summaryrefslogtreecommitdiff
path: root/target/linux/apm821xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/apm821xx')
-rwxr-xr-xtarget/linux/apm821xx/base-files/etc/board.d/01_leds8
-rwxr-xr-xtarget/linux/apm821xx/base-files/etc/board.d/02_network6
-rwxr-xr-xtarget/linux/apm821xx/base-files/etc/diag.sh4
-rw-r--r--target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom89
-rwxr-xr-xtarget/linux/apm821xx/base-files/lib/apm821xx.sh4
-rwxr-xr-xtarget/linux/apm821xx/base-files/lib/upgrade/platform.sh9
-rw-r--r--target/linux/apm821xx/config-4.42
-rw-r--r--target/linux/apm821xx/dts/wndr4700.dts762
-rw-r--r--target/linux/apm821xx/files/arch/powerpc/platforms/44x/wndr4700.c96
-rw-r--r--target/linux/apm821xx/image/Makefile83
-rw-r--r--target/linux/apm821xx/nand/config-default31
-rw-r--r--target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch32
-rw-r--r--target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch14
-rw-r--r--target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch335
-rw-r--r--target/linux/apm821xx/patches-4.4/800-usb-dwc2-add-wndr4700-otg.patch48
-rw-r--r--target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch550
-rw-r--r--target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch57
17 files changed, 2129 insertions, 1 deletions
diff --git a/target/linux/apm821xx/base-files/etc/board.d/01_leds b/target/linux/apm821xx/base-files/etc/board.d/01_leds
index bcc7a9f..48fe139 100755
--- a/target/linux/apm821xx/base-files/etc/board.d/01_leds
+++ b/target/linux/apm821xx/base-files/etc/board.d/01_leds
@@ -19,6 +19,14 @@ mr24)
mbl)
;;
+wndr4700)
+ ucidef_set_led_netdev "wan" "WAN (green)" "wndr4700:green:wan" "eth0.2"
+ ucidef_set_led_usbdev "usb3-1" "USB3-1" "wndr4700:blue:usb" "2-1"
+ ucidef_set_led_usbdev "usb3-2" "USB3-2" "wndr4700:blue:usb" "3-1"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "wndr4700:blue:wlan" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "wndr4700:blue:wlan" "phy1tpt"
+ ;;
+
*)
;;
esac
diff --git a/target/linux/apm821xx/base-files/etc/board.d/02_network b/target/linux/apm821xx/base-files/etc/board.d/02_network
index 9525d8c..3a25709 100755
--- a/target/linux/apm821xx/base-files/etc/board.d/02_network
+++ b/target/linux/apm821xx/base-files/etc/board.d/02_network
@@ -13,6 +13,12 @@ mbl | \
mr24)
ucidef_set_interface_lan "eth0"
;;
+
+wndr4700)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "4:lan" "3:lan" "2:lan" "1:lan" "5:wan"
+ ;;
+
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
diff --git a/target/linux/apm821xx/base-files/etc/diag.sh b/target/linux/apm821xx/base-files/etc/diag.sh
index bea66eb..3ddd21d 100755
--- a/target/linux/apm821xx/base-files/etc/diag.sh
+++ b/target/linux/apm821xx/base-files/etc/diag.sh
@@ -13,6 +13,10 @@ get_status_led() {
status_led="mr24:green:power"
;;
+ wndr4700)
+ status_led="wndr4700:green:power"
+ ;;
+
*)
;;
esac
diff --git a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
new file mode 100644
index 0000000..dfdc548
--- /dev/null
+++ b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -0,0 +1,89 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/apm821xx.sh
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+ath9k_eeprom_die() {
+ echo "ath9k eeprom: " "$*"
+ exit 1
+}
+
+ath9k_eeprom_extract() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local mtd
+
+ mtd=$(find_mtd_chardev $part)
+ [ -n "$mtd" ] || \
+ ath9k_eeprom_die "no mtd device found for partition $part"
+
+ dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+ ath9k_eeprom_die "failed to extract from $mtd"
+}
+
+ath9k_ubi_eeprom_extract() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local ubidev=$(nand_find_ubi $CI_UBIPART)
+ local ubi
+
+ ubi=$(nand_find_volume $ubidev $part)
+ [ -n "$ubi" ] || \
+ ath9k_eeprom_die "no UBI volume found for $part"
+
+ dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+ ath9k_eeprom_die "failed to extract from $ubi"
+}
+
+ath9k_patch_firmware_mac() {
+ local mac=$1
+
+ [ -z "$mac" ] && return
+
+ macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6
+}
+
+board=$(apm821xx_board_name)
+
+case "$FIRMWARE" in
+"pci_wmac0.eeprom")
+ case $board in
+ wndr4700)
+ . /lib/upgrade/nand.sh
+
+ if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+ ath9k_ubi_eeprom_extract "caldata" 20480 4096
+ else
+ ath9k_eeprom_extract "wifi_data" 20480 4096
+ ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 12)
+ fi
+ ;;
+ *)
+ ath9k_eeprom_die "board $board is not supported yet"
+ ;;
+ esac
+ ;;
+
+"pci_wmac1.eeprom")
+ case $board in
+ wndr4700)
+ . /lib/upgrade/nand.sh
+
+ if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+ ath9k_ubi_eeprom_extract "caldata" 4096 4096
+ else
+ ath9k_eeprom_extract "wifi_data" 4096 4096
+ ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0)
+ fi
+ ;;
+ *)
+ ath9k_eeprom_die "board $board is not supported yet"
+ ;;
+ esac
+ ;;
+esac
diff --git a/target/linux/apm821xx/base-files/lib/apm821xx.sh b/target/linux/apm821xx/base-files/lib/apm821xx.sh
index 98e88cf..78fe452 100755
--- a/target/linux/apm821xx/base-files/lib/apm821xx.sh
+++ b/target/linux/apm821xx/base-files/lib/apm821xx.sh
@@ -18,6 +18,10 @@ apm821xx_board_detect() {
name="mbl"
;;
+ *"Netgear WNDR4700/WNDR4720 Series")
+ name="wndr4700"
+ ;;
+
*)
name="unknown"
;;
diff --git a/target/linux/apm821xx/base-files/lib/upgrade/platform.sh b/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
index d5b0986..5559767 100755
--- a/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
@@ -21,6 +21,11 @@ platform_check_image() {
return $?;
;;
+ wndr4700)
+ nand_do_platform_check $board "$1"
+ return $?;
+ ;;
+
*)
;;
esac
@@ -37,6 +42,10 @@ platform_pre_upgrade() {
merakinand_do_upgrade "$1"
;;
+ wndr4700)
+ nand_do_upgrade "$1"
+ ;;
+
*)
;;
esac
diff --git a/target/linux/apm821xx/config-4.4 b/target/linux/apm821xx/config-4.4
index 804e7e8..1515dda 100644
--- a/target/linux/apm821xx/config-4.4
+++ b/target/linux/apm821xx/config-4.4
@@ -319,6 +319,7 @@ CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_USB_SUPPORT=y
CONFIG_VDSO32=y
# CONFIG_WARP is not set
+# CONFIG_WNDR4700 is not set
CONFIG_WORD_SIZE=32
# CONFIG_XILINX_SYSACE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
@@ -328,3 +329,4 @@ CONFIG_XZ_DEC_POWERPC=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
# CONFIG_JFFS2_FS is not set
+# CONFIG_SENSORS_TC654 is not set
diff --git a/target/linux/apm821xx/dts/wndr4700.dts b/target/linux/apm821xx/dts/wndr4700.dts
new file mode 100644
index 0000000..9a2ceb9
--- /dev/null
+++ b/target/linux/apm821xx/dts/wndr4700.dts
@@ -0,0 +1,762 @@
+/*
+ * Device Tree Source for Netgear WNDR4700/WNDR4720 Series
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "Netgear WNDR4700/WNDR4720 Series";
+ compatible = "netgear,wndr4700";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,apm82181";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ OCM1: ocm@400040000 {
+ compatible = "ibm,ocm";
+ status = "okay";
+ cell-index = <1>;
+ /* configured in U-Boot */
+ reg = <4 0x00040000 0x8000>; /* 32K */
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460ex";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460ex";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008
+ 0x030 0x008>;
+ cache-line-size = <32>;
+ cache-size = <262144>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
+ CPM0: cpm {
+ compatible = "ibm,cpm-apm821xx", "ibm,cpm";
+ cell-index = <0>;
+ dcr-reg = <0x160 0x003>;
+ pm-cpu = <0x02000000>;
+ pm-doze = <0x302570F0>;
+ pm-nap = <0x302570F0>;
+ pm-deepsleep = <0x302570F0>;
+ pm-iic-device = <&IIC0>;
+ pm-emac-device = <&EMAC0>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460ex", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ RTC: rtc {
+ compatible = "ibm,rtc";
+ dcr-reg = <0x240 0x009>;
+ interrupts = <0x1a 0x4>;
+ interrupt-parent = <&UIC2>;
+
+ };
+
+ CRYPTO: crypto@180000 {
+ compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+ reg = <4 0x00180000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1d 0x4>;
+ };
+
+ PKA: pka@114000 {
+ device_type = "pka";
+ compatible = "ppc4xx-pka", "amcc,ppc4xx-pka", "amcc, ppc4xx-pka";
+ reg = <4 0x00114000 0x4000>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x14 0x1>;
+ };
+
+ TRNG: trng@110000 {
+ device_type = "trng";
+ compatible = "amcc,ppc460ex-rng", "ppc4xx-rng", "amcc, ppc4xx-trng";
+ reg = <4 0x00110000 0x100>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x3 0x4>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+ descriptor-memory = "ocm";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <1>;
+ num-rx-chans = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4
+ /*TX0 COAL*/ 0x8 0x2
+ /*TX1 COAL 0x9 0x2*/
+ /*RX0 COAL*/ 0xc 0x2
+ /*RX1 COAL 0xd 0x2*/>;
+ };
+
+ AHBDMA: dma@bffd0800 {
+ compatible = "snps,dma-spear1340";
+ reg = <4 0xbffd0800 0x400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <25 4>;
+ #dma-cells = <3>;
+ /* use autoconfiguration for the dma setup */
+ };
+
+ SATA0: sata@bffd1000 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1000 0x800>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <26 4>;
+ dmas = <&AHBDMA 0 0 1>;
+ dma-names = "sata-dma";
+ status = "disabled"; /* disabled by uboot */
+ };
+
+ SATA1: sata@bffd1800 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1800 0x800>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <27 4>;
+ dmas = <&AHBDMA 1 0 2>;
+ dma-names = "sata-dma";
+ };
+
+ USBOTG0: usbotg@bff80000 {
+ compatible = "netgear,wndr4700-usb";
+ reg = <4 0xbff80000 0x10000>;
+ interrupt-parent = <&USBOTG0>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </* USB-OTG */ 0 &UIC2 0x1c 4
+ /* HIGH-POWER */ 1 &UIC1 0x1a 8
+ /* DMA */ 2 &UIC0 0xc 4>;
+ dr_mode = "host";
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460ex", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <1>;
+ reg = <0x00000000 0x00000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ partition@0 {
+ label = "back-up";
+ reg = <0x00000000 0x00080000>;
+ };
+ partition@1 {
+ label = "u-boot";
+ reg = <0x00080000 0x0080000>;
+ };
+ };
+ ndfc@1,0 {
+ compatible = "ibm,ndfc";
+ reg = <00000003 00000000 00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*128 MiB Nand Flash*/
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0,0@0x00000000 {
+ label = "NAND 128MiB 3,3V 8-bit";
+ reg = <0x00000000 0x08000000>;
+ read-only;
+ };
+
+ partition0,1@0x00000000 {
+ label = "uboot";
+ reg = <0x00000000 0x00180000>;
+ read-only;
+ };
+
+ partition0,2@0x00180000 {
+ label = "device-tree";
+ reg = <0x00180000 0x00020000>;
+ read-only;
+ };
+
+ partition0,3@0x001a0000 {
+ label = "kernel";
+ reg = <0x001a0000 0x001e0000>;
+ /*
+ * will also contain a fake/empty
+ * rootfs to fool Netgear's uboot
+ * rootfs integrety checks.
+ */
+ };
+
+ partition0,4@0x00380000 {
+ label = "ubi";
+ reg = <0x00380000 0x01660000>;
+ };
+
+ partition0,5@0x019e0000 {
+ label = "config";
+ reg = <0x019e0000 0x00080000>;
+ read-only;
+ };
+
+ partition0,6@0x01a60000 {
+ label = "pot";
+ reg = <0x01a60000 0x00080000>;
+ read-only;
+ };
+
+ partition0,7@0x01ae0000 {
+ label = "traffic_meter";
+ reg = <0x01ae0000 0x00300000>;
+ read-only;
+ };
+
+ partition0,8@0x01de0000 {
+ label = "language";
+ reg = <0x01de0000 0x001c0000>;
+ read-only;
+ };
+
+ partition0,9@0x01fa0000 {
+ label = "ecos";
+ reg = <0x01fa0000 0x06020000>;
+ read-only;
+ };
+
+ partition0,10@0x07fc0000 {
+ label = "wifi_data";
+ reg = <0x07fc0000 0x00040000>;
+ read-only;
+ };
+
+ partition0,11@0x00180000 {
+ label = "firmware";
+ reg = <0x00180000 0x01860000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ GPIO0: gpio@ef600b00 {
+ compatible = "ibm,ppc4xx-gpio";
+ reg = <0xef600b00 0x00000048>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ interrupts-extended = <&UIC1 0x14>,
+ <&UIC1 0x1e>,
+ <&UIC1 0x1f>,
+ <&UIC2 0x19>;
+ };
+
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ autorepeat;
+ poll-interval = <60>; /* 3 * 20 = 60ms */
+
+ reset {
+ label = "Reset button";
+ linux,code = <0x198>; /* KEY_RESTART */
+ gpios = <&GPIO0 15 0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x14 0x2>;
+ };
+
+ backup_hd {
+ label = "Backup HD button";
+ gpios = <&GPIO0 19 0>;
+ linux,code = <0x100>; /* BTN_0 */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1e 0x2>;
+ };
+
+ rfkill {
+ label = "RFKILL button";
+ gpios = <&GPIO0 20 0>;
+ linux,code = <0xf7>; /* KEY_RFKILL */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1f 0x2>;
+ };
+
+ wps {
+ label = "WPS button";
+ gpios = <&GPIO0 23 0>;
+ linux,code = <0x211>; /* KEY_WPS_BUTTON */
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x19 0x2>;
+ };
+
+ sdcard {
+ label = "SDCard inserted";
+ gpios = <&GPIO0 7 0>;
+ linux,code = <0x101>; /* BTN_1 */
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power-green {
+ label = "wndr4700:green:power";
+ gpios = <&GPIO0 8 0>;
+ };
+
+ power-orange {
+ label = "wndr4700:orange:power";
+ gpios = <&GPIO0 9 1>;
+ linux,default-trigger = "panic";
+ };
+
+ usb-blue {
+ label = "wndr4700:blue:usb";
+ gpios = <&GPIO0 10 0>;
+ };
+
+ logo-white {
+ label = "wndr4700:white:logo";
+ gpios = <&GPIO0 11 0>;
+ };
+
+ wan-yellow {
+ label = "wndr4700:yellow:wan";
+ gpios = <&GPIO0 3 0>;
+ };
+
+ wan-green {
+ label = "wndr4700:green:wan";
+ gpios = <&GPIO0 12 0>;
+ };
+
+ hd-green {
+ label = "wndr4700:green:hd";
+ gpios = <&GPIO0 14 0>;
+ };
+
+ hd-red {
