX_MAJOR
+#define SERIAL_AMAZONASC_MINOR 64
+#define SERIAL_AMAZONASC_NR UART_NR
+
+static void amazonasc_tx_chars(struct uart_port *port);
+extern void prom_printf(const char * fmt, ...);
+static struct uart_port amazonasc_ports[UART_NR];
+static struct uart_driver amazonasc_reg;
+static unsigned int uartclk = 0;
+extern unsigned int amazon_get_fpi_hz(void);
+
+static void amazonasc_stop_tx(struct uart_port *port)
+{
+ /* fifo underrun shuts up after firing once */
+ return;
+}
+
+static void amazonasc_start_tx(struct uart_port *port)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ amazonasc_tx_chars(port);
+ local_irq_restore(flags);
+
+ return;
+}
+
+static void amazonasc_stop_rx(struct uart_port *port)
+{
+ /* clear the RX enable bit */
+ amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON);
+}
+
+static void amazonasc_enable_ms(struct uart_port *port)
+{
+ /* no modem signals */
+ return;
+}
+
+static void
+amazonasc_rx_chars(struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned int ch = 0, rsr = 0, fifocnt;
+
+ fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+ while (fifocnt--)
+ {
+ u8 flag = TTY_NORMAL;
+ ch = amazon_readl(AMAZON_ASC_RBUF);
+ rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX;
+ tty_flip_buffer_push(tty);
+ port->icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (rsr & ASCCON_ANY) {
+ if (rsr & ASCCON_PE) {
+ port->icount.parity++;
+ amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE);
+ } else if (rsr & ASCCON_FE) {
+ port->icount.frame++;
+ amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE);
+ }
+ if (rsr & ASCCON_OE) {
+ port->icount.overrun++;
+ amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE);
+ }
+
+ rsr &= port->read_status_mask;
+
+ if (rsr & ASCCON_PE)
+ flag = TTY_PARITY;
+ else if (rsr & ASCCON_FE)
+ flag = TTY_FRAME;
+ }
+
+ if ((rsr & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (rsr & ASCCON_OE)
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ if (ch != 0)
+ tty_flip_buffer_push(tty);
+
+ return;
+}
+
+
+static void amazonasc_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (uart_tx_stopped(port)) {
+ amazonasc_stop_tx(port);
+ return;
+ }
+
+ while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
+ >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL)
+ {
+ if (port->x_char) {
+ amazon_writel(port->x_char, AMAZON_ASC_TBUF);
+ port->icount.tx++;
+ port->x_char = 0;
+ continue;
+ }
+
+ if (uart_circ_empty(xmit))
+ break;
+
+ amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static irqreturn_t amazonasc_tx_int(int irq, void *port)
+{
+ amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1);
+ amazonasc_start_tx(port);
+
+ /* clear any pending interrupts */
+ amazon_writel_masked(AMAZON_ASC_WHBCON,
+ (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
+ (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t amazonasc_er_int(int irq, void *port)
+{
+ /* clear any pending interrupts */
+ amazon_writel_masked(AMAZON_ASC_WHBCON,
+ (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
+ (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t amazonasc_rx_int(int irq, void *port)
+{
+ amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1);
+ amazonasc_rx_chars((struct uart_port *) port);
+ return IRQ_HANDLED;
+}
+
+static u_int amazonasc_tx_empty(struct uart_port *port)
+{
+ int status;
+
+ /*
+ * FSTAT tells exactly how many bytes are in the FIFO.
+ * The question is whether we really need to wait for all
+ * 16 bytes to be transmitted before reporting that the
+ * transmitter is empty.
+ */
+ status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+ return status ? 0 : TIOCSER_TEMT;
+}
+
+static u_int amazonasc_get_mctrl(struct uart_port *port)
+{
+ /* no modem control signals - the readme says to pretend all are set */
+ return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR;
+}
+
+static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ /* no modem control - just return */
+ return;
+}
+
+static void amazonasc_break_ctl(struct uart_port *port, int break_state)
+{
+ /* no way to send a break */
+ return;
+}
+
+static int amazonasc_startup(struct uart_port *port)
+{
+ unsigned int con = 0;
+ unsigned long flags;
+ int retval;
+
+ /* this assumes: CON.BRS = CON.FDE = 0 */
+ if (uartclk == 0)
+ uartclk = amazon_get_fpi_hz();
+
+ amazonasc_ports[0].uartclk = uartclk;
+
+ local_irq_save(flags);
+
+ /* this setup was probably already done in u-boot */
+ /* ASC and GPIO Port 1 bits 3 and 4 share the same pins
+ * P1.3 (RX) in, Alternate 10
+ * P1.4 (TX) in, Alternate 10
+ */
+ amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); //P1.4 output, P1.3 input
+ amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); //ALTSETL0 11
+ amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0); //ALTSETL1 00
+ amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10);
+
+ /* set up the CLC */
+ amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0);
+ amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET);
+
+ /* asynchronous mode */
+ con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN;
+
+ /* choose the line - there's only one */
+ amazon_writel(0, AMAZON_ASC_PISEL);
+ amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
+ AMAZON_ASC_TXFCON);
+ amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
+ AMAZON_ASC_RXFCON);
+ wmb();
+
+ amazon_writel_masked(AMAZON_ASC_CON, con, con);
+
+ retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port);
+ if (retval){
+ printk("failed to request amazonasc_rx_int\n");
+ return retval;
+ }
+ retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port);
+ if (retval){
+ printk("failed to request amazonasc_tx_int\n");
+ goto err1;
+ }
+
+ retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port);
+ if (retval){
+ printk("failed to request amazonasc_er_int\n");
+ goto err2;
+ }
+
+ local_irq_restore(flags);
+ return 0;
+
+err2:
+ free_irq(AMAZONASC_TIR, port);
+
+err1:
+ free_irq(AMAZONASC_RIR, port);
+ local_irq_restore(flags);
+ return retval;
+}
+
+static void amazonasc_shutdown(struct uart_port *port)
+{
+ free_irq(AMAZONASC_RIR, port);
+ free_irq(AMAZONASC_TIR, port);
+ free_irq(AMAZONASC_EIR, port);
+ /*
+ * disable the baudrate generator to disable the ASC
+ */
+ amazon_writel(0, AMAZON_ASC_CON);
+
+ /* flush and then disable the fifos */
+ amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU);
+ amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0);
+ amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU);
+ amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0);
+}
+
+static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
+{
+ unsigned int cflag;
+ unsigned int iflag;
+ unsigned int baud, quot;
+ unsigned int con = 0;
+ unsigned long flags;
+
+ cflag = new->c_cflag;
+ iflag = new->c_iflag;
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ /* 7 bits are always with parity */
+ case CS7: con = ASCCON_M_7ASYNCPAR; break;
+ /* the ASC only suports 7 and 8 bits */
+ case CS5:
+ case CS6:
+ default:
+ if (cflag & PARENB)
+ con = ASCCON_M_8ASYNCPAR;
+ else
+ con = ASCCON_M_8ASYNC;
+ break;
+ }
+ if (cflag & CSTOPB)
+ con |= ASCCON_STP;
+ if (cflag & PARENB) {
+ if (!(cflag & PARODD))
+ con &= ~ASCCON_ODD;
+ else
+ con |= ASCCON_ODD;
+ }
+
+ port->read_status_mask = ASCCON_OE;
+ if (iflag & INPCK)
+ port->read_status_mask |= ASCCON_FE | ASCCON_PE;
+
+ port->ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ port->ignore_status_mask |= ASCCON_FE | ASCCON_PE;
+
+ if (iflag & IGNBRK) {
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (iflag & IGNPAR)
+ port->ignore_status_mask |= ASCCON_OE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_UER_RX;
+
+ /* set error signals - framing, parity and overrun */
+ con |= ASCCON_FEN;
+ con |= ASCCON_OEN;
+ con |= ASCCON_PEN;
+ /* enable the receiver */
+ con |= ASCCON_REN;
+
+ /* block the IRQs */
+ local_irq_save(flags);
+
+ /* set up CON */
+ amazon_writel(con, AMAZON_ASC_CON);
+
+ /* Set baud rate - take a divider of 2 into account */
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+ quot = quot/2 - 1;
+
+ /* the next 3 probably already happened when we set CON above */
+ /* disable the baudrate generator */
+ amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0);
+ /* make sure the fractional divider is off */
+ amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0);
+ /* set up to use divisor of 2 */
+ amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0);
+ /* now we can write the new baudrate into the register */
+ amazon_writel(quot, AMAZON_ASC_BTR);
+ /* turn the baudrate generator back on */
+ amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R);
+
+ local_irq_restore(flags);
+}
+
+static const char *amazonasc_type(struct uart_port *port)
+{
+ return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void amazonasc_release_port(struct uart_port *port)
+{
+ return;
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int amazonasc_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void amazonasc_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_AMAZONASC;
+ amazonasc_request_port(port);
+ }
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops amazonasc_pops = {
+ .tx_empty = amazonasc_tx_empty,
+ .set_mctrl = amazonasc_set_mctrl,
+ .get_mctrl = amazonasc_get_mctrl,
+ .stop_tx = amazonasc_stop_tx,
+ .start_tx = amazonasc_start_tx,
+ .stop_rx = amazonasc_stop_rx,
+ .enable_ms = amazonasc_enable_ms,
+ .break_ctl = amazonasc_break_ctl,
+ .startup = amazonasc_startup,
+ .shutdown = amazonasc_shutdown,
+ .set_termios = amazonasc_set_termios,
+ .type = amazonasc_type,
+ .release_port = amazonasc_release_port,
+ .request_port = amazonasc_request_port,
+ .config_port = amazonasc_config_port,
+ .verify_port = amazonasc_verify_port,
+};
+
+static struct uart_port amazonasc_ports[UART_NR] = {
+ {
+ membase: (void *)AMAZON_ASC,
+ mapbase: AMAZON_ASC,
+ iotype: SERIAL_IO_MEM,
+ irq: AMAZONASC_RIR, /* RIR */
+ uartclk: 0, /* filled in dynamically */
+ fifosize: 16,
+ unused: { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */
+ type: PORT_AMAZONASC,
+ ops: &amazonasc_pops,
+ flags: ASYNC_BOOT_AUTOCONF,
+ },
+};
+
+static void amazonasc_console_write(struct console *co, const char *s, u_int count)
+{
+ int i, fifocnt;
+ unsigned long flags;
+ local_irq_save(flags);
+ for (i = 0; i < count;)
+ {
+ /* wait until the FIFO is not full */
+ do
+ {
+ fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
+ >> ASCFSTAT_TXFFLOFF;
+ } while (fifocnt == AMAZONASC_TXFIFO_FULL);
+ if (s[i] == '\0')
+ {
+ break;
+ }
+ if (s[i] == '\n')
+ {
+ amazon_writel('\r', AMAZON_ASC_TBUF);
+ do
+ {
+ fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) &
+ ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF;
+ } while (fifocnt == AMAZONASC_TXFIFO_FULL);
+ }
+ amazon_writel(s[i], AMAZON_ASC_TBUF);
+ i++;
+ }
+
+ local_irq_restore(flags);
+}
+
+static void __init
+amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+{
+ u_int lcr_h;
+
+ lcr_h = amazon_readl(AMAZON_ASC_CON);
+ /* do this only if the ASC is turned on */
+ if (lcr_h & ASCCON_R) {
+ u_int quot, div, fdiv, frac;
+
+ *parity = 'n';
+ if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR ||
+ (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) {
+ if (lcr_h & ASCCON_ODD)
+ *parity = 'o';
+ else
+ *parity = 'e';
+ }
+
+ if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR)
+ *bits = 7;
+ else
+ *bits = 8;
+
+ quot = amazon_readl(AMAZON_ASC_BTR) + 1;
+
+ /* this gets hairy if the fractional divider is used */
+ if (lcr_h & ASCCON_FDE)
+ {
+ div = 1;
+ fdiv = amazon_readl(AMAZON_ASC_FDV);
+ if (fdiv == 0)
+ fdiv = 512;
+ frac = 512;
+ }
+ else
+ {
+ div = lcr_h & ASCCON_BRS ? 3 : 2;
+ fdiv = frac = 1;
+ }
+ /*
+ * This doesn't work exactly because we use integer
+ * math to calculate baud which results in rounding
+ * errors when we try to go from quot -> baud !!
+ * Try to make this work for both the fractional divider
+ * and the simple divider. Also try to avoid rounding
+ * errors using integer math.
+ */
+
+ *baud = frac * (port->uartclk / (div * 512 * 16 * quot));
+ if (*baud > 1100 && *baud < 2400)
+ *baud = 1200;
+ if (*baud > 2300 && *baud < 4800)
+ *baud = 2400;
+ if (*baud > 4700 && *baud < 9600)
+ *baud = 4800;
+ if (*baud > 9500 && *baud < 19200)
+ *baud = 9600;
+ if (*baud > 19000 && *baud < 38400)
+ *baud = 19200;
+ if (*baud > 38400 && *baud < 57600)
+ *baud = 38400;
+ if (*baud > 57600 && *baud < 115200)
+ *baud = 57600;
+ if (*baud > 115200 && *baud < 230400)
+ *baud = 115200;
+ }
+}
+
+static int __init amazonasc_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /* this assumes: CON.BRS = CON.FDE = 0 */
+ if (uartclk == 0)
+ uartclk = amazon_get_fpi_hz();
+ co->index = 0;
+ port = &amazonasc_ports[0];
+ amazonasc_ports[0].uartclk = uartclk;
+ amazonasc_ports[0].type = PORT_AMAZONASC;
+
+ if (options){
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ }
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver amazonasc_reg;
+static struct console amazonasc_console = {
+ name: "ttyS",
+ write: amazonasc_console_write,
+ device: uart_console_device,
+ setup: amazonasc_console_setup,
+ flags: CON_PRINTBUFFER,
+ index: -1,
+ data: &amazonasc_reg,
+};
+
+static int __init amazonasc_console_init(void)
+{
+ register_console(&amazonasc_console);
+ return 0;
+}
+console_initcall(amazonasc_console_init);
+
+static struct uart_driver amazonasc_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+ .cons = &amazonasc_console,
+};
+
+static int __init amazonasc_init(void)
+{
+ unsigned char res;
+ uart_register_driver(&amazonasc_reg);
+ res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]);
+ return res;
+}
+
+static void __exit amazonasc_exit(void)
+{
+ uart_unregister_driver(&amazonasc_reg);
+}
+
+module_init(amazonasc_init);
+module_exit(amazonasc_exit);
+
+MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin");
+MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h b/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h
new file mode 100644
index 0000000..77cf4b1
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h
@@ -0,0 +1,232 @@
+/******************************************************************************
+ Copyright (c) 2004, Infineon Technologies. All rights reserved.
+
+ No Warranty
+ Because the program is licensed free of charge, there is no warranty for
+ the program, to the extent permitted by applicable law. Except when
+ otherwise stated in writing the copyright holders and/or other parties
+ provide the program "as is" without warranty of any kind, either
+ expressed or implied, including, but not limited to, the implied
+ warranties of merchantability and fitness for a particular purpose. The
+ entire risk as to the quality and performance of the program is with
+ you. should the program prove defective, you assume the cost of all
+ necessary servicing, repair or correction.
+
+ In no event unless required by applicable law or agreed to in writing
+ will any copyright holder, or any other party who may modify and/or
+ redistribute the program as permitted above, be liable to you for
+ damages, including any general, special, incidental or consequential
+ damages arising out of the use or inability to use the program
+ (including but not limited to loss of data or data being rendered
+ inaccurate or losses sustained by you or third parties or a failure of
+ the program to operate with any other programs), even if such holder or
+ other party has been advised of the possibility of such damages.
+ ******************************************************************************
+ Module : ifx_swdrv.h
+ Date : 2004-09-01
+ Description : JoeLin
+ Remarks:
+
+ *****************************************************************************/
+
+#ifndef _ADM_6996_MODULE_H_
+#define _ADM_6996_MODULE_H_
+
+#include <asm/amazon/amazon.h>
+
+#define ifx_printf(x) printk x
+
+/* command codes */
+#define ADM_SW_SMI_READ 0x02
+#define ADM_SW_SMI_WRITE 0x01
+#define ADM_SW_SMI_START 0x01
+
+#define ADM_SW_EEPROM_WRITE 0x01
+#define ADM_SW_EEPROM_WRITE_ENABLE 0x03
+#define ADM_SW_EEPROM_WRITE_DISABLE 0x00
+#define EEPROM_TYPE 8 /* for 93C66 */
+
+/* bit masks */
+#define ADM_SW_BIT_MASK_1 0x00000001
+#define ADM_SW_BIT_MASK_2 0x00000002
+#define ADM_SW_BIT_MASK_4 0x00000008
+#define ADM_SW_BIT_MASK_10 0x00000200
+#define ADM_SW_BIT_MASK_16 0x00008000
+#define ADM_SW_BIT_MASK_32 0x80000000
+
+/* delay timers */
+#define ADM_SW_MDC_DOWN_DELAY 5
+#define ADM_SW_MDC_UP_DELAY 5
+#define ADM_SW_CS_DELAY 5
+
+/* MDIO modes */
+#define ADM_SW_MDIO_OUTPUT 1
+#define ADM_SW_MDIO_INPUT 0
+
+#define ADM_SW_MAX_PORT_NUM 5
+#define ADM_SW_MAX_VLAN_NUM 15
+
+/* registers */
+#define ADM_SW_PORT0_CONF 0x1
+#define ADM_SW_PORT1_CONF 0x3
+#define ADM_SW_PORT2_CONF 0x5
+#define ADM_SW_PORT3_CONF 0x7
+#define ADM_SW_PORT4_CONF 0x8
+#define ADM_SW_PORT5_CONF 0x9
+#define ADM_SW_VLAN_MODE 0x11
+#define ADM_SW_MAC_LOCK 0x12
+#define ADM_SW_VLAN0_CONF 0x13
+#define ADM_SW_PORT0_PVID 0x28
+#define ADM_SW_PORT1_PVID 0x29
+#define ADM_SW_PORT2_PVID 0x2a
+#define ADM_SW_PORT34_PVID 0x2b
+#define ADM_SW_PORT5_PVID 0x2c
+#define ADM_SW_PHY_RESET 0x2f
+#define ADM_SW_MISC_CONF 0x30
+#define ADM_SW_BNDWDH_CTL0 0x31
+#define ADM_SW_BNDWDH_CTL1 0x32
+#define ADM_SW_BNDWDH_CTL_ENA 0x33
+
+/* port modes */
+#define ADM_SW_PORT_FLOWCTL 0x1 /* 802.3x flow control */
+#define ADM_SW_PORT_AN 0x2 /* auto negotiation */
+#define ADM_SW_PORT_100M 0x4 /* 100M */
+#define ADM_SW_PORT_FULL 0x8 /* full duplex */
+#define ADM_SW_PORT_TAG 0x10 /* output tag on */
+#define ADM_SW_PORT_DISABLE 0x20 /* disable port */
+#define ADM_SW_PORT_TOS 0x40 /* TOS first */
+#define ADM_SW_PORT_PPRI 0x80 /* port based priority first */
+#define ADM_SW_PORT_MDIX 0x8000 /* auto MDIX on */
+#define ADM_SW_PORT_PVID_SHIFT 10
+#define ADM_SW_PORT_PVID_BITS 4
+
+/* VLAN */
+#define ADM_SW_VLAN_PORT0 0x1
+#define ADM_SW_VLAN_PORT1 0x2
+#define ADM_SW_VLAN_PORT2 0x10
+#define ADM_SW_VLAN_PORT3 0x40
+#define ADM_SW_VLAN_PORT4 0x80
+#define ADM_SW_VLAN_PORT5 0x100
+
+
+/* GPIO 012 enabled, output mode */
+#define GPIO_ENABLEBITS 0x000700f8
+
+/*
+ define AMAZON GPIO port to ADM6996 EEPROM interface
+ MDIO -> EEDI GPIO 16, AMAZON GPIO P1.0, bi-direction
+ MDC -> EESK GPIO 17, AMAZON GPIO P1.1, output only
+ MDCS -> EECS GPIO 18, AMAZON GPIO P1.2, output only
+ EEDO GPIO 15, AMAZON GPIO P0.15, do not need this one! */
+
+#define GPIO_MDIO 1 //P1.0
+#define GPIO_MDC 2 //P1.1
+#define GPIO_MDCS 4 //P1.2
+
+//joelin #define GPIO_MDIO 0
+//joelin #define GPIO_MDC 5 /* PORT 0 GPIO5 */
+//joelin #define GPIO_MDCS 6 /* PORT 0 GPIO6 */
+
+
+#define MDIO_INPUT 0x00000001
+#define MDIO_OUTPUT_EN 0x00010000
+
+
+/* type definitions */
+typedef unsigned char U8;
+typedef unsigned short U16;
+typedef unsigned int U32;
+
+typedef struct _REGRW_
+{
+ unsigned int addr;
+ unsigned int value;
+ unsigned int mode;
+}REGRW, *PREGRW;
+
+//joelin adm6996i
+typedef struct _MACENTRY_
+{
+ unsigned char mac_addr[6];
+ unsigned long fid:4;
+ unsigned long portmap:6;
+ union {
+ unsigned long age_timer:9;
+ unsigned long info_ctrl:9;
+ } ctrl;
+ unsigned long occupy:1;
+ unsigned long info_type:1;
+ unsigned long bad:1;
+ unsigned long result:3;//000:command ok ,001:all entry used,010:Entry Not found ,011:try next entry ,101:command error
+
+ }MACENTRY, *PMACENTRY;
+typedef struct _PROTOCOLFILTER_
+{
+ int protocol_filter_num;//[0~7]
+ int ip_p; //Value Compared with Protocol in IP Heade[7:0]
+ char action:2;//Action for protocol Filter .
+//00 = Protocol Portmap is Default Output Ports.
+//01 = Protocol Portmap is 6'b0.
+//10 = Protocol Portmap is the CPU port if the incoming port
+//is not the CPU port. But if the incoming port is the CPU port, then Type Portmap contains Default Output Ports, excluding the CPU port.
+ }PROTOCOLFILTER, *PPROTOCOLFILTER;
+
+//joelin adm6996i
+
+/* Santosh: for IGMP proxy/snooping */
+
+//050614:fchang int adm_process_mac_table_request (unsigned int cmd, struct _MACENTRY_ *mac);
+//050614:fchang int adm_process_protocol_filter_request (unsigned int cmd, struct _PROTOCOLFILTER_ *filter);
+
+
+/* IOCTL keys */
+#define KEY_IOCTL_ADM_REGRW 0x01
+#define KEY_IOCTL_ADM_SW_REGRW 0x02
+#define KEY_IOCTL_ADM_SW_PORTSTS 0x03
+#define KEY_IOCTL_ADM_SW_INIT 0x04
+//for adm6996i-start
+#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD 0x05
+#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL 0x06
+#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT 0x07
+#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE 0x08
+#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD 0x09
+#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL 0x0a
+#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET 0x0b
+
+//adm6996i #define KEY_IOCTL_MAX_KEY 0x05
+#define KEY_IOCTL_MAX_KEY 0x0c
+//for adm6996i-end
+/* IOCTL MAGIC */
+#define ADM_MAGIC ('a'|'d'|'m'|'t'|'e'|'k')
+
+/* IOCTL parameters */
+#define ADM_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_REGRW, REGRW)
+#define ADM_SW_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_REGRW, REGRW)
+#define ADM_SW_IOCTL_PORTSTS _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_PORTSTS, NULL)
+#define ADM_SW_IOCTL_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_INIT, NULL)
+
+
+//6996i-stat
+#define ADM_SW_IOCTL_MACENTRY_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD,MACENTRY)
+#define ADM_SW_IOCTL_MACENTRY_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL,MACENTRY)
+#define ADM_SW_IOCTL_MACENTRY_GET_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT,MACENTRY)
+#define ADM_SW_IOCTL_MACENTRY_GET_MORE _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE,MACENTRY)
+#define ADM_SW_IOCTL_FILTER_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD,PROTOCOLFILTER)
+#define ADM_SW_IOCTL_FILTER_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL,PROTOCOLFILTER)
+#define ADM_SW_IOCTL_FILTER_GET _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET,PROTOCOLFILTER)
+
+//6996i-end
+
+
+#define REG_READ 0x0
+#define REG_WRITE 0x1
+
+/* undefine symbol */
+#define AMAZON_SW_REG(reg) *((volatile U32*)(reg))
+//#define GPIO0_INPUT_MASK 0
+//#define GPIO_conf0_REG 0x12345678
+//#define GPIO_SET_HI
+//#define GPIO_SET_LOW
+
+#endif
+/* _ADM_6996_MODULE_H_ */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon.h
new file mode 100644
index 0000000..d28bb41
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon.h
@@ -0,0 +1,1440 @@
+#ifndef AMAZON_H
+#define AMAZON_H
+/******************************************************************************
+ Copyright (c) 2002, Infineon Technologies. All rights reserved.
+
+ No Warranty
+ Because the program is licensed free of charge, there is no warranty for
+ the program, to the extent permitted by applicable law. Except when
+ otherwise stated in writing the copyright holders and/or other parties
+ provide the program "as is" without warranty of any kind, either
+ expressed or implied, including, but not limited to, the implied
+ warranties of merchantability and fitness for a particular purpose. The
+ entire risk as to the quality and performance of the program is with
+ you. should the program prove defective, you assume the cost of all
+ necessary servicing, repair or correction.
+
+ In no event unless required by applicable law or agreed to in writing
+ will any copyright holder, or any other party who may modify and/or
+ redistribute the program as permitted above, be liable to you for
+ damages, including any general, special, incidental or consequential
+ damages arising out of the use or inability to use the program
+ (including but not limited to loss of data or data being rendered
+ inaccurate or losses sustained by you or third parties or a failure of
+ the program to operate with any other programs), even if such holder or
+ other party has been advised of the possibility of such damages.
+******************************************************************************/
+
+#define amazon_readl(a) readl(((u32*)(a)))
+#define amazon_writel(a,b) writel(a, ((u32*)(b)))
+#define amazon_writel_masked(a,b,c) writel((readl(((u32*)(a))) & ~b) | (c & b), ((u32*)(a)))
+
+/* check ADSL link status */
+#define AMAZON_CHECK_LINK
+
+/***********************************************************************/
+/* Module : WDT register address and bits */
+/***********************************************************************/
+
+#define AMAZON_WDT (KSEG1+0x10100900)
+/***********************************************************************/
+
+/***Reset Request Register***/
+#define AMAZON_RST_REQ ((volatile u32*)(AMAZON_WDT+ 0x0010))
+#define AMAZON_RST_REQ_PLL (1 << 31)
+#define AMAZON_RST_REQ_PCI_CORE (1 << 13)
+#define AMAZON_RST_REQ_TPE (1 << 12)
+#define AMAZON_RST_REQ_AFE (1 << 11)
+#define AMAZON_RST_REQ_DMA (1 << 9)
+#define AMAZON_RST_REQ_SWITCH (1 << 8)
+#define AMAZON_RST_REQ_DFE (1 << 7)
+#define AMAZON_RST_REQ_PHY (1 << 5)
+#define AMAZON_RST_REQ_PCI (1 << 4)
+#define AMAZON_RST_REQ_FPI (1 << 2)
+#define AMAZON_RST_REQ_CPU (1 << 1)
+#define AMAZON_RST_REQ_HRST (1 << 0)
+#define AMAZON_RST_ALL (AMAZON_RST_REQ_PLL \
+ |AMAZON_RST_REQ_PCI_CORE \
+ |AMAZON_RST_REQ_TPE \
+ |AMAZON_RST_REQ_AFE \
+ |AMAZON_RST_REQ_DMA \
+ |AMAZON_RST_REQ_SWITCH \
+ |AMAZON_RST_REQ_DFE \
+ |AMAZON_RST_REQ_PHY \
+ |AMAZON_RST_REQ_PCI \
+ |AMAZON_RST_REQ_FPI \
+ |AMAZON_RST_REQ_CPU \
+ |AMAZON_RST_REQ_HRST)
+
+/***Reset Status Register Power On***/
+#define AMAZON_RST_SR ((volatile u32*)(AMAZON_WDT+ 0x0014))
+
+/***Watchdog Timer Control Register 0***/
+#define AMAZON_WDT_CON0 ((volatile u32*)(AMAZON_WDT+ 0x0020))
+
+/***Watchdog Timer Control Register 1***/
+#define AMAZON_WDT_CON1 ((volatile u32*)(AMAZON_WDT+ 0x0024))
+#define AMAZON_WDT_CON1_WDTDR (1 << 3)
+#define AMAZON_WDT_CON1_WDTIR (1 << 2)
+
+/***Watchdog Timer Status Register***/
+#define AMAZON_WDT_SR ((volatile u32*)(AMAZON_WDT+ 0x0028))
+#define AMAZON_WDT_SR_WDTTIM(value) (((( 1 << 16) - 1) & (value)) << 16)
+#define AMAZON_WDT_SR_WDTPR (1 << 5)
+#define AMAZON_WDT_SR_WDTTO (1 << 4)
+#define AMAZON_WDT_SR_WDTDS (1 << 3)
+#define AMAZON_WDT_SR_WDTIS (1 << 2)
+#define AMAZON_WDT_SR_WDTOE (1 << 1)
+#define AMAZON_WDT_SR_WDTAE (1 << 0)
+
+/***NMI Status Register***/
+#define AMAZON_WDT_NMISR ((volatile u32*)(AMAZON_WDT+ 0x002C))
+#define AMAZON_WDT_NMISR_NMIWDT (1 << 2)
+#define AMAZON_WDT_NMISR_NMIPLL (1 << 1)
+#define AMAZON_WDT_NMISR_NMIEXT (1 << 0)
+
+#define AMAZON_WDT_RST_MON ((volatile u32*)(AMAZON_WDT+ 0x0030))
+
+/***********************************************************************/
+/* Module : MCD register address and bits */
+/***********************************************************************/
+#define AMAZON_MCD (KSEG1+0x1F106000)
+
+/***Manufacturer Identification Register***/
+#define AMAZON_MCD_MANID ((volatile u32*)(AMAZON_MCD+ 0x0024))
+#define AMAZON_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5)
+
+/***Chip Identification Register***/
+#define AMAZON_MCD_CHIPID ((volatile u32*)(AMAZON_MCD+ 0x0028))
+#define AMAZON_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
+#define AMAZON_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
+#define AMAZON_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1))
+#define AMAZON_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
+#define AMAZON_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1))
+#define AMAZON_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1)
+
+#define AMAZON_CHIPID_STANDARD 0x00EB
+#define AMAZON_CHIPID_YANGTSE 0x00ED
+
+/***Redesign Tracing Identification Register***/
+#define AMAZON_MCD_RTID ((volatile u32*)(AMAZON_MCD+ 0x002C))
+#define AMAZON_MCD_RTID_LC (1 << 15)
+#define AMAZON_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+
+/***********************************************************************/
+/* Module : CGU register address and bits */
+/***********************************************************************/
+
+#define AMAZON_CGU (KSEG1+0x1F103000)
+/***********************************************************************/
+
+/***CGU Clock Divider Select Register***/
+#define AMAZON_CGU_DIV (AMAZON_CGU + 0x0000)
+/***CGU PLL0 Status Register***/
+#define AMAZON_CGU_PLL0SR (AMAZON_CGU + 0x0004)
+/***CGU PLL1 Status Register***/
+#define AMAZON_CGU_PLL1SR (AMAZON_CGU + 0x0008)
+/***CGU Interface Clock Control Register***/
+#define AMAZON_CGU_IFCCR (AMAZON_CGU + 0x000c)
+/***CGU Oscillator Control Register***/
+#define AMAZON_CGU_OSCCR (AMAZON_CGU + 0x0010)
+/***CGU Memory Clock Delay Register***/
+#define AMAZON_CGU_MCDEL (AMAZON_CGU + 0x0014)
+/***CGU CPU Clock Reduction Register***/
+#define AMAZON_CGU_CPUCRD (AMAZON_CGU + 0x0018)
+/***CGU Test Register**/
+#define AMAZON_CGU_TST (AMAZON_CGU + 0x003c)
+
+/***********************************************************************/
+/* Module : PMU register address and bits */
+/***********************************************************************/
+
+#define AMAZON_PMU AMAZON_CGU
+/***********************************************************************/
+
+
+/***PMU Power Down Control Register***/
+#define AMAZON_PMU_PWDCR ((volatile u32*)(AMAZON_PMU+ 0x001c))
+#define AMAZON_PMU_PWDCR_TPE (1 << 13)
+#define AMAZON_PMU_PWDCR_PLL (1 << 12)
+#define AMAZON_PMU_PWDCR_XTAL (1 << 11)
+#define AMAZON_PMU_PWDCR_EBU (1 << 10)
+#define AMAZON_PMU_PWDCR_DFE (1 << 9)
+#define AMAZON_PMU_PWDCR_SPI (1 << 8)
+#define AMAZON_PMU_PWDCR_UART (1 << 7)
+#define AMAZON_PMU_PWDCR_GPT (1 << 6)
+#define AMAZON_PMU_PWDCR_DMA (1 << 5)
+#define AMAZON_PMU_PWDCR_PCI (1 << 4)
+#define AMAZON_PMU_PWDCR_SW (1 << 3)
+#define AMAZON_PMU_PWDCR_IOR (1 << 2)
+#define AMAZON_PMU_PWDCR_FPI (1 << 1)
+#define AMAZON_PMU_PWDCR_EPHY (1 << 0)
+
+/***PMU Status Register***/
+#define AMAZON_PMU_SR ((volatile u32*)(AMAZON_PMU+ 0x0020))
+#define AMAZON_PMU_SR_TPE (1 << 13)
+#define AMAZON_PMU_SR_PLL (1 << 12)
+#define AMAZON_PMU_SR_XTAL (1 << 11)
+#define AMAZON_PMU_SR_EBU (1 << 10)
+#define AMAZON_PMU_SR_DFE (1 << 9)
+#define AMAZON_PMU_SR_SPI (1 << 8)
+#define AMAZON_PMU_SR_UART (1 << 7)
+#define AMAZON_PMU_SR_GPT (1 << 6)
+#define AMAZON_PMU_SR_DMA (1 << 5)
+#define AMAZON_PMU_SR_PCI (1 << 4)
+#define AMAZON_PMU_SR_SW (1 << 3)
+#define AMAZON_PMU_SR_IOR (1 << 2)
+#define AMAZON_PMU_SR_FPI (1 << 1)
+#define AMAZON_PMU_SR_EPHY (1 << 0)
+
+/***********************************************************************/
+/* Module : BCU register address and bits */
+/***********************************************************************/
+
+#define AMAZON_BCU (KSEG1+0x10100000)
+/***********************************************************************/
+
+
+/***BCU Control Register (0010H)***/
+#define AMAZON_BCU_CON ((volatile u32*)(AMAZON_BCU+ 0x0010))
+#define AMAZON_BCU_CON_SPC(value) (((( 1 << 8) - 1) & (value)) << 24)
+#define AMAZON_BCU_CON_SPE (1 << 19)
+#define AMAZON_BCU_CON_PSE (1 << 18)
+#define AMAZON_BCU_CON_DBG (1 << 16)
+#define AMAZON_BCU_CON_TOUT(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***BCU Error Control Capture Register (0020H)***/
+#define AMAZON_BCU_ECON ((volatile u32*)(AMAZON_BCU+ 0x0020))
+#define AMAZON_BCU_ECON_TAG(value) (((( 1 << 4) - 1) & (value)) << 24)
+#define AMAZON_BCU_ECON_RDN (1 << 23)
+#define AMAZON_BCU_ECON_WRN (1 << 22)
+#define AMAZON_BCU_ECON_SVM (1 << 21)
+#define AMAZON_BCU_ECON_ACK(value) (((( 1 << 2) - 1) & (value)) << 19)
+#define AMAZON_BCU_ECON_ABT (1 << 18)
+#define AMAZON_BCU_ECON_RDY (1 << 17)
+#define AMAZON_BCU_ECON_TOUT (1 << 16)
+#define AMAZON_BCU_ECON_ERRCNT(value) (((( 1 << 16) - 1) & (value)) << 0)
+#define AMAZON_BCU_ECON_OPC(value) (((( 1 << 4) - 1) & (value)) << 28)
+
+/***BCU Error Address Capture Register (0024 H)***/
+#define AMAZON_BCU_EADD ((volatile u32*)(AMAZON_BCU+ 0x0024))
+#define AMAZON_BCU_EADD_FPIADR
+
+/***BCU Error Data Capture Register (0028H)***/
+#define AMAZON_BCU_EDAT ((volatile u32*)(AMAZON_BCU+ 0x0028))
+#define AMAZON_BCU_EDAT_FPIDAT
+
+/***********************************************************************/
+/* Module : Switch register address and bits */
+/***********************************************************************/
+
+#define AMAZON_SWITCH (KSEG1+0x10106000)
+/***********************************************************************/
+#define AMAZON_SW_UN_DEST AMAZON_SWITCH+0x00 /*Unknown destination register*/
+#define AMAZON_SW_VLAN_CTRL AMAZON_SWITCH+0x04 /*VLAN control register*/
+#define AMAZON_SW_PS_CTL AMAZON_SWITCH+0x08 /*port status control register*/
+#define AMAZON_SW_COS_CTL AMAZON_SWITCH+0x0c /*Cos control register*/
+#define AMAZON_SW_VLAN_COS AMAZON_SWITCH+0x10 /*VLAN priority cos mapping register*/
+#define AMAZON_SW_DSCP_COS3 AMAZON_SWITCH+0x14 /*DSCP cos mapping register3*/
+#define AMAZON_SW_DSCP_COS2 AMAZON_SWITCH+0x18 /*DSCP cos mapping register2*/
+#define AMAZON_SW_DSCP_COS1 AMAZON_SWITCH+0x1c /*DSCP cos mapping register1*/
+#define AMAZON_SW_DSCP_COS0 AMAZON_SWITCH+0x20 /*DSCP cos mapping register*/
+#define AMAZON_SW_ARL_CTL AMAZON_SWITCH+0x24 /*ARL control register*/
+#define AMAZON_SW_PKT_LEN AMAZON_SWITCH+0x28 /*packet length register*/
+#define AMAZON_SW_CPU_ACTL AMAZON_SWITCH+0x2c /*CPU control register1*/
+#define AMAZON_SW_DATA1 AMAZON_SWITCH+0x30 /*CPU access control register1*/
+#define AMAZON_SW_DATA2 AMAZON_SWITCH+0x34 /*CPU access control register2*/
+#define AMAZON_SW_P2_PCTL AMAZON_SWITCH+0x38 /*Port2 control register*/
+#define AMAZON_SW_P0_TX_CTL AMAZON_SWITCH+0x3c /*port0 TX control register*/
+#define AMAZON_SW_P1_TX_CTL AMAZON_SWITCH+0x40 /*port 1 TX control register*/
+#define AMAZON_SW_P0_WM AMAZON_SWITCH+0x44 /*port 0 watermark control register*/
+#define AMAZON_SW_P1_WM AMAZON_SWITCH+0x48 /*port 1 watermark control register*/
+#define AMAZON_SW_P2_WM AMAZON_SWITCH+0x4c /*port 2 watermark control register*/
+#define AMAZON_SW_GBL_WM AMAZON_SWITCH+0x50 /*Global watermark register*/
+#define AMAZON_SW_PM_CTL AMAZON_SWITCH+0x54 /*PM control register*/
+#define AMAZON_SW_P2_CTL AMAZON_SWITCH+0x58 /*PMAC control register*/
+#define AMAZON_SW_P2_TX_IPG AMAZON_SWITCH+0x5c /*port2 TX IPG control register*/
+#define AMAZON_SW_P2_RX_IPG AMAZON_SWITCH+0x60 /*prot2 RX IPG control register*/
+#define AMAZON_SW_MDIO_ACC AMAZON_SWITCH+0x64 /*MDIO access register*/
+#define AMAZON_SW_EPHY AMAZON_SWITCH+0x68 /*Ethernet PHY register*/
+#define AMAZON_SW_MDIO_CFG AMAZON_SWITCH+0x6c /*MDIO configuration register*/
+#define AMAZON_SW_P0_RCV_DROP_CNT AMAZON_SWITCH+0x70 /*port0 receive drop counter */
+#define AMAZON_SW_P0_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x74 /*port0 receive frame error conter*/
+#define AMAZON_SW_P0_TX_COLL_CNT AMAZON_SWITCH+0x78 /*port0 transmit collision counter*/
+#define AMAZON_SW_P0_TX_DROP_CNT AMAZON_SWITCH+0x7c /*port1 transmit drop counter*/
+#define AMAZON_SW_P1_RCV_DROP_CNT AMAZON_SWITCH+0x80 /*port1 receive drop counter*/
+#define AMAZON_SW_P1_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x84 /*port1 receive error counter*/
+#define AMAZON_SW_P1_TX_COLL_CNT AMAZON_SWITCH+0x88 /*port1 transmit collision counter*/
+#define AMAZON_SW_P1_TX_DROP_CNT AMAZON_SWITCH+0x8c /*port1 transmit drop counter*/
+
+
+
+/***********************************************************************/
+/* Module : SSC register address and bits */
+/***********************************************************************/
+#define AMAZON_SSC_BASE_ADD_0 (KSEG1+0x10100800)
+
+/*165001:henryhsu:20050603:Source add by Bing Tao*/
+
+/*configuration/Status Registers in Bus Clock Domain*/
+#define AMAZON_SSC_CLC ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0000))
+#define AMAZON_SSC_ID ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0008))
+#define AMAZON_SSC_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0010))
+#define AMAZON_SSC_STATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0014))
+#define AMAZON_SSC_WHBSTATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0018))
+#define AMAZON_SSC_TB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0020))
+#define AMAZON_SSC_RB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0024))
+#define AMAZON_SSC_FSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0038))
+
+/*Configuration/Status Registers in Kernel Clock Domain*/
+#define AMAZON_SSC_PISEL ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0004))
+#define AMAZON_SSC_RXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0030))
+#define AMAZON_SSC_TXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0034))
+#define AMAZON_SSC_BR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0040))
+#define AMAZON_SSC_BRSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0044))
+#define AMAZON_SSC_SFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0060))
+#define AMAZON_SSC_SFSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0064))
+#define AMAZON_SSC_GPOCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0070))
+#define AMAZON_SSC_GPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0074))
+#define AMAZON_SSC_WHBGPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0078))
+#define AMAZON_SSC_RXREQ ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0080))
+#define AMAZON_SSC_RXCNT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0084))
+
+/*DMA Registers in Bus Clock Domain*/
+#define AMAZON_SSC_DMA_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00ec))
+
+/*interrupt Node Registers in Bus Clock Domain*/
+#define AMAZON_SSC_IRNEN ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F4))
+#define AMAZON_SSC_IRNICR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00FC))
+#define AMAZON_SSC_IRNCR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F8))
+
+/*165001*/
+
+/***********************************************************************/
+
+
+
+/***********************************************************************/
+/* Module : EBU register address and bits */
+/***********************************************************************/
+
+#define AMAZON_EBU (KSEG1+0x10105300)
+/***********************************************************************/
+
+
+/***EBU Clock Control Register***/
+#define AMAZON_EBU_CLC ((volatile u32*)(AMAZON_EBU+ 0x0000))
+#define AMAZON_EBU_CLC_DISS (1 << 1)
+#define AMAZON_EBU_CLC_DISR (1 << 0)
+
+/***EBU Global Control Register***/
+#define AMAZON_EBU_CON ((volatile u32*)(AMAZON_EBU+ 0x0010))
+#define AMAZON_EBU_CON_DTACS(value) (((( 1 << 3) - 1) & (value)) << 20)
+#define AMAZON_EBU_CON_DTARW(value) (((( 1 << 3) - 1) & (value)) << 16)
+#define AMAZON_EBU_CON_TOUTC(value) (((( 1 << 8) - 1) & (value)) << 8)
+#define AMAZON_EBU_CON_ARBMODE(value) (((( 1 << 2) - 1) & (value)) << 6)
+#define AMAZON_EBU_CON_ARBSYNC (1 << 5)
+#define AMAZON_EBU_CON_1 (1 << 3)
+
+/***EBU Address Select Register 0***/
+#define AMAZON_EBU_ADDSEL0 ((volatile u32*)(AMAZON_EBU+ 0x0020))
+#define AMAZON_EBU_ADDSEL0_BASE(value) (((( 1 << 20) - 1) & (value)) << 12)
+#define AMAZON_EBU_ADDSEL0_MASK(value) (((( 1 << 4) - 1) & (value)) << 4)
+#define AMAZON_EBU_ADDSEL0_MIRRORE (1 << 1)
+#define AMAZON_EBU_ADDSEL0_REGEN (1 << 0)
+
+/***EBU Address Select Register 1***/
+#define AMAZON_EBU_ADDSEL1 ((volatile u32*)(AMAZON_EBU+ 0x0024))
+#define AMAZON_EBU_ADDSEL1_BASE(value) (((( 1 << 20) - 1) & (value)) << 12)
+#define AMAZON_EBU_ADDSEL1_MASK(value) (((( 1 << 4) - 1) & (value)) << 4)
+#define AMAZON_EBU_ADDSEL1_MIRRORE (1 << 1)
+#define AMAZON_EBU_ADDSEL1_REGEN (1 << 0)
+
+/***EBU Address Select Register 2***/
+#define AMAZON_EBU_ADDSEL2 ((volatile u32*)(AMAZON_EBU+ 0x0028))
+#define AMAZON_EBU_ADDSEL2_BASE(value) (((( 1 << 20) - 1) & (value)) << 12)
+#define AMAZON_EBU_ADDSEL2_MASK(value) (((( 1 << 4) - 1) & (value)) << 4)
+#define AMAZON_EBU_ADDSEL2_MIRRORE (1 << 1)
+#define AMAZON_EBU_ADDSEL2_REGEN (1 << 0)
+
+/***EBU Bus Configuration Register 0***/
+#define AMAZON_EBU_BUSCON0 ((volatile u32*)(AMAZON_EBU+ 0x0060))
+#define AMAZON_EBU_BUSCON0_WRDIS (1 << 31)
+#define AMAZON_EBU_BUSCON0_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29)
+#define AMAZON_EBU_BUSCON0_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27)
+#define AMAZON_EBU_BUSCON0_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24)
+#define AMAZON_EBU_BUSCON0_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22)
+#define AMAZON_EBU_BUSCON0_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20)
+#define AMAZON_EBU_BUSCON0_WAITINV (1 << 19)
+#define AMAZON_EBU_BUSCON0_SETUP (1 << 18)
+#define AMAZON_EBU_BUSCON0_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16)
+#define AMAZON_EBU_BUSCON0_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9)
+#define AMAZON_EBU_BUSCON0_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6)
+#define AMAZON_EBU_BUSCON0_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4)
+#define AMAZON_EBU_BUSCON0_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2)
+#define AMAZON_EBU_BUSCON0_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***EBU Bus Configuration Register 1***/
+#define AMAZON_EBU_BUSCON1 ((volatile u32*)(AMAZON_EBU+ 0x0064))
+#define AMAZON_EBU_BUSCON1_WRDIS (1 << 31)
+#define AMAZON_EBU_BUSCON1_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29)
+#define AMAZON_EBU_BUSCON1_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27)
+#define AMAZON_EBU_BUSCON1_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24)
+#define AMAZON_EBU_BUSCON1_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22)
+#define AMAZON_EBU_BUSCON1_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20)
+#define AMAZON_EBU_BUSCON1_WAITINV (1 << 19)
+#define AMAZON_EBU_BUSCON1_SETUP (1 << 18)
+#define AMAZON_EBU_BUSCON1_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16)
+#define AMAZON_EBU_BUSCON1_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9)
+#define AMAZON_EBU_BUSCON1_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6)
+#define AMAZON_EBU_BUSCON1_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4)
+#define AMAZON_EBU_BUSCON1_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2)
+#define AMAZON_EBU_BUSCON1_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***EBU Bus Configuration Register 2***/
+#define AMAZON_EBU_BUSCON2 ((volatile u32*)(AMAZON_EBU+ 0x0068))
+#define AMAZON_EBU_BUSCON2_WRDIS (1 << 31)
+#define AMAZON_EBU_BUSCON2_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29)
+#define AMAZON_EBU_BUSCON2_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27)
+#define AMAZON_EBU_BUSCON2_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24)
+#define AMAZON_EBU_BUSCON2_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22)
+#define AMAZON_EBU_BUSCON2_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20)
+#define AMAZON_EBU_BUSCON2_WAITINV (1 << 19)
+#define AMAZON_EBU_BUSCON2_SETUP (1 << 18)
+#define AMAZON_EBU_BUSCON2_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16)
+#define AMAZON_EBU_BUSCON2_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9)
+#define AMAZON_EBU_BUSCON2_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6)
+#define AMAZON_EBU_BUSCON2_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4)
+#define AMAZON_EBU_BUSCON2_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2)
+#define AMAZON_EBU_BUSCON2_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : SDRAM register address and bits */
+/***********************************************************************/
+
+#define AMAZON_SDRAM (KSEG1+0x1F800000)
+/***********************************************************************/
+
+
+/***MC Access Error Cause Register***/
+#define AMAZON_SDRAM_MC_ERRCAUSE ((volatile u32*)(AMAZON_SDRAM+ 0x0010))
+#define AMAZON_SDRAM_MC_ERRCAUSE_ERR (1 << 31)
+#define AMAZON_SDRAM_MC_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16)
+#define AMAZON_SDRAM_MC_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0)
+#define AMAZON_SDRAM_MC_ERRCAUSE_Res(value) (((( 1 << NaN) - 1) & (value)) << NaN)
+
+/***MC Access Error Address Register***/
+#define AMAZON_SDRAM_MC_ERRADDR ((volatile u32*)(AMAZON_SDRAM+ 0x0020))
+#define AMAZON_SDRAM_MC_ERRADDR_ADDR
+
+/***MC I/O General Purpose Register***/
+#define AMAZON_SDRAM_MC_IOGP ((volatile u32*)(AMAZON_SDRAM+ 0x0100))
+#define AMAZON_SDRAM_MC_IOGP_GPR6(value) (((( 1 << 4) - 1) & (value)) << 28)
+#define AMAZON_SDRAM_MC_IOGP_GPR5(value) (((( 1 << 4) - 1) & (value)) << 24)
+#define AMAZON_SDRAM_MC_IOGP_GPR4(value) (((( 1 << 4) - 1) & (value)) << 20)
+#define AMAZON_SDRAM_MC_IOGP_GPR3(value) (((( 1 << 4) - 1) & (value)) << 16)
+#define AMAZON_SDRAM_MC_IOGP_GPR2(value) (((( 1 << 4) - 1) & (value)) << 12)
+#define AMAZON_SDRAM_MC_IOGP_CPS (1 << 11)
+#define AMAZON_SDRAM_MC_IOGP_CLKDELAY(value) (((( 1 << 3) - 1) & (value)) << 8)
+#define AMAZON_SDRAM_MC_IOGP_CLKRAT(value) (((( 1 << 4) - 1) & (value)) << 4)
+#define AMAZON_SDRAM_MC_IOGP_RDDEL(value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***MC Self Refresh Register***/
+#define AMAZON_SDRAM_MC_SELFRFSH ((volatile u32*)(AMAZON_SDRAM+ 0x01A0))
+#define AMAZON_SDRAM_MC_SELFRFSH_PWDS (1 << 1)
+#define AMAZON_SDRAM_MC_SELFRFSH_PWD (1 << 0)
+#define AMAZON_SDRAM_MC_SELFRFSH_Res(value) (((( 1 << 30) - 1) & (value)) << 2)
+
+/***MC Enable Register***/
+#define AMAZON_SDRAM_MC_CTRLENA ((volatile u32*)(AMAZON_SDRAM+ 0x0110))
+#define AMAZON_SDRAM_MC_CTRLENA_ENA (1 << 0)
+#define AMAZON_SDRAM_MC_CTRLENA_Res(value) (((( 1 << 31) - 1) & (value)) << 1)
+
+/***MC Mode Register Setup Code***/
+#define AMAZON_SDRAM_MC_MRSCODE ((volatile u32*)(AMAZON_SDRAM+ 0x0120))
+#define AMAZON_SDRAM_MC_MRSCODE_UMC(value) (((( 1 << 5) - 1) & (value)) << 7)
+#define AMAZON_SDRAM_MC_MRSCODE_CL(value) (((( 1 << 3) - 1) & (value)) << 4)
+#define AMAZON_SDRAM_MC_MRSCODE_WT (1 << 3)
+#define AMAZON_SDRAM_MC_MRSCODE_BL(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***MC Configuration Data-word Width Register***/
+#define AMAZON_SDRAM_MC_CFGDW ((volatile u32*)(AMAZON_SDRAM+ 0x0130))
+#define AMAZON_SDRAM_MC_CFGDW_DW(value) (((( 1 << 4) - 1) & (value)) << 0)
+#define AMAZON_SDRAM_MC_CFGDW_Res(value) (((( 1 << 28) - 1) & (value)) << 4)
+
+/***MC Configuration Physical Bank 0 Register***/
+#define AMAZON_SDRAM_MC_CFGPB0 ((volatile u32*)(AMAZON_SDRAM+ 0x140))
+#define AMAZON_SDRAM_MC_CFGPB0_MCSEN0(value) (((( 1 << 4) - 1) & (value)) << 12)
+#define AMAZON_SDRAM_MC_CFGPB0_BANKN0(value) (((( 1 << 4) - 1) & (value)) << 8)
+#define AMAZON_SDRAM_MC_CFGPB0_ROWW0(value) (((( 1 << 4) - 1) & (value)) << 4)
+#define AMAZON_SDRAM_MC_CFGPB0_COLW0(value) (((( 1 << 4) - 1) & (value)) << 0)
+#define AMAZON_SDRAM_MC_CFGPB0_Res(value) (((( 1 << 16) - 1) & (value)) << 16)
+
+/***MC Latency Register***/
+#define AMAZON_SDRAM_MC_LATENCY ((volatile u32*)(AMAZON_SDRAM+ 0x0180))
+#define AMAZON_SDRAM_MC_LATENCY_TRP(value) (((( 1 << 4) - 1) & (value)) << 16)
+#define AMAZON_SDRAM_MC_LATENCY_TRAS(value) (((( 1 << 4) - 1) & (value)) << 12)
+#define AMAZON_SDRAM_MC_LATENCY_TRCD(value) (((( 1 << 4) - 1) & (value)) << 8)
+#define AMAZON_SDRAM_MC_LATENCY_TDPL(value) (((( 1 << 4) - 1) & (value)) << 4)
+#define AMAZON_SDRAM_MC_LATENCY_TDAL(value) (((( 1 << 4) - 1) & (value)) << 0)
+#define AMAZON_SDRAM_MC_LATENCY_Res(value) (((( 1 << 12) - 1) & (value)) << 20)
+
+/***MC Refresh Cycle Time Register***/
+#define AMAZON_SDRAM_MC_TREFRESH ((volatile u32*)(AMAZON_SDRAM+ 0x0190))
+#define AMAZON_SDRAM_MC_TREFRESH_TREF(value) (((( 1 << 13) - 1) & (value)) << 0)
+#define AMAZON_SDRAM_MC_TREFRESH_Res(value) (((( 1 << 19) - 1) & (value)) << 13)
+
+/***********************************************************************/
+/* Module : GPTU register address and bits */
+/***********************************************************************/
+
+#define AMAZON_GPTU (KSEG1+0x10100A00)
+/***********************************************************************/
+
+
+/***GPT Clock Control Register***/
+#define AMAZON_GPTU_CLC ((volatile u32*)(AMAZON_GPTU+ 0x0000))
+#define AMAZON_GPTU_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
+#define AMAZON_GPTU_CLC_DISS (1 << 1)
+#define AMAZON_GPTU_CLC_DISR (1 << 0)
+
+/***GPT Timer 3 Control Register***/
+#define AMAZON_GPTU_T3CON ((volatile u32*)(AMAZON_GPTU+ 0x0014))
+#define AMAZON_GPTU_T3CON_T3RDIR (1 << 15)
+#define AMAZON_GPTU_T3CON_T3CHDIR (1 << 14)
+#define AMAZON_GPTU_T3CON_T3EDGE (1 << 13)
+#define AMAZON_GPTU_T3CON_BPS1(value) (((( 1 << 2) - 1) & (value)) << 11)
+#define AMAZON_GPTU_T3CON_T3OTL (1 << 10)
+#define AMAZON_GPTU_T3CON_T3UD (1 << 7)
+#define AMAZON_GPTU_T3CON_T3R (1 << 6)
+#define AMAZON_GPTU_T3CON_T3M(value) (((( 1 << 3) - 1) & (value)) << 3)
+#define AMAZON_GPTU_T3CON_T3I(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write Hardware Modified Timer 3 Control Register
+If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define AMAZON_GPTU_WHBT3CON ((volatile u32*)(AMAZON_GPTU+ 0x004C))
+#define AMAZON_GPTU_WHBT3CON_SETT3CHDIR (1 << 15)
+#define AMAZON_GPTU_WHBT3CON_CLRT3CHDIR (1 << 14)
+#define AMAZON_GPTU_WHBT3CON_SETT3EDGE (1 << 13)
+#define AMAZON_GPTU_WHBT3CON_CLRT3EDGE (1 << 12)
+#define AMAZON_GPTU_WHBT3CON_SETT3OTL (1 << 11)
+#define AMAZON_GPTU_WHBT3CON_CLRT3OTL (1 << 10)
+
+/***GPT Timer 2 Control Register***/
+#define AMAZON_GPTU_T2CON ((volatile u32*)(AMAZON_GPTU+ 0x0010))
+#define AMAZON_GPTU_T2CON_TxRDIR (1 << 15)
+#define AMAZON_GPTU_T2CON_TxCHDIR (1 << 14)
+#define AMAZON_GPTU_T2CON_TxEDGE (1 << 13)
+#define AMAZON_GPTU_T2CON_TxIRDIS (1 << 12)
+#define AMAZON_GPTU_T2CON_TxRC (1 << 9)
+#define AMAZON_GPTU_T2CON_TxUD (1 << 7)
+#define AMAZON_GPTU_T2CON_TxR (1 << 6)
+#define AMAZON_GPTU_T2CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3)
+#define AMAZON_GPTU_T2CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Timer 4 Control Register***/
+#define AMAZON_GPTU_T4CON ((volatile u32*)(AMAZON_GPTU+ 0x0018))
+#define AMAZON_GPTU_T4CON_TxRDIR (1 << 15)
+#define AMAZON_GPTU_T4CON_TxCHDIR (1 << 14)
+#define AMAZON_GPTU_T4CON_TxEDGE (1 << 13)
+#define AMAZON_GPTU_T4CON_TxIRDIS (1 << 12)
+#define AMAZON_GPTU_T4CON_TxRC (1 << 9)
+#define AMAZON_GPTU_T4CON_TxUD (1 << 7)
+#define AMAZON_GPTU_T4CON_TxR (1 << 6)
+#define AMAZON_GPTU_T4CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3)
+#define AMAZON_GPTU_T4CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write HW Modified Timer 2 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define AMAZON_GPTU_WHBT2CON ((volatile u32*)(AMAZON_GPTU+ 0x0048))
+#define AMAZON_GPTU_WHBT2CON_SETTxCHDIR (1 << 15)
+#define AMAZON_GPTU_WHBT2CON_CLRTxCHDIR (1 << 14)
+#define AMAZON_GPTU_WHBT2CON_SETTxEDGE (1 << 13)
+#define AMAZON_GPTU_WHBT2CON_CLRTxEDGE (1 << 12)
+
+/***GPT Write HW Modified Timer 4 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define AMAZON_GPTU_WHBT4CON ((volatile u32*)(AMAZON_GPTU+ 0x0050))
+#define AMAZON_GPTU_WHBT4CON_SETTxCHDIR (1 << 15)
+#define AMAZON_GPTU_WHBT4CON_CLRTxCHDIR (1 << 14)
+#define AMAZON_GPTU_WHBT4CON_SETTxEDGE (1 << 13)
+#define AMAZON_GPTU_WHBT4CON_CLRTxEDGE (1 << 12)
+
+/***GPT Capture Reload Register***/
+#define AMAZON_GPTU_CAPREL ((volatile u32*)(AMAZON_GPTU+ 0x0030))
+#define AMAZON_GPTU_CAPREL_CAPREL(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 2 Register***/
+#define AMAZON_GPTU_T2 ((volatile u32*)(AMAZON_GPTU+ 0x0034))
+#define AMAZON_GPTU_T2_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 3 Register***/
+#define AMAZON_GPTU_T3 ((volatile u32*)(AMAZON_GPTU+ 0x0038))
+#define AMAZON_GPTU_T3_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 4 Register***/
+#define AMAZON_GPTU_T4 ((volatile u32*)(AMAZON_GPTU+ 0x003C))
+#define AMAZON_GPTU_T4_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 5 Register***/
+#define AMAZON_GPTU_T5 ((volatile u32*)(AMAZON_GPTU+ 0x0040))
+#define AMAZON_GPTU_T5_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 6 Register***/
+#define AMAZON_GPTU_T6 ((volatile u32*)(AMAZON_GPTU+ 0x0044))
+#define AMAZON_GPTU_T6_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 6 Control Register***/
+#define AMAZON_GPTU_T6CON ((volatile u32*)(AMAZON_GPTU+ 0x0020))
+#define AMAZON_GPTU_T6CON_T6SR (1 << 15)
+#define AMAZON_GPTU_T6CON_T6CLR (1 << 14)
+#define AMAZON_GPTU_T6CON_BPS2(value) (((( 1 << 2) - 1) & (value)) << 11)
+#define AMAZON_GPTU_T6CON_T6OTL (1 << 10)
+#define AMAZON_GPTU_T6CON_T6UD (1 << 7)
+#define AMAZON_GPTU_T6CON_T6R (1 << 6)
+#define AMAZON_GPTU_T6CON_T6M(value) (((( 1 << 3) - 1) & (value)) << 3)
+#define AMAZON_GPTU_T6CON_T6I(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write HW Modified Timer 6 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define AMAZON_GPTU_WHBT6CON ((volatile u32*)(AMAZON_GPTU+ 0x0054))
+#define AMAZON_GPTU_WHBT6CON_SETT6OTL (1 << 11)
+#define AMAZON_GPTU_WHBT6CON_CLRT6OTL (1 << 10)
+
+/***GPT Timer 5 Control Register***/
+#define AMAZON_GPTU_T5CON ((volatile u32*)(AMAZON_GPTU+ 0x001C))
+#define AMAZON_GPTU_T5CON_T5SC (1 << 15)
+#define AMAZON_GPTU_T5CON_T5CLR (1 << 14)
+#define AMAZON_GPTU_T5CON_CI(value) (((( 1 << 2) - 1) & (value)) << 12)
+#define AMAZON_GPTU_T5CON_T5CC (1 << 11)
+#define AMAZON_GPTU_T5CON_CT3 (1 << 10)
+#define AMAZON_GPTU_T5CON_T5RC (1 << 9)
+#define AMAZON_GPTU_T5CON_T5UDE (1 << 8)
+#define AMAZON_GPTU_T5CON_T5UD (1 << 7)
+#define AMAZON_GPTU_T5CON_T5R (1 << 6)
+#define AMAZON_GPTU_T5CON_T5M(value) (((( 1 << 3) - 1) & (value)) << 3)
+#define AMAZON_GPTU_T5CON_T5I(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+
+/***********************************************************************/
+/* Module : ASC register address and bits */
+/***********************************************************************/
+
+#define AMAZON_ASC (KSEG1+0x10100400)
+/***********************************************************************/
+
+
+/***ASC Port Input Select Register***/
+#define AMAZON_ASC_PISEL (AMAZON_ASC+ 0x0004)
+#define AMAZON_ASC_PISEL_RIS (1 << 0)
+
+/***ASC Control Register***/
+#define AMAZON_ASC_CON (AMAZON_ASC+ 0x0010)
+#define AMAZON_ASC_CON_R (1 << 15)
+#define AMAZON_ASC_CON_LB (1 << 14)
+#define AMAZON_ASC_CON_BRS (1 << 13)
+#define AMAZON_ASC_CON_ODD (1 << 12)
+#define AMAZON_ASC_CON_FDE (1 << 11)
+#define AMAZON_ASC_CON_OE (1 << 10)
+#define AMAZON_ASC_CON_FE (1 << 9)
+#define AMAZON_ASC_CON_PE (1 << 8)
+#define AMAZON_ASC_CON_OEN (1 << 7)
+#define AMAZON_ASC_CON_FEN (1 << 6)
+#define AMAZON_ASC_CON_PENRXDI (1 << 5)
+#define AMAZON_ASC_CON_REN (1 << 4)
+#define AMAZON_ASC_CON_STP (1 << 3)
+#define AMAZON_ASC_CON_M(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***ASC Write Hardware Modified Control Register***/
+#define AMAZON_ASC_WHBCON (AMAZON_ASC+ 0x0050)
+#define AMAZON_ASC_WHBCON_SETOE (1 << 13)
+#define AMAZON_ASC_WHBCON_SETFE (1 << 12)
+#define AMAZON_ASC_WHBCON_SETPE (1 << 11)
+#define AMAZON_ASC_WHBCON_CLROE (1 << 10)
+#define AMAZON_ASC_WHBCON_CLRFE (1 << 9)
+#define AMAZON_ASC_WHBCON_CLRPE (1 << 8)
+#define AMAZON_ASC_WHBCON_SETREN (1 << 5)
+#define AMAZON_ASC_WHBCON_CLRREN (1 << 4)
+
+/***ASC Baudrate Timer/Reload Register***/
+#define AMAZON_ASC_BTR (AMAZON_ASC+ 0x0014)
+#define AMAZON_ASC_BTR_BR_VALUE(value) (((( 1 << 13) - 1) & (value)) << 0)
+
+/***ASC Fractional Divider Register***/
+#define AMAZON_ASC_FDV (AMAZON_ASC+ 0x0018)
+#define AMAZON_ASC_FDV_FD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC IrDA Pulse Mode/Width Register***/
+#define AMAZON_ASC_PMW (AMAZON_ASC+ 0x001C)
+#define AMAZON_ASC_PMW_IRPW (1 << 8)
+#define AMAZON_ASC_PMW_PW_VALUE(value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***ASC Transmit Buffer Register***/
+#define AMAZON_ASC_TBUF (AMAZON_ASC+ 0x0020)
+#define AMAZON_ASC_TBUF_TD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC Receive Buffer Register***/
+#define AMAZON_ASC_RBUF (AMAZON_ASC+ 0x0024)
+#define AMAZON_ASC_RBUF_RD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC Autobaud Control Register***/
+#define AMAZON_ASC_ABCON (AMAZON_ASC+ 0x0030)
+#define AMAZON_ASC_ABCON_RXINV (1 << 11)
+#define AMAZON_ASC_ABCON_TXINV (1 << 10)
+#define AMAZON_ASC_ABCON_ABEM(value) (((( 1 << 2) - 1) & (value)) << 8)
+#define AMAZON_ASC_ABCON_FCDETEN (1 << 4)
+#define AMAZON_ASC_ABCON_ABDETEN (1 << 3)
+#define AMAZON_ASC_ABCON_ABSTEN (1 << 2)
+#define AMAZON_ASC_ABCON_AUREN (1 << 1)
+#define AMAZON_ASC_ABCON_ABEN (1 << 0)
+
+/***Receive FIFO Control Register***/
+#define AMAZON_ASC_RXFCON (AMAZON_ASC+ 0x0040)
+#define AMAZON_ASC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define AMAZON_ASC_RXFCON_RXTMEN (1 << 2)
+#define AMAZON_ASC_RXFCON_RXFFLU (1 << 1)
+#define AMAZON_ASC_RXFCON_RXFEN (1 << 0)
+
+/***Transmit FIFO Control Register***/
+#define AMAZON_ASC_TXFCON (AMAZON_ASC+ 0x0044)
+#define AMAZON_ASC_TXFCON_TXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define AMAZON_ASC_TXFCON_TXTMEN (1 << 2)
+#define AMAZON_ASC_TXFCON_TXFFLU (1 << 1)
+#define AMAZON_ASC_TXFCON_TXFEN (1 << 0)
+
+/***FIFO Status Register***/
+#define AMAZON_ASC_FSTAT (AMAZON_ASC+ 0x0048)
+#define AMAZON_ASC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define AMAZON_ASC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0)
+
+/***ASC Write HW Modified Autobaud Control Register***/
+#define AMAZON_ASC_WHBABCON (AMAZON_ASC+ 0x0054)
+#define AMAZON_ASC_WHBABCON_SETABEN (1 << 1)
+#define AMAZON_ASC_WHBABCON_CLRABEN (1 << 0)
+
+/***ASC Autobaud Status Register***/
+#define AMAZON_ASC_ABSTAT (AMAZON_ASC+ 0x0034)
+#define AMAZON_ASC_ABSTAT_DETWAIT (1 << 4)
+#define AMAZON_ASC_ABSTAT_SCCDET (1 << 3)
+#define AMAZON_ASC_ABSTAT_SCSDET (1 << 2)
+#define AMAZON_ASC_ABSTAT_FCCDET (1 << 1)
+#define AMAZON_ASC_ABSTAT_FCSDET (1 << 0)
+
+/***ASC Write HW Modified Autobaud Status Register***/
+#define AMAZON_ASC_WHBABSTAT (AMAZON_ASC+ 0x0058)
+#define AMAZON_ASC_WHBABSTAT_SETDETWAIT (1 << 9)
+#define AMAZON_ASC_WHBABSTAT_CLRDETWAIT (1 << 8)
+#define AMAZON_ASC_WHBABSTAT_SETSCCDET (1 << 7)
+#define AMAZON_ASC_WHBABSTAT_CLRSCCDET (1 << 6)
+#define AMAZON_ASC_WHBABSTAT_SETSCSDET (1 << 5)
+#define AMAZON_ASC_WHBABSTAT_CLRSCSDET (1 << 4)
+#define AMAZON_ASC_WHBABSTAT_SETFCCDET (1 << 3)
+#define AMAZON_ASC_WHBABSTAT_CLRFCCDET (1 << 2)
+#define AMAZON_ASC_WHBABSTAT_SETFCSDET (1 << 1)
+#define AMAZON_ASC_WHBABSTAT_CLRFCSDET (1 << 0)
+
+/***ASC Clock Control Register***/
+#define AMAZON_ASC_CLC (AMAZON_ASC+ 0x0000)
+#define AMAZON_ASC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
+#define AMAZON_ASC_CLC_DISS (1 << 1)
+#define AMAZON_ASC_CLC_DISR (1 << 0)
+
+/***ASC IRNCR0 **/
+#define AMAZON_ASC_IRNCR0 (AMAZON_ASC+ 0x00FC)
+/***ASC IRNCR1 **/
+#define AMAZON_ASC_IRNCR1 (AMAZON_ASC+ 0x00F8)
+#define ASC_IRNCR_TIR 0x1
+#define ASC_IRNCR_RIR 0x2
+#define ASC_IRNCR_EIR 0x4
+/***********************************************************************/
+/* Module : DMA register address and bits */
+/***********************************************************************/
+
+#define AMAZON_DMA (KSEG1+0x10103000)
+/***********************************************************************/
+#define AMAZON_DMA_CH_ON AMAZON_DMA+0x28
+#define AMAZON_DMA_CH_RST AMAZON_DMA+0x2c
+#define AMAZON_DMA_CH0_ISR AMAZON_DMA+0x30
+#define AMAZON_DMA_CH1_ISR AMAZON_DMA+0x34
+#define AMAZON_DMA_CH2_ISR AMAZON_DMA+0x38
+#define AMAZON_DMA_CH3_ISR AMAZON_DMA+0x3c
+#define AMAZON_DMA_CH4_ISR AMAZON_DMA+0x40
+#define AMAZON_DMA_CH5_ISR AMAZON_DMA+0x44
+#define AMAZON_DMA_CH6_ISR AMAZON_DMA+0x48
+#define AMAZON_DMA_CH7_ISR AMAZON_DMA+0x4c
+#define AMAZON_DMA_CH8_ISR AMAZON_DMA+0x50
+#define AMAZON_DMA_CH9_ISR AMAZON_DMA+0x54
+#define AMAZON_DMA_CH10_ISR AMAZON_DMA+0x58
+#define AMAZON_DMA_CH11_ISR AMAZON_DMA+0x5c
+#define AMAZON_DMA_CH0_MSK AMAZON_DMA+0x60
+#define AMAZON_DMA_CH1_MSK AMAZON_DMA+0x64
+#define AMAZON_DMA_CH2_MSK AMAZON_DMA+0x68
+#define AMAZON_DMA_CH3_MSK AMAZON_DMA+0x6c
+#define AMAZON_DMA_CH4_MSK AMAZON_DMA+0x70
+#define AMAZON_DMA_CH5_MSK AMAZON_DMA+0x74
+#define AMAZON_DMA_CH6_MSK AMAZON_DMA+0x78
+#define AMAZON_DMA_CH7_MSK AMAZON_DMA+0x7c
+#define AMAZON_DMA_CH8_MSK AMAZON_DMA+0x80
+#define AMAZON_DMA_CH9_MSK AMAZON_DMA+0x84
+#define AMAZON_DMA_CH10_MSK AMAZON_DMA+0x88
+#define AMAZON_DMA_CH11_MSK AMAZON_DMA+0x8c
+#define AMAZON_DMA_Desc_BA AMAZON_DMA+0x90
+#define AMAZON_DMA_CH0_DES_LEN AMAZON_DMA+0x94
+#define AMAZON_DMA_CH1_DES_LEN AMAZON_DMA+0x98
+#define AMAZON_DMA_CH2_DES_LEN AMAZON_DMA+0x9c
+#define AMAZON_DMA_CH3_DES_LEN AMAZON_DMA+0xa0
+#define AMAZON_DMA_CH4_DES_LEN AMAZON_DMA+0xa4
+#define AMAZON_DMA_CH5_DES_LEN AMAZON_DMA+0xa8
+#define AMAZON_DMA_CH6_DES_LEN AMAZON_DMA+0xac
+#define AMAZON_DMA_CH7_DES_LEN AMAZON_DMA+0xb0
+#define AMAZON_DMA_CH8_DES_LEN AMAZON_DMA+0xb4
+#define AMAZON_DMA_CH9_DES_LEN AMAZON_DMA+0xb8
+#define AMAZON_DMA_CH10_DES_LEN AMAZON_DMA+0xbc
+#define AMAZON_DMA_CH11_DES_LEN AMAZON_DMA+0xc0
+#define AMAZON_DMA_CH1_DES_OFST AMAZON_DMA+0xc4
+#define AMAZON_DMA_CH2_DES_OFST AMAZON_DMA+0xc8
+#define AMAZON_DMA_CH3_DES_OFST AMAZON_DMA+0xcc
+#define AMAZON_DMA_CH4_DES_OFST AMAZON_DMA+0xd0
+#define AMAZON_DMA_CH5_DES_OFST AMAZON_DMA+0xd4
+#define AMAZON_DMA_CH6_DES_OFST AMAZON_DMA+0xd8
+#define AMAZON_DMA_CH7_DES_OFST AMAZON_DMA+0xdc
+#define AMAZON_DMA_CH8_DES_OFST AMAZON_DMA+0xe0
+#define AMAZON_DMA_CH9_DES_OFST AMAZON_DMA+0xe4
+#define AMAZON_DMA_CH10_DES_OFST AMAZON_DMA+0xe8
+#define AMAZON_DMA_CH11_DES_OFST AMAZON_DMA+0xec
+#define AMAZON_DMA_SW_BL AMAZON_DMA+0xf0
+#define AMAZON_DMA_TPE_BL AMAZON_DMA+0xf4
+#define AMAZON_DMA_DPlus2FPI_BL AMAZON_DMA+0xf8
