diff options
Diffstat (limited to 'target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch')
| -rw-r--r-- | target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch b/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch deleted file mode 100644 index c604710..0000000 --- a/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch +++ /dev/null @@ -1,36 +0,0 @@ -Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c -=================================================================== ---- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c -+++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c -@@ -618,7 +618,6 @@ void __init at91_init_leds(u8 cpu_led, u - - - #if defined(CONFIG_NEW_LEDS) -- - static struct platform_device at91_leds = { - .name = "at91_leds", - .id = -1, -@@ -724,6 +723,10 @@ static inline void configure_usart0_pins - * We need to drive the pin manually. Default is off (RTS is active low). - */ - at91_set_gpio_output(AT91_PIN_PA21, 1); -+ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */ -+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */ -+ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */ -+ at91_set_deglitch(AT91_PIN_PA19, 1); - } - - static struct resource uart1_resources[] = { -@@ -835,6 +838,12 @@ static inline void configure_usart3_pins - { - at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ - at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ -+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ -+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ -+ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */ -+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */ -+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */ -+ at91_set_deglitch(AT91_PIN_PA24, 1); - } - - struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ |