diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c new file mode 100644 index 0000000..150a28b --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c @@ -0,0 +1,126 @@ +/* + * WRTnode2Q board support + * + * Copyright (c) 2013 The Linux Foundation. All rights reserved. + * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2015 Kelei <xzmu@wrtnode.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define WRTNODE2Q_GPIO_LED_WLAN 12 +#define WRTNODE2Q_GPIO_LED_WPS 13 +#define WRTNODE2Q_GPIO_LED_STATUS 13 + +#define WRTNODE2Q_GPIO_LED_WAN 4 +#define WRTNODE2Q_GPIO_LED_LAN1 16 +#define WRTNODE2Q_GPIO_LED_LAN2 15 +#define WRTNODE2Q_GPIO_LED_LAN3 14 +#define WRTNODE2Q_GPIO_LED_LAN4 11 + +#define WRTNODE2Q_GPIO_BTN_WPS 17 + +#define WRTNODE2Q_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL (3 * WRTNODE2Q_KEYS_POLL_INTERVAL) + +#define WRTNODE2Q_MAC0_OFFSET 0 +#define WRTNODE2Q_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led wrtnode2q_leds_gpio[] __initdata = { + { + .name = "wrtnode2q:green:status", + .gpio = WRTNODE2Q_GPIO_LED_STATUS, + .active_low = 1, + }, + { + .name = "wrtnode2q:green:wlan", + .gpio = WRTNODE2Q_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wrtnode2q_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL, + .gpio = WRTNODE2Q_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + +static void __init wrtnode2q_gpio_led_setup(void) +{ + ath79_register_leds_gpio(-1, ARRAY_SIZE(wrtnode2q_leds_gpio), + wrtnode2q_leds_gpio); + ath79_register_gpio_keys_polled(-1, WRTNODE2Q_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wrtnode2q_gpio_keys), + wrtnode2q_gpio_keys); +} + +static void __init wrtnode2q_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1f040000); + + ath79_register_m25p80(NULL); + + wrtnode2q_gpio_led_setup(); + + ath79_register_pci(); + ath79_register_usb(); + + ath79_register_wmac(art + WRTNODE2Q_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_mdio(0, 0x0); + ath79_register_mdio(1, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 1); + + /* LAN ports */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_switch_data.phy_poll_mask |= BIT(4); + ath79_switch_data.phy4_mii_en = 1; + ath79_register_eth(1); + + /* WAN port */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(4); + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_WRTNODE2Q, "WRTNODE2Q", "WRTnode2Q board", + wrtnode2q_setup);
\ No newline at end of file |