diff options
Diffstat (limited to 'target/linux/ar71xx')
119 files changed, 0 insertions, 9491 deletions
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 deleted file mode 100644 index 02628ab..0000000 --- a/target/linux/ar71xx/config-3.10 +++ /dev/null @@ -1,302 +0,0 @@ -CONFIG_AG71XX=y -CONFIG_AG71XX_AR8216_SUPPORT=y -# CONFIG_AG71XX_DEBUG is not set -# CONFIG_AG71XX_DEBUG_FS is not set -CONFIG_AR8216_PHY=y -CONFIG_AR8216_PHY_LEDS=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ATH79=y -CONFIG_ATH79_DEV_AP9X_PCI=y -CONFIG_ATH79_DEV_DSA=y -CONFIG_ATH79_DEV_ETH=y -CONFIG_ATH79_DEV_GPIO_BUTTONS=y -CONFIG_ATH79_DEV_LEDS_GPIO=y -CONFIG_ATH79_DEV_M25P80=y -CONFIG_ATH79_DEV_NFC=y -CONFIG_ATH79_DEV_SPI=y -CONFIG_ATH79_DEV_USB=y -CONFIG_ATH79_DEV_WMAC=y -CONFIG_ATH79_MACH_ALFA_AP96=y -CONFIG_ATH79_MACH_ALFA_NX=y -CONFIG_ATH79_MACH_ALL0258N=y -CONFIG_ATH79_MACH_ALL0315N=y -CONFIG_ATH79_MACH_AP113=y -CONFIG_ATH79_MACH_AP121=y -CONFIG_ATH79_MACH_AP132=y -CONFIG_ATH79_MACH_AP136=y -CONFIG_ATH79_MACH_AP81=y -CONFIG_ATH79_MACH_AP83=y -CONFIG_ATH79_MACH_AP96=y -CONFIG_ATH79_MACH_ARCHER_C7=y -CONFIG_ATH79_MACH_AW_NR580=y -CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y -CONFIG_ATH79_MACH_CAP4200AG=y -CONFIG_ATH79_MACH_CARAMBOLA2=y -CONFIG_ATH79_MACH_DB120=y -CONFIG_ATH79_MACH_DHP_1565_A1=y -CONFIG_ATH79_MACH_DIR_505_A1=y -CONFIG_ATH79_MACH_DIR_600_A1=y -CONFIG_ATH79_MACH_DIR_615_C1=y -CONFIG_ATH79_MACH_DIR_825_B1=y -CONFIG_ATH79_MACH_DIR_825_C1=y -CONFIG_ATH79_MACH_DRAGINO2=y -CONFIG_ATH79_MACH_EAP300V2=y -CONFIG_ATH79_MACH_EAP7660D=y -CONFIG_ATH79_MACH_EL_M150=y -CONFIG_ATH79_MACH_EL_MINI=y -CONFIG_ATH79_MACH_ESR1750=y -CONFIG_ATH79_MACH_ESR900=y -CONFIG_ATH79_MACH_EW_DORIN=y -CONFIG_ATH79_MACH_GL_INET=y -CONFIG_ATH79_MACH_GS_OOLITE=y -CONFIG_ATH79_MACH_HIWIFI_HC6361=y -CONFIG_ATH79_MACH_HORNET_UB=y -CONFIG_ATH79_MACH_JA76PF=y -CONFIG_ATH79_MACH_JWAP003=y -CONFIG_ATH79_MACH_MR600=y -CONFIG_ATH79_MACH_MR900=y -CONFIG_ATH79_MACH_MYNET_N600=y -CONFIG_ATH79_MACH_MYNET_N750=y -CONFIG_ATH79_MACH_MYNET_REXT=y -CONFIG_ATH79_MACH_MZK_W04NU=y -CONFIG_ATH79_MACH_MZK_W300NH=y -CONFIG_ATH79_MACH_NBG460N=y -CONFIG_ATH79_MACH_NBG6716=y -CONFIG_ATH79_MACH_OM2P=y -CONFIG_ATH79_MACH_OM5P=y -CONFIG_ATH79_MACH_PB42=y -CONFIG_ATH79_MACH_PB44=y -CONFIG_ATH79_MACH_PB92=y -CONFIG_ATH79_MACH_QIHOO_C301=y -# CONFIG_ATH79_MACH_RB2011 is not set -# CONFIG_ATH79_MACH_RB4XX is not set -# CONFIG_ATH79_MACH_RB750 is not set -# CONFIG_ATH79_MACH_RB91X is not set -# CONFIG_ATH79_MACH_RB95X is not set -# CONFIG_ATH79_MACH_RBSXTLITE is not set -CONFIG_ATH79_MACH_RW2458N=y -CONFIG_ATH79_MACH_SMART_300=y -CONFIG_ATH79_MACH_TEW_632BRP=y -CONFIG_ATH79_MACH_TEW_673GRU=y -CONFIG_ATH79_MACH_TEW_712BR=y -CONFIG_ATH79_MACH_TEW_732BR=y -CONFIG_ATH79_MACH_TL_MR11U=y -CONFIG_ATH79_MACH_TL_MR13U=y -CONFIG_ATH79_MACH_TL_MR3020=y -CONFIG_ATH79_MACH_TL_MR3X20=y -CONFIG_ATH79_MACH_TL_WA830RE_V2=y -CONFIG_ATH79_MACH_TL_WA901ND=y -CONFIG_ATH79_MACH_TL_WA901ND_V2=y -CONFIG_ATH79_MACH_TL_WAX50RE=y -CONFIG_ATH79_MACH_TL_WDR3500=y -CONFIG_ATH79_MACH_TL_WDR4300=y -CONFIG_ATH79_MACH_TL_WR1041N_V2=y -CONFIG_ATH79_MACH_TL_WR1043ND=y -CONFIG_ATH79_MACH_TL_WR1043ND_V2=y -CONFIG_ATH79_MACH_TL_WR2543N=y -CONFIG_ATH79_MACH_TL_WR703N=y -CONFIG_ATH79_MACH_TL_WR720N_V3=y -CONFIG_ATH79_MACH_TL_WR741ND=y -CONFIG_ATH79_MACH_TL_WR741ND_V4=y -CONFIG_ATH79_MACH_TL_WR841N_V1=y -CONFIG_ATH79_MACH_TL_WR841N_V8=y -CONFIG_ATH79_MACH_TL_WR841N_V9=y -CONFIG_ATH79_MACH_TL_WR941ND=y -CONFIG_ATH79_MACH_TUBE2H=y -CONFIG_ATH79_MACH_UBNT=y -CONFIG_ATH79_MACH_UBNT_XM=y -CONFIG_ATH79_MACH_WHR_HP_G300N=y -CONFIG_ATH79_MACH_WLAE_AG300N=y -CONFIG_ATH79_MACH_WLR8100=y -CONFIG_ATH79_MACH_WNDAP360=y -CONFIG_ATH79_MACH_WNDR3700=y -CONFIG_ATH79_MACH_WNDR4300=y -CONFIG_ATH79_MACH_WNR2000=y -CONFIG_ATH79_MACH_WNR2000_V3=y -CONFIG_ATH79_MACH_WNR2000_V4=y -CONFIG_ATH79_MACH_WNR2200=y -CONFIG_ATH79_MACH_WP543=y -CONFIG_ATH79_MACH_WPE72=y -CONFIG_ATH79_MACH_WRT160NL=y -CONFIG_ATH79_MACH_WRT400N=y -CONFIG_ATH79_MACH_WZR_450HP2=y -CONFIG_ATH79_MACH_WZR_HP_AG300H=y -CONFIG_ATH79_MACH_WZR_HP_G300NH=y -CONFIG_ATH79_MACH_WZR_HP_G300NH2=y -CONFIG_ATH79_MACH_WZR_HP_G450H=y -CONFIG_ATH79_MACH_ZCN_1523H=y -CONFIG_ATH79_NVRAM=y -CONFIG_ATH79_PCI_ATH9K_FIXUP=y -# CONFIG_ATH79_ROUTERBOOT is not set -CONFIG_ATH79_WDT=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -# CONFIG_GPIO_LATCH is not set -CONFIG_GPIO_NXP_74HC153=y -CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CLK=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_KVM=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HW_HAS_PCI=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../../root" -CONFIG_IP17XX_PHY=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_WNDR3700_USB is not set -# CONFIG_M25PXX_USE_FAST_READ is not set -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MICREL_PHY=y -CONFIG_MIPS=y -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_M25P80=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_LZMA_FW=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_TPLINK_PARTS=y -CONFIG_MTD_WRT160NL_PARTS=y -CONFIG_MYLOADER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6060=y -CONFIG_NET_DSA_MV88E6063=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_AR724X=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_RCU_STALL_COMMON is not set -CONFIG_RTL8306_PHY=y -CONFIG_RTL8366RB_PHY=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8366_SMI=y -CONFIG_RTL8367_PHY=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_AR933X=y -CONFIG_SERIAL_AR933X_CONSOLE=y -CONFIG_SERIAL_AR933X_NR_UARTS=2 -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SOC_AR71XX=y -CONFIG_SOC_AR724X=y -CONFIG_SOC_AR913X=y -CONFIG_SOC_AR933X=y -CONFIG_SOC_AR934X=y -CONFIG_SOC_QCA953X=y -CONFIG_SOC_QCA955X=y -CONFIG_SPI=y -CONFIG_SPI_AP83=y -CONFIG_SPI_ATH79=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_MASTER=y -# CONFIG_SPI_VSC7385 is not set -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_UIDGID_CONVERTED=y -CONFIG_USB_ARCH_HAS_XHCI=y -CONFIG_USB_SUPPORT=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar71xx/files-3.10/arch/mips/ath79/mach-alfa-ap96.c b/target/linux/ar71xx/files-3.10/arch/mips/ath79/mach-alfa-ap96.c deleted file mode 100644 index 15abb08..0000000 --- a/target/linux/ar71xx/files-3.10/arch/mips/ath79/mach-alfa-ap96.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * ALFA Network AP96 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/mmc/host.h> -#include <linux/spi/spi.h> -#include <linux/spi/mmc_spi.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define ALFA_AP96_GPIO_PCIE_RESET 2 -#define ALFA_AP96_GPIO_SIM_DETECT 3 -#define ALFA_AP96_GPIO_MICROSD_CD 4 -#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5 - -#define ALFA_AP96_GPIO_BUTTON_RESET 11 - -#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALFA_AP96_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static int alfa_ap96_mmc_get_cd(struct device *dev) -{ - return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD); -} - -static struct mmc_spi_platform_data alfa_ap96_mmc_data = { - .get_cd = alfa_ap96_mmc_get_cd, - .caps = MMC_CAP_NEEDS_POLL, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, -}; - -static struct ath79_spi_controller_data ap96_spi0_cdata = { - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 0, - .is_flash = true, -}; - -static struct ath79_spi_controller_data ap96_spi1_cdata = { - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 1, -}; - -static struct ath79_spi_controller_data ap96_spi2_cdata = { - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 2, -}; - -static struct spi_board_info alfa_ap96_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .controller_data = &ap96_spi0_cdata - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "mmc_spi", - .platform_data = &alfa_ap96_mmc_data, - .controller_data = &ap96_spi1_cdata - }, { - .bus_num = 0, - .chip_select = 2, - .max_speed_hz = 6250000, - .modalias = "rtc-pcf2123", - .controller_data = &ap96_spi2_cdata - }, -}; - -static struct ath79_spi_platform_data alfa_ap96_spi_data = { - .bus_num = 0, - .num_chipselect = 3, -}; - -static void __init alfa_ap96_gpio_setup(void) -{ - ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD"); - gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD); - gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset"); - gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1); - gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable"); - gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1); -} - -#define ALFA_AP96_WAN_PHYMASK BIT(4) -#define ALFA_AP96_LAN_PHYMASK BIT(5) -#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK) - -static void __init alfa_ap96_init(void) -{ - alfa_ap96_gpio_setup(); - - ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK; - ath79_eth1_pll_data.pll_1000 = 0x110000; - - ath79_register_eth(0); - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK; - ath79_eth1_pll_data.pll_1000 = 0x110000; - - ath79_register_eth(1); - - ath79_register_pci(); - ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info, - ARRAY_SIZE(alfa_ap96_spi_info)); - - ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL, - ARRAY_SIZE(alfa_ap96_gpio_keys), - alfa_ap96_gpio_keys); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96", - alfa_ap96_init); diff --git a/target/linux/ar71xx/patches-3.10/100-MIPS-ath79-don-t-hardwire-cpu_has_dsp-2-to-0.patch b/target/linux/ar71xx/patches-3.10/100-MIPS-ath79-don-t-hardwire-cpu_has_dsp-2-to-0.patch deleted file mode 100644 index ecced79..0000000 --- a/target/linux/ar71xx/patches-3.10/100-MIPS-ath79-don-t-hardwire-cpu_has_dsp-2-to-0.patch +++ /dev/null @@ -1,31 +0,0 @@ -From c9da75bfa6cd7a47f5b2a1d183d34c165a06dd1a Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 22 Aug 2013 11:15:18 +0200 -Subject: [PATCH] MIPS: ath79: don't hardwire cpu_has_dsp{2} to 0 - -The ath79 code supports various SoCs which are using either a 24Kc -or a 74Kc core. The 74Kc core has DSP support, so don't hardwire -the values to zero. - -Commit 00dc5ce2a653a332190aa29b2e1f3bceaa7d5b8d (MIPS: ath79: don't -hardcode the unavailability of the DSP ASE) has fixed this already, -but that change got reverted by 475032564ed96c94c085e3e7a90e07d150a7cec9 -(MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.) - -Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h | 2 -- - 1 file changed, 2 deletions(-) - ---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -@@ -42,8 +42,6 @@ - #define cpu_has_mips64r1 0 - #define cpu_has_mips64r2 0 - --#define cpu_has_dsp 0 --#define cpu_has_dsp2 0 - #define cpu_has_mipsmt 0 - - #define cpu_has_64bits 0 diff --git a/target/linux/ar71xx/patches-3.10/101-MIPS-ath79-simplify-platform_get_resource_byname-dev.patch b/target/linux/ar71xx/patches-3.10/101-MIPS-ath79-simplify-platform_get_resource_byname-dev.patch deleted file mode 100644 index 04e2a25..0000000 --- a/target/linux/ar71xx/patches-3.10/101-MIPS-ath79-simplify-platform_get_resource_byname-dev.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 59a93f8909b8ab5d61e024e8b3771fdf94a774f0 Mon Sep 17 00:00:00 2001 -From: Julia Lawall <Julia.Lawall@lip6.fr> -Date: Mon, 19 Aug 2013 10:51:56 +0200 -Subject: [PATCH] MIPS: ath79: simplify platform_get_resource_byname/devm_ioremap_resource - -Remove unneeded error handling on the result of a call to -platform_get_resource_byname when the value is passed to devm_ioremap_resource. - -A simplified version of the semantic patch that makes this change is as -follows: (http://coccinelle.lip6.fr/) - -// <smpl> -@@ -expression pdev,res,e,e1; -expression ret != 0; -identifier l; -@@ - - res = platform_get_resource_byname(...); -- if (res == NULL) { ... \(goto l;\|return ret;\) } - e = devm_ioremap_resource(e1, res); -// </smpl> - -Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> -Acked-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/mips/pci/pci-ar71xx.c | 3 --- - arch/mips/pci/pci-ar724x.c | 9 --------- - 2 files changed, 12 deletions(-) - ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -363,9 +363,6 @@ static int ar71xx_pci_probe(struct platf - spin_lock_init(&apc->lock); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); -- if (!res) -- return -EINVAL; -- - apc->cfg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(apc->cfg_base)) - return PTR_ERR(apc->cfg_base); ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -362,25 +362,16 @@ static int ar724x_pci_probe(struct platf - return -ENOMEM; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base"); -- if (!res) -- return -EINVAL; -- - apc->ctrl_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(apc->ctrl_base)) - return PTR_ERR(apc->ctrl_base); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); -- if (!res) -- return -EINVAL; -- - apc->devcfg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(apc->devcfg_base)) - return PTR_ERR(apc->devcfg_base); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base"); -- if (!res) -- return -EINVAL; -- - apc->crp_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(apc->crp_base)) - return PTR_ERR(apc->crp_base); diff --git a/target/linux/ar71xx/patches-3.10/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch b/target/linux/ar71xx/patches-3.10/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch deleted file mode 100644 index 79c7ab0..0000000 --- a/target/linux/ar71xx/patches-3.10/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001 -From: Markos Chandras <markos.chandras@imgtec.com> -Date: Wed, 21 Aug 2013 11:47:22 +0100 -Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable - -Fixes the following build error: -arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used -uninitialized in this function [-Werror=maybe-uninitialized] -arch/mips/ath79/common.c:62:6: note: 'reg' was declared here -In file included from arch/mips/ath79/common.c:20:0: -arch/mips/ath79/common.c: In function 'ath79_device_reset_clear': -arch/mips/include/asm/mach-ath79/ath79.h:139:20: -error: 'reg' may be used uninitialized in this function -[-Werror=maybe-uninitialized] -arch/mips/ath79/common.c:90:6: note: 'reg' was declared here - -Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> -Acked-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/mips/ath79/common.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -75,7 +75,7 @@ void ath79_device_reset_set(u32 mask) - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -- BUG(); -+ panic("Reset register not defined for this SOC"); - - spin_lock_irqsave(&ath79_device_reset_lock, flags); - t = ath79_reset_rr(reg); -@@ -103,7 +103,7 @@ void ath79_device_reset_clear(u32 mask) - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -- BUG(); -+ panic("Reset register not defined for this SOC"); - - spin_lock_irqsave(&ath79_device_reset_lock, flags); - t = ath79_reset_rr(reg); diff --git a/target/linux/ar71xx/patches-3.10/103-tty-ar933x_uart-convert-to-use-devm_-functions.patch b/target/linux/ar71xx/patches-3.10/103-tty-ar933x_uart-convert-to-use-devm_-functions.patch deleted file mode 100644 index fab6f23..0000000 --- a/target/linux/ar71xx/patches-3.10/103-tty-ar933x_uart-convert-to-use-devm_-functions.patch +++ /dev/null @@ -1,72 +0,0 @@ -From f157945cd134e2cfa47ed9bb1f599632d112d94e Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Mon, 29 Jul 2013 19:39:20 +0200 -Subject: [PATCH] tty: ar933x_uart: convert to use devm_* functions - -Use devm_* functions in order to simplify cleanup -paths. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - drivers/tty/serial/ar933x_uart.c | 26 ++++++++------------------ - 1 file changed, 8 insertions(+), 18 deletions(-) - ---- a/drivers/tty/serial/ar933x_uart.c -+++ b/drivers/tty/serial/ar933x_uart.c -@@ -652,19 +652,18 @@ static int ar933x_uart_probe(struct plat - return -EINVAL; - } - -- up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL); -+ up = devm_kzalloc(&pdev->dev, sizeof(struct ar933x_uart_port), -+ GFP_KERNEL); - if (!up) - return -ENOMEM; - - port = &up->port; -- port->mapbase = mem_res->start; - -- port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE); -- if (!port->membase) { -- ret = -ENOMEM; -- goto err_free_up; -- } -+ port->membase = devm_ioremap_resource(&pdev->dev, mem_res); -+ if (IS_ERR(port->membase)) -+ return PTR_ERR(port->membase); - -+ port->mapbase = mem_res->start; - port->line = id; - port->irq = irq_res->start; - port->dev = &pdev->dev; -@@ -686,16 +685,10 @@ static int ar933x_uart_probe(struct plat - - ret = uart_add_one_port(&ar933x_uart_driver, &up->port); - if (ret) -- goto err_unmap; -+ return ret; - - platform_set_drvdata(pdev, up); - return 0; -- --err_unmap: -- iounmap(up->port.membase); --err_free_up: -- kfree(up); -- return ret; - } - - static int ar933x_uart_remove(struct platform_device *pdev) -@@ -705,11 +698,8 @@ static int ar933x_uart_remove(struct pla - up = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); - -- if (up) { -+ if (up) - uart_remove_one_port(&ar933x_uart_driver, &up->port); -- iounmap(up->port.membase); -- kfree(up); -- } - - return 0; - } diff --git a/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch deleted file mode 100644 index 4f825f8..0000000 --- a/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch +++ /dev/null @@ -1,310 +0,0 @@ -From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Wed, 11 Jan 2012 22:25:11 +0100 -Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/mips/ath79/mach-ap121.c | 6 ++ - arch/mips/ath79/mach-ap136.c | 6 ++ - arch/mips/ath79/mach-ap81.c | 6 ++ - arch/mips/ath79/mach-db120.c | 6 ++ - arch/mips/ath79/mach-pb44.c | 6 ++ - arch/mips/ath79/mach-ubnt-xm.c | 6 ++ - .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++- - drivers/spi/spi-ath79.c | 67 +++++++++++++------- - 8 files changed, 88 insertions(+), 23 deletions(-) - ---- a/arch/mips/ath79/mach-ap121.c -+++ b/arch/mips/ath79/mach-ap121.c -@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi - } - }; - -+static struct ath79_spi_controller_data ap121_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info ap121_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l1606e", -+ .controller_data = &ap121_spi0_data, - } - }; - ---- a/arch/mips/ath79/mach-ap136.c -+++ b/arch/mips/ath79/mach-ap136.c -@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi - }, - }; - -+static struct ath79_spi_controller_data ap136_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info ap136_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l6405d", -+ .controller_data = &ap136_spi0_data, - } - }; - ---- a/arch/mips/ath79/mach-ap81.c -+++ b/arch/mips/ath79/mach-ap81.c -@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio - } - }; - -+static struct ath79_spi_controller_data ap81_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info ap81_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", -+ .controller_data = &ap81_spi0_data, - } - }; - ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi - }, - }; - -+static struct ath79_spi_controller_data db120_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info db120_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "s25sl064a", -+ .controller_data = &db120_spi0_data, - } - }; - ---- a/arch/mips/ath79/mach-pb44.c -+++ b/arch/mips/ath79/mach-pb44.c -@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio - } - }; - -+static struct ath79_spi_controller_data pb44_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info pb44_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", -+ .controller_data = &pb44_spi0_data, - }, - }; - ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g - } - }; - -+static struct ath79_spi_controller_data ubnt_xm_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info ubnt_xm_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l6405d", -+ .controller_data = &ubnt_xm_spi0_data, - } - }; - ---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -@@ -16,8 +16,14 @@ struct ath79_spi_platform_data { - unsigned num_chipselect; - }; - -+enum ath79_spi_cs_type { -+ ATH79_SPI_CS_TYPE_INTERNAL, -+ ATH79_SPI_CS_TYPE_GPIO, -+}; -+ - struct ath79_spi_controller_data { -- unsigned gpio; -+ enum ath79_spi_cs_type cs_type; -+ unsigned cs_line; - }; - - #endif /* _ATH79_SPI_PLATFORM_H */ ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -35,6 +35,8 @@ - #define ATH79_SPI_RRW_DELAY_FACTOR 12000 - #define MHZ (1000 * 1000) - -+#define ATH79_SPI_CS_LINE_MAX 2 -+ - struct ath79_spi { - struct spi_bitbang bitbang; - u32 ioc_base; -@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct - { - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; -+ struct ath79_spi_controller_data *cdata = spi->controller_data; - - if (is_active) { - /* set initial clock polarity */ -@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); - } - -- if (spi->chip_select) { -- struct ath79_spi_controller_data *cdata = spi->controller_data; -- -- /* SPI is normally active-low */ -- gpio_set_value(cdata->gpio, cs_high); -- } else { -+ switch (cdata->cs_type) { -+ case ATH79_SPI_CS_TYPE_INTERNAL: - if (cs_high) -- sp->ioc_base |= AR71XX_SPI_IOC_CS0; -+ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line); - else -- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; -+ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line); - - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); -- } -+ break; - -+ case ATH79_SPI_CS_TYPE_GPIO: -+ /* SPI is normally active-low */ -+ if (gpio_cansleep(cdata->cs_line)) -+ gpio_set_value_cansleep(cdata->cs_line, cs_high); -+ else -+ gpio_set_value(cdata->cs_line, cs_high); -+ break; -+ } - } - - static void ath79_spi_enable(struct ath79_spi *sp) -@@ -120,24 +127,30 @@ static void ath79_spi_disable(struct ath - static int ath79_spi_setup_cs(struct spi_device *spi) - { - struct ath79_spi_controller_data *cdata; -+ unsigned long flags; - int status; - - cdata = spi->controller_data; -- if (spi->chip_select && !cdata) -+ if (!cdata) - return -EINVAL; - - status = 0; -- if (spi->chip_select) { -- unsigned long flags; -+ switch (cdata->cs_type) { -+ case ATH79_SPI_CS_TYPE_INTERNAL: -+ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX) -+ status = -EINVAL; -+ break; - -+ case ATH79_SPI_CS_TYPE_GPIO: - flags = GPIOF_DIR_OUT; - if (spi->mode & SPI_CS_HIGH) - flags |= GPIOF_INIT_LOW; - else - flags |= GPIOF_INIT_HIGH; - -- status = gpio_request_one(cdata->gpio, flags, -+ status = gpio_request_one(cdata->cs_line, flags, - dev_name(&spi->dev)); -+ break; - } - - return status; -@@ -145,9 +158,19 @@ static int ath79_spi_setup_cs(struct spi - - static void ath79_spi_cleanup_cs(struct spi_device *spi) - { -- if (spi->chip_select) { -- struct ath79_spi_controller_data *cdata = spi->controller_data; -- gpio_free(cdata->gpio); -+ struct ath79_spi_controller_data *cdata; -+ -+ cdata = spi->controller_data; -+ if (!cdata) -+ return; -+ -+ switch (cdata->cs_type) { -+ case ATH79_SPI_CS_TYPE_INTERNAL: -+ /* nothing to do */ -+ break; -+ case ATH79_SPI_CS_TYPE_GPIO: -+ gpio_free(cdata->cs_line); -+ break; - } - } - -@@ -155,6 +178,9 @@ static int ath79_spi_setup(struct spi_de - { - int status = 0; - -+ if (spi->controller_data == NULL) -+ return -EINVAL; -+ - if (spi->bits_per_word > 32) - return -EINVAL; - -@@ -215,6 +241,10 @@ static int ath79_spi_probe(struct platfo - unsigned long rate; - int ret; - -+ pdata = pdev->dev.platform_data; -+ if (!pdata) -+ return -EINVAL; -+ - master = spi_alloc_master(&pdev->dev, sizeof(*sp)); - if (master == NULL) { - dev_err(&pdev->dev, "failed to allocate spi master\n"); -@@ -224,14 +254,10 @@ static int ath79_spi_probe(struct platfo - sp = spi_master_get_devdata(master); - platform_set_drvdata(pdev, sp); - -- pdata = pdev->dev.platform_data; -- - master->setup = ath79_spi_setup; - master->cleanup = ath79_spi_cleanup; -- if (pdata) { -- master->bus_num = pdata->bus_num; -- master->num_chipselect = pdata->num_chipselect; -- } -+ master->bus_num = pdata->bus_num; -+ master->num_chipselect = pdata->num_chipselect; - - sp->bitbang.master = spi_master_get(master); - sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/target/linux/ar71xx/patches-3.10/213-MIPS-ath79-fix-ar933x-wmac-reset.patch b/target/linux/ar71xx/patches-3.10/213-MIPS-ath79-fix-ar933x-wmac-reset.patch deleted file mode 100644 index e0821a7..0000000 --- a/target/linux/ar71xx/patches-3.10/213-MIPS-ath79-fix-ar933x-wmac-reset.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -62,10 +62,27 @@ static void __init ar913x_wmac_setup(voi - - static int ar933x_wmac_reset(void) - { -+ int retries = 20; -+ - ath79_device_reset_set(AR933X_RESET_WMAC); - ath79_device_reset_clear(AR933X_RESET_WMAC); - -- return 0; -+ while (1) { -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); -+ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) -+ return 0; -+ -+ if (retries-- == 0) -+ break; -+ -+ udelay(10000); -+ retries++; -+ } -+ -+ pr_err("ar933x: WMAC reset timed out"); -+ return -ETIMEDOUT; - } - - static int ar933x_r1_get_wmac_revision(void) diff --git a/target/linux/ar71xx/patches-3.10/220-add_cpu_feature_overrides.patch b/target/linux/ar71xx/patches-3.10/220-add_cpu_feature_overrides.patch deleted file mode 100644 index d925f92..0000000 --- a/target/linux/ar71xx/patches-3.10/220-add_cpu_feature_overrides.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -@@ -36,6 +36,7 @@ - #define cpu_has_mdmx 0 - #define cpu_has_mips3d 0 - #define cpu_has_smartmips 0 -+#define cpu_has_rixi 0 - - #define cpu_has_mips32r1 1 - #define cpu_has_mips32r2 1 -@@ -43,6 +44,7 @@ - #define cpu_has_mips64r2 0 - - #define cpu_has_mipsmt 0 -+#define cpu_has_userlocal 0 - - #define cpu_has_64bits 0 - #define cpu_has_64bit_zero_reg 0 -@@ -51,5 +53,9 @@ - - #define cpu_dcache_line_size() 32 - #define cpu_icache_line_size() 32 -+#define cpu_has_vtag_icache 0 -+#define cpu_has_dc_aliases 1 -+#define cpu_has_ic_fills_f_dc 0 -+#define cpu_has_pindexed_dcache 0 - - #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ar71xx/patches-3.10/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch b/target/linux/ar71xx/patches-3.10/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch deleted file mode 100644 index 0bc64b7..0000000 --- a/target/linux/ar71xx/patches-3.10/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/include/asm/mips_machine.h -+++ b/arch/mips/include/asm/mips_machine.h -@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty - .mach_setup = _setup, \ - }; - -+#define MIPS_MACHINE_NONAME(_type, _id, _setup) \ -+static const char machine_id_##_type[] __initconst \ -+ __aligned(1) = _id; \ -+static struct mips_machine machine_##_type \ -+ __used __section(.mips.machines.init) = \ -+{ \ -+ .mach_type = _type, \ -+ .mach_id = machine_id_##_type, \ -+ .mach_name = NULL, \ -+ .mach_setup = _setup, \ -+}; -+ - extern long __mips_machines_start; - extern long __mips_machines_end; - diff --git a/target/linux/ar71xx/patches-3.10/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-3.10/310-lib-add-rle-decompression.patch deleted file mode 100644 index 46cdacd..0000000 --- a/target/linux/ar71xx/patches-3.10/310-lib-add-rle-decompression.patch +++ /dev/null @@ -1,124 +0,0 @@ ---- a/lib/Kconfig -+++ b/lib/Kconfig -@@ -197,6 +197,9 @@ config LZMA_COMPRESS - config LZMA_DECOMPRESS - tristate - -+config RLE_DECOMPRESS -+ tristate -+ - # - # These all provide a common interface (hence the apparent duplication with - # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) ---- a/lib/Makefile -+++ b/lib/Makefile -@@ -90,6 +90,7 @@ obj-$(CONFIG_XZ_DEC) += xz/ - obj-$(CONFIG_RAID6_PQ) += raid6/ - obj-$(CONFIG_LZMA_COMPRESS) += lzma/ - obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/ -+obj-$(CONFIG_RLE_DECOMPRESS) += rle.o - - lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o - lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o ---- /dev/null -+++ b/include/linux/rle.h -@@ -0,0 +1,18 @@ -+#ifndef _RLE_H_ -+#define _RLE_H_ -+ -+#ifdef CONFIG_RLE_DECOMPRESS -+int rle_decode(const unsigned char *src, size_t srclen, -+ unsigned char *dst, size_t dstlen, -+ size_t *src_done, size_t *dst_done); -+#else -+static inline int -+rle_decode(const unsigned char *src, size_t srclen, -+ unsigned char *dst, size_t dstlen, -+ size_t *src_done, size_t *dst_done) -+{ -+ return -ENOTSUPP; -+} -+#endif /* CONFIG_RLE_DECOMPRESS */ -+ -+#endif /* _RLE_H_ */ ---- /dev/null -+++ b/lib/rle.c -@@ -0,0 +1,78 @@ -+/* -+ * RLE decoding routine -+ * -+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/rle.h> -+ -+int rle_decode(const unsigned char *src, size_t srclen, -+ unsigned char *dst, size_t dstlen, -+ size_t *src_done, size_t *dst_done) -+{ -+ size_t srcpos, dstpos; -+ int ret; -+ -+ srcpos = 0; -+ dstpos = 0; -+ ret = -EINVAL; -+ -+ /* sanity checks */ -+ if (!src || !srclen || !dst || !dstlen) -+ goto out; -+ -+ while (1) { -+ char count; -+ -+ if (srcpos >= srclen) -+ break; -+ -+ count = (char) src[srcpos++]; -+ if (count == 0) { -+ ret = 0; -+ break; -+ } -+ -+ if (count > 0) { -+ unsigned char c; -+ -+ if (srcpos >= srclen) -+ break; -+ -+ c = src[srcpos++]; -+ -+ while (count--) { -+ if (dstpos >= dstlen) -+ break; -+ -+ dst[dstpos++] = c; -+ } -+ } else { -+ count *= -1; -+ -+ while (count--) { -+ if (srcpos >= srclen) -+ break; -+ if (dstpos >= dstlen) -+ break; -+ dst[dstpos++] = src[srcpos++]; -+ } -+ } -+ } -+ -+out: -+ if (src_done) -+ *src_done = srcpos; -+ if (dst_done) -+ *dst_done = dstpos; -+ -+ return ret; -+} -+ -+EXPORT_SYMBOL_GPL(rle_decode); diff --git a/target/linux/ar71xx/patches-3.10/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-3.10/401-mtd-physmap-add-lock-unlock.patch deleted file mode 100644 index b8b4e67..0000000 --- a/target/linux/ar71xx/patches-3.10/401-mtd-physmap-add-lock-unlock.patch +++ /dev/null @@ -1,94 +0,0 @@ ---- a/drivers/mtd/maps/physmap.c -+++ b/drivers/mtd/maps/physmap.c -@@ -31,6 +31,66 @@ struct physmap_flash_info { - int vpp_refcnt; - }; - -+static struct platform_device *physmap_map2pdev(struct map_info *map) -+{ -+ return (struct platform_device *) map->map_priv_1; -+} -+ -+static void physmap_lock(struct map_info *map) -+{ -+ struct platform_device *pdev; -+ struct physmap_flash_data *physmap_data; -+ -+ pdev = physmap_map2pdev(map); -+ physmap_data = pdev->dev.platform_data; -+ physmap_data->lock(pdev); -+} -+ -+static void physmap_unlock(struct map_info *map) -+{ -+ struct platform_device *pdev; -+ struct physmap_flash_data *physmap_data; -+ -+ pdev = physmap_map2pdev(map); -+ physmap_data = pdev->dev.platform_data; -+ physmap_data->unlock(pdev); -+} -+ -+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs) -+{ -+ map_word ret; -+ -+ physmap_lock(map); -+ ret = inline_map_read(map, ofs); -+ physmap_unlock(map); -+ -+ return ret; -+} -+ -+static void physmap_flash_write_lock(struct map_info *map, map_word d, -+ unsigned long ofs) -+{ -+ physmap_lock(map); -+ inline_map_write(map, d, ofs); -+ physmap_unlock(map); -+} -+ -+static void physmap_flash_copy_from_lock(struct map_info *map, void *to, -+ unsigned long from, ssize_t len) -+{ -+ physmap_lock(map); -+ inline_map_copy_from(map, to, from, len); -+ physmap_unlock(map); -+} -+ -+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to, -+ const void *from, ssize_t len) -+{ -+ physmap_lock(map); -+ inline_map_copy_to(map, to, from, len); -+ physmap_unlock(map); -+} -+ - static int physmap_flash_remove(struct platform_device *dev) - { - struct physmap_flash_info *info; -@@ -154,6 +214,13 @@ static int physmap_flash_probe(struct pl - - simple_map_init(&info->map[i]); - -+ if (physmap_data->lock && physmap_data->unlock) { -+ info->map[i].read = physmap_flash_read_lock; -+ info->map[i].write = physmap_flash_write_lock; -+ info->map[i].copy_from = physmap_flash_copy_from_lock; -+ info->map[i].copy_to = physmap_flash_copy_to_lock; -+ } -+ - probe_type = rom_probe_types; - if (physmap_data->probe_type == NULL) { - for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++) ---- a/include/linux/mtd/physmap.h -+++ b/include/linux/mtd/physmap.h -@@ -25,6 +25,8 @@ struct physmap_flash_data { - unsigned int width; - int (*init)(struct platform_device *); - void (*exit)(struct platform_device *); -+ void (*lock)(struct platform_device *); -+ void (*unlock)(struct platform_device *); - void (*set_vpp)(struct platform_device *, int); - unsigned int nr_parts; - unsigned int pfow_base; diff --git a/target/linux/ar71xx/patches-3.10/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-3.10/402-mtd-SST39VF6401B-support.patch deleted file mode 100644 index 246abd5..0000000 --- a/target/linux/ar71xx/patches-3.10/402-mtd-SST39VF6401B-support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -148,6 +148,7 @@ - #define SST39LF160 0x2782 - #define SST39VF1601 0x234b - #define SST39VF3201 0x235b -+#define SST39VF6401B 0x236d - #define SST39WF1601 0x274b - #define SST39WF1602 0x274a - #define SST39LF512 0x00D4 -@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec - ERASEINFO(0x10000,64), - } - }, { -+ .mfr_id = CFI_MFR_SST, -+ .dev_id = SST39VF6401B, -+ .name = "SST 39VF6401B", -+ .devtypes = CFI_DEVICETYPE_X16, -+ .uaddr = MTD_UADDR_0xAAAA_0x5555, -+ .dev_size = SIZE_8MiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x10000,128) -+ } -+ }, { - .mfr_id = CFI_MFR_ST, - .dev_id = M29F800AB, - .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-3.10/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-3.10/403-mtd_fix_cfi_cmdset_0002_status_check.patch deleted file mode 100644 index 88d3ab7..0000000 --- a/target/linux/ar71xx/patches-3.10/403-mtd_fix_cfi_cmdset_0002_status_check.