diff options
Diffstat (limited to 'target/linux/at91')
75 files changed, 45335 insertions, 0 deletions
diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile new file mode 100644 index 0000000..f8ca6f6 --- /dev/null +++ b/target/linux/at91/Makefile @@ -0,0 +1,27 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=arm +BOARD:=at91 +BOARDNAME:=AT91 +FEATURES:=squashfs usb + +#LINUX_VERSION:=2.6.21.5 +LINUX_VERSION:=2.6.22.4 + +define Target/Description + Build fimware images for Figment Design Labs VersaLink board. +endef + +include $(INCLUDE_DIR)/kernel-build.mk + +#include the profiles +-include profiles/*.mk + +KERNELNAME:="uImage" +$(eval $(call BuildKernel)) diff --git a/target/linux/at91/base-files/default/etc/inittab b/target/linux/at91/base-files/default/etc/inittab new file mode 100644 index 0000000..a627ce5 --- /dev/null +++ b/target/linux/at91/base-files/default/etc/inittab @@ -0,0 +1,6 @@ +::sysinit:/etc/init.d/rcS S boot +::shutdown:/etc/init.d/rcS K stop +tts/0::askfirst:/bin/ash --login +ttyS0::askfirst:/bin/ash --login + +ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100 diff --git a/target/linux/at91/base-files/default/etc/ipkg.conf b/target/linux/at91/base-files/default/etc/ipkg.conf new file mode 100644 index 0000000..10c4f67 --- /dev/null +++ b/target/linux/at91/base-files/default/etc/ipkg.conf @@ -0,0 +1,3 @@ +src snapshots http://vlink.guthrie.homedns.org/vlink3 +dest root / +dest ram /tmp diff --git a/target/linux/at91/config/default b/target/linux/at91/config/default new file mode 100644 index 0000000..5e74bd6 --- /dev/null +++ b/target/linux/at91/config/default @@ -0,0 +1,305 @@ +# CONFIG_AEABI is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARM=y +CONFIG_ARM_AT91_ETHER=y +CONFIG_ARM_THUMB=y +# CONFIG_ARPD is not set +# CONFIG_ARTHUR is not set +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_SPI=y +# CONFIG_AT91_SPIDEV is not set +# CONFIG_ATMEL_TCLIB is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BINFMT_AOUT is not set +CONFIG_BITREVERSE=y +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BONDING is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_BT is not set +# CONFIG_CIFS_STATS is not set +# CONFIG_CLS_U32_MARK is not set +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_CPU_32=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_TLB_V4WBI=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_WP512 is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DM9000 is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FIXED_PHY is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +CONFIG_FRAME_POINTER=y +CONFIG_FS_POSIX_ACL=y +CONFIG_FW_LOADER=m +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HID=y +CONFIG_HW_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_I2C is not set +# CONFIG_IKCONFIG is not set +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=y +# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_LEDS_TIMER=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_LIBCRC32C is not set +# CONFIG_LLC2 is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_CHUB is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_ONEARM is not set +# CONFIG_MACH_PICOTUX2XX is not set +CONFIG_MMC=m +CONFIG_MMC_AT91=m +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_AT91_DATAFLASH=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DATAFLASH26 is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ROOTFS_ROOT_DEV is not set +# CONFIG_MTD_ROOTFS_SPLIT is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_NETDEV_1000=y +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_NET_PKTGEN is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_NO_IOPORT is not set +# CONFIG_NVRAM is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_PHYLIB=y +# CONFIG_PNPACPI is not set +# CONFIG_PPPOATM is not set +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_ROMFS_FS is not set +CONFIG_RTC_LIB=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIO=y +# CONFIG_SERIO_LIBPS2 is not set +CONFIG_SERIO_RAW=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SMC91X is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_SOUND is not set +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_TICK_ONESHOT is not set +CONFIG_UID16=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_ATM is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_LIBUSUAL=y +CONFIG_USB_MON=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_USBNET_MII is not set +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VGASTATE is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_WATCHDOG is not set +# CONFIG_XIP_KERNEL is not set +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/target/linux/at91/files/drivers/mtd/at91part.c b/target/linux/at91/files/drivers/mtd/at91part.c new file mode 100644 index 0000000..bfa9590 --- /dev/null +++ b/target/linux/at91/files/drivers/mtd/at91part.c @@ -0,0 +1,121 @@ +/* + * $Id: at91part.c 6948 2007-04-15 04:01:45Z hcg $ + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Atmel AT91 flash partition table. (Modified by Hamish Guthrie). + * Based on ar7 map by Felix Fietkau. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/bootmem.h> +#include <linux/squashfs_fs.h> + +static struct mtd_partition at91_parts[6]; + +static int create_mtd_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + unsigned long origin) +{ + unsigned int offset, len; + unsigned int pre_size = 0x42000, root_max = 0x362400; + unsigned char buf[512]; + struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; + + printk("Parsing AT91 partition map...\n"); + + at91_parts[0].name = "loaders"; + at91_parts[0].offset = 0; + at91_parts[0].size = 0x21000; + at91_parts[0].mask_flags = MTD_WRITEABLE; + + at91_parts[1].name = "ubparams"; + at91_parts[1].offset = 0x21000; + at91_parts[1].size = 0x8400; + at91_parts[1].mask_flags = 0; + + at91_parts[2].name = "kernel"; + at91_parts[2].offset = pre_size; + at91_parts[2].size = 0; + at91_parts[2].mask_flags = 0; + + at91_parts[3].name = "rootfs"; + at91_parts[3].offset = 0; + at91_parts[3].size = 0; + at91_parts[3].mask_flags = 0; + + for(offset = pre_size; offset < root_max; offset += master->erasesize) { + + memset(&buf, 0xe5, sizeof(buf)); + + if (master->read(master, offset, sizeof(buf), &len, buf) || len != sizeof(buf)) + break; + + if (*((__u32 *) buf) == SQUASHFS_MAGIC) { + printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", + master->name, (u32) sb->bytes_used); + + at91_parts[3].size = sb->bytes_used; + at91_parts[3].offset = offset; + len = at91_parts[3].offset + at91_parts[3].size; + len = ((len / (master->erasesize * 8)) + 1) * master->erasesize * 8; + at91_parts[3].size = len - at91_parts[3].offset; + at91_parts[2].size = offset - at91_parts[2].offset; + break; + } + } + + if (at91_parts[3].size == 0) { + printk(KERN_NOTICE "%s: Couldn't find root filesystem\n", master->name); + return -1; + } + + at91_parts[4].name = "rootfs_data"; + at91_parts[4].offset = root_max; + at91_parts[4].size = master->size - root_max; + at91_parts[4].mask_flags = 0; + + at91_parts[5].name = "complete"; + at91_parts[5].offset = 0; + at91_parts[5].size = master->size; + at91_parts[5].mask_flags = 0; + + *pparts = at91_parts; + return 6; +} + +static struct mtd_part_parser at91_parser = { + .owner = THIS_MODULE, + .parse_fn = create_mtd_partitions, + .name = "at91part", +}; + +static int __init at91_parser_init(void) +{ + return register_mtd_parser(&at91_parser); +} + +module_init(at91_parser_init); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Felix Fietkau, Eugene Konev, Hamish Guthrie"); +MODULE_DESCRIPTION("MTD partitioning for Atmel at91"); diff --git a/target/linux/at91/image/Config.in b/target/linux/at91/image/Config.in new file mode 100644 index 0000000..6607f6c --- /dev/null +++ b/target/linux/at91/image/Config.in @@ -0,0 +1,35 @@ +config AT91_DFBOOT + bool "Build dataflashboot loader" + depends LINUX_2_6_AT91 + default y + +config AT91_UBOOT + bool "Build u-boot loader" + depends LINUX_2_6_AT91 + default y + +config UBOOT_TARGET + string "U-Boot Board Configuration" + depends LINUX_2_6_AT91 + depends AT91_UBOOT + default "vlink" + help + For all supported boards there are ready-to-use default + configurations available; just type "<board_name>". + +config UBOOT_IPADDR + string "IP Address for U-Boot" + depends LINUX_2_6_AT91 + depends AT91_UBOOT + default "192.168.0.178" + help + IP address of device to be used in U-Boot + +config UBOOT_SERVERIP + string "IP Address of TFTP server" + depends LINUX_2_6_AT91 + depends AT91_UBOOT + default "192.168.0.232" + help + IP address of TFTP server for U-Boot + diff --git a/target/linux/at91/image/Makefile b/target/linux/at91/image/Makefile new file mode 100644 index 0000000..7e855f0 --- /dev/null +++ b/target/linux/at91/image/Makefile @@ -0,0 +1,45 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Build/Clean + $(MAKE) -C dfboot clean + $(MAKE) -C u-boot clean +endef + +define Build/Compile + $(MAKE) -C dfboot compile + $(MAKE) -C u-boot compile + $(KDIR)/u-boot-1.1.4/tools/ubparams + cp params $(KDIR) +endef + +define Image/Prepare + cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage + cp $(KDIR)/dfboot/dfboot.bin $(KDIR)/dfboot.bin + cp $(KDIR)/dfboot/dfbptest.bin $(KDIR)/dfbptest.bin + cp $(KDIR)/u-boot-1.1.4/u-boot.bin $(KDIR)/u-boot.bin + dd if=$(KDIR)/u-boot.bin of=$(KDIR)/u-boot.block bs=100k count=1 conv=sync + cat $(KDIR)/u-boot.block $(KDIR)/params > $(KDIR)/u-boot.full +endef + +define Image/BuildKernel + cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage +endef + +define Image/Build + dd if=$(KDIR)/uImage of=$(KDIR)/uImage.block bs=8448 conv=sync + dd if=$(KDIR)/root.squashfs of=$(KDIR)/root.block bs=8448 conv=sync + cat $(KDIR)/uImage.block $(KDIR)/root.block > $(KDIR)/knlroot.bin + $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).trx -f $(KDIR)/dfboot.bin -f$(KDIR)/u-boot.full -f$(KDIR)/knlroot.bin + cp $(KDIR)/dfbptest.bin $(BIN_DIR) + $(call Image/Build/$(1),$(1)) +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/at91/image/dfboot/Makefile b/target/linux/at91/image/dfboot/Makefile new file mode 100644 index 0000000..355a4b5 --- /dev/null +++ b/target/linux/at91/image/dfboot/Makefile @@ -0,0 +1,35 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/kernel.mk + +PKG_NAME:=dfboot +PKG_VERSION:=0.1 +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME) + +include $(INCLUDE_DIR)/package.mk + +define Build/Prepare + mkdir -p $(PKG_BUILD_DIR) + $(CP) ./src/* $(PKG_BUILD_DIR)/ +endef + +define Build/Compile + $(MAKE) -C $(PKG_BUILD_DIR) \ + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS)" +endef + +define Build/InstallDev + dd if=$(PKG_BUILD_DIR)/binary/dfboot.bin of=$(PKG_BUILD_DIR)/binary/dfboot.block bs=32k count=1 conv=sync +endef + +$(eval $(call Build/DefaultTargets)) diff --git a/target/linux/at91/image/dfboot/src/Makefile b/target/linux/at91/image/dfboot/src/Makefile new file mode 100644 index 0000000..ff92e0d --- /dev/null +++ b/target/linux/at91/image/dfboot/src/Makefile @@ -0,0 +1,94 @@ +# Makefile for DataFlashBoot.bin +# Must use toolchain with H/W FLoating Point + +BASENAME=dfboot +BINNAME=$(BASENAME).bin +OUTNAME=$(BASENAME).out +LSSNAME=$(BASENAME).lss +MAPNAME=$(BASENAME).map + +BASENAME2=dfbptest +BINNAME2=$(BASENAME2).bin +OUTNAME2=$(BASENAME2).out +LSSNAME2=$(BASENAME2).lss +MAPNAME2=$(BASENAME2).map + +INCPATH=include + +CFLAGS_LOCAL=-Os -Wall -I$(INCPATH) +BUILD=$(CC) $(CFLAGS) $(CFLAGS_LOCAL) + +LDFLAGS+=-T elf32-littlearm.lds -Ttext 0 +LINK=$(LD) $(LDFLAGS) + +OBJS=objs/cstartup_ram.o objs/at45.o objs/com.o objs/dataflash.o\ + objs/div0.o objs/init.o objs/main.o objs/asm_isr.o objs/asm_mci_isr.o\ + objs/mci_device.o objs/jump.o objs/_udivsi3.o objs/_umodsi3.o + +OBJS2=objs/cstartup_ram.o objs/at45.o objs/com.o objs/dataflash.o\ + objs/div0.o objs/init.o objs/ptmain.o objs/asm_isr.o objs/asm_mci_isr.o\ + objs/mci_device.o objs/jump.o objs/_udivsi3.o objs/_umodsi3.o + +I=config.h com.h dataflash.h embedded_services.h main.h stdio.h include/AT91RM9200.h include/lib_AT91RM9200.h + +all:clean $(BASENAME) $(BASENAME2) + +$(BASENAME): $(OBJS) + $(LINK) -n -o $(OUTNAME) $(OBJS) + $(OBJCOPY) $(OUTNAME) -O binary $(BINNAME) + $(OBJDUMP) -h -s $(OUTNAME) > $(LSSNAME) + $(NM) -n $(OUTNAME) | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(MAPNAME) + cp $(BINNAME) binary + +$(BASENAME2): $(OBJS2) + $(LINK) -n -o $(OUTNAME2) $(OBJS2) + $(OBJCOPY) $(OUTNAME2) -O binary $(BINNAME2) + $(OBJDUMP) -h -s $(OUTNAME2) > $(LSSNAME2) + $(NM) -n $(OUTNAME2) | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(MAPNAME2) + cp $(BINNAME2) binary + +# C objects here +objs/at45.o: at45.c $(I) + $(BUILD) -c -o objs/at45.o at45.c +objs/com.o: com.c $(I) + $(BUILD) -c -o objs/com.o com.c +objs/dataflash.o: dataflash.c $(I) + $(BUILD) -c -o objs/dataflash.o dataflash.c +objs/mci_device.o: mci_device.c $(I) + $(BUILD) -c -o objs/mci_device.o mci_device.c +objs/div0.o: div0.c $(I) + $(BUILD) -c -o objs/div0.o div0.c +objs/init.o: init.c $(I) + $(BUILD) -c -o objs/init.o init.c +objs/main.o: main.c $(I) + $(BUILD) -c -o objs/main.o main.c +objs/ptmain.o: main.c $(I) + $(BUILD) -c -D PRODTEST -o objs/ptmain.o main.c + +# ASM objects here +objs/asm_isr.o: asm_isr.S + $(BUILD) -c -o objs/asm_isr.o asm_isr.S +objs/asm_mci_isr.o: asm_mci_isr.S + $(BUILD) -c -o objs/asm_mci_isr.o asm_mci_isr.S +objs/cstartup_ram.o: cstartup_ram.S + $(BUILD) -c -o objs/cstartup_ram.o cstartup_ram.S +objs/jump.o: jump.S + $(BUILD) -c -o objs/jump.o jump.S +objs/_udivsi3.o: _udivsi3.S + $(BUILD) -c -o objs/_udivsi3.o _udivsi3.S +objs/_umodsi3.o: _umodsi3.S + $(BUILD) -c -o objs/_umodsi3.o _umodsi3.S + +install: $(BINNAME) $(BINNAME2) + cp $(BINNAME) binary + cp $(BINNAME2) binary + +clean: + rm -f *~ + rm -f objs/* + rm -f *.out + rm -f *.bin + rm -f *.lss + rm -f *.map + rm -f .unpacked + mkdir -p objs diff --git a/target/linux/at91/image/dfboot/src/_udivsi3.S b/target/linux/at91/image/dfboot/src/_udivsi3.S new file mode 100644 index 0000000..2cdcd48 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/_udivsi3.S @@ -0,0 +1,77 @@ +/* # 1 "libgcc1.S" */ +@ libgcc1 routines for ARM cpu. +@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) +dividend .req r0 +divisor .req r1 +result .req r2 +curbit .req r3 +/* ip .req r12 */ +/* sp .req r13 */ +/* lr .req r14 */ +/* pc .req r15 */ + .text + .globl __udivsi3 + .type __udivsi3 ,function + .align 0 + __udivsi3 : + cmp divisor, #0 + beq Ldiv0 + mov curbit, #1 + mov result, #0 + cmp dividend, divisor + bcc Lgot_result +Loop1: + @ Unless the divisor is very big, shift it up in multiples of + @ four bits, since this is the amount of unwinding in the main + @ division loop. Continue shifting until the divisor is + @ larger than the dividend. + cmp divisor, #0x10000000 + cmpcc divisor, dividend + movcc divisor, divisor, lsl #4 + movcc curbit, curbit, lsl #4 + bcc Loop1 +Lbignum: + @ For very big divisors, we must shift it a bit at a time, or + @ we will be in danger of overflowing. + cmp divisor, #0x80000000 + cmpcc divisor, dividend + movcc divisor, divisor, lsl #1 + movcc curbit, curbit, lsl #1 + bcc Lbignum +Loop3: + @ Test for possible subtractions, and note which bits + @ are done in the result. On the final pass, this may subtract + @ too much from the dividend, but the result will be ok, since the + @ "bit" will have been shifted out at the bottom. + cmp dividend, divisor + subcs dividend, dividend, divisor + orrcs result, result, curbit + cmp dividend, divisor, lsr #1 + subcs dividend, dividend, divisor, lsr #1 + orrcs result, result, curbit, lsr #1 + cmp dividend, divisor, lsr #2 + subcs dividend, dividend, divisor, lsr #2 + orrcs result, result, curbit, lsr #2 + cmp dividend, divisor, lsr #3 + subcs dividend, dividend, divisor, lsr #3 + orrcs result, result, curbit, lsr #3 + cmp dividend, #0 @ Early termination? + movnes curbit, curbit, lsr #4 @ No, any more bits to do? + movne divisor, divisor, lsr #4 + bne Loop3 +Lgot_result: + mov r0, result + mov pc, lr +Ldiv0: + str lr, [sp, #-4]! + bl __div0 (PLT) + mov r0, #0 @ about as wrong as it could be + ldmia sp!, {pc} + .size __udivsi3 , . - __udivsi3 +/* # 235 "libgcc1.S" */ +/* # 320 "libgcc1.S" */ +/* # 421 "libgcc1.S" */ +/* # 433 "libgcc1.S" */ +/* # 456 "libgcc1.S" */ +/* # 500 "libgcc1.S" */ +/* # 580 "libgcc1.S" */ diff --git a/target/linux/at91/image/dfboot/src/_umodsi3.S b/target/linux/at91/image/dfboot/src/_umodsi3.S new file mode 100644 index 0000000..e4aebe8 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/_umodsi3.S @@ -0,0 +1,88 @@ +/* # 1 "libgcc1.S" */ +@ libgcc1 routines for ARM cpu. +@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) +/* # 145 "libgcc1.S" */ +dividend .req r0 +divisor .req r1 +overdone .req r2 +curbit .req r3 +/* ip .req r12 */ +/* sp .req r13 */ +/* lr .req r14 */ +/* pc .req r15 */ + .text + .globl __umodsi3 + .type __umodsi3 ,function + .align 0 + __umodsi3 : + cmp divisor, #0 + beq Ldiv0 + mov curbit, #1 + cmp dividend, divisor + movcc pc, lr +Loop1: + @ Unless the divisor is very big, shift it up in multiples of + @ four bits, since this is the amount of unwinding in the main + @ division loop. Continue shifting until the divisor is + @ larger than the dividend. + cmp divisor, #0x10000000 + cmpcc divisor, dividend + movcc divisor, divisor, lsl #4 + movcc curbit, curbit, lsl #4 + bcc Loop1 +Lbignum: + @ For very big divisors, we must shift it a bit at a time, or + @ we will be in danger of overflowing. + cmp divisor, #0x80000000 + cmpcc divisor, dividend + movcc divisor, divisor, lsl #1 + movcc curbit, curbit, lsl #1 + bcc Lbignum +Loop3: + @ Test for possible subtractions. On the final pass, this may + @ subtract too much from the dividend, so keep track of which + @ subtractions are done, we can fix them up afterwards... + mov overdone, #0 + cmp dividend, divisor + subcs dividend, dividend, divisor + cmp dividend, divisor, lsr #1 + subcs dividend, dividend, divisor, lsr #1 + orrcs overdone, overdone, curbit, ror #1 + cmp dividend, divisor, lsr #2 + subcs dividend, dividend, divisor, lsr #2 + orrcs overdone, overdone, curbit, ror #2 + cmp dividend, divisor, lsr #3 + subcs dividend, dividend, divisor, lsr #3 + orrcs overdone, overdone, curbit, ror #3 + mov ip, curbit + cmp dividend, #0 @ Early termination? + movnes curbit, curbit, lsr #4 @ No, any more bits to do? + movne divisor, divisor, lsr #4 + bne Loop3 + @ Any subtractions that we should not have done will be recorded in + @ the top three bits of "overdone". Exactly which were not needed + @ are governed by the position of the bit, stored in ip. + @ If we terminated early, because dividend became zero, + @ then none of the below will match, since the bit in ip will not be + @ in the bottom nibble. + ands overdone, overdone, #0xe0000000 + moveq pc, lr @ No fixups needed + tst overdone, ip, ror #3 + addne dividend, dividend, divisor, lsr #3 + tst overdone, ip, ror #2 + addne dividend, dividend, divisor, lsr #2 + tst overdone, ip, ror #1 + addne dividend, dividend, divisor, lsr #1 + mov pc, lr +Ldiv0: + str lr, [sp, #-4]! + bl __div0 (PLT) + mov r0, #0 @ about as wrong as it could be + ldmia sp!, {pc} + .size __umodsi3 , . - __umodsi3 +/* # 320 "libgcc1.S" */ +/* # 421 "libgcc1.S" */ +/* # 433 "libgcc1.S" */ +/* # 456 "libgcc1.S" */ +/* # 500 "libgcc1.S" */ +/* # 580 "libgcc1.S" */ diff --git a/target/linux/at91/image/dfboot/src/asm_isr.S b/target/linux/at91/image/dfboot/src/asm_isr.S new file mode 100644 index 0000000..8d1d52e --- /dev/null +++ b/target/linux/at91/image/dfboot/src/asm_isr.S @@ -0,0 +1,75 @@ +#include "AT91RM9200_inc.h" + +#define ARM_MODE_USER 0x10 +#define ARM_MODE_FIQ 0x11 +#define ARM_MODE_IRQ 0x12 +#define ARM_MODE_SVC 0x13 +#define ARM_MODE_ABORT 0x17 +#define ARM_MODE_UNDEF 0x1B +#define ARM_MODE_SYS 0x1F + +#define I_BIT 0x80 +#define F_BIT 0x40 +#define T_BIT 0x20 + + +/* ----------------------------------------------------------------------------- + AT91F_ASM_SPI_Handler + --------------------- + Handler called by the AIC + + Save context + Call C handler + Restore context + ----------------------------------------------------------------------------- */ + +.global AT91F_ST_ASM_HANDLER + +AT91F_ST_ASM_HANDLER: +/* Adjust and save LR_irq in IRQ stack */ + sub r14, r14, #4 + stmfd sp!, {r14} + +/* Write in the IVR to support Protect Mode + No effect in Normal Mode + De-assert the NIRQ and clear the source in Protect Mode */ + ldr r14, =AT91C_BASE_AIC + str r14, [r14, #AIC_IVR] + +/* Save SPSR and r0 in IRQ stack */ + mrs r14, SPSR + stmfd sp!, {r0, r14} + +/* Enable Interrupt and Switch in SYS Mode */ + mrs r0, CPSR + bic r0, r0, #I_BIT + orr r0, r0, #ARM_MODE_SYS + msr CPSR_c, r0 + +/* Save scratch/used registers and LR in User Stack */ + stmfd sp!, { r1-r3, r12, r14} + + ldr r1, =AT91F_ST_HANDLER + mov r14, pc + bx r1 + +/* Restore scratch/used registers and LR from User Stack */ + ldmia sp!, { r1-r3, r12, r14} + +/* Disable Interrupt and switch back in IRQ mode */ + mrs r0, CPSR + bic r0, r0, #ARM_MODE_SYS + orr r0, r0, #I_BIT | ARM_MODE_IRQ + msr CPSR_c, r0 + +/* Mark the End of Interrupt on the AIC */ + ldr r0, =AT91C_BASE_AIC + str r0, [r0, #AIC_EOICR] + +/* Restore SPSR_irq and r0 from IRQ stack */ + ldmia sp!, {r0, r14} + msr SPSR_cxsf, r14 + +/* Restore adjusted LR_irq from IRQ stack directly in the PC */ + ldmia sp!, {pc}^ + diff --git a/target/linux/at91/image/dfboot/src/asm_mci_isr.S b/target/linux/at91/image/dfboot/src/asm_mci_isr.S new file mode 100644 index 0000000..0f66fc0 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/asm_mci_isr.S @@ -0,0 +1,75 @@ +#include <AT91RM9200_inc.h> + +#define ARM_MODE_USER 0x10 +#define ARM_MODE_FIQ 0x11 +#define ARM_MODE_IRQ 0x12 +#define ARM_MODE_SVC 0x13 +#define ARM_MODE_ABORT 0x17 +#define ARM_MODE_UNDEF 0x1B +#define ARM_MODE_SYS 0x1F + +#define I_BIT 0x80 +#define F_BIT 0x40 +#define T_BIT 0x20 + + +/* ----------------------------------------------------------------------------- + AT91F_ASM_MCI_Handler + --------------------- + Handler called by the AIC + + Save context + Call C handler + Restore context + ----------------------------------------------------------------------------- */ + +.global AT91F_ASM_MCI_Handler + +AT91F_ASM_MCI_Handler: +/* Adjust and save LR_irq in IRQ stack */ + sub r14, r14, #4 + stmfd sp!, {r14} + +/* Write in the IVR to support Protect Mode + No effect in Normal Mode + De-assert the NIRQ and clear the source in Protect Mode */ + ldr r14, =AT91C_BASE_AIC + str r14, [r14, #AIC_IVR] + +/* Save SPSR and r0 in IRQ stack */ + mrs r14, SPSR + stmfd sp!, {r0, r14} + +/* Enable Interrupt and Switch in SYS Mode */ + mrs r0, CPSR + bic r0, r0, #I_BIT + orr r0, r0, #ARM_MODE_SYS + msr CPSR_c, r0 + +/* Save scratch/used registers and LR in User Stack */ + stmfd sp!, { r1-r3, r12, r14} + + ldr r1, =AT91F_MCI_Handler + mov r14, pc + bx r1 + +/* Restore scratch/used registers and LR from User Stack */ + ldmia sp!, { r1-r3, r12, r14} + +/* Disable Interrupt and switch back in IRQ mode */ + mrs r0, CPSR + bic r0, r0, #ARM_MODE_SYS + orr r0, r0, #I_BIT | ARM_MODE_IRQ + msr CPSR_c, r0 + +/* Mark the End of Interrupt on the AIC */ + ldr r0, =AT91C_BASE_AIC + str r0, [r0, #AIC_EOICR] + +/* Restore SPSR_irq and r0 from IRQ stack */ + ldmia sp!, {r0, r14} + msr SPSR_cxsf, r14 + +/* Restore adjusted LR_irq from IRQ stack directly in the PC */ + ldmia sp!, {pc}^ + diff --git a/target/linux/at91/image/dfboot/src/at45.c b/target/linux/at91/image/dfboot/src/at45.c new file mode 100644 index 0000000..8830d7e --- /dev/null +++ b/target/linux/at91/image/dfboot/src/at45.c @@ -0,0 +1,595 @@ +/*---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + *---------------------------------------------------------------------------- + * The software is delivered "AS IS" without warranty or condition of any + * kind, either express, implied or statutory. This includes without + * limitation any warranty or condition with respect to merchantability or + * fitness for any particular purpose, or against the infringements of + * intellectual property rights of others. + *---------------------------------------------------------------------------- + * File Name : at45c.h + * Object : + * + * 1.0 10/12/03 HIi : Creation. + * 1.01 03/05/04 HIi : Bug Fix in AT91F_DataFlashWaitReady() Function. + *---------------------------------------------------------------------------- + */ +#include "config.h" +#include "stdio.h" +#include "AT91RM9200.h" +#include "lib_AT91RM9200.h" +#include "dataflash.h" +#include "main.h" + + +/*----------------------------------------------------------------------------*/ +/* \fn AT91F_SpiInit */ +/* \brief SPI Low level Init */ +/*----------------------------------------------------------------------------*/ +void AT91F_SpiInit(void) { + /* Configure PIOs */ + AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | + AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | + AT91C_PA6_NPCS3 | AT91C_PA0_MISO | + AT91C_PA2_SPCK; + AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | + AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | + AT91C_PA6_NPCS3 | AT91C_PA0_MISO | + AT91C_PA2_SPCK; + /* Enable CLock */ + AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI; + + /* Reset the SPI */ + AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST; + + /* Configure SPI in Master Mode with No CS selected !!! */ + AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; + + /* Configure CS0 and CS3 */ + *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); + *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); +} + + +/*----------------------------------------------------------------------------*/ +/* \fn AT91F_SpiEnable */ +/* \brief Enable SPI chip select */ +/*----------------------------------------------------------------------------*/ +static void AT91F_SpiEnable(int cs) { + switch(cs) { + case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ + AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; + AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH << 16) & AT91C_SPI_PCS); + break; + case 3: /* Configure SPI CS3 for Serial DataFlash Card */ + /* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */ + AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7; /* Set in PIO mode */ + AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7; /* Configure in output */ + /* Clear Output */ + AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7; + /* Configure PCS */ + AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; + AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); + break; + } + + /* SPI_Enable */ + AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; +} + +/*----------------------------------------------------------------------------*/ +/* \fn AT91F_SpiWrite */ +/* \brief Set the PDC registers for a transfert */ +/*----------------------------------------------------------------------------*/ +static unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) +{ + unsigned int timeout; + + AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; + + /* Initialize the Transmit and Receive Pointer */ + AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ; + AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ; + + /* Intialize the Transmit and Receive Counters */ + AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size; + AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size; + + if ( pDesc->tx_data_size != 0 ) { + /* Initialize the Next Transmit and Next Receive Pointer */ + AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ; + AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ; + + /* Intialize the Next Transmit and Next Receive Counters */ + AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ; + AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ; + } + + /* ARM simple, non interrupt dependent timer */ + timeout = 0; + + AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; + while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF)); + + AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; + + if (timeout >= AT91C_DATAFLASH_TIMEOUT){ + return AT91C_DATAFLASH_ERROR; + } + + return AT91C_DATAFLASH_OK; +} + + +/*----------------------------------------------------------------------*/ +/* \fn AT91F_DataFlashSendCommand */ +/* \brief Generic function to send a command to the dataflash */ +/*----------------------------------------------------------------------*/ +static AT91S_DataFlashStatus AT91F_DataFlashSendCommand( + AT91PS_DataFlash pDataFlash, + unsigned char OpCode, + unsigned int CmdSize, + unsigned int DataflashAddress) +{ + unsigned int adr; + + /* process the address to obtain page address and byte address */ + adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) + << pDataFlash->pDevice->page_offset) + + (DataflashAddress % (pDataFlash->pDevice->pages_size)); + + /* fill the command buffer */ + pDataFlash->pDataFlashDesc->command[0] = OpCode; + if (pDataFlash->pDevice->pages_number >= 16384) + { + pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24); + pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16); + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8); + pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF); + } + else + { + pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16); + pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8); + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ; + pDataFlash->pDataFlashDesc->command[4] = 0; + } + pDataFlash->pDataFlashDesc->command[5] = 0; + pDataFlash->pDataFlashDesc->command[6] = 0; + pDataFlash->pDataFlashDesc->command[7] = 0; + + /* Initialize the SpiData structure for the spi write fuction */ + pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; + pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize ; + pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; + pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize ; + + return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); +} + + +/*----------------------------------------------------------------------*/ +/* \fn AT91F_DataFlashGetStatus */ +/* \brief Read the status register of the dataflash */ +/*----------------------------------------------------------------------*/ +static AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) +{ + AT91S_DataFlashStatus status; + + /* first send the read status command (D7H) */ + pDesc->command[0] = DB_STATUS; + pDesc->command[1] = 0; + + pDesc->DataFlash_state = GET_STATUS; + pDesc->tx_data_size = 0 ; /* Transmit the command and receive response */ + pDesc->tx_cmd_pt = pDesc->command ; + pDesc->rx_cmd_pt = pDesc->command ; + pDesc->rx_cmd_size = 2 ; + pDesc->tx_cmd_size = 2 ; + status = AT91F_SpiWrite (pDesc); + + pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1); + return status; +} + +/*----------------------------------------------------------------------------- + * Function Name : AT91F_DataFlashWaitReady + * Object : wait for dataflash ready (bit7 of the status register == 1) + * Input Parameters : DataFlash Service and timeout + * Return value : DataFlash status "ready or not" + *----------------------------------------------------------------------------- + */ +static AT91S_DataFlashStatus AT91F_DataFlashWaitReady( + AT91PS_DataflashDesc pDataFlashDesc, + unsigned int timeout) +{ + pDataFlashDesc->DataFlash_state = IDLE; + do { + AT91F_DataFlashGetStatus(pDataFlashDesc); + timeout--; + } + while(((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0)); + + if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) + return AT91C_DATAFLASH_ERROR; + + return AT91C_DATAFLASH_OK; +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataFlashContinuousRead */ +/* Object : Continuous stream Read */ +/* Input Parameters : DataFlash Service */ +/* : <src> = dataflash address */ +/* : <*dataBuffer> = data buffer pointer */ +/* : <sizeToRead> = data buffer size */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +static AT91S_DataFlashStatus AT91F_DataFlashContinuousRead( + AT91PS_DataFlash pDataFlash, + int src, + unsigned char *dataBuffer, + int sizeToRead ) +{ + AT91S_DataFlashStatus status; + /* Test the size to read in the device */ + if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) + return AT91C_DATAFLASH_MEMORY_OVERFLOW; + + pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; + pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead; + pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; + pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead; + + status = AT91F_DataFlashSendCommand(pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); + /* Send the command to the dataflash */ + return(status); +} + + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_MainMemoryToBufferTransfer */ +/* Object : Read a page in the SRAM Buffer 1 or 2 */ +/* Input Parameters : DataFlash Service */ +/* : Page concerned */ +/* : */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +static AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfer( + AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned int page) +{ + int cmdsize; + /* Test if the buffer command is legal */ + if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF)) + return AT91C_DATAFLASH_BAD_COMMAND; + + /* no data to transmit or receive */ + pDataFlash->pDataFlashDesc->tx_data_size = 0; + cmdsize = 4; + if (pDataFlash->pDevice->pages_number >= 16384) + cmdsize = 5; + return(AT91F_DataFlashSendCommand(pDataFlash, BufferCommand, cmdsize, + page*pDataFlash->pDevice->pages_size)); +} + + + +/*----------------------------------------------------------------------------- */ +/* Function Name : AT91F_DataFlashWriteBuffer */ +/* Object : Write data to the internal sram buffer 1 or 2 */ +/* Input Parameters : DataFlash Service */ +/* : <BufferCommand> = command to write buffer1 or buffer2 */ +/* : <*dataBuffer> = data buffer to write */ +/* : <bufferAddress> = address in the internal buffer */ +/* : <SizeToWrite> = data buffer size */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +static AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer( + AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned char *dataBuffer, + unsigned int bufferAddress, + int SizeToWrite ) +{ + int cmdsize; + /* Test if the buffer command is legal */ + if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE)) + return AT91C_DATAFLASH_BAD_COMMAND; + + /* buffer address must be lower than page size */ + if (bufferAddress > pDataFlash->pDevice->pages_size) + return AT91C_DATAFLASH_BAD_ADDRESS; + + /* Send first Write Command */ + pDataFlash->pDataFlashDesc->command[0] = BufferCommand; + pDataFlash->pDataFlashDesc->command[1] = 0; + if (pDataFlash->pDevice->pages_number >= 16384) + { + pDataFlash->pDataFlashDesc->command[2] = 0; + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; + pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; + cmdsize = 5; + } + else + { + pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; + pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; + pDataFlash->pDataFlashDesc->command[4] = 0; + cmdsize = 4; + } + + pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; + pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ; + pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; + pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ; + + pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer ; + pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer ; + pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite ; + pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; + + return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_PageErase */ +/* Object : Read a page in the SRAM Buffer 1 or 2 */ +/* Input Parameters : DataFlash Service */ +/* : Page concerned */ +/* : */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +static AT91S_DataFlashStatus AT91F_PageErase( + AT91PS_DataFlash pDataFlash, + unsigned int page) +{ + int cmdsize; + /* Test if the buffer command is legal */ + /* no data to transmit or receive */ + pDataFlash->pDataFlashDesc->tx_data_size = 0; + + cmdsize = 4; + if (pDataFlash->pDevice->pages_number >= 16384) + cmdsize = 5; + return(AT91F_DataFlashSendCommand(pDataFlash, DB_PAGE_ERASE, cmdsize, + page*pDataFlash->pDevice->pages_size)); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_WriteBufferToMain */ +/* Object : Write buffer to the main memory */ +/* Input Parameters : DataFlash Service */ +/* : <BufferCommand> = command to send to buf1 or buf2 */ +/* : <dest> = main memory address */ +/* Return value : State of the dataflash */ +/*------------------------------------------------------------------------------*/ +static AT91S_DataFlashStatus AT91F_WriteBufferToMain ( + AT91PS_DataFlash pDataFlash, + unsigned char BufferCommand, + unsigned int dest ) +{ + int cmdsize; + /* Test if the buffer command is correct */ + if ((BufferCommand != DB_BUF1_PAGE_PGM) && + (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && + (BufferCommand != DB_BUF2_PAGE_PGM) && + (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) ) + return AT91C_DATAFLASH_BAD_COMMAND; + + /* no data to transmit or receive */ + pDataFlash->pDataFlashDesc->tx_data_size = 0; + + cmdsize = 4; + if (pDataFlash->pDevice->pages_number >= 16384) + cmdsize = 5; + /* Send the command to the dataflash */ + return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest)); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_PartialPageWrite */ +/* Object : Erase partially a page */ +/* Input Parameters : <page> = page number */ +/* : <AdrInpage> = adr to begin the fading */ +/* : <length> = Number of bytes to erase */ +/*------------------------------------------------------------------------------*/ +static AT91S_DataFlashStatus AT91F_PartialPageWrite ( + AT91PS_DataFlash pDataFlash, + unsigned char *src, + unsigned int dest, + unsigned int size) +{ + unsigned int page; + unsigned int AdrInPage; + + page = dest / (pDataFlash->pDevice->pages_size); + AdrInPage = dest % (pDataFlash->pDevice->pages_size); + + /* Read the contents of the page in the Sram Buffer */ + AT91F_MainMemoryToBufferTransfer(pDataFlash, DB_PAGE_2_BUF1_TRF, page); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + + /*Update the SRAM buffer */ + AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + + /* Erase page if a 128 Mbits device */ + if (pDataFlash->pDevice->pages_number >= 16384) + { + AT91F_PageErase(pDataFlash, page); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + } + + /* Rewrite the modified Sram Buffer in the main memory */ + return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, + (page*pDataFlash->pDevice->pages_size))); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataFlashWrite */ +/* Object : */ +/* Input Parameters : <*src> = Source buffer */ +/* : <dest> = dataflash adress */ +/* : <size> = data buffer size */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashWrite( + AT91PS_DataFlash pDataFlash, + unsigned char *src, + int dest, + int size ) +{ + unsigned int length; + unsigned int page; + unsigned int status; + + AT91F_SpiEnable(pDataFlash->pDevice->cs); + + if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) + return AT91C_DATAFLASH_MEMORY_OVERFLOW; + + /* If destination does not fit a page start address */ + if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) { + length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size))); + + if (size < length) + length = size; + + if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length)) + return AT91C_DATAFLASH_ERROR; + + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + + /* Update size, source and destination pointers */ + size -= length; + dest += length; + src += length; + } + + while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) + { + /* program dataflash page */ + page = (unsigned int)dest / (pDataFlash->pDevice->pages_size); + + status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, + 0, pDataFlash->pDevice->pages_size); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + + status = AT91F_PageErase(pDataFlash, page); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + if (!status) + return AT91C_DATAFLASH_ERROR; + + status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest); + if(!status) + return AT91C_DATAFLASH_ERROR; + + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + + /* Update size, source and destination pointers */ + size -= pDataFlash->pDevice->pages_size ; + dest += pDataFlash->pDevice->pages_size ; + src += pDataFlash->pDevice->pages_size ; + } + + /* If still some bytes to read */ + if ( size > 0 ) { + /* program dataflash page */ + if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) ) + return AT91C_DATAFLASH_ERROR; + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + } + return AT91C_DATAFLASH_OK; +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataFlashRead */ +/* Object : Read a block in dataflash */ +/* Input Parameters : */ +/* Return value : */ +/*------------------------------------------------------------------------------*/ +int AT91F_DataFlashRead( + AT91PS_DataFlash pDataFlash, + unsigned long addr, + unsigned long size, + char *buffer) +{ + unsigned long SizeToRead; + + AT91F_SpiEnable(pDataFlash->pDevice->cs); + + if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT) != AT91C_DATAFLASH_OK) + return -1; + + while (size) + { + SizeToRead = (size < 0x8000)? size:0x8000; + + if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT) + != AT91C_DATAFLASH_OK) + return -1; + + if (AT91F_DataFlashContinuousRead (pDataFlash, addr, (unsigned char *)buffer, + SizeToRead) != AT91C_DATAFLASH_OK) + return -1; + + size -= SizeToRead; + addr += SizeToRead; + buffer += SizeToRead; + } + + return AT91C_DATAFLASH_OK; +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataflashProbe */ +/* Object : */ +/* Input Parameters : */ +/* Return value : Dataflash status register */ +/*------------------------------------------------------------------------------*/ +int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) +{ + AT91F_SpiEnable(cs); + AT91F_DataFlashGetStatus(pDesc); + return ((pDesc->command[1] == 0xFF)? 0: (pDesc->command[1] & 0x3C)); +} + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataFlashErase */ +/* Object : */ +/* Input Parameters : <*pDataFlash> = Device info */ +/*------------------------------------------------------------------------------*/ +AT91S_DataFlashStatus AT91F_DataFlashErase(AT91PS_DataFlash pDataFlash) +{ + unsigned int page; + unsigned int status; + + AT91F_SpiEnable(pDataFlash->pDevice->cs); + + for(page=0; page < pDataFlash->pDevice->pages_number; page++) + { + /* Erase dataflash page */ + if ((page & 0x00FF) == 0) + printf("\rERA %d/%d", page, pDataFlash->pDevice->pages_number); + status = AT91F_PageErase(pDataFlash, page); + AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); + if (!status) + return AT91C_DATAFLASH_ERROR; + } + + return AT91C_DATAFLASH_OK; +} + diff --git a/target/linux/at91/image/dfboot/src/com.c b/target/linux/at91/image/dfboot/src/com.c new file mode 100644 index 0000000..aacfb55 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/com.c @@ -0,0 +1,368 @@ +/*---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + *---------------------------------------------------------------------------- + * The software is delivered "AS IS" without warranty or condition of any + * kind, either express, implied or statutory. This includes without + * limitation any warranty or condition with respect to merchantability or + * fitness for any particular purpose, or against the infringements of + * intellectual property rights of others. + *---------------------------------------------------------------------------- + * File Name : com.c + * Object : + * Creation : HIi 03/27/2003 + * + *---------------------------------------------------------------------------- + */ +#include "AT91RM9200.h" +#include "lib_AT91RM9200.h" +#include "config.h" +#include "com.h" +#include "stdio.h" + +static char erase_seq[] = "\b \b"; /* erase sequence */ + +#define MAX_UARTS 1 + +//unsigned int usa[2] = {(unsigned int)AT91C_BASE_DBGU, (unsigned int)AT91C_ALTERNATE_USART}; +unsigned int usa[1] = {(unsigned int)AT91C_BASE_DBGU}; +unsigned int us; +int port_detected; + +void at91_init_uarts(void) +{ + int i; + + port_detected = 0; + AT91F_DBGU_CfgPIO(); + AT91F_US0_CfgPIO(); + AT91F_US0_CfgPMC(); + + for(i=0; i<MAX_UARTS; i++) { + us = usa[i]; + AT91F_US_ResetRx((AT91PS_USART)us); + AT91F_US_ResetTx((AT91PS_USART)us); + + // Configure DBGU + AT91F_US_Configure( + (AT91PS_USART)us, // DBGU base address + AT91C_MASTER_CLOCK, // 60 MHz + AT91C_US_ASYNC_MODE, // mode Register to be programmed + 115200, // baudrate to be programmed + 0 // timeguard to be programmed + ); + + // Enable Transmitter + AT91F_US_EnableTx((AT91PS_USART)us); + // Enable Receiver + AT91F_US_EnableRx((AT91PS_USART)us); + } + us = usa[0]; +} + +int at91_serial_putc(int ch) +{ + if (ch == '\n') + at91_serial_putc('\r'); + while (!AT91F_US_TxReady((AT91PS_USART)us)); + AT91F_US_PutChar((AT91PS_USART)us, (char)ch); + return ch; +} + +/* This getc is modified to be able work on more than one port. On certain + * boards (i.e. Figment Designs VersaLink), the debug port is not available + * once the unit is in it's enclosure, so, if one needs to get into dfboot + * for any reason it is impossible. With this getc, it scans between the debug + * port and another port and once it receives a character, it sets that port + * as the debug port. */ +int at91_serial_getc() +{ + while(1) { +#if 0 + if (!port_detected) { + if (us == usa[0]) { + us = usa[1]; + } + else { + us = usa[0]; + } + } +#endif + if(AT91F_US_RxReady((AT91PS_USART)us)) { +#if 0 + port_detected = 1; +#endif + return((int)AT91F_US_GetChar((AT91PS_USART)us)); + } + } +} + +/*----------------------------------------------------------------------------- + * Function Name : AT91F_ReadLine() + * Object : + * Input Parameters : + * Return value : + *----------------------------------------------------------------------------- + */ +int AT91F_ReadLine (const char *const prompt, char *console_buffer) +{ + char *p = console_buffer; + int n = 0; /* buffer index */ + int plen = strlen (prompt); /* prompt length */ + int col; /* output column cnt */ + char c; + + /* print prompt */ + if (prompt) + printf(prompt); + col = plen; + + for (;;) { + c = getc(); + + switch (c) { + case '\r': /* Enter */ + case '\n': + *p = '\0'; + puts ("\n"); + return (p - console_buffer); + + case 0x03: /* ^C - break */ + console_buffer[0] = '\0'; /* discard input */ + return (-1); + + case 0x08: /* ^H - backspace */ + case 0x7F: /* DEL - backspace */ + if (n) { + --p; + printf(erase_seq); + col--; + n--; + } + continue; + + default: + /* + * Must be a normal character then + */ + if (n < (AT91C_CB_SIZE -2)) + { + ++col; /* echo input */ + putc(c); + *p++ = c; + ++n; + } + else + { /* Buffer full */ + putc('\a'); + } + } + } +} + + +/*----------------------------------------------------------------------------- + * Function Name : AT91F_WaitKeyPressed() + * Object : + * Input Parameters : + * Return value : + *----------------------------------------------------------------------------- + */ +void AT91F_WaitKeyPressed(void) +{ + int c; + puts("KEY"); + c = getc(); + putc('\n'); +} + +int puts(const char *str) +{ + while(*str != 0) { + at91_serial_putc(*str); + str++; + } + return 1; +} + +int putc(int c) +{ + return at91_serial_putc(c); +} + +int putchar(c) +{ + return putc(c); +} + +int getc() +{ + return at91_serial_getc(); +} + +int strlen(const char *str) +{ + int len = 0; + + if(str == (char *)0) + return 0; + + while(*str++ != 0) + len++; + + return len; +} + +#define ZEROPAD 1 /* pad with zero */ +#define SIGN 2 /* unsigned/signed long */ +#define LEFT 4 /* left justified */ +#define LARGE 8 /* use 'ABCDEF' instead of 'abcdef' */ + +#define do_div(n,base) ({ \ + int __res; \ + __res = ((unsigned) n) % (unsigned) base; \ + n = ((unsigned) n) / (unsigned) base; \ + __res; \ +}) + +static int number(int num, int base, int size, + int precision, int type) +{ + char c, sign, tmp[66]; + const char *digits="0123456789ABCDEF"; + int i; + + if (type & LEFT) + type &= ~ZEROPAD; + if (base < 2 || base > 16) + return 0; + c = (type & ZEROPAD) ? '0' : ' '; + sign = 0; + + if(type & SIGN && num < 0) + { + sign = '-'; + num = -num; + size--; + } + + i = 0; + if(num == 0) + tmp[i++] = digits[0]; + else while(num != 0) + tmp[i++] = digits[do_div(num, base)]; + + if(i > precision) + precision = i; + size -= precision; + + if(!(type&(ZEROPAD+LEFT))) + while(size-->0) + putc(' '); + + if(sign) + putc(sign); + + if (!(type & LEFT)) + while (size-- > 0) + putc(c); + + while (i < precision--) + putc('0'); + + while (i-- > 0) + putc(tmp[i]); + + while (size-- > 0) + putc(' ');; + + return 1; +} + +int hvfprintf(const char *fmt, va_list va) +{ + char *s; + + do { + if(*fmt == '%') { + bool done = false; + + int type = 0; + int precision = 0; + + do { + fmt++; + switch(*fmt) { + case '0' : + if(!precision) + type |= ZEROPAD; + case '1' : + case '2' : + case '3' : + case '4' : + case '5' : + case '6' : + case '7' : + case '8' : + case '9' : + precision = precision * 10 + (*fmt - '0'); + break; + case '.' : + break; + case 's' : + s = va_arg(va, char *); + if(!s) + puts("<NULL>"); + else + puts(s); + done = true; + break; + case 'c' : + putc(va_arg(va, int)); + done = true; + break; + case 'd' : + number(va_arg(va, int), 10, 0, precision, type); + done = true; + break; + case 'x' : + case 'X' : + number(va_arg(va, int), 16, 0, precision, type); + done = true; + break; + case '%' : + putc(*fmt); + done = true; + default: + putc('%'); + putc(*fmt); + done = true; + break; + } + } while(!done); + } else if(*fmt == '\\') { + fmt++; + if(*fmt == 'r') { + putc('\r'); + } else if(*fmt == 'n') { + putc('\n'); + } + } else { + putc(*fmt); + } + fmt++; + } while(*fmt != 0); + + return 0; +} + +int printf(const char *fmt, ...) +{ + va_list ap; + int i; + + va_start(ap, fmt); + i = hvfprintf(fmt, ap); + va_end(ap); + + return i; +} diff --git a/target/linux/at91/image/dfboot/src/com.h b/target/linux/at91/image/dfboot/src/com.h new file mode 100644 index 0000000..7af09e4 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/com.h @@ -0,0 +1,28 @@ +/*---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + *---------------------------------------------------------------------------- + * The software is delivered "AS IS" without warranty or condition of any + * kind, either express, implied or statutory. This includes without + * limitation any warranty or condition with respect to merchantability or + * fitness for any particular purpose, or against the infringements of + * intellectual property rights of others. + *---------------------------------------------------------------------------- + * File Name : com.h + * Object : + * + * 1.0 27/03/03 HIi : Creation + *---------------------------------------------------------------------------- + */ +#ifndef com_h +#define com_h + +#define AT91C_CB_SIZE 20 /* size of the console buffer */ + +/* Escape sequences */ +#define ESC \033 + +extern int AT91F_ReadLine (const char *const prompt, char *console_buffer); +extern void AT91F_WaitKeyPressed(void); + +#endif + diff --git a/target/linux/at91/image/dfboot/src/config.h b/target/linux/at91/image/dfboot/src/config.h new file mode 100644 index 0000000..3be8d49 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/config.h @@ -0,0 +1,17 @@ + +#ifndef _CONFIG_H +#define _CONFIG_H + +//#define PAGESZ_1056 1 +#undef PAGESZ_1056 +#define SPI_LOW_SPEED 1 +#define AT91C_DELAY_TO_BOOT 1500 + +#define CRC_RETRIES 0x100 + +#define AT91C_MASTER_CLOCK 59904000 +#define AT91C_BAUD_RATE 115200 + +#define AT91C_ALTERNATE_USART AT91C_BASE_US0 + +#endif diff --git a/target/linux/at91/image/dfboot/src/cstartup_ram.S b/target/linux/at91/image/dfboot/src/cstartup_ram.S new file mode 100644 index 0000000..2239000 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/cstartup_ram.S @@ -0,0 +1,144 @@ +#include "AT91RM9200_inc.h" + +/*--------------------------- +ARM Core Mode and Status Bits +---------------------------*/ +.section start + .text + +#define ARM_MODE_USER 0x10 +#define ARM_MODE_FIQ 0x11 +#define ARM_MODE_IRQ 0x12 +#define ARM_MODE_SVC 0x13 +#define ARM_MODE_ABORT 0x17 +#define ARM_MODE_UNDEF 0x1B +#define ARM_MODE_SYS 0x1F + +#define I_BIT 0x80 +#define F_BIT 0x40 +#define T_BIT 0x20 + +/*---------------------------------------------------------------------------- + Area Definition +---------------- + Must be defined as function to put first in the code as it must be mapped + at offset 0 of the flash EBI_CSR0, ie. at address 0 before remap. +_---------------------------------------------------------------------------*/ + + .align 4 + .globl _start +_start: + +/*---------------------------------------------------------------------------- + Exception vectors ( before Remap ) +------------------------------------ + These vectors are read at address 0. + They absolutely requires to be in relative addresssing mode in order to + guarantee a valid jump. For the moment, all are just looping (what may be + dangerous in a final system). If an exception occurs before remap, this + would result in an infinite loop. +----------------------------------------------------------------------------*/ + b reset /* reset */ + b undefvec /* Undefined Instruction */ + b swivec /* Software Interrupt */ + b pabtvec /* Prefetch Abort */ + b dabtvec /* Data Abort */ + b rsvdvec /* reserved */ + b aicvec /* IRQ : read the AIC */ + b fiqvec /* FIQ */ + +undefvec: +swivec: +pabtvec: +dabtvec: +rsvdvec: +aicvec: +fiqvec: + b undefvec + +reset: + +#define MEMEND 0x00004000 + +/* ---------------------------- + Setup the stack for each mode +---------------------------- */ + +#define IRQ_STACK_SIZE 0x10 +#define FIQ_STACK_SIZE 0x04 +#define ABT_STACK_SIZE 0x04 +#define UND_STACK_SIZE 0x04 +#define SVC_STACK_SIZE 0x10 +#define USER_STACK_SIZE 0x400 + + ldr r0,= MEMEND + +/*- Set up Supervisor Mode and set Supervisor Mode Stack*/ + msr CPSR_c, #ARM_MODE_SVC | I_BIT | F_BIT + mov r13, r0 /* Init stack Undef*/ + sub r0, r0, #SVC_STACK_SIZE + +/*- Set up Interrupt Mode and set IRQ Mode Stack*/ + msr CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT + mov r13, r0 /* Init stack IRQ*/ + sub r0, r0, #IRQ_STACK_SIZE + +/*- Set up Fast Interrupt Mode and set FIQ Mode Stack*/ + msr CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT + mov r13, r0 /* Init stack FIQ*/ + sub r0, r0, #FIQ_STACK_SIZE + +/*- Set up Abort Mode and set Abort Mode Stack*/ + msr CPSR_c, #ARM_MODE_ABORT | I_BIT | F_BIT + mov r13, r0 /* Init stack Abort*/ + sub r0, r0, #ABT_STACK_SIZE + +/*- Set up Undefined Instruction Mode and set Undef Mode Stack*/ + msr CPSR_c, #ARM_MODE_UNDEF | I_BIT | F_BIT + mov r13, r0 /* Init stack Undef*/ + sub r0, r0, #UND_STACK_SIZE + +/*- Set up user Mode and set System Mode Stack*/ + msr CPSR_c, #ARM_MODE_SYS | I_BIT | F_BIT + bic r0, r0, #3 /* Insure word alignement */ + mov sp, r0 /* Init stack System */ + + + ldr r0, = AT91F_LowLevelInit + mov lr, pc + bx r0 + +/*---------------------------------------- + Read/modify/write CP15 control register +----------------------------------------*/ + mrc p15, 0, r0, c1, c0,0 /* read cp15 control registre (cp15 r1) in r0 */ + ldr r3,= 0xC0000080 /* Reset bit :Little Endian end fast bus mode */ + ldr r4,= 0xC0001000 /* Set bit :Asynchronous clock mode, Not Fast Bus, I-Cache enable */ + bic r0, r0, r3 + orr r0, r0, r4 + mcr p15, 0, r0, c1, c0,0 /* write r0 in cp15 control registre (cp15 r1) */ + +/* Enable interrupts */ + msr CPSR_c, #ARM_MODE_SYS | F_BIT + +/*------------------------------------------------------------------------------ +- Branch on C code Main function (with interworking) +---------------------------------------------------- +- Branch must be performed by an interworking call as either an ARM or Thumb +- _start function must be supported. This makes the code not position- +- independent. A Branch with link would generate errors +----------------------------------------------------------------------------*/ + +/*- Branch to _start by interworking*/ + ldr r4, = main + mov lr, pc + bx r4 + +/*----------------------------------------------------------------------------- +- Loop for ever +--------------- +- End of application. Normally, never occur. +- Could jump on Software Reset ( B 0x0 ). +------------------------------------------------------------------------------*/ +End: + b End diff --git a/target/linux/at91/image/dfboot/src/dataflash.c b/target/linux/at91/image/dfboot/src/dataflash.c new file mode 100644 index 0000000..5e54460 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/dataflash.c @@ -0,0 +1,208 @@ +/*---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + *---------------------------------------------------------------------------- + * The software is delivered "AS IS" without warranty or condition of any + * kind, either express, implied or statutory. This includes without + * limitation any warranty or condition with respect to merchantability or + * fitness for any particular purpose, or against the infringements of + * intellectual property rights of others. + *---------------------------------------------------------------------------- + * File Name : dataflash.c + * Object : High level functions for the dataflash + * Creation : HIi 10/10/2003 + *---------------------------------------------------------------------------- + */ +#include "config.h" +#include "stdio.h" +#include "dataflash.h" + + +AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; +static AT91S_DataFlash DataFlashInst; + +int cs[][CFG_MAX_DATAFLASH_BANKS] = { + {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ + {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3} +}; + +int AT91F_DataflashInit(void) +{ + int i; + int dfcode; + int Nb_device = 0; + + AT91F_SpiInit(); + + for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { + dataflash_info[i].id = 0; + dataflash_info[i].Device.pages_number = 0; + dfcode = AT91F_DataflashProbe (cs[i][1], &dataflash_info[i].Desc); + + switch (dfcode) { + case AT45DB161: + dataflash_info[i].Device.pages_number = 4096; + dataflash_info[i].Device.pages_size = 528; + dataflash_info[i].Device.page_offset = 10; + dataflash_info[i].Device.byte_mask = 0x300; + dataflash_info[i].Device.cs = cs[i][1]; + dataflash_info[i].Desc.DataFlash_state = IDLE; + dataflash_info[i].logical_address = cs[i][0]; + dataflash_info[i].id = dfcode; + Nb_device++; + break; + + case AT45DB321: + dataflash_info[i].Device.pages_number = 8192; + dataflash_info[i].Device.pages_size = 528; + dataflash_info[i].Device.page_offset = 10; + dataflash_info[i].Device.byte_mask = 0x300; + dataflash_info[i].Device.cs = cs[i][1]; + dataflash_info[i].Desc.DataFlash_state = IDLE; + dataflash_info[i].logical_address = cs[i][0]; + dataflash_info[i].id = dfcode; + Nb_device++; + break; + + case AT45DB642: + dataflash_info[i].Device.pages_number = 8192; + dataflash_info[i].Device.pages_size = 1056; + dataflash_info[i].Device.page_offset = 11; + dataflash_info[i].Device.byte_mask = 0x700; + dataflash_info[i].Device.cs = cs[i][1]; + dataflash_info[i].Desc.DataFlash_state = IDLE; + dataflash_info[i].logical_address = cs[i][0]; + dataflash_info[i].id = dfcode; + Nb_device++; + break; + case AT45DB128: + dataflash_info[i].Device.pages_number = 16384; + dataflash_info[i].Device.pages_size = 1056; + dataflash_info[i].Device.page_offset = 11; + dataflash_info[i].Device.byte_mask = 0x700; + dataflash_info[i].Device.cs = cs[i][1]; + dataflash_info[i].Desc.DataFlash_state = IDLE; + dataflash_info[i].logical_address = cs[i][0]; + dataflash_info[i].id = dfcode; + Nb_device++; + break; + default: + break; + } + } + return (Nb_device); +} + + +void AT91F_DataflashPrintInfo(void) +{ + int i; + for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { + if (dataflash_info[i].id != 0) { + printf ("DF:AT45DB"); + switch (dataflash_info[i].id) { + case AT45DB161: + printf ("161"); + break; + + case AT45DB321: + printf ("321"); + break; + + case AT45DB642: + printf ("642"); + break; + case AT45DB128: + printf ("128"); + break; + } + + printf ("\n# PG: %6d\n" + "PG SZ: %6d\n" + "SZ=%8d bytes\n" + "ADDR: %08X\n", + (unsigned int) dataflash_info[i].Device.pages_number, + (unsigned int) dataflash_info[i].Device.pages_size, + (unsigned int) dataflash_info[i].Device.pages_number * + dataflash_info[i].Device.pages_size, + (unsigned int) dataflash_info[i].logical_address); + } + } +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : AT91F_DataflashSelect */ +/* Object : Select the correct device */ +/*------------------------------------------------------------------------------*/ +static AT91PS_DataFlash AT91F_DataflashSelect(AT91PS_DataFlash pFlash, + unsigned int *addr) +{ + char addr_valid = 0; + int i; + + for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) + if ((*addr & 0xFF000000) == dataflash_info[i].logical_address) { + addr_valid = 1; + break; + } + if (!addr_valid) { + pFlash = (AT91PS_DataFlash) 0; + return pFlash; + } + pFlash->pDataFlashDesc = &(dataflash_info[i].Desc); + pFlash->pDevice = &(dataflash_info[i].Device); + *addr -= dataflash_info[i].logical_address; + return (pFlash); +} + + +/*------------------------------------------------------------------------------*/ +/* Function Name : read_dataflash */ +/* Object : dataflash memory read */ +/*------------------------------------------------------------------------------*/ +int read_dataflash(unsigned long addr, unsigned long size, char *result) +{ + unsigned int AddrToRead = addr; + AT91PS_DataFlash pFlash = &DataFlashInst; + + pFlash = AT91F_DataflashSelect (pFlash, &AddrToRead); + if (pFlash == 0) + return -1; + + return (AT91F_DataFlashRead(pFlash, AddrToRead, size, result)); +} + + +/*-----------------------------------------------------------------------------*/ +/* Function Name : write_dataflash */ +/* Object : write a block in dataflash */ +/*-----------------------------------------------------------------------------*/ +int write_dataflash(unsigned long addr_dest, unsigned int addr_src, + unsigned int size) +{ + unsigned int AddrToWrite = addr_dest; + AT91PS_DataFlash pFlash = &DataFlashInst; + + pFlash = AT91F_DataflashSelect(pFlash, &AddrToWrite); + if (AddrToWrite == -1) + return -1; + + return AT91F_DataFlashWrite(pFlash, (unsigned char *) addr_src, AddrToWrite, size); +} + +/*-----------------------------------------------------------------------------*/ +/* Function Name : erase_dataflash */ +/* Object : Erase entire dataflash */ +/*-----------------------------------------------------------------------------*/ +int erase_dataflash(unsigned long addr_dest) +{ + unsigned int AddrToWrite = addr_dest; + AT91PS_DataFlash pFlash = &DataFlashInst; + + pFlash = AT91F_DataflashSelect (pFlash, &AddrToWrite); + if (AddrToWrite == -1) + return -1; + + return AT91F_DataFlashErase(pFlash); +} + diff --git a/target/linux/at91/image/dfboot/src/dataflash.h b/target/linux/at91/image/dfboot/src/dataflash.h new file mode 100644 index 0000000..8fab63f --- /dev/null +++ b/target/linux/at91/image/dfboot/src/dataflash.h @@ -0,0 +1,181 @@ +//*--------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - +//*--------------------------------------------------------------------------- +//* The software is delivered "AS IS" without warranty or condition of any +//* kind, either express, implied or statutory. This includes without +//* limitation any warranty or condition with respect to merchantability or +//* fitness for any particular purpose, or against the infringements of +//* intellectual property rights of others. +//*--------------------------------------------------------------------------- +//* File Name : AT91_SpiDataFlash.h +//* Object : Data Flash Atmel Description File +//* Translator : +//* +//* 1.0 03/04/01 HI : Creation +//* +//*--------------------------------------------------------------------------- + +#ifndef _DataFlash_h +#define _DataFlash_h + +/* Max value = 15Mhz to be compliant with the Continuous array read function */ +#ifdef SPI_LOW_SPEED +#define AT91C_SPI_CLK 14976000/4 +#else +#define AT91C_SPI_CLK 14976000 +#endif + +/* AC characteristics */ +/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */ + +#define DATAFLASH_TCSS (0xf << 16) /* 250ns 15/60000000 */ +#define DATAFLASH_TCHS (0x1 << 24) /* 250ns 32*1/60000000 */ + + +#define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0 : NPCS0 %1110 */ +#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3 : NPCS3 %0111 */ + +#define CFG_MAX_DATAFLASH_BANKS 2 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 +#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 + +typedef struct { + unsigned long base; /* logical base address for a bank */ + unsigned long size; /* total bank size */ + unsigned long page_count; + unsigned long page_size; + unsigned long id; /* device id */ +} dataflash_info_t; + +typedef unsigned int AT91S_DataFlashStatus; + +/*----------------------------------------------------------------------*/ +/* DataFlash Structures */ +/*----------------------------------------------------------------------*/ + +/*---------------------------------------------*/ +/* DataFlash Descriptor Structure Definition */ +/*---------------------------------------------*/ +typedef struct _AT91S_DataflashDesc { + unsigned char *tx_cmd_pt; + unsigned int tx_cmd_size; + unsigned char *rx_cmd_pt; + unsigned int rx_cmd_size; + unsigned char *tx_data_pt; + unsigned int tx_data_size; + unsigned char *rx_data_pt; + unsigned int rx_data_size; + volatile unsigned char DataFlash_state; + unsigned char command[8]; +} AT91S_DataflashDesc, *AT91PS_DataflashDesc; + +/*---------------------------------------------*/ +/* DataFlash device definition structure */ +/*---------------------------------------------*/ +typedef struct _AT91S_Dataflash { + int pages_number; /* dataflash page number */ + int pages_size; /* dataflash page size */ + int page_offset; /* page offset in command */ + int byte_mask; /* byte mask in command */ + int cs; +} AT91S_DataflashFeatures, *AT91PS_DataflashFeatures; + + +/*---------------------------------------------*/ +/* DataFlash Structure Definition */ +/*---------------------------------------------*/ +typedef struct _AT91S_DataFlash { + AT91PS_DataflashDesc pDataFlashDesc; /* dataflash descriptor */ + AT91PS_DataflashFeatures pDevice; /* Pointer on a dataflash features array */ +} AT91S_DataFlash, *AT91PS_DataFlash; + + +typedef struct _AT91S_DATAFLASH_INFO { + + AT91S_DataflashDesc Desc; + AT91S_DataflashFeatures Device; /* Pointer on a dataflash features array */ + unsigned long logical_address; + unsigned int id; /* device id */ +} AT91S_DATAFLASH_INFO, *AT91PS_DATAFLASH_INFO; + + +/*-------------------------------------------------------------------------------------------------*/ + +#define AT45DB161 0x2c +#define AT45DB321 0x34 +#define AT45DB642 0x3c +#define AT45DB128 0x10 + +#define AT91C_DATAFLASH_TIMEOUT 20000 /* For AT91F_DataFlashWaitReady */ + +/* DataFlash return value */ +#define AT91C_DATAFLASH_BUSY 0x00 +#define AT91C_DATAFLASH_OK 0x01 +#define AT91C_DATAFLASH_ERROR 0x02 +#define AT91C_DATAFLASH_MEMORY_OVERFLOW 0x03 +#define AT91C_DATAFLASH_BAD_COMMAND 0x04 +#define AT91C_DATAFLASH_BAD_ADDRESS 0x05 + + +/* Driver State */ +#define IDLE 0x0 +#define BUSY 0x1 +#define ERROR 0x2 + +/* DataFlash Driver State */ +#define GET_STATUS 0x0F + +/*-------------------------------------------------------------------------------------------------*/ +/* Command Definition */ +/*-------------------------------------------------------------------------------------------------*/ + +/* READ COMMANDS */ +#define DB_CONTINUOUS_ARRAY_READ 0xE8 /* Continuous array read */ +#define DB_BURST_ARRAY_READ 0xE8 /* Burst array read */ +#define DB_PAGE_READ 0xD2 /* Main memory page read */ +#define DB_BUF1_READ 0xD4 /* Buffer 1 read */ +#define DB_BUF2_READ 0xD6 /* Buffer 2 read */ +#define DB_STATUS 0xD7 /* Status Register */ + +/* PROGRAM and ERASE COMMANDS */ +#define DB_BUF1_WRITE 0x84 /* Buffer 1 write */ +#define DB_BUF2_WRITE 0x87 /* Buffer 2 write */ +#define DB_BUF1_PAGE_ERASE_PGM 0x83 /* Buffer 1 to main memory page program with built-In erase */ +#define DB_BUF1_PAGE_ERASE_FASTPGM 0x93 /* Buffer 1 to main memory page program with built-In erase, Fast program */ +#define DB_BUF2_PAGE_ERASE_PGM 0x86 /* Buffer 2 to main memory page program with built-In erase */ +#define DB_BUF2_PAGE_ERASE_FASTPGM 0x96 /* Buffer 1 to main memory page program with built-In erase, Fast program */ +#define DB_BUF1_PAGE_PGM 0x88 /* Buffer 1 to main memory page program without built-In erase */ +#define DB_BUF1_PAGE_FASTPGM 0x98 /* Buffer 1 to main memory page program without built-In erase, Fast program */ +#define DB_BUF2_PAGE_PGM 0x89 /* Buffer 2 to main memory page program without built-In erase */ +#define DB_BUF2_PAGE_FASTPGM 0x99 /* Buffer 1 to main memory page program without built-In erase, Fast program */ +#define DB_PAGE_ERASE 0x81 /* Page Erase */ +#define DB_BLOCK_ERASE 0x50 /* Block Erase */ +#define DB_PAGE_PGM_BUF1 0x82 /* Main memory page through buffer 1 */ +#define DB_PAGE_FASTPGM_BUF1 0x92 /* Main memory page through buffer 1, Fast program */ +#define DB_PAGE_PGM_BUF2 0x85 /* Main memory page through buffer 2 */ +#define DB_PAGE_FastPGM_BUF2 0x95 /* Main memory page through buffer 2, Fast program */ + +/* ADDITIONAL COMMANDS */ +#define DB_PAGE_2_BUF1_TRF 0x53 /* Main memory page to buffer 1 transfert */ +#define DB_PAGE_2_BUF2_TRF 0x55 /* Main memory page to buffer 2 transfert */ +#define DB_PAGE_2_BUF1_CMP 0x60 /* Main memory page to buffer 1 compare */ +#define DB_PAGE_2_BUF2_CMP 0x61 /* Main memory page to buffer 2 compare */ +#define DB_AUTO_PAGE_PGM_BUF1 0x58 /* Auto page rewrite throught buffer 1 */ +#define DB_AUTO_PAGE_PGM_BUF2 0x59 /* Auto page rewrite throught buffer 2 */ + +/*-------------------------------------------------------------------------------------------------*/ + +extern AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; + +extern void AT91F_SpiInit(void); +extern int AT91F_DataflashProbe(int i, AT91PS_DataflashDesc pDesc); +extern int AT91F_DataFlashRead(AT91PS_DataFlash, unsigned long , unsigned long, char *); +extern AT91S_DataFlashStatus AT91F_DataFlashWrite(AT91PS_DataFlash ,unsigned char *, int, int); +extern AT91S_DataFlashStatus AT91F_DataFlashErase(AT91PS_DataFlash pDataFlash); +extern int AT91F_DataflashInit(void); +extern void AT91F_DataflashPrintInfo(void); +extern int read_dataflash(unsigned long addr, unsigned long size, char *result); +extern int write_dataflash(unsigned long addr_dest, unsigned int addr_src, unsigned int size); +extern int erase_dataflash(unsigned long addr_dest); + +#endif diff --git a/target/linux/at91/image/dfboot/src/div0.c b/target/linux/at91/image/dfboot/src/div0.c new file mode 100644 index 0000000..d6fd90e --- /dev/null +++ b/target/linux/at91/image/dfboot/src/div0.c @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Replacement (=dummy) for GNU/Linux division-by zero handler */ +void __div0 (void) +{ + while(-1); +} diff --git a/target/linux/at91/image/dfboot/src/elf32-littlearm.lds b/target/linux/at91/image/dfboot/src/elf32-littlearm.lds new file mode 100644 index 0000000..4d4efb6 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/elf32-littlearm.lds @@ -0,0 +1,19 @@ +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : { *(.text) } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .bss : { *(.bss) } +}
\ No newline at end of file diff --git a/target/linux/at91/image/dfboot/src/embedded_services.h b/target/linux/at91/image/dfboot/src/embedded_services.h new file mode 100644 index 0000000..956b9ed --- /dev/null +++ b/target/linux/at91/image/dfboot/src/embedded_services.h @@ -0,0 +1,500 @@ +//*---------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - +//*---------------------------------------------------------------------------- +//* The software is delivered "AS IS" without warranty or condition of any +//* kind, either express, implied or statutory. This includes without +//* limitation any warranty or condition with respect to merchantability or +//* fitness for any particular purpose, or against the infringements of +//* intellectual property rights of others. +//*---------------------------------------------------------------------------- +//* File Name : embedded_sevices.h +//* Object : Header File with all the embedded software services definitions +//* +//* 1.0 24 Jan 2003 FB : Creation +//*---------------------------------------------------------------------------- +#ifndef embedded_sevices_h +#define embedded_sevices_h + +#include "AT91RM9200.h" + +#define AT91C_BASE_ROM (char *)0x00100000 + +/* Return values */ +#define AT91C_BUFFER_SUCCESS 0 +#define AT91C_BUFFER_ERROR_SHIFT 16 +#define AT91C_BUFFER_ERROR (0x0F << AT91C_BUFFER_ERROR_SHIFT) + +#define AT91C_BUFFER_OVERFLOW (0x01 << AT91C_BUFFER_ERROR_SHIFT) +#define AT91C_BUFFER_UNDERRUN (0x02 << AT91C_BUFFER_ERROR_SHIFT) + +typedef unsigned int AT91S_BufferStatus; + +struct _AT91S_Pipe; + +// This structure is a virtual object of a buffer +typedef struct _AT91S_Buffer +{ + struct _AT91S_Pipe *pPipe; + void *pChild; + + // Functions invoked by the pipe + AT91S_BufferStatus (*SetRdBuffer) (struct _AT91S_Buffer *pSBuffer, char *pBuffer, unsigned int Size); + AT91S_BufferStatus (*SetWrBuffer) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer, unsigned int Size); + AT91S_BufferStatus (*RstRdBuffer) (struct _AT91S_Buffer *pSBuffer); + AT91S_BufferStatus (*RstWrBuffer) (struct _AT91S_Buffer *pSBuffer); + char (*MsgWritten) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer); + char (*MsgRead) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer); + // Functions invoked by the peripheral + AT91S_BufferStatus (*GetWrBuffer) (struct _AT91S_Buffer *pSBuffer, char const **pData, unsigned int *pSize); + AT91S_BufferStatus (*GetRdBuffer) (struct _AT91S_Buffer *pSBuffer, char **pData, unsigned int *pSize); + AT91S_BufferStatus (*EmptyWrBuffer) (struct _AT91S_Buffer *pSBuffer, unsigned int size); + AT91S_BufferStatus (*FillRdBuffer) (struct _AT91S_Buffer *pSBuffer, unsigned int size); + char (*IsWrEmpty) (struct _AT91S_Buffer *pSBuffer); + char (*IsRdFull) (struct _AT91S_Buffer *pSBuffer); +} AT91S_Buffer, *AT91PS_Buffer; + +// =========================================================================================== +// SimpleBuffer definition +// +// This structure is pointed by pRealBuffer field in the SBuffer +// It contains usefull information for a real implementation of +// a SBuffer object. +// The application just create an instance of SSBUffer and SBuffer, +// call OpenSimpleBuffer, and continue using SBuffer instance + +typedef struct _AT91S_SBuffer +{ + AT91S_Buffer parent; + char *pRdBuffer; + char const *pWrBuffer; + unsigned int szRdBuffer; + unsigned int szWrBuffer; + unsigned int stRdBuffer; + unsigned int stWrBuffer; +} AT91S_SBuffer, *AT91PS_SBuffer; + +typedef AT91PS_Buffer (*AT91PF_OpenSBuffer) (AT91PS_SBuffer); + +// This function is called by the application +extern AT91PS_Buffer AT91F_OpenSBuffer(AT91PS_SBuffer pBuffer); + +// Functions invoked by the pipe +extern AT91S_BufferStatus AT91F_SbSetRdBuffer (AT91PS_Buffer pBuffer, char *pData, unsigned int Size); +extern AT91S_BufferStatus AT91F_SbSetWrBuffer (AT91PS_Buffer pBuffer, char const *pData, unsigned int Size); +extern AT91S_BufferStatus AT91F_SbRstRdBuffer (AT91PS_Buffer pBuffer); +extern AT91S_BufferStatus AT91F_SbRstWrBuffer (AT91PS_Buffer pBuffer); +extern char AT91F_SbMsgWritten (AT91PS_Buffer pBuffer, char const *pMsg); +extern char AT91F_SbMsgRead (AT91PS_Buffer pBuffer, char const *pMsg); +// Functions invoked by the peripheral +extern AT91S_BufferStatus AT91F_SbGetWrBuffer (AT91PS_Buffer pBuffer, char const **pData, unsigned int *pSize); +extern AT91S_BufferStatus AT91F_SbGetRdBuffer (AT91PS_Buffer pBuffer, char **pData, unsigned int *pSize); +extern AT91S_BufferStatus AT91F_SbEmptyWrBuffer(AT91PS_Buffer pBuffer, unsigned int size); +extern AT91S_BufferStatus AT91F_SbFillRdBuffer (AT91PS_Buffer pBuffer, unsigned int size); +extern char AT91F_SbIsWrEmpty (AT91PS_Buffer pBuffer); +extern char AT91F_SbIsRdFull (AT91PS_Buffer pBuffer); + +#ifdef DBG_DRV_BUFFER +extern char const *AT91F_SbGetError(AT91S_BufferStatus errorNumber); +#endif + + +#define AT91C_OPEN_CTRLTEMPO_SUCCESS 0 +#define AT91C_ERROR_OPEN_CTRLTEMPO 1 +#define AT91C_START_OK 2 +#define AT91C_STOP_OK 3 +#define AT91C_TIMEOUT_REACHED 4 + +typedef enum _AT91E_SvcTempo { + AT91E_SVCTEMPO_DIS, + AT91E_SVCTEMPO_EN +} AT91E_SvcTempo; + +typedef unsigned int AT91S_TempoStatus; + +// AT91S_SvcTempo +typedef struct _AT91S_SvcTempo +{ + + // Methods: + AT91S_TempoStatus (*Start) ( + struct _AT91S_SvcTempo *pSvc, + unsigned int timeout, + unsigned int reload, + void (*callback) (AT91S_TempoStatus, void *), + void *pData); + AT91S_TempoStatus (*Stop) (struct _AT91S_SvcTempo *pSvc); + + struct _AT91S_SvcTempo *pPreviousTempo; + struct _AT91S_SvcTempo *pNextTempo; + + // Data + unsigned int TickTempo; //* timeout value + unsigned int ReloadTempo;//* Reload value for periodic execution + void (*TempoCallback)(AT91S_TempoStatus, void *); + void *pPrivateData; + AT91E_SvcTempo flag; +} AT91S_SvcTempo, *AT91PS_SvcTempo; + + +// AT91S_CtrlTempo +typedef struct _AT91S_CtlTempo +{ + // Members: + + // Start and stop for Timer hardware + AT91S_TempoStatus (*CtlTempoStart) (void *pTimer); + AT91S_TempoStatus (*CtlTempoStop) (void *pTimer); + + // Start and stop for Tempo service + AT91S_TempoStatus (*SvcTempoStart) ( + struct _AT91S_SvcTempo *pSvc, + unsigned int timeout, + unsigned int reload, + void (*callback) (AT91S_TempoStatus, void *), + void *pData); + AT91S_TempoStatus (*SvcTempoStop) (struct _AT91S_SvcTempo *pSvc); + AT91S_TempoStatus (*CtlTempoSetTime)(struct _AT91S_CtlTempo *pCtrl, unsigned int NewTime); + AT91S_TempoStatus (*CtlTempoGetTime)(struct _AT91S_CtlTempo *pCtrl); + AT91S_TempoStatus (*CtlTempoIsStart)(struct _AT91S_CtlTempo *pCtrl); + AT91S_TempoStatus (*CtlTempoCreate) ( + struct _AT91S_CtlTempo *pCtrl, + struct _AT91S_SvcTempo *pTempo); + AT91S_TempoStatus (*CtlTempoRemove) ( + struct _AT91S_CtlTempo *pCtrl, + struct _AT91S_SvcTempo *pTempo); + AT91S_TempoStatus (*CtlTempoTick) (struct _AT91S_CtlTempo *pCtrl); + + // Data: + + void *pPrivateData; // Pointer to devived class + void const *pTimer; // hardware + AT91PS_SvcTempo pFirstTempo; + AT91PS_SvcTempo pNewTempo; +} AT91S_CtlTempo, *AT91PS_CtlTempo; +typedef AT91S_TempoStatus (*AT91PF_OpenCtlTempo) ( AT91PS_CtlTempo, void const *); + +// This function is called by the application. +extern AT91S_TempoStatus AT91F_OpenCtlTempo( AT91PS_CtlTempo pCtrlTempo, void const *pTempoTimer ); + +extern AT91S_TempoStatus AT91F_STStart (void *); +extern AT91S_TempoStatus AT91F_STStop (void *); +extern AT91S_TempoStatus AT91F_STSetTime (AT91PS_CtlTempo, unsigned int); +extern AT91S_TempoStatus AT91F_STGetTime (AT91PS_CtlTempo); +extern AT91S_TempoStatus AT91F_STIsStart (AT91PS_CtlTempo); +extern AT91S_TempoStatus AT91F_CtlTempoCreate (AT91PS_CtlTempo, AT91PS_SvcTempo); +extern AT91S_TempoStatus AT91F_CtlTempoRemove (AT91PS_CtlTempo, AT91PS_SvcTempo); +extern AT91S_TempoStatus AT91F_CtlTempoTick (AT91PS_CtlTempo); +extern AT91S_TempoStatus AT91F_SvcTempoStart ( + AT91PS_SvcTempo pSvc, + unsigned int timeout, + unsigned int reload, + void (*callback) (AT91S_TempoStatus, void *), + void *pData); +extern AT91S_TempoStatus AT91F_SvcTempoStop (AT91PS_SvcTempo); + + +// Following types are defined in another header files +struct _AT91S_Buffer; + +// Constants: +#define AT91C_COMMSVC_SUCCESS 0 +#define AT91C_COMMSVC_ERROR_SHIFT 8 +#define AT91C_COMMSVC_ERROR (0x0f << AT91C_COMMSVC_ERROR_SHIFT) + +typedef unsigned int AT91S_SvcCommStatus; + +// AT91S_Service definition +// This structure is an abstraction of a communication peripheral +typedef struct _AT91S_Service +{ + // Methods: + AT91S_SvcCommStatus (*Reset) (struct _AT91S_Service *pService); + AT91S_SvcCommStatus (*StartTx)(struct _AT91S_Service *pService); + AT91S_SvcCommStatus (*StartRx)(struct _AT91S_Service *pService); + AT91S_SvcCommStatus (*StopTx) (struct _AT91S_Service *pService); + AT91S_SvcCommStatus (*StopRx) (struct _AT91S_Service *pService); + char (*TxReady)(struct _AT91S_Service *pService); + char (*RxReady)(struct _AT91S_Service *pService); + // Data: + struct _AT91S_Buffer *pBuffer; // Link to a buffer object + void *pChild; +} AT91S_SvcComm, *AT91PS_SvcComm; + +// Constants: +#define AT91C_XMODEM_SOH 0x01 /* Start of Heading for 128 bytes */ +#define AT91C_XMODEM_STX 0x02 /* Start of heading for 1024 bytes */ +#define AT91C_XMODEM_EOT 0x04 /* End of transmission */ +#define AT91C_XMODEM_ACK 0x06 /* Acknowledge */ +#define AT91C_XMODEM_NAK 0x15 /* Negative Acknowledge */ +#define AT91C_XMODEM_CRCCHR 'C' + +#define AT91C_XMODEM_PACKET_SIZE 2 // packet + packetCRC +#define AT91C_XMODEM_CRC_SIZE 2 // crcLSB + crcMSB +#define AT91C_XMODEM_DATA_SIZE_SOH 128 // data 128 corresponding to SOH header +#define AT91C_XMODEM_DATA_SIZE_STX 1024 // data 1024 corresponding to STX header + +//* Following structure is used by SPipe to refer to the USB device peripheral endpoint +typedef struct _AT91PS_SvcXmodem { + + // Public Methods: + AT91S_SvcCommStatus (*Handler) (struct _AT91PS_SvcXmodem *, unsigned int); + AT91S_SvcCommStatus (*StartTx) (struct _AT91PS_SvcXmodem *, unsigned int); + AT91S_SvcCommStatus (*StopTx) (struct _AT91PS_SvcXmodem *, unsigned int); + + // Private Methods: + AT91S_SvcCommStatus (*ReadHandler) (struct _AT91PS_SvcXmodem *, unsigned int csr); + AT91S_SvcCommStatus (*WriteHandler) (struct _AT91PS_SvcXmodem *, unsigned int csr); + unsigned short (*GetCrc) (char *ptr, unsigned int count); + char (*CheckHeader) (unsigned char currentPacket, char *packet); + char (*CheckData) (struct _AT91PS_SvcXmodem *); + + AT91S_SvcComm parent; // Base class + AT91PS_USART pUsart; + + AT91S_SvcTempo tempo; // Link to a AT91S_Tempo object + + char *pData; + unsigned int dataSize; // = XMODEM_DATA_STX or XMODEM_DATA_SOH + char packetDesc[AT91C_XMODEM_PACKET_SIZE]; + unsigned char packetId; // Current packet + char packetStatus; + char isPacketDesc; + char eot; // end of transmition +} AT91S_SvcXmodem, *AT91PS_SvcXmodem; + +typedef AT91PS_SvcComm (*AT91PF_OpenSvcXmodem) ( AT91PS_SvcXmodem, AT91PS_USART, AT91PS_CtlTempo); + +// This function is called by the application. +extern AT91PS_SvcComm AT91F_OpenSvcXmodem( AT91PS_SvcXmodem, AT91PS_USART, AT91PS_CtlTempo); + +extern unsigned short AT91F_SvcXmodemGetCrc (char *ptr, unsigned int count); +extern char AT91F_SvcXmodemCheckHeader(unsigned char currentPacket, char *packet); +extern char AT91F_SvcXmodemCheckData (AT91PS_SvcXmodem pSvcXmodem); +extern AT91S_SvcCommStatus AT91F_SvcXmodemReadHandler(AT91PS_SvcXmodem pSvcXmodem, unsigned int csr); +extern AT91S_SvcCommStatus AT91F_SvcXmodemWriteHandler(AT91PS_SvcXmodem pSvcXmodem, unsigned int csr); +extern AT91S_SvcCommStatus AT91F_SvcXmodemStartTx(AT91PS_SvcComm pSvcComm); +extern AT91S_SvcCommStatus AT91F_SvcXmodemStopTx(AT91PS_SvcComm pSvcComm); +extern AT91S_SvcCommStatus AT91F_SvcXmodemStartRx(AT91PS_SvcComm pSvcComm); +extern AT91S_SvcCommStatus AT91F_SvcXmodemStopRx(AT91PS_SvcComm pSvcComm); +extern char AT91F_SvcXmodemTxReady(AT91PS_SvcComm pService); +extern char AT91F_SvcXmodemRxReady(AT91PS_SvcComm pSvcComm); + + +// Constants: +#define AT91C_PIPE_SUCCESS 0 +#define AT91C_PIPE_ERROR_SHIFT 8 +#define AT91C_PIPE_ERROR (0x0F << AT91C_PIPE_ERROR_SHIFT) + +#define AT91C_PIPE_OPEN_FAILED (1 << AT91C_PIPE_ERROR_SHIFT) +#define AT91C_PIPE_WRITE_FAILED (2 << AT91C_PIPE_ERROR_SHIFT) +#define AT91C_PIPE_WRITE_ABORTED (3 << AT91C_PIPE_ERROR_SHIFT) +#define AT91C_PIPE_READ_FAILED (4 << AT91C_PIPE_ERROR_SHIFT) +#define AT91C_PIPE_READ_ABORTED (5 << AT91C_PIPE_ERROR_SHIFT) +#define AT91C_PIPE_ABORT_FAILED (6 << AT91C_PIPE_ERROR_SHIFT) +#define AT91C_PIPE_RESET_FAILED (7 << AT91C_PIPE_ERROR_SHIFT) + +/* _AT91S_Pipe stucture */ +typedef unsigned int AT91S_PipeStatus; + +typedef struct _AT91S_Pipe +{ + // A pipe is linked with a peripheral and a buffer + AT91PS_SvcComm pSvcComm; + AT91PS_Buffer pBuffer; + + // Callback functions with their arguments + void (*WriteCallback) (AT91S_PipeStatus, void *); + void (*ReadCallback) (AT91S_PipeStatus, void *); + void *pPrivateReadData; + void *pPrivateWriteData; + + // Pipe methods + AT91S_PipeStatus (*Write) ( + struct _AT91S_Pipe *pPipe, + char const * pData, + unsigned int size, + void (*callback) (AT91S_PipeStatus, void *), + void *privateData); + AT91S_PipeStatus (*Read) ( + struct _AT91S_Pipe *pPipe, + char *pData, + unsigned int size, + void (*callback) (AT91S_PipeStatus, void *), + void *privateData); + AT91S_PipeStatus (*AbortWrite) ( + struct _AT91S_Pipe *pPipe); + AT91S_PipeStatus (*AbortRead) ( + struct _AT91S_Pipe *pPipe); + AT91S_PipeStatus (*Reset) ( + struct _AT91S_Pipe *pPipe); + char (*IsWritten) ( + struct _AT91S_Pipe *pPipe, + char const *pVoid); + char (*IsReceived) ( + struct _AT91S_Pipe *pPipe, + char const *pVoid); +} AT91S_Pipe, *AT91PS_Pipe; + +// types used in AT91S_Pipe +typedef AT91PS_Pipe (*AT91PF_OpenPipe) (AT91PS_Pipe, AT91PS_SvcComm, AT91PS_Buffer); +typedef void (*AT91PF_PipeWriteCallBack) (AT91S_PipeStatus, void *); +typedef void (*AT91PF_PipeReadCallBack) (AT91S_PipeStatus, void *); +typedef AT91S_PipeStatus (*AT91PF_PipeWrite) (AT91PS_Pipe, char const *, unsigned int, void (*) (AT91S_PipeStatus, void *), void *); +typedef AT91S_PipeStatus (*AT91PF_PipeRead) (AT91PS_Pipe, char const *, unsigned int, void (*) (AT91S_PipeStatus, void *), void *); +typedef AT91S_PipeStatus (*AT91PF_PipeAbortWrite) (AT91PS_Pipe); +typedef AT91S_PipeStatus (*AT91PF_PipeAbortRead) (AT91PS_Pipe); +typedef AT91S_PipeStatus (*AT91PF_PipeReset) (AT91PS_Pipe); +typedef char (*AT91PF_PipeIsWritten) (AT91PS_Pipe, char const *); +typedef char (*AT91PF_PipeIsReceived) (AT91PS_Pipe, char const *); + +// This function is called by the application +extern AT91PS_Pipe AT91F_OpenPipe( + AT91PS_Pipe pPipe, + AT91PS_SvcComm pSvcComm, + AT91PS_Buffer pBuffer); + +// Following functions are called through AT91S_Pipe pointers + +extern AT91S_PipeStatus AT91F_PipeWrite( + AT91PS_Pipe pPipe, + char const *pVoid, + unsigned int size, + AT91PF_PipeWriteCallBack callback, + void *privateData); +extern AT91S_PipeStatus AT91F_PipeRead( + AT91PS_Pipe pPipe, + char *pVoid, + unsigned int Size, + AT91PF_PipeReadCallBack callback, + void *privateData); +extern AT91S_PipeStatus AT91F_PipeAbortWrite(AT91PS_Pipe pPipe); +extern AT91S_PipeStatus AT91F_PipeAbortRead(AT91PS_Pipe pPipe); +extern AT91S_PipeStatus AT91F_PipeReset(AT91PS_Pipe pPipe); +extern char AT91F_PipeMsgWritten(AT91PS_Pipe pPipe, char const *pVoid); +extern char AT91F_PipeMsgReceived(AT91PS_Pipe pPipe, char const *pVoid); + +#ifdef DBG_DRV_PIPE +// This function parse the error number and return a string +// describing the error message +extern char const *AT91F_PipeGetError(AT91S_PipeStatus msgId); +#endif + +extern const unsigned char bit_rev[256]; + +extern void CalculateCrc32(const unsigned char *,unsigned int, unsigned int *); +extern void CalculateCrc16(const unsigned char *, unsigned int , unsigned short *); +extern void CalculateCrcHdlc(const unsigned char *, unsigned int, unsigned short *); +extern void CalculateCrc16ccitt(const unsigned char *, unsigned int , unsigned short *); + +typedef const unsigned char* AT91PS_SVC_CRC_BIT_REV ; + +typedef void (*AT91PF_SVC_CRC32) (const unsigned char *, unsigned int, unsigned int *); +typedef void (*AT91PF_SVC_CRC16) (const unsigned char *, unsigned int, unsigned short *); +typedef void (*AT91PF_SVC_CRCHDLC) (const unsigned char *, unsigned int, unsigned short *); +typedef void (*AT91PF_SVC_CRCCCITT)(const unsigned char *, unsigned int , unsigned short *); + + +typedef short (*AT91PF_Sinus) (int angle); +typedef const short * AT91PS_SINE_TAB; + +extern short AT91F_Sinus(int angle); +extern const short AT91C_SINUS180_TAB[256]; + + +typedef void (TypeAICHandler) (void) ; + + +// ROM BOOT Structure Element Definition (liv v2) +typedef struct _AT91S_MEMCDesc +{ + AT91PS_MC memc_base ; /* Peripheral base */ + unsigned char periph_id ; /* MC Peripheral Identifier */ +} AT91S_MEMCDesc, *AT91PS_MEMCDesc ; + +typedef struct _AT91S_Pio2Desc +{ + AT91PS_PIO pio_base ; /* Base Address */ + unsigned char periph_id ; /* Peripheral Identifier */ + unsigned char pio_number ; /* Total Pin Number */ +} AT91S_Pio2Desc, *AT91PS_Pio2Desc ; + +typedef struct _AT91S_SPIDesc +{ + AT91PS_SPI spi_base ; + const AT91PS_PIO pio_base ; + unsigned char periph_id ; + unsigned char pin_spck ; + unsigned char pin_miso ; + unsigned char pin_mosi ; + unsigned char pin_npcs[4] ; +} AT91S_SPIDesc, *AT91PS_SPIDesc ; + +typedef struct _AT91S_USART2Desc +{ + AT91PS_USART usart_base ; /* Peripheral base */ + const AT91PS_PIO pio_base ; /* IO controller descriptor */ + unsigned int pin_rxd ; /* RXD pin number in the PIO */ + unsigned int pin_txd ; /* TXD pin number in the PIO */ + unsigned int pin_sck ; /* SCK pin number in the PIO */ + unsigned int pin_rts ; /* RTS pin number in the PIO */ + unsigned int pin_cts ; /* CTS pin number in the PIO */ + unsigned int pin_dtr ; /* DTR pin number in the PIO */ + unsigned int pin_ri ; /* RI pin number in the PIO */ + unsigned int pin_dsr ; /* DSR pin number in the PIO */ + unsigned int pin_dcd ; /* DCD pin number in the PIO */ + unsigned int periph_id ; /* USART Peripheral Identifier */ +} AT91S_USART2Desc, *AT91PS_USART2Desc ; + +typedef struct _AT91S_TWIDesc +{ + AT91PS_TWI TWI_base ; + const AT91PS_PIO pio_base ; + unsigned int pin_sck ; + unsigned int pin_sda ; + unsigned int periph_id; +}AT91S_TWIDesc, *AT91PS_TWIDesc; + +typedef struct _AT91S_STDesc +{ + AT91PS_ST st_base ; /* Peripheral base address */ + TypeAICHandler *AsmSTHandler ; /* Assembly interrupt handler */ + unsigned char PeriphId ; /* Peripheral Identifier */ +} AT91S_STDesc, *AT91PS_STDesc; + +typedef struct _AT91S_RomBoot { + const unsigned int version; + // Peripheral descriptors + const AT91S_MEMCDesc MEMC_DESC; + const AT91S_STDesc SYSTIMER_DESC; + const AT91S_Pio2Desc PIOA_DESC; + const AT91S_Pio2Desc PIOB_DESC; + const AT91S_USART2Desc DBGU_DESC; + const AT91S_USART2Desc USART0_DESC; + const AT91S_USART2Desc USART1_DESC; + const AT91S_USART2Desc USART2_DESC; + const AT91S_USART2Desc USART3_DESC; + const AT91S_TWIDesc TWI_DESC; + const AT91S_SPIDesc SPI_DESC; + + // Objects entry + const AT91PF_OpenPipe OpenPipe; + const AT91PF_OpenSBuffer OpenSBuffer; + const unsigned int reserved1; + const AT91PF_OpenSvcXmodem OpenSvcXmodem; + const AT91PF_OpenCtlTempo OpenCtlTempo; + const unsigned int reserved2; + const unsigned int reserved3; + const unsigned int reserved4; + const AT91PF_SVC_CRC16 CRC16; + const AT91PF_SVC_CRCCCITT CRCCCITT; + const AT91PF_SVC_CRCHDLC CRCHDLC; + const AT91PF_SVC_CRC32 CRC32; + const AT91PS_SVC_CRC_BIT_REV Bit_Reverse_Array; + const AT91PS_SINE_TAB SineTab; + const AT91PF_Sinus Sine; +} AT91S_RomBoot, *AT91PS_RomBoot; + +#define AT91C_ROM_BOOT_ADDRESS ((const AT91S_RomBoot *) ( *((unsigned int *) (AT91C_BASE_ROM + 0x20))) ) + +#endif + diff --git a/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h b/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h new file mode 100644 index 0000000..43d5835 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h @@ -0,0 +1,379 @@ +//*--------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - +//*--------------------------------------------------------------------------- +//* The software is delivered "AS IS" without warranty or condition of any +//* kind, either express, implied or statutory. This includes without +//* limitation any warranty or condition with respect to merchantability or +//* fitness for any particular purpose, or against the infringements of +//* intellectual property rights of others. +//*--------------------------------------------------------------------------- +//* File Name : AT91C_MCI_Device.h +//* Object : Data Flash Atmel Description File +//* Translator : +//* +//* 1.0 26/11/02 FB : Creation +//*--------------------------------------------------------------------------- + +#ifndef AT91C_MCI_Device_h +#define AT91C_MCI_Device_h + +#include "AT91RM9200.h" +#include "lib_AT91RM9200.h" + +typedef unsigned int AT91S_MCIDeviceStatus; + +///////////////////////////////////////////////////////////////////////////////////////////////////// + +#define AT91C_CARD_REMOVED 0 +#define AT91C_MMC_CARD_INSERTED 1 +#define AT91C_SD_CARD_INSERTED 2 + +#define AT91C_NO_ARGUMENT 0x0 + +#define AT91C_FIRST_RCA 0xCAFE +#define AT91C_MAX_MCI_CARDS 10 + +#define AT91C_BUS_WIDTH_1BIT 0x00 +#define AT91C_BUS_WIDTH_4BITS 0x02 + +/* Driver State */ +#define AT91C_MCI_IDLE 0x0 +#define AT91C_MCI_TIMEOUT_ERROR 0x1 +#define AT91C_MCI_RX_SINGLE_BLOCK 0x2 +#define AT91C_MCI_RX_MULTIPLE_BLOCK 0x3 +#define AT91C_MCI_RX_STREAM 0x4 +#define AT91C_MCI_TX_SINGLE_BLOCK 0x5 +#define AT91C_MCI_TX_MULTIPLE_BLOCK 0x6 +#define AT91C_MCI_TX_STREAM 0x7 + +/* TimeOut */ +#define AT91C_TIMEOUT_CMDRDY 30 + +///////////////////////////////////////////////////////////////////////////////////////////////////// +// MMC & SDCard Structures +///////////////////////////////////////////////////////////////////////////////////////////////////// + +/*-----------------------------------------------*/ +/* SDCard Device Descriptor Structure Definition */ +/*-----------------------------------------------*/ +typedef struct _AT91S_MciDeviceDesc +{ + volatile unsigned char state; + unsigned char SDCard_bus_width; + +} AT91S_MciDeviceDesc, *AT91PS_MciDeviceDesc; + +/*---------------------------------------------*/ +/* MMC & SDCard Structure Device Features */ +/*---------------------------------------------*/ +typedef struct _AT91S_MciDeviceFeatures +{ + unsigned char Card_Inserted; // (0=AT91C_CARD_REMOVED) (1=AT91C_MMC_CARD_INSERTED) (2=AT91C_SD_CARD_INSERTED) + unsigned int Relative_Card_Address; // RCA + unsigned int Max_Read_DataBlock_Length; // 2^(READ_BL_LEN) in CSD + unsigned int Max_Write_DataBlock_Length; // 2^(WRITE_BL_LEN) in CSD + unsigned char Read_Partial; // READ_BL_PARTIAL + unsigned char Write_Partial; // WRITE_BL_PARTIAL + unsigned char Erase_Block_Enable; // ERASE_BLK_EN + unsigned char Read_Block_Misalignment; // READ_BLK_MISALIGN + unsigned char Write_Block_Misalignment; // WRITE_BLK_MISALIGN + unsigned char Sector_Size; // SECTOR_SIZE + unsigned int Memory_Capacity; // Size in bits of the device + +} AT91S_MciDeviceFeatures, *AT91PS_MciDeviceFeatures ; + +/*---------------------------------------------*/ +/* MCI Device Structure Definition */ +/*---------------------------------------------*/ +typedef struct _AT91S_MciDevice +{ + AT91PS_MciDeviceDesc pMCI_DeviceDesc; // MCI device descriptor + AT91PS_MciDeviceFeatures pMCI_DeviceFeatures;// Pointer on a MCI device features array +}AT91S_MciDevice, *AT91PS_MciDevice; + +///////////////////////////////////////////////////////////////////////////////////////////////////// +// MCI_CMD Register Value +///////////////////////////////////////////////////////////////////////////////////////////////////// +#define AT91C_POWER_ON_INIT (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_INIT | AT91C_MCI_OPDCMD) + +///////////////////////////////////////////////////////////////// +// Class 0 & 1 commands: Basic commands and Read Stream commands +///////////////////////////////////////////////////////////////// + +#define AT91C_GO_IDLE_STATE_CMD (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE ) +#define AT91C_MMC_GO_IDLE_STATE_CMD (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_OPDCMD) +#define AT91C_MMC_SEND_OP_COND_CMD (1 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_OPDCMD) +#define AT91C_ALL_SEND_CID_CMD (2 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 ) +#define AT91C_MMC_ALL_SEND_CID_CMD (2 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_OPDCMD) +#define AT91C_SET_RELATIVE_ADDR_CMD (3 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) +#define AT91C_MMC_SET_RELATIVE_ADDR_CMD (3 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT | AT91C_MCI_OPDCMD) + +#define AT91C_SET_DSR_CMD (4 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_NO | AT91C_MCI_MAXLAT ) // no tested + +#define AT91C_SEL_DESEL_CARD_CMD (7 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) +#define AT91C_SEND_CSD_CMD (9 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_MAXLAT ) +#define AT91C_SEND_CID_CMD (10 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_MAXLAT ) +#define AT91C_MMC_READ_DAT_UNTIL_STOP_CMD (11 | AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRDIR | AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT ) + +#define AT91C_STOP_TRANSMISSION_CMD (12 | AT91C_MCI_TRCMD_STOP | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) +#define AT91C_STOP_TRANSMISSION_SYNC_CMD (12 | AT91C_MCI_TRCMD_STOP | AT91C_MCI_SPCMD_SYNC | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) +#define AT91C_SEND_STATUS_CMD (13 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) +#define AT91C_GO_INACTIVE_STATE_CMD (15 | AT91C_MCI_RSPTYP_NO ) + +//*------------------------------------------------ +//* Class 2 commands: Block oriented Read commands +//*------------------------------------------------ + +#define AT91C_SET_BLOCKLEN_CMD (16 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) +#define AT91C_READ_SINGLE_BLOCK_CMD (17 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | AT91C_MCI_TRTYP_BLOCK | AT91C_MCI_TRDIR | AT91C_MCI_MAXLAT) +#define AT91C_READ_MULTIPLE_BLOCK_CMD (18 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | AT91C_MCI_TRTYP_MULTIPLE | AT91C_MCI_TRDIR | AT91C_MCI_MAXLAT) + +//*-------------------------------------------- +//* Class 3 commands: Sequential write commands +//*-------------------------------------------- + +#define AT91C_MMC_WRITE_DAT_UNTIL_STOP_CMD (20 | AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 & ~(AT91C_MCI_TRDIR) | AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT ) // MMC + +//*------------------------------------------------ +//* Class 4 commands: Block oriented write commands +//*------------------------------------------------ + +#define AT91C_WRITE_BLOCK_CMD (24 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | (AT91C_MCI_TRTYP_BLOCK & ~(AT91C_MCI_TRDIR)) | AT91C_MCI_MAXLAT) +#define AT91C_WRITE_MULTIPLE_BLOCK_CMD (25 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | (AT91C_MCI_TRTYP_MULTIPLE & ~(AT91C_MCI_TRDIR)) | AT91C_MCI_MAXLAT) +#define AT91C_PROGRAM_CSD_CMD (27 | AT91C_MCI_RSPTYP_48 ) + + +//*---------------------------------------- +//* Class 6 commands: Group Write protect +//*---------------------------------------- + +#define AT91C_SET_WRITE_PROT_CMD (28 | AT91C_MCI_RSPTYP_48 ) +#define AT91C_CLR_WRITE_PROT_CMD (29 | AT91C_MCI_RSPTYP_48 ) +#define AT91C_SEND_WRITE_PROT_CMD (30 | AT91C_MCI_RSPTYP_48 ) + + +//*---------------------------------------- +//* Class 5 commands: Erase commands +//*---------------------------------------- + +#define AT91C_TAG_SECTOR_START_CMD (32 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) +#define AT91C_TAG_SECTOR_END_CMD (33 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) +#define AT91C_MMC_UNTAG_SECTOR_CMD (34 | AT91C_MCI_RSPTYP_48 ) +#define AT91C_MMC_TAG_ERASE_GROUP_START_CMD (35 | AT91C_MCI_RSPTYP_48 ) +#define AT91C_MMC_TAG_ERASE_GROUP_END_CMD (36 | AT91C_MCI_RSPTYP_48 ) +#define AT91C_MMC_UNTAG_ERASE_GROUP_CMD (37 | AT91C_MCI_RSPTYP_48 ) +#define AT91C_ERASE_CMD (38 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT ) + +//*---------------------------------------- +//* Class 7 commands: Lock commands +//*---------------------------------------- + +#define AT91C_LOCK_UNLOCK (42 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) // no tested + +//*----------------------------------------------- +// Class 8 commands: Application specific commands +//*----------------------------------------------- + +#define AT91C_APP_CMD (55 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) +#define AT91C_GEN_CMD (56 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) // no tested + +#define AT91C_SDCARD_SET_BUS_WIDTH_CMD (6 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) +#define AT91C_SDCARD_STATUS_CMD (13 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) +#define AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD (22 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) +#define AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD (23 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) +#define AT91C_SDCARD_APP_OP_COND_CMD (41 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO ) +#define AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD (42 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) +#define AT91C_SDCARD_SEND_SCR_CMD (51 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) + +#define AT91C_SDCARD_APP_ALL_CMD (AT91C_SDCARD_SET_BUS_WIDTH_CMD +\ + AT91C_SDCARD_STATUS_CMD +\ + AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD +\ + AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD +\ + AT91C_SDCARD_APP_OP_COND_CMD +\ + AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD +\ + AT91C_SDCARD_SEND_SCR_CMD) + +//*---------------------------------------- +//* Class 9 commands: IO Mode commands +//*---------------------------------------- + +#define AT91C_MMC_FAST_IO_CMD (39 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT) +#define AT91C_MMC_GO_IRQ_STATE_CMD (40 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) + +///////////////////////////////////////////////////////////////////////////////////////////////////// +// Functions returnals +///////////////////////////////////////////////////////////////////////////////////////////////////// +#define AT91C_CMD_SEND_OK 0 // Command ok +#define AT91C_CMD_SEND_ERROR -1 // Command failed +#define AT91C_INIT_OK 2 // Init Successfull +#define AT91C_INIT_ERROR 3 // Init Failed +#define AT91C_READ_OK 4 // Read Successfull +#define AT91C_READ_ERROR 5 // Read Failed +#define AT91C_WRITE_OK 6 // Write Successfull +#define AT91C_WRITE_ERROR 7 // Write Failed +#define AT91C_ERASE_OK 8 // Erase Successfull +#define AT91C_ERASE_ERROR 9 // Erase Failed +#define AT91C_CARD_SELECTED_OK 10 // Card Selection Successfull +#define AT91C_CARD_SELECTED_ERROR 11 // Card Selection Failed + +///////////////////////////////////////////////////////////////////////////////////////////////////// +// MCI_SR Errors +///////////////////////////////////////////////////////////////////////////////////////////////////// +#define AT91C_MCI_SR_ERROR (AT91C_MCI_UNRE |\ + AT91C_MCI_OVRE |\ + AT91C_MCI_DTOE |\ + AT91C_MCI_DCRCE |\ + AT91C_MCI_RTOE |\ + AT91C_MCI_RENDE |\ + AT91C_MCI_RCRCE |\ + AT91C_MCI_RDIRE |\ + AT91C_MCI_RINDE) + +//////////////////////////////////////////////////////////////////////////////////////////////////// +// OCR Register +//////////////////////////////////////////////////////////////////////////////////////////////////// +#define AT91C_VDD_16_17 (1 << 4) +#define AT91C_VDD_17_18 (1 << 5) +#define AT91C_VDD_18_19 (1 << 6) +#define AT91C_VDD_19_20 (1 << 7) +#define AT91C_VDD_20_21 (1 << 8) +#define AT91C_VDD_21_22 (1 << 9) +#define AT91C_VDD_22_23 (1 << 10) +#define AT91C_VDD_23_24 (1 << 11) +#define AT91C_VDD_24_25 (1 << 12) +#define AT91C_VDD_25_26 (1 << 13) +#define AT91C_VDD_26_27 (1 << 14) +#define AT91C_VDD_27_28 (1 << 15) +#define AT91C_VDD_28_29 (1 << 16) +#define AT91C_VDD_29_30 (1 << 17) +#define AT91C_VDD_30_31 (1 << 18) +#define AT91C_VDD_31_32 (1 << 19) +#define AT91C_VDD_32_33 (1 << 20) +#define AT91C_VDD_33_34 (1 << 21) +#define AT91C_VDD_34_35 (1 << 22) +#define AT91C_VDD_35_36 (1 << 23) +#define AT91C_CARD_POWER_UP_BUSY (1 << 31) + +#define AT91C_MMC_HOST_VOLTAGE_RANGE (AT91C_VDD_27_28 +\ + AT91C_VDD_28_29 +\ + AT91C_VDD_29_30 +\ + AT91C_VDD_30_31 +\ + AT91C_VDD_31_32 +\ + AT91C_VDD_32_33) + +//////////////////////////////////////////////////////////////////////////////////////////////////// +// CURRENT_STATE & READY_FOR_DATA in SDCard Status Register definition (response type R1) +//////////////////////////////////////////////////////////////////////////////////////////////////// +#define AT91C_SR_READY_FOR_DATA (1 << 8) // corresponds to buffer empty signalling on the bus +#define AT91C_SR_IDLE (0 << 9) +#define AT91C_SR_READY (1 << 9) +#define AT91C_SR_IDENT (2 << 9) +#define AT91C_SR_STBY (3 << 9) +#define AT91C_SR_TRAN (4 << 9) +#define AT91C_SR_DATA (5 << 9) +#define AT91C_SR_RCV (6 << 9) +#define AT91C_SR_PRG (7 << 9) +#define AT91C_SR_DIS (8 << 9) + +#define AT91C_SR_CARD_SELECTED (AT91C_SR_READY_FOR_DATA + AT91C_SR_TRAN) + +///////////////////////////////////////////////////////////////////////////////////////////////////// +// MMC CSD register header File +// AT91C_CSD_xxx_S for shift value +// AT91C_CSD_xxx_M for mask value +///////////////////////////////////////////////////////////////////////////////////////////////////// + +// First Response INT <=> CSD[3] : bits 0 to 31 +#define AT91C_CSD_BIT0_S 0 // [0:0] +#define AT91C_CSD_BIT0_M 0x01 +#define AT91C_CSD_CRC_S 1 // [7:1] +#define AT91C_CSD_CRC_M 0x7F +#define AT91C_CSD_MMC_ECC_S 8 // [9:8] reserved for MMC compatibility +#define AT91C_CSD_MMC_ECC_M 0x03 +#define AT91C_CSD_FILE_FMT_S 10 // [11:10] +#define AT91C_CSD_FILE_FMT_M 0x03 +#define AT91C_CSD_TMP_WP_S 12 // [12:12] +#define AT91C_CSD_TMP_WP_M 0x01 +#define AT91C_CSD_PERM_WP_S 13 // [13:13] +#define AT91C_CSD_PERM_WP_M 0x01 +#define AT91C_CSD_COPY_S 14 // [14:14] +#define AT91C_CSD_COPY_M 0x01 +#define AT91C_CSD_FILE_FMT_GRP_S 15 // [15:15] +#define AT91C_CSD_FILE_FMT_GRP_M 0x01 +// reserved 16 // [20:16] +// reserved 0x1F +#define AT91C_CSD_WBLOCK_P_S 21 // [21:21] +#define AT91C_CSD_WBLOCK_P_M 0x01 +#define AT91C_CSD_WBLEN_S 22 // [25:22] +#define AT91C_CSD_WBLEN_M 0x0F +#define AT91C_CSD_R2W_F_S 26 // [28:26] +#define AT91C_CSD_R2W_F_M 0x07 +#define AT91C_CSD_MMC_DEF_ECC_S 29 // [30:29] reserved for MMC compatibility +#define AT91C_CSD_MMC_DEF_ECC_M 0x03 +#define AT91C_CSD_WP_GRP_EN_S 31 // [31:31] +#define AT91C_CSD_WP_GRP_EN_M 0x01 + +// Seconde Response INT <=> CSD[2] : bits 32 to 63 +#define AT91C_CSD_v21_WP_GRP_SIZE_S 0 // [38:32] +#define AT91C_CSD_v21_WP_GRP_SIZE_M 0x7F +#define AT91C_CSD_v21_SECT_SIZE_S 7 // [45:39] +#define AT91C_CSD_v21_SECT_SIZE_M 0x7F +#define AT91C_CSD_v21_ER_BLEN_EN_S 14 // [46:46] +#define AT91C_CSD_v21_ER_BLEN_EN_M 0x01 + +#define AT91C_CSD_v22_WP_GRP_SIZE_S 0 // [36:32] +#define AT91C_CSD_v22_WP_GRP_SIZE_M 0x1F +#define AT91C_CSD_v22_ER_GRP_SIZE_S 5 // [41:37] +#define AT91C_CSD_v22_ER_GRP_SIZE_M 0x1F +#define AT91C_CSD_v22_SECT_SIZE_S 10 // [46:42] +#define AT91C_CSD_v22_SECT_SIZE_M 0x1F + +#define AT91C_CSD_C_SIZE_M_S 15 // [49:47] +#define AT91C_CSD_C_SIZE_M_M 0x07 +#define AT91C_CSD_VDD_WMAX_S 18 // [52:50] +#define AT91C_CSD_VDD_WMAX_M 0x07 +#define AT91C_CSD_VDD_WMIN_S 21 // [55:53] +#define AT91C_CSD_VDD_WMIN_M 0x07 +#define AT91C_CSD_RCUR_MAX_S 24 // [58:56] +#define AT91C_CSD_RCUR_MAX_M 0x07 +#define AT91C_CSD_RCUR_MIN_S 27 // [61:59] +#define AT91C_CSD_RCUR_MIN_M 0x07 +#define AT91C_CSD_CSIZE_L_S 30 // [63:62] <=> 2 LSB of CSIZE +#define AT91C_CSD_CSIZE_L_M 0x03 + +// Third Response INT <=> CSD[1] : bits 64 to 95 +#define AT91C_CSD_CSIZE_H_S 0 // [73:64] <=> 10 MSB of CSIZE +#define AT91C_CSD_CSIZE_H_M 0x03FF +// reserved 10 // [75:74] +// reserved 0x03 +#define AT91C_CSD_DSR_I_S 12 // [76:76] +#define AT91C_CSD_DSR_I_M 0x01 +#define AT91C_CSD_RD_B_MIS_S 13 // [77:77] +#define AT91C_CSD_RD_B_MIS_M 0x01 +#define AT91C_CSD_WR_B_MIS_S 14 // [78:78] +#define AT91C_CSD_WR_B_MIS_M 0x01 +#define AT91C_CSD_RD_B_PAR_S 15 // [79:79] +#define AT91C_CSD_RD_B_PAR_M 0x01 +#define AT91C_CSD_RD_B_LEN_S 16 // [83:80] +#define AT91C_CSD_RD_B_LEN_M 0x0F +#define AT91C_CSD_CCC_S 20 // [95:84] +#define AT91C_CSD_CCC_M 0x0FFF + +// Fourth Response INT <=> CSD[0] : bits 96 to 127 +#define AT91C_CSD_TRANS_SPEED_S 0 // [103:96] +#define AT91C_CSD_TRANS_SPEED_M 0xFF +#define AT91C_CSD_NSAC_S 8 // [111:104] +#define AT91C_CSD_NSAC_M 0xFF +#define AT91C_CSD_TAAC_S 16 // [119:112] +#define AT91C_CSD_TAAC_M 0xFF +// reserved 24 // [121:120] +// reserved 0x03 +#define AT91C_CSD_MMC_SPEC_VERS_S 26 // [125:122] reserved for MMC compatibility +#define AT91C_CSD_MMC_SPEC_VERS_M 0x0F +#define AT91C_CSD_STRUCT_S 30 // [127:126] +#define AT91C_CSD_STRUCT_M 0x03 + +///////////////////////////////////////////////////////////////////////////////////////////////////// + +#endif + diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200.h b/target/linux/at91/image/dfboot/src/include/AT91RM9200.h new file mode 100644 index 0000000..0cd153b --- /dev/null +++ b/target/linux/at91/image/dfboot/src/include/AT91RM9200.h @@ -0,0 +1,2745 @@ +// ---------------------------------------------------------------------------- +// ATMEL Microcontroller Software Support - ROUSSET - +// ---------------------------------------------------------------------------- +// The software is delivered "AS IS" without warranty or condition of any +// kind, either express, implied or statutory. This includes without +// limitation any warranty or condition with respect to merchantability or +// fitness for any particular purpose, or against the infringements of +// intellectual property rights of others. +// ---------------------------------------------------------------------------- +// File Name : AT91RM9200.h +// Object : AT91RM9200 definitions +// Generated : AT91 SW Application Group 11/19/2003 (17:20:50) +// +// CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// +// CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// +// CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// +// CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// +// CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// +// CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// +// CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// +// CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// +// CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// +// CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// +// CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// +// CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// +// CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// +// CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// +// CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// +// CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// +// CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// +// CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// +// CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// +// CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// +// CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// +// CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// +// CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// +// ---------------------------------------------------------------------------- + +#ifndef AT91RM9200_H +#define AT91RM9200_H + +typedef volatile unsigned int AT91_REG;// Hardware register definition + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR System Peripherals +// ***************************************************************************** +typedef struct _AT91S_SYS { + AT91_REG AIC_SMR[32]; // Source Mode Register + AT91_REG AIC_SVR[32]; // Source Vector Register + AT91_REG AIC_IVR; // IRQ Vector Register + AT91_REG AIC_FVR; // FIQ Vector Register + AT91_REG AIC_ISR; // Interrupt Status Register + AT91_REG AIC_IPR; // Interrupt Pending Register + AT91_REG AIC_IMR; // Interrupt Mask Register + AT91_REG AIC_CISR; // Core Interrupt Status Register + AT91_REG Reserved0[2]; // + AT91_REG AIC_IECR; // Interrupt Enable Command Register + AT91_REG AIC_IDCR; // Interrupt Disable Command Register + AT91_REG AIC_ICCR; // Interrupt Clear Command Register + AT91_REG AIC_ISCR; // Interrupt Set Command Register + AT91_REG AIC_EOICR; // End of Interrupt Command Register + AT91_REG AIC_SPU; // Spurious Vector Register + AT91_REG AIC_DCR; // Debug Control Register (Protect) + AT91_REG Reserved1[1]; // + AT91_REG AIC_FFER; // Fast Forcing Enable Register + AT91_REG AIC_FFDR; // Fast Forcing Disable Register + AT91_REG AIC_FFSR; // Fast Forcing Status Register + AT91_REG Reserved2[45]; // + AT91_REG DBGU_CR; // Control Register + AT91_REG DBGU_MR; // Mode Register + AT91_REG DBGU_IER; // Interrupt Enable Register + AT91_REG DBGU_IDR; // Interrupt Disable Register + AT91_REG DBGU_IMR; // Interrupt Mask Register + AT91_REG DBGU_CSR; // Channel Status Register + AT91_REG DBGU_RHR; // Receiver Holding Register + AT91_REG DBGU_THR; // Transmitter Holding Register + AT91_REG DBGU_BRGR; // Baud Rate Generator Register + AT91_REG Reserved3[7]; // + AT91_REG DBGU_C1R; // Chip ID1 Register + AT91_REG DBGU_C2R; // Chip ID2 Register + AT91_REG DBGU_FNTR; // Force NTRST Register + AT91_REG Reserved4[45]; // + AT91_REG DBGU_RPR; // Receive Pointer Register + AT91_REG DBGU_RCR; // Receive Counter Register + AT91_REG DBGU_TPR; // Transmit Pointer Register + AT91_REG DBGU_TCR; // Transmit Counter Register + AT91_REG DBGU_RNPR; // Receive Next Pointer Register + AT91_REG DBGU_RNCR; // Receive Next Counter Register + AT91_REG DBGU_TNPR; // Transmit Next Pointer Register + AT91_REG DBGU_TNCR; // Transmit Next Counter Register + AT91_REG DBGU_PTCR; // PDC Transfer Control Register + AT91_REG DBGU_PTSR; // PDC Transfer Status Register + AT91_REG Reserved5[54]; // + AT91_REG PIOA_PER; // PIO Enable Register + AT91_REG PIOA_PDR; // PIO Disable Register + AT91_REG PIOA_PSR; // PIO Status Register + AT91_REG Reserved6[1]; // + AT91_REG PIOA_OER; // Output Enable Register + AT91_REG PIOA_ODR; // Output Disable Registerr + AT91_REG PIOA_OSR; // Output Status Register + AT91_REG Reserved7[1]; // + AT91_REG PIOA_IFER; // Input Filter Enable Register + AT91_REG PIOA_IFDR; // Input Filter Disable Register + AT91_REG PIOA_IFSR; // Input Filter Status Register + AT91_REG Reserved8[1]; // + AT91_REG PIOA_SODR; // Set Output Data Register + AT91_REG PIOA_CODR; // Clear Output Data Register + AT91_REG PIOA_ODSR; // Output Data Status Register + AT91_REG PIOA_PDSR; // Pin Data Status Register + AT91_REG PIOA_IER; // Interrupt Enable Register + AT91_REG PIOA_IDR; // Interrupt Disable Register + AT91_REG PIOA_IMR; // Interrupt Mask Register + AT91_REG PIOA_ISR; // Interrupt Status Register + AT91_REG PIOA_MDER; // Multi-driver Enable Register + AT91_REG PIOA_MDDR; // Multi-driver Disable Register + AT91_REG PIOA_MDSR; // Multi-driver Status Register + AT91_REG Reserved9[1]; // + AT91_REG PIOA_PPUDR; // Pull-up Disable Register + AT91_REG PIOA_PPUER; // Pull-up Enable Register + AT91_REG PIOA_PPUSR; // Pad Pull-up Status Register + AT91_REG Reserved10[1]; // + AT91_REG PIOA_ASR; // Select A Register + AT91_REG PIOA_BSR; // Select B Register + AT91_REG PIOA_ABSR; // AB Select Status Register + AT91_REG Reserved11[9]; // + AT91_REG PIOA_OWER; // Output Write Enable Register + AT91_REG PIOA_OWDR; // Output Write Disable Register + AT91_REG PIOA_OWSR; // Output Write Status Register + AT91_REG Reserved12[85]; // + AT91_REG PIOB_PER; // PIO Enable Register + AT91_REG PIOB_PDR; // PIO Disable Register + AT91_REG PIOB_PSR; // PIO Status Register + AT91_REG Reserved13[1]; // + AT91_REG PIOB_OER; // Output Enable Register + AT91_REG PIOB_ODR; // Output Disable Registerr + AT91_REG PIOB_OSR; // Output Status Register + AT91_REG Reserved14[1]; // + AT91_REG PIOB_IFER; // Input Filter Enable Register + AT91_REG PIOB_IFDR; // Input Filter Disable Register + AT91_REG PIOB_IFSR; // Input Filter Status Register + AT91_REG Reserved15[1]; // + AT91_REG PIOB_SODR; // Set Output Data Register + AT91_REG PIOB_CODR; // Clear Output Data Register + AT91_REG PIOB_ODSR; // Output Data Status Register + AT91_REG PIOB_PDSR; // Pin Data Status Register + AT91_REG PIOB_IER; // Interrupt Enable Register + AT91_REG PIOB_IDR; // Interrupt Disable Register + AT91_REG PIOB_IMR; // Interrupt Mask Register + AT91_REG PIOB_ISR; // Interrupt Status Register + AT91_REG PIOB_MDER; // Multi-driver Enable Register + AT91_REG PIOB_MDDR; // Multi-driver Disable Register + AT91_REG PIOB_MDSR; // Multi-driver Status Register + AT91_REG Reserved16[1]; // + AT91_REG PIOB_PPUDR; // Pull-up Disable Register + AT91_REG PIOB_PPUER; // Pull-up Enable Register + AT91_REG PIOB_PPUSR; // Pad Pull-up Status Register + AT91_REG Reserved17[1]; // + AT91_REG PIOB_ASR; // Select A Register + AT91_REG PIOB_BSR; // Select B Register + AT91_REG PIOB_ABSR; // AB Select Status Register + AT91_REG Reserved18[9]; // + AT91_REG PIOB_OWER; // Output Write Enable Register + AT91_REG PIOB_OWDR; // Output Write Disable Register + AT91_REG PIOB_OWSR; // Output Write Status Register + AT91_REG Reserved19[85]; // + AT91_REG PIOC_PER; // PIO Enable Register + AT91_REG PIOC_PDR; // PIO Disable Register + AT91_REG PIOC_PSR; // PIO Status Register + AT91_REG Reserved20[1]; // + AT91_REG PIOC_OER; // Output Enable Register + AT91_REG PIOC_ODR; // Output Disable Registerr + AT91_REG PIOC_OSR; // Output Status Register + AT91_REG Reserved21[1]; // + AT91_REG PIOC_IFER; // Input Filter Enable Register + AT91_REG PIOC_IFDR; // Input Filter Disable Register + AT91_REG PIOC_IFSR; // Input Filter Status Register + AT91_REG Reserved22[1]; // + AT91_REG PIOC_SODR; // Set Output Data Register + AT91_REG PIOC_CODR; // Clear Output Data Register + AT91_REG PIOC_ODSR; // Output Data Status Register + AT91_REG PIOC_PDSR; // Pin Data Status Register + AT91_REG PIOC_IER; // Interrupt Enable Register + AT91_REG PIOC_IDR; // Interrupt Disable Register + AT91_REG PIOC_IMR; // Interrupt Mask Register + AT91_REG PIOC_ISR; // Interrupt Status Register + AT91_REG PIOC_MDER; // Multi-driver Enable Register + AT91_REG PIOC_MDDR; // Multi-driver Disable Register + AT91_REG PIOC_MDSR; // Multi-driver Status Register + AT91_REG Reserved23[1]; // + AT91_REG PIOC_PPUDR; // Pull-up Disable Register + AT91_REG PIOC_PPUER; // Pull-up Enable Register + AT91_REG PIOC_PPUSR; // Pad Pull-up Status Register + AT91_REG Reserved24[1]; // + AT91_REG PIOC_ASR; // Select A Register + AT91_REG PIOC_BSR; // Select B Register + AT91_REG PIOC_ABSR; // AB Select Status Register + AT91_REG Reserved25[9]; // + AT91_REG PIOC_OWER; // Output Write Enable Register + AT91_REG PIOC_OWDR; // Output Write Disable Register + AT91_REG PIOC_OWSR; // Output Write Status Register + AT91_REG Reserved26[85]; // + AT91_REG PIOD_PER; // PIO Enable Register + AT91_REG PIOD_PDR; // PIO Disable Register + AT91_REG PIOD_PSR; // PIO Status Register + AT91_REG Reserved27[1]; // + AT91_REG PIOD_OER; // Output Enable Register + AT91_REG PIOD_ODR; // Output Disable Registerr + AT91_REG PIOD_OSR; // Output Status Register + AT91_REG Reserved28[1]; // + AT91_REG PIOD_IFER; // Input Filter Enable Register + AT91_REG PIOD_IFDR; // Input Filter Disable Register + AT91_REG PIOD_IFSR; // Input Filter Status Register + AT91_REG Reserved29[1]; // + AT91_REG PIOD_SODR; // Set Output Data Register + AT91_REG PIOD_CODR; // Clear Output Data Register + AT91_REG PIOD_ODSR; // Output Data Status Register + AT91_REG PIOD_PDSR; // Pin Data Status Register + AT91_REG PIOD_IER; // Interrupt Enable Register + AT91_REG PIOD_IDR; // Interrupt Disable Register + AT91_REG PIOD_IMR; // Interrupt Mask Register + AT91_REG PIOD_ISR; // Interrupt Status Register + AT91_REG PIOD_MDER; // Multi-driver Enable Register + AT91_REG PIOD_MDDR; // Multi-driver Disable Register + AT91_REG PIOD_MDSR; // Multi-driver Status Register + AT91_REG Reserved30[1]; // + AT91_REG PIOD_PPUDR; // Pull-up Disable Register + AT91_REG PIOD_PPUER; // Pull-up Enable Register + AT91_REG PIOD_PPUSR; // Pad Pull-up Status Register + AT91_REG Reserved31[1]; // + AT91_REG PIOD_ASR; // Select A Register + AT91_REG PIOD_BSR; // Select B Register + AT91_REG PIOD_ABSR; // AB Select Status Register + AT91_REG Reserved32[9]; // + AT91_REG PIOD_OWER; // Output Write Enable Register + AT91_REG PIOD_OWDR; // Output Write Disable Register + AT91_REG PIOD_OWSR; // Output Write Status Register + AT91_REG Reserved33[85]; // + AT91_REG PMC_SCER; // System Clock Enable Register + AT91_REG PMC_SCDR; // System Clock Disable Register + AT91_REG PMC_SCSR; // System Clock Status Register + AT91_REG Reserved34[1]; // + AT91_REG PMC_PCER; // Peripheral Clock Enable Register + AT91_REG PMC_PCDR; // Peripheral Clock Disable Register + AT91_REG PMC_PCSR; // Peripheral Clock Status Register + AT91_REG Reserved35[1]; // + AT91_REG CKGR_MOR; // Main Oscillator Register + AT91_REG CKGR_MCFR; // Main Clock Frequency Register + AT91_REG CKGR_PLLAR; // PLL A Register + AT91_REG CKGR_PLLBR; // PLL B Register + AT91_REG PMC_MCKR; // Master Clock Register + AT91_REG Reserved36[3]; // + AT91_REG PMC_PCKR[8]; // Programmable Clock Register + AT91_REG PMC_IER; // Interrupt Enable Register + AT91_REG PMC_IDR; // Interrupt Disable Register + AT91_REG PMC_SR; // Status Register + AT91_REG PMC_IMR; // Interrupt Mask Register + AT91_REG Reserved37[36]; // + AT91_REG ST_CR; // Control Register + AT91_REG ST_PIMR; // Period Interval Mode Register + AT91_REG ST_WDMR; // Watchdog Mode Register + AT91_REG ST_RTMR; // Real-time Mode Register + AT91_REG ST_SR; // Status Register + AT91_REG ST_IER; // Interrupt Enable Register + AT91_REG ST_IDR; // Interrupt Disable Register + AT91_REG ST_IMR; // Interrupt Mask Register + AT91_REG ST_RTAR; // Real-time Alarm Register + AT91_REG ST_CRTR; // Current Real-time Register + AT91_REG Reserved38[54]; // + AT91_REG RTC_CR; // Control Register + AT91_REG RTC_MR; // Mode Register + AT91_REG RTC_TIMR; // Time Register + AT91_REG RTC_CALR; // Calendar Register + AT91_REG RTC_TIMALR; // Time Alarm Register + AT91_REG RTC_CALALR; // Calendar Alarm Register + AT91_REG RTC_SR; // Status Register + AT91_REG RTC_SCCR; // Status Clear Command Register + AT91_REG RTC_IER; // Interrupt Enable Register + AT91_REG RTC_IDR; // Interrupt Disable Register + AT91_REG RTC_IMR; // Interrupt Mask Register + AT91_REG RTC_VER; // Valid Entry Register + AT91_REG Reserved39[52]; // + AT91_REG MC_RCR; // MC Remap Control Register + AT91_REG MC_ASR; // MC Abort Status Register + AT91_REG MC_AASR; // MC Abort Address Status Register + AT91_REG Reserved40[1]; // + AT91_REG MC_PUIA[16]; // MC Protection Unit Area + AT91_REG MC_PUP; // MC Protection Unit Peripherals + AT91_REG MC_PUER; // MC Protection Unit Enable Register + AT91_REG Reserved41[2]; // + AT91_REG EBI_CSA; // Chip Select Assignment Register + AT91_REG EBI_CFGR; // Configuration Register + AT91_REG Reserved42[2]; // + AT91_REG EBI_SMC2_CSR[8]; // SMC2 Chip Select Register + AT91_REG EBI_SDRC_MR; // SDRAM Controller Mode Register + AT91_REG EBI_SDRC_TR; // SDRAM Controller Refresh Timer Register + AT91_REG EBI_SDRC_CR; // SDRAM Controller Configuration Register + AT91_REG EBI_SDRC_SRR; // SDRAM Controller Self Refresh Register + AT91_REG EBI_SDRC_LPR; // SDRAM Controller Low Power Register + AT91_REG EBI_SDRC_IER; // SDRAM Controller Interrupt Enable Register + AT91_REG EBI_SDRC_IDR; // SDRAM Controller Interrupt Disable Register + AT91_REG EBI_SDRC_IMR; // SDRAM Controller Interrupt Mask Register + AT91_REG EBI_SDRC_ISR; // SDRAM Controller Interrupt Mask Register + AT91_REG Reserved43[3]; // + AT91_REG EBI_BFC_MR; // BFC Mode Register +} AT91S_SYS, *AT91PS_SYS; + + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Memory Controller Interface +// ***************************************************************************** +typedef struct _AT91S_MC { + AT91_REG MC_RCR; // MC Remap Control Register + AT91_REG MC_ASR; // MC Abort Status Register + AT91_REG MC_AASR; // MC Abort Address Status Register + AT91_REG Reserved0[1]; // + AT91_REG MC_PUIA[16]; // MC Protection Unit Area + AT91_REG MC_PUP; // MC Protection Unit Peripherals + AT91_REG MC_PUER; // MC Protection Unit Enable Register +} AT91S_MC, *AT91PS_MC; + +// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- +#define AT91C_MC_RCB ((unsigned int) 0x1 << 0) // (MC) Remap Command Bit +// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- +#define AT91C_MC_UNDADD ((unsigned int) 0x1 << 0) // (MC) Undefined Addess Abort Status +#define AT91C_MC_MISADD ((unsigned int) 0x1 << 1) // (MC) Misaligned Addess Abort Status +#define AT91C_MC_MPU ((unsigned int) 0x1 << 2) // (MC) Memory protection Unit Abort Status +#define AT91C_MC_ABTSZ ((unsigned int) 0x3 << 8) // (MC) Abort Size Status +#define AT91C_MC_ABTSZ_BYTE ((unsigned int) 0x0 << 8) // (MC) Byte +#define AT91C_MC_ABTSZ_HWORD ((unsigned int) 0x1 << 8) // (MC) Half-word +#define AT91C_MC_ABTSZ_WORD ((unsigned int) 0x2 << 8) // (MC) Word +#define AT91C_MC_ABTTYP ((unsigned int) 0x3 << 10) // (MC) Abort Type Status +#define AT91C_MC_ABTTYP_DATAR ((unsigned int) 0x0 << 10) // (MC) Data Read +#define AT91C_MC_ABTTYP_DATAW ((unsigned int) 0x1 << 10) // (MC) Data Write +#define AT91C_MC_ABTTYP_FETCH ((unsigned int) 0x2 << 10) // (MC) Code Fetch +#define AT91C_MC_MST0 ((unsigned int) 0x1 << 16) // (MC) Master 0 Abort Source +#define AT91C_MC_MST1 ((unsigned int) 0x1 << 17) // (MC) Master 1 Abort Source +#define AT91C_MC_SVMST0 ((unsigned int) 0x1 << 24) // (MC) Saved Master 0 Abort Source +#define AT91C_MC_SVMST1 ((unsigned int) 0x1 << 25) // (MC) Saved Master 1 Abort Source +// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- +#define AT91C_MC_PROT ((unsigned int) 0x3 << 0) // (MC) Protection +#define AT91C_MC_PROT_PNAUNA ((unsigned int) 0x0) // (MC) Privilege: No Access, User: No Access +#define AT91C_MC_PROT_PRWUNA ((unsigned int) 0x1) // (MC) Privilege: Read/Write, User: No Access +#define AT91C_MC_PROT_PRWURO ((unsigned int) 0x2) // (MC) Privilege: Read/Write, User: Read Only +#define AT91C_MC_PROT_PRWURW ((unsigned int) 0x3) // (MC) Privilege: Read/Write, User: Read/Write +#define AT91C_MC_SIZE ((unsigned int) 0xF << 4) // (MC) Internal Area Size +#define AT91C_MC_SIZE_1KB ((unsigned int) 0x0 << 4) // (MC) Area size 1KByte +#define AT91C_MC_SIZE_2KB ((unsigned int) 0x1 << 4) // (MC) Area size 2KByte +#define AT91C_MC_SIZE_4KB ((unsigned int) 0x2 << 4) // (MC) Area size 4KByte +#define AT91C_MC_SIZE_8KB ((unsigned int) 0x3 << 4) // (MC) Area size 8KByte +#define AT91C_MC_SIZE_16KB ((unsigned int) 0x4 << 4) // (MC) Area size 16KByte +#define AT91C_MC_SIZE_32KB ((unsigned int) 0x5 << 4) // (MC) Area size 32KByte +#define AT91C_MC_SIZE_64KB ((unsigned int) 0x6 << 4) // (MC) Area size 64KByte +#define AT91C_MC_SIZE_128KB ((unsigned int) 0x7 << 4) // (MC) Area size 128KByte +#define AT91C_MC_SIZE_256KB ((unsigned int) 0x8 << 4) // (MC) Area size 256KByte +#define AT91C_MC_SIZE_512KB ((unsigned int) 0x9 << 4) // (MC) Area size 512KByte +#define AT91C_MC_SIZE_1MB ((unsigned int) 0xA << 4) // (MC) Area size 1MByte +#define AT91C_MC_SIZE_2MB ((unsigned int) 0xB << 4) // (MC) Area size 2MByte +#define AT91C_MC_SIZE_4MB ((unsigned int) 0xC << 4) // (MC) Area size 4MByte +#define AT91C_MC_SIZE_8MB ((unsigned int) 0xD << 4) // (MC) Area size 8MByte +#define AT91C_MC_SIZE_16MB ((unsigned int) 0xE << 4) // (MC) Area size 16MByte +#define AT91C_MC_SIZE_64MB ((unsigned int) 0xF << 4) // (MC) Area size 64MByte +#define AT91C_MC_BA ((unsigned int) 0x3FFFF << 10) // (MC) Internal Area Base Address +// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- +// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- +#define AT91C_MC_PUEB ((unsigned int) 0x1 << 0) // (MC) Protection Unit enable Bit + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface +// ***************************************************************************** +typedef struct _AT91S_RTC { + AT91_REG RTC_CR; // Control Register + AT91_REG RTC_MR; // Mode Register + AT91_REG RTC_TIMR; // Time Register + AT91_REG RTC_CALR; // Calendar Register + AT91_REG RTC_TIMALR; // Time Alarm Register + AT91_REG RTC_CALALR; // Calendar Alarm Register + AT91_REG RTC_SR; // Status Register + AT91_REG RTC_SCCR; // Status Clear Command Register + AT91_REG RTC_IER; // Interrupt Enable Register + AT91_REG RTC_IDR; // Interrupt Disable Register + AT91_REG RTC_IMR; // Interrupt Mask Register + AT91_REG RTC_VER; // Valid Entry Register +} AT91S_RTC, *AT91PS_RTC; + +// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- +#define AT91C_RTC_UPDTIM ((unsigned int) 0x1 << 0) // (RTC) Update Request Time Register +#define AT91C_RTC_UPDCAL ((unsigned int) 0x1 << 1) // (RTC) Update Request Calendar Register +#define AT91C_RTC_TIMEVSEL ((unsigned int) 0x3 << 8) // (RTC) Time Event Selection +#define AT91C_RTC_TIMEVSEL_MINUTE ((unsigned int) 0x0 << 8) // (RTC) Minute change. +#define AT91C_RTC_TIMEVSEL_HOUR ((unsigned int) 0x1 << 8) // (RTC) Hour change. +#define AT91C_RTC_TIMEVSEL_DAY24 ((unsigned int) 0x2 << 8) // (RTC) Every day at midnight. +#define AT91C_RTC_TIMEVSEL_DAY12 ((unsigned int) 0x3 << 8) // (RTC) Every day at noon. +#define AT91C_RTC_CALEVSEL ((unsigned int) 0x3 << 16) // (RTC) Calendar Event Selection +#define AT91C_RTC_CALEVSEL_WEEK ((unsigned int) 0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00). +#define AT91C_RTC_CALEVSEL_MONTH ((unsigned int) 0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00). +#define AT91C_RTC_CALEVSEL_YEAR ((unsigned int) 0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00). +// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- +#define AT91C_RTC_HRMOD ((unsigned int) 0x1 << 0) // (RTC) 12-24 hour Mode +// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- +#define AT91C_RTC_SEC ((unsigned int) 0x7F << 0) // (RTC) Current Second +#define AT91C_RTC_MIN ((unsigned int) 0x7F << 8) // (RTC) Current Minute +#define AT91C_RTC_HOUR ((unsigned int) 0x1F << 16) // (RTC) Current Hour +#define AT91C_RTC_AMPM ((unsigned int) 0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator +// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- +#define AT91C_RTC_CENT ((unsigned int) 0x3F << 0) // (RTC) Current Century +#define AT91C_RTC_YEAR ((unsigned int) 0xFF << 8) // (RTC) Current Year +#define AT91C_RTC_MONTH ((unsigned int) 0x1F << 16) // (RTC) Current Month +#define AT91C_RTC_DAY ((unsigned int) 0x7 << 21) // (RTC) Current Day +#define AT91C_RTC_DATE ((unsigned int) 0x3F << 24) // (RTC) Current Date +// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- +#define AT91C_RTC_SECEN ((unsigned int) 0x1 << 7) // (RTC) Second Alarm Enable +#define AT91C_RTC_MINEN ((unsigned int) 0x1 << 15) // (RTC) Minute Alarm +#define AT91C_RTC_HOUREN ((unsigned int) 0x1 << 23) // (RTC) Current Hour +// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- +#define AT91C_RTC_MONTHEN ((unsigned int) 0x1 << 23) // (RTC) Month Alarm Enable +#define AT91C_RTC_DATEEN ((unsigned int) 0x1 << 31) // (RTC) Date Alarm Enable +// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- +#define AT91C_RTC_ACKUPD ((unsigned int) 0x1 << 0) // (RTC) Acknowledge for Update +#define AT91C_RTC_ALARM ((unsigned int) 0x1 << 1) // (RTC) Alarm Flag +#define AT91C_RTC_SECEV ((unsigned int) 0x1 << 2) // (RTC) Second Event +#define AT91C_RTC_TIMEV ((unsigned int) 0x1 << 3) // (RTC) Time Event +#define AT91C_RTC_CALEV ((unsigned int) 0x1 << 4) // (RTC) Calendar event +// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- +// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- +// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- +// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- +// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- +#define AT91C_RTC_NVTIM ((unsigned int) 0x1 << 0) // (RTC) Non valid Time +#define AT91C_RTC_NVCAL ((unsigned int) 0x1 << 1) // (RTC) Non valid Calendar +#define AT91C_RTC_NVTIMALR ((unsigned int) 0x1 << 2) // (RTC) Non valid time Alarm +#define AT91C_RTC_NVCALALR ((unsigned int) 0x1 << 3) // (RTC) Nonvalid Calendar Alarm + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR System Timer Interface +// ***************************************************************************** +typedef struct _AT91S_ST { + AT91_REG ST_CR; // Control Register + AT91_REG ST_PIMR; // Period Interval Mode Register + AT91_REG ST_WDMR; // Watchdog Mode Register + AT91_REG ST_RTMR; // Real-time Mode Register + AT91_REG ST_SR; // Status Register + AT91_REG ST_IER; // Interrupt Enable Register + AT91_REG ST_IDR; // Interrupt Disable Register + AT91_REG ST_IMR; // Interrupt Mask Register + AT91_REG ST_RTAR; // Real-time Alarm Register + AT91_REG ST_CRTR; // Current Real-time Register +} AT91S_ST, *AT91PS_ST; + +// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- +#define AT91C_ST_WDRST ((unsigned int) 0x1 << 0) // (ST) Watchdog Timer Restart +// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- +#define AT91C_ST_PIV ((unsigned int) 0xFFFF << 0) // (ST) Watchdog Timer Restart +// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- +#define AT91C_ST_WDV ((unsigned int) 0xFFFF << 0) // (ST) Watchdog Timer Restart +#define AT91C_ST_RSTEN ((unsigned int) 0x1 << 16) // (ST) Reset Enable +#define AT91C_ST_EXTEN ((unsigned int) 0x1 << 17) // (ST) External Signal Assertion Enable +// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- +#define AT91C_ST_RTPRES ((unsigned int) 0xFFFF << 0) // (ST) Real-time Timer Prescaler Value +// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- +#define AT91C_ST_PITS ((unsigned int) 0x1 << 0) // (ST) Period Interval Timer Interrupt +#define AT91C_ST_WDOVF ((unsigned int) 0x1 << 1) // (ST) Watchdog Overflow +#define AT91C_ST_RTTINC ((unsigned int) 0x1 << 2) // (ST) Real-time Timer Increment +#define AT91C_ST_ALMS ((unsigned int) 0x1 << 3) // (ST) Alarm Status +// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- +// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- +// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- +// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- +#define AT91C_ST_ALMV ((unsigned int) 0xFFFFF << 0) // (ST) Alarm Value Value +// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- +#define AT91C_ST_CRTV ((unsigned int) 0xFFFFF << 0) // (ST) Current Real-time Value + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Power Management Controler +// ***************************************************************************** +typedef struct _AT91S_PMC { + AT91_REG PMC_SCER; // System Clock Enable Register + AT91_REG PMC_SCDR; // System Clock Disable Register + AT91_REG PMC_SCSR; // System Clock Status Register + AT91_REG Reserved0[1]; // + AT91_REG PMC_PCER; // Peripheral Clock Enable Register + AT91_REG PMC_PCDR; // Peripheral Clock Disable Register + AT91_REG PMC_PCSR; // Peripheral Clock Status Register + AT91_REG Reserved1[5]; // + AT91_REG PMC_MCKR; // Master Clock Register + AT91_REG Reserved2[3]; // + AT91_REG PMC_PCKR[8]; // Programmable Clock Register + AT91_REG PMC_IER; // Interrupt Enable Register + AT91_REG PMC_IDR; // Interrupt Disable Register + AT91_REG PMC_SR; // Status Register + AT91_REG PMC_IMR; // Interrupt Mask Register +} AT91S_PMC, *AT91PS_PMC; + +// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- +#define AT91C_PMC_PCK ((unsigned int) 0x1 << 0) // (PMC) Processor Clock +#define AT91C_PMC_UDP ((unsigned int) 0x1 << 1) // (PMC) USB Device Port Clock +#define AT91C_PMC_MCKUDP ((unsigned int) 0x1 << 2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend +#define AT91C_PMC_UHP ((unsigned int) 0x1 << 4) // (PMC) USB Host Port Clock +#define AT91C_PMC_PCK0 ((unsigned int) 0x1 << 8) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK1 ((unsigned int) 0x1 << 9) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK2 ((unsigned int) 0x1 << 10) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK3 ((unsigned int) 0x1 << 11) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK4 ((unsigned int) 0x1 << 12) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK5 ((unsigned int) 0x1 << 13) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK6 ((unsigned int) 0x1 << 14) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK7 ((unsigned int) 0x1 << 15) // (PMC) Programmable Clock Output +// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- +// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- +// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- +#define AT91C_PMC_CSS ((unsigned int) 0x3 << 0) // (PMC) Programmable Clock Selection +#define AT91C_PMC_CSS_SLOW_CLK ((unsigned int) 0x0) // (PMC) Slow Clock is selected +#define AT91C_PMC_CSS_MAIN_CLK ((unsigned int) 0x1) // (PMC) Main Clock is selected +#define AT91C_PMC_CSS_PLLA_CLK ((unsigned int) 0x2) // (PMC) Clock from PLL A is selected +#define AT91C_PMC_CSS_PLLB_CLK ((unsigned int) 0x3) // (PMC) Clock from PLL B is selected +#define AT91C_PMC_PRES ((unsigned int) 0x7 << 2) // (PMC) Programmable Clock Prescaler +#define AT91C_PMC_PRES_CLK ((unsigned int) 0x0 << 2) // (PMC) Selected clock +#define AT91C_PMC_PRES_CLK_2 ((unsigned int) 0x1 << 2) // (PMC) Selected clock divided by 2 +#define AT91C_PMC_PRES_CLK_4 ((unsigned int) 0x2 << 2) // (PMC) Selected clock divided by 4 +#define AT91C_PMC_PRES_CLK_8 ((unsigned int) 0x3 << 2) // (PMC) Selected clock divided by 8 +#define AT91C_PMC_PRES_CLK_16 ((unsigned int) 0x4 << 2) // (PMC) Selected clock divided by 16 +#define AT91C_PMC_PRES_CLK_32 ((unsigned int) 0x5 << 2) // (PMC) Selected clock divided by 32 +#define AT91C_PMC_PRES_CLK_64 ((unsigned int) 0x6 << 2) // (PMC) Selected clock divided by 64 +#define AT91C_PMC_MDIV ((unsigned int) 0x3 << 8) // (PMC) Master Clock Division +#define AT91C_PMC_MDIV_1 ((unsigned int) 0x0 << 8) // (PMC) The master clock and the processor clock are the same +#define AT91C_PMC_MDIV_2 ((unsigned int) 0x1 << 8) // (PMC) The processor clock is twice as fast as the master clock +#define AT91C_PMC_MDIV_3 ((unsigned int) 0x2 << 8) // (PMC) The processor clock is three times faster than the master clock +#define AT91C_PMC_MDIV_4 ((unsigned int) 0x3 << 8) // (PMC) The processor clock is four times faster than the master clock +// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- +// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- +#define AT91C_PMC_MOSCS ((unsigned int) 0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask +#define AT91C_PMC_LOCKA ((unsigned int) 0x1 << 1) // (PMC) PLL A Status/Enable/Disable/Mask +#define AT91C_PMC_LOCKB ((unsigned int) 0x1 << 2) // (PMC) PLL B Status/Enable/Disable/Mask +#define AT91C_PMC_MCKRDY ((unsigned int) 0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK0RDY ((unsigned int) 0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK1RDY ((unsigned int) 0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK2RDY ((unsigned int) 0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK3RDY ((unsigned int) 0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK4RDY ((unsigned int) 0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK5RDY ((unsigned int) 0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK6RDY ((unsigned int) 0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK7RDY ((unsigned int) 0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask +// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- +// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- +// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Clock Generator Controler +// ***************************************************************************** +typedef struct _AT91S_CKGR { + AT91_REG CKGR_MOR; // Main Oscillator Register + AT91_REG CKGR_MCFR; // Main Clock Frequency Register + AT91_REG CKGR_PLLAR; // PLL A Register + AT91_REG CKGR_PLLBR; // PLL B Register +} AT91S_CKGR, *AT91PS_CKGR; + +// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- +#define AT91C_CKGR_MOSCEN ((unsigned int) 0x1 << 0) // (CKGR) Main Oscillator Enable +#define AT91C_CKGR_OSCTEST ((unsigned int) 0x1 << 1) // (CKGR) Oscillator Test +#define AT91C_CKGR_OSCOUNT ((unsigned int) 0xFF << 8) // (CKGR) Main Oscillator Start-up Time +// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- +#define AT91C_CKGR_MAINF ((unsigned int) 0xFFFF << 0) // (CKGR) Main Clock Frequency +#define AT91C_CKGR_MAINRDY ((unsigned int) 0x1 << 16) // (CKGR) Main Clock Ready +// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- +#define AT91C_CKGR_DIVA ((unsigned int) 0xFF << 0) // (CKGR) Divider Selected +#define AT91C_CKGR_DIVA_0 ((unsigned int) 0x0) // (CKGR) Divider output is 0 +#define AT91C_CKGR_DIVA_BYPASS ((unsigned int) 0x1) // (CKGR) Divider is bypassed +#define AT91C_CKGR_PLLACOUNT ((unsigned int) 0x3F << 8) // (CKGR) PLL A Counter +#define AT91C_CKGR_OUTA ((unsigned int) 0x3 << 14) // (CKGR) PLL A Output Frequency Range +#define AT91C_CKGR_OUTA_0 ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLLA datasheet +#define AT91C_CKGR_OUTA_1 ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLLA datasheet +#define AT91C_CKGR_OUTA_2 ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLLA datasheet +#define AT91C_CKGR_OUTA_3 ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLLA datasheet +#define AT91C_CKGR_MULA ((unsigned int) 0x7FF << 16) // (CKGR) PLL A Multiplier +#define AT91C_CKGR_SRCA ((unsigned int) 0x1 << 29) // (CKGR) PLL A Source +// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- +#define AT91C_CKGR_DIVB ((unsigned int) 0xFF << 0) // (CKGR) Divider Selected +#define AT91C_CKGR_DIVB_0 ((unsigned int) 0x0) // (CKGR) Divider output is 0 +#define AT91C_CKGR_DIVB_BYPASS ((unsigned int) 0x1) // (CKGR) Divider is bypassed +#define AT91C_CKGR_PLLBCOUNT ((unsigned int) 0x3F << 8) // (CKGR) PLL B Counter +#define AT91C_CKGR_OUTB ((unsigned int) 0x3 << 14) // (CKGR) PLL B Output Frequency Range +#define AT91C_CKGR_OUTB_0 ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLLB datasheet +#define AT91C_CKGR_OUTB_1 ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLLB datasheet +#define AT91C_CKGR_OUTB_2 ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLLB datasheet +#define AT91C_CKGR_OUTB_3 ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLLB datasheet +#define AT91C_CKGR_MULB ((unsigned int) 0x7FF << 16) // (CKGR) PLL B Multiplier +#define AT91C_CKGR_USB_96M ((unsigned int) 0x1 << 28) // (CKGR) Divider for USB Ports +#define AT91C_CKGR_USB_PLL ((unsigned int) 0x1 << 29) // (CKGR) PLL Use + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Parallel Input Output Controler +// ***************************************************************************** +typedef struct _AT91S_PIO { + AT91_REG PIO_PER; // PIO Enable Register + AT91_REG PIO_PDR; // PIO Disable Register + AT91_REG PIO_PSR; // PIO Status Register + AT91_REG Reserved0[1]; // + AT91_REG PIO_OER; // Output Enable Register + AT91_REG PIO_ODR; // Output Disable Registerr + AT91_REG PIO_OSR; // Output Status Register + AT91_REG Reserved1[1]; // + AT91_REG PIO_IFER; // Input Filter Enable Register + AT91_REG PIO_IFDR; // Input Filter Disable Register + AT91_REG PIO_IFSR; // Input Filter Status Register + AT91_REG Reserved2[1]; // + AT91_REG PIO_SODR; // Set Output Data Register + AT91_REG PIO_CODR; // Clear Output Data Register + AT91_REG PIO_ODSR; // Output Data Status Register + AT91_REG PIO_PDSR; // Pin Data Status Register + AT91_REG PIO_IER; // Interrupt Enable Register + AT91_REG PIO_IDR; // Interrupt Disable Register + AT91_REG PIO_IMR; // Interrupt Mask Register + AT91_REG PIO_ISR; // Interrupt Status Register + AT91_REG PIO_MDER; // Multi-driver Enable Register + AT91_REG PIO_MDDR; // Multi-driver Disable Register + AT91_REG PIO_MDSR; // Multi-driver Status Register + AT91_REG Reserved3[1]; // + AT91_REG PIO_PPUDR; // Pull-up Disable Register + AT91_REG PIO_PPUER; // Pull-up Enable Register + AT91_REG PIO_PPUSR; // Pad Pull-up Status Register + AT91_REG Reserved4[1]; // + AT91_REG PIO_ASR; // Select A Register + AT91_REG PIO_BSR; // Select B Register + AT91_REG PIO_ABSR; // AB Select Status Register + AT91_REG Reserved5[9]; // + AT91_REG PIO_OWER; // Output Write Enable Register + AT91_REG PIO_OWDR; // Output Write Disable Register + AT91_REG PIO_OWSR; // Output Write Status Register +} AT91S_PIO, *AT91PS_PIO; + + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Debug Unit +// ***************************************************************************** +typedef struct _AT91S_DBGU { + AT91_REG DBGU_CR; // Control Register + AT91_REG DBGU_MR; // Mode Register + AT91_REG DBGU_IER; // Interrupt Enable Register + AT91_REG DBGU_IDR; // Interrupt Disable Register + AT91_REG DBGU_IMR; // Interrupt Mask Register + AT91_REG DBGU_CSR; // Channel Status Register + AT91_REG DBGU_RHR; // Receiver Holding Register + AT91_REG DBGU_THR; // Transmitter Holding Register + AT91_REG DBGU_BRGR; // Baud Rate Generator Register + AT91_REG Reserved0[7]; // + AT91_REG DBGU_C1R; // Chip ID1 Register + AT91_REG DBGU_C2R; // Chip ID2 Register + AT91_REG DBGU_FNTR; // Force NTRST Register + AT91_REG Reserved1[45]; // + AT91_REG DBGU_RPR; // Receive Pointer Register + AT91_REG DBGU_RCR; // Receive Counter Register + AT91_REG DBGU_TPR; // Transmit Pointer Register + AT91_REG DBGU_TCR; // Transmit Counter Register + AT91_REG DBGU_RNPR; // Receive Next Pointer Register + AT91_REG DBGU_RNCR; // Receive Next Counter Register + AT91_REG DBGU_TNPR; // Transmit Next Pointer Register + AT91_REG DBGU_TNCR; // Transmit Next Counter Register + AT91_REG DBGU_PTCR; // PDC Transfer Control Register + AT91_REG DBGU_PTSR; // PDC Transfer Status Register +} AT91S_DBGU, *AT91PS_DBGU; + +// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- +#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) // (DBGU) Reset Receiver +#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) // (DBGU) Reset Transmitter +#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) // (DBGU) Receiver Enable +#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) // (DBGU) Receiver Disable +#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) // (DBGU) Transmitter Enable +#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) // (DBGU) Transmitter Disable +// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- +#define AT91C_US_PAR ((unsigned int) 0x7 << 9) // (DBGU) Parity type +#define AT91C_US_PAR_EVEN ((unsigned int) 0x0 << 9) // (DBGU) Even Parity +#define AT91C_US_PAR_ODD ((unsigned int) 0x1 << 9) // (DBGU) Odd Parity +#define AT91C_US_PAR_SPACE ((unsigned int) 0x2 << 9) // (DBGU) Parity forced to 0 (Space) +#define AT91C_US_PAR_MARK ((unsigned int) 0x3 << 9) // (DBGU) Parity forced to 1 (Mark) +#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) // (DBGU) No Parity +#define AT91C_US_PAR_MULTI_DROP ((unsigned int) 0x6 << 9) // (DBGU) Multi-drop mode +#define AT91C_US_CHMODE ((unsigned int) 0x3 << 14) // (DBGU) Channel Mode +#define AT91C_US_CHMODE_NORMAL ((unsigned int) 0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. +#define AT91C_US_CHMODE_AUTO ((unsigned int) 0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. +#define AT91C_US_CHMODE_LOCAL ((unsigned int) 0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. +#define AT91C_US_CHMODE_REMOTE ((unsigned int) 0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. +// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- +#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) // (DBGU) RXRDY Interrupt +#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) // (DBGU) TXRDY Interrupt +#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) // (DBGU) End of Receive Transfer Interrupt +#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) // (DBGU) End of Transmit Interrupt +#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) // (DBGU) Overrun Interrupt +#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) // (DBGU) Framing Error Interrupt +#define AT91C_US_PARE ((unsigned int) 0x1 << 7) // (DBGU) Parity Error Interrupt +#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) // (DBGU) TXEMPTY Interrupt +#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) // (DBGU) TXBUFE Interrupt +#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) // (DBGU) RXBUFF Interrupt +#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) // (DBGU) COMM_TX Interrupt +#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) // (DBGU) COMM_RX Interrupt +// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- +// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- +// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- +// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- +#define AT91C_US_FORCE_NTRST ((unsigned int) 0x1 << 0) // (DBGU) Force NTRST in JTAG + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Peripheral Data Controller +// ***************************************************************************** +typedef struct _AT91S_PDC { + AT91_REG PDC_RPR; // Receive Pointer Register + AT91_REG PDC_RCR; // Receive Counter Register + AT91_REG PDC_TPR; // Transmit Pointer Register + AT91_REG PDC_TCR; // Transmit Counter Register + AT91_REG PDC_RNPR; // Receive Next Pointer Register + AT91_REG PDC_RNCR; // Receive Next Counter Register + AT91_REG PDC_TNPR; // Transmit Next Pointer Register + AT91_REG PDC_TNCR; // Transmit Next Counter Register + AT91_REG PDC_PTCR; // PDC Transfer Control Register + AT91_REG PDC_PTSR; // PDC Transfer Status Register +} AT91S_PDC, *AT91PS_PDC; + +// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- +#define AT91C_PDC_RXTEN ((unsigned int) 0x1 << 0) // (PDC) Receiver Transfer Enable +#define AT91C_PDC_RXTDIS ((unsigned int) 0x1 << 1) // (PDC) Receiver Transfer Disable +#define AT91C_PDC_TXTEN ((unsigned int) 0x1 << 8) // (PDC) Transmitter Transfer Enable +#define AT91C_PDC_TXTDIS ((unsigned int) 0x1 << 9) // (PDC) Transmitter Transfer Disable +// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller +// ***************************************************************************** +typedef struct _AT91S_AIC { + AT91_REG AIC_SMR[32]; // Source Mode Register + AT91_REG AIC_SVR[32]; // Source Vector Register + AT91_REG AIC_IVR; // IRQ Vector Register + AT91_REG AIC_FVR; // FIQ Vector Register + AT91_REG AIC_ISR; // Interrupt Status Register + AT91_REG AIC_IPR; // Interrupt Pending Register + AT91_REG AIC_IMR; // Interrupt Mask Register + AT91_REG AIC_CISR; // Core Interrupt Status Register + AT91_REG Reserved0[2]; // + AT91_REG AIC_IECR; // Interrupt Enable Command Register + AT91_REG AIC_IDCR; // Interrupt Disable Command Register + AT91_REG AIC_ICCR; // Interrupt Clear Command Register + AT91_REG AIC_ISCR; // Interrupt Set Command Register + AT91_REG AIC_EOICR; // End of Interrupt Command Register + AT91_REG AIC_SPU; // Spurious Vector Register + AT91_REG AIC_DCR; // Debug Control Register (Protect) + AT91_REG Reserved1[1]; // + AT91_REG AIC_FFER; // Fast Forcing Enable Register + AT91_REG AIC_FFDR; // Fast Forcing Disable Register + AT91_REG AIC_FFSR; // Fast Forcing Status Register +} AT91S_AIC, *AT91PS_AIC; + +// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- +#define AT91C_AIC_PRIOR ((unsigned int) 0x7 << 0) // (AIC) Priority Level +#define AT91C_AIC_PRIOR_LOWEST ((unsigned int) 0x0) // (AIC) Lowest priority level +#define AT91C_AIC_PRIOR_HIGHEST ((unsigned int) 0x7) // (AIC) Highest priority level +#define AT91C_AIC_SRCTYPE ((unsigned int) 0x3 << 5) // (AIC) Interrupt Source Type +#define AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE ((unsigned int) 0x0 << 5) // (AIC) Internal Sources Code Label Level Sensitive +#define AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED ((unsigned int) 0x1 << 5) // (AIC) Internal Sources Code Label Edge triggered +#define AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL ((unsigned int) 0x2 << 5) // (AIC) External Sources Code Label High-level Sensitive +#define AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE ((unsigned int) 0x3 << 5) // (AIC) External Sources Code Label Positive Edge triggered +// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- +#define AT91C_AIC_NFIQ ((unsigned int) 0x1 << 0) // (AIC) NFIQ Status +#define AT91C_AIC_NIRQ ((unsigned int) 0x1 << 1) // (AIC) NIRQ Status +// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- +#define AT91C_AIC_DCR_PROT ((unsigned int) 0x1 << 0) // (AIC) Protection Mode +#define AT91C_AIC_DCR_GMSK ((unsigned int) 0x1 << 1) // (AIC) General Mask + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Serial Parallel Interface +// ***************************************************************************** +typedef struct _AT91S_SPI { + AT91_REG SPI_CR; // Control Register + AT91_REG SPI_MR; // Mode Register + AT91_REG SPI_RDR; // Receive Data Register + AT91_REG SPI_TDR; // Transmit Data Register + AT91_REG SPI_SR; // Status Register + AT91_REG SPI_IER; // Interrupt Enable Register + AT91_REG SPI_IDR; // Interrupt Disable Register + AT91_REG SPI_IMR; // Interrupt Mask Register + AT91_REG Reserved0[4]; // + AT91_REG SPI_CSR[4]; // Chip Select Register + AT91_REG Reserved1[48]; // + AT91_REG SPI_RPR; // Receive Pointer Register + AT91_REG SPI_RCR; // Receive Counter Register + AT91_REG SPI_TPR; // Transmit Pointer Register + AT91_REG SPI_TCR; // Transmit Counter Register + AT91_REG SPI_RNPR; // Receive Next Pointer Register + AT91_REG SPI_RNCR; // Receive Next Counter Register + AT91_REG SPI_TNPR; // Transmit Next Pointer Register + AT91_REG SPI_TNCR; // Transmit Next Counter Register + AT91_REG SPI_PTCR; // PDC Transfer Control Register + AT91_REG SPI_PTSR; // PDC Transfer Status Register +} AT91S_SPI, *AT91PS_SPI; + +// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- +#define AT91C_SPI_SPIEN ((unsigned int) 0x1 << 0) // (SPI) SPI Enable +#define AT91C_SPI_SPIDIS ((unsigned int) 0x1 << 1) // (SPI) SPI Disable +#define AT91C_SPI_SWRST ((unsigned int) 0x1 << 7) // (SPI) SPI Software reset +// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- +#define AT91C_SPI_MSTR ((unsigned int) 0x1 << 0) // (SPI) Master/Slave Mode +#define AT91C_SPI_PS ((unsigned int) 0x1 << 1) // (SPI) Peripheral Select +#define AT91C_SPI_PS_FIXED ((unsigned int) 0x0 << 1) // (SPI) Fixed Peripheral Select +#define AT91C_SPI_PS_VARIABLE ((unsigned int) 0x1 << 1) // (SPI) Variable Peripheral Select +#define AT91C_SPI_PCSDEC ((unsigned int) 0x1 << 2) // (SPI) Chip Select Decode +#define AT91C_SPI_DIV32 ((unsigned int) 0x1 << 3) // (SPI) Clock Selection +#define AT91C_SPI_MODFDIS ((unsigned int) 0x1 << 4) // (SPI) Mode Fault Detection +#define AT91C_SPI_LLB ((unsigned int) 0x1 << 7) // (SPI) Clock Selection +#define AT91C_SPI_PCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select +#define AT91C_SPI_DLYBCS ((unsigned int) 0xFF << 24) // (SPI) Delay Between Chip Selects +// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- +#define AT91C_SPI_RD ((unsigned int) 0xFFFF << 0) // (SPI) Receive Data +#define AT91C_SPI_RPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status +// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- +#define AT91C_SPI_TD ((unsigned int) 0xFFFF << 0) // (SPI) Transmit Data +#define AT91C_SPI_TPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status +// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- +#define AT91C_SPI_RDRF ((unsigned int) 0x1 << 0) // (SPI) Receive Data Register Full +#define AT91C_SPI_TDRE ((unsigned int) 0x1 << 1) // (SPI) Transmit Data Register Empty +#define AT91C_SPI_MODF ((unsigned int) 0x1 << 2) // (SPI) Mode Fault Error +#define AT91C_SPI_OVRES ((unsigned int) 0x1 << 3) // (SPI) Overrun Error Status +#define AT91C_SPI_SPENDRX ((unsigned int) 0x1 << 4) // (SPI) End of Receiver Transfer +#define AT91C_SPI_SPENDTX ((unsigned int) 0x1 << 5) // (SPI) End of Receiver Transfer +#define AT91C_SPI_RXBUFF ((unsigned int) 0x1 << 6) // (SPI) RXBUFF Interrupt +#define AT91C_SPI_TXBUFE ((unsigned int) 0x1 << 7) // (SPI) TXBUFE Interrupt +#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) // (SPI) Enable Status +// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- +// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- +// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- +// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- +#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) // (SPI) Clock Polarity +#define AT91C_SPI_NCPHA ((unsigned int) 0x1 << 1) // (SPI) Clock Phase +#define AT91C_SPI_BITS ((unsigned int) 0xF << 4) // (SPI) Bits Per Transfer +#define AT91C_SPI_BITS_8 ((unsigned int) 0x0 << 4) // (SPI) 8 Bits Per transfer +#define AT91C_SPI_BITS_9 ((unsigned int) 0x1 << 4) // (SPI) 9 Bits Per transfer +#define AT91C_SPI_BITS_10 ((unsigned int) 0x2 << 4) // (SPI) 10 Bits Per transfer +#define AT91C_SPI_BITS_11 ((unsigned int) 0x3 << 4) // (SPI) 11 Bits Per transfer +#define AT91C_SPI_BITS_12 ((unsigned int) 0x4 << 4) // (SPI) 12 Bits Per transfer +#define AT91C_SPI_BITS_13 ((unsigned int) 0x5 << 4) // (SPI) 13 Bits Per transfer +#define AT91C_SPI_BITS_14 ((unsigned int) 0x6 << 4) // (SPI) 14 Bits Per transfer +#define AT91C_SPI_BITS_15 ((unsigned int) 0x7 << 4) // (SPI) 15 Bits Per transfer +#define AT91C_SPI_BITS_16 ((unsigned int) 0x8 << 4) // (SPI) 16 Bits Per transfer +#define AT91C_SPI_SCBR ((unsigned int) 0xFF << 8) // (SPI) Serial Clock Baud Rate +#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) // (SPI) Serial Clock Baud Rate +#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) // (SPI) Delay Between Consecutive Transfers + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface +// ***************************************************************************** +typedef struct _AT91S_SSC { + AT91_REG SSC_CR; // Control Register + AT91_REG SSC_CMR; // Clock Mode Register + AT91_REG Reserved0[2]; // + AT91_REG SSC_RCMR; // Receive Clock ModeRegister + AT91_REG SSC_RFMR; // Receive Frame Mode Register + AT91_REG SSC_TCMR; // Transmit Clock Mode Register + AT91_REG SSC_TFMR; // Transmit Frame Mode Register + AT91_REG SSC_RHR; // Receive Holding Register + AT91_REG SSC_THR; // Transmit Holding Register + AT91_REG Reserved1[2]; // + AT91_REG SSC_RSHR; // Receive Sync Holding Register + AT91_REG SSC_TSHR; // Transmit Sync Holding Register + AT91_REG SSC_RC0R; // Receive Compare 0 Register + AT91_REG SSC_RC1R; // Receive Compare 1 Register + AT91_REG SSC_SR; // Status Register + AT91_REG SSC_IER; // Interrupt Enable Register + AT91_REG SSC_IDR; // Interrupt Disable Register + AT91_REG SSC_IMR; // Interrupt Mask Register + AT91_REG Reserved2[44]; // + AT91_REG SSC_RPR; // Receive Pointer Register + AT91_REG SSC_RCR; // Receive Counter Register + AT91_REG SSC_TPR; // Transmit Pointer Register + AT91_REG SSC_TCR; // Transmit Counter Register + AT91_REG SSC_RNPR; // Receive Next Pointer Register + AT91_REG SSC_RNCR; // Receive Next Counter Register + AT91_REG SSC_TNPR; // Transmit Next Pointer Register + AT91_REG SSC_TNCR; // Transmit Next Counter Register + AT91_REG SSC_PTCR; // PDC Transfer Control Register + AT91_REG SSC_PTSR; // PDC Transfer Status Register +} AT91S_SSC, *AT91PS_SSC; + +// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- +#define AT91C_SSC_RXEN ((unsigned int) 0x1 << 0) // (SSC) Receive Enable +#define AT91C_SSC_RXDIS ((unsigned int) 0x1 << 1) // (SSC) Receive Disable +#define AT91C_SSC_TXEN ((unsigned int) 0x1 << 8) // (SSC) Transmit Enable +#define AT91C_SSC_TXDIS ((unsigned int) 0x1 << 9) // (SSC) Transmit Disable +#define AT91C_SSC_SWRST ((unsigned int) 0x1 << 15) // (SSC) Software Reset +// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- +#define AT91C_SSC_CKS ((unsigned int) 0x3 << 0) // (SSC) Receive/Transmit Clock Selection +#define AT91C_SSC_CKS_DIV ((unsigned int) 0x0) // (SSC) Divided Clock +#define AT91C_SSC_CKS_TK ((unsigned int) 0x1) // (SSC) TK Clock signal +#define AT91C_SSC_CKS_RK ((unsigned int) 0x2) // (SSC) RK pin +#define AT91C_SSC_CKO ((unsigned int) 0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection +#define AT91C_SSC_CKO_NONE ((unsigned int) 0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only +#define AT91C_SSC_CKO_CONTINOUS ((unsigned int) 0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output +#define AT91C_SSC_CKO_DATA_TX ((unsigned int) 0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output +#define AT91C_SSC_CKI ((unsigned int) 0x1 << 5) // (SSC) Receive/Transmit Clock Inversion +#define AT91C_SSC_CKG ((unsigned int) 0x3 << 6) // (SSC) Receive/Transmit Clock Gating Selection +#define AT91C_SSC_CKG_NONE ((unsigned int) 0x0 << 6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock +#define AT91C_SSC_CKG_LOW ((unsigned int) 0x1 << 6) // (SSC) Receive/Transmit Clock enabled only if RF Low +#define AT91C_SSC_CKG_HIGH ((unsigned int) 0x2 << 6) // (SSC) Receive/Transmit Clock enabled only if RF High +#define AT91C_SSC_START ((unsigned int) 0xF << 8) // (SSC) Receive/Transmit Start Selection +#define AT91C_SSC_START_CONTINOUS ((unsigned int) 0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. +#define AT91C_SSC_START_TX ((unsigned int) 0x1 << 8) // (SSC) Transmit/Receive start +#define AT91C_SSC_START_LOW_RF ((unsigned int) 0x2 << 8) // (SSC) Detection of a low level on RF input +#define AT91C_SSC_START_HIGH_RF ((unsigned int) 0x3 << 8) // (SSC) Detection of a high level on RF input +#define AT91C_SSC_START_FALL_RF ((unsigned int) 0x4 << 8) // (SSC) Detection of a falling edge on RF input +#define AT91C_SSC_START_RISE_RF ((unsigned int) 0x5 << 8) // (SSC) Detection of a rising edge on RF input +#define AT91C_SSC_START_LEVEL_RF ((unsigned int) 0x6 << 8) // (SSC) Detection of any level change on RF input +#define AT91C_SSC_START_EDGE_RF ((unsigned int) 0x7 << 8) // (SSC) Detection of any edge on RF input +#define AT91C_SSC_START_0 ((unsigned int) 0x8 << 8) // (SSC) Compare 0 +#define AT91C_SSC_STOP ((unsigned int) 0x1 << 12) // (SSC) Receive Stop Selection +#define AT91C_SSC_STTOUT ((unsigned int) 0x1 << 15) // (SSC) Receive/Transmit Start Output Selection +#define AT91C_SSC_STTDLY ((unsigned int) 0xFF << 16) // (SSC) Receive/Transmit Start Delay +#define AT91C_SSC_PERIOD ((unsigned int) 0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection +// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- +#define AT91C_SSC_DATLEN ((unsigned int) 0x1F << 0) // (SSC) Data Length +#define AT91C_SSC_LOOP ((unsigned int) 0x1 << 5) // (SSC) Loop Mode +#define AT91C_SSC_MSBF ((unsigned int) 0x1 << 7) // (SSC) Most Significant Bit First +#define AT91C_SSC_DATNB ((unsigned int) 0xF << 8) // (SSC) Data Number per Frame +#define AT91C_SSC_FSLEN ((unsigned int) 0xF << 16) // (SSC) Receive/Transmit Frame Sync length +#define AT91C_SSC_FSOS ((unsigned int) 0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection +#define AT91C_SSC_FSOS_NONE ((unsigned int) 0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only +#define AT91C_SSC_FSOS_NEGATIVE ((unsigned int) 0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse +#define AT91C_SSC_FSOS_POSITIVE ((unsigned int) 0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse +#define AT91C_SSC_FSOS_LOW ((unsigned int) 0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer +#define AT91C_SSC_FSOS_HIGH ((unsigned int) 0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer +#define AT91C_SSC_FSOS_TOGGLE ((unsigned int) 0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer +#define AT91C_SSC_FSEDGE ((unsigned int) 0x1 << 24) // (SSC) Frame Sync Edge Detection +// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- +// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- +#define AT91C_SSC_DATDEF ((unsigned int) 0x1 << 5) // (SSC) Data Default Value +#define AT91C_SSC_FSDEN ((unsigned int) 0x1 << 23) // (SSC) Frame Sync Data Enable +// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- +#define AT91C_SSC_TXRDY ((unsigned int) 0x1 << 0) // (SSC) Transmit Ready +#define AT91C_SSC_TXEMPTY ((unsigned int) 0x1 << 1) // (SSC) Transmit Empty +#define AT91C_SSC_ENDTX ((unsigned int) 0x1 << 2) // (SSC) End Of Transmission +#define AT91C_SSC_TXBUFE ((unsigned int) 0x1 << 3) // (SSC) Transmit Buffer Empty +#define AT91C_SSC_RXRDY ((unsigned int) 0x1 << 4) // (SSC) Receive Ready +#define AT91C_SSC_OVRUN ((unsigned int) 0x1 << 5) // (SSC) Receive Overrun +#define AT91C_SSC_ENDRX ((unsigned int) 0x1 << 6) // (SSC) End of Reception +#define AT91C_SSC_RXBUFF ((unsigned int) 0x1 << 7) // (SSC) Receive Buffer Full +#define AT91C_SSC_CP0 ((unsigned int) 0x1 << 8) // (SSC) Compare 0 +#define AT91C_SSC_CP1 ((unsigned int) 0x1 << 9) // (SSC) Compare 1 +#define AT91C_SSC_TXSYN ((unsigned int) 0x1 << 10) // (SSC) Transmit Sync +#define AT91C_SSC_RXSYN ((unsigned int) 0x1 << 11) // (SSC) Receive Sync +#define AT91C_SSC_TXENA ((unsigned int) 0x1 << 16) // (SSC) Transmit Enable +#define AT91C_SSC_RXENA ((unsigned int) 0x1 << 17) // (SSC) Receive Enable +// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- +// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- +// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Usart +// ***************************************************************************** +typedef struct _AT91S_USART { + AT91_REG US_CR; // Control Register + AT91_REG US_MR; // Mode Register + AT91_REG US_IER; // Interrupt Enable Register + AT91_REG US_IDR; // Interrupt Disable Register + AT91_REG US_IMR; // Interrupt Mask Register + AT91_REG US_CSR; // Channel Status Register + AT91_REG US_RHR; // Receiver Holding Register + AT91_REG US_THR; // Transmitter Holding Register + AT91_REG US_BRGR; // Baud Rate Generator Register + AT91_REG US_RTOR; // Receiver Time-out Register + AT91_REG US_TTGR; // Transmitter Time-guard Register + AT91_REG Reserved0[5]; // + AT91_REG US_FIDI; // FI_DI_Ratio Register + AT91_REG US_NER; // Nb Errors Register + AT91_REG US_XXR; // XON_XOFF Register + AT91_REG US_IF; // IRDA_FILTER Register + AT91_REG Reserved1[44]; // + AT91_REG US_RPR; // Receive Pointer Register + AT91_REG US_RCR; // Receive Counter Register + AT91_REG US_TPR; // Transmit Pointer Register + AT91_REG US_TCR; // Transmit Counter Register + AT91_REG US_RNPR; // Receive Next Pointer Register + AT91_REG US_RNCR; // Receive Next Counter Register + AT91_REG US_TNPR; // Transmit Next Pointer Register + AT91_REG US_TNCR; // Transmit Next Counter Register + AT91_REG US_PTCR; // PDC Transfer Control Register + AT91_REG US_PTSR; // PDC Transfer Status Register +} AT91S_USART, *AT91PS_USART; + +// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- +#define AT91C_US_RSTSTA ((unsigned int) 0x1 << 8) // (USART) Reset Status Bits +#define AT91C_US_STTBRK ((unsigned int) 0x1 << 9) // (USART) Start Break +#define AT91C_US_STPBRK ((unsigned int) 0x1 << 10) // (USART) Stop Break +#define AT91C_US_STTTO ((unsigned int) 0x1 << 11) // (USART) Start Time-out +#define AT91C_US_SENDA ((unsigned int) 0x1 << 12) // (USART) Send Address +#define AT91C_US_RSTIT ((unsigned int) 0x1 << 13) // (USART) Reset Iterations +#define AT91C_US_RSTNACK ((unsigned int) 0x1 << 14) // (USART) Reset Non Acknowledge +#define AT91C_US_RETTO ((unsigned int) 0x1 << 15) // (USART) Rearm Time-out +#define AT91C_US_DTREN ((unsigned int) 0x1 << 16) // (USART) Data Terminal ready Enable +#define AT91C_US_DTRDIS ((unsigned int) 0x1 << 17) // (USART) Data Terminal ready Disable +#define AT91C_US_RTSEN ((unsigned int) 0x1 << 18) // (USART) Request to Send enable +#define AT91C_US_RTSDIS ((unsigned int) 0x1 << 19) // (USART) Request to Send Disable +// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- +#define AT91C_US_USMODE ((unsigned int) 0xF << 0) // (USART) Usart mode +#define AT91C_US_USMODE_NORMAL ((unsigned int) 0x0) // (USART) Normal +#define AT91C_US_USMODE_RS485 ((unsigned int) 0x1) // (USART) RS485 +#define AT91C_US_USMODE_HWHSH ((unsigned int) 0x2) // (USART) Hardware Handshaking +#define AT91C_US_USMODE_MODEM ((unsigned int) 0x3) // (USART) Modem +#define AT91C_US_USMODE_ISO7816_0 ((unsigned int) 0x4) // (USART) ISO7816 protocol: T = 0 +#define AT91C_US_USMODE_ISO7816_1 ((unsigned int) 0x6) // (USART) ISO7816 protocol: T = 1 +#define AT91C_US_USMODE_IRDA ((unsigned int) 0x8) // (USART) IrDA +#define AT91C_US_USMODE_SWHSH ((unsigned int) 0xC) // (USART) Software Handshaking +#define AT91C_US_CLKS ((unsigned int) 0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock +#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) // (USART) Clock +#define AT91C_US_CLKS_FDIV1 ((unsigned int) 0x1 << 4) // (USART) fdiv1 +#define AT91C_US_CLKS_SLOW ((unsigned int) 0x2 << 4) // (USART) slow_clock (ARM) +#define AT91C_US_CLKS_EXT ((unsigned int) 0x3 << 4) // (USART) External (SCK) +#define AT91C_US_CHRL ((unsigned int) 0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock +#define AT91C_US_CHRL_5_BITS ((unsigned int) 0x0 << 6) // (USART) Character Length: 5 bits +#define AT91C_US_CHRL_6_BITS ((unsigned int) 0x1 << 6) // (USART) Character Length: 6 bits +#define AT91C_US_CHRL_7_BITS ((unsigned int) 0x2 << 6) // (USART) Character Length: 7 bits +#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) // (USART) Character Length: 8 bits +#define AT91C_US_SYNC ((unsigned int) 0x1 << 8) // (USART) Synchronous Mode Select +#define AT91C_US_NBSTOP ((unsigned int) 0x3 << 12) // (USART) Number of Stop bits +#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) // (USART) 1 stop bit +#define AT91C_US_NBSTOP_15_BIT ((unsigned int) 0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits +#define AT91C_US_NBSTOP_2_BIT ((unsigned int) 0x2 << 12) // (USART) 2 stop bits +#define AT91C_US_MSBF ((unsigned int) 0x1 << 16) // (USART) Bit Order +#define AT91C_US_MODE9 ((unsigned int) 0x1 << 17) // (USART) 9-bit Character length +#define AT91C_US_CKLO ((unsigned int) 0x1 << 18) // (USART) Clock Output Select +#define AT91C_US_OVER ((unsigned int) 0x1 << 19) // (USART) Over Sampling Mode +#define AT91C_US_INACK ((unsigned int) 0x1 << 20) // (USART) Inhibit Non Acknowledge +#define AT91C_US_DSNACK ((unsigned int) 0x1 << 21) // (USART) Disable Successive NACK +#define AT91C_US_MAX_ITER ((unsigned int) 0x1 << 24) // (USART) Number of Repetitions +#define AT91C_US_FILTER ((unsigned int) 0x1 << 28) // (USART) Receive Line Filter +// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- +#define AT91C_US_RXBRK ((unsigned int) 0x1 << 2) // (USART) Break Received/End of Break +#define AT91C_US_TIMEOUT ((unsigned int) 0x1 << 8) // (USART) Receiver Time-out +#define AT91C_US_ITERATION ((unsigned int) 0x1 << 10) // (USART) Max number of Repetitions Reached +#define AT91C_US_NACK ((unsigned int) 0x1 << 13) // (USART) Non Acknowledge +#define AT91C_US_RIIC ((unsigned int) 0x1 << 16) // (USART) Ring INdicator Input Change Flag +#define AT91C_US_DSRIC ((unsigned int) 0x1 << 17) // (USART) Data Set Ready Input Change Flag +#define AT91C_US_DCDIC ((unsigned int) 0x1 << 18) // (USART) Data Carrier Flag +#define AT91C_US_CTSIC ((unsigned int) 0x1 << 19) // (USART) Clear To Send Input Change Flag +// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- +// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- +// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- +#define AT91C_US_RI ((unsigned int) 0x1 << 20) // (USART) Image of RI Input +#define AT91C_US_DSR ((unsigned int) 0x1 << 21) // (USART) Image of DSR Input +#define AT91C_US_DCD ((unsigned int) 0x1 << 22) // (USART) Image of DCD Input +#define AT91C_US_CTS ((unsigned int) 0x1 << 23) // (USART) Image of CTS Input + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Two-wire Interface +// ***************************************************************************** +typedef struct _AT91S_TWI { + AT91_REG TWI_CR; // Control Register + AT91_REG TWI_MMR; // Master Mode Register + AT91_REG TWI_SMR; // Slave Mode Register + AT91_REG TWI_IADR; // Internal Address Register + AT91_REG TWI_CWGR; // Clock Waveform Generator Register + AT91_REG Reserved0[3]; // + AT91_REG TWI_SR; // Status Register + AT91_REG TWI_IER; // Interrupt Enable Register + AT91_REG TWI_IDR; // Interrupt Disable Register + AT91_REG TWI_IMR; // Interrupt Mask Register + AT91_REG TWI_RHR; // Receive Holding Register + AT91_REG TWI_THR; // Transmit Holding Register +} AT91S_TWI, *AT91PS_TWI; + +// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- +#define AT91C_TWI_START ((unsigned int) 0x1 << 0) // (TWI) Send a START Condition +#define AT91C_TWI_STOP ((unsigned int) 0x1 << 1) // (TWI) Send a STOP Condition +#define AT91C_TWI_MSEN ((unsigned int) 0x1 << 2) // (TWI) TWI Master Transfer Enabled +#define AT91C_TWI_MSDIS ((unsigned int) 0x1 << 3) // (TWI) TWI Master Transfer Disabled +#define AT91C_TWI_SVEN ((unsigned int) 0x1 << 4) // (TWI) TWI Slave Transfer Enabled +#define AT91C_TWI_SVDIS ((unsigned int) 0x1 << 5) // (TWI) TWI Slave Transfer Disabled +#define AT91C_TWI_SWRST ((unsigned int) 0x1 << 7) // (TWI) Software Reset +// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- +#define AT91C_TWI_IADRSZ ((unsigned int) 0x3 << 8) // (TWI) Internal Device Address Size +#define AT91C_TWI_IADRSZ_NO ((unsigned int) 0x0 << 8) // (TWI) No internal device address +#define AT91C_TWI_IADRSZ_1_BYTE ((unsigned int) 0x1 << 8) // (TWI) One-byte internal device address +#define AT91C_TWI_IADRSZ_2_BYTE ((unsigned int) 0x2 << 8) // (TWI) Two-byte internal device address +#define AT91C_TWI_IADRSZ_3_BYTE ((unsigned int) 0x3 << 8) // (TWI) Three-byte internal device address +#define AT91C_TWI_MREAD ((unsigned int) 0x1 << 12) // (TWI) Master Read Direction +#define AT91C_TWI_DADR ((unsigned int) 0x7F << 16) // (TWI) Device Address +// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- +#define AT91C_TWI_SADR ((unsigned int) 0x7F << 16) // (TWI) Slave Device Address +// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- +#define AT91C_TWI_CLDIV ((unsigned int) 0xFF << 0) // (TWI) Clock Low Divider +#define AT91C_TWI_CHDIV ((unsigned int) 0xFF << 8) // (TWI) Clock High Divider +#define AT91C_TWI_CKDIV ((unsigned int) 0x7 << 16) // (TWI) Clock Divider +// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- +#define AT91C_TWI_TXCOMP ((unsigned int) 0x1 << 0) // (TWI) Transmission Completed +#define AT91C_TWI_RXRDY ((unsigned int) 0x1 << 1) // (TWI) Receive holding register ReaDY +#define AT91C_TWI_TXRDY ((unsigned int) 0x1 << 2) // (TWI) Transmit holding register ReaDY +#define AT91C_TWI_SVREAD ((unsigned int) 0x1 << 3) // (TWI) Slave Read +#define AT91C_TWI_SVACC ((unsigned int) 0x1 << 4) // (TWI) Slave Access +#define AT91C_TWI_GCACC ((unsigned int) 0x1 << 5) // (TWI) General Call Access +#define AT91C_TWI_OVRE ((unsigned int) 0x1 << 6) // (TWI) Overrun Error +#define AT91C_TWI_UNRE ((unsigned int) 0x1 << 7) // (TWI) Underrun Error +#define AT91C_TWI_NACK ((unsigned int) 0x1 << 8) // (TWI) Not Acknowledged +#define AT91C_TWI_ARBLST ((unsigned int) 0x1 << 9) // (TWI) Arbitration Lost +// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- +// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- +// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Multimedia Card Interface +// ***************************************************************************** +typedef struct _AT91S_MCI { + AT91_REG MCI_CR; // MCI Control Register + AT91_REG MCI_MR; // MCI Mode Register + AT91_REG MCI_DTOR; // MCI Data Timeout Register + AT91_REG MCI_SDCR; // MCI SD Card Register + AT91_REG MCI_ARGR; // MCI Argument Register + AT91_REG MCI_CMDR; // MCI Command Register + AT91_REG Reserved0[2]; // + AT91_REG MCI_RSPR[4]; // MCI Response Register + AT91_REG MCI_RDR; // MCI Receive Data Register + AT91_REG MCI_TDR; // MCI Transmit Data Register + AT91_REG Reserved1[2]; // + AT91_REG MCI_SR; // MCI Status Register + AT91_REG MCI_IER; // MCI Interrupt Enable Register + AT91_REG MCI_IDR; // MCI Interrupt Disable Register + AT91_REG MCI_IMR; // MCI Interrupt Mask Register + AT91_REG Reserved2[44]; // + AT91_REG MCI_RPR; // Receive Pointer Register + AT91_REG MCI_RCR; // Receive Counter Register + AT91_REG MCI_TPR; // Transmit Pointer Register + AT91_REG MCI_TCR; // Transmit Counter Register + AT91_REG MCI_RNPR; // Receive Next Pointer Register + AT91_REG MCI_RNCR; // Receive Next Counter Register + AT91_REG MCI_TNPR; // Transmit Next Pointer Register + AT91_REG MCI_TNCR; // Transmit Next Counter Register + AT91_REG MCI_PTCR; // PDC Transfer Control Register + AT91_REG MCI_PTSR; // PDC Transfer Status Register +} AT91S_MCI, *AT91PS_MCI; + +// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- +#define AT91C_MCI_MCIEN ((unsigned int) 0x1 << 0) // (MCI) Multimedia Interface Enable +#define AT91C_MCI_MCIDIS ((unsigned int) 0x1 << 1) // (MCI) Multimedia Interface Disable +#define AT91C_MCI_PWSEN ((unsigned int) 0x1 << 2) // (MCI) Power Save Mode Enable +#define AT91C_MCI_PWSDIS ((unsigned int) 0x1 << 3) // (MCI) Power Save Mode Disable +// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- +#define AT91C_MCI_CLKDIV ((unsigned int) 0x1 << 0) // (MCI) Clock Divider +#define AT91C_MCI_PWSDIV ((unsigned int) 0x1 << 8) // (MCI) Power Saving Divider +#define AT91C_MCI_PDCPADV ((unsigned int) 0x1 << 14) // (MCI) PDC Padding Value +#define AT91C_MCI_PDCMODE ((unsigned int) 0x1 << 15) // (MCI) PDC Oriented Mode +#define AT91C_MCI_BLKLEN ((unsigned int) 0x1 << 18) // (MCI) Data Block Length +// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- +#define AT91C_MCI_DTOCYC ((unsigned int) 0x1 << 0) // (MCI) Data Timeout Cycle Number +#define AT91C_MCI_DTOMUL ((unsigned int) 0x7 << 4) // (MCI) Data Timeout Multiplier +#define AT91C_MCI_DTOMUL_1 ((unsigned int) 0x0 << 4) // (MCI) DTOCYC x 1 +#define AT91C_MCI_DTOMUL_16 ((unsigned int) 0x1 << 4) // (MCI) DTOCYC x 16 +#define AT91C_MCI_DTOMUL_128 ((unsigned int) 0x2 << 4) // (MCI) DTOCYC x 128 +#define AT91C_MCI_DTOMUL_256 ((unsigned int) 0x3 << 4) // (MCI) DTOCYC x 256 +#define AT91C_MCI_DTOMUL_1024 ((unsigned int) 0x4 << 4) // (MCI) DTOCYC x 1024 +#define AT91C_MCI_DTOMUL_4096 ((unsigned int) 0x5 << 4) // (MCI) DTOCYC x 4096 +#define AT91C_MCI_DTOMUL_65536 ((unsigned int) 0x6 << 4) // (MCI) DTOCYC x 65536 +#define AT91C_MCI_DTOMUL_1048576 ((unsigned int) 0x7 << 4) // (MCI) DTOCYC x 1048576 +// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- +#define AT91C_MCI_SCDSEL ((unsigned int) 0x1 << 0) // (MCI) SD Card Selector +#define AT91C_MCI_SCDBUS ((unsigned int) 0x1 << 7) // (MCI) SD Card Bus Width +// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- +#define AT91C_MCI_CMDNB ((unsigned int) 0x1F << 0) // (MCI) Command Number +#define AT91C_MCI_RSPTYP ((unsigned int) 0x3 << 6) // (MCI) Response Type +#define AT91C_MCI_RSPTYP_NO ((unsigned int) 0x0 << 6) // (MCI) No response +#define AT91C_MCI_RSPTYP_48 ((unsigned int) 0x1 << 6) // (MCI) 48-bit response +#define AT91C_MCI_RSPTYP_136 ((unsigned int) 0x2 << 6) // (MCI) 136-bit response +#define AT91C_MCI_SPCMD ((unsigned int) 0x7 << 8) // (MCI) Special CMD +#define AT91C_MCI_SPCMD_NONE ((unsigned int) 0x0 << 8) // (MCI) Not a special CMD +#define AT91C_MCI_SPCMD_INIT ((unsigned int) 0x1 << 8) // (MCI) Initialization CMD +#define AT91C_MCI_SPCMD_SYNC ((unsigned int) 0x2 << 8) // (MCI) Synchronized CMD +#define AT91C_MCI_SPCMD_IT_CMD ((unsigned int) 0x4 << 8) // (MCI) Interrupt command +#define AT91C_MCI_SPCMD_IT_REP ((unsigned int) 0x5 << 8) // (MCI) Interrupt response +#define AT91C_MCI_OPDCMD ((unsigned int) 0x1 << 11) // (MCI) Open Drain Command +#define AT91C_MCI_MAXLAT ((unsigned int) 0x1 << 12) // (MCI) Maximum Latency for Command to respond +#define AT91C_MCI_TRCMD ((unsigned int) 0x3 << 16) // (MCI) Transfer CMD +#define AT91C_MCI_TRCMD_NO ((unsigned int) 0x0 << 16) // (MCI) No transfer +#define AT91C_MCI_TRCMD_START ((unsigned int) 0x1 << 16) // (MCI) Start transfer +#define AT91C_MCI_TRCMD_STOP ((unsigned int) 0x2 << 16) // (MCI) Stop transfer +#define AT91C_MCI_TRDIR ((unsigned int) 0x1 << 18) // (MCI) Transfer Direction +#define AT91C_MCI_TRTYP ((unsigned int) 0x3 << 19) // (MCI) Transfer Type +#define AT91C_MCI_TRTYP_BLOCK ((unsigned int) 0x0 << 19) // (MCI) Block Transfer type +#define AT91C_MCI_TRTYP_MULTIPLE ((unsigned int) 0x1 << 19) // (MCI) Multiple Block transfer type +#define AT91C_MCI_TRTYP_STREAM ((unsigned int) 0x2 << 19) // (MCI) Stream transfer type +// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- +#define AT91C_MCI_CMDRDY ((unsigned int) 0x1 << 0) // (MCI) Command Ready flag +#define AT91C_MCI_RXRDY ((unsigned int) 0x1 << 1) // (MCI) RX Ready flag +#define AT91C_MCI_TXRDY ((unsigned int) 0x1 << 2) // (MCI) TX Ready flag +#define AT91C_MCI_BLKE ((unsigned int) 0x1 << 3) // (MCI) Data Block Transfer Ended flag +#define AT91C_MCI_DTIP ((unsigned int) 0x1 << 4) // (MCI) Data Transfer in Progress flag +#define AT91C_MCI_NOTBUSY ((unsigned int) 0x1 << 5) // (MCI) Data Line Not Busy flag +#define AT91C_MCI_ENDRX ((unsigned int) 0x1 << 6) // (MCI) End of RX Buffer flag +#define AT91C_MCI_ENDTX ((unsigned int) 0x1 << 7) // (MCI) End of TX Buffer flag +#define AT91C_MCI_RXBUFF ((unsigned int) 0x1 << 14) // (MCI) RX Buffer Full flag +#define AT91C_MCI_TXBUFE ((unsigned int) 0x1 << 15) // (MCI) TX Buffer Empty flag +#define AT91C_MCI_RINDE ((unsigned int) 0x1 << 16) // (MCI) Response Index Error flag +#define AT91C_MCI_RDIRE ((unsigned int) 0x1 << 17) // (MCI) Response Direction Error flag +#define AT91C_MCI_RCRCE ((unsigned int) 0x1 << 18) // (MCI) Response CRC Error flag +#define AT91C_MCI_RENDE ((unsigned int) 0x1 << 19) // (MCI) Response End Bit Error flag +#define AT91C_MCI_RTOE ((unsigned int) 0x1 << 20) // (MCI) Response Time-out Error flag +#define AT91C_MCI_DCRCE ((unsigned int) 0x1 << 21) // (MCI) data CRC Error flag +#define AT91C_MCI_DTOE ((unsigned int) 0x1 << 22) // (MCI) Data timeout Error flag +#define AT91C_MCI_OVRE ((unsigned int) 0x1 << 30) // (MCI) Overrun flag +#define AT91C_MCI_UNRE ((unsigned int) 0x1 << 31) // (MCI) Underrun flag +// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- +// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- +// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR USB Device Interface +// ***************************************************************************** +typedef struct _AT91S_UDP { + AT91_REG UDP_NUM; // Frame Number Register + AT91_REG UDP_GLBSTATE; // Global State Register + AT91_REG UDP_FADDR; // Function Address Register + AT91_REG Reserved0[1]; // + AT91_REG UDP_IER; // Interrupt Enable Register + AT91_REG UDP_IDR; // Interrupt Disable Register + AT91_REG UDP_IMR; // Interrupt Mask Register + AT91_REG UDP_ISR; // Interrupt Status Register + AT91_REG UDP_ICR; // Interrupt Clear Register + AT91_REG Reserved1[1]; // + AT91_REG UDP_RSTEP; // Reset Endpoint Register + AT91_REG Reserved2[1]; // + AT91_REG UDP_CSR[8]; // Endpoint Control and Status Register + AT91_REG UDP_FDR[8]; // Endpoint FIFO Data Register +} AT91S_UDP, *AT91PS_UDP; + +// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- +#define AT91C_UDP_FRM_NUM ((unsigned int) 0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats +#define AT91C_UDP_FRM_ERR ((unsigned int) 0x1 << 16) // (UDP) Frame Error +#define AT91C_UDP_FRM_OK ((unsigned int) 0x1 << 17) // (UDP) Frame OK +// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- +#define AT91C_UDP_FADDEN ((unsigned int) 0x1 << 0) // (UDP) Function Address Enable +#define AT91C_UDP_CONFG ((unsigned int) 0x1 << 1) // (UDP) Configured +#define AT91C_UDP_RMWUPE ((unsigned int) 0x1 << 2) // (UDP) Remote Wake Up Enable +#define AT91C_UDP_RSMINPR ((unsigned int) 0x1 << 3) // (UDP) A Resume Has Been Sent to the Host +// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- +#define AT91C_UDP_FADD ((unsigned int) 0xFF << 0) // (UDP) Function Address Value +#define AT91C_UDP_FEN ((unsigned int) 0x1 << 8) // (UDP) Function Enable +// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- +#define AT91C_UDP_EPINT0 ((unsigned int) 0x1 << 0) // (UDP) Endpoint 0 Interrupt +#define AT91C_UDP_EPINT1 ((unsigned int) 0x1 << 1) // (UDP) Endpoint 0 Interrupt +#define AT91C_UDP_EPINT2 ((unsigned int) 0x1 << 2) // (UDP) Endpoint 2 Interrupt +#define AT91C_UDP_EPINT3 ((unsigned int) 0x1 << 3) // (UDP) Endpoint 3 Interrupt +#define AT91C_UDP_EPINT4 ((unsigned int) 0x1 << 4) // (UDP) Endpoint 4 Interrupt +#define AT91C_UDP_EPINT5 ((unsigned int) 0x1 << 5) // (UDP) Endpoint 5 Interrupt +#define AT91C_UDP_EPINT6 ((unsigned int) 0x1 << 6) // (UDP) Endpoint 6 Interrupt +#define AT91C_UDP_EPINT7 ((unsigned int) 0x1 << 7) // (UDP) Endpoint 7 Interrupt +#define AT91C_UDP_RXSUSP ((unsigned int) 0x1 << 8) // (UDP) USB Suspend Interrupt +#define AT91C_UDP_RXRSM ((unsigned int) 0x1 << 9) // (UDP) USB Resume Interrupt +#define AT91C_UDP_EXTRSM ((unsigned int) 0x1 << 10) // (UDP) USB External Resume Interrupt +#define AT91C_UDP_SOFINT ((unsigned int) 0x1 << 11) // (UDP) USB Start Of frame Interrupt +#define AT91C_UDP_WAKEUP ((unsigned int) 0x1 << 13) // (UDP) USB Resume Interrupt +// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- +// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- +// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- +#define AT91C_UDP_ENDBUSRES ((unsigned int) 0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt +// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- +// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- +#define AT91C_UDP_EP0 ((unsigned int) 0x1 << 0) // (UDP) Reset Endpoint 0 +#define AT91C_UDP_EP1 ((unsigned int) 0x1 << 1) // (UDP) Reset Endpoint 1 +#define AT91C_UDP_EP2 ((unsigned int) 0x1 << 2) // (UDP) Reset Endpoint 2 +#define AT91C_UDP_EP3 ((unsigned int) 0x1 << 3) // (UDP) Reset Endpoint 3 +#define AT91C_UDP_EP4 ((unsigned int) 0x1 << 4) // (UDP) Reset Endpoint 4 +#define AT91C_UDP_EP5 ((unsigned int) 0x1 << 5) // (UDP) Reset Endpoint 5 +#define AT91C_UDP_EP6 ((unsigned int) 0x1 << 6) // (UDP) Reset Endpoint 6 +#define AT91C_UDP_EP7 ((unsigned int) 0x1 << 7) // (UDP) Reset Endpoint 7 +// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- +#define AT91C_UDP_TXCOMP ((unsigned int) 0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR +#define AT91C_UDP_RX_DATA_BK0 ((unsigned int) 0x1 << 1) // (UDP) Receive Data Bank 0 +#define AT91C_UDP_RXSETUP ((unsigned int) 0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) +#define AT91C_UDP_ISOERROR ((unsigned int) 0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) +#define AT91C_UDP_TXPKTRDY ((unsigned int) 0x1 << 4) // (UDP) Transmit Packet Ready +#define AT91C_UDP_FORCESTALL ((unsigned int) 0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). +#define AT91C_UDP_RX_DATA_BK1 ((unsigned int) 0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). +#define AT91C_UDP_DIR ((unsigned int) 0x1 << 7) // (UDP) Transfer Direction +#define AT91C_UDP_EPTYPE ((unsigned int) 0x7 << 8) // (UDP) Endpoint type +#define AT91C_UDP_EPTYPE_CTRL ((unsigned int) 0x0 << 8) // (UDP) Control +#define AT91C_UDP_EPTYPE_ISO_OUT ((unsigned int) 0x1 << 8) // (UDP) Isochronous OUT +#define AT91C_UDP_EPTYPE_BULK_OUT ((unsigned int) 0x2 << 8) // (UDP) Bulk OUT +#define AT91C_UDP_EPTYPE_INT_OUT ((unsigned int) 0x3 << 8) // (UDP) Interrupt OUT +#define AT91C_UDP_EPTYPE_ISO_IN ((unsigned int) 0x5 << 8) // (UDP) Isochronous IN +#define AT91C_UDP_EPTYPE_BULK_IN ((unsigned int) 0x6 << 8) // (UDP) Bulk IN +#define AT91C_UDP_EPTYPE_INT_IN ((unsigned int) 0x7 << 8) // (UDP) Interrupt IN +#define AT91C_UDP_DTGLE ((unsigned int) 0x1 << 11) // (UDP) Data Toggle +#define AT91C_UDP_EPEDS ((unsigned int) 0x1 << 15) // (UDP) Endpoint Enable Disable +#define AT91C_UDP_RXBYTECNT ((unsigned int) 0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface +// ***************************************************************************** +typedef struct _AT91S_TC { + AT91_REG TC_CCR; // Channel Control Register + AT91_REG TC_CMR; // Channel Mode Register + AT91_REG Reserved0[2]; // + AT91_REG TC_CV; // Counter Value + AT91_REG TC_RA; // Register A + AT91_REG TC_RB; // Register B + AT91_REG TC_RC; // Register C + AT91_REG TC_SR; // Status Register + AT91_REG TC_IER; // Interrupt Enable Register + AT91_REG TC_IDR; // Interrupt Disable Register + AT91_REG TC_IMR; // Interrupt Mask Register +} AT91S_TC, *AT91PS_TC; + +// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- +#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) // (TC) Counter Clock Enable Command +#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) // (TC) Counter Clock Disable Command +#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) // (TC) Software Trigger Command +// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- +#define AT91C_TC_CPCSTOP ((unsigned int) 0x1 << 6) // (TC) Counter Clock Stopped with RC Compare +#define AT91C_TC_CPCDIS ((unsigned int) 0x1 << 7) // (TC) Counter Clock Disable with RC Compare +#define AT91C_TC_EEVTEDG ((unsigned int) 0x3 << 8) // (TC) External Event Edge Selection +#define AT91C_TC_EEVTEDG_NONE ((unsigned int) 0x0 << 8) // (TC) Edge: None +#define AT91C_TC_EEVTEDG_RISING ((unsigned int) 0x1 << 8) // (TC) Edge: rising edge +#define AT91C_TC_EEVTEDG_FALLING ((unsigned int) 0x2 << 8) // (TC) Edge: falling edge +#define AT91C_TC_EEVTEDG_BOTH ((unsigned int) 0x3 << 8) // (TC) Edge: each edge +#define AT91C_TC_EEVT ((unsigned int) 0x3 << 10) // (TC) External Event Selection +#define AT91C_TC_EEVT_NONE ((unsigned int) 0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input +#define AT91C_TC_EEVT_RISING ((unsigned int) 0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output +#define AT91C_TC_EEVT_FALLING ((unsigned int) 0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output +#define AT91C_TC_EEVT_BOTH ((unsigned int) 0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output +#define AT91C_TC_ENETRG ((unsigned int) 0x1 << 12) // (TC) External Event Trigger enable +#define AT91C_TC_WAVESEL ((unsigned int) 0x3 << 13) // (TC) Waveform Selection +#define AT91C_TC_WAVESEL_UP ((unsigned int) 0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UPDOWN ((unsigned int) 0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UP_AUTO ((unsigned int) 0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UPDOWN_AUTO ((unsigned int) 0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare +#define AT91C_TC_CPCTRG ((unsigned int) 0x1 << 14) // (TC) RC Compare Trigger Enable +#define AT91C_TC_WAVE ((unsigned int) 0x1 << 15) // (TC) +#define AT91C_TC_ACPA ((unsigned int) 0x3 << 16) // (TC) RA Compare Effect on TIOA +#define AT91C_TC_ACPA_NONE ((unsigned int) 0x0 << 16) // (TC) Effect: none +#define AT91C_TC_ACPA_SET ((unsigned int) 0x1 << 16) // (TC) Effect: set +#define AT91C_TC_ACPA_CLEAR ((unsigned int) 0x2 << 16) // (TC) Effect: clear +#define AT91C_TC_ACPA_TOGGLE ((unsigned int) 0x3 << 16) // (TC) Effect: toggle +#define AT91C_TC_ACPC ((unsigned int) 0x3 << 18) // (TC) RC Compare Effect on TIOA +#define AT91C_TC_ACPC_NONE ((unsigned int) 0x0 << 18) // (TC) Effect: none +#define AT91C_TC_ACPC_SET ((unsigned int) 0x1 << 18) // (TC) Effect: set +#define AT91C_TC_ACPC_CLEAR ((unsigned int) 0x2 << 18) // (TC) Effect: clear +#define AT91C_TC_ACPC_TOGGLE ((unsigned int) 0x3 << 18) // (TC) Effect: toggle +#define AT91C_TC_AEEVT ((unsigned int) 0x3 << 20) // (TC) External Event Effect on TIOA +#define AT91C_TC_AEEVT_NONE ((unsigned int) 0x0 << 20) // (TC) Effect: none +#define AT91C_TC_AEEVT_SET ((unsigned int) 0x1 << 20) // (TC) Effect: set +#define AT91C_TC_AEEVT_CLEAR ((unsigned int) 0x2 << 20) // (TC) Effect: clear +#define AT91C_TC_AEEVT_TOGGLE ((unsigned int) 0x3 << 20) // (TC) Effect: toggle +#define AT91C_TC_ASWTRG ((unsigned int) 0x3 << 22) // (TC) Software Trigger Effect on TIOA +#define AT91C_TC_ASWTRG_NONE ((unsigned int) 0x0 << 22) // (TC) Effect: none +#define AT91C_TC_ASWTRG_SET ((unsigned int) 0x1 << 22) // (TC) Effect: set +#define AT91C_TC_ASWTRG_CLEAR ((unsigned int) 0x2 << 22) // (TC) Effect: clear +#define AT91C_TC_ASWTRG_TOGGLE ((unsigned int) 0x3 << 22) // (TC) Effect: toggle +#define AT91C_TC_BCPB ((unsigned int) 0x3 << 24) // (TC) RB Compare Effect on TIOB +#define AT91C_TC_BCPB_NONE ((unsigned int) 0x0 << 24) // (TC) Effect: none +#define AT91C_TC_BCPB_SET ((unsigned int) 0x1 << 24) // (TC) Effect: set +#define AT91C_TC_BCPB_CLEAR ((unsigned int) 0x2 << 24) // (TC) Effect: clear +#define AT91C_TC_BCPB_TOGGLE ((unsigned int) 0x3 << 24) // (TC) Effect: toggle +#define AT91C_TC_BCPC ((unsigned int) 0x3 << 26) // (TC) RC Compare Effect on TIOB +#define AT91C_TC_BCPC_NONE ((unsigned int) 0x0 << 26) // (TC) Effect: none +#define AT91C_TC_BCPC_SET ((unsigned int) 0x1 << 26) // (TC) Effect: set +#define AT91C_TC_BCPC_CLEAR ((unsigned int) 0x2 << 26) // (TC) Effect: clear +#define AT91C_TC_BCPC_TOGGLE ((unsigned int) 0x3 << 26) // (TC) Effect: toggle +#define AT91C_TC_BEEVT ((unsigned int) 0x3 << 28) // (TC) External Event Effect on TIOB +#define AT91C_TC_BEEVT_NONE ((unsigned int) 0x0 << 28) // (TC) Effect: none +#define AT91C_TC_BEEVT_SET ((unsigned int) 0x1 << 28) // (TC) Effect: set +#define AT91C_TC_BEEVT_CLEAR ((unsigned int) 0x2 << 28) // (TC) Effect: clear +#define AT91C_TC_BEEVT_TOGGLE ((unsigned int) 0x3 << 28) // (TC) Effect: toggle +#define AT91C_TC_BSWTRG ((unsigned int) 0x3 << 30) // (TC) Software Trigger Effect on TIOB +#define AT91C_TC_BSWTRG_NONE ((unsigned int) 0x0 << 30) // (TC) Effect: none +#define AT91C_TC_BSWTRG_SET ((unsigned int) 0x1 << 30) // (TC) Effect: set +#define AT91C_TC_BSWTRG_CLEAR ((unsigned int) 0x2 << 30) // (TC) Effect: clear +#define AT91C_TC_BSWTRG_TOGGLE ((unsigned int) 0x3 << 30) // (TC) Effect: toggle +// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- +#define AT91C_TC_COVFS ((unsigned int) 0x1 << 0) // (TC) Counter Overflow +#define AT91C_TC_LOVRS ((unsigned int) 0x1 << 1) // (TC) Load Overrun +#define AT91C_TC_CPAS ((unsigned int) 0x1 << 2) // (TC) RA Compare +#define AT91C_TC_CPBS ((unsigned int) 0x1 << 3) // (TC) RB Compare +#define AT91C_TC_CPCS ((unsigned int) 0x1 << 4) // (TC) RC Compare +#define AT91C_TC_LDRAS ((unsigned int) 0x1 << 5) // (TC) RA Loading +#define AT91C_TC_LDRBS ((unsigned int) 0x1 << 6) // (TC) RB Loading +#define AT91C_TC_ETRCS ((unsigned int) 0x1 << 7) // (TC) External Trigger +#define AT91C_TC_ETRGS ((unsigned int) 0x1 << 16) // (TC) Clock Enabling +#define AT91C_TC_MTIOA ((unsigned int) 0x1 << 17) // (TC) TIOA Mirror +#define AT91C_TC_MTIOB ((unsigned int) 0x1 << 18) // (TC) TIOA Mirror +// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- +// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- +// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Timer Counter Interface +// ***************************************************************************** +typedef struct _AT91S_TCB { + AT91S_TC TCB_TC0; // TC Channel 0 + AT91_REG Reserved0[4]; // + AT91S_TC TCB_TC1; // TC Channel 1 + AT91_REG Reserved1[4]; // + AT91S_TC TCB_TC2; // TC Channel 2 + AT91_REG Reserved2[4]; // + AT91_REG TCB_BCR; // TC Block Control Register + AT91_REG TCB_BMR; // TC Block Mode Register +} AT91S_TCB, *AT91PS_TCB; + +// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- +#define AT91C_TCB_SYNC ((unsigned int) 0x1 << 0) // (TCB) Synchro Command +// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- +#define AT91C_TCB_TC0XC0S ((unsigned int) 0x1 << 0) // (TCB) External Clock Signal 0 Selection +#define AT91C_TCB_TC0XC0S_TCLK0 ((unsigned int) 0x0) // (TCB) TCLK0 connected to XC0 +#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) // (TCB) None signal connected to XC0 +#define AT91C_TCB_TC0XC0S_TIOA1 ((unsigned int) 0x2) // (TCB) TIOA1 connected to XC0 +#define AT91C_TCB_TC0XC0S_TIOA2 ((unsigned int) 0x3) // (TCB) TIOA2 connected to XC0 +#define AT91C_TCB_TC1XC1S ((unsigned int) 0x1 << 2) // (TCB) External Clock Signal 1 Selection +#define AT91C_TCB_TC1XC1S_TCLK1 ((unsigned int) 0x0 << 2) // (TCB) TCLK1 connected to XC1 +#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) // (TCB) None signal connected to XC1 +#define AT91C_TCB_TC1XC1S_TIOA0 ((unsigned int) 0x2 << 2) // (TCB) TIOA0 connected to XC1 +#define AT91C_TCB_TC1XC1S_TIOA2 ((unsigned int) 0x3 << 2) // (TCB) TIOA2 connected to XC1 +#define AT91C_TCB_TC2XC2S ((unsigned int) 0x1 << 4) // (TCB) External Clock Signal 2 Selection +#define AT91C_TCB_TC2XC2S_TCLK2 ((unsigned int) 0x0 << 4) // (TCB) TCLK2 connected to XC2 +#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) // (TCB) None signal connected to XC2 +#define AT91C_TCB_TC2XC2S_TIOA0 ((unsigned int) 0x2 << 4) // (TCB) TIOA0 connected to XC2 +#define AT91C_TCB_TC2XC2S_TIOA2 ((unsigned int) 0x3 << 4) // (TCB) TIOA2 connected to XC2 + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR USB Host Interface +// ***************************************************************************** +typedef struct _AT91S_UHP { + AT91_REG UHP_HcRevision; // Revision + AT91_REG UHP_HcControl; // Operating modes for the Host Controller + AT91_REG UHP_HcCommandStatus; // Command & status Register + AT91_REG UHP_HcInterruptStatus; // Interrupt Status Register + AT91_REG UHP_HcInterruptEnable; // Interrupt Enable Register + AT91_REG UHP_HcInterruptDisable; // Interrupt Disable Register + AT91_REG UHP_HcHCCA; // Pointer to the Host Controller Communication Area + AT91_REG UHP_HcPeriodCurrentED; // Current Isochronous or Interrupt Endpoint Descriptor + AT91_REG UHP_HcControlHeadED; // First Endpoint Descriptor of the Control list + AT91_REG UHP_HcControlCurrentED; // Endpoint Control and Status Register + AT91_REG UHP_HcBulkHeadED; // First endpoint register of the Bulk list + AT91_REG UHP_HcBulkCurrentED; // Current endpoint of the Bulk list + AT91_REG UHP_HcBulkDoneHead; // Last completed transfer descriptor + AT91_REG UHP_HcFmInterval; // Bit time between 2 consecutive SOFs + AT91_REG UHP_HcFmRemaining; // Bit time remaining in the current Frame + AT91_REG UHP_HcFmNumber; // Frame number + AT91_REG UHP_HcPeriodicStart; // Periodic Start + AT91_REG UHP_HcLSThreshold; // LS Threshold + AT91_REG UHP_HcRhDescriptorA; // Root Hub characteristics A + AT91_REG UHP_HcRhDescriptorB; // Root Hub characteristics B + AT91_REG UHP_HcRhStatus; // Root Hub Status register + AT91_REG UHP_HcRhPortStatus[2]; // Root Hub Port Status Register +} AT91S_UHP, *AT91PS_UHP; + + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Ethernet MAC +// ***************************************************************************** +typedef struct _AT91S_EMAC { + AT91_REG EMAC_CTL; // Network Control Register + AT91_REG EMAC_CFG; // Network Configuration Register + AT91_REG EMAC_SR; // Network Status Register + AT91_REG EMAC_TAR; // Transmit Address Register + AT91_REG EMAC_TCR; // Transmit Control Register + AT91_REG EMAC_TSR; // Transmit Status Register + AT91_REG EMAC_RBQP; // Receive Buffer Queue Pointer + AT91_REG Reserved0[1]; // + AT91_REG EMAC_RSR; // Receive Status Register + AT91_REG EMAC_ISR; // Interrupt Status Register + AT91_REG EMAC_IER; // Interrupt Enable Register + AT91_REG EMAC_IDR; // Interrupt Disable Register + AT91_REG EMAC_IMR; // Interrupt Mask Register + AT91_REG EMAC_MAN; // PHY Maintenance Register + AT91_REG Reserved1[2]; // + AT91_REG EMAC_FRA; // Frames Transmitted OK Register + AT91_REG EMAC_SCOL; // Single Collision Frame Register + AT91_REG EMAC_MCOL; // Multiple Collision Frame Register + AT91_REG EMAC_OK; // Frames Received OK Register + AT91_REG EMAC_SEQE; // Frame Check Sequence Error Register + AT91_REG EMAC_ALE; // Alignment Error Register + AT91_REG EMAC_DTE; // Deferred Transmission Frame Register + AT91_REG EMAC_LCOL; // Late Collision Register + AT91_REG EMAC_ECOL; // Excessive Collision Register + AT91_REG EMAC_CSE; // Carrier Sense Error Register + AT91_REG EMAC_TUE; // Transmit Underrun Error Register + AT91_REG EMAC_CDE; // Code Error Register + AT91_REG EMAC_ELR; // Excessive Length Error Register + AT91_REG EMAC_RJB; // Receive Jabber Register + AT91_REG EMAC_USF; // Undersize Frame Register + AT91_REG EMAC_SQEE; // SQE Test Error Register + AT91_REG EMAC_DRFC; // Discarded RX Frame Register + AT91_REG Reserved2[3]; // + AT91_REG EMAC_HSH; // Hash Address High[63:32] + AT91_REG EMAC_HSL; // Hash Address Low[31:0] + AT91_REG EMAC_SA1L; // Specific Address 1 Low, First 4 bytes + AT91_REG EMAC_SA1H; // Specific Address 1 High, Last 2 bytes + AT91_REG EMAC_SA2L; // Specific Address 2 Low, First 4 bytes + AT91_REG EMAC_SA2H; // Specific Address 2 High, Last 2 bytes + AT91_REG EMAC_SA3L; // Specific Address 3 Low, First 4 bytes + AT91_REG EMAC_SA3H; // Specific Address 3 High, Last 2 bytes + AT91_REG EMAC_SA4L; // Specific Address 4 Low, First 4 bytes + AT91_REG EMAC_SA4H; // Specific Address 4 High, Last 2 bytesr +} AT91S_EMAC, *AT91PS_EMAC; + +// -------- EMAC_CTL : (EMAC Offset: 0x0) -------- +#define AT91C_EMAC_LB ((unsigned int) 0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level. +#define AT91C_EMAC_LBL ((unsigned int) 0x1 << 1) // (EMAC) Loopback local. +#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) // (EMAC) Receive enable. +#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) // (EMAC) Transmit enable. +#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) // (EMAC) Management port enable. +#define AT91C_EMAC_CSR ((unsigned int) 0x1 << 5) // (EMAC) Clear statistics registers. +#define AT91C_EMAC_ISR ((unsigned int) 0x1 << 6) // (EMAC) Increment statistics registers. +#define AT91C_EMAC_WES ((unsigned int) 0x1 << 7) // (EMAC) Write enable for statistics registers. +#define AT91C_EMAC_BP ((unsigned int) 0x1 << 8) // (EMAC) Back pressure. +// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- +#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) // (EMAC) Speed. +#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) // (EMAC) Full duplex. +#define AT91C_EMAC_BR ((unsigned int) 0x1 << 2) // (EMAC) Bit rate. +#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) // (EMAC) Copy all frames. +#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) // (EMAC) No broadcast. +#define AT91C_EMAC_MTI ((unsigned int) 0x1 << 6) // (EMAC) Multicast hash enable +#define AT91C_EMAC_UNI ((unsigned int) 0x1 << 7) // (EMAC) Unicast hash enable. +#define AT91C_EMAC_BIG ((unsigned int) 0x1 << 8) // (EMAC) Receive 1522 bytes. +#define AT91C_EMAC_EAE ((unsigned int) 0x1 << 9) // (EMAC) External address match enable. +#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) // (EMAC) +#define AT91C_EMAC_CLK_HCLK_8 ((unsigned int) 0x0 << 10) // (EMAC) HCLK divided by 8 +#define AT91C_EMAC_CLK_HCLK_16 ((unsigned int) 0x1 << 10) // (EMAC) HCLK divided by 16 +#define AT91C_EMAC_CLK_HCLK_32 ((unsigned int) 0x2 << 10) // (EMAC) HCLK divided by 32 +#define AT91C_EMAC_CLK_HCLK_64 ((unsigned int) 0x3 << 10) // (EMAC) HCLK divided by 64 +#define AT91C_EMAC_RTY ((unsigned int) 0x1 << 12) // (EMAC) +#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 13) // (EMAC) +// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- +#define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) // (EMAC) +#define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) // (EMAC) +// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- +#define AT91C_EMAC_LEN ((unsigned int) 0x7FF << 0) // (EMAC) +#define AT91C_EMAC_NCRC ((unsigned int) 0x1 << 15) // (EMAC) +// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- +#define AT91C_EMAC_OVR ((unsigned int) 0x1 << 0) // (EMAC) +#define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) // (EMAC) +#define AT91C_EMAC_RLE ((unsigned int) 0x1 << 2) // (EMAC) +#define AT91C_EMAC_TXIDLE ((unsigned int) 0x1 << 3) // (EMAC) +#define AT91C_EMAC_BNQ ((unsigned int) 0x1 << 4) // (EMAC) +#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) // (EMAC) +#define AT91C_EMAC_UND ((unsigned int) 0x1 << 6) // (EMAC) +// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- +#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) // (EMAC) +#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) // (EMAC) +// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- +#define AT91C_EMAC_DONE ((unsigned int) 0x1 << 0) // (EMAC) +#define AT91C_EMAC_RCOM ((unsigned int) 0x1 << 1) // (EMAC) +#define AT91C_EMAC_RBNA ((unsigned int) 0x1 << 2) // (EMAC) +#define AT91C_EMAC_TOVR ((unsigned int) 0x1 << 3) // (EMAC) +#define AT91C_EMAC_TUND ((unsigned int) 0x1 << 4) // (EMAC) +#define AT91C_EMAC_RTRY ((unsigned int) 0x1 << 5) // (EMAC) +#define AT91C_EMAC_TBRE ((unsigned int) 0x1 << 6) // (EMAC) +#define AT91C_EMAC_TCOM ((unsigned int) 0x1 << 7) // (EMAC) +#define AT91C_EMAC_TIDLE ((unsigned int) 0x1 << 8) // (EMAC) +#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 9) // (EMAC) +#define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) // (EMAC) +#define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) // (EMAC) +// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- +// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- +// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- +// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- +#define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) // (EMAC) +#define AT91C_EMAC_CODE ((unsigned int) 0x3 << 16) // (EMAC) +#define AT91C_EMAC_REGA ((unsigned int) 0x1F << 18) // (EMAC) +#define AT91C_EMAC_PHYA ((unsigned int) 0x1F << 23) // (EMAC) +#define AT91C_EMAC_RW ((unsigned int) 0x3 << 28) // (EMAC) +#define AT91C_EMAC_HIGH ((unsigned int) 0x1 << 30) // (EMAC) +#define AT91C_EMAC_LOW ((unsigned int) 0x1 << 31) // (EMAC) + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR External Bus Interface +// ***************************************************************************** +typedef struct _AT91S_EBI { + AT91_REG EBI_CSA; // Chip Select Assignment Register + AT91_REG EBI_CFGR; // Configuration Register +} AT91S_EBI, *AT91PS_EBI; + +// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- +#define AT91C_EBI_CS0A ((unsigned int) 0x1 << 0) // (EBI) Chip Select 0 Assignment +#define AT91C_EBI_CS0A_SMC ((unsigned int) 0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller. +#define AT91C_EBI_CS0A_BFC ((unsigned int) 0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller. +#define AT91C_EBI_CS1A ((unsigned int) 0x1 << 1) // (EBI) Chip Select 1 Assignment +#define AT91C_EBI_CS1A_SMC ((unsigned int) 0x0 << 1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller. +#define AT91C_EBI_CS1A_SDRAMC ((unsigned int) 0x1 << 1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller. +#define AT91C_EBI_CS3A ((unsigned int) 0x1 << 3) // (EBI) Chip Select 3 Assignment +#define AT91C_EBI_CS3A_SMC ((unsigned int) 0x0 << 3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. +#define AT91C_EBI_CS3A_SMC_SmartMedia ((unsigned int) 0x1 << 3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. +#define AT91C_EBI_CS4A ((unsigned int) 0x1 << 4) // (EBI) Chip Select 4 Assignment +#define AT91C_EBI_CS4A_SMC ((unsigned int) 0x0 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. +#define AT91C_EBI_CS4A_SMC_CompactFlash ((unsigned int) 0x1 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. +// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- +#define AT91C_EBI_DBPUC ((unsigned int) 0x1 << 0) // (EBI) Data Bus Pull-Up Configuration +#define AT91C_EBI_EBSEN ((unsigned int) 0x1 << 1) // (EBI) Bus Sharing Enable + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface +// ***************************************************************************** +typedef struct _AT91S_SMC2 { + AT91_REG SMC2_CSR[8]; // SMC2 Chip Select Register +} AT91S_SMC2, *AT91PS_SMC2; + +// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- +#define AT91C_SMC2_NWS ((unsigned int) 0x7F << 0) // (SMC2) Number of Wait States +#define AT91C_SMC2_WSEN ((unsigned int) 0x1 << 7) // (SMC2) Wait State Enable +#define AT91C_SMC2_TDF ((unsigned int) 0xF << 8) // (SMC2) Data Float Time +#define AT91C_SMC2_BAT ((unsigned int) 0x1 << 12) // (SMC2) Byte Access Type +#define AT91C_SMC2_DBW ((unsigned int) 0x1 << 13) // (SMC2) Data Bus Width +#define AT91C_SMC2_DBW_16 ((unsigned int) 0x1 << 13) // (SMC2) 16-bit. +#define AT91C_SMC2_DBW_8 ((unsigned int) 0x2 << 13) // (SMC2) 8-bit. +#define AT91C_SMC2_DRP ((unsigned int) 0x1 << 15) // (SMC2) Data Read Protocol +#define AT91C_SMC2_ACSS ((unsigned int) 0x3 << 16) // (SMC2) Address to Chip Select Setup +#define AT91C_SMC2_ACSS_STANDARD ((unsigned int) 0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. +#define AT91C_SMC2_ACSS_1_CYCLE ((unsigned int) 0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access. +#define AT91C_SMC2_ACSS_2_CYCLES ((unsigned int) 0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access. +#define AT91C_SMC2_ACSS_3_CYCLES ((unsigned int) 0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access. +#define AT91C_SMC2_RWSETUP ((unsigned int) 0x7 << 24) // (SMC2) Read and Write Signal Setup Time +#define AT91C_SMC2_RWHOLD ((unsigned int) 0x7 << 29) // (SMC2) Read and Write Signal Hold Time + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR SDRAM Controller Interface +// ***************************************************************************** +typedef struct _AT91S_SDRC { + AT91_REG SDRC_MR; // SDRAM Controller Mode Register + AT91_REG SDRC_TR; // SDRAM Controller Refresh Timer Register + AT91_REG SDRC_CR; // SDRAM Controller Configuration Register + AT91_REG SDRC_SRR; // SDRAM Controller Self Refresh Register + AT91_REG SDRC_LPR; // SDRAM Controller Low Power Register + AT91_REG SDRC_IER; // SDRAM Controller Interrupt Enable Register + AT91_REG SDRC_IDR; // SDRAM Controller Interrupt Disable Register + AT91_REG SDRC_IMR; // SDRAM Controller Interrupt Mask Register + AT91_REG SDRC_ISR; // SDRAM Controller Interrupt Mask Register +} AT91S_SDRC, *AT91PS_SDRC; + +// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- +#define AT91C_SDRC_MODE ((unsigned int) 0xF << 0) // (SDRC) Mode +#define AT91C_SDRC_MODE_NORMAL_CMD ((unsigned int) 0x0) // (SDRC) Normal Mode +#define AT91C_SDRC_MODE_NOP_CMD ((unsigned int) 0x1) // (SDRC) NOP Command +#define AT91C_SDRC_MODE_PRCGALL_CMD ((unsigned int) 0x2) // (SDRC) All Banks Precharge Command +#define AT91C_SDRC_MODE_LMR_CMD ((unsigned int) 0x3) // (SDRC) Load Mode Register Command +#define AT91C_SDRC_MODE_RFSH_CMD ((unsigned int) 0x4) // (SDRC) Refresh Command +#define AT91C_SDRC_DBW ((unsigned int) 0x1 << 4) // (SDRC) Data Bus Width +#define AT91C_SDRC_DBW_32_BITS ((unsigned int) 0x0 << 4) // (SDRC) 32 Bits datas bus +#define AT91C_SDRC_DBW_16_BITS ((unsigned int) 0x1 << 4) // (SDRC) 16 Bits datas bus +// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- +#define AT91C_SDRC_COUNT ((unsigned int) 0xFFF << 0) // (SDRC) Refresh Counter +// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- +#define AT91C_SDRC_NC ((unsigned int) 0x3 << 0) // (SDRC) Number of Column Bits +#define AT91C_SDRC_NC_8 ((unsigned int) 0x0) // (SDRC) 8 Bits +#define AT91C_SDRC_NC_9 ((unsigned int) 0x1) // (SDRC) 9 Bits +#define AT91C_SDRC_NC_10 ((unsigned int) 0x2) // (SDRC) 10 Bits +#define AT91C_SDRC_NC_11 ((unsigned int) 0x3) // (SDRC) 11 Bits +#define AT91C_SDRC_NR ((unsigned int) 0x3 << 2) // (SDRC) Number of Row Bits +#define AT91C_SDRC_NR_11 ((unsigned int) 0x0 << 2) // (SDRC) 11 Bits +#define AT91C_SDRC_NR_12 ((unsigned int) 0x1 << 2) // (SDRC) 12 Bits +#define AT91C_SDRC_NR_13 ((unsigned int) 0x2 << 2) // (SDRC) 13 Bits +#define AT91C_SDRC_NB ((unsigned int) 0x1 << 4) // (SDRC) Number of Banks +#define AT91C_SDRC_NB_2_BANKS ((unsigned int) 0x0 << 4) // (SDRC) 2 banks +#define AT91C_SDRC_NB_4_BANKS ((unsigned int) 0x1 << 4) // (SDRC) 4 banks +#define AT91C_SDRC_CAS ((unsigned int) 0x3 << 5) // (SDRC) CAS Latency +#define AT91C_SDRC_CAS_2 ((unsigned int) 0x2 << 5) // (SDRC) 2 cycles +#define AT91C_SDRC_TWR ((unsigned int) 0xF << 7) // (SDRC) Number of Write Recovery Time Cycles +#define AT91C_SDRC_TRC ((unsigned int) 0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles +#define AT91C_SDRC_TRP ((unsigned int) 0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles +#define AT91C_SDRC_TRCD ((unsigned int) 0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles +#define AT91C_SDRC_TRAS ((unsigned int) 0xF << 23) // (SDRC) Number of RAS Active Time Cycles +#define AT91C_SDRC_TXSR ((unsigned int) 0xF << 27) // (SDRC) Number of Command Recovery Time Cycles +// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- +#define AT91C_SDRC_SRCB ((unsigned int) 0x1 << 0) // (SDRC) Self-refresh Command Bit +// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- +#define AT91C_SDRC_LPCB ((unsigned int) 0x1 << 0) // (SDRC) Low-power Command Bit +// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- +#define AT91C_SDRC_RES ((unsigned int) 0x1 << 0) // (SDRC) Refresh Error Status +// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- +// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- +// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Burst Flash Controller Interface +// ***************************************************************************** +typedef struct _AT91S_BFC { + AT91_REG BFC_MR; // BFC Mode Register +} AT91S_BFC, *AT91PS_BFC; + +// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- +#define AT91C_BFC_BFCOM ((unsigned int) 0x3 << 0) // (BFC) Burst Flash Controller Operating Mode +#define AT91C_BFC_BFCOM_DISABLED ((unsigned int) 0x0) // (BFC) NPCS0 is driven by the SMC or remains high. +#define AT91C_BFC_BFCOM_ASYNC ((unsigned int) 0x1) // (BFC) Asynchronous +#define AT91C_BFC_BFCOM_BURST_READ ((unsigned int) 0x2) // (BFC) Burst Read +#define AT91C_BFC_BFCC ((unsigned int) 0x3 << 2) // (BFC) Burst Flash Controller Operating Mode +#define AT91C_BFC_BFCC_MCK ((unsigned int) 0x1 << 2) // (BFC) Master Clock. +#define AT91C_BFC_BFCC_MCK_DIV_2 ((unsigned int) 0x2 << 2) // (BFC) Master Clock divided by 2. +#define AT91C_BFC_BFCC_MCK_DIV_4 ((unsigned int) 0x3 << 2) // (BFC) Master Clock divided by 4. +#define AT91C_BFC_AVL ((unsigned int) 0xF << 4) // (BFC) Address Valid Latency +#define AT91C_BFC_PAGES ((unsigned int) 0x7 << 8) // (BFC) Page Size +#define AT91C_BFC_PAGES_NO_PAGE ((unsigned int) 0x0 << 8) // (BFC) No page handling. +#define AT91C_BFC_PAGES_16 ((unsigned int) 0x1 << 8) // (BFC) 16 bytes page size. +#define AT91C_BFC_PAGES_32 ((unsigned int) 0x2 << 8) // (BFC) 32 bytes page size. +#define AT91C_BFC_PAGES_64 ((unsigned int) 0x3 << 8) // (BFC) 64 bytes page size. +#define AT91C_BFC_PAGES_128 ((unsigned int) 0x4 << 8) // (BFC) 128 bytes page size. +#define AT91C_BFC_PAGES_256 ((unsigned int) 0x5 << 8) // (BFC) 256 bytes page size. +#define AT91C_BFC_PAGES_512 ((unsigned int) 0x6 << 8) // (BFC) 512 bytes page size. +#define AT91C_BFC_PAGES_1024 ((unsigned int) 0x7 << 8) // (BFC) 1024 bytes page size. +#define AT91C_BFC_OEL ((unsigned int) 0x3 << 12) // (BFC) Output Enable Latency +#define AT91C_BFC_BAAEN ((unsigned int) 0x1 << 16) // (BFC) Burst Address Advance Enable +#define AT91C_BFC_BFOEH ((unsigned int) 0x1 << 17) // (BFC) Burst Flash Output Enable Handling +#define AT91C_BFC_MUXEN ((unsigned int) 0x1 << 18) // (BFC) Multiplexed Bus Enable +#define AT91C_BFC_RDYEN ((unsigned int) 0x1 << 19) // (BFC) Ready Enable Mode + +// ***************************************************************************** +// REGISTER ADDRESS DEFINITION FOR AT91RM9200 +// ***************************************************************************** +// ========== Register definition for SYS peripheral ========== +// ========== Register definition for MC peripheral ========== +#define AT91C_MC_PUER ((AT91_REG *) 0xFFFFFF54) // (MC) MC Protection Unit Enable Register +#define AT91C_MC_ASR ((AT91_REG *) 0xFFFFFF04) // (MC) MC Abort Status Register +#define AT91C_MC_PUP ((AT91_REG *) 0xFFFFFF50) // (MC) MC Protection Unit Peripherals +#define AT91C_MC_PUIA ((AT91_REG *) 0xFFFFFF10) // (MC) MC Protection Unit Area +#define AT91C_MC_AASR ((AT91_REG *) 0xFFFFFF08) // (MC) MC Abort Address Status Register +#define AT91C_MC_RCR ((AT91_REG *) 0xFFFFFF00) // (MC) MC Remap Control Register +// ========== Register definition for RTC peripheral ========== +#define AT91C_RTC_IMR ((AT91_REG *) 0xFFFFFE28) // (RTC) Interrupt Mask Register +#define AT91C_RTC_IER ((AT91_REG *) 0xFFFFFE20) // (RTC) Interrupt Enable Register +#define AT91C_RTC_SR ((AT91_REG *) 0xFFFFFE18) // (RTC) Status Register +#define AT91C_RTC_TIMALR ((AT91_REG *) 0xFFFFFE10) // (RTC) Time Alarm Register +#define AT91C_RTC_TIMR ((AT91_REG *) 0xFFFFFE08) // (RTC) Time Register +#define AT91C_RTC_CR ((AT91_REG *) 0xFFFFFE00) // (RTC) Control Register +#define AT91C_RTC_VER ((AT91_REG *) 0xFFFFFE2C) // (RTC) Valid Entry Register +#define AT91C_RTC_IDR ((AT91_REG *) 0xFFFFFE24) // (RTC) Interrupt Disable Register +#define AT91C_RTC_SCCR ((AT91_REG *) 0xFFFFFE1C) // (RTC) Status Clear Command Register +#define AT91C_RTC_CALALR ((AT91_REG *) 0xFFFFFE14) // (RTC) Calendar Alarm Register +#define AT91C_RTC_CALR ((AT91_REG *) 0xFFFFFE0C) // (RTC) Calendar Register +#define AT91C_RTC_MR ((AT91_REG *) 0xFFFFFE04) // (RTC) Mode Register +// ========== Register definition for ST peripheral ========== +#define AT91C_ST_CRTR ((AT91_REG *) 0xFFFFFD24) // (ST) Current Real-time Register +#define AT91C_ST_IMR ((AT91_REG *) 0xFFFFFD1C) // (ST) Interrupt Mask Register +#define AT91C_ST_IER ((AT91_REG *) 0xFFFFFD14) // (ST) Interrupt Enable Register +#define AT91C_ST_RTMR ((AT91_REG *) 0xFFFFFD0C) // (ST) Real-time Mode Register +#define AT91C_ST_PIMR ((AT91_REG *) 0xFFFFFD04) // (ST) Period Interval Mode Register +#define AT91C_ST_RTAR ((AT91_REG *) 0xFFFFFD20) // (ST) Real-time Alarm Register +#define AT91C_ST_IDR ((AT91_REG *) 0xFFFFFD18) // (ST) Interrupt Disable Register +#define AT91C_ST_SR ((AT91_REG *) 0xFFFFFD10) // (ST) Status Register +#define AT91C_ST_WDMR ((AT91_REG *) 0xFFFFFD08) // (ST) Watchdog Mode Register +#define AT91C_ST_CR ((AT91_REG *) 0xFFFFFD00) // (ST) Control Register +// ========== Register definition for PMC peripheral ========== +#define AT91C_PMC_SCSR ((AT91_REG *) 0xFFFFFC08) // (PMC) System Clock Status Register +#define AT91C_PMC_SCER ((AT91_REG *) 0xFFFFFC00) // (PMC) System Clock Enable Register +#define AT91C_PMC_IMR ((AT91_REG *) 0xFFFFFC6C) // (PMC) Interrupt Mask Register +#define AT91C_PMC_IDR ((AT91_REG *) 0xFFFFFC64) // (PMC) Interrupt Disable Register +#define AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) // (PMC) Peripheral Clock Disable Register +#define AT91C_PMC_SCDR ((AT91_REG *) 0xFFFFFC04) // (PMC) System Clock Disable Register +#define AT91C_PMC_SR ((AT91_REG *) 0xFFFFFC68) // (PMC) Status Register +#define AT91C_PMC_IER ((AT91_REG *) 0xFFFFFC60) // (PMC) Interrupt Enable Register +#define AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register +#define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) // (PMC) Peripheral Clock Enable Register +#define AT91C_PMC_PCSR ((AT91_REG *) 0xFFFFFC18) // (PMC) Peripheral Clock Status Register +#define AT91C_PMC_PCKR ((AT91_REG *) 0xFFFFFC40) // (PMC) Programmable Clock Register +// ========== Register definition for CKGR peripheral ========== +#define AT91C_CKGR_PLLBR ((AT91_REG *) 0xFFFFFC2C) // (CKGR) PLL B Register +#define AT91C_CKGR_MCFR ((AT91_REG *) 0xFFFFFC24) // (CKGR) Main Clock Frequency Register +#define AT91C_CKGR_PLLAR ((AT91_REG *) 0xFFFFFC28) // (CKGR) PLL A Register +#define AT91C_CKGR_MOR ((AT91_REG *) 0xFFFFFC20) // (CKGR) Main Oscillator Register +// ========== Register definition for PIOD peripheral ========== +#define AT91C_PIOD_PDSR ((AT91_REG *) 0xFFFFFA3C) // (PIOD) Pin Data Status Register +#define AT91C_PIOD_CODR ((AT91_REG *) 0xFFFFFA34) // (PIOD) Clear Output Data Register +#define AT91C_PIOD_OWER ((AT91_REG *) 0xFFFFFAA0) // (PIOD) Output Write Enable Register +#define AT91C_PIOD_MDER ((AT91_REG *) 0xFFFFFA50) // (PIOD) Multi-driver Enable Register +#define AT91C_PIOD_IMR ((AT91_REG *) 0xFFFFFA48) // (PIOD) Interrupt Mask Register +#define AT91C_PIOD_IER ((AT91_REG *) 0xFFFFFA40) // (PIOD) Interrupt Enable Register +#define AT91C_PIOD_ODSR ((AT91_REG *) 0xFFFFFA38) // (PIOD) Output Data Status Register +#define AT91C_PIOD_SODR ((AT91_REG *) 0xFFFFFA30) // (PIOD) Set Output Data Register +#define AT91C_PIOD_PER ((AT91_REG *) 0xFFFFFA00) // (PIOD) PIO Enable Register +#define AT91C_PIOD_OWDR ((AT91_REG *) 0xFFFFFAA4) // (PIOD) Output Write Disable Register +#define AT91C_PIOD_PPUER ((AT91_REG *) 0xFFFFFA64) // (PIOD) Pull-up Enable Register +#define AT91C_PIOD_MDDR ((AT91_REG *) 0xFFFFFA54) // (PIOD) Multi-driver Disable Register +#define AT91C_PIOD_ISR ((AT91_REG *) 0xFFFFFA4C) // (PIOD) Interrupt Status Register +#define AT91C_PIOD_IDR ((AT91_REG *) 0xFFFFFA44) // (PIOD) Interrupt Disable Register +#define AT91C_PIOD_PDR ((AT91_REG *) 0xFFFFFA04) // (PIOD) PIO Disable Register +#define AT91C_PIOD_ODR ((AT91_REG *) 0xFFFFFA14) // (PIOD) Output Disable Registerr +#define AT91C_PIOD_OWSR ((AT91_REG *) 0xFFFFFAA8) // (PIOD) Output Write Status Register +#define AT91C_PIOD_ABSR ((AT91_REG *) 0xFFFFFA78) // (PIOD) AB Select Status Register +#define AT91C_PIOD_ASR ((AT91_REG *) 0xFFFFFA70) // (PIOD) Select A Register +#define AT91C_PIOD_PPUSR ((AT91_REG *) 0xFFFFFA68) // (PIOD) Pad Pull-up Status Register +#define AT91C_PIOD_PPUDR ((AT91_REG *) 0xFFFFFA60) // (PIOD) Pull-up Disable Register +#define AT91C_PIOD_MDSR ((AT91_REG *) 0xFFFFFA58) // (PIOD) Multi-driver Status Register +#define AT91C_PIOD_PSR ((AT91_REG *) 0xFFFFFA08) // (PIOD) PIO Status Register +#define AT91C_PIOD_OER ((AT91_REG *) 0xFFFFFA10) // (PIOD) Output Enable Register +#define AT91C_PIOD_OSR ((AT91_REG *) 0xFFFFFA18) // (PIOD) Output Status Register +#define AT91C_PIOD_IFER ((AT91_REG *) 0xFFFFFA20) // (PIOD) Input Filter Enable Register +#define AT91C_PIOD_BSR ((AT91_REG *) 0xFFFFFA74) // (PIOD) Select B Register +#define AT91C_PIOD_IFDR ((AT91_REG *) 0xFFFFFA24) // (PIOD) Input Filter Disable Register +#define AT91C_PIOD_IFSR ((AT91_REG *) 0xFFFFFA28) // (PIOD) Input Filter Status Register +// ========== Register definition for PIOC peripheral ========== +#define AT91C_PIOC_IFDR ((AT91_REG *) 0xFFFFF824) // (PIOC) Input Filter Disable Register +#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) // (PIOC) Output Disable Registerr +#define AT91C_PIOC_ABSR ((AT91_REG *) 0xFFFFF878) // (PIOC) AB Select Status Register +#define AT91C_PIOC_SODR ((AT91_REG *) 0xFFFFF830) // (PIOC) Set Output Data Register +#define AT91C_PIOC_IFSR ((AT91_REG *) 0xFFFFF828) // (PIOC) Input Filter Status Register +#define AT91C_PIOC_CODR ((AT91_REG *) 0xFFFFF834) // (PIOC) Clear Output Data Register +#define AT91C_PIOC_ODSR ((AT91_REG *) 0xFFFFF838) // (PIOC) Output Data Status Register +#define AT91C_PIOC_IER ((AT91_REG *) 0xFFFFF840) // (PIOC) Interrupt Enable Register +#define AT91C_PIOC_IMR ((AT91_REG *) 0xFFFFF848) // (PIOC) Interrupt Mask Register +#define AT91C_PIOC_OWDR ((AT91_REG *) 0xFFFFF8A4) // (PIOC) Output Write Disable Register +#define AT91C_PIOC_MDDR ((AT91_REG *) 0xFFFFF854) // (PIOC) Multi-driver Disable Register +#define AT91C_PIOC_PDSR ((AT91_REG *) 0xFFFFF83C) // (PIOC) Pin Data Status Register +#define AT91C_PIOC_IDR ((AT91_REG *) 0xFFFFF844) // (PIOC) Interrupt Disable Register +#define AT91C_PIOC_ISR ((AT91_REG *) 0xFFFFF84C) // (PIOC) Interrupt Status Register +#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) // (PIOC) PIO Disable Register +#define AT91C_PIOC_OWSR ((AT91_REG *) 0xFFFFF8A8) // (PIOC) Output Write Status Register +#define AT91C_PIOC_OWER ((AT91_REG *) 0xFFFFF8A0) // (PIOC) Output Write Enable Register +#define AT91C_PIOC_ASR ((AT91_REG *) 0xFFFFF870) // (PIOC) Select A Register +#define AT91C_PIOC_PPUSR ((AT91_REG *) 0xFFFFF868) // (PIOC) Pad Pull-up Status Register +#define AT91C_PIOC_PPUDR ((AT91_REG *) 0xFFFFF860) // (PIOC) Pull-up Disable Register +#define AT91C_PIOC_MDSR ((AT91_REG *) 0xFFFFF858) // (PIOC) Multi-driver Status Register +#define AT91C_PIOC_MDER ((AT91_REG *) 0xFFFFF850) // (PIOC) Multi-driver Enable Register +#define AT91C_PIOC_IFER ((AT91_REG *) 0xFFFFF820) // (PIOC) Input Filter Enable Register +#define AT91C_PIOC_OSR ((AT91_REG *) 0xFFFFF818) // (PIOC) Output Status Register +#define AT91C_PIOC_OER ((AT91_REG *) 0xFFFFF810) // (PIOC) Output Enable Register +#define AT91C_PIOC_PSR ((AT91_REG *) 0xFFFFF808) // (PIOC) PIO Status Register +#define AT91C_PIOC_PER ((AT91_REG *) 0xFFFFF800) // (PIOC) PIO Enable Register +#define AT91C_PIOC_BSR ((AT91_REG *) 0xFFFFF874) // (PIOC) Select B Register +#define AT91C_PIOC_PPUER ((AT91_REG *) 0xFFFFF864) // (PIOC) Pull-up Enable Register +// ========== Register definition for PIOB peripheral ========== +#define AT91C_PIOB_OWSR ((AT91_REG *) 0xFFFFF6A8) // (PIOB) Output Write Status Register +#define AT91C_PIOB_PPUSR ((AT91_REG *) 0xFFFFF668) // (PIOB) Pad Pull-up Status Register +#define AT91C_PIOB_PPUDR ((AT91_REG *) 0xFFFFF660) // (PIOB) Pull-up Disable Register +#define AT91C_PIOB_MDSR ((AT91_REG *) 0xFFFFF658) // (PIOB) Multi-driver Status Register +#define AT91C_PIOB_MDER ((AT91_REG *) 0xFFFFF650) // (PIOB) Multi-driver Enable Register +#define AT91C_PIOB_IMR ((AT91_REG *) 0xFFFFF648) // (PIOB) Interrupt Mask Register +#define AT91C_PIOB_OSR ((AT91_REG *) 0xFFFFF618) // (PIOB) Output Status Register +#define AT91C_PIOB_OER ((AT91_REG *) 0xFFFFF610) // (PIOB) Output Enable Register +#define AT91C_PIOB_PSR ((AT91_REG *) 0xFFFFF608) // (PIOB) PIO Status Register +#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) // (PIOB) PIO Enable Register +#define AT91C_PIOB_BSR ((AT91_REG *) 0xFFFFF674) // (PIOB) Select B Register +#define AT91C_PIOB_PPUER ((AT91_REG *) 0xFFFFF664) // (PIOB) Pull-up Enable Register +#define AT91C_PIOB_IFDR ((AT91_REG *) 0xFFFFF624) // (PIOB) Input Filter Disable Register +#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) // (PIOB) Output Disable Registerr +#define AT91C_PIOB_ABSR ((AT91_REG *) 0xFFFFF678) // (PIOB) AB Select Status Register +#define AT91C_PIOB_ASR ((AT91_REG *) 0xFFFFF670) // (PIOB) Select A Register +#define AT91C_PIOB_IFER ((AT91_REG *) 0xFFFFF620) // (PIOB) Input Filter Enable Register +#define AT91C_PIOB_IFSR ((AT91_REG *) 0xFFFFF628) // (PIOB) Input Filter Status Register +#define AT91C_PIOB_SODR ((AT91_REG *) 0xFFFFF630) // (PIOB) Set Output Data Register +#define AT91C_PIOB_ODSR ((AT91_REG *) 0xFFFFF638) // (PIOB) Output Data Status Register +#define AT91C_PIOB_CODR ((AT91_REG *) 0xFFFFF634) // (PIOB) Clear Output Data Register +#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) // (PIOB) Pin Data Status Register +#define AT91C_PIOB_OWER ((AT91_REG *) 0xFFFFF6A0) // (PIOB) Output Write Enable Register +#define AT91C_PIOB_IER ((AT91_REG *) 0xFFFFF640) // (PIOB) Interrupt Enable Register +#define AT91C_PIOB_OWDR ((AT91_REG *) 0xFFFFF6A4) // (PIOB) Output Write Disable Register +#define AT91C_PIOB_MDDR ((AT91_REG *) 0xFFFFF654) // (PIOB) Multi-driver Disable Register +#define AT91C_PIOB_ISR ((AT91_REG *) 0xFFFFF64C) // (PIOB) Interrupt Status Register +#define AT91C_PIOB_IDR ((AT91_REG *) 0xFFFFF644) // (PIOB) Interrupt Disable Register +#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) // (PIOB) PIO Disable Register +// ========== Register definition for PIOA peripheral ========== +#define AT91C_PIOA_IMR ((AT91_REG *) 0xFFFFF448) // (PIOA) Interrupt Mask Register +#define AT91C_PIOA_IER ((AT91_REG *) 0xFFFFF440) // (PIOA) Interrupt Enable Register +#define AT91C_PIOA_OWDR ((AT91_REG *) 0xFFFFF4A4) // (PIOA) Output Write Disable Register +#define AT91C_PIOA_ISR ((AT91_REG *) 0xFFFFF44C) // (PIOA) Interrupt Status Register +#define AT91C_PIOA_PPUDR ((AT91_REG *) 0xFFFFF460) // (PIOA) Pull-up Disable Register +#define AT91C_PIOA_MDSR ((AT91_REG *) 0xFFFFF458) // (PIOA) Multi-driver Status Register +#define AT91C_PIOA_MDER ((AT91_REG *) 0xFFFFF450) // (PIOA) Multi-driver Enable Register +#define AT91C_PIOA_PER ((AT91_REG *) 0xFFFFF400) // (PIOA) PIO Enable Register +#define AT91C_PIOA_PSR ((AT91_REG *) 0xFFFFF408) // (PIOA) PIO Status Register +#define AT91C_PIOA_OER ((AT91_REG *) 0xFFFFF410) // (PIOA) Output Enable Register +#define AT91C_PIOA_BSR ((AT91_REG *) 0xFFFFF474) // (PIOA) Select B Register +#define AT91C_PIOA_PPUER ((AT91_REG *) 0xFFFFF464) // (PIOA) Pull-up Enable Register +#define AT91C_PIOA_MDDR ((AT91_REG *) 0xFFFFF454) // (PIOA) Multi-driver Disable Register +#define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) // (PIOA) PIO Disable Register +#define AT91C_PIOA_ODR ((AT91_REG *) 0xFFFFF414) // (PIOA) Output Disable Registerr +#define AT91C_PIOA_IFDR ((AT91_REG *) 0xFFFFF424) // (PIOA) Input Filter Disable Register +#define AT91C_PIOA_ABSR ((AT91_REG *) 0xFFFFF478) // (PIOA) AB Select Status Register +#define AT91C_PIOA_ASR ((AT91_REG *) 0xFFFFF470) // (PIOA) Select A Register +#define AT91C_PIOA_PPUSR ((AT91_REG *) 0xFFFFF468) // (PIOA) Pad Pull-up Status Register +#define AT91C_PIOA_ODSR ((AT91_REG *) 0xFFFFF438) // (PIOA) Output Data Status Register +#define AT91C_PIOA_SODR ((AT91_REG *) 0xFFFFF430) // (PIOA) Set Output Data Register +#define AT91C_PIOA_IFSR ((AT91_REG *) 0xFFFFF428) // (PIOA) Input Filter Status Register +#define AT91C_PIOA_IFER ((AT91_REG *) 0xFFFFF420) // (PIOA) Input Filter Enable Register +#define AT91C_PIOA_OSR ((AT91_REG *) 0xFFFFF418) // (PIOA) Output Status Register +#define AT91C_PIOA_IDR ((AT91_REG *) 0xFFFFF444) // (PIOA) Interrupt Disable Register +#define AT91C_PIOA_PDSR ((AT91_REG *) 0xFFFFF43C) // (PIOA) Pin Data Status Register +#define AT91C_PIOA_CODR ((AT91_REG *) 0xFFFFF434) // (PIOA) Clear Output Data Register +#define AT91C_PIOA_OWSR ((AT91_REG *) 0xFFFFF4A8) // (PIOA) Output Write Status Register +#define AT91C_PIOA_OWER ((AT91_REG *) 0xFFFFF4A0) // (PIOA) Output Write Enable Register +// ========== Register definition for DBGU peripheral ========== +#define AT91C_DBGU_C2R ((AT91_REG *) 0xFFFFF244) // (DBGU) Chip ID2 Register +#define AT91C_DBGU_THR ((AT91_REG *) 0xFFFFF21C) // (DBGU) Transmitter Holding Register +#define AT91C_DBGU_CSR ((AT91_REG *) 0xFFFFF214) // (DBGU) Channel Status Register +#define AT91C_DBGU_IDR ((AT91_REG *) 0xFFFFF20C) // (DBGU) Interrupt Disable Register +#define AT91C_DBGU_MR ((AT91_REG *) 0xFFFFF204) // (DBGU) Mode Register +#define AT91C_DBGU_FNTR ((AT91_REG *) 0xFFFFF248) // (DBGU) Force NTRST Register +#define AT91C_DBGU_C1R ((AT91_REG *) 0xFFFFF240) // (DBGU) Chip ID1 Register +#define AT91C_DBGU_BRGR ((AT91_REG *) 0xFFFFF220) // (DBGU) Baud Rate Generator Register +#define AT91C_DBGU_RHR ((AT91_REG *) 0xFFFFF218) // (DBGU) Receiver Holding Register +#define AT91C_DBGU_IMR ((AT91_REG *) 0xFFFFF210) // (DBGU) Interrupt Mask Register +#define AT91C_DBGU_IER ((AT91_REG *) 0xFFFFF208) // (DBGU) Interrupt Enable Register +#define AT91C_DBGU_CR ((AT91_REG *) 0xFFFFF200) // (DBGU) Control Register +// ========== Register definition for PDC_DBGU peripheral ========== +#define AT91C_DBGU_TNCR ((AT91_REG *) 0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register +#define AT91C_DBGU_RNCR ((AT91_REG *) 0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register +#define AT91C_DBGU_PTCR ((AT91_REG *) 0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register +#define AT91C_DBGU_PTSR ((AT91_REG *) 0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register +#define AT91C_DBGU_RCR ((AT91_REG *) 0xFFFFF304) // (PDC_DBGU) Receive Counter Register +#define AT91C_DBGU_TCR ((AT91_REG *) 0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register +#define AT91C_DBGU_RPR ((AT91_REG *) 0xFFFFF300) // (PDC_DBGU) Receive Pointer Register +#define AT91C_DBGU_TPR ((AT91_REG *) 0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register +#define AT91C_DBGU_RNPR ((AT91_REG *) 0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register +#define AT91C_DBGU_TNPR ((AT91_REG *) 0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register +// ========== Register definition for AIC peripheral ========== +#define AT91C_AIC_ICCR ((AT91_REG *) 0xFFFFF128) // (AIC) Interrupt Clear Command Register +#define AT91C_AIC_IECR ((AT91_REG *) 0xFFFFF120) // (AIC) Interrupt Enable Command Register +#define AT91C_AIC_SMR ((AT91_REG *) 0xFFFFF000) // (AIC) Source Mode Register +#define AT91C_AIC_ISCR ((AT91_REG *) 0xFFFFF12C) // (AIC) Interrupt Set Command Register +#define AT91C_AIC_EOICR ((AT91_REG *) 0xFFFFF130) // (AIC) End of Interrupt Command Register +#define AT91C_AIC_DCR ((AT91_REG *) 0xFFFFF138) // (AIC) Debug Control Register (Protect) +#define AT91C_AIC_FFER ((AT91_REG *) 0xFFFFF140) // (AIC) Fast Forcing Enable Register +#define AT91C_AIC_SVR ((AT91_REG *) 0xFFFFF080) // (AIC) Source Vector Register +#define AT91C_AIC_SPU ((AT91_REG *) 0xFFFFF134) // (AIC) Spurious Vector Register +#define AT91C_AIC_FFDR ((AT91_REG *) 0xFFFFF144) // (AIC) Fast Forcing Disable Register +#define AT91C_AIC_FVR ((AT91_REG *) 0xFFFFF104) // (AIC) FIQ Vector Register +#define AT91C_AIC_FFSR ((AT91_REG *) 0xFFFFF148) // (AIC) Fast Forcing Status Register +#define AT91C_AIC_IMR ((AT91_REG *) 0xFFFFF110) // (AIC) Interrupt Mask Register +#define AT91C_AIC_ISR ((AT91_REG *) 0xFFFFF108) // (AIC) Interrupt Status Register +#define AT91C_AIC_IVR ((AT91_REG *) 0xFFFFF100) // (AIC) IRQ Vector Register +#define AT91C_AIC_IDCR ((AT91_REG *) 0xFFFFF124) // (AIC) Interrupt Disable Command Register +#define AT91C_AIC_CISR ((AT91_REG *) 0xFFFFF114) // (AIC) Core Interrupt Status Register +#define AT91C_AIC_IPR ((AT91_REG *) 0xFFFFF10C) // (AIC) Interrupt Pending Register +// ========== Register definition for PDC_SPI peripheral ========== +#define AT91C_SPI_PTCR ((AT91_REG *) 0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register +#define AT91C_SPI_TNPR ((AT91_REG *) 0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register +#define AT91C_SPI_RNPR ((AT91_REG *) 0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register +#define AT91C_SPI_TPR ((AT91_REG *) 0xFFFE0108) // (PDC_SPI) Transmit Pointer Register +#define AT91C_SPI_RPR ((AT91_REG *) 0xFFFE0100) // (PDC_SPI) Receive Pointer Register +#define AT91C_SPI_PTSR ((AT91_REG *) 0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register +#define AT91C_SPI_TNCR ((AT91_REG *) 0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register +#define AT91C_SPI_RNCR ((AT91_REG *) 0xFFFE0114) // (PDC_SPI) Receive Next Counter Register +#define AT91C_SPI_TCR ((AT91_REG *) 0xFFFE010C) // (PDC_SPI) Transmit Counter Register +#define AT91C_SPI_RCR ((AT91_REG *) 0xFFFE0104) // (PDC_SPI) Receive Counter Register +// ========== Register definition for SPI peripheral ========== +#define AT91C_SPI_CSR ((AT91_REG *) 0xFFFE0030) // (SPI) Chip Select Register +#define AT91C_SPI_IDR ((AT91_REG *) 0xFFFE0018) // (SPI) Interrupt Disable Register +#define AT91C_SPI_SR ((AT91_REG *) 0xFFFE0010) // (SPI) Status Register +#define AT91C_SPI_RDR ((AT91_REG *) 0xFFFE0008) // (SPI) Receive Data Register +#define AT91C_SPI_CR ((AT91_REG *) 0xFFFE0000) // (SPI) Control Register +#define AT91C_SPI_IMR ((AT91_REG *) 0xFFFE001C) // (SPI) Interrupt Mask Register +#define AT91C_SPI_IER ((AT91_REG *) 0xFFFE0014) // (SPI) Interrupt Enable Register +#define AT91C_SPI_TDR ((AT91_REG *) 0xFFFE000C) // (SPI) Transmit Data Register +#define AT91C_SPI_MR ((AT91_REG *) 0xFFFE0004) // (SPI) Mode Register +// ========== Register definition for PDC_SSC2 peripheral ========== +#define AT91C_SSC2_PTCR ((AT91_REG *) 0xFFFD8120) // (PDC_SSC2) PDC Transfer Control Register +#define AT91C_SSC2_TNPR ((AT91_REG *) 0xFFFD8118) // (PDC_SSC2) Transmit Next Pointer Register +#define AT91C_SSC2_RNPR ((AT91_REG *) 0xFFFD8110) // (PDC_SSC2) Receive Next Pointer Register +#define AT91C_SSC2_TPR ((AT91_REG *) 0xFFFD8108) // (PDC_SSC2) Transmit Pointer Register +#define AT91C_SSC2_RPR ((AT91_REG *) 0xFFFD8100) // (PDC_SSC2) Receive Pointer Register +#define AT91C_SSC2_PTSR ((AT91_REG *) 0xFFFD8124) // (PDC_SSC2) PDC Transfer Status Register +#define AT91C_SSC2_TNCR ((AT91_REG *) 0xFFFD811C) // (PDC_SSC2) Transmit Next Counter Register +#define AT91C_SSC2_RNCR ((AT91_REG *) 0xFFFD8114) // (PDC_SSC2) Receive Next Counter Register +#define AT91C_SSC2_TCR ((AT91_REG *) 0xFFFD810C) // (PDC_SSC2) Transmit Counter Register +#define AT91C_SSC2_RCR ((AT91_REG *) 0xFFFD8104) // (PDC_SSC2) Receive Counter Register +// ========== Register definition for SSC2 peripheral ========== +#define AT91C_SSC2_IMR ((AT91_REG *) 0xFFFD804C) // (SSC2) Interrupt Mask Register +#define AT91C_SSC2_IER ((AT91_REG *) 0xFFFD8044) // (SSC2) Interrupt Enable Register +#define AT91C_SSC2_RC1R ((AT91_REG *) 0xFFFD803C) // (SSC2) Receive Compare 1 Register +#define AT91C_SSC2_TSHR ((AT91_REG *) 0xFFFD8034) // (SSC2) Transmit Sync Holding Register +#define AT91C_SSC2_CMR ((AT91_REG *) 0xFFFD8004) // (SSC2) Clock Mode Register +#define AT91C_SSC2_IDR ((AT91_REG *) 0xFFFD8048) // (SSC2) Interrupt Disable Register +#define AT91C_SSC2_TCMR ((AT91_REG *) 0xFFFD8018) // (SSC2) Transmit Clock Mode Register +#define AT91C_SSC2_RCMR ((AT91_REG *) 0xFFFD8010) // (SSC2) Receive Clock ModeRegister +#define AT91C_SSC2_CR ((AT91_REG *) 0xFFFD8000) // (SSC2) Control Register +#define AT91C_SSC2_RFMR ((AT91_REG *) 0xFFFD8014) // (SSC2) Receive Frame Mode Register +#define AT91C_SSC2_TFMR ((AT91_REG *) 0xFFFD801C) // (SSC2) Transmit Frame Mode Register +#define AT91C_SSC2_THR ((AT91_REG *) 0xFFFD8024) // (SSC2) Transmit Holding Register +#define AT91C_SSC2_SR ((AT91_REG *) 0xFFFD8040) // (SSC2) Status Register +#define AT91C_SSC2_RC0R ((AT91_REG *) 0xFFFD8038) // (SSC2) Receive Compare 0 Register +#define AT91C_SSC2_RSHR ((AT91_REG *) 0xFFFD8030) // (SSC2) Receive Sync Holding Register +#define AT91C_SSC2_RHR ((AT91_REG *) 0xFFFD8020) // (SSC2) Receive Holding Register +// ========== Register definition for PDC_SSC1 peripheral ========== +#define AT91C_SSC1_PTCR ((AT91_REG *) 0xFFFD4120) // (PDC_SSC1) PDC Transfer Control Register +#define AT91C_SSC1_TNPR ((AT91_REG *) 0xFFFD4118) // (PDC_SSC1) Transmit Next Pointer Register +#define AT91C_SSC1_RNPR ((AT91_REG *) 0xFFFD4110) // (PDC_SSC1) Receive Next Pointer Register +#define AT91C_SSC1_TPR ((AT91_REG *) 0xFFFD4108) // (PDC_SSC1) Transmit Pointer Register +#define AT91C_SSC1_RPR ((AT91_REG *) 0xFFFD4100) // (PDC_SSC1) Receive Pointer Register +#define AT91C_SSC1_PTSR ((AT91_REG *) 0xFFFD4124) // (PDC_SSC1) PDC Transfer Status Register +#define AT91C_SSC1_TNCR ((AT91_REG *) 0xFFFD411C) // (PDC_SSC1) Transmit Next Counter Register +#define AT91C_SSC1_RNCR ((AT91_REG *) 0xFFFD4114) // (PDC_SSC1) Receive Next Counter Register +#define AT91C_SSC1_TCR ((AT91_REG *) 0xFFFD410C) // (PDC_SSC1) Transmit Counter Register +#define AT91C_SSC1_RCR ((AT91_REG *) 0xFFFD4104) // (PDC_SSC1) Receive Counter Register +// ========== Register definition for SSC1 peripheral ========== +#define AT91C_SSC1_RFMR ((AT91_REG *) 0xFFFD4014) // (SSC1) Receive Frame Mode Register +#define AT91C_SSC1_CMR ((AT91_REG *) 0xFFFD4004) // (SSC1) Clock Mode Register +#define AT91C_SSC1_IDR ((AT91_REG *) 0xFFFD4048) // (SSC1) Interrupt Disable Register +#define AT91C_SSC1_SR ((AT91_REG *) 0xFFFD4040) // (SSC1) Status Register +#define AT91C_SSC1_RC0R ((AT91_REG *) 0xFFFD4038) // (SSC1) Receive Compare 0 Register +#define AT91C_SSC1_RSHR ((AT91_REG *) 0xFFFD4030) // (SSC1) Receive Sync Holding Register +#define AT91C_SSC1_RHR ((AT91_REG *) 0xFFFD4020) // (SSC1) Receive Holding Register +#define AT91C_SSC1_TCMR ((AT91_REG *) 0xFFFD4018) // (SSC1) Transmit Clock Mode Register +#define AT91C_SSC1_RCMR ((AT91_REG *) 0xFFFD4010) // (SSC1) Receive Clock ModeRegister +#define AT91C_SSC1_CR ((AT91_REG *) 0xFFFD4000) // (SSC1) Control Register +#define AT91C_SSC1_IMR ((AT91_REG *) 0xFFFD404C) // (SSC1) Interrupt Mask Register +#define AT91C_SSC1_IER ((AT91_REG *) 0xFFFD4044) // (SSC1) Interrupt Enable Register +#define AT91C_SSC1_RC1R ((AT91_REG *) 0xFFFD403C) // (SSC1) Receive Compare 1 Register +#define AT91C_SSC1_TSHR ((AT91_REG *) 0xFFFD4034) // (SSC1) Transmit Sync Holding Register +#define AT91C_SSC1_THR ((AT91_REG *) 0xFFFD4024) // (SSC1) Transmit Holding Register +#define AT91C_SSC1_TFMR ((AT91_REG *) 0xFFFD401C) // (SSC1) Transmit Frame Mode Register +// ========== Register definition for PDC_SSC0 peripheral ========== +#define AT91C_SSC0_PTCR ((AT91_REG *) 0xFFFD0120) // (PDC_SSC0) PDC Transfer Control Register +#define AT91C_SSC0_TNPR ((AT91_REG *) 0xFFFD0118) // (PDC_SSC0) Transmit Next Pointer Register +#define AT91C_SSC0_RNPR ((AT91_REG *) 0xFFFD0110) // (PDC_SSC0) Receive Next Pointer Register +#define AT91C_SSC0_TPR ((AT91_REG *) 0xFFFD0108) // (PDC_SSC0) Transmit Pointer Register +#define AT91C_SSC0_RPR ((AT91_REG *) 0xFFFD0100) // (PDC_SSC0) Receive Pointer Register +#define AT91C_SSC0_PTSR ((AT91_REG *) 0xFFFD0124) // (PDC_SSC0) PDC Transfer Status Register +#define AT91C_SSC0_TNCR ((AT91_REG *) 0xFFFD011C) // (PDC_SSC0) Transmit Next Counter Register +#define AT91C_SSC0_RNCR ((AT91_REG *) 0xFFFD0114) // (PDC_SSC0) Receive Next Counter Register +#define AT91C_SSC0_TCR ((AT91_REG *) 0xFFFD010C) // (PDC_SSC0) Transmit Counter Register +#define AT91C_SSC0_RCR ((AT91_REG *) 0xFFFD0104) // (PDC_SSC0) Receive Counter Register +// ========== Register definition for SSC0 peripheral ========== +#define AT91C_SSC0_IMR ((AT91_REG *) 0xFFFD004C) // (SSC0) Interrupt Mask Register +#define AT91C_SSC0_IER ((AT91_REG *) 0xFFFD0044) // (SSC0) Interrupt Enable Register +#define AT91C_SSC0_RC1R ((AT91_REG *) 0xFFFD003C) // (SSC0) Receive Compare 1 Register +#define AT91C_SSC0_TSHR ((AT91_REG *) 0xFFFD0034) // (SSC0) Transmit Sync Holding Register +#define AT91C_SSC0_THR ((AT91_REG *) 0xFFFD0024) // (SSC0) Transmit Holding Register +#define AT91C_SSC0_TFMR ((AT91_REG *) 0xFFFD001C) // (SSC0) Transmit Frame Mode Register +#define AT91C_SSC0_RFMR ((AT91_REG *) 0xFFFD0014) // (SSC0) Receive Frame Mode Register +#define AT91C_SSC0_CMR ((AT91_REG *) 0xFFFD0004) // (SSC0) Clock Mode Register +#define AT91C_SSC0_IDR ((AT91_REG *) 0xFFFD0048) // (SSC0) Interrupt Disable Register +#define AT91C_SSC0_SR ((AT91_REG *) 0xFFFD0040) // (SSC0) Status Register +#define AT91C_SSC0_RC0R ((AT91_REG *) 0xFFFD0038) // (SSC0) Receive Compare 0 Register +#define AT91C_SSC0_RSHR ((AT91_REG *) 0xFFFD0030) // (SSC0) Receive Sync Holding Register +#define AT91C_SSC0_RHR ((AT91_REG *) 0xFFFD0020) // (SSC0) Receive Holding Register +#define AT91C_SSC0_TCMR ((AT91_REG *) 0xFFFD0018) // (SSC0) Transmit Clock Mode Register +#define AT91C_SSC0_RCMR ((AT91_REG *) 0xFFFD0010) // (SSC0) Receive Clock ModeRegister +#define AT91C_SSC0_CR ((AT91_REG *) 0xFFFD0000) // (SSC0) Control Register +// ========== Register definition for PDC_US3 peripheral ========== +#define AT91C_US3_PTSR ((AT91_REG *) 0xFFFCC124) // (PDC_US3) PDC Transfer Status Register +#define AT91C_US3_TNCR ((AT91_REG *) 0xFFFCC11C) // (PDC_US3) Transmit Next Counter Register +#define AT91C_US3_RNCR ((AT91_REG *) 0xFFFCC114) // (PDC_US3) Receive Next Counter Register +#define AT91C_US3_TCR ((AT91_REG *) 0xFFFCC10C) // (PDC_US3) Transmit Counter Register +#define AT91C_US3_RCR ((AT91_REG *) 0xFFFCC104) // (PDC_US3) Receive Counter Register +#define AT91C_US3_PTCR ((AT91_REG *) 0xFFFCC120) // (PDC_US3) PDC Transfer Control Register +#define AT91C_US3_TNPR ((AT91_REG *) 0xFFFCC118) // (PDC_US3) Transmit Next Pointer Register +#define AT91C_US3_RNPR ((AT91_REG *) 0xFFFCC110) // (PDC_US3) Receive Next Pointer Register +#define AT91C_US3_TPR ((AT91_REG *) 0xFFFCC108) // (PDC_US3) Transmit Pointer Register +#define AT91C_US3_RPR ((AT91_REG *) 0xFFFCC100) // (PDC_US3) Receive Pointer Register +// ========== Register definition for US3 peripheral ========== +#define AT91C_US3_IF ((AT91_REG *) 0xFFFCC04C) // (US3) IRDA_FILTER Register +#define AT91C_US3_NER ((AT91_REG *) 0xFFFCC044) // (US3) Nb Errors Register +#define AT91C_US3_RTOR ((AT91_REG *) 0xFFFCC024) // (US3) Receiver Time-out Register +#define AT91C_US3_THR ((AT91_REG *) 0xFFFCC01C) // (US3) Transmitter Holding Register +#define AT91C_US3_CSR ((AT91_REG *) 0xFFFCC014) // (US3) Channel Status Register +#define AT91C_US3_IDR ((AT91_REG *) 0xFFFCC00C) // (US3) Interrupt Disable Register +#define AT91C_US3_MR ((AT91_REG *) 0xFFFCC004) // (US3) Mode Register +#define AT91C_US3_XXR ((AT91_REG *) 0xFFFCC048) // (US3) XON_XOFF Register +#define AT91C_US3_FIDI ((AT91_REG *) 0xFFFCC040) // (US3) FI_DI_Ratio Register +#define AT91C_US3_TTGR ((AT91_REG *) 0xFFFCC028) // (US3) Transmitter Time-guard Register +#define AT91C_US3_BRGR ((AT91_REG *) 0xFFFCC020) // (US3) Baud Rate Generator Register +#define AT91C_US3_RHR ((AT91_REG *) 0xFFFCC018) // (US3) Receiver Holding Register +#define AT91C_US3_IMR ((AT91_REG *) 0xFFFCC010) // (US3) Interrupt Mask Register +#define AT91C_US3_IER ((AT91_REG *) 0xFFFCC008) // (US3) Interrupt Enable Register +#define AT91C_US3_CR ((AT91_REG *) 0xFFFCC000) // (US3) Control Register +// ========== Register definition for PDC_US2 peripheral ========== +#define AT91C_US2_PTSR ((AT91_REG *) 0xFFFC8124) // (PDC_US2) PDC Transfer Status Register +#define AT91C_US2_TNCR ((AT91_REG *) 0xFFFC811C) // (PDC_US2) Transmit Next Counter Register +#define AT91C_US2_RNCR ((AT91_REG *) 0xFFFC8114) // (PDC_US2) Receive Next Counter Register +#define AT91C_US2_TCR ((AT91_REG *) 0xFFFC810C) // (PDC_US2) Transmit Counter Register +#define AT91C_US2_PTCR ((AT91_REG *) 0xFFFC8120) // (PDC_US2) PDC Transfer Control Register +#define AT91C_US2_RCR ((AT91_REG *) 0xFFFC8104) // (PDC_US2) Receive Counter Register +#define AT91C_US2_TNPR ((AT91_REG *) 0xFFFC8118) // (PDC_US2) Transmit Next Pointer Register +#define AT91C_US2_RPR ((AT91_REG *) 0xFFFC8100) // (PDC_US2) Receive Pointer Register +#define AT91C_US2_TPR ((AT91_REG *) 0xFFFC8108) // (PDC_US2) Transmit Pointer Register +#define AT91C_US2_RNPR ((AT91_REG *) 0xFFFC8110) // (PDC_US2) Receive Next Pointer Register +// ========== Register definition for US2 peripheral ========== +#define AT91C_US2_XXR ((AT91_REG *) 0xFFFC8048) // (US2) XON_XOFF Register +#define AT91C_US2_FIDI ((AT91_REG *) 0xFFFC8040) // (US2) FI_DI_Ratio Register +#define AT91C_US2_TTGR ((AT91_REG *) 0xFFFC8028) // (US2) Transmitter Time-guard Register +#define AT91C_US2_BRGR ((AT91_REG *) 0xFFFC8020) // (US2) Baud Rate Generator Register +#define AT91C_US2_RHR ((AT91_REG *) 0xFFFC8018) // (US2) Receiver Holding Register +#define AT91C_US2_IMR ((AT91_REG *) 0xFFFC8010) // (US2) Interrupt Mask Register +#define AT91C_US2_IER ((AT91_REG *) 0xFFFC8008) // (US2) Interrupt Enable Register +#define AT91C_US2_CR ((AT91_REG *) 0xFFFC8000) // (US2) Control Register +#define AT91C_US2_IF ((AT91_REG *) 0xFFFC804C) // (US2) IRDA_FILTER Register +#define AT91C_US2_NER ((AT91_REG *) 0xFFFC8044) // (US2) Nb Errors Register +#define AT91C_US2_RTOR ((AT91_REG *) 0xFFFC8024) // (US2) Receiver Time-out Register +#define AT91C_US2_THR ((AT91_REG *) 0xFFFC801C) // (US2) Transmitter Holding Register +#define AT91C_US2_CSR ((AT91_REG *) 0xFFFC8014) // (US2) Channel Status Register +#define AT91C_US2_IDR ((AT91_REG *) 0xFFFC800C) // (US2) Interrupt Disable Register +#define AT91C_US2_MR ((AT91_REG *) 0xFFFC8004) // (US2) Mode Register +// ========== Register definition for PDC_US1 peripheral ========== +#define AT91C_US1_PTSR ((AT91_REG *) 0xFFFC4124) // (PDC_US1) PDC Transfer Status Register +#define AT91C_US1_TNCR ((AT91_REG *) 0xFFFC411C) // (PDC_US1) Transmit Next Counter Register +#define AT91C_US1_RNCR ((AT91_REG *) 0xFFFC4114) // (PDC_US1) Receive Next Counter Register +#define AT91C_US1_TCR ((AT91_REG *) 0xFFFC410C) // (PDC_US1) Transmit Counter Register +#define AT91C_US1_RCR ((AT91_REG *) 0xFFFC4104) // (PDC_US1) Receive Counter Register +#define AT91C_US1_PTCR ((AT91_REG *) 0xFFFC4120) // (PDC_US1) PDC Transfer Control Register +#define AT91C_US1_TNPR ((AT91_REG *) 0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register +#define AT91C_US1_RNPR ((AT91_REG *) 0xFFFC4110) // (PDC_US1) Receive Next Pointer Register +#define AT91C_US1_TPR ((AT91_REG *) 0xFFFC4108) // (PDC_US1) Transmit Pointer Register +#define AT91C_US1_RPR ((AT91_REG *) 0xFFFC4100) // (PDC_US1) Receive Pointer Register +// ========== Register definition for US1 peripheral ========== +#define AT91C_US1_XXR ((AT91_REG *) 0xFFFC4048) // (US1) XON_XOFF Register +#define AT91C_US1_RHR ((AT91_REG *) 0xFFFC4018) // (US1) Receiver Holding Register +#define AT91C_US1_IMR ((AT91_REG *) 0xFFFC4010) // (US1) Interrupt Mask Register +#define AT91C_US1_IER ((AT91_REG *) 0xFFFC4008) // (US1) Interrupt Enable Register +#define AT91C_US1_CR ((AT91_REG *) 0xFFFC4000) // (US1) Control Register +#define AT91C_US1_RTOR ((AT91_REG *) 0xFFFC4024) // (US1) Receiver Time-out Register +#define AT91C_US1_THR ((AT91_REG *) 0xFFFC401C) // (US1) Transmitter Holding Register +#define AT91C_US1_CSR ((AT91_REG *) 0xFFFC4014) // (US1) Channel Status Register +#define AT91C_US1_IDR ((AT91_REG *) 0xFFFC400C) // (US1) Interrupt Disable Register +#define AT91C_US1_FIDI ((AT91_REG *) 0xFFFC4040) // (US1) FI_DI_Ratio Register +#define AT91C_US1_BRGR ((AT91_REG *) 0xFFFC4020) // (US1) Baud Rate Generator Register +#define AT91C_US1_TTGR ((AT91_REG *) 0xFFFC4028) // (US1) Transmitter Time-guard Register +#define AT91C_US1_IF ((AT91_REG *) 0xFFFC404C) // (US1) IRDA_FILTER Register +#define AT91C_US1_NER ((AT91_REG *) 0xFFFC4044) // (US1) Nb Errors Register +#define AT91C_US1_MR ((AT91_REG *) 0xFFFC4004) // (US1) Mode Register +// ========== Register definition for PDC_US0 peripheral ========== +#define AT91C_US0_PTCR ((AT91_REG *) 0xFFFC0120) // (PDC_US0) PDC Transfer Control Register +#define AT91C_US0_TNPR ((AT91_REG *) 0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register +#define AT91C_US0_RNPR ((AT91_REG *) 0xFFFC0110) // (PDC_US0) Receive Next Pointer Register +#define AT91C_US0_TPR ((AT91_REG *) 0xFFFC0108) // (PDC_US0) Transmit Pointer Register +#define AT91C_US0_RPR ((AT91_REG *) 0xFFFC0100) // (PDC_US0) Receive Pointer Register +#define AT91C_US0_PTSR ((AT91_REG *) 0xFFFC0124) // (PDC_US0) PDC Transfer Status Register +#define AT91C_US0_TNCR ((AT91_REG *) 0xFFFC011C) // (PDC_US0) Transmit Next Counter Register +#define AT91C_US0_RNCR ((AT91_REG *) 0xFFFC0114) // (PDC_US0) Receive Next Counter Register +#define AT91C_US0_TCR ((AT91_REG *) 0xFFFC010C) // (PDC_US0) Transmit Counter Register +#define AT91C_US0_RCR ((AT91_REG *) 0xFFFC0104) // (PDC_US0) Receive Counter Register +// ========== Register definition for US0 peripheral ========== +#define AT91C_US0_TTGR ((AT91_REG *) 0xFFFC0028) // (US0) Transmitter Time-guard Register +#define AT91C_US0_BRGR ((AT91_REG *) 0xFFFC0020) // (US0) Baud Rate Generator Register +#define AT91C_US0_RHR ((AT91_REG *) 0xFFFC0018) // (US0) Receiver Holding Register +#define AT91C_US0_IMR ((AT91_REG *) 0xFFFC0010) // (US0) Interrupt Mask Register +#define AT91C_US0_NER ((AT91_REG *) 0xFFFC0044) // (US0) Nb Errors Register +#define AT91C_US0_RTOR ((AT91_REG *) 0xFFFC0024) // (US0) Receiver Time-out Register +#define AT91C_US0_XXR ((AT91_REG *) 0xFFFC0048) // (US0) XON_XOFF Register +#define AT91C_US0_FIDI ((AT91_REG *) 0xFFFC0040) // (US0) FI_DI_Ratio Register +#define AT91C_US0_CR ((AT91_REG *) 0xFFFC0000) // (US0) Control Register +#define AT91C_US0_IER ((AT91_REG *) 0xFFFC0008) // (US0) Interrupt Enable Register +#define AT91C_US0_IF ((AT91_REG *) 0xFFFC004C) // (US0) IRDA_FILTER Register +#define AT91C_US0_MR ((AT91_REG *) 0xFFFC0004) // (US0) Mode Register +#define AT91C_US0_IDR ((AT91_REG *) 0xFFFC000C) // (US0) Interrupt Disable Register +#define AT91C_US0_CSR ((AT91_REG *) 0xFFFC0014) // (US0) Channel Status Register +#define AT91C_US0_THR ((AT91_REG *) 0xFFFC001C) // (US0) Transmitter Holding Register +// ========== Register definition for TWI peripheral ========== +#define AT91C_TWI_RHR ((AT91_REG *) 0xFFFB8030) // (TWI) Receive Holding Register +#define AT91C_TWI_IDR ((AT91_REG *) 0xFFFB8028) // (TWI) Interrupt Disable Register +#define AT91C_TWI_SR ((AT91_REG *) 0xFFFB8020) // (TWI) Status Register +#define AT91C_TWI_CWGR ((AT91_REG *) 0xFFFB8010) // (TWI) Clock Waveform Generator Register +#define AT91C_TWI_SMR ((AT91_REG *) 0xFFFB8008) // (TWI) Slave Mode Register +#define AT91C_TWI_CR ((AT91_REG *) 0xFFFB8000) // (TWI) Control Register +#define AT91C_TWI_THR ((AT91_REG *) 0xFFFB8034) // (TWI) Transmit Holding Register +#define AT91C_TWI_IMR ((AT91_REG *) 0xFFFB802C) // (TWI) Interrupt Mask Register +#define AT91C_TWI_IER ((AT91_REG *) 0xFFFB8024) // (TWI) Interrupt Enable Register +#define AT91C_TWI_IADR ((AT91_REG *) 0xFFFB800C) // (TWI) Internal Address Register +#define AT91C_TWI_MMR ((AT91_REG *) 0xFFFB8004) // (TWI) Master Mode Register +// ========== Register definition for PDC_MCI peripheral ========== +#define AT91C_MCI_PTCR ((AT91_REG *) 0xFFFB4120) // (PDC_MCI) PDC Transfer Control Register +#define AT91C_MCI_TNPR ((AT91_REG *) 0xFFFB4118) // (PDC_MCI) Transmit Next Pointer Register +#define AT91C_MCI_RNPR ((AT91_REG *) 0xFFFB4110) // (PDC_MCI) Receive Next Pointer Register +#define AT91C_MCI_TPR ((AT91_REG *) 0xFFFB4108) // (PDC_MCI) Transmit Pointer Register +#define AT91C_MCI_RPR ((AT91_REG *) 0xFFFB4100) // (PDC_MCI) Receive Pointer Register +#define AT91C_MCI_PTSR ((AT91_REG *) 0xFFFB4124) // (PDC_MCI) PDC Transfer Status Register +#define AT91C_MCI_TNCR ((AT91_REG *) 0xFFFB411C) // (PDC_MCI) Transmit Next Counter Register +#define AT91C_MCI_RNCR ((AT91_REG *) 0xFFFB4114) // (PDC_MCI) Receive Next Counter Register +#define AT91C_MCI_TCR ((AT91_REG *) 0xFFFB410C) // (PDC_MCI) Transmit Counter Register +#define AT91C_MCI_RCR ((AT91_REG *) 0xFFFB4104) // (PDC_MCI) Receive Counter Register +// ========== Register definition for MCI peripheral ========== +#define AT91C_MCI_IDR ((AT91_REG *) 0xFFFB4048) // (MCI) MCI Interrupt Disable Register +#define AT91C_MCI_SR ((AT91_REG *) 0xFFFB4040) // (MCI) MCI Status Register +#define AT91C_MCI_RDR ((AT91_REG *) 0xFFFB4030) // (MCI) MCI Receive Data Register +#define AT91C_MCI_RSPR ((AT91_REG *) 0xFFFB4020) // (MCI) MCI Response Register +#define AT91C_MCI_ARGR ((AT91_REG *) 0xFFFB4010) // (MCI) MCI Argument Register +#define AT91C_MCI_DTOR ((AT91_REG *) 0xFFFB4008) // (MCI) MCI Data Timeout Register +#define AT91C_MCI_CR ((AT91_REG *) 0xFFFB4000) // (MCI) MCI Control Register +#define AT91C_MCI_IMR ((AT91_REG *) 0xFFFB404C) // (MCI) MCI Interrupt Mask Register +#define AT91C_MCI_IER ((AT91_REG *) 0xFFFB4044) // (MCI) MCI Interrupt Enable Register +#define AT91C_MCI_TDR ((AT91_REG *) 0xFFFB4034) // (MCI) MCI Transmit Data Register +#define AT91C_MCI_CMDR ((AT91_REG *) 0xFFFB4014) // (MCI) MCI Command Register +#define AT91C_MCI_SDCR ((AT91_REG *) 0xFFFB400C) // (MCI) MCI SD Card Register +#define AT91C_MCI_MR ((AT91_REG *) 0xFFFB4004) // (MCI) MCI Mode Register +// ========== Register definition for UDP peripheral ========== +#define AT91C_UDP_ISR ((AT91_REG *) 0xFFFB001C) // (UDP) Interrupt Status Register +#define AT91C_UDP_IDR ((AT91_REG *) 0xFFFB0014) // (UDP) Interrupt Disable Register +#define AT91C_UDP_GLBSTATE ((AT91_REG *) 0xFFFB0004) // (UDP) Global State Register +#define AT91C_UDP_FDR ((AT91_REG *) 0xFFFB0050) // (UDP) Endpoint FIFO Data Register +#define AT91C_UDP_CSR ((AT91_REG *) 0xFFFB0030) // (UDP) Endpoint Control and Status Register +#define AT91C_UDP_RSTEP ((AT91_REG *) 0xFFFB0028) // (UDP) Reset Endpoint Register +#define AT91C_UDP_ICR ((AT91_REG *) 0xFFFB0020) // (UDP) Interrupt Clear Register +#define AT91C_UDP_IMR ((AT91_REG *) 0xFFFB0018) // (UDP) Interrupt Mask Register +#define AT91C_UDP_IER ((AT91_REG *) 0xFFFB0010) // (UDP) Interrupt Enable Register +#define AT91C_UDP_FADDR ((AT91_REG *) 0xFFFB0008) // (UDP) Function Address Register +#define AT91C_UDP_NUM ((AT91_REG *) 0xFFFB0000) // (UDP) Frame Number Register +// ========== Register definition for TC5 peripheral ========== +#define AT91C_TC5_CMR ((AT91_REG *) 0xFFFA4084) // (TC5) Channel Mode Register +#define AT91C_TC5_IDR ((AT91_REG *) 0xFFFA40A8) // (TC5) Interrupt Disable Register +#define AT91C_TC5_SR ((AT91_REG *) 0xFFFA40A0) // (TC5) Status Register +#define AT91C_TC5_RB ((AT91_REG *) 0xFFFA4098) // (TC5) Register B +#define AT91C_TC5_CV ((AT91_REG *) 0xFFFA4090) // (TC5) Counter Value +#define AT91C_TC5_CCR ((AT91_REG *) 0xFFFA4080) // (TC5) Channel Control Register +#define AT91C_TC5_IMR ((AT91_REG *) 0xFFFA40AC) // (TC5) Interrupt Mask Register +#define AT91C_TC5_IER ((AT91_REG *) 0xFFFA40A4) // (TC5) Interrupt Enable Register +#define AT91C_TC5_RC ((AT91_REG *) 0xFFFA409C) // (TC5) Register C +#define AT91C_TC5_RA ((AT91_REG *) 0xFFFA4094) // (TC5) Register A +// ========== Register definition for TC4 peripheral ========== +#define AT91C_TC4_IMR ((AT91_REG *) 0xFFFA406C) // (TC4) Interrupt Mask Register +#define AT91C_TC4_IER ((AT91_REG *) 0xFFFA4064) // (TC4) Interrupt Enable Register +#define AT91C_TC4_RC ((AT91_REG *) 0xFFFA405C) // (TC4) Register C +#define AT91C_TC4_RA ((AT91_REG *) 0xFFFA4054) // (TC4) Register A +#define AT91C_TC4_CMR ((AT91_REG *) 0xFFFA4044) // (TC4) Channel Mode Register +#define AT91C_TC4_IDR ((AT91_REG *) 0xFFFA4068) // (TC4) Interrupt Disable Register +#define AT91C_TC4_SR ((AT91_REG *) 0xFFFA4060) // (TC4) Status Register +#define AT91C_TC4_RB ((AT91_REG *) 0xFFFA4058) // (TC4) Register B +#define AT91C_TC4_CV ((AT91_REG *) 0xFFFA4050) // (TC4) Counter Value +#define AT91C_TC4_CCR ((AT91_REG *) 0xFFFA4040) // (TC4) Channel Control Register +// ========== Register definition for TC3 peripheral ========== +#define AT91C_TC3_IMR ((AT91_REG *) 0xFFFA402C) // (TC3) Interrupt Mask Register +#define AT91C_TC3_CV ((AT91_REG *) 0xFFFA4010) // (TC3) Counter Value +#define AT91C_TC3_CCR ((AT91_REG *) 0xFFFA4000) // (TC3) Channel Control Register +#define AT91C_TC3_IER ((AT91_REG *) 0xFFFA4024) // (TC3) Interrupt Enable Register +#define AT91C_TC3_CMR ((AT91_REG *) 0xFFFA4004) // (TC3) Channel Mode Register +#define AT91C_TC3_RA ((AT91_REG *) 0xFFFA4014) // (TC3) Register A +#define AT91C_TC3_RC ((AT91_REG *) 0xFFFA401C) // (TC3) Register C +#define AT91C_TC3_IDR ((AT91_REG *) 0xFFFA4028) // (TC3) Interrupt Disable Register +#define AT91C_TC3_RB ((AT91_REG *) 0xFFFA4018) // (TC3) Register B +#define AT91C_TC3_SR ((AT91_REG *) 0xFFFA4020) // (TC3) Status Register +// ========== Register definition for TCB1 peripheral ========== +#define AT91C_TCB1_BCR ((AT91_REG *) 0xFFFA4140) // (TCB1) TC Block Control Register +#define AT91C_TCB1_BMR ((AT91_REG *) 0xFFFA4144) // (TCB1) TC Block Mode Register +// ========== Register definition for TC2 peripheral ========== +#define AT91C_TC2_IMR ((AT91_REG *) 0xFFFA00AC) // (TC2) Interrupt Mask Register +#define AT91C_TC2_IER ((AT91_REG *) 0xFFFA00A4) // (TC2) Interrupt Enable Register +#define AT91C_TC2_RC ((AT91_REG *) 0xFFFA009C) // (TC2) Register C +#define AT91C_TC2_RA ((AT91_REG *) 0xFFFA0094) // (TC2) Register A +#define AT91C_TC2_CMR ((AT91_REG *) 0xFFFA0084) // (TC2) Channel Mode Register +#define AT91C_TC2_IDR ((AT91_REG *) 0xFFFA00A8) // (TC2) Interrupt Disable Register +#define AT91C_TC2_SR ((AT91_REG *) 0xFFFA00A0) // (TC2) Status Register +#define AT91C_TC2_RB ((AT91_REG *) 0xFFFA0098) // (TC2) Register B +#define AT91C_TC2_CV ((AT91_REG *) 0xFFFA0090) // (TC2) Counter Value +#define AT91C_TC2_CCR ((AT91_REG *) 0xFFFA0080) // (TC2) Channel Control Register +// ========== Register definition for TC1 peripheral ========== +#define AT91C_TC1_IMR ((AT91_REG *) 0xFFFA006C) // (TC1) Interrupt Mask Register +#define AT91C_TC1_IER ((AT91_REG *) 0xFFFA0064) // (TC1) Interrupt Enable Register +#define AT91C_TC1_RC ((AT91_REG *) 0xFFFA005C) // (TC1) Register C +#define AT91C_TC1_RA ((AT91_REG *) 0xFFFA0054) // (TC1) Register A +#define AT91C_TC1_CMR ((AT91_REG *) 0xFFFA0044) // (TC1) Channel Mode Register +#define AT91C_TC1_IDR ((AT91_REG *) 0xFFFA0068) // (TC1) Interrupt Disable Register +#define AT91C_TC1_SR ((AT91_REG *) 0xFFFA0060) // (TC1) Status Register +#define AT91C_TC1_RB ((AT91_REG *) 0xFFFA0058) // (TC1) Register B +#define AT91C_TC1_CV ((AT91_REG *) 0xFFFA0050) // (TC1) Counter Value +#define AT91C_TC1_CCR ((AT91_REG *) 0xFFFA0040) // (TC1) Channel Control Register +// ========== Register definition for TC0 peripheral ========== +#define AT91C_TC0_IMR ((AT91_REG *) 0xFFFA002C) // (TC0) Interrupt Mask Register +#define AT91C_TC0_IER ((AT91_REG *) 0xFFFA0024) // (TC0) Interrupt Enable Register +#define AT91C_TC0_RC ((AT91_REG *) 0xFFFA001C) // (TC0) Register C +#define AT91C_TC0_RA ((AT91_REG *) 0xFFFA0014) // (TC0) Register A +#define AT91C_TC0_CMR ((AT91_REG *) 0xFFFA0004) // (TC0) Channel Mode Register +#define AT91C_TC0_IDR ((AT91_REG *) 0xFFFA0028) // (TC0) Interrupt Disable Register +#define AT91C_TC0_SR ((AT91_REG *) 0xFFFA0020) // (TC0) Status Register +#define AT91C_TC0_RB ((AT91_REG *) 0xFFFA0018) // (TC0) Register B +#define AT91C_TC0_CV ((AT91_REG *) 0xFFFA0010) // (TC0) Counter Value +#define AT91C_TC0_CCR ((AT91_REG *) 0xFFFA0000) // (TC0) Channel Control Register +// ========== Register definition for TCB0 peripheral ========== +#define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) // (TCB0) TC Block Mode Register +#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) // (TCB0) TC Block Control Register +// ========== Register definition for UHP peripheral ========== +#define AT91C_UHP_HcRhDescriptorA ((AT91_REG *) 0x00300048) // (UHP) Root Hub characteristics A +#define AT91C_UHP_HcRhPortStatus ((AT91_REG *) 0x00300054) // (UHP) Root Hub Port Status Register +#define AT91C_UHP_HcRhDescriptorB ((AT91_REG *) 0x0030004C) // (UHP) Root Hub characteristics B +#define AT91C_UHP_HcControl ((AT91_REG *) 0x00300004) // (UHP) Operating modes for the Host Controller +#define AT91C_UHP_HcInterruptStatus ((AT91_REG *) 0x0030000C) // (UHP) Interrupt Status Register +#define AT91C_UHP_HcRhStatus ((AT91_REG *) 0x00300050) // (UHP) Root Hub Status register +#define AT91C_UHP_HcRevision ((AT91_REG *) 0x00300000) // (UHP) Revision +#define AT91C_UHP_HcCommandStatus ((AT91_REG *) 0x00300008) // (UHP) Command & status Register +#define AT91C_UHP_HcInterruptEnable ((AT91_REG *) 0x00300010) // (UHP) Interrupt Enable Register +#define AT91C_UHP_HcHCCA ((AT91_REG *) 0x00300018) // (UHP) Pointer to the Host Controller Communication Area +#define AT91C_UHP_HcControlHeadED ((AT91_REG *) 0x00300020) // (UHP) First Endpoint Descriptor of the Control list +#define AT91C_UHP_HcInterruptDisable ((AT91_REG *) 0x00300014) // (UHP) Interrupt Disable Register +#define AT91C_UHP_HcPeriodCurrentED ((AT91_REG *) 0x0030001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor +#define AT91C_UHP_HcControlCurrentED ((AT91_REG *) 0x00300024) // (UHP) Endpoint Control and Status Register +#define AT91C_UHP_HcBulkCurrentED ((AT91_REG *) 0x0030002C) // (UHP) Current endpoint of the Bulk list +#define AT91C_UHP_HcFmInterval ((AT91_REG *) 0x00300034) // (UHP) Bit time between 2 consecutive SOFs +#define AT91C_UHP_HcBulkHeadED ((AT91_REG *) 0x00300028) // (UHP) First endpoint register of the Bulk list +#define AT91C_UHP_HcBulkDoneHead ((AT91_REG *) 0x00300030) // (UHP) Last completed transfer descriptor +#define AT91C_UHP_HcFmRemaining ((AT91_REG *) 0x00300038) // (UHP) Bit time remaining in the current Frame +#define AT91C_UHP_HcPeriodicStart ((AT91_REG *) 0x00300040) // (UHP) Periodic Start +#define AT91C_UHP_HcLSThreshold ((AT91_REG *) 0x00300044) // (UHP) LS Threshold +#define AT91C_UHP_HcFmNumber ((AT91_REG *) 0x0030003C) // (UHP) Frame number +// ========== Register definition for EMAC peripheral ========== +#define AT91C_EMAC_RSR ((AT91_REG *) 0xFFFBC020) // (EMAC) Receive Status Register +#define AT91C_EMAC_MAN ((AT91_REG *) 0xFFFBC034) // (EMAC) PHY Maintenance Register +#define AT91C_EMAC_HSH ((AT91_REG *) 0xFFFBC090) // (EMAC) Hash Address High[63:32] +#define AT91C_EMAC_MCOL ((AT91_REG *) 0xFFFBC048) // (EMAC) Multiple Collision Frame Register +#define AT91C_EMAC_IER ((AT91_REG *) 0xFFFBC028) // (EMAC) Interrupt Enable Register +#define AT91C_EMAC_SA2H ((AT91_REG *) 0xFFFBC0A4) // (EMAC) Specific Address 2 High, Last 2 bytes +#define AT91C_EMAC_HSL ((AT91_REG *) 0xFFFBC094) // (EMAC) Hash Address Low[31:0] +#define AT91C_EMAC_LCOL ((AT91_REG *) 0xFFFBC05C) // (EMAC) Late Collision Register +#define AT91C_EMAC_OK ((AT91_REG *) 0xFFFBC04C) // (EMAC) Frames Received OK Register +#define AT91C_EMAC_CFG ((AT91_REG *) 0xFFFBC004) // (EMAC) Network Configuration Register +#define AT91C_EMAC_SA3L ((AT91_REG *) 0xFFFBC0A8) // (EMAC) Specific Address 3 Low, First 4 bytes +#define AT91C_EMAC_SEQE ((AT91_REG *) 0xFFFBC050) // (EMAC) Frame Check Sequence Error Register +#define AT91C_EMAC_ECOL ((AT91_REG *) 0xFFFBC060) // (EMAC) Excessive Collision Register +#define AT91C_EMAC_ELR ((AT91_REG *) 0xFFFBC070) // (EMAC) Excessive Length Error Register +#define AT91C_EMAC_SR ((AT91_REG *) 0xFFFBC008) // (EMAC) Network Status Register +#define AT91C_EMAC_RBQP ((AT91_REG *) 0xFFFBC018) // (EMAC) Receive Buffer Queue Pointer +#define AT91C_EMAC_CSE ((AT91_REG *) 0xFFFBC064) // (EMAC) Carrier Sense Error Register +#define AT91C_EMAC_RJB ((AT91_REG *) 0xFFFBC074) // (EMAC) Receive Jabber Register +#define AT91C_EMAC_USF ((AT91_REG *) 0xFFFBC078) // (EMAC) Undersize Frame Register +#define AT91C_EMAC_IDR ((AT91_REG *) 0xFFFBC02C) // (EMAC) Interrupt Disable Register +#define AT91C_EMAC_SA1L ((AT91_REG *) 0xFFFBC098) // (EMAC) Specific Address 1 Low, First 4 bytes +#define AT91C_EMAC_IMR ((AT91_REG *) 0xFFFBC030) // (EMAC) Interrupt Mask Register +#define AT91C_EMAC_FRA ((AT91_REG *) 0xFFFBC040) // (EMAC) Frames Transmitted OK Register +#define AT91C_EMAC_SA3H ((AT91_REG *) 0xFFFBC0AC) // (EMAC) Specific Address 3 High, Last 2 bytes +#define AT91C_EMAC_SA1H ((AT91_REG *) 0xFFFBC09C) // (EMAC) Specific Address 1 High, Last 2 bytes +#define AT91C_EMAC_SCOL ((AT91_REG *) 0xFFFBC044) // (EMAC) Single Collision Frame Register +#define AT91C_EMAC_ALE ((AT91_REG *) 0xFFFBC054) // (EMAC) Alignment Error Register +#define AT91C_EMAC_TAR ((AT91_REG *) 0xFFFBC00C) // (EMAC) Transmit Address Register +#define AT91C_EMAC_SA4L ((AT91_REG *) 0xFFFBC0B0) // (EMAC) Specific Address 4 Low, First 4 bytes +#define AT91C_EMAC_SA2L ((AT91_REG *) 0xFFFBC0A0) // (EMAC) Specific Address 2 Low, First 4 bytes +#define AT91C_EMAC_TUE ((AT91_REG *) 0xFFFBC068) // (EMAC) Transmit Underrun Error Register +#define AT91C_EMAC_DTE ((AT91_REG *) 0xFFFBC058) // (EMAC) Deferred Transmission Frame Register +#define AT91C_EMAC_TCR ((AT91_REG *) 0xFFFBC010) // (EMAC) Transmit Control Register +#define AT91C_EMAC_CTL ((AT91_REG *) 0xFFFBC000) // (EMAC) Network Control Register +#define AT91C_EMAC_SA4H ((AT91_REG *) 0xFFFBC0B4) // (EMAC) Specific Address 4 High, Last 2 bytesr +#define AT91C_EMAC_CDE ((AT91_REG *) 0xFFFBC06C) // (EMAC) Code Error Register +#define AT91C_EMAC_SQEE ((AT91_REG *) 0xFFFBC07C) // (EMAC) SQE Test Error Register +#define AT91C_EMAC_TSR ((AT91_REG *) 0xFFFBC014) // (EMAC) Transmit Status Register +#define AT91C_EMAC_DRFC ((AT91_REG *) 0xFFFBC080) // (EMAC) Discarded RX Frame Register +// ========== Register definition for EBI peripheral ========== +#define AT91C_EBI_CFGR ((AT91_REG *) 0xFFFFFF64) // (EBI) Configuration Register +#define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) // (EBI) Chip Select Assignment Register +// ========== Register definition for SMC2 peripheral ========== +#define AT91C_SMC2_CSR ((AT91_REG *) 0xFFFFFF70) // (SMC2) SMC2 Chip Select Register +// ========== Register definition for SDRC peripheral ========== +#define AT91C_SDRC_IMR ((AT91_REG *) 0xFFFFFFAC) // (SDRC) SDRAM Controller Interrupt Mask Register +#define AT91C_SDRC_IER ((AT91_REG *) 0xFFFFFFA4) // (SDRC) SDRAM Controller Interrupt Enable Register +#define AT91C_SDRC_SRR ((AT91_REG *) 0xFFFFFF9C) // (SDRC) SDRAM Controller Self Refresh Register +#define AT91C_SDRC_TR ((AT91_REG *) 0xFFFFFF94) // (SDRC) SDRAM Controller Refresh Timer Register +#define AT91C_SDRC_ISR ((AT91_REG *) 0xFFFFFFB0) // (SDRC) SDRAM Controller Interrupt Mask Register +#define AT91C_SDRC_IDR ((AT91_REG *) 0xFFFFFFA8) // (SDRC) SDRAM Controller Interrupt Disable Register +#define AT91C_SDRC_LPR ((AT91_REG *) 0xFFFFFFA0) // (SDRC) SDRAM Controller Low Power Register +#define AT91C_SDRC_CR ((AT91_REG *) 0xFFFFFF98) // (SDRC) SDRAM Controller Configuration Register +#define AT91C_SDRC_MR ((AT91_REG *) 0xFFFFFF90) // (SDRC) SDRAM Controller Mode Register +// ========== Register definition for BFC peripheral ========== +#define AT91C_BFC_MR ((AT91_REG *) 0xFFFFFFC0) // (BFC) BFC Mode Register + +// ***************************************************************************** +// PIO DEFINITIONS FOR AT91RM9200 +// ***************************************************************************** +#define AT91C_PIO_PA0 ((unsigned int) 1 << 0) // Pin Controlled by PA0 +#define AT91C_PA0_MISO ((unsigned int) AT91C_PIO_PA0) // SPI Master In Slave +#define AT91C_PA0_PCK3 ((unsigned int) AT91C_PIO_PA0) // PMC Programmable Clock Output 3 +#define AT91C_PIO_PA1 ((unsigned int) 1 << 1) // Pin Controlled by PA1 +#define AT91C_PA1_MOSI ((unsigned int) AT91C_PIO_PA1) // SPI Master Out Slave +#define AT91C_PA1_PCK0 ((unsigned int) AT91C_PIO_PA1) // PMC Programmable Clock Output 0 +#define AT91C_PIO_PA10 ((unsigned int) 1 << 10) // Pin Controlled by PA10 +#define AT91C_PA10_ETX1 ((unsigned int) AT91C_PIO_PA10) // Ethernet MAC Transmit Data 1 +#define AT91C_PA10_MCDB1 ((unsigned int) AT91C_PIO_PA10) // Multimedia Card B Data 1 +#define AT91C_PIO_PA11 ((unsigned int) 1 << 11) // Pin Controlled by PA11 +#define AT91C_PA11_ECRS_ECRSDV ((unsigned int) AT91C_PIO_PA11) // Ethernet MAC Carrier Sense/Carrier Sense and Data Valid +#define AT91C_PA11_MCDB2 ((unsigned int) AT91C_PIO_PA11) // Multimedia Card B Data 2 +#define AT91C_PIO_PA12 ((unsigned int) 1 << 12) // Pin Controlled by PA12 +#define AT91C_PA12_ERX0 ((unsigned int) AT91C_PIO_PA12) // Ethernet MAC Receive Data 0 +#define AT91C_PA12_MCDB3 ((unsigned int) AT91C_PIO_PA12) // Multimedia Card B Data 3 +#define AT91C_PIO_PA13 ((unsigned int) 1 << 13) // Pin Controlled by PA13 +#define AT91C_PA13_ERX1 ((unsigned int) AT91C_PIO_PA13) // Ethernet MAC Receive Data 1 +#define AT91C_PA13_TCLK0 ((unsigned int) AT91C_PIO_PA13) // Timer Counter 0 external clock input +#define AT91C_PIO_PA14 ((unsigned int) 1 << 14) // Pin Controlled by PA14 +#define AT91C_PA14_ERXER ((unsigned int) AT91C_PIO_PA14) // Ethernet MAC Receive Error +#define AT91C_PA14_TCLK1 ((unsigned int) AT91C_PIO_PA14) // Timer Counter 1 external clock input +#define AT91C_PIO_PA15 ((unsigned int) 1 << 15) // Pin Controlled by PA15 +#define AT91C_PA15_EMDC ((unsigned int) AT91C_PIO_PA15) // Ethernet MAC Management Data Clock +#define AT91C_PA15_TCLK2 ((unsigned int) AT91C_PIO_PA15) // Timer Counter 2 external clock input +#define AT91C_PIO_PA16 ((unsigned int) 1 << 16) // Pin Controlled by PA16 +#define AT91C_PA16_EMDIO ((unsigned int) AT91C_PIO_PA16) // Ethernet MAC Management Data Input/Output +#define AT91C_PA16_IRQ6 ((unsigned int) AT91C_PIO_PA16) // AIC Interrupt input 6 +#define AT91C_PIO_PA17 ((unsigned int) 1 << 17) // Pin Controlled by PA17 +#define AT91C_PA17_TXD0 ((unsigned int) AT91C_PIO_PA17) // USART 0 Transmit Data +#define AT91C_PA17_TIOA0 ((unsigned int) AT91C_PIO_PA17) // Timer Counter 0 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA18 ((unsigned int) 1 << 18) // Pin Controlled by PA18 +#define AT91C_PA18_RXD0 ((unsigned int) AT91C_PIO_PA18) // USART 0 Receive Data +#define AT91C_PA18_TIOB0 ((unsigned int) AT91C_PIO_PA18) // Timer Counter 0 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) // Pin Controlled by PA19 +#define AT91C_PA19_SCK0 ((unsigned int) AT91C_PIO_PA19) // USART 0 Serial Clock +#define AT91C_PA19_TIOA1 ((unsigned int) AT91C_PIO_PA19) // Timer Counter 1 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA2 ((unsigned int) 1 << 2) // Pin Controlled by PA2 +#define AT91C_PA2_SPCK ((unsigned int) AT91C_PIO_PA2) // SPI Serial Clock +#define AT91C_PA2_IRQ4 ((unsigned int) AT91C_PIO_PA2) // AIC Interrupt Input 4 +#define AT91C_PIO_PA20 ((unsigned int) 1 << 20) // Pin Controlled by PA20 +#define AT91C_PA20_CTS0 ((unsigned int) AT91C_PIO_PA20) // USART 0 Clear To Send +#define AT91C_PA20_TIOB1 ((unsigned int) AT91C_PIO_PA20) // Timer Counter 1 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA21 ((unsigned int) 1 << 21) // Pin Controlled by PA21 +#define AT91C_PA21_RTS0 ((unsigned int) AT91C_PIO_PA21) // Usart 0 Ready To Send +#define AT91C_PA21_TIOA2 ((unsigned int) AT91C_PIO_PA21) // Timer Counter 2 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) // Pin Controlled by PA22 +#define AT91C_PA22_RXD2 ((unsigned int) AT91C_PIO_PA22) // USART 2 Receive Data +#define AT91C_PA22_TIOB2 ((unsigned int) AT91C_PIO_PA22) // Timer Counter 2 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA23 ((unsigned int) 1 << 23) // Pin Controlled by PA23 +#define AT91C_PA23_TXD2 ((unsigned int) AT91C_PIO_PA23) // USART 2 Transmit Data +#define AT91C_PA23_IRQ3 ((unsigned int) AT91C_PIO_PA23) // Interrupt input 3 +#define AT91C_PIO_PA24 ((unsigned int) 1 << 24) // Pin Controlled by PA24 +#define AT91C_PA24_SCK2 ((unsigned int) AT91C_PIO_PA24) // USART2 Serial Clock +#define AT91C_PA24_PCK1 ((unsigned int) AT91C_PIO_PA24) // PMC Programmable Clock Output 1 +#define AT91C_PIO_PA25 ((unsigned int) 1 << 25) // Pin Controlled by PA25 +#define AT91C_PA25_TWD ((unsigned int) AT91C_PIO_PA25) // TWI Two-wire Serial Data +#define AT91C_PA25_IRQ2 ((unsigned int) AT91C_PIO_PA25) // Interrupt input 2 +#define AT91C_PIO_PA26 ((unsigned int) 1 << 26) // Pin Controlled by PA26 +#define AT91C_PA26_TWCK ((unsigned int) AT91C_PIO_PA26) // TWI Two-wire Serial Clock +#define AT91C_PA26_IRQ1 ((unsigned int) AT91C_PIO_PA26) // Interrupt input 1 +#define AT91C_PIO_PA27 ((unsigned int) 1 << 27) // Pin Controlled by PA27 +#define AT91C_PA27_MCCK ((unsigned int) AT91C_PIO_PA27) // Multimedia Card Clock +#define AT91C_PA27_TCLK3 ((unsigned int) AT91C_PIO_PA27) // Timer Counter 3 External Clock Input +#define AT91C_PIO_PA28 ((unsigned int) 1 << 28) // Pin Controlled by PA28 +#define AT91C_PA28_MCCDA ((unsigned int) AT91C_PIO_PA28) // Multimedia Card A Command +#define AT91C_PA28_TCLK4 ((unsigned int) AT91C_PIO_PA28) // Timer Counter 4 external Clock Input +#define AT91C_PIO_PA29 ((unsigned int) 1 << 29) // Pin Controlled by PA29 +#define AT91C_PA29_MCDA0 ((unsigned int) AT91C_PIO_PA29) // Multimedia Card A Data 0 +#define AT91C_PA29_TCLK5 ((unsigned int) AT91C_PIO_PA29) // Timer Counter 5 external clock input +#define AT91C_PIO_PA3 ((unsigned int) 1 << 3) // Pin Controlled by PA3 +#define AT91C_PA3_NPCS0 ((unsigned int) AT91C_PIO_PA3) // SPI Peripheral Chip Select 0 +#define AT91C_PA3_IRQ5 ((unsigned int) AT91C_PIO_PA3) // AIC Interrupt Input 5 +#define AT91C_PIO_PA30 ((unsigned int) 1 << 30) // Pin Controlled by PA30 +#define AT91C_PA30_DRXD ((unsigned int) AT91C_PIO_PA30) // DBGU Debug Receive Data +#define AT91C_PA30_CTS2 ((unsigned int) AT91C_PIO_PA30) // Usart 2 Clear To Send +#define AT91C_PIO_PA31 ((unsigned int) 1 << 31) // Pin Controlled by PA31 +#define AT91C_PA31_DTXD ((unsigned int) AT91C_PIO_PA31) // DBGU Debug Transmit Data +#define AT91C_PA31_RTS2 ((unsigned int) AT91C_PIO_PA31) // USART 2 Ready To Send +#define AT91C_PIO_PA4 ((unsigned int) 1 << 4) // Pin Controlled by PA4 +#define AT91C_PA4_NPCS1 ((unsigned int) AT91C_PIO_PA4) // SPI Peripheral Chip Select 1 +#define AT91C_PA4_PCK1 ((unsigned int) AT91C_PIO_PA4) // PMC Programmable Clock Output 1 +#define AT91C_PIO_PA5 ((unsigned int) 1 << 5) // Pin Controlled by PA5 +#define AT91C_PA5_NPCS2 ((unsigned int) AT91C_PIO_PA5) // SPI Peripheral Chip Select 2 +#define AT91C_PA5_TXD3 ((unsigned int) AT91C_PIO_PA5) // USART 3 Transmit Data +#define AT91C_PIO_PA6 ((unsigned int) 1 << 6) // Pin Controlled by PA6 +#define AT91C_PA6_NPCS3 ((unsigned int) AT91C_PIO_PA6) // SPI Peripheral Chip Select 3 +#define AT91C_PA6_RXD3 ((unsigned int) AT91C_PIO_PA6) // USART 3 Receive Data +#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) // Pin Controlled by PA7 +#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) // Ethernet MAC Transmit Clock/Reference Clock +#define AT91C_PA7_PCK2 ((unsigned int) AT91C_PIO_PA7) // PMC Programmable Clock 2 +#define AT91C_PIO_PA8 ((unsigned int) 1 << 8) // Pin Controlled by PA8 +#define AT91C_PA8_ETXEN ((unsigned int) AT91C_PIO_PA8) // Ethernet MAC Transmit Enable +#define AT91C_PA8_MCCDB ((unsigned int) AT91C_PIO_PA8) // Multimedia Card B Command +#define AT91C_PIO_PA9 ((unsigned int) 1 << 9) // Pin Controlled by PA9 +#define AT91C_PA9_ETX0 ((unsigned int) AT91C_PIO_PA9) // Ethernet MAC Transmit Data 0 +#define AT91C_PA9_MCDB0 ((unsigned int) AT91C_PIO_PA9) // Multimedia Card B Data 0 +#define AT91C_PIO_PB0 ((unsigned int) 1 << 0) // Pin Controlled by PB0 +#define AT91C_PB0_TF0 ((unsigned int) AT91C_PIO_PB0) // SSC Transmit Frame Sync 0 +#define AT91C_PB0_TIOB3 ((unsigned int) AT91C_PIO_PB0) // Timer Counter 3 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) // Pin Controlled by PB1 +#define AT91C_PB1_TK0 ((unsigned int) AT91C_PIO_PB1) // SSC Transmit Clock 0 +#define AT91C_PB1_CTS3 ((unsigned int) AT91C_PIO_PB1) // USART 3 Clear To Send +#define AT91C_PIO_PB10 ((unsigned int) 1 << 10) // Pin Controlled by PB10 +#define AT91C_PB10_RK1 ((unsigned int) AT91C_PIO_PB10) // SSC Receive Clock 1 +#define AT91C_PB10_TIOA5 ((unsigned int) AT91C_PIO_PB10) // Timer Counter 5 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PB11 ((unsigned int) 1 << 11) // Pin Controlled by PB11 +#define AT91C_PB11_RF1 ((unsigned int) AT91C_PIO_PB11) // SSC Receive Frame Sync 1 +#define AT91C_PB11_TIOB5 ((unsigned int) AT91C_PIO_PB11) // Timer Counter 5 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PB12 ((unsigned int) 1 << 12) // Pin Controlled by PB12 +#define AT91C_PB12_TF2 ((unsigned int) AT91C_PIO_PB12) // SSC Transmit Frame Sync 2 +#define AT91C_PB12_ETX2 ((unsigned int) AT91C_PIO_PB12) // Ethernet MAC Transmit Data 2 +#define AT91C_PIO_PB13 ((unsigned int) 1 << 13) // Pin Controlled by PB13 +#define AT91C_PB13_TK2 ((unsigned int) AT91C_PIO_PB13) // SSC Transmit Clock 2 +#define AT91C_PB13_ETX3 ((unsigned int) AT91C_PIO_PB13) // Ethernet MAC Transmit Data 3 +#define AT91C_PIO_PB14 ((unsigned int) 1 << 14) // Pin Controlled by PB14 +#define AT91C_PB14_TD2 ((unsigned int) AT91C_PIO_PB14) // SSC Transmit Data 2 +#define AT91C_PB14_ETXER ((unsigned int) AT91C_PIO_PB14) // Ethernet MAC Transmikt Coding Error +#define AT91C_PIO_PB15 ((unsigned int) 1 << 15) // Pin Controlled by PB15 +#define AT91C_PB15_RD2 ((unsigned int) AT91C_PIO_PB15) // SSC Receive Data 2 +#define AT91C_PB15_ERX2 ((unsigned int) AT91C_PIO_PB15) // Ethernet MAC Receive Data 2 +#define AT91C_PIO_PB16 ((unsigned int) 1 << 16) // Pin Controlled by PB16 +#define AT91C_PB16_RK2 ((unsigned int) AT91C_PIO_PB16) // SSC Receive Clock 2 +#define AT91C_PB16_ERX3 ((unsigned int) AT91C_PIO_PB16) // Ethernet MAC Receive Data 3 +#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) // Pin Controlled by PB17 +#define AT91C_PB17_RF2 ((unsigned int) AT91C_PIO_PB17) // SSC Receive Frame Sync 2 +#define AT91C_PB17_ERXDV ((unsigned int) AT91C_PIO_PB17) // Ethernet MAC Receive Data Valid +#define AT91C_PIO_PB18 ((unsigned int) 1 << 18) // Pin Controlled by PB18 +#define AT91C_PB18_RI1 ((unsigned int) AT91C_PIO_PB18) // USART 1 Ring Indicator +#define AT91C_PB18_ECOL ((unsigned int) AT91C_PIO_PB18) // Ethernet MAC Collision Detected +#define AT91C_PIO_PB19 ((unsigned int) 1 << 19) // Pin Controlled by PB19 +#define AT91C_PB19_DTR1 ((unsigned int) AT91C_PIO_PB19) // USART 1 Data Terminal ready +#define AT91C_PB19_ERXCK ((unsigned int) AT91C_PIO_PB19) // Ethernet MAC Receive Clock +#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) // Pin Controlled by PB2 +#define AT91C_PB2_TD0 ((unsigned int) AT91C_PIO_PB2) // SSC Transmit data +#define AT91C_PB2_SCK3 ((unsigned int) AT91C_PIO_PB2) // USART 3 Serial Clock +#define AT91C_PIO_PB20 ((unsigned int) 1 << 20) // Pin Controlled by PB20 +#define AT91C_PB20_TXD1 ((unsigned int) AT91C_PIO_PB20) // USART 1 Transmit Data +#define AT91C_PIO_PB21 ((unsigned int) 1 << 21) // Pin Controlled by PB21 +#define AT91C_PB21_RXD1 ((unsigned int) AT91C_PIO_PB21) // USART 1 Receive Data +#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) // Pin Controlled by PB22 +#define AT91C_PB22_SCK1 ((unsigned int) AT91C_PIO_PB22) // USART1 Serial Clock +#define AT91C_PIO_PB23 ((unsigned int) 1 << 23) // Pin Controlled by PB23 +#define AT91C_PB23_DCD1 ((unsigned int) AT91C_PIO_PB23) // USART 1 Data Carrier Detect +#define AT91C_PIO_PB24 ((unsigned int) 1 << 24) // Pin Controlled by PB24 +#define AT91C_PB24_CTS1 ((unsigned int) AT91C_PIO_PB24) // USART 1 Clear To Send +#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) // Pin Controlled by PB25 +#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) // USART 1 Data Set ready +#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) // Ethernet MAC Force 100 Mbits/sec +#define AT91C_PIO_PB26 ((unsigned int) 1 << 26) // Pin Controlled by PB26 +#define AT91C_PB26_RTS1 ((unsigned int) AT91C_PIO_PB26) // Usart 0 Ready To Send +#define AT91C_PIO_PB27 ((unsigned int) 1 << 27) // Pin Controlled by PB27 +#define AT91C_PB27_PCK0 ((unsigned int) AT91C_PIO_PB27) // PMC Programmable Clock Output 0 +#define AT91C_PIO_PB28 ((unsigned int) 1 << 28) // Pin Controlled by PB28 +#define AT91C_PB28_FIQ ((unsigned int) AT91C_PIO_PB28) // AIC Fast Interrupt Input +#define AT91C_PIO_PB29 ((unsigned int) 1 << 29) // Pin Controlled by PB29 +#define AT91C_PB29_IRQ0 ((unsigned int) AT91C_PIO_PB29) // Interrupt input 0 +#define AT91C_PIO_PB3 ((unsigned int) 1 << 3) // Pin Controlled by PB3 +#define AT91C_PB3_RD0 ((unsigned int) AT91C_PIO_PB3) // SSC Receive Data +#define AT91C_PB3_MCDA1 ((unsigned int) AT91C_PIO_PB3) // Multimedia Card A Data 1 +#define AT91C_PIO_PB4 ((unsigned int) 1 << 4) // Pin Controlled by PB4 +#define AT91C_PB4_RK0 ((unsigned int) AT91C_PIO_PB4) // SSC Receive Clock +#define AT91C_PB4_MCDA2 ((unsigned int) AT91C_PIO_PB4) // Multimedia Card A Data 2 +#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) // Pin Controlled by PB5 +#define AT91C_PB5_RF0 ((unsigned int) AT91C_PIO_PB5) // SSC Receive Frame Sync 0 +#define AT91C_PB5_MCDA3 ((unsigned int) AT91C_PIO_PB5) // Multimedia Card A Data 3 +#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) // Pin Controlled by PB6 +#define AT91C_PB6_TF1 ((unsigned int) AT91C_PIO_PB6) // SSC Transmit Frame Sync 1 +#define AT91C_PB6_TIOA3 ((unsigned int) AT91C_PIO_PB6) // Timer Counter 4 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) // Pin Controlled by PB7 +#define AT91C_PB7_TK1 ((unsigned int) AT91C_PIO_PB7) // SSC Transmit Clock 1 +#define AT91C_PB7_TIOB3 ((unsigned int) AT91C_PIO_PB7) // Timer Counter 3 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PB8 ((unsigned int) 1 << 8) // Pin Controlled by PB8 +#define AT91C_PB8_TD1 ((unsigned int) AT91C_PIO_PB8) // SSC Transmit Data 1 +#define AT91C_PB8_TIOA4 ((unsigned int) AT91C_PIO_PB8) // Timer Counter 4 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PB9 ((unsigned int) 1 << 9) // Pin Controlled by PB9 +#define AT91C_PB9_RD1 ((unsigned int) AT91C_PIO_PB9) // SSC Receive Data 1 +#define AT91C_PB9_TIOB4 ((unsigned int) AT91C_PIO_PB9) // Timer Counter 4 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PC0 ((unsigned int) 1 << 0) // Pin Controlled by PC0 +#define AT91C_PC0_BFCK ((unsigned int) AT91C_PIO_PC0) // Burst Flash Clock +#define AT91C_PIO_PC1 ((unsigned int) 1 << 1) // Pin Controlled by PC1 +#define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) // Burst Flash Ready +#define AT91C_PIO_PC10 ((unsigned int) 1 << 10) // Pin Controlled by PC10 +#define AT91C_PC10_NCS4_CFCS ((unsigned int) AT91C_PIO_PC10) // Compact Flash Chip Select +#define AT91C_PIO_PC11 ((unsigned int) 1 << 11) // Pin Controlled by PC11 +#define AT91C_PC11_NCS5_CFCE1 ((unsigned int) AT91C_PIO_PC11) // Chip Select 5 / Compact Flash Chip Enable 1 +#define AT91C_PIO_PC12 ((unsigned int) 1 << 12) // Pin Controlled by PC12 +#define AT91C_PC12_NCS6_CFCE2 ((unsigned int) AT91C_PIO_PC12) // Chip Select 6 / Compact Flash Chip Enable 2 +#define AT91C_PIO_PC13 ((unsigned int) 1 << 13) // Pin Controlled by PC13 +#define AT91C_PC13_NCS7 ((unsigned int) AT91C_PIO_PC13) // Chip Select 7 +#define AT91C_PIO_PC14 ((unsigned int) 1 << 14) // Pin Controlled by PC14 +#define AT91C_PIO_PC15 ((unsigned int) 1 << 15) // Pin Controlled by PC15 +#define AT91C_PIO_PC16 ((unsigned int) 1 << 16) // Pin Controlled by PC16 +#define AT91C_PC16_D16 ((unsigned int) AT91C_PIO_PC16) // Data Bus [16] +#define AT91C_PIO_PC17 ((unsigned int) 1 << 17) // Pin Controlled by PC17 +#define AT91C_PC17_D17 ((unsigned int) AT91C_PIO_PC17) // Data Bus [17] +#define AT91C_PIO_PC18 ((unsigned int) 1 << 18) // Pin Controlled by PC18 +#define AT91C_PC18_D18 ((unsigned int) AT91C_PIO_PC18) // Data Bus [18] +#define AT91C_PIO_PC19 ((unsigned int) 1 << 19) // Pin Controlled by PC19 +#define AT91C_PC19_D19 ((unsigned int) AT91C_PIO_PC19) // Data Bus [19] +#define AT91C_PIO_PC2 ((unsigned int) 1 << 2) // Pin Controlled by PC2 +#define AT91C_PC2_BFAVD ((unsigned int) AT91C_PIO_PC2) // Burst Flash Address Valid +#define AT91C_PIO_PC20 ((unsigned int) 1 << 20) // Pin Controlled by PC20 +#define AT91C_PC20_D20 ((unsigned int) AT91C_PIO_PC20) // Data Bus [20] +#define AT91C_PIO_PC21 ((unsigned int) 1 << 21) // Pin Controlled by PC21 +#define AT91C_PC21_D21 ((unsigned int) AT91C_PIO_PC21) // Data Bus [21] +#define AT91C_PIO_PC22 ((unsigned int) 1 << 22) // Pin Controlled by PC22 +#define AT91C_PC22_D22 ((unsigned int) AT91C_PIO_PC22) // Data Bus [22] +#define AT91C_PIO_PC23 ((unsigned int) 1 << 23) // Pin Controlled by PC23 +#define AT91C_PC23_D23 ((unsigned int) AT91C_PIO_PC23) // Data Bus [23] +#define AT91C_PIO_PC24 ((unsigned int) 1 << 24) // Pin Controlled by PC24 +#define AT91C_PC24_D24 ((unsigned int) AT91C_PIO_PC24) // Data Bus [24] +#define AT91C_PIO_PC25 ((unsigned int) 1 << 25) // Pin Controlled by PC25 +#define AT91C_PC25_D25 ((unsigned int) AT91C_PIO_PC25) // Data Bus [25] +#define AT91C_PIO_PC26 ((unsigned int) 1 << 26) // Pin Controlled by PC26 +#define AT91C_PC26_D26 ((unsigned int) AT91C_PIO_PC26) // Data Bus [26] +#define AT91C_PIO_PC27 ((unsigned int) 1 << 27) // Pin Controlled by PC27 +#define AT91C_PC27_D27 ((unsigned int) AT91C_PIO_PC27) // Data Bus [27] +#define AT91C_PIO_PC28 ((unsigned int) 1 << 28) // Pin Controlled by PC28 +#define AT91C_PC28_D28 ((unsigned int) AT91C_PIO_PC28) // Data Bus [28] +#define AT91C_PIO_PC29 ((unsigned int) 1 << 29) // Pin Controlled by PC29 +#define AT91C_PC29_D29 ((unsigned int) AT91C_PIO_PC29) // Data Bus [29] +#define AT91C_PIO_PC3 ((unsigned int) 1 << 3) // Pin Controlled by PC3 +#define AT91C_PC3_BFBAA_SMWE ((unsigned int) AT91C_PIO_PC3) // Burst Flash Address Advance / SmartMedia Write Enable +#define AT91C_PIO_PC30 ((unsigned int) 1 << 30) // Pin Controlled by PC30 +#define AT91C_PC30_D30 ((unsigned int) AT91C_PIO_PC30) // Data Bus [30] +#define AT91C_PIO_PC31 ((unsigned int) 1 << 31) // Pin Controlled by PC31 +#define AT91C_PC31_D31 ((unsigned int) AT91C_PIO_PC31) // Data Bus [31] +#define AT91C_PIO_PC4 ((unsigned int) 1 << 4) // Pin Controlled by PC4 +#define AT91C_PC4_BFOE ((unsigned int) AT91C_PIO_PC4) // Burst Flash Output Enable +#define AT91C_PIO_PC5 ((unsigned int) 1 << 5) // Pin Controlled by PC5 +#define AT91C_PC5_BFWE ((unsigned int) AT91C_PIO_PC5) // Burst Flash Write Enable +#define AT91C_PIO_PC6 ((unsigned int) 1 << 6) // Pin Controlled by PC6 +#define AT91C_PC6_NWAIT ((unsigned int) AT91C_PIO_PC6) // NWAIT +#define AT91C_PIO_PC7 ((unsigned int) 1 << 7) // Pin Controlled by PC7 +#define AT91C_PC7_A23 ((unsigned int) AT91C_PIO_PC7) // Address Bus[23] +#define AT91C_PIO_PC8 ((unsigned int) 1 << 8) // Pin Controlled by PC8 +#define AT91C_PC8_A24 ((unsigned int) AT91C_PIO_PC8) // Address Bus[24] +#define AT91C_PIO_PC9 ((unsigned int) 1 << 9) // Pin Controlled by PC9 +#define AT91C_PC9_A25_CFRNW ((unsigned int) AT91C_PIO_PC9) // Address Bus[25] / Compact Flash Read Not Write +#define AT91C_PIO_PD0 ((unsigned int) 1 << 0) // Pin Controlled by PD0 +#define AT91C_PD0_ETX0 ((unsigned int) AT91C_PIO_PD0) // Ethernet MAC Transmit Data 0 +#define AT91C_PIO_PD1 ((unsigned int) 1 << 1) // Pin Controlled by PD1 +#define AT91C_PD1_ETX1 ((unsigned int) AT91C_PIO_PD1) // Ethernet MAC Transmit Data 1 +#define AT91C_PIO_PD10 ((unsigned int) 1 << 10) // Pin Controlled by PD10 +#define AT91C_PD10_PCK3 ((unsigned int) AT91C_PIO_PD10) // PMC Programmable Clock Output 3 +#define AT91C_PD10_TPS1 ((unsigned int) AT91C_PIO_PD10) // ETM ARM9 pipeline status 1 +#define AT91C_PIO_PD11 ((unsigned int) 1 << 11) // Pin Controlled by PD11 +#define AT91C_PD11_ ((unsigned int) AT91C_PIO_PD11) // +#define AT91C_PD11_TPS2 ((unsigned int) AT91C_PIO_PD11) // ETM ARM9 pipeline status 2 +#define AT91C_PIO_PD12 ((unsigned int) 1 << 12) // Pin Controlled by PD12 +#define AT91C_PD12_ ((unsigned int) AT91C_PIO_PD12) // +#define AT91C_PD12_TPK0 ((unsigned int) AT91C_PIO_PD12) // ETM Trace Packet 0 +#define AT91C_PIO_PD13 ((unsigned int) 1 << 13) // Pin Controlled by PD13 +#define AT91C_PD13_ ((unsigned int) AT91C_PIO_PD13) // +#define AT91C_PD13_TPK1 ((unsigned int) AT91C_PIO_PD13) // ETM Trace Packet 1 +#define AT91C_PIO_PD14 ((unsigned int) 1 << 14) // Pin Controlled by PD14 +#define AT91C_PD14_ ((unsigned int) AT91C_PIO_PD14) // +#define AT91C_PD14_TPK2 ((unsigned int) AT91C_PIO_PD14) // ETM Trace Packet 2 +#define AT91C_PIO_PD15 ((unsigned int) 1 << 15) // Pin Controlled by PD15 +#define AT91C_PD15_TD0 ((unsigned int) AT91C_PIO_PD15) // SSC Transmit data +#define AT91C_PD15_TPK3 ((unsigned int) AT91C_PIO_PD15) // ETM Trace Packet 3 +#define AT91C_PIO_PD16 ((unsigned int) 1 << 16) // Pin Controlled by PD16 +#define AT91C_PD16_TD1 ((unsigned int) AT91C_PIO_PD16) // SSC Transmit Data 1 +#define AT91C_PD16_TPK4 ((unsigned int) AT91C_PIO_PD16) // ETM Trace Packet 4 +#define AT91C_PIO_PD17 ((unsigned int) 1 << 17) // Pin Controlled by PD17 +#define AT91C_PD17_TD2 ((unsigned int) AT91C_PIO_PD17) // SSC Transmit Data 2 +#define AT91C_PD17_TPK5 ((unsigned int) AT91C_PIO_PD17) // ETM Trace Packet 5 +#define AT91C_PIO_PD18 ((unsigned int) 1 << 18) // Pin Controlled by PD18 +#define AT91C_PD18_NPCS1 ((unsigned int) AT91C_PIO_PD18) // SPI Peripheral Chip Select 1 +#define AT91C_PD18_TPK6 ((unsigned int) AT91C_PIO_PD18) // ETM Trace Packet 6 +#define AT91C_PIO_PD19 ((unsigned int) 1 << 19) // Pin Controlled by PD19 +#define AT91C_PD19_NPCS2 ((unsigned int) AT91C_PIO_PD19) // SPI Peripheral Chip Select 2 +#define AT91C_PD19_TPK7 ((unsigned int) AT91C_PIO_PD19) // ETM Trace Packet 7 +#define AT91C_PIO_PD2 ((unsigned int) 1 << 2) // Pin Controlled by PD2 +#define AT91C_PD2_ETX2 ((unsigned int) AT91C_PIO_PD2) // Ethernet MAC Transmit Data 2 +#define AT91C_PIO_PD20 ((unsigned int) 1 << 20) // Pin Controlled by PD20 +#define AT91C_PD20_NPCS3 ((unsigned int) AT91C_PIO_PD20) // SPI Peripheral Chip Select 3 +#define AT91C_PD20_TPK8 ((unsigned int) AT91C_PIO_PD20) // ETM Trace Packet 8 +#define AT91C_PIO_PD21 ((unsigned int) 1 << 21) // Pin Controlled by PD21 +#define AT91C_PD21_RTS0 ((unsigned int) AT91C_PIO_PD21) // Usart 0 Ready To Send +#define AT91C_PD21_TPK9 ((unsigned int) AT91C_PIO_PD21) // ETM Trace Packet 9 +#define AT91C_PIO_PD22 ((unsigned int) 1 << 22) // Pin Controlled by PD22 +#define AT91C_PD22_RTS1 ((unsigned int) AT91C_PIO_PD22) // Usart 0 Ready To Send +#define AT91C_PD22_TPK10 ((unsigned int) AT91C_PIO_PD22) // ETM Trace Packet 10 +#define AT91C_PIO_PD23 ((unsigned int) 1 << 23) // Pin Controlled by PD23 +#define AT91C_PD23_RTS2 ((unsigned int) AT91C_PIO_PD23) // USART 2 Ready To Send +#define AT91C_PD23_TPK11 ((unsigned int) AT91C_PIO_PD23) // ETM Trace Packet 11 +#define AT91C_PIO_PD24 ((unsigned int) 1 << 24) // Pin Controlled by PD24 +#define AT91C_PD24_RTS3 ((unsigned int) AT91C_PIO_PD24) // USART 3 Ready To Send +#define AT91C_PD24_TPK12 ((unsigned int) AT91C_PIO_PD24) // ETM Trace Packet 12 +#define AT91C_PIO_PD25 ((unsigned int) 1 << 25) // Pin Controlled by PD25 +#define AT91C_PD25_DTR1 ((unsigned int) AT91C_PIO_PD25) // USART 1 Data Terminal ready +#define AT91C_PD25_TPK13 ((unsigned int) AT91C_PIO_PD25) // ETM Trace Packet 13 +#define AT91C_PIO_PD26 ((unsigned int) 1 << 26) // Pin Controlled by PD26 +#define AT91C_PD26_TPK14 ((unsigned int) AT91C_PIO_PD26) // ETM Trace Packet 14 +#define AT91C_PIO_PD27 ((unsigned int) 1 << 27) // Pin Controlled by PD27 +#define AT91C_PD27_TPK15 ((unsigned int) AT91C_PIO_PD27) // ETM Trace Packet 15 +#define AT91C_PIO_PD3 ((unsigned int) 1 << 3) // Pin Controlled by PD3 +#define AT91C_PD3_ETX3 ((unsigned int) AT91C_PIO_PD3) // Ethernet MAC Transmit Data 3 +#define AT91C_PIO_PD4 ((unsigned int) 1 << 4) // Pin Controlled by PD4 +#define AT91C_PD4_ETXEN ((unsigned int) AT91C_PIO_PD4) // Ethernet MAC Transmit Enable +#define AT91C_PIO_PD5 ((unsigned int) 1 << 5) // Pin Controlled by PD5 +#define AT91C_PD5_ETXER ((unsigned int) AT91C_PIO_PD5) // Ethernet MAC Transmikt Coding Error +#define AT91C_PIO_PD6 ((unsigned int) 1 << 6) // Pin Controlled by PD6 +#define AT91C_PD6_DTXD ((unsigned int) AT91C_PIO_PD6) // DBGU Debug Transmit Data +#define AT91C_PIO_PD7 ((unsigned int) 1 << 7) // Pin Controlled by PD7 +#define AT91C_PD7_PCK0 ((unsigned int) AT91C_PIO_PD7) // PMC Programmable Clock Output 0 +#define AT91C_PD7_TSYNC ((unsigned int) AT91C_PIO_PD7) // ETM Synchronization signal +#define AT91C_PIO_PD8 ((unsigned int) 1 << 8) // Pin Controlled by PD8 +#define AT91C_PD8_PCK1 ((unsigned int) AT91C_PIO_PD8) // PMC Programmable Clock Output 1 +#define AT91C_PD8_TCLK ((unsigned int) AT91C_PIO_PD8) // ETM Trace Clock signal +#define AT91C_PIO_PD9 ((unsigned int) 1 << 9) // Pin Controlled by PD9 +#define AT91C_PD9_PCK2 ((unsigned int) AT91C_PIO_PD9) // PMC Programmable Clock 2 +#define AT91C_PD9_TPS0 ((unsigned int) AT91C_PIO_PD9) // ETM ARM9 pipeline status 0 + +// ***************************************************************************** +// PERIPHERAL ID DEFINITIONS FOR AT91RM9200 +// ***************************************************************************** +#define AT91C_ID_FIQ ((unsigned int) 0) // Advanced Interrupt Controller (FIQ) +#define AT91C_ID_SYS ((unsigned int) 1) // System Peripheral +#define AT91C_ID_PIOA ((unsigned int) 2) // Parallel IO Controller A +#define AT91C_ID_PIOB ((unsigned int) 3) // Parallel IO Controller B +#define AT91C_ID_PIOC ((unsigned int) 4) // Parallel IO Controller C +#define AT91C_ID_PIOD ((unsigned int) 5) // Parallel IO Controller D +#define AT91C_ID_US0 ((unsigned int) 6) // USART 0 +#define AT91C_ID_US1 ((unsigned int) 7) // USART 1 +#define AT91C_ID_US2 ((unsigned int) 8) // USART 2 +#define AT91C_ID_US3 ((unsigned int) 9) // USART 3 +#define AT91C_ID_MCI ((unsigned int) 10) // Multimedia Card Interface +#define AT91C_ID_UDP ((unsigned int) 11) // USB Device Port +#define AT91C_ID_TWI ((unsigned int) 12) // Two-Wire Interface +#define AT91C_ID_SPI ((unsigned int) 13) // Serial Peripheral Interface +#define AT91C_ID_SSC0 ((unsigned int) 14) // Serial Synchronous Controller 0 +#define AT91C_ID_SSC1 ((unsigned int) 15) // Serial Synchronous Controller 1 +#define AT91C_ID_SSC2 ((unsigned int) 16) // Serial Synchronous Controller 2 +#define AT91C_ID_TC0 ((unsigned int) 17) // Timer Counter 0 +#define AT91C_ID_TC1 ((unsigned int) 18) // Timer Counter 1 +#define AT91C_ID_TC2 ((unsigned int) 19) // Timer Counter 2 +#define AT91C_ID_TC3 ((unsigned int) 20) // Timer Counter 3 +#define AT91C_ID_TC4 ((unsigned int) 21) // Timer Counter 4 +#define AT91C_ID_TC5 ((unsigned int) 22) // Timer Counter 5 +#define AT91C_ID_UHP ((unsigned int) 23) // USB Host port +#define AT91C_ID_EMAC ((unsigned int) 24) // Ethernet MAC +#define AT91C_ID_IRQ0 ((unsigned int) 25) // Advanced Interrupt Controller (IRQ0) +#define AT91C_ID_IRQ1 ((unsigned int) 26) // Advanced Interrupt Controller (IRQ1) +#define AT91C_ID_IRQ2 ((unsigned int) 27) // Advanced Interrupt Controller (IRQ2) +#define AT91C_ID_IRQ3 ((unsigned int) 28) // Advanced Interrupt Controller (IRQ3) +#define AT91C_ID_IRQ4 ((unsigned int) 29) // Advanced Interrupt Controller (IRQ4) +#define AT91C_ID_IRQ5 ((unsigned int) 30) // Advanced Interrupt Controller (IRQ5) +#define AT91C_ID_IRQ6 ((unsigned int) 31) // Advanced Interrupt Controller (IRQ6) + +// ***************************************************************************** +// BASE ADDRESS DEFINITIONS FOR AT91RM9200 +// ***************************************************************************** +#define AT91C_BASE_SYS ((AT91PS_SYS) 0xFFFFF000) // (SYS) Base Address +#define AT91C_BASE_MC ((AT91PS_MC) 0xFFFFFF00) // (MC) Base Address +#define AT91C_BASE_RTC ((AT91PS_RTC) 0xFFFFFE00) // (RTC) Base Address +#define AT91C_BASE_ST ((AT91PS_ST) 0xFFFFFD00) // (ST) Base Address +#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) // (PMC) Base Address +#define AT91C_BASE_CKGR ((AT91PS_CKGR) 0xFFFFFC20) // (CKGR) Base Address +#define AT91C_BASE_PIOD ((AT91PS_PIO) 0xFFFFFA00) // (PIOD) Base Address +#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) // (PIOC) Base Address +#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) // (PIOB) Base Address +#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) // (PIOA) Base Address +#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) // (DBGU) Base Address +#define AT91C_BASE_PDC_DBGU ((AT91PS_PDC) 0xFFFFF300) // (PDC_DBGU) Base Address +#define AT91C_BASE_AIC ((AT91PS_AIC) 0xFFFFF000) // (AIC) Base Address +#define AT91C_BASE_PDC_SPI ((AT91PS_PDC) 0xFFFE0100) // (PDC_SPI) Base Address +#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) // (SPI) Base Address +#define AT91C_BASE_PDC_SSC2 ((AT91PS_PDC) 0xFFFD8100) // (PDC_SSC2) Base Address +#define AT91C_BASE_SSC2 ((AT91PS_SSC) 0xFFFD8000) // (SSC2) Base Address +#define AT91C_BASE_PDC_SSC1 ((AT91PS_PDC) 0xFFFD4100) // (PDC_SSC1) Base Address +#define AT91C_BASE_SSC1 ((AT91PS_SSC) 0xFFFD4000) // (SSC1) Base Address +#define AT91C_BASE_PDC_SSC0 ((AT91PS_PDC) 0xFFFD0100) // (PDC_SSC0) Base Address +#define AT91C_BASE_SSC0 ((AT91PS_SSC) 0xFFFD0000) // (SSC0) Base Address +#define AT91C_BASE_PDC_US3 ((AT91PS_PDC) 0xFFFCC100) // (PDC_US3) Base Address +#define AT91C_BASE_US3 ((AT91PS_USART) 0xFFFCC000) // (US3) Base Address +#define AT91C_BASE_PDC_US2 ((AT91PS_PDC) 0xFFFC8100) // (PDC_US2) Base Address +#define AT91C_BASE_US2 ((AT91PS_USART) 0xFFFC8000) // (US2) Base Address +#define AT91C_BASE_PDC_US1 ((AT91PS_PDC) 0xFFFC4100) // (PDC_US1) Base Address +#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) // (US1) Base Address +#define AT91C_BASE_PDC_US0 ((AT91PS_PDC) 0xFFFC0100) // (PDC_US0) Base Address +#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) // (US0) Base Address +#define AT91C_BASE_TWI ((AT91PS_TWI) 0xFFFB8000) // (TWI) Base Address +#define AT91C_BASE_PDC_MCI ((AT91PS_PDC) 0xFFFB4100) // (PDC_MCI) Base Address +#define AT91C_BASE_MCI ((AT91PS_MCI) 0xFFFB4000) // (MCI) Base Address +#define AT91C_BASE_UDP ((AT91PS_UDP) 0xFFFB0000) // (UDP) Base Address +#define AT91C_BASE_TC5 ((AT91PS_TC) 0xFFFA4080) // (TC5) Base Address +#define AT91C_BASE_TC4 ((AT91PS_TC) 0xFFFA4040) // (TC4) Base Address +#define AT91C_BASE_TC3 ((AT91PS_TC) 0xFFFA4000) // (TC3) Base Address +#define AT91C_BASE_TCB1 ((AT91PS_TCB) 0xFFFA4080) // (TCB1) Base Address +#define AT91C_BASE_TC2 ((AT91PS_TC) 0xFFFA0080) // (TC2) Base Address +#define AT91C_BASE_TC1 ((AT91PS_TC) 0xFFFA0040) // (TC1) Base Address +#define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) // (TC0) Base Address +#define AT91C_BASE_TCB0 ((AT91PS_TCB) 0xFFFA0000) // (TCB0) Base Address +#define AT91C_BASE_UHP ((AT91PS_UHP) 0x00300000) // (UHP) Base Address +#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) // (EMAC) Base Address +#define AT91C_BASE_EBI ((AT91PS_EBI) 0xFFFFFF60) // (EBI) Base Address +#define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) // (SMC2) Base Address +#define AT91C_BASE_SDRC ((AT91PS_SDRC) 0xFFFFFF90) // (SDRC) Base Address +#define AT91C_BASE_BFC ((AT91PS_BFC) 0xFFFFFFC0) // (BFC) Base Address + +// ***************************************************************************** +// MEMORY MAPPING DEFINITIONS FOR AT91RM9200 +// ***************************************************************************** +#define AT91C_ISRAM ((char *) 0x00200000) // Internal SRAM base address +#define AT91C_ISRAM_SIZE ((unsigned int) 0x00004000) // Internal SRAM size in byte (16 Kbyte) +#define AT91C_IROM ((char *) 0x00100000) // Internal ROM base address +#define AT91C_IROM_SIZE ((unsigned int) 0x00020000) // Internal ROM size in byte (128 Kbyte) + +#endif diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc b/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc new file mode 100644 index 0000000..670e023 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc @@ -0,0 +1,2437 @@ +;- ---------------------------------------------------------------------------- +;- ATMEL Microcontroller Software Support - ROUSSET - +;- ---------------------------------------------------------------------------- +;- The software is delivered "AS IS" without warranty or condition of any +;- kind, either express, implied or statutory. This includes without +;- limitation any warranty or condition with respect to merchantability or +;- fitness for any particular purpose, or against the infringements of +;- intellectual property rights of others. +;- ---------------------------------------------------------------------------- +;- File Name : AT91RM9200.h +;- Object : AT91RM9200 definitions +;- Generated : AT91 SW Application Group 11/19/2003 (17:20:51) +;- +;- CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// +;- CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// +;- CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// +;- CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// +;- CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// +;- CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// +;- CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// +;- CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// +;- CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// +;- CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// +;- CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// +;- CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// +;- CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// +;- CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// +;- CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// +;- CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// +;- CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// +;- CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// +;- CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// +;- CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// +;- CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// +;- CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// +;- CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// +;- ---------------------------------------------------------------------------- + +;- Hardware register definition + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR System Peripherals +;- ***************************************************************************** + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Memory Controller Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_MC +MC_RCR # 4 ;- MC Remap Control Register +MC_ASR # 4 ;- MC Abort Status Register +MC_AASR # 4 ;- MC Abort Address Status Register + # 4 ;- Reserved +MC_PUIA # 64 ;- MC Protection Unit Area +MC_PUP # 4 ;- MC Protection Unit Peripherals +MC_PUER # 4 ;- MC Protection Unit Enable Register +;- -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- +AT91C_MC_RCB EQU (0x1:SHL:0) ;- (MC) Remap Command Bit +;- -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- +AT91C_MC_UNDADD EQU (0x1:SHL:0) ;- (MC) Undefined Addess Abort Status +AT91C_MC_MISADD EQU (0x1:SHL:1) ;- (MC) Misaligned Addess Abort Status +AT91C_MC_MPU EQU (0x1:SHL:2) ;- (MC) Memory protection Unit Abort Status +AT91C_MC_ABTSZ EQU (0x3:SHL:8) ;- (MC) Abort Size Status +AT91C_MC_ABTSZ_BYTE EQU (0x0:SHL:8) ;- (MC) Byte +AT91C_MC_ABTSZ_HWORD EQU (0x1:SHL:8) ;- (MC) Half-word +AT91C_MC_ABTSZ_WORD EQU (0x2:SHL:8) ;- (MC) Word +AT91C_MC_ABTTYP EQU (0x3:SHL:10) ;- (MC) Abort Type Status +AT91C_MC_ABTTYP_DATAR EQU (0x0:SHL:10) ;- (MC) Data Read +AT91C_MC_ABTTYP_DATAW EQU (0x1:SHL:10) ;- (MC) Data Write +AT91C_MC_ABTTYP_FETCH EQU (0x2:SHL:10) ;- (MC) Code Fetch +AT91C_MC_MST0 EQU (0x1:SHL:16) ;- (MC) Master 0 Abort Source +AT91C_MC_MST1 EQU (0x1:SHL:17) ;- (MC) Master 1 Abort Source +AT91C_MC_SVMST0 EQU (0x1:SHL:24) ;- (MC) Saved Master 0 Abort Source +AT91C_MC_SVMST1 EQU (0x1:SHL:25) ;- (MC) Saved Master 1 Abort Source +;- -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- +AT91C_MC_PROT EQU (0x3:SHL:0) ;- (MC) Protection +AT91C_MC_PROT_PNAUNA EQU (0x0) ;- (MC) Privilege: No Access, User: No Access +AT91C_MC_PROT_PRWUNA EQU (0x1) ;- (MC) Privilege: Read/Write, User: No Access +AT91C_MC_PROT_PRWURO EQU (0x2) ;- (MC) Privilege: Read/Write, User: Read Only +AT91C_MC_PROT_PRWURW EQU (0x3) ;- (MC) Privilege: Read/Write, User: Read/Write +AT91C_MC_SIZE EQU (0xF:SHL:4) ;- (MC) Internal Area Size +AT91C_MC_SIZE_1KB EQU (0x0:SHL:4) ;- (MC) Area size 1KByte +AT91C_MC_SIZE_2KB EQU (0x1:SHL:4) ;- (MC) Area size 2KByte +AT91C_MC_SIZE_4KB EQU (0x2:SHL:4) ;- (MC) Area size 4KByte +AT91C_MC_SIZE_8KB EQU (0x3:SHL:4) ;- (MC) Area size 8KByte +AT91C_MC_SIZE_16KB EQU (0x4:SHL:4) ;- (MC) Area size 16KByte +AT91C_MC_SIZE_32KB EQU (0x5:SHL:4) ;- (MC) Area size 32KByte +AT91C_MC_SIZE_64KB EQU (0x6:SHL:4) ;- (MC) Area size 64KByte +AT91C_MC_SIZE_128KB EQU (0x7:SHL:4) ;- (MC) Area size 128KByte +AT91C_MC_SIZE_256KB EQU (0x8:SHL:4) ;- (MC) Area size 256KByte +AT91C_MC_SIZE_512KB EQU (0x9:SHL:4) ;- (MC) Area size 512KByte +AT91C_MC_SIZE_1MB EQU (0xA:SHL:4) ;- (MC) Area size 1MByte +AT91C_MC_SIZE_2MB EQU (0xB:SHL:4) ;- (MC) Area size 2MByte +AT91C_MC_SIZE_4MB EQU (0xC:SHL:4) ;- (MC) Area size 4MByte +AT91C_MC_SIZE_8MB EQU (0xD:SHL:4) ;- (MC) Area size 8MByte +AT91C_MC_SIZE_16MB EQU (0xE:SHL:4) ;- (MC) Area size 16MByte +AT91C_MC_SIZE_64MB EQU (0xF:SHL:4) ;- (MC) Area size 64MByte +AT91C_MC_BA EQU (0x3FFFF:SHL:10) ;- (MC) Internal Area Base Address +;- -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- +;- -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- +AT91C_MC_PUEB EQU (0x1:SHL:0) ;- (MC) Protection Unit enable Bit + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_RTC +RTC_CR # 4 ;- Control Register +RTC_MR # 4 ;- Mode Register +RTC_TIMR # 4 ;- Time Register +RTC_CALR # 4 ;- Calendar Register +RTC_TIMALR # 4 ;- Time Alarm Register +RTC_CALALR # 4 ;- Calendar Alarm Register +RTC_SR # 4 ;- Status Register +RTC_SCCR # 4 ;- Status Clear Command Register +RTC_IER # 4 ;- Interrupt Enable Register +RTC_IDR # 4 ;- Interrupt Disable Register +RTC_IMR # 4 ;- Interrupt Mask Register +RTC_VER # 4 ;- Valid Entry Register +;- -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- +AT91C_RTC_UPDTIM EQU (0x1:SHL:0) ;- (RTC) Update Request Time Register +AT91C_RTC_UPDCAL EQU (0x1:SHL:1) ;- (RTC) Update Request Calendar Register +AT91C_RTC_TIMEVSEL EQU (0x3:SHL:8) ;- (RTC) Time Event Selection +AT91C_RTC_TIMEVSEL_MINUTE EQU (0x0:SHL:8) ;- (RTC) Minute change. +AT91C_RTC_TIMEVSEL_HOUR EQU (0x1:SHL:8) ;- (RTC) Hour change. +AT91C_RTC_TIMEVSEL_DAY24 EQU (0x2:SHL:8) ;- (RTC) Every day at midnight. +AT91C_RTC_TIMEVSEL_DAY12 EQU (0x3:SHL:8) ;- (RTC) Every day at noon. +AT91C_RTC_CALEVSEL EQU (0x3:SHL:16) ;- (RTC) Calendar Event Selection +AT91C_RTC_CALEVSEL_WEEK EQU (0x0:SHL:16) ;- (RTC) Week change (every Monday at time 00:00:00). +AT91C_RTC_CALEVSEL_MONTH EQU (0x1:SHL:16) ;- (RTC) Month change (every 01 of each month at time 00:00:00). +AT91C_RTC_CALEVSEL_YEAR EQU (0x2:SHL:16) ;- (RTC) Year change (every January 1 at time 00:00:00). +;- -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- +AT91C_RTC_HRMOD EQU (0x1:SHL:0) ;- (RTC) 12-24 hour Mode +;- -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- +AT91C_RTC_SEC EQU (0x7F:SHL:0) ;- (RTC) Current Second +AT91C_RTC_MIN EQU (0x7F:SHL:8) ;- (RTC) Current Minute +AT91C_RTC_HOUR EQU (0x1F:SHL:16) ;- (RTC) Current Hour +AT91C_RTC_AMPM EQU (0x1:SHL:22) ;- (RTC) Ante Meridiem, Post Meridiem Indicator +;- -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- +AT91C_RTC_CENT EQU (0x3F:SHL:0) ;- (RTC) Current Century +AT91C_RTC_YEAR EQU (0xFF:SHL:8) ;- (RTC) Current Year +AT91C_RTC_MONTH EQU (0x1F:SHL:16) ;- (RTC) Current Month +AT91C_RTC_DAY EQU (0x7:SHL:21) ;- (RTC) Current Day +AT91C_RTC_DATE EQU (0x3F:SHL:24) ;- (RTC) Current Date +;- -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- +AT91C_RTC_SECEN EQU (0x1:SHL:7) ;- (RTC) Second Alarm Enable +AT91C_RTC_MINEN EQU (0x1:SHL:15) ;- (RTC) Minute Alarm +AT91C_RTC_HOUREN EQU (0x1:SHL:23) ;- (RTC) Current Hour +;- -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- +AT91C_RTC_MONTHEN EQU (0x1:SHL:23) ;- (RTC) Month Alarm Enable +AT91C_RTC_DATEEN EQU (0x1:SHL:31) ;- (RTC) Date Alarm Enable +;- -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- +AT91C_RTC_ACKUPD EQU (0x1:SHL:0) ;- (RTC) Acknowledge for Update +AT91C_RTC_ALARM EQU (0x1:SHL:1) ;- (RTC) Alarm Flag +AT91C_RTC_SECEV EQU (0x1:SHL:2) ;- (RTC) Second Event +AT91C_RTC_TIMEV EQU (0x1:SHL:3) ;- (RTC) Time Event +AT91C_RTC_CALEV EQU (0x1:SHL:4) ;- (RTC) Calendar event +;- -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- +;- -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- +;- -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- +;- -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- +;- -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- +AT91C_RTC_NVTIM EQU (0x1:SHL:0) ;- (RTC) Non valid Time +AT91C_RTC_NVCAL EQU (0x1:SHL:1) ;- (RTC) Non valid Calendar +AT91C_RTC_NVTIMALR EQU (0x1:SHL:2) ;- (RTC) Non valid time Alarm +AT91C_RTC_NVCALALR EQU (0x1:SHL:3) ;- (RTC) Nonvalid Calendar Alarm + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR System Timer Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_ST +ST_CR # 4 ;- Control Register +ST_PIMR # 4 ;- Period Interval Mode Register +ST_WDMR # 4 ;- Watchdog Mode Register +ST_RTMR # 4 ;- Real-time Mode Register +ST_SR # 4 ;- Status Register +ST_IER # 4 ;- Interrupt Enable Register +ST_IDR # 4 ;- Interrupt Disable Register +ST_IMR # 4 ;- Interrupt Mask Register +ST_RTAR # 4 ;- Real-time Alarm Register +ST_CRTR # 4 ;- Current Real-time Register +;- -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- +AT91C_ST_WDRST EQU (0x1:SHL:0) ;- (ST) Watchdog Timer Restart +;- -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- +AT91C_ST_PIV EQU (0xFFFF:SHL:0) ;- (ST) Watchdog Timer Restart +;- -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- +AT91C_ST_WDV EQU (0xFFFF:SHL:0) ;- (ST) Watchdog Timer Restart +AT91C_ST_RSTEN EQU (0x1:SHL:16) ;- (ST) Reset Enable +AT91C_ST_EXTEN EQU (0x1:SHL:17) ;- (ST) External Signal Assertion Enable +;- -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- +AT91C_ST_RTPRES EQU (0xFFFF:SHL:0) ;- (ST) Real-time Timer Prescaler Value +;- -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- +AT91C_ST_PITS EQU (0x1:SHL:0) ;- (ST) Period Interval Timer Interrupt +AT91C_ST_WDOVF EQU (0x1:SHL:1) ;- (ST) Watchdog Overflow +AT91C_ST_RTTINC EQU (0x1:SHL:2) ;- (ST) Real-time Timer Increment +AT91C_ST_ALMS EQU (0x1:SHL:3) ;- (ST) Alarm Status +;- -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- +;- -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- +;- -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- +;- -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- +AT91C_ST_ALMV EQU (0xFFFFF:SHL:0) ;- (ST) Alarm Value Value +;- -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- +AT91C_ST_CRTV EQU (0xFFFFF:SHL:0) ;- (ST) Current Real-time Value + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Power Management Controler +;- ***************************************************************************** + ^ 0 ;- AT91S_PMC +PMC_SCER # 4 ;- System Clock Enable Register +PMC_SCDR # 4 ;- System Clock Disable Register +PMC_SCSR # 4 ;- System Clock Status Register + # 4 ;- Reserved +PMC_PCER # 4 ;- Peripheral Clock Enable Register +PMC_PCDR # 4 ;- Peripheral Clock Disable Register +PMC_PCSR # 4 ;- Peripheral Clock Status Register + # 20 ;- Reserved +PMC_MCKR # 4 ;- Master Clock Register + # 12 ;- Reserved +PMC_PCKR # 32 ;- Programmable Clock Register +PMC_IER # 4 ;- Interrupt Enable Register +PMC_IDR # 4 ;- Interrupt Disable Register +PMC_SR # 4 ;- Status Register +PMC_IMR # 4 ;- Interrupt Mask Register +;- -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- +AT91C_PMC_PCK EQU (0x1:SHL:0) ;- (PMC) Processor Clock +AT91C_PMC_UDP EQU (0x1:SHL:1) ;- (PMC) USB Device Port Clock +AT91C_PMC_MCKUDP EQU (0x1:SHL:2) ;- (PMC) USB Device Port Master Clock Automatic Disable on Suspend +AT91C_PMC_UHP EQU (0x1:SHL:4) ;- (PMC) USB Host Port Clock +AT91C_PMC_PCK0 EQU (0x1:SHL:8) ;- (PMC) Programmable Clock Output +AT91C_PMC_PCK1 EQU (0x1:SHL:9) ;- (PMC) Programmable Clock Output +AT91C_PMC_PCK2 EQU (0x1:SHL:10) ;- (PMC) Programmable Clock Output +AT91C_PMC_PCK3 EQU (0x1:SHL:11) ;- (PMC) Programmable Clock Output +AT91C_PMC_PCK4 EQU (0x1:SHL:12) ;- (PMC) Programmable Clock Output +AT91C_PMC_PCK5 EQU (0x1:SHL:13) ;- (PMC) Programmable Clock Output +AT91C_PMC_PCK6 EQU (0x1:SHL:14) ;- (PMC) Programmable Clock Output +AT91C_PMC_PCK7 EQU (0x1:SHL:15) ;- (PMC) Programmable Clock Output +;- -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- +;- -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- +;- -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- +AT91C_PMC_CSS EQU (0x3:SHL:0) ;- (PMC) Programmable Clock Selection +AT91C_PMC_CSS_SLOW_CLK EQU (0x0) ;- (PMC) Slow Clock is selected +AT91C_PMC_CSS_MAIN_CLK EQU (0x1) ;- (PMC) Main Clock is selected +AT91C_PMC_CSS_PLLA_CLK EQU (0x2) ;- (PMC) Clock from PLL A is selected +AT91C_PMC_CSS_PLLB_CLK EQU (0x3) ;- (PMC) Clock from PLL B is selected +AT91C_PMC_PRES EQU (0x7:SHL:2) ;- (PMC) Programmable Clock Prescaler +AT91C_PMC_PRES_CLK EQU (0x0:SHL:2) ;- (PMC) Selected clock +AT91C_PMC_PRES_CLK_2 EQU (0x1:SHL:2) ;- (PMC) Selected clock divided by 2 +AT91C_PMC_PRES_CLK_4 EQU (0x2:SHL:2) ;- (PMC) Selected clock divided by 4 +AT91C_PMC_PRES_CLK_8 EQU (0x3:SHL:2) ;- (PMC) Selected clock divided by 8 +AT91C_PMC_PRES_CLK_16 EQU (0x4:SHL:2) ;- (PMC) Selected clock divided by 16 +AT91C_PMC_PRES_CLK_32 EQU (0x5:SHL:2) ;- (PMC) Selected clock divided by 32 +AT91C_PMC_PRES_CLK_64 EQU (0x6:SHL:2) ;- (PMC) Selected clock divided by 64 +AT91C_PMC_MDIV EQU (0x3:SHL:8) ;- (PMC) Master Clock Division +AT91C_PMC_MDIV_1 EQU (0x0:SHL:8) ;- (PMC) The master clock and the processor clock are the same +AT91C_PMC_MDIV_2 EQU (0x1:SHL:8) ;- (PMC) The processor clock is twice as fast as the master clock +AT91C_PMC_MDIV_3 EQU (0x2:SHL:8) ;- (PMC) The processor clock is three times faster than the master clock +AT91C_PMC_MDIV_4 EQU (0x3:SHL:8) ;- (PMC) The processor clock is four times faster than the master clock +;- -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- +;- -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- +AT91C_PMC_MOSCS EQU (0x1:SHL:0) ;- (PMC) MOSC Status/Enable/Disable/Mask +AT91C_PMC_LOCKA EQU (0x1:SHL:1) ;- (PMC) PLL A Status/Enable/Disable/Mask +AT91C_PMC_LOCKB EQU (0x1:SHL:2) ;- (PMC) PLL B Status/Enable/Disable/Mask +AT91C_PMC_MCKRDY EQU (0x1:SHL:3) ;- (PMC) MCK_RDY Status/Enable/Disable/Mask +AT91C_PMC_PCK0RDY EQU (0x1:SHL:8) ;- (PMC) PCK0_RDY Status/Enable/Disable/Mask +AT91C_PMC_PCK1RDY EQU (0x1:SHL:9) ;- (PMC) PCK1_RDY Status/Enable/Disable/Mask +AT91C_PMC_PCK2RDY EQU (0x1:SHL:10) ;- (PMC) PCK2_RDY Status/Enable/Disable/Mask +AT91C_PMC_PCK3RDY EQU (0x1:SHL:11) ;- (PMC) PCK3_RDY Status/Enable/Disable/Mask +AT91C_PMC_PCK4RDY EQU (0x1:SHL:12) ;- (PMC) PCK4_RDY Status/Enable/Disable/Mask +AT91C_PMC_PCK5RDY EQU (0x1:SHL:13) ;- (PMC) PCK5_RDY Status/Enable/Disable/Mask +AT91C_PMC_PCK6RDY EQU (0x1:SHL:14) ;- (PMC) PCK6_RDY Status/Enable/Disable/Mask +AT91C_PMC_PCK7RDY EQU (0x1:SHL:15) ;- (PMC) PCK7_RDY Status/Enable/Disable/Mask +;- -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- +;- -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- +;- -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Clock Generator Controler +;- ***************************************************************************** + ^ 0 ;- AT91S_CKGR +CKGR_MOR # 4 ;- Main Oscillator Register +CKGR_MCFR # 4 ;- Main Clock Frequency Register +CKGR_PLLAR # 4 ;- PLL A Register +CKGR_PLLBR # 4 ;- PLL B Register +;- -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- +AT91C_CKGR_MOSCEN EQU (0x1:SHL:0) ;- (CKGR) Main Oscillator Enable +AT91C_CKGR_OSCTEST EQU (0x1:SHL:1) ;- (CKGR) Oscillator Test +AT91C_CKGR_OSCOUNT EQU (0xFF:SHL:8) ;- (CKGR) Main Oscillator Start-up Time +;- -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- +AT91C_CKGR_MAINF EQU (0xFFFF:SHL:0) ;- (CKGR) Main Clock Frequency +AT91C_CKGR_MAINRDY EQU (0x1:SHL:16) ;- (CKGR) Main Clock Ready +;- -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- +AT91C_CKGR_DIVA EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected +AT91C_CKGR_DIVA_0 EQU (0x0) ;- (CKGR) Divider output is 0 +AT91C_CKGR_DIVA_BYPASS EQU (0x1) ;- (CKGR) Divider is bypassed +AT91C_CKGR_PLLACOUNT EQU (0x3F:SHL:8) ;- (CKGR) PLL A Counter +AT91C_CKGR_OUTA EQU (0x3:SHL:14) ;- (CKGR) PLL A Output Frequency Range +AT91C_CKGR_OUTA_0 EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet +AT91C_CKGR_OUTA_1 EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet +AT91C_CKGR_OUTA_2 EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet +AT91C_CKGR_OUTA_3 EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet +AT91C_CKGR_MULA EQU (0x7FF:SHL:16) ;- (CKGR) PLL A Multiplier +AT91C_CKGR_SRCA EQU (0x1:SHL:29) ;- (CKGR) PLL A Source +;- -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- +AT91C_CKGR_DIVB EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected +AT91C_CKGR_DIVB_0 EQU (0x0) ;- (CKGR) Divider output is 0 +AT91C_CKGR_DIVB_BYPASS EQU (0x1) ;- (CKGR) Divider is bypassed +AT91C_CKGR_PLLBCOUNT EQU (0x3F:SHL:8) ;- (CKGR) PLL B Counter +AT91C_CKGR_OUTB EQU (0x3:SHL:14) ;- (CKGR) PLL B Output Frequency Range +AT91C_CKGR_OUTB_0 EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet +AT91C_CKGR_OUTB_1 EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet +AT91C_CKGR_OUTB_2 EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet +AT91C_CKGR_OUTB_3 EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet +AT91C_CKGR_MULB EQU (0x7FF:SHL:16) ;- (CKGR) PLL B Multiplier +AT91C_CKGR_USB_96M EQU (0x1:SHL:28) ;- (CKGR) Divider for USB Ports +AT91C_CKGR_USB_PLL EQU (0x1:SHL:29) ;- (CKGR) PLL Use + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Parallel Input Output Controler +;- ***************************************************************************** + ^ 0 ;- AT91S_PIO +PIO_PER # 4 ;- PIO Enable Register +PIO_PDR # 4 ;- PIO Disable Register +PIO_PSR # 4 ;- PIO Status Register + # 4 ;- Reserved +PIO_OER # 4 ;- Output Enable Register +PIO_ODR # 4 ;- Output Disable Registerr +PIO_OSR # 4 ;- Output Status Register + # 4 ;- Reserved +PIO_IFER # 4 ;- Input Filter Enable Register +PIO_IFDR # 4 ;- Input Filter Disable Register +PIO_IFSR # 4 ;- Input Filter Status Register + # 4 ;- Reserved +PIO_SODR # 4 ;- Set Output Data Register +PIO_CODR # 4 ;- Clear Output Data Register +PIO_ODSR # 4 ;- Output Data Status Register +PIO_PDSR # 4 ;- Pin Data Status Register +PIO_IER # 4 ;- Interrupt Enable Register +PIO_IDR # 4 ;- Interrupt Disable Register +PIO_IMR # 4 ;- Interrupt Mask Register +PIO_ISR # 4 ;- Interrupt Status Register +PIO_MDER # 4 ;- Multi-driver Enable Register +PIO_MDDR # 4 ;- Multi-driver Disable Register +PIO_MDSR # 4 ;- Multi-driver Status Register + # 4 ;- Reserved +PIO_PPUDR # 4 ;- Pull-up Disable Register +PIO_PPUER # 4 ;- Pull-up Enable Register +PIO_PPUSR # 4 ;- Pad Pull-up Status Register + # 4 ;- Reserved +PIO_ASR # 4 ;- Select A Register +PIO_BSR # 4 ;- Select B Register +PIO_ABSR # 4 ;- AB Select Status Register + # 36 ;- Reserved +PIO_OWER # 4 ;- Output Write Enable Register +PIO_OWDR # 4 ;- Output Write Disable Register +PIO_OWSR # 4 ;- Output Write Status Register + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Debug Unit +;- ***************************************************************************** + ^ 0 ;- AT91S_DBGU +DBGU_CR # 4 ;- Control Register +DBGU_MR # 4 ;- Mode Register +DBGU_IER # 4 ;- Interrupt Enable Register +DBGU_IDR # 4 ;- Interrupt Disable Register +DBGU_IMR # 4 ;- Interrupt Mask Register +DBGU_CSR # 4 ;- Channel Status Register +DBGU_RHR # 4 ;- Receiver Holding Register +DBGU_THR # 4 ;- Transmitter Holding Register +DBGU_BRGR # 4 ;- Baud Rate Generator Register + # 28 ;- Reserved +DBGU_C1R # 4 ;- Chip ID1 Register +DBGU_C2R # 4 ;- Chip ID2 Register +DBGU_FNTR # 4 ;- Force NTRST Register + # 180 ;- Reserved +DBGU_RPR # 4 ;- Receive Pointer Register +DBGU_RCR # 4 ;- Receive Counter Register +DBGU_TPR # 4 ;- Transmit Pointer Register +DBGU_TCR # 4 ;- Transmit Counter Register +DBGU_RNPR # 4 ;- Receive Next Pointer Register +DBGU_RNCR # 4 ;- Receive Next Counter Register +DBGU_TNPR # 4 ;- Transmit Next Pointer Register +DBGU_TNCR # 4 ;- Transmit Next Counter Register +DBGU_PTCR # 4 ;- PDC Transfer Control Register +DBGU_PTSR # 4 ;- PDC Transfer Status Register +;- -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- +AT91C_US_RSTRX EQU (0x1:SHL:2) ;- (DBGU) Reset Receiver +AT91C_US_RSTTX EQU (0x1:SHL:3) ;- (DBGU) Reset Transmitter +AT91C_US_RXEN EQU (0x1:SHL:4) ;- (DBGU) Receiver Enable +AT91C_US_RXDIS EQU (0x1:SHL:5) ;- (DBGU) Receiver Disable +AT91C_US_TXEN EQU (0x1:SHL:6) ;- (DBGU) Transmitter Enable +AT91C_US_TXDIS EQU (0x1:SHL:7) ;- (DBGU) Transmitter Disable +;- -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- +AT91C_US_PAR EQU (0x7:SHL:9) ;- (DBGU) Parity type +AT91C_US_PAR_EVEN EQU (0x0:SHL:9) ;- (DBGU) Even Parity +AT91C_US_PAR_ODD EQU (0x1:SHL:9) ;- (DBGU) Odd Parity +AT91C_US_PAR_SPACE EQU (0x2:SHL:9) ;- (DBGU) Parity forced to 0 (Space) +AT91C_US_PAR_MARK EQU (0x3:SHL:9) ;- (DBGU) Parity forced to 1 (Mark) +AT91C_US_PAR_NONE EQU (0x4:SHL:9) ;- (DBGU) No Parity +AT91C_US_PAR_MULTI_DROP EQU (0x6:SHL:9) ;- (DBGU) Multi-drop mode +AT91C_US_CHMODE EQU (0x3:SHL:14) ;- (DBGU) Channel Mode +AT91C_US_CHMODE_NORMAL EQU (0x0:SHL:14) ;- (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. +AT91C_US_CHMODE_AUTO EQU (0x1:SHL:14) ;- (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. +AT91C_US_CHMODE_LOCAL EQU (0x2:SHL:14) ;- (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. +AT91C_US_CHMODE_REMOTE EQU (0x3:SHL:14) ;- (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. +;- -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- +AT91C_US_RXRDY EQU (0x1:SHL:0) ;- (DBGU) RXRDY Interrupt +AT91C_US_TXRDY EQU (0x1:SHL:1) ;- (DBGU) TXRDY Interrupt +AT91C_US_ENDRX EQU (0x1:SHL:3) ;- (DBGU) End of Receive Transfer Interrupt +AT91C_US_ENDTX EQU (0x1:SHL:4) ;- (DBGU) End of Transmit Interrupt +AT91C_US_OVRE EQU (0x1:SHL:5) ;- (DBGU) Overrun Interrupt +AT91C_US_FRAME EQU (0x1:SHL:6) ;- (DBGU) Framing Error Interrupt +AT91C_US_PARE EQU (0x1:SHL:7) ;- (DBGU) Parity Error Interrupt +AT91C_US_TXEMPTY EQU (0x1:SHL:9) ;- (DBGU) TXEMPTY Interrupt +AT91C_US_TXBUFE EQU (0x1:SHL:11) ;- (DBGU) TXBUFE Interrupt +AT91C_US_RXBUFF EQU (0x1:SHL:12) ;- (DBGU) RXBUFF Interrupt +AT91C_US_COMM_TX EQU (0x1:SHL:30) ;- (DBGU) COMM_TX Interrupt +AT91C_US_COMM_RX EQU (0x1:SHL:31) ;- (DBGU) COMM_RX Interrupt +;- -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- +;- -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- +;- -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- +;- -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- +AT91C_US_FORCE_NTRST EQU (0x1:SHL:0) ;- (DBGU) Force NTRST in JTAG + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Peripheral Data Controller +;- ***************************************************************************** + ^ 0 ;- AT91S_PDC +PDC_RPR # 4 ;- Receive Pointer Register +PDC_RCR # 4 ;- Receive Counter Register +PDC_TPR # 4 ;- Transmit Pointer Register +PDC_TCR # 4 ;- Transmit Counter Register +PDC_RNPR # 4 ;- Receive Next Pointer Register +PDC_RNCR # 4 ;- Receive Next Counter Register +PDC_TNPR # 4 ;- Transmit Next Pointer Register +PDC_TNCR # 4 ;- Transmit Next Counter Register +PDC_PTCR # 4 ;- PDC Transfer Control Register +PDC_PTSR # 4 ;- PDC Transfer Status Register +;- -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- +AT91C_PDC_RXTEN EQU (0x1:SHL:0) ;- (PDC) Receiver Transfer Enable +AT91C_PDC_RXTDIS EQU (0x1:SHL:1) ;- (PDC) Receiver Transfer Disable +AT91C_PDC_TXTEN EQU (0x1:SHL:8) ;- (PDC) Transmitter Transfer Enable +AT91C_PDC_TXTDIS EQU (0x1:SHL:9) ;- (PDC) Transmitter Transfer Disable +;- -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Advanced Interrupt Controller +;- ***************************************************************************** + ^ 0 ;- AT91S_AIC +AIC_SMR # 128 ;- Source Mode Register +AIC_SVR # 128 ;- Source Vector Register +AIC_IVR # 4 ;- IRQ Vector Register +AIC_FVR # 4 ;- FIQ Vector Register +AIC_ISR # 4 ;- Interrupt Status Register +AIC_IPR # 4 ;- Interrupt Pending Register +AIC_IMR # 4 ;- Interrupt Mask Register +AIC_CISR # 4 ;- Core Interrupt Status Register + # 8 ;- Reserved +AIC_IECR # 4 ;- Interrupt Enable Command Register +AIC_IDCR # 4 ;- Interrupt Disable Command Register +AIC_ICCR # 4 ;- Interrupt Clear Command Register +AIC_ISCR # 4 ;- Interrupt Set Command Register +AIC_EOICR # 4 ;- End of Interrupt Command Register +AIC_SPU # 4 ;- Spurious Vector Register +AIC_DCR # 4 ;- Debug Control Register (Protect) + # 4 ;- Reserved +AIC_FFER # 4 ;- Fast Forcing Enable Register +AIC_FFDR # 4 ;- Fast Forcing Disable Register +AIC_FFSR # 4 ;- Fast Forcing Status Register +;- -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- +AT91C_AIC_PRIOR EQU (0x7:SHL:0) ;- (AIC) Priority Level +AT91C_AIC_PRIOR_LOWEST EQU (0x0) ;- (AIC) Lowest priority level +AT91C_AIC_PRIOR_HIGHEST EQU (0x7) ;- (AIC) Highest priority level +AT91C_AIC_SRCTYPE EQU (0x3:SHL:5) ;- (AIC) Interrupt Source Type +AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE EQU (0x0:SHL:5) ;- (AIC) Internal Sources Code Label Level Sensitive +AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED EQU (0x1:SHL:5) ;- (AIC) Internal Sources Code Label Edge triggered +AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL EQU (0x2:SHL:5) ;- (AIC) External Sources Code Label High-level Sensitive +AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE EQU (0x3:SHL:5) ;- (AIC) External Sources Code Label Positive Edge triggered +;- -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- +AT91C_AIC_NFIQ EQU (0x1:SHL:0) ;- (AIC) NFIQ Status +AT91C_AIC_NIRQ EQU (0x1:SHL:1) ;- (AIC) NIRQ Status +;- -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- +AT91C_AIC_DCR_PROT EQU (0x1:SHL:0) ;- (AIC) Protection Mode +AT91C_AIC_DCR_GMSK EQU (0x1:SHL:1) ;- (AIC) General Mask + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Serial Parallel Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_SPI +SPI_CR # 4 ;- Control Register +SPI_MR # 4 ;- Mode Register +SPI_RDR # 4 ;- Receive Data Register +SPI_TDR # 4 ;- Transmit Data Register +SPI_SR # 4 ;- Status Register +SPI_IER # 4 ;- Interrupt Enable Register +SPI_IDR # 4 ;- Interrupt Disable Register +SPI_IMR # 4 ;- Interrupt Mask Register + # 16 ;- Reserved +SPI_CSR # 16 ;- Chip Select Register + # 192 ;- Reserved +SPI_RPR # 4 ;- Receive Pointer Register +SPI_RCR # 4 ;- Receive Counter Register +SPI_TPR # 4 ;- Transmit Pointer Register +SPI_TCR # 4 ;- Transmit Counter Register +SPI_RNPR # 4 ;- Receive Next Pointer Register +SPI_RNCR # 4 ;- Receive Next Counter Register +SPI_TNPR # 4 ;- Transmit Next Pointer Register +SPI_TNCR # 4 ;- Transmit Next Counter Register +SPI_PTCR # 4 ;- PDC Transfer Control Register +SPI_PTSR # 4 ;- PDC Transfer Status Register +;- -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- +AT91C_SPI_SPIEN EQU (0x1:SHL:0) ;- (SPI) SPI Enable +AT91C_SPI_SPIDIS EQU (0x1:SHL:1) ;- (SPI) SPI Disable +AT91C_SPI_SWRST EQU (0x1:SHL:7) ;- (SPI) SPI Software reset +;- -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- +AT91C_SPI_MSTR EQU (0x1:SHL:0) ;- (SPI) Master/Slave Mode +AT91C_SPI_PS EQU (0x1:SHL:1) ;- (SPI) Peripheral Select +AT91C_SPI_PS_FIXED EQU (0x0:SHL:1) ;- (SPI) Fixed Peripheral Select +AT91C_SPI_PS_VARIABLE EQU (0x1:SHL:1) ;- (SPI) Variable Peripheral Select +AT91C_SPI_PCSDEC EQU (0x1:SHL:2) ;- (SPI) Chip Select Decode +AT91C_SPI_DIV32 EQU (0x1:SHL:3) ;- (SPI) Clock Selection +AT91C_SPI_MODFDIS EQU (0x1:SHL:4) ;- (SPI) Mode Fault Detection +AT91C_SPI_LLB EQU (0x1:SHL:7) ;- (SPI) Clock Selection +AT91C_SPI_PCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select +AT91C_SPI_DLYBCS EQU (0xFF:SHL:24) ;- (SPI) Delay Between Chip Selects +;- -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- +AT91C_SPI_RD EQU (0xFFFF:SHL:0) ;- (SPI) Receive Data +AT91C_SPI_RPCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status +;- -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- +AT91C_SPI_TD EQU (0xFFFF:SHL:0) ;- (SPI) Transmit Data +AT91C_SPI_TPCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status +;- -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- +AT91C_SPI_RDRF EQU (0x1:SHL:0) ;- (SPI) Receive Data Register Full +AT91C_SPI_TDRE EQU (0x1:SHL:1) ;- (SPI) Transmit Data Register Empty +AT91C_SPI_MODF EQU (0x1:SHL:2) ;- (SPI) Mode Fault Error +AT91C_SPI_OVRES EQU (0x1:SHL:3) ;- (SPI) Overrun Error Status +AT91C_SPI_SPENDRX EQU (0x1:SHL:4) ;- (SPI) End of Receiver Transfer +AT91C_SPI_SPENDTX EQU (0x1:SHL:5) ;- (SPI) End of Receiver Transfer +AT91C_SPI_RXBUFF EQU (0x1:SHL:6) ;- (SPI) RXBUFF Interrupt +AT91C_SPI_TXBUFE EQU (0x1:SHL:7) ;- (SPI) TXBUFE Interrupt +AT91C_SPI_SPIENS EQU (0x1:SHL:16) ;- (SPI) Enable Status +;- -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- +;- -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- +;- -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- +;- -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- +AT91C_SPI_CPOL EQU (0x1:SHL:0) ;- (SPI) Clock Polarity +AT91C_SPI_NCPHA EQU (0x1:SHL:1) ;- (SPI) Clock Phase +AT91C_SPI_BITS EQU (0xF:SHL:4) ;- (SPI) Bits Per Transfer +AT91C_SPI_BITS_8 EQU (0x0:SHL:4) ;- (SPI) 8 Bits Per transfer +AT91C_SPI_BITS_9 EQU (0x1:SHL:4) ;- (SPI) 9 Bits Per transfer +AT91C_SPI_BITS_10 EQU (0x2:SHL:4) ;- (SPI) 10 Bits Per transfer +AT91C_SPI_BITS_11 EQU (0x3:SHL:4) ;- (SPI) 11 Bits Per transfer +AT91C_SPI_BITS_12 EQU (0x4:SHL:4) ;- (SPI) 12 Bits Per transfer +AT91C_SPI_BITS_13 EQU (0x5:SHL:4) ;- (SPI) 13 Bits Per transfer +AT91C_SPI_BITS_14 EQU (0x6:SHL:4) ;- (SPI) 14 Bits Per transfer +AT91C_SPI_BITS_15 EQU (0x7:SHL:4) ;- (SPI) 15 Bits Per transfer +AT91C_SPI_BITS_16 EQU (0x8:SHL:4) ;- (SPI) 16 Bits Per transfer +AT91C_SPI_SCBR EQU (0xFF:SHL:8) ;- (SPI) Serial Clock Baud Rate +AT91C_SPI_DLYBS EQU (0xFF:SHL:16) ;- (SPI) Serial Clock Baud Rate +AT91C_SPI_DLYBCT EQU (0xFF:SHL:24) ;- (SPI) Delay Between Consecutive Transfers + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_SSC +SSC_CR # 4 ;- Control Register +SSC_CMR # 4 ;- Clock Mode Register + # 8 ;- Reserved +SSC_RCMR # 4 ;- Receive Clock ModeRegister +SSC_RFMR # 4 ;- Receive Frame Mode Register +SSC_TCMR # 4 ;- Transmit Clock Mode Register +SSC_TFMR # 4 ;- Transmit Frame Mode Register +SSC_RHR # 4 ;- Receive Holding Register +SSC_THR # 4 ;- Transmit Holding Register + # 8 ;- Reserved +SSC_RSHR # 4 ;- Receive Sync Holding Register +SSC_TSHR # 4 ;- Transmit Sync Holding Register +SSC_RC0R # 4 ;- Receive Compare 0 Register +SSC_RC1R # 4 ;- Receive Compare 1 Register +SSC_SR # 4 ;- Status Register +SSC_IER # 4 ;- Interrupt Enable Register +SSC_IDR # 4 ;- Interrupt Disable Register +SSC_IMR # 4 ;- Interrupt Mask Register + # 176 ;- Reserved +SSC_RPR # 4 ;- Receive Pointer Register +SSC_RCR # 4 ;- Receive Counter Register +SSC_TPR # 4 ;- Transmit Pointer Register +SSC_TCR # 4 ;- Transmit Counter Register +SSC_RNPR # 4 ;- Receive Next Pointer Register +SSC_RNCR # 4 ;- Receive Next Counter Register +SSC_TNPR # 4 ;- Transmit Next Pointer Register +SSC_TNCR # 4 ;- Transmit Next Counter Register +SSC_PTCR # 4 ;- PDC Transfer Control Register +SSC_PTSR # 4 ;- PDC Transfer Status Register +;- -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- +AT91C_SSC_RXEN EQU (0x1:SHL:0) ;- (SSC) Receive Enable +AT91C_SSC_RXDIS EQU (0x1:SHL:1) ;- (SSC) Receive Disable +AT91C_SSC_TXEN EQU (0x1:SHL:8) ;- (SSC) Transmit Enable +AT91C_SSC_TXDIS EQU (0x1:SHL:9) ;- (SSC) Transmit Disable +AT91C_SSC_SWRST EQU (0x1:SHL:15) ;- (SSC) Software Reset +;- -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- +AT91C_SSC_CKS EQU (0x3:SHL:0) ;- (SSC) Receive/Transmit Clock Selection +AT91C_SSC_CKS_DIV EQU (0x0) ;- (SSC) Divided Clock +AT91C_SSC_CKS_TK EQU (0x1) ;- (SSC) TK Clock signal +AT91C_SSC_CKS_RK EQU (0x2) ;- (SSC) RK pin +AT91C_SSC_CKO EQU (0x7:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode Selection +AT91C_SSC_CKO_NONE EQU (0x0:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only +AT91C_SSC_CKO_CONTINOUS EQU (0x1:SHL:2) ;- (SSC) Continuous Receive/Transmit Clock RK pin: Output +AT91C_SSC_CKO_DATA_TX EQU (0x2:SHL:2) ;- (SSC) Receive/Transmit Clock only during data transfers RK pin: Output +AT91C_SSC_CKI EQU (0x1:SHL:5) ;- (SSC) Receive/Transmit Clock Inversion +AT91C_SSC_CKG EQU (0x3:SHL:6) ;- (SSC) Receive/Transmit Clock Gating Selection +AT91C_SSC_CKG_NONE EQU (0x0:SHL:6) ;- (SSC) Receive/Transmit Clock Gating: None, continuous clock +AT91C_SSC_CKG_LOW EQU (0x1:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF Low +AT91C_SSC_CKG_HIGH EQU (0x2:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF High +AT91C_SSC_START EQU (0xF:SHL:8) ;- (SSC) Receive/Transmit Start Selection +AT91C_SSC_START_CONTINOUS EQU (0x0:SHL:8) ;- (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. +AT91C_SSC_START_TX EQU (0x1:SHL:8) ;- (SSC) Transmit/Receive start +AT91C_SSC_START_LOW_RF EQU (0x2:SHL:8) ;- (SSC) Detection of a low level on RF input +AT91C_SSC_START_HIGH_RF EQU (0x3:SHL:8) ;- (SSC) Detection of a high level on RF input +AT91C_SSC_START_FALL_RF EQU (0x4:SHL:8) ;- (SSC) Detection of a falling edge on RF input +AT91C_SSC_START_RISE_RF EQU (0x5:SHL:8) ;- (SSC) Detection of a rising edge on RF input +AT91C_SSC_START_LEVEL_RF EQU (0x6:SHL:8) ;- (SSC) Detection of any level change on RF input +AT91C_SSC_START_EDGE_RF EQU (0x7:SHL:8) ;- (SSC) Detection of any edge on RF input +AT91C_SSC_START_0 EQU (0x8:SHL:8) ;- (SSC) Compare 0 +AT91C_SSC_STOP EQU (0x1:SHL:12) ;- (SSC) Receive Stop Selection +AT91C_SSC_STTOUT EQU (0x1:SHL:15) ;- (SSC) Receive/Transmit Start Output Selection +AT91C_SSC_STTDLY EQU (0xFF:SHL:16) ;- (SSC) Receive/Transmit Start Delay +AT91C_SSC_PERIOD EQU (0xFF:SHL:24) ;- (SSC) Receive/Transmit Period Divider Selection +;- -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- +AT91C_SSC_DATLEN EQU (0x1F:SHL:0) ;- (SSC) Data Length +AT91C_SSC_LOOP EQU (0x1:SHL:5) ;- (SSC) Loop Mode +AT91C_SSC_MSBF EQU (0x1:SHL:7) ;- (SSC) Most Significant Bit First +AT91C_SSC_DATNB EQU (0xF:SHL:8) ;- (SSC) Data Number per Frame +AT91C_SSC_FSLEN EQU (0xF:SHL:16) ;- (SSC) Receive/Transmit Frame Sync length +AT91C_SSC_FSOS EQU (0x7:SHL:20) ;- (SSC) Receive/Transmit Frame Sync Output Selection +AT91C_SSC_FSOS_NONE EQU (0x0:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only +AT91C_SSC_FSOS_NEGATIVE EQU (0x1:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse +AT91C_SSC_FSOS_POSITIVE EQU (0x2:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse +AT91C_SSC_FSOS_LOW EQU (0x3:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer +AT91C_SSC_FSOS_HIGH EQU (0x4:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer +AT91C_SSC_FSOS_TOGGLE EQU (0x5:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer +AT91C_SSC_FSEDGE EQU (0x1:SHL:24) ;- (SSC) Frame Sync Edge Detection +;- -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- +;- -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- +AT91C_SSC_DATDEF EQU (0x1:SHL:5) ;- (SSC) Data Default Value +AT91C_SSC_FSDEN EQU (0x1:SHL:23) ;- (SSC) Frame Sync Data Enable +;- -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- +AT91C_SSC_TXRDY EQU (0x1:SHL:0) ;- (SSC) Transmit Ready +AT91C_SSC_TXEMPTY EQU (0x1:SHL:1) ;- (SSC) Transmit Empty +AT91C_SSC_ENDTX EQU (0x1:SHL:2) ;- (SSC) End Of Transmission +AT91C_SSC_TXBUFE EQU (0x1:SHL:3) ;- (SSC) Transmit Buffer Empty +AT91C_SSC_RXRDY EQU (0x1:SHL:4) ;- (SSC) Receive Ready +AT91C_SSC_OVRUN EQU (0x1:SHL:5) ;- (SSC) Receive Overrun +AT91C_SSC_ENDRX EQU (0x1:SHL:6) ;- (SSC) End of Reception +AT91C_SSC_RXBUFF EQU (0x1:SHL:7) ;- (SSC) Receive Buffer Full +AT91C_SSC_CP0 EQU (0x1:SHL:8) ;- (SSC) Compare 0 +AT91C_SSC_CP1 EQU (0x1:SHL:9) ;- (SSC) Compare 1 +AT91C_SSC_TXSYN EQU (0x1:SHL:10) ;- (SSC) Transmit Sync +AT91C_SSC_RXSYN EQU (0x1:SHL:11) ;- (SSC) Receive Sync +AT91C_SSC_TXENA EQU (0x1:SHL:16) ;- (SSC) Transmit Enable +AT91C_SSC_RXENA EQU (0x1:SHL:17) ;- (SSC) Receive Enable +;- -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- +;- -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- +;- -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Usart +;- ***************************************************************************** + ^ 0 ;- AT91S_USART +US_CR # 4 ;- Control Register +US_MR # 4 ;- Mode Register +US_IER # 4 ;- Interrupt Enable Register +US_IDR # 4 ;- Interrupt Disable Register +US_IMR # 4 ;- Interrupt Mask Register +US_CSR # 4 ;- Channel Status Register +US_RHR # 4 ;- Receiver Holding Register +US_THR # 4 ;- Transmitter Holding Register +US_BRGR # 4 ;- Baud Rate Generator Register +US_RTOR # 4 ;- Receiver Time-out Register +US_TTGR # 4 ;- Transmitter Time-guard Register + # 20 ;- Reserved +US_FIDI # 4 ;- FI_DI_Ratio Register +US_NER # 4 ;- Nb Errors Register +US_XXR # 4 ;- XON_XOFF Register +US_IF # 4 ;- IRDA_FILTER Register + # 176 ;- Reserved +US_RPR # 4 ;- Receive Pointer Register +US_RCR # 4 ;- Receive Counter Register +US_TPR # 4 ;- Transmit Pointer Register +US_TCR # 4 ;- Transmit Counter Register +US_RNPR # 4 ;- Receive Next Pointer Register +US_RNCR # 4 ;- Receive Next Counter Register +US_TNPR # 4 ;- Transmit Next Pointer Register +US_TNCR # 4 ;- Transmit Next Counter Register +US_PTCR # 4 ;- PDC Transfer Control Register +US_PTSR # 4 ;- PDC Transfer Status Register +;- -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- +AT91C_US_RSTSTA EQU (0x1:SHL:8) ;- (USART) Reset Status Bits +AT91C_US_STTBRK EQU (0x1:SHL:9) ;- (USART) Start Break +AT91C_US_STPBRK EQU (0x1:SHL:10) ;- (USART) Stop Break +AT91C_US_STTTO EQU (0x1:SHL:11) ;- (USART) Start Time-out +AT91C_US_SENDA EQU (0x1:SHL:12) ;- (USART) Send Address +AT91C_US_RSTIT EQU (0x1:SHL:13) ;- (USART) Reset Iterations +AT91C_US_RSTNACK EQU (0x1:SHL:14) ;- (USART) Reset Non Acknowledge +AT91C_US_RETTO EQU (0x1:SHL:15) ;- (USART) Rearm Time-out +AT91C_US_DTREN EQU (0x1:SHL:16) ;- (USART) Data Terminal ready Enable +AT91C_US_DTRDIS EQU (0x1:SHL:17) ;- (USART) Data Terminal ready Disable +AT91C_US_RTSEN EQU (0x1:SHL:18) ;- (USART) Request to Send enable +AT91C_US_RTSDIS EQU (0x1:SHL:19) ;- (USART) Request to Send Disable +;- -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- +AT91C_US_USMODE EQU (0xF:SHL:0) ;- (USART) Usart mode +AT91C_US_USMODE_NORMAL EQU (0x0) ;- (USART) Normal +AT91C_US_USMODE_RS485 EQU (0x1) ;- (USART) RS485 +AT91C_US_USMODE_HWHSH EQU (0x2) ;- (USART) Hardware Handshaking +AT91C_US_USMODE_MODEM EQU (0x3) ;- (USART) Modem +AT91C_US_USMODE_ISO7816_0 EQU (0x4) ;- (USART) ISO7816 protocol: T = 0 +AT91C_US_USMODE_ISO7816_1 EQU (0x6) ;- (USART) ISO7816 protocol: T = 1 +AT91C_US_USMODE_IRDA EQU (0x8) ;- (USART) IrDA +AT91C_US_USMODE_SWHSH EQU (0xC) ;- (USART) Software Handshaking +AT91C_US_CLKS EQU (0x3:SHL:4) ;- (USART) Clock Selection (Baud Rate generator Input Clock +AT91C_US_CLKS_CLOCK EQU (0x0:SHL:4) ;- (USART) Clock +AT91C_US_CLKS_FDIV1 EQU (0x1:SHL:4) ;- (USART) fdiv1 +AT91C_US_CLKS_SLOW EQU (0x2:SHL:4) ;- (USART) slow_clock (ARM) +AT91C_US_CLKS_EXT EQU (0x3:SHL:4) ;- (USART) External (SCK) +AT91C_US_CHRL EQU (0x3:SHL:6) ;- (USART) Clock Selection (Baud Rate generator Input Clock +AT91C_US_CHRL_5_BITS EQU (0x0:SHL:6) ;- (USART) Character Length: 5 bits +AT91C_US_CHRL_6_BITS EQU (0x1:SHL:6) ;- (USART) Character Length: 6 bits +AT91C_US_CHRL_7_BITS EQU (0x2:SHL:6) ;- (USART) Character Length: 7 bits +AT91C_US_CHRL_8_BITS EQU (0x3:SHL:6) ;- (USART) Character Length: 8 bits +AT91C_US_SYNC EQU (0x1:SHL:8) ;- (USART) Synchronous Mode Select +AT91C_US_NBSTOP EQU (0x3:SHL:12) ;- (USART) Number of Stop bits +AT91C_US_NBSTOP_1_BIT EQU (0x0:SHL:12) ;- (USART) 1 stop bit +AT91C_US_NBSTOP_15_BIT EQU (0x1:SHL:12) ;- (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits +AT91C_US_NBSTOP_2_BIT EQU (0x2:SHL:12) ;- (USART) 2 stop bits +AT91C_US_MSBF EQU (0x1:SHL:16) ;- (USART) Bit Order +AT91C_US_MODE9 EQU (0x1:SHL:17) ;- (USART) 9-bit Character length +AT91C_US_CKLO EQU (0x1:SHL:18) ;- (USART) Clock Output Select +AT91C_US_OVER EQU (0x1:SHL:19) ;- (USART) Over Sampling Mode +AT91C_US_INACK EQU (0x1:SHL:20) ;- (USART) Inhibit Non Acknowledge +AT91C_US_DSNACK EQU (0x1:SHL:21) ;- (USART) Disable Successive NACK +AT91C_US_MAX_ITER EQU (0x1:SHL:24) ;- (USART) Number of Repetitions +AT91C_US_FILTER EQU (0x1:SHL:28) ;- (USART) Receive Line Filter +;- -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- +AT91C_US_RXBRK EQU (0x1:SHL:2) ;- (USART) Break Received/End of Break +AT91C_US_TIMEOUT EQU (0x1:SHL:8) ;- (USART) Receiver Time-out +AT91C_US_ITERATION EQU (0x1:SHL:10) ;- (USART) Max number of Repetitions Reached +AT91C_US_NACK EQU (0x1:SHL:13) ;- (USART) Non Acknowledge +AT91C_US_RIIC EQU (0x1:SHL:16) ;- (USART) Ring INdicator Input Change Flag +AT91C_US_DSRIC EQU (0x1:SHL:17) ;- (USART) Data Set Ready Input Change Flag +AT91C_US_DCDIC EQU (0x1:SHL:18) ;- (USART) Data Carrier Flag +AT91C_US_CTSIC EQU (0x1:SHL:19) ;- (USART) Clear To Send Input Change Flag +;- -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- +;- -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- +;- -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- +AT91C_US_RI EQU (0x1:SHL:20) ;- (USART) Image of RI Input +AT91C_US_DSR EQU (0x1:SHL:21) ;- (USART) Image of DSR Input +AT91C_US_DCD EQU (0x1:SHL:22) ;- (USART) Image of DCD Input +AT91C_US_CTS EQU (0x1:SHL:23) ;- (USART) Image of CTS Input + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Two-wire Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_TWI +TWI_CR # 4 ;- Control Register +TWI_MMR # 4 ;- Master Mode Register +TWI_SMR # 4 ;- Slave Mode Register +TWI_IADR # 4 ;- Internal Address Register +TWI_CWGR # 4 ;- Clock Waveform Generator Register + # 12 ;- Reserved +TWI_SR # 4 ;- Status Register +TWI_IER # 4 ;- Interrupt Enable Register +TWI_IDR # 4 ;- Interrupt Disable Register +TWI_IMR # 4 ;- Interrupt Mask Register +TWI_RHR # 4 ;- Receive Holding Register +TWI_THR # 4 ;- Transmit Holding Register +;- -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- +AT91C_TWI_START EQU (0x1:SHL:0) ;- (TWI) Send a START Condition +AT91C_TWI_STOP EQU (0x1:SHL:1) ;- (TWI) Send a STOP Condition +AT91C_TWI_MSEN EQU (0x1:SHL:2) ;- (TWI) TWI Master Transfer Enabled +AT91C_TWI_MSDIS EQU (0x1:SHL:3) ;- (TWI) TWI Master Transfer Disabled +AT91C_TWI_SVEN EQU (0x1:SHL:4) ;- (TWI) TWI Slave Transfer Enabled +AT91C_TWI_SVDIS EQU (0x1:SHL:5) ;- (TWI) TWI Slave Transfer Disabled +AT91C_TWI_SWRST EQU (0x1:SHL:7) ;- (TWI) Software Reset +;- -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- +AT91C_TWI_IADRSZ EQU (0x3:SHL:8) ;- (TWI) Internal Device Address Size +AT91C_TWI_IADRSZ_NO EQU (0x0:SHL:8) ;- (TWI) No internal device address +AT91C_TWI_IADRSZ_1_BYTE EQU (0x1:SHL:8) ;- (TWI) One-byte internal device address +AT91C_TWI_IADRSZ_2_BYTE EQU (0x2:SHL:8) ;- (TWI) Two-byte internal device address +AT91C_TWI_IADRSZ_3_BYTE EQU (0x3:SHL:8) ;- (TWI) Three-byte internal device address +AT91C_TWI_MREAD EQU (0x1:SHL:12) ;- (TWI) Master Read Direction +AT91C_TWI_DADR EQU (0x7F:SHL:16) ;- (TWI) Device Address +;- -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- +AT91C_TWI_SADR EQU (0x7F:SHL:16) ;- (TWI) Slave Device Address +;- -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- +AT91C_TWI_CLDIV EQU (0xFF:SHL:0) ;- (TWI) Clock Low Divider +AT91C_TWI_CHDIV EQU (0xFF:SHL:8) ;- (TWI) Clock High Divider +AT91C_TWI_CKDIV EQU (0x7:SHL:16) ;- (TWI) Clock Divider +;- -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- +AT91C_TWI_TXCOMP EQU (0x1:SHL:0) ;- (TWI) Transmission Completed +AT91C_TWI_RXRDY EQU (0x1:SHL:1) ;- (TWI) Receive holding register ReaDY +AT91C_TWI_TXRDY EQU (0x1:SHL:2) ;- (TWI) Transmit holding register ReaDY +AT91C_TWI_SVREAD EQU (0x1:SHL:3) ;- (TWI) Slave Read +AT91C_TWI_SVACC EQU (0x1:SHL:4) ;- (TWI) Slave Access +AT91C_TWI_GCACC EQU (0x1:SHL:5) ;- (TWI) General Call Access +AT91C_TWI_OVRE EQU (0x1:SHL:6) ;- (TWI) Overrun Error +AT91C_TWI_UNRE EQU (0x1:SHL:7) ;- (TWI) Underrun Error +AT91C_TWI_NACK EQU (0x1:SHL:8) ;- (TWI) Not Acknowledged +AT91C_TWI_ARBLST EQU (0x1:SHL:9) ;- (TWI) Arbitration Lost +;- -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- +;- -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- +;- -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Multimedia Card Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_MCI +MCI_CR # 4 ;- MCI Control Register +MCI_MR # 4 ;- MCI Mode Register +MCI_DTOR # 4 ;- MCI Data Timeout Register +MCI_SDCR # 4 ;- MCI SD Card Register +MCI_ARGR # 4 ;- MCI Argument Register +MCI_CMDR # 4 ;- MCI Command Register + # 8 ;- Reserved +MCI_RSPR # 16 ;- MCI Response Register +MCI_RDR # 4 ;- MCI Receive Data Register +MCI_TDR # 4 ;- MCI Transmit Data Register + # 8 ;- Reserved +MCI_SR # 4 ;- MCI Status Register +MCI_IER # 4 ;- MCI Interrupt Enable Register +MCI_IDR # 4 ;- MCI Interrupt Disable Register +MCI_IMR # 4 ;- MCI Interrupt Mask Register + # 176 ;- Reserved +MCI_RPR # 4 ;- Receive Pointer Register +MCI_RCR # 4 ;- Receive Counter Register +MCI_TPR # 4 ;- Transmit Pointer Register +MCI_TCR # 4 ;- Transmit Counter Register +MCI_RNPR # 4 ;- Receive Next Pointer Register +MCI_RNCR # 4 ;- Receive Next Counter Register +MCI_TNPR # 4 ;- Transmit Next Pointer Register +MCI_TNCR # 4 ;- Transmit Next Counter Register +MCI_PTCR # 4 ;- PDC Transfer Control Register +MCI_PTSR # 4 ;- PDC Transfer Status Register +;- -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- +AT91C_MCI_MCIEN EQU (0x1:SHL:0) ;- (MCI) Multimedia Interface Enable +AT91C_MCI_MCIDIS EQU (0x1:SHL:1) ;- (MCI) Multimedia Interface Disable +AT91C_MCI_PWSEN EQU (0x1:SHL:2) ;- (MCI) Power Save Mode Enable +AT91C_MCI_PWSDIS EQU (0x1:SHL:3) ;- (MCI) Power Save Mode Disable +;- -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- +AT91C_MCI_CLKDIV EQU (0x1:SHL:0) ;- (MCI) Clock Divider +AT91C_MCI_PWSDIV EQU (0x1:SHL:8) ;- (MCI) Power Saving Divider +AT91C_MCI_PDCPADV EQU (0x1:SHL:14) ;- (MCI) PDC Padding Value +AT91C_MCI_PDCMODE EQU (0x1:SHL:15) ;- (MCI) PDC Oriented Mode +AT91C_MCI_BLKLEN EQU (0x1:SHL:18) ;- (MCI) Data Block Length +;- -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- +AT91C_MCI_DTOCYC EQU (0x1:SHL:0) ;- (MCI) Data Timeout Cycle Number +AT91C_MCI_DTOMUL EQU (0x7:SHL:4) ;- (MCI) Data Timeout Multiplier +AT91C_MCI_DTOMUL_1 EQU (0x0:SHL:4) ;- (MCI) DTOCYC x 1 +AT91C_MCI_DTOMUL_16 EQU (0x1:SHL:4) ;- (MCI) DTOCYC x 16 +AT91C_MCI_DTOMUL_128 EQU (0x2:SHL:4) ;- (MCI) DTOCYC x 128 +AT91C_MCI_DTOMUL_256 EQU (0x3:SHL:4) ;- (MCI) DTOCYC x 256 +AT91C_MCI_DTOMUL_1024 EQU (0x4:SHL:4) ;- (MCI) DTOCYC x 1024 +AT91C_MCI_DTOMUL_4096 EQU (0x5:SHL:4) ;- (MCI) DTOCYC x 4096 +AT91C_MCI_DTOMUL_65536 EQU (0x6:SHL:4) ;- (MCI) DTOCYC x 65536 +AT91C_MCI_DTOMUL_1048576 EQU (0x7:SHL:4) ;- (MCI) DTOCYC x 1048576 +;- -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- +AT91C_MCI_SCDSEL EQU (0x1:SHL:0) ;- (MCI) SD Card Selector +AT91C_MCI_SCDBUS EQU (0x1:SHL:7) ;- (MCI) SD Card Bus Width +;- -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- +AT91C_MCI_CMDNB EQU (0x1F:SHL:0) ;- (MCI) Command Number +AT91C_MCI_RSPTYP EQU (0x3:SHL:6) ;- (MCI) Response Type +AT91C_MCI_RSPTYP_NO EQU (0x0:SHL:6) ;- (MCI) No response +AT91C_MCI_RSPTYP_48 EQU (0x1:SHL:6) ;- (MCI) 48-bit response +AT91C_MCI_RSPTYP_136 EQU (0x2:SHL:6) ;- (MCI) 136-bit response +AT91C_MCI_SPCMD EQU (0x7:SHL:8) ;- (MCI) Special CMD +AT91C_MCI_SPCMD_NONE EQU (0x0:SHL:8) ;- (MCI) Not a special CMD +AT91C_MCI_SPCMD_INIT EQU (0x1:SHL:8) ;- (MCI) Initialization CMD +AT91C_MCI_SPCMD_SYNC EQU (0x2:SHL:8) ;- (MCI) Synchronized CMD +AT91C_MCI_SPCMD_IT_CMD EQU (0x4:SHL:8) ;- (MCI) Interrupt command +AT91C_MCI_SPCMD_IT_REP EQU (0x5:SHL:8) ;- (MCI) Interrupt response +AT91C_MCI_OPDCMD EQU (0x1:SHL:11) ;- (MCI) Open Drain Command +AT91C_MCI_MAXLAT EQU (0x1:SHL:12) ;- (MCI) Maximum Latency for Command to respond +AT91C_MCI_TRCMD EQU (0x3:SHL:16) ;- (MCI) Transfer CMD +AT91C_MCI_TRCMD_NO EQU (0x0:SHL:16) ;- (MCI) No transfer +AT91C_MCI_TRCMD_START EQU (0x1:SHL:16) ;- (MCI) Start transfer +AT91C_MCI_TRCMD_STOP EQU (0x2:SHL:16) ;- (MCI) Stop transfer +AT91C_MCI_TRDIR EQU (0x1:SHL:18) ;- (MCI) Transfer Direction +AT91C_MCI_TRTYP EQU (0x3:SHL:19) ;- (MCI) Transfer Type +AT91C_MCI_TRTYP_BLOCK EQU (0x0:SHL:19) ;- (MCI) Block Transfer type +AT91C_MCI_TRTYP_MULTIPLE EQU (0x1:SHL:19) ;- (MCI) Multiple Block transfer type +AT91C_MCI_TRTYP_STREAM EQU (0x2:SHL:19) ;- (MCI) Stream transfer type +;- -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- +AT91C_MCI_CMDRDY EQU (0x1:SHL:0) ;- (MCI) Command Ready flag +AT91C_MCI_RXRDY EQU (0x1:SHL:1) ;- (MCI) RX Ready flag +AT91C_MCI_TXRDY EQU (0x1:SHL:2) ;- (MCI) TX Ready flag +AT91C_MCI_BLKE EQU (0x1:SHL:3) ;- (MCI) Data Block Transfer Ended flag +AT91C_MCI_DTIP EQU (0x1:SHL:4) ;- (MCI) Data Transfer in Progress flag +AT91C_MCI_NOTBUSY EQU (0x1:SHL:5) ;- (MCI) Data Line Not Busy flag +AT91C_MCI_ENDRX EQU (0x1:SHL:6) ;- (MCI) End of RX Buffer flag +AT91C_MCI_ENDTX EQU (0x1:SHL:7) ;- (MCI) End of TX Buffer flag +AT91C_MCI_RXBUFF EQU (0x1:SHL:14) ;- (MCI) RX Buffer Full flag +AT91C_MCI_TXBUFE EQU (0x1:SHL:15) ;- (MCI) TX Buffer Empty flag +AT91C_MCI_RINDE EQU (0x1:SHL:16) ;- (MCI) Response Index Error flag +AT91C_MCI_RDIRE EQU (0x1:SHL:17) ;- (MCI) Response Direction Error flag +AT91C_MCI_RCRCE EQU (0x1:SHL:18) ;- (MCI) Response CRC Error flag +AT91C_MCI_RENDE EQU (0x1:SHL:19) ;- (MCI) Response End Bit Error flag +AT91C_MCI_RTOE EQU (0x1:SHL:20) ;- (MCI) Response Time-out Error flag +AT91C_MCI_DCRCE EQU (0x1:SHL:21) ;- (MCI) data CRC Error flag +AT91C_MCI_DTOE EQU (0x1:SHL:22) ;- (MCI) Data timeout Error flag +AT91C_MCI_OVRE EQU (0x1:SHL:30) ;- (MCI) Overrun flag +AT91C_MCI_UNRE EQU (0x1:SHL:31) ;- (MCI) Underrun flag +;- -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- +;- -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- +;- -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR USB Device Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_UDP +UDP_NUM # 4 ;- Frame Number Register +UDP_GLBSTATE # 4 ;- Global State Register +UDP_FADDR # 4 ;- Function Address Register + # 4 ;- Reserved +UDP_IER # 4 ;- Interrupt Enable Register +UDP_IDR # 4 ;- Interrupt Disable Register +UDP_IMR # 4 ;- Interrupt Mask Register +UDP_ISR # 4 ;- Interrupt Status Register +UDP_ICR # 4 ;- Interrupt Clear Register + # 4 ;- Reserved +UDP_RSTEP # 4 ;- Reset Endpoint Register + # 4 ;- Reserved +UDP_CSR # 32 ;- Endpoint Control and Status Register +UDP_FDR # 32 ;- Endpoint FIFO Data Register +;- -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- +AT91C_UDP_FRM_NUM EQU (0x7FF:SHL:0) ;- (UDP) Frame Number as Defined in the Packet Field Formats +AT91C_UDP_FRM_ERR EQU (0x1:SHL:16) ;- (UDP) Frame Error +AT91C_UDP_FRM_OK EQU (0x1:SHL:17) ;- (UDP) Frame OK +;- -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- +AT91C_UDP_FADDEN EQU (0x1:SHL:0) ;- (UDP) Function Address Enable +AT91C_UDP_CONFG EQU (0x1:SHL:1) ;- (UDP) Configured +AT91C_UDP_RMWUPE EQU (0x1:SHL:2) ;- (UDP) Remote Wake Up Enable +AT91C_UDP_RSMINPR EQU (0x1:SHL:3) ;- (UDP) A Resume Has Been Sent to the Host +;- -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- +AT91C_UDP_FADD EQU (0xFF:SHL:0) ;- (UDP) Function Address Value +AT91C_UDP_FEN EQU (0x1:SHL:8) ;- (UDP) Function Enable +;- -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- +AT91C_UDP_EPINT0 EQU (0x1:SHL:0) ;- (UDP) Endpoint 0 Interrupt +AT91C_UDP_EPINT1 EQU (0x1:SHL:1) ;- (UDP) Endpoint 0 Interrupt +AT91C_UDP_EPINT2 EQU (0x1:SHL:2) ;- (UDP) Endpoint 2 Interrupt +AT91C_UDP_EPINT3 EQU (0x1:SHL:3) ;- (UDP) Endpoint 3 Interrupt +AT91C_UDP_EPINT4 EQU (0x1:SHL:4) ;- (UDP) Endpoint 4 Interrupt +AT91C_UDP_EPINT5 EQU (0x1:SHL:5) ;- (UDP) Endpoint 5 Interrupt +AT91C_UDP_EPINT6 EQU (0x1:SHL:6) ;- (UDP) Endpoint 6 Interrupt +AT91C_UDP_EPINT7 EQU (0x1:SHL:7) ;- (UDP) Endpoint 7 Interrupt +AT91C_UDP_RXSUSP EQU (0x1:SHL:8) ;- (UDP) USB Suspend Interrupt +AT91C_UDP_RXRSM EQU (0x1:SHL:9) ;- (UDP) USB Resume Interrupt +AT91C_UDP_EXTRSM EQU (0x1:SHL:10) ;- (UDP) USB External Resume Interrupt +AT91C_UDP_SOFINT EQU (0x1:SHL:11) ;- (UDP) USB Start Of frame Interrupt +AT91C_UDP_WAKEUP EQU (0x1:SHL:13) ;- (UDP) USB Resume Interrupt +;- -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- +;- -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- +;- -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- +AT91C_UDP_ENDBUSRES EQU (0x1:SHL:12) ;- (UDP) USB End Of Bus Reset Interrupt +;- -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- +;- -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- +AT91C_UDP_EP0 EQU (0x1:SHL:0) ;- (UDP) Reset Endpoint 0 +AT91C_UDP_EP1 EQU (0x1:SHL:1) ;- (UDP) Reset Endpoint 1 +AT91C_UDP_EP2 EQU (0x1:SHL:2) ;- (UDP) Reset Endpoint 2 +AT91C_UDP_EP3 EQU (0x1:SHL:3) ;- (UDP) Reset Endpoint 3 +AT91C_UDP_EP4 EQU (0x1:SHL:4) ;- (UDP) Reset Endpoint 4 +AT91C_UDP_EP5 EQU (0x1:SHL:5) ;- (UDP) Reset Endpoint 5 +AT91C_UDP_EP6 EQU (0x1:SHL:6) ;- (UDP) Reset Endpoint 6 +AT91C_UDP_EP7 EQU (0x1:SHL:7) ;- (UDP) Reset Endpoint 7 +;- -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- +AT91C_UDP_TXCOMP EQU (0x1:SHL:0) ;- (UDP) Generates an IN packet with data previously written in the DPR +AT91C_UDP_RX_DATA_BK0 EQU (0x1:SHL:1) ;- (UDP) Receive Data Bank 0 +AT91C_UDP_RXSETUP EQU (0x1:SHL:2) ;- (UDP) Sends STALL to the Host (Control endpoints) +AT91C_UDP_ISOERROR EQU (0x1:SHL:3) ;- (UDP) Isochronous error (Isochronous endpoints) +AT91C_UDP_TXPKTRDY EQU (0x1:SHL:4) ;- (UDP) Transmit Packet Ready +AT91C_UDP_FORCESTALL EQU (0x1:SHL:5) ;- (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). +AT91C_UDP_RX_DATA_BK1 EQU (0x1:SHL:6) ;- (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). +AT91C_UDP_DIR EQU (0x1:SHL:7) ;- (UDP) Transfer Direction +AT91C_UDP_EPTYPE EQU (0x7:SHL:8) ;- (UDP) Endpoint type +AT91C_UDP_EPTYPE_CTRL EQU (0x0:SHL:8) ;- (UDP) Control +AT91C_UDP_EPTYPE_ISO_OUT EQU (0x1:SHL:8) ;- (UDP) Isochronous OUT +AT91C_UDP_EPTYPE_BULK_OUT EQU (0x2:SHL:8) ;- (UDP) Bulk OUT +AT91C_UDP_EPTYPE_INT_OUT EQU (0x3:SHL:8) ;- (UDP) Interrupt OUT +AT91C_UDP_EPTYPE_ISO_IN EQU (0x5:SHL:8) ;- (UDP) Isochronous IN +AT91C_UDP_EPTYPE_BULK_IN EQU (0x6:SHL:8) ;- (UDP) Bulk IN +AT91C_UDP_EPTYPE_INT_IN EQU (0x7:SHL:8) ;- (UDP) Interrupt IN +AT91C_UDP_DTGLE EQU (0x1:SHL:11) ;- (UDP) Data Toggle +AT91C_UDP_EPEDS EQU (0x1:SHL:15) ;- (UDP) Endpoint Enable Disable +AT91C_UDP_RXBYTECNT EQU (0x7FF:SHL:16) ;- (UDP) Number Of Bytes Available in the FIFO + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Timer Counter Channel Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_TC +TC_CCR # 4 ;- Channel Control Register +TC_CMR # 4 ;- Channel Mode Register + # 8 ;- Reserved +TC_CV # 4 ;- Counter Value +TC_RA # 4 ;- Register A +TC_RB # 4 ;- Register B +TC_RC # 4 ;- Register C +TC_SR # 4 ;- Status Register +TC_IER # 4 ;- Interrupt Enable Register +TC_IDR # 4 ;- Interrupt Disable Register +TC_IMR # 4 ;- Interrupt Mask Register +;- -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- +AT91C_TC_CLKEN EQU (0x1:SHL:0) ;- (TC) Counter Clock Enable Command +AT91C_TC_CLKDIS EQU (0x1:SHL:1) ;- (TC) Counter Clock Disable Command +AT91C_TC_SWTRG EQU (0x1:SHL:2) ;- (TC) Software Trigger Command +;- -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- +AT91C_TC_CPCSTOP EQU (0x1:SHL:6) ;- (TC) Counter Clock Stopped with RC Compare +AT91C_TC_CPCDIS EQU (0x1:SHL:7) ;- (TC) Counter Clock Disable with RC Compare +AT91C_TC_EEVTEDG EQU (0x3:SHL:8) ;- (TC) External Event Edge Selection +AT91C_TC_EEVTEDG_NONE EQU (0x0:SHL:8) ;- (TC) Edge: None +AT91C_TC_EEVTEDG_RISING EQU (0x1:SHL:8) ;- (TC) Edge: rising edge +AT91C_TC_EEVTEDG_FALLING EQU (0x2:SHL:8) ;- (TC) Edge: falling edge +AT91C_TC_EEVTEDG_BOTH EQU (0x3:SHL:8) ;- (TC) Edge: each edge +AT91C_TC_EEVT EQU (0x3:SHL:10) ;- (TC) External Event Selection +AT91C_TC_EEVT_NONE EQU (0x0:SHL:10) ;- (TC) Signal selected as external event: TIOB TIOB direction: input +AT91C_TC_EEVT_RISING EQU (0x1:SHL:10) ;- (TC) Signal selected as external event: XC0 TIOB direction: output +AT91C_TC_EEVT_FALLING EQU (0x2:SHL:10) ;- (TC) Signal selected as external event: XC1 TIOB direction: output +AT91C_TC_EEVT_BOTH EQU (0x3:SHL:10) ;- (TC) Signal selected as external event: XC2 TIOB direction: output +AT91C_TC_ENETRG EQU (0x1:SHL:12) ;- (TC) External Event Trigger enable +AT91C_TC_WAVESEL EQU (0x3:SHL:13) ;- (TC) Waveform Selection +AT91C_TC_WAVESEL_UP EQU (0x0:SHL:13) ;- (TC) UP mode without atomatic trigger on RC Compare +AT91C_TC_WAVESEL_UPDOWN EQU (0x1:SHL:13) ;- (TC) UPDOWN mode without automatic trigger on RC Compare +AT91C_TC_WAVESEL_UP_AUTO EQU (0x2:SHL:13) ;- (TC) UP mode with automatic trigger on RC Compare +AT91C_TC_WAVESEL_UPDOWN_AUTO EQU (0x3:SHL:13) ;- (TC) UPDOWN mode with automatic trigger on RC Compare +AT91C_TC_CPCTRG EQU (0x1:SHL:14) ;- (TC) RC Compare Trigger Enable +AT91C_TC_WAVE EQU (0x1:SHL:15) ;- (TC) +AT91C_TC_ACPA EQU (0x3:SHL:16) ;- (TC) RA Compare Effect on TIOA +AT91C_TC_ACPA_NONE EQU (0x0:SHL:16) ;- (TC) Effect: none +AT91C_TC_ACPA_SET EQU (0x1:SHL:16) ;- (TC) Effect: set +AT91C_TC_ACPA_CLEAR EQU (0x2:SHL:16) ;- (TC) Effect: clear +AT91C_TC_ACPA_TOGGLE EQU (0x3:SHL:16) ;- (TC) Effect: toggle +AT91C_TC_ACPC EQU (0x3:SHL:18) ;- (TC) RC Compare Effect on TIOA +AT91C_TC_ACPC_NONE EQU (0x0:SHL:18) ;- (TC) Effect: none +AT91C_TC_ACPC_SET EQU (0x1:SHL:18) ;- (TC) Effect: set +AT91C_TC_ACPC_CLEAR EQU (0x2:SHL:18) ;- (TC) Effect: clear +AT91C_TC_ACPC_TOGGLE EQU (0x3:SHL:18) ;- (TC) Effect: toggle +AT91C_TC_AEEVT EQU (0x3:SHL:20) ;- (TC) External Event Effect on TIOA +AT91C_TC_AEEVT_NONE EQU (0x0:SHL:20) ;- (TC) Effect: none +AT91C_TC_AEEVT_SET EQU (0x1:SHL:20) ;- (TC) Effect: set +AT91C_TC_AEEVT_CLEAR EQU (0x2:SHL:20) ;- (TC) Effect: clear +AT91C_TC_AEEVT_TOGGLE EQU (0x3:SHL:20) ;- (TC) Effect: toggle +AT91C_TC_ASWTRG EQU (0x3:SHL:22) ;- (TC) Software Trigger Effect on TIOA +AT91C_TC_ASWTRG_NONE EQU (0x0:SHL:22) ;- (TC) Effect: none +AT91C_TC_ASWTRG_SET EQU (0x1:SHL:22) ;- (TC) Effect: set +AT91C_TC_ASWTRG_CLEAR EQU (0x2:SHL:22) ;- (TC) Effect: clear +AT91C_TC_ASWTRG_TOGGLE EQU (0x3:SHL:22) ;- (TC) Effect: toggle +AT91C_TC_BCPB EQU (0x3:SHL:24) ;- (TC) RB Compare Effect on TIOB +AT91C_TC_BCPB_NONE EQU (0x0:SHL:24) ;- (TC) Effect: none +AT91C_TC_BCPB_SET EQU (0x1:SHL:24) ;- (TC) Effect: set +AT91C_TC_BCPB_CLEAR EQU (0x2:SHL:24) ;- (TC) Effect: clear +AT91C_TC_BCPB_TOGGLE EQU (0x3:SHL:24) ;- (TC) Effect: toggle +AT91C_TC_BCPC EQU (0x3:SHL:26) ;- (TC) RC Compare Effect on TIOB +AT91C_TC_BCPC_NONE EQU (0x0:SHL:26) ;- (TC) Effect: none +AT91C_TC_BCPC_SET EQU (0x1:SHL:26) ;- (TC) Effect: set +AT91C_TC_BCPC_CLEAR EQU (0x2:SHL:26) ;- (TC) Effect: clear +AT91C_TC_BCPC_TOGGLE EQU (0x3:SHL:26) ;- (TC) Effect: toggle +AT91C_TC_BEEVT EQU (0x3:SHL:28) ;- (TC) External Event Effect on TIOB +AT91C_TC_BEEVT_NONE EQU (0x0:SHL:28) ;- (TC) Effect: none +AT91C_TC_BEEVT_SET EQU (0x1:SHL:28) ;- (TC) Effect: set +AT91C_TC_BEEVT_CLEAR EQU (0x2:SHL:28) ;- (TC) Effect: clear +AT91C_TC_BEEVT_TOGGLE EQU (0x3:SHL:28) ;- (TC) Effect: toggle +AT91C_TC_BSWTRG EQU (0x3:SHL:30) ;- (TC) Software Trigger Effect on TIOB +AT91C_TC_BSWTRG_NONE EQU (0x0:SHL:30) ;- (TC) Effect: none +AT91C_TC_BSWTRG_SET EQU (0x1:SHL:30) ;- (TC) Effect: set +AT91C_TC_BSWTRG_CLEAR EQU (0x2:SHL:30) ;- (TC) Effect: clear +AT91C_TC_BSWTRG_TOGGLE EQU (0x3:SHL:30) ;- (TC) Effect: toggle +;- -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- +AT91C_TC_COVFS EQU (0x1:SHL:0) ;- (TC) Counter Overflow +AT91C_TC_LOVRS EQU (0x1:SHL:1) ;- (TC) Load Overrun +AT91C_TC_CPAS EQU (0x1:SHL:2) ;- (TC) RA Compare +AT91C_TC_CPBS EQU (0x1:SHL:3) ;- (TC) RB Compare +AT91C_TC_CPCS EQU (0x1:SHL:4) ;- (TC) RC Compare +AT91C_TC_LDRAS EQU (0x1:SHL:5) ;- (TC) RA Loading +AT91C_TC_LDRBS EQU (0x1:SHL:6) ;- (TC) RB Loading +AT91C_TC_ETRCS EQU (0x1:SHL:7) ;- (TC) External Trigger +AT91C_TC_ETRGS EQU (0x1:SHL:16) ;- (TC) Clock Enabling +AT91C_TC_MTIOA EQU (0x1:SHL:17) ;- (TC) TIOA Mirror +AT91C_TC_MTIOB EQU (0x1:SHL:18) ;- (TC) TIOA Mirror +;- -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- +;- -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- +;- -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Timer Counter Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_TCB +TCB_TC0 # 48 ;- TC Channel 0 + # 16 ;- Reserved +TCB_TC1 # 48 ;- TC Channel 1 + # 16 ;- Reserved +TCB_TC2 # 48 ;- TC Channel 2 + # 16 ;- Reserved +TCB_BCR # 4 ;- TC Block Control Register +TCB_BMR # 4 ;- TC Block Mode Register +;- -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- +AT91C_TCB_SYNC EQU (0x1:SHL:0) ;- (TCB) Synchro Command +;- -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- +AT91C_TCB_TC0XC0S EQU (0x1:SHL:0) ;- (TCB) External Clock Signal 0 Selection +AT91C_TCB_TC0XC0S_TCLK0 EQU (0x0) ;- (TCB) TCLK0 connected to XC0 +AT91C_TCB_TC0XC0S_NONE EQU (0x1) ;- (TCB) None signal connected to XC0 +AT91C_TCB_TC0XC0S_TIOA1 EQU (0x2) ;- (TCB) TIOA1 connected to XC0 +AT91C_TCB_TC0XC0S_TIOA2 EQU (0x3) ;- (TCB) TIOA2 connected to XC0 +AT91C_TCB_TC1XC1S EQU (0x1:SHL:2) ;- (TCB) External Clock Signal 1 Selection +AT91C_TCB_TC1XC1S_TCLK1 EQU (0x0:SHL:2) ;- (TCB) TCLK1 connected to XC1 +AT91C_TCB_TC1XC1S_NONE EQU (0x1:SHL:2) ;- (TCB) None signal connected to XC1 +AT91C_TCB_TC1XC1S_TIOA0 EQU (0x2:SHL:2) ;- (TCB) TIOA0 connected to XC1 +AT91C_TCB_TC1XC1S_TIOA2 EQU (0x3:SHL:2) ;- (TCB) TIOA2 connected to XC1 +AT91C_TCB_TC2XC2S EQU (0x1:SHL:4) ;- (TCB) External Clock Signal 2 Selection +AT91C_TCB_TC2XC2S_TCLK2 EQU (0x0:SHL:4) ;- (TCB) TCLK2 connected to XC2 +AT91C_TCB_TC2XC2S_NONE EQU (0x1:SHL:4) ;- (TCB) None signal connected to XC2 +AT91C_TCB_TC2XC2S_TIOA0 EQU (0x2:SHL:4) ;- (TCB) TIOA0 connected to XC2 +AT91C_TCB_TC2XC2S_TIOA2 EQU (0x3:SHL:4) ;- (TCB) TIOA2 connected to XC2 + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR USB Host Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_UHP +UHP_HcRevision # 4 ;- Revision +UHP_HcControl # 4 ;- Operating modes for the Host Controller +UHP_HcCommandStatus # 4 ;- Command & status Register +UHP_HcInterruptStatus # 4 ;- Interrupt Status Register +UHP_HcInterruptEnable # 4 ;- Interrupt Enable Register +UHP_HcInterruptDisable # 4 ;- Interrupt Disable Register +UHP_HcHCCA # 4 ;- Pointer to the Host Controller Communication Area +UHP_HcPeriodCurrentED # 4 ;- Current Isochronous or Interrupt Endpoint Descriptor +UHP_HcControlHeadED # 4 ;- First Endpoint Descriptor of the Control list +UHP_HcControlCurrentED # 4 ;- Endpoint Control and Status Register +UHP_HcBulkHeadED # 4 ;- First endpoint register of the Bulk list +UHP_HcBulkCurrentED # 4 ;- Current endpoint of the Bulk list +UHP_HcBulkDoneHead # 4 ;- Last completed transfer descriptor +UHP_HcFmInterval # 4 ;- Bit time between 2 consecutive SOFs +UHP_HcFmRemaining # 4 ;- Bit time remaining in the current Frame +UHP_HcFmNumber # 4 ;- Frame number +UHP_HcPeriodicStart # 4 ;- Periodic Start +UHP_HcLSThreshold # 4 ;- LS Threshold +UHP_HcRhDescriptorA # 4 ;- Root Hub characteristics A +UHP_HcRhDescriptorB # 4 ;- Root Hub characteristics B +UHP_HcRhStatus # 4 ;- Root Hub Status register +UHP_HcRhPortStatus # 8 ;- Root Hub Port Status Register + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Ethernet MAC +;- ***************************************************************************** + ^ 0 ;- AT91S_EMAC +EMAC_CTL # 4 ;- Network Control Register +EMAC_CFG # 4 ;- Network Configuration Register +EMAC_SR # 4 ;- Network Status Register +EMAC_TAR # 4 ;- Transmit Address Register +EMAC_TCR # 4 ;- Transmit Control Register +EMAC_TSR # 4 ;- Transmit Status Register +EMAC_RBQP # 4 ;- Receive Buffer Queue Pointer + # 4 ;- Reserved +EMAC_RSR # 4 ;- Receive Status Register +EMAC_ISR # 4 ;- Interrupt Status Register +EMAC_IER # 4 ;- Interrupt Enable Register +EMAC_IDR # 4 ;- Interrupt Disable Register +EMAC_IMR # 4 ;- Interrupt Mask Register +EMAC_MAN # 4 ;- PHY Maintenance Register + # 8 ;- Reserved +EMAC_FRA # 4 ;- Frames Transmitted OK Register +EMAC_SCOL # 4 ;- Single Collision Frame Register +EMAC_MCOL # 4 ;- Multiple Collision Frame Register +EMAC_OK # 4 ;- Frames Received OK Register +EMAC_SEQE # 4 ;- Frame Check Sequence Error Register +EMAC_ALE # 4 ;- Alignment Error Register +EMAC_DTE # 4 ;- Deferred Transmission Frame Register +EMAC_LCOL # 4 ;- Late Collision Register +EMAC_ECOL # 4 ;- Excessive Collision Register +EMAC_CSE # 4 ;- Carrier Sense Error Register +EMAC_TUE # 4 ;- Transmit Underrun Error Register +EMAC_CDE # 4 ;- Code Error Register +EMAC_ELR # 4 ;- Excessive Length Error Register +EMAC_RJB # 4 ;- Receive Jabber Register +EMAC_USF # 4 ;- Undersize Frame Register +EMAC_SQEE # 4 ;- SQE Test Error Register +EMAC_DRFC # 4 ;- Discarded RX Frame Register + # 12 ;- Reserved +EMAC_HSH # 4 ;- Hash Address High[63:32] +EMAC_HSL # 4 ;- Hash Address Low[31:0] +EMAC_SA1L # 4 ;- Specific Address 1 Low, First 4 bytes +EMAC_SA1H # 4 ;- Specific Address 1 High, Last 2 bytes +EMAC_SA2L # 4 ;- Specific Address 2 Low, First 4 bytes +EMAC_SA2H # 4 ;- Specific Address 2 High, Last 2 bytes +EMAC_SA3L # 4 ;- Specific Address 3 Low, First 4 bytes +EMAC_SA3H # 4 ;- Specific Address 3 High, Last 2 bytes +EMAC_SA4L # 4 ;- Specific Address 4 Low, First 4 bytes +EMAC_SA4H # 4 ;- Specific Address 4 High, Last 2 bytesr +;- -------- EMAC_CTL : (EMAC Offset: 0x0) -------- +AT91C_EMAC_LB EQU (0x1:SHL:0) ;- (EMAC) Loopback. Optional. When set, loopback signal is at high level. +AT91C_EMAC_LBL EQU (0x1:SHL:1) ;- (EMAC) Loopback local. +AT91C_EMAC_RE EQU (0x1:SHL:2) ;- (EMAC) Receive enable. +AT91C_EMAC_TE EQU (0x1:SHL:3) ;- (EMAC) Transmit enable. +AT91C_EMAC_MPE EQU (0x1:SHL:4) ;- (EMAC) Management port enable. +AT91C_EMAC_CSR EQU (0x1:SHL:5) ;- (EMAC) Clear statistics registers. +AT91C_EMAC_ISR EQU (0x1:SHL:6) ;- (EMAC) Increment statistics registers. +AT91C_EMAC_WES EQU (0x1:SHL:7) ;- (EMAC) Write enable for statistics registers. +AT91C_EMAC_BP EQU (0x1:SHL:8) ;- (EMAC) Back pressure. +;- -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- +AT91C_EMAC_SPD EQU (0x1:SHL:0) ;- (EMAC) Speed. +AT91C_EMAC_FD EQU (0x1:SHL:1) ;- (EMAC) Full duplex. +AT91C_EMAC_BR EQU (0x1:SHL:2) ;- (EMAC) Bit rate. +AT91C_EMAC_CAF EQU (0x1:SHL:4) ;- (EMAC) Copy all frames. +AT91C_EMAC_NBC EQU (0x1:SHL:5) ;- (EMAC) No broadcast. +AT91C_EMAC_MTI EQU (0x1:SHL:6) ;- (EMAC) Multicast hash enable +AT91C_EMAC_UNI EQU (0x1:SHL:7) ;- (EMAC) Unicast hash enable. +AT91C_EMAC_BIG EQU (0x1:SHL:8) ;- (EMAC) Receive 1522 bytes. +AT91C_EMAC_EAE EQU (0x1:SHL:9) ;- (EMAC) External address match enable. +AT91C_EMAC_CLK EQU (0x3:SHL:10) ;- (EMAC) +AT91C_EMAC_CLK_HCLK_8 EQU (0x0:SHL:10) ;- (EMAC) HCLK divided by 8 +AT91C_EMAC_CLK_HCLK_16 EQU (0x1:SHL:10) ;- (EMAC) HCLK divided by 16 +AT91C_EMAC_CLK_HCLK_32 EQU (0x2:SHL:10) ;- (EMAC) HCLK divided by 32 +AT91C_EMAC_CLK_HCLK_64 EQU (0x3:SHL:10) ;- (EMAC) HCLK divided by 64 +AT91C_EMAC_RTY EQU (0x1:SHL:12) ;- (EMAC) +AT91C_EMAC_RMII EQU (0x1:SHL:13) ;- (EMAC) +;- -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- +AT91C_EMAC_MDIO EQU (0x1:SHL:1) ;- (EMAC) +AT91C_EMAC_IDLE EQU (0x1:SHL:2) ;- (EMAC) +;- -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- +AT91C_EMAC_LEN EQU (0x7FF:SHL:0) ;- (EMAC) +AT91C_EMAC_NCRC EQU (0x1:SHL:15) ;- (EMAC) +;- -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- +AT91C_EMAC_OVR EQU (0x1:SHL:0) ;- (EMAC) +AT91C_EMAC_COL EQU (0x1:SHL:1) ;- (EMAC) +AT91C_EMAC_RLE EQU (0x1:SHL:2) ;- (EMAC) +AT91C_EMAC_TXIDLE EQU (0x1:SHL:3) ;- (EMAC) +AT91C_EMAC_BNQ EQU (0x1:SHL:4) ;- (EMAC) +AT91C_EMAC_COMP EQU (0x1:SHL:5) ;- (EMAC) +AT91C_EMAC_UND EQU (0x1:SHL:6) ;- (EMAC) +;- -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- +AT91C_EMAC_BNA EQU (0x1:SHL:0) ;- (EMAC) +AT91C_EMAC_REC EQU (0x1:SHL:1) ;- (EMAC) +;- -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- +AT91C_EMAC_DONE EQU (0x1:SHL:0) ;- (EMAC) +AT91C_EMAC_RCOM EQU (0x1:SHL:1) ;- (EMAC) +AT91C_EMAC_RBNA EQU (0x1:SHL:2) ;- (EMAC) +AT91C_EMAC_TOVR EQU (0x1:SHL:3) ;- (EMAC) +AT91C_EMAC_TUND EQU (0x1:SHL:4) ;- (EMAC) +AT91C_EMAC_RTRY EQU (0x1:SHL:5) ;- (EMAC) +AT91C_EMAC_TBRE EQU (0x1:SHL:6) ;- (EMAC) +AT91C_EMAC_TCOM EQU (0x1:SHL:7) ;- (EMAC) +AT91C_EMAC_TIDLE EQU (0x1:SHL:8) ;- (EMAC) +AT91C_EMAC_LINK EQU (0x1:SHL:9) ;- (EMAC) +AT91C_EMAC_ROVR EQU (0x1:SHL:10) ;- (EMAC) +AT91C_EMAC_HRESP EQU (0x1:SHL:11) ;- (EMAC) +;- -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- +;- -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- +;- -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- +;- -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- +AT91C_EMAC_DATA EQU (0xFFFF:SHL:0) ;- (EMAC) +AT91C_EMAC_CODE EQU (0x3:SHL:16) ;- (EMAC) +AT91C_EMAC_REGA EQU (0x1F:SHL:18) ;- (EMAC) +AT91C_EMAC_PHYA EQU (0x1F:SHL:23) ;- (EMAC) +AT91C_EMAC_RW EQU (0x3:SHL:28) ;- (EMAC) +AT91C_EMAC_HIGH EQU (0x1:SHL:30) ;- (EMAC) +AT91C_EMAC_LOW EQU (0x1:SHL:31) ;- (EMAC) + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR External Bus Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_EBI +EBI_CSA # 4 ;- Chip Select Assignment Register +EBI_CFGR # 4 ;- Configuration Register +;- -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- +AT91C_EBI_CS0A EQU (0x1:SHL:0) ;- (EBI) Chip Select 0 Assignment +AT91C_EBI_CS0A_SMC EQU (0x0) ;- (EBI) Chip Select 0 is assigned to the Static Memory Controller. +AT91C_EBI_CS0A_BFC EQU (0x1) ;- (EBI) Chip Select 0 is assigned to the Burst Flash Controller. +AT91C_EBI_CS1A EQU (0x1:SHL:1) ;- (EBI) Chip Select 1 Assignment +AT91C_EBI_CS1A_SMC EQU (0x0:SHL:1) ;- (EBI) Chip Select 1 is assigned to the Static Memory Controller. +AT91C_EBI_CS1A_SDRAMC EQU (0x1:SHL:1) ;- (EBI) Chip Select 1 is assigned to the SDRAM Controller. +AT91C_EBI_CS3A EQU (0x1:SHL:3) ;- (EBI) Chip Select 3 Assignment +AT91C_EBI_CS3A_SMC EQU (0x0:SHL:3) ;- (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. +AT91C_EBI_CS3A_SMC_SmartMedia EQU (0x1:SHL:3) ;- (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. +AT91C_EBI_CS4A EQU (0x1:SHL:4) ;- (EBI) Chip Select 4 Assignment +AT91C_EBI_CS4A_SMC EQU (0x0:SHL:4) ;- (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. +AT91C_EBI_CS4A_SMC_CompactFlash EQU (0x1:SHL:4) ;- (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. +;- -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- +AT91C_EBI_DBPUC EQU (0x1:SHL:0) ;- (EBI) Data Bus Pull-Up Configuration +AT91C_EBI_EBSEN EQU (0x1:SHL:1) ;- (EBI) Bus Sharing Enable + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_SMC2 +SMC2_CSR # 32 ;- SMC2 Chip Select Register +;- -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- +AT91C_SMC2_NWS EQU (0x7F:SHL:0) ;- (SMC2) Number of Wait States +AT91C_SMC2_WSEN EQU (0x1:SHL:7) ;- (SMC2) Wait State Enable +AT91C_SMC2_TDF EQU (0xF:SHL:8) ;- (SMC2) Data Float Time +AT91C_SMC2_BAT EQU (0x1:SHL:12) ;- (SMC2) Byte Access Type +AT91C_SMC2_DBW EQU (0x1:SHL:13) ;- (SMC2) Data Bus Width +AT91C_SMC2_DBW_16 EQU (0x1:SHL:13) ;- (SMC2) 16-bit. +AT91C_SMC2_DBW_8 EQU (0x2:SHL:13) ;- (SMC2) 8-bit. +AT91C_SMC2_DRP EQU (0x1:SHL:15) ;- (SMC2) Data Read Protocol +AT91C_SMC2_ACSS EQU (0x3:SHL:16) ;- (SMC2) Address to Chip Select Setup +AT91C_SMC2_ACSS_STANDARD EQU (0x0:SHL:16) ;- (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. +AT91C_SMC2_ACSS_1_CYCLE EQU (0x1:SHL:16) ;- (SMC2) One cycle less at the beginning and the end of the access. +AT91C_SMC2_ACSS_2_CYCLES EQU (0x2:SHL:16) ;- (SMC2) Two cycles less at the beginning and the end of the access. +AT91C_SMC2_ACSS_3_CYCLES EQU (0x3:SHL:16) ;- (SMC2) Three cycles less at the beginning and the end of the access. +AT91C_SMC2_RWSETUP EQU (0x7:SHL:24) ;- (SMC2) Read and Write Signal Setup Time +AT91C_SMC2_RWHOLD EQU (0x7:SHL:29) ;- (SMC2) Read and Write Signal Hold Time + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR SDRAM Controller Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_SDRC +SDRC_MR # 4 ;- SDRAM Controller Mode Register +SDRC_TR # 4 ;- SDRAM Controller Refresh Timer Register +SDRC_CR # 4 ;- SDRAM Controller Configuration Register +SDRC_SRR # 4 ;- SDRAM Controller Self Refresh Register +SDRC_LPR # 4 ;- SDRAM Controller Low Power Register +SDRC_IER # 4 ;- SDRAM Controller Interrupt Enable Register +SDRC_IDR # 4 ;- SDRAM Controller Interrupt Disable Register +SDRC_IMR # 4 ;- SDRAM Controller Interrupt Mask Register +SDRC_ISR # 4 ;- SDRAM Controller Interrupt Mask Register +;- -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- +AT91C_SDRC_MODE EQU (0xF:SHL:0) ;- (SDRC) Mode +AT91C_SDRC_MODE_NORMAL_CMD EQU (0x0) ;- (SDRC) Normal Mode +AT91C_SDRC_MODE_NOP_CMD EQU (0x1) ;- (SDRC) NOP Command +AT91C_SDRC_MODE_PRCGALL_CMD EQU (0x2) ;- (SDRC) All Banks Precharge Command +AT91C_SDRC_MODE_LMR_CMD EQU (0x3) ;- (SDRC) Load Mode Register Command +AT91C_SDRC_MODE_RFSH_CMD EQU (0x4) ;- (SDRC) Refresh Command +AT91C_SDRC_DBW EQU (0x1:SHL:4) ;- (SDRC) Data Bus Width +AT91C_SDRC_DBW_32_BITS EQU (0x0:SHL:4) ;- (SDRC) 32 Bits datas bus +AT91C_SDRC_DBW_16_BITS EQU (0x1:SHL:4) ;- (SDRC) 16 Bits datas bus +;- -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- +AT91C_SDRC_COUNT EQU (0xFFF:SHL:0) ;- (SDRC) Refresh Counter +;- -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- +AT91C_SDRC_NC EQU (0x3:SHL:0) ;- (SDRC) Number of Column Bits +AT91C_SDRC_NC_8 EQU (0x0) ;- (SDRC) 8 Bits +AT91C_SDRC_NC_9 EQU (0x1) ;- (SDRC) 9 Bits +AT91C_SDRC_NC_10 EQU (0x2) ;- (SDRC) 10 Bits +AT91C_SDRC_NC_11 EQU (0x3) ;- (SDRC) 11 Bits +AT91C_SDRC_NR EQU (0x3:SHL:2) ;- (SDRC) Number of Row Bits +AT91C_SDRC_NR_11 EQU (0x0:SHL:2) ;- (SDRC) 11 Bits +AT91C_SDRC_NR_12 EQU (0x1:SHL:2) ;- (SDRC) 12 Bits +AT91C_SDRC_NR_13 EQU (0x2:SHL:2) ;- (SDRC) 13 Bits +AT91C_SDRC_NB EQU (0x1:SHL:4) ;- (SDRC) Number of Banks +AT91C_SDRC_NB_2_BANKS EQU (0x0:SHL:4) ;- (SDRC) 2 banks +AT91C_SDRC_NB_4_BANKS EQU (0x1:SHL:4) ;- (SDRC) 4 banks +AT91C_SDRC_CAS EQU (0x3:SHL:5) ;- (SDRC) CAS Latency +AT91C_SDRC_CAS_2 EQU (0x2:SHL:5) ;- (SDRC) 2 cycles +AT91C_SDRC_TWR EQU (0xF:SHL:7) ;- (SDRC) Number of Write Recovery Time Cycles +AT91C_SDRC_TRC EQU (0xF:SHL:11) ;- (SDRC) Number of RAS Cycle Time Cycles +AT91C_SDRC_TRP EQU (0xF:SHL:15) ;- (SDRC) Number of RAS Precharge Time Cycles +AT91C_SDRC_TRCD EQU (0xF:SHL:19) ;- (SDRC) Number of RAS to CAS Delay Cycles +AT91C_SDRC_TRAS EQU (0xF:SHL:23) ;- (SDRC) Number of RAS Active Time Cycles +AT91C_SDRC_TXSR EQU (0xF:SHL:27) ;- (SDRC) Number of Command Recovery Time Cycles +;- -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- +AT91C_SDRC_SRCB EQU (0x1:SHL:0) ;- (SDRC) Self-refresh Command Bit +;- -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- +AT91C_SDRC_LPCB EQU (0x1:SHL:0) ;- (SDRC) Low-power Command Bit +;- -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- +AT91C_SDRC_RES EQU (0x1:SHL:0) ;- (SDRC) Refresh Error Status +;- -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- +;- -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- +;- -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- + +;- ***************************************************************************** +;- SOFTWARE API DEFINITION FOR Burst Flash Controller Interface +;- ***************************************************************************** + ^ 0 ;- AT91S_BFC +BFC_MR # 4 ;- BFC Mode Register +;- -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- +AT91C_BFC_BFCOM EQU (0x3:SHL:0) ;- (BFC) Burst Flash Controller Operating Mode +AT91C_BFC_BFCOM_DISABLED EQU (0x0) ;- (BFC) NPCS0 is driven by the SMC or remains high. +AT91C_BFC_BFCOM_ASYNC EQU (0x1) ;- (BFC) Asynchronous +AT91C_BFC_BFCOM_BURST_READ EQU (0x2) ;- (BFC) Burst Read +AT91C_BFC_BFCC EQU (0x3:SHL:2) ;- (BFC) Burst Flash Controller Operating Mode +AT91C_BFC_BFCC_MCK EQU (0x1:SHL:2) ;- (BFC) Master Clock. +AT91C_BFC_BFCC_MCK_DIV_2 EQU (0x2:SHL:2) ;- (BFC) Master Clock divided by 2. +AT91C_BFC_BFCC_MCK_DIV_4 EQU (0x3:SHL:2) ;- (BFC) Master Clock divided by 4. +AT91C_BFC_AVL EQU (0xF:SHL:4) ;- (BFC) Address Valid Latency +AT91C_BFC_PAGES EQU (0x7:SHL:8) ;- (BFC) Page Size +AT91C_BFC_PAGES_NO_PAGE EQU (0x0:SHL:8) ;- (BFC) No page handling. +AT91C_BFC_PAGES_16 EQU (0x1:SHL:8) ;- (BFC) 16 bytes page size. +AT91C_BFC_PAGES_32 EQU (0x2:SHL:8) ;- (BFC) 32 bytes page size. +AT91C_BFC_PAGES_64 EQU (0x3:SHL:8) ;- (BFC) 64 bytes page size. +AT91C_BFC_PAGES_128 EQU (0x4:SHL:8) ;- (BFC) 128 bytes page size. +AT91C_BFC_PAGES_256 EQU (0x5:SHL:8) ;- (BFC) 256 bytes page size. +AT91C_BFC_PAGES_512 EQU (0x6:SHL:8) ;- (BFC) 512 bytes page size. +AT91C_BFC_PAGES_1024 EQU (0x7:SHL:8) ;- (BFC) 1024 bytes page size. +AT91C_BFC_OEL EQU (0x3:SHL:12) ;- (BFC) Output Enable Latency +AT91C_BFC_BAAEN EQU (0x1:SHL:16) ;- (BFC) Burst Address Advance Enable +AT91C_BFC_BFOEH EQU (0x1:SHL:17) ;- (BFC) Burst Flash Output Enable Handling +AT91C_BFC_MUXEN EQU (0x1:SHL:18) ;- (BFC) Multiplexed Bus Enable +AT91C_BFC_RDYEN EQU (0x1:SHL:19) ;- (BFC) Ready Enable Mode + +;- ***************************************************************************** +;- REGISTER ADDRESS DEFINITION FOR AT91RM9200 +;- ***************************************************************************** +;- ========== Register definition for SYS peripheral ========== +;- ========== Register definition for MC peripheral ========== +AT91C_MC_PUER EQU (0xFFFFFF54) ;- (MC) MC Protection Unit Enable Register +AT91C_MC_ASR EQU (0xFFFFFF04) ;- (MC) MC Abort Status Register +AT91C_MC_PUP EQU (0xFFFFFF50) ;- (MC) MC Protection Unit Peripherals +AT91C_MC_PUIA EQU (0xFFFFFF10) ;- (MC) MC Protection Unit Area +AT91C_MC_AASR EQU (0xFFFFFF08) ;- (MC) MC Abort Address Status Register +AT91C_MC_RCR EQU (0xFFFFFF00) ;- (MC) MC Remap Control Register +;- ========== Register definition for RTC peripheral ========== +AT91C_RTC_IMR EQU (0xFFFFFE28) ;- (RTC) Interrupt Mask Register +AT91C_RTC_IER EQU (0xFFFFFE20) ;- (RTC) Interrupt Enable Register +AT91C_RTC_SR EQU (0xFFFFFE18) ;- (RTC) Status Register +AT91C_RTC_TIMALR EQU (0xFFFFFE10) ;- (RTC) Time Alarm Register +AT91C_RTC_TIMR EQU (0xFFFFFE08) ;- (RTC) Time Register +AT91C_RTC_CR EQU (0xFFFFFE00) ;- (RTC) Control Register +AT91C_RTC_VER EQU (0xFFFFFE2C) ;- (RTC) Valid Entry Register +AT91C_RTC_IDR EQU (0xFFFFFE24) ;- (RTC) Interrupt Disable Register +AT91C_RTC_SCCR EQU (0xFFFFFE1C) ;- (RTC) Status Clear Command Register +AT91C_RTC_CALALR EQU (0xFFFFFE14) ;- (RTC) Calendar Alarm Register +AT91C_RTC_CALR EQU (0xFFFFFE0C) ;- (RTC) Calendar Register +AT91C_RTC_MR EQU (0xFFFFFE04) ;- (RTC) Mode Register +;- ========== Register definition for ST peripheral ========== +AT91C_ST_CRTR EQU (0xFFFFFD24) ;- (ST) Current Real-time Register +AT91C_ST_IMR EQU (0xFFFFFD1C) ;- (ST) Interrupt Mask Register +AT91C_ST_IER EQU (0xFFFFFD14) ;- (ST) Interrupt Enable Register +AT91C_ST_RTMR EQU (0xFFFFFD0C) ;- (ST) Real-time Mode Register +AT91C_ST_PIMR EQU (0xFFFFFD04) ;- (ST) Period Interval Mode Register +AT91C_ST_RTAR EQU (0xFFFFFD20) ;- (ST) Real-time Alarm Register +AT91C_ST_IDR EQU (0xFFFFFD18) ;- (ST) Interrupt Disable Register +AT91C_ST_SR EQU (0xFFFFFD10) ;- (ST) Status Register +AT91C_ST_WDMR EQU (0xFFFFFD08) ;- (ST) Watchdog Mode Register +AT91C_ST_CR EQU (0xFFFFFD00) ;- (ST) Control Register +;- ========== Register definition for PMC peripheral ========== +AT91C_PMC_SCSR EQU (0xFFFFFC08) ;- (PMC) System Clock Status Register +AT91C_PMC_SCER EQU (0xFFFFFC00) ;- (PMC) System Clock Enable Register +AT91C_PMC_IMR EQU (0xFFFFFC6C) ;- (PMC) Interrupt Mask Register +AT91C_PMC_IDR EQU (0xFFFFFC64) ;- (PMC) Interrupt Disable Register +AT91C_PMC_PCDR EQU (0xFFFFFC14) ;- (PMC) Peripheral Clock Disable Register +AT91C_PMC_SCDR EQU (0xFFFFFC04) ;- (PMC) System Clock Disable Register +AT91C_PMC_SR EQU (0xFFFFFC68) ;- (PMC) Status Register +AT91C_PMC_IER EQU (0xFFFFFC60) ;- (PMC) Interrupt Enable Register +AT91C_PMC_MCKR EQU (0xFFFFFC30) ;- (PMC) Master Clock Register +AT91C_PMC_PCER EQU (0xFFFFFC10) ;- (PMC) Peripheral Clock Enable Register +AT91C_PMC_PCSR EQU (0xFFFFFC18) ;- (PMC) Peripheral Clock Status Register +AT91C_PMC_PCKR EQU (0xFFFFFC40) ;- (PMC) Programmable Clock Register +;- ========== Register definition for CKGR peripheral ========== +AT91C_CKGR_PLLBR EQU (0xFFFFFC2C) ;- (CKGR) PLL B Register +AT91C_CKGR_MCFR EQU (0xFFFFFC24) ;- (CKGR) Main Clock Frequency Register +AT91C_CKGR_PLLAR EQU (0xFFFFFC28) ;- (CKGR) PLL A Register +AT91C_CKGR_MOR EQU (0xFFFFFC20) ;- (CKGR) Main Oscillator Register +;- ========== Register definition for PIOD peripheral ========== +AT91C_PIOD_PDSR EQU (0xFFFFFA3C) ;- (PIOD) Pin Data Status Register +AT91C_PIOD_CODR EQU (0xFFFFFA34) ;- (PIOD) Clear Output Data Register +AT91C_PIOD_OWER EQU (0xFFFFFAA0) ;- (PIOD) Output Write Enable Register +AT91C_PIOD_MDER EQU (0xFFFFFA50) ;- (PIOD) Multi-driver Enable Register +AT91C_PIOD_IMR EQU (0xFFFFFA48) ;- (PIOD) Interrupt Mask Register +AT91C_PIOD_IER EQU (0xFFFFFA40) ;- (PIOD) Interrupt Enable Register +AT91C_PIOD_ODSR EQU (0xFFFFFA38) ;- (PIOD) Output Data Status Register +AT91C_PIOD_SODR EQU (0xFFFFFA30) ;- (PIOD) Set Output Data Register +AT91C_PIOD_PER EQU (0xFFFFFA00) ;- (PIOD) PIO Enable Register +AT91C_PIOD_OWDR EQU (0xFFFFFAA4) ;- (PIOD) Output Write Disable Register +AT91C_PIOD_PPUER EQU (0xFFFFFA64) ;- (PIOD) Pull-up Enable Register +AT91C_PIOD_MDDR EQU (0xFFFFFA54) ;- (PIOD) Multi-driver Disable Register +AT91C_PIOD_ISR EQU (0xFFFFFA4C) ;- (PIOD) Interrupt Status Register +AT91C_PIOD_IDR EQU (0xFFFFFA44) ;- (PIOD) Interrupt Disable Register +AT91C_PIOD_PDR EQU (0xFFFFFA04) ;- (PIOD) PIO Disable Register +AT91C_PIOD_ODR EQU (0xFFFFFA14) ;- (PIOD) Output Disable Registerr +AT91C_PIOD_OWSR EQU (0xFFFFFAA8) ;- (PIOD) Output Write Status Register +AT91C_PIOD_ABSR EQU (0xFFFFFA78) ;- (PIOD) AB Select Status Register +AT91C_PIOD_ASR EQU (0xFFFFFA70) ;- (PIOD) Select A Register +AT91C_PIOD_PPUSR EQU (0xFFFFFA68) ;- (PIOD) Pad Pull-up Status Register +AT91C_PIOD_PPUDR EQU (0xFFFFFA60) ;- (PIOD) Pull-up Disable Register +AT91C_PIOD_MDSR EQU (0xFFFFFA58) ;- (PIOD) Multi-driver Status Register +AT91C_PIOD_PSR EQU (0xFFFFFA08) ;- (PIOD) PIO Status Register +AT91C_PIOD_OER EQU (0xFFFFFA10) ;- (PIOD) Output Enable Register +AT91C_PIOD_OSR EQU (0xFFFFFA18) ;- (PIOD) Output Status Register +AT91C_PIOD_IFER EQU (0xFFFFFA20) ;- (PIOD) Input Filter Enable Register +AT91C_PIOD_BSR EQU (0xFFFFFA74) ;- (PIOD) Select B Register +AT91C_PIOD_IFDR EQU (0xFFFFFA24) ;- (PIOD) Input Filter Disable Register +AT91C_PIOD_IFSR EQU (0xFFFFFA28) ;- (PIOD) Input Filter Status Register +;- ========== Register definition for PIOC peripheral ========== +AT91C_PIOC_IFDR EQU (0xFFFFF824) ;- (PIOC) Input Filter Disable Register +AT91C_PIOC_ODR EQU (0xFFFFF814) ;- (PIOC) Output Disable Registerr +AT91C_PIOC_ABSR EQU (0xFFFFF878) ;- (PIOC) AB Select Status Register +AT91C_PIOC_SODR EQU (0xFFFFF830) ;- (PIOC) Set Output Data Register +AT91C_PIOC_IFSR EQU (0xFFFFF828) ;- (PIOC) Input Filter Status Register +AT91C_PIOC_CODR EQU (0xFFFFF834) ;- (PIOC) Clear Output Data Register +AT91C_PIOC_ODSR EQU (0xFFFFF838) ;- (PIOC) Output Data Status Register +AT91C_PIOC_IER EQU (0xFFFFF840) ;- (PIOC) Interrupt Enable Register +AT91C_PIOC_IMR EQU (0xFFFFF848) ;- (PIOC) Interrupt Mask Register +AT91C_PIOC_OWDR EQU (0xFFFFF8A4) ;- (PIOC) Output Write Disable Register +AT91C_PIOC_MDDR EQU (0xFFFFF854) ;- (PIOC) Multi-driver Disable Register +AT91C_PIOC_PDSR EQU (0xFFFFF83C) ;- (PIOC) Pin Data Status Register +AT91C_PIOC_IDR EQU (0xFFFFF844) ;- (PIOC) Interrupt Disable Register +AT91C_PIOC_ISR EQU (0xFFFFF84C) ;- (PIOC) Interrupt Status Register +AT91C_PIOC_PDR EQU (0xFFFFF804) ;- (PIOC) PIO Disable Register +AT91C_PIOC_OWSR EQU (0xFFFFF8A8) ;- (PIOC) Output Write Status Register +AT91C_PIOC_OWER EQU (0xFFFFF8A0) ;- (PIOC) Output Write Enable Register +AT91C_PIOC_ASR EQU (0xFFFFF870) ;- (PIOC) Select A Register +AT91C_PIOC_PPUSR EQU (0xFFFFF868) ;- (PIOC) Pad Pull-up Status Register +AT91C_PIOC_PPUDR EQU (0xFFFFF860) ;- (PIOC) Pull-up Disable Register +AT91C_PIOC_MDSR EQU (0xFFFFF858) ;- (PIOC) Multi-driver Status Register +AT91C_PIOC_MDER EQU (0xFFFFF850) ;- (PIOC) Multi-driver Enable Register +AT91C_PIOC_IFER EQU (0xFFFFF820) ;- (PIOC) Input Filter Enable Register +AT91C_PIOC_OSR EQU (0xFFFFF818) ;- (PIOC) Output Status Register +AT91C_PIOC_OER EQU (0xFFFFF810) ;- (PIOC) Output Enable Register +AT91C_PIOC_PSR EQU (0xFFFFF808) ;- (PIOC) PIO Status Register +AT91C_PIOC_PER EQU (0xFFFFF800) ;- (PIOC) PIO Enable Register +AT91C_PIOC_BSR EQU (0xFFFFF874) ;- (PIOC) Select B Register +AT91C_PIOC_PPUER EQU (0xFFFFF864) ;- (PIOC) Pull-up Enable Register +;- ========== Register definition for PIOB peripheral ========== +AT91C_PIOB_OWSR EQU (0xFFFFF6A8) ;- (PIOB) Output Write Status Register +AT91C_PIOB_PPUSR EQU (0xFFFFF668) ;- (PIOB) Pad Pull-up Status Register +AT91C_PIOB_PPUDR EQU (0xFFFFF660) ;- (PIOB) Pull-up Disable Register +AT91C_PIOB_MDSR EQU (0xFFFFF658) ;- (PIOB) Multi-driver Status Register +AT91C_PIOB_MDER EQU (0xFFFFF650) ;- (PIOB) Multi-driver Enable Register +AT91C_PIOB_IMR EQU (0xFFFFF648) ;- (PIOB) Interrupt Mask Register +AT91C_PIOB_OSR EQU (0xFFFFF618) ;- (PIOB) Output Status Register +AT91C_PIOB_OER EQU (0xFFFFF610) ;- (PIOB) Output Enable Register +AT91C_PIOB_PSR EQU (0xFFFFF608) ;- (PIOB) PIO Status Register +AT91C_PIOB_PER EQU (0xFFFFF600) ;- (PIOB) PIO Enable Register +AT91C_PIOB_BSR EQU (0xFFFFF674) ;- (PIOB) Select B Register +AT91C_PIOB_PPUER EQU (0xFFFFF664) ;- (PIOB) Pull-up Enable Register +AT91C_PIOB_IFDR EQU (0xFFFFF624) ;- (PIOB) Input Filter Disable Register +AT91C_PIOB_ODR EQU (0xFFFFF614) ;- (PIOB) Output Disable Registerr +AT91C_PIOB_ABSR EQU (0xFFFFF678) ;- (PIOB) AB Select Status Register +AT91C_PIOB_ASR EQU (0xFFFFF670) ;- (PIOB) Select A Register +AT91C_PIOB_IFER EQU (0xFFFFF620) ;- (PIOB) Input Filter Enable Register +AT91C_PIOB_IFSR EQU (0xFFFFF628) ;- (PIOB) Input Filter Status Register +AT91C_PIOB_SODR EQU (0xFFFFF630) ;- (PIOB) Set Output Data Register +AT91C_PIOB_ODSR EQU (0xFFFFF638) ;- (PIOB) Output Data Status Register +AT91C_PIOB_CODR EQU (0xFFFFF634) ;- (PIOB) Clear Output Data Register +AT91C_PIOB_PDSR EQU (0xFFFFF63C) ;- (PIOB) Pin Data Status Register +AT91C_PIOB_OWER EQU (0xFFFFF6A0) ;- (PIOB) Output Write Enable Register +AT91C_PIOB_IER EQU (0xFFFFF640) ;- (PIOB) Interrupt Enable Register +AT91C_PIOB_OWDR EQU (0xFFFFF6A4) ;- (PIOB) Output Write Disable Register +AT91C_PIOB_MDDR EQU (0xFFFFF654) ;- (PIOB) Multi-driver Disable Register +AT91C_PIOB_ISR EQU (0xFFFFF64C) ;- (PIOB) Interrupt Status Register +AT91C_PIOB_IDR EQU (0xFFFFF644) ;- (PIOB) Interrupt Disable Register +AT91C_PIOB_PDR EQU (0xFFFFF604) ;- (PIOB) PIO Disable Register +;- ========== Register definition for PIOA peripheral ========== +AT91C_PIOA_IMR EQU (0xFFFFF448) ;- (PIOA) Interrupt Mask Register +AT91C_PIOA_IER EQU (0xFFFFF440) ;- (PIOA) Interrupt Enable Register +AT91C_PIOA_OWDR EQU (0xFFFFF4A4) ;- (PIOA) Output Write Disable Register +AT91C_PIOA_ISR EQU (0xFFFFF44C) ;- (PIOA) Interrupt Status Register +AT91C_PIOA_PPUDR EQU (0xFFFFF460) ;- (PIOA) Pull-up Disable Register +AT91C_PIOA_MDSR EQU (0xFFFFF458) ;- (PIOA) Multi-driver Status Register +AT91C_PIOA_MDER EQU (0xFFFFF450) ;- (PIOA) Multi-driver Enable Register +AT91C_PIOA_PER EQU (0xFFFFF400) ;- (PIOA) PIO Enable Register +AT91C_PIOA_PSR EQU (0xFFFFF408) ;- (PIOA) PIO Status Register +AT91C_PIOA_OER EQU (0xFFFFF410) ;- (PIOA) Output Enable Register +AT91C_PIOA_BSR EQU (0xFFFFF474) ;- (PIOA) Select B Register +AT91C_PIOA_PPUER EQU (0xFFFFF464) ;- (PIOA) Pull-up Enable Register +AT91C_PIOA_MDDR EQU (0xFFFFF454) ;- (PIOA) Multi-driver Disable Register +AT91C_PIOA_PDR EQU (0xFFFFF404) ;- (PIOA) PIO Disable Register +AT91C_PIOA_ODR EQU (0xFFFFF414) ;- (PIOA) Output Disable Registerr +AT91C_PIOA_IFDR EQU (0xFFFFF424) ;- (PIOA) Input Filter Disable Register +AT91C_PIOA_ABSR EQU (0xFFFFF478) ;- (PIOA) AB Select Status Register +AT91C_PIOA_ASR EQU (0xFFFFF470) ;- (PIOA) Select A Register +AT91C_PIOA_PPUSR EQU (0xFFFFF468) ;- (PIOA) Pad Pull-up Status Register +AT91C_PIOA_ODSR EQU (0xFFFFF438) ;- (PIOA) Output Data Status Register +AT91C_PIOA_SODR EQU (0xFFFFF430) ;- (PIOA) Set Output Data Register +AT91C_PIOA_IFSR EQU (0xFFFFF428) ;- (PIOA) Input Filter Status Register +AT91C_PIOA_IFER EQU (0xFFFFF420) ;- (PIOA) Input Filter Enable Register +AT91C_PIOA_OSR EQU (0xFFFFF418) ;- (PIOA) Output Status Register +AT91C_PIOA_IDR EQU (0xFFFFF444) ;- (PIOA) Interrupt Disable Register +AT91C_PIOA_PDSR EQU (0xFFFFF43C) ;- (PIOA) Pin Data Status Register +AT91C_PIOA_CODR EQU (0xFFFFF434) ;- (PIOA) Clear Output Data Register +AT91C_PIOA_OWSR EQU (0xFFFFF4A8) ;- (PIOA) Output Write Status Register +AT91C_PIOA_OWER EQU (0xFFFFF4A0) ;- (PIOA) Output Write Enable Register +;- ========== Register definition for DBGU peripheral ========== +AT91C_DBGU_C2R EQU (0xFFFFF244) ;- (DBGU) Chip ID2 Register +AT91C_DBGU_THR EQU (0xFFFFF21C) ;- (DBGU) Transmitter Holding Register +AT91C_DBGU_CSR EQU (0xFFFFF214) ;- (DBGU) Channel Status Register +AT91C_DBGU_IDR EQU (0xFFFFF20C) ;- (DBGU) Interrupt Disable Register +AT91C_DBGU_MR EQU (0xFFFFF204) ;- (DBGU) Mode Register +AT91C_DBGU_FNTR EQU (0xFFFFF248) ;- (DBGU) Force NTRST Register +AT91C_DBGU_C1R EQU (0xFFFFF240) ;- (DBGU) Chip ID1 Register +AT91C_DBGU_BRGR EQU (0xFFFFF220) ;- (DBGU) Baud Rate Generator Register +AT91C_DBGU_RHR EQU (0xFFFFF218) ;- (DBGU) Receiver Holding Register +AT91C_DBGU_IMR EQU (0xFFFFF210) ;- (DBGU) Interrupt Mask Register +AT91C_DBGU_IER EQU (0xFFFFF208) ;- (DBGU) Interrupt Enable Register +AT91C_DBGU_CR EQU (0xFFFFF200) ;- (DBGU) Control Register +;- ========== Register definition for PDC_DBGU peripheral ========== +AT91C_DBGU_TNCR EQU (0xFFFFF31C) ;- (PDC_DBGU) Transmit Next Counter Register +AT91C_DBGU_RNCR EQU (0xFFFFF314) ;- (PDC_DBGU) Receive Next Counter Register +AT91C_DBGU_PTCR EQU (0xFFFFF320) ;- (PDC_DBGU) PDC Transfer Control Register +AT91C_DBGU_PTSR EQU (0xFFFFF324) ;- (PDC_DBGU) PDC Transfer Status Register +AT91C_DBGU_RCR EQU (0xFFFFF304) ;- (PDC_DBGU) Receive Counter Register +AT91C_DBGU_TCR EQU (0xFFFFF30C) ;- (PDC_DBGU) Transmit Counter Register +AT91C_DBGU_RPR EQU (0xFFFFF300) ;- (PDC_DBGU) Receive Pointer Register +AT91C_DBGU_TPR EQU (0xFFFFF308) ;- (PDC_DBGU) Transmit Pointer Register +AT91C_DBGU_RNPR EQU (0xFFFFF310) ;- (PDC_DBGU) Receive Next Pointer Register +AT91C_DBGU_TNPR EQU (0xFFFFF318) ;- (PDC_DBGU) Transmit Next Pointer Register +;- ========== Register definition for AIC peripheral ========== +AT91C_AIC_ICCR EQU (0xFFFFF128) ;- (AIC) Interrupt Clear Command Register +AT91C_AIC_IECR EQU (0xFFFFF120) ;- (AIC) Interrupt Enable Command Register +AT91C_AIC_SMR EQU (0xFFFFF000) ;- (AIC) Source Mode Register +AT91C_AIC_ISCR EQU (0xFFFFF12C) ;- (AIC) Interrupt Set Command Register +AT91C_AIC_EOICR EQU (0xFFFFF130) ;- (AIC) End of Interrupt Command Register +AT91C_AIC_DCR EQU (0xFFFFF138) ;- (AIC) Debug Control Register (Protect) +AT91C_AIC_FFER EQU (0xFFFFF140) ;- (AIC) Fast Forcing Enable Register +AT91C_AIC_SVR EQU (0xFFFFF080) ;- (AIC) Source Vector Register +AT91C_AIC_SPU EQU (0xFFFFF134) ;- (AIC) Spurious Vector Register +AT91C_AIC_FFDR EQU (0xFFFFF144) ;- (AIC) Fast Forcing Disable Register +AT91C_AIC_FVR EQU (0xFFFFF104) ;- (AIC) FIQ Vector Register +AT91C_AIC_FFSR EQU (0xFFFFF148) ;- (AIC) Fast Forcing Status Register +AT91C_AIC_IMR EQU (0xFFFFF110) ;- (AIC) Interrupt Mask Register +AT91C_AIC_ISR EQU (0xFFFFF108) ;- (AIC) Interrupt Status Register +AT91C_AIC_IVR EQU (0xFFFFF100) ;- (AIC) IRQ Vector Register +AT91C_AIC_IDCR EQU (0xFFFFF124) ;- (AIC) Interrupt Disable Command Register +AT91C_AIC_CISR EQU (0xFFFFF114) ;- (AIC) Core Interrupt Status Register +AT91C_AIC_IPR EQU (0xFFFFF10C) ;- (AIC) Interrupt Pending Register +;- ========== Register definition for PDC_SPI peripheral ========== +AT91C_SPI_PTCR EQU (0xFFFE0120) ;- (PDC_SPI) PDC Transfer Control Register +AT91C_SPI_TNPR EQU (0xFFFE0118) ;- (PDC_SPI) Transmit Next Pointer Register +AT91C_SPI_RNPR EQU (0xFFFE0110) ;- (PDC_SPI) Receive Next Pointer Register +AT91C_SPI_TPR EQU (0xFFFE0108) ;- (PDC_SPI) Transmit Pointer Register +AT91C_SPI_RPR EQU (0xFFFE0100) ;- (PDC_SPI) Receive Pointer Register +AT91C_SPI_PTSR EQU (0xFFFE0124) ;- (PDC_SPI) PDC Transfer Status Register +AT91C_SPI_TNCR EQU (0xFFFE011C) ;- (PDC_SPI) Transmit Next Counter Register +AT91C_SPI_RNCR EQU (0xFFFE0114) ;- (PDC_SPI) Receive Next Counter Register +AT91C_SPI_TCR EQU (0xFFFE010C) ;- (PDC_SPI) Transmit Counter Register +AT91C_SPI_RCR EQU (0xFFFE0104) ;- (PDC_SPI) Receive Counter Register +;- ========== Register definition for SPI peripheral ========== +AT91C_SPI_CSR EQU (0xFFFE0030) ;- (SPI) Chip Select Register +AT91C_SPI_IDR EQU (0xFFFE0018) ;- (SPI) Interrupt Disable Register +AT91C_SPI_SR EQU (0xFFFE0010) ;- (SPI) Status Register +AT91C_SPI_RDR EQU (0xFFFE0008) ;- (SPI) Receive Data Register +AT91C_SPI_CR EQU (0xFFFE0000) ;- (SPI) Control Register +AT91C_SPI_IMR EQU (0xFFFE001C) ;- (SPI) Interrupt Mask Register +AT91C_SPI_IER EQU (0xFFFE0014) ;- (SPI) Interrupt Enable Register +AT91C_SPI_TDR EQU (0xFFFE000C) ;- (SPI) Transmit Data Register +AT91C_SPI_MR EQU (0xFFFE0004) ;- (SPI) Mode Register +;- ========== Register definition for PDC_SSC2 peripheral ========== +AT91C_SSC2_PTCR EQU (0xFFFD8120) ;- (PDC_SSC2) PDC Transfer Control Register +AT91C_SSC2_TNPR EQU (0xFFFD8118) ;- (PDC_SSC2) Transmit Next Pointer Register +AT91C_SSC2_RNPR EQU (0xFFFD8110) ;- (PDC_SSC2) Receive Next Pointer Register +AT91C_SSC2_TPR EQU (0xFFFD8108) ;- (PDC_SSC2) Transmit Pointer Register +AT91C_SSC2_RPR EQU (0xFFFD8100) ;- (PDC_SSC2) Receive Pointer Register +AT91C_SSC2_PTSR EQU (0xFFFD8124) ;- (PDC_SSC2) PDC Transfer Status Register +AT91C_SSC2_TNCR EQU (0xFFFD811C) ;- (PDC_SSC2) Transmit Next Counter Register +AT91C_SSC2_RNCR EQU (0xFFFD8114) ;- (PDC_SSC2) Receive Next Counter Register +AT91C_SSC2_TCR EQU (0xFFFD810C) ;- (PDC_SSC2) Transmit Counter Register +AT91C_SSC2_RCR EQU (0xFFFD8104) ;- (PDC_SSC2) Receive Counter Register +;- ========== Register definition for SSC2 peripheral ========== +AT91C_SSC2_IMR EQU (0xFFFD804C) ;- (SSC2) Interrupt Mask Register +AT91C_SSC2_IER EQU (0xFFFD8044) ;- (SSC2) Interrupt Enable Register +AT91C_SSC2_RC1R EQU (0xFFFD803C) ;- (SSC2) Receive Compare 1 Register +AT91C_SSC2_TSHR EQU (0xFFFD8034) ;- (SSC2) Transmit Sync Holding Register +AT91C_SSC2_CMR EQU (0xFFFD8004) ;- (SSC2) Clock Mode Register +AT91C_SSC2_IDR EQU (0xFFFD8048) ;- (SSC2) Interrupt Disable Register +AT91C_SSC2_TCMR EQU (0xFFFD8018) ;- (SSC2) Transmit Clock Mode Register +AT91C_SSC2_RCMR EQU (0xFFFD8010) ;- (SSC2) Receive Clock ModeRegister +AT91C_SSC2_CR EQU (0xFFFD8000) ;- (SSC2) Control Register +AT91C_SSC2_RFMR EQU (0xFFFD8014) ;- (SSC2) Receive Frame Mode Register +AT91C_SSC2_TFMR EQU (0xFFFD801C) ;- (SSC2) Transmit Frame Mode Register +AT91C_SSC2_THR EQU (0xFFFD8024) ;- (SSC2) Transmit Holding Register +AT91C_SSC2_SR EQU (0xFFFD8040) ;- (SSC2) Status Register +AT91C_SSC2_RC0R EQU (0xFFFD8038) ;- (SSC2) Receive Compare 0 Register +AT91C_SSC2_RSHR EQU (0xFFFD8030) ;- (SSC2) Receive Sync Holding Register +AT91C_SSC2_RHR EQU (0xFFFD8020) ;- (SSC2) Receive Holding Register +;- ========== Register definition for PDC_SSC1 peripheral ========== +AT91C_SSC1_PTCR EQU (0xFFFD4120) ;- (PDC_SSC1) PDC Transfer Control Register +AT91C_SSC1_TNPR EQU (0xFFFD4118) ;- (PDC_SSC1) Transmit Next Pointer Register +AT91C_SSC1_RNPR EQU (0xFFFD4110) ;- (PDC_SSC1) Receive Next Pointer Register +AT91C_SSC1_TPR EQU (0xFFFD4108) ;- (PDC_SSC1) Transmit Pointer Register +AT91C_SSC1_RPR EQU (0xFFFD4100) ;- (PDC_SSC1) Receive Pointer Register +AT91C_SSC1_PTSR EQU (0xFFFD4124) ;- (PDC_SSC1) PDC Transfer Status Register +AT91C_SSC1_TNCR EQU (0xFFFD411C) ;- (PDC_SSC1) Transmit Next Counter Register +AT91C_SSC1_RNCR EQU (0xFFFD4114) ;- (PDC_SSC1) Receive Next Counter Register +AT91C_SSC1_TCR EQU (0xFFFD410C) ;- (PDC_SSC1) Transmit Counter Register +AT91C_SSC1_RCR EQU (0xFFFD4104) ;- (PDC_SSC1) Receive Counter Register +;- ========== Register definition for SSC1 peripheral ========== +AT91C_SSC1_RFMR EQU (0xFFFD4014) ;- (SSC1) Receive Frame Mode Register +AT91C_SSC1_CMR EQU (0xFFFD4004) ;- (SSC1) Clock Mode Register +AT91C_SSC1_IDR EQU (0xFFFD4048) ;- (SSC1) Interrupt Disable Register +AT91C_SSC1_SR EQU (0xFFFD4040) ;- (SSC1) Status Register +AT91C_SSC1_RC0R EQU (0xFFFD4038) ;- (SSC1) Receive Compare 0 Register +AT91C_SSC1_RSHR EQU (0xFFFD4030) ;- (SSC1) Receive Sync Holding Register +AT91C_SSC1_RHR EQU (0xFFFD4020) ;- (SSC1) Receive Holding Register +AT91C_SSC1_TCMR EQU (0xFFFD4018) ;- (SSC1) Transmit Clock Mode Register +AT91C_SSC1_RCMR EQU (0xFFFD4010) ;- (SSC1) Receive Clock ModeRegister +AT91C_SSC1_CR EQU (0xFFFD4000) ;- (SSC1) Control Register +AT91C_SSC1_IMR EQU (0xFFFD404C) ;- (SSC1) Interrupt Mask Register +AT91C_SSC1_IER EQU (0xFFFD4044) ;- (SSC1) Interrupt Enable Register +AT91C_SSC1_RC1R EQU (0xFFFD403C) ;- (SSC1) Receive Compare 1 Register +AT91C_SSC1_TSHR EQU (0xFFFD4034) ;- (SSC1) Transmit Sync Holding Register +AT91C_SSC1_THR EQU (0xFFFD4024) ;- (SSC1) Transmit Holding Register +AT91C_SSC1_TFMR EQU (0xFFFD401C) ;- (SSC1) Transmit Frame Mode Register +;- ========== Register definition for PDC_SSC0 peripheral ========== +AT91C_SSC0_PTCR EQU (0xFFFD0120) ;- (PDC_SSC0) PDC Transfer Control Register +AT91C_SSC0_TNPR EQU (0xFFFD0118) ;- (PDC_SSC0) Transmit Next Pointer Register +AT91C_SSC0_RNPR EQU (0xFFFD0110) ;- (PDC_SSC0) Receive Next Pointer Register +AT91C_SSC0_TPR EQU (0xFFFD0108) ;- (PDC_SSC0) Transmit Pointer Register +AT91C_SSC0_RPR EQU (0xFFFD0100) ;- (PDC_SSC0) Receive Pointer Register +AT91C_SSC0_PTSR EQU (0xFFFD0124) ;- (PDC_SSC0) PDC Transfer Status Register +AT91C_SSC0_TNCR EQU (0xFFFD011C) ;- (PDC_SSC0) Transmit Next Counter Register +AT91C_SSC0_RNCR EQU (0xFFFD0114) ;- (PDC_SSC0) Receive Next Counter Register +AT91C_SSC0_TCR EQU (0xFFFD010C) ;- (PDC_SSC0) Transmit Counter Register +AT91C_SSC0_RCR EQU (0xFFFD0104) ;- (PDC_SSC0) Receive Counter Register +;- ========== Register definition for SSC0 peripheral ========== +AT91C_SSC0_IMR EQU (0xFFFD004C) ;- (SSC0) Interrupt Mask Register +AT91C_SSC0_IER EQU (0xFFFD0044) ;- (SSC0) Interrupt Enable Register +AT91C_SSC0_RC1R EQU (0xFFFD003C) ;- (SSC0) Receive Compare 1 Register +AT91C_SSC0_TSHR EQU (0xFFFD0034) ;- (SSC0) Transmit Sync Holding Register +AT91C_SSC0_THR EQU (0xFFFD0024) ;- (SSC0) Transmit Holding Register +AT91C_SSC0_TFMR EQU (0xFFFD001C) ;- (SSC0) Transmit Frame Mode Register +AT91C_SSC0_RFMR EQU (0xFFFD0014) ;- (SSC0) Receive Frame Mode Register +AT91C_SSC0_CMR EQU (0xFFFD0004) ;- (SSC0) Clock Mode Register +AT91C_SSC0_IDR EQU (0xFFFD0048) ;- (SSC0) Interrupt Disable Register +AT91C_SSC0_SR EQU (0xFFFD0040) ;- (SSC0) Status Register +AT91C_SSC0_RC0R EQU (0xFFFD0038) ;- (SSC0) Receive Compare 0 Register +AT91C_SSC0_RSHR EQU (0xFFFD0030) ;- (SSC0) Receive Sync Holding Register +AT91C_SSC0_RHR EQU (0xFFFD0020) ;- (SSC0) Receive Holding Register +AT91C_SSC0_TCMR EQU (0xFFFD0018) ;- (SSC0) Transmit Clock Mode Register +AT91C_SSC0_RCMR EQU (0xFFFD0010) ;- (SSC0) Receive Clock ModeRegister +AT91C_SSC0_CR EQU (0xFFFD0000) ;- (SSC0) Control Register +;- ========== Register definition for PDC_US3 peripheral ========== +AT91C_US3_PTSR EQU (0xFFFCC124) ;- (PDC_US3) PDC Transfer Status Register +AT91C_US3_TNCR EQU (0xFFFCC11C) ;- (PDC_US3) Transmit Next Counter Register +AT91C_US3_RNCR EQU (0xFFFCC114) ;- (PDC_US3) Receive Next Counter Register +AT91C_US3_TCR EQU (0xFFFCC10C) ;- (PDC_US3) Transmit Counter Register +AT91C_US3_RCR EQU (0xFFFCC104) ;- (PDC_US3) Receive Counter Register +AT91C_US3_PTCR EQU (0xFFFCC120) ;- (PDC_US3) PDC Transfer Control Register +AT91C_US3_TNPR EQU (0xFFFCC118) ;- (PDC_US3) Transmit Next Pointer Register +AT91C_US3_RNPR EQU (0xFFFCC110) ;- (PDC_US3) Receive Next Pointer Register +AT91C_US3_TPR EQU (0xFFFCC108) ;- (PDC_US3) Transmit Pointer Register +AT91C_US3_RPR EQU (0xFFFCC100) ;- (PDC_US3) Receive Pointer Register +;- ========== Register definition for US3 peripheral ========== +AT91C_US3_IF EQU (0xFFFCC04C) ;- (US3) IRDA_FILTER Register +AT91C_US3_NER EQU (0xFFFCC044) ;- (US3) Nb Errors Register +AT91C_US3_RTOR EQU (0xFFFCC024) ;- (US3) Receiver Time-out Register +AT91C_US3_THR EQU (0xFFFCC01C) ;- (US3) Transmitter Holding Register +AT91C_US3_CSR EQU (0xFFFCC014) ;- (US3) Channel Status Register +AT91C_US3_IDR EQU (0xFFFCC00C) ;- (US3) Interrupt Disable Register +AT91C_US3_MR EQU (0xFFFCC004) ;- (US3) Mode Register +AT91C_US3_XXR EQU (0xFFFCC048) ;- (US3) XON_XOFF Register +AT91C_US3_FIDI EQU (0xFFFCC040) ;- (US3) FI_DI_Ratio Register +AT91C_US3_TTGR EQU (0xFFFCC028) ;- (US3) Transmitter Time-guard Register +AT91C_US3_BRGR EQU (0xFFFCC020) ;- (US3) Baud Rate Generator Register +AT91C_US3_RHR EQU (0xFFFCC018) ;- (US3) Receiver Holding Register +AT91C_US3_IMR EQU (0xFFFCC010) ;- (US3) Interrupt Mask Register +AT91C_US3_IER EQU (0xFFFCC008) ;- (US3) Interrupt Enable Register +AT91C_US3_CR EQU (0xFFFCC000) ;- (US3) Control Register +;- ========== Register definition for PDC_US2 peripheral ========== +AT91C_US2_PTSR EQU (0xFFFC8124) ;- (PDC_US2) PDC Transfer Status Register +AT91C_US2_TNCR EQU (0xFFFC811C) ;- (PDC_US2) Transmit Next Counter Register +AT91C_US2_RNCR EQU (0xFFFC8114) ;- (PDC_US2) Receive Next Counter Register +AT91C_US2_TCR EQU (0xFFFC810C) ;- (PDC_US2) Transmit Counter Register +AT91C_US2_PTCR EQU (0xFFFC8120) ;- (PDC_US2) PDC Transfer Control Register +AT91C_US2_RCR EQU (0xFFFC8104) ;- (PDC_US2) Receive Counter Register +AT91C_US2_TNPR EQU (0xFFFC8118) ;- (PDC_US2) Transmit Next Pointer Register +AT91C_US2_RPR EQU (0xFFFC8100) ;- (PDC_US2) Receive Pointer Register +AT91C_US2_TPR EQU (0xFFFC8108) ;- (PDC_US2) Transmit Pointer Register +AT91C_US2_RNPR EQU (0xFFFC8110) ;- (PDC_US2) Receive Next Pointer Register +;- ========== Register definition for US2 peripheral ========== +AT91C_US2_XXR EQU (0xFFFC8048) ;- (US2) XON_XOFF Register +AT91C_US2_FIDI EQU (0xFFFC8040) ;- (US2) FI_DI_Ratio Register +AT91C_US2_TTGR EQU (0xFFFC8028) ;- (US2) Transmitter Time-guard Register +AT91C_US2_BRGR EQU (0xFFFC8020) ;- (US2) Baud Rate Generator Register +AT91C_US2_RHR EQU (0xFFFC8018) ;- (US2) Receiver Holding Register +AT91C_US2_IMR EQU (0xFFFC8010) ;- (US2) Interrupt Mask Register +AT91C_US2_IER EQU (0xFFFC8008) ;- (US2) Interrupt Enable Register +AT91C_US2_CR EQU (0xFFFC8000) ;- (US2) Control Register +AT91C_US2_IF EQU (0xFFFC804C) ;- (US2) IRDA_FILTER Register +AT91C_US2_NER EQU (0xFFFC8044) ;- (US2) Nb Errors Register +AT91C_US2_RTOR EQU (0xFFFC8024) ;- (US2) Receiver Time-out Register +AT91C_US2_THR EQU (0xFFFC801C) ;- (US2) Transmitter Holding Register +AT91C_US2_CSR EQU (0xFFFC8014) ;- (US2) Channel Status Register +AT91C_US2_IDR EQU (0xFFFC800C) ;- (US2) Interrupt Disable Register +AT91C_US2_MR EQU (0xFFFC8004) ;- (US2) Mode Register +;- ========== Register definition for PDC_US1 peripheral ========== +AT91C_US1_PTSR EQU (0xFFFC4124) ;- (PDC_US1) PDC Transfer Status Register +AT91C_US1_TNCR EQU (0xFFFC411C) ;- (PDC_US1) Transmit Next Counter Register +AT91C_US1_RNCR EQU (0xFFFC4114) ;- (PDC_US1) Receive Next Counter Register +AT91C_US1_TCR EQU (0xFFFC410C) ;- (PDC_US1) Transmit Counter Register +AT91C_US1_RCR EQU (0xFFFC4104) ;- (PDC_US1) Receive Counter Register +AT91C_US1_PTCR EQU (0xFFFC4120) ;- (PDC_US1) PDC Transfer Control Register +AT91C_US1_TNPR EQU (0xFFFC4118) ;- (PDC_US1) Transmit Next Pointer Register +AT91C_US1_RNPR EQU (0xFFFC4110) ;- (PDC_US1) Receive Next Pointer Register +AT91C_US1_TPR EQU (0xFFFC4108) ;- (PDC_US1) Transmit Pointer Register +AT91C_US1_RPR EQU (0xFFFC4100) ;- (PDC_US1) Receive Pointer Register +;- ========== Register definition for US1 peripheral ========== +AT91C_US1_XXR EQU (0xFFFC4048) ;- (US1) XON_XOFF Register +AT91C_US1_RHR EQU (0xFFFC4018) ;- (US1) Receiver Holding Register +AT91C_US1_IMR EQU (0xFFFC4010) ;- (US1) Interrupt Mask Register +AT91C_US1_IER EQU (0xFFFC4008) ;- (US1) Interrupt Enable Register +AT91C_US1_CR EQU (0xFFFC4000) ;- (US1) Control Register +AT91C_US1_RTOR EQU (0xFFFC4024) ;- (US1) Receiver Time-out Register +AT91C_US1_THR EQU (0xFFFC401C) ;- (US1) Transmitter Holding Register +AT91C_US1_CSR EQU (0xFFFC4014) ;- (US1) Channel Status Register +AT91C_US1_IDR EQU (0xFFFC400C) ;- (US1) Interrupt Disable Register +AT91C_US1_FIDI EQU (0xFFFC4040) ;- (US1) FI_DI_Ratio Register +AT91C_US1_BRGR EQU (0xFFFC4020) ;- (US1) Baud Rate Generator Register +AT91C_US1_TTGR EQU (0xFFFC4028) ;- (US1) Transmitter Time-guard Register +AT91C_US1_IF EQU (0xFFFC404C) ;- (US1) IRDA_FILTER Register +AT91C_US1_NER EQU (0xFFFC4044) ;- (US1) Nb Errors Register +AT91C_US1_MR EQU (0xFFFC4004) ;- (US1) Mode Register +;- ========== Register definition for PDC_US0 peripheral ========== +AT91C_US0_PTCR EQU (0xFFFC0120) ;- (PDC_US0) PDC Transfer Control Register +AT91C_US0_TNPR EQU (0xFFFC0118) ;- (PDC_US0) Transmit Next Pointer Register +AT91C_US0_RNPR EQU (0xFFFC0110) ;- (PDC_US0) Receive Next Pointer Register +AT91C_US0_TPR EQU (0xFFFC0108) ;- (PDC_US0) Transmit Pointer Register +AT91C_US0_RPR EQU (0xFFFC0100) ;- (PDC_US0) Receive Pointer Register +AT91C_US0_PTSR EQU (0xFFFC0124) ;- (PDC_US0) PDC Transfer Status Register +AT91C_US0_TNCR EQU (0xFFFC011C) ;- (PDC_US0) Transmit Next Counter Register +AT91C_US0_RNCR EQU (0xFFFC0114) ;- (PDC_US0) Receive Next Counter Register +AT91C_US0_TCR EQU (0xFFFC010C) ;- (PDC_US0) Transmit Counter Register +AT91C_US0_RCR EQU (0xFFFC0104) ;- (PDC_US0) Receive Counter Register +;- ========== Register definition for US0 peripheral ========== +AT91C_US0_TTGR EQU (0xFFFC0028) ;- (US0) Transmitter Time-guard Register +AT91C_US0_BRGR EQU (0xFFFC0020) ;- (US0) Baud Rate Generator Register +AT91C_US0_RHR EQU (0xFFFC0018) ;- (US0) Receiver Holding Register +AT91C_US0_IMR EQU (0xFFFC0010) ;- (US0) Interrupt Mask Register +AT91C_US0_NER EQU (0xFFFC0044) ;- (US0) Nb Errors Register +AT91C_US0_RTOR EQU (0xFFFC0024) ;- (US0) Receiver Time-out Register +AT91C_US0_XXR EQU (0xFFFC0048) ;- (US0) XON_XOFF Register +AT91C_US0_FIDI EQU (0xFFFC0040) ;- (US0) FI_DI_Ratio Register +AT91C_US0_CR EQU (0xFFFC0000) ;- (US0) Control Register +AT91C_US0_IER EQU (0xFFFC0008) ;- (US0) Interrupt Enable Register +AT91C_US0_IF EQU (0xFFFC004C) ;- (US0) IRDA_FILTER Register +AT91C_US0_MR EQU (0xFFFC0004) ;- (US0) Mode Register +AT91C_US0_IDR EQU (0xFFFC000C) ;- (US0) Interrupt Disable Register +AT91C_US0_CSR EQU (0xFFFC0014) ;- (US0) Channel Status Register +AT91C_US0_THR EQU (0xFFFC001C) ;- (US0) Transmitter Holding Register +;- ========== Register definition for TWI peripheral ========== +AT91C_TWI_RHR EQU (0xFFFB8030) ;- (TWI) Receive Holding Register +AT91C_TWI_IDR EQU (0xFFFB8028) ;- (TWI) Interrupt Disable Register +AT91C_TWI_SR EQU (0xFFFB8020) ;- (TWI) Status Register +AT91C_TWI_CWGR EQU (0xFFFB8010) ;- (TWI) Clock Waveform Generator Register +AT91C_TWI_SMR EQU (0xFFFB8008) ;- (TWI) Slave Mode Register +AT91C_TWI_CR EQU (0xFFFB8000) ;- (TWI) Control Register +AT91C_TWI_THR EQU (0xFFFB8034) ;- (TWI) Transmit Holding Register +AT91C_TWI_IMR EQU (0xFFFB802C) ;- (TWI) Interrupt Mask Register +AT91C_TWI_IER EQU (0xFFFB8024) ;- (TWI) Interrupt Enable Register +AT91C_TWI_IADR EQU (0xFFFB800C) ;- (TWI) Internal Address Register +AT91C_TWI_MMR EQU (0xFFFB8004) ;- (TWI) Master Mode Register +;- ========== Register definition for PDC_MCI peripheral ========== +AT91C_MCI_PTCR EQU (0xFFFB4120) ;- (PDC_MCI) PDC Transfer Control Register +AT91C_MCI_TNPR EQU (0xFFFB4118) ;- (PDC_MCI) Transmit Next Pointer Register +AT91C_MCI_RNPR EQU (0xFFFB4110) ;- (PDC_MCI) Receive Next Pointer Register +AT91C_MCI_TPR EQU (0xFFFB4108) ;- (PDC_MCI) Transmit Pointer Register +AT91C_MCI_RPR EQU (0xFFFB4100) ;- (PDC_MCI) Receive Pointer Register +AT91C_MCI_PTSR EQU (0xFFFB4124) ;- (PDC_MCI) PDC Transfer Status Register +AT91C_MCI_TNCR EQU (0xFFFB411C) ;- (PDC_MCI) Transmit Next Counter Register +AT91C_MCI_RNCR EQU (0xFFFB4114) ;- (PDC_MCI) Receive Next Counter Register +AT91C_MCI_TCR EQU (0xFFFB410C) ;- (PDC_MCI) Transmit Counter Register +AT91C_MCI_RCR EQU (0xFFFB4104) ;- (PDC_MCI) Receive Counter Register +;- ========== Register definition for MCI peripheral ========== +AT91C_MCI_IDR EQU (0xFFFB4048) ;- (MCI) MCI Interrupt Disable Register +AT91C_MCI_SR EQU (0xFFFB4040) ;- (MCI) MCI Status Register +AT91C_MCI_RDR EQU (0xFFFB4030) ;- (MCI) MCI Receive Data Register +AT91C_MCI_RSPR EQU (0xFFFB4020) ;- (MCI) MCI Response Register +AT91C_MCI_ARGR EQU (0xFFFB4010) ;- (MCI) MCI Argument Register +AT91C_MCI_DTOR EQU (0xFFFB4008) ;- (MCI) MCI Data Timeout Register +AT91C_MCI_CR EQU (0xFFFB4000) ;- (MCI) MCI Control Register +AT91C_MCI_IMR EQU (0xFFFB404C) ;- (MCI) MCI Interrupt Mask Register +AT91C_MCI_IER EQU (0xFFFB4044) ;- (MCI) MCI Interrupt Enable Register +AT91C_MCI_TDR EQU (0xFFFB4034) ;- (MCI) MCI Transmit Data Register +AT91C_MCI_CMDR EQU (0xFFFB4014) ;- (MCI) MCI Command Register +AT91C_MCI_SDCR EQU (0xFFFB400C) ;- (MCI) MCI SD Card Register +AT91C_MCI_MR EQU (0xFFFB4004) ;- (MCI) MCI Mode Register +;- ========== Register definition for UDP peripheral ========== +AT91C_UDP_ISR EQU (0xFFFB001C) ;- (UDP) Interrupt Status Register +AT91C_UDP_IDR EQU (0xFFFB0014) ;- (UDP) Interrupt Disable Register +AT91C_UDP_GLBSTATE EQU (0xFFFB0004) ;- (UDP) Global State Register +AT91C_UDP_FDR EQU (0xFFFB0050) ;- (UDP) Endpoint FIFO Data Register +AT91C_UDP_CSR EQU (0xFFFB0030) ;- (UDP) Endpoint Control and Status Register +AT91C_UDP_RSTEP EQU (0xFFFB0028) ;- (UDP) Reset Endpoint Register +AT91C_UDP_ICR EQU (0xFFFB0020) ;- (UDP) Interrupt Clear Register +AT91C_UDP_IMR EQU (0xFFFB0018) ;- (UDP) Interrupt Mask Register +AT91C_UDP_IER EQU (0xFFFB0010) ;- (UDP) Interrupt Enable Register +AT91C_UDP_FADDR EQU (0xFFFB0008) ;- (UDP) Function Address Register +AT91C_UDP_NUM EQU (0xFFFB0000) ;- (UDP) Frame Number Register +;- ========== Register definition for TC5 peripheral ========== +AT91C_TC5_CMR EQU (0xFFFA4084) ;- (TC5) Channel Mode Register +AT91C_TC5_IDR EQU (0xFFFA40A8) ;- (TC5) Interrupt Disable Register +AT91C_TC5_SR EQU (0xFFFA40A0) ;- (TC5) Status Register +AT91C_TC5_RB EQU (0xFFFA4098) ;- (TC5) Register B +AT91C_TC5_CV EQU (0xFFFA4090) ;- (TC5) Counter Value +AT91C_TC5_CCR EQU (0xFFFA4080) ;- (TC5) Channel Control Register +AT91C_TC5_IMR EQU (0xFFFA40AC) ;- (TC5) Interrupt Mask Register +AT91C_TC5_IER EQU (0xFFFA40A4) ;- (TC5) Interrupt Enable Register +AT91C_TC5_RC EQU (0xFFFA409C) ;- (TC5) Register C +AT91C_TC5_RA EQU (0xFFFA4094) ;- (TC5) Register A +;- ========== Register definition for TC4 peripheral ========== +AT91C_TC4_IMR EQU (0xFFFA406C) ;- (TC4) Interrupt Mask Register +AT91C_TC4_IER EQU (0xFFFA4064) ;- (TC4) Interrupt Enable Register +AT91C_TC4_RC EQU (0xFFFA405C) ;- (TC4) Register C +AT91C_TC4_RA EQU (0xFFFA4054) ;- (TC4) Register A +AT91C_TC4_CMR EQU (0xFFFA4044) ;- (TC4) Channel Mode Register +AT91C_TC4_IDR EQU (0xFFFA4068) ;- (TC4) Interrupt Disable Register +AT91C_TC4_SR EQU (0xFFFA4060) ;- (TC4) Status Register +AT91C_TC4_RB EQU (0xFFFA4058) ;- (TC4) Register B +AT91C_TC4_CV EQU (0xFFFA4050) ;- (TC4) Counter Value +AT91C_TC4_CCR EQU (0xFFFA4040) ;- (TC4) Channel Control Register +;- ========== Register definition for TC3 peripheral ========== +AT91C_TC3_IMR EQU (0xFFFA402C) ;- (TC3) Interrupt Mask Register +AT91C_TC3_CV EQU (0xFFFA4010) ;- (TC3) Counter Value +AT91C_TC3_CCR EQU (0xFFFA4000) ;- (TC3) Channel Control Register +AT91C_TC3_IER EQU (0xFFFA4024) ;- (TC3) Interrupt Enable Register +AT91C_TC3_CMR EQU (0xFFFA4004) ;- (TC3) Channel Mode Register +AT91C_TC3_RA EQU (0xFFFA4014) ;- (TC3) Register A +AT91C_TC3_RC EQU (0xFFFA401C) ;- (TC3) Register C +AT91C_TC3_IDR EQU (0xFFFA4028) ;- (TC3) Interrupt Disable Register +AT91C_TC3_RB EQU (0xFFFA4018) ;- (TC3) Register B +AT91C_TC3_SR EQU (0xFFFA4020) ;- (TC3) Status Register +;- ========== Register definition for TCB1 peripheral ========== +AT91C_TCB1_BCR EQU (0xFFFA4140) ;- (TCB1) TC Block Control Register +AT91C_TCB1_BMR EQU (0xFFFA4144) ;- (TCB1) TC Block Mode Register +;- ========== Register definition for TC2 peripheral ========== +AT91C_TC2_IMR EQU (0xFFFA00AC) ;- (TC2) Interrupt Mask Register +AT91C_TC2_IER EQU (0xFFFA00A4) ;- (TC2) Interrupt Enable Register +AT91C_TC2_RC EQU (0xFFFA009C) ;- (TC2) Register C +AT91C_TC2_RA EQU (0xFFFA0094) ;- (TC2) Register A +AT91C_TC2_CMR EQU (0xFFFA0084) ;- (TC2) Channel Mode Register +AT91C_TC2_IDR EQU (0xFFFA00A8) ;- (TC2) Interrupt Disable Register +AT91C_TC2_SR EQU (0xFFFA00A0) ;- (TC2) Status Register +AT91C_TC2_RB EQU (0xFFFA0098) ;- (TC2) Register B +AT91C_TC2_CV EQU (0xFFFA0090) ;- (TC2) Counter Value +AT91C_TC2_CCR EQU (0xFFFA0080) ;- (TC2) Channel Control Register +;- ========== Register definition for TC1 peripheral ========== +AT91C_TC1_IMR EQU (0xFFFA006C) ;- (TC1) Interrupt Mask Register +AT91C_TC1_IER EQU (0xFFFA0064) ;- (TC1) Interrupt Enable Register +AT91C_TC1_RC EQU (0xFFFA005C) ;- (TC1) Register C +AT91C_TC1_RA EQU (0xFFFA0054) ;- (TC1) Register A +AT91C_TC1_CMR EQU (0xFFFA0044) ;- (TC1) Channel Mode Register +AT91C_TC1_IDR EQU (0xFFFA0068) ;- (TC1) Interrupt Disable Register +AT91C_TC1_SR EQU (0xFFFA0060) ;- (TC1) Status Register +AT91C_TC1_RB EQU (0xFFFA0058) ;- (TC1) Register B +AT91C_TC1_CV EQU (0xFFFA0050) ;- (TC1) Counter Value +AT91C_TC1_CCR EQU (0xFFFA0040) ;- (TC1) Channel Control Register +;- ========== Register definition for TC0 peripheral ========== +AT91C_TC0_IMR EQU (0xFFFA002C) ;- (TC0) Interrupt Mask Register +AT91C_TC0_IER EQU (0xFFFA0024) ;- (TC0) Interrupt Enable Register +AT91C_TC0_RC EQU (0xFFFA001C) ;- (TC0) Register C +AT91C_TC0_RA EQU (0xFFFA0014) ;- (TC0) Register A +AT91C_TC0_CMR EQU (0xFFFA0004) ;- (TC0) Channel Mode Register +AT91C_TC0_IDR EQU (0xFFFA0028) ;- (TC0) Interrupt Disable Register +AT91C_TC0_SR EQU (0xFFFA0020) ;- (TC0) Status Register +AT91C_TC0_RB EQU (0xFFFA0018) ;- (TC0) Register B +AT91C_TC0_CV EQU (0xFFFA0010) ;- (TC0) Counter Value +AT91C_TC0_CCR EQU (0xFFFA0000) ;- (TC0) Channel Control Register +;- ========== Register definition for TCB0 peripheral ========== +AT91C_TCB0_BMR EQU (0xFFFA00C4) ;- (TCB0) TC Block Mode Register +AT91C_TCB0_BCR EQU (0xFFFA00C0) ;- (TCB0) TC Block Control Register +;- ========== Register definition for UHP peripheral ========== +AT91C_UHP_HcRhDescriptorA EQU (0x00300048) ;- (UHP) Root Hub characteristics A +AT91C_UHP_HcRhPortStatus EQU (0x00300054) ;- (UHP) Root Hub Port Status Register +AT91C_UHP_HcRhDescriptorB EQU (0x0030004C) ;- (UHP) Root Hub characteristics B +AT91C_UHP_HcControl EQU (0x00300004) ;- (UHP) Operating modes for the Host Controller +AT91C_UHP_HcInterruptStatus EQU (0x0030000C) ;- (UHP) Interrupt Status Register +AT91C_UHP_HcRhStatus EQU (0x00300050) ;- (UHP) Root Hub Status register +AT91C_UHP_HcRevision EQU (0x00300000) ;- (UHP) Revision +AT91C_UHP_HcCommandStatus EQU (0x00300008) ;- (UHP) Command & status Register +AT91C_UHP_HcInterruptEnable EQU (0x00300010) ;- (UHP) Interrupt Enable Register +AT91C_UHP_HcHCCA EQU (0x00300018) ;- (UHP) Pointer to the Host Controller Communication Area +AT91C_UHP_HcControlHeadED EQU (0x00300020) ;- (UHP) First Endpoint Descriptor of the Control list +AT91C_UHP_HcInterruptDisable EQU (0x00300014) ;- (UHP) Interrupt Disable Register +AT91C_UHP_HcPeriodCurrentED EQU (0x0030001C) ;- (UHP) Current Isochronous or Interrupt Endpoint Descriptor +AT91C_UHP_HcControlCurrentED EQU (0x00300024) ;- (UHP) Endpoint Control and Status Register +AT91C_UHP_HcBulkCurrentED EQU (0x0030002C) ;- (UHP) Current endpoint of the Bulk list +AT91C_UHP_HcFmInterval EQU (0x00300034) ;- (UHP) Bit time between 2 consecutive SOFs +AT91C_UHP_HcBulkHeadED EQU (0x00300028) ;- (UHP) First endpoint register of the Bulk list +AT91C_UHP_HcBulkDoneHead EQU (0x00300030) ;- (UHP) Last completed transfer descriptor +AT91C_UHP_HcFmRemaining EQU (0x00300038) ;- (UHP) Bit time remaining in the current Frame +AT91C_UHP_HcPeriodicStart EQU (0x00300040) ;- (UHP) Periodic Start +AT91C_UHP_HcLSThreshold EQU (0x00300044) ;- (UHP) LS Threshold +AT91C_UHP_HcFmNumber EQU (0x0030003C) ;- (UHP) Frame number +;- ========== Register definition for EMAC peripheral ========== +AT91C_EMAC_RSR EQU (0xFFFBC020) ;- (EMAC) Receive Status Register +AT91C_EMAC_MAN EQU (0xFFFBC034) ;- (EMAC) PHY Maintenance Register +AT91C_EMAC_HSH EQU (0xFFFBC090) ;- (EMAC) Hash Address High[63:32] +AT91C_EMAC_MCOL EQU (0xFFFBC048) ;- (EMAC) Multiple Collision Frame Register +AT91C_EMAC_IER EQU (0xFFFBC028) ;- (EMAC) Interrupt Enable Register +AT91C_EMAC_SA2H EQU (0xFFFBC0A4) ;- (EMAC) Specific Address 2 High, Last 2 bytes +AT91C_EMAC_HSL EQU (0xFFFBC094) ;- (EMAC) Hash Address Low[31:0] +AT91C_EMAC_LCOL EQU (0xFFFBC05C) ;- (EMAC) Late Collision Register +AT91C_EMAC_OK EQU (0xFFFBC04C) ;- (EMAC) Frames Received OK Register +AT91C_EMAC_CFG EQU (0xFFFBC004) ;- (EMAC) Network Configuration Register +AT91C_EMAC_SA3L EQU (0xFFFBC0A8) ;- (EMAC) Specific Address 3 Low, First 4 bytes +AT91C_EMAC_SEQE EQU (0xFFFBC050) ;- (EMAC) Frame Check Sequence Error Register +AT91C_EMAC_ECOL EQU (0xFFFBC060) ;- (EMAC) Excessive Collision Register +AT91C_EMAC_ELR EQU (0xFFFBC070) ;- (EMAC) Excessive Length Error Register +AT91C_EMAC_SR EQU (0xFFFBC008) ;- (EMAC) Network Status Register +AT91C_EMAC_RBQP EQU (0xFFFBC018) ;- (EMAC) Receive Buffer Queue Pointer +AT91C_EMAC_CSE EQU (0xFFFBC064) ;- (EMAC) Carrier Sense Error Register +AT91C_EMAC_RJB EQU (0xFFFBC074) ;- (EMAC) Receive Jabber Register +AT91C_EMAC_USF EQU (0xFFFBC078) ;- (EMAC) Undersize Frame Register +AT91C_EMAC_IDR EQU (0xFFFBC02C) ;- (EMAC) Interrupt Disable Register +AT91C_EMAC_SA1L EQU (0xFFFBC098) ;- (EMAC) Specific Address 1 Low, First 4 bytes +AT91C_EMAC_IMR EQU (0xFFFBC030) ;- (EMAC) Interrupt Mask Register +AT91C_EMAC_FRA EQU (0xFFFBC040) ;- (EMAC) Frames Transmitted OK Register +AT91C_EMAC_SA3H EQU (0xFFFBC0AC) ;- (EMAC) Specific Address 3 High, Last 2 bytes +AT91C_EMAC_SA1H EQU (0xFFFBC09C) ;- (EMAC) Specific Address 1 High, Last 2 bytes +AT91C_EMAC_SCOL EQU (0xFFFBC044) ;- (EMAC) Single Collision Frame Register +AT91C_EMAC_ALE EQU (0xFFFBC054) ;- (EMAC) Alignment Error Register +AT91C_EMAC_TAR EQU (0xFFFBC00C) ;- (EMAC) Transmit Address Register +AT91C_EMAC_SA4L EQU (0xFFFBC0B0) ;- (EMAC) Specific Address 4 Low, First 4 bytes +AT91C_EMAC_SA2L EQU (0xFFFBC0A0) ;- (EMAC) Specific Address 2 Low, First 4 bytes +AT91C_EMAC_TUE EQU (0xFFFBC068) ;- (EMAC) Transmit Underrun Error Register +AT91C_EMAC_DTE EQU (0xFFFBC058) ;- (EMAC) Deferred Transmission Frame Register +AT91C_EMAC_TCR EQU (0xFFFBC010) ;- (EMAC) Transmit Control Register +AT91C_EMAC_CTL EQU (0xFFFBC000) ;- (EMAC) Network Control Register +AT91C_EMAC_SA4H EQU (0xFFFBC0B4) ;- (EMAC) Specific Address 4 High, Last 2 bytesr +AT91C_EMAC_CDE EQU (0xFFFBC06C) ;- (EMAC) Code Error Register +AT91C_EMAC_SQEE EQU (0xFFFBC07C) ;- (EMAC) SQE Test Error Register +AT91C_EMAC_TSR EQU (0xFFFBC014) ;- (EMAC) Transmit Status Register +AT91C_EMAC_DRFC EQU (0xFFFBC080) ;- (EMAC) Discarded RX Frame Register +;- ========== Register definition for EBI peripheral ========== +AT91C_EBI_CFGR EQU (0xFFFFFF64) ;- (EBI) Configuration Register +AT91C_EBI_CSA EQU (0xFFFFFF60) ;- (EBI) Chip Select Assignment Register +;- ========== Register definition for SMC2 peripheral ========== +AT91C_SMC2_CSR EQU (0xFFFFFF70) ;- (SMC2) SMC2 Chip Select Register +;- ========== Register definition for SDRC peripheral ========== +AT91C_SDRC_IMR EQU (0xFFFFFFAC) ;- (SDRC) SDRAM Controller Interrupt Mask Register +AT91C_SDRC_IER EQU (0xFFFFFFA4) ;- (SDRC) SDRAM Controller Interrupt Enable Register +AT91C_SDRC_SRR EQU (0xFFFFFF9C) ;- (SDRC) SDRAM Controller Self Refresh Register +AT91C_SDRC_TR EQU (0xFFFFFF94) ;- (SDRC) SDRAM Controller Refresh Timer Register +AT91C_SDRC_ISR EQU (0xFFFFFFB0) ;- (SDRC) SDRAM Controller Interrupt Mask Register +AT91C_SDRC_IDR EQU (0xFFFFFFA8) ;- (SDRC) SDRAM Controller Interrupt Disable Register +AT91C_SDRC_LPR EQU (0xFFFFFFA0) ;- (SDRC) SDRAM Controller Low Power Register +AT91C_SDRC_CR EQU (0xFFFFFF98) ;- (SDRC) SDRAM Controller Configuration Register +AT91C_SDRC_MR EQU (0xFFFFFF90) ;- (SDRC) SDRAM Controller Mode Register +;- ========== Register definition for BFC peripheral ========== +AT91C_BFC_MR EQU (0xFFFFFFC0) ;- (BFC) BFC Mode Register + +;- ***************************************************************************** +;- PIO DEFINITIONS FOR AT91RM9200 +;- ***************************************************************************** +AT91C_PIO_PA0 EQU (1:SHL:0) ;- Pin Controlled by PA0 +AT91C_PA0_MISO EQU (AT91C_PIO_PA0) ;- SPI Master In Slave +AT91C_PA0_PCK3 EQU (AT91C_PIO_PA0) ;- PMC Programmable Clock Output 3 +AT91C_PIO_PA1 EQU (1:SHL:1) ;- Pin Controlled by PA1 +AT91C_PA1_MOSI EQU (AT91C_PIO_PA1) ;- SPI Master Out Slave +AT91C_PA1_PCK0 EQU (AT91C_PIO_PA1) ;- PMC Programmable Clock Output 0 +AT91C_PIO_PA10 EQU (1:SHL:10) ;- Pin Controlled by PA10 +AT91C_PA10_ETX1 EQU (AT91C_PIO_PA10) ;- Ethernet MAC Transmit Data 1 +AT91C_PA10_MCDB1 EQU (AT91C_PIO_PA10) ;- Multimedia Card B Data 1 +AT91C_PIO_PA11 EQU (1:SHL:11) ;- Pin Controlled by PA11 +AT91C_PA11_ECRS_ECRSDV EQU (AT91C_PIO_PA11) ;- Ethernet MAC Carrier Sense/Carrier Sense and Data Valid +AT91C_PA11_MCDB2 EQU (AT91C_PIO_PA11) ;- Multimedia Card B Data 2 +AT91C_PIO_PA12 EQU (1:SHL:12) ;- Pin Controlled by PA12 +AT91C_PA12_ERX0 EQU (AT91C_PIO_PA12) ;- Ethernet MAC Receive Data 0 +AT91C_PA12_MCDB3 EQU (AT91C_PIO_PA12) ;- Multimedia Card B Data 3 +AT91C_PIO_PA13 EQU (1:SHL:13) ;- Pin Controlled by PA13 +AT91C_PA13_ERX1 EQU (AT91C_PIO_PA13) ;- Ethernet MAC Receive Data 1 +AT91C_PA13_TCLK0 EQU (AT91C_PIO_PA13) ;- Timer Counter 0 external clock input +AT91C_PIO_PA14 EQU (1:SHL:14) ;- Pin Controlled by PA14 +AT91C_PA14_ERXER EQU (AT91C_PIO_PA14) ;- Ethernet MAC Receive Error +AT91C_PA14_TCLK1 EQU (AT91C_PIO_PA14) ;- Timer Counter 1 external clock input +AT91C_PIO_PA15 EQU (1:SHL:15) ;- Pin Controlled by PA15 +AT91C_PA15_EMDC EQU (AT91C_PIO_PA15) ;- Ethernet MAC Management Data Clock +AT91C_PA15_TCLK2 EQU (AT91C_PIO_PA15) ;- Timer Counter 2 external clock input +AT91C_PIO_PA16 EQU (1:SHL:16) ;- Pin Controlled by PA16 +AT91C_PA16_EMDIO EQU (AT91C_PIO_PA16) ;- Ethernet MAC Management Data Input/Output +AT91C_PA16_IRQ6 EQU (AT91C_PIO_PA16) ;- AIC Interrupt input 6 +AT91C_PIO_PA17 EQU (1:SHL:17) ;- Pin Controlled by PA17 +AT91C_PA17_TXD0 EQU (AT91C_PIO_PA17) ;- USART 0 Transmit Data +AT91C_PA17_TIOA0 EQU (AT91C_PIO_PA17) ;- Timer Counter 0 Multipurpose Timer I/O Pin A +AT91C_PIO_PA18 EQU (1:SHL:18) ;- Pin Controlled by PA18 +AT91C_PA18_RXD0 EQU (AT91C_PIO_PA18) ;- USART 0 Receive Data +AT91C_PA18_TIOB0 EQU (AT91C_PIO_PA18) ;- Timer Counter 0 Multipurpose Timer I/O Pin B +AT91C_PIO_PA19 EQU (1:SHL:19) ;- Pin Controlled by PA19 +AT91C_PA19_SCK0 EQU (AT91C_PIO_PA19) ;- USART 0 Serial Clock +AT91C_PA19_TIOA1 EQU (AT91C_PIO_PA19) ;- Timer Counter 1 Multipurpose Timer I/O Pin A +AT91C_PIO_PA2 EQU (1:SHL:2) ;- Pin Controlled by PA2 +AT91C_PA2_SPCK EQU (AT91C_PIO_PA2) ;- SPI Serial Clock +AT91C_PA2_IRQ4 EQU (AT91C_PIO_PA2) ;- AIC Interrupt Input 4 +AT91C_PIO_PA20 EQU (1:SHL:20) ;- Pin Controlled by PA20 +AT91C_PA20_CTS0 EQU (AT91C_PIO_PA20) ;- USART 0 Clear To Send +AT91C_PA20_TIOB1 EQU (AT91C_PIO_PA20) ;- Timer Counter 1 Multipurpose Timer I/O Pin B +AT91C_PIO_PA21 EQU (1:SHL:21) ;- Pin Controlled by PA21 +AT91C_PA21_RTS0 EQU (AT91C_PIO_PA21) ;- Usart 0 Ready To Send +AT91C_PA21_TIOA2 EQU (AT91C_PIO_PA21) ;- Timer Counter 2 Multipurpose Timer I/O Pin A +AT91C_PIO_PA22 EQU (1:SHL:22) ;- Pin Controlled by PA22 +AT91C_PA22_RXD2 EQU (AT91C_PIO_PA22) ;- USART 2 Receive Data +AT91C_PA22_TIOB2 EQU (AT91C_PIO_PA22) ;- Timer Counter 2 Multipurpose Timer I/O Pin B +AT91C_PIO_PA23 EQU (1:SHL:23) ;- Pin Controlled by PA23 +AT91C_PA23_TXD2 EQU (AT91C_PIO_PA23) ;- USART 2 Transmit Data +AT91C_PA23_IRQ3 EQU (AT91C_PIO_PA23) ;- Interrupt input 3 +AT91C_PIO_PA24 EQU (1:SHL:24) ;- Pin Controlled by PA24 +AT91C_PA24_SCK2 EQU (AT91C_PIO_PA24) ;- USART2 Serial Clock +AT91C_PA24_PCK1 EQU (AT91C_PIO_PA24) ;- PMC Programmable Clock Output 1 +AT91C_PIO_PA25 EQU (1:SHL:25) ;- Pin Controlled by PA25 +AT91C_PA25_TWD EQU (AT91C_PIO_PA25) ;- TWI Two-wire Serial Data +AT91C_PA25_IRQ2 EQU (AT91C_PIO_PA25) ;- Interrupt input 2 +AT91C_PIO_PA26 EQU (1:SHL:26) ;- Pin Controlled by PA26 +AT91C_PA26_TWCK EQU (AT91C_PIO_PA26) ;- TWI Two-wire Serial Clock +AT91C_PA26_IRQ1 EQU (AT91C_PIO_PA26) ;- Interrupt input 1 +AT91C_PIO_PA27 EQU (1:SHL:27) ;- Pin Controlled by PA27 +AT91C_PA27_MCCK EQU (AT91C_PIO_PA27) ;- Multimedia Card Clock +AT91C_PA27_TCLK3 EQU (AT91C_PIO_PA27) ;- Timer Counter 3 External Clock Input +AT91C_PIO_PA28 EQU (1:SHL:28) ;- Pin Controlled by PA28 +AT91C_PA28_MCCDA EQU (AT91C_PIO_PA28) ;- Multimedia Card A Command +AT91C_PA28_TCLK4 EQU (AT91C_PIO_PA28) ;- Timer Counter 4 external Clock Input +AT91C_PIO_PA29 EQU (1:SHL:29) ;- Pin Controlled by PA29 +AT91C_PA29_MCDA0 EQU (AT91C_PIO_PA29) ;- Multimedia Card A Data 0 +AT91C_PA29_TCLK5 EQU (AT91C_PIO_PA29) ;- Timer Counter 5 external clock input +AT91C_PIO_PA3 EQU (1:SHL:3) ;- Pin Controlled by PA3 +AT91C_PA3_NPCS0 EQU (AT91C_PIO_PA3) ;- SPI Peripheral Chip Select 0 +AT91C_PA3_IRQ5 EQU (AT91C_PIO_PA3) ;- AIC Interrupt Input 5 +AT91C_PIO_PA30 EQU (1:SHL:30) ;- Pin Controlled by PA30 +AT91C_PA30_DRXD EQU (AT91C_PIO_PA30) ;- DBGU Debug Receive Data +AT91C_PA30_CTS2 EQU (AT91C_PIO_PA30) ;- Usart 2 Clear To Send +AT91C_PIO_PA31 EQU (1:SHL:31) ;- Pin Controlled by PA31 +AT91C_PA31_DTXD EQU (AT91C_PIO_PA31) ;- DBGU Debug Transmit Data +AT91C_PA31_RTS2 EQU (AT91C_PIO_PA31) ;- USART 2 Ready To Send +AT91C_PIO_PA4 EQU (1:SHL:4) ;- Pin Controlled by PA4 +AT91C_PA4_NPCS1 EQU (AT91C_PIO_PA4) ;- SPI Peripheral Chip Select 1 +AT91C_PA4_PCK1 EQU (AT91C_PIO_PA4) ;- PMC Programmable Clock Output 1 +AT91C_PIO_PA5 EQU (1:SHL:5) ;- Pin Controlled by PA5 +AT91C_PA5_NPCS2 EQU (AT91C_PIO_PA5) ;- SPI Peripheral Chip Select 2 +AT91C_PA5_TXD3 EQU (AT91C_PIO_PA5) ;- USART 3 Transmit Data +AT91C_PIO_PA6 EQU (1:SHL:6) ;- Pin Controlled by PA6 +AT91C_PA6_NPCS3 EQU (AT91C_PIO_PA6) ;- SPI Peripheral Chip Select 3 +AT91C_PA6_RXD3 EQU (AT91C_PIO_PA6) ;- USART 3 Receive Data +AT91C_PIO_PA7 EQU (1:SHL:7) ;- Pin Controlled by PA7 +AT91C_PA7_ETXCK_EREFCK EQU (AT91C_PIO_PA7) ;- Ethernet MAC Transmit Clock/Reference Clock +AT91C_PA7_PCK2 EQU (AT91C_PIO_PA7) ;- PMC Programmable Clock 2 +AT91C_PIO_PA8 EQU (1:SHL:8) ;- Pin Controlled by PA8 +AT91C_PA8_ETXEN EQU (AT91C_PIO_PA8) ;- Ethernet MAC Transmit Enable +AT91C_PA8_MCCDB EQU (AT91C_PIO_PA8) ;- Multimedia Card B Command +AT91C_PIO_PA9 EQU (1:SHL:9) ;- Pin Controlled by PA9 +AT91C_PA9_ETX0 EQU (AT91C_PIO_PA9) ;- Ethernet MAC Transmit Data 0 +AT91C_PA9_MCDB0 EQU (AT91C_PIO_PA9) ;- Multimedia Card B Data 0 +AT91C_PIO_PB0 EQU (1:SHL:0) ;- Pin Controlled by PB0 +AT91C_PB0_TF0 EQU (AT91C_PIO_PB0) ;- SSC Transmit Frame Sync 0 +AT91C_PB0_TIOB3 EQU (AT91C_PIO_PB0) ;- Timer Counter 3 Multipurpose Timer I/O Pin B +AT91C_PIO_PB1 EQU (1:SHL:1) ;- Pin Controlled by PB1 +AT91C_PB1_TK0 EQU (AT91C_PIO_PB1) ;- SSC Transmit Clock 0 +AT91C_PB1_CTS3 EQU (AT91C_PIO_PB1) ;- USART 3 Clear To Send +AT91C_PIO_PB10 EQU (1:SHL:10) ;- Pin Controlled by PB10 +AT91C_PB10_RK1 EQU (AT91C_PIO_PB10) ;- SSC Receive Clock 1 +AT91C_PB10_TIOA5 EQU (AT91C_PIO_PB10) ;- Timer Counter 5 Multipurpose Timer I/O Pin A +AT91C_PIO_PB11 EQU (1:SHL:11) ;- Pin Controlled by PB11 +AT91C_PB11_RF1 EQU (AT91C_PIO_PB11) ;- SSC Receive Frame Sync 1 +AT91C_PB11_TIOB5 EQU (AT91C_PIO_PB11) ;- Timer Counter 5 Multipurpose Timer I/O Pin B +AT91C_PIO_PB12 EQU (1:SHL:12) ;- Pin Controlled by PB12 +AT91C_PB12_TF2 EQU (AT91C_PIO_PB12) ;- SSC Transmit Frame Sync 2 +AT91C_PB12_ETX2 EQU (AT91C_PIO_PB12) ;- Ethernet MAC Transmit Data 2 +AT91C_PIO_PB13 EQU (1:SHL:13) ;- Pin Controlled by PB13 +AT91C_PB13_TK2 EQU (AT91C_PIO_PB13) ;- SSC Transmit Clock 2 +AT91C_PB13_ETX3 EQU (AT91C_PIO_PB13) ;- Ethernet MAC Transmit Data 3 +AT91C_PIO_PB14 EQU (1:SHL:14) ;- Pin Controlled by PB14 +AT91C_PB14_TD2 EQU (AT91C_PIO_PB14) ;- SSC Transmit Data 2 +AT91C_PB14_ETXER EQU (AT91C_PIO_PB14) ;- Ethernet MAC Transmikt Coding Error +AT91C_PIO_PB15 EQU (1:SHL:15) ;- Pin Controlled by PB15 +AT91C_PB15_RD2 EQU (AT91C_PIO_PB15) ;- SSC Receive Data 2 +AT91C_PB15_ERX2 EQU (AT91C_PIO_PB15) ;- Ethernet MAC Receive Data 2 +AT91C_PIO_PB16 EQU (1:SHL:16) ;- Pin Controlled by PB16 +AT91C_PB16_RK2 EQU (AT91C_PIO_PB16) ;- SSC Receive Clock 2 +AT91C_PB16_ERX3 EQU (AT91C_PIO_PB16) ;- Ethernet MAC Receive Data 3 +AT91C_PIO_PB17 EQU (1:SHL:17) ;- Pin Controlled by PB17 +AT91C_PB17_RF2 EQU (AT91C_PIO_PB17) ;- SSC Receive Frame Sync 2 +AT91C_PB17_ERXDV EQU (AT91C_PIO_PB17) ;- Ethernet MAC Receive Data Valid +AT91C_PIO_PB18 EQU (1:SHL:18) ;- Pin Controlled by PB18 +AT91C_PB18_RI1 EQU (AT91C_PIO_PB18) ;- USART 1 Ring Indicator +AT91C_PB18_ECOL EQU (AT91C_PIO_PB18) ;- Ethernet MAC Collision Detected +AT91C_PIO_PB19 EQU (1:SHL:19) ;- Pin Controlled by PB19 +AT91C_PB19_DTR1 EQU (AT91C_PIO_PB19) ;- USART 1 Data Terminal ready +AT91C_PB19_ERXCK EQU (AT91C_PIO_PB19) ;- Ethernet MAC Receive Clock +AT91C_PIO_PB2 EQU (1:SHL:2) ;- Pin Controlled by PB2 +AT91C_PB2_TD0 EQU (AT91C_PIO_PB2) ;- SSC Transmit data +AT91C_PB2_SCK3 EQU (AT91C_PIO_PB2) ;- USART 3 Serial Clock +AT91C_PIO_PB20 EQU (1:SHL:20) ;- Pin Controlled by PB20 +AT91C_PB20_TXD1 EQU (AT91C_PIO_PB20) ;- USART 1 Transmit Data +AT91C_PIO_PB21 EQU (1:SHL:21) ;- Pin Controlled by PB21 +AT91C_PB21_RXD1 EQU (AT91C_PIO_PB21) ;- USART 1 Receive Data +AT91C_PIO_PB22 EQU (1:SHL:22) ;- Pin Controlled by PB22 +AT91C_PB22_SCK1 EQU (AT91C_PIO_PB22) ;- USART1 Serial Clock +AT91C_PIO_PB23 EQU (1:SHL:23) ;- Pin Controlled by PB23 +AT91C_PB23_DCD1 EQU (AT91C_PIO_PB23) ;- USART 1 Data Carrier Detect +AT91C_PIO_PB24 EQU (1:SHL:24) ;- Pin Controlled by PB24 +AT91C_PB24_CTS1 EQU (AT91C_PIO_PB24) ;- USART 1 Clear To Send +AT91C_PIO_PB25 EQU (1:SHL:25) ;- Pin Controlled by PB25 +AT91C_PB25_DSR1 EQU (AT91C_PIO_PB25) ;- USART 1 Data Set ready +AT91C_PB25_EF100 EQU (AT91C_PIO_PB25) ;- Ethernet MAC Force 100 Mbits/sec +AT91C_PIO_PB26 EQU (1:SHL:26) ;- Pin Controlled by PB26 +AT91C_PB26_RTS1 EQU (AT91C_PIO_PB26) ;- Usart 0 Ready To Send +AT91C_PIO_PB27 EQU (1:SHL:27) ;- Pin Controlled by PB27 +AT91C_PB27_PCK0 EQU (AT91C_PIO_PB27) ;- PMC Programmable Clock Output 0 +AT91C_PIO_PB28 EQU (1:SHL:28) ;- Pin Controlled by PB28 +AT91C_PB28_FIQ EQU (AT91C_PIO_PB28) ;- AIC Fast Interrupt Input +AT91C_PIO_PB29 EQU (1:SHL:29) ;- Pin Controlled by PB29 +AT91C_PB29_IRQ0 EQU (AT91C_PIO_PB29) ;- Interrupt input 0 +AT91C_PIO_PB3 EQU (1:SHL:3) ;- Pin Controlled by PB3 +AT91C_PB3_RD0 EQU (AT91C_PIO_PB3) ;- SSC Receive Data +AT91C_PB3_MCDA1 EQU (AT91C_PIO_PB3) ;- Multimedia Card A Data 1 +AT91C_PIO_PB4 EQU (1:SHL:4) ;- Pin Controlled by PB4 +AT91C_PB4_RK0 EQU (AT91C_PIO_PB4) ;- SSC Receive Clock +AT91C_PB4_MCDA2 EQU (AT91C_PIO_PB4) ;- Multimedia Card A Data 2 +AT91C_PIO_PB5 EQU (1:SHL:5) ;- Pin Controlled by PB5 +AT91C_PB5_RF0 EQU (AT91C_PIO_PB5) ;- SSC Receive Frame Sync 0 +AT91C_PB5_MCDA3 EQU (AT91C_PIO_PB5) ;- Multimedia Card A Data 3 +AT91C_PIO_PB6 EQU (1:SHL:6) ;- Pin Controlled by PB6 +AT91C_PB6_TF1 EQU (AT91C_PIO_PB6) ;- SSC Transmit Frame Sync 1 +AT91C_PB6_TIOA3 EQU (AT91C_PIO_PB6) ;- Timer Counter 4 Multipurpose Timer I/O Pin A +AT91C_PIO_PB7 EQU (1:SHL:7) ;- Pin Controlled by PB7 +AT91C_PB7_TK1 EQU (AT91C_PIO_PB7) ;- SSC Transmit Clock 1 +AT91C_PB7_TIOB3 EQU (AT91C_PIO_PB7) ;- Timer Counter 3 Multipurpose Timer I/O Pin B +AT91C_PIO_PB8 EQU (1:SHL:8) ;- Pin Controlled by PB8 +AT91C_PB8_TD1 EQU (AT91C_PIO_PB8) ;- SSC Transmit Data 1 +AT91C_PB8_TIOA4 EQU (AT91C_PIO_PB8) ;- Timer Counter 4 Multipurpose Timer I/O Pin A +AT91C_PIO_PB9 EQU (1:SHL:9) ;- Pin Controlled by PB9 +AT91C_PB9_RD1 EQU (AT91C_PIO_PB9) ;- SSC Receive Data 1 +AT91C_PB9_TIOB4 EQU (AT91C_PIO_PB9) ;- Timer Counter 4 Multipurpose Timer I/O Pin B +AT91C_PIO_PC0 EQU (1:SHL:0) ;- Pin Controlled by PC0 +AT91C_PC0_BFCK EQU (AT91C_PIO_PC0) ;- Burst Flash Clock +AT91C_PIO_PC1 EQU (1:SHL:1) ;- Pin Controlled by PC1 +AT91C_PC1_BFRDY_SMOE EQU (AT91C_PIO_PC1) ;- Burst Flash Ready +AT91C_PIO_PC10 EQU (1:SHL:10) ;- Pin Controlled by PC10 +AT91C_PC10_NCS4_CFCS EQU (AT91C_PIO_PC10) ;- Compact Flash Chip Select +AT91C_PIO_PC11 EQU (1:SHL:11) ;- Pin Controlled by PC11 +AT91C_PC11_NCS5_CFCE1 EQU (AT91C_PIO_PC11) ;- Chip Select 5 / Compact Flash Chip Enable 1 +AT91C_PIO_PC12 EQU (1:SHL:12) ;- Pin Controlled by PC12 +AT91C_PC12_NCS6_CFCE2 EQU (AT91C_PIO_PC12) ;- Chip Select 6 / Compact Flash Chip Enable 2 +AT91C_PIO_PC13 EQU (1:SHL:13) ;- Pin Controlled by PC13 +AT91C_PC13_NCS7 EQU (AT91C_PIO_PC13) ;- Chip Select 7 +AT91C_PIO_PC14 EQU (1:SHL:14) ;- Pin Controlled by PC14 +AT91C_PIO_PC15 EQU (1:SHL:15) ;- Pin Controlled by PC15 +AT91C_PIO_PC16 EQU (1:SHL:16) ;- Pin Controlled by PC16 +AT91C_PC16_D16 EQU (AT91C_PIO_PC16) ;- Data Bus [16] +AT91C_PIO_PC17 EQU (1:SHL:17) ;- Pin Controlled by PC17 +AT91C_PC17_D17 EQU (AT91C_PIO_PC17) ;- Data Bus [17] +AT91C_PIO_PC18 EQU (1:SHL:18) ;- Pin Controlled by PC18 +AT91C_PC18_D18 EQU (AT91C_PIO_PC18) ;- Data Bus [18] +AT91C_PIO_PC19 EQU (1:SHL:19) ;- Pin Controlled by PC19 +AT91C_PC19_D19 EQU (AT91C_PIO_PC19) ;- Data Bus [19] +AT91C_PIO_PC2 EQU (1:SHL:2) ;- Pin Controlled by PC2 +AT91C_PC2_BFAVD EQU (AT91C_PIO_PC2) ;- Burst Flash Address Valid +AT91C_PIO_PC20 EQU (1:SHL:20) ;- Pin Controlled by PC20 +AT91C_PC20_D20 EQU (AT91C_PIO_PC20) ;- Data Bus [20] +AT91C_PIO_PC21 EQU (1:SHL:21) ;- Pin Controlled by PC21 +AT91C_PC21_D21 EQU (AT91C_PIO_PC21) ;- Data Bus [21] +AT91C_PIO_PC22 EQU (1:SHL:22) ;- Pin Controlled by PC22 +AT91C_PC22_D22 EQU (AT91C_PIO_PC22) ;- Data Bus [22] +AT91C_PIO_PC23 EQU (1:SHL:23) ;- Pin Controlled by PC23 +AT91C_PC23_D23 EQU (AT91C_PIO_PC23) ;- Data Bus [23] +AT91C_PIO_PC24 EQU (1:SHL:24) ;- Pin Controlled by PC24 +AT91C_PC24_D24 EQU (AT91C_PIO_PC24) ;- Data Bus [24] +AT91C_PIO_PC25 EQU (1:SHL:25) ;- Pin Controlled by PC25 +AT91C_PC25_D25 EQU (AT91C_PIO_PC25) ;- Data Bus [25] +AT91C_PIO_PC26 EQU (1:SHL:26) ;- Pin Controlled by PC26 +AT91C_PC26_D26 EQU (AT91C_PIO_PC26) ;- Data Bus [26] +AT91C_PIO_PC27 EQU (1:SHL:27) ;- Pin Controlled by PC27 +AT91C_PC27_D27 EQU (AT91C_PIO_PC27) ;- Data Bus [27] +AT91C_PIO_PC28 EQU (1:SHL:28) ;- Pin Controlled by PC28 +AT91C_PC28_D28 EQU (AT91C_PIO_PC28) ;- Data Bus [28] +AT91C_PIO_PC29 EQU (1:SHL:29) ;- Pin Controlled by PC29 +AT91C_PC29_D29 EQU (AT91C_PIO_PC29) ;- Data Bus [29] +AT91C_PIO_PC3 EQU (1:SHL:3) ;- Pin Controlled by PC3 +AT91C_PC3_BFBAA_SMWE EQU (AT91C_PIO_PC3) ;- Burst Flash Address Advance / SmartMedia Write Enable +AT91C_PIO_PC30 EQU (1:SHL:30) ;- Pin Controlled by PC30 +AT91C_PC30_D30 EQU (AT91C_PIO_PC30) ;- Data Bus [30] +AT91C_PIO_PC31 EQU (1:SHL:31) ;- Pin Controlled by PC31 +AT91C_PC31_D31 EQU (AT91C_PIO_PC31) ;- Data Bus [31] +AT91C_PIO_PC4 EQU (1:SHL:4) ;- Pin Controlled by PC4 +AT91C_PC4_BFOE EQU (AT91C_PIO_PC4) ;- Burst Flash Output Enable +AT91C_PIO_PC5 EQU (1:SHL:5) ;- Pin Controlled by PC5 +AT91C_PC5_BFWE EQU (AT91C_PIO_PC5) ;- Burst Flash Write Enable +AT91C_PIO_PC6 EQU (1:SHL:6) ;- Pin Controlled by PC6 +AT91C_PC6_NWAIT EQU (AT91C_PIO_PC6) ;- NWAIT +AT91C_PIO_PC7 EQU (1:SHL:7) ;- Pin Controlled by PC7 +AT91C_PC7_A23 EQU (AT91C_PIO_PC7) ;- Address Bus[23] +AT91C_PIO_PC8 EQU (1:SHL:8) ;- Pin Controlled by PC8 +AT91C_PC8_A24 EQU (AT91C_PIO_PC8) ;- Address Bus[24] +AT91C_PIO_PC9 EQU (1:SHL:9) ;- Pin Controlled by PC9 +AT91C_PC9_A25_CFRNW EQU (AT91C_PIO_PC9) ;- Address Bus[25] / Compact Flash Read Not Write +AT91C_PIO_PD0 EQU (1:SHL:0) ;- Pin Controlled by PD0 +AT91C_PD0_ETX0 EQU (AT91C_PIO_PD0) ;- Ethernet MAC Transmit Data 0 +AT91C_PIO_PD1 EQU (1:SHL:1) ;- Pin Controlled by PD1 +AT91C_PD1_ETX1 EQU (AT91C_PIO_PD1) ;- Ethernet MAC Transmit Data 1 +AT91C_PIO_PD10 EQU (1:SHL:10) ;- Pin Controlled by PD10 +AT91C_PD10_PCK3 EQU (AT91C_PIO_PD10) ;- PMC Programmable Clock Output 3 +AT91C_PD10_TPS1 EQU (AT91C_PIO_PD10) ;- ETM ARM9 pipeline status 1 +AT91C_PIO_PD11 EQU (1:SHL:11) ;- Pin Controlled by PD11 +AT91C_PD11_ EQU (AT91C_PIO_PD11) ;- +AT91C_PD11_TPS2 EQU (AT91C_PIO_PD11) ;- ETM ARM9 pipeline status 2 +AT91C_PIO_PD12 EQU (1:SHL:12) ;- Pin Controlled by PD12 +AT91C_PD12_ EQU (AT91C_PIO_PD12) ;- +AT91C_PD12_TPK0 EQU (AT91C_PIO_PD12) ;- ETM Trace Packet 0 +AT91C_PIO_PD13 EQU (1:SHL:13) ;- Pin Controlled by PD13 +AT91C_PD13_ EQU (AT91C_PIO_PD13) ;- +AT91C_PD13_TPK1 EQU (AT91C_PIO_PD13) ;- ETM Trace Packet 1 +AT91C_PIO_PD14 EQU (1:SHL:14) ;- Pin Controlled by PD14 +AT91C_PD14_ EQU (AT91C_PIO_PD14) ;- +AT91C_PD14_TPK2 EQU (AT91C_PIO_PD14) ;- ETM Trace Packet 2 +AT91C_PIO_PD15 EQU (1:SHL:15) ;- Pin Controlled by PD15 +AT91C_PD15_TD0 EQU (AT91C_PIO_PD15) ;- SSC Transmit data +AT91C_PD15_TPK3 EQU (AT91C_PIO_PD15) ;- ETM Trace Packet 3 +AT91C_PIO_PD16 EQU (1:SHL:16) ;- Pin Controlled by PD16 +AT91C_PD16_TD1 EQU (AT91C_PIO_PD16) ;- SSC Transmit Data 1 +AT91C_PD16_TPK4 EQU (AT91C_PIO_PD16) ;- ETM Trace Packet 4 +AT91C_PIO_PD17 EQU (1:SHL:17) ;- Pin Controlled by PD17 +AT91C_PD17_TD2 EQU (AT91C_PIO_PD17) ;- SSC Transmit Data 2 +AT91C_PD17_TPK5 EQU (AT91C_PIO_PD17) ;- ETM Trace Packet 5 +AT91C_PIO_PD18 EQU (1:SHL:18) ;- Pin Controlled by PD18 +AT91C_PD18_NPCS1 EQU (AT91C_PIO_PD18) ;- SPI Peripheral Chip Select 1 +AT91C_PD18_TPK6 EQU (AT91C_PIO_PD18) ;- ETM Trace Packet 6 +AT91C_PIO_PD19 EQU (1:SHL:19) ;- Pin Controlled by PD19 +AT91C_PD19_NPCS2 EQU (AT91C_PIO_PD19) ;- SPI Peripheral Chip Select 2 +AT91C_PD19_TPK7 EQU (AT91C_PIO_PD19) ;- ETM Trace Packet 7 +AT91C_PIO_PD2 EQU (1:SHL:2) ;- Pin Controlled by PD2 +AT91C_PD2_ETX2 EQU (AT91C_PIO_PD2) ;- Ethernet MAC Transmit Data 2 +AT91C_PIO_PD20 EQU (1:SHL:20) ;- Pin Controlled by PD20 +AT91C_PD20_NPCS3 EQU (AT91C_PIO_PD20) ;- SPI Peripheral Chip Select 3 +AT91C_PD20_TPK8 EQU (AT91C_PIO_PD20) ;- ETM Trace Packet 8 +AT91C_PIO_PD21 EQU (1:SHL:21) ;- Pin Controlled by PD21 +AT91C_PD21_RTS0 EQU (AT91C_PIO_PD21) ;- Usart 0 Ready To Send +AT91C_PD21_TPK9 EQU (AT91C_PIO_PD21) ;- ETM Trace Packet 9 +AT91C_PIO_PD22 EQU (1:SHL:22) ;- Pin Controlled by PD22 +AT91C_PD22_RTS1 EQU (AT91C_PIO_PD22) ;- Usart 0 Ready To Send +AT91C_PD22_TPK10 EQU (AT91C_PIO_PD22) ;- ETM Trace Packet 10 +AT91C_PIO_PD23 EQU (1:SHL:23) ;- Pin Controlled by PD23 +AT91C_PD23_RTS2 EQU (AT91C_PIO_PD23) ;- USART 2 Ready To Send +AT91C_PD23_TPK11 EQU (AT91C_PIO_PD23) ;- ETM Trace Packet 11 +AT91C_PIO_PD24 EQU (1:SHL:24) ;- Pin Controlled by PD24 +AT91C_PD24_RTS3 EQU (AT91C_PIO_PD24) ;- USART 3 Ready To Send +AT91C_PD24_TPK12 EQU (AT91C_PIO_PD24) ;- ETM Trace Packet 12 +AT91C_PIO_PD25 EQU (1:SHL:25) ;- Pin Controlled by PD25 +AT91C_PD25_DTR1 EQU (AT91C_PIO_PD25) ;- USART 1 Data Terminal ready +AT91C_PD25_TPK13 EQU (AT91C_PIO_PD25) ;- ETM Trace Packet 13 +AT91C_PIO_PD26 EQU (1:SHL:26) ;- Pin Controlled by PD26 +AT91C_PD26_TPK14 EQU (AT91C_PIO_PD26) ;- ETM Trace Packet 14 +AT91C_PIO_PD27 EQU (1:SHL:27) ;- Pin Controlled by PD27 +AT91C_PD27_TPK15 EQU (AT91C_PIO_PD27) ;- ETM Trace Packet 15 +AT91C_PIO_PD3 EQU (1:SHL:3) ;- Pin Controlled by PD3 +AT91C_PD3_ETX3 EQU (AT91C_PIO_PD3) ;- Ethernet MAC Transmit Data 3 +AT91C_PIO_PD4 EQU (1:SHL:4) ;- Pin Controlled by PD4 +AT91C_PD4_ETXEN EQU (AT91C_PIO_PD4) ;- Ethernet MAC Transmit Enable +AT91C_PIO_PD5 EQU (1:SHL:5) ;- Pin Controlled by PD5 +AT91C_PD5_ETXER EQU (AT91C_PIO_PD5) ;- Ethernet MAC Transmikt Coding Error +AT91C_PIO_PD6 EQU (1:SHL:6) ;- Pin Controlled by PD6 +AT91C_PD6_DTXD EQU (AT91C_PIO_PD6) ;- DBGU Debug Transmit Data +AT91C_PIO_PD7 EQU (1:SHL:7) ;- Pin Controlled by PD7 +AT91C_PD7_PCK0 EQU (AT91C_PIO_PD7) ;- PMC Programmable Clock Output 0 +AT91C_PD7_TSYNC EQU (AT91C_PIO_PD7) ;- ETM Synchronization signal +AT91C_PIO_PD8 EQU (1:SHL:8) ;- Pin Controlled by PD8 +AT91C_PD8_PCK1 EQU (AT91C_PIO_PD8) ;- PMC Programmable Clock Output 1 +AT91C_PD8_TCLK EQU (AT91C_PIO_PD8) ;- ETM Trace Clock signal +AT91C_PIO_PD9 EQU (1:SHL:9) ;- Pin Controlled by PD9 +AT91C_PD9_PCK2 EQU (AT91C_PIO_PD9) ;- PMC Programmable Clock 2 +AT91C_PD9_TPS0 EQU (AT91C_PIO_PD9) ;- ETM ARM9 pipeline status 0 + +;- ***************************************************************************** +;- PERIPHERAL ID DEFINITIONS FOR AT91RM9200 +;- ***************************************************************************** +AT91C_ID_FIQ EQU ( 0) ;- Advanced Interrupt Controller (FIQ) +AT91C_ID_SYS EQU ( 1) ;- System Peripheral +AT91C_ID_PIOA EQU ( 2) ;- Parallel IO Controller A +AT91C_ID_PIOB EQU ( 3) ;- Parallel IO Controller B +AT91C_ID_PIOC EQU ( 4) ;- Parallel IO Controller C +AT91C_ID_PIOD EQU ( 5) ;- Parallel IO Controller D +AT91C_ID_US0 EQU ( 6) ;- USART 0 +AT91C_ID_US1 EQU ( 7) ;- USART 1 +AT91C_ID_US2 EQU ( 8) ;- USART 2 +AT91C_ID_US3 EQU ( 9) ;- USART 3 +AT91C_ID_MCI EQU (10) ;- Multimedia Card Interface +AT91C_ID_UDP EQU (11) ;- USB Device Port +AT91C_ID_TWI EQU (12) ;- Two-Wire Interface +AT91C_ID_SPI EQU (13) ;- Serial Peripheral Interface +AT91C_ID_SSC0 EQU (14) ;- Serial Synchronous Controller 0 +AT91C_ID_SSC1 EQU (15) ;- Serial Synchronous Controller 1 +AT91C_ID_SSC2 EQU (16) ;- Serial Synchronous Controller 2 +AT91C_ID_TC0 EQU (17) ;- Timer Counter 0 +AT91C_ID_TC1 EQU (18) ;- Timer Counter 1 +AT91C_ID_TC2 EQU (19) ;- Timer Counter 2 +AT91C_ID_TC3 EQU (20) ;- Timer Counter 3 +AT91C_ID_TC4 EQU (21) ;- Timer Counter 4 +AT91C_ID_TC5 EQU (22) ;- Timer Counter 5 +AT91C_ID_UHP EQU (23) ;- USB Host port +AT91C_ID_EMAC EQU (24) ;- Ethernet MAC +AT91C_ID_IRQ0 EQU (25) ;- Advanced Interrupt Controller (IRQ0) +AT91C_ID_IRQ1 EQU (26) ;- Advanced Interrupt Controller (IRQ1) +AT91C_ID_IRQ2 EQU (27) ;- Advanced Interrupt Controller (IRQ2) +AT91C_ID_IRQ3 EQU (28) ;- Advanced Interrupt Controller (IRQ3) +AT91C_ID_IRQ4 EQU (29) ;- Advanced Interrupt Controller (IRQ4) +AT91C_ID_IRQ5 EQU (30) ;- Advanced Interrupt Controller (IRQ5) +AT91C_ID_IRQ6 EQU (31) ;- Advanced Interrupt Controller (IRQ6) + +;- ***************************************************************************** +;- BASE ADDRESS DEFINITIONS FOR AT91RM9200 +;- ***************************************************************************** +AT91C_BASE_SYS EQU (0xFFFFF000) ;- (SYS) Base Address +AT91C_BASE_MC EQU (0xFFFFFF00) ;- (MC) Base Address +AT91C_BASE_RTC EQU (0xFFFFFE00) ;- (RTC) Base Address +AT91C_BASE_ST EQU (0xFFFFFD00) ;- (ST) Base Address +AT91C_BASE_PMC EQU (0xFFFFFC00) ;- (PMC) Base Address +AT91C_BASE_CKGR EQU (0xFFFFFC20) ;- (CKGR) Base Address +AT91C_BASE_PIOD EQU (0xFFFFFA00) ;- (PIOD) Base Address +AT91C_BASE_PIOC EQU (0xFFFFF800) ;- (PIOC) Base Address +AT91C_BASE_PIOB EQU (0xFFFFF600) ;- (PIOB) Base Address +AT91C_BASE_PIOA EQU (0xFFFFF400) ;- (PIOA) Base Address +AT91C_BASE_DBGU EQU (0xFFFFF200) ;- (DBGU) Base Address +AT91C_BASE_PDC_DBGU EQU (0xFFFFF300) ;- (PDC_DBGU) Base Address +AT91C_BASE_AIC EQU (0xFFFFF000) ;- (AIC) Base Address +AT91C_BASE_PDC_SPI EQU (0xFFFE0100) ;- (PDC_SPI) Base Address +AT91C_BASE_SPI EQU (0xFFFE0000) ;- (SPI) Base Address +AT91C_BASE_PDC_SSC2 EQU (0xFFFD8100) ;- (PDC_SSC2) Base Address +AT91C_BASE_SSC2 EQU (0xFFFD8000) ;- (SSC2) Base Address +AT91C_BASE_PDC_SSC1 EQU (0xFFFD4100) ;- (PDC_SSC1) Base Address +AT91C_BASE_SSC1 EQU (0xFFFD4000) ;- (SSC1) Base Address +AT91C_BASE_PDC_SSC0 EQU (0xFFFD0100) ;- (PDC_SSC0) Base Address +AT91C_BASE_SSC0 EQU (0xFFFD0000) ;- (SSC0) Base Address +AT91C_BASE_PDC_US3 EQU (0xFFFCC100) ;- (PDC_US3) Base Address +AT91C_BASE_US3 EQU (0xFFFCC000) ;- (US3) Base Address +AT91C_BASE_PDC_US2 EQU (0xFFFC8100) ;- (PDC_US2) Base Address +AT91C_BASE_US2 EQU (0xFFFC8000) ;- (US2) Base Address +AT91C_BASE_PDC_US1 EQU (0xFFFC4100) ;- (PDC_US1) Base Address +AT91C_BASE_US1 EQU (0xFFFC4000) ;- (US1) Base Address +AT91C_BASE_PDC_US0 EQU (0xFFFC0100) ;- (PDC_US0) Base Address +AT91C_BASE_US0 EQU (0xFFFC0000) ;- (US0) Base Address +AT91C_BASE_TWI EQU (0xFFFB8000) ;- (TWI) Base Address +AT91C_BASE_PDC_MCI EQU (0xFFFB4100) ;- (PDC_MCI) Base Address +AT91C_BASE_MCI EQU (0xFFFB4000) ;- (MCI) Base Address +AT91C_BASE_UDP EQU (0xFFFB0000) ;- (UDP) Base Address +AT91C_BASE_TC5 EQU (0xFFFA4080) ;- (TC5) Base Address +AT91C_BASE_TC4 EQU (0xFFFA4040) ;- (TC4) Base Address +AT91C_BASE_TC3 EQU (0xFFFA4000) ;- (TC3) Base Address +AT91C_BASE_TCB1 EQU (0xFFFA4080) ;- (TCB1) Base Address +AT91C_BASE_TC2 EQU (0xFFFA0080) ;- (TC2) Base Address +AT91C_BASE_TC1 EQU (0xFFFA0040) ;- (TC1) Base Address +AT91C_BASE_TC0 EQU (0xFFFA0000) ;- (TC0) Base Address +AT91C_BASE_TCB0 EQU (0xFFFA0000) ;- (TCB0) Base Address +AT91C_BASE_UHP EQU (0x00300000) ;- (UHP) Base Address +AT91C_BASE_EMAC EQU (0xFFFBC000) ;- (EMAC) Base Address +AT91C_BASE_EBI EQU (0xFFFFFF60) ;- (EBI) Base Address +AT91C_BASE_SMC2 EQU (0xFFFFFF70) ;- (SMC2) Base Address +AT91C_BASE_SDRC EQU (0xFFFFFF90) ;- (SDRC) Base Address +AT91C_BASE_BFC EQU (0xFFFFFFC0) ;- (BFC) Base Address + +;- ***************************************************************************** +;- MEMORY MAPPING DEFINITIONS FOR AT91RM9200 +;- ***************************************************************************** +AT91C_ISRAM EQU (0x00200000) ;- Internal SRAM base address +AT91C_ISRAM_SIZE EQU (0x00004000) ;- Internal SRAM size in byte (16 Kbyte) +AT91C_IROM EQU (0x00100000) ;- Internal ROM base address +AT91C_IROM_SIZE EQU (0x00020000) ;- Internal ROM size in byte (128 Kbyte) + + + END diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h b/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h new file mode 100644 index 0000000..dabab01 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h @@ -0,0 +1,2401 @@ +// ---------------------------------------------------------------------------- +// ATMEL Microcontroller Software Support - ROUSSET - +// ---------------------------------------------------------------------------- +// The software is delivered "AS IS" without warranty or condition of any +// kind, either express, implied or statutory. This includes without +// limitation any warranty or condition with respect to merchantability or +// fitness for any particular purpose, or against the infringements of +// intellectual property rights of others. +// ---------------------------------------------------------------------------- +// File Name : AT91RM9200.h +// Object : AT91RM9200 definitions +// Generated : AT91 SW Application Group 11/19/2003 (17:20:51) +// +// CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// +// CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// +// CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// +// CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// +// CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// +// CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// +// CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// +// CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// +// CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// +// CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// +// CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// +// CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// +// CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// +// CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// +// CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// +// CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// +// CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// +// CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// +// CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// +// CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// +// CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// +// CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// +// CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// +// ---------------------------------------------------------------------------- + +// Hardware register definition + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR System Peripherals +// ***************************************************************************** + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Memory Controller Interface +// ***************************************************************************** +// *** Register offset in AT91S_MC structure *** +#define MC_RCR ( 0) // MC Remap Control Register +#define MC_ASR ( 4) // MC Abort Status Register +#define MC_AASR ( 8) // MC Abort Address Status Register +#define MC_PUIA (16) // MC Protection Unit Area +#define MC_PUP (80) // MC Protection Unit Peripherals +#define MC_PUER (84) // MC Protection Unit Enable Register +// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- +#define AT91C_MC_RCB (0x1 << 0) // (MC) Remap Command Bit +// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- +#define AT91C_MC_UNDADD (0x1 << 0) // (MC) Undefined Addess Abort Status +#define AT91C_MC_MISADD (0x1 << 1) // (MC) Misaligned Addess Abort Status +#define AT91C_MC_MPU (0x1 << 2) // (MC) Memory protection Unit Abort Status +#define AT91C_MC_ABTSZ (0x3 << 8) // (MC) Abort Size Status +#define AT91C_MC_ABTSZ_BYTE (0x0 << 8) // (MC) Byte +#define AT91C_MC_ABTSZ_HWORD (0x1 << 8) // (MC) Half-word +#define AT91C_MC_ABTSZ_WORD (0x2 << 8) // (MC) Word +#define AT91C_MC_ABTTYP (0x3 << 10) // (MC) Abort Type Status +#define AT91C_MC_ABTTYP_DATAR (0x0 << 10) // (MC) Data Read +#define AT91C_MC_ABTTYP_DATAW (0x1 << 10) // (MC) Data Write +#define AT91C_MC_ABTTYP_FETCH (0x2 << 10) // (MC) Code Fetch +#define AT91C_MC_MST0 (0x1 << 16) // (MC) Master 0 Abort Source +#define AT91C_MC_MST1 (0x1 << 17) // (MC) Master 1 Abort Source +#define AT91C_MC_SVMST0 (0x1 << 24) // (MC) Saved Master 0 Abort Source +#define AT91C_MC_SVMST1 (0x1 << 25) // (MC) Saved Master 1 Abort Source +// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- +#define AT91C_MC_PROT (0x3 << 0) // (MC) Protection +#define AT91C_MC_PROT_PNAUNA (0x0) // (MC) Privilege: No Access, User: No Access +#define AT91C_MC_PROT_PRWUNA (0x1) // (MC) Privilege: Read/Write, User: No Access +#define AT91C_MC_PROT_PRWURO (0x2) // (MC) Privilege: Read/Write, User: Read Only +#define AT91C_MC_PROT_PRWURW (0x3) // (MC) Privilege: Read/Write, User: Read/Write +#define AT91C_MC_SIZE (0xF << 4) // (MC) Internal Area Size +#define AT91C_MC_SIZE_1KB (0x0 << 4) // (MC) Area size 1KByte +#define AT91C_MC_SIZE_2KB (0x1 << 4) // (MC) Area size 2KByte +#define AT91C_MC_SIZE_4KB (0x2 << 4) // (MC) Area size 4KByte +#define AT91C_MC_SIZE_8KB (0x3 << 4) // (MC) Area size 8KByte +#define AT91C_MC_SIZE_16KB (0x4 << 4) // (MC) Area size 16KByte +#define AT91C_MC_SIZE_32KB (0x5 << 4) // (MC) Area size 32KByte +#define AT91C_MC_SIZE_64KB (0x6 << 4) // (MC) Area size 64KByte +#define AT91C_MC_SIZE_128KB (0x7 << 4) // (MC) Area size 128KByte +#define AT91C_MC_SIZE_256KB (0x8 << 4) // (MC) Area size 256KByte +#define AT91C_MC_SIZE_512KB (0x9 << 4) // (MC) Area size 512KByte +#define AT91C_MC_SIZE_1MB (0xA << 4) // (MC) Area size 1MByte +#define AT91C_MC_SIZE_2MB (0xB << 4) // (MC) Area size 2MByte +#define AT91C_MC_SIZE_4MB (0xC << 4) // (MC) Area size 4MByte +#define AT91C_MC_SIZE_8MB (0xD << 4) // (MC) Area size 8MByte +#define AT91C_MC_SIZE_16MB (0xE << 4) // (MC) Area size 16MByte +#define AT91C_MC_SIZE_64MB (0xF << 4) // (MC) Area size 64MByte +#define AT91C_MC_BA (0x3FFFF << 10) // (MC) Internal Area Base Address +// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- +// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- +#define AT91C_MC_PUEB (0x1 << 0) // (MC) Protection Unit enable Bit + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface +// ***************************************************************************** +// *** Register offset in AT91S_RTC structure *** +#define RTC_CR ( 0) // Control Register +#define RTC_MR ( 4) // Mode Register +#define RTC_TIMR ( 8) // Time Register +#define RTC_CALR (12) // Calendar Register +#define RTC_TIMALR (16) // Time Alarm Register +#define RTC_CALALR (20) // Calendar Alarm Register +#define RTC_SR (24) // Status Register +#define RTC_SCCR (28) // Status Clear Command Register +#define RTC_IER (32) // Interrupt Enable Register +#define RTC_IDR (36) // Interrupt Disable Register +#define RTC_IMR (40) // Interrupt Mask Register +#define RTC_VER (44) // Valid Entry Register +// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- +#define AT91C_RTC_UPDTIM (0x1 << 0) // (RTC) Update Request Time Register +#define AT91C_RTC_UPDCAL (0x1 << 1) // (RTC) Update Request Calendar Register +#define AT91C_RTC_TIMEVSEL (0x3 << 8) // (RTC) Time Event Selection +#define AT91C_RTC_TIMEVSEL_MINUTE (0x0 << 8) // (RTC) Minute change. +#define AT91C_RTC_TIMEVSEL_HOUR (0x1 << 8) // (RTC) Hour change. +#define AT91C_RTC_TIMEVSEL_DAY24 (0x2 << 8) // (RTC) Every day at midnight. +#define AT91C_RTC_TIMEVSEL_DAY12 (0x3 << 8) // (RTC) Every day at noon. +#define AT91C_RTC_CALEVSEL (0x3 << 16) // (RTC) Calendar Event Selection +#define AT91C_RTC_CALEVSEL_WEEK (0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00). +#define AT91C_RTC_CALEVSEL_MONTH (0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00). +#define AT91C_RTC_CALEVSEL_YEAR (0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00). +// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- +#define AT91C_RTC_HRMOD (0x1 << 0) // (RTC) 12-24 hour Mode +// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- +#define AT91C_RTC_SEC (0x7F << 0) // (RTC) Current Second +#define AT91C_RTC_MIN (0x7F << 8) // (RTC) Current Minute +#define AT91C_RTC_HOUR (0x1F << 16) // (RTC) Current Hour +#define AT91C_RTC_AMPM (0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator +// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- +#define AT91C_RTC_CENT (0x3F << 0) // (RTC) Current Century +#define AT91C_RTC_YEAR (0xFF << 8) // (RTC) Current Year +#define AT91C_RTC_MONTH (0x1F << 16) // (RTC) Current Month +#define AT91C_RTC_DAY (0x7 << 21) // (RTC) Current Day +#define AT91C_RTC_DATE (0x3F << 24) // (RTC) Current Date +// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- +#define AT91C_RTC_SECEN (0x1 << 7) // (RTC) Second Alarm Enable +#define AT91C_RTC_MINEN (0x1 << 15) // (RTC) Minute Alarm +#define AT91C_RTC_HOUREN (0x1 << 23) // (RTC) Current Hour +// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- +#define AT91C_RTC_MONTHEN (0x1 << 23) // (RTC) Month Alarm Enable +#define AT91C_RTC_DATEEN (0x1 << 31) // (RTC) Date Alarm Enable +// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- +#define AT91C_RTC_ACKUPD (0x1 << 0) // (RTC) Acknowledge for Update +#define AT91C_RTC_ALARM (0x1 << 1) // (RTC) Alarm Flag +#define AT91C_RTC_SECEV (0x1 << 2) // (RTC) Second Event +#define AT91C_RTC_TIMEV (0x1 << 3) // (RTC) Time Event +#define AT91C_RTC_CALEV (0x1 << 4) // (RTC) Calendar event +// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- +// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- +// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- +// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- +// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- +#define AT91C_RTC_NVTIM (0x1 << 0) // (RTC) Non valid Time +#define AT91C_RTC_NVCAL (0x1 << 1) // (RTC) Non valid Calendar +#define AT91C_RTC_NVTIMALR (0x1 << 2) // (RTC) Non valid time Alarm +#define AT91C_RTC_NVCALALR (0x1 << 3) // (RTC) Nonvalid Calendar Alarm + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR System Timer Interface +// ***************************************************************************** +// *** Register offset in AT91S_ST structure *** +#define ST_CR ( 0) // Control Register +#define ST_PIMR ( 4) // Period Interval Mode Register +#define ST_WDMR ( 8) // Watchdog Mode Register +#define ST_RTMR (12) // Real-time Mode Register +#define ST_SR (16) // Status Register +#define ST_IER (20) // Interrupt Enable Register +#define ST_IDR (24) // Interrupt Disable Register +#define ST_IMR (28) // Interrupt Mask Register +#define ST_RTAR (32) // Real-time Alarm Register +#define ST_CRTR (36) // Current Real-time Register +// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- +#define AT91C_ST_WDRST (0x1 << 0) // (ST) Watchdog Timer Restart +// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- +#define AT91C_ST_PIV (0xFFFF << 0) // (ST) Watchdog Timer Restart +// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- +#define AT91C_ST_WDV (0xFFFF << 0) // (ST) Watchdog Timer Restart +#define AT91C_ST_RSTEN (0x1 << 16) // (ST) Reset Enable +#define AT91C_ST_EXTEN (0x1 << 17) // (ST) External Signal Assertion Enable +// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- +#define AT91C_ST_RTPRES (0xFFFF << 0) // (ST) Real-time Timer Prescaler Value +// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- +#define AT91C_ST_PITS (0x1 << 0) // (ST) Period Interval Timer Interrupt +#define AT91C_ST_WDOVF (0x1 << 1) // (ST) Watchdog Overflow +#define AT91C_ST_RTTINC (0x1 << 2) // (ST) Real-time Timer Increment +#define AT91C_ST_ALMS (0x1 << 3) // (ST) Alarm Status +// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- +// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- +// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- +// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- +#define AT91C_ST_ALMV (0xFFFFF << 0) // (ST) Alarm Value Value +// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- +#define AT91C_ST_CRTV (0xFFFFF << 0) // (ST) Current Real-time Value + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Power Management Controler +// ***************************************************************************** +// *** Register offset in AT91S_PMC structure *** +#define PMC_SCER ( 0) // System Clock Enable Register +#define PMC_SCDR ( 4) // System Clock Disable Register +#define PMC_SCSR ( 8) // System Clock Status Register +#define PMC_PCER (16) // Peripheral Clock Enable Register +#define PMC_PCDR (20) // Peripheral Clock Disable Register +#define PMC_PCSR (24) // Peripheral Clock Status Register +#define PMC_MCKR (48) // Master Clock Register +#define PMC_PCKR (64) // Programmable Clock Register +#define PMC_IER (96) // Interrupt Enable Register +#define PMC_IDR (100) // Interrupt Disable Register +#define PMC_SR (104) // Status Register +#define PMC_IMR (108) // Interrupt Mask Register +// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- +#define AT91C_PMC_PCK (0x1 << 0) // (PMC) Processor Clock +#define AT91C_PMC_UDP (0x1 << 1) // (PMC) USB Device Port Clock +#define AT91C_PMC_MCKUDP (0x1 << 2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend +#define AT91C_PMC_UHP (0x1 << 4) // (PMC) USB Host Port Clock +#define AT91C_PMC_PCK0 (0x1 << 8) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK1 (0x1 << 9) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK2 (0x1 << 10) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK3 (0x1 << 11) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK4 (0x1 << 12) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK5 (0x1 << 13) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK6 (0x1 << 14) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK7 (0x1 << 15) // (PMC) Programmable Clock Output +// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- +// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- +// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- +#define AT91C_PMC_CSS (0x3 << 0) // (PMC) Programmable Clock Selection +#define AT91C_PMC_CSS_SLOW_CLK (0x0) // (PMC) Slow Clock is selected +#define AT91C_PMC_CSS_MAIN_CLK (0x1) // (PMC) Main Clock is selected +#define AT91C_PMC_CSS_PLLA_CLK (0x2) // (PMC) Clock from PLL A is selected +#define AT91C_PMC_CSS_PLLB_CLK (0x3) // (PMC) Clock from PLL B is selected +#define AT91C_PMC_PRES (0x7 << 2) // (PMC) Programmable Clock Prescaler +#define AT91C_PMC_PRES_CLK (0x0 << 2) // (PMC) Selected clock +#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) // (PMC) Selected clock divided by 2 +#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) // (PMC) Selected clock divided by 4 +#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) // (PMC) Selected clock divided by 8 +#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) // (PMC) Selected clock divided by 16 +#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) // (PMC) Selected clock divided by 32 +#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) // (PMC) Selected clock divided by 64 +#define AT91C_PMC_MDIV (0x3 << 8) // (PMC) Master Clock Division +#define AT91C_PMC_MDIV_1 (0x0 << 8) // (PMC) The master clock and the processor clock are the same +#define AT91C_PMC_MDIV_2 (0x1 << 8) // (PMC) The processor clock is twice as fast as the master clock +#define AT91C_PMC_MDIV_3 (0x2 << 8) // (PMC) The processor clock is three times faster than the master clock +#define AT91C_PMC_MDIV_4 (0x3 << 8) // (PMC) The processor clock is four times faster than the master clock +// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- +// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- +#define AT91C_PMC_MOSCS (0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask +#define AT91C_PMC_LOCKA (0x1 << 1) // (PMC) PLL A Status/Enable/Disable/Mask +#define AT91C_PMC_LOCKB (0x1 << 2) // (PMC) PLL B Status/Enable/Disable/Mask +#define AT91C_PMC_MCKRDY (0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK0RDY (0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK1RDY (0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK2RDY (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK3RDY (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK4RDY (0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK5RDY (0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK6RDY (0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK7RDY (0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask +// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- +// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- +// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Clock Generator Controler +// ***************************************************************************** +// *** Register offset in AT91S_CKGR structure *** +#define CKGR_MOR ( 0) // Main Oscillator Register +#define CKGR_MCFR ( 4) // Main Clock Frequency Register +#define CKGR_PLLAR ( 8) // PLL A Register +#define CKGR_PLLBR (12) // PLL B Register +// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- +#define AT91C_CKGR_MOSCEN (0x1 << 0) // (CKGR) Main Oscillator Enable +#define AT91C_CKGR_OSCTEST (0x1 << 1) // (CKGR) Oscillator Test +#define AT91C_CKGR_OSCOUNT (0xFF << 8) // (CKGR) Main Oscillator Start-up Time +// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- +#define AT91C_CKGR_MAINF (0xFFFF << 0) // (CKGR) Main Clock Frequency +#define AT91C_CKGR_MAINRDY (0x1 << 16) // (CKGR) Main Clock Ready +// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- +#define AT91C_CKGR_DIVA (0xFF << 0) // (CKGR) Divider Selected +#define AT91C_CKGR_DIVA_0 (0x0) // (CKGR) Divider output is 0 +#define AT91C_CKGR_DIVA_BYPASS (0x1) // (CKGR) Divider is bypassed +#define AT91C_CKGR_PLLACOUNT (0x3F << 8) // (CKGR) PLL A Counter +#define AT91C_CKGR_OUTA (0x3 << 14) // (CKGR) PLL A Output Frequency Range +#define AT91C_CKGR_OUTA_0 (0x0 << 14) // (CKGR) Please refer to the PLLA datasheet +#define AT91C_CKGR_OUTA_1 (0x1 << 14) // (CKGR) Please refer to the PLLA datasheet +#define AT91C_CKGR_OUTA_2 (0x2 << 14) // (CKGR) Please refer to the PLLA datasheet +#define AT91C_CKGR_OUTA_3 (0x3 << 14) // (CKGR) Please refer to the PLLA datasheet +#define AT91C_CKGR_MULA (0x7FF << 16) // (CKGR) PLL A Multiplier +#define AT91C_CKGR_SRCA (0x1 << 29) // (CKGR) PLL A Source +// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- +#define AT91C_CKGR_DIVB (0xFF << 0) // (CKGR) Divider Selected +#define AT91C_CKGR_DIVB_0 (0x0) // (CKGR) Divider output is 0 +#define AT91C_CKGR_DIVB_BYPASS (0x1) // (CKGR) Divider is bypassed +#define AT91C_CKGR_PLLBCOUNT (0x3F << 8) // (CKGR) PLL B Counter +#define AT91C_CKGR_OUTB (0x3 << 14) // (CKGR) PLL B Output Frequency Range +#define AT91C_CKGR_OUTB_0 (0x0 << 14) // (CKGR) Please refer to the PLLB datasheet +#define AT91C_CKGR_OUTB_1 (0x1 << 14) // (CKGR) Please refer to the PLLB datasheet +#define AT91C_CKGR_OUTB_2 (0x2 << 14) // (CKGR) Please refer to the PLLB datasheet +#define AT91C_CKGR_OUTB_3 (0x3 << 14) // (CKGR) Please refer to the PLLB datasheet +#define AT91C_CKGR_MULB (0x7FF << 16) // (CKGR) PLL B Multiplier +#define AT91C_CKGR_USB_96M (0x1 << 28) // (CKGR) Divider for USB Ports +#define AT91C_CKGR_USB_PLL (0x1 << 29) // (CKGR) PLL Use + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Parallel Input Output Controler +// ***************************************************************************** +// *** Register offset in AT91S_PIO structure *** +#define PIO_PER ( 0) // PIO Enable Register +#define PIO_PDR ( 4) // PIO Disable Register +#define PIO_PSR ( 8) // PIO Status Register +#define PIO_OER (16) // Output Enable Register +#define PIO_ODR (20) // Output Disable Registerr +#define PIO_OSR (24) // Output Status Register +#define PIO_IFER (32) // Input Filter Enable Register +#define PIO_IFDR (36) // Input Filter Disable Register +#define PIO_IFSR (40) // Input Filter Status Register +#define PIO_SODR (48) // Set Output Data Register +#define PIO_CODR (52) // Clear Output Data Register +#define PIO_ODSR (56) // Output Data Status Register +#define PIO_PDSR (60) // Pin Data Status Register +#define PIO_IER (64) // Interrupt Enable Register +#define PIO_IDR (68) // Interrupt Disable Register +#define PIO_IMR (72) // Interrupt Mask Register +#define PIO_ISR (76) // Interrupt Status Register +#define PIO_MDER (80) // Multi-driver Enable Register +#define PIO_MDDR (84) // Multi-driver Disable Register +#define PIO_MDSR (88) // Multi-driver Status Register +#define PIO_PPUDR (96) // Pull-up Disable Register +#define PIO_PPUER (100) // Pull-up Enable Register +#define PIO_PPUSR (104) // Pad Pull-up Status Register +#define PIO_ASR (112) // Select A Register +#define PIO_BSR (116) // Select B Register +#define PIO_ABSR (120) // AB Select Status Register +#define PIO_OWER (160) // Output Write Enable Register +#define PIO_OWDR (164) // Output Write Disable Register +#define PIO_OWSR (168) // Output Write Status Register + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Debug Unit +// ***************************************************************************** +// *** Register offset in AT91S_DBGU structure *** +#define DBGU_CR ( 0) // Control Register +#define DBGU_MR ( 4) // Mode Register +#define DBGU_IER ( 8) // Interrupt Enable Register +#define DBGU_IDR (12) // Interrupt Disable Register +#define DBGU_IMR (16) // Interrupt Mask Register +#define DBGU_CSR (20) // Channel Status Register +#define DBGU_RHR (24) // Receiver Holding Register +#define DBGU_THR (28) // Transmitter Holding Register +#define DBGU_BRGR (32) // Baud Rate Generator Register +#define DBGU_C1R (64) // Chip ID1 Register +#define DBGU_C2R (68) // Chip ID2 Register +#define DBGU_FNTR (72) // Force NTRST Register +#define DBGU_RPR (256) // Receive Pointer Register +#define DBGU_RCR (260) // Receive Counter Register +#define DBGU_TPR (264) // Transmit Pointer Register +#define DBGU_TCR (268) // Transmit Counter Register +#define DBGU_RNPR (272) // Receive Next Pointer Register +#define DBGU_RNCR (276) // Receive Next Counter Register +#define DBGU_TNPR (280) // Transmit Next Pointer Register +#define DBGU_TNCR (284) // Transmit Next Counter Register +#define DBGU_PTCR (288) // PDC Transfer Control Register +#define DBGU_PTSR (292) // PDC Transfer Status Register +// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- +#define AT91C_US_RSTRX (0x1 << 2) // (DBGU) Reset Receiver +#define AT91C_US_RSTTX (0x1 << 3) // (DBGU) Reset Transmitter +#define AT91C_US_RXEN (0x1 << 4) // (DBGU) Receiver Enable +#define AT91C_US_RXDIS (0x1 << 5) // (DBGU) Receiver Disable +#define AT91C_US_TXEN (0x1 << 6) // (DBGU) Transmitter Enable +#define AT91C_US_TXDIS (0x1 << 7) // (DBGU) Transmitter Disable +// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- +#define AT91C_US_PAR (0x7 << 9) // (DBGU) Parity type +#define AT91C_US_PAR_EVEN (0x0 << 9) // (DBGU) Even Parity +#define AT91C_US_PAR_ODD (0x1 << 9) // (DBGU) Odd Parity +#define AT91C_US_PAR_SPACE (0x2 << 9) // (DBGU) Parity forced to 0 (Space) +#define AT91C_US_PAR_MARK (0x3 << 9) // (DBGU) Parity forced to 1 (Mark) +#define AT91C_US_PAR_NONE (0x4 << 9) // (DBGU) No Parity +#define AT91C_US_PAR_MULTI_DROP (0x6 << 9) // (DBGU) Multi-drop mode +#define AT91C_US_CHMODE (0x3 << 14) // (DBGU) Channel Mode +#define AT91C_US_CHMODE_NORMAL (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. +#define AT91C_US_CHMODE_AUTO (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. +#define AT91C_US_CHMODE_LOCAL (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. +#define AT91C_US_CHMODE_REMOTE (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. +// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- +#define AT91C_US_RXRDY (0x1 << 0) // (DBGU) RXRDY Interrupt +#define AT91C_US_TXRDY (0x1 << 1) // (DBGU) TXRDY Interrupt +#define AT91C_US_ENDRX (0x1 << 3) // (DBGU) End of Receive Transfer Interrupt +#define AT91C_US_ENDTX (0x1 << 4) // (DBGU) End of Transmit Interrupt +#define AT91C_US_OVRE (0x1 << 5) // (DBGU) Overrun Interrupt +#define AT91C_US_FRAME (0x1 << 6) // (DBGU) Framing Error Interrupt +#define AT91C_US_PARE (0x1 << 7) // (DBGU) Parity Error Interrupt +#define AT91C_US_TXEMPTY (0x1 << 9) // (DBGU) TXEMPTY Interrupt +#define AT91C_US_TXBUFE (0x1 << 11) // (DBGU) TXBUFE Interrupt +#define AT91C_US_RXBUFF (0x1 << 12) // (DBGU) RXBUFF Interrupt +#define AT91C_US_COMM_TX (0x1 << 30) // (DBGU) COMM_TX Interrupt +#define AT91C_US_COMM_RX (0x1 << 31) // (DBGU) COMM_RX Interrupt +// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- +// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- +// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- +// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- +#define AT91C_US_FORCE_NTRST (0x1 << 0) // (DBGU) Force NTRST in JTAG + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Peripheral Data Controller +// ***************************************************************************** +// *** Register offset in AT91S_PDC structure *** +#define PDC_RPR ( 0) // Receive Pointer Register +#define PDC_RCR ( 4) // Receive Counter Register +#define PDC_TPR ( 8) // Transmit Pointer Register +#define PDC_TCR (12) // Transmit Counter Register +#define PDC_RNPR (16) // Receive Next Pointer Register +#define PDC_RNCR (20) // Receive Next Counter Register +#define PDC_TNPR (24) // Transmit Next Pointer Register +#define PDC_TNCR (28) // Transmit Next Counter Register +#define PDC_PTCR (32) // PDC Transfer Control Register +#define PDC_PTSR (36) // PDC Transfer Status Register +// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- +#define AT91C_PDC_RXTEN (0x1 << 0) // (PDC) Receiver Transfer Enable +#define AT91C_PDC_RXTDIS (0x1 << 1) // (PDC) Receiver Transfer Disable +#define AT91C_PDC_TXTEN (0x1 << 8) // (PDC) Transmitter Transfer Enable +#define AT91C_PDC_TXTDIS (0x1 << 9) // (PDC) Transmitter Transfer Disable +// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller +// ***************************************************************************** +// *** Register offset in AT91S_AIC structure *** +#define AIC_SMR ( 0) // Source Mode Register +#define AIC_SVR (128) // Source Vector Register +#define AIC_IVR (256) // IRQ Vector Register +#define AIC_FVR (260) // FIQ Vector Register +#define AIC_ISR (264) // Interrupt Status Register +#define AIC_IPR (268) // Interrupt Pending Register +#define AIC_IMR (272) // Interrupt Mask Register +#define AIC_CISR (276) // Core Interrupt Status Register +#define AIC_IECR (288) // Interrupt Enable Command Register +#define AIC_IDCR (292) // Interrupt Disable Command Register +#define AIC_ICCR (296) // Interrupt Clear Command Register +#define AIC_ISCR (300) // Interrupt Set Command Register +#define AIC_EOICR (304) // End of Interrupt Command Register +#define AIC_SPU (308) // Spurious Vector Register +#define AIC_DCR (312) // Debug Control Register (Protect) +#define AIC_FFER (320) // Fast Forcing Enable Register +#define AIC_FFDR (324) // Fast Forcing Disable Register +#define AIC_FFSR (328) // Fast Forcing Status Register +// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- +#define AT91C_AIC_PRIOR (0x7 << 0) // (AIC) Priority Level +#define AT91C_AIC_PRIOR_LOWEST (0x0) // (AIC) Lowest priority level +#define AT91C_AIC_PRIOR_HIGHEST (0x7) // (AIC) Highest priority level +#define AT91C_AIC_SRCTYPE (0x3 << 5) // (AIC) Interrupt Source Type +#define AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE (0x0 << 5) // (AIC) Internal Sources Code Label Level Sensitive +#define AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED (0x1 << 5) // (AIC) Internal Sources Code Label Edge triggered +#define AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL (0x2 << 5) // (AIC) External Sources Code Label High-level Sensitive +#define AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE (0x3 << 5) // (AIC) External Sources Code Label Positive Edge triggered +// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- +#define AT91C_AIC_NFIQ (0x1 << 0) // (AIC) NFIQ Status +#define AT91C_AIC_NIRQ (0x1 << 1) // (AIC) NIRQ Status +// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- +#define AT91C_AIC_DCR_PROT (0x1 << 0) // (AIC) Protection Mode +#define AT91C_AIC_DCR_GMSK (0x1 << 1) // (AIC) General Mask + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Serial Parallel Interface +// ***************************************************************************** +// *** Register offset in AT91S_SPI structure *** +#define SPI_CR ( 0) // Control Register +#define SPI_MR ( 4) // Mode Register +#define SPI_RDR ( 8) // Receive Data Register +#define SPI_TDR (12) // Transmit Data Register +#define SPI_SR (16) // Status Register +#define SPI_IER (20) // Interrupt Enable Register +#define SPI_IDR (24) // Interrupt Disable Register +#define SPI_IMR (28) // Interrupt Mask Register +#define SPI_CSR (48) // Chip Select Register +#define SPI_RPR (256) // Receive Pointer Register +#define SPI_RCR (260) // Receive Counter Register +#define SPI_TPR (264) // Transmit Pointer Register +#define SPI_TCR (268) // Transmit Counter Register +#define SPI_RNPR (272) // Receive Next Pointer Register +#define SPI_RNCR (276) // Receive Next Counter Register +#define SPI_TNPR (280) // Transmit Next Pointer Register +#define SPI_TNCR (284) // Transmit Next Counter Register +#define SPI_PTCR (288) // PDC Transfer Control Register +#define SPI_PTSR (292) // PDC Transfer Status Register +// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- +#define AT91C_SPI_SPIEN (0x1 << 0) // (SPI) SPI Enable +#define AT91C_SPI_SPIDIS (0x1 << 1) // (SPI) SPI Disable +#define AT91C_SPI_SWRST (0x1 << 7) // (SPI) SPI Software reset +// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- +#define AT91C_SPI_MSTR (0x1 << 0) // (SPI) Master/Slave Mode +#define AT91C_SPI_PS (0x1 << 1) // (SPI) Peripheral Select +#define AT91C_SPI_PS_FIXED (0x0 << 1) // (SPI) Fixed Peripheral Select +#define AT91C_SPI_PS_VARIABLE (0x1 << 1) // (SPI) Variable Peripheral Select +#define AT91C_SPI_PCSDEC (0x1 << 2) // (SPI) Chip Select Decode +#define AT91C_SPI_DIV32 (0x1 << 3) // (SPI) Clock Selection +#define AT91C_SPI_MODFDIS (0x1 << 4) // (SPI) Mode Fault Detection +#define AT91C_SPI_LLB (0x1 << 7) // (SPI) Clock Selection +#define AT91C_SPI_PCS (0xF << 16) // (SPI) Peripheral Chip Select +#define AT91C_SPI_DLYBCS (0xFF << 24) // (SPI) Delay Between Chip Selects +// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- +#define AT91C_SPI_RD (0xFFFF << 0) // (SPI) Receive Data +#define AT91C_SPI_RPCS (0xF << 16) // (SPI) Peripheral Chip Select Status +// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- +#define AT91C_SPI_TD (0xFFFF << 0) // (SPI) Transmit Data +#define AT91C_SPI_TPCS (0xF << 16) // (SPI) Peripheral Chip Select Status +// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- +#define AT91C_SPI_RDRF (0x1 << 0) // (SPI) Receive Data Register Full +#define AT91C_SPI_TDRE (0x1 << 1) // (SPI) Transmit Data Register Empty +#define AT91C_SPI_MODF (0x1 << 2) // (SPI) Mode Fault Error +#define AT91C_SPI_OVRES (0x1 << 3) // (SPI) Overrun Error Status +#define AT91C_SPI_SPENDRX (0x1 << 4) // (SPI) End of Receiver Transfer +#define AT91C_SPI_SPENDTX (0x1 << 5) // (SPI) End of Receiver Transfer +#define AT91C_SPI_RXBUFF (0x1 << 6) // (SPI) RXBUFF Interrupt +#define AT91C_SPI_TXBUFE (0x1 << 7) // (SPI) TXBUFE Interrupt +#define AT91C_SPI_SPIENS (0x1 << 16) // (SPI) Enable Status +// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- +// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- +// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- +// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- +#define AT91C_SPI_CPOL (0x1 << 0) // (SPI) Clock Polarity +#define AT91C_SPI_NCPHA (0x1 << 1) // (SPI) Clock Phase +#define AT91C_SPI_BITS (0xF << 4) // (SPI) Bits Per Transfer +#define AT91C_SPI_BITS_8 (0x0 << 4) // (SPI) 8 Bits Per transfer +#define AT91C_SPI_BITS_9 (0x1 << 4) // (SPI) 9 Bits Per transfer +#define AT91C_SPI_BITS_10 (0x2 << 4) // (SPI) 10 Bits Per transfer +#define AT91C_SPI_BITS_11 (0x3 << 4) // (SPI) 11 Bits Per transfer +#define AT91C_SPI_BITS_12 (0x4 << 4) // (SPI) 12 Bits Per transfer +#define AT91C_SPI_BITS_13 (0x5 << 4) // (SPI) 13 Bits Per transfer +#define AT91C_SPI_BITS_14 (0x6 << 4) // (SPI) 14 Bits Per transfer +#define AT91C_SPI_BITS_15 (0x7 << 4) // (SPI) 15 Bits Per transfer +#define AT91C_SPI_BITS_16 (0x8 << 4) // (SPI) 16 Bits Per transfer +#define AT91C_SPI_SCBR (0xFF << 8) // (SPI) Serial Clock Baud Rate +#define AT91C_SPI_DLYBS (0xFF << 16) // (SPI) Serial Clock Baud Rate +#define AT91C_SPI_DLYBCT (0xFF << 24) // (SPI) Delay Between Consecutive Transfers + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface +// ***************************************************************************** +// *** Register offset in AT91S_SSC structure *** +#define SSC_CR ( 0) // Control Register +#define SSC_CMR ( 4) // Clock Mode Register +#define SSC_RCMR (16) // Receive Clock ModeRegister +#define SSC_RFMR (20) // Receive Frame Mode Register +#define SSC_TCMR (24) // Transmit Clock Mode Register +#define SSC_TFMR (28) // Transmit Frame Mode Register +#define SSC_RHR (32) // Receive Holding Register +#define SSC_THR (36) // Transmit Holding Register +#define SSC_RSHR (48) // Receive Sync Holding Register +#define SSC_TSHR (52) // Transmit Sync Holding Register +#define SSC_RC0R (56) // Receive Compare 0 Register +#define SSC_RC1R (60) // Receive Compare 1 Register +#define SSC_SR (64) // Status Register +#define SSC_IER (68) // Interrupt Enable Register +#define SSC_IDR (72) // Interrupt Disable Register +#define SSC_IMR (76) // Interrupt Mask Register +#define SSC_RPR (256) // Receive Pointer Register +#define SSC_RCR (260) // Receive Counter Register +#define SSC_TPR (264) // Transmit Pointer Register +#define SSC_TCR (268) // Transmit Counter Register +#define SSC_RNPR (272) // Receive Next Pointer Register +#define SSC_RNCR (276) // Receive Next Counter Register +#define SSC_TNPR (280) // Transmit Next Pointer Register +#define SSC_TNCR (284) // Transmit Next Counter Register +#define SSC_PTCR (288) // PDC Transfer Control Register +#define SSC_PTSR (292) // PDC Transfer Status Register +// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- +#define AT91C_SSC_RXEN (0x1 << 0) // (SSC) Receive Enable +#define AT91C_SSC_RXDIS (0x1 << 1) // (SSC) Receive Disable +#define AT91C_SSC_TXEN (0x1 << 8) // (SSC) Transmit Enable +#define AT91C_SSC_TXDIS (0x1 << 9) // (SSC) Transmit Disable +#define AT91C_SSC_SWRST (0x1 << 15) // (SSC) Software Reset +// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- +#define AT91C_SSC_CKS (0x3 << 0) // (SSC) Receive/Transmit Clock Selection +#define AT91C_SSC_CKS_DIV (0x0) // (SSC) Divided Clock +#define AT91C_SSC_CKS_TK (0x1) // (SSC) TK Clock signal +#define AT91C_SSC_CKS_RK (0x2) // (SSC) RK pin +#define AT91C_SSC_CKO (0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection +#define AT91C_SSC_CKO_NONE (0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only +#define AT91C_SSC_CKO_CONTINOUS (0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output +#define AT91C_SSC_CKO_DATA_TX (0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output +#define AT91C_SSC_CKI (0x1 << 5) // (SSC) Receive/Transmit Clock Inversion +#define AT91C_SSC_CKG (0x3 << 6) // (SSC) Receive/Transmit Clock Gating Selection +#define AT91C_SSC_CKG_NONE (0x0 << 6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock +#define AT91C_SSC_CKG_LOW (0x1 << 6) // (SSC) Receive/Transmit Clock enabled only if RF Low +#define AT91C_SSC_CKG_HIGH (0x2 << 6) // (SSC) Receive/Transmit Clock enabled only if RF High +#define AT91C_SSC_START (0xF << 8) // (SSC) Receive/Transmit Start Selection +#define AT91C_SSC_START_CONTINOUS (0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. +#define AT91C_SSC_START_TX (0x1 << 8) // (SSC) Transmit/Receive start +#define AT91C_SSC_START_LOW_RF (0x2 << 8) // (SSC) Detection of a low level on RF input +#define AT91C_SSC_START_HIGH_RF (0x3 << 8) // (SSC) Detection of a high level on RF input +#define AT91C_SSC_START_FALL_RF (0x4 << 8) // (SSC) Detection of a falling edge on RF input +#define AT91C_SSC_START_RISE_RF (0x5 << 8) // (SSC) Detection of a rising edge on RF input +#define AT91C_SSC_START_LEVEL_RF (0x6 << 8) // (SSC) Detection of any level change on RF input +#define AT91C_SSC_START_EDGE_RF (0x7 << 8) // (SSC) Detection of any edge on RF input +#define AT91C_SSC_START_0 (0x8 << 8) // (SSC) Compare 0 +#define AT91C_SSC_STOP (0x1 << 12) // (SSC) Receive Stop Selection +#define AT91C_SSC_STTOUT (0x1 << 15) // (SSC) Receive/Transmit Start Output Selection +#define AT91C_SSC_STTDLY (0xFF << 16) // (SSC) Receive/Transmit Start Delay +#define AT91C_SSC_PERIOD (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection +// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- +#define AT91C_SSC_DATLEN (0x1F << 0) // (SSC) Data Length +#define AT91C_SSC_LOOP (0x1 << 5) // (SSC) Loop Mode +#define AT91C_SSC_MSBF (0x1 << 7) // (SSC) Most Significant Bit First +#define AT91C_SSC_DATNB (0xF << 8) // (SSC) Data Number per Frame +#define AT91C_SSC_FSLEN (0xF << 16) // (SSC) Receive/Transmit Frame Sync length +#define AT91C_SSC_FSOS (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection +#define AT91C_SSC_FSOS_NONE (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only +#define AT91C_SSC_FSOS_NEGATIVE (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse +#define AT91C_SSC_FSOS_POSITIVE (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse +#define AT91C_SSC_FSOS_LOW (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer +#define AT91C_SSC_FSOS_HIGH (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer +#define AT91C_SSC_FSOS_TOGGLE (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer +#define AT91C_SSC_FSEDGE (0x1 << 24) // (SSC) Frame Sync Edge Detection +// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- +// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- +#define AT91C_SSC_DATDEF (0x1 << 5) // (SSC) Data Default Value +#define AT91C_SSC_FSDEN (0x1 << 23) // (SSC) Frame Sync Data Enable +// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- +#define AT91C_SSC_TXRDY (0x1 << 0) // (SSC) Transmit Ready +#define AT91C_SSC_TXEMPTY (0x1 << 1) // (SSC) Transmit Empty +#define AT91C_SSC_ENDTX (0x1 << 2) // (SSC) End Of Transmission +#define AT91C_SSC_TXBUFE (0x1 << 3) // (SSC) Transmit Buffer Empty +#define AT91C_SSC_RXRDY (0x1 << 4) // (SSC) Receive Ready +#define AT91C_SSC_OVRUN (0x1 << 5) // (SSC) Receive Overrun +#define AT91C_SSC_ENDRX (0x1 << 6) // (SSC) End of Reception +#define AT91C_SSC_RXBUFF (0x1 << 7) // (SSC) Receive Buffer Full +#define AT91C_SSC_CP0 (0x1 << 8) // (SSC) Compare 0 +#define AT91C_SSC_CP1 (0x1 << 9) // (SSC) Compare 1 +#define AT91C_SSC_TXSYN (0x1 << 10) // (SSC) Transmit Sync +#define AT91C_SSC_RXSYN (0x1 << 11) // (SSC) Receive Sync +#define AT91C_SSC_TXENA (0x1 << 16) // (SSC) Transmit Enable +#define AT91C_SSC_RXENA (0x1 << 17) // (SSC) Receive Enable +// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- +// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- +// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Usart +// ***************************************************************************** +// *** Register offset in AT91S_USART structure *** +#define US_CR ( 0) // Control Register +#define US_MR ( 4) // Mode Register +#define US_IER ( 8) // Interrupt Enable Register +#define US_IDR (12) // Interrupt Disable Register +#define US_IMR (16) // Interrupt Mask Register +#define US_CSR (20) // Channel Status Register +#define US_RHR (24) // Receiver Holding Register +#define US_THR (28) // Transmitter Holding Register +#define US_BRGR (32) // Baud Rate Generator Register +#define US_RTOR (36) // Receiver Time-out Register +#define US_TTGR (40) // Transmitter Time-guard Register +#define US_FIDI (64) // FI_DI_Ratio Register +#define US_NER (68) // Nb Errors Register +#define US_XXR (72) // XON_XOFF Register +#define US_IF (76) // IRDA_FILTER Register +#define US_RPR (256) // Receive Pointer Register +#define US_RCR (260) // Receive Counter Register +#define US_TPR (264) // Transmit Pointer Register +#define US_TCR (268) // Transmit Counter Register +#define US_RNPR (272) // Receive Next Pointer Register +#define US_RNCR (276) // Receive Next Counter Register +#define US_TNPR (280) // Transmit Next Pointer Register +#define US_TNCR (284) // Transmit Next Counter Register +#define US_PTCR (288) // PDC Transfer Control Register +#define US_PTSR (292) // PDC Transfer Status Register +// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- +#define AT91C_US_RSTSTA (0x1 << 8) // (USART) Reset Status Bits +#define AT91C_US_STTBRK (0x1 << 9) // (USART) Start Break +#define AT91C_US_STPBRK (0x1 << 10) // (USART) Stop Break +#define AT91C_US_STTTO (0x1 << 11) // (USART) Start Time-out +#define AT91C_US_SENDA (0x1 << 12) // (USART) Send Address +#define AT91C_US_RSTIT (0x1 << 13) // (USART) Reset Iterations +#define AT91C_US_RSTNACK (0x1 << 14) // (USART) Reset Non Acknowledge +#define AT91C_US_RETTO (0x1 << 15) // (USART) Rearm Time-out +#define AT91C_US_DTREN (0x1 << 16) // (USART) Data Terminal ready Enable +#define AT91C_US_DTRDIS (0x1 << 17) // (USART) Data Terminal ready Disable +#define AT91C_US_RTSEN (0x1 << 18) // (USART) Request to Send enable +#define AT91C_US_RTSDIS (0x1 << 19) // (USART) Request to Send Disable +// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- +#define AT91C_US_USMODE (0xF << 0) // (USART) Usart mode +#define AT91C_US_USMODE_NORMAL (0x0) // (USART) Normal +#define AT91C_US_USMODE_RS485 (0x1) // (USART) RS485 +#define AT91C_US_USMODE_HWHSH (0x2) // (USART) Hardware Handshaking +#define AT91C_US_USMODE_MODEM (0x3) // (USART) Modem +#define AT91C_US_USMODE_ISO7816_0 (0x4) // (USART) ISO7816 protocol: T = 0 +#define AT91C_US_USMODE_ISO7816_1 (0x6) // (USART) ISO7816 protocol: T = 1 +#define AT91C_US_USMODE_IRDA (0x8) // (USART) IrDA +#define AT91C_US_USMODE_SWHSH (0xC) // (USART) Software Handshaking +#define AT91C_US_CLKS (0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock +#define AT91C_US_CLKS_CLOCK (0x0 << 4) // (USART) Clock +#define AT91C_US_CLKS_FDIV1 (0x1 << 4) // (USART) fdiv1 +#define AT91C_US_CLKS_SLOW (0x2 << 4) // (USART) slow_clock (ARM) +#define AT91C_US_CLKS_EXT (0x3 << 4) // (USART) External (SCK) +#define AT91C_US_CHRL (0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock +#define AT91C_US_CHRL_5_BITS (0x0 << 6) // (USART) Character Length: 5 bits +#define AT91C_US_CHRL_6_BITS (0x1 << 6) // (USART) Character Length: 6 bits +#define AT91C_US_CHRL_7_BITS (0x2 << 6) // (USART) Character Length: 7 bits +#define AT91C_US_CHRL_8_BITS (0x3 << 6) // (USART) Character Length: 8 bits +#define AT91C_US_SYNC (0x1 << 8) // (USART) Synchronous Mode Select +#define AT91C_US_NBSTOP (0x3 << 12) // (USART) Number of Stop bits +#define AT91C_US_NBSTOP_1_BIT (0x0 << 12) // (USART) 1 stop bit +#define AT91C_US_NBSTOP_15_BIT (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits +#define AT91C_US_NBSTOP_2_BIT (0x2 << 12) // (USART) 2 stop bits +#define AT91C_US_MSBF (0x1 << 16) // (USART) Bit Order +#define AT91C_US_MODE9 (0x1 << 17) // (USART) 9-bit Character length +#define AT91C_US_CKLO (0x1 << 18) // (USART) Clock Output Select +#define AT91C_US_OVER (0x1 << 19) // (USART) Over Sampling Mode +#define AT91C_US_INACK (0x1 << 20) // (USART) Inhibit Non Acknowledge +#define AT91C_US_DSNACK (0x1 << 21) // (USART) Disable Successive NACK +#define AT91C_US_MAX_ITER (0x1 << 24) // (USART) Number of Repetitions +#define AT91C_US_FILTER (0x1 << 28) // (USART) Receive Line Filter +// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- +#define AT91C_US_RXBRK (0x1 << 2) // (USART) Break Received/End of Break +#define AT91C_US_TIMEOUT (0x1 << 8) // (USART) Receiver Time-out +#define AT91C_US_ITERATION (0x1 << 10) // (USART) Max number of Repetitions Reached +#define AT91C_US_NACK (0x1 << 13) // (USART) Non Acknowledge +#define AT91C_US_RIIC (0x1 << 16) // (USART) Ring INdicator Input Change Flag +#define AT91C_US_DSRIC (0x1 << 17) // (USART) Data Set Ready Input Change Flag +#define AT91C_US_DCDIC (0x1 << 18) // (USART) Data Carrier Flag +#define AT91C_US_CTSIC (0x1 << 19) // (USART) Clear To Send Input Change Flag +// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- +// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- +// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- +#define AT91C_US_RI (0x1 << 20) // (USART) Image of RI Input +#define AT91C_US_DSR (0x1 << 21) // (USART) Image of DSR Input +#define AT91C_US_DCD (0x1 << 22) // (USART) Image of DCD Input +#define AT91C_US_CTS (0x1 << 23) // (USART) Image of CTS Input + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Two-wire Interface +// ***************************************************************************** +// *** Register offset in AT91S_TWI structure *** +#define TWI_CR ( 0) // Control Register +#define TWI_MMR ( 4) // Master Mode Register +#define TWI_SMR ( 8) // Slave Mode Register +#define TWI_IADR (12) // Internal Address Register +#define TWI_CWGR (16) // Clock Waveform Generator Register +#define TWI_SR (32) // Status Register +#define TWI_IER (36) // Interrupt Enable Register +#define TWI_IDR (40) // Interrupt Disable Register +#define TWI_IMR (44) // Interrupt Mask Register +#define TWI_RHR (48) // Receive Holding Register +#define TWI_THR (52) // Transmit Holding Register +// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- +#define AT91C_TWI_START (0x1 << 0) // (TWI) Send a START Condition +#define AT91C_TWI_STOP (0x1 << 1) // (TWI) Send a STOP Condition +#define AT91C_TWI_MSEN (0x1 << 2) // (TWI) TWI Master Transfer Enabled +#define AT91C_TWI_MSDIS (0x1 << 3) // (TWI) TWI Master Transfer Disabled +#define AT91C_TWI_SVEN (0x1 << 4) // (TWI) TWI Slave Transfer Enabled +#define AT91C_TWI_SVDIS (0x1 << 5) // (TWI) TWI Slave Transfer Disabled +#define AT91C_TWI_SWRST (0x1 << 7) // (TWI) Software Reset +// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- +#define AT91C_TWI_IADRSZ (0x3 << 8) // (TWI) Internal Device Address Size +#define AT91C_TWI_IADRSZ_NO (0x0 << 8) // (TWI) No internal device address +#define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) // (TWI) One-byte internal device address +#define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) // (TWI) Two-byte internal device address +#define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) // (TWI) Three-byte internal device address +#define AT91C_TWI_MREAD (0x1 << 12) // (TWI) Master Read Direction +#define AT91C_TWI_DADR (0x7F << 16) // (TWI) Device Address +// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- +#define AT91C_TWI_SADR (0x7F << 16) // (TWI) Slave Device Address +// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- +#define AT91C_TWI_CLDIV (0xFF << 0) // (TWI) Clock Low Divider +#define AT91C_TWI_CHDIV (0xFF << 8) // (TWI) Clock High Divider +#define AT91C_TWI_CKDIV (0x7 << 16) // (TWI) Clock Divider +// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- +#define AT91C_TWI_TXCOMP (0x1 << 0) // (TWI) Transmission Completed +#define AT91C_TWI_RXRDY (0x1 << 1) // (TWI) Receive holding register ReaDY +#define AT91C_TWI_TXRDY (0x1 << 2) // (TWI) Transmit holding register ReaDY +#define AT91C_TWI_SVREAD (0x1 << 3) // (TWI) Slave Read +#define AT91C_TWI_SVACC (0x1 << 4) // (TWI) Slave Access +#define AT91C_TWI_GCACC (0x1 << 5) // (TWI) General Call Access +#define AT91C_TWI_OVRE (0x1 << 6) // (TWI) Overrun Error +#define AT91C_TWI_UNRE (0x1 << 7) // (TWI) Underrun Error +#define AT91C_TWI_NACK (0x1 << 8) // (TWI) Not Acknowledged +#define AT91C_TWI_ARBLST (0x1 << 9) // (TWI) Arbitration Lost +// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- +// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- +// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Multimedia Card Interface +// ***************************************************************************** +// *** Register offset in AT91S_MCI structure *** +#define MCI_CR ( 0) // MCI Control Register +#define MCI_MR ( 4) // MCI Mode Register +#define MCI_DTOR ( 8) // MCI Data Timeout Register +#define MCI_SDCR (12) // MCI SD Card Register +#define MCI_ARGR (16) // MCI Argument Register +#define MCI_CMDR (20) // MCI Command Register +#define MCI_RSPR (32) // MCI Response Register +#define MCI_RDR (48) // MCI Receive Data Register +#define MCI_TDR (52) // MCI Transmit Data Register +#define MCI_SR (64) // MCI Status Register +#define MCI_IER (68) // MCI Interrupt Enable Register +#define MCI_IDR (72) // MCI Interrupt Disable Register +#define MCI_IMR (76) // MCI Interrupt Mask Register +#define MCI_RPR (256) // Receive Pointer Register +#define MCI_RCR (260) // Receive Counter Register +#define MCI_TPR (264) // Transmit Pointer Register +#define MCI_TCR (268) // Transmit Counter Register +#define MCI_RNPR (272) // Receive Next Pointer Register +#define MCI_RNCR (276) // Receive Next Counter Register +#define MCI_TNPR (280) // Transmit Next Pointer Register +#define MCI_TNCR (284) // Transmit Next Counter Register +#define MCI_PTCR (288) // PDC Transfer Control Register +#define MCI_PTSR (292) // PDC Transfer Status Register +// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- +#define AT91C_MCI_MCIEN (0x1 << 0) // (MCI) Multimedia Interface Enable +#define AT91C_MCI_MCIDIS (0x1 << 1) // (MCI) Multimedia Interface Disable +#define AT91C_MCI_PWSEN (0x1 << 2) // (MCI) Power Save Mode Enable +#define AT91C_MCI_PWSDIS (0x1 << 3) // (MCI) Power Save Mode Disable +// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- +#define AT91C_MCI_CLKDIV (0x1 << 0) // (MCI) Clock Divider +#define AT91C_MCI_PWSDIV (0x1 << 8) // (MCI) Power Saving Divider +#define AT91C_MCI_PDCPADV (0x1 << 14) // (MCI) PDC Padding Value +#define AT91C_MCI_PDCMODE (0x1 << 15) // (MCI) PDC Oriented Mode +#define AT91C_MCI_BLKLEN (0x1 << 18) // (MCI) Data Block Length +// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- +#define AT91C_MCI_DTOCYC (0x1 << 0) // (MCI) Data Timeout Cycle Number +#define AT91C_MCI_DTOMUL (0x7 << 4) // (MCI) Data Timeout Multiplier +#define AT91C_MCI_DTOMUL_1 (0x0 << 4) // (MCI) DTOCYC x 1 +#define AT91C_MCI_DTOMUL_16 (0x1 << 4) // (MCI) DTOCYC x 16 +#define AT91C_MCI_DTOMUL_128 (0x2 << 4) // (MCI) DTOCYC x 128 +#define AT91C_MCI_DTOMUL_256 (0x3 << 4) // (MCI) DTOCYC x 256 +#define AT91C_MCI_DTOMUL_1024 (0x4 << 4) // (MCI) DTOCYC x 1024 +#define AT91C_MCI_DTOMUL_4096 (0x5 << 4) // (MCI) DTOCYC x 4096 +#define AT91C_MCI_DTOMUL_65536 (0x6 << 4) // (MCI) DTOCYC x 65536 +#define AT91C_MCI_DTOMUL_1048576 (0x7 << 4) // (MCI) DTOCYC x 1048576 +// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- +#define AT91C_MCI_SCDSEL (0x1 << 0) // (MCI) SD Card Selector +#define AT91C_MCI_SCDBUS (0x1 << 7) // (MCI) SD Card Bus Width +// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- +#define AT91C_MCI_CMDNB (0x1F << 0) // (MCI) Command Number +#define AT91C_MCI_RSPTYP (0x3 << 6) // (MCI) Response Type +#define AT91C_MCI_RSPTYP_NO (0x0 << 6) // (MCI) No response +#define AT91C_MCI_RSPTYP_48 (0x1 << 6) // (MCI) 48-bit response +#define AT91C_MCI_RSPTYP_136 (0x2 << 6) // (MCI) 136-bit response +#define AT91C_MCI_SPCMD (0x7 << 8) // (MCI) Special CMD +#define AT91C_MCI_SPCMD_NONE (0x0 << 8) // (MCI) Not a special CMD +#define AT91C_MCI_SPCMD_INIT (0x1 << 8) // (MCI) Initialization CMD +#define AT91C_MCI_SPCMD_SYNC (0x2 << 8) // (MCI) Synchronized CMD +#define AT91C_MCI_SPCMD_IT_CMD (0x4 << 8) // (MCI) Interrupt command +#define AT91C_MCI_SPCMD_IT_REP (0x5 << 8) // (MCI) Interrupt response +#define AT91C_MCI_OPDCMD (0x1 << 11) // (MCI) Open Drain Command +#define AT91C_MCI_MAXLAT (0x1 << 12) // (MCI) Maximum Latency for Command to respond +#define AT91C_MCI_TRCMD (0x3 << 16) // (MCI) Transfer CMD +#define AT91C_MCI_TRCMD_NO (0x0 << 16) // (MCI) No transfer +#define AT91C_MCI_TRCMD_START (0x1 << 16) // (MCI) Start transfer +#define AT91C_MCI_TRCMD_STOP (0x2 << 16) // (MCI) Stop transfer +#define AT91C_MCI_TRDIR (0x1 << 18) // (MCI) Transfer Direction +#define AT91C_MCI_TRTYP (0x3 << 19) // (MCI) Transfer Type +#define AT91C_MCI_TRTYP_BLOCK (0x0 << 19) // (MCI) Block Transfer type +#define AT91C_MCI_TRTYP_MULTIPLE (0x1 << 19) // (MCI) Multiple Block transfer type +#define AT91C_MCI_TRTYP_STREAM (0x2 << 19) // (MCI) Stream transfer type +// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- +#define AT91C_MCI_CMDRDY (0x1 << 0) // (MCI) Command Ready flag +#define AT91C_MCI_RXRDY (0x1 << 1) // (MCI) RX Ready flag +#define AT91C_MCI_TXRDY (0x1 << 2) // (MCI) TX Ready flag +#define AT91C_MCI_BLKE (0x1 << 3) // (MCI) Data Block Transfer Ended flag +#define AT91C_MCI_DTIP (0x1 << 4) // (MCI) Data Transfer in Progress flag +#define AT91C_MCI_NOTBUSY (0x1 << 5) // (MCI) Data Line Not Busy flag +#define AT91C_MCI_ENDRX (0x1 << 6) // (MCI) End of RX Buffer flag +#define AT91C_MCI_ENDTX (0x1 << 7) // (MCI) End of TX Buffer flag +#define AT91C_MCI_RXBUFF (0x1 << 14) // (MCI) RX Buffer Full flag +#define AT91C_MCI_TXBUFE (0x1 << 15) // (MCI) TX Buffer Empty flag +#define AT91C_MCI_RINDE (0x1 << 16) // (MCI) Response Index Error flag +#define AT91C_MCI_RDIRE (0x1 << 17) // (MCI) Response Direction Error flag +#define AT91C_MCI_RCRCE (0x1 << 18) // (MCI) Response CRC Error flag +#define AT91C_MCI_RENDE (0x1 << 19) // (MCI) Response End Bit Error flag +#define AT91C_MCI_RTOE (0x1 << 20) // (MCI) Response Time-out Error flag +#define AT91C_MCI_DCRCE (0x1 << 21) // (MCI) data CRC Error flag +#define AT91C_MCI_DTOE (0x1 << 22) // (MCI) Data timeout Error flag +#define AT91C_MCI_OVRE (0x1 << 30) // (MCI) Overrun flag +#define AT91C_MCI_UNRE (0x1 << 31) // (MCI) Underrun flag +// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- +// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- +// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR USB Device Interface +// ***************************************************************************** +// *** Register offset in AT91S_UDP structure *** +#define UDP_NUM ( 0) // Frame Number Register +#define UDP_GLBSTATE ( 4) // Global State Register +#define UDP_FADDR ( 8) // Function Address Register +#define UDP_IER (16) // Interrupt Enable Register +#define UDP_IDR (20) // Interrupt Disable Register +#define UDP_IMR (24) // Interrupt Mask Register +#define UDP_ISR (28) // Interrupt Status Register +#define UDP_ICR (32) // Interrupt Clear Register +#define UDP_RSTEP (40) // Reset Endpoint Register +#define UDP_CSR (48) // Endpoint Control and Status Register +#define UDP_FDR (80) // Endpoint FIFO Data Register +// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- +#define AT91C_UDP_FRM_NUM (0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats +#define AT91C_UDP_FRM_ERR (0x1 << 16) // (UDP) Frame Error +#define AT91C_UDP_FRM_OK (0x1 << 17) // (UDP) Frame OK +// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- +#define AT91C_UDP_FADDEN (0x1 << 0) // (UDP) Function Address Enable +#define AT91C_UDP_CONFG (0x1 << 1) // (UDP) Configured +#define AT91C_UDP_RMWUPE (0x1 << 2) // (UDP) Remote Wake Up Enable +#define AT91C_UDP_RSMINPR (0x1 << 3) // (UDP) A Resume Has Been Sent to the Host +// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- +#define AT91C_UDP_FADD (0xFF << 0) // (UDP) Function Address Value +#define AT91C_UDP_FEN (0x1 << 8) // (UDP) Function Enable +// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- +#define AT91C_UDP_EPINT0 (0x1 << 0) // (UDP) Endpoint 0 Interrupt +#define AT91C_UDP_EPINT1 (0x1 << 1) // (UDP) Endpoint 0 Interrupt +#define AT91C_UDP_EPINT2 (0x1 << 2) // (UDP) Endpoint 2 Interrupt +#define AT91C_UDP_EPINT3 (0x1 << 3) // (UDP) Endpoint 3 Interrupt +#define AT91C_UDP_EPINT4 (0x1 << 4) // (UDP) Endpoint 4 Interrupt +#define AT91C_UDP_EPINT5 (0x1 << 5) // (UDP) Endpoint 5 Interrupt +#define AT91C_UDP_EPINT6 (0x1 << 6) // (UDP) Endpoint 6 Interrupt +#define AT91C_UDP_EPINT7 (0x1 << 7) // (UDP) Endpoint 7 Interrupt +#define AT91C_UDP_RXSUSP (0x1 << 8) // (UDP) USB Suspend Interrupt +#define AT91C_UDP_RXRSM (0x1 << 9) // (UDP) USB Resume Interrupt +#define AT91C_UDP_EXTRSM (0x1 << 10) // (UDP) USB External Resume Interrupt +#define AT91C_UDP_SOFINT (0x1 << 11) // (UDP) USB Start Of frame Interrupt +#define AT91C_UDP_WAKEUP (0x1 << 13) // (UDP) USB Resume Interrupt +// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- +// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- +// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- +#define AT91C_UDP_ENDBUSRES (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt +// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- +// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- +#define AT91C_UDP_EP0 (0x1 << 0) // (UDP) Reset Endpoint 0 +#define AT91C_UDP_EP1 (0x1 << 1) // (UDP) Reset Endpoint 1 +#define AT91C_UDP_EP2 (0x1 << 2) // (UDP) Reset Endpoint 2 +#define AT91C_UDP_EP3 (0x1 << 3) // (UDP) Reset Endpoint 3 +#define AT91C_UDP_EP4 (0x1 << 4) // (UDP) Reset Endpoint 4 +#define AT91C_UDP_EP5 (0x1 << 5) // (UDP) Reset Endpoint 5 +#define AT91C_UDP_EP6 (0x1 << 6) // (UDP) Reset Endpoint 6 +#define AT91C_UDP_EP7 (0x1 << 7) // (UDP) Reset Endpoint 7 +// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- +#define AT91C_UDP_TXCOMP (0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR +#define AT91C_UDP_RX_DATA_BK0 (0x1 << 1) // (UDP) Receive Data Bank 0 +#define AT91C_UDP_RXSETUP (0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) +#define AT91C_UDP_ISOERROR (0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) +#define AT91C_UDP_TXPKTRDY (0x1 << 4) // (UDP) Transmit Packet Ready +#define AT91C_UDP_FORCESTALL (0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). +#define AT91C_UDP_RX_DATA_BK1 (0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). +#define AT91C_UDP_DIR (0x1 << 7) // (UDP) Transfer Direction +#define AT91C_UDP_EPTYPE (0x7 << 8) // (UDP) Endpoint type +#define AT91C_UDP_EPTYPE_CTRL (0x0 << 8) // (UDP) Control +#define AT91C_UDP_EPTYPE_ISO_OUT (0x1 << 8) // (UDP) Isochronous OUT +#define AT91C_UDP_EPTYPE_BULK_OUT (0x2 << 8) // (UDP) Bulk OUT +#define AT91C_UDP_EPTYPE_INT_OUT (0x3 << 8) // (UDP) Interrupt OUT +#define AT91C_UDP_EPTYPE_ISO_IN (0x5 << 8) // (UDP) Isochronous IN +#define AT91C_UDP_EPTYPE_BULK_IN (0x6 << 8) // (UDP) Bulk IN +#define AT91C_UDP_EPTYPE_INT_IN (0x7 << 8) // (UDP) Interrupt IN +#define AT91C_UDP_DTGLE (0x1 << 11) // (UDP) Data Toggle +#define AT91C_UDP_EPEDS (0x1 << 15) // (UDP) Endpoint Enable Disable +#define AT91C_UDP_RXBYTECNT (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface +// ***************************************************************************** +// *** Register offset in AT91S_TC structure *** +#define TC_CCR ( 0) // Channel Control Register +#define TC_CMR ( 4) // Channel Mode Register +#define TC_CV (16) // Counter Value +#define TC_RA (20) // Register A +#define TC_RB (24) // Register B +#define TC_RC (28) // Register C +#define TC_SR (32) // Status Register +#define TC_IER (36) // Interrupt Enable Register +#define TC_IDR (40) // Interrupt Disable Register +#define TC_IMR (44) // Interrupt Mask Register +// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- +#define AT91C_TC_CLKEN (0x1 << 0) // (TC) Counter Clock Enable Command +#define AT91C_TC_CLKDIS (0x1 << 1) // (TC) Counter Clock Disable Command +#define AT91C_TC_SWTRG (0x1 << 2) // (TC) Software Trigger Command +// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- +#define AT91C_TC_CPCSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RC Compare +#define AT91C_TC_CPCDIS (0x1 << 7) // (TC) Counter Clock Disable with RC Compare +#define AT91C_TC_EEVTEDG (0x3 << 8) // (TC) External Event Edge Selection +#define AT91C_TC_EEVTEDG_NONE (0x0 << 8) // (TC) Edge: None +#define AT91C_TC_EEVTEDG_RISING (0x1 << 8) // (TC) Edge: rising edge +#define AT91C_TC_EEVTEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge +#define AT91C_TC_EEVTEDG_BOTH (0x3 << 8) // (TC) Edge: each edge +#define AT91C_TC_EEVT (0x3 << 10) // (TC) External Event Selection +#define AT91C_TC_EEVT_NONE (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input +#define AT91C_TC_EEVT_RISING (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output +#define AT91C_TC_EEVT_FALLING (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output +#define AT91C_TC_EEVT_BOTH (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output +#define AT91C_TC_ENETRG (0x1 << 12) // (TC) External Event Trigger enable +#define AT91C_TC_WAVESEL (0x3 << 13) // (TC) Waveform Selection +#define AT91C_TC_WAVESEL_UP (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UPDOWN (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UP_AUTO (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UPDOWN_AUTO (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare +#define AT91C_TC_CPCTRG (0x1 << 14) // (TC) RC Compare Trigger Enable +#define AT91C_TC_WAVE (0x1 << 15) // (TC) +#define AT91C_TC_ACPA (0x3 << 16) // (TC) RA Compare Effect on TIOA +#define AT91C_TC_ACPA_NONE (0x0 << 16) // (TC) Effect: none +#define AT91C_TC_ACPA_SET (0x1 << 16) // (TC) Effect: set +#define AT91C_TC_ACPA_CLEAR (0x2 << 16) // (TC) Effect: clear +#define AT91C_TC_ACPA_TOGGLE (0x3 << 16) // (TC) Effect: toggle +#define AT91C_TC_ACPC (0x3 << 18) // (TC) RC Compare Effect on TIOA +#define AT91C_TC_ACPC_NONE (0x0 << 18) // (TC) Effect: none +#define AT91C_TC_ACPC_SET (0x1 << 18) // (TC) Effect: set +#define AT91C_TC_ACPC_CLEAR (0x2 << 18) // (TC) Effect: clear +#define AT91C_TC_ACPC_TOGGLE (0x3 << 18) // (TC) Effect: toggle +#define AT91C_TC_AEEVT (0x3 << 20) // (TC) External Event Effect on TIOA +#define AT91C_TC_AEEVT_NONE (0x0 << 20) // (TC) Effect: none +#define AT91C_TC_AEEVT_SET (0x1 << 20) // (TC) Effect: set +#define AT91C_TC_AEEVT_CLEAR (0x2 << 20) // (TC) Effect: clear +#define AT91C_TC_AEEVT_TOGGLE (0x3 << 20) // (TC) Effect: toggle +#define AT91C_TC_ASWTRG (0x3 << 22) // (TC) Software Trigger Effect on TIOA +#define AT91C_TC_ASWTRG_NONE (0x0 << 22) // (TC) Effect: none +#define AT91C_TC_ASWTRG_SET (0x1 << 22) // (TC) Effect: set +#define AT91C_TC_ASWTRG_CLEAR (0x2 << 22) // (TC) Effect: clear +#define AT91C_TC_ASWTRG_TOGGLE (0x3 << 22) // (TC) Effect: toggle +#define AT91C_TC_BCPB (0x3 << 24) // (TC) RB Compare Effect on TIOB +#define AT91C_TC_BCPB_NONE (0x0 << 24) // (TC) Effect: none +#define AT91C_TC_BCPB_SET (0x1 << 24) // (TC) Effect: set +#define AT91C_TC_BCPB_CLEAR (0x2 << 24) // (TC) Effect: clear +#define AT91C_TC_BCPB_TOGGLE (0x3 << 24) // (TC) Effect: toggle +#define AT91C_TC_BCPC (0x3 << 26) // (TC) RC Compare Effect on TIOB +#define AT91C_TC_BCPC_NONE (0x0 << 26) // (TC) Effect: none +#define AT91C_TC_BCPC_SET (0x1 << 26) // (TC) Effect: set +#define AT91C_TC_BCPC_CLEAR (0x2 << 26) // (TC) Effect: clear +#define AT91C_TC_BCPC_TOGGLE (0x3 << 26) // (TC) Effect: toggle +#define AT91C_TC_BEEVT (0x3 << 28) // (TC) External Event Effect on TIOB +#define AT91C_TC_BEEVT_NONE (0x0 << 28) // (TC) Effect: none +#define AT91C_TC_BEEVT_SET (0x1 << 28) // (TC) Effect: set +#define AT91C_TC_BEEVT_CLEAR (0x2 << 28) // (TC) Effect: clear +#define AT91C_TC_BEEVT_TOGGLE (0x3 << 28) // (TC) Effect: toggle +#define AT91C_TC_BSWTRG (0x3 << 30) // (TC) Software Trigger Effect on TIOB +#define AT91C_TC_BSWTRG_NONE (0x0 << 30) // (TC) Effect: none +#define AT91C_TC_BSWTRG_SET (0x1 << 30) // (TC) Effect: set +#define AT91C_TC_BSWTRG_CLEAR (0x2 << 30) // (TC) Effect: clear +#define AT91C_TC_BSWTRG_TOGGLE (0x3 << 30) // (TC) Effect: toggle +// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- +#define AT91C_TC_COVFS (0x1 << 0) // (TC) Counter Overflow +#define AT91C_TC_LOVRS (0x1 << 1) // (TC) Load Overrun +#define AT91C_TC_CPAS (0x1 << 2) // (TC) RA Compare +#define AT91C_TC_CPBS (0x1 << 3) // (TC) RB Compare +#define AT91C_TC_CPCS (0x1 << 4) // (TC) RC Compare +#define AT91C_TC_LDRAS (0x1 << 5) // (TC) RA Loading +#define AT91C_TC_LDRBS (0x1 << 6) // (TC) RB Loading +#define AT91C_TC_ETRCS (0x1 << 7) // (TC) External Trigger +#define AT91C_TC_ETRGS (0x1 << 16) // (TC) Clock Enabling +#define AT91C_TC_MTIOA (0x1 << 17) // (TC) TIOA Mirror +#define AT91C_TC_MTIOB (0x1 << 18) // (TC) TIOA Mirror +// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- +// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- +// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Timer Counter Interface +// ***************************************************************************** +// *** Register offset in AT91S_TCB structure *** +#define TCB_TC0 ( 0) // TC Channel 0 +#define TCB_TC1 (64) // TC Channel 1 +#define TCB_TC2 (128) // TC Channel 2 +#define TCB_BCR (192) // TC Block Control Register +#define TCB_BMR (196) // TC Block Mode Register +// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- +#define AT91C_TCB_SYNC (0x1 << 0) // (TCB) Synchro Command +// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- +#define AT91C_TCB_TC0XC0S (0x1 << 0) // (TCB) External Clock Signal 0 Selection +#define AT91C_TCB_TC0XC0S_TCLK0 (0x0) // (TCB) TCLK0 connected to XC0 +#define AT91C_TCB_TC0XC0S_NONE (0x1) // (TCB) None signal connected to XC0 +#define AT91C_TCB_TC0XC0S_TIOA1 (0x2) // (TCB) TIOA1 connected to XC0 +#define AT91C_TCB_TC0XC0S_TIOA2 (0x3) // (TCB) TIOA2 connected to XC0 +#define AT91C_TCB_TC1XC1S (0x1 << 2) // (TCB) External Clock Signal 1 Selection +#define AT91C_TCB_TC1XC1S_TCLK1 (0x0 << 2) // (TCB) TCLK1 connected to XC1 +#define AT91C_TCB_TC1XC1S_NONE (0x1 << 2) // (TCB) None signal connected to XC1 +#define AT91C_TCB_TC1XC1S_TIOA0 (0x2 << 2) // (TCB) TIOA0 connected to XC1 +#define AT91C_TCB_TC1XC1S_TIOA2 (0x3 << 2) // (TCB) TIOA2 connected to XC1 +#define AT91C_TCB_TC2XC2S (0x1 << 4) // (TCB) External Clock Signal 2 Selection +#define AT91C_TCB_TC2XC2S_TCLK2 (0x0 << 4) // (TCB) TCLK2 connected to XC2 +#define AT91C_TCB_TC2XC2S_NONE (0x1 << 4) // (TCB) None signal connected to XC2 +#define AT91C_TCB_TC2XC2S_TIOA0 (0x2 << 4) // (TCB) TIOA0 connected to XC2 +#define AT91C_TCB_TC2XC2S_TIOA2 (0x3 << 4) // (TCB) TIOA2 connected to XC2 + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR USB Host Interface +// ***************************************************************************** +// *** Register offset in AT91S_UHP structure *** +#define UHP_HcRevision ( 0) // Revision +#define UHP_HcControl ( 4) // Operating modes for the Host Controller +#define UHP_HcCommandStatus ( 8) // Command & status Register +#define UHP_HcInterruptStatus (12) // Interrupt Status Register +#define UHP_HcInterruptEnable (16) // Interrupt Enable Register +#define UHP_HcInterruptDisable (20) // Interrupt Disable Register +#define UHP_HcHCCA (24) // Pointer to the Host Controller Communication Area +#define UHP_HcPeriodCurrentED (28) // Current Isochronous or Interrupt Endpoint Descriptor +#define UHP_HcControlHeadED (32) // First Endpoint Descriptor of the Control list +#define UHP_HcControlCurrentED (36) // Endpoint Control and Status Register +#define UHP_HcBulkHeadED (40) // First endpoint register of the Bulk list +#define UHP_HcBulkCurrentED (44) // Current endpoint of the Bulk list +#define UHP_HcBulkDoneHead (48) // Last completed transfer descriptor +#define UHP_HcFmInterval (52) // Bit time between 2 consecutive SOFs +#define UHP_HcFmRemaining (56) // Bit time remaining in the current Frame +#define UHP_HcFmNumber (60) // Frame number +#define UHP_HcPeriodicStart (64) // Periodic Start +#define UHP_HcLSThreshold (68) // LS Threshold +#define UHP_HcRhDescriptorA (72) // Root Hub characteristics A +#define UHP_HcRhDescriptorB (76) // Root Hub characteristics B +#define UHP_HcRhStatus (80) // Root Hub Status register +#define UHP_HcRhPortStatus (84) // Root Hub Port Status Register + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Ethernet MAC +// ***************************************************************************** +// *** Register offset in AT91S_EMAC structure *** +#define EMAC_CTL ( 0) // Network Control Register +#define EMAC_CFG ( 4) // Network Configuration Register +#define EMAC_SR ( 8) // Network Status Register +#define EMAC_TAR (12) // Transmit Address Register +#define EMAC_TCR (16) // Transmit Control Register +#define EMAC_TSR (20) // Transmit Status Register +#define EMAC_RBQP (24) // Receive Buffer Queue Pointer +#define EMAC_RSR (32) // Receive Status Register +#define EMAC_ISR (36) // Interrupt Status Register +#define EMAC_IER (40) // Interrupt Enable Register +#define EMAC_IDR (44) // Interrupt Disable Register +#define EMAC_IMR (48) // Interrupt Mask Register +#define EMAC_MAN (52) // PHY Maintenance Register +#define EMAC_FRA (64) // Frames Transmitted OK Register +#define EMAC_SCOL (68) // Single Collision Frame Register +#define EMAC_MCOL (72) // Multiple Collision Frame Register +#define EMAC_OK (76) // Frames Received OK Register +#define EMAC_SEQE (80) // Frame Check Sequence Error Register +#define EMAC_ALE (84) // Alignment Error Register +#define EMAC_DTE (88) // Deferred Transmission Frame Register +#define EMAC_LCOL (92) // Late Collision Register +#define EMAC_ECOL (96) // Excessive Collision Register +#define EMAC_CSE (100) // Carrier Sense Error Register +#define EMAC_TUE (104) // Transmit Underrun Error Register +#define EMAC_CDE (108) // Code Error Register +#define EMAC_ELR (112) // Excessive Length Error Register +#define EMAC_RJB (116) // Receive Jabber Register +#define EMAC_USF (120) // Undersize Frame Register +#define EMAC_SQEE (124) // SQE Test Error Register +#define EMAC_DRFC (128) // Discarded RX Frame Register +#define EMAC_HSH (144) // Hash Address High[63:32] +#define EMAC_HSL (148) // Hash Address Low[31:0] +#define EMAC_SA1L (152) // Specific Address 1 Low, First 4 bytes +#define EMAC_SA1H (156) // Specific Address 1 High, Last 2 bytes +#define EMAC_SA2L (160) // Specific Address 2 Low, First 4 bytes +#define EMAC_SA2H (164) // Specific Address 2 High, Last 2 bytes +#define EMAC_SA3L (168) // Specific Address 3 Low, First 4 bytes +#define EMAC_SA3H (172) // Specific Address 3 High, Last 2 bytes +#define EMAC_SA4L (176) // Specific Address 4 Low, First 4 bytes +#define EMAC_SA4H (180) // Specific Address 4 High, Last 2 bytesr +// -------- EMAC_CTL : (EMAC Offset: 0x0) -------- +#define AT91C_EMAC_LB (0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level. +#define AT91C_EMAC_LBL (0x1 << 1) // (EMAC) Loopback local. +#define AT91C_EMAC_RE (0x1 << 2) // (EMAC) Receive enable. +#define AT91C_EMAC_TE (0x1 << 3) // (EMAC) Transmit enable. +#define AT91C_EMAC_MPE (0x1 << 4) // (EMAC) Management port enable. +#define AT91C_EMAC_CSR (0x1 << 5) // (EMAC) Clear statistics registers. +#define AT91C_EMAC_ISR (0x1 << 6) // (EMAC) Increment statistics registers. +#define AT91C_EMAC_WES (0x1 << 7) // (EMAC) Write enable for statistics registers. +#define AT91C_EMAC_BP (0x1 << 8) // (EMAC) Back pressure. +// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- +#define AT91C_EMAC_SPD (0x1 << 0) // (EMAC) Speed. +#define AT91C_EMAC_FD (0x1 << 1) // (EMAC) Full duplex. +#define AT91C_EMAC_BR (0x1 << 2) // (EMAC) Bit rate. +#define AT91C_EMAC_CAF (0x1 << 4) // (EMAC) Copy all frames. +#define AT91C_EMAC_NBC (0x1 << 5) // (EMAC) No broadcast. +#define AT91C_EMAC_MTI (0x1 << 6) // (EMAC) Multicast hash enable +#define AT91C_EMAC_UNI (0x1 << 7) // (EMAC) Unicast hash enable. +#define AT91C_EMAC_BIG (0x1 << 8) // (EMAC) Receive 1522 bytes. +#define AT91C_EMAC_EAE (0x1 << 9) // (EMAC) External address match enable. +#define AT91C_EMAC_CLK (0x3 << 10) // (EMAC) +#define AT91C_EMAC_CLK_HCLK_8 (0x0 << 10) // (EMAC) HCLK divided by 8 +#define AT91C_EMAC_CLK_HCLK_16 (0x1 << 10) // (EMAC) HCLK divided by 16 +#define AT91C_EMAC_CLK_HCLK_32 (0x2 << 10) // (EMAC) HCLK divided by 32 +#define AT91C_EMAC_CLK_HCLK_64 (0x3 << 10) // (EMAC) HCLK divided by 64 +#define AT91C_EMAC_RTY (0x1 << 12) // (EMAC) +#define AT91C_EMAC_RMII (0x1 << 13) // (EMAC) +// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- +#define AT91C_EMAC_MDIO (0x1 << 1) // (EMAC) +#define AT91C_EMAC_IDLE (0x1 << 2) // (EMAC) +// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- +#define AT91C_EMAC_LEN (0x7FF << 0) // (EMAC) +#define AT91C_EMAC_NCRC (0x1 << 15) // (EMAC) +// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- +#define AT91C_EMAC_OVR (0x1 << 0) // (EMAC) +#define AT91C_EMAC_COL (0x1 << 1) // (EMAC) +#define AT91C_EMAC_RLE (0x1 << 2) // (EMAC) +#define AT91C_EMAC_TXIDLE (0x1 << 3) // (EMAC) +#define AT91C_EMAC_BNQ (0x1 << 4) // (EMAC) +#define AT91C_EMAC_COMP (0x1 << 5) // (EMAC) +#define AT91C_EMAC_UND (0x1 << 6) // (EMAC) +// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- +#define AT91C_EMAC_BNA (0x1 << 0) // (EMAC) +#define AT91C_EMAC_REC (0x1 << 1) // (EMAC) +// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- +#define AT91C_EMAC_DONE (0x1 << 0) // (EMAC) +#define AT91C_EMAC_RCOM (0x1 << 1) // (EMAC) +#define AT91C_EMAC_RBNA (0x1 << 2) // (EMAC) +#define AT91C_EMAC_TOVR (0x1 << 3) // (EMAC) +#define AT91C_EMAC_TUND (0x1 << 4) // (EMAC) +#define AT91C_EMAC_RTRY (0x1 << 5) // (EMAC) +#define AT91C_EMAC_TBRE (0x1 << 6) // (EMAC) +#define AT91C_EMAC_TCOM (0x1 << 7) // (EMAC) +#define AT91C_EMAC_TIDLE (0x1 << 8) // (EMAC) +#define AT91C_EMAC_LINK (0x1 << 9) // (EMAC) +#define AT91C_EMAC_ROVR (0x1 << 10) // (EMAC) +#define AT91C_EMAC_HRESP (0x1 << 11) // (EMAC) +// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- +// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- +// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- +// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- +#define AT91C_EMAC_DATA (0xFFFF << 0) // (EMAC) +#define AT91C_EMAC_CODE (0x3 << 16) // (EMAC) +#define AT91C_EMAC_REGA (0x1F << 18) // (EMAC) +#define AT91C_EMAC_PHYA (0x1F << 23) // (EMAC) +#define AT91C_EMAC_RW (0x3 << 28) // (EMAC) +#define AT91C_EMAC_HIGH (0x1 << 30) // (EMAC) +#define AT91C_EMAC_LOW (0x1 << 31) // (EMAC) + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR External Bus Interface +// ***************************************************************************** +// *** Register offset in AT91S_EBI structure *** +#define EBI_CSA ( 0) // Chip Select Assignment Register +#define EBI_CFGR ( 4) // Configuration Register +// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- +#define AT91C_EBI_CS0A (0x1 << 0) // (EBI) Chip Select 0 Assignment +#define AT91C_EBI_CS0A_SMC (0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller. +#define AT91C_EBI_CS0A_BFC (0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller. +#define AT91C_EBI_CS1A (0x1 << 1) // (EBI) Chip Select 1 Assignment +#define AT91C_EBI_CS1A_SMC (0x0 << 1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller. +#define AT91C_EBI_CS1A_SDRAMC (0x1 << 1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller. +#define AT91C_EBI_CS3A (0x1 << 3) // (EBI) Chip Select 3 Assignment +#define AT91C_EBI_CS3A_SMC (0x0 << 3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. +#define AT91C_EBI_CS3A_SMC_SmartMedia (0x1 << 3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. +#define AT91C_EBI_CS4A (0x1 << 4) // (EBI) Chip Select 4 Assignment +#define AT91C_EBI_CS4A_SMC (0x0 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. +#define AT91C_EBI_CS4A_SMC_CompactFlash (0x1 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. +// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- +#define AT91C_EBI_DBPUC (0x1 << 0) // (EBI) Data Bus Pull-Up Configuration +#define AT91C_EBI_EBSEN (0x1 << 1) // (EBI) Bus Sharing Enable + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface +// ***************************************************************************** +// *** Register offset in AT91S_SMC2 structure *** +#define SMC2_CSR ( 0) // SMC2 Chip Select Register +// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- +#define AT91C_SMC2_NWS (0x7F << 0) // (SMC2) Number of Wait States +#define AT91C_SMC2_WSEN (0x1 << 7) // (SMC2) Wait State Enable +#define AT91C_SMC2_TDF (0xF << 8) // (SMC2) Data Float Time +#define AT91C_SMC2_BAT (0x1 << 12) // (SMC2) Byte Access Type +#define AT91C_SMC2_DBW (0x1 << 13) // (SMC2) Data Bus Width +#define AT91C_SMC2_DBW_16 (0x1 << 13) // (SMC2) 16-bit. +#define AT91C_SMC2_DBW_8 (0x2 << 13) // (SMC2) 8-bit. +#define AT91C_SMC2_DRP (0x1 << 15) // (SMC2) Data Read Protocol +#define AT91C_SMC2_ACSS (0x3 << 16) // (SMC2) Address to Chip Select Setup +#define AT91C_SMC2_ACSS_STANDARD (0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. +#define AT91C_SMC2_ACSS_1_CYCLE (0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access. +#define AT91C_SMC2_ACSS_2_CYCLES (0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access. +#define AT91C_SMC2_ACSS_3_CYCLES (0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access. +#define AT91C_SMC2_RWSETUP (0x7 << 24) // (SMC2) Read and Write Signal Setup Time +#define AT91C_SMC2_RWHOLD (0x7 << 29) // (SMC2) Read and Write Signal Hold Time + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR SDRAM Controller Interface +// ***************************************************************************** +// *** Register offset in AT91S_SDRC structure *** +#define SDRC_MR ( 0) // SDRAM Controller Mode Register +#define SDRC_TR ( 4) // SDRAM Controller Refresh Timer Register +#define SDRC_CR ( 8) // SDRAM Controller Configuration Register +#define SDRC_SRR (12) // SDRAM Controller Self Refresh Register +#define SDRC_LPR (16) // SDRAM Controller Low Power Register +#define SDRC_IER (20) // SDRAM Controller Interrupt Enable Register +#define SDRC_IDR (24) // SDRAM Controller Interrupt Disable Register +#define SDRC_IMR (28) // SDRAM Controller Interrupt Mask Register +#define SDRC_ISR (32) // SDRAM Controller Interrupt Mask Register +// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- +#define AT91C_SDRC_MODE (0xF << 0) // (SDRC) Mode +#define AT91C_SDRC_MODE_NORMAL_CMD (0x0) // (SDRC) Normal Mode +#define AT91C_SDRC_MODE_NOP_CMD (0x1) // (SDRC) NOP Command +#define AT91C_SDRC_MODE_PRCGALL_CMD (0x2) // (SDRC) All Banks Precharge Command +#define AT91C_SDRC_MODE_LMR_CMD (0x3) // (SDRC) Load Mode Register Command +#define AT91C_SDRC_MODE_RFSH_CMD (0x4) // (SDRC) Refresh Command +#define AT91C_SDRC_DBW (0x1 << 4) // (SDRC) Data Bus Width +#define AT91C_SDRC_DBW_32_BITS (0x0 << 4) // (SDRC) 32 Bits datas bus +#define AT91C_SDRC_DBW_16_BITS (0x1 << 4) // (SDRC) 16 Bits datas bus +// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- +#define AT91C_SDRC_COUNT (0xFFF << 0) // (SDRC) Refresh Counter +// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- +#define AT91C_SDRC_NC (0x3 << 0) // (SDRC) Number of Column Bits +#define AT91C_SDRC_NC_8 (0x0) // (SDRC) 8 Bits +#define AT91C_SDRC_NC_9 (0x1) // (SDRC) 9 Bits +#define AT91C_SDRC_NC_10 (0x2) // (SDRC) 10 Bits +#define AT91C_SDRC_NC_11 (0x3) // (SDRC) 11 Bits +#define AT91C_SDRC_NR (0x3 << 2) // (SDRC) Number of Row Bits +#define AT91C_SDRC_NR_11 (0x0 << 2) // (SDRC) 11 Bits +#define AT91C_SDRC_NR_12 (0x1 << 2) // (SDRC) 12 Bits +#define AT91C_SDRC_NR_13 (0x2 << 2) // (SDRC) 13 Bits +#define AT91C_SDRC_NB (0x1 << 4) // (SDRC) Number of Banks +#define AT91C_SDRC_NB_2_BANKS (0x0 << 4) // (SDRC) 2 banks +#define AT91C_SDRC_NB_4_BANKS (0x1 << 4) // (SDRC) 4 banks +#define AT91C_SDRC_CAS (0x3 << 5) // (SDRC) CAS Latency +#define AT91C_SDRC_CAS_2 (0x2 << 5) // (SDRC) 2 cycles +#define AT91C_SDRC_TWR (0xF << 7) // (SDRC) Number of Write Recovery Time Cycles +#define AT91C_SDRC_TRC (0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles +#define AT91C_SDRC_TRP (0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles +#define AT91C_SDRC_TRCD (0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles +#define AT91C_SDRC_TRAS (0xF << 23) // (SDRC) Number of RAS Active Time Cycles +#define AT91C_SDRC_TXSR (0xF << 27) // (SDRC) Number of Command Recovery Time Cycles +// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- +#define AT91C_SDRC_SRCB (0x1 << 0) // (SDRC) Self-refresh Command Bit +// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- +#define AT91C_SDRC_LPCB (0x1 << 0) // (SDRC) Low-power Command Bit +// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- +#define AT91C_SDRC_RES (0x1 << 0) // (SDRC) Refresh Error Status +// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- +// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- +// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Burst Flash Controller Interface +// ***************************************************************************** +// *** Register offset in AT91S_BFC structure *** +#define BFC_MR ( 0) // BFC Mode Register +// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- +#define AT91C_BFC_BFCOM (0x3 << 0) // (BFC) Burst Flash Controller Operating Mode +#define AT91C_BFC_BFCOM_DISABLED (0x0) // (BFC) NPCS0 is driven by the SMC or remains high. +#define AT91C_BFC_BFCOM_ASYNC (0x1) // (BFC) Asynchronous +#define AT91C_BFC_BFCOM_BURST_READ (0x2) // (BFC) Burst Read +#define AT91C_BFC_BFCC (0x3 << 2) // (BFC) Burst Flash Controller Operating Mode +#define AT91C_BFC_BFCC_MCK (0x1 << 2) // (BFC) Master Clock. +#define AT91C_BFC_BFCC_MCK_DIV_2 (0x2 << 2) // (BFC) Master Clock divided by 2. +#define AT91C_BFC_BFCC_MCK_DIV_4 (0x3 << 2) // (BFC) Master Clock divided by 4. +#define AT91C_BFC_AVL (0xF << 4) // (BFC) Address Valid Latency +#define AT91C_BFC_PAGES (0x7 << 8) // (BFC) Page Size +#define AT91C_BFC_PAGES_NO_PAGE (0x0 << 8) // (BFC) No page handling. +#define AT91C_BFC_PAGES_16 (0x1 << 8) // (BFC) 16 bytes page size. +#define AT91C_BFC_PAGES_32 (0x2 << 8) // (BFC) 32 bytes page size. +#define AT91C_BFC_PAGES_64 (0x3 << 8) // (BFC) 64 bytes page size. +#define AT91C_BFC_PAGES_128 (0x4 << 8) // (BFC) 128 bytes page size. +#define AT91C_BFC_PAGES_256 (0x5 << 8) // (BFC) 256 bytes page size. +#define AT91C_BFC_PAGES_512 (0x6 << 8) // (BFC) 512 bytes page size. +#define AT91C_BFC_PAGES_1024 (0x7 << 8) // (BFC) 1024 bytes page size. +#define AT91C_BFC_OEL (0x3 << 12) // (BFC) Output Enable Latency +#define AT91C_BFC_BAAEN (0x1 << 16) // (BFC) Burst Address Advance Enable +#define AT91C_BFC_BFOEH (0x1 << 17) // (BFC) Burst Flash Output Enable Handling +#define AT91C_BFC_MUXEN (0x1 << 18) // (BFC) Multiplexed Bus Enable +#define AT91C_BFC_RDYEN (0x1 << 19) // (BFC) Ready Enable Mode + +// ***************************************************************************** +// REGISTER ADDRESS DEFINITION FOR AT91RM9200 +// ***************************************************************************** +// ========== Register definition for SYS peripheral ========== +// ========== Register definition for MC peripheral ========== +#define AT91C_MC_PUER (0xFFFFFF54) // (MC) MC Protection Unit Enable Register +#define AT91C_MC_ASR (0xFFFFFF04) // (MC) MC Abort Status Register +#define AT91C_MC_PUP (0xFFFFFF50) // (MC) MC Protection Unit Peripherals +#define AT91C_MC_PUIA (0xFFFFFF10) // (MC) MC Protection Unit Area +#define AT91C_MC_AASR (0xFFFFFF08) // (MC) MC Abort Address Status Register +#define AT91C_MC_RCR (0xFFFFFF00) // (MC) MC Remap Control Register +// ========== Register definition for RTC peripheral ========== +#define AT91C_RTC_IMR (0xFFFFFE28) // (RTC) Interrupt Mask Register +#define AT91C_RTC_IER (0xFFFFFE20) // (RTC) Interrupt Enable Register +#define AT91C_RTC_SR (0xFFFFFE18) // (RTC) Status Register +#define AT91C_RTC_TIMALR (0xFFFFFE10) // (RTC) Time Alarm Register +#define AT91C_RTC_TIMR (0xFFFFFE08) // (RTC) Time Register +#define AT91C_RTC_CR (0xFFFFFE00) // (RTC) Control Register +#define AT91C_RTC_VER (0xFFFFFE2C) // (RTC) Valid Entry Register +#define AT91C_RTC_IDR (0xFFFFFE24) // (RTC) Interrupt Disable Register +#define AT91C_RTC_SCCR (0xFFFFFE1C) // (RTC) Status Clear Command Register +#define AT91C_RTC_CALALR (0xFFFFFE14) // (RTC) Calendar Alarm Register +#define AT91C_RTC_CALR (0xFFFFFE0C) // (RTC) Calendar Register +#define AT91C_RTC_MR (0xFFFFFE04) // (RTC) Mode Register +// ========== Register definition for ST peripheral ========== +#define AT91C_ST_CRTR (0xFFFFFD24) // (ST) Current Real-time Register +#define AT91C_ST_IMR (0xFFFFFD1C) // (ST) Interrupt Mask Register +#define AT91C_ST_IER (0xFFFFFD14) // (ST) Interrupt Enable Register +#define AT91C_ST_RTMR (0xFFFFFD0C) // (ST) Real-time Mode Register +#define AT91C_ST_PIMR (0xFFFFFD04) // (ST) Period Interval Mode Register +#define AT91C_ST_RTAR (0xFFFFFD20) // (ST) Real-time Alarm Register +#define AT91C_ST_IDR (0xFFFFFD18) // (ST) Interrupt Disable Register +#define AT91C_ST_SR (0xFFFFFD10) // (ST) Status Register +#define AT91C_ST_WDMR (0xFFFFFD08) // (ST) Watchdog Mode Register +#define AT91C_ST_CR (0xFFFFFD00) // (ST) Control Register +// ========== Register definition for PMC peripheral ========== +#define AT91C_PMC_SCSR (0xFFFFFC08) // (PMC) System Clock Status Register +#define AT91C_PMC_SCER (0xFFFFFC00) // (PMC) System Clock Enable Register +#define AT91C_PMC_IMR (0xFFFFFC6C) // (PMC) Interrupt Mask Register +#define AT91C_PMC_IDR (0xFFFFFC64) // (PMC) Interrupt Disable Register +#define AT91C_PMC_PCDR (0xFFFFFC14) // (PMC) Peripheral Clock Disable Register +#define AT91C_PMC_SCDR (0xFFFFFC04) // (PMC) System Clock Disable Register +#define AT91C_PMC_SR (0xFFFFFC68) // (PMC) Status Register +#define AT91C_PMC_IER (0xFFFFFC60) // (PMC) Interrupt Enable Register +#define AT91C_PMC_MCKR (0xFFFFFC30) // (PMC) Master Clock Register +#define AT91C_PMC_PCER (0xFFFFFC10) // (PMC) Peripheral Clock Enable Register +#define AT91C_PMC_PCSR (0xFFFFFC18) // (PMC) Peripheral Clock Status Register +#define AT91C_PMC_PCKR (0xFFFFFC40) // (PMC) Programmable Clock Register +// ========== Register definition for CKGR peripheral ========== +#define AT91C_CKGR_PLLBR (0xFFFFFC2C) // (CKGR) PLL B Register +#define AT91C_CKGR_MCFR (0xFFFFFC24) // (CKGR) Main Clock Frequency Register +#define AT91C_CKGR_PLLAR (0xFFFFFC28) // (CKGR) PLL A Register +#define AT91C_CKGR_MOR (0xFFFFFC20) // (CKGR) Main Oscillator Register +// ========== Register definition for PIOD peripheral ========== +#define AT91C_PIOD_PDSR (0xFFFFFA3C) // (PIOD) Pin Data Status Register +#define AT91C_PIOD_CODR (0xFFFFFA34) // (PIOD) Clear Output Data Register +#define AT91C_PIOD_OWER (0xFFFFFAA0) // (PIOD) Output Write Enable Register +#define AT91C_PIOD_MDER (0xFFFFFA50) // (PIOD) Multi-driver Enable Register +#define AT91C_PIOD_IMR (0xFFFFFA48) // (PIOD) Interrupt Mask Register +#define AT91C_PIOD_IER (0xFFFFFA40) // (PIOD) Interrupt Enable Register +#define AT91C_PIOD_ODSR (0xFFFFFA38) // (PIOD) Output Data Status Register +#define AT91C_PIOD_SODR (0xFFFFFA30) // (PIOD) Set Output Data Register +#define AT91C_PIOD_PER (0xFFFFFA00) // (PIOD) PIO Enable Register +#define AT91C_PIOD_OWDR (0xFFFFFAA4) // (PIOD) Output Write Disable Register +#define AT91C_PIOD_PPUER (0xFFFFFA64) // (PIOD) Pull-up Enable Register +#define AT91C_PIOD_MDDR (0xFFFFFA54) // (PIOD) Multi-driver Disable Register +#define AT91C_PIOD_ISR (0xFFFFFA4C) // (PIOD) Interrupt Status Register +#define AT91C_PIOD_IDR (0xFFFFFA44) // (PIOD) Interrupt Disable Register +#define AT91C_PIOD_PDR (0xFFFFFA04) // (PIOD) PIO Disable Register +#define AT91C_PIOD_ODR (0xFFFFFA14) // (PIOD) Output Disable Registerr +#define AT91C_PIOD_OWSR (0xFFFFFAA8) // (PIOD) Output Write Status Register +#define AT91C_PIOD_ABSR (0xFFFFFA78) // (PIOD) AB Select Status Register +#define AT91C_PIOD_ASR (0xFFFFFA70) // (PIOD) Select A Register +#define AT91C_PIOD_PPUSR (0xFFFFFA68) // (PIOD) Pad Pull-up Status Register +#define AT91C_PIOD_PPUDR (0xFFFFFA60) // (PIOD) Pull-up Disable Register +#define AT91C_PIOD_MDSR (0xFFFFFA58) // (PIOD) Multi-driver Status Register +#define AT91C_PIOD_PSR (0xFFFFFA08) // (PIOD) PIO Status Register +#define AT91C_PIOD_OER (0xFFFFFA10) // (PIOD) Output Enable Register +#define AT91C_PIOD_OSR (0xFFFFFA18) // (PIOD) Output Status Register +#define AT91C_PIOD_IFER (0xFFFFFA20) // (PIOD) Input Filter Enable Register +#define AT91C_PIOD_BSR (0xFFFFFA74) // (PIOD) Select B Register +#define AT91C_PIOD_IFDR (0xFFFFFA24) // (PIOD) Input Filter Disable Register +#define AT91C_PIOD_IFSR (0xFFFFFA28) // (PIOD) Input Filter Status Register +// ========== Register definition for PIOC peripheral ========== +#define AT91C_PIOC_IFDR (0xFFFFF824) // (PIOC) Input Filter Disable Register +#define AT91C_PIOC_ODR (0xFFFFF814) // (PIOC) Output Disable Registerr +#define AT91C_PIOC_ABSR (0xFFFFF878) // (PIOC) AB Select Status Register +#define AT91C_PIOC_SODR (0xFFFFF830) // (PIOC) Set Output Data Register +#define AT91C_PIOC_IFSR (0xFFFFF828) // (PIOC) Input Filter Status Register +#define AT91C_PIOC_CODR (0xFFFFF834) // (PIOC) Clear Output Data Register +#define AT91C_PIOC_ODSR (0xFFFFF838) // (PIOC) Output Data Status Register +#define AT91C_PIOC_IER (0xFFFFF840) // (PIOC) Interrupt Enable Register +#define AT91C_PIOC_IMR (0xFFFFF848) // (PIOC) Interrupt Mask Register +#define AT91C_PIOC_OWDR (0xFFFFF8A4) // (PIOC) Output Write Disable Register +#define AT91C_PIOC_MDDR (0xFFFFF854) // (PIOC) Multi-driver Disable Register +#define AT91C_PIOC_PDSR (0xFFFFF83C) // (PIOC) Pin Data Status Register +#define AT91C_PIOC_IDR (0xFFFFF844) // (PIOC) Interrupt Disable Register +#define AT91C_PIOC_ISR (0xFFFFF84C) // (PIOC) Interrupt Status Register +#define AT91C_PIOC_PDR (0xFFFFF804) // (PIOC) PIO Disable Register +#define AT91C_PIOC_OWSR (0xFFFFF8A8) // (PIOC) Output Write Status Register +#define AT91C_PIOC_OWER (0xFFFFF8A0) // (PIOC) Output Write Enable Register +#define AT91C_PIOC_ASR (0xFFFFF870) // (PIOC) Select A Register +#define AT91C_PIOC_PPUSR (0xFFFFF868) // (PIOC) Pad Pull-up Status Register +#define AT91C_PIOC_PPUDR (0xFFFFF860) // (PIOC) Pull-up Disable Register +#define AT91C_PIOC_MDSR (0xFFFFF858) // (PIOC) Multi-driver Status Register +#define AT91C_PIOC_MDER (0xFFFFF850) // (PIOC) Multi-driver Enable Register +#define AT91C_PIOC_IFER (0xFFFFF820) // (PIOC) Input Filter Enable Register +#define AT91C_PIOC_OSR (0xFFFFF818) // (PIOC) Output Status Register +#define AT91C_PIOC_OER (0xFFFFF810) // (PIOC) Output Enable Register +#define AT91C_PIOC_PSR (0xFFFFF808) // (PIOC) PIO Status Register +#define AT91C_PIOC_PER (0xFFFFF800) // (PIOC) PIO Enable Register +#define AT91C_PIOC_BSR (0xFFFFF874) // (PIOC) Select B Register +#define AT91C_PIOC_PPUER (0xFFFFF864) // (PIOC) Pull-up Enable Register +// ========== Register definition for PIOB peripheral ========== +#define AT91C_PIOB_OWSR (0xFFFFF6A8) // (PIOB) Output Write Status Register +#define AT91C_PIOB_PPUSR (0xFFFFF668) // (PIOB) Pad Pull-up Status Register +#define AT91C_PIOB_PPUDR (0xFFFFF660) // (PIOB) Pull-up Disable Register +#define AT91C_PIOB_MDSR (0xFFFFF658) // (PIOB) Multi-driver Status Register +#define AT91C_PIOB_MDER (0xFFFFF650) // (PIOB) Multi-driver Enable Register +#define AT91C_PIOB_IMR (0xFFFFF648) // (PIOB) Interrupt Mask Register +#define AT91C_PIOB_OSR (0xFFFFF618) // (PIOB) Output Status Register +#define AT91C_PIOB_OER (0xFFFFF610) // (PIOB) Output Enable Register +#define AT91C_PIOB_PSR (0xFFFFF608) // (PIOB) PIO Status Register +#define AT91C_PIOB_PER (0xFFFFF600) // (PIOB) PIO Enable Register +#define AT91C_PIOB_BSR (0xFFFFF674) // (PIOB) Select B Register +#define AT91C_PIOB_PPUER (0xFFFFF664) // (PIOB) Pull-up Enable Register +#define AT91C_PIOB_IFDR (0xFFFFF624) // (PIOB) Input Filter Disable Register +#define AT91C_PIOB_ODR (0xFFFFF614) // (PIOB) Output Disable Registerr +#define AT91C_PIOB_ABSR (0xFFFFF678) // (PIOB) AB Select Status Register +#define AT91C_PIOB_ASR (0xFFFFF670) // (PIOB) Select A Register +#define AT91C_PIOB_IFER (0xFFFFF620) // (PIOB) Input Filter Enable Register +#define AT91C_PIOB_IFSR (0xFFFFF628) // (PIOB) Input Filter Status Register +#define AT91C_PIOB_SODR (0xFFFFF630) // (PIOB) Set Output Data Register +#define AT91C_PIOB_ODSR (0xFFFFF638) // (PIOB) Output Data Status Register +#define AT91C_PIOB_CODR (0xFFFFF634) // (PIOB) Clear Output Data Register +#define AT91C_PIOB_PDSR (0xFFFFF63C) // (PIOB) Pin Data Status Register +#define AT91C_PIOB_OWER (0xFFFFF6A0) // (PIOB) Output Write Enable Register +#define AT91C_PIOB_IER (0xFFFFF640) // (PIOB) Interrupt Enable Register +#define AT91C_PIOB_OWDR (0xFFFFF6A4) // (PIOB) Output Write Disable Register +#define AT91C_PIOB_MDDR (0xFFFFF654) // (PIOB) Multi-driver Disable Register +#define AT91C_PIOB_ISR (0xFFFFF64C) // (PIOB) Interrupt Status Register +#define AT91C_PIOB_IDR (0xFFFFF644) // (PIOB) Interrupt Disable Register +#define AT91C_PIOB_PDR (0xFFFFF604) // (PIOB) PIO Disable Register +// ========== Register definition for PIOA peripheral ========== +#define AT91C_PIOA_IMR (0xFFFFF448) // (PIOA) Interrupt Mask Register +#define AT91C_PIOA_IER (0xFFFFF440) // (PIOA) Interrupt Enable Register +#define AT91C_PIOA_OWDR (0xFFFFF4A4) // (PIOA) Output Write Disable Register +#define AT91C_PIOA_ISR (0xFFFFF44C) // (PIOA) Interrupt Status Register +#define AT91C_PIOA_PPUDR (0xFFFFF460) // (PIOA) Pull-up Disable Register +#define AT91C_PIOA_MDSR (0xFFFFF458) // (PIOA) Multi-driver Status Register +#define AT91C_PIOA_MDER (0xFFFFF450) // (PIOA) Multi-driver Enable Register +#define AT91C_PIOA_PER (0xFFFFF400) // (PIOA) PIO Enable Register +#define AT91C_PIOA_PSR (0xFFFFF408) // (PIOA) PIO Status Register +#define AT91C_PIOA_OER (0xFFFFF410) // (PIOA) Output Enable Register +#define AT91C_PIOA_BSR (0xFFFFF474) // (PIOA) Select B Register +#define AT91C_PIOA_PPUER (0xFFFFF464) // (PIOA) Pull-up Enable Register +#define AT91C_PIOA_MDDR (0xFFFFF454) // (PIOA) Multi-driver Disable Register +#define AT91C_PIOA_PDR (0xFFFFF404) // (PIOA) PIO Disable Register +#define AT91C_PIOA_ODR (0xFFFFF414) // (PIOA) Output Disable Registerr +#define AT91C_PIOA_IFDR (0xFFFFF424) // (PIOA) Input Filter Disable Register +#define AT91C_PIOA_ABSR (0xFFFFF478) // (PIOA) AB Select Status Register +#define AT91C_PIOA_ASR (0xFFFFF470) // (PIOA) Select A Register +#define AT91C_PIOA_PPUSR (0xFFFFF468) // (PIOA) Pad Pull-up Status Register +#define AT91C_PIOA_ODSR (0xFFFFF438) // (PIOA) Output Data Status Register +#define AT91C_PIOA_SODR (0xFFFFF430) // (PIOA) Set Output Data Register +#define AT91C_PIOA_IFSR (0xFFFFF428) // (PIOA) Input Filter Status Register +#define AT91C_PIOA_IFER (0xFFFFF420) // (PIOA) Input Filter Enable Register +#define AT91C_PIOA_OSR (0xFFFFF418) // (PIOA) Output Status Register +#define AT91C_PIOA_IDR (0xFFFFF444) // (PIOA) Interrupt Disable Register +#define AT91C_PIOA_PDSR (0xFFFFF43C) // (PIOA) Pin Data Status Register +#define AT91C_PIOA_CODR (0xFFFFF434) // (PIOA) Clear Output Data Register +#define AT91C_PIOA_OWSR (0xFFFFF4A8) // (PIOA) Output Write Status Register +#define AT91C_PIOA_OWER (0xFFFFF4A0) // (PIOA) Output Write Enable Register +// ========== Register definition for DBGU peripheral ========== +#define AT91C_DBGU_C2R (0xFFFFF244) // (DBGU) Chip ID2 Register +#define AT91C_DBGU_THR (0xFFFFF21C) // (DBGU) Transmitter Holding Register +#define AT91C_DBGU_CSR (0xFFFFF214) // (DBGU) Channel Status Register +#define AT91C_DBGU_IDR (0xFFFFF20C) // (DBGU) Interrupt Disable Register +#define AT91C_DBGU_MR (0xFFFFF204) // (DBGU) Mode Register +#define AT91C_DBGU_FNTR (0xFFFFF248) // (DBGU) Force NTRST Register +#define AT91C_DBGU_C1R (0xFFFFF240) // (DBGU) Chip ID1 Register +#define AT91C_DBGU_BRGR (0xFFFFF220) // (DBGU) Baud Rate Generator Register +#define AT91C_DBGU_RHR (0xFFFFF218) // (DBGU) Receiver Holding Register +#define AT91C_DBGU_IMR (0xFFFFF210) // (DBGU) Interrupt Mask Register +#define AT91C_DBGU_IER (0xFFFFF208) // (DBGU) Interrupt Enable Register +#define AT91C_DBGU_CR (0xFFFFF200) // (DBGU) Control Register +// ========== Register definition for PDC_DBGU peripheral ========== +#define AT91C_DBGU_TNCR (0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register +#define AT91C_DBGU_RNCR (0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register +#define AT91C_DBGU_PTCR (0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register +#define AT91C_DBGU_PTSR (0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register +#define AT91C_DBGU_RCR (0xFFFFF304) // (PDC_DBGU) Receive Counter Register +#define AT91C_DBGU_TCR (0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register +#define AT91C_DBGU_RPR (0xFFFFF300) // (PDC_DBGU) Receive Pointer Register +#define AT91C_DBGU_TPR (0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register +#define AT91C_DBGU_RNPR (0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register +#define AT91C_DBGU_TNPR (0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register +// ========== Register definition for AIC peripheral ========== +#define AT91C_AIC_ICCR (0xFFFFF128) // (AIC) Interrupt Clear Command Register +#define AT91C_AIC_IECR (0xFFFFF120) // (AIC) Interrupt Enable Command Register +#define AT91C_AIC_SMR (0xFFFFF000) // (AIC) Source Mode Register +#define AT91C_AIC_ISCR (0xFFFFF12C) // (AIC) Interrupt Set Command Register +#define AT91C_AIC_EOICR (0xFFFFF130) // (AIC) End of Interrupt Command Register +#define AT91C_AIC_DCR (0xFFFFF138) // (AIC) Debug Control Register (Protect) +#define AT91C_AIC_FFER (0xFFFFF140) // (AIC) Fast Forcing Enable Register +#define AT91C_AIC_SVR (0xFFFFF080) // (AIC) Source Vector Register +#define AT91C_AIC_SPU (0xFFFFF134) // (AIC) Spurious Vector Register +#define AT91C_AIC_FFDR (0xFFFFF144) // (AIC) Fast Forcing Disable Register +#define AT91C_AIC_FVR (0xFFFFF104) // (AIC) FIQ Vector Register +#define AT91C_AIC_FFSR (0xFFFFF148) // (AIC) Fast Forcing Status Register +#define AT91C_AIC_IMR (0xFFFFF110) // (AIC) Interrupt Mask Register +#define AT91C_AIC_ISR (0xFFFFF108) // (AIC) Interrupt Status Register +#define AT91C_AIC_IVR (0xFFFFF100) // (AIC) IRQ Vector Register +#define AT91C_AIC_IDCR (0xFFFFF124) // (AIC) Interrupt Disable Command Register +#define AT91C_AIC_CISR (0xFFFFF114) // (AIC) Core Interrupt Status Register +#define AT91C_AIC_IPR (0xFFFFF10C) // (AIC) Interrupt Pending Register +// ========== Register definition for PDC_SPI peripheral ========== +#define AT91C_SPI_PTCR (0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register +#define AT91C_SPI_TNPR (0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register +#define AT91C_SPI_RNPR (0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register +#define AT91C_SPI_TPR (0xFFFE0108) // (PDC_SPI) Transmit Pointer Register +#define AT91C_SPI_RPR (0xFFFE0100) // (PDC_SPI) Receive Pointer Register +#define AT91C_SPI_PTSR (0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register +#define AT91C_SPI_TNCR (0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register +#define AT91C_SPI_RNCR (0xFFFE0114) // (PDC_SPI) Receive Next Counter Register +#define AT91C_SPI_TCR (0xFFFE010C) // (PDC_SPI) Transmit Counter Register +#define AT91C_SPI_RCR (0xFFFE0104) // (PDC_SPI) Receive Counter Register +// ========== Register definition for SPI peripheral ========== +#define AT91C_SPI_CSR (0xFFFE0030) // (SPI) Chip Select Register +#define AT91C_SPI_IDR (0xFFFE0018) // (SPI) Interrupt Disable Register +#define AT91C_SPI_SR (0xFFFE0010) // (SPI) Status Register +#define AT91C_SPI_RDR (0xFFFE0008) // (SPI) Receive Data Register +#define AT91C_SPI_CR (0xFFFE0000) // (SPI) Control Register +#define AT91C_SPI_IMR (0xFFFE001C) // (SPI) Interrupt Mask Register +#define AT91C_SPI_IER (0xFFFE0014) // (SPI) Interrupt Enable Register +#define AT91C_SPI_TDR (0xFFFE000C) // (SPI) Transmit Data Register +#define AT91C_SPI_MR (0xFFFE0004) // (SPI) Mode Register +// ========== Register definition for PDC_SSC2 peripheral ========== +#define AT91C_SSC2_PTCR (0xFFFD8120) // (PDC_SSC2) PDC Transfer Control Register +#define AT91C_SSC2_TNPR (0xFFFD8118) // (PDC_SSC2) Transmit Next Pointer Register +#define AT91C_SSC2_RNPR (0xFFFD8110) // (PDC_SSC2) Receive Next Pointer Register +#define AT91C_SSC2_TPR (0xFFFD8108) // (PDC_SSC2) Transmit Pointer Register +#define AT91C_SSC2_RPR (0xFFFD8100) // (PDC_SSC2) Receive Pointer Register +#define AT91C_SSC2_PTSR (0xFFFD8124) // (PDC_SSC2) PDC Transfer Status Register +#define AT91C_SSC2_TNCR (0xFFFD811C) // (PDC_SSC2) Transmit Next Counter Register +#define AT91C_SSC2_RNCR (0xFFFD8114) // (PDC_SSC2) Receive Next Counter Register +#define AT91C_SSC2_TCR (0xFFFD810C) // (PDC_SSC2) Transmit Counter Register +#define AT91C_SSC2_RCR (0xFFFD8104) // (PDC_SSC2) Receive Counter Register +// ========== Register definition for SSC2 peripheral ========== +#define AT91C_SSC2_IMR (0xFFFD804C) // (SSC2) Interrupt Mask Register +#define AT91C_SSC2_IER (0xFFFD8044) // (SSC2) Interrupt Enable Register +#define AT91C_SSC2_RC1R (0xFFFD803C) // (SSC2) Receive Compare 1 Register +#define AT91C_SSC2_TSHR (0xFFFD8034) // (SSC2) Transmit Sync Holding Register +#define AT91C_SSC2_CMR (0xFFFD8004) // (SSC2) Clock Mode Register +#define AT91C_SSC2_IDR (0xFFFD8048) // (SSC2) Interrupt Disable Register +#define AT91C_SSC2_TCMR (0xFFFD8018) // (SSC2) Transmit Clock Mode Register +#define AT91C_SSC2_RCMR (0xFFFD8010) // (SSC2) Receive Clock ModeRegister +#define AT91C_SSC2_CR (0xFFFD8000) // (SSC2) Control Register +#define AT91C_SSC2_RFMR (0xFFFD8014) // (SSC2) Receive Frame Mode Register +#define AT91C_SSC2_TFMR (0xFFFD801C) // (SSC2) Transmit Frame Mode Register +#define AT91C_SSC2_THR (0xFFFD8024) // (SSC2) Transmit Holding Register +#define AT91C_SSC2_SR (0xFFFD8040) // (SSC2) Status Register +#define AT91C_SSC2_RC0R (0xFFFD8038) // (SSC2) Receive Compare 0 Register +#define AT91C_SSC2_RSHR (0xFFFD8030) // (SSC2) Receive Sync Holding Register +#define AT91C_SSC2_RHR (0xFFFD8020) // (SSC2) Receive Holding Register +// ========== Register definition for PDC_SSC1 peripheral ========== +#define AT91C_SSC1_PTCR (0xFFFD4120) // (PDC_SSC1) PDC Transfer Control Register +#define AT91C_SSC1_TNPR (0xFFFD4118) // (PDC_SSC1) Transmit Next Pointer Register +#define AT91C_SSC1_RNPR (0xFFFD4110) // (PDC_SSC1) Receive Next Pointer Register +#define AT91C_SSC1_TPR (0xFFFD4108) // (PDC_SSC1) Transmit Pointer Register +#define AT91C_SSC1_RPR (0xFFFD4100) // (PDC_SSC1) Receive Pointer Register +#define AT91C_SSC1_PTSR (0xFFFD4124) // (PDC_SSC1) PDC Transfer Status Register +#define AT91C_SSC1_TNCR (0xFFFD411C) // (PDC_SSC1) Transmit Next Counter Register +#define AT91C_SSC1_RNCR (0xFFFD4114) // (PDC_SSC1) Receive Next Counter Register +#define AT91C_SSC1_TCR (0xFFFD410C) // (PDC_SSC1) Transmit Counter Register +#define AT91C_SSC1_RCR (0xFFFD4104) // (PDC_SSC1) Receive Counter Register +// ========== Register definition for SSC1 peripheral ========== +#define AT91C_SSC1_RFMR (0xFFFD4014) // (SSC1) Receive Frame Mode Register +#define AT91C_SSC1_CMR (0xFFFD4004) // (SSC1) Clock Mode Register +#define AT91C_SSC1_IDR (0xFFFD4048) // (SSC1) Interrupt Disable Register +#define AT91C_SSC1_SR (0xFFFD4040) // (SSC1) Status Register +#define AT91C_SSC1_RC0R (0xFFFD4038) // (SSC1) Receive Compare 0 Register +#define AT91C_SSC1_RSHR (0xFFFD4030) // (SSC1) Receive Sync Holding Register +#define AT91C_SSC1_RHR (0xFFFD4020) // (SSC1) Receive Holding Register +#define AT91C_SSC1_TCMR (0xFFFD4018) // (SSC1) Transmit Clock Mode Register +#define AT91C_SSC1_RCMR (0xFFFD4010) // (SSC1) Receive Clock ModeRegister +#define AT91C_SSC1_CR (0xFFFD4000) // (SSC1) Control Register +#define AT91C_SSC1_IMR (0xFFFD404C) // (SSC1) Interrupt Mask Register +#define AT91C_SSC1_IER (0xFFFD4044) // (SSC1) Interrupt Enable Register +#define AT91C_SSC1_RC1R (0xFFFD403C) // (SSC1) Receive Compare 1 Register +#define AT91C_SSC1_TSHR (0xFFFD4034) // (SSC1) Transmit Sync Holding Register +#define AT91C_SSC1_THR (0xFFFD4024) // (SSC1) Transmit Holding Register +#define AT91C_SSC1_TFMR (0xFFFD401C) // (SSC1) Transmit Frame Mode Register +// ========== Register definition for PDC_SSC0 peripheral ========== +#define AT91C_SSC0_PTCR (0xFFFD0120) // (PDC_SSC0) PDC Transfer Control Register +#define AT91C_SSC0_TNPR (0xFFFD0118) // (PDC_SSC0) Transmit Next Pointer Register +#define AT91C_SSC0_RNPR (0xFFFD0110) // (PDC_SSC0) Receive Next Pointer Register +#define AT91C_SSC0_TPR (0xFFFD0108) // (PDC_SSC0) Transmit Pointer Register +#define AT91C_SSC0_RPR (0xFFFD0100) // (PDC_SSC0) Receive Pointer Register +#define AT91C_SSC0_PTSR (0xFFFD0124) // (PDC_SSC0) PDC Transfer Status Register +#define AT91C_SSC0_TNCR (0xFFFD011C) // (PDC_SSC0) Transmit Next Counter Register +#define AT91C_SSC0_RNCR (0xFFFD0114) // (PDC_SSC0) Receive Next Counter Register +#define AT91C_SSC0_TCR (0xFFFD010C) // (PDC_SSC0) Transmit Counter Register +#define AT91C_SSC0_RCR (0xFFFD0104) // (PDC_SSC0) Receive Counter Register +// ========== Register definition for SSC0 peripheral ========== +#define AT91C_SSC0_IMR (0xFFFD004C) // (SSC0) Interrupt Mask Register +#define AT91C_SSC0_IER (0xFFFD0044) // (SSC0) Interrupt Enable Register +#define AT91C_SSC0_RC1R (0xFFFD003C) // (SSC0) Receive Compare 1 Register +#define AT91C_SSC0_TSHR (0xFFFD0034) // (SSC0) Transmit Sync Holding Register +#define AT91C_SSC0_THR (0xFFFD0024) // (SSC0) Transmit Holding Register +#define AT91C_SSC0_TFMR (0xFFFD001C) // (SSC0) Transmit Frame Mode Register +#define AT91C_SSC0_RFMR (0xFFFD0014) // (SSC0) Receive Frame Mode Register +#define AT91C_SSC0_CMR (0xFFFD0004) // (SSC0) Clock Mode Register +#define AT91C_SSC0_IDR (0xFFFD0048) // (SSC0) Interrupt Disable Register +#define AT91C_SSC0_SR (0xFFFD0040) // (SSC0) Status Register +#define AT91C_SSC0_RC0R (0xFFFD0038) // (SSC0) Receive Compare 0 Register +#define AT91C_SSC0_RSHR (0xFFFD0030) // (SSC0) Receive Sync Holding Register +#define AT91C_SSC0_RHR (0xFFFD0020) // (SSC0) Receive Holding Register +#define AT91C_SSC0_TCMR (0xFFFD0018) // (SSC0) Transmit Clock Mode Register +#define AT91C_SSC0_RCMR (0xFFFD0010) // (SSC0) Receive Clock ModeRegister +#define AT91C_SSC0_CR (0xFFFD0000) // (SSC0) Control Register +// ========== Register definition for PDC_US3 peripheral ========== +#define AT91C_US3_PTSR (0xFFFCC124) // (PDC_US3) PDC Transfer Status Register +#define AT91C_US3_TNCR (0xFFFCC11C) // (PDC_US3) Transmit Next Counter Register +#define AT91C_US3_RNCR (0xFFFCC114) // (PDC_US3) Receive Next Counter Register +#define AT91C_US3_TCR (0xFFFCC10C) // (PDC_US3) Transmit Counter Register +#define AT91C_US3_RCR (0xFFFCC104) // (PDC_US3) Receive Counter Register +#define AT91C_US3_PTCR (0xFFFCC120) // (PDC_US3) PDC Transfer Control Register +#define AT91C_US3_TNPR (0xFFFCC118) // (PDC_US3) Transmit Next Pointer Register +#define AT91C_US3_RNPR (0xFFFCC110) // (PDC_US3) Receive Next Pointer Register +#define AT91C_US3_TPR (0xFFFCC108) // (PDC_US3) Transmit Pointer Register +#define AT91C_US3_RPR (0xFFFCC100) // (PDC_US3) Receive Pointer Register +// ========== Register definition for US3 peripheral ========== +#define AT91C_US3_IF (0xFFFCC04C) // (US3) IRDA_FILTER Register +#define AT91C_US3_NER (0xFFFCC044) // (US3) Nb Errors Register +#define AT91C_US3_RTOR (0xFFFCC024) // (US3) Receiver Time-out Register +#define AT91C_US3_THR (0xFFFCC01C) // (US3) Transmitter Holding Register +#define AT91C_US3_CSR (0xFFFCC014) // (US3) Channel Status Register +#define AT91C_US3_IDR (0xFFFCC00C) // (US3) Interrupt Disable Register +#define AT91C_US3_MR (0xFFFCC004) // (US3) Mode Register +#define AT91C_US3_XXR (0xFFFCC048) // (US3) XON_XOFF Register +#define AT91C_US3_FIDI (0xFFFCC040) // (US3) FI_DI_Ratio Register +#define AT91C_US3_TTGR (0xFFFCC028) // (US3) Transmitter Time-guard Register +#define AT91C_US3_BRGR (0xFFFCC020) // (US3) Baud Rate Generator Register +#define AT91C_US3_RHR (0xFFFCC018) // (US3) Receiver Holding Register +#define AT91C_US3_IMR (0xFFFCC010) // (US3) Interrupt Mask Register +#define AT91C_US3_IER (0xFFFCC008) // (US3) Interrupt Enable Register +#define AT91C_US3_CR (0xFFFCC000) // (US3) Control Register +// ========== Register definition for PDC_US2 peripheral ========== +#define AT91C_US2_PTSR (0xFFFC8124) // (PDC_US2) PDC Transfer Status Register +#define AT91C_US2_TNCR (0xFFFC811C) // (PDC_US2) Transmit Next Counter Register +#define AT91C_US2_RNCR (0xFFFC8114) // (PDC_US2) Receive Next Counter Register +#define AT91C_US2_TCR (0xFFFC810C) // (PDC_US2) Transmit Counter Register +#define AT91C_US2_PTCR (0xFFFC8120) // (PDC_US2) PDC Transfer Control Register +#define AT91C_US2_RCR (0xFFFC8104) // (PDC_US2) Receive Counter Register +#define AT91C_US2_TNPR (0xFFFC8118) // (PDC_US2) Transmit Next Pointer Register +#define AT91C_US2_RPR (0xFFFC8100) // (PDC_US2) Receive Pointer Register +#define AT91C_US2_TPR (0xFFFC8108) // (PDC_US2) Transmit Pointer Register +#define AT91C_US2_RNPR (0xFFFC8110) // (PDC_US2) Receive Next Pointer Register +// ========== Register definition for US2 peripheral ========== +#define AT91C_US2_XXR (0xFFFC8048) // (US2) XON_XOFF Register +#define AT91C_US2_FIDI (0xFFFC8040) // (US2) FI_DI_Ratio Register +#define AT91C_US2_TTGR (0xFFFC8028) // (US2) Transmitter Time-guard Register +#define AT91C_US2_BRGR (0xFFFC8020) // (US2) Baud Rate Generator Register +#define AT91C_US2_RHR (0xFFFC8018) // (US2) Receiver Holding Register +#define AT91C_US2_IMR (0xFFFC8010) // (US2) Interrupt Mask Register +#define AT91C_US2_IER (0xFFFC8008) // (US2) Interrupt Enable Register +#define AT91C_US2_CR (0xFFFC8000) // (US2) Control Register +#define AT91C_US2_IF (0xFFFC804C) // (US2) IRDA_FILTER Register +#define AT91C_US2_NER (0xFFFC8044) // (US2) Nb Errors Register +#define AT91C_US2_RTOR (0xFFFC8024) // (US2) Receiver Time-out Register +#define AT91C_US2_THR (0xFFFC801C) // (US2) Transmitter Holding Register +#define AT91C_US2_CSR (0xFFFC8014) // (US2) Channel Status Register +#define AT91C_US2_IDR (0xFFFC800C) // (US2) Interrupt Disable Register +#define AT91C_US2_MR (0xFFFC8004) // (US2) Mode Register +// ========== Register definition for PDC_US1 peripheral ========== +#define AT91C_US1_PTSR (0xFFFC4124) // (PDC_US1) PDC Transfer Status Register +#define AT91C_US1_TNCR (0xFFFC411C) // (PDC_US1) Transmit Next Counter Register +#define AT91C_US1_RNCR (0xFFFC4114) // (PDC_US1) Receive Next Counter Register +#define AT91C_US1_TCR (0xFFFC410C) // (PDC_US1) Transmit Counter Register +#define AT91C_US1_RCR (0xFFFC4104) // (PDC_US1) Receive Counter Register +#define AT91C_US1_PTCR (0xFFFC4120) // (PDC_US1) PDC Transfer Control Register +#define AT91C_US1_TNPR (0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register +#define AT91C_US1_RNPR (0xFFFC4110) // (PDC_US1) Receive Next Pointer Register +#define AT91C_US1_TPR (0xFFFC4108) // (PDC_US1) Transmit Pointer Register +#define AT91C_US1_RPR (0xFFFC4100) // (PDC_US1) Receive Pointer Register +// ========== Register definition for US1 peripheral ========== +#define AT91C_US1_XXR (0xFFFC4048) // (US1) XON_XOFF Register +#define AT91C_US1_RHR (0xFFFC4018) // (US1) Receiver Holding Register +#define AT91C_US1_IMR (0xFFFC4010) // (US1) Interrupt Mask Register +#define AT91C_US1_IER (0xFFFC4008) // (US1) Interrupt Enable Register +#define AT91C_US1_CR (0xFFFC4000) // (US1) Control Register +#define AT91C_US1_RTOR (0xFFFC4024) // (US1) Receiver Time-out Register +#define AT91C_US1_THR (0xFFFC401C) // (US1) Transmitter Holding Register +#define AT91C_US1_CSR (0xFFFC4014) // (US1) Channel Status Register +#define AT91C_US1_IDR (0xFFFC400C) // (US1) Interrupt Disable Register +#define AT91C_US1_FIDI (0xFFFC4040) // (US1) FI_DI_Ratio Register +#define AT91C_US1_BRGR (0xFFFC4020) // (US1) Baud Rate Generator Register +#define AT91C_US1_TTGR (0xFFFC4028) // (US1) Transmitter Time-guard Register +#define AT91C_US1_IF (0xFFFC404C) // (US1) IRDA_FILTER Register +#define AT91C_US1_NER (0xFFFC4044) // (US1) Nb Errors Register +#define AT91C_US1_MR (0xFFFC4004) // (US1) Mode Register +// ========== Register definition for PDC_US0 peripheral ========== +#define AT91C_US0_PTCR (0xFFFC0120) // (PDC_US0) PDC Transfer Control Register +#define AT91C_US0_TNPR (0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register +#define AT91C_US0_RNPR (0xFFFC0110) // (PDC_US0) Receive Next Pointer Register +#define AT91C_US0_TPR (0xFFFC0108) // (PDC_US0) Transmit Pointer Register +#define AT91C_US0_RPR (0xFFFC0100) // (PDC_US0) Receive Pointer Register +#define AT91C_US0_PTSR (0xFFFC0124) // (PDC_US0) PDC Transfer Status Register +#define AT91C_US0_TNCR (0xFFFC011C) // (PDC_US0) Transmit Next Counter Register +#define AT91C_US0_RNCR (0xFFFC0114) // (PDC_US0) Receive Next Counter Register +#define AT91C_US0_TCR (0xFFFC010C) // (PDC_US0) Transmit Counter Register +#define AT91C_US0_RCR (0xFFFC0104) // (PDC_US0) Receive Counter Register +// ========== Register definition for US0 peripheral ========== +#define AT91C_US0_TTGR (0xFFFC0028) // (US0) Transmitter Time-guard Register +#define AT91C_US0_BRGR (0xFFFC0020) // (US0) Baud Rate Generator Register +#define AT91C_US0_RHR (0xFFFC0018) // (US0) Receiver Holding Register +#define AT91C_US0_IMR (0xFFFC0010) // (US0) Interrupt Mask Register +#define AT91C_US0_NER (0xFFFC0044) // (US0) Nb Errors Register +#define AT91C_US0_RTOR (0xFFFC0024) // (US0) Receiver Time-out Register +#define AT91C_US0_XXR (0xFFFC0048) // (US0) XON_XOFF Register +#define AT91C_US0_FIDI (0xFFFC0040) // (US0) FI_DI_Ratio Register +#define AT91C_US0_CR (0xFFFC0000) // (US0) Control Register +#define AT91C_US0_IER (0xFFFC0008) // (US0) Interrupt Enable Register +#define AT91C_US0_IF (0xFFFC004C) // (US0) IRDA_FILTER Register +#define AT91C_US0_MR (0xFFFC0004) // (US0) Mode Register +#define AT91C_US0_IDR (0xFFFC000C) // (US0) Interrupt Disable Register +#define AT91C_US0_CSR (0xFFFC0014) // (US0) Channel Status Register +#define AT91C_US0_THR (0xFFFC001C) // (US0) Transmitter Holding Register +// ========== Register definition for TWI peripheral ========== +#define AT91C_TWI_RHR (0xFFFB8030) // (TWI) Receive Holding Register +#define AT91C_TWI_IDR (0xFFFB8028) // (TWI) Interrupt Disable Register +#define AT91C_TWI_SR (0xFFFB8020) // (TWI) Status Register +#define AT91C_TWI_CWGR (0xFFFB8010) // (TWI) Clock Waveform Generator Register +#define AT91C_TWI_SMR (0xFFFB8008) // (TWI) Slave Mode Register +#define AT91C_TWI_CR (0xFFFB8000) // (TWI) Control Register +#define AT91C_TWI_THR (0xFFFB8034) // (TWI) Transmit Holding Register +#define AT91C_TWI_IMR (0xFFFB802C) // (TWI) Interrupt Mask Register +#define AT91C_TWI_IER (0xFFFB8024) // (TWI) Interrupt Enable Register +#define AT91C_TWI_IADR (0xFFFB800C) // (TWI) Internal Address Register +#define AT91C_TWI_MMR (0xFFFB8004) // (TWI) Master Mode Register +// ========== Register definition for PDC_MCI peripheral ========== +#define AT91C_MCI_PTCR (0xFFFB4120) // (PDC_MCI) PDC Transfer Control Register +#define AT91C_MCI_TNPR (0xFFFB4118) // (PDC_MCI) Transmit Next Pointer Register +#define AT91C_MCI_RNPR (0xFFFB4110) // (PDC_MCI) Receive Next Pointer Register +#define AT91C_MCI_TPR (0xFFFB4108) // (PDC_MCI) Transmit Pointer Register +#define AT91C_MCI_RPR (0xFFFB4100) // (PDC_MCI) Receive Pointer Register +#define AT91C_MCI_PTSR (0xFFFB4124) // (PDC_MCI) PDC Transfer Status Register +#define AT91C_MCI_TNCR (0xFFFB411C) // (PDC_MCI) Transmit Next Counter Register +#define AT91C_MCI_RNCR (0xFFFB4114) // (PDC_MCI) Receive Next Counter Register +#define AT91C_MCI_TCR (0xFFFB410C) // (PDC_MCI) Transmit Counter Register +#define AT91C_MCI_RCR (0xFFFB4104) // (PDC_MCI) Receive Counter Register +// ========== Register definition for MCI peripheral ========== +#define AT91C_MCI_IDR (0xFFFB4048) // (MCI) MCI Interrupt Disable Register +#define AT91C_MCI_SR (0xFFFB4040) // (MCI) MCI Status Register +#define AT91C_MCI_RDR (0xFFFB4030) // (MCI) MCI Receive Data Register +#define AT91C_MCI_RSPR (0xFFFB4020) // (MCI) MCI Response Register +#define AT91C_MCI_ARGR (0xFFFB4010) // (MCI) MCI Argument Register +#define AT91C_MCI_DTOR (0xFFFB4008) // (MCI) MCI Data Timeout Register +#define AT91C_MCI_CR (0xFFFB4000) // (MCI) MCI Control Register +#define AT91C_MCI_IMR (0xFFFB404C) // (MCI) MCI Interrupt Mask Register +#define AT91C_MCI_IER (0xFFFB4044) // (MCI) MCI Interrupt Enable Register +#define AT91C_MCI_TDR (0xFFFB4034) // (MCI) MCI Transmit Data Register +#define AT91C_MCI_CMDR (0xFFFB4014) // (MCI) MCI Command Register +#define AT91C_MCI_SDCR (0xFFFB400C) // (MCI) MCI SD Card Register +#define AT91C_MCI_MR (0xFFFB4004) // (MCI) MCI Mode Register +// ========== Register definition for UDP peripheral ========== +#define AT91C_UDP_ISR (0xFFFB001C) // (UDP) Interrupt Status Register +#define AT91C_UDP_IDR (0xFFFB0014) // (UDP) Interrupt Disable Register +#define AT91C_UDP_GLBSTATE (0xFFFB0004) // (UDP) Global State Register +#define AT91C_UDP_FDR (0xFFFB0050) // (UDP) Endpoint FIFO Data Register +#define AT91C_UDP_CSR (0xFFFB0030) // (UDP) Endpoint Control and Status Register +#define AT91C_UDP_RSTEP (0xFFFB0028) // (UDP) Reset Endpoint Register +#define AT91C_UDP_ICR (0xFFFB0020) // (UDP) Interrupt Clear Register +#define AT91C_UDP_IMR (0xFFFB0018) // (UDP) Interrupt Mask Register +#define AT91C_UDP_IER (0xFFFB0010) // (UDP) Interrupt Enable Register +#define AT91C_UDP_FADDR (0xFFFB0008) // (UDP) Function Address Register +#define AT91C_UDP_NUM (0xFFFB0000) // (UDP) Frame Number Register +// ========== Register definition for TC5 peripheral ========== +#define AT91C_TC5_CMR (0xFFFA4084) // (TC5) Channel Mode Register +#define AT91C_TC5_IDR (0xFFFA40A8) // (TC5) Interrupt Disable Register +#define AT91C_TC5_SR (0xFFFA40A0) // (TC5) Status Register +#define AT91C_TC5_RB (0xFFFA4098) // (TC5) Register B +#define AT91C_TC5_CV (0xFFFA4090) // (TC5) Counter Value +#define AT91C_TC5_CCR (0xFFFA4080) // (TC5) Channel Control Register +#define AT91C_TC5_IMR (0xFFFA40AC) // (TC5) Interrupt Mask Register +#define AT91C_TC5_IER (0xFFFA40A4) // (TC5) Interrupt Enable Register +#define AT91C_TC5_RC (0xFFFA409C) // (TC5) Register C +#define AT91C_TC5_RA (0xFFFA4094) // (TC5) Register A +// ========== Register definition for TC4 peripheral ========== +#define AT91C_TC4_IMR (0xFFFA406C) // (TC4) Interrupt Mask Register +#define AT91C_TC4_IER (0xFFFA4064) // (TC4) Interrupt Enable Register +#define AT91C_TC4_RC (0xFFFA405C) // (TC4) Register C +#define AT91C_TC4_RA (0xFFFA4054) // (TC4) Register A +#define AT91C_TC4_CMR (0xFFFA4044) // (TC4) Channel Mode Register +#define AT91C_TC4_IDR (0xFFFA4068) // (TC4) Interrupt Disable Register +#define AT91C_TC4_SR (0xFFFA4060) // (TC4) Status Register +#define AT91C_TC4_RB (0xFFFA4058) // (TC4) Register B +#define AT91C_TC4_CV (0xFFFA4050) // (TC4) Counter Value +#define AT91C_TC4_CCR (0xFFFA4040) // (TC4) Channel Control Register +// ========== Register definition for TC3 peripheral ========== +#define AT91C_TC3_IMR (0xFFFA402C) // (TC3) Interrupt Mask Register +#define AT91C_TC3_CV (0xFFFA4010) // (TC3) Counter Value +#define AT91C_TC3_CCR (0xFFFA4000) // (TC3) Channel Control Register +#define AT91C_TC3_IER (0xFFFA4024) // (TC3) Interrupt Enable Register +#define AT91C_TC3_CMR (0xFFFA4004) // (TC3) Channel Mode Register +#define AT91C_TC3_RA (0xFFFA4014) // (TC3) Register A +#define AT91C_TC3_RC (0xFFFA401C) // (TC3) Register C +#define AT91C_TC3_IDR (0xFFFA4028) // (TC3) Interrupt Disable Register +#define AT91C_TC3_RB (0xFFFA4018) // (TC3) Register B +#define AT91C_TC3_SR (0xFFFA4020) // (TC3) Status Register +// ========== Register definition for TCB1 peripheral ========== +#define AT91C_TCB1_BCR (0xFFFA4140) // (TCB1) TC Block Control Register +#define AT91C_TCB1_BMR (0xFFFA4144) // (TCB1) TC Block Mode Register +// ========== Register definition for TC2 peripheral ========== +#define AT91C_TC2_IMR (0xFFFA00AC) // (TC2) Interrupt Mask Register +#define AT91C_TC2_IER (0xFFFA00A4) // (TC2) Interrupt Enable Register +#define AT91C_TC2_RC (0xFFFA009C) // (TC2) Register C +#define AT91C_TC2_RA (0xFFFA0094) // (TC2) Register A +#define AT91C_TC2_CMR (0xFFFA0084) // (TC2) Channel Mode Register +#define AT91C_TC2_IDR (0xFFFA00A8) // (TC2) Interrupt Disable Register +#define AT91C_TC2_SR (0xFFFA00A0) // (TC2) Status Register +#define AT91C_TC2_RB (0xFFFA0098) // (TC2) Register B +#define AT91C_TC2_CV (0xFFFA0090) // (TC2) Counter Value +#define AT91C_TC2_CCR (0xFFFA0080) // (TC2) Channel Control Register +// ========== Register definition for TC1 peripheral ========== +#define AT91C_TC1_IMR (0xFFFA006C) // (TC1) Interrupt Mask Register +#define AT91C_TC1_IER (0xFFFA0064) // (TC1) Interrupt Enable Register +#define AT91C_TC1_RC (0xFFFA005C) // (TC1) Register C +#define AT91C_TC1_RA (0xFFFA0054) // (TC1) Register A +#define AT91C_TC1_CMR (0xFFFA0044) // (TC1) Channel Mode Register +#define AT91C_TC1_IDR (0xFFFA0068) // (TC1) Interrupt Disable Register +#define AT91C_TC1_SR (0xFFFA0060) // (TC1) Status Register +#define AT91C_TC1_RB (0xFFFA0058) // (TC1) Register B +#define AT91C_TC1_CV (0xFFFA0050) // (TC1) Counter Value +#define AT91C_TC1_CCR (0xFFFA0040) // (TC1) Channel Control Register +// ========== Register definition for TC0 peripheral ========== +#define AT91C_TC0_IMR (0xFFFA002C) // (TC0) Interrupt Mask Register +#define AT91C_TC0_IER (0xFFFA0024) // (TC0) Interrupt Enable Register +#define AT91C_TC0_RC (0xFFFA001C) // (TC0) Register C +#define AT91C_TC0_RA (0xFFFA0014) // (TC0) Register A +#define AT91C_TC0_CMR (0xFFFA0004) // (TC0) Channel Mode Register +#define AT91C_TC0_IDR (0xFFFA0028) // (TC0) Interrupt Disable Register +#define AT91C_TC0_SR (0xFFFA0020) // (TC0) Status Register +#define AT91C_TC0_RB (0xFFFA0018) // (TC0) Register B +#define AT91C_TC0_CV (0xFFFA0010) // (TC0) Counter Value +#define AT91C_TC0_CCR (0xFFFA0000) // (TC0) Channel Control Register +// ========== Register definition for TCB0 peripheral ========== +#define AT91C_TCB0_BMR (0xFFFA00C4) // (TCB0) TC Block Mode Register +#define AT91C_TCB0_BCR (0xFFFA00C0) // (TCB0) TC Block Control Register +// ========== Register definition for UHP peripheral ========== +#define AT91C_UHP_HcRhDescriptorA (0x00300048) // (UHP) Root Hub characteristics A +#define AT91C_UHP_HcRhPortStatus (0x00300054) // (UHP) Root Hub Port Status Register +#define AT91C_UHP_HcRhDescriptorB (0x0030004C) // (UHP) Root Hub characteristics B +#define AT91C_UHP_HcControl (0x00300004) // (UHP) Operating modes for the Host Controller +#define AT91C_UHP_HcInterruptStatus (0x0030000C) // (UHP) Interrupt Status Register +#define AT91C_UHP_HcRhStatus (0x00300050) // (UHP) Root Hub Status register +#define AT91C_UHP_HcRevision (0x00300000) // (UHP) Revision +#define AT91C_UHP_HcCommandStatus (0x00300008) // (UHP) Command & status Register +#define AT91C_UHP_HcInterruptEnable (0x00300010) // (UHP) Interrupt Enable Register +#define AT91C_UHP_HcHCCA (0x00300018) // (UHP) Pointer to the Host Controller Communication Area +#define AT91C_UHP_HcControlHeadED (0x00300020) // (UHP) First Endpoint Descriptor of the Control list +#define AT91C_UHP_HcInterruptDisable (0x00300014) // (UHP) Interrupt Disable Register +#define AT91C_UHP_HcPeriodCurrentED (0x0030001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor +#define AT91C_UHP_HcControlCurrentED (0x00300024) // (UHP) Endpoint Control and Status Register +#define AT91C_UHP_HcBulkCurrentED (0x0030002C) // (UHP) Current endpoint of the Bulk list +#define AT91C_UHP_HcFmInterval (0x00300034) // (UHP) Bit time between 2 consecutive SOFs +#define AT91C_UHP_HcBulkHeadED (0x00300028) // (UHP) First endpoint register of the Bulk list +#define AT91C_UHP_HcBulkDoneHead (0x00300030) // (UHP) Last completed transfer descriptor +#define AT91C_UHP_HcFmRemaining (0x00300038) // (UHP) Bit time remaining in the current Frame +#define AT91C_UHP_HcPeriodicStart (0x00300040) // (UHP) Periodic Start +#define AT91C_UHP_HcLSThreshold (0x00300044) // (UHP) LS Threshold +#define AT91C_UHP_HcFmNumber (0x0030003C) // (UHP) Frame number +// ========== Register definition for EMAC peripheral ========== +#define AT91C_EMAC_RSR (0xFFFBC020) // (EMAC) Receive Status Register +#define AT91C_EMAC_MAN (0xFFFBC034) // (EMAC) PHY Maintenance Register +#define AT91C_EMAC_HSH (0xFFFBC090) // (EMAC) Hash Address High[63:32] +#define AT91C_EMAC_MCOL (0xFFFBC048) // (EMAC) Multiple Collision Frame Register +#define AT91C_EMAC_IER (0xFFFBC028) // (EMAC) Interrupt Enable Register +#define AT91C_EMAC_SA2H (0xFFFBC0A4) // (EMAC) Specific Address 2 High, Last 2 bytes +#define AT91C_EMAC_HSL (0xFFFBC094) // (EMAC) Hash Address Low[31:0] +#define AT91C_EMAC_LCOL (0xFFFBC05C) // (EMAC) Late Collision Register +#define AT91C_EMAC_OK (0xFFFBC04C) // (EMAC) Frames Received OK Register +#define AT91C_EMAC_CFG (0xFFFBC004) // (EMAC) Network Configuration Register +#define AT91C_EMAC_SA3L (0xFFFBC0A8) // (EMAC) Specific Address 3 Low, First 4 bytes +#define AT91C_EMAC_SEQE (0xFFFBC050) // (EMAC) Frame Check Sequence Error Register +#define AT91C_EMAC_ECOL (0xFFFBC060) // (EMAC) Excessive Collision Register +#define AT91C_EMAC_ELR (0xFFFBC070) // (EMAC) Excessive Length Error Register +#define AT91C_EMAC_SR (0xFFFBC008) // (EMAC) Network Status Register +#define AT91C_EMAC_RBQP (0xFFFBC018) // (EMAC) Receive Buffer Queue Pointer +#define AT91C_EMAC_CSE (0xFFFBC064) // (EMAC) Carrier Sense Error Register +#define AT91C_EMAC_RJB (0xFFFBC074) // (EMAC) Receive Jabber Register +#define AT91C_EMAC_USF (0xFFFBC078) // (EMAC) Undersize Frame Register +#define AT91C_EMAC_IDR (0xFFFBC02C) // (EMAC) Interrupt Disable Register +#define AT91C_EMAC_SA1L (0xFFFBC098) // (EMAC) Specific Address 1 Low, First 4 bytes +#define AT91C_EMAC_IMR (0xFFFBC030) // (EMAC) Interrupt Mask Register +#define AT91C_EMAC_FRA (0xFFFBC040) // (EMAC) Frames Transmitted OK Register +#define AT91C_EMAC_SA3H (0xFFFBC0AC) // (EMAC) Specific Address 3 High, Last 2 bytes +#define AT91C_EMAC_SA1H (0xFFFBC09C) // (EMAC) Specific Address 1 High, Last 2 bytes +#define AT91C_EMAC_SCOL (0xFFFBC044) // (EMAC) Single Collision Frame Register +#define AT91C_EMAC_ALE (0xFFFBC054) // (EMAC) Alignment Error Register +#define AT91C_EMAC_TAR (0xFFFBC00C) // (EMAC) Transmit Address Register +#define AT91C_EMAC_SA4L (0xFFFBC0B0) // (EMAC) Specific Address 4 Low, First 4 bytes +#define AT91C_EMAC_SA2L (0xFFFBC0A0) // (EMAC) Specific Address 2 Low, First 4 bytes +#define AT91C_EMAC_TUE (0xFFFBC068) // (EMAC) Transmit Underrun Error Register +#define AT91C_EMAC_DTE (0xFFFBC058) // (EMAC) Deferred Transmission Frame Register +#define AT91C_EMAC_TCR (0xFFFBC010) // (EMAC) Transmit Control Register +#define AT91C_EMAC_CTL (0xFFFBC000) // (EMAC) Network Control Register +#define AT91C_EMAC_SA4H (0xFFFBC0B4) // (EMAC) Specific Address 4 High, Last 2 bytesr +#define AT91C_EMAC_CDE (0xFFFBC06C) // (EMAC) Code Error Register +#define AT91C_EMAC_SQEE (0xFFFBC07C) // (EMAC) SQE Test Error Register +#define AT91C_EMAC_TSR (0xFFFBC014) // (EMAC) Transmit Status Register +#define AT91C_EMAC_DRFC (0xFFFBC080) // (EMAC) Discarded RX Frame Register +// ========== Register definition for EBI peripheral ========== +#define AT91C_EBI_CFGR (0xFFFFFF64) // (EBI) Configuration Register +#define AT91C_EBI_CSA (0xFFFFFF60) // (EBI) Chip Select Assignment Register +// ========== Register definition for SMC2 peripheral ========== +#define AT91C_SMC2_CSR (0xFFFFFF70) // (SMC2) SMC2 Chip Select Register +// ========== Register definition for SDRC peripheral ========== +#define AT91C_SDRC_IMR (0xFFFFFFAC) // (SDRC) SDRAM Controller Interrupt Mask Register +#define AT91C_SDRC_IER (0xFFFFFFA4) // (SDRC) SDRAM Controller Interrupt Enable Register +#define AT91C_SDRC_SRR (0xFFFFFF9C) // (SDRC) SDRAM Controller Self Refresh Register +#define AT91C_SDRC_TR (0xFFFFFF94) // (SDRC) SDRAM Controller Refresh Timer Register +#define AT91C_SDRC_ISR (0xFFFFFFB0) // (SDRC) SDRAM Controller Interrupt Mask Register +#define AT91C_SDRC_IDR (0xFFFFFFA8) // (SDRC) SDRAM Controller Interrupt Disable Register +#define AT91C_SDRC_LPR (0xFFFFFFA0) // (SDRC) SDRAM Controller Low Power Register +#define AT91C_SDRC_CR (0xFFFFFF98) // (SDRC) SDRAM Controller Configuration Register +#define AT91C_SDRC_MR (0xFFFFFF90) // (SDRC) SDRAM Controller Mode Register +// ========== Register definition for BFC peripheral ========== +#define AT91C_BFC_MR (0xFFFFFFC0) // (BFC) BFC Mode Register + +// ***************************************************************************** +// PIO DEFINITIONS FOR AT91RM9200 +// ***************************************************************************** +#define AT91C_PIO_PA0 (1 << 0) // Pin Controlled by PA0 +#define AT91C_PA0_MISO (AT91C_PIO_PA0) // SPI Master In Slave +#define AT91C_PA0_PCK3 (AT91C_PIO_PA0) // PMC Programmable Clock Output 3 +#define AT91C_PIO_PA1 (1 << 1) // Pin Controlled by PA1 +#define AT91C_PA1_MOSI (AT91C_PIO_PA1) // SPI Master Out Slave +#define AT91C_PA1_PCK0 (AT91C_PIO_PA1) // PMC Programmable Clock Output 0 +#define AT91C_PIO_PA10 (1 << 10) // Pin Controlled by PA10 +#define AT91C_PA10_ETX1 (AT91C_PIO_PA10) // Ethernet MAC Transmit Data 1 +#define AT91C_PA10_MCDB1 (AT91C_PIO_PA10) // Multimedia Card B Data 1 +#define AT91C_PIO_PA11 (1 << 11) // Pin Controlled by PA11 +#define AT91C_PA11_ECRS_ECRSDV (AT91C_PIO_PA11) // Ethernet MAC Carrier Sense/Carrier Sense and Data Valid +#define AT91C_PA11_MCDB2 (AT91C_PIO_PA11) // Multimedia Card B Data 2 +#define AT91C_PIO_PA12 (1 << 12) // Pin Controlled by PA12 +#define AT91C_PA12_ERX0 (AT91C_PIO_PA12) // Ethernet MAC Receive Data 0 +#define AT91C_PA12_MCDB3 (AT91C_PIO_PA12) // Multimedia Card B Data 3 +#define AT91C_PIO_PA13 (1 << 13) // Pin Controlled by PA13 +#define AT91C_PA13_ERX1 (AT91C_PIO_PA13) // Ethernet MAC Receive Data 1 +#define AT91C_PA13_TCLK0 (AT91C_PIO_PA13) // Timer Counter 0 external clock input +#define AT91C_PIO_PA14 (1 << 14) // Pin Controlled by PA14 +#define AT91C_PA14_ERXER (AT91C_PIO_PA14) // Ethernet MAC Receive Error +#define AT91C_PA14_TCLK1 (AT91C_PIO_PA14) // Timer Counter 1 external clock input +#define AT91C_PIO_PA15 (1 << 15) // Pin Controlled by PA15 +#define AT91C_PA15_EMDC (AT91C_PIO_PA15) // Ethernet MAC Management Data Clock +#define AT91C_PA15_TCLK2 (AT91C_PIO_PA15) // Timer Counter 2 external clock input +#define AT91C_PIO_PA16 (1 << 16) // Pin Controlled by PA16 +#define AT91C_PA16_EMDIO (AT91C_PIO_PA16) // Ethernet MAC Management Data Input/Output +#define AT91C_PA16_IRQ6 (AT91C_PIO_PA16) // AIC Interrupt input 6 +#define AT91C_PIO_PA17 (1 << 17) // Pin Controlled by PA17 +#define AT91C_PA17_TXD0 (AT91C_PIO_PA17) // USART 0 Transmit Data +#define AT91C_PA17_TIOA0 (AT91C_PIO_PA17) // Timer Counter 0 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA18 (1 << 18) // Pin Controlled by PA18 +#define AT91C_PA18_RXD0 (AT91C_PIO_PA18) // USART 0 Receive Data +#define AT91C_PA18_TIOB0 (AT91C_PIO_PA18) // Timer Counter 0 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA19 (1 << 19) // Pin Controlled by PA19 +#define AT91C_PA19_SCK0 (AT91C_PIO_PA19) // USART 0 Serial Clock +#define AT91C_PA19_TIOA1 (AT91C_PIO_PA19) // Timer Counter 1 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA2 (1 << 2) // Pin Controlled by PA2 +#define AT91C_PA2_SPCK (AT91C_PIO_PA2) // SPI Serial Clock +#define AT91C_PA2_IRQ4 (AT91C_PIO_PA2) // AIC Interrupt Input 4 +#define AT91C_PIO_PA20 (1 << 20) // Pin Controlled by PA20 +#define AT91C_PA20_CTS0 (AT91C_PIO_PA20) // USART 0 Clear To Send +#define AT91C_PA20_TIOB1 (AT91C_PIO_PA20) // Timer Counter 1 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA21 (1 << 21) // Pin Controlled by PA21 +#define AT91C_PA21_RTS0 (AT91C_PIO_PA21) // Usart 0 Ready To Send +#define AT91C_PA21_TIOA2 (AT91C_PIO_PA21) // Timer Counter 2 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA22 (1 << 22) // Pin Controlled by PA22 +#define AT91C_PA22_RXD2 (AT91C_PIO_PA22) // USART 2 Receive Data +#define AT91C_PA22_TIOB2 (AT91C_PIO_PA22) // Timer Counter 2 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA23 (1 << 23) // Pin Controlled by PA23 +#define AT91C_PA23_TXD2 (AT91C_PIO_PA23) // USART 2 Transmit Data +#define AT91C_PA23_IRQ3 (AT91C_PIO_PA23) // Interrupt input 3 +#define AT91C_PIO_PA24 (1 << 24) // Pin Controlled by PA24 +#define AT91C_PA24_SCK2 (AT91C_PIO_PA24) // USART2 Serial Clock +#define AT91C_PA24_PCK1 (AT91C_PIO_PA24) // PMC Programmable Clock Output 1 +#define AT91C_PIO_PA25 (1 << 25) // Pin Controlled by PA25 +#define AT91C_PA25_TWD (AT91C_PIO_PA25) // TWI Two-wire Serial Data +#define AT91C_PA25_IRQ2 (AT91C_PIO_PA25) // Interrupt input 2 +#define AT91C_PIO_PA26 (1 << 26) // Pin Controlled by PA26 +#define AT91C_PA26_TWCK (AT91C_PIO_PA26) // TWI Two-wire Serial Clock +#define AT91C_PA26_IRQ1 (AT91C_PIO_PA26) // Interrupt input 1 +#define AT91C_PIO_PA27 (1 << 27) // Pin Controlled by PA27 +#define AT91C_PA27_MCCK (AT91C_PIO_PA27) // Multimedia Card Clock +#define AT91C_PA27_TCLK3 (AT91C_PIO_PA27) // Timer Counter 3 External Clock Input +#define AT91C_PIO_PA28 (1 << 28) // Pin Controlled by PA28 +#define AT91C_PA28_MCCDA (AT91C_PIO_PA28) // Multimedia Card A Command +#define AT91C_PA28_TCLK4 (AT91C_PIO_PA28) // Timer Counter 4 external Clock Input +#define AT91C_PIO_PA29 (1 << 29) // Pin Controlled by PA29 +#define AT91C_PA29_MCDA0 (AT91C_PIO_PA29) // Multimedia Card A Data 0 +#define AT91C_PA29_TCLK5 (AT91C_PIO_PA29) // Timer Counter 5 external clock input +#define AT91C_PIO_PA3 (1 << 3) // Pin Controlled by PA3 +#define AT91C_PA3_NPCS0 (AT91C_PIO_PA3) // SPI Peripheral Chip Select 0 +#define AT91C_PA3_IRQ5 (AT91C_PIO_PA3) // AIC Interrupt Input 5 +#define AT91C_PIO_PA30 (1 << 30) // Pin Controlled by PA30 +#define AT91C_PA30_DRXD (AT91C_PIO_PA30) // DBGU Debug Receive Data +#define AT91C_PA30_CTS2 (AT91C_PIO_PA30) // Usart 2 Clear To Send +#define AT91C_PIO_PA31 (1 << 31) // Pin Controlled by PA31 +#define AT91C_PA31_DTXD (AT91C_PIO_PA31) // DBGU Debug Transmit Data +#define AT91C_PA31_RTS2 (AT91C_PIO_PA31) // USART 2 Ready To Send +#define AT91C_PIO_PA4 (1 << 4) // Pin Controlled by PA4 +#define AT91C_PA4_NPCS1 (AT91C_PIO_PA4) // SPI Peripheral Chip Select 1 +#define AT91C_PA4_PCK1 (AT91C_PIO_PA4) // PMC Programmable Clock Output 1 +#define AT91C_PIO_PA5 (1 << 5) // Pin Controlled by PA5 +#define AT91C_PA5_NPCS2 (AT91C_PIO_PA5) // SPI Peripheral Chip Select 2 +#define AT91C_PA5_TXD3 (AT91C_PIO_PA5) // USART 3 Transmit Data +#define AT91C_PIO_PA6 (1 << 6) // Pin Controlled by PA6 +#define AT91C_PA6_NPCS3 (AT91C_PIO_PA6) // SPI Peripheral Chip Select 3 +#define AT91C_PA6_RXD3 (AT91C_PIO_PA6) // USART 3 Receive Data +#define AT91C_PIO_PA7 (1 << 7) // Pin Controlled by PA7 +#define AT91C_PA7_ETXCK_EREFCK (AT91C_PIO_PA7) // Ethernet MAC Transmit Clock/Reference Clock +#define AT91C_PA7_PCK2 (AT91C_PIO_PA7) // PMC Programmable Clock 2 +#define AT91C_PIO_PA8 (1 << 8) // Pin Controlled by PA8 +#define AT91C_PA8_ETXEN (AT91C_PIO_PA8) // Ethernet MAC Transmit Enable +#define AT91C_PA8_MCCDB (AT91C_PIO_PA8) // Multimedia Card B Command +#define AT91C_PIO_PA9 (1 << 9) // Pin Controlled by PA9 +#define AT91C_PA9_ETX0 (AT91C_PIO_PA9) // Ethernet MAC Transmit Data 0 +#define AT91C_PA9_MCDB0 (AT91C_PIO_PA9) // Multimedia Card B Data 0 +#define AT91C_PIO_PB0 (1 << 0) // Pin Controlled by PB0 +#define AT91C_PB0_TF0 (AT91C_PIO_PB0) // SSC Transmit Frame Sync 0 +#define AT91C_PB0_TIOB3 (AT91C_PIO_PB0) // Timer Counter 3 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PB1 (1 << 1) // Pin Controlled by PB1 +#define AT91C_PB1_TK0 (AT91C_PIO_PB1) // SSC Transmit Clock 0 +#define AT91C_PB1_CTS3 (AT91C_PIO_PB1) // USART 3 Clear To Send +#define AT91C_PIO_PB10 (1 << 10) // Pin Controlled by PB10 +#define AT91C_PB10_RK1 (AT91C_PIO_PB10) // SSC Receive Clock 1 +#define AT91C_PB10_TIOA5 (AT91C_PIO_PB10) // Timer Counter 5 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PB11 (1 << 11) // Pin Controlled by PB11 +#define AT91C_PB11_RF1 (AT91C_PIO_PB11) // SSC Receive Frame Sync 1 +#define AT91C_PB11_TIOB5 (AT91C_PIO_PB11) // Timer Counter 5 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PB12 (1 << 12) // Pin Controlled by PB12 +#define AT91C_PB12_TF2 (AT91C_PIO_PB12) // SSC Transmit Frame Sync 2 +#define AT91C_PB12_ETX2 (AT91C_PIO_PB12) // Ethernet MAC Transmit Data 2 +#define AT91C_PIO_PB13 (1 << 13) // Pin Controlled by PB13 +#define AT91C_PB13_TK2 (AT91C_PIO_PB13) // SSC Transmit Clock 2 +#define AT91C_PB13_ETX3 (AT91C_PIO_PB13) // Ethernet MAC Transmit Data 3 +#define AT91C_PIO_PB14 (1 << 14) // Pin Controlled by PB14 +#define AT91C_PB14_TD2 (AT91C_PIO_PB14) // SSC Transmit Data 2 +#define AT91C_PB14_ETXER (AT91C_PIO_PB14) // Ethernet MAC Transmikt Coding Error +#define AT91C_PIO_PB15 (1 << 15) // Pin Controlled by PB15 +#define AT91C_PB15_RD2 (AT91C_PIO_PB15) // SSC Receive Data 2 +#define AT91C_PB15_ERX2 (AT91C_PIO_PB15) // Ethernet MAC Receive Data 2 +#define AT91C_PIO_PB16 (1 << 16) // Pin Controlled by PB16 +#define AT91C_PB16_RK2 (AT91C_PIO_PB16) // SSC Receive Clock 2 +#define AT91C_PB16_ERX3 (AT91C_PIO_PB16) // Ethernet MAC Receive Data 3 +#define AT91C_PIO_PB17 (1 << 17) // Pin Controlled by PB17 +#define AT91C_PB17_RF2 (AT91C_PIO_PB17) // SSC Receive Frame Sync 2 +#define AT91C_PB17_ERXDV (AT91C_PIO_PB17) // Ethernet MAC Receive Data Valid +#define AT91C_PIO_PB18 (1 << 18) // Pin Controlled by PB18 +#define AT91C_PB18_RI1 (AT91C_PIO_PB18) // USART 1 Ring Indicator +#define AT91C_PB18_ECOL (AT91C_PIO_PB18) // Ethernet MAC Collision Detected +#define AT91C_PIO_PB19 (1 << 19) // Pin Controlled by PB19 +#define AT91C_PB19_DTR1 (AT91C_PIO_PB19) // USART 1 Data Terminal ready +#define AT91C_PB19_ERXCK (AT91C_PIO_PB19) // Ethernet MAC Receive Clock +#define AT91C_PIO_PB2 (1 << 2) // Pin Controlled by PB2 +#define AT91C_PB2_TD0 (AT91C_PIO_PB2) // SSC Transmit data +#define AT91C_PB2_SCK3 (AT91C_PIO_PB2) // USART 3 Serial Clock +#define AT91C_PIO_PB20 (1 << 20) // Pin Controlled by PB20 +#define AT91C_PB20_TXD1 (AT91C_PIO_PB20) // USART 1 Transmit Data +#define AT91C_PIO_PB21 (1 << 21) // Pin Controlled by PB21 +#define AT91C_PB21_RXD1 (AT91C_PIO_PB21) // USART 1 Receive Data +#define AT91C_PIO_PB22 (1 << 22) // Pin Controlled by PB22 +#define AT91C_PB22_SCK1 (AT91C_PIO_PB22) // USART1 Serial Clock +#define AT91C_PIO_PB23 (1 << 23) // Pin Controlled by PB23 +#define AT91C_PB23_DCD1 (AT91C_PIO_PB23) // USART 1 Data Carrier Detect +#define AT91C_PIO_PB24 (1 << 24) // Pin Controlled by PB24 +#define AT91C_PB24_CTS1 (AT91C_PIO_PB24) // USART 1 Clear To Send +#define AT91C_PIO_PB25 (1 << 25) // Pin Controlled by PB25 +#define AT91C_PB25_DSR1 (AT91C_PIO_PB25) // USART 1 Data Set ready +#define AT91C_PB25_EF100 (AT91C_PIO_PB25) // Ethernet MAC Force 100 Mbits/sec +#define AT91C_PIO_PB26 (1 << 26) // Pin Controlled by PB26 +#define AT91C_PB26_RTS1 (AT91C_PIO_PB26) // Usart 0 Ready To Send +#define AT91C_PIO_PB27 (1 << 27) // Pin Controlled by PB27 +#define AT91C_PB27_PCK0 (AT91C_PIO_PB27) // PMC Programmable Clock Output 0 +#define AT91C_PIO_PB28 (1 << 28) // Pin Controlled by PB28 +#define AT91C_PB28_FIQ (AT91C_PIO_PB28) // AIC Fast Interrupt Input +#define AT91C_PIO_PB29 (1 << 29) // Pin Controlled by PB29 +#define AT91C_PB29_IRQ0 (AT91C_PIO_PB29) // Interrupt input 0 +#define AT91C_PIO_PB3 (1 << 3) // Pin Controlled by PB3 +#define AT91C_PB3_RD0 (AT91C_PIO_PB3) // SSC Receive Data +#define AT91C_PB3_MCDA1 (AT91C_PIO_PB3) // Multimedia Card A Data 1 +#define AT91C_PIO_PB4 (1 << 4) // Pin Controlled by PB4 +#define AT91C_PB4_RK0 (AT91C_PIO_PB4) // SSC Receive Clock +#define AT91C_PB4_MCDA2 (AT91C_PIO_PB4) // Multimedia Card A Data 2 +#define AT91C_PIO_PB5 (1 << 5) // Pin Controlled by PB5 +#define AT91C_PB5_RF0 (AT91C_PIO_PB5) // SSC Receive Frame Sync 0 +#define AT91C_PB5_MCDA3 (AT91C_PIO_PB5) // Multimedia Card A Data 3 +#define AT91C_PIO_PB6 (1 << 6) // Pin Controlled by PB6 +#define AT91C_PB6_TF1 (AT91C_PIO_PB6) // SSC Transmit Frame Sync 1 +#define AT91C_PB6_TIOA3 (AT91C_PIO_PB6) // Timer Counter 4 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PB7 (1 << 7) // Pin Controlled by PB7 +#define AT91C_PB7_TK1 (AT91C_PIO_PB7) // SSC Transmit Clock 1 +#define AT91C_PB7_TIOB3 (AT91C_PIO_PB7) // Timer Counter 3 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PB8 (1 << 8) // Pin Controlled by PB8 +#define AT91C_PB8_TD1 (AT91C_PIO_PB8) // SSC Transmit Data 1 +#define AT91C_PB8_TIOA4 (AT91C_PIO_PB8) // Timer Counter 4 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PB9 (1 << 9) // Pin Controlled by PB9 +#define AT91C_PB9_RD1 (AT91C_PIO_PB9) // SSC Receive Data 1 +#define AT91C_PB9_TIOB4 (AT91C_PIO_PB9) // Timer Counter 4 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PC0 (1 << 0) // Pin Controlled by PC0 +#define AT91C_PC0_BFCK (AT91C_PIO_PC0) // Burst Flash Clock +#define AT91C_PIO_PC1 (1 << 1) // Pin Controlled by PC1 +#define AT91C_PC1_BFRDY_SMOE (AT91C_PIO_PC1) // Burst Flash Ready +#define AT91C_PIO_PC10 (1 << 10) // Pin Controlled by PC10 +#define AT91C_PC10_NCS4_CFCS (AT91C_PIO_PC10) // Compact Flash Chip Select +#define AT91C_PIO_PC11 (1 << 11) // Pin Controlled by PC11 +#define AT91C_PC11_NCS5_CFCE1 (AT91C_PIO_PC11) // Chip Select 5 / Compact Flash Chip Enable 1 +#define AT91C_PIO_PC12 (1 << 12) // Pin Controlled by PC12 +#define AT91C_PC12_NCS6_CFCE2 (AT91C_PIO_PC12) // Chip Select 6 / Compact Flash Chip Enable 2 +#define AT91C_PIO_PC13 (1 << 13) // Pin Controlled by PC13 +#define AT91C_PC13_NCS7 (AT91C_PIO_PC13) // Chip Select 7 +#define AT91C_PIO_PC14 (1 << 14) // Pin Controlled by PC14 +#define AT91C_PIO_PC15 (1 << 15) // Pin Controlled by PC15 +#define AT91C_PIO_PC16 (1 << 16) // Pin Controlled by PC16 +#define AT91C_PC16_D16 (AT91C_PIO_PC16) // Data Bus [16] +#define AT91C_PIO_PC17 (1 << 17) // Pin Controlled by PC17 +#define AT91C_PC17_D17 (AT91C_PIO_PC17) // Data Bus [17] +#define AT91C_PIO_PC18 (1 << 18) // Pin Controlled by PC18 +#define AT91C_PC18_D18 (AT91C_PIO_PC18) // Data Bus [18] +#define AT91C_PIO_PC19 (1 << 19) // Pin Controlled by PC19 +#define AT91C_PC19_D19 (AT91C_PIO_PC19) // Data Bus [19] +#define AT91C_PIO_PC2 (1 << 2) // Pin Controlled by PC2 +#define AT91C_PC2_BFAVD (AT91C_PIO_PC2) // Burst Flash Address Valid +#define AT91C_PIO_PC20 (1 << 20) // Pin Controlled by PC20 +#define AT91C_PC20_D20 (AT91C_PIO_PC20) // Data Bus [20] +#define AT91C_PIO_PC21 (1 << 21) // Pin Controlled by PC21 +#define AT91C_PC21_D21 (AT91C_PIO_PC21) // Data Bus [21] +#define AT91C_PIO_PC22 (1 << 22) // Pin Controlled by PC22 +#define AT91C_PC22_D22 (AT91C_PIO_PC22) // Data Bus [22] +#define AT91C_PIO_PC23 (1 << 23) // Pin Controlled by PC23 +#define AT91C_PC23_D23 (AT91C_PIO_PC23) // Data Bus [23] +#define AT91C_PIO_PC24 (1 << 24) // Pin Controlled by PC24 +#define AT91C_PC24_D24 (AT91C_PIO_PC24) // Data Bus [24] +#define AT91C_PIO_PC25 (1 << 25) // Pin Controlled by PC25 +#define AT91C_PC25_D25 (AT91C_PIO_PC25) // Data Bus [25] +#define AT91C_PIO_PC26 (1 << 26) // Pin Controlled by PC26 +#define AT91C_PC26_D26 (AT91C_PIO_PC26) // Data Bus [26] +#define AT91C_PIO_PC27 (1 << 27) // Pin Controlled by PC27 +#define AT91C_PC27_D27 (AT91C_PIO_PC27) // Data Bus [27] +#define AT91C_PIO_PC28 (1 << 28) // Pin Controlled by PC28 +#define AT91C_PC28_D28 (AT91C_PIO_PC28) // Data Bus [28] +#define AT91C_PIO_PC29 (1 << 29) // Pin Controlled by PC29 +#define AT91C_PC29_D29 (AT91C_PIO_PC29) // Data Bus [29] +#define AT91C_PIO_PC3 (1 << 3) // Pin Controlled by PC3 +#define AT91C_PC3_BFBAA_SMWE (AT91C_PIO_PC3) // Burst Flash Address Advance / SmartMedia Write Enable +#define AT91C_PIO_PC30 (1 << 30) // Pin Controlled by PC30 +#define AT91C_PC30_D30 (AT91C_PIO_PC30) // Data Bus [30] +#define AT91C_PIO_PC31 (1 << 31) // Pin Controlled by PC31 +#define AT91C_PC31_D31 (AT91C_PIO_PC31) // Data Bus [31] +#define AT91C_PIO_PC4 (1 << 4) // Pin Controlled by PC4 +#define AT91C_PC4_BFOE (AT91C_PIO_PC4) // Burst Flash Output Enable +#define AT91C_PIO_PC5 (1 << 5) // Pin Controlled by PC5 +#define AT91C_PC5_BFWE (AT91C_PIO_PC5) // Burst Flash Write Enable +#define AT91C_PIO_PC6 (1 << 6) // Pin Controlled by PC6 +#define AT91C_PC6_NWAIT (AT91C_PIO_PC6) // NWAIT +#define AT91C_PIO_PC7 (1 << 7) // Pin Controlled by PC7 +#define AT91C_PC7_A23 (AT91C_PIO_PC7) // Address Bus[23] +#define AT91C_PIO_PC8 (1 << 8) // Pin Controlled by PC8 +#define AT91C_PC8_A24 (AT91C_PIO_PC8) // Address Bus[24] +#define AT91C_PIO_PC9 (1 << 9) // Pin Controlled by PC9 +#define AT91C_PC9_A25_CFRNW (AT91C_PIO_PC9) // Address Bus[25] / Compact Flash Read Not Write +#define AT91C_PIO_PD0 (1 << 0) // Pin Controlled by PD0 +#define AT91C_PD0_ETX0 (AT91C_PIO_PD0) // Ethernet MAC Transmit Data 0 +#define AT91C_PIO_PD1 (1 << 1) // Pin Controlled by PD1 +#define AT91C_PD1_ETX1 (AT91C_PIO_PD1) // Ethernet MAC Transmit Data 1 +#define AT91C_PIO_PD10 (1 << 10) // Pin Controlled by PD10 +#define AT91C_PD10_PCK3 (AT91C_PIO_PD10) // PMC Programmable Clock Output 3 +#define AT91C_PD10_TPS1 (AT91C_PIO_PD10) // ETM ARM9 pipeline status 1 +#define AT91C_PIO_PD11 (1 << 11) // Pin Controlled by PD11 +#define AT91C_PD11_ (AT91C_PIO_PD11) // +#define AT91C_PD11_TPS2 (AT91C_PIO_PD11) // ETM ARM9 pipeline status 2 +#define AT91C_PIO_PD12 (1 << 12) // Pin Controlled by PD12 +#define AT91C_PD12_ (AT91C_PIO_PD12) // +#define AT91C_PD12_TPK0 (AT91C_PIO_PD12) // ETM Trace Packet 0 +#define AT91C_PIO_PD13 (1 << 13) // Pin Controlled by PD13 +#define AT91C_PD13_ (AT91C_PIO_PD13) // +#define AT91C_PD13_TPK1 (AT91C_PIO_PD13) // ETM Trace Packet 1 +#define AT91C_PIO_PD14 (1 << 14) // Pin Controlled by PD14 +#define AT91C_PD14_ (AT91C_PIO_PD14) // +#define AT91C_PD14_TPK2 (AT91C_PIO_PD14) // ETM Trace Packet 2 +#define AT91C_PIO_PD15 (1 << 15) // Pin Controlled by PD15 +#define AT91C_PD15_TD0 (AT91C_PIO_PD15) // SSC Transmit data +#define AT91C_PD15_TPK3 (AT91C_PIO_PD15) // ETM Trace Packet 3 +#define AT91C_PIO_PD16 (1 << 16) // Pin Controlled by PD16 +#define AT91C_PD16_TD1 (AT91C_PIO_PD16) // SSC Transmit Data 1 +#define AT91C_PD16_TPK4 (AT91C_PIO_PD16) // ETM Trace Packet 4 +#define AT91C_PIO_PD17 (1 << 17) // Pin Controlled by PD17 +#define AT91C_PD17_TD2 (AT91C_PIO_PD17) // SSC Transmit Data 2 +#define AT91C_PD17_TPK5 (AT91C_PIO_PD17) // ETM Trace Packet 5 +#define AT91C_PIO_PD18 (1 << 18) // Pin Controlled by PD18 +#define AT91C_PD18_NPCS1 (AT91C_PIO_PD18) // SPI Peripheral Chip Select 1 +#define AT91C_PD18_TPK6 (AT91C_PIO_PD18) // ETM Trace Packet 6 +#define AT91C_PIO_PD19 (1 << 19) // Pin Controlled by PD19 +#define AT91C_PD19_NPCS2 (AT91C_PIO_PD19) // SPI Peripheral Chip Select 2 +#define AT91C_PD19_TPK7 (AT91C_PIO_PD19) // ETM Trace Packet 7 +#define AT91C_PIO_PD2 (1 << 2) // Pin Controlled by PD2 +#define AT91C_PD2_ETX2 (AT91C_PIO_PD2) // Ethernet MAC Transmit Data 2 +#define AT91C_PIO_PD20 (1 << 20) // Pin Controlled by PD20 +#define AT91C_PD20_NPCS3 (AT91C_PIO_PD20) // SPI Peripheral Chip Select 3 +#define AT91C_PD20_TPK8 (AT91C_PIO_PD20) // ETM Trace Packet 8 +#define AT91C_PIO_PD21 (1 << 21) // Pin Controlled by PD21 +#define AT91C_PD21_RTS0 (AT91C_PIO_PD21) // Usart 0 Ready To Send +#define AT91C_PD21_TPK9 (AT91C_PIO_PD21) // ETM Trace Packet 9 +#define AT91C_PIO_PD22 (1 << 22) // Pin Controlled by PD22 +#define AT91C_PD22_RTS1 (AT91C_PIO_PD22) // Usart 0 Ready To Send +#define AT91C_PD22_TPK10 (AT91C_PIO_PD22) // ETM Trace Packet 10 +#define AT91C_PIO_PD23 (1 << 23) // Pin Controlled by PD23 +#define AT91C_PD23_RTS2 (AT91C_PIO_PD23) // USART 2 Ready To Send +#define AT91C_PD23_TPK11 (AT91C_PIO_PD23) // ETM Trace Packet 11 +#define AT91C_PIO_PD24 (1 << 24) // Pin Controlled by PD24 +#define AT91C_PD24_RTS3 (AT91C_PIO_PD24) // USART 3 Ready To Send +#define AT91C_PD24_TPK12 (AT91C_PIO_PD24) // ETM Trace Packet 12 +#define AT91C_PIO_PD25 (1 << 25) // Pin Controlled by PD25 +#define AT91C_PD25_DTR1 (AT91C_PIO_PD25) // USART 1 Data Terminal ready +#define AT91C_PD25_TPK13 (AT91C_PIO_PD25) // ETM Trace Packet 13 +#define AT91C_PIO_PD26 (1 << 26) // Pin Controlled by PD26 +#define AT91C_PD26_TPK14 (AT91C_PIO_PD26) // ETM Trace Packet 14 +#define AT91C_PIO_PD27 (1 << 27) // Pin Controlled by PD27 +#define AT91C_PD27_TPK15 (AT91C_PIO_PD27) // ETM Trace Packet 15 +#define AT91C_PIO_PD3 (1 << 3) // Pin Controlled by PD3 +#define AT91C_PD3_ETX3 (AT91C_PIO_PD3) // Ethernet MAC Transmit Data 3 +#define AT91C_PIO_PD4 (1 << 4) // Pin Controlled by PD4 +#define AT91C_PD4_ETXEN (AT91C_PIO_PD4) // Ethernet MAC Transmit Enable +#define AT91C_PIO_PD5 (1 << 5) // Pin Controlled by PD5 +#define AT91C_PD5_ETXER (AT91C_PIO_PD5) // Ethernet MAC Transmikt Coding Error +#define AT91C_PIO_PD6 (1 << 6) // Pin Controlled by PD6 +#define AT91C_PD6_DTXD (AT91C_PIO_PD6) // DBGU Debug Transmit Data +#define AT91C_PIO_PD7 (1 << 7) // Pin Controlled by PD7 +#define AT91C_PD7_PCK0 (AT91C_PIO_PD7) // PMC Programmable Clock Output 0 +#define AT91C_PD7_TSYNC (AT91C_PIO_PD7) // ETM Synchronization signal +#define AT91C_PIO_PD8 (1 << 8) // Pin Controlled by PD8 +#define AT91C_PD8_PCK1 (AT91C_PIO_PD8) // PMC Programmable Clock Output 1 +#define AT91C_PD8_TCLK (AT91C_PIO_PD8) // ETM Trace Clock signal +#define AT91C_PIO_PD9 (1 << 9) // Pin Controlled by PD9 +#define AT91C_PD9_PCK2 (AT91C_PIO_PD9) // PMC Programmable Clock 2 +#define AT91C_PD9_TPS0 (AT91C_PIO_PD9) // ETM ARM9 pipeline status 0 + +// ***************************************************************************** +// PERIPHERAL ID DEFINITIONS FOR AT91RM9200 +// ***************************************************************************** +#define AT91C_ID_FIQ ( 0) // Advanced Interrupt Controller (FIQ) +#define AT91C_ID_SYS ( 1) // System Peripheral +#define AT91C_ID_PIOA ( 2) // Parallel IO Controller A +#define AT91C_ID_PIOB ( 3) // Parallel IO Controller B +#define AT91C_ID_PIOC ( 4) // Parallel IO Controller C +#define AT91C_ID_PIOD ( 5) // Parallel IO Controller D +#define AT91C_ID_US0 ( 6) // USART 0 +#define AT91C_ID_US1 ( 7) // USART 1 +#define AT91C_ID_US2 ( 8) // USART 2 +#define AT91C_ID_US3 ( 9) // USART 3 +#define AT91C_ID_MCI (10) // Multimedia Card Interface +#define AT91C_ID_UDP (11) // USB Device Port +#define AT91C_ID_TWI (12) // Two-Wire Interface +#define AT91C_ID_SPI (13) // Serial Peripheral Interface +#define AT91C_ID_SSC0 (14) // Serial Synchronous Controller 0 +#define AT91C_ID_SSC1 (15) // Serial Synchronous Controller 1 +#define AT91C_ID_SSC2 (16) // Serial Synchronous Controller 2 +#define AT91C_ID_TC0 (17) // Timer Counter 0 +#define AT91C_ID_TC1 (18) // Timer Counter 1 +#define AT91C_ID_TC2 (19) // Timer Counter 2 +#define AT91C_ID_TC3 (20) // Timer Counter 3 +#define AT91C_ID_TC4 (21) // Timer Counter 4 +#define AT91C_ID_TC5 (22) // Timer Counter 5 +#define AT91C_ID_UHP (23) // USB Host port +#define AT91C_ID_EMAC (24) // Ethernet MAC +#define AT91C_ID_IRQ0 (25) // Advanced Interrupt Controller (IRQ0) +#define AT91C_ID_IRQ1 (26) // Advanced Interrupt Controller (IRQ1) +#define AT91C_ID_IRQ2 (27) // Advanced Interrupt Controller (IRQ2) +#define AT91C_ID_IRQ3 (28) // Advanced Interrupt Controller (IRQ3) +#define AT91C_ID_IRQ4 (29) // Advanced Interrupt Controller (IRQ4) +#define AT91C_ID_IRQ5 (30) // Advanced Interrupt Controller (IRQ5) +#define AT91C_ID_IRQ6 (31) // Advanced Interrupt Controller (IRQ6) + +// ***************************************************************************** +// BASE ADDRESS DEFINITIONS FOR AT91RM9200 +// ***************************************************************************** +#define AT91C_BASE_SYS (0xFFFFF000) // (SYS) Base Address +#define AT91C_BASE_MC (0xFFFFFF00) // (MC) Base Address +#define AT91C_BASE_RTC (0xFFFFFE00) // (RTC) Base Address +#define AT91C_BASE_ST (0xFFFFFD00) // (ST) Base Address +#define AT91C_BASE_PMC (0xFFFFFC00) // (PMC) Base Address +#define AT91C_BASE_CKGR (0xFFFFFC20) // (CKGR) Base Address +#define AT91C_BASE_PIOD (0xFFFFFA00) // (PIOD) Base Address +#define AT91C_BASE_PIOC (0xFFFFF800) // (PIOC) Base Address +#define AT91C_BASE_PIOB (0xFFFFF600) // (PIOB) Base Address +#define AT91C_BASE_PIOA (0xFFFFF400) // (PIOA) Base Address +#define AT91C_BASE_DBGU (0xFFFFF200) // (DBGU) Base Address +#define AT91C_BASE_PDC_DBGU (0xFFFFF300) // (PDC_DBGU) Base Address +#define AT91C_BASE_AIC (0xFFFFF000) // (AIC) Base Address +#define AT91C_BASE_PDC_SPI (0xFFFE0100) // (PDC_SPI) Base Address +#define AT91C_BASE_SPI (0xFFFE0000) // (SPI) Base Address +#define AT91C_BASE_PDC_SSC2 (0xFFFD8100) // (PDC_SSC2) Base Address +#define AT91C_BASE_SSC2 (0xFFFD8000) // (SSC2) Base Address +#define AT91C_BASE_PDC_SSC1 (0xFFFD4100) // (PDC_SSC1) Base Address +#define AT91C_BASE_SSC1 (0xFFFD4000) // (SSC1) Base Address +#define AT91C_BASE_PDC_SSC0 (0xFFFD0100) // (PDC_SSC0) Base Address +#define AT91C_BASE_SSC0 (0xFFFD0000) // (SSC0) Base Address +#define AT91C_BASE_PDC_US3 (0xFFFCC100) // (PDC_US3) Base Address +#define AT91C_BASE_US3 (0xFFFCC000) // (US3) Base Address +#define AT91C_BASE_PDC_US2 (0xFFFC8100) // (PDC_US2) Base Address +#define AT91C_BASE_US2 (0xFFFC8000) // (US2) Base Address +#define AT91C_BASE_PDC_US1 (0xFFFC4100) // (PDC_US1) Base Address +#define AT91C_BASE_US1 (0xFFFC4000) // (US1) Base Address +#define AT91C_BASE_PDC_US0 (0xFFFC0100) // (PDC_US0) Base Address +#define AT91C_BASE_US0 (0xFFFC0000) // (US0) Base Address +#define AT91C_BASE_TWI (0xFFFB8000) // (TWI) Base Address +#define AT91C_BASE_PDC_MCI (0xFFFB4100) // (PDC_MCI) Base Address +#define AT91C_BASE_MCI (0xFFFB4000) // (MCI) Base Address +#define AT91C_BASE_UDP (0xFFFB0000) // (UDP) Base Address +#define AT91C_BASE_TC5 (0xFFFA4080) // (TC5) Base Address +#define AT91C_BASE_TC4 (0xFFFA4040) // (TC4) Base Address +#define AT91C_BASE_TC3 (0xFFFA4000) // (TC3) Base Address +#define AT91C_BASE_TCB1 (0xFFFA4080) // (TCB1) Base Address +#define AT91C_BASE_TC2 (0xFFFA0080) // (TC2) Base Address +#define AT91C_BASE_TC1 (0xFFFA0040) // (TC1) Base Address +#define AT91C_BASE_TC0 (0xFFFA0000) // (TC0) Base Address +#define AT91C_BASE_TCB0 (0xFFFA0000) // (TCB0) Base Address +#define AT91C_BASE_UHP (0x00300000) // (UHP) Base Address +#define AT91C_BASE_EMAC (0xFFFBC000) // (EMAC) Base Address +#define AT91C_BASE_EBI (0xFFFFFF60) // (EBI) Base Address +#define AT91C_BASE_SMC2 (0xFFFFFF70) // (SMC2) Base Address +#define AT91C_BASE_SDRC (0xFFFFFF90) // (SDRC) Base Address +#define AT91C_BASE_BFC (0xFFFFFFC0) // (BFC) Base Address + +// ***************************************************************************** +// MEMORY MAPPING DEFINITIONS FOR AT91RM9200 +// ***************************************************************************** +#define AT91C_ISRAM (0x00200000) // Internal SRAM base address +#define AT91C_ISRAM_SIZE (0x00004000) // Internal SRAM size in byte (16 Kbyte) +#define AT91C_IROM (0x00100000) // Internal ROM base address +#define AT91C_IROM_SIZE (0x00020000) // Internal ROM size in byte (128 Kbyte) + + diff --git a/target/linux/at91/image/dfboot/src/include/led.h b/target/linux/at91/image/dfboot/src/include/led.h new file mode 100644 index 0000000..9bebd9c --- /dev/null +++ b/target/linux/at91/image/dfboot/src/include/led.h @@ -0,0 +1,49 @@ +/* + * (C) Copyright 2006 + * Atmel Nordic AB <www.atmel.com> + * Ulf Samuelsson <ulf@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + #ifndef __LED_H +#define __LED_H + +#ifndef __ASSEMBLY__ +extern void LED_init (void); +extern void LED_set(unsigned int led); +extern void red_LED_on(void); +extern void red_LED_off(void); +extern void green_LED_on(void); +extern void green_LED_off(void); +extern void yellow_LED_on(void); +extern void yellow_LED_off(void); +extern void LED_blink(unsigned int led); +#else + .extern LED_init + .extern LED_set + .extern LED_blink + .extern red_LED_on + .extern red_LED_off + .extern yellow_LED_on + .extern yellow_LED_off + .extern green_LED_on + .extern green_LED_off +#endif +#endif diff --git a/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h b/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h new file mode 100644 index 0000000..c322b32 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h @@ -0,0 +1,2978 @@ +//*---------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - +//*---------------------------------------------------------------------------- +//* The software is delivered "AS IS" without warranty or condition of any +//* kind, either express, implied or statutory. This includes without +//* limitation any warranty or condition with respect to merchantability or +//* fitness for any particular purpose, or against the infringements of +//* intellectual property rights of others. +//*---------------------------------------------------------------------------- +//* File Name : lib_AT91RM9200.h +//* Object : AT91RM9200 inlined functions +//* Generated : AT91 SW Application Group 11/19/2003 (17:20:51) +//* +//* CVS Reference : /lib_pdc.h/1.2/Tue Jul 02 12:29:40 2002// +//* CVS Reference : /lib_dbgu.h/1.1/Fri Jan 31 12:18:40 2003// +//* CVS Reference : /lib_rtc_1245d.h/1.1/Fri Jan 31 12:19:12 2003// +//* CVS Reference : /lib_ssc.h/1.4/Fri Jan 31 12:19:20 2003// +//* CVS Reference : /lib_spi_AT91RMxxxx.h/1.2/Fri Jan 31 12:19:31 2003// +//* CVS Reference : /lib_tc_1753b.h/1.1/Fri Jan 31 12:20:02 2003// +//* CVS Reference : /lib_pmc.h/1.3/Thu Nov 14 07:40:45 2002// +//* CVS Reference : /lib_pio.h/1.3/Fri Jan 31 12:18:56 2003// +//* CVS Reference : /lib_twi.h/1.2/Fri Jan 31 12:19:38 2003// +//* CVS Reference : /lib_usart.h/1.5/Thu Nov 21 16:01:53 2002// +//* CVS Reference : /lib_mci.h/1.2/Wed Nov 20 14:18:55 2002// +//* CVS Reference : /lib_aic.h/1.3/Fri Jul 12 07:46:11 2002// +//* CVS Reference : /lib_udp.h/1.3/Fri Jan 31 12:19:48 2003// +//* CVS Reference : /lib_st.h/1.4/Fri Jan 31 12:20:13 2003// +//*---------------------------------------------------------------------------- + +#ifndef lib_AT91RM9200_H +#define lib_AT91RM9200_H + +/* ***************************************************************************** + SOFTWARE API FOR PDC + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_SetNextRx +//* \brief Set the next receive transfer descriptor +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_SetNextRx ( + AT91PS_PDC pPDC, // \arg pointer to a PDC controller + char *address, // \arg address to the next bloc to be received + unsigned int bytes) // \arg number of bytes to be received +{ + pPDC->PDC_RNPR = (unsigned int) address; + pPDC->PDC_RNCR = bytes; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_SetNextTx +//* \brief Set the next transmit transfer descriptor +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_SetNextTx ( + AT91PS_PDC pPDC, // \arg pointer to a PDC controller + char *address, // \arg address to the next bloc to be transmitted + unsigned int bytes) // \arg number of bytes to be transmitted +{ + pPDC->PDC_TNPR = (unsigned int) address; + pPDC->PDC_TNCR = bytes; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_SetRx +//* \brief Set the receive transfer descriptor +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_SetRx ( + AT91PS_PDC pPDC, // \arg pointer to a PDC controller + char *address, // \arg address to the next bloc to be received + unsigned int bytes) // \arg number of bytes to be received +{ + pPDC->PDC_RPR = (unsigned int) address; + pPDC->PDC_RCR = bytes; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_SetTx +//* \brief Set the transmit transfer descriptor +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_SetTx ( + AT91PS_PDC pPDC, // \arg pointer to a PDC controller + char *address, // \arg address to the next bloc to be transmitted + unsigned int bytes) // \arg number of bytes to be transmitted +{ + pPDC->PDC_TPR = (unsigned int) address; + pPDC->PDC_TCR = bytes; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_EnableTx +//* \brief Enable transmit +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_EnableTx ( + AT91PS_PDC pPDC ) // \arg pointer to a PDC controller +{ + pPDC->PDC_PTCR = AT91C_PDC_TXTEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_EnableRx +//* \brief Enable receive +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_EnableRx ( + AT91PS_PDC pPDC ) // \arg pointer to a PDC controller +{ + pPDC->PDC_PTCR = AT91C_PDC_RXTEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_DisableTx +//* \brief Disable transmit +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_DisableTx ( + AT91PS_PDC pPDC ) // \arg pointer to a PDC controller +{ + pPDC->PDC_PTCR = AT91C_PDC_TXTDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_DisableRx +//* \brief Disable receive +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_DisableRx ( + AT91PS_PDC pPDC ) // \arg pointer to a PDC controller +{ + pPDC->PDC_PTCR = AT91C_PDC_RXTDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_IsTxEmpty +//* \brief Test if the current transfer descriptor has been sent +//*---------------------------------------------------------------------------- +static inline int AT91F_PDC_IsTxEmpty ( // \return return 1 if transfer is complete + AT91PS_PDC pPDC ) // \arg pointer to a PDC controller +{ + return !(pPDC->PDC_TCR); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_IsNextTxEmpty +//* \brief Test if the next transfer descriptor has been moved to the current td +//*---------------------------------------------------------------------------- +static inline int AT91F_PDC_IsNextTxEmpty ( // \return return 1 if transfer is complete + AT91PS_PDC pPDC ) // \arg pointer to a PDC controller +{ + return !(pPDC->PDC_TNCR); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_IsRxEmpty +//* \brief Test if the current transfer descriptor has been filled +//*---------------------------------------------------------------------------- +static inline int AT91F_PDC_IsRxEmpty ( // \return return 1 if transfer is complete + AT91PS_PDC pPDC ) // \arg pointer to a PDC controller +{ + return !(pPDC->PDC_RCR); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_IsNextRxEmpty +//* \brief Test if the next transfer descriptor has been moved to the current td +//*---------------------------------------------------------------------------- +static inline int AT91F_PDC_IsNextRxEmpty ( // \return return 1 if transfer is complete + AT91PS_PDC pPDC ) // \arg pointer to a PDC controller +{ + return !(pPDC->PDC_RNCR); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_Open +//* \brief Open PDC: disable TX and RX reset transfer descriptors, re-enable RX and TX +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_Open ( + AT91PS_PDC pPDC) // \arg pointer to a PDC controller +{ + //* Disable the RX and TX PDC transfer requests + AT91F_PDC_DisableRx(pPDC); + AT91F_PDC_DisableTx(pPDC); + + //* Reset all Counter register Next buffer first + AT91F_PDC_SetNextTx(pPDC, (char *) 0, 0); + AT91F_PDC_SetNextRx(pPDC, (char *) 0, 0); + AT91F_PDC_SetTx(pPDC, (char *) 0, 0); + AT91F_PDC_SetRx(pPDC, (char *) 0, 0); + + //* Enable the RX and TX PDC transfer requests + AT91F_PDC_EnableRx(pPDC); + AT91F_PDC_EnableTx(pPDC); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_Close +//* \brief Close PDC: disable TX and RX reset transfer descriptors +//*---------------------------------------------------------------------------- +static inline void AT91F_PDC_Close ( + AT91PS_PDC pPDC) // \arg pointer to a PDC controller +{ + //* Disable the RX and TX PDC transfer requests + AT91F_PDC_DisableRx(pPDC); + AT91F_PDC_DisableTx(pPDC); + + //* Reset all Counter register Next buffer first + AT91F_PDC_SetNextTx(pPDC, (char *) 0, 0); + AT91F_PDC_SetNextRx(pPDC, (char *) 0, 0); + AT91F_PDC_SetTx(pPDC, (char *) 0, 0); + AT91F_PDC_SetRx(pPDC, (char *) 0, 0); + +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_SendFrame +//* \brief Close PDC: disable TX and RX reset transfer descriptors +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PDC_SendFrame( + AT91PS_PDC pPDC, + char *pBuffer, + unsigned int szBuffer, + char *pNextBuffer, + unsigned int szNextBuffer ) +{ + if (AT91F_PDC_IsTxEmpty(pPDC)) { + //* Buffer and next buffer can be initialized + AT91F_PDC_SetTx(pPDC, pBuffer, szBuffer); + AT91F_PDC_SetNextTx(pPDC, pNextBuffer, szNextBuffer); + return 2; + } + else if (AT91F_PDC_IsNextTxEmpty(pPDC)) { + //* Only one buffer can be initialized + AT91F_PDC_SetNextTx(pPDC, pBuffer, szBuffer); + return 1; + } + else { + //* All buffer are in use... + return 0; + } +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PDC_ReceiveFrame +//* \brief Close PDC: disable TX and RX reset transfer descriptors +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PDC_ReceiveFrame ( + AT91PS_PDC pPDC, + char *pBuffer, + unsigned int szBuffer, + char *pNextBuffer, + unsigned int szNextBuffer ) +{ + if (AT91F_PDC_IsRxEmpty(pPDC)) { + //* Buffer and next buffer can be initialized + AT91F_PDC_SetRx(pPDC, pBuffer, szBuffer); + AT91F_PDC_SetNextRx(pPDC, pNextBuffer, szNextBuffer); + return 2; + } + else if (AT91F_PDC_IsNextRxEmpty(pPDC)) { + //* Only one buffer can be initialized + AT91F_PDC_SetNextRx(pPDC, pBuffer, szBuffer); + return 1; + } + else { + //* All buffer are in use... + return 0; + } +} +/* ***************************************************************************** + SOFTWARE API FOR DBGU + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_DBGU_InterruptEnable +//* \brief Enable DBGU Interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_DBGU_InterruptEnable( + AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller + unsigned int flag) // \arg dbgu interrupt to be enabled +{ + pDbgu->DBGU_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_DBGU_InterruptDisable +//* \brief Disable DBGU Interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_DBGU_InterruptDisable( + AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller + unsigned int flag) // \arg dbgu interrupt to be disabled +{ + pDbgu->DBGU_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_DBGU_GetInterruptMaskStatus +//* \brief Return DBGU Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_DBGU_GetInterruptMaskStatus( // \return DBGU Interrupt Mask Status + AT91PS_DBGU pDbgu) // \arg pointer to a DBGU controller +{ + return pDbgu->DBGU_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_DBGU_IsInterruptMasked +//* \brief Test if DBGU Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_DBGU_IsInterruptMasked( + AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_DBGU_GetInterruptMaskStatus(pDbgu) & flag); +} + +/* ***************************************************************************** + SOFTWARE API FOR RTC + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_RTC_InterruptEnable +//* \brief Enable RTC Interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_RTC_InterruptEnable( + AT91PS_RTC pRtc, // \arg pointer to a RTC controller + unsigned int flag) // \arg RTC interrupt to be enabled +{ + pRtc->RTC_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_RTC_InterruptDisable +//* \brief Disable RTC Interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_RTC_InterruptDisable( + AT91PS_RTC pRtc, // \arg pointer to a RTC controller + unsigned int flag) // \arg RTC interrupt to be disabled +{ + pRtc->RTC_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_RTC_GetInterruptMaskStatus +//* \brief Return RTC Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_RTC_GetInterruptMaskStatus( // \return RTC Interrupt Mask Status + AT91PS_RTC pRtc) // \arg pointer to a RTC controller +{ + return pRtc->RTC_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_RTC_IsInterruptMasked +//* \brief Test if RTC Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_RTC_IsInterruptMasked( + AT91PS_RTC pRtc, // \arg pointer to a RTC controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_RTC_GetInterruptMaskStatus(pRtc) & flag); +} + +/* ***************************************************************************** + SOFTWARE API FOR SSC + ***************************************************************************** */ +//* Define the standard I2S mode configuration + +//* Configuration to set in the SSC Transmit Clock Mode Register +//* Parameters : nb_bit_by_slot : 8, 16 or 32 bits +//* nb_slot_by_frame : number of channels +#define AT91C_I2S_ASY_MASTER_TX_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\ + AT91C_SSC_CKS_DIV +\ + AT91C_SSC_CKO_CONTINOUS +\ + AT91C_SSC_CKG_NONE +\ + AT91C_SSC_START_FALL_RF +\ + AT91C_SSC_STTOUT +\ + ((1<<16) & AT91C_SSC_STTDLY) +\ + ((((nb_bit_by_slot*nb_slot_by_frame)/2)-1) <<24)) + + +//* Configuration to set in the SSC Transmit Frame Mode Register +//* Parameters : nb_bit_by_slot : 8, 16 or 32 bits +//* nb_slot_by_frame : number of channels +#define AT91C_I2S_ASY_TX_FRAME_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\ + (nb_bit_by_slot-1) +\ + AT91C_SSC_MSBF +\ + (((nb_slot_by_frame-1)<<8) & AT91C_SSC_DATNB) +\ + (((nb_bit_by_slot-1)<<16) & AT91C_SSC_FSLEN) +\ + AT91C_SSC_FSOS_NEGATIVE) + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_SetBaudrate +//* \brief Set the baudrate according to the CPU clock +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC_SetBaudrate ( + AT91PS_SSC pSSC, // \arg pointer to a SSC controller + unsigned int mainClock, // \arg peripheral clock + unsigned int speed) // \arg SSC baudrate +{ + unsigned int baud_value; + //* Define the baud rate divisor register + if (speed == 0) + baud_value = 0; + else + { + baud_value = (unsigned int) (mainClock * 10)/(2*speed); + if ((baud_value % 10) >= 5) + baud_value = (baud_value / 10) + 1; + else + baud_value /= 10; + } + + pSSC->SSC_CMR = baud_value; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_Configure +//* \brief Configure SSC +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC_Configure ( + AT91PS_SSC pSSC, // \arg pointer to a SSC controller + unsigned int syst_clock, // \arg System Clock Frequency + unsigned int baud_rate, // \arg Expected Baud Rate Frequency + unsigned int clock_rx, // \arg Receiver Clock Parameters + unsigned int mode_rx, // \arg mode Register to be programmed + unsigned int clock_tx, // \arg Transmitter Clock Parameters + unsigned int mode_tx) // \arg mode Register to be programmed +{ + //* Disable interrupts + pSSC->SSC_IDR = (unsigned int) -1; + + //* Reset receiver and transmitter + pSSC->SSC_CR = AT91C_SSC_SWRST | AT91C_SSC_RXDIS | AT91C_SSC_TXDIS ; + + //* Define the Clock Mode Register + AT91F_SSC_SetBaudrate(pSSC, syst_clock, baud_rate); + + //* Write the Receive Clock Mode Register + pSSC->SSC_RCMR = clock_rx; + + //* Write the Transmit Clock Mode Register + pSSC->SSC_TCMR = clock_tx; + + //* Write the Receive Frame Mode Register + pSSC->SSC_RFMR = mode_rx; + + //* Write the Transmit Frame Mode Register + pSSC->SSC_TFMR = mode_tx; + + //* Clear Transmit and Receive Counters + AT91F_PDC_Open((AT91PS_PDC) &(pSSC->SSC_RPR)); + + +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_EnableRx +//* \brief Enable receiving datas +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC_EnableRx ( + AT91PS_SSC pSSC) // \arg pointer to a SSC controller +{ + //* Enable receiver + pSSC->SSC_CR = AT91C_SSC_RXEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_DisableRx +//* \brief Disable receiving datas +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC_DisableRx ( + AT91PS_SSC pSSC) // \arg pointer to a SSC controller +{ + //* Disable receiver + pSSC->SSC_CR = AT91C_SSC_RXDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_EnableTx +//* \brief Enable sending datas +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC_EnableTx ( + AT91PS_SSC pSSC) // \arg pointer to a SSC controller +{ + //* Enable transmitter + pSSC->SSC_CR = AT91C_SSC_TXEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_DisableTx +//* \brief Disable sending datas +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC_DisableTx ( + AT91PS_SSC pSSC) // \arg pointer to a SSC controller +{ + //* Disable transmitter + pSSC->SSC_CR = AT91C_SSC_TXDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_EnableIt +//* \brief Enable SSC IT +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC_EnableIt ( + AT91PS_SSC pSSC, // \arg pointer to a SSC controller + unsigned int flag) // \arg IT to be enabled +{ + //* Write to the IER register + pSSC->SSC_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_DisableIt +//* \brief Disable SSC IT +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC_DisableIt ( + AT91PS_SSC pSSC, // \arg pointer to a SSC controller + unsigned int flag) // \arg IT to be disabled +{ + //* Write to the IDR register + pSSC->SSC_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_ReceiveFrame +//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initialized with Next Buffer, 0 if PDC is busy +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_SSC_ReceiveFrame ( + AT91PS_SSC pSSC, + char *pBuffer, + unsigned int szBuffer, + char *pNextBuffer, + unsigned int szNextBuffer ) +{ + return AT91F_PDC_ReceiveFrame( + (AT91PS_PDC) &(pSSC->SSC_RPR), + pBuffer, + szBuffer, + pNextBuffer, + szNextBuffer); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_SendFrame +//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initialized with Next Buffer, 0 if PDC is busy +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_SSC_SendFrame( + AT91PS_SSC pSSC, + char *pBuffer, + unsigned int szBuffer, + char *pNextBuffer, + unsigned int szNextBuffer ) +{ + return AT91F_PDC_SendFrame( + (AT91PS_PDC) &(pSSC->SSC_RPR), + pBuffer, + szBuffer, + pNextBuffer, + szNextBuffer); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_GetInterruptMaskStatus +//* \brief Return SSC Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_SSC_GetInterruptMaskStatus( // \return SSC Interrupt Mask Status + AT91PS_SSC pSsc) // \arg pointer to a SSC controller +{ + return pSsc->SSC_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC_IsInterruptMasked +//* \brief Test if SSC Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_SSC_IsInterruptMasked( + AT91PS_SSC pSsc, // \arg pointer to a SSC controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_SSC_GetInterruptMaskStatus(pSsc) & flag); +} + +/* ***************************************************************************** + SOFTWARE API FOR SPI + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_Open +//* \brief Open a SPI Port +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_SPI_Open ( + const unsigned int null) // \arg +{ + /* NOT DEFINED AT THIS MOMENT */ + return ( 0 ); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_CfgCs +//* \brief Configure SPI chip select register +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_CfgCs ( + int cs, // SPI cs number (0 to 3) + int val) // chip select register +{ + //* Write to the CSR register + *(AT91C_SPI_CSR + cs) = val; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_EnableIt +//* \brief Enable SPI interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_EnableIt ( + AT91PS_SPI pSPI, // pointer to a SPI controller + unsigned int flag) // IT to be enabled +{ + //* Write to the IER register + pSPI->SPI_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_DisableIt +//* \brief Disable SPI interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_DisableIt ( + AT91PS_SPI pSPI, // pointer to a SPI controller + unsigned int flag) // IT to be disabled +{ + //* Write to the IDR register + pSPI->SPI_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_Reset +//* \brief Reset the SPI controller +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_Reset ( + AT91PS_SPI pSPI // pointer to a SPI controller + ) +{ + //* Write to the CR register + pSPI->SPI_CR = AT91C_SPI_SWRST; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_Enable +//* \brief Enable the SPI controller +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_Enable ( + AT91PS_SPI pSPI // pointer to a SPI controller + ) +{ + //* Write to the CR register + pSPI->SPI_CR = AT91C_SPI_SPIEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_Disable +//* \brief Disable the SPI controller +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_Disable ( + AT91PS_SPI pSPI // pointer to a SPI controller + ) +{ + //* Write to the CR register + pSPI->SPI_CR = AT91C_SPI_SPIDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_CfgMode +//* \brief Enable the SPI controller +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_CfgMode ( + AT91PS_SPI pSPI, // pointer to a SPI controller + int mode) // mode register +{ + //* Write to the MR register + pSPI->SPI_MR = mode; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_CfgPCS +//* \brief Switch to the correct PCS of SPI Mode Register : Fixed Peripheral Selected +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_CfgPCS ( + AT91PS_SPI pSPI, // pointer to a SPI controller + char PCS_Device) // PCS of the Device +{ + //* Write to the MR register + pSPI->SPI_MR &= 0xFFF0FFFF; + pSPI->SPI_MR |= ( (PCS_Device<<16) & AT91C_SPI_PCS ); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_ReceiveFrame +//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_SPI_ReceiveFrame ( + AT91PS_SPI pSPI, + char *pBuffer, + unsigned int szBuffer, + char *pNextBuffer, + unsigned int szNextBuffer ) +{ + return AT91F_PDC_ReceiveFrame( + (AT91PS_PDC) &(pSPI->SPI_RPR), + pBuffer, + szBuffer, + pNextBuffer, + szNextBuffer); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_SendFrame +//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is bSPIy +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_SPI_SendFrame( + AT91PS_SPI pSPI, + char *pBuffer, + unsigned int szBuffer, + char *pNextBuffer, + unsigned int szNextBuffer ) +{ + return AT91F_PDC_SendFrame( + (AT91PS_PDC) &(pSPI->SPI_RPR), + pBuffer, + szBuffer, + pNextBuffer, + szNextBuffer); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_Close +//* \brief Close SPI: disable IT disable transfert, close PDC +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_Close ( + AT91PS_SPI pSPI) // \arg pointer to a SPI controller +{ + //* Reset all the Chip Select register + pSPI->SPI_CSR[0] = 0 ; + pSPI->SPI_CSR[1] = 0 ; + pSPI->SPI_CSR[2] = 0 ; + pSPI->SPI_CSR[3] = 0 ; + + //* Reset the SPI mode + pSPI->SPI_MR = 0 ; + + //* Disable all interrupts + pSPI->SPI_IDR = 0xFFFFFFFF ; + + //* Abort the Peripheral Data Transfers + AT91F_PDC_Close((AT91PS_PDC) &(pSPI->SPI_RPR)); + + //* Disable receiver and transmitter and stop any activity immediately + pSPI->SPI_CR = AT91C_SPI_SPIDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_PutChar +//* \brief Send a character,does not check if ready to send +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_PutChar ( + AT91PS_SPI pSPI, + unsigned int character, + unsigned int cs_number ) +{ + unsigned int value_for_cs; + value_for_cs = (~(1 << cs_number)) & 0xF; //Place a zero among a 4 ONEs number + pSPI->SPI_TDR = (character & 0xFFFF) | (value_for_cs << 16); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_GetChar +//* \brief Receive a character,does not check if a character is available +//*---------------------------------------------------------------------------- +static inline int AT91F_SPI_GetChar ( + const AT91PS_SPI pSPI) +{ + return((pSPI->SPI_RDR) & 0xFFFF); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_GetInterruptMaskStatus +//* \brief Return SPI Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_SPI_GetInterruptMaskStatus( // \return SPI Interrupt Mask Status + AT91PS_SPI pSpi) // \arg pointer to a SPI controller +{ + return pSpi->SPI_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_IsInterruptMasked +//* \brief Test if SPI Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_SPI_IsInterruptMasked( + AT91PS_SPI pSpi, // \arg pointer to a SPI controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_SPI_GetInterruptMaskStatus(pSpi) & flag); +} + +/* ***************************************************************************** + SOFTWARE API FOR TC + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC_InterruptEnable +//* \brief Enable TC Interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_TC_InterruptEnable( + AT91PS_TC pTc, // \arg pointer to a TC controller + unsigned int flag) // \arg TC interrupt to be enabled +{ + pTc->TC_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC_InterruptDisable +//* \brief Disable TC Interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_TC_InterruptDisable( + AT91PS_TC pTc, // \arg pointer to a TC controller + unsigned int flag) // \arg TC interrupt to be disabled +{ + pTc->TC_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC_GetInterruptMaskStatus +//* \brief Return TC Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_TC_GetInterruptMaskStatus( // \return TC Interrupt Mask Status + AT91PS_TC pTc) // \arg pointer to a TC controller +{ + return pTc->TC_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC_IsInterruptMasked +//* \brief Test if TC Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_TC_IsInterruptMasked( + AT91PS_TC pTc, // \arg pointer to a TC controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_TC_GetInterruptMaskStatus(pTc) & flag); +} + +/* ***************************************************************************** + SOFTWARE API FOR PMC + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_CKGR_GetMainClock +//* \brief Return Main clock in Hz +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_CKGR_GetMainClock ( + AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller + unsigned int slowClock) // \arg slowClock in Hz +{ + return ((pCKGR->CKGR_MCFR & AT91C_CKGR_MAINF) * slowClock) >> 4; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PMC_GetProcessorClock +//* \brief Return processor clock in Hz (for AT91RM3400 and AT91RM9200) +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PMC_GetProcessorClock ( + AT91PS_PMC pPMC, // \arg pointer to PMC controller + AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller + unsigned int slowClock) // \arg slowClock in Hz +{ + unsigned int reg = pPMC->PMC_MCKR; + unsigned int prescaler = (1 << ((reg & AT91C_PMC_PRES) >> 2)); + unsigned int pllDivider, pllMultiplier; + + switch (reg & AT91C_PMC_CSS) { + case AT91C_PMC_CSS_SLOW_CLK: // Slow clock selected + return slowClock / prescaler; + case AT91C_PMC_CSS_MAIN_CLK: // Main clock is selected + return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / prescaler; + case AT91C_PMC_CSS_PLLA_CLK: // PLLA clock is selected + reg = pCKGR->CKGR_PLLAR; + pllDivider = (reg & AT91C_CKGR_DIVA); + pllMultiplier = ((reg & AT91C_CKGR_MULA) >> 16) + 1; + if (reg & AT91C_CKGR_SRCA) // Source is Main clock + return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler; + else // Source is Slow clock + return slowClock / pllDivider * pllMultiplier / prescaler; + case AT91C_PMC_CSS_PLLB_CLK: // PLLB clock is selected + reg = pCKGR->CKGR_PLLBR; + pllDivider = (reg & AT91C_CKGR_DIVB); + pllMultiplier = ((reg & AT91C_CKGR_MULB) >> 16) + 1; + return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler; + } + return 0; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PMC_GetMasterClock +//* \brief Return master clock in Hz (just for AT91RM9200) +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PMC_GetMasterClock ( + AT91PS_PMC pPMC, // \arg pointer to PMC controller + AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller + unsigned int slowClock) // \arg slowClock in Hz +{ + return AT91F_PMC_GetProcessorClock(pPMC, pCKGR, slowClock) / + (((pPMC->PMC_MCKR & AT91C_PMC_MDIV) >> 8)+1); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PMC_EnablePeriphClock +//* \brief Enable peripheral clock +//*---------------------------------------------------------------------------- +static inline void AT91F_PMC_EnablePeriphClock ( + AT91PS_PMC pPMC, // \arg pointer to PMC controller + unsigned int periphIds) // \arg IDs of peripherals to enable +{ + pPMC->PMC_PCER = periphIds; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PMC_DisablePeriphClock +//* \brief Enable peripheral clock +//*---------------------------------------------------------------------------- +static inline void AT91F_PMC_DisablePeriphClock ( + AT91PS_PMC pPMC, // \arg pointer to PMC controller + unsigned int periphIds) // \arg IDs of peripherals to enable +{ + pPMC->PMC_PCDR = periphIds; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PMC_EnablePCK +//* \brief Enable peripheral clock +//*---------------------------------------------------------------------------- +static inline void AT91F_PMC_EnablePCK ( + AT91PS_PMC pPMC, // \arg pointer to PMC controller + unsigned int pck, // \arg Peripheral clock identifier 0 .. 7 + unsigned int ccs, // \arg clock selection: AT91C_PMC_CSS_SLOW_CLK, AT91C_PMC_CSS_MAIN_CLK, AT91C_PMC_CSS_PLLA_CLK, AT91C_PMC_CSS_PLLB_CLK + unsigned int pres) // \arg Programmable clock prescalar AT91C_PMC_PRES_CLK, AT91C_PMC_PRES_CLK_2, ..., AT91C_PMC_PRES_CLK_64 +{ + pPMC->PMC_PCKR[pck] = ccs | pres; + pPMC->PMC_SCER = (1 << pck) << 8; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PMC_DisablePCK +//* \brief Enable peripheral clock +//*---------------------------------------------------------------------------- +static inline void AT91F_PMC_DisablePCK ( + AT91PS_PMC pPMC, // \arg pointer to PMC controller + unsigned int pck) // \arg Peripheral clock identifier 0 .. 7 +{ + pPMC->PMC_SCDR = (1 << pck) << 8; +} + +/* ***************************************************************************** + SOFTWARE API FOR PIO + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_CfgPeriph +//* \brief Enable pins to be drived by peripheral +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_CfgPeriph( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int periphAEnable, // \arg PERIPH A to enable + unsigned int periphBEnable) // \arg PERIPH B to enable + +{ + pPio->PIO_ASR = periphAEnable; + pPio->PIO_BSR = periphBEnable; + pPio->PIO_PDR = (periphAEnable | periphBEnable); // Set in Periph mode +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_CfgOutput +//* \brief Enable PIO in output mode +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_CfgOutput( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int pioEnable) // \arg PIO to be enabled +{ + pPio->PIO_PER = pioEnable; // Set in PIO mode + pPio->PIO_OER = pioEnable; // Configure in Output +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_CfgInput +//* \brief Enable PIO in input mode +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_CfgInput( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int inputEnable) // \arg PIO to be enabled +{ + // Disable output + pPio->PIO_ODR = inputEnable; + pPio->PIO_PER = inputEnable; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_CfgOpendrain +//* \brief Configure PIO in open drain +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_CfgOpendrain( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int multiDrvEnable) // \arg pio to be configured in open drain +{ + // Configure the multi-drive option + pPio->PIO_MDDR = ~multiDrvEnable; + pPio->PIO_MDER = multiDrvEnable; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_CfgPullup +//* \brief Enable pullup on PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_CfgPullup( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int pullupEnable) // \arg enable pullup on PIO +{ + // Connect or not Pullup + pPio->PIO_PPUDR = ~pullupEnable; + pPio->PIO_PPUER = pullupEnable; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_CfgDirectDrive +//* \brief Enable direct drive on PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_CfgDirectDrive( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int directDrive) // \arg PIO to be configured with direct drive + +{ + // Configure the Direct Drive + pPio->PIO_OWDR = ~directDrive; + pPio->PIO_OWER = directDrive; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_CfgInputFilter +//* \brief Enable input filter on input PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_CfgInputFilter( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int inputFilter) // \arg PIO to be configured with input filter + +{ + // Configure the Direct Drive + pPio->PIO_IFDR = ~inputFilter; + pPio->PIO_IFER = inputFilter; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetInput +//* \brief Return PIO input value +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetInput( // \return PIO input + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_PDSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsInputSet +//* \brief Test if PIO is input flag is active +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsInputSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetInput(pPio) & flag); +} + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_SetOutput +//* \brief Set to 1 output PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_SetOutput( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg output to be set +{ + pPio->PIO_SODR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_ClearOutput +//* \brief Set to 0 output PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_ClearOutput( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg output to be cleared +{ + pPio->PIO_CODR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_ForceOutput +//* \brief Force output when Direct drive option is enabled +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_ForceOutput( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg output to be forced +{ + pPio->PIO_ODSR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_Enable +//* \brief Enable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_Enable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio to be enabled +{ + pPio->PIO_PER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_Disable +//* \brief Disable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_Disable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio to be disabled +{ + pPio->PIO_PDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetStatus +//* \brief Return PIO Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetStatus( // \return PIO Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_PSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsSet +//* \brief Test if PIO is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_OutputEnable +//* \brief Output Enable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_OutputEnable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio output to be enabled +{ + pPio->PIO_OER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_OutputDisable +//* \brief Output Enable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_OutputDisable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio output to be disabled +{ + pPio->PIO_ODR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetOutputStatus +//* \brief Return PIO Output Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetOutputStatus( // \return PIO Output Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_OSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsOuputSet +//* \brief Test if PIO Output is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsOutputSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetOutputStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_InputFilterEnable +//* \brief Input Filter Enable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_InputFilterEnable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio input filter to be enabled +{ + pPio->PIO_IFER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_InputFilterDisable +//* \brief Input Filter Disable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_InputFilterDisable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio input filter to be disabled +{ + pPio->PIO_IFDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetInputFilterStatus +//* \brief Return PIO Input Filter Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetInputFilterStatus( // \return PIO Input Filter Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_IFSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsInputFilterSet +//* \brief Test if PIO Input filter is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsInputFilterSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetInputFilterStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetOutputDataStatus +//* \brief Return PIO Output Data Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetOutputDataStatus( // \return PIO Output Data Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_ODSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_InterruptEnable +//* \brief Enable PIO Interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_InterruptEnable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio interrupt to be enabled +{ + pPio->PIO_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_InterruptDisable +//* \brief Disable PIO Interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_InterruptDisable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio interrupt to be disabled +{ + pPio->PIO_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetInterruptMaskStatus +//* \brief Return PIO Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetInterruptMaskStatus( // \return PIO Interrupt Mask Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetInterruptStatus +//* \brief Return PIO Interrupt Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetInterruptStatus( // \return PIO Interrupt Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_ISR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsInterruptMasked +//* \brief Test if PIO Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsInterruptMasked( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetInterruptMaskStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsInterruptSet +//* \brief Test if PIO Interrupt is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsInterruptSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetInterruptStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_MultiDriverEnable +//* \brief Multi Driver Enable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_MultiDriverEnable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio to be enabled +{ + pPio->PIO_MDER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_MultiDriverDisable +//* \brief Multi Driver Disable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_MultiDriverDisable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio to be disabled +{ + pPio->PIO_MDDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetMultiDriverStatus +//* \brief Return PIO Multi Driver Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetMultiDriverStatus( // \return PIO Multi Driver Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_MDSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsMultiDriverSet +//* \brief Test if PIO MultiDriver is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsMultiDriverSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetMultiDriverStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_A_RegisterSelection +//* \brief PIO A Register Selection +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_A_RegisterSelection( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio A register selection +{ + pPio->PIO_ASR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_B_RegisterSelection +//* \brief PIO B Register Selection +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_B_RegisterSelection( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio B register selection +{ + pPio->PIO_BSR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_Get_AB_RegisterStatus +//* \brief Return PIO Interrupt Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_Get_AB_RegisterStatus( // \return PIO AB Register Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_ABSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsAB_RegisterSet +//* \brief Test if PIO AB Register is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsAB_RegisterSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_Get_AB_RegisterStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_OutputWriteEnable +//* \brief Output Write Enable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_OutputWriteEnable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio output write to be enabled +{ + pPio->PIO_OWER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_OutputWriteDisable +//* \brief Output Write Disable PIO +//*---------------------------------------------------------------------------- +static inline void AT91F_PIO_OutputWriteDisable( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg pio output write to be disabled +{ + pPio->PIO_OWDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetOutputWriteStatus +//* \brief Return PIO Output Write Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetOutputWriteStatus( // \return PIO Output Write Status + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_OWSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsOutputWriteSet +//* \brief Test if PIO OutputWrite is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsOutputWriteSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetOutputWriteStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_GetCfgPullup +//* \brief Return PIO Configuration Pullup +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_PIO_GetCfgPullup( // \return PIO Configuration Pullup + AT91PS_PIO pPio) // \arg pointer to a PIO controller +{ + return pPio->PIO_PPUSR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsOutputDataStatusSet +//* \brief Test if PIO Output Data Status is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsOutputDataStatusSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_PIO_GetOutputDataStatus(pPio) & flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIO_IsCfgPullupStatusSet +//* \brief Test if PIO Configuration Pullup Status is Set +//*---------------------------------------------------------------------------- +static inline int AT91F_PIO_IsCfgPullupStatusSet( + AT91PS_PIO pPio, // \arg pointer to a PIO controller + unsigned int flag) // \arg flag to be tested +{ + return (~AT91F_PIO_GetCfgPullup(pPio) & flag); +} + +/* ***************************************************************************** + SOFTWARE API FOR TWI + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_TWI_EnableIt +//* \brief Enable TWI IT +//*---------------------------------------------------------------------------- +static inline void AT91F_TWI_EnableIt ( + AT91PS_TWI pTWI, // \arg pointer to a TWI controller + unsigned int flag) // \arg IT to be enabled +{ + //* Write to the IER register + pTWI->TWI_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TWI_DisableIt +//* \brief Disable TWI IT +//*---------------------------------------------------------------------------- +static inline void AT91F_TWI_DisableIt ( + AT91PS_TWI pTWI, // \arg pointer to a TWI controller + unsigned int flag) // \arg IT to be disabled +{ + //* Write to the IDR register + pTWI->TWI_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TWI_Configure +//* \brief Configure TWI in master mode +//*---------------------------------------------------------------------------- +static inline void AT91F_TWI_Configure ( AT91PS_TWI pTWI ) // \arg pointer to a TWI controller +{ + //* Disable interrupts + pTWI->TWI_IDR = (unsigned int) -1; + + //* Reset peripheral + pTWI->TWI_CR = AT91C_TWI_SWRST; + + //* Set Master mode + pTWI->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS; + +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TWI_GetInterruptMaskStatus +//* \brief Return TWI Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_TWI_GetInterruptMaskStatus( // \return TWI Interrupt Mask Status + AT91PS_TWI pTwi) // \arg pointer to a TWI controller +{ + return pTwi->TWI_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TWI_IsInterruptMasked +//* \brief Test if TWI Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_TWI_IsInterruptMasked( + AT91PS_TWI pTwi, // \arg pointer to a TWI controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_TWI_GetInterruptMaskStatus(pTwi) & flag); +} + +/* ***************************************************************************** + SOFTWARE API FOR USART + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_Baudrate +//* \brief Calculate the baudrate +//* Standard Asynchronous Mode : 8 bits , 1 stop , no parity +#define AT91C_US_ASYNC_MODE ( AT91C_US_USMODE_NORMAL + \ + AT91C_US_NBSTOP_1_BIT + \ + AT91C_US_PAR_NONE + \ + AT91C_US_CHRL_8_BITS + \ + AT91C_US_CLKS_CLOCK ) + +//* Standard External Asynchronous Mode : 8 bits , 1 stop , no parity +#define AT91C_US_ASYNC_SCK_MODE ( AT91C_US_USMODE_NORMAL + \ + AT91C_US_NBSTOP_1_BIT + \ + AT91C_US_PAR_NONE + \ + AT91C_US_CHRL_8_BITS + \ + AT91C_US_CLKS_EXT ) + +//* Standard Synchronous Mode : 8 bits , 1 stop , no parity +#define AT91C_US_SYNC_MODE ( AT91C_US_SYNC + \ + AT91C_US_USMODE_NORMAL + \ + AT91C_US_NBSTOP_1_BIT + \ + AT91C_US_PAR_NONE + \ + AT91C_US_CHRL_8_BITS + \ + AT91C_US_CLKS_CLOCK ) + +//* SCK used Label +#define AT91C_US_SCK_USED (AT91C_US_CKLO | AT91C_US_CLKS_EXT) + +//* Standard ISO T=0 Mode : 8 bits , 1 stop , parity +#define AT91C_US_ISO_READER_MODE ( AT91C_US_USMODE_ISO7816_0 + \ + AT91C_US_CLKS_CLOCK +\ + AT91C_US_NBSTOP_1_BIT + \ + AT91C_US_PAR_EVEN + \ + AT91C_US_CHRL_8_BITS + \ + AT91C_US_CKLO +\ + AT91C_US_OVER) + +//* Standard IRDA mode +#define AT91C_US_ASYNC_IRDA_MODE ( AT91C_US_USMODE_IRDA + \ + AT91C_US_NBSTOP_1_BIT + \ + AT91C_US_PAR_NONE + \ + AT91C_US_CHRL_8_BITS + \ + AT91C_US_CLKS_CLOCK ) + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_Baudrate +//* \brief Caluculate baud_value according to the main clock and the baud rate +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_US_Baudrate ( + const unsigned int main_clock, // \arg peripheral clock + const unsigned int baud_rate) // \arg UART baudrate +{ + unsigned int baud_value = ((main_clock*10)/(baud_rate * 16)); + if ((baud_value % 10) >= 5) + baud_value = (baud_value / 10) + 1; + else + baud_value /= 10; + return baud_value; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_SetBaudrate +//* \brief Set the baudrate according to the CPU clock +//*---------------------------------------------------------------------------- +static inline void AT91F_US_SetBaudrate ( + AT91PS_USART pUSART, // \arg pointer to a USART controller + unsigned int mainClock, // \arg peripheral clock + unsigned int speed) // \arg UART baudrate +{ + //* Define the baud rate divisor register + pUSART->US_BRGR = AT91F_US_Baudrate(mainClock, speed); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_SetTimeguard +//* \brief Set USART timeguard +//*---------------------------------------------------------------------------- +static inline void AT91F_US_SetTimeguard ( + AT91PS_USART pUSART, // \arg pointer to a USART controller + unsigned int timeguard) // \arg timeguard value +{ + //* Write the Timeguard Register + pUSART->US_TTGR = timeguard ; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_EnableIt +//* \brief Enable USART IT +//*---------------------------------------------------------------------------- +static inline void AT91F_US_EnableIt ( + AT91PS_USART pUSART, // \arg pointer to a USART controller + unsigned int flag) // \arg IT to be enabled +{ + //* Write to the IER register + pUSART->US_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_DisableIt +//* \brief Disable USART IT +//*---------------------------------------------------------------------------- +static inline void AT91F_US_DisableIt ( + AT91PS_USART pUSART, // \arg pointer to a USART controller + unsigned int flag) // \arg IT to be disabled +{ + //* Write to the IER register + pUSART->US_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_Configure +//* \brief Configure USART +//*---------------------------------------------------------------------------- +static inline void AT91F_US_Configure ( + AT91PS_USART pUSART, // \arg pointer to a USART controller + unsigned int mainClock, // \arg peripheral clock + unsigned int mode , // \arg mode Register to be programmed + unsigned int baudRate , // \arg baudrate to be programmed + unsigned int timeguard ) // \arg timeguard to be programmed +{ + //* Disable interrupts + pUSART->US_IDR = (unsigned int) -1; + + //* Reset receiver and transmitter + pUSART->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RXDIS | AT91C_US_TXDIS ; + + //* Define the baud rate divisor register + AT91F_US_SetBaudrate(pUSART, mainClock, baudRate); + + //* Write the Timeguard Register + AT91F_US_SetTimeguard(pUSART, timeguard); + + //* Clear Transmit and Receive Counters + AT91F_PDC_Open((AT91PS_PDC) &(pUSART->US_RPR)); + + //* Define the USART mode + pUSART->US_MR = mode ; + +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_EnableRx +//* \brief Enable receiving characters +//*---------------------------------------------------------------------------- +static inline void AT91F_US_EnableRx ( + AT91PS_USART pUSART) // \arg pointer to a USART controller +{ + //* Enable receiver + pUSART->US_CR = AT91C_US_RXEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_EnableTx +//* \brief Enable sending characters +//*---------------------------------------------------------------------------- +static inline void AT91F_US_EnableTx ( + AT91PS_USART pUSART) // \arg pointer to a USART controller +{ + //* Enable transmitter + pUSART->US_CR = AT91C_US_TXEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_ResetRx +//* \brief Reset Receiver and re-enable it +//*---------------------------------------------------------------------------- +static inline void AT91F_US_ResetRx ( + AT91PS_USART pUSART) // \arg pointer to a USART controller +{ + //* Reset receiver + pUSART->US_CR = AT91C_US_RSTRX; + //* Re-Enable receiver + pUSART->US_CR = AT91C_US_RXEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_ResetTx +//* \brief Reset Transmitter and re-enable it +//*---------------------------------------------------------------------------- +static inline void AT91F_US_ResetTx ( + AT91PS_USART pUSART) // \arg pointer to a USART controller +{ + //* Reset transmitter + pUSART->US_CR = AT91C_US_RSTTX; + //* Enable transmitter + pUSART->US_CR = AT91C_US_TXEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_DisableRx +//* \brief Disable Receiver +//*---------------------------------------------------------------------------- +static inline void AT91F_US_DisableRx ( + AT91PS_USART pUSART) // \arg pointer to a USART controller +{ + //* Disable receiver + pUSART->US_CR = AT91C_US_RXDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_DisableTx +//* \brief Disable Transmitter +//*---------------------------------------------------------------------------- +static inline void AT91F_US_DisableTx ( + AT91PS_USART pUSART) // \arg pointer to a USART controller +{ + //* Disable transmitter + pUSART->US_CR = AT91C_US_TXDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_Close +//* \brief Close USART: disable IT disable receiver and transmitter, close PDC +//*---------------------------------------------------------------------------- +static inline void AT91F_US_Close ( + AT91PS_USART pUSART) // \arg pointer to a USART controller +{ + //* Reset the baud rate divisor register + pUSART->US_BRGR = 0 ; + + //* Reset the USART mode + pUSART->US_MR = 0 ; + + //* Reset the Timeguard Register + pUSART->US_TTGR = 0; + + //* Disable all interrupts + pUSART->US_IDR = 0xFFFFFFFF ; + + //* Abort the Peripheral Data Transfers + AT91F_PDC_Close((AT91PS_PDC) &(pUSART->US_RPR)); + + //* Disable receiver and transmitter and stop any activity immediately + pUSART->US_CR = AT91C_US_TXDIS | AT91C_US_RXDIS | AT91C_US_RSTTX | AT91C_US_RSTRX ; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_TxReady +//* \brief Return 1 if a character can be written in US_THR +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_US_TxReady ( + AT91PS_USART pUSART ) // \arg pointer to a USART controller +{ + return (pUSART->US_CSR & AT91C_US_TXRDY); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_RxReady +//* \brief Return 1 if a character can be read in US_RHR +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_US_RxReady ( + AT91PS_USART pUSART ) // \arg pointer to a USART controller +{ + return (pUSART->US_CSR & AT91C_US_RXRDY); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_Error +//* \brief Return the error flag +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_US_Error ( + AT91PS_USART pUSART ) // \arg pointer to a USART controller +{ + return (pUSART->US_CSR & + (AT91C_US_OVRE | // Overrun error + AT91C_US_FRAME | // Framing error + AT91C_US_PARE)); // Parity error +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_PutChar +//* \brief Send a character,does not check if ready to send +//*---------------------------------------------------------------------------- +static inline void AT91F_US_PutChar ( + AT91PS_USART pUSART, + int character ) +{ + pUSART->US_THR = (character & 0x1FF); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_GetChar +//* \brief Receive a character,does not check if a character is available +//*---------------------------------------------------------------------------- +static inline int AT91F_US_GetChar ( + const AT91PS_USART pUSART) +{ + return((pUSART->US_RHR) & 0x1FF); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_SendFrame +//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_US_SendFrame( + AT91PS_USART pUSART, + char *pBuffer, + unsigned int szBuffer, + char *pNextBuffer, + unsigned int szNextBuffer ) +{ + return AT91F_PDC_SendFrame( + (AT91PS_PDC) &(pUSART->US_RPR), + pBuffer, + szBuffer, + pNextBuffer, + szNextBuffer); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_ReceiveFrame +//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_US_ReceiveFrame ( + AT91PS_USART pUSART, + char *pBuffer, + unsigned int szBuffer, + char *pNextBuffer, + unsigned int szNextBuffer ) +{ + return AT91F_PDC_ReceiveFrame( + (AT91PS_PDC) &(pUSART->US_RPR), + pBuffer, + szBuffer, + pNextBuffer, + szNextBuffer); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US_SetIrdaFilter +//* \brief Set the value of IrDa filter tregister +//*---------------------------------------------------------------------------- +static inline void AT91F_US_SetIrdaFilter ( + AT91PS_USART pUSART, + unsigned char value +) +{ + pUSART->US_IF = value; +} + +/* ***************************************************************************** + SOFTWARE API FOR MCI + ***************************************************************************** */ +//* Classic MCI Mode Register Configuration with PDC mode enabled and MCK = MCI Clock +#define AT91C_MCI_MR_PDCMODE (AT91C_MCI_CLKDIV |\ + AT91C_MCI_PWSDIV |\ + (AT91C_MCI_PWSDIV<<1) |\ + AT91C_MCI_PDCMODE) + +//* Classic MCI Data Timeout Register Configuration with 1048576 MCK cycles between 2 data transfer +#define AT91C_MCI_DTOR_1MEGA_CYCLES (AT91C_MCI_DTOCYC | AT91C_MCI_DTOMUL) + +//* Classic MCI SDCard Register Configuration with 1-bit data bus on slot A +#define AT91C_MCI_MMC_SLOTA (AT91C_MCI_SCDSEL & 0x0) + +//* Classic MCI SDCard Register Configuration with 1-bit data bus on slot B +#define AT91C_MCI_MMC_SLOTB (AT91C_MCI_SCDSEL) + +//* Classic MCI SDCard Register Configuration with 4-bit data bus on slot A +#define AT91C_MCI_SDCARD_4BITS_SLOTA ( (AT91C_MCI_SCDSEL & 0x0) | AT91C_MCI_SCDBUS ) + +//* Classic MCI SDCard Register Configuration with 4-bit data bus on slot B +#define AT91C_MCI_SDCARD_4BITS_SLOTB (AT91C_MCI_SCDSEL | AT91C_MCI_SCDBUS) + + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_Configure +//* \brief Configure the MCI +//*---------------------------------------------------------------------------- +static inline void AT91F_MCI_Configure ( + AT91PS_MCI pMCI, // \arg pointer to a MCI controller + unsigned int DTOR_register, // \arg Data Timeout Register to be programmed + unsigned int MR_register, // \arg Mode Register to be programmed + unsigned int SDCR_register) // \arg SDCard Register to be programmed +{ + //* Reset the MCI + pMCI->MCI_CR = AT91C_MCI_MCIEN | AT91C_MCI_PWSEN; + + //* Disable all the interrupts + pMCI->MCI_IDR = 0xFFFFFFFF; + + //* Set the Data Timeout Register + pMCI->MCI_DTOR = DTOR_register; + + //* Set the Mode Register + pMCI->MCI_MR = MR_register; + + //* Set the SDCard Register + pMCI->MCI_SDCR = SDCR_register; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_EnableIt +//* \brief Enable MCI IT +//*---------------------------------------------------------------------------- +static inline void AT91F_MCI_EnableIt ( + AT91PS_MCI pMCI, // \arg pointer to a MCI controller + unsigned int flag) // \arg IT to be enabled +{ + //* Write to the IER register + pMCI->MCI_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_DisableIt +//* \brief Disable MCI IT +//*---------------------------------------------------------------------------- +static inline void AT91F_MCI_DisableIt ( + AT91PS_MCI pMCI, // \arg pointer to a MCI controller + unsigned int flag) // \arg IT to be disabled +{ + //* Write to the IDR register + pMCI->MCI_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_Enable_Interface +//* \brief Enable the MCI Interface +//*---------------------------------------------------------------------------- +static inline void AT91F_MCI_Enable_Interface ( + AT91PS_MCI pMCI) // \arg pointer to a MCI controller +{ + //* Enable the MCI + pMCI->MCI_CR = AT91C_MCI_MCIEN; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_Disable_Interface +//* \brief Disable the MCI Interface +//*---------------------------------------------------------------------------- +static inline void AT91F_MCI_Disable_Interface ( + AT91PS_MCI pMCI) // \arg pointer to a MCI controller +{ + //* Disable the MCI + pMCI->MCI_CR = AT91C_MCI_MCIDIS; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_Cfg_ModeRegister +//* \brief Configure the MCI Mode Register +//*---------------------------------------------------------------------------- +static inline void AT91F_MCI_Cfg_ModeRegister ( + AT91PS_MCI pMCI, // \arg pointer to a MCI controller + unsigned int mode_register) // \arg value to set in the mode register +{ + //* Configure the MCI MR + pMCI->MCI_MR = mode_register; +} +/* ***************************************************************************** + SOFTWARE API FOR AIC + ***************************************************************************** */ +#define AT91C_AIC_BRANCH_OPCODE ((void (*) ()) 0xE51FFF20) // ldr, pc, [pc, #-&F20] + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_ConfigureIt +//* \brief Interrupt Handler Initialization +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_AIC_ConfigureIt ( + AT91PS_AIC pAic, // \arg pointer to the AIC registers + unsigned int irq_id, // \arg interrupt number to initialize + unsigned int priority, // \arg priority to give to the interrupt + unsigned int src_type, // \arg activation and sense of activation + void (*newHandler) (void) ) // \arg address of the interrupt handler +{ + unsigned int oldHandler; + unsigned int mask ; + + oldHandler = pAic->AIC_SVR[irq_id]; + + mask = 0x1 << irq_id ; + //* Disable the interrupt on the interrupt controller + pAic->AIC_IDCR = mask ; + //* Save the interrupt handler routine pointer and the interrupt priority + pAic->AIC_SVR[irq_id] = (unsigned int) newHandler ; + //* Store the Source Mode Register + pAic->AIC_SMR[irq_id] = src_type | priority ; + //* Clear the interrupt on the interrupt controller + pAic->AIC_ICCR = mask ; + + return oldHandler; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_EnableIt +//* \brief Enable corresponding IT number +//*---------------------------------------------------------------------------- +static inline void AT91F_AIC_EnableIt ( + AT91PS_AIC pAic, // \arg pointer to the AIC registers + unsigned int irq_id ) // \arg interrupt number to initialize +{ + //* Enable the interrupt on the interrupt controller + pAic->AIC_IECR = 0x1 << irq_id ; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_DisableIt +//* \brief Disable corresponding IT number +//*---------------------------------------------------------------------------- +static inline void AT91F_AIC_DisableIt ( + AT91PS_AIC pAic, // \arg pointer to the AIC registers + unsigned int irq_id ) // \arg interrupt number to initialize +{ + unsigned int mask = 0x1 << irq_id; + //* Disable the interrupt on the interrupt controller + pAic->AIC_IDCR = mask ; + //* Clear the interrupt on the Interrupt Controller ( if one is pending ) + pAic->AIC_ICCR = mask ; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_ClearIt +//* \brief Clear corresponding IT number +//*---------------------------------------------------------------------------- +static inline void AT91F_AIC_ClearIt ( + AT91PS_AIC pAic, // \arg pointer to the AIC registers + unsigned int irq_id) // \arg interrupt number to initialize +{ + //* Clear the interrupt on the Interrupt Controller ( if one is pending ) + pAic->AIC_ICCR = (0x1 << irq_id); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_AcknowledgeIt +//* \brief Acknowledge corresponding IT number +//*---------------------------------------------------------------------------- +static inline void AT91F_AIC_AcknowledgeIt ( + AT91PS_AIC pAic) // \arg pointer to the AIC registers +{ + pAic->AIC_EOICR = pAic->AIC_EOICR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_SetExceptionVector +//* \brief Configure vector handler +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_AIC_SetExceptionVector ( + unsigned int *pVector, // \arg pointer to the AIC registers + void (*Handler) () ) // \arg Interrupt Handler +{ + unsigned int oldVector = *pVector; + + if ((unsigned int) Handler == (unsigned int) AT91C_AIC_BRANCH_OPCODE) + *pVector = (unsigned int) AT91C_AIC_BRANCH_OPCODE; + else + *pVector = (((((unsigned int) Handler) - ((unsigned int) pVector) - 0x8) >> 2) & 0x00FFFFFF) | 0xEA000000; + + return oldVector; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_Trig +//* \brief Trig an IT +//*---------------------------------------------------------------------------- +static inline void AT91F_AIC_Trig ( + AT91PS_AIC pAic, // \arg pointer to the AIC registers + unsigned int irq_id) // \arg interrupt number +{ + pAic->AIC_ISCR = (0x1 << irq_id) ; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_IsActive +//* \brief Test if an IT is active +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_AIC_IsActive ( + AT91PS_AIC pAic, // \arg pointer to the AIC registers + unsigned int irq_id) // \arg Interrupt Number +{ + return (pAic->AIC_ISR & (0x1 << irq_id)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_IsPending +//* \brief Test if an IT is pending +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_AIC_IsPending ( + AT91PS_AIC pAic, // \arg pointer to the AIC registers + unsigned int irq_id) // \arg Interrupt Number +{ + return (pAic->AIC_IPR & (0x1 << irq_id)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_Open +//* \brief Set exception vectors and AIC registers to default values +//*---------------------------------------------------------------------------- +static inline void AT91F_AIC_Open( + AT91PS_AIC pAic, // \arg pointer to the AIC registers + void (*IrqHandler) (), // \arg Default IRQ vector exception + void (*FiqHandler) (), // \arg Default FIQ vector exception + void (*DefaultHandler) (), // \arg Default Handler set in ISR + void (*SpuriousHandler) (), // \arg Default Spurious Handler + unsigned int protectMode) // \arg Debug Control Register +{ + int i; + + // Disable all interrupts and set IVR to the default handler + for (i = 0; i < 32; ++i) { + AT91F_AIC_DisableIt(pAic, i); + AT91F_AIC_ConfigureIt(pAic, i, AT91C_AIC_PRIOR_LOWEST, AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, DefaultHandler); + } + + // Set the IRQ exception vector + AT91F_AIC_SetExceptionVector((unsigned int *) 0x18, IrqHandler); + // Set the Fast Interrupt exception vector + AT91F_AIC_SetExceptionVector((unsigned int *) 0x1C, FiqHandler); + + pAic->AIC_SPU = (unsigned int) SpuriousHandler; + pAic->AIC_DCR = protectMode; +} +/* ***************************************************************************** + SOFTWARE API FOR UDP + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EnableIt +//* \brief Enable UDP IT +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_EnableIt ( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned int flag) // \arg IT to be enabled +{ + //* Write to the IER register + pUDP->UDP_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_DisableIt +//* \brief Disable UDP IT +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_DisableIt ( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned int flag) // \arg IT to be disabled +{ + //* Write to the IDR register + pUDP->UDP_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_SetAddress +//* \brief Set UDP functional address +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_SetAddress ( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned char address) // \arg new UDP address +{ + pUDP->UDP_FADDR = (AT91C_UDP_FEN | address); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EnableEp +//* \brief Enable Endpoint +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_EnableEp ( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned int flag) // \arg endpoints to be enabled +{ + pUDP->UDP_GLBSTATE |= flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_DisableEp +//* \brief Enable Endpoint +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_DisableEp ( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned int flag) // \arg endpoints to be enabled +{ + pUDP->UDP_GLBSTATE &= ~(flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_SetState +//* \brief Set UDP Device state +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_SetState ( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned int flag) // \arg new UDP address +{ + pUDP->UDP_GLBSTATE &= ~(AT91C_UDP_FADDEN | AT91C_UDP_CONFG); + pUDP->UDP_GLBSTATE |= flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_GetState +//* \brief return UDP Device state +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_UDP_GetState ( // \return the UDP device state + AT91PS_UDP pUDP) // \arg pointer to a UDP controller +{ + return (pUDP->UDP_GLBSTATE & (AT91C_UDP_FADDEN | AT91C_UDP_CONFG)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_ResetEp +//* \brief Reset UDP endpoint +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_ResetEp ( // \return the UDP device state + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned int flag) // \arg Endpoints to be reset +{ + pUDP->UDP_RSTEP = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EpStall +//* \brief Endpoint will STALL requests +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_EpStall( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned char endpoint) // \arg endpoint number +{ + pUDP->UDP_CSR[endpoint] |= AT91C_UDP_FORCESTALL; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EpWrite +//* \brief Write value in the DPR +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_EpWrite( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned char endpoint, // \arg endpoint number + unsigned char value) // \arg value to be written in the DPR +{ + pUDP->UDP_FDR[endpoint] = value; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EpRead +//* \brief Return value from the DPR +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_UDP_EpRead( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned char endpoint) // \arg endpoint number +{ + return pUDP->UDP_FDR[endpoint]; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EpEndOfWr +//* \brief Notify the UDP that values in DPR are ready to be sent +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_EpEndOfWr( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned char endpoint) // \arg endpoint number +{ + pUDP->UDP_CSR[endpoint] |= AT91C_UDP_TXPKTRDY; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EpClear +//* \brief Clear flag in the endpoint CSR register +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_EpClear( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned char endpoint, // \arg endpoint number + unsigned int flag) // \arg flag to be cleared +{ + pUDP->UDP_CSR[endpoint] &= ~(flag); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EpSet +//* \brief Set flag in the endpoint CSR register +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_EpSet( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned char endpoint, // \arg endpoint number + unsigned int flag) // \arg flag to be cleared +{ + pUDP->UDP_CSR[endpoint] |= flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_EpStatus +//* \brief Return the endpoint CSR register +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_UDP_EpStatus( + AT91PS_UDP pUDP, // \arg pointer to a UDP controller + unsigned char endpoint) // \arg endpoint number +{ + return pUDP->UDP_CSR[endpoint]; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_GetInterruptMaskStatus +//* \brief Return UDP Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_UDP_GetInterruptMaskStatus( // \return UDP Interrupt Mask Status + AT91PS_UDP pUdp) // \arg pointer to a UDP controller +{ + return pUdp->UDP_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_IsInterruptMasked +//* \brief Test if UDP Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_UDP_IsInterruptMasked( + AT91PS_UDP pUdp, // \arg pointer to a UDP controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_UDP_GetInterruptMaskStatus(pUdp) & flag); +} + +/* ***************************************************************************** + SOFTWARE API FOR ST + ***************************************************************************** */ +//*---------------------------------------------------------------------------- +//* \fn AT91F_ST_SetPeriodInterval +//* \brief Set Periodic Interval Interrupt (period in ms) +//*---------------------------------------------------------------------------- +static inline void AT91F_ST_SetPeriodInterval( + AT91PS_ST pSt, + unsigned int period) +{ + volatile int status; + pSt->ST_IDR = AT91C_ST_PITS; /* Interrupt disable Register */ + + status = pSt->ST_SR; + pSt->ST_PIMR = period << 5; /* Period Interval Mode Register == timer interval = 1ms*/ +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_ST_EnableIt +//* \brief Enable system timer interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_ST_EnableIt( + AT91PS_ST pSt, + unsigned int flag) +{ + pSt->ST_IER = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_ST_DisableIt +//* \brief Disable system timer interrupt +//*---------------------------------------------------------------------------- +static inline void AT91F_ST_DisableIt( + AT91PS_ST pSt, + unsigned int flag) +{ + pSt->ST_IDR = flag; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_ST_GetInterruptMaskStatus +//* \brief Return ST Interrupt Mask Status +//*---------------------------------------------------------------------------- +static inline unsigned int AT91F_ST_GetInterruptMaskStatus( // \return ST Interrupt Mask Status + AT91PS_ST pSt) // \arg pointer to a ST controller +{ + return pSt->ST_IMR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_ST_IsInterruptMasked +//* \brief Test if ST Interrupt is Masked +//*---------------------------------------------------------------------------- +static inline int AT91F_ST_IsInterruptMasked( + AT91PS_ST pSt, // \arg pointer to a ST controller + unsigned int flag) // \arg flag to be tested +{ + return (AT91F_ST_GetInterruptMaskStatus(pSt) & flag); +} +//*---------------------------------------------------------------------------- +//* \fn AT91F_EBI_CfgPIO +//* \brief Configure PIO controllers to drive EBI signals +//*---------------------------------------------------------------------------- +static inline void AT91F_EBI_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOC, // PIO controller base address + ((unsigned int) AT91C_PC8_A24 ) | + ((unsigned int) AT91C_PC7_A23 ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_DBGU_CfgPMC +//* \brief Enable Peripheral clock in PMC for DBGU +//*---------------------------------------------------------------------------- +static inline void AT91F_DBGU_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SYS)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_DBGU_CfgPIO +//* \brief Configure PIO controllers to drive DBGU signals +//*---------------------------------------------------------------------------- +static inline void AT91F_DBGU_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOA, // PIO controller base address + ((unsigned int) AT91C_PA31_DTXD ) | + ((unsigned int) AT91C_PA30_DRXD ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SYS_CfgPMC +//* \brief Enable Peripheral clock in PMC for SYS +//*---------------------------------------------------------------------------- +static inline void AT91F_SYS_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SYS)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UHP_CfgPMC +//* \brief Enable Peripheral clock in PMC for UHP +//*---------------------------------------------------------------------------- +static inline void AT91F_UHP_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_UHP)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SDRC_CfgPIO +//* \brief Configure PIO controllers to drive SDRC signals +//*---------------------------------------------------------------------------- +static inline void AT91F_SDRC_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOC, // PIO controller base address + ((unsigned int) AT91C_PC20_D20 ) | + ((unsigned int) AT91C_PC21_D21 ) | + ((unsigned int) AT91C_PC30_D30 ) | + ((unsigned int) AT91C_PC22_D22 ) | + ((unsigned int) AT91C_PC31_D31 ) | + ((unsigned int) AT91C_PC23_D23 ) | + ((unsigned int) AT91C_PC16_D16 ) | + ((unsigned int) AT91C_PC24_D24 ) | + ((unsigned int) AT91C_PC17_D17 ) | + ((unsigned int) AT91C_PC25_D25 ) | + ((unsigned int) AT91C_PC18_D18 ) | + ((unsigned int) AT91C_PC26_D26 ) | + ((unsigned int) AT91C_PC19_D19 ) | + ((unsigned int) AT91C_PC27_D27 ) | + ((unsigned int) AT91C_PC28_D28 ) | + ((unsigned int) AT91C_PC29_D29 ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_EMAC_CfgPMC +//* \brief Enable Peripheral clock in PMC for EMAC +//*---------------------------------------------------------------------------- +static inline void AT91F_EMAC_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_EMAC)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_EMAC_CfgPIO +//* \brief Configure PIO controllers to drive EMAC signals +//*---------------------------------------------------------------------------- +static inline void AT91F_EMAC_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOA, // PIO controller base address + ((unsigned int) AT91C_PA14_ERXER ) | + ((unsigned int) AT91C_PA12_ERX0 ) | + ((unsigned int) AT91C_PA13_ERX1 ) | + ((unsigned int) AT91C_PA8_ETXEN ) | + ((unsigned int) AT91C_PA16_EMDIO ) | + ((unsigned int) AT91C_PA9_ETX0 ) | + ((unsigned int) AT91C_PA10_ETX1 ) | + ((unsigned int) AT91C_PA11_ECRS_ECRSDV) | + ((unsigned int) AT91C_PA15_EMDC ) | + ((unsigned int) AT91C_PA7_ETXCK_EREFCK), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_RTC_CfgPMC +//* \brief Enable Peripheral clock in PMC for RTC +//*---------------------------------------------------------------------------- +static inline void AT91F_RTC_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SYS)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC2_CfgPMC +//* \brief Enable Peripheral clock in PMC for SSC2 +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC2_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SSC2)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC2_CfgPIO +//* \brief Configure PIO controllers to drive SSC2 signals +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC2_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOB, // PIO controller base address + ((unsigned int) AT91C_PB12_TF2 ) | + ((unsigned int) AT91C_PB17_RF2 ) | + ((unsigned int) AT91C_PB13_TK2 ) | + ((unsigned int) AT91C_PB16_RK2 ) | + ((unsigned int) AT91C_PB14_TD2 ) | + ((unsigned int) AT91C_PB15_RD2 ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC1_CfgPMC +//* \brief Enable Peripheral clock in PMC for SSC1 +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC1_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SSC1)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC1_CfgPIO +//* \brief Configure PIO controllers to drive SSC1 signals +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC1_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOB, // PIO controller base address + ((unsigned int) AT91C_PB11_RF1 ) | + ((unsigned int) AT91C_PB10_RK1 ) | + ((unsigned int) AT91C_PB8_TD1 ) | + ((unsigned int) AT91C_PB9_RD1 ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SSC0_CfgPMC +//* \brief Enable Peripheral clock in PMC for SSC0 +//*---------------------------------------------------------------------------- +static inline void AT91F_SSC0_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SSC0)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_CfgPMC +//* \brief Enable Peripheral clock in PMC for SPI +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SPI)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SPI_CfgPIO +//* \brief Configure PIO controllers to drive SPI signals +//*---------------------------------------------------------------------------- +static inline void AT91F_SPI_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOA, // PIO controller base address + ((unsigned int) AT91C_PA3_NPCS0 ) | + ((unsigned int) AT91C_PA4_NPCS1 ) | + ((unsigned int) AT91C_PA1_MOSI ) | + ((unsigned int) AT91C_PA5_NPCS2 ) | + ((unsigned int) AT91C_PA6_NPCS3 ) | + ((unsigned int) AT91C_PA0_MISO ) | + ((unsigned int) AT91C_PA2_SPCK ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC5_CfgPMC +//* \brief Enable Peripheral clock in PMC for TC5 +//*---------------------------------------------------------------------------- +static inline void AT91F_TC5_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_TC5)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC4_CfgPMC +//* \brief Enable Peripheral clock in PMC for TC4 +//*---------------------------------------------------------------------------- +static inline void AT91F_TC4_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_TC4)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC3_CfgPMC +//* \brief Enable Peripheral clock in PMC for TC3 +//*---------------------------------------------------------------------------- +static inline void AT91F_TC3_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_TC3)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC2_CfgPMC +//* \brief Enable Peripheral clock in PMC for TC2 +//*---------------------------------------------------------------------------- +static inline void AT91F_TC2_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_TC2)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC1_CfgPMC +//* \brief Enable Peripheral clock in PMC for TC1 +//*---------------------------------------------------------------------------- +static inline void AT91F_TC1_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_TC1)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TC0_CfgPMC +//* \brief Enable Peripheral clock in PMC for TC0 +//*---------------------------------------------------------------------------- +static inline void AT91F_TC0_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_TC0)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_SMC2_CfgPIO +//* \brief Configure PIO controllers to drive SMC2 signals +//*---------------------------------------------------------------------------- +static inline void AT91F_SMC2_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOC, // PIO controller base address + ((unsigned int) AT91C_PC10_NCS4_CFCS) | + ((unsigned int) AT91C_PC9_A25_CFRNW) | + ((unsigned int) AT91C_PC12_NCS6_CFCE2) | + ((unsigned int) AT91C_PC11_NCS5_CFCE1), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PMC_CfgPMC +//* \brief Enable Peripheral clock in PMC for PMC +//*---------------------------------------------------------------------------- +static inline void AT91F_PMC_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SYS)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PMC_CfgPIO +//* \brief Configure PIO controllers to drive PMC signals +//*---------------------------------------------------------------------------- +static inline void AT91F_PMC_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOA, // PIO controller base address + 0, // Peripheral A + ((unsigned int) AT91C_PA24_PCK1 )); // Peripheral B + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOB, // PIO controller base address + ((unsigned int) AT91C_PB27_PCK0 ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIOD_CfgPMC +//* \brief Enable Peripheral clock in PMC for PIOD +//*---------------------------------------------------------------------------- +static inline void AT91F_PIOD_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_PIOD)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIOC_CfgPMC +//* \brief Enable Peripheral clock in PMC for PIOC +//*---------------------------------------------------------------------------- +static inline void AT91F_PIOC_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_PIOC)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIOB_CfgPMC +//* \brief Enable Peripheral clock in PMC for PIOB +//*---------------------------------------------------------------------------- +static inline void AT91F_PIOB_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_PIOB)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_PIOA_CfgPMC +//* \brief Enable Peripheral clock in PMC for PIOA +//*---------------------------------------------------------------------------- +static inline void AT91F_PIOA_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_PIOA)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TWI_CfgPMC +//* \brief Enable Peripheral clock in PMC for TWI +//*---------------------------------------------------------------------------- +static inline void AT91F_TWI_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_TWI)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_TWI_CfgPIO +//* \brief Configure PIO controllers to drive TWI signals +//*---------------------------------------------------------------------------- +static inline void AT91F_TWI_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOA, // PIO controller base address + ((unsigned int) AT91C_PA25_TWD ) | + ((unsigned int) AT91C_PA26_TWCK ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US3_CfgPMC +//* \brief Enable Peripheral clock in PMC for US3 +//*---------------------------------------------------------------------------- +static inline void AT91F_US3_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_US3)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US2_CfgPMC +//* \brief Enable Peripheral clock in PMC for US2 +//*---------------------------------------------------------------------------- +static inline void AT91F_US2_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_US2)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US2_CfgPIO +//* \brief Configure PIO controllers to drive US2 signals +//*---------------------------------------------------------------------------- +static inline void AT91F_US2_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOA, // PIO controller base address + ((unsigned int) AT91C_PA23_TXD2 ) | + ((unsigned int) AT91C_PA22_RXD2 ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US1_CfgPMC +//* \brief Enable Peripheral clock in PMC for US1 +//*---------------------------------------------------------------------------- +static inline void AT91F_US1_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_US1)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US1_CfgPIO +//* \brief Configure PIO controllers to drive US1 signals +//*---------------------------------------------------------------------------- +static inline void AT91F_US1_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOB, // PIO controller base address + ((unsigned int) AT91C_PB21_RXD1 ) | + ((unsigned int) AT91C_PB26_RTS1 ) | + ((unsigned int) AT91C_PB25_DSR1 ) | + ((unsigned int) AT91C_PB24_CTS1 ) | + ((unsigned int) AT91C_PB19_DTR1 ) | + ((unsigned int) AT91C_PB23_DCD1 ) | + ((unsigned int) AT91C_PB20_TXD1 ) | + ((unsigned int) AT91C_PB18_RI1 ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US0_CfgPMC +//* \brief Enable Peripheral clock in PMC for US0 +//*---------------------------------------------------------------------------- +static inline void AT91F_US0_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_US0)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_US0_CfgPIO +//* \brief Configure PIO controllers to drive US0 signals +//*---------------------------------------------------------------------------- +static inline void AT91F_US0_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOA, // PIO controller base address + ((unsigned int) AT91C_PA17_TXD0 ) | + ((unsigned int) AT91C_PA21_RTS0 ) | + ((unsigned int) AT91C_PA19_SCK0 ) | + ((unsigned int) AT91C_PA20_CTS0 ), // Peripheral A + 0); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_CfgPMC +//* \brief Enable Peripheral clock in PMC for MCI +//*---------------------------------------------------------------------------- +static inline void AT91F_MCI_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_MCI)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_CfgPIO +//* \brief Configure PIO controllers to drive MCI signals +//*---------------------------------------------------------------------------- +static inline void AT91F_MCI_CfgPIO (void) +{ + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOA, // PIO controller base address + ((unsigned int) AT91C_PA28_MCCDA ) | + ((unsigned int) AT91C_PA29_MCDA0 ) | + ((unsigned int) AT91C_PA27_MCCK ), // Peripheral A + 0); // Peripheral B + // Configure PIO controllers to periph mode + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOB, // PIO controller base address + 0, // Peripheral A + ((unsigned int) AT91C_PB5_MCDA3 ) | + ((unsigned int) AT91C_PB3_MCDA1 ) | + ((unsigned int) AT91C_PB4_MCDA2 )); // Peripheral B +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_AIC_CfgPMC +//* \brief Enable Peripheral clock in PMC for AIC +//*---------------------------------------------------------------------------- +static inline void AT91F_AIC_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_IRQ4) | + ((unsigned int) 1 << AT91C_ID_FIQ) | + ((unsigned int) 1 << AT91C_ID_IRQ5) | + ((unsigned int) 1 << AT91C_ID_IRQ6) | + ((unsigned int) 1 << AT91C_ID_IRQ0) | + ((unsigned int) 1 << AT91C_ID_IRQ1) | + ((unsigned int) 1 << AT91C_ID_IRQ2) | + ((unsigned int) 1 << AT91C_ID_IRQ3)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UDP_CfgPMC +//* \brief Enable Peripheral clock in PMC for UDP +//*---------------------------------------------------------------------------- +static inline void AT91F_UDP_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_UDP)); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_ST_CfgPMC +//* \brief Enable Peripheral clock in PMC for ST +//*---------------------------------------------------------------------------- +static inline void AT91F_ST_CfgPMC (void) +{ + AT91F_PMC_EnablePeriphClock( + AT91C_BASE_PMC, // PIO controller base address + ((unsigned int) 1 << AT91C_ID_SYS)); +} + +#endif // lib_AT91RM9200_H diff --git a/target/linux/at91/image/dfboot/src/init.c b/target/linux/at91/image/dfboot/src/init.c new file mode 100644 index 0000000..4088973 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/init.c @@ -0,0 +1,165 @@ +//*---------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - +//*---------------------------------------------------------------------------- +//* The software is delivered "AS IS" without warranty or condition of any +//* kind, either express, implied or statutory. This includes without +//* limitation any warranty or condition with respect to merchantability or +//* fitness for any particular purpose, or against the infringements of +//* intellectual property rights of others. +//*---------------------------------------------------------------------------- +//* File Name : init.c +//* Object : Low level initialisations written in C +//* Creation : HIi 10/10/2003 +//* +//*---------------------------------------------------------------------------- +#include "config.h" +#include "AT91RM9200.h" +#include "lib_AT91RM9200.h" +#include "stdio.h" + +//*---------------------------------------------------------------------------- +//* \fn AT91F_DataAbort +//* \brief This function reports an Abort +//*---------------------------------------------------------------------------- +static void AT91F_SpuriousHandler() +{ + puts("ISI"); + while (1); +} + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_DataAbort +//* \brief This function reports an Abort +//*---------------------------------------------------------------------------- +static void AT91F_DataAbort() +{ + puts("IDA"); + while (1); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_FetchAbort +//* \brief This function reports an Abort +//*---------------------------------------------------------------------------- +static void AT91F_FetchAbort() +{ + puts("IFA"); + while (1); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_UndefHandler +//* \brief This function reports that no handler have been set for current IT +//*---------------------------------------------------------------------------- +static void AT91F_UndefHandler() +{ + puts("IUD"); + while (1); +} + + +//*-------------------------------------------------------------------------------------- +//* Function Name : AT91F_InitSdram +//* Object : Initialize the SDRAM +//* Input Parameters : +//* Output Parameters : +//*-------------------------------------------------------------------------------------- +static void AT91F_InitSdram() +{ + int *pRegister; + + //* Configure PIOC as peripheral (D16/D31) + + AT91F_PIO_CfgPeriph( + AT91C_BASE_PIOC, // PIO controller base address + 0xFFFF0030, + 0 + ); + + //*Init SDRAM + pRegister = (int *)0xFFFFFF98; + *pRegister = 0x2188c155; + pRegister = (int *)0xFFFFFF90; + *pRegister = 0x2; + pRegister = (int *)0x20000000; + *pRegister = 0; + pRegister = (int *)0xFFFFFF90; + *pRegister = 0x4; + pRegister = (int *)0x20000000; + *pRegister = 0; + *pRegister = 0; + *pRegister = 0; + *pRegister = 0; + *pRegister = 0; + *pRegister = 0; + *pRegister = 0; + *pRegister = 0; + pRegister = (int *)0xFFFFFF90; + *pRegister = 0x3; + pRegister = (int *)0x20000080; + *pRegister = 0; + + pRegister = (int *)0xFFFFFF94; + *pRegister = 0x2e0; + pRegister = (int *)0x20000000; + *pRegister = 0; + + pRegister = (int *)0xFFFFFF90; + *pRegister = 0x00; + pRegister = (int *)0x20000000; + *pRegister = 0; +} + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_InitFlash +//* \brief This function performs low level HW initialization +//*---------------------------------------------------------------------------- +static void AT91F_InitMemories() +{ + int *pEbi = (int *)0xFFFFFF60; + + //* Setup MEMC to support all connected memories (CS0 = FLASH; CS1=SDRAM) + pEbi = (int *)0xFFFFFF60; + *pEbi = 0x00000002; + + //* CS0 cs for flash + pEbi = (int *)0xFFFFFF70; + *pEbi = 0x00003284; + + AT91F_InitSdram(); +} + + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_LowLevelInit +//* \brief This function performs very low level HW initialization +//*---------------------------------------------------------------------------- +void AT91F_LowLevelInit(void) +{ + int i; + + // Init Interrupt Controller + AT91F_AIC_Open( + AT91C_BASE_AIC, // pointer to the AIC registers + AT91C_AIC_BRANCH_OPCODE, // IRQ exception vector + AT91F_UndefHandler, // FIQ exception vector + AT91F_UndefHandler, // AIC default handler + AT91F_SpuriousHandler, // AIC spurious handler + 0); // Protect mode + + // Perform 8 End Of Interrupt Command to make sýre AIC will not Lock out nIRQ + for(i=0; i<8; i++) + AT91F_AIC_AcknowledgeIt(AT91C_BASE_AIC); + + AT91F_AIC_SetExceptionVector((unsigned int *)0x0C, AT91F_FetchAbort); + AT91F_AIC_SetExceptionVector((unsigned int *)0x10, AT91F_DataAbort); + AT91F_AIC_SetExceptionVector((unsigned int *)0x4, AT91F_UndefHandler); + + //Initialize SDRAM and Flash + AT91F_InitMemories(); + +} + diff --git a/target/linux/at91/image/dfboot/src/jump.S b/target/linux/at91/image/dfboot/src/jump.S new file mode 100644 index 0000000..cc69311 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/jump.S @@ -0,0 +1,4 @@ +.global Jump + +Jump: mov pc, r0 + diff --git a/target/linux/at91/image/dfboot/src/led.c b/target/linux/at91/image/dfboot/src/led.c new file mode 100644 index 0000000..40d4911 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/led.c @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2006 + * Atmel Nordic AB <www.atmel.com> + * Ulf Samuelsson <ulf@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <AT91RM9200.h> + +#define GREEN_LED AT91C_PIO_PB0 +#define YELLOW_LED AT91C_PIO_PB1 +#define RED_LED AT91C_PIO_PB2 + +void LED_set(unsigned int led) +{ + AT91PS_PIO PIOB = AT91C_BASE_PIOB; + PIOB->PIO_SODR = (led ^ 0x7) & 0x7; // All 0's => Set PIO high => OFF + PIOB->PIO_CODR = led & 0x7; // All 1's => Set PIO low => ON +} + +void green_LED_on(void) +{ + AT91PS_PIO PIOB = AT91C_BASE_PIOB; +// PIOB->PIO_CODR = GREEN_LED; + PIOB->PIO_CODR = (1 << 0); +} + +void yellow_LED_on(void) +{ + AT91PS_PIO PIOB = AT91C_BASE_PIOB; +// PIOB->PIO_CODR = YELLOW_LED; + PIOB->PIO_CODR = (1 << 1); +} + +void red_LED_on(void) +{ + AT91PS_PIO PIOB = AT91C_BASE_PIOB; +// PIOB->PIO_CODR = RED_LED; + PIOB->PIO_CODR = (1 << 2); +} + +void green_LED_off(void) +{ + AT91PS_PIO PIOB = AT91C_BASE_PIOB; +// PIOB->PIO_SODR = GREEN_LED; + PIOB->PIO_SODR = (1 << 0); +} + +void yellow_LED_off(void) +{ + AT91PS_PIO PIOB = AT91C_BASE_PIOB; +// PIOB->PIO_SODR = YELLOW_LED; + PIOB->PIO_SODR = (1 << 1); +} + +void red_LED_off(void) +{ + AT91PS_PIO PIOB = AT91C_BASE_PIOB; +// PIOB->PIO_SODR = RED_LED; + PIOB->PIO_SODR = (1 << 2); +} + +void LED_blink(unsigned int led) +{ + volatile int i,j; + for(i = 0; i < 5; i++) { + LED_set((1 << led)&0x7); + for(j= 0; j < 200000; j++); + LED_set(0); + for(j= 0; j < 200000; j++); + } +} + + +void LED_init (void) +{ + AT91PS_PIO PIOB = AT91C_BASE_PIOB; + AT91PS_PMC PMC = AT91C_BASE_PMC; + PMC->PMC_PCER = (1 << AT91C_ID_PIOB); // Enable PIOB clock + // Disable peripherals on LEDs + PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; + // Enable pins as outputs + PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; + // Turn all LEDs OFF + PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; +} diff --git a/target/linux/at91/image/dfboot/src/main.c b/target/linux/at91/image/dfboot/src/main.c new file mode 100644 index 0000000..c0705de --- /dev/null +++ b/target/linux/at91/image/dfboot/src/main.c @@ -0,0 +1,811 @@ +/*---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + *---------------------------------------------------------------------------- + * The software is delivered "AS IS" without warranty or condition of any + * kind, either express, implied or statutory. This includes without + * limitation any warranty or condition with respect to merchantability or + * fitness for any particular purpose, or against the infringements of + * intellectual property rights of others. + *---------------------------------------------------------------------------- + * File Name : main.c + * Object : + * Creation : HIi 10/10/2003 + * Modif : HIi 15/06/2004 : add crc32 to verify the download + * from dataflash + * : HIi 21/09/2004 : Set first PLLA to 180Mhz and MCK to + * 60Mhz to speed up dataflash boot (15Mhz) + * : MLC 12/04/2005 : Modify SetPLL() to avoid errata + * : USA 30/12/2005 : Change to page Size 1056 + * Change startaddress to C0008400 + * Change SPI Speed to ~4 Mhz + * Add retry on CRC Error + *---------------------------------------------------------------------------- + */ +#include "config.h" +#include "stdio.h" +#include "AT91RM9200.h" +#include "lib_AT91RM9200.h" +#include "com.h" +#include "main.h" +#include "dataflash.h" +#include "AT91C_MCI_Device.h" + +#define DEBUGOUT +#define XMODEM +#define MEMDISP + +#ifdef PAGESZ_1056 +#define PAGESIZE 1056 +#else +#define PAGESIZE 1024 +#endif + +#define AT91C_SDRAM_START 0x20000000 +#define AT91C_BOOT_ADDR 0x21F00000 +#define AT91C_BOOT_SIZE 128*PAGESIZE +#ifdef PAGESZ_1056 +#define AT91C_BOOT_DATAFLASH_ADDR 0xC0008400 +#else +#define AT91C_BOOT_DATAFLASH_ADDR 0xC0008000 +#endif +#define AT91C_PLLA_VALUE 0x237A3E5A // crystal= 18.432MHz - fixes BRG error at 115kbps +//#define AT91C_PLLA_VALUE 0x2026BE04 // crystal= 18.432MHz +//#define AT91C_PLLA_VALUE 0x202CBE01 // crystal= 4MHz + + + +#define DISP_LINE_LEN 16 + +// Reason for boot failure +#define IMAGE_BAD_SIZE 0 +#define IMAGE_READ_FAILURE 1 +#define IMAGE_CRC_ERROR 2 +#define IMAGE_ERROR 3 +#define SUCCESS -1 + +/* prototypes*/ +extern void AT91F_ST_ASM_HANDLER(void); +extern void Jump(unsigned int addr); + +const char *menu_dataflash[] = { +#ifdef XMODEM + "1: P DFboot\n", + "2: P U-Boot\n", +#endif + "3: P SDCard\n", +#ifdef PAGESZ_1056 + "4: R UBOOT\n", +#else + "4: R UBOOT\n", +#endif +#ifdef XMODEM + "5: P DF [addr]\n", +#endif + "6: RD DF [addr]\n", + "7: E DF\n" +}; +#ifdef XMODEM +#define MAXMENU 7 +#else +#define MAXMENU 4 +#endif + +char message[20]; +#ifdef XMODEM +volatile char XmodemComplete = 0; +#endif +unsigned int StTick = 0; + +AT91S_RomBoot const *pAT91; +#ifdef XMODEM +AT91S_SBuffer sXmBuffer; +AT91S_SvcXmodem svcXmodem; +AT91S_Pipe xmodemPipe; +#endif +AT91S_CtlTempo ctlTempo; + + +//*-------------------------------------------------------------------------------------- +//* Function Name : GetTickCount() +//* Object : Return the number of systimer tick +//* Input Parameters : +//* Output Parameters : +//*-------------------------------------------------------------------------------------- +unsigned int GetTickCount(void) +{ + return StTick; +} + +#ifdef XMODEM +//*-------------------------------------------------------------------------------------- +//* Function Name : AT91_XmodemComplete() +//* Object : Perform the remap and jump to appli in RAM +//* Input Parameters : +//* Output Parameters : +//*-------------------------------------------------------------------------------------- +static void AT91_XmodemComplete(AT91S_PipeStatus status, void *pVoid) +{ + /* stop the Xmodem tempo */ + svcXmodem.tempo.Stop(&(svcXmodem.tempo)); + XmodemComplete = 1; +} + + +//*-------------------------------------------------------------------------------------- +//* Function Name : AT91F_XmodemProtocol(AT91S_PipeStatus status, void *pVoid) +//* Object : Xmodem dispatcher +//* Input Parameters : +//* Output Parameters : +//*-------------------------------------------------------------------------------------- +static void XmodemProtocol(AT91S_PipeStatus status, void *pVoid) +{ + AT91PS_SBuffer pSBuffer = (AT91PS_SBuffer) xmodemPipe.pBuffer->pChild; + AT91PS_USART pUsart = svcXmodem.pUsart; + + if (pSBuffer->szRdBuffer == 0) { + /* Start a tempo to wait the Xmodem protocol complete */ + svcXmodem.tempo.Start(&(svcXmodem.tempo), 10, 0, AT91_XmodemComplete, pUsart); + } +} +#endif + +//*-------------------------------------------------------------------------------------- +//* Function Name : irq1_c_handler() +//* Object : C Interrupt handler for Interrutp source 1 +//* Input Parameters : none +//* Output Parameters : none +//*-------------------------------------------------------------------------------------- +void AT91F_ST_HANDLER(void) +{ + volatile unsigned int csr = *AT91C_DBGU_CSR; +#ifdef XMODEM + unsigned int error; +#endif + + if (AT91C_BASE_ST->ST_SR & 0x01) { + StTick++; + ctlTempo.CtlTempoTick(&ctlTempo); + return; + } + +#ifdef XMODEM + error = AT91F_US_Error((AT91PS_USART)AT91C_BASE_DBGU); + if (csr & error) { + /* Stop previous Xmodem transmition*/ + *(AT91C_DBGU_CR) = AT91C_US_RSTSTA; + AT91F_US_DisableIt((AT91PS_USART)AT91C_BASE_DBGU, AT91C_US_ENDRX); + AT91F_US_EnableIt((AT91PS_USART)AT91C_BASE_DBGU, AT91C_US_RXRDY); + + } + + else if (csr & (AT91C_US_TXRDY | AT91C_US_ENDTX | AT91C_US_TXEMPTY | + AT91C_US_RXRDY | AT91C_US_ENDRX | AT91C_US_TIMEOUT | + AT91C_US_RXBUFF)) { + if ( !(svcXmodem.eot) ) + svcXmodem.Handler(&svcXmodem, csr); + } +#endif +} + + +//*----------------------------------------------------------------------------- +//* Function Name : AT91F_DisplayMenu() +//* Object : +//* Input Parameters : +//* Return value : +//*----------------------------------------------------------------------------- +static int AT91F_DisplayMenu(void) +{ + int i, mci_present = 0; + printf("\nDF LOADER %s %s %s\n",AT91C_VERSION,__DATE__,__TIME__); + AT91F_DataflashPrintInfo(); + mci_present = AT91F_MCI_Init(); + for(i = 0; i < MAXMENU; i++) { + puts(menu_dataflash[i]); + } + return mci_present; +} + + +//*----------------------------------------------------------------------------- +//* Function Name : AsciiToHex() +//* Object : ascii to hexa conversion +//* Input Parameters : +//* Return value : +//*----------------------------------------------------------------------------- +static unsigned int AsciiToHex(char *s, unsigned int *val) +{ + int n; + + *val=0; + + if(s[0] == '0' && ((s[1] == 'x') || (s[1] == 'X'))) + s+=2; + n = 0; + while((n < 8) && (s[n] !=0)) + { + *val <<= 4; + if ( (s[n] >= '0') && (s[n] <='9')) + *val += (s[n] - '0'); + else + if ((s[n] >= 'a') && (s[n] <='f')) + *val += (s[n] - 0x57); + else + if ((s[n] >= 'A') && (s[n] <='F')) + *val += (s[n] - 0x37); + else + return 0; + n++; + } + + return 1; +} + + +#ifdef MEMDISP +//*----------------------------------------------------------------------------- +//* Function Name : AT91F_MemoryDisplay() +//* Object : Display the content of the dataflash +//* Input Parameters : +//* Return value : +//*----------------------------------------------------------------------------- +static int AT91F_MemoryDisplay(unsigned int addr, unsigned int length) +{ + unsigned long i, nbytes, linebytes; + char *cp; +// unsigned int *uip; +// unsigned short *usp; + unsigned char *ucp; + char linebuf[DISP_LINE_LEN]; + +// nbytes = length * size; + nbytes = length; + do + { +// uip = (unsigned int *)linebuf; +// usp = (unsigned short *)linebuf; + ucp = (unsigned char *)linebuf; + + printf("%08x:", addr); + linebytes = (nbytes > DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; + if((addr & 0xF0000000) == 0x20000000) { + for(i = 0; i < linebytes; i ++) { + linebuf[i] = *(char *)(addr+i); + } + } else { + read_dataflash(addr, linebytes, linebuf); + } + for (i=0; i<linebytes; i++) + { +/* if (size == 4) + printf(" %08x", *uip++); + else if (size == 2) + printf(" %04x", *usp++); + else +*/ + printf(" %02x", *ucp++); +// addr += size; + addr++; + } + printf(" "); + cp = linebuf; + for (i=0; i<linebytes; i++) { + if ((*cp < 0x20) || (*cp > 0x7e)) + printf("."); + else + printf("%c", *cp); + cp++; + } + printf("\n"); + nbytes -= linebytes; + } while (nbytes > 0); + return 0; +} +#endif + +//*-------------------------------------------------------------------------------------- +//* Function Name : AT91F_SetPLL +//* Object : Set the PLLA to 180Mhz and Master clock to 60 Mhz +//* Input Parameters : +//* Output Parameters : +//*-------------------------------------------------------------------------------------- +static unsigned int AT91F_SetPLL(void) +{ + AT91_REG tmp; + AT91PS_PMC pPmc = AT91C_BASE_PMC; + AT91PS_CKGR pCkgr = AT91C_BASE_CKGR; + + pPmc->PMC_IDR = 0xFFFFFFFF; + + /* -Setup the PLL A */ + pCkgr->CKGR_PLLAR = AT91C_PLLA_VALUE; + + while (!(*AT91C_PMC_SR & AT91C_PMC_LOCKA)); + + /* - Switch Master Clock from PLLB to PLLA/3 */ + tmp = pPmc->PMC_MCKR; + /* See Atmel Errata #27 and #28 */ + if (tmp & 0x0000001C) { + tmp = (tmp & ~0x0000001C); + pPmc->PMC_MCKR = tmp; + while (!(*AT91C_PMC_SR & AT91C_PMC_MCKRDY)); + } + if (tmp != 0x00000202) { + pPmc->PMC_MCKR = 0x00000202; + if ((tmp & 0x00000003) != 0x00000002) + while (!(*AT91C_PMC_SR & AT91C_PMC_MCKRDY)); + } + + return 1; +} + + +//*-------------------------------------------------------------------------------------- +//* Function Name : AT91F_ResetRegisters +//* Object : Restore the initial state to registers +//* Input Parameters : +//* Output Parameters : +//*-------------------------------------------------------------------------------------- +static unsigned int AT91F_ResetRegisters(void) +{ + volatile int i = 0; + + /* set the PIOs in input*/ + /* This disables the UART output, so dont execute for now*/ + +#ifndef DEBUGOUT + *AT91C_PIOA_ODR = 0xFFFFFFFF; /* Disables all the output pins */ + *AT91C_PIOA_PER = 0xFFFFFFFF; /* Enables the PIO to control all the pins */ +#endif + + AT91F_AIC_DisableIt (AT91C_BASE_AIC, AT91C_ID_SYS); + /* close all peripheral clocks */ + +#ifndef DEBUGOUT + AT91C_BASE_PMC->PMC_PCDR = 0xFFFFFFFC; +#endif + /* Disable core interrupts and set supervisor mode */ + __asm__ ("msr CPSR_c, #0xDF"); //* ARM_MODE_SYS(0x1F) | I_BIT(0x80) | F_BIT(0x40) + /* Clear all the interrupts */ + *AT91C_AIC_ICCR = 0xffffffff; + + /* read the AIC_IVR and AIC_FVR */ + i = *AT91C_AIC_IVR; + i = *AT91C_AIC_FVR; + + /* write the end of interrupt control register */ + *AT91C_AIC_EOICR = 0; + + return 1; +} + + +static int AT91F_LoadBoot(void) +{ +// volatile unsigned int crc1 = 0, crc2 = 0; + volatile unsigned int SizeToDownload = 0x21400; + volatile unsigned int AddressToDownload = AT91C_BOOT_ADDR; + +#if 0 + /* Read vector 6 to extract size to load */ + if (read_dataflash(AT91C_BOOT_DATAFLASH_ADDR, 32, + (char *)AddressToDownload) != AT91C_DATAFLASH_OK) + { + printf("Bad Code Size\n"); + return IMAGE_BAD_SIZE; + } + /* calculate the size to download */ + SizeToDownload = *(int *)(AddressToDownload + AT91C_OFFSET_VECT6); +#endif + +// printf("\nLoad UBOOT from dataflash[%x] to SDRAM[%x]\n", +// AT91C_BOOT_DATAFLASH_ADDR, AT91C_BOOT_ADDR); + if (read_dataflash(AT91C_BOOT_DATAFLASH_ADDR, SizeToDownload + 8, + (char *)AddressToDownload) != AT91C_DATAFLASH_OK) + { + printf("F DF RD\n"); + return IMAGE_READ_FAILURE; + } +#if 0 + pAT91->CRC32((const unsigned char *)AT91C_BOOT_ADDR, + (unsigned int)SizeToDownload , (unsigned int *)&crc2); + crc1 = (int)(*(char *)(AddressToDownload + SizeToDownload)) + + (int)(*(char *)(AddressToDownload + SizeToDownload + 1) << 8) + + (int)(*(char *)(AddressToDownload + SizeToDownload + 2) << 16) + + (int)(*(char *)(AddressToDownload + SizeToDownload + 3) << 24); + + /* Restore the value of Vector 6 */ + *(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = + *(int *)(AddressToDownload + SizeToDownload + 4); + + if (crc1 != crc2) { + printf("DF CRC bad %x != %x\n",crc1,crc2); + return IMAGE_CRC_ERROR; + } +#endif + return SUCCESS; +} + +static int AT91F_StartBoot(void) +{ + int sts; + if((sts = AT91F_LoadBoot()) != SUCCESS) return sts; +// printf("\n"); +// printf("PLLA[180MHz], MCK[60Mhz] ==> Start UBOOT\n"); + if (AT91F_ResetRegisters()) + { + printf("Jump"); + Jump(AT91C_BOOT_ADDR); +// LED_blink(0); + } + return IMAGE_ERROR; +} + +#if 0 +static void AT91F_RepeatedStartBoot(void) +{ + int i; + for(i = 0; i < CRC_RETRIES; i++) { + if(AT91F_StartBoot() != IMAGE_CRC_ERROR){ +// LED_blink(1); + return; + } + } + return; +} +#endif + +#define TRUE 1 +#define FALSE 0 +#define TRX_MAGIC 0x30524448 /* "HDR0" */ +#define TRX_VERSION 1 + +struct trx_header { + unsigned int magic; + unsigned int len; + unsigned int crc32; + unsigned int flag_version; + unsigned int offsets[3]; +}; + +#define AT91C_MCI_TIMEOUT 1000000 + +extern AT91S_MciDevice MCI_Device; +extern void AT91F_MCIDeviceWaitReady(unsigned int); +extern int AT91F_MCI_ReadBlockSwab(AT91PS_MciDevice, int, unsigned int *, int); + +int Program_From_MCI(void) +{ + int i; + unsigned int Max_Read_DataBlock_Length; + int block = 0; + int buffer = AT91C_DOWNLOAD_BASE_ADDRESS; + int bufpos = AT91C_DOWNLOAD_BASE_ADDRESS; + int NbPage = 0; + struct trx_header *p; + + p = (struct trx_header *)bufpos; + + Max_Read_DataBlock_Length = MCI_Device.pMCI_DeviceFeatures->Max_Read_DataBlock_Length; + + AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT); + + AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length); + + if (p->magic != TRX_MAGIC) { + printf("Inv IMG 0x%08x\n", p->magic); + return FALSE; + } + + printf("RDSD"); + AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC8 | AT91C_PIO_PC14; + for (i=0; i<(p->len/512); i++) { + AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length); + block++; + bufpos += Max_Read_DataBlock_Length; + } + + NbPage = 0; + i = dataflash_info[0].Device.pages_number; + while(i >>= 1) + NbPage++; + i = ((p->offsets[1] - p->offsets[0])/ 512) + 1 + (NbPage << 13) + (dataflash_info[0].Device.pages_size << 17); + *(int *)(buffer + p->offsets[0] + AT91C_OFFSET_VECT6) = i; + + printf(" WDFB"); + AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC14; + AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8; + write_dataflash(0xc0000000, buffer + p->offsets[0], p->offsets[1] - p->offsets[0]); + printf(" WUB"); + AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15; + AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8 | AT91C_PIO_PC14; + write_dataflash(0xc0008000, buffer + p->offsets[1], p->offsets[2] - p->offsets[1]); + printf(" WKRFS"); + AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC15; + AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC14; + write_dataflash(0xc0042000, buffer + p->offsets[2], p->len - p->offsets[2]); + AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC14; + AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC15; + return TRUE; +} + +//*---------------------------------------------------------------------------- +//* Function Name : main +//* Object : Main function +//* Input Parameters : none +//* Output Parameters : True +//*---------------------------------------------------------------------------- +int main(void) +{ +#ifdef XMODEM + AT91PS_Buffer pXmBuffer; + AT91PS_SvcComm pSvcXmodem; +#endif + AT91S_SvcTempo svcBootTempo; // Link to a AT91S_Tempo object + unsigned int ix; + volatile unsigned int AddressToDownload, SizeToDownload; + unsigned int DeviceAddress = 0; + char command = 0; +#ifdef XMODEM + volatile int i = 0; + unsigned int crc1 = 0, crc2 = 0; + volatile int device; + int NbPage; +#endif + volatile int Nb_Device = 0; + int mci_present = 0; + + pAT91 = AT91C_ROM_BOOT_ADDRESS; + + if (!AT91F_SetPLL()) + { + printf("F SetPLL"); + while(1); + } + + at91_init_uarts(); + + /* Tempo Initialisation */ + pAT91->OpenCtlTempo(&ctlTempo, (void *) &(pAT91->SYSTIMER_DESC)); + ctlTempo.CtlTempoStart((void *) &(pAT91->SYSTIMER_DESC)); + + // Attach the tempo to a tempo controler + ctlTempo.CtlTempoCreate(&ctlTempo, &svcBootTempo); +// LED_init(); +// LED_blink(2); + +#ifdef XMODEM + /* Xmodem Initialisation */ + pXmBuffer = pAT91->OpenSBuffer(&sXmBuffer); + pSvcXmodem = pAT91->OpenSvcXmodem(&svcXmodem, + (AT91PS_USART)AT91C_BASE_DBGU, &ctlTempo); + pAT91->OpenPipe(&xmodemPipe, pSvcXmodem, pXmBuffer); +#endif + + /* System Timer initialization */ + AT91F_AIC_ConfigureIt( + AT91C_BASE_AIC, // AIC base address + AT91C_ID_SYS, // System peripheral ID + AT91C_AIC_PRIOR_HIGHEST, // Max priority + AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, // Level sensitive + AT91F_ST_ASM_HANDLER + ); + /* Enable ST interrupt */ + AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_SYS); + +#ifndef PRODTEST + /* Start tempo to start Boot in a delay of + * AT91C_DELAY_TO_BOOT sec if no key pressed */ + svcBootTempo.Start(&svcBootTempo, AT91C_DELAY_TO_BOOT, + 0, AT91F_StartBoot, NULL); +#endif + + while(1) + { + while(command == 0) + { + AddressToDownload = AT91C_DOWNLOAD_BASE_ADDRESS; + SizeToDownload = AT91C_DOWNLOAD_MAX_SIZE; + DeviceAddress = 0; + + /* try to detect Dataflash */ + if (!Nb_Device) + Nb_Device = AT91F_DataflashInit(); + + mci_present = AT91F_DisplayMenu(); + +#ifdef PRODTEST + if (mci_present) { + if (Program_From_MCI()) + AT91F_StartBoot(); + } +#endif + + message[0] = 0; + AT91F_ReadLine ("Enter: ", message); + +#ifndef PRODTEST + /* stop tempo ==> stop autoboot */ + svcBootTempo.Stop(&svcBootTempo); +#endif + + command = message[0]; + for(ix = 1; (message[ix] == ' ') && (ix < 12); ix++); // Skip some whitespace + + if(!AsciiToHex(&message[ix], &DeviceAddress) ) + DeviceAddress = 0; // Illegal DeviceAddress + + switch(command) + { +#ifdef XMODEM + case '1': + case '2': + case '5': + if(command == '1') { + DeviceAddress = 0xC0000000; +// printf("Download DataflashBoot.bin to [0x%x]\n", DeviceAddress); + } else if(command == '2') { + DeviceAddress = AT91C_BOOT_DATAFLASH_ADDR; +// printf("Download u-boot.bin to [0x%x]\n", DeviceAddress); + } else { +// printf("Download Dataflash to [0x%x]\n", DeviceAddress); + } + switch(DeviceAddress & 0xFF000000) + { + case CFG_DATAFLASH_LOGIC_ADDR_CS0: + if (dataflash_info[0].id == 0){ + printf("No DF"); + AT91F_WaitKeyPressed(); + command = 0; + } + + device = 0; + break; + + case CFG_DATAFLASH_LOGIC_ADDR_CS3: + if (dataflash_info[1].id == 0){ + printf("No DF"); + AT91F_WaitKeyPressed(); + command = 0; + } + device = 1; + break; + + default: + command = 0; + break; + } + break; +#endif + + case '3': + if (mci_present) + Program_From_MCI(); + command = 0; + break; + + case '4': + AT91F_StartBoot(); + command = 0; + break; + +#ifdef MEMDISP + case '6': + do + { + AT91F_MemoryDisplay(DeviceAddress, 256); + AT91F_ReadLine (NULL, message); + DeviceAddress += 0x100; + } + while(message[0] == '\0'); + command = 0; + break; +#endif + + case '7': + switch(DeviceAddress & 0xFF000000) + { + case CFG_DATAFLASH_LOGIC_ADDR_CS0: + break; + case CFG_DATAFLASH_LOGIC_ADDR_CS3: + break; + default: + command = 0; + break; + } + + if (command != 0) { + AT91F_ReadLine ("RDY ERA\nSure?", + message); + if(message[0] == 'Y' || message[0] == 'y') { + erase_dataflash(DeviceAddress & 0xFF000000); +// printf("Erase complete\n\n"); + } +// else +// printf("Erase aborted\n"); + } + command = 0; + + break; + + default: + command = 0; + break; + } + } +#ifdef XMODEM + for(i = 0; i <= AT91C_DOWNLOAD_MAX_SIZE; i++) + *(unsigned char *)(AddressToDownload + i) = 0; + + xmodemPipe.Read(&xmodemPipe, (char *)AddressToDownload, + SizeToDownload, XmodemProtocol, 0); + while(XmodemComplete !=1); + SizeToDownload = (unsigned int)((svcXmodem.pData) - + (unsigned int)AddressToDownload); + + /* Modification of vector 6 */ + if ((DeviceAddress == CFG_DATAFLASH_LOGIC_ADDR_CS0)) { + // Vector 6 must be compliant to the BootRom description (ref Datasheet) + NbPage = 0; + i = dataflash_info[device].Device.pages_number; + while(i >>= 1) + NbPage++; + i = (SizeToDownload / 512)+1 + (NbPage << 13) + + (dataflash_info[device].Device.pages_size << 17); //+4 to add crc32 + SizeToDownload = 512 * (i &0xFF); + } + else + { + /* Save the contents of vector 6 ==> will be restored + * at boot time (AT91F_StartBoot) */ + *(int *)(AddressToDownload + SizeToDownload + 4) = + *(int *)(AddressToDownload + AT91C_OFFSET_VECT6); + /* Modify Vector 6 to contain the size of the + * file to copy (Dataflash -> SDRAM)*/ + i = SizeToDownload; + } + + *(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = i; +// printf("\nModification of Arm Vector 6 :%x\n", i); + +// printf("\nWrite %d bytes in DataFlash [0x%x]\n",SizeToDownload, DeviceAddress); + crc1 = 0; + pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc1); + + /* Add the crc32 at the end of the code */ + *(char *)(AddressToDownload + SizeToDownload) = (char)(crc1 & 0x000000FF); + *(char *)(AddressToDownload + SizeToDownload + 1) = (char)((crc1 & 0x0000FF00) >> 8); + *(char *)(AddressToDownload + SizeToDownload + 2) = (char)((crc1 & 0x00FF0000) >> 16); + *(char *)(AddressToDownload + SizeToDownload + 3) = (char)((crc1 & 0xFF000000) >> 24); + + /* write dataflash */ + write_dataflash (DeviceAddress, AddressToDownload, (SizeToDownload + 8)); + + /* clear the buffer before read */ + for(i=0; i <= SizeToDownload; i++) + *(unsigned char *)(AddressToDownload + i) = 0; + + /* Read dataflash to check the validity of the data */ + read_dataflash (DeviceAddress, (SizeToDownload + 4), (char *)(AddressToDownload)); + + printf("VFY: "); + crc2 = 0; + + pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc2); + crc1 = (int)(*(char *)(AddressToDownload + SizeToDownload)) + + (int)(*(char *)(AddressToDownload + SizeToDownload + 1) << 8) + + (int)(*(char *)(AddressToDownload + SizeToDownload + 2) << 16) + + (int)(*(char *)(AddressToDownload + SizeToDownload + 3) << 24); + + if (crc1 != crc2) + printf("ERR"); + else + printf("OK"); + + command = 0; + XmodemComplete = 0; + AT91F_WaitKeyPressed(); +#endif + } +} + diff --git a/target/linux/at91/image/dfboot/src/main.h b/target/linux/at91/image/dfboot/src/main.h new file mode 100644 index 0000000..a8cd325 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/main.h @@ -0,0 +1,43 @@ +//*---------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - +//*---------------------------------------------------------------------------- +//* The software is delivered "AS IS" without warranty or condition of any +//* kind, either express, implied or statutory. This includes without +//* limitation any warranty or condition with respect to merchantability or +//* fitness for any particular purpose, or against the infringements of +//* intellectual property rights of others. +//*---------------------------------------------------------------------------- +//* File Name : main.h +//* Object : +//* +//* 1.0 27/03/03 HIi : Creation +//* 1.01 03/05/04 HIi : AT9C_VERSION incremented to 1.01 +//* 1.02 15/06/04 HIi : AT9C_VERSION incremented to 1.02 ==> +//* Add crc32 to verify dataflash download +//* 1.03 18/04/05 MLC : AT91C_VERSION incremented to 1.03g +//* Repeat boot on CRC Failure +//* Change Page Size to 1056 +//* Reduce SPI speed to 4 Mbit +//* Change U-Boot boot address to a 1056 byte page boundary +//* 1.04 30/04/05 USA : AT91C_VERSION incremented to 1.04 +//* 1.05 07/08/06 USA : AT91C_VERSION incremented to 1.05 +//* Will only support loading Dataflashboot.bin and U-Boot +//*---------------------------------------------------------------------------- + +#ifndef main_h +#define main_h + +#include "embedded_services.h" + +#define AT91C_DOWNLOAD_BASE_ADDRESS 0x20000000 +#define AT91C_DOWNLOAD_MAX_SIZE 0x00040000 + +#define AT91C_OFFSET_VECT6 0x14 //* Offset for ARM vector 6 + +#define AT91C_VERSION "VER 1.05" + + +// Global variables and functions definition +extern unsigned int GetTickCount(void); +#endif + diff --git a/target/linux/at91/image/dfboot/src/mci_device.c b/target/linux/at91/image/dfboot/src/mci_device.c new file mode 100644 index 0000000..cce74a3 --- /dev/null +++ b/target/linux/at91/image/dfboot/src/mci_device.c @@ -0,0 +1,743 @@ +//*---------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - +//*---------------------------------------------------------------------------- +//* The software is delivered "AS IS" without warranty or condition of any +//* kind, either express, implied or statutory. This includes without +//* limitation any warranty or condition with respect to merchantability or +//* fitness for any particular purpose, or against the infringements of +//* intellectual property rights of others. +//*---------------------------------------------------------------------------- +//* File Name : mci_device.c +//* Object : TEST DataFlash Functions +//* Creation : FB 26/11/2002 +//* +//*---------------------------------------------------------------------------- + +#include <AT91C_MCI_Device.h> +#include "stdio.h" + +#define AT91C_MCI_TIMEOUT 1000000 /* For AT91F_MCIDeviceWaitReady */ +#define BUFFER_SIZE_MCI_DEVICE 512 +#define MASTER_CLOCK 60000000 +#define FALSE 0 +#define TRUE 1 + +//* External Functions +extern void AT91F_ASM_MCI_Handler(void); +//* Global Variables +AT91S_MciDeviceFeatures MCI_Device_Features; +AT91S_MciDeviceDesc MCI_Device_Desc; +AT91S_MciDevice MCI_Device; + +#undef ENABLE_WRITE +#undef MMC + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_SendCommand +//* \brief Generic function to send a command to the MMC or SDCard +//*---------------------------------------------------------------------------- +int AT91F_MCI_SendCommand ( + AT91PS_MciDevice pMCI_Device, + unsigned int Cmd, + unsigned int Arg) +{ + unsigned int error,status; + //unsigned int tick=0; + + // Send the command + AT91C_BASE_MCI->MCI_ARGR = Arg; + AT91C_BASE_MCI->MCI_CMDR = Cmd; + + // wait for CMDRDY Status flag to read the response + do + { + status = AT91C_BASE_MCI->MCI_SR; + //tick++; + } + while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) ); + + // Test error ==> if crc error and response R3 ==> don't check error + error = (AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR; + if(error != 0 ) + { + // if the command is SEND_OP_COND the CRC error flag is always present (cf : R3 response) + if ( (Cmd != AT91C_SDCARD_APP_OP_COND_CMD) && (Cmd != AT91C_MMC_SEND_OP_COND_CMD) ) + return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); + else + { + if (error != AT91C_MCI_RCRCE) + return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); + } + } + return AT91C_CMD_SEND_OK; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_SDCard_SendAppCommand +//* \brief Specific function to send a specific command to the SDCard +//*---------------------------------------------------------------------------- +int AT91F_MCI_SDCard_SendAppCommand ( + AT91PS_MciDevice pMCI_Device, + unsigned int Cmd_App, + unsigned int Arg ) +{ + unsigned int status; + //unsigned int tick=0; + + // Send the CMD55 for application specific command + AT91C_BASE_MCI->MCI_ARGR = (pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address << 16 ); + AT91C_BASE_MCI->MCI_CMDR = AT91C_APP_CMD; + + // wait for CMDRDY Status flag to read the response + do + { + status = AT91C_BASE_MCI->MCI_SR; + //tick++; + } + while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) ); + + // if an error occurs + if (((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR) != 0 ) + return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); + + // check if it is a specific command and then send the command + if ( (Cmd_App && AT91C_SDCARD_APP_ALL_CMD) == 0) + return AT91C_CMD_SEND_ERROR; + + return( AT91F_MCI_SendCommand(pMCI_Device,Cmd_App,Arg) ); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_GetStatus +//* \brief Addressed card sends its status register +//*---------------------------------------------------------------------------- +int AT91F_MCI_GetStatus(AT91PS_MciDevice pMCI_Device,unsigned int relative_card_address) +{ + if (AT91F_MCI_SendCommand(pMCI_Device, + AT91C_SEND_STATUS_CMD, + relative_card_address <<16) == AT91C_CMD_SEND_OK) + return (AT91C_BASE_MCI->MCI_RSPR[0]); + + return AT91C_CMD_SEND_ERROR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_Device_Handler +//* \brief MCI C interrupt handler +//*---------------------------------------------------------------------------- +void AT91F_MCI_Device_Handler( + AT91PS_MciDevice pMCI_Device, + unsigned int status) +{ + // If End of Tx Buffer Empty interrupt occurred + if ( status & AT91C_MCI_TXBUFE ) + { + AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_TXBUFE; + AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTDIS; + + pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE; + } // End of if AT91C_MCI_TXBUFF + + // If End of Rx Buffer Full interrupt occurred + if ( status & AT91C_MCI_RXBUFF ) + { + AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_RXBUFF; + AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTDIS; + + pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE; + } // End of if AT91C_MCI_RXBUFF + +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_Handler +//* \brief MCI Handler +//*---------------------------------------------------------------------------- +void AT91F_MCI_Handler(void) +{ + int status; + + status = ( AT91C_BASE_MCI->MCI_SR & AT91C_BASE_MCI->MCI_IMR ); + + AT91F_MCI_Device_Handler(&MCI_Device,status); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_ReadBlock +//* \brief Read an ENTIRE block or PARTIAL block +//*---------------------------------------------------------------------------- +int AT91F_MCI_ReadBlock( + AT91PS_MciDevice pMCI_Device, + int src, + unsigned int *dataBuffer, + int sizeToRead ) +{ + //////////////////////////////////////////////////////////////////////////////////////////// + if(pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE) + return AT91C_READ_ERROR; + + if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA) + return AT91C_READ_ERROR; + + if ( (src + sizeToRead) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity ) + return AT91C_READ_ERROR; + + // If source does not fit a begin of a block + if ( (src % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 ) + return AT91C_READ_ERROR; + + // Test if the MMC supports Partial Read Block + // ALWAYS SUPPORTED IN SD Memory Card + if( (sizeToRead < pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) + && (pMCI_Device->pMCI_DeviceFeatures->Read_Partial == 0x00) ) + return AT91C_READ_ERROR; + + if( sizeToRead > pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) + return AT91C_READ_ERROR; + //////////////////////////////////////////////////////////////////////////////////////////// + + // Init Mode Register + AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length << 16) | AT91C_MCI_PDCMODE); + + if (sizeToRead %4) + sizeToRead = (sizeToRead /4)+1; + else + sizeToRead = sizeToRead/4; + + AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS); + AT91C_BASE_PDC_MCI->PDC_RPR = (unsigned int)dataBuffer; + AT91C_BASE_PDC_MCI->PDC_RCR = sizeToRead; + + // Send the Read single block command + if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_READ_SINGLE_BLOCK_CMD, src) != AT91C_CMD_SEND_OK ) + return AT91C_READ_ERROR; + + pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_RX_SINGLE_BLOCK; + + // Enable AT91C_MCI_RXBUFF Interrupt + AT91C_BASE_MCI->MCI_IER = AT91C_MCI_RXBUFF; + + // (PDC) Receiver Transfer Enable + AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTEN; + + return AT91C_READ_OK; +} + + +#ifdef ENABLE_WRITE +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_WriteBlock +//* \brief Write an ENTIRE block but not always PARTIAL block !!! +//*---------------------------------------------------------------------------- +int AT91F_MCI_WriteBlock( + AT91PS_MciDevice pMCI_Device, + int dest, + unsigned int *dataBuffer, + int sizeToWrite ) +{ + //////////////////////////////////////////////////////////////////////////////////////////// + if( pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE) + return AT91C_WRITE_ERROR; + + if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA) + return AT91C_WRITE_ERROR; + + if ( (dest + sizeToWrite) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity ) + return AT91C_WRITE_ERROR; + + // If source does not fit a begin of a block + if ( (dest % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 ) + return AT91C_WRITE_ERROR; + + // Test if the MMC supports Partial Write Block + if( (sizeToWrite < pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length) + && (pMCI_Device->pMCI_DeviceFeatures->Write_Partial == 0x00) ) + return AT91C_WRITE_ERROR; + + if( sizeToWrite > pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length ) + return AT91C_WRITE_ERROR; + //////////////////////////////////////////////////////////////////////////////////////////// + + // Init Mode Register + AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length << 16) | AT91C_MCI_PDCMODE); + + if (sizeToWrite %4) + sizeToWrite = (sizeToWrite /4)+1; + else + sizeToWrite = sizeToWrite/4; + + // Init PDC for write sequence + AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS); + AT91C_BASE_PDC_MCI->PDC_TPR = (unsigned int) dataBuffer; + AT91C_BASE_PDC_MCI->PDC_TCR = sizeToWrite; + + // Send the write single block command + if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_WRITE_BLOCK_CMD, dest) != AT91C_CMD_SEND_OK) + return AT91C_WRITE_ERROR; + + pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_TX_SINGLE_BLOCK; + + // Enable AT91C_MCI_TXBUFE Interrupt + AT91C_BASE_MCI->MCI_IER = AT91C_MCI_TXBUFE; + + // Enables TX for PDC transfert requests + AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTEN; + + return AT91C_WRITE_OK; +} +#endif + +#ifdef MMC +//*------------------------------------------------------------------------------------------------------------ +//* \fn AT91F_MCI_MMC_SelectCard +//* \brief Toggles a card between the Stand_by and Transfer states or between Programming and Disconnect states +//*------------------------------------------------------------------------------------------------------------ +int AT91F_MCI_MMC_SelectCard(AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address) +{ + int status; + + //* Check if the MMC card chosen is already the selected one + status = AT91F_MCI_GetStatus(pMCI_Device,relative_card_address); + + if (status < 0) + return AT91C_CARD_SELECTED_ERROR; + + if ((status & AT91C_SR_CARD_SELECTED) == AT91C_SR_CARD_SELECTED) + return AT91C_CARD_SELECTED_OK; + + //* Search for the MMC Card to be selected, status = the Corresponding Device Number + status = 0; + while( (pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address != relative_card_address) + && (status < AT91C_MAX_MCI_CARDS) ) + status++; + + if (status > AT91C_MAX_MCI_CARDS) + return AT91C_CARD_SELECTED_ERROR; + + if (AT91F_MCI_SendCommand( pMCI_Device, + AT91C_SEL_DESEL_CARD_CMD, + pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address << 16) == AT91C_CMD_SEND_OK) + return AT91C_CARD_SELECTED_OK; + return AT91C_CARD_SELECTED_ERROR; +} +#endif + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_GetCSD +//* \brief Asks to the specified card to send its CSD +//*---------------------------------------------------------------------------- +int AT91F_MCI_GetCSD (AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address , unsigned int * response) +{ + + if(AT91F_MCI_SendCommand(pMCI_Device, + AT91C_SEND_CSD_CMD, + (relative_card_address << 16)) != AT91C_CMD_SEND_OK) + return AT91C_CMD_SEND_ERROR; + + response[0] = AT91C_BASE_MCI->MCI_RSPR[0]; + response[1] = AT91C_BASE_MCI->MCI_RSPR[1]; + response[2] = AT91C_BASE_MCI->MCI_RSPR[2]; + response[3] = AT91C_BASE_MCI->MCI_RSPR[3]; + + return AT91C_CMD_SEND_OK; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_SetBlocklength +//* \brief Select a block length for all following block commands (R/W) +//*---------------------------------------------------------------------------- +int AT91F_MCI_SetBlocklength(AT91PS_MciDevice pMCI_Device,unsigned int length) +{ + return( AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_BLOCKLEN_CMD, length) ); +} + +#ifdef MMC +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_MMC_GetAllOCR +//* \brief Asks to all cards to send their operations conditions +//*---------------------------------------------------------------------------- +int AT91F_MCI_MMC_GetAllOCR (AT91PS_MciDevice pMCI_Device) +{ + unsigned int response =0x0; + + while(1) + { + response = AT91F_MCI_SendCommand(pMCI_Device, + AT91C_MMC_SEND_OP_COND_CMD, + AT91C_MMC_HOST_VOLTAGE_RANGE); + if (response != AT91C_CMD_SEND_OK) + return AT91C_INIT_ERROR; + + response = AT91C_BASE_MCI->MCI_RSPR[0]; + + if ( (response & AT91C_CARD_POWER_UP_BUSY) == AT91C_CARD_POWER_UP_BUSY) + return(response); + } +} +#endif + +#ifdef MMC +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_MMC_GetAllCID +//* \brief Asks to the MMC on the chosen slot to send its CID +//*---------------------------------------------------------------------------- +int AT91F_MCI_MMC_GetAllCID (AT91PS_MciDevice pMCI_Device, unsigned int *response) +{ + int Nb_Cards_Found=-1; + + while(1) + { + if(AT91F_MCI_SendCommand(pMCI_Device, + AT91C_MMC_ALL_SEND_CID_CMD, + AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK) + return Nb_Cards_Found; + else + { + Nb_Cards_Found = 0; + //* Assignation of the relative address to the MMC CARD + pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Relative_Card_Address = Nb_Cards_Found + AT91C_FIRST_RCA; + //* Set the insert flag + pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Card_Inserted = AT91C_MMC_CARD_INSERTED; + + if (AT91F_MCI_SendCommand(pMCI_Device, + AT91C_MMC_SET_RELATIVE_ADDR_CMD, + (Nb_Cards_Found + AT91C_FIRST_RCA) << 16) != AT91C_CMD_SEND_OK) + return AT91C_CMD_SEND_ERROR; + + //* If no error during assignation address ==> Increment Nb_cards_Found + Nb_Cards_Found++ ; + } + } +} +#endif +#ifdef MMC +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_MMC_Init +//* \brief Return the MMC initialisation status +//*---------------------------------------------------------------------------- +int AT91F_MCI_MMC_Init (AT91PS_MciDevice pMCI_Device) +{ + unsigned int tab_response[4]; + unsigned int mult,blocknr; + unsigned int i,Nb_Cards_Found=0; + + //* Resets all MMC Cards in Idle state + AT91F_MCI_SendCommand(pMCI_Device, AT91C_MMC_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT); + + if(AT91F_MCI_MMC_GetAllOCR(pMCI_Device) == AT91C_INIT_ERROR) + return AT91C_INIT_ERROR; + + Nb_Cards_Found = AT91F_MCI_MMC_GetAllCID(pMCI_Device,tab_response); + if (Nb_Cards_Found != AT91C_CMD_SEND_ERROR) + { + //* Set the Mode Register + AT91C_BASE_MCI->MCI_MR = AT91C_MCI_MR_PDCMODE; + + for(i = 0; i < Nb_Cards_Found; i++) + { + if (AT91F_MCI_GetCSD(pMCI_Device, + pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address, + tab_response) != AT91C_CMD_SEND_OK) + pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address = 0; + else + { + pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M ); + pMCI_Device->pMCI_DeviceFeatures[i].Max_Write_DataBlock_Length = 1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M ); + pMCI_Device->pMCI_DeviceFeatures[i].Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v22_SECT_SIZE_S) & AT91C_CSD_v22_SECT_SIZE_M ); + pMCI_Device->pMCI_DeviceFeatures[i].Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M; + pMCI_Device->pMCI_DeviceFeatures[i].Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M; + + // None in MMC specification version 2.2 + pMCI_Device->pMCI_DeviceFeatures[i].Erase_Block_Enable = 0; + + pMCI_Device->pMCI_DeviceFeatures[i].Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M; + pMCI_Device->pMCI_DeviceFeatures[i].Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M; + + //// Compute Memory Capacity + // compute MULT + mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 ); + // compute MSB of C_SIZE + blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2; + // compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR + blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 ); + + pMCI_Device->pMCI_DeviceFeatures[i].Memory_Capacity = pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length * blocknr; + //// End of Compute Memory Capacity + + } // end of else + } // end of for + + return AT91C_INIT_OK; + } // end of if + + return AT91C_INIT_ERROR; +} +#endif + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_SDCard_GetOCR +//* \brief Asks to all cards to send their operations conditions +//*---------------------------------------------------------------------------- +int AT91F_MCI_SDCard_GetOCR (AT91PS_MciDevice pMCI_Device) +{ + unsigned int response =0x0; + + // The RCA to be used for CMD55 in Idle state shall be the card's default RCA=0x0000. + pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = 0x0; + + while( (response & AT91C_CARD_POWER_UP_BUSY) != AT91C_CARD_POWER_UP_BUSY ) + { + response = AT91F_MCI_SDCard_SendAppCommand(pMCI_Device, + AT91C_SDCARD_APP_OP_COND_CMD, + AT91C_MMC_HOST_VOLTAGE_RANGE); + if (response != AT91C_CMD_SEND_OK) + return AT91C_INIT_ERROR; + + response = AT91C_BASE_MCI->MCI_RSPR[0]; + } + + return(AT91C_BASE_MCI->MCI_RSPR[0]); +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_SDCard_GetCID +//* \brief Asks to the SDCard on the chosen slot to send its CID +//*---------------------------------------------------------------------------- +int AT91F_MCI_SDCard_GetCID (AT91PS_MciDevice pMCI_Device, unsigned int *response) +{ + if(AT91F_MCI_SendCommand(pMCI_Device, + AT91C_ALL_SEND_CID_CMD, + AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK) + return AT91C_CMD_SEND_ERROR; + + response[0] = AT91C_BASE_MCI->MCI_RSPR[0]; + response[1] = AT91C_BASE_MCI->MCI_RSPR[1]; + response[2] = AT91C_BASE_MCI->MCI_RSPR[2]; + response[3] = AT91C_BASE_MCI->MCI_RSPR[3]; + + return AT91C_CMD_SEND_OK; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_SDCard_SetBusWidth +//* \brief Set bus width for SDCard +//*---------------------------------------------------------------------------- +int AT91F_MCI_SDCard_SetBusWidth(AT91PS_MciDevice pMCI_Device) +{ + volatile int ret_value; + char bus_width; + + do + { + ret_value =AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address); + } + while((ret_value > 0) && ((ret_value & AT91C_SR_READY_FOR_DATA) == 0)); + + // Select Card + AT91F_MCI_SendCommand(pMCI_Device, + AT91C_SEL_DESEL_CARD_CMD, + (pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address)<<16); + + // Set bus width for Sdcard + if(pMCI_Device->pMCI_DeviceDesc->SDCard_bus_width == AT91C_MCI_SCDBUS) + bus_width = AT91C_BUS_WIDTH_4BITS; + else bus_width = AT91C_BUS_WIDTH_1BIT; + + if (AT91F_MCI_SDCard_SendAppCommand(pMCI_Device,AT91C_SDCARD_SET_BUS_WIDTH_CMD,bus_width) != AT91C_CMD_SEND_OK) + return AT91C_CMD_SEND_ERROR; + + return AT91C_CMD_SEND_OK; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_SDCard_Init +//* \brief Return the SDCard initialisation status +//*---------------------------------------------------------------------------- +int AT91F_MCI_SDCard_Init (AT91PS_MciDevice pMCI_Device) +{ + unsigned int tab_response[4]; + unsigned int mult,blocknr; + + AT91F_MCI_SendCommand(pMCI_Device, AT91C_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT); + + if(AT91F_MCI_SDCard_GetOCR(pMCI_Device) == AT91C_INIT_ERROR) + return AT91C_INIT_ERROR; + + if (AT91F_MCI_SDCard_GetCID(pMCI_Device,tab_response) == AT91C_CMD_SEND_OK) + { + pMCI_Device->pMCI_DeviceFeatures->Card_Inserted = AT91C_SD_CARD_INSERTED; + + if (AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_RELATIVE_ADDR_CMD, 0) == AT91C_CMD_SEND_OK) + { + pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = (AT91C_BASE_MCI->MCI_RSPR[0] >> 16); + if (AT91F_MCI_GetCSD(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address,tab_response) == AT91C_CMD_SEND_OK) + { + pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M ); + pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length = 1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M ); + pMCI_Device->pMCI_DeviceFeatures->Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v21_SECT_SIZE_S) & AT91C_CSD_v21_SECT_SIZE_M ); + pMCI_Device->pMCI_DeviceFeatures->Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M; + pMCI_Device->pMCI_DeviceFeatures->Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M; + pMCI_Device->pMCI_DeviceFeatures->Erase_Block_Enable = (tab_response[3] >> AT91C_CSD_v21_ER_BLEN_EN_S) & AT91C_CSD_v21_ER_BLEN_EN_M; + pMCI_Device->pMCI_DeviceFeatures->Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M; + pMCI_Device->pMCI_DeviceFeatures->Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M; + + //// Compute Memory Capacity + // compute MULT + mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 ); + // compute MSB of C_SIZE + blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2; + // compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR + blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 ); + + pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity = pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length * blocknr; + //// End of Compute Memory Capacity + printf("SD-Card: %d Bytes\n\r", pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity); + + if( AT91F_MCI_SDCard_SetBusWidth(pMCI_Device) == AT91C_CMD_SEND_OK ) + { + if (AT91F_MCI_SetBlocklength(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) == AT91C_CMD_SEND_OK) + return AT91C_INIT_OK; + } + } + } + } + return AT91C_INIT_ERROR; +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_CfgDevice +//* \brief This function is used to initialise MMC or SDCard Features +//*---------------------------------------------------------------------------- +void AT91F_CfgDevice(void) +{ + // Init Device Structure + + MCI_Device_Features.Relative_Card_Address = 0; + MCI_Device_Features.Card_Inserted = AT91C_CARD_REMOVED; + MCI_Device_Features.Max_Read_DataBlock_Length = 0; + MCI_Device_Features.Max_Write_DataBlock_Length = 0; + MCI_Device_Features.Read_Partial = 0; + MCI_Device_Features.Write_Partial = 0; + MCI_Device_Features.Erase_Block_Enable = 0; + MCI_Device_Features.Sector_Size = 0; + MCI_Device_Features.Memory_Capacity = 0; + + MCI_Device_Desc.state = AT91C_MCI_IDLE; + MCI_Device_Desc.SDCard_bus_width = AT91C_MCI_SCDBUS; + + // Init AT91S_DataFlash Global Structure, by default AT45DB choosen !!! + MCI_Device.pMCI_DeviceDesc = &MCI_Device_Desc; + MCI_Device.pMCI_DeviceFeatures = &MCI_Device_Features; + +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCI_Init +//* \brief Initialsise Card +//*---------------------------------------------------------------------------- +int AT91F_MCI_Init(void) +{ + +/////////////////////////////////////////////////////////////////////////////////////////// +// MCI Init : common to MMC and SDCard +/////////////////////////////////////////////////////////////////////////////////////////// + + // Set up PIO SDC_TYPE to switch on MMC/SDCard and not DataFlash Card + AT91F_PIO_CfgOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7); + AT91F_PIO_SetOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7); + + // Init MCI for MMC and SDCard interface + AT91F_MCI_CfgPIO(); + AT91F_MCI_CfgPMC(); + AT91F_PDC_Open(AT91C_BASE_PDC_MCI); + + // Disable all the interrupts + AT91C_BASE_MCI->MCI_IDR = 0xFFFFFFFF; + + // Init MCI Device Structures + AT91F_CfgDevice(); + + // Configure MCI interrupt + AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, + AT91C_ID_MCI, + AT91C_AIC_PRIOR_HIGHEST, + AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, + AT91F_ASM_MCI_Handler); + + // Enable MCI interrupt + AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_MCI); + + // Enable Receiver + AT91F_US_EnableRx((AT91PS_USART) AT91C_BASE_DBGU); + + AT91F_MCI_Configure(AT91C_BASE_MCI, + AT91C_MCI_DTOR_1MEGA_CYCLES, + AT91C_MCI_MR_PDCMODE, // 15MHz for MCK = 60MHz (CLKDIV = 1) + AT91C_MCI_SDCARD_4BITS_SLOTA); + + if(AT91F_MCI_SDCard_Init(&MCI_Device) != AT91C_INIT_OK) + return FALSE; + else + return TRUE; + +} + +//*---------------------------------------------------------------------------- +//* \fn AT91F_MCIDeviceWaitReady +//* \brief Wait for MCI Device ready +//*---------------------------------------------------------------------------- +void AT91F_MCIDeviceWaitReady(unsigned int timeout) +{ + volatile int status; + + do + { + status = AT91C_BASE_MCI->MCI_SR; + timeout--; + } + while( !(status & AT91C_MCI_NOTBUSY) && (timeout>0) ); +} + +unsigned int swab32(unsigned int data) +{ + unsigned int res = 0; + + res = (data & 0x000000ff) << 24 | + (data & 0x0000ff00) << 8 | + (data & 0x00ff0000) >> 8 | + (data & 0xff000000) >> 24; + + return res; +} + +//*-------------------------------------------------------------------- +//* \fn AT91F_MCI_ReadBlockSwab +//* \brief Read Block and swap byte order +//*-------------------------------------------------------------------- +int AT91F_MCI_ReadBlockSwab( + AT91PS_MciDevice pMCI_Device, + int src, + unsigned int *databuffer, + int sizeToRead) +{ + int i; + unsigned char *buf = (unsigned char *)databuffer; + + //* Read Block 1 + for(i=0;i<BUFFER_SIZE_MCI_DEVICE;i++) + *buf++ = 0x00; + AT91F_MCI_ReadBlock(&MCI_Device,src,databuffer,sizeToRead); + + //* Wait end of Read + AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT); + + { + int index; + unsigned int *uiBuffer = databuffer; + + for(index = 0; index < 512/4; index++) + uiBuffer[index] = swab32(uiBuffer[index]); + } + return(1); +} + diff --git a/target/linux/at91/image/dfboot/src/stdio.h b/target/linux/at91/image/dfboot/src/stdio.h new file mode 100644 index 0000000..e4e35ec --- /dev/null +++ b/target/linux/at91/image/dfboot/src/stdio.h @@ -0,0 +1,18 @@ +#include <stdarg.h> +#include <stdbool.h> + +#ifndef NULL +#define NULL ((void *)0) +#endif + +void at91_init_uarts(void); +int puts(const char *str); +int putc(int c); +int putchar(int c); +int getc(); + +int strlen(const char *str); + +int hvfprintf(const char *fmt, va_list ap); + +int printf(const char *fmt, ...); diff --git a/target/linux/at91/image/u-boot/Makefile b/target/linux/at91/image/u-boot/Makefile new file mode 100644 index 0000000..6fd667d --- /dev/null +++ b/target/linux/at91/image/u-boot/Makefile @@ -0,0 +1,50 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/kernel.mk + +PKG_NAME:=u-boot +PKG_VERSION:=1.1.4 +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 +PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot +PKG_MD5SUM:= +PKG_CAT:=bzcat + +include $(INCLUDE_DIR)/package.mk + +UBOOT_CONFIG=$(strip $(subst ",, $(CONFIG_UBOOT_TARGET))) +LAN_IP=$(strip $(CONFIG_UBOOT_IPADDR)) +LAN_SERVERIP=$(strip $(subst ",, $(CONFIG_UBOOT_SERVERIP))) + +define Build/Compile + $(MAKE) -C $(PKG_BUILD_DIR) $(UBOOT_CONFIG)_config + export CROSS_COMPILE=$(TARGET_CROSS); \ + export LAN_IP=$(LAN_IP); \ + export LAN_SERVERIP=$(LAN_SERVERIP); \ + $(MAKE) -C $(PKG_BUILD_DIR) + mkdir -p $(PKG_BUILD_DIR)/ubclient + $(CP) ./ubclient/* $(PKG_BUILD_DIR)/ubclient + export LAN_IP=$(LAN_IP); \ + export LAN_SERVERIP=$(LAN_SERVERIP); \ + $(MAKE) -C $(PKG_BUILD_DIR)/ubclient \ + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS) -Dtarget_$(BOARD)=1" +endef + +define Build/InstallDev + dd if=$(PKG_BUILD_DIR)/u-boot.bin of=$(PKG_BUILD_DIR)/u-boot.block bs=232k count=1 conv=sync +# $(INSTALL_DIR) $(STAGING_DIR)/ubclient/sbin +# $(INSTALL_BIN) $(PKG_BUILD_DIR)/ubclient/ubpar $(STAGING_DIR)/ubclient/sbin/ + $(CP) $(PKG_BUILD_DIR)/ubclient/ubpar ../../base-files/default/sbin +endef + +$(eval $(call Build/DefaultTargets)) diff --git a/target/linux/at91/image/u-boot/patches/001-lowlevel-config.patch b/target/linux/at91/image/u-boot/patches/001-lowlevel-config.patch new file mode 100644 index 0000000..25f92e4 --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/001-lowlevel-config.patch @@ -0,0 +1,91 @@ +--- u-boot-1.1.4/cpu/arm920t/config.mk 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4.klaus/cpu/arm920t/config.mk 2006-02-27 19:07:41.000000000 +0100 +@@ -30,5 +30,5 @@ + # Supply options according to compiler version + # + # ========================================================================= +-PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) ++PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32) + PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) +--- u-boot-1.1.4/cpu/arm920t/start.S 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4.klaus/cpu/arm920t/start.S 2006-02-22 16:45:24.000000000 +0100 +@@ -237,6 +237,7 @@ + */ + + ++#ifndef CONFIG_SKIP_LOWLEVEL_INIT + cpu_init_crit: + /* + * flush v4 I/D caches +@@ -265,6 +266,7 @@ + mov lr, ip + mov pc, lr + ++#endif + + /* + ************************************************************************* +--- u-boot-1.1.4/examples/Makefile 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4.klaus/examples/Makefile 2006-03-02 02:37:14.000000000 +0100 +@@ -30,7 +30,7 @@ + endif + + ifeq ($(ARCH),arm) +-LOAD_ADDR = 0xc100000 ++LOAD_ADDR = 0x21000000 + endif + + ifeq ($(ARCH),mips) +--- u-boot-1.1.4/include/config.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.klaus/include/config.h 2006-02-27 19:04:46.000000000 +0100 +@@ -0,0 +1,2 @@ ++/* Automatically generated - do not edit */ ++#include <configs/at91rm9200dk.h> +--- u-boot-1.1.4/include/config.mk 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.klaus/include/config.mk 2006-02-27 19:04:46.000000000 +0100 +@@ -0,0 +1,4 @@ ++ARCH = arm ++CPU = arm920t ++BOARD = at91rm9200dk ++SOC = at91rm9200 +--- u-boot-1.1.4/include/configs/at91rm9200dk.h 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4.klaus/include/configs/at91rm9200dk.h 2006-02-26 22:44:17.000000000 +0100 +@@ -25,6 +25,11 @@ + #ifndef __CONFIG_H + #define __CONFIG_H + ++// Added 2 defines to skip re-init lowlevel and relocate HCG HLH ++// ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ + /* ARM asynchronous clock */ + #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ + #define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ +@@ -165,12 +170,12 @@ + #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ + #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +-#undef CFG_ENV_IS_IN_DATAFLASH ++#define CFG_ENV_IS_IN_DATAFLASH + + #ifdef CFG_ENV_IS_IN_DATAFLASH +-#define CFG_ENV_OFFSET 0x20000 ++#define CFG_ENV_OFFSET 0x21000 + #define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +-#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ ++#define CFG_ENV_SIZE 0x8400 /* 0x8000 */ + #else + #define CFG_ENV_IS_IN_FLASH 1 + #ifdef CONFIG_SKIP_LOWLEVEL_INIT +--- u-boot-1.1.4/Makefile 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4.klaus/Makefile 2006-03-02 02:49:23.000000000 +0100 +@@ -57,7 +57,7 @@ + CROSS_COMPILE = powerpc-linux- + endif + ifeq ($(ARCH),arm) +-CROSS_COMPILE = arm-linux- ++CROSS_COMPILE = ../staging_dir/bin/arm-linux- + endif + ifeq ($(ARCH),i386) + ifeq ($(HOSTARCH),i387) diff --git a/target/linux/at91/image/u-boot/patches/002-dataflash_machine.patch b/target/linux/at91/image/u-boot/patches/002-dataflash_machine.patch new file mode 100644 index 0000000..cf7648c --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/002-dataflash_machine.patch @@ -0,0 +1,6065 @@ +diff -Naur u-boot-1.1.4.org/board/vlink/at45.c u-boot-1.1.4.tmp/board/vlink/at45.c +--- u-boot-1.1.4.org/board/vlink/at45.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.tmp/board/vlink/at45.c 2005-12-16 17:39:27.000000000 +0100 +@@ -0,0 +1,621 @@ ++/* Driver for ATMEL DataFlash support ++ * Author : Hamid Ikdoumi (Atmel) ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++ ++#include <config.h> ++#include <common.h> ++#include <asm/hardware.h> ++ ++#ifdef CONFIG_HAS_DATAFLASH ++#include <dataflash.h> ++ ++#define AT91C_SPI_CLK 10000000 /* Max Value = 10MHz to be compliant to ++the Continuous Array Read function */ ++ ++/* AC Characteristics */ ++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ ++#define DATAFLASH_TCSS (0xC << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++#define AT91C_TIMEOUT_WRDY 200000 ++#define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0 : NPCS0 %1110 */ ++#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3 : NPCS3 %0111 */ ++ ++void AT91F_SpiInit(void) { ++ ++/*-------------------------------------------------------------------*/ ++/* SPI DataFlash Init */ ++/*-------------------------------------------------------------------*/ ++ /* Configure PIOs */ ++ AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | ++ AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK; ++ AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | ++ AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK; ++ /* Enable CLock */ ++ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI; ++ ++ /* Reset the SPI */ ++ AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST; ++ ++ /* Configure SPI in Master Mode with No CS selected !!! */ ++ AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; ++ ++ /* Configure CS0 and CS3 */ ++ *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & ++ DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); ++ ++ *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & ++ DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); ++ ++} ++ ++void AT91F_SpiEnable(int cs) { ++ switch(cs) { ++ case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ ++ AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; ++ AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) & AT91C_SPI_PCS); ++ break; ++ case 3: /* Configure SPI CS3 for Serial DataFlash Card */ ++ /* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */ ++ AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7; /* Set in PIO mode */ ++ AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7; /* Configure in output */ ++ /* Clear Output */ ++ AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7; ++ /* Configure PCS */ ++ AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; ++ AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); ++ break; ++ } ++ ++ /* SPI_Enable */ ++ AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; ++} ++ ++/*----------------------------------------------------------------------------*/ ++/* \fn AT91F_SpiWrite */ ++/* \brief Set the PDC registers for a transfert */ ++/*----------------------------------------------------------------------------*/ ++unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc ) ++{ ++ unsigned int timeout; ++ ++ pDesc->state = BUSY; ++ ++ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; ++ ++ /* Initialize the Transmit and Receive Pointer */ ++ AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ; ++ AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ; ++ ++ /* Intialize the Transmit and Receive Counters */ ++ AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size; ++ AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size; ++ ++ if ( pDesc->tx_data_size != 0 ) { ++ /* Initialize the Next Transmit and Next Receive Pointer */ ++ AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ; ++ AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ; ++ ++ /* Intialize the Next Transmit and Next Receive Counters */ ++ AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ; ++ AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ; ++ } ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked(); ++ timeout = 0; ++ ++ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; ++ while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) && ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT)); ++ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; ++ pDesc->state = IDLE; ++ ++ if (timeout >= CFG_SPI_WRITE_TOUT){ ++ printf("Error Timeout\n\r"); ++ return DATAFLASH_ERROR; ++ } ++ ++ return DATAFLASH_OK; ++} ++ ++ ++/*----------------------------------------------------------------------*/ ++/* \fn AT91F_DataFlashSendCommand */ ++/* \brief Generic function to send a command to the dataflash */ ++/*----------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_DataFlashSendCommand( ++ AT91PS_DataFlash pDataFlash, ++ unsigned char OpCode, ++ unsigned int CmdSize, ++ unsigned int DataflashAddress) ++{ ++ unsigned int adr; ++ ++ if ( (pDataFlash->pDataFlashDesc->state) != IDLE) ++ return DATAFLASH_BUSY; ++ ++ /* process the address to obtain page address and byte address */ ++ adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << pDataFlash->pDevice->page_offset) + (DataflashAddress % (pDataFlash->pDevice->pages_size)); ++ ++ /* fill the command buffer */ ++ pDataFlash->pDataFlashDesc->command[0] = OpCode; ++ if (pDataFlash->pDevice->pages_number >= 16384) { ++ pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24); ++ pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16); ++ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8); ++ pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF); ++ } else { ++ pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16); ++ pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8); ++ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ; ++ pDataFlash->pDataFlashDesc->command[4] = 0; ++ } ++ pDataFlash->pDataFlashDesc->command[5] = 0; ++ pDataFlash->pDataFlashDesc->command[6] = 0; ++ pDataFlash->pDataFlashDesc->command[7] = 0; ++ ++ /* Initialize the SpiData structure for the spi write fuction */ ++ pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; ++ pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize ; ++ pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; ++ pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize ; ++ ++ /* send the command and read the data */ ++ return AT91F_SpiWrite (pDataFlash->pDataFlashDesc); ++} ++ ++ ++/*----------------------------------------------------------------------*/ ++/* \fn AT91F_DataFlashGetStatus */ ++/* \brief Read the status register of the dataflash */ ++/*----------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) ++{ ++ AT91S_DataFlashStatus status; ++ ++ /* if a transfert is in progress ==> return 0 */ ++ if( (pDesc->state) != IDLE) ++ return DATAFLASH_BUSY; ++ ++ /* first send the read status command (D7H) */ ++ pDesc->command[0] = DB_STATUS; ++ pDesc->command[1] = 0; ++ ++ pDesc->DataFlash_state = GET_STATUS; ++ pDesc->tx_data_size = 0 ; /* Transmit the command and receive response */ ++ pDesc->tx_cmd_pt = pDesc->command ; ++ pDesc->rx_cmd_pt = pDesc->command ; ++ pDesc->rx_cmd_size = 2 ; ++ pDesc->tx_cmd_size = 2 ; ++ status = AT91F_SpiWrite (pDesc); ++ ++ pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1); ++ ++ return status; ++} ++ ++ ++/*----------------------------------------------------------------------*/ ++/* \fn AT91F_DataFlashWaitReady */ ++/* \brief wait for dataflash ready (bit7 of the status register == 1) */ ++/*----------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc pDataFlashDesc, unsigned int timeout) ++{ ++ pDataFlashDesc->DataFlash_state = IDLE; ++ ++ do { ++ AT91F_DataFlashGetStatus(pDataFlashDesc); ++ timeout--; ++ } while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0) ); ++ ++ if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) ++ return DATAFLASH_ERROR; ++ ++ return DATAFLASH_OK; ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_DataFlashContinuousRead */ ++/* Object : Continuous stream Read */ ++/* Input Parameters : DataFlash Service */ ++/* : <src> = dataflash address */ ++/* : <*dataBuffer> = data buffer pointer */ ++/* : <sizeToRead> = data buffer size */ ++/* Return value : State of the dataflash */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( ++ AT91PS_DataFlash pDataFlash, ++ int src, ++ unsigned char *dataBuffer, ++ int sizeToRead ) ++{ ++ AT91S_DataFlashStatus status; ++ /* Test the size to read in the device */ ++ if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) ++ return DATAFLASH_MEMORY_OVERFLOW; ++ ++ pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; ++ pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead; ++ pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; ++ pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead; ++ ++ status = AT91F_DataFlashSendCommand (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); ++ /* Send the command to the dataflash */ ++ return(status); ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_DataFlashPagePgmBuf */ ++/* Object : Main memory page program through buffer 1 or buffer 2 */ ++/* Input Parameters : DataFlash Service */ ++/* : <*src> = Source buffer */ ++/* : <dest> = dataflash destination address */ ++/* : <SizeToWrite> = data buffer size */ ++/* Return value : State of the dataflash */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( ++ AT91PS_DataFlash pDataFlash, ++ unsigned char *src, ++ unsigned int dest, ++ unsigned int SizeToWrite) ++{ ++ int cmdsize; ++ pDataFlash->pDataFlashDesc->tx_data_pt = src ; ++ pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; ++ pDataFlash->pDataFlashDesc->rx_data_pt = src; ++ pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite; ++ ++ cmdsize = 4; ++ /* Send the command to the dataflash */ ++ if (pDataFlash->pDevice->pages_number >= 16384) ++ cmdsize = 5; ++ return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest)); ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_MainMemoryToBufferTransfert */ ++/* Object : Read a page in the SRAM Buffer 1 or 2 */ ++/* Input Parameters : DataFlash Service */ ++/* : Page concerned */ ++/* : */ ++/* Return value : State of the dataflash */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert( ++ AT91PS_DataFlash pDataFlash, ++ unsigned char BufferCommand, ++ unsigned int page) ++{ ++ int cmdsize; ++ /* Test if the buffer command is legal */ ++ if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF)) ++ return DATAFLASH_BAD_COMMAND; ++ ++ /* no data to transmit or receive */ ++ pDataFlash->pDataFlashDesc->tx_data_size = 0; ++ cmdsize = 4; ++ if (pDataFlash->pDevice->pages_number >= 16384) ++ cmdsize = 5; ++ return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, page*pDataFlash->pDevice->pages_size)); ++} ++ ++ ++/*----------------------------------------------------------------------------- */ ++/* Function Name : AT91F_DataFlashWriteBuffer */ ++/* Object : Write data to the internal sram buffer 1 or 2 */ ++/* Input Parameters : DataFlash Service */ ++/* : <BufferCommand> = command to write buffer1 or buffer2 */ ++/* : <*dataBuffer> = data buffer to write */ ++/* : <bufferAddress> = address in the internal buffer */ ++/* : <SizeToWrite> = data buffer size */ ++/* Return value : State of the dataflash */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( ++ AT91PS_DataFlash pDataFlash, ++ unsigned char BufferCommand, ++ unsigned char *dataBuffer, ++ unsigned int bufferAddress, ++ int SizeToWrite ) ++{ ++ int cmdsize; ++ /* Test if the buffer command is legal */ ++ if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE)) ++ return DATAFLASH_BAD_COMMAND; ++ ++ /* buffer address must be lower than page size */ ++ if (bufferAddress > pDataFlash->pDevice->pages_size) ++ return DATAFLASH_BAD_ADDRESS; ++ ++ if ( (pDataFlash->pDataFlashDesc->state) != IDLE) ++ return DATAFLASH_BUSY; ++ ++ /* Send first Write Command */ ++ pDataFlash->pDataFlashDesc->command[0] = BufferCommand; ++ pDataFlash->pDataFlashDesc->command[1] = 0; ++ if (pDataFlash->pDevice->pages_number >= 16384) { ++ pDataFlash->pDataFlashDesc->command[2] = 0; ++ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; ++ pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; ++ cmdsize = 5; ++ } else { ++ pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; ++ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; ++ pDataFlash->pDataFlashDesc->command[4] = 0; ++ cmdsize = 4; ++ } ++ ++ pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; ++ pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ; ++ pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; ++ pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ; ++ ++ pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer ; ++ pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer ; ++ pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite ; ++ pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; ++ ++ return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); ++} ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_PageErase */ ++/* Object : Erase a page */ ++/* Input Parameters : DataFlash Service */ ++/* : Page concerned */ ++/* : */ ++/* Return value : State of the dataflash */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_PageErase( ++ AT91PS_DataFlash pDataFlash, ++ unsigned int page) ++{ ++ int cmdsize; ++ /* Test if the buffer command is legal */ ++ /* no data to transmit or receive */ ++ pDataFlash->pDataFlashDesc->tx_data_size = 0; ++ ++ cmdsize = 4; ++ if (pDataFlash->pDevice->pages_number >= 16384) ++ cmdsize = 5; ++ return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, page*pDataFlash->pDevice->pages_size)); ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_BlockErase */ ++/* Object : Erase a Block */ ++/* Input Parameters : DataFlash Service */ ++/* : Page concerned */ ++/* : */ ++/* Return value : State of the dataflash */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_BlockErase( ++ AT91PS_DataFlash pDataFlash, ++ unsigned int block) ++{ ++ int cmdsize; ++ /* Test if the buffer command is legal */ ++ /* no data to transmit or receive */ ++ pDataFlash->pDataFlashDesc->tx_data_size = 0; ++ cmdsize = 4; ++ if (pDataFlash->pDevice->pages_number >= 16384) ++ cmdsize = 5; ++ return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, block*8*pDataFlash->pDevice->pages_size)); ++} ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_WriteBufferToMain */ ++/* Object : Write buffer to the main memory */ ++/* Input Parameters : DataFlash Service */ ++/* : <BufferCommand> = command to send to buffer1 or buffer2 */ ++/* : <dest> = main memory address */ ++/* Return value : State of the dataflash */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_WriteBufferToMain ( ++ AT91PS_DataFlash pDataFlash, ++ unsigned char BufferCommand, ++ unsigned int dest ) ++{ ++ int cmdsize; ++ /* Test if the buffer command is correct */ ++ if ((BufferCommand != DB_BUF1_PAGE_PGM) && ++ (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && ++ (BufferCommand != DB_BUF2_PAGE_PGM) && ++ (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) ) ++ return DATAFLASH_BAD_COMMAND; ++ ++ /* no data to transmit or receive */ ++ pDataFlash->pDataFlashDesc->tx_data_size = 0; ++ ++ cmdsize = 4; ++ if (pDataFlash->pDevice->pages_number >= 16384) ++ cmdsize = 5; ++ /* Send the command to the dataflash */ ++ return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest)); ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_PartialPageWrite */ ++/* Object : Erase partielly a page */ ++/* Input Parameters : <page> = page number */ ++/* : <AdrInpage> = adr to begin the fading */ ++/* : <length> = Number of bytes to erase */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_PartialPageWrite ( ++ AT91PS_DataFlash pDataFlash, ++ unsigned char *src, ++ unsigned int dest, ++ unsigned int size) ++{ ++ unsigned int page; ++ unsigned int AdrInPage; ++ ++ page = dest / (pDataFlash->pDevice->pages_size); ++ AdrInPage = dest % (pDataFlash->pDevice->pages_size); ++ ++ /* Read the contents of the page in the Sram Buffer */ ++ AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page); ++ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); ++ /*Update the SRAM buffer */ ++ AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size); ++ ++ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); ++ ++ /* Erase page if a 128 Mbits device */ ++ if (pDataFlash->pDevice->pages_number >= 16384) { ++ AT91F_PageErase(pDataFlash, page); ++ /* Rewrite the modified Sram Buffer in the main memory */ ++ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); ++ } ++ ++ /* Rewrite the modified Sram Buffer in the main memory */ ++ return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, (page*pDataFlash->pDevice->pages_size))); ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_DataFlashWrite */ ++/* Object : */ ++/* Input Parameters : <*src> = Source buffer */ ++/* : <dest> = dataflash adress */ ++/* : <size> = data buffer size */ ++/*------------------------------------------------------------------------------*/ ++AT91S_DataFlashStatus AT91F_DataFlashWrite( ++ AT91PS_DataFlash pDataFlash, ++ unsigned char *src, ++ int dest, ++ int size ) ++{ ++ unsigned int length; ++ unsigned int page; ++ unsigned int status; ++ ++ AT91F_SpiEnable(pDataFlash->pDevice->cs); ++ ++ if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) ++ return DATAFLASH_MEMORY_OVERFLOW; ++ ++ /* If destination does not fit a page start address */ ++ if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) { ++ length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size))); ++ ++ if (size < length) ++ length = size; ++ ++ if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length)) ++ return DATAFLASH_ERROR; ++ ++ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); ++ ++ /* Update size, source and destination pointers */ ++ size -= length; ++ dest += length; ++ src += length; ++ } ++ ++ while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) { ++ /* program dataflash page */ ++ page = (unsigned int)dest / (pDataFlash->pDevice->pages_size); ++ ++ status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, 0, pDataFlash->pDevice->pages_size); ++ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); ++ ++ status = AT91F_PageErase(pDataFlash, page); ++ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); ++ if (!status) ++ return DATAFLASH_ERROR; ++ ++ status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest); ++ if(!status) ++ return DATAFLASH_ERROR; ++ ++ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); ++ ++ /* Update size, source and destination pointers */ ++ size -= pDataFlash->pDevice->pages_size ; ++ dest += pDataFlash->pDevice->pages_size ; ++ src += pDataFlash->pDevice->pages_size ; ++ } ++ ++ /* If still some bytes to read */ ++ if ( size > 0 ) { ++ /* program dataflash page */ ++ if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) ) ++ return DATAFLASH_ERROR; ++ ++ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); ++ } ++ return DATAFLASH_OK; ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_DataFlashRead */ ++/* Object : Read a block in dataflash */ ++/* Input Parameters : */ ++/* Return value : */ ++/*------------------------------------------------------------------------------*/ ++int AT91F_DataFlashRead( ++ AT91PS_DataFlash pDataFlash, ++ unsigned long addr, ++ unsigned long size, ++ char *buffer) ++{ ++ unsigned long SizeToRead; ++ ++ AT91F_SpiEnable(pDataFlash->pDevice->cs); ++ ++ if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) ++ return -1; ++ ++ while (size) { ++ SizeToRead = (size < 0x8000)? size:0x8000; ++ ++ if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) ++ return -1; ++ ++ if (AT91F_DataFlashContinuousRead (pDataFlash, addr, buffer, SizeToRead) != DATAFLASH_OK) ++ return -1; ++ ++ size -= SizeToRead; ++ addr += SizeToRead; ++ buffer += SizeToRead; ++ } ++ ++ return DATAFLASH_OK; ++} ++ ++ ++/*------------------------------------------------------------------------------*/ ++/* Function Name : AT91F_DataflashProbe */ ++/* Object : */ ++/* Input Parameters : */ ++/* Return value : Dataflash status register */ ++/*------------------------------------------------------------------------------*/ ++int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) ++{ ++ AT91F_SpiEnable(cs); ++ AT91F_DataFlashGetStatus(pDesc); ++ return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C); ++} ++ ++#endif +diff -Naur u-boot-1.1.4.org/board/vlink/config.mk u-boot-1.1.4.tmp/board/vlink/config.mk +--- u-boot-1.1.4.org/board/vlink/config.mk 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.tmp/board/vlink/config.mk 2005-12-16 17:39:27.000000000 +0100 +@@ -0,0 +1 @@ ++TEXT_BASE = 0x21f00000 +diff -Naur u-boot-1.1.4.org/board/vlink/flash.c u-boot-1.1.4.tmp/board/vlink/flash.c +--- u-boot-1.1.4.org/board/vlink/flash.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.tmp/board/vlink/flash.c 2006-06-05 02:44:43.000000000 +0200 +@@ -0,0 +1,504 @@ ++/* ++ * (C) Copyright 2002 ++ * Lineo, Inc. <www.lineo.com> ++ * Bernhard Kuhn <bkuhn@lineo.com> ++ * ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Alex Zuepke <azu@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ulong myflush(void); ++ ++ ++/* Flash Organization Structure */ ++typedef struct OrgDef ++{ ++ unsigned int sector_number; ++ unsigned int sector_size; ++} OrgDef; ++ ++ ++/* Flash Organizations */ ++OrgDef OrgAT49BV16x4[] = ++{ ++ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ ++ { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ ++ { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ ++}; ++ ++OrgDef OrgAT49BV16x4A[] = ++{ ++ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ ++ { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ ++}; ++ ++OrgDef OrgAT49BV6416[] = ++{ ++ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ ++ { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ ++}; ++ ++flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ++ ++/* AT49BV1614A Codes */ ++#define FLASH_CODE1 0xAA ++#define FLASH_CODE2 0x55 ++#define ID_IN_CODE 0x90 ++#define ID_OUT_CODE 0xF0 ++ ++ ++#define CMD_READ_ARRAY 0x00F0 ++#define CMD_UNLOCK1 0x00AA ++#define CMD_UNLOCK2 0x0055 ++#define CMD_ERASE_SETUP 0x0080 ++#define CMD_ERASE_CONFIRM 0x0030 ++#define CMD_PROGRAM 0x00A0 ++#define CMD_UNLOCK_BYPASS 0x0020 ++#define CMD_SECTOR_UNLOCK 0x0070 ++ ++#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1))) ++#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1))) ++ ++#define BIT_ERASE_DONE 0x0080 ++#define BIT_RDY_MASK 0x0080 ++#define BIT_PROGRAM_ERROR 0x0020 ++#define BIT_TIMEOUT 0x80000000 /* our flag */ ++ ++#define READY 1 ++#define ERR 2 ++#define TMO 4 ++ ++/*----------------------------------------------------------------------- ++ */ ++void flash_identification (flash_info_t * info) ++{ ++ volatile u16 manuf_code, device_code, add_device_code; ++ ++ MEM_FLASH_ADDR1 = FLASH_CODE1; ++ MEM_FLASH_ADDR2 = FLASH_CODE2; ++ MEM_FLASH_ADDR1 = ID_IN_CODE; ++ ++ manuf_code = *(volatile u16 *) CFG_FLASH_BASE; ++ device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2); ++ add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1)); ++ ++ MEM_FLASH_ADDR1 = FLASH_CODE1; ++ MEM_FLASH_ADDR2 = FLASH_CODE2; ++ MEM_FLASH_ADDR1 = ID_OUT_CODE; ++ ++ /* Vendor type */ ++ info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; ++ printf ("Atmel: "); ++ ++ if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { ++ ++ if ((add_device_code & FLASH_TYPEMASK) == ++ (ATM_ID_BV1614A & FLASH_TYPEMASK)) { ++ info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; ++ printf ("AT49BV1614A (16Mbit)\n"); ++ } else { /* AT49BV1614 Flash */ ++ info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; ++ printf ("AT49BV1614 (16Mbit)\n"); ++ } ++ ++ } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { ++ info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; ++ printf ("AT49BV6416 (64Mbit)\n"); ++ } ++} ++ ++ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) ++{ ++ int i, nb_sectors = 0; ++ ++ for (i=0; i<nb_blocks; i++){ ++ nb_sectors += pOrgDef[i].sector_number; ++ } ++ ++ return nb_sectors; ++} ++ ++void flash_unlock_sector(flash_info_t * info, unsigned int sector) ++{ ++ volatile u16 *addr = (volatile u16 *) (info->start[sector]); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ *addr = CMD_SECTOR_UNLOCK; ++} ++ ++ ++ulong flash_init (void) ++{ ++ int i, j, k; ++ unsigned int flash_nb_blocks, sector; ++ unsigned int start_address; ++ OrgDef *pOrgDef; ++ ++ ulong size = 0; ++ ++ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { ++ ulong flashbase = 0; ++ ++ flash_identification (&flash_info[i]); ++ ++ if ((flash_info[i].flash_id & FLASH_TYPEMASK) == ++ (ATM_ID_BV1614 & FLASH_TYPEMASK)) { ++ ++ pOrgDef = OrgAT49BV16x4; ++ flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); ++ } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == ++ (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ ++ ++ pOrgDef = OrgAT49BV16x4A; ++ flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); ++ } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == ++ (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ ++ ++ pOrgDef = OrgAT49BV6416; ++ flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); ++ } else { ++ flash_nb_blocks = 0; ++ pOrgDef = OrgAT49BV16x4; ++ } ++ ++ flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); ++ memset (flash_info[i].protect, 0, flash_info[i].sector_count); ++ ++ if (i == 0) ++ flashbase = PHYS_FLASH_1; ++ else ++ panic ("configured too many flash banks!\n"); ++ ++ sector = 0; ++ start_address = flashbase; ++ flash_info[i].size = 0; ++ ++ for (j = 0; j < flash_nb_blocks; j++) { ++ for (k = 0; k < pOrgDef[j].sector_number; k++) { ++ flash_info[i].start[sector++] = start_address; ++ start_address += pOrgDef[j].sector_size; ++ flash_info[i].size += pOrgDef[j].sector_size; ++ } ++ } ++ ++ size += flash_info[i].size; ++ ++ if ((flash_info[i].flash_id & FLASH_TYPEMASK) == ++ (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ ++ ++ /* Unlock all sectors at reset */ ++ for (j=0; j<flash_info[i].sector_count; j++){ ++ flash_unlock_sector(&flash_info[i], j); ++ } ++ } ++ } ++ ++ /* Protect binary boot image */ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_FLASH_BASE, ++ CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]); ++ ++ /* Protect environment variables */ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_ENV_ADDR, ++ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); ++ ++ /* Protect U-Boot gzipped image */ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_U_BOOT_BASE, ++ CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]); ++ ++ return size; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++void flash_print_info (flash_info_t * info) ++{ ++ int i; ++ ++ switch (info->flash_id & FLASH_VENDMASK) { ++ case (ATM_MANUFACT & FLASH_VENDMASK): ++ printf ("Atmel: "); ++ break; ++ default: ++ printf ("Unknown Vendor "); ++ break; ++ } ++ ++ switch (info->flash_id & FLASH_TYPEMASK) { ++ case (ATM_ID_BV1614 & FLASH_TYPEMASK): ++ printf ("AT49BV1614 (16Mbit)\n"); ++ break; ++ case (ATM_ID_BV1614A & FLASH_TYPEMASK): ++ printf ("AT49BV1614A (16Mbit)\n"); ++ break; ++ case (ATM_ID_BV6416 & FLASH_TYPEMASK): ++ printf ("AT49BV6416 (64Mbit)\n"); ++ break; ++ default: ++ printf ("Unknown Chip Type\n"); ++ return; ++ } ++ ++ printf (" Size: %ld MB in %d Sectors\n", ++ info->size >> 20, info->sector_count); ++ ++ printf (" Sector Start Addresses:"); ++ for (i = 0; i < info->sector_count; i++) { ++ if ((i % 5) == 0) { ++ printf ("\n "); ++ } ++ printf (" %08lX%s", info->start[i], ++ info->protect[i] ? " (RO)" : " "); ++ } ++ printf ("\n"); ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++int flash_erase (flash_info_t * info, int s_first, int s_last) ++{ ++ ulong result; ++ int iflag, cflag, prot, sect; ++ int rc = ERR_OK; ++ int chip1; ++ ++ /* first look for protection bits */ ++ ++ if (info->flash_id == FLASH_UNKNOWN) ++ return ERR_UNKNOWN_FLASH_TYPE; ++ ++ if ((s_first < 0) || (s_first > s_last)) { ++ return ERR_INVAL; ++ } ++ ++ if ((info->flash_id & FLASH_VENDMASK) != ++ (ATM_MANUFACT & FLASH_VENDMASK)) { ++ return ERR_UNKNOWN_FLASH_VENDOR; ++ } ++ ++ prot = 0; ++ for (sect = s_first; sect <= s_last; ++sect) { ++ if (info->protect[sect]) { ++ prot++; ++ } ++ } ++ if (prot) ++ return ERR_PROTECTED; ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ /* Start erase on unprotected sectors */ ++ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { ++ printf ("Erasing sector %2d ... ", sect); ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ if (info->protect[sect] == 0) { /* not protected */ ++ volatile u16 *addr = (volatile u16 *) (info->start[sect]); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ *addr = CMD_ERASE_CONFIRM; ++ ++ /* wait until flash is ready */ ++ chip1 = 0; ++ ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ chip1 = TMO; ++ break; ++ } ++ ++ if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) ++ chip1 = READY; ++ ++ } while (!chip1); ++ ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ ++ if (chip1 == ERR) { ++ rc = ERR_PROG_ERROR; ++ goto outahere; ++ } ++ if (chip1 == TMO) { ++ rc = ERR_TIMOUT; ++ goto outahere; ++ } ++ ++ printf ("ok.\n"); ++ } else { /* it was protected */ ++ printf ("protected!\n"); ++ } ++ } ++ ++ if (ctrlc ()) ++ printf ("User Interrupt!\n"); ++ ++outahere: ++ /* allow flash to settle - wait 10 ms */ ++ udelay_masked (10000); ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash ++ */ ++ ++volatile static int write_word (flash_info_t * info, ulong dest, ++ ulong data) ++{ ++ volatile u16 *addr = (volatile u16 *) dest; ++ ulong result; ++ int rc = ERR_OK; ++ int cflag, iflag; ++ int chip1; ++ ++ /* ++ * Check if Flash is (sufficiently) erased ++ */ ++ result = *addr; ++ if ((result & data) != data) ++ return ERR_NOT_ERASED; ++ ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_PROGRAM; ++ *addr = data; ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ /* wait until flash is ready */ ++ chip1 = 0; ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { ++ chip1 = ERR | TMO; ++ break; ++ } ++ if (!chip1 && ((result & 0x80) == (data & 0x80))) ++ chip1 = READY; ++ ++ } while (!chip1); ++ ++ *addr = CMD_READ_ARRAY; ++ ++ if (chip1 == ERR || *addr != data) ++ rc = ERR_PROG_ERROR; ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash. ++ */ ++ ++int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) ++{ ++ ulong wp, data; ++ int rc; ++ ++ if (addr & 1) { ++ printf ("unaligned destination not supported\n"); ++ return ERR_ALIGN; ++ }; ++ ++ if ((int) src & 1) { ++ printf ("unaligned source not supported\n"); ++ return ERR_ALIGN; ++ }; ++ ++ wp = addr; ++ ++ while (cnt >= 2) { ++ data = *((volatile u16 *) src); ++ if ((rc = write_word (info, wp, data)) != 0) { ++ return (rc); ++ } ++ src += 2; ++ wp += 2; ++ cnt -= 2; ++ } ++ ++ if (cnt == 1) { ++ data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << ++ 8); ++ if ((rc = write_word (info, wp, data)) != 0) { ++ return (rc); ++ } ++ src += 1; ++ wp += 1; ++ cnt -= 1; ++ }; ++ ++ return ERR_OK; ++} +diff -Naur u-boot-1.1.4.org/board/vlink/Makefile u-boot-1.1.4.tmp/board/vlink/Makefile +--- u-boot-1.1.4.org/board/vlink/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.tmp/board/vlink/Makefile 2006-06-05 02:48:33.000000000 +0200 +@@ -0,0 +1,46 @@ ++# ++# (C) Copyright 2003 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := vlink.o at45.o flash.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +diff -Naur u-boot-1.1.4.org/board/vlink/u-boot.lds u-boot-1.1.4.tmp/board/vlink/u-boot.lds +--- u-boot-1.1.4.org/board/vlink/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.tmp/board/vlink/u-boot.lds 2005-12-16 17:39:27.000000000 +0100 +@@ -0,0 +1,57 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/arm920t/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +diff -Naur u-boot-1.1.4.org/board/vlink/vlink.c u-boot-1.1.4.tmp/board/vlink/vlink.c +--- u-boot-1.1.4.org/board/vlink/vlink.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.tmp/board/vlink/vlink.c 2006-06-05 03:10:22.000000000 +0200 +@@ -0,0 +1,89 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/AT91RM9200.h> ++#include <at91rm9200_net.h> ++#include <dm9161.h> ++#include <asm/mach-types.h> ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ /* Enable Ctrlc */ ++ console_init_f (); ++ ++ /* Correct IRDA resistor problem */ ++ /* Set PA23_TXD in Output */ ++ (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; ++ ++ /* memory and cpu-speed are setup before relocation */ ++ /* so we do _nothing_ here */ ++ ++ /* arch number of Versalink-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_VLINK; ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ return 0; ++} ++ ++int dram_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_DRIVER_ETHER ++#if (CONFIG_COMMANDS & CFG_CMD_NET) ++ ++/* ++ * Name: ++ * at91rm9200_GetPhyInterface ++ * Description: ++ * Initialise the interface functions to the PHY ++ * Arguments: ++ * None ++ * Return value: ++ * None ++ */ ++void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) ++{ ++ p_phyops->Init = dm9161_InitPhy; ++ p_phyops->IsPhyConnected = dm9161_IsPhyConnected; ++ p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; ++ p_phyops->AutoNegotiate = dm9161_AutoNegotiate; ++} ++ ++#endif /* CONFIG_COMMANDS & CFG_CMD_NET */ ++#endif /* CONFIG_DRIVER_ETHER */ +diff -Naur u-boot-1.1.4.org/include/asm-arm/mach-types.h u-boot-1.1.4.tmp/include/asm-arm/mach-types.h +--- u-boot-1.1.4.org/include/asm-arm/mach-types.h 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4.tmp/include/asm-arm/mach-types.h 2006-06-05 01:29:25.000000000 +0200 +@@ -424,7 +424,7 @@ + #define MACH_TYPE_MPORT3S 411 + #define MACH_TYPE_RA_ALPHA 412 + #define MACH_TYPE_XCEP 413 +-#define MACH_TYPE_ARCOM_MERCURY 414 ++#define MACH_TYPE_ARCOM_VULCAN 414 + #define MACH_TYPE_STARGATE 415 + #define MACH_TYPE_ARMADILLOJ 416 + #define MACH_TYPE_ELROY_JACK 417 +@@ -457,7 +457,7 @@ + #define MACH_TYPE_XM250 444 + #define MACH_TYPE_T6TC1XB 445 + #define MACH_TYPE_ESS710 446 +-#define MACH_TYPE_MX3ADS 447 ++#define MACH_TYPE_MX31ADS 447 + #define MACH_TYPE_HIMALAYA 448 + #define MACH_TYPE_BOLFENK 449 + #define MACH_TYPE_AT91RM9200KR 450 +@@ -563,8 +563,8 @@ + #define MACH_TYPE_ENS_CMU 550 + #define MACH_TYPE_MM6_SDB 551 + #define MACH_TYPE_SATURN 552 +-#define MACH_TYPE_ARGONPLUSEVB 553 +-#define MACH_TYPE_SCMA11EVB 554 ++#define MACH_TYPE_I30030EVB 553 ++#define MACH_TYPE_MXC27530EVB 554 + #define MACH_TYPE_SMDK2800 555 + #define MACH_TYPE_MTWILSON 556 + #define MACH_TYPE_ZITI 557 +@@ -644,7 +644,7 @@ + #define MACH_TYPE_MX2JAZZ 631 + #define MACH_TYPE_MULTIIO 632 + #define MACH_TYPE_HRDISPLAY 633 +-#define MACH_TYPE_SCMA11BB 634 ++#define MACH_TYPE_MXC27530ADS 634 + #define MACH_TYPE_TRIZEPS3 635 + #define MACH_TYPE_ZEFEERDZA 636 + #define MACH_TYPE_ZEFEERDZB 637 +@@ -718,7 +718,7 @@ + #define MACH_TYPE_GEM 707 + #define MACH_TYPE_I858 708 + #define MACH_TYPE_HX2750 709 +-#define MACH_TYPE_ZEUSEVB 710 ++#define MACH_TYPE_MXC91131EVB 710 + #define MACH_TYPE_P700 711 + #define MACH_TYPE_CPE 712 + #define MACH_TYPE_SPITZ 713 +@@ -736,6 +736,331 @@ + #define MACH_TYPE_LN2410SBC 725 + #define MACH_TYPE_CB3RUFC 726 + #define MACH_TYPE_MP2USB 727 ++#define MACH_TYPE_NTNP425C 728 ++#define MACH_TYPE_COLIBRI 729 ++#define MACH_TYPE_PCM7220 730 ++#define MACH_TYPE_GATEWAY7001 731 ++#define MACH_TYPE_PCM027 732 ++#define MACH_TYPE_CMPXA 733 ++#define MACH_TYPE_ANUBIS 734 ++#define MACH_TYPE_ITE8152 735 ++#define MACH_TYPE_LPC3XXX 736 ++#define MACH_TYPE_PUPPETEER 737 ++#define MACH_TYPE_MACH_VADATECH 738 ++#define MACH_TYPE_E570 739 ++#define MACH_TYPE_X50 740 ++#define MACH_TYPE_RECON 741 ++#define MACH_TYPE_XBOARDGP8 742 ++#define MACH_TYPE_FPIC2 743 ++#define MACH_TYPE_AKITA 744 ++#define MACH_TYPE_A81 745 ++#define MACH_TYPE_SVM_SC25X 746 ++#define MACH_TYPE_VADATECH020 747 ++#define MACH_TYPE_TLI 748 ++#define MACH_TYPE_EDB9315LC 749 ++#define MACH_TYPE_PASSEC 750 ++#define MACH_TYPE_DS_TIGER 751 ++#define MACH_TYPE_E310 752 ++#define MACH_TYPE_E330 753 ++#define MACH_TYPE_RT3000 754 ++#define MACH_TYPE_NOKIA770 755 ++#define MACH_TYPE_PNX0106 756 ++#define MACH_TYPE_HX21XX 757 ++#define MACH_TYPE_FARADAY 758 ++#define MACH_TYPE_SBC9312 759 ++#define MACH_TYPE_BATMAN 760 ++#define MACH_TYPE_JPD201 761 ++#define MACH_TYPE_MIPSA 762 ++#define MACH_TYPE_KACOM 763 ++#define MACH_TYPE_SWARCOCPU 764 ++#define MACH_TYPE_SWARCODSL 765 ++#define MACH_TYPE_BLUEANGEL 766 ++#define MACH_TYPE_HAIRYGRAMA 767 ++#define MACH_TYPE_BANFF 768 ++#define MACH_TYPE_CARMEVA 769 ++#define MACH_TYPE_SAM255 770 ++#define MACH_TYPE_PPM10 771 ++#define MACH_TYPE_EDB9315A 772 ++#define MACH_TYPE_SUNSET 773 ++#define MACH_TYPE_STARGATE2 774 ++#define MACH_TYPE_INTELMOTE2 775 ++#define MACH_TYPE_TRIZEPS4 776 ++#define MACH_TYPE_MAINSTONE2 777 ++#define MACH_TYPE_EZ_IXP42X 778 ++#define MACH_TYPE_TAPWAVE_ZODIAC 779 ++#define MACH_TYPE_UNIVERSALMETER 780 ++#define MACH_TYPE_HICOARM9 781 ++#define MACH_TYPE_PNX4008 782 ++#define MACH_TYPE_KWS6000 783 ++#define MACH_TYPE_PORTUX920T 784 ++#define MACH_TYPE_EZ_X5 785 ++#define MACH_TYPE_OMAP_RUDOLPH 786 ++#define MACH_TYPE_CPUAT91 787 ++#define MACH_TYPE_REA9200 788 ++#define MACH_TYPE_ACTS_PUNE_SA1110 789 ++#define MACH_TYPE_IXP425 790 ++#define MACH_TYPE_I30030ADS 791 ++#define MACH_TYPE_PERCH 792 ++#define MACH_TYPE_EIS05R1 793 ++#define MACH_TYPE_PEPPERPAD 794 ++#define MACH_TYPE_SB3010 795 ++#define MACH_TYPE_RM9200 796 ++#define MACH_TYPE_DMA03 797 ++#define MACH_TYPE_ROAD_S101 798 ++#define MACH_TYPE_IQ_NEXTGEN_A 799 ++#define MACH_TYPE_IQ_NEXTGEN_B 800 ++#define MACH_TYPE_IQ_NEXTGEN_C 801 ++#define MACH_TYPE_IQ_NEXTGEN_D 802 ++#define MACH_TYPE_IQ_NEXTGEN_E 803 ++#define MACH_TYPE_MALLOW_AT91 804 ++#define MACH_TYPE_CYBERTRACKER_I 805 ++#define MACH_TYPE_GESBC931X 806 ++#define MACH_TYPE_CENTIPAD 807 ++#define MACH_TYPE_ARMSOC 808 ++#define MACH_TYPE_SE4200 809 ++#define MACH_TYPE_EMS197A 810 ++#define MACH_TYPE_MICRO9 811 ++#define MACH_TYPE_MICRO9L 812 ++#define MACH_TYPE_UC5471DSP 813 ++#define MACH_TYPE_SJ5471ENG 814 ++#define MACH_TYPE_CMPXA26X 815 ++#define MACH_TYPE_NC 816 ++#define MACH_TYPE_OMAP_PALMTE 817 ++#define MACH_TYPE_AJAX52X 818 ++#define MACH_TYPE_SIRIUSTAR 819 ++#define MACH_TYPE_IODATA_HDLG 820 ++#define MACH_TYPE_AT91RM9200UTL 821 ++#define MACH_TYPE_BIOSAFE 822 ++#define MACH_TYPE_MP1000 823 ++#define MACH_TYPE_PARSY 824 ++#define MACH_TYPE_CCXP 825 ++#define MACH_TYPE_OMAP_GSAMPLE 826 ++#define MACH_TYPE_REALVIEW_EB 827 ++#define MACH_TYPE_SAMOA 828 ++#define MACH_TYPE_T3XSCALE 829 ++#define MACH_TYPE_I878 830 ++#define MACH_TYPE_BORZOI 831 ++#define MACH_TYPE_GECKO 832 ++#define MACH_TYPE_DS101 833 ++#define MACH_TYPE_OMAP_PALMTT2 834 ++#define MACH_TYPE_XSCALE_PALMLD 835 ++#define MACH_TYPE_CC9C 836 ++#define MACH_TYPE_SBC1670 837 ++#define MACH_TYPE_IXDP28X5 838 ++#define MACH_TYPE_OMAP_PALMTT 839 ++#define MACH_TYPE_ML696K 840 ++#define MACH_TYPE_ARCOM_ZEUS 841 ++#define MACH_TYPE_OSIRIS 842 ++#define MACH_TYPE_MAESTRO 843 ++#define MACH_TYPE_TUNGE2 844 ++#define MACH_TYPE_IXBBM 845 ++#define MACH_TYPE_MX27 846 ++#define MACH_TYPE_AX8004 847 ++#define MACH_TYPE_AT91SAM9261EK 848 ++#define MACH_TYPE_LOFT 849 ++#define MACH_TYPE_MAGPIE 850 ++#define MACH_TYPE_MX21 851 ++#define MACH_TYPE_MB87M3400 852 ++#define MACH_TYPE_MGUARD_DELTA 853 ++#define MACH_TYPE_DAVINCI_DVDP 854 ++#define MACH_TYPE_HTCUNIVERSAL 855 ++#define MACH_TYPE_TPAD 856 ++#define MACH_TYPE_ROVERP3 857 ++#define MACH_TYPE_JORNADA928 858 ++#define MACH_TYPE_MV88FXX81 859 ++#define MACH_TYPE_STMP36XX 860 ++#define MACH_TYPE_SXNI79524 861 ++#define MACH_TYPE_AMS_DELTA 862 ++#define MACH_TYPE_URANIUM 863 ++#define MACH_TYPE_UCON 864 ++#define MACH_TYPE_NAS100D 865 ++#define MACH_TYPE_L083_1000 866 ++#define MACH_TYPE_EZX 867 ++#define MACH_TYPE_PNX5220 868 ++#define MACH_TYPE_BUTTE 869 ++#define MACH_TYPE_SRM2 870 ++#define MACH_TYPE_DSBR 871 ++#define MACH_TYPE_CRYSTALBALL 872 ++#define MACH_TYPE_TINYPXA27X 873 ++#define MACH_TYPE_HERBIE 874 ++#define MACH_TYPE_MAGICIAN 875 ++#define MACH_TYPE_CM4002 876 ++#define MACH_TYPE_B4 877 ++#define MACH_TYPE_MAUI 878 ++#define MACH_TYPE_CYBERTRACKER_G 879 ++#define MACH_TYPE_NXDKN 880 ++#define MACH_TYPE_MIO8390 881 ++#define MACH_TYPE_OMI_BOARD 882 ++#define MACH_TYPE_MX21CIV 883 ++#define MACH_TYPE_MAHI_CDAC 884 ++#define MACH_TYPE_XSCALE_PALMTX 885 ++#define MACH_TYPE_S3C2413 887 ++#define MACH_TYPE_SAMSYS_EP0 888 ++#define MACH_TYPE_WG302V1 889 ++#define MACH_TYPE_WG302V2 890 ++#define MACH_TYPE_EB42X 891 ++#define MACH_TYPE_IQ331ES 892 ++#define MACH_TYPE_COSYDSP 893 ++#define MACH_TYPE_UPLAT7D 894 ++#define MACH_TYPE_PTDAVINCI 895 ++#define MACH_TYPE_MBUS 896 ++#define MACH_TYPE_NADIA2VB 897 ++#define MACH_TYPE_R1000 898 ++#define MACH_TYPE_HW90250 899 ++#define MACH_TYPE_OMAP_2430SDP 900 ++#define MACH_TYPE_DAVINCI_EVM 901 ++#define MACH_TYPE_OMAP_TORNADO 902 ++#define MACH_TYPE_OLOCREEK 903 ++#define MACH_TYPE_PALMZ72 904 ++#define MACH_TYPE_NXDB500 905 ++#define MACH_TYPE_APF9328 906 ++#define MACH_TYPE_OMAP_WIPOQ 907 ++#define MACH_TYPE_OMAP_TWIP 908 ++#define MACH_TYPE_XSCALE_PALMTREO650 909 ++#define MACH_TYPE_ACUMEN 910 ++#define MACH_TYPE_XP100 911 ++#define MACH_TYPE_FS2410 912 ++#define MACH_TYPE_PXA270_CERF 913 ++#define MACH_TYPE_SQ2FTLPALM 914 ++#define MACH_TYPE_BSEMSERVER 915 ++#define MACH_TYPE_NETCLIENT 916 ++#define MACH_TYPE_XSCALE_PALMTT5 917 ++#define MACH_TYPE_OMAP_PALMTC 918 ++#define MACH_TYPE_OMAP_APOLLON 919 ++#define MACH_TYPE_MXC30030EVB 920 ++#define MACH_TYPE_REA_2D 921 ++#define MACH_TYPE_TI3E524 922 ++#define MACH_TYPE_ATEB9200 923 ++#define MACH_TYPE_AUCKLAND 924 ++#define MACH_TYPE_AK3320M 925 ++#define MACH_TYPE_DURAMAX 926 ++#define MACH_TYPE_N35 927 ++#define MACH_TYPE_PRONGHORN 928 ++#define MACH_TYPE_FUNDY 929 ++#define MACH_TYPE_LOGICPD_PXA270 930 ++#define MACH_TYPE_CPU777 931 ++#define MACH_TYPE_SIMICON9201 932 ++#define MACH_TYPE_LEAP2_HPM 933 ++#define MACH_TYPE_CM922TXA10 934 ++#define MACH_TYPE_PXA 935 ++#define MACH_TYPE_SANDGATE2 936 ++#define MACH_TYPE_SANDGATE2G 937 ++#define MACH_TYPE_SANDGATE2P 938 ++#define MACH_TYPE_FRED_JACK 939 ++#define MACH_TYPE_TTG_COLOR1 940 ++#define MACH_TYPE_NXEB500HMI 941 ++#define MACH_TYPE_NETDCU8 942 ++#define MACH_TYPE_ML675050_CPU_BOA 943 ++#define MACH_TYPE_NG_FVX538 944 ++#define MACH_TYPE_NG_FVS338 945 ++#define MACH_TYPE_PNX4103 946 ++#define MACH_TYPE_HESDB 947 ++#define MACH_TYPE_XSILO 948 ++#define MACH_TYPE_ESPRESSO 949 ++#define MACH_TYPE_EMLC 950 ++#define MACH_TYPE_SISTERON 951 ++#define MACH_TYPE_RX1950 952 ++#define MACH_TYPE_TSC_VENUS 953 ++#define MACH_TYPE_DS101J 954 ++#define MACH_TYPE_MXC30030ADS 955 ++#define MACH_TYPE_FUJITSU_WIMAXSOC 956 ++#define MACH_TYPE_DUALPCMODEM 957 ++#define MACH_TYPE_GESBC9312 958 ++#define MACH_TYPE_HTCAPACHE 959 ++#define MACH_TYPE_IXDP435 960 ++#define MACH_TYPE_CATPROVT100 961 ++#define MACH_TYPE_PICOTUX1XX 962 ++#define MACH_TYPE_PICOTUX2XX 963 ++#define MACH_TYPE_DSMG600 964 ++#define MACH_TYPE_EMPC2 965 ++#define MACH_TYPE_VENTURA 966 ++#define MACH_TYPE_PHIDGET_SBC 967 ++#define MACH_TYPE_IJ3K 968 ++#define MACH_TYPE_PISGAH 969 ++#define MACH_TYPE_OMAP_FSAMPLE 970 ++#define MACH_TYPE_SG720 971 ++#define MACH_TYPE_REDFOX 972 ++#define MACH_TYPE_MYSH_EP9315_1 973 ++#define MACH_TYPE_TPF106 974 ++#define MACH_TYPE_AT91RM9200KG 975 ++#define MACH_TYPE_SLEDB 976 ++#define MACH_TYPE_ONTRACK 977 ++#define MACH_TYPE_PM1200 978 ++#define MACH_TYPE_ESS24XXX 979 ++#define MACH_TYPE_COREMP7 980 ++#define MACH_TYPE_NEXCODER_6446 981 ++#define MACH_TYPE_STVC8380 982 ++#define MACH_TYPE_TEKLYNX 983 ++#define MACH_TYPE_CARBONADO 984 ++#define MACH_TYPE_SYSMOS_MP730 985 ++#define MACH_TYPE_SNAPPER_CL15 986 ++#define MACH_TYPE_PGIGIM 987 ++#define MACH_TYPE_PTX9160P2 988 ++#define MACH_TYPE_DCORE1 989 ++#define MACH_TYPE_VICTORPXA 990 ++#define MACH_TYPE_MX2DTB 991 ++#define MACH_TYPE_PXA_IREX_ER0100 992 ++#define MACH_TYPE_OMAP_PALMZ71 993 ++#define MACH_TYPE_BARTEC_DEG 994 ++#define MACH_TYPE_HW50251 995 ++#define MACH_TYPE_IBOX 996 ++#define MACH_TYPE_ATLASLH7A404 997 ++#define MACH_TYPE_PT2026 998 ++#define MACH_TYPE_HTCALPINE 999 ++#define MACH_TYPE_BARTEC_VTU 1000 ++#define MACH_TYPE_VCOREII 1001 ++#define MACH_TYPE_PDNB3 1002 ++#define MACH_TYPE_HTCBEETLES 1003 ++#define MACH_TYPE_S3C6400 1004 ++#define MACH_TYPE_S3C2443 1005 ++#define MACH_TYPE_OMAP_LDK 1006 ++#define MACH_TYPE_SMDK2460 1007 ++#define MACH_TYPE_SMDK2440 1008 ++#define MACH_TYPE_SMDK2412 1009 ++#define MACH_TYPE_WEBBOX 1010 ++#define MACH_TYPE_CWWNDP 1011 ++#define MACH_TYPE_DRAGON 1012 ++#define MACH_TYPE_OPENDO_CPU_BOARD 1013 ++#define MACH_TYPE_CCM2200 1014 ++#define MACH_TYPE_ETWARM 1015 ++#define MACH_TYPE_M93030 1016 ++#define MACH_TYPE_CC7U 1017 ++#define MACH_TYPE_MTT_RANGER 1018 ++#define MACH_TYPE_NEXUS 1019 ++#define MACH_TYPE_DESMAN 1020 ++#define MACH_TYPE_BKDE303 1021 ++#define MACH_TYPE_SMDK2413 1022 ++#define MACH_TYPE_AML_M7200 1023 ++#define MACH_TYPE_AML_M5900 1024 ++#define MACH_TYPE_SG640 1025 ++#define MACH_TYPE_EDG79524 1026 ++#define MACH_TYPE_AI2410 1027 ++#define MACH_TYPE_IXP465 1028 ++#define MACH_TYPE_BALLOON3 1029 ++#define MACH_TYPE_HEINS 1030 ++#define MACH_TYPE_MPLUSEVA 1031 ++#define MACH_TYPE_RT042 1032 ++#define MACH_TYPE_CWIEM 1033 ++#define MACH_TYPE_CM_X270 1034 ++#define MACH_TYPE_CM_X255 1035 ++#define MACH_TYPE_ESH_AT91 1036 ++#define MACH_TYPE_SANDGATE3 1037 ++#define MACH_TYPE_PRIMO 1038 ++#define MACH_TYPE_GEMSTONE 1039 ++#define MACH_TYPE_PRONGHORNMETRO 1040 ++#define MACH_TYPE_SIDEWINDER 1041 ++#define MACH_TYPE_PICOMOD1 1042 ++#define MACH_TYPE_SG590 1043 ++#define MACH_TYPE_AKAI9307 1044 ++#define MACH_TYPE_FONTAINE 1045 ++#define MACH_TYPE_WOMBAT 1046 ++#define MACH_TYPE_ACQ300 1047 ++#define MACH_TYPE_MOD_270 1048 ++#define MACH_TYPE_VC0820 1049 ++#define MACH_TYPE_ANI_AIM 1050 ++#define MACH_TYPE_JELLYFISH 1051 ++#define MACH_TYPE_AMANITA 1052 ++#define MACH_TYPE_VLINK 1053 + + #ifdef CONFIG_ARCH_EBSA110 + # ifdef machine_arch_type +@@ -3540,9 +3865,9 @@ + # else + # define machine_arch_type MACH_TYPE_RAMSES + # endif +-# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES) ++# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES) + #else +-# define machine_is_ramses() (0) ++# define machine_is_mnci() (0) + #endif + + #ifdef CONFIG_ARCH_S28X +@@ -4500,9 +4825,9 @@ + # else + # define machine_arch_type MACH_TYPE_M825XX + # endif +-# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX) ++# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX) + #else +-# define machine_is_m825xx() (0) ++# define machine_is_comcerto() (0) + #endif + + #ifdef CONFIG_SA1100_M7100 +@@ -5657,16 +5982,16 @@ + # define machine_is_xcep() (0) + #endif + +-#ifdef CONFIG_MACH_ARCOM_MERCURY ++#ifdef CONFIG_MACH_ARCOM_VULCAN + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_ARCOM_MERCURY ++# define machine_arch_type MACH_TYPE_ARCOM_VULCAN + # endif +-# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY) ++# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN) + #else +-# define machine_is_arcom_mercury() (0) ++# define machine_is_arcom_vulcan() (0) + #endif + + #ifdef CONFIG_MACH_STARGATE +@@ -6053,16 +6378,16 @@ + # define machine_is_ess710() (0) + #endif + +-#ifdef CONFIG_MACH_MX3ADS ++#ifdef CONFIG_MACH_MX31ADS + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_MX3ADS ++# define machine_arch_type MACH_TYPE_MX31ADS + # endif +-# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS) ++# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS) + #else +-# define machine_is_mx3ads() (0) ++# define machine_is_mx31ads() (0) + #endif + + #ifdef CONFIG_MACH_HIMALAYA +@@ -7325,28 +7650,28 @@ + # define machine_is_saturn() (0) + #endif + +-#ifdef CONFIG_MACH_ARGONPLUSEVB ++#ifdef CONFIG_MACH_I30030EVB + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_ARGONPLUSEVB ++# define machine_arch_type MACH_TYPE_I30030EVB + # endif +-# define machine_is_argonplusevb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) ++# define machine_is_i30030evb() (machine_arch_type == MACH_TYPE_I30030EVB) + #else +-# define machine_is_argonplusevb() (0) ++# define machine_is_i30030evb() (0) + #endif + +-#ifdef CONFIG_MACH_SCMA11EVB ++#ifdef CONFIG_MACH_MXC27530EVB + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_SCMA11EVB ++# define machine_arch_type MACH_TYPE_MXC27530EVB + # endif +-# define machine_is_scma11evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) ++# define machine_is_mxc27530evb() (machine_arch_type == MACH_TYPE_MXC27530EVB) + #else +-# define machine_is_scma11evb() (0) ++# define machine_is_mxc27530evb() (0) + #endif + + #ifdef CONFIG_MACH_SMDK2800 +@@ -8297,16 +8622,16 @@ + # define machine_is_hrdisplay() (0) + #endif + +-#ifdef CONFIG_MACH_SCMA11BB ++#ifdef CONFIG_MACH_MXC27530ADS + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_SCMA11BB ++# define machine_arch_type MACH_TYPE_MXC27530ADS + # endif +-# define machine_is_scma11bb() (machine_arch_type == MACH_TYPE_SCMA11BB) ++# define machine_is_mxc27530ads() (machine_arch_type == MACH_TYPE_MXC27530ADS) + #else +-# define machine_is_scma11bb() (0) ++# define machine_is_mxc27530ads() (0) + #endif + + #ifdef CONFIG_MACH_TRIZEPS3 +@@ -9185,16 +9510,16 @@ + # define machine_is_hx2750() (0) + #endif + +-#ifdef CONFIG_MACH_ZEUSEVB ++#ifdef CONFIG_MACH_MXC91131EVB + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_ZEUSEVB ++# define machine_arch_type MACH_TYPE_MXC91131EVB + # endif +-# define machine_is_zeusevb() (machine_arch_type == MACH_TYPE_ZEUSEVB) ++# define machine_is_mxc91131evb() (machine_arch_type == MACH_TYPE_MXC91131EVB) + #else +-# define machine_is_zeusevb() (0) ++# define machine_is_mxc91131evb() (0) + #endif + + #ifdef CONFIG_MACH_P700 +@@ -9401,6 +9726,3906 @@ + # define machine_is_mp2usb() (0) + #endif + ++#ifdef CONFIG_MACH_NTNP425C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NTNP425C ++# endif ++# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C) ++#else ++# define machine_is_ntnp425c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_COLIBRI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_COLIBRI ++# endif ++# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI) ++#else ++# define machine_is_colibri() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PCM7220 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PCM7220 ++# endif ++# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220) ++#else ++# define machine_is_pcm7220() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GATEWAY7001 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GATEWAY7001 ++# endif ++# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001) ++#else ++# define machine_is_gateway7001() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PCM027 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PCM027 ++# endif ++# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027) ++#else ++# define machine_is_pcm027() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CMPXA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CMPXA ++# endif ++# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA) ++#else ++# define machine_is_cmpxa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ANUBIS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ANUBIS ++# endif ++# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS) ++#else ++# define machine_is_anubis() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ITE8152 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ITE8152 ++# endif ++# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152) ++#else ++# define machine_is_ite8152() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LPC3XXX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LPC3XXX ++# endif ++# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX) ++#else ++# define machine_is_lpc3xxx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PUPPETEER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PUPPETEER ++# endif ++# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER) ++#else ++# define machine_is_puppeteer() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MACH_VADATECH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MACH_VADATECH ++# endif ++# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH) ++#else ++# define machine_is_vt001() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E570 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E570 ++# endif ++# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570) ++#else ++# define machine_is_e570() (0) ++#endif ++ ++#ifdef CONFIG_MACH_X50 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_X50 ++# endif ++# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50) ++#else ++# define machine_is_x50() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RECON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RECON ++# endif ++# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON) ++#else ++# define machine_is_recon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XBOARDGP8 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XBOARDGP8 ++# endif ++# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8) ++#else ++# define machine_is_xboardgp8() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FPIC2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FPIC2 ++# endif ++# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2) ++#else ++# define machine_is_fpic2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AKITA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AKITA ++# endif ++# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA) ++#else ++# define machine_is_akita() (0) ++#endif ++ ++#ifdef CONFIG_MACH_A81 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_A81 ++# endif ++# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81) ++#else ++# define machine_is_a81() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SVM_SC25X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SVM_SC25X ++# endif ++# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X) ++#else ++# define machine_is_svm_sc25x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VADATECH020 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VADATECH020 ++# endif ++# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020) ++#else ++# define machine_is_vt020() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TLI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TLI ++# endif ++# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI) ++#else ++# define machine_is_tli() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EDB9315LC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EDB9315LC ++# endif ++# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC) ++#else ++# define machine_is_edb9315lc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PASSEC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PASSEC ++# endif ++# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC) ++#else ++# define machine_is_passec() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS_TIGER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS_TIGER ++# endif ++# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER) ++#else ++# define machine_is_ds_tiger() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E310 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E310 ++# endif ++# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310) ++#else ++# define machine_is_e310() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E330 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E330 ++# endif ++# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330) ++#else ++# define machine_is_e330() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RT3000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RT3000 ++# endif ++# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000) ++#else ++# define machine_is_rt3000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NOKIA770 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NOKIA770 ++# endif ++# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770) ++#else ++# define machine_is_nokia770() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX0106 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX0106 ++# endif ++# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106) ++#else ++# define machine_is_pnx0106() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HX21XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HX21XX ++# endif ++# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX) ++#else ++# define machine_is_hx21xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FARADAY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FARADAY ++# endif ++# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY) ++#else ++# define machine_is_faraday() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SBC9312 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SBC9312 ++# endif ++# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312) ++#else ++# define machine_is_sbc9312() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BATMAN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BATMAN ++# endif ++# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN) ++#else ++# define machine_is_batman() (0) ++#endif ++ ++#ifdef CONFIG_MACH_JPD201 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_JPD201 ++# endif ++# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201) ++#else ++# define machine_is_jpd201() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MIPSA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MIPSA ++# endif ++# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA) ++#else ++# define machine_is_mipsa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_KACOM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_KACOM ++# endif ++# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM) ++#else ++# define machine_is_kacom() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SWARCOCPU ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SWARCOCPU ++# endif ++# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU) ++#else ++# define machine_is_swarcocpu() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SWARCODSL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SWARCODSL ++# endif ++# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL) ++#else ++# define machine_is_swarcodsl() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BLUEANGEL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BLUEANGEL ++# endif ++# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL) ++#else ++# define machine_is_blueangel() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HAIRYGRAMA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HAIRYGRAMA ++# endif ++# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA) ++#else ++# define machine_is_hairygrama() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BANFF ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BANFF ++# endif ++# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF) ++#else ++# define machine_is_banff() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CARMEVA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CARMEVA ++# endif ++# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA) ++#else ++# define machine_is_carmeva() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAM255 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAM255 ++# endif ++# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255) ++#else ++# define machine_is_sam255() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PPM10 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PPM10 ++# endif ++# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10) ++#else ++# define machine_is_ppm10() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EDB9315A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EDB9315A ++# endif ++# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A) ++#else ++# define machine_is_edb9315a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SUNSET ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SUNSET ++# endif ++# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET) ++#else ++# define machine_is_sunset() (0) ++#endif ++ ++#ifdef CONFIG_MACH_STARGATE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_STARGATE2 ++# endif ++# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2) ++#else ++# define machine_is_stargate2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_INTELMOTE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_INTELMOTE2 ++# endif ++# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2) ++#else ++# define machine_is_intelmote2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TRIZEPS4 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TRIZEPS4 ++# endif ++# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4) ++#else ++# define machine_is_trizeps4() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAINSTONE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAINSTONE2 ++# endif ++# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2) ++#else ++# define machine_is_mainstone2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZ_IXP42X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZ_IXP42X ++# endif ++# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X) ++#else ++# define machine_is_ez_ixp42x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TAPWAVE_ZODIAC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC ++# endif ++# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC) ++#else ++# define machine_is_tapwave_zodiac() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UNIVERSALMETER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UNIVERSALMETER ++# endif ++# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER) ++#else ++# define machine_is_universalmeter() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HICOARM9 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HICOARM9 ++# endif ++# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9) ++#else ++# define machine_is_hicoarm9() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX4008 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX4008 ++# endif ++# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008) ++#else ++# define machine_is_pnx4008() (0) ++#endif ++ ++#ifdef CONFIG_MACH_KWS6000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_KWS6000 ++# endif ++# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000) ++#else ++# define machine_is_kws6000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PORTUX920T ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PORTUX920T ++# endif ++# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T) ++#else ++# define machine_is_portux920t() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZ_X5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZ_X5 ++# endif ++# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5) ++#else ++# define machine_is_ez_x5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_RUDOLPH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH ++# endif ++# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH) ++#else ++# define machine_is_omap_rudolph() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CPUAT91 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CPUAT91 ++# endif ++# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91) ++#else ++# define machine_is_cpuat91() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REA9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REA9200 ++# endif ++# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200) ++#else ++# define machine_is_rea9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ACTS_PUNE_SA1110 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110 ++# endif ++# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110) ++#else ++# define machine_is_acts_pune_sa1110() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXP425 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXP425 ++# endif ++# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425) ++#else ++# define machine_is_ixp425() (0) ++#endif ++ ++#ifdef CONFIG_MACH_I30030ADS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_I30030ADS ++# endif ++# define machine_is_i30030ads() (machine_arch_type == MACH_TYPE_I30030ADS) ++#else ++# define machine_is_i30030ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PERCH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PERCH ++# endif ++# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH) ++#else ++# define machine_is_perch() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EIS05R1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EIS05R1 ++# endif ++# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1) ++#else ++# define machine_is_eis05r1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PEPPERPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PEPPERPAD ++# endif ++# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD) ++#else ++# define machine_is_pepperpad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SB3010 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SB3010 ++# endif ++# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010) ++#else ++# define machine_is_sb3010() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RM9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RM9200 ++# endif ++# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200) ++#else ++# define machine_is_rm9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DMA03 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DMA03 ++# endif ++# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03) ++#else ++# define machine_is_dma03() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ROAD_S101 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ROAD_S101 ++# endif ++# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101) ++#else ++# define machine_is_road_s101() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A ++# endif ++# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A) ++#else ++# define machine_is_iq_nextgen_a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_B ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B ++# endif ++# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B) ++#else ++# define machine_is_iq_nextgen_b() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C ++# endif ++# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C) ++#else ++# define machine_is_iq_nextgen_c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D ++# endif ++# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D) ++#else ++# define machine_is_iq_nextgen_d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_E ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E ++# endif ++# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E) ++#else ++# define machine_is_iq_nextgen_e() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MALLOW_AT91 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MALLOW_AT91 ++# endif ++# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91) ++#else ++# define machine_is_mallow_at91() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CYBERTRACKER_I ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CYBERTRACKER_I ++# endif ++# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I) ++#else ++# define machine_is_cybertracker_i() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GESBC931X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GESBC931X ++# endif ++# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X) ++#else ++# define machine_is_gesbc931x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CENTIPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CENTIPAD ++# endif ++# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD) ++#else ++# define machine_is_centipad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARMSOC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARMSOC ++# endif ++# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC) ++#else ++# define machine_is_armsoc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SE4200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SE4200 ++# endif ++# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200) ++#else ++# define machine_is_se4200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EMS197A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EMS197A ++# endif ++# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A) ++#else ++# define machine_is_ems197a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MICRO9 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MICRO9 ++# endif ++# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9) ++#else ++# define machine_is_micro9() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MICRO9L ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MICRO9L ++# endif ++# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L) ++#else ++# define machine_is_micro9l() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UC5471DSP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UC5471DSP ++# endif ++# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP) ++#else ++# define machine_is_uc5471dsp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SJ5471ENG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SJ5471ENG ++# endif ++# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG) ++#else ++# define machine_is_sj5471eng() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CMPXA26X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CMPXA26X ++# endif ++# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X) ++#else ++# define machine_is_none() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NC ++# endif ++# define machine_is_nc1() (machine_arch_type == MACH_TYPE_NC) ++#else ++# define machine_is_nc1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTE ++# endif ++# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE) ++#else ++# define machine_is_omap_palmte() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AJAX52X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AJAX52X ++# endif ++# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X) ++#else ++# define machine_is_ajax52x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SIRIUSTAR ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SIRIUSTAR ++# endif ++# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR) ++#else ++# define machine_is_siriustar() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IODATA_HDLG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IODATA_HDLG ++# endif ++# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG) ++#else ++# define machine_is_iodata_hdlg() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91RM9200UTL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91RM9200UTL ++# endif ++# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL) ++#else ++# define machine_is_at91rm9200utl() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BIOSAFE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BIOSAFE ++# endif ++# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE) ++#else ++# define machine_is_biosafe() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MP1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MP1000 ++# endif ++# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000) ++#else ++# define machine_is_mp1000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PARSY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PARSY ++# endif ++# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY) ++#else ++# define machine_is_parsy() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CCXP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CCXP ++# endif ++# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP) ++#else ++# define machine_is_ccxp270() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_GSAMPLE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE ++# endif ++# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE) ++#else ++# define machine_is_omap_gsample() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REALVIEW_EB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REALVIEW_EB ++# endif ++# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB) ++#else ++# define machine_is_realview_eb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAMOA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAMOA ++# endif ++# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA) ++#else ++# define machine_is_samoa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_T3XSCALE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_T3XSCALE ++# endif ++# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE) ++#else ++# define machine_is_t3xscale() (0) ++#endif ++ ++#ifdef CONFIG_MACH_I878 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_I878 ++# endif ++# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878) ++#else ++# define machine_is_i878() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BORZOI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BORZOI ++# endif ++# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI) ++#else ++# define machine_is_borzoi() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GECKO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GECKO ++# endif ++# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO) ++#else ++# define machine_is_gecko() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS101 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS101 ++# endif ++# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101) ++#else ++# define machine_is_ds101() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTT2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTT2 ++# endif ++# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2) ++#else ++# define machine_is_omap_palmtt2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMLD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMLD ++# endif ++# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD) ++#else ++# define machine_is_xscale_palmld() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CC9C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CC9C ++# endif ++# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C) ++#else ++# define machine_is_cc9c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SBC1670 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SBC1670 ++# endif ++# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670) ++#else ++# define machine_is_sbc1670() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXDP28X5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXDP28X5 ++# endif ++# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5) ++#else ++# define machine_is_ixdp28x5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTT ++# endif ++# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT) ++#else ++# define machine_is_omap_palmtt() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ML696K ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ML696K ++# endif ++# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K) ++#else ++# define machine_is_ml696k() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARCOM_ZEUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARCOM_ZEUS ++# endif ++# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS) ++#else ++# define machine_is_arcom_zeus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OSIRIS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OSIRIS ++# endif ++# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS) ++#else ++# define machine_is_osiris() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAESTRO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAESTRO ++# endif ++# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO) ++#else ++# define machine_is_maestro() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TUNGE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TUNGE2 ++# endif ++# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2) ++#else ++# define machine_is_tunge2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXBBM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXBBM ++# endif ++# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM) ++#else ++# define machine_is_ixbbm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX27 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX27 ++# endif ++# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27) ++#else ++# define machine_is_mx27ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AX8004 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AX8004 ++# endif ++# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004) ++#else ++# define machine_is_ax8004() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9261EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9261EK ++# endif ++# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK) ++#else ++# define machine_is_at91sam9261ek() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LOFT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LOFT ++# endif ++# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT) ++#else ++# define machine_is_loft() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAGPIE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAGPIE ++# endif ++# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE) ++#else ++# define machine_is_magpie() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX21 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX21 ++# endif ++# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21) ++#else ++# define machine_is_mx21ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MB87M3400 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MB87M3400 ++# endif ++# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400) ++#else ++# define machine_is_mb87m3400() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MGUARD_DELTA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MGUARD_DELTA ++# endif ++# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA) ++#else ++# define machine_is_mguard_delta() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DAVINCI_DVDP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DAVINCI_DVDP ++# endif ++# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP) ++#else ++# define machine_is_davinci_dvdp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCUNIVERSAL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCUNIVERSAL ++# endif ++# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL) ++#else ++# define machine_is_htcuniversal() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TPAD ++# endif ++# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD) ++#else ++# define machine_is_tpad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ROVERP3 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ROVERP3 ++# endif ++# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3) ++#else ++# define machine_is_roverp3() (0) ++#endif ++ ++#ifdef CONFIG_MACH_JORNADA928 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_JORNADA928 ++# endif ++# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928) ++#else ++# define machine_is_jornada928() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MV88FXX81 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MV88FXX81 ++# endif ++# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81) ++#else ++# define machine_is_mv88fxx81() (0) ++#endif ++ ++#ifdef CONFIG_MACH_STMP36XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_STMP36XX ++# endif ++# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX) ++#else ++# define machine_is_stmp36xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SXNI79524 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SXNI79524 ++# endif ++# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524) ++#else ++# define machine_is_sxni79524() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AMS_DELTA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AMS_DELTA ++# endif ++# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA) ++#else ++# define machine_is_ams_delta() (0) ++#endif ++ ++#ifdef CONFIG_MACH_URANIUM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_URANIUM ++# endif ++# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM) ++#else ++# define machine_is_uranium() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UCON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UCON ++# endif ++# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON) ++#else ++# define machine_is_ucon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NAS100D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NAS100D ++# endif ++# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D) ++#else ++# define machine_is_nas100d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_L083_1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_L083_1000 ++# endif ++# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000) ++#else ++# define machine_is_l083() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZX ++# endif ++# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX) ++#else ++# define machine_is_ezx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX5220 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX5220 ++# endif ++# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220) ++#else ++# define machine_is_pnx5220() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BUTTE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BUTTE ++# endif ++# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE) ++#else ++# define machine_is_butte() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SRM2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SRM2 ++# endif ++# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2) ++#else ++# define machine_is_srm2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DSBR ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DSBR ++# endif ++# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR) ++#else ++# define machine_is_dsbr() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CRYSTALBALL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CRYSTALBALL ++# endif ++# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL) ++#else ++# define machine_is_crystalball() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TINYPXA27X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TINYPXA27X ++# endif ++# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X) ++#else ++# define machine_is_tinypxa27x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HERBIE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HERBIE ++# endif ++# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE) ++#else ++# define machine_is_herbie() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAGICIAN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAGICIAN ++# endif ++# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN) ++#else ++# define machine_is_magician() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CM4002 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CM4002 ++# endif ++# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002) ++#else ++# define machine_is_cm4002() (0) ++#endif ++ ++#ifdef CONFIG_MACH_B4 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_B4 ++# endif ++# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4) ++#else ++# define machine_is_b4() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAUI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAUI ++# endif ++# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI) ++#else ++# define machine_is_maui() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CYBERTRACKER_G ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CYBERTRACKER_G ++# endif ++# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G) ++#else ++# define machine_is_cybertracker_g() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXDKN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXDKN ++# endif ++# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN) ++#else ++# define machine_is_nxdkn() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MIO8390 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MIO8390 ++# endif ++# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390) ++#else ++# define machine_is_mio8390() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMI_BOARD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMI_BOARD ++# endif ++# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD) ++#else ++# define machine_is_omi_board() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX21CIV ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX21CIV ++# endif ++# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV) ++#else ++# define machine_is_mx21civ() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAHI_CDAC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAHI_CDAC ++# endif ++# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC) ++#else ++# define machine_is_mahi_cdac() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTX ++# endif ++# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX) ++#else ++# define machine_is_xscale_palmtx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_S3C2413 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_S3C2413 ++# endif ++# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413) ++#else ++# define machine_is_s3c2413() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAMSYS_EP0 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAMSYS_EP0 ++# endif ++# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0) ++#else ++# define machine_is_samsys_ep0() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WG302V1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WG302V1 ++# endif ++# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1) ++#else ++# define machine_is_wg302v1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WG302V2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WG302V2 ++# endif ++# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2) ++#else ++# define machine_is_wg302v2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EB42X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EB42X ++# endif ++# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X) ++#else ++# define machine_is_eb42x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ331ES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ331ES ++# endif ++# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES) ++#else ++# define machine_is_iq331es() (0) ++#endif ++ ++#ifdef CONFIG_MACH_COSYDSP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_COSYDSP ++# endif ++# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP) ++#else ++# define machine_is_cosydsp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UPLAT7D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UPLAT7D ++# endif ++# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D) ++#else ++# define machine_is_uplat7d_proto() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PTDAVINCI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PTDAVINCI ++# endif ++# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI) ++#else ++# define machine_is_ptdavinci() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MBUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MBUS ++# endif ++# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS) ++#else ++# define machine_is_mbus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NADIA2VB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NADIA2VB ++# endif ++# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB) ++#else ++# define machine_is_nadia2vb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_R1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_R1000 ++# endif ++# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000) ++#else ++# define machine_is_r1000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HW90250 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HW90250 ++# endif ++# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250) ++#else ++# define machine_is_hw90250() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_2430SDP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_2430SDP ++# endif ++# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP) ++#else ++# define machine_is_omap_2430sdp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DAVINCI_EVM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DAVINCI_EVM ++# endif ++# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM) ++#else ++# define machine_is_davinci_evm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_TORNADO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_TORNADO ++# endif ++# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO) ++#else ++# define machine_is_omap_tornado() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OLOCREEK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OLOCREEK ++# endif ++# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK) ++#else ++# define machine_is_olocreek() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PALMZ72 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PALMZ72 ++# endif ++# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72) ++#else ++# define machine_is_palmz72() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXDB500 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXDB500 ++# endif ++# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500) ++#else ++# define machine_is_nxdb500() (0) ++#endif ++ ++#ifdef CONFIG_MACH_APF9328 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_APF9328 ++# endif ++# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328) ++#else ++# define machine_is_apf9328() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_WIPOQ ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_WIPOQ ++# endif ++# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ) ++#else ++# define machine_is_omap_wipoq() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_TWIP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_TWIP ++# endif ++# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP) ++#else ++# define machine_is_omap_twip() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTREO650 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650 ++# endif ++# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650) ++#else ++# define machine_is_xscale_treo650() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ACUMEN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ACUMEN ++# endif ++# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN) ++#else ++# define machine_is_acumen() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XP100 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XP100 ++# endif ++# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100) ++#else ++# define machine_is_xp100() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FS2410 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FS2410 ++# endif ++# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410) ++#else ++# define machine_is_fs2410() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PXA270_CERF ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PXA270_CERF ++# endif ++# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF) ++#else ++# define machine_is_pxa270_cerf() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SQ2FTLPALM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SQ2FTLPALM ++# endif ++# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM) ++#else ++# define machine_is_sq2ftlpalm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BSEMSERVER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BSEMSERVER ++# endif ++# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER) ++#else ++# define machine_is_bsemserver() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NETCLIENT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NETCLIENT ++# endif ++# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT) ++#else ++# define machine_is_netclient() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTT5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5 ++# endif ++# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5) ++#else ++# define machine_is_xscale_palmtt5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTC ++# endif ++# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC) ++#else ++# define machine_is_xscale_palmtc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_APOLLON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_APOLLON ++# endif ++# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) ++#else ++# define machine_is_omap_apollon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MXC30030EVB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MXC30030EVB ++# endif ++# define machine_is_mxc30030evb() (machine_arch_type == MACH_TYPE_MXC30030EVB) ++#else ++# define machine_is_mxc30030evb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REA_2D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REA_2D ++# endif ++# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D) ++#else ++# define machine_is_rea_2d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TI3E524 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TI3E524 ++# endif ++# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524) ++#else ++# define machine_is_eti3e524() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ATEB9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ATEB9200 ++# endif ++# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200) ++#else ++# define machine_is_ateb9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AUCKLAND ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AUCKLAND ++# endif ++# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND) ++#else ++# define machine_is_auckland() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AK3320M ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AK3320M ++# endif ++# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M) ++#else ++# define machine_is_ak3220m() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DURAMAX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DURAMAX ++# endif ++# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX) ++#else ++# define machine_is_duramax() (0) ++#endif ++ ++#ifdef CONFIG_MACH_N35 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_N35 ++# endif ++# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35) ++#else ++# define machine_is_n35() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PRONGHORN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PRONGHORN ++# endif ++# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN) ++#else ++# define machine_is_pronghorn() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FUNDY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FUNDY ++# endif ++# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY) ++#else ++# define machine_is_fundy() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LOGICPD_PXA270 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LOGICPD_PXA270 ++# endif ++# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270) ++#else ++# define machine_is_logicpd_pxa270() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CPU777 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CPU777 ++# endif ++# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777) ++#else ++# define machine_is_cpu777() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SIMICON9201 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SIMICON9201 ++# endif ++# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201) ++#else ++# define machine_is_simicon9201() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LEAP2_HPM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LEAP2_HPM ++# endif ++# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM) ++#else ++# define machine_is_leap2_hpm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CM922TXA10 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CM922TXA10 ++# endif ++# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10) ++#else ++# define machine_is_cm922txa10() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PXA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PXA ++# endif ++# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA) ++#else ++# define machine_is_sandgate() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2 ++# endif ++# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2) ++#else ++# define machine_is_sandgate2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2G ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2G ++# endif ++# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G) ++#else ++# define machine_is_sandgate2g() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2P ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2P ++# endif ++# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P) ++#else ++# define machine_is_sandgate2p() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FRED_JACK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FRED_JACK ++# endif ++# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK) ++#else ++# define machine_is_fred_jack() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TTG_COLOR1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TTG_COLOR1 ++# endif ++# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1) ++#else ++# define machine_is_ttg_color1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXEB500HMI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXEB500HMI ++# endif ++# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI) ++#else ++# define machine_is_nxeb500hmi() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NETDCU8 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NETDCU8 ++# endif ++# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8) ++#else ++# define machine_is_netdcu8() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ML675050_CPU_BOA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA ++# endif ++# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA) ++#else ++# define machine_is_ml675050_cpu_boa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NG_FVX538 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NG_FVX538 ++# endif ++# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538) ++#else ++# define machine_is_ng_fvx538() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NG_FVS338 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NG_FVS338 ++# endif ++# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338) ++#else ++# define machine_is_ng_fvs338() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX4103 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX4103 ++# endif ++# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103) ++#else ++# define machine_is_pnx4103() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HESDB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HESDB ++# endif ++# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB) ++#else ++# define machine_is_hesdb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSILO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSILO ++# endif ++# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO) ++#else ++# define machine_is_xsilo() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ESPRESSO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ESPRESSO ++# endif ++# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO) ++#else ++# define machine_is_espresso() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EMLC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EMLC ++# endif ++# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC) ++#else ++# define machine_is_emlc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SISTERON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SISTERON ++# endif ++# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON) ++#else ++# define machine_is_sisteron() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RX1950 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RX1950 ++# endif ++# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950) ++#else ++# define machine_is_rx1950() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TSC_VENUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TSC_VENUS ++# endif ++# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS) ++#else ++# define machine_is_tsc_venus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS101J ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS101J ++# endif ++# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J) ++#else ++# define machine_is_ds101j() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MXC30030ADS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MXC30030ADS ++# endif ++# define machine_is_mxc30030ads() (machine_arch_type == MACH_TYPE_MXC30030ADS) ++#else ++# define machine_is_mxc30030ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC ++# endif ++# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC) ++#else ++# define machine_is_fujitsu_wimaxsoc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DUALPCMODEM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DUALPCMODEM ++# endif ++# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM) ++#else ++# define machine_is_dualpcmodem() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GESBC9312 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GESBC9312 ++# endif ++# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312) ++#else ++# define machine_is_gesbc9312() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCAPACHE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCAPACHE ++# endif ++# define machine_is_htcapache() (machine_arch_type == MACH_TYPE_HTCAPACHE) ++#else ++# define machine_is_htcapache() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXDP435 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXDP435 ++# endif ++# define machine_is_ixdp435() (machine_arch_type == MACH_TYPE_IXDP435) ++#else ++# define machine_is_ixdp435() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CATPROVT100 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CATPROVT100 ++# endif ++# define machine_is_catprovt100() (machine_arch_type == MACH_TYPE_CATPROVT100) ++#else ++# define machine_is_catprovt100() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PICOTUX1XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PICOTUX1XX ++# endif ++# define machine_is_picotux1xx() (machine_arch_type == MACH_TYPE_PICOTUX1XX) ++#else ++# define machine_is_picotux1xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PICOTUX2XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PICOTUX2XX ++# endif ++# define machine_is_picotux2xx() (machine_arch_type == MACH_TYPE_PICOTUX2XX) ++#else ++# define machine_is_picotux2xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DSMG600 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DSMG600 ++# endif ++# define machine_is_dsmg600() (machine_arch_type == MACH_TYPE_DSMG600) ++#else ++# define machine_is_dsmg600() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EMPC2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EMPC2 ++# endif ++# define machine_is_empc2() (machine_arch_type == MACH_TYPE_EMPC2) ++#else ++# define machine_is_empc2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VENTURA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VENTURA ++# endif ++# define machine_is_ventura() (machine_arch_type == MACH_TYPE_VENTURA) ++#else ++# define machine_is_ventura() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PHIDGET_SBC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PHIDGET_SBC ++# endif ++# define machine_is_phidget_sbc() (machine_arch_type == MACH_TYPE_PHIDGET_SBC) ++#else ++# define machine_is_phidget_sbc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IJ3K ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IJ3K ++# endif ++# define machine_is_ij3k() (machine_arch_type == MACH_TYPE_IJ3K) ++#else ++# define machine_is_ij3k() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PISGAH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PISGAH ++# endif ++# define machine_is_pisgah() (machine_arch_type == MACH_TYPE_PISGAH) ++#else ++# define machine_is_pisgah() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_FSAMPLE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_FSAMPLE ++# endif ++# define machine_is_omap_fsample() (machine_arch_type == MACH_TYPE_OMAP_FSAMPLE) ++#else ++# define machine_is_omap_fsample() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SG720 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SG720 ++# endif ++# define machine_is_sg720() (machine_arch_type == MACH_TYPE_SG720) ++#else ++# define machine_is_sg720() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REDFOX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REDFOX ++# endif ++# define machine_is_redfox() (machine_arch_type == MACH_TYPE_REDFOX) ++#else ++# define machine_is_redfox() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MYSH_EP9315_1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MYSH_EP9315_1 ++# endif ++# define machine_is_mysh_ep9315_1() (machine_arch_type == MACH_TYPE_MYSH_EP9315_1) ++#else ++# define machine_is_mysh_ep9315_1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TPF106 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TPF106 ++# endif ++# define machine_is_tpf106() (machine_arch_type == MACH_TYPE_TPF106) ++#else ++# define machine_is_tpf106() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91RM9200KG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91RM9200KG ++# endif ++# define machine_is_at91rm9200kg() (machine_arch_type == MACH_TYPE_AT91RM9200KG) ++#else ++# define machine_is_at91rm9200kg() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SLEDB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SLEDB ++# endif ++# define machine_is_racemt2() (machine_arch_type == MACH_TYPE_SLEDB) ++#else ++# define machine_is_racemt2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ONTRACK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ONTRACK ++# endif ++# define machine_is_ontrack() (machine_arch_type == MACH_TYPE_ONTRACK) ++#else ++# define machine_is_ontrack() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PM1200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PM1200 ++# endif ++# define machine_is_pm1200() (machine_arch_type == MACH_TYPE_PM1200) ++#else ++# define machine_is_pm1200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ESS24XXX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ESS24XXX ++# endif ++# define machine_is_ess24562() (machine_arch_type == MACH_TYPE_ESS24XXX) ++#else ++# define machine_is_ess24562() (0) ++#endif ++ ++#ifdef CONFIG_MACH_COREMP7 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_COREMP7 ++# endif ++# define machine_is_coremp7() (machine_arch_type == MACH_TYPE_COREMP7) ++#else ++# define machine_is_coremp7() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NEXCODER_6446 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NEXCODER_6446 ++# endif ++# define machine_is_nexcoder_6446() (machine_arch_type == MACH_TYPE_NEXCODER_6446) ++#else ++# define machine_is_nexcoder_6446() (0) ++#endif ++ ++#ifdef CONFIG_MACH_STVC8380 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_STVC8380 ++# endif ++# define machine_is_stvc8380() (machine_arch_type == MACH_TYPE_STVC8380) ++#else ++# define machine_is_stvc8380() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TEKLYNX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TEKLYNX ++# endif ++# define machine_is_teklynx() (machine_arch_type == MACH_TYPE_TEKLYNX) ++#else ++# define machine_is_teklynx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CARBONADO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CARBONADO ++# endif ++# define machine_is_carbonado() (machine_arch_type == MACH_TYPE_CARBONADO) ++#else ++# define machine_is_carbonado() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SYSMOS_MP730 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SYSMOS_MP730 ++# endif ++# define machine_is_sysmos_mp730() (machine_arch_type == MACH_TYPE_SYSMOS_MP730) ++#else ++# define machine_is_sysmos_mp730() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SNAPPER_CL15 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SNAPPER_CL15 ++# endif ++# define machine_is_snapper_cl15() (machine_arch_type == MACH_TYPE_SNAPPER_CL15) ++#else ++# define machine_is_snapper_cl15() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PGIGIM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PGIGIM ++# endif ++# define machine_is_pgigim() (machine_arch_type == MACH_TYPE_PGIGIM) ++#else ++# define machine_is_pgigim() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PTX9160P2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PTX9160P2 ++# endif ++# define machine_is_ptx9160p2() (machine_arch_type == MACH_TYPE_PTX9160P2) ++#else ++# define machine_is_ptx9160p2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DCORE1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DCORE1 ++# endif ++# define machine_is_dcore1() (machine_arch_type == MACH_TYPE_DCORE1) ++#else ++# define machine_is_dcore1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VICTORPXA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VICTORPXA ++# endif ++# define machine_is_victorpxa() (machine_arch_type == MACH_TYPE_VICTORPXA) ++#else ++# define machine_is_victorpxa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX2DTB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX2DTB ++# endif ++# define machine_is_mx2dtb() (machine_arch_type == MACH_TYPE_MX2DTB) ++#else ++# define machine_is_mx2dtb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PXA_IREX_ER0100 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PXA_IREX_ER0100 ++# endif ++# define machine_is_pxa_irex_er0100() (machine_arch_type == MACH_TYPE_PXA_IREX_ER0100) ++#else ++# define machine_is_pxa_irex_er0100() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMZ71 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMZ71 ++# endif ++# define machine_is_omap_palmz71() (machine_arch_type == MACH_TYPE_OMAP_PALMZ71) ++#else ++# define machine_is_omap_palmz71() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BARTEC_DEG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BARTEC_DEG ++# endif ++# define machine_is_bartec_deg() (machine_arch_type == MACH_TYPE_BARTEC_DEG) ++#else ++# define machine_is_bartec_deg() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HW50251 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HW50251 ++# endif ++# define machine_is_hw50251() (machine_arch_type == MACH_TYPE_HW50251) ++#else ++# define machine_is_hw50251() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IBOX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IBOX ++# endif ++# define machine_is_ibox() (machine_arch_type == MACH_TYPE_IBOX) ++#else ++# define machine_is_ibox() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ATLASLH7A404 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ATLASLH7A404 ++# endif ++# define machine_is_atlaslh7a404() (machine_arch_type == MACH_TYPE_ATLASLH7A404) ++#else ++# define machine_is_atlaslh7a404() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PT2026 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PT2026 ++# endif ++# define machine_is_pt2026() (machine_arch_type == MACH_TYPE_PT2026) ++#else ++# define machine_is_pt2026() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCALPINE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCALPINE ++# endif ++# define machine_is_htcalpine() (machine_arch_type == MACH_TYPE_HTCALPINE) ++#else ++# define machine_is_htcalpine() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BARTEC_VTU ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BARTEC_VTU ++# endif ++# define machine_is_bartec_vtu() (machine_arch_type == MACH_TYPE_BARTEC_VTU) ++#else ++# define machine_is_bartec_vtu() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VCOREII ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VCOREII ++# endif ++# define machine_is_vcoreii() (machine_arch_type == MACH_TYPE_VCOREII) ++#else ++# define machine_is_vcoreii() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PDNB3 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PDNB3 ++# endif ++# define machine_is_pdnb3() (machine_arch_type == MACH_TYPE_PDNB3) ++#else ++# define machine_is_pdnb3() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCBEETLES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCBEETLES ++# endif ++# define machine_is_htcbeetles() (machine_arch_type == MACH_TYPE_HTCBEETLES) ++#else ++# define machine_is_htcbeetles() (0) ++#endif ++ ++#ifdef CONFIG_MACH_S3C6400 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_S3C6400 ++# endif ++# define machine_is_s3c6400() (machine_arch_type == MACH_TYPE_S3C6400) ++#else ++# define machine_is_s3c6400() (0) ++#endif ++ ++#ifdef CONFIG_MACH_S3C2443 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_S3C2443 ++# endif ++# define machine_is_s3c2443() (machine_arch_type == MACH_TYPE_S3C2443) ++#else ++# define machine_is_s3c2443() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_LDK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_LDK ++# endif ++# define machine_is_omap_ldk() (machine_arch_type == MACH_TYPE_OMAP_LDK) ++#else ++# define machine_is_omap_ldk() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SMDK2460 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SMDK2460 ++# endif ++# define machine_is_smdk2460() (machine_arch_type == MACH_TYPE_SMDK2460) ++#else ++# define machine_is_smdk2460() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SMDK2440 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SMDK2440 ++# endif ++# define machine_is_smdk2440() (machine_arch_type == MACH_TYPE_SMDK2440) ++#else ++# define machine_is_smdk2440() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SMDK2412 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SMDK2412 ++# endif ++# define machine_is_smdk2412() (machine_arch_type == MACH_TYPE_SMDK2412) ++#else ++# define machine_is_smdk2412() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WEBBOX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WEBBOX ++# endif ++# define machine_is_webbox() (machine_arch_type == MACH_TYPE_WEBBOX) ++#else ++# define machine_is_webbox() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CWWNDP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CWWNDP ++# endif ++# define machine_is_cwwndp() (machine_arch_type == MACH_TYPE_CWWNDP) ++#else ++# define machine_is_cwwndp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DRAGON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DRAGON ++# endif ++# define machine_is_dragon() (machine_arch_type == MACH_TYPE_DRAGON) ++#else ++# define machine_is_dragon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OPENDO_CPU_BOARD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OPENDO_CPU_BOARD ++# endif ++# define machine_is_opendo_cpu_board() (machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD) ++#else ++# define machine_is_opendo_cpu_board() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CCM2200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CCM2200 ++# endif ++# define machine_is_ccm2200() (machine_arch_type == MACH_TYPE_CCM2200) ++#else ++# define machine_is_ccm2200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ETWARM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ETWARM ++# endif ++# define machine_is_etwarm() (machine_arch_type == MACH_TYPE_ETWARM) ++#else ++# define machine_is_etwarm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_M93030 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_M93030 ++# endif ++# define machine_is_m93030() (machine_arch_type == MACH_TYPE_M93030) ++#else ++# define machine_is_m93030() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CC7U ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CC7U ++# endif ++# define machine_is_cc7u() (machine_arch_type == MACH_TYPE_CC7U) ++#else ++# define machine_is_cc7u() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MTT_RANGER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MTT_RANGER ++# endif ++# define machine_is_mtt_ranger() (machine_arch_type == MACH_TYPE_MTT_RANGER) ++#else ++# define machine_is_mtt_ranger() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NEXUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NEXUS ++# endif ++# define machine_is_nexus() (machine_arch_type == MACH_TYPE_NEXUS) ++#else ++# define machine_is_nexus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DESMAN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DESMAN ++# endif ++# define machine_is_desman() (machine_arch_type == MACH_TYPE_DESMAN) ++#else ++# define machine_is_desman() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BKDE303 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BKDE303 ++# endif ++# define machine_is_bkde303() (machine_arch_type == MACH_TYPE_BKDE303) ++#else ++# define machine_is_bkde303() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SMDK2413 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SMDK2413 ++# endif ++# define machine_is_smdk2413() (machine_arch_type == MACH_TYPE_SMDK2413) ++#else ++# define machine_is_smdk2413() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AML_M7200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AML_M7200 ++# endif ++# define machine_is_aml_m7200() (machine_arch_type == MACH_TYPE_AML_M7200) ++#else ++# define machine_is_aml_m7200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AML_M5900 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AML_M5900 ++# endif ++# define machine_is_aml_m5900() (machine_arch_type == MACH_TYPE_AML_M5900) ++#else ++# define machine_is_aml_m5900() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SG640 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SG640 ++# endif ++# define machine_is_sg640() (machine_arch_type == MACH_TYPE_SG640) ++#else ++# define machine_is_sg640() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EDG79524 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EDG79524 ++# endif ++# define machine_is_edg79524() (machine_arch_type == MACH_TYPE_EDG79524) ++#else ++# define machine_is_edg79524() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AI2410 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AI2410 ++# endif ++# define machine_is_ai2410() (machine_arch_type == MACH_TYPE_AI2410) ++#else ++# define machine_is_ai2410() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXP465 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXP465 ++# endif ++# define machine_is_ixp465() (machine_arch_type == MACH_TYPE_IXP465) ++#else ++# define machine_is_ixp465() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BALLOON3 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BALLOON3 ++# endif ++# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3) ++#else ++# define machine_is_balloon3() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HEINS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HEINS ++# endif ++# define machine_is_heins() (machine_arch_type == MACH_TYPE_HEINS) ++#else ++# define machine_is_heins() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MPLUSEVA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MPLUSEVA ++# endif ++# define machine_is_mpluseva() (machine_arch_type == MACH_TYPE_MPLUSEVA) ++#else ++# define machine_is_mpluseva() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RT042 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RT042 ++# endif ++# define machine_is_rt042() (machine_arch_type == MACH_TYPE_RT042) ++#else ++# define machine_is_rt042() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CWIEM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CWIEM ++# endif ++# define machine_is_cwiem() (machine_arch_type == MACH_TYPE_CWIEM) ++#else ++# define machine_is_cwiem() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CM_X270 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CM_X270 ++# endif ++# define machine_is_cm_x270() (machine_arch_type == MACH_TYPE_CM_X270) ++#else ++# define machine_is_cm_x270() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CM_X255 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CM_X255 ++# endif ++# define machine_is_cm_x255() (machine_arch_type == MACH_TYPE_CM_X255) ++#else ++# define machine_is_cm_x255() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ESH_AT91 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ESH_AT91 ++# endif ++# define machine_is_esh_at91() (machine_arch_type == MACH_TYPE_ESH_AT91) ++#else ++# define machine_is_esh_at91() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE3 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE3 ++# endif ++# define machine_is_sandgate3() (machine_arch_type == MACH_TYPE_SANDGATE3) ++#else ++# define machine_is_sandgate3() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PRIMO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PRIMO ++# endif ++# define machine_is_primo() (machine_arch_type == MACH_TYPE_PRIMO) ++#else ++# define machine_is_primo() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GEMSTONE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GEMSTONE ++# endif ++# define machine_is_gemstone() (machine_arch_type == MACH_TYPE_GEMSTONE) ++#else ++# define machine_is_gemstone() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PRONGHORNMETRO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PRONGHORNMETRO ++# endif ++# define machine_is_pronghorn_metro() (machine_arch_type == MACH_TYPE_PRONGHORNMETRO) ++#else ++# define machine_is_pronghorn_metro() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SIDEWINDER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SIDEWINDER ++# endif ++# define machine_is_sidewinder() (machine_arch_type == MACH_TYPE_SIDEWINDER) ++#else ++# define machine_is_sidewinder() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PICOMOD1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PICOMOD1 ++# endif ++# define machine_is_picomod1() (machine_arch_type == MACH_TYPE_PICOMOD1) ++#else ++# define machine_is_picomod1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SG590 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SG590 ++# endif ++# define machine_is_sg590() (machine_arch_type == MACH_TYPE_SG590) ++#else ++# define machine_is_sg590() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AKAI9307 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AKAI9307 ++# endif ++# define machine_is_akai9307() (machine_arch_type == MACH_TYPE_AKAI9307) ++#else ++# define machine_is_akai9307() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FONTAINE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FONTAINE ++# endif ++# define machine_is_fontaine() (machine_arch_type == MACH_TYPE_FONTAINE) ++#else ++# define machine_is_fontaine() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WOMBAT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WOMBAT ++# endif ++# define machine_is_wombat() (machine_arch_type == MACH_TYPE_WOMBAT) ++#else ++# define machine_is_wombat() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ACQ300 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ACQ300 ++# endif ++# define machine_is_acq300() (machine_arch_type == MACH_TYPE_ACQ300) ++#else ++# define machine_is_acq300() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MOD_270 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MOD_270 ++# endif ++# define machine_is_mod_270() (machine_arch_type == MACH_TYPE_MOD_270) ++#else ++# define machine_is_mod_270() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VC0820 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VC0820 ++# endif ++# define machine_is_vmc_vc0820() (machine_arch_type == MACH_TYPE_VC0820) ++#else ++# define machine_is_vmc_vc0820() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ANI_AIM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ANI_AIM ++# endif ++# define machine_is_ani_aim() (machine_arch_type == MACH_TYPE_ANI_AIM) ++#else ++# define machine_is_ani_aim() (0) ++#endif ++ ++#ifdef CONFIG_MACH_JELLYFISH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_JELLYFISH ++# endif ++# define machine_is_jellyfish() (machine_arch_type == MACH_TYPE_JELLYFISH) ++#else ++# define machine_is_jellyfish() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AMANITA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AMANITA ++# endif ++# define machine_is_amanita() (machine_arch_type == MACH_TYPE_AMANITA) ++#else ++# define machine_is_amanita() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VLINK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VLINK ++# endif ++# define machine_is_vlink() (machine_arch_type == MACH_TYPE_VLINK) ++#else ++# define machine_is_vlink() (0) ++#endif ++ + /* + * These have not yet been registered + */ +diff -Naur u-boot-1.1.4.org/include/config.h u-boot-1.1.4.tmp/include/config.h +--- u-boot-1.1.4.org/include/config.h 2006-06-05 05:04:25.000000000 +0200 ++++ u-boot-1.1.4.tmp/include/config.h 2006-06-05 05:03:47.000000000 +0200 +@@ -1,2 +1,2 @@ + /* Automatically generated - do not edit */ +-#include <configs/at91rm9200dk.h> ++#include <configs/vlink.h> +diff -Naur u-boot-1.1.4.org/include/config.mk u-boot-1.1.4.tmp/include/config.mk +--- u-boot-1.1.4.org/include/config.mk 2006-06-05 05:04:25.000000000 +0200 ++++ u-boot-1.1.4.tmp/include/config.mk 2006-06-05 05:03:47.000000000 +0200 +@@ -1,4 +1,4 @@ + ARCH = arm + CPU = arm920t +-BOARD = at91rm9200dk ++BOARD = vlink + SOC = at91rm9200 +diff -Naur u-boot-1.1.4.org/include/configs/vlink.h u-boot-1.1.4.tmp/include/configs/vlink.h +--- u-boot-1.1.4.org/include/configs/vlink.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4.tmp/include/configs/vlink.h 2006-06-05 03:37:15.000000000 +0200 +@@ -0,0 +1,244 @@ ++/* ++ * Hamish Guthrie <hamish@prodigi.ch> ++ * ++ * Configuation settings for the Figment Designs Versalink board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++// Added 2 defines to skip re-init lowlevel and relocate HCG HLH ++// ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ARM asynchronous clock */ ++#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ ++#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ ++/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ ++#define CONFIG_VLINK 1 /* on a Versalink Board */ ++#define CONFIG_IDENT_STRING " FDL Versalink" ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++#define USE_920T_MMU 1 ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#ifndef CONFIG_SKIP_LOWLEVEL_INIT ++#define CFG_USE_MAIN_OSCILLATOR 1 ++/* flash */ ++#define MC_PUIA_VAL 0x00000000 ++#define MC_PUP_VAL 0x00000000 ++#define MC_PUER_VAL 0x00000000 ++#define MC_ASR_VAL 0x00000000 ++#define MC_AASR_VAL 0x00000000 ++#define EBI_CFGR_VAL 0x00000000 ++#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ ++ ++/* clocks */ ++#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ ++#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ ++#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ ++ ++/* sdram */ ++#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ ++#define PIOC_BSR_VAL 0x00000000 ++#define PIOC_PDR_VAL 0xFFFF0000 ++#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ ++#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ ++#define SDRAM 0x20000000 /* address of the SDRAM */ ++#define SDRAM1 0x20000080 /* address of the SDRAM */ ++#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ ++#define SDRC_MR_VAL 0x00000002 /* Precharge All */ ++#define SDRC_MR_VAL1 0x00000004 /* refresh */ ++#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ ++#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ ++#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* define one of these to choose the DBGU, USART0 or USART1 as console */ ++#define CONFIG_DBGU ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++ ++#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ ++ ++#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ ++ ++#define CONFIG_BOOTDELAY 3 ++/* #define CONFIG_ENV_OVERWRITE 1 */ ++ ++#define CONFIG_COMMANDS \ ++ ((CONFIG_CMD_DFL | CFG_CMD_MII |\ ++ CFG_CMD_DHCP ) & \ ++ ~(CFG_CMD_BDI | \ ++ CFG_CMD_IMI | \ ++ CFG_CMD_AUTOSCRIPT | \ ++ CFG_CMD_FPGA | \ ++ CFG_CMD_MISC | \ ++ CFG_CMD_LOADS )) ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#ifndef CONFIG_VLINK ++#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define SECTORSIZE 512 ++ ++#define ADDR_COLUMN 1 ++#define ADDR_PAGE 2 ++#define ADDR_COLUMN_PAGE 3 ++ ++#define NAND_ChipID_UNKNOWN 0x00 ++#define NAND_MAX_FLOORS 1 ++#define NAND_MAX_CHIPS 1 ++ ++#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ ++#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ ++ ++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) ++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) ++ ++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) ++ ++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) ++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) ++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) ++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) ++/* the following are NOP's in our implementation */ ++#define NAND_CTL_CLRALE(nandptr) ++#define NAND_CTL_SETALE(nandptr) ++#define NAND_CTL_CLRCLE(nandptr) ++#define NAND_CTL_SETCLE(nandptr) ++#endif ++ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ ++ ++#define CFG_MEMTEST_START PHYS_SDRAM ++#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 ++ ++#define CONFIG_DRIVER_ETHER ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_AT91C_USE_RMII ++ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) ++#define CFG_MAX_DATAFLASH_BANKS 2 ++#define CFG_MAX_DATAFLASH_PAGES 16384 ++#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ ++#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ ++ ++#ifdef CONFIG_VLINK ++#define PHYS_FLASH_1 0x10000000 ++#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++#define CFG_MAX_FLASH_BANKS 1 ++#define CFG_MAX_FLASH_SECT 256 ++#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ ++#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ ++#endif ++ ++#define CFG_ENV_IS_IN_DATAFLASH ++ ++#ifdef CFG_ENV_IS_IN_DATAFLASH ++#define CFG_ENV_OFFSET 0x21000 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x8400 /* 0x8000 */ ++#else ++#define CFG_ENV_IS_IN_FLASH 1 ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ ++#define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ ++#else ++#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ ++#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++#endif /* CFG_ENV_IS_IN_DATAFLASH */ ++ ++ ++#define CFG_LOAD_ADDR 0x21000000 /* default load address */ ++ ++#ifdef CONFIG_SKIP_LOWLEVEL_INIT ++#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ ++#define CFG_U_BOOT_BASE PHYS_FLASH_1 ++#define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ ++#else ++#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ ++#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) ++#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ ++ ++#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++ ++#ifndef __ASSEMBLY__ ++/*----------------------------------------------------------------------- ++ * Board specific extension for bd_info ++ * ++ * This structure is embedded in the global bd_info (bd_t) structure ++ * and can be used by the board specific code (eg board/...) ++ */ ++ ++struct bd_info_ext { ++ /* helper variable for board environment handling ++ * ++ * env_crc_valid == 0 => uninitialised ++ * env_crc_valid > 0 => environment crc in flash is valid ++ * env_crc_valid < 0 => environment crc in flash is invalid ++ */ ++ int env_crc_valid; ++}; ++#endif ++ ++#define CFG_HZ 1000 ++#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ ++ /* AT91C_TC_TIMER_DIV1_CLOCK */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +diff -Naur u-boot-1.1.4.org/MAKEALL u-boot-1.1.4.tmp/MAKEALL +--- u-boot-1.1.4.org/MAKEALL 2005-12-16 17:39:27.000000000 +0100 ++++ u-boot-1.1.4.tmp/MAKEALL 2006-06-05 02:44:24.000000000 +0200 +@@ -180,7 +180,7 @@ + mx1ads mx1fs2 omap1510inn omap1610h2 \ + omap1610inn omap730p2 scb9328 smdk2400 \ + smdk2410 trab VCMA9 versatile \ +- versatileab versatilepb voiceblue ++ versatileab versatilepb voiceblue vlink + " + + ######################################################################### +diff -Naur u-boot-1.1.4.org/Makefile u-boot-1.1.4.tmp/Makefile +--- u-boot-1.1.4.org/Makefile 2006-06-02 15:58:57.000000000 +0200 ++++ u-boot-1.1.4.tmp/Makefile 2006-06-05 04:40:45.000000000 +0200 +@@ -1419,6 +1419,9 @@ + mp2usb_config : unconfig + @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + ++vlink_config : unconfig ++ @./mkconfig $(@:_config=) arm arm920t vlink NULL at91rm9200 ++ + + ######################################################################## + ## ARM Integrator boards - see doc/README-integrator for more info. diff --git a/target/linux/at91/image/u-boot/patches/003-mac_init.patch b/target/linux/at91/image/u-boot/patches/003-mac_init.patch new file mode 100644 index 0000000..ec5dffa --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/003-mac_init.patch @@ -0,0 +1,14 @@ +--- u-boot-1.1.4.org/lib_arm/board.c 2006-06-05 12:36:22.000000000 +0200 ++++ u-boot-1.1.4.tmp/lib_arm/board.c 2006-06-05 12:36:44.000000000 +0200 +@@ -332,6 +332,11 @@ + } + #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ + ++#ifdef CONFIG_MACH_VLINK ++ printf("Initialising MAC address\n\r"); ++ eth_init(gd->bd); ++#endif ++ + /* Initialize from environment */ + if ((s = getenv ("loadaddr")) != NULL) { + load_addr = simple_strtoul (s, NULL, 16); diff --git a/target/linux/at91/image/u-boot/patches/004-mac_config.patch b/target/linux/at91/image/u-boot/patches/004-mac_config.patch new file mode 100644 index 0000000..73a8260 --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/004-mac_config.patch @@ -0,0 +1,15 @@ +--- u-boot-1.1.4.ttt/include/configs/vlink.h 2006-06-05 15:57:37.000000000 +0200 ++++ u-boot-1.1.4/include/configs/vlink.h 2006-06-07 13:11:01.000000000 +0200 +@@ -105,9 +105,9 @@ + + #define CONFIG_COMMANDS \ + ((CONFIG_CMD_DFL | CFG_CMD_MII |\ +- CFG_CMD_DHCP ) & \ +- ~(CFG_CMD_BDI | \ +- CFG_CMD_IMI | \ ++ CFG_CMD_DHCP | \ ++ CFG_CMD_BDI ) & \ ++ ~(CFG_CMD_IMI | \ + CFG_CMD_AUTOSCRIPT | \ + CFG_CMD_FPGA | \ + CFG_CMD_MISC | \ diff --git a/target/linux/at91/image/u-boot/patches/005-remove_float.patch b/target/linux/at91/image/u-boot/patches/005-remove_float.patch new file mode 100644 index 0000000..802c963 --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/005-remove_float.patch @@ -0,0 +1,13 @@ +diff -urN u-boot-1.1.4.old/cpu/arm920t/config.mk u-boot-1.1.4/cpu/arm920t/config.mk +--- u-boot-1.1.4.old/cpu/arm920t/config.mk 2007-03-19 12:44:39.000000000 +0100 ++++ u-boot-1.1.4/cpu/arm920t/config.mk 2007-03-20 09:23:54.000000000 +0100 +@@ -21,8 +21,7 @@ + # MA 02111-1307 USA + # + +-PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ +- -msoft-float ++PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 + + PLATFORM_CPPFLAGS += -march=armv4 + # ========================================================================= diff --git a/target/linux/at91/image/u-boot/patches/006-generate_params.patch b/target/linux/at91/image/u-boot/patches/006-generate_params.patch new file mode 100644 index 0000000..d278cfb --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/006-generate_params.patch @@ -0,0 +1,115 @@ +--- u-boot-1.1.4.old/tools/Makefile 2007-03-22 18:17:25.000000000 +0100 ++++ u-boot-1.1.4/tools/Makefile 2007-03-22 17:08:46.000000000 +0100 +@@ -21,9 +21,9 @@ + # MA 02111-1307 USA + # + +-BINS = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) ++BINS = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) ubparams$(SFX) + +-OBJS = environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o ++OBJS = environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o ubparams.o + + ifeq ($(ARCH),mips) + BINS += inca-swap-bytes$(SFX) +@@ -118,6 +118,9 @@ + + all: .depend $(BINS) $(LOGO_H) subdirs + ++ubparams$(SFX): ubparams.o crc32.o ++ $(CC) $(CFLAGS) -o $@ $^ ++ + envcrc$(SFX): envcrc.o crc32.o environment.o + $(CC) $(CFLAGS) -o $@ $^ + +@@ -149,6 +152,9 @@ + $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ + $(STRIP) $@ + ++ubparams.o: ubparams.c ++ $(CC) -g $(CFLAGS) -c $< ++ + envcrc.o: envcrc.c + $(CC) -g $(CFLAGS) -c $< + +--- u-boot-1.1.4.old/tools/ubparams.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-1.1.4/tools/ubparams.c 2007-03-22 18:09:52.000000000 +0100 +@@ -0,0 +1,78 @@ ++/* ++ * ubparams.c ++ * ++ * Generate a u-boot parameter block with correct crc ++ * ++ * (C) 1007 Guthrie Consulting ++ * hamish@prodigi.ch ++ * ++ */ ++ ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++ ++#ifndef __ASSEMBLY__ ++#define __ASSEMBLY__ ++#endif ++#define __ASM_STUB_PROCESSOR_H__ ++#include <config.h> ++#undef __ASSEMBLY__ ++#include "environment.h" ++ ++#define XMK_STR(x) #x ++#define MK_STR(x) XMK_STR(x) ++ ++extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int); ++ ++#if !defined(ENV_CRC) ++#define ENV_CRC ~0 ++#endif ++ ++unsigned int env_size = 0x8400; ++env_t environment = { ++ ENV_CRC, ++ "bootdelay=3\0" ++ "baudrate=115200\0" ++ "stdin=serial\0" ++ "stdout=serial\0" ++ "stderr=serial\0" ++ "partitions=mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data)\0" ++ "fbargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" ++ "rdba=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" ++ "rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0" ++ "flash=run fbargs; bootm 0xc0042000\0" ++ "bootargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" ++ "bootcmd=bootm 0xc0042000\0" ++ "ethaddr=00:30:49:00:00:01\0" ++ "ipaddr=10.0.1.73\0" ++ "serverip=10.0.1.210\0" ++ "serial#=MX070205484\0" ++ "\0" ++ }; ++ ++int main(void) { ++ env_t *envptr, *source; ++ unsigned char *dataptr; ++ FILE *params; ++ ++ source = &environment; ++ envptr = (env_t *)malloc(CFG_ENV_SIZE); ++ dataptr = (unsigned char *)envptr + ENV_HEADER_SIZE; ++ ++ printf("Make u-boot params\n"); ++ printf("Params size is %d\n", CFG_ENV_SIZE); ++ ++ memset(envptr, 0, CFG_ENV_SIZE); ++ memcpy(envptr, source, sizeof(environment)); ++ ++ envptr->crc = crc32(0, envptr->data, ENV_SIZE); ++ ++ params = fopen("params", "w"); ++ fwrite(envptr, CFG_ENV_SIZE, 1, params); ++ fclose(params); ++ ++ free(envptr); ++ } ++ ++ diff --git a/target/linux/at91/image/u-boot/patches/007-ubparams_bugfix.patch b/target/linux/at91/image/u-boot/patches/007-ubparams_bugfix.patch new file mode 100644 index 0000000..3d069e4 --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/007-ubparams_bugfix.patch @@ -0,0 +1,11 @@ +--- u-boot-1.1.4.old/tools/ubparams.c 2007-03-22 18:09:52.000000000 +0100 ++++ u-boot-1.1.4/tools/ubparams.c 2007-03-22 18:29:32.000000000 +0100 +@@ -18,7 +18,7 @@ + #define __ASM_STUB_PROCESSOR_H__ + #include <config.h> + #undef __ASSEMBLY__ +-#include "environment.h" ++#include <environment.h> + + #define XMK_STR(x) #x + #define MK_STR(x) XMK_STR(x) diff --git a/target/linux/at91/image/u-boot/patches/008-ubparams_bugfix.patch b/target/linux/at91/image/u-boot/patches/008-ubparams_bugfix.patch new file mode 100644 index 0000000..9a16e19 --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/008-ubparams_bugfix.patch @@ -0,0 +1,10 @@ +--- u-boot-1.1.4.old/tools/ubparams.c 2007-03-23 10:51:17.000000000 +0100 ++++ u-boot-1.1.4/tools/ubparams.c 2007-03-23 10:49:37.000000000 +0100 +@@ -73,6 +73,7 @@ + fclose(params); + + free(envptr); ++ return 0; + } + + diff --git a/target/linux/at91/image/u-boot/patches/009-mac_init_bugfix.patch b/target/linux/at91/image/u-boot/patches/009-mac_init_bugfix.patch new file mode 100644 index 0000000..a36ebe3 --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/009-mac_init_bugfix.patch @@ -0,0 +1,12 @@ +diff -urN u-boot-1.1.4.old/lib_arm/board.c u-boot-1.1.4/lib_arm/board.c +--- u-boot-1.1.4.old/lib_arm/board.c 2007-03-23 10:53:52.000000000 +0100 ++++ u-boot-1.1.4/lib_arm/board.c 2007-03-24 13:17:12.000000000 +0100 +@@ -332,7 +332,7 @@ + } + #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ + +-#ifdef CONFIG_MACH_VLINK ++#ifdef CONFIG_VLINK + printf("Initialising MAC address\n\r"); + eth_init(gd->bd); + #endif diff --git a/target/linux/at91/image/u-boot/patches/010-irda-patch-remove.patch b/target/linux/at91/image/u-boot/patches/010-irda-patch-remove.patch new file mode 100644 index 0000000..2f23f5b --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/010-irda-patch-remove.patch @@ -0,0 +1,13 @@ +--- u-boot-1.1.4.old/board/vlink/vlink.c 2007-04-03 11:42:39.000000000 +0200 ++++ u-boot-1.1.4/board/vlink/vlink.c 2007-04-03 11:48:33.000000000 +0200 +@@ -40,10 +40,6 @@ + /* Enable Ctrlc */ + console_init_f (); + +- /* Correct IRDA resistor problem */ +- /* Set PA23_TXD in Output */ +- (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; +- + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + diff --git a/target/linux/at91/image/u-boot/patches/011-ubparams_update.patch b/target/linux/at91/image/u-boot/patches/011-ubparams_update.patch new file mode 100644 index 0000000..267903e --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/011-ubparams_update.patch @@ -0,0 +1,19 @@ +diff -urN u-boot-1.1.4.old/tools/ubparams.c u-boot-1.1.4/tools/ubparams.c +--- u-boot-1.1.4.old/tools/ubparams.c 2007-05-01 13:20:17.000000000 +0200 ++++ u-boot-1.1.4/tools/ubparams.c 2007-05-04 10:13:34.000000000 +0200 +@@ -37,12 +37,11 @@ + "stdin=serial\0" + "stdout=serial\0" + "stderr=serial\0" +- "partitions=mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data)\0" +- "fbargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" +- "rdba=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" ++ "fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" ++ "rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" + "rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0" + "flash=run fbargs; bootm 0xc0042000\0" +- "bootargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" ++ "bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" + "bootcmd=bootm 0xc0042000\0" + "ethaddr=00:30:49:00:00:01\0" + "ipaddr=10.0.1.73\0" diff --git a/target/linux/at91/image/u-boot/patches/012-make_3.81.patch b/target/linux/at91/image/u-boot/patches/012-make_3.81.patch new file mode 100644 index 0000000..767493f --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/012-make_3.81.patch @@ -0,0 +1,16 @@ +diff -urN u-boot-1.1.4.orig/examples/Makefile u-boot-1.1.4/examples/Makefile +--- u-boot-1.1.4.orig/examples/Makefile 2007-05-13 13:45:44.000000000 +0200 ++++ u-boot-1.1.4/examples/Makefile 2007-05-13 13:48:43.000000000 +0200 +@@ -123,10 +123,10 @@ + $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \ + -o $@ -e $(<:.o=) $< $(LIB) \ + -L$(gcclibdir) -lgcc +-%.srec: % ++%.srec: %.o + $(OBJCOPY) -O srec $< $@ 2>/dev/null + +-%.bin: % ++%.bin: %.o + $(OBJCOPY) -O binary $< $@ 2>/dev/null + + ######################################################################### diff --git a/target/linux/at91/image/u-boot/patches/013-params-in-config.patch b/target/linux/at91/image/u-boot/patches/013-params-in-config.patch new file mode 100644 index 0000000..11ff2a3 --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/013-params-in-config.patch @@ -0,0 +1,24 @@ +--- u-boot-1.1.4.old/tools/Makefile 2007-06-13 13:35:59.000000000 +0200 ++++ u-boot-1.1.4/tools/Makefile 2007-06-14 15:33:04.000000000 +0200 +@@ -153,7 +153,7 @@ + $(STRIP) $@ + + ubparams.o: ubparams.c +- $(CC) -g $(CFLAGS) -c $< ++ $(CC) -g $(CFLAGS) -DLAN_IP=$(LAN_IP) -DLAN_SERVERIP=$(LAN_SERVERIP) -c $< + + envcrc.o: envcrc.c + $(CC) -g $(CFLAGS) -c $< +--- u-boot-1.1.4.old/tools/ubparams.c 2007-06-13 13:35:59.000000000 +0200 ++++ u-boot-1.1.4/tools/ubparams.c 2007-06-14 15:31:55.000000000 +0200 +@@ -44,8 +44,8 @@ + "bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" + "bootcmd=bootm 0xc0042000\0" + "ethaddr=00:30:49:00:00:01\0" +- "ipaddr=10.0.1.73\0" +- "serverip=10.0.1.210\0" ++ "ipaddr=" MK_STR(LAN_IP) "\0" ++ "serverip=" MK_STR(LAN_SERVERIP) "\0" + "serial#=MX070205484\0" + "\0" + }; diff --git a/target/linux/at91/image/u-boot/patches/014-ubparam-kernel.patch b/target/linux/at91/image/u-boot/patches/014-ubparam-kernel.patch new file mode 100644 index 0000000..f6d0a1b --- /dev/null +++ b/target/linux/at91/image/u-boot/patches/014-ubparam-kernel.patch @@ -0,0 +1,11 @@ +--- u-boot-1.1.4.old/tools/ubparams.c 2007-06-19 14:24:39.000000000 +0200 ++++ u-boot-1.1.4/tools/ubparams.c 2007-06-19 14:25:05.000000000 +0200 +@@ -39,7 +39,7 @@ + "stderr=serial\0" + "fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" + "rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" +- "rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0" ++ "rdram=run rdba; tftp 21000000 uImage; tftp 21200000 root.squashfs; bootm 21000000\0" + "flash=run fbargs; bootm 0xc0042000\0" + "bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" + "bootcmd=bootm 0xc0042000\0" diff --git a/target/linux/at91/image/u-boot/ubclient/Makefile b/target/linux/at91/image/u-boot/ubclient/Makefile new file mode 100644 index 0000000..f8ff67c --- /dev/null +++ b/target/linux/at91/image/u-boot/ubclient/Makefile @@ -0,0 +1,15 @@ +# + +all: ubpar + +crc32.c: + ln -s ../lib_generic/crc32.c ./ + +%.o: %.c + $(CC) -I ../include $(CFLAGS) $(EXTRA_FLAGS) -DLAN_IP=$(LAN_IP) -DLAN_SERVERIP=$(LAN_SERVERIP) -c -o $@ $^ + +ubpar: ubpar.o crc32.o + $(CC) -o $@ $^ + +clean: + rm -f *.o ubpar diff --git a/target/linux/at91/image/u-boot/ubclient/ubpar.c b/target/linux/at91/image/u-boot/ubclient/ubpar.c new file mode 100644 index 0000000..7e8ea0e --- /dev/null +++ b/target/linux/at91/image/u-boot/ubclient/ubpar.c @@ -0,0 +1,135 @@ +/* + * ubparams.c + * + * Generate a u-boot parameter block with correct crc + * + * (C) 1007 Guthrie Consulting + * hamish@prodigi.ch + * + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#ifndef __ASSEMBLY__ +#define __ASSEMBLY__ +#endif +#define __ASM_STUB_PROCESSOR_H__ +#include <config.h> +#undef __ASSEMBLY__ +#include <environment.h> + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int); + +#if !defined(ENV_CRC) +#define ENV_CRC ~0 +#endif + +#ifdef LAN_IP + #warning LAN_IP +#else + #warning LAN_IP NOT DEFINED +#endif +#ifdef LAN_SERVERIP + #warning LAN_SERVERIP +#else + #warning LAN_SERVERIP NOT DEFINED +#endif + +static char *environment[] = { + "bootdelay=3\0" + "baudrate=115200\0" + "stdin=serial\0" + "stdout=serial\0" + "stderr=serial\0" + "fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" + "rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" + "rdram=run rdba; tftp 21000000 uImage; tftp 21200000 root.squashfs; bootm 21000000\0" + "flash=run fbargs; bootm 0xc0042000\0" + "bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" + "bootcmd=bootm 0xc0042000\0" + "ipaddr=" MK_STR(LAN_IP) "\0" + "serverip=" MK_STR(LAN_SERVERIP) "\0" + "\0" + }; + +int main(int argc, char *argv[]) { + env_t *envptr; + char *src, *srcptr; + char *dataptr; + FILE *params; + int argfail = 1; + char newmac[30]; + char newser[30]; + int paramlen = 0; + int progmac = 0; + int progser = 0; + + if (argc < 3) { + printf ("Invalid arguments\n"); + return 1; + } + + switch (argc) { + case 5: + if (strcmp(argv[3], "--serial") == 0) { + argfail = 0; + sprintf(newser, "serial#=%s", argv[4]); + progser = 1; + } + case 3: + if (strcmp(argv[1], "--mac") == 0) { + argfail = 0; + sprintf(newmac, "ethaddr=%s", argv[2]); + progmac = 1; + } + else + argfail = 1; + } + + if (argfail) { + printf("Invalid arguments\n"); + return 1; + } + + + src = srcptr = *environment; + envptr = (env_t *)malloc(CFG_ENV_SIZE); + dataptr = (char *)envptr + ENV_HEADER_SIZE; + + while(*srcptr) { + //printf("%d, %s\n", strlen(srcptr), srcptr); + paramlen += strlen(srcptr) + 1; + srcptr += strlen(srcptr) + 1; + } + + printf("Make u-boot params\n"); + printf("Params size is %d\n", CFG_ENV_SIZE); + + memset(envptr, 0, CFG_ENV_SIZE); + memcpy(dataptr, src, paramlen); + dataptr += paramlen; + + if (progmac) { + memcpy(dataptr, newmac, strlen(newmac)); + dataptr += strlen(newmac) + 1; + } + + if (progser) { + memcpy(dataptr, newser, strlen(newser)); + dataptr += strlen(newser) + 1; + } + + envptr->crc = crc32(0, envptr->data, ENV_SIZE); + + params = fopen("/dev/mtd1", "w"); + fwrite(envptr, CFG_ENV_SIZE, 1, params); + fclose(params); + + free(envptr); + return 0; +} diff --git a/target/linux/at91/patches-2.6.21/000-at91patches.patch b/target/linux/at91/patches-2.6.21/000-at91patches.patch new file mode 100644 index 0000000..93fa2cf --- /dev/null +++ b/target/linux/at91/patches-2.6.21/000-at91patches.patch @@ -0,0 +1,10312 @@ +diff -urN -x CVS linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S +--- linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S Tue May 8 12:13:30 2007 +@@ -67,6 +67,12 @@ + cmp r7, r3 + beq 99f + ++ @ Promwad Chub : 1181 ++ mov r3, #(MACH_TYPE_CHUB & 0xff) ++ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00) ++ cmp r7, r3 ++ beq 99f ++ + @ Unknown board, use the AT91RM9200DK board + @ mov r7, #MACH_TYPE_AT91RM9200 + mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Kconfig linux-2.6-stable/arch/arm/mach-at91/Kconfig +--- linux-2.6.21/arch/arm/mach-at91/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/Kconfig Wed May 9 10:20:54 2007 +@@ -17,6 +17,9 @@ + config ARCH_AT91SAM9263 + bool "AT91SAM9263" + ++config ARCH_AT91SAM9RL ++ bool "AT91SAM9RL" ++ + endchoice + + # ---------------------------------------------------------- +@@ -87,6 +90,12 @@ + help + Select this if you are using Sperry-Sun's KAFA board. + ++config MACH_CHUB ++ bool "Promwad Chub board" ++ depends on ARCH_AT91RM9200 ++ help ++ Select this if you are using Promwad's Chub board. ++ + endif + + # ---------------------------------------------------------- +@@ -111,6 +120,13 @@ + Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> + ++config MACH_CAM60 ++ bool "KwikByte CAM60 board" ++ depends on ARCH_AT91SAM9260 ++ help ++ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260. ++ <http://www.kwikbyte.com> ++ + endif + + # ---------------------------------------------------------- +@@ -145,6 +161,20 @@ + + # ---------------------------------------------------------- + ++if ARCH_AT91SAM9RL ++ ++comment "AT91SAM9RL Board Type" ++ ++config MACH_AT91SAM9RLEK ++ bool "Atmel AT91SAM9RL-EK Evaluation Kit" ++ depends on ARCH_AT91SAM9RL ++ help ++ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. ++ ++endif ++ ++# ---------------------------------------------------------- ++ + comment "AT91 Board Options" + + config MTD_AT91_DATAFLASH_CARD +@@ -160,6 +190,20 @@ + On AT91SAM926x boards both types of NAND flash can be present + (8 and 16 bit data bus width). + ++config CSB300_WAKE_SW0 ++ bool "CSB300 SW0 irq0 wakeup" ++ depends on MACH_CSB337 && PM ++ help ++ If you have a CSB300 connected to your CSB337, this lets ++ SW0 serve as a wakeup button. It uses IRQ0. ++ ++config CSB300_WAKE_SW1 ++ bool "CSB300 SW1 gpio wakeup" ++ depends on MACH_CSB337 && PM ++ help ++ If you have a CSB300 connected to your CSB337, this lets ++ SW1 serve as a wakeup button. It uses GPIO. ++ + # ---------------------------------------------------------- + + comment "AT91 Feature Selections" +@@ -170,6 +214,20 @@ + Select this if you need to program one or more of the PCK0..PCK3 + programmable clock outputs. + ++config ATMEL_TCLIB ++ bool "Timer/Counter Library" ++ help ++ Select this if you want a library to allocate the Timer/Counter ++ blocks found on many Atmel processors. This facilitates using ++ these modules despite processor differences. ++ ++config AT91_SLOW_CLOCK ++ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)" ++ depends on PM && EXPERIMENTAL ++ help ++ Select this if you wish to put the CPU into slow clock mode ++ while in the "Suspend to RAM" state, to save more power. ++ + endmenu + + endif +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Makefile linux-2.6-stable/arch/arm/mach-at91/Makefile +--- linux-2.6.21/arch/arm/mach-at91/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/Makefile Wed May 9 12:37:19 2007 +@@ -8,12 +8,15 @@ + obj- := + + obj-$(CONFIG_PM) += pm.o ++obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o ++obj-$(CONFIG_ATMEL_TCLIB) += tclib.o + + # CPU-specific support + obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o + obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o + obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o + obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o ++obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o + + # AT91RM9200 board-specific support + obj-$(CONFIG_MACH_ONEARM) += board-1arm.o +@@ -25,9 +28,11 @@ + obj-$(CONFIG_MACH_KB9200) += board-kb9202.o + obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o + obj-$(CONFIG_MACH_KAFA) += board-kafa.o ++obj-$(CONFIG_MACH_CHUB) += board-chub.o + + # AT91SAM9260 board-specific support + obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o ++obj-$(CONFIG_MACH_CAM60) += board-cam60.o + + # AT91SAM9261 board-specific support + obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o +@@ -35,9 +40,13 @@ + # AT91SAM9263 board-specific support + obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o + ++# AT91SAM9RL board-specific support ++obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o ++ + # LEDs support + led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o + led-$(CONFIG_MACH_AT91RM9200EK) += leds.o ++led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o + led-$(CONFIG_MACH_CSB337) += leds.o + led-$(CONFIG_MACH_CSB637) += leds.o + led-$(CONFIG_MACH_KB9200) += leds.o +@@ -45,7 +54,7 @@ + obj-$(CONFIG_LEDS) += $(led-y) + + # VGA support +-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o ++obj-$(CONFIG_FB_S1D13XXX) += ics1523.o + + + ifeq ($(CONFIG_PM_DEBUG),y) +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c +--- linux-2.6.21/arch/arm/mach-at91/at91rm9200.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c Tue May 8 12:13:30 2007 +@@ -117,6 +117,21 @@ + .pmc_mask = 1 << AT91RM9200_ID_PIOD, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk ssc0_clk = { ++ .name = "ssc0_clk", ++ .pmc_mask = 1 << AT91RM9200_ID_SSC0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc1_clk = { ++ .name = "ssc1_clk", ++ .pmc_mask = 1 << AT91RM9200_ID_SSC1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc2_clk = { ++ .name = "ssc2_clk", ++ .pmc_mask = 1 << AT91RM9200_ID_SSC2, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91RM9200_ID_TC0, +@@ -161,7 +176,9 @@ + &udc_clk, + &twi_clk, + &spi_clk, +- // ssc 0 .. ssc2 ++ &ssc0_clk, ++ &ssc1_clk, ++ &ssc2_clk, + &tc0_clk, + &tc1_clk, + &tc2_clk, +@@ -250,6 +267,33 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91rm9200_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91RM9200_BASE_TCB0, ++ .irq = { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ }, ++ [1] = { ++ .physaddr = AT91RM9200_BASE_TCB1, ++ .irq = { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 }, ++ .clk = { &tc3_clk, &tc4_clk, &tc5_clk }, ++ }, ++}; ++ ++#define at91rm9200_tc_init() atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks)) ++ ++#else ++#define at91rm9200_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91RM9200 processor initialization + * -------------------------------------------------------------------- */ + void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +@@ -271,6 +315,9 @@ + + /* Initialize GPIO subsystem */ + at91_gpio_init(at91rm9200_gpio, banks); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91rm9200_tc_init(); + } + + +@@ -284,28 +331,28 @@ + static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ +- 0, /* Parallel IO Controller D */ +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ +- 6, /* USART 3 */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller D */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ ++ 5, /* USART 3 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface */ +- 5, /* Serial Synchronous Controller 0 */ +- 5, /* Serial Synchronous Controller 1 */ +- 5, /* Serial Synchronous Controller 2 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 4, /* Serial Synchronous Controller 2 */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* Ethernet MAC */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c +--- linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c Tue May 8 12:13:30 2007 +@@ -480,7 +480,18 @@ + * SPI + * -------------------------------------------------------------------- */ + +-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) ++#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */ ++#define SPI_DEVNAME "at91_spi" ++ ++#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */ ++#define SPI_DEVNAME "at91_spi" ++ ++#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */ ++#define SPI_DEVNAME "atmel_spi" ++ ++#endif ++ ++#ifdef SPI_DEVNAME + static u64 spi_dmamask = 0xffffffffUL; + + static struct resource spi_resources[] = { +@@ -497,7 +508,7 @@ + }; + + static struct platform_device at91rm9200_spi_device = { +- .name = "at91_spi", ++ .name = SPI_DEVNAME, + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, +@@ -606,6 +617,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9260.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c Tue May 8 12:13:30 2007 +@@ -119,6 +119,11 @@ + .pmc_mask = 1 << AT91SAM9260_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk ssc_clk = { ++ .name = "ssc_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_SSC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91SAM9260_ID_TC0, +@@ -193,7 +198,7 @@ + &twi_clk, + &spi0_clk, + &spi1_clk, +- // ssc ++ &ssc_clk, + &tc0_clk, + &tc1_clk, + &tc2_clk, +@@ -264,6 +269,33 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91sam9260_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91SAM9260_BASE_TCB0, ++ .irq = { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ }, ++ [1] = { ++ .physaddr = AT91SAM9260_BASE_TCB1, ++ .irq = { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 }, ++ .clk = { &tc3_clk, &tc4_clk, &tc5_clk }, ++ }, ++}; ++ ++#define at91sam9260_tc_init() atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks)) ++ ++#else ++#define at91sam9260_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91SAM9260 processor initialization + * -------------------------------------------------------------------- */ + +@@ -310,6 +342,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9260_gpio, 3); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9260_tc_init(); + } + + /* -------------------------------------------------------------------- +@@ -322,30 +357,30 @@ + static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ + 0, /* Analog-to-Digital Converter */ +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface 0 */ +- 6, /* Serial Peripheral Interface 1 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface 0 */ ++ 5, /* Serial Peripheral Interface 1 */ + 5, /* Serial Synchronous Controller */ + 0, + 0, + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* Ethernet */ + 0, /* Image Sensor Interface */ +- 6, /* USART 3 */ +- 6, /* USART 4 */ +- 6, /* USART 5 */ ++ 5, /* USART 3 */ ++ 5, /* USART 4 */ ++ 5, /* USART 5 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c Tue May 8 12:13:30 2007 +@@ -527,6 +527,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9261.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c Tue May 8 12:13:30 2007 +@@ -97,6 +97,21 @@ + .pmc_mask = 1 << AT91SAM9261_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk ssc0_clk = { ++ .name = "ssc0_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_SSC0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc1_clk = { ++ .name = "ssc1_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_SSC1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc2_clk = { ++ .name = "ssc2_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_SSC2, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk tc0_clk = { + .name = "tc0_clk", + .pmc_mask = 1 << AT91SAM9261_ID_TC0, +@@ -135,7 +150,9 @@ + &twi_clk, + &spi0_clk, + &spi1_clk, +- // ssc 0 .. ssc2 ++ &ssc0_clk, ++ &ssc1_clk, ++ &ssc2_clk, + &tc0_clk, + &tc1_clk, + &tc2_clk, +@@ -230,6 +247,28 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91sam9261_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91SAM9261_BASE_TCB0, ++ .irq = { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ } ++}; ++ ++#define at91sam9261_tc_init() atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks)) ++ ++#else ++#define at91sam9261_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91SAM9261 processor initialization + * -------------------------------------------------------------------- */ + +@@ -250,6 +289,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9261_gpio, 3); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9261_tc_init(); + } + + /* -------------------------------------------------------------------- +@@ -262,25 +304,25 @@ + static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ + 0, +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface 0 */ +- 6, /* Serial Peripheral Interface 1 */ +- 5, /* Serial Synchronous Controller 0 */ +- 5, /* Serial Synchronous Controller 1 */ +- 5, /* Serial Synchronous Controller 2 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface 0 */ ++ 5, /* Serial Peripheral Interface 1 */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 4, /* Serial Synchronous Controller 2 */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* LCD Controller */ + 0, + 0, +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c Tue May 8 12:56:33 2007 +@@ -14,6 +14,9 @@ + #include <asm/mach/map.h> + + #include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/arch/board.h> + #include <asm/arch/gpio.h> +@@ -430,9 +433,9 @@ + * LCD Controller + * -------------------------------------------------------------------- */ + +-#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE) ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) + static u64 lcdc_dmamask = 0xffffffffUL; +-static struct at91fb_info lcdc_data; ++static struct atmel_lcdfb_info lcdc_data; + + static struct resource lcdc_resources[] = { + [0] = { +@@ -455,7 +458,7 @@ + }; + + static struct platform_device at91_lcdc_device = { +- .name = "at91-fb", ++ .name = "atmel_lcdfb", + .id = 0, + .dev = { + .dma_mask = &lcdc_dmamask, +@@ -466,7 +469,7 @@ + .num_resources = ARRAY_SIZE(lcdc_resources), + }; + +-void __init at91_add_device_lcdc(struct at91fb_info *data) ++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) + { + if (!data) { + return; +@@ -499,7 +502,7 @@ + platform_device_register(&at91_lcdc_device); + } + #else +-void __init at91_add_device_lcdc(struct at91fb_info *data) {} ++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} + #endif + + +@@ -525,6 +528,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9263.c linux-2.6-stable/arch/arm/mach-at91/at91sam9263.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9263.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9263.c Tue May 8 12:13:30 2007 +@@ -87,6 +87,11 @@ + .pmc_mask = 1 << AT91SAM9263_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk can_clk = { ++ .name = "can_clk", ++ .pmc_mask = 1 << AT91SAM9263_ID_CAN, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91SAM9263_ID_TWI, +@@ -102,16 +107,46 @@ + .pmc_mask = 1 << AT91SAM9263_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk ssc0_clk = { ++ .name = "ssc0_clk", ++ .pmc_mask = 1 << AT91SAM9263_ID_SSC0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc1_clk = { ++ .name = "ssc1_clk", ++ .pmc_mask = 1 << AT91SAM9263_ID_SSC1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ac97_clk = { ++ .name = "ac97_clk", ++ .pmc_mask = 1 << AT91SAM9263_ID_AC97C, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk tcb_clk = { + .name = "tcb_clk", + .pmc_mask = 1 << AT91SAM9263_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk pwmc_clk = { ++ .name = "pwmc_clk", ++ .pmc_mask = 1 << AT91SAM9263_ID_PWMC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk macb_clk = { + .name = "macb_clk", + .pmc_mask = 1 << AT91SAM9263_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, + }; ++static struct clk dma_clk = { ++ .name = "dma_clk", ++ .pmc_mask = 1 << AT91SAM9263_ID_DMA, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk twodge_clk = { ++ .name = "2dge_clk", ++ .pmc_mask = 1 << AT91SAM9263_ID_2DGE, ++ .type = CLK_TYPE_PERIPHERAL, ++}; + static struct clk udc_clk = { + .name = "udc_clk", + .pmc_mask = 1 << AT91SAM9263_ID_UDP, +@@ -142,20 +177,21 @@ + &usart2_clk, + &mmc0_clk, + &mmc1_clk, +- // can ++ &can_clk, + &twi_clk, + &spi0_clk, + &spi1_clk, +- // ssc0 .. ssc1 +- // ac97 ++ &ssc0_clk, ++ &ssc1_clk, ++ &ac97_clk, + &tcb_clk, +- // pwmc ++ &pwmc_clk, + &macb_clk, +- // 2dge ++ &twodge_clk, + &udc_clk, + &isi_clk, + &lcdc_clk, +- // dma ++ &dma_clk, + &ohci_clk, + // irq0 .. irq1 + }; +@@ -237,6 +273,28 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91sam9263_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91SAM9263_BASE_TCB0, ++ .irq = { AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB }, ++ .clk = { &tcb_clk, &tcb_clk, &tcb_clk }, ++ } ++}; ++ ++#define at91sam9263_tc_init() atmel_tc_init(at91sam9263_tcblocks, ARRAY_SIZE(at91sam9263_tcblocks)) ++ ++#else ++#define at91sam9263_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91SAM9263 processor initialization + * -------------------------------------------------------------------- */ + +@@ -256,6 +314,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9263_gpio, 5); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9263_tc_init(); + } + + /* -------------------------------------------------------------------- +@@ -268,34 +329,34 @@ + static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C, D and E */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C, D and E */ + 0, + 0, +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ + 0, /* Multimedia Card Interface 0 */ + 0, /* Multimedia Card Interface 1 */ +- 4, /* CAN */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface 0 */ +- 6, /* Serial Peripheral Interface 1 */ +- 5, /* Serial Synchronous Controller 0 */ +- 5, /* Serial Synchronous Controller 1 */ +- 6, /* AC97 Controller */ ++ 3, /* CAN */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface 0 */ ++ 5, /* Serial Peripheral Interface 1 */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 5, /* AC97 Controller */ + 0, /* Timer Counter 0, 1 and 2 */ + 0, /* Pulse Width Modulation Controller */ + 3, /* Ethernet */ + 0, + 0, /* 2D Graphic Engine */ +- 3, /* USB Device Port */ ++ 2, /* USB Device Port */ + 0, /* Image Sensor Interface */ + 3, /* LDC Controller */ + 0, /* DMA Controller */ + 0, +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ + }; +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9263_devices.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9263_devices.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9263_devices.c Thu May 10 12:23:46 2007 +@@ -13,6 +13,9 @@ + #include <asm/mach/map.h> + + #include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/arch/board.h> + #include <asm/arch/gpio.h> +@@ -573,6 +576,180 @@ + + + /* -------------------------------------------------------------------- ++ * AC97 ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) ++static u64 ac97_dmamask = 0xffffffffUL; ++static struct atmel_ac97_data ac97_data; ++ ++static struct resource ac97_resources[] = { ++ [0] = { ++ .start = AT91SAM9263_BASE_AC97C, ++ .end = AT91SAM9263_BASE_AC97C + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9263_ID_AC97C, ++ .end = AT91SAM9263_ID_AC97C, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9263_ac97_device = { ++ .name = "ac97c", ++ .id = 1, ++ .dev = { ++ .dma_mask = &ac97_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &ac97_data, ++ }, ++ .resource = ac97_resources, ++ .num_resources = ARRAY_SIZE(ac97_resources), ++}; ++ ++void __init at91_add_device_ac97(struct atmel_ac97_data *data) ++{ ++ if (!data) ++ return; ++ ++ at91_set_A_periph(AT91_PIN_PB0, 0); /* AC97FS */ ++ at91_set_A_periph(AT91_PIN_PB1, 0); /* AC97CK */ ++ at91_set_A_periph(AT91_PIN_PB2, 0); /* AC97TX */ ++ at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */ ++ ++ /* reset */ ++ if (data->reset_pin) ++ at91_set_gpio_output(data->reset_pin, 0); ++ ++ ac97_data = *ek_data; ++ platform_device_register(&at91sam9263_ac97_device); ++} ++#else ++void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * Image Sensor Interface ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE) ++ ++struct resource isi_resources[] = { ++ [0] = { ++ .start = AT91SAM9263_BASE_ISI, ++ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9263_ID_ISI, ++ .end = AT91SAM9263_ID_ISI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9263_isi_device = { ++ .name = "at91_isi", ++ .id = -1, ++ .resource = isi_resources, ++ .num_resources = ARRAY_SIZE(isi_resources), ++}; ++ ++void __init at91_add_device_isi(void) ++{ ++ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ ++ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ ++ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */ ++ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */ ++ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */ ++ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */ ++ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */ ++ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */ ++ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ ++ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ ++ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ ++ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ ++ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ ++ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ ++ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ ++ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ ++} ++#else ++void __init at91_add_device_isi(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * LCD Controller ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) ++static u64 lcdc_dmamask = 0xffffffffUL; ++static struct atmel_lcdfb_info lcdc_data; ++ ++static struct resource lcdc_resources[] = { ++ [0] = { ++ .start = AT91SAM9263_LCDC_BASE, ++ .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9263_ID_LCDC, ++ .end = AT91SAM9263_ID_LCDC, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91_lcdc_device = { ++ .name = "atmel_lcdfb", ++ .id = 0, ++ .dev = { ++ .dma_mask = &lcdc_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &lcdc_data, ++ }, ++ .resource = lcdc_resources, ++ .num_resources = ARRAY_SIZE(lcdc_resources), ++}; ++ ++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) ++{ ++ if (!data) ++ return; ++ ++ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ ++ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ ++ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ ++ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ ++ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ ++ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ ++ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ ++ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ ++ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ ++ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ ++ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ ++ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ ++ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ ++ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ ++ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ ++ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ ++ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ ++ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ ++ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ ++ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ ++ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ ++ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ ++ ++ lcdc_data = *data; ++ platform_device_register(&at91_lcdc_device); ++} ++#else ++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * LEDs + * -------------------------------------------------------------------- */ + +@@ -594,6 +771,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9rl.c linux-2.6-stable/arch/arm/mach-at91/at91sam9rl.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9rl.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9rl.c Fri May 11 15:48:14 2007 +@@ -0,0 +1,366 @@ ++/* ++ * arch/arm/mach-at91/at91sam9rl.c ++ * ++ * Copyright (C) 2005 SAN People ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ */ ++ ++#include <linux/module.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/arch/cpu.h> ++#include <asm/arch/at91sam9rl.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_rstc.h> ++ ++#include "generic.h" ++#include "clock.h" ++ ++static struct map_desc at91sam9rl_io_desc[] __initdata = { ++ { ++ .virtual = AT91_VA_BASE_SYS, ++ .pfn = __phys_to_pfn(AT91_BASE_SYS), ++ .length = SZ_16K, ++ .type = MT_DEVICE, ++ }, ++}; ++ ++static struct map_desc at91sam9rl_sram_desc[] __initdata = { ++ { ++ .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE), ++ .type = MT_DEVICE, ++ } ++}; ++ ++/* -------------------------------------------------------------------- ++ * Clocks ++ * -------------------------------------------------------------------- */ ++ ++/* ++ * The peripheral clocks. ++ */ ++static struct clk pioA_clk = { ++ .name = "pioA_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_PIOA, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk pioB_clk = { ++ .name = "pioB_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_PIOB, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk pioC_clk = { ++ .name = "pioC_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_PIOC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk pioD_clk = { ++ .name = "pioD_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_PIOD, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart0_clk = { ++ .name = "usart0_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_US0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart1_clk = { ++ .name = "usart1_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_US1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart2_clk = { ++ .name = "usart2_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_US2, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart3_clk = { ++ .name = "usart3_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_US3, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk mmc_clk = { ++ .name = "mci_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_MCI, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk twi0_clk = { ++ .name = "twi0_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_TWI0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk twi1_clk = { ++ .name = "twi1_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_TWI1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk spi_clk = { ++ .name = "spi_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_SPI, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc0_clk = { ++ .name = "ssc0_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_SSC0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ssc1_clk = { ++ .name = "ssc1_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_SSC1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk tc0_clk = { ++ .name = "tc0_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_TC0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk tc1_clk = { ++ .name = "tc1_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_TC1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk tc2_clk = { ++ .name = "tc2_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_TC2, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk pwmc_clk = { ++ .name = "pwmc_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_PWMC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk tsc_clk = { ++ .name = "tsc_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_TSC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk dma_clk = { ++ .name = "dma_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_DMA, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk udphs_clk = { ++ .name = "udphs_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_UDPHS, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk lcdc_clk = { ++ .name = "lcdc_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_LCDC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ac97_clk = { ++ .name = "ac97_clk", ++ .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++ ++static struct clk *periph_clocks[] __initdata = { ++ &pioA_clk, ++ &pioB_clk, ++ &pioC_clk, ++ &pioD_clk, ++ &usart0_clk, ++ &usart1_clk, ++ &usart2_clk, ++ &usart3_clk, ++ &mmc_clk, ++ &twi0_clk, ++ &twi1_clk, ++ &spi_clk, ++ &ssc0_clk, ++ &ssc1_clk, ++ &tc0_clk, ++ &tc1_clk, ++ &tc2_clk, ++ &pwmc_clk, ++ &tsc_clk, ++ &dma_clk, ++ &udphs_clk, ++ &lcdc_clk, ++ &ac97_clk, ++ // irq0 ++}; ++ ++/* ++ * The two programmable clocks. ++ * You must configure pin multiplexing to bring these signals out. ++ */ ++static struct clk pck0 = { ++ .name = "pck0", ++ .pmc_mask = AT91_PMC_PCK0, ++ .type = CLK_TYPE_PROGRAMMABLE, ++ .id = 0, ++}; ++static struct clk pck1 = { ++ .name = "pck1", ++ .pmc_mask = AT91_PMC_PCK1, ++ .type = CLK_TYPE_PROGRAMMABLE, ++ .id = 1, ++}; ++ ++static void __init at91sam9rl_register_clocks(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) ++ clk_register(periph_clocks[i]); ++ ++ clk_register(&pck0); ++ clk_register(&pck1); ++} ++ ++/* -------------------------------------------------------------------- ++ * GPIO ++ * -------------------------------------------------------------------- */ ++ ++static struct at91_gpio_bank at91sam9rl_gpio[] = { ++ { ++ .id = AT91SAM9RL_ID_PIOA, ++ .offset = AT91_PIOA, ++ .clock = &pioA_clk, ++ }, { ++ .id = AT91SAM9RL_ID_PIOB, ++ .offset = AT91_PIOB, ++ .clock = &pioB_clk, ++ }, { ++ .id = AT91SAM9RL_ID_PIOC, ++ .offset = AT91_PIOC, ++ .clock = &pioC_clk, ++ }, { ++ .id = AT91SAM9RL_ID_PIOD, ++ .offset = AT91_PIOD, ++ .clock = &pioD_clk, ++ } ++}; ++ ++static void at91sam9rl_reset(void) ++{ ++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); ++} ++ ++ ++/* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91sam9rl_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91SAM9RL_BASE_TCB0, ++ .irq = { AT91SAM9RL_ID_TC0, AT91SAM9RL_ID_TC1, AT91SAM9RL_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ } ++}; ++ ++#define at91sam9rl_tc_init() atmel_tc_init(at91sam9rl_tcblocks, ARRAY_SIZE(at91sam9rl_tcblocks)) ++ ++#else ++#define at91sam9rl_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * AT91SAM9RL processor initialization ++ * -------------------------------------------------------------------- */ ++ ++void __init at91sam9rl_initialize(unsigned long main_clock) ++{ ++ unsigned long cidr, sram_size; ++ ++ /* Map peripherals */ ++ iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc)); ++ ++ cidr = at91_sys_read(AT91_DBGU_CIDR); ++ ++ switch (cidr & AT91_CIDR_SRAMSIZ) { ++ case AT91_CIDR_SRAMSIZ_32K: ++ sram_size = 2 * SZ_16K; ++ break; ++ case AT91_CIDR_SRAMSIZ_16K: ++ default: ++ sram_size = SZ_16K; ++ } ++ ++ at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; ++ at91sam9rl_sram_desc->length = sram_size; ++ ++ /* Map SRAM */ ++ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); ++ ++ at91_arch_reset = at91sam9rl_reset; ++ at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); ++ ++ /* Init clock subsystem */ ++ at91_clock_init(main_clock); ++ ++ /* Register the processor-specific clocks */ ++ at91sam9rl_register_clocks(); ++ ++ /* Register GPIO subsystem */ ++ at91_gpio_init(at91sam9rl_gpio, 4); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9rl_tc_init(); ++} ++ ++/* -------------------------------------------------------------------- ++ * Interrupt initialization ++ * -------------------------------------------------------------------- */ ++ ++/* ++ * The default interrupt priority levels (0 = lowest, 7 = highest). ++ */ ++static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { ++ 7, /* Advanced Interrupt Controller */ ++ 7, /* System Peripherals */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller D */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ ++ 5, /* USART 3 */ ++ 0, /* Multimedia Card Interface */ ++ 6, /* Two-Wire Interface 0 */ ++ 6, /* Two-Wire Interface 1 */ ++ 5, /* Serial Peripheral Interface */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 0, /* Timer Counter 0 */ ++ 0, /* Timer Counter 1 */ ++ 0, /* Timer Counter 2 */ ++ 0, ++ 0, /* Touch Screen Controller */ ++ 0, /* DMA Controller */ ++ 2, /* USB Device High speed port */ ++ 2, /* LCD Controller */ ++ 6, /* AC97 Controller */ ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, /* Advanced Interrupt Controller */ ++}; ++ ++void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS]) ++{ ++ if (!priority) ++ priority = at91sam9rl_default_irq_priority; ++ ++ /* Initialize the AIC interrupt controller */ ++ at91_aic_init(priority); ++ ++ /* Enable GPIO interrupts */ ++ at91_gpio_irq_setup(); ++} +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9rl_devices.c +--- linux-2.6.21/arch/arm/mach-at91/at91sam9rl_devices.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/at91sam9rl_devices.c Fri May 11 16:03:25 2007 +@@ -0,0 +1,660 @@ ++/* ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ */ ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++ ++#include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91sam9rl.h> ++#include <asm/arch/at91sam9rl_matrix.h> ++#include <asm/arch/at91sam926x_mc.h> ++ ++#include "generic.h" ++ ++#define SZ_512 0x00000200 ++#define SZ_256 0x00000100 ++#define SZ_16 0x00000010 ++ ++ ++/* -------------------------------------------------------------------- ++ * MMC / SD ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) ++static u64 mmc_dmamask = 0xffffffffUL; ++static struct at91_mmc_data mmc_data; ++ ++static struct resource mmc_resources[] = { ++ [0] = { ++ .start = AT91SAM9RL_BASE_MCI, ++ .end = AT91SAM9RL_BASE_MCI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9RL_ID_MCI, ++ .end = AT91SAM9RL_ID_MCI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9rl_mmc_device = { ++ .name = "at91_mci", ++ .id = -1, ++ .dev = { ++ .dma_mask = &mmc_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &mmc_data, ++ }, ++ .resource = mmc_resources, ++ .num_resources = ARRAY_SIZE(mmc_resources), ++}; ++ ++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) ++{ ++ if (!data) ++ return; ++ ++ /* input/irq */ ++ if (data->det_pin) { ++ at91_set_gpio_input(data->det_pin, 1); ++ at91_set_deglitch(data->det_pin, 1); ++ } ++ if (data->wp_pin) ++ at91_set_gpio_input(data->wp_pin, 1); ++ if (data->vcc_pin) ++ at91_set_gpio_output(data->vcc_pin, 0); ++ ++ /* CLK */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); ++ ++ /* CMD */ ++ at91_set_A_periph(AT91_PIN_PA1, 1); ++ ++ /* DAT0, maybe DAT1..DAT3 */ ++ at91_set_A_periph(AT91_PIN_PA0, 1); ++ if (data->wire4) { ++ at91_set_A_periph(AT91_PIN_PA3, 1); ++ at91_set_A_periph(AT91_PIN_PA4, 1); ++ at91_set_A_periph(AT91_PIN_PA5, 1); ++ } ++ ++ mmc_data = *data; ++ platform_device_register(&at91sam9rl_mmc_device); ++} ++#else ++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * NAND / SmartMedia ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) ++static struct at91_nand_data nand_data; ++ ++#define NAND_BASE AT91_CHIPSELECT_3 ++ ++static struct resource nand_resources[] = { ++ { ++ .start = NAND_BASE, ++ .end = NAND_BASE + SZ_256M - 1, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct platform_device at91_nand_device = { ++ .name = "at91_nand", ++ .id = -1, ++ .dev = { ++ .platform_data = &nand_data, ++ }, ++ .resource = nand_resources, ++ .num_resources = ARRAY_SIZE(nand_resources), ++}; ++ ++void __init at91_add_device_nand(struct at91_nand_data *data) ++{ ++ unsigned long csa; ++ ++ if (!data) ++ return; ++ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); ++ ++ /* set the bus interface characteristics */ ++ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) ++ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); ++ ++ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) ++ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); ++ ++ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ ++ at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); ++ ++ /* enable pin */ ++ if (data->enable_pin) ++ at91_set_gpio_output(data->enable_pin, 1); ++ ++ /* ready/busy pin */ ++ if (data->rdy_pin) ++ at91_set_gpio_input(data->rdy_pin, 1); ++ ++ /* card detect pin */ ++ if (data->det_pin) ++ at91_set_gpio_input(data->det_pin, 1); ++ ++ at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ ++ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ ++ ++ nand_data = *data; ++ platform_device_register(&at91_nand_device); ++} ++ ++#else ++void __init at91_add_device_nand(struct at91_nand_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * TWI (i2c) ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) ++ ++static struct resource twi_resources[] = { ++ [0] = { ++ .start = AT91SAM9RL_BASE_TWI0, ++ .end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9RL_ID_TWI0, ++ .end = AT91SAM9RL_ID_TWI0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9rl_twi_device = { ++ .name = "at91_i2c", ++ .id = -1, ++ .resource = twi_resources, ++ .num_resources = ARRAY_SIZE(twi_resources), ++}; ++ ++void __init at91_add_device_i2c(void) ++{ ++ /* pins used for TWI interface */ ++ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ ++ at91_set_multi_drive(AT91_PIN_PA23, 1); ++ ++ at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */ ++ at91_set_multi_drive(AT91_PIN_PA24, 1); ++ ++ platform_device_register(&at91sam9rl_twi_device); ++} ++#else ++void __init at91_add_device_i2c(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * SPI ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) ++static u64 spi_dmamask = 0xffffffffUL; ++ ++static struct resource spi_resources[] = { ++ [0] = { ++ .start = AT91SAM9RL_BASE_SPI, ++ .end = AT91SAM9RL_BASE_SPI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9RL_ID_SPI, ++ .end = AT91SAM9RL_ID_SPI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9rl_spi_device = { ++ .name = "atmel_spi", ++ .id = 0, ++ .dev = { ++ .dma_mask = &spi_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = spi_resources, ++ .num_resources = ARRAY_SIZE(spi_resources), ++}; ++ ++static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 }; ++ ++ ++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) ++{ ++ int i; ++ unsigned long cs_pin; ++ ++ at91_set_A_periph(AT91_PIN_PA25, 0); /* MISO */ ++ at91_set_A_periph(AT91_PIN_PA26, 0); /* MOSI */ ++ at91_set_A_periph(AT91_PIN_PA27, 0); /* SPCK */ ++ ++ /* Enable SPI chip-selects */ ++ for (i = 0; i < nr_devices; i++) { ++ if (devices[i].controller_data) ++ cs_pin = (unsigned long) devices[i].controller_data; ++ else ++ cs_pin = spi_standard_cs[devices[i].chip_select]; ++ ++ /* enable chip-select pin */ ++ at91_set_gpio_output(cs_pin, 1); ++ ++ /* pass chip-select pin to driver */ ++ devices[i].controller_data = (void *) cs_pin; ++ } ++ ++ spi_register_board_info(devices, nr_devices); ++ platform_device_register(&at91sam9rl_spi_device); ++} ++#else ++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * LCD Controller ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) ++static u64 lcdc_dmamask = 0xffffffffUL; ++static struct atmel_lcdfb_info lcdc_data; ++ ++static struct resource lcdc_resources[] = { ++ [0] = { ++ .start = AT91SAM9RL_LCDC_BASE, ++ .end = AT91SAM9RL_LCDC_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9RL_ID_LCDC, ++ .end = AT91SAM9RL_ID_LCDC, ++ .flags = IORESOURCE_IRQ, ++ }, ++#if defined(CONFIG_FB_INTSRAM) ++ [2] = { ++ .start = AT91SAM9RL_SRAM_BASE, ++ .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++#endif ++}; ++ ++static struct platform_device at91_lcdc_device = { ++ .name = "atmel_lcdfb", ++ .id = 0, ++ .dev = { ++ .dma_mask = &lcdc_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &lcdc_data, ++ }, ++ .resource = lcdc_resources, ++ .num_resources = ARRAY_SIZE(lcdc_resources), ++}; ++ ++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) ++{ ++ if (!data) { ++ return; ++ } ++ ++#warning "Check this" ++ at91_set_B_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */ ++ at91_set_B_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */ ++ at91_set_B_periph(AT91_PIN_PC7, 0); /* LCDDEN */ ++ at91_set_B_periph(AT91_PIN_PC3, 0); /* LCDCC */ ++ at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */ ++ at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */ ++ at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */ ++ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */ ++ at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */ ++ at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */ ++ at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */ ++ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */ ++ at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */ ++ at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */ ++ at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */ ++ at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */ ++ at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */ ++ at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */ ++ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ ++ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ ++ ++ lcdc_data = *data; ++ platform_device_register(&at91_lcdc_device); ++} ++#else ++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * LEDs ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_LEDS) ++u8 at91_leds_cpu; ++u8 at91_leds_timer; ++ ++void __init at91_init_leds(u8 cpu_led, u8 timer_led) ++{ ++ /* Enable GPIO to access the LEDs */ ++ at91_set_gpio_output(cpu_led, 1); ++ at91_set_gpio_output(timer_led, 1); ++ ++ at91_leds_cpu = cpu_led; ++ at91_leds_timer = timer_led; ++} ++#else ++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} ++#endif ++ ++ ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * UART ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_SERIAL_ATMEL) ++static struct resource dbgu_resources[] = { ++ [0] = { ++ .start = AT91_VA_BASE_SYS + AT91_DBGU, ++ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91_ID_SYS, ++ .end = AT91_ID_SYS, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data dbgu_data = { ++ .use_dma_tx = 0, ++ .use_dma_rx = 0, /* DBGU not capable of receive DMA */ ++ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), ++}; ++ ++static struct platform_device at91sam9rl_dbgu_device = { ++ .name = "atmel_usart", ++ .id = 0, ++ .dev = { ++ .platform_data = &dbgu_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = dbgu_resources, ++ .num_resources = ARRAY_SIZE(dbgu_resources), ++}; ++ ++static inline void configure_dbgu_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */ ++} ++ ++static struct resource uart0_resources[] = { ++ [0] = { ++ .start = AT91SAM9RL_BASE_US0, ++ .end = AT91SAM9RL_BASE_US0 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9RL_ID_US0, ++ .end = AT91SAM9RL_ID_US0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart0_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9rl_uart0_device = { ++ .name = "atmel_usart", ++ .id = 1, ++ .dev = { ++ .platform_data = &uart0_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart0_resources, ++ .num_resources = ARRAY_SIZE(uart0_resources), ++}; ++ ++static inline void configure_usart0_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ ++ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ ++ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ ++} ++ ++static struct resource uart1_resources[] = { ++ [0] = { ++ .start = AT91SAM9RL_BASE_US1, ++ .end = AT91SAM9RL_BASE_US1 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9RL_ID_US1, ++ .end = AT91SAM9RL_ID_US1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart1_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9rl_uart1_device = { ++ .name = "atmel_usart", ++ .id = 2, ++ .dev = { ++ .platform_data = &uart1_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart1_resources, ++ .num_resources = ARRAY_SIZE(uart1_resources), ++}; ++ ++static inline void configure_usart1_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ ++} ++ ++static struct resource uart2_resources[] = { ++ [0] = { ++ .start = AT91SAM9RL_BASE_US2, ++ .end = AT91SAM9RL_BASE_US2 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9RL_ID_US2, ++ .end = AT91SAM9RL_ID_US2, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart2_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9rl_uart2_device = { ++ .name = "atmel_usart", ++ .id = 3, ++ .dev = { ++ .platform_data = &uart2_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart2_resources, ++ .num_resources = ARRAY_SIZE(uart2_resources), ++}; ++ ++static inline void configure_usart2_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ ++} ++ ++static struct resource uart3_resources[] = { ++ [0] = { ++ .start = AT91SAM9RL_BASE_US3, ++ .end = AT91SAM9RL_BASE_US3 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9RL_ID_US3, ++ .end = AT91SAM9RL_ID_US3, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart3_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9rl_uart3_device = { ++ .name = "atmel_usart", ++ .id = 4, ++ .dev = { ++ .platform_data = &uart3_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart3_resources, ++ .num_resources = ARRAY_SIZE(uart3_resources), ++}; ++ ++static inline void configure_usart3_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */ ++ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */ ++} ++ ++struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ ++struct platform_device *atmel_default_console_device; /* the serial console device */ ++ ++void __init at91_init_serial(struct at91_uart_config *config) ++{ ++ int i; ++ ++ /* Fill in list of supported UARTs */ ++ for (i = 0; i < config->nr_tty; i++) { ++ switch (config->tty_map[i]) { ++ case 0: ++ configure_usart0_pins(); ++ at91_uarts[i] = &at91sam9rl_uart0_device; ++ at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart"); ++ break; ++ case 1: ++ configure_usart1_pins(); ++ at91_uarts[i] = &at91sam9rl_uart1_device; ++ at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart"); ++ break; ++ case 2: ++ configure_usart2_pins(); ++ at91_uarts[i] = &at91sam9rl_uart2_device; ++ at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart"); ++ break; ++ case 3: ++ configure_usart3_pins(); ++ at91_uarts[i] = &at91sam9rl_uart3_device; ++ at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart"); ++ break; ++ case 4: ++ configure_dbgu_pins(); ++ at91_uarts[i] = &at91sam9rl_dbgu_device; ++ at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart"); ++ break; ++ default: ++ continue; ++ } ++ at91_uarts[i]->id = i; /* update ID number to mapped ID */ ++ } ++ ++ /* Set serial console device */ ++ if (config->console_tty < ATMEL_MAX_UART) ++ atmel_default_console_device = at91_uarts[config->console_tty]; ++ if (!atmel_default_console_device) ++ printk(KERN_INFO "AT91: No default serial console defined.\n"); ++} ++ ++void __init at91_add_device_serial(void) ++{ ++ int i; ++ ++ for (i = 0; i < ATMEL_MAX_UART; i++) { ++ if (at91_uarts[i]) ++ platform_device_register(at91_uarts[i]); ++ } ++} ++#else ++void __init at91_init_serial(struct at91_uart_config *config) {} ++void __init at91_add_device_serial(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- */ ++ ++/* ++ * These devices are always present and don't need any board-specific ++ * setup. ++ */ ++static int __init at91_add_standard_devices(void) ++{ ++ return 0; ++} ++ ++arch_initcall(at91_add_standard_devices); +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-cam60.c linux-2.6-stable/arch/arm/mach-at91/board-cam60.c +--- linux-2.6.21/arch/arm/mach-at91/board-cam60.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/board-cam60.c Tue May 8 12:13:30 2007 +@@ -0,0 +1,148 @@ ++/* ++ * KwikByte CAM60 ++ * ++ * based on board-sam9260ek.c ++ * Copyright (C) 2005 SAN People ++ * Copyright (C) 2006 Atmel ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/spi/flash.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91sam926x_mc.h> ++ ++#include "generic.h" ++ ++ ++/* ++ * Serial port configuration. ++ * 0 .. 5 = USART0 .. USART5 ++ * 6 = DBGU ++ */ ++static struct at91_uart_config __initdata cam60_uart_config = { ++ .console_tty = 0, /* ttyS0 */ ++ .nr_tty = 1, ++ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */ ++}; ++ ++static void __init cam60_map_io(void) ++{ ++ /* Initialize processor: 10 MHz crystal */ ++ at91sam9260_initialize(10000000); ++ ++ /* Setup the serial ports and console */ ++ at91_init_serial(&cam60_uart_config); ++} ++ ++static void __init cam60_init_irq(void) ++{ ++ at91sam9260_init_interrupts(NULL); ++} ++ ++ ++/* ++ * SPI devices. ++ */ ++#if defined(CONFIG_MTD_DATAFLASH) ++static struct mtd_partition __initdata cam60_spi_partitions[] = { ++ { ++ .name = "BOOT1", ++ .offset = 0, ++ .size = 4 * 1056, ++ }, ++ { ++ .name = "BOOT2", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 256 * 1056, ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 2222 * 1056, ++ }, ++ { ++ .name = "file system", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct flash_platform_data __initdata cam60_spi_flash_platform_data = { ++ .name = "spi_flash", ++ .parts = cam60_spi_partitions, ++ .nr_parts = ARRAY_SIZE(cam60_spi_partitions) ++}; ++#endif ++ ++static struct spi_board_info cam60_spi_devices[] = { ++#if defined(CONFIG_MTD_DATAFLASH) ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ .bus_num = 0, ++ .platform_data = &cam60_spi_flash_platform_data ++ }, ++#endif ++}; ++ ++ ++/* ++ * MACB Ethernet device ++ */ ++static struct __initdata at91_eth_data cam60_macb_data = { ++ .phy_irq_pin = AT91_PIN_PB5, ++ .is_rmii = 0, ++}; ++ ++ ++static void __init cam60_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* SPI */ ++ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); ++ /* Ethernet */ ++ at91_add_device_eth(&cam60_macb_data); ++} ++ ++MACHINE_START(CAM60, "KwikByte CAM60") ++ /* Maintainer: KwikByte */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91sam926x_timer, ++ .map_io = cam60_map_io, ++ .init_irq = cam60_init_irq, ++ .init_machine = cam60_board_init, ++MACHINE_END +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-chub.c linux-2.6-stable/arch/arm/mach-at91/board-chub.c +--- linux-2.6.21/arch/arm/mach-at91/board-chub.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/board-chub.c Tue May 8 12:13:30 2007 +@@ -0,0 +1,132 @@ ++/* ++ * linux/arch/arm/mach-at91/board-chub.c ++ * ++ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board ++ * by Kuten Ivan ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++#include "generic.h" ++ ++/* ++ * Serial port configuration. ++ * 0 .. 3 = USART0 .. USART3 ++ * 4 = DBGU ++ */ ++static struct at91_uart_config __initdata chub_uart_config = { ++ .console_tty = 0, /* ttyS0 */ ++ .nr_tty = 5, ++ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */ ++}; ++ ++static void __init chub_init_irq(void) ++{ ++ at91rm9200_init_interrupts(NULL); ++} ++ ++static void __init chub_map_io(void) ++{ ++ /* Initialize clocks: 18.432 MHz crystal */ ++ at91rm9200_initialize(18432000, AT91RM9200_PQFP); ++ ++ /* Setup the serial ports and console */ ++ at91_init_serial(&chub_uart_config); ++} ++ ++static struct at91_eth_data __initdata chub_eth_data = { ++ .phy_irq_pin = AT91_PIN_PB29, ++ .is_rmii = 0, ++}; ++ ++static struct mtd_partition __initdata chub_nand_partition[] = { ++ { ++ .name = "NAND Partition 1", ++ .offset = 0, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct mtd_partition *nand_partitions(int size, int *num_partitions) ++{ ++ *num_partitions = ARRAY_SIZE(chub_nand_partition); ++ return chub_nand_partition; ++} ++ ++static struct at91_nand_data __initdata chub_nand_data = { ++ .ale = 22, ++ .cle = 21, ++ .enable_pin = AT91_PIN_PA27, ++ .partition_info = nand_partitions, ++}; ++ ++static struct spi_board_info chub_spi_devices[] = { ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ }, ++}; ++ ++static void __init chub_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* I2C */ ++ at91_add_device_i2c(); ++ /* Ethernet */ ++ at91_add_device_eth(&chub_eth_data); ++ /* SPI */ ++ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices)); ++ /* NAND Flash */ ++ at91_add_device_nand(&chub_nand_data); ++ /* Disable write protect for NAND */ ++ at91_set_gpio_output(AT91_PIN_PB7, 1); ++ /* Power enable for 3x RS-232 and 1x RS-485 */ ++ at91_set_gpio_output(AT91_PIN_PB9, 1); ++ /* Disable write protect for FRAM */ ++ at91_set_gpio_output(AT91_PIN_PA21, 1); ++ /* Disable write protect for Dataflash */ ++ at91_set_gpio_output(AT91_PIN_PA19, 1); ++} ++ ++MACHINE_START(CHUB, "Promwad Chub") ++ /* Maintainer: Ivan Kuten AT Promwad DOT com */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91rm9200_timer, ++ .map_io = chub_map_io, ++ .init_irq = chub_init_irq, ++ .init_machine = chub_board_init, ++MACHINE_END +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-csb337.c linux-2.6-stable/arch/arm/mach-at91/board-csb337.c +--- linux-2.6.21/arch/arm/mach-at91/board-csb337.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/board-csb337.c Tue May 8 12:13:30 2007 +@@ -24,6 +24,7 @@ + #include <linux/module.h> + #include <linux/platform_device.h> + #include <linux/spi/spi.h> ++#include <linux/interrupt.h> + #include <linux/mtd/physmap.h> + + #include <asm/hardware.h> +@@ -59,6 +60,7 @@ + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); ++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */ + + /* Setup the serial ports and console */ + at91_init_serial(&csb337_uart_config); +@@ -149,6 +151,55 @@ + .num_resources = ARRAY_SIZE(csb_flash_resources), + }; + ++static struct at91_gpio_led csb337_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PB0, ++ .trigger = "heartbeat", ++ }, ++ { ++ .name = "led1", ++ .gpio = AT91_PIN_PB1, ++ .trigger = "timer", ++ }, ++ { ++ .name = "led2", ++ .gpio = AT91_PIN_PB2, ++ } ++}; ++ ++#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1) ++static irqreturn_t switch_irq_handler(int irq, void *context) ++{ ++ return IRQ_HANDLED; ++} ++ ++static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode) ++{ ++ int res; ++ ++ res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL); ++ if (res == 0) ++ enable_irq_wake(irq); ++} ++ ++static void __init csb300_switches(void) ++{ ++#ifdef CONFIG_CSB300_WAKE_SW0 ++ at91_set_A_periph(AT91_PIN_PB29, 1); /* IRQ0 */ ++ switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING); ++#endif ++#ifdef CONFIG_CSB300_WAKE_SW1 ++ at91_set_gpio_input(AT91_PIN_PB28, 1); ++ at91_set_deglitch(AT91_PIN_PB28, 1); ++ switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING); ++#endif ++ /* there's also SW2 at PA21, GPIO or TIOA2 */ ++} ++#else ++static void __init csb300_switches(void) {} ++#endif ++ + static void __init csb337_board_init(void) + { + /* Serial */ +@@ -168,8 +219,12 @@ + at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &csb337_mmc_data); ++ /* LEDS */ ++ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds)); + /* NOR flash */ + platform_device_register(&csb_flash); ++ /* Switches on CSB300 */ ++ csb300_switches(); + } + + MACHINE_START(CSB337, "Cogent CSB337") +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-dk.c linux-2.6-stable/arch/arm/mach-at91/board-dk.c +--- linux-2.6.21/arch/arm/mach-at91/board-dk.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/board-dk.c Tue May 8 14:29:12 2007 +@@ -73,6 +73,185 @@ + at91rm9200_init_interrupts(NULL); + } + ++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) ++#include <video/s1d13xxxfb.h> ++#include <asm/arch/ics1523.h> ++ ++/* EPSON S1D13806 FB */ ++#define AT91_FB_REG_BASE 0x30000000L ++#define AT91_FB_REG_SIZE 0x200 ++#define AT91_FB_VMEM_BASE 0x30200000L ++#define AT91_FB_VMEM_SIZE 0x140000L ++ ++static void __init dk_init_video(void) ++{ ++ /* NWAIT Signal */ ++ at91_set_A_periph(AT91_PIN_PC6, 0); ++ ++ /* Initialization of the Static Memory Controller for Chip Select 2 */ ++ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */ ++ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */ ++ | AT91_SMC_TDF_(1) /* float time */ ++ ); ++ ++ at91_ics1523_init(); ++} ++ ++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz) ++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */ ++static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = { ++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */ ++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */ ++ {S1DREG_GPIO_CNF0, 0x00}, ++ {S1DREG_GPIO_CNF1, 0x00}, ++ {S1DREG_GPIO_CTL0, 0x08}, ++ {S1DREG_GPIO_CTL1, 0x00}, ++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/ ++ {S1DREG_LCD_CLK_CNF, 0x00}, ++ {S1DREG_CRT_CLK_CNF, 0x00}, ++ {S1DREG_MPLUG_CLK_CNF, 0x00}, ++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */ ++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */ ++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */ ++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */ ++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */ ++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */ ++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */ ++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */ ++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */ ++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */ ++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */ ++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, ++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */ ++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */ ++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */ ++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */ ++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */ ++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */ ++ {S1DREG_LCD_DISP_START0, 0x00}, ++ {S1DREG_LCD_DISP_START1, 0xC8}, ++ {S1DREG_LCD_DISP_START2, 0x00}, ++ {S1DREG_LCD_MEM_OFF0, 0x80}, ++ {S1DREG_LCD_MEM_OFF1, 0x02}, ++ {S1DREG_LCD_PIX_PAN, 0x00}, ++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B}, ++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C}, ++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */ ++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */ ++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */ ++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */ ++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, ++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */ ++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */ ++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */ ++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */ ++ {S1DREG_TV_OUT_CTL, 0x10}, ++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */ ++ {S1DREG_CRT_DISP_START0, 0x00}, ++ {S1DREG_CRT_DISP_START1, 0x00}, ++ {S1DREG_CRT_DISP_START2, 0x00}, ++ {S1DREG_CRT_MEM_OFF0, 0x80}, ++ {S1DREG_CRT_MEM_OFF1, 0x02}, ++ {S1DREG_CRT_PIX_PAN, 0x00}, ++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B}, ++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C}, ++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */ ++ {S1DREG_LCD_CUR_START, 0x01}, ++ {S1DREG_LCD_CUR_XPOS0, 0x00}, ++ {S1DREG_LCD_CUR_XPOS1, 0x00}, ++ {S1DREG_LCD_CUR_YPOS0, 0x00}, ++ {S1DREG_LCD_CUR_YPOS1, 0x00}, ++ {S1DREG_LCD_CUR_BCTL0, 0x00}, ++ {S1DREG_LCD_CUR_GCTL0, 0x00}, ++ {S1DREG_LCD_CUR_RCTL0, 0x00}, ++ {S1DREG_LCD_CUR_BCTL1, 0x1F}, ++ {S1DREG_LCD_CUR_GCTL1, 0x3F}, ++ {S1DREG_LCD_CUR_RCTL1, 0x1F}, ++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, ++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */ ++ {S1DREG_CRT_CUR_START, 0x01}, ++ {S1DREG_CRT_CUR_XPOS0, 0x00}, ++ {S1DREG_CRT_CUR_XPOS1, 0x00}, ++ {S1DREG_CRT_CUR_YPOS0, 0x00}, ++ {S1DREG_CRT_CUR_YPOS1, 0x00}, ++ {S1DREG_CRT_CUR_BCTL0, 0x00}, ++ {S1DREG_CRT_CUR_GCTL0, 0x00}, ++ {S1DREG_CRT_CUR_RCTL0, 0x00}, ++ {S1DREG_CRT_CUR_BCTL1, 0x1F}, ++ {S1DREG_CRT_CUR_GCTL1, 0x3F}, ++ {S1DREG_CRT_CUR_RCTL1, 0x1F}, ++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, ++ {S1DREG_BBLT_CTL0, 0x00}, ++ {S1DREG_BBLT_CTL0, 0x00}, ++ {S1DREG_BBLT_CC_EXP, 0x00}, ++ {S1DREG_BBLT_OP, 0x00}, ++ {S1DREG_BBLT_SRC_START0, 0x00}, ++ {S1DREG_BBLT_SRC_START1, 0x00}, ++ {S1DREG_BBLT_SRC_START2, 0x00}, ++ {S1DREG_BBLT_DST_START0, 0x00}, ++ {S1DREG_BBLT_DST_START1, 0x00}, ++ {S1DREG_BBLT_DST_START2, 0x00}, ++ {S1DREG_BBLT_MEM_OFF0, 0x00}, ++ {S1DREG_BBLT_MEM_OFF1, 0x00}, ++ {S1DREG_BBLT_WIDTH0, 0x00}, ++ {S1DREG_BBLT_WIDTH1, 0x00}, ++ {S1DREG_BBLT_HEIGHT0, 0x00}, ++ {S1DREG_BBLT_HEIGHT1, 0x00}, ++ {S1DREG_BBLT_BGC0, 0x00}, ++ {S1DREG_BBLT_BGC1, 0x00}, ++ {S1DREG_BBLT_FGC0, 0x00}, ++ {S1DREG_BBLT_FGC1, 0x00}, ++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */ ++ {S1DREG_LKUP_ADDR, 0x00}, ++ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */ ++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */ ++ {S1DREG_CPU2MEM_WDOGT, 0x00}, ++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */ ++}; ++ ++static struct s1d13xxxfb_pdata dk_s1dfb_pdata = { ++ .initregs = dk_s1dfb_initregs, ++ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs), ++ .platform_init_video = dk_init_video, ++}; ++ ++static u64 s1dfb_dmamask = 0xffffffffUL; ++ ++static struct resource dk_s1dfb_resource[] = { ++ [0] = { /* video mem */ ++ .name = "s1d13806 memory", ++ .start = AT91_FB_VMEM_BASE, ++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { /* video registers */ ++ .name = "s1d13806 registers", ++ .start = AT91_FB_REG_BASE, ++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static struct platform_device dk_s1dfb_device = { ++ .name = "s1d13806fb", ++ .id = -1, ++ .dev = { ++ .dma_mask = &s1dfb_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &dk_s1dfb_pdata, ++ }, ++ .resource = dk_s1dfb_resource, ++ .num_resources = ARRAY_SIZE(dk_s1dfb_resource), ++}; ++ ++static void __init dk_add_device_video(void) ++{ ++ platform_device_register(&dk_s1dfb_device); ++} ++#else ++static void __init dk_add_device_video(void) {} ++#endif ++ + static struct at91_eth_data __initdata dk_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +@@ -151,7 +330,7 @@ + #define DK_FLASH_SIZE 0x200000 + + static struct physmap_flash_data dk_flash_data = { +- .width = 2, ++ .width = 2, + }; + + static struct resource dk_flash_resource = { +@@ -170,6 +349,13 @@ + .num_resources = 1, + }; + ++static struct at91_gpio_led dk_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PB2, ++ .trigger = "timer", ++ } ++}; + + static void __init dk_board_init(void) + { +@@ -200,8 +386,10 @@ + at91_add_device_nand(&dk_nand_data); + /* NOR Flash */ + platform_device_register(&dk_flash); ++ /* LEDs */ ++ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); + /* VGA */ +-// dk_add_device_video(); ++ dk_add_device_video(); + } + + MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-ek.c linux-2.6-stable/arch/arm/mach-at91/board-ek.c +--- linux-2.6.21/arch/arm/mach-at91/board-ek.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/board-ek.c Tue May 8 14:29:22 2007 +@@ -73,6 +73,187 @@ + at91rm9200_init_interrupts(NULL); + } + ++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) ++#include <video/s1d13xxxfb.h> ++#include <asm/arch/ics1523.h> ++ ++/* EPSON S1D13806 FB */ ++#define AT91_FB_REG_BASE 0x40000000L ++#define AT91_FB_REG_SIZE 0x200 ++#define AT91_FB_VMEM_BASE 0x40200000L ++#define AT91_FB_VMEM_SIZE 0x140000L ++ ++static void __init ek_init_video(void) ++{ ++ /* NWAIT Signal */ ++ at91_set_A_periph(AT91_PIN_PC6, 0); ++ ++ /* Initialization of the Static Memory Controller for Chip Select 3 */ ++ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */ ++ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */ ++ | AT91_SMC_TDF_(1) /* float time */ ++ ); ++ ++ at91_ics1523_init(); ++} ++ ++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz) ++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */ ++static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = { ++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */ ++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */ ++ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00 ++ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08 ++ {S1DREG_GPIO_CTL0, 0x00}, ++ {S1DREG_GPIO_CTL1, 0x00}, ++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/ ++ {S1DREG_LCD_CLK_CNF, 0x00}, ++ {S1DREG_CRT_CLK_CNF, 0x00}, ++ {S1DREG_MPLUG_CLK_CNF, 0x00}, ++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */ ++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */ ++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */ ++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */ ++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */ ++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */ ++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */ ++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */ ++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */ ++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */ ++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */ ++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, ++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */ ++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */ ++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */ ++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */ ++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */ ++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */ ++ {S1DREG_LCD_DISP_START0, 0x00}, ++ {S1DREG_LCD_DISP_START1, 0xC8}, ++ {S1DREG_LCD_DISP_START2, 0x00}, ++ {S1DREG_LCD_MEM_OFF0, 0x80}, ++ {S1DREG_LCD_MEM_OFF1, 0x02}, ++ {S1DREG_LCD_PIX_PAN, 0x00}, ++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B}, ++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C}, ++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */ ++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */ ++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */ ++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */ ++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, ++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */ ++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */ ++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */ ++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */ ++ {S1DREG_TV_OUT_CTL, 0x10}, ++ {0x005E, 0x9F}, ++ {0x005F, 0x00}, ++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */ ++ {S1DREG_CRT_DISP_START0, 0x00}, ++ {S1DREG_CRT_DISP_START1, 0x00}, ++ {S1DREG_CRT_DISP_START2, 0x00}, ++ {S1DREG_CRT_MEM_OFF0, 0x80}, ++ {S1DREG_CRT_MEM_OFF1, 0x02}, ++ {S1DREG_CRT_PIX_PAN, 0x00}, ++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B}, ++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C}, ++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */ ++ {S1DREG_LCD_CUR_START, 0x01}, ++ {S1DREG_LCD_CUR_XPOS0, 0x00}, ++ {S1DREG_LCD_CUR_XPOS1, 0x00}, ++ {S1DREG_LCD_CUR_YPOS0, 0x00}, ++ {S1DREG_LCD_CUR_YPOS1, 0x00}, ++ {S1DREG_LCD_CUR_BCTL0, 0x00}, ++ {S1DREG_LCD_CUR_GCTL0, 0x00}, ++ {S1DREG_LCD_CUR_RCTL0, 0x00}, ++ {S1DREG_LCD_CUR_BCTL1, 0x1F}, ++ {S1DREG_LCD_CUR_GCTL1, 0x3F}, ++ {S1DREG_LCD_CUR_RCTL1, 0x1F}, ++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, ++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */ ++ {S1DREG_CRT_CUR_START, 0x01}, ++ {S1DREG_CRT_CUR_XPOS0, 0x00}, ++ {S1DREG_CRT_CUR_XPOS1, 0x00}, ++ {S1DREG_CRT_CUR_YPOS0, 0x00}, ++ {S1DREG_CRT_CUR_YPOS1, 0x00}, ++ {S1DREG_CRT_CUR_BCTL0, 0x00}, ++ {S1DREG_CRT_CUR_GCTL0, 0x00}, ++ {S1DREG_CRT_CUR_RCTL0, 0x00}, ++ {S1DREG_CRT_CUR_BCTL1, 0x1F}, ++ {S1DREG_CRT_CUR_GCTL1, 0x3F}, ++ {S1DREG_CRT_CUR_RCTL1, 0x1F}, ++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, ++ {S1DREG_BBLT_CTL0, 0x00}, ++ {S1DREG_BBLT_CTL0, 0x00}, ++ {S1DREG_BBLT_CC_EXP, 0x00}, ++ {S1DREG_BBLT_OP, 0x00}, ++ {S1DREG_BBLT_SRC_START0, 0x00}, ++ {S1DREG_BBLT_SRC_START1, 0x00}, ++ {S1DREG_BBLT_SRC_START2, 0x00}, ++ {S1DREG_BBLT_DST_START0, 0x00}, ++ {S1DREG_BBLT_DST_START1, 0x00}, ++ {S1DREG_BBLT_DST_START2, 0x00}, ++ {S1DREG_BBLT_MEM_OFF0, 0x00}, ++ {S1DREG_BBLT_MEM_OFF1, 0x00}, ++ {S1DREG_BBLT_WIDTH0, 0x00}, ++ {S1DREG_BBLT_WIDTH1, 0x00}, ++ {S1DREG_BBLT_HEIGHT0, 0x00}, ++ {S1DREG_BBLT_HEIGHT1, 0x00}, ++ {S1DREG_BBLT_BGC0, 0x00}, ++ {S1DREG_BBLT_BGC1, 0x00}, ++ {S1DREG_BBLT_FGC0, 0x00}, ++ {S1DREG_BBLT_FGC1, 0x00}, ++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */ ++ {S1DREG_LKUP_ADDR, 0x00}, ++ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */ ++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */ ++ {S1DREG_CPU2MEM_WDOGT, 0x00}, ++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */ ++}; ++ ++static struct s1d13xxxfb_pdata ek_s1dfb_pdata = { ++ .initregs = ek_s1dfb_initregs, ++ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs), ++ .platform_init_video = ek_init_video, ++}; ++ ++static u64 s1dfb_dmamask = 0xffffffffUL; ++ ++static struct resource ek_s1dfb_resource[] = { ++ [0] = { /* video mem */ ++ .name = "s1d13806 memory", ++ .start = AT91_FB_VMEM_BASE, ++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { /* video registers */ ++ .name = "s1d13806 registers", ++ .start = AT91_FB_REG_BASE, ++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static struct platform_device ek_s1dfb_device = { ++ .name = "s1d13806fb", ++ .id = -1, ++ .dev = { ++ .dma_mask = &s1dfb_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &ek_s1dfb_pdata, ++ }, ++ .resource = ek_s1dfb_resource, ++ .num_resources = ARRAY_SIZE(ek_s1dfb_resource), ++}; ++ ++static void __init ek_add_device_video(void) ++{ ++ platform_device_register(&ek_s1dfb_device); ++} ++#else ++static void __init ek_add_device_video(void) {} ++#endif ++ + static struct at91_eth_data __initdata ek_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +@@ -113,7 +294,7 @@ + #define EK_FLASH_SIZE 0x200000 + + static struct physmap_flash_data ek_flash_data = { +- .width = 2, ++ .width = 2, + }; + + static struct resource ek_flash_resource = { +@@ -132,6 +313,18 @@ + .num_resources = 1, + }; + ++static struct at91_gpio_led ek_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PB1, ++ .trigger = "heartbeat", ++ }, ++ { ++ .name = "led1", ++ .gpio = AT91_PIN_PB2, ++ .trigger = "timer", ++ } ++}; + + static void __init ek_board_init(void) + { +@@ -158,8 +351,10 @@ + #endif + /* NOR Flash */ + platform_device_register(&ek_flash); ++ /* LEDs */ ++ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* VGA */ +-// ek_add_device_video(); ++ ek_add_device_video(); + } + + MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-kb9202.c linux-2.6-stable/arch/arm/mach-at91/board-kb9202.c +--- linux-2.6.21/arch/arm/mach-at91/board-kb9202.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/board-kb9202.c Tue May 8 12:21:31 2007 +@@ -37,6 +37,8 @@ + #include <asm/arch/board.h> + #include <asm/arch/gpio.h> + ++#include <asm/arch/at91rm9200_mc.h> ++ + #include "generic.h" + + +@@ -111,6 +113,48 @@ + .partition_info = nand_partitions, + }; + ++ ++#if defined(CONFIG_FB_S1D15605) ++#warning "Rather pass reset pin via platform_data" ++static struct resource kb9202_lcd_resources[] = { ++ [0] = { ++ .start = AT91_CHIPSELECT_2, ++ .end = AT91_CHIPSELECT_2 + 0x200FF, ++ .flags = IORESOURCE_MEM ++ }, ++ [1] = { /* reset pin */ ++ .start = AT91_PIN_PC22, ++ .end = AT91_PIN_PC22, ++ .flags = IORESOURCE_MEM ++ }, ++}; ++ ++static struct platform_device kb9202_lcd_device = { ++ .name = "s1d15605fb", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(kb9202_lcd_resources), ++ .resource = kb9202_lcd_resources, ++}; ++ ++static void __init kb9202_add_device_lcd(void) ++{ ++ /* In case the boot loader did not set the chip select mode and timing */ ++ at91_sys_write(AT91_SMC_CSR(2), ++ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 | ++ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1)); ++ ++ /* Backlight pin = output, off */ ++ at91_set_gpio_output(AT91_PIN_PC23, 0); ++ ++ /* Reset pin = output, in reset */ ++ at91_set_gpio_output(AT91_PIN_PC22, 0); ++ ++ platform_device_register(&kb9202_lcd_device); ++} ++#else ++static void __init kb9202_add_device_lcd(void) {} ++#endif ++ + static void __init kb9202_board_init(void) + { + /* Serial */ +@@ -129,6 +173,8 @@ + at91_add_device_spi(NULL, 0); + /* NAND */ + at91_add_device_nand(&kb9202_nand_data); ++ /* LCD */ ++ kb9202_add_device_lcd(); + } + + MACHINE_START(KB9200, "KB920x") +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9260ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9260ek.c +--- linux-2.6.21/arch/arm/mach-at91/board-sam9260ek.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/board-sam9260ek.c Tue May 8 12:13:30 2007 +@@ -104,9 +104,9 @@ + }, + #endif + #endif +-#if defined(CONFIG_SND_AT73C213) ++#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) + { /* AT73C213 DAC */ +- .modalias = "snd_at73c213", ++ .modalias = "at73c213", + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 1, +@@ -118,7 +118,7 @@ + /* + * MACB Ethernet device + */ +-static struct __initdata at91_eth_data ek_macb_data = { ++static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, + .is_rmii = 1, + }; +@@ -188,6 +188,8 @@ + at91_add_device_eth(&ek_macb_data); + /* MMC */ + at91_add_device_mmc(0, &ek_mmc_data); ++ /* I2C */ ++ at91_add_device_i2c(); + } + + MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9261ek.c +--- linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/board-sam9261ek.c Wed May 9 12:37:19 2007 +@@ -25,7 +25,11 @@ + #include <linux/module.h> + #include <linux/platform_device.h> + #include <linux/spi/spi.h> ++#include <linux/spi/ads7846.h> + #include <linux/dm9000.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/hardware.h> + #include <asm/setup.h> +@@ -59,6 +63,9 @@ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9261_initialize(18432000); + ++ /* Setup the LEDs */ ++ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); ++ + /* Setup the serial ports and console */ + at91_init_serial(&ek_uart_config); + } +@@ -195,6 +202,41 @@ + }; + + /* ++ * ADS7846 Touchscreen ++ */ ++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) ++ ++static int ads7843_pendown_state(void) ++{ ++ return !at91_get_gpio_value(AT91_PIN_PC2); /* Touchscreen PENIRQ */ ++} ++ ++static struct ads7846_platform_data ads_info = { ++ .model = 7843, ++ .x_min = 150, ++ .x_max = 3830, ++ .y_min = 190, ++ .y_max = 3830, ++ .vref_delay_usecs = 100, ++ .x_plate_ohms = 450, ++ .y_plate_ohms = 250, ++ .pressure_max = 15000, ++ .debounce_max = 1, ++ .debounce_rep = 0, ++ .debounce_tol = (~0), ++ .get_pendown_state = ads7843_pendown_state, ++}; ++ ++static void __init ek_add_device_ts(void) ++{ ++ at91_set_B_periph(AT91_PIN_PC2, 1); /* External IRQ0, with pullup */ ++ at91_set_gpio_input(AT91_PIN_PA11, 1); /* Touchscreen BUSY signal */ ++} ++#else ++static void __init ek_add_device_ts(void) {} ++#endif ++ ++/* + * SPI devices + */ + static struct spi_board_info ek_spi_devices[] = { +@@ -204,6 +246,17 @@ + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, ++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) ++ { ++ .modalias = "ads7846", ++ .chip_select = 2, ++ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ ++ .bus_num = 0, ++ .platform_data = &ads_info, ++ .irq = AT91SAM9261_ID_IRQ0, ++ .controller_data = AT91_PIN_PA28, /* CS pin */ ++ }, ++#endif + #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) + { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */ + .modalias = "mtd_dataflash", +@@ -211,9 +264,9 @@ + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +-#elif defined(CONFIG_SND_AT73C213) ++#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) + { /* AT73C213 DAC */ +- .modalias = "snd_at73c213", ++ .modalias = "at73c213", + .chip_select = 3, + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, +@@ -222,6 +275,65 @@ + }; + + ++/* ++ * LCD Controller ++ */ ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) ++static struct fb_videomode at91_tft_vga_modes[] = { ++ { ++ .name = "TX09D50VM1CCA @ 60", ++ .refresh = 60, ++ .xres = 240, .yres = 320, ++ .pixclock = KHZ2PICOS(4965), ++ ++ .left_margin = 1, .right_margin = 33, ++ .upper_margin = 1, .lower_margin = 0, ++ .hsync_len = 5, .vsync_len = 1, ++ ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ }, ++}; ++ ++static struct fb_monspecs at91fb_default_monspecs = { ++ .manufacturer = "HIT", ++ .monitor = "TX09D50VM1CCA", ++ ++ .modedb = at91_tft_vga_modes, ++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), ++ .hfmin = 15000, ++ .hfmax = 64000, ++ .vfmin = 50, ++ .vfmax = 150, ++}; ++ ++#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ ++ | ATMEL_LCDC_DISTYPE_TFT \ ++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) ++ ++static void at91_lcdc_power_control(int on) ++{ ++ if (on) ++ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ ++ else ++ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ ++} ++ ++/* Driver datas */ ++static struct atmel_lcdfb_info __initdata ek_lcdc_data = { ++ .default_bpp = 16, ++ .default_dmacon = ATMEL_LCDC_DMAEN, ++ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2, ++ .default_monspecs = &at91fb_default_monspecs, ++ .atmel_lcdfb_power_control = at91_lcdc_power_control, ++ .guard_time = 1, ++}; ++ ++#else ++static struct atmel_lcdfb_info __initdata ek_lcdc_data; ++#endif ++ ++ + static void __init ek_board_init(void) + { + /* Serial */ +@@ -241,10 +353,14 @@ + #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); ++ /* Touchscreen */ ++ ek_add_device_ts(); + #else + /* MMC */ + at91_add_device_mmc(0, &ek_mmc_data); + #endif ++ /* LCD Controller */ ++ at91_add_device_lcdc(&ek_lcdc_data); + } + + MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9263ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9263ek.c +--- linux-2.6.21/arch/arm/mach-at91/board-sam9263ek.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/board-sam9263ek.c Tue May 8 12:56:33 2007 +@@ -25,6 +25,10 @@ + #include <linux/module.h> + #include <linux/platform_device.h> + #include <linux/spi/spi.h> ++#include <linux/spi/ads7846.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/hardware.h> + #include <asm/setup.h> +@@ -86,6 +90,40 @@ + + + /* ++ * ADS7846 Touchscreen ++ */ ++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) ++static int ads7843_pendown_state(void) ++{ ++ return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */ ++} ++ ++static struct ads7846_platform_data ads_info = { ++ .model = 7843, ++ .x_min = 150, ++ .x_max = 3830, ++ .y_min = 190, ++ .y_max = 3830, ++ .vref_delay_usecs = 100, ++ .x_plate_ohms = 450, ++ .y_plate_ohms = 250, ++ .pressure_max = 15000, ++ .debounce_max = 1, ++ .debounce_rep = 0, ++ .debounce_tol = (~0), ++ .get_pendown_state = ads7843_pendown_state, ++}; ++ ++static void __init ek_add_device_ts(void) ++{ ++ at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */ ++ at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */ ++} ++#else ++static void __init ek_add_device_ts(void) {} ++#endif ++ ++/* + * SPI devices. + */ + static struct spi_board_info ek_spi_devices[] = { +@@ -97,6 +135,16 @@ + .bus_num = 0, + }, + #endif ++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) ++ { ++ .modalias = "ads7846", ++ .chip_select = 3, ++ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ ++ .bus_num = 0, ++ .platform_data = &ads_info, ++ .irq = AT91SAM9263_ID_IRQ1, ++ }, ++#endif + }; + + +@@ -112,6 +160,14 @@ + + + /* ++ * MACB Ethernet device ++ */ ++static struct at91_eth_data __initdata ek_macb_data = { ++ .is_rmii = 1, ++}; ++ ++ ++/* + * NAND flash + */ + static struct mtd_partition __initdata ek_nand_partition[] = { +@@ -148,6 +204,73 @@ + }; + + ++/* ++ * LCD Controller ++ */ ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) ++static struct fb_videomode at91_tft_vga_modes[] = { ++ { ++ .name = "TX09D50VM1CCA @ 60", ++ .refresh = 60, ++ .xres = 240, .yres = 320, ++ .pixclock = KHZ2PICOS(4965), ++ ++ .left_margin = 1, .right_margin = 33, ++ .upper_margin = 1, .lower_margin = 0, ++ .hsync_len = 5, .vsync_len = 1, ++ ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ }, ++}; ++ ++static struct fb_monspecs at91fb_default_monspecs = { ++ .manufacturer = "HIT", ++ .monitor = "TX09D70VM1CCA", ++ ++ .modedb = at91_tft_vga_modes, ++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), ++ .hfmin = 15000, ++ .hfmax = 64000, ++ .vfmin = 50, ++ .vfmax = 150, ++}; ++ ++#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ ++ | ATMEL_LCDC_DISTYPE_TFT \ ++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) ++ ++static void at91_lcdc_power_control(int on) ++{ ++ if (on) ++ at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */ ++ else ++ at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */ ++} ++ ++/* Driver datas */ ++static struct atmel_lcdfb_info __initdata ek_lcdc_data = { ++ .default_bpp = 16, ++ .default_dmacon = ATMEL_LCDC_DMAEN, ++ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, ++ .default_monspecs = &at91fb_default_monspecs, ++ .atmel_lcdfb_power_control = at91_lcdc_power_control, ++ .guard_time = 1, ++}; ++ ++#else ++static struct atmel_lcdfb_info __initdata ek_lcdc_data; ++#endif ++ ++ ++/* ++ * AC97 ++ */ ++static struct atmel_ac97_data ek_ac97_data = { ++ .reset_pin = AT91_PIN_PA13, ++}; ++ ++ + static void __init ek_board_init(void) + { + /* Serial */ +@@ -157,11 +280,22 @@ + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + /* SPI */ ++ at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); ++ /* Touchscreen */ ++ ek_add_device_ts(); + /* MMC */ + at91_add_device_mmc(1, &ek_mmc_data); ++ /* Ethernet */ ++ at91_add_device_eth(&ek_macb_data); + /* NAND */ + at91_add_device_nand(&ek_nand_data); ++ /* I2C */ ++ at91_add_device_i2c(); ++ /* LCD Controller */ ++ at91_add_device_lcdc(&ek_lcdc_data); ++ /* AC97 */ ++ at91_add_device_ac97(&ek_ac97_data); + } + + MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9rlek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9rlek.c +--- linux-2.6.21/arch/arm/mach-at91/board-sam9rlek.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/board-sam9rlek.c Wed May 9 10:58:34 2007 +@@ -0,0 +1,204 @@ ++/* ++ * Copyright (C) 2005 SAN People ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/fb.h> ++#include <linux/clk.h> ++ ++#include <video/atmel_lcdc.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91sam926x_mc.h> ++ ++#include "generic.h" ++ ++ ++/* ++ * Serial port configuration. ++ * 0 .. 3 = USART0 .. USART3 ++ * 4 = DBGU ++ */ ++static struct at91_uart_config __initdata ek_uart_config = { ++ .console_tty = 0, /* ttyS0 */ ++ .nr_tty = 2, ++ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ ++}; ++ ++static void __init ek_map_io(void) ++{ ++ /* Initialize processor: 12.000 MHz crystal */ ++ at91sam9rl_initialize(12000000); ++ ++ /* Setup the serial ports and console */ ++ at91_init_serial(&ek_uart_config); ++} ++ ++static void __init ek_init_irq(void) ++{ ++ at91sam9rl_init_interrupts(NULL); ++} ++ ++ ++/* ++ * MCI (SD/MMC) ++ */ ++static struct at91_mmc_data __initdata ek_mmc_data = { ++ .wire4 = 1, ++ .det_pin = AT91_PIN_PA15, ++// .wp_pin = ... not connected ++// .vcc_pin = ... not connected ++}; ++ ++ ++/* ++ * NAND flash ++ */ ++static struct mtd_partition __initdata ek_nand_partition[] = { ++ { ++ .name = "Partition 1", ++ .offset = 0, ++ .size = 256 * 1024, ++ }, ++ { ++ .name = "Partition 2", ++ .offset = 256 * 1024 , ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct mtd_partition *nand_partitions(int size, int *num_partitions) ++{ ++ *num_partitions = ARRAY_SIZE(ek_nand_partition); ++ return ek_nand_partition; ++} ++ ++static struct at91_nand_data __initdata ek_nand_data = { ++ .ale = 21, ++ .cle = 22, ++// .det_pin = ... not connected ++ .rdy_pin = AT91_PIN_PD17, ++ .enable_pin = AT91_PIN_PB6, ++ .partition_info = nand_partitions, ++ .bus_width_16 = 0, ++}; ++ ++ ++/* ++ * SPI devices ++ */ ++static struct spi_board_info ek_spi_devices[] = { ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ .bus_num = 0, ++ }, ++}; ++ ++ ++/* ++ * LCD Controller ++ */ ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) ++static struct fb_videomode at91_tft_vga_modes[] = { ++ { ++ .name = "TX09D50VM1CCA @ 60", ++ .refresh = 60, ++ .xres = 240, .yres = 320, ++ .pixclock = KHZ2PICOS(4965), ++ ++ .left_margin = 1, .right_margin = 33, ++ .upper_margin = 1, .lower_margin = 0, ++ .hsync_len = 5, .vsync_len = 1, ++ ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ }, ++}; ++ ++static struct fb_monspecs at91fb_default_monspecs = { ++ .manufacturer = "HIT", ++ .monitor = "TX09D50VM1CCA", ++ ++ .modedb = at91_tft_vga_modes, ++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), ++ .hfmin = 15000, ++ .hfmax = 64000, ++ .vfmin = 50, ++ .vfmax = 150, ++}; ++ ++#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ ++ | ATMEL_LCDC_DISTYPE_TFT \ ++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) ++ ++static void at91_lcdc_power_control(int on) ++{ ++ if (on) ++ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ ++ else ++ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ ++} ++ ++/* Driver datas */ ++static struct atmel_lcdfb_info __initdata ek_lcdc_data = { ++ .default_bpp = 16, ++ .default_dmacon = ATMEL_LCDC_DMAEN, ++ .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2, ++ .default_monspecs = &at91fb_default_monspecs, ++ .atmel_lcdfb_power_control = at91_lcdc_power_control, ++ .guard_time = 1, ++}; ++ ++#else ++static struct atmel_lcdfb_info __initdata ek_lcdc_data; ++#endif ++ ++ ++static void __init ek_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* I2C */ ++ at91_add_device_i2c(); ++ /* NAND */ ++ at91_add_device_nand(&ek_nand_data); ++ /* SPI */ ++ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); ++ /* MMC */ ++ at91_add_device_mmc(0, &ek_mmc_data); ++ /* LCD Controller */ ++ at91_add_device_lcdc(&ek_lcdc_data); ++} ++ ++MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") ++ /* Maintainer: Atmel */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91sam926x_timer, ++ .map_io = ek_map_io, ++ .init_irq = ek_init_irq, ++ .init_machine = ek_board_init, ++MACHINE_END +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/clock.c linux-2.6-stable/arch/arm/mach-at91/clock.c +--- linux-2.6.21/arch/arm/mach-at91/clock.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/clock.c Tue May 8 12:13:30 2007 +@@ -32,6 +32,7 @@ + #include <asm/arch/cpu.h> + + #include "clock.h" ++#include "generic.h" + + + /* +@@ -254,6 +255,23 @@ + + /*------------------------------------------------------------------------*/ + ++#ifdef CONFIG_PM ++ ++int clk_must_disable(struct clk *clk) ++{ ++ if (!at91_suspend_entering_slow_clock()) ++ return 0; ++ ++ while (clk->parent) ++ clk = clk->parent; ++ return clk != &clk32k; ++} ++EXPORT_SYMBOL(clk_must_disable); ++ ++#endif ++ ++/*------------------------------------------------------------------------*/ ++ + #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + + /* +@@ -375,6 +393,7 @@ + seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); + + seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); ++#warning "Hard-coded PCK" + for (i = 0; i < 4; i++) + seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i))); + seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/generic.h linux-2.6-stable/arch/arm/mach-at91/generic.h +--- linux-2.6.21/arch/arm/mach-at91/generic.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/generic.h Wed May 9 10:20:54 2007 +@@ -13,12 +13,14 @@ + extern void __init at91sam9260_initialize(unsigned long main_clock); + extern void __init at91sam9261_initialize(unsigned long main_clock); + extern void __init at91sam9263_initialize(unsigned long main_clock); ++extern void __init at91sam9rl_initialize(unsigned long main_clock); + + /* Interrupts */ + extern void __init at91rm9200_init_interrupts(unsigned int priority[]); + extern void __init at91sam9260_init_interrupts(unsigned int priority[]); + extern void __init at91sam9261_init_interrupts(unsigned int priority[]); + extern void __init at91sam9263_init_interrupts(unsigned int priority[]); ++extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); + extern void __init at91_aic_init(unsigned int priority[]); + + /* Timer */ +@@ -34,6 +36,7 @@ + /* Power Management */ + extern void at91_irq_suspend(void); + extern void at91_irq_resume(void); ++extern int at91_suspend_entering_slow_clock(void); + + /* GPIO */ + #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/ics1523.c linux-2.6-stable/arch/arm/mach-at91/ics1523.c +--- linux-2.6.21/arch/arm/mach-at91/ics1523.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/ics1523.c Tue May 8 12:13:30 2007 +@@ -0,0 +1,207 @@ ++/* ++ * arch/arm/mach-at91rm9200/ics1523.c ++ * ++ * Copyright (C) 2003 ATMEL Rousset ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <asm/hardware.h> ++#include <asm/io.h> ++ ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/init.h> ++ ++#include <asm/arch/ics1523.h> ++#include <asm/arch/at91_twi.h> ++#include <asm/arch/gpio.h> ++ ++/* TWI Errors */ ++#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE) ++ ++ ++static void __iomem *twi_base; ++ ++#define at91_twi_read(reg) __raw_readl(twi_base + (reg)) ++#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg)) ++ ++ ++/* ----------------------------------------------------------------------------- ++ * Initialization of TWI CLOCK ++ * ----------------------------------------------------------------------------- */ ++ ++static void at91_ics1523_SetTwiClock(unsigned int mck_khz) ++{ ++ int sclock; ++ ++ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */ ++ sclock = (10*mck_khz / ICS_TRANSFER_RATE); ++ if (sclock % 10 >= 5) ++ sclock = (sclock /10) - 5; ++ else ++ sclock = (sclock /10)- 6; ++ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */ ++ ++ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8)); ++} ++ ++/* ----------------------------------------------------------------------------- ++ * Read a byte with TWI Interface from the Clock Generator ICS1523 ++ * ----------------------------------------------------------------------------- */ ++ ++static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in) ++{ ++ int Status, nb_trial; ++ ++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR)); ++ at91_twi_write(AT91_TWI_IADR, reg_address); ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); ++ ++ /* Program temporizing period (300us) */ ++ udelay(300); ++ ++ /* Wait TXcomplete ... */ ++ nb_trial = 0; ++ Status = at91_twi_read(AT91_TWI_SR); ++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) { ++ nb_trial++; ++ Status = at91_twi_read(AT91_TWI_SR); ++ } ++ ++ if (Status & AT91_TWI_TXCOMP) { ++ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR); ++ return ICS1523_ACCESS_OK; ++ } ++ else ++ return ICS1523_ACCESS_ERROR; ++} ++ ++/* ----------------------------------------------------------------------------- ++ * Write a byte with TWI Interface to the Clock Generator ICS1523 ++ * ----------------------------------------------------------------------------- */ ++ ++static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out) ++{ ++ int Status, nb_trial; ++ ++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR)); ++ at91_twi_write(AT91_TWI_IADR, reg_address); ++ at91_twi_write(AT91_TWI_THR, data_out); ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); ++ ++ /* Program temporizing period (300us) */ ++ udelay(300); ++ ++ nb_trial = 0; ++ Status = at91_twi_read(AT91_TWI_SR); ++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) { ++ nb_trial++; ++ if (Status & AT91_TWI_ERROR) { ++ /* If Underrun OR NACK - Start again */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); ++ ++ /* Program temporizing period (300us) */ ++ udelay(300); ++ } ++ Status = at91_twi_read(AT91_TWI_SR); ++ }; ++ ++ if (Status & AT91_TWI_TXCOMP) ++ return ICS1523_ACCESS_OK; ++ else ++ return ICS1523_ACCESS_ERROR; ++} ++ ++/* ----------------------------------------------------------------------------- ++ * Initialization of the Clock Generator ICS1523 ++ * ----------------------------------------------------------------------------- */ ++ ++int at91_ics1523_init(void) ++{ ++ int nb_trial; ++ int ack = ICS1523_ACCESS_OK; ++ unsigned int status = 0xffffffff; ++ struct clk *twi_clk; ++ ++ /* Map in TWI peripheral */ ++ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K); ++ if (!twi_base) ++ return -ENOMEM; ++ ++ /* pins used for TWI interface */ ++ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */ ++ at91_set_multi_drive(AT91_PIN_PA25, 1); ++ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */ ++ at91_set_multi_drive(AT91_PIN_PA26, 1); ++ ++ /* Enable the TWI clock */ ++ twi_clk = clk_get(NULL, "twi_clk"); ++ if (IS_ERR(twi_clk)) ++ return ICS1523_ACCESS_ERROR; ++ clk_enable(twi_clk); ++ ++ /* Disable interrupts */ ++ at91_twi_write(AT91_TWI_IDR, -1); ++ ++ /* Reset peripheral */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); ++ ++ /* Set Master mode */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); ++ ++ /* Set TWI Clock Waveform Generator Register */ ++ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */ ++ ++ /* ICS1523 Initialisation */ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK)); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F)); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0); ++ ++ nb_trial = 0; ++ do { ++ nb_trial++; ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/)); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD)); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR)); ++ ++ /* Program 1ms temporizing period */ ++ mdelay(1); ++ ++ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status); ++ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10)); ++ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR)); ++ ++ /* Program 1ms temporizing period */ ++ mdelay(1); ++ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00); ++ ++ /* Program 1ms temporizing period */ ++ mdelay(1); ++ ++ /* All done - cleanup */ ++ iounmap(twi_base); ++ clk_disable(twi_clk); ++ clk_put(twi_clk); ++ ++ return ack; ++} +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/pm.c linux-2.6-stable/arch/arm/mach-at91/pm.c +--- linux-2.6.21/arch/arm/mach-at91/pm.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mach-at91/pm.c Tue May 8 12:13:31 2007 +@@ -63,6 +63,7 @@ + * Verify that all the clocks are correct before entering + * slow-clock mode. + */ ++#warning "SAM9260 only has 3 programmable clocks." + static int at91_pm_verify_clocks(void) + { + unsigned long scsr; +@@ -104,20 +105,15 @@ + } + + /* +- * Call this from platform driver suspend() to see how deeply to suspend. ++ * This is called from clk_must_disable(), to see how deeply to suspend. + * For example, some controllers (like OHCI) need one of the PLL clocks + * in order to act as a wakeup source, and those are not available when + * going into slow clock mode. +- * +- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have +- * the very same problem (but not using at91 main_clk), and it'd be better +- * to add one generic API rather than lots of platform-specific ones. + */ + int at91_suspend_entering_slow_clock(void) + { + return (target_state == PM_SUSPEND_MEM); + } +-EXPORT_SYMBOL(at91_suspend_entering_slow_clock); + + + static void (*slow_clock)(void); +@@ -207,16 +203,23 @@ + .enter = at91_pm_enter, + }; + ++#ifdef CONFIG_AT91_SLOW_CLOCK ++extern void at91rm9200_slow_clock(void); ++extern u32 at91rm9200_slow_clock_sz; ++#endif ++ + static int __init at91_pm_init(void) + { +- printk("AT91: Power Management\n"); +- +-#ifdef CONFIG_AT91_PM_SLOW_CLOCK +- /* REVISIT allocations of SRAM should be dynamically managed. ++#ifdef CONFIG_AT91_SLOW_CLOCK ++ /* ++ * REVISIT allocations of SRAM should be dynamically managed. + * FIQ handlers and other components will want SRAM/TCM too... + */ +- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K)); ++ slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K)); + memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz); ++ printk("AT91: Power Management (with slow clock mode)\n"); ++#else ++ printk("AT91: Power Management\n"); + #endif + + /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/pm_slowclock.S linux-2.6-stable/arch/arm/mach-at91/pm_slowclock.S +--- linux-2.6.21/arch/arm/mach-at91/pm_slowclock.S Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/pm_slowclock.S Tue May 8 12:13:31 2007 +@@ -0,0 +1,172 @@ ++/* ++ * arch/arm/mach-at91/pm_slow_clock.S ++ * ++ * Copyright (C) 2006 Savin Zlobec ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/linkage.h> ++#include <asm/hardware.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91rm9200_mc.h> ++ ++#define MCKRDY_TIMEOUT 1000 ++#define MOSCRDY_TIMEOUT 1000 ++#define PLLALOCK_TIMEOUT 1000 ++ ++ .macro wait_mckrdy ++ mov r2, #MCKRDY_TIMEOUT ++1: sub r2, r2, #1 ++ cmp r2, #0 ++ beq 2f ++ ldr r3, [r1, #AT91_PMC_SR] ++ tst r3, #AT91_PMC_MCKRDY ++ beq 1b ++2: ++ .endm ++ ++ .macro wait_moscrdy ++ mov r2, #MOSCRDY_TIMEOUT ++1: sub r2, r2, #1 ++ cmp r2, #0 ++ beq 2f ++ ldr r3, [r1, #AT91_PMC_SR] ++ tst r3, #AT91_PMC_MOSCS ++ beq 1b ++2: ++ .endm ++ ++ .macro wait_pllalock ++ mov r2, #PLLALOCK_TIMEOUT ++1: sub r2, r2, #1 ++ cmp r2, #0 ++ beq 2f ++ ldr r3, [r1, #AT91_PMC_SR] ++ tst r3, #AT91_PMC_LOCKA ++ beq 1b ++2: ++ .endm ++ ++ .macro wait_plladis ++ mov r2, #PLLALOCK_TIMEOUT ++1: sub r2, r2, #1 ++ cmp r2, #0 ++ beq 2f ++ ldr r3, [r1, #AT91_PMC_SR] ++ tst r3, #AT91_PMC_LOCKA ++ bne 1b ++2: ++ .endm ++ ++ .text ++ ++ENTRY(at91rm9200_slow_clock) ++ ++ ldr r1, .at91_va_base_sys ++ ++ /* Put SDRAM in self refresh mode */ ++ ++ b 1f ++ .align 5 ++1: mcr p15, 0, r0, c7, c10, 4 ++ mov r2, #1 ++ str r2, [r1, #AT91_SDRAMC_SRR] ++ ++ /* Save Master clock setting */ ++ ++ ldr r2, [r1, #AT91_PMC_MCKR] ++ str r2, .saved_mckr ++ ++ /* ++ * Set the Master clock source to slow clock ++ * ++ * First set the CSS field, wait for MCKRDY ++ * and than set the PRES and MDIV fields. ++ * ++ * See eratta #2[78] for details. ++ */ ++ ++ bic r2, r2, #3 ++ str r2, [r1, #AT91_PMC_MCKR] ++ ++ wait_mckrdy ++ ++ mov r2, #0 ++ str r2, [r1, #AT91_PMC_MCKR] ++ ++ /* Save PLLA setting and disable it */ ++ ++ ldr r2, [r1, #AT91_CKGR_PLLAR] ++ str r2, .saved_pllar ++ ++ mov r2, #0 ++ str r2, [r1, #AT91_CKGR_PLLAR] ++ ++ wait_plladis ++ ++ /* Turn off the main oscillator */ ++ ++ ldr r2, [r1, #AT91_CKGR_MOR] ++ bic r2, r2, #AT91_PMC_MOSCEN ++ str r2, [r1, #AT91_CKGR_MOR] ++ ++ /* Wait for interrupt */ ++ ++ mcr p15, 0, r0, c7, c0, 4 ++ ++ /* Turn on the main oscillator */ ++ ++ ldr r2, [r1, #AT91_CKGR_MOR] ++ orr r2, r2, #AT91_PMC_MOSCEN ++ str r2, [r1, #AT91_CKGR_MOR] ++ ++ wait_moscrdy ++ ++ /* Restore PLLA setting */ ++ ++ ldr r2, .saved_pllar ++ str r2, [r1, #AT91_CKGR_PLLAR] ++ ++ wait_pllalock ++ ++ /* ++ * Restore master clock setting ++ * ++ * First set PRES if it was not 0, ++ * than set CSS and MDIV fields. ++ * After every change wait for ++ * MCKRDY. ++ * ++ * See eratta #2[78] for details. ++ */ ++ ++ ldr r2, .saved_mckr ++ tst r2, #0x1C ++ beq 2f ++ and r2, r2, #0x1C ++ str r2, [r1, #AT91_PMC_MCKR] ++ ++ wait_mckrdy ++ ++2: ldr r2, .saved_mckr ++ str r2, [r1, #AT91_PMC_MCKR] ++ ++ wait_mckrdy ++ ++ mov pc, lr ++ ++.saved_mckr: ++ .word 0 ++ ++.saved_pllar: ++ .word 0 ++ ++.at91_va_base_sys: ++ .word AT91_VA_BASE_SYS ++ ++ENTRY(at91rm9200_slow_clock_sz) ++ .word .-at91rm9200_slow_clock +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/tclib.c linux-2.6-stable/arch/arm/mach-at91/tclib.c +--- linux-2.6.21/arch/arm/mach-at91/tclib.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/tclib.c Tue May 8 12:13:31 2007 +@@ -0,0 +1,17 @@ ++#include <linux/clk.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock *blocks; ++static int nblocks; ++ ++/* ++ * Called from the processor-specific init to register the TC Blocks. ++ */ ++void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n) ++{ ++ blocks = tcblocks; ++ nblocks = n; ++} +diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/tclib.h linux-2.6-stable/arch/arm/mach-at91/tclib.h +--- linux-2.6.21/arch/arm/mach-at91/tclib.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/arch/arm/mach-at91/tclib.h Tue May 8 12:13:31 2007 +@@ -0,0 +1,11 @@ ++ ++#define TC_PER_TCB 3 ++ ++struct atmel_tcblock { ++ u32 physaddr; ++ void __iomem *ioaddr; ++ struct clk *clk[TC_PER_TCB]; ++ int irq[TC_PER_TCB]; ++}; ++ ++extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n); +diff -urN -x CVS linux-2.6.21/arch/arm/mm/Kconfig linux-2.6-stable/arch/arm/mm/Kconfig +--- linux-2.6.21/arch/arm/mm/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/mm/Kconfig Wed May 9 10:20:54 2007 +@@ -171,8 +171,8 @@ + # ARM926T + config CPU_ARM926T + bool "Support ARM926T processor" +- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX +- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX ++ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX ++ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX + select CPU_32v5 + select CPU_ABRT_EV5TJ + select CPU_CACHE_VIVT +diff -urN -x CVS linux-2.6.21/arch/arm/tools/mach-types linux-2.6-stable/arch/arm/tools/mach-types +--- linux-2.6.21/arch/arm/tools/mach-types Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/arch/arm/tools/mach-types Tue May 8 12:13:31 2007 +@@ -1335,3 +1335,32 @@ + comtech_router MACH_COMTECH_ROUTER COMTECH_ROUTER 1327 + sbc2410x MACH_SBC2410X SBC2410X 1328 + at4x0bd MACH_AT4X0BD AT4X0BD 1329 ++cbifr MACH_CBIFR CBIFR 1330 ++arcom_quantum MACH_ARCOM_QUANTUM ARCOM_QUANTUM 1331 ++matrix520 MACH_MATRIX520 MATRIX520 1332 ++matrix510 MACH_MATRIX510 MATRIX510 1333 ++matrix500 MACH_MATRIX500 MATRIX500 1334 ++m501 MACH_M501 M501 1335 ++aaeon1270 MACH_AAEON1270 AAEON1270 1336 ++matrix500ev MACH_MATRIX500EV MATRIX500EV 1337 ++pac500 MACH_PAC500 PAC500 1338 ++pnx8181 MACH_PNX8181 PNX8181 1339 ++colibri320 MACH_COLIBRI320 COLIBRI320 1340 ++aztoolbb MACH_AZTOOLBB AZTOOLBB 1341 ++aztoolg2 MACH_AZTOOLG2 AZTOOLG2 1342 ++dvlhost MACH_DVLHOST DVLHOST 1343 ++zir9200 MACH_ZIR9200 ZIR9200 1344 ++zir9260 MACH_ZIR9260 ZIR9260 1345 ++cocopah MACH_COCOPAH COCOPAH 1346 ++nds MACH_NDS NDS 1347 ++rosencrantz MACH_ROSENCRANTZ ROSENCRANTZ 1348 ++fttx_odsc MACH_FTTX_ODSC FTTX_ODSC 1349 ++classe_r6904 MACH_CLASSE_R6904 CLASSE_R6904 1350 ++cam60 MACH_CAM60 CAM60 1351 ++mxc30031ads MACH_MXC30031ADS MXC30031ADS 1352 ++datacall MACH_DATACALL DATACALL 1353 ++at91eb01 MACH_AT91EB01 AT91EB01 1354 ++rty MACH_RTY RTY 1355 ++dwl2100 MACH_DWL2100 DWL2100 1356 ++vinsi MACH_VINSI VINSI 1357 ++db88f5281 MACH_DB88F5281 DB88F5281 1358 +diff -urN -x CVS linux-2.6.21/drivers/char/Kconfig linux-2.6-stable/drivers/char/Kconfig +--- linux-2.6.21/drivers/char/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/char/Kconfig Tue May 8 14:31:24 2007 +@@ -1071,5 +1071,21 @@ + /sys/devices/platform/telco_clock, with a number of files for + controlling the behavior of this hardware. + ++config AT91_SPI ++ bool "SPI driver (legacy) for AT91RM9200 processors" ++ depends on ARCH_AT91RM9200 ++ default y ++ help ++ The SPI driver gives access to this serial bus on the AT91RM9200 ++ processor. ++ ++config AT91_SPIDEV ++ bool "SPI device interface (legacy) for AT91RM9200 processors" ++ depends on ARCH_AT91RM9200 && AT91_SPI ++ default n ++ help ++ The SPI driver gives user mode access to this serial ++ bus on the AT91RM9200 processor. ++ + endmenu + +diff -urN -x CVS linux-2.6.21/drivers/char/Makefile linux-2.6-stable/drivers/char/Makefile +--- linux-2.6.21/drivers/char/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/char/Makefile Tue May 8 14:31:24 2007 +@@ -93,6 +93,8 @@ + obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o + obj-$(CONFIG_TANBAC_TB0219) += tb0219.o + obj-$(CONFIG_TELCLOCK) += tlclk.o ++obj-$(CONFIG_AT91_SPI) += at91_spi.o ++obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o + + obj-$(CONFIG_WATCHDOG) += watchdog/ + obj-$(CONFIG_MWAVE) += mwave/ +diff -urN -x CVS linux-2.6.21/drivers/char/at91_spi.c linux-2.6-stable/drivers/char/at91_spi.c +--- linux-2.6.21/drivers/char/at91_spi.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/char/at91_spi.c Tue May 8 14:31:24 2007 +@@ -0,0 +1,336 @@ ++/* ++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder) ++ * ++ * Copyright (C) SAN People (Pty) Ltd ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include <linux/init.h> ++#include <linux/dma-mapping.h> ++#include <linux/module.h> ++#include <linux/sched.h> ++#include <linux/completion.h> ++#include <linux/interrupt.h> ++#include <linux/clk.h> ++#include <linux/platform_device.h> ++#include <linux/atmel_pdc.h> ++#include <asm/io.h> ++#include <asm/semaphore.h> ++ ++#include <asm/arch/at91_spi.h> ++#include <asm/arch/board.h> ++#include <asm/arch/spi.h> ++ ++#undef DEBUG_SPI ++ ++static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */ ++static int spi_enabled = 0; ++static struct semaphore spi_lock; /* protect access to SPI bus */ ++static int current_device = -1; /* currently selected SPI device */ ++static struct clk *spi_clk; /* SPI clock */ ++static void __iomem *spi_base; /* SPI peripheral base-address */ ++ ++DECLARE_COMPLETION(transfer_complete); ++ ++ ++#define at91_spi_read(reg) __raw_readl(spi_base + (reg)) ++#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg)) ++ ++ ++/* ......................................................................... */ ++ ++/* ++ * Access and enable the SPI bus. ++ * This MUST be called before any transfers are performed. ++ */ ++void spi_access_bus(short device) ++{ ++ /* Ensure that requested device is valid */ ++ if ((device < 0) || (device >= NR_SPI_DEVICES)) ++ panic("at91_spi: spi_access_bus called with invalid device"); ++ ++ if (spi_enabled == 0) { ++ clk_enable(spi_clk); /* Enable Peripheral clock */ ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */ ++#ifdef DEBUG_SPI ++ printk("SPI on\n"); ++#endif ++ } ++ spi_enabled++; ++ ++ /* Lock the SPI bus */ ++ down(&spi_lock); ++ current_device = device; ++ ++ /* Configure SPI bus for device */ ++ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16)); ++} ++ ++/* ++ * Relinquish control of the SPI bus. ++ */ ++void spi_release_bus(short device) ++{ ++ if (device != current_device) ++ panic("at91_spi: spi_release called with invalid device"); ++ ++ /* Release the SPI bus */ ++ current_device = -1; ++ up(&spi_lock); ++ ++ spi_enabled--; ++ if (spi_enabled == 0) { ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */ ++ clk_disable(spi_clk); /* Disable Peripheral clock */ ++#ifdef DEBUG_SPI ++ printk("SPI off\n"); ++#endif ++ } ++} ++ ++/* ++ * Perform a data transfer over the SPI bus ++ */ ++int spi_transfer(struct spi_transfer_list* list) ++{ ++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device]; ++ int tx_size; ++ ++ if (!list) ++ panic("at91_spi: spi_transfer called with NULL transfer list"); ++ if (current_device == -1) ++ panic("at91_spi: spi_transfer called without acquiring bus"); ++ ++#ifdef DEBUG_SPI ++ printk("SPI transfer start [%i]\n", list->nr_transfers); ++#endif ++ ++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */ ++ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1; ++ ++ /* Store transfer list */ ++ device->xfers = list; ++ list->curr = 0; ++ ++ /* Assume there must be at least one transfer */ ++ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE); ++ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE); ++ ++ /* Program PDC registers */ ++ at91_spi_write(ATMEL_PDC_TPR, device->tx); ++ at91_spi_write(ATMEL_PDC_RPR, device->rx); ++ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size); ++ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size); ++ ++ /* Is there a second transfer? */ ++ if (list->nr_transfers > 1) { ++ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE); ++ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE); ++ ++ /* Program Next PDC registers */ ++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext); ++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext); ++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size); ++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size); ++ } ++ else { ++ device->txnext = 0; ++ device->rxnext = 0; ++ at91_spi_write(ATMEL_PDC_TNCR, 0); ++ at91_spi_write(ATMEL_PDC_RNCR, 0); ++ } ++ ++ // TODO: If we are doing consecutive transfers (at high speed, or ++ // small buffers), then it might be worth modifying the 'Delay between ++ // Consecutive Transfers' in the CSR registers. ++ // This is an issue if we cannot chain the next buffer fast enough ++ // in the interrupt handler. ++ ++ /* Enable transmitter and receiver */ ++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN); ++ ++ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */ ++ wait_for_completion(&transfer_complete); ++ ++#ifdef DEBUG_SPI ++ printk("SPI transfer end\n"); ++#endif ++ ++ return 0; ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Handle interrupts from the SPI controller. ++ */ ++static irqreturn_t at91spi_interrupt(int irq, void *dev_id) ++{ ++ unsigned int status; ++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device]; ++ struct spi_transfer_list *list = device->xfers; ++ ++#ifdef DEBUG_SPI ++ printk("SPI interrupt %i\n", current_device); ++#endif ++ ++ if (!list) ++ panic("at91_spi: spi_interrupt with a NULL transfer list"); ++ ++ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */ ++ ++ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE); ++ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE); ++ ++ device->tx = device->txnext; /* move next transfer to current transfer */ ++ device->rx = device->rxnext; ++ ++ list->curr = list->curr + 1; ++ if (list->curr == list->nr_transfers) { /* all transfers complete */ ++ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */ ++ ++ /* Disable transmitter and receiver */ ++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); ++ ++ device->xfers = NULL; ++ complete(&transfer_complete); ++ } ++ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */ ++ device->txnext = 0; ++ device->rxnext = 0; ++ at91_spi_write(ATMEL_PDC_TNCR, 0); ++ at91_spi_write(ATMEL_PDC_RNCR, 0); ++ } ++ else { ++ int i = (list->curr)+1; ++ ++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */ ++ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1; ++ ++ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE); ++ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE); ++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext); ++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext); ++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size); ++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size); ++ } ++ return IRQ_HANDLED; ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Initialize the SPI controller ++ */ ++static int __init at91spi_probe(struct platform_device *pdev) ++{ ++ int i; ++ unsigned long scbr; ++ struct resource *res; ++ ++ init_MUTEX(&spi_lock); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) ++ return -ENXIO; ++ ++ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi")) ++ return -EBUSY; ++ ++ spi_base = ioremap(res->start, res->end - res->start + 1); ++ if (!spi_base) { ++ release_mem_region(res->start, res->end - res->start + 1); ++ return -ENOMEM; ++ } ++ ++ spi_clk = clk_get(NULL, "spi_clk"); ++ if (IS_ERR(spi_clk)) { ++ printk(KERN_ERR "at91_spi: no clock defined\n"); ++ iounmap(spi_base); ++ release_mem_region(res->start, res->end - res->start + 1); ++ return -ENODEV; ++ } ++ ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */ ++ ++ /* ++ * Calculate the correct SPI baud-rate divisor. ++ */ ++ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK); ++ scbr = scbr + 1; /* round up */ ++ ++ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr)); ++ ++ /* Set Chip Select registers to good defaults */ ++ for (i = 0; i < 4; i++) { ++ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8)); ++ } ++ ++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); ++ ++ memset(&spi_dev, 0, sizeof(spi_dev)); ++ spi_dev[0].pcs = 0xE; ++ spi_dev[1].pcs = 0xD; ++ spi_dev[2].pcs = 0xB; ++ spi_dev[3].pcs = 0x7; ++ ++ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) { ++ clk_put(spi_clk); ++ iounmap(spi_base); ++ release_mem_region(res->start, res->end - res->start + 1); ++ return -EBUSY; ++ } ++ ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */ ++ ++ return 0; ++} ++ ++static int __devexit at91spi_remove(struct platform_device *pdev) ++{ ++ struct resource *res; ++ ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */ ++ clk_put(spi_clk); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ iounmap(spi_base); ++ release_mem_region(res->start, res->end - res->start + 1); ++ ++ free_irq(AT91RM9200_ID_SPI, 0); ++ return 0; ++} ++ ++static struct platform_driver at91spi_driver = { ++ .probe = at91spi_probe, ++ .remove = __devexit_p(at91spi_remove), ++ .driver = { ++ .name = "at91_spi", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init at91spi_init(void) ++{ ++ return platform_driver_register(&at91spi_driver); ++} ++ ++static void __exit at91spi_exit(void) ++{ ++ platform_driver_unregister(&at91spi_driver); ++} ++ ++EXPORT_SYMBOL(spi_access_bus); ++EXPORT_SYMBOL(spi_release_bus); ++EXPORT_SYMBOL(spi_transfer); ++ ++module_init(at91spi_init); ++module_exit(at91spi_exit); ++ ++MODULE_LICENSE("GPL") ++MODULE_AUTHOR("Andrew Victor") ++MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200") +diff -urN -x CVS linux-2.6.21/drivers/char/at91_spidev.c linux-2.6-stable/drivers/char/at91_spidev.c +--- linux-2.6.21/drivers/char/at91_spidev.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/char/at91_spidev.c Tue May 8 14:31:24 2007 +@@ -0,0 +1,236 @@ ++/* ++ * User-space interface to the SPI bus on Atmel AT91RM9200 ++ * ++ * Copyright (C) 2003 SAN People (Pty) Ltd ++ * ++ * Based on SPI driver by Rick Bronson ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/highmem.h> ++#include <linux/pagemap.h> ++#include <asm/arch/spi.h> ++ ++#ifdef CONFIG_DEVFS_FS ++#include <linux/devfs_fs_kernel.h> ++#endif ++ ++ ++#undef DEBUG_SPIDEV ++ ++/* ......................................................................... */ ++ ++/* ++ * Read or Write to SPI bus. ++ */ ++static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset) ++{ ++ unsigned int spi_device = (unsigned int) file->private_data; ++ ++ struct mm_struct * mm; ++ struct page ** maplist; ++ struct spi_transfer_list* list; ++ int pgcount; ++ ++ unsigned int ofs, pagelen; ++ int res, i, err; ++ ++ if (!count) { ++ return 0; ++ } ++ ++ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL); ++ if (!list) { ++ return -ENOMEM; ++ } ++ ++ mm = current->mm; ++ ++ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE; ++ ++ if (pgcount >= MAX_SPI_TRANSFERS) { ++ kfree(list); ++ return -EFBIG; ++ } ++ ++ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL); ++ ++ if (!maplist) { ++ kfree(list); ++ return -ENOMEM; ++ } ++ flush_cache_all(); ++ down_read(&mm->mmap_sem); ++ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL); ++ up_read(&mm->mmap_sem); ++ ++ if (err < 0) { ++ kfree(list); ++ kfree(maplist); ++ return err; ++ } ++ pgcount = err; ++ ++#ifdef DEBUG_SPIDEV ++ printk("spidev_rd_rw: %i %i\n", count, pgcount); ++#endif ++ ++ /* Set default return value = transfer length */ ++ res = count; ++ ++ /* ++ * At this point, the virtual area buf[0] .. buf[count-1] will have ++ * corresponding pages mapped in the physical memory and locked until ++ * we unmap the kiobuf. The pages cannot be swapped out or moved ++ * around. ++ */ ++ ofs = (unsigned long) buf & (PAGE_SIZE -1); ++ pagelen = PAGE_SIZE - ofs; ++ if (count < pagelen) ++ pagelen = count; ++ ++ for (i = 0; i < pgcount; i++) { ++ flush_dcache_page(maplist[i]); ++ ++ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs; ++ list->txlen[i] = list->rxlen[i] = pagelen; ++ ++#ifdef DEBUG_SPIDEV ++ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]); ++#endif ++ ++ ofs = 0; /* all subsequent transfers start at beginning of a page */ ++ count = count - pagelen; ++ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE; ++ } ++ list->nr_transfers = pgcount; ++ ++ /* Perform transfer on SPI bus */ ++ spi_access_bus(spi_device); ++ spi_transfer(list); ++ spi_release_bus(spi_device); ++ ++ while (pgcount--) { ++ page_cache_release (maplist[pgcount]); ++ } ++ flush_cache_all(); ++ ++ kfree(maplist); ++ kfree(list); ++ ++ return res; ++} ++ ++static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int spi_device = MINOR(inode->i_rdev); ++ ++ if (spi_device >= NR_SPI_DEVICES) ++ return -ENODEV; ++ ++ // TODO: This interface can be used to configure the SPI bus. ++ // Configurable options could include: Speed, Clock Polarity, Clock Phase ++ ++ switch(cmd) { ++ default: ++ return -ENOIOCTLCMD; ++ } ++} ++ ++/* ++ * Open the SPI device ++ */ ++static int spidev_open(struct inode *inode, struct file *file) ++{ ++ unsigned int spi_device = MINOR(inode->i_rdev); ++ ++ if (spi_device >= NR_SPI_DEVICES) ++ return -ENODEV; ++ ++ /* ++ * 'private_data' is actually a pointer, but we overload it with the ++ * value we want to store. ++ */ ++ file->private_data = (void *)spi_device; ++ ++ return 0; ++} ++ ++/* ++ * Close the SPI device ++ */ ++static int spidev_close(struct inode *inode, struct file *file) ++{ ++ return 0; ++} ++ ++/* ......................................................................... */ ++ ++static struct file_operations spidev_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .read = spidev_rd_wr, ++ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr, ++ .ioctl = spidev_ioctl, ++ .open = spidev_open, ++ .release = spidev_close, ++}; ++ ++/* ++ * Install the SPI /dev interface driver ++ */ ++static int __init at91_spidev_init(void) ++{ ++#ifdef CONFIG_DEVFS_FS ++ int i; ++#endif ++ ++ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) { ++ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR); ++ return -EIO; ++ } ++ ++#ifdef CONFIG_DEVFS_FS ++ devfs_mk_dir("spi"); ++ for (i = 0; i < NR_SPI_DEVICES; i++) { ++ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i); ++ } ++#endif ++ printk(KERN_INFO "AT91 SPI driver loaded\n"); ++ ++ return 0; ++} ++ ++/* ++ * Remove the SPI /dev interface driver ++ */ ++static void __exit at91_spidev_exit(void) ++{ ++#ifdef CONFIG_DEVFS_FS ++ int i; ++ for (i = 0; i < NR_SPI_DEVICES; i++) { ++ devfs_remove("spi/%d", i); ++ } ++ ++ devfs_remove("spi"); ++#endif ++ ++ if (unregister_chrdev(SPI_MAJOR, "spi")) { ++ printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR); ++ return; ++ } ++} ++ ++module_init(at91_spidev_init); ++module_exit(at91_spidev_exit); ++ ++MODULE_LICENSE("GPL") ++MODULE_AUTHOR("Andrew Victor") ++MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200") +diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/Kconfig linux-2.6-stable/drivers/i2c/busses/Kconfig +--- linux-2.6.21/drivers/i2c/busses/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/i2c/busses/Kconfig Tue May 8 12:13:31 2007 +@@ -81,6 +81,14 @@ + This supports the use of the I2C interface on Atmel AT91 + processors. + ++config I2C_AT91_CLOCKRATE ++ prompt "Atmel AT91 I2C/TWI clock-rate" ++ depends on I2C_AT91 ++ int ++ default 100000 ++ help ++ Set the AT91 I2C/TWI clock-rate. ++ + config I2C_AU1550 + tristate "Au1550/Au1200 SMBus interface" + depends on I2C && (SOC_AU1550 || SOC_AU1200) +@@ -545,6 +553,14 @@ + This driver can also be built as a module. If so, the module + will be called i2c-voodoo3. + ++config I2C_PCA ++ tristate "PCA9564" ++ depends on I2C ++ select I2C_ALGOPCA ++ help ++ This driver support the Philips PCA 9564 Parallel bus to I2C ++ bus controller. ++ + config I2C_PCA_ISA + tristate "PCA9564 on an ISA bus" + depends on I2C +diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/Makefile linux-2.6-stable/drivers/i2c/busses/Makefile +--- linux-2.6.21/drivers/i2c/busses/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/i2c/busses/Makefile Tue May 8 12:13:31 2007 +@@ -28,6 +28,7 @@ + obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o + obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o + obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o ++obj-$(CONFIG_I2C_PCA) += i2c-pca.o + obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o + obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o + obj-$(CONFIG_I2C_PNX) += i2c-pnx.o +diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/i2c-at91.c linux-2.6-stable/drivers/i2c/busses/i2c-at91.c +--- linux-2.6.21/drivers/i2c/busses/i2c-at91.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/i2c/busses/i2c-at91.c Tue May 8 12:13:31 2007 +@@ -31,8 +31,11 @@ + #include <asm/arch/board.h> + #include <asm/arch/cpu.h> + +-#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ + ++/* Clockrate is configurable - max 400 Kbits/sec */ ++static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE; ++module_param(clockrate, uint, 0); ++MODULE_PARM_DESC(clockrate, "The TWI clockrate"); + + static struct clk *twi_clk; + static void __iomem *twi_base; +@@ -53,7 +56,7 @@ + at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ + + /* Calcuate clock dividers */ +- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3; ++ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3; + cdiv = cdiv + 1; /* round up */ + ckdiv = 0; + while (cdiv > 255) { +@@ -61,11 +64,12 @@ + cdiv = cdiv >> 1; + } + +- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */ +- if (ckdiv > 5) { +- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n"); +- ckdiv = 5; +- } ++ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */ ++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n"); ++ ckdiv = 5; ++ } else if (ckdiv > 7) { ++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n"); ++ ckdiv = 7; + } + + at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); +diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/i2c-pca.c linux-2.6-stable/drivers/i2c/busses/i2c-pca.c +--- linux-2.6.21/drivers/i2c/busses/i2c-pca.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/i2c/busses/i2c-pca.c Tue May 8 12:13:31 2007 +@@ -0,0 +1,213 @@ ++/* ++ * Platform driver for PCA9564 I2C bus controller. ++ * ++ * (C) 2006 Andrew Victor ++ * ++ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards ++ * Copyright (C) 2004 Arcom Control Systems ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/delay.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/wait.h> ++#include <linux/platform_device.h> ++ ++#include <linux/i2c.h> ++#include <linux/i2c-algo-pca.h> ++ ++#include <asm/io.h> ++ ++#include "../algos/i2c-algo-pca.h" ++ ++#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */ ++#define PCA_CLOCK I2C_PCA_CON_59kHz ++ ++//#define REG_SHIFT 2 ++#define REG_SHIFT 0 ++ ++//#define DEBUG_IO ++ ++#define PCA_IO_SIZE 4 ++ ++static void __iomem *base_addr; ++static int irq; ++static wait_queue_head_t pca_wait; ++ ++static int pca_getown(struct i2c_algo_pca_data *adap) ++{ ++ return PCA_OWN_ADDRESS; ++} ++ ++static int pca_getclock(struct i2c_algo_pca_data *adap) ++{ ++ return PCA_CLOCK; ++} ++ ++static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val) ++{ ++#ifdef DEBUG_IO ++ static char *names[] = { "T/O", "DAT", "ADR", "CON" }; ++ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val); ++#endif ++ udelay(1); ++ outb(val, base_addr + (reg << REG_SHIFT)); ++} ++ ++static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg) ++{ ++ int res; ++ ++ udelay(1); ++ res = inb(base_addr + (reg << REG_SHIFT)); ++#ifdef DEBUG_IO ++ { ++ static char *names[] = { "STA", "DAT", "ADR", "CON" }; ++ printk("*** read %s => %#04x\n", names[reg], res); ++ } ++#endif ++ return res; ++} ++ ++static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap) ++{ ++ int ret = 0; ++ ++ if (irq > -1) { ++ ret = wait_event_interruptible(pca_wait, ++ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI); ++ } else { ++ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) ++ udelay(100); ++ } ++ return ret; ++} ++ ++static irqreturn_t pca_handler(int this_irq, void *dev_id) ++{ ++ wake_up_interruptible(&pca_wait); ++ return IRQ_HANDLED; ++} ++ ++static struct i2c_algo_pca_data pca_i2c_data = { ++ .get_own = pca_getown, ++ .get_clock = pca_getclock, ++ .write_byte = pca_writebyte, ++ .read_byte = pca_readbyte, ++ .wait_for_interrupt = pca_waitforinterrupt, ++}; ++ ++static struct i2c_adapter pca_i2c_ops = { ++ .owner = THIS_MODULE, ++ .id = I2C_HW_A_PLAT, ++ .algo_data = &pca_i2c_data, ++ .name = "PCA9564", ++ .class = I2C_CLASS_HWMON, ++}; ++ ++static int __devinit pca_i2c_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ ++ init_waitqueue_head(&pca_wait); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) ++ return -ENODEV; ++ ++ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564")) ++ return -ENXIO; ++ ++ base_addr = ioremap(res->start, PCA_IO_SIZE); ++ if (base_addr == NULL) ++ goto out_region; ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq > -1) { ++ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) { ++ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq); ++ goto out_remap; ++ } ++ } ++ ++ /* set up the driverfs linkage to our parent device */ ++ pca_i2c_ops.dev.parent = &pdev->dev; ++ ++ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) { ++ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n"); ++ goto out_irq; ++ } ++ ++ return 0; ++ ++ out_irq: ++ if (irq > -1) ++ free_irq(irq, &pca_i2c_ops); ++ ++ out_remap: ++ iounmap(base_addr); ++ ++ out_region: ++ release_mem_region(res->start, PCA_IO_SIZE); ++ return -ENODEV; ++} ++ ++static int __devexit pca_i2c_remove(struct platform_device *pdev) ++{ ++ struct resource *res; ++ ++ i2c_del_adapter(&pca_i2c_ops); ++ ++ if (irq > 0) ++ free_irq(irq, NULL); ++ ++ iounmap(base_addr); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ release_mem_region(res->start, PCA_IO_SIZE); ++ ++ return 0; ++} ++ ++static struct platform_driver pca_i2c_driver = { ++ .probe = pca_i2c_probe, ++ .remove = __devexit_p(pca_i2c_remove), ++ .driver = { ++ .name = "pca9564", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init pca_i2c_init(void) ++{ ++ return platform_driver_register(&pca_i2c_driver); ++} ++ ++static void __exit pca_i2c_exit(void) ++{ ++ platform_driver_unregister(&pca_i2c_driver); ++} ++ ++module_init(pca_i2c_init); ++module_exit(pca_i2c_exit); ++ ++MODULE_AUTHOR("Andrew Victor"); ++MODULE_DESCRIPTION("PCA9564 platform driver"); ++MODULE_LICENSE("GPL"); +diff -urN -x CVS linux-2.6.21/drivers/input/touchscreen/ads7846.c linux-2.6-stable/drivers/input/touchscreen/ads7846.c +--- linux-2.6.21/drivers/input/touchscreen/ads7846.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/input/touchscreen/ads7846.c Tue May 8 12:56:33 2007 +@@ -39,7 +39,8 @@ + /* + * This code has been heavily tested on a Nokia 770, and lightly + * tested on other ads7846 devices (OSK/Mistral, Lubbock). +- * Support for ads7843 and ads7845 has only been stubbed in. ++ * Support for ads7843 tested on Atmel at91sam926x-EK. ++ * Support for ads7845 has only been stubbed in. + * + * IRQ handling needs a workaround because of a shortcoming in handling + * edge triggered IRQs on some platforms like the OMAP1/2. These +@@ -246,18 +247,16 @@ + + /* REVISIT: take a few more samples, and compare ... */ + +- /* maybe off internal vREF */ +- if (use_internal) { +- req->ref_off = REF_OFF; +- req->xfer[4].tx_buf = &req->ref_off; +- req->xfer[4].len = 1; +- spi_message_add_tail(&req->xfer[4], &req->msg); +- +- req->xfer[5].rx_buf = &req->scratch; +- req->xfer[5].len = 2; +- CS_CHANGE(req->xfer[5]); +- spi_message_add_tail(&req->xfer[5], &req->msg); +- } ++ /* converter in low power mode & enable PENIRQ */ ++ req->ref_off = PWRDOWN; ++ req->xfer[4].tx_buf = &req->ref_off; ++ req->xfer[4].len = 1; ++ spi_message_add_tail(&req->xfer[4], &req->msg); ++ ++ req->xfer[5].rx_buf = &req->scratch; ++ req->xfer[5].len = 2; ++ CS_CHANGE(req->xfer[5]); ++ spi_message_add_tail(&req->xfer[5], &req->msg); + + ts->irq_disabled = 1; + disable_irq(spi->irq); +@@ -536,6 +535,9 @@ + } else + Rt = 0; + ++ if (ts->model == 7843) ++ Rt = ts->pressure_max / 2; ++ + /* Sample found inconsistent by debouncing or pressure is beyond + * the maximum. Don't report it to user space, repeat at least + * once more the measurement +diff -urN -x CVS linux-2.6.21/drivers/leds/Kconfig linux-2.6-stable/drivers/leds/Kconfig +--- linux-2.6.21/drivers/leds/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/leds/Kconfig Tue May 8 12:13:31 2007 +@@ -76,6 +76,13 @@ + This option enables support for the Soekris net4801 and net4826 error + LED. + ++config LEDS_AT91 ++ tristate "LED support using AT91 GPIOs" ++ depends on LEDS_CLASS && ARCH_AT91 && !LEDS ++ help ++ This option enables support for LEDs connected to GPIO lines ++ on AT91-based boards. ++ + config LEDS_WRAP + tristate "LED Support for the WRAP series LEDs" + depends on LEDS_CLASS && SCx200_GPIO +diff -urN -x CVS linux-2.6.21/drivers/leds/Makefile linux-2.6-stable/drivers/leds/Makefile +--- linux-2.6.21/drivers/leds/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/leds/Makefile Tue May 8 12:13:31 2007 +@@ -16,6 +16,7 @@ + obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o + obj-$(CONFIG_LEDS_H1940) += leds-h1940.o + obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o ++obj-$(CONFIG_LEDS_AT91) += leds-at91.o + + # LED Triggers + obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o +diff -urN -x CVS linux-2.6.21/drivers/leds/leds-at91.c linux-2.6-stable/drivers/leds/leds-at91.c +--- linux-2.6.21/drivers/leds/leds-at91.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/leds/leds-at91.c Tue May 8 12:13:31 2007 +@@ -0,0 +1,140 @@ ++/* ++ * AT91 GPIO based LED driver ++ * ++ * Copyright (C) 2006 David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/leds.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++static LIST_HEAD(at91_led_list); /* list of AT91 LEDs */ ++ ++struct at91_led { ++ struct led_classdev cdev; ++ struct list_head list; ++ struct at91_gpio_led *led_data; ++}; ++ ++/* ++ * Change the state of the LED. ++ */ ++static void at91_led_set(struct led_classdev *cdev, enum led_brightness value) ++{ ++ struct at91_led *led = container_of(cdev, struct at91_led, cdev); ++ short active = (value == LED_OFF); ++ ++ if (led->led_data->flags & 1) /* active high/low? */ ++ active = !active; ++ at91_set_gpio_value(led->led_data->gpio, active); ++} ++ ++static int __devexit at91_led_remove(struct platform_device *pdev) ++{ ++ struct at91_led *led; ++ ++ list_for_each_entry (led, &at91_led_list, list) ++ led_classdev_unregister(&led->cdev); ++ ++#warning "Free allocated memory" ++ // TODO: Free memory. kfree(led); ++ ++ return 0; ++} ++ ++static int __init at91_led_probe(struct platform_device *pdev) ++{ ++ int status = 0; ++ struct at91_gpio_led *pdata = pdev->dev.platform_data; ++ unsigned nr_leds; ++ struct at91_led *led; ++ ++ if (!pdata) ++ return -ENODEV; ++ ++ nr_leds = pdata->index; /* first index stores number of LEDs */ ++ ++ while (nr_leds--) { ++ led = kzalloc(sizeof(struct at91_led), GFP_KERNEL); ++ if (!led) { ++ dev_err(&pdev->dev, "No memory for device\n"); ++ status = -ENOMEM; ++ goto cleanup; ++ } ++ led->led_data = pdata; ++ led->cdev.name = pdata->name; ++ led->cdev.brightness_set = at91_led_set, ++ led->cdev.default_trigger = pdata->trigger; ++ ++ status = led_classdev_register(&pdev->dev, &led->cdev); ++ if (status < 0) { ++ dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status); ++cleanup: ++ at91_led_remove(pdev); ++ break; ++ } ++ list_add(&led->list, &at91_led_list); ++ pdata++; ++ } ++ return status; ++} ++ ++#ifdef CONFIG_PM ++static int at91_led_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct at91_led *led; ++ ++ list_for_each_entry (led, &at91_led_list, list) ++ led_classdev_suspend(&led->cdev); ++ ++ return 0; ++} ++ ++static int at91_led_resume(struct platform_device *dev) ++{ ++ struct at91_led *led; ++ ++ list_for_each_entry (led, &at91_led_list, list) ++ led_classdev_resume(&led->cdev); ++ ++ return 0; ++} ++#else ++#define at91_led_suspend NULL ++#define at91_led_resume NULL ++#endif ++ ++static struct platform_driver at91_led_driver = { ++ .probe = at91_led_probe, ++ .remove = __devexit_p(at91_led_remove), ++ .suspend = at91_led_suspend, ++ .resume = at91_led_resume, ++ .driver = { ++ .name = "at91_leds", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init at91_led_init(void) ++{ ++ return platform_driver_register(&at91_led_driver); ++} ++module_init(at91_led_init); ++ ++static void __exit at91_led_exit(void) ++{ ++ platform_driver_unregister(&at91_led_driver); ++} ++module_exit(at91_led_exit); ++ ++MODULE_DESCRIPTION("AT91 GPIO LED driver"); ++MODULE_AUTHOR("David Brownell"); ++MODULE_LICENSE("GPL"); +diff -urN -x CVS linux-2.6.21/drivers/mmc/at91_mci.c linux-2.6-stable/drivers/mmc/at91_mci.c +--- linux-2.6.21/drivers/mmc/at91_mci.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/mmc/at91_mci.c Fri May 11 17:13:13 2007 +@@ -86,7 +86,7 @@ + + #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \ + | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \ +- | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE) ++ | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE) + + #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg)) + #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg)) +@@ -561,9 +561,7 @@ + pr_debug("Status = %08X [%08X %08X %08X %08X]\n", + status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); + +- if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE | +- AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE | +- AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) { ++ if (status & AT91_MCI_ERRORS) { + if ((status & AT91_MCI_RCRCE) && + ((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) { + cmd->error = MMC_ERR_NONE; +@@ -665,15 +663,15 @@ + + int_status = at91_mci_read(host, AT91_MCI_SR); + int_mask = at91_mci_read(host, AT91_MCI_IMR); +- ++ + pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask, + int_status & int_mask); +- ++ + int_status = int_status & int_mask; + + if (int_status & AT91_MCI_ERRORS) { + completed = 1; +- ++ + if (int_status & AT91_MCI_UNRE) + pr_debug("MMC: Underrun error\n"); + if (int_status & AT91_MCI_OVRE) +@@ -821,7 +819,7 @@ + mmc->f_min = 375000; + mmc->f_max = 25000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; +- mmc->caps = MMC_CAP_BYTEBLOCK; ++ mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE; + + mmc->max_blk_size = 4095; + mmc->max_blk_count = mmc->max_req_size; +@@ -895,6 +893,8 @@ + + mmc_add_host(mmc); + ++ device_init_wakeup(&pdev->dev, 1); ++ + /* + * monitor card insertion/removal if we can + */ +@@ -924,6 +924,8 @@ + + host = mmc_priv(mmc); + ++ device_init_wakeup(&pdev->dev, 0); ++ + if (host->present != -1) { + free_irq(host->board->det_pin, host); + cancel_delayed_work(&host->mmc->detect); +@@ -951,8 +953,12 @@ + static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state) + { + struct mmc_host *mmc = platform_get_drvdata(pdev); ++ struct at91mci_host *host = mmc_priv(mmc); + int ret = 0; + ++ if (device_may_wakeup(&pdev->dev)) ++ enable_irq_wake(host->board->det_pin); ++ + if (mmc) + ret = mmc_suspend_host(mmc, state); + +@@ -962,8 +968,12 @@ + static int at91_mci_resume(struct platform_device *pdev) + { + struct mmc_host *mmc = platform_get_drvdata(pdev); ++ struct at91mci_host *host = mmc_priv(mmc); + int ret = 0; + ++ if (device_may_wakeup(&pdev->dev)) ++ disable_irq_wake(host->board->det_pin); ++ + if (mmc) + ret = mmc_resume_host(mmc); + +diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/Kconfig linux-2.6-stable/drivers/mtd/devices/Kconfig +--- linux-2.6.21/drivers/mtd/devices/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/mtd/devices/Kconfig Tue May 8 14:31:24 2007 +@@ -267,5 +267,11 @@ + LinuxBIOS or if you need to recover a DiskOnChip Millennium on which + you have managed to wipe the first block. + +-endmenu ++config MTD_AT91_DATAFLASH ++ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)" ++ depends on MTD && ARCH_AT91RM9200 && AT91_SPI ++ help ++ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200. ++ If you have such a board, say 'Y'. + ++endmenu +diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/Makefile linux-2.6-stable/drivers/mtd/devices/Makefile +--- linux-2.6.21/drivers/mtd/devices/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/mtd/devices/Makefile Tue May 8 14:31:24 2007 +@@ -17,3 +17,4 @@ + obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o + obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o + obj-$(CONFIG_MTD_M25P80) += m25p80.o ++obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o +diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/at91_dataflash.c linux-2.6-stable/drivers/mtd/devices/at91_dataflash.c +--- linux-2.6.21/drivers/mtd/devices/at91_dataflash.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/mtd/devices/at91_dataflash.c Tue May 8 14:31:24 2007 +@@ -0,0 +1,667 @@ ++/* ++ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder) ++ * ++ * Copyright (C) SAN People (Pty) Ltd ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++*/ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/pci.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++ ++#include <asm/arch/spi.h> ++ ++#undef DEBUG_DATAFLASH ++ ++#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */ ++#undef DATAFLASH_ALWAYS_ADD_DEVICE /* always add whole device when using partitions? */ ++ ++#define OP_READ_CONTINUOUS 0xE8 ++#define OP_READ_PAGE 0xD2 ++#define OP_READ_BUFFER1 0xD4 ++#define OP_READ_BUFFER2 0xD6 ++#define OP_READ_STATUS 0xD7 ++ ++#define OP_ERASE_PAGE 0x81 ++#define OP_ERASE_BLOCK 0x50 ++ ++#define OP_TRANSFER_BUF1 0x53 ++#define OP_TRANSFER_BUF2 0x55 ++#define OP_COMPARE_BUF1 0x60 ++#define OP_COMPARE_BUF2 0x61 ++ ++#define OP_PROGRAM_VIA_BUF1 0x82 ++#define OP_PROGRAM_VIA_BUF2 0x85 ++ ++struct dataflash_local ++{ ++ int spi; /* SPI chip-select number */ ++ ++ unsigned int page_size; /* number of bytes per page */ ++ unsigned short page_offset; /* page offset in flash address */ ++}; ++ ++ ++/* Detected DataFlash devices */ ++static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES]; ++static int nr_devices = 0; ++ ++/* ......................................................................... */ ++ ++#ifdef CONFIG_MTD_PARTITIONS ++ ++static struct mtd_partition static_partitions_2M[] = ++{ ++ { ++ .name = "bootloader", ++ .offset = 0, ++ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */ ++ .mask_flags = MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 6 * 32 * 8 * 528, /* 6 sectors */ ++ }, ++ { ++ .name = "filesystem", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */ ++ } ++}; ++ ++static struct mtd_partition static_partitions_4M[] = ++{ ++ { ++ .name = "bootloader", ++ .offset = 0, ++ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */ ++ .mask_flags = MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 4 * 64 * 8 * 528, /* 4 sectors */ ++ }, ++ { ++ .name = "filesystem", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */ ++ } ++}; ++ ++#if defined(CONFIG_MACH_KAFA) ++static struct mtd_partition static_partitions_8M[] = ++{ ++ { ++ name: "romboot", ++ offset: 0, ++ size: 16 * 1056, /* 160 Kb */ ++ mask_flags: MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ name: "uboot", ++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ ++ size: 128 * 1056, /* 1 MB */ ++ }, ++ { ++ name: "kernel", ++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ ++ size: 1024 * 1056, /* 1 MB */ ++ }, ++ { ++ name: "filesystem", ++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ ++ size: MTDPART_SIZ_FULL, ++ } ++}; ++ ++#elif defined(CONFIG_MACH_MULTMDP) ++ ++static struct mtd_partition static_partitions_8M[] = ++{ ++ { ++ .name = "bootloader", ++ .offset = 0, ++ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */ ++ .mask_flags = MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ .name = "configuration", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 20 * 1056, ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 1520 * 1056, ++ }, ++ { ++ .name = "filesystem", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, ++ } ++}; ++ ++#else ++ ++static struct mtd_partition static_partitions_8M[] = ++{ ++ { ++ .name = "bootloader", ++ .offset = 0, ++ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */ ++ .mask_flags = MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 5 * 32 * 8 * 1056, /* 5 sectors */ ++ }, ++ { ++ .name = "filesystem", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */ ++ } ++}; ++#endif ++ ++static const char *part_probes[] = { "cmdlinepart", NULL, }; ++ ++#endif ++ ++/* ......................................................................... */ ++ ++/* Allocate a single SPI transfer descriptor. We're assuming that if multiple ++ SPI transfers occur at the same time, spi_access_bus() will serialize them. ++ If this is not valid, then either (i) each dataflash 'priv' structure ++ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use ++ another mechanism. */ ++static struct spi_transfer_list* spi_transfer_desc; ++ ++/* ++ * Perform a SPI transfer to access the DataFlash device. ++ */ ++static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len, ++ char* txnext, int txnext_len, char* rxnext, int rxnext_len) ++{ ++ struct spi_transfer_list* list = spi_transfer_desc; ++ ++ list->tx[0] = tx; list->txlen[0] = tx_len; ++ list->rx[0] = rx; list->rxlen[0] = rx_len; ++ ++ list->tx[1] = txnext; list->txlen[1] = txnext_len; ++ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len; ++ ++ list->nr_transfers = nr; ++ ++ return spi_transfer(list); ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Poll the DataFlash device until it is READY. ++ */ ++static void at91_dataflash_waitready(void) ++{ ++ char* command = kmalloc(2, GFP_KERNEL); ++ ++ if (!command) ++ return; ++ ++ do { ++ command[0] = OP_READ_STATUS; ++ command[1] = 0; ++ ++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0); ++ } while ((command[1] & 0x80) == 0); ++ ++ kfree(command); ++} ++ ++/* ++ * Return the status of the DataFlash device. ++ */ ++static unsigned short at91_dataflash_status(void) ++{ ++ unsigned short status; ++ char* command = kmalloc(2, GFP_KERNEL); ++ ++ if (!command) ++ return 0; ++ ++ command[0] = OP_READ_STATUS; ++ command[1] = 0; ++ ++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0); ++ status = command[1]; ++ ++ kfree(command); ++ return status; ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Erase blocks of flash. ++ */ ++static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) ++{ ++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; ++ unsigned int pageaddr; ++ char* command; ++ ++#ifdef DEBUG_DATAFLASH ++ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len); ++#endif ++ ++ /* Sanity checks */ ++ if (instr->addr + instr->len > mtd->size) ++ return -EINVAL; ++ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0)) ++ return -EINVAL; ++ if ((instr->addr % priv->page_size) != 0) ++ return -EINVAL; ++ ++ command = kmalloc(4, GFP_KERNEL); ++ if (!command) ++ return -ENOMEM; ++ ++ while (instr->len > 0) { ++ /* Calculate flash page address */ ++ pageaddr = (instr->addr / priv->page_size) << priv->page_offset; ++ ++ command[0] = OP_ERASE_PAGE; ++ command[1] = (pageaddr & 0x00FF0000) >> 16; ++ command[2] = (pageaddr & 0x0000FF00) >> 8; ++ command[3] = 0; ++#ifdef DEBUG_DATAFLASH ++ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr); ++#endif ++ ++ /* Send command to SPI device */ ++ spi_access_bus(priv->spi); ++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); ++ ++ at91_dataflash_waitready(); /* poll status until ready */ ++ spi_release_bus(priv->spi); ++ ++ instr->addr += priv->page_size; /* next page */ ++ instr->len -= priv->page_size; ++ } ++ ++ kfree(command); ++ ++ /* Inform MTD subsystem that erase is complete */ ++ instr->state = MTD_ERASE_DONE; ++ if (instr->callback) ++ instr->callback(instr); ++ ++ return 0; ++} ++ ++/* ++ * Read from the DataFlash device. ++ * from : Start offset in flash device ++ * len : Amount to read ++ * retlen : About of data actually read ++ * buf : Buffer containing the data ++ */ ++static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) ++{ ++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; ++ unsigned int addr; ++ char* command; ++ ++#ifdef DEBUG_DATAFLASH ++ printk("dataflash_read: %lli .. %lli\n", from, from+len); ++#endif ++ ++ *retlen = 0; ++ ++ /* Sanity checks */ ++ if (!len) ++ return 0; ++ if (from + len > mtd->size) ++ return -EINVAL; ++ ++ /* Calculate flash page/byte address */ ++ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size); ++ ++ command = kmalloc(8, GFP_KERNEL); ++ if (!command) ++ return -ENOMEM; ++ ++ command[0] = OP_READ_CONTINUOUS; ++ command[1] = (addr & 0x00FF0000) >> 16; ++ command[2] = (addr & 0x0000FF00) >> 8; ++ command[3] = (addr & 0x000000FF); ++#ifdef DEBUG_DATAFLASH ++ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); ++#endif ++ ++ /* Send command to SPI device */ ++ spi_access_bus(priv->spi); ++ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len); ++ spi_release_bus(priv->spi); ++ ++ *retlen = len; ++ kfree(command); ++ return 0; ++} ++ ++/* ++ * Write to the DataFlash device. ++ * to : Start offset in flash device ++ * len : Amount to write ++ * retlen : Amount of data actually written ++ * buf : Buffer containing the data ++ */ ++static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) ++{ ++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; ++ unsigned int pageaddr, addr, offset, writelen; ++ size_t remaining; ++ u_char *writebuf; ++ unsigned short status; ++ int res = 0; ++ char* command; ++ char* tmpbuf = NULL; ++ ++#ifdef DEBUG_DATAFLASH ++ printk("dataflash_write: %lli .. %lli\n", to, to+len); ++#endif ++ ++ *retlen = 0; ++ ++ /* Sanity checks */ ++ if (!len) ++ return 0; ++ if (to + len > mtd->size) ++ return -EINVAL; ++ ++ command = kmalloc(4, GFP_KERNEL); ++ if (!command) ++ return -ENOMEM; ++ ++ pageaddr = ((unsigned)to / priv->page_size); ++ offset = ((unsigned)to % priv->page_size); ++ if (offset + len > priv->page_size) ++ writelen = priv->page_size - offset; ++ else ++ writelen = len; ++ writebuf = (u_char *)buf; ++ remaining = len; ++ ++ /* Allocate temporary buffer */ ++ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL); ++ if (!tmpbuf) { ++ kfree(command); ++ return -ENOMEM; ++ } ++ ++ /* Gain access to the SPI bus */ ++ spi_access_bus(priv->spi); ++ ++ while (remaining > 0) { ++#ifdef DEBUG_DATAFLASH ++ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen); ++#endif ++ ++ /* (1) Transfer to Buffer1 */ ++ if (writelen != priv->page_size) { ++ addr = pageaddr << priv->page_offset; ++ command[0] = OP_TRANSFER_BUF1; ++ command[1] = (addr & 0x00FF0000) >> 16; ++ command[2] = (addr & 0x0000FF00) >> 8; ++ command[3] = 0; ++#ifdef DEBUG_DATAFLASH ++ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); ++#endif ++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); ++ at91_dataflash_waitready(); ++ } ++ ++ /* (2) Program via Buffer1 */ ++ addr = (pageaddr << priv->page_offset) + offset; ++ command[0] = OP_PROGRAM_VIA_BUF1; ++ command[1] = (addr & 0x00FF0000) >> 16; ++ command[2] = (addr & 0x0000FF00) >> 8; ++ command[3] = (addr & 0x000000FF); ++#ifdef DEBUG_DATAFLASH ++ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); ++#endif ++ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen); ++ at91_dataflash_waitready(); ++ ++ /* (3) Compare to Buffer1 */ ++ addr = pageaddr << priv->page_offset; ++ command[0] = OP_COMPARE_BUF1; ++ command[1] = (addr & 0x00FF0000) >> 16; ++ command[2] = (addr & 0x0000FF00) >> 8; ++ command[3] = 0; ++#ifdef DEBUG_DATAFLASH ++ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); ++#endif ++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); ++ at91_dataflash_waitready(); ++ ++ /* Get result of the compare operation */ ++ status = at91_dataflash_status(); ++ if ((status & 0x40) == 1) { ++ printk("at91_dataflash: Write error on page %i\n", pageaddr); ++ remaining = 0; ++ res = -EIO; ++ } ++ ++ remaining = remaining - writelen; ++ pageaddr++; ++ offset = 0; ++ writebuf += writelen; ++ *retlen += writelen; ++ ++ if (remaining > priv->page_size) ++ writelen = priv->page_size; ++ else ++ writelen = remaining; ++ } ++ ++ /* Release SPI bus */ ++ spi_release_bus(priv->spi); ++ ++ kfree(tmpbuf); ++ kfree(command); ++ return res; ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Initialize and register DataFlash device with MTD subsystem. ++ */ ++static int __init add_dataflash(int channel, char *name, int IDsize, ++ int nr_pages, int pagesize, int pageoffset) ++{ ++ struct mtd_info *device; ++ struct dataflash_local *priv; ++#ifdef CONFIG_MTD_PARTITIONS ++ struct mtd_partition *mtd_parts = 0; ++ int mtd_parts_nr = 0; ++#endif ++ ++ if (nr_devices >= DATAFLASH_MAX_DEVICES) { ++ printk(KERN_ERR "at91_dataflash: Too many devices detected\n"); ++ return 0; ++ } ++ ++ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL); ++ if (!device) ++ return -ENOMEM; ++ memset(device, 0, sizeof(struct mtd_info)); ++ ++ device->name = (char *)&device[1]; ++ sprintf(device->name, "%s.spi%d", name, channel); ++ device->size = nr_pages * pagesize; ++ device->erasesize = pagesize; ++ device->writesize = pagesize; ++ device->owner = THIS_MODULE; ++ device->type = MTD_DATAFLASH; ++ device->flags = MTD_WRITEABLE; ++ device->erase = at91_dataflash_erase; ++ device->read = at91_dataflash_read; ++ device->write = at91_dataflash_write; ++ ++ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL); ++ if (!priv) { ++ kfree(device); ++ return -ENOMEM; ++ } ++ memset(priv, 0, sizeof(struct dataflash_local)); ++ ++ priv->spi = channel; ++ priv->page_size = pagesize; ++ priv->page_offset = pageoffset; ++ device->priv = priv; ++ ++ mtd_devices[nr_devices] = device; ++ nr_devices++; ++ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size); ++ ++#ifdef CONFIG_MTD_PARTITIONS ++#ifdef CONFIG_MTD_CMDLINE_PARTS ++ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0); ++#endif ++ if (mtd_parts_nr <= 0) { ++ switch (IDsize) { ++ case SZ_2M: ++ mtd_parts = static_partitions_2M; ++ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M); ++ break; ++ case SZ_4M: ++ mtd_parts = static_partitions_4M; ++ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M); ++ break; ++ case SZ_8M: ++ mtd_parts = static_partitions_8M; ++ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M); ++ break; ++ } ++ } ++ ++ if (mtd_parts_nr > 0) { ++#ifdef DATAFLASH_ALWAYS_ADD_DEVICE ++ add_mtd_device(device); ++#endif ++ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr); ++ } ++#endif ++ return add_mtd_device(device); /* add whole device */ ++} ++ ++/* ++ * Detect and initialize DataFlash device connected to specified SPI channel. ++ * ++ * Device Density ID code Nr Pages Page Size Page offset ++ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 ++ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9 ++ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 ++ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 ++ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 ++ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 ++ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11 ++ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 ++ */ ++static int __init at91_dataflash_detect(int channel) ++{ ++ int res = 0; ++ unsigned short status; ++ ++ spi_access_bus(channel); ++ status = at91_dataflash_status(); ++ spi_release_bus(channel); ++ if (status != 0xff) { /* no dataflash device there */ ++ switch (status & 0x3c) { ++ case 0x0c: /* 0 0 1 1 */ ++ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9); ++ break; ++ case 0x14: /* 0 1 0 1 */ ++ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9); ++ break; ++ case 0x1c: /* 0 1 1 1 */ ++ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9); ++ break; ++ case 0x24: /* 1 0 0 1 */ ++ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9); ++ break; ++ case 0x2c: /* 1 0 1 1 */ ++ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10); ++ break; ++ case 0x34: /* 1 1 0 1 */ ++ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10); ++ break; ++ case 0x3c: /* 1 1 1 1 */ ++ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11); ++ break; ++// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands. ++// case 0x10: /* 0 1 0 0 */ ++// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11); ++// break; ++ default: ++ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c); ++ } ++ } ++ ++ return res; ++} ++ ++static int __init at91_dataflash_init(void) ++{ ++ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL); ++ if (!spi_transfer_desc) ++ return -ENOMEM; ++ ++ /* DataFlash (SPI chip select 0) */ ++ at91_dataflash_detect(0); ++ ++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD ++ /* DataFlash card (SPI chip select 3) */ ++ at91_dataflash_detect(3); ++#endif ++ ++ return 0; ++} ++ ++static void __exit at91_dataflash_exit(void) ++{ ++ int i; ++ ++ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) { ++ if (mtd_devices[i]) { ++#ifdef CONFIG_MTD_PARTITIONS ++ del_mtd_partitions(mtd_devices[i]); ++#else ++ del_mtd_device(mtd_devices[i]); ++#endif ++ kfree(mtd_devices[i]->priv); ++ kfree(mtd_devices[i]); ++ } ++ } ++ nr_devices = 0; ++ kfree(spi_transfer_desc); ++} ++ ++ ++module_init(at91_dataflash_init); ++module_exit(at91_dataflash_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Andrew Victor"); ++MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200"); +diff -urN -x CVS linux-2.6.21/drivers/mtd/nand/at91_nand.c linux-2.6-stable/drivers/mtd/nand/at91_nand.c +--- linux-2.6.21/drivers/mtd/nand/at91_nand.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/mtd/nand/at91_nand.c Tue May 8 12:13:31 2007 +@@ -82,6 +82,10 @@ + at91_set_gpio_value(host->board->enable_pin, 1); + } + ++#ifdef CONFIG_MTD_PARTITIONS ++const char *part_probes[] = { "cmdlinepart", NULL }; ++#endif ++ + /* + * Probe for the NAND device. + */ +@@ -151,6 +155,12 @@ + #ifdef CONFIG_MTD_PARTITIONS + if (host->board->partition_info) + partitions = host->board->partition_info(mtd->size, &num_partitions); ++#ifdef CONFIG_MTD_CMDLINE_PARTS ++ else { ++ mtd->name = "at91_nand"; ++ num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0); ++ } ++#endif + + if ((!partitions) || (num_partitions == 0)) { + printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n"); +diff -urN -x CVS linux-2.6.21/drivers/net/arm/at91_ether.c linux-2.6-stable/drivers/net/arm/at91_ether.c +--- linux-2.6.21/drivers/net/arm/at91_ether.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/net/arm/at91_ether.c Tue May 8 12:13:31 2007 +@@ -225,6 +225,16 @@ + if (!(phy & ((1 << 2) | 1))) + goto done; + } ++ else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */ ++ read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy); ++ if (!(phy & ((1 << 2) | 1))) ++ goto done; ++ } ++ else if (lp->phy_type == MII_DP83848_ID) { ++ read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */ ++ if (!(phy & (1 << 7))) ++ goto done; ++ } + + update_linkspeed(dev, 0); + +@@ -280,6 +290,19 @@ + dsintr = (1 << 10) | ( 1 << 8); + write_phy(lp->phy_address, MII_TPISTATUS, dsintr); + } ++ else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */ ++ read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr); ++ dsintr = dsintr | 0x500; /* set bits 8, 10 */ ++ write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr); ++ } ++ else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */ ++ read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr); ++ dsintr = dsintr | 0x3c; /* set bits 2..5 */ ++ write_phy(lp->phy_address, MII_DPMISR_REG, dsintr); ++ read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr); ++ dsintr = dsintr | 0x3; /* set bits 0,1 */ ++ write_phy(lp->phy_address, MII_DPMICR_REG, dsintr); ++ } + + disable_mdi(); + spin_unlock_irq(&lp->lock); +@@ -323,6 +346,19 @@ + dsintr = ~((1 << 10) | (1 << 8)); + write_phy(lp->phy_address, MII_TPISTATUS, dsintr); + } ++ else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */ ++ read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr); ++ dsintr = dsintr & ~0x500; /* clear bits 8, 10 */ ++ write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr); ++ } ++ else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */ ++ read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr); ++ dsintr = dsintr & ~0x3; /* clear bits 0, 1 */ ++ write_phy(lp->phy_address, MII_DPMICR_REG, dsintr); ++ read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr); ++ dsintr = dsintr & ~0x3c; /* clear bits 2..5 */ ++ write_phy(lp->phy_address, MII_DPMISR_REG, dsintr); ++ } + + disable_mdi(); + spin_unlock_irq(&lp->lock); +@@ -535,8 +571,8 @@ + mc_filter[bitnr >> 5] |= 1 << (bitnr & 31); + } + +- at91_emac_write(AT91_EMAC_HSH, mc_filter[0]); +- at91_emac_write(AT91_EMAC_HSL, mc_filter[1]); ++ at91_emac_write(AT91_EMAC_HSL, mc_filter[0]); ++ at91_emac_write(AT91_EMAC_HSH, mc_filter[1]); + } + + /* +@@ -943,14 +979,22 @@ + struct net_device *dev; + struct at91_private *lp; + unsigned int val; +- int res; ++ struct resource *res; ++ int ret; + + dev = alloc_etherdev(sizeof(struct at91_private)); + if (!dev) + return -ENOMEM; + +- dev->base_addr = AT91_VA_BASE_EMAC; +- dev->irq = AT91RM9200_ID_EMAC; ++ /* Get I/O base address and IRQ */ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ free_netdev(dev); ++ return -ENODEV; ++ } ++ dev->base_addr = res->start; ++ dev->irq = platform_get_irq(pdev, 0); ++ + SET_MODULE_OWNER(dev); + + /* Install the interrupt handler */ +@@ -1023,12 +1067,12 @@ + lp->phy_address = phy_address; /* MDI address of PHY */ + + /* Register the network interface */ +- res = register_netdev(dev); +- if (res) { ++ ret = register_netdev(dev); ++ if (ret) { + free_irq(dev->irq, dev); + free_netdev(dev); + dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); +- return res; ++ return ret; + } + + /* Determine current link speed */ +@@ -1063,10 +1107,16 @@ + printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name); + else if (phy_type == MII_DP83847_ID) + printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name); ++ else if (phy_type == MII_DP83848_ID) ++ printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name); + else if (phy_type == MII_AC101L_ID) + printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name); + else if (phy_type == MII_KS8721_ID) + printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name); ++ else if (phy_type == MII_T78Q21x3_ID) ++ printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name); ++ else if (phy_type == MII_LAN83C185_ID) ++ printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name); + + return 0; + } +@@ -1104,8 +1154,11 @@ + case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */ + case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */ + case MII_DP83847_ID: /* National Semiconductor DP83847: */ ++ case MII_DP83848_ID: /* National Semiconductor DP83848: */ + case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */ + case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ ++ case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */ ++ case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */ + detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk); + break; + } +diff -urN -x CVS linux-2.6.21/drivers/net/arm/at91_ether.h linux-2.6-stable/drivers/net/arm/at91_ether.h +--- linux-2.6.21/drivers/net/arm/at91_ether.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/net/arm/at91_ether.h Tue May 8 12:13:31 2007 +@@ -17,39 +17,46 @@ + + + /* Davicom 9161 PHY */ +-#define MII_DM9161_ID 0x0181b880 +-#define MII_DM9161A_ID 0x0181b8a0 +- +-/* Davicom specific registers */ +-#define MII_DSCR_REG 16 +-#define MII_DSCSR_REG 17 +-#define MII_DSINTR_REG 21 ++#define MII_DM9161_ID 0x0181b880 ++#define MII_DM9161A_ID 0x0181b8a0 ++#define MII_DSCR_REG 16 ++#define MII_DSCSR_REG 17 ++#define MII_DSINTR_REG 21 + + /* Intel LXT971A PHY */ +-#define MII_LXT971A_ID 0x001378E0 +- +-/* Intel specific registers */ +-#define MII_ISINTE_REG 18 +-#define MII_ISINTS_REG 19 +-#define MII_LEDCTRL_REG 20 ++#define MII_LXT971A_ID 0x001378E0 ++#define MII_ISINTE_REG 18 ++#define MII_ISINTS_REG 19 ++#define MII_LEDCTRL_REG 20 + + /* Realtek RTL8201 PHY */ +-#define MII_RTL8201_ID 0x00008200 ++#define MII_RTL8201_ID 0x00008200 + + /* Broadcom BCM5221 PHY */ +-#define MII_BCM5221_ID 0x004061e0 +- +-/* Broadcom specific registers */ +-#define MII_BCMINTR_REG 26 ++#define MII_BCM5221_ID 0x004061e0 ++#define MII_BCMINTR_REG 26 + + /* National Semiconductor DP83847 */ +-#define MII_DP83847_ID 0x20005c30 ++#define MII_DP83847_ID 0x20005c30 ++ ++/* National Semiconductor DP83848 */ ++#define MII_DP83848_ID 0x20005c90 ++#define MII_DPPHYSTS_REG 16 ++#define MII_DPMICR_REG 17 ++#define MII_DPMISR_REG 18 + + /* Altima AC101L PHY */ +-#define MII_AC101L_ID 0x00225520 ++#define MII_AC101L_ID 0x00225520 + + /* Micrel KS8721 PHY */ +-#define MII_KS8721_ID 0x00221610 ++#define MII_KS8721_ID 0x00221610 ++ ++/* Teridian 78Q2123/78Q2133 */ ++#define MII_T78Q21x3_ID 0x000e7230 ++#define MII_T78Q21INT_REG 17 ++ ++/* SMSC LAN83C185 */ ++#define MII_LAN83C185_ID 0x0007C0A0 + + /* ........................................................................ */ + +diff -urN -x CVS linux-2.6.21/drivers/pcmcia/at91_cf.c linux-2.6-stable/drivers/pcmcia/at91_cf.c +--- linux-2.6.21/drivers/pcmcia/at91_cf.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/pcmcia/at91_cf.c Tue May 8 12:13:31 2007 +@@ -332,20 +332,27 @@ + struct at91_cf_data *board = cf->board; + + pcmcia_socket_dev_suspend(&pdev->dev, mesg); ++ + if (device_may_wakeup(&pdev->dev)) { + enable_irq_wake(board->det_pin); + if (board->irq_pin) + enable_irq_wake(board->irq_pin); +- } else { +- disable_irq_wake(board->det_pin); +- if (board->irq_pin) +- disable_irq_wake(board->irq_pin); + } ++ + return 0; + } + + static int at91_cf_resume(struct platform_device *pdev) + { ++ struct at91_cf_socket *cf = platform_get_drvdata(pdev); ++ struct at91_cf_data *board = cf->board; ++ ++ if (device_may_wakeup(&pdev->dev)) { ++ disable_irq_wake(board->det_pin); ++ if (board->irq_pin) ++ disable_irq_wake(board->irq_pin); ++ } ++ + pcmcia_socket_dev_resume(&pdev->dev); + return 0; + } +@@ -360,7 +367,6 @@ + .name = (char *) driver_name, + .owner = THIS_MODULE, + }, +- .probe = at91_cf_probe, + .remove = __exit_p(at91_cf_remove), + .suspend = at91_cf_suspend, + .resume = at91_cf_resume, +@@ -370,7 +376,7 @@ + + static int __init at91_cf_init(void) + { +- return platform_driver_register(&at91_cf_driver); ++ return platform_driver_probe(&at91_cf_driver, at91_cf_probe); + } + module_init(at91_cf_init); + +diff -urN -x CVS linux-2.6.21/drivers/serial/atmel_serial.c linux-2.6-stable/drivers/serial/atmel_serial.c +--- linux-2.6.21/drivers/serial/atmel_serial.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/serial/atmel_serial.c Tue May 8 12:13:31 2007 +@@ -7,6 +7,8 @@ + * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * ++ * DMA support added by Chip Coldwell. ++ * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or +@@ -33,6 +35,7 @@ + #include <linux/sysrq.h> + #include <linux/tty_flip.h> + #include <linux/platform_device.h> ++#include <linux/dma-mapping.h> + #include <linux/atmel_pdc.h> + + #include <asm/io.h> +@@ -47,6 +50,11 @@ + + #include "atmel_serial.h" + ++#define SUPPORT_PDC ++#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3) ++#warning "Revisit" ++#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ ++ + #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) + #define SUPPORT_SYSRQ + #endif +@@ -107,6 +115,13 @@ + static int (*atmel_open_hook)(struct uart_port *); + static void (*atmel_close_hook)(struct uart_port *); + ++struct atmel_dma_buffer { ++ unsigned char *buf; ++ dma_addr_t dma_addr; ++ size_t dma_size; ++ unsigned int ofs; ++}; ++ + /* + * We wrap our port structure around the generic uart_port. + */ +@@ -114,10 +129,20 @@ + struct uart_port uart; /* uart */ + struct clk *clk; /* uart clock */ + unsigned short suspended; /* is port suspended? */ ++ ++ short use_dma_rx; /* enable PDC receiver */ ++ short pdc_rx_idx; /* current PDC RX buffer */ ++ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ ++ ++ short use_dma_tx; /* enable PDC transmitter */ ++ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ + }; + + static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; + ++#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx] ++#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx ++ + #ifdef SUPPORT_SYSRQ + static struct console atmel_console; + #endif +@@ -205,7 +230,12 @@ + { + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + +- UART_PUT_IDR(port, ATMEL_US_TXRDY); ++ if (atmel_port->use_dma_tx) { ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ ++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); ++ } ++ else ++ UART_PUT_IDR(port, ATMEL_US_TXRDY); + } + + /* +@@ -215,7 +245,17 @@ + { + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + +- UART_PUT_IER(port, ATMEL_US_TXRDY); ++ if (atmel_port->use_dma_tx) { ++ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) ++ /* The transmitter is already running. Yes, we ++ really need this.*/ ++ return; ++ ++ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */ ++ } ++ else ++ UART_PUT_IER(port, ATMEL_US_TXRDY); + } + + /* +@@ -225,7 +265,12 @@ + { + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + +- UART_PUT_IDR(port, ATMEL_US_RXRDY); ++ if (atmel_port->use_dma_rx) { ++ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */ ++ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); ++ } ++ else ++ UART_PUT_IDR(port, ATMEL_US_RXRDY); + } + + /* +@@ -248,6 +293,134 @@ + } + + /* ++ * Receive data via the PDC. A buffer has been fulled. ++ */ ++static void atmel_pdc_endrx(struct uart_port *port) ++{ ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; ++ struct tty_struct *tty = port->info->tty; ++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port); ++ unsigned int count; ++ ++ count = pdc->dma_size - pdc->ofs; ++ if (likely(count > 0)) { ++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); ++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); ++ tty_flip_buffer_push(tty); ++ ++ port->icount.rx += count; ++ } ++ ++ /* Set this buffer as the next receive buffer */ ++ pdc->ofs = 0; ++ UART_PUT_RNPR(port, pdc->dma_addr); ++ UART_PUT_RNCR(port, pdc->dma_size); ++ ++ /* Switch to next buffer */ ++ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */ ++} ++ ++/* ++ * Receive data via the PDC. At least one byte was received, but the ++ * buffer was not full when the inter-character timeout expired. ++ */ ++static void atmel_pdc_timeout(struct uart_port *port) ++{ ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; ++ struct tty_struct *tty = port->info->tty; ++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port); ++ /* unsigned */ int ofs, count; ++ ++ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */ ++ count = ofs - pdc->ofs; ++ ++ if (likely(count > 0)) { ++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); ++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); ++ tty_flip_buffer_push(tty); ++ ++ pdc->ofs = ofs; ++ port->icount.rx += count; ++ } ++ ++ /* reset the UART timeout */ ++ UART_PUT_CR(port, ATMEL_US_STTTO); ++} ++ ++/* ++ * Deal with parity, framing and overrun errors. ++ */ ++static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status) ++{ ++ /* clear error */ ++ UART_PUT_CR(port, ATMEL_US_RSTSTA); ++ ++ if (status & ATMEL_US_RXBRK) { ++ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */ ++ port->icount.brk++; ++ } ++ if (status & ATMEL_US_PARE) ++ port->icount.parity++; ++ if (status & ATMEL_US_FRAME) ++ port->icount.frame++; ++ if (status & ATMEL_US_OVRE) ++ port->icount.overrun++; ++} ++ ++/* ++ * A transmission via the PDC is complete. ++ */ ++static void atmel_pdc_endtx(struct uart_port *port) ++{ ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; ++ struct circ_buf *xmit = &port->info->xmit; ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; ++ ++ xmit->tail += pdc->ofs; ++ if (xmit->tail >= SERIAL_XMIT_SIZE) ++ xmit->tail -= SERIAL_XMIT_SIZE; ++ ++ port->icount.tx += pdc->ofs; ++ pdc->ofs = 0; ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(port); ++} ++ ++/* ++ * The PDC transmitter is idle, so either start the next transfer or ++ * disable the transmitter. ++ */ ++static void atmel_pdc_txbufe(struct uart_port *port) ++{ ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; ++ struct circ_buf *xmit = &port->info->xmit; ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; ++ int count; ++ ++ if (!uart_circ_empty(xmit)) { ++ /* more to transmit - setup next transfer */ ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ ++ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE); ++ ++ if (xmit->tail < xmit->head) ++ count = xmit->head - xmit->tail; ++ else ++ count = SERIAL_XMIT_SIZE - xmit->tail; ++ pdc->ofs = count; ++ ++ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); ++ UART_PUT_TCR(port, count); ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */ ++ } ++ else { ++ /* nothing left to transmit - disable the transmitter */ ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ ++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); ++ } ++} ++ ++/* + * Characters received (called from interrupt handler) + */ + static void atmel_rx_chars(struct uart_port *port) +@@ -349,6 +522,14 @@ + status = UART_GET_CSR(port); + pending = status & UART_GET_IMR(port); + while (pending) { ++ /* PDC receive */ ++ if (pending & ATMEL_US_ENDRX) ++ atmel_pdc_endrx(port); ++ if (pending & ATMEL_US_TIMEOUT) ++ atmel_pdc_timeout(port); ++ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE)) ++ atmel_pdc_rxerr(port, pending); ++ + /* Interrupt receive */ + if (pending & ATMEL_US_RXRDY) + atmel_rx_chars(port); +@@ -363,6 +544,12 @@ + if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC)) + wake_up_interruptible(&port->info->delta_msr_wait); + ++ /* PDC transmit */ ++ if (pending & ATMEL_US_ENDTX) ++ atmel_pdc_endtx(port); ++ if (pending & ATMEL_US_TXBUFE) ++ atmel_pdc_txbufe(port); ++ + /* Interrupt transmit */ + if (pending & ATMEL_US_TXRDY) + atmel_tx_chars(port); +@@ -401,6 +588,47 @@ + } + + /* ++ * Initialize DMA (if necessary) ++ */ ++ if (atmel_port->use_dma_rx) { ++ int i; ++ ++ for (i = 0; i < 2; i++) { ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; ++ ++ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); ++ if (pdc->buf == NULL) { ++ if (i != 0) { ++ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); ++ kfree(atmel_port->pdc_rx[0].buf); ++ } ++ free_irq(port->irq, port); ++ return -ENOMEM; ++ } ++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); ++ pdc->dma_size = PDC_BUFFER_SIZE; ++ pdc->ofs = 0; ++ } ++ ++ atmel_port->pdc_rx_idx = 0; ++ ++ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); ++ UART_PUT_RCR(port, PDC_BUFFER_SIZE); ++ ++ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); ++ UART_PUT_RNCR(port, PDC_BUFFER_SIZE); ++ } ++ if (atmel_port->use_dma_tx) { ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; ++ struct circ_buf *xmit = &port->info->xmit; ++ ++ pdc->buf = xmit->buf; ++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE); ++ pdc->dma_size = SERIAL_XMIT_SIZE; ++ pdc->ofs = 0; ++ } ++ ++ /* + * If there is a specific "open" function (to register + * control line interrupts) + */ +@@ -418,7 +646,15 @@ + UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */ + +- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */ ++ if (atmel_port->use_dma_rx) { ++ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */ ++ UART_PUT_CR(port, ATMEL_US_STTTO); ++ ++ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); ++ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */ ++ } ++ else ++ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */ + + return 0; + } +@@ -431,6 +667,31 @@ + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + + /* ++ * Ensure everything is stopped. ++ */ ++ atmel_stop_rx(port); ++ atmel_stop_tx(port); ++ ++ /* ++ * Shut-down the DMA. ++ */ ++ if (atmel_port->use_dma_rx) { ++ int i; ++ ++ for (i = 0; i < 2; i++) { ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; ++ ++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); ++ kfree(pdc->buf); ++ } ++ } ++ if (atmel_port->use_dma_tx) { ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; ++ ++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE); ++ } ++ ++ /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); +@@ -481,14 +742,20 @@ + */ + static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old) + { ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + unsigned long flags; + unsigned int mode, imr, quot, baud; + ++ /* Get current mode register */ ++ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR); ++ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + +- /* Get current mode register */ +- mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR); ++ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ ++ quot /= 8; ++ mode |= ATMEL_US_USCLKS_MCK_DIV8; ++ } + + /* byte size */ + switch (termios->c_cflag & CSIZE) { +@@ -534,6 +801,9 @@ + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= ATMEL_US_RXBRK; + ++ if (atmel_port->use_dma_rx) /* need to enable error interrupts */ ++ UART_PUT_IER(port, port->read_status_mask); ++ + /* + * Characters to ignore + */ +@@ -712,6 +982,13 @@ + clk_enable(atmel_port->clk); + port->uartclk = clk_get_rate(atmel_port->clk); + } ++ ++#ifdef SUPPORT_PDC ++ atmel_port->use_dma_rx = data->use_dma_rx; ++ atmel_port->use_dma_tx = data->use_dma_tx; ++ if (atmel_port->use_dma_tx) ++ port->fifosize = PDC_BUFFER_SIZE; ++#endif + } + + /* +@@ -888,7 +1165,8 @@ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + +- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock()) ++ if (device_may_wakeup(&pdev->dev) ++ && !clk_must_disable(atmel_port->clk)) + enable_irq_wake(port->irq); + else { + uart_suspend_port(&atmel_uart, port); +diff -urN -x CVS linux-2.6.21/drivers/serial/atmel_serial.h linux-2.6-stable/drivers/serial/atmel_serial.h +--- linux-2.6.21/drivers/serial/atmel_serial.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/serial/atmel_serial.h Tue May 8 12:13:31 2007 +@@ -46,6 +46,9 @@ + #define ATMEL_US_USMODE_ISO7816_T1 6 + #define ATMEL_US_USMODE_IRDA 8 + #define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */ ++#define ATMEL_US_USCLKS_MCK (0 << 4) ++#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) ++#define ATMEL_US_USCLKS_SCK (3 << 4) + #define ATMEL_US_CHRL (3 << 6) /* Character Length */ + #define ATMEL_US_CHRL_5 (0 << 6) + #define ATMEL_US_CHRL_6 (1 << 6) +diff -urN -x CVS linux-2.6.21/drivers/spi/Kconfig linux-2.6-stable/drivers/spi/Kconfig +--- linux-2.6.21/drivers/spi/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/spi/Kconfig Tue May 8 14:31:24 2007 +@@ -54,6 +54,7 @@ + config SPI_ATMEL + tristate "Atmel SPI Controller" + depends on (ARCH_AT91 || AVR32) && SPI_MASTER ++ select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200 + help + This selects a driver for the Atmel SPI Controller, present on + many AT32 (AVR32) and AT91 (ARM) chips. +@@ -82,6 +83,24 @@ + inexpensive battery powered microcontroller evaluation board. + This same cable can be used to flash new firmware. + ++config SPI_AT91 ++ tristate "AT91RM9200 Bitbang SPI Master" ++ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL ++ select SPI_BITBANG ++ select SPI_AT91_MANUAL_CS ++ help ++ This is dumb PIO bitbanging driver for the Atmel AT91RM9200. ++ The SPI_ATMEL driver will be its replacement, using the native ++ SPI hardware and its DMA controller. ++ ++config SPI_AT91_MANUAL_CS ++ bool ++ depends on ARCH_AT91RM9200 ++ help ++ Works around an AT91RM9200 problem whereby the SPI chip-select ++ will be wrongly disabled. The workaround uses those pins as ++ GPIOs instead of letting the SPI controller manage them. ++ + config SPI_IMX + tristate "Freescale iMX SPI controller" + depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL +diff -urN -x CVS linux-2.6.21/drivers/spi/Makefile linux-2.6-stable/drivers/spi/Makefile +--- linux-2.6.21/drivers/spi/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/spi/Makefile Tue May 8 14:31:24 2007 +@@ -20,6 +20,7 @@ + obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o + obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o + obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o ++obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) +diff -urN -x CVS linux-2.6.21/drivers/spi/spi_at91_bitbang.c linux-2.6-stable/drivers/spi/spi_at91_bitbang.c +--- linux-2.6.21/drivers/spi/spi_at91_bitbang.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/spi/spi_at91_bitbang.c Tue May 8 14:31:24 2007 +@@ -0,0 +1,207 @@ ++/* ++ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION) ++ * ++ * Copyright (C) 2006 David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++ ++#include <linux/spi/spi.h> ++#include <linux/spi/spi_bitbang.h> ++ ++#include <asm/arch/gpio.h> ++ ++ ++/* ++ * FIXME this bitbanging version is just to help bootstrap systems until ++ * there's a native SPI+IRQ+DMA controller driver ... such a driver should ++ * be a drop-in replacement for this one, and much faster. ++ * ++ * remember: ++ * ++ * - other at91 parts (like at91sam9) have multiple controllers ++ * and different pin muxing; this version is at91rm9200 specfic. ++ * ++ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins. ++ * ++ * - rm9200 spi chipselects drop wrongly, so the native driver ++ * will need to use gpios much like this does. ++ * ++ * - real hardware only allows 8..16 bits per word, while this ++ * bitbanger allows 1..32 (incompatible superset). ++ * ++ * - this disregards clock parameters. with inlined gpio calls, ++ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster ++ * than using the subroutined veresion from txrx_word(). ++ * ++ * - suspend/resume and <linux/clk.h> support is missing ... ++ */ ++ ++#define spi_miso_bit AT91_PIN_PA0 ++#define spi_mosi_bit AT91_PIN_PA1 ++#define spi_sck_bit AT91_PIN_PA2 ++ ++struct at91_spi { ++ struct spi_bitbang bitbang; ++ struct platform_device *pdev; ++}; ++ ++/*----------------------------------------------------------------------*/ ++ ++static inline void setsck(struct spi_device *spi, int is_on) ++{ ++ at91_set_gpio_value(spi_sck_bit, is_on); ++} ++ ++static inline void setmosi(struct spi_device *spi, int is_on) ++{ ++ at91_set_gpio_value(spi_mosi_bit, is_on); ++} ++ ++static inline int getmiso(struct spi_device *spi) ++{ ++ return at91_get_gpio_value(spi_miso_bit); ++} ++ ++static void at91_spi_chipselect(struct spi_device *spi, int is_active) ++{ ++ unsigned long cs = (unsigned long) spi->controller_data; ++ ++ /* set default clock polarity */ ++ if (is_active) ++ setsck(spi, spi->mode & SPI_CPOL); ++ ++ /* only support active-low (default) */ ++ at91_set_gpio_value(cs, !is_active); ++} ++ ++/* ++ * NOTE: this is "as fast as we can"; it should be a function of ++ * the device clock ... ++ */ ++#define spidelay(X) do{} while(0) ++ ++#define EXPAND_BITBANG_TXRX ++#include <linux/spi/spi_bitbang.h> ++ ++static u32 at91_spi_txrx_word_mode0(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8); ++} ++ ++static u32 at91_spi_txrx_word_mode1(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8); ++} ++ ++static u32 at91_spi_txrx_word_mode2(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8); ++} ++ ++static u32 at91_spi_txrx_word_mode3(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8); ++} ++ ++/*----------------------------------------------------------------------*/ ++ ++static int __init at91_spi_probe(struct platform_device *pdev) ++{ ++ int status; ++ struct spi_master *master; ++ struct at91_spi *at91_spi; ++ ++ if (pdev->id != 0) /* SPI0 bus */ ++ return -EINVAL; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi); ++ if (!master) ++ return -ENOMEM; ++ ++ at91_spi = spi_master_get_devdata(master); ++ at91_spi->pdev = pdev; ++ platform_set_drvdata(pdev, at91_spi); ++ ++ /* SPI and bitbang hookup */ ++ master->bus_num = 0; ++ master->num_chipselect = 4; ++ ++ at91_spi->bitbang.master = spi_master_get(master); ++ at91_spi->bitbang.chipselect = at91_spi_chipselect; ++ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0; ++ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1; ++ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2; ++ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3; ++ ++ status = spi_bitbang_start(&at91_spi->bitbang); ++ if (status < 0) ++ (void) spi_master_put(at91_spi->bitbang.master); ++ ++ return status; ++} ++ ++static int __exit at91_spi_remove(struct platform_device *pdev) ++{ ++ struct at91_spi *at91_spi = platform_get_drvdata(pdev); ++ int status; ++ ++ /* stop() unregisters child devices too */ ++ status = spi_bitbang_stop(&at91_spi->bitbang); ++ (void) spi_master_put(at91_spi->bitbang.master); ++ ++ platform_set_drvdata(pdev, NULL); ++ return status; ++} ++ ++static struct platform_driver at91_spi_driver = { ++ .probe = at91_spi_probe, ++ .remove = __exit_p(at91_spi_remove), ++ .driver = { ++ .name = "at91_spi", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init at91_spi_init(void) ++{ ++ at91_set_gpio_output(spi_sck_bit, 0); ++ at91_set_gpio_output(spi_mosi_bit, 0); ++ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */); ++ ++ /* register driver */ ++ return platform_driver_register(&at91_spi_driver); ++} ++ ++static void __exit at91_spi_exit(void) ++{ ++ platform_driver_unregister(&at91_spi_driver); ++} ++ ++device_initcall(at91_spi_init); ++module_exit(at91_spi_exit); ++ ++MODULE_ALIAS("at91_spi.0"); ++ ++MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)"); ++MODULE_AUTHOR("David Brownell"); ++MODULE_LICENSE("GPL"); +diff -urN -x CVS linux-2.6.21/drivers/usb/gadget/Kconfig linux-2.6-stable/drivers/usb/gadget/Kconfig +--- linux-2.6.21/drivers/usb/gadget/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/usb/gadget/Kconfig Wed May 9 10:20:54 2007 +@@ -189,7 +189,7 @@ + + config USB_GADGET_AT91 + boolean "AT91 USB Device Port" +- depends on ARCH_AT91 ++ depends on ARCH_AT91 && !ARCH_AT91SAM9RL + select USB_GADGET_SELECTED + help + Many Atmel AT91 processors (such as the AT91RM2000) have a +diff -urN -x CVS linux-2.6.21/drivers/usb/gadget/at91_udc.c linux-2.6-stable/drivers/usb/gadget/at91_udc.c +--- linux-2.6.21/drivers/usb/gadget/at91_udc.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/usb/gadget/at91_udc.c Tue May 8 12:13:31 2007 +@@ -1804,7 +1804,7 @@ + */ + if ((!udc->suspended && udc->addr) + || !wake +- || at91_suspend_entering_slow_clock()) { ++ || clk_must_disable(udc->fclk)) { + pullup(udc, 0); + wake = 0; + } else +diff -urN -x CVS linux-2.6.21/drivers/usb/host/ohci-at91.c linux-2.6-stable/drivers/usb/host/ohci-at91.c +--- linux-2.6.21/drivers/usb/host/ohci-at91.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/usb/host/ohci-at91.c Tue May 8 12:13:31 2007 +@@ -299,7 +299,7 @@ + * + * REVISIT: some boards will be able to turn VBUS off... + */ +- if (at91_suspend_entering_slow_clock()) { ++ if (clk_must_disable(fclk)) { + ohci_usb_reset (ohci); + at91_stop_clock(); + } +diff -urN -x CVS linux-2.6.21/drivers/video/Kconfig linux-2.6-stable/drivers/video/Kconfig +--- linux-2.6.21/drivers/video/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/video/Kconfig Thu May 10 12:34:41 2007 +@@ -663,6 +663,17 @@ + framebuffer. Product specs at + <http://www.erd.epson.com/vdc/html/products.htm>. + ++config FB_S1D15605 ++ tristate "Epson S1D15605 framebuffer support" ++ depends on FB ++ default m if MACH_KB9200 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Build in support for the S1D15605 Epson Research 128x64 ++ LCD controller as a framebuffer. ++ + config FB_S1D13XXX + tristate "Epson S1D13XXX framebuffer support" + depends on FB +@@ -674,6 +685,22 @@ + working with S1D13806). Product specs at + <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> + ++config FB_ATMEL ++ tristate "AT91/AT32 LCD Controller support" ++ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || AVR32) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This enables support for the AT91/AT32 LCD Controller. ++ ++config FB_INTSRAM ++ bool "Frame Buffer in internal SRAM" ++ depends on FB_ATMEL && ARCH_AT91SAM9261 ++ help ++ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want ++ to let frame buffer in external SDRAM. ++ + config FB_NVIDIA + tristate "nVidia Framebuffer Support" + depends on FB && PCI +diff -urN -x CVS linux-2.6.21/drivers/video/Makefile linux-2.6-stable/drivers/video/Makefile +--- linux-2.6.21/drivers/video/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/video/Makefile Thu May 10 12:34:01 2007 +@@ -75,6 +75,8 @@ + obj-$(CONFIG_FB_SA1100) += sa1100fb.o + obj-$(CONFIG_FB_HIT) += hitfb.o + obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o ++obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o ++obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o + obj-$(CONFIG_FB_PVR2) += pvr2fb.o + obj-$(CONFIG_FB_VOODOO1) += sstfb.o + obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +diff -urN -x CVS linux-2.6.21/drivers/video/atmel_lcdfb.c linux-2.6-stable/drivers/video/atmel_lcdfb.c +--- linux-2.6.21/drivers/video/atmel_lcdfb.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/video/atmel_lcdfb.c Thu May 10 12:34:01 2007 +@@ -0,0 +1,752 @@ ++/* ++ * Driver for AT91/AT32 LCD Controller ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/dma-mapping.h> ++#include <linux/interrupt.h> ++#include <linux/clk.h> ++#include <linux/fb.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/cpu.h> ++#include <asm/arch/gpio.h> ++ ++#include <video/atmel_lcdc.h> ++ ++#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) ++#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) ++ ++/* configurable parameters */ ++#define ATMEL_LCDC_CVAL_DEFAULT 0xc8 ++#define ATMEL_LCDC_DMA_BURST_LEN 8 ++ ++#if defined(CONFIG_ARCH_AT91SAM9263) ++#define ATMEL_LCDC_FIFO_SIZE 2048 ++#else ++#define ATMEL_LCDC_FIFO_SIZE 512 ++#endif ++ ++#if defined(CONFIG_ARCH_AT91) ++#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT ++ ++static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo, ++ struct fb_var_screeninfo *var) ++{ ++ ++} ++#elif defined(CONFIG_AVR32) ++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ ++ | FBINFO_PARTIAL_PAN_OK \ ++ | FBINFO_HWACCEL_XPAN \ ++ | FBINFO_HWACCEL_YPAN) ++ ++static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo, ++ struct fb_var_screeninfo *var) ++{ ++ u32 dma2dcfg; ++ u32 pixeloff; ++ ++ pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f; ++ ++ dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8; ++ dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET; ++ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg); ++ ++ /* Update configuration */ ++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, ++ lcdc_readl(sinfo, ATMEL_LCDC_DMACON) ++ | ATMEL_LCDC_DMAUPDT); ++} ++#endif ++ ++ ++static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = { ++ .type = FB_TYPE_PACKED_PIXELS, ++ .visual = FB_VISUAL_TRUECOLOR, ++ .xpanstep = 0, ++ .ypanstep = 0, ++ .ywrapstep = 0, ++ .accel = FB_ACCEL_NONE, ++}; ++ ++ ++static void atmel_lcdfb_update_dma(struct fb_info *info, ++ struct fb_var_screeninfo *var) ++{ ++ struct atmel_lcdfb_info *sinfo = info->par; ++ struct fb_fix_screeninfo *fix = &info->fix; ++ unsigned long dma_addr; ++ ++ dma_addr = (fix->smem_start + var->yoffset * fix->line_length ++ + var->xoffset * var->bits_per_pixel / 8); ++ ++ dma_addr &= ~3UL; ++ ++ /* Set framebuffer DMA base address and pixel offset */ ++ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr); ++ ++ atmel_lcdfb_update_dma2d(sinfo, var); ++} ++ ++static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo) ++{ ++ struct fb_info *info = sinfo->info; ++ ++ dma_free_writecombine(info->device, info->fix.smem_len, ++ info->screen_base, info->fix.smem_start); ++} ++ ++/** ++ * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory ++ * @sinfo: the frame buffer to allocate memory for ++ */ ++static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) ++{ ++ struct fb_info *info = sinfo->info; ++ struct fb_var_screeninfo *var = &info->var; ++ ++ info->fix.smem_len = (var->xres_virtual * var->yres_virtual ++ * ((var->bits_per_pixel + 7) / 8)); ++ ++ info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len, ++ (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL); ++ ++ if (!info->screen_base) { ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++/** ++ * atmel_lcdfb_check_var - Validates a var passed in. ++ * @var: frame buffer variable screen structure ++ * @info: frame buffer structure that represents a single frame buffer ++ * ++ * Checks to see if the hardware supports the state requested by ++ * var passed in. This function does not alter the hardware ++ * state!!! This means the data stored in struct fb_info and ++ * struct atmel_lcdfb_info do not change. This includes the var ++ * inside of struct fb_info. Do NOT change these. This function ++ * can be called on its own if we intent to only test a mode and ++ * not actually set it. The stuff in modedb.c is a example of ++ * this. If the var passed in is slightly off by what the ++ * hardware can support then we alter the var PASSED in to what ++ * we can do. If the hardware doesn't support mode change a ++ * -EINVAL will be returned by the upper layers. You don't need ++ * to implement this function then. If you hardware doesn't ++ * support changing the resolution then this function is not ++ * needed. In this case the driver would just provide a var that ++ * represents the static state the screen is in. ++ * ++ * Returns negative errno on error, or zero on success. ++ */ ++static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ struct device *dev = info->device; ++ struct atmel_lcdfb_info *sinfo = info->par; ++ unsigned long clk_value_khz; ++ ++ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; ++ ++ dev_dbg(dev, "%s:\n", __func__); ++ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres); ++ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock)); ++ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel); ++ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz); ++ ++ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) { ++ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock)); ++ return -EINVAL; ++ } ++ ++ /* Force same alignment for each line */ ++ var->xres = (var->xres + 3) & ~3UL; ++ var->xres_virtual = (var->xres_virtual + 3) & ~3UL; ++ ++ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0; ++ var->transp.msb_right = 0; ++ var->transp.offset = var->transp.length = 0; ++ var->xoffset = var->yoffset = 0; ++ ++ switch (var->bits_per_pixel) { ++ case 2: ++ case 4: ++ case 8: ++ var->red.offset = var->green.offset = var->blue.offset = 0; ++ var->red.length = var->green.length = var->blue.length ++ = var->bits_per_pixel; ++ break; ++ case 15: ++ case 16: ++ var->red.offset = 0; ++ var->green.offset = 5; ++ var->blue.offset = 10; ++ var->red.length = var->green.length = var->blue.length = 5; ++ break; ++ case 24: ++ case 32: ++ var->red.offset = 0; ++ var->green.offset = 8; ++ var->blue.offset = 16; ++ var->red.length = var->green.length = var->blue.length = 8; ++ break; ++ default: ++ dev_err(dev, "color depth %d not supported\n", ++ var->bits_per_pixel); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * atmel_lcdfb_set_par - Alters the hardware state. ++ * @info: frame buffer structure that represents a single frame buffer ++ * ++ * Using the fb_var_screeninfo in fb_info we set the resolution ++ * of the this particular framebuffer. This function alters the ++ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't ++ * not alter var in fb_info since we are using that data. This ++ * means we depend on the data in var inside fb_info to be ++ * supported by the hardware. atmel_lcdfb_check_var is always called ++ * before atmel_lcdfb_set_par to ensure this. Again if you can't ++ * change the resolution you don't need this function. ++ * ++ */ ++static int atmel_lcdfb_set_par(struct fb_info *info) ++{ ++ struct atmel_lcdfb_info *sinfo = info->par; ++ unsigned long value; ++ unsigned long clk_value_khz; ++ ++ dev_dbg(info->device, "%s:\n", __func__); ++ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n", ++ info->var.xres, info->var.yres, ++ info->var.xres_virtual, info->var.yres_virtual); ++ ++ /* Turn off the LCD controller and the DMA controller */ ++ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); ++ ++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); ++ ++ if (info->var.bits_per_pixel <= 8) ++ info->fix.visual = FB_VISUAL_PSEUDOCOLOR; ++ else ++ info->fix.visual = FB_VISUAL_TRUECOLOR; ++ ++ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8); ++ ++ /* Re-initialize the DMA engine... */ ++ dev_dbg(info->device, " * update DMA engine\n"); ++ atmel_lcdfb_update_dma(info, &info->var); ++ ++ /* ...set frame size and burst length = 8 words (?) */ ++ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32; ++ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET); ++ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value); ++ ++ /* Now, the LCDC core... */ ++ ++ /* Set pixel clock */ ++ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; ++ ++ value = clk_value_khz / PICOS2KHZ(info->var.pixclock); ++ ++ if (clk_value_khz % PICOS2KHZ(info->var.pixclock)) ++ value++; ++ ++ value = (value / 2) - 1; ++ ++ if (value <= 0) { ++ dev_notice(info->device, "Bypassing pixel clock divider\n"); ++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); ++ } else ++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET); ++ ++ /* Initialize control register 2 */ ++ value = sinfo->default_lcdcon2; ++ ++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) ++ value |= ATMEL_LCDC_INVLINE_INVERTED; ++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) ++ value |= ATMEL_LCDC_INVFRAME_INVERTED; ++ ++ switch (info->var.bits_per_pixel) { ++ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break; ++ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break; ++ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break; ++ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break; ++ case 15: /* fall through */ ++ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break; ++ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break; ++ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break; ++ default: BUG(); break; ++ } ++ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value); ++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value); ++ ++ /* Vertical timing */ ++ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET; ++ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET; ++ value |= info->var.lower_margin; ++ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value); ++ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value); ++ ++ /* Horizontal timing */ ++ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET; ++ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET; ++ value |= (info->var.left_margin - 1); ++ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value); ++ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value); ++ ++ /* Display size */ ++ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET; ++ value |= info->var.yres - 1; ++ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value); ++ ++ /* FIFO Threshold: Use formula from data sheet */ ++ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3); ++ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value); ++ ++ /* Toggle LCD_MODE every frame */ ++ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0); ++ ++ /* Disable all interrupts */ ++ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); ++ ++ /* Set contrast */ ++ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE; ++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value); ++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); ++ /* ...wait for DMA engine to become idle... */ ++ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) ++ msleep(10); ++ ++ dev_dbg(info->device, " * re-enable DMA engine\n"); ++ /* ...and enable it with updated configuration */ ++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon); ++ ++ dev_dbg(info->device, " * re-enable LCDC core\n"); ++ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, ++ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); ++ ++ dev_dbg(info->device, " * DONE\n"); ++ ++ return 0; ++} ++ ++static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf) ++{ ++ chan &= 0xffff; ++ chan >>= 16 - bf->length; ++ return chan << bf->offset; ++} ++ ++/** ++ * atmel_lcdfb_setcolreg - Optional function. Sets a color register. ++ * @regno: Which register in the CLUT we are programming ++ * @red: The red value which can be up to 16 bits wide ++ * @green: The green value which can be up to 16 bits wide ++ * @blue: The blue value which can be up to 16 bits wide. ++ * @transp: If supported the alpha value which can be up to 16 bits wide. ++ * @info: frame buffer info structure ++ * ++ * Set a single color register. The values supplied have a 16 bit ++ * magnitude which needs to be scaled in this function for the hardware. ++ * Things to take into consideration are how many color registers, if ++ * any, are supported with the current color visual. With truecolor mode ++ * no color palettes are supported. Here a psuedo palette is created ++ * which we store the value in pseudo_palette in struct fb_info. For ++ * pseudocolor mode we have a limited color palette. To deal with this ++ * we can program what color is displayed for a particular pixel value. ++ * DirectColor is similar in that we can program each color field. If ++ * we have a static colormap we don't need to implement this function. ++ * ++ * Returns negative errno on error, or zero on success. In an ++ * ideal world, this would have been the case, but as it turns ++ * out, the other drivers return 1 on failure, so that's what ++ * we're going to do. ++ */ ++static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red, ++ unsigned int green, unsigned int blue, ++ unsigned int transp, struct fb_info *info) ++{ ++ struct atmel_lcdfb_info *sinfo = info->par; ++ unsigned int val; ++ u32 *pal; ++ int ret = 1; ++ ++ if (info->var.grayscale) ++ red = green = blue = (19595 * red + 38470 * green ++ + 7471 * blue) >> 16; ++ ++ switch (info->fix.visual) { ++ case FB_VISUAL_TRUECOLOR: ++ if (regno < 16) { ++ pal = info->pseudo_palette; ++ ++ val = chan_to_field(red, &info->var.red); ++ val |= chan_to_field(green, &info->var.green); ++ val |= chan_to_field(blue, &info->var.blue); ++ ++ pal[regno] = val; ++ ret = 0; ++ } ++ break; ++ ++ case FB_VISUAL_PSEUDOCOLOR: ++ if (regno < 256) { ++ val = ((red >> 11) & 0x001f); ++ val |= ((green >> 6) & 0x03e0); ++ val |= ((blue >> 1) & 0x7c00); ++ ++ /* ++ * TODO: intensity bit. Maybe something like ++ * ~(red[10] ^ green[10] ^ blue[10]) & 1 ++ */ ++ ++ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val); ++ ret = 0; ++ } ++ break; ++ } ++ ++ return ret; ++} ++ ++static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ dev_dbg(info->device, "%s\n", __func__); ++ ++ atmel_lcdfb_update_dma(info, var); ++ ++ return 0; ++} ++ ++static struct fb_ops atmel_lcdfb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = atmel_lcdfb_check_var, ++ .fb_set_par = atmel_lcdfb_set_par, ++ .fb_setcolreg = atmel_lcdfb_setcolreg, ++ .fb_pan_display = atmel_lcdfb_pan_display, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++}; ++ ++static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id) ++{ ++ struct fb_info *info = dev_id; ++ struct atmel_lcdfb_info *sinfo = info->par; ++ u32 status; ++ ++ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR); ++ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status); ++ return IRQ_HANDLED; ++} ++ ++static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo) ++{ ++ struct fb_info *info = sinfo->info; ++ int ret = 0; ++ ++ memset_io(info->screen_base, 0, info->fix.smem_len); ++ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; ++ ++ dev_info(info->device, ++ "%luKiB frame buffer at %08lx (mapped at %p)\n", ++ (unsigned long)info->fix.smem_len / 1024, ++ (unsigned long)info->fix.smem_start, ++ info->screen_base); ++ ++ /* Allocate colormap */ ++ ret = fb_alloc_cmap(&info->cmap, 256, 0); ++ if (ret < 0) ++ dev_err(info->device, "Alloc color map failed\n"); ++ ++ return ret; ++} ++ ++static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo) ++{ ++ if (sinfo->bus_clk) ++ clk_enable(sinfo->bus_clk); ++ clk_enable(sinfo->lcdc_clk); ++} ++ ++static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) ++{ ++ if (sinfo->bus_clk) ++ clk_disable(sinfo->bus_clk); ++ clk_disable(sinfo->lcdc_clk); ++} ++ ++ ++static int __init atmel_lcdfb_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fb_info *info; ++ struct atmel_lcdfb_info *sinfo; ++ struct atmel_lcdfb_info *pdata_sinfo; ++ struct resource *regs = NULL; ++ struct resource *map = NULL; ++ int ret; ++ ++ dev_dbg(dev, "%s BEGIN\n", __func__); ++ ++ ret = -ENOMEM; ++ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev); ++ if (!info) { ++ dev_err(dev, "cannot allocate memory\n"); ++ goto out; ++ } ++ ++ sinfo = info->par; ++ ++ if (dev->platform_data) { ++ pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data; ++ sinfo->default_bpp = pdata_sinfo->default_bpp; ++ sinfo->default_dmacon = pdata_sinfo->default_dmacon; ++ sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2; ++ sinfo->default_monspecs = pdata_sinfo->default_monspecs; ++ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control; ++ sinfo->guard_time = pdata_sinfo->guard_time; ++ } else { ++ dev_err(dev, "cannot get default configuration\n"); ++ goto free_info; ++ } ++ sinfo->info = info; ++ sinfo->pdev = pdev; ++ ++ strcpy(info->fix.id, sinfo->pdev->name); ++ info->flags = ATMEL_LCDFB_FBINFO_DEFAULT; ++ info->pseudo_palette = sinfo->pseudo_palette; ++ info->fbops = &atmel_lcdfb_ops; ++ ++ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs)); ++ info->fix = atmel_lcdfb_fix; ++ ++ /* Enable LCDC Clocks */ ++ if (cpu_is_at91sam9261()) { ++ sinfo->bus_clk = clk_get(dev, "hck1"); ++ if (IS_ERR(sinfo->bus_clk)) { ++ ret = PTR_ERR(sinfo->bus_clk); ++ goto free_info; ++ } ++ } ++ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk"); ++ if (IS_ERR(sinfo->lcdc_clk)) { ++ ret = PTR_ERR(sinfo->lcdc_clk); ++ goto put_bus_clk; ++ } ++ atmel_lcdfb_start_clock(sinfo); ++ ++ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb, ++ info->monspecs.modedb_len, info->monspecs.modedb, ++ sinfo->default_bpp); ++ if (!ret) { ++ dev_err(dev, "no suitable video mode found\n"); ++ goto stop_clk; ++ } ++ ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ dev_err(dev, "resources unusable\n"); ++ ret = -ENXIO; ++ goto stop_clk; ++ } ++ ++ sinfo->irq_base = platform_get_irq(pdev, 0); ++ if (sinfo->irq_base < 0) { ++ dev_err(dev, "unable to get irq\n"); ++ ret = sinfo->irq_base; ++ goto stop_clk; ++ } ++ ++ /* Initialize video memory */ ++ map = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ if (map) { ++ /* use a pre-allocated memory buffer */ ++ info->fix.smem_start = map->start; ++ info->fix.smem_len = map->end - map->start + 1; ++ if (!request_mem_region(info->fix.smem_start, ++ info->fix.smem_len, pdev->name)) { ++ ret = -EBUSY; ++ goto stop_clk; ++ } ++ ++ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); ++ if (!info->screen_base) ++ goto release_intmem; ++ } else { ++ /* alocate memory buffer */ ++ ret = atmel_lcdfb_alloc_video_memory(sinfo); ++ if (ret < 0) { ++ dev_err(dev, "cannot allocate framebuffer: %d\n", ret); ++ goto stop_clk; ++ } ++ } ++ ++ /* LCDC registers */ ++ info->fix.mmio_start = regs->start; ++ info->fix.mmio_len = regs->end - regs->start + 1; ++ ++ if (!request_mem_region(info->fix.mmio_start, ++ info->fix.mmio_len, pdev->name)) { ++ ret = -EBUSY; ++ goto free_fb; ++ } ++ ++ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len); ++ if (!sinfo->mmio) { ++ dev_err(dev, "cannot map LCDC registers\n"); ++ goto release_mem; ++ } ++ ++ /* interrupt */ ++ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info); ++ if (ret) { ++ dev_err(dev, "request_irq failed: %d\n", ret); ++ goto unmap_mmio; ++ } ++ ++ ret = atmel_lcdfb_init_fbinfo(sinfo); ++ if (ret < 0) { ++ dev_err(dev, "init fbinfo failed: %d\n", ret); ++ goto unregister_irqs; ++ } ++ ++ /* ++ * This makes sure that our colour bitfield ++ * descriptors are correctly initialised. ++ */ ++ atmel_lcdfb_check_var(&info->var, info); ++ ++ ret = fb_set_var(info, &info->var); ++ if (ret) { ++ dev_warn(dev, "unable to set display parameters\n"); ++ goto free_cmap; ++ } ++ ++ dev_set_drvdata(dev, info); ++ ++ /* ++ * Tell the world that we're ready to go ++ */ ++ ret = register_framebuffer(info); ++ if (ret < 0) { ++ dev_err(dev, "failed to register framebuffer device: %d\n", ret); ++ goto free_cmap; ++ } ++ ++ /* Power up the LCDC screen */ ++ if (sinfo->atmel_lcdfb_power_control) ++ sinfo->atmel_lcdfb_power_control(1); ++ ++ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n", ++ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base); ++ ++ return 0; ++ ++ ++free_cmap: ++ fb_dealloc_cmap(&info->cmap); ++unregister_irqs: ++ free_irq(sinfo->irq_base, info); ++unmap_mmio: ++ iounmap(sinfo->mmio); ++release_mem: ++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); ++free_fb: ++ if (map) ++ iounmap(info->screen_base); ++ else ++ atmel_lcdfb_free_video_memory(sinfo); ++ ++release_intmem: ++ if (map) ++ release_mem_region(info->fix.smem_start, info->fix.smem_len); ++stop_clk: ++ atmel_lcdfb_stop_clock(sinfo); ++ clk_put(sinfo->lcdc_clk); ++put_bus_clk: ++ if (sinfo->bus_clk) ++ clk_put(sinfo->bus_clk); ++free_info: ++ framebuffer_release(info); ++out: ++ dev_dbg(dev, "%s FAILED\n", __func__); ++ return ret; ++} ++ ++static int __exit atmel_lcdfb_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fb_info *info = dev_get_drvdata(dev); ++ struct atmel_lcdfb_info *sinfo = info->par; ++ ++ if (!sinfo) ++ return 0; ++ ++ if (sinfo->atmel_lcdfb_power_control) ++ sinfo->atmel_lcdfb_power_control(0); ++ unregister_framebuffer(info); ++ atmel_lcdfb_stop_clock(sinfo); ++ clk_put(sinfo->lcdc_clk); ++ if (sinfo->bus_clk) ++ clk_put(sinfo->bus_clk); ++ fb_dealloc_cmap(&info->cmap); ++ free_irq(sinfo->irq_base, info); ++ iounmap(sinfo->mmio); ++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); ++ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) { ++ iounmap(info->screen_base); ++ release_mem_region(info->fix.smem_start, info->fix.smem_len); ++ } else { ++ atmel_lcdfb_free_video_memory(sinfo); ++ } ++ ++ dev_set_drvdata(dev, NULL); ++ framebuffer_release(info); ++ ++ return 0; ++} ++ ++static struct platform_driver atmel_lcdfb_driver = { ++ .remove = __exit_p(atmel_lcdfb_remove), ++ .driver = { ++ .name = "atmel_lcdfb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init atmel_lcdfb_init(void) ++{ ++ return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe); ++} ++ ++static void __exit atmel_lcdfb_exit(void) ++{ ++ platform_driver_unregister(&atmel_lcdfb_driver); ++} ++ ++module_init(atmel_lcdfb_init); ++module_exit(atmel_lcdfb_exit); ++ ++MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver"); ++MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>"); ++MODULE_LICENSE("GPL"); +diff -urN -x CVS linux-2.6.21/drivers/video/backlight/Kconfig linux-2.6-stable/drivers/video/backlight/Kconfig +--- linux-2.6.21/drivers/video/backlight/Kconfig Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/video/backlight/Kconfig Tue May 8 12:13:31 2007 +@@ -63,3 +63,11 @@ + help + If you have a Frontpath ProGear say Y to enable the + backlight driver. ++ ++config BACKLIGHT_KB920x ++ tristate "KwikByte KB9202 Backlight Driver" ++ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200 ++ default y ++ help ++ If you have a KwikByte KB9202 board, say Y to enable the ++ backlight driver. +diff -urN -x CVS linux-2.6.21/drivers/video/backlight/Makefile linux-2.6-stable/drivers/video/backlight/Makefile +--- linux-2.6.21/drivers/video/backlight/Makefile Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/drivers/video/backlight/Makefile Tue May 8 12:13:31 2007 +@@ -6,3 +6,4 @@ + obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o + obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o + obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o ++obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o +diff -urN -x CVS linux-2.6.21/drivers/video/backlight/kb920x_bl.c linux-2.6-stable/drivers/video/backlight/kb920x_bl.c +--- linux-2.6.21/drivers/video/backlight/kb920x_bl.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/video/backlight/kb920x_bl.c Tue May 8 12:13:31 2007 +@@ -0,0 +1,164 @@ ++/* ++ * Backlight Driver for KB9202 ++ * ++ * Copyright (c) 2006 KwikByte ++ * ++ * Based on Sharp's Corgi Backlight Driver ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/spinlock.h> ++#include <linux/fb.h> ++#include <linux/backlight.h> ++ ++#include <asm/arch/gpio.h> ++ ++/* The backlight is on(1)/off(0) */ ++#define KB9202_DEFAULT_INTENSITY 1 ++#define KB9202_MAX_INTENSITY 1 ++ ++static int kb9202bl_suspended; ++static int current_intensity = 0; ++static DEFINE_SPINLOCK(bl_lock); ++ ++static int kb9202bl_set_intensity(struct backlight_device *bd) ++{ ++ unsigned long flags; ++ int intensity = bd->props.brightness; ++ ++ if (bd->props.power != FB_BLANK_UNBLANK) ++ intensity = 0; ++ if (bd->props.fb_blank != FB_BLANK_UNBLANK) ++ intensity = 0; ++ if (kb9202bl_suspended) ++ intensity = 0; ++ ++ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK)) ++ intensity = 1; ++ ++ spin_lock_irqsave(&bl_lock, flags); ++ if (intensity) ++ gpio_set_value(AT91_PIN_PC23, 1); ++ else ++ gpio_set_value(AT91_PIN_PC23, 0); ++ spin_unlock_irqrestore(&bl_lock, flags); ++ ++ current_intensity = intensity; ++ ++ return 0; ++} ++ ++static int kb9202bl_get_intensity(struct backlight_device *bd) ++{ ++ return current_intensity; ++} ++ ++static struct backlight_ops kb9202bl_ops = { ++ .get_brightness = kb9202bl_get_intensity, ++ .update_status = kb9202bl_set_intensity, ++}; ++ ++static int __init kb9202bl_probe(struct platform_device *pdev) ++{ ++ struct backlight_device *bd; ++ ++ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops); ++ if (IS_ERR(bd)) ++ return PTR_ERR(bd); ++ ++ platform_set_drvdata(pdev, bd); ++ ++ bd->props.max_brightness = KB9202_MAX_INTENSITY; ++ bd->props.brightness = KB9202_DEFAULT_INTENSITY; ++ (void) kb9202bl_set_intensity(bd); ++ ++ return 0; ++} ++ ++static int kb9202bl_remove(struct platform_device *pdev) ++{ ++ struct backlight_device *bd = platform_get_drvdata(pdev); ++ ++ bd->props.brightness = 0; ++ bd->props.power = 0; ++ (void) kb9202bl_set_intensity(bd); ++ ++ backlight_device_unregister(bd); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int kb9202bl_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct backlight_device *bd = platform_get_drvdata(pdev); ++ ++ kb9202bl_suspended = 1; ++ (void) kb9202bl_set_intensity(bd); ++ return 0; ++} ++ ++static int kb9202bl_resume(struct platform_device *dev) ++{ ++ struct backlight_device *bd = platform_get_drvdata(pdev); ++ ++ kb9202bl_suspended = 0; ++ (void) kb9202bl_set_intensity(bd); ++ return 0; ++} ++#else ++#define kb9202bl_suspend NULL ++#define kb9202bl_resume NULL ++#endif ++ ++static struct platform_driver kb9202bl_driver = { ++ .probe = kb9202bl_probe, ++ .remove = kb9202bl_remove, ++ .suspend = kb9202bl_suspend, ++ .resume = kb9202bl_resume, ++ .driver = { ++ .name = "kb9202-bl", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_device *kb9202bl_device; ++ ++static int __init kb9202bl_init(void) ++{ ++ int ret; ++ ++ ret = platform_driver_register(&kb9202bl_driver); ++ if (!ret) { ++ kb9202bl_device = platform_device_alloc("kb9202-bl", -1); ++ if (!kb9202bl_device) ++ return -ENOMEM; ++ ++ ret = platform_device_add(kb9202bl_device); ++ if (ret) { ++ platform_device_put(kb9202bl_device); ++ platform_driver_unregister(&kb9202bl_driver); ++ } ++ } ++ return ret; ++} ++ ++static void __exit kb9202bl_exit(void) ++{ ++ platform_device_unregister(kb9202bl_device); ++ platform_driver_unregister(&kb9202bl_driver); ++} ++ ++module_init(kb9202bl_init); ++module_exit(kb9202bl_exit); ++ ++MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>"); ++MODULE_DESCRIPTION("KB9202 Backlight Driver"); ++MODULE_LICENSE("GPL"); +diff -urN -x CVS linux-2.6.21/drivers/video/s1d15605fb.c linux-2.6-stable/drivers/video/s1d15605fb.c +--- linux-2.6.21/drivers/video/s1d15605fb.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/drivers/video/s1d15605fb.c Tue May 8 12:13:31 2007 +@@ -0,0 +1,659 @@ ++/* ++ * drivers/video/s1d15605.c ++ * ++ * Adapted from several sources including: ++ * 1) Driver for AT91 LCD Controller ++ * Copyright (C) 2006 Atmel ++ * ++ * 2) Copyright (C) 2005 S. Kevin Hester ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD ++ * display. This display uses a clone of the common Epson SED 1531 display ++ * controller. ++ * ++ * I've heavily borrowed code from the vfb.c driver. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifdef DEBUG ++#define MSG(string, args...) printk("s1d15605fb:" string, ##args) ++#else ++#define MSG(string, args...) ++#endif ++ ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/dma-mapping.h> ++#include <linux/interrupt.h> ++#include <linux/clk.h> ++#include <linux/fb.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++ ++#include <asm/uaccess.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++#ifdef CONFIG_PMAC_BACKLIGHT ++#include <asm/backlight.h> ++#endif ++ ++#define VIDEOWIDTH 128 ++#define VIDEOHEIGHT 64 ++#define VIDEODEPTH 1 /* bits/pixel */ ++#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8) ++ ++/* The number of bytes that actually go to the device */ ++#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT) ++#define VIDEOMEMSIZE PAGE_SIZE ++ ++static struct fb_var_screeninfo s1d15605_default __initdata = { ++ .xres = VIDEOWIDTH, ++ .yres = VIDEOHEIGHT, ++ .xres_virtual = VIDEOWIDTH, ++ .yres_virtual = VIDEOHEIGHT, ++ .bits_per_pixel = VIDEODEPTH, ++ .red = { 0, 1, 0 }, ++ .green = { 0, 1, 0 }, ++ .blue = { 0, 1, 0 }, ++ .activate = FB_ACTIVATE_NOW, ++ .pixclock = 20000, ++ .vmode = FB_VMODE_NONINTERLACED, ++}; ++ ++static struct fb_fix_screeninfo s1d15605_fix __initdata = { ++ .id = "s1d15605", ++ .type = FB_TYPE_PACKED_PIXELS, ++ .visual = FB_VISUAL_MONO10, ++ .xpanstep = 0, ++ .ypanstep = 0, ++ .ywrapstep = 0, ++ .accel = FB_ACCEL_NONE, ++}; ++ ++struct s1d15605fb_info { ++ struct fb_info *info; ++ char *mmio; ++ unsigned long reset_pin; ++ struct platform_device *pdev; ++}; ++ ++/* ++ * LCD device interface ++ */ ++#define RESET_DISPLAY 0xE2 ++#define LCD_BIAS_1_9 0xA2 ++#define ADC_SELECT_REVERSE 0xA1 ++#define COMMON_OUTPUT_NORMAL 0xC0 ++#define V5_RESISTOR_RATIO 0x26 ++#define ELECTRONIC_VOLUME_SET 0x81 ++#define ELECTRONIC_VOLUME_INIT 0x20 ++#define POWER_CONTROL_SET 0x28 ++#define VOLTAGE_REGULATOR 0x02 ++#define VOLTAGE_FOLLOWER 0x01 ++#define BOOSTER_CIRCUIT 0x04 ++#define DISPLAY_ON 0xAF ++#define START_LINE_SET 0x40 ++#define PAGE_ADDRESS_SET 0xB0 ++#define COLUMN_ADDRESS_HIGH 0x10 ++#define COLUMN_ADDRESS_LOW 0x00 ++#define RESISTOR_RATIO_START 0x20 ++ ++#define NUM_OF_PAGES 8 ++#define NUM_OF_COLUMNS 128 ++ ++#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio) ++#define READ_COMMAND __raw_readb((sinfo)->mmio) ++#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000)) ++#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000)) ++ ++ ++/* ++ * s1d15605fb_resize_framebuffer ++ * ++ * Free allocated space if different. Allocate on new of changed. ++ * Returns -ENOMEM if the new framebuffer can not be allocated, ++ * zero on success. ++ */ ++static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo) ++{ ++ struct fb_info *info = sinfo->info; ++ struct fb_fix_screeninfo *fix = &info->fix; ++ struct fb_var_screeninfo *var = &info->var; ++ unsigned int new_size; ++ void *new_vaddr; ++ ++ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8); ++ ++ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__, ++ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size); ++ ++ if (new_size == fix->smem_len) ++ return 0; ++ ++ if (fix->smem_len) { ++ kfree(info->screen_base); ++ } ++ ++ new_vaddr = kmalloc(new_size, GFP_KERNEL); ++ ++ if (!new_vaddr) { ++ fix->smem_len = 0; ++ return -ENOMEM; ++ } ++ ++ info->screen_base = new_vaddr; ++ fix->smem_start = (unsigned)new_vaddr; ++ fix->smem_len = new_size; ++ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8; ++ ++ dev_info(info->device, ++ "%luKiB frame buffer at %08lx (mapped at %p)\n", ++ (unsigned long)info->fix.smem_len / 1024, ++ (unsigned long)info->fix.smem_start, ++ info->screen_base); ++ ++ return 0; ++} ++ ++ ++/* ++ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to ++ * bottom) each page seems to be eight pixels high, where these eight pixels are ++ * one byte ++ */ ++static void s1d15605_update(struct fb_info *info) ++{ ++ struct s1d15605fb_info *sinfo = info->par; ++ int page, i, row, colmask; ++ u8 retVal, *rowPtr; ++ ++ WRITE_COMMAND(START_LINE_SET); ++ for (page = 0; page < NUM_OF_PAGES; ++page) { ++ WRITE_COMMAND(PAGE_ADDRESS_SET + page); ++ WRITE_COMMAND(COLUMN_ADDRESS_HIGH); ++ WRITE_COMMAND(COLUMN_ADDRESS_LOW); ++ ++ for (i = 0; i < NUM_OF_COLUMNS; ++i) ++ { ++ /* point of opportunity: optimization */ ++ colmask = (1 << (i & 0x7)); ++ rowPtr = (u8*)(info->screen_base); ++ rowPtr += (VIDEOWIDTH_BYTES * 8 * page); ++ rowPtr += (i >> 3); ++ retVal = 0; ++ for (row = 0; row < 8; ++row) ++ { ++ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0); ++ rowPtr += VIDEOWIDTH_BYTES; ++ } ++ WRITE_DATA(retVal); ++ } ++ } ++ ++ WRITE_COMMAND(DISPLAY_ON); ++} ++ ++ ++/* ++ * Setting the video mode has been split into two parts. ++ * First part, xxxfb_check_var, must not write anything ++ * to hardware, it should only verify and adjust var. ++ * This means it doesn't alter par but it does use hardware ++ * data from it to check this var. ++ */ ++static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ /* ++ * Some very basic checks ++ */ ++ if (!var->xres) ++ var->xres = 1; ++ if (!var->yres) ++ var->yres = 1; ++ if (var->xres > var->xres_virtual) ++ var->xres_virtual = var->xres; ++ if (var->yres > var->yres_virtual) ++ var->yres_virtual = var->yres; ++ ++ if(var->bits_per_pixel > VIDEODEPTH) ++ return -EINVAL; ++ ++ /* ++ * Memory limit ++ */ ++ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) > ++ ACTUALVIDEOMEMSIZE) ++ return -ENOMEM; ++ ++ /* ++ * Now that we checked it we alter var. The reason being is that the video ++ * mode passed in might not work but slight changes to it might make it ++ * work. This way we let the user know what is acceptable. ++ */ ++ switch (var->bits_per_pixel) { ++ case 1: ++ var->red.offset = var->green.offset = var->blue.offset = 0; ++ var->red.length = var->green.length = var->blue.length ++ = var->bits_per_pixel; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ var->xoffset = var->yoffset = 0; ++ var->red.msb_right = var->green.msb_right = var->blue.msb_right = ++ var->transp.msb_right = 0; ++ ++ return 0; ++} ++ ++ ++/* ++ * This routine actually sets the video mode. It's in here where we ++ * the hardware state info->par and fix which can be affected by the ++ * change in par. For this driver it doesn't do much. ++ */ ++static int s1d15605_set_par(struct fb_info *info) ++{ ++ int ret; ++ ++ MSG("%s:\n", __func__); ++ MSG(" * resolution: %ux%u (%ux%u virtual)\n", ++ info->var.xres, info->var.yres, ++ info->var.xres_virtual, info->var.yres_virtual); ++ ++ ret = s1d15605fb_resize_framebuffer(info->par); ++ ++ info->fix.visual = FB_VISUAL_MONO10; ++ return ret; ++} ++ ++ ++/* ++ * Set a single color register. The values supplied are already ++ * rounded down to the hardware's capabilities (according to the ++ * entries in the var structure). Return != 0 for invalid regno. ++ */ ++static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue, ++ u_int transp, struct fb_info *info) ++{ ++ if (regno > 1) /* no. of hw registers - we only do mono now */ ++ return 1; ++ ++ return 0; ++} ++ ++ ++/* ++ * Currently, the routine will simply shut-off the backlight and prevent ++ * updates/refreshes. Modify according to application. ++ * ++ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off ++ */ ++static int s1d15605_blank(int blank, struct fb_info *info) ++{ ++#ifdef CONFIG_PMAC_BACKLIGHT ++ if (blank) ++ pmac_backlight->props.power = FB_BLANK_POWERDOWN; ++ else ++ pmac_backlight->props.power = FB_BLANK_UNBLANK; ++ backlight_update_status(pmac_backlight); ++#endif ++ return 1; ++} ++ ++ ++/* ++ * Pan or Wrap the Display ++ * ++ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag ++ */ ++/* ++static int s1d15605_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ if (var->vmode & FB_VMODE_YWRAP) { ++ if (var->yoffset < 0 ++ || var->yoffset >= info->var.yres_virtual ++ || var->xoffset) ++ return -EINVAL; ++ } else { ++ if (var->xoffset + var->xres > info->var.xres_virtual || ++ var->yoffset + var->yres > info->var.yres_virtual) ++ return -EINVAL; ++ } ++ info->var.xoffset = var->xoffset; ++ info->var.yoffset = var->yoffset; ++ if (var->vmode & FB_VMODE_YWRAP) ++ info->var.vmode |= FB_VMODE_YWRAP; ++ else ++ info->var.vmode &= ~FB_VMODE_YWRAP; ++ return 0; ++} ++*/ ++ ++ ++static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region) ++{ ++ cfb_copyarea(info, region); ++ s1d15605_update(info); ++} ++ ++ ++static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect) ++{ ++ cfb_fillrect(info, rect); ++ s1d15605_update(info); ++} ++ ++ ++static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image) ++{ ++ cfb_imageblit(p, image); ++ s1d15605_update(p); ++} ++ ++ ++/* ++ * Write the users data to our framebuffer, and then trigger a psuedo DMA ++ */ ++static ssize_t s1d15605_write(struct file *file, const char *buf, ++ size_t count, loff_t *ppos) ++{ ++ unsigned long p = *ppos; ++ struct inode *inode = file->f_dentry->d_inode; ++ int fbidx = iminor(inode); ++ struct fb_info *info = registered_fb[fbidx]; ++ int err; ++ ++ if (p > info->fix.smem_len) ++ return -ENOSPC; ++ if (count >= info->fix.smem_len) ++ count = info->fix.smem_len; ++ err = 0; ++ if (count + p > info->fix.smem_len) { ++ count = info->fix.smem_len - p; ++ err = -ENOSPC; ++ } ++ if (count) { ++ char *base_addr; ++ ++ base_addr = info->screen_base; ++ count -= copy_from_user(base_addr+p, buf, count); ++ *ppos += count; ++ err = -EFAULT; ++ } ++ ++ s1d15605_update(info); ++ ++ if (count) ++ return count; ++ ++ return err; ++} ++ ++#ifdef USE_PRIVATE_VMA_FXS ++static void s1d15605_vma_open(struct vm_area_struct *vma) ++{ ++ // FIXME - store stats in the device data via vm_private_data ++} ++ ++ ++static void s1d15605_vma_close(struct vm_area_struct *vma) ++{ ++ // FIXME - store stats in the device data via vm_private_data ++} ++ ++ ++static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma, ++ unsigned long address, int *type) ++{ ++ struct page *page; ++ struct fb_info *info = vma->vm_private_data; ++ ++ page = virt_to_page(info->screen_base); ++ get_page(page); ++ ++ // FIXME - now someone has a link to our page, start periodically blitting ++ // latest updates to the actual device. ++ ++ return page; ++} ++ ++ ++static struct vm_operations_struct s1d15605_vm_ops = { ++ .open = s1d15605_vma_open, ++ .close = s1d15605_vma_close, ++ .nopage = s1d15605_vma_nopage ++}; ++ ++ ++/* We don't do much here - because we have special vm_ops */ ++static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma) ++{ ++ vma->vm_ops = &s1d15605_vm_ops; ++ vma->vm_flags |= VM_RESERVED; ++ vma->vm_private_data = info; ++ s1d15605_vma_open(vma); ++ ++ return 0; ++} ++#endif /* USE_PRIVATE_VMA_FXS */ ++ ++ ++static struct fb_ops s1d15605fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = s1d15605_check_var, ++ .fb_set_par = s1d15605_set_par, ++ .fb_setcolreg = s1d15605_setcolreg, ++ .fb_blank = s1d15605_blank, ++// .fb_pan_display = s1d15605_pan_display, ++ .fb_fillrect = s1d15605_fillrect, ++ .fb_copyarea = s1d15605_copyarea, ++ .fb_imageblit = s1d15605_imageblit, ++ .fb_write = s1d15605_write, ++#ifdef USE_PRIVATE_VMA_FXS ++ .fb_mmap = s1d15605_mmap, ++#endif ++}; ++ ++ ++static void s1d15605_device_init(struct s1d15605fb_info *sinfo) { ++ ++ char value; ++ ++ /* release the reset line by reading the device - proto hardware */ ++ value = READ_COMMAND; ++ value = READ_COMMAND; ++ ++#ifdef CONFIG_MACH_KB9200 ++ /* new boards have dedicated reset line */ ++ gpio_set_value(sinfo->reset_pin, 1); ++#endif ++ ++ /* initialize the device within 5ms */ ++ WRITE_COMMAND(RESET_DISPLAY); ++ WRITE_COMMAND(LCD_BIAS_1_9); ++ WRITE_COMMAND(ADC_SELECT_REVERSE); ++ WRITE_COMMAND(COMMON_OUTPUT_NORMAL); ++ WRITE_COMMAND(V5_RESISTOR_RATIO); ++ WRITE_COMMAND(ELECTRONIC_VOLUME_SET); ++ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT); ++ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT); ++ WRITE_COMMAND(DISPLAY_ON); ++ ++ WRITE_COMMAND(RESISTOR_RATIO_START + 4); ++ WRITE_COMMAND(ELECTRONIC_VOLUME_SET); ++ WRITE_COMMAND(0x33); ++} ++ ++ ++static int s1d15605fb_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fb_info *info; ++ struct s1d15605fb_info *sinfo; ++ int ret; ++ ++ MSG("%s\n", __func__); ++ ++ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) { ++ dev_err(dev, "Cannot allocate framebuffer struct\n"); ++ return -ENOMEM; ++ } ++ ++ sinfo = info->par; ++ sinfo->info = info; ++ sinfo->pdev = pdev; ++ ++ if (pdev->num_resources < 2) { ++ dev_err(dev, "Resources unusable\n"); ++ ret = -ENODEV; ++ goto free_info; ++ } ++ ++ info->fbops = &s1d15605fb_ops; ++ strcpy(info->fix.id, pdev->name); ++ ++ info->fix.mmio_start = pdev->resource[0].start; ++ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1; ++ sinfo->reset_pin = pdev->resource[1].start; ++ ++ ret = s1d15605fb_resize_framebuffer(sinfo); ++ if (ret < 0) { ++ dev_err(dev, "Cannot resize framebuffer: %d\n", ret); ++ goto free_fb; ++ } ++ ++ if (!request_mem_region(info->fix.mmio_start, ++ info->fix.mmio_len, pdev->name)) { ++ ret = -EBUSY; ++ goto free_fb; ++ } ++ ++ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len); ++ if (!sinfo->mmio) { ++ dev_err(dev, "Cannot map LCD memory region\n"); ++ goto release_mem; ++ } ++ ++ s1d15605_device_init(sinfo); ++ ++ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1); ++ ++ if (!ret || (ret == 4)) ++ info->var = s1d15605_default; ++ ++ info->fix = s1d15605_fix; ++ info->flags = FBINFO_FLAG_DEFAULT | ++/* FBINFO_HWACCEL_YPAN | */ ++ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; ++ ++ ret = register_framebuffer(info); ++ if (ret < 0) { ++ dev_err(dev, "Failed to register framebuffer device: %d\n", ret); ++ goto unmap_mmio; ++ } ++ ++ dev_set_drvdata(dev, info); ++ ++ memset(info->screen_base, 0, info->fix.smem_len); ++ info->var.activate |= FB_ACTIVATE_NOW; ++ ret = fb_set_var(info, &info->var); ++ if (ret) { ++ dev_warn(dev, "Unable to set display parameters\n"); ++ } ++ ++ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW); ++ ++ dev_dbg(dev, "%s SUCCESS\n", __func__); ++ ++ dev_info(dev, "Driver $Revision: 1.1 $\n"); ++ ++ return 0; ++ ++unmap_mmio: ++ iounmap(sinfo->mmio); ++release_mem: ++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); ++free_fb: ++ kfree(info->screen_base); ++ ++free_info: ++ framebuffer_release(info); ++ ++ dev_dbg(dev, "%s FAILED\n", __func__); ++ return ret; ++} ++ ++ ++static int s1d15605fb_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fb_info *info = dev_get_drvdata(dev); ++ struct s1d15605fb_info *sinfo = info->par; ++ ++ if (!sinfo) ++ return 0; ++ ++ unregister_framebuffer(info); ++ ++ iounmap(sinfo->mmio); ++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); ++ ++ kfree(info->screen_base); ++ ++ dev_set_drvdata(dev, NULL); ++ framebuffer_release(info); ++ return 0; ++} ++ ++ ++static struct platform_driver s1d15605fb_driver = { ++ .probe = s1d15605fb_probe, ++ .remove = s1d15605fb_remove, ++ .driver = { ++ .name = "s1d15605fb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++ ++static int __init s1d15605fb_init(void) ++{ ++ return platform_driver_register(&s1d15605fb_driver); ++} ++ ++ ++static void __exit s1d15605fb_exit(void) ++{ ++ platform_driver_unregister(&s1d15605fb_driver); ++} ++ ++ ++module_init(s1d15605fb_init); ++module_exit(s1d15605fb_exit); ++ ++ ++MODULE_AUTHOR("KwikByte"); ++MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver"); ++MODULE_LICENSE("GPL"); +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_adc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_adc.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91_adc.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91_adc.h Tue May 8 12:13:31 2007 +@@ -0,0 +1,61 @@ ++/* ++ * include/asm-arm/arch-at91/at91_adc.h ++ * ++ * Copyright (C) SAN People ++ * ++ * Analog-to-Digital Converter (ADC) registers. ++ * Based on AT91SAM9260 datasheet revision D. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef AT91_ADC_H ++#define AT91_ADC_H ++ ++#define AT91_ADC_CR 0x00 /* Control Register */ ++#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ ++#define AT91_ADC_START (1 << 1) /* Start Conversion */ ++ ++#define AT91_ADC_MR 0x04 /* Mode Register */ ++#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ ++#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ ++#define AT91_ADC_TRGSEL_TC0 (0 << 1) ++#define AT91_ADC_TRGSEL_TC1 (1 << 1) ++#define AT91_ADC_TRGSEL_TC2 (2 << 1) ++#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) ++#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ ++#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ ++#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ ++#define AT91_ADC_PRESCAL_(x) ((x) << 8) ++#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ ++#define AT91_ADC_STARTUP_(x) ((x) << 16) ++#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ ++#define AT91_ADC_SHTIM_(x) ((x) << 24) ++ ++#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ ++#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ ++#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ ++#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ ++ ++#define AT91_ADC_SR 0x1C /* Status Register */ ++#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ ++#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ ++#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ ++#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ ++#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ ++#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ ++ ++#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ ++#define AT91_ADC_LDATA (0x3ff) ++ ++#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ ++#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ ++#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ ++ ++#define AT91_ADC_CHR(n) (0x30 + ((n) * 4) /* Channel Data Register N */ ++#define AT91_ADC_DATA (0x3ff) ++ ++#endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_mci.h linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91_mci.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h Tue May 8 12:13:31 2007 +@@ -26,6 +26,9 @@ + #define AT91_MCI_MR 0x04 /* Mode Register */ + #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ + #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ ++#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ ++#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ ++#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ + #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ + #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ + #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_pmc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91_pmc.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h Fri May 11 16:45:00 2007 +@@ -37,7 +37,9 @@ + #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ + #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ + +-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */ ++#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL only] */ ++ ++#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ + #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ + #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ + #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91rm9200.h linux-2.6-stable/include/asm-arm/arch-at91/at91rm9200.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91rm9200.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91rm9200.h Tue May 8 12:56:33 2007 +@@ -107,185 +107,4 @@ + #define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ + + +-#if 0 +-/* +- * PIO pin definitions (peripheral A/B multiplexing). +- */ +-#define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */ +-#define AT91_PA0_PCK3 (1 << 0) /* B: PMC Programmable Clock Output 3 */ +-#define AT91_PA1_MOSI (1 << 1) /* A: SPI Master-Out Slave-In */ +-#define AT91_PA1_PCK0 (1 << 1) /* B: PMC Programmable Clock Output 0 */ +-#define AT91_PA2_SPCK (1 << 2) /* A: SPI Serial Clock */ +-#define AT91_PA2_IRQ4 (1 << 2) /* B: External Interrupt 4 */ +-#define AT91_PA3_NPCS0 (1 << 3) /* A: SPI Peripheral Chip Select 0 */ +-#define AT91_PA3_IRQ5 (1 << 3) /* B: External Interrupt 5 */ +-#define AT91_PA4_NPCS1 (1 << 4) /* A: SPI Peripheral Chip Select 1 */ +-#define AT91_PA4_PCK1 (1 << 4) /* B: PMC Programmable Clock Output 1 */ +-#define AT91_PA5_NPCS2 (1 << 5) /* A: SPI Peripheral Chip Select 2 */ +-#define AT91_PA5_TXD3 (1 << 5) /* B: USART Transmit Data 3 */ +-#define AT91_PA6_NPCS3 (1 << 6) /* A: SPI Peripheral Chip Select 3 */ +-#define AT91_PA6_RXD3 (1 << 6) /* B: USART Receive Data 3 */ +-#define AT91_PA7_ETXCK_EREFCK (1 << 7) /* A: Ethernet Reference Clock / Transmit Clock */ +-#define AT91_PA7_PCK2 (1 << 7) /* B: PMC Programmable Clock Output 2 */ +-#define AT91_PA8_ETXEN (1 << 8) /* A: Ethernet Transmit Enable */ +-#define AT91_PA8_MCCDB (1 << 8) /* B: MMC Multimedia Card B Command */ +-#define AT91_PA9_ETX0 (1 << 9) /* A: Ethernet Transmit Data 0 */ +-#define AT91_PA9_MCDB0 (1 << 9) /* B: MMC Multimedia Card B Data 0 */ +-#define AT91_PA10_ETX1 (1 << 10) /* A: Ethernet Transmit Data 1 */ +-#define AT91_PA10_MCDB1 (1 << 10) /* B: MMC Multimedia Card B Data 1 */ +-#define AT91_PA11_ECRS_ECRSDV (1 << 11) /* A: Ethernet Carrier Sense / Data Valid */ +-#define AT91_PA11_MCDB2 (1 << 11) /* B: MMC Multimedia Card B Data 2 */ +-#define AT91_PA12_ERX0 (1 << 12) /* A: Ethernet Receive Data 0 */ +-#define AT91_PA12_MCDB3 (1 << 12) /* B: MMC Multimedia Card B Data 3 */ +-#define AT91_PA13_ERX1 (1 << 13) /* A: Ethernet Receive Data 1 */ +-#define AT91_PA13_TCLK0 (1 << 13) /* B: TC External Clock Input 0 */ +-#define AT91_PA14_ERXER (1 << 14) /* A: Ethernet Receive Error */ +-#define AT91_PA14_TCLK1 (1 << 14) /* B: TC External Clock Input 1 */ +-#define AT91_PA15_EMDC (1 << 15) /* A: Ethernet Management Data Clock */ +-#define AT91_PA15_TCLK2 (1 << 15) /* B: TC External Clock Input 2 */ +-#define AT91_PA16_EMDIO (1 << 16) /* A: Ethernet Management Data I/O */ +-#define AT91_PA16_IRQ6 (1 << 16) /* B: External Interrupt 6 */ +-#define AT91_PA17_TXD0 (1 << 17) /* A: USART Transmit Data 0 */ +-#define AT91_PA17_TIOA0 (1 << 17) /* B: TC I/O Line A 0 */ +-#define AT91_PA18_RXD0 (1 << 18) /* A: USART Receive Data 0 */ +-#define AT91_PA18_TIOB0 (1 << 18) /* B: TC I/O Line B 0 */ +-#define AT91_PA19_SCK0 (1 << 19) /* A: USART Serial Clock 0 */ +-#define AT91_PA19_TIOA1 (1 << 19) /* B: TC I/O Line A 1 */ +-#define AT91_PA20_CTS0 (1 << 20) /* A: USART Clear To Send 0 */ +-#define AT91_PA20_TIOB1 (1 << 20) /* B: TC I/O Line B 1 */ +-#define AT91_PA21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ +-#define AT91_PA21_TIOA2 (1 << 21) /* B: TC I/O Line A 2 */ +-#define AT91_PA22_RXD2 (1 << 22) /* A: USART Receive Data 2 */ +-#define AT91_PA22_TIOB2 (1 << 22) /* B: TC I/O Line B 2 */ +-#define AT91_PA23_TXD2 (1 << 23) /* A: USART Transmit Data 2 */ +-#define AT91_PA23_IRQ3 (1 << 23) /* B: External Interrupt 3 */ +-#define AT91_PA24_SCK2 (1 << 24) /* A: USART Serial Clock 2 */ +-#define AT91_PA24_PCK1 (1 << 24) /* B: PMC Programmable Clock Output 1 */ +-#define AT91_PA25_TWD (1 << 25) /* A: TWI Two-wire Serial Data */ +-#define AT91_PA25_IRQ2 (1 << 25) /* B: External Interrupt 2 */ +-#define AT91_PA26_TWCK (1 << 26) /* A: TWI Two-wire Serial Clock */ +-#define AT91_PA26_IRQ1 (1 << 26) /* B: External Interrupt 1 */ +-#define AT91_PA27_MCCK (1 << 27) /* A: MMC Multimedia Card Clock */ +-#define AT91_PA27_TCLK3 (1 << 27) /* B: TC External Clock Input 3 */ +-#define AT91_PA28_MCCDA (1 << 28) /* A: MMC Multimedia Card A Command */ +-#define AT91_PA28_TCLK4 (1 << 28) /* B: TC External Clock Input 4 */ +-#define AT91_PA29_MCDA0 (1 << 29) /* A: MMC Multimedia Card A Data 0 */ +-#define AT91_PA29_TCLK5 (1 << 29) /* B: TC External Clock Input 5 */ +-#define AT91_PA30_DRXD (1 << 30) /* A: DBGU Receive Data */ +-#define AT91_PA30_CTS2 (1 << 30) /* B: USART Clear To Send 2 */ +-#define AT91_PA31_DTXD (1 << 31) /* A: DBGU Transmit Data */ +-#define AT91_PA31_RTS2 (1 << 31) /* B: USART Ready To Send 2 */ +- +-#define AT91_PB0_TF0 (1 << 0) /* A: SSC Transmit Frame Sync 0 */ +-#define AT91_PB0_RTS3 (1 << 0) /* B: USART Ready To Send 3 */ +-#define AT91_PB1_TK0 (1 << 1) /* A: SSC Transmit Clock 0 */ +-#define AT91_PB1_CTS3 (1 << 1) /* B: USART Clear To Send 3 */ +-#define AT91_PB2_TD0 (1 << 2) /* A: SSC Transmit Data 0 */ +-#define AT91_PB2_SCK3 (1 << 2) /* B: USART Serial Clock 3 */ +-#define AT91_PB3_RD0 (1 << 3) /* A: SSC Receive Data 0 */ +-#define AT91_PB3_MCDA1 (1 << 3) /* B: MMC Multimedia Card A Data 1 */ +-#define AT91_PB4_RK0 (1 << 4) /* A: SSC Receive Clock 0 */ +-#define AT91_PB4_MCDA2 (1 << 4) /* B: MMC Multimedia Card A Data 2 */ +-#define AT91_PB5_RF0 (1 << 5) /* A: SSC Receive Frame Sync 0 */ +-#define AT91_PB5_MCDA3 (1 << 5) /* B: MMC Multimedia Card A Data 3 */ +-#define AT91_PB6_TF1 (1 << 6) /* A: SSC Transmit Frame Sync 1 */ +-#define AT91_PB6_TIOA3 (1 << 6) /* B: TC I/O Line A 3 */ +-#define AT91_PB7_TK1 (1 << 7) /* A: SSC Transmit Clock 1 */ +-#define AT91_PB7_TIOB3 (1 << 7) /* B: TC I/O Line B 3 */ +-#define AT91_PB8_TD1 (1 << 8) /* A: SSC Transmit Data 1 */ +-#define AT91_PB8_TIOA4 (1 << 8) /* B: TC I/O Line A 4 */ +-#define AT91_PB9_RD1 (1 << 9) /* A: SSC Receive Data 1 */ +-#define AT91_PB9_TIOB4 (1 << 9) /* B: TC I/O Line B 4 */ +-#define AT91_PB10_RK1 (1 << 10) /* A: SSC Receive Clock 1 */ +-#define AT91_PB10_TIOA5 (1 << 10) /* B: TC I/O Line A 5 */ +-#define AT91_PB11_RF1 (1 << 11) /* A: SSC Receive Frame Sync 1 */ +-#define AT91_PB11_TIOB5 (1 << 11) /* B: TC I/O Line B 5 */ +-#define AT91_PB12_TF2 (1 << 12) /* A: SSC Transmit Frame Sync 2 */ +-#define AT91_PB12_ETX2 (1 << 12) /* B: Ethernet Transmit Data 2 */ +-#define AT91_PB13_TK2 (1 << 13) /* A: SSC Transmit Clock 3 */ +-#define AT91_PB13_ETX3 (1 << 13) /* B: Ethernet Transmit Data 3 */ +-#define AT91_PB14_TD2 (1 << 14) /* A: SSC Transmit Data 2 */ +-#define AT91_PB14_ETXER (1 << 14) /* B: Ethernet Transmit Coding Error */ +-#define AT91_PB15_RD2 (1 << 15) /* A: SSC Receive Data 2 */ +-#define AT91_PB15_ERX2 (1 << 15) /* B: Ethernet Receive Data 2 */ +-#define AT91_PB16_RK2 (1 << 16) /* A: SSC Receive Clock 2 */ +-#define AT91_PB16_ERX3 (1 << 16) /* B: Ethernet Receive Data 3 */ +-#define AT91_PB17_RF2 (1 << 17) /* A: SSC Receive Frame Sync 2 */ +-#define AT91_PB17_ERXDV (1 << 17) /* B: Ethernet Receive Data Valid */ +-#define AT91_PB18_RI1 (1 << 18) /* A: USART Ring Indicator 1 */ +-#define AT91_PB18_ECOL (1 << 18) /* B: Ethernet Collision Detected */ +-#define AT91_PB19_DTR1 (1 << 19) /* A: USART Data Terminal Ready 1 */ +-#define AT91_PB19_ERXCK (1 << 19) /* B: Ethernet Receive Clock */ +-#define AT91_PB20_TXD1 (1 << 20) /* A: USART Transmit Data 1 */ +-#define AT91_PB21_RXD1 (1 << 21) /* A: USART Receive Data 1 */ +-#define AT91_PB22_SCK1 (1 << 22) /* A: USART Serial Clock 1 */ +-#define AT91_PB23_DCD1 (1 << 23) /* A: USART Data Carrier Detect 1 */ +-#define AT91_PB24_CTS1 (1 << 24) /* A: USART Clear To Send 1 */ +-#define AT91_PB25_DSR1 (1 << 25) /* A: USART Data Set Ready 1 */ +-#define AT91_PB25_EF100 (1 << 25) /* B: Ethernet Force 100 Mbit */ +-#define AT91_PB26_RTS1 (1 << 26) /* A: USART Ready To Send 1 */ +-#define AT91_PB27_PCK0 (1 << 27) /* B: PMC Programmable Clock Output 0 */ +-#define AT91_PB28_FIQ (1 << 28) /* A: Fast Interrupt */ +-#define AT91_PB29_IRQ0 (1 << 29) /* A: External Interrupt 0 */ +- +-#define AT91_PC0_BFCK (1 << 0) /* A: Burst Flash Clock */ +-#define AT91_PC1_BFRDY_SMOE (1 << 1) /* A: Burst Flash Ready / SmartMedia Output Enable */ +-#define AT91_PC2_BFAVD (1 << 2) /* A: Burst Flash Address Valid */ +-#define AT91_PC3_BFBAA_SMWE (1 << 3) /* A: Burst Flash Address Advance / SmartMedia Write Enable */ +-#define AT91_PC4_BFOE (1 << 4) /* A: Burst Flash Output Enable */ +-#define AT91_PC5_BFWE (1 << 5) /* A: Burst Flash Write Enable */ +-#define AT91_PC6_NWAIT (1 << 6) /* A: SMC Wait Signal */ +-#define AT91_PC7_A23 (1 << 7) /* A: Address Bus 23 */ +-#define AT91_PC8_A24 (1 << 8) /* A: Address Bus 24 */ +-#define AT91_PC9_A25_CFRNW (1 << 9) /* A: Address Bus 25 / Compact Flash Read Not Write */ +-#define AT91_PC10_NCS4_CFCS (1 << 10) /* A: SMC Chip Select 4 / Compact Flash Chip Select */ +-#define AT91_PC11_NCS5_CFCE1 (1 << 11) /* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */ +-#define AT91_PC12_NCS6_CFCE2 (1 << 12) /* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */ +-#define AT91_PC13_NCS7 (1 << 13) /* A: Chip Select 7 */ +- +-#define AT91_PD0_ETX0 (1 << 0) /* A: Ethernet Transmit Data 0 */ +-#define AT91_PD1_ETX1 (1 << 1) /* A: Ethernet Transmit Data 1 */ +-#define AT91_PD2_ETX2 (1 << 2) /* A: Ethernet Transmit Data 2 */ +-#define AT91_PD3_ETX3 (1 << 3) /* A: Ethernet Transmit Data 3 */ +-#define AT91_PD4_ETXEN (1 << 4) /* A: Ethernet Transmit Enable */ +-#define AT91_PD5_ETXER (1 << 5) /* A: Ethernet Transmit Coding Error */ +-#define AT91_PD6_DTXD (1 << 6) /* A: DBGU Transmit Data */ +-#define AT91_PD7_PCK0 (1 << 7) /* A: PMC Programmable Clock Output 0 */ +-#define AT91_PD7_TSYNC (1 << 7) /* B: ETM Trace Synchronization Signal */ +-#define AT91_PD8_PCK1 (1 << 8) /* A: PMC Programmable Clock Output 1 */ +-#define AT91_PD8_TCLK (1 << 8) /* B: ETM Trace Clock */ +-#define AT91_PD9_PCK2 (1 << 9) /* A: PMC Programmable Clock Output 2 */ +-#define AT91_PD9_TPS0 (1 << 9) /* B: ETM Trace ARM Pipeline Status 0 */ +-#define AT91_PD10_PCK3 (1 << 10) /* A: PMC Programmable Clock Output 3 */ +-#define AT91_PD10_TPS1 (1 << 10) /* B: ETM Trace ARM Pipeline Status 1 */ +-#define AT91_PD11_TPS2 (1 << 11) /* B: ETM Trace ARM Pipeline Status 2 */ +-#define AT91_PD12_TPK0 (1 << 12) /* B: ETM Trace Packet Port 0 */ +-#define AT91_PD13_TPK1 (1 << 13) /* B: ETM Trace Packet Port 1 */ +-#define AT91_PD14_TPK2 (1 << 14) /* B: ETM Trace Packet Port 2 */ +-#define AT91_PD15_TD0 (1 << 15) /* A: SSC Transmit Data 0 */ +-#define AT91_PD15_TPK3 (1 << 15) /* B: ETM Trace Packet Port 3 */ +-#define AT91_PD16_TD1 (1 << 16) /* A: SSC Transmit Data 1 */ +-#define AT91_PD16_TPK4 (1 << 16) /* B: ETM Trace Packet Port 4 */ +-#define AT91_PD17_TD2 (1 << 17) /* A: SSC Transmit Data 2 */ +-#define AT91_PD17_TPK5 (1 << 17) /* B: ETM Trace Packet Port 5 */ +-#define AT91_PD18_NPCS1 (1 << 18) /* A: SPI Peripheral Chip Select 1 */ +-#define AT91_PD18_TPK6 (1 << 18) /* B: ETM Trace Packet Port 6 */ +-#define AT91_PD19_NPCS2 (1 << 19) /* A: SPI Peripheral Chip Select 2 */ +-#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */ +-#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */ +-#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */ +-#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ +-#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */ +-#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */ +-#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */ +-#define AT91_PD23_RTS2 (1 << 23) /* A: USART Ready To Send 2 */ +-#define AT91_PD23_TPK11 (1 << 23) /* B: ETM Trace Packet Port 11 */ +-#define AT91_PD24_RTS3 (1 << 24) /* A: USART Ready To Send 3 */ +-#define AT91_PD24_TPK12 (1 << 24) /* B: ETM Trace Packet Port 12 */ +-#define AT91_PD25_DTR1 (1 << 25) /* A: USART Data Terminal Ready 1 */ +-#define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */ +-#define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */ +-#define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */ +-#endif +- + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9260.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91sam9260.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260.h Tue May 8 12:56:33 2007 +@@ -117,13 +117,4 @@ + #define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ + + +-#if 0 +-/* +- * PIO pin definitions (peripheral A/B multiplexing). +- */ +- +-// TODO: Add +- +-#endif +- + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91sam9260_matrix.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h Fri May 11 16:20:33 2007 +@@ -67,7 +67,7 @@ + #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ + #define AT91_MATRIX_CS4A_SMC (0 << 4) + #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +-#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */ ++#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ + #define AT91_MATRIX_CS5A_SMC (0 << 5) + #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) + #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9261.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9261.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91sam9261.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9261.h Tue May 8 12:56:33 2007 +@@ -98,195 +98,4 @@ + #define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */ + + +-#if 0 +-/* +- * PIO pin definitions (peripheral A/B multiplexing). +- */ +-#define AT91_PA0_SPI0_MISO (1 << 0) /* A: SPI0 Master In Slave */ +-#define AT91_PA0_MCDA0 (1 << 0) /* B: Multimedia Card A Data 0 */ +-#define AT91_PA1_SPI0_MOSI (1 << 1) /* A: SPI0 Master Out Slave */ +-#define AT91_PA1_MCCDA (1 << 1) /* B: Multimedia Card A Command */ +-#define AT91_PA2_SPI0_SPCK (1 << 2) /* A: SPI0 Serial Clock */ +-#define AT91_PA2_MCCK (1 << 2) /* B: Multimedia Card Clock */ +-#define AT91_PA3_SPI0_NPCS0 (1 << 3) /* A: SPI0 Peripheral Chip Select 0 */ +-#define AT91_PA4_SPI0_NPCS1 (1 << 4) /* A: SPI0 Peripheral Chip Select 1 */ +-#define AT91_PA4_MCDA1 (1 << 4) /* B: Multimedia Card A Data 1 */ +-#define AT91_PA5_SPI0_NPCS2 (1 << 5) /* A: SPI0 Peripheral Chip Select 2 */ +-#define AT91_PA5_MCDA2 (1 << 5) /* B: Multimedia Card A Data 2 */ +-#define AT91_PA6_SPI0_NPCS3 (1 << 6) /* A: SPI0 Peripheral Chip Select 3 */ +-#define AT91_PA6_MCDA3 (1 << 6) /* B: Multimedia Card A Data 3 */ +-#define AT91_PA7_TWD (1 << 7) /* A: TWI Two-wire Serial Data */ +-#define AT91_PA7_PCK0 (1 << 7) /* B: PMC Programmable clock Output 0 */ +-#define AT91_PA8_TWCK (1 << 8) /* A: TWI Two-wire Serial Clock */ +-#define AT91_PA8_PCK1 (1 << 8) /* B: PMC Programmable clock Output 1 */ +-#define AT91_PA9_DRXD (1 << 9) /* A: DBGU Debug Receive Data */ +-#define AT91_PA9_PCK2 (1 << 9) /* B: PMC Programmable clock Output 2 */ +-#define AT91_PA10_DTXD (1 << 10) /* A: DBGU Debug Transmit Data */ +-#define AT91_PA10_PCK3 (1 << 10) /* B: PMC Programmable clock Output 3 */ +-#define AT91_PA11_TSYNC (1 << 11) /* A: Trace Synchronization Signal */ +-#define AT91_PA11_SCK1 (1 << 11) /* B: USART1 Serial Clock */ +-#define AT91_PA12_TCLK (1 << 12) /* A: Trace Clock */ +-#define AT91_PA12_RTS1 (1 << 12) /* B: USART1 Ready To Send */ +-#define AT91_PA13_TPS0 (1 << 13) /* A: Trace ARM Pipeline Status 0 */ +-#define AT91_PA13_CTS1 (1 << 13) /* B: USART1 Clear To Send */ +-#define AT91_PA14_TPS1 (1 << 14) /* A: Trace ARM Pipeline Status 1 */ +-#define AT91_PA14_SCK2 (1 << 14) /* B: USART2 Serial Clock */ +-#define AT91_PA15_TPS2 (1 << 15) /* A: Trace ARM Pipeline Status 2 */ +-#define AT91_PA15_RTS2 (1 << 15) /* B: USART2 Ready To Send */ +-#define AT91_PA16_TPK0 (1 << 16) /* A: Trace Packet Port 0 */ +-#define AT91_PA16_CTS2 (1 << 16) /* B: USART2 Clear To Send */ +-#define AT91_PA17_TPK1 (1 << 17) /* A: Trace Packet Port 1 */ +-#define AT91_PA17_TF1 (1 << 17) /* B: SSC1 Transmit Frame Sync */ +-#define AT91_PA18_TPK2 (1 << 18) /* A: Trace Packet Port 2 */ +-#define AT91_PA18_TK1 (1 << 18) /* B: SSC1 Transmit Clock */ +-#define AT91_PA19_TPK3 (1 << 19) /* A: Trace Packet Port 3 */ +-#define AT91_PA19_TD1 (1 << 19) /* B: SSC1 Transmit Data */ +-#define AT91_PA20_TPK4 (1 << 20) /* A: Trace Packet Port 4 */ +-#define AT91_PA20_RD1 (1 << 20) /* B: SSC1 Receive Data */ +-#define AT91_PA21_TPK5 (1 << 21) /* A: Trace Packet Port 5 */ +-#define AT91_PA21_RK1 (1 << 21) /* B: SSC1 Receive Clock */ +-#define AT91_PA22_TPK6 (1 << 22) /* A: Trace Packet Port 6 */ +-#define AT91_PA22_RF1 (1 << 22) /* B: SSC1 Receive Frame Sync */ +-#define AT91_PA23_TPK7 (1 << 23) /* A: Trace Packet Port 7 */ +-#define AT91_PA23_RTS0 (1 << 23) /* B: USART0 Ready To Send */ +-#define AT91_PA24_TPK8 (1 << 24) /* A: Trace Packet Port 8 */ +-#define AT91_PA24_SPI1_NPCS1 (1 << 24) /* B: SPI1 Peripheral Chip Select 1 */ +-#define AT91_PA25_TPK9 (1 << 25) /* A: Trace Packet Port 9 */ +-#define AT91_PA25_SPI1_NPCS2 (1 << 25) /* B: SPI1 Peripheral Chip Select 2 */ +-#define AT91_PA26_TPK10 (1 << 26) /* A: Trace Packet Port 10 */ +-#define AT91_PA26_SPI1_NPCS3 (1 << 26) /* B: SPI1 Peripheral Chip Select 3 */ +-#define AT91_PA27_TPK11 (1 << 27) /* A: Trace Packet Port 11 */ +-#define AT91_PA27_SPI0_NPCS1 (1 << 27) /* B: SPI0 Peripheral Chip Select 1 */ +-#define AT91_PA28_TPK12 (1 << 28) /* A: Trace Packet Port 12 */ +-#define AT91_PA28_SPI0_NPCS2 (1 << 28) /* B: SPI0 Peripheral Chip Select 2 */ +-#define AT91_PA29_TPK13 (1 << 29) /* A: Trace Packet Port 13 */ +-#define AT91_PA29_SPI0_NPCS3 (1 << 29) /* B: SPI0 Peripheral Chip Select 3 */ +-#define AT91_PA30_TPK14 (1 << 30) /* A: Trace Packet Port 14 */ +-#define AT91_PA30_A23 (1 << 30) /* B: Address Bus bit 23 */ +-#define AT91_PA31_TPK15 (1 << 31) /* A: Trace Packet Port 15 */ +-#define AT91_PA31_A24 (1 << 31) /* B: Address Bus bit 24 */ +- +-#define AT91_PB0_LCDVSYNC (1 << 0) /* A: LCD Vertical Synchronization */ +-#define AT91_PB1_LCDHSYNC (1 << 1) /* A: LCD Horizontal Synchronization */ +-#define AT91_PB2_LCDDOTCK (1 << 2) /* A: LCD Dot Clock */ +-#define AT91_PB2_PCK0 (1 << 2) /* B: PMC Programmable clock Output 0 */ +-#define AT91_PB3_LCDDEN (1 << 3) /* A: LCD Data Enable */ +-#define AT91_PB4_LCDCC (1 << 4) /* A: LCD Contrast Control */ +-#define AT91_PB4_LCDD2 (1 << 4) /* B: LCD Data Bus Bit 2 */ +-#define AT91_PB5_LCDD0 (1 << 5) /* A: LCD Data Bus Bit 0 */ +-#define AT91_PB5_LCDD3 (1 << 5) /* B: LCD Data Bus Bit 3 */ +-#define AT91_PB6_LCDD1 (1 << 6) /* A: LCD Data Bus Bit 1 */ +-#define AT91_PB6_LCDD4 (1 << 6) /* B: LCD Data Bus Bit 4 */ +-#define AT91_PB7_LCDD2 (1 << 7) /* A: LCD Data Bus Bit 2 */ +-#define AT91_PB7_LCDD5 (1 << 7) /* B: LCD Data Bus Bit 5 */ +-#define AT91_PB8_LCDD3 (1 << 8) /* A: LCD Data Bus Bit 3 */ +-#define AT91_PB8_LCDD6 (1 << 8) /* B: LCD Data Bus Bit 6 */ +-#define AT91_PB9_LCDD4 (1 << 9) /* A: LCD Data Bus Bit 4 */ +-#define AT91_PB9_LCDD7 (1 << 9) /* B: LCD Data Bus Bit 7 */ +-#define AT91_PB10_LCDD5 (1 << 10) /* A: LCD Data Bus Bit 5 */ +-#define AT91_PB10_LCDD10 (1 << 10) /* B: LCD Data Bus Bit 10 */ +-#define AT91_PB11_LCDD6 (1 << 11) /* A: LCD Data Bus Bit 6 */ +-#define AT91_PB11_LCDD11 (1 << 11) /* B: LCD Data Bus Bit 11 */ +-#define AT91_PB12_LCDD7 (1 << 12) /* A: LCD Data Bus Bit 7 */ +-#define AT91_PB12_LCDD12 (1 << 12) /* B: LCD Data Bus Bit 12 */ +-#define AT91_PB13_LCDD8 (1 << 13) /* A: LCD Data Bus Bit 8 */ +-#define AT91_PB13_LCDD13 (1 << 13) /* B: LCD Data Bus Bit 13 */ +-#define AT91_PB14_LCDD9 (1 << 14) /* A: LCD Data Bus Bit 9 */ +-#define AT91_PB14_LCDD14 (1 << 14) /* B: LCD Data Bus Bit 14 */ +-#define AT91_PB15_LCDD10 (1 << 15) /* A: LCD Data Bus Bit 10 */ +-#define AT91_PB15_LCDD15 (1 << 15) /* B: LCD Data Bus Bit 15 */ +-#define AT91_PB16_LCDD11 (1 << 16) /* A: LCD Data Bus Bit 11 */ +-#define AT91_PB16_LCDD19 (1 << 16) /* B: LCD Data Bus Bit 19 */ +-#define AT91_PB17_LCDD12 (1 << 17) /* A: LCD Data Bus Bit 12 */ +-#define AT91_PB17_LCDD20 (1 << 17) /* B: LCD Data Bus Bit 20 */ +-#define AT91_PB18_LCDD13 (1 << 18) /* A: LCD Data Bus Bit 13 */ +-#define AT91_PB18_LCDD21 (1 << 18) /* B: LCD Data Bus Bit 21 */ +-#define AT91_PB19_LCDD14 (1 << 19) /* A: LCD Data Bus Bit 14 */ +-#define AT91_PB19_LCDD22 (1 << 19) /* B: LCD Data Bus Bit 22 */ +-#define AT91_PB20_LCDD15 (1 << 20) /* A: LCD Data Bus Bit 15 */ +-#define AT91_PB20_LCDD23 (1 << 20) /* B: LCD Data Bus Bit 23 */ +-#define AT91_PB21_TF0 (1 << 21) /* A: SSC0 Transmit Frame Sync */ +-#define AT91_PB21_LCDD16 (1 << 21) /* B: LCD Data Bus Bit 16 */ +-#define AT91_PB22_TK0 (1 << 22) /* A: SSC0 Transmit Clock */ +-#define AT91_PB22_LCDD17 (1 << 22) /* B: LCD Data Bus Bit 17 */ +-#define AT91_PB23_TD0 (1 << 23) /* A: SSC0 Transmit Data */ +-#define AT91_PB23_LCDD18 (1 << 23) /* B: LCD Data Bus Bit 18 */ +-#define AT91_PB24_RD0 (1 << 24) /* A: SSC0 Receive Data */ +-#define AT91_PB24_LCDD19 (1 << 24) /* B: LCD Data Bus Bit 19 */ +-#define AT91_PB25_RK0 (1 << 25) /* A: SSC0 Receive Clock */ +-#define AT91_PB25_LCDD20 (1 << 25) /* B: LCD Data Bus Bit 20 */ +-#define AT91_PB26_RF0 (1 << 26) /* A: SSC0 Receive Frame Sync */ +-#define AT91_PB26_LCDD21 (1 << 26) /* B: LCD Data Bus Bit 21 */ +-#define AT91_PB27_SPI1_NPCS1 (1 << 27) /* A: SPI1 Peripheral Chip Select 1 */ +-#define AT91_PB27_LCDD22 (1 << 27) /* B: LCD Data Bus Bit 22 */ +-#define AT91_PB28_SPI1_NPCS0 (1 << 28) /* A: SPI1 Peripheral Chip Select 0 */ +-#define AT91_PB28_LCDD23 (1 << 28) /* B: LCD Data Bus Bit 23 */ +-#define AT91_PB29_SPI1_SPCK (1 << 29) /* A: SPI1 Serial Clock */ +-#define AT91_PB29_IRQ2 (1 << 29) /* B: Interrupt input 2 */ +-#define AT91_PB30_SPI1_MISO (1 << 30) /* A: SPI1 Master In Slave */ +-#define AT91_PB30_IRQ1 (1 << 30) /* B: Interrupt input 1 */ +-#define AT91_PB31_SPI1_MOSI (1 << 31) /* A: SPI1 Master Out Slave */ +-#define AT91_PB31_PCK2 (1 << 31) /* B: PMC Programmable clock Output 2 */ +- +-#define AT91_PC0_SMOE (1 << 0) /* A: SmartMedia Output Enable */ +-#define AT91_PC0_NCS6 (1 << 0) /* B: Chip Select 6 */ +-#define AT91_PC1_SMWE (1 << 1) /* A: SmartMedia Write Enable */ +-#define AT91_PC1_NCS7 (1 << 1) /* B: Chip Select 7 */ +-#define AT91_PC2_NWAIT (1 << 2) /* A: NWAIT */ +-#define AT91_PC2_IRQ0 (1 << 2) /* B: Interrupt input 0 */ +-#define AT91_PC3_A25_CFRNW (1 << 3) /* A: Address Bus[25] / Compact Flash Read Not Write */ +-#define AT91_PC4_NCS4_CFCS0 (1 << 4) /* A: Chip Select 4 / CompactFlash Chip Select 0 */ +-#define AT91_PC5_NCS5_CFCS1 (1 << 5) /* A: Chip Select 5 / CompactFlash Chip Select 1 */ +-#define AT91_PC6_CFCE1 (1 << 6) /* A: CompactFlash Chip Enable 1 */ +-#define AT91_PC7_CFCE2 (1 << 7) /* A: CompactFlash Chip Enable 2 */ +-#define AT91_PC8_TXD0 (1 << 8) /* A: USART0 Transmit Data */ +-#define AT91_PC8_PCK2 (1 << 8) /* B: PMC Programmable clock Output 2 */ +-#define AT91_PC9_RXD0 (1 << 9) /* A: USART0 Receive Data */ +-#define AT91_PC9_PCK3 (1 << 9) /* B: PMC Programmable clock Output 3 */ +-#define AT91_PC10_RTS0 (1 << 10) /* A: USART0 Ready To Send */ +-#define AT91_PC10_SCK0 (1 << 10) /* B: USART0 Serial Clock */ +-#define AT91_PC11_CTS0 (1 << 11) /* A: USART0 Clear To Send */ +-#define AT91_PC11_FIQ (1 << 11) /* B: AIC Fast Interrupt Input */ +-#define AT91_PC12_TXD1 (1 << 12) /* A: USART1 Transmit Data */ +-#define AT91_PC12_NCS6 (1 << 12) /* B: Chip Select 6 */ +-#define AT91_PC13_RXD1 (1 << 13) /* A: USART1 Receive Data */ +-#define AT91_PC13_NCS7 (1 << 13) /* B: Chip Select 7 */ +-#define AT91_PC14_TXD2 (1 << 14) /* A: USART2 Transmit Data */ +-#define AT91_PC14_SPI1_NPCS2 (1 << 14) /* B: SPI1 Peripheral Chip Select 2 */ +-#define AT91_PC15_RXD2 (1 << 15) /* A: USART2 Receive Data */ +-#define AT91_PC15_SPI1_NPCS3 (1 << 15) /* B: SPI1 Peripheral Chip Select 3 */ +-#define AT91_PC16_D16 (1 << 16) /* A: Data Bus [16] */ +-#define AT91_PC16_TCLK0 (1 << 16) /* B: Timer Counter 0 external clock input */ +-#define AT91_PC17_D17 (1 << 17) /* A: Data Bus [17] */ +-#define AT91_PC17_TCLK1 (1 << 17) /* B: Timer Counter 1 external clock input */ +-#define AT91_PC18_D18 (1 << 18) /* A: Data Bus [18] */ +-#define AT91_PC18_TCLK2 (1 << 18) /* B: Timer Counter 2 external clock input */ +-#define AT91_PC19_D19 (1 << 19) /* A: Data Bus [19] */ +-#define AT91_PC19_TIOA0 (1 << 19) /* B: Timer Counter 0 Multipurpose Timer I/O Pin A */ +-#define AT91_PC20_D20 (1 << 20) /* A: Data Bus [20] */ +-#define AT91_PC20_TIOB0 (1 << 20) /* B: Timer Counter 0 Multipurpose Timer I/O Pin B */ +-#define AT91_PC21_D21 (1 << 21) /* A: Data Bus [21] */ +-#define AT91_PC21_TIOA1 (1 << 21) /* B: Timer Counter 1 Multipurpose Timer I/O Pin A */ +-#define AT91_PC22_D22 (1 << 22) /* A: Data Bus [22] */ +-#define AT91_PC22_TIOB1 (1 << 22) /* B: Timer Counter 1 Multipurpose Timer I/O Pin B */ +-#define AT91_PC23_D23 (1 << 23) /* A: Data Bus [23] */ +-#define AT91_PC23_TIOA2 (1 << 23) /* B: Timer Counter 2 Multipurpose Timer I/O Pin A */ +-#define AT91_PC24_D24 (1 << 24) /* A: Data Bus [24] */ +-#define AT91_PC24_TIOB2 (1 << 24) /* B: Timer Counter 2 Multipurpose Timer I/O Pin B */ +-#define AT91_PC25_D25 (1 << 25) /* A: Data Bus [25] */ +-#define AT91_PC25_TF2 (1 << 25) /* B: SSC2 Transmit Frame Sync */ +-#define AT91_PC26_D26 (1 << 26) /* A: Data Bus [26] */ +-#define AT91_PC26_TK2 (1 << 26) /* B: SSC2 Transmit Clock */ +-#define AT91_PC27_D27 (1 << 27) /* A: Data Bus [27] */ +-#define AT91_PC27_TD2 (1 << 27) /* B: SSC2 Transmit Data */ +-#define AT91_PC28_D28 (1 << 28) /* A: Data Bus [28] */ +-#define AT91_PC28_RD2 (1 << 28) /* B: SSC2 Receive Data */ +-#define AT91_PC29_D29 (1 << 29) /* A: Data Bus [29] */ +-#define AT91_PC29_RK2 (1 << 29) /* B: SSC2 Receive Clock */ +-#define AT91_PC30_D30 (1 << 30) /* A: Data Bus [30] */ +-#define AT91_PC30_RF2 (1 << 30) /* B: SSC2 Receive Frame Sync */ +-#define AT91_PC31_D31 (1 << 31) /* A: Data Bus [31] */ +-#define AT91_PC31_PCK1 (1 << 31) /* B: PMC Programmable clock Output 1 */ +-#endif +- + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9263.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9263.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91sam9263.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9263.h Tue May 8 12:56:33 2007 +@@ -119,13 +119,5 @@ + #define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */ + #define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */ + +-#if 0 +-/* +- * PIO pin definitions (peripheral A/B multiplexing). +- */ +- +-// TODO: Add +- +-#endif + + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl.h Fri May 11 14:53:48 2007 +@@ -0,0 +1,110 @@ ++/* ++ * include/asm-arm/arch-at91/at91sam9260.h ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * Common definitions. ++ * Based on AT91SAM9RL datasheet revision A. (Preliminary) ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ */ ++ ++#ifndef AT91SAM9RL_H ++#define AT91SAM9RL_H ++ ++/* ++ * Peripheral identifiers/interrupts. ++ */ ++#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ ++#define AT91_ID_SYS 1 /* System Controller */ ++#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ ++#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ ++#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ ++#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */ ++#define AT91SAM9RL_ID_US0 6 /* USART 0 */ ++#define AT91SAM9RL_ID_US1 7 /* USART 1 */ ++#define AT91SAM9RL_ID_US2 8 /* USART 2 */ ++#define AT91SAM9RL_ID_US3 9 /* USART 3 */ ++#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */ ++#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */ ++#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */ ++#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */ ++#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */ ++#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */ ++#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */ ++#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */ ++#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */ ++#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */ ++#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */ ++#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */ ++#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */ ++#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */ ++#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */ ++#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */ ++ ++ ++/* ++ * User Peripheral physical base addresses. ++ */ ++#define AT91SAM9RL_BASE_TCB0 0xfffa0000 ++#define AT91SAM9RL_BASE_TC0 0xfffa0000 ++#define AT91SAM9RL_BASE_TC1 0xfffa0040 ++#define AT91SAM9RL_BASE_TC2 0xfffa0080 ++#define AT91SAM9RL_BASE_MCI 0xfffa4000 ++#define AT91SAM9RL_BASE_TWI0 0xfffa8000 ++#define AT91SAM9RL_BASE_TWI1 0xfffac000 ++#define AT91SAM9RL_BASE_US0 0xfffb0000 ++#define AT91SAM9RL_BASE_US1 0xfffb4000 ++#define AT91SAM9RL_BASE_US2 0xfffb8000 ++#define AT91SAM9RL_BASE_US3 0xfffbc000 ++#define AT91SAM9RL_BASE_SSC0 0xfffc0000 ++#define AT91SAM9RL_BASE_SSC1 0xfffc4000 ++#define AT91SAM9RL_BASE_PWMC 0xfffc8000 ++#define AT91SAM9RL_BASE_SPI 0xfffcc000 ++#define AT91SAM9RL_BASE_TSC 0xfffd0000 ++#define AT91SAM9RL_BASE_UDPHS 0xfffd4000 ++#define AT91SAM9RL_BASE_AC97C 0xfffd8000 ++#define AT91_BASE_SYS 0xffffc000 ++ ++ ++/* ++ * System Peripherals (offset from AT91_BASE_SYS) ++ */ ++#define AT91_DMA (0xffffe600 - AT91_BASE_SYS) ++#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) ++#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) ++#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) ++#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) ++#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) ++#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) ++#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) ++#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) ++#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) ++#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) ++#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) ++#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) ++#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) ++#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) ++#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) ++#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) ++#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) ++#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) ++#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) ++#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) ++ ++ ++/* ++ * Internal Memory. ++ */ ++#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */ ++#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ ++ ++#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */ ++#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ ++ ++#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */ ++#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */ ++ ++#endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl_matrix.h +--- linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl_matrix.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl_matrix.h Fri May 11 16:18:45 2007 +@@ -0,0 +1,96 @@ ++/* ++ * include/asm-arm/arch-at91/at91sam9rl_matrix.h ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * Memory Controllers (MATRIX, EBI) - System peripherals registers. ++ * Based on AT91SAM9RL datasheet revision A. (Preliminary) ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ */ ++ ++#ifndef AT91SAM9RL_MATRIX_H ++#define AT91SAM9RL_MATRIX_H ++ ++#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ ++#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ ++#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ ++#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ ++#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ ++#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ ++#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ ++#define AT91_MATRIX_ULBT_INFINITE (0 << 0) ++#define AT91_MATRIX_ULBT_SINGLE (1 << 0) ++#define AT91_MATRIX_ULBT_FOUR (2 << 0) ++#define AT91_MATRIX_ULBT_EIGHT (3 << 0) ++#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) ++ ++#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ ++#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ ++#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ ++#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ ++#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ ++#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ ++#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ ++#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ ++#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) ++#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) ++#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) ++#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ ++#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ ++#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) ++#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) ++ ++#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ ++#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ ++#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ ++#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ ++#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ ++#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ ++#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ ++#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ ++#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ ++#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ ++#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ ++#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ ++ ++#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ ++#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ ++#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ ++#define AT91_MATRIX_RCB2 (1 << 2) ++#define AT91_MATRIX_RCB3 (1 << 3) ++#define AT91_MATRIX_RCB4 (1 << 4) ++#define AT91_MATRIX_RCB5 (1 << 5) ++ ++#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ ++#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ ++#define AT91_MATRIX_ITCM_0 (0 << 0) ++#define AT91_MATRIX_ITCM_16 (5 << 0) ++#define AT91_MATRIX_ITCM_32 (6 << 0) ++#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ ++#define AT91_MATRIX_DTCM_0 (0 << 4) ++#define AT91_MATRIX_DTCM_16 (5 << 4) ++#define AT91_MATRIX_DTCM_32 (6 << 4) ++ ++#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ ++#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ ++#define AT91_MATRIX_CS1A_SMC (0 << 1) ++#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) ++#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ ++#define AT91_MATRIX_CS3A_SMC (0 << 3) ++#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) ++#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ ++#define AT91_MATRIX_CS4A_SMC (0 << 4) ++#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) ++#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ ++#define AT91_MATRIX_CS5A_SMC (0 << 5) ++#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) ++#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ ++#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ ++#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) ++#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) ++ ++ ++#endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/board.h linux-2.6-stable/include/asm-arm/arch-at91/board.h +--- linux-2.6.21/include/asm-arm/arch-at91/board.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/board.h Thu May 10 12:21:10 2007 +@@ -62,7 +62,7 @@ + }; + extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); + +- /* Ethernet */ ++ /* Ethernet (EMAC & MACB) */ + struct at91_eth_data { + u8 phy_irq_pin; /* PHY IRQ */ + u8 is_rmii; /* using RMII interface? */ +@@ -114,9 +114,31 @@ + }; + extern void __init at91_add_device_serial(void); + ++ /* LCD Controller */ ++struct atmel_lcdfb_info; ++extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); ++ ++ /* AC97 */ ++struct atmel_ac97_data { ++ u8 reset_pin; /* reset */ ++}; ++extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); ++ ++ /* ISI */ ++extern void __init at91_add_device_isi(void); ++ + /* LEDs */ + extern u8 at91_leds_cpu; + extern u8 at91_leds_timer; + extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); + ++struct at91_gpio_led { ++ u8 index; /* index of LED */ ++ char* name; /* name of LED */ ++ u8 gpio; /* AT91_PIN_xx */ ++ u8 flags; /* 1=active-high */ ++ char* trigger; /* default trigger */ ++}; ++extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr); ++ + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/cpu.h linux-2.6-stable/include/asm-arm/arch-at91/cpu.h +--- linux-2.6.21/include/asm-arm/arch-at91/cpu.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/cpu.h Wed May 9 10:20:54 2007 +@@ -26,6 +26,8 @@ + #define ARCH_ID_AT91SAM9XE256 0x329a93a0 + #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 + ++#define ARCH_ID_AT91SAM9RL64 0x019b03a0 ++ + static inline unsigned long at91_cpu_identify(void) + { + return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); +@@ -68,4 +70,10 @@ + #define cpu_is_at91sam9263() (0) + #endif + ++#ifdef CONFIG_ARCH_AT91SAM9RL ++#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64) ++#else ++#define cpu_is_at91sam9rl() (0) ++#endif ++ + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/hardware.h linux-2.6-stable/include/asm-arm/arch-at91/hardware.h +--- linux-2.6.21/include/asm-arm/arch-at91/hardware.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/hardware.h Fri May 11 14:45:12 2007 +@@ -24,6 +24,8 @@ + #include <asm/arch/at91sam9261.h> + #elif defined(CONFIG_ARCH_AT91SAM9263) + #include <asm/arch/at91sam9263.h> ++#elif defined(CONFIG_ARCH_AT91SAM9RL) ++#include <asm/arch/at91sam9rl.h> + #else + #error "Unsupported AT91 processor" + #endif +@@ -69,22 +71,5 @@ + /* Clocks */ + #define AT91_SLOW_CLOCK 32768 /* slow clock */ + +-#ifndef __ASSEMBLY__ +-#include <asm/io.h> +- +-static inline unsigned int at91_sys_read(unsigned int reg_offset) +-{ +- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; +- +- return __raw_readl(addr + reg_offset); +-} +- +-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) +-{ +- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; +- +- __raw_writel(value, addr + reg_offset); +-} +-#endif + + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/ics1523.h linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h +--- linux-2.6.21/include/asm-arm/arch-at91/ics1523.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h Tue May 8 12:13:31 2007 +@@ -0,0 +1,154 @@ ++//*---------------------------------------------------------------------------- ++//* ATMEL Microcontroller Software Support - ROUSSET - ++//*---------------------------------------------------------------------------- ++//* The software is delivered "AS IS" without warranty or condition of any ++//* kind, either express, implied or statutory. This includes without ++//* limitation any warranty or condition with respect to merchantability or ++//* fitness for any particular purpose, or against the infringements of ++//* intellectual property rights of others. ++//*---------------------------------------------------------------------------- ++//* File Name : ics1523.h ++//* Object : Clock Generator Prototyping File. ++//* ++//* 1.0 08/28/02 ED : Creation ++//* 1.2 13/01/03 FB : Update on lib V3 ++//*---------------------------------------------------------------------------- ++ ++#ifndef ics1523_h ++#define ics1523_h ++ ++/*-------------------------------------------*/ ++/* ICS1523 TWI Serial Clock Definition */ ++/*-------------------------------------------*/ ++ ++#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */ ++#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */ ++#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */ ++ ++#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */ ++#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */ ++ ++/*-------------------------------------------*/ ++/* ICS1523 Write Operation Definition */ ++/*-------------------------------------------*/ ++ ++#define ICS1523_ACCESS_OK 0 /* OK */ ++#define ICS1523_ACCESS_ERROR -1 /* NOK */ ++ ++/*-------------------------------------------*/ ++/* ICS1523 Device Addresses Definition */ ++/*-------------------------------------------*/ ++ ++#define ICS_ADDR 0x26 /* Device Address */ ++ ++/*--------------------------------------------------*/ ++/* ICS1523 Registers Internal Addresses Definition */ ++/*--------------------------------------------------*/ ++ ++#define ICS_ICR 0x0 /* Input Control Register */ ++#define ICS_LCR 0x1 /* Loop Control Register */ ++#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */ ++#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */ ++#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */ ++#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */ ++#define ICS_OE 0x6 /* Output Enables Register */ ++#define ICS_OD 0x7 /* Osc Divider Register */ ++#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */ ++#define ICS_VID 0x10 /* Chip Version Register */ ++#define ICS_RID 0x11 /* Chip Revision Register */ ++#define ICS_SR 0x12 /* Status Register */ ++ ++/*------------------------------------------------------*/ ++/* ICS1523 Input Control Register Bits Definition */ ++/*------------------------------------------------------*/ ++ ++#define ICS_PDEN 0x1 /* Phase Detector Enable */ ++#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */ ++#define ICS_REFPOL 0x4 /* External Reference Polarity */ ++#define ICS_FBKPOL 0x8 /* External Feedback Polarity */ ++#define ICS_FBKSEL 0x10 /* External Feedback Select */ ++#define ICS_FUNCSEL 0x20 /* Function Out Select */ ++#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */ ++#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */ ++ ++/*-----------------------------------------------------*/ ++/* ICS1523 Loop Control Register Bits Definition */ ++/*-----------------------------------------------------*/ ++ ++#define ICS_PFD 0x7 /* Phase Detector Gain */ ++#define ICS_PSD 0x30 /* Post-Scaler Divider */ ++ ++/*----------------------------------------------------*/ ++/* ICS1523 PLL FeedBack Divider LSBs Definition */ ++/*----------------------------------------------------*/ ++ ++#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */ ++ ++/*----------------------------------------------------*/ ++/* ICS1523 PLL FeedBack Divider MSBs Definition */ ++/*----------------------------------------------------*/ ++ ++#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */ ++ ++/*------------------------------------------------------------*/ ++/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */ ++/*------------------------------------------------------------*/ ++ ++#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */ ++#define ICS_FILSEL 0x80 /* Loop Filter Select */ ++ ++/*----------------------------------------------------------------*/ ++/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */ ++/*----------------------------------------------------------------*/ ++ ++#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */ ++#define ICS_MMREV 0xFC /* Metal Mask Revision Number */ ++ ++/*-------------------------------------------------------*/ ++/* ICS1523 Output Enables Register Bits Definition */ ++/*-------------------------------------------------------*/ ++ ++#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */ ++#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */ ++#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */ ++#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */ ++#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */ ++#define ICS_CLK2INV 0x20 /* CLK/2 Invert */ ++#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */ ++ ++/*----------------------------------------------------*/ ++/* ICS1523 Osc Divider Register Bits Definition */ ++/*----------------------------------------------------*/ ++ ++#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */ ++#define ICS_INSEL 0x80 /* Input Select */ ++ ++/*---------------------------------------------------*/ ++/* ICS1523 DPA & PLL Reset Register Definition */ ++/*---------------------------------------------------*/ ++ ++#define ICS_DPAR 0x0A /* DPA Reset Command */ ++#define ICS_PLLR 0x50 /* PLL Reset Command */ ++ ++/*------------------------------------------------*/ ++/* ICS1523 Chip Version Register Definition */ ++/*------------------------------------------------*/ ++ ++#define ICS_CHIPV 0xFF /* Chip Version */ ++ ++/*-------------------------------------------------*/ ++/* ICS1523 Chip Revision Register Definition */ ++/*-------------------------------------------------*/ ++ ++#define ICS_CHIPR 0xFF /* Chip Revision */ ++ ++/*------------------------------------------*/ ++/* ICS1523 Status Register Definition */ ++/*------------------------------------------*/ ++ ++#define ICS_DPALOCK 0x1 /* DPA Lock Status */ ++#define ICS_PLLLOCK 0x2 /* PLL Lock Status */ ++ ++int at91_ics1523_init(void); ++ ++#endif /* ics1523_h */ +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/io.h linux-2.6-stable/include/asm-arm/arch-at91/io.h +--- linux-2.6.21/include/asm-arm/arch-at91/io.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/io.h Fri May 11 14:45:12 2007 +@@ -29,4 +29,22 @@ + #define __mem_pci(a) (a) + + ++#ifndef __ASSEMBLY__ ++ ++static inline unsigned int at91_sys_read(unsigned int reg_offset) ++{ ++ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; ++ ++ return __raw_readl(addr + reg_offset); ++} ++ ++static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) ++{ ++ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; ++ ++ __raw_writel(value, addr + reg_offset); ++} ++ ++#endif ++ + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/irqs.h linux-2.6-stable/include/asm-arm/arch-at91/irqs.h +--- linux-2.6.21/include/asm-arm/arch-at91/irqs.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/irqs.h Fri May 11 14:45:12 2007 +@@ -21,6 +21,7 @@ + #ifndef __ASM_ARCH_IRQS_H + #define __ASM_ARCH_IRQS_H + ++#include <asm/io.h> + #include <asm/arch/at91_aic.h> + + #define NR_AIC_IRQS 32 +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/spi.h linux-2.6-stable/include/asm-arm/arch-at91/spi.h +--- linux-2.6.21/include/asm-arm/arch-at91/spi.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/include/asm-arm/arch-at91/spi.h Tue May 8 14:31:24 2007 +@@ -0,0 +1,54 @@ ++/* ++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 ++ * ++ * (c) SAN People (Pty) Ltd ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#ifndef AT91_LEGACY_SPI_H ++#define AT91_LEGACY_SPI_H ++ ++#define SPI_MAJOR 153 /* registered device number */ ++ ++#define DEFAULT_SPI_CLK 6000000 ++ ++ ++/* Maximum number of buffers in a single SPI transfer. ++ * DataFlash uses maximum of 2 ++ * spidev interface supports up to 8. ++ */ ++#define MAX_SPI_TRANSFERS 8 ++#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */ ++ ++/* ++ * Describes the buffers for a SPI transfer. ++ * A transmit & receive buffer must be specified for each transfer ++ */ ++struct spi_transfer_list { ++ void* tx[MAX_SPI_TRANSFERS]; /* transmit */ ++ int txlen[MAX_SPI_TRANSFERS]; ++ void* rx[MAX_SPI_TRANSFERS]; /* receive */ ++ int rxlen[MAX_SPI_TRANSFERS]; ++ int nr_transfers; /* number of transfers */ ++ int curr; /* current transfer */ ++}; ++ ++struct spi_local { ++ unsigned int pcs; /* Peripheral Chip Select value */ ++ ++ struct spi_transfer_list *xfers; /* current transfer list */ ++ dma_addr_t tx, rx; /* DMA address for current transfer */ ++ dma_addr_t txnext, rxnext; /* DMA address for next transfer */ ++}; ++ ++ ++/* Exported functions */ ++extern void spi_access_bus(short device); ++extern void spi_release_bus(short device); ++extern int spi_transfer(struct spi_transfer_list* list); ++ ++#endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/timex.h linux-2.6-stable/include/asm-arm/arch-at91/timex.h +--- linux-2.6.21/include/asm-arm/arch-at91/timex.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/timex.h Wed May 9 10:20:53 2007 +@@ -37,6 +37,11 @@ + #define AT91SAM9_MASTER_CLOCK 99959500 + #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) + ++#elif defined(CONFIG_ARCH_AT91SAM9RL) ++ ++#define AT91SAM9_MASTER_CLOCK 100000000 ++#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) ++ + #endif + + #endif +diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/uncompress.h linux-2.6-stable/include/asm-arm/arch-at91/uncompress.h +--- linux-2.6.21/include/asm-arm/arch-at91/uncompress.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/uncompress.h Fri May 11 14:45:12 2007 +@@ -21,7 +21,7 @@ + #ifndef __ASM_ARCH_UNCOMPRESS_H + #define __ASM_ARCH_UNCOMPRESS_H + +-#include <asm/hardware.h> ++#include <asm/io.h> + #include <asm/arch/at91_dbgu.h> + + /* +diff -urN -x CVS linux-2.6.21/include/linux/clk.h linux-2.6-stable/include/linux/clk.h +--- linux-2.6.21/include/linux/clk.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/linux/clk.h Tue May 8 12:13:31 2007 +@@ -121,4 +121,24 @@ + */ + struct clk *clk_get_parent(struct clk *clk); + ++/** ++ * clk_must_disable - report whether a clock's users must disable it ++ * @clk: one node in the clock tree ++ * ++ * This routine returns true only if the upcoming system state requires ++ * disabling the specified clock. ++ * ++ * It's common for platform power states to constrain certain clocks (and ++ * their descendants) to be unavailable, while other states allow that ++ * clock to be active. A platform's power states often include an "all on" ++ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and ++ * operating states which sacrifice functionality for lower power usage. ++ * ++ * The constraint value is commonly tested in device driver suspend(), to ++ * leave clocks active if they are needed for features like wakeup events. ++ * On platforms that support reduced functionality operating states, the ++ * constraint may also need to be tested during resume() and probe() calls. ++ */ ++int clk_must_disable(struct clk *clk); ++ + #endif +diff -urN -x CVS linux-2.6.21/include/linux/i2c-id.h linux-2.6-stable/include/linux/i2c-id.h +--- linux-2.6.21/include/linux/i2c-id.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/linux/i2c-id.h Tue May 8 12:13:31 2007 +@@ -202,6 +202,7 @@ + + /* --- PCA 9564 based algorithms */ + #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */ ++#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */ + + /* --- ACPI Embedded controller algorithms */ + #define I2C_HW_ACPI_EC 0x1f0000 +diff -urN -x CVS linux-2.6.21/include/video/atmel_lcdc.h linux-2.6-stable/include/video/atmel_lcdc.h +--- linux-2.6.21/include/video/atmel_lcdc.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/include/video/atmel_lcdc.h Thu May 10 12:34:01 2007 +@@ -0,0 +1,196 @@ ++/* ++ * Header file for AT91/AT32 LCD Controller ++ * ++ * Data structure and register user interface ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ATMEL_LCDC_H__ ++#define __ATMEL_LCDC_H__ ++ ++ /* LCD Controller info data structure */ ++struct atmel_lcdfb_info { ++ spinlock_t lock; ++ struct fb_info *info; ++ void __iomem *mmio; ++ unsigned long irq_base; ++ ++ unsigned int guard_time; ++ struct platform_device *pdev; ++ struct clk *bus_clk; ++ struct clk *lcdc_clk; ++ unsigned int default_bpp; ++ unsigned int default_lcdcon2; ++ unsigned int default_dmacon; ++ void (*atmel_lcdfb_power_control)(int on); ++ struct fb_monspecs *default_monspecs; ++ u32 pseudo_palette[16]; ++}; ++ ++#define ATMEL_LCDC_DMABADDR1 0x00 ++#define ATMEL_LCDC_DMABADDR2 0x04 ++#define ATMEL_LCDC_DMAFRMPT1 0x08 ++#define ATMEL_LCDC_DMAFRMPT2 0x0c ++#define ATMEL_LCDC_DMAFRMADD1 0x10 ++#define ATMEL_LCDC_DMAFRMADD2 0x14 ++ ++#define ATMEL_LCDC_DMAFRMCFG 0x18 ++#define ATMEL_LCDC_FRSIZE (0x7fffff << 0) ++#define ATMEL_LCDC_BLENGTH_OFFSET 24 ++#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET) ++ ++#define ATMEL_LCDC_DMACON 0x1c ++#define ATMEL_LCDC_DMAEN (0x1 << 0) ++#define ATMEL_LCDC_DMARST (0x1 << 1) ++#define ATMEL_LCDC_DMABUSY (0x1 << 2) ++#define ATMEL_LCDC_DMAUPDT (0x1 << 3) ++#define ATMEL_LCDC_DMA2DEN (0x1 << 4) ++ ++#define ATMEL_LCDC_DMA2DCFG 0x20 ++#define ATMEL_LCDC_ADDRINC_OFFSET 0 ++#define ATMEL_LCDC_ADDRINC (0xffff) ++#define ATMEL_LCDC_PIXELOFF_OFFSET 24 ++#define ATMEL_LCDC_PIXELOFF (0x1f << 24) ++ ++#define ATMEL_LCDC_LCDCON1 0x0800 ++#define ATMEL_LCDC_BYPASS (1 << 0) ++#define ATMEL_LCDC_CLKVAL_OFFSET 12 ++#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET) ++#define ATMEL_LCDC_LINCNT (0x7ff << 21) ++ ++#define ATMEL_LCDC_LCDCON2 0x0804 ++#define ATMEL_LCDC_DISTYPE (3 << 0) ++#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0) ++#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0) ++#define ATMEL_LCDC_DISTYPE_TFT (2 << 0) ++#define ATMEL_LCDC_SCANMOD (1 << 2) ++#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2) ++#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2) ++#define ATMEL_LCDC_IFWIDTH (3 << 3) ++#define ATMEL_LCDC_IFWIDTH_4 (0 << 3) ++#define ATMEL_LCDC_IFWIDTH_8 (1 << 3) ++#define ATMEL_LCDC_IFWIDTH_16 (2 << 3) ++#define ATMEL_LCDC_PIXELSIZE (7 << 5) ++#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5) ++#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5) ++#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5) ++#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5) ++#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5) ++#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5) ++#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5) ++#define ATMEL_LCDC_INVVD (1 << 8) ++#define ATMEL_LCDC_INVVD_NORMAL (0 << 8) ++#define ATMEL_LCDC_INVVD_INVERTED (1 << 8) ++#define ATMEL_LCDC_INVFRAME (1 << 9 ) ++#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9) ++#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9) ++#define ATMEL_LCDC_INVLINE (1 << 10) ++#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10) ++#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10) ++#define ATMEL_LCDC_INVCLK (1 << 11) ++#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11) ++#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11) ++#define ATMEL_LCDC_INVDVAL (1 << 12) ++#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12) ++#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12) ++#define ATMEL_LCDC_CLKMOD (1 << 15) ++#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15) ++#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15) ++#define ATMEL_LCDC_MEMOR (1 << 31) ++#define ATMEL_LCDC_MEMOR_BIG (0 << 31) ++#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31) ++ ++#define ATMEL_LCDC_TIM1 0x0808 ++#define ATMEL_LCDC_VFP (0xff << 0) ++#define ATMEL_LCDC_VBP_OFFSET 8 ++#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET) ++#define ATMEL_LCDC_VPW_OFFSET 16 ++#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET) ++#define ATMEL_LCDC_VHDLY_OFFSET 24 ++#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET) ++ ++#define ATMEL_LCDC_TIM2 0x080c ++#define ATMEL_LCDC_HBP (0xff << 0) ++#define ATMEL_LCDC_HPW_OFFSET 8 ++#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET) ++#define ATMEL_LCDC_HFP_OFFSET 21 ++#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET) ++ ++#define ATMEL_LCDC_LCDFRMCFG 0x0810 ++#define ATMEL_LCDC_LINEVAL (0x7ff << 0) ++#define ATMEL_LCDC_HOZVAL_OFFSET 21 ++#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET) ++ ++#define ATMEL_LCDC_FIFO 0x0814 ++#define ATMEL_LCDC_FIFOTH (0xffff) ++ ++#define ATMEL_LCDC_MVAL 0x0818 ++ ++#define ATMEL_LCDC_DP1_2 0x081c ++#define ATMEL_LCDC_DP4_7 0x0820 ++#define ATMEL_LCDC_DP3_5 0x0824 ++#define ATMEL_LCDC_DP2_3 0x0828 ++#define ATMEL_LCDC_DP5_7 0x082c ++#define ATMEL_LCDC_DP3_4 0x0830 ++#define ATMEL_LCDC_DP4_5 0x0834 ++#define ATMEL_LCDC_DP6_7 0x0838 ++#define ATMEL_LCDC_DP1_2_VAL (0xff) ++#define ATMEL_LCDC_DP4_7_VAL (0xfffffff) ++#define ATMEL_LCDC_DP3_5_VAL (0xfffff) ++#define ATMEL_LCDC_DP2_3_VAL (0xfff) ++#define ATMEL_LCDC_DP5_7_VAL (0xfffffff) ++#define ATMEL_LCDC_DP3_4_VAL (0xffff) ++#define ATMEL_LCDC_DP4_5_VAL (0xfffff) ++#define ATMEL_LCDC_DP6_7_VAL (0xfffffff) ++ ++#define ATMEL_LCDC_PWRCON 0x083c ++#define ATMEL_LCDC_PWR (1 << 0) ++#define ATMEL_LCDC_GUARDT_OFFSET 1 ++#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET) ++#define ATMEL_LCDC_BUSY (1 << 31) ++ ++#define ATMEL_LCDC_CONTRAST_CTR 0x0840 ++#define ATMEL_LCDC_PS (3 << 0) ++#define ATMEL_LCDC_PS_DIV1 (0 << 0) ++#define ATMEL_LCDC_PS_DIV2 (1 << 0) ++#define ATMEL_LCDC_PS_DIV4 (2 << 0) ++#define ATMEL_LCDC_PS_DIV8 (3 << 0) ++#define ATMEL_LCDC_POL (1 << 2) ++#define ATMEL_LCDC_POL_NEGATIVE (0 << 2) ++#define ATMEL_LCDC_POL_POSITIVE (1 << 2) ++#define ATMEL_LCDC_ENA (1 << 3) ++#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3) ++#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3) ++ ++#define ATMEL_LCDC_CONTRAST_VAL 0x0844 ++#define ATMEL_LCDC_CVAL (0xff) ++ ++#define ATMEL_LCDC_IER 0x0848 ++#define ATMEL_LCDC_IDR 0x084c ++#define ATMEL_LCDC_IMR 0x0850 ++#define ATMEL_LCDC_ISR 0x0854 ++#define ATMEL_LCDC_ICR 0x0858 ++#define ATMEL_LCDC_LNI (1 << 0) ++#define ATMEL_LCDC_LSTLNI (1 << 1) ++#define ATMEL_LCDC_EOFI (1 << 2) ++#define ATMEL_LCDC_UFLWI (1 << 4) ++#define ATMEL_LCDC_OWRI (1 << 5) ++#define ATMEL_LCDC_MERI (1 << 6) ++ ++#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4)) ++ ++#endif /* __ATMEL_LCDC_H__ */ +diff -urN -x CVS linux-2.6.21/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c +--- linux-2.6.21/sound/soc/at91/eti_b1_wm8731.c Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c Tue May 8 12:13:58 2007 +@@ -34,8 +34,7 @@ + #include <sound/soc.h> + #include <sound/soc-dapm.h> + +-#include <asm/arch/hardware.h> +-#include <asm/arch/at91_pio.h> ++#include <asm/hardware.h> + #include <asm/arch/gpio.h> + + #include "../codecs/wm8731.h" +@@ -48,13 +47,6 @@ + #define DBG(x...) + #endif + +-#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32) +-#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32) +-#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32) +-#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32) +-#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32) +-#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32) +- + static struct clk *pck1_clk; + static struct clk *pllb_clk; + +@@ -277,7 +269,6 @@ + static int __init eti_b1_init(void) + { + int ret; +- u32 ssc_pio_lines; + struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data; + + if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) { +@@ -311,19 +302,12 @@ + goto fail_io_unmap; + } + +- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1 +- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1; +- +- /* Reset all PIO registers and assign lines to peripheral A */ +- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines); ++ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */ ++ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */ ++/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */ ++ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */ + + /* + * Set PCK1 parent to PLLB and its rate to 12 Mhz. diff --git a/target/linux/at91/patches-2.6.21/001-vlink-machine.patch b/target/linux/at91/patches-2.6.21/001-vlink-machine.patch new file mode 100644 index 0000000..1c12db3 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/001-vlink-machine.patch @@ -0,0 +1,211 @@ +--- linux-2.6.21.1.orig/arch/arm/boot/compressed/head-at91rm9200.S 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/boot/compressed/head-at91rm9200.S 2007-05-28 12:52:16.000000000 +0200 +@@ -61,6 +61,12 @@ + cmp r7, r3 + beq 99f + ++ @ FDL Versalink : 1053 ++ mov r3, #(MACH_TYPE_VLINK & 0xff) ++ orr r3, r3, #(MACH_TYPE_VLINK & 0xff00) ++ cmp r7, r3 ++ beq 99f ++ + @ Ajeco 1ARM : 1075 + mov r3, #(MACH_TYPE_ONEARM & 0xff) + orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) +--- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c 2007-05-28 13:09:54.000000000 +0200 +@@ -0,0 +1,160 @@ ++/* ++ * linux/arch/arm/mach-at91/board-vlink.c ++ * ++ * Copyright (C) 2005 SAN People ++ * Copyright (C) 2006,2007 Guthrie Consulting ++ * ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/mtd/physmap.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91rm9200_mc.h> ++ ++#include "generic.h" ++ ++ ++/* ++ * Serial port configuration. ++ * 0 .. 3 = USART0 .. USART3 ++ * 4 = DBGU ++ */ ++static struct at91_uart_config __initdata vlink_uart_config = { ++ .console_tty = 0, /* ttyS0 */ ++ .nr_tty = 5, ++ .tty_map = { 4, 1, 0, 3, 2 } /* ttyS0, ..., ttyS4 */ ++}; ++ ++static void __init vlink_map_io(void) ++{ ++ /* Initialize processor: 18.432 MHz crystal */ ++ at91rm9200_initialize(18432000, AT91RM9200_PQFP); ++ ++ /* Setup the LEDs */ ++// at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); ++ ++ /* Setup the serial ports and console */ ++ at91_init_serial(&vlink_uart_config); ++} ++ ++static void __init vlink_init_irq(void) ++{ ++ at91rm9200_init_interrupts(NULL); ++} ++ ++static struct at91_eth_data __initdata vlink_eth_data = { ++ .phy_irq_pin = AT91_PIN_PC4, ++ .is_rmii = 1, ++}; ++ ++static struct at91_usbh_data __initdata vlink_usbh_data = { ++ .ports = 1, ++}; ++ ++static struct at91_udc_data __initdata vlink_udc_data = { ++ .vbus_pin = AT91_PIN_PD4, ++ .pullup_pin = AT91_PIN_PD5, ++}; ++ ++static struct at91_mmc_data __initdata vlink_mmc_data = { ++// .det_pin = AT91_PIN_PB27, ++ .slot_b = 0, ++ .wire4 = 1, ++// .wp_pin = AT91_PIN_PA17, ++}; ++ ++static struct spi_board_info vlink_spi_devices[] = { ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ }, ++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD ++ { /* DataFlash card */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 3, ++ .max_speed_hz = 15 * 1000 * 1000, ++ }, ++#endif ++}; ++ ++static struct at91_gpio_led vlink_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PB1, ++ .trigger = "heartbeat", ++ }, ++ { ++ .name = "led1", ++ .gpio = AT91_PIN_PB2, ++ .trigger = "timer", ++ } ++}; ++ ++static void __init vlink_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* Ethernet */ ++ at91_add_device_eth(&vlink_eth_data); ++ /* USB Host */ ++ at91_add_device_usbh(&vlink_usbh_data); ++ /* USB Device */ ++ at91_add_device_udc(&vlink_udc_data); ++ at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ ++ /* I2C */ ++ at91_add_device_i2c(); ++ /* SPI */ ++ at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices)); ++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD ++ /* DataFlash card */ ++// at91_set_gpio_output(AT91_PIN_PB22, 0); ++#else ++ /* MMC */ ++// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ ++ at91_add_device_mmc(0, &vlink_mmc_data); ++#endif ++ /* LEDs */ ++ at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds)); ++} ++ ++MACHINE_START(VLINK, "FDL VersaLink") ++ /* Maintainer: Guthrie Consulting */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91rm9200_timer, ++ .map_io = vlink_map_io, ++ .init_irq = vlink_init_irq, ++ .init_machine = vlink_board_init, ++MACHINE_END +--- linux-2.6.21.1.orig/arch/arm/mach-at91/Kconfig 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/Kconfig 2007-05-28 13:11:45.000000000 +0200 +@@ -96,6 +96,12 @@ + help + Select this if you are using Promwad's Chub board. + ++config MACH_VLINK ++ bool "Figment Design Labs VersaLink" ++ depends on ARCH_AT91RM9200 ++ help ++ Select this if you are using FDL's VersaLink board ++ + endif + + # ---------------------------------------------------------- +--- linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/Makefile 2007-05-28 13:13:15.000000000 +0200 +@@ -29,6 +29,7 @@ + obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o + obj-$(CONFIG_MACH_KAFA) += board-kafa.o + obj-$(CONFIG_MACH_CHUB) += board-chub.o ++obj-$(CONFIG_MACH_VLINK) += board-vlink.o + + # AT91SAM9260 board-specific support + obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o +@@ -51,6 +52,7 @@ + led-$(CONFIG_MACH_CSB637) += leds.o + led-$(CONFIG_MACH_KB9200) += leds.o + led-$(CONFIG_MACH_KAFA) += leds.o ++led-$(CONFIG_MACH_VLINK) += leds.o + obj-$(CONFIG_LEDS) += $(led-y) + + # VGA support diff --git a/target/linux/at91/patches-2.6.21/002-led-driver.patch b/target/linux/at91/patches-2.6.21/002-led-driver.patch new file mode 100644 index 0000000..e78ed44 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/002-led-driver.patch @@ -0,0 +1,189 @@ +diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c +--- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c 2007-05-28 13:33:41.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c 2007-05-28 14:43:28.000000000 +0200 +@@ -61,7 +61,7 @@ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); + + /* Setup the LEDs */ +-// at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); ++ at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15); + + /* Setup the serial ports and console */ + at91_init_serial(&vlink_uart_config); +@@ -81,10 +81,12 @@ + .ports = 1, + }; + ++/* + static struct at91_udc_data __initdata vlink_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, + }; ++*/ + + static struct at91_mmc_data __initdata vlink_mmc_data = { + // .det_pin = AT91_PIN_PB27, +@@ -108,18 +110,19 @@ + #endif + }; + +-static struct at91_gpio_led vlink_leds[] = { ++/*static struct at91_gpio_led vlink_leds[] = { + { + .name = "led0", +- .gpio = AT91_PIN_PB1, ++ .gpio = AT91_PIN_PC14, + .trigger = "heartbeat", + }, + { + .name = "led1", +- .gpio = AT91_PIN_PB2, ++ .gpio = AT91_PIN_PC15, + .trigger = "timer", + } + }; ++*/ + + static void __init vlink_board_init(void) + { +@@ -130,8 +133,8 @@ + /* USB Host */ + at91_add_device_usbh(&vlink_usbh_data); + /* USB Device */ +- at91_add_device_udc(&vlink_udc_data); +- at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ ++// at91_add_device_udc(&vlink_udc_data); ++// at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* I2C */ + at91_add_device_i2c(); + /* SPI */ +@@ -145,7 +148,7 @@ + at91_add_device_mmc(0, &vlink_mmc_data); + #endif + /* LEDs */ +- at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds)); ++// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds)); + } + + MACHINE_START(VLINK, "FDL VersaLink") +diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile linux-2.6.21.1/arch/arm/mach-at91/Makefile +--- linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile 2007-05-28 13:13:15.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/Makefile 2007-05-28 14:19:06.000000000 +0200 +@@ -52,7 +52,7 @@ + led-$(CONFIG_MACH_CSB637) += leds.o + led-$(CONFIG_MACH_KB9200) += leds.o + led-$(CONFIG_MACH_KAFA) += leds.o +-led-$(CONFIG_MACH_VLINK) += leds.o ++led-$(CONFIG_MACH_VLINK) += vlink_leds.o + obj-$(CONFIG_LEDS) += $(led-y) + + # VGA support +diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/vlink_leds.c linux-2.6.21.1/arch/arm/mach-at91/vlink_leds.c +--- linux-2.6.21.1.orig/arch/arm/mach-at91/vlink_leds.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1/arch/arm/mach-at91/vlink_leds.c 2007-05-28 14:41:03.000000000 +0200 +@@ -0,0 +1,105 @@ ++/* ++ * LED driver for Atmel AT91-based boards. ++ * ++ * Copyright (C) SAN People (Pty) Ltd ++ * Modified for FDL VersaLink Copyright (C) Guthrie Consulting ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++*/ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++ ++#include <asm/mach-types.h> ++#include <asm/leds.h> ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++ ++static inline void at91_led_on(unsigned int led) ++{ ++ at91_set_gpio_value(led, 0); ++} ++ ++static inline void at91_led_off(unsigned int led) ++{ ++ at91_set_gpio_value(led, 1); ++} ++ ++static inline void at91_led_toggle(unsigned int led) ++{ ++ unsigned long is_off = at91_get_gpio_value(led); ++ if (is_off) { ++ at91_led_on(led); ++ at91_led_off(at91_leds_cpu); ++ } ++ else { ++ at91_led_on(at91_leds_cpu); ++ at91_led_off(led); ++ } ++} ++ ++ ++/* ++ * Handle LED events. ++ */ ++ ++/* ++ * VersaLink has a single bi-coloured LED which changes colour when the ++ * polarity is reversed ++ */ ++static void at91_leds_event(led_event_t evt) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ switch(evt) { ++ case led_start: /* System startup */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++ ++ case led_stop: /* System stop / suspend */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++ ++#ifdef CONFIG_LEDS_TIMER ++ case led_timer: /* Every 50 timer ticks */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++#endif ++ ++#ifdef CONFIG_LEDS_CPU ++ case led_idle_start: /* Entering idle state */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++ ++ case led_idle_end: /* Exit idle state */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++#endif ++ ++ default: ++ break; ++ } ++ ++ local_irq_restore(flags); ++} ++ ++ ++static int __init leds_init(void) ++{ ++ if (!at91_leds_timer || !at91_leds_cpu) ++ return -ENODEV; ++ ++ leds_event = at91_leds_event; ++ ++ leds_event(led_start); ++ return 0; ++} ++ ++__initcall(leds_init); diff --git a/target/linux/at91/patches-2.6.21/003-gpio-driver.patch b/target/linux/at91/patches-2.6.21/003-gpio-driver.patch new file mode 100644 index 0000000..aa5a2e3 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/003-gpio-driver.patch @@ -0,0 +1,355 @@ +--- linux-2.6.21.1.orig/arch/arm/mach-at91/gpio.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/gpio.c 2007-05-28 15:30:48.000000000 +0200 +@@ -27,6 +27,7 @@ + + static struct at91_gpio_bank *gpio; + static int gpio_banks; ++static u32 pio_gpio_pin[4] = { 0, 0, 0, 0 }; + + + static inline void __iomem *pin_to_controller(unsigned pin) +@@ -71,9 +72,13 @@ + { + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); ++ int bank = (pin - PIN_BASE) / 32; + + if (!pio) + return -EINVAL; ++ ++ pio_gpio_pin[bank] |= mask; ++ + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_PER); +@@ -130,10 +135,13 @@ + { + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); ++ int bank = (pin - PIN_BASE) / 32; + + if (!pio) + return -EINVAL; + ++ pio_gpio_pin[bank] |= mask; ++ + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ODR); +@@ -151,10 +159,13 @@ + { + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); ++ int bank = (pin - PIN_BASE) / 32; + + if (!pio) + return -EINVAL; + ++ pio_gpio_pin[bank] |= mask; ++ + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); +@@ -262,6 +273,18 @@ + } + EXPORT_SYMBOL(at91_get_gpio_value); + ++int at91_is_pin_gpio(unsigned pin) ++{ ++ void __iomem *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ int bank = (pin - PIN_BASE) / 32; ++ ++ if (!pio) ++ return -EINVAL; ++ return (pio_gpio_pin[bank] & mask) != 0; ++} ++EXPORT_SYMBOL(at91_is_pin_gpio); ++ + /*--------------------------------------------------------------------------*/ + + #ifdef CONFIG_PM +--- linux-2.6.21.1.orig/drivers/char/Kconfig 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/drivers/char/Kconfig 2007-05-28 15:37:43.000000000 +0200 +@@ -1087,5 +1087,12 @@ + The SPI driver gives user mode access to this serial + bus on the AT91RM9200 processor. + ++config AT91_VLIO ++ tristate "Versalink LED and GPIO interface" ++ depends on ARCH_AT91RM9200 && MACH_VLINK ++ default n ++ help ++ Provides a handler GPIO's in userspace ++ + endmenu + +--- linux-2.6.21.1.orig/drivers/char/Makefile 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/drivers/char/Makefile 2007-05-28 15:38:11.000000000 +0200 +@@ -95,6 +95,7 @@ + obj-$(CONFIG_TELCLOCK) += tlclk.o + obj-$(CONFIG_AT91_SPI) += at91_spi.o + obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o ++obj-$(CONFIG_AT91_VLIO) += vlink_giu.o + + obj-$(CONFIG_WATCHDOG) += watchdog/ + obj-$(CONFIG_MWAVE) += mwave/ +--- linux-2.6.21.1.orig/drivers/char/vlink_giu.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1/drivers/char/vlink_giu.c 2007-05-28 15:39:47.000000000 +0200 +@@ -0,0 +1,256 @@ ++/* ++ * Driver for FDL Versalink GPIO ++ * ++ * Copyright (C) 2005 Guthrie Consulting ++ * Author: Hamish Guthrie <hamish@prodigi.ch> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++ ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/fs.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/types.h> ++#include <linux/proc_fs.h> ++#include <linux/fcntl.h> ++#include <linux/seq_file.h> ++#include <linux/cdev.h> ++#include <asm/arch/gpio.h> ++#include <asm/uaccess.h> ++ ++static int major; /* default is dynamic major device number */ ++module_param(major, int, 0); ++MODULE_PARM_DESC(major, "Major device number"); ++ ++#define VIO_NR_DEVS 96 ++ ++struct vio_dev { ++ struct cdev cdev; ++}; ++ ++struct vio_dev *vio_devices; ++static struct class *vio_class; ++ ++static ssize_t gpio_read(struct file *file, char __user *buf, size_t len, ++ loff_t *ppos) ++{ ++ unsigned int pin; ++ int retval; ++ char value = '0'; ++ ++ pin = iminor(file->f_dentry->d_inode); ++ ++ retval = at91_get_gpio_value(PIN_BASE + pin); ++ if (retval < 0) ++ return -EFAULT; ++ ++ value = retval + 0x30; ++ if (put_user(value, buf)) ++ return -EFAULT; ++ ++ return 1; ++} ++ ++static ssize_t gpio_write(struct file *file, const char __user *data, ++ size_t len, loff_t *ppos) ++{ ++ unsigned int pin; ++ size_t i; ++ char c; ++ int retval = 0; ++ ++ pin = iminor(file->f_dentry->d_inode); ++ ++ for (i = 0; i < len; i++) { ++ if (get_user(c, data + i)) ++ return -EFAULT; ++ ++ switch (c) { ++ case '0': ++ case '1': ++ retval = at91_set_gpio_value(PIN_BASE + pin, (int)c - 0x30); ++ if (retval < 0) ++ return -EFAULT; ++ break; ++ default: ++ break; ++ } ++ ++ if (retval < 0) ++ break; ++ } ++ ++ return i; ++} ++ ++static int gpio_open(struct inode *inode, struct file *file) ++{ ++ return nonseekable_open(inode, file); ++} ++ ++static int gpio_release(struct inode *inode, struct file *file) ++{ ++ return 0; ++} ++ ++static struct file_operations vio_fops = { ++ .owner = THIS_MODULE, ++ .read = gpio_read, ++ .write = gpio_write, ++ .open = gpio_open, ++ .release = gpio_release, ++}; ++ ++static void vio_setup_cdev(struct vio_dev *dev, int index) ++{ ++ int err, devno = MKDEV(major, index); ++ ++ cdev_init(&dev->cdev, &vio_fops); ++ dev->cdev.owner = THIS_MODULE; ++ dev->cdev.ops = &vio_fops; ++ err = cdev_add (&dev->cdev, devno, 1); ++ if (err) ++ printk(KERN_NOTICE "vio: Error %d adding vio%d", err, index); ++} ++ ++static int vio_remove(struct platform_device *dev) ++{ ++ int i; ++ dev_t devno = MKDEV(major, 0); ++ ++ if (vio_devices) { ++ for(i=0; i<VIO_NR_DEVS; i++) { ++ int iodev = at91_is_pin_gpio(PIN_BASE + i); ++ if (iodev) { ++ cdev_del(&vio_devices[i].cdev); ++ class_device_destroy(vio_class, MKDEV(major, i)); ++ } ++ } ++ kfree(vio_devices); ++ } ++ ++ class_destroy(vio_class); ++ unregister_chrdev_region(devno, VIO_NR_DEVS); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ return 0; ++} ++ ++static int vio_probe(struct platform_device *dev) ++{ ++ int retval, i, j; ++ dev_t vdev = 0; ++ ++ if (major) { ++ vdev = MKDEV(major, 0); ++ retval = register_chrdev_region(vdev, VIO_NR_DEVS, "vio"); ++ } else { ++ retval = alloc_chrdev_region(&vdev, 0, VIO_NR_DEVS, "vio"); ++ major = MAJOR(vdev); ++ } ++ if (retval < 0) { ++ printk(KERN_WARNING "vio: can't get major %d\n", major); ++ return retval; ++ } ++ ++ if (major == 0) { ++ major = retval; ++ printk(KERN_INFO "vio: major number %d\n", major); ++ } ++ ++ vio_class = class_create(THIS_MODULE, "vio"); ++ ++ if (IS_ERR(vio_class)) { ++ printk(KERN_ERR "vio: Error creating vio class\n"); ++ vio_remove(dev); ++ return PTR_ERR(vio_class); ++ } ++ ++ vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL); ++ if (!vio_devices) { ++ retval = -ENOMEM; ++ goto fail; ++ } ++ memset(vio_devices, 0, VIO_NR_DEVS * sizeof(struct vio_dev)); ++ ++ for (i=0; i<VIO_NR_DEVS/32; i++) ++ for(j=0; j<32; j++) { ++ int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j); ++ if (iodev) { ++ vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j); ++ class_device_create(vio_class, NULL, MKDEV(major, i*32 + j), NULL, ++ "vio%c%d", i + 'A', j); ++ } ++ } ++ ++ platform_set_drvdata(dev, vio_devices); ++ ++ return 0; ++ ++fail: ++ vio_remove(dev); ++ return retval; ++} ++ ++static struct platform_device *vio_platform_device; ++ ++static struct platform_driver vio_driver = { ++ .probe = vio_probe, ++ .remove = vio_remove, ++ .driver = { ++ .name = "vio", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init vio_init(void) ++{ ++ int retval; ++ ++ vio_platform_device = platform_device_register_simple("vio", -1, NULL, 0); ++ if (IS_ERR(vio_platform_device)) { ++ printk(KERN_WARNING "vio: device registration failed\n"); ++ return PTR_ERR(vio_platform_device); ++ } ++ ++ retval = platform_driver_register(&vio_driver); ++ if (retval < 0) { ++ printk(KERN_WARNING "vio: driver registration failed\n"); ++ platform_device_unregister(vio_platform_device); ++ } ++ ++ return retval; ++} ++ ++static void __exit vio_exit(void) ++{ ++ platform_driver_unregister(&vio_driver); ++ platform_device_unregister(vio_platform_device); ++} ++ ++module_init(vio_init); ++module_exit(vio_exit); ++ ++MODULE_AUTHOR("Hamish Guthrie <hamish@prodigi.ch>"); ++MODULE_DESCRIPTION("FDL Versalink GPIO Driver"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/at91/patches-2.6.21/006-change-gpios.patch b/target/linux/at91/patches-2.6.21/006-change-gpios.patch new file mode 100644 index 0000000..97a4a8d --- /dev/null +++ b/target/linux/at91/patches-2.6.21/006-change-gpios.patch @@ -0,0 +1,36 @@ +--- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c 2007-05-28 15:53:31.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c 2007-05-28 15:58:46.000000000 +0200 +@@ -149,6 +149,33 @@ + #endif + /* LEDs */ + // at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds)); ++ ++/* Other LED's */ ++ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1 ++ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1 ++ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1 ++ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1 ++ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2 ++ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2 ++ ++/* SIM Cards */ ++ at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3 ++ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2 ++ at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1 ++ ++/* GSM Module Control */ ++ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF ++ ++/* Test jig presence detection */ ++ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT ++ ++/* Power indicator */ ++ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND ++ ++/* USB Device control */ ++ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX ++ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP ++ + } + + MACHINE_START(VLINK, "FDL VersaLink") diff --git a/target/linux/at91/patches-2.6.21/007-mtd-partition.patch b/target/linux/at91/patches-2.6.21/007-mtd-partition.patch new file mode 100644 index 0000000..98bec0d --- /dev/null +++ b/target/linux/at91/patches-2.6.21/007-mtd-partition.patch @@ -0,0 +1,36 @@ +--- linux-2.6.21.1.orig/drivers/mtd/devices/at91_dataflash.c 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/drivers/mtd/devices/at91_dataflash.c 2007-05-28 16:10:21.000000000 +0200 +@@ -173,7 +173,7 @@ + }; + #endif + +-static const char *part_probes[] = { "cmdlinepart", NULL, }; ++static const char *part_probes[] = { "cmdlinepart", "at91part", NULL, }; + + #endif + +--- linux-2.6.21.1.orig/drivers/mtd/Kconfig 2007-05-28 12:22:09.000000000 +0200 ++++ linux-2.6.21.1/drivers/mtd/Kconfig 2007-05-28 16:09:16.000000000 +0200 +@@ -157,6 +157,12 @@ + for your particular device. It won't happen automatically. The + 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. + ++config MTD_AT91_PARTS ++ tristate "Atmel AT91 partitioning support" ++ depends on MTD_PARTITIONS && ARCH_AT91RM9200 && AT91_SPI ++ ---help--- ++ Atmel AT91 partitioning support ++ + comment "User Modules And Translation Layers" + depends on MTD + +--- linux-2.6.21.1.orig/drivers/mtd/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1/drivers/mtd/Makefile 2007-05-28 16:09:55.000000000 +0200 +@@ -12,6 +12,7 @@ + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o ++obj-$(CONFIG_MTD_AT91_PARTS) += at91part.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/at91/patches-2.6.21/008-fdl-serial.patch b/target/linux/at91/patches-2.6.21/008-fdl-serial.patch new file mode 100644 index 0000000..4258919 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/008-fdl-serial.patch @@ -0,0 +1,160 @@ +--- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/drivers/serial/atmel_serial.c 2007-05-28 16:39:09.000000000 +0200 +@@ -174,7 +174,35 @@ + at91_set_gpio_value(AT91_PIN_PA21, 0); + else + at91_set_gpio_value(AT91_PIN_PA21, 1); ++ ++ /* ++ * FDL VersaLink adds GPIOS to provide full modem control on ++ * USART 0 - Drive DTR and RI pins manually ++ */ ++ if (mctrl & TIOCM_DTR) ++ at91_set_gpio_value(AT91_PIN_PB6, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB6, 1); ++ if (mctrl & TIOCM_RI) ++ at91_set_gpio_value(AT91_PIN_PB7, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB7, 1); + } ++ ++ /* ++ * FDL VersaLink adds GPIOS to provide full modem control on ++ * USART 3 - Drive DTR and RI pins manually ++ */ ++ if (port->mapbase == AT91RM9200_BASE_US3) { ++ if (mctrl & TIOCM_DTR) ++ at91_set_gpio_value(AT91_PIN_PB29, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB29, 1); ++ if (mctrl & TIOCM_RI) ++ at91_set_gpio_value(AT91_PIN_PB2, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB2, 1); ++ } + } + #endif + +@@ -211,8 +239,10 @@ + /* + * The control signals are active low. + */ +- if (!(status & ATMEL_US_DCD)) +- ret |= TIOCM_CD; ++ ++ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3)) ++ if (!(status & ATMEL_US_DCD)) ++ ret |= TIOCM_CD; + if (!(status & ATMEL_US_CTS)) + ret |= TIOCM_CTS; + if (!(status & ATMEL_US_DSR)) +@@ -220,6 +250,16 @@ + if (!(status & ATMEL_US_RI)) + ret |= TIOCM_RI; + ++ /* ++ * Read the GPIO's for the FDL VersaLink special case ++ */ ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ if (!(at91_get_gpio_value(AT91_PIN_PA19))) ++ ret |= TIOCM_CD; ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ if (!(at91_get_gpio_value(AT91_PIN_PA24))) ++ ret |= TIOCM_CD; ++ + return ret; + } + +@@ -511,6 +551,34 @@ + } + + /* ++ * USART0 DCD Interrupt handler ++ */ ++ ++static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id) ++{ ++ struct uart_port *port = dev_id; ++ int status = at91_get_gpio_value(irq); ++ ++ uart_handle_dcd_change(port, !(status)); ++ ++ return IRQ_HANDLED; ++} ++ ++/* ++ * USART3 DCD Interrupt handler ++ */ ++ ++static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id) ++{ ++ struct uart_port *port = dev_id; ++ int status = at91_get_gpio_value(irq); ++ ++ uart_handle_dcd_change(port, !(status)); ++ ++ return IRQ_HANDLED; ++} ++ ++/* + * Interrupt handler + */ + static irqreturn_t atmel_interrupt(int irq, void *dev_id) +@@ -587,6 +655,23 @@ + return retval; + } + ++ if (port->mapbase == AT91RM9200_BASE_US0) { ++ retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port); ++ if (retval) { ++ printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n"); ++ free_irq(port->irq, port); ++ return retval; ++ } ++ } ++ if (port->mapbase == AT91RM9200_BASE_US3) { ++ retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port); ++ if (retval) { ++ printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n"); ++ free_irq(port->irq, port); ++ return retval; ++ } ++ } ++ + /* + * Initialize DMA (if necessary) + */ +@@ -603,6 +688,10 @@ + kfree(atmel_port->pdc_rx[0].buf); + } + free_irq(port->irq, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); + return -ENOMEM; + } + pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); +@@ -636,6 +725,10 @@ + retval = atmel_open_hook(port); + if (retval) { + free_irq(port->irq, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); + return retval; + } + } +@@ -701,6 +794,10 @@ + * Free the interrupt + */ + free_irq(port->irq, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); + + /* + * If there is a specific "close" function (to unregister diff --git a/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch b/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch new file mode 100644 index 0000000..f2491f3 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch @@ -0,0 +1,34 @@ +--- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c 2007-05-28 16:44:36.000000000 +0200 +@@ -618,7 +618,6 @@ + + + #if defined(CONFIG_NEW_LEDS) +- + static struct platform_device at91_leds = { + .name = "at91_leds", + .id = -1, +@@ -724,6 +723,10 @@ + * We need to drive the pin manually. Default is off (RTS is active low). + */ + at91_set_gpio_output(AT91_PIN_PA21, 1); ++ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */ ++ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */ ++ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */ ++ at91_set_deglitch(AT91_PIN_PA19, 1); + } + + static struct resource uart1_resources[] = { +@@ -835,6 +838,12 @@ + { + at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ + at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ ++ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ ++ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ ++ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */ ++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */ ++ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */ ++ at91_set_deglitch(AT91_PIN_PA24, 1); + } + + struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ diff --git a/target/linux/at91/patches-2.6.21/010-dm9161a-phyfix.patch b/target/linux/at91/patches-2.6.21/010-dm9161a-phyfix.patch new file mode 100644 index 0000000..9ad8c42 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/010-dm9161a-phyfix.patch @@ -0,0 +1,28 @@ +--- linux-2.6.21.1/drivers/net/arm/at91_ether.c.old 2007-06-04 18:15:49.000000000 +0200 ++++ linux-2.6.21.1/drivers/net/arm/at91_ether.c 2007-06-04 18:10:36.000000000 +0200 +@@ -146,6 +146,7 @@ + struct at91_private *lp = netdev_priv(dev); + unsigned int bmsr, bmcr, lpa, mac_cfg; + unsigned int speed, duplex; ++ unsigned long timeout = jiffies + HZ; + + if (!mii_link_ok(&lp->mii)) { /* no link */ + netif_carrier_off(dev); +@@ -158,8 +159,15 @@ + read_phy(lp->phy_address, MII_BMSR, &bmsr); + read_phy(lp->phy_address, MII_BMCR, &bmcr); + if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */ +- if (!(bmsr & BMSR_ANEGCOMPLETE)) +- return; /* Do nothing - another interrupt generated when negotiation complete */ ++ while (!(bmsr & BMSR_ANEGCOMPLETE)) { ++ if (time_after(jiffies, timeout)) { ++ printk("at91_ether: Auto-negotiate timeout\n"); ++ return; ++ } ++ read_phy(lp->phy_address, MII_BMSR, &bmsr); ++ read_phy(lp->phy_address, MII_BMCR, &bmcr); ++ cpu_relax(); ++ } + + read_phy(lp->phy_address, MII_LPA, &lpa); + if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100; diff --git a/target/linux/at91/patches-2.6.21/011-vlink-resetfix.patch b/target/linux/at91/patches-2.6.21/011-vlink-resetfix.patch new file mode 100644 index 0000000..78ff384 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/011-vlink-resetfix.patch @@ -0,0 +1,10 @@ +--- linux-2.6.21.1.old/arch/arm/mach-at91/board-vlink.c 2007-06-04 15:45:19.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c 2007-06-05 05:27:19.000000000 +0200 +@@ -175,6 +175,7 @@ + /* USB Device control */ + at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX + at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP ++ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive + + } + diff --git a/target/linux/at91/patches-2.6.21/012-at91-mmcfix.patch b/target/linux/at91/patches-2.6.21/012-at91-mmcfix.patch new file mode 100644 index 0000000..e8991ae --- /dev/null +++ b/target/linux/at91/patches-2.6.21/012-at91-mmcfix.patch @@ -0,0 +1,424 @@ +--- linux-2.6.21.1.old/drivers/mmc/at91_mci.c 2007-06-05 09:08:57.000000000 +0200 ++++ linux-2.6.21.1/drivers/mmc/at91_mci.c 2007-06-05 10:59:11.000000000 +0200 +@@ -79,7 +79,8 @@ + + #define DRIVER_NAME "at91_mci" + +-#undef SUPPORT_4WIRE ++//#undef SUPPORT_4WIRE ++#define SUPPORT_4WIRE + + #define FL_SENT_COMMAND (1 << 0) + #define FL_SENT_STOP (1 << 1) +@@ -132,7 +133,7 @@ + /* + * Copy from sg to a dma block - used for transfers + */ +-static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data) ++static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data) + { + unsigned int len, i, size; + unsigned *dmabuf = host->buffer; +@@ -181,7 +182,7 @@ + /* + * Prepare a dma read + */ +-static void at91mci_pre_dma_read(struct at91mci_host *host) ++static void at91_mci_pre_dma_read(struct at91mci_host *host) + { + int i; + struct scatterlist *sg; +@@ -249,23 +250,24 @@ + /* + * Handle after a dma read + */ +-static void at91mci_post_dma_read(struct at91mci_host *host) ++static int at91_mci_post_dma_read(struct at91mci_host *host) + { + struct mmc_command *cmd; + struct mmc_data *data; ++ int completed = 0; + + pr_debug("post dma read\n"); + + cmd = host->cmd; + if (!cmd) { + pr_debug("no command\n"); +- return; ++ return 1; + } + + data = cmd->data; + if (!data) { + pr_debug("no data\n"); +- return; ++ return 1; + } + + while (host->in_use_index < host->transfer_index) { +@@ -300,39 +302,14 @@ + + /* Is there another transfer to trigger? */ + if (host->transfer_index < data->sg_len) +- at91mci_pre_dma_read(host); ++ at91_mci_pre_dma_read(host); + else { ++ at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX); + at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF); +- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); + } + + pr_debug("post dma read done\n"); +-} +- +-/* +- * Handle transmitted data +- */ +-static void at91_mci_handle_transmitted(struct at91mci_host *host) +-{ +- struct mmc_command *cmd; +- struct mmc_data *data; +- +- pr_debug("Handling the transmit\n"); +- +- /* Disable the transfer */ +- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); +- +- /* Now wait for cmd ready */ +- at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE); +- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); +- +- cmd = host->cmd; +- if (!cmd) return; +- +- data = cmd->data; +- if (!data) return; +- +- data->bytes_xfered = host->total_length; ++ return completed; + } + + /* +@@ -340,10 +317,17 @@ + */ + static void at91_mci_enable(struct at91mci_host *host) + { ++ unsigned int mr; ++ + at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); + at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); +- at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a); ++ mr = AT91_MCI_PDCMODE | 0x34a; ++ ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; ++ ++ at91_mci_write(host, AT91_MCI_MR, mr); + + /* use Slot A or B (only one at same time) */ + at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b); +@@ -359,9 +343,8 @@ + + /* + * Send a command +- * return the interrupts to enable + */ +-static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd) ++static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd) + { + unsigned int cmdr, mr; + unsigned int block_length; +@@ -372,8 +355,7 @@ + + host->cmd = cmd; + +- /* Not sure if this is needed */ +-#if 0 ++ /* Needed for leaving busy state before CMD1 */ + if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) { + pr_debug("Clearing timeout\n"); + at91_mci_write(host, AT91_MCI_ARGR, 0); +@@ -383,7 +365,7 @@ + pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR)); + } + } +-#endif ++ + cmdr = cmd->opcode; + + if (mmc_resp_type(cmd) == MMC_RSP_NONE) +@@ -440,50 +422,48 @@ + at91_mci_write(host, ATMEL_PDC_TCR, 0); + at91_mci_write(host, ATMEL_PDC_TNPR, 0); + at91_mci_write(host, ATMEL_PDC_TNCR, 0); ++ ier = AT91_MCI_CMDRDY; ++ } else { ++ /* zero block length in PDC mode */ ++ mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; ++ at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE); ++ ++ /* ++ * Disable the PDC controller ++ */ ++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); + +- at91_mci_write(host, AT91_MCI_ARGR, cmd->arg); +- at91_mci_write(host, AT91_MCI_CMDR, cmdr); +- return AT91_MCI_CMDRDY; +- } +- +- mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; /* zero block length and PDC mode */ +- at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE); +- +- /* +- * Disable the PDC controller +- */ +- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); +- +- if (cmdr & AT91_MCI_TRCMD_START) { +- data->bytes_xfered = 0; +- host->transfer_index = 0; +- host->in_use_index = 0; +- if (cmdr & AT91_MCI_TRDIR) { +- /* +- * Handle a read +- */ +- host->buffer = NULL; +- host->total_length = 0; ++ if (cmdr & AT91_MCI_TRCMD_START) { ++ data->bytes_xfered = 0; ++ host->transfer_index = 0; ++ host->in_use_index = 0; ++ if (cmdr & AT91_MCI_TRDIR) { ++ /* ++ * Handle a read ++ */ ++ host->buffer = NULL; ++ host->total_length = 0; + +- at91mci_pre_dma_read(host); +- ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */; +- } +- else { +- /* +- * Handle a write +- */ +- host->total_length = block_length * blocks; +- host->buffer = dma_alloc_coherent(NULL, +- host->total_length, +- &host->physical_address, GFP_KERNEL); +- +- at91mci_sg_to_dma(host, data); +- +- pr_debug("Transmitting %d bytes\n", host->total_length); +- +- at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); +- at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4); +- ier = AT91_MCI_TXBUFE; ++ at91_mci_pre_dma_read(host); ++ ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */; ++ } ++ else { ++ /* ++ * Handle a write ++ */ ++ host->total_length = block_length * blocks; ++ host->buffer = dma_alloc_coherent(NULL, ++ host->total_length, ++ &host->physical_address, GFP_KERNEL); ++ ++ at91_mci_sg_to_dma(host, data); ++ ++ pr_debug("Transmitting %d bytes\n", host->total_length); ++ ++ at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); ++ at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4); ++ ier = AT91_MCI_CMDRDY; ++ } + } + } + +@@ -498,39 +478,24 @@ + if (cmdr & AT91_MCI_TRCMD_START) { + if (cmdr & AT91_MCI_TRDIR) + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); +- else +- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); + } +- return ier; +-} + +-/* +- * Wait for a command to complete +- */ +-static void at91mci_process_command(struct at91mci_host *host, struct mmc_command *cmd) +-{ +- unsigned int ier; +- +- ier = at91_mci_send_command(host, cmd); +- +- pr_debug("setting ier to %08X\n", ier); +- +- /* Stop on errors or the required value */ ++ /* Enable selected interrupts */ + at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier); + } + + /* + * Process the next step in the request + */ +-static void at91mci_process_next(struct at91mci_host *host) ++static void at91_mci_process_next(struct at91mci_host *host) + { + if (!(host->flags & FL_SENT_COMMAND)) { + host->flags |= FL_SENT_COMMAND; +- at91mci_process_command(host, host->request->cmd); ++ at91_mci_send_command(host, host->request->cmd); + } + else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) { + host->flags |= FL_SENT_STOP; +- at91mci_process_command(host, host->request->stop); ++ at91_mci_send_command(host, host->request->stop); + } + else + mmc_request_done(host->mmc, host->request); +@@ -539,7 +504,7 @@ + /* + * Handle a command that has been completed + */ +-static void at91mci_completed_command(struct at91mci_host *host) ++static void at91_mci_completed_command(struct at91mci_host *host) + { + struct mmc_command *cmd = host->cmd; + unsigned int status; +@@ -583,7 +548,7 @@ + else + cmd->error = MMC_ERR_NONE; + +- at91mci_process_next(host); ++ at91_mci_process_next(host); + } + + /* +@@ -595,7 +560,60 @@ + host->request = mrq; + host->flags = 0; + +- at91mci_process_next(host); ++ at91_mci_process_next(host); ++} ++ ++/* ++ * Handle transmitted data ++ */ ++static void at91_mci_handle_transmitted(struct at91mci_host *host) ++{ ++ struct mmc_command *cmd; ++ struct mmc_data *data; ++ ++ pr_debug("Handling the transmit\n"); ++ ++ /* Disable the transfer */ ++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); ++ ++ /* Now wait for cmd ready */ ++ at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE); ++ ++ cmd = host->cmd; ++ if (!cmd) return; ++ ++ data = cmd->data; ++ if (!data) return; ++ ++ if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) { ++ pr_debug("multiple write : wait for BLKE...\n"); ++ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE); ++ } else ++ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); ++ ++ data->bytes_xfered = host->total_length; ++} ++ ++ ++/*Handle after command sent ready*/ ++static int at91_mci_handle_cmdrdy(struct at91mci_host *host) ++{ ++ if (!host->cmd) ++ return 1; ++ else if (!host->cmd->data) { ++ if (host->flags & FL_SENT_STOP) { ++ /*After multi block write, we mus wait for NOTBUSY*/ ++ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); ++ } else return 1; ++ } else if (host->cmd->data->flags & MMC_DATA_WRITE) { ++ /*After sending multi-block-write command, start DMA transfer*/ ++ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE); ++ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE); ++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); ++ } ++ ++ /* command not completed, have to wait */ ++ return 0; + } + + /* +@@ -698,29 +716,33 @@ + at91_mci_handle_transmitted(host); + } + ++ if (int_status & AT91_MCI_ENDRX) { ++ pr_debug("ENDRX\n"); ++ at91_mci_post_dma_read(host); ++ } ++ + if (int_status & AT91_MCI_RXBUFF) { + pr_debug("RX buffer full\n"); +- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY); ++ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); ++ at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_RXBUFF | AT91_MCI_ENDRX); ++ completed = 1; + } + + if (int_status & AT91_MCI_ENDTX) + pr_debug("Transmit has ended\n"); + +- if (int_status & AT91_MCI_ENDRX) { +- pr_debug("Receive has ended\n"); +- at91mci_post_dma_read(host); +- } +- + if (int_status & AT91_MCI_NOTBUSY) { + pr_debug("Card is ready\n"); +- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY); ++ completed = 1; + } + + if (int_status & AT91_MCI_DTIP) + pr_debug("Data transfer in progress\n"); + +- if (int_status & AT91_MCI_BLKE) ++ if (int_status & AT91_MCI_BLKE) { + pr_debug("Block transfer has ended\n"); ++ completed = 1; ++ } + + if (int_status & AT91_MCI_TXRDY) + pr_debug("Ready to transmit\n"); +@@ -730,14 +752,14 @@ + + if (int_status & AT91_MCI_CMDRDY) { + pr_debug("Command ready\n"); +- completed = 1; ++ completed = at91_mci_handle_cmdrdy(host); + } + } + + if (completed) { + pr_debug("Completed command\n"); + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); +- at91mci_completed_command(host); ++ at91_mci_completed_command(host); + } else + at91_mci_write(host, AT91_MCI_IDR, int_status); + diff --git a/target/linux/at91/patches-2.6.21/013-at91-mmc1wire.patch b/target/linux/at91/patches-2.6.21/013-at91-mmc1wire.patch new file mode 100644 index 0000000..31b1e96 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/013-at91-mmc1wire.patch @@ -0,0 +1,12 @@ +--- linux-2.6.21.1.old/drivers/mmc/at91_mci.c 2007-06-05 11:08:39.000000000 +0200 ++++ linux-2.6.21.1/drivers/mmc/at91_mci.c 2007-06-05 11:28:40.000000000 +0200 +@@ -79,8 +79,7 @@ + + #define DRIVER_NAME "at91_mci" + +-//#undef SUPPORT_4WIRE +-#define SUPPORT_4WIRE ++#undef SUPPORT_4WIRE + + #define FL_SENT_COMMAND (1 << 0) + #define FL_SENT_STOP (1 << 1) diff --git a/target/linux/at91/patches-2.6.21/014-initpartition.patch b/target/linux/at91/patches-2.6.21/014-initpartition.patch new file mode 100644 index 0000000..7e78e64 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/014-initpartition.patch @@ -0,0 +1,18 @@ +--- linux-2.6.21.5.old/drivers/mtd/devices/at91_dataflash.c 2007-06-13 13:31:24.000000000 +0200 ++++ linux-2.6.21.5/drivers/mtd/devices/at91_dataflash.c 2007-06-19 12:49:48.000000000 +0200 +@@ -161,12 +161,12 @@ + .mask_flags = MTD_WRITEABLE, /* read-only */ + }, + { +- .name = "kernel", ++ .name = "knlroot", + .offset = MTDPART_OFS_NXTBLK, +- .size = 5 * 32 * 8 * 1056, /* 5 sectors */ ++ .size = 0x320400, /* 5 sectors */ + }, + { +- .name = "filesystem", ++ .name = "jffs2", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */ + } diff --git a/target/linux/at91/patches-2.6.22/000-at91.patch b/target/linux/at91/patches-2.6.22/000-at91.patch new file mode 100644 index 0000000..16ab784 --- /dev/null +++ b/target/linux/at91/patches-2.6.22/000-at91.patch @@ -0,0 +1,9932 @@ +diff -urN linux-2.6.22-rc5/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.22-rc5.new/arch/arm/boot/compressed/head-at91rm9200.S +--- linux-2.6.22-rc5/arch/arm/boot/compressed/head-at91rm9200.S 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 05:23:04.000000000 +0200 +@@ -73,6 +73,12 @@ + cmp r7, r3 + beq 99f + ++ @ Promwad Chub : 1181 ++ mov r3, #(MACH_TYPE_CHUB & 0xff) ++ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00) ++ cmp r7, r3 ++ beq 99f ++ + @ Unknown board, use the AT91RM9200DK board + @ mov r7, #MACH_TYPE_AT91RM9200 + mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) +diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9260ek_defconfig +--- linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9260ek_defconfig 2007-07-29 05:23:04.000000000 +0200 +@@ -1,18 +1,24 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.19-rc6 +-# Fri Nov 17 18:42:21 2006 ++# Linux kernel version: 2.6.21 ++# Mon May 7 11:42:02 2007 + # + CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y + # CONFIG_GENERIC_TIME is not set + CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set + CONFIG_GENERIC_HARDIRQS=y + CONFIG_TRACE_IRQFLAGS_SUPPORT=y + CONFIG_HARDIRQS_SW_RESEND=y + CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set + CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y + CONFIG_VECTORS_BASE=0xffff0000 + CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +@@ -31,13 +37,16 @@ + # CONFIG_SWAP is not set + CONFIG_SYSVIPC=y + # CONFIG_IPC_NS is not set ++CONFIG_SYSVIPC_SYSCTL=y + # CONFIG_POSIX_MQUEUE is not set + # CONFIG_BSD_PROCESS_ACCT is not set + # CONFIG_TASKSTATS is not set + # CONFIG_UTS_NS is not set + # CONFIG_AUDIT is not set + # CONFIG_IKCONFIG is not set ++CONFIG_SYSFS_DEPRECATED=y + # CONFIG_RELAY is not set ++CONFIG_BLK_DEV_INITRD=y + CONFIG_INITRAMFS_SOURCE="" + CONFIG_CC_OPTIMIZE_FOR_SIZE=y + CONFIG_SYSCTL=y +@@ -76,7 +85,9 @@ + # Block layer + # + CONFIG_BLOCK=y ++# CONFIG_LBD is not set + # CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set + + # + # IO Schedulers +@@ -110,10 +121,12 @@ + # CONFIG_ARCH_IMX is not set + # CONFIG_ARCH_IOP32X is not set + # CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IOP13XX is not set + # CONFIG_ARCH_IXP4XX is not set + # CONFIG_ARCH_IXP2000 is not set + # CONFIG_ARCH_IXP23XX is not set + # CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_NS9XXX is not set + # CONFIG_ARCH_PNX4008 is not set + # CONFIG_ARCH_PXA is not set + # CONFIG_ARCH_RPC is not set +@@ -129,21 +142,29 @@ + # CONFIG_ARCH_AT91RM9200 is not set + CONFIG_ARCH_AT91SAM9260=y + # CONFIG_ARCH_AT91SAM9261 is not set ++# CONFIG_ARCH_AT91SAM9263 is not set ++ ++# ++# AT91SAM9260 Variants ++# ++# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set + + # +-# AT91SAM9260 Board Type ++# AT91SAM9260 / AT91SAM9XE Board Type + # + CONFIG_MACH_AT91SAM9260EK=y + + # + # AT91 Board Options + # ++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set + + # + # AT91 Feature Selections + # + # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set ++# CONFIG_ATMEL_TCLIB is not set + + # + # Processor Type +@@ -166,6 +187,7 @@ + # CONFIG_CPU_DCACHE_DISABLE is not set + # CONFIG_CPU_DCACHE_WRITETHROUGH is not set + # CONFIG_CPU_CACHE_ROUND_ROBIN is not set ++# CONFIG_OUTER_CACHE is not set + + # + # Bus support +@@ -193,6 +215,7 @@ + # CONFIG_SPARSEMEM_STATIC is not set + CONFIG_SPLIT_PTLOCK_CPUS=4096 + # CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 + # CONFIG_LEDS is not set + CONFIG_ALIGNMENT_TRAP=y + +@@ -203,6 +226,7 @@ + CONFIG_ZBOOT_ROM_BSS=0x0 + CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" + # CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set + + # + # Floating point emulation +@@ -228,7 +252,6 @@ + # Power management options + # + # CONFIG_PM is not set +-# CONFIG_APM is not set + + # + # Networking +@@ -242,9 +265,6 @@ + CONFIG_PACKET=y + # CONFIG_PACKET_MMAP is not set + CONFIG_UNIX=y +-CONFIG_XFRM=y +-# CONFIG_XFRM_USER is not set +-# CONFIG_XFRM_SUB_POLICY is not set + # CONFIG_NET_KEY is not set + CONFIG_INET=y + # CONFIG_IP_MULTICAST is not set +@@ -263,14 +283,15 @@ + # CONFIG_INET_IPCOMP is not set + # CONFIG_INET_XFRM_TUNNEL is not set + # CONFIG_INET_TUNNEL is not set +-CONFIG_INET_XFRM_MODE_TRANSPORT=y +-CONFIG_INET_XFRM_MODE_TUNNEL=y +-CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set + CONFIG_INET_DIAG=y + CONFIG_INET_TCP_DIAG=y + # CONFIG_TCP_CONG_ADVANCED is not set + CONFIG_TCP_CONG_CUBIC=y + CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set + # CONFIG_IPV6 is not set + # CONFIG_INET6_XFRM_TUNNEL is not set + # CONFIG_INET6_TUNNEL is not set +@@ -328,6 +349,7 @@ + CONFIG_PREVENT_FIRMWARE_BUILD=y + # CONFIG_FW_LOADER is not set + # CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set + # CONFIG_SYS_HYPERVISOR is not set + + # +@@ -348,6 +370,7 @@ + # + # Plug and Play support + # ++# CONFIG_PNPACPI is not set + + # + # Block devices +@@ -360,7 +383,6 @@ + CONFIG_BLK_DEV_RAM_COUNT=16 + CONFIG_BLK_DEV_RAM_SIZE=8192 + CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +-CONFIG_BLK_DEV_INITRD=y + # CONFIG_CDROM_PKTCDVD is not set + # CONFIG_ATA_OVER_ETH is not set + +@@ -369,6 +391,7 @@ + # + # CONFIG_RAID_ATTRS is not set + CONFIG_SCSI=y ++# CONFIG_SCSI_TGT is not set + # CONFIG_SCSI_NETLINK is not set + CONFIG_SCSI_PROC_FS=y + +@@ -388,6 +411,7 @@ + CONFIG_SCSI_MULTI_LUN=y + # CONFIG_SCSI_CONSTANTS is not set + # CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set + + # + # SCSI Transports +@@ -405,6 +429,11 @@ + # CONFIG_SCSI_DEBUG is not set + + # ++# Serial ATA (prod) and Parallel ATA (experimental) drivers ++# ++# CONFIG_ATA is not set ++ ++# + # Multi-device support (RAID and LVM) + # + # CONFIG_MD is not set +@@ -425,7 +454,51 @@ + # + # Network device support + # +-# CONFIG_NETDEVICES is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++ ++# ++# PHY device support ++# ++# CONFIG_PHYLIB is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++CONFIG_MACB=y ++# CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set ++ ++# ++# Ethernet (1000 Mbit) ++# ++ ++# ++# Ethernet (10000 Mbit) ++# ++ ++# ++# Token Ring devices ++# ++ ++# ++# Wireless LAN (non-hamradio) ++# ++# CONFIG_NET_RADIO is not set ++ ++# ++# Wan interfaces ++# ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set + # CONFIG_NETPOLL is not set + # CONFIG_NET_POLL_CONTROLLER is not set + +@@ -517,10 +590,6 @@ + # CONFIG_NVRAM is not set + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set +- +-# +-# Ftape, the floppy tape device driver +-# + # CONFIG_RAW_DRIVER is not set + + # +@@ -553,7 +622,11 @@ + # + # Misc devices + # +-# CONFIG_TIFM_CORE is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set + + # + # LED devices +@@ -582,7 +655,7 @@ + # + # Graphics support + # +-# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + # CONFIG_FB is not set + + # +@@ -590,7 +663,6 @@ + # + # CONFIG_VGA_CONSOLE is not set + CONFIG_DUMMY_CONSOLE=y +-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + + # + # Sound +@@ -598,6 +670,12 @@ + # CONFIG_SOUND is not set + + # ++# HID Devices ++# ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++ ++# + # USB support + # + CONFIG_USB_ARCH_HAS_HCD=y +@@ -610,7 +688,6 @@ + # Miscellaneous USB options + # + CONFIG_USB_DEVICEFS=y +-# CONFIG_USB_BANDWIDTH is not set + # CONFIG_USB_DYNAMIC_MINORS is not set + # CONFIG_USB_OTG is not set + +@@ -619,7 +696,8 @@ + # + # CONFIG_USB_ISP116X_HCD is not set + CONFIG_USB_OHCI_HCD=y +-# CONFIG_USB_OHCI_BIG_ENDIAN is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set + CONFIG_USB_OHCI_LITTLE_ENDIAN=y + # CONFIG_USB_SL811_HCD is not set + +@@ -671,6 +749,7 @@ + # CONFIG_USB_ATI_REMOTE2 is not set + # CONFIG_USB_KEYSPAN_REMOTE is not set + # CONFIG_USB_APPLETOUCH is not set ++# CONFIG_USB_GTCO is not set + + # + # USB Imaging devices +@@ -708,6 +787,7 @@ + # CONFIG_USB_RIO500 is not set + # CONFIG_USB_LEGOTOWER is not set + # CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set + # CONFIG_USB_LED is not set + # CONFIG_USB_CYPRESS_CY7C63 is not set + # CONFIG_USB_CYTHERM is not set +@@ -717,6 +797,7 @@ + # CONFIG_USB_APPLEDISPLAY is not set + # CONFIG_USB_LD is not set + # CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set + # CONFIG_USB_TEST is not set + + # +@@ -889,6 +970,11 @@ + # CONFIG_NLS_UTF8 is not set + + # ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# + # Profiling support + # + # CONFIG_PROFILING is not set +@@ -900,28 +986,30 @@ + CONFIG_ENABLE_MUST_CHECK=y + # CONFIG_MAGIC_SYSRQ is not set + # CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set + CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set + CONFIG_LOG_BUF_SHIFT=14 + CONFIG_DETECT_SOFTLOCKUP=y + # CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set + # CONFIG_DEBUG_SLAB is not set + # CONFIG_DEBUG_RT_MUTEXES is not set + # CONFIG_RT_MUTEX_TESTER is not set + # CONFIG_DEBUG_SPINLOCK is not set + # CONFIG_DEBUG_MUTEXES is not set +-# CONFIG_DEBUG_RWSEMS is not set + # CONFIG_DEBUG_SPINLOCK_SLEEP is not set + # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set + # CONFIG_DEBUG_KOBJECT is not set + CONFIG_DEBUG_BUGVERBOSE=y + # CONFIG_DEBUG_INFO is not set +-# CONFIG_DEBUG_FS is not set + # CONFIG_DEBUG_VM is not set + # CONFIG_DEBUG_LIST is not set + CONFIG_FRAME_POINTER=y + CONFIG_FORCED_INLINING=y +-# CONFIG_HEADERS_CHECK is not set + # CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_FAULT_INJECTION is not set + CONFIG_DEBUG_USER=y + # CONFIG_DEBUG_ERRORS is not set + CONFIG_DEBUG_LL=y +@@ -941,9 +1029,12 @@ + # + # Library routines + # ++CONFIG_BITREVERSE=y + # CONFIG_CRC_CCITT is not set + # CONFIG_CRC16 is not set + CONFIG_CRC32=y + # CONFIG_LIBCRC32C is not set + CONFIG_ZLIB_INFLATE=y + CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y +diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9261ek_defconfig +--- linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9261ek_defconfig 2007-07-29 05:23:04.000000000 +0200 +@@ -1,18 +1,24 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.19-rc6 +-# Fri Nov 17 18:00:38 2006 ++# Linux kernel version: 2.6.21 ++# Mon May 7 11:42:30 2007 + # + CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y + # CONFIG_GENERIC_TIME is not set + CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set + CONFIG_GENERIC_HARDIRQS=y + CONFIG_TRACE_IRQFLAGS_SUPPORT=y + CONFIG_HARDIRQS_SW_RESEND=y + CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set + CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y + CONFIG_VECTORS_BASE=0xffff0000 + CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +@@ -31,13 +37,16 @@ + # CONFIG_SWAP is not set + CONFIG_SYSVIPC=y + # CONFIG_IPC_NS is not set ++CONFIG_SYSVIPC_SYSCTL=y + # CONFIG_POSIX_MQUEUE is not set + # CONFIG_BSD_PROCESS_ACCT is not set + # CONFIG_TASKSTATS is not set + # CONFIG_UTS_NS is not set + # CONFIG_AUDIT is not set + # CONFIG_IKCONFIG is not set ++CONFIG_SYSFS_DEPRECATED=y + # CONFIG_RELAY is not set ++CONFIG_BLK_DEV_INITRD=y + CONFIG_INITRAMFS_SOURCE="" + CONFIG_CC_OPTIMIZE_FOR_SIZE=y + CONFIG_SYSCTL=y +@@ -76,7 +85,9 @@ + # Block layer + # + CONFIG_BLOCK=y ++# CONFIG_LBD is not set + # CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set + + # + # IO Schedulers +@@ -110,10 +121,12 @@ + # CONFIG_ARCH_IMX is not set + # CONFIG_ARCH_IOP32X is not set + # CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IOP13XX is not set + # CONFIG_ARCH_IXP4XX is not set + # CONFIG_ARCH_IXP2000 is not set + # CONFIG_ARCH_IXP23XX is not set + # CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_NS9XXX is not set + # CONFIG_ARCH_PNX4008 is not set + # CONFIG_ARCH_PXA is not set + # CONFIG_ARCH_RPC is not set +@@ -129,6 +142,7 @@ + # CONFIG_ARCH_AT91RM9200 is not set + # CONFIG_ARCH_AT91SAM9260 is not set + CONFIG_ARCH_AT91SAM9261=y ++# CONFIG_ARCH_AT91SAM9263 is not set + + # + # AT91SAM9261 Board Type +@@ -138,12 +152,14 @@ + # + # AT91 Board Options + # ++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set + + # + # AT91 Feature Selections + # + # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set ++# CONFIG_ATMEL_TCLIB is not set + + # + # Processor Type +@@ -166,6 +182,7 @@ + # CONFIG_CPU_DCACHE_DISABLE is not set + # CONFIG_CPU_DCACHE_WRITETHROUGH is not set + # CONFIG_CPU_CACHE_ROUND_ROBIN is not set ++# CONFIG_OUTER_CACHE is not set + + # + # Bus support +@@ -193,6 +210,7 @@ + # CONFIG_SPARSEMEM_STATIC is not set + CONFIG_SPLIT_PTLOCK_CPUS=4096 + # CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 + # CONFIG_LEDS is not set + CONFIG_ALIGNMENT_TRAP=y + +@@ -203,6 +221,7 @@ + CONFIG_ZBOOT_ROM_BSS=0x0 + CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" + # CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set + + # + # Floating point emulation +@@ -228,7 +247,6 @@ + # Power management options + # + # CONFIG_PM is not set +-# CONFIG_APM is not set + + # + # Networking +@@ -245,6 +263,7 @@ + CONFIG_XFRM=y + # CONFIG_XFRM_USER is not set + # CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set + # CONFIG_NET_KEY is not set + CONFIG_INET=y + # CONFIG_IP_MULTICAST is not set +@@ -271,6 +290,7 @@ + # CONFIG_TCP_CONG_ADVANCED is not set + CONFIG_TCP_CONG_CUBIC=y + CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set + # CONFIG_IPV6 is not set + # CONFIG_INET6_XFRM_TUNNEL is not set + # CONFIG_INET6_TUNNEL is not set +@@ -328,6 +348,7 @@ + CONFIG_PREVENT_FIRMWARE_BUILD=y + # CONFIG_FW_LOADER is not set + # CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set + # CONFIG_SYS_HYPERVISOR is not set + + # +@@ -350,6 +371,7 @@ + # User Modules And Translation Layers + # + # CONFIG_MTD_CHAR is not set ++CONFIG_MTD_BLKDEVS=y + CONFIG_MTD_BLOCK=y + # CONFIG_FTL is not set + # CONFIG_NFTL is not set +@@ -386,6 +408,8 @@ + # + # Self-contained MTD device drivers + # ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set + # CONFIG_MTD_SLRAM is not set + # CONFIG_MTD_PHRAM is not set + # CONFIG_MTD_MTDRAM is not set +@@ -422,6 +446,7 @@ + # + # Plug and Play support + # ++# CONFIG_PNPACPI is not set + + # + # Block devices +@@ -434,7 +459,6 @@ + CONFIG_BLK_DEV_RAM_COUNT=16 + CONFIG_BLK_DEV_RAM_SIZE=8192 + CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +-CONFIG_BLK_DEV_INITRD=y + # CONFIG_CDROM_PKTCDVD is not set + # CONFIG_ATA_OVER_ETH is not set + +@@ -443,6 +467,7 @@ + # + # CONFIG_RAID_ATTRS is not set + CONFIG_SCSI=y ++# CONFIG_SCSI_TGT is not set + # CONFIG_SCSI_NETLINK is not set + CONFIG_SCSI_PROC_FS=y + +@@ -462,6 +487,7 @@ + CONFIG_SCSI_MULTI_LUN=y + # CONFIG_SCSI_CONSTANTS is not set + # CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set + + # + # SCSI Transports +@@ -479,6 +505,11 @@ + # CONFIG_SCSI_DEBUG is not set + + # ++# Serial ATA (prod) and Parallel ATA (experimental) drivers ++# ++# CONFIG_ATA is not set ++ ++# + # Multi-device support (RAID and LVM) + # + # CONFIG_MD is not set +@@ -575,7 +606,16 @@ + # CONFIG_INPUT_KEYBOARD is not set + # CONFIG_INPUT_MOUSE is not set + # CONFIG_INPUT_JOYSTICK is not set +-# CONFIG_INPUT_TOUCHSCREEN is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=y ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_UCB1400 is not set + # CONFIG_INPUT_MISC is not set + + # +@@ -634,10 +674,6 @@ + # CONFIG_NVRAM is not set + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set +- +-# +-# Ftape, the floppy tape device driver +-# + # CONFIG_RAW_DRIVER is not set + + # +@@ -662,6 +698,7 @@ + # I2C Hardware Bus support + # + CONFIG_I2C_AT91=y ++CONFIG_I2C_AT91_CLOCKRATE=100000 + # CONFIG_I2C_OCORES is not set + # CONFIG_I2C_PARPORT_LIGHT is not set + # CONFIG_I2C_STUB is not set +@@ -686,8 +723,20 @@ + # + # SPI support + # +-# CONFIG_SPI is not set +-# CONFIG_SPI_MASTER is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++CONFIG_SPI_ATMEL=y ++# CONFIG_SPI_BITBANG is not set ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set + + # + # Dallas's 1-wire bus +@@ -703,7 +752,11 @@ + # + # Misc devices + # +-# CONFIG_TIFM_CORE is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set + + # + # LED devices +@@ -732,7 +785,7 @@ + # + # Graphics support + # +-# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + # CONFIG_FB is not set + + # +@@ -740,7 +793,6 @@ + # + # CONFIG_VGA_CONSOLE is not set + CONFIG_DUMMY_CONSOLE=y +-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + + # + # Sound +@@ -748,6 +800,12 @@ + # CONFIG_SOUND is not set + + # ++# HID Devices ++# ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++ ++# + # USB support + # + CONFIG_USB_ARCH_HAS_HCD=y +@@ -760,7 +818,6 @@ + # Miscellaneous USB options + # + CONFIG_USB_DEVICEFS=y +-# CONFIG_USB_BANDWIDTH is not set + # CONFIG_USB_DYNAMIC_MINORS is not set + # CONFIG_USB_OTG is not set + +@@ -769,7 +826,8 @@ + # + # CONFIG_USB_ISP116X_HCD is not set + CONFIG_USB_OHCI_HCD=y +-# CONFIG_USB_OHCI_BIG_ENDIAN is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set + CONFIG_USB_OHCI_LITTLE_ENDIAN=y + # CONFIG_USB_SL811_HCD is not set + +@@ -821,6 +879,7 @@ + # CONFIG_USB_ATI_REMOTE2 is not set + # CONFIG_USB_KEYSPAN_REMOTE is not set + # CONFIG_USB_APPLETOUCH is not set ++# CONFIG_USB_GTCO is not set + + # + # USB Imaging devices +@@ -858,6 +917,7 @@ + # CONFIG_USB_RIO500 is not set + # CONFIG_USB_LEGOTOWER is not set + # CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set + # CONFIG_USB_LED is not set + # CONFIG_USB_CYPRESS_CY7C63 is not set + # CONFIG_USB_CYTHERM is not set +@@ -867,6 +927,7 @@ + # CONFIG_USB_APPLEDISPLAY is not set + # CONFIG_USB_LD is not set + # CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set + # CONFIG_USB_TEST is not set + + # +@@ -903,7 +964,6 @@ + # CONFIG_MMC_DEBUG is not set + CONFIG_MMC_BLOCK=y + CONFIG_MMC_AT91=m +-# CONFIG_MMC_TIFM_SD is not set + + # + # Real Time Clock +@@ -973,7 +1033,6 @@ + # CONFIG_BEFS_FS is not set + # CONFIG_BFS_FS is not set + # CONFIG_EFS_FS is not set +-# CONFIG_JFFS_FS is not set + # CONFIG_JFFS2_FS is not set + CONFIG_CRAMFS=y + # CONFIG_VXFS_FS is not set +@@ -1045,6 +1104,11 @@ + # CONFIG_NLS_UTF8 is not set + + # ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# + # Profiling support + # + # CONFIG_PROFILING is not set +@@ -1056,28 +1120,30 @@ + CONFIG_ENABLE_MUST_CHECK=y + # CONFIG_MAGIC_SYSRQ is not set + # CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set + CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set + CONFIG_LOG_BUF_SHIFT=14 + CONFIG_DETECT_SOFTLOCKUP=y + # CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set + # CONFIG_DEBUG_SLAB is not set + # CONFIG_DEBUG_RT_MUTEXES is not set + # CONFIG_RT_MUTEX_TESTER is not set + # CONFIG_DEBUG_SPINLOCK is not set + # CONFIG_DEBUG_MUTEXES is not set +-# CONFIG_DEBUG_RWSEMS is not set + # CONFIG_DEBUG_SPINLOCK_SLEEP is not set + # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set + # CONFIG_DEBUG_KOBJECT is not set + CONFIG_DEBUG_BUGVERBOSE=y + # CONFIG_DEBUG_INFO is not set +-# CONFIG_DEBUG_FS is not set + # CONFIG_DEBUG_VM is not set + # CONFIG_DEBUG_LIST is not set + CONFIG_FRAME_POINTER=y + CONFIG_FORCED_INLINING=y +-# CONFIG_HEADERS_CHECK is not set + # CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_FAULT_INJECTION is not set + CONFIG_DEBUG_USER=y + # CONFIG_DEBUG_ERRORS is not set + CONFIG_DEBUG_LL=y +@@ -1097,9 +1163,12 @@ + # + # Library routines + # ++CONFIG_BITREVERSE=y + # CONFIG_CRC_CCITT is not set + # CONFIG_CRC16 is not set + CONFIG_CRC32=y + # CONFIG_LIBCRC32C is not set + CONFIG_ZLIB_INFLATE=y + CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y +diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9263ek_defconfig +--- linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9263ek_defconfig 2007-07-29 05:23:04.000000000 +0200 +@@ -1,11 +1,14 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.20-rc1 +-# Mon Jan 8 16:06:54 2007 ++# Linux kernel version: 2.6.21 ++# Mon May 7 11:42:49 2007 + # + CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y + # CONFIG_GENERIC_TIME is not set + CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set + CONFIG_GENERIC_HARDIRQS=y + CONFIG_TRACE_IRQFLAGS_SUPPORT=y + CONFIG_HARDIRQS_SW_RESEND=y +@@ -15,6 +18,7 @@ + # CONFIG_ARCH_HAS_ILOG2_U64 is not set + CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y + CONFIG_VECTORS_BASE=0xffff0000 + CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +@@ -33,6 +37,7 @@ + # CONFIG_SWAP is not set + CONFIG_SYSVIPC=y + # CONFIG_IPC_NS is not set ++CONFIG_SYSVIPC_SYSCTL=y + # CONFIG_POSIX_MQUEUE is not set + # CONFIG_BSD_PROCESS_ACCT is not set + # CONFIG_TASKSTATS is not set +@@ -41,6 +46,7 @@ + # CONFIG_IKCONFIG is not set + CONFIG_SYSFS_DEPRECATED=y + # CONFIG_RELAY is not set ++CONFIG_BLK_DEV_INITRD=y + CONFIG_INITRAMFS_SOURCE="" + CONFIG_CC_OPTIMIZE_FOR_SIZE=y + CONFIG_SYSCTL=y +@@ -120,6 +126,7 @@ + # CONFIG_ARCH_IXP2000 is not set + # CONFIG_ARCH_IXP23XX is not set + # CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_NS9XXX is not set + # CONFIG_ARCH_PNX4008 is not set + # CONFIG_ARCH_PXA is not set + # CONFIG_ARCH_RPC is not set +@@ -152,6 +159,7 @@ + # AT91 Feature Selections + # + # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set ++# CONFIG_ATMEL_TCLIB is not set + + # + # Processor Type +@@ -174,6 +182,7 @@ + # CONFIG_CPU_DCACHE_DISABLE is not set + # CONFIG_CPU_DCACHE_WRITETHROUGH is not set + # CONFIG_CPU_CACHE_ROUND_ROBIN is not set ++# CONFIG_OUTER_CACHE is not set + + # + # Bus support +@@ -201,6 +210,7 @@ + # CONFIG_SPARSEMEM_STATIC is not set + CONFIG_SPLIT_PTLOCK_CPUS=4096 + # CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 + # CONFIG_LEDS is not set + CONFIG_ALIGNMENT_TRAP=y + +@@ -211,6 +221,7 @@ + CONFIG_ZBOOT_ROM_BSS=0x0 + CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" + # CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set + + # + # Floating point emulation +@@ -236,7 +247,6 @@ + # Power management options + # + # CONFIG_PM is not set +-# CONFIG_APM is not set + + # + # Networking +@@ -333,6 +343,7 @@ + CONFIG_PREVENT_FIRMWARE_BUILD=y + # CONFIG_FW_LOADER is not set + # CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set + # CONFIG_SYS_HYPERVISOR is not set + + # +@@ -430,6 +441,7 @@ + # + # Plug and Play support + # ++# CONFIG_PNPACPI is not set + + # + # Block devices +@@ -443,7 +455,6 @@ + CONFIG_BLK_DEV_RAM_COUNT=16 + CONFIG_BLK_DEV_RAM_SIZE=8192 + CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +-CONFIG_BLK_DEV_INITRD=y + # CONFIG_CDROM_PKTCDVD is not set + # CONFIG_ATA_OVER_ETH is not set + +@@ -531,6 +542,7 @@ + # + CONFIG_NET_ETHERNET=y + CONFIG_MII=y ++CONFIG_MACB=y + # CONFIG_SMC91X is not set + # CONFIG_DM9000 is not set + +@@ -685,6 +697,7 @@ + # I2C Hardware Bus support + # + CONFIG_I2C_AT91=y ++CONFIG_I2C_AT91_CLOCKRATE=100000 + # CONFIG_I2C_OCORES is not set + # CONFIG_I2C_PARPORT_LIGHT is not set + # CONFIG_I2C_STUB is not set +@@ -722,6 +735,7 @@ + # + # SPI Protocol Masters + # ++# CONFIG_SPI_AT25 is not set + + # + # Dallas's 1-wire bus +@@ -737,7 +751,11 @@ + # + # Misc devices + # +-# CONFIG_TIFM_CORE is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set + + # + # LED devices +@@ -766,15 +784,23 @@ + # + # Graphics support + # +-# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set + # CONFIG_FB_CFB_FILLRECT is not set + # CONFIG_FB_CFB_COPYAREA is not set + # CONFIG_FB_CFB_IMAGEBLIT is not set ++# CONFIG_FB_SVGALIB is not set + # CONFIG_FB_MACMODES is not set + # CONFIG_FB_BACKLIGHT is not set + # CONFIG_FB_MODE_HELPERS is not set + # CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D15605 is not set + # CONFIG_FB_S1D13XXX is not set + # CONFIG_FB_VIRTUAL is not set + +@@ -789,7 +815,6 @@ + # Logo configuration + # + # CONFIG_LOGO is not set +-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + + # + # Sound +@@ -800,6 +825,7 @@ + # HID Devices + # + CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set + + # + # USB support +@@ -814,9 +840,7 @@ + # Miscellaneous USB options + # + CONFIG_USB_DEVICEFS=y +-# CONFIG_USB_BANDWIDTH is not set + # CONFIG_USB_DYNAMIC_MINORS is not set +-# CONFIG_USB_MULTITHREAD_PROBE is not set + # CONFIG_USB_OTG is not set + + # +@@ -824,7 +848,8 @@ + # + # CONFIG_USB_ISP116X_HCD is not set + CONFIG_USB_OHCI_HCD=y +-# CONFIG_USB_OHCI_BIG_ENDIAN is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set + CONFIG_USB_OHCI_LITTLE_ENDIAN=y + # CONFIG_USB_SL811_HCD is not set + +@@ -877,6 +902,7 @@ + # CONFIG_USB_ATI_REMOTE2 is not set + # CONFIG_USB_KEYSPAN_REMOTE is not set + # CONFIG_USB_APPLETOUCH is not set ++# CONFIG_USB_GTCO is not set + + # + # USB Imaging devices +@@ -914,6 +940,7 @@ + # CONFIG_USB_RIO500 is not set + # CONFIG_USB_LEGOTOWER is not set + # CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set + # CONFIG_USB_LED is not set + # CONFIG_USB_CYPRESS_CY7C63 is not set + # CONFIG_USB_CYTHERM is not set +@@ -923,6 +950,7 @@ + # CONFIG_USB_APPLEDISPLAY is not set + # CONFIG_USB_LD is not set + # CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set + # CONFIG_USB_TEST is not set + + # +@@ -959,7 +987,6 @@ + # CONFIG_MMC_DEBUG is not set + CONFIG_MMC_BLOCK=y + CONFIG_MMC_AT91=m +-# CONFIG_MMC_TIFM_SD is not set + + # + # Real Time Clock +@@ -1136,15 +1163,16 @@ + # CONFIG_DEBUG_FS is not set + # CONFIG_HEADERS_CHECK is not set + CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set + CONFIG_LOG_BUF_SHIFT=14 + CONFIG_DETECT_SOFTLOCKUP=y + # CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set + # CONFIG_DEBUG_SLAB is not set + # CONFIG_DEBUG_RT_MUTEXES is not set + # CONFIG_RT_MUTEX_TESTER is not set + # CONFIG_DEBUG_SPINLOCK is not set + # CONFIG_DEBUG_MUTEXES is not set +-# CONFIG_DEBUG_RWSEMS is not set + # CONFIG_DEBUG_SPINLOCK_SLEEP is not set + # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set + # CONFIG_DEBUG_KOBJECT is not set +@@ -1155,6 +1183,7 @@ + CONFIG_FRAME_POINTER=y + CONFIG_FORCED_INLINING=y + # CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_FAULT_INJECTION is not set + CONFIG_DEBUG_USER=y + # CONFIG_DEBUG_ERRORS is not set + CONFIG_DEBUG_LL=y +@@ -1180,5 +1209,7 @@ + CONFIG_CRC32=y + # CONFIG_LIBCRC32C is not set + CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y + CONFIG_PLIST=y +-CONFIG_IOMAP_COPY=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y +diff -urN linux-2.6.22-rc5/arch/arm/configs/cam60_defconfig linux-2.6.22-rc5.new/arch/arm/configs/cam60_defconfig +--- linux-2.6.22-rc5/arch/arm/configs/cam60_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/arch/arm/configs/cam60_defconfig 2007-07-29 05:23:04.000000000 +0200 +@@ -0,0 +1,954 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.20 ++# Tue May 1 21:06:33 2007 ++# ++CONFIG_ARM=y ++# CONFIG_GENERIC_TIME is not set ++CONFIG_MMU=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++# CONFIG_SWAP is not set ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++# CONFIG_AUDIT is not set ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_SYSFS_DEPRECATED=y ++# CONFIG_RELAY is not set ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SHMEM=y ++CONFIG_SLAB=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++# CONFIG_SLOB is not set ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++# CONFIG_KMOD is not set ++ ++# ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++# CONFIG_IOSCHED_DEADLINE is not set ++# CONFIG_IOSCHED_CFQ is not set ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++CONFIG_ARCH_AT91=y ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_CO285 is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_OMAP is not set ++ ++# ++# Atmel AT91 System-on-Chip ++# ++# CONFIG_ARCH_AT91RM9200 is not set ++CONFIG_ARCH_AT91SAM9260=y ++# CONFIG_ARCH_AT91SAM9261 is not set ++# CONFIG_ARCH_AT91SAM9263 is not set ++ ++# ++# AT91SAM9260 Board Type ++# ++# CONFIG_MACH_AT91SAM9260EK is not set ++CONFIG_MACH_CAM60=y ++ ++# ++# AT91 Board Options ++# ++ ++# ++# AT91 Feature Selections ++# ++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_ARM926T=y ++CONFIG_CPU_32v5=y ++CONFIG_CPU_ABRT_EV5TJ=y ++CONFIG_CPU_CACHE_VIVT=y ++CONFIG_CPU_COPY_V4WB=y ++CONFIG_CPU_TLB_V4WBI=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++# CONFIG_ARM_THUMB is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set ++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set ++ ++# ++# Bus support ++# ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++# CONFIG_PREEMPT is not set ++# CONFIG_NO_IDLE_HZ is not set ++CONFIG_HZ=100 ++# CONFIG_AEABI is not set ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4096 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x22000000 ++CONFIG_ZBOOT_ROM_BSS=0x20004000 ++# CONFIG_ZBOOT_ROM is not set ++CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock3 rootfstype=jffs2 mem=64M" ++# CONFIG_XIP_KERNEL is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++# CONFIG_VFP is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++# CONFIG_ARTHUR is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++# CONFIG_APM is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_NETDEBUG is not set ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++ ++# ++# DCCP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_DCCP is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++ ++# ++# TIPC Configuration (EXPERIMENTAL) ++# ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_IEEE80211 is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++# CONFIG_MTD_CFI_ADV_OPTIONS is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_CFI_INTELEXT is not set ++# CONFIG_MTD_CFI_AMDSTD is not set ++# CONFIG_MTD_CFI_STAA is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_OBSOLETE_CHIPS is not set ++ ++# ++# Mapping drivers for chip access ++# ++CONFIG_MTD_COMPLEX_MAPPINGS=y ++# CONFIG_MTD_PHYSMAP is not set ++# CONFIG_MTD_ARM_INTEGRATOR is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++CONFIG_MTD_DATAFLASH=y ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++# CONFIG_MTD_NAND is not set ++ ++# ++# OneNAND Flash Device Drivers ++# ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_COW_COMMON is not set ++# CONFIG_BLK_DEV_LOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++CONFIG_BLK_DEV_INITRD=y ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++# CONFIG_SCSI is not set ++# CONFIG_SCSI_NETLINK is not set ++ ++# ++# Serial ATA (prod) and Parallel ATA (experimental) drivers ++# ++# CONFIG_ATA is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++ ++# ++# I2O device support ++# ++ ++# ++# Network device support ++# ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++ ++# ++# PHY device support ++# ++# CONFIG_PHYLIB is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++CONFIG_MACB=y ++# CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set ++ ++# ++# Ethernet (1000 Mbit) ++# ++ ++# ++# Ethernet (10000 Mbit) ++# ++ ++# ++# Token Ring devices ++# ++ ++# ++# Wireless LAN (non-hamradio) ++# ++# CONFIG_NET_RADIO is not set ++ ++# ++# Wan interfaces ++# ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_TSDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_ATMEL=y ++CONFIG_SERIAL_ATMEL_CONSOLE=y ++# CONFIG_SERIAL_ATMEL_TTYAT is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++ ++# ++# Watchdog Cards ++# ++# CONFIG_WATCHDOG is not set ++# CONFIG_HW_RANDOM is not set ++# CONFIG_NVRAM is not set ++# CONFIG_DTLK is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++ ++# ++# I2C support ++# ++# CONFIG_I2C is not set ++ ++# ++# SPI support ++# ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++CONFIG_SPI_ATMEL=y ++# CONFIG_SPI_BITBANG is not set ++ ++# ++# SPI Protocol Masters ++# ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++ ++# ++# Hardware Monitoring support ++# ++# CONFIG_HWMON is not set ++# CONFIG_HWMON_VID is not set ++ ++# ++# Misc devices ++# ++# CONFIG_TIFM_CORE is not set ++ ++# ++# LED devices ++# ++# CONFIG_NEW_LEDS is not set ++ ++# ++# LED drivers ++# ++ ++# ++# LED Triggers ++# ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++ ++# ++# Digital Video Broadcasting Devices ++# ++# CONFIG_DVB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++ ++# ++# HID Devices ++# ++# CONFIG_HID is not set ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++# CONFIG_USB is not set ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# USB Gadget Support ++# ++# CONFIG_USB_GADGET is not set ++ ++# ++# MMC/SD Card support ++# ++# CONFIG_MMC is not set ++ ++# ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++# CONFIG_EXT3_FS_SECURITY is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++CONFIG_AUTOFS4_FS=y ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++# CONFIG_MSDOS_FS is not set ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++CONFIG_NLS_CODEPAGE_850=y ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# ++# Profiling support ++# ++# CONFIG_PROFILING is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_MUST_CHECK=y ++# CONFIG_MAGIC_SYSRQ is not set ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_RWSEMS is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++CONFIG_FRAME_POINTER=y ++CONFIG_FORCED_INLINING=y ++# CONFIG_RCU_TORTURE_TEST is not set ++CONFIG_DEBUG_USER=y ++# CONFIG_DEBUG_ERRORS is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++ ++# ++# Cryptographic options ++# ++# CONFIG_CRYPTO is not set ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++CONFIG_CRC32=y ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_IOMAP_COPY=y +diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.new/arch/arm/configs/kb9202_defconfig +--- linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/configs/kb9202_defconfig 2007-07-29 05:23:04.000000000 +0200 +@@ -1,19 +1,31 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.13-rc2 +-# Sun Aug 14 19:26:59 2005 ++# Linux kernel version: 2.6.21 ++# Mon May 7 11:43:14 2007 + # + CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set + CONFIG_MMU=y +-CONFIG_UID16=y ++# CONFIG_NO_IOPORT is not set ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + + # + # Code maturity level options + # +-# CONFIG_EXPERIMENTAL is not set +-CONFIG_CLEAN_COMPILE=y ++CONFIG_EXPERIMENTAL=y + CONFIG_BROKEN_ON_SMP=y + CONFIG_INIT_ENV_ARG_LIMIT=32 + +@@ -21,54 +33,103 @@ + # General setup + # + CONFIG_LOCALVERSION="" +-# CONFIG_SWAP is not set +-# CONFIG_SYSVIPC is not set +-# CONFIG_BSD_PROCESS_ACCT is not set ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++CONFIG_SYSVIPC_SYSCTL=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++CONFIG_AUDIT=y ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_SYSFS_DEPRECATED=y ++# CONFIG_RELAY is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set + CONFIG_SYSCTL=y +-# CONFIG_AUDIT is not set +-CONFIG_HOTPLUG=y +-# CONFIG_KOBJECT_UEVENT is not set +-# CONFIG_IKCONFIG is not set + # CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y + CONFIG_KALLSYMS=y + # CONFIG_KALLSYMS_ALL is not set +-# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_HOTPLUG=y + CONFIG_PRINTK=y + CONFIG_BUG=y ++CONFIG_ELF_CORE=y + CONFIG_BASE_FULL=y + CONFIG_FUTEX=y + CONFIG_EPOLL=y +-CONFIG_CC_OPTIMIZE_FOR_SIZE=y + CONFIG_SHMEM=y +-CONFIG_CC_ALIGN_FUNCTIONS=0 +-CONFIG_CC_ALIGN_LABELS=0 +-CONFIG_CC_ALIGN_LOOPS=0 +-CONFIG_CC_ALIGN_JUMPS=0 ++CONFIG_SLAB=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_RT_MUTEXES=y + # CONFIG_TINY_SHMEM is not set + CONFIG_BASE_SMALL=0 ++# CONFIG_SLOB is not set + + # + # Loadable module support + # + CONFIG_MODULES=y + CONFIG_MODULE_UNLOAD=y +-CONFIG_OBSOLETE_MODPARM=y +-# CONFIG_MODULE_SRCVERSION_ALL is not set ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y + CONFIG_KMOD=y + + # ++# Block layer ++# ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++ ++# + # System Type + # ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++CONFIG_ARCH_AT91=y + # CONFIG_ARCH_CLPS7500 is not set + # CONFIG_ARCH_CLPS711X is not set + # CONFIG_ARCH_CO285 is not set + # CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set + # CONFIG_ARCH_FOOTBRIDGE is not set +-# CONFIG_ARCH_INTEGRATOR is not set +-# CONFIG_ARCH_IOP3XX is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IOP13XX is not set + # CONFIG_ARCH_IXP4XX is not set + # CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP23XX is not set + # CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_PNX4008 is not set + # CONFIG_ARCH_PXA is not set + # CONFIG_ARCH_RPC is not set + # CONFIG_ARCH_SA1100 is not set +@@ -76,34 +137,52 @@ + # CONFIG_ARCH_SHARK is not set + # CONFIG_ARCH_LH7A40X is not set + # CONFIG_ARCH_OMAP is not set +-# CONFIG_ARCH_VERSATILE is not set +-# CONFIG_ARCH_IMX is not set +-# CONFIG_ARCH_H720X is not set +-# CONFIG_ARCH_AAEC2000 is not set +-CONFIG_ARCH_AT91=y ++ ++# ++# Atmel AT91 System-on-Chip ++# + CONFIG_ARCH_AT91RM9200=y ++# CONFIG_ARCH_AT91SAM9260 is not set ++# CONFIG_ARCH_AT91SAM9261 is not set ++# CONFIG_ARCH_AT91SAM9263 is not set + + # +-# AT91RM9200 Implementations ++# AT91RM9200 Board Type + # ++# CONFIG_MACH_ONEARM is not set + # CONFIG_ARCH_AT91RM9200DK is not set + # CONFIG_MACH_AT91RM9200EK is not set + # CONFIG_MACH_CSB337 is not set + # CONFIG_MACH_CSB637 is not set + # CONFIG_MACH_CARMEVA is not set ++# CONFIG_MACH_ATEB9200 is not set + CONFIG_MACH_KB9200=y ++# CONFIG_MACH_KAFA is not set ++# CONFIG_MACH_CHUB is not set ++ ++# ++# AT91 Board Options ++# ++ ++# ++# AT91 Feature Selections ++# ++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set ++# CONFIG_ATMEL_TCLIB is not set + + # + # Processor Type + # + CONFIG_CPU_32=y + CONFIG_CPU_ARM920T=y +-CONFIG_CPU_32v4=y ++CONFIG_CPU_32v4T=y + CONFIG_CPU_ABRT_EV4T=y + CONFIG_CPU_CACHE_V4WT=y + CONFIG_CPU_CACHE_VIVT=y + CONFIG_CPU_COPY_V4WB=y + CONFIG_CPU_TLB_V4WBI=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y + + # + # Processor Features +@@ -112,24 +191,44 @@ + # CONFIG_CPU_ICACHE_DISABLE is not set + # CONFIG_CPU_DCACHE_DISABLE is not set + # CONFIG_CPU_DCACHE_WRITETHROUGH is not set ++# CONFIG_OUTER_CACHE is not set + + # + # Bus support + # +-CONFIG_ISA_DMA_API=y + + # + # PCCARD (PCMCIA/CardBus) support + # +-# CONFIG_PCCARD is not set ++CONFIG_PCCARD=m ++# CONFIG_PCMCIA_DEBUG is not set ++CONFIG_PCMCIA=m ++CONFIG_PCMCIA_LOAD_CIS=y ++CONFIG_PCMCIA_IOCTL=y ++ ++# ++# PC-card bridges ++# ++# CONFIG_AT91_CF is not set + + # + # Kernel Features + # ++# CONFIG_PREEMPT is not set + # CONFIG_NO_IDLE_HZ is not set ++CONFIG_HZ=100 ++# CONFIG_AEABI is not set + # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set + CONFIG_FLATMEM=y + CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4096 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 + # CONFIG_LEDS is not set + CONFIG_ALIGNMENT_TRAP=y + +@@ -138,8 +237,10 @@ + # + CONFIG_ZBOOT_ROM_TEXT=0x10000000 + CONFIG_ZBOOT_ROM_BSS=0x20040000 +-CONFIG_ZBOOT_ROM=y +-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" ++# CONFIG_ZBOOT_ROM is not set ++CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set + + # + # Floating point emulation +@@ -150,6 +251,7 @@ + # + CONFIG_FPE_NWFPE=y + # CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set + + # + # Userspace binary formats +@@ -165,6 +267,96 @@ + # CONFIG_PM is not set + + # ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_NETDEBUG is not set ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_IP_MROUTE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_DIAG is not set ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++ ++# ++# DCCP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_DCCP is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++CONFIG_IP_SCTP=m ++# CONFIG_SCTP_DBG_MSG is not set ++# CONFIG_SCTP_DBG_OBJCNT is not set ++# CONFIG_SCTP_HMAC_NONE is not set ++# CONFIG_SCTP_HMAC_SHA1 is not set ++CONFIG_SCTP_HMAC_MD5=y ++ ++# ++# TIPC Configuration (EXPERIMENTAL) ++# ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_IEEE80211 is not set ++ ++# + # Device Drivers + # + +@@ -173,13 +365,95 @@ + # + CONFIG_STANDALONE=y + CONFIG_PREVENT_FIRMWARE_BUILD=y +-# CONFIG_FW_LOADER is not set +-CONFIG_DEBUG_DRIVER=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set + + # + # Memory Technology Devices (MTD) + # +-# CONFIG_MTD is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_OBSOLETE_CHIPS is not set ++ ++# ++# Mapping drivers for chip access ++# ++CONFIG_MTD_COMPLEX_MAPPINGS=y ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++CONFIG_MTD_NAND_AT91=y ++# CONFIG_MTD_NAND_NANDSIM is not set ++ ++# ++# OneNAND Flash Device Drivers ++# ++# CONFIG_MTD_ONENAND is not set + + # + # Parallel port support +@@ -189,6 +463,7 @@ + # + # Plug and Play support + # ++# CONFIG_PNPACPI is not set + + # + # Block devices +@@ -196,28 +471,27 @@ + # CONFIG_BLK_DEV_COW_COMMON is not set + CONFIG_BLK_DEV_LOOP=y + # CONFIG_BLK_DEV_CRYPTOLOOP is not set +-CONFIG_BLK_DEV_NBD=y ++# CONFIG_BLK_DEV_NBD is not set + # CONFIG_BLK_DEV_UB is not set + CONFIG_BLK_DEV_RAM=y + CONFIG_BLK_DEV_RAM_COUNT=16 +-CONFIG_BLK_DEV_RAM_SIZE=4096 +-CONFIG_BLK_DEV_INITRD=y +-CONFIG_INITRAMFS_SOURCE="" ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 + # CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set + + # +-# IO Schedulers ++# ATA/ATAPI/MFM/RLL support + # +-CONFIG_IOSCHED_NOOP=y +-CONFIG_IOSCHED_AS=y +-CONFIG_IOSCHED_DEADLINE=y +-CONFIG_IOSCHED_CFQ=y +-# CONFIG_ATA_OVER_ETH is not set ++# CONFIG_IDE is not set + + # + # SCSI device support + # ++# CONFIG_RAID_ATTRS is not set + CONFIG_SCSI=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set + CONFIG_SCSI_PROC_FS=y + + # +@@ -233,97 +507,61 @@ + # + # Some SCSI devices (e.g. CD jukebox) support multiple LUNs + # +-# CONFIG_SCSI_MULTI_LUN is not set +-# CONFIG_SCSI_CONSTANTS is not set +-# CONFIG_SCSI_LOGGING is not set ++CONFIG_SCSI_MULTI_LUN=y ++CONFIG_SCSI_CONSTANTS=y ++CONFIG_SCSI_LOGGING=y ++# CONFIG_SCSI_SCAN_ASYNC is not set + + # +-# SCSI Transport Attributes ++# SCSI Transports + # +-# CONFIG_SCSI_SPI_ATTRS is not set ++CONFIG_SCSI_SPI_ATTRS=m + # CONFIG_SCSI_FC_ATTRS is not set + # CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set + + # + # SCSI low-level drivers + # +-# CONFIG_SCSI_SATA is not set ++# CONFIG_ISCSI_TCP is not set + # CONFIG_SCSI_DEBUG is not set + + # +-# Multi-device support (RAID and LVM) +-# +-# CONFIG_MD is not set +- +-# +-# Fusion MPT device support ++# PCMCIA SCSI adapter support + # +-# CONFIG_FUSION is not set ++# CONFIG_PCMCIA_AHA152X is not set ++# CONFIG_PCMCIA_FDOMAIN is not set ++# CONFIG_PCMCIA_NINJA_SCSI is not set ++# CONFIG_PCMCIA_QLOGIC is not set ++# CONFIG_PCMCIA_SYM53C500 is not set + + # +-# IEEE 1394 (FireWire) support ++# Serial ATA (prod) and Parallel ATA (experimental) drivers + # ++# CONFIG_ATA is not set + + # +-# I2O device support ++# Multi-device support (RAID and LVM) + # ++# CONFIG_MD is not set + + # +-# Networking support ++# Fusion MPT device support + # +-CONFIG_NET=y ++# CONFIG_FUSION is not set + + # +-# Networking options ++# IEEE 1394 (FireWire) support + # +-CONFIG_PACKET=y +-# CONFIG_PACKET_MMAP is not set +-CONFIG_UNIX=y +-# CONFIG_NET_KEY is not set +-CONFIG_INET=y +-CONFIG_IP_MULTICAST=y +-# CONFIG_IP_ADVANCED_ROUTER is not set +-CONFIG_IP_FIB_HASH=y +-CONFIG_IP_PNP=y +-CONFIG_IP_PNP_DHCP=y +-# CONFIG_IP_PNP_BOOTP is not set +-# CONFIG_IP_PNP_RARP is not set +-# CONFIG_NET_IPIP is not set +-# CONFIG_NET_IPGRE is not set +-# CONFIG_IP_MROUTE is not set +-# CONFIG_SYN_COOKIES is not set +-# CONFIG_INET_AH is not set +-# CONFIG_INET_ESP is not set +-# CONFIG_INET_IPCOMP is not set +-# CONFIG_INET_TUNNEL is not set +-# CONFIG_IP_TCPDIAG is not set +-# CONFIG_IP_TCPDIAG_IPV6 is not set +-# CONFIG_TCP_CONG_ADVANCED is not set +-CONFIG_TCP_CONG_BIC=y +-# CONFIG_IPV6 is not set +-# CONFIG_NETFILTER is not set +-# CONFIG_BRIDGE is not set +-# CONFIG_VLAN_8021Q is not set +-# CONFIG_DECNET is not set +-# CONFIG_LLC2 is not set +-# CONFIG_IPX is not set +-# CONFIG_ATALK is not set + + # +-# QoS and/or fair queueing ++# I2O device support + # +-# CONFIG_NET_SCHED is not set +-# CONFIG_NET_CLS_ROUTE is not set + + # +-# Network testing ++# Network device support + # +-# CONFIG_NET_PKTGEN is not set +-# CONFIG_NETPOLL is not set +-# CONFIG_NET_POLL_CONTROLLER is not set +-# CONFIG_HAMRADIO is not set +-# CONFIG_IRDA is not set +-# CONFIG_BT is not set + CONFIG_NETDEVICES=y + # CONFIG_DUMMY is not set + # CONFIG_BONDING is not set +@@ -331,6 +569,11 @@ + # CONFIG_TUN is not set + + # ++# PHY device support ++# ++# CONFIG_PHYLIB is not set ++ ++# + # Ethernet (10 or 100Mbit) + # + CONFIG_NET_ETHERNET=y +@@ -357,11 +600,20 @@ + # CONFIG_NET_RADIO is not set + + # ++# PCMCIA network device support ++# ++# CONFIG_NET_PCMCIA is not set ++ ++# + # Wan interfaces + # + # CONFIG_WAN is not set + # CONFIG_PPP is not set + # CONFIG_SLIP is not set ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set + + # + # ISDN subsystem +@@ -372,6 +624,7 @@ + # Input device support + # + CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set + + # + # Userland interfaces +@@ -397,9 +650,7 @@ + # + # Hardware I/O ports + # +-CONFIG_SERIO=y +-# CONFIG_SERIO_SERPORT is not set +-# CONFIG_SERIO_RAW is not set ++# CONFIG_SERIO is not set + # CONFIG_GAMEPORT is not set + + # +@@ -408,6 +659,7 @@ + CONFIG_VT=y + CONFIG_VT_CONSOLE=y + CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set + # CONFIG_SERIAL_NONSTANDARD is not set + + # +@@ -420,11 +672,11 @@ + # + CONFIG_SERIAL_ATMEL=y + CONFIG_SERIAL_ATMEL_CONSOLE=y ++# CONFIG_SERIAL_ATMEL_TTYAT is not set + CONFIG_SERIAL_CORE=y + CONFIG_SERIAL_CORE_CONSOLE=y + CONFIG_UNIX98_PTYS=y +-CONFIG_LEGACY_PTYS=y +-CONFIG_LEGACY_PTY_COUNT=256 ++# CONFIG_LEGACY_PTYS is not set + + # + # IPMI +@@ -435,21 +687,23 @@ + # Watchdog Cards + # + # CONFIG_WATCHDOG is not set ++# CONFIG_HW_RANDOM is not set + # CONFIG_NVRAM is not set +-# CONFIG_RTC is not set +-# CONFIG_AT91RM9200_RTC is not set + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set + + # +-# Ftape, the floppy tape device driver ++# PCMCIA character devices + # ++# CONFIG_SYNCLINK_CS is not set ++# CONFIG_CARDMAN_4000 is not set ++# CONFIG_CARDMAN_4040 is not set + # CONFIG_RAW_DRIVER is not set + + # + # TPM devices + # +-# CONFIG_AT91_SPI is not set ++# CONFIG_TCG_TPM is not set + + # + # I2C support +@@ -457,10 +711,50 @@ + # CONFIG_I2C is not set + + # ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_SPI_MASTER is not set ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++ ++# ++# Hardware Monitoring support ++# ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_ABITUGURU is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_VT1211 is not set ++CONFIG_HWMON_DEBUG_CHIP=y ++ ++# + # Misc devices + # + + # ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# LED devices ++# ++# CONFIG_NEW_LEDS is not set ++ ++# ++# LED drivers ++# ++ ++# ++# LED Triggers ++# ++ ++# + # Multimedia devices + # + # CONFIG_VIDEO_DEV is not set +@@ -469,17 +763,57 @@ + # Digital Video Broadcasting Devices + # + # CONFIG_DVB is not set ++# CONFIG_USB_DABUSB is not set + + # + # Graphics support + # +-# CONFIG_FB is not set ++CONFIG_BACKLIGHT_LCD_SUPPORT=y ++CONFIG_BACKLIGHT_CLASS_DEVICE=y ++# CONFIG_LCD_CLASS_DEVICE is not set ++CONFIG_BACKLIGHT_KB920x=y ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++CONFIG_FB_MODE_HELPERS=y ++CONFIG_FB_TILEBLITTING=y ++ ++# ++# Frame buffer hardware drivers ++# ++CONFIG_FB_S1D15605=y ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set + + # + # Console display driver support + # + # CONFIG_VGA_CONSOLE is not set + CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++CONFIG_FONTS=y ++# CONFIG_FONT_8x8 is not set ++# CONFIG_FONT_8x16 is not set ++# CONFIG_FONT_6x11 is not set ++# CONFIG_FONT_7x14 is not set ++# CONFIG_FONT_PEARL_8x8 is not set ++# CONFIG_FONT_ACORN_8x8 is not set ++CONFIG_FONT_MINI_4x6=y ++# CONFIG_FONT_SUN8x16 is not set ++# CONFIG_FONT_SUN12x22 is not set ++# CONFIG_FONT_10x18 is not set ++ ++# ++# Logo configuration ++# ++# CONFIG_LOGO is not set + + # + # Sound +@@ -487,82 +821,98 @@ + # CONFIG_SOUND is not set + + # ++# HID Devices ++# ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++ ++# + # USB support + # + CONFIG_USB_ARCH_HAS_HCD=y + CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set + CONFIG_USB=y +-CONFIG_USB_DEBUG=y ++# CONFIG_USB_DEBUG is not set + + # + # Miscellaneous USB options + # + CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set + + # + # USB Host Controller Drivers + # + # CONFIG_USB_ISP116X_HCD is not set + CONFIG_USB_OHCI_HCD=y +-# CONFIG_USB_OHCI_BIG_ENDIAN is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set + CONFIG_USB_OHCI_LITTLE_ENDIAN=y + # CONFIG_USB_SL811_HCD is not set + + # + # USB Device Class drivers + # +-# CONFIG_USB_BLUETOOTH_TTY is not set + # CONFIG_USB_ACM is not set + # CONFIG_USB_PRINTER is not set + + # +-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information + # + CONFIG_USB_STORAGE=y +-CONFIG_USB_STORAGE_DEBUG=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set + # CONFIG_USB_STORAGE_FREECOM is not set + # CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++CONFIG_USB_LIBUSUAL=y + + # + # USB Input Devices + # +-# CONFIG_USB_HID is not set +- +-# +-# USB HID Boot Protocol drivers +-# +-# CONFIG_USB_KBD is not set +-# CONFIG_USB_MOUSE is not set ++CONFIG_USB_HID=y ++# CONFIG_USB_HIDINPUT_POWERBOOK is not set ++# CONFIG_HID_FF is not set ++# CONFIG_USB_HIDDEV is not set + # CONFIG_USB_AIPTEK is not set + # CONFIG_USB_WACOM is not set + # CONFIG_USB_ACECAD is not set + # CONFIG_USB_KBTAB is not set + # CONFIG_USB_POWERMATE is not set +-# CONFIG_USB_MTOUCH is not set +-# CONFIG_USB_ITMTOUCH is not set +-# CONFIG_USB_EGALAX is not set ++# CONFIG_USB_TOUCHSCREEN is not set ++# CONFIG_USB_YEALINK is not set + # CONFIG_USB_XPAD is not set + # CONFIG_USB_ATI_REMOTE is not set ++# CONFIG_USB_ATI_REMOTE2 is not set ++# CONFIG_USB_KEYSPAN_REMOTE is not set ++# CONFIG_USB_APPLETOUCH is not set ++# CONFIG_USB_GTCO is not set + + # + # USB Imaging devices + # ++# CONFIG_USB_MDC800 is not set + # CONFIG_USB_MICROTEK is not set + + # +-# USB Multimedia devices +-# +-# CONFIG_USB_DABUSB is not set +- +-# +-# Video4Linux support is needed for USB Multimedia device support +-# +- +-# + # USB Network Adapters + # ++# CONFIG_USB_CATC is not set + # CONFIG_USB_KAWETH is not set + # CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET_MII is not set + # CONFIG_USB_USBNET is not set + # CONFIG_USB_MON is not set + +@@ -580,12 +930,23 @@ + # + # CONFIG_USB_EMI62 is not set + # CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set + # CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set + # CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set + # CONFIG_USB_CYTHERM is not set +-# CONFIG_USB_PHIDGETKIT is not set +-# CONFIG_USB_PHIDGETSERVO is not set ++# CONFIG_USB_PHIDGET is not set + # CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set + + # + # USB DSL modem support +@@ -599,36 +960,51 @@ + # + # MMC/SD Card support + # +-# CONFIG_MMC is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_AT91=y ++ ++# ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set + + # + # File systems + # + CONFIG_EXT2_FS=y + CONFIG_EXT2_FS_XATTR=y +-# CONFIG_EXT2_FS_POSIX_ACL is not set +-# CONFIG_EXT2_FS_SECURITY is not set ++CONFIG_EXT2_FS_POSIX_ACL=y ++CONFIG_EXT2_FS_SECURITY=y + # CONFIG_EXT2_FS_XIP is not set + CONFIG_EXT3_FS=y + CONFIG_EXT3_FS_XATTR=y +-# CONFIG_EXT3_FS_POSIX_ACL is not set +-# CONFIG_EXT3_FS_SECURITY is not set ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4DEV_FS is not set + CONFIG_JBD=y + # CONFIG_JBD_DEBUG is not set + CONFIG_FS_MBCACHE=y + # CONFIG_REISERFS_FS is not set + # CONFIG_JFS_FS is not set +- +-# +-# XFS support +-# ++CONFIG_FS_POSIX_ACL=y + # CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set + # CONFIG_MINIX_FS is not set + # CONFIG_ROMFS_FS is not set +-# CONFIG_QUOTA is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++CONFIG_QUOTA=y ++# CONFIG_QFMT_V1 is not set ++CONFIG_QFMT_V2=y ++CONFIG_QUOTACTL=y + CONFIG_DNOTIFY=y +-CONFIG_AUTOFS_FS=y ++# CONFIG_AUTOFS_FS is not set + CONFIG_AUTOFS4_FS=y ++# CONFIG_FUSE_FS is not set + + # + # CD-ROM/DVD Filesystems +@@ -643,25 +1019,40 @@ + CONFIG_MSDOS_FS=y + CONFIG_VFAT_FS=y + CONFIG_FAT_DEFAULT_CODEPAGE=437 +-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" + # CONFIG_NTFS_FS is not set + + # + # Pseudo filesystems + # + CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y + CONFIG_SYSFS=y +-CONFIG_DEVPTS_FS_XATTR=y +-# CONFIG_DEVPTS_FS_SECURITY is not set + CONFIG_TMPFS=y +-# CONFIG_TMPFS_XATTR is not set ++# CONFIG_TMPFS_POSIX_ACL is not set + # CONFIG_HUGETLB_PAGE is not set + CONFIG_RAMFS=y ++CONFIG_CONFIGFS_FS=y + + # + # Miscellaneous filesystems + # ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set + # CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set + # CONFIG_CRAMFS is not set + # CONFIG_VXFS_FS is not set + # CONFIG_HPFS_FS is not set +@@ -675,16 +1066,23 @@ + CONFIG_NFS_FS=y + CONFIG_NFS_V3=y + # CONFIG_NFS_V3_ACL is not set ++CONFIG_NFS_V4=y ++# CONFIG_NFS_DIRECTIO is not set + # CONFIG_NFSD is not set + CONFIG_ROOT_NFS=y + CONFIG_LOCKD=y + CONFIG_LOCKD_V4=y + CONFIG_NFS_COMMON=y + CONFIG_SUNRPC=y ++CONFIG_SUNRPC_GSS=y ++CONFIG_RPCSEC_GSS_KRB5=y ++# CONFIG_RPCSEC_GSS_SPKM3 is not set + # CONFIG_SMB_FS is not set + # CONFIG_CIFS is not set + # CONFIG_NCP_FS is not set + # CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set + + # + # Partition Types +@@ -734,26 +1132,51 @@ + # CONFIG_NLS_ISO8859_15 is not set + # CONFIG_NLS_KOI8_R is not set + # CONFIG_NLS_KOI8_U is not set +-# CONFIG_NLS_UTF8 is not set ++CONFIG_NLS_UTF8=y ++ ++# ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# ++# Profiling support ++# ++# CONFIG_PROFILING is not set + + # + # Kernel hacking + # + # CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set + CONFIG_DEBUG_KERNEL=y +-# CONFIG_MAGIC_SYSRQ is not set +-CONFIG_LOG_BUF_SHIFT=14 ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_LOG_BUF_SHIFT=17 ++CONFIG_DETECT_SOFTLOCKUP=y + # CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set + # CONFIG_DEBUG_SLAB is not set +-# CONFIG_DEBUG_SPINLOCK is not set +-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++# CONFIG_DEBUG_MUTEXES is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set + # CONFIG_DEBUG_KOBJECT is not set + CONFIG_DEBUG_BUGVERBOSE=y + # CONFIG_DEBUG_INFO is not set +-# CONFIG_DEBUG_FS is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set + CONFIG_FRAME_POINTER=y +-CONFIG_DEBUG_USER=y +-CONFIG_DEBUG_ERRORS=y ++CONFIG_FORCED_INLINING=y ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_DEBUG_USER is not set ++# CONFIG_DEBUG_ERRORS is not set + CONFIG_DEBUG_LL=y + # CONFIG_DEBUG_ICEDCC is not set + +@@ -766,7 +1189,43 @@ + # + # Cryptographic options + # +-# CONFIG_CRYPTO is not set ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_HASH=m ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=m ++# CONFIG_CRYPTO_XCBC is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_ECB is not set ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_LRW is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_TEST is not set + + # + # Hardware crypto devices +@@ -775,6 +1234,14 @@ + # + # Library routines + # ++CONFIG_BITREVERSE=y + # CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set + CONFIG_CRC32=y + # CONFIG_LIBCRC32C is not set ++CONFIG_AUDIT_GENERIC=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200.c 2007-07-29 05:23:04.000000000 +0200 +@@ -267,6 +267,33 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91rm9200_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91RM9200_BASE_TCB0, ++ .irq = { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ }, ++ [1] = { ++ .physaddr = AT91RM9200_BASE_TCB1, ++ .irq = { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 }, ++ .clk = { &tc3_clk, &tc4_clk, &tc5_clk }, ++ }, ++}; ++ ++#define at91rm9200_tc_init() atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks)) ++ ++#else ++#define at91rm9200_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91RM9200 processor initialization + * -------------------------------------------------------------------- */ + void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +@@ -288,6 +315,9 @@ + + /* Initialize GPIO subsystem */ + at91_gpio_init(at91rm9200_gpio, banks); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91rm9200_tc_init(); + } + + +@@ -301,28 +331,28 @@ + static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ +- 0, /* Parallel IO Controller D */ +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ +- 6, /* USART 3 */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller D */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ ++ 5, /* USART 3 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface */ +- 5, /* Serial Synchronous Controller 0 */ +- 5, /* Serial Synchronous Controller 1 */ +- 5, /* Serial Synchronous Controller 2 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 4, /* Serial Synchronous Controller 2 */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* Ethernet MAC */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200_devices.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-29 05:23:04.000000000 +0200 +@@ -477,7 +477,18 @@ + * SPI + * -------------------------------------------------------------------- */ + +-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) ++#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */ ++#define SPI_DEVNAME "at91_spi" ++ ++#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */ ++#define SPI_DEVNAME "at91_spi" ++ ++#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */ ++#define SPI_DEVNAME "atmel_spi" ++ ++#endif ++ ++#ifdef SPI_DEVNAME + static u64 spi_dmamask = 0xffffffffUL; + + static struct resource spi_resources[] = { +@@ -494,7 +505,7 @@ + }; + + static struct platform_device at91rm9200_spi_device = { +- .name = "at91_spi", ++ .name = SPI_DEVNAME, + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, +@@ -603,6 +614,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260.c 2007-07-29 05:23:04.000000000 +0200 +@@ -269,6 +269,33 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91sam9260_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91SAM9260_BASE_TCB0, ++ .irq = { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ }, ++ [1] = { ++ .physaddr = AT91SAM9260_BASE_TCB1, ++ .irq = { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 }, ++ .clk = { &tc3_clk, &tc4_clk, &tc5_clk }, ++ }, ++}; ++ ++#define at91sam9260_tc_init() atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks)) ++ ++#else ++#define at91sam9260_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91SAM9260 processor initialization + * -------------------------------------------------------------------- */ + +@@ -315,6 +342,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9260_gpio, 3); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9260_tc_init(); + } + + /* -------------------------------------------------------------------- +@@ -327,30 +357,30 @@ + static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ + 0, /* Analog-to-Digital Converter */ +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface 0 */ +- 6, /* Serial Peripheral Interface 1 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface 0 */ ++ 5, /* Serial Peripheral Interface 1 */ + 5, /* Serial Synchronous Controller */ + 0, + 0, + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* Ethernet */ + 0, /* Image Sensor Interface */ +- 6, /* USART 3 */ +- 6, /* USART 4 */ +- 6, /* USART 5 */ ++ 5, /* USART 3 */ ++ 5, /* USART 4 */ ++ 5, /* USART 5 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260_devices.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260_devices.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260_devices.c 2007-07-29 05:23:04.000000000 +0200 +@@ -524,6 +524,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261.c 2007-07-29 05:23:04.000000000 +0200 +@@ -247,6 +247,28 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91sam9261_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91SAM9261_BASE_TCB0, ++ .irq = { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ } ++}; ++ ++#define at91sam9261_tc_init() atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks)) ++ ++#else ++#define at91sam9261_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91SAM9261 processor initialization + * -------------------------------------------------------------------- */ + +@@ -267,6 +289,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9261_gpio, 3); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9261_tc_init(); + } + + /* -------------------------------------------------------------------- +@@ -279,25 +304,25 @@ + static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C */ +- 0, +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C */ ++ 0, ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ + 0, /* Multimedia Card Interface */ +- 4, /* USB Device Port */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface 0 */ +- 6, /* Serial Peripheral Interface 1 */ +- 5, /* Serial Synchronous Controller 0 */ +- 5, /* Serial Synchronous Controller 1 */ +- 5, /* Serial Synchronous Controller 2 */ ++ 2, /* USB Device Port */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface 0 */ ++ 5, /* Serial Peripheral Interface 1 */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 4, /* Serial Synchronous Controller 2 */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 3, /* LCD Controller */ + 0, + 0, +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261_devices.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261_devices.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261_devices.c 2007-07-29 05:23:04.000000000 +0200 +@@ -14,6 +14,9 @@ + #include <asm/mach/map.h> + + #include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/arch/board.h> + #include <asm/arch/gpio.h> +@@ -522,6 +525,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263.c 2007-07-29 05:23:04.000000000 +0200 +@@ -273,6 +273,28 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91sam9263_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91SAM9263_BASE_TCB0, ++ .irq = { AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB }, ++ .clk = { &tcb_clk, &tcb_clk, &tcb_clk }, ++ } ++}; ++ ++#define at91sam9263_tc_init() atmel_tc_init(at91sam9263_tcblocks, ARRAY_SIZE(at91sam9263_tcblocks)) ++ ++#else ++#define at91sam9263_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91SAM9263 processor initialization + * -------------------------------------------------------------------- */ + +@@ -292,6 +314,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9263_gpio, 5); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9263_tc_init(); + } + + /* -------------------------------------------------------------------- +@@ -304,34 +329,34 @@ + static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ +- 0, /* Parallel IO Controller A */ +- 0, /* Parallel IO Controller B */ +- 0, /* Parallel IO Controller C, D and E */ ++ 1, /* Parallel IO Controller A */ ++ 1, /* Parallel IO Controller B */ ++ 1, /* Parallel IO Controller C, D and E */ + 0, + 0, +- 6, /* USART 0 */ +- 6, /* USART 1 */ +- 6, /* USART 2 */ ++ 5, /* USART 0 */ ++ 5, /* USART 1 */ ++ 5, /* USART 2 */ + 0, /* Multimedia Card Interface 0 */ + 0, /* Multimedia Card Interface 1 */ +- 4, /* CAN */ +- 0, /* Two-Wire Interface */ +- 6, /* Serial Peripheral Interface 0 */ +- 6, /* Serial Peripheral Interface 1 */ +- 5, /* Serial Synchronous Controller 0 */ +- 5, /* Serial Synchronous Controller 1 */ +- 6, /* AC97 Controller */ ++ 3, /* CAN */ ++ 6, /* Two-Wire Interface */ ++ 5, /* Serial Peripheral Interface 0 */ ++ 5, /* Serial Peripheral Interface 1 */ ++ 4, /* Serial Synchronous Controller 0 */ ++ 4, /* Serial Synchronous Controller 1 */ ++ 5, /* AC97 Controller */ + 0, /* Timer Counter 0, 1 and 2 */ + 0, /* Pulse Width Modulation Controller */ + 3, /* Ethernet */ + 0, + 0, /* 2D Graphic Engine */ +- 3, /* USB Device Port */ ++ 2, /* USB Device Port */ + 0, /* Image Sensor Interface */ + 3, /* LDC Controller */ + 0, /* DMA Controller */ + 0, +- 3, /* USB Host port */ ++ 2, /* USB Host port */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ + }; +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263_devices.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263_devices.c 2007-07-29 05:23:04.000000000 +0200 +@@ -13,6 +13,9 @@ + #include <asm/mach/map.h> + + #include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/arch/board.h> + #include <asm/arch/gpio.h> +@@ -625,6 +628,56 @@ + + + /* -------------------------------------------------------------------- ++ * Image Sensor Interface ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE) ++ ++struct resource isi_resources[] = { ++ [0] = { ++ .start = AT91SAM9263_BASE_ISI, ++ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9263_ID_ISI, ++ .end = AT91SAM9263_ID_ISI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9263_isi_device = { ++ .name = "at91_isi", ++ .id = -1, ++ .resource = isi_resources, ++ .num_resources = ARRAY_SIZE(isi_resources), ++}; ++ ++void __init at91_add_device_isi(void) ++{ ++ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ ++ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ ++ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */ ++ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */ ++ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */ ++ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */ ++ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */ ++ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */ ++ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ ++ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ ++ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ ++ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ ++ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ ++ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ ++ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ ++ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ ++} ++#else ++void __init at91_add_device_isi(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * LCD Controller + * -------------------------------------------------------------------- */ + +@@ -715,6 +768,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl.c 2007-07-29 05:23:04.000000000 +0200 +@@ -246,6 +246,28 @@ + + + /* -------------------------------------------------------------------- ++ * Timer/Counter library initialization ++ * -------------------------------------------------------------------- */ ++#ifdef CONFIG_ATMEL_TCLIB ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock at91sam9rl_tcblocks[] = { ++ [0] = { ++ .physaddr = AT91SAM9RL_BASE_TCB0, ++ .irq = { AT91SAM9RL_ID_TC0, AT91SAM9RL_ID_TC1, AT91SAM9RL_ID_TC2 }, ++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, ++ } ++}; ++ ++#define at91sam9rl_tc_init() atmel_tc_init(at91sam9rl_tcblocks, ARRAY_SIZE(at91sam9rl_tcblocks)) ++ ++#else ++#define at91sam9rl_tc_init() do {} while(0) ++#endif ++ ++ ++/* -------------------------------------------------------------------- + * AT91SAM9RL processor initialization + * -------------------------------------------------------------------- */ + +@@ -284,6 +306,9 @@ + + /* Register GPIO subsystem */ + at91_gpio_init(at91sam9rl_gpio, 4); ++ ++ /* Initialize the Timer/Counter blocks */ ++ at91sam9rl_tc_init(); + } + + /* -------------------------------------------------------------------- +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl_devices.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl_devices.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl_devices.c 2007-07-29 05:23:04.000000000 +0200 +@@ -370,6 +370,32 @@ + #endif + + ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ + /* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-cam60.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-cam60.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/board-cam60.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-cam60.c 2007-07-29 05:23:04.000000000 +0200 +@@ -0,0 +1,148 @@ ++/* ++ * KwikByte CAM60 ++ * ++ * based on board-sam9260ek.c ++ * Copyright (C) 2005 SAN People ++ * Copyright (C) 2006 Atmel ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/spi/flash.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91sam926x_mc.h> ++ ++#include "generic.h" ++ ++ ++/* ++ * Serial port configuration. ++ * 0 .. 5 = USART0 .. USART5 ++ * 6 = DBGU ++ */ ++static struct at91_uart_config __initdata cam60_uart_config = { ++ .console_tty = 0, /* ttyS0 */ ++ .nr_tty = 1, ++ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */ ++}; ++ ++static void __init cam60_map_io(void) ++{ ++ /* Initialize processor: 10 MHz crystal */ ++ at91sam9260_initialize(10000000); ++ ++ /* Setup the serial ports and console */ ++ at91_init_serial(&cam60_uart_config); ++} ++ ++static void __init cam60_init_irq(void) ++{ ++ at91sam9260_init_interrupts(NULL); ++} ++ ++ ++/* ++ * SPI devices. ++ */ ++#if defined(CONFIG_MTD_DATAFLASH) ++static struct mtd_partition __initdata cam60_spi_partitions[] = { ++ { ++ .name = "BOOT1", ++ .offset = 0, ++ .size = 4 * 1056, ++ }, ++ { ++ .name = "BOOT2", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 256 * 1056, ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 2222 * 1056, ++ }, ++ { ++ .name = "file system", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct flash_platform_data __initdata cam60_spi_flash_platform_data = { ++ .name = "spi_flash", ++ .parts = cam60_spi_partitions, ++ .nr_parts = ARRAY_SIZE(cam60_spi_partitions) ++}; ++#endif ++ ++static struct spi_board_info cam60_spi_devices[] = { ++#if defined(CONFIG_MTD_DATAFLASH) ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ .bus_num = 0, ++ .platform_data = &cam60_spi_flash_platform_data ++ }, ++#endif ++}; ++ ++ ++/* ++ * MACB Ethernet device ++ */ ++static struct __initdata at91_eth_data cam60_macb_data = { ++ .phy_irq_pin = AT91_PIN_PB5, ++ .is_rmii = 0, ++}; ++ ++ ++static void __init cam60_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* SPI */ ++ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); ++ /* Ethernet */ ++ at91_add_device_eth(&cam60_macb_data); ++} ++ ++MACHINE_START(CAM60, "KwikByte CAM60") ++ /* Maintainer: KwikByte */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91sam926x_timer, ++ .map_io = cam60_map_io, ++ .init_irq = cam60_init_irq, ++ .init_machine = cam60_board_init, ++MACHINE_END +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-chub.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-chub.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/board-chub.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-chub.c 2007-07-29 05:23:04.000000000 +0200 +@@ -0,0 +1,132 @@ ++/* ++ * linux/arch/arm/mach-at91/board-chub.c ++ * ++ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board ++ * by Kuten Ivan ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++#include "generic.h" ++ ++/* ++ * Serial port configuration. ++ * 0 .. 3 = USART0 .. USART3 ++ * 4 = DBGU ++ */ ++static struct at91_uart_config __initdata chub_uart_config = { ++ .console_tty = 0, /* ttyS0 */ ++ .nr_tty = 5, ++ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */ ++}; ++ ++static void __init chub_init_irq(void) ++{ ++ at91rm9200_init_interrupts(NULL); ++} ++ ++static void __init chub_map_io(void) ++{ ++ /* Initialize clocks: 18.432 MHz crystal */ ++ at91rm9200_initialize(18432000, AT91RM9200_PQFP); ++ ++ /* Setup the serial ports and console */ ++ at91_init_serial(&chub_uart_config); ++} ++ ++static struct at91_eth_data __initdata chub_eth_data = { ++ .phy_irq_pin = AT91_PIN_PB29, ++ .is_rmii = 0, ++}; ++ ++static struct mtd_partition __initdata chub_nand_partition[] = { ++ { ++ .name = "NAND Partition 1", ++ .offset = 0, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) ++{ ++ *num_partitions = ARRAY_SIZE(chub_nand_partition); ++ return chub_nand_partition; ++} ++ ++static struct at91_nand_data __initdata chub_nand_data = { ++ .ale = 22, ++ .cle = 21, ++ .enable_pin = AT91_PIN_PA27, ++ .partition_info = nand_partitions, ++}; ++ ++static struct spi_board_info chub_spi_devices[] = { ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ }, ++}; ++ ++static void __init chub_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* I2C */ ++ at91_add_device_i2c(); ++ /* Ethernet */ ++ at91_add_device_eth(&chub_eth_data); ++ /* SPI */ ++ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices)); ++ /* NAND Flash */ ++ at91_add_device_nand(&chub_nand_data); ++ /* Disable write protect for NAND */ ++ at91_set_gpio_output(AT91_PIN_PB7, 1); ++ /* Power enable for 3x RS-232 and 1x RS-485 */ ++ at91_set_gpio_output(AT91_PIN_PB9, 1); ++ /* Disable write protect for FRAM */ ++ at91_set_gpio_output(AT91_PIN_PA21, 1); ++ /* Disable write protect for Dataflash */ ++ at91_set_gpio_output(AT91_PIN_PA19, 1); ++} ++ ++MACHINE_START(CHUB, "Promwad Chub") ++ /* Maintainer: Ivan Kuten AT Promwad DOT com */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91rm9200_timer, ++ .map_io = chub_map_io, ++ .init_irq = chub_init_irq, ++ .init_machine = chub_board_init, ++MACHINE_END +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-csb337.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-csb337.c 2007-07-29 05:23:04.000000000 +0200 +@@ -24,6 +24,7 @@ + #include <linux/module.h> + #include <linux/platform_device.h> + #include <linux/spi/spi.h> ++#include <linux/interrupt.h> + #include <linux/mtd/physmap.h> + + #include <asm/hardware.h> +@@ -59,6 +60,7 @@ + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); ++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */ + + /* Setup the serial ports and console */ + at91_init_serial(&csb337_uart_config); +@@ -149,6 +151,55 @@ + .num_resources = ARRAY_SIZE(csb_flash_resources), + }; + ++static struct at91_gpio_led csb337_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PB0, ++ .trigger = "heartbeat", ++ }, ++ { ++ .name = "led1", ++ .gpio = AT91_PIN_PB1, ++ .trigger = "timer", ++ }, ++ { ++ .name = "led2", ++ .gpio = AT91_PIN_PB2, ++ } ++}; ++ ++#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1) ++static irqreturn_t switch_irq_handler(int irq, void *context) ++{ ++ return IRQ_HANDLED; ++} ++ ++static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode) ++{ ++ int res; ++ ++ res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL); ++ if (res == 0) ++ enable_irq_wake(irq); ++} ++ ++static void __init csb300_switches(void) ++{ ++#ifdef CONFIG_CSB300_WAKE_SW0 ++ at91_set_A_periph(AT91_PIN_PB29, 1); /* IRQ0 */ ++ switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING); ++#endif ++#ifdef CONFIG_CSB300_WAKE_SW1 ++ at91_set_gpio_input(AT91_PIN_PB28, 1); ++ at91_set_deglitch(AT91_PIN_PB28, 1); ++ switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING); ++#endif ++ /* there's also SW2 at PA21, GPIO or TIOA2 */ ++} ++#else ++static void __init csb300_switches(void) {} ++#endif ++ + static void __init csb337_board_init(void) + { + /* Serial */ +@@ -168,8 +219,12 @@ + at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &csb337_mmc_data); ++ /* LEDS */ ++ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds)); + /* NOR flash */ + platform_device_register(&csb_flash); ++ /* Switches on CSB300 */ ++ csb300_switches(); + } + + MACHINE_START(CSB337, "Cogent CSB337") +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-dk.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-dk.c 2007-07-29 05:23:04.000000000 +0200 +@@ -73,6 +73,185 @@ + at91rm9200_init_interrupts(NULL); + } + ++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) ++#include <video/s1d13xxxfb.h> ++#include <asm/arch/ics1523.h> ++ ++/* EPSON S1D13806 FB */ ++#define AT91_FB_REG_BASE 0x30000000L ++#define AT91_FB_REG_SIZE 0x200 ++#define AT91_FB_VMEM_BASE 0x30200000L ++#define AT91_FB_VMEM_SIZE 0x140000L ++ ++static void __init dk_init_video(void) ++{ ++ /* NWAIT Signal */ ++ at91_set_A_periph(AT91_PIN_PC6, 0); ++ ++ /* Initialization of the Static Memory Controller for Chip Select 2 */ ++ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */ ++ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */ ++ | AT91_SMC_TDF_(1) /* float time */ ++ ); ++ ++ at91_ics1523_init(); ++} ++ ++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz) ++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */ ++static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = { ++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */ ++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */ ++ {S1DREG_GPIO_CNF0, 0x00}, ++ {S1DREG_GPIO_CNF1, 0x00}, ++ {S1DREG_GPIO_CTL0, 0x08}, ++ {S1DREG_GPIO_CTL1, 0x00}, ++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/ ++ {S1DREG_LCD_CLK_CNF, 0x00}, ++ {S1DREG_CRT_CLK_CNF, 0x00}, ++ {S1DREG_MPLUG_CLK_CNF, 0x00}, ++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */ ++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */ ++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */ ++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */ ++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */ ++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */ ++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */ ++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */ ++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */ ++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */ ++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */ ++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, ++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */ ++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */ ++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */ ++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */ ++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */ ++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */ ++ {S1DREG_LCD_DISP_START0, 0x00}, ++ {S1DREG_LCD_DISP_START1, 0xC8}, ++ {S1DREG_LCD_DISP_START2, 0x00}, ++ {S1DREG_LCD_MEM_OFF0, 0x80}, ++ {S1DREG_LCD_MEM_OFF1, 0x02}, ++ {S1DREG_LCD_PIX_PAN, 0x00}, ++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B}, ++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C}, ++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */ ++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */ ++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */ ++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */ ++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, ++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */ ++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */ ++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */ ++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */ ++ {S1DREG_TV_OUT_CTL, 0x10}, ++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */ ++ {S1DREG_CRT_DISP_START0, 0x00}, ++ {S1DREG_CRT_DISP_START1, 0x00}, ++ {S1DREG_CRT_DISP_START2, 0x00}, ++ {S1DREG_CRT_MEM_OFF0, 0x80}, ++ {S1DREG_CRT_MEM_OFF1, 0x02}, ++ {S1DREG_CRT_PIX_PAN, 0x00}, ++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B}, ++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C}, ++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */ ++ {S1DREG_LCD_CUR_START, 0x01}, ++ {S1DREG_LCD_CUR_XPOS0, 0x00}, ++ {S1DREG_LCD_CUR_XPOS1, 0x00}, ++ {S1DREG_LCD_CUR_YPOS0, 0x00}, ++ {S1DREG_LCD_CUR_YPOS1, 0x00}, ++ {S1DREG_LCD_CUR_BCTL0, 0x00}, ++ {S1DREG_LCD_CUR_GCTL0, 0x00}, ++ {S1DREG_LCD_CUR_RCTL0, 0x00}, ++ {S1DREG_LCD_CUR_BCTL1, 0x1F}, ++ {S1DREG_LCD_CUR_GCTL1, 0x3F}, ++ {S1DREG_LCD_CUR_RCTL1, 0x1F}, ++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, ++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */ ++ {S1DREG_CRT_CUR_START, 0x01}, ++ {S1DREG_CRT_CUR_XPOS0, 0x00}, ++ {S1DREG_CRT_CUR_XPOS1, 0x00}, ++ {S1DREG_CRT_CUR_YPOS0, 0x00}, ++ {S1DREG_CRT_CUR_YPOS1, 0x00}, ++ {S1DREG_CRT_CUR_BCTL0, 0x00}, ++ {S1DREG_CRT_CUR_GCTL0, 0x00}, ++ {S1DREG_CRT_CUR_RCTL0, 0x00}, ++ {S1DREG_CRT_CUR_BCTL1, 0x1F}, ++ {S1DREG_CRT_CUR_GCTL1, 0x3F}, ++ {S1DREG_CRT_CUR_RCTL1, 0x1F}, ++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, ++ {S1DREG_BBLT_CTL0, 0x00}, ++ {S1DREG_BBLT_CTL0, 0x00}, ++ {S1DREG_BBLT_CC_EXP, 0x00}, ++ {S1DREG_BBLT_OP, 0x00}, ++ {S1DREG_BBLT_SRC_START0, 0x00}, ++ {S1DREG_BBLT_SRC_START1, 0x00}, ++ {S1DREG_BBLT_SRC_START2, 0x00}, ++ {S1DREG_BBLT_DST_START0, 0x00}, ++ {S1DREG_BBLT_DST_START1, 0x00}, ++ {S1DREG_BBLT_DST_START2, 0x00}, ++ {S1DREG_BBLT_MEM_OFF0, 0x00}, ++ {S1DREG_BBLT_MEM_OFF1, 0x00}, ++ {S1DREG_BBLT_WIDTH0, 0x00}, ++ {S1DREG_BBLT_WIDTH1, 0x00}, ++ {S1DREG_BBLT_HEIGHT0, 0x00}, ++ {S1DREG_BBLT_HEIGHT1, 0x00}, ++ {S1DREG_BBLT_BGC0, 0x00}, ++ {S1DREG_BBLT_BGC1, 0x00}, ++ {S1DREG_BBLT_FGC0, 0x00}, ++ {S1DREG_BBLT_FGC1, 0x00}, ++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */ ++ {S1DREG_LKUP_ADDR, 0x00}, ++ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */ ++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */ ++ {S1DREG_CPU2MEM_WDOGT, 0x00}, ++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */ ++}; ++ ++static struct s1d13xxxfb_pdata dk_s1dfb_pdata = { ++ .initregs = dk_s1dfb_initregs, ++ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs), ++ .platform_init_video = dk_init_video, ++}; ++ ++static u64 s1dfb_dmamask = 0xffffffffUL; ++ ++static struct resource dk_s1dfb_resource[] = { ++ [0] = { /* video mem */ ++ .name = "s1d13806 memory", ++ .start = AT91_FB_VMEM_BASE, ++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { /* video registers */ ++ .name = "s1d13806 registers", ++ .start = AT91_FB_REG_BASE, ++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static struct platform_device dk_s1dfb_device = { ++ .name = "s1d13806fb", ++ .id = -1, ++ .dev = { ++ .dma_mask = &s1dfb_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &dk_s1dfb_pdata, ++ }, ++ .resource = dk_s1dfb_resource, ++ .num_resources = ARRAY_SIZE(dk_s1dfb_resource), ++}; ++ ++static void __init dk_add_device_video(void) ++{ ++ platform_device_register(&dk_s1dfb_device); ++} ++#else ++static void __init dk_add_device_video(void) {} ++#endif ++ + static struct at91_eth_data __initdata dk_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +@@ -151,7 +330,7 @@ + #define DK_FLASH_SIZE 0x200000 + + static struct physmap_flash_data dk_flash_data = { +- .width = 2, ++ .width = 2, + }; + + static struct resource dk_flash_resource = { +@@ -170,6 +349,13 @@ + .num_resources = 1, + }; + ++static struct at91_gpio_led dk_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PB2, ++ .trigger = "timer", ++ } ++}; + + static void __init dk_board_init(void) + { +@@ -200,8 +386,10 @@ + at91_add_device_nand(&dk_nand_data); + /* NOR Flash */ + platform_device_register(&dk_flash); ++ /* LEDs */ ++ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); + /* VGA */ +-// dk_add_device_video(); ++ dk_add_device_video(); + } + + MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-ek.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-ek.c 2007-07-29 05:23:04.000000000 +0200 +@@ -73,6 +73,187 @@ + at91rm9200_init_interrupts(NULL); + } + ++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) ++#include <video/s1d13xxxfb.h> ++#include <asm/arch/ics1523.h> ++ ++/* EPSON S1D13806 FB */ ++#define AT91_FB_REG_BASE 0x40000000L ++#define AT91_FB_REG_SIZE 0x200 ++#define AT91_FB_VMEM_BASE 0x40200000L ++#define AT91_FB_VMEM_SIZE 0x140000L ++ ++static void __init ek_init_video(void) ++{ ++ /* NWAIT Signal */ ++ at91_set_A_periph(AT91_PIN_PC6, 0); ++ ++ /* Initialization of the Static Memory Controller for Chip Select 3 */ ++ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */ ++ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */ ++ | AT91_SMC_TDF_(1) /* float time */ ++ ); ++ ++ at91_ics1523_init(); ++} ++ ++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz) ++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */ ++static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = { ++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */ ++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */ ++ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00 ++ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08 ++ {S1DREG_GPIO_CTL0, 0x00}, ++ {S1DREG_GPIO_CTL1, 0x00}, ++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/ ++ {S1DREG_LCD_CLK_CNF, 0x00}, ++ {S1DREG_CRT_CLK_CNF, 0x00}, ++ {S1DREG_MPLUG_CLK_CNF, 0x00}, ++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */ ++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */ ++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */ ++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */ ++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */ ++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */ ++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */ ++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */ ++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */ ++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */ ++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */ ++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, ++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */ ++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */ ++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */ ++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */ ++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */ ++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */ ++ {S1DREG_LCD_DISP_START0, 0x00}, ++ {S1DREG_LCD_DISP_START1, 0xC8}, ++ {S1DREG_LCD_DISP_START2, 0x00}, ++ {S1DREG_LCD_MEM_OFF0, 0x80}, ++ {S1DREG_LCD_MEM_OFF1, 0x02}, ++ {S1DREG_LCD_PIX_PAN, 0x00}, ++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B}, ++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C}, ++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */ ++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */ ++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */ ++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */ ++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, ++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */ ++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */ ++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */ ++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */ ++ {S1DREG_TV_OUT_CTL, 0x10}, ++ {0x005E, 0x9F}, ++ {0x005F, 0x00}, ++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */ ++ {S1DREG_CRT_DISP_START0, 0x00}, ++ {S1DREG_CRT_DISP_START1, 0x00}, ++ {S1DREG_CRT_DISP_START2, 0x00}, ++ {S1DREG_CRT_MEM_OFF0, 0x80}, ++ {S1DREG_CRT_MEM_OFF1, 0x02}, ++ {S1DREG_CRT_PIX_PAN, 0x00}, ++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B}, ++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C}, ++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */ ++ {S1DREG_LCD_CUR_START, 0x01}, ++ {S1DREG_LCD_CUR_XPOS0, 0x00}, ++ {S1DREG_LCD_CUR_XPOS1, 0x00}, ++ {S1DREG_LCD_CUR_YPOS0, 0x00}, ++ {S1DREG_LCD_CUR_YPOS1, 0x00}, ++ {S1DREG_LCD_CUR_BCTL0, 0x00}, ++ {S1DREG_LCD_CUR_GCTL0, 0x00}, ++ {S1DREG_LCD_CUR_RCTL0, 0x00}, ++ {S1DREG_LCD_CUR_BCTL1, 0x1F}, ++ {S1DREG_LCD_CUR_GCTL1, 0x3F}, ++ {S1DREG_LCD_CUR_RCTL1, 0x1F}, ++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, ++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */ ++ {S1DREG_CRT_CUR_START, 0x01}, ++ {S1DREG_CRT_CUR_XPOS0, 0x00}, ++ {S1DREG_CRT_CUR_XPOS1, 0x00}, ++ {S1DREG_CRT_CUR_YPOS0, 0x00}, ++ {S1DREG_CRT_CUR_YPOS1, 0x00}, ++ {S1DREG_CRT_CUR_BCTL0, 0x00}, ++ {S1DREG_CRT_CUR_GCTL0, 0x00}, ++ {S1DREG_CRT_CUR_RCTL0, 0x00}, ++ {S1DREG_CRT_CUR_BCTL1, 0x1F}, ++ {S1DREG_CRT_CUR_GCTL1, 0x3F}, ++ {S1DREG_CRT_CUR_RCTL1, 0x1F}, ++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, ++ {S1DREG_BBLT_CTL0, 0x00}, ++ {S1DREG_BBLT_CTL0, 0x00}, ++ {S1DREG_BBLT_CC_EXP, 0x00}, ++ {S1DREG_BBLT_OP, 0x00}, ++ {S1DREG_BBLT_SRC_START0, 0x00}, ++ {S1DREG_BBLT_SRC_START1, 0x00}, ++ {S1DREG_BBLT_SRC_START2, 0x00}, ++ {S1DREG_BBLT_DST_START0, 0x00}, ++ {S1DREG_BBLT_DST_START1, 0x00}, ++ {S1DREG_BBLT_DST_START2, 0x00}, ++ {S1DREG_BBLT_MEM_OFF0, 0x00}, ++ {S1DREG_BBLT_MEM_OFF1, 0x00}, ++ {S1DREG_BBLT_WIDTH0, 0x00}, ++ {S1DREG_BBLT_WIDTH1, 0x00}, ++ {S1DREG_BBLT_HEIGHT0, 0x00}, ++ {S1DREG_BBLT_HEIGHT1, 0x00}, ++ {S1DREG_BBLT_BGC0, 0x00}, ++ {S1DREG_BBLT_BGC1, 0x00}, ++ {S1DREG_BBLT_FGC0, 0x00}, ++ {S1DREG_BBLT_FGC1, 0x00}, ++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */ ++ {S1DREG_LKUP_ADDR, 0x00}, ++ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */ ++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */ ++ {S1DREG_CPU2MEM_WDOGT, 0x00}, ++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */ ++}; ++ ++static struct s1d13xxxfb_pdata ek_s1dfb_pdata = { ++ .initregs = ek_s1dfb_initregs, ++ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs), ++ .platform_init_video = ek_init_video, ++}; ++ ++static u64 s1dfb_dmamask = 0xffffffffUL; ++ ++static struct resource ek_s1dfb_resource[] = { ++ [0] = { /* video mem */ ++ .name = "s1d13806 memory", ++ .start = AT91_FB_VMEM_BASE, ++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { /* video registers */ ++ .name = "s1d13806 registers", ++ .start = AT91_FB_REG_BASE, ++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static struct platform_device ek_s1dfb_device = { ++ .name = "s1d13806fb", ++ .id = -1, ++ .dev = { ++ .dma_mask = &s1dfb_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &ek_s1dfb_pdata, ++ }, ++ .resource = ek_s1dfb_resource, ++ .num_resources = ARRAY_SIZE(ek_s1dfb_resource), ++}; ++ ++static void __init ek_add_device_video(void) ++{ ++ platform_device_register(&ek_s1dfb_device); ++} ++#else ++static void __init ek_add_device_video(void) {} ++#endif ++ + static struct at91_eth_data __initdata ek_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +@@ -113,7 +294,7 @@ + #define EK_FLASH_SIZE 0x200000 + + static struct physmap_flash_data ek_flash_data = { +- .width = 2, ++ .width = 2, + }; + + static struct resource ek_flash_resource = { +@@ -132,6 +313,18 @@ + .num_resources = 1, + }; + ++static struct at91_gpio_led ek_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PB1, ++ .trigger = "heartbeat", ++ }, ++ { ++ .name = "led1", ++ .gpio = AT91_PIN_PB2, ++ .trigger = "timer", ++ } ++}; + + static void __init ek_board_init(void) + { +@@ -158,8 +351,10 @@ + #endif + /* NOR Flash */ + platform_device_register(&ek_flash); ++ /* LEDs */ ++ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* VGA */ +-// ek_add_device_video(); ++ ek_add_device_video(); + } + + MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-kb9202.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-kb9202.c 2007-07-29 05:23:04.000000000 +0200 +@@ -37,6 +37,8 @@ + #include <asm/arch/board.h> + #include <asm/arch/gpio.h> + ++#include <asm/arch/at91rm9200_mc.h> ++ + #include "generic.h" + + +@@ -111,6 +113,48 @@ + .partition_info = nand_partitions, + }; + ++ ++#if defined(CONFIG_FB_S1D15605) ++#warning "Rather pass reset pin via platform_data" ++static struct resource kb9202_lcd_resources[] = { ++ [0] = { ++ .start = AT91_CHIPSELECT_2, ++ .end = AT91_CHIPSELECT_2 + 0x200FF, ++ .flags = IORESOURCE_MEM ++ }, ++ [1] = { /* reset pin */ ++ .start = AT91_PIN_PC22, ++ .end = AT91_PIN_PC22, ++ .flags = IORESOURCE_MEM ++ }, ++}; ++ ++static struct platform_device kb9202_lcd_device = { ++ .name = "s1d15605fb", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(kb9202_lcd_resources), ++ .resource = kb9202_lcd_resources, ++}; ++ ++static void __init kb9202_add_device_lcd(void) ++{ ++ /* In case the boot loader did not set the chip select mode and timing */ ++ at91_sys_write(AT91_SMC_CSR(2), ++ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 | ++ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1)); ++ ++ /* Backlight pin = output, off */ ++ at91_set_gpio_output(AT91_PIN_PC23, 0); ++ ++ /* Reset pin = output, in reset */ ++ at91_set_gpio_output(AT91_PIN_PC22, 0); ++ ++ platform_device_register(&kb9202_lcd_device); ++} ++#else ++static void __init kb9202_add_device_lcd(void) {} ++#endif ++ + static void __init kb9202_board_init(void) + { + /* Serial */ +@@ -129,6 +173,8 @@ + at91_add_device_spi(NULL, 0); + /* NAND */ + at91_add_device_nand(&kb9202_nand_data); ++ /* LCD */ ++ kb9202_add_device_lcd(); + } + + MACHINE_START(KB9200, "KB920x") +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9261ek.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9261ek.c 2007-07-29 05:23:04.000000000 +0200 +@@ -27,6 +27,9 @@ + #include <linux/spi/spi.h> + #include <linux/spi/ads7846.h> + #include <linux/dm9000.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/hardware.h> + #include <asm/setup.h> +@@ -251,6 +254,7 @@ + .bus_num = 0, + .platform_data = &ads_info, + .irq = AT91SAM9261_ID_IRQ0, ++ .controller_data = AT91_PIN_PA28, /* CS pin */ + }, + #endif + #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) +@@ -271,6 +275,65 @@ + }; + + ++/* ++ * LCD Controller ++ */ ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) ++static struct fb_videomode at91_tft_vga_modes[] = { ++ { ++ .name = "TX09D50VM1CCA @ 60", ++ .refresh = 60, ++ .xres = 240, .yres = 320, ++ .pixclock = KHZ2PICOS(4965), ++ ++ .left_margin = 1, .right_margin = 33, ++ .upper_margin = 1, .lower_margin = 0, ++ .hsync_len = 5, .vsync_len = 1, ++ ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ }, ++}; ++ ++static struct fb_monspecs at91fb_default_monspecs = { ++ .manufacturer = "HIT", ++ .monitor = "TX09D50VM1CCA", ++ ++ .modedb = at91_tft_vga_modes, ++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), ++ .hfmin = 15000, ++ .hfmax = 64000, ++ .vfmin = 50, ++ .vfmax = 150, ++}; ++ ++#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ ++ | ATMEL_LCDC_DISTYPE_TFT \ ++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) ++ ++static void at91_lcdc_power_control(int on) ++{ ++ if (on) ++ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ ++ else ++ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ ++} ++ ++/* Driver datas */ ++static struct atmel_lcdfb_info __initdata ek_lcdc_data = { ++ .default_bpp = 16, ++ .default_dmacon = ATMEL_LCDC_DMAEN, ++ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2, ++ .default_monspecs = &at91fb_default_monspecs, ++ .atmel_lcdfb_power_control = at91_lcdc_power_control, ++ .guard_time = 1, ++}; ++ ++#else ++static struct atmel_lcdfb_info __initdata ek_lcdc_data; ++#endif ++ ++ + static void __init ek_board_init(void) + { + /* Serial */ +@@ -296,6 +359,8 @@ + /* MMC */ + at91_add_device_mmc(0, &ek_mmc_data); + #endif ++ /* LCD Controller */ ++ at91_add_device_lcdc(&ek_lcdc_data); + } + + MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9263ek.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9263ek.c 2007-07-29 05:23:04.000000000 +0200 +@@ -26,6 +26,9 @@ + #include <linux/platform_device.h> + #include <linux/spi/spi.h> + #include <linux/spi/ads7846.h> ++#include <linux/fb.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/hardware.h> + #include <asm/setup.h> +@@ -202,6 +205,65 @@ + + + /* ++ * LCD Controller ++ */ ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) ++static struct fb_videomode at91_tft_vga_modes[] = { ++ { ++ .name = "TX09D50VM1CCA @ 60", ++ .refresh = 60, ++ .xres = 240, .yres = 320, ++ .pixclock = KHZ2PICOS(4965), ++ ++ .left_margin = 1, .right_margin = 33, ++ .upper_margin = 1, .lower_margin = 0, ++ .hsync_len = 5, .vsync_len = 1, ++ ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ }, ++}; ++ ++static struct fb_monspecs at91fb_default_monspecs = { ++ .manufacturer = "HIT", ++ .monitor = "TX09D70VM1CCA", ++ ++ .modedb = at91_tft_vga_modes, ++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), ++ .hfmin = 15000, ++ .hfmax = 64000, ++ .vfmin = 50, ++ .vfmax = 150, ++}; ++ ++#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ ++ | ATMEL_LCDC_DISTYPE_TFT \ ++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) ++ ++static void at91_lcdc_power_control(int on) ++{ ++ if (on) ++ at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */ ++ else ++ at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */ ++} ++ ++/* Driver datas */ ++static struct atmel_lcdfb_info __initdata ek_lcdc_data = { ++ .default_bpp = 16, ++ .default_dmacon = ATMEL_LCDC_DMAEN, ++ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, ++ .default_monspecs = &at91fb_default_monspecs, ++ .atmel_lcdfb_power_control = at91_lcdc_power_control, ++ .guard_time = 1, ++}; ++ ++#else ++static struct atmel_lcdfb_info __initdata ek_lcdc_data; ++#endif ++ ++ ++/* + * AC97 + */ + static struct atmel_ac97_data ek_ac97_data = { +@@ -230,6 +292,8 @@ + at91_add_device_nand(&ek_nand_data); + /* I2C */ + at91_add_device_i2c(); ++ /* LCD Controller */ ++ at91_add_device_lcdc(&ek_lcdc_data); + /* AC97 */ + at91_add_device_ac97(&ek_ac97_data); + } +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/clock.c linux-2.6.22-rc5.new/arch/arm/mach-at91/clock.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/clock.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/clock.c 2007-07-29 05:23:04.000000000 +0200 +@@ -32,6 +32,7 @@ + #include <asm/arch/cpu.h> + + #include "clock.h" ++#include "generic.h" + + + /* +@@ -254,6 +255,23 @@ + + /*------------------------------------------------------------------------*/ + ++#ifdef CONFIG_PM ++ ++int clk_must_disable(struct clk *clk) ++{ ++ if (!at91_suspend_entering_slow_clock()) ++ return 0; ++ ++ while (clk->parent) ++ clk = clk->parent; ++ return clk != &clk32k; ++} ++EXPORT_SYMBOL(clk_must_disable); ++ ++#endif ++ ++/*------------------------------------------------------------------------*/ ++ + #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + + /* +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/generic.h linux-2.6.22-rc5.new/arch/arm/mach-at91/generic.h +--- linux-2.6.22-rc5/arch/arm/mach-at91/generic.h 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/generic.h 2007-07-29 05:23:04.000000000 +0200 +@@ -36,6 +36,7 @@ + /* Power Management */ + extern void at91_irq_suspend(void); + extern void at91_irq_resume(void); ++extern int at91_suspend_entering_slow_clock(void); + + /* GPIO */ + #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/ics1523.c linux-2.6.22-rc5.new/arch/arm/mach-at91/ics1523.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/ics1523.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/ics1523.c 2007-07-29 05:23:04.000000000 +0200 +@@ -0,0 +1,207 @@ ++/* ++ * arch/arm/mach-at91rm9200/ics1523.c ++ * ++ * Copyright (C) 2003 ATMEL Rousset ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <asm/hardware.h> ++#include <asm/io.h> ++ ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/init.h> ++ ++#include <asm/arch/ics1523.h> ++#include <asm/arch/at91_twi.h> ++#include <asm/arch/gpio.h> ++ ++/* TWI Errors */ ++#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE) ++ ++ ++static void __iomem *twi_base; ++ ++#define at91_twi_read(reg) __raw_readl(twi_base + (reg)) ++#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg)) ++ ++ ++/* ----------------------------------------------------------------------------- ++ * Initialization of TWI CLOCK ++ * ----------------------------------------------------------------------------- */ ++ ++static void at91_ics1523_SetTwiClock(unsigned int mck_khz) ++{ ++ int sclock; ++ ++ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */ ++ sclock = (10*mck_khz / ICS_TRANSFER_RATE); ++ if (sclock % 10 >= 5) ++ sclock = (sclock /10) - 5; ++ else ++ sclock = (sclock /10)- 6; ++ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */ ++ ++ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8)); ++} ++ ++/* ----------------------------------------------------------------------------- ++ * Read a byte with TWI Interface from the Clock Generator ICS1523 ++ * ----------------------------------------------------------------------------- */ ++ ++static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in) ++{ ++ int Status, nb_trial; ++ ++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR)); ++ at91_twi_write(AT91_TWI_IADR, reg_address); ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); ++ ++ /* Program temporizing period (300us) */ ++ udelay(300); ++ ++ /* Wait TXcomplete ... */ ++ nb_trial = 0; ++ Status = at91_twi_read(AT91_TWI_SR); ++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) { ++ nb_trial++; ++ Status = at91_twi_read(AT91_TWI_SR); ++ } ++ ++ if (Status & AT91_TWI_TXCOMP) { ++ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR); ++ return ICS1523_ACCESS_OK; ++ } ++ else ++ return ICS1523_ACCESS_ERROR; ++} ++ ++/* ----------------------------------------------------------------------------- ++ * Write a byte with TWI Interface to the Clock Generator ICS1523 ++ * ----------------------------------------------------------------------------- */ ++ ++static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out) ++{ ++ int Status, nb_trial; ++ ++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR)); ++ at91_twi_write(AT91_TWI_IADR, reg_address); ++ at91_twi_write(AT91_TWI_THR, data_out); ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); ++ ++ /* Program temporizing period (300us) */ ++ udelay(300); ++ ++ nb_trial = 0; ++ Status = at91_twi_read(AT91_TWI_SR); ++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) { ++ nb_trial++; ++ if (Status & AT91_TWI_ERROR) { ++ /* If Underrun OR NACK - Start again */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); ++ ++ /* Program temporizing period (300us) */ ++ udelay(300); ++ } ++ Status = at91_twi_read(AT91_TWI_SR); ++ }; ++ ++ if (Status & AT91_TWI_TXCOMP) ++ return ICS1523_ACCESS_OK; ++ else ++ return ICS1523_ACCESS_ERROR; ++} ++ ++/* ----------------------------------------------------------------------------- ++ * Initialization of the Clock Generator ICS1523 ++ * ----------------------------------------------------------------------------- */ ++ ++int at91_ics1523_init(void) ++{ ++ int nb_trial; ++ int ack = ICS1523_ACCESS_OK; ++ unsigned int status = 0xffffffff; ++ struct clk *twi_clk; ++ ++ /* Map in TWI peripheral */ ++ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K); ++ if (!twi_base) ++ return -ENOMEM; ++ ++ /* pins used for TWI interface */ ++ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */ ++ at91_set_multi_drive(AT91_PIN_PA25, 1); ++ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */ ++ at91_set_multi_drive(AT91_PIN_PA26, 1); ++ ++ /* Enable the TWI clock */ ++ twi_clk = clk_get(NULL, "twi_clk"); ++ if (IS_ERR(twi_clk)) ++ return ICS1523_ACCESS_ERROR; ++ clk_enable(twi_clk); ++ ++ /* Disable interrupts */ ++ at91_twi_write(AT91_TWI_IDR, -1); ++ ++ /* Reset peripheral */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); ++ ++ /* Set Master mode */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); ++ ++ /* Set TWI Clock Waveform Generator Register */ ++ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */ ++ ++ /* ICS1523 Initialisation */ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK)); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F)); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0); ++ ++ nb_trial = 0; ++ do { ++ nb_trial++; ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/)); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD)); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00); ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR)); ++ ++ /* Program 1ms temporizing period */ ++ mdelay(1); ++ ++ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status); ++ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10)); ++ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR)); ++ ++ /* Program 1ms temporizing period */ ++ mdelay(1); ++ ++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00); ++ ++ /* Program 1ms temporizing period */ ++ mdelay(1); ++ ++ /* All done - cleanup */ ++ iounmap(twi_base); ++ clk_disable(twi_clk); ++ clk_put(twi_clk); ++ ++ return ack; ++} +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig linux-2.6.22-rc5.new/arch/arm/mach-at91/Kconfig +--- linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/Kconfig 2007-07-29 05:23:04.000000000 +0200 +@@ -97,6 +97,12 @@ + help + Select this if you are using Sperry-Sun's KAFA board. + ++config MACH_CHUB ++ bool "Promwad Chub board" ++ depends on ARCH_AT91RM9200 ++ help ++ Select this if you are using Promwad's Chub board. ++ + endif + + # ---------------------------------------------------------- +@@ -121,6 +127,13 @@ + Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> + ++config MACH_CAM60 ++ bool "KwikByte CAM60 board" ++ depends on ARCH_AT91SAM9260 ++ help ++ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260. ++ <http://www.kwikbyte.com> ++ + endif + + # ---------------------------------------------------------- +@@ -184,6 +197,20 @@ + On AT91SAM926x boards both types of NAND flash can be present + (8 and 16 bit data bus width). + ++config CSB300_WAKE_SW0 ++ bool "CSB300 SW0 irq0 wakeup" ++ depends on MACH_CSB337 && PM ++ help ++ If you have a CSB300 connected to your CSB337, this lets ++ SW0 serve as a wakeup button. It uses IRQ0. ++ ++config CSB300_WAKE_SW1 ++ bool "CSB300 SW1 gpio wakeup" ++ depends on MACH_CSB337 && PM ++ help ++ If you have a CSB300 connected to your CSB337, this lets ++ SW1 serve as a wakeup button. It uses GPIO. ++ + # ---------------------------------------------------------- + + comment "AT91 Feature Selections" +@@ -194,6 +221,20 @@ + Select this if you need to program one or more of the PCK0..PCK3 + programmable clock outputs. + ++config ATMEL_TCLIB ++ bool "Timer/Counter Library" ++ help ++ Select this if you want a library to allocate the Timer/Counter ++ blocks found on many Atmel processors. This facilitates using ++ these modules despite processor differences. ++ ++config AT91_SLOW_CLOCK ++ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)" ++ depends on PM && EXPERIMENTAL ++ help ++ Select this if you wish to put the CPU into slow clock mode ++ while in the "Suspend to RAM" state, to save more power. ++ + endmenu + + endif +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Makefile linux-2.6.22-rc5.new/arch/arm/mach-at91/Makefile +--- linux-2.6.22-rc5/arch/arm/mach-at91/Makefile 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/Makefile 2007-07-29 05:23:04.000000000 +0200 +@@ -8,6 +8,8 @@ + obj- := + + obj-$(CONFIG_PM) += pm.o ++obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o ++obj-$(CONFIG_ATMEL_TCLIB) += tclib.o + + # CPU-specific support + obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o +@@ -26,10 +28,12 @@ + obj-$(CONFIG_MACH_KB9200) += board-kb9202.o + obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o + obj-$(CONFIG_MACH_KAFA) += board-kafa.o ++obj-$(CONFIG_MACH_CHUB) += board-chub.o + obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o + + # AT91SAM9260 board-specific support + obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o ++obj-$(CONFIG_MACH_CAM60) += board-cam60.o + + # AT91SAM9261 board-specific support + obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o +@@ -51,7 +55,7 @@ + obj-$(CONFIG_LEDS) += $(led-y) + + # VGA support +-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o ++obj-$(CONFIG_FB_S1D13XXX) += ics1523.o + + + ifeq ($(CONFIG_PM_DEBUG),y) +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/pm.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c 2007-07-29 05:23:04.000000000 +0200 +@@ -63,6 +63,7 @@ + * Verify that all the clocks are correct before entering + * slow-clock mode. + */ ++#warning "SAM9260 only has 3 programmable clocks." + static int at91_pm_verify_clocks(void) + { + unsigned long scsr; +@@ -103,20 +104,15 @@ + } + + /* +- * Call this from platform driver suspend() to see how deeply to suspend. ++ * This is called from clk_must_disable(), to see how deeply to suspend. + * For example, some controllers (like OHCI) need one of the PLL clocks + * in order to act as a wakeup source, and those are not available when + * going into slow clock mode. +- * +- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have +- * the very same problem (but not using at91 main_clk), and it'd be better +- * to add one generic API rather than lots of platform-specific ones. + */ + int at91_suspend_entering_slow_clock(void) + { + return (target_state == PM_SUSPEND_MEM); + } +-EXPORT_SYMBOL(at91_suspend_entering_slow_clock); + + + static void (*slow_clock)(void); +@@ -205,16 +201,23 @@ + .enter = at91_pm_enter, + }; + ++#ifdef CONFIG_AT91_SLOW_CLOCK ++extern void at91rm9200_slow_clock(void); ++extern u32 at91rm9200_slow_clock_sz; ++#endif ++ + static int __init at91_pm_init(void) + { +- printk("AT91: Power Management\n"); +- +-#ifdef CONFIG_AT91_PM_SLOW_CLOCK +- /* REVISIT allocations of SRAM should be dynamically managed. ++#ifdef CONFIG_AT91_SLOW_CLOCK ++ /* ++ * REVISIT allocations of SRAM should be dynamically managed. + * FIQ handlers and other components will want SRAM/TCM too... + */ +- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K)); ++ slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K)); + memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz); ++ printk("AT91: Power Management (with slow clock mode)\n"); ++#else ++ printk("AT91: Power Management\n"); + #endif + + /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c.orig linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c.orig +--- linux-2.6.22-rc5/arch/arm/mach-at91/pm.c.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c.orig 2007-06-17 04:09:12.000000000 +0200 +@@ -0,0 +1,227 @@ ++/* ++ * arch/arm/mach-at91/pm.c ++ * AT91 Power Management ++ * ++ * Copyright (C) 2005 David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/pm.h> ++#include <linux/sched.h> ++#include <linux/proc_fs.h> ++#include <linux/pm.h> ++#include <linux/interrupt.h> ++#include <linux/sysfs.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/atomic.h> ++#include <asm/mach/time.h> ++#include <asm/mach/irq.h> ++#include <asm/mach-types.h> ++ ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91rm9200_mc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/cpu.h> ++ ++#include "generic.h" ++ ++ ++static int at91_pm_valid_state(suspend_state_t state) ++{ ++ switch (state) { ++ case PM_SUSPEND_ON: ++ case PM_SUSPEND_STANDBY: ++ case PM_SUSPEND_MEM: ++ return 1; ++ ++ default: ++ return 0; ++ } ++} ++ ++ ++static suspend_state_t target_state; ++ ++/* ++ * Called after processes are frozen, but before we shutdown devices. ++ */ ++static int at91_pm_prepare(suspend_state_t state) ++{ ++ target_state = state; ++ return 0; ++} ++ ++/* ++ * Verify that all the clocks are correct before entering ++ * slow-clock mode. ++ */ ++static int at91_pm_verify_clocks(void) ++{ ++ unsigned long scsr; ++ int i; ++ ++ scsr = at91_sys_read(AT91_PMC_SCSR); ++ ++ /* USB must not be using PLLB */ ++ if (cpu_is_at91rm9200()) { ++ if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) { ++ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); ++ return 0; ++ } ++ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) { ++ if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) { ++ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); ++ return 0; ++ } ++ } ++ ++#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS ++ /* PCK0..PCK3 must be disabled, or configured to use clk32k */ ++ for (i = 0; i < 4; i++) { ++ u32 css; ++ ++ if ((scsr & (AT91_PMC_PCK0 << i)) == 0) ++ continue; ++ ++ css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; ++ if (css != AT91_PMC_CSS_SLOW) { ++ pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); ++ return 0; ++ } ++ } ++#endif ++ ++ return 1; ++} ++ ++/* ++ * Call this from platform driver suspend() to see how deeply to suspend. ++ * For example, some controllers (like OHCI) need one of the PLL clocks ++ * in order to act as a wakeup source, and those are not available when ++ * going into slow clock mode. ++ * ++ * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have ++ * the very same problem (but not using at91 main_clk), and it'd be better ++ * to add one generic API rather than lots of platform-specific ones. ++ */ ++int at91_suspend_entering_slow_clock(void) ++{ ++ return (target_state == PM_SUSPEND_MEM); ++} ++EXPORT_SYMBOL(at91_suspend_entering_slow_clock); ++ ++ ++static void (*slow_clock)(void); ++ ++ ++static int at91_pm_enter(suspend_state_t state) ++{ ++ at91_gpio_suspend(); ++ at91_irq_suspend(); ++ ++ pr_debug("AT91: PM - wake mask %08x, pm state %d\n", ++ /* remember all the always-wake irqs */ ++ (at91_sys_read(AT91_PMC_PCSR) ++ | (1 << AT91_ID_FIQ) ++ | (1 << AT91_ID_SYS) ++ | (at91_extern_irq)) ++ & at91_sys_read(AT91_AIC_IMR), ++ state); ++ ++ switch (state) { ++ /* ++ * Suspend-to-RAM is like STANDBY plus slow clock mode, so ++ * drivers must suspend more deeply: only the master clock ++ * controller may be using the main oscillator. ++ */ ++ case PM_SUSPEND_MEM: ++ /* ++ * Ensure that clocks are in a valid state. ++ */ ++ if (!at91_pm_verify_clocks()) ++ goto error; ++ ++ /* ++ * Enter slow clock mode by switching over to clk32k and ++ * turning off the main oscillator; reverse on wakeup. ++ */ ++ if (slow_clock) { ++ slow_clock(); ++ break; ++ } else { ++ /* DEVELOPMENT ONLY */ ++ pr_info("AT91: PM - no slow clock mode yet ...\n"); ++ /* FALLTHROUGH leaving master clock alone */ ++ } ++ ++ /* ++ * STANDBY mode has *all* drivers suspended; ignores irqs not ++ * marked as 'wakeup' event sources; and reduces DRAM power. ++ * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and ++ * nothing fancy done with main or cpu clocks. ++ */ ++ case PM_SUSPEND_STANDBY: ++ /* ++ * NOTE: the Wait-for-Interrupt instruction needs to be ++ * in icache so the SDRAM stays in self-refresh mode until ++ * the wakeup IRQ occurs. ++ */ ++ asm("b 1f; .align 5; 1:"); ++ asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ ++ at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */ ++ /* fall though to next state */ ++ ++ case PM_SUSPEND_ON: ++ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ ++ break; ++ ++ default: ++ pr_debug("AT91: PM - bogus suspend state %d\n", state); ++ goto error; ++ } ++ ++ pr_debug("AT91: PM - wakeup %08x\n", ++ at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); ++ ++error: ++ target_state = PM_SUSPEND_ON; ++ at91_irq_resume(); ++ at91_gpio_resume(); ++ return 0; ++} ++ ++ ++static struct pm_ops at91_pm_ops ={ ++ .valid = at91_pm_valid_state, ++ .prepare = at91_pm_prepare, ++ .enter = at91_pm_enter, ++}; ++ ++static int __init at91_pm_init(void) ++{ ++ printk("AT91: Power Management\n"); ++ ++#ifdef CONFIG_AT91_PM_SLOW_CLOCK ++ /* REVISIT allocations of SRAM should be dynamically managed. ++ * FIQ handlers and other components will want SRAM/TCM too... ++ */ ++ slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K)); ++ memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz); ++#endif ++ ++ /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ ++ at91_sys_write(AT91_SDRAMC_LPR, 0); ++ ++ pm_set_ops(&at91_pm_ops); ++ ++ return 0; ++} ++arch_initcall(at91_pm_init); +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm_slowclock.S linux-2.6.22-rc5.new/arch/arm/mach-at91/pm_slowclock.S +--- linux-2.6.22-rc5/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm_slowclock.S 2007-07-29 05:23:04.000000000 +0200 +@@ -0,0 +1,172 @@ ++/* ++ * arch/arm/mach-at91/pm_slow_clock.S ++ * ++ * Copyright (C) 2006 Savin Zlobec ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/linkage.h> ++#include <asm/hardware.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91rm9200_mc.h> ++ ++#define MCKRDY_TIMEOUT 1000 ++#define MOSCRDY_TIMEOUT 1000 ++#define PLLALOCK_TIMEOUT 1000 ++ ++ .macro wait_mckrdy ++ mov r2, #MCKRDY_TIMEOUT ++1: sub r2, r2, #1 ++ cmp r2, #0 ++ beq 2f ++ ldr r3, [r1, #AT91_PMC_SR] ++ tst r3, #AT91_PMC_MCKRDY ++ beq 1b ++2: ++ .endm ++ ++ .macro wait_moscrdy ++ mov r2, #MOSCRDY_TIMEOUT ++1: sub r2, r2, #1 ++ cmp r2, #0 ++ beq 2f ++ ldr r3, [r1, #AT91_PMC_SR] ++ tst r3, #AT91_PMC_MOSCS ++ beq 1b ++2: ++ .endm ++ ++ .macro wait_pllalock ++ mov r2, #PLLALOCK_TIMEOUT ++1: sub r2, r2, #1 ++ cmp r2, #0 ++ beq 2f ++ ldr r3, [r1, #AT91_PMC_SR] ++ tst r3, #AT91_PMC_LOCKA ++ beq 1b ++2: ++ .endm ++ ++ .macro wait_plladis ++ mov r2, #PLLALOCK_TIMEOUT ++1: sub r2, r2, #1 ++ cmp r2, #0 ++ beq 2f ++ ldr r3, [r1, #AT91_PMC_SR] ++ tst r3, #AT91_PMC_LOCKA ++ bne 1b ++2: ++ .endm ++ ++ .text ++ ++ENTRY(at91rm9200_slow_clock) ++ ++ ldr r1, .at91_va_base_sys ++ ++ /* Put SDRAM in self refresh mode */ ++ ++ b 1f ++ .align 5 ++1: mcr p15, 0, r0, c7, c10, 4 ++ mov r2, #1 ++ str r2, [r1, #AT91_SDRAMC_SRR] ++ ++ /* Save Master clock setting */ ++ ++ ldr r2, [r1, #AT91_PMC_MCKR] ++ str r2, .saved_mckr ++ ++ /* ++ * Set the Master clock source to slow clock ++ * ++ * First set the CSS field, wait for MCKRDY ++ * and than set the PRES and MDIV fields. ++ * ++ * See eratta #2[78] for details. ++ */ ++ ++ bic r2, r2, #3 ++ str r2, [r1, #AT91_PMC_MCKR] ++ ++ wait_mckrdy ++ ++ mov r2, #0 ++ str r2, [r1, #AT91_PMC_MCKR] ++ ++ /* Save PLLA setting and disable it */ ++ ++ ldr r2, [r1, #AT91_CKGR_PLLAR] ++ str r2, .saved_pllar ++ ++ mov r2, #0 ++ str r2, [r1, #AT91_CKGR_PLLAR] ++ ++ wait_plladis ++ ++ /* Turn off the main oscillator */ ++ ++ ldr r2, [r1, #AT91_CKGR_MOR] ++ bic r2, r2, #AT91_PMC_MOSCEN ++ str r2, [r1, #AT91_CKGR_MOR] ++ ++ /* Wait for interrupt */ ++ ++ mcr p15, 0, r0, c7, c0, 4 ++ ++ /* Turn on the main oscillator */ ++ ++ ldr r2, [r1, #AT91_CKGR_MOR] ++ orr r2, r2, #AT91_PMC_MOSCEN ++ str r2, [r1, #AT91_CKGR_MOR] ++ ++ wait_moscrdy ++ ++ /* Restore PLLA setting */ ++ ++ ldr r2, .saved_pllar ++ str r2, [r1, #AT91_CKGR_PLLAR] ++ ++ wait_pllalock ++ ++ /* ++ * Restore master clock setting ++ * ++ * First set PRES if it was not 0, ++ * than set CSS and MDIV fields. ++ * After every change wait for ++ * MCKRDY. ++ * ++ * See eratta #2[78] for details. ++ */ ++ ++ ldr r2, .saved_mckr ++ tst r2, #0x1C ++ beq 2f ++ and r2, r2, #0x1C ++ str r2, [r1, #AT91_PMC_MCKR] ++ ++ wait_mckrdy ++ ++2: ldr r2, .saved_mckr ++ str r2, [r1, #AT91_PMC_MCKR] ++ ++ wait_mckrdy ++ ++ mov pc, lr ++ ++.saved_mckr: ++ .word 0 ++ ++.saved_pllar: ++ .word 0 ++ ++.at91_va_base_sys: ++ .word AT91_VA_BASE_SYS ++ ++ENTRY(at91rm9200_slow_clock_sz) ++ .word .-at91rm9200_slow_clock +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/tclib.c linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.c +--- linux-2.6.22-rc5/arch/arm/mach-at91/tclib.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.c 2007-07-29 05:23:04.000000000 +0200 +@@ -0,0 +1,17 @@ ++#include <linux/clk.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++ ++#include "tclib.h" ++ ++static struct atmel_tcblock *blocks; ++static int nblocks; ++ ++/* ++ * Called from the processor-specific init to register the TC Blocks. ++ */ ++void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n) ++{ ++ blocks = tcblocks; ++ nblocks = n; ++} +diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/tclib.h linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.h +--- linux-2.6.22-rc5/arch/arm/mach-at91/tclib.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.h 2007-07-29 05:23:04.000000000 +0200 +@@ -0,0 +1,11 @@ ++ ++#define TC_PER_TCB 3 ++ ++struct atmel_tcblock { ++ u32 physaddr; ++ void __iomem *ioaddr; ++ struct clk *clk[TC_PER_TCB]; ++ int irq[TC_PER_TCB]; ++}; ++ ++extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n); +diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_mci.h linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h +--- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_mci.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h Tue May 8 12:13:31 2007 +@@ -26,6 +26,9 @@ + #define AT91_MCI_MR 0x04 /* Mode Register */ + #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ + #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ ++#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ ++#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ ++#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ + #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ + #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ + #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ +diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_pmc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h +--- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_pmc.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h Fri May 11 16:45:00 2007 +@@ -37,7 +37,9 @@ + #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ + #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ + +-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */ ++#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL only] */ ++ ++#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ + #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ + #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ + #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h +--- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91sam9260_matrix.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h Fri May 11 16:20:33 2007 +@@ -67,7 +67,7 @@ + #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ + #define AT91_MATRIX_CS4A_SMC (0 << 4) + #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +-#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */ ++#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ + #define AT91_MATRIX_CS5A_SMC (0 << 5) + #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) + #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/board.h linux-2.6-stable/include/asm-arm/arch-at91/board.h +--- linux-2.6.22-rc1/include/asm-arm/arch-at91/board.h Thu May 17 12:13:17 2007 ++++ linux-2.6-stable/include/asm-arm/arch-at91/board.h Thu May 10 12:21:10 2007 +@@ -124,9 +124,21 @@ + }; + extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); + ++ /* ISI */ ++extern void __init at91_add_device_isi(void); ++ + /* LEDs */ + extern u8 at91_leds_cpu; + extern u8 at91_leds_timer; + extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); + ++struct at91_gpio_led { ++ u8 index; /* index of LED */ ++ char* name; /* name of LED */ ++ u8 gpio; /* AT91_PIN_xx */ ++ u8 flags; /* 1=active-high */ ++ char* trigger; /* default trigger */ ++}; ++extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr); ++ + #endif +diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/ics1523.h linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h +--- linux-2.6.22-rc1/include/asm-arm/arch-at91/ics1523.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h Mon May 14 13:49:47 2007 +@@ -0,0 +1,154 @@ ++//*---------------------------------------------------------------------------- ++//* ATMEL Microcontroller Software Support - ROUSSET - ++//*---------------------------------------------------------------------------- ++//* The software is delivered "AS IS" without warranty or condition of any ++//* kind, either express, implied or statutory. This includes without ++//* limitation any warranty or condition with respect to merchantability or ++//* fitness for any particular purpose, or against the infringements of ++//* intellectual property rights of others. ++//*---------------------------------------------------------------------------- ++//* File Name : ics1523.h ++//* Object : Clock Generator Prototyping File. ++//* ++//* 1.0 08/28/02 ED : Creation ++//* 1.2 13/01/03 FB : Update on lib V3 ++//*---------------------------------------------------------------------------- ++ ++#ifndef ics1523_h ++#define ics1523_h ++ ++/*-------------------------------------------*/ ++/* ICS1523 TWI Serial Clock Definition */ ++/*-------------------------------------------*/ ++ ++#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */ ++#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */ ++#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */ ++ ++#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */ ++#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */ ++ ++/*-------------------------------------------*/ ++/* ICS1523 Write Operation Definition */ ++/*-------------------------------------------*/ ++ ++#define ICS1523_ACCESS_OK 0 /* OK */ ++#define ICS1523_ACCESS_ERROR -1 /* NOK */ ++ ++/*-------------------------------------------*/ ++/* ICS1523 Device Addresses Definition */ ++/*-------------------------------------------*/ ++ ++#define ICS_ADDR 0x26 /* Device Address */ ++ ++/*--------------------------------------------------*/ ++/* ICS1523 Registers Internal Addresses Definition */ ++/*--------------------------------------------------*/ ++ ++#define ICS_ICR 0x0 /* Input Control Register */ ++#define ICS_LCR 0x1 /* Loop Control Register */ ++#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */ ++#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */ ++#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */ ++#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */ ++#define ICS_OE 0x6 /* Output Enables Register */ ++#define ICS_OD 0x7 /* Osc Divider Register */ ++#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */ ++#define ICS_VID 0x10 /* Chip Version Register */ ++#define ICS_RID 0x11 /* Chip Revision Register */ ++#define ICS_SR 0x12 /* Status Register */ ++ ++/*------------------------------------------------------*/ ++/* ICS1523 Input Control Register Bits Definition */ ++/*------------------------------------------------------*/ ++ ++#define ICS_PDEN 0x1 /* Phase Detector Enable */ ++#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */ ++#define ICS_REFPOL 0x4 /* External Reference Polarity */ ++#define ICS_FBKPOL 0x8 /* External Feedback Polarity */ ++#define ICS_FBKSEL 0x10 /* External Feedback Select */ ++#define ICS_FUNCSEL 0x20 /* Function Out Select */ ++#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */ ++#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */ ++ ++/*-----------------------------------------------------*/ ++/* ICS1523 Loop Control Register Bits Definition */ ++/*-----------------------------------------------------*/ ++ ++#define ICS_PFD 0x7 /* Phase Detector Gain */ ++#define ICS_PSD 0x30 /* Post-Scaler Divider */ ++ ++/*----------------------------------------------------*/ ++/* ICS1523 PLL FeedBack Divider LSBs Definition */ ++/*----------------------------------------------------*/ ++ ++#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */ ++ ++/*----------------------------------------------------*/ ++/* ICS1523 PLL FeedBack Divider MSBs Definition */ ++/*----------------------------------------------------*/ ++ ++#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */ ++ ++/*------------------------------------------------------------*/ ++/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */ ++/*------------------------------------------------------------*/ ++ ++#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */ ++#define ICS_FILSEL 0x80 /* Loop Filter Select */ ++ ++/*----------------------------------------------------------------*/ ++/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */ ++/*----------------------------------------------------------------*/ ++ ++#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */ ++#define ICS_MMREV 0xFC /* Metal Mask Revision Number */ ++ ++/*-------------------------------------------------------*/ ++/* ICS1523 Output Enables Register Bits Definition */ ++/*-------------------------------------------------------*/ ++ ++#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */ ++#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */ ++#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */ ++#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */ ++#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */ ++#define ICS_CLK2INV 0x20 /* CLK/2 Invert */ ++#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */ ++ ++/*----------------------------------------------------*/ ++/* ICS1523 Osc Divider Register Bits Definition */ ++/*----------------------------------------------------*/ ++ ++#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */ ++#define ICS_INSEL 0x80 /* Input Select */ ++ ++/*---------------------------------------------------*/ ++/* ICS1523 DPA & PLL Reset Register Definition */ ++/*---------------------------------------------------*/ ++ ++#define ICS_DPAR 0x0A /* DPA Reset Command */ ++#define ICS_PLLR 0x50 /* PLL Reset Command */ ++ ++/*------------------------------------------------*/ ++/* ICS1523 Chip Version Register Definition */ ++/*------------------------------------------------*/ ++ ++#define ICS_CHIPV 0xFF /* Chip Version */ ++ ++/*-------------------------------------------------*/ ++/* ICS1523 Chip Revision Register Definition */ ++/*-------------------------------------------------*/ ++ ++#define ICS_CHIPR 0xFF /* Chip Revision */ ++ ++/*------------------------------------------*/ ++/* ICS1523 Status Register Definition */ ++/*------------------------------------------*/ ++ ++#define ICS_DPALOCK 0x1 /* DPA Lock Status */ ++#define ICS_PLLLOCK 0x2 /* PLL Lock Status */ ++ ++int at91_ics1523_init(void); ++ ++#endif /* ics1523_h */ +diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/spi.h linux-2.6-stable/include/asm-arm/arch-at91/spi.h +--- linux-2.6.22-rc1/include/asm-arm/arch-at91/spi.h Thu Jan 1 02:00:00 1970 ++++ linux-2.6-stable/include/asm-arm/arch-at91/spi.h Mon May 14 13:49:47 2007 +@@ -0,0 +1,54 @@ ++/* ++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 ++ * ++ * (c) SAN People (Pty) Ltd ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#ifndef AT91_LEGACY_SPI_H ++#define AT91_LEGACY_SPI_H ++ ++#define SPI_MAJOR 153 /* registered device number */ ++ ++#define DEFAULT_SPI_CLK 6000000 ++ ++ ++/* Maximum number of buffers in a single SPI transfer. ++ * DataFlash uses maximum of 2 ++ * spidev interface supports up to 8. ++ */ ++#define MAX_SPI_TRANSFERS 8 ++#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */ ++ ++/* ++ * Describes the buffers for a SPI transfer. ++ * A transmit & receive buffer must be specified for each transfer ++ */ ++struct spi_transfer_list { ++ void* tx[MAX_SPI_TRANSFERS]; /* transmit */ ++ int txlen[MAX_SPI_TRANSFERS]; ++ void* rx[MAX_SPI_TRANSFERS]; /* receive */ ++ int rxlen[MAX_SPI_TRANSFERS]; ++ int nr_transfers; /* number of transfers */ ++ int curr; /* current transfer */ ++}; ++ ++struct spi_local { ++ unsigned int pcs; /* Peripheral Chip Select value */ ++ ++ struct spi_transfer_list *xfers; /* current transfer list */ ++ dma_addr_t tx, rx; /* DMA address for current transfer */ ++ dma_addr_t txnext, rxnext; /* DMA address for next transfer */ ++}; ++ ++ ++/* Exported functions */ ++extern void spi_access_bus(short device); ++extern void spi_release_bus(short device); ++extern int spi_transfer(struct spi_transfer_list* list); ++ ++#endif +diff -urN -x CVS linux-2.6.22-rc1/include/linux/clk.h linux-2.6-stable/include/linux/clk.h +--- linux-2.6.22-rc1/include/linux/clk.h Thu Apr 26 05:08:32 2007 ++++ linux-2.6-stable/include/linux/clk.h Tue May 8 12:13:31 2007 +@@ -121,4 +121,24 @@ + */ + struct clk *clk_get_parent(struct clk *clk); + ++/** ++ * clk_must_disable - report whether a clock's users must disable it ++ * @clk: one node in the clock tree ++ * ++ * This routine returns true only if the upcoming system state requires ++ * disabling the specified clock. ++ * ++ * It's common for platform power states to constrain certain clocks (and ++ * their descendants) to be unavailable, while other states allow that ++ * clock to be active. A platform's power states often include an "all on" ++ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and ++ * operating states which sacrifice functionality for lower power usage. ++ * ++ * The constraint value is commonly tested in device driver suspend(), to ++ * leave clocks active if they are needed for features like wakeup events. ++ * On platforms that support reduced functionality operating states, the ++ * constraint may also need to be tested during resume() and probe() calls. ++ */ ++int clk_must_disable(struct clk *clk); ++ + #endif +diff -urN -x CVS linux-2.6.22-rc1/include/linux/i2c-id.h linux-2.6-stable/include/linux/i2c-id.h +--- linux-2.6.22-rc1/include/linux/i2c-id.h Thu May 17 12:13:23 2007 ++++ linux-2.6-stable/include/linux/i2c-id.h Mon May 14 10:18:35 2007 +@@ -203,6 +203,7 @@ + + /* --- PCA 9564 based algorithms */ + #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */ ++#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */ + + /* --- ACPI Embedded controller algorithms */ + #define I2C_HW_ACPI_EC 0x1f0000 +diff -urN -x CVS linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c +--- linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c Thu May 17 12:13:36 2007 ++++ linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c Mon May 14 10:19:04 2007 +@@ -34,8 +34,7 @@ + #include <sound/soc.h> + #include <sound/soc-dapm.h> + +-#include <asm/arch/hardware.h> +-#include <asm/arch/at91_pio.h> ++#include <asm/hardware.h> + #include <asm/arch/gpio.h> + + #include "../codecs/wm8731.h" +@@ -48,13 +47,6 @@ + #define DBG(x...) + #endif + +-#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32) +-#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32) +-#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32) +-#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32) +-#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32) +-#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32) +- + static struct clk *pck1_clk; + static struct clk *pllb_clk; + +@@ -277,7 +269,6 @@ + static int __init eti_b1_init(void) + { + int ret; +- u32 ssc_pio_lines; + struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data; + + if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) { +@@ -311,19 +302,12 @@ + goto fail_io_unmap; + } + +- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1 +- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1; +- +- /* Reset all PIO registers and assign lines to peripheral A */ +- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines); +- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines); ++ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */ ++ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */ ++/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */ ++ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */ + + /* + * Set PCK1 parent to PLLB and its rate to 12 Mhz. +diff -urN linux-2.6.22-rc5/drivers/char/at91_spi.c linux-2.6.22-rc5.new/drivers/char/at91_spi.c +--- linux-2.6.22-rc5/drivers/char/at91_spi.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/drivers/char/at91_spi.c 2007-07-29 05:55:39.000000000 +0200 +@@ -0,0 +1,336 @@ ++/* ++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder) ++ * ++ * Copyright (C) SAN People (Pty) Ltd ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include <linux/init.h> ++#include <linux/dma-mapping.h> ++#include <linux/module.h> ++#include <linux/sched.h> ++#include <linux/completion.h> ++#include <linux/interrupt.h> ++#include <linux/clk.h> ++#include <linux/platform_device.h> ++#include <linux/atmel_pdc.h> ++#include <asm/io.h> ++#include <asm/semaphore.h> ++ ++#include <asm/arch/at91_spi.h> ++#include <asm/arch/board.h> ++#include <asm/arch/spi.h> ++ ++#undef DEBUG_SPI ++ ++static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */ ++static int spi_enabled = 0; ++static struct semaphore spi_lock; /* protect access to SPI bus */ ++static int current_device = -1; /* currently selected SPI device */ ++static struct clk *spi_clk; /* SPI clock */ ++static void __iomem *spi_base; /* SPI peripheral base-address */ ++ ++DECLARE_COMPLETION(transfer_complete); ++ ++ ++#define at91_spi_read(reg) __raw_readl(spi_base + (reg)) ++#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg)) ++ ++ ++/* ......................................................................... */ ++ ++/* ++ * Access and enable the SPI bus. ++ * This MUST be called before any transfers are performed. ++ */ ++void spi_access_bus(short device) ++{ ++ /* Ensure that requested device is valid */ ++ if ((device < 0) || (device >= NR_SPI_DEVICES)) ++ panic("at91_spi: spi_access_bus called with invalid device"); ++ ++ if (spi_enabled == 0) { ++ clk_enable(spi_clk); /* Enable Peripheral clock */ ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */ ++#ifdef DEBUG_SPI ++ printk("SPI on\n"); ++#endif ++ } ++ spi_enabled++; ++ ++ /* Lock the SPI bus */ ++ down(&spi_lock); ++ current_device = device; ++ ++ /* Configure SPI bus for device */ ++ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16)); ++} ++ ++/* ++ * Relinquish control of the SPI bus. ++ */ ++void spi_release_bus(short device) ++{ ++ if (device != current_device) ++ panic("at91_spi: spi_release called with invalid device"); ++ ++ /* Release the SPI bus */ ++ current_device = -1; ++ up(&spi_lock); ++ ++ spi_enabled--; ++ if (spi_enabled == 0) { ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */ ++ clk_disable(spi_clk); /* Disable Peripheral clock */ ++#ifdef DEBUG_SPI ++ printk("SPI off\n"); ++#endif ++ } ++} ++ ++/* ++ * Perform a data transfer over the SPI bus ++ */ ++int spi_transfer(struct spi_transfer_list* list) ++{ ++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device]; ++ int tx_size; ++ ++ if (!list) ++ panic("at91_spi: spi_transfer called with NULL transfer list"); ++ if (current_device == -1) ++ panic("at91_spi: spi_transfer called without acquiring bus"); ++ ++#ifdef DEBUG_SPI ++ printk("SPI transfer start [%i]\n", list->nr_transfers); ++#endif ++ ++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */ ++ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1; ++ ++ /* Store transfer list */ ++ device->xfers = list; ++ list->curr = 0; ++ ++ /* Assume there must be at least one transfer */ ++ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE); ++ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE); ++ ++ /* Program PDC registers */ ++ at91_spi_write(ATMEL_PDC_TPR, device->tx); ++ at91_spi_write(ATMEL_PDC_RPR, device->rx); ++ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size); ++ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size); ++ ++ /* Is there a second transfer? */ ++ if (list->nr_transfers > 1) { ++ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE); ++ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE); ++ ++ /* Program Next PDC registers */ ++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext); ++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext); ++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size); ++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size); ++ } ++ else { ++ device->txnext = 0; ++ device->rxnext = 0; ++ at91_spi_write(ATMEL_PDC_TNCR, 0); ++ at91_spi_write(ATMEL_PDC_RNCR, 0); ++ } ++ ++ // TODO: If we are doing consecutive transfers (at high speed, or ++ // small buffers), then it might be worth modifying the 'Delay between ++ // Consecutive Transfers' in the CSR registers. ++ // This is an issue if we cannot chain the next buffer fast enough ++ // in the interrupt handler. ++ ++ /* Enable transmitter and receiver */ ++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN); ++ ++ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */ ++ wait_for_completion(&transfer_complete); ++ ++#ifdef DEBUG_SPI ++ printk("SPI transfer end\n"); ++#endif ++ ++ return 0; ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Handle interrupts from the SPI controller. ++ */ ++static irqreturn_t at91spi_interrupt(int irq, void *dev_id) ++{ ++ unsigned int status; ++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device]; ++ struct spi_transfer_list *list = device->xfers; ++ ++#ifdef DEBUG_SPI ++ printk("SPI interrupt %i\n", current_device); ++#endif ++ ++ if (!list) ++ panic("at91_spi: spi_interrupt with a NULL transfer list"); ++ ++ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */ ++ ++ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE); ++ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE); ++ ++ device->tx = device->txnext; /* move next transfer to current transfer */ ++ device->rx = device->rxnext; ++ ++ list->curr = list->curr + 1; ++ if (list->curr == list->nr_transfers) { /* all transfers complete */ ++ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */ ++ ++ /* Disable transmitter and receiver */ ++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); ++ ++ device->xfers = NULL; ++ complete(&transfer_complete); ++ } ++ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */ ++ device->txnext = 0; ++ device->rxnext = 0; ++ at91_spi_write(ATMEL_PDC_TNCR, 0); ++ at91_spi_write(ATMEL_PDC_RNCR, 0); ++ } ++ else { ++ int i = (list->curr)+1; ++ ++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */ ++ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1; ++ ++ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE); ++ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE); ++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext); ++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext); ++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size); ++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size); ++ } ++ return IRQ_HANDLED; ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Initialize the SPI controller ++ */ ++static int __init at91spi_probe(struct platform_device *pdev) ++{ ++ int i; ++ unsigned long scbr; ++ struct resource *res; ++ ++ init_MUTEX(&spi_lock); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) ++ return -ENXIO; ++ ++ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi")) ++ return -EBUSY; ++ ++ spi_base = ioremap(res->start, res->end - res->start + 1); ++ if (!spi_base) { ++ release_mem_region(res->start, res->end - res->start + 1); ++ return -ENOMEM; ++ } ++ ++ spi_clk = clk_get(NULL, "spi_clk"); ++ if (IS_ERR(spi_clk)) { ++ printk(KERN_ERR "at91_spi: no clock defined\n"); ++ iounmap(spi_base); ++ release_mem_region(res->start, res->end - res->start + 1); ++ return -ENODEV; ++ } ++ ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */ ++ ++ /* ++ * Calculate the correct SPI baud-rate divisor. ++ */ ++ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK); ++ scbr = scbr + 1; /* round up */ ++ ++ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr)); ++ ++ /* Set Chip Select registers to good defaults */ ++ for (i = 0; i < 4; i++) { ++ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8)); ++ } ++ ++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); ++ ++ memset(&spi_dev, 0, sizeof(spi_dev)); ++ spi_dev[0].pcs = 0xE; ++ spi_dev[1].pcs = 0xD; ++ spi_dev[2].pcs = 0xB; ++ spi_dev[3].pcs = 0x7; ++ ++ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) { ++ clk_put(spi_clk); ++ iounmap(spi_base); ++ release_mem_region(res->start, res->end - res->start + 1); ++ return -EBUSY; ++ } ++ ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */ ++ ++ return 0; ++} ++ ++static int __devexit at91spi_remove(struct platform_device *pdev) ++{ ++ struct resource *res; ++ ++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */ ++ clk_put(spi_clk); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ iounmap(spi_base); ++ release_mem_region(res->start, res->end - res->start + 1); ++ ++ free_irq(AT91RM9200_ID_SPI, 0); ++ return 0; ++} ++ ++static struct platform_driver at91spi_driver = { ++ .probe = at91spi_probe, ++ .remove = __devexit_p(at91spi_remove), ++ .driver = { ++ .name = "at91_spi", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init at91spi_init(void) ++{ ++ return platform_driver_register(&at91spi_driver); ++} ++ ++static void __exit at91spi_exit(void) ++{ ++ platform_driver_unregister(&at91spi_driver); ++} ++ ++EXPORT_SYMBOL(spi_access_bus); ++EXPORT_SYMBOL(spi_release_bus); ++EXPORT_SYMBOL(spi_transfer); ++ ++module_init(at91spi_init); ++module_exit(at91spi_exit); ++ ++MODULE_LICENSE("GPL") ++MODULE_AUTHOR("Andrew Victor") ++MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200") +diff -urN linux-2.6.22-rc5/drivers/char/at91_spidev.c linux-2.6.22-rc5.new/drivers/char/at91_spidev.c +--- linux-2.6.22-rc5/drivers/char/at91_spidev.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/drivers/char/at91_spidev.c 2007-07-29 05:55:39.000000000 +0200 +@@ -0,0 +1,236 @@ ++/* ++ * User-space interface to the SPI bus on Atmel AT91RM9200 ++ * ++ * Copyright (C) 2003 SAN People (Pty) Ltd ++ * ++ * Based on SPI driver by Rick Bronson ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/highmem.h> ++#include <linux/pagemap.h> ++#include <asm/arch/spi.h> ++ ++#ifdef CONFIG_DEVFS_FS ++#include <linux/devfs_fs_kernel.h> ++#endif ++ ++ ++#undef DEBUG_SPIDEV ++ ++/* ......................................................................... */ ++ ++/* ++ * Read or Write to SPI bus. ++ */ ++static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset) ++{ ++ unsigned int spi_device = (unsigned int) file->private_data; ++ ++ struct mm_struct * mm; ++ struct page ** maplist; ++ struct spi_transfer_list* list; ++ int pgcount; ++ ++ unsigned int ofs, pagelen; ++ int res, i, err; ++ ++ if (!count) { ++ return 0; ++ } ++ ++ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL); ++ if (!list) { ++ return -ENOMEM; ++ } ++ ++ mm = current->mm; ++ ++ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE; ++ ++ if (pgcount >= MAX_SPI_TRANSFERS) { ++ kfree(list); ++ return -EFBIG; ++ } ++ ++ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL); ++ ++ if (!maplist) { ++ kfree(list); ++ return -ENOMEM; ++ } ++ flush_cache_all(); ++ down_read(&mm->mmap_sem); ++ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL); ++ up_read(&mm->mmap_sem); ++ ++ if (err < 0) { ++ kfree(list); ++ kfree(maplist); ++ return err; ++ } ++ pgcount = err; ++ ++#ifdef DEBUG_SPIDEV ++ printk("spidev_rd_rw: %i %i\n", count, pgcount); ++#endif ++ ++ /* Set default return value = transfer length */ ++ res = count; ++ ++ /* ++ * At this point, the virtual area buf[0] .. buf[count-1] will have ++ * corresponding pages mapped in the physical memory and locked until ++ * we unmap the kiobuf. The pages cannot be swapped out or moved ++ * around. ++ */ ++ ofs = (unsigned long) buf & (PAGE_SIZE -1); ++ pagelen = PAGE_SIZE - ofs; ++ if (count < pagelen) ++ pagelen = count; ++ ++ for (i = 0; i < pgcount; i++) { ++ flush_dcache_page(maplist[i]); ++ ++ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs; ++ list->txlen[i] = list->rxlen[i] = pagelen; ++ ++#ifdef DEBUG_SPIDEV ++ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]); ++#endif ++ ++ ofs = 0; /* all subsequent transfers start at beginning of a page */ ++ count = count - pagelen; ++ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE; ++ } ++ list->nr_transfers = pgcount; ++ ++ /* Perform transfer on SPI bus */ ++ spi_access_bus(spi_device); ++ spi_transfer(list); ++ spi_release_bus(spi_device); ++ ++ while (pgcount--) { ++ page_cache_release (maplist[pgcount]); ++ } ++ flush_cache_all(); ++ ++ kfree(maplist); ++ kfree(list); ++ ++ return res; ++} ++ ++static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int spi_device = MINOR(inode->i_rdev); ++ ++ if (spi_device >= NR_SPI_DEVICES) ++ return -ENODEV; ++ ++ // TODO: This interface can be used to configure the SPI bus. ++ // Configurable options could include: Speed, Clock Polarity, Clock Phase ++ ++ switch(cmd) { ++ default: ++ return -ENOIOCTLCMD; ++ } ++} ++ ++/* ++ * Open the SPI device ++ */ ++static int spidev_open(struct inode *inode, struct file *file) ++{ ++ unsigned int spi_device = MINOR(inode->i_rdev); ++ ++ if (spi_device >= NR_SPI_DEVICES) ++ return -ENODEV; ++ ++ /* ++ * 'private_data' is actually a pointer, but we overload it with the ++ * value we want to store. ++ */ ++ file->private_data = (void *)spi_device; ++ ++ return 0; ++} ++ ++/* ++ * Close the SPI device ++ */ ++static int spidev_close(struct inode *inode, struct file *file) ++{ ++ return 0; ++} ++ ++/* ......................................................................... */ ++ ++static struct file_operations spidev_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .read = spidev_rd_wr, ++ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr, ++ .ioctl = spidev_ioctl, ++ .open = spidev_open, ++ .release = spidev_close, ++}; ++ ++/* ++ * Install the SPI /dev interface driver ++ */ ++static int __init at91_spidev_init(void) ++{ ++#ifdef CONFIG_DEVFS_FS ++ int i; ++#endif ++ ++ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) { ++ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR); ++ return -EIO; ++ } ++ ++#ifdef CONFIG_DEVFS_FS ++ devfs_mk_dir("spi"); ++ for (i = 0; i < NR_SPI_DEVICES; i++) { ++ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i); ++ } ++#endif ++ printk(KERN_INFO "AT91 SPI driver loaded\n"); ++ ++ return 0; ++} ++ ++/* ++ * Remove the SPI /dev interface driver ++ */ ++static void __exit at91_spidev_exit(void) ++{ ++#ifdef CONFIG_DEVFS_FS ++ int i; ++ for (i = 0; i < NR_SPI_DEVICES; i++) { ++ devfs_remove("spi/%d", i); ++ } ++ ++ devfs_remove("spi"); ++#endif ++ ++ if (unregister_chrdev(SPI_MAJOR, "spi")) { ++ printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR); ++ return; ++ } ++} ++ ++module_init(at91_spidev_init); ++module_exit(at91_spidev_exit); ++ ++MODULE_LICENSE("GPL") ++MODULE_AUTHOR("Andrew Victor") ++MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200") +diff -urN linux-2.6.22-rc5/drivers/char/Kconfig linux-2.6.22-rc5.new/drivers/char/Kconfig +--- linux-2.6.22-rc5/drivers/char/Kconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/char/Kconfig 2007-07-29 05:55:39.000000000 +0200 +@@ -1083,5 +1083,21 @@ + + source "drivers/s390/char/Kconfig" + ++config AT91_SPI ++ bool "SPI driver (legacy) for AT91RM9200 processors" ++ depends on ARCH_AT91RM9200 ++ default y ++ help ++ The SPI driver gives access to this serial bus on the AT91RM9200 ++ processor. ++ ++config AT91_SPIDEV ++ bool "SPI device interface (legacy) for AT91RM9200 processors" ++ depends on ARCH_AT91RM9200 && AT91_SPI ++ default n ++ help ++ The SPI driver gives user mode access to this serial ++ bus on the AT91RM9200 processor. ++ + endmenu + +diff -urN linux-2.6.22-rc5/drivers/char/Makefile linux-2.6.22-rc5.new/drivers/char/Makefile +--- linux-2.6.22-rc5/drivers/char/Makefile 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/char/Makefile 2007-07-29 05:55:39.000000000 +0200 +@@ -93,6 +93,8 @@ + obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o + obj-$(CONFIG_GPIO_TB0219) += tb0219.o + obj-$(CONFIG_TELCLOCK) += tlclk.o ++obj-$(CONFIG_AT91_SPI) += at91_spi.o ++obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o + + obj-$(CONFIG_WATCHDOG) += watchdog/ + obj-$(CONFIG_MWAVE) += mwave/ +diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-at91.c +--- linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-at91.c 2007-07-29 05:55:39.000000000 +0200 +@@ -31,8 +31,11 @@ + #include <asm/arch/board.h> + #include <asm/arch/cpu.h> + +-#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ + ++/* Clockrate is configurable - max 400 Kbits/sec */ ++static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE; ++module_param(clockrate, uint, 0); ++MODULE_PARM_DESC(clockrate, "The TWI clockrate"); + + static struct clk *twi_clk; + static void __iomem *twi_base; +@@ -53,7 +56,7 @@ + at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ + + /* Calcuate clock dividers */ +- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3; ++ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3; + cdiv = cdiv + 1; /* round up */ + ckdiv = 0; + while (cdiv > 255) { +@@ -61,11 +64,12 @@ + cdiv = cdiv >> 1; + } + +- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */ +- if (ckdiv > 5) { +- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n"); +- ckdiv = 5; +- } ++ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */ ++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n"); ++ ckdiv = 5; ++ } else if (ckdiv > 7) { ++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n"); ++ ckdiv = 7; + } + + at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); +diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-pca.c linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-pca.c +--- linux-2.6.22-rc5/drivers/i2c/busses/i2c-pca.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-pca.c 2007-07-29 05:55:39.000000000 +0200 +@@ -0,0 +1,213 @@ ++/* ++ * Platform driver for PCA9564 I2C bus controller. ++ * ++ * (C) 2006 Andrew Victor ++ * ++ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards ++ * Copyright (C) 2004 Arcom Control Systems ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/delay.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/wait.h> ++#include <linux/platform_device.h> ++ ++#include <linux/i2c.h> ++#include <linux/i2c-algo-pca.h> ++ ++#include <asm/io.h> ++ ++#include "../algos/i2c-algo-pca.h" ++ ++#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */ ++#define PCA_CLOCK I2C_PCA_CON_59kHz ++ ++//#define REG_SHIFT 2 ++#define REG_SHIFT 0 ++ ++//#define DEBUG_IO ++ ++#define PCA_IO_SIZE 4 ++ ++static void __iomem *base_addr; ++static int irq; ++static wait_queue_head_t pca_wait; ++ ++static int pca_getown(struct i2c_algo_pca_data *adap) ++{ ++ return PCA_OWN_ADDRESS; ++} ++ ++static int pca_getclock(struct i2c_algo_pca_data *adap) ++{ ++ return PCA_CLOCK; ++} ++ ++static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val) ++{ ++#ifdef DEBUG_IO ++ static char *names[] = { "T/O", "DAT", "ADR", "CON" }; ++ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val); ++#endif ++ udelay(1); ++ outb(val, base_addr + (reg << REG_SHIFT)); ++} ++ ++static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg) ++{ ++ int res; ++ ++ udelay(1); ++ res = inb(base_addr + (reg << REG_SHIFT)); ++#ifdef DEBUG_IO ++ { ++ static char *names[] = { "STA", "DAT", "ADR", "CON" }; ++ printk("*** read %s => %#04x\n", names[reg], res); ++ } ++#endif ++ return res; ++} ++ ++static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap) ++{ ++ int ret = 0; ++ ++ if (irq > -1) { ++ ret = wait_event_interruptible(pca_wait, ++ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI); ++ } else { ++ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) ++ udelay(100); ++ } ++ return ret; ++} ++ ++static irqreturn_t pca_handler(int this_irq, void *dev_id) ++{ ++ wake_up_interruptible(&pca_wait); ++ return IRQ_HANDLED; ++} ++ ++static struct i2c_algo_pca_data pca_i2c_data = { ++ .get_own = pca_getown, ++ .get_clock = pca_getclock, ++ .write_byte = pca_writebyte, ++ .read_byte = pca_readbyte, ++ .wait_for_interrupt = pca_waitforinterrupt, ++}; ++ ++static struct i2c_adapter pca_i2c_ops = { ++ .owner = THIS_MODULE, ++ .id = I2C_HW_A_PLAT, ++ .algo_data = &pca_i2c_data, ++ .name = "PCA9564", ++ .class = I2C_CLASS_HWMON, ++}; ++ ++static int __devinit pca_i2c_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ ++ init_waitqueue_head(&pca_wait); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) ++ return -ENODEV; ++ ++ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564")) ++ return -ENXIO; ++ ++ base_addr = ioremap(res->start, PCA_IO_SIZE); ++ if (base_addr == NULL) ++ goto out_region; ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq > -1) { ++ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) { ++ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq); ++ goto out_remap; ++ } ++ } ++ ++ /* set up the driverfs linkage to our parent device */ ++ pca_i2c_ops.dev.parent = &pdev->dev; ++ ++ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) { ++ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n"); ++ goto out_irq; ++ } ++ ++ return 0; ++ ++ out_irq: ++ if (irq > -1) ++ free_irq(irq, &pca_i2c_ops); ++ ++ out_remap: ++ iounmap(base_addr); ++ ++ out_region: ++ release_mem_region(res->start, PCA_IO_SIZE); ++ return -ENODEV; ++} ++ ++static int __devexit pca_i2c_remove(struct platform_device *pdev) ++{ ++ struct resource *res; ++ ++ i2c_del_adapter(&pca_i2c_ops); ++ ++ if (irq > 0) ++ free_irq(irq, NULL); ++ ++ iounmap(base_addr); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ release_mem_region(res->start, PCA_IO_SIZE); ++ ++ return 0; ++} ++ ++static struct platform_driver pca_i2c_driver = { ++ .probe = pca_i2c_probe, ++ .remove = __devexit_p(pca_i2c_remove), ++ .driver = { ++ .name = "pca9564", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init pca_i2c_init(void) ++{ ++ return platform_driver_register(&pca_i2c_driver); ++} ++ ++static void __exit pca_i2c_exit(void) ++{ ++ platform_driver_unregister(&pca_i2c_driver); ++} ++ ++module_init(pca_i2c_init); ++module_exit(pca_i2c_exit); ++ ++MODULE_AUTHOR("Andrew Victor"); ++MODULE_DESCRIPTION("PCA9564 platform driver"); ++MODULE_LICENSE("GPL"); +diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Kconfig linux-2.6.22-rc5.new/drivers/i2c/busses/Kconfig +--- linux-2.6.22-rc5/drivers/i2c/busses/Kconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/i2c/busses/Kconfig 2007-07-29 05:55:39.000000000 +0200 +@@ -80,6 +80,14 @@ + This supports the use of the I2C interface on Atmel AT91 + processors. + ++config I2C_AT91_CLOCKRATE ++ prompt "Atmel AT91 I2C/TWI clock-rate" ++ depends on I2C_AT91 ++ int ++ default 100000 ++ help ++ Set the AT91 I2C/TWI clock-rate. ++ + config I2C_AU1550 + tristate "Au1550/Au1200 SMBus interface" + depends on SOC_AU1550 || SOC_AU1200 +@@ -598,6 +606,14 @@ + This driver can also be built as a module. If so, the module + will be called i2c-voodoo3. + ++config I2C_PCA ++ tristate "PCA9564" ++ depends on I2C ++ select I2C_ALGOPCA ++ help ++ This driver support the Philips PCA 9564 Parallel bus to I2C ++ bus controller. ++ + config I2C_PCA_ISA + tristate "PCA9564 on an ISA bus" + depends on ISA +diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Makefile linux-2.6.22-rc5.new/drivers/i2c/busses/Makefile +--- linux-2.6.22-rc5/drivers/i2c/busses/Makefile 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/i2c/busses/Makefile 2007-07-29 05:55:39.000000000 +0200 +@@ -30,6 +30,7 @@ + obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o + obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o + obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o ++obj-$(CONFIG_I2C_PCA) += i2c-pca.o + obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o + obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o + obj-$(CONFIG_I2C_PNX) += i2c-pnx.o +diff -urN linux-2.6.22-rc5/drivers/leds/Kconfig linux-2.6.22-rc5.new/drivers/leds/Kconfig +--- linux-2.6.22-rc5/drivers/leds/Kconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/leds/Kconfig 2007-07-29 05:55:39.000000000 +0200 +@@ -77,6 +77,13 @@ + This option enables support for the Soekris net4801 and net4826 error + LED. + ++config LEDS_AT91 ++ tristate "LED support using AT91 GPIOs" ++ depends on LEDS_CLASS && ARCH_AT91 && !LEDS ++ help ++ This option enables support for LEDs connected to GPIO lines ++ on AT91-based boards. ++ + config LEDS_WRAP + tristate "LED Support for the WRAP series LEDs" + depends on LEDS_CLASS && SCx200_GPIO +diff -urN linux-2.6.22-rc5/drivers/leds/leds-at91.c linux-2.6.22-rc5.new/drivers/leds/leds-at91.c +--- linux-2.6.22-rc5/drivers/leds/leds-at91.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/drivers/leds/leds-at91.c 2007-07-29 05:55:39.000000000 +0200 +@@ -0,0 +1,140 @@ ++/* ++ * AT91 GPIO based LED driver ++ * ++ * Copyright (C) 2006 David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/leds.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++static LIST_HEAD(at91_led_list); /* list of AT91 LEDs */ ++ ++struct at91_led { ++ struct led_classdev cdev; ++ struct list_head list; ++ struct at91_gpio_led *led_data; ++}; ++ ++/* ++ * Change the state of the LED. ++ */ ++static void at91_led_set(struct led_classdev *cdev, enum led_brightness value) ++{ ++ struct at91_led *led = container_of(cdev, struct at91_led, cdev); ++ short active = (value == LED_OFF); ++ ++ if (led->led_data->flags & 1) /* active high/low? */ ++ active = !active; ++ at91_set_gpio_value(led->led_data->gpio, active); ++} ++ ++static int __devexit at91_led_remove(struct platform_device *pdev) ++{ ++ struct at91_led *led; ++ ++ list_for_each_entry (led, &at91_led_list, list) ++ led_classdev_unregister(&led->cdev); ++ ++#warning "Free allocated memory" ++ // TODO: Free memory. kfree(led); ++ ++ return 0; ++} ++ ++static int __init at91_led_probe(struct platform_device *pdev) ++{ ++ int status = 0; ++ struct at91_gpio_led *pdata = pdev->dev.platform_data; ++ unsigned nr_leds; ++ struct at91_led *led; ++ ++ if (!pdata) ++ return -ENODEV; ++ ++ nr_leds = pdata->index; /* first index stores number of LEDs */ ++ ++ while (nr_leds--) { ++ led = kzalloc(sizeof(struct at91_led), GFP_KERNEL); ++ if (!led) { ++ dev_err(&pdev->dev, "No memory for device\n"); ++ status = -ENOMEM; ++ goto cleanup; ++ } ++ led->led_data = pdata; ++ led->cdev.name = pdata->name; ++ led->cdev.brightness_set = at91_led_set, ++ led->cdev.default_trigger = pdata->trigger; ++ ++ status = led_classdev_register(&pdev->dev, &led->cdev); ++ if (status < 0) { ++ dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status); ++cleanup: ++ at91_led_remove(pdev); ++ break; ++ } ++ list_add(&led->list, &at91_led_list); ++ pdata++; ++ } ++ return status; ++} ++ ++#ifdef CONFIG_PM ++static int at91_led_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct at91_led *led; ++ ++ list_for_each_entry (led, &at91_led_list, list) ++ led_classdev_suspend(&led->cdev); ++ ++ return 0; ++} ++ ++static int at91_led_resume(struct platform_device *dev) ++{ ++ struct at91_led *led; ++ ++ list_for_each_entry (led, &at91_led_list, list) ++ led_classdev_resume(&led->cdev); ++ ++ return 0; ++} ++#else ++#define at91_led_suspend NULL ++#define at91_led_resume NULL ++#endif ++ ++static struct platform_driver at91_led_driver = { ++ .probe = at91_led_probe, ++ .remove = __devexit_p(at91_led_remove), ++ .suspend = at91_led_suspend, ++ .resume = at91_led_resume, ++ .driver = { ++ .name = "at91_leds", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init at91_led_init(void) ++{ ++ return platform_driver_register(&at91_led_driver); ++} ++module_init(at91_led_init); ++ ++static void __exit at91_led_exit(void) ++{ ++ platform_driver_unregister(&at91_led_driver); ++} ++module_exit(at91_led_exit); ++ ++MODULE_DESCRIPTION("AT91 GPIO LED driver"); ++MODULE_AUTHOR("David Brownell"); ++MODULE_LICENSE("GPL"); +diff -urN linux-2.6.22-rc5/drivers/leds/Makefile linux-2.6.22-rc5.new/drivers/leds/Makefile +--- linux-2.6.22-rc5/drivers/leds/Makefile 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/leds/Makefile 2007-07-29 05:55:39.000000000 +0200 +@@ -16,6 +16,7 @@ + obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o + obj-$(CONFIG_LEDS_H1940) += leds-h1940.o + obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o ++obj-$(CONFIG_LEDS_AT91) += leds-at91.o + + # LED Triggers + obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o +diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/drivers/mmc/host/at91_mci.c +--- linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/mmc/host/at91_mci.c 2007-07-29 05:57:56.000000000 +0200 +@@ -85,7 +85,7 @@ + + #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \ + | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \ +- | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE) ++ | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE) + + #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg)) + #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg)) +@@ -560,9 +560,7 @@ + pr_debug("Status = %08X [%08X %08X %08X %08X]\n", + status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); + +- if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE | +- AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE | +- AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) { ++ if (status & AT91_MCI_ERRORS) { + if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) { + cmd->error = MMC_ERR_NONE; + } +@@ -663,15 +661,15 @@ + + int_status = at91_mci_read(host, AT91_MCI_SR); + int_mask = at91_mci_read(host, AT91_MCI_IMR); +- ++ + pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask, + int_status & int_mask); +- ++ + int_status = int_status & int_mask; + + if (int_status & AT91_MCI_ERRORS) { + completed = 1; +- ++ + if (int_status & AT91_MCI_UNRE) + pr_debug("MMC: Underrun error\n"); + if (int_status & AT91_MCI_OVRE) +@@ -819,7 +817,7 @@ + mmc->f_min = 375000; + mmc->f_max = 25000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; +- mmc->caps = MMC_CAP_BYTEBLOCK; ++ mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE; + + mmc->max_blk_size = 4095; + mmc->max_blk_count = mmc->max_req_size; +@@ -893,6 +891,8 @@ + + mmc_add_host(mmc); + ++ device_init_wakeup(&pdev->dev, 1); ++ + /* + * monitor card insertion/removal if we can + */ +@@ -922,6 +922,8 @@ + + host = mmc_priv(mmc); + ++ device_init_wakeup(&pdev->dev, 0); ++ + if (host->present != -1) { + free_irq(host->board->det_pin, host); + cancel_delayed_work(&host->mmc->detect); +@@ -949,8 +951,12 @@ + static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state) + { + struct mmc_host *mmc = platform_get_drvdata(pdev); ++ struct at91mci_host *host = mmc_priv(mmc); + int ret = 0; + ++ if (device_may_wakeup(&pdev->dev)) ++ enable_irq_wake(host->board->det_pin); ++ + if (mmc) + ret = mmc_suspend_host(mmc, state); + +@@ -960,8 +966,12 @@ + static int at91_mci_resume(struct platform_device *pdev) + { + struct mmc_host *mmc = platform_get_drvdata(pdev); ++ struct at91mci_host *host = mmc_priv(mmc); + int ret = 0; + ++ if (device_may_wakeup(&pdev->dev)) ++ disable_irq_wake(host->board->det_pin); ++ + if (mmc) + ret = mmc_resume_host(mmc); + +diff -urN linux-2.6.22-rc5/drivers/mtd/devices/at91_dataflash.c linux-2.6.22-rc5.new/drivers/mtd/devices/at91_dataflash.c +--- linux-2.6.22-rc5/drivers/mtd/devices/at91_dataflash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/drivers/mtd/devices/at91_dataflash.c 2007-07-29 05:55:39.000000000 +0200 +@@ -0,0 +1,667 @@ ++/* ++ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder) ++ * ++ * Copyright (C) SAN People (Pty) Ltd ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++*/ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/pci.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++ ++#include <asm/arch/spi.h> ++ ++#undef DEBUG_DATAFLASH ++ ++#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */ ++#undef DATAFLASH_ALWAYS_ADD_DEVICE /* always add whole device when using partitions? */ ++ ++#define OP_READ_CONTINUOUS 0xE8 ++#define OP_READ_PAGE 0xD2 ++#define OP_READ_BUFFER1 0xD4 ++#define OP_READ_BUFFER2 0xD6 ++#define OP_READ_STATUS 0xD7 ++ ++#define OP_ERASE_PAGE 0x81 ++#define OP_ERASE_BLOCK 0x50 ++ ++#define OP_TRANSFER_BUF1 0x53 ++#define OP_TRANSFER_BUF2 0x55 ++#define OP_COMPARE_BUF1 0x60 ++#define OP_COMPARE_BUF2 0x61 ++ ++#define OP_PROGRAM_VIA_BUF1 0x82 ++#define OP_PROGRAM_VIA_BUF2 0x85 ++ ++struct dataflash_local ++{ ++ int spi; /* SPI chip-select number */ ++ ++ unsigned int page_size; /* number of bytes per page */ ++ unsigned short page_offset; /* page offset in flash address */ ++}; ++ ++ ++/* Detected DataFlash devices */ ++static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES]; ++static int nr_devices = 0; ++ ++/* ......................................................................... */ ++ ++#ifdef CONFIG_MTD_PARTITIONS ++ ++static struct mtd_partition static_partitions_2M[] = ++{ ++ { ++ .name = "bootloader", ++ .offset = 0, ++ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */ ++ .mask_flags = MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 6 * 32 * 8 * 528, /* 6 sectors */ ++ }, ++ { ++ .name = "filesystem", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */ ++ } ++}; ++ ++static struct mtd_partition static_partitions_4M[] = ++{ ++ { ++ .name = "bootloader", ++ .offset = 0, ++ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */ ++ .mask_flags = MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 4 * 64 * 8 * 528, /* 4 sectors */ ++ }, ++ { ++ .name = "filesystem", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */ ++ } ++}; ++ ++#if defined(CONFIG_MACH_KAFA) ++static struct mtd_partition static_partitions_8M[] = ++{ ++ { ++ name: "romboot", ++ offset: 0, ++ size: 16 * 1056, /* 160 Kb */ ++ mask_flags: MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ name: "uboot", ++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ ++ size: 128 * 1056, /* 1 MB */ ++ }, ++ { ++ name: "kernel", ++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ ++ size: 1024 * 1056, /* 1 MB */ ++ }, ++ { ++ name: "filesystem", ++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */ ++ size: MTDPART_SIZ_FULL, ++ } ++}; ++ ++#elif defined(CONFIG_MACH_MULTMDP) ++ ++static struct mtd_partition static_partitions_8M[] = ++{ ++ { ++ .name = "bootloader", ++ .offset = 0, ++ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */ ++ .mask_flags = MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ .name = "configuration", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 20 * 1056, ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 1520 * 1056, ++ }, ++ { ++ .name = "filesystem", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, ++ } ++}; ++ ++#else ++ ++static struct mtd_partition static_partitions_8M[] = ++{ ++ { ++ .name = "bootloader", ++ .offset = 0, ++ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */ ++ .mask_flags = MTD_WRITEABLE, /* read-only */ ++ }, ++ { ++ .name = "kernel", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = 5 * 32 * 8 * 1056, /* 5 sectors */ ++ }, ++ { ++ .name = "filesystem", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */ ++ } ++}; ++#endif ++ ++static const char *part_probes[] = { "cmdlinepart", NULL, }; ++ ++#endif ++ ++/* ......................................................................... */ ++ ++/* Allocate a single SPI transfer descriptor. We're assuming that if multiple ++ SPI transfers occur at the same time, spi_access_bus() will serialize them. ++ If this is not valid, then either (i) each dataflash 'priv' structure ++ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use ++ another mechanism. */ ++static struct spi_transfer_list* spi_transfer_desc; ++ ++/* ++ * Perform a SPI transfer to access the DataFlash device. ++ */ ++static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len, ++ char* txnext, int txnext_len, char* rxnext, int rxnext_len) ++{ ++ struct spi_transfer_list* list = spi_transfer_desc; ++ ++ list->tx[0] = tx; list->txlen[0] = tx_len; ++ list->rx[0] = rx; list->rxlen[0] = rx_len; ++ ++ list->tx[1] = txnext; list->txlen[1] = txnext_len; ++ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len; ++ ++ list->nr_transfers = nr; ++ ++ return spi_transfer(list); ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Poll the DataFlash device until it is READY. ++ */ ++static void at91_dataflash_waitready(void) ++{ ++ char* command = kmalloc(2, GFP_KERNEL); ++ ++ if (!command) ++ return; ++ ++ do { ++ command[0] = OP_READ_STATUS; ++ command[1] = 0; ++ ++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0); ++ } while ((command[1] & 0x80) == 0); ++ ++ kfree(command); ++} ++ ++/* ++ * Return the status of the DataFlash device. ++ */ ++static unsigned short at91_dataflash_status(void) ++{ ++ unsigned short status; ++ char* command = kmalloc(2, GFP_KERNEL); ++ ++ if (!command) ++ return 0; ++ ++ command[0] = OP_READ_STATUS; ++ command[1] = 0; ++ ++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0); ++ status = command[1]; ++ ++ kfree(command); ++ return status; ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Erase blocks of flash. ++ */ ++static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) ++{ ++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; ++ unsigned int pageaddr; ++ char* command; ++ ++#ifdef DEBUG_DATAFLASH ++ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len); ++#endif ++ ++ /* Sanity checks */ ++ if (instr->addr + instr->len > mtd->size) ++ return -EINVAL; ++ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0)) ++ return -EINVAL; ++ if ((instr->addr % priv->page_size) != 0) ++ return -EINVAL; ++ ++ command = kmalloc(4, GFP_KERNEL); ++ if (!command) ++ return -ENOMEM; ++ ++ while (instr->len > 0) { ++ /* Calculate flash page address */ ++ pageaddr = (instr->addr / priv->page_size) << priv->page_offset; ++ ++ command[0] = OP_ERASE_PAGE; ++ command[1] = (pageaddr & 0x00FF0000) >> 16; ++ command[2] = (pageaddr & 0x0000FF00) >> 8; ++ command[3] = 0; ++#ifdef DEBUG_DATAFLASH ++ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr); ++#endif ++ ++ /* Send command to SPI device */ ++ spi_access_bus(priv->spi); ++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); ++ ++ at91_dataflash_waitready(); /* poll status until ready */ ++ spi_release_bus(priv->spi); ++ ++ instr->addr += priv->page_size; /* next page */ ++ instr->len -= priv->page_size; ++ } ++ ++ kfree(command); ++ ++ /* Inform MTD subsystem that erase is complete */ ++ instr->state = MTD_ERASE_DONE; ++ if (instr->callback) ++ instr->callback(instr); ++ ++ return 0; ++} ++ ++/* ++ * Read from the DataFlash device. ++ * from : Start offset in flash device ++ * len : Amount to read ++ * retlen : About of data actually read ++ * buf : Buffer containing the data ++ */ ++static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) ++{ ++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; ++ unsigned int addr; ++ char* command; ++ ++#ifdef DEBUG_DATAFLASH ++ printk("dataflash_read: %lli .. %lli\n", from, from+len); ++#endif ++ ++ *retlen = 0; ++ ++ /* Sanity checks */ ++ if (!len) ++ return 0; ++ if (from + len > mtd->size) ++ return -EINVAL; ++ ++ /* Calculate flash page/byte address */ ++ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size); ++ ++ command = kmalloc(8, GFP_KERNEL); ++ if (!command) ++ return -ENOMEM; ++ ++ command[0] = OP_READ_CONTINUOUS; ++ command[1] = (addr & 0x00FF0000) >> 16; ++ command[2] = (addr & 0x0000FF00) >> 8; ++ command[3] = (addr & 0x000000FF); ++#ifdef DEBUG_DATAFLASH ++ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); ++#endif ++ ++ /* Send command to SPI device */ ++ spi_access_bus(priv->spi); ++ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len); ++ spi_release_bus(priv->spi); ++ ++ *retlen = len; ++ kfree(command); ++ return 0; ++} ++ ++/* ++ * Write to the DataFlash device. ++ * to : Start offset in flash device ++ * len : Amount to write ++ * retlen : Amount of data actually written ++ * buf : Buffer containing the data ++ */ ++static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) ++{ ++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv; ++ unsigned int pageaddr, addr, offset, writelen; ++ size_t remaining; ++ u_char *writebuf; ++ unsigned short status; ++ int res = 0; ++ char* command; ++ char* tmpbuf = NULL; ++ ++#ifdef DEBUG_DATAFLASH ++ printk("dataflash_write: %lli .. %lli\n", to, to+len); ++#endif ++ ++ *retlen = 0; ++ ++ /* Sanity checks */ ++ if (!len) ++ return 0; ++ if (to + len > mtd->size) ++ return -EINVAL; ++ ++ command = kmalloc(4, GFP_KERNEL); ++ if (!command) ++ return -ENOMEM; ++ ++ pageaddr = ((unsigned)to / priv->page_size); ++ offset = ((unsigned)to % priv->page_size); ++ if (offset + len > priv->page_size) ++ writelen = priv->page_size - offset; ++ else ++ writelen = len; ++ writebuf = (u_char *)buf; ++ remaining = len; ++ ++ /* Allocate temporary buffer */ ++ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL); ++ if (!tmpbuf) { ++ kfree(command); ++ return -ENOMEM; ++ } ++ ++ /* Gain access to the SPI bus */ ++ spi_access_bus(priv->spi); ++ ++ while (remaining > 0) { ++#ifdef DEBUG_DATAFLASH ++ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen); ++#endif ++ ++ /* (1) Transfer to Buffer1 */ ++ if (writelen != priv->page_size) { ++ addr = pageaddr << priv->page_offset; ++ command[0] = OP_TRANSFER_BUF1; ++ command[1] = (addr & 0x00FF0000) >> 16; ++ command[2] = (addr & 0x0000FF00) >> 8; ++ command[3] = 0; ++#ifdef DEBUG_DATAFLASH ++ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); ++#endif ++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); ++ at91_dataflash_waitready(); ++ } ++ ++ /* (2) Program via Buffer1 */ ++ addr = (pageaddr << priv->page_offset) + offset; ++ command[0] = OP_PROGRAM_VIA_BUF1; ++ command[1] = (addr & 0x00FF0000) >> 16; ++ command[2] = (addr & 0x0000FF00) >> 8; ++ command[3] = (addr & 0x000000FF); ++#ifdef DEBUG_DATAFLASH ++ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); ++#endif ++ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen); ++ at91_dataflash_waitready(); ++ ++ /* (3) Compare to Buffer1 */ ++ addr = pageaddr << priv->page_offset; ++ command[0] = OP_COMPARE_BUF1; ++ command[1] = (addr & 0x00FF0000) >> 16; ++ command[2] = (addr & 0x0000FF00) >> 8; ++ command[3] = 0; ++#ifdef DEBUG_DATAFLASH ++ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); ++#endif ++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0); ++ at91_dataflash_waitready(); ++ ++ /* Get result of the compare operation */ ++ status = at91_dataflash_status(); ++ if ((status & 0x40) == 1) { ++ printk("at91_dataflash: Write error on page %i\n", pageaddr); ++ remaining = 0; ++ res = -EIO; ++ } ++ ++ remaining = remaining - writelen; ++ pageaddr++; ++ offset = 0; ++ writebuf += writelen; ++ *retlen += writelen; ++ ++ if (remaining > priv->page_size) ++ writelen = priv->page_size; ++ else ++ writelen = remaining; ++ } ++ ++ /* Release SPI bus */ ++ spi_release_bus(priv->spi); ++ ++ kfree(tmpbuf); ++ kfree(command); ++ return res; ++} ++ ++/* ......................................................................... */ ++ ++/* ++ * Initialize and register DataFlash device with MTD subsystem. ++ */ ++static int __init add_dataflash(int channel, char *name, int IDsize, ++ int nr_pages, int pagesize, int pageoffset) ++{ ++ struct mtd_info *device; ++ struct dataflash_local *priv; ++#ifdef CONFIG_MTD_PARTITIONS ++ struct mtd_partition *mtd_parts = 0; ++ int mtd_parts_nr = 0; ++#endif ++ ++ if (nr_devices >= DATAFLASH_MAX_DEVICES) { ++ printk(KERN_ERR "at91_dataflash: Too many devices detected\n"); ++ return 0; ++ } ++ ++ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL); ++ if (!device) ++ return -ENOMEM; ++ memset(device, 0, sizeof(struct mtd_info)); ++ ++ device->name = (char *)&device[1]; ++ sprintf(device->name, "%s.spi%d", name, channel); ++ device->size = nr_pages * pagesize; ++ device->erasesize = pagesize; ++ device->writesize = pagesize; ++ device->owner = THIS_MODULE; ++ device->type = MTD_DATAFLASH; ++ device->flags = MTD_WRITEABLE; ++ device->erase = at91_dataflash_erase; ++ device->read = at91_dataflash_read; ++ device->write = at91_dataflash_write; ++ ++ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL); ++ if (!priv) { ++ kfree(device); ++ return -ENOMEM; ++ } ++ memset(priv, 0, sizeof(struct dataflash_local)); ++ ++ priv->spi = channel; ++ priv->page_size = pagesize; ++ priv->page_offset = pageoffset; ++ device->priv = priv; ++ ++ mtd_devices[nr_devices] = device; ++ nr_devices++; ++ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size); ++ ++#ifdef CONFIG_MTD_PARTITIONS ++#ifdef CONFIG_MTD_CMDLINE_PARTS ++ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0); ++#endif ++ if (mtd_parts_nr <= 0) { ++ switch (IDsize) { ++ case SZ_2M: ++ mtd_parts = static_partitions_2M; ++ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M); ++ break; ++ case SZ_4M: ++ mtd_parts = static_partitions_4M; ++ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M); ++ break; ++ case SZ_8M: ++ mtd_parts = static_partitions_8M; ++ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M); ++ break; ++ } ++ } ++ ++ if (mtd_parts_nr > 0) { ++#ifdef DATAFLASH_ALWAYS_ADD_DEVICE ++ add_mtd_device(device); ++#endif ++ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr); ++ } ++#endif ++ return add_mtd_device(device); /* add whole device */ ++} ++ ++/* ++ * Detect and initialize DataFlash device connected to specified SPI channel. ++ * ++ * Device Density ID code Nr Pages Page Size Page offset ++ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 ++ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9 ++ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 ++ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 ++ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 ++ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 ++ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11 ++ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 ++ */ ++static int __init at91_dataflash_detect(int channel) ++{ ++ int res = 0; ++ unsigned short status; ++ ++ spi_access_bus(channel); ++ status = at91_dataflash_status(); ++ spi_release_bus(channel); ++ if (status != 0xff) { /* no dataflash device there */ ++ switch (status & 0x3c) { ++ case 0x0c: /* 0 0 1 1 */ ++ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9); ++ break; ++ case 0x14: /* 0 1 0 1 */ ++ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9); ++ break; ++ case 0x1c: /* 0 1 1 1 */ ++ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9); ++ break; ++ case 0x24: /* 1 0 0 1 */ ++ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9); ++ break; ++ case 0x2c: /* 1 0 1 1 */ ++ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10); ++ break; ++ case 0x34: /* 1 1 0 1 */ ++ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10); ++ break; ++ case 0x3c: /* 1 1 1 1 */ ++ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11); ++ break; ++// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands. ++// case 0x10: /* 0 1 0 0 */ ++// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11); ++// break; ++ default: ++ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c); ++ } ++ } ++ ++ return res; ++} ++ ++static int __init at91_dataflash_init(void) ++{ ++ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL); ++ if (!spi_transfer_desc) ++ return -ENOMEM; ++ ++ /* DataFlash (SPI chip select 0) */ ++ at91_dataflash_detect(0); ++ ++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD ++ /* DataFlash card (SPI chip select 3) */ ++ at91_dataflash_detect(3); ++#endif ++ ++ return 0; ++} ++ ++static void __exit at91_dataflash_exit(void) ++{ ++ int i; ++ ++ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) { ++ if (mtd_devices[i]) { ++#ifdef CONFIG_MTD_PARTITIONS ++ del_mtd_partitions(mtd_devices[i]); ++#else ++ del_mtd_device(mtd_devices[i]); ++#endif ++ kfree(mtd_devices[i]->priv); ++ kfree(mtd_devices[i]); ++ } ++ } ++ nr_devices = 0; ++ kfree(spi_transfer_desc); ++} ++ ++ ++module_init(at91_dataflash_init); ++module_exit(at91_dataflash_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Andrew Victor"); ++MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200"); +diff -urN linux-2.6.22-rc5/drivers/mtd/devices/Kconfig linux-2.6.22-rc5.new/drivers/mtd/devices/Kconfig +--- linux-2.6.22-rc5/drivers/mtd/devices/Kconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/mtd/devices/Kconfig 2007-07-29 05:55:39.000000000 +0200 +@@ -269,5 +269,11 @@ + LinuxBIOS or if you need to recover a DiskOnChip Millennium on which + you have managed to wipe the first block. + +-endmenu ++config MTD_AT91_DATAFLASH ++ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)" ++ depends on MTD && ARCH_AT91RM9200 && AT91_SPI ++ help ++ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200. ++ If you have such a board, say 'Y'. + ++endmenu +diff -urN linux-2.6.22-rc5/drivers/mtd/devices/Makefile linux-2.6.22-rc5.new/drivers/mtd/devices/Makefile +--- linux-2.6.22-rc5/drivers/mtd/devices/Makefile 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/mtd/devices/Makefile 2007-07-29 05:55:39.000000000 +0200 +@@ -18,3 +18,4 @@ + obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o + obj-$(CONFIG_MTD_DATAFLASH26) += at91_dataflash26.o + obj-$(CONFIG_MTD_M25P80) += m25p80.o ++obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o +diff -urN linux-2.6.22-rc5/drivers/net/arm/at91_ether.c linux-2.6.22-rc5.new/drivers/net/arm/at91_ether.c +--- linux-2.6.22-rc5/drivers/net/arm/at91_ether.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/net/arm/at91_ether.c 2007-07-29 05:55:39.000000000 +0200 +@@ -894,6 +894,7 @@ + skb_reserve(skb, 2); + memcpy(skb_put(skb, pktlen), p_recv, pktlen); + ++ skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + dev->last_rx = jiffies; + lp->stats.rx_bytes += pktlen; +@@ -978,14 +979,22 @@ + struct net_device *dev; + struct at91_private *lp; + unsigned int val; +- int res; ++ struct resource *res; ++ int ret; + + dev = alloc_etherdev(sizeof(struct at91_private)); + if (!dev) + return -ENOMEM; + +- dev->base_addr = AT91_VA_BASE_EMAC; +- dev->irq = AT91RM9200_ID_EMAC; ++ /* Get I/O base address and IRQ */ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ free_netdev(dev); ++ return -ENODEV; ++ } ++ dev->base_addr = res->start; ++ dev->irq = platform_get_irq(pdev, 0); ++ + SET_MODULE_OWNER(dev); + + /* Install the interrupt handler */ +@@ -1058,12 +1067,12 @@ + lp->phy_address = phy_address; /* MDI address of PHY */ + + /* Register the network interface */ +- res = register_netdev(dev); +- if (res) { ++ ret = register_netdev(dev); ++ if (ret) { + free_irq(dev->irq, dev); + free_netdev(dev); + dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); +- return res; ++ return ret; + } + + /* Determine current link speed */ +diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/drivers/serial/atmel_serial.c +--- linux-2.6.22-rc5/drivers/serial/atmel_serial.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/serial/atmel_serial.c 2007-07-29 05:55:39.000000000 +0200 +@@ -7,6 +7,8 @@ + * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * ++ * DMA support added by Chip Coldwell. ++ * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or +@@ -33,6 +35,7 @@ + #include <linux/sysrq.h> + #include <linux/tty_flip.h> + #include <linux/platform_device.h> ++#include <linux/dma-mapping.h> + #include <linux/atmel_pdc.h> + + #include <asm/io.h> +@@ -47,6 +50,11 @@ + + #include "atmel_serial.h" + ++#define SUPPORT_PDC ++#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3) ++#warning "Revisit" ++#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ ++ + #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) + #define SUPPORT_SYSRQ + #endif +@@ -107,6 +115,13 @@ + static int (*atmel_open_hook)(struct uart_port *); + static void (*atmel_close_hook)(struct uart_port *); + ++struct atmel_dma_buffer { ++ unsigned char *buf; ++ dma_addr_t dma_addr; ++ size_t dma_size; ++ unsigned int ofs; ++}; ++ + /* + * We wrap our port structure around the generic uart_port. + */ +@@ -114,10 +129,20 @@ + struct uart_port uart; /* uart */ + struct clk *clk; /* uart clock */ + unsigned short suspended; /* is port suspended? */ ++ ++ short use_dma_rx; /* enable PDC receiver */ ++ short pdc_rx_idx; /* current PDC RX buffer */ ++ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ ++ ++ short use_dma_tx; /* enable PDC transmitter */ ++ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ + }; + + static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; + ++#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx] ++#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx ++ + #ifdef SUPPORT_SYSRQ + static struct console atmel_console; + #endif +@@ -205,7 +230,12 @@ + { + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + +- UART_PUT_IDR(port, ATMEL_US_TXRDY); ++ if (atmel_port->use_dma_tx) { ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ ++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); ++ } ++ else ++ UART_PUT_IDR(port, ATMEL_US_TXRDY); + } + + /* +@@ -215,7 +245,17 @@ + { + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + +- UART_PUT_IER(port, ATMEL_US_TXRDY); ++ if (atmel_port->use_dma_tx) { ++ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) ++ /* The transmitter is already running. Yes, we ++ really need this.*/ ++ return; ++ ++ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */ ++ } ++ else ++ UART_PUT_IER(port, ATMEL_US_TXRDY); + } + + /* +@@ -225,7 +265,12 @@ + { + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + +- UART_PUT_IDR(port, ATMEL_US_RXRDY); ++ if (atmel_port->use_dma_rx) { ++ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */ ++ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); ++ } ++ else ++ UART_PUT_IDR(port, ATMEL_US_RXRDY); + } + + /* +@@ -248,6 +293,134 @@ + } + + /* ++ * Receive data via the PDC. A buffer has been fulled. ++ */ ++static void atmel_pdc_endrx(struct uart_port *port) ++{ ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; ++ struct tty_struct *tty = port->info->tty; ++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port); ++ unsigned int count; ++ ++ count = pdc->dma_size - pdc->ofs; ++ if (likely(count > 0)) { ++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); ++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); ++ tty_flip_buffer_push(tty); ++ ++ port->icount.rx += count; ++ } ++ ++ /* Set this buffer as the next receive buffer */ ++ pdc->ofs = 0; ++ UART_PUT_RNPR(port, pdc->dma_addr); ++ UART_PUT_RNCR(port, pdc->dma_size); ++ ++ /* Switch to next buffer */ ++ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */ ++} ++ ++/* ++ * Receive data via the PDC. At least one byte was received, but the ++ * buffer was not full when the inter-character timeout expired. ++ */ ++static void atmel_pdc_timeout(struct uart_port *port) ++{ ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; ++ struct tty_struct *tty = port->info->tty; ++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port); ++ /* unsigned */ int ofs, count; ++ ++ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */ ++ count = ofs - pdc->ofs; ++ ++ if (likely(count > 0)) { ++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); ++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); ++ tty_flip_buffer_push(tty); ++ ++ pdc->ofs = ofs; ++ port->icount.rx += count; ++ } ++ ++ /* reset the UART timeout */ ++ UART_PUT_CR(port, ATMEL_US_STTTO); ++} ++ ++/* ++ * Deal with parity, framing and overrun errors. ++ */ ++static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status) ++{ ++ /* clear error */ ++ UART_PUT_CR(port, ATMEL_US_RSTSTA); ++ ++ if (status & ATMEL_US_RXBRK) { ++ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */ ++ port->icount.brk++; ++ } ++ if (status & ATMEL_US_PARE) ++ port->icount.parity++; ++ if (status & ATMEL_US_FRAME) ++ port->icount.frame++; ++ if (status & ATMEL_US_OVRE) ++ port->icount.overrun++; ++} ++ ++/* ++ * A transmission via the PDC is complete. ++ */ ++static void atmel_pdc_endtx(struct uart_port *port) ++{ ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; ++ struct circ_buf *xmit = &port->info->xmit; ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; ++ ++ xmit->tail += pdc->ofs; ++ if (xmit->tail >= SERIAL_XMIT_SIZE) ++ xmit->tail -= SERIAL_XMIT_SIZE; ++ ++ port->icount.tx += pdc->ofs; ++ pdc->ofs = 0; ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(port); ++} ++ ++/* ++ * The PDC transmitter is idle, so either start the next transfer or ++ * disable the transmitter. ++ */ ++static void atmel_pdc_txbufe(struct uart_port *port) ++{ ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; ++ struct circ_buf *xmit = &port->info->xmit; ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; ++ int count; ++ ++ if (!uart_circ_empty(xmit)) { ++ /* more to transmit - setup next transfer */ ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ ++ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE); ++ ++ if (xmit->tail < xmit->head) ++ count = xmit->head - xmit->tail; ++ else ++ count = SERIAL_XMIT_SIZE - xmit->tail; ++ pdc->ofs = count; ++ ++ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); ++ UART_PUT_TCR(port, count); ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */ ++ } ++ else { ++ /* nothing left to transmit - disable the transmitter */ ++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */ ++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); ++ } ++} ++ ++/* + * Characters received (called from interrupt handler) + */ + static void atmel_rx_chars(struct uart_port *port) +@@ -349,6 +522,14 @@ + status = UART_GET_CSR(port); + pending = status & UART_GET_IMR(port); + while (pending) { ++ /* PDC receive */ ++ if (pending & ATMEL_US_ENDRX) ++ atmel_pdc_endrx(port); ++ if (pending & ATMEL_US_TIMEOUT) ++ atmel_pdc_timeout(port); ++ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE)) ++ atmel_pdc_rxerr(port, pending); ++ + /* Interrupt receive */ + if (pending & ATMEL_US_RXRDY) + atmel_rx_chars(port); +@@ -363,6 +544,12 @@ + if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC)) + wake_up_interruptible(&port->info->delta_msr_wait); + ++ /* PDC transmit */ ++ if (pending & ATMEL_US_ENDTX) ++ atmel_pdc_endtx(port); ++ if (pending & ATMEL_US_TXBUFE) ++ atmel_pdc_txbufe(port); ++ + /* Interrupt transmit */ + if (pending & ATMEL_US_TXRDY) + atmel_tx_chars(port); +@@ -401,6 +588,47 @@ + } + + /* ++ * Initialize DMA (if necessary) ++ */ ++ if (atmel_port->use_dma_rx) { ++ int i; ++ ++ for (i = 0; i < 2; i++) { ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; ++ ++ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); ++ if (pdc->buf == NULL) { ++ if (i != 0) { ++ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); ++ kfree(atmel_port->pdc_rx[0].buf); ++ } ++ free_irq(port->irq, port); ++ return -ENOMEM; ++ } ++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); ++ pdc->dma_size = PDC_BUFFER_SIZE; ++ pdc->ofs = 0; ++ } ++ ++ atmel_port->pdc_rx_idx = 0; ++ ++ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); ++ UART_PUT_RCR(port, PDC_BUFFER_SIZE); ++ ++ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); ++ UART_PUT_RNCR(port, PDC_BUFFER_SIZE); ++ } ++ if (atmel_port->use_dma_tx) { ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; ++ struct circ_buf *xmit = &port->info->xmit; ++ ++ pdc->buf = xmit->buf; ++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE); ++ pdc->dma_size = SERIAL_XMIT_SIZE; ++ pdc->ofs = 0; ++ } ++ ++ /* + * If there is a specific "open" function (to register + * control line interrupts) + */ +@@ -418,7 +646,15 @@ + UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */ + +- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */ ++ if (atmel_port->use_dma_rx) { ++ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */ ++ UART_PUT_CR(port, ATMEL_US_STTTO); ++ ++ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); ++ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */ ++ } ++ else ++ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */ + + return 0; + } +@@ -431,6 +667,31 @@ + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + + /* ++ * Ensure everything is stopped. ++ */ ++ atmel_stop_rx(port); ++ atmel_stop_tx(port); ++ ++ /* ++ * Shut-down the DMA. ++ */ ++ if (atmel_port->use_dma_rx) { ++ int i; ++ ++ for (i = 0; i < 2; i++) { ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; ++ ++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE); ++ kfree(pdc->buf); ++ } ++ } ++ if (atmel_port->use_dma_tx) { ++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; ++ ++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE); ++ } ++ ++ /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); +@@ -481,6 +742,7 @@ + */ + static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old) + { ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + unsigned long flags; + unsigned int mode, imr, quot, baud; + +@@ -490,7 +752,7 @@ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + +- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ ++ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ + quot /= 8; + mode |= ATMEL_US_USCLKS_MCK_DIV8; + } +@@ -539,6 +801,9 @@ + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= ATMEL_US_RXBRK; + ++ if (atmel_port->use_dma_rx) /* need to enable error interrupts */ ++ UART_PUT_IER(port, port->read_status_mask); ++ + /* + * Characters to ignore + */ +@@ -717,6 +982,13 @@ + clk_enable(atmel_port->clk); + port->uartclk = clk_get_rate(atmel_port->clk); + } ++ ++#ifdef SUPPORT_PDC ++ atmel_port->use_dma_rx = data->use_dma_rx; ++ atmel_port->use_dma_tx = data->use_dma_tx; ++ if (atmel_port->use_dma_tx) ++ port->fifosize = PDC_BUFFER_SIZE; ++#endif + } + + /* +@@ -893,7 +1165,8 @@ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + +- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock()) ++ if (device_may_wakeup(&pdev->dev) ++ && !clk_must_disable(atmel_port->clk)) + enable_irq_wake(port->irq); + else { + uart_suspend_port(&atmel_uart, port); +diff -urN linux-2.6.22-rc5/drivers/spi/Kconfig linux-2.6.22-rc5.new/drivers/spi/Kconfig +--- linux-2.6.22-rc5/drivers/spi/Kconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/spi/Kconfig 2007-07-29 05:55:39.000000000 +0200 +@@ -55,6 +55,7 @@ + config SPI_ATMEL + tristate "Atmel SPI Controller" + depends on (ARCH_AT91 || AVR32) && SPI_MASTER ++ select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200 + help + This selects a driver for the Atmel SPI Controller, present on + many AT32 (AVR32) and AT91 (ARM) chips. +@@ -100,6 +101,24 @@ + inexpensive battery powered microcontroller evaluation board. + This same cable can be used to flash new firmware. + ++config SPI_AT91 ++ tristate "AT91RM9200 Bitbang SPI Master" ++ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL ++ select SPI_BITBANG ++ select SPI_AT91_MANUAL_CS ++ help ++ This is dumb PIO bitbanging driver for the Atmel AT91RM9200. ++ The SPI_ATMEL driver will be its replacement, using the native ++ SPI hardware and its DMA controller. ++ ++config SPI_AT91_MANUAL_CS ++ bool ++ depends on ARCH_AT91RM9200 ++ help ++ Works around an AT91RM9200 problem whereby the SPI chip-select ++ will be wrongly disabled. The workaround uses those pins as ++ GPIOs instead of letting the SPI controller manage them. ++ + config SPI_IMX + tristate "Freescale iMX SPI controller" + depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL +diff -urN linux-2.6.22-rc5/drivers/spi/Makefile linux-2.6.22-rc5.new/drivers/spi/Makefile +--- linux-2.6.22-rc5/drivers/spi/Makefile 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/spi/Makefile 2007-07-29 05:55:39.000000000 +0200 +@@ -23,6 +23,7 @@ + obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o + obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o + obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o ++obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) +diff -urN linux-2.6.22-rc5/drivers/spi/spi_at91_bitbang.c linux-2.6.22-rc5.new/drivers/spi/spi_at91_bitbang.c +--- linux-2.6.22-rc5/drivers/spi/spi_at91_bitbang.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/drivers/spi/spi_at91_bitbang.c 2007-07-29 05:55:39.000000000 +0200 +@@ -0,0 +1,207 @@ ++/* ++ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION) ++ * ++ * Copyright (C) 2006 David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++ ++#include <linux/spi/spi.h> ++#include <linux/spi/spi_bitbang.h> ++ ++#include <asm/arch/gpio.h> ++ ++ ++/* ++ * FIXME this bitbanging version is just to help bootstrap systems until ++ * there's a native SPI+IRQ+DMA controller driver ... such a driver should ++ * be a drop-in replacement for this one, and much faster. ++ * ++ * remember: ++ * ++ * - other at91 parts (like at91sam9) have multiple controllers ++ * and different pin muxing; this version is at91rm9200 specfic. ++ * ++ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins. ++ * ++ * - rm9200 spi chipselects drop wrongly, so the native driver ++ * will need to use gpios much like this does. ++ * ++ * - real hardware only allows 8..16 bits per word, while this ++ * bitbanger allows 1..32 (incompatible superset). ++ * ++ * - this disregards clock parameters. with inlined gpio calls, ++ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster ++ * than using the subroutined veresion from txrx_word(). ++ * ++ * - suspend/resume and <linux/clk.h> support is missing ... ++ */ ++ ++#define spi_miso_bit AT91_PIN_PA0 ++#define spi_mosi_bit AT91_PIN_PA1 ++#define spi_sck_bit AT91_PIN_PA2 ++ ++struct at91_spi { ++ struct spi_bitbang bitbang; ++ struct platform_device *pdev; ++}; ++ ++/*----------------------------------------------------------------------*/ ++ ++static inline void setsck(struct spi_device *spi, int is_on) ++{ ++ at91_set_gpio_value(spi_sck_bit, is_on); ++} ++ ++static inline void setmosi(struct spi_device *spi, int is_on) ++{ ++ at91_set_gpio_value(spi_mosi_bit, is_on); ++} ++ ++static inline int getmiso(struct spi_device *spi) ++{ ++ return at91_get_gpio_value(spi_miso_bit); ++} ++ ++static void at91_spi_chipselect(struct spi_device *spi, int is_active) ++{ ++ unsigned long cs = (unsigned long) spi->controller_data; ++ ++ /* set default clock polarity */ ++ if (is_active) ++ setsck(spi, spi->mode & SPI_CPOL); ++ ++ /* only support active-low (default) */ ++ at91_set_gpio_value(cs, !is_active); ++} ++ ++/* ++ * NOTE: this is "as fast as we can"; it should be a function of ++ * the device clock ... ++ */ ++#define spidelay(X) do{} while(0) ++ ++#define EXPAND_BITBANG_TXRX ++#include <linux/spi/spi_bitbang.h> ++ ++static u32 at91_spi_txrx_word_mode0(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8); ++} ++ ++static u32 at91_spi_txrx_word_mode1(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8); ++} ++ ++static u32 at91_spi_txrx_word_mode2(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8); ++} ++ ++static u32 at91_spi_txrx_word_mode3(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8); ++} ++ ++/*----------------------------------------------------------------------*/ ++ ++static int __init at91_spi_probe(struct platform_device *pdev) ++{ ++ int status; ++ struct spi_master *master; ++ struct at91_spi *at91_spi; ++ ++ if (pdev->id != 0) /* SPI0 bus */ ++ return -EINVAL; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi); ++ if (!master) ++ return -ENOMEM; ++ ++ at91_spi = spi_master_get_devdata(master); ++ at91_spi->pdev = pdev; ++ platform_set_drvdata(pdev, at91_spi); ++ ++ /* SPI and bitbang hookup */ ++ master->bus_num = 0; ++ master->num_chipselect = 4; ++ ++ at91_spi->bitbang.master = spi_master_get(master); ++ at91_spi->bitbang.chipselect = at91_spi_chipselect; ++ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0; ++ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1; ++ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2; ++ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3; ++ ++ status = spi_bitbang_start(&at91_spi->bitbang); ++ if (status < 0) ++ (void) spi_master_put(at91_spi->bitbang.master); ++ ++ return status; ++} ++ ++static int __exit at91_spi_remove(struct platform_device *pdev) ++{ ++ struct at91_spi *at91_spi = platform_get_drvdata(pdev); ++ int status; ++ ++ /* stop() unregisters child devices too */ ++ status = spi_bitbang_stop(&at91_spi->bitbang); ++ (void) spi_master_put(at91_spi->bitbang.master); ++ ++ platform_set_drvdata(pdev, NULL); ++ return status; ++} ++ ++static struct platform_driver at91_spi_driver = { ++ .probe = at91_spi_probe, ++ .remove = __exit_p(at91_spi_remove), ++ .driver = { ++ .name = "at91_spi", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init at91_spi_init(void) ++{ ++ at91_set_gpio_output(spi_sck_bit, 0); ++ at91_set_gpio_output(spi_mosi_bit, 0); ++ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */); ++ ++ /* register driver */ ++ return platform_driver_register(&at91_spi_driver); ++} ++ ++static void __exit at91_spi_exit(void) ++{ ++ platform_driver_unregister(&at91_spi_driver); ++} ++ ++device_initcall(at91_spi_init); ++module_exit(at91_spi_exit); ++ ++MODULE_ALIAS("at91_spi.0"); ++ ++MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)"); ++MODULE_AUTHOR("David Brownell"); ++MODULE_LICENSE("GPL"); +diff -urN linux-2.6.22-rc5/drivers/usb/gadget/at91_udc.c linux-2.6.22-rc5.new/drivers/usb/gadget/at91_udc.c +--- linux-2.6.22-rc5/drivers/usb/gadget/at91_udc.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/usb/gadget/at91_udc.c 2007-07-29 05:55:39.000000000 +0200 +@@ -1803,7 +1803,7 @@ + */ + if ((!udc->suspended && udc->addr) + || !wake +- || at91_suspend_entering_slow_clock()) { ++ || clk_must_disable(udc->fclk)) { + pullup(udc, 0); + wake = 0; + } else +diff -urN linux-2.6.22-rc5/drivers/usb/host/ohci-at91.c linux-2.6.22-rc5.new/drivers/usb/host/ohci-at91.c +--- linux-2.6.22-rc5/drivers/usb/host/ohci-at91.c 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/usb/host/ohci-at91.c 2007-07-29 05:55:39.000000000 +0200 +@@ -299,7 +299,7 @@ + * + * REVISIT: some boards will be able to turn VBUS off... + */ +- if (at91_suspend_entering_slow_clock()) { ++ if (clk_must_disable(fclk)) { + ohci_usb_reset (ohci); + at91_stop_clock(); + } +diff -urN linux-2.6.22-rc5/drivers/video/backlight/kb920x_bl.c linux-2.6.22-rc5.new/drivers/video/backlight/kb920x_bl.c +--- linux-2.6.22-rc5/drivers/video/backlight/kb920x_bl.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/drivers/video/backlight/kb920x_bl.c 2007-07-29 05:55:39.000000000 +0200 +@@ -0,0 +1,164 @@ ++/* ++ * Backlight Driver for KB9202 ++ * ++ * Copyright (c) 2006 KwikByte ++ * ++ * Based on Sharp's Corgi Backlight Driver ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/spinlock.h> ++#include <linux/fb.h> ++#include <linux/backlight.h> ++ ++#include <asm/arch/gpio.h> ++ ++/* The backlight is on(1)/off(0) */ ++#define KB9202_DEFAULT_INTENSITY 1 ++#define KB9202_MAX_INTENSITY 1 ++ ++static int kb9202bl_suspended; ++static int current_intensity = 0; ++static DEFINE_SPINLOCK(bl_lock); ++ ++static int kb9202bl_set_intensity(struct backlight_device *bd) ++{ ++ unsigned long flags; ++ int intensity = bd->props.brightness; ++ ++ if (bd->props.power != FB_BLANK_UNBLANK) ++ intensity = 0; ++ if (bd->props.fb_blank != FB_BLANK_UNBLANK) ++ intensity = 0; ++ if (kb9202bl_suspended) ++ intensity = 0; ++ ++ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK)) ++ intensity = 1; ++ ++ spin_lock_irqsave(&bl_lock, flags); ++ if (intensity) ++ gpio_set_value(AT91_PIN_PC23, 1); ++ else ++ gpio_set_value(AT91_PIN_PC23, 0); ++ spin_unlock_irqrestore(&bl_lock, flags); ++ ++ current_intensity = intensity; ++ ++ return 0; ++} ++ ++static int kb9202bl_get_intensity(struct backlight_device *bd) ++{ ++ return current_intensity; ++} ++ ++static struct backlight_ops kb9202bl_ops = { ++ .get_brightness = kb9202bl_get_intensity, ++ .update_status = kb9202bl_set_intensity, ++}; ++ ++static int __init kb9202bl_probe(struct platform_device *pdev) ++{ ++ struct backlight_device *bd; ++ ++ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops); ++ if (IS_ERR(bd)) ++ return PTR_ERR(bd); ++ ++ platform_set_drvdata(pdev, bd); ++ ++ bd->props.max_brightness = KB9202_MAX_INTENSITY; ++ bd->props.brightness = KB9202_DEFAULT_INTENSITY; ++ (void) kb9202bl_set_intensity(bd); ++ ++ return 0; ++} ++ ++static int kb9202bl_remove(struct platform_device *pdev) ++{ ++ struct backlight_device *bd = platform_get_drvdata(pdev); ++ ++ bd->props.brightness = 0; ++ bd->props.power = 0; ++ (void) kb9202bl_set_intensity(bd); ++ ++ backlight_device_unregister(bd); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int kb9202bl_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct backlight_device *bd = platform_get_drvdata(pdev); ++ ++ kb9202bl_suspended = 1; ++ (void) kb9202bl_set_intensity(bd); ++ return 0; ++} ++ ++static int kb9202bl_resume(struct platform_device *dev) ++{ ++ struct backlight_device *bd = platform_get_drvdata(pdev); ++ ++ kb9202bl_suspended = 0; ++ (void) kb9202bl_set_intensity(bd); ++ return 0; ++} ++#else ++#define kb9202bl_suspend NULL ++#define kb9202bl_resume NULL ++#endif ++ ++static struct platform_driver kb9202bl_driver = { ++ .probe = kb9202bl_probe, ++ .remove = kb9202bl_remove, ++ .suspend = kb9202bl_suspend, ++ .resume = kb9202bl_resume, ++ .driver = { ++ .name = "kb9202-bl", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_device *kb9202bl_device; ++ ++static int __init kb9202bl_init(void) ++{ ++ int ret; ++ ++ ret = platform_driver_register(&kb9202bl_driver); ++ if (!ret) { ++ kb9202bl_device = platform_device_alloc("kb9202-bl", -1); ++ if (!kb9202bl_device) ++ return -ENOMEM; ++ ++ ret = platform_device_add(kb9202bl_device); ++ if (ret) { ++ platform_device_put(kb9202bl_device); ++ platform_driver_unregister(&kb9202bl_driver); ++ } ++ } ++ return ret; ++} ++ ++static void __exit kb9202bl_exit(void) ++{ ++ platform_device_unregister(kb9202bl_device); ++ platform_driver_unregister(&kb9202bl_driver); ++} ++ ++module_init(kb9202bl_init); ++module_exit(kb9202bl_exit); ++ ++MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>"); ++MODULE_DESCRIPTION("KB9202 Backlight Driver"); ++MODULE_LICENSE("GPL"); +diff -urN linux-2.6.22-rc5/drivers/video/backlight/Kconfig linux-2.6.22-rc5.new/drivers/video/backlight/Kconfig +--- linux-2.6.22-rc5/drivers/video/backlight/Kconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/video/backlight/Kconfig 2007-07-29 05:55:39.000000000 +0200 +@@ -71,3 +71,11 @@ + help + If you have a Intel LE80578 (Carillo Ranch) say Y to enable the + backlight driver. ++ ++config BACKLIGHT_KB920x ++ tristate "KwikByte KB9202 Backlight Driver" ++ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200 ++ default y ++ help ++ If you have a KwikByte KB9202 board, say Y to enable the ++ backlight driver. +diff -urN linux-2.6.22-rc5/drivers/video/backlight/Makefile linux-2.6.22-rc5.new/drivers/video/backlight/Makefile +--- linux-2.6.22-rc5/drivers/video/backlight/Makefile 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/video/backlight/Makefile 2007-07-29 05:55:39.000000000 +0200 +@@ -7,3 +7,4 @@ + obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o + obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o + obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o ++obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o +diff -urN linux-2.6.22-rc5/drivers/video/Kconfig linux-2.6.22-rc5.new/drivers/video/Kconfig +--- linux-2.6.22-rc5/drivers/video/Kconfig 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/video/Kconfig 2007-07-29 05:55:39.000000000 +0200 +@@ -822,6 +822,17 @@ + framebuffer. Product specs at + <http://www.erd.epson.com/vdc/html/products.htm>. + ++config FB_S1D15605 ++ tristate "Epson S1D15605 framebuffer support" ++ depends on FB ++ default m if MACH_KB9200 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Build in support for the S1D15605 Epson Research 128x64 ++ LCD controller as a framebuffer. ++ + config FB_S1D13XXX + tristate "Epson S1D13XXX framebuffer support" + depends on FB +@@ -835,7 +846,7 @@ + + config FB_ATMEL + tristate "AT91/AT32 LCD Controller support" +- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32) ++ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || AVR32) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +diff -urN linux-2.6.22-rc5/drivers/video/Makefile linux-2.6.22-rc5.new/drivers/video/Makefile +--- linux-2.6.22-rc5/drivers/video/Makefile 2007-06-17 04:09:12.000000000 +0200 ++++ linux-2.6.22-rc5.new/drivers/video/Makefile 2007-07-29 05:55:39.000000000 +0200 +@@ -87,7 +87,8 @@ + obj-$(CONFIG_FB_SA1100) += sa1100fb.o + obj-$(CONFIG_FB_HIT) += hitfb.o + obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o +-obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o ++obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o ++obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o + obj-$(CONFIG_FB_PVR2) += pvr2fb.o + obj-$(CONFIG_FB_VOODOO1) += sstfb.o + obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +diff -urN linux-2.6.22-rc5/drivers/video/s1d15605fb.c linux-2.6.22-rc5.new/drivers/video/s1d15605fb.c +--- linux-2.6.22-rc5/drivers/video/s1d15605fb.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22-rc5.new/drivers/video/s1d15605fb.c 2007-07-29 05:55:39.000000000 +0200 +@@ -0,0 +1,659 @@ ++/* ++ * drivers/video/s1d15605.c ++ * ++ * Adapted from several sources including: ++ * 1) Driver for AT91 LCD Controller ++ * Copyright (C) 2006 Atmel ++ * ++ * 2) Copyright (C) 2005 S. Kevin Hester ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD ++ * display. This display uses a clone of the common Epson SED 1531 display ++ * controller. ++ * ++ * I've heavily borrowed code from the vfb.c driver. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifdef DEBUG ++#define MSG(string, args...) printk("s1d15605fb:" string, ##args) ++#else ++#define MSG(string, args...) ++#endif ++ ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/dma-mapping.h> ++#include <linux/interrupt.h> ++#include <linux/clk.h> ++#include <linux/fb.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++ ++#include <asm/uaccess.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++#ifdef CONFIG_PMAC_BACKLIGHT ++#include <asm/backlight.h> ++#endif ++ ++#define VIDEOWIDTH 128 ++#define VIDEOHEIGHT 64 ++#define VIDEODEPTH 1 /* bits/pixel */ ++#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8) ++ ++/* The number of bytes that actually go to the device */ ++#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT) ++#define VIDEOMEMSIZE PAGE_SIZE ++ ++static struct fb_var_screeninfo s1d15605_default __initdata = { ++ .xres = VIDEOWIDTH, ++ .yres = VIDEOHEIGHT, ++ .xres_virtual = VIDEOWIDTH, ++ .yres_virtual = VIDEOHEIGHT, ++ .bits_per_pixel = VIDEODEPTH, ++ .red = { 0, 1, 0 }, ++ .green = { 0, 1, 0 }, ++ .blue = { 0, 1, 0 }, ++ .activate = FB_ACTIVATE_NOW, ++ .pixclock = 20000, ++ .vmode = FB_VMODE_NONINTERLACED, ++}; ++ ++static struct fb_fix_screeninfo s1d15605_fix __initdata = { ++ .id = "s1d15605", ++ .type = FB_TYPE_PACKED_PIXELS, ++ .visual = FB_VISUAL_MONO10, ++ .xpanstep = 0, ++ .ypanstep = 0, ++ .ywrapstep = 0, ++ .accel = FB_ACCEL_NONE, ++}; ++ ++struct s1d15605fb_info { ++ struct fb_info *info; ++ char *mmio; ++ unsigned long reset_pin; ++ struct platform_device *pdev; ++}; ++ ++/* ++ * LCD device interface ++ */ ++#define RESET_DISPLAY 0xE2 ++#define LCD_BIAS_1_9 0xA2 ++#define ADC_SELECT_REVERSE 0xA1 ++#define COMMON_OUTPUT_NORMAL 0xC0 ++#define V5_RESISTOR_RATIO 0x26 ++#define ELECTRONIC_VOLUME_SET 0x81 ++#define ELECTRONIC_VOLUME_INIT 0x20 ++#define POWER_CONTROL_SET 0x28 ++#define VOLTAGE_REGULATOR 0x02 ++#define VOLTAGE_FOLLOWER 0x01 ++#define BOOSTER_CIRCUIT 0x04 ++#define DISPLAY_ON 0xAF ++#define START_LINE_SET 0x40 ++#define PAGE_ADDRESS_SET 0xB0 ++#define COLUMN_ADDRESS_HIGH 0x10 ++#define COLUMN_ADDRESS_LOW 0x00 ++#define RESISTOR_RATIO_START 0x20 ++ ++#define NUM_OF_PAGES 8 ++#define NUM_OF_COLUMNS 128 ++ ++#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio) ++#define READ_COMMAND __raw_readb((sinfo)->mmio) ++#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000)) ++#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000)) ++ ++ ++/* ++ * s1d15605fb_resize_framebuffer ++ * ++ * Free allocated space if different. Allocate on new of changed. ++ * Returns -ENOMEM if the new framebuffer can not be allocated, ++ * zero on success. ++ */ ++static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo) ++{ ++ struct fb_info *info = sinfo->info; ++ struct fb_fix_screeninfo *fix = &info->fix; ++ struct fb_var_screeninfo *var = &info->var; ++ unsigned int new_size; ++ void *new_vaddr; ++ ++ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8); ++ ++ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__, ++ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size); ++ ++ if (new_size == fix->smem_len) ++ return 0; ++ ++ if (fix->smem_len) { ++ kfree(info->screen_base); ++ } ++ ++ new_vaddr = kmalloc(new_size, GFP_KERNEL); ++ ++ if (!new_vaddr) { ++ fix->smem_len = 0; ++ return -ENOMEM; ++ } ++ ++ info->screen_base = new_vaddr; ++ fix->smem_start = (unsigned)new_vaddr; ++ fix->smem_len = new_size; ++ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8; ++ ++ dev_info(info->device, ++ "%luKiB frame buffer at %08lx (mapped at %p)\n", ++ (unsigned long)info->fix.smem_len / 1024, ++ (unsigned long)info->fix.smem_start, ++ info->screen_base); ++ ++ return 0; ++} ++ ++ ++/* ++ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to ++ * bottom) each page seems to be eight pixels high, where these eight pixels are ++ * one byte ++ */ ++static void s1d15605_update(struct fb_info *info) ++{ ++ struct s1d15605fb_info *sinfo = info->par; ++ int page, i, row, colmask; ++ u8 retVal, *rowPtr; ++ ++ WRITE_COMMAND(START_LINE_SET); ++ for (page = 0; page < NUM_OF_PAGES; ++page) { ++ WRITE_COMMAND(PAGE_ADDRESS_SET + page); ++ WRITE_COMMAND(COLUMN_ADDRESS_HIGH); ++ WRITE_COMMAND(COLUMN_ADDRESS_LOW); ++ ++ for (i = 0; i < NUM_OF_COLUMNS; ++i) ++ { ++ /* point of opportunity: optimization */ ++ colmask = (1 << (i & 0x7)); ++ rowPtr = (u8*)(info->screen_base); ++ rowPtr += (VIDEOWIDTH_BYTES * 8 * page); ++ rowPtr += (i >> 3); ++ retVal = 0; ++ for (row = 0; row < 8; ++row) ++ { ++ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0); ++ rowPtr += VIDEOWIDTH_BYTES; ++ } ++ WRITE_DATA(retVal); ++ } ++ } ++ ++ WRITE_COMMAND(DISPLAY_ON); ++} ++ ++ ++/* ++ * Setting the video mode has been split into two parts. ++ * First part, xxxfb_check_var, must not write anything ++ * to hardware, it should only verify and adjust var. ++ * This means it doesn't alter par but it does use hardware ++ * data from it to check this var. ++ */ ++static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ /* ++ * Some very basic checks ++ */ ++ if (!var->xres) ++ var->xres = 1; ++ if (!var->yres) ++ var->yres = 1; ++ if (var->xres > var->xres_virtual) ++ var->xres_virtual = var->xres; ++ if (var->yres > var->yres_virtual) ++ var->yres_virtual = var->yres; ++ ++ if(var->bits_per_pixel > VIDEODEPTH) ++ return -EINVAL; ++ ++ /* ++ * Memory limit ++ */ ++ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) > ++ ACTUALVIDEOMEMSIZE) ++ return -ENOMEM; ++ ++ /* ++ * Now that we checked it we alter var. The reason being is that the video ++ * mode passed in might not work but slight changes to it might make it ++ * work. This way we let the user know what is acceptable. ++ */ ++ switch (var->bits_per_pixel) { ++ case 1: ++ var->red.offset = var->green.offset = var->blue.offset = 0; ++ var->red.length = var->green.length = var->blue.length ++ = var->bits_per_pixel; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ var->xoffset = var->yoffset = 0; ++ var->red.msb_right = var->green.msb_right = var->blue.msb_right = ++ var->transp.msb_right = 0; ++ ++ return 0; ++} ++ ++ ++/* ++ * This routine actually sets the video mode. It's in here where we ++ * the hardware state info->par and fix which can be affected by the ++ * change in par. For this driver it doesn't do much. ++ */ ++static int s1d15605_set_par(struct fb_info *info) ++{ ++ int ret; ++ ++ MSG("%s:\n", __func__); ++ MSG(" * resolution: %ux%u (%ux%u virtual)\n", ++ info->var.xres, info->var.yres, ++ info->var.xres_virtual, info->var.yres_virtual); ++ ++ ret = s1d15605fb_resize_framebuffer(info->par); ++ ++ info->fix.visual = FB_VISUAL_MONO10; ++ return ret; ++} ++ ++ ++/* ++ * Set a single color register. The values supplied are already ++ * rounded down to the hardware's capabilities (according to the ++ * entries in the var structure). Return != 0 for invalid regno. ++ */ ++static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue, ++ u_int transp, struct fb_info *info) ++{ ++ if (regno > 1) /* no. of hw registers - we only do mono now */ ++ return 1; ++ ++ return 0; ++} ++ ++ ++/* ++ * Currently, the routine will simply shut-off the backlight and prevent ++ * updates/refreshes. Modify according to application. ++ * ++ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off ++ */ ++static int s1d15605_blank(int blank, struct fb_info *info) ++{ ++#ifdef CONFIG_PMAC_BACKLIGHT ++ if (blank) ++ pmac_backlight->props.power = FB_BLANK_POWERDOWN; ++ else ++ pmac_backlight->props.power = FB_BLANK_UNBLANK; ++ backlight_update_status(pmac_backlight); ++#endif ++ return 1; ++} ++ ++ ++/* ++ * Pan or Wrap the Display ++ * ++ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag ++ */ ++/* ++static int s1d15605_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ if (var->vmode & FB_VMODE_YWRAP) { ++ if (var->yoffset < 0 ++ || var->yoffset >= info->var.yres_virtual ++ || var->xoffset) ++ return -EINVAL; ++ } else { ++ if (var->xoffset + var->xres > info->var.xres_virtual || ++ var->yoffset + var->yres > info->var.yres_virtual) ++ return -EINVAL; ++ } ++ info->var.xoffset = var->xoffset; ++ info->var.yoffset = var->yoffset; ++ if (var->vmode & FB_VMODE_YWRAP) ++ info->var.vmode |= FB_VMODE_YWRAP; ++ else ++ info->var.vmode &= ~FB_VMODE_YWRAP; ++ return 0; ++} ++*/ ++ ++ ++static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region) ++{ ++ cfb_copyarea(info, region); ++ s1d15605_update(info); ++} ++ ++ ++static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect) ++{ ++ cfb_fillrect(info, rect); ++ s1d15605_update(info); ++} ++ ++ ++static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image) ++{ ++ cfb_imageblit(p, image); ++ s1d15605_update(p); ++} ++ ++ ++/* ++ * Write the users data to our framebuffer, and then trigger a psuedo DMA ++ */ ++static ssize_t s1d15605_write(struct file *file, const char *buf, ++ size_t count, loff_t *ppos) ++{ ++ unsigned long p = *ppos; ++ struct inode *inode = file->f_dentry->d_inode; ++ int fbidx = iminor(inode); ++ struct fb_info *info = registered_fb[fbidx]; ++ int err; ++ ++ if (p > info->fix.smem_len) ++ return -ENOSPC; ++ if (count >= info->fix.smem_len) ++ count = info->fix.smem_len; ++ err = 0; ++ if (count + p > info->fix.smem_len) { ++ count = info->fix.smem_len - p; ++ err = -ENOSPC; ++ } ++ if (count) { ++ char *base_addr; ++ ++ base_addr = info->screen_base; ++ count -= copy_from_user(base_addr+p, buf, count); ++ *ppos += count; ++ err = -EFAULT; ++ } ++ ++ s1d15605_update(info); ++ ++ if (count) ++ return count; ++ ++ return err; ++} ++ ++#ifdef USE_PRIVATE_VMA_FXS ++static void s1d15605_vma_open(struct vm_area_struct *vma) ++{ ++ // FIXME - store stats in the device data via vm_private_data ++} ++ ++ ++static void s1d15605_vma_close(struct vm_area_struct *vma) ++{ ++ // FIXME - store stats in the device data via vm_private_data ++} ++ ++ ++static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma, ++ unsigned long address, int *type) ++{ ++ struct page *page; ++ struct fb_info *info = vma->vm_private_data; ++ ++ page = virt_to_page(info->screen_base); ++ get_page(page); ++ ++ // FIXME - now someone has a link to our page, start periodically blitting ++ // latest updates to the actual device. ++ ++ return page; ++} ++ ++ ++static struct vm_operations_struct s1d15605_vm_ops = { ++ .open = s1d15605_vma_open, ++ .close = s1d15605_vma_close, ++ .nopage = s1d15605_vma_nopage ++}; ++ ++ ++/* We don't do much here - because we have special vm_ops */ ++static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma) ++{ ++ vma->vm_ops = &s1d15605_vm_ops; ++ vma->vm_flags |= VM_RESERVED; ++ vma->vm_private_data = info; ++ s1d15605_vma_open(vma); ++ ++ return 0; ++} ++#endif /* USE_PRIVATE_VMA_FXS */ ++ ++ ++static struct fb_ops s1d15605fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = s1d15605_check_var, ++ .fb_set_par = s1d15605_set_par, ++ .fb_setcolreg = s1d15605_setcolreg, ++ .fb_blank = s1d15605_blank, ++// .fb_pan_display = s1d15605_pan_display, ++ .fb_fillrect = s1d15605_fillrect, ++ .fb_copyarea = s1d15605_copyarea, ++ .fb_imageblit = s1d15605_imageblit, ++ .fb_write = s1d15605_write, ++#ifdef USE_PRIVATE_VMA_FXS ++ .fb_mmap = s1d15605_mmap, ++#endif ++}; ++ ++ ++static void s1d15605_device_init(struct s1d15605fb_info *sinfo) { ++ ++ char value; ++ ++ /* release the reset line by reading the device - proto hardware */ ++ value = READ_COMMAND; ++ value = READ_COMMAND; ++ ++#ifdef CONFIG_MACH_KB9200 ++ /* new boards have dedicated reset line */ ++ gpio_set_value(sinfo->reset_pin, 1); ++#endif ++ ++ /* initialize the device within 5ms */ ++ WRITE_COMMAND(RESET_DISPLAY); ++ WRITE_COMMAND(LCD_BIAS_1_9); ++ WRITE_COMMAND(ADC_SELECT_REVERSE); ++ WRITE_COMMAND(COMMON_OUTPUT_NORMAL); ++ WRITE_COMMAND(V5_RESISTOR_RATIO); ++ WRITE_COMMAND(ELECTRONIC_VOLUME_SET); ++ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT); ++ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT); ++ WRITE_COMMAND(DISPLAY_ON); ++ ++ WRITE_COMMAND(RESISTOR_RATIO_START + 4); ++ WRITE_COMMAND(ELECTRONIC_VOLUME_SET); ++ WRITE_COMMAND(0x33); ++} ++ ++ ++static int s1d15605fb_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fb_info *info; ++ struct s1d15605fb_info *sinfo; ++ int ret; ++ ++ MSG("%s\n", __func__); ++ ++ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) { ++ dev_err(dev, "Cannot allocate framebuffer struct\n"); ++ return -ENOMEM; ++ } ++ ++ sinfo = info->par; ++ sinfo->info = info; ++ sinfo->pdev = pdev; ++ ++ if (pdev->num_resources < 2) { ++ dev_err(dev, "Resources unusable\n"); ++ ret = -ENODEV; ++ goto free_info; ++ } ++ ++ info->fbops = &s1d15605fb_ops; ++ strcpy(info->fix.id, pdev->name); ++ ++ info->fix.mmio_start = pdev->resource[0].start; ++ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1; ++ sinfo->reset_pin = pdev->resource[1].start; ++ ++ ret = s1d15605fb_resize_framebuffer(sinfo); ++ if (ret < 0) { ++ dev_err(dev, "Cannot resize framebuffer: %d\n", ret); ++ goto free_fb; ++ } ++ ++ if (!request_mem_region(info->fix.mmio_start, ++ info->fix.mmio_len, pdev->name)) { ++ ret = -EBUSY; ++ goto free_fb; ++ } ++ ++ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len); ++ if (!sinfo->mmio) { ++ dev_err(dev, "Cannot map LCD memory region\n"); ++ goto release_mem; ++ } ++ ++ s1d15605_device_init(sinfo); ++ ++ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1); ++ ++ if (!ret || (ret == 4)) ++ info->var = s1d15605_default; ++ ++ info->fix = s1d15605_fix; ++ info->flags = FBINFO_FLAG_DEFAULT | ++/* FBINFO_HWACCEL_YPAN | */ ++ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; ++ ++ ret = register_framebuffer(info); ++ if (ret < 0) { ++ dev_err(dev, "Failed to register framebuffer device: %d\n", ret); ++ goto unmap_mmio; ++ } ++ ++ dev_set_drvdata(dev, info); ++ ++ memset(info->screen_base, 0, info->fix.smem_len); ++ info->var.activate |= FB_ACTIVATE_NOW; ++ ret = fb_set_var(info, &info->var); ++ if (ret) { ++ dev_warn(dev, "Unable to set display parameters\n"); ++ } ++ ++ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW); ++ ++ dev_dbg(dev, "%s SUCCESS\n", __func__); ++ ++ dev_info(dev, "Driver $Revision: 1.1 $\n"); ++ ++ return 0; ++ ++unmap_mmio: ++ iounmap(sinfo->mmio); ++release_mem: ++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); ++free_fb: ++ kfree(info->screen_base); ++ ++free_info: ++ framebuffer_release(info); ++ ++ dev_dbg(dev, "%s FAILED\n", __func__); ++ return ret; ++} ++ ++ ++static int s1d15605fb_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fb_info *info = dev_get_drvdata(dev); ++ struct s1d15605fb_info *sinfo = info->par; ++ ++ if (!sinfo) ++ return 0; ++ ++ unregister_framebuffer(info); ++ ++ iounmap(sinfo->mmio); ++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); ++ ++ kfree(info->screen_base); ++ ++ dev_set_drvdata(dev, NULL); ++ framebuffer_release(info); ++ return 0; ++} ++ ++ ++static struct platform_driver s1d15605fb_driver = { ++ .probe = s1d15605fb_probe, ++ .remove = s1d15605fb_remove, ++ .driver = { ++ .name = "s1d15605fb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++ ++static int __init s1d15605fb_init(void) ++{ ++ return platform_driver_register(&s1d15605fb_driver); ++} ++ ++ ++static void __exit s1d15605fb_exit(void) ++{ ++ platform_driver_unregister(&s1d15605fb_driver); ++} ++ ++ ++module_init(s1d15605fb_init); ++module_exit(s1d15605fb_exit); ++ ++ ++MODULE_AUTHOR("KwikByte"); ++MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/at91/patches-2.6.22/001-vlink-machine.patch b/target/linux/at91/patches-2.6.22/001-vlink-machine.patch new file mode 100644 index 0000000..d52c452 --- /dev/null +++ b/target/linux/at91/patches-2.6.22/001-vlink-machine.patch @@ -0,0 +1,246 @@ +diff -urN linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S +--- linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 06:33:09.000000000 +0200 ++++ linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 06:39:45.000000000 +0200 +@@ -67,6 +67,12 @@ + cmp r7, r3 + beq 99f + ++ @ FDL Versalink : 1053 ++ mov r3, #(MACH_TYPE_VLINK & 0xff) ++ orr r3, r3, #(MACH_TYPE_VLINK & 0xff00) ++ cmp r7, r3 ++ beq 99f ++ + @ Ajeco 1ARM : 1075 + mov r3, #(MACH_TYPE_ONEARM & 0xff) + orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) +diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c linux-2.6.22.1/arch/arm/mach-at91/board-vlink.c +--- linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22.1/arch/arm/mach-at91/board-vlink.c 2007-07-29 06:40:47.000000000 +0200 +@@ -0,0 +1,191 @@ ++/* ++ * linux/arch/arm/mach-at91/board-vlink.c ++ * ++ * Copyright (C) 2005 SAN People ++ * Copyright (C) 2006,2007 Guthrie Consulting ++ * ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/mtd/physmap.h> ++ ++#include <asm/hardware.h> ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91rm9200_mc.h> ++ ++#include "generic.h" ++ ++ ++/* ++ * Serial port configuration. ++ * 0 .. 3 = USART0 .. USART3 ++ * 4 = DBGU ++ */ ++static struct at91_uart_config __initdata vlink_uart_config = { ++ .console_tty = 0, /* ttyS0 */ ++ .nr_tty = 5, ++ .tty_map = { 4, 1, 0, 3, 2 } /* ttyS0, ..., ttyS4 */ ++}; ++ ++static void __init vlink_map_io(void) ++{ ++ /* Initialize processor: 18.432 MHz crystal */ ++ at91rm9200_initialize(18432000, AT91RM9200_PQFP); ++ ++ /* Setup the LEDs */ ++ at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15); ++ ++ /* Setup the serial ports and console */ ++ at91_init_serial(&vlink_uart_config); ++} ++ ++static void __init vlink_init_irq(void) ++{ ++ at91rm9200_init_interrupts(NULL); ++} ++ ++static struct at91_eth_data __initdata vlink_eth_data = { ++ .phy_irq_pin = AT91_PIN_PC4, ++ .is_rmii = 1, ++}; ++ ++static struct at91_usbh_data __initdata vlink_usbh_data = { ++ .ports = 1, ++}; ++ ++/* ++static struct at91_udc_data __initdata vlink_udc_data = { ++ .vbus_pin = AT91_PIN_PD4, ++ .pullup_pin = AT91_PIN_PD5, ++}; ++*/ ++ ++static struct at91_mmc_data __initdata vlink_mmc_data = { ++// .det_pin = AT91_PIN_PB27, ++ .slot_b = 0, ++ .wire4 = 1, ++// .wp_pin = AT91_PIN_PA17, ++}; ++ ++static struct spi_board_info vlink_spi_devices[] = { ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ }, ++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD ++ { /* DataFlash card */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 3, ++ .max_speed_hz = 15 * 1000 * 1000, ++ }, ++#endif ++}; ++ ++/*static struct at91_gpio_led vlink_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PC14, ++ .trigger = "heartbeat", ++ }, ++ { ++ .name = "led1", ++ .gpio = AT91_PIN_PC15, ++ .trigger = "timer", ++ } ++}; ++*/ ++ ++static void __init vlink_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* Ethernet */ ++ at91_add_device_eth(&vlink_eth_data); ++ /* USB Host */ ++ at91_add_device_usbh(&vlink_usbh_data); ++ /* USB Device */ ++// at91_add_device_udc(&vlink_udc_data); ++// at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ ++ /* I2C */ ++ at91_add_device_i2c(); ++ /* SPI */ ++ at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices)); ++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD ++ /* DataFlash card */ ++// at91_set_gpio_output(AT91_PIN_PB22, 0); ++#else ++ /* MMC */ ++// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ ++ at91_add_device_mmc(0, &vlink_mmc_data); ++#endif ++ /* LEDs */ ++// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds)); ++ ++/* Other LED's */ ++ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1 ++ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1 ++ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1 ++ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1 ++ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2 ++ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2 ++ ++/* SIM Cards */ ++ at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3 ++ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2 ++ at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1 ++ ++/* GSM Module Control */ ++ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF ++ ++/* Test jig presence detection */ ++ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT ++ ++/* Power indicator */ ++ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND ++ ++/* USB Device control */ ++ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX ++ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP ++ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive ++ ++} ++ ++MACHINE_START(VLINK, "FDL VersaLink") ++ /* Maintainer: Guthrie Consulting */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91rm9200_timer, ++ .map_io = vlink_map_io, ++ .init_irq = vlink_init_irq, ++ .init_machine = vlink_board_init, ++MACHINE_END +diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig linux-2.6.22.1/arch/arm/mach-at91/Kconfig +--- linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig 2007-07-29 06:33:09.000000000 +0200 ++++ linux-2.6.22.1/arch/arm/mach-at91/Kconfig 2007-07-29 06:42:19.000000000 +0200 +@@ -103,6 +103,12 @@ + help + Select this if you are using Promwad's Chub board. + ++config MACH_VLINK ++ bool "Figment Design Labs VersaLink" ++ depends on ARCH_AT91RM9200 ++ help ++ Select this if you are using FDL's VersaLink board ++ + endif + + # ---------------------------------------------------------- +diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm/mach-at91/Makefile +--- linux-2.6.22.1.old/arch/arm/mach-at91/Makefile 2007-07-29 06:33:09.000000000 +0200 ++++ linux-2.6.22.1/arch/arm/mach-at91/Makefile 2007-07-29 06:43:36.000000000 +0200 +@@ -29,6 +29,7 @@ + obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o + obj-$(CONFIG_MACH_KAFA) += board-kafa.o + obj-$(CONFIG_MACH_CHUB) += board-chub.o ++obj-$(CONFIG_MACH_VLINK) += board-vlink.o + obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o + + # AT91SAM9260 board-specific support +@@ -52,6 +53,7 @@ + led-$(CONFIG_MACH_CSB637) += leds.o + led-$(CONFIG_MACH_KB9200) += leds.o + led-$(CONFIG_MACH_KAFA) += leds.o ++led-$(CONFIG_MACH_VLINK) += leds.o + obj-$(CONFIG_LEDS) += $(led-y) + + # VGA support diff --git a/target/linux/at91/patches-2.6.22/002-led-driver.patch b/target/linux/at91/patches-2.6.22/002-led-driver.patch new file mode 100644 index 0000000..29956f4 --- /dev/null +++ b/target/linux/at91/patches-2.6.22/002-led-driver.patch @@ -0,0 +1,121 @@ +diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm/mach-at91/Makefile +--- linux-2.6.22.1.old/arch/arm/mach-at91/Makefile 2007-07-29 06:46:13.000000000 +0200 ++++ linux-2.6.22.1/arch/arm/mach-at91/Makefile 2007-07-29 06:54:19.000000000 +0200 +@@ -53,7 +53,7 @@ + led-$(CONFIG_MACH_CSB637) += leds.o + led-$(CONFIG_MACH_KB9200) += leds.o + led-$(CONFIG_MACH_KAFA) += leds.o +-led-$(CONFIG_MACH_VLINK) += leds.o ++led-$(CONFIG_MACH_VLINK) += vlink_leds.o + obj-$(CONFIG_LEDS) += $(led-y) + + # VGA support +diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/vlink_leds.c linux-2.6.22.1/arch/arm/mach-at91/vlink_leds.c +--- linux-2.6.22.1.old/arch/arm/mach-at91/vlink_leds.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22.1/arch/arm/mach-at91/vlink_leds.c 2007-07-29 06:54:58.000000000 +0200 +@@ -0,0 +1,105 @@ ++/* ++ * LED driver for Atmel AT91-based boards. ++ * ++ * Copyright (C) SAN People (Pty) Ltd ++ * Modified for FDL VersaLink Copyright (C) Guthrie Consulting ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++*/ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++ ++#include <asm/mach-types.h> ++#include <asm/leds.h> ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++ ++static inline void at91_led_on(unsigned int led) ++{ ++ at91_set_gpio_value(led, 0); ++} ++ ++static inline void at91_led_off(unsigned int led) ++{ ++ at91_set_gpio_value(led, 1); ++} ++ ++static inline void at91_led_toggle(unsigned int led) ++{ ++ unsigned long is_off = at91_get_gpio_value(led); ++ if (is_off) { ++ at91_led_on(led); ++ at91_led_off(at91_leds_cpu); ++ } ++ else { ++ at91_led_on(at91_leds_cpu); ++ at91_led_off(led); ++ } ++} ++ ++ ++/* ++ * Handle LED events. ++ */ ++ ++/* ++ * VersaLink has a single bi-coloured LED which changes colour when the ++ * polarity is reversed ++ */ ++static void at91_leds_event(led_event_t evt) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ switch(evt) { ++ case led_start: /* System startup */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++ ++ case led_stop: /* System stop / suspend */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++ ++#ifdef CONFIG_LEDS_TIMER ++ case led_timer: /* Every 50 timer ticks */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++#endif ++ ++#ifdef CONFIG_LEDS_CPU ++ case led_idle_start: /* Entering idle state */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++ ++ case led_idle_end: /* Exit idle state */ ++ at91_led_toggle(at91_leds_timer); ++ break; ++#endif ++ ++ default: ++ break; ++ } ++ ++ local_irq_restore(flags); ++} ++ ++ ++static int __init leds_init(void) ++{ ++ if (!at91_leds_timer || !at91_leds_cpu) ++ return -ENODEV; ++ ++ leds_event = at91_leds_event; ++ ++ leds_event(led_start); ++ return 0; ++} ++ ++__initcall(leds_init); diff --git a/target/linux/at91/patches-2.6.22/003-gpio-driver.patch b/target/linux/at91/patches-2.6.22/003-gpio-driver.patch new file mode 100644 index 0000000..766f962 --- /dev/null +++ b/target/linux/at91/patches-2.6.22/003-gpio-driver.patch @@ -0,0 +1,359 @@ +diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c linux-2.6.22.1/arch/arm/mach-at91/gpio.c +--- linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c 2007-07-10 20:56:30.000000000 +0200 ++++ linux-2.6.22.1/arch/arm/mach-at91/gpio.c 2007-07-29 07:03:30.000000000 +0200 +@@ -27,6 +27,7 @@ + + static struct at91_gpio_bank *gpio; + static int gpio_banks; ++static u32 pio_gpio_pin[4] = { 0, 0, 0, 0 }; + + + static inline void __iomem *pin_to_controller(unsigned pin) +@@ -71,9 +72,13 @@ + { + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); ++ int bank = (pin - PIN_BASE) / 32; + + if (!pio) + return -EINVAL; ++ ++ pio_gpio_pin[bank] |= mask; ++ + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_PER); +@@ -130,10 +135,13 @@ + { + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); ++ int bank = (pin - PIN_BASE) / 32; + + if (!pio) + return -EINVAL; + ++ pio_gpio_pin[bank] |= mask; ++ + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ODR); +@@ -151,10 +159,13 @@ + { + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); ++ int bank = (pin - PIN_BASE) / 32; + + if (!pio) + return -EINVAL; + ++ pio_gpio_pin[bank] |= mask; ++ + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); +@@ -262,6 +273,18 @@ + } + EXPORT_SYMBOL(at91_get_gpio_value); + ++int at91_is_pin_gpio(unsigned pin) ++{ ++ void __iomem *pio = pin_to_controller(pin); ++ unsigned mask = pin_to_mask(pin); ++ int bank = (pin - PIN_BASE) / 32; ++ ++ if (!pio) ++ return -EINVAL; ++ return (pio_gpio_pin[bank] & mask) != 0; ++} ++EXPORT_SYMBOL(at91_is_pin_gpio); ++ + /*--------------------------------------------------------------------------*/ + + #ifdef CONFIG_PM +diff -urN linux-2.6.22.1.old/drivers/char/Kconfig linux-2.6.22.1/drivers/char/Kconfig +--- linux-2.6.22.1.old/drivers/char/Kconfig 2007-07-29 06:46:13.000000000 +0200 ++++ linux-2.6.22.1/drivers/char/Kconfig 2007-07-29 07:05:30.000000000 +0200 +@@ -1099,5 +1099,12 @@ + The SPI driver gives user mode access to this serial + bus on the AT91RM9200 processor. + ++config AT91_VLIO ++ tristate "Versalink LED and GPIO interface" ++ depends on ARCH_AT91RM9200 && MACH_VLINK ++ default n ++ help ++ Provides a handler GPIO's in userspace ++ + endmenu + +diff -urN linux-2.6.22.1.old/drivers/char/Makefile linux-2.6.22.1/drivers/char/Makefile +--- linux-2.6.22.1.old/drivers/char/Makefile 2007-07-29 06:46:13.000000000 +0200 ++++ linux-2.6.22.1/drivers/char/Makefile 2007-07-29 07:06:06.000000000 +0200 +@@ -95,6 +95,7 @@ + obj-$(CONFIG_TELCLOCK) += tlclk.o + obj-$(CONFIG_AT91_SPI) += at91_spi.o + obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o ++obj-$(CONFIG_AT91_VLIO) += vlink_giu.o + + obj-$(CONFIG_WATCHDOG) += watchdog/ + obj-$(CONFIG_MWAVE) += mwave/ +diff -urN linux-2.6.22.1.old/drivers/char/vlink_giu.c linux-2.6.22.1/drivers/char/vlink_giu.c +--- linux-2.6.22.1.old/drivers/char/vlink_giu.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.22.1/drivers/char/vlink_giu.c 2007-07-29 07:06:33.000000000 +0200 +@@ -0,0 +1,256 @@ ++/* ++ * Driver for FDL Versalink GPIO ++ * ++ * Copyright (C) 2005 Guthrie Consulting ++ * Author: Hamish Guthrie <hamish@prodigi.ch> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++ ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/fs.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/types.h> ++#include <linux/proc_fs.h> ++#include <linux/fcntl.h> ++#include <linux/seq_file.h> ++#include <linux/cdev.h> ++#include <asm/arch/gpio.h> ++#include <asm/uaccess.h> ++ ++static int major; /* default is dynamic major device number */ ++module_param(major, int, 0); ++MODULE_PARM_DESC(major, "Major device number"); ++ ++#define VIO_NR_DEVS 96 ++ ++struct vio_dev { ++ struct cdev cdev; ++}; ++ ++struct vio_dev *vio_devices; ++static struct class *vio_class; ++ ++static ssize_t gpio_read(struct file *file, char __user *buf, size_t len, ++ loff_t *ppos) ++{ ++ unsigned int pin; ++ int retval; ++ char value = '0'; ++ ++ pin = iminor(file->f_dentry->d_inode); ++ ++ retval = at91_get_gpio_value(PIN_BASE + pin); ++ if (retval < 0) ++ return -EFAULT; ++ ++ value = retval + 0x30; ++ if (put_user(value, buf)) ++ return -EFAULT; ++ ++ return 1; ++} ++ ++static ssize_t gpio_write(struct file *file, const char __user *data, ++ size_t len, loff_t *ppos) ++{ ++ unsigned int pin; ++ size_t i; ++ char c; ++ int retval = 0; ++ ++ pin = iminor(file->f_dentry->d_inode); ++ ++ for (i = 0; i < len; i++) { ++ if (get_user(c, data + i)) ++ return -EFAULT; ++ ++ switch (c) { ++ case '0': ++ case '1': ++ retval = at91_set_gpio_value(PIN_BASE + pin, (int)c - 0x30); ++ if (retval < 0) ++ return -EFAULT; ++ break; ++ default: ++ break; ++ } ++ ++ if (retval < 0) ++ break; ++ } ++ ++ return i; ++} ++ ++static int gpio_open(struct inode *inode, struct file *file) ++{ ++ return nonseekable_open(inode, file); ++} ++ ++static int gpio_release(struct inode *inode, struct file *file) ++{ ++ return 0; ++} ++ ++static struct file_operations vio_fops = { ++ .owner = THIS_MODULE, ++ .read = gpio_read, ++ .write = gpio_write, ++ .open = gpio_open, ++ .release = gpio_release, ++}; ++ ++static void vio_setup_cdev(struct vio_dev *dev, int index) ++{ ++ int err, devno = MKDEV(major, index); ++ ++ cdev_init(&dev->cdev, &vio_fops); ++ dev->cdev.owner = THIS_MODULE; ++ dev->cdev.ops = &vio_fops; ++ err = cdev_add (&dev->cdev, devno, 1); ++ if (err) ++ printk(KERN_NOTICE "vio: Error %d adding vio%d", err, index); ++} ++ ++static int vio_remove(struct platform_device *dev) ++{ ++ int i; ++ dev_t devno = MKDEV(major, 0); ++ ++ if (vio_devices) { ++ for(i=0; i<VIO_NR_DEVS; i++) { ++ int iodev = at91_is_pin_gpio(PIN_BASE + i); ++ if (iodev) { ++ cdev_del(&vio_devices[i].cdev); ++ class_device_destroy(vio_class, MKDEV(major, i)); ++ } ++ } ++ kfree(vio_devices); ++ } ++ ++ class_destroy(vio_class); ++ unregister_chrdev_region(devno, VIO_NR_DEVS); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ return 0; ++} ++ ++static int vio_probe(struct platform_device *dev) ++{ ++ int retval, i, j; ++ dev_t vdev = 0; ++ ++ if (major) { ++ vdev = MKDEV(major, 0); ++ retval = register_chrdev_region(vdev, VIO_NR_DEVS, "vio"); ++ } else { ++ retval = alloc_chrdev_region(&vdev, 0, VIO_NR_DEVS, "vio"); ++ major = MAJOR(vdev); ++ } ++ if (retval < 0) { ++ printk(KERN_WARNING "vio: can't get major %d\n", major); ++ return retval; ++ } ++ ++ if (major == 0) { ++ major = retval; ++ printk(KERN_INFO "vio: major number %d\n", major); ++ } ++ ++ vio_class = class_create(THIS_MODULE, "vio"); ++ ++ if (IS_ERR(vio_class)) { ++ printk(KERN_ERR "vio: Error creating vio class\n"); ++ vio_remove(dev); ++ return PTR_ERR(vio_class); ++ } ++ ++ vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL); ++ if (!vio_devices) { ++ retval = -ENOMEM; ++ goto fail; ++ } ++ memset(vio_devices, 0, VIO_NR_DEVS * sizeof(struct vio_dev)); ++ ++ for (i=0; i<VIO_NR_DEVS/32; i++) ++ for(j=0; j<32; j++) { ++ int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j); ++ if (iodev) { ++ vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j); ++ class_device_create(vio_class, NULL, MKDEV(major, i*32 + j), NULL, ++ "vio%c%d", i + 'A', j); ++ } ++ } ++ ++ platform_set_drvdata(dev, vio_devices); ++ ++ return 0; ++ ++fail: ++ vio_remove(dev); ++ return retval; ++} ++ ++static struct platform_device *vio_platform_device; ++ ++static struct platform_driver vio_driver = { ++ .probe = vio_probe, ++ .remove = vio_remove, ++ .driver = { ++ .name = "vio", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init vio_init(void) ++{ ++ int retval; ++ ++ vio_platform_device = platform_device_register_simple("vio", -1, NULL, 0); ++ if (IS_ERR(vio_platform_device)) { ++ printk(KERN_WARNING "vio: device registration failed\n"); ++ return PTR_ERR(vio_platform_device); ++ } ++ ++ retval = platform_driver_register(&vio_driver); ++ if (retval < 0) { ++ printk(KERN_WARNING "vio: driver registration failed\n"); ++ platform_device_unregister(vio_platform_device); ++ } ++ ++ return retval; ++} ++ ++static void __exit vio_exit(void) ++{ ++ platform_driver_unregister(&vio_driver); ++ platform_device_unregister(vio_platform_device); ++} ++ ++module_init(vio_init); ++module_exit(vio_exit); ++ ++MODULE_AUTHOR("Hamish Guthrie <hamish@prodigi.ch>"); ++MODULE_DESCRIPTION("FDL Versalink GPIO Driver"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/at91/patches-2.6.22/007-mtd-partition.patch b/target/linux/at91/patches-2.6.22/007-mtd-partition.patch new file mode 100644 index 0000000..cd074cc --- /dev/null +++ b/target/linux/at91/patches-2.6.22/007-mtd-partition.patch @@ -0,0 +1,39 @@ +diff -urN linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c +--- linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c 2007-07-29 07:50:05.000000000 +0200 ++++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c 2007-07-29 07:56:11.000000000 +0200 +@@ -173,7 +173,7 @@ + }; + #endif + +-static const char *part_probes[] = { "cmdlinepart", NULL, }; ++static const char *part_probes[] = { "cmdlinepart", "at91part", NULL, }; + + #endif + +diff -urN linux-2.6.22.1.old/drivers/mtd/Kconfig linux-2.6.22.1/drivers/mtd/Kconfig +--- linux-2.6.22.1.old/drivers/mtd/Kconfig 2007-07-29 07:54:27.000000000 +0200 ++++ linux-2.6.22.1/drivers/mtd/Kconfig 2007-07-29 07:55:21.000000000 +0200 +@@ -160,6 +160,12 @@ + for your particular device. It won't happen automatically. The + 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. + ++config MTD_AT91_PARTS ++ tristate "Atmel AT91 partitioning support" ++ depends on MTD_PARTITIONS && ARCH_AT91RM9200 && AT91_SPI ++ ---help--- ++ Atmel AT91 partitioning support ++ + comment "User Modules And Translation Layers" + + config MTD_CHAR +diff -urN linux-2.6.22.1.old/drivers/mtd/Makefile linux-2.6.22.1/drivers/mtd/Makefile +--- linux-2.6.22.1.old/drivers/mtd/Makefile 2007-07-10 20:56:30.000000000 +0200 ++++ linux-2.6.22.1/drivers/mtd/Makefile 2007-07-29 07:55:39.000000000 +0200 +@@ -11,6 +11,7 @@ + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o ++obj-$(CONFIG_MTD_AT91_PARTS) += at91part.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/at91/patches-2.6.22/008-fdl-serial.patch b/target/linux/at91/patches-2.6.22/008-fdl-serial.patch new file mode 100644 index 0000000..4258919 --- /dev/null +++ b/target/linux/at91/patches-2.6.22/008-fdl-serial.patch @@ -0,0 +1,160 @@ +--- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/drivers/serial/atmel_serial.c 2007-05-28 16:39:09.000000000 +0200 +@@ -174,7 +174,35 @@ + at91_set_gpio_value(AT91_PIN_PA21, 0); + else + at91_set_gpio_value(AT91_PIN_PA21, 1); ++ ++ /* ++ * FDL VersaLink adds GPIOS to provide full modem control on ++ * USART 0 - Drive DTR and RI pins manually ++ */ ++ if (mctrl & TIOCM_DTR) ++ at91_set_gpio_value(AT91_PIN_PB6, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB6, 1); ++ if (mctrl & TIOCM_RI) ++ at91_set_gpio_value(AT91_PIN_PB7, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB7, 1); + } ++ ++ /* ++ * FDL VersaLink adds GPIOS to provide full modem control on ++ * USART 3 - Drive DTR and RI pins manually ++ */ ++ if (port->mapbase == AT91RM9200_BASE_US3) { ++ if (mctrl & TIOCM_DTR) ++ at91_set_gpio_value(AT91_PIN_PB29, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB29, 1); ++ if (mctrl & TIOCM_RI) ++ at91_set_gpio_value(AT91_PIN_PB2, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB2, 1); ++ } + } + #endif + +@@ -211,8 +239,10 @@ + /* + * The control signals are active low. + */ +- if (!(status & ATMEL_US_DCD)) +- ret |= TIOCM_CD; ++ ++ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3)) ++ if (!(status & ATMEL_US_DCD)) ++ ret |= TIOCM_CD; + if (!(status & ATMEL_US_CTS)) + ret |= TIOCM_CTS; + if (!(status & ATMEL_US_DSR)) +@@ -220,6 +250,16 @@ + if (!(status & ATMEL_US_RI)) + ret |= TIOCM_RI; + ++ /* ++ * Read the GPIO's for the FDL VersaLink special case ++ */ ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ if (!(at91_get_gpio_value(AT91_PIN_PA19))) ++ ret |= TIOCM_CD; ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ if (!(at91_get_gpio_value(AT91_PIN_PA24))) ++ ret |= TIOCM_CD; ++ + return ret; + } + +@@ -511,6 +551,34 @@ + } + + /* ++ * USART0 DCD Interrupt handler ++ */ ++ ++static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id) ++{ ++ struct uart_port *port = dev_id; ++ int status = at91_get_gpio_value(irq); ++ ++ uart_handle_dcd_change(port, !(status)); ++ ++ return IRQ_HANDLED; ++} ++ ++/* ++ * USART3 DCD Interrupt handler ++ */ ++ ++static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id) ++{ ++ struct uart_port *port = dev_id; ++ int status = at91_get_gpio_value(irq); ++ ++ uart_handle_dcd_change(port, !(status)); ++ ++ return IRQ_HANDLED; ++} ++ ++/* + * Interrupt handler + */ + static irqreturn_t atmel_interrupt(int irq, void *dev_id) +@@ -587,6 +655,23 @@ + return retval; + } + ++ if (port->mapbase == AT91RM9200_BASE_US0) { ++ retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port); ++ if (retval) { ++ printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n"); ++ free_irq(port->irq, port); ++ return retval; ++ } ++ } ++ if (port->mapbase == AT91RM9200_BASE_US3) { ++ retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port); ++ if (retval) { ++ printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n"); ++ free_irq(port->irq, port); ++ return retval; ++ } ++ } ++ + /* + * Initialize DMA (if necessary) + */ +@@ -603,6 +688,10 @@ + kfree(atmel_port->pdc_rx[0].buf); + } + free_irq(port->irq, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); + return -ENOMEM; + } + pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); +@@ -636,6 +725,10 @@ + retval = atmel_open_hook(port); + if (retval) { + free_irq(port->irq, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); + return retval; + } + } +@@ -701,6 +794,10 @@ + * Free the interrupt + */ + free_irq(port->irq, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); + + /* + * If there is a specific "close" function (to unregister diff --git a/target/linux/at91/patches-2.6.22/009-fdl-uartinit.patch b/target/linux/at91/patches-2.6.22/009-fdl-uartinit.patch new file mode 100644 index 0000000..f36f386 --- /dev/null +++ b/target/linux/at91/patches-2.6.22/009-fdl-uartinit.patch @@ -0,0 +1,27 @@ +diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c +--- linux-2.6.22.1.old/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-29 06:46:13.000000000 +0200 ++++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-29 07:23:35.000000000 +0200 +@@ -721,6 +721,10 @@ + * We need to drive the pin manually. Default is off (RTS is active low). + */ + at91_set_gpio_output(AT91_PIN_PA21, 1); ++ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */ ++ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */ ++ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */ ++ at91_set_deglitch(AT91_PIN_PA19, 1); + } + + static struct resource uart1_resources[] = { +@@ -832,6 +836,12 @@ + { + at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ + at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ ++ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ ++ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ ++ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */ ++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */ ++ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */ ++ at91_set_deglitch(AT91_PIN_PA24, 1); + } + + struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ diff --git a/target/linux/at91/patches-2.6.22/010-dm9161a-phyfix.patch b/target/linux/at91/patches-2.6.22/010-dm9161a-phyfix.patch new file mode 100644 index 0000000..9ad8c42 --- /dev/null +++ b/target/linux/at91/patches-2.6.22/010-dm9161a-phyfix.patch @@ -0,0 +1,28 @@ +--- linux-2.6.21.1/drivers/net/arm/at91_ether.c.old 2007-06-04 18:15:49.000000000 +0200 ++++ linux-2.6.21.1/drivers/net/arm/at91_ether.c 2007-06-04 18:10:36.000000000 +0200 +@@ -146,6 +146,7 @@ + struct at91_private *lp = netdev_priv(dev); + unsigned int bmsr, bmcr, lpa, mac_cfg; + unsigned int speed, duplex; ++ unsigned long timeout = jiffies + HZ; + + if (!mii_link_ok(&lp->mii)) { /* no link */ + netif_carrier_off(dev); +@@ -158,8 +159,15 @@ + read_phy(lp->phy_address, MII_BMSR, &bmsr); + read_phy(lp->phy_address, MII_BMCR, &bmcr); + if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */ +- if (!(bmsr & BMSR_ANEGCOMPLETE)) +- return; /* Do nothing - another interrupt generated when negotiation complete */ ++ while (!(bmsr & BMSR_ANEGCOMPLETE)) { ++ if (time_after(jiffies, timeout)) { ++ printk("at91_ether: Auto-negotiate timeout\n"); ++ return; ++ } ++ read_phy(lp->phy_address, MII_BMSR, &bmsr); ++ read_phy(lp->phy_address, MII_BMCR, &bmcr); ++ cpu_relax(); ++ } + + read_phy(lp->phy_address, MII_LPA, &lpa); + if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100; diff --git a/target/linux/at91/patches-2.6.22/014-initpartition.patch b/target/linux/at91/patches-2.6.22/014-initpartition.patch new file mode 100644 index 0000000..cfcd062 --- /dev/null +++ b/target/linux/at91/patches-2.6.22/014-initpartition.patch @@ -0,0 +1,19 @@ +diff -urN linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c +--- linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c 2007-07-29 07:18:10.000000000 +0200 ++++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c 2007-07-29 07:32:52.000000000 +0200 +@@ -161,12 +161,12 @@ + .mask_flags = MTD_WRITEABLE, /* read-only */ + }, + { +- .name = "kernel", ++ .name = "knlroot", + .offset = MTDPART_OFS_NXTBLK, +- .size = 5 * 32 * 8 * 1056, /* 5 sectors */ ++ .size = 0x320400, + }, + { +- .name = "filesystem", ++ .name = "jffs2", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */ + } |