diff options
Diffstat (limited to 'target/linux/ar71xx/patches-3.2')
| -rw-r--r-- | target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch | 26 |
1 files changed, 19 insertions, 7 deletions
diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch index d5204cb..e6542a1 100644 --- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,17 +16,80 @@ +@@ -16,17 +16,81 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -18,6 +18,7 @@ ATH79_MACH_PB44, /* Atheros PB44 reference board */ + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ ++ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ + ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ + ATH79_MACH_EAP7660D, /* Senao EAP7660D */ + ATH79_MACH_JA76PF, /* jjPlus JA76PF */ @@ -187,7 +188,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -54,6 +137,369 @@ config ATH79_MACH_PB44 +@@ -54,6 +137,379 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -296,6 +297,16 @@ + select ATH79_DEV_WMAC + select ATH79_NVRAM + ++config ATH79_MACH_DIR_615_E4 ++ bool "D-Link DIR-615 rev. E4 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_NVRAM ++ +config ATH79_MACH_DIR_825_B1 + bool "D-Link DIR-825 rev. B1 board support" + select SOC_AR71XX @@ -557,7 +568,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM (rev 1.0) board" select SOC_AR724X -@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM +@@ -67,6 +523,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -582,7 +593,7 @@ endmenu config SOC_AR71XX -@@ -96,10 +560,6 @@ config SOC_AR934X +@@ -96,10 +570,6 @@ config SOC_AR934X select PCI_AR724X if PCI def_bool n @@ -593,7 +604,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -110,7 +570,14 @@ config ATH79_DEV_DSA +@@ -110,7 +580,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -609,7 +620,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -135,4 +602,7 @@ config ATH79_NVRAM +@@ -135,4 +612,7 @@ config ATH79_NVRAM config ATH79_PCI_ATH9K_FIXUP def_bool n @@ -619,7 +630,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p +@@ -36,8 +36,57 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p # # Machines # @@ -635,6 +646,7 @@ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o +obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o ++obj-$(CONFIG_ATH79_MACH_DIR_615_E4) += mach-dir-615-e4.o +obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o +obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o +obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o |