diff options
Diffstat (limited to 'target/linux/arc770/dts/axs10x_mb.dtsi')
| -rw-r--r-- | target/linux/arc770/dts/axs10x_mb.dtsi | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/target/linux/arc770/dts/axs10x_mb.dtsi b/target/linux/arc770/dts/axs10x_mb.dtsi new file mode 100644 index 0000000..f3db321 --- /dev/null +++ b/target/linux/arc770/dts/axs10x_mb.dtsi @@ -0,0 +1,224 @@ +/* + * Support for peripherals on the AXS10x mainboard + * + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + axs10x_mb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0xe0000000 0x10000000>; + interrupt-parent = <&mb_intc>; + + clocks { + i2cclk: i2cclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + apbclk: apbclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk: mmcclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + }; + + ethernet@0x18000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = < 0x18000 0x2000 >; + interrupts = < 4 >; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + snps,pbl = < 32 >; + clocks = <&apbclk>; + clock-names = "stmmaceth"; + }; + + ehci@0x40000 { + compatible = "generic-ehci"; + reg = < 0x40000 0x100 >; + interrupts = < 8 >; + }; + + ohci@0x60000 { + compatible = "generic-ohci"; + reg = < 0x60000 0x100 >; + interrupts = < 8 >; + }; + + /* + * According to DW Mobile Storage databook it is required + * to use "Hold Register" if card is enumerated in SDR12 or + * SDR25 modes. + * + * Utilization of "Hold Register" is already implemented via + * dw_mci_pltfm_prepare_command() which in its turn gets + * used through dw_mci_drv_data->prepare_command call-back. + * This call-back is used in Altera Socfpga platform and so + * we may reuse it saying that we're compatible with their + * "altr,socfpga-dw-mshc". + * + * Most probably "Hold Register" utilization is platform- + * independent requirement which means that single unified + * "snps,dw-mshc" should be enough for all users of DW MMC once + * dw_mci_pltfm_prepare_command() is used in generic platform + * code. + */ + mmc@0x15000 { + compatible = "altr,socfpga-dw-mshc"; + reg = < 0x15000 0x400 >; + num-slots = < 1 >; + fifo-depth = < 16 >; + card-detect-delay = < 200 >; + clocks = <&apbclk>, <&mmcclk>; + clock-names = "biu", "ciu"; + interrupts = < 7 >; + bus-width = < 4 >; + }; + + uart@0x20000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20000 0x100>; + clock-frequency = <33333333>; + interrupts = <17>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@0x21000 { + compatible = "snps,dw-apb-uart"; + reg = <0x21000 0x100>; + clock-frequency = <33333333>; + interrupts = <18>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + /* UART muxed with USB data port (ttyS3) */ + uart@0x22000 { + compatible = "snps,dw-apb-uart"; + reg = <0x22000 0x100>; + clock-frequency = <33333333>; + interrupts = <19>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + i2c@0x1d000 { + compatible = "snps,designware-i2c"; + reg = <0x1d000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <14>; + }; + + i2c@0x1e000 { + compatible = "snps,designware-i2c"; + reg = <0x1e000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <15>; + }; + + i2c@0x1f000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1f000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <16>; + + eeprom@0x54{ + compatible = "24c01"; + reg = <0x54>; + pagesize = <0x8>; + }; + + eeprom@0x57{ + compatible = "24c04"; + reg = <0x57>; + pagesize = <0x8>; + }; + }; + + gpio0:gpio@13000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x13000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio0_banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + + gpio0_bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <1>; + }; + + gpio0_bankc: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <2>; + }; + }; + + gpio1:gpio@14000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x14000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio1_banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + }; + + gpio1_bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <10>; + reg = <1>; + }; + + gpio1_bankc: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <2>; + }; + }; + }; +}; |