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1306,8 +1306,8 @@ static int __xipram do_write_oneword(str - break; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, datum)) -+ goto enable_xip; - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); -@@ -1323,6 +1323,8 @@ static int __xipram do_write_oneword(str - - ret = -EIO; - } -+ -+ enable_xip: - xip_enable(map, chip, adr); - op_done: - chip->state = FL_READY; -@@ -1893,7 +1895,6 @@ static int cfi_amdstd_panic_write(struct - return 0; - } - -- - /* - * Handle devices with one erase region, that only implement - * the chip erase command. -@@ -1957,8 +1958,8 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, map_word_ff(map))) -+ goto op_done; - - if (time_after(jiffies, timeo)) { - printk(KERN_WARNING "MTD %s(): software timeout\n", -@@ -1978,6 +1979,7 @@ static int __xipram do_erase_chip(struct - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - xip_enable(map, chip, adr); - DISABLE_VPP(map); -@@ -2046,9 +2048,9 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); -- break; -+ goto op_done; - } - - if (time_after(jiffies, timeo)) { -@@ -2070,6 +2072,7 @@ static int __xipram do_erase_oneblock(st - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - DISABLE_VPP(map); - put_chip(map, chip, adr); diff --git a/target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch deleted file mode 100644 index 23d7818..0000000 --- a/target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -212,6 +212,12 @@ config MTD_BCM47XX_PARTS - This provides partitions parser for devices based on BCM47xx - boards. - -+config MTD_WRT160NL_PARTS -+ tristate "Linksys WRT160NL partitioning support" -+ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL -+ ---help--- -+ Linksys WRT160NL partitioning support -+ - config MTD_MYLOADER_PARTS - tristate "MyLoader partition parsing" - depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79 ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o -+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o diff --git a/target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch deleted file mode 100644 index 3851a6b..0000000 --- a/target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -214,7 +214,7 @@ config MTD_BCM47XX_PARTS - - config MTD_WRT160NL_PARTS - tristate "Linksys WRT160NL partitioning support" -- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL -+ depends on ATH79_MACH_WRT160NL - ---help--- - Linksys WRT160NL partitioning support - -@@ -234,6 +234,12 @@ config MTD_MYLOADER_PARTS - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. - -+config MTD_TPLINK_PARTS -+ tristate "TP-Link AR7XXX/AR9XXX partitioning support" -+ depends on ATH79 -+ ---help--- -+ TBD. -+ - comment "User Modules And Translation Layers" - - config MTD_BLKDEVS ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o -+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o - obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - - # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch deleted file mode 100644 index 8e1cd33..0000000 --- a/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch +++ /dev/null @@ -1,109 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -93,6 +93,7 @@ struct m25p { - u8 erase_opcode; - u8 *command; - bool fast_read; -+ size_t max_read_len; - }; - - static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) -@@ -344,6 +345,7 @@ static int m25p80_read(struct mtd_info * - struct spi_transfer t[2]; - struct spi_message m; - uint8_t opcode; -+ loff_t ofs; - - pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), - __func__, (u32)from, len); -@@ -359,19 +361,10 @@ static int m25p80_read(struct mtd_info * - t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0); - spi_message_add_tail(&t[0], &m); - -- t[1].rx_buf = buf; -- t[1].len = len; - spi_message_add_tail(&t[1], &m); - - mutex_lock(&flash->lock); - -- /* Wait till previous write/erase is done. */ -- if (wait_till_ready(flash)) { -- /* REVISIT status return?? */ -- mutex_unlock(&flash->lock); -- return 1; -- } -- - /* FIXME switch to OPCODE_FAST_READ. It's required for higher - * clocks; and at this writing, every chip this driver handles - * supports that opcode. -@@ -380,13 +373,43 @@ static int m25p80_read(struct mtd_info * - /* Set up the write data buffer. */ - opcode = flash->fast_read ? OPCODE_FAST_READ : OPCODE_NORM_READ; - flash->command[0] = opcode; -- m25p_addr2cmd(flash, from, flash->command); -+ ofs = 0; -+ while (len) { -+ size_t readlen; -+ size_t done; -+ int ret; -+ -+ ret = wait_till_ready(flash); -+ if (ret) { -+ mutex_unlock(&flash->lock); -+ return 1; -+ } -+ -+ if (flash->max_read_len > 0 && -+ flash->max_read_len < len) -+ readlen = flash->max_read_len; -+ else -+ readlen = len; -+ -+ t[1].rx_buf = buf + ofs; -+ t[1].len = readlen; -+ -+ m25p_addr2cmd(flash, from + ofs, flash->command); -+ -+ spi_sync(flash->spi, &m); - -- spi_sync(flash->spi, &m); -+ done = m.actual_length - m25p_cmdsz(flash) - -+ (flash->fast_read ? 1 : 0); -+ if (done != readlen) { -+ mutex_unlock(&flash->lock); -+ return 1; -+ } - -- *retlen = m.actual_length - m25p_cmdsz(flash) - -- (flash->fast_read ? 1 : 0); -+ ofs += done; -+ len -= done; -+ } - -+ *retlen = ofs; - mutex_unlock(&flash->lock); - - return 0; -@@ -1022,6 +1045,12 @@ static int m25p_probe(struct spi_device - flash->mtd._unlock = m25p80_unlock; - } - -+ if (data && data->max_read_len) { -+ flash->max_read_len = data->max_read_len; -+ dev_warn(&spi->dev, "max_read_len set to %d bytes\n", -+ flash->max_read_len); -+ } -+ - /* sst flash chips use AAI word program */ - if (info->flags & SST_WRITE) - flash->mtd._write = sst_write; ---- a/include/linux/spi/flash.h -+++ b/include/linux/spi/flash.h -@@ -25,6 +25,7 @@ struct flash_platform_data { - - char *type; - -+ size_t max_read_len; - /* we'll likely add more ... use JEDEC IDs, etc */ - }; - diff --git a/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch deleted file mode 100644 index 26b6f70..0000000 --- a/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -1122,7 +1122,9 @@ static int m25p_probe(struct spi_device - /* partitions should match sector boundaries; and it may be good to - * use readonly partitions for writeprotected sectors (BP2..BP0). - */ -- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, -+ return mtd_device_parse_register(&flash->mtd, -+ data ? data->part_probes : NULL, -+ &ppdata, - data ? data->parts : NULL, - data ? data->nr_parts : 0); - } ---- a/include/linux/spi/flash.h -+++ b/include/linux/spi/flash.h -@@ -24,6 +24,7 @@ struct flash_platform_data { - unsigned int nr_parts; - - char *type; -+ const char **part_probes; - - size_t max_read_len; - /* we'll likely add more ... use JEDEC IDs, etc */ diff --git a/target/linux/ar71xx/patches-3.10/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-3.10/408-mtd-redboot_partition_scan.patch deleted file mode 100644 index cd41e7c..0000000 --- a/target/linux/ar71xx/patches-3.10/408-mtd-redboot_partition_scan.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; - while (mtd_block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; -@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; - - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); -@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ar71xx/patches-3.10/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-3.10/409-mtd-rb4xx_nand_driver.patch deleted file mode 100644 index e8ea200..0000000 --- a/target/linux/ar71xx/patches-3.10/409-mtd-rb4xx_nand_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -544,4 +544,8 @@ config MTD_NAND_XWAY - Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached - to the External Bus Unit (EBU). - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && ATH79_MACH_RB4XX -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-3.10/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-3.10/410-mtd-rb750-nand-driver.patch deleted file mode 100644 index bf84807..0000000 --- a/target/linux/ar71xx/patches-3.10/410-mtd-rb750-nand-driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -548,4 +548,8 @@ config MTD_NAND_RB4XX - tristate "NAND flash driver for RouterBoard 4xx series" - depends on MTD_NAND && ATH79_MACH_RB4XX - -+config MTD_NAND_RB750 -+ tristate "NAND flash driver for the RouterBoard 750" -+ depends on MTD_NAND && ATH79_MACH_RB750 -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o - obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o -+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-3.10/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-3.10/411-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index 58485d0..0000000 --- a/target/linux/ar71xx/patches-3.10/411-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -41,7 +41,7 @@ - #include <linux/mtd/xip.h> - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_WORD_RETRIES 3 - -@@ -52,7 +52,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd) - { - struct map_info *map = mtd->priv; -@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(stru - mtd->_write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd) -@@ -1463,6 +1467,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1587,7 +1592,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -1662,6 +1666,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - /* - * Wait for the flash chip to become ready to write data diff --git a/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch b/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch deleted file mode 100644 index 00a1ea3..0000000 --- a/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -1072,6 +1072,7 @@ static int m25p_probe(struct spi_device - if (info->flags & M25P_NO_ERASE) - flash->mtd.flags |= MTD_NO_ERASE; - -+ memset(&ppdata, '\0', sizeof(ppdata)); - ppdata.of_node = spi->dev.of_node; - flash->mtd.dev.parent = &spi->dev; - flash->page_size = info->page_size; diff --git a/target/linux/ar71xx/patches-3.10/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-3.10/413-mtd-ar934x-nand-driver.patch deleted file mode 100644 index 1759536..0000000 --- a/target/linux/ar71xx/patches-3.10/413-mtd-ar934x-nand-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -552,4 +552,12 @@ config MTD_NAND_RB750 - tristate "NAND flash driver for the RouterBoard 750" - depends on MTD_NAND && ATH79_MACH_RB750 - -+config MTD_NAND_AR934X -+ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" -+ depends on (SOC_AR934X || SOC_QCA955X) -+ -+config MTD_NAND_AR934X_HW_ECC -+ bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)" -+ depends on MTD_NAND_AR934X -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams- - obj-$(CONFIG_MTD_NAND_DENALI) += denali.o - obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o - obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o -+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o - obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o - obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o - obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o diff --git a/target/linux/ar71xx/patches-3.10/414-mtd-rb91x-nand-driver.patch b/target/linux/ar71xx/patches-3.10/414-mtd-rb91x-nand-driver.patch deleted file mode 100644 index 85e6b0a..0000000 --- a/target/linux/ar71xx/patches-3.10/414-mtd-rb91x-nand-driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -552,6 +552,10 @@ config MTD_NAND_RB750 - tristate "NAND flash driver for the RouterBoard 750" - depends on MTD_NAND && ATH79_MACH_RB750 - -+config MTD_NAND_RB91X -+ tristate "NAND flash driver for the RouterBOARD 91x series" -+ depends on MTD_NAND && ATH79_MACH_RB91X -+ - config MTD_NAND_AR934X - tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" - depends on (SOC_AR934X || SOC_QCA955X) ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nan - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o - obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o -+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-3.10/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-3.10/420-net-ar71xx_mac_driver.patch deleted file mode 100644 index b6f8109..0000000 --- a/target/linux/ar71xx/patches-3.10/420-net-ar71xx_mac_driver.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/net/ethernet/atheros/Kconfig -+++ b/drivers/net/ethernet/atheros/Kconfig -@@ -5,7 +5,7 @@ - config NET_VENDOR_ATHEROS - bool "Atheros devices" - default y -- depends on PCI -+ depends on (PCI || ATH79) - ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from -@@ -85,4 +85,6 @@ config ALX - To compile this driver as a module, choose M here. The module - will be called alx. - -+source drivers/net/ethernet/atheros/ag71xx/Kconfig -+ - endif # NET_VENDOR_ATHEROS ---- a/drivers/net/ethernet/atheros/Makefile -+++ b/drivers/net/ethernet/atheros/Makefile -@@ -2,6 +2,7 @@ - # Makefile for the Atheros network device drivers. - # - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_ATL1) += atlx/ - obj-$(CONFIG_ATL2) += atlx/ - obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/target/linux/ar71xx/patches-3.10/422-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-3.10/422-dsa-trailer-tag-validation-fix.patch deleted file mode 100644 index 3e3902b..0000000 --- a/target/linux/ar71xx/patches-3.10/422-dsa-trailer-tag-validation-fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/dsa/tag_trailer.c -+++ b/net/dsa/tag_trailer.c -@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s - - trailer = skb_tail_pointer(skb) - 4; - if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || -- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) -+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) - goto out_drop; - - source_port = trailer[1] & 7; diff --git a/target/linux/ar71xx/patches-3.10/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-3.10/423-dsa-add-88e6063-driver.patch deleted file mode 100644 index 1348cd9..0000000 --- a/target/linux/ar71xx/patches-3.10/423-dsa-add-88e6063-driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/dsa/Kconfig -+++ b/drivers/net/dsa/Kconfig -@@ -13,6 +13,13 @@ config NET_DSA_MV88E6060 - This enables support for the Marvell 88E6060 ethernet switch - chip. - -+config NET_DSA_MV88E6063 -+ bool "Marvell 88E6063 ethernet switch chip support" -+ select NET_DSA_TAG_TRAILER -+ ---help--- -+ This enables support for the Marvell 88E6063 ethernet switch -+ chip -+ - config NET_DSA_MV88E6XXX_NEED_PPU - bool - default n ---- a/drivers/net/dsa/Makefile -+++ b/drivers/net/dsa/Makefile -@@ -1,4 +1,5 @@ - obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o -+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o - obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o - mv88e6xxx_drv-y += mv88e6xxx.o - ifdef CONFIG_NET_DSA_MV88E6123_61_65 diff --git a/target/linux/ar71xx/patches-3.10/424-net-phy-add-phy_mmd_read_write-functions.patch b/target/linux/ar71xx/patches-3.10/424-net-phy-add-phy_mmd_read_write-functions.patch deleted file mode 100644 index 6b69679..0000000 --- a/target/linux/ar71xx/patches-3.10/424-net-phy-add-phy_mmd_read_write-functions.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -1009,6 +1009,12 @@ static int phy_read_mmd_indirect(struct - return ret; - } - -+int phy_read_mmd(struct phy_device *phydev, int prtad, int devad, int addr) -+{ -+ return phy_read_mmd_indirect(phydev->bus, prtad, devad, phydev->addr); -+} -+EXPORT_SYMBOL(phy_read_mmd); -+ - /** - * phy_write_mmd_indirect - writes data to the MMD registers - * @bus: the target MII bus -@@ -1034,6 +1040,12 @@ static void phy_write_mmd_indirect(struc - bus->write(bus, addr, MII_MMD_DATA, data); - } - -+void phy_write_mmd(struct phy_device *phydev, int prtad, int devad, u16 data) -+{ -+ phy_write_mmd_indirect(phydev->bus, prtad, devad, phydev->addr, data); -+} -+EXPORT_SYMBOL(phy_write_mmd); -+ - /** - * phy_init_eee - init and check the EEE feature - * @phydev: target phy_device struct ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -580,6 +580,9 @@ int phy_register_fixup_for_uid(u32 phy_u - int (*run)(struct phy_device *)); - int phy_scan_fixups(struct phy_device *phydev); - -+int phy_read_mmd(struct phy_device *phydev, int prtad, int devad, int addr); -+void phy_write_mmd(struct phy_device *phydev, int prtad, int devad, u16 data); -+ - int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); - int phy_get_eee_err(struct phy_device *phydev); - int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); diff --git a/target/linux/ar71xx/patches-3.10/425-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/ar71xx/patches-3.10/425-net-phy-at803x-allow-to-configure-via-pdata.patch deleted file mode 100644 index 788653f..0000000 --- a/target/linux/ar71xx/patches-3.10/425-net-phy-at803x-allow-to-configure-via-pdata.patch +++ /dev/null @@ -1,134 +0,0 @@ ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -12,10 +12,12 @@ - */ - - #include <linux/phy.h> -+#include <linux/mdio.h> - #include <linux/module.h> - #include <linux/string.h> - #include <linux/netdevice.h> - #include <linux/etherdevice.h> -+#include <linux/platform_data/phy-at803x.h> - - #define AT803X_INTR_ENABLE 0x12 - #define AT803X_INTR_STATUS 0x13 -@@ -28,10 +30,61 @@ - #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E - #define AT803X_FUNC_DATA 0x4003 - -+#define AT803X_PCS_SMART_EEE_CTRL3 0x805D -+ -+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3 -+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12 -+#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8) -+ -+#define AT803X_DEBUG_PORT_ACCESS_OFFSET 0x1D -+#define AT803X_DEBUG_PORT_ACCESS_DATA 0x1E -+ -+#define AT803X_DBG0_REG 0x00 -+#define AT803X_DBG0_RGMII_RX_CLK_DELAY_EN BIT(8) -+ -+#define AT803X_DBG5_REG 0x05 -+#define AT803X_DBG5_RGMII_TX_CLK_DELAY_EN BIT(8) -+ - MODULE_DESCRIPTION("Atheros 803x PHY driver"); - MODULE_AUTHOR("Matus Ujhelyi"); - MODULE_LICENSE("GPL"); - -+static u16 -+at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set) -+{ -+ struct mii_bus *bus = phydev->bus; -+ int val; -+ -+ mutex_lock(&bus->mdio_lock); -+ -+ bus->write(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_OFFSET, reg); -+ val = bus->read(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_DATA); -+ if (val < 0) { -+ val = 0xffff; -+ goto out; -+ } -+ -+ val &= ~clear; -+ val |= set; -+ bus->write(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_DATA, val); -+ -+out: -+ mutex_unlock(&bus->mdio_lock); -+ return val; -+} -+ -+static inline void -+at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set) -+{ -+ at803x_dbg_reg_rmw(phydev, reg, 0, set); -+} -+ -+static inline void -+at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear) -+{ -+ at803x_dbg_reg_rmw(phydev, reg, clear, 0); -+} -+ - static void at803x_set_wol_mac_addr(struct phy_device *phydev) - { - struct net_device *ndev = phydev->attached_dev; -@@ -62,8 +115,16 @@ static void at803x_set_wol_mac_addr(stru - } - } - -+static void at803x_disable_smarteee(struct phy_device *phydev) -+{ -+ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3, -+ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT); -+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0); -+} -+ - static int at803x_config_init(struct phy_device *phydev) - { -+ struct at803x_platform_data *pdata; - int val; - u32 features; - int status; -@@ -105,6 +166,26 @@ static int at803x_config_init(struct phy - status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE); - status = phy_read(phydev, AT803X_INTR_STATUS); - -+ pdata = dev_get_platdata(&phydev->dev); -+ if (pdata) { -+ if (pdata->disable_smarteee) -+ at803x_disable_smarteee(phydev); -+ -+ if (pdata->enable_rgmii_rx_delay) -+ at803x_dbg_reg_set(phydev, AT803X_DBG0_REG, -+ AT803X_DBG0_RGMII_RX_CLK_DELAY_EN); -+ else -+ at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG, -+ AT803X_DBG0_RGMII_RX_CLK_DELAY_EN); -+ -+ if (pdata->enable_rgmii_tx_delay) -+ at803x_dbg_reg_set(phydev, AT803X_DBG5_REG, -+ AT803X_DBG5_RGMII_TX_CLK_DELAY_EN); -+ else -+ at803x_dbg_reg_clr(phydev, AT803X_DBG5_REG, -+ AT803X_DBG5_RGMII_TX_CLK_DELAY_EN); -+ } -+ - return 0; - } - ---- /dev/null -+++ b/include/linux/platform_data/phy-at803x.h -@@ -0,0 +1,10 @@ -+#ifndef _PHY_AT803X_PDATA_H -+#define _PHY_AT803X_PDATA_H -+ -+struct at803x_platform_data { -+ int disable_smarteee:1; -+ int enable_rgmii_tx_delay:1; -+ int enable_rgmii_rx_delay:1; -+}; -+ -+#endif /* _PHY_AT803X_PDATA_H */ diff --git a/target/linux/ar71xx/patches-3.10/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-3.10/430-drivers-link-spi-before-mtd.patch deleted file mode 100644 index 39aceac..0000000 --- a/target/linux/ar71xx/patches-3.10/430-drivers-link-spi-before-mtd.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -62,8 +62,8 @@ obj-$(CONFIG_IDE) += ide/ - obj-$(CONFIG_SCSI) += scsi/ - obj-$(CONFIG_ATA) += ata/ - obj-$(CONFIG_TARGET_CORE) += target/ --obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPI) += spi/ -+obj-$(CONFIG_MTD) += mtd/ - obj-y += hsi/ - obj-y += net/ - obj-$(CONFIG_ATM) += atm/ diff --git a/target/linux/ar71xx/patches-3.10/431-spi-add-various-flags.patch b/target/linux/ar71xx/patches-3.10/431-spi-add-various-flags.patch deleted file mode 100644 index dca3366..0000000 --- a/target/linux/ar71xx/patches-3.10/431-spi-add-various-flags.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -519,6 +519,8 @@ struct spi_transfer { - dma_addr_t rx_dma; - - unsigned cs_change:1; -+ unsigned verify:1; -+ unsigned fast_write:1; - u8 bits_per_word; - u16 delay_usecs; - u32 speed_hz; -@@ -560,6 +562,7 @@ struct spi_message { - struct spi_device *spi; - - unsigned is_dma_mapped:1; -+ unsigned fast_read:1; - - /* REVISIT: we might want a flag affecting the behavior of the - * last transfer ... allowing things like "read 16 bit length L" diff --git a/target/linux/ar71xx/patches-3.10/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-3.10/432-spi-rb4xx-spi-driver.patch deleted file mode 100644 index 9be59fc..0000000 --- a/target/linux/ar71xx/patches-3.10/432-spi-rb4xx-spi-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -354,6 +354,12 @@ config SPI_RSPI - help - SPI driver for Renesas RSPI blocks. - -+config SPI_RB4XX -+ tristate "Mikrotik RB4XX SPI master" -+ depends on SPI_MASTER && ATH79_MACH_RB4XX -+ help -+ SPI controller driver for the Mikrotik RB4xx series boards. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C24XX ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -55,6 +55,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_ - spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o - obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o -+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o - obj-$(CONFIG_SPI_RSPI) += spi-rspi.o - obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o - spi-s3c24xx-hw-y := spi-s3c24xx.o diff --git a/target/linux/ar71xx/patches-3.10/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.10/433-spi-rb4xx-cpld-driver.patch deleted file mode 100644 index ceff740..0000000 --- a/target/linux/ar71xx/patches-3.10/433-spi-rb4xx-cpld-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -546,6 +546,13 @@ config SPI_TLE62X0 - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. - -+config SPI_RB4XX_CPLD -+ tristate "MikroTik RB4XX CPLD driver" -+ depends on ATH79_MACH_RB4XX -+ help -+ SPI driver for the Xilinx CPLD chip present on the -+ MikroTik RB4xx boards. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -56,6 +56,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_ - obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o - obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o -+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o - obj-$(CONFIG_SPI_RSPI) += spi-rspi.o - obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o - spi-s3c24xx-hw-y := spi-s3c24xx.o diff --git a/target/linux/ar71xx/patches-3.10/434-spi-ap83_spi_controller.patch b/target/linux/ar71xx/patches-3.10/434-spi-ap83_spi_controller.patch deleted file mode 100644 index 37b52e0..0000000 --- a/target/linux/ar71xx/patches-3.10/434-spi-ap83_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o - # SPI master controller drivers (bus) - obj-$(CONFIG_SPI_ALTERA) += spi-altera.o - obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o -+obj-$(CONFIG_SPI_AP83) += spi-ap83.o - obj-$(CONFIG_SPI_ATH79) += spi-ath79.o - obj-$(CONFIG_SPI_AU1550) += spi-au1550.o - obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -60,6 +60,14 @@ config SPI_ALTERA - help - This is the driver for the Altera SPI Controller. - -+config SPI_AP83 -+ tristate "Atheros AP83 specific SPI Controller" -+ depends on SPI_MASTER && ATH79_MACH_AP83 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros AP83 -+ reference board. -+ - config SPI_ATH79 - tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" - depends on ATH79 && GPIOLIB diff --git a/target/linux/ar71xx/patches-3.10/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-3.10/435-spi-vsc7385_driver.patch deleted file mode 100644 index 61385a1..0000000 --- a/target/linux/ar71xx/patches-3.10/435-spi-vsc7385_driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -561,6 +561,11 @@ config SPI_RB4XX_CPLD - SPI driver for the Xilinx CPLD chip present on the - MikroTik RB4xx boards. - -+config SPI_VSC7385 -+ tristate "Vitesse VSC7385 ethernet switch driver" -+ help -+ SPI driver for the Vitesse VSC7385 ethernet switch. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -76,5 +76,6 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp. - obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o - obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o - obj-$(CONFIG_SPI_TXX9) += spi-txx9.o -+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o - obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o - obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o diff --git a/target/linux/ar71xx/patches-3.10/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-3.10/440-leds-wndr3700-usb-led-driver.patch deleted file mode 100644 index 3b4e4a5..0000000 --- a/target/linux/ar71xx/patches-3.10/440-leds-wndr3700-usb-led-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -479,6 +479,13 @@ config LEDS_BLINKM - This option enables support for the BlinkM RGB LED connected - through I2C. Say Y to enable support for the BlinkM LED. - -+config LEDS_WNDR3700_USB -+ tristate "NETGEAR WNDR3700 USB LED driver" -+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700 -+ help -+ This option enables support for the USB LED found on the -+ NETGEAR WNDR3700 board. -+ - comment "LED Triggers" - source "drivers/leds/trigger/Kconfig" - ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905 - obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o - obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o - obj-$(CONFIG_LEDS_PWM) += leds-pwm.o -+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o - obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o - obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o - obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/target/linux/ar71xx/patches-3.10/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-3.10/441-leds-rb750-led-driver.patch deleted file mode 100644 index 8c3652b..0000000 --- a/target/linux/ar71xx/patches-3.10/441-leds-rb750-led-driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -486,6 +486,10 @@ config LEDS_WNDR3700_USB - This option enables support for the USB LED found on the - NETGEAR WNDR3700 board. - -+config LEDS_RB750 -+ tristate "LED driver for the Mikrotik RouterBOARD 750" -+ depends on LEDS_CLASS && ATH79_MACH_RB750 -+ - comment "LED Triggers" - source "drivers/leds/trigger/Kconfig" - ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -47,6 +47,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 - obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o - obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o - obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o -+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o - obj-$(CONFIG_LEDS_NS2) += leds-ns2.o - obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o - obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o diff --git a/target/linux/ar71xx/patches-3.10/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-3.10/450-gpio-nxp-74hc153-gpio-chip-driver.patch deleted file mode 100644 index eb13b87..0000000 --- a/target/linux/ar71xx/patches-3.10/450-gpio-nxp-74hc153-gpio-chip-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -717,4 +717,12 @@ config GPIO_VIPERBOARD - River Tech's viperboard.h for detailed meaning - of the module parameters. - -+comment "Other GPIO expanders" -+ -+config GPIO_NXP_74HC153 -+ tristate "NXP 74HC153 Dual 4-input multiplexer" -+ help -+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This -+ provides a GPIO interface supporting input mode only. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2 - obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o - obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o - obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o -+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o - obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o - obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o - obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o diff --git a/target/linux/ar71xx/patches-3.10/451-gpio-74x164-improve-platform-device-support.patch b/target/linux/ar71xx/patches-3.10/451-gpio-74x164-improve-platform-device-support.patch deleted file mode 100644 index b19bb85..0000000 --- a/target/linux/ar71xx/patches-3.10/451-gpio-74x164-improve-platform-device-support.patch +++ /dev/null @@ -1,74 +0,0 @@ ---- a/drivers/gpio/gpio-74x164.c -+++ b/drivers/gpio/gpio-74x164.c -@@ -109,10 +109,14 @@ static int gen_74x164_probe(struct spi_d - { - struct gen_74x164_chip *chip; - struct gen_74x164_chip_platform_data *pdata; -+ struct device_node *np; - int ret; - -- if (!spi->dev.of_node) { -- dev_err(&spi->dev, "No device tree data available.\n"); -+ pdata = spi->dev.platform_data; -+ np = spi->dev.of_node; -+ -+ if (!np && !pdata) { -+ dev_err(&spi->dev, "No configuration data available.\n"); - return -EINVAL; - } - -@@ -129,7 +133,6 @@ static int gen_74x164_probe(struct spi_d - if (!chip) - return -ENOMEM; - -- pdata = spi->dev.platform_data; - if (pdata && pdata->base) - chip->gpio_chip.base = pdata->base; - else -@@ -146,12 +149,19 @@ static int gen_74x164_probe(struct spi_d - chip->gpio_chip.get = gen_74x164_get_value; - chip->gpio_chip.set = gen_74x164_set_value; - -- if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) { -- dev_err(&spi->dev, "Missing registers-number property in the DT.\n"); -- ret = -EINVAL; -- goto exit_destroy; -+ if (np) { -+ if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) { -+ dev_err(&spi->dev, "Missing registers-number property in the DT.\n"); -+ ret = -EINVAL; -+ goto exit_destroy; -+ } -+ } else if (pdata) { -+ chip->registers = pdata->num_registers; - } - -+ if (!chip->registers) -+ chip->registers = 1; -+ - chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; - chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL); - if (!chip->buffer) { -@@ -159,6 +169,9 @@ static int gen_74x164_probe(struct spi_d - goto exit_destroy; - } - -+ if (pdata && pdata->init_data) -+ memcpy(chip->buffer, pdata->init_data, chip->registers); -+ - chip->gpio_chip.can_sleep = 1; - chip->gpio_chip.dev = &spi->dev; - chip->gpio_chip.owner = THIS_MODULE; ---- a/include/linux/spi/74x164.h -+++ b/include/linux/spi/74x164.h -@@ -4,6 +4,10 @@ - struct gen_74x164_chip_platform_data { - /* number assigned to the first GPIO */ - unsigned base; -+ /* number of chained registers */ -+ unsigned num_registers; -+ /* address of a buffer containing initial data */ -+ u8 *init_data; - }; - - #endif diff --git a/target/linux/ar71xx/patches-3.10/452-gpio-add-gpio-latch-driver.patch b/target/linux/ar71xx/patches-3.10/452-gpio-add-gpio-latch-driver.patch deleted file mode 100644 index 79ef548..0000000 --- a/target/linux/ar71xx/patches-3.10/452-gpio-add-gpio-latch-driver.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -725,4 +725,9 @@ config GPIO_NXP_74HC153 - Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This - provides a GPIO interface supporting input mode only. - -+config GPIO_LATCH -+ tristate "GPIO latch driver" -+ help -+ Say yes here to enable a GPIO latch driver. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_GPIO_IT8761E) += gpio-it876 - obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o - obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o - obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o -+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o - obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o - obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o - obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o diff --git a/target/linux/ar71xx/patches-3.10/460-spi-bitbang-export-spi_bitbang_bufs.patch b/target/linux/ar71xx/patches-3.10/460-spi-bitbang-export-spi_bitbang_bufs.patch deleted file mode 100644 index 919b85c..0000000 --- a/target/linux/ar71xx/patches-3.10/460-spi-bitbang-export-spi_bitbang_bufs.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/spi/spi-bitbang.c -+++ b/drivers/spi/spi-bitbang.c -@@ -234,13 +234,14 @@ void spi_bitbang_cleanup(struct spi_devi - } - EXPORT_SYMBOL_GPL(spi_bitbang_cleanup); - --static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) -+int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) - { - struct spi_bitbang_cs *cs = spi->controller_state; - unsigned nsecs = cs->nsecs; - - return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t); - } -+EXPORT_SYMBOL_GPL(spi_bitbang_bufs); - - /*----------------------------------------------------------------------*/ - ---- a/include/linux/spi/spi_bitbang.h -+++ b/include/linux/spi/spi_bitbang.h -@@ -44,6 +44,7 @@ extern void spi_bitbang_cleanup(struct s - extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m); - extern int spi_bitbang_setup_transfer(struct spi_device *spi, - struct spi_transfer *t); -+extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t); - - /* start or stop queue processing */ - extern int spi_bitbang_start(struct spi_bitbang *spi); diff --git a/target/linux/ar71xx/patches-3.10/461-spi-add-type-field-to-spi_transfer.patch b/target/linux/ar71xx/patches-3.10/461-spi-add-type-field-to-spi_transfer.patch deleted file mode 100644 index c99ff1b..0000000 --- a/target/linux/ar71xx/patches-3.10/461-spi-add-type-field-to-spi_transfer.