diff options
Diffstat (limited to 'target/linux/atheros')
| -rw-r--r-- | target/linux/atheros/patches-3.14/105-ar2315_pci.patch | 69 |
1 files changed, 47 insertions, 22 deletions
diff --git a/target/linux/atheros/patches-3.14/105-ar2315_pci.patch b/target/linux/atheros/patches-3.14/105-ar2315_pci.patch index a4377eb..5487cdc 100644 --- a/target/linux/atheros/patches-3.14/105-ar2315_pci.patch +++ b/target/linux/atheros/patches-3.14/105-ar2315_pci.patch @@ -7,7 +7,7 @@ +obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o --- /dev/null +++ b/arch/mips/ar231x/pci.c -@@ -0,0 +1,229 @@ +@@ -0,0 +1,254 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License @@ -23,6 +23,30 @@ + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + ++/** ++ * Both AR2315 and AR2316 chips have PCI interface unit, which supports DMA ++ * and interrupt. PCI interface supports MMIO access method, but does not ++ * seem to support I/O ports. ++ * ++ * Read/write operation in the region 0x80000000-0xBFFFFFFF causes ++ * a memory read/write command on the PCI bus. 30 LSBs of address on ++ * the bus are taken from memory read/write request and 2 MSBs are ++ * determined by PCI unit configuration. ++ * ++ * To work with the configuration space instead of memory is necessary set ++ * the CFG_SEL bit in the PCI_MISC_CONFIG register. ++ * ++ * Devices on the bus can perform DMA requests via chip BAR1. PCI host ++ * controller BARs are programmend as if an external device is programmed. ++ * Which means that during configuration, IDSEL pin of the chip should be ++ * asserted. ++ * ++ * We know (and support) only one board that uses the PCI interface - ++ * Fonera 2.0g (FON2202). It has a USB EHCI controller connected to the ++ * AR2315 PCI bus. IDSEL pin of USB controller is connected to AD[13] line ++ * and IDSEL pin of AR125 is connected to AD[16] line. ++ */ ++ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> @@ -43,7 +67,8 @@ + +static unsigned long configspace; + -+static int config_access(int devfn, int where, int size, u32 *ptr, bool write) ++static int ar2315_pci_cfg_access(int devfn, int where, int size, u32 *ptr, ++ bool write) +{ + int func = PCI_FUNC(devfn); + int dev = PCI_SLOT(devfn); @@ -91,42 +116,42 @@ + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + -+static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, -+ int size, u32 *value) ++static int ar2315_pci_cfg_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *value) +{ -+ return config_access(devfn, where, size, value, 0); ++ return ar2315_pci_cfg_access(devfn, where, size, value, 0); +} + -+static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, -+ int size, u32 value) ++static int ar2315_pci_cfg_write(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 value) +{ -+ return config_access(devfn, where, size, &value, 1); ++ return ar2315_pci_cfg_access(devfn, where, size, &value, 1); +} + -+static struct pci_ops ar231x_pci_ops = { -+ .read = ar231x_pci_read, -+ .write = ar231x_pci_write, ++static struct pci_ops ar2315_pci_ops = { ++ .read = ar2315_pci_cfg_read, ++ .write = ar2315_pci_cfg_write, +}; + -+static struct resource ar231x_mem_resource = { -+ .name = "AR2315 PCI MEM", ++static struct resource ar2315_mem_resource = { ++ .name = "ar2315-pci-mem", + .start = AR2315_MEM_BASE, + .end = AR2315_MEM_BASE + AR2315_MEM_SIZE - AR2315_IO_SIZE - 1 + + 0x4000000, + .flags = IORESOURCE_MEM, +}; + -+static struct resource ar231x_io_resource = { -+ .name = "AR2315 PCI I/O", ++static struct resource ar2315_io_resource = { ++ .name = "ar2315-pci-io", + .start = AR2315_MEM_BASE + AR2315_MEM_SIZE - AR2315_IO_SIZE, + .end = AR2315_MEM_BASE + AR2315_MEM_SIZE - 1, + .flags = IORESOURCE_IO, +}; + -+static struct pci_controller ar231x_pci_controller = { -+ .pci_ops = &ar231x_pci_ops, -+ .mem_resource = &ar231x_mem_resource, -+ .io_resource = &ar231x_io_resource, ++static struct pci_controller ar2315_pci_controller = { ++ .pci_ops = &ar2315_pci_ops, ++ .mem_resource = &ar2315_mem_resource, ++ .io_resource = &ar2315_io_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; @@ -187,10 +212,10 @@ + /* Remap PCI config space */ + configspace = (unsigned long)ioremap_nocache(AR2315_PCIEXT, + 1 * 1024 * 1024); -+ ar231x_pci_controller.io_map_base = ++ ar2315_pci_controller.io_map_base = + (unsigned long)ioremap_nocache(AR2315_MEM_BASE + + AR2315_MEM_SIZE, AR2315_IO_SIZE); -+ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space*/ ++ set_io_port_base(ar2315_pci_controller.io_map_base); /* PCI I/O space*/ + + reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA); + msleep(20); @@ -231,7 +256,7 @@ + ioport_resource.start = 0x10000000; + ioport_resource.end = 0xffffffff; + -+ register_pci_controller(&ar231x_pci_controller); ++ register_pci_controller(&ar2315_pci_controller); + + return 0; +} |