diff options
Diffstat (limited to 'target/linux/ar71xx/files')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c new file mode 100644 index 0000000..8eecc0e --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c @@ -0,0 +1,222 @@ +/* + * Sitecom X8 AC1750 WLR-8100 board support + * + * Based on the Qualcomm Atheros AP135/AP136 reference board support code + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/platform_device.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WLR8100_GPIO_LED_USB 4 +#define WLR8100_GPIO_LED_WLAN_5G 12 +#define WLR8100_GPIO_LED_WLAN_2G 13 +#define WLR8100_GPIO_LED_STATUS_RED 14 +#define WLR8100_GPIO_LED_WPS_RED 15 +#define WLR8100_GPIO_LED_STATUS_AMBER 19 +#define WLR8100_GPIO_LED_WPS_GREEN 20 + +#define WLR8100_GPIO_BTN_WPS 16 +#define WLR8100_GPIO_BTN_RFKILL 21 + +#define WLR8100_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WLR8100_KEYS_DEBOUNCE_INTERVAL (3 * WLR8100_KEYS_POLL_INTERVAL) + +#define WLR8100_MAC0_OFFSET 0 +#define WLR8100_MAC1_OFFSET 6 +#define WLR8100_WMAC_CALDATA_OFFSET 0x1000 +#define WLR8100_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led wlr8100_leds_gpio[] __initdata = { + { + .name = "wlr8100:amber:status", + .gpio = WLR8100_GPIO_LED_STATUS_AMBER, + .active_low = 1, + }, + { + .name = "wlr8100:red:status", + .gpio = WLR8100_GPIO_LED_STATUS_RED, + .active_low = 1, + }, + { + .name = "wlr8100:green:wps", + .gpio = WLR8100_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, + { + .name = "wlr8100:red:wps", + .gpio = WLR8100_GPIO_LED_WPS_RED, + .active_low = 1, + }, + { + .name = "wlr8100:red:wlan-2g", + .gpio = WLR8100_GPIO_LED_WLAN_2G, + .active_low = 1, + }, + { + .name = "wlr8100:red:usb", + .gpio = WLR8100_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button wlr8100_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL, + .gpio = WLR8100_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL, + .gpio = WLR8100_GPIO_BTN_RFKILL, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg wlr8100_ar8327_pad0_cfg; +static struct ar8327_pad_cfg wlr8100_ar8327_pad6_cfg; + +static struct ar8327_platform_data wlr8100_ar8327_data = { + .pad0_cfg = &wlr8100_ar8327_pad0_cfg, + .pad6_cfg = &wlr8100_ar8327_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .port6_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info wlr8100_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &wlr8100_ar8327_data, + }, +}; + +static void __init wlr8100_gmac_setup(void) +{ + void __iomem *base; + u32 t; + + base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); + + t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); + + t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); + t |= QCA955X_ETH_CFG_RGMII_EN; + + __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); + + iounmap(base); +} + +static void __init wlr8100_common_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wlr8100_leds_gpio), + wlr8100_leds_gpio); + ath79_register_gpio_keys_polled(-1, WLR8100_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wlr8100_gpio_keys), + wlr8100_gpio_keys); + + ath79_register_usb(); + + ath79_register_wmac(art + WLR8100_WMAC_CALDATA_OFFSET, NULL); + + wlr8100_gmac_setup(); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + WLR8100_MAC0_OFFSET, 0); + + mdiobus_register_board_info(wlr8100_mdio0_info, + ARRAY_SIZE(wlr8100_mdio0_info)); + + /* GMAC0 is connected to the RMGII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + + ath79_register_eth(0); + + /* GMAC1 is connected tot eh SGMII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(1); +} + +static void __init wlr8100_010_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */ + wlr8100_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; + wlr8100_ar8327_pad0_cfg.txclk_delay_en = true; + wlr8100_ar8327_pad0_cfg.rxclk_delay_en = true; + wlr8100_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; + wlr8100_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; + + /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */ + wlr8100_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; + wlr8100_ar8327_pad6_cfg.rxclk_delay_en = true; + wlr8100_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; + + ath79_eth0_pll_data.pll_1000 = 0xa6000000; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + wlr8100_common_setup(); + ap91_pci_init(art + WLR8100_PCIE_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(ATH79_MACH_WLR8100, "WLR8100", + "Sitecom WLR-8100", + wlr8100_010_setup); + |