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -422,6 +422,12 @@ extern struct spi_master *spi_busnum_to_ - - /*---------------------------------------------------------------------------*/ - -+enum spi_transfer_type { -+ SPI_TRANSFER_GENERIC = 0, -+ SPI_TRANSFER_FLASH_READ_CMD, -+ SPI_TRANSFER_FLASH_READ_DATA, -+}; -+ - /* - * I/O INTERFACE between SPI controller and protocol drivers - * -@@ -524,6 +530,7 @@ struct spi_transfer { - u8 bits_per_word; - u16 delay_usecs; - u32 speed_hz; -+ enum spi_transfer_type type; - - struct list_head transfer_list; - }; diff --git a/target/linux/ar71xx/patches-3.10/462-mtd-m25p80-set-spi-transfer-type.patch b/target/linux/ar71xx/patches-3.10/462-mtd-m25p80-set-spi-transfer-type.patch deleted file mode 100644 index e1ceb66..0000000 --- a/target/linux/ar71xx/patches-3.10/462-mtd-m25p80-set-spi-transfer-type.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -357,10 +357,12 @@ static int m25p80_read(struct mtd_info * - * OPCODE_FAST_READ (if available) is faster. - * Should add 1 byte DUMMY_BYTE. - */ -+ t[0].type = SPI_TRANSFER_FLASH_READ_CMD; - t[0].tx_buf = flash->command; - t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0); - spi_message_add_tail(&t[0], &m); - -+ t[1].type = SPI_TRANSFER_FLASH_READ_DATA; - spi_message_add_tail(&t[1], &m); - - mutex_lock(&flash->lock); diff --git a/target/linux/ar71xx/patches-3.10/463-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-3.10/463-spi-ath79-add-fast-flash-read.patch deleted file mode 100644 index e861644..0000000 --- a/target/linux/ar71xx/patches-3.10/463-spi-ath79-add-fast-flash-read.patch +++ /dev/null @@ -1,185 +0,0 @@ ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -37,6 +37,11 @@ - - #define ATH79_SPI_CS_LINE_MAX 2 - -+enum ath79_spi_state { -+ ATH79_SPI_STATE_WAIT_CMD = 0, -+ ATH79_SPI_STATE_WAIT_READ, -+}; -+ - struct ath79_spi { - struct spi_bitbang bitbang; - u32 ioc_base; -@@ -44,6 +49,11 @@ struct ath79_spi { - void __iomem *base; - struct clk *clk; - unsigned rrw_delay; -+ -+ enum ath79_spi_state state; -+ u32 clk_div; -+ unsigned long read_addr; -+ unsigned long ahb_rate; - }; - - static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) -@@ -111,9 +121,6 @@ static void ath79_spi_enable(struct ath7 - /* save CTRL register */ - sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); - sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); -- -- /* TODO: setup speed? */ -- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); - } - - static void ath79_spi_disable(struct ath79_spi *sp) -@@ -232,6 +239,110 @@ static u32 ath79_spi_txrx_mode0(struct s - return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); - } - -+static int ath79_spi_do_read_flash_data(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ -+ /* disable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); -+ -+ memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len); -+ -+ /* enable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); -+ -+ /* restore IOC register */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); -+ -+ return t->len; -+} -+ -+static int ath79_spi_do_read_flash_cmd(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ int len; -+ const u8 *p; -+ -+ sp->read_addr = 0; -+ -+ len = t->len - 1; -+ p = t->tx_buf; -+ -+ while (len--) { -+ p++; -+ sp->read_addr <<= 8; -+ sp->read_addr |= *p; -+ } -+ -+ return t->len; -+} -+ -+static bool ath79_spi_is_read_cmd(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ return t->type == SPI_TRANSFER_FLASH_READ_CMD; -+} -+ -+static bool ath79_spi_is_data_read(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ return t->type == SPI_TRANSFER_FLASH_READ_DATA; -+} -+ -+static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ int ret; -+ -+ switch (sp->state) { -+ case ATH79_SPI_STATE_WAIT_CMD: -+ if (ath79_spi_is_read_cmd(spi, t)) { -+ ret = ath79_spi_do_read_flash_cmd(spi, t); -+ sp->state = ATH79_SPI_STATE_WAIT_READ; -+ } else { -+ ret = spi_bitbang_bufs(spi, t); -+ } -+ break; -+ -+ case ATH79_SPI_STATE_WAIT_READ: -+ if (ath79_spi_is_data_read(spi, t)) { -+ ret = ath79_spi_do_read_flash_data(spi, t); -+ } else { -+ dev_warn(&spi->dev, "flash data read expected\n"); -+ ret = -EIO; -+ } -+ sp->state = ATH79_SPI_STATE_WAIT_CMD; -+ break; -+ -+ default: -+ BUG(); -+ } -+ -+ return ret; -+} -+ -+static int ath79_spi_setup_transfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ struct ath79_spi_controller_data *cdata; -+ int ret; -+ -+ ret = spi_bitbang_setup_transfer(spi, t); -+ if (ret) -+ return ret; -+ -+ cdata = spi->controller_data; -+ if (cdata->is_flash) -+ sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs; -+ else -+ sp->bitbang.txrx_bufs = spi_bitbang_bufs; -+ -+ return ret; -+} -+ - static int ath79_spi_probe(struct platform_device *pdev) - { - struct spi_master *master; -@@ -254,6 +365,8 @@ static int ath79_spi_probe(struct platfo - sp = spi_master_get_devdata(master); - platform_set_drvdata(pdev, sp); - -+ sp->state = ATH79_SPI_STATE_WAIT_CMD; -+ - master->setup = ath79_spi_setup; - master->cleanup = ath79_spi_cleanup; - master->bus_num = pdata->bus_num; -@@ -262,7 +375,7 @@ static int ath79_spi_probe(struct platfo - sp->bitbang.master = spi_master_get(master); - sp->bitbang.chipselect = ath79_spi_chipselect; - sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; -- sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; -+ sp->bitbang.setup_transfer = ath79_spi_setup_transfer; - sp->bitbang.flags = SPI_CS_HIGH; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -@@ -287,7 +400,8 @@ static int ath79_spi_probe(struct platfo - if (ret) - goto err_clk_put; - -- rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ); -+ sp->ahb_rate = clk_get_rate(sp->clk); -+ rate = DIV_ROUND_UP(sp->ahb_rate, MHZ); - if (!rate) { - ret = -EINVAL; - goto err_clk_disable; ---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -@@ -24,6 +24,7 @@ enum ath79_spi_cs_type { - struct ath79_spi_controller_data { - enum ath79_spi_cs_type cs_type; - unsigned cs_line; -+ bool is_flash; - }; - - #endif /* _ATH79_SPI_PLATFORM_H */ diff --git a/target/linux/ar71xx/patches-3.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-3.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch deleted file mode 100644 index 520c652..0000000 --- a/target/linux/ar71xx/patches-3.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch +++ /dev/null @@ -1,111 +0,0 @@ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h -@@ -0,0 +1,37 @@ -+/* -+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H -+#define __ASM_MACH_ATH79_MANGLE_PORT_H -+ -+#ifdef CONFIG_PCI -+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port); -+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port); -+#else -+#define ath79_pci_swizzle_b(port) (port) -+#define ath79_pci_swizzle_w(port) (port) -+#endif -+ -+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port) -+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port) -+#define __swizzle_addr_l(port) (port) -+#define __swizzle_addr_q(port) (port) -+ -+# define ioswabb(a, x) (x) -+# define __mem_ioswabb(a, x) (x) -+# define ioswabw(a, x) (x) -+# define __mem_ioswabw(a, x) cpu_to_le16(x) -+# define ioswabl(a, x) (x) -+# define __mem_ioswabl(a, x) cpu_to_le32(x) -+# define ioswabq(a, x) (x) -+# define __mem_ioswabq(a, x) cpu_to_le64(x) -+ -+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */ ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -13,6 +13,7 @@ - */ - - #include <linux/init.h> -+#include <linux/export.h> - #include <linux/pci.h> - #include <linux/resource.h> - #include <linux/platform_device.h> -@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st - static const struct ath79_pci_irq *ath79_pci_irq_map __initdata; - static unsigned ath79_pci_nr_irqs __initdata; - -+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port); -+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port); -+ - static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = { - { - .slot = 17, -@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id, - return pdev; - } - -+static inline bool ar71xx_is_pci_addr(unsigned long port) -+{ -+ unsigned long phys = CPHYSADDR(port); -+ -+ return (phys >= AR71XX_PCI_MEM_BASE && -+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE); -+} -+ -+static unsigned long ar71xx_pci_swizzle_b(unsigned long port) -+{ -+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port; -+} -+ -+static unsigned long ar71xx_pci_swizzle_w(unsigned long port) -+{ -+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port; -+} -+ -+unsigned long ath79_pci_swizzle_b(unsigned long port) -+{ -+ if (__ath79_pci_swizzle_b) -+ return __ath79_pci_swizzle_b(port); -+ -+ return port; -+} -+EXPORT_SYMBOL(ath79_pci_swizzle_b); -+ -+unsigned long ath79_pci_swizzle_w(unsigned long port) -+{ -+ if (__ath79_pci_swizzle_w) -+ return __ath79_pci_swizzle_w(port); -+ -+ return port; -+} -+EXPORT_SYMBOL(ath79_pci_swizzle_w); -+ - int __init ath79_register_pci(void) - { - struct platform_device *pdev = NULL; - - if (soc_is_ar71xx()) { - pdev = ath79_register_pci_ar71xx(); -+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b; -+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w; - } else if (soc_is_ar724x()) { - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, diff --git a/target/linux/ar71xx/patches-3.10/480-ar913x_wmac_external_reset.patch b/target/linux/ar71xx/patches-3.10/480-ar913x_wmac_external_reset.patch deleted file mode 100644 index 9b704a3..0000000 --- a/target/linux/ar71xx/patches-3.10/480-ar913x_wmac_external_reset.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac - }, - }; - --static void __init ar913x_wmac_setup(void) -+static int ar913x_wmac_reset(void) - { - /* reset the WMAC */ - ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); -@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi - ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); - mdelay(10); - -+ return 0; -+} -+ -+static void __init ar913x_wmac_setup(void) -+{ -+ ar913x_wmac_reset(); -+ - ath79_wmac_resources[0].start = AR913X_WMAC_BASE; - ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); - ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); -+ -+ ath79_wmac_data.external_reset = ar913x_wmac_reset; - } - - diff --git a/target/linux/ar71xx/patches-3.10/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ar71xx/patches-3.10/490-usb-ehci-add-quirks-for-qca-socs.patch deleted file mode 100644 index fcbf51b..0000000 --- a/target/linux/ar71xx/patches-3.10/490-usb-ehci-add-quirks-for-qca-socs.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -249,6 +249,37 @@ static int ehci_reset (struct ehci_hcd * - command |= CMD_RESET; - dbg_cmd (ehci, "reset", command); - ehci_writel(ehci, command, &ehci->regs->command); -+ -+ if (ehci->qca_force_host_mode) { -+ u32 usbmode; -+ -+ udelay(1000); -+ -+ usbmode = ehci_readl(ehci, &ehci->regs->usbmode); -+ usbmode |= USBMODE_CM_HC | (1 << 4); -+ ehci_writel(ehci, usbmode, &ehci->regs->usbmode); -+ -+ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n", -+ ehci_readl(ehci, &ehci->regs->usbmode)); -+ } -+ -+ if (ehci->qca_force_16bit_ptw) { -+ u32 port_status; -+ -+ udelay(1000); -+ -+ /* enable 16-bit UTMI interface */ -+ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]); -+ port_status |= BIT(28); -+ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]); -+ -+ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n", -+ ehci_readl(ehci, &ehci->regs->port_status[0])); -+ } -+ -+ if (ehci->reset_notifier) -+ ehci->reset_notifier(ehci_to_hcd(ehci)); -+ - ehci->rh_state = EHCI_RH_HALTED; - ehci->next_statechange = jiffies; - retval = handshake (ehci, &ehci->regs->command, ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -202,6 +202,10 @@ struct ehci_hcd { /* one per controlle - unsigned need_oc_pp_cycle:1; /* MPC834X port power */ - unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ - unsigned ignore_oc:1; -+ unsigned qca_force_host_mode:1; -+ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */ -+ -+ void (*reset_notifier)(struct usb_hcd *hcd); - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) ---- a/include/linux/usb/ehci_pdriver.h -+++ b/include/linux/usb/ehci_pdriver.h -@@ -43,6 +43,8 @@ struct usb_ehci_pdata { - unsigned big_endian_mmio:1; - unsigned no_io_watchdog:1; - unsigned ignore_oc:1; -+ unsigned qca_force_host_mode:1; -+ unsigned qca_force_16bit_ptw:1; - - /* Turn on all power and clocks */ - int (*power_on)(struct platform_device *pdev); -@@ -51,6 +53,7 @@ struct usb_ehci_pdata { - /* Turn on only VBUS suspend power and hotplug detection, - * turn off everything else */ - void (*power_suspend)(struct platform_device *pdev); -+ void (*reset_notifier)(struct platform_device *pdev); - }; - - #endif /* __USB_CORE_EHCI_PDRIVER_H */ ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -36,6 +36,14 @@ - - static const char hcd_name[] = "ehci-platform"; - -+static void ehci_platform_reset_notifier(struct usb_hcd *hcd) -+{ -+ struct platform_device *pdev = to_platform_device(hcd->self.controller); -+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; -+ -+ pdata->reset_notifier(pdev); -+} -+ - static int ehci_platform_reset(struct usb_hcd *hcd) - { - struct platform_device *pdev = to_platform_device(hcd->self.controller); -@@ -48,6 +56,11 @@ static int ehci_platform_reset(struct us - ehci->big_endian_desc = pdata->big_endian_desc; - ehci->big_endian_mmio = pdata->big_endian_mmio; - ehci->ignore_oc = pdata->ignore_oc; -+ ehci->qca_force_host_mode = pdata->qca_force_host_mode; -+ ehci->qca_force_16bit_ptw = pdata->qca_force_16bit_ptw; -+ -+ if (pdata->reset_notifier) -+ ehci->reset_notifier = ehci_platform_reset_notifier; - - ehci->caps = hcd->regs + pdata->caps_offset; - retval = ehci_setup(hcd); diff --git a/target/linux/ar71xx/patches-3.10/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-3.10/500-MIPS-fw-myloader.patch deleted file mode 100644 index dff5fbe..0000000 --- a/target/linux/ar71xx/patches-3.10/500-MIPS-fw-myloader.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -183,6 +183,7 @@ endif - # - libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -998,6 +998,9 @@ config MIPS_MSC - config MIPS_NILE4 - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - diff --git a/target/linux/ar71xx/patches-3.10/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.10/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch deleted file mode 100644 index d9b8682..0000000 --- a/target/linux/ar71xx/patches-3.10/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch +++ /dev/null @@ -1,81 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -15,6 +15,7 @@ - #include <linux/init.h> - #include <linux/delay.h> - #include <linux/irq.h> -+#include <linux/etherdevice.h> - #include <linux/platform_device.h> - #include <linux/ath9k_platform.h> - -@@ -22,6 +23,7 @@ - #include <asm/mach-ath79/ar71xx_regs.h> - #include "dev-wmac.h" - -+static u8 ath79_wmac_mac[ETH_ALEN]; - static struct ath9k_platform_data ath79_wmac_data; - - static struct resource ath79_wmac_resources[] = { -@@ -160,7 +162,7 @@ static void qca955x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = true; - } - --void __init ath79_register_wmac(u8 *cal_data) -+void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) - ar913x_wmac_setup(); -@@ -177,5 +179,10 @@ void __init ath79_register_wmac(u8 *cal_ - memcpy(ath79_wmac_data.eeprom_data, cal_data, - sizeof(ath79_wmac_data.eeprom_data)); - -+ if (mac_addr) { -+ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac)); -+ ath79_wmac_data.macaddr = ath79_wmac_mac; -+ } -+ - platform_device_register(&ath79_wmac_device); - } ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -12,6 +12,6 @@ - #ifndef _ATH79_DEV_WMAC_H - #define _ATH79_DEV_WMAC_H - --void ath79_register_wmac(u8 *cal_data); -+void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - - #endif /* _ATH79_DEV_WMAC_H */ ---- a/arch/mips/ath79/mach-ap81.c -+++ b/arch/mips/ath79/mach-ap81.c -@@ -98,7 +98,7 @@ static void __init ap81_setup(void) - ap81_gpio_keys); - ath79_register_spi(&ap81_spi_data, ap81_spi_info, - ARRAY_SIZE(ap81_spi_info)); -- ath79_register_wmac(cal_data); -+ ath79_register_wmac(cal_data, NULL); - ath79_register_usb(); - } - ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -134,7 +134,7 @@ static void __init db120_setup(void) - ath79_register_spi(&db120_spi_data, db120_spi_info, - ARRAY_SIZE(db120_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); -+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); - db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); - } - ---- a/arch/mips/ath79/mach-ap121.c -+++ b/arch/mips/ath79/mach-ap121.c -@@ -91,7 +91,7 @@ static void __init ap121_setup(void) - ath79_register_spi(&ap121_spi_data, ap121_spi_info, - ARRAY_SIZE(ap121_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(cal_data); -+ ath79_register_wmac(cal_data, NULL); - } - - MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", diff --git a/target/linux/ar71xx/patches-3.10/502-MIPS-ath79-export-ath79_gpio_base.patch b/target/linux/ar71xx/patches-3.10/502-MIPS-ath79-export-ath79_gpio_base.patch deleted file mode 100644 index 73eb8e1..0000000 --- a/target/linux/ar71xx/patches-3.10/502-MIPS-ath79-export-ath79_gpio_base.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -25,7 +25,9 @@ - #include <asm/mach-ath79/ath79.h> - #include "common.h" - --static void __iomem *ath79_gpio_base; -+void __iomem *ath79_gpio_base; -+EXPORT_SYMBOL_GPL(ath79_gpio_base); -+ - static unsigned long ath79_gpio_count; - static DEFINE_SPINLOCK(ath79_gpio_lock); - ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -116,6 +116,7 @@ static inline int soc_is_qca955x(void) - } - - extern void __iomem *ath79_ddr_base; -+extern void __iomem *ath79_gpio_base; - extern void __iomem *ath79_pll_base; - extern void __iomem *ath79_reset_base; - diff --git a/target/linux/ar71xx/patches-3.10/503-MIPS-ath79-add-flash-acquire-release.patch b/target/linux/ar71xx/patches-3.10/503-MIPS-ath79-add-flash-acquire-release.patch deleted file mode 100644 index 06f7902..0000000 --- a/target/linux/ar71xx/patches-3.10/503-MIPS-ath79-add-flash-acquire-release.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -22,6 +22,7 @@ - #include "common.h" - - static DEFINE_SPINLOCK(ath79_device_reset_lock); -+static DEFINE_MUTEX(ath79_flash_mutex); - - u32 ath79_cpu_freq; - EXPORT_SYMBOL_GPL(ath79_cpu_freq); -@@ -111,3 +112,16 @@ void ath79_device_reset_clear(u32 mask) - spin_unlock_irqrestore(&ath79_device_reset_lock, flags); - } - EXPORT_SYMBOL_GPL(ath79_device_reset_clear); -+ -+void ath79_flash_acquire(void) -+{ -+ mutex_lock(&ath79_flash_mutex); -+} -+EXPORT_SYMBOL_GPL(ath79_flash_acquire); -+ -+void ath79_flash_release(void) -+{ -+ mutex_unlock(&ath79_flash_mutex); -+} -+EXPORT_SYMBOL_GPL(ath79_flash_release); -+ ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -143,4 +143,7 @@ static inline u32 ath79_reset_rr(unsigne - void ath79_device_reset_set(u32 mask); - void ath79_device_reset_clear(u32 mask); - -+void ath79_flash_acquire(void); -+void ath79_flash_release(void); -+ - #endif /* __ASM_MACH_ATH79_H */ diff --git a/target/linux/ar71xx/patches-3.10/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-3.10/504-MIPS-ath79-add-ath79_device_reset_get.patch deleted file mode 100644 index 024a85d..0000000 --- a/target/linux/ar71xx/patches-3.10/504-MIPS-ath79-add-ath79_device_reset_get.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -142,6 +142,7 @@ static inline u32 ath79_reset_rr(unsigne - - void ath79_device_reset_set(u32 mask); - void ath79_device_reset_clear(u32 mask); -+u32 ath79_device_reset_get(u32 mask); - - void ath79_flash_acquire(void); - void ath79_flash_release(void); ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -113,6 +113,32 @@ void ath79_device_reset_clear(u32 mask) - } - EXPORT_SYMBOL_GPL(ath79_device_reset_clear); - -+u32 ath79_device_reset_get(u32 mask) -+{ -+ unsigned long flags; -+ u32 reg; -+ u32 ret; -+ -+ if (soc_is_ar71xx()) -+ reg = AR71XX_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar724x()) -+ reg = AR724X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar913x()) -+ reg = AR913X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar933x()) -+ reg = AR933X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar934x()) -+ reg = AR934X_RESET_REG_RESET_MODULE; -+ else -+ BUG(); -+ -+ spin_lock_irqsave(&ath79_device_reset_lock, flags); -+ ret = ath79_reset_rr(reg); -+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags); -+ return ret; -+} -+EXPORT_SYMBOL_GPL(ath79_device_reset_get); -+ - void ath79_flash_acquire(void) - { - mutex_lock(&ath79_flash_mutex); diff --git a/target/linux/ar71xx/patches-3.10/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-3.10/505-MIPS-ath79-add-ath79_gpio_function_select.patch deleted file mode 100644 index 9e11381..0000000 --- a/target/linux/ar71xx/patches-3.10/505-MIPS-ath79-add-ath79_gpio_function_select.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/arch/mips/ath79/common.h -+++ b/arch/mips/ath79/common.h -@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg - void ath79_gpio_function_enable(u32 mask); - void ath79_gpio_function_disable(u32 mask); - void ath79_gpio_function_setup(u32 set, u32 clear); -+void ath79_gpio_output_select(unsigned gpio, u8 val); - void ath79_gpio_init(void); - - #endif /* __ATH79_COMMON_H */ ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -180,6 +180,34 @@ void ath79_gpio_function_disable(u32 mas - ath79_gpio_function_setup(0, mask); - } - -+void __init ath79_gpio_output_select(unsigned gpio, u8 val) -+{ -+ void __iomem *base = ath79_gpio_base; -+ unsigned long flags; -+ unsigned int reg; -+ u32 t, s; -+ -+ BUG_ON(!soc_is_ar934x()); -+ -+ if (gpio >= AR934X_GPIO_COUNT) -+ return; -+ -+ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); -+ s = 8 * (gpio % 4); -+ -+ spin_lock_irqsave(&ath79_gpio_lock, flags); -+ -+ t = __raw_readl(base + reg); -+ t &= ~(0xff << s); -+ t |= val << s; -+ __raw_writel(t, base + reg); -+ -+ /* flush write */ -+ (void) __raw_readl(base + reg); -+ -+ spin_unlock_irqrestore(&ath79_gpio_lock, flags); -+} -+ - void __init ath79_gpio_init(void) - { - int err; diff --git a/target/linux/ar71xx/patches-3.10/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-3.10/506-MIPS-ath79-prom-parse-redboot-args.patch deleted file mode 100644 index aab959b..0000000 --- a/target/linux/ar71xx/patches-3.10/506-MIPS-ath79-prom-parse-redboot-args.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -19,6 +19,8 @@ - - #include "common.h" - -+static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata; -+ - static inline int is_valid_ram_addr(void *addr) - { - if (((u32) addr > KSEG0) && -@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void - return 0; - } - -+static void __init ath79_prom_append_cmdline(const char *name, -+ const char *value) -+{ -+ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf), -+ " %s=%s", name, value); -+ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); -+} -+ -+static const char * __init ath79_prom_find_env(char **envp, const char *name) -+{ -+ const char *ret = NULL; -+ int len; -+ char **p; -+ -+ if (!is_valid_ram_addr(envp)) -+ return NULL; -+ -+ len = strlen(name); -+ for (p = envp; is_valid_ram_addr(*p); p++) { -+ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') { -+ ret = *p + len + 1; -+ break; -+ } -+ -+ /* RedBoot env comes in pointer pairs - key, value */ -+ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0) -+ if (is_valid_ram_addr(*(++p))) { -+ ret = *p; -+ break; -+ } -+ } -+ -+ return ret; -+} -+ - static __init void ath79_prom_init_cmdline(int argc, char **argv) - { - int i; -@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli - - void __init prom_init(void) - { -+ const char *env; -+ char **envp; -+ - ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1); -+ -+ envp = (char **)fw_arg2; -+ if (!strstr(arcs_cmdline, "ethaddr=")) { -+ env = ath79_prom_find_env(envp, "ethaddr"); -+ if (env) -+ ath79_prom_append_cmdline("ethaddr", env); -+ } -+ -+ if (!strstr(arcs_cmdline, "board=")) { -+ env = ath79_prom_find_env(envp, "board"); -+ if (env) { -+ /* Workaround for buggy bootloaders */ -+ if (strcmp(env, "RouterStation") == 0 || -+ strcmp(env, "Ubiquiti AR71xx-based board") == 0) -+ env = "UBNT-RS"; -+ -+ if (strcmp(env, "RouterStation PRO") == 0) -+ env = "UBNT-RSPRO"; -+ -+ ath79_prom_append_cmdline("board", env); -+ } -+ } - } - - void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-3.10/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-3.10/507-MIPS-ath79-prom-add-myloader-support.patch deleted file mode 100644 index 67c1faf..0000000 --- a/target/linux/ar71xx/patches-3.10/507-MIPS-ath79-prom-add-myloader-support.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -16,6 +16,7 @@ - - #include <asm/bootinfo.h> - #include <asm/addrspace.h> -+#include <asm/fw/myloader/myloader.h> - - #include "common.h" - -@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi - return ret; - } - -+static int __init ath79_prom_init_myloader(void) -+{ -+ struct myloader_info *mylo; -+ char mac_buf[32]; -+ unsigned char *mac; -+ -+ mylo = myloader_get_info(); -+ if (!mylo) -+ return 0; -+ -+ switch (mylo->did) { -+ case DEVID_COMPEX_WP543: -+ ath79_prom_append_cmdline("board", "WP543"); -+ break; -+ case DEVID_COMPEX_WPE72: -+ ath79_prom_append_cmdline("board", "WPE72"); -+ break; -+ default: -+ pr_warn("prom: unknown device id: %x\n", mylo->did); -+ return 0; -+ } -+ -+ mac = mylo->macs[0]; -+ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", -+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); -+ -+ ath79_prom_append_cmdline("ethaddr", mac_buf); -+ -+ return 1; -+} -+ - static __init void ath79_prom_init_cmdline(int argc, char **argv) - { - int i; -@@ -88,6 +120,9 @@ void __init prom_init(void) - const char *env; - char **envp; - -+ if (ath79_prom_init_myloader()) -+ return; -+ - ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1); - - envp = (char **)fw_arg2; diff --git a/target/linux/ar71xx/patches-3.10/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-3.10/508-MIPS-ath79-prom-image-command-line-hack.patch deleted file mode 100644 index 72a3b56..0000000 --- a/target/linux/ar71xx/patches-3.10/508-MIPS-ath79-prom-image-command-line-hack.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi - return ret; - } - -+#ifdef CONFIG_IMAGE_CMDLINE_HACK -+extern char __image_cmdline[]; -+ -+static int __init ath79_use_image_cmdline(void) -+{ -+ char *p = __image_cmdline; -+ int replace = 0; -+ -+ if (*p == '-') { -+ replace = 1; -+ p++; -+ } -+ -+ if (*p == '\0') -+ return 0; -+ -+ if (replace) { -+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); -+ } else { -+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); -+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); -+ } -+ -+ return 1; -+} -+#else -+static inline int ath79_use_image_cmdline(void) { return 0; } -+#endif -+ - static int __init ath79_prom_init_myloader(void) - { - struct myloader_info *mylo; -@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload - - ath79_prom_append_cmdline("ethaddr", mac_buf); - -+ ath79_use_image_cmdline(); -+ - return 1; - } - -@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli - { - int i; - -+ if (ath79_use_image_cmdline()) -+ return; -+ - if (!is_valid_ram_addr(argv)) - return; - diff --git a/target/linux/ar71xx/patches-3.10/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-3.10/509-MIPS-ath79-process-board-kernel-option.patch deleted file mode 100644 index fa6170c..0000000 --- a/target/linux/ar71xx/patches-3.10/509-MIPS-ath79-process-board-kernel-option.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -218,6 +218,8 @@ void __init plat_time_init(void) - mips_hpt_frequency = clk_get_rate(clk) / 2; - } - -+__setup("board=", mips_machtype_setup); -+ - static int __init ath79_setup(void) - { - ath79_gpio_init(); diff --git a/target/linux/ar71xx/patches-3.10/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-3.10/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch deleted file mode 100644 index 2d2235e..0000000 --- a/target/linux/ar71xx/patches-3.10/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -24,7 +24,10 @@ - #include "dev-wmac.h" - - static u8 ath79_wmac_mac[ETH_ALEN]; --static struct ath9k_platform_data ath79_wmac_data; -+ -+static struct ath9k_platform_data ath79_wmac_data = { -+ .led_pin = -1, -+}; - - static struct resource ath79_wmac_resources[] = { - { diff --git a/target/linux/ar71xx/patches-3.10/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-3.10/520-MIPS-ath79-enable-UART-function.patch deleted file mode 100644 index 1cb407f..0000000 --- a/target/linux/ar71xx/patches-3.10/520-MIPS-ath79-enable-UART-function.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -87,6 +87,15 @@ void __init ath79_register_uart(void) - if (IS_ERR(clk)) - panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); - -+ if (soc_is_ar71xx()) -+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar724x()) -+ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar913x()) -+ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar933x()) -+ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN); -+ - if (soc_is_ar71xx() || - soc_is_ar724x() || - soc_is_ar913x() || diff --git a/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch deleted file mode 100644 index a6e84c5..0000000 --- a/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned - /* nothing to do */ - } - -+static void prom_enable_uart(u32 id) -+{ -+ void __iomem *gpio_base; -+ u32 uart_en; -+ u32 t; -+ -+ switch (id) { -+ case REV_ID_MAJOR_AR71XX: -+ uart_en = AR71XX_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR7240: -+ case REV_ID_MAJOR_AR7241: -+ case REV_ID_MAJOR_AR7242: -+ uart_en = AR724X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR913X: -+ uart_en = AR913X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR9330: -+ case REV_ID_MAJOR_AR9331: -+ uart_en = AR933X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR9341: -+ case REV_ID_MAJOR_AR9342: -+ case REV_ID_MAJOR_AR9344: -+ /* TODO */ -+ default: -+ return; -+ } -+ -+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE)); -+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC); -+ t |= uart_en; -+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC); -+} -+ - static void prom_putchar_init(void) - { - void __iomem *base; -@@ -86,8 +126,10 @@ static void prom_putchar_init(void) - - default: - _prom_putchar = prom_putchar_dummy; -- break; -+ return; - } -+ -+ prom_enable_uart(id); - } - - void prom_putchar(unsigned char ch) diff --git a/target/linux/ar71xx/patches-3.10/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-3.10/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch deleted file mode 100644 index 74928e6..0000000 --- a/target/linux/ar71xx/patches-3.10/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -189,3 +189,9 @@ void __init ath79_register_wmac(u8 *cal_ - - platform_device_register(&ath79_wmac_device); - } -+ -+void __init ath79_register_wmac_simple(void) -+{ -+ ath79_register_wmac(NULL, NULL); -+ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom"; -+} ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -13,5 +13,6 @@ - #define _ATH79_DEV_WMAC_H - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); -+void ath79_register_wmac_simple(void); - - #endif /* _ATH79_DEV_WMAC_H */ diff --git a/target/linux/ar71xx/patches-3.10/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-3.10/523-MIPS-ath79-OTP-support.patch deleted file mode 100644 index 0672cf1..0000000 --- a/target/linux/ar71xx/patches-3.10/523-MIPS-ath79-OTP-support.patch +++ /dev/null @@ -1,166 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -165,6 +165,137 @@ static void qca955x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = true; - } - -+static bool __init -+ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data) -+{ -+ int timeout = 1000; -+ u32 val; -+ -+ __raw_readl(base + AR9300_OTP_BASE + (4 * addr)); -+ while (timeout--) { -+ val = __raw_readl(base + AR9300_OTP_STATUS); -+ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID) -+ break; -+ -+ udelay(10); -+ } -+ -+ if (!timeout) -+ return false; -+ -+ *data = __raw_readl(base + AR9300_OTP_READ_DATA); -+ return true; -+} -+ -+static bool __init -+ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len) -+{ -+ u32 data; -+ int i; -+ -+ for (i = 0; i < len; i++) { -+ int offset = 8 * ((addr - i) % 4); -+ -+ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data)) -+ return false; -+ -+ dest[i] = (data >> offset) & 0xff; -+ } -+ -+ return true; -+} -+ -+static bool __init -+ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest, -+ int dest_start, int dest_len) -+{ -+ int dest_bytes = 0; -+ int offset = 0; -+ int end = addr - len; -+ u8 hdr[2]; -+ -+ while (addr > end) { -+ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2)) -+ return false; -+ -+ addr -= 2; -+ offset += hdr[0]; -+ -+ if (offset <= dest_start + dest_len && -+ offset + len >= dest_start) { -+ int data_offset = 0; -+ int dest_offset = 0; -+ int copy_len; -+ -+ if (offset < dest_start) -+ data_offset = dest_start - offset; -+ else -+ dest_offset = offset - dest_start; -+ -+ copy_len = len - data_offset; -+ if (copy_len > dest_len - dest_offset) -+ copy_len = dest_len - dest_offset; -+ -+ ar93xx_wmac_otp_read(base, addr - data_offset, -+ dest + dest_offset, -+ copy_len); -+ -+ dest_bytes += copy_len; -+ } -+ addr -= hdr[1]; -+ } -+ return !!dest_bytes; -+} -+ -+bool __init ar93xx_wmac_read_mac_address(u8 *dest) -+{ -+ void __iomem *base; -+ bool ret = false; -+ int addr = 0x1ff; -+ unsigned int len; -+ u32 hdr_u32; -+ u8 *hdr = (u8 *) &hdr_u32; -+ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 }; -+ int mac_start = 2, mac_end = 8; -+ -+ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x()); -+ base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE); -+ while (addr > sizeof(hdr)) { -+ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr))) -+ break; -+ -+ if (hdr_u32 == 0 || hdr_u32 == ~0) -+ break; -+ -+ len = (hdr[1] << 4) | (hdr[2] >> 4); -+ addr -= 4; -+ -+ switch (hdr[0] >> 5) { -+ case 0: -+ if (len < mac_end) -+ break; -+ -+ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6); -+ ret = true; -+ break; -+ case 3: -+ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac, -+ mac_start, 6); -+ break; -+ default: -+ break; -+ } -+ -+ addr -= len + 2; -+ } -+ -+ iounmap(base); -+ if (ret) -+ memcpy(dest, mac, 6); -+ -+ return ret; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -14,5 +14,6 @@ - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - void ath79_register_wmac_simple(void); -+bool ar93xx_wmac_read_mac_address(u8 *dest); - - #endif /* _ATH79_DEV_WMAC_H */ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -113,6 +113,14 @@ - #define QCA955X_EHCI1_BASE 0x1b400000 - #define QCA955X_EHCI_SIZE 0x1000 - -+#define AR9300_OTP_BASE 0x14000 -+#define AR9300_OTP_STATUS 0x15f18 -+#define AR9300_OTP_STATUS_TYPE 0x7 -+#define AR9300_OTP_STATUS_VALID 0x4 -+#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 -+#define AR9300_OTP_STATUS_SM_BUSY 0x1 -+#define AR9300_OTP_READ_DATA 0x15f1c -+ - /* - * DDR_CTRL block - */ diff --git a/target/linux/ar71xx/patches-3.10/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-3.10/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch deleted file mode 100644 index 7b4b6ef..0000000 --- a/target/linux/ar71xx/patches-3.10/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -296,6 +296,16 @@ bool __init ar93xx_wmac_read_mac_address - return ret; - } - -+void __init ath79_wmac_disable_2ghz(void) -+{ -+ ath79_wmac_data.disable_2ghz = true; -+} -+ -+void __init ath79_wmac_disable_5ghz(void) -+{ -+ ath79_wmac_data.disable_5ghz = true; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -14,6 +14,9 @@ - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - void ath79_register_wmac_simple(void); -+void ath79_wmac_disable_2ghz(void); -+void ath79_wmac_disable_5ghz(void); -+ - bool ar93xx_wmac_read_mac_address(u8 *dest); - - #endif /* _ATH79_DEV_WMAC_H */ diff --git a/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch deleted file mode 100644 index 696ad33..0000000 --- a/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_ - static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { - .caps_offset = 0x100, - .has_tt = 1, -+ .qca_force_host_mode = 1, -+ .qca_force_16bit_ptw = 1, - }; - - static void __init ath79_usb_register(const char *name, int id, -@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void - ath79_device_reset_clear(AR913X_RESET_USB_PHY); - mdelay(10); - -+ ath79_ehci_pdata_v2.qca_force_host_mode = 0; -+ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 0; -+ - ath79_usb_register("ehci-platform", -1, - AR913X_EHCI_BASE, AR913X_EHCI_SIZE, - ATH79_CPU_IRQ(3), -@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - --static void __init ar934x_usb_setup(void) -+static void enable_tx_tx_idp_violation_fix(unsigned base) - { -- u32 bootstrap; -+ void __iomem *phy_reg; -+ u32 t; - -- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) -+ phy_reg = ioremap(base, 4); -+ if (!phy_reg) - return; - -+ t = ioread32(phy_reg); -+ t &= ~0xff; -+ t |= 0x58; -+ iowrite32(t, phy_reg); -+ -+ iounmap(phy_reg); -+} -+ -+static void ar934x_usb_reset_notifier(struct platform_device *pdev) -+{ -+ if (pdev->id != -1) -+ return; -+ -+ enable_tx_tx_idp_violation_fix(0x18116c94); -+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); -+} -+ -+static void __init ar934x_usb_setup(void) -+{ - ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); - udelay(1000); - -@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void - ath79_device_reset_clear(AR934X_RESET_USB_HOST); - udelay(1000); - -+ if (ath79_soc_rev >= 3) -+ ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier; -+ - ath79_usb_register("ehci-platform", -1, - AR934X_EHCI_BASE, AR934X_EHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - -+static void qca955x_usb_reset_notifier(struct platform_device *pdev) -+{ -+ u32 base; -+ -+ switch (pdev->id) { -+ case 0: -+ base = 0x18116c94; -+ break; -+ -+ case 1: -+ base = 0x18116e54; -+ break; -+ -+ default: -+ return; -+ } -+ -+ enable_tx_tx_idp_violation_fix(base); -+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); -+} -+ - static void __init qca955x_usb_setup(void) - { -+ ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier; -+ - ath79_usb_register("ehci-platform", 0, - QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, - ATH79_IP3_IRQ(0), diff --git a/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch deleted file mode 100644 index 214aa73..0000000 --- a/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch +++ /dev/null @@ -1,359 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -21,6 +21,10 @@ - #include <linux/bitops.h> - - #define AR71XX_APB_BASE 0x18000000 -+#define AR71XX_GE0_BASE 0x19000000 -+#define AR71XX_GE0_SIZE 0x10000 -+#define AR71XX_GE1_BASE 0x1a000000 -+#define AR71XX_GE1_SIZE 0x10000 - #define AR71XX_EHCI_BASE 0x1b000000 - #define AR71XX_EHCI_SIZE 0x1000 - #define AR71XX_OHCI_BASE 0x1c000000 -@@ -40,6 +44,8 @@ - #define AR71XX_PLL_SIZE 0x100 - #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) - #define AR71XX_RESET_SIZE 0x100 -+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR71XX_MII_SIZE 0x100 - - #define AR71XX_PCI_MEM_BASE 0x10000000 - #define AR71XX_PCI_MEM_SIZE 0x07000000 -@@ -82,15 +88,21 @@ - - #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) - #define AR933X_UART_SIZE 0x14 -+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR933X_GMAC_SIZE 0x04 - #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR933X_WMAC_SIZE 0x20000 - #define AR933X_EHCI_BASE 0x1b000000 - #define AR933X_EHCI_SIZE 0x1000 - -+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR934X_GMAC_SIZE 0x14 - #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR934X_WMAC_SIZE 0x20000 - #define AR934X_EHCI_BASE 0x1b000000 - #define AR934X_EHCI_SIZE 0x200 -+#define AR934X_NFC_BASE 0x1b000200 -+#define AR934X_NFC_SIZE 0xb8 - #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) - #define AR934X_SRIF_SIZE 0x1000 - -@@ -107,11 +119,15 @@ - #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) - #define QCA955X_PCI_CTRL_SIZE 0x100 - -+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA955X_GMAC_SIZE 0x40 - #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define QCA955X_WMAC_SIZE 0x20000 - #define QCA955X_EHCI0_BASE 0x1b000000 - #define QCA955X_EHCI1_BASE 0x1b400000 - #define QCA955X_EHCI_SIZE 0x1000 -+#define QCA955X_NFC_BASE 0x1b800200 -+#define QCA955X_NFC_SIZE 0xb8 - - #define AR9300_OTP_BASE 0x14000 - #define AR9300_OTP_STATUS 0x15f18 -@@ -175,6 +191,9 @@ - #define AR71XX_AHB_DIV_SHIFT 20 - #define AR71XX_AHB_DIV_MASK 0x7 - -+#define AR71XX_ETH0_PLL_SHIFT 17 -+#define AR71XX_ETH1_PLL_SHIFT 19 -+ - #define AR724X_PLL_REG_CPU_CONFIG 0x00 - #define AR724X_PLL_REG_PCIE_CONFIG 0x18 - -@@ -187,6 +206,8 @@ - #define AR724X_DDR_DIV_SHIFT 22 - #define AR724X_DDR_DIV_MASK 0x3 - -+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c -+ - #define AR913X_PLL_REG_CPU_CONFIG 0x00 - #define AR913X_PLL_REG_ETH_CONFIG 0x04 - #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 -@@ -199,6 +220,9 @@ - #define AR913X_AHB_DIV_SHIFT 19 - #define AR913X_AHB_DIV_MASK 0x1 - -+#define AR913X_ETH0_PLL_SHIFT 20 -+#define AR913X_ETH1_PLL_SHIFT 22 -+ - #define AR933X_PLL_CPU_CONFIG_REG 0x00 - #define AR933X_PLL_CLOCK_CTRL_REG 0x08 - -@@ -220,6 +244,8 @@ - #define AR934X_PLL_CPU_CONFIG_REG 0x00 - #define AR934X_PLL_DDR_CONFIG_REG 0x04 - #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 -+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 -+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c - - #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -252,9 +278,13 @@ - #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) - #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) -+ - #define QCA955X_PLL_CPU_CONFIG_REG 0x00 - #define QCA955X_PLL_DDR_CONFIG_REG 0x04 - #define QCA955X_PLL_CLK_CTRL_REG 0x08 -+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 -+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 - - #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -379,16 +409,83 @@ - #define AR913X_RESET_USB_HOST BIT(5) - #define AR913X_RESET_USB_PHY BIT(4) - -+#define AR933X_RESET_GE1_MDIO BIT(23) -+#define AR933X_RESET_GE0_MDIO BIT(22) -+#define AR933X_RESET_GE1_MAC BIT(13) - #define AR933X_RESET_WMAC BIT(11) -+#define AR933X_RESET_GE0_MAC BIT(9) - #define AR933X_RESET_USB_HOST BIT(5) - #define AR933X_RESET_USB_PHY BIT(4) - #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -+#define AR934X_RESET_HOST BIT(31) -+#define AR934X_RESET_SLIC BIT(30) -+#define AR934X_RESET_HDMA BIT(29) -+#define AR934X_RESET_EXTERNAL BIT(28) -+#define AR934X_RESET_RTC BIT(27) -+#define AR934X_RESET_PCIE_EP_INT BIT(26) -+#define AR934X_RESET_CHKSUM_ACC BIT(25) -+#define AR934X_RESET_FULL_CHIP BIT(24) -+#define AR934X_RESET_GE1_MDIO BIT(23) -+#define AR934X_RESET_GE0_MDIO BIT(22) -+#define AR934X_RESET_CPU_NMI BIT(21) -+#define AR934X_RESET_CPU_COLD BIT(20) -+#define AR934X_RESET_HOST_RESET_INT BIT(19) -+#define AR934X_RESET_PCIE_EP BIT(18) -+#define AR934X_RESET_UART1 BIT(17) -+#define AR934X_RESET_DDR BIT(16) -+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define AR934X_RESET_NANDF BIT(14) -+#define AR934X_RESET_GE1_MAC BIT(13) -+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) - #define AR934X_RESET_USB_PHY_ANALOG BIT(11) -+#define AR934X_RESET_HOST_DMA_INT BIT(10) -+#define AR934X_RESET_GE0_MAC BIT(9) -+#define AR934X_RESET_ETH_SWITCH BIT(8) -+#define AR934X_RESET_PCIE_PHY BIT(7) -+#define AR934X_RESET_PCIE BIT(6) - #define AR934X_RESET_USB_HOST BIT(5) - #define AR934X_RESET_USB_PHY BIT(4) - #define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -+#define AR934X_RESET_LUT BIT(2) -+#define AR934X_RESET_MBOX BIT(1) -+#define AR934X_RESET_I2S BIT(0) -+ -+#define QCA955X_RESET_HOST BIT(31) -+#define QCA955X_RESET_SLIC BIT(30) -+#define QCA955X_RESET_HDMA BIT(29) -+#define QCA955X_RESET_EXTERNAL BIT(28) -+#define QCA955X_RESET_RTC BIT(27) -+#define QCA955X_RESET_PCIE_EP_INT BIT(26) -+#define QCA955X_RESET_CHKSUM_ACC BIT(25) -+#define QCA955X_RESET_FULL_CHIP BIT(24) -+#define QCA955X_RESET_GE1_MDIO BIT(23) -+#define QCA955X_RESET_GE0_MDIO BIT(22) -+#define QCA955X_RESET_CPU_NMI BIT(21) -+#define QCA955X_RESET_CPU_COLD BIT(20) -+#define QCA955X_RESET_HOST_RESET_INT BIT(19) -+#define QCA955X_RESET_PCIE_EP BIT(18) -+#define QCA955X_RESET_UART1 BIT(17) -+#define QCA955X_RESET_DDR BIT(16) -+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define QCA955X_RESET_NANDF BIT(14) -+#define QCA955X_RESET_GE1_MAC BIT(13) -+#define QCA955X_RESET_SGMII_ANALOG BIT(12) -+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11) -+#define QCA955X_RESET_HOST_DMA_INT BIT(10) -+#define QCA955X_RESET_GE0_MAC BIT(9) -+#define QCA955X_RESET_SGMII BIT(8) -+#define QCA955X_RESET_PCIE_PHY BIT(7) -+#define QCA955X_RESET_PCIE BIT(6) -+#define QCA955X_RESET_USB_HOST BIT(5) -+#define QCA955X_RESET_USB_PHY BIT(4) -+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3) -+#define QCA955X_RESET_LUT BIT(2) -+#define QCA955X_RESET_MBOX BIT(1) -+#define QCA955X_RESET_I2S BIT(0) - -+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) -+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) - #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - - #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -@@ -530,6 +627,12 @@ - #define AR71XX_GPIO_REG_INT_ENABLE 0x24 - #define AR71XX_GPIO_REG_FUNC 0x28 - -+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c -+#define AR934X_GPIO_REG_OUT_FUNC1 0x30 -+#define AR934X_GPIO_REG_OUT_FUNC2 0x34 -+#define AR934X_GPIO_REG_OUT_FUNC3 0x38 -+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c -+#define AR934X_GPIO_REG_OUT_FUNC5 0x40 - #define AR934X_GPIO_REG_FUNC 0x6c - - #define AR71XX_GPIO_COUNT 16 -@@ -561,4 +664,149 @@ - #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 - #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 - -+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -+#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) -+ -+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -+#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR724X_GPIO_FUNC_UART_EN BIT(1) -+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) -+ -+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) -+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) -+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) -+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) -+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) -+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -+#define AR913X_GPIO_FUNC_UART_EN BIT(8) -+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) -+ -+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) -+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) -+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) -+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) -+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) -+#define AR933X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR933X_GPIO_FUNC_UART_EN BIT(1) -+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) -+ -+#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9) -+#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8) -+#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7) -+#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6) -+#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5) -+#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4) -+#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3) -+#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2) -+#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1) -+ -+#define AR934X_GPIO_OUT_GPIO 0 -+#define AR934X_GPIO_OUT_SPI_CS1 7 -+#define AR934X_GPIO_OUT_LED_LINK0 41 -+#define AR934X_GPIO_OUT_LED_LINK1 42 -+#define AR934X_GPIO_OUT_LED_LINK2 43 -+#define AR934X_GPIO_OUT_LED_LINK3 44 -+#define AR934X_GPIO_OUT_LED_LINK4 45 -+#define AR934X_GPIO_OUT_EXT_LNA0 46 -+#define AR934X_GPIO_OUT_EXT_LNA1 47 -+ -+/* -+ * MII_CTRL block -+ */ -+#define AR71XX_MII_REG_MII0_CTRL 0x00 -+#define AR71XX_MII_REG_MII1_CTRL 0x04 -+ -+#define AR71XX_MII_CTRL_IF_MASK 3 -+#define AR71XX_MII_CTRL_SPEED_SHIFT 4 -+#define AR71XX_MII_CTRL_SPEED_MASK 3 -+#define AR71XX_MII_CTRL_SPEED_10 0 -+#define AR71XX_MII_CTRL_SPEED_100 1 -+#define AR71XX_MII_CTRL_SPEED_1000 2 -+ -+#define AR71XX_MII0_CTRL_IF_GMII 0 -+#define AR71XX_MII0_CTRL_IF_MII 1 -+#define AR71XX_MII0_CTRL_IF_RGMII 2 -+#define AR71XX_MII0_CTRL_IF_RMII 3 -+ -+#define AR71XX_MII1_CTRL_IF_RGMII 0 -+#define AR71XX_MII1_CTRL_IF_RMII 1 -+ -+/* -+ * AR933X GMAC interface -+ */ -+#define AR933X_GMAC_REG_ETH_CFG 0x00 -+ -+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) -+#define AR933X_ETH_CFG_MII_GE0 BIT(1) -+#define AR933X_ETH_CFG_GMII_GE0 BIT(2) -+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) -+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) -+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) -+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) -+#define AR933X_ETH_CFG_RMII_GE0 BIT(9) -+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 -+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) -+ -+/* -+ * AR934X GMAC Interface -+ */ -+#define AR934X_GMAC_REG_ETH_CFG 0x00 -+ -+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) -+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) -+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) -+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) -+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) -+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) -+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) -+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) -+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) -+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) -+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) -+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+#define AR934X_ETH_CFG_RXD_DELAY BIT(14) -+#define AR934X_ETH_CFG_RDV_DELAY BIT(16) -+ -+/* -+ * QCA955X GMAC Interface -+ */ -+ -+#define QCA955X_GMAC_REG_ETH_CFG 0x00 -+ -+#define QCA955X_ETH_CFG_RGMII_EN BIT(0) -+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6) -+ - #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-3.10/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-3.10/602-MIPS-ath79-add-openwrt-stuff.patch deleted file mode 100644 index da284e2..0000000 --- a/target/linux/ar71xx/patches-3.10/602-MIPS-ath79-add-openwrt-stuff.patch +++ /dev/null @@ -1,76 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -106,6 +106,20 @@ config SOC_QCA955X - select PCI_AR724X if PCI - def_bool n - -+config ATH79_DEV_M25P80 -+ select ATH79_DEV_SPI -+ def_bool n -+ -+config ATH79_DEV_AP9X_PCI -+ select ATH79_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config ATH79_DEV_DSA -+ def_bool n -+ -+config ATH79_DEV_ETH -+ def_bool n -+ - config PCI_AR724X - def_bool n - -@@ -115,6 +129,10 @@ config ATH79_DEV_GPIO_BUTTONS - config ATH79_DEV_LEDS_GPIO - def_bool n - -+config ATH79_DEV_NFC -+ depends on (SOC_AR934X || SOC_QCA955X) -+ def_bool n -+ - config ATH79_DEV_SPI - def_bool n - -@@ -125,4 +143,13 @@ config ATH79_DEV_WMAC - depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) - def_bool n - -+config ATH79_NVRAM -+ def_bool n -+ -+config ATH79_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config ATH79_ROUTERBOOT -+ def_bool n -+ - endif ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI) += pci.o - # Devices - # - obj-y += dev-common.o -+obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o -+obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o -+obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o - obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o - obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o -+obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o -+obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o - obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o - obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o - obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o - - # -+# Miscellaneous objects -+# -+obj-$(CONFIG_ATH79_NVRAM) += nvram.o -+obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o -+obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o -+ -+# - # Machines - # - obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o diff --git a/target/linux/ar71xx/patches-3.10/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.10/603-MIPS-ath79-ap121-fixes.patch deleted file mode 100644 index b385b9e..0000000 --- a/target/linux/ar71xx/patches-3.10/603-MIPS-ath79-ap121-fixes.patch +++ /dev/null @@ -1,163 +0,0 @@ ---- a/arch/mips/ath79/mach-ap121.c -+++ b/arch/mips/ath79/mach-ap121.c -@@ -1,19 +1,21 @@ - /* - * Atheros AP121 board support - * -- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - --#include "machtypes.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" -+#include "dev-m25p80.h" - #include "dev-spi.h" - #include "dev-usb.h" - #include "dev-wmac.h" -+#include "machtypes.h" - - #define AP121_GPIO_LED_WLAN 0 - #define AP121_GPIO_LED_USB 1 -@@ -24,7 +26,14 @@ - #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ - #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) - --#define AP121_CAL_DATA_ADDR 0x1fff1000 -+#define AP121_MAC0_OFFSET 0x0000 -+#define AP121_MAC1_OFFSET 0x0006 -+#define AP121_CALDATA_OFFSET 0x1000 -+#define AP121_WMAC_MAC_OFFSET 0x1002 -+ -+#define AP121_MINI_GPIO_LED_WLAN 0 -+#define AP121_MINI_GPIO_BTN_JUMPSTART 12 -+#define AP121_MINI_GPIO_BTN_RESET 11 - - static struct gpio_led ap121_leds_gpio[] __initdata = { - { -@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi - } - }; - --static struct ath79_spi_controller_data ap121_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, -+static struct gpio_led ap121_mini_leds_gpio[] __initdata = { -+ { -+ .name = "ap121:green:wlan", -+ .gpio = AP121_MINI_GPIO_LED_WLAN, -+ .active_low = 0, -+ }, - }; - --static struct spi_board_info ap121_spi_info[] = { -+static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { - { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l1606e", -- .controller_data = &ap121_spi0_data, -+ .desc = "jumpstart button", -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, -+ .active_low = 1, -+ }, -+ { -+ .desc = "reset button", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = AP121_MINI_GPIO_BTN_RESET, -+ .active_low = 1, - } - }; - --static struct ath79_spi_platform_data ap121_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -+static void __init ap121_common_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_wmac(art + AP121_CALDATA_OFFSET, -+ art + AP121_WMAC_MAC_OFFSET); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); -+ -+ ath79_register_mdio(0, 0x0); -+ -+ /* LAN ports */ -+ ath79_register_eth(1); -+ -+ /* WAN port */ -+ ath79_register_eth(0); -+} - - static void __init ap121_setup(void) - { -- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); -+ ap121_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), - ap121_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap121_gpio_keys), - ap121_gpio_keys); -- -- ath79_register_spi(&ap121_spi_data, ap121_spi_info, -- ARRAY_SIZE(ap121_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(cal_data, NULL); - } - - MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", - ap121_setup); -+ -+static void __init ap121_mini_setup(void) -+{ -+ ap121_common_setup(); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), -+ ap121_mini_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ap121_mini_gpio_keys), -+ ap121_mini_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", -+ ap121_mini_setup); ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi - config ATH79_MACH_AP121 - bool "Atheros AP121 reference board" - select SOC_AR933X -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -17,6 +17,7 @@ - enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ -+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ diff --git a/target/linux/ar71xx/patches-3.10/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.10/604-MIPS-ath79-ap81-fixes.patch deleted file mode 100644 index bbfdd49..0000000 --- a/target/linux/ar71xx/patches-3.10/604-MIPS-ath79-ap81-fixes.patch +++ /dev/null @@ -1,128 +0,0 @@ ---- a/arch/mips/ath79/mach-ap81.c -+++ b/arch/mips/ath79/mach-ap81.c -@@ -9,12 +9,16 @@ - * by the Free Software Foundation. - */ - --#include "machtypes.h" --#include "dev-wmac.h" -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+ -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" - #include "dev-usb.h" -+#include "dev-wmac.h" -+#include "machtypes.h" - - #define AP81_GPIO_LED_STATUS 1 - #define AP81_GPIO_LED_AOSS 3 -@@ -29,6 +33,37 @@ - - #define AP81_CAL_DATA_ADDR 0x1fff1000 - -+static struct mtd_partition ap81_partitions[] = { -+ { -+ .name = "u-boot", -+ .offset = 0, -+ .size = 0x040000, -+ .mask_flags = MTD_WRITEABLE, -+ }, { -+ .name = "u-boot-env", -+ .offset = 0x040000, -+ .size = 0x010000, -+ }, { -+ .name = "rootfs", -+ .offset = 0x050000, -+ .size = 0x500000, -+ }, { -+ .name = "uImage", -+ .offset = 0x550000, -+ .size = 0x100000, -+ }, { -+ .name = "ART", -+ .offset = 0x650000, -+ .size = 0x1b0000, -+ .mask_flags = MTD_WRITEABLE, -+ } -+}; -+ -+static struct flash_platform_data ap81_flash_data = { -+ .parts = ap81_partitions, -+ .nr_parts = ARRAY_SIZE(ap81_partitions), -+}; -+ - static struct gpio_led ap81_leds_gpio[] __initdata = { - { - .name = "ap81:green:status", -@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio - } - }; - --static struct ath79_spi_controller_data ap81_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, --}; -- --static struct spi_board_info ap81_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "m25p64", -- .controller_data = &ap81_spi0_data, -- } --}; -- --static struct ath79_spi_platform_data ap81_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- - static void __init ap81_setup(void) - { - u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR); -@@ -96,10 +111,24 @@ static void __init ap81_setup(void) - ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap81_gpio_keys), - ap81_gpio_keys); -- ath79_register_spi(&ap81_spi_data, ap81_spi_info, -- ARRAY_SIZE(ap81_spi_info)); -+ ath79_register_m25p80(&ap81_flash_data); - ath79_register_wmac(cal_data, NULL); - ath79_register_usb(); -+ -+ ath79_register_mdio(0, 0x0); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0); -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ath79_eth0_data.speed = SPEED_100; -+ ath79_eth0_data.duplex = DUPLEX_FULL; -+ ath79_eth0_data.has_ar8216 = 1; -+ -+ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ath79_eth1_data.phy_mask = 0x10; -+ -+ ath79_register_eth(0); -+ ath79_register_eth(1); - } - - MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -30,9 +30,10 @@ config ATH79_MACH_AP136 - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" - select SOC_AR913X -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help diff --git a/target/linux/ar71xx/patches-3.10/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.10/605-MIPS-ath79-db120-fixes.patch deleted file mode 100644 index 44f2b03..0000000 --- a/target/linux/ar71xx/patches-3.10/605-MIPS-ath79-db120-fixes.patch +++ /dev/null @@ -1,209 +0,0 @@ ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -2,7 +2,7 @@ - * Atheros DB120 reference board support - * - * Copyright (c) 2011 Qualcomm Atheros -- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above -@@ -19,16 +19,26 @@ - */ - - #include <linux/pci.h> -+#include <linux/phy.h> -+#include <linux/platform_device.h> - #include <linux/ath9k_platform.h> -+#include <linux/ar8216_platform.h> - --#include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+ -+#include "common.h" -+#include "dev-ap9x-pci.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" -+#include "dev-m25p80.h" -+#include "dev-nfc.h" - #include "dev-spi.h" - #include "dev-usb.h" - #include "dev-wmac.h" --#include "pci.h" -+#include "machtypes.h" - -+#define DB120_GPIO_LED_USB 11 - #define DB120_GPIO_LED_WLAN_5G 12 - #define DB120_GPIO_LED_WLAN_2G 13 - #define DB120_GPIO_LED_STATUS 14 -@@ -39,8 +49,10 @@ - #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ - #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) - --#define DB120_WMAC_CALDATA_OFFSET 0x1000 --#define DB120_PCIE_CALDATA_OFFSET 0x5000 -+#define DB120_MAC0_OFFSET 0 -+#define DB120_MAC1_OFFSET 6 -+#define DB120_WMAC_CALDATA_OFFSET 0x1000 -+#define DB120_PCIE_CALDATA_OFFSET 0x5000 - - static struct gpio_led db120_leds_gpio[] __initdata = { - { -@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[] - .gpio = DB120_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -+ { -+ .name = "db120:green:usb", -+ .gpio = DB120_GPIO_LED_USB, -+ .active_low = 1, -+ } - }; - - static struct gpio_keys_button db120_gpio_keys[] __initdata = { -@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi - }, - }; - --static struct ath79_spi_controller_data db120_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, -+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = { -+ .mode = AR8327_PAD_MAC_RGMII, -+ .txclk_delay_en = true, -+ .rxclk_delay_en = true, -+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, -+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - }; - --static struct spi_board_info db120_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "s25sl064a", -- .controller_data = &db120_spi0_data, -- } -+static struct ar8327_led_cfg db120_ar8327_led_cfg = { -+ .led_ctrl0 = 0x00000000, -+ .led_ctrl1 = 0xc737c737, -+ .led_ctrl2 = 0x00000000, -+ .led_ctrl3 = 0x00c30c00, -+ .open_drain = true, - }; - --static struct ath79_spi_platform_data db120_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, -+static struct ar8327_platform_data db120_ar8327_data = { -+ .pad0_cfg = &db120_ar8327_pad0_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+ .led_cfg = &db120_ar8327_led_cfg, - }; - --#ifdef CONFIG_PCI --static struct ath9k_platform_data db120_ath9k_data; -- --static int db120_pci_plat_dev_init(struct pci_dev *dev) --{ -- switch (PCI_SLOT(dev->devfn)) { -- case 0: -- dev->dev.platform_data = &db120_ath9k_data; -- break; -- } -- -- return 0; --} -- --static void __init db120_pci_init(u8 *eeprom) --{ -- memcpy(db120_ath9k_data.eeprom_data, eeprom, -- sizeof(db120_ath9k_data.eeprom_data)); -- -- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); -- ath79_register_pci(); --} --#else --static inline void db120_pci_init(void) {} --#endif /* CONFIG_PCI */ -+static struct mdio_board_info db120_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &db120_ar8327_data, -+ }, -+}; - - static void __init db120_setup(void) - { - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); -+ ath79_register_m25p80(NULL); -+ - ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), - db120_leds_gpio); - ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, - ARRAY_SIZE(db120_gpio_keys), - db120_gpio_keys); -- ath79_register_spi(&db120_spi_data, db120_spi_info, -- ARRAY_SIZE(db120_spi_info)); - ath79_register_usb(); - ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); -- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); -+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | -+ AR934X_ETH_CFG_SW_ONLY_MODE); -+ -+ ath79_register_mdio(1, 0x0); -+ ath79_register_mdio(0, 0x0); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); -+ -+ mdiobus_register_board_info(db120_mdio0_info, -+ ARRAY_SIZE(db120_mdio0_info)); -+ -+ /* GMAC0 is connected to an AR8327 switch */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ ath79_eth0_pll_data.pll_1000 = 0x06000000; -+ ath79_register_eth(0); -+ -+ /* GMAC1 is connected to the internal switch */ -+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ -+ ath79_register_eth(1); -+ -+ ath79_register_nfc(); - } - - MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -43,9 +43,12 @@ config ATH79_MACH_AP81 - config ATH79_MACH_DB120 - bool "Atheros DB120 reference board" - select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help diff --git a/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch deleted file mode 100644 index b38b461..0000000 --- a/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch +++ /dev/null @@ -1,153 +0,0 @@ ---- a/arch/mips/ath79/mach-pb44.c -+++ b/arch/mips/ath79/mach-pb44.c -@@ -8,23 +8,48 @@ - * by the Free Software Foundation. - */ - -+#include <linux/delay.h> - #include <linux/init.h> - #include <linux/platform_device.h> - #include <linux/i2c.h> - #include <linux/i2c-gpio.h> - #include <linux/i2c/pcf857x.h> -+#include <linux/i2c/pcf857x.h> -+#include <linux/spi/flash.h> -+#include <linux/spi/vsc7385.h> - --#include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+#include <asm/mach-ath79/ath79.h> -+ -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" - #include "dev-spi.h" - #include "dev-usb.h" -+#include "machtypes.h" - #include "pci.h" - - #define PB44_GPIO_I2C_SCL 0 - #define PB44_GPIO_I2C_SDA 1 - -+#define PB44_PCF8757_VSC7395_CS 0 -+#define PB44_PCF8757_STEREO_CS 1 -+#define PB44_PCF8757_SLIC_CS0 2 -+#define PB44_PCF8757_SLIC_TEST 3 -+#define PB44_PCF8757_SLIC_INT0 4 -+#define PB44_PCF8757_SLIC_INT1 5 -+#define PB44_PCF8757_SW_RESET 6 -+#define PB44_PCF8757_SW_JUMP 8 -+#define PB44_PCF8757_LED_JUMP1 9 -+#define PB44_PCF8757_LED_JUMP2 10 -+#define PB44_PCF8757_TP24 11 -+#define PB44_PCF8757_TP25 12 -+#define PB44_PCF8757_TP26 13 -+#define PB44_PCF8757_TP27 14 -+#define PB44_PCF8757_TP28 15 -+ - #define PB44_GPIO_EXP_BASE 16 -+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) - #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) - #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) - #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) -@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data - .cs_line = 0, - }; - -+static struct ath79_spi_controller_data pb44_spi1_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_GPIO, -+ .cs_line = PB44_GPIO_VSC7395_CS, -+}; -+ -+static void pb44_vsc7395_reset(void) -+{ -+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY); -+ udelay(10); -+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); -+ mdelay(50); -+} -+ -+static struct vsc7385_platform_data pb44_vsc7395_data = { -+ .reset = pb44_vsc7395_reset, -+ .ucode_name = "vsc7395_ucode_pb44.bin", -+ .mac_cfg = { -+ .tx_ipg = 6, -+ .bit2 = 1, -+ .clk_sel = 0, -+ }, -+}; -+ -+static const char *pb44_part_probes[] = { -+ "RedBoot", -+ NULL, -+}; -+ -+static struct flash_platform_data pb44_flash_data = { -+ .part_probes = pb44_part_probes, -+}; -+ - static struct spi_board_info pb44_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", -+ .platform_data = &pb44_flash_data, - .controller_data = &pb44_spi0_data, - }, -+ { -+ .bus_num = 0, -+ .chip_select = 1, -+ .max_speed_hz = 25000000, -+ .modalias = "spi-vsc7385", -+ .platform_data = &pb44_vsc7395_data, -+ .controller_data = &pb44_spi1_data, -+ } - }; - - static struct ath79_spi_platform_data pb44_spi_data = { - .bus_num = 0, -- .num_chipselect = 1, -+ .num_chipselect = 2, - }; - -+#define PB44_WAN_PHYMASK BIT(0) -+#define PB44_LAN_PHYMASK 0 -+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) -+ - static void __init pb44_init(void) - { - i2c_register_board_info(0, pb44_i2c_board_info, -@@ -122,6 +192,22 @@ static void __init pb44_init(void) - ARRAY_SIZE(pb44_spi_info)); - ath79_register_usb(); - ath79_register_pci(); -+ -+ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK; -+ -+ ath79_register_eth(0); -+ -+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ ath79_eth1_pll_data.pll_1000 = 0x110000; -+ -+ ath79_register_eth(1); - } - - MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -58,6 +58,7 @@ config ATH79_MACH_DB120 - config ATH79_MACH_PB44 - bool "Atheros PB44 reference board" - select SOC_AR71XX -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI diff --git a/target/linux/ar71xx/patches-3.10/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.10/607-MIPS-ath79-ubnt-xm-fixes.patch deleted file mode 100644 index cbbe20b..0000000 --- a/target/linux/ar71xx/patches-3.10/607-MIPS-ath79-ubnt-xm-fixes.patch +++ /dev/null @@ -1,109 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -70,9 +70,10 @@ config ATH79_MACH_PB44 - config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM (rev 1.0) board" - select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - help - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -16,10 +16,11 @@ - - #include <asm/mach-ath79/irq.h> - --#include "machtypes.h" -+#include "dev-ap9x-pci.