diff options
Diffstat (limited to 'target/linux/ar7/base-files')
| -rw-r--r-- | target/linux/ar7/base-files/etc/config/network | 50 | ||||
| -rw-r--r-- | target/linux/ar7/base-files/etc/diag.sh | 42 | ||||
| -rwxr-xr-x | target/linux/ar7/base-files/etc/init.d/adam2 | 13 | ||||
| -rw-r--r-- | target/linux/ar7/base-files/etc/uci-defaults/02_network | 30 |
4 files changed, 0 insertions, 135 deletions
diff --git a/target/linux/ar7/base-files/etc/config/network b/target/linux/ar7/base-files/etc/config/network deleted file mode 100644 index 968d955..0000000 --- a/target/linux/ar7/base-files/etc/config/network +++ /dev/null @@ -1,50 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option type bridge - option ifname "eth0 eth1 eth0.1 eth0.2" - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - option nat 1 - option ip6assign 60 - -config interface wan6 - option ifname @wan - option proto dhcpv6 - -config globals globals - option ula_prefix auto - -## Example for ATM bridging. -## Useful for PPPoE or IP over ATM. Will create 'nas${unit}' -# -# config atm-bridge -# option unit 0 -# option encaps llc -# option vpi 8 -# option vci 35 -# option payload bridged # some ISPs need this set to 'routed' - - -# config interface wan -## PPPoE: -# option ifname nas0 -# option proto pppoe - -## PPPoA: -# option ifname atm0 -# option proto pppoa -# option encaps llc -# option vpi 8 -# option vci 35 - -## Both: -# option username "my_username" -# option password "my_password" diff --git a/target/linux/ar7/base-files/etc/diag.sh b/target/linux/ar7/base-files/etc/diag.sh deleted file mode 100644 index 37eed6a..0000000 --- a/target/linux/ar7/base-files/etc/diag.sh +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# Copyright (C) 2007-2013 OpenWrt.org - -# This setup gives us 4.5 distinguishable states: -# -# (1-LED) Solid OFF: Bootloader running, or kernel hung (timer task stalled) -# (1-LED) Solid ON: Kernel hung (timer task stalled) -# (2-LED) Solid RED: Bootloader running, or kernel hung (timer task stalled) -# (2-LED) Solid YELLOW: Kernel hung (timer task stalled) -# 5Hz blink: preinit -# 10Hz blink: failsafe -# (1-LED) Heartbeat: normal operation -# (2-LED) Solid GREEN: normal operation - -. /lib/functions/leds.sh - -get_status_led() { - [ -d "/sys/class/leds/status" ] && status_led="status" - [ -d "/sys/class/leds/power:green" ] && status_led="power:green" -} - -set_state() { - get_status_led - - case "$1" in - preinit) - status_led_set_timer 100 100 - ;; - failsafe) - status_led_set_timer 50 50 - ;; - done) - [ "$status_led" = "status" ] && { - status_led_set_heartbeat - } - [ "$status_led" = "power:green" ] && { - status_led_set_on - led_off "power:red" - } - ;; - esac -} diff --git a/target/linux/ar7/base-files/etc/init.d/adam2 b/target/linux/ar7/base-files/etc/init.d/adam2 deleted file mode 100755 index 6b78627..0000000 --- a/target/linux/ar7/base-files/etc/init.d/adam2 +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh /etc/rc.common -# ADAM2 patcher for Netgear DG834 and compatible -# Copyright (C) 2006 OpenWrt.org - -START=00 -start() { - MD5="$(md5sum /dev/mtdblock0 | awk '{print $1}')" - [ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && { - mtd unlock adam2 - /sbin/adam2patcher /dev/mtdblock0 - } - rm -f /etc/rc.d/S${START}adam2 /etc/init.d/adam2 /sbin/adam2patcher >&- 2>&- -} diff --git a/target/linux/ar7/base-files/etc/uci-defaults/02_network b/target/linux/ar7/base-files/etc/uci-defaults/02_network deleted file mode 100644 index 2d35c56..0000000 --- a/target/linux/ar7/base-files/etc/uci-defaults/02_network +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/sh -if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175A/1:00" -o \ - -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/1:00" ] && \ - [ -x /sbin/swconfig ]; -then - uci batch <<EOF -set network.eth0=switch -set network.eth0.name=eth0 -set network.eth0.reset=1 -set network.eth0.enable_vlan=1 -set network.eth0_1=switch_vlan -set network.eth0_1.device=eth0 -set network.eth0_1.vlan=1 -set network.eth0_1.ports="0 1 2 3 4t" -commit network -EOF - HAS_SWITCH=1 -fi - -if [ -n "$HAS_SWITCH" -o \ - -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/1:00" -o \ - -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/1:10" ]; then - uci batch <<EOF -set network.lan.ifname=eth0.1 -commit network -EOF - HAS_SWITCH=1 -fi - -uci commit network |