+ label = "wndr4700:red:hd";
+ gpios = <&GPIO0 17 0>;
+ };
+
+ wlan-blue {
+ label = "wndr4700:blue:wlan";
+ gpios = <&GPIO0 18 0>;
+ };
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan0: fan@1b {
+ compatible = "microchip,tc654";
+ reg = <0x1b>;
+ cooling-min-level = <0>;
+ cooling-max-level = <255>;
+ #cooling-cells = <2>; /* min followed by max */
+
+ gpios = <&GPIO0 16 1>; /* fan status */
+ alarm-gpios = <&GPIO0 5 1>; /* fault */
+ interrupt-parent = <&UIC3>;
+ interrupts = <0x16 0x2>; /* fault */
+ };
+
+ temp0: temp@4d {
+ compatible = "gmt,g781";
+ reg = <0x4d>;
+ #thermal-sensor-cells = <1>;
+
+ /*
+ * The LM90 has two sensors:
+ * temp0 -> internal to LM90
+ * temp1 -> external NTC near CPU
+ */
+ };
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <0xef600800 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+ reg = <0xef601500 0x00000008>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600c00 {
+ device_type = "network";
+ compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600c00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <16384>;
+ tx-fifo-size = <2048>;
+ fifo-entry-size = <10>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x0010 0x40000000
+ 0x0624 0x007f7f7f
+ 0x0004 0x07a00000 /* PAD0_MODE */
+ 0x000c 0x01000000 /* PAD6_MODE */
+ 0x007c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+ };
+ };
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <0x40 0x7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+ };
+
+ MSI: ppc4xx-msi@C10000000 {
+ compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+ reg = < 0xC 0x10000000 0x100
+ 0xC 0x10000000 0x100>;
+ sdr-base = <0x36C>;
+ msi-data = <0x00004440>;
+ msi-mask = <0x0000ffe0>;
+ interrupts =<0 1 2 3 4 5 6 7>;
+ interrupt-parent = <&MSI>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ msi-available-ranges = <0x0 0x100>;
+ interrupt-map = <
+ 0 &UIC3 0x18 1
+ 1 &UIC3 0x19 1
+ 2 &UIC3 0x1A 1
+ 3 &UIC3 0x1B 1
+ 4 &UIC3 0x1C 1
+ 5 &UIC3 0x1D 1
+ 6 &UIC3 0x1E 1
+ 7 &UIC3 0x1F 1
+ >;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <10000>; /* milliseconds */
+ polling-delay = <20000>; /* milliseconds */
+
+ thermal-sensors = <&temp0 1>;
+
+ trips {
+ /*
+ * Once the thermal governers are a bit smarter
+ * and do hysteresis properly, we can disable
+ * the fan when the HDD and CPU has < 39 C.
+ */
+ cpu_alert0: cpu-alert0 {
+ temperature = <25000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_alert1: cpu-alert1 {
+ temperature = <27000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert2: cpu-alert2 {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert3: cpu-alert3 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert4: cpu-alert4 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert5: cpu-alert5 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert6: cpu-alert6 {
+ temperature = <850000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 THERMAL_NO_LIMIT 0>;
+ };
+
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 1 87>;
+ };
+
+ map2 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&fan0 88 100>;
+ };
+
+ map3 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&fan0 101 147>;
+ };
+
+ map4 {
+ trip = <&cpu_alert4>;
+ cooling-device = <&fan0 148 207>;
+ };
+
+ map5 {
+ trip = <&cpu_alert5>;
+ cooling-device = <&fan0 208 231>;
+ };
+
+ map6 {
+ trip = <&cpu_alert6>;
+ cooling-device =<&fan0 232 THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
diff --git a/target/linux/apm821xx/files/arch/powerpc/platforms/44x/wndr4700.c b/target/linux/apm821xx/files/arch/powerpc/platforms/44x/wndr4700.c
new file mode 100644
index 0000000..975ac46
--- /dev/null
+++ b/target/linux/apm821xx/files/arch/powerpc/platforms/44x/wndr4700.c
@@ -0,0 +1,96 @@
+/*
+ * Netgear Centria N900 WNDR4700/WNDR4720 platform support
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * This implemention is based on the simple platform support for the
+ * PowerPC 44x chips.
+ */
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <asm/unaligned.h>
+
+static const struct of_device_id ppc44x_of_bus[] __initconst = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init ppc44x_device_probe(void)
+{
+ of_platform_bus_probe(NULL, ppc44x_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(wndr4700, ppc44x_device_probe);
+
+static char *board[] __initdata = {
+ "netgear,wndr4700",
+};
+
+static int __init ppc44x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ int i = 0;
+
+ pcie_bus_config = PCIE_BUS_PEER2PEER; /* force 128 Byte MPS */
+
+ for (i = 0; i < ARRAY_SIZE(board); i++) {
+ if (of_flat_dt_is_compatible(root, board[i])) {
+ pci_set_flags(PCI_REASSIGN_ALL_RSRC); /* PCI_PROBE_ONLY */
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+define_machine(wndr4700) {
+ .name = "WNDR4700 Platform",
+ .probe = ppc44x_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
+
+static struct ath9k_platform_data ar9380_wmac0_data = {
+ .led_pin = -1,
+ .eeprom_name = "pci_wmac1.eeprom",
+};
+static struct ath9k_platform_data ar9580_wmac1_data = {
+ .led_pin = -1,
+ .eeprom_name = "pci_wmac0.eeprom",
+};
+
+static void load_eeprom_ar9380(struct pci_dev *dev)
+{
+ dev->dev.platform_data = &ar9380_wmac0_data;
+}
+
+static void load_eeprom_ar9580(struct pci_dev *dev)
+{
+ dev->dev.platform_data = &ar9580_wmac1_data;
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, 0x0030, load_eeprom_ar9380);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, 0x0033, load_eeprom_ar9580);
diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile
index 9ba43d9..08173c6 100644
--- a/target/linux/apm821xx/image/Makefile
+++ b/target/linux/apm821xx/image/Makefile
@@ -78,6 +78,88 @@ define Device/mr24
endef
TARGET_DEVICES += mr24
+define Build/create-uImage-dtb
+ # flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
+ -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
+ -O linux -T kernel -C none \
+ -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' \
+ -d $@.dtb $@.new
+ @mv $@.new $@
+endef
+
+define Build/append-fakerootfs
+ rm -rf $@.fakerootsquashfs $@.fakefs
+
+ # append a fake/empty rootfs to fool netgear's uboot
+ # CHECK_DNI_FIRMWARE_ROOTFS_INTEGRITY in do_chk_dniimg()
+ dd if=/dev/zero of=$@.fakerd bs=16 count=1 conv=sync
+
+ -$(STAGING_DIR_HOST)/bin/mkimage \
+ -A $(LINUX_KARCH) -O linux -T filesystem -C none \
+ -a 0x00000000 -e 0x00000000 \
+ -n '$(DEVICE_PROFILE) fakerootfs' \
+ -d $@.fakerd $@.fakefs
+
+ cat $@.fakefs >> $@
+ rm -rf $@.fakerootsquashfs $@.fakefs
+endef
+
+define Build/wndr4700-specialImage
+ rm -rf $@.fakerd $@.new
+
+ dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
+
+ # Netgear used an old uboot that doesn't have FIT support.
+ # So we are stuck with either a full ext2/4 fs in a initrd.
+ # ... or we try to make the "multi" image approach to work
+ # for us.
+ #
+ # Sadly, the "multi" image has to consists of three
+ # "fixed" parts in the following "fixed" order:
+ # 1. The kernel which is in $@
+ # 2. The (fake) initrd which is in $@.fakerd
+ # 3. The device tree binary which is in $@.dtb
+ #
+ # Now, given that we use the function for the kernel which
+ # already has a initramfs image inside, we still have to
+ # add a "fake" initrd (which a mkimage header) in the second
+ # part of the legacy multi image. Since we need to put the
+ # device tree stuff into part 3.
+
+ -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi \
+ -C $(1) -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) \
+ -n '$(DEVICE_PROFILE) initramfs' -d $@:$@.fakerd:$@.dtb $@.new
+ mv $@.new $@
+ rm -rf $@.fakerd
+endef
+
+define Device/WNDR4700
+ DEVICE_TITLE := Netgear Centria N900 WNDR4700/WNDR4720
+ DEVICE_PACKAGES := badblocks block-mount e2fsprogs \
+ kmod-ath9k kmod-dm kmod-fs-ext4 kmod-fs-vfat kmod-ledtrig-usbdev \
+ kmod-md-mod kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-iso8859-15 \
+ kmod-nls-utf8 kmod-usb3 kmod-usb-dwc2 kmod-usb-storage \
+ partx-utils swconfig wpad-mini
+ DEVICE_NAME := wndr4700
+ DEVICE_PROFILE := wndr4700
+ DEVICE_DTS := wndr4700
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ BLOCKSIZE := 131072
+ DTB_SIZE := 131008
+ IMAGE_SIZE:=25559040
+ IMAGES := factory.img sysupgrade.tar
+ KERNEL_SIZE := 1920k
+ KERNEL := kernel-bin | lzma | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | append-fakerootfs
+ KERNEL_INITRAMFS := kernel-bin | gzip | dtb | wndr4700-specialImage gzip
+ IMAGE/factory.img := dtb | create-uImage-dtb | append-kernel | pad-to 2M | append-ubi | \
+ netgear-dni | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.tar := sysupgrade-nand
+ NETGEAR_BOARD_ID := WNDR4700
+ NETGEAR_HW_ID := 29763875+128+256
+endef
+TARGET_DEVICES += WNDR4700
+
endif
ifeq ($(SUBTARGET),sata)
@@ -161,4 +243,3 @@ TARGET_DEVICES += MyBookLiveDuo
endif
$(eval $(call BuildImage))
-
diff --git a/target/linux/apm821xx/nand/config-default b/target/linux/apm821xx/nand/config-default
index 582d129..9c93680 100644
--- a/target/linux/apm821xx/nand/config-default
+++ b/target/linux/apm821xx/nand/config-default
@@ -1,4 +1,32 @@
+CONFIG_AR8216_PHY=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DW_DMAC_CORE=y
+CONFIG_DW_DMAC=y
+# CONFIG_SATA_DWC_OLD_DMA is not set
+# CONFIG_DW_DMAC_PCI is not set
CONFIG_IKAREM=y
+CONFIG_ATA=y
+CONFIG_ATA_SFF=y
+CONFIG_ATA_BMDMA=y
+CONFIG_SATA_PMP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_SATA_DWC=y
+# CONFIG_SATA_DWC_DEBUG is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M48T86=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_OF=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_HWMON=y
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
@@ -7,3 +35,6 @@ CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_TC654=y
+CONFIG_WNDR4700=y
diff --git a/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch b/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch
new file mode 100644
index 0000000..8153191
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch
@@ -0,0 +1,32 @@
+--- a/arch/powerpc/platforms/44x/Makefile 2016-05-31 19:28:28.825973250 +0200
++++ b/arch/powerpc/platforms/44x/Makefile 2016-05-31 19:28:22.135960329 +0200
+@@ -3,6 +3,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
+ obj-$(CONFIG_44x) += idle.o
+ endif
+ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
++obj-$(CONFIG_WNDR4700) += wndr4700.o
+ obj-$(CONFIG_EBONY) += ebony.o
+ obj-$(CONFIG_SAM440EP) += sam440ep.o
+ obj-$(CONFIG_WARP) += warp.o
+--- a/arch/powerpc/platforms/44x/Kconfig 2016-05-31 19:33:57.049940191 +0200
++++ b/arch/powerpc/platforms/44x/Kconfig 2016-05-31 19:30:01.699485861 +0200
+@@ -260,6 +260,19 @@ config ICON
+ help
+ This option enables support for the AMCC PPC440SPe evaluation board.
+
++config WNDR4700
++ bool "WNDR4700"
++ depends on 44x
++ default n
++ select APM821xx
++ select PCI_MSI
++ select PPC4xx_MSI
++ select PPC4xx_PCI_EXPRESS
++ select IBM_EMAC_RGMII
++ select 460EX
++ help
++ This option enables support for the Netgear WNDR4700/WNDR4720 board.
++
+ config XILINX_VIRTEX440_GENERIC_BOARD
+ bool "Generic Xilinx Virtex 5 FXT board support"
+ depends on 44x
diff --git a/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch
new file mode 100644
index 0000000..b44f8bb
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch
@@ -0,0 +1,14 @@
+--- a/arch/powerpc/sysdev/ppc4xx_pci.c 2016-05-30 17:57:30.125498459 +0200
++++ b/arch/powerpc/sysdev/ppc4xx_pci.c 2016-05-30 18:00:39.236007798 +0200
+@@ -1913,9 +1913,9 @@ static void __init ppc4xx_configure_pcie
+ * if it works
+ */
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
++ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
++ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
diff --git a/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch b/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch
new file mode 100644
index 0000000..a1ca7c6
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch
@@ -0,0 +1,335 @@
+From 59b394d0d2b2e11687e757820c52d6470d15a9c5 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Mon, 13 Jun 2016 15:42:21 +0200
+Subject: [PATCH] phy device tree support for emac
+
+---
+ drivers/net/ethernet/ibm/emac/core.c | 261 +++++++++++++++++++++++++++++++++++
+ drivers/net/ethernet/ibm/emac/core.h | 4 +
+ 2 files changed, 265 insertions(+)
+
+diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
+index 4c9771d..5a8a26c 100644
+--- a/drivers/net/ethernet/ibm/emac/core.c
++++ b/drivers/net/ethernet/ibm/emac/core.c
+@@ -42,6 +42,7 @@
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
+ #include <linux/of_net.h>
++#include <linux/of_mdio.h>
+ #include <linux/slab.h>
+
+ #include <asm/processor.h>
+@@ -2383,6 +2384,246 @@ static int emac_read_uint_prop(struct device_node *np, const char *name,
+ return 0;
+ }
+
++static void emac_adjust_link(struct net_device *ndev)
++{
++ struct emac_instance *dev = netdev_priv(ndev);
++ struct phy_device *phy = dev->phy_dev;
++
++ dev->phy.autoneg = phy->autoneg;
++ dev->phy.speed = phy->speed;
++ dev->phy.duplex = phy->duplex;
++ dev->phy.pause = phy->pause;
++ dev->phy.asym_pause = phy->asym_pause;
++ dev->phy.advertising = phy->advertising;
++}
++
++static int emac_mii_bus_read(struct mii_bus *bus, int addr, int regnum)
++{
++ return emac_mdio_read(bus->priv, addr, regnum);
++}
++
++static int emac_mii_bus_write(struct mii_bus *bus, int addr, int regnum, u16 val)
++{
++ emac_mdio_write(bus->priv, addr, regnum, val);
++ return 0;
++}
++
++static int emac_mii_bus_reset(struct mii_bus *bus)
++{
++ struct emac_instance *dev = netdev_priv(bus->priv);
++
++ emac_mii_reset_phy(&dev->phy);
++ return 0;
++}
++
++static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++
++ dev->phy.autoneg = AUTONEG_ENABLE;
++ dev->phy.speed = SPEED_1000;
++ dev->phy.duplex = DUPLEX_FULL;
++ dev->phy.advertising = advertise;
++ phy->autoneg = AUTONEG_ENABLE;
++ phy->speed = dev->phy.speed;
++ phy->duplex = dev->phy.duplex;
++ phy->advertising = advertise;
++ return phy_start_aneg(dev->phy_dev);
++}
++
++static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++
++ dev->phy.autoneg = AUTONEG_DISABLE;
++ dev->phy.speed = speed;
++ dev->phy.duplex = fd;
++ phy->autoneg = AUTONEG_DISABLE;
++ phy->speed = speed;
++ phy->duplex = fd;
++ return phy_start_aneg(dev->phy_dev);
++}
++
++static int emac_mdio_poll_link(struct mii_phy *phy)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++ int res;
++
++ res = phy_read_status(dev->phy_dev);
++ if (res) {
++ dev_err(&dev->ndev->dev, "link update failed (%d).", res);
++ return ethtool_op_get_link(ndev);
++ }
++
++ return dev->phy_dev->link;
++}
++
++static int emac_mdio_read_link(struct mii_phy *phy)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++ int res;
++
++ res = phy_read_status(dev->phy_dev);
++ if (res)
++ return res;
++
++ dev->phy.speed = phy->speed;
++ dev->phy.duplex = phy->duplex;
++ dev->phy.pause = phy->pause;
++ dev->phy.asym_pause = phy->asym_pause;
++ return 0;
++}
++
++static int emac_mdio_init_phy(struct mii_phy *phy)
++{
++ struct net_device *ndev = phy->dev;
++ struct emac_instance *dev = netdev_priv(ndev);
++
++ phy_start(dev->phy_dev);
++ dev->phy.autoneg = phy->autoneg;
++ dev->phy.speed = phy->speed;
++ dev->phy.duplex = phy->duplex;
++ dev->phy.advertising = phy->advertising;
++ dev->phy.pause = phy->pause;
++ dev->phy.asym_pause = phy->asym_pause;
++
++ return phy_init_hw(dev->phy_dev);
++}
++
++static const struct mii_phy_ops emac_dt_mdio_phy_ops = {
++ .init = emac_mdio_init_phy,
++ .setup_aneg = emac_mdio_setup_aneg,
++ .setup_forced = emac_mdio_setup_forced,
++ .poll_link = emac_mdio_poll_link,
++ .read_link = emac_mdio_read_link,
++};
++
++static void emac_dt_phy_mdio_cleanup(struct emac_instance *dev)
++{
++ if (dev->mii_bus) {
++ if (dev->mii_bus->state == MDIOBUS_REGISTERED)
++ mdiobus_unregister(dev->mii_bus);
++ mdiobus_free(dev->mii_bus);
++ dev->mii_bus = NULL;
++ }
++ kfree(dev->phy.def);
++ dev->phy.def = NULL;
++}
++
++static int emac_dt_mdio_probe(struct emac_instance *dev)
++{
++ struct device_node *mii_np;
++ int res;
++
++ mii_np = of_get_child_by_name(dev->ofdev->dev.of_node, "mdio");
++ if (!mii_np) {
++ dev_err(&dev->ndev->dev, "no mdio definition found.");
++ return -ENODEV;
++ }
++
++ if (!of_device_is_available(mii_np)) {
++ res = 1;
++ goto err_put_node;
++ }
++
++ dev->mii_bus = mdiobus_alloc();
++ if (!dev->mii_bus) {
++ res = -ENOMEM;
++ goto err_cleanup_mdio;
++ }
++
++ dev->mii_bus->priv = dev->ndev;
++ dev->mii_bus->parent = dev->ndev->dev.parent;
++ dev->mii_bus->name = "emac_mdio";
++ dev->mii_bus->read = &emac_mii_bus_read;
++ dev->mii_bus->write = &emac_mii_bus_write;
++ dev->mii_bus->reset = &emac_mii_bus_reset;
++ snprintf(dev->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev->mii_bus->name);
++
++ res = of_mdiobus_register(dev->mii_bus, mii_np);
++ if (res) {
++ dev_err(&dev->ndev->dev, "cannot register MDIO bus %s (%d)",
++ dev->mii_bus->name, res);
++ goto err_cleanup_mdio;
++ }
++ of_node_put(mii_np);
++ return 0;
++
++ err_cleanup_mdio:
++ emac_dt_phy_mdio_cleanup(dev);
++ err_put_node:
++ of_node_put(mii_np);
++ return res;
++}
++
++static int emac_dt_phy_probe(struct emac_instance *dev,
++ struct device_node *phy_handle)
++{
++ u32 phy_flags = 0;
++ int res;
++
++ res = of_property_read_u32(phy_handle, "phy-flags", &phy_flags);
++ if (res < 0 && res != -EINVAL)
++ return res;
++
++ dev->phy.def = kzalloc(sizeof(*dev->phy.def), GFP_KERNEL);
++ if (!dev->phy.def)
++ return -ENOMEM;
++
++ dev->phy_dev = of_phy_connect(dev->ndev, phy_handle,
++ &emac_adjust_link, phy_flags,
++ PHY_INTERFACE_MODE_RGMII);
++ if (!dev->phy_dev) {
++ dev_err(&dev->ndev->dev, "failed to connect to PHY.");
++ kfree(dev->phy.dev);
++ dev->phy.dev = NULL;
++ return -ENODEV;
++ }
++
++ dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
++ dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
++ dev->phy.def->name = dev->phy_dev->drv->name;
++ dev->phy.def->ops = &emac_dt_mdio_phy_ops;
++ dev->phy.features = dev->phy_dev->supported;
++ dev->phy.address = dev->phy_dev->addr;
++ dev->phy.mode = dev->phy_dev->interface;
++ return 0;
++}
++
++static int emac_probe_dt_phy(struct emac_instance *dev)
++{
++ struct device_node *np = dev->ofdev->dev.of_node;
++ struct device_node *phy_handle;
++ int res = 0;
++
++ phy_handle = of_parse_phandle(np, "phy-handle", 0);
++
++ if (phy_handle) {
++ res = emac_dt_mdio_probe(dev);
++ if (res)
++ goto out;
++
++ res = emac_dt_phy_probe(dev, phy_handle);
++ if (res) {
++ emac_dt_phy_mdio_cleanup(dev);
++ goto out;
++ }
++
++ return 1;
++ }
++
++ out:
++ of_node_put(phy_handle);
++ /* if no phy device was specifie in the device tree, then we fallback
++ * to the old emac_phy.c probe code for compatibility reasons.
