diff options
Diffstat (limited to 'target/linux/at91/patches-3.10')
4 files changed, 106 insertions, 0 deletions
diff --git a/target/linux/at91/patches-3.10/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches-3.10/100-ARM-at91-build-dtb-for-LMU5000.patch new file mode 100644 index 0000000..c631f8d --- /dev/null +++ b/target/linux/at91/patches-3.10/100-ARM-at91-build-dtb-for-LMU5000.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb + dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb + # sam9g45 + dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb ++dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb + dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb + # sam9n12 + dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb diff --git a/target/linux/at91/patches-3.10/700-tqma9263-support.patch b/target/linux/at91/patches-3.10/700-tqma9263-support.patch new file mode 100644 index 0000000..d249783 --- /dev/null +++ b/target/linux/at91/patches-3.10/700-tqma9263-support.patch @@ -0,0 +1,25 @@ +--- a/arch/arm/mach-at91/Kconfig.non_dt ++++ b/arch/arm/mach-at91/Kconfig.non_dt +@@ -258,6 +258,12 @@ config MACH_USB_A9263 + Select this if you are using a Calao Systems USB-A9263. + <http://www.calao-systems.com> + ++config MACH_TQMA9263 ++ bool "TQ Components TQMa9263 board" ++ help ++ Select this if you are using the an TQ Components TQMa9263 board. ++ <http://www.tq-components.com/> ++ + endif + + # ---------------------------------------------------------- +--- a/arch/arm/mach-at91/Makefile ++++ b/arch/arm/mach-at91/Makefile +@@ -68,6 +68,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar + # AT91SAM9263 board-specific support + obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o + obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o ++obj-$(CONFIG_MACH_TQMA9263) += board-tqma9263.o + + # AT91SAM9RL board-specific support + obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o diff --git a/target/linux/at91/patches-3.10/805-free_some_portc_pins.patch b/target/linux/at91/patches-3.10/805-free_some_portc_pins.patch new file mode 100644 index 0000000..a9694d1 --- /dev/null +++ b/target/linux/at91/patches-3.10/805-free_some_portc_pins.patch @@ -0,0 +1,11 @@ +--- a/arch/arm/mach-at91/at91sam9260_devices.c ++++ b/arch/arm/mach-at91/at91sam9260_devices.c +@@ -507,7 +507,7 @@ static struct platform_device at91sam926 + .num_resources = ARRAY_SIZE(spi1_resources), + }; + +-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; ++static const unsigned spi1_standard_cs[2] = { AT91_PIN_PB3, AT91_PIN_PC5 }; + + void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) + { diff --git a/target/linux/at91/patches-3.10/901-AT91-flexibity-default-leds-to-heartbeat.patch b/target/linux/at91/patches-3.10/901-AT91-flexibity-default-leds-to-heartbeat.patch new file mode 100644 index 0000000..a97850a --- /dev/null +++ b/target/linux/at91/patches-3.10/901-AT91-flexibity-default-leds-to-heartbeat.patch @@ -0,0 +1,60 @@ +--- a/arch/arm/mach-at91/board-flexibity.c ++++ b/arch/arm/mach-at91/board-flexibity.c +@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[] + .name = "usb1:green", + .gpio = AT91_PIN_PA12, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb1:red", + .gpio = AT91_PIN_PA13, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb2:green", + .gpio = AT91_PIN_PB26, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb2:red", + .gpio = AT91_PIN_PB27, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb3:green", + .gpio = AT91_PIN_PC8, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb3:red", + .gpio = AT91_PIN_PC6, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb4:green", + .gpio = AT91_PIN_PB4, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb4:red", + .gpio = AT91_PIN_PB5, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + } + }; + |