+#define AMAZON_DMA_GRX_BUF_LEN AMAZON_DMA+0xfc
+#define AMAZON_DMA_DMA_ECON_REG AMAZON_DMA+0x100
+#define AMAZON_DMA_POLLING_REG AMAZON_DMA+0x104
+#define AMAZON_DMA_CH_WGT AMAZON_DMA+0x108
+#define AMAZON_DMA_TX_WGT AMAZON_DMA+0x10c
+#define AMAZON_DMA_DPLus2FPI_CLASS AMAZON_DMA+0x110
+#define AMAZON_DMA_COMB_ISR AMAZON_DMA+0x114
+
+//channel reset
+#define SWITCH1_RST_MASK 0x83 /* Switch1 channel mask */
+#define SWITCH2_RST_MASK 0x10C /* Switch1 channel mask */
+#define TPE_RST_MASK 0x630 /* TPE channel mask */
+#define DPlus2FPI_RST_MASK 0x840 /* DPlusFPI channel mask */
+
+//ISR
+#define DMA_ISR_RDERR 0x20
+#define DMA_ISR_CMDCPT 0x10
+#define DMA_ISR_CPT 0x8
+#define DMA_ISR_DURR 0x4
+#define DMA_ISR_EOP 0x2
+#define DMA_DESC_BYTEOFF_SHIFT 23
+
+#define DMA_POLLING_ENABLE 0x80000000
+#define DMA_POLLING_CNT 0x50 /*minimum 0x10, max 0xfff0*/
+
+/***********************************************************************/
+/* Module : Debug register address and bits */
+/***********************************************************************/
+
+#define AMAZON_DEBUG (KSEG1+0x1F106000)
+/***********************************************************************/
+
+
+/***MCD Break System Control Register***/
+#define AMAZON_DEBUG_MCD_BSCR ((volatile u32*)(AMAZON_DEBUG+ 0x0000))
+
+/***PMC Performance Counter Control Register0***/
+#define AMAZON_DEBUG_PMC_PCCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0010))
+
+/***PMC Performance Counter Control Register1***/
+#define AMAZON_DEBUG_PMC_PCCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0014))
+
+/***PMC Performance Counter Register0***/
+#define AMAZON_DEBUG_PMC_PCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0018))
+
+/*165001:henryhsu:20050603:Source modified by Bing Tao*/
+
+/***PMC Performance Counter Register1***/
+//#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0020))
+#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x001c))
+
+/*165001*/
+
+
+
+/***MCD Suspend Mode Control Register***/
+#define AMAZON_DEBUG_MCD_SMCR ((volatile u32*)(AMAZON_DEBUG+ 0x0024))
+
+/***********************************************************************/
+/* Module : GPIO register address and bits */
+/***********************************************************************/
+
+#define AMAZON_GPIO (KSEG1+0x10100B00)
+/***********************************************************************/
+
+
+/***Port 0 Data Output Register (0010H)***/
+#define AMAZON_GPIO_P0_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0010))
+
+/***Port 1 Data Output Register (0040H)***/
+#define AMAZON_GPIO_P1_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0040))
+
+/***Port 0 Data Input Register (0014H)***/
+#define AMAZON_GPIO_P0_IN ((volatile u32*)(AMAZON_GPIO+ 0x0014))
+
+/***Port 1 Data Input Register (0044H)***/
+#define AMAZON_GPIO_P1_IN ((volatile u32*)(AMAZON_GPIO+ 0x0044))
+
+/***Port 0 Direction Register (0018H)***/
+#define AMAZON_GPIO_P0_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0018))
+
+/***Port 1 Direction Register (0048H)***/
+#define AMAZON_GPIO_P1_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0048))
+
+/***Port 0 Alternate Function Select Register 0 (001C H) ***/
+#define AMAZON_GPIO_P0_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x001C))
+
+/***Port 1 Alternate Function Select Register 0 (004C H) ***/
+#define AMAZON_GPIO_P1_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x004C))
+
+/***Port 0 Alternate Function Select Register 1 (0020 H) ***/
+#define AMAZON_GPIO_P0_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0020))
+
+/***Port 1 Alternate Function Select Register 0 (0050 H) ***/
+#define AMAZON_GPIO_P1_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0050))
+
+/***Port 0 Open Drain Control Register (0024H)***/
+#define AMAZON_GPIO_P0_OD ((volatile u32*)(AMAZON_GPIO+ 0x0024))
+
+/***Port 1 Open Drain Control Register (0054H)***/
+#define AMAZON_GPIO_P1_OD ((volatile u32*)(AMAZON_GPIO+ 0x0054))
+
+/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/
+#define AMAZON_GPIO_P0_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0028))
+
+/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/
+#define AMAZON_GPIO_P1_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0058))
+
+/***Port 0 Pull Up/Pull Down Select Register (002C H)***/
+#define AMAZON_GPIO_P0_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x002C))
+
+/***Port 1 Pull Up/Pull Down Select Register (005C H)***/
+#define AMAZON_GPIO_P1_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x005C))
+
+/***Port 0 Pull Up Device Enable Register (0030 H)***/
+#define AMAZON_GPIO_P0_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0030))
+
+/***Port 1 Pull Up Device Enable Register (0060 H)***/
+#define AMAZON_GPIO_P1_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0060))
+
+/***********************************************************************/
+/* Module : BIU register address and bits */
+/***********************************************************************/
+
+#define AMAZON_BIU (KSEG1+0x1FA80000)
+/***********************************************************************/
+
+
+/***BIU Identification Register***/
+#define AMAZON_BIU_ID ((volatile u32*)(AMAZON_BIU+ 0x0000))
+#define AMAZON_BIU_ID_ARCH (1 << 16)
+#define AMAZON_BIU_ID_ID(value) (((( 1 << 8) - 1) & (value)) << 8)
+#define AMAZON_BIU_ID_REV(value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***BIU Access Error Cause Register***/
+#define AMAZON_BIU_ERRCAUSE ((volatile u32*)(AMAZON_BIU+ 0x0100))
+#define AMAZON_BIU_ERRCAUSE_ERR (1 << 31)
+#define AMAZON_BIU_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16)
+#define AMAZON_BIU_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***BIU Access Error Address Register***/
+#define AMAZON_BIU_ERRADDR ((volatile u32*)(AMAZON_BIU+ 0x0108))
+#define AMAZON_BIU_ERRADDR_ADDR
+
+/***********************************************************************/
+/* Module : ICU register address and bits */
+/***********************************************************************/
+
+#define AMAZON_ICU (KSEG1+0x1F101000)
+/***********************************************************************/
+
+/***IM0 Interrupt Status Register***/
+#define AMAZON_ICU_IM0_ISR (AMAZON_ICU + 0x0010)
+#define AMAZON_ICU_IM1_ISR (AMAZON_ICU + 0x0020)
+#define AMAZON_ICU_IM2_ISR (AMAZON_ICU + 0x0030)
+#define AMAZON_ICU_IM3_ISR (AMAZON_ICU + 0x0040)
+#define AMAZON_ICU_IM4_ISR (AMAZON_ICU + 0x0050)
+
+/***IM0 Interrupt Enable Register***/
+#define AMAZON_ICU_IM0_IER (AMAZON_ICU + 0x0014)
+#define AMAZON_ICU_IM1_IER (AMAZON_ICU + 0x0024)
+#define AMAZON_ICU_IM2_IER (AMAZON_ICU + 0x0034)
+#define AMAZON_ICU_IM3_IER (AMAZON_ICU + 0x0044)
+#define AMAZON_ICU_IM4_IER (AMAZON_ICU + 0x0054)
+
+/***IM0 Interrupt Output Status Register***/
+#define AMAZON_ICU_IM0_IOSR (AMAZON_ICU + 0x0018)
+#define AMAZON_ICU_IM1_IOSR (AMAZON_ICU + 0x0028)
+#define AMAZON_ICU_IM2_IOSR (AMAZON_ICU + 0x0038)
+#define AMAZON_ICU_IM3_IOSR (AMAZON_ICU + 0x0048)
+#define AMAZON_ICU_IM4_IOSR (AMAZON_ICU + 0x0058)
+
+/***IM0 Interrupt Request Set Register***/
+#define AMAZON_ICU_IM0_IRSR (AMAZON_ICU + 0x001c)
+#define AMAZON_ICU_IM1_IRSR (AMAZON_ICU + 0x002c)
+#define AMAZON_ICU_IM2_IRSR (AMAZON_ICU + 0x003c)
+#define AMAZON_ICU_IM3_IRSR (AMAZON_ICU + 0x004c)
+#define AMAZON_ICU_IM4_IRSR (AMAZON_ICU + 0x005c)
+
+/***Interrupt Vector Value Register***/
+#define AMAZON_ICU_IM_VEC (AMAZON_ICU + 0x0060)
+
+/***Interrupt Vector Value Mask***/
+#define AMAZON_ICU_IM0_VEC_MASK 0x0000001f
+#define AMAZON_ICU_IM1_VEC_MASK 0x000003e0
+#define AMAZON_ICU_IM2_VEC_MASK 0x00007c00
+#define AMAZON_ICU_IM3_VEC_MASK 0x000f8000
+#define AMAZON_ICU_IM4_VEC_MASK 0x01f00000
+
+/***DMA Interrupt Mask Value***/
+#define AMAZON_DMA_H_MASK 0x00000fff
+
+/***External Interrupt Control Register***/
+#define AMAZON_ICU_EXTINTCR (AMAZON_ICU + 0x0000)
+#define AMAZON_ICU_IRNICR (AMAZON_ICU + 0x0004)
+#define AMAZON_ICU_IRNCR (AMAZON_ICU + 0x0008)
+#define AMAZON_ICU_IRNEN (AMAZON_ICU + 0x000c)
+
+/***********************************************************************/
+/* Module : PCI/Card-BUS/PC-Card register address and bits */
+/***********************************************************************/
+
+#define AMAZON_PCI (KSEG1+0x10105400)
+#define AMAZON_PCI_CFG_BASE (KSEG1+0x11000000)
+#define AMAZON_PCI_MEM_BASE (KSEG1+0x12000000)
+
+#define CLOCK_CONTROL AMAZON_PCI + 0x00000000
+#define ARB_CTRL_bit 1
+#define IDENTIFICATION AMAZON_PCI + 0x00000004
+#define SOFTRESET AMAZON_PCI + 0x00000010
+#define PCI_FPI_ERROR_ADDRESS AMAZON_PCI + 0x00000014
+#define FPI_PCI_ERROR_ADDRESS AMAZON_PCI + 0x00000018
+#define FPI_ERROR_TAG AMAZON_PCI + 0x0000001c
+#define IRR AMAZON_PCI + 0x00000020
+#define IRA_IR AMAZON_PCI + 0x00000024
+#define IRM AMAZON_PCI + 0x00000028
+#define DMA_COMPLETE_BIT 0
+#define PCI_POWER_CHANGE_BIT 16
+#define PCI_MASTER0_BROKEN_INT_BIT 24
+#define PCI_MASTER1_BROKEN_INT_BIT 25
+#define PCI_MASTER2_BROKEN_INT_BIT 26
+#define EOI AMAZON_PCI + 0x0000002c
+#define PCI_MODE AMAZON_PCI + 0x00000030
+#define PCI_MODE_cfgok_bit 24
+#define DEVICE_VENDOR_ID AMAZON_PCI + 0x00000034
+#define SUBSYSTEM_VENDOR_ID AMAZON_PCI + 0x00000038
+#define POWER_MANAGEMENT AMAZON_PCI + 0x0000003c
+#define CLASS_CODE1 AMAZON_PCI + 0x00000040
+#define BAR11_MASK AMAZON_PCI + 0x00000044
+#define BAR12_MASK AMAZON_PCI + 0x00000048
+#define BAR13_MASK AMAZON_PCI + 0x0000004c
+#define BAR14_MASK AMAZON_PCI + 0x00000050
+#define BAR15_MASK AMAZON_PCI + 0x00000054
+#define BAR16_MASK AMAZON_PCI + 0x00000058
+#define CARDBUS_CIS_POINTER1 AMAZON_PCI + 0x0000005c
+#define SUBSYSTEM_ID1 AMAZON_PCI + 0x00000060
+#define PCI_ADDRESS_MAP_11 AMAZON_PCI + 0x00000064
+#define PCI_ADDRESS_MAP_12 AMAZON_PCI + 0x00000068
+#define PCI_ADDRESS_MAP_13 AMAZON_PCI + 0x0000006c
+#define PCI_ADDRESS_MAP_14 AMAZON_PCI + 0x00000070
+#define PCI_ADDRESS_MAP_15 AMAZON_PCI + 0x00000074
+#define PCI_ADDRESS_MAP_16 AMAZON_PCI + 0x00000078
+#define FPI_SEGMENT_ENABLE AMAZON_PCI + 0x0000007c
+#define CLASS_CODE2 AMAZON_PCI + 0x00000080
+#define BAR21_MASK AMAZON_PCI + 0x00000084
+#define BAR22_MASK AMAZON_PCI + 0x00000088
+#define BAR23_MASK AMAZON_PCI + 0x0000008c
+#define BAR24_MASK AMAZON_PCI + 0x00000090
+#define BAR25_MASK AMAZON_PCI + 0x00000094
+#define BAR26_MASK AMAZON_PCI + 0x00000098
+#define CARDBUS_CIS_POINTER2 AMAZON_PCI + 0x0000009c
+#define SUBSYSTEM_ID2 AMAZON_PCI + 0x000000a0
+#define PCI_ADDRESS_MAP_21 AMAZON_PCI + 0x000000a4
+#define PCI_ADDRESS_MAP_22 AMAZON_PCI + 0x000000a8
+#define PCI_ADDRESS_MAP_23 AMAZON_PCI + 0x000000ac
+#define PCI_ADDRESS_MAP_24 AMAZON_PCI + 0x000000b0
+#define PCI_ADDRESS_MAP_25 AMAZON_PCI + 0x000000b4
+#define PCI_ADDRESS_MAP_26 AMAZON_PCI + 0x000000b8
+#define FPI_ADDRESS_MASK11LOW AMAZON_PCI + 0x000000bc
+#define FPI_ADDRESS_MAP_0 AMAZON_PCI + 0x000000c0
+#define FPI_ADDRESS_MAP_1 AMAZON_PCI + 0x000000c4
+#define FPI_ADDRESS_MAP_2 AMAZON_PCI + 0x000000c8
+#define FPI_ADDRESS_MAP_3 AMAZON_PCI + 0x000000cc
+#define FPI_ADDRESS_MAP_4 AMAZON_PCI + 0x000000d0
+#define FPI_ADDRESS_MAP_5 AMAZON_PCI + 0x000000d4
+#define FPI_ADDRESS_MAP_6 AMAZON_PCI + 0x000000d8
+#define FPI_ADDRESS_MAP_7 AMAZON_PCI + 0x000000dc
+#define FPI_ADDRESS_MAP_11LOW AMAZON_PCI + 0x000000e0
+#define FPI_ADDRESS_MAP_11HIGH AMAZON_PCI + 0x000000e4
+#define FPI_BURST_LENGTH AMAZON_PCI + 0x000000e8
+#define SET_PCI_SERR AMAZON_PCI + 0x000000ec
+#define DMA_FPI_START_ADDR AMAZON_PCI + 0x000000f0
+#define DMA_PCI_START_ADDR AMAZON_PCI + 0x000000f4
+#define DMA_TRANSFER_COUNT AMAZON_PCI + 0x000000f8
+#define DMA_CONTROL_STATUS AMAZON_PCI + 0x000000fc
+
+#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x0800
+#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1000
+#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1800
+#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2000
+#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2800
+#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3000
+#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3800
+#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4000
+#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4800
+#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5000
+#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5800
+#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6000
+#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6800
+#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7000
+#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7800
+#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0XF000
+#define EXT_PCI_BAR1_ADDR 0x10
+#define EXT_PCI_BAR2_ADDR 0x14
+#define EXT_PCI_BAR3_ADDR 0x18
+#define EXT_PCI_BAR4_ADDR 0x1C
+#define EXT_PCI_BAR5_ADDR 0x20
+#define EXT_PCI_BAR6_ADDR 0x24
+
+#define DEVICE_ID_VECDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x0
+#define STATUS_COMMAND_ADDR AMAZON_PCI_CFG_BASE + 0x4
+#define BUS_MASTER_ENABLE_BIT 2
+#define MEM_SPACE_ENABLE_BIT 1
+#define CLASS_CODE_REVISION_ADDR AMAZON_PCI_CFG_BASE + 0x8
+#define BIST_HEADER_TYPE_LATENCY_CAHCE_ADDR AMAZON_PCI_CFG_BASE + 0xC
+#define BAR1_ADDR AMAZON_PCI_CFG_BASE + 0x10
+#define BAR2_ADDR AMAZON_PCI_CFG_BASE + 0x14
+#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18
+#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C
+#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18
+#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C
+#define BAR5_ADDR AMAZON_PCI_CFG_BASE + 0x20
+#define BAR6_ADDR AMAZON_PCI_CFG_BASE + 0x24
+#define CARDBUS_CIS_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x28
+#define SUBSYSTEM_ID_VENDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x2C
+#define EXPANSION_ROM_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x30
+#define CAPABILITIES_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x34
+#define RESERVED_0x38 AMAZON_PCI_CFG_BASE + 0x38
+#define MAX_LAT_MIN_GNT_INT_PIN_LINE_ADDR AMAZON_PCI_CFG_BASE + 0x3C
+#define POWER_MNGT_NEXT_POINTER_CAP_ID_ADDR AMAZON_PCI_CFG_BASE + 0x40
+#define POWER_MANAGEMENT_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x44
+#define RESERVED_0x48 AMAZON_PCI_CFG_BASE + 0x48
+#define RESERVED_0x4C AMAZON_PCI_CFG_BASE + 0x4C
+#define ERROR_ADDR_PCI_FPI_ADDR AMAZON_PCI_CFG_BASE + 0x50
+#define ERROR_ADdR_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x54
+#define ERROR_TAG_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x58
+#define PCI_ARB_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x5C
+#define INTERNAL_ARB_ENABLE_BIT 0
+#define ARB_SCHEME_BIT 1
+#define PCI_MASTER0_PRIOR_2BITS 2
+#define PCI_MASTER1_PRIOR_2BITS 4
+#define PCI_MASTER2_PRIOR_2BITS 6
+#define PCI_MASTER0_REQ_MASK_2BITS 8
+#define PCI_MASTER1_REQ_MASK_2BITS 10
+#define PCI_MASTER2_REQ_MASK_2BITS 12
+#define PCI_MASTER0_GNT_MASK_2BITS 14
+#define PCI_MASTER1_GNT_MASK_2BITS 16
+#define PCI_MASTER2_GNT_MASK_2BITS 18
+#define FPI_PCI_INT_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x60
+#define FPI_PCI_INT_ACK_ADDR AMAZON_PCI_CFG_BASE + 0x64
+#define FPI_PCI_INT_MASK_ADDR AMAZON_PCI_CFG_BASE + 0x68
+#define CARDBUS_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x6C
+#define CARDBUS_CFRAME_ENABLE 0
+
+#define CLOCK_CONTROL_default 0x00000000
+#define CLOCK_CONTROL_mask 0x00000003
+
+#define IDENTIFICATION_default 0x0011C002
+#define IDENTIFICATION_mask 0x00000000
+
+#define SOFTRESET_default 0x00000000
+// SOFTRESET bit 0 is writable but will be reset to 0 after software reset is over
+#define SOFTRESET_mask 0x00000000
+
+#define PCI_FPI_ERROR_ADDRESS_default 0xFFFFFFFF
+#define PCI_FPI_ERROR_ADDRESS_mask 0x00000000
+
+#define FPI_PCI_ERROR_ADDRESS_default 0xFFFFFFFF
+#define FPI_PCI_ERROR_ADDRESS_mask 0x00000000
+
+#define FPI_ERROR_TAG_default 0x0000000F
+#define FPI_ERROR_TAG_mask 0x00000000
+
+#define IRR_default 0x00000000
+#define IRR_mask 0x07013b2F
+
+#define IRA_IR_default 0x00000000
+#define IRA_IR_mask 0x07013b2F
+
+#define IRM_default 0x00000000
+#define IRM_mask 0xFFFFFFFF
+
+#define EOI_default 0x00000000
+#define EOI_mask 0x00000000
+
+#define PCI_MODE_default 0x01000103
+#define PCI_MODE_mask 0x1107070F
+
+#define DEVICE_VENDOR_ID_default 0x000C15D1
+#define DEVICE_VENDOR_ID_mask 0xFFFFFFFF
+
+#define SUBSYSTEM_VENDOR_ID_default 0x000015D1
+#define SUBSYSTEM_VENDOR_ID_mask 0x0000FFFF
+
+#define POWER_MANAGEMENT_default 0x0000001B
+#define POWER_MANAGEMENT_mask 0x0000001F
+
+#define CLASS_CODE1_default 0x00028000
+#define CLASS_CODE1_mask 0x00FFFFFF
+
+#define BAR11_MASK_default 0x0FF00008
+#define BAR11_MASK_mask 0x8FF00008
+
+#define BAR12_MASK_default 0x80001800
+#define BAR12_MASK_mask 0x80001F08
+
+#define BAR13_MASK_default 0x8FF00008
+#define BAR13_MASK_mask 0x8FF00008
+
+#define BAR14_MASK_default 0x8F000000
+#define BAR14_MASK_mask 0x8FFFFF08
+
+#define BAR15_MASK_default 0x80000000
+#define BAR15_MASK_mask 0x8FFFFF08
+
+#define BAR16_MASK_default 0x80000001
+// bit 0 and bit 3 is mutually exclusive
+#define BAR16_MASK_mask 0x8FFFFFF9
+
+#define CARDBUS_CIS_POINTER1_default 0x00000000
+#define CARDBUS_CIS_POINTER1_mask 0x03FFFFFF
+
+#define SUBSYSTEM_ID1_default 0x0000000C
+#define SUBSYSTEM_ID1_mask 0x0000FFFF
+
+#define PCI_ADDRESS_MAP_11_default 0x18000000
+#define PCI_ADDRESS_MAP_11_mask 0x7FFFFFF1
+
+#define PCI_ADDRESS_MAP_12_default 0x18100000
+#define PCI_ADDRESS_MAP_12_mask 0x7FFFFF01
+
+#define PCI_ADDRESS_MAP_13_default 0x18200000
+#define PCI_ADDRESS_MAP_13_mask 0x7FF00001
+
+#define PCI_ADDRESS_MAP_14_default 0x70000000
+#define PCI_ADDRESS_MAP_14_mask 0x7FFFFF01
+
+#define PCI_ADDRESS_MAP_15_default 0x00000001
+#define PCI_ADDRESS_MAP_15_mask 0x7FFFFF01
+
+#define PCI_ADDRESS_MAP_16_default 0x60000000
+#define PCI_ADDRESS_MAP_16_mask 0x7FF00001
+
+#define FPI_SEGMENT_ENABLE_default 0x000003FF
+#define FPI_SEGMENT_ENABLE_mask 0x000003FF
+
+#define CLASS_CODE2_default 0x00FF0000
+#define CLASS_CODE2_mask 0x00FFFFFF
+
+#define BAR21_MASK_default 0x80000008
+#define BAR21_MASK_mask 0x8FFFFFF8
+
+#define BAR22_MASK_default 0x80000008
+#define BAR22_MASK_mask 0x80001F08
+
+#define BAR23_MASK_default 0x80000008
+#define BAR23_MASK_mask 0x8FF00008
+
+#define BAR24_MASK_default 0x8FE00000
+#define BAR24_MASK_mask 0x8FFFFF08
+
+#define BAR25_MASK_default 0x8FFFF000
+#define BAR25_MASK_mask 0x8FFFFF08
+
+#define BAR26_MASK_default 0x8FFFFFE1
+#define BAR26_MASK_mask 0x8FFFFFF1
+
+#define CARDBUS_CIS_POINTER2_default 0x00000000
+#define CARDBUS_CIS_POINTER2_mask 0x03FFFFFF
+
+#define SUBSYSTEM_ID2_default 0x0000000C
+#define SUBSYSTEM_ID2_mask 0x0000FFFF
+
+#define PCI_ADDRESS_MAP_21_default 0x3FE00000
+#define PCI_ADDRESS_MAP_21_mask 0x7FFFFFF1
+
+#define PCI_ADDRESS_MAP_22_default 0x68000000
+#define PCI_ADDRESS_MAP_22_mask 0x7FFFFF01
+
+#define PCI_ADDRESS_MAP_23_default 0x20000000
+#define PCI_ADDRESS_MAP_23_mask 0x7FF00001
+
+#define PCI_ADDRESS_MAP_24_default 0x70000001
+#define PCI_ADDRESS_MAP_24_mask 0x7FFFFF01
+
+#define PCI_ADDRESS_MAP_25_default 0x78000001
+#define PCI_ADDRESS_MAP_25_mask 0x7FFFFF01
+
+#define PCI_ADDRESS_MAP_26_default 0x20000000
+#define PCI_ADDRESS_MAP_26_mask 0x7FF00001
+
+#define FPI_ADDRESS_MASK11LOW_default 0x00000000
+#define FPI_ADDRESS_MASK11LOW_mask 0x00070000
+
+#define FPI_ADDRESS_MAP_0_default 0x00000000
+#define FPI_ADDRESS_MAP_0_mask 0xFFF00000
+
+#define FPI_ADDRESS_MAP_1_default 0x10000000
+#define FPI_ADDRESS_MAP_1_mask 0xFFF00000
+
+#define FPI_ADDRESS_MAP_2_default 0x20000000
+#define FPI_ADDRESS_MAP_2_mask 0xFFF00000
+
+#define FPI_ADDRESS_MAP_3_default 0x30000000
+#define FPI_ADDRESS_MAP_3_mask 0xFFF00000
+
+#define FPI_ADDRESS_MAP_4_default 0x40000000
+#define FPI_ADDRESS_MAP_4_mask 0xFFF00000
+
+#define FPI_ADDRESS_MAP_5_default 0x50000000
+#define FPI_ADDRESS_MAP_5_mask 0xFFF00000
+
+#define FPI_ADDRESS_MAP_6_default 0x60000000
+#define FPI_ADDRESS_MAP_6_mask 0xFFF00000
+
+#define FPI_ADDRESS_MAP_7_default 0x70000000
+#define FPI_ADDRESS_MAP_7_mask 0xFFF00000
+
+#define FPI_ADDRESS_MAP_11LOW_default 0xB0000000
+#define FPI_ADDRESS_MAP_11LOW_mask 0xFFFF0000
+
+#define FPI_ADDRESS_MAP_11HIGH_default 0xB8000000
+#define FPI_ADDRESS_MAP_11HIGH_mask 0xFFF80000
+
+#define FPI_BURST_LENGTH_default 0x00000000
+#define FPI_BURST_LENGTH_mask 0x00000303
+
+#define SET_PCI_SERR_default 0x00000000
+#define SET_PCI_SERR_mask 0x00000000
+
+#define DMA_FPI_START_ADDRESS_default 0x00000000
+#define DMA_FPI_START_ADDRESS_mask 0xFFFFFFFF
+
+#define DMA_PCI_START_ADDRESS_default 0x00000000
+#define DMA_PCI_START_ADDRESS_mask 0xFFFFFFFF
+
+#define DMA_TRANSFER_COUNT_default 0x00000000
+#define DMA_TRANSFER_COUNT_mask 0x0000FFFF
+
+#define DMA_CONTROL_STATUS_default 0x00000000
+#define DMA_CONTROL_STATUS_mask 0x00000000 // bit 0,1 is writable
+
+/***********************************************************************/
+#undef IKOS_MINI_BOOT //don't run a full booting
+#ifdef CONFIG_USE_IKOS
+#define CONFIG_USE_VENUS //Faster, 10M CPU and 192k baudrate
+#ifdef CONFIG_USE_VENUS
+#define IKOS_CPU_SPEED 10000000
+#else
+#define IKOS_CPU_SPEED 180000 //IKOS is slow
+#endif
+#endif //CONFIG_USE_IKOS
+
+/* 165001:henryhsu:20050603:Source Modify form Bing Tao */
+
+#if defined(CONFIG_NET_WIRELESS_SPURS) || defined(CONFIG_NET_WIRELESS_SPURS_MODULE)
+#define EBU_PCI_SOFTWARE_ARBITOR
+#endif
+
+#define AMAZON_B11
+#ifdef AMAZON_B11
+#define SWITCH_BUF_FPI_ADDR (0x10110000)
+#define SWITCH_BUF_ADDR (KSEG1+SWITCH_BUF_FPI_ADDR)
+#define SWITCH_BUF_SIZE (0x2800)
+#define AMAZON_B11_CBM_QD_ADDR (SWITCH_BUF_ADDR+0x0)
+#define AMAZON_B11_BOND_CELL_ADDR (SWITCH_BUF_ADDR+0x000)
+#endif
+#define AMAZON_REFERENCE_BOARD
+//for AMAZON ATM bonding application
+#ifdef AMAZON_REFERENCE_BOARD
+#define GPIO_DETECT_LOW
+#else
+#undef GPIO_DETECT_LOW
+#endif
+
+/* 165001 */
+
+#undef AMAZON_IKOS_DEBUG_MSG
+#undef AMAZON_INT_DEBUG_MSG
+#undef AMAZON_ATM_DEBUG_MSG
+#undef AMAZON_DMA_DEBUG_MSG
+#undef AMAZON_SW_DEBUG_MSG
+#undef AMAZON_WDT_DEBUG_MSG
+#undef AMAZON_MTD_DEBUG_MSG
+#undef AMAZON_SSC_DEBUG_MSG
+#undef AMAZON_MEI_DEBUG_MSG
+
+#ifdef AMAZON_IKOS_DEBUG_MSG
+#define AMAZON_IKOS_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args)
+#else
+#define AMAZON_IKOS_DMSG(fmt,args...)
+#endif
+
+#ifdef AMAZON_WDT_DEBUG_MSG
+#define AMAZON_WDT_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
+#else
+#define AMAZON_WDT_DMSG(fm,args...)
+#endif
+
+#ifdef AMAZON_SSC_DEBUG_MSG
+#define AMAZON_SSC_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
+#else
+#define AMAZON_SSC_DMSG(fm,args...)
+#endif
+
+#ifdef AMAZON_DMA_DEBUG_MSG
+#define AMAZON_DMA_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
+#else
+#define AMAZON_DMA_DMSG(fm,args...)
+#endif
+
+#ifdef AMAZON_ATM_DEBUG_MSG
+#define AMAZON_TPE_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
+#else //not AMAZON_ATM_DEBUG
+#define AMAZON_TPE_DMSG(fmt, args...)
+#endif //AMAZON_ATM_DEBUG
+
+#ifdef AMAZON_SW_DEBUG_MSG
+#define AMAZON_SW_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args)
+#else
+#define AMAZON_SW_DMSG(fmt,args...)
+#endif
+
+#ifdef AMAZON_MTD_DEBUG_MSG
+#define AMAZON_MTD_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args)
+#else
+#define AMAZON_MTD_DMSG(fmt,args...)
+#endif
+
+#ifdef AMAZON_INT_DEBUG_MSG
+#define AMAZON_INT_DMSG(x...) printk(x)
+#else
+#define AMAZON_INT_DMSG(x...)
+#endif
+
+#ifdef AMAZON_MEI_DEBUG_MSG
+#define AMAZON_MEI_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args)
+#else
+#define AMAZON_MEI_DMSG(fmt,args...)
+#endif
+
+#endif //AMAZON_H
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h
new file mode 100644
index 0000000..63ab592
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h
@@ -0,0 +1,148 @@
+#ifndef AMAZON_DMA_H
+#define AMAZON_DMA_H
+
+#define RCV_INT 1
+#define TX_BUF_FULL_INT 2
+#define TRANSMIT_CPT_INT 4
+
+#define QOS_DEFAULT_WGT 0x7fffffffUL;
+
+
+enum attr_t{
+ TX=0,
+ RX=1,
+ RESERVED=2,
+ DEFAULT=3,
+
+};
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+typedef struct rx_desc{
+ u32 data_length:16;
+ volatile u32 reserved:7;
+ volatile u32 byte_offset:2;
+ volatile u32 Burst_length_offset:3;
+ volatile u32 EoP:1;
+ volatile u32 Res:1;
+ volatile u32 C:1;
+ volatile u32 OWN:1;
+ volatile u32 Data_Pointer;
+ /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/
+}_rx_desc;
+
+
+typedef struct tx_desc{
+ volatile u32 data_length:16;
+ volatile u32 reserved1:7;
+ volatile u32 byte_offset:5;
+ volatile u32 EoP:1;
+ volatile u32 SoP:1;
+ volatile u32 C:1;
+ volatile u32 OWN:1;
+ volatile u32 Data_Pointer;//fix me:should be 28 bits here
+}_tx_desc;
+#else //BIG
+typedef struct rx_desc{
+ union
+ {
+ struct
+ {
+ volatile u32 OWN :1;
+ volatile u32 C :1;
+ volatile u32 SoP :1;
+ volatile u32 EoP :1;
+ volatile u32 Burst_length_offset :3;
+ volatile u32 byte_offset :2;
+ volatile u32 reserve :7;
+ volatile u32 data_length :16;
+ }field;
+
+ volatile u32 word;
+ }status;
+
+ volatile u32 Data_Pointer;
+}_rx_desc;
+
+
+typedef struct tx_desc{
+ union
+ {
+ struct
+ {
+ volatile u32 OWN :1;
+ volatile u32 C :1;
+ volatile u32 SoP :1;
+ volatile u32 EoP :1;
+ volatile u32 byte_offset :5;
+ volatile u32 reserved :7;
+ volatile u32 data_length :16;
+ }field;
+
+ volatile u32 word;
+ }status;
+
+ volatile u32 Data_Pointer;
+}_tx_desc;
+
+#endif //ENDIAN
+
+struct dma_channel_info{
+ /*filled by driver, optional*/
+ enum attr_t attr;/*TX or RX*/
+ int weight;
+ int desc_num;
+ int packet_size;
+ int control;/*on or off*/
+
+ int desc_base;
+ int status;
+};
+
+typedef struct dma_channel_info _dma_channel_info;
+
+struct dma_device_info{
+ /*variables*/
+ /*filled by driver, compulsary*/
+ char device_name[15];
+ enum attr_t attr;/*default or else*/
+ int tx_burst_len;
+ int rx_burst_len;
+
+ int logic_rx_chan_base;
+ int logic_tx_chan_base;
+ u8 on_ch_bit;
+ /*filled by driver, optional*/
+ int weight;
+ int current_tx_chan;
+ int current_rx_chan;
+ int num_tx_chan;
+ int num_rx_chan;
+ struct dma_channel_info tx_chan[2];
+ struct dma_channel_info rx_chan[4];
+
+ /*functions, optional*/
+ u8* (*buffer_alloc)(int len,int* offset, void** opt);
+ int (*buffer_free)(u8* dataptr, void* opt);
+ int (*intr_handler)(struct dma_device_info* info, int status);
+ /*set by device, clear by dma*/
+ int ack;
+ void * priv; /* used by peripheral driver only */
+};
+typedef struct dma_device_info _dma_device_info;
+
+int dma_device_register(struct dma_device_info* info);
+
+int dma_device_unregister(struct dma_device_info* info);
+
+int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt);
+
+int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt);
+
+int dma_device_update(struct dma_device_info* info);
+
+void dma_device_update_rx(struct dma_device_info* dma_dev);
+
+void dma_device_update_tx(struct dma_device_info* dma_dev);
+
+void register_handler_sim(int (*handler)(int));
+#endif /* AMAZON_DMA_H */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h
new file mode 100644
index 0000000..6ac8ab3
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h
@@ -0,0 +1,220 @@
+#ifndef _AMAZON_MEI_H
+#define _AMAZON_MEI_H
+/////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#include "amazon_mei_app.h"
+
+#define AMAZON_MEI_DEBUG_ON
+#define AMAZON_MEI_CMV_EXTRA
+
+#define AMAZON_MEI_MAJOR 106
+
+/*
+** Define where in ME Processor's memory map the Stratify chip lives
+*/
+#define MEI_SPACE_ACCESS 0xB0100C00
+
+#define MAXSWAPSIZE 8 * 1024 //8k *(32bits)
+//#define AMAZON_ADSL_IMAGESIZE 16*1024 // 16k * (32bits)
+
+
+// Mailboxes
+#define MSG_LENGTH 16 // x16 bits
+#define YES_REPLY 1
+#define NO_REPLY 0
+
+#define CMV_TIMEOUT 100 //jiffies
+#define MIB_INTERVAL 10000 //msec
+
+/*** Bit definitions ***/
+
+#define FALSE 0
+#define TRUE 1
+#define BIT0 1<<0
+#define BIT1 1<<1
+#define BIT2 1<<2
+#define BIT3 1<<3
+#define BIT4 1<<4
+#define BIT5 1<<5
+#define BIT6 1<<6
+#define BIT7 1<<7
+#define BIT8 1<<8
+#define BIT9 1<<9
+#define BIT10 1<<10
+#define BIT11 1<<11
+#define BIT12 1<<12
+#define BIT13 1<<13
+#define BIT14 1<<14
+#define BIT15 1<<15
+#define BIT16 1<<16
+#define BIT17 1<<17
+#define BIT18 1<<18
+#define BIT19 1<<19
+#define BIT20 1<<20
+#define BIT21 1<<21
+#define BIT22 1<<22
+#define BIT23 1<<23
+#define BIT24 1<<24
+#define BIT25 1<<25
+#define BIT26 1<<26
+#define BIT27 1<<27
+#define BIT28 1<<28
+#define BIT29 1<<29
+#define BIT30 1<<30
+#define BIT31 1<<31
+
+
+/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/
+#define MEI_DATA_XFR (0x0000 + MEI_SPACE_ACCESS)
+#define MEI_VERSION (0x0200 + MEI_SPACE_ACCESS)
+#define ARC_GP_STAT (0x0204 + MEI_SPACE_ACCESS)
+#define MEI_XFR_ADDR (0x020C + MEI_SPACE_ACCESS)
+#define MEI_TO_ARC_INT (0x021C + MEI_SPACE_ACCESS)
+#define ARC_TO_MEI_INT (0x0220 + MEI_SPACE_ACCESS)
+#define ARC_TO_MEI_INT_MASK (0x0224 + MEI_SPACE_ACCESS)
+#define MEI_DEBUG_WAD (0x0228 + MEI_SPACE_ACCESS)
+#define MEI_DEBUG_RAD (0x022C + MEI_SPACE_ACCESS)
+#define MEI_DEBUG_DATA (0x0230 + MEI_SPACE_ACCESS)
+#define MEI_DEBUG_DEC (0x0234 + MEI_SPACE_ACCESS)
+#define MEI_CONTROL (0x0238 + MEI_SPACE_ACCESS)
+#define AT_CELLRDY_BC0 (0x023C + MEI_SPACE_ACCESS)
+#define AT_CELLRDY_BC1 (0x0240 + MEI_SPACE_ACCESS)
+#define AR_CELLRDY_BC0 (0x0244 + MEI_SPACE_ACCESS)
+#define AR_CELLRDY_BC1 (0x0248 + MEI_SPACE_ACCESS)
+#define AAI_ACCESS (0x024C + MEI_SPACE_ACCESS)
+#define AAITXCB0 (0x0300 + MEI_SPACE_ACCESS)
+#define AAITXCB1 (0x0304 + MEI_SPACE_ACCESS)
+#define AAIRXCB0 (0x0308 + MEI_SPACE_ACCESS)
+#define AAIRXCB1 (0x030C + MEI_SPACE_ACCESS)
+
+
+// MEI_TO_ARC_INTERRUPT Register definitions
+#define MEI_TO_ARC_INT1 BIT3
+#define MEI_TO_ARC_INT0 BIT2
+#define MEI_TO_ARC_CS_DONE BIT1
+#define MEI_TO_ARC_MSGAV BIT0
+
+// ARC_TO_MEI_INTERRUPT Register definitions
+#define ARC_TO_MEI_INT1 BIT8
+#define ARC_TO_MEI_INT0 BIT7
+#define ARC_TO_MEI_CS_REQ BIT6
+#define ARC_TO_MEI_DBG_DONE BIT5
+#define ARC_TO_MEI_MSGACK BIT4
+#define ARC_TO_MEI_NO_ACCESS BIT3
+#define ARC_TO_MEI_CHECK_AAITX BIT2
+#define ARC_TO_MEI_CHECK_AAIRX BIT1
+#define ARC_TO_MEI_MSGAV BIT0
+
+// ARC_TO_MEI_INTERRUPT_MASK Register definitions
+#define GP_INT1_EN BIT8
+#define GP_INT0_EN BIT7
+#define CS_REQ_EN BIT6
+#define DBG_DONE_EN BIT5
+#define MSGACK_EN BIT4
+#define NO_ACC_EN BIT3
+#define AAITX_EN BIT2
+#define AAIRX_EN BIT1
+#define MSGAV_EN BIT0
+
+// MEI_CONTROL Register definitions
+#define INT_LEVEL BIT2
+#define SOFT_RESET BIT1
+#define HOST_MSTR BIT0
+
+// MEI_DEBUG_DECODE Register definitions
+#define MEI_DEBUG_DEC_MASK (0x3)
+#define MEI_DEBUG_DEC_AUX_MASK (0x0)
+#define MEI_DEBUG_DEC_DMP1_MASK (0x1)
+#define MEI_DEBUG_DEC_DMP2_MASK (0x2)
+#define MEI_DEBUG_DEC_CORE_MASK (0x3)
+
+
+// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
+// page swap requests.
+#define MEI_TO_ARC_MAILBOX (0x15FC0)
+#define MEI_TO_ARC_MAILBOXR (0x15FEC)
+#define ARC_TO_MEI_MAILBOX (0x15F90)
+#define ARC_MEI_MAILBOXR (0x15FBC)
+
+// Codeswap request messages are indicated by setting BIT31
+#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000)
+
+/*
+** Swap page header
+*/
+// Page must be loaded at boot time if size field has BIT31 set
+#define BOOT_FLAG (BIT31)
+#define BOOT_FLAG_MASK ~BOOT_FLAG
+
+// Swap page header describes size in 32-bit words, load location, and image offset
+// for program and/or data segments
+typedef struct _arc_swp_page_hdr
+{
+ u32 p_offset; // Offset bytes of progseg from beginning of image
+ u32 p_dest; // Destination addr of progseg on processor
+ u32 p_size; // Size in 32-bitwords of program segment
+ u32 d_offset; // Offset bytes of dataseg from beginning of image
+ u32 d_dest; // Destination addr of dataseg on processor
+ u32 d_size; // Size in 32-bitwords of data segment
+}ARC_SWP_PAGE_HDR;
+
+
+/*
+** Swap image header
+*/
+#define GET_PROG 0 // Flag used for program mem segment
+#define GET_DATA 1 // Flag used for data mem segment
+
+// Image header contains size of image, checksum for image, and count of
+// page headers. Following that are 'count' page headers followed by
+// the code and/or data segments to be loaded
+typedef struct _arc_img_hdr
+{
+ u32 size; // Size of binary image in bytes
+ u32 checksum; // Checksum for image
+ u32 count; // Count of swp pages in image
+ ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy
+}ARC_IMG_HDR;
+
+
+
+/*
+** Native size for the Stratiphy interface is 32-bits. All reads and writes
+** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or
+** byte data. Read routines are provided. Write routines are probably a bad idea, as the
+** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle
+** could very well have unintended results.
+*/
+MEI_ERROR meiCMV(u16 *, int); // first arg is CMV to ARC, second to indicate whether need reply
+
+void meiLongwordWrite(u32 ul_address, u32 ul_data);
+void meiLongwordRead(u32 ul_address, u32 *pul_data);
+
+
+MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
+MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
+
+MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize);
+MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize);
+
+void meiPollForDbgDone(void);
+
+void meiMailboxInterruptsDisable(void);
+void meiMailboxInterruptsEnable(void);
+
+MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize);
+MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize);
+
+int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest);
+
+MEI_ERROR meiHaltArc(void);
+MEI_ERROR meiRunArc(void);
+
+MEI_ERROR meiDownloadBootCode(void);
+
+MEI_ERROR meiForceRebootAdslModem(void);
+
+void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data);
+
+#endif
+
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h
new file mode 100644
index 0000000..89700d9
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h
@@ -0,0 +1,54 @@
+//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl
+
+#ifndef _AMAZON_MEI_APP_H
+#define _AMAZON_MEI_APP_H
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+
+ // ioctl control
+#define AMAZON_MEI_START 300
+#define AMAZON_MEI_REPLY 301
+#define AMAZON_MEI_NOREPLY 302
+
+#define AMAZON_MEI_RESET 303
+#define AMAZON_MEI_REBOOT 304
+#define AMAZON_MEI_HALT 305
+#define AMAZON_MEI_CMV_WINHOST 306
+#define AMAZON_MEI_CMV_READ 307
+#define AMAZON_MEI_CMV_WRITE 308
+#define AMAZON_MEI_MIB_DAEMON 309
+#define AMAZON_MEI_SHOWTIME 310
+#define AMAZON_MEI_REMOTE 311
+#define AMAZON_MEI_READDEBUG 312
+#define AMAZON_MEI_WRITEDEBUG 313
+#define AMAZON_MEI_LOP 314
+
+#define AMAZON_MEI_PCM_SETUP 315
+#define AMAZON_MEI_PCM_START_TIMER 316
+#define AMAZON_MEI_PCM_STOP_TIMER 317
+#define AMAZON_MEI_PCM_CHECK 318
+#define AMAZON_MEI_GET_EOC_LEN 319
+#define AMAZON_MEI_GET_EOC_DATA 320
+#define AMAZON_MEI_PCM_GETDATA 321
+#define AMAZON_MEI_PCM_GPIO 322
+#define AMAZON_MEI_EOC_SEND 323
+//MIB
+#define AMAZON_MIB_LO_ATUC 324
+#define AMAZON_MIB_LO_ATUR 325
+#define AMAZON_MEI_DOWNLOAD 326
+
+#define AMAZON_MEI_DEBUG_MODE 327 //509221:tc.chen
+#define LOOP_DIAGNOSTIC_MODE_COMPLETE 328
+
+
+/*** Enums ***/
+typedef enum mei_error
+{
+ MEI_SUCCESS = 0,
+ MEI_FAILURE = -1,
+ MEI_MAILBOX_FULL = -2,
+ MEI_MAILBOX_EMPTY = -3,
+ MEI_MAILBOX_TIMEOUT = -4,
+}MEI_ERROR;
+
+#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h
new file mode 100644
index 0000000..d98f60b
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h
@@ -0,0 +1,1169 @@
+// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics
+
+#ifndef __AMAZON_MEI_APP_IOCTL_H
+#define __AMAZON_MEI_APP_IOCTL_H
+
+#ifdef __KERNEL__
+#include "amazon_mei_ioctl.h"
+#endif
+
+/* Interface Name */
+//#define INTERFACE_NAME <define the interface>
+
+/* adslLineTable constants */
+#define GET_ADSL_LINE_CODE 1
+
+/* adslAtucPhysTable constants */
+#define GET_ADSL_ATUC_PHY 4
+
+/* adslAturPhysTable constants */
+#define GET_ADSL_ATUR_PHY 10
+
+/* adslAtucChanTable constants */
+#define GET_ADSL_ATUC_CHAN_INFO 15
+
+/* adslAturChanTable constants */
+#define GET_ADSL_ATUR_CHAN_INFO 18
+
+/* adslAtucPerfDataTable constants */
+#define GET_ADSL_ATUC_PERF_DATA 21
+
+/* adslAturPerfDataTable constants */
+#define GET_ADSL_ATUR_PERF_DATA 40
+
+/* adslAtucIntervalTable constants */
+#define GET_ADSL_ATUC_INTVL_INFO 60
+
+/* adslAturIntervalTable constants */
+#define GET_ADSL_ATUR_INTVL_INFO 65
+
+/* adslAtucChanPerfDataTable constants */
+#define GET_ADSL_ATUC_CHAN_PERF_DATA 70
+
+/* adslAturChanPerfDataTable constants */
+#define GET_ADSL_ATUR_CHAN_PERF_DATA 90
+
+/* adslAtucChanIntervalTable constants */
+#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110
+
+/* adslAturChanIntervalTable constants */
+#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115
+
+/* adslLineAlarmConfProfileTable constants */
+#define GET_ADSL_ALRM_CONF_PROF 120
+#define SET_ADSL_ALRM_CONF_PROF 121
+
+/* adslAturTrap constants */
+#define ADSL_ATUR_TRAPS 135
+
+////////////////// RFC-3440 //////////////
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+/* adslLineExtTable */
+#define GET_ADSL_ATUC_LINE_EXT 201
+#define SET_ADSL_ATUC_LINE_EXT 203
+
+/* adslAtucPerfDateExtTable */
+#define GET_ADSL_ATUC_PERF_DATA_EXT 205
+
+/* adslAtucIntervalExtTable */
+#define GET_ADSL_ATUC_INTVL_EXT_INFO 221
+
+/* adslAturPerfDataExtTable */
+#define GET_ADSL_ATUR_PERF_DATA_EXT 225
+
+/* adslAturIntervalExtTable */
+#define GET_ADSL_ATUR_INTVL_EXT_INFO 233
+
+/* adslAlarmConfProfileExtTable */
+#define GET_ADSL_ALRM_CONF_PROF_EXT 235
+#define SET_ADSL_ALRM_CONF_PROF_EXT 236
+
+/* adslAturExtTrap */
+#define ADSL_ATUR_EXT_TRAPS 240
+
+#endif
+
+// 603221:tc.chen start
+/* The following constants are added to support the WEB related ADSL Statistics */
+
+/* adslLineStatus constants */
+#define GET_ADSL_LINE_STATUS 245
+
+/* adslLineRate constants */
+#define GET_ADSL_LINE_RATE 250
+
+/* adslLineInformation constants */
+#define GET_ADSL_LINE_INFO 255
+
+/* adslNearEndPerformanceStats constants */
+#define GET_ADSL_NEAREND_STATS 270
+
+/* adslFarEndPerformanceStats constants */
+#define GET_ADSL_FAREND_STATS 290
+
+// 603221:tc.chen end
+
+/* Loop diagnostics mode of the ADSL line related constants */
+#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 295
+#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 296
+#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 299
+
+/* Sub-carrier related parameters */
+#define GET_ADSL_ATUC_SUBCARRIER_STATS 297
+#define GET_ADSL_ATUR_SUBCARRIER_STATS 298
+#define GET_ADSL_LINE_INIT_STATS 150
+#define GET_ADSL_POWER_SPECTRAL_DENSITY 151
+
+
+///////////////////////////////////////////////////////////
+// makeCMV(Opcode, Group, Address, Index, Size, Data)
+
+/* adslLineCode Flags */
+#define LINE_CODE_FLAG 0x1 /* BIT 0th position */
+
+/* adslAtucPhysTable Flags */
+#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */
+#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data)
+#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data)
+
+#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */
+#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data)
+
+#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */
+#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data)
+
+#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */
+
+#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */
+#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data)
+
+#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */
+#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data)
+
+
+/* adslAturPhysTable Flags */
+#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */
+#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data)
+#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data)
+
+#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */
+#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data)
+
+#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */
+#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data)
+
+#define ATUR_SNRMGN_FLAG 0x8
+#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data)
+
+#define ATUR_ATTN_FLAG 0x10
+#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data)
+
+#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */
+
+#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */
+#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data)
+
+#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */
+#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data)
+
+/* adslAtucChanTable Flags */
+#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */
+#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data)
+
+#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */
+#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data)
+
+#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */
+
+/* adslAturChanTable Flags */
+#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */
+#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data)
+
+#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */
+#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data)
+
+#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */
+
+#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */
+
+/* adslAtucPerfDataTable Flags */
+#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */
+#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */
+#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data)
+#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */
+#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data)
+#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */
+#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */
+#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */
+#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */
+#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */
+#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */
+#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */
+#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */
+#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */
+#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */
+#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */
+#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */
+#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */
+#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */
+#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */
+
+/* adslAturPerfDataTable Flags */
+#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */
+#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */
+#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */
+#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data)
+#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */
+#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data)
+#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */
+#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */
+#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */
+#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */
+#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */
+#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */
+#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */
+#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */
+#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */
+#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */
+#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */
+#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */
+#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */
+#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */
+
+/* adslAtucIntervalTable Flags */
+#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */
+#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */
+#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */
+#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */
+#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */
+
+/* adslAturIntervalTable Flags */
+#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */
+#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */
+#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */
+#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */
+#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */
+
+/* adslAtucChanPerfDataTable Flags */
+#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */
+#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */
+#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */
+#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
+#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
+#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
+#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */
+#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
+#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
+#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
+#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/
+#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
+#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
+#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
+#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
+#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
+#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */
+#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
+#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
+
+
+/* adslAturChanPerfDataTable Flags */
+#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */
+#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
+#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
+#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */
+#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
+#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
+#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */
+#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data)
+#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data)
+#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
+#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data)
+#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data)
+#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
+#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
+#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */
+#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
+#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
+#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
+#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
+#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
+#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
+#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
+#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
+#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */
+#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
+#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
+
+/* adslAtucChanIntervalTable Flags */
+#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */
+#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */
+#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */
+#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */
+#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */
+#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */
+
+/* adslAturChanIntervalTable Flags */
+#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */
+#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */
+#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */
+#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */
+#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */
+#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */
+
+/* adslLineAlarmConfProfileTable Flags */
+#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */
+#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */
+#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */
+#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */
+#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */
+#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */
+#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */
+#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */
+#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */
+#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */
+#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */
+#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */
+#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */
+#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */
+#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */
+#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */
+#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */
+
+
+/* adslAturTraps Flags */
+#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */
+#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */
+#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */
+#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */
+#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */
+#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */
+#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */
+#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */
+#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */
+
+//RFC- 3440 FLAG DEFINITIONS
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+/* adslLineExtTable flags */
+#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */
+#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data)
+#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */
+#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data)
+#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data)
+#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */
+#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data)
+#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */
+#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data)
+
+/* adslAtucPerfDataExtTable flags */
+#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */
+#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
+#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */
+#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
+#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */
+#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data)
+#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */
+#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data)
+#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */
+#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */
+#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */
+#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */
+#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */
+#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */
+#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */
+#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */
+#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */
+#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */
+#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */
+#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */
+
+/* adslAturPerfDataExtTable */
+#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */
+#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data)
+#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */
+#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data)
+#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */
+#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */
+#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */
+#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */
+#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */
+#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */
+
+/* adslAutcIntervalExtTable flags */
+#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */
+#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */
+#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */
+#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */
+
+/* adslAturIntervalExtTable */
+#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */
+#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */
+
+/* adslAlarmConfProfileExtTable */
+#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */
+#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */
+#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */
+#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */
+#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */
+
+/* adslAturExtTraps */
+#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */
+#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */
+#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */
+#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */
+#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */
+
+// 603221:tc.chen start
+/* adslLineStatus Flags */
+#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */
+#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
+#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */
+#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data)
+#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */
+#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data)
+#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */
+#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data)
+
+/* adslLineRate Flags */
+#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data)
+
+
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data)
+
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data)
+
+#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data)
+
+
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data)
+
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data)
+
+#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */
+#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data)
+
+#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */
+#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data)
+
+/* adslLineInformation Flags */
+#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */
+#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data)
+#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data)
+#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */
+#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data)
+#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data)
+#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */
+#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data)
+#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */
+#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data)
+#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */
+#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data)
+#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */
+#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data)
+#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */
+#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data)
+#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data)
+#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data)
+#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */
+#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data)
+#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */
+#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data)
+#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */
+#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data)
+
+/* adslNearEndPerformanceStats Flags */
+#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
+#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
+#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */
+#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data)
+#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */
+#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */
+#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */
+#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */
+#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */
+#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */
+#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data)
+#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data)
+#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data)
+#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data)
+#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */
+#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data)
+#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */
+#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data)
+#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */
+#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data)
+#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */
+#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data)
+#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */
+#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data)
+#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */
+#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data)
+#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data)
+#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */
+
+/* adslFarEndPerformanceStats Flags */
+#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data)
+#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */
+#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */
+#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */
+#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */
+#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */
+#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data)
+#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data)
+#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */
+#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data)
+#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data)
+#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */
+#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data)
+#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */
+#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data)
+#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */
+#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data)
+#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */
+#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data)
+#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */
+#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data)
+#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */
+#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data)
+#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data)
+#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */
+// 603221:tc.chen end
+/* TR-69 related additional parameters - defines */
+/* Defines for struct adslATURSubcarrierInfo */
+#define NEAREND_HLINSC 0x1
+#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data)
+#define NEAREND_HLINPS 0x2
+#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data)
+#define NEAREND_HLOGMT 0x4
+#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data)
+#define NEAREND_HLOGPS 0x8
+#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data)
+#define NEAREND_QLNMT 0x10
+#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data)
+#define NEAREND_QLNPS 0x20
+#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data)
+#define NEAREND_SNRMT 0x40
+#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data)
+#define NEAREND_SNRPS 0x80
+#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data)
+#define NEAREND_BITPS 0x100
+#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data)
+#define NEAREND_GAINPS 0x200
+#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data)
+
+/* Defines for struct adslATUCSubcarrierInfo */
+#define FAREND_HLINSC 0x1
+#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 0, 1, data)
+#define FAREND_HLINPS 0x2
+#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data)
+#define FAREND_HLOGMT 0x4
+#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data)
+#define FAREND_HLOGPS 0x8
+#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data)
+#define FAREND_QLNMT 0x10
+#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data)
+#define FAREND_QLNPS 0x20
+#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data)
+#define FAREND_SNRMT 0x40
+#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data)
+#define FAREND_SNRPS 0x80
+#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data)
+#define FAREND_BITPS 0x100
+#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data)
+#define FAREND_GAINPS 0x200
+#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data)
+
+
+// GET_ADSL_POWER_SPECTRAL_DENSITY
+#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data)
+#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data)
+#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data)
+#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data)
+#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data)
+#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data)
+
+
+#endif
+/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing
+
+#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val))
+// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer
+
+#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0)
+// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer
+
+
+#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit))
+// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer
+
+
+////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION
+
+//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type.
+ //
+#define u32 unsigned int
+#define u16 unsigned short
+#define s16 short
+#define u8 unsigned char
+
+
+typedef u32 AdslPerfTimeElapsed;
+typedef u32 AdslPerfPrevDayCount;
+typedef u32 PerfCurrentCount;
+typedef u32 PerfIntervalCount;
+typedef u32 AdslPerfCurrDayCount;
+
+
+//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry)
+
+typedef struct adslLineTableEntry {
+ int ifIndex;
+ int adslLineCode;
+ u8 flags;
+} adslLineTableEntry;
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+typedef struct adslLineExtTableEntry {
+ int ifIndex;
+ u16 adslLineTransAtucCap;
+ u16 adslLineTransAtucConfig;
+ u16 adslLineTransAtucActual;
+ int adslLineGlitePowerState;
+ u32 flags;
+}adslLineExtTableEntry;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry)
+
+typedef struct adslVendorId {
+ u16 country_code;
+ u_char provider_id[4]; /* Ascii characters */
+ u_char revision_info[2];
+}adslVendorId;
+
+
+typedef struct adslAtucPhysEntry {
+ int ifIndex;
+ char serial_no[32];
+ union {
+ char vendor_id[16];
+ adslVendorId vendor_info;
+ } vendor_id;
+
+ char version_no[16];
+ u32 status;
+ int outputPwr;
+ u32 attainableRate;
+ u8 flags;
+} adslAtucPhysEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry)
+
+typedef struct adslAturPhysEntry {
+ int ifIndex;
+ char serial_no[32];
+ union {
+ char vendor_id[16];
+ adslVendorId vendor_info;
+ } vendor_id;
+ char version_no[16];
+ int SnrMgn;
+ u32 Attn;
+ u32 status;
+ int outputPwr;
+ u32 attainableRate;
+ u8 flags;
+} adslAturPhysEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo)
+
+typedef struct adslAtucChanInfo {
+ int ifIndex;
+ u32 interleaveDelay;
+ u32 currTxRate;
+ u32 prevTxRate;
+ u8 flags;
+} adslAtucChanInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo)
+
+typedef struct adslAturChanInfo {
+ int ifIndex;
+ u32 interleaveDelay;
+ u32 currTxRate;
+ u32 prevTxRate;
+ u32 crcBlkLen;
+ u8 flags;
+} adslAturChanInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry)
+
+typedef struct atucPerfDataEntry
+{
+ int ifIndex;
+ u32 adslAtucPerfLofs;
+ u32 adslAtucPerfLoss;
+ u32 adslAtucPerfESs;
+ u32 adslAtucPerfInits;
+ int adslAtucPerfValidIntervals;
+ int adslAtucPerfInvalidIntervals;
+ AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed;
+ PerfCurrentCount adslAtucPerfCurr15MinLofs;
+ PerfCurrentCount adslAtucPerfCurr15MinLoss;
+ PerfCurrentCount adslAtucPerfCurr15MinESs;
+ PerfCurrentCount adslAtucPerfCurr15MinInits;
+ AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed;
+ AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs;
+ AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss;
+ AdslPerfCurrDayCount adslAtucPerfCurr1DayESs;
+ AdslPerfCurrDayCount adslAtucPerfCurr1DayInits;
+ int adslAtucPerfPrev1DayMoniSecs;
+ AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs;
+ AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss;
+ AdslPerfPrevDayCount adslAtucPerfPrev1DayESs;
+ AdslPerfPrevDayCount adslAtucPerfPrev1DayInits;
+ u32 flags;
+} atucPerfDataEntry;
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+typedef struct atucPerfDataExtEntry
+ {
+ int ifIndex;
+ u32 adslAtucPerfStatFastR;
+ u32 adslAtucPerfStatFailedFastR;
+ u32 adslAtucPerfStatSesL;
+ u32 adslAtucPerfStatUasL;
+ u32 adslAtucPerfCurr15MinFastR;
+ u32 adslAtucPerfCurr15MinFailedFastR;
+ u32 adslAtucPerfCurr15MinSesL;
+ u32 adslAtucPerfCurr15MinUasL;
+ u32 adslAtucPerfCurr1DayFastR;
+ u32 adslAtucPerfCurr1DayFailedFastR;
+ u32 adslAtucPerfCurr1DaySesL;
+ u32 adslAtucPerfCurr1DayUasL;
+ u32 adslAtucPerfPrev1DayFastR;
+ u32 adslAtucPerfPrev1DayFailedFastR;
+ u32 adslAtucPerfPrev1DaySesL;
+ u32 adslAtucPerfPrev1DayUasL;
+ u32 flags;
+} atucPerfDataExtEntry;
+
+#endif
+//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry)
+
+typedef struct aturPerfDataEntry
+{
+ int ifIndex;
+ u32 adslAturPerfLofs;
+ u32 adslAturPerfLoss;
+ u32 adslAturPerfLprs;
+ u32 adslAturPerfESs;
+ int adslAturPerfValidIntervals;
+ int adslAturPerfInvalidIntervals;
+ AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed;
+ PerfCurrentCount adslAturPerfCurr15MinLofs;
+ PerfCurrentCount adslAturPerfCurr15MinLoss;
+ PerfCurrentCount adslAturPerfCurr15MinLprs;
+ PerfCurrentCount adslAturPerfCurr15MinESs;
+ AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed;
+ AdslPerfCurrDayCount adslAturPerfCurr1DayLofs;
+ AdslPerfCurrDayCount adslAturPerfCurr1DayLoss;
+ AdslPerfCurrDayCount adslAturPerfCurr1DayLprs;
+ AdslPerfCurrDayCount adslAturPerfCurr1DayESs;
+ int adslAturPerfPrev1DayMoniSecs;
+ AdslPerfPrevDayCount adslAturPerfPrev1DayLofs;
+ AdslPerfPrevDayCount adslAturPerfPrev1DayLoss;
+ AdslPerfPrevDayCount adslAturPerfPrev1DayLprs;
+ AdslPerfPrevDayCount adslAturPerfPrev1DayESs;
+ u32 flags;
+} aturPerfDataEntry;
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+typedef struct aturPerfDataExtEntry
+ {
+ int ifIndex;
+ u32 adslAturPerfStatSesL;
+ u32 adslAturPerfStatUasL;
+ u32 adslAturPerfCurr15MinSesL;
+ u32 adslAturPerfCurr15MinUasL;
+ u32 adslAturPerfCurr1DaySesL;
+ u32 adslAturPerfCurr1DayUasL;
+ u32 adslAturPerfPrev1DaySesL;
+ u32 adslAturPerfPrev1DayUasL;
+ u32 flags;
+} aturPerfDataExtEntry;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo)
+
+typedef struct adslAtucIntvlInfo {
+ int ifIndex;
+ int IntervalNumber;
+ PerfIntervalCount intervalLOF;
+ PerfIntervalCount intervalLOS;
+ PerfIntervalCount intervalES;
+ PerfIntervalCount intervalInits;
+ int intervalValidData;
+ u8 flags;
+} adslAtucIntvlInfo;
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+typedef struct adslAtucInvtlExtInfo
+ {
+ int ifIndex;
+ int IntervalNumber;
+ u32 adslAtucIntervalFastR;
+ u32 adslAtucIntervalFailedFastR;
+ u32 adslAtucIntervalSesL;
+ u32 adslAtucIntervalUasL;
+ u32 flags;
+} adslAtucInvtlExtInfo;
+#endif
+//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo)
+
+typedef struct adslAturIntvlInfo {
+ int ifIndex;
+ int IntervalNumber;
+ PerfIntervalCount intervalLOF;
+ PerfIntervalCount intervalLOS;
+ PerfIntervalCount intervalLPR;
+ PerfIntervalCount intervalES;
+ int intervalValidData;
+ u8 flags;
+} adslAturIntvlInfo;
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+typedef struct adslAturInvtlExtInfo
+ {
+ int ifIndex;
+ int IntervalNumber;
+ u32 adslAturIntervalSesL;
+ u32 adslAturIntervalUasL;
+ u32 flags;
+} adslAturInvtlExtInfo;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry)
+
+typedef struct atucChannelPerfDataEntry
+{
+ int ifIndex;
+ u32 adslAtucChanReceivedBlks;
+ u32 adslAtucChanTransmittedBlks;
+ u32 adslAtucChanCorrectedBlks;
+ u32 adslAtucChanUncorrectBlks;
+ int adslAtucChanPerfValidIntervals;
+ int adslAtucChanPerfInvalidIntervals;
+ AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed;
+ PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks;
+ PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks;
+ PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks;
+ PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks;
+ AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed;
+ AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks;
+ AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks;
+ AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks;
+ AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks;
+ int adslAtucChanPerfPrev1DayMoniSecs;
+ AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks;
+ AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks;
+ AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks;
+ AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks;
+ u32 flags;
+}atucChannelPerfDataEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry)
+
+typedef struct aturChannelPerfDataEntry
+{
+ int ifIndex;
+ u32 adslAturChanReceivedBlks;
+ u32 adslAturChanTransmittedBlks;
+ u32 adslAturChanCorrectedBlks;
+ u32 adslAturChanUncorrectBlks;
+ int adslAturChanPerfValidIntervals;
+ int adslAturChanPerfInvalidIntervals;
+ AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed;
+ PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks;
+ PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks;
+ PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks;
+ PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks;
+ AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed;
+ AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks;
+ AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks;
+ AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks;
+ AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks;
+ int adslAturChanPerfPrev1DayMoniSecs;
+ AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks;
+ AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks;
+ AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks;
+ AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks;
+ u32 flags;
+} aturChannelPerfDataEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo)
+
+typedef struct adslAtucChanIntvlInfo {
+ int ifIndex;
+ int IntervalNumber;
+ PerfIntervalCount chanIntervalRecvdBlks;
+ PerfIntervalCount chanIntervalXmitBlks;
+ PerfIntervalCount chanIntervalCorrectedBlks;
+ PerfIntervalCount chanIntervalUncorrectBlks;
+ int intervalValidData;
+ u8 flags;
+} adslAtucChanIntvlInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo)
+
+typedef struct adslAturChanIntvlInfo {
+ int ifIndex;
+ int IntervalNumber;
+ PerfIntervalCount chanIntervalRecvdBlks;
+ PerfIntervalCount chanIntervalXmitBlks;
+ PerfIntervalCount chanIntervalCorrectedBlks;
+ PerfIntervalCount chanIntervalUncorrectBlks;
+ int intervalValidData;
+ u8 flags;
+} adslAturChanIntvlInfo;
+
+
+//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry)
+//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry)
+
+typedef struct adslLineAlarmConfProfileEntry
+ {
+ unsigned char adslLineAlarmConfProfileName[32];
+ int adslAtucThresh15MinLofs;
+ int adslAtucThresh15MinLoss;
+ int adslAtucThresh15MinESs;
+ u32 adslAtucThreshFastRateUp;
+ u32 adslAtucThreshInterleaveRateUp;
+ u32 adslAtucThreshFastRateDown;
+ u32 adslAtucThreshInterleaveRateDown;
+ int adslAtucInitFailureTrapEnable;
+ int adslAturThresh15MinLofs;
+ int adslAturThresh15MinLoss;
+ int adslAturThresh15MinLprs;
+ int adslAturThresh15MinESs;
+ u32 adslAturThreshFastRateUp;
+ u32 adslAturThreshInterleaveRateUp;
+ u32 adslAturThreshFastRateDown;
+ u32 adslAturThreshInterleaveRateDown;
+ int adslLineAlarmConfProfileRowStatus;
+ u32 flags;
+} adslLineAlarmConfProfileEntry;
+
+#ifdef AMAZON_MEI_MIB_RFC3440
+typedef struct adslLineAlarmConfProfileExtEntry
+ {
+ u8 adslLineAlarmConfProfileExtName[32];
+ u32 adslAtucThreshold15MinFailedFastR;
+ u32 adslAtucThreshold15MinSesL;
+ u32 adslAtucThreshold15MinUasL;
+ u32 adslAturThreshold15MinSesL;
+ u32 adslAturThreshold15MinUasL;
+ u32 flags;
+} adslLineAlarmConfProfileExtEntry;
+#endif
+//TRAPS
+
+// 603221:tc.chen start
+/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */
+typedef struct adslLineStatus
+ {
+ int adslModemStatus;
+ u32 adslModeSelected;
+ int adslAtucThresh15MinESs;
+ int adslTrellisCodeEnable;
+ int adslLatency;
+ u8 flags;
+ } adslLineStatusInfo;
+
+typedef struct adslLineRate
+ {
+ u32 adslDataRateds;
+ u32 adslDataRateus;
+ u32 adslATTNDRds;
+ u32 adslATTNDRus;
+ u8 flags;
+ } adslLineRateInfo;
+
+typedef struct adslLineInfo
+ {
+ u32 adslInterleaveDepthds;
+ u32 adslInterleaveDepthus;
+ u32 adslLATNds;
+ u32 adslLATNus;
+ u32 adslSATNds;
+ u32 adslSATNus;
+ int adslSNRMds;
+ int adslSNRMus;
+ int adslACATPds;
+ int adslACATPus;
+ u32 flags;
+ } adslLineInfo;
+
+typedef struct adslNearEndPerfStats
+ {
+ u32 adslSuperFrames;
+ u32 adslneLOS;
+ u32 adslneLOF;
+ u32 adslneLPR;
+ u32 adslneNCD;
+ u32 adslneLCD;
+ u32 adslneCRC;
+ u32 adslneRSCorr;
+ u32 adslneFECS;
+ u32 adslneES;
+ u32 adslneSES;
+ u32 adslneLOSS;
+ u32 adslneUAS;
+ u32 adslneHECErrors;
+ u32 flags;
+ } adslNearEndPerfStats;
+
+typedef struct adslFarEndPerfStats
+ {
+ u32 adslfeLOS;
+ u32 adslfeLOF;
+ u32 adslfeLPR;
+ u32 adslfeNCD;
+ u32 adslfeLCD;
+ u32 adslfeCRC;
+ u32 adslfeRSCorr;
+ u32 adslfeFECS;
+ u32 adslfeES;
+ u32 adslfeSES;
+ u32 adslfeLOSS;
+ u32 adslfeUAS;
+ u32 adslfeHECErrors;
+ u32 flags;
+ } adslFarEndPerfStats;
+// 603221:tc.chen end
+
+/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */
+typedef struct adslATURSubcarrierInfo {
+ int ifindex;
+ u16 HLINSCds;
+ u16 HLINpsds[1024];/* Even index = real part; Odd Index
+ = imaginary part for each tone */
+ u16 HLOGMTds;
+ u16 HLOGpsds[512];
+ u16 QLNMTds;
+ u16 QLNpsds[512];
+ u16 SNRMTds;
+ u16 SNRpsds[512];
+ u16 BITpsds[512];
+ u16 GAINpsds[512];
+ u16 flags;
+}adslATURSubcarrierInfo;
+
+typedef struct adslATUCSubcarrierInfo {
+ int ifindex;
+ u16 HLINSCus;
+ u16 HLINpsus[128];/* Even index = real part; Odd Index
+ = imaginary part for each tone */
+ u16 HLOGMTus;
+ u16 HLOGpsus[64];
+ u16 QLNMTus;
+ u16 QLNpsus[64];
+ u16 SNRMTus;
+ u16 SNRpsus[64];
+ u16 BITpsus[64];
+ u16 GAINpsus[64];
+ u16 flags;
+}adslATUCSubcarrierInfo;
+
+#ifndef u_int16
+#define u_int16 u16
+#endif
+
+typedef struct adslInitStats {
+ u_int16 FullInitializationCount;
+ u_int16 FailedFullInitializationCount;
+ u_int16 LINIT_Errors;
+ u_int16 Init_Timeouts;
+}adslInitStats;
+
+typedef struct adslPowerSpectralDensity {
+ int ACTPSDds;
+ int ACTPSDus;
+}adslPowerSpectralDensity;
+
+
+//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags)
+typedef union structpts {
+ adslLineTableEntry * adslLineTableEntry_pt;
+ adslAtucPhysEntry * adslAtucPhysEntry_pt;
+ adslAturPhysEntry * adslAturPhysEntry_pt;
+ adslAtucChanInfo * adslAtucChanInfo_pt;
+ adslAturChanInfo * adslAturChanInfo_pt;
+ atucPerfDataEntry * atucPerfDataEntry_pt;
+ aturPerfDataEntry * aturPerfDataEntry_pt;
+ adslAtucIntvlInfo * adslAtucIntvlInfo_pt;
+ adslAturIntvlInfo * adslAturIntvlInfo_pt;
+ atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt;
+ aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt;
+ adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt;
+ adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt;
+ adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt;
+ // RFC 3440
+
+ #ifdef AMAZON_MEI_MIB_RFC3440
+ adslLineExtTableEntry * adslLineExtTableEntry_pt;
+ atucPerfDataExtEntry * atucPerfDataExtEntry_pt;
+ adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt;
+ aturPerfDataExtEntry * aturPerfDataExtEntry_pt;
+ adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt;
+ adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt;
+ #endif
+// 603221:tc.chen start
+ adslLineStatusInfo * adslLineStatusInfo_pt;
+ adslLineRateInfo * adslLineRateInfo_pt;
+ adslLineInfo * adslLineInfo_pt;
+ adslNearEndPerfStats * adslNearEndPerfStats_pt;
+ adslFarEndPerfStats * adslFarEndPerfStats_pt;
+// 603221:tc.chen end
+ adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt;
+ adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt;
+ adslPowerSpectralDensity * adslPowerSpectralDensity_pt;
+}structpts;
+
+#endif /* ] __AMAZON_MEI_APP_IOCTL_H */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h
new file mode 100644
index 0000000..02a150e
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h
@@ -0,0 +1,757 @@
+//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl
+#ifndef _AMAZON_MEI_IOCTL_H
+#define _AMAZON_MEI_IOCTL_H
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+#define PCM_BUFF_SIZE 1024 //bytes
+// interrupt numbers
+
+#ifndef _AMAZON_ADSL_APP
+
+typedef struct pcm_data_struct{
+ u16 S;
+ u16 temp;
+ u16 LSW;
+ u16 MSW;
+ u16 len;
+ u16 rdindex;
+ u16 wrindex;
+ u16 flow;
+
+ int finish;
+ u8 buff[PCM_BUFF_SIZE];
+ int point;
+}pcm_data_struct;
+
+typedef struct amazon_clreoc_pkt{
+ struct list_head list;
+ u8 * command; //point to clreoc command data
+ int len; //command length
+}amazon_clreoc_pkt;
+
+// Number of intervals
+#define INTERVAL_NUM 192 //two days
+typedef struct amazon_mei_mib{
+ struct list_head list;
+ struct timeval start_time; //start of current interval
+
+ int AtucPerfLof;
+ int AtucPerfLos;
+ int AtucPerfEs;
+ int AtucPerfInit;
+
+ int AturPerfLof;
+ int AturPerfLos;
+ int AturPerfLpr;
+ int AturPerfEs;
+
+ int AturChanPerfRxBlk;
+ int AturChanPerfTxBlk;
+ int AturChanPerfCorrBlk;
+ int AturChanPerfUncorrBlk;
+
+ //RFC-3440
+ int AtucPerfStatFastR;
+ int AtucPerfStatFailedFastR;
+ int AtucPerfStatSesL;
+ int AtucPerfStatUasL;
+ int AturPerfStatSesL;
+ int AturPerfStatUasL;
+}amazon_mei_mib;
+
+typedef struct adslChanPrevTxRate{
+ u32 adslAtucChanPrevTxRate;
+ u32 adslAturChanPrevTxRate;
+}adslChanPrevTxRate;
+
+typedef struct adslPhysCurrStatus{
+ u32 adslAtucCurrStatus;
+ u32 adslAturCurrStatus;
+}adslPhysCurrStatus;
+
+typedef struct ChanType{
+ int interleave;
+ int fast;
+// 603221:tc.chen start
+ int bearchannel0;
+ int bearchannel1;
+// 603221:tc.chen end
+}ChanType;
+
+typedef struct mib_previous_read{
+ u16 ATUC_PERF_ESS;
+ u16 ATUR_PERF_ESS;
+ u32 ATUR_CHAN_RECV_BLK;
+ u16 ATUR_CHAN_CORR_BLK_INTL;
+ u16 ATUR_CHAN_CORR_BLK_FAST;
+ u16 ATUR_CHAN_UNCORR_BLK_INTL;
+ u16 ATUR_CHAN_UNCORR_BLK_FAST;
+ u16 ATUC_PERF_STAT_FASTR;
+ u16 ATUC_PERF_STAT_FAILED_FASTR;
+ u16 ATUC_PERF_STAT_SESL;
+ u16 ATUC_PERF_STAT_UASL;
+ u16 ATUR_PERF_STAT_SESL;
+}mib_previous_read;
+
+typedef struct mib_flags_pretime{
+ struct timeval ATUC_PERF_LOSS_PTIME;
+ struct timeval ATUC_PERF_LOFS_PTIME;
+ struct timeval ATUR_PERF_LOSS_PTIME;
+ struct timeval ATUR_PERF_LOFS_PTIME;
+ struct timeval ATUR_PERF_LPR_PTIME;
+}mib_flags_pretime;
+
+ // cmv message structures
+#define MP_PAYLOAD_SIZE 12
+typedef struct mpmessage{
+ u16 iFunction;
+ u16 iGroup;
+ u16 iAddress;
+ u16 iIndex;
+ u16 iPayload[MP_PAYLOAD_SIZE];
+}MPMessage;
+#endif
+
+
+typedef struct meireg{
+ u32 iAddress;
+ u32 iData;
+}meireg;
+
+#define MEIDEBUG_BUFFER_SIZES 50
+typedef struct meidebug{
+ u32 iAddress;
+ u32 iCount;
+ u32 buffer[MEIDEBUG_BUFFER_SIZES];
+}meidebug;
+
+//==============================================================================
+// Group definitions
+//==============================================================================
+#define OPTN 5
+#define CNFG 8
+#define CNTL 1
+#define STAT 2
+#define RATE 6
+#define PLAM 7
+#define INFO 3
+#define TEST 4
+//==============================================================================
+// Opcode definitions
+//==============================================================================
+#define H2D_CMV_READ 0x00
+#define H2D_CMV_WRITE 0x04
+#define H2D_CMV_INDICATE_REPLY 0x10
+#define H2D_ERROR_OPCODE_UNKNOWN 0x20
+#define H2D_ERROR_CMV_UNKNOWN 0x30
+
+#define D2H_CMV_READ_REPLY 0x01
+#define D2H_CMV_WRITE_REPLY 0x05
+#define D2H_CMV_INDICATE 0x11
+#define D2H_ERROR_OPCODE_UNKNOWN 0x21
+#define D2H_ERROR_CMV_UNKNOWN 0x31
+#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41
+#define D2H_ERROR_CMV_WRITE_ONLY 0x51
+#define D2H_ERROR_CMV_READ_ONLY 0x61
+
+#define H2D_DEBUG_READ_DM 0x02
+#define H2D_DEBUG_READ_PM 0x06
+#define H2D_DEBUG_WRITE_DM 0x0a
+#define H2D_DEBUG_WRITE_PM 0x0e
+
+#define D2H_DEBUG_READ_DM_REPLY 0x03
+#define D2H_DEBUG_READ_FM_REPLY 0x07
+#define D2H_DEBUG_WRITE_DM_REPLY 0x0b
+#define D2H_DEBUG_WRITE_FM_REPLY 0x0f
+#define D2H_ERROR_ADDR_UNKNOWN 0x33
+
+#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1
+//==============================================================================
+// INFO register address field definitions
+//==============================================================================
+
+#define INFO_TxState 0
+#define INFO_RxState 1
+#define INFO_TxNextState 2
+#define INFO_RxNextState 3
+#define INFO_TxStateJumpFrom 4
+#define INFO_RxStateJumpFrom 5
+
+#define INFO_ReverbSnrBuf 8
+#define INFO_ReverbEchoSnrBuf 9
+#define INFO_MedleySnrBuf 10
+#define INFO_RxShowtimeSnrBuf 11
+#define INFO_DECdelay 12
+#define INFO_DECExponent 13
+#define INFO_DECTaps 14
+#define INFO_AECdelay 15
+#define INFO_AECExponent 16
+#define INFO_AECTaps 17
+#define INFO_TDQExponent 18
+#define INFO_TDQTaps 19
+#define INFO_FDQExponent 20
+#define INFO_FDQTaps 21
+#define INFO_USBat 22
+#define INFO_DSBat 23
+#define INFO_USFineGains 24
+#define INFO_DSFineGains 25
+#define INFO_BitloadFirstChannel 26
+#define INFO_BitloadLastChannel 27
+#define INFO_PollEOCData 28 // CO specific
+#define INFO_CSNRMargin 29 // CO specific
+#define INFO_RCMsgs1 30
+#define INFO_RMsgs1 31
+#define INFO_RMsgRA 32
+#define INFO_RCMsgRA 33
+#define INFO_RMsg2 34
+#define INFO_RCMsg2 35
+#define INFO_BitLoadOK 36
+#define INFO_RCRates1 37
+#define INFO_RRates1Tab 38
+#define INFO_RMsgs1Tab 39
+#define INFO_RMsgRATab 40
+#define INFO_RRatesRA 41
+#define INFO_RCRatesRA 42
+#define INFO_RRates2 43
+#define INFO_RCRates2 44
+#define INFO_PackedRMsg2 45
+#define INFO_RxBitSwapFlag 46
+#define INFO_TxBitSwapFlag 47
+#define INFO_ShowtimeSNRUpdateCount 48
+#define INFO_ShowtimeFDQUpdateCount 49
+#define INFO_ShowtimeDECUpdateCount 50
+#define INFO_CopyRxBuffer 51
+#define INFO_RxToneBuf 52
+#define INFO_TxToneBuf 53
+#define INFO_Version 54
+#define INFO_TimeStamp 55
+#define INFO_feVendorID 56
+#define INFO_feSerialNum 57
+#define INFO_feVersionNum 58
+#define INFO_BulkMemory 59 //Points to start of bulk memory
+#define INFO_neVendorID 60
+#define INFO_neVersionNum 61
+#define INFO_neSerialNum 62
+
+//==============================================================================
+// RATE register address field definitions
+//==============================================================================
+
+
+#define RATE_UsRate 0
+#define RATE_DsRate 1
+
+
+//==============================================================================
+// PLAM (Physical Layer Management) register address field definitions
+// (See G997.1 for reference)
+//==============================================================================
+
+
+ // ///
+ // Failure Flags ///
+ // ///
+
+#define PLAM_NearEndFailureFlags 0
+#define PLAM_FarEndFailureFlags 1
+
+ // ///
+ // Near End Failure Flags Bit Definitions ///
+ // ///
+
+// ADSL Failures ///
+#define PLAM_LOS_FailureBit 0x0001
+#define PLAM_LOF_FailureBit 0x0002
+#define PLAM_LPR_FailureBit 0x0004
+#define PLAM_RFI_FailureBit 0x0008
+
+// ATM Failures ///
+#define PLAM_NCD_LP0_FailureBit 0x0010
+#define PLAM_NCD_LP1_FailureBit 0x0020
+#define PLAM_LCD_LP0_FailureBit 0x0040
+#define PLAM_LCD_LP1_FailureBit 0x0080
+
+#define PLAM_NCD_BC0_FailureBit 0x0100
+#define PLAM_NCD_BC1_FailureBit 0x0200
+#define PLAM_LCD_BC0_FailureBit 0x0400
+#define PLAM_LCD_BC1_FailureBit 0x0800
+ // ///
+ // Performance Counts ///
+ // ///
+
+#define PLAM_NearEndCrcCnt 2
+#define PLAM_CorrectedRSErrors 3
+
+#define PLAM_NearEndECSCnt 6
+#define PLAM_NearEndESCnt 7
+#define PLAM_NearEndSESCnt 8
+#define PLAM_NearEndLOSSCnt 9
+#define PLAM_NearEndUASLCnt 10
+
+#define PLAM_NearEndHECErrCnt 11
+
+#define PLAM_NearEndHECTotCnt 16
+#define PLAM_NearEndCellTotCnt 18
+#define PLAM_NearEndSfCntLSW 20
+#define PLAM_NearEndSfCntMSW 21
+
+#define PLAM_FarEndFebeCnt 24
+
+#define PLAM_FarEndFecCnt 28
+
+#define PLAM_FarEndFECSCnt 32
+#define PLAM_FarEndESCnt 33
+#define PLAM_FarEndSESCnt 34
+#define PLAM_FarEndLOSSCnt 35
+#define PLAM_FarEndUASLCnt 36
+
+#define PLAM_FarEndHECErrCnt 37
+
+#define PLAM_FarEndHECTotCnt 41
+
+#define PLAM_FarEndCellTotCnt 43
+
+#define PLAM_LineAttn 45
+#define PLAM_SNRMargin 46
+
+
+//==============================================================================
+// CNTL register address and bit field definitions
+//==============================================================================
+
+
+#define CNTL_ModemControl 0
+
+#define CNTL_ModemReset 0x0
+#define CNTL_ModemStart 0x2
+
+
+//==============================================================================
+// STAT register address and bit field definitions
+//==============================================================================
+
+#define STAT_MacroState 0
+#define STAT_Mode 1
+#define STAT_DMTFramingMode 2
+#define STAT_SleepState 3
+#define STAT_Misc 4
+#define STAT_FailureState 5
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_OLRStatus provides status of OLR
+ //16-bit STAT_OLRStatus_DS
+ // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
+ // [3:2]: Reserved
+ // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA)
+ // [7:6]: Reserved
+ // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits).
+ // [11]: 1=Receive Response, 0=not
+ // [15:12]: Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_OLRStatus_DS 6
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_OLRStatus provides status of OLR
+ // 16-bit STAT_OLRStatus_US CMV
+ // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
+ // [3:2]: Reserved
+ // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA)
+ // [7:6]: Reserved
+ // [8]: 1=Request Received. 0=not.
+ // [10:9]: Reserved
+ // [11]: 1=Response Sent, 0=not
+ // [15:12]: Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+///
+#define STAT_OLRStatus_US 7
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_PMStatus provides status of PM
+ // 16-bit STAT_PMStatus CMV
+ // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted
+ // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM
+ // [3]: Reserved
+ // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim)
+ // [7:6]: Reserved
+ // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits).
+ // [11]: 1=Response, 0=not
+ // [15:12]: Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_PMStatus 8
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError
+ // [3:0]: OLR/PM response reason code
+ // [7:4]: OLR/PM Internal error code
+ // [15:8]: OLR/PM Reserved for future
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_OLRError_DS 9
+#define STAT_OLRError_US 10
+#define STAT_PMError 11
+
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_MacroState
+// MacroState reflects the high level state of the modem
+
+#define STAT_InitState 0x0000
+#define STAT_ReadyState 0x0001
+#define STAT_FailState 0x0002
+#define STAT_IdleState 0x0003
+#define STAT_QuietState 0x0004
+#define STAT_GhsState 0x0005
+#define STAT_FullInitState 0x0006
+#define STAT_ShowTimeState 0x0007
+#define STAT_FastRetrainState 0x0008
+#define STAT_LoopDiagMode 0x0009
+#define STAT_ShortInit 0x000A // Bis short initialization ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_Mode
+// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use
+// G.Hs or some other mechanism to negotiate the specific mode of operation.
+// The OPTN_modeControl CMV is used to select a set of desired modes.
+// The STAT_Mode CMV indicates which mode was actually selected.
+
+#define STAT_ConfigMode_T1413 0x0001
+#define STAT_ConfigMode_G992_2_AB 0x0002
+#define STAT_ConfigMode_G992_1_A 0x0004
+#define STAT_ConfigMode_G992_1_B 0x0008
+#define STAT_ConfigMode_G992_1_C 0x0010
+#define STAT_ConfigMode_G992_2_C 0x0020
+
+#define STAT_ConfigMode_G992_3_A 0x0100
+#define STAT_ConfigMode_G992_3_B 0x0200
+#define STAT_ConfigMode_G992_3_I 0x0400
+#define STAT_ConfigMode_G992_3_J 0x0800
+#define STAT_ConfigMode_G992_3_L 0x1000
+
+#define STAT_ConfigMode_G992_4_A 0x2000
+#define STAT_ConfigMode_G992_4_I 0x4000
+
+#define STAT_ConfigMode_G992_5 0x8000
+
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_DMTFramingMode
+// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode
+// status is not applicable in BIS mode and its value is undefined
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_FramingModeMask 0x0003
+
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_Misc
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_OverlappedSpectrum 0x0008
+#define STAT_TCM 0x0010
+#define STAT_TDQ_at_1104 0x0020
+#define STAT_T1413_Signal_Detected 0x0040
+#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1
+#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_FailureState
+// when the MacroSTate indicates the fail state, FailureState provides a failure code
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+
+#define E_CODE_NO_ERROR 0
+#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */
+#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */
+#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */
+#define E_CODE_TX_AOC_FIFO_OVERFLOW 4
+#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/
+#define E_CODE_BITLOAD 6 // bit loading fails */
+#define E_CODE_ST_ERROR 7 // showtime CRC error */
+#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */
+#define E_CODE_C_TONES 9 // detected C_TONES */
+#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */
+#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */
+#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */
+#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */
+#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */
+#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */
+#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */
+#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */
+#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */
+#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */
+#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */
+#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */
+#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */
+#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */
+#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */
+#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */
+#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */
+#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */
+#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */
+#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */
+#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */
+#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */
+#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */
+#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */
+#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */
+#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */
+#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */
+#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */
+#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */
+#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */
+#define E_CODE_BAD_MEM_ACCESS 46
+#define E_CODE_BAD_INSTRUCTION_ACCESS 47
+#define E_CODE_TX_EOC_FIFO_OVERFLOW 48
+#define E_CODE_RX_EOC_FIFO_OVERFLOW 49
+#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */
+
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//STAT_OLRStatus:
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_OLRPM_IDLE 0x0000
+#define STAT_OLRPM_IN_PROGRESS 0x0001
+#define STAT_OLRPM_COMPLETE 0x0002
+#define STAT_OLRPM_ABORTED 0x0003
+#define STAT_OLRPM_RESPONSE 0x0800
+
+#define STAT_OLR_BITSWAP 0x0010
+#define STAT_OLR_DRR 0x0020
+#define STAT_OLR_SRA 0x0030
+
+//STAT_PMStatus_US:
+#define STAT_PM_CO_REQ 0x0004
+#define STAT_PM_SIMPLE_REQ 0x0010
+#define STAT_PM_L2_REQ 0x0020
+#define STAT_PM_L2_TRIM_REQ 0x0030
+
+// STAT_OLRError_DS, STAT_OLRError_US
+//4 bit response reason code:
+#define RESP_BUSY 0x01
+#define RESP_INVALID_PARAMETERS 0x02
+#define RESP_NOT_ENABLED 0x03
+#define RESP_NOT_SUPPORTED 0x04
+
+//4 bit internal error code (common for OLR and PM)
+#define REQ_INVALID_BiGi 0x10
+#define REQ_INVALID_Lp 0x20
+#define REQ_INVALID_Bpn 0x30
+#define REQ_INVALID_FRAMING_CONSTRAINT 0x40
+#define REQ_NOT_IN_L0_STATE 0x50
+#define REQ_NOT_IN_L2_STATE 0x60
+#define REQ_INVALID_PCB 0x70
+#define REQ_VIOLATES_MARGIN 0x80
+
+//STAT_PMError
+//4 bit response reason code:
+#define RESP_STATE_NOT_DESIRED 0x03
+#define RESP_INFEASIBLE_PARAMETERS 0x04
+
+
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN register address and bit field definitions
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_ModeControl 0
+#define OPTN_DMTLnkCtl 1
+// Reserved 2
+#define OPTN_GhsControl 3
+// Reserved 4
+#define OPTN_PwrManControl 5
+#define OPTN_AnnexControl 6
+#define OPTN_ModeControl1 7
+// Reserved 8
+#define OPTN_StateMachineCtrl 9
+// Reserved 10
+// Reserved 11
+#define OPTN_BisLinkControl 12
+#define OPTN_ATMAddrConfig 13
+#define OPTN_ATMNumCellConfig 14
+
+// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may ///
+// use G.Hs or some other mechanism to negotiate the specific mode of operation. ///
+// The OPTN_ModeControl CMV is used to select a set of desired modes ///
+// The STAT_ModeControl CMV indicates which mode was actually selected ///
+
+// OPTN_ModeControl
+#define OPTN_ConfigMode_T1413 0x0001
+#define OPTN_ConfigMode_G992_2_AB 0x0002
+#define OPTN_ConfigMode_G992_1_A 0x0004
+#define OPTN_ConfigMode_G992_1_B 0x0008
+#define OPTN_ConfigMode_G992_1_C 0x0010
+#define OPTN_ConfigMode_G992_2_C 0x0020
+
+#define OPTN_ConfigMode_G992_3_A 0x0100
+#define OPTN_ConfigMode_G992_3_B 0x0200
+#define OPTN_ConfigMode_G992_3_I 0x0400
+#define OPTN_ConfigMode_G992_3_J 0x0800
+#define OPTN_ConfigMode_G992_3_L 0x1000
+
+#define OPTN_ConfigMode_G992_4_A 0x2000
+#define OPTN_ConfigMode_G992_4_I 0x4000
+
+#define OPTN_ConfigMode_G992_5 0x8000
+
+// OPTN_PwrManControl
+#define OPTN_PwrManWakeUpGhs 0x1
+#define OPTN_PwrManWakeUpFR 0x2
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_DMT Link Control
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#define OPTN_DMT_DualLatency_Dis 0x200
+#define OPTN_DMT_S_Dis 0x100
+#define OPTN_DMT_FRAMINGMODE 0x1
+#define OPTN_DMT_FRAMINGMODE_MASK 0x7
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_BIS Link Control
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#define OPTN_BisLinkContrl_LineProbeDis 0x1
+#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2
+#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_GhsControl
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+// for OPTN_GhsControl, we will assign 16bit word as follows
+// bit 0~3: set the control over which start(initial) message CPE will send:
+//
+// BIT: 2 1 0
+// 0 0 1 CLR
+// 0 1 0 MR
+// 0 1 1 MS
+// 1 0 0 MP
+//
+// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange
+// BIT: 5 4
+// 0 1 MS
+// 1 0 MR
+// 1 1 MP
+//
+// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default.
+// BIT: 15
+// 1 means session one
+//
+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_GHS_ST_GHS 0x8000
+#define OPTN_GHS_INIT_MASK 0x000F
+#define OPTN_GHS_RESP_MASK 0x00F0
+
+#define OPTN_RTInitTxMsg_CLR 0x0001
+#define OPTN_RTInitTxMsg_MR 0x0002
+#define OPTN_RTInitTxMsg_MS 0x0003
+#define OPTN_RTInitTxMsg_MP 0x0004
+
+#define OPTN_RTRespTxMsg_MS 0x0010
+#define OPTN_RTRespTxMsg_MR 0x0020
+#define OPTN_RTRespTxMsg_MP 0x0030
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_AnnexControl
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+
+// G.992.3 Annex A/L1/L2 US PSD Mask preferred
+
+#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000
+#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask ///
+#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask ///
+#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask ///
+
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//OPTN_ATMAddrConfig
+// Bits 4:0 are Utopia address for BC1
+// Bits 9:5 are Utopia address for BC0
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_UTPADDR_BC1 0x001F
+#define OPTN_UTPADDR_BC0 0x03E0
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//OPTN_ATMNumCellConfig
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 ///
+#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 ///
+
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// CNFG register address field ///
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////
+// these cmvs are used by bis handshake ///
+///////////////////////////////////////////
+
+// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t)
+#define CNFG_TPS_TC_DS0 0
+#define CNFG_TPS_TC_DS1 1
+#define CNFG_TPS_TC_US0 2
+#define CNFG_TPS_TC_US1 3
+
+#define CNFG_HDLC_Overhead_Requirements 4
+
+// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t)
+#define CNFG_PMS_TC_DS0 5
+#define CNFG_PMS_TC_DS1 6
+#define CNFG_PMS_TC_US0 7
+#define CNFG_PMS_TC_US1 8
+
+// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t)
+#define CNFG_PMD_PARAMETERS 9
+
+////////////////////////////////////////////////////////////
+// these cmvs are used by bis training and showtime code ///
+////////////////////////////////////////////////////////////
+
+////////////////
+// Tx Config ///
+////////////////
+#define CNFG_tx_Cnfg_Nbc 10
+#define CNFG_tx_Cnfg_Nlp 11
+#define CNFG_tx_Cnfg_Rp 12
+#define CNFG_tx_Cnfg_Mp 13
+#define CNFG_tx_Cnfg_Lp 14
+#define CNFG_tx_Cnfg_Tp 15
+#define CNFG_tx_Cnfg_Dp 16
+#define CNFG_tx_Cnfg_Bpn 17
+#define CNFG_tx_Cnfg_FramingMode 18
+#define CNFG_tx_Cnfg_MSGLp 19
+#define CNFG_tx_Cnfg_MSGc 20
+
+
+////////////////
+// Rx Config ///
+////////////////
+#define CNFG_rx_Cnfg_Nbc 21
+#define CNFG_rx_Cnfg_Nlp 22
+#define CNFG_rx_Cnfg_Rp 23
+#define CNFG_rx_Cnfg_Mp 24
+#define CNFG_rx_Cnfg_Lp 25
+#define CNFG_rx_Cnfg_Tp 26
+#define CNFG_rx_Cnfg_Dp 27
+#define CNFG_rx_Cnfg_Bpn 28
+#define CNFG_rx_Cnfg_FramingMode 29
+#define CNFG_rx_Cnfg_MSGLp 30
+#define CNFG_rx_Cnfg_MSGc 31
+
+#define CNFG_tx_Cnfg_BCnToLPp 32
+#define CNFG_rx_Cnfg_BCnToLPp 33
+
+
+
+#endif
+
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h
new file mode 100644
index 0000000..3b73b53
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h
@@ -0,0 +1,176 @@
+#ifndef AMAZON_SW_H
+#define AMAZON_SW_H
+#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE
+#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1
+#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2
+#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3
+#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4
+#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5
+#define SET_ETH_REG SIOCDEVPRIVATE+6
+#define VLAN_TOOLS SIOCDEVPRIVATE+7
+#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8
+
+
+/*===mac table commands==*/
+#define RESET_MAC_TABLE 0
+#define READ_MAC_ENTRY 1
+#define WRITE_MAC_ENTRY 2
+#define ADD_MAC_ENTRY 3
+
+/*====vlan commands===*/
+
+#define CHANGE_VLAN_CTRL 0
+#define READ_VLAN_ENTRY 1
+#define UPDATE_VLAN_ENTRY 2
+#define CLEAR_VLAN_ENTRY 3
+#define RESET_VLAN_TABLE 4
+#define ADD_VLAN_ENTRY 5
+
+/*
+** MDIO constants.
+*/
+
+#define MDIO_BASE_STATUS_REG 0x1
+#define MDIO_BASE_CONTROL_REG 0x0
+#define MDIO_PHY_ID_HIGH_REG 0x2
+#define MDIO_PHY_ID_LOW_REG 0x3
+#define MDIO_BC_NEGOTIATE 0x0200
+#define MDIO_BC_FULL_DUPLEX_MASK 0x0100
+#define MDIO_BC_AUTO_NEG_MASK 0x1000
+#define MDIO_BC_SPEED_SELECT_MASK 0x2000
+#define MDIO_STATUS_100_FD 0x4000
+#define MDIO_STATUS_100_HD 0x2000
+#define MDIO_STATUS_10_FD 0x1000
+#define MDIO_STATUS_10_HD 0x0800
+#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800
+#define MDIO_ADVERTISMENT_REG 0x4
+#define MDIO_ADVERT_100_FD 0x100
+#define MDIO_ADVERT_100_HD 0x080
+#define MDIO_ADVERT_10_FD 0x040
+#define MDIO_ADVERT_10_HD 0x020
+#define MDIO_LINK_UP_MASK 0x4
+#define MDIO_START 0x1
+#define MDIO_READ 0x2
+#define MDIO_WRITE 0x1
+#define MDIO_PREAMBLE 0xfffffffful
+
+#define PHY_RESET 0x8000
+#define AUTO_NEGOTIATION_ENABLE 0X1000
+#define AUTO_NEGOTIATION_COMPLETE 0x20
+#define RESTART_AUTO_NEGOTIATION 0X200
+
+
+#define PHY0_ADDR 0
+#define PHY1_ADDR 1
+#define P1M 0
+
+#define AMAZON_SW_REG32(reg_num) *((volatile u32*)(reg_num))
+
+#define OK 0;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+typedef struct mac_table_entry{
+ u64 mac_address:48;
+ u64 p0:1;
+ u64 p1:1;
+ u64 p2:1;
+ u64 cr:1;
+ u64 ma_st:3;
+ u64 res:9;
+}_mac_table_entry;
+
+typedef struct IFX_Switch_VLanTableEntry{
+ u32 vlan_id:12;
+ u32 mp0:1;
+ u32 mp1:1;
+ u32 mp2:1;
+ u32 v:1;
+ u32 res:16;
+}_IFX_Switch_VLanTableEntry;
+
+typedef struct mac_table_req{
+ int cmd;
+ int index;
+ u32 data;
+ u64 entry_value;
+}_mac_table_req;
+
+#else //not CONFIG_CPU_LITTLE_ENDIAN
+typedef struct mac_table_entry{
+ u64 mac_address:48;
+ u64 p0:1;
+ u64 p1:1;
+ u64 p2:1;
+ u64 cr:1;
+ u64 ma_st:3;
+ u64 res:9;
+}_mac_table_entry;
+
+typedef struct IFX_Switch_VLanTableEntry{
+ u32 vlan_id:12;
+ u32 mp0:1;
+ u32 mp1:1;
+ u32 mp2:1;
+ u32 v:1;
+ u32 res:16;
+}_IFX_Switch_VLanTableEntry;
+
+
+typedef struct mac_table_req{
+ int cmd;
+ int index;
+ u32 data;
+ u64 entry_value;
+}_mac_table_req;
+
+#endif //CONFIG_CPU_LITTLE_ENDIAN
+
+
+
+typedef struct vlan_req{
+ int cmd;
+ int index;
+ u32 data;
+ u32 entry_value;
+}_vlan_req;
+
+typedef struct data_req{
+ int index;
+ u32 value;
+}_data_req;
+
+enum duplex
+{
+ half,
+ full,
+ autoneg
+};
+
+struct switch_priv {
+ struct net_device_stats stats;
+ int rx_packetlen;
+ u8 *rx_packetdata;
+ int rx_status;
+ int tx_packetlen;
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ int fc_bit;
+#endif //CONFIG_NET_HW_FLOWCONTROL
+ u8 *tx_packetdata;
+ int tx_status;
+ struct dma_device_info *dma_device;
+ struct sk_buff *skb;
+ spinlock_t lock;
+ int mdio_phy_addr;
+ int current_speed;
+ int current_speed_selection;
+ int rx_queue_len;
+ int full_duplex;
+ enum duplex current_duplex;
+};
+
+#endif //AMAZON_SW_H
+
+
+
+
+
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h
new file mode 100644
index 0000000..a64e6f9
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h
@@ -0,0 +1,258 @@
+#ifndef AMAZON_TPE_H
+#define AMAZON_TPE_H
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/netdevice.h>
+#include <linux/ioctl.h>
+
+#ifdef CONFIG_IFX_ATM_MIB
+/* For ATM-MIB lists */
+#include <linux/list.h>
+#endif
+#include <asm/amazon/atm_mib.h>
+
+/* CBM Queue arranagement
+ * Q0: free cells pool
+ * Q1~ Q15: upstream queues
+ * Q16: QAM downstream
+ * Q17~Q31: downstream queues
+ */
+#define AMAZON_ATM_MAX_QUEUE_NUM 32
+#define AMAZON_ATM_PORT_NUM 2
+#define AMAZON_ATM_FREE_CELLS 4000
+#define AMAZON_ATM_MAX_VCC_NUM (AMAZON_ATM_MAX_QUEUE_NUM/2 - 1)
+#define AMAZON_AAL0_SDU (ATM_AAL0_SDU+4) //one more word for status
+#define CBM_RX_OFFSET 16 //offset from the same q for tx
+#define AMAZON_ATM_OAM_Q_ID 16
+#define AMAZON_ATM_RM_Q_ID 16
+#define AMAZON_ATM_OTHER_Q_ID 16
+#define CBM_DEFAULT_Q_OFFSET 1
+#define HTUTIMEOUT 0xffff//timeoutofhtutocbm
+#define QSB_WFQ_NONUBR_MAX 0x3f00
+#define QSB_WFQ_UBR_BYPASS 0x3fff
+#define QSB_TP_TS_MAX 65472
+#define QSB_TAUS_MAX 64512
+#define QSB_GCR_MIN 18
+#define HTU_RAM_ACCESS_MAX 1024//maxium time for HTU RAM access
+
+#define SWIE_LOCK 1
+#define PROC_ATM 1
+#define PROC_MIB 2
+#define PROC_VCC 3
+#define PROC_AAL5 4
+#define PROC_CBM 5
+#define PROC_HTU 6
+#define PROC_QSB 7
+#define PROC_SWIE 8
+
+/***************** internal data structure ********************/
+typedef int (*push_back_t)(struct atm_vcc *vcc,struct sk_buff *skb,int err) ;
+/* Device private data */
+typedef struct{
+ u8 padding_byte;
+ u32 tx_max_sdu;
+ u32 rx_max_sdu;
+ u32 cnt_cpy; //no. of packets that need a copy due to alignment
+}amazon_aal5_dev_t;
+
+typedef struct{
+ u32 max_q_off; //maxium queues used in real scenario
+ u32 nrt_thr;
+ u32 clp0_thr;
+ u32 clp1_thr;
+ u32 free_cell_cnt;
+#ifdef CONFIG_USE_VENUS
+ u8 * qd_addr_free; //to work around a bug, bit15 of QDOFF address should be 1
+#endif
+ u8 * qd_addr;
+ u8 * mem_addr;
+ u8 allocated;
+}amazon_cbm_dev_t;
+
+typedef struct{
+
+}amazon_htu_dev_t;
+
+typedef struct{
+ u32 tau; //cell delay variation due to concurrency(?)
