diff options
Diffstat (limited to 'target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch | 74 |
1 files changed, 51 insertions, 23 deletions
diff --git a/target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch index 07b23da..4f9d00b 100644 --- a/target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch +++ b/target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch @@ -1,14 +1,25 @@ --- a/arch/mips/ath79/mach-db120.c +++ b/arch/mips/ath79/mach-db120.c -@@ -37,17 +37,26 @@ +@@ -2,7 +2,7 @@ + * Atheros DB120 reference board support + * + * Copyright (c) 2011 Qualcomm Atheros +- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * All rights reserved. + * +@@ -37,17 +37,28 @@ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <linux/pci.h> ++#include <linux/phy.h> +#include <linux/platform_device.h> #include <linux/ath9k_platform.h> ++#include <linux/ar8216_platform.h> -#include "machtypes.h" +#include <asm/mach-ath79/ar71xx_regs.h> @@ -29,7 +40,7 @@ #define DB120_GPIO_LED_WLAN_5G 12 #define DB120_GPIO_LED_WLAN_2G 13 #define DB120_GPIO_LED_STATUS 14 -@@ -58,8 +67,50 @@ +@@ -58,8 +69,50 @@ #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) @@ -82,7 +93,7 @@ static struct gpio_led db120_leds_gpio[] __initdata = { { -@@ -82,6 +133,11 @@ static struct gpio_led db120_leds_gpio[] +@@ -82,6 +135,11 @@ static struct gpio_led db120_leds_gpio[] .gpio = DB120_GPIO_LED_WLAN_2G, .active_low = 1, }, @@ -94,15 +105,21 @@ }; static struct gpio_keys_button db120_gpio_keys[] __initdata = { -@@ -95,66 +151,65 @@ static struct gpio_keys_button db120_gpi +@@ -95,66 +153,89 @@ static struct gpio_keys_button db120_gpi }, }; -static struct ath79_spi_controller_data db120_spi0_data = { - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 0, --}; -- ++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = { ++ .mode = AR8327_PAD_MAC_RGMII, ++ .txclk_delay_en = true, ++ .rxclk_delay_en = true, ++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, ++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + }; + -static struct spi_board_info db120_spi_info[] = { - { - .bus_num = 0, @@ -110,14 +127,28 @@ - .max_speed_hz = 25000000, - .modalias = "s25sl064a", - .controller_data = &db120_spi0_data, -- } --}; -- ++static struct ar8327_platform_data db120_ar8327_data = { ++ .pad0_cfg = &db120_ar8327_pad0_cfg, ++ .cpuport_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, + } + }; + -static struct ath79_spi_platform_data db120_spi_data = { - .bus_num = 0, - .num_chipselect = 1, --}; -- ++static struct mdio_board_info db120_mdio0_info[] = { ++ { ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &db120_ar8327_data, ++ }, + }; + -#ifdef CONFIG_PCI -static struct ath9k_platform_data db120_ath9k_data; - @@ -143,6 +174,8 @@ + t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); + t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 | + AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); ++ t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE; ++ + __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); - ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); @@ -174,23 +207,18 @@ + + db120_gmac_setup(); + -+ ath79_register_mdio(0, 0x0); + ath79_register_mdio(1, 0x0); ++ ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); -+#if 0 ++ ++ mdiobus_register_board_info(db120_mdio0_info, ++ ARRAY_SIZE(db120_mdio0_info)); ++ + /* GMAC0 is connected to an AR8327 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.speed = SPEED_1000; -+ ath79_eth0_data.duplex = DUPLEX_FULL; -+#else -+ /* GMAC0 is connected to PHY4 of the internal switch */ -+ ath79_switch_data.phy4_mii_en = 1; -+ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ath79_eth0_data.phy_mask = BIT(4); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; -+#endif ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_register_eth(0); + + /* GMAC1 is connected to the internal switch */ |