diff options
Diffstat (limited to 'target/linux/at91/patches-2.6.25/000-at91patches.patch')
| -rw-r--r-- | target/linux/at91/patches-2.6.25/000-at91patches.patch | 430 |
1 files changed, 215 insertions, 215 deletions
diff --git a/target/linux/at91/patches-2.6.25/000-at91patches.patch b/target/linux/at91/patches-2.6.25/000-at91patches.patch index 74962b2..06c2935 100644 --- a/target/linux/at91/patches-2.6.25/000-at91patches.patch +++ b/target/linux/at91/patches-2.6.25/000-at91patches.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig -@@ -12,18 +12,28 @@ +@@ -12,18 +12,28 @@ config ARCH_AT91RM9200 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" @@ -29,7 +29,7 @@ config ARCH_AT91X40 bool "AT91x40" -@@ -45,7 +55,7 @@ +@@ -45,7 +55,7 @@ config MACH_ONEARM depends on ARCH_AT91RM9200 help Select this if you are using Ajeco's 1ARM Single Board Computer. @@ -38,7 +38,7 @@ config ARCH_AT91RM9200DK bool "Atmel AT91RM9200-DK Development board" -@@ -94,7 +104,7 @@ +@@ -94,7 +104,7 @@ config MACH_KB9200 depends on ARCH_AT91RM9200 help Select this if you are using KwikByte's KB920x board. @@ -47,7 +47,7 @@ config MACH_PICOTUX2XX bool "picotux 200" -@@ -109,6 +119,38 @@ +@@ -109,6 +119,38 @@ config MACH_KAFA help Select this if you are using Sperry-Sun's KAFA board. @@ -86,7 +86,7 @@ endif # ---------------------------------------------------------- -@@ -133,6 +175,34 @@ +@@ -133,6 +175,34 @@ config MACH_AT91SAM9260EK Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> @@ -121,7 +121,7 @@ endif # ---------------------------------------------------------- -@@ -163,6 +233,13 @@ +@@ -163,6 +233,13 @@ config MACH_AT91SAM9263EK Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> @@ -135,7 +135,7 @@ endif # ---------------------------------------------------------- -@@ -216,7 +293,7 @@ +@@ -216,7 +293,7 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" @@ -144,7 +144,7 @@ help Enable support for the DataFlash card. -@@ -237,6 +314,19 @@ +@@ -237,6 +314,19 @@ config AT91_PROGRAMMABLE_CLOCKS Select this if you need to program one or more of the PCK0..PCK3 programmable clock outputs. @@ -166,7 +166,7 @@ range 32 1024 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile -@@ -28,16 +28,26 @@ +@@ -28,16 +28,26 @@ obj-$(CONFIG_MACH_CARMEVA) += board-carm obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o @@ -193,7 +193,7 @@ # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o -@@ -50,9 +60,11 @@ +@@ -50,9 +60,11 @@ obj-$(CONFIG_MACH_AT91EB01) += board-eb0 # Drivers obj-y += leds.o @@ -223,7 +223,7 @@ #include "generic.h" #include "clock.h" -@@ -288,6 +291,12 @@ +@@ -288,6 +291,12 @@ static void at91cap9_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -236,7 +236,7 @@ /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -@@ -298,6 +307,7 @@ +@@ -298,6 +307,7 @@ void __init at91cap9_initialize(unsigned iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); at91_arch_reset = at91cap9_reset; @@ -244,7 +244,7 @@ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Init clock subsystem */ -@@ -308,6 +318,12 @@ +@@ -308,6 +318,12 @@ void __init at91cap9_initialize(unsigned /* Register GPIO subsystem */ at91_gpio_init(at91cap9_gpio, 4); @@ -282,7 +282,7 @@ #include "generic.h" -@@ -69,6 +71,9 @@ +@@ -69,6 +71,9 @@ void __init at91_add_device_usbh(struct if (!data) return; @@ -292,7 +292,7 @@ /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (data->vbus_pin[i]) -@@ -84,6 +89,110 @@ +@@ -84,6 +89,110 @@ void __init at91_add_device_usbh(struct /* -------------------------------------------------------------------- @@ -403,7 +403,7 @@ * Ethernet * -------------------------------------------------------------------- */ -@@ -246,7 +355,7 @@ +@@ -246,7 +355,7 @@ void __init at91_add_device_mmc(short mm } mmc0_data = *data; @@ -412,7 +412,7 @@ platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ -@@ -283,10 +392,15 @@ +@@ -283,10 +392,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { @@ -429,7 +429,7 @@ } }; -@@ -344,6 +458,7 @@ +@@ -344,6 +458,7 @@ void __init at91_add_device_nand(struct void __init at91_add_device_nand(struct at91_nand_data *data) {} #endif @@ -437,7 +437,7 @@ /* -------------------------------------------------------------------- * TWI (i2c) * -------------------------------------------------------------------- */ -@@ -532,17 +647,64 @@ +@@ -532,17 +647,64 @@ void __init at91_add_device_spi(struct s /* -------------------------------------------------------------------- @@ -504,7 +504,7 @@ platform_device_register(&at91cap9_rtt_device); } -@@ -660,6 +822,9 @@ +@@ -660,6 +822,9 @@ void __init at91_add_device_lcdc(struct if (!data) return; @@ -514,7 +514,7 @@ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ -@@ -990,7 +1155,7 @@ +@@ -990,7 +1155,7 @@ static inline void configure_usart2_pins at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } @@ -523,7 +523,7 @@ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -@@ -1031,8 +1196,6 @@ +@@ -1031,8 +1196,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -532,7 +532,7 @@ } void __init at91_add_device_serial(void) -@@ -1043,6 +1206,9 @@ +@@ -1043,6 +1206,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -542,7 +542,7 @@ } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -@@ -1060,6 +1226,7 @@ +@@ -1060,6 +1226,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtt(); at91_add_device_watchdog(); @@ -552,7 +552,7 @@ --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c -@@ -513,7 +513,18 @@ +@@ -513,7 +513,18 @@ void __init at91_add_device_i2c(struct i * SPI * -------------------------------------------------------------------- */ @@ -572,7 +572,7 @@ static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi_resources[] = { -@@ -530,7 +541,7 @@ +@@ -530,7 +541,7 @@ static struct resource spi_resources[] = }; static struct platform_device at91rm9200_spi_device = { @@ -581,7 +581,7 @@ .id = 0, .dev = { .dma_mask = &spi_dmamask, -@@ -563,6 +574,12 @@ +@@ -563,6 +574,12 @@ void __init at91_add_device_spi(struct s else at91_set_gpio_output(cs_pin, 1); @@ -594,7 +594,7 @@ /* pass chip-select pin to driver */ devices[i].controller_data = (void *) cs_pin; -@@ -577,6 +594,90 @@ +@@ -577,6 +594,90 @@ void __init at91_add_device_spi(struct s /* -------------------------------------------------------------------- @@ -685,7 +685,7 @@ * RTC * -------------------------------------------------------------------- */ -@@ -589,6 +690,7 @@ +@@ -589,6 +690,7 @@ static struct platform_device at91rm9200 static void __init at91_add_device_rtc(void) { @@ -693,7 +693,7 @@ platform_device_register(&at91rm9200_rtc_device); } #else -@@ -1019,7 +1121,7 @@ +@@ -1019,7 +1121,7 @@ static inline void configure_usart3_pins at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ } @@ -702,7 +702,7 @@ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -1110,8 +1212,6 @@ +@@ -1110,8 +1212,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -711,7 +711,7 @@ } void __init at91_add_device_serial(void) -@@ -1122,6 +1222,9 @@ +@@ -1122,6 +1222,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -721,7 +721,7 @@ } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -@@ -1141,6 +1244,7 @@ +@@ -1141,6 +1244,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtc(); at91_add_device_watchdog(); @@ -731,7 +731,7 @@ --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c -@@ -136,8 +136,6 @@ +@@ -136,8 +136,6 @@ clkevt32k_next_event(unsigned long delta u32 alm; int status = 0; @@ -758,7 +758,7 @@ #include "generic.h" #include "clock.h" -@@ -267,6 +269,11 @@ +@@ -267,6 +269,11 @@ static void at91sam9260_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -770,7 +770,7 @@ /* -------------------------------------------------------------------- * AT91SAM9260 processor initialization -@@ -304,6 +311,7 @@ +@@ -304,6 +311,7 @@ void __init at91sam9260_initialize(unsig iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); at91_arch_reset = at91sam9260_reset; @@ -790,7 +790,7 @@ #include "generic.h" -@@ -288,10 +288,15 @@ +@@ -288,10 +288,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { @@ -807,7 +807,7 @@ } }; -@@ -540,6 +545,90 @@ +@@ -540,6 +545,90 @@ void __init at91_add_device_spi(struct s /* -------------------------------------------------------------------- @@ -898,7 +898,7 @@ * RTT * -------------------------------------------------------------------- */ -@@ -553,13 +642,14 @@ +@@ -553,13 +642,14 @@ static struct resource rtt_resources[] = static struct platform_device at91sam9260_rtt_device = { .name = "at91_rtt", @@ -914,7 +914,7 @@ platform_device_register(&at91sam9260_rtt_device); } -@@ -962,7 +1052,7 @@ +@@ -962,7 +1052,7 @@ static inline void configure_usart5_pins at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ } @@ -923,7 +923,7 @@ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -1073,8 +1163,6 @@ +@@ -1073,8 +1163,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -932,7 +932,7 @@ } void __init at91_add_device_serial(void) -@@ -1085,6 +1173,9 @@ +@@ -1085,6 +1173,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -942,7 +942,7 @@ } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -@@ -1103,6 +1194,7 @@ +@@ -1103,6 +1194,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtt(); at91_add_device_watchdog(); @@ -967,7 +967,7 @@ #include "generic.h" #include "clock.h" -@@ -245,6 +247,11 @@ +@@ -245,6 +247,11 @@ static void at91sam9261_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -979,7 +979,7 @@ /* -------------------------------------------------------------------- * AT91SAM9261 processor initialization -@@ -256,6 +263,7 @@ +@@ -256,6 +263,7 @@ void __init at91sam9261_initialize(unsig iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); at91_arch_reset = at91sam9261_reset; @@ -998,7 +998,7 @@ #include "generic.h" -@@ -548,6 +548,55 @@ +@@ -548,6 +548,55 @@ void __init at91_add_device_lcdc(struct /* -------------------------------------------------------------------- @@ -1054,7 +1054,7 @@ * RTT * -------------------------------------------------------------------- */ -@@ -561,13 +610,14 @@ +@@ -561,13 +610,14 @@ static struct resource rtt_resources[] = static struct platform_device at91sam9261_rtt_device = { .name = "at91_rtt", @@ -1070,7 +1070,7 @@ platform_device_register(&at91sam9261_rtt_device); } -@@ -938,7 +988,7 @@ +@@ -938,7 +988,7 @@ static inline void configure_usart2_pins at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ } @@ -1079,7 +1079,7 @@ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -1019,8 +1069,6 @@ +@@ -1019,8 +1069,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -1088,7 +1088,7 @@ } void __init at91_add_device_serial(void) -@@ -1031,6 +1079,9 @@ +@@ -1031,6 +1079,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -1098,7 +1098,7 @@ } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -@@ -1050,6 +1101,7 @@ +@@ -1050,6 +1101,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtt(); at91_add_device_watchdog(); @@ -1123,7 +1123,7 @@ #include "generic.h" #include "clock.h" -@@ -271,6 +273,11 @@ +@@ -271,6 +273,11 @@ static void at91sam9263_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -1135,7 +1135,7 @@ /* -------------------------------------------------------------------- * AT91SAM9263 processor initialization -@@ -282,6 +289,7 @@ +@@ -282,6 +289,7 @@ void __init at91sam9263_initialize(unsig iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); at91_arch_reset = at91sam9263_reset; @@ -1155,7 +1155,7 @@ #include "generic.h" -@@ -308,7 +308,7 @@ +@@ -308,7 +308,7 @@ void __init at91_add_device_mmc(short mm } mmc0_data = *data; @@ -1164,7 +1164,7 @@ platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ -@@ -358,10 +358,15 @@ +@@ -358,10 +358,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { @@ -1181,7 +1181,7 @@ } }; -@@ -783,6 +788,43 @@ +@@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {} /* -------------------------------------------------------------------- @@ -1225,7 +1225,7 @@ * RTT * -------------------------------------------------------------------- */ -@@ -818,7 +860,9 @@ +@@ -818,7 +860,9 @@ static struct platform_device at91sam926 static void __init at91_add_device_rtt(void) { @@ -1235,7 +1235,7 @@ platform_device_register(&at91sam9263_rtt1_device); } -@@ -933,9 +977,6 @@ +@@ -933,9 +977,6 @@ static inline void configure_ssc1_pins(u } /* @@ -1245,7 +1245,7 @@ * SSC controllers are accessed through library code, instead of any * kind of all-singing/all-dancing driver. For example one could be * used by a particular I2S audio codec's driver, while another one -@@ -1146,7 +1187,7 @@ +@@ -1146,7 +1187,7 @@ static inline void configure_usart2_pins at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } @@ -1254,7 +1254,7 @@ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -1227,8 +1268,6 @@ +@@ -1227,8 +1268,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -1263,7 +1263,7 @@ } void __init at91_add_device_serial(void) -@@ -1239,9 +1278,12 @@ +@@ -1239,9 +1278,12 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -1277,7 +1277,7 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} -@@ -1257,6 +1299,7 @@ +@@ -1257,6 +1299,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtt(); at91_add_device_watchdog(); @@ -1539,7 +1539,7 @@ #include "generic.h" #include "clock.h" -@@ -244,6 +246,11 @@ +@@ -244,6 +246,11 @@ static void at91sam9rl_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -1551,7 +1551,7 @@ /* -------------------------------------------------------------------- * AT91SAM9RL processor initialization -@@ -274,6 +281,7 @@ +@@ -274,6 +281,7 @@ void __init at91sam9rl_initialize(unsign iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); at91_arch_reset = at91sam9rl_reset; @@ -1670,7 +1670,7 @@ * MMC / SD * -------------------------------------------------------------------- */ -@@ -105,10 +200,15 @@ +@@ -105,10 +200,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { @@ -1687,7 +1687,7 @@ } }; -@@ -385,6 +485,100 @@ +@@ -385,6 +485,100 @@ void __init at91_add_device_lcdc(struct /* -------------------------------------------------------------------- @@ -1788,7 +1788,7 @@ * RTC * -------------------------------------------------------------------- */ -@@ -397,6 +591,7 @@ +@@ -397,6 +591,7 @@ static struct platform_device at91sam9rl static void __init at91_add_device_rtc(void) { @@ -1796,7 +1796,7 @@ platform_device_register(&at91sam9rl_rtc_device); } #else -@@ -418,13 +613,14 @@ +@@ -418,13 +613,14 @@ static struct resource rtt_resources[] = static struct platform_device at91sam9rl_rtt_device = { .name = "at91_rtt", @@ -1812,7 +1812,7 @@ platform_device_register(&at91sam9rl_rtt_device); } -@@ -539,9 +735,6 @@ +@@ -539,9 +735,6 @@ static inline void configure_ssc1_pins(u } /* @@ -1822,7 +1822,7 @@ * SSC controllers are accessed through library code, instead of any * kind of all-singing/all-dancing driver. For example one could be * used by a particular I2S audio codec's driver, while another one -@@ -802,7 +995,7 @@ +@@ -802,7 +995,7 @@ static inline void configure_usart3_pins at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ } @@ -1831,7 +1831,7 @@ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -893,8 +1086,6 @@ +@@ -893,8 +1086,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -1840,7 +1840,7 @@ } void __init at91_add_device_serial(void) -@@ -905,6 +1096,9 @@ +@@ -905,6 +1096,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -1850,7 +1850,7 @@ } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -@@ -925,6 +1119,7 @@ +@@ -925,6 +1119,7 @@ static int __init at91_add_standard_devi at91_add_device_rtc(); at91_add_device_rtt(); at91_add_device_watchdog(); @@ -2061,7 +2061,7 @@ #include "generic.h" -@@ -78,6 +76,12 @@ +@@ -78,6 +76,12 @@ static struct at91_usbh_data __initdata .ports = 2, }; @@ -2074,7 +2074,7 @@ /* * ADS7846 Touchscreen -@@ -130,7 +134,7 @@ +@@ -130,7 +134,7 @@ static struct spi_board_info cap9adk_spi { .modalias = "ads7846", .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ @@ -2083,7 +2083,7 @@ .bus_num = 0, .platform_data = &ads_info, .irq = AT91_PIN_PC4, -@@ -324,8 +328,9 @@ +@@ -324,8 +328,9 @@ static void __init cap9adk_board_init(vo /* Serial */ at91_add_device_serial(); /* USB Host */ @@ -2094,7 +2094,7 @@ /* SPI */ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); /* Touchscreen */ -@@ -341,7 +346,6 @@ +@@ -341,7 +346,6 @@ static void __init cap9adk_board_init(vo /* I2C */ at91_add_device_i2c(NULL, 0); /* LCD Controller */ @@ -2139,7 +2139,7 @@ } static void __init carmeva_init_irq(void) -@@ -117,6 +114,30 @@ +@@ -117,6 +114,30 @@ static struct spi_board_info carmeva_spi }, }; @@ -2170,7 +2170,7 @@ static void __init carmeva_board_init(void) { /* Serial */ -@@ -135,6 +156,8 @@ +@@ -135,6 +156,8 @@ static void __init carmeva_board_init(vo // at91_add_device_cf(&carmeva_cf_data); /* MMC */ at91_add_device_mmc(0, &carmeva_mmc_data); @@ -2316,7 +2316,7 @@ +MACHINE_END --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c -@@ -61,6 +61,7 @@ +@@ -61,6 +61,7 @@ static void __init csb337_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -2324,7 +2324,7 @@ /* Setup the serial ports and console */ at91_init_serial(&csb337_uart_config); -@@ -202,11 +203,11 @@ +@@ -202,11 +203,11 @@ static struct platform_device csb300_but static void __init csb300_add_device_buttons(void) { @@ -2339,7 +2339,7 @@ at91_set_deglitch(AT91_PIN_PA21, 1); platform_device_register(&csb300_button_device); -@@ -233,7 +234,7 @@ +@@ -233,7 +234,7 @@ static struct gpio_led csb_leds[] = { .gpio = AT91_PIN_PB0, .active_low = 1, .default_trigger = "ide-disk", @@ -2382,7 +2382,7 @@ } static void __init csb637_init_irq(void) -@@ -118,8 +107,19 @@ +@@ -118,8 +107,19 @@ static struct platform_device csb_flash .num_resources = ARRAY_SIZE(csb_flash_resources), }; @@ -2430,7 +2430,7 @@ static void __init dk_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ -@@ -64,8 +54,16 @@ +@@ -64,8 +54,16 @@ static void __init dk_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -2449,7 +2449,7 @@ } static void __init dk_init_irq(void) -@@ -73,6 +71,185 @@ +@@ -73,6 +71,185 @@ static void __init dk_init_irq(void) at91rm9200_init_interrupts(NULL); } @@ -2635,7 +2635,7 @@ static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, -@@ -164,7 +341,7 @@ +@@ -164,7 +341,7 @@ static struct at91_nand_data __initdata #define DK_FLASH_SIZE 0x200000 static struct physmap_flash_data dk_flash_data = { @@ -2644,7 +2644,7 @@ }; static struct resource dk_flash_resource = { -@@ -223,8 +400,12 @@ +@@ -223,8 +400,12 @@ static void __init dk_board_init(void) platform_device_register(&dk_flash); /* LEDs */ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); @@ -2907,7 +2907,7 @@ static void __init ek_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ -@@ -64,8 +54,16 @@ +@@ -64,8 +54,16 @@ static void __init ek_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -2926,7 +2926,7 @@ } static void __init ek_init_irq(void) -@@ -73,6 +71,187 @@ +@@ -73,6 +71,187 @@ static void __init ek_init_irq(void) at91rm9200_init_interrupts(NULL); } @@ -3114,7 +3114,7 @@ static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, -@@ -122,7 +301,7 @@ +@@ -122,7 +301,7 @@ static struct i2c_board_info __initdata #define EK_FLASH_SIZE 0x200000 static struct physmap_flash_data ek_flash_data = { @@ -3123,7 +3123,7 @@ }; static struct resource ek_flash_resource = { -@@ -189,7 +368,7 @@ +@@ -189,7 +368,7 @@ static void __init ek_board_init(void) /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* VGA */ @@ -3322,7 +3322,7 @@ static void __init kb9202_map_io(void) { -@@ -59,8 +50,20 @@ +@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -3345,7 +3345,7 @@ } static void __init kb9202_init_irq(void) -@@ -111,6 +114,48 @@ +@@ -111,6 +114,48 @@ static struct at91_nand_data __initdata .partition_info = nand_partitions, }; @@ -3394,7 +3394,7 @@ static void __init kb9202_board_init(void) { /* Serial */ -@@ -129,6 +174,8 @@ +@@ -129,6 +174,8 @@ static void __init kb9202_board_init(voi at91_add_device_spi(NULL, 0); /* NAND */ at91_add_device_nand(&kb9202_nand_data); @@ -3920,7 +3920,7 @@ } static void __init ek_init_irq(void) -@@ -85,6 +89,35 @@ +@@ -85,6 +89,35 @@ static struct at91_udc_data __initdata e /* @@ -3956,7 +3956,7 @@ * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -@@ -110,6 +143,8 @@ +@@ -110,6 +143,8 @@ static struct spi_board_info ek_spi_devi .chip_select = 0, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 1, @@ -3965,7 +3965,7 @@ }, #endif }; -@@ -172,6 +207,74 @@ +@@ -172,6 +207,74 @@ static struct at91_mmc_data __initdata e // .vcc_pin = ... not connected }; @@ -4040,7 +4040,7 @@ static void __init ek_board_init(void) { /* Serial */ -@@ -190,6 +293,16 @@ +@@ -190,6 +293,16 @@ static void __init ek_board_init(void) at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ at91_add_device_i2c(NULL, 0); @@ -4093,7 +4093,7 @@ static void __init ek_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ -@@ -68,8 +60,11 @@ +@@ -68,8 +60,11 @@ static void __init ek_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); @@ -4107,7 +4107,7 @@ } static void __init ek_init_irq(void) -@@ -239,6 +234,35 @@ +@@ -239,6 +234,35 @@ static void __init ek_add_device_ts(void #endif /* @@ -4143,7 +4143,7 @@ * SPI devices */ static struct spi_board_info ek_spi_devices[] = { -@@ -252,10 +276,11 @@ +@@ -252,10 +276,11 @@ static struct spi_board_info ek_spi_devi { .modalias = "ads7846", .chip_select = 2, @@ -4156,7 +4156,7 @@ }, #endif #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) -@@ -271,6 +296,9 @@ +@@ -271,6 +296,9 @@ static struct spi_board_info ek_spi_devi .chip_select = 3, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 0, @@ -4166,7 +4166,7 @@ }, #endif }; -@@ -408,24 +436,28 @@ +@@ -408,24 +436,28 @@ static struct gpio_keys_button ek_button .code = BTN_0, .desc = "Button 0", .active_low = 1, @@ -4195,7 +4195,7 @@ } }; -@@ -445,13 +477,13 @@ +@@ -445,13 +477,13 @@ static struct platform_device ek_button_ static void __init ek_add_device_buttons(void) { @@ -4213,7 +4213,7 @@ at91_set_deglitch(AT91_PIN_PA24, 1); platform_device_register(&ek_button_device); -@@ -460,6 +492,29 @@ +@@ -460,6 +492,29 @@ static void __init ek_add_device_buttons static void __init ek_add_device_buttons(void) {} #endif @@ -4243,7 +4243,7 @@ static void __init ek_board_init(void) { /* Serial */ -@@ -481,6 +536,9 @@ +@@ -481,6 +536,9 @@ static void __init ek_board_init(void) at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); /* Touchscreen */ ek_add_device_ts(); @@ -4253,7 +4253,7 @@ #else /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); -@@ -489,6 +547,11 @@ +@@ -489,6 +547,11 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* Push Buttons */ ek_add_device_buttons(); @@ -4306,7 +4306,7 @@ } static void __init ek_init_irq(void) -@@ -141,7 +136,7 @@ +@@ -141,7 +136,7 @@ static struct spi_board_info ek_spi_devi { .modalias = "ads7846", .chip_select = 3, @@ -4315,7 +4315,7 @@ .bus_num = 0, .platform_data = &ads_info, .irq = AT91SAM9263_ID_IRQ1, -@@ -301,9 +296,9 @@ +@@ -301,9 +296,9 @@ static struct platform_device ek_button_ static void __init ek_add_device_buttons(void) { @@ -4327,7 +4327,7 @@ at91_set_deglitch(AT91_PIN_PC4, 1); platform_device_register(&ek_button_device); -@@ -341,7 +336,7 @@ +@@ -341,7 +336,7 @@ static struct gpio_led ek_leds[] = { .name = "ds3", .gpio = AT91_PIN_PB7, .default_trigger = "heartbeat", @@ -4336,7 +4336,7 @@ }; -@@ -374,6 +369,9 @@ +@@ -374,6 +369,9 @@ static void __init ek_board_init(void) at91_add_device_ac97(&ek_ac97_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); @@ -4387,7 +4387,7 @@ } static void __init ek_init_irq(void) -@@ -61,6 +56,14 @@ +@@ -61,6 +56,14 @@ static void __init ek_init_irq(void) /* @@ -4402,7 +4402,7 @@ * MCI (SD/MMC) */ static struct at91_mmc_data __initdata ek_mmc_data = { -@@ -180,6 +183,8 @@ +@@ -180,6 +183,8 @@ static void __init ek_board_init(void) { /* Serial */ at91_add_device_serial(); @@ -4411,7 +4411,7 @@ /* I2C */ at91_add_device_i2c(NULL, 0); /* NAND */ -@@ -190,6 +195,9 @@ +@@ -190,6 +195,9 @@ static void __init ek_board_init(void) at91_add_device_mmc(0, &ek_mmc_data); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); @@ -5278,7 +5278,7 @@ /* -@@ -113,12 +114,34 @@ +@@ -113,12 +114,34 @@ static void pmc_sys_mode(struct clk *clk at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); } @@ -5313,7 +5313,7 @@ static struct clk uhpck = { .name = "uhpck", .parent = &pllb, -@@ -254,6 +277,23 @@ +@@ -254,6 +277,23 @@ EXPORT_SYMBOL(clk_get_rate); /*------------------------------------------------------------------------*/ @@ -5337,7 +5337,7 @@ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS /* -@@ -362,7 +402,7 @@ +@@ -362,7 +402,7 @@ static void __init init_programmable_clo static int at91_clk_show(struct seq_file *s, void *unused) { @@ -5346,7 +5346,7 @@ struct clk *clk; seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR)); -@@ -370,7 +410,10 @@ +@@ -370,7 +410,10 @@ static int at91_clk_show(struct seq_file seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); @@ -5358,7 +5358,7 @@ seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); -@@ -383,6 +426,8 @@ +@@ -383,6 +426,8 @@ static int at91_clk_show(struct seq_file state = (scsr & clk->pmc_mask) ? "on" : "off"; else if (clk->mode == pmc_periph_mode) state = (pcsr & clk->pmc_mask) ? "on" : "off"; @@ -5367,7 +5367,7 @@ else if (clk->pmc_mask) state = (sr & clk->pmc_mask) ? "on" : "off"; else if (clk == &clk32k || clk == &main_clk) -@@ -583,6 +628,17 @@ +@@ -583,6 +628,17 @@ int __init at91_clock_init(unsigned long uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); /* @@ -5385,7 +5385,7 @@ * MCK and CPU derive from one of those primary clocks. * For now, assume this parentage won't change. */ -@@ -599,6 +655,9 @@ +@@ -599,6 +655,9 @@ int __init at91_clock_init(unsigned long for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) list_add_tail(&standard_pmc_clocks[i]->node, &clocks); @@ -5397,7 +5397,7 @@ --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h -@@ -41,6 +41,7 @@ +@@ -41,6 +41,7 @@ extern void __init at91_clock_associate( /* Power Management */ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); @@ -5407,7 +5407,7 @@ #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c -@@ -490,7 +490,8 @@ +@@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init /*--------------------------------------------------------------------------*/ @@ -5417,7 +5417,7 @@ * category than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; -@@ -557,6 +558,7 @@ +@@ -557,6 +558,7 @@ void __init at91_gpio_init(struct at91_g data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS; /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ @@ -5784,7 +5784,7 @@ static int at91_pm_valid_state(suspend_state_t state) { -@@ -62,6 +194,7 @@ +@@ -62,6 +194,7 @@ static int at91_pm_begin(suspend_state_t * Verify that all the clocks are correct before entering * slow-clock mode. */ @@ -5792,7 +5792,7 @@ static int at91_pm_verify_clocks(void) { unsigned long scsr; -@@ -107,24 +240,24 @@ +@@ -107,24 +240,24 @@ static int at91_pm_verify_clocks(void) } /* @@ -5823,7 +5823,7 @@ static int at91_pm_enter(suspend_state_t state) { -@@ -158,11 +291,14 @@ +@@ -158,11 +291,14 @@ static int at91_pm_enter(suspend_state_t * turning off the main oscillator; reverse on wakeup. */ if (slow_clock) { @@ -5840,7 +5840,7 @@ /* FALLTHROUGH leaving master clock alone */ } -@@ -175,13 +311,15 @@ +@@ -175,13 +311,15 @@ static int at91_pm_enter(suspend_state_t case PM_SUSPEND_STANDBY: /* * NOTE: the Wait-for-Interrupt instruction needs to be @@ -5860,7 +5860,7 @@ case PM_SUSPEND_ON: asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ -@@ -196,6 +334,7 @@ +@@ -196,6 +334,7 @@ static int at91_pm_enter(suspend_state_t at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); error: @@ -5868,7 +5868,7 @@ target_state = PM_SUSPEND_ON; at91_irq_resume(); at91_gpio_resume(); -@@ -220,21 +359,20 @@ +@@ -220,21 +359,20 @@ static struct platform_suspend_ops at91_ static int __init at91_pm_init(void) { @@ -6186,7 +6186,7 @@ + .word .-at91_slow_clock --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile -@@ -11,5 +11,8 @@ +@@ -11,5 +11,8 @@ obj- := # PCI support is optional obj-$(CONFIG_PCI) += pci.o @@ -6197,7 +6197,7 @@ obj-$(CONFIG_MACH_KS8695) += board-micrel.o --- a/arch/arm/mach-ks8695/devices.c +++ b/arch/arm/mach-ks8695/devices.c -@@ -176,6 +176,27 @@ +@@ -176,6 +176,27 @@ static void __init ks8695_add_device_wat #endif @@ -6227,7 +6227,7 @@ /* --- a/arch/arm/mach-ks8695/gpio.c +++ b/arch/arm/mach-ks8695/gpio.c -@@ -136,9 +136,9 @@ +@@ -136,9 +136,9 @@ int __init_or_module gpio_direction_outp /* set line state */ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); if (state) @@ -6239,7 +6239,7 @@ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); /* set pin as output */ -@@ -168,9 +168,9 @@ +@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, un /* set output line state */ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); if (state) @@ -6251,7 +6251,7 @@ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); local_irq_restore(flags); -@@ -189,7 +189,7 @@ +@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin) return -EINVAL; x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); @@ -6359,7 +6359,7 @@ +__initcall(leds_init); --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c -@@ -141,7 +141,7 @@ +@@ -141,7 +141,7 @@ static struct pci_ops ks8695_pci_ops = { .write = ks8695_pci_writeconfig, }; @@ -6370,7 +6370,7 @@ } --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig -@@ -1056,5 +1056,21 @@ +@@ -1056,5 +1056,21 @@ config DEVPORT source "drivers/s390/char/Kconfig" @@ -6394,7 +6394,7 @@ --- a/drivers/char/Makefile +++ b/drivers/char/Makefile -@@ -98,6 +98,8 @@ +@@ -98,6 +98,8 @@ obj-$(CONFIG_GPIO_DEVICE) += gpio_dev.o obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_GPIO_TB0219) += tb0219.o obj-$(CONFIG_TELCLOCK) += tlclk.o @@ -6981,7 +6981,7 @@ +MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200") --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -88,6 +88,14 @@ +@@ -88,6 +88,14 @@ config I2C_AT91 to support combined I2C messages. Use the i2c-gpio driver unless your system can cope with those limitations. @@ -6996,7 +6996,7 @@ config I2C_AU1550 tristate "Au1550/Au1200 SMBus interface" depends on SOC_AU1550 || SOC_AU1200 -@@ -626,6 +634,14 @@ +@@ -626,6 +634,14 @@ config I2C_VOODOO3 This driver can also be built as a module. If so, the module will be called i2c-voodoo3. @@ -7013,7 +7013,7 @@ depends on ISA --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile -@@ -29,6 +29,7 @@ +@@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o @@ -7036,7 +7036,7 @@ static struct clk *twi_clk; static void __iomem *twi_base; -@@ -53,7 +56,7 @@ +@@ -53,7 +56,7 @@ static void __devinit at91_twi_hwinit(vo at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ /* Calcuate clock dividers */ @@ -7045,7 +7045,7 @@ cdiv = cdiv + 1; /* round up */ ckdiv = 0; while (cdiv > 255) { -@@ -61,11 +64,12 @@ +@@ -61,11 +64,12 @@ static void __devinit at91_twi_hwinit(vo cdiv = cdiv >> 1; } @@ -7281,7 +7281,7 @@ +MODULE_LICENSE("GPL"); --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c -@@ -659,13 +659,14 @@ +@@ -659,13 +659,14 @@ static void at91_mci_set_ios(struct mmc_ /* maybe switch power to the card */ if (host->board->vcc_pin) { switch (ios->power_mode) { @@ -7305,7 +7305,7 @@ } --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig -@@ -270,5 +270,17 @@ +@@ -270,5 +270,17 @@ config MTD_DOCPROBE_55AA LinuxBIOS or if you need to recover a DiskOnChip Millennium on which you have managed to wipe the first block. @@ -7326,7 +7326,7 @@ +endmenu --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile -@@ -17,3 +17,4 @@ +@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o @@ -8009,7 +8009,7 @@ +MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200"); --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig -@@ -273,12 +273,53 @@ +@@ -273,12 +273,53 @@ config MTD_NAND_CS553X If you say "m", the module will be called "cs553x_nand.ko". config MTD_NAND_AT91 @@ -8158,7 +8158,7 @@ * Hardware specific access to control-lines */ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -@@ -44,6 +113,13 @@ +@@ -44,6 +113,13 @@ static void at91_nand_cmd_ctrl(struct mt struct nand_chip *nand_chip = mtd->priv; struct at91_nand_host *host = nand_chip->priv; @@ -8172,7 +8172,7 @@ if (cmd == NAND_CMD_NONE) return; -@@ -65,27 +141,249 @@ +@@ -65,27 +141,249 @@ static int at91_nand_device_ready(struct } /* @@ -8431,7 +8431,7 @@ /* * Probe for the NAND device. */ -@@ -94,6 +392,8 @@ +@@ -94,6 +392,8 @@ static int __init at91_nand_probe(struct struct at91_nand_host *host; struct mtd_info *mtd; struct nand_chip *nand_chip; @@ -8440,7 +8440,7 @@ int res; #ifdef CONFIG_MTD_PARTITIONS -@@ -108,8 +408,13 @@ +@@ -108,8 +408,13 @@ static int __init at91_nand_probe(struct return -ENOMEM; } @@ -8456,7 +8456,7 @@ if (host->io_base == NULL) { printk(KERN_ERR "at91_nand: ioremap failed\n"); kfree(host); -@@ -119,6 +424,7 @@ +@@ -119,6 +424,7 @@ static int __init at91_nand_probe(struct mtd = &host->mtd; nand_chip = &host->nand_chip; host->board = pdev->dev.platform_data; @@ -8464,7 +8464,7 @@ nand_chip->priv = host; /* link the private data structures */ mtd->priv = nand_chip; -@@ -132,11 +438,40 @@ +@@ -132,11 +438,40 @@ static int __init at91_nand_probe(struct if (host->board->rdy_pin) nand_chip->dev_ready = at91_nand_device_ready; @@ -8506,7 +8506,7 @@ platform_set_drvdata(pdev, host); at91_nand_enable(host); -@@ -149,8 +484,60 @@ +@@ -149,8 +484,60 @@ static int __init at91_nand_probe(struct } } @@ -8569,7 +8569,7 @@ res = -ENXIO; goto out; } -@@ -179,8 +566,11 @@ +@@ -179,8 +566,11 @@ static int __init at91_nand_probe(struct if (!res) return res; @@ -8581,7 +8581,7 @@ out: at91_nand_disable(host); platform_set_drvdata(pdev, NULL); -@@ -192,7 +582,7 @@ +@@ -192,7 +582,7 @@ out: /* * Remove a NAND device. */ @@ -8590,7 +8590,7 @@ { struct at91_nand_host *host = platform_get_drvdata(pdev); struct mtd_info *mtd = &host->mtd; -@@ -208,8 +598,7 @@ +@@ -208,8 +598,7 @@ static int __devexit at91_nand_remove(st } static struct platform_driver at91_nand_driver = { @@ -8600,7 +8600,7 @@ .driver = { .name = "at91_nand", .owner = THIS_MODULE, -@@ -218,7 +607,7 @@ +@@ -218,7 +607,7 @@ static struct platform_driver at91_nand_ static int __init at91_nand_init(void) { @@ -8609,7 +8609,7 @@ } -@@ -233,4 +622,4 @@ +@@ -233,4 +622,4 @@ module_exit(at91_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Rick Bronson"); @@ -8617,7 +8617,7 @@ +MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9"); --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig -@@ -47,3 +47,10 @@ +@@ -47,3 +47,10 @@ config EP93XX_ETH help This is a driver for the ethernet hardware included in EP93xx CPUs. Say Y if you are building a kernel for EP93xx based devices. @@ -8630,14 +8630,14 @@ + and enable Ethernet support, then select this option. --- a/drivers/net/arm/Makefile +++ b/drivers/net/arm/Makefile -@@ -9,3 +9,4 @@ +@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o obj-$(CONFIG_ARM_ETHER1) += ether1.o obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o +obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695_ether.o --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c -@@ -220,7 +220,7 @@ +@@ -220,7 +220,7 @@ static irqreturn_t at91ether_phy_interru if (!(phy & (1 << 0))) goto done; } @@ -8646,7 +8646,7 @@ read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */ if (!(phy & ((1 << 2) | 1))) goto done; -@@ -286,7 +286,7 @@ +@@ -286,7 +286,7 @@ static void enable_phyirq(struct net_dev dsintr = (1 << 15) | ( 1 << 14); write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr); } @@ -8655,7 +8655,7 @@ dsintr = (1 << 10) | ( 1 << 8); write_phy(lp->phy_address, MII_TPISTATUS, dsintr); } -@@ -341,7 +341,7 @@ +@@ -341,7 +341,7 @@ static void disable_phyirq(struct net_de dsintr = ~(1 << 14); write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr); } @@ -8664,7 +8664,7 @@ read_phy(lp->phy_address, MII_TPISTATUS, &dsintr); dsintr = ~((1 << 10) | (1 << 8)); write_phy(lp->phy_address, MII_TPISTATUS, dsintr); -@@ -820,7 +820,7 @@ +@@ -820,7 +820,7 @@ static int at91ether_tx(struct sk_buff * lp->skb = skb; lp->skb_length = skb->len; lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); @@ -8673,7 +8673,7 @@ /* Set address of the data in the Transmit Address register */ at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr); -@@ -843,34 +843,32 @@ +@@ -843,34 +843,32 @@ static int at91ether_tx(struct