+ u32 tstepc; //time step, all legal values are 1,2,4
+ u32 sbl; //scheduler burse length (for PHY)
+}amazon_qsb_dev_t;
+
+typedef struct{
+ u32 qid; //QID of the current extraction queue
+ struct semaphore in_sem; // Software-Insertion semaphore
+ volatile long lock; //lock that avoids race contions between SWIN and SWEX
+ wait_queue_head_t sleep; //wait queue for SWIE and SWEX
+ u32 sw; //status word
+}amazon_swie_dev_t;
+
+//AAL5 MIB Counter
+typedef struct{
+ u32 tx,rx; //number AAL5 CPCS PDU from/to higher-layer
+ u32 tx_err,rx_err; //ifInErrors and ifOutErros
+ u32 tx_drop,rx_drop; //discarded received packets due to mm shortage
+ u32 htu_unp; //number of unknown received cells
+ u32 rx_cnt_h; //number of octets received, high 32 bits
+ u32 rx_cnt_l; //number of octets received, low 32 bits
+ u32 tx_cnt_h; //number of octets transmitted, high 32 bits
+ u32 tx_cnt_l; //number of octets transmitted, low 32 bits
+ u32 tx_ppd; //number of cells for AAL5 upstream PPD discards
+ u64 rx_cells; //number of cells for downstream
+ u64 tx_cells; //number of cells for upstream
+ u32 rx_err_cells; //number of cells dropped due to uncorrectable HEC errors
+}amazon_mib_counter_t;
+
+
+
+typedef enum {QS_PKT,QS_LEN,QS_ERR,QS_HW_DROP,QS_SW_DROP,QS_MAX} qs_t;
+//queue statics no. of packet received / sent
+//queue statics no. of bytes received / sent
+//queue statics no. of packets with error
+//queue statics no. of packets dropped by hw
+//queue statics no. of packets dropped by sw
+
+typedef struct{
+ push_back_t push; //call back function
+ struct atm_vcc * vcc; //opened vcc
+ struct timeval access_time; //time when last F4/F5 user cells arrive
+ int free; //whether this queue is occupied, 0: occupied, 1: free
+ u32 aal5VccCrcErrors; //MIB counter
+ u32 aal5VccOverSizedSDUs; //MIB counter
+
+#if defined(AMAZON_ATM_DEBUG) || defined (CONFIG_IFX_ATM_MIB)
+ u32 qs[QS_MAX];
+#endif
+}amazon_atm_queue_t;
+
+
+typedef struct{
+ int enable; //enable / disable
+ u32 max_conn; //maximum number of connections per port
+ u32 tx_max_cr; //Remaining cellrate for this device for tx direction
+ u32 tx_rem_cr; //Remaining cellrate for this device for tx direction
+ u32 tx_cur_cr; //Current cellrate for this device for tx direction
+}amazon_atm_port_t;
+
+typedef struct{
+ amazon_aal5_dev_t aal5;
+ amazon_cbm_dev_t cbm;
+ amazon_htu_dev_t htu;
+ amazon_qsb_dev_t qsb;
+ amazon_swie_dev_t swie;
+ amazon_mib_counter_t mib_counter;
+ amazon_atm_queue_t queues[AMAZON_ATM_MAX_QUEUE_NUM];
+ amazon_atm_port_t ports[AMAZON_ATM_PORT_NUM];
+ atomic_t dma_tx_free_0;//TX_CH0 has availabe descriptors
+} amazon_atm_dev_t;
+
+struct oam_last_activity{
+ u8 vpi; //vpi for this connection
+ u16 vci; //vci for t his connection
+ struct timeval stamp; //time when last F4/F5 user cells arrive
+ struct oam_last_activity * next;//for link list purpose
+};
+
+typedef union{
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ struct{
+ u32 tprs :16;
+ u32 twfq :14;
+ u32 vbr :1;
+ u32 reserved :1;
+ }bit;
+ u32 w0;
+#else
+ struct{
+ u32 reserved :1;
+ u32 vbr :1;
+ u32 twfq :14;
+ u32 tprs :16;
+ }bit;
+ u32 w0;
+#endif
+
+}qsb_qptl_t;
+
+typedef union{
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ struct{
+ u32 ts :16;
+ u32 taus :16;
+ }bit;
+ u32 w0;
+#else
+ struct{
+ u32 taus :16;
+ u32 ts :16;
+ }bit;
+ u32 w0;
+#endif
+}qsb_qvpt_t;
+
+
+
+struct amazon_atm_cell_header {
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ struct{
+ u32 clp :1; // Cell Loss Priority
+ u32 pti :3; // Payload Type Identifier
+ u32 vci :16; // Virtual Channel Identifier
+ u32 vpi :8; // Vitual Path Identifier
+ u32 gfc :4; // Generic Flow Control
+ }bit;
+#else
+ struct{
+ u32 gfc :4; // Generic Flow Control
+ u32 vpi :8; // Vitual Path Identifier
+ u32 vci :16; // Virtual Channel Identifier
+ u32 pti :3; // Payload Type Identifier
+ u32 clp :1; // Cell Loss Priority
+ }bit;
+#endif
+};
+
+
+/************************ Function Declarations **************************/
+amazon_atm_dev_t * amazon_atm_create(void);
+int amazon_atm_open(struct atm_vcc *vcc,push_back_t);
+int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb);
+int amazon_atm_send_oam(struct atm_vcc *vcc,void *cell, int flags);
+void amazon_atm_close(struct atm_vcc *vcc);
+void amazon_atm_cleanup(void);
+const struct oam_last_activity* get_oam_time_stamp(void);
+
+//mib-related
+int amazon_atm_cell_mib(atm_cell_ifEntry_t * to,u32 itf);
+int amazon_atm_aal5_mib(atm_aal5_ifEntry_t * to);
+int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t * to);
+int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to);
+
+#define AMAZON_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data); wmb();} while (0)
+#define AMAZON_READ_REGISTER_L(addr) (*((volatile u32*)(addr)))
+/******************************* ioctl stuff****************************************/
+#define NUM(dev) (MINOR(dev) & 0xf)
+/*
+ * Ioctl definitions
+ */
+/* Use 'o' as magic number */
+#define AMAZON_ATM_IOC_MAGIC 'o'
+/* MIB_CELL: get atm cell level mib counter
+ * MIB_AAL5: get aal5 mib counter
+ * MIB_VCC: get vcc mib counter
+ */
+typedef struct{
+ int vpi;
+ int vci;
+ atm_aal5_vcc_t mib_vcc;
+}atm_aal5_vcc_x_t;
+#define AMAZON_ATM_MIB_CELL _IOWR(AMAZON_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t)
+#define AMAZON_ATM_MIB_AAL5 _IOWR(AMAZON_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t)
+#define AMAZON_ATM_MIB_VCC _IOWR(AMAZON_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
+#define AMAZON_ATM_IOC_MAXNR 3
+
+//sockopt
+#define SO_AMAZON_ATM_MIB_VCC __SO_ENCODE(SOL_ATM,5,atm_aal5_vcc_t)
+
+#endif // AMAZON_TPE_H
+
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h
new file mode 100644
index 0000000..775dabc
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h
@@ -0,0 +1,23 @@
+#ifndef AMAZON_WDT_H
+#define AMAZON_WDT_H
+#ifdef __KERNEL__
+typedef struct wdt_dev{
+ char name[16];
+ int major;
+ int minor;
+
+ int full;
+ char buff[10];
+}wdt_dev;
+#define AMAZON_WDT_REG32(addr) (*((volatile u32*)(addr)))
+#endif //__KERNEL__
+
+//AMAZON_WDT_IOC_START: start the WDT timer (must provide a initial timeout value)
+//AMAZON_WDT_IOC_STOP: stop the WDT
+//AMAZON_WDT_IOC_PING: reload the timer to initial value (must happend after a AMAZON_WDT_IOC_START)
+#define AMAZON_WDT_IOC_MAGIC 0xc0
+#define AMAZON_WDT_IOC_START _IOW( AMAZON_WDT_IOC_MAGIC,0, int)
+#define AMAZON_WDT_IOC_STOP _IO( AMAZON_WDT_IOC_MAGIC,1)
+#define AMAZON_WDT_IOC_PING _IO( AMAZON_WDT_IOC_MAGIC,2)
+
+#endif //AMAZON_WDT_H
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h
new file mode 100644
index 0000000..8adda20
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h
@@ -0,0 +1,540 @@
+#ifndef ATM_DEFINES_H
+#define ATM_DEFINES_H
+
+//Registers Base Address
+#define IO_BASE_ADDR 0xA0000000
+#define AAL5_BASE_ADDRESS 0x10104400+IO_BASE_ADDR
+#define CBM_BASE_ADDRESS 0x10104000+IO_BASE_ADDR
+#define HTU_BASE_ADDRESS 0x10105100+IO_BASE_ADDR
+#define QSB_BASE_ADDRESS 0x10105000+IO_BASE_ADDR
+#define SWIE_BASE_ADDRESS 0x10105200+IO_BASE_ADDR
+
+//AAL5 Registers
+#define AAL5_SISR0_ADDR AAL5_BASE_ADDRESS+0x20
+#define AAL5_SIMR0_ADDR AAL5_BASE_ADDRESS+0x24
+#define AAL5_SISR1_ADDR AAL5_BASE_ADDRESS+0x28
+#define AAL5_SIMR1_ADDR AAL5_BASE_ADDRESS+0x2C
+#define AAL5_SMFL_ADDR AAL5_BASE_ADDRESS+0x30
+#define AAL5_SATMHD_ADDR AAL5_BASE_ADDRESS+0x34
+#define AAL5_SCON_ADDR AAL5_BASE_ADDRESS+0x38
+#define AAL5_SCMD_ADDR AAL5_BASE_ADDRESS+0x3C
+#define AAL5_RISR0_ADDR AAL5_BASE_ADDRESS+0x40
+#define AAL5_RIMR0_ADDR AAL5_BASE_ADDRESS+0x44
+#define AAL5_RISR1_ADDR AAL5_BASE_ADDRESS+0x48
+#define AAL5_RIMR1_ADDR AAL5_BASE_ADDRESS+0x4C
+#define AAL5_RMFL_ADDR AAL5_BASE_ADDRESS+0x50
+#define AAL5_RINTINF0_ADDR AAL5_BASE_ADDRESS+0x54
+#define AAL5_RINTINF1_ADDR AAL5_BASE_ADDRESS+0x58
+#define AAL5_RES5C_ADDR AAL5_BASE_ADDRESS+0x5C
+#define AAL5_RIOL_ADDR AAL5_BASE_ADDRESS+0x60
+#define AAL5_RIOM_ADDR AAL5_BASE_ADDRESS+0x64
+#define AAL5_SOOL_ADDR AAL5_BASE_ADDRESS+0x68
+#define AAL5_SOOM_ADDR AAL5_BASE_ADDRESS+0x6C
+#define AAL5_RES70_ADDR AAL5_BASE_ADDRESS+0x70
+#define AAL5_RES74_ADDR AAL5_BASE_ADDRESS+0x74
+#define AAL5_RES78_ADDR AAL5_BASE_ADDRESS+0x78
+#define AAL5_RES7C_ADDR AAL5_BASE_ADDRESS+0x7C
+#define AAL5_RES80_ADDR AAL5_BASE_ADDRESS+0x80
+#define AAL5_RES84_ADDR AAL5_BASE_ADDRESS+0x84
+#define AAL5_RES88_ADDR AAL5_BASE_ADDRESS+0x88
+#define AAL5_RES8C_ADDR AAL5_BASE_ADDRESS+0x8C
+#define AAL5_RES90_ADDR AAL5_BASE_ADDRESS+0x90
+#define AAL5_RES94_ADDR AAL5_BASE_ADDRESS+0x94
+#define AAL5_RES98_ADDR AAL5_BASE_ADDRESS+0x98
+#define AAL5_RES9C_ADDR AAL5_BASE_ADDRESS+0x9C
+#define AAL5_RESA0_ADDR AAL5_BASE_ADDRESS+0xA0
+#define AAL5_RESA4_ADDR AAL5_BASE_ADDRESS+0xA4
+#define AAL5_RESA8_ADDR AAL5_BASE_ADDRESS+0xA8
+#define AAL5_RESAC_ADDR AAL5_BASE_ADDRESS+0xAC
+#define AAL5_RESB0_ADDR AAL5_BASE_ADDRESS+0xB0
+#define AAL5_RESB4_ADDR AAL5_BASE_ADDRESS+0xB4
+#define AAL5_RESB8_ADDR AAL5_BASE_ADDRESS+0xB8
+#define AAL5_RESBC_ADDR AAL5_BASE_ADDRESS+0xBC
+#define AAL5_RESC0_ADDR AAL5_BASE_ADDRESS+0xC0
+#define AAL5_RESC4_ADDR AAL5_BASE_ADDRESS+0xC4
+#define AAL5_RESC8_ADDR AAL5_BASE_ADDRESS+0xC8
+#define AAL5_RESCC_ADDR AAL5_BASE_ADDRESS+0xCC
+#define AAL5_RESD0_ADDR AAL5_BASE_ADDRESS+0xD0
+#define AAL5_RESD4_ADDR AAL5_BASE_ADDRESS+0xD4
+#define AAL5_RESD8_ADDR AAL5_BASE_ADDRESS+0xD8
+#define AAL5_RESDC_ADDR AAL5_BASE_ADDRESS+0xDC
+#define AAL5_RESE0_ADDR AAL5_BASE_ADDRESS+0xE0
+#define AAL5_RESE4_ADDR AAL5_BASE_ADDRESS+0xE4
+#define AAL5_RESE8_ADDR AAL5_BASE_ADDRESS+0xE8
+#define AAL5_RESEC_ADDR AAL5_BASE_ADDRESS+0xEC
+#define AAL5_SSRC0_ADDR AAL5_BASE_ADDRESS+0xF0
+#define AAL5_SSRC1_ADDR AAL5_BASE_ADDRESS+0xF4
+#define AAL5_RSRC0_ADDR AAL5_BASE_ADDRESS+0xF8
+#define AAL5_RSRC1_ADDR AAL5_BASE_ADDRESS+0xFC
+
+#define AAL5S_ISR_QID_MASK 0xFF000000
+#define AAL5S_ISR_SAB 0x00000100
+#define AAL5S_ISR_SE 0x00000080
+#define AAL5S_ISR_MFLE 0x00000040
+#define AAL5S_ISR_SBE0 0x00000020
+#define AAL5S_ISR_SEG0 0x00000010
+#define AAL5S_ISR_TAB 0x00000004
+
+#define AAL5_SIMR_MASK 0x000001c7
+#define AAL5_SIMR_SAB 0x00000100
+#define AAL5_SIMR_SE 0x00000080
+#define AAL5_SIMR_MFLE 0x00000040
+#define AAL5_SIMR_TAB 0x00000004
+#define AAL5_SIMR_SBE0 0x00000002
+#define AAL5_SIMR_SEG0 0x00000001
+
+#define AAL5_SCMD_SEQCOUNT_MASK 0x0000ff00
+#define AAL5_SCMD_MODE_POLL 0x00000008
+#define AAL5_SCMD_MODE_COUNT 0x00000000
+#define AAL5_SCMD_AS 0x00000004
+#define AAL5_SCMD_SS 0x00000002
+#define AAL5_SCMD_AR 0x00000001
+
+#define AAL5R_ISR_CID_MASK 0xFF000000//ConnectionID
+#define AAL5R_ISR_DBC_MASK 0x00FF0000//DiscardedByteCounter
+#define AAL5R_ISR_END 0x00002000//End
+#define AAL5R_ISR_ICID 0x00001000//InvalidConnectionID
+#define AAL5R_ISR_CLP 0x00000800//CellLossPriority
+#define AAL5R_ISR_CGST 0x00000400//Congestion
+#define AAL5R_ISR_UUE 0x00000200//CPCSUUError
+#define AAL5R_ISR_CPIE 0x00000100//CPIError
+#define AAL5R_ISR_FE 0x00000080//FrameEnd
+#define AAL5R_ISR_MFLE 0x00000040//MaximumFrameLengthExceeded
+#define AAL5R_ISR_DBCE 0x00000020//DiscardedByteCounterExceeded
+#define AAL5R_ISR_CRC 0x00000010//CRCError
+#define AAL5R_ISR_ILEN 0x00000008//InvalidLength
+#define AAL5R_ISR_RAB 0x00000004//ReceiveAbort
+
+#define AAL5_RIMR1_MASK 0x00003ffc
+#define AAL5_RIMR1_END 0x00002000//End
+#define AAL5_RIMR1_ICID 0x00001000//InvalidConnectionID
+#define AAL5_RIMR1_CLP 0x00000800//CellLossPriority
+#define AAL5_RIMR1_CGST 0x00000400//Congestion
+#define AAL5_RIMR1_UUE 0x00000200//CPCSUUError
+#define AAL5_RIMR1_CPIE 0x00000100//CPIError
+#define AAL5_RIMR1_FE 0x00000080//FrameEnd
+#define AAL5_RIMR1_MFLE 0x00000040//MaximumFrameLengthExceeded
+#define AAL5_RIMR1_DBCE 0x00000020//DiscardedByteCounterExceeded
+#define AAL5_RIMR1_CRC 0x00000010//CRCError
+#define AAL5_RIMR1_ILEN 0x00000008//InvalidLength
+#define AAL5_RIMR1_RAB 0x00000004//ReceiveAbort
+
+//AAL5 Reassambly Errors
+#define AAL5_STW1_MASK 0x33//Error mask
+#define AAL5_STW0_MASK 0x5c//Error mask
+#define AAL5_STW0_BE 0x3//padding bytes mask
+#define AAL5_STW1_CBM 0x20//Transfer from CBM to A5R abnormally ended
+#define AAL5_STW1_CH 0x10//Invalid Channel number error
+#define AAL5_STW1_CLP 0x8//CLP value of cells in packet is 1
+#define AAL5_STW1_CG 0x4//Cell in packet expired congestion
+#define AAL5_STW1_UU 0x2//CPCS-UU value error
+#define AAL5_STW1_CPI 0x1//CPI value error
+#define AAL5_STW0_FE 0x80//Frame end
+#define AAL5_STW0_MFL 0x40//Maximum frame length error
+#define AAL5_STW0_CRC 0x10//CRC error
+#define AAL5_STW0_IL 0x8//Invalid length
+#define AAL5_STW0_RA 0x4//Received abort
+
+
+
+//CBM Registers
+#define CBM_NRTTHR_ADDR CBM_BASE_ADDRESS+0x10//NonRealTimeThreshold
+#define CBM_CLP0THR_ADDR CBM_BASE_ADDRESS+0x14//CLP0Threshold
+#define CBM_CLP1THR_ADDR CBM_BASE_ADDRESS+0x18//CLP1Threshold
+#define CBM_QDOFF_ADDR CBM_BASE_ADDRESS+0x1C//QueueDescriptorOffset
+#define CBM_CFG_ADDR CBM_BASE_ADDRESS+0x20//Configuration
+#define CBM_HWEXPAR0_ADDR CBM_BASE_ADDRESS+0x24//HWExtractParameter0
+#define CBM_RES28_ADDR CBM_BASE_ADDRESS+0x28
+#define CBM_WMSTAT0_ADDR CBM_BASE_ADDRESS+0x2C
+#define CBM_HWEXCMD_ADDR CBM_BASE_ADDRESS+0x30//HWExtractCommand0
+#define CBM_RES34_ADDR CBM_BASE_ADDRESS+0x34
+#define CBM_HWEXSTAT0_ADDR CBM_BASE_ADDRESS+0x38//HWExtractStatus0
+#define CBM_RES3C_ADDR CBM_BASE_ADDRESS+0x3C
+#define CBM_RES40_ADDR CBM_BASE_ADDRESS+0x40
+#define CBM_CNT_ADDR CBM_BASE_ADDRESS+0x44//CellCount
+#define CBM_RES48_ADDR CBM_BASE_ADDRESS+0x48
+#define CBM_LFR_ADDR CBM_BASE_ADDRESS+0x4C//PointertolastCellinfreeCellQueue
+#define CBM_FFR_ADDR CBM_BASE_ADDRESS+0x50//PointertofirstCellinfreeCellQueue
+#define CBM_RES54_ADDR CBM_BASE_ADDRESS+0x54
+#define CBM_RES58_ADDR CBM_BASE_ADDRESS+0x58
+#define CBM_RES5C_ADDR CBM_BASE_ADDRESS+0x5C
+#define CBM_RES60_ADDR CBM_BASE_ADDRESS+0x60
+#define CBM_RES64_ADDR CBM_BASE_ADDRESS+0x64
+#define CBM_RES68_ADDR CBM_BASE_ADDRESS+0x68
+#define CBM_RES6C_ADDR CBM_BASE_ADDRESS+0x6C
+#define CBM_RES70_ADDR CBM_BASE_ADDRESS+0x70
+#define CBM_RES74_ADDR CBM_BASE_ADDRESS+0x74
+#define CBM_RES78_ADDR CBM_BASE_ADDRESS+0x78
+#define CBM_RES7C_ADDR CBM_BASE_ADDRESS+0x7C
+#define CBM_RES80_ADDR CBM_BASE_ADDRESS+0x80
+#define CBM_RES84_ADDR CBM_BASE_ADDRESS+0x84
+#define CBM_RES88_ADDR CBM_BASE_ADDRESS+0x88
+#define CBM_RES8C_ADDR CBM_BASE_ADDRESS+0x8C
+#define CBM_RES90_ADDR CBM_BASE_ADDRESS+0x90
+#define CBM_RES94_ADDR CBM_BASE_ADDRESS+0x94
+#define CBM_RES98_ADDR CBM_BASE_ADDRESS+0x98
+#define CBM_RES9C_ADDR CBM_BASE_ADDRESS+0x9C
+#define CBM_RESA0_ADDR CBM_BASE_ADDRESS+0xA0
+#define CBM_RESA4_ADDR CBM_BASE_ADDRESS+0xA4
+#define CBM_RESA8_ADDR CBM_BASE_ADDRESS+0xA8
+#define CBM_RESAC_ADDR CBM_BASE_ADDRESS+0xAC
+#define CBM_RESB0_ADDR CBM_BASE_ADDRESS+0xB0
+#define CBM_RESB4_ADDR CBM_BASE_ADDRESS+0xB4
+#define CBM_RESB8_ADDR CBM_BASE_ADDRESS+0xB8
+#define CBM_RESBC_ADDR CBM_BASE_ADDRESS+0xBC
+#define CBM_INTINF0_ADDR CBM_BASE_ADDRESS+0xC0//InterruptInfo0
+#define CBM_INTCMD_ADDR CBM_BASE_ADDRESS+0xC4//InterruptCommand0
+#define CBM_IMR0_ADDR CBM_BASE_ADDRESS+0xC8//InterruptMask
+#define CBM_SRC0_ADDR CBM_BASE_ADDRESS+0xCC//ServiceRequestControl
+#define CBM_RESD0_ADDR CBM_BASE_ADDRESS+0xD0
+#define CBM_RESD4_ADDR CBM_BASE_ADDRESS+0xD4
+#define CBM_RESD8_ADDR CBM_BASE_ADDRESS+0xD8
+#define CBM_RESDC_ADDR CBM_BASE_ADDRESS+0xDC
+#define CBM_RESE0_ADDR CBM_BASE_ADDRESS+0xE0
+#define CBM_AAL5IDIS_ADDR CBM_BASE_ADDRESS+0xE4//MIB-No.EPDdiscardedpacketsupstream
+#define CBM_AAL5ODIS_ADDR CBM_BASE_ADDRESS+0xE8//MIB-No.PPDdiscardedpacketsupstream
+#define CBM_RESEC_ADDR CBM_BASE_ADDRESS+0xEC
+#define CBM_RESF0_ADDR CBM_BASE_ADDRESS+0xF0
+#define CBM_RESF4_ADDR CBM_BASE_ADDRESS+0xF4
+#define CBM_RESF8_ADDR CBM_BASE_ADDRESS+0xF8
+#define CBM_RESFC_ADDR CBM_BASE_ADDRESS+0xFC
+
+//CBMCFG
+#define CBM_CFG_INTLCK0EN 0x00000008
+#define CBM_CFG_INT0HLT 0x00000004
+#define CBM_CFG_START 0x00000001
+
+#define CBM_HWEXPAR_PN_A5 0x00002000
+#define CBM_HWEXPAR_PN_CM 0x00000000
+#define CBM_HWEXPAR_SUBADD_PORTMASK 0x00000070
+#define CBM_HWEXPAR_SUBADD_ADU 0x00000000
+#define CBM_HWEXPAR_SUBADD_AAL2 0x00000080
+#define CBM_HWEXPAR_SUBADD_SWIE 0x00000100
+
+#define CBM_HWEXCMD_SFE2 0x00000100
+#define CBM_HWEXCMD_FE2 0x00000080
+#define CBM_HWEXCMD_SCE2 0x00000040
+#define CBM_HWEXCMD_SFE1 0x00000020
+#define CBM_HWEXCMD_FE1 0x00000010
+#define CBM_HWEXCMD_SCE1 0x00000008
+#define CBM_HWEXCMD_SFE0 0x00000004
+#define CBM_HWEXCMD_FE0 0x00000002
+#define CBM_HWEXCMD_SCE0 0x00000001
+
+#define CBM_INTINF0_QID_MASK 0xFF000000
+#define CBM_INTINF0_ORIGIN_MASK 0x00F00000
+#define CBM_INTINF0_EF 0x00004000
+#define CBM_INTINF0_ACA 0x00002000
+#define CBM_INTINF0_ERR 0x00001000
+#define CBM_INTINF0_DISC 0x00000800
+#define CBM_INTINF0_QSBV 0x00000400
+#define CBM_INTINF0_Q0E 0x00000200
+#define CBM_INTINF0_Q0I 0x00000100
+#define CBM_INTINF0_RDE 0x00000080
+#define CBM_INTINF0_OPF 0x00000040
+#define CBM_INTINF0_NFCA 0x00000020
+#define CBM_INTINF0_CLP1TR 0x00000010
+#define CBM_INTINF0_CLP0TR 0x00000008
+#define CBM_INTINF0_NRTTR 0x00000004
+#define CBM_INTINF0_QFD 0x00000002
+#define CBM_INTINF0_QTR 0x00000001
+#define CBM_INTINF0_QID_SHIFT 24
+//CBM QD Word 3
+#define CBM_QD_W3_QOS_0 0x00000000
+#define CBM_QD_W3_QOS_1 0x40000000
+#define CBM_QD_W3_QOS_2 0x80000000
+#define CBM_QD_W3_QOS_3 0xc0000000
+
+#define CBM_QD_W3_DIR_UP 0x20000000
+#define CBM_QD_W3_DIR_DOWN 0x00000000
+
+#define CBM_QD_W3_CLPt 0x10000000
+#define CBM_QD_W3_RT 0x08000000
+#define CBM_QD_W3_AAL5 0x04000000
+
+#define CBM_QD_W3_INT_NOINT 0x00000000
+#define CBM_QD_W3_INT_ACA 0x01000000
+#define CBM_QD_W3_INT_EOF 0x02000000
+#define CBM_QD_W3_INT_BOTH 0x03000000
+
+#define CBM_QD_W3_THRESHOLD_MASK 0x00ff0000
+#define CBM_QD_W3_WM_EN 0x00000010
+#define CBM_QD_W3_HCR 0x00000008
+#define CBM_QD_W3_SBID_MASK 0x00000001
+
+#define CBM_QD_W3_THRESHOLD_SHIFT 16
+
+//WATER MARK STATUS
+#define CBM_WM_NRT_MASK 0x00040000
+#define CBM_WM_CLP0_MASK 0x00020000
+#define CBM_WM_CLP1_MASK 0x00010000
+
+//CBMNRTTHR, CBMCLP0THR, CBMCLP0THR
+#define CBM_NRT_WM_NONE 0x00000000//no water mark
+#define CBM_WM_3_1 0x00010000//3/4 to set, 1/4 to release
+#define CBM_WM_3_2 0x00020000//3/4 to set, 2/4 to release
+#define CBM_WM_2_1 0x00030000//2/4 to set, 1/4 to release
+#define CBM_THR_MASK 0x0000FFFF
+
+#define CBM_IMR_MASK 0x0000fbff
+#define CBM_IMR_reserved 0xFFFF0400
+#define CBM_IMR_RFULL 0x00008000//EndofFrame
+#define CBM_IMR_EF 0x00004000//EndofFrame
+#define CBM_IMR_ACA 0x00002000//AnyCellArrived
+#define CBM_IMR_ERR 0x00001000//FPI Error
+#define CBM_IMR_DISC 0x00000800//Discard
+#define CBM_IMR_reserved1 0x00000400//reserved
+#define CBM_IMR_Q0E 0x00000200//Queue0Extract
+#define CBM_IMR_Q0I 0x00000100//Queue0Insert
+#define CBM_IMR_RDE 0x00000080//ReadEmptyQueue
+#define CBM_IMR_OPF 0x00000040//OncePerFrame
+#define CBM_IMR_NFCA 0x00000020//NoFreeCellAvailable
+#define CBM_IMR_CLP1TR 0x00000010//CLP1ThresholdReached
+#define CBM_IMR_CLP0TR 0x00000008//CLP0ThresholdReached
+#define CBM_IMR_NRTTR 0x00000004//NonRealTimeThresholdReached
+#define CBM_IMR_QFD 0x00000002//QueueFrameDiscard
+#define CBM_IMR_QTR 0x00000001//QueueThresholdReached
+
+#define CBM_EXSTAT_FB 0x00000010
+#define CBM_EXSTAT_SCB 0x00000008
+#define CBM_EXSTAT_Q0 0x00000004
+#define CBM_EXSTAT_RDE 0x00000002
+#define CBM_EXSTAT_QV 0x00000001
+
+//HTU Registers
+#define HTU_RX0_ADDR HTU_BASE_ADDRESS+0x10
+#define HTU_RX1_ADDR HTU_BASE_ADDRESS+0x14
+#define HTU_RES18_ADDR HTU_BASE_ADDRESS+0x18
+#define HTU_RES1C_ADDR HTU_BASE_ADDRESS+0x1C
+#define HTU_RES20_ADDR HTU_BASE_ADDRESS+0x20
+#define HTU_RES24_ADDR HTU_BASE_ADDRESS+0x24
+#define HTU_RES28_ADDR HTU_BASE_ADDRESS+0x28
+#define HTU_RES2C_ADDR HTU_BASE_ADDRESS+0x2C
+#define HTU_PCF0PAT_ADDR HTU_BASE_ADDRESS+0x30
+#define HTU_PCF1PAT_ADDR HTU_BASE_ADDRESS+0x34
+#define HTU_RES38_ADDR HTU_BASE_ADDRESS+0x38
+#define HTU_RES3C_ADDR HTU_BASE_ADDRESS+0x3C
+#define HTU_RES40_ADDR HTU_BASE_ADDRESS+0x40
+#define HTU_RES44_ADDR HTU_BASE_ADDRESS+0x44
+#define HTU_RES48_ADDR HTU_BASE_ADDRESS+0x48
+#define HTU_RES4C_ADDR HTU_BASE_ADDRESS+0x4C
+#define HTU_PCF0MASK_ADDR HTU_BASE_ADDRESS+0x50
+#define HTU_PCF1MASK_ADDR HTU_BASE_ADDRESS+0x54
+#define HTU_RES58_ADDR HTU_BASE_ADDRESS+0x58
+#define HTU_RES5C_ADDR HTU_BASE_ADDRESS+0x5C
+#define HTU_RES60_ADDR HTU_BASE_ADDRESS+0x60
+#define HTU_RES64_ADDR HTU_BASE_ADDRESS+0x64
+#define HTU_RES68_ADDR HTU_BASE_ADDRESS+0x68
+#define HTU_RES6C_ADDR HTU_BASE_ADDRESS+0x6C
+#define HTU_TIMEOUT_ADDR HTU_BASE_ADDRESS+0x70
+#define HTU_DESTOAM_ADDR HTU_BASE_ADDRESS+0x74
+#define HTU_DESTRM_ADDR HTU_BASE_ADDRESS+0x78
+#define HTU_DESTOTHER_ADDR HTU_BASE_ADDRESS+0x7C
+#define HTU_CFG_ADDR HTU_BASE_ADDRESS+0x80
+#define HTU_RES84_ADDR HTU_BASE_ADDRESS+0x84
+#define HTU_RES88_ADDR HTU_BASE_ADDRESS+0x88
+#define HTU_RES8C_ADDR HTU_BASE_ADDRESS+0x8C
+#define HTU_INFNOENTRY_ADDR HTU_BASE_ADDRESS+0x90
+#define HTU_INFTIMEOUT_ADDR HTU_BASE_ADDRESS+0x94
+#define HTU_RES98_STAT HTU_BASE_ADDRESS+0x98
+#define HTU_RES9C_ADDR HTU_BASE_ADDRESS+0x9C
+#define HTU_MIBCIUP HTU_BASE_ADDRESS+0xA0//MIB Counter In Unknown Protoc Register
+#define HTU_CNTTIMEOUT_ADDR HTU_BASE_ADDRESS+0xA4
+#define HTU_RESA8_ADDR HTU_BASE_ADDRESS+0xA8
+#define HTU_RESAC_ADDR HTU_BASE_ADDRESS+0xAC
+#define HTU_RAMADDR_ADDR HTU_BASE_ADDRESS+0xB0
+#define HTU_RAMCMD_ADDR HTU_BASE_ADDRESS+0xB4
+#define HTU_RAMSTAT_ADDR HTU_BASE_ADDRESS+0xB8
+#define HTU_RESBC_ADDR HTU_BASE_ADDRESS+0xBC
+#define HTU_RAMDAT1_ADDR HTU_BASE_ADDRESS+0xC0
+#define HTU_RAMDAT2_ADDR HTU_BASE_ADDRESS+0xC4
+#define HTU_RESCC_ADDR HTU_BASE_ADDRESS+0xCC
+#define HTU_RESD0_ADDR HTU_BASE_ADDRESS+0xD0
+#define HTU_RESD4_ADDR HTU_BASE_ADDRESS+0xD4
+#define HTU_RESD8_ADDR HTU_BASE_ADDRESS+0xD8
+#define HTU_RESDC_ADDR HTU_BASE_ADDRESS+0xDC
+#define HTU_RESE0_ADDR HTU_BASE_ADDRESS+0xE0
+#define HTU_RESE4_ADDR HTU_BASE_ADDRESS+0xE4
+#define HTU_IMR0_ADDR HTU_BASE_ADDRESS+0xE8
+#define HTU_RESEC_ADDR HTU_BASE_ADDRESS+0xEC
+#define HTU_ISR0_ADDR HTU_BASE_ADDRESS+0xF0
+#define HTU_RESF4_ADDR HTU_BASE_ADDRESS+0xF4
+#define HTU_SRC0_ADDR HTU_BASE_ADDRESS+0xF8
+#define HTU_RESFC_ADDR HTU_BASE_ADDRESS+0xFC
+
+//HTU_CFG
+#define HTU_CFG_START 0x00000001
+
+#define HTU_RAMCMD_RMW 0x00000004
+#define HTU_RAMCMD_RD 0x00000002
+#define HTU_RAMCMD_WR 0x00000001
+
+#define HTU_RAMDAT1_VCON 0x00000080//validconnection
+#define HTU_RAMDAT1_VCT 0x00000040//vcivalueistransparent
+#define HTU_RAMDAT1_QIDS 0x00000020//qid selects a cell in cbm
+#define HTU_RAMDAT1_VCI3 0x00000010//vci3->oamqueue
+#define HTU_RAMDAT1_VCI4 0x00000008//vci4->oamqueue
+#define HTU_RAMDAT1_VCI6 0x00000004//vci6->rmqueue
+#define HTU_RAMDAT1_PTI4 0x00000002//pti4->oamqueue
+#define HTU_RAMDAT1_PTI5 0x00000001//pti5->oamqueue
+
+#define HTU_RAMDAT2_PTI6 0x00000800
+#define HTU_RAMDAT2_PTI7 0x00000400
+#define HTU_RAMDAT2_F4U 0x00000200
+#define HTU_RAMDAT2_F5U 0x00000100
+#define HTU_RAMDAT2_QID_MASK 0x000000ff
+
+#define HTU_ISR_NE 0x00000001
+#define HTU_ISR_TORD 0x00000002
+#define HTU_ISR_IT 0x00000008
+#define HTU_ISR_OTOC 0x00000010
+#define HTU_ISR_ONEC 0x00000020
+#define HTU_ISR_PNE 0x00000040
+#define HTU_ISR_PT 0x00000080
+#define HTU_ISR_MASK 0x000000ff
+
+
+//QSB Registers
+#define QSB_BIP0_ADDR QSB_BASE_ADDRESS+0x00
+#define QSB_BIP1_ADDR QSB_BASE_ADDRESS+0x04
+#define QSB_BIP2_ADDR QSB_BASE_ADDRESS+0x08
+#define QSB_BIP3_ADDR QSB_BASE_ADDRESS+0x0C
+#define QSB_RSVP_ADDR QSB_BASE_ADDRESS+0x10
+#define QSB_TNOW_ADDR QSB_BASE_ADDRESS+0x14
+#define QSB_TNOWCYC_ADDR QSB_BASE_ADDRESS+0x18
+#define QSB_TAU_ADDR QSB_BASE_ADDRESS+0x1C
+#define QSB_L1BRS_ADDR QSB_BASE_ADDRESS+0x20
+#define QSB_SBL_ADDR QSB_BASE_ADDRESS+0x24
+#define QSB_CONFIG_ADDR QSB_BASE_ADDRESS+0x28
+#define QSB_RTM_ADDR QSB_BASE_ADDRESS+0x2C
+#define QSB_RTD_ADDR QSB_BASE_ADDRESS+0x30
+#define QSB_RAMAC_ADDR QSB_BASE_ADDRESS+0x34
+#define QSB_ISR_ADDR QSB_BASE_ADDRESS+0x38
+#define QSB_IMR_ADDR QSB_BASE_ADDRESS+0x3C
+#define QSB_SRC_ADDR QSB_BASE_ADDRESS+0x40
+
+#define QSB_TABLESEL_QVPT 8
+#define QSB_TABLESEL_QPT 1
+#define QSB_TABLESEL_SCT 2
+#define QSB_TABLESEL_SPT 3
+#define QSB_TABLESEL_CALENDARWFQ 4/*notusedbyFW*/
+#define QSB_TABLESEL_L2WFQ 5/*notusedbyFW*/
+#define QSB_TABLESEL_CALENDARRS 6/*notusedbyFW*/
+#define QSB_TABLESEL_L2BITMAPRS 7/*notusedbyFW*/
+#define QSB_TABLESEL_SHIFT 24
+#define QSB_TWFQ_MASK 0x3FFF0000
+#define QSB_TPRS_MASK 0x0000FFFF
+#define QSB_SBID_MASK 0xF
+#define QSB_TWFQ_SHIFT 16
+#define QSB_SCDRATE_MASK 0x00007FFF
+#define QSB_SBVALID_MASK 0x80000000
+
+#define QSB_ISR_WFQLE 0x00000001
+#define QSB_ISR_WFQBE 0x00000002
+#define QSB_ISR_RSLE 0x00000004
+#define QSB_ISR_RSBE 0x00000008
+#define QSB_ISR_MUXOV 0x00000010
+#define QSB_ISR_CDVOV 0x00000020
+#define QSB_ISR_PARAMI 0x00000040
+#define QSB_ISR_SLOSS 0x00000080
+#define QSB_ISR_IIPS 0x00000100
+
+#define QSB_IMR_WFQLE 0x00000001
+#define QSB_IMR_WFQBE 0x00000002
+#define QSB_IMR_RSLE 0x00000004
+#define QSB_IMR_RSBE 0x00000008
+#define QSB_IMR_MUXOV 0x00000010
+#define QSB_IMR_CDVOV 0x00000020
+#define QSB_IMR_PARAMI 0x00000040
+#define QSB_IMR_SLOSS 0x00000080
+#define QSB_IMR_IIPS 0x00000100
+
+#define QSB_READ 0x0
+#define QSB_WRITE 0x80000000
+#define QSB_READ_ALL 0xFFFFFFFF
+
+#if 1 //some bug with QSB access mask
+#define QSB_QPT_SET_MASK 0x0
+#define QSB_QVPT_SET_MASK 0x0
+#define QSB_SET_SCT_MASK 0x0
+#define QSB_SET_SPT_MASK 0x0
+#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF
+#else //some bug with QSB access mask
+#define QSB_QPT_SET_MASK 0x80000000
+#define QSB_QVPT_SET_MASK 0x0
+#define QSB_SET_SCT_MASK 0xFFFFFFE0
+#define QSB_SET_SPT_MASK 0x7FF8C000
+#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF
+#endif //some bug with QSB access mask
+
+#define QSB_SPT_SBVALID 0x80000000
+
+#define QSB_RAMAC_REG_LOW 0x0
+#define QSB_RAMAC_REG_HIGH 0x00010000
+
+#define SRC_SRE_ENABLE 0x1000
+#define SRC_CLRR 0x4000 //request clear bit
+
+
+
+//SWIE Registers
+#define SWIE_IQID_ADDR SWIE_BASE_ADDRESS+0x0c//SWIEInsertQueueDescriptor
+#define SWIE_ICMD_ADDR SWIE_BASE_ADDRESS+0x10//SWIEInsertCommand
+#define SWIE_ISTAT_ADDR SWIE_BASE_ADDRESS+0x14//SWIEInsertStatus
+#define SWIE_ESTAT_ADDR SWIE_BASE_ADDRESS+0x18//SWIEExtractStatus
+#define SWIE_ISRC_ADDR SWIE_BASE_ADDRESS+0x74//SWIEInsertServiceRequestControl
+#define SWIE_ESRC_ADDR SWIE_BASE_ADDRESS+0x78//SWIEExtractServiceRequestControl
+#define SWIE_ICELL_ADDR SWIE_BASE_ADDRESS+0x80//SWIEInsertCell(0x80-0xb4)
+#define SWIE_ECELL_ADDR SWIE_BASE_ADDRESS+0xc0//SWIEExtractCell(0xc0-0xf4)
+
+#define SWIE_ISTAT_DONE 0x1
+#define SWIE_ESTAT_DONE 0x1
+#define SWIE_ICMD_START 0x00000001//Startcommandforinsertion
+#define SWIE_CBM_SCE0 CBM_HWEXCMD_SCE0//CBMcommandforSingle-Cell-Extract
+#define SWIE_CBM_PID_SUBADDR 0x00001000//CBMPortIDandSubAddressforUTOPIA
+
+//Extracted cell format
+//52bytes AAL0 PDU + "Input cell additional data"(14bits)
+#define SWIE_ADDITION_DATA_MASK 0x7fff
+#define SWIE_EPORT_MASK 0x7000//Source ID (000 AUB0, 001 AUB1)
+#define SWIE_EF4USER_MASK 0x800
+#define SWIE_EF5USER_MASK 0x400
+#define SWIE_EOAM_MASK 0x200
+#define SWIE_EAUU_MASK 0x100
+#define SWIE_EVCI3_MASK 0x80
+#define SWIE_EVCI4_MASK 0x40
+#define SWIE_EVCI6_MASK 0x20
+#define SWIE_EPTI4_MASK 0x10
+#define SWIE_EPTI5_MASK 0x8
+#define SWIE_EPTI6_MASK 0x4
+#define SWIE_EPTI7_MASK 0x2
+#define SWIE_ECRC10ERROR_MASK 0x1
+
+#define CBM_CELL_SIZE 0x40
+#define CBM_QD_SIZE 0x10
+#define AAL5R_TRAILER_LEN 12
+#define AAL5S_INBOUND_HEADER 8
+
+//constants
+//TODO: to be finalized by system guys
+//DMA QOS defined by ATM QoS Service type
+#define DMA_RX_CH0 0
+#define DMA_RX_CH1 1
+#define DMA_TX_CH0 0
+#define DMA_TX_CH1 1
+#define CBR_DMA_QOS CBM_QD_W3_QOS_0
+#define VBR_RT_DMA_QOS CBM_QD_W3_QOS_0
+#define VBR_NRT_DMA_QOS CBM_QD_W3_QOS_0
+#define UBR_PLUS_DMA_QOS CBM_QD_W3_QOS_0
+#define UBR_DMA_QOS CBM_QD_W3_QOS_0
+
+#define SRC_TOS_MIPS 0
+#define AAL5R_SRPN 0x00000006//a5rneedshigherprioritythanDR
+#define AAL5S_SRPN 0x00000005
+#define CBM_MIPS_SRPN 0x00000004
+#define QSB_SRPN 0x00000023
+#define HTU_SRPN1 0x00000022
+#define HTU_SRPN0 0x00000021
+
+#endif //ATM_DEFINES_H
+
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h
new file mode 100644
index 0000000..f863342
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h
@@ -0,0 +1,142 @@
+#ifndef AMAZON_ATM_MIB_H
+#define AMAZON_ATM_MIB_H
+
+#ifdef CONFIG_IFX_ATM_MIB
+#include <asm/types.h>
+#ifdef __KERNEL__
+#include <linux/list.h>
+#endif
+#endif /* CONFIG_IFX_ATM_MIB */
+
+#ifndef __KERNEL__
+#include <atmMIB/local_list.h>
+typedef unsigned int __u32;
+#endif
+
+typedef struct{
+ __u32 ifHCInOctets_h;
+ __u32 ifHCInOctets_l;
+ __u32 ifHCOutOctets_h;
+ __u32 ifHCOutOctets_l;
+ __u32 ifInErrors;
+ __u32 ifInUnknownProtos;
+ __u32 ifOutErrors;
+}atm_cell_ifEntry_t;
+
+typedef struct{
+ __u32 ifHCInOctets_h;
+ __u32 ifHCInOctets_l;
+ __u32 ifHCOutOctets_h;
+ __u32 ifHCOutOctets_l;
+ __u32 ifInUcastPkts;
+ __u32 ifOutUcastPkts;
+ __u32 ifInErrors;
+ __u32 ifInDiscards;
+ __u32 ifOutErros;
+ __u32 ifOutDiscards;
+}atm_aal5_ifEntry_t;
+
+typedef struct{
+ __u32 aal5VccCrcErrors;
+ __u32 aal5VccSarTimeOuts;//no timer support yet
+ __u32 aal5VccOverSizedSDUs;
+}atm_aal5_vcc_t;
+
+#if defined(CONFIG_IFX_ATM_MIB) || defined(IFX_CONFIG_SNMP_ATM_MIB)
+/* ATM-MIB data structures */
+typedef struct atmIfConfEntry {
+ int ifIndex;
+ int atmInterfaceMaxVpcs;
+ int atmInterfaceMaxVccs;
+ int atmInterfaceConfVpcs;
+ int atmInterfaceConfVccs;
+ int atmInterfaceMaxActiveVpiBits;
+ int atmInterfaceMaxActiveVciBits;
+ int atmInterfaceIlmiVpi;
+ int atmInterfaceIlmiVci;
+ int atmInterfaceAddressType;
+ char atmInterfaceAdminAddress[40];
+ unsigned long atmInterfaceMyNeighborIpAddress;
+ char atmInterfaceMyNeighborIfName[20];
+ int atmInterfaceCurrentMaxVpiBits;
+ int atmInterfaceCurrentMaxVciBits;
+ char atmInterfaceSubscrAddress[40];
+ int flags;
+}atmIfConfEntry;
+
+typedef struct atmTrafficDescParamEntry {
+ /* Following three parameters are used to update VCC QoS values */
+ int ifIndex;
+ short atmVclvpi;
+ int atmVclvci;
+
+ unsigned int atmTrafficParamIndex;
+ unsigned char traffic_class;
+ int max_pcr;
+ /* Subramani: Added min_pcr */
+ int min_pcr;
+ int cdv;
+ int scr;
+ int mbs;
+ int atmTrafficRowStatus;
+ int atmTrafficFrameDiscard;
+ struct list_head vpivci_head;
+ struct list_head list;
+}atmTrafficDescParamEntry;
+
+
+typedef struct atmVclEntry {
+ int ifIndex;
+ short atmVclvpi;
+ int atmVclvci;
+ char vpivci[20];
+ int atmVclAdminStatus;
+ int atmVclOperStatus;
+ unsigned long atmVclLastChange;
+ struct atmTrafficDescParamEntry *atmVclRxTrafficPtr;
+ struct atmTrafficDescParamEntry *atmVclTxTrafficPtr;
+ unsigned char atmVccAalType;
+ unsigned int atmVccAal5TxSduSize;
+ unsigned int atmVccAal5RxSduSize;
+ int atmVccAal5Encap;
+ int atmVclRowStatus;
+ int atmVclCastType;
+ int atmVclConnKind;
+ struct list_head list;
+ int flags;
+}atmVclEntry;
+
+
+typedef union union_atmptrs {
+ struct atmIfConfEntry *atmIfConfEntry_ptr;
+ struct atmTrafficDescParamEntry *atmTrafficDescParamEntry_ptr;
+ struct atmVclEntry *atmVclEntry_ptr;
+}union_atmptrs;
+
+/* ATM Character device major number */
+#define ATM_MEI_MAJOR 107
+
+/* Protocol Constants */
+#define IFX_PROTO_RAW 0
+#define IFX_PROTO_BR2684 1
+#define IFX_PROTO_PPPOATM 2
+#define IFX_PROTO_CLIP 3
+
+/* IOCTL Command Set for ATM-MIB */
+#define GET_ATM_IF_CONF_DATA 0x0AB0
+#define SET_ATM_IF_CONF_DATA 0x0AB1
+
+#define SET_ATM_QOS_DATA 0x0BC0
+
+#define GET_ATM_VCL_DATA 0x0CD0
+#define SET_ATM_VCL_DATA 0x0CD1
+
+#define FIND_VCC_IN_KERNEL 0x0DE0
+
+/* User defined flags for VCL Table */
