diff options
Diffstat (limited to 'target/linux/brcm-2.4/base-files/etc/init.d/netconfig')
-rwxr-xr-x | target/linux/brcm-2.4/base-files/etc/init.d/netconfig | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig new file mode 100755 index 0000000..fe39f50 --- /dev/null +++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig @@ -0,0 +1,98 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006 OpenWrt.org + +START=05 + +start() { + [ -e /etc/config/network ] && exit 0 + + mkdir -p /etc/config + + ( + if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then + # WGT634u + echo boardtype=wgt634u + else + strings /dev/mtdblock/3 + fi + ) | awk ' + function p(cfgname, name) { + if (c[name] != "") print " option " cfgname " \"" c[name] "\"" + } + + BEGIN { + FS="=" + c["lan_ifname"]="eth0.0" + c["wan_ifname"]="eth0.1" + c["vlan0ports"]="1 2 3 4 5*" + c["vlan1ports"]="0 5" + } + + ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") { + nvram[$1] = $2 + } + + END { + # v1 hardware + if (nvram["boardtype"] == "bcm94710dev") { + # Asus WL-500g + if (nvram["boardnum"] == "asusX") { + c["lan_ifname"]="eth0 eth1" # FIXME + c["wan_ifname"]="" + } + } + if (nvram["boardtype"] == "bcm94710r4") { + # Toshiba WRC-1000 + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + } + if (nvram["boardtype"] == "wgt634u") { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } + if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) { + if (nvram["boardnum"] == "45") { + c["vlan0ports"] = "1 2 3 4 5*" + c["vlan1ports"] = "0 5" + } else { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } + } + + # WAP54G + if ((nvram["boardnum"] == "2") || \ + (nvram["boardnum"] == "1024")) { + c["lan_ifname"]="eth0" + c["wan_ifname"]="" + } + + print "#### VLAN configuration " + print "config switch eth0" + p("vlan0", "vlan0ports") + p("vlan1", "vlan1ports") + print "" + print "" + print "#### Loopback configuration" + print "config interface loopback" + print " option ifname \"lo\"" + print " option proto static" + print " option ipaddr 127.0.0.1" + print " option netmask 255.0.0.0" + print "" + print "" + print "#### LAN configuration" + print "config interface lan" + print " option type bridge" + p("ifname", "lan_ifname") + print " option proto static" + print " option ipaddr 192.168.1.1" + print " option netmask 255.255.255.0" + print "" + print "" + print "#### WAN configuration" + print "config interface wan" + p("ifname", "wan_ifname") + print " option proto dhcp" + }' > /etc/config/network +} |