diff options
Diffstat (limited to 'target/linux/au1000-2.6')
| -rw-r--r-- | target/linux/au1000-2.6/Makefile | 27 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/config | 1595 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch | 26 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch | 16 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/patches/003-zImage.patch | 1364 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch | 279 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch | 24 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/patches/006-mtx1_system_button.patch | 241 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/patches/007-mtx1_sio2.patch | 13 | ||||
| -rw-r--r-- | target/linux/au1000-2.6/patches/008-isdel_cardbus.patch | 63 |
10 files changed, 3648 insertions, 0 deletions
diff --git a/target/linux/au1000-2.6/Makefile b/target/linux/au1000-2.6/Makefile new file mode 100644 index 0000000..5d2711c --- /dev/null +++ b/target/linux/au1000-2.6/Makefile @@ -0,0 +1,27 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +LINUX_VERSION:=2.6.17 +LINUX_RELEASE:=1 +LINUX_KERNEL_MD5SUM:=37ddefe96625502161f075b9d907f21e + +include ./config +include $(INCLUDE_DIR)/kernel.mk +include $(INCLUDE_DIR)/kernel-build.mk + +$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked + [ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches + [ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches + @$(CP) config $(LINUX_DIR)/.config + touch $@ + +$(LINUX_BUILD_DIR)/zImage.flash.srec: $(LINUX_DIR)/vmlinux + $(CP) $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.flash.srec $(LINUX_DIR)/zImage.flash.srec + $(CP) $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.srec $(LINUX_DIR)/zImage.srec + +compile: $(LINUX_BUILD_DIR)/zImage.flash.srec diff --git a/target/linux/au1000-2.6/config b/target/linux/au1000-2.6/config new file mode 100644 index 0000000..e94f884 --- /dev/null +++ b/target/linux/au1000-2.6/config @@ -0,0 +1,1595 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17 +# Mon Jul 31 19:15:16 2006 +# +CONFIG_MIPS=y + +# +# Machine selection +# +CONFIG_MIPS_MTX1=y +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_V2PCI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_QEMU is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_SOC_AU1500=y +CONFIG_SOC_AU1X00=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +# CONFIG_MIPS_MT is not set +CONFIG_64BIT_PHYS_ADDR=y +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_TRAD_SIGNALS=y +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=m +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_FWMARK=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_MULTIPATH_CACHED=y +CONFIG_IP_ROUTE_MULTIPATH_RR=m +CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m +CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m +CONFIG_IP_ROUTE_MULTIPATH_DRR=m +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IPSEC_NAT_TRAVERSAL=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=m +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m + +# +# IP: Virtual Server Configuration +# +CONFIG_IP_VS=m +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=y +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=y + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=y +CONFIG_IP_NF_IRC=y +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m +CONFIG_IP_NF_SIP=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_IPP2P=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_TIME=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +CONFIG_IP_NF_MATCH_LAYER7=m +# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +# CONFIG_IP_NF_TARGET_IMQ is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=y +CONFIG_IP_NF_NAT=y +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_IP_NF_TARGET_REDIRECT=y +CONFIG_IP_NF_TARGET_ROUTE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=y +CONFIG_IP_NF_NAT_FTP=y +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m +CONFIG_IP_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_TTL=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_ARPTABLES is not set +CONFIG_IP_NF_SET=m +CONFIG_IP_NF_SET_MAX=256 +CONFIG_IP_NF_SET_HASHSIZE=1024 +CONFIG_IP_NF_SET_IPMAP=m +CONFIG_IP_NF_SET_MACIPMAP=m +CONFIG_IP_NF_SET_PORTMAP=m +CONFIG_IP_NF_SET_IPHASH=m +CONFIG_IP_NF_SET_NETHASH=m +CONFIG_IP_NF_SET_IPTREE=m +CONFIG_IP_NF_MATCH_SET=m +CONFIG_IP_NF_TARGET_SET=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +CONFIG_IP6_NF_MATCH_OWNER=m +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_IMQ=m +# CONFIG_IP6_NF_TARGET_LOG is not set +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_ROUTE=m +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_RAW is not set + +# +# Bridge: Netfilter Configuration +# +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP_CCID2=m +CONFIG_IP_DCCP_CCID3=m +CONFIG_IP_DCCP_TFRC_LIB=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_ESFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_ESTIMATOR=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ALCHEMY is not set +CONFIG_MTD_MTX1=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_IFB is not set +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_IMQ=m +# CONFIG_IMQ_BEHAVIOR_AA is not set +# CONFIG_IMQ_BEHAVIOR_AB is not set +CONFIG_IMQ_BEHAVIOR_BA=y +# CONFIG_IMQ_BEHAVIOR_BB is not set +CONFIG_IMQ_NUM_DEVS=2 +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MIPS_AU1X00_ENET=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +CONFIG_NET_WIRELESS_RTNETLINK=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +CONFIG_STRIP=m + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_IPW2100=m +CONFIG_IPW2100_MONITOR=y +CONFIG_IPW2100_DEBUG=y +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW_QOS=y +CONFIG_IPW2200_DEBUG=y +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +CONFIG_PCI_HERMES=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_CS=m +CONFIG_BCM43XX=m +CONFIG_BCM43XX_DEBUG=y +CONFIG_BCM43XX_DMA=y +CONFIG_BCM43XX_PIO=y +CONFIG_BCM43XX_DMA_AND_PIO_MODE=y +# CONFIG_BCM43XX_DMA_MODE is not set +# CONFIG_BCM43XX_PIO_MODE is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +CONFIG_SHAPER=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_MTX1_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_ZD1201=m +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRPRIME=m +# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_PHIDGETKIT=m +CONFIG_USB_PHIDGETSERVO=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_LD=m +CONFIG_USB_TEST=m + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=m +CONFIG_RTC_INTF_PROC=m +CONFIG_RTC_INTF_DEV=m + +# +# RTC drivers +# +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +CONFIG_DEVFS_DEBUG=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_SQUASHFS_VMALLOC is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="init=/etc/preinit" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch b/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch new file mode 100644 index 0000000..f2c524a --- /dev/null +++ b/target/linux/au1000-2.6/patches/001-redefinitions_fixes.patch @@ -0,0 +1,26 @@ +--- linux-2.6.16.2/drivers/usb/host/ohci-pci.c 2006-04-07 18:56:47.000000000 +0200 ++++ linux-2.6.16.2.new/drivers/usb/host/ohci-pci.c 2006-04-11 14:20:33.000000000 +0200 +@@ -215,7 +215,7 @@ + #endif + }; + +- ++/* + static int __init ohci_hcd_pci_init (void) + { + printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name); +@@ -227,11 +227,12 @@ + return pci_register_driver (&ohci_pci_driver); + } + module_init (ohci_hcd_pci_init); +- ++*/ + /*-------------------------------------------------------------------------*/ +- ++/* + static void __exit ohci_hcd_pci_cleanup (void) + { + pci_unregister_driver (&ohci_pci_driver); + } + module_exit (ohci_hcd_pci_cleanup); ++*/ diff --git a/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch b/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch new file mode 100644 index 0000000..9a6b05b --- /dev/null +++ b/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch @@ -0,0 +1,16 @@ +diff -urN linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c +--- linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c 2006-04-20 19:16:26.000000000 +0200 +@@ -105,6 +105,12 @@ + #define USE_LOCAL_ACCESSORS /* why? */ + #endif + ++#ifdef CONFIG_MIPS_MTX1 ++#define BOARD_MAP_NAME "MTX-1 Flash" ++#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ ++#define BOARD_FLASH_WIDTH 4 /* 32-bits */ ++#endif ++ + static struct map_info alchemy_map = { + .name = BOARD_MAP_NAME, + }; diff --git a/target/linux/au1000-2.6/patches/003-zImage.patch b/target/linux/au1000-2.6/patches/003-zImage.patch new file mode 100644 index 0000000..1d4c6ad --- /dev/null +++ b/target/linux/au1000-2.6/patches/003-zImage.patch @@ -0,0 +1,1364 @@ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S +--- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,119 @@ ++/* ++ * arch/mips/kernel/head.S ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 1994, 1995 Waldorf Electronics ++ * Written by Ralf Baechle and Andreas Busse ++ * Copyright (C) 1995 - 1999 Ralf Baechle ++ * Copyright (C) 1996 Paul M. Antoine ++ * Modified for DECStation and hence R3000 support by Paul M. Antoine ++ * Further modifications by David S. Miller and Harald Koerfgen ++ * Copyright (C) 1999 Silicon Graphics, Inc. ++ * ++ * Head.S contains the MIPS exception handler and startup code. ++ * ++ ************************************************************************** ++ * 9 Nov, 2000. ++ * Added Cache Error exception handler and SBDDP EJTAG debug exception. ++ * ++ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com ++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. ++ ************************************************************************** ++ */ ++#include <linux/config.h> ++#include <linux/threads.h> ++ ++#include <asm/asm.h> ++#include <asm/cacheops.h> ++#include <asm/mipsregs.h> ++#include <asm/cachectl.h> ++#include <asm/regdef.h> ++ ++#define IndexInvalidate_I 0x00 ++#define IndexWriteBack_D 0x01 ++ ++ .set noreorder ++ .cprestore ++ LEAF(start) ++start: ++ bal locate ++ nop ++locate: ++ subu s8, ra, 8 /* Where we were loaded */ ++ la sp, (.stack + 8192) ++ ++ move s0, a0 /* Save boot rom start args */ ++ move s1, a1 ++ move s2, a2 ++ move s3, a3 ++ ++ la a0, start /* Where we were linked to run */ ++ ++ move a1, s8 ++ la a2, _edata ++ subu t1, a2, a0 ++ srl t1, t1, 2 ++ ++ /* copy text section */ ++ li t0, 0 ++1: lw v0, 0(a1) ++ nop ++ sw v0, 0(a0) ++ xor t0, t0, v0 ++ addu a0, 4 ++ bne a2, a0, 1b ++ addu a1, 4 ++ ++ /* Clear BSS */ ++ la a0, _edata ++ la a2, _end ++2: sw zero, 0(a0) ++ bne a2, a0, 2b ++ addu a0, 4 ++ ++ /* push the D-Cache and invalidate I-Cache */ ++ li k0, 0x80000000 # start address ++ li k1, 0x80004000 # end address (16KB I-Cache) ++ subu k1, 128 ++ ++1: ++ .set mips3 ++ cache IndexWriteBack_D, 0(k0) ++ cache IndexWriteBack_D, 32(k0) ++ cache IndexWriteBack_D, 64(k0) ++ cache IndexWriteBack_D, 96(k0) ++ cache IndexInvalidate_I, 0(k0) ++ cache IndexInvalidate_I, 32(k0) ++ cache IndexInvalidate_I, 64(k0) ++ cache IndexInvalidate_I, 96(k0) ++ .set mips0 ++ ++ bne k0, k1, 1b ++ addu k0, k0, 128 ++ /* done */ ++ ++ move a0, s8 /* load address */ ++ move a1, t1 /* length in words */ ++ move a2, t0 /* checksum */ ++ move a3, sp ++ ++ la ra, 1f ++ la k0, decompress_kernel ++ jr k0 ++ nop ++1: ++ ++ move a0, s0 ++ move a1, s1 ++ move a2, s2 ++ move a3, s3 ++ li k0, KERNEL_ENTRY ++ jr k0 ++ nop ++3: ++ b 3b ++ END(start) ++ .comm .stack,4096*2,4 +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,110 @@ ++# arch/mips/boot/compressed/au1xxx/Makefile ++# ++# Makefile for AMD Alchemy Semiconductor Au1x based boards. ++# All of the boot loader code was derived from the ppc ++# boot code. ++# ++# Copyright 2001,2002 MontaVista Software Inc. ++# ++# Author: Mark A. Greer ++# mgreer@mvista.com ++# ++# Copyright 2004 Embedded Alley Solutions, Inc ++# Ported and modified for mips 2.6 support by ++# Pete Popov <ppopov@embeddedalley.com> ++# ++# This program is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by the ++# Free Software Foundation; either version 2 of the License, or (at your ++# option) any later version. ++ ++boot := arch/mips/boot ++compressed := $(boot)/compressed ++utils := $(compressed)/utils ++lib := $(compressed)/lib ++images := $(compressed)/images ++common := $(compressed)/common ++ ++######################################################################### ++# START BOARD SPECIFIC VARIABLES ++ ++# These two variables control where the zImage is stored ++# in flash and loaded in memory. It only controls how the srec ++# file is generated, the code is the same. ++RAM_RUN_ADDR = 0x81000000 ++ ++ifdef CONFIG_MIPS_XXS1500 ++FLASH_LOAD_ADDR = 0xBF000000 ++else ++FLASH_LOAD_ADDR = 0xBFD00000 ++endif ++ ++# These two variables specify the free ram region ++# that can be used for temporary malloc area ++AVAIL_RAM_START=0x80500000 ++AVAIL_RAM_END=0x80900000 ++ ++# This one must match the LOADADDR in arch/mips/Makefile! ++LOADADDR=0x80100000 ++ ++# WARNING WARNING WARNING ++# Note that with a LOADADDR of 0x80100000 and AVAIL_RAM_START of ++# 0x80500000, the max decompressed kernel size can be 4MB. Else we ++# start overwriting ourselve. You can change these vars as needed; ++# it would be much better if we just figured everything out on the fly. ++ ++# END BOARD SPECIFIC VARIABLES ++######################################################################### ++ ++OBJECTS := $(obj)/head.o $(common)/misc-common.o $(common)/misc-simple.o \ ++ $(common)/au1k_uart.o ++LIBS := $(lib)/lib.a ++ ++ENTRY := $(utils)/entry ++OFFSET := $(utils)/offset ++SIZE := $(utils)/size ++ ++LD_ARGS := -T $(compressed)/ld.script -Ttext $(RAM_RUN_ADDR) -Bstatic ++ ++ifdef CONFIG_CPU_LITTLE_ENDIAN ++OBJCOPY_ARGS = -O elf32-tradlittlemips ++else ++OBJCOPY_ARGS = -O elf32-tradbigmips ++endif ++ ++$(obj)/head.o: $(obj)/head.S $(TOPDIR)/vmlinux ++ $(CC) -I $(TOPDIR)/include $(AFLAGS) \ ++ -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) $(TOPDIR)/vmlinux ) \ ++ -c -o $*.o $< ++ ++$(common)/misc-simple.o: ++ $(CC) -I $(TOPDIR)/include $(CFLAGS) -DINITRD_OFFSET=0 -DINITRD_SIZE=0 -DZIMAGE_OFFSET=0 \ ++ -DAVAIL_RAM_START=$(AVAIL_RAM_START) \ ++ -DAVAIL_RAM_END=$(AVAIL_RAM_END) \ ++ -DLOADADDR=$(LOADADDR) \ ++ -DZIMAGE_SIZE=0 -c -o $@ $*.c ++ ++$(obj)/zvmlinux: $(OBJECTS) $(LIBS) $(srctree)/$(compressed)/ld.script $(images)/vmlinux.gz $(common)/dummy.o ++ $(OBJCOPY) \ ++ --add-section=.image=$(images)/vmlinux.gz \ ++ --set-section-flags=.image=contents,alloc,load,readonly,data \ ++ $(common)/dummy.o $(common)/image.o ++ $(LD) $(LD_ARGS) -o $@ $(OBJECTS) $(common)/image.o $(LIBS) ++ $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R __kcrctab -R __ksymtab_strings \ ++ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap ++ ++# Here we manipulate the image in order to get it the necessary ++# srecord file we need. ++zImage: $(obj)/zvmlinux ++ mv $(obj)/zvmlinux $(images)/zImage ++ $(OBJCOPY) -O srec $(images)/zImage $(images)/zImage.srec ++ $(OBJCOPY) -O binary $(images)/zImage $(images)/zImage.bin ++ ++zImage.flash: zImage ++ ( \ ++ flash=${FLASH_LOAD_ADDR} ; \ ++ ram=${RAM_RUN_ADDR} ; \ ++ adjust=$$[ $$flash - $$ram ] ; \ ++ $(OBJCOPY) -O srec --adjust-vma `printf '0x%08x' $$adjust` \ ++ $(images)/zImage $(images)/zImage.flash.srec ; \ ++ ) +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,103 @@ ++/* ++ * BRIEF MODULE DESCRIPTION ++ * Simple Au1000 uart routines. ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ * Author: MontaVista Software, Inc. ++ * ppopov@mvista.com or source@mvista.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/config.h> ++#include <asm/io.h> ++#include <asm/mach-au1x00/au1000.h> ++#include "ns16550.h" ++ ++typedef unsigned char uint8; ++typedef unsigned int uint32; ++ ++#define UART16550_BAUD_2400 2400 ++#define UART16550_BAUD_4800 4800 ++#define UART16550_BAUD_9600 9600 ++#define UART16550_BAUD_19200 19200 ++#define UART16550_BAUD_38400 38400 ++#define UART16550_BAUD_57600 57600 ++#define UART16550_BAUD_115200 115200 ++ ++#define UART16550_PARITY_NONE 0 ++#define UART16550_PARITY_ODD 0x08 ++#define UART16550_PARITY_EVEN 0x18 ++#define UART16550_PARITY_MARK 0x28 ++#define UART16550_PARITY_SPACE 0x38 ++ ++#define UART16550_DATA_5BIT 0x0 ++#define UART16550_DATA_6BIT 0x1 ++#define UART16550_DATA_7BIT 0x2 ++#define UART16550_DATA_8BIT 0x3 ++ ++#define UART16550_STOP_1BIT 0x0 ++#define UART16550_STOP_2BIT 0x4 ++ ++/* It would be nice if we had a better way to do this. ++ * It could be a variable defined in one of the board specific files. ++ */ ++#undef UART_BASE ++#ifdef CONFIG_COGENT_CSB250 ++#define UART_BASE UART3_ADDR ++#else ++#define UART_BASE UART0_ADDR ++#endif ++ ++/* memory-mapped read/write of the port */ ++#define UART16550_READ(y) (au_readl(UART_BASE + y) & 0xff) ++#define UART16550_WRITE(y,z) (au_writel(z&0xff, UART_BASE + y)) ++ ++/* ++ * We use uart 0, which is already initialized by ++ * yamon. ++ */ ++volatile struct NS16550 * ++serial_init(int chan) ++{ ++ volatile struct NS16550 *com_port; ++ com_port = (struct NS16550 *) UART_BASE; ++ return (com_port); ++} ++ ++void ++serial_putc(volatile struct NS16550 *com_port, unsigned char c) ++{ ++ while ((UART16550_READ(UART_LSR)&0x40) == 0); ++ UART16550_WRITE(UART_TX, c); ++} ++ ++unsigned char ++serial_getc(volatile struct NS16550 *com_port) ++{ ++ while((UART16550_READ(UART_LSR) & 0x1) == 0); ++ return UART16550_READ(UART_RX); ++} ++ ++int ++serial_tstc(volatile struct NS16550 *com_port) ++{ ++ return((UART16550_READ(UART_LSR) & LSR_DR) != 0); ++} +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,4 @@ ++int main(void) ++{ ++ return 0; ++} +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,14 @@ ++# ++# arch/mips/boot/compressed/common/Makefile ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Tom Rini January 2001 ++# ++# Pete Popov, 2004 ++# ++ ++lib-y := misc-common.o no_initrd.o dummy.o ++lib-$(CONFIG_SOC_AU1X00) += au1k_uart.o +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,434 @@ ++/* ++ * arch/mips/boot/compressed/common/misc-common.c ++ * ++ * Misc. bootloader code (almost) all platforms can use ++ * ++ * Author: Johnnie Peters <jpeters@mvista.com> ++ * Editor: Tom Rini <trini@mvista.com> ++ * ++ * Derived from arch/ppc/boot/prep/misc.c ++ * ++ * Ported by Pete Popov <ppopov@mvista.com> to ++ * support mips board(s). I also got rid of the vga console ++ * code. ++ * ++ * Copyright 2000-2001 MontaVista Software Inc. ++ * ++ * Ported to MIPS 2.6 by Pete Popov, <ppopov@embeddedalley.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <stdarg.h> /* for va_ bits */ ++#include <linux/config.h> ++#include <linux/string.h> ++#include <linux/zlib.h> ++ ++extern char *avail_ram; ++extern char *end_avail; ++extern char _end[]; ++ ++void puts(const char *); ++void putc(const char c); ++void puthex(unsigned long val); ++void _bcopy(char *src, char *dst, int len); ++void gunzip(void *, int, unsigned char *, int *); ++static int _cvt(unsigned long val, char *buf, long radix, char *digits); ++ ++void _vprintk(void(*)(const char), const char *, va_list ap); ++ ++struct NS16550 *com_port; ++ ++int serial_tstc(volatile struct NS16550 *); ++unsigned char serial_getc(volatile struct NS16550 *); ++void serial_putc(volatile struct NS16550 *, unsigned char); ++ ++void pause(void) ++{ ++ puts("pause\n"); ++} ++ ++void exit(void) ++{ ++ puts("exit\n"); ++ while(1); ++} ++ ++int tstc(void) ++{ ++ return (serial_tstc(com_port)); ++} ++ ++int getc(void) ++{ ++ while (1) { ++ if (serial_tstc(com_port)) ++ return (serial_getc(com_port)); ++ } ++} ++ ++void ++putc(const char c) ++{ ++ serial_putc(com_port, c); ++ if ( c == '\n' ) ++ serial_putc(com_port, '\r'); ++} ++ ++void puts(const char *s) ++{ ++ char c; ++ while ( ( c = *s++ ) != '\0' ) { ++ serial_putc(com_port, c); ++ if ( c == '\n' ) serial_putc(com_port, '\r'); ++ } ++} ++ ++void error(char *x) ++{ ++ puts("\n\n"); ++ puts(x); ++ puts("\n\n -- System halted"); ++ ++ while(1); /* Halt */ ++} ++ ++static void *zalloc(unsigned size) ++{ ++ void *p = avail_ram; ++ ++ size = (size + 7) & -8; ++ avail_ram += size; ++ if (avail_ram > end_avail) { ++ puts("oops... out of memory\n"); ++ pause(); ++ } ++ return p; ++} ++ ++ ++#define HEAD_CRC 2 ++#define EXTRA_FIELD 4 ++#define ORIG_NAME 8 ++#define COMMENT 0x10 ++#define RESERVED 0xe0 ++ ++#define DEFLATED 8 ++ ++void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) ++{ ++ z_stream s; ++ int r, i, flags; ++ ++ /* skip header */ ++ i = 10; ++ flags = src[3]; ++ if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { ++ puts("bad gzipped data\n"); ++ exit(); ++ } ++ if ((flags & EXTRA_FIELD) != 0) ++ i = 12 + src[10] + (src[11] << 8); ++ if ((flags & ORIG_NAME) != 0) ++ while (src[i++] != 0) ++ ; ++ if ((flags & COMMENT) != 0) ++ while (src[i++] != 0) ++ ; ++ if ((flags & HEAD_CRC) != 0) ++ i += 2; ++ if (i >= *lenp) { ++ puts("gunzip: ran out of data in header\n"); ++ exit(); ++ } ++ ++ /* Initialize ourself. */ ++ s.workspace = zalloc(zlib_inflate_workspacesize()); ++ r = zlib_inflateInit2(&s, -MAX_WBITS); ++ if (r != Z_OK) { ++ puts("zlib_inflateInit2 returned "); puthex(r); puts("\n"); ++ exit(); ++ } ++ s.next_in = src + i; ++ s.avail_in = *lenp - i; ++ s.next_out = dst; ++ s.avail_out = dstlen; ++ r = zlib_inflate(&s, Z_FINISH); ++ if (r != Z_OK && r != Z_STREAM_END) { ++ puts("inflate returned "); puthex(r); puts("\n"); ++ exit(); ++ } ++ *lenp = s.next_out - (unsigned char *) dst; ++ zlib_inflateEnd(&s); ++} ++ ++void ++puthex(unsigned long val) ++{ ++ ++ unsigned char buf[10]; ++ int i; ++ for (i = 7; i >= 0; i--) ++ { ++ buf[i] = "0123456789ABCDEF"[val & 0x0F]; ++ val >>= 4; ++ } ++ buf[8] = '\0'; ++ puts(buf); ++} ++ ++#define FALSE 0 ++#define TRUE 1 ++ ++void ++_printk(char const *fmt, ...) ++{ ++ va_list ap; ++ ++ va_start(ap, fmt); ++ _vprintk(putc, fmt, ap); ++ va_end(ap); ++ return; ++} ++ ++#define is_digit(c) ((c >= '0') && (c <= '9')) ++ ++void ++_vprintk(void(*putc)(const char), const char *fmt0, va_list ap) ++{ ++ char c, sign, *cp = 0; ++ int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right; ++ char buf[32]; ++ long val; ++ while ((c = *fmt0++)) ++ { ++ if (c == '%') ++ { ++ c = *fmt0++; ++ left_prec = right_prec = pad_on_right = 0; ++ if (c == '-') ++ { ++ c = *fmt0++; ++ pad_on_right++; ++ } ++ if (c == '0') ++ { ++ zero_fill = TRUE; ++ c = *fmt0++; ++ } else ++ { ++ zero_fill = FALSE; ++ } ++ while (is_digit(c)) ++ { ++ left_prec = (left_prec * 10) + (c - '0'); ++ c = *fmt0++; ++ } ++ if (c == '.') ++ { ++ c = *fmt0++; ++ zero_fill++; ++ while (is_digit(c)) ++ { ++ right_prec = (right_prec * 10) + (c - '0'); ++ c = *fmt0++; ++ } ++ } else ++ { ++ right_prec = left_prec; ++ } ++ sign = '\0'; ++ switch (c) ++ { ++ case 'd': ++ case 'x': ++ case 'X': ++ val = va_arg(ap, long); ++ switch (c) ++ { ++ case 'd': ++ if (val < 0) ++ { ++ sign = '-'; ++ val = -val; ++ } ++ length = _cvt(val, buf, 10, "0123456789"); ++ break; ++ case 'x': ++ length = _cvt(val, buf, 16, "0123456789abcdef"); ++ break; ++ case 'X': ++ length = _cvt(val, buf, 16, "0123456789ABCDEF"); ++ break; ++ } ++ cp = buf; ++ break; ++ case 's': ++ cp = va_arg(ap, char *); ++ length = strlen(cp); ++ break; ++ case 'c': ++ c = va_arg(ap, long /*char*/); ++ (*putc)(c); ++ continue; ++ default: ++ (*putc)('?'); ++ } ++ pad = left_prec - length; ++ if (sign != '\0') ++ { ++ pad--; ++ } ++ if (zero_fill) ++ { ++ c = '0'; ++ if (sign != '\0') ++ { ++ (*putc)(sign); ++ sign = '\0'; ++ } ++ } else ++ { ++ c = ' '; ++ } ++ if (!pad_on_right) ++ { ++ while (pad-- > 0) ++ { ++ (*putc)(c); ++ } ++ } ++ if (sign != '\0') ++ { ++ (*putc)(sign); ++ } ++ while (length-- > 0) ++ { ++ (*putc)(c = *cp++); ++ if (c == '\n') ++ { ++ (*putc)('\r'); ++ } ++ } ++ if (pad_on_right) ++ { ++ while (pad-- > 0) ++ { ++ (*putc)(c); ++ } ++ } ++ } else ++ { ++ (*putc)(c); ++ if (c == '\n') ++ { ++ (*putc)('\r'); ++ } ++ } ++ } ++} ++ ++int ++_cvt(unsigned long val, char *buf, long radix, char *digits) ++{ ++ char temp[80]; ++ char *cp = temp; ++ int length = 0; ++ if (val == 0) ++ { /* Special case */ ++ *cp++ = '0'; ++ } else ++ while (val) ++ { ++ *cp++ = digits[val % radix]; ++ val /= radix; ++ } ++ while (cp != temp) ++ { ++ *buf++ = *--cp; ++ length++; ++ } ++ *buf = '\0'; ++ return (length); ++} ++ ++void ++_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base) ++{ ++ int i, c; ++ if ((unsigned int)s > (unsigned int)p) ++ { ++ s = (unsigned int)s - (unsigned int)p; ++ } ++ while (s > 0) ++ { ++ if (base) ++ { ++ _printk("%06X: ", (int)p - (int)base); ++ } else ++ { ++ _printk("%06X: ", p); ++ } ++ for (i = 0; i < 16; i++) ++ { ++ if (i < s) ++ { ++ _printk("%02X", p[i] & 0xFF); ++ } else ++ { ++ _printk(" "); ++ } ++ if ((i % 2) == 1) _printk(" "); ++ if ((i % 8) == 7) _printk(" "); ++ } ++ _printk(" |"); ++ for (i = 0; i < 16; i++) ++ { ++ if (i < s) ++ { ++ c = p[i] & 0xFF; ++ if ((c < 0x20) || (c >= 0x7F)) c = '.'; ++ } else ++ { ++ c = ' '; ++ } ++ _printk("%c", c); ++ } ++ _printk("|\n"); ++ s -= 16; ++ p += 16; ++ } ++} ++ ++void ++_dump_buf(unsigned char *p, int s) ++{ ++ _printk("\n"); ++ _dump_buf_with_offset(p, s, 0); ++} ++ ++/* ++ * Local variables: ++ * c-indent-level: 8 ++ * c-basic-offset: 8 ++ * tab-width: 8 ++ * End: ++ */ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,122 @@ ++/* ++ * arch/mips/zboot/common/misc-simple.c ++ * ++ * Misc. bootloader code for many machines. This assumes you have are using ++ * a 6xx/7xx/74xx CPU in your machine. This assumes the chunk of memory ++ * below 8MB is free. Finally, it assumes you have a NS16550-style uart for ++ * your serial console. If a machine meets these requirements, it can quite ++ * likely use this code during boot. ++ * ++ * Author: Matt Porter <mporter@mvista.com> ++ * Derived from arch/ppc/boot/prep/misc.c ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#include <linux/types.h> ++#include <linux/elf.h> ++#include <linux/config.h> ++ ++#include <asm/page.h> ++ ++#include "linux/zlib.h" ++ ++extern struct NS16550 *com_port; ++ ++char *avail_ram; ++char *end_avail; ++extern char _end[]; ++char *zimage_start; ++ ++#ifdef CONFIG_CMDLINE ++#define CMDLINE CONFIG_CMDLINE ++#else ++#define CMDLINE "" ++#endif ++char cmd_preset[] = CMDLINE; ++char cmd_buf[256]; ++char *cmd_line = cmd_buf; ++ ++/* The linker tells us where the image is. ++*/ ++extern unsigned char __image_begin, __image_end; ++extern unsigned char __ramdisk_begin, __ramdisk_end; ++unsigned long initrd_size; ++ ++extern void puts(const char *); ++extern void putc(const char c); ++extern void puthex(unsigned long val); ++extern void *memcpy(void * __dest, __const void * __src, ++ __kernel_size_t __n); ++extern void gunzip(void *, int, unsigned char *, int *); ++extern void udelay(long delay); ++extern int tstc(void); ++extern int getc(void); ++extern volatile struct NS16550 *serial_init(int chan); ++ ++void ++decompress_kernel(unsigned long load_addr, int num_words, ++ unsigned long cksum, unsigned long *sp) ++{ ++ extern unsigned long start; ++ int zimage_size; ++ ++ com_port = (struct NS16550 *)serial_init(0); ++ ++ initrd_size = (unsigned long)(&__ramdisk_end) - ++ (unsigned long)(&__ramdisk_begin); ++ ++ /* ++ * Reveal where we were loaded at and where we ++ * were relocated to. ++ */ ++ puts("loaded at: "); puthex(load_addr); ++ puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n"); ++ if ( (unsigned long)load_addr != (unsigned long)&start ) ++ { ++ puts("relocated to: "); puthex((unsigned long)&start); ++ puts(" "); ++ puthex((unsigned long)((unsigned long)&start + (4*num_words))); ++ puts("\n"); ++ } ++ ++ /* ++ * We link ourself to an arbitrary low address. When we run, we ++ * relocate outself to that address. __image_being points to ++ * the part of the image where the zImage is. -- Tom ++ */ ++ zimage_start = (char *)(unsigned long)(&__image_begin); ++ zimage_size = (unsigned long)(&__image_end) - ++ (unsigned long)(&__image_begin); ++ ++ /* ++ * The zImage and initrd will be between start and _end, so they've ++ * already been moved once. We're good to go now. -- Tom ++ */ ++ puts("zimage at: "); puthex((unsigned long)zimage_start); ++ puts(" "); puthex((unsigned long)(zimage_size+zimage_start)); ++ puts("\n"); ++ ++ if ( initrd_size ) { ++ puts("initrd at: "); ++ puthex((unsigned long)(&__ramdisk_begin)); ++ puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); ++ } ++ ++ /* assume the chunk below 8M is free */ ++ avail_ram = (char *)AVAIL_RAM_START; ++ end_avail = (char *)AVAIL_RAM_END; ++ ++ /* Display standard Linux/MIPS boot prompt for kernel args */ ++ puts("Uncompressing Linux at load address "); ++ puthex(LOADADDR); ++ puts("\n"); ++ /* I don't like this hard coded gunzip size (fixme) */ ++ gunzip((void *)LOADADDR, 0x400000, zimage_start, &zimage_size); ++ puts("Now booting the kernel\n"); ++} +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,2 @@ ++char initrd_data[1]; ++int initrd_len = 0; +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,17 @@ ++ ++# ++# This dir holds all of the images for MIPS machines. ++# Tom Rini January 2001 ++# Pete Popov 2004 ++ ++extra-y := vmlinux.bin vmlinux.gz ++ ++OBJCOPYFLAGS_vmlinux.bin := -O binary ++$(obj)/vmlinux.bin: vmlinux FORCE ++ $(call if_changed,objcopy) ++ ++$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE ++ $(call if_changed,gzip) ++ ++# Files generated that shall be removed upon make clean ++clean-files := vmlinux* zImage* +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h +--- linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,18 @@ ++/* ++ * Copyright (C) Paul Mackerras 1997. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++typedef int FILE; ++extern FILE *stdin, *stdout; ++#define NULL ((void *)0) ++#define EOF (-1) ++#define fopen(n, m) NULL ++#define fflush(f) 0 ++#define fclose(f) 0 ++extern char *fgets(); ++ ++#define perror(s) printf("%s: no files!\n", (s)) +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h +--- linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,46 @@ ++/* ++ * NS16550 Serial Port ++ */ ++ ++/* ++ * Figure out which file will have the definitons of COMx ++ */ ++ ++/* Some machines have their uart registers 16 bytes apart. Most don't. ++ * TODO: Make this work like drivers/char/serial does - Tom */ ++#if !defined(UART_REG_PAD) ++#define UART_REG_PAD(x) ++#endif ++ ++struct NS16550 ++ { ++ unsigned char rbr; /* 0 */ ++ UART_REG_PAD(rbr) ++ unsigned char ier; /* 1 */ ++ UART_REG_PAD(ier) ++ unsigned char fcr; /* 2 */ ++ UART_REG_PAD(fcr) ++ unsigned char lcr; /* 3 */ ++ UART_REG_PAD(lcr) ++ unsigned char mcr; /* 4 */ ++ UART_REG_PAD(mcr) ++ unsigned char lsr; /* 5 */ ++ UART_REG_PAD(lsr) ++ unsigned char msr; /* 6 */ ++ UART_REG_PAD(msr) ++ unsigned char scr; /* 7 */ ++ }; ++ ++#define thr rbr ++#define iir fcr ++#define dll rbr ++#define dlm ier ++ ++#define LSR_DR 0x01 /* Data ready */ ++#define LSR_OE 0x02 /* Overrun */ ++#define LSR_PE 0x04 /* Parity error */ ++#define LSR_FE 0x08 /* Framing error */ ++#define LSR_BI 0x10 /* Break */ ++#define LSR_THRE 0x20 /* Xmit holding register empty */ ++#define LSR_TEMT 0x40 /* Xmitter empty */ ++#define LSR_ERR 0x80 /* Error */ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h +--- linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,20 @@ ++/* ++ * arch/ppc/boot/include/sandpoint_serial.h ++ * ++ * Location of the COM ports on Motorola SPS Sandpoint machines ++ * ++ * Author: Mark A. Greer ++ * mgreer@mvista.com ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#define COM1 0xfe0003f8 ++#define COM2 0xfe0002f8 ++#define COM3 0x00000000 /* No COM3 */ ++#define COM4 0x00000000 /* No COM4 */ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/ld.script linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script +--- linux-2.6.16.7/arch/mips/boot/compressed/ld.script 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,151 @@ ++OUTPUT_ARCH(mips) ++ENTRY(start) ++SECTIONS ++{ ++ /* Read-only sections, merged into text segment: */ ++ /* . = 0x81000000; */ ++ .init : { *(.init) } =0 ++ .text : ++ { ++ _ftext = . ; ++ *(.text) ++ *(.rodata) *(.rodata.*) ++ *(.rodata1) ++ /* .gnu.warning sections are handled specially by elf32.em. */ ++ *(.gnu.warning) ++ } =0 ++ .kstrtab : { *(.kstrtab) } ++ ++ . = ALIGN(16); /* Exception table */ ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ __start___dbe_table = .; /* Exception table for data bus errors */ ++ __dbe_table : { *(__dbe_table) } ++ __stop___dbe_table = .; ++ ++ __start___ksymtab = .; /* Kernel symbol table */ ++ __ksymtab : { *(__ksymtab) } ++ __stop___ksymtab = .; ++ ++ _etext = .; ++ ++ . = ALIGN(8192); ++ .data.init_task : { *(.data.init_task) } ++ ++ /* Startup code */ ++ . = ALIGN(4096); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(16); ++ __setup_start = .; ++ .setup.init : { *(.setup.init) } ++ __setup_end = .; ++ __initcall_start = .; ++ .initcall.init : { *(.initcall.init) } ++ __initcall_end = .; ++ . = ALIGN(4096); /* Align double page for init_task_union */ ++ __init_end = .; ++ ++ . = ALIGN(4096); ++ .data.page_aligned : { *(.data.idt) } ++ ++ . = ALIGN(32); ++ .data.cacheline_aligned : { *(.data.cacheline_aligned) } ++ ++ .fini : { *(.fini) } =0 ++ .reginfo : { *(.reginfo) } ++ /* Adjust the address for the data segment. We want to adjust up to ++ the same address within the page on the next page up. It would ++ be more correct to do this: ++ . = .; ++ The current expression does not correctly handle the case of a ++ text segment ending precisely at the end of a page; it causes the ++ data segment to skip a page. The above expression does not have ++ this problem, but it will currently (2/95) cause BFD to allocate ++ a single segment, combining both text and data, for this case. ++ This will prevent the text segment from being shared among ++ multiple executions of the program; I think that is more ++ important than losing a page of the virtual address space (note ++ that no actual memory is lost; the page which is skipped can not ++ be referenced). */ ++ . = .; ++ .data : ++ { ++ _fdata = . ; ++ *(.data) ++ ++ /* Put the compressed image here, so bss is on the end. */ ++ __image_begin = .; ++ *(.image) ++ __image_end = .; ++ /* Align the initial ramdisk image (INITRD) on page boundaries. */ ++ . = ALIGN(4096); ++ __ramdisk_begin = .; ++ *(.initrd) ++ __ramdisk_end = .; ++ . = ALIGN(4096); ++ ++ CONSTRUCTORS ++ } ++ .data1 : { *(.data1) } ++ _gp = . + 0x8000; ++ .lit8 : { *(.lit8) } ++ .lit4 : { *(.lit4) } ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ .got : { *(.got.plt) *(.got) } ++ .dynamic : { *(.dynamic) } ++ /* We want the small data sections together, so single-instruction offsets ++ can access them all, and initialized data all before uninitialized, so ++ we can shorten the on-disk segment size. */ ++ .sdata : { *(.sdata) } ++ . = ALIGN(4); ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ __bss_start = .; ++ _fbss = .; ++ .sbss : { *(.sbss) *(.scommon) } ++ .bss : ++ { ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ . = ALIGN(4); ++ _end = . ; ++ PROVIDE (end = .); ++ } ++ ++ /* Sections to be discarded */ ++ /DISCARD/ : ++ { ++ *(.text.exit) ++ *(.data.exit) ++ *(.exitcall.exit) ++ } ++ ++ /* This is the MIPS specific mdebug section. */ ++ .mdebug : { *(.mdebug) } ++ /* These are needed for ELF backends which have not yet been ++ converted to the new style linker. */ ++ .stab 0 : { *(.stab) } ++ .stabstr 0 : { *(.stabstr) } ++ /* DWARF debug sections. ++ Symbols in the .debug DWARF section are relative to the beginning of the ++ section so we begin .debug at 0. It's not clear yet what needs to happen ++ for the others. */ ++ .debug 0 : { *(.debug) } ++ .debug_srcinfo 0 : { *(.debug_srcinfo) } ++ .debug_aranges 0 : { *(.debug_aranges) } ++ .debug_pubnames 0 : { *(.debug_pubnames) } ++ .debug_sfnames 0 : { *(.debug_sfnames) } ++ .line 0 : { *(.line) } ++ /* These must appear regardless of . */ ++ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } ++ .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } ++ .comment : { *(.comment) } ++ .note : { *(.note) } ++} +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,11 @@ ++ ++# ++# Makefile for some libs needed by zImage. ++# ++ ++lib-y := $(addprefix ../../../../../lib/zlib_inflate/, \ ++ infblock.o infcodes.o inffast.o inflate.o inftrees.o infutil.o) \ ++ $(addprefix ../../../../../lib/, ctype.o string.o) \ ++ $(addprefix ../../../../../arch/mips/lib/, memcpy.o) \ ++ ++ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,32 @@ ++ ++# ++# arch/mips/boot/compressed/Makefile ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Copyright (C) 1994 by Linus Torvalds ++# Adapted for PowerPC by Gary Thomas ++# modified by Cort (cort@cs.nmt.edu) ++# ++# Ported to MIPS by Pete Popov, ppopov@embeddedalley.com ++# ++ ++boot := arch/mips/boot ++compressed := arch/mips/boot/compressed ++ ++CFLAGS += -fno-builtin -D__BOOTER__ -I$(compressed)/include ++ ++BOOT_TARGETS = zImage zImage.flash ++ ++bootdir-$(CONFIG_SOC_AU1X00) := au1xxx ++subdir-y := common lib images ++ ++.PHONY: $(BOOT_TARGETS) $(bootdir-y) ++ ++$(BOOT_TARGETS): $(bootdir-y) ++ ++$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ ++ $(addprefix $(obj)/,$(hostprogs-y)) ++ $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/entry linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry +--- linux-2.6.16.7/arch/mips/boot/compressed/utils/entry 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,12 @@ ++#!/bin/sh ++ ++# grab the kernel_entry address from the vmlinux elf image ++entry=`$1 $2 | grep kernel_entry` ++ ++fs=`echo $entry | grep ffffffff` # check toolchain output ++ ++if [ -n "$fs" ]; then ++ echo "0x"`$1 $2 | grep kernel_entry | cut -c9- | awk '{print $1}'` ++else ++ echo "0x"`$1 $2 | grep kernel_entry | cut -c1- | awk '{print $1}'` ++fi +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/offset linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset +--- linux-2.6.16.7/arch/mips/boot/compressed/utils/offset 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,3 @@ ++#!/bin/sh ++ ++echo "0x"`$1 -h $2 | grep $3 | grep -v zvmlinux| awk '{print $6}'` +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/size linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size +--- linux-2.6.16.7/arch/mips/boot/compressed/utils/size 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size 2006-05-04 23:08:18.000000000 +0200 +@@ -0,0 +1,4 @@ ++#!/bin/sh ++ ++OFFSET=`$1 -h $2 | grep $3 | grep -v zvmlinux | awk '{print $3}'` ++echo "0x"$OFFSET +diff -urN linux-2.6.16.7/arch/mips/boot/Makefile linux-2.6.16.7.new/arch/mips/boot/Makefile +--- linux-2.6.16.7/arch/mips/boot/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/boot/Makefile 2006-05-04 23:08:18.000000000 +0200 +@@ -16,6 +16,7 @@ + E2EFLAGS = + endif + ++ + # + # Drop some uninteresting sections in the kernel. + # This is only relevant for ELF kernels but doesn't hurt a.out +@@ -25,7 +26,10 @@ + + VMLINUX = vmlinux + +-all: vmlinux.ecoff vmlinux.srec addinitrd ++ZBOOT_TARGETS = zImage zImage.flash ++bootdir-y := compressed ++ ++all: vmlinux.ecoff vmlinux.srec addinitrd zImage + + vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) + $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS) +@@ -51,3 +55,11 @@ + vmlinux.bin \ + vmlinux.ecoff \ + vmlinux.srec ++ ++.PHONY: $(ZBOOT_TARGETS) $(bootdir-y) ++ ++$(ZBOOT_TARGETS): $(bootdir-y) ++ ++$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ ++ $(addprefix $(obj)/,$(hostprogs-y)) ++ $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) +diff -urN linux-2.6.16.7/arch/mips/Makefile linux-2.6.16.7.new/arch/mips/Makefile +--- linux-2.6.16.7/arch/mips/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/Makefile 2006-05-04 23:09:44.000000000 +0200 +@@ -831,6 +831,10 @@ + all: vmlinux.ecoff + endif + ++ifdef CONFIG_MIPS_MTX1 ++all: vmlinux.srec zImage zImage.flash ++endif ++ + vmlinux.bin: $(vmlinux-32) + +@$(call makeboot,$@) + +@@ -840,6 +844,12 @@ + vmlinux.srec: $(vmlinux-32) + +@$(call makeboot,$@) + ++zImage: vmlinux ++ +@$(call makeboot,$@) ++ ++zImage.flash: vmlinux ++ +@$(call makeboot,$@) ++ + CLEAN_FILES += vmlinux.ecoff \ + vmlinux.srec \ + vmlinux.rm200.tmp \ +@@ -848,6 +858,7 @@ + archclean: + @$(MAKE) $(clean)=arch/mips/boot + @$(MAKE) $(clean)=arch/mips/lasat ++ @$(MAKE) $(clean)=arch/mips/boot/compressed + + CLEAN_FILES += vmlinux.32 \ + vmlinux.64 \ diff --git a/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch b/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch new file mode 100644 index 0000000..c7e329b --- /dev/null +++ b/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch @@ -0,0 +1,279 @@ +diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/drivers/char/watchdog/Kconfig +--- linux-2.6.16.7/drivers/char/watchdog/Kconfig 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/char/watchdog/Kconfig 2006-04-22 23:23:53.000000000 +0200 +@@ -460,6 +460,14 @@ + timer expired and no process has written to /dev/watchdog during + that time. + ++config MTX1_WATCHDOG ++ tristate "MTX-1 Hardware Watchdog" ++ depends on WATCHDOG && MIPS_MTX1 ++ help ++ Hardware driver for the AccessCube MTX-1 watchdog. This is a ++ watchdog timer that will reboot the machine after a 100 seconds ++ timer expired. ++ + # S390 Architecture + + config ZVM_WATCHDOG +diff -urN linux-2.6.16.7/drivers/char/watchdog/Makefile linux-2.6.16.7.new/drivers/char/watchdog/Makefile +--- linux-2.6.16.7/drivers/char/watchdog/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/char/watchdog/Makefile 2006-04-22 23:21:18.000000000 +0200 +@@ -65,6 +65,7 @@ + + # MIPS Architecture + obj-$(CONFIG_INDYDOG) += indydog.o ++obj-$(CONFIG_MTX1_WATCHDOG) += mtx-1_watchdog.o + + # S390 Architecture + +diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c +--- linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c 2006-04-22 23:20:53.000000000 +0200 +@@ -0,0 +1,246 @@ ++/* ++ * Driver for the MTX-1 Watchdog. ++ * ++ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved. ++ * http://www.4g-systems.biz ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * Neither Michael Stickel nor 4G Systems admit liability nor provide ++ * warranty for any of this software. This material is provided ++ * "AS-IS" and at no charge. ++ * ++ * (c) Copyright 2005 4G Systems <info@4g-systems.biz> ++ * ++ * Release 0.01. ++ * ++ * Author: Michael Stickel michael.stickel@4g-systems.biz ++ * ++ * ++ * The Watchdog is configured to reset the MTX-1 ++ * if it is not triggered for 100 seconds. ++ * It should not be triggered more often than 1.6 seconds. ++ * ++ * A timer triggers the watchdog every 5 seconds, until ++ * it is opened for the first time. After the first open ++ * it MUST be triggered every 2..95 seconds. ++ */ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/miscdevice.h> ++#include <linux/watchdog.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <asm/uaccess.h> ++#include <linux/fs.h> ++ ++#include <asm/mach-au1x00/au1000.h> ++ ++#ifndef FALSE ++# define FALSE (0) ++#endif ++ ++#ifndef TRUE ++# define TRUE (!FALSE) ++#endif ++ ++ ++//---------[ Hardware Functions ]----------------- ++ ++static void mtx1_trigger_wd (void) ++{ ++ /* ++ * toggle GPIO2_15 ++ */ ++ ++ u32 tmp = au_readl(GPIO2_DIR); ++ tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15)); ++ au_writel (tmp, GPIO2_DIR); ++} ++ ++static void mtx1_enable_wd (void) ++{ ++ au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR); ++} ++ ++static void mtx1_disable_wd (void) ++{ ++ au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR); ++} ++ ++ ++//---------[ Timer Functions ]----------------- ++ ++static struct timer_list wd_trigger_timer; ++static char timer_is_running = FALSE; ++ ++static void wd_timer_callback (unsigned long data) ++{ ++ if (timer_is_running) ++ mod_timer (&wd_trigger_timer, jiffies + 5 * HZ); ++ mtx1_trigger_wd(); ++} ++ ++static void start_wd_timer (void) ++{ ++ if (!timer_is_running) { ++ struct timer_list *t = &wd_trigger_timer; ++ ++ init_timer (t); ++ t->function = wd_timer_callback; ++ t->data = (unsigned long)0L; ++ t->expires = jiffies + 5 * HZ; // 5 seconds. ++ add_timer (t); ++ timer_is_running = TRUE; ++ } ++} ++ ++ ++ ++static void stop_wd_timer (void) ++{ ++ if (timer_is_running) { ++ del_timer(&wd_trigger_timer); ++ timer_is_running = FALSE; ++ } ++} ++ ++ ++//---------[ File Functions ]----------------- ++ ++static char restart_after_close; ++ ++static int mtx1wd_open (struct inode *inode, struct file *file) ++{ ++ if (MINOR(inode->i_rdev) != WATCHDOG_MINOR) return -ENODEV; ++ //MOD_INC_USE_COUNT; ++ ++ // stop the timer, if it is running. It will not be ++ // started again, until the module is loaded again. ++ stop_wd_timer(); ++ ++ // sleep for 2 seconds, to ensure, that the wd is ++ // not triggered more often than every 2 seconds. ++ schedule_timeout (2 * HZ); ++ ++ return 0; ++} ++ ++ ++static int mtx1wd_release (struct inode *inode, struct file *file) { ++ if (MINOR(inode->i_rdev)==WATCHDOG_MINOR) { ++ } ++ if (restart_after_close) ++ start_wd_timer(); ++ //MOD_DEC_USE_COUNT; ++ return 0; ++} ++ ++ ++static ssize_t mtx1wd_write (struct file *file, const char *buf, size_t count, loff_t *ppos) { ++ ++ mtx1_trigger_wd (); ++ ++ if (count > 0) { ++ char buffer[10]; ++ int n = (count>9)?9:count; ++ ++ if (copy_from_user (&buffer, buf, n)) ++ return -EFAULT; ++ buffer[n]=0; ++ ++ if (count >= 4 && strncmp("auto", buffer, 4)==0) ++ restart_after_close = 1; ++ ++ else if (count >= 6 && strncmp("manual", buffer, 6)==0) ++ restart_after_close = 0; ++ ++ return n; ++ } ++ ++ return 0; ++} ++ ++static ssize_t mtx1wd_read (struct file *file, char *buf, size_t count, loff_t *ppos) ++{ ++ char * state = restart_after_close ? "auto\n" : "manual\n"; ++ int n = strlen(state)+1; ++ ++ if (file->f_pos >= n) ++ return 0; ++ ++ if (count < n) ++ return -EINVAL; ++ ++ if(copy_to_user(buf, state, n)) ++ return -EFAULT; ++ ++ file->f_pos += n; ++ ++ return n; ++} ++ ++static struct file_operations mtx1wd_fops = { ++ .owner = THIS_MODULE, ++ .read = mtx1wd_read, ++ .write = mtx1wd_write, ++ .open = mtx1wd_open, ++ .release = mtx1wd_release ++}; ++ ++ ++static struct miscdevice mtx1wd_miscdev = { ++ WATCHDOG_MINOR, ++ "watchdog", ++ &mtx1wd_fops ++}; ++ ++ ++ ++//---------[ Module Functions ]----------------- ++ ++ ++static int __init init_mtx1_watchdog(void) ++{ ++ printk("MTX-1 watchdog driver\n"); ++ ++ misc_register(&mtx1wd_miscdev); ++ ++ restart_after_close = 0; ++ ++ mtx1_enable_wd (); ++ ++ //-- trigger it for the first time. ++ //-- We do not exactly know how long it has not been triggered. ++ mtx1_trigger_wd (); ++ ++ // start a timer, that calls mtx1_trigger_wd every 5 seconds. ++ start_wd_timer(); ++ ++ return 0; ++} ++ ++static void __exit exit_mtx1_watchdog(void) { ++ ++ // stop the timer, if it is running. ++ stop_wd_timer(); ++ ++ misc_deregister(&mtx1wd_miscdev); ++ ++ mtx1_disable_wd(); ++} ++ ++module_init(init_mtx1_watchdog); ++module_exit(exit_mtx1_watchdog); ++ ++MODULE_AUTHOR("Michael Stickel"); ++MODULE_DESCRIPTION("Driver for the MTX-1 watchdog"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch b/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch new file mode 100644 index 0000000..946bd84 --- /dev/null +++ b/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch @@ -0,0 +1,24 @@ +diff -urN linux-2.6.16.7/drivers/net/au1000_eth.c linux-2.6.16.7.new/drivers/net/au1000_eth.c +--- linux-2.6.16.7/drivers/net/au1000_eth.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/net/au1000_eth.c 2006-04-23 01:42:48.000000000 +0200 +@@ -12,6 +12,9 @@ + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * ++ * Bjoern Riemer 2004 ++ * riemer@fokus.fraunhofer.de or riemer@riemer-nt.de ++ * // fixed the link beat detection with ioctls (SIOCGMIIPHY) + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it +@@ -1672,6 +1675,10 @@ + aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed); + control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE; + #ifndef CONFIG_CPU_LITTLE_ENDIAN ++ /*riemer: fix for startup without cable */ ++ if (!link) ++ dev->flags &= ~IFF_RUNNING; ++ + control |= MAC_BIG_ENDIAN; + #endif + if (link && (dev->if_port == IF_PORT_100BASEFX)) { diff --git a/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch b/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch new file mode 100644 index 0000000..511df2c --- /dev/null +++ b/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch @@ -0,0 +1,241 @@ +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 11:54:31.000000000 +0200 +@@ -64,6 +64,7 @@ + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, ++ { AU1500_GPIO_207, INTC_INT_RISE_AND_FALL_EDGE, 0 }, + }; + + int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile 2006-04-23 14:01:36.000000000 +0200 +@@ -8,3 +8,4 @@ + # + + lib-y := init.o board_setup.o irqmap.o ++obj-y := mtx-1_sysbtn.o +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 2006-04-23 14:01:17.000000000 +0200 +@@ -0,0 +1,218 @@ ++/* ++ * Driver for the MTX-1 System Button. ++ * ++ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved. ++ * http://www.4g-systems.biz ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * Neither Michael Stickel nor 4G Systeme GmbH admit liability nor provide ++ * warranty for any of this software. This material is provided ++ * "AS-IS" and at no charge. ++ * ++ * (c) Copyright 2005 4G Systems <info@4g-systems.biz> ++ * ++ * Release 0.01. ++ * ++ * Author: Michael Stickel michael.stickel@4g-systems.biz ++ * ++ * ++ * After the module is loaded there is a device /dev/misc/btn ++ * that can be read. It returns one char '1' if the button ++ * has been pressed an '0' if it has been released. ++ */ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/kernel.h> ++#include <linux/poll.h> ++#include <linux/sched.h> ++#include <linux/miscdevice.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++#include <linux/interrupt.h> ++ ++#include <asm/uaccess.h> ++ ++#include <asm/mach-au1x00/au1000.h> ++ ++ ++#ifndef FALSE ++# define FALSE (0) ++#endif ++ ++#ifndef TRUE ++# define TRUE (!FALSE) ++#endif ++ ++ ++//---------[ declarations ]----------------- ++ ++ ++static DECLARE_WAIT_QUEUE_HEAD(mtx1btn_wait_queue); ++static char state_changed; ++static char last_value; ++static char is_inuse; ++ ++ ++//---------[ Hardware Functions ]----------------- ++ ++// The MTX-1 Button is attached to GPIO207. ++#define MTX1_GPIO2_SYSBTN (7) ++#define MTX1_SYSBTN_IRQ (AU1500_GPIO_207) ++ ++ ++static char mtx1_getbtn (int btnno) ++{ ++ if (btnno==0) { ++ return (au_readl(GPIO2_PINSTATE) & (1<<MTX1_GPIO2_SYSBTN)) ? 0 : 1; ++ } ++ return 0; ++} ++ ++static void mtx1_initbuttons (void) ++{ ++ au_writel (au_readl(GPIO2_DIR) & ~(1<<MTX1_GPIO2_SYSBTN), GPIO2_DIR); ++} ++ ++ ++//---------[ Interrupt handling ]----------------- ++ ++ ++static void mtx1_btn_interrupt (int irq, void *private, struct pt_regs *regs) ++{ ++ char value = mtx1_getbtn(0); ++ if (last_value != value) ++ { ++ last_value = value; ++ state_changed = 1; ++ wake_up (&mtx1btn_wait_queue); ++ } ++// kill_fasync(&async_queue, SIGIO, POLL_OUT); ++} ++ ++ ++static int mtx1_btn_startirq (void) ++{ ++ if (!request_irq (MTX1_SYSBTN_IRQ, mtx1_btn_interrupt, 0 /* | SA_INTERRUPT */, "mtx1btn", (void *)&state_changed)) { ++ return 0; ++ } ++ return -1; ++} ++ ++static int mtx1_btn_stopirq (void) ++{ ++ free_irq(MTX1_SYSBTN_IRQ, (void *)&state_changed); ++ return 0; ++} ++ ++ ++ ++//---------[ File Functions ]----------------- ++ ++ ++static int mtx1sysbtn_minor = -1; ++ ++ ++static int mtx1sysbtn_open (struct inode *inode, struct file *file) ++{ ++ if (MINOR(inode->i_rdev)!=mtx1sysbtn_minor) return -ENODEV; ++ if (is_inuse) return -EBUSY; ++ is_inuse=1; ++ last_value = mtx1_getbtn(0); ++ state_changed = 0; ++ return 0; ++} ++ ++ ++static int mtx1sysbtn_release (struct inode *inode, struct file *file) { ++ if (MINOR(inode->i_rdev)==mtx1sysbtn_minor) { ++ is_inuse=0; ++ } ++ return 0; ++} ++ ++ ++static ssize_t mtx1sysbtn_read (struct file *file, char *buf, size_t count, loff_t *ppos) ++{ ++ if (count < 1) ++ return -EINVAL; ++ if (!state_changed) ++ interruptible_sleep_on (&mtx1btn_wait_queue); ++ state_changed = 0; ++ char c = last_value ? '1' : '0'; /* mtx1_getbtn(0) */ ++ if(copy_to_user(buf, &c, 1)) ++ return -EFAULT; ++ return 1; ++} ++ ++ ++static unsigned int mtx1sysbtn_poll (struct file *file, poll_table * wait) ++{ ++ unsigned int mask = 0; ++ ++ poll_wait (file, &mtx1btn_wait_queue, wait); ++ ++ if (state_changed) // state changed since last time. ++ mask |= POLLIN | POLLRDNORM; ++ ++ return mask; ++} ++ ++ ++static struct file_operations mtx1sysbtn_fops = { ++ .owner = THIS_MODULE, ++ .read = mtx1sysbtn_read, ++ .poll = mtx1sysbtn_poll, ++ .open = mtx1sysbtn_open, ++ .release = mtx1sysbtn_release ++}; ++ ++ ++static struct miscdevice mtx1sysbtn_miscdev = { ++ MISC_DYNAMIC_MINOR /* SYSBTN_MINOR */ , ++ "btn", ++ &mtx1sysbtn_fops ++}; ++ ++ ++ ++//---------[ Module Functions ]----------------- ++ ++ ++void __exit exit_mtx1_sysbtn (void) ++{ ++ is_inuse = 1; ++ mtx1_btn_stopirq (); ++ misc_deregister(&mtx1sysbtn_miscdev); ++} ++ ++ ++static int __init init_mtx1_sysbtn (void) ++{ ++ printk("MTX-1 System Button driver\n"); ++ is_inuse = 1; ++ mtx1_initbuttons (); ++ if (misc_register (&mtx1sysbtn_miscdev) >= 0) { ++ mtx1sysbtn_minor = mtx1sysbtn_miscdev.minor; ++ if (mtx1_btn_startirq () == 0) { ++ is_inuse=0; ++ return 0; ++ } ++ misc_deregister(&mtx1sysbtn_miscdev); ++ } ++ return 1; ++} ++ ++module_init(init_mtx1_sysbtn); ++module_exit(exit_mtx1_sysbtn); ++ ++MODULE_AUTHOR("Michael Stickel"); ++MODULE_DESCRIPTION("Driver for the MTX-1 system button"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch b/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch new file mode 100644 index 0000000..34d1005 --- /dev/null +++ b/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch @@ -0,0 +1,13 @@ +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:35:42.000000000 +0200 +@@ -71,9 +71,7 @@ + #endif + + // initialize sys_pinfunc: +- // disable second ethernet port (SYS_PF_NI2) +- // set U3/GPIO23 to GPIO23 (SYS_PF_U3) +- au_writel( SYS_PF_NI2 | SYS_PF_U3, SYS_PINFUNC ); ++ au_writel( SYS_PF_NI2, SYS_PINFUNC ); + + // initialize GPIO + au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR ); diff --git a/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch b/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch new file mode 100644 index 0000000..9e54ac1 --- /dev/null +++ b/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch @@ -0,0 +1,63 @@ +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:39:21.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:39:03.000000000 +0200 +@@ -44,6 +44,9 @@ + #include <asm/pgtable.h> + #include <asm/mach-au1x00/au1000.h> + ++extern int (*board_pci_idsel)(unsigned int devsel, int assert); ++int mtx1_pci_idsel(unsigned int devsel, int assert); ++ + void board_reset (void) + { + /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ +@@ -77,11 +80,37 @@ + au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR ); + au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF + au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF ++ au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON + au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF + + // enable LED and set it to green + au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR ); + au_writel( 0x18000800, GPIO2_OUTPUT ); + ++ board_pci_idsel = mtx1_pci_idsel; ++ + printk("4G Systems MTX-1 Board\n"); + } ++ ++int ++mtx1_pci_idsel(unsigned int devsel, int assert) ++{ ++#define MTX_IDSEL_ONLY_0_AND_3 0 ++#if MTX_IDSEL_ONLY_0_AND_3 ++ if (devsel != 0 && devsel != 3) { ++ printk("*** not 0 or 3\n"); ++ return 0; ++ } ++#endif ++ ++ if (assert && devsel != 0) { ++ // supress signal to cardbus ++ au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF ++ } ++ else { ++ au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON ++ } ++ au_sync_udelay(1); ++ return 1; ++} ++ +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 14:40:54.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 14:40:12.000000000 +0200 +@@ -48,7 +48,7 @@ + #include <asm/mach-au1x00/au1000.h> + + char irq_tab_alchemy[][5] __initdata = { +- [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ ++ [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ |