1 files changed, 114 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
new file mode 100644
index 0000000..11006fd
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
@@ -0,0 +1,114 @@
+/*
+ *  Buffalo WLAE-AG300N board support
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WLAEAG300N_MAC_OFFSET		0x20c
+#define WLAEAG300N_KEYS_POLL_INTERVAL	20      /* msecs */
+#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
+	/*
+	 * Note: Writing 1 into GPIO 13 will power down the device.
+	 */
+	{
+		.name		= "buffalo:green:wireless",
+		.gpio		= 14,
+		.active_low	= 1,
+	}, {
+		.name		= "buffalo:red:wireless",
+		.gpio		= 15,
+		.active_low	= 1,
+	}, {
+		.name		= "buffalo:green:status",
+		.gpio		= 16,
+		.active_low	= 1,
+	}, {
+		.name		= "buffalo:red:status",
+		.gpio		= 17,
+		.active_low	= 1,
+	}
+};
+
+
+static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
+	{
+		.desc		= "function",
+		.type		= EV_KEY,
+		.code		= KEY_MODE,
+		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 0,
+		.active_low	= 1,
+	}, {
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 1,
+		.active_low	= 1,
+	}, {
+		.desc		= "power",
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 11,
+		.active_low	= 1,
+	}, {
+		.desc		= "aoss",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 12,
+		.active_low	= 1,
+	}
+};
+
+static void __init wlaeag300n_setup(void)
+{
+	u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
+	u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
+
+	ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
+
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_mask = BIT(0);
+
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth1_data.phy_mask = BIT(4);
+
+	ath79_register_eth(0);
+	ath79_register_eth(1);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
+					wlaeag300n_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
+					 ARRAY_SIZE(wlaeag300n_gpio_keys),
+					 wlaeag300n_gpio_keys);
+
+	ath79_register_m25p80(NULL);
+
+	ap91_pci_init(eeprom1, mac1);
+}
+
+MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
+	     "Buffalo WLAE-AG300N", wlaeag300n_setup);