++ */
++ return res;
++}
++
+ static int emac_init_phy(struct emac_instance *dev)
+ {
+ struct device_node *np = dev->ofdev->dev.of_node;
+@@ -2453,6 +2694,18 @@ static int emac_init_phy(struct emac_instance *dev)
+
+ emac_configure(dev);
+
++ if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
++ int res = emac_probe_dt_phy(dev);
++
++ if (res == 1)
++ goto init_phy;
++ if (res < 0)
++ dev_err(&dev->ndev->dev, "failed to attach dt phy (%d).",
++ res);
++
++ /* continue with old code */
++ }
++
+ if (dev->phy_address != 0xffffffff)
+ phy_map = ~(1 << dev->phy_address);
+
+@@ -2480,6 +2733,7 @@ static int emac_init_phy(struct emac_instance *dev)
+ return -ENXIO;
+ }
+
++ init_phy:
+ /* Init PHY */
+ if (dev->phy.def->ops->init)
+ dev->phy.def->ops->init(&dev->phy);
+@@ -2898,6 +3152,8 @@ static int emac_probe(struct platform_device *ofdev)
+ /* I have a bad feeling about this ... */
+
+ err_detach_tah:
++ emac_dt_phy_mdio_cleanup(dev);
++
+ if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
+ tah_detach(dev->tah_dev, dev->tah_port);
+ err_detach_rgmii:
+@@ -2948,6 +3204,11 @@ static int emac_remove(struct platform_device *ofdev)
+ if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
+ zmii_detach(dev->zmii_dev, dev->zmii_port);
+
++ if (dev->phy_dev)
++ phy_disconnect(dev->phy_dev);
++
++ emac_dt_phy_mdio_cleanup(dev);
++
+ busy_phy_map &= ~(1 << dev->phy.address);
+ DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
+
+diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h
+index 93ae114..0710a66 100644
+--- a/drivers/net/ethernet/ibm/emac/core.h
++++ b/drivers/net/ethernet/ibm/emac/core.h
+@@ -199,6 +199,10 @@ struct emac_instance {
+ struct emac_instance *mdio_instance;
+ struct mutex mdio_lock;
+
++ /* Device-tree based phy configuration */
++ struct mii_bus *mii_bus;
++ struct phy_device *phy_dev;
++
+ /* ZMII infos if any */
+ u32 zmii_ph;
+ u32 zmii_port;
+--
+2.1.4
+
diff --git a/target/linux/apm821xx/patches-4.4/800-usb-dwc2-add-wndr4700-otg.patch b/target/linux/apm821xx/patches-4.4/800-usb-dwc2-add-wndr4700-otg.patch
new file mode 100644
index 0000000..24d267e
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.4/800-usb-dwc2-add-wndr4700-otg.patch
@@ -0,0 +1,48 @@
+--- a/drivers/usb/dwc2/platform.c 2016-05-26 21:39:41.347838639 +0200
++++ b/drivers/usb/dwc2/platform.c 2016-05-26 21:44:01.554907417 +0200
+@@ -115,6 +115,37 @@ static const struct dwc2_core_params par
+ .hibernation = -1,
+ };
+
++static const struct dwc2_core_params params_wndr4700 = {
++ .otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE,
++ .otg_ver = -1,
++ .dma_enable = -1,
++ .dma_desc_enable = -1,
++ .speed = -1,
++ .enable_dynamic_fifo = -1,
++ .en_multiple_tx_fifo = -1,
++ .host_rx_fifo_size = -1,
++ .host_nperio_tx_fifo_size = -1,
++ .host_perio_tx_fifo_size = -1,
++ .max_transfer_size = -1,
++ .max_packet_count = -1,
++ .host_channels = -1,
++ .phy_type = -1,
++ .phy_utmi_width = -1,
++ .phy_ulpi_ddr = -1,
++ .phy_ulpi_ext_vbus = -1,
++ .i2c_enable = -1,
++ .ulpi_fs_ls = -1,
++ .host_support_fs_ls_low_power = -1,
++ .host_ls_low_power_phy_clk = -1,
++ .ts_dline = -1,
++ .reload_ctl = -1,
++ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
++ GAHBCFG_HBSTLEN_SHIFT,
++ .uframe_sched = -1,
++ .external_id_pin_ctl = -1,
++ .hibernation = -1,
++};
++
+ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
+ {
+ struct platform_device *pdev = to_platform_device(hsotg->dev);
+@@ -309,6 +340,7 @@ static int dwc2_driver_remove(struct pla
+ static const struct of_device_id dwc2_of_match_table[] = {
+ { .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+ { .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
++ { .compatible = "netgear,wndr4700-usb", .data = &params_wndr4700 },
+ { .compatible = "snps,dwc2", .data = NULL },
+ { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+ {},
diff --git a/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
new file mode 100644
index 0000000..e56e955
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
@@ -0,0 +1,550 @@
+From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Thu, 2 Jun 2016 00:48:46 +0200
+Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
+ w/o ROM
+
+This patch adds a firmware loader for the uPD720201K8-711-BAC-A
+and uPD720202K8-711-BAA-A variant. Both of these chips are listed
+in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
+devices which need the firmware loader on page 2 in order to
+work as they "do not support the External ROM".
+
+The "Firmware Download Sequence" is describe in chapter
+"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
+
+The firmware "K2013080.mem" is available from a USB3.0 Host to
+PCIe Adapter (PP2U-E card) "Firmware download" archive. An
+alternative version can be sourced from Netgear's WNDR4700 GPL
+archives.
+
+The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
+(2012-06-15) state that the firmware is for the following devices:
+ - uPD720201 ES 2.0 sample whose revision ID is 2.
+ - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
+ - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
+
+If someone from Renesas is listening: It would be great, if these
+firmwares could be added to linux-firmware.git.