+#define ATMVCCAAL5CPCSTRANSMITSDUSIZE 9
+#define ATMVCCAAL5CPCSRECEIVESDUSIZE 10
+
+#endif /* CONFIG_IFX_ATM_MIB || IFX_CONFIG_SNMP_ATM_MIB */
+
+#endif //AMAZON_ATM_MIB_H
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h
new file mode 100644
index 0000000..65f14e4
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h
@@ -0,0 +1,96 @@
+//*************************************************************************
+//* Summary of definitions which are used in each peripheral *
+//*************************************************************************
+
+#ifndef peripheral_definitions_h
+#define peripheral_definitions_h
+
+typedef unsigned char UINT8;
+typedef signed char INT8;
+typedef unsigned short UINT16;
+typedef signed short INT16;
+typedef unsigned int UINT32;
+typedef signed int INT32;
+typedef unsigned long long UINT64;
+typedef signed long long INT64;
+
+#define REG8( addr ) (*(volatile UINT8 *) (addr))
+#define REG16( addr ) (*(volatile UINT16 *)(addr))
+#define REG32( addr ) (*(volatile UINT32 *)(addr))
+#define REG64( addr ) (*(volatile UINT64 *)(addr))
+
+/* define routine to set FPI access in Supervisor Mode */
+#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG)
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm
+/* enable all Interrupts in IIU */
+//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask
+///* get all high priority interrupt bits in IIU */
+//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED)
+///* signal ends of interrupt to IIU */
+//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit
+///* force IIU interrupt register */
+//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data
+///* get all bits of interrupt register */
+//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR)
+/* insert a NOP instruction */
+#define NOP _nop()
+/* CPU goes to power down mode until interrupt occurs */
+#define IFX_CPU_SLEEP _sleep()
+/* enable all interrupts to CPU */
+#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int()
+/* get all low priority interrupt bits in peripheral */
+#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg)
+/* clear low priority interrupt bit in peripheral */
+#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit
+/* write FPI bus */
+#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data
+#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data
+#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data
+/* read FPI bus */
+#define READ_FPI_BYTE(addr) REG8(addr)
+#define READ_FPI_16BIT(addr) REG16(addr)
+#define READ_FPI_32BIT(addr) REG32(addr)
+/* write peripheral register */
+#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
+#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
+#else //not CONFIG_CPU_LITTLE_ENDIAN
+#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
+#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
+#endif //CONFIG_CPU_LITTLE_ENDIAN
+
+/* read peripheral register */
+#define READ_PERIPHERAL_REGISTER(addr) REG32(addr)
+
+/* read/modify(or)/write peripheral register */
+#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
+/* read/modify(and)/write peripheral register */
+#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data
+
+/* CPU-independent mnemonic constants */
+/* CLC register bits */
+#define IFX_CLC_ENABLE 0x00000000
+#define IFX_CLC_DISABLE 0x00000001
+#define IFX_CLC_DISABLE_STATUS 0x00000002
+#define IFX_CLC_SUSPEND_ENABLE 0x00000004
+#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008
+#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010
+#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
+#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00
+#define IFX_CLC_RUN_DIVIDER_OFFSET 8
+#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000
+#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16
+#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
+#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
+
+/* number of cycles to wait for interrupt service routine to be called */
+#define WAIT_CYCLES 50
+
+#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h
new file mode 100644
index 0000000..e5d73ad
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h
@@ -0,0 +1,263 @@
+/*
+ * ifx_ssc.h defines some data sructures used in ifx_ssc.c
+ *
+ * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
+ *
+ *
+ */
+
+#ifndef __IFX_SSC_H
+#define __IFX_SSC_H
+#ifdef __KERNEL__
+#include <asm/amazon/ifx_ssc_defines.h>
+#endif //__KERNEL__
+
+#define PORT_CNT 1 // assume default value
+
+/* symbolic constants to be used in SSC routines */
+
+// ### TO DO: bad performance
+#define IFX_SSC_TXFIFO_ITL 1
+#define IFX_SSC_RXFIFO_ITL 1
+
+
+
+struct ifx_ssc_statistics{
+ unsigned int abortErr; /* abort error */
+ unsigned int modeErr; /* master/slave mode error */
+ unsigned int txOvErr; /* TX Overflow error */
+ unsigned int txUnErr; /* TX Underrun error */
+ unsigned int rxOvErr; /* RX Overflow error */
+ unsigned int rxUnErr; /* RX Underrun error */
+ unsigned int rxBytes;
+ unsigned int txBytes;
+};
+
+
+struct ifx_ssc_hwopts {
+ unsigned int AbortErrDetect :1; /* Abort Error detection (in slave mode) */
+ unsigned int rxOvErrDetect :1; /* Receive Overflow Error detection */
+ unsigned int rxUndErrDetect :1; /* Receive Underflow Error detection */
+ unsigned int txOvErrDetect :1; /* Transmit Overflow Error detection */
+ unsigned int txUndErrDetect :1; /* Transmit Underflow Error detection */
+ unsigned int echoMode :1; /* Echo mode */
+ unsigned int loopBack :1; /* Loopback mode */
+ unsigned int idleValue :1; /* Idle value */
+ unsigned int clockPolarity :1; /* Idle clock is high or low */
+ unsigned int clockPhase :1; /* Tx on trailing or leading edge*/
+ unsigned int headingControl :1; /* LSB first or MSB first */
+ unsigned int dataWidth :6; /* from 2 up to 32 bits */
+ unsigned int masterSelect :1; /* Master or Slave mode */
+ unsigned int modeRxTx :2; /* rx/tx mode */
+ unsigned int gpoCs :8; /* choose outputs to use for chip select */
+ unsigned int gpoInv :8; /* invert GPO outputs */
+};
+
+
+struct ifx_ssc_frm_opts {
+ bool FrameEnable; // SFCON.SFEN
+ unsigned int DataLength; // SFCON.DLEN
+ unsigned int PauseLength; // SFCON.PLEN
+ unsigned int IdleData; // SFCON.IDAT
+ unsigned int IdleClock; // SFCON.ICLK
+ bool StopAfterPause; // SFCON.STOP
+};
+
+struct ifx_ssc_frm_status {
+ bool DataBusy; // SFSTAT.DBSY
+ bool PauseBusy; // SFSTAT.PBSY
+ unsigned int DataCount; // SFSTAT.DCNT
+ unsigned int PauseCount; // SFSTAT.PCNT
+ bool EnIntAfterData; // SFCON.IBEN
+ bool EnIntAfterPause;// SFCON.IAEN
+};
+
+typedef struct {
+ char *buf;
+ size_t len;
+} ifx_ssc_buf_item_t;
+
+
+// data structures for batch execution
+typedef union {
+ struct {
+ bool save_options;
+ } init;
+ ifx_ssc_buf_item_t read;
+ ifx_ssc_buf_item_t write;
+ ifx_ssc_buf_item_t rd_wr;
+ unsigned int set_baudrate;
+ struct ifx_ssc_frm_opts set_frm;
+ unsigned int set_gpo;
+ struct ifx_ssc_hwopts set_hwopts;
+}ifx_ssc_batch_cmd_param;
+
+struct ifx_ssc_batch_list {
+ unsigned int cmd;
+ ifx_ssc_batch_cmd_param cmd_param;
+ struct ifx_ssc_batch_list *next;
+};
+
+#ifdef __KERNEL__
+#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
+
+
+struct ifx_ssc_port{
+ unsigned long mapbase;
+ struct ifx_ssc_hwopts opts;
+ struct ifx_ssc_statistics stats;
+ struct ifx_ssc_frm_status frm_status;
+ struct ifx_ssc_frm_opts frm_opts;
+ /* wait queue for ifx_ssc_read() */
+ wait_queue_head_t rwait, pwait;
+ int port_nr;
+ char port_is_open; /* exclusive open - boolean */
+// int no_of_bits; /* number of _valid_ bits */
+// int elem_size; /* shift for element (no of bytes)*/
+ /* buffer and pointers to the read/write position */
+ char *rxbuf; /* buffer for RX */
+ char *rxbuf_end; /* buffer end pointer for RX */
+ volatile char *rxbuf_ptr; /* buffer write pointer for RX */
+ char *txbuf; /* buffer for TX */
+ char *txbuf_end; /* buffer end pointer for TX */
+ volatile char *txbuf_ptr; /* buffer read pointer for TX */
+ unsigned int baud;
+ /* each channel has its own interrupts */
+ /* (transmit/receive/error/frame) */
+ unsigned int txirq, rxirq, errirq, frmirq;
+};
+/* default values for SSC configuration */
+// values of CON
+#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */
+#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */
+#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */
+#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */
+#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */
+#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */
+#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */
+#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
+#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
+#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX
+// other values
+#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */
+#define IFX_SSC_DEF_BAUDRATE 1000000
+#define IFX_SSC_DEF_RMC 0x10
+
+#define IFX_SSC_DEF_TXFIFO_FL 8
+#define IFX_SSC_DEF_RXFIFO_FL 1
+
+#if 1 //TODO
+#define IFX_SSC_DEF_GPO_CS 2 /* no chip select */
+#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */
+#else
+#error "what is ur Chip Select???"
+#endif
+#define IFX_SSC_DEF_SFCON 0 /* no serial framing */
+#if 0
+#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
+ IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
+#endif
+#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
+ IFX_SSC_R_BIT | IFX_SSC_E_BIT
+#endif /* __KERNEL__ */
+
+// batch execution commands
+#define IFX_SSC_BATCH_CMD_INIT 1
+#define IFX_SSC_BATCH_CMD_READ 2
+#define IFX_SSC_BATCH_CMD_WRITE 3
+#define IFX_SSC_BATCH_CMD_RD_WR 4
+#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
+#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6
+#define IFX_SSC_BATCH_CMD_SET_FRM 7
+#define IFX_SSC_BATCH_CMD_SET_GPO 8
+#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9
+//#define IFX_SSC_BATCH_CMD_
+//#define IFX_SSC_BATCH_CMD_
+#define IFX_SSC_BATCH_CMD_END_EXEC 0
+
+/* Macros to configure SSC hardware */
+/* headingControl: */
+#define IFX_SSC_LSB_FIRST 0
+#define IFX_SSC_MSB_FIRST 1
+/* dataWidth: */
+#define IFX_SSC_MIN_DATA_WIDTH 2
+#define IFX_SSC_MAX_DATA_WIDTH 32
+/* master/slave mode select */
+#define IFX_SSC_MASTER_MODE 1
+#define IFX_SSC_SLAVE_MODE 0
+/* rx/tx mode */
+// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
+#define IFX_SSC_MODE_RXTX 0
+#define IFX_SSC_MODE_RX 1
+#define IFX_SSC_MODE_TX 2
+#define IFX_SSC_MODE_OFF 3
+#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
+
+/* GPO values */
+#define IFX_SSC_MAX_GPO_OUT 7
+
+#define IFX_SSC_RXREQ_BLOCK_SIZE 32768
+
+/***********************/
+/* defines for ioctl's */
+/***********************/
+#define IFX_SSC_IOCTL_MAGIC 'S'
+/* read out the statistics */
+#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
+/* clear the statistics */
+#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
+/* set the baudrate */
+#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
+/* get the current baudrate */
+#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
+/* set hardware options */
+#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
+/* get the current hardware options */
+#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
+/* set transmission mode */
+#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
+/* get the current transmission mode */
+#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
+/* abort transmission */
+#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
+#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
+
+/* set general purpose outputs */
+#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
+/* clear general purpose outputs */
+#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
+/* get general purpose outputs */
+#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
+
+/*** serial framing ***/
+/* get status of serial framing */
+#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
+/* get counter reload values and control bits */
+#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
+/* set counter reload values and control bits */
+#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
+
+
+/*** batch execution ***/
+/* do batch execution */
+#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
+
+
+#ifdef __KERNEL__
+// routines from ifx_ssc.c
+// ### TO DO
+/* kernel interface for read and write */
+ssize_t ifx_ssc_kread(int, char *, size_t);
+ssize_t ifx_ssc_kwrite(int, const char *, size_t);
+
+#ifdef CONFIG_IFX_VP_KERNEL_TEST
+void ifx_ssc_tc(void);
+#endif // CONFIG_IFX_VP_KERNEL_TEST
+
+#endif //__KERNEL__
+#endif // __IFX_SSC_H
+
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h
new file mode 100644
index 0000000..46157dc
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h
@@ -0,0 +1,552 @@
+#ifndef IFX_SSC_DEFINES_H
+#define IFX_SSC_DEFINES_H
+
+#include "ifx_peripheral_definitions.h"
+
+/* maximum SSC FIFO size */
+#define IFX_SSC_MAX_FIFO_SIZE 32
+
+/* register map of SSC */
+
+/* address of the Clock Control Register of the SSC */
+#define IFX_SSC_CLC 0x00000000
+/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0
+ bit 1 is hardware modified*/
+#define IFX_SSC_CLC_readmask 0x00FFFFEF
+#define IFX_SSC_CLC_writemask 0x00FFFF3D
+#define IFX_SSC_CLC_hwmask 0x00000002
+#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
+
+/* address of Port Input Select Register of the SSC */
+#define IFX_SSC_PISEL 0x00000004
+/* IFX_SSC_PISEL register is significant in lowest three bits only */
+#define IFX_SSC_PISEL_readmask 0x00000007
+#define IFX_SSC_PISEL_writemask 0x00000007
+#define IFX_SSC_PISEL_hwmask 0x00000000
+#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
+
+/* address of Identification Register of the SSC */
+#define IFX_SSC_ID 0x00000008
+/* IFX_SSC_ID register is significant in no bit */
+#define IFX_SSC_ID_readmask 0x0000FF3F
+#define IFX_SSC_ID_writemask 0x00000000
+#define IFX_SSC_ID_hwmask 0x00000000
+#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
+
+/* address of the Control Register of the SSC */
+#define IFX_SSC_CON 0x00000010
+/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
+#define IFX_SSC_CON_readmask 0x01DF1FFF
+#define IFX_SSC_CON_writemask 0x01DF1FFF
+#define IFX_SSC_CON_hwmask 0x00000000
+#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
+
+
+/* address of the Status Register of the SSC */
+#define IFX_SSC_STATE 0x00000014
+/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
+ all bits except 1:0 are hardware modified */
+#define IFX_SSC_STATE_readmask 0x771F3F87
+#define IFX_SSC_STATE_writemask 0x00000000
+#define IFX_SSC_STATE_hwmask 0x771F3F84
+#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
+
+/* address of the Write Hardware Modified Control Register Bits of the SSC */
+#define IFX_SSC_WHBSTATE 0x00000018
+/* IFX_SSC_WHBSTATE register is write only */
+#define IFX_SSC_WHBSTATE_readmask 0x00000000
+#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
+#define IFX_SSC_WHBSTATE_hwmask 0x00000000
+#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
+
+/* address of the Baudrate Timer Reload Register of the SSC */
+#define IFX_SSC_BR 0x00000040
+/* IFX_SSC_BR register is significant in bit 15 downto 0*/
+#define IFX_SSC_BR_readmask 0x0000FFFF
+#define IFX_SSC_BR_writemask 0x0000FFFF
+#define IFX_SSC_BR_hwmask 0x00000000
+#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
+
+/* address of the Baudrate Timer Status Register of the SSC */
+#define IFX_SSC_BRSTAT 0x00000044
+/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/
+#define IFX_SSC_BRSTAT_readmask 0x0000FFFF
+#define IFX_SSC_BRSTAT_writemask 0x00000000
+#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF
+#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
+
+/* address of the Transmitter Buffer Register of the SSC */
+#define IFX_SSC_TB 0x00000020
+/* IFX_SSC_TB register is significant in bit 31 downto 0*/
+#define IFX_SSC_TB_readmask 0xFFFFFFFF
+#define IFX_SSC_TB_writemask 0xFFFFFFFF
+#define IFX_SSC_TB_hwmask 0x00000000
+#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
+
+/* address of the Reciver Buffer Register of the SSC */
+#define IFX_SSC_RB 0x00000024
+/* IFX_SSC_RB register is significant in no bits*/
+#define IFX_SSC_RB_readmask 0xFFFFFFFF
+#define IFX_SSC_RB_writemask 0x00000000
+#define IFX_SSC_RB_hwmask 0xFFFFFFFF
+#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
+
+/* address of the Receive FIFO Control Register of the SSC */
+#define IFX_SSC_RXFCON 0x00000030
+/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
+#define IFX_SSC_RXFCON_readmask 0x00003F03
+#define IFX_SSC_RXFCON_writemask 0x00003F03
+#define IFX_SSC_RXFCON_hwmask 0x00000000
+#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
+
+/* address of the Transmit FIFO Control Register of the SSC */
+#define IFX_SSC_TXFCON 0x00000034
+/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
+#define IFX_SSC_TXFCON_readmask 0x00003F03
+#define IFX_SSC_TXFCON_writemask 0x00003F03
+#define IFX_SSC_TXFCON_hwmask 0x00000000
+#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
+
+/* address of the FIFO Status Register of the SSC */
+#define IFX_SSC_FSTAT 0x00000038
+/* IFX_SSC_FSTAT register is significant in no bit*/
+#define IFX_SSC_FSTAT_readmask 0x00003F3F
+#define IFX_SSC_FSTAT_writemask 0x00000000
+#define IFX_SSC_FSTAT_hwmask 0x00003F3F
+#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
+
+/* address of the Data Frame Control register of the SSC */
+#define IFX_SSC_SFCON 0x00000060
+#define IFX_SSC_SFCON_readmask 0xFFDFFFFD
+#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
+#define IFX_SSC_SFCON_hwmask 0x00000000
+#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
+
+/* address of the Data Frame Status register of the SSC */
+#define IFX_SSC_SFSTAT 0x00000064
+#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3
+#define IFX_SSC_SFSTAT_writemask 0x00000000
+#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3
+#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
+
+/* address of the General Purpose Output Control register of the SSC */
+#define IFX_SSC_GPOCON 0x00000070
+#define IFX_SSC_GPOCON_readmask 0x0000FFFF
+#define IFX_SSC_GPOCON_writemask 0x0000FFFF
+#define IFX_SSC_GPOCON_hwmask 0x00000000
+#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
+
+/* address of the General Purpose Output Status register of the SSC */
+#define IFX_SSC_GPOSTAT 0x00000074
+#define IFX_SSC_GPOSTAT_readmask 0x000000FF
+#define IFX_SSC_GPOSTAT_writemask 0x00000000
+#define IFX_SSC_GPOSTAT_hwmask 0x00000000
+#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
+
+/* address of the Force GPO Status register of the SSC */
+#define IFX_SSC_WHBGPOSTAT 0x00000078
+#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000
+#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
+#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000
+#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
+
+/* address of the Receive Request Register of the SSC */
+#define IFX_SSC_RXREQ 0x00000080
+#define IFX_SSC_RXREQ_readmask 0x0000FFFF
+#define IFX_SSC_RXREQ_writemask 0x0000FFFF
+#define IFX_SSC_RXREQ_hwmask 0x00000000
+#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
+
+/* address of the Receive Count Register of the SSC */
+#define IFX_SSC_RXCNT 0x00000084
+#define IFX_SSC_RXCNT_readmask 0x0000FFFF
+#define IFX_SSC_RXCNT_writemask 0x00000000
+#define IFX_SSC_RXCNT_hwmask 0x0000FFFF
+#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
+
+/* address of the DMA Configuration Register of the SSC */
+#define IFX_SSC_DMACON 0x000000EC
+#define IFX_SSC_DMACON_readmask 0x0000FFFF
+#define IFX_SSC_DMACON_writemask 0x00000000
+#define IFX_SSC_DMACON_hwmask 0x0000FFFF
+#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
+
+//------------------------------------------------------
+// interrupt register for enabling interrupts, mask register of irq_reg
+#define IFX_SSC_IRN_EN 0xF4
+// read/write
+#define IFX_SSC_IRN_EN_readmask 0x0000000F
+#define IFX_SSC_IRN_EN_writemask 0x0000000F
+#define IFX_SSC_IRN_EN_hwmask 0x00000000
+#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
+
+// interrupt register for accessing interrupts
+#define IFX_SSC_IRN_CR 0xF8
+// read/write
+#define IFX_SSC_IRN_CR_readmask 0x0000000F
+#define IFX_SSC_IRN_CR_writemask 0x0000000F
+#define IFX_SSC_IRN_CR_hwmask 0x0000000F
+#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
+
+// interrupt register for stimulating interrupts
+#define IFX_SSC_IRN_ICR 0xFC
+// read/write
+#define IFX_SSC_IRN_ICR_readmask 0x0000000F
+#define IFX_SSC_IRN_ICR_writemask 0x0000000F
+#define IFX_SSC_IRN_ICR_hwmask 0x00000000
+#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
+
+//---------------------------------------------------------------------
+// Number of IRQs and bitposition of IRQ
+#define IFX_SSC_NUM_IRQ 4
+#define IFX_SSC_T_BIT 0x00000001
+#define IFX_SSC_R_BIT 0x00000002
+#define IFX_SSC_E_BIT 0x00000004
+#define IFX_SSC_F_BIT 0x00000008
+
+/* bit masks for SSC registers */
+
+/* ID register */
+#define IFX_SSC_PERID_REV_MASK 0x0000001F
+#define IFX_SSC_PERID_CFG_MASK 0x00000020
+#define IFX_SSC_PERID_ID_MASK 0x0000FF00
+#define IFX_SSC_PERID_REV_OFFSET 0
+#define IFX_SSC_PERID_CFG_OFFSET 5
+#define IFX_SSC_PERID_ID_OFFSET 8
+#define IFX_SSC_PERID_ID 0x45
+#define IFX_SSC_PERID_DMA_ON 0x00000020
+#define IFX_SSC_PERID_RXFS_MASK 0x003F0000
+#define IFX_SSC_PERID_RXFS_OFFSET 16
+#define IFX_SSC_PERID_TXFS_MASK 0x3F000000
+#define IFX_SSC_PERID_TXFS_OFFSET 24
+
+/* PISEL register */
+#define IFX_SSC_PISEL_MASTER_IN_A 0x0000
+#define IFX_SSC_PISEL_MASTER_IN_B 0x0001
+#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000
+#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002
+#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000
+#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004
+
+
+/* IFX_SSC_CON register */
+#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000
+#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000
+#define IFX_SSC_CON_IDLE_HIGH 0x00800000
+#define IFX_SSC_CON_IDLE_LOW 0x00000000
+#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000
+#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
+#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16
+#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000
+#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
+
+#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000
+#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000
+
+#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000
+#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000
+#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800
+#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000
+#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400
+#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000
+#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200
+#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000
+#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100
+#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000
+#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00
+#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000
+
+#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080
+#define IFX_SSC_CON_NO_LOOPBACK 0x00000000
+#define IFX_SSC_CON_HALF_DUPLEX 0x00000080
+#define IFX_SSC_CON_FULL_DUPLEX 0x00000000
+#define IFX_SSC_CON_CLOCK_FALL 0x00000040
+#define IFX_SSC_CON_CLOCK_RISE 0x00000000
+#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000
+#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020
+#define IFX_SSC_CON_MSB_FIRST 0x00000010
+#define IFX_SSC_CON_LSB_FIRST 0x00000000
+#define IFX_SSC_CON_ENABLE_CSB 0x00000008
+#define IFX_SSC_CON_DISABLE_CSB 0x00000000
+#define IFX_SSC_CON_INVERT_CSB 0x00000004
+#define IFX_SSC_CON_TRUE_CSB 0x00000000
+#define IFX_SSC_CON_RX_OFF 0x00000002
+#define IFX_SSC_CON_RX_ON 0x00000000
+#define IFX_SSC_CON_TX_OFF 0x00000001
+#define IFX_SSC_CON_TX_ON 0x00000000
+
+
+/* IFX_SSC_STATE register */
+#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
+#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000
+#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
+#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
+#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000
+#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
+#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16
+#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000
+#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
+#define IFX_SSC_STATE_BUSY 0x00002000
+#define IFX_SSC_STATE_RX_UFL 0x00001000
+#define IFX_SSC_STATE_TX_UFL 0x00000800
+#define IFX_SSC_STATE_ABORT_ERR 0x00000400
+#define IFX_SSC_STATE_RX_OFL 0x00000200
+#define IFX_SSC_STATE_TX_OFL 0x00000100
+#define IFX_SSC_STATE_MODE_ERR 0x00000080
+#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004
+#define IFX_SSC_STATE_IS_MASTER 0x00000002
+#define IFX_SSC_STATE_IS_ENABLED 0x00000001
+
+/* WHBSTATE register */
+#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001
+#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
+#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001
+
+#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002
+#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002
+#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002
+
+#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004
+#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004
+
+#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008
+#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008
+
+#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010
+#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020
+
+#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040
+#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080
+
+#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100
+#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200
+#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400
+#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800
+#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000
+#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000
+#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000
+#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000
+#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50
+#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0
+
+/* BR register */
+#define IFX_SSC_BR_BAUDRATE_OFFSET 0
+#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF
+
+/* BR_STAT register */
+#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0
+#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF
+
+/* TB register */
+#define IFX_SSC_TB_DATA_OFFSET 0
+#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF
+
+/* RB register */
+#define IFX_SSC_RB_DATA_OFFSET 0
+#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF
+
+
+/* RXFCON and TXFCON registers */
+#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000
+#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001
+#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002
+#define IFX_SSC_XFCON_ITL_MASK 0x00003F00
+#define IFX_SSC_XFCON_ITL_OFFSET 8
+
+/* FSTAT register */
+#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0
+#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F
+#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8
+#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00
+
+/* GPOCON register */
+#define IFX_SSC_GPOCON_INVOUT0_POS 0
+#define IFX_SSC_GPOCON_INV_OUT0 0x00000001
+#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000
+#define IFX_SSC_GPOCON_INVOUT1_POS 1
+#define IFX_SSC_GPOCON_INV_OUT1 0x00000002
+#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000
+#define IFX_SSC_GPOCON_INVOUT2_POS 2
+#define IFX_SSC_GPOCON_INV_OUT2 0x00000003
+#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000
+#define IFX_SSC_GPOCON_INVOUT3_POS 3
+#define IFX_SSC_GPOCON_INV_OUT3 0x00000008
+#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000
+#define IFX_SSC_GPOCON_INVOUT4_POS 4
+#define IFX_SSC_GPOCON_INV_OUT4 0x00000010
+#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000
+#define IFX_SSC_GPOCON_INVOUT5_POS 5
+#define IFX_SSC_GPOCON_INV_OUT5 0x00000020
+#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000
+#define IFX_SSC_GPOCON_INVOUT6_POS 6
+#define IFX_SSC_GPOCON_INV_OUT6 0x00000040
+#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000
+#define IFX_SSC_GPOCON_INVOUT7_POS 7
+#define IFX_SSC_GPOCON_INV_OUT7 0x00000080
+#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000
+#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF
+#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000
+
+#define IFX_SSC_GPOCON_ISCSB0_POS 8
+#define IFX_SSC_GPOCON_IS_CSB0 0x00000100
+#define IFX_SSC_GPOCON_IS_GPO0 0x00000000
+#define IFX_SSC_GPOCON_ISCSB1_POS 9
+#define IFX_SSC_GPOCON_IS_CSB1 0x00000200
+#define IFX_SSC_GPOCON_IS_GPO1 0x00000000
+#define IFX_SSC_GPOCON_ISCSB2_POS 10
+#define IFX_SSC_GPOCON_IS_CSB2 0x00000400
+#define IFX_SSC_GPOCON_IS_GPO2 0x00000000
+#define IFX_SSC_GPOCON_ISCSB3_POS 11
+#define IFX_SSC_GPOCON_IS_CSB3 0x00000800
+#define IFX_SSC_GPOCON_IS_GPO3 0x00000000
+#define IFX_SSC_GPOCON_ISCSB4_POS 12
+#define IFX_SSC_GPOCON_IS_CSB4 0x00001000
+#define IFX_SSC_GPOCON_IS_GPO4 0x00000000
+#define IFX_SSC_GPOCON_ISCSB5_POS 13
+#define IFX_SSC_GPOCON_IS_CSB5 0x00002000
+#define IFX_SSC_GPOCON_IS_GPO5 0x00000000
+#define IFX_SSC_GPOCON_ISCSB6_POS 14
+#define IFX_SSC_GPOCON_IS_CSB6 0x00004000
+#define IFX_SSC_GPOCON_IS_GPO6 0x00000000
+#define IFX_SSC_GPOCON_ISCSB7_POS 15
+#define IFX_SSC_GPOCON_IS_CSB7 0x00008000
+#define IFX_SSC_GPOCON_IS_GPO7 0x00000000
+#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00
+#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000
+
+/* GPOSTAT register */
+#define IFX_SSC_GPOSTAT_OUT0 0x00000001
+#define IFX_SSC_GPOSTAT_OUT1 0x00000002
+#define IFX_SSC_GPOSTAT_OUT2 0x00000004
+#define IFX_SSC_GPOSTAT_OUT3 0x00000008
+#define IFX_SSC_GPOSTAT_OUT4 0x00000010
+#define IFX_SSC_GPOSTAT_OUT5 0x00000020
+#define IFX_SSC_GPOSTAT_OUT6 0x00000040
+#define IFX_SSC_GPOSTAT_OUT7 0x00000080
+#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF
+
+/* WHBGPOSTAT register */
+#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001
+#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002
+#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004
+#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008
+#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010
+#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020
+#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040
+#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF
+
+#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0
+#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1
+#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2
+#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3
+#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4
+#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5
+#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6
+#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7
+
+
+#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8
+#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100
+#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9
+#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200
+#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10
