diff options
Diffstat (limited to 'target/linux/at91/patches/800-netus-support.patch')
| -rwxr-xr-x | target/linux/at91/patches/800-netus-support.patch | 54 |
1 files changed, 54 insertions, 0 deletions
diff --git a/target/linux/at91/patches/800-netus-support.patch b/target/linux/at91/patches/800-netus-support.patch new file mode 100755 index 0000000..8294c8f --- /dev/null +++ b/target/linux/at91/patches/800-netus-support.patch @@ -0,0 +1,54 @@ +--- a/arch/arm/mach-at91/Kconfig ++++ b/arch/arm/mach-at91/Kconfig +@@ -354,6 +354,13 @@ config MACH_CPU9G20 + Select this if you are using a Eukrea Electromatique's + CPU9G20 Board <http://www.eukrea.com/> + ++config MACH_NETUS_FOXBOARD ++ bool "Acmesystems NetusG20 board" ++ depends on ARCH_AT91SAM9G20 ++ help ++ Select this if you are using a Acmesystems NetusG20 ++ board <http://netus.acmesystems.it/> ++ + endif + + # ---------------------------------------------------------- +@@ -444,6 +451,26 @@ + On AT91SAM926x boards both types of NAND flash can be present + (8 and 16 bit data bus width). + ++config NETUS_HEARTBEAT_LED ++ bool "Use heartbeat trigger for led" ++ depends on MACH_NETUS_FOXBOARD ++ help ++ Select this option to enable default trigger heartbeart for ++ FoxBoardG20 red led. ++ ++config NETUS_SERIALS ++ bool "Enable serials" ++ depends on MACH_NETUS_FOXBOARD ++ help ++ Select this option to enable serials interface /dev/ttyS1, ++ /dev/ttyS2 and /dev/ttyS5 (for oLed interface) ++ ++config NETUS_USE_DATAFLASH ++ bool "Enable the dataflash" ++ depends on MACH_NETUS_FOXBOARD ++ help ++ Select this option to use the dataflash. ++ + # ---------------------------------------------------------- + + comment "AT91 Feature Selections" +--- a/arch/arm/mach-at91/Makefile ++++ b/arch/arm/mach-at91/Makefile +@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board + obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o + obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o + obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o ++obj-$(CONFIG_MACH_NETUS_FOXBOARD) += board-netus-foxboard.o + + # AT91SAM9G45 board-specific support + obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o + |