diff options
Diffstat (limited to 'target/linux/ar71xx')
-rw-r--r-- | target/linux/ar71xx/base-files/etc/defconfig/dir-825-b1/network (renamed from target/linux/ar71xx/base-files/etc/defconfig/dir825b1/network) | 0 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/diag.sh | 2 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/ar71xx.sh | 4 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 2 | ||||
-rw-r--r-- | target/linux/ar71xx/config-2.6.28 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/config-2.6.30 | 2 | ||||
-rw-r--r-- | target/linux/ar71xx/config-2.6.31 | 2 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig | 2 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/Makefile | 2 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c (renamed from target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c) | 65 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/prom.c | 4 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h | 2 | ||||
-rw-r--r-- | target/linux/ar71xx/image/Makefile | 2 |
13 files changed, 37 insertions, 53 deletions
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/dir825b1/network b/target/linux/ar71xx/base-files/etc/defconfig/dir-825-b1/network index 2d4d8e0..2d4d8e0 100644 --- a/target/linux/ar71xx/base-files/etc/defconfig/dir825b1/network +++ b/target/linux/ar71xx/base-files/etc/defconfig/dir-825-b1/network diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index c350f2c..9178b0a 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -42,7 +42,7 @@ get_status_led() { bullet-m | rocket-m | nano-m) status_led="ubnt:green:link4" ;; - dir825b1) + dir-825-b1) status_led="dir825b1:orange:power" ;; ls-sr71) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index ba4b0a2..1c2e060 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -19,8 +19,8 @@ ar71xx_board_name() { *AW-NR580) name="aw-nr580" ;; - *DIR825B1) - name="dir825b1" + *"DIR-825 rev. B1") + name="dir-825-b1" ;; *"Bullet M") name="bullet-m" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 90fa008..b7e003a 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -68,7 +68,7 @@ platform_check_image() { [ "$ARGC" -gt 1 ] && return 1 case "$board" in - ap83 | dir825b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m) + ap83 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m) [ "$magic" != "2705" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ar71xx/config-2.6.28 b/target/linux/ar71xx/config-2.6.28 index 3403790..b155259 100644 --- a/target/linux/ar71xx/config-2.6.28 +++ b/target/linux/ar71xx/config-2.6.28 @@ -7,6 +7,7 @@ CONFIG_AG71XX=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y CONFIG_AR71XX_MACH_AW_NR580=y +CONFIG_AR71XX_MACH_DIR_825_B1=y CONFIG_AR71XX_MACH_GENERIC=y CONFIG_AR71XX_MACH_MZK_W04NU=y CONFIG_AR71XX_MACH_MZK_W300NH=y diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30 index 07e2492..0db13af 100644 --- a/target/linux/ar71xx/config-2.6.30 +++ b/target/linux/ar71xx/config-2.6.30 @@ -6,7 +6,7 @@ CONFIG_AG71XX=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_DIR825B1=y +CONFIG_AR71XX_MACH_DIR_825_B1=y CONFIG_AR71XX_MACH_GENERIC=y CONFIG_AR71XX_MACH_MZK_W04NU=y CONFIG_AR71XX_MACH_MZK_W300NH=y diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31 index 554b002..2e4a56b 100644 --- a/target/linux/ar71xx/config-2.6.31 +++ b/target/linux/ar71xx/config-2.6.31 @@ -7,7 +7,7 @@ CONFIG_AG71XX=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_DIR825B1=y +CONFIG_AR71XX_MACH_DIR_825_B1=y CONFIG_AR71XX_MACH_GENERIC=y CONFIG_AR71XX_MACH_MZK_W04NU=y CONFIG_AR71XX_MACH_MZK_W300NH=y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index 37a0e01..c68115b 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -10,7 +10,7 @@ config AR71XX_MACH_AP83 bool "Atheros AP83 board support" default y -config AR71XX_MACH_DIR825B1 +config AR71XX_MACH_DIR_825_B1 bool "D-Link DIR-825 rev. B1 board support" default y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index d77438f..8e37c05 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o -obj-$(CONFIG_AR71XX_MACH_DIR825B1) += mach-dir825b1.o +obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c index dbf244c..ae95feb 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c @@ -16,18 +16,16 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/input.h> +#include <linux/pci.h> +#include <linux/ath9k_platform.h> +#include <linux/delay.h> #include <asm/mips_machine.h> #include <asm/mach-ar71xx/ar71xx.h> #include <asm/mach-ar71xx/pci.h> -#include <linux/pci.h> -#include <linux/ath9k_platform.h> -#include <linux/delay.h> - #include "devices.h" - #define DIR825B1_GPIO_LED_BLUE_USB 0 #define DIR825B1_GPIO_LED_ORANGE_POWER 1 #define DIR825B1_GPIO_LED_BLUE_POWER 2 @@ -40,20 +38,17 @@ #define DIR825B1_BUTTONS_POLL_INTERVAL 20 - -#define DIR825B1_CAL_LOCATION_0 0xbf661000 -#define DIR825B1_CAL_LOCATION_1 0xbf665000 +#define DIR825B1_CAL_LOCATION_0 0x1f661000 +#define DIR825B1_CAL_LOCATION_1 0x1f665000 #define DIR825B1_MAC_LOCATION_0 0x2ffa81b8 #define DIR825B1_MAC_LOCATION_1 0x2ffa8370 - static struct ath9k_platform_data dir825b1_wmac0_data; static struct ath9k_platform_data dir825b1_wmac1_data; static