+#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400
+#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11
+#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800
+#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12
+#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000
+#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13
+#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000
+#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14
+#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000
+#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15
+#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000
+#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00
+
+/* SFCON register */
+#define IFX_SSC_SFCON_SF_ENABLE 0x00000001
+#define IFX_SSC_SFCON_SF_DISABLE 0x00000000
+#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004
+#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
+#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008
+#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000
+#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0
+#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4
+#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000
+#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16
+#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000
+#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000
+#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18
+#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000
+#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000
+#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000
+#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000
+#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22
+#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096
+#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024
+
+#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
+#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
+#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
+#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
+
+/* SFSTAT register */
+#define IFX_SSC_SFSTAT_IN_DATA 0x00000001
+#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002
+#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0
+#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4
+#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000
+#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
+
+#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
+#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
+
+/* RXREQ register */
+#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF
+#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0
+
+/* RXCNT register */
+#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF
+#define IFX_SSC_RXCNT_TODO_OFFSET 0
+
+/* DMACON register */
+#define IFX_SSC_DMACON_RXON 0x00000001
+#define IFX_SSC_DMACON_RXOFF 0x00000000
+#define IFX_SSC_DMACON_TXON 0x00000002
+#define IFX_SSC_DMACON_TXOFF 0x00000000
+#define IFX_SSC_DMACON_DMAON 0x00000003
+#define IFX_SSC_DMACON_DMAOFF 0x00000000
+#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C
+#define IFX_SSC_DMACON_CLASS_OFFSET 2
+
+/* register access macros */
+#define ifx_ssc_fstat_received_words(status) (status & 0x003F)
+#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
+
+#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
+#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
+#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
+#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
+#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
+#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
+#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
+#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
+
+#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
+#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
+
+#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/irq.h b/target/linux/amazon/files/include/asm-mips/amazon/irq.h
new file mode 100644
index 0000000..c575dd6
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/irq.h
@@ -0,0 +1,200 @@
+/* irq.h - AMAZON interrupts */
+
+#ifndef __AMAZON_IRQ
+#define __AMAZON_IRQ
+
+/************************************************************************
+ * Interrupt information
+*************************************************************************/
+
+/* these vectors are to handle the interrupts from the internal AMAZON
+ interrupt controller. THe INT_NUM values are really just indices into
+ an array and are set up so that we can use the INT_NUM as a shift
+ to calculate a mask value. */
+#define INT_NUM_IRQ0 8
+#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM0_IRL1 (INT_NUM_IRQ0 + 1)
+#define INT_NUM_IM0_IRL2 (INT_NUM_IRQ0 + 2)
+#define INT_NUM_IM0_IRL3 (INT_NUM_IRQ0 + 3)
+#define INT_NUM_IM0_IRL4 (INT_NUM_IRQ0 + 4)
+#define INT_NUM_IM0_IRL5 (INT_NUM_IRQ0 + 5)
+#define INT_NUM_IM0_IRL6 (INT_NUM_IRQ0 + 6)
+#define INT_NUM_IM0_IRL7 (INT_NUM_IRQ0 + 7)
+#define INT_NUM_IM0_IRL8 (INT_NUM_IRQ0 + 8)
+#define INT_NUM_IM0_IRL9 (INT_NUM_IRQ0 + 9)
+#define INT_NUM_IM0_IRL10 (INT_NUM_IRQ0 + 10)
+#define INT_NUM_IM0_IRL11 (INT_NUM_IRQ0 + 11)
+#define INT_NUM_IM0_IRL12 (INT_NUM_IRQ0 + 12)
+#define INT_NUM_IM0_IRL13 (INT_NUM_IRQ0 + 13)
+#define INT_NUM_IM0_IRL14 (INT_NUM_IRQ0 + 14)
+#define INT_NUM_IM0_IRL15 (INT_NUM_IRQ0 + 15)
+#define INT_NUM_IM0_IRL16 (INT_NUM_IRQ0 + 16)
+#define INT_NUM_IM0_IRL17 (INT_NUM_IRQ0 + 17)
+#define INT_NUM_IM0_IRL18 (INT_NUM_IRQ0 + 18)
+#define INT_NUM_IM0_IRL19 (INT_NUM_IRQ0 + 19)
+#define INT_NUM_IM0_IRL20 (INT_NUM_IRQ0 + 20)
+#define INT_NUM_IM0_IRL21 (INT_NUM_IRQ0 + 21)
+#define INT_NUM_IM0_IRL22 (INT_NUM_IRQ0 + 22)
+#define INT_NUM_IM0_IRL23 (INT_NUM_IRQ0 + 23)
+#define INT_NUM_IM0_IRL24 (INT_NUM_IRQ0 + 24)
+#define INT_NUM_IM0_IRL25 (INT_NUM_IRQ0 + 25)
+#define INT_NUM_IM0_IRL26 (INT_NUM_IRQ0 + 26)
+#define INT_NUM_IM0_IRL27 (INT_NUM_IRQ0 + 27)
+#define INT_NUM_IM0_IRL28 (INT_NUM_IRQ0 + 28)
+#define INT_NUM_IM0_IRL29 (INT_NUM_IRQ0 + 29)
+#define INT_NUM_IM0_IRL30 (INT_NUM_IRQ0 + 30)
+#define INT_NUM_IM0_IRL31 (INT_NUM_IRQ0 + 31)
+
+#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM1_IRL1 (INT_NUM_IM1_IRL0 + 1)
+#define INT_NUM_IM1_IRL2 (INT_NUM_IM1_IRL0 + 2)
+#define INT_NUM_IM1_IRL3 (INT_NUM_IM1_IRL0 + 3)
+#define INT_NUM_IM1_IRL4 (INT_NUM_IM1_IRL0 + 4)
+#define INT_NUM_IM1_IRL5 (INT_NUM_IM1_IRL0 + 5)
+#define INT_NUM_IM1_IRL6 (INT_NUM_IM1_IRL0 + 6)
+#define INT_NUM_IM1_IRL7 (INT_NUM_IM1_IRL0 + 7)
+#define INT_NUM_IM1_IRL8 (INT_NUM_IM1_IRL0 + 8)
+#define INT_NUM_IM1_IRL9 (INT_NUM_IM1_IRL0 + 9)
+#define INT_NUM_IM1_IRL10 (INT_NUM_IM1_IRL0 + 10)
+#define INT_NUM_IM1_IRL11 (INT_NUM_IM1_IRL0 + 11)
+#define INT_NUM_IM1_IRL12 (INT_NUM_IM1_IRL0 + 12)
+#define INT_NUM_IM1_IRL13 (INT_NUM_IM1_IRL0 + 13)
+#define INT_NUM_IM1_IRL14 (INT_NUM_IM1_IRL0 + 14)
+#define INT_NUM_IM1_IRL15 (INT_NUM_IM1_IRL0 + 15)
+#define INT_NUM_IM1_IRL16 (INT_NUM_IM1_IRL0 + 16)
+#define INT_NUM_IM1_IRL17 (INT_NUM_IM1_IRL0 + 17)
+#define INT_NUM_IM1_IRL18 (INT_NUM_IM1_IRL0 + 18)
+#define INT_NUM_IM1_IRL19 (INT_NUM_IM1_IRL0 + 19)
+#define INT_NUM_IM1_IRL20 (INT_NUM_IM1_IRL0 + 20)
+#define INT_NUM_IM1_IRL21 (INT_NUM_IM1_IRL0 + 21)
+#define INT_NUM_IM1_IRL22 (INT_NUM_IM1_IRL0 + 22)
+#define INT_NUM_IM1_IRL23 (INT_NUM_IM1_IRL0 + 23)
+#define INT_NUM_IM1_IRL24 (INT_NUM_IM1_IRL0 + 24)
+#define INT_NUM_IM1_IRL25 (INT_NUM_IM1_IRL0 + 25)
+#define INT_NUM_IM1_IRL26 (INT_NUM_IM1_IRL0 + 26)
+#define INT_NUM_IM1_IRL27 (INT_NUM_IM1_IRL0 + 27)
+#define INT_NUM_IM1_IRL28 (INT_NUM_IM1_IRL0 + 28)
+#define INT_NUM_IM1_IRL29 (INT_NUM_IM1_IRL0 + 29)
+#define INT_NUM_IM1_IRL30 (INT_NUM_IM1_IRL0 + 30)
+#define INT_NUM_IM1_IRL31 (INT_NUM_IM1_IRL0 + 31)
+
+#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM2_IRL1 (INT_NUM_IM2_IRL0 + 1)
+#define INT_NUM_IM2_IRL2 (INT_NUM_IM2_IRL0 + 2)
+#define INT_NUM_IM2_IRL3 (INT_NUM_IM2_IRL0 + 3)
+#define INT_NUM_IM2_IRL4 (INT_NUM_IM2_IRL0 + 4)
+#define INT_NUM_IM2_IRL5 (INT_NUM_IM2_IRL0 + 5)
+#define INT_NUM_IM2_IRL6 (INT_NUM_IM2_IRL0 + 6)
+#define INT_NUM_IM2_IRL7 (INT_NUM_IM2_IRL0 + 7)
+#define INT_NUM_IM2_IRL8 (INT_NUM_IM2_IRL0 + 8)
+#define INT_NUM_IM2_IRL9 (INT_NUM_IM2_IRL0 + 9)
+#define INT_NUM_IM2_IRL10 (INT_NUM_IM2_IRL0 + 10)
+#define INT_NUM_IM2_IRL11 (INT_NUM_IM2_IRL0 + 11)
+#define INT_NUM_IM2_IRL12 (INT_NUM_IM2_IRL0 + 12)
+#define INT_NUM_IM2_IRL13 (INT_NUM_IM2_IRL0 + 13)
+#define INT_NUM_IM2_IRL14 (INT_NUM_IM2_IRL0 + 14)
+#define INT_NUM_IM2_IRL15 (INT_NUM_IM2_IRL0 + 15)
+#define INT_NUM_IM2_IRL16 (INT_NUM_IM2_IRL0 + 16)
+#define INT_NUM_IM2_IRL17 (INT_NUM_IM2_IRL0 + 17)
+#define INT_NUM_IM2_IRL18 (INT_NUM_IM2_IRL0 + 18)
+#define INT_NUM_IM2_IRL19 (INT_NUM_IM2_IRL0 + 19)
+#define INT_NUM_IM2_IRL20 (INT_NUM_IM2_IRL0 + 20)
+#define INT_NUM_IM2_IRL21 (INT_NUM_IM2_IRL0 + 21)
+#define INT_NUM_IM2_IRL22 (INT_NUM_IM2_IRL0 + 22)
+#define INT_NUM_IM2_IRL23 (INT_NUM_IM2_IRL0 + 23)
+#define INT_NUM_IM2_IRL24 (INT_NUM_IM2_IRL0 + 24)
+#define INT_NUM_IM2_IRL25 (INT_NUM_IM2_IRL0 + 25)
+#define INT_NUM_IM2_IRL26 (INT_NUM_IM2_IRL0 + 26)
+#define INT_NUM_IM2_IRL27 (INT_NUM_IM2_IRL0 + 27)
+#define INT_NUM_IM2_IRL28 (INT_NUM_IM2_IRL0 + 28)
+#define INT_NUM_IM2_IRL29 (INT_NUM_IM2_IRL0 + 29)
+#define INT_NUM_IM2_IRL30 (INT_NUM_IM2_IRL0 + 30)
+#define INT_NUM_IM2_IRL31 (INT_NUM_IM2_IRL0 + 31)
+
+#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM3_IRL1 (INT_NUM_IM3_IRL0 + 1)
+#define INT_NUM_IM3_IRL2 (INT_NUM_IM3_IRL0 + 2)
+#define INT_NUM_IM3_IRL3 (INT_NUM_IM3_IRL0 + 3)
+#define INT_NUM_IM3_IRL4 (INT_NUM_IM3_IRL0 + 4)
+#define INT_NUM_IM3_IRL5 (INT_NUM_IM3_IRL0 + 5)
+#define INT_NUM_IM3_IRL6 (INT_NUM_IM3_IRL0 + 6)
+#define INT_NUM_IM3_IRL7 (INT_NUM_IM3_IRL0 + 7)
+#define INT_NUM_IM3_IRL8 (INT_NUM_IM3_IRL0 + 8)
+#define INT_NUM_IM3_IRL9 (INT_NUM_IM3_IRL0 + 9)
+#define INT_NUM_IM3_IRL10 (INT_NUM_IM3_IRL0 + 10)
+#define INT_NUM_IM3_IRL11 (INT_NUM_IM3_IRL0 + 11)
+#define INT_NUM_IM3_IRL12 (INT_NUM_IM3_IRL0 + 12)
+#define INT_NUM_IM3_IRL13 (INT_NUM_IM3_IRL0 + 13)
+#define INT_NUM_IM3_IRL14 (INT_NUM_IM3_IRL0 + 14)
+#define INT_NUM_IM3_IRL15 (INT_NUM_IM3_IRL0 + 15)
+#define INT_NUM_IM3_IRL16 (INT_NUM_IM3_IRL0 + 16)
+#define INT_NUM_IM3_IRL17 (INT_NUM_IM3_IRL0 + 17)
+#define INT_NUM_IM3_IRL18 (INT_NUM_IM3_IRL0 + 18)
+#define INT_NUM_IM3_IRL19 (INT_NUM_IM3_IRL0 + 19)
+#define INT_NUM_IM3_IRL20 (INT_NUM_IM3_IRL0 + 20)
+#define INT_NUM_IM3_IRL21 (INT_NUM_IM3_IRL0 + 21)
+#define INT_NUM_IM3_IRL22 (INT_NUM_IM3_IRL0 + 22)
+#define INT_NUM_IM3_IRL23 (INT_NUM_IM3_IRL0 + 23)
+#define INT_NUM_IM3_IRL24 (INT_NUM_IM3_IRL0 + 24)
+#define INT_NUM_IM3_IRL25 (INT_NUM_IM3_IRL0 + 25)
+#define INT_NUM_IM3_IRL26 (INT_NUM_IM3_IRL0 + 26)
+#define INT_NUM_IM3_IRL27 (INT_NUM_IM3_IRL0 + 27)
+#define INT_NUM_IM3_IRL28 (INT_NUM_IM3_IRL0 + 28)
+#define INT_NUM_IM3_IRL29 (INT_NUM_IM3_IRL0 + 29)
+#define INT_NUM_IM3_IRL30 (INT_NUM_IM3_IRL0 + 30)
+#define INT_NUM_IM3_IRL31 (INT_NUM_IM3_IRL0 + 31)
+
+#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM4_IRL1 (INT_NUM_IM4_IRL0 + 1)
+#define INT_NUM_IM4_IRL2 (INT_NUM_IM4_IRL0 + 2)
+#define INT_NUM_IM4_IRL3 (INT_NUM_IM4_IRL0 + 3)
+#define INT_NUM_IM4_IRL4 (INT_NUM_IM4_IRL0 + 4)
+#define INT_NUM_IM4_IRL5 (INT_NUM_IM4_IRL0 + 5)
+#define INT_NUM_IM4_IRL6 (INT_NUM_IM4_IRL0 + 6)
+#define INT_NUM_IM4_IRL7 (INT_NUM_IM4_IRL0 + 7)
+#define INT_NUM_IM4_IRL8 (INT_NUM_IM4_IRL0 + 8)
+#define INT_NUM_IM4_IRL9 (INT_NUM_IM4_IRL0 + 9)
+#define INT_NUM_IM4_IRL10 (INT_NUM_IM4_IRL0 + 10)
+#define INT_NUM_IM4_IRL11 (INT_NUM_IM4_IRL0 + 11)
+#define INT_NUM_IM4_IRL12 (INT_NUM_IM4_IRL0 + 12)
+#define INT_NUM_IM4_IRL13 (INT_NUM_IM4_IRL0 + 13)
+#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14)
+#define INT_NUM_IM4_IRL15 (INT_NUM_IM4_IRL0 + 15)
+#define INT_NUM_IM4_IRL16 (INT_NUM_IM4_IRL0 + 16)
+#define INT_NUM_IM4_IRL17 (INT_NUM_IM4_IRL0 + 17)
+#define INT_NUM_IM4_IRL18 (INT_NUM_IM4_IRL0 + 18)
+#define INT_NUM_IM4_IRL19 (INT_NUM_IM4_IRL0 + 19)
+#define INT_NUM_IM4_IRL20 (INT_NUM_IM4_IRL0 + 20)
+#define INT_NUM_IM4_IRL21 (INT_NUM_IM4_IRL0 + 21)
+#define INT_NUM_IM4_IRL22 (INT_NUM_IM4_IRL0 + 22)
+#define INT_NUM_IM4_IRL23 (INT_NUM_IM4_IRL0 + 23)
+#define INT_NUM_IM4_IRL24 (INT_NUM_IM4_IRL0 + 24)
+#define INT_NUM_IM4_IRL25 (INT_NUM_IM4_IRL0 + 25)
+#define INT_NUM_IM4_IRL26 (INT_NUM_IM4_IRL0 + 26)
+#define INT_NUM_IM4_IRL27 (INT_NUM_IM4_IRL0 + 27)
+#define INT_NUM_IM4_IRL28 (INT_NUM_IM4_IRL0 + 28)
+#define INT_NUM_IM4_IRL29 (INT_NUM_IM4_IRL0 + 29)
+#define INT_NUM_IM4_IRL30 (INT_NUM_IM4_IRL0 + 30)
+#define INT_NUM_IM4_IRL31 (INT_NUM_IM4_IRL0 + 31)
+
+/****** Interrupt Assigments ***********/
+#define AMAZON_DMA_INT INT_NUM_IM0_IRL0
+#define IFX_SSC_TIR INT_NUM_IM0_IRL29
+#define IFX_SSC_RIR INT_NUM_IM0_IRL30
+#define IFX_SSC_EIR INT_NUM_IM0_IRL31
+
+#define AMAZON_MEI_INT INT_NUM_IM2_IRL8
+
+#define AMAZONASC_TIR INT_NUM_IM4_IRL15/* TX interrupt */
+#define AMAZONASC_RIR INT_NUM_IM4_IRL16/* RX interrupt */
+#define AMAZONASC_EIR INT_NUM_IM4_IRL17/* ERROR interrupt */
+
+#define AMAZON_TIMER6_INT INT_NUM_IM1_IRL23
+
+#define AMAZON_SWIE_INT INT_NUM_IM3_IRL8
+#define AMAZON_CBM_INT INT_NUM_IM3_IRL9
+#define AMAZON_AAL5_INT INT_NUM_IM3_IRL10
+#define AMAZON_HTU_INT INT_NUM_IM3_IRL11
+#define AMAZON_QSB_INT INT_NUM_IM3_IRL12
+#define MIPS_CPU_TIMER_IRQ 7
+#endif /* __AMAZON_IRQ */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/model.h b/target/linux/amazon/files/include/asm-mips/amazon/model.h
new file mode 100644
index 0000000..4e43ab5
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/model.h
@@ -0,0 +1,29 @@
+#ifndef AMAZON_MODEL_H
+#define AMAZON_MODEL_H
+/******************************************************************************
+ Copyright (c) 2002, Infineon Technologies. All rights reserved.
+
+ No Warranty
+ Because the program is licensed free of charge, there is no warranty for
+ the program, to the extent permitted by applicable law. Except when
+ otherwise stated in writing the copyright holders and/or other parties
+ provide the program "as is" without warranty of any kind, either
+ expressed or implied, including, but not limited to, the implied
+ warranties of merchantability and fitness for a particular purpose. The
+ entire risk as to the quality and performance of the program is with
+ you. should the program prove defective, you assume the cost of all
+ necessary servicing, repair or correction.
+
+ In no event unless required by applicable law or agreed to in writing
+ will any copyright holder, or any other party who may modify and/or
+ redistribute the program as permitted above, be liable to you for
+ damages, including any general, special, incidental or consequential
+ damages arising out of the use or inability to use the program
+ (including but not limited to loss of data or data being rendered
+ inaccurate or losses sustained by you or third parties or a failure of
+ the program to operate with any other programs), even if such holder or
+ other party has been advised of the possibility of such damages.
+******************************************************************************/
+#define BOARD_SYSTEM_TYPE "AMAZON"
+#define SYSTEM_MODEL_NAME "Amazon Gateway Package 3.2 Version"
+#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/port.h b/target/linux/amazon/files/include/asm-mips/amazon/port.h
new file mode 100644
index 0000000..2182579
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/port.h
@@ -0,0 +1,72 @@
+/*
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * port.h
+ *
+ * Global Amazon port driver header file
+ *
+ */
+
+/* Modification history */
+/* 21Jun2004 btxu Generate from Inca_IP project */
+
+
+#ifndef PORT_H
+#define PORT_H
+
+struct amazon_port_ioctl_parm {
+ int port;
+ int pin;
+ int value;
+};
+#define AMAZON_PORT_IOC_MAGIC 0xbf
+#define AMAZON_PORT_IOCOD _IOW( AMAZON_PORT_IOC_MAGIC,0,struct amazon_port_ioctl_parm)
+#define AMAZON_PORT_IOCPUDSEL _IOW( AMAZON_PORT_IOC_MAGIC,1,struct amazon_port_ioctl_parm)
+#define AMAZON_PORT_IOCPUDEN _IOW( AMAZON_PORT_IOC_MAGIC,2,struct amazon_port_ioctl_parm)
+#define AMAZON_PORT_IOCSTOFF _IOW( AMAZON_PORT_IOC_MAGIC,3,struct amazon_port_ioctl_parm)
+#define AMAZON_PORT_IOCDIR _IOW( AMAZON_PORT_IOC_MAGIC,4,struct amazon_port_ioctl_parm)
+#define AMAZON_PORT_IOCOUTPUT _IOW( AMAZON_PORT_IOC_MAGIC,5,struct amazon_port_ioctl_parm)
+#define AMAZON_PORT_IOCINPUT _IOWR(AMAZON_PORT_IOC_MAGIC,6,struct amazon_port_ioctl_parm)
+#define AMAZON_PORT_IOCALTSEL0 _IOW( AMAZON_PORT_IOC_MAGIC,7,struct amazon_port_ioctl_parm)
+#define AMAZON_PORT_IOCALTSEL1 _IOW( AMAZON_PORT_IOC_MAGIC,8,struct amazon_port_ioctl_parm)
+
+int amazon_port_reserve_pin(int port, int pin, int module_id);
+int amazon_port_free_pin(int port, int pin, int module_id);
+int amazon_port_set_open_drain(int port, int pin, int module_id);
+int amazon_port_clear_open_drain(int port, int pin, int module_id);
+int amazon_port_set_pudsel(int port, int pin, int module_id);
+int amazon_port_clear_pudsel(int port, int pin, int module_id);
+int amazon_port_set_puden(int port, int pin, int module_id);
+int amazon_port_clear_puden(int port, int pin, int module_id);
+int amazon_port_set_stoff(int port, int pin, int module_id);
+int amazon_port_clear_stoff(int port, int pin, int module_id);
+int amazon_port_set_dir_out(int port, int pin, int module_id);
+int amazon_port_set_dir_in(int port, int pin, int module_id);
+int amazon_port_set_output(int port, int pin, int module_id);
+int amazon_port_clear_output(int port, int pin, int module_id);
+int amazon_port_get_input(int port, int pin, int module_id);
+
+int amazon_port_set_altsel0(int port, int pin, int module_id);
+int amazon_port_clear_altsel0(int port, int pin, int module_id);
+int amazon_port_set_altsel1(int port, int pin, int module_id);
+int amazon_port_clear_altsel1(int port, int pin, int module_id);
+
+
+#endif /* PORT_H */
+
+
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/serial.h b/target/linux/amazon/files/include/asm-mips/amazon/serial.h
new file mode 100644
index 0000000..3ff3efc
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/amazon/serial.h
@@ -0,0 +1,146 @@
+/* incaAscSio.h - (AMAZON) ASC UART tty driver header */
+
+#ifndef __AMAZON_ASC_H
+#define __AMAZON_ASC_H
+
+/* channel operating modes */
+#define ASCOPT_CSIZE 0x00000003
+#define ASCOPT_CS7 0x00000001
+#define ASCOPT_CS8 0x00000002
+#define ASCOPT_PARENB 0x00000004
+#define ASCOPT_STOPB 0x00000008
+#define ASCOPT_PARODD 0x00000010
+#define ASCOPT_CREAD 0x00000020
+
+#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
+
+/* ASC input select (0 or 1) */
+#define CONSOLE_TTY 0
+
+/* use fractional divider for baudrate settings */
+#define AMAZONASC_USE_FDV
+
+#ifdef AMAZONASC_USE_FDV
+ #define AMAZONASC_FDV_LOW_BAUDRATE 71
+#ifdef CONFIG_USE_IKOS
+ #define AMAZONASC_FDV_HIGH_BAUDRATE 443
+#else
+ #define AMAZONASC_FDV_HIGH_BAUDRATE 498
+#endif //CONFIG_USE_IKOS
+#endif /*AMAZONASC_USE_FDV*/
+
+
+#define AMAZONASC_TXFIFO_FL 1
+#define AMAZONASC_RXFIFO_FL 1
+#define AMAZONASC_TXFIFO_FULL 16
+
+/* interrupt lines masks for the ASC device interrupts*/
+/* change these macroses if it's necessary */
+#define AMAZONASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */
+
+#define AMAZONASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */
+#define AMAZONASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */
+#define AMAZONASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */
+#define AMAZONASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/
+
+/* CLC register's bits and bitfields */
+#define ASCCLC_DISR 0x00000001
+#define ASCCLC_DISS 0x00000002
+#define ASCCLC_RMCMASK 0x0000FF00
+#define ASCCLC_RMCOFFSET 8
+
+/* CON register's bits and bitfields */
+#define ASCCON_MODEMASK 0x0007
+ #define ASCCON_M_8SYNC 0x0
+ #define ASCCON_M_8ASYNC 0x1
+ #define ASCCON_M_8IRDAASYNC 0x2
+ #define ASCCON_M_7ASYNCPAR 0x3
+ #define ASCCON_M_9ASYNC 0x4
+ #define ASCCON_M_8WAKEUPASYNC 0x5
+ #define ASCCON_M_8ASYNCPAR 0x7
+#define ASCCON_STP 0x0008
+#define ASCCON_REN 0x0010
+#define ASCCON_PEN 0x0020
+#define ASCCON_FEN 0x0040
+#define ASCCON_OEN 0x0080
+#define ASCCON_PE 0x0100
+#define ASCCON_FE 0x0200
+#define ASCCON_OE 0x0400
+#define ASCCON_FDE 0x0800
+#define ASCCON_ODD 0x1000
+#define ASCCON_BRS 0x2000
+#define ASCCON_LB 0x4000
+#define ASCCON_R 0x8000
+#define ASCCON_ANY (ASCCON_PE|ASCCON_FE|ASCCON_OE)
+
+/* WHBCON register's bits and bitfields */
+#define ASCWHBCON_CLRREN 0x0010
+#define ASCWHBCON_SETREN 0x0020
+#define ASCWHBCON_CLRPE 0x0100
+#define ASCWHBCON_CLRFE 0x0200
+#define ASCWHBCON_CLROE 0x0400
+#define ASCWHBCON_SETPE 0x0800
+#define ASCWHBCON_SETFE 0x1000
+#define ASCWHBCON_SETOE 0x2000
+
+/* ABCON register's bits and bitfields */
+#define ASCABCON_ABEN 0x0001
+#define ASCABCON_AUREN 0x0002
+#define ASCABCON_ABSTEN 0x0004
+#define ASCABCON_ABDETEN 0x0008
+#define ASCABCON_FCDETEN 0x0010
+#define ASCABCON_EMMASK 0x0300
+ #define ASCABCON_EMOFF 8
+ #define ASCABCON_EM_DISAB 0x0
+ #define ASCABCON_EM_DURAB 0x1
+ #define ASCABCON_EM_ALWAYS 0x2
+#define ASCABCON_TXINV 0x0400
+#define ASCABCON_RXINV 0x0800
+
+/* FDV register mask, offset and bitfields*/
+#define ASCFDV_VALUE_MASK 0x000001FF
+
+/* WHBABCON register's bits and bitfields */
+#define ASCWHBABCON_SETABEN 0x0001
+#define ASCWHBABCON_CLRABEN 0x0002
+
+/* ABSTAT register's bits and bitfields */
+#define ASCABSTAT_FCSDET 0x0001
+#define ASCABSTAT_FCCDET 0x0002
+#define ASCABSTAT_SCSDET 0x0004
+#define ASCABSTAT_SCCDET 0x0008
+#define ASCABSTAT_DETWAIT 0x0010
+
+/* WHBABSTAT register's bits and bitfields */
+#define ASCWHBABSTAT_CLRFCSDET 0x0001
+#define ASCWHBABSTAT_SETFCSDET 0x0002
+#define ASCWHBABSTAT_CLRFCCDET 0x0004
+#define ASCWHBABSTAT_SETFCCDET 0x0008
+#define ASCWHBABSTAT_CLRSCSDET 0x0010
+#define ASCWHBABSTAT_SETSCSDET 0x0020
+#define ASCWHBABSTAT_SETSCCDET 0x0040
+#define ASCWHBABSTAT_CLRSCCDET 0x0080
+#define ASCWHBABSTAT_CLRDETWAIT 0x0100
+#define ASCWHBABSTAT_SETDETWAIT 0x0200
+
+/* TXFCON register's bits and bitfields */
+#define ASCTXFCON_TXFEN 0x0001
+#define ASCTXFCON_TXFFLU 0x0002
+#define ASCTXFCON_TXTMEN 0x0004
+#define ASCTXFCON_TXFITLMASK 0x3F00
+#define ASCTXFCON_TXFITLOFF 8
+
+/* RXFCON register's bits and bitfields */
+#define ASCRXFCON_RXFEN 0x0001
+#define ASCRXFCON_RXFFLU 0x0002
+#define ASCRXFCON_RXTMEN 0x0004
+#define ASCRXFCON_RXFITLMASK 0x3F00
+#define ASCRXFCON_RXFITLOFF 8
+
+/* FSTAT register's bits and bitfields */
+#define ASCFSTAT_RXFFLMASK 0x003F
+#define ASCFSTAT_TXFFLMASK 0x3F00
+#define ASCFSTAT_TXFFLOFF 8
+
+#endif /* __AMAZON_ASC_H */
+
diff --git a/target/linux/amazon/files/include/asm-mips/mach-amazon/irq.h b/target/linux/amazon/files/include/asm-mips/mach-amazon/irq.h
new file mode 100644
index 0000000..e72b7d5
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/mach-amazon/irq.h
@@ -0,0 +1,7 @@
+#ifndef __AMAZON_IRQ_H
+#define __AMAZON_IRQ_H
+
+#define NR_IRQS 256
+#include_next <irq.h>
+
+#endif
diff --git a/target/linux/amazon/files/include/asm-mips/mach-amazon/mangle-port.h b/target/linux/amazon/files/include/asm-mips/mach-amazon/mangle-port.h
new file mode 100644
index 0000000..9aefebb
--- /dev/null
+++ b/target/linux/amazon/files/include/asm-mips/mach-amazon/mangle-port.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H
+#define __ASM_MACH_GENERIC_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port) (port)
+#define __swizzle_addr_w(port) ((port) ^ 2)
+#define __swizzle_addr_l(port) (port)
+#define __swizzle_addr_q(port) (port)
+
+/*
+ * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
+ * less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time. Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses. The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "__mem_" prefix.
+ */
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(a,x) (x)
+# define __mem_ioswabb(a,x) (x)
+# define ioswabw(a,x) le16_to_cpu(x)
+# define __mem_ioswabw(a,x) (x)
+# define ioswabl(a,x) le32_to_cpu(x)
+# define __mem_ioswabl(a,x) (x)
+# define ioswabq(a,x) le64_to_cpu(x)
+# define __mem_ioswabq(a,x) (x)
+
+#else
+
+# define ioswabb(a,x) (x)
+# define __mem_ioswabb(a,x) (x)
+# define ioswabw(a,x) (x)
+# define __mem_ioswabw(a,x) cpu_to_le16(x)
+# define ioswabl(a,x) (x)
+# define __mem_ioswabl(a,x) cpu_to_le32(x)
+# define ioswabq(a,x) (x)
+# define __mem_ioswabq(a,x) cpu_to_le32(x)
+
+#endif
+
+#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */
diff --git a/target/linux/amazon/image/Makefile b/target/linux/amazon/image/Makefile
new file mode 100644
index 0000000..29935f9
--- /dev/null
+++ b/target/linux/amazon/image/Makefile
@@ -0,0 +1,30 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/BuildKernel
+ $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma
+ mkimage -A mips -O linux -T kernel -C lzma -a 0x80002000 -e \
+ 0x80002000 \
+ -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+ -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage
+
+ cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage
+endef
+
+define Image/Build/squashfs
+ $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image)
+endef
+
+define Image/Build
+ cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image
+ $(call Image/Build/$(1),$(1))
+endef
+
+
+$(eval $(call BuildImage))
diff --git a/target/linux/amazon/patches/017-wdt-driver.patch b/target/linux/amazon/patches/017-wdt-driver.patch
new file mode 100644
index 0000000..b915ebe
--- /dev/null
+++ b/target/linux/amazon/patches/017-wdt-driver.patch
@@ -0,0 +1,10 @@
+--- linux-2.6.21.5/drivers/char/watchdog/Makefile.orig 2007-08-05 11:13:29.177013987 +0200
++++ linux-2.6.21.5/drivers/char/watchdog/Makefile 2007-08-05 11:13:52.190325445 +0200
+@@ -74,6 +74,7 @@
+ # MIPS Architecture
+ obj-$(CONFIG_INDYDOG) += indydog.o
+ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
++obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
+
+ # S390 Architecture
+
diff --git a/target/linux/amazon/patches/100-board.patch b/target/linux/amazon/patches/100-board.patch
new file mode 100644
index 0000000..9b29141
--- /dev/null
+++ b/target/linux/amazon/patches/100-board.patch
@@ -0,0 +1,63 @@
+diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
+--- linux.old/arch/mips/Kconfig 2007-02-02 23:55:52.912446784 +0100
++++ linux.dev/arch/mips/Kconfig 2007-02-03 21:50:25.262027104 +0100
+@@ -145,6 +145,17 @@
+ note that a kernel built with this option selected will not be
+ able to run on normal units.
+
++config AMAZON
++ bool "Amazon support (EXPERIMENTAL)"
++ depends on EXPERIMENTAL
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select HAVE_STD_PC_SERIAL_PORT
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_HAS_EARLY_PRINTK
++
+ config MIPS_COBALT
+ bool "Cobalt Server"
+ select DMA_NONCOHERENT
+@@ -766,6 +776,7 @@
+
+ endchoice
+
++source "arch/mips/amazon/Kconfig"
+ source "arch/mips/ddb5xxx/Kconfig"
+ source "arch/mips/gt64120/ev64120/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile 2007-02-02 23:55:52.913446632 +0100
++++ linux.dev/arch/mips/Makefile 2007-02-03 17:40:29.193776000 +0100
+@@ -267,6 +267,13 @@
+ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
+
+ #
++# Infineon AMAZON
++#
++core-$(CONFIG_AMAZON) += arch/mips/amazon/
++cflags-$(CONFIG_AMAZON) += -Iinclude/asm-mips/mach-amazon
++load-$(CONFIG_AMAZON) += 0xffffffff80002000
++
++#
+ # Cobalt Server
+ #
+ core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
+diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
+--- linux.old/include/asm-mips/bootinfo.h 2007-02-02 23:55:52.913446632 +0100
++++ linux.dev/include/asm-mips/bootinfo.h 2007-02-03 17:51:02.531494032 +0100
+@@ -212,6 +212,12 @@
+ #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
+ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+
++/*
++ * Valid machtype for group ATHEROS
++ */
++#define MACH_GROUP_INFINEON 27
++#define MACH_INFINEON_AMAZON 0
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
+
diff --git a/target/linux/amazon/patches/110-char_drivers.patch b/target/linux/amazon/patches/110-char_drivers.patch
new file mode 100644
index 0000000..7394964
--- /dev/null
+++ b/target/linux/amazon/patches/110-char_drivers.patch
@@ -0,0 +1,12 @@
+Index: linux-2.6.21.5/drivers/char/Makefile
+===================================================================
+--- linux-2.6.21.5.orig/drivers/char/Makefile 2007-06-24 07:44:10.606341712 +0200
++++ linux-2.6.21.5/drivers/char/Makefile 2007-06-24 07:44:46.633864696 +0200
+@@ -103,6 +103,7 @@
+
+ obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
+ obj-$(CONFIG_TCG_TPM) += tpm/
++obj-$(CONFIG_AMAZONE_WDT) += amazone_wdt.o
+
+ # Files generated that shall be removed upon make clean
+ clean-files := consolemap_deftbl.c defkeymap.c
diff --git a/target/linux/amazon/patches/130-mtd_drivers.patch b/target/linux/amazon/patches/130-mtd_drivers.patch
new file mode 100644
index 0000000..31f8164
--- /dev/null
+++ b/target/linux/amazon/patches/130-mtd_drivers.patch
@@ -0,0 +1,9 @@
+Index: linux-2.6.21.5/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.21.5.orig/drivers/mtd/maps/Makefile 2007-06-24 07:55:22.138253344 +0200
++++ linux-2.6.21.5/drivers/mtd/maps/Makefile 2007-06-24 07:56:58.207648576 +0200
+@@ -72,3 +72,4 @@
+ obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
+ obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
+ obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
++obj-$(CONFIG_AMAZON_MTD) += amazon.o
diff --git a/target/linux/amazon/patches/140-net_drivers.patch b/target/linux/amazon/patches/140-net_drivers.patch
new file mode 100644
index 0000000..65a0e44
--- /dev/null
+++ b/target/linux/amazon/patches/140-net_drivers.patch
@@ -0,0 +1,10 @@
+Index: linux-2.6.21.5/drivers/net/Makefile
+===================================================================
+--- linux-2.6.21.5.orig/drivers/net/Makefile 2007-06-24 09:03:20.308277264 +0200
++++ linux-2.6.21.5/drivers/net/Makefile 2007-06-24 09:05:13.560060376 +0200
+@@ -219,3 +219,5 @@
+ obj-$(CONFIG_FS_ENET) += fs_enet/
+
+ obj-$(CONFIG_NETXEN_NIC) += netxen/
++
++obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
diff --git a/target/linux/amazon/patches/150-serial_driver.patch b/target/linux/amazon/patches/150-serial_driver.patch
new file mode 100644
index 0000000..802c5c2
--- /dev/null
+++ b/target/linux/amazon/patches/150-serial_driver.patch
@@ -0,0 +1,12 @@
+Index: linux-2.6.21.5/drivers/serial/Makefile
+===================================================================
+--- linux-2.6.21.5.orig/drivers/serial/Makefile 2007-06-24 10:51:45.005412992 +0200
++++ linux-2.6.21.5/drivers/serial/Makefile 2007-06-24 10:51:54.885910928 +0200
+@@ -5,6 +5,7 @@
+ #
+
+ obj-$(CONFIG_SERIAL_CORE) += serial_core.o
++obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
+ obj-$(CONFIG_SERIAL_21285) += 21285.o
+ obj-$(CONFIG_SERIAL_8250) += 8250.o
+ obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
diff --git a/target/linux/amazon/patches/160-cfi-swap.patch b/target/linux/amazon/patches/160-cfi-swap.patch
new file mode 100644
index 0000000..9e20f05
--- /dev/null
+++ b/target/linux/amazon/patches/160-cfi-swap.patch
@@ -0,0 +1,14 @@
+--- linux-2.6.21.5/drivers/mtd/chips/cfi_cmdset_0002.c 2007-07-23 23:15:50.403369508 +0200
++++ linux-2.6.21.5.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-07-23 23:26:43.028560499 +0200
+@@ -1007,7 +1007,9 @@
+ int ret = 0;
+ map_word oldd;
+ int retry_cnt = 0;
+-
++#ifdef CONFIG_AMAZON
++ adr ^= 2;
++#endif
+ adr += chip->start;
+
+ spin_lock(chip->mutex);
+