sk_buff * */ static struct net_device_stats *at91ether_stats(struct net_device *dev) { @@ -8723,7 +8723,7 @@ } /* -@@ -896,16 +894,16 @@ +@@ -896,16 +894,16 @@ static void at91ether_rx(struct net_devi skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies; @@ -8743,7 +8743,7 @@ dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE; /* reset ownership bit */ if (lp->rxBuffIndex == MAX_RX_DESCR-1) /* wrap after last buffer */ -@@ -934,7 +932,7 @@ +@@ -934,7 +932,7 @@ static irqreturn_t at91ether_interrupt(i if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */ /* The TCOM bit is set even if the transmission failed. */ if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY)) @@ -8752,7 +8752,7 @@ if (lp->skb) { dev_kfree_skb_irq(lp->skb); -@@ -978,15 +976,22 @@ +@@ -978,15 +976,22 @@ static int __init at91ether_setup(unsign struct net_device *dev; struct at91_private *lp; unsigned int val; @@ -8778,7 +8778,7 @@ /* Install the interrupt handler */ if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) { -@@ -1043,7 +1048,9 @@ +@@ -1043,7 +1048,9 @@ static int __init at91ether_setup(unsign } else if (machine_is_csb337()) { /* mix link activity status into LED2 link state */ write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22); @@ -8789,7 +8789,7 @@ disable_mdi(); spin_unlock_irq(&lp->lock); -@@ -1058,12 +1065,12 @@ +@@ -1058,12 +1065,12 @@ static int __init at91ether_setup(unsign lp->phy_address = phy_address; /* MDI address of PHY */ /* Register the network interface */ @@ -8805,7 +8805,7 @@ } /* Determine current link speed */ -@@ -1101,6 +1108,8 @@ +@@ -1101,6 +1108,8 @@ static int __init at91ether_setup(unsign printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name); else if (phy_type == MII_AC101L_ID) printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name); @@ -8814,7 +8814,7 @@ else if (phy_type == MII_KS8721_ID) printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name); else if (phy_type == MII_T78Q21x3_ID) -@@ -1146,6 +1155,7 @@ +@@ -1146,6 +1155,7 @@ static int __init at91ether_probe(struct case MII_DP83847_ID: /* National Semiconductor DP83847: */ case MII_DP83848_ID: /* National Semiconductor DP83848: */ case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */ @@ -8822,7 +8822,7 @@ case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */ case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */ -@@ -1246,3 +1256,4 @@ +@@ -1246,3 +1256,4 @@ module_exit(at91ether_exit) MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver"); MODULE_AUTHOR("Andrew Victor"); @@ -8839,7 +8839,7 @@ /* Micrel KS8721 PHY */ #define MII_KS8721_ID 0x00221610 -@@ -84,7 +87,6 @@ +@@ -84,7 +87,6 @@ struct recv_desc_bufs struct at91_private { @@ -9956,7 +9956,7 @@ +#endif --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig -@@ -487,12 +487,12 @@ +@@ -487,12 +487,12 @@ config RTC_DRV_AT91RM9200 this is powered by the backup power supply. config RTC_DRV_AT91SAM9 @@ -9985,7 +9985,7 @@ #include <asm/arch/at91_rtc.h> -@@ -307,12 +304,6 @@ +@@ -307,12 +304,6 @@ static int __init at91_rtc_probe(struct return ret; } @@ -10008,7 +10008,7 @@ #include <asm/arch/at91_rtt.h> -@@ -150,6 +151,9 @@ +@@ -150,6 +151,9 @@ static int at91_rtc_settime(struct devic return 0; } @@ -10018,7 +10018,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct sam9_rtc *rtc = dev_get_drvdata(dev); -@@ -176,6 +180,9 @@ +@@ -176,6 +180,9 @@ static int at91_rtc_readalarm(struct dev return 0; } @@ -10028,7 +10028,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct sam9_rtc *rtc = dev_get_drvdata(dev); -@@ -321,10 +328,6 @@ +@@ -321,10 +328,6 @@ static int __init at91_rtc_probe(struct if (!rtc) return -ENOMEM; @@ -10041,7 +10041,7 @@ rtc->rtt += r->start; --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -113,6 +113,15 @@ +@@ -113,6 +113,15 @@ config SPI_GPIO If unsure, say N. @@ -10059,7 +10059,7 @@ depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile -@@ -29,6 +29,7 @@ +@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o @@ -10280,7 +10280,7 @@ +MODULE_ALIAS("platform:at91_spi"); --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig -@@ -118,10 +118,10 @@ +@@ -118,10 +118,10 @@ config USB_AMD5536UDC config USB_GADGET_ATMEL_USBA boolean "Atmel USBA" select USB_GADGET_DUALSPEED @@ -10295,7 +10295,7 @@ tristate --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c -@@ -1827,7 +1827,7 @@ +@@ -1827,7 +1827,7 @@ static int at91udc_suspend(struct platfo */ if ((!udc->suspended && udc->addr) || !wake @@ -10322,7 +10322,7 @@ #ifdef CONFIG_USB_GADGET_DEBUG_FS #include <linux/debugfs.h> -@@ -324,53 +326,6 @@ +@@ -324,53 +326,6 @@ static int vbus_is_present(struct usba_u return 1; } @@ -10376,7 +10376,7 @@ static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) { unsigned int transaction_len; -@@ -387,7 +342,7 @@ +@@ -387,7 +342,7 @@ static void next_fifo_transaction(struct ep->ep.name, req, transaction_len, req->last_transaction ? ", done" : ""); @@ -10385,7 +10385,7 @@ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); req->req.actual += transaction_len; } -@@ -476,7 +431,7 @@ +@@ -476,7 +431,7 @@ static void receive_data(struct usba_ep bytecount = req->req.length - req->req.actual; } @@ -10394,7 +10394,7 @@ ep->fifo, bytecount); req->req.actual += bytecount; -@@ -1029,33 +984,6 @@ +@@ -1029,33 +984,6 @@ static const struct usb_gadget_ops usba_ .set_selfpowered = usba_udc_set_selfpowered, }; @@ -10428,7 +10428,7 @@ static struct usb_endpoint_descriptor usba_ep0_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, -@@ -1074,7 +1002,6 @@ +@@ -1074,7 +1002,6 @@ static void nop_release(struct device *d static struct usba_udc the_udc = { .gadget = { .ops = &usba_udc_ops, @@ -10436,7 +10436,7 @@ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list), .is_dualspeed = 1, .name = "atmel_usba_udc", -@@ -1231,7 +1158,7 @@ +@@ -1231,7 +1158,7 @@ static int do_test_mode(struct usba_udc } else { usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); usba_writel(udc, TST, USBA_TST_PKT_MODE); @@ -10445,7 +10445,7 @@ sizeof(test_packet_buffer)); usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); dev_info(dev, "Entering Test_Packet mode...\n"); -@@ -1530,13 +1457,13 @@ +@@ -1530,13 +1457,13 @@ restart: DBG(DBG_HW, "Packet length: %u\n", pkt_len); if (pkt_len != sizeof(crq)) { pr_warning("udc: Invalid packet length %u " @@ -10461,7 +10461,7 @@ /* Free up one bank in the FIFO so that we can * generate or receive a reply right away. */ -@@ -1908,7 +1835,7 @@ +@@ -1908,7 +1835,7 @@ static int __init usba_udc_probe(struct regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID); @@ -10470,7 +10470,7 @@ return -ENXIO; irq = platform_get_irq(pdev, 0); -@@ -1956,16 +1883,44 @@ +@@ -1956,16 +1883,44 @@ static int __init usba_udc_probe(struct usba_writel(udc, CTRL, 0); clk_disable(pclk); @@ -10516,7 +10516,7 @@ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); } -@@ -1984,7 +1939,7 @@ +@@ -1984,7 +1939,7 @@ static int __init usba_udc_probe(struct goto err_device_add; } @@ -10525,7 +10525,7 @@ if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { udc->vbus_pin = pdata->vbus_pin; -@@ -2004,7 +1959,7 @@ +@@ -2004,7 +1959,7 @@ static int __init usba_udc_probe(struct } usba_init_debugfs(udc); @@ -10534,7 +10534,7 @@ usba_ep_init_debugfs(udc, &usba_ep[i]); return 0; -@@ -2012,6 +1967,8 @@ +@@ -2012,6 +1967,8 @@ static int __init usba_udc_probe(struct err_device_add: free_irq(irq, udc); err_request_irq: @@ -10543,7 +10543,7 @@ iounmap(udc->fifo); err_map_fifo: iounmap(udc->regs); -@@ -2029,10 +1986,11 @@ +@@ -2029,10 +1986,11 @@ static int __exit usba_udc_remove(struct { struct usba_udc *udc; int i; @@ -10558,7 +10558,7 @@ --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c -@@ -330,7 +330,7 @@ +@@ -330,7 +330,7 @@ ohci_hcd_at91_drv_suspend(struct platfor * * REVISIT: some boards will be able to turn VBUS off... */ @@ -10569,7 +10569,7 @@ } --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig -@@ -889,6 +889,17 @@ +@@ -889,6 +889,17 @@ config FB_EPSON1355 framebuffer. Product specs at <http://www.erd.epson.com/vdc/html/products.htm>. @@ -10589,7 +10589,7 @@ depends on FB --- a/drivers/video/Makefile +++ b/drivers/video/Makefile -@@ -87,7 +87,8 @@ +@@ -87,7 +87,8 @@ obj-$(CONFIG_FB_G364) += g36 obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_HIT) += hitfb.o obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o @@ -10610,7 +10610,7 @@ #define ATMEL_LCDC_FIFO_SIZE 2048 #else #define ATMEL_LCDC_FIFO_SIZE 512 -@@ -903,11 +903,45 @@ +@@ -903,11 +903,45 @@ static int __exit atmel_lcdfb_remove(str return 0; } @@ -10661,7 +10661,7 @@ .owner = THIS_MODULE, --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig -@@ -112,3 +112,11 @@ +@@ -112,3 +112,11 @@ config BACKLIGHT_CARILLO_RANCH help If you have a Intel LE80578 (Carillo Ranch) say Y to enable the backlight driver. @@ -10675,7 +10675,7 @@ + backlight driver. --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile -@@ -10,3 +10,4 @@ +@@ -10,3 +10,4 @@ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomo obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o @@ -11507,7 +11507,7 @@ +MODULE_LICENSE("GPL"); --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -66,6 +66,14 @@ +@@ -66,6 +66,14 @@ config AT91RM9200_WATCHDOG Watchdog timer embedded into AT91RM9200 chips. This will reboot your system when the timeout is reached. @@ -11524,7 +11524,7 @@ depends on FOOTBRIDGE --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -26,6 +26,7 @@ +@@ -26,6 +26,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb. # ARM Architecture obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o @@ -12556,7 +12556,7 @@ /* USB Device */ struct at91_udc_data { -@@ -45,6 +46,9 @@ +@@ -45,6 +46,9 @@ struct at91_udc_data { }; extern void __init at91_add_device_udc(struct at91_udc_data *data); @@ -12566,7 +12566,7 @@ /* Compact Flash */ struct at91_cf_data { u8 irq_pin; /* I/O IRQ */ -@@ -158,6 +162,9 @@ +@@ -158,6 +162,9 @@ extern void __init at91_add_device_ac97( /* ISI */ extern void __init at91_add_device_isi(void); @@ -12578,7 +12578,7 @@ extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); --- a/include/asm-arm/arch-at91/cpu.h +++ b/include/asm-arm/arch-at91/cpu.h -@@ -48,6 +48,17 @@ +@@ -48,6 +48,17 @@ static inline unsigned long at91_arch_id return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); } @@ -12596,7 +12596,7 @@ #ifdef CONFIG_ARCH_AT91RM9200 #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) -@@ -83,8 +94,12 @@ +@@ -83,8 +94,12 @@ static inline unsigned long at91_arch_id #ifdef CONFIG_ARCH_AT91CAP9 #define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) @@ -12858,7 +12858,7 @@ #elif defined(CONFIG_ARCH_AT91SAM9RL) --- a/include/asm-arm/arch-ks8695/devices.h +++ b/include/asm-arm/arch-ks8695/devices.h -@@ -18,6 +18,11 @@ +@@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan extern void __init ks8695_add_device_lan(void); extern void __init ks8695_add_device_hpna(void); @@ -12872,7 +12872,7 @@ #define KS8695_MODE_MINIPCI 1 --- a/include/linux/clk.h +++ b/include/linux/clk.h -@@ -121,4 +121,24 @@ +@@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru */ struct clk *clk_get_parent(struct clk *clk); @@ -12935,7 +12935,7 @@ + --- a/include/video/atmel_lcdc.h +++ b/include/video/atmel_lcdc.h -@@ -39,6 +39,7 @@ +@@ -39,6 +39,7 @@ struct atmel_lcdfb_info { u8 bl_power; #endif bool lcdcon_is_backlight; @@ -12969,7 +12969,7 @@ static struct clk *pck1_clk; static struct clk *pllb_clk; -@@ -276,7 +268,6 @@ +@@ -276,7 +268,6 @@ static struct platform_device *eti_b1_sn static int __init eti_b1_init(void) { int ret; @@ -12977,7 +12977,7 @@ struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data; if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) { -@@ -310,19 +301,12 @@ +@@ -310,19 +301,12 @@ static int __init eti_b1_init(void) goto fail_io_unmap; } @@ -13005,7 +13005,7 @@ * Set PCK1 parent to PLLB and its rate to 12 Mhz. --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c -@@ -114,7 +114,11 @@ +@@ -114,7 +114,11 @@ snd_at73c213_write_reg(struct snd_at73c2 static struct snd_pcm_hardware snd_at73c213_playback_hw = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER, |