+
+Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
+---
+ drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 492 insertions(+)
+
+diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
+index 48672fa..328c891 100644
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -24,6 +24,8 @@
+ #include <linux/slab.h>
+ #include <linux/module.h>
+ #include <linux/acpi.h>
++#include <linux/firmware.h>
++#include <asm/unaligned.h>
+
+ #include "xhci.h"
+ #include "xhci-trace.h"
+@@ -207,6 +209,458 @@ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
+ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+ #endif /* CONFIG_ACPI */
+
++static const struct renesas_fw_entry {
++ const char *firmware_name;
++ u16 device;
++ u8 revision;
++ u16 expected_version;
++} renesas_fw_table[] = {
++ /*
++ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
++ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
++ * need the software loader.
++ *
++ * PP2U/ReleaseNote_USB3-201-202-FW.txt:
++ *
++ * Note: This firmware is for the following devices.
++ * - uPD720201 ES 2.0 sample whose revision ID is 2.
++ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
++ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
++ */
++ { "K2013080.mem", 0x0014, 0x02, 0x2013 },
++ { "K2013080.mem", 0x0014, 0x03, 0x2013 },
++ { "K2013080.mem", 0x0015, 0x02, 0x2013 },
++};
++
++static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
++{
++ const struct renesas_fw_entry *entry;
++ size_t i;
++
++ /* This loader will only work with a RENESAS device. */
++ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
++ return NULL;
++
++ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
++ entry = &renesas_fw_table[i];
++ if (entry->device == dev->device &&
++ entry->revision == dev->revision)
++ return entry;
++ }
++
++ return NULL;
++}
++
++static int renesas_fw_download_image(struct pci_dev *dev,
++ const u32 *fw,
++ size_t step)
++{
++ size_t i;
++ int err;
++ u8 fw_status;
++ bool data0_or_data1;
++
++ /*
++ * The hardware does alternate between two 32-bit pages.
++ * (This is because each row of the firmware is 8 bytes).
++ *
++ * for even steps we use DATA0, for odd steps DATA1.
++ */
++ data0_or_data1 = (step & 1) == 1;
++
++ /* step+1. Read "Set DATAX" and confirm it is cleared. */
++ for (i = 0; i < 10000; i++) {
++ err = pci_read_config_byte(dev, 0xF5, &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (!(fw_status & BIT(data0_or_data1)))
++ break;
++
++ udelay(1);
++ }
++ if (i == 10000)
++ return -ETIMEDOUT;
++
++ /*
++ * step+2. Write FW data to "DATAX".
++ * "LSB is left" => force little endian
++ */
++ err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
++ (__force u32) cpu_to_le32(fw[step]));
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ udelay(100);
++
++ /* step+3. Set "Set DATAX". */
++ err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ return 0;
++}
++
++static int renesas_fw_verify(struct pci_dev *dev,
++ const void *fw_data,
++ size_t length)
++{
++ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
++ u16 fw_version_pointer;
++ u16 fw_version;
++
++ if (!entry)
++ return -EINVAL;
++
++ /*
++ * The Firmware's Data Format is describe in
++ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
++ */
++
++ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
++ if (length % 8 != 0) {
++ dev_err(&dev->dev, "firmware size is not a multipe of 8.");
++ return -EINVAL;
++ }
++
++ /*
++ * The bootrom chips of the big brother have sizes up to 64k, let's
++ * assume that's the biggest the firmware can get.
++ */
++ if (length < 0x1000 || length >= 0x10000) {
++ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
++ length);
++ return -EINVAL;
++ }
++
++ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
++ if (get_unaligned_le16(fw_data) != 0x55aa) {
++ dev_err(&dev->dev, "no valid firmware header found.");
++ return -EINVAL;
++ }
++
++ /* verify the firmware version position and print it. */
++ fw_version_pointer = get_unaligned_le16(fw_data + 4);
++ if (fw_version_pointer + 2 >= length) {
++ dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
++ return -EINVAL;
++ }
++
++ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
++ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
++
++ if (fw_version != entry->expected_version) {
++ dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
++ entry->expected_version);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int renesas_fw_check_running(struct pci_dev *pdev)
++{
++ int err;
++ u8 fw_state;
++
++ /*
++ * Test if the device is actually needing the firmware. As most
++ * BIOSes will initialize the device for us. If the device is
++ * initialized.
++ */
++ err = pci_read_config_byte(pdev, 0xF4, &fw_state);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /*
++ * Check if "FW Download Lock" is locked. If it is and the FW is
++ * ready we can simply continue. If the FW is not ready, we have
++ * to give up.
++ */
++ if (fw_state & BIT(1)) {
++ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
++
++ if (fw_state & BIT(4))
++ return 0;
++
++ dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
++ return -EIO;
++ }
++
++ /*
++ * Check if "FW Download Enable" is set. If someone (us?) tampered
++ * with it and it can't be resetted, we have to give up too... and
++ * ask for a forgiveness and a reboot.
++ */
++ if (fw_state & BIT(0)) {
++ dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
++ return -EIO;
++ }
++
++ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
++ switch ((fw_state & 0x70)) {
++ case 0: /* No result yet */
++ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
++
++ /* tell the caller, that this device needs the firmware. */
++ return 1;
++
++ case BIT(4): /* Success, device should be working. */
++ dev_dbg(&pdev->dev, "FW is ready.");
++ return 0;
++
++ case BIT(5): /* Error State */
++ dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
++ return -ENODEV;
++
++ default: /* All other states are marked as "Reserved states" */
++ dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
++ (fw_state & 0x70) >> 4);
++ return -EINVAL;
++ }
++}
++
++static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
++{
++#if 0
++ u32 val;
++
++ /*
++ * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
++ * 'RUN/STOP' of USBCMD Register is set"
++ */
++ val = readl(hcd->regs + 0x20);
++ if (val & BIT(0)) {
++ dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
++ return -EBUSY;
++ }
++#endif
++ return 0;
++}
++
++static int renesas_fw_download(struct pci_dev *pdev,
++ const struct firmware *fw, unsigned int retry_counter)
++{
++ const u32 *fw_data = (const u32 *) fw->data;
++ size_t i;
++ int err;
++ u8 fw_status;
++
++ /*
++ * For more information and the big picture: please look at the
++ * "Firmware Download Sequence" in "7.1 FW Download Interface"
++ * of R19UH0078EJ0500 Rev.5.00 page 131
++ */
++ err = renesas_hw_check_run_stop_busy(pdev);
++ if (err)
++ return err;
++
++ /*
++ * 0. Set "FW Download Enable" bit in the
++ * "FW Download Control & Status Register" at 0xF4
++ */
++ err = pci_write_config_byte(pdev, 0xF4, BIT(0));
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /* 1 - 10 follow one step after the other. */
++ for (i = 0; i < fw->size / 4; i++) {
++ err = renesas_fw_download_image(pdev, fw_data, i);
++ if (err) {
++ dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
++ i, i * 4, err);
++ return err;
++ }
++ }
++
++ /*
++ * This sequence continues until the last data is written to
++ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
++ * is cleared by the hardware beforehand.
++ */
++ for (i = 0; i < 10000; i++) {
++ err = pci_read_config_byte(pdev, 0xF5, &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (!(fw_status & (BIT(0) | BIT(1))))
++ break;
++
++ udelay(1);
++ }
++ if (i == 10000)
++ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
++
++ /*
++ * 11. After finishing writing the last data of FW, the
++ * System Software must clear "FW Download Enable"
++ */
++ err = pci_write_config_byte(pdev, 0xF4, 0);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /* 12. Read "Result Code" and confirm it is good. */
++ for (i = 0; i < 10000; i++) {
++ err = pci_read_config_byte(pdev, 0xF4, &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (fw_status & BIT(4))
++ break;
++
++ udelay(1);
++ }
++ if (i == 10000) {
++ /* Timed out / Error - let's see if we can fix this */
++ err = renesas_fw_check_running(pdev);
++ switch (err) {
++ case 0: /*
++ * we shouldn't end up here.
