diff options
Diffstat (limited to 'target/linux/ar7/patches-3.10/972-cpmac_fixup.patch')
-rw-r--r-- | target/linux/ar7/patches-3.10/972-cpmac_fixup.patch | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch b/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch new file mode 100644 index 0000000..db290b4 --- /dev/null +++ b/target/linux/ar7/patches-3.10/972-cpmac_fixup.patch @@ -0,0 +1,221 @@ +--- a/arch/mips/ar7/platform.c ++++ b/arch/mips/ar7/platform.c +@@ -712,26 +712,23 @@ static int __init ar7_register_devices(v + } + + if (ar7_has_high_cpmac()) { ++ cpmac_get_mac(0, cpmac_high_data.dev_addr); ++ + res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); +- if (!res) { +- cpmac_get_mac(1, cpmac_high_data.dev_addr); ++ if (!res) ++ pr_warning("unable to register fixed phy for cpmac-high: %d\n", res); + +- res = platform_device_register(&cpmac_high); +- if (res) +- pr_warning("unable to register cpmac-high: %d\n", res); +- } else +- pr_warning("unable to add cpmac-high phy: %d\n", res); +- } else ++ res = platform_device_register(&cpmac_high); ++ if (res) ++ pr_warning("unable to register cpmac-high: %d\n", res); ++ cpmac_get_mac(1, cpmac_low_data.dev_addr); ++ } else { + cpmac_low_data.phy_mask = 0xffffffff; +- +- res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); +- if (!res) { + cpmac_get_mac(0, cpmac_low_data.dev_addr); +- res = platform_device_register(&cpmac_low); +- if (res) +- pr_warning("unable to register cpmac-low: %d\n", res); +- } else +- pr_warning("unable to add cpmac-low phy: %d\n", res); ++ } ++ res = platform_device_register(&cpmac_low); ++ if (res) ++ pr_warning("unable to register cpmac-low: %d\n", res); + + detect_leds(); + res = platform_device_register(&ar7_gpio_leds); +--- a/arch/mips/include/asm/mach-ar7/ar7.h ++++ b/arch/mips/include/asm/mach-ar7/ar7.h +@@ -42,6 +42,7 @@ + #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C) + #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) + #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) ++#define AR7_REGS_MII (AR7_REGS_BASE + 0x1a08) + #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) + #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) + #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) +--- a/drivers/net/ethernet/ti/cpmac.c ++++ b/drivers/net/ethernet/ti/cpmac.c +@@ -35,7 +35,6 @@ + #include <linux/skbuff.h> + #include <linux/mii.h> + #include <linux/phy.h> +-#include <linux/phy_fixed.h> + #include <linux/platform_device.h> + #include <linux/dma-mapping.h> + #include <linux/clk.h> +@@ -48,14 +47,11 @@ MODULE_LICENSE("GPL"); + MODULE_ALIAS("platform:cpmac"); + + static int debug_level = 8; +-static int dumb_switch; + +-/* Next 2 are only used in cpmac_probe, so it's pointless to change them */ ++/* Next is only used in cpmac_probe, so it's pointless to change them */ + module_param(debug_level, int, 0444); +-module_param(dumb_switch, int, 0444); + + MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable"); +-MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus"); + + #define CPMAC_VERSION "0.5.2" + /* frame size + 802.1q tag + FCS size */ +@@ -674,9 +670,8 @@ static void cpmac_hw_start(struct net_de + for (i = 0; i < 8; i++) + cpmac_write(priv->regs, CPMAC_MAC_ADDR_LO(i), dev->dev_addr[5]); + cpmac_write(priv->regs, CPMAC_MAC_ADDR_MID, dev->dev_addr[4]); +- cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, dev->dev_addr[0] | +- (dev->dev_addr[1] << 8) | (dev->dev_addr[2] << 16) | +- (dev->dev_addr[3] << 24)); ++ cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, be32_to_cpu(*(u32 *) ++ dev->dev_addr)); + cpmac_write(priv->regs, CPMAC_MAX_LENGTH, CPMAC_SKB_SIZE); + cpmac_write(priv->regs, CPMAC_UNICAST_CLEAR, 0xff); + cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 0xff); +@@ -1120,25 +1115,19 @@ static int cpmac_probe(struct platform_d + + pdata = pdev->dev.platform_data; + +- if (external_switch || dumb_switch) { +- strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */ +- phy_id = pdev->id; +- } else { +- for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { +- if (!