char dir825b1_wmac0_mac[6]; static char dir825b1_wmac1_mac[6]; - #ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition dir825b1_partitions[] = { { @@ -79,7 +74,6 @@ static struct mtd_partition dir825b1_partitions[] = { }; #endif /* CONFIG_MTD_PARTITIONS */ - static struct flash_platform_data dir825b1_flash_data = { #ifdef CONFIG_MTD_PARTITIONS .parts = dir825b1_partitions, @@ -87,7 +81,6 @@ static struct flash_platform_data dir825b1_flash_data = { #endif }; - static struct spi_board_info dir825b1_spi_info[] = { { .bus_num = 0, @@ -98,7 +91,6 @@ static struct spi_board_info dir825b1_spi_info[] = { } }; - static struct gpio_led dir825b1_leds_gpio[] __initdata = { { .name = "dir825b1:blue:usb", @@ -127,7 +119,6 @@ static struct gpio_led dir825b1_leds_gpio[] __initdata = { } }; - static struct gpio_button dir825b1_gpio_buttons[] __initdata = { { .desc = "reset", @@ -146,7 +137,6 @@ static struct gpio_button dir825b1_gpio_buttons[] __initdata = { } }; - #ifdef CONFIG_PCI static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = { { @@ -160,24 +150,21 @@ static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = { } }; - static int dir825b1_pci_plat_dev_init(struct pci_dev *dev) { - switch(PCI_SLOT(dev->devfn)) - { - case 17: - dev->dev.platform_data = &dir825b1_wmac0_data; - break; - - case 18: - dev->dev.platform_data = &dir825b1_wmac1_data; - break; + switch(PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &dir825b1_wmac0_data; + break; + + case 18: + dev->dev.platform_data = &dir825b1_wmac1_data; + break; } - return(0); + return 0; } - static void dir825b1_pci_fixup(struct pci_dev *dev) { void __iomem *mem; @@ -186,21 +173,20 @@ static void dir825b1_pci_fixup(struct pci_dev *dev) u32 bar0; u32 val; - if (ar71xx_mach != AR71XX_MACH_DIR825B1) return; + if (ar71xx_mach != AR71XX_MACH_DIR_825_B1) + return; dir825b1_pci_plat_dev_init(dev); cal_data = dev->dev.platform_data; - if (*cal_data != 0xa55a) - { + if (*cal_data != 0xa55a) { printk(KERN_ERR "PCI: no calibration data found for %s\n", pci_name(dev)); return; } mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); - if (!mem) - { + if (!mem) { printk(KERN_ERR "PCI: ioremap error for device %s\n", pci_name(dev)); return; @@ -218,12 +204,11 @@ static void dir825b1_pci_fixup(struct pci_dev *dev) /* set pointer to first reg address */ cal_data += 3; - while (*cal_data != 0xffff) - { + while (*cal_data != 0xffff) { u32 reg; reg = *cal_data++; val = *cal_data++; - val |= (*cal_data++) << 16; + val |= (*cal_data++) << 16; __raw_writel(val, mem + reg); udelay(100); @@ -248,8 +233,7 @@ static void dir825b1_pci_fixup(struct pci_dev *dev) DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, dir825b1_pci_fixup); - -static void __init dir825b1_pci_init(void) +static void __init dir825b1_pci_init(void) { memcpy(dir825b1_wmac0_data.eeprom_data, (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), @@ -271,7 +255,6 @@ static void __init dir825b1_pci_init(void) static void __init dir825b1_pci_init(void) { } #endif /* CONFIG_PCI */ - static void __init dir825b1_setup(void) { u8 mac[6], i; @@ -285,13 +268,13 @@ static void __init dir825b1_setup(void) ar71xx_add_device_mdio(0x0); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = 0x1E; + ar71xx_eth0_data.phy_mask = 0x1e; ar71xx_eth0_data.speed = SPEED_1000; ar71xx_eth0_data.duplex = DUPLEX_FULL; ar71xx_eth0_pll_data.pll_1000 = 0x11110000; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0xC0; + ar71xx_eth1_data.phy_mask = 0xc0; ar71xx_eth1_data.speed = SPEED_1000; ar71xx_eth1_data.duplex = DUPLEX_FULL; ar71xx_eth1_pll_data.pll_1000 = 0x11110000; @@ -314,4 +297,4 @@ static void __init dir825b1_setup(void) dir825b1_pci_init(); } -MIPS_MACHINE(AR71XX_MACH_DIR825B1, "D-Link DIR825B1", dir825b1_setup); +MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "D-Link DIR-825 rev. B1", dir825b1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c index ec7eed8..cc0d5ae 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c @@ -59,8 +59,8 @@ static struct board_rec boards[] __initdata = { .name = "AW-NR580", .mach_type = AR71XX_MACH_AW_NR580, }, { - .name = "DIR825B1", - .mach_type = AR71XX_MACH_DIR825B1, + .name = "DIR-825-B1", + .mach_type = AR71XX_MACH_DIR_825_B1, }, { .name = "TEW-632BRP", .mach_type = AR71XX_MACH_TEW_632BRP, diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h index f26fc85..7f61c14 100644 --- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h +++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h @@ -124,7 +124,7 @@ enum ar71xx_mach_type { AR71XX_MACH_AP81, /* Atheros AP81 */ AR71XX_MACH_AP83, /* Atheros AP83 */ AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ - AR71XX_MACH_DIR825B1, /* D-Link DIR-825 rev. B1 */ + AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 8a5dbe6..da2f8fd 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -483,7 +483,7 @@ define Image/Build/Profile/WRT400N endef define Image/Build/Profile/DIR825B1 - $(call Image/Build/Template/DIR825B1/$(1),dir825b1,board=DIR825B1) + $(call Image/Build/Template/DIR825B1/$(1),dir-825-b1,board=DIR-825-B1) endef define Image/Build/Profile/WRT160NL |