++ * maybe it took a little bit longer.
++ * But all should be well?
++ */
++ break;
++
++ case 1: /* (No result yet? - we can try to retry) */
++ if (retry_counter < 10) {
++ retry_counter++;
++ dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
++ retry_counter);
++ return renesas_fw_download(pdev, fw,
++ retry_counter);
++ }
++ return -ETIMEDOUT;
++
++ default:
++ return err;
++ }
++ }
++ /*
++ * Optional last step: Engage Firmware Lock
++ *
++ * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
++ * if (err)
++ * return pcibios_err_to_errno(err);
++ */
++
++ return 0;
++}
++
++struct renesas_fw_ctx {
++ struct pci_dev *pdev;
++ const struct pci_device_id *id;
++ bool resume;
++};
++
++static int xhci_pci_probe(struct pci_dev *pdev,
++ const struct pci_device_id *id);
++
++static void renesas_fw_callback(const struct firmware *fw,
++ void *context)
++{
++ struct renesas_fw_ctx *ctx = context;
++ struct pci_dev *pdev = ctx->pdev;
++ struct device *parent = pdev->dev.parent;
++ int err = -ENOENT;
++
++ if (fw) {
++ err = renesas_fw_verify(pdev, fw->data, fw->size);
++ if (!err) {
++ err = renesas_fw_download(pdev, fw, 0);
++ release_firmware(fw);
++ if (!err) {
++ if (ctx->resume)
++ return;
++
++ err = xhci_pci_probe(pdev, ctx->id);
++ if (!err) {
++ /* everything worked */
++ devm_kfree(&pdev->dev, ctx);
++ return;
++ }
++
++ /* in case of an error - fall through */
++ } else {
++ dev_err(&pdev->dev, "firmware failed to download (%d).",
++ err);
++ }
++ }
++ } else {
++ dev_err(&pdev->dev, "firmware failed to load (%d).", err);
++ }
++
++ dev_info(&pdev->dev, "Unloading driver");
++
++ if (parent)
++ device_lock(parent);
++
++ device_release_driver(&pdev->dev);
++
++ if (parent)
++ device_unlock(parent);
++
++ pci_dev_put(pdev);
++}
++
++static int renesas_fw_alive_check(struct pci_dev *pdev)
++{
++ const struct renesas_fw_entry *entry;
++ int err;
++
++ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
++ entry = renesas_needs_fw_dl(pdev);
++ if (!entry)
++ return 0;
++
++ err = renesas_fw_check_running(pdev);
++ /* Also go ahead, if the firmware is running */
++ if (err == 0)
++ return 0;
++
++ /* At this point, we can be sure that the FW isn't ready. */
++ return err;
++}
++
++static int renesas_fw_download_to_hw(struct pci_dev *pdev,
++ const struct pci_device_id *id,
++ bool do_resume)
++{
++ const struct renesas_fw_entry *entry;
++ struct renesas_fw_ctx *ctx;
++ int err;
++
++ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
++ entry = renesas_needs_fw_dl(pdev);
++ if (!entry)
++ return 0;
++
++ err = renesas_fw_check_running(pdev);
++ /* Continue ahead, if the firmware is already running. */
++ if (err == 0)
++ return 0;
++
++ if (err != 1)
++ return err;
++
++ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
++ if (!ctx)
++ return -ENOMEM;
++ ctx->pdev = pdev;
++ ctx->resume = do_resume;
++ ctx->id = id;
++
++ pci_dev_get(pdev);
++ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
++ &pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
++ if (err) {
++ pci_dev_put(pdev);
++ return err;
++ }
++
++ /*
++ * The renesas_fw_callback() callback will continue the probe
++ * process, once it aquires the firmware.
++ */
++ return 1;
++}
++
+ /* called during probe() after chip reset completes */
+ static int xhci_pci_setup(struct usb_hcd *hcd)
+ {
+@@ -246,6 +700,22 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+ struct hc_driver *driver;
+ struct usb_hcd *hcd;
+
++ /*
++ * Check if this device is a RENESAS uPD720201/2 device.
++ * Otherwise, we can continue with xhci_pci_probe as usual.
++ */
++ retval = renesas_fw_download_to_hw(dev, id, false);
++ switch (retval) {
++ case 0:
++ break;
++
++ case 1: /* let it load the firmware and recontinue the probe. */
++ return 0;
++
++ default:
++ return retval;
++ };
++
+ driver = (struct hc_driver *)id->driver_data;
+
+ /* Prevent runtime suspending between USB-2 and USB-3 initialization */
+@@ -303,6 +773,16 @@ static void xhci_pci_remove(struct pci_dev *dev)
+ {
+ struct xhci_hcd *xhci;
+
++ if (renesas_fw_alive_check(dev)) {
++ /*
++ * bail out early, if this was a renesas device w/o FW.
++ * Else we might hit the NMI watchdog in xhci_handsake
++ * during xhci_reset as part of the driver's unloading.
++ * which we forced in the renesas_fw_callback().
++ */
++ return;
++ }
++
+ xhci = hcd_to_xhci(pci_get_drvdata(dev));
+ xhci->xhc_state |= XHCI_STATE_REMOVING;
+ if (xhci->shared_hcd) {
+--
+2.8.1
+
diff --git a/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch
new file mode 100644
index 0000000..a09e9dc
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch
@@ -0,0 +1,57 @@
+From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Thu, 23 Jun 2016 20:28:20 +0200
+Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
+ uPD720202
+
+The APM82181 does not support MSI-X. When probed, it will
+produce a noisy warning.
+
+---
+ drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 362 insertions(+)
+
+diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
+index 1c4d89e..555bd3f 100644
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -172,7 +172,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
+ }
+ if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+ pdev->device == 0x0015)
+- xhci->quirks |= XHCI_RESET_ON_RESUME;
++ xhci->quirks |= XHCI_RESET_ON_RESUME | XHCI_FORCE_MSI;
+ if (pdev->vendor == PCI_VENDOR_ID_VIA)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+
+diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
+index 9e71c96..27cfcb9 100644
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -389,10 +389,14 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
+ free_irq(hcd->irq, hcd);
+ hcd->irq = 0;
+
+- ret = xhci_setup_msix(xhci);
+- if (ret)
+- /* fall back to msi*/
++ if (xhci->quirks & XHCI_FORCE_MSI) {
+ ret = xhci_setup_msi(xhci);
++ } else {
++ ret = xhci_setup_msix(xhci);
++ if (ret)
++ /* fall back to msi*/
++ ret = xhci_setup_msi(xhci);
++ }
+
+ if (!ret)
+ /* hcd->irq is 0, we have MSI */
+diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
+index 6b085aa..514dc3f 100644
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1649,3 +1649,4 @@ struct xhci_hcd {
+ #define XHCI_BROKEN_STREAMS (1 << 19)
+ #define XHCI_PME_STUCK_QUIRK (1 << 20)
++#define XHCI_FORCE_MSI (1 << 24)
+ unsigned int num_active_eps;