summaryrefslogtreecommitdiff
path: root/target/linux/at91/files
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/at91/files')
-rw-r--r--target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts125
-rw-r--r--target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c219
-rw-r--r--target/linux/at91/files/drivers/mtd/at91part.c122
3 files changed, 0 insertions, 466 deletions
diff --git a/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts b/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts
deleted file mode 100644
index 671f452..0000000
--- a/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * lmu5000.dst - Device Tree file for CalAmp LMU5000 board
- *
- * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-/include/ "at91sam9g20.dtsi"
-
-/ {
- model = "CalAmp LMU5000";
- compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
-
- chosen {
- bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
- };
-
- memory {
- reg = <0x20000000 0x4000000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
- };
-
- ahb {
- apb {
- pinctrl@fffff400 {
- board {
- pinctrl_pck0_as_mck: pck0_as_mck {
- atmel,pins =
- <2 1 0x2 0x0>; /* PC1 periph B */
- };
-
- };
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- usart0: serial@fffb0000 {
- pinctrl-0 =
- <&pinctrl_usart0
- &pinctrl_usart0_rts
- &pinctrl_usart0_cts
- &pinctrl_usart0_dtr_dsr
- &pinctrl_usart0_dcd
- &pinctrl_usart0_ri>;
- status = "okay";
- };
-
- usart2: serial@fffb8000 {
- status = "okay";
- };
-
- uart0: serial@fffd4000 {
- status = "okay";
- };
-
- uart1: serial@fffd8000 {
- status = "okay";
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "mii";
- status = "okay";
- };
-
- usb1: gadget@fffa4000 {
- atmel,vbus-gpio = <&pioC 5 0>;
- status = "okay";
- };
-
- ssc0: ssc@fffbc000 {
- status = "okay";
- pinctrl-0 = <&pinctrl_ssc0_tx>;
- };
-
- watchdog@fffffd40 {
- status = "okay";
- };
- };
-
- nand0: nand@40000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- nand-on-flash-bbt;
- status = "okay";
-
- kernel@0 {
- label = "kernel";
- reg = <0x0 0x400000>;
- };
-
- rootfs@400000 {
- label = "rootfs";
- reg = <0x400000 0x3C00000>;
- };
-
- user1@4000000 {
- label = "user1";
- reg = <0x4000000 0x2000000>;
- };
-
- user2@6000000 {
- label = "user2";
- reg = <0x6000000 0x2000000>;
- };
- };
-
- usb0: ohci@00500000 {
- num-ports = <2>;
- status = "okay";
- };
- };
-};
diff --git a/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c b/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c
deleted file mode 100644
index cae1fe9..0000000
--- a/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * Copyright (C) 2008 I2SE GmbH
- * Copyright (C) 2010 IEQualize GmbH
- * Copyright (C) 2010-2011 Michael Heimpold
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include <video/atmel_lcdc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-#include <linux/atmel_serial.h>
-
-
-static void __init tqma9263_map_io(void)
-{
- unsigned pins;
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 */
- pins = ATMEL_UART_CTS | ATMEL_UART_RTS |
- ATMEL_UART_DSR | ATMEL_UART_DTR |
- ATMEL_UART_DCD | ATMEL_UART_RI;
- at91_register_uart(AT91SAM9263_ID_US0, 1, pins);
-
- /* USART1 on ttyS2 */
- pins = ATMEL_UART_RTS;
- at91_register_uart(AT91SAM9263_ID_US1, 2, pins);
-
- /* USART2 on ttyS3 */
- pins = ATMEL_UART_RTS;
- at91_register_uart(AT91SAM9263_ID_US2, 3, pins);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata tqma9263_usbh_data = {
- .ports = 2,
- .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
- .vbus_pin_active_low = 0,
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata tqma9263_udc_data = {
- .vbus_pin = AT91_PIN_PA25,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata tqma9263_mmc_data = {
- .wire4 = 1,
- .det_pin = AT91_PIN_PE18,
- .wp_pin = AT91_PIN_PB28,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata tqma9263_macb_data = {
- .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
-};
-
-
-/*
- * I2C devices
- */
-static struct i2c_board_info __initdata tqma9263_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
- {
- I2C_BOARD_INFO("24c04", 0x52),
- },
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata tqma9263_nand_partition[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 3 * SZ_128K,
- },
- {
- .name = "uboot-env",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_128K,
- },
- {
- .name = "linux",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_2M,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(tqma9263_nand_partition);
- return tqma9263_nand_partition;
-}
-
-static struct atmel_nand_data __initdata tqma9263_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PD14,
- .enable_pin = AT91_PIN_PD15,
-};
-
-static struct sam9_smc_config __initdata tqma9263_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init tqma9263_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &tqma9263_nand_smc_config);
-
- at91_add_device_nand(&tqma9263_nand_data);
-}
-
-
-static void __init tqma9263_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&tqma9263_usbh_data);
- /* USB Device */
- at91_add_device_udc(&tqma9263_udc_data);
- /* MMC */
- at91_add_device_mmc(1, &tqma9263_mmc_data);
- /* I2C */
- at91_add_device_i2c(tqma9263_i2c_devices, ARRAY_SIZE(tqma9263_i2c_devices));
- /* Ethernet */
- at91_add_device_eth(&tqma9263_macb_data);
- /* NAND flash */
- tqma9263_add_device_nand();
-}
-
-MACHINE_START(TQMA9263, "TQ Components TQMa9263")
- /* Maintainer: Michael Heimpold */
- .timer = &at91sam926x_timer,
- .map_io = tqma9263_map_io,
- .init_irq = at91_init_irq_default,
- .init_machine = tqma9263_board_init,
-MACHINE_END
diff --git a/target/linux/at91/files/drivers/mtd/at91part.c b/target/linux/at91/files/drivers/mtd/at91part.c
deleted file mode 100644
index 31f3bbd..0000000
--- a/target/linux/at91/files/drivers/mtd/at91part.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- *
- * Copyright (C) 2007 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Atmel AT91 flash partition table. (Modified by Hamish Guthrie).
- * Based on ar7 map by Felix Fietkau.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/bootmem.h>
-#include <linux/squashfs_fs.h>
-
-static struct mtd_partition at91_parts[6];
-
-static int create_mtd_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long origin)
-{
- unsigned int offset, len;
- unsigned int pre_size = 0x42000, root_max = 0x362400;
- unsigned char buf[512];
- struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
-
- printk("Parsing AT91 partition map...\n");
-
- at91_parts[0].name = "loaders";
- at91_parts[0].offset = 0;
- at91_parts[0].size = 0x21000;
- at91_parts[0].mask_flags = MTD_WRITEABLE;
-
- at91_parts[1].name = "ubparams";
- at91_parts[1].offset = 0x21000;
- at91_parts[1].size = 0x8400;
- at91_parts[1].mask_flags = 0;
-
- at91_parts[2].name = "kernel";
- at91_parts[2].offset = pre_size;
- at91_parts[2].size = 0;
- at91_parts[2].mask_flags = 0;
-
- at91_parts[3].name = "rootfs";
- at91_parts[3].offset = 0;
- at91_parts[3].size = 0;
- at91_parts[3].mask_flags = 0;
-
- for(offset = pre_size; offset < root_max; offset += master->erasesize) {
-
- memset(&buf, 0xe5, sizeof(buf));
-
- if (master->read(master, offset, sizeof(buf), &len, buf) || len != sizeof(buf))
- break;
-
- if (*((__u32 *) buf) == SQUASHFS_MAGIC) {
- printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n",
- master->name, (u32) sb->bytes_used);
-
- at91_parts[3].size = sb->bytes_used;
- at91_parts[3].offset = offset;
- len = at91_parts[3].offset + at91_parts[3].size;
- len = ((len / (master->erasesize * 8)) + 1) * master->erasesize * 8;
- at91_parts[3].size = len - at91_parts[3].offset;
- at91_parts[2].size = offset - at91_parts[2].offset;
- break;
- }
- }
-
- if (at91_parts[3].size == 0) {
- printk(KERN_NOTICE "%s: Couldn't find root filesystem\n", master->name);
- return -1;
- }
-
- at91_parts[4].name = "rootfs_data";
- at91_parts[4].offset = root_max;
- at91_parts[4].size = master->size - root_max;
- at91_parts[4].mask_flags = 0;
-
- at91_parts[5].name = "complete";
- at91_parts[5].offset = 0;
- at91_parts[5].size = master->size;
- at91_parts[5].mask_flags = 0;
-
- *pparts = at91_parts;
- return 6;
-}
-
-static struct mtd_part_parser at91_parser = {
- .owner = THIS_MODULE,
- .parse_fn = create_mtd_partitions,
- .name = "at91part",
-};
-
-static int __init at91_parser_init(void)
-{
- register_mtd_parser(&at91_parser);
-
- return 0;
-}
-
-module_init(at91_parser_init);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Felix Fietkau, Eugene Konev, Hamish Guthrie");
-MODULE_DESCRIPTION("MTD partitioning for Atmel at91");