(pdata->phy_mask & (1 << phy_id))) +- continue; +- if (!cpmac_mii->phy_map[phy_id]) +- continue; +- strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); +- break; +- } ++ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { ++ if (!(pdata->phy_mask & (1 << phy_id))) ++ continue; ++ if (!cpmac_mii->phy_map[phy_id]) ++ continue; ++ strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); ++ break; + } + +- if (phy_id == PHY_MAX_ADDR) { +- dev_err(&pdev->dev, "no PHY present, falling back " +- "to switch on MDIO bus 0\n"); +- strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */ ++ if (phy_id == PHY_MAX_ADDR && pdev->id == 1) { ++ printk(KERN_ERR "cpmac: No PHY present, using fixed PHY\n"); + phy_id = pdev->id; ++ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); + } + + dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES); +@@ -1174,6 +1163,13 @@ static int cpmac_probe(struct platform_d + snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, + mdio_bus_id, phy_id); + ++ rc = register_netdev(dev); ++ if (rc) { ++ printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, ++ dev->name); ++ goto fail; ++ } ++ + priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link, + PHY_INTERFACE_MODE_MII); + +@@ -1185,13 +1181,6 @@ static int cpmac_probe(struct platform_d + goto fail; + } + +- rc = register_netdev(dev); +- if (rc) { +- printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, +- dev->name); +- goto fail; +- } +- + if (netif_msg_probe(priv)) { + printk(KERN_INFO + "cpmac: device %s (regs: %p, irq: %d, phy: %s, " +@@ -1224,6 +1213,7 @@ int cpmac_init(void) + { + u32 mask; + int i, res; ++ void __iomem *mii_reg; + + cpmac_mii = mdiobus_alloc(); + if (cpmac_mii == NULL) +@@ -1247,31 +1237,51 @@ int cpmac_init(void) + ar7_gpio_disable(26); + ar7_gpio_disable(27); + +- if (!ar7_is_titan()) { ++ if (ar7_is_titan()) { ++ ar7_device_reset(AR7_RESET_BIT_EPHY); ++ ar7_device_reset(TITAN_RESET_BIT_EPHY1); ++ } else { ++ ar7_device_reset(AR7_RESET_BIT_EPHY); + ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); + ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); + } +- ar7_device_reset(AR7_RESET_BIT_EPHY); +- +- if (ar7_is_titan()) +- ar7_device_reset(TITAN_RESET_BIT_EPHY1); + + cpmac_mii->reset(cpmac_mii); + + for (i = 0; i < 300; i++) { + mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE); ++ mask &= ar7_is_titan()? ~(0x80000000 | 0x40000000) : ~(0x80000000); + if (mask) + break; + else + msleep(10); + } + +- mask &= 0x7fffffff; + if (mask & (mask - 1)) { + external_switch = 1; +- mask = 0; ++ if (!ar7_has_high_cpmac()) { ++ if (ar7_is_titan()) { ++ ar7_device_disable(AR7_RESET_BIT_EPHY); ++ ar7_device_disable(TITAN_RESET_BIT_EPHY1); ++ } else ++ ar7_device_disable(AR7_RESET_BIT_EPHY); ++ ++ //Titan remap might be different ++ mii_reg = ioremap(AR7_REGS_MII, 4); ++ if (mii_reg) { ++ writel(readl(mii_reg) | 1, mii_reg); ++ iounmap(mii_reg); ++ } ++ } + } + ++ if (external_switch) ++ printk(KERN_INFO "EXTERNAL SWITCH!!!\n"); ++ else if (mask) ++ printk(KERN_INFO "EXTERNAL PHY!!!\n"); ++ else ++ printk(KERN_INFO "INTERNAL PHY!!!\n"); ++ + if (ar7_is_titan()) + cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000); + else |