summaryrefslogtreecommitdiff
path: root/target/linux/at91/patches/800-netus-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/at91/patches/800-netus-support.patch')
-rwxr-xr-xtarget/linux/at91/patches/800-netus-support.patch54
1 files changed, 54 insertions, 0 deletions
diff --git a/target/linux/at91/patches/800-netus-support.patch b/target/linux/at91/patches/800-netus-support.patch
new file mode 100755
index 0000000..8294c8f
--- /dev/null
+++ b/target/linux/at91/patches/800-netus-support.patch
@@ -0,0 +1,54 @@
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
+@@ -354,6 +354,13 @@ config MACH_CPU9G20
+ Select this if you are using a Eukrea Electromatique's
+ CPU9G20 Board <http://www.eukrea.com/>
+
++config MACH_NETUS_FOXBOARD
++ bool "Acmesystems NetusG20 board"
++ depends on ARCH_AT91SAM9G20
++ help
++ Select this if you are using a Acmesystems NetusG20
++ board <http://netus.acmesystems.it/>
++
+ endif
+
+ # ----------------------------------------------------------
+@@ -444,6 +451,26 @@
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
+
++config NETUS_HEARTBEAT_LED
++ bool "Use heartbeat trigger for led"
++ depends on MACH_NETUS_FOXBOARD
++ help
++ Select this option to enable default trigger heartbeart for
++ FoxBoardG20 red led.
++
++config NETUS_SERIALS
++ bool "Enable serials"
++ depends on MACH_NETUS_FOXBOARD
++ help
++ Select this option to enable serials interface /dev/ttyS1,
++ /dev/ttyS2 and /dev/ttyS5 (for oLed interface)
++
++config NETUS_USE_DATAFLASH
++ bool "Enable the dataflash"
++ depends on MACH_NETUS_FOXBOARD
++ help
++ Select this option to use the dataflash.
++
+ # ----------------------------------------------------------
+
+ comment "AT91 Feature Selections"
+--- a/arch/arm/mach-at91/Makefile
++++ b/arch/arm/mach-at91/Makefile
+@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board
+ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+ obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
+ obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
++obj-$(CONFIG_MACH_NETUS_FOXBOARD) += board-netus-foxboard.o
+
+ # AT91SAM9G45 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+