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" -+#include "machtypes.h" - #include "pci.h" - - #define UBNT_XM_GPIO_LED_L1 0 -@@ -32,7 +33,7 @@ - #define UBNT_XM_KEYS_POLL_INTERVAL 20 - #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) - --#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) -+#define UBNT_XM_EEPROM_ADDR 0x1fff1000 - - static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { - { -@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g - } - }; - --static struct ath79_spi_controller_data ubnt_xm_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, --}; -- --static struct spi_board_info ubnt_xm_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- .controller_data = &ubnt_xm_spi0_data, -- } --}; -- --static struct ath79_spi_platform_data ubnt_xm_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- --#ifdef CONFIG_PCI --static struct ath9k_platform_data ubnt_xm_eeprom_data; -- --static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) --{ -- switch (PCI_SLOT(dev->devfn)) { -- case 0: -- dev->dev.platform_data = &ubnt_xm_eeprom_data; -- break; -- } -- -- return 0; --} -- --static void __init ubnt_xm_pci_init(void) --{ -- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, -- sizeof(ubnt_xm_eeprom_data.eeprom_data)); -- -- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); -- ath79_register_pci(); --} --#else --static inline void ubnt_xm_pci_init(void) {} --#endif /* CONFIG_PCI */ -- - static void __init ubnt_xm_init(void) - { -+ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); -+ - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), - ubnt_xm_leds_gpio); - -@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void) - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - -- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, -- ARRAY_SIZE(ubnt_xm_spi_info)); -- -- ubnt_xm_pci_init(); -+ ath79_register_m25p80(NULL); -+ ap91_pci_init(eeprom, NULL); - } - - MIPS_MACHINE(ATH79_MACH_UBNT_XM, diff --git a/target/linux/ar71xx/patches-3.10/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.10/608-MIPS-ath79-ubnt-xm-add-more-boards.patch deleted file mode 100644 index d8d48f5..0000000 --- a/target/linux/ar71xx/patches-3.10/608-MIPS-ath79-ubnt-xm-add-more-boards.patch +++ /dev/null @@ -1,347 +0,0 @@ ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -12,16 +12,22 @@ - - #include <linux/init.h> - #include <linux/pci.h> -+#include <linux/platform_device.h> - #include <linux/ath9k_platform.h> -+#include <linux/etherdevice.h> -+#include <linux/ar8216_platform.h> - - #include <asm/mach-ath79/irq.h> -+#include <asm/mach-ath79/ar71xx_regs.h> - - #include "dev-ap9x-pci.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" - #include "dev-m25p80.h" -+#include "dev-usb.h" -+#include "dev-wmac.h" - #include "machtypes.h" --#include "pci.h" - - #define UBNT_XM_GPIO_LED_L1 0 - #define UBNT_XM_GPIO_LED_L2 1 -@@ -37,19 +43,19 @@ - - static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { - { -- .name = "ubnt-xm:red:link1", -+ .name = "ubnt:red:link1", - .gpio = UBNT_XM_GPIO_LED_L1, - .active_low = 0, - }, { -- .name = "ubnt-xm:orange:link2", -+ .name = "ubnt:orange:link2", - .gpio = UBNT_XM_GPIO_LED_L2, - .active_low = 0, - }, { -- .name = "ubnt-xm:green:link3", -+ .name = "ubnt:green:link3", - .gpio = UBNT_XM_GPIO_LED_L3, - .active_low = 0, - }, { -- .name = "ubnt-xm:green:link4", -+ .name = "ubnt:green:link4", - .gpio = UBNT_XM_GPIO_LED_L4, - .active_low = 0, - }, -@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g - } - }; - -+#define UBNT_M_WAN_PHYMASK BIT(4) -+ - static void __init ubnt_xm_init(void) - { - u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), - ubnt_xm_leds_gpio); -@@ -79,9 +89,246 @@ static void __init ubnt_xm_init(void) - - ath79_register_m25p80(NULL); - ap91_pci_init(eeprom, NULL); -+ -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); -+ ath79_register_eth(0); - } - - MIPS_MACHINE(ATH79_MACH_UBNT_XM, - "UBNT-XM", - "Ubiquiti Networks XM (rev 1.0) board", - ubnt_xm_init); -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", -+ ubnt_xm_init); -+ -+static void __init ubnt_rocket_m_setup(void) -+{ -+ ubnt_xm_init(); -+ ath79_register_usb(); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", -+ ubnt_rocket_m_setup); -+ -+static void __init ubnt_nano_m_setup(void) -+{ -+ ubnt_xm_init(); -+ ath79_register_eth(1); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", -+ ubnt_nano_m_setup); -+ -+static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:green:globe", -+ .gpio = 0, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:power", -+ .gpio = 11, -+ .active_low = 1, -+ .default_state = LEDS_GPIO_DEFSTATE_ON, -+ } -+}; -+ -+static void __init ubnt_airrouter_setup(void) -+{ -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1); -+ -+ ath79_register_eth(1); -+ ath79_register_eth(0); -+ ath79_register_usb(); -+ -+ ap91_pci_init(ee, NULL); -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), -+ ubnt_airrouter_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", -+ ubnt_airrouter_setup); -+ -+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:orange:dome", -+ .gpio = 1, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:dome", -+ .gpio = 0, -+ .active_low = 0, -+ } -+}; -+ -+static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:orange:front", -+ .gpio = 1, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:front", -+ .gpio = 0, -+ .active_low = 0, -+ } -+}; -+ -+static void __init ubnt_unifi_setup(void) -+{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); -+ ath79_register_eth(0); -+ -+ ap91_pci_init(ee, NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), -+ ubnt_unifi_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", -+ ubnt_unifi_setup); -+ -+ -+#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4) -+#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) -+ -+static void __init ubnt_unifi_outdoor_setup(void) -+{ -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | -+ UBNT_UNIFIOD_2ND_PHYMASK)); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); -+ ath79_register_eth(0); -+ ath79_register_eth(1); -+ -+ ap91_pci_init(ee, NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio), -+ ubnt_unifi_outdoor_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20", -+ "Ubiquiti UniFiAP Outdoor", -+ ubnt_unifi_outdoor_setup); -+ -+static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { -+ { -+ .name = "ubnt:white:dome", -+ .gpio = 12, -+ }, { -+ .name = "ubnt:blue:dome", -+ .gpio = 13, -+ } -+}; -+ -+static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = { -+ { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = 17, -+ .active_low = 1, -+ } -+}; -+ -+static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = { -+ .mode = AR8327_PAD_MAC_RGMII, -+ .txclk_delay_en = true, -+ .rxclk_delay_en = true, -+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, -+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -+}; -+ -+static struct ar8327_platform_data uap_pro_ar8327_data = { -+ .pad0_cfg = &uap_pro_ar8327_pad0_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+}; -+ -+static struct mdio_board_info uap_pro_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &uap_pro_ar8327_data, -+ }, -+}; -+ -+#define UAP_PRO_MAC0_OFFSET 0x0000 -+#define UAP_PRO_MAC1_OFFSET 0x0006 -+#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000 -+#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000 -+ -+static void __init ubnt_uap_pro_setup(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds), -+ ubnt_uap_pro_gpio_leds); -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(uap_pro_gpio_keys), -+ uap_pro_gpio_keys); -+ -+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); -+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); -+ -+ ath79_register_mdio(0, 0x0); -+ mdiobus_register_board_info(uap_pro_mdio0_info, -+ ARRAY_SIZE(uap_pro_mdio0_info)); -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); -+ ath79_init_mac(ath79_eth0_data.mac_addr, -+ eeprom + UAP_PRO_MAC0_OFFSET, 0); -+ -+ /* GMAC0 is connected to an AR8327 switch */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ ath79_eth0_pll_data.pll_1000 = 0x06000000; -+ ath79_register_eth(0); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", -+ ubnt_uap_pro_setup); -+ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -68,12 +68,16 @@ config ATH79_MACH_PB44 - Atheros PB44 reference board. - - config ATH79_MACH_UBNT_XM -- bool "Ubiquiti Networks XM (rev 1.0) board" -+ bool "Ubiquiti Networks XM/UniFi boards" - select SOC_AR724X -+ select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -22,6 +22,13 @@ enum ath79_mach_type { - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ -+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ -+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ -+ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ -+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ -+ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ - ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ - }; - diff --git a/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch deleted file mode 100644 index 4309712..0000000 --- a/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch +++ /dev/null @@ -1,317 +0,0 @@ ---- a/arch/mips/ath79/mach-ap136.c -+++ b/arch/mips/ath79/mach-ap136.c -@@ -18,23 +18,29 @@ - * - */ - --#include <linux/pci.h> --#include <linux/ath9k_platform.h> -+#include <linux/platform_device.h> -+#include <linux/ar8216_platform.h> - --#include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+ -+#include "common.h" -+#include "pci.h" -+#include "dev-ap9x-pci.h" - #include "dev-gpio-buttons.h" -+#include "dev-eth.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" -+#include "dev-nfc.h" - #include "dev-usb.h" - #include "dev-wmac.h" --#include "pci.h" -+#include "machtypes.h" - --#define AP136_GPIO_LED_STATUS_RED 14 --#define AP136_GPIO_LED_STATUS_GREEN 19 - #define AP136_GPIO_LED_USB 4 --#define AP136_GPIO_LED_WLAN_2G 13 - #define AP136_GPIO_LED_WLAN_5G 12 -+#define AP136_GPIO_LED_WLAN_2G 13 -+#define AP136_GPIO_LED_STATUS_RED 14 - #define AP136_GPIO_LED_WPS_RED 15 -+#define AP136_GPIO_LED_STATUS_GREEN 19 - #define AP136_GPIO_LED_WPS_GREEN 20 - - #define AP136_GPIO_BTN_WPS 16 -@@ -43,37 +49,39 @@ - #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ - #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) - --#define AP136_WMAC_CALDATA_OFFSET 0x1000 --#define AP136_PCIE_CALDATA_OFFSET 0x5000 -+#define AP136_MAC0_OFFSET 0 -+#define AP136_MAC1_OFFSET 6 -+#define AP136_WMAC_CALDATA_OFFSET 0x1000 -+#define AP136_PCIE_CALDATA_OFFSET 0x5000 - - static struct gpio_led ap136_leds_gpio[] __initdata = { - { -- .name = "qca:green:status", -+ .name = "ap136:green:status", - .gpio = AP136_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, - { -- .name = "qca:red:status", -+ .name = "ap136:red:status", - .gpio = AP136_GPIO_LED_STATUS_RED, - .active_low = 1, - }, - { -- .name = "qca:green:wps", -+ .name = "ap136:green:wps", - .gpio = AP136_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, - { -- .name = "qca:red:wps", -+ .name = "ap136:red:wps", - .gpio = AP136_GPIO_LED_WPS_RED, - .active_low = 1, - }, - { -- .name = "qca:red:wlan-2g", -+ .name = "ap136:red:wlan-2g", - .gpio = AP136_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { -- .name = "qca:red:usb", -+ .name = "ap136:red:usb", - .gpio = AP136_GPIO_LED_USB, - .active_low = 1, - } -@@ -98,65 +106,152 @@ static struct gpio_keys_button ap136_gpi - }, - }; - --static struct ath79_spi_controller_data ap136_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, -+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg; -+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg; -+ -+static struct ar8327_platform_data ap136_ar8327_data = { -+ .pad0_cfg = &ap136_ar8327_pad0_cfg, -+ .pad6_cfg = &ap136_ar8327_pad6_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+ .port6_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, - }; - --static struct spi_board_info ap136_spi_info[] = { -+static struct mdio_board_info ap136_mdio0_info[] = { - { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- .controller_data = &ap136_spi0_data, -- } -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &ap136_ar8327_data, -+ }, - }; - --static struct ath79_spi_platform_data ap136_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -+static void __init ap136_common_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), -+ ap136_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ap136_gpio_keys), -+ ap136_gpio_keys); -+ -+ ath79_register_usb(); -+ ath79_register_nfc(); -+ -+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL); -+ -+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - --#ifdef CONFIG_PCI --static struct ath9k_platform_data ap136_ath9k_data; -+ ath79_register_mdio(0, 0x0); - --static int ap136_pci_plat_dev_init(struct pci_dev *dev) -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0); -+ -+ mdiobus_register_board_info(ap136_mdio0_info, -+ ARRAY_SIZE(ap136_mdio0_info)); -+ -+ /* GMAC0 is connected to the RMGII interface */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ -+ ath79_register_eth(0); -+ -+ /* GMAC1 is connected tot eh SGMII interface */ -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ -+ ath79_register_eth(1); -+} -+ -+static void __init ap136_010_setup(void) - { -- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) -- dev->dev.platform_data = &ap136_ath9k_data; -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -- return 0; -+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */ -+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; -+ ap136_ar8327_pad0_cfg.txclk_delay_en = true; -+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; -+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; -+ -+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */ -+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; -+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; -+ -+ ath79_eth0_pll_data.pll_1000 = 0xa6000000; -+ ath79_eth1_pll_data.pll_1000 = 0x03000101; -+ -+ ap136_common_setup(); -+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); - } - --static void __init ap136_pci_init(u8 *eeprom) -+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -+ "Atheros AP136-010 reference board", -+ ap136_010_setup); -+ -+static void __init ap136_020_common_setup(void) - { -- memcpy(ap136_ath9k_data.eeprom_data, eeprom, -- sizeof(ap136_ath9k_data.eeprom_data)); -+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ -+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; -+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true; -+ -+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ -+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII; -+ ap136_ar8327_pad6_cfg.txclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; -+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; - -- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); -- ath79_register_pci(); -+ ath79_eth0_pll_data.pll_1000 = 0x56000000; -+ ath79_eth1_pll_data.pll_1000 = 0x03000101; -+ -+ ap136_common_setup(); - } --#else --static inline void ap136_pci_init(void) {} --#endif /* CONFIG_PCI */ - --static void __init ap136_setup(void) -+static void __init ap136_020_setup(void) - { - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), -- ap136_leds_gpio); -- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, -- ARRAY_SIZE(ap136_gpio_keys), -- ap136_gpio_keys); -- ath79_register_spi(&ap136_spi_data, ap136_spi_info, -- ARRAY_SIZE(ap136_spi_info)); -- ath79_register_usb(); -- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); -- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); -+ ap136_020_common_setup(); -+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); - } - --MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -- "Atheros AP136-010 reference board", -- ap136_setup); -+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020", -+ "Atheros AP136-020 reference board", -+ ap136_020_setup); -+ -+/* -+ * AP135-020 is similar to AP136-020, any future AP135 specific init -+ * code can be added here. -+ */ -+static void __init ap135_020_setup(void) -+{ -+ ap136_leds_gpio[0].name = "ap135:green:status"; -+ ap136_leds_gpio[1].name = "ap135:red:status"; -+ ap136_leds_gpio[2].name = "ap135:green:wps"; -+ ap136_leds_gpio[3].name = "ap135:red:wps"; -+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g"; -+ ap136_leds_gpio[5].name = "ap135:red:usb"; -+ -+ ap136_020_common_setup(); -+ ath79_register_pci(); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020", -+ "Atheros AP135-020 reference board", -+ ap135_020_setup); ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -18,7 +18,9 @@ enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ -+ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ -+ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -16,16 +16,17 @@ config ATH79_MACH_AP121 - Atheros AP121 reference board. - - config ATH79_MACH_AP136 -- bool "Atheros AP136 reference board" -+ bool "Atheros AP136/AP135 reference board" - select SOC_QCA955X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the -- Atheros AP136 reference board. -+ Atheros AP136 or AP135 reference boards. - - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" diff --git a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch deleted file mode 100644 index 60df54c..0000000 --- a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch +++ /dev/null @@ -1,1168 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,144 @@ - - enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, -+ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */ -+ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ -+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */ -+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */ -+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ -+ ATH79_MACH_AP113, /* Atheros AP113 reference board */ - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ -+ ATH79_MACH_AP132, /* Atheros AP132 reference board */ - ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ -+ ATH79_MACH_AP83, /* Atheros AP83 */ -+ ATH79_MACH_AP96, /* Atheros AP96 */ -+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ -+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ -+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ -+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ -+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ -+ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ -+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ -+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ -+ ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */ -+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ -+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ -+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ -+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ -+ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ -+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ -+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ -+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ -+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */ -+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ -+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ -+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ -+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ -+ ATH79_MACH_MR600, /* OpenMesh MR600 */ -+ ATH79_MACH_MYNET_N600, /* WD My Net N600 */ -+ ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ -+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ -+ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ -+ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ -+ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ -+ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ -+ ATH79_MACH_OM2P, /* OpenMesh OM2P */ -+ ATH79_MACH_PB42, /* Atheros PB42 */ -+ ATH79_MACH_PB92, /* Atheros PB92 */ -+ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ -+ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ -+ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ -+ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ -+ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */ -+ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ -+ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ -+ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ -+ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ -+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ -+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ -+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ -+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */ -+ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ -+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ -+ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ -+ ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ -+ ATH79_MACH_RW2458N, /* Redwave RW2458N */ -+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ -+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ -+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ -+ ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */ -+ ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */ -+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ -+ ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */ -+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ -+ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */ -+ ATH79_MACH_TL_MR3040_V2, /* TP-LINK TL-MR3040 v2 */ -+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ -+ ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */ -+ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ -+ ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */ -+ ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ -+ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ -+ ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ -+ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ -+ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ -+ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ -+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ -+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ -+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ -+ ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ -+ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ -+ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ -+ ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */ -+ ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3 */ -+ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ -+ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ -+ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ -+ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ -+ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ -+ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ -+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ - ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ - ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ -+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ - ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ - ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ -+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ -+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ - ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ - ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ - ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ - ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ -+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */ -+ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ -+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ -+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */ -+ ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */ -+ ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */ -+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ -+ ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */ -+ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */ -+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ -+ ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */ -+ ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ -+ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ -+ ATH79_MACH_WP543, /* Compex WP543 */ -+ ATH79_MACH_WPE72, /* Compex WPE72 */ -+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ -+ ATH79_MACH_WRT400N, /* Linksys WRT400N */ -+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ -+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ -+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ -+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ -+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ -+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ - }; - - #endif /* _ATH79_MACHTYPE_H */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -2,6 +2,61 @@ if ATH79 - - menu "Atheros AR71XX/AR724X/AR913X machine selection" - -+config ATH79_MACH_ALFA_AP96 -+ bool "ALFA Network AP96 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_HORNET_UB -+ bool "ALFA Network Hornet-UB board support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_ALFA_NX -+ bool "ALFA Network N2/N5 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ALL0258N -+ bool "Allnet ALL0258N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ALL0315N -+ bool "Allnet ALL0315N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_AP113 -+ bool "Atheros AP113 board support" -+ select SOC_AR724X -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_PB9X_PCI if PCI -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_ETH -+ - config ATH79_MACH_AP121 - bool "Atheros AP121 reference board" - select SOC_AR933X -@@ -11,62 +66,734 @@ config ATH79_MACH_AP121 - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP121 reference board. -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP121 reference board. -+ -+config ATH79_MACH_AP132 -+ bool "Atheros AP132 reference board" -+ select SOC_QCA955X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP132 reference boards. -+ -+config ATH79_MACH_AP136 -+ bool "Atheros AP136/AP135 reference board" -+ select SOC_QCA955X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP136 or AP135 reference boards. -+ -+config ATH79_MACH_AP81 -+ bool "Atheros AP81 reference board" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP81 reference board. -+ -+config ATH79_MACH_AP83 -+ bool "Atheros AP83 board support" -+ select SOC_AR913X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_AP96 -+ bool "Atheros AP96 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DB120 -+ bool "Atheros DB120 reference board" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros DB120 reference board. -+ -+config ATH79_MACH_PB42 -+ bool "Atheros PB42 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_PB44 -+ bool "Atheros PB44 reference board" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_SPI -+ select ATH79_DEV_USB -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros PB44 reference board. -+ -+config ATH79_MACH_PB92 -+ bool "Atheros PB92 board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_PB9X_PCI if PCI -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_AW_NR580 -+ bool "AzureWave AW-NR580 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WHR_HP_G300N -+ bool "Buffalo WHR-HP-G300N board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WLAE_AG300N -+ bool "Buffalo WLAE-AG300N board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WLR8100 -+ bool "Sitecom WLR-8100 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WZR_HP_AG300H -+ bool "Buffalo WZR-HP-AG300H board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WZR_HP_G300NH -+ bool "Buffalo WZR-HP-G300NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select RTL8366_SMI -+ -+config ATH79_MACH_WZR_HP_G300NH2 -+ bool "Buffalo WZR-HP-G300NH2 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WZR_HP_G450H -+ bool "Buffalo WZR-HP-G450H board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WP543 -+ bool "Compex WP543/WPJ543 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select MYLOADER -+ -+config ATH79_MACH_WPE72 -+ bool "Compex WPE72/WPE72NX board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select MYLOADER -+ -+config ATH79_MACH_DIR_505_A1 -+ bool "D-Link DIR-505-A1 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_600_A1 -+ bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_615_C1 -+ bool "D-Link DIR-615 rev. C1 support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_825_B1 -+ bool "D-Link DIR-825 rev. B1 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DIR_825_C1 -+ bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_DRAGINO2 -+ bool "DRAGINO V2 support" -+ select SOC_AR933X -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_ETH -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_EW_DORIN -+ bool "embedded wireless Dorin Platform support" -+ select SOC_AR933X -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_ETH -+ help -+ Say 'Y' here if you want your kernel to support the -+ Dorin Platform from www.80211.de . -+ -+config ATH79_MACH_JA76PF -+ bool "jjPlus JA76PF board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_JWAP003 -+ bool "jjPlus JWAP003 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WRT160NL -+ bool "Linksys WRT160NL board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_WRT400N -+ bool "Linksys WRT400N board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_RB4XX -+ bool "MikroTik RouterBOARD 4xx series support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_RB750 -+ bool "MikroTik RouterBOARD 750 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ select RLE_DECOMPRESS -+ -+config ATH79_MACH_RB95X -+ bool "MikroTik RouterBOARD 95X support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_NFC -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ select RLE_DECOMPRESS -+ -+config ATH79_MACH_RB2011 -+ bool "MikroTik RouterBOARD 2011 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_ROUTERBOOT -+ select RLE_DECOMPRESS -+ -+config ATH79_MACH_WNDAP360 -+ bool "NETGEAR WNDAP360 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WNDR3700 -+ bool "NETGEAR WNDR3700 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WNDR4300 -+ bool "NETGEAR WNDR3700v4/WNDR4300 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WNR2000 -+ bool "NETGEAR WNR2000 board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WNR2000_V3 -+ bool "NETGEAR WNR2000 V3/WNR612 v2 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+ config ATH79_MACH_WNR2200 -+ bool "NETGEAR WNR2200 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_OM2P -+ bool "OpenMesh OM2P board support" -+ select SOC_AR724X -+ select SOC_AR933X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MR600 -+ bool "OpenMesh MR600 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MZK_W04NU -+ bool "Planex MZK-W04NU board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MZK_W300NH -+ bool "Planex MZK-W300NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_RW2458N -+ bool "Redwave RW2458N board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_CAP4200AG -+ bool "Senao CAP4200AG support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EAP7660D -+ bool "Senao EAP7660D support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ARCHER_C7 -+ bool "TP-LINK Archer C7 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_MR11U -+ bool "TP-LINK TL-MR11U/TL-MR3040 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC - --config ATH79_MACH_AP136 -- bool "Atheros AP136/AP135 reference board" -- select SOC_QCA955X -+config ATH79_MACH_TL_MR13U -+ bool "TP-LINK TL-MR13U support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_NFC -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP136 or AP135 reference boards. - --config ATH79_MACH_AP81 -- bool "Atheros AP81 reference board" -+config ATH79_MACH_TL_MR3020 -+ bool "TP-LINK TL-MR3020 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_MR3X20 -+ bool "TP-LINK TL-MR3220/3420 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_TL_WAX50RE -+ bool "TP-LINK TL-WA750/850RE support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WA901ND -+ bool "TP-LINK TL-WA901ND/TL-WA7510N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WA901ND_V2 -+ bool "TP-LINK TL-WA901ND v2 support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WDR3500 -+ bool "TP-LINK TL-WDR3500 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP81 reference board. - --config ATH79_MACH_DB120 -- bool "Atheros DB120 reference board" -+config ATH79_MACH_TL_WDR4300 -+ bool "TP-LINK TL-WDR3600/4300/4310 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 -- select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros DB120 reference board. - --config ATH79_MACH_PB44 -- bool "Atheros PB44 reference board" -+config ATH79_MACH_TL_WR703N -+ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR720N_V3 -+ bool "TP-LINK TL-WR720N v3 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR741ND -+ bool "TP-LINK TL-WR741ND support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WR741ND_V4 -+ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR841N_V1 -+ bool "TP-LINK TL-WR841N v1 support" - select SOC_AR71XX -+ select ATH79_DEV_DSA - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WR841N_V8 -+ bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR941ND -+ bool "TP-LINK TL-WR941ND support" -+ select SOC_AR913X -+ select ATH79_DEV_DSA -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR1041N_V2 -+ bool "TP-LINK TL-WR1041N v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR1043ND -+ bool "TP-LINK TL-WR1043ND support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR1043ND_V2 -+ bool "TP-LINK TL-WR1043ND v2 support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR2543N -+ bool "TP-LINK TL-WR2543N/ND support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_TEW_632BRP -+ bool "TRENDnet TEW-632BRP support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_TEW_673GRU -+ bool "TRENDnet TEW-673GRU support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_NVRAM -+ -+config ATH79_MACH_TEW_712BR -+ bool "TRENDnet TEW-712BR support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_TEW_732BR -+ bool "TRENDnet TEW-732BR support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_UBNT -+ bool "Ubiquiti AR71xx based boards support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB -- help -- Say 'Y' here if you want your kernel to support the -- Atheros PB44 reference board. - - config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM/UniFi boards" -@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. - -+config ATH79_MACH_MYNET_N600 -+ bool "WD My Net N600 board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_MYNET_REXT -+ bool "WD My Net Wi-Fi Range Extender board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_ZCN_1523H -+ bool "Zcomax ZCN-1523H support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_NBG460N -+ bool "Zyxel NBG460N/550N/550NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_CARAMBOLA2 -+ bool "8devices Carambola2 board" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_BHU_BXU2000N2_A -+ bool "BHU BXU2000n-2 rev. A support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - endmenu - - config SOC_AR71XX -@@ -132,7 +918,10 @@ config ATH79_DEV_DSA - config ATH79_DEV_ETH - def_bool n - --config PCI_AR724X -+config ATH79_DEV_DSA -+ def_bool n -+ -+config ATH79_DEV_ETH - def_bool n - - config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +953,7 @@ config ATH79_PCI_ATH9K_FIXUP - config ATH79_ROUTERBOOT - def_bool n - -+config PCI_AR724X -+ def_bool n -+ - endif ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route - # - # Machines - # -+obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o -+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o -+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o -+obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o -+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o - obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o -+obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o - obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o - obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o -+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o -+obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o -+obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o -+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o -+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o -+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o - obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o -+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o -+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o -+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o -+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o -+obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o -+obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o -+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o -+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o -+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o -+obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o -+obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o -+obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o -+obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o -+obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o -+obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o -+obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o -+obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o -+obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o -+obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o - obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o -+obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o -+obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o -+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o -+obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o -+obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o -+obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o -+obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o -+obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o -+obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o -+obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o -+obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o -+obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o -+obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o -+obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o -+obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o -+obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o -+obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o -+obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o -+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o -+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o -+obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o - obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o -+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o -+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o -+obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o -+obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o -+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o -+obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o -+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o -+obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o -+obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o -+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o -+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o -+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o -+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o -+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o -+obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -180,6 +180,12 @@ void __init prom_init(void) - ath79_prom_append_cmdline("board", env); - } - } -+ -+ if (strstr(arcs_cmdline, "board=750Gr3") || -+ strstr(arcs_cmdline, "board=951G") || -+ strstr(arcs_cmdline, "board=2011L") || -+ strstr(arcs_cmdline, "board=711Gr100")) -+ ath79_prom_append_cmdline("console", "ttyS0,115200"); - } - - void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-3.10/611-MIPS-ath79-wdt-timeout.patch b/target/linux/ar71xx/patches-3.10/611-MIPS-ath79-wdt-timeout.patch deleted file mode 100644 index 0927d5a..0000000 --- a/target/linux/ar71xx/patches-3.10/611-MIPS-ath79-wdt-timeout.patch +++ /dev/null @@ -1,25 +0,0 @@ -MIPS: ath79: fix maximum timeout - -If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout. - -Signed-off-by: John Crispin <blogic@openwrt.org> - ---- a/drivers/watchdog/ath79_wdt.c -+++ b/drivers/watchdog/ath79_wdt.c -@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi - - static int ath79_wdt_set_timeout(int val) - { -- if (val < 1 || val > max_timeout) -+ if (val < 1) - return -EINVAL; - -- timeout = val; -+ if (val > max_timeout) -+ timeout = max_timeout; -+ else -+ timeout = val; -+ - ath79_wdt_keepalive(); - - return 0; diff --git a/target/linux/ar71xx/patches-3.10/612-MIPS-ath79-set-buffalo-txgain.patch b/target/linux/ar71xx/patches-3.10/612-MIPS-ath79-set-buffalo-txgain.patch deleted file mode 100644 index fdef854..0000000 --- a/target/linux/ar71xx/patches-3.10/612-MIPS-ath79-set-buffalo-txgain.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -306,6 +306,11 @@ void __init ath79_wmac_disable_5ghz(void - ath79_wmac_data.disable_5ghz = true; - } - -+void __init ath79_wmac_set_tx_gain_buffalo(void) -+{ -+ ath79_wmac_data.tx_gain_buffalo = true; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u - void ath79_register_wmac_simple(void); - void ath79_wmac_disable_2ghz(void); - void ath79_wmac_disable_5ghz(void); -+void ath79_wmac_set_tx_gain_buffalo(void); - - bool ar93xx_wmac_read_mac_address(u8 *dest); - diff --git a/target/linux/ar71xx/patches-3.10/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch b/target/linux/ar71xx/patches-3.10/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch deleted file mode 100644 index 83de7b1..0000000 --- a/target/linux/ar71xx/patches-3.10/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch +++ /dev/null @@ -1,76 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -18,9 +18,11 @@ - #include <linux/etherdevice.h> - #include <linux/platform_device.h> - #include <linux/ath9k_platform.h> -+#include <linux/gpio.h> - - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> -+#include "common.h" - #include "dev-wmac.h" - - static u8 ath79_wmac_mac[ETH_ALEN]; -@@ -311,6 +313,51 @@ void __init ath79_wmac_set_tx_gain_buffa - ath79_wmac_data.tx_gain_buffalo = true; - } - -+static int ath79_request_ext_lna_gpio(unsigned chain, int gpio) -+{ -+ char buf[32]; -+ char *label; -+ int err; -+ -+ scnprintf(buf, sizeof(buf), "external LNA%u", chain); -+ label = kstrdup(buf, GFP_KERNEL); -+ -+ err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label); -+ if (err) { -+ pr_err("unable to request GPIO%d for external LNA%u\n", -+ gpio, chain); -+ kfree(label); -+ } -+ -+ return err; -+} -+ -+static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio) -+{ -+ unsigned int sel; -+ int err; -+ -+ if (WARN_ON(chain > 1)) -+ return; -+ -+ err = ath79_request_ext_lna_gpio(chain, gpio); -+ if (err) -+ return; -+ -+ if (chain == 0) -+ sel = AR934X_GPIO_OUT_EXT_LNA0; -+ else -+ sel = AR934X_GPIO_OUT_EXT_LNA1; -+ -+ ath79_gpio_output_select(gpio, sel); -+} -+ -+void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio) -+{ -+ if (soc_is_ar934x()) -+ ar934x_set_ext_lna_gpio(chain, gpio); -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void); - void ath79_wmac_disable_2ghz(void); - void ath79_wmac_disable_5ghz(void); - void ath79_wmac_set_tx_gain_buffalo(void); -+void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio); - - bool ar93xx_wmac_read_mac_address(u8 *dest); - diff --git a/target/linux/ar71xx/patches-3.10/614-MIPS-ath79-ap81-remove-mtd-partitions.patch b/target/linux/ar71xx/patches-3.10/614-MIPS-ath79-ap81-remove-mtd-partitions.patch deleted file mode 100644 index 6d403ab..0000000 --- a/target/linux/ar71xx/patches-3.10/614-MIPS-ath79-ap81-remove-mtd-partitions.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/ath79/mach-ap81.c -+++ b/arch/mips/ath79/mach-ap81.c -@@ -33,37 +33,6 @@ - - #define AP81_CAL_DATA_ADDR 0x1fff1000 - --static struct mtd_partition ap81_partitions[] = { -- { -- .name = "u-boot", -- .offset = 0, -- .size = 0x040000, -- .mask_flags = MTD_WRITEABLE, -- }, { -- .name = "u-boot-env", -- .offset = 0x040000, -- .size = 0x010000, -- }, { -- .name = "rootfs", -- .offset = 0x050000, -- .size = 0x500000, -- }, { -- .name = "uImage", -- .offset = 0x550000, -- .size = 0x100000, -- }, { -- .name = "ART", -- .offset = 0x650000, -- .size = 0x1b0000, -- .mask_flags = MTD_WRITEABLE, -- } --}; -- --static struct flash_platform_data ap81_flash_data = { -- .parts = ap81_partitions, -- .nr_parts = ARRAY_SIZE(ap81_partitions), --}; -- - static struct gpio_led ap81_leds_gpio[] __initdata = { - { - .name = "ap81:green:status", -@@ -111,7 +80,7 @@ static void __init ap81_setup(void) - ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap81_gpio_keys), - ap81_gpio_keys); -- ath79_register_m25p80(&ap81_flash_data); -+ ath79_register_m25p80(NULL); - ath79_register_wmac(cal_data, NULL); - ath79_register_usb(); - diff --git a/target/linux/ar71xx/patches-3.10/615-MIPS-ath79-ap83-remove-mtd-partitions.patch b/target/linux/ar71xx/patches-3.10/615-MIPS-ath79-ap83-remove-mtd-partitions.patch deleted file mode 100644 index 60872ae..0000000 --- a/target/linux/ar71xx/patches-3.10/615-MIPS-ath79-ap83-remove-mtd-partitions.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/arch/mips/ath79/mach-ap83.c -+++ b/arch/mips/ath79/mach-ap83.c -@@ -42,41 +42,8 @@ - #define AP83_KEYS_POLL_INTERVAL 20 /* msecs */ - #define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL) - --static struct mtd_partition ap83_flash_partitions[] = { -- { -- .name = "u-boot", -- .offset = 0, -- .size = 0x040000, -- .mask_flags = MTD_WRITEABLE, -- }, { -- .name = "u-boot-env", -- .offset = 0x040000, -- .size = 0x020000, -- .mask_flags = MTD_WRITEABLE, -- }, { -- .name = "kernel", -- .offset = 0x060000, -- .size = 0x140000, -- }, { -- .name = "rootfs", -- .offset = 0x1a0000, -- .size = 0x650000, -- }, { -- .name = "art", -- .offset = 0x7f0000, -- .size = 0x010000, -- .mask_flags = MTD_WRITEABLE, -- }, { -- .name = "firmware", -- .offset = 0x060000, -- .size = 0x790000, -- } --}; -- - static struct physmap_flash_data ap83_flash_data = { - .width = 2, -- .parts = ap83_flash_partitions, -- .nr_parts = ARRAY_SIZE(ap83_flash_partitions), - }; - - static struct resource ap83_flash_resources[] = { diff --git a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch deleted file mode 100644 index 5e3d4d4..0000000 --- a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch +++ /dev/null @@ -1,95 +0,0 @@ ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -332,3 +332,78 @@ static void __init ubnt_uap_pro_setup(vo - MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", - ubnt_uap_pro_setup); - -+#define UBNT_XW_GPIO_LED_L1 11 -+#define UBNT_XW_GPIO_LED_L2 16 -+#define UBNT_XW_GPIO_LED_L3 13 -+#define UBNT_XW_GPIO_LED_L4 14 -+ -+static struct gpio_led ubnt_xw_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:red:link1", -+ .gpio = UBNT_XW_GPIO_LED_L1, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:orange:link2", -+ .gpio = UBNT_XW_GPIO_LED_L2, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:link3", -+ .gpio = UBNT_XW_GPIO_LED_L3, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:link4", -+ .gpio = UBNT_XW_GPIO_LED_L4, -+ .active_low = 1, -+ }, -+}; -+ -+static void __init ubnt_xw_init(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), -+ ubnt_xw_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+ -+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); -+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); -+ -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); -+ ath79_init_mac(ath79_eth0_data.mac_addr, -+ eeprom + UAP_PRO_MAC0_OFFSET, 0); -+ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+} -+ -+static void __init ubnt_nano_m_xw_setup(void) -+{ -+ ubnt_xw_init(); -+ -+ /* GMAC0 is connected to an AR8326 switch */ -+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); -+ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); -+ ath79_eth0_data.speed = SPEED_100; -+ ath79_eth0_data.duplex = DUPLEX_FULL; -+ ath79_register_eth(0); -+} -+ -+static void __init ubnt_loco_m_xw_setup(void) -+{ -+ ubnt_xw_init(); -+ -+ ath79_register_mdio(0, ~BIT(1)); -+ ath79_eth0_data.phy_mask = BIT(1); -+ ath79_register_eth(0); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", -+ ubnt_nano_m_xw_setup); -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", -+ ubnt_loco_m_xw_setup); ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -121,9 +121,11 @@ enum ath79_mach_type { - ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ - ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ - ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -+ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */ - ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ - ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ - ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -+ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */ - ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ - ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ - ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ diff --git a/target/linux/ar71xx/patches-3.10/634-MIPS-ath79-WNR2000V4-support.patch b/target/linux/ar71xx/patches-3.10/634-MIPS-ath79-WNR2000V4-support.patch deleted file mode 100644 index 270095a..0000000 --- a/target/linux/ar71xx/patches-3.10/634-MIPS-ath79-WNR2000V4-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -470,6 +470,16 @@ config ATH79_MACH_WNR2000_V3 - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -+config ATH79_MACH_WNR2000_V4 -+ bool "NETGEAR WNR2000 V4" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_OM2P - bool "OpenMesh OM2P board support" - select SOC_AR724X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -113,6 +113,7 @@ obj-$(CONFIG_ATH79_MACH_WNDR3700) += mac - obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o - obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o - obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o -+obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o - obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o - obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o - obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -138,6 +138,7 @@ enum ath79_mach_type { - ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */ - ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ - ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */ -+ ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */ - ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ - ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ - ATH79_MACH_WP543, /* Compex WP543 */ diff --git a/target/linux/ar71xx/patches-3.10/700-MIPS-ath79-add-TL-WA801NDv2-suport.patch b/target/linux/ar71xx/patches-3.10/700-MIPS-ath79-add-TL-WA801NDv2-suport.patch deleted file mode 100644 index 87c5053..0000000 --- a/target/linux/ar71xx/patches-3.10/700-MIPS-ath79-add-TL-WA801NDv2-suport.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -101,6 +101,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ - ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ - ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ -+ ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ - ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ - ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ - ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ diff --git a/target/linux/ar71xx/patches-3.10/701-MIPS-ath79-add-TL-WA901ND-v3-support.patch b/target/linux/ar71xx/patches-3.10/701-MIPS-ath79-add-TL-WA901ND-v3-support.patch deleted file mode 100644 index 0a9607f..0000000 --- a/target/linux/ar71xx/patches-3.10/701-MIPS-ath79-add-TL-WA901ND-v3-support.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -104,6 +104,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ - ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ - ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ -+ ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ - ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ - ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ - ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ diff --git a/target/linux/ar71xx/patches-3.10/702-MIPS-ath79-add-MyNet-N750-support.patch b/target/linux/ar71xx/patches-3.10/702-MIPS-ath79-add-MyNet-N750-support.patch deleted file mode 100644 index 07b2fee..0000000 --- a/target/linux/ar71xx/patches-3.10/702-MIPS-ath79-add-MyNet-N750-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -57,6 +57,7 @@ enum ath79_mach_type { - ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ - ATH79_MACH_MR600, /* OpenMesh MR600 */ - ATH79_MACH_MYNET_N600, /* WD My Net N600 */ -+ ATH79_MACH_MYNET_N750, /* WD My Net N750 */ - ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ - ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ - ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -820,6 +820,16 @@ config ATH79_MACH_MYNET_N600 - select ATH79_DEV_WMAC - select ATH79_NVRAM - -+config ATH79_MACH_MYNET_N750 -+ bool "WD My Net N750 board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ - config ATH79_MACH_MYNET_REXT - bool "WD My Net Wi-Fi Range Extender board support" - select SOC_AR934X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -67,6 +67,7 @@ obj-$(CONFIG_ATH79_MACH_JWAP003) += mach - obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o - obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o - obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o -+obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o - obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o - obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o - obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o diff --git a/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch b/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch deleted file mode 100644 index f59ac82..0000000 --- a/target/linux/ar71xx/patches-3.10/703-MIPS-ath79-add-RB91x-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -76,6 +76,7 @@ enum ath79_mach_type { - ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ - ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ - ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ -+ ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */ - ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ - ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ - ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -391,6 +391,16 @@ config ATH79_MACH_RB750 - select ATH79_ROUTERBOOT - select RLE_DECOMPRESS - -+config ATH79_MACH_RB91X -+ bool "MikroTik RouterBOARD 91X support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_SPI -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ select RLE_DECOMPRESS -+ - config ATH79_MACH_RB95X - bool "MikroTik RouterBOARD 95X support" - select SOC_AR934X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -78,6 +78,7 @@ obj-$(CONFIG_ATH79_MACH_PB44) += mach-p - obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o - obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o - obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o -+obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o - obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o - obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o - obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o diff --git a/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-TL-WDR4900v2-support.patch b/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-TL-WDR4900v2-support.patch deleted file mode 100644 index 848109e..0000000 --- a/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-TL-WDR4900v2-support.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -109,6 +109,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ - ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ - ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ -+ ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */ - ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ - ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ - ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -549,8 +549,9 @@ config ATH79_MACH_EAP7660D - select ATH79_DEV_M25P80 - - config ATH79_MACH_ARCHER_C7 -- bool "TP-LINK Archer C7 board support" -+ bool "TP-LINK Archer C7/TL-WDR4900 v2 board support" - select SOC_QCA955X -+ select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO diff --git a/target/linux/ar71xx/patches-3.10/705-MIPS-ath79-add-RB951Ui-2HnD-support.patch b/target/linux/ar71xx/patches-3.10/705-MIPS-ath79-add-RB951Ui-2HnD-support.patch deleted file mode 100644 index baceacb..0000000 --- a/target/linux/ar71xx/patches-3.10/705-MIPS-ath79-add-RB951Ui-2HnD-support.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -82,6 +82,7 @@ enum ath79_mach_type { - ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ - ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */ - ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ -+ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ - ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ - ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ - ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ diff --git a/target/linux/ar71xx/patches-3.10/706-MIPS-ath79-oolite-v1-support.patch b/target/linux/ar71xx/patches-3.10/706-MIPS-ath79-oolite-v1-support.patch deleted file mode 100644 index cf27ef5..0000000 --- a/target/linux/ar71xx/patches-3.10/706-MIPS-ath79-oolite-v1-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -50,6 +50,7 @@ enum ath79_mach_type { - ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ - ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ - ATH79_MACH_EAP7660D, /* Senao EAP7660D */ -+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ - ATH79_MACH_JA76PF, /* jjPlus JA76PF */ - ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ - ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -337,6 +337,16 @@ config ATH79_MACH_EW_DORIN - Say 'Y' here if you want your kernel to support the - Dorin Platform from www.80211.de . - -+config ATH79_MACH_GS_OOLITE -+ bool "GS Oolite V1 support" -+ select SOC_AR933X -+ select ARH79_DEV_ETH -+ select ARH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_JA76PF - bool "jjPlus JA76PF board support" - select SOC_AR71XX ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -62,6 +62,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m - obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o - obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o - obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o -+obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o - obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o - obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o - obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o diff --git a/target/linux/ar71xx/patches-3.10/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-3.10/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch deleted file mode 100644 index 00458d2..0000000 --- a/target/linux/ar71xx/patches-3.10/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch +++ /dev/null @@ -1,426 +0,0 @@ -From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001 -Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net> -From: Matthias Schiffer <mschiffer@universe-factory.net> -Date: Sat, 29 Mar 2014 20:26:08 +0100 -Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC - -Note that the clock calculation looks very similar to the QCA955x, but the -meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed. ---- - arch/mips/ath79/Kconfig | 6 +- - arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++++ - arch/mips/ath79/common.c | 4 ++ - arch/mips/ath79/dev-common.c | 1 + - arch/mips/ath79/dev-wmac.c | 20 +++++++ - arch/mips/ath79/early_printk.c | 1 + - arch/mips/ath79/gpio.c | 4 +- - arch/mips/ath79/irq.c | 4 ++ - arch/mips/ath79/setup.c | 8 ++- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++ - arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++ - 11 files changed, 182 insertions(+), 3 deletions(-) - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -929,6 +929,10 @@ config SOC_AR934X - select PCI_AR724X if PCI - def_bool n - -+config SOC_QCA953X -+ select USB_ARCH_HAS_EHCI -+ def_bool n -+ - config SOC_QCA955X - select USB_ARCH_HAS_EHCI - select HW_HAS_PCI -@@ -972,7 +976,7 @@ config ATH79_DEV_USB - def_bool n - - config ATH79_DEV_WMAC -- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) -+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) - def_bool n - - config ATH79_NVRAM ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -295,6 +295,82 @@ static void __init ar934x_clocks_init(vo - iounmap(dpll_base); - } - -+static void __init qca953x_clocks_init(void) -+{ -+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; -+ u32 cpu_pll, ddr_pll; -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); -+ if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40) -+ ath79_ref_clk.rate = 40 * 1000 * 1000; -+ else -+ ath79_ref_clk.rate = 25 * 1000 * 1000; -+ -+ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG); -+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK; -+ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_NINT_MASK; -+ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK; -+ -+ cpu_pll = nint * ath79_ref_clk.rate / ref_div; -+ cpu_pll += frac * (ath79_ref_clk.rate >> 6) / ref_div; -+ cpu_pll /= (1 << out_div); -+ -+ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG); -+ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK; -+ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_NINT_MASK; -+ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK; -+ -+ ddr_pll = nint * ath79_ref_clk.rate / ref_div; -+ ddr_pll += frac * (ath79_ref_clk.rate >> 6) / (ref_div << 4); -+ ddr_pll /= (1 << out_div); -+ -+ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS) -+ ath79_cpu_clk.rate = ath79_ref_clk.rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL) -+ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1); -+ else -+ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS) -+ ath79_ddr_clk.rate = ath79_ref_clk.rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL) -+ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1); -+ else -+ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS) -+ ath79_ahb_clk.rate = ath79_ref_clk.rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) -+ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1); -+ else -+ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1); -+ -+ ath79_wdt_clk.rate = ath79_ref_clk.rate; -+ ath79_uart_clk.rate = ath79_ref_clk.rate; -+} -+ - static void __init qca955x_clocks_init(void) - { - u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; -@@ -383,6 +459,8 @@ void __init ath79_clocks_init(void) - ar933x_clocks_init(); - else if (soc_is_ar934x()) - ar934x_clocks_init(); -+ else if (soc_is_qca953x()) -+ qca953x_clocks_init(); - else if (soc_is_qca955x()) - qca955x_clocks_init(); - else ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -73,6 +73,8 @@ void ath79_device_reset_set(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca953x()) -+ reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -@@ -101,6 +103,8 @@ void ath79_device_reset_clear(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca953x()) -+ reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -100,6 +100,7 @@ void __init ath79_register_uart(void) - soc_is_ar724x() || - soc_is_ar913x() || - soc_is_ar934x() || -+ soc_is_qca953x() || - soc_is_qca955x()) { - ath79_uart_data[0].uartclk = clk_get_rate(clk); - platform_device_register(&ath79_uart_device); ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -101,7 +101,7 @@ static int ar933x_wmac_reset(void) - return -ETIMEDOUT; - } - --static int ar933x_r1_get_wmac_revision(void) -+static int ar93xx_get_soc_revision(void) - { - return ath79_soc_rev; - } -@@ -126,7 +126,7 @@ static void __init ar933x_wmac_setup(voi - ath79_wmac_data.is_clk_25mhz = true; - - if (ath79_soc_rev == 1) -- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; -+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; - - ath79_wmac_data.external_reset = ar933x_wmac_reset; - } -@@ -149,6 +149,26 @@ static void ar934x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = true; - } - -+static void qca953x_wmac_setup(void) -+{ -+ u32 t; -+ -+ ath79_wmac_device.name = "qca953x_wmac"; -+ -+ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE; -+ ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1; -+ ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); -+ ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); -+ -+ t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); -+ if (t & QCA953X_BOOTSTRAP_REF_CLK_40) -+ ath79_wmac_data.is_clk_25mhz = false; -+ else -+ ath79_wmac_data.is_clk_25mhz = true; -+ -+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; -+} -+ - static void qca955x_wmac_setup(void) - { - u32 t; -@@ -366,6 +386,8 @@ void __init ath79_register_wmac(u8 *cal_ - ar933x_wmac_setup(); - else if (soc_is_ar934x()) - ar934x_wmac_setup(); -+ else if (soc_is_qca953x()) -+ qca953x_wmac_setup(); - else if (soc_is_qca955x()) - qca955x_wmac_setup(); - else ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -114,6 +114,7 @@ static void prom_putchar_init(void) - case REV_ID_MAJOR_AR9341: - case REV_ID_MAJOR_AR9342: - case REV_ID_MAJOR_AR9344: -+ case REV_ID_MAJOR_QCA9533: - case REV_ID_MAJOR_QCA9556: - case REV_ID_MAJOR_QCA9558: - _prom_putchar = prom_putchar_ar71xx; ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -224,6 +224,8 @@ void __init ath79_gpio_init(void) - ath79_gpio_count = AR933X_GPIO_COUNT; - else if (soc_is_ar934x()) - ath79_gpio_count = AR934X_GPIO_COUNT; -+ else if (soc_is_qca953x()) -+ ath79_gpio_count = QCA953X_GPIO_COUNT; - else if (soc_is_qca955x()) - ath79_gpio_count = QCA955X_GPIO_COUNT; - else -@@ -231,7 +233,7 @@ void __init ath79_gpio_init(void) - - ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); - ath79_gpio_chip.ngpio = ath79_gpio_count; -- if (soc_is_ar934x() || soc_is_qca955x()) { -+ if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x()) { - ath79_gpio_chip.direction_input = ar934x_gpio_direction_input; - ath79_gpio_chip.direction_output = ar934x_gpio_direction_output; - } ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -106,6 +106,7 @@ static void __init ath79_misc_irq_init(v - else if (soc_is_ar724x() || - soc_is_ar933x() || - soc_is_ar934x() || -+ soc_is_qca953x() || - soc_is_qca955x()) - ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; - else -@@ -352,6 +353,9 @@ void __init arch_init_irq(void) - } else if (soc_is_ar934x()) { - ath79_ip2_handler = ath79_default_ip2_handler; - ath79_ip3_handler = ar934x_ip3_handler; -+ } else if (soc_is_qca953x()) { -+ ath79_ip2_handler = ath79_default_ip2_handler; -+ ath79_ip3_handler = ath79_default_ip3_handler; - } else if (soc_is_qca955x()) { - ath79_ip2_handler = ath79_default_ip2_handler; - ath79_ip3_handler = ath79_default_ip3_handler; ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -151,6 +151,12 @@ static void __init ath79_detect_sys_type - rev = id & AR934X_REV_ID_REVISION_MASK; - break; - -+ case REV_ID_MAJOR_QCA9533: -+ ath79_soc = ATH79_SOC_QCA9533; -+ chip = "9533"; -+ rev = id & QCA953X_REV_ID_REVISION_MASK; -+ break; -+ - case REV_ID_MAJOR_QCA9556: - ath79_soc = ATH79_SOC_QCA9556; - chip = "9556"; -@@ -169,7 +175,7 @@ static void __init ath79_detect_sys_type - - ath79_soc_rev = rev; - -- if (soc_is_qca955x()) -+ if (soc_is_qca953x() || soc_is_qca955x()) - sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u", - chip, rev); - else ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -106,6 +106,9 @@ - #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) - #define AR934X_SRIF_SIZE 0x1000 - -+#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -+#define QCA953X_WMAC_SIZE 0x20000 -+ - #define QCA955X_PCI_MEM_BASE0 0x10000000 - #define QCA955X_PCI_MEM_BASE1 0x12000000 - #define QCA955X_PCI_MEM_SIZE 0x02000000 -@@ -280,6 +283,43 @@ - - #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) - -+#define QCA953X_PLL_CPU_CONFIG_REG 0x00 -+#define QCA953X_PLL_DDR_CONFIG_REG 0x04 -+#define QCA953X_PLL_CLK_CTRL_REG 0x08 -+#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c -+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48 -+ -+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6 -+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f -+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 -+ -+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10 -+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f -+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) -+ - #define QCA955X_PLL_CPU_CONFIG_REG 0x00 - #define QCA955X_PLL_DDR_CONFIG_REG 0x04 - #define QCA955X_PLL_CLK_CTRL_REG 0x08 -@@ -356,6 +396,10 @@ - #define AR934X_RESET_REG_BOOTSTRAP 0xb0 - #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - -+#define QCA953X_RESET_REG_RESET_MODULE 0x1c -+#define QCA953X_RESET_REG_BOOTSTRAP 0xb0 -+#define QCA953X_RESET_REG_EXT_INT_STATUS 0xac -+ - #define QCA955X_RESET_REG_RESET_MODULE 0x1c - #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 - #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac -@@ -504,6 +548,8 @@ - #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) - #define AR934X_BOOTSTRAP_DDR1 BIT(0) - -+#define QCA953X_BOOTSTRAP_REF_CLK_40 BIT(4) -+ - #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) - - #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) -@@ -566,6 +612,7 @@ - #define REV_ID_MAJOR_AR9341 0x0120 - #define REV_ID_MAJOR_AR9342 0x1120 - #define REV_ID_MAJOR_AR9344 0x2120 -+#define REV_ID_MAJOR_QCA9533 0x0140 - #define REV_ID_MAJOR_QCA9556 0x0130 - #define REV_ID_MAJOR_QCA9558 0x1130 - -@@ -588,6 +635,8 @@ - - #define AR934X_REV_ID_REVISION_MASK 0xf - -+#define QCA953X_REV_ID_REVISION_MASK 0xf -+ - #define QCA955X_REV_ID_REVISION_MASK 0xf - - /* -@@ -641,6 +690,7 @@ - #define AR913X_GPIO_COUNT 22 - #define AR933X_GPIO_COUNT 30 - #define AR934X_GPIO_COUNT 23 -+#define QCA953X_GPIO_COUNT 24 - #define QCA955X_GPIO_COUNT 24 - - /* ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -32,6 +32,7 @@ enum ath79_soc_type { - ATH79_SOC_AR9341, - ATH79_SOC_AR9342, - ATH79_SOC_AR9344, -+ ATH79_SOC_QCA9533, - ATH79_SOC_QCA9556, - ATH79_SOC_QCA9558, - }; -@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void) - return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344(); - } - -+static inline int soc_is_qca9533(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA9533; -+} -+ -+static inline int soc_is_qca953x(void) -+{ -+ return soc_is_qca9533(); -+} -+ - static inline int soc_is_qca9556(void) - { - return ath79_soc == ATH79_SOC_QCA9556; diff --git a/target/linux/ar71xx/patches-3.10/708-MIPS-ath79-TL-WR841v9-support.patch b/target/linux/ar71xx/patches-3.10/708-MIPS-ath79-TL-WR841v9-support.patch deleted file mode 100644 index 8905803..0000000 --- a/target/linux/ar71xx/patches-3.10/708-MIPS-ath79-TL-WR841v9-support.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -716,6 +716,15 @@ config ATH79_MACH_TL_WR841N_V8 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_TL_WR841N_V9 -+ bool "TP-LINK TL-WR841N/ND v9 support" -+ select SOC_QCA953X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_TL_WR941ND - bool "TP-LINK TL-WR941ND support" - select SOC_AR913X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -100,6 +100,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += m - obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o - obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o - obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o -+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o - obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o - obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o - obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -124,6 +124,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ - ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ - ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ -+ ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */ - ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ - ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ - ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ diff --git a/target/linux/ar71xx/patches-3.10/709-MIPS-ath79-HiWiFi-HC6361-support.patch b/target/linux/ar71xx/patches-3.10/709-MIPS-ath79-HiWiFi-HC6361-support.patch deleted file mode 100644 index ddc13bc..0000000 --- a/target/linux/ar71xx/patches-3.10/709-MIPS-ath79-HiWiFi-HC6361-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -63,6 +63,7 @@ obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mac - obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o - obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o - obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o -+obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o - obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o - obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o - obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -51,6 +51,7 @@ enum ath79_mach_type { - ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ - ATH79_MACH_EAP7660D, /* Senao EAP7660D */ - ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ -+ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ - ATH79_MACH_JA76PF, /* jjPlus JA76PF */ - ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ - ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -347,6 +347,16 @@ config ATH79_MACH_GS_OOLITE - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_HIWIFI_HC6361 -+ bool "HiWiFi HC6361 board support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_JA76PF - bool "jjPlus JA76PF board support" - select SOC_AR71XX diff --git a/target/linux/ar71xx/patches-3.10/709-MIPS-ath79-add-NBG6716.patch b/target/linux/ar71xx/patches-3.10/709-MIPS-ath79-add-NBG6716.patch deleted file mode 100644 index 8e1a949..0000000 --- a/target/linux/ar71xx/patches-3.10/709-MIPS-ath79-add-NBG6716.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -130,3 +130,4 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) + - obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o - obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o - obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o -+obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -64,6 +64,7 @@ enum ath79_mach_type { - ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ - ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ - ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ -+ ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ - ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ - ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ - ATH79_MACH_OM2P, /* OpenMesh OM2P */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -899,6 +899,17 @@ config ATH79_MACH_NBG460N - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -+config ATH79_MACH_NBG6716 -+ bool "Zyxel NBG6716 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_CARAMBOLA2 - bool "8devices Carambola2 board" - select SOC_AR933X diff --git a/target/linux/ar71xx/patches-3.10/710-MIPS-ath79-add-OM2Pv2.patch b/target/linux/ar71xx/patches-3.10/710-MIPS-ath79-add-OM2Pv2.patch deleted file mode 100644 index c87b1c0..0000000 --- a/target/linux/ar71xx/patches-3.10/710-MIPS-ath79-add-OM2Pv2.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -67,6 +67,7 @@ enum ath79_mach_type { - ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ - ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ - ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ -+ ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ - ATH79_MACH_OM2P, /* OpenMesh OM2P */ - ATH79_MACH_PB42, /* Atheros PB42 */ - ATH79_MACH_PB92, /* Atheros PB92 */ diff --git a/target/linux/ar71xx/patches-3.10/711-MIPS-ath79-add-OM2P-HSv2.patch b/target/linux/ar71xx/patches-3.10/711-MIPS-ath79-add-OM2P-HSv2.patch deleted file mode 100644 index 13e03cd..0000000 --- a/target/linux/ar71xx/patches-3.10/711-MIPS-ath79-add-OM2P-HSv2.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -65,6 +65,7 @@ enum ath79_mach_type { - ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ - ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ - ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ -+ ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */ - ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ - ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ - ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ diff --git a/target/linux/ar71xx/patches-3.10/712-MIPS-ath79-add-EasyLink-support.patch b/target/linux/ar71xx/patches-3.10/712-MIPS-ath79-add-EasyLink-support.patch deleted file mode 100644 index f697a1d..0000000 --- a/target/linux/ar71xx/patches-3.10/712-MIPS-ath79-add-EasyLink-support.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -50,6 +50,8 @@ enum ath79_mach_type { - ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ - ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ - ATH79_MACH_EAP7660D, /* Senao EAP7660D */ -+ ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ -+ ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ - ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ - ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ - ATH79_MACH_JA76PF, /* jjPlus JA76PF */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -337,6 +337,26 @@ config ATH79_MACH_EW_DORIN - Say 'Y' here if you want your kernel to support the - Dorin Platform from www.80211.de . - -+config ATH79_MACH_EL_M150 -+ bool "EasyLink EL-M150 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EL_MINI -+ bool "EasyLink EL-MINI support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_GS_OOLITE - bool "GS Oolite V1 support" - select SOC_AR933X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -62,6 +62,8 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m - obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o - obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o - obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o -+obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o -+obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o - obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o - obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o - obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o diff --git a/target/linux/ar71xx/patches-3.10/713-MIPS-ath79-add-RBSXTLite-support.patch b/target/linux/ar71xx/patches-3.10/713-MIPS-ath79-add-RBSXTLite-support.patch deleted file mode 100644 index ce09740..0000000 --- a/target/linux/ar71xx/patches-3.10/713-MIPS-ath79-add-RBSXTLite-support.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -462,6 +462,14 @@ config ATH79_MACH_RB2011 - select ATH79_ROUTERBOOT - select RLE_DECOMPRESS - -+config ATH79_MACH_RBSXTLITE -+ bool "MikroTik RouterBOARD SXT Lite" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_NFC -+ select ATH79_DEV_WMAC -+ select ATH79_ROUTERBOOT -+ - config ATH79_MACH_WNDAP360 - bool "NETGEAR WNDAP360 board support" - select SOC_AR71XX ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -93,6 +93,8 @@ enum ath79_mach_type { - ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ - ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ - ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ -+ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ -+ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ - ATH79_MACH_RW2458N, /* Redwave RW2458N */ - ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ - ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -85,6 +85,7 @@ obj-$(CONFIG_ATH79_MACH_RB750) += mach- - obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o - obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o - obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o -+obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o - obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o - obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o - obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o diff --git a/target/linux/ar71xx/patches-3.10/714-MIPS-ath79-add-TL-WA830REv2-support.patch b/target/linux/ar71xx/patches-3.10/714-MIPS-ath79-add-TL-WA830REv2-support.patch deleted file mode 100644 index aedc1bf..0000000 --- a/target/linux/ar71xx/patches-3.10/714-MIPS-ath79-add-TL-WA830REv2-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -656,6 +656,16 @@ config ATH79_MACH_TL_WAX50RE - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -+config ATH79_MACH_TL_WA830RE_V2 -+ bool "TP-LINK TL-WA830RE v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_TL_WA901ND - bool "TP-LINK TL-WA901ND/TL-WA7510N support" - select SOC_AR724X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -96,6 +96,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mac - obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o - obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o - obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o -+obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o - obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o - obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o - obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -114,6 +114,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ - ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ - ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ -+ ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */ - ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ - ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ - ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ diff --git a/target/linux/ar71xx/patches-3.10/715-MIPS-ath79-add-TL-WA860RE-support.patch b/target/linux/ar71xx/patches-3.10/715-MIPS-ath79-add-TL-WA860RE-support.patch deleted file mode 100644 index 1733d66..0000000 --- a/target/linux/ar71xx/patches-3.10/715-MIPS-ath79-add-TL-WA860RE-support.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -113,6 +113,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ - ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ - ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ -+ ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */ - ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ - ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */ - ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ diff --git a/target/linux/ar71xx/patches-3.10/716-MIPS-ath79-add_mikrotik_rb2011uias.patch b/target/linux/ar71xx/patches-3.10/716-MIPS-ath79-add_mikrotik_rb2011uias.patch deleted file mode 100644 index b54eb21..0000000 --- a/target/linux/ar71xx/patches-3.10/716-MIPS-ath79-add_mikrotik_rb2011uias.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/arch/mips/ath79/mach-rb2011.c -+++ b/arch/mips/ath79/mach-rb2011.c -@@ -321,6 +321,13 @@ static void __init rb2011us_setup(void) - - MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup); - -+static void __init rb2011r5_setup(void) -+{ -+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB); -+} -+ -+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup); -+ - static void __init rb2011g_setup(void) - { - rb2011_setup(RB2011_FLAG_SFP | ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -93,6 +93,7 @@ enum ath79_mach_type { - ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ - ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ - ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ -+ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS */ - ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ - ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ - ATH79_MACH_RW2458N, /* Redwave RW2458N */ diff --git a/target/linux/ar71xx/patches-3.10/717-MIPS-ath79-add-gl-inet-v1-support.patch b/target/linux/ar71xx/patches-3.10/717-MIPS-ath79-add-gl-inet-v1-support.patch deleted file mode 100644 index d85ad23..0000000 --- a/target/linux/ar71xx/patches-3.10/717-MIPS-ath79-add-gl-inet-v1-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -357,6 +357,16 @@ config ATH79_MACH_EL_MINI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_GL_INET -+ bool "GL-INET support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_GS_OOLITE - bool "GS Oolite V1 support" - select SOC_AR933X ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -52,6 +52,7 @@ enum ath79_mach_type { - ATH79_MACH_EAP7660D, /* Senao EAP7660D */ - ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ - ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ -+ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ - ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ - ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ - ATH79_MACH_JA76PF, /* jjPlus JA76PF */ ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mac - obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o - obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o - obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o -+obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o - obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o - obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o - obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o diff --git a/target/linux/ar71xx/patches-3.10/718-MIPS-ath79-add-ESR1750-support.patch b/target/linux/ar71xx/patches-3.10/718-MIPS-ath79-add-ESR1750-support.patch deleted file mode 100644 index e52a739..0000000 --- a/target/linux/ar71xx/patches-3.10/718-MIPS-ath79-add-ESR1750-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -177,6 +177,16 @@ config ATH79_MACH_AW_NR580 - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -+config ATH79_MACH_ESR1750 -+ bool "EnGenius ESR1750 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_WHR_HP_G300N - bool "Buffalo WHR-HP-G300N board support" - select SOC_AR724X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mac - obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o - obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o - obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o -+obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o - obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o - obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o - obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -52,6 +52,7 @@ enum ath79_mach_type { - ATH79_MACH_EAP7660D, /* Senao EAP7660D */ - ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ - ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ -+ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ - ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ - ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ - ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ diff --git a/target/linux/ar71xx/patches-3.10/719-MIPS-ath79-add-ESR900-support.patch b/target/linux/ar71xx/patches-3.10/719-MIPS-ath79-add-ESR900-support.patch deleted file mode 100644 index cbb4472..0000000 --- a/target/linux/ar71xx/patches-3.10/719-MIPS-ath79-add-ESR900-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -47,6 +47,7 @@ enum ath79_mach_type { - ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ - ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ - ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ -+ ATH79_MACH_ESR900, /* EnGenius ESR900 */ - ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ - ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ - ATH79_MACH_EAP7660D, /* Senao EAP7660D */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -335,6 +335,16 @@ config ATH79_MACH_DRAGINO2 - select ATH79_DEV_ETH - select ATH79_DEV_USB - -+config ATH79_MACH_ESR900 -+ bool "EnGenius ESR900 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_EW_DORIN - bool "embedded wireless Dorin Platform support" - select SOC_AR933X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -60,6 +60,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += m - obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o - obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o - obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o -+obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o - obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o - obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o - obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o diff --git a/target/linux/ar71xx/patches-3.10/720-MIPS-ath79-add-Tube2H-support.patch b/target/linux/ar71xx/patches-3.10/720-MIPS-ath79-add-Tube2H-support.patch deleted file mode 100644 index 856c0e1..0000000 --- a/target/linux/ar71xx/patches-3.10/720-MIPS-ath79-add-Tube2H-support.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -141,6 +141,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */ - ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ - ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ -+ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */ - ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ - ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ - ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -29,6 +29,15 @@ config ATH79_MACH_ALFA_NX - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -+config ATH79_MACH_TUBE2H -+ bool "ALFA Network Tube2H board support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_ALL0258N - bool "Allnet ALL0258N support" - select SOC_AR724X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -116,6 +116,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) - obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o - obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o - obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o -+obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o - obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o - obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o - obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o diff --git a/target/linux/ar71xx/patches-3.10/721-MIPS-ath79-add-EAP300v2-support.patch b/target/linux/ar71xx/patches-3.10/721-MIPS-ath79-add-EAP300v2-support.patch deleted file mode 100644 index 0d396b7..0000000 --- a/target/linux/ar71xx/patches-3.10/721-MIPS-ath79-add-EAP300v2-support.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -50,6 +50,7 @@ enum ath79_mach_type { - ATH79_MACH_ESR900, /* EnGenius ESR900 */ - ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ - ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ -+ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ - ATH79_MACH_EAP7660D, /* Senao EAP7660D */ - ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ - ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -396,6 +396,15 @@ config ATH79_MACH_GL_INET - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_EAP300V2 -+ bool "EnGenius EAP300 v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_GS_OOLITE - bool "GS Oolite V1 support" - select SOC_AR933X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -62,6 +62,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m - obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o - obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o - obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o -+obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o - obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o - obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o - obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o diff --git a/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch b/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch deleted file mode 100644 index 7ff07b6..0000000 --- a/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch +++ /dev/null @@ -1,90 +0,0 @@ ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -17,9 +17,11 @@ - #include <linux/etherdevice.h> - #include <linux/ar8216_platform.h> - -+#include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/irq.h> - #include <asm/mach-ath79/ar71xx_regs.h> - -+#include "common.h" - #include "dev-ap9x-pci.h" - #include "dev-eth.h" - #include "dev-gpio-buttons.h" -@@ -407,3 +409,65 @@ MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, - - MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", - ubnt_loco_m_xw_setup); -+ -+static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = { -+ { -+ .name = "ubnt:blue:wlan", -+ .gpio = 0, -+ }, { -+ .name = "ubnt:white:status", -+ .gpio = 1, -+ }, -+}; -+ -+static struct gpio_keys_button airgateway_gpio_keys[] __initdata = { -+ { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = 12, -+ .active_low = 1, -+ } -+}; -+ -+static void __init ubnt_airgateway_setup(void) -+{ -+ u32 t; -+ u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ -+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | -+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | -+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | -+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | -+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); -+ -+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); -+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; -+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds), -+ ubnt_airgateway_gpio_leds); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(airgateway_gpio_keys), -+ airgateway_gpio_keys); -+ -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ -+ ath79_register_mdio(0, 0x0); -+ -+ ath79_register_eth(1); -+ ath79_register_eth(0); -+ -+ ath79_register_wmac(ee, NULL); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway", -+ ubnt_airgateway_setup); -+ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -143,6 +143,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ - ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ - ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */ -+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */ - ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ - ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ - ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */ diff --git a/target/linux/ar71xx/patches-3.10/723-MIPS-ath79-add-om5p-support.patch b/target/linux/ar71xx/patches-3.10/723-MIPS-ath79-add-om5p-support.patch deleted file mode 100644 index e5ce232..0000000 --- a/target/linux/ar71xx/patches-3.10/723-MIPS-ath79-add-om5p-support.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -76,6 +76,7 @@ enum ath79_mach_type { - ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ - ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ - ATH79_MACH_OM2P, /* OpenMesh OM2P */ -+ ATH79_MACH_OM5P, /* OpenMesh OM5P */ - ATH79_MACH_PB42, /* Atheros PB42 */ - ATH79_MACH_PB92, /* Atheros PB92 */ - ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -587,6 +587,15 @@ config ATH79_MACH_OM2P - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -+config ATH79_MACH_OM5P -+ bool "OpenMesh OM5P board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_MR600 - bool "OpenMesh MR600 board support" - select SOC_AR934X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -81,6 +81,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += ma - obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o - obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o - obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o -+obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o - obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o - obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o - obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o diff --git a/target/linux/ar71xx/patches-3.10/724-MIPS-ath79-archer_c5-support.patch b/target/linux/ar71xx/patches-3.10/724-MIPS-ath79-archer_c5-support.patch deleted file mode 100644 index 0668dfe..0000000 --- a/target/linux/ar71xx/patches-3.10/724-MIPS-ath79-archer_c5-support.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -31,6 +31,7 @@ enum ath79_mach_type { - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_AP83, /* Atheros AP83 */ - ATH79_MACH_AP96, /* Atheros AP96 */ -+ ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ - ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ - ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ - ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -654,7 +654,7 @@ config ATH79_MACH_EAP7660D - select ATH79_DEV_M25P80 - - config ATH79_MACH_ARCHER_C7 -- bool "TP-LINK Archer C7/TL-WDR4900 v2 board support" -+ bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH diff --git a/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch b/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch deleted file mode 100644 index a96b2a4..0000000 --- a/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -103,6 +103,7 @@ enum ath79_mach_type { - ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ - ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ - ATH79_MACH_RW2458N, /* Redwave RW2458N */ -+ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ - ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ - ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ - ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE - select ATH79_DEV_WMAC - select ATH79_ROUTERBOOT - -+config ATH79_MACH_SMART_300 -+ bool "NC-LINK SMART-300 board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_WNDAP360 - bool "NETGEAR WNDAP360 board support" - select SOC_AR71XX ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach- - obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o - obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o - obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o -+obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o - obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o - obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o - obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o diff --git a/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add_mikrotik_rb2011uias-2hnd.patch b/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add_mikrotik_rb2011uias-2hnd.patch deleted file mode 100644 index f49d713..0000000 --- a/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add_mikrotik_rb2011uias-2hnd.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/ath79/mach-rb2011.c -+++ b/arch/mips/ath79/mach-rb2011.c -@@ -323,7 +323,7 @@ MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US - - static void __init rb2011r5_setup(void) - { -- rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB); -+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN); - } - - MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup); ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -99,7 +99,7 @@ enum ath79_mach_type { - ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ - ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ - ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ -- ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS */ -+ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */ - ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ - ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ - ATH79_MACH_RW2458N, /* Redwave RW2458N */ diff --git a/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch b/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch deleted file mode 100644 index c815b14..0000000 --- a/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -1034,6 +1034,17 @@ config ATH79_MACH_BHU_BXU2000N2_A - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_QIHOO_C301 -+ bool "Qihoo 360 C301 board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ select ATH79_NVRAM -+ - endmenu - - config SOC_AR71XX ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -80,6 +80,7 @@ enum ath79_mach_type { - ATH79_MACH_OM5P, /* OpenMesh OM5P */ - ATH79_MACH_PB42, /* Atheros PB42 */ - ATH79_MACH_PB92, /* Atheros PB92 */ -+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ - ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ - ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ - ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -85,6 +85,7 @@ obj-$(CONFIG_ATH79_MACH_OM5P) += mach-o - obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o - obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o - obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o -+obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o - obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o - obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o - obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o diff --git a/target/linux/ar71xx/patches-3.10/727-MIPS-ath79-ar934x-wmac-revision.patch b/target/linux/ar71xx/patches-3.10/727-MIPS-ath79-ar934x-wmac-revision.patch deleted file mode 100644 index b1b4946..0000000 --- a/target/linux/ar71xx/patches-3.10/727-MIPS-ath79-ar934x-wmac-revision.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -147,6 +147,8 @@ static void ar934x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = false; - else - ath79_wmac_data.is_clk_25mhz = true; -+ -+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; - } - - static void qca953x_wmac_setup(void) diff --git a/target/linux/ar71xx/patches-3.10/728-MIPS-ath79-fix-restart.patch b/target/linux/ar71xx/patches-3.10/728-MIPS-ath79-fix-restart.patch deleted file mode 100644 index 0027c59..0000000 --- a/target/linux/ar71xx/patches-3.10/728-MIPS-ath79-fix-restart.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP - - static void ath79_restart(char *command) - { -+ local_irq_disable(); - ath79_device_reset_set(AR71XX_RESET_FULL_CHIP); - for (;;) - if (cpu_wait) diff --git a/target/linux/ar71xx/patches-3.10/729-MIPS-ath79-add-WZR-450HP2.patch b/target/linux/ar71xx/patches-3.10/729-MIPS-ath79-add-WZR-450HP2.patch deleted file mode 100644 index 3df8986..0000000 --- a/target/linux/ar71xx/patches-3.10/729-MIPS-ath79-add-WZR-450HP2.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -263,6 +263,16 @@ config ATH79_MACH_WZR_HP_G450H - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -+config ATH79_MACH_WZR_450HP2 -+ bool "Buffalo WZR-450HP2 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_WP543 - bool "Compex WP543/WPJ543 board support" - select SOC_AR71XX ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) + - obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o - obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o - obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o -+obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o - obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o - obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o - obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -183,6 +183,7 @@ enum ath79_mach_type { - ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ - ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ - ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ -+ ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */ - ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ - ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ - }; diff --git a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch deleted file mode 100644 index 6ca0595..0000000 --- a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -39,6 +39,7 @@ - ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ -+ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */ - ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ - ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ - ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -283,6 +283,17 @@ - select ATH79_DEV_USB - select MYLOADER - -+config ATH79_MACH_DHP_1565_A1 -+ bool "D-Link DHP-1565 rev. A1 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_DIR_505_A1 - bool "D-Link DIR-505-A1 support" - select SOC_AR933X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -54,6 +54,7 @@ - obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o - obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o - obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o -+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o - obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o - obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o - obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o diff --git a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-mr900-support.patch b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-mr900-support.patch deleted file mode 100644 index deb6e56..0000000 --- a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-mr900-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -654,6 +654,16 @@ config ATH79_MACH_CAP4200AG - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -+config ATH79_MACH_MR900 -+ bool "OpenMesh MR900 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_EAP7660D - bool "Senao EAP7660D support" - select SOC_AR71XX ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach - obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o - obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o - obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o -+obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o - obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o - obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o - obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -65,6 +65,7 @@ enum ath79_mach_type { - ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ - ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ - ATH79_MACH_MR600, /* OpenMesh MR600 */ -+ ATH79_MACH_MR900, /* OpenMesh MR900 */ - ATH79_MACH_MYNET_N600, /* WD My Net N600 */ - ATH79_MACH_MYNET_N750, /* WD My Net N750 */ - ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ diff --git a/target/linux/ar71xx/patches-3.10/731-MIPS-ath79-add-mr900v2-support.patch b/target/linux/ar71xx/patches-3.10/731-MIPS-ath79-add-mr900v2-support.patch deleted file mode 100644 index be51a8e..0000000 --- a/target/linux/ar71xx/patches-3.10/731-MIPS-ath79-add-mr900v2-support.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -66,6 +66,7 @@ enum ath79_mach_type { - ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ - ATH79_MACH_MR600, /* OpenMesh MR600 */ - ATH79_MACH_MR900, /* OpenMesh MR900 */ -+ ATH79_MACH_MR900v2, /* OpenMesh MR900v2 */ - ATH79_MACH_MYNET_N600, /* WD My Net N600 */ - ATH79_MACH_MYNET_N750, /* WD My Net N750 */ - ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ diff --git a/target/linux/ar71xx/patches-3.10/901-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-3.10/901-mdio_bitbang_ignore_ta_value.patch deleted file mode 100644 index 39584aa..0000000 --- a/target/linux/ar71xx/patches-3.10/901-mdio_bitbang_ignore_ta_value.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/phy/mdio-bitbang.c -+++ b/drivers/net/phy/mdio-bitbang.c -@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b - - ctrl->ops->set_mdio_dir(ctrl, 0); - -- /* check the turnaround bit: the PHY should be driving it to zero */ -- if (mdiobb_get_bit(ctrl) != 0) { -- /* PHY didn't drive TA low -- flush any bits it -- * may be trying to send. -- */ -- for (i = 0; i < 32; i++) -- mdiobb_get_bit(ctrl); -- -- return 0xffff; -- } -+ mdiobb_get_bit(ctrl); - - ret = mdiobb_get_num(ctrl, 16); - mdiobb_get_bit(ctrl); diff --git a/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch deleted file mode 100644 index 4217545..0000000 --- a/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch +++ /dev/null @@ -1,920 +0,0 @@ ---- a/arch/mips/include/asm/checksum.h -+++ b/arch/mips/include/asm/checksum.h -@@ -104,26 +104,30 @@ static inline __sum16 ip_fast_csum(const - const unsigned int *stop = word + ihl; - unsigned int csum; - int carry; -+ unsigned int w; - -- csum = word[0]; -- csum += word[1]; -- carry = (csum < word[1]); -+ csum = net_hdr_word(word++); -+ -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[2]; -- carry = (csum < word[2]); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[3]; -- carry = (csum < word[3]); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- word += 4; - do { -- csum += *word; -- carry = (csum < *word); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; -- word++; - } while (word != stop); - - return csum_fold(csum); -@@ -192,69 +196,4 @@ static inline __sum16 ip_compute_csum(co - return csum_fold(csum_partial(buff, len, 0)); - } - --#define _HAVE_ARCH_IPV6_CSUM --static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, -- const struct in6_addr *daddr, -- __u32 len, unsigned short proto, -- __wsum sum) --{ -- __asm__( -- " .set push # csum_ipv6_magic\n" -- " .set noreorder \n" -- " .set noat \n" -- " addu %0, %5 # proto (long in network byte order)\n" -- " sltu $1, %0, %5 \n" -- " addu %0, $1 \n" -- -- " addu %0, %6 # csum\n" -- " sltu $1, %0, %6 \n" -- " lw %1, 0(%2) # four words source address\n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 4(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 8(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 12(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 0(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 4(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 8(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 12(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " addu %0, $1 # Add final carry\n" -- " .set pop" -- : "=r" (sum), "=r" (proto) -- : "r" (saddr), "r" (daddr), -- "0" (htonl(len)), "1" (htonl(proto)), "r" (sum)); -- -- return csum_fold(sum); --} -- - #endif /* _ASM_CHECKSUM_H */ ---- a/include/uapi/linux/ip.h -+++ b/include/uapi/linux/ip.h -@@ -102,7 +102,7 @@ struct iphdr { - __be32 saddr; - __be32 daddr; - /*The options start here. */ --}; -+} __attribute__((packed, aligned(2))); - - - struct ip_auth_hdr { ---- a/include/uapi/linux/ipv6.h -+++ b/include/uapi/linux/ipv6.h -@@ -125,7 +125,7 @@ struct ipv6hdr { - - struct in6_addr saddr; - struct in6_addr daddr; --}; -+} __attribute__((packed, aligned(2))); - - - /* index values for the variables in ipv6_devconf */ ---- a/include/uapi/linux/tcp.h -+++ b/include/uapi/linux/tcp.h -@@ -54,7 +54,7 @@ struct tcphdr { - __be16 window; - __sum16 check; - __be16 urg_ptr; --}; -+} __attribute__((packed, aligned(2))); - - /* - * The union cast uses a gcc extension to avoid aliasing problems -@@ -64,7 +64,7 @@ struct tcphdr { - union tcp_word_hdr { - struct tcphdr hdr; - __be32 words[5]; --}; -+} __attribute__((packed, aligned(2))); - - #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) - ---- a/include/uapi/linux/udp.h -+++ b/include/uapi/linux/udp.h -@@ -24,7 +24,7 @@ struct udphdr { - __be16 dest; - __be16 len; - __sum16 check; --}; -+} __attribute__((packed, aligned(2))); - - /* UDP socket options */ - #define UDP_CORK 1 /* Never send partially complete segments */ ---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -@@ -40,8 +40,8 @@ static bool ipv4_pkt_to_tuple(const stru - if (ap == NULL) - return false; - -- tuple->src.u3.ip = ap[0]; -- tuple->dst.u3.ip = ap[1]; -+ tuple->src.u3.ip = net_hdr_word(ap++); -+ tuple->dst.u3.ip = net_hdr_word(ap); - - return true; - } ---- a/include/uapi/linux/icmp.h -+++ b/include/uapi/linux/icmp.h -@@ -80,7 +80,7 @@ struct icmphdr { - __be16 mtu; - } frag; - } un; --}; -+} __attribute__((packed, aligned(2))); - - - /* ---- a/include/uapi/linux/in6.h -+++ b/include/uapi/linux/in6.h -@@ -36,7 +36,7 @@ struct in6_addr { - #define s6_addr in6_u.u6_addr8 - #define s6_addr16 in6_u.u6_addr16 - #define s6_addr32 in6_u.u6_addr32 --}; -+} __attribute__((packed, aligned(2))); - - struct sockaddr_in6 { - unsigned short int sin6_family; /* AF_INET6 */ ---- a/net/ipv6/af_inet6.c -+++ b/net/ipv6/af_inet6.c -@@ -60,6 +60,7 @@ - #endif - - #include <asm/uaccess.h> -+#include <asm/unaligned.h> - #include <linux/mroute6.h> - - MODULE_AUTHOR("Cast of dozens"); -@@ -687,7 +688,7 @@ bool ipv6_opt_accepted(const struct sock - if ((opt->hop && (np->rxopt.bits.hopopts || - np->rxopt.bits.ohopopts)) || - ((IPV6_FLOWINFO_MASK & -- *(__be32 *)skb_network_header(skb)) && -+ net_hdr_word(skb_network_header(skb))) && - np->rxopt.bits.rxflow) || - (opt->srcrt && (np->rxopt.bits.srcrt || - np->rxopt.bits.osrcrt)) || ---- a/net/ipv6/tcp_ipv6.c -+++ b/net/ipv6/tcp_ipv6.c -@@ -64,6 +64,7 @@ - #include <net/secure_seq.h> - #include <net/tcp_memcontrol.h> - -+#include <asm/unaligned.h> - #include <asm/uaccess.h> - - #include <linux/proc_fs.h> -@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct - topt = (__be32 *)(t1 + 1); - - if (tsecr) { -- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); -- *topt++ = htonl(tsval); -- *topt++ = htonl(tsecr); -+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++); -+ put_unaligned_be32(tsval, topt++); -+ put_unaligned_be32(tsecr, topt++); - } - - #ifdef CONFIG_TCP_MD5SIG ---- a/include/linux/ipv6.h -+++ b/include/linux/ipv6.h -@@ -4,6 +4,7 @@ - #include <uapi/linux/ipv6.h> - - #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) -+ - /* - * This structure contains configuration options per IPv6 link. - */ ---- a/net/ipv6/datagram.c -+++ b/net/ipv6/datagram.c -@@ -365,7 +365,7 @@ int ipv6_recv_error(struct sock *sk, str - ipv6_iface_scope_id(&sin->sin6_addr, - IP6CB(skb)->iif); - } else { -- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset), -+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset), - &sin->sin6_addr); - sin->sin6_scope_id = 0; - } -@@ -691,12 +691,12 @@ int ip6_datagram_send_ctl(struct net *ne - } - - if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { -- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) { -+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) { - err = -EINVAL; - goto exit_f; - } - } -- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg); -+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg)); - break; - - case IPV6_2292HOPOPTS: ---- a/net/ipv6/ip6_gre.c -+++ b/net/ipv6/ip6_gre.c -@@ -391,7 +391,7 @@ static void ip6gre_err(struct sk_buff *s - - t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr, - flags & GRE_KEY ? -- *(((__be32 *)p) + (grehlen / 4) - 1) : 0, -+ net_hdr_word(((__be32 *)p) + (grehlen / 4) - 1) : 0, - p[1]); - if (t == NULL) - return; -@@ -483,11 +483,11 @@ static int ip6gre_rcv(struct sk_buff *sk - offset += 4; - } - if (flags&GRE_KEY) { -- key = *(__be32 *)(h + offset); -+ key = net_hdr_word(h + offset); - offset += 4; - } - if (flags&GRE_SEQ) { -- seqno = ntohl(*(__be32 *)(h + offset)); -+ seqno = ntohl(net_hdr_word(h + offset)); - offset += 4; - } - } -@@ -747,7 +747,7 @@ static netdev_tx_t ip6gre_xmit2(struct s - - if (tunnel->parms.o_flags&GRE_SEQ) { - ++tunnel->o_seqno; -- *ptr = htonl(tunnel->o_seqno); -+ net_hdr_word(ptr) = htonl(tunnel->o_seqno); - ptr--; - } - if (tunnel->parms.o_flags&GRE_KEY) { -@@ -841,9 +841,9 @@ static inline int ip6gre_xmit_ipv6(struc - - dsfield = ipv6_get_dsfield(ipv6h); - if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS) -- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK); -+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK; - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL) -- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_FLOWLABEL_MASK); -+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_FLOWLABEL_MASK; - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) - fl6.flowi6_mark = skb->mark; - ---- a/net/ipv6/ip6_tunnel.c -+++ b/net/ipv6/ip6_tunnel.c -@@ -1273,9 +1273,9 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str - - dsfield = ipv6_get_dsfield(ipv6h); - if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS) -- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK); -+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK; - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL) -- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_FLOWLABEL_MASK); -+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_FLOWLABEL_MASK; - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) - fl6.flowi6_mark = skb->mark; - ---- a/net/ipv6/exthdrs.c -+++ b/net/ipv6/exthdrs.c -@@ -573,7 +573,7 @@ static bool ipv6_hop_jumbo(struct sk_buf - goto drop; - } - -- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2)); -+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2)); - if (pkt_len <= IPV6_MAXPLEN) { - IP6_INC_STATS_BH(net, ipv6_skb_idev(skb), - IPSTATS_MIB_INHDRERRORS); ---- a/include/linux/types.h -+++ b/include/linux/types.h -@@ -212,5 +212,11 @@ struct callback_head { - }; - #define rcu_head callback_head - -+struct net_hdr_word { -+ u32 words[1]; -+} __attribute__((packed, aligned(2))); -+ -+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0]) -+ - #endif /* __ASSEMBLY__ */ - #endif /* _LINUX_TYPES_H */ ---- a/net/ipv4/af_inet.c -+++ b/net/ipv4/af_inet.c -@@ -1381,8 +1381,8 @@ static struct sk_buff **inet_gro_receive - if (unlikely(ip_fast_csum((u8 *)iph, 5))) - goto out_unlock; - -- id = ntohl(*(__be32 *)&iph->id); -- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id ^ IP_DF)); -+ id = ntohl(net_hdr_word(&iph->id)); -+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id ^ IP_DF)); - id >>= 16; - - for (p = *head; p; p = p->next) { ---- a/net/ipv4/route.c -+++ b/net/ipv4/route.c -@@ -462,7 +462,7 @@ static struct neighbour *ipv4_neigh_look - else if (skb) - pkey = &ip_hdr(skb)->daddr; - -- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey); -+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey)); - if (n) - return n; - return neigh_create(&arp_tbl, pkey, dev); ---- a/net/ipv4/tcp_output.c -+++ b/net/ipv4/tcp_output.c -@@ -412,48 +412,53 @@ static void tcp_options_write(__be32 *pt - u16 options = opts->options; /* mungable copy */ - - if (unlikely(OPTION_MD5 & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); - /* overload cookie hash location */ - opts->hash_location = (__u8 *)ptr; - ptr += 4; - } - - if (unlikely(opts->mss)) { -- *ptr++ = htonl((TCPOPT_MSS << 24) | -- (TCPOLEN_MSS << 16) | -- opts->mss); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | -+ opts->mss); - } - - if (likely(OPTION_TS & options)) { - if (unlikely(OPTION_SACK_ADVERTISE & options)) { -- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) | -- (TCPOLEN_SACK_PERM << 16) | -- (TCPOPT_TIMESTAMP << 8) | -- TCPOLEN_TIMESTAMP); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_SACK_PERM << 24) | -+ (TCPOLEN_SACK_PERM << 16) | -+ (TCPOPT_TIMESTAMP << 8) | -+ TCPOLEN_TIMESTAMP); - options &= ~OPTION_SACK_ADVERTISE; - } else { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_TIMESTAMP << 8) | -- TCPOLEN_TIMESTAMP); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | -+ TCPOLEN_TIMESTAMP); - } -- *ptr++ = htonl(opts->tsval); -- *ptr++ = htonl(opts->tsecr); -+ net_hdr_word(ptr++) = htonl(opts->tsval); -+ net_hdr_word(ptr++) = htonl(opts->tsecr); - } - - if (unlikely(OPTION_SACK_ADVERTISE & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_SACK_PERM << 8) | -- TCPOLEN_SACK_PERM); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_SACK_PERM << 8) | -+ TCPOLEN_SACK_PERM); - } - - if (unlikely(OPTION_WSCALE & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_WINDOW << 16) | -- (TCPOLEN_WINDOW << 8) | -- opts->ws); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_WINDOW << 16) | -+ (TCPOLEN_WINDOW << 8) | -+ opts->ws); - } - - if (unlikely(opts->num_sack_blocks)) { -@@ -461,16 +466,17 @@ static void tcp_options_write(__be32 *pt - tp->duplicate_sack : tp->selective_acks; - int this_sack; - -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_SACK << 8) | -- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_SACK << 8) | -+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * - TCPOLEN_SACK_PERBLOCK))); - - for (this_sack = 0; this_sack < opts->num_sack_blocks; - ++this_sack) { -- *ptr++ = htonl(sp[this_sack].start_seq); -- *ptr++ = htonl(sp[this_sack].end_seq); -+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq); -+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq); - } - - tp->rx_opt.dsack = 0; -@@ -479,9 +485,10 @@ static void tcp_options_write(__be32 *pt - if (unlikely(OPTION_FAST_OPEN_COOKIE & options)) { - struct tcp_fastopen_cookie *foc = opts->fastopen_cookie; - -- *ptr++ = htonl((TCPOPT_EXP << 24) | -- ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) | -- TCPOPT_FASTOPEN_MAGIC); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_EXP << 24) | -+ ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) | -+ TCPOPT_FASTOPEN_MAGIC); - - memcpy(ptr, foc->val, foc->len); - if ((foc->len & 3) == 2) { ---- a/net/ipv4/igmp.c -+++ b/net/ipv4/igmp.c -@@ -470,7 +470,7 @@ static struct sk_buff *add_grec(struct s - if (!skb) - return NULL; - psrc = (__be32 *)skb_put(skb, sizeof(__be32)); -- *psrc = psf->sf_inaddr; -+ net_hdr_word(psrc) = psf->sf_inaddr; - scount++; stotal++; - if ((type == IGMPV3_ALLOW_NEW_SOURCES || - type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) { ---- a/include/uapi/linux/igmp.h -+++ b/include/uapi/linux/igmp.h -@@ -32,7 +32,7 @@ struct igmphdr { - __u8 code; /* For newer IGMP */ - __sum16 csum; - __be32 group; --}; -+} __attribute__((packed, aligned(2))); - - /* V3 group record types [grec_type] */ - #define IGMPV3_MODE_IS_INCLUDE 1 -@@ -48,7 +48,7 @@ struct igmpv3_grec { - __be16 grec_nsrcs; - __be32 grec_mca; - __be32 grec_src[0]; --}; -+} __attribute__((packed, aligned(2))); - - struct igmpv3_report { - __u8 type; -@@ -57,7 +57,7 @@ struct igmpv3_report { - __be16 resv2; - __be16 ngrec; - struct igmpv3_grec grec[0]; --}; -+} __attribute__((packed, aligned(2))); - - struct igmpv3_query { - __u8 type; -@@ -78,7 +78,7 @@ struct igmpv3_query { - __u8 qqic; - __be16 nsrcs; - __be32 srcs[0]; --}; -+} __attribute__((packed, aligned(2))); - - #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ - #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ ---- a/net/core/flow_dissector.c -+++ b/net/core/flow_dissector.c -@@ -157,7 +157,7 @@ ipv6: - ports = skb_header_pointer(skb, nhoff + poff, - sizeof(_ports), &_ports); - if (ports) -- flow->ports = *ports; -+ flow->ports = net_hdr_word(ports); - } - - flow->thoff = (u16) nhoff; ---- a/include/uapi/linux/icmpv6.h -+++ b/include/uapi/linux/icmpv6.h -@@ -76,7 +76,7 @@ struct icmp6hdr { - #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other - #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime - #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref --}; -+} __attribute__((packed, aligned(2))); - - - #define ICMPV6_ROUTER_PREF_LOW 0x3 ---- a/include/net/ndisc.h -+++ b/include/net/ndisc.h -@@ -76,7 +76,7 @@ struct ra_msg { - struct icmp6hdr icmph; - __be32 reachable_time; - __be32 retrans_timer; --}; -+} __attribute__((packed, aligned(2))); - - struct rd_msg { - struct icmp6hdr icmph; -@@ -148,10 +148,10 @@ static inline u32 ndisc_hashfn(const voi - { - const u32 *p32 = pkey; - -- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) + -- (p32[1] * hash_rnd[1]) + -- (p32[2] * hash_rnd[2]) + -- (p32[3] * hash_rnd[3])); -+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) + -+ (net_hdr_word(&p32[1]) * hash_rnd[1]) + -+ (net_hdr_word(&p32[2]) * hash_rnd[2]) + -+ (net_hdr_word(&p32[3]) * hash_rnd[3])); - } - - static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey) -@@ -168,8 +168,10 @@ static inline struct neighbour *__ipv6_n - n = rcu_dereference_bh(n->next)) { - u32 *n32 = (u32 *) n->primary_key; - if (n->dev == dev && -- ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | -- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0) -+ ((n32[0] ^ net_hdr_word(&p32[0])) | -+ (n32[1] ^ net_hdr_word(&p32[1])) | -+ (n32[2] ^ net_hdr_word(&p32[2])) | -+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0) - return n; - } - ---- a/net/sched/cls_u32.c -+++ b/net/sched/cls_u32.c -@@ -142,7 +142,7 @@ next_knode: - data = skb_header_pointer(skb, toff, 4, &hdata); - if (!data) - goto out; -- if ((*data ^ key->val) & key->mask) { -+ if ((net_hdr_word(data) ^ key->val) & key->mask) { - n = n->next; - goto next_knode; - } -@@ -193,8 +193,8 @@ check_terminal: - &hdata); - if (!data) - goto out; -- sel = ht->divisor & u32_hash_fold(*data, &n->sel, -- n->fshift); -+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data), -+ &n->sel, n->fshift); - } - if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT))) - goto next_ht; ---- a/net/ipv6/ip6_offload.c -+++ b/net/ipv6/ip6_offload.c -@@ -199,7 +199,7 @@ static struct sk_buff **ipv6_gro_receive - continue; - - iph2 = ipv6_hdr(p); -- first_word = *(__be32 *)iph ^ *(__be32 *)iph2 ; -+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2); - - /* All fields must match except length and Traffic Class. */ - if (nlen != skb_network_header_len(p) || ---- a/include/net/addrconf.h -+++ b/include/net/addrconf.h -@@ -43,7 +43,7 @@ struct prefix_info { - __be32 reserved2; - - struct in6_addr prefix; --}; -+} __attribute__((packed, aligned(2))); - - - #include <linux/netdevice.h> ---- a/include/net/inet_ecn.h -+++ b/include/net/inet_ecn.h -@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct - { - if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) - return 0; -- *(__be32*)iph |= htonl(INET_ECN_CE << 20); -+ net_hdr_word(iph) |= htonl(INET_ECN_CE << 20); - return 1; - } - - static inline void IP6_ECN_clear(struct ipv6hdr *iph) - { -- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20); -+ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20); - } - - static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner) ---- a/include/net/ipv6.h -+++ b/include/net/ipv6.h -@@ -107,7 +107,7 @@ struct frag_hdr { - __u8 reserved; - __be16 frag_off; - __be32 identification; --}; -+} __attribute__((packed, aligned(2))); - - #define IP6_MF 0x0001 - -@@ -386,8 +386,8 @@ static inline void __ipv6_addr_set_half( - } - #endif - #endif -- addr[0] = wh; -- addr[1] = wl; -+ net_hdr_word(&addr[0]) = wh; -+ net_hdr_word(&addr[1]) = wl; - } - - static inline void ipv6_addr_set(struct in6_addr *addr, -@@ -446,6 +446,8 @@ static inline bool ipv6_prefix_equal(con - const __be32 *a1 = addr1->s6_addr32; - const __be32 *a2 = addr2->s6_addr32; - unsigned int pdw, pbi; -+ /* Used for last <32-bit fraction of prefix */ -+ u32 pbia1, pbia2; - - /* check complete u32 in prefix */ - pdw = prefixlen >> 5; -@@ -454,7 +456,9 @@ static inline bool ipv6_prefix_equal(con - - /* check incomplete u32 in prefix */ - pbi = prefixlen & 0x1f; -- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi)))) -+ pbia1 = net_hdr_word(&a1[pdw]); -+ pbia2 = net_hdr_word(&a2[pdw]); -+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi)))) - return false; - - return true; -@@ -592,13 +596,13 @@ static inline void ipv6_addr_set_v4mappe - */ - static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) - { -- const __be32 *a1 = token1, *a2 = token2; -+ const struct in6_addr *a1 = token1, *a2 = token2; - int i; - - addrlen >>= 2; - - for (i = 0; i < addrlen; i++) { -- __be32 xb = a1[i] ^ a2[i]; -+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i]; - if (xb) - return i * 32 + 31 - __fls(ntohl(xb)); - } -@@ -660,12 +664,13 @@ static inline int ipv6_addr_diff(const s - static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, - __be32 flowlabel) - { -- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel; -+ net_hdr_word((__be32 *)hdr) = -+ htonl(0x60000000 | (tclass << 20)) | flowlabel; - } - - static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) - { -- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK; -+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK; - } - - /* ---- a/include/net/secure_seq.h -+++ b/include/net/secure_seq.h -@@ -2,6 +2,7 @@ - #define _NET_SECURE_SEQ - - #include <linux/types.h> -+#include <linux/in6.h> - - extern u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport); - extern u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, ---- a/include/uapi/linux/in.h -+++ b/include/uapi/linux/in.h -@@ -55,7 +55,7 @@ enum { - /* Internet address. */ - struct in_addr { - __be32 s_addr; --}; -+} __attribute__((packed, aligned(2))); - - #define IP_TOS 1 - #define IP_TTL 2 ---- a/net/core/secure_seq.c -+++ b/net/core/secure_seq.c -@@ -56,11 +56,12 @@ __u32 secure_tcpv6_sequence_number(const - u32 secret[MD5_MESSAGE_BYTES / 4]; - u32 hash[MD5_DIGEST_WORDS]; - u32 i; -+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; - - net_secret_init(); - memcpy(hash, saddr, 16); - for (i = 0; i < 4; i++) -- secret[i] = net_secret[i] + (__force u32)daddr[i]; -+ secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i]; - secret[4] = net_secret[4] + - (((__force u16)sport << 16) + (__force u16)dport); - for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) -@@ -78,11 +79,12 @@ u32 secure_ipv6_port_ephemeral(const __b - u32 secret[MD5_MESSAGE_BYTES / 4]; - u32 hash[MD5_DIGEST_WORDS]; - u32 i; -+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; - - net_secret_init(); - memcpy(hash, saddr, 16); - for (i = 0; i < 4; i++) -- secret[i] = net_secret[i] + (__force u32) daddr[i]; -+ secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i]; - secret[4] = net_secret[4] + (__force u32)dport; - for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) - secret[i] = net_secret[i]; -@@ -160,11 +162,12 @@ u64 secure_dccpv6_sequence_number(__be32 - u32 hash[MD5_DIGEST_WORDS]; - u64 seq; - u32 i; -+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; - - net_secret_init(); - memcpy(hash, saddr, 16); - for (i = 0; i < 4; i++) -- secret[i] = net_secret[i] + daddr[i]; -+ secret[i] = net_secret[i] + daddr6->s6_addr32[i]; - secret[4] = net_secret[4] + - (((__force u16)sport << 16) + (__force u16)dport); - for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) ---- a/net/ipv6/ip6_fib.c -+++ b/net/ipv6/ip6_fib.c -@@ -144,7 +144,7 @@ static __inline__ __be32 addr_bit_set(co - * See include/asm-generic/bitops/le.h. - */ - return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) & -- addr[fn_bit >> 5]; -+ net_hdr_word(&addr[fn_bit >> 5]); - } - - static __inline__ struct fib6_node * node_alloc(void) ---- a/net/netfilter/nf_conntrack_proto_tcp.c -+++ b/net/netfilter/nf_conntrack_proto_tcp.c -@@ -454,7 +454,7 @@ static void tcp_sack(const struct sk_buf - - /* Fast path for timestamp-only option */ - if (length == TCPOLEN_TSTAMP_ALIGNED -- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) -+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24) - | (TCPOPT_NOP << 16) - | (TCPOPT_TIMESTAMP << 8) - | TCPOLEN_TIMESTAMP)) ---- a/net/netfilter/xt_LOG.c -+++ b/net/netfilter/xt_LOG.c -@@ -528,9 +528,9 @@ static void dump_ipv6_packet(struct sbuf - /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */ - sb_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ", - ntohs(ih->payload_len) + sizeof(struct ipv6hdr), -- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20, -+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20, - ih->hop_limit, -- (ntohl(*(__be32 *)ih) & 0x000fffff)); -+ (ntohl(net_hdr_word(ih)) & 0x000fffff)); - - fragment = 0; - ptr = ip6hoff + sizeof(struct ipv6hdr); ---- a/net/xfrm/xfrm_input.c -+++ b/net/xfrm/xfrm_input.c -@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb, - if (!pskb_may_pull(skb, hlen)) - return -EINVAL; - -- *spi = *(__be32*)(skb_transport_header(skb) + offset); -- *seq = *(__be32*)(skb_transport_header(skb) + offset_seq); -+ *spi = net_hdr_word(skb_transport_header(skb) + offset); -+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq); - return 0; - } - ---- a/net/ipv4/ip_gre.c -+++ b/net/ipv4/ip_gre.c -@@ -190,13 +190,13 @@ static int parse_gre_header(struct sk_bu - } - - if (greh->flags & GRE_KEY) { -- tpi->key = *options; -+ tpi->key = net_hdr_word(options); - options++; - } else - tpi->key = 0; - - if (unlikely(greh->flags & GRE_SEQ)) { -- tpi->seq = *options; -+ tpi->seq = net_hdr_word(options); - options++; - } else - tpi->seq = 0; ---- a/net/ipv4/tcp_input.c -+++ b/net/ipv4/tcp_input.c -@@ -3624,14 +3624,16 @@ static bool tcp_parse_aligned_timestamp( - { - const __be32 *ptr = (const __be32 *)(th + 1); - -- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) -- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { -+ if (net_hdr_word(ptr) == -+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { - tp->rx_opt.saw_tstamp = 1; - ++ptr; -- tp->rx_opt.rcv_tsval = ntohl(*ptr); -+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr); - ++ptr; -- if (*ptr) -- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset; -+ if (net_hdr_word(ptr)) -+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) - -+ tp->tsoffset; - else - tp->rx_opt.rcv_tsecr = 0; - return true; ---- a/include/uapi/linux/if_pppox.h -+++ b/include/uapi/linux/if_pppox.h -@@ -47,6 +47,7 @@ struct pppoe_addr { - */ - struct pptp_addr { - __be16 call_id; -+ __u16 pad; - struct in_addr sin_addr; - }; - |