diff options
Diffstat (limited to 'target/linux/ath79/dts/qca9557.dtsi')
| -rw-r--r-- | target/linux/ath79/dts/qca9557.dtsi | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/target/linux/ath79/dts/qca9557.dtsi b/target/linux/ath79/dts/qca9557.dtsi deleted file mode 100644 index 6058552..0000000 --- a/target/linux/ath79/dts/qca9557.dtsi +++ /dev/null @@ -1,201 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,qca9557"; - - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9557-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - - interrupts = <3>; - - clocks = <&pll ATH79_CLK_REF>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar9557-gpio", - "qca,ar9340-gpio"; - reg = <0x18040000 0x28>; - - interrupts = <2>; - ngpios = <24>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pinmux: pinmux@1804002c { - compatible = "pinctrl-single"; - - reg = <0x1804002c 0x40>; - - #size-cells = <0>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - jtag_disable_pins: pinmux_jtag_disable_pins { - pinctrl-single,bits = <0x40 0x2 0x2>; - }; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar9557-pll", - "qca,qca9550-pll"; - reg = <0x18050000 0x20>; - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar9557-reset", - "qca,ar7100-reset", - "simple-bus"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - interrupt-parent = <&cpuintc>; - - intc2: interrupt-controller@2 { - compatible = "qcom,qca9556-intc"; - - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - qcom,pending-bits = <0x1f0>, /* pcie rc1 */ - <0xf>; /* wmac */ - }; - - intc3: interrupt-controller@3 { - compatible = "qcom,qca9556-intc"; - - interrupts = <3>; - - interrupt-controller; - #interrupt-cells = <1>; - - qcom,pending-bits = <0x1f000>, /* pcie rc2 */ - <0x1000000>, /* usb1 */ - <0x10000000>; /* usb2 */ - }; - }; - - pcie0: pcie-controller@180c0000 { - compatible = "qcom,ar7240-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x180c0000 0x1000>, /* CRP */ - <0x180f0000 0x100>, /* CTRL */ - <0x14000000 0x1000>; /* CFG */ - reg-names = "crp_base", "ctrl_base", "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&intc2>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie0 0>; - status = "disabled"; - }; - }; - - spi: spi@1f000000 { - compatible = "qca,ar9557-spi", "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&mdio0 { - resets = <&rst 22>; - reset-names = "mdio"; -}; - -ð0 { - compatible = "qca,qca9550-eth", "syscon"; - - pll-data = <0x82000101 0x80000101 0x80001313>; - phy-mode = "rgmii"; - - resets = <&rst 9>; - reset-names = "mac"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; -}; - -ð1 { - compatible = "qca,qca9550-eth", "syscon"; - - pll-data = <0x82000101 0x80000101 0x80001313>; - phy-mode = "sgmii"; - - resets = <&rst 13>; - reset-names = "mac"; -}; |