diff options
Diffstat (limited to 'target/linux/brcm-2.6/patches/001-bcm947xx.patch')
| -rw-r--r-- | target/linux/brcm-2.6/patches/001-bcm947xx.patch | 11862 |
1 files changed, 11862 insertions, 0 deletions
diff --git a/target/linux/brcm-2.6/patches/001-bcm947xx.patch b/target/linux/brcm-2.6/patches/001-bcm947xx.patch new file mode 100644 index 0000000..be3ac94 --- /dev/null +++ b/target/linux/brcm-2.6/patches/001-bcm947xx.patch @@ -0,0 +1,11862 @@ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/bcmsrom.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/bcmsrom.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,481 @@ ++/* ++ * Misc useful routines to access NIC SROM/OTP . ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <bcmutils.h> ++#include <bcmsrom.h> ++#include <bcmdevs.h> ++#include <bcmendian.h> ++#include <pcicfg.h> ++#include <sbutils.h> ++ ++#include <proto/ethernet.h> /* for sprom content groking */ ++ ++#define VARS_MAX 4096 /* should be reduced */ ++ ++#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */ ++#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */ ++ ++static int initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count); ++static int sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc); ++ ++static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count); ++ ++/* ++ * Initialize local vars from the right source for this platform. ++ * Return 0 on success, nonzero on error. ++ */ ++int ++srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, int *count) ++{ ++ ASSERT(bustype == BUSTYPE(bustype)); ++ if (vars == NULL || count == NULL) ++ return (0); ++ ++ switch (BUSTYPE(bustype)) { ++ ++ case PCI_BUS: ++ ASSERT(curmap); /* can not be NULL */ ++ return initvars_srom_pci(sbh, curmap, vars, count); ++ ++ default: ++ return 0; ++ } ++ return (-1); ++} ++ ++/* support only 16-bit word read from srom */ ++int ++srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) ++{ ++ void *srom; ++ uint off, nw; ++ ++ ASSERT(bustype == BUSTYPE(bustype)); ++ ++ /* check input - 16-bit access only */ ++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) ++ return 1; ++ ++ off = byteoff / 2; ++ nw = nbytes / 2; ++ ++ if (BUSTYPE(bustype) == PCI_BUS) { ++ if (!curmap) ++ return 1; ++ srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET; ++ if (sprom_read_pci(srom, off, buf, nw, FALSE)) ++ return 1; ++ } else { ++ return 1; ++ } ++ ++ return 0; ++} ++ ++/* support only 16-bit word write into srom */ ++int ++srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) ++{ ++ uint16 *srom; ++ uint i, off, nw, crc_range; ++ uint16 image[SPROM_SIZE], *p; ++ uint8 crc; ++ volatile uint32 val32; ++ ++ ASSERT(bustype == BUSTYPE(bustype)); ++ ++ /* check input - 16-bit access only */ ++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) ++ return 1; ++ ++ crc_range = (((BUSTYPE(bustype) == SDIO_BUS)) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; ++ ++ /* if changes made inside crc cover range */ ++ if (byteoff < crc_range) { ++ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2; ++ /* read data including entire first 64 words from srom */ ++ if (srom_read(bustype, curmap, osh, 0, nw * 2, image)) ++ return 1; ++ /* make changes */ ++ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); ++ /* calculate crc */ ++ htol16_buf(image, crc_range); ++ crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); ++ ltoh16_buf(image, crc_range); ++ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); ++ p = image; ++ off = 0; ++ } else { ++ p = buf; ++ off = byteoff / 2; ++ nw = nbytes / 2; ++ } ++ ++ if (BUSTYPE(bustype) == PCI_BUS) { ++ srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET); ++ /* enable writes to the SPROM */ ++ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); ++ val32 |= SPROM_WRITEEN; ++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); ++ bcm_mdelay(WRITE_ENABLE_DELAY); ++ /* write srom */ ++ for (i = 0; i < nw; i++) { ++ W_REG(&srom[off + i], p[i]); ++ bcm_mdelay(WRITE_WORD_DELAY); ++ } ++ /* disable writes to the SPROM */ ++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN); ++ } else { ++ return 1; ++ } ++ ++ bcm_mdelay(WRITE_ENABLE_DELAY); ++ return 0; ++} ++ ++ ++/* ++ * Read in and validate sprom. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc) ++{ ++ int err = 0; ++ uint i; ++ ++ /* read the sprom */ ++ for (i = 0; i < nwords; i++) ++ buf[i] = R_REG(&sprom[wordoff + i]); ++ ++ if (check_crc) { ++ /* fixup the endianness so crc8 will pass */ ++ htol16_buf(buf, nwords * 2); ++ if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE) ++ err = 1; ++ /* now correct the endianness of the byte array */ ++ ltoh16_buf(buf, nwords * 2); ++ } ++ ++ return err; ++} ++ ++/* ++* Create variable table from memory. ++* Return 0 on success, nonzero on error. ++*/ ++static int ++initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count) ++{ ++ int c = (int)(end - start); ++ ++ /* do it only when there is more than just the null string */ ++ if (c > 1) { ++ char *vp = MALLOC(osh, c); ++ ASSERT(vp); ++ if (!vp) ++ return BCME_NOMEM; ++ bcopy(start, vp, c); ++ *vars = vp; ++ *count = c; ++ } ++ else { ++ *vars = NULL; ++ *count = 0; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Initialize nonvolatile variable table from sprom. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count) ++{ ++ uint16 w, b[64]; ++ uint8 sromrev; ++ struct ether_addr ea; ++ char eabuf[32]; ++ uint32 w32; ++ int woff, i; ++ char *vp, *base; ++ osl_t *osh = sb_osh(sbh); ++ int err; ++ ++ /* ++ * Apply CRC over SROM content regardless SROM is present or not, ++ * and use variable <devpath>sromrev's existance in flash to decide ++ * if we should return an error when CRC fails or read SROM variables ++ * from flash. ++ */ ++ sprom_read_pci((void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof(b)/sizeof(b[0]), TRUE); ++ ++ /* top word of sprom contains version and crc8 */ ++ sromrev = b[63] & 0xff; ++ /* bcm4401 sroms misprogrammed */ ++ if (sromrev == 0x10) ++ sromrev = 1; ++ ++ /* srom version check */ ++ if (sromrev > 3) ++ return (-2); ++ ++ ASSERT(vars); ++ ASSERT(count); ++ ++ base = vp = MALLOC(osh, VARS_MAX); ++ ASSERT(vp); ++ if (!vp) ++ return -2; ++ ++ vp += sprintf(vp, "sromrev=%d", sromrev); ++ vp++; ++ ++ if (sromrev >= 3) { ++ /* New section takes over the 3th hardware function space */ ++ ++ /* Words 22+23 are 11a (mid) ofdm power offsets */ ++ w32 = ((uint32)b[23] << 16) | b[22]; ++ vp += sprintf(vp, "ofdmapo=%d", w32); ++ vp++; ++ ++ /* Words 24+25 are 11a (low) ofdm power offsets */ ++ w32 = ((uint32)b[25] << 16) | b[24]; ++ vp += sprintf(vp, "ofdmalpo=%d", w32); ++ vp++; ++ ++ /* Words 26+27 are 11a (high) ofdm power offsets */ ++ w32 = ((uint32)b[27] << 16) | b[26]; ++ vp += sprintf(vp, "ofdmahpo=%d", w32); ++ vp++; ++ ++ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/ ++ w32 = ((uint32)b[43] << 24) | ((uint32)b[42] << 8); ++ vp += sprintf(vp, "gpiotimerval=%d", w32); ++ ++ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/ ++ w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xFF) << 24) | /* oncount*/ ++ ((uint32)((unsigned char)(b[21] & 0xFF)) << 8); /* offcount */ ++ vp += sprintf(vp, "gpiotimerval=%d", w32); ++ ++ vp++; ++ } ++ ++ if (sromrev >= 2) { ++ /* New section takes over the 4th hardware function space */ ++ ++ /* Word 29 is max power 11a high/low */ ++ w = b[29]; ++ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); ++ vp++; ++ ++ /* Words 30-32 set the 11alow pa settings, ++ * 33-35 are the 11ahigh ones. ++ */ ++ for (i = 0; i < 3; i++) { ++ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); ++ vp++; ++ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); ++ vp++; ++ } ++ w = b[59]; ++ if (w == 0) ++ vp += sprintf(vp, "ccode="); ++ else ++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); ++ vp++; ++ ++ } ++ ++ /* parameter section of sprom starts at byte offset 72 */ ++ woff = 72/2; ++ ++ /* first 6 bytes are il0macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "il0macaddr=%s", eabuf); ++ vp++; ++ ++ /* next 6 bytes are et0macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "et0macaddr=%s", eabuf); ++ vp++; ++ ++ /* next 6 bytes are et1macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "et1macaddr=%s", eabuf); ++ vp++; ++ ++ /* ++ * Enet phy settings one or two singles or a dual ++ * Bits 4-0 : MII address for enet0 (0x1f for not there) ++ * Bits 9-5 : MII address for enet1 (0x1f for not there) ++ * Bit 14 : Mdio for enet0 ++ * Bit 15 : Mdio for enet1 ++ */ ++ w = b[woff]; ++ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); ++ vp++; ++ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); ++ vp++; ++ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); ++ vp++; ++ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); ++ vp++; ++ ++ /* Word 46 has board rev, antennas 0/1 & Country code/control */ ++ w = b[46]; ++ vp += sprintf(vp, "boardrev=%d", w & 0xff); ++ vp++; ++ ++ if (sromrev > 1) ++ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); ++ else ++ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); ++ vp++; ++ ++ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3); ++ vp++; ++ ++ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3); ++ vp++; ++ ++ /* Words 47-49 set the (wl) pa settings */ ++ woff = 47; ++ ++ for (i = 0; i < 3; i++) { ++ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); ++ vp++; ++ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); ++ vp++; ++ } ++ ++ /* ++ * Words 50-51 set the customer-configured wl led behavior. ++ * 8 bits/gpio pin. High bit: activehi=0, activelo=1; ++ * LED behavior values defined in wlioctl.h . ++ */ ++ w = b[50]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* gpio0 */ ++ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff)); ++ vp++; ++ ++ /* gpio1 */ ++ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ w = b[51]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* gpio2 */ ++ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff); ++ vp++; ++ ++ /* gpio3 */ ++ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ ++ /* Word 52 is max power 0/1 */ ++ w = b[52]; ++ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); ++ vp++; ++ ++ /* Word 56 is idle tssi target 0/1 */ ++ w = b[56]; ++ vp += sprintf(vp, "pa0itssit=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); ++ vp++; ++ ++ /* Word 57 is boardflags, if not programmed make it zero */ ++ w32 = (uint32)b[57]; ++ if (w32 == 0xffff) w32 = 0; ++ if (sromrev > 1) { ++ /* Word 28 is the high bits of boardflags */ ++ w32 |= (uint32)b[28] << 16; ++ } ++ vp += sprintf(vp, "boardflags=%d", w32); ++ vp++; ++ ++ /* Word 58 is antenna gain 0/1 */ ++ w = b[58]; ++ vp += sprintf(vp, "ag0=%d", w & 0xff); ++ vp++; ++ ++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); ++ vp++; ++ ++ if (sromrev == 1) { ++ /* set the oem string */ ++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", ++ ((b[59] >> 8) & 0xff), (b[59] & 0xff), ++ ((b[60] >> 8) & 0xff), (b[60] & 0xff), ++ ((b[61] >> 8) & 0xff), (b[61] & 0xff), ++ ((b[62] >> 8) & 0xff), (b[62] & 0xff)); ++ vp++; ++ } else if (sromrev == 2) { ++ /* Word 60 OFDM tx power offset from CCK level */ ++ /* OFDM Power Offset - opo */ ++ vp += sprintf(vp, "opo=%d", b[60] & 0xff); ++ vp++; ++ } else { ++ /* Word 60: cck power offsets */ ++ vp += sprintf(vp, "cckpo=%d", b[60]); ++ vp++; ++ ++ /* Words 61+62: 11g ofdm power offsets */ ++ w32 = ((uint32)b[62] << 16) | b[61]; ++ vp += sprintf(vp, "ofdmgpo=%d", w32); ++ vp++; ++ } ++ ++ /* final nullbyte terminator */ ++ *vp++ = '\0'; ++ ++ ASSERT((vp - base) <= VARS_MAX); ++ ++ err = initvars_table(osh, base, vp, vars, count); ++ ++ MFREE(osh, base, VARS_MAX); ++ return err; ++} ++ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/bcmutils.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/bcmutils.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,356 @@ ++/* ++ * Misc useful OS-independent routines. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <sbutils.h> ++#include <bcmnvram.h> ++#include <bcmutils.h> ++#include <bcmendian.h> ++#include <bcmdevs.h> ++ ++unsigned char bcm_ctype[] = { ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ ++ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */ ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ ++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ ++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ ++ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ ++ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ ++ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ ++ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ ++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ ++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ ++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */ ++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */ ++}; ++ ++uchar ++bcm_toupper(uchar c) ++{ ++ if (bcm_islower(c)) ++ c -= 'a'-'A'; ++ return (c); ++} ++ ++ulong ++bcm_strtoul(char *cp, char **endp, uint base) ++{ ++ ulong result, value; ++ bool minus; ++ ++ minus = FALSE; ++ ++ while (bcm_isspace(*cp)) ++ cp++; ++ ++ if (cp[0] == '+') ++ cp++; ++ else if (cp[0] == '-') { ++ minus = TRUE; ++ cp++; ++ } ++ ++ if (base == 0) { ++ if (cp[0] == '0') { ++ if ((cp[1] == 'x') || (cp[1] == 'X')) { ++ base = 16; ++ cp = &cp[2]; ++ } else { ++ base = 8; ++ cp = &cp[1]; ++ } ++ } else ++ base = 10; ++ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { ++ cp = &cp[2]; ++ } ++ ++ result = 0; ++ ++ while (bcm_isxdigit(*cp) && ++ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { ++ result = result*base + value; ++ cp++; ++ } ++ ++ if (minus) ++ result = (ulong)(result * -1); ++ ++ if (endp) ++ *endp = (char *)cp; ++ ++ return (result); ++} ++ ++uint ++bcm_atoi(char *s) ++{ ++ uint n; ++ ++ n = 0; ++ ++ while (bcm_isdigit(*s)) ++ n = (n * 10) + *s++ - '0'; ++ return (n); ++} ++ ++/* return pointer to location of substring 'needle' in 'haystack' */ ++char* ++bcmstrstr(char *haystack, char *needle) ++{ ++ int len, nlen; ++ int i; ++ ++ if ((haystack == NULL) || (needle == NULL)) ++ return (haystack); ++ ++ nlen = strlen(needle); ++ len = strlen(haystack) - nlen + 1; ++ ++ for (i = 0; i < len; i++) ++ if (bcmp(needle, &haystack[i], nlen) == 0) ++ return (&haystack[i]); ++ return (NULL); ++} ++ ++char* ++bcmstrcat(char *dest, const char *src) ++{ ++ strcpy(&dest[strlen(dest)], src); ++ return (dest); ++} ++ ++ ++char* ++bcm_ether_ntoa(char *ea, char *buf) ++{ ++ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x", ++ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff, ++ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff); ++ return (buf); ++} ++ ++/* parse a xx:xx:xx:xx:xx:xx format ethernet address */ ++int ++bcm_ether_atoe(char *p, char *ea) ++{ ++ int i = 0; ++ ++ for (;;) { ++ ea[i++] = (char) bcm_strtoul(p, &p, 16); ++ if (!*p++ || i == 6) ++ break; ++ } ++ ++ return (i == 6); ++} ++ ++void ++bcm_mdelay(uint ms) ++{ ++ uint i; ++ ++ for (i = 0; i < ms; i++) { ++ OSL_DELAY(1000); ++ } ++} ++ ++/* ++ * Search the name=value vars for a specific one and return its value. ++ * Returns NULL if not found. ++ */ ++char* ++getvar(char *vars, char *name) ++{ ++ char *s; ++ int len; ++ ++ len = strlen(name); ++ ++ /* first look in vars[] */ ++ for (s = vars; s && *s; ) { ++ if ((bcmp(s, name, len) == 0) && (s[len] == '=')) ++ return (&s[len+1]); ++ ++ while (*s++) ++ ; ++ } ++ ++ /* then query nvram */ ++ return (BCMINIT(nvram_get)(name)); ++} ++ ++/* ++ * Search the vars for a specific one and return its value as ++ * an integer. Returns 0 if not found. ++ */ ++int ++getintvar(char *vars, char *name) ++{ ++ char *val; ++ ++ if ((val = getvar(vars, name)) == NULL) ++ return (0); ++ ++ return (bcm_strtoul(val, NULL, 0)); ++} ++ ++ ++/* Search for token in comma separated token-string */ ++static int ++findmatch(char *string, char *name) ++{ ++ uint len; ++ char *c; ++ ++ len = strlen(name); ++ while ((c = strchr(string, ',')) != NULL) { ++ if (len == (uint)(c - string) && !strncmp(string, name, len)) ++ return 1; ++ string = c + 1; ++ } ++ ++ return (!strcmp(string, name)); ++} ++ ++/* Return gpio pin number assigned to the named pin */ ++/* ++* Variable should be in format: ++* ++* gpio<N>=pin_name,pin_name ++* ++* This format allows multiple features to share the gpio with mutual ++* understanding. ++* ++* 'def_pin' is returned if a specific gpio is not defined for the requested functionality ++* and if def_pin is not used by others. ++*/ ++uint ++getgpiopin(char *vars, char *pin_name, uint def_pin) ++{ ++ char name[] = "gpioXXXX"; ++ char *val; ++ uint pin; ++ ++ /* Go thru all possibilities till a match in pin name */ ++ for (pin = 0; pin < GPIO_NUMPINS; pin ++) { ++ sprintf(name, "gpio%d", pin); ++ val = getvar(vars, name); ++ if (val && findmatch(val, pin_name)) ++ return pin; ++ } ++ ++ if (def_pin != GPIO_PIN_NOTDEFINED) { ++ /* make sure the default pin is not used by someone else */ ++ sprintf(name, "gpio%d", def_pin); ++ if (getvar(vars, name)) { ++ def_pin = GPIO_PIN_NOTDEFINED; ++ } ++ } ++ ++ return def_pin; ++} ++ ++ ++/******************************************************************************* ++ * crc8 ++ * ++ * Computes a crc8 over the input data using the polynomial: ++ * ++ * x^8 + x^7 +x^6 + x^4 + x^2 + 1 ++ * ++ * The caller provides the initial value (either CRC8_INIT_VALUE ++ * or the previous returned value) to allow for processing of ++ * discontiguous blocks of data. When generating the CRC the ++ * caller is responsible for complementing the final return value ++ * and inserting it into the byte stream. When checking, a final ++ * return value of CRC8_GOOD_VALUE indicates a valid CRC. ++ * ++ * Reference: Dallas Semiconductor Application Note 27 ++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", ++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., ++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt ++ * ++ ******************************************************************************/ ++ ++static uint8 crc8_table[256] = { ++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, ++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, ++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, ++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, ++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, ++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, ++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, ++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, ++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, ++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, ++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, ++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, ++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, ++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, ++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, ++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, ++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, ++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, ++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, ++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, ++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, ++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, ++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, ++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, ++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, ++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, ++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, ++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, ++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, ++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, ++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, ++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F ++}; ++ ++#define CRC_INNER_LOOP(n, c, x) \ ++ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] ++ ++uint8 ++hndcrc8( ++ uint8 *pdata, /* pointer to array of data to process */ ++ uint nbytes, /* number of input data bytes to process */ ++ uint8 crc /* either CRC8_INIT_VALUE or previous return value */ ++) ++{ ++ /* hard code the crc loop instead of using CRC_INNER_LOOP macro ++ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */ ++ while (nbytes-- > 0) ++ crc = crc8_table[(crc ^ *pdata++) & 0xff]; ++ ++ return crc; ++} ++ ++#ifdef notdef ++#define CLEN 1499 ++#define CBUFSIZ (CLEN+4) ++#define CNBUFS 5 ++ ++#endif +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/cfe_env.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/cfe_env.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/cfe_env.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/cfe_env.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,234 @@ ++/* ++ * NVRAM variable manipulation (Linux kernel half) ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <linux/config.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/string.h> ++#include <asm/io.h> ++#include <asm/uaccess.h> ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <bcmendian.h> ++#include <bcmutils.h> ++ ++#define NVRAM_SIZE (0x1ff0) ++static char _nvdata[NVRAM_SIZE] __initdata; ++static char _valuestr[256] __initdata; ++ ++/* ++ * TLV types. These codes are used in the "type-length-value" ++ * encoding of the items stored in the NVRAM device (flash or EEPROM) ++ * ++ * The layout of the flash/nvram is as follows: ++ * ++ * <type> <length> <data ...> <type> <length> <data ...> <type_end> ++ * ++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. ++ * The "length" field marks the length of the data section, not ++ * including the type and length fields. ++ * ++ * Environment variables are stored as follows: ++ * ++ * <type_env> <length> <flags> <name> = <value> ++ * ++ * If bit 0 (low bit) is set, the length is an 8-bit value. ++ * If bit 0 (low bit) is clear, the length is a 16-bit value ++ * ++ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still ++ * indicates the size of the length field. ++ * ++ * Flags are from the constants below: ++ * ++ */ ++#define ENV_LENGTH_16BITS 0x00 /* for low bit */ ++#define ENV_LENGTH_8BITS 0x01 ++ ++#define ENV_TYPE_USER 0x80 ++ ++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) ++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) ++ ++/* ++ * The actual TLV types we support ++ */ ++ ++#define ENV_TLV_TYPE_END 0x00 ++#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) ++ ++/* ++ * Environment variable flags ++ */ ++ ++#define ENV_FLG_NORMAL 0x00 /* normal read/write */ ++#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ ++#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ ++ ++#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ ++#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ ++ ++ ++/* ********************************************************************* ++ * _nvram_read(buffer,offset,length) ++ * ++ * Read data from the NVRAM device ++ * ++ * Input parameters: ++ * buffer - destination buffer ++ * offset - offset of data to read ++ * length - number of bytes to read ++ * ++ * Return value: ++ * number of bytes read, or <0 if error occured ++ ********************************************************************* */ ++static int ++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) ++{ ++ int i; ++ if (offset > NVRAM_SIZE) ++ return -1; ++ ++ for ( i = 0; i < length; i++) { ++ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; ++ } ++ return length; ++} ++ ++ ++static char* ++_strnchr(const char *dest,int c,size_t cnt) ++{ ++ while (*dest && (cnt > 0)) { ++ if (*dest == c) return (char *) dest; ++ dest++; ++ cnt--; ++ } ++ return NULL; ++} ++ ++ ++ ++/* ++ * Core support API: Externally visible. ++ */ ++ ++/* ++ * Get the value of an NVRAM variable ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined ++ */ ++ ++char* ++cfe_env_get(unsigned char *nv_buf, char* name) ++{ ++ int size; ++ unsigned char *buffer; ++ unsigned char *ptr; ++ unsigned char *envval; ++ unsigned int reclen; ++ unsigned int rectype; ++ int offset; ++ int flg; ++ ++ size = NVRAM_SIZE; ++ buffer = &_nvdata[0]; ++ ++ ptr = buffer; ++ offset = 0; ++ ++ /* Read the record type and length */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ ++ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { ++ ++ /* Adjust pointer for TLV type */ ++ rectype = *(ptr); ++ offset++; ++ size--; ++ ++ /* ++ * Read the length. It can be either 1 or 2 bytes ++ * depending on the code ++ */ ++ if (rectype & ENV_LENGTH_8BITS) { ++ /* Read the record type and length - 8 bits */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ reclen = *(ptr); ++ size--; ++ offset++; ++ } ++ else { ++ /* Read the record type and length - 16 bits, MSB first */ ++ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { ++ goto error; ++ } ++ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); ++ size -= 2; ++ offset += 2; ++ } ++ ++ if (reclen > size) ++ break; /* should not happen, bad NVRAM */ ++ ++ switch (rectype) { ++ case ENV_TLV_TYPE_ENV: ++ /* Read the TLV data */ ++ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) ++ goto error; ++ flg = *ptr++; ++ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); ++ if (envval) { ++ *envval++ = '\0'; ++ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); ++ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; ++#if 0 ++ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); ++#endif ++ if(!strcmp(ptr, name)){ ++ return _valuestr; ++ } ++ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) ++ return _valuestr; ++ } ++ break; ++ ++ default: ++ /* Unknown TLV type, skip it. */ ++ break; ++ } ++ ++ /* ++ * Advance to next TLV ++ */ ++ ++ size -= (int)reclen; ++ offset += reclen; ++ ++ /* Read the next record type */ ++ ptr = buffer; ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) ++ goto error; ++ } ++ ++error: ++ return NULL; ++ ++} ++ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/linux_osl.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/linux_osl.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,102 @@ ++/* ++ * Linux OS Independent Layer ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#define LINUX_OSL ++ ++#include <typedefs.h> ++#include <bcmendian.h> ++#include <linux/module.h> ++#include <linuxver.h> ++#include <osl.h> ++#include <bcmutils.h> ++#include <linux/delay.h> ++#ifdef mips ++#include <asm/paccess.h> ++#endif ++#include <pcicfg.h> ++ ++#define PCI_CFG_RETRY 10 ++ ++#define OS_HANDLE_MAGIC 0x1234abcd ++#define BCM_MEM_FILENAME_LEN 24 ++ ++typedef struct bcm_mem_link { ++ struct bcm_mem_link *prev; ++ struct bcm_mem_link *next; ++ uint size; ++ int line; ++ char file[BCM_MEM_FILENAME_LEN]; ++} bcm_mem_link_t; ++ ++struct os_handle { ++ uint magic; ++ void *pdev; ++ uint malloced; ++ uint failed; ++ bcm_mem_link_t *dbgmem_list; ++}; ++ ++uint32 ++osl_pci_read_config(osl_t *osh, uint offset, uint size) ++{ ++ uint val; ++ uint retry=PCI_CFG_RETRY; ++ ++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++ ++ /* only 4byte access supported */ ++ ASSERT(size == 4); ++ ++ do { ++ pci_read_config_dword(osh->pdev, offset, &val); ++ if (val != 0xffffffff) ++ break; ++ } while (retry--); ++ ++ ++ return (val); ++} ++ ++void ++osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val) ++{ ++ uint retry=PCI_CFG_RETRY; ++ ++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++ ++ /* only 4byte access supported */ ++ ASSERT(size == 4); ++ ++ do { ++ pci_write_config_dword(osh->pdev, offset, val); ++ if (offset!=PCI_BAR0_WIN) ++ break; ++ if (osl_pci_read_config(osh,offset,size) == val) ++ break; ++ } while (retry--); ++ ++} ++ ++void ++osl_delay(uint usec) ++{ ++ uint d; ++ ++ while (usec > 0) { ++ d = MIN(usec, 1000); ++ udelay(d); ++ usec -= d; ++ } ++} ++ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/Makefile +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/Makefile 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,6 @@ ++# ++# Makefile for the BCM47xx specific kernel interface routines ++# under Linux. ++# ++ ++obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o sflash.o nvram.o cfe_env.o +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/nvram.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/nvram.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/nvram.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/nvram.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,192 @@ ++/* ++ * NVRAM variable manipulation (Linux kernel half) ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <linux/config.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/string.h> ++#include <linux/interrupt.h> ++#include <linux/spinlock.h> ++#include <linux/slab.h> ++#include <asm/bootinfo.h> ++#include <asm/addrspace.h> ++#include <asm/io.h> ++#include <asm/uaccess.h> ++ ++#include <typedefs.h> ++#include <bcmendian.h> ++#include <bcmnvram.h> ++#include <bcmutils.h> ++#include <sbconfig.h> ++#include <sbchipc.h> ++#include <sbutils.h> ++#include <sbmips.h> ++#include <sflash.h> ++ ++/* In BSS to minimize text size and page aligned so it can be mmap()-ed */ ++static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE))); ++ ++/* Global SB handle */ ++extern void *sbh; ++extern spinlock_t bcm947xx_sbh_lock; ++static int cfe_env; ++ ++extern char *cfe_env_get(char *nv_buf, const char *name); ++ ++ ++/* Convenience */ ++#define sbh_lock bcm947xx_sbh_lock ++#define KB * 1024 ++#define MB * 1024 * 1024 ++ ++/* Probe for NVRAM header */ ++static void __init ++early_nvram_init(void) ++{ ++ struct nvram_header *header; ++ chipcregs_t *cc; ++ struct sflash *info = NULL; ++ int i; ++ uint32 base, off, lim; ++ u32 *src, *dst; ++ ++ cfe_env = 0; ++ if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) { ++ base = KSEG1ADDR(SB_FLASH2); ++ switch (readl(&cc->capabilities) & CAP_FLASH_MASK) { ++ case PFLASH: ++ lim = SB_FLASH2_SZ; ++ break; ++ ++ case SFLASH_ST: ++ case SFLASH_AT: ++ if ((info = sflash_init(cc)) == NULL) ++ return; ++ lim = info->size; ++ break; ++ ++ case FLASH_NONE: ++ default: ++ return; ++ } ++ } else { ++ /* extif assumed, Stop at 4 MB */ ++ base = KSEG1ADDR(SB_FLASH1); ++ lim = SB_FLASH1_SZ; ++ } ++ ++ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ ++ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000); ++ dst = (u32 *) nvram_buf; ++ if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) { ++ printk("early_nvram_init: WGT634U NVRAM found.\n"); ++ ++ for (i = 0; i < 0x1ff0; i++) { ++ if (*src == 0xFFFFFFFF) ++ break; ++ *dst++ = *src++; ++ } ++ cfe_env = 1; ++ return; ++ } ++ ++ off = FLASH_MIN; ++ while (off <= lim) { ++ /* Windowed flash access */ ++ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ off <<= 1; ++ } ++ ++ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ ++ header = (struct nvram_header *) KSEG1ADDR(base + 4 KB); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ ++ header = (struct nvram_header *) KSEG1ADDR(base + 1 KB); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ ++ return; ++ ++found: ++ src = (u32 *) header; ++ dst = (u32 *) nvram_buf; ++ for (i = 0; i < sizeof(struct nvram_header); i += 4) ++ *dst++ = *src++; ++ for (; i < header->len && i < NVRAM_SPACE; i += 4) ++ *dst++ = ltoh32(*src++); ++} ++ ++/* Early (before mm or mtd) read-only access to NVRAM */ ++char * __init early_nvram_get(const char *name) ++{ ++ char *var, *value, *end, *eq; ++ ++ if (!name) ++ return NULL; ++ ++ /* Too early? */ ++ if (sbh == NULL) ++ return NULL; ++ ++ if (!nvram_buf[0]) ++ early_nvram_init(); ++ ++ if (cfe_env) ++ return cfe_env_get(nvram_buf, name); ++ ++ /* Look for name=value and return value */ ++ var = &nvram_buf[sizeof(struct nvram_header)]; ++ end = nvram_buf + sizeof(nvram_buf) - 2; ++ end[0] = end[1] = '\0'; ++ for (; *var; var = value + strlen(value) + 1) { ++ if (!(eq = strchr(var, '='))) ++ break; ++ value = eq + 1; ++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) ++ return value; ++ } ++ ++ return NULL; ++} ++ ++char *nvram_get(const char *name) ++{ ++ char *var, *value, *end, *eq; ++ ++ if (!name) ++ return NULL; ++ ++ if (!nvram_buf[0]) ++ return NULL; ++ ++ /* Look for name=value and return value */ ++ var = &nvram_buf[sizeof(struct nvram_header)]; ++ end = nvram_buf + sizeof(nvram_buf) - 2; ++ end[0] = end[1] = '\0'; ++ for (; *var; var = value + strlen(value) + 1) { ++ if (!(eq = strchr(var, '='))) ++ break; ++ value = eq + 1; ++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) ++ return value; ++ } ++ ++ return NULL; ++} ++ ++EXPORT_SYMBOL(nvram_get); +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/sbmips.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/sbmips.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,1055 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane MIPS core routines ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <sbutils.h> ++#include <bcmdevs.h> ++#include <bcmnvram.h> ++#include <bcmutils.h> ++#include <hndmips.h> ++#include <sbconfig.h> ++#include <sbextif.h> ++#include <sbchipc.h> ++#include <sbmemc.h> ++#include <mipsinc.h> ++#include <sbutils.h> ++ ++/* ++ * Returns TRUE if an external UART exists at the given base ++ * register. ++ */ ++static bool ++BCMINITFN(serial_exists)(uint8 *regs) ++{ ++ uint8 save_mcr, status1; ++ ++ save_mcr = R_REG(®s[UART_MCR]); ++ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a); ++ status1 = R_REG(®s[UART_MSR]) & 0xf0; ++ W_REG(®s[UART_MCR], save_mcr); ++ ++ return (status1 == 0x90); ++} ++ ++/* ++ * Initializes UART access. The callback function will be called once ++ * per found UART. ++ */ ++void ++BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)) ++{ ++ void *regs; ++ ulong base; ++ uint irq; ++ int i, n; ++ ++ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { ++ extifregs_t *eir = (extifregs_t *) regs; ++ sbconfig_t *sb; ++ ++ /* Determine external UART register base */ ++ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); ++ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); ++ ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); ++ ++ /* Disable GPIO interrupt initially */ ++ W_REG(&eir->gpiointpolarity, 0); ++ W_REG(&eir->gpiointmask, 0); ++ ++ /* Search for external UARTs */ ++ n = 2; ++ for (i = 0; i < 2; i++) { ++ regs = (void *) REG_MAP(base + (i * 8), 8); ++ if (BCMINIT(serial_exists)(regs)) { ++ /* Set GPIO 1 to be the external UART IRQ */ ++ W_REG(&eir->gpiointmask, 2); ++ if (add) ++ add(regs, irq, 13500000, 0); ++ } ++ } ++ ++ /* Add internal UART if enabled */ ++ if (R_REG(&eir->corecontrol) & CC_UE) ++ if (add) ++ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); ++ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { ++ chipcregs_t *cc = (chipcregs_t *) regs; ++ uint32 rev, cap, pll, baud_base, div; ++ ++ /* Determine core revision and capabilities */ ++ rev = sb_corerev(sbh); ++ cap = R_REG(&cc->capabilities); ++ pll = cap & CAP_PLL_MASK; ++ ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); ++ ++ if (pll == PLL_TYPE1) { ++ /* PLL clock */ ++ baud_base = sb_clock_rate(pll, ++ R_REG(&cc->clockcontrol_n), ++ R_REG(&cc->clockcontrol_m2)); ++ div = 1; ++ } else { ++ if (rev >= 11) { ++ /* Fixed ALP clock */ ++ baud_base = 20000000; ++ div = 1; ++ /* Set the override bit so we don't divide it */ ++ W_REG(&cc->corecontrol, CC_UARTCLKO); ++ } else if (rev >= 3) { ++ /* Internal backplane clock */ ++ baud_base = sb_clock(sbh); ++ div = 2; /* Minimum divisor */ ++ W_REG(&cc->clkdiv, ++ ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div)); ++ } else { ++ /* Fixed internal backplane clock */ ++ baud_base = 88000000; ++ div = 48; ++ } ++ ++ /* Clock source depends on strapping if UartClkOverride is unset */ ++ if ((rev > 0) && ++ ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) { ++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { ++ /* Internal divided backplane clock */ ++ baud_base /= div; ++ } else { ++ /* Assume external clock of 1.8432 MHz */ ++ baud_base = 1843200; ++ } ++ } ++ } ++ ++ /* Add internal UARTs */ ++ n = cap & CAP_UARTS_MASK; ++ for (i = 0; i < n; i++) { ++ /* Register offset changed after revision 0 */ ++ if (rev) ++ regs = (void *)((ulong) &cc->uart0data + (i * 256)); ++ else ++ regs = (void *)((ulong) &cc->uart0data + (i * 8)); ++ ++ if (add) ++ add(regs, irq, baud_base, 0); ++ } ++ } ++} ++ ++/* ++ * Initialize jtag master and return handle for ++ * jtag_rwreg. Returns NULL on failure. ++ */ ++void * ++sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap) ++{ ++ void *regs; ++ ++ if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) { ++ chipcregs_t *cc = (chipcregs_t *) regs; ++ uint32 tmp; ++ ++ /* ++ * Determine jtagm availability from ++ * core revision and capabilities. ++ */ ++ tmp = sb_corerev(sbh); ++ /* ++ * Corerev 10 has jtagm, but the only chip ++ * with it does not have a mips, and ++ * the layout of the jtagcmd register is ++ * different. We'll only accept >= 11. ++ */ ++ if (tmp < 11) ++ return (NULL); ++ ++ tmp = R_REG(&cc->capabilities); ++ if ((tmp & CAP_JTAGP) == 0) ++ return (NULL); ++ ++ /* Set clock divider if requested */ ++ if (clkd != 0) { ++ tmp = R_REG(&cc->clkdiv); ++ tmp = (tmp & ~CLKD_JTAG) | ++ ((clkd << CLKD_JTAG_SHIFT) & CLKD_JTAG); ++ W_REG(&cc->clkdiv, tmp); ++ } ++ ++ /* Enable jtagm */ ++ tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0); ++ W_REG(&cc->jtagctrl, tmp); ++ } ++ ++ return (regs); ++} ++ ++void ++sb_jtagm_disable(void *h) ++{ ++ chipcregs_t *cc = (chipcregs_t *)h; ++ ++ W_REG(&cc->jtagctrl, R_REG(&cc->jtagctrl) & ~JCTRL_EN); ++} ++ ++/* ++ * Read/write a jtag register. Assumes a target with ++ * 8 bit IR and 32 bit DR. ++ */ ++#define IRWIDTH 8 ++#define DRWIDTH 32 ++uint32 ++jtag_rwreg(void *h, uint32 ir, uint32 dr) ++{ ++ chipcregs_t *cc = (chipcregs_t *) h; ++ uint32 tmp; ++ ++ W_REG(&cc->jtagir, ir); ++ W_REG(&cc->jtagdr, dr); ++ tmp = JCMD_START | JCMD_ACC_IRDR | ++ ((IRWIDTH - 1) << JCMD_IRW_SHIFT) | ++ (DRWIDTH - 1); ++ W_REG(&cc->jtagcmd, tmp); ++ while (((tmp = R_REG(&cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) { ++ /* OSL_DELAY(1); */ ++ } ++ ++ tmp = R_REG(&cc->jtagdr); ++ return (tmp); ++} ++ ++/* Returns the SB interrupt flag of the current core. */ ++uint32 ++sb_flag(sb_t *sbh) ++{ ++ void *regs; ++ sbconfig_t *sb; ++ ++ regs = sb_coreregs(sbh); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK); ++} ++ ++static const uint32 sbips_int_mask[] = { ++ 0, ++ SBIPS_INT1_MASK, ++ SBIPS_INT2_MASK, ++ SBIPS_INT3_MASK, ++ SBIPS_INT4_MASK ++}; ++ ++static const uint32 sbips_int_shift[] = { ++ 0, ++ 0, ++ SBIPS_INT2_SHIFT, ++ SBIPS_INT3_SHIFT, ++ SBIPS_INT4_SHIFT ++}; ++ ++/* ++ * Returns the MIPS IRQ assignment of the current core. If unassigned, ++ * 0 is returned. ++ */ ++uint ++sb_irq(sb_t *sbh) ++{ ++ uint idx; ++ void *regs; ++ sbconfig_t *sb; ++ uint32 flag, sbipsflag; ++ uint irq = 0; ++ ++ flag = sb_flag(sbh); ++ ++ idx = sb_coreidx(sbh); ++ ++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || ++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ ++ sbipsflag = R_REG(&sb->sbipsflag); ++ for (irq = 1; irq <= 4; irq++) { ++ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) ++ break; ++ } ++ if (irq == 5) ++ irq = 0; ++ } ++ ++ sb_setcoreidx(sbh, idx); ++ ++ return irq; ++} ++ ++/* Clears the specified MIPS IRQ. */ ++static void ++BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq) ++{ ++ void *regs; ++ sbconfig_t *sb; ++ ++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(regs); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ if (irq == 0) ++ W_REG(&sb->sbintvec, 0); ++ else ++ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]); ++} ++ ++/* ++ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS ++ * IRQ 0 may be assigned more than once. ++ */ ++static void ++BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit) ++{ ++ void *regs; ++ sbconfig_t *sb; ++ uint32 flag; ++ ++ regs = sb_setcore(sbh, coreid, coreunit); ++ ASSERT(regs); ++ flag = sb_flag(sbh); ++ ++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(regs); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ if (irq == 0) ++ OR_REG(&sb->sbintvec, 1 << flag); ++ else { ++ flag <<= sbips_int_shift[irq]; ++ ASSERT(!(flag & ~sbips_int_mask[irq])); ++ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq]; ++ W_REG(&sb->sbipsflag, flag); ++ } ++} ++ ++/* ++ * Initializes clocks and interrupts. SB and NVRAM access must be ++ * initialized prior to calling. ++ */ ++void ++BCMINITFN(sb_mips_init)(sb_t *sbh) ++{ ++ ulong hz, ns, tmp; ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ char *value; ++ uint irq; ++ ++ /* Figure out current SB clock speed */ ++ if ((hz = sb_clock(sbh)) == 0) ++ hz = 100000000; ++ ns = 1000000000 / hz; ++ ++ /* Setup external interface timing */ ++ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { ++ /* Initialize extif so we can get to the LEDs and external UART */ ++ W_REG(&eir->prog_config, CF_EN); ++ ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ ++ /* Set programmable interface timing for external uart */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ ++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { ++ /* set register for external IO to control LED. */ ++ W_REG(&cc->prog_config, 0x11); ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ ++ tmp = tmp | CEIL(240, ns); /* W0 = 120nS */ ++ W_REG(&cc->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ ++ tmp |= CEIL(120, ns); /* W0 = 120nS */ ++ ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ { ++ W_REG(&cc->flash_waitcount, tmp); ++ W_REG(&cc->pcmcia_memwait, tmp); ++ } ++ else ++ { ++ if (sb_corerev(sbh) < 9) ++ W_REG(&cc->flash_waitcount, tmp); ++ ++ if ((sb_corerev(sbh) < 9) || ++ ((BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) && BCMINIT(sb_chiprev)(sbh) == 0)) { ++ W_REG(&cc->pcmcia_memwait, tmp); ++ } ++ } ++ // Added by Chen-I & Yen for enabling 5350 EXTIF ++ if (BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) ++ { ++ /* Set programmable interface timing for external uart */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ ++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(&cc->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ } ++ } ++ ++ /* Chip specific initialization */ ++ switch (BCMINIT(sb_chip)(sbh)) { ++ case BCM4710_DEVICE_ID: ++ /* Clear interrupt map */ ++ for (irq = 0; irq <= 4; irq++) ++ BCMINIT(sb_clearirq)(sbh, irq); ++ BCMINIT(sb_setirq)(sbh, 0, SB_CODEC, 0); ++ BCMINIT(sb_setirq)(sbh, 0, SB_EXTIF, 0); ++ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 1); ++ BCMINIT(sb_setirq)(sbh, 3, SB_ILINE20, 0); ++ BCMINIT(sb_setirq)(sbh, 4, SB_PCI, 0); ++ ASSERT(eir); ++ value = BCMINIT(early_nvram_get)("et0phyaddr"); ++ if (value && !strcmp(value, "31")) { ++ /* Enable internal UART */ ++ W_REG(&eir->corecontrol, CC_UE); ++ /* Give USB its own interrupt */ ++ BCMINIT(sb_setirq)(sbh, 1, SB_USB, 0); ++ } else { ++ /* Disable internal UART */ ++ W_REG(&eir->corecontrol, 0); ++ /* Give Ethernet its own interrupt */ ++ BCMINIT(sb_setirq)(sbh, 1, SB_ENET, 0); ++ BCMINIT(sb_setirq)(sbh, 0, SB_USB, 0); ++ } ++ break; ++ case BCM5350_DEVICE_ID: ++ /* Clear interrupt map */ ++ for (irq = 0; irq <= 4; irq++) ++ BCMINIT(sb_clearirq)(sbh, irq); ++ BCMINIT(sb_setirq)(sbh, 0, SB_CC, 0); ++ BCMINIT(sb_setirq)(sbh, 1, SB_D11, 0); ++ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 0); ++ BCMINIT(sb_setirq)(sbh, 3, SB_PCI, 0); ++ BCMINIT(sb_setirq)(sbh, 4, SB_USB, 0); ++ break; ++ } ++} ++ ++uint32 ++BCMINITFN(sb_mips_clock)(sb_t *sbh) ++{ ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ uint32 n, m; ++ uint idx; ++ uint32 pll_type, rate = 0; ++ ++ /* get index of the current core */ ++ idx = sb_coreidx(sbh); ++ pll_type = PLL_TYPE1; ++ ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ n = R_REG(&eir->clockcontrol_n); ++ m = R_REG(&eir->clockcontrol_sb); ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; ++ n = R_REG(&cc->clockcontrol_n); ++ if ((pll_type == PLL_TYPE2) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE6) || ++ (pll_type == PLL_TYPE7)) ++ m = R_REG(&cc->clockcontrol_mips); ++ else if (pll_type == PLL_TYPE5) { ++ rate = 200000000; ++ goto out; ++ } ++ else if (pll_type == PLL_TYPE3) { ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) { /* 5365 is also type3 */ ++ rate = 200000000; ++ goto out; ++ } else ++ m = R_REG(&cc->clockcontrol_m2); /* 5350 uses m2 to control mips */ ++ } else ++ m = R_REG(&cc->clockcontrol_sb); ++ } else ++ goto out; ++ ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ rate = 100000000; ++ else ++ /* calculate rate */ ++ rate = sb_clock_rate(pll_type, n, m); ++ ++ if (pll_type == PLL_TYPE6) ++ rate = SB2MIPS_T6(rate); ++ ++out: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ return rate; ++} ++ ++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) ++ ++static void ++BCMINITFN(handler)(void) ++{ ++ /* Step 11 */ ++ __asm__ ( ++ ".set\tmips32\n\t" ++ "ssnop\n\t" ++ "ssnop\n\t" ++ /* Disable interrupts */ ++ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ ++ "mfc0 $15, $12\n\t" ++ /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */ ++ "li $14, -31746\n\t" ++ "and $15, $15, $14\n\t" ++ "mtc0 $15, $12\n\t" ++ "eret\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ ".set\tmips0" ++ ); ++} ++ ++/* The following MUST come right after handler() */ ++static void ++BCMINITFN(afterhandler)(void) ++{ ++} ++ ++/* ++ * Set the MIPS, backplane and PCI clocks as closely as possible. ++ */ ++bool ++BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) ++{ ++ extifregs_t *eir = NULL; ++ chipcregs_t *cc = NULL; ++ mipsregs_t *mipsr = NULL; ++ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2; ++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg; ++ uint32 pll_type, sync_mode; ++ uint ic_size, ic_lsize; ++ uint idx, i; ++ typedef struct { ++ uint32 mipsclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci33; ++ uint32 pci25; ++ } n3m_table_t; ++ static n3m_table_t BCMINITDATA(type1_table)[] = { ++ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */ ++ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */ ++ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */ ++ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */ ++ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */ ++ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */ ++ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */ ++ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */ ++ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */ ++ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */ ++ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */ ++ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */ ++ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */ ++ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */ ++ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */ ++ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */ ++ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */ ++ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */ ++ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */ ++ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */ ++ }; ++ typedef struct { ++ uint32 mipsclock; ++ uint16 n; ++ uint32 m2; /* that is the clockcontrol_m2 */ ++ } type3_table_t; ++ static type3_table_t type3_table[] = { /* for 5350, mips clock is always double sb clock */ ++ { 150000000, 0x311, 0x4020005 }, ++ { 200000000, 0x311, 0x4020003 }, ++ }; ++ typedef struct { ++ uint32 mipsclock; ++ uint32 sbclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci33; ++ uint32 m2; ++ uint32 m3; ++ uint32 ratio_cfg; ++ uint32 ratio_parm; ++ } n4m_table_t; ++ ++ static n4m_table_t BCMINITDATA(type2_table)[] = { ++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555 }, ++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11, 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 }, ++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 }, ++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 11, 0x0aaa0555 } ++ }; ++ ++ static n4m_table_t BCMINITDATA(type4_table)[] = { ++ { 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 }, ++ { 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8, 0x012a00a9 }, ++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13, 0x254a14a9 }, ++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9, 0x02520129 }, ++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 }, ++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9, 0x02520129 }, ++ { 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, 0x0aaa0555 } ++ }; ++ ++ static n4m_table_t BCMINITDATA(type7_table)[] = { ++ { 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 }, ++ { 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, 0x0aaa0555 }, ++ { 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, 0x0aaa0555 } ++ }; ++ ++ ulong start, end, dst; ++ bool ret = FALSE; ++ ++ /* get index of the current core */ ++ idx = sb_coreidx(sbh); ++ clockcontrol_m2 = NULL; ++ ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ pll_type = PLL_TYPE1; ++ clockcontrol_n = &eir->clockcontrol_n; ++ clockcontrol_sb = &eir->clockcontrol_sb; ++ clockcontrol_pci = &eir->clockcontrol_pci; ++ clockcontrol_m2 = &cc->clockcontrol_m2; ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; ++ if (pll_type == PLL_TYPE6) { ++ clockcontrol_n = NULL; ++ clockcontrol_sb = NULL; ++ clockcontrol_pci = NULL; ++ } else { ++ clockcontrol_n = &cc->clockcontrol_n; ++ clockcontrol_sb = &cc->clockcontrol_sb; ++ clockcontrol_pci = &cc->clockcontrol_pci; ++ clockcontrol_m2 = &cc->clockcontrol_m2; ++ } ++ } else ++ goto done; ++ ++ if (pll_type == PLL_TYPE6) { ++ /* Silence compilers */ ++ orig_n = orig_sb = orig_pci = 0; ++ } else { ++ /* Store the current clock register values */ ++ orig_n = R_REG(clockcontrol_n); ++ orig_sb = R_REG(clockcontrol_sb); ++ orig_pci = R_REG(clockcontrol_pci); ++ } ++ ++ if (pll_type == PLL_TYPE1) { ++ /* Keep the current PCI clock if not specified */ ++ if (pciclock == 0) { ++ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci)); ++ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; ++ } ++ ++ /* Search for the closest MIPS clock less than or equal to a preferred value */ ++ for (i = 0; i < ARRAYSIZE(BCMINIT(type1_table)); i++) { ++ ASSERT(BCMINIT(type1_table)[i].mipsclock == ++ sb_clock_rate(pll_type, BCMINIT(type1_table)[i].n, BCMINIT(type1_table)[i].sb)); ++ if (BCMINIT(type1_table)[i].mipsclock > mipsclock) ++ break; ++ } ++ if (i == 0) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ i--; ++ } ++ ASSERT(BCMINIT(type1_table)[i].mipsclock <= mipsclock); ++ ++ /* No PLL change */ ++ if ((orig_n == BCMINIT(type1_table)[i].n) && ++ (orig_sb == BCMINIT(type1_table)[i].sb) && ++ (orig_pci == BCMINIT(type1_table)[i].pci33)) ++ goto done; ++ ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, BCMINIT(type1_table)[i].n); ++ W_REG(clockcontrol_sb, BCMINIT(type1_table)[i].sb); ++ if (pciclock == 25000000) ++ W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci25); ++ else ++ W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci33); ++ ++ /* Reset */ ++ sb_watchdog(sbh, 1); ++ ++ while (1); ++ } else if ((pll_type == PLL_TYPE3) && ++ (BCMINIT(sb_chip)(sbh) != BCM5365_DEVICE_ID)) { ++ /* 5350 */ ++ /* Search for the closest MIPS clock less than or equal to a preferred value */ ++ ++ for (i = 0; i < ARRAYSIZE(type3_table); i++) { ++ if (type3_table[i].mipsclock > mipsclock) ++ break; ++ } ++ if (i == 0) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ i--; ++ } ++ ASSERT(type3_table[i].mipsclock <= mipsclock); ++ ++ /* No PLL change */ ++ orig_m2 = R_REG(&cc->clockcontrol_m2); ++ if ((orig_n == type3_table[i].n) && ++ (orig_m2 == type3_table[i].m2)) { ++ goto done; ++ } ++ ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, type3_table[i].n); ++ W_REG(clockcontrol_m2, type3_table[i].m2); ++ ++ /* Reset */ ++ sb_watchdog(sbh, 1); ++ while (1); ++ } else if ((pll_type == PLL_TYPE2) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE6) || ++ (pll_type == PLL_TYPE7)) { ++ n4m_table_t *table = NULL, *te; ++ uint tabsz = 0; ++ ++ ASSERT(cc); ++ ++ orig_mips = R_REG(&cc->clockcontrol_mips); ++ ++ if (pll_type == PLL_TYPE6) { ++ uint32 new_mips = 0; ++ ++ ret = TRUE; ++ if (mipsclock <= SB2MIPS_T6(CC_T6_M1)) ++ new_mips = CC_T6_MMASK; ++ ++ if (orig_mips == new_mips) ++ goto done; ++ ++ W_REG(&cc->clockcontrol_mips, new_mips); ++ goto end_fill; ++ } ++ ++ if (pll_type == PLL_TYPE2) { ++ table = BCMINIT(type2_table); ++ tabsz = ARRAYSIZE(BCMINIT(type2_table)); ++ } else if (pll_type == PLL_TYPE4) { ++ table = BCMINIT(type4_table); ++ tabsz = ARRAYSIZE(BCMINIT(type4_table)); ++ } else if (pll_type == PLL_TYPE7) { ++ table = BCMINIT(type7_table); ++ tabsz = ARRAYSIZE(BCMINIT(type7_table)); ++ } else ++ ASSERT("No table for plltype" == NULL); ++ ++ /* Store the current clock register values */ ++ orig_m2 = R_REG(&cc->clockcontrol_m2); ++ orig_ratio_parm = 0; ++ orig_ratio_cfg = 0; ++ ++ /* Look up current ratio */ ++ for (i = 0; i < tabsz; i++) { ++ if ((orig_n == table[i].n) && ++ (orig_sb == table[i].sb) && ++ (orig_pci == table[i].pci33) && ++ (orig_m2 == table[i].m2) && ++ (orig_mips == table[i].m3)) { ++ orig_ratio_parm = table[i].ratio_parm; ++ orig_ratio_cfg = table[i].ratio_cfg; ++ break; ++ } ++ } ++ ++ /* Search for the closest MIPS clock greater or equal to a preferred value */ ++ for (i = 0; i < tabsz; i++) { ++ ASSERT(table[i].mipsclock == ++ sb_clock_rate(pll_type, table[i].n, table[i].m3)); ++ if ((mipsclock <= table[i].mipsclock) && ++ ((sbclock == 0) || (sbclock <= table[i].sbclock))) ++ break; ++ } ++ if (i == tabsz) { ++ ret = FALSE; ++ goto done; ++ } else { ++ te = &table[i]; ++ ret = TRUE; ++ } ++ ++ /* No PLL change */ ++ if ((orig_n == te->n) && ++ (orig_sb == te->sb) && ++ (orig_pci == te->pci33) && ++ (orig_m2 == te->m2) && ++ (orig_mips == te->m3)) ++ goto done; ++ ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, te->n); ++ W_REG(clockcontrol_sb, te->sb); ++ W_REG(clockcontrol_pci, te->pci33); ++ W_REG(&cc->clockcontrol_m2, te->m2); ++ W_REG(&cc->clockcontrol_mips, te->m3); ++ ++ /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */ ++ if ((pll_type == PLL_TYPE7) && ++ (te->sb != te->m2) && ++ (sb_clock_rate(pll_type, te->n, te->m2) == 120000000)) ++ W_REG(&cc->chipcontrol, R_REG(&cc->chipcontrol) | 0x100); ++ ++ /* No ratio change */ ++ if (orig_ratio_parm == te->ratio_parm) ++ goto end_fill; ++ ++ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); ++ ++ /* Preload the code into the cache */ ++ start = ((ulong) &&start_fill) & ~(ic_lsize - 1); ++ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); ++ while (start < end) { ++ cache_op(start, Fill_I); ++ start += ic_lsize; ++ } ++ ++ /* Copy the handler */ ++ start = (ulong) &BCMINIT(handler); ++ end = (ulong) &BCMINIT(afterhandler); ++ dst = KSEG1ADDR(0x180); ++ for (i = 0; i < (end - start); i += 4) ++ *((ulong *)(dst + i)) = *((ulong *)(start + i)); ++ ++ /* Preload handler into the cache one line at a time */ ++ for (i = 0; i < (end - start); i += 4) ++ cache_op(dst + i, Fill_I); ++ ++ /* Clear BEV bit */ ++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); ++ ++ /* Enable interrupts */ ++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); ++ ++ /* Enable MIPS timer interrupt */ ++ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(mipsr); ++ W_REG(&mipsr->intmask, 1); ++ ++ start_fill: ++ /* step 1, set clock ratios */ ++ MTC0(C0_BROADCOM, 3, te->ratio_parm); ++ MTC0(C0_BROADCOM, 1, te->ratio_cfg); ++ ++ /* step 2: program timer intr */ ++ W_REG(&mipsr->timer, 100); ++ (void) R_REG(&mipsr->timer); ++ ++ /* step 3, switch to async */ ++ sync_mode = MFC0(C0_BROADCOM, 4); ++ MTC0(C0_BROADCOM, 4, 1 << 22); ++ ++ /* step 4, set cfg active */ ++ MTC0(C0_BROADCOM, 2, 0x9); ++ ++ ++ /* steps 5 & 6 */ ++ __asm__ __volatile__ ( ++ ".set\tmips3\n\t" ++ "wait\n\t" ++ ".set\tmips0" ++ ); ++ ++ /* step 7, clear cfg_active */ ++ MTC0(C0_BROADCOM, 2, 0); ++ ++ /* Additional Step: set back to orig sync mode */ ++ MTC0(C0_BROADCOM, 4, sync_mode); ++ ++ /* step 8, fake soft reset */ ++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4); ++ ++ end_fill: ++ /* step 9 set watchdog timer */ ++ sb_watchdog(sbh, 20); ++ (void) R_REG(&cc->chipid); ++ ++ /* step 11 */ ++ __asm__ __volatile__ ( ++ ".set\tmips3\n\t" ++ "sync\n\t" ++ "wait\n\t" ++ ".set\tmips0" ++ ); ++ while (1); ++ } ++ ++done: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ return ret; ++} ++ ++/* ++ * This also must be run from the cache on 47xx ++ * so there are no mips core BIU ops in progress ++ * when the PFC is enabled. ++ */ ++ ++static void ++BCMINITFN(_enable_pfc)(uint32 mode) ++{ ++ /* write range */ ++ *(volatile uint32 *)PFC_CR1 = 0xffff0000; ++ ++ /* enable */ ++ *(volatile uint32 *)PFC_CR0 = mode; ++} ++ ++void ++BCMINITFN(enable_pfc)(uint32 mode) ++{ ++ ulong start, end; ++ int i; ++ ++ /* If auto then choose the correct mode for this ++ platform, currently we only ever select one mode */ ++ if (mode == PFC_AUTO) ++ mode = PFC_INST; ++ ++ /* enable prefetch cache if available */ ++ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) { ++ start = (ulong) &BCMINIT(_enable_pfc); ++ end = (ulong) &BCMINIT(enable_pfc); ++ ++ /* Preload handler into the cache one line at a time */ ++ for (i = 0; i < (end - start); i += 4) ++ cache_op(start + i, Fill_I); ++ ++ BCMINIT(_enable_pfc)(mode); ++ } ++} ++ ++/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ ++uint32 ++BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh) ++{ ++ sbmemcregs_t *memc; ++ uint32 ret = 0; ++ uint32 config, rd, wr, misc, dqsg, cd, sm, sd; ++ uint idx, rev; ++ ++ idx = sb_coreidx(sbh); ++ ++ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0); ++ if (memc == 0) ++ goto out; ++ ++ rev = sb_corerev(sbh); ++ ++ config = R_REG(&memc->config); ++ wr = R_REG(&memc->wrncdlcor); ++ rd = R_REG(&memc->rdncdlcor); ++ misc = R_REG(&memc->miscdlyctl); ++ dqsg = R_REG(&memc->dqsgatencdl); ++ ++ rd &= MEMC_RDNCDLCOR_RD_MASK; ++ wr &= MEMC_WRNCDLCOR_WR_MASK; ++ dqsg &= MEMC_DQSGATENCDL_G_MASK; ++ ++ if (config & MEMC_CONFIG_DDR) { ++ ret = (wr << 16) | (rd << 8) | dqsg; ++ } else { ++ if (rev > 0) ++ cd = rd; ++ else ++ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); ++ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; ++ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; ++ ret = (sm << 16) | (sd << 8) | cd; ++ } ++ ++out: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ return ret; ++} ++ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/sbpci.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/sbpci.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,534 @@ ++/* ++ * Low-Level PCI and SB support for BCM47xx ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <pcicfg.h> ++#include <bcmdevs.h> ++#include <sbconfig.h> ++#include <osl.h> ++#include <sbutils.h> ++#include <sbpci.h> ++#include <bcmendian.h> ++#include <bcmutils.h> ++#include <bcmnvram.h> ++#include <hndmips.h> ++ ++/* Can free sbpci_init() memory after boot */ ++#ifndef linux ++#define __init ++#endif ++ ++/* Emulated configuration space */ ++static pci_config_regs sb_config_regs[SB_MAXCORES]; ++ ++/* Banned cores */ ++static uint16 pci_ban[32] = { 0 }; ++static uint pci_banned = 0; ++ ++/* CardBus mode */ ++static bool cardbus = FALSE; ++ ++/* Disable PCI host core */ ++static bool pci_disabled = FALSE; ++ ++/* ++ * Functions for accessing external PCI configuration space ++ */ ++ ++/* Assume one-hot slot wiring */ ++#define PCI_SLOT_MAX 16 ++ ++static uint32 ++config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off) ++{ ++ uint coreidx; ++ sbpciregs_t *regs; ++ uint32 addr = 0; ++ ++ /* CardBusMode supports only one device */ ++ if (cardbus && dev > 1) ++ return 0; ++ ++ coreidx = sb_coreidx(sbh); ++ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); ++ ++ /* Type 0 transaction */ ++ if (bus == 1) { ++ /* Skip unwired slots */ ++ if (dev < PCI_SLOT_MAX) { ++ /* Slide the PCI window to the appropriate slot */ ++ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK)); ++ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) | ++ (func << 8) | (off & ~3); ++ } ++ } ++ ++ /* Type 1 transaction */ ++ else { ++ W_REG(®s->sbtopci1, SBTOPCI_CFG1); ++ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3); ++ } ++ ++ sb_setcoreidx(sbh, coreidx); ++ ++ return addr; ++} ++ ++static int ++extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ uint32 addr, *reg = NULL, val; ++ int ret = 0; ++ ++ if (pci_disabled || ++ !(addr = config_cmd(sbh, bus, dev, func, off)) || ++ !(reg = (uint32 *) REG_MAP(addr, len)) || ++ BUSPROBE(val, reg)) ++ val = 0xffffffff; ++ ++ val >>= 8 * (off & 3); ++ if (len == 4) ++ *((uint32 *) buf) = val; ++ else if (len == 2) ++ *((uint16 *) buf) = (uint16) val; ++ else if (len == 1) ++ *((uint8 *) buf) = (uint8) val; ++ else ++ ret = -1; ++ ++ if (reg) ++ REG_UNMAP(reg); ++ ++ return ret; ++} ++ ++static int ++extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ uint32 addr, *reg = NULL, val; ++ int ret = 0; ++ ++ if (pci_disabled || ++ !(addr = config_cmd(sbh, bus, dev, func, off)) || ++ !(reg = (uint32 *) REG_MAP(addr, len)) || ++ BUSPROBE(val, reg)) ++ goto done; ++ ++ if (len == 4) ++ val = *((uint32 *) buf); ++ else if (len == 2) { ++ val &= ~(0xffff << (8 * (off & 3))); ++ val |= *((uint16 *) buf) << (8 * (off & 3)); ++ } else if (len == 1) { ++ val &= ~(0xff << (8 * (off & 3))); ++ val |= *((uint8 *) buf) << (8 * (off & 3)); ++ } else ++ ret = -1; ++ ++ W_REG(reg, val); ++ ++ done: ++ if (reg) ++ REG_UNMAP(reg); ++ ++ return ret; ++} ++ ++/* ++ * Functions for accessing translated SB configuration space ++ */ ++ ++static int ++sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ pci_config_regs *cfg; ++ ++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) ++ return -1; ++ cfg = &sb_config_regs[dev]; ++ ++ ASSERT(ISALIGNED(off, len)); ++ ASSERT(ISALIGNED((uintptr)buf, len)); ++ ++ if (len == 4) ++ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); ++ else if (len == 2) ++ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off))); ++ else if (len == 1) ++ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off)); ++ else ++ return -1; ++ ++ return 0; ++} ++ ++static int ++sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ uint coreidx, n; ++ void *regs; ++ sbconfig_t *sb; ++ pci_config_regs *cfg; ++ ++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) ++ return -1; ++ cfg = &sb_config_regs[dev]; ++ ++ ASSERT(ISALIGNED(off, len)); ++ ASSERT(ISALIGNED((uintptr)buf, len)); ++ ++ /* Emulate BAR sizing */ ++ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) && ++ len == 4 && *((uint32 *) buf) == ~0) { ++ coreidx = sb_coreidx(sbh); ++ if ((regs = sb_setcoreidx(sbh, dev))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ /* Highest numbered address match register */ ++ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; ++ if (off == OFFSETOF(pci_config_regs, base[0])) ++ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1); ++#if 0 ++ else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1) ++ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2) ++ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3) ++ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1); ++#endif ++ } ++ sb_setcoreidx(sbh, coreidx); ++ return 0; ++ } ++ ++ if (len == 4) ++ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf)); ++ else if (len == 2) ++ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf)); ++ else if (len == 1) ++ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf); ++ else ++ return -1; ++ ++ return 0; ++} ++ ++int ++sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ if (bus == 0) ++ return sb_read_config(sbh, bus, dev, func, off, buf, len); ++ else ++ return extpci_read_config(sbh, bus, dev, func, off, buf, len); ++} ++ ++int ++sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ if (bus == 0) ++ return sb_write_config(sbh, bus, dev, func, off, buf, len); ++ else ++ return extpci_write_config(sbh, bus, dev, func, off, buf, len); ++} ++ ++void ++sbpci_ban(uint16 core) ++{ ++ if (pci_banned < ARRAYSIZE(pci_ban)) ++ pci_ban[pci_banned++] = core; ++} ++ ++static int ++sbpci_init_pci(sb_t *sbh) ++{ ++ uint chip, chiprev, chippkg, host; ++ uint32 boardflags; ++ sbpciregs_t *pci; ++ sbconfig_t *sb; ++ uint32 val; ++ ++ chip = sb_chip(sbh); ++ chiprev = sb_chiprev(sbh); ++ chippkg = sb_chippkg(sbh); ++ ++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) { ++ printf("PCI: no core\n"); ++ pci_disabled = TRUE; ++ return -1; ++ } ++ sb_core_reset(sbh, 0); ++ ++ boardflags = (uint32) getintvar(NULL, "boardflags"); ++ ++ if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ++ pci_disabled = TRUE; ++ ++ /* ++ * The 200-pin BCM4712 package does not bond out PCI. Even when ++ * PCI is bonded out, some boards may leave the pins ++ * floating. ++ */ ++ if (((chip == BCM4712_DEVICE_ID) && ++ ((chippkg == BCM4712SMALL_PKG_ID) || ++ (chippkg == BCM4712MID_PKG_ID))) || ++ (chip == BCM5350_DEVICE_ID) || ++ (boardflags & BFL_NOPCI)) ++ pci_disabled = TRUE; ++ ++ /* ++ * If the PCI core should not be touched (disabled, not bonded ++ * out, or pins floating), do not even attempt to access core ++ * registers. Otherwise, try to determine if it is in host ++ * mode. ++ */ ++ if (pci_disabled) ++ host = 0; ++ else ++ host = !BUSPROBE(val, &pci->control); ++ ++ if (!host) { ++ /* Disable PCI interrupts in client mode */ ++ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF); ++ W_REG(&sb->sbintvec, 0); ++ ++ /* Disable the PCI bridge in client mode */ ++ sbpci_ban(SB_PCI); ++ printf("PCI: Disabled\n"); ++ } else { ++ /* Reset the external PCI bus and enable the clock */ ++ W_REG(&pci->control, 0x5); /* enable the tristate drivers */ ++ W_REG(&pci->control, 0xd); /* enable the PCI clock */ ++ OSL_DELAY(150); /* delay > 100 us */ ++ W_REG(&pci->control, 0xf); /* deassert PCI reset */ ++ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */ ++ OSL_DELAY(1); /* delay 1 us */ ++ ++ /* Enable CardBusMode */ ++ cardbus = nvram_match("cardbus", "1"); ++ if (cardbus) { ++ printf("PCI: Enabling CardBus\n"); ++ /* GPIO 1 resets the CardBus device on bcm94710ap */ ++ sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY); ++ sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY); ++ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400); ++ } ++ ++ /* 64 MB I/O access window */ ++ W_REG(&pci->sbtopci0, SBTOPCI_IO); ++ /* 64 MB configuration access window */ ++ W_REG(&pci->sbtopci1, SBTOPCI_CFG0); ++ /* 1 GB memory access window */ ++ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA); ++ ++ /* Enable PCI bridge BAR0 prefetch and burst */ ++ val = 6; ++ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val)); ++ ++ /* Enable PCI interrupts */ ++ W_REG(&pci->intmask, PCI_INTA); ++ } ++ ++ return 0; ++} ++ ++static int ++sbpci_init_cores(sb_t *sbh) ++{ ++ uint chip, chiprev, chippkg, coreidx, i; ++ sbconfig_t *sb; ++ pci_config_regs *cfg; ++ void *regs; ++ char varname[8]; ++ uint wlidx = 0; ++ uint16 vendor, core; ++ uint8 class, subclass, progif; ++ uint32 val; ++ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; ++ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; ++ ++ chip = sb_chip(sbh); ++ chiprev = sb_chiprev(sbh); ++ chippkg = sb_chippkg(sbh); ++ coreidx = sb_coreidx(sbh); ++ ++ /* Scan the SB bus */ ++ bzero(sb_config_regs, sizeof(sb_config_regs)); ++ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) { ++ cfg->vendor = 0xffff; ++ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs))) ++ continue; ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ /* Read ID register and parse vendor and core */ ++ val = R_REG(&sb->sbidhigh); ++ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT; ++ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT; ++ progif = 0; ++ ++ /* Check if this core is banned */ ++ for (i = 0; i < pci_banned; i++) ++ if (core == pci_ban[i]) ++ break; ++ if (i < pci_banned) ++ continue; ++ ++ /* Known vendor translations */ ++ switch (vendor) { ++ case SB_VEND_BCM: ++ vendor = VENDOR_BROADCOM; ++ break; ++ } ++ ++ /* Determine class based on known core codes */ ++ switch (core) { ++ case SB_ILINE20: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ILINE_ID; ++ break; ++ case SB_ILINE100: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM4610_ILINE_ID; ++ break; ++ case SB_ENET: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ENET_ID; ++ break; ++ case SB_SDRAM: ++ case SB_MEMC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_RAM; ++ break; ++ case SB_PCI: ++#if 0 ++ class = PCI_CLASS_BRIDGE; ++ subclass = PCI_BRIDGE_PCI; ++ break; ++#endif ++ case SB_MIPS: ++ case SB_MIPS33: ++ class = PCI_CLASS_CPU; ++ subclass = PCI_CPU_MIPS; ++ break; ++ case SB_CODEC: ++ class = PCI_CLASS_COMM; ++ subclass = PCI_COMM_MODEM; ++ core = BCM47XX_V90_ID; ++ break; ++ case SB_USB: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USB_ID; ++ break; ++ case SB_USB11H: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USBH_ID; ++ break; ++ case SB_USB11D: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ core = BCM47XX_USBD_ID; ++ break; ++ case SB_IPSEC: ++ class = PCI_CLASS_CRYPT; ++ subclass = PCI_CRYPT_NETWORK; ++ core = BCM47XX_IPSEC_ID; ++ break; ++ case SB_ROBO: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ core = BCM47XX_ROBO_ID; ++ break; ++ case SB_EXTIF: ++ case SB_CC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_FLASH; ++ break; ++ case SB_D11: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ /* Let an nvram variable override this */ ++ sprintf(varname, "wl%did", wlidx); ++ wlidx++; ++ if ((core = getintvar(NULL, varname)) == 0) { ++ if (chip == BCM4712_DEVICE_ID) { ++ if (chippkg == BCM4712SMALL_PKG_ID) ++ core = BCM4306_D11G_ID; ++ else ++ core = BCM4306_D11DUAL_ID; ++ } else { ++ /* 4310 */ ++ core = BCM4310_D11B_ID; ++ } ++ } ++ break; ++ ++ default: ++ class = subclass = progif = 0xff; ++ break; ++ } ++ ++ /* Supported translations */ ++ cfg->vendor = htol16(vendor); ++ cfg->device = htol16(core); ++ cfg->rev_id = chiprev; ++ cfg->prog_if = progif; ++ cfg->sub_class = subclass; ++ cfg->base_class = class; ++ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0))); ++ cfg->base[1] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch1))); ++ cfg->base[2] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch2))); ++ cfg->base[3] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch3))); ++ cfg->base[4] = 0; ++ cfg->base[5] = 0; ++ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI) ++ cfg->header_type = PCI_HEADER_BRIDGE; ++ else ++ cfg->header_type = PCI_HEADER_NORMAL; ++ /* Save core interrupt flag */ ++ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK; ++ /* Default to MIPS shared interrupt 0 */ ++ cfg->int_line = 0; ++ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */ ++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || ++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ val = R_REG(&sb->sbipsflag); ++ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) { ++ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin) ++ break; ++ } ++ if (cfg->int_line > 4) ++ cfg->int_line = 0; ++ } ++ /* Emulated core */ ++ *((uint32 *) &cfg->sprom_control) = 0xffffffff; ++ } ++ ++ sb_setcoreidx(sbh, coreidx); ++ return 0; ++} ++ ++int __init ++sbpci_init(sb_t *sbh) ++{ ++ sbpci_init_pci(sbh); ++ sbpci_init_cores(sbh); ++ return 0; ++} ++ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/sbutils.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/sbutils.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,2370 @@ ++/* ++ * Misc utility routines for accessing chip-specific features ++ * of the SiliconBackplane-based Broadcom chips. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <sbutils.h> ++#include <bcmutils.h> ++#include <bcmdevs.h> ++#include <sbconfig.h> ++#include <sbchipc.h> ++#include <sbpci.h> ++#include <pcicfg.h> ++#include <sbextif.h> ++#include <bcmsrom.h> ++ ++/* debug/trace */ ++#define SB_ERROR(args) ++ ++ ++typedef uint32 (*sb_intrsoff_t)(void *intr_arg); ++typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); ++typedef bool (*sb_intrsenabled_t)(void *intr_arg); ++ ++/* misc sb info needed by some of the routines */ ++typedef struct sb_info { ++ ++ struct sb_pub sb; /* back plane public state(must be first field of sb_info */ ++ ++ void *osh; /* osl os handle */ ++ void *sdh; /* bcmsdh handle */ ++ ++ void *curmap; /* current regs va */ ++ void *regs[SB_MAXCORES]; /* other regs va */ ++ ++ uint curidx; /* current core index */ ++ uint dev_coreid; /* the core provides driver functions */ ++ ++ uint gpioidx; /* gpio control core index */ ++ uint gpioid; /* gpio control coretype */ ++ ++ uint numcores; /* # discovered cores */ ++ uint coreid[SB_MAXCORES]; /* id of each core */ ++ ++ void *intr_arg; /* interrupt callback function arg */ ++ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */ ++ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */ ++ sb_intrsenabled_t intrsenabled_fn; /* function to check if chip interrupts are enabled */ ++ ++} sb_info_t; ++ ++/* local prototypes */ ++static sb_info_t * BCMINIT(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, ++ uint bustype, void *sdh, char **vars, int *varsz); ++static void BCMINIT(sb_scan)(sb_info_t *si); ++static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val); ++static uint _sb_coreidx(sb_info_t *si); ++static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit); ++static uint BCMINIT(sb_pcidev2chip)(uint pcidev); ++static uint BCMINIT(sb_chip2numcores)(uint chip); ++static int sb_pci_fixcfg(sb_info_t *si); ++ ++/* delay needed between the mdio control/ mdiodata register data access */ ++#define PR28829_DELAY() OSL_DELAY(10) ++ ++ ++/* global variable to indicate reservation/release of gpio's*/ ++static uint32 sb_gpioreservation = 0; ++ ++#define SB_INFO(sbh) (sb_info_t*)sbh ++#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val))) ++#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE)) ++#define GOODREGS(regs) ((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE)) ++#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF) ++#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) ++#define BADIDX (SB_MAXCORES+1) ++#define NOREV -1 ++ ++#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI)) ++ ++/* sonicsrev */ ++#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT) ++#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT) ++ ++#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr)) ++#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v)) ++#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v))) ++#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v))) ++ ++/* ++ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ ++ * after core switching to avoid invalid register accesss inside ISR. ++ */ ++#define INTR_OFF(si, intr_val) \ ++ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ ++ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); } ++#define INTR_RESTORE(si, intr_val) \ ++ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ ++ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } ++ ++/* dynamic clock control defines */ ++#define LPOMINFREQ 25000 /* low power oscillator min */ ++#define LPOMAXFREQ 43000 /* low power oscillator max */ ++#define XTALMINFREQ 19800000 /* 20 MHz - 1% */ ++#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */ ++#define PCIMINFREQ 25000000 /* 25 MHz */ ++#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */ ++ ++#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ ++#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ ++ ++#define MIN_DUMPBUFLEN 32 /* debug */ ++ ++/* GPIO Based LED powersave defines */ ++#define DEFAULT_GPIO_ONTIME 10 ++#define DEFAULT_GPIO_OFFTIME 90 ++ ++#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) ++ ++static uint32 ++sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr) ++{ ++ uint32 val = R_REG(sbr); ++ ++ return (val); ++} ++ ++static void ++sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v) ++{ ++ W_REG(sbr, v); ++} ++ ++/* Using sb_kattach depends on SB_BUS support, either implicit */ ++/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */ ++#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS) ++ ++/* global kernel resource */ ++static sb_info_t ksi; ++ ++/* generic kernel variant of sb_attach() */ ++sb_t * ++BCMINITFN(sb_kattach)() ++{ ++ uint32 *regs; ++ ++ if (ksi.curmap == NULL) { ++ uint32 cid; ++ ++ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); ++ cid = R_REG((uint32 *)regs); ++ if (((cid & CID_ID_MASK) == BCM4712_DEVICE_ID) && ++ ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) && ++ ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) { ++ uint32 *scc, val; ++ ++ scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); ++ val = R_REG(scc); ++ SB_ERROR((" initial scc = 0x%x\n", val)); ++ val |= SCC_SS_XTAL; ++ W_REG(scc, val); ++ } ++ ++ if (BCMINIT(sb_doattach)(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, ++ SB_BUS, NULL, NULL, NULL) == NULL) { ++ return NULL; ++ } ++ } ++ ++ return (sb_t *)&ksi; ++} ++#endif ++ ++static sb_info_t * ++BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, ++ uint bustype, void *sdh, char **vars, int *varsz) ++{ ++ uint origidx; ++ chipcregs_t *cc; ++ sbconfig_t *sb; ++ uint32 w; ++ ++ ASSERT(GOODREGS(regs)); ++ ++ bzero((uchar*)si, sizeof (sb_info_t)); ++ ++ si->sb.buscoreidx = si->gpioidx = BADIDX; ++ ++ si->osh = osh; ++ si->curmap = regs; ++ si->sdh = sdh; ++ ++ /* check to see if we are a sb core mimic'ing a pci core */ ++ if (bustype == PCI_BUS) { ++ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff) ++ bustype = SB_BUS; ++ else ++ bustype = PCI_BUS; ++ } ++ ++ si->sb.bustype = bustype; ++ if (si->sb.bustype != BUSTYPE(si->sb.bustype)) { ++ SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n", ++ si->sb.bustype, BUSTYPE(si->sb.bustype))); ++ return NULL; ++ } ++ ++ /* kludge to enable the clock on the 4306 which lacks a slowclock */ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) ++ sb_clkctl_xtal(&si->sb, XTAL|PLL, ON); ++ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ w = OSL_PCI_READ_CONFIG(osh, PCI_BAR0_WIN, sizeof (uint32)); ++ if (!GOODCOREADDR(w)) ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32), SB_ENUM_BASE); ++ } ++ ++ /* initialize current core index value */ ++ si->curidx = _sb_coreidx(si); ++ ++ if (si->curidx == BADIDX) { ++ SB_ERROR(("sb_doattach: bad core index\n")); ++ return NULL; ++ } ++ ++ /* get sonics backplane revision */ ++ sb = REGS2SB(si->curmap); ++ si->sb.sonicsrev = (R_SBREG(si, &(sb)->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT; ++ ++ /* keep and reuse the initial register mapping */ ++ origidx = si->curidx; ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) ++ si->regs[origidx] = regs; ++ ++ /* is core-0 a chipcommon core? */ ++ si->numcores = 1; ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0); ++ if (sb_coreid(&si->sb) != SB_CC) ++ cc = NULL; ++ ++ /* determine chip id and rev */ ++ if (cc) { ++ /* chip common core found! */ ++ si->sb.chip = R_REG(&cc->chipid) & CID_ID_MASK; ++ si->sb.chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; ++ si->sb.chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; ++ } else { ++ /* no chip common core -- must convert device id to chip id */ ++ if ((si->sb.chip = BCMINIT(sb_pcidev2chip)(devid)) == 0) { ++ SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid)); ++ sb_setcoreidx(&si->sb, origidx); ++ return NULL; ++ } ++ } ++ ++ /* get chipcommon rev */ ++ si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV; ++ ++ /* determine numcores */ ++ if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6))) ++ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; ++ else ++ si->numcores = BCMINIT(sb_chip2numcores)(si->sb.chip); ++ ++ /* return to original core */ ++ sb_setcoreidx(&si->sb, origidx); ++ ++ /* sanity checks */ ++ ASSERT(si->sb.chip); ++ ++ /* scan for cores */ ++ BCMINIT(sb_scan)(si); ++ ++ /* fixup necessary chip/core configurations */ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ if (sb_pci_fixcfg(si)) { ++ SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n")); ++ return NULL; ++ } ++ } ++ ++ /* srom_var_init() depends on sb_scan() info */ ++ if (srom_var_init(si, si->sb.bustype, si->curmap, osh, vars, varsz)) { ++ SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n")); ++ return (NULL); ++ } ++ ++ if (cc == NULL) { ++ /* ++ * The chip revision number is hardwired into all ++ * of the pci function config rev fields and is ++ * independent from the individual core revision numbers. ++ * For example, the "A0" silicon of each chip is chip rev 0. ++ */ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); ++ si->sb.chiprev = w & 0xff; ++ } else ++ si->sb.chiprev = 0; ++ } ++ ++ /* gpio control core is required */ ++ if (!GOODIDX(si->gpioidx)) { ++ SB_ERROR(("sb_doattach: gpio control core not found\n")); ++ return NULL; ++ } ++ ++ /* get boardtype and boardrev */ ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: ++ /* do a pci config read to get subsystem id and subvendor id */ ++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32)); ++ si->sb.boardvendor = w & 0xffff; ++ si->sb.boardtype = (w >> 16) & 0xffff; ++ break; ++ ++ case SB_BUS: ++ case JTAG_BUS: ++ si->sb.boardvendor = VENDOR_BROADCOM; ++ if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0) ++ si->sb.boardtype = 0xffff; ++ break; ++ } ++ ++ if (si->sb.boardtype == 0) { ++ SB_ERROR(("sb_doattach: unknown board type\n")); ++ ASSERT(si->sb.boardtype); ++ } ++ ++ /* setup the GPIO based LED powersave register */ ++ if (si->sb.ccrev >= 16) { ++ w = getintvar(*vars, "gpiotimerval"); ++ if (!w) ++ w = DEFAULT_GPIOTIMERVAL; ++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w); ++ } ++ ++ ++ return (si); ++} ++ ++uint ++sb_coreid(sb_t *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); ++} ++ ++uint ++sb_coreidx(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->curidx); ++} ++ ++/* return current index of core */ ++static uint ++_sb_coreidx(sb_info_t *si) ++{ ++ sbconfig_t *sb; ++ uint32 sbaddr = 0; ++ ++ ASSERT(si); ++ ++ switch (BUSTYPE(si->sb.bustype)) { ++ case SB_BUS: ++ sb = REGS2SB(si->curmap); ++ sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0)); ++ break; ++ ++ case PCI_BUS: ++ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32)); ++ break; ++ ++#ifdef BCMJTAG ++ case JTAG_BUS: ++ sbaddr = (uint32)si->curmap; ++ break; ++#endif /* BCMJTAG */ ++ ++ default: ++ ASSERT(0); ++ } ++ ++ if (!GOODCOREADDR(sbaddr)) ++ return BADIDX; ++ ++ return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE); ++} ++ ++uint ++sb_corevendor(sb_t *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); ++} ++ ++uint ++sb_corerev(sb_t *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint sbidh; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ sbidh = R_SBREG(si, &(sb)->sbidhigh); ++ ++ return (SBCOREREV(sbidh)); ++} ++ ++void * ++sb_osh(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return si->osh; ++} ++ ++#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK) ++ ++/* set/clear sbtmstatelow core-specific flags */ ++uint32 ++sb_coreflags(sb_t *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint32 w; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ ASSERT((val & ~mask) == 0); ++ ASSERT((mask & ~SBTML_ALLOW) == 0); ++ ++ /* mask and set */ ++ if (mask || val) { ++ w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val; ++ W_SBREG(si, &sb->sbtmstatelow, w); ++ } ++ ++ /* return the new value */ ++ return (R_SBREG(si, &sb->sbtmstatelow) & SBTML_ALLOW); ++} ++ ++/* set/clear sbtmstatehigh core-specific flags */ ++uint32 ++sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint32 w; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ ASSERT((val & ~mask) == 0); ++ ASSERT((mask & ~SBTMH_FL_MASK) == 0); ++ ++ /* mask and set */ ++ if (mask || val) { ++ w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val; ++ W_SBREG(si, &sb->sbtmstatehigh, w); ++ } ++ ++ /* return the new value */ ++ return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK); ++} ++ ++/* caller needs to take care of core-specific bist hazards */ ++int ++sb_corebist(sb_t *sbh, uint coreid, uint coreunit) ++{ ++ uint32 sblo; ++ uint coreidx; ++ sb_info_t *si; ++ int result = 0; ++ ++ si = SB_INFO(sbh); ++ ++ coreidx = sb_findcoreidx(si, coreid, coreunit); ++ if (!GOODIDX(coreidx)) ++ result = BCME_ERROR; ++ else { ++ sblo = sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), 0, 0); ++ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, (sblo | SBTML_FGC | SBTML_BE)); ++ ++ SPINWAIT(((sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTD) == 0), 100000); ++ ++ if (sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTF) ++ result = BCME_ERROR; ++ ++ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, sblo); ++ } ++ ++ return result; ++} ++ ++bool ++sb_iscoreup(sb_t *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ return ((R_SBREG(si, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK); ++} ++ ++/* ++ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, ++ * switch back to the original core, and return the new value. ++ */ ++static uint ++sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val) ++{ ++ uint origidx; ++ uint32 *r; ++ uint w; ++ uint intr_val = 0; ++ ++ ASSERT(GOODIDX(coreidx)); ++ ASSERT(regoff < SB_CORE_SIZE); ++ ASSERT((val & ~mask) == 0); ++ ++ INTR_OFF(si, intr_val); ++ ++ /* save current core index */ ++ origidx = sb_coreidx(&si->sb); ++ ++ /* switch core */ ++ r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff); ++ ++ /* mask and set */ ++ if (mask || val) { ++ if (regoff >= SBCONFIGOFF) { ++ w = (R_SBREG(si, r) & ~mask) | val; ++ W_SBREG(si, r, w); ++ } else { ++ w = (R_REG(r) & ~mask) | val; ++ W_REG(r, w); ++ } ++ } ++ ++ /* readback */ ++ if (regoff >= SBCONFIGOFF) ++ w = R_SBREG(si, r); ++ else ++ w = R_REG(r); ++ ++ /* restore core index */ ++ if (origidx != coreidx) ++ sb_setcoreidx(&si->sb, origidx); ++ ++ INTR_RESTORE(si, intr_val); ++ return (w); ++} ++ ++#define DWORD_ALIGN(x) (x & ~(0x03)) ++#define BYTE_POS(x) (x & 0x3) ++#define WORD_POS(x) (x & 0x1) ++ ++#define BYTE_SHIFT(x) (8 * BYTE_POS(x)) ++#define WORD_SHIFT(x) (16 * WORD_POS(x)) ++ ++#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF) ++#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF) ++ ++#define read_pci_cfg_byte(a) \ ++ (BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff) ++ ++#define read_pci_cfg_write(a) \ ++ (WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff) ++ ++ ++/* scan the sb enumerated space to identify all cores */ ++static void ++BCMINITFN(sb_scan)(sb_info_t *si) ++{ ++ uint origidx; ++ uint i; ++ bool pci; ++ uint pciidx; ++ uint pcirev; ++ ++ ++ ++ /* numcores should already be set */ ++ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); ++ ++ /* save current core index */ ++ origidx = sb_coreidx(&si->sb); ++ ++ si->sb.buscorerev = NOREV; ++ si->sb.buscoreidx = BADIDX; ++ ++ si->gpioidx = BADIDX; ++ ++ pci = FALSE; ++ pcirev = NOREV; ++ pciidx = BADIDX; ++ ++ for (i = 0; i < si->numcores; i++) { ++ sb_setcoreidx(&si->sb, i); ++ si->coreid[i] = sb_coreid(&si->sb); ++ ++ if (si->coreid[i] == SB_PCI) { ++ pciidx = i; ++ pcirev = sb_corerev(&si->sb); ++ pci = TRUE; ++ } ++ } ++ if (pci) { ++ si->sb.buscoretype = SB_PCI; ++ si->sb.buscorerev = pcirev; ++ si->sb.buscoreidx = pciidx; ++ } ++ ++ /* ++ * Find the gpio "controlling core" type and index. ++ * Precedence: ++ * - if there's a chip common core - use that ++ * - else if there's a pci core (rev >= 2) - use that ++ * - else there had better be an extif core (4710 only) ++ */ ++ if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) { ++ si->gpioidx = sb_findcoreidx(si, SB_CC, 0); ++ si->gpioid = SB_CC; ++ } else if (PCI(si) && (si->sb.buscorerev >= 2)) { ++ si->gpioidx = si->sb.buscoreidx; ++ si->gpioid = SB_PCI; ++ } else if (sb_findcoreidx(si, SB_EXTIF, 0)) { ++ si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0); ++ si->gpioid = SB_EXTIF; ++ } else ++ ASSERT(si->gpioidx != BADIDX); ++ ++ /* return to original core index */ ++ sb_setcoreidx(&si->sb, origidx); ++} ++ ++/* may be called with core in reset */ ++void ++sb_detach(sb_t *sbh) ++{ ++ sb_info_t *si; ++ uint idx; ++ ++ si = SB_INFO(sbh); ++ ++ if (si == NULL) ++ return; ++ ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) ++ for (idx = 0; idx < SB_MAXCORES; idx++) ++ if (si->regs[idx]) { ++ REG_UNMAP(si->regs[idx]); ++ si->regs[idx] = NULL; ++ } ++ ++ if (si != &ksi) ++ MFREE(si->osh, si, sizeof (sb_info_t)); ++} ++ ++/* use pci dev id to determine chip id for chips not having a chipcommon core */ ++static uint ++BCMINITFN(sb_pcidev2chip)(uint pcidev) ++{ ++ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) ++ return (BCM4710_DEVICE_ID); ++ if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID)) ++ return (BCM4402_DEVICE_ID); ++ if (pcidev == BCM4401_ENET_ID) ++ return (BCM4402_DEVICE_ID); ++ if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID)) ++ return (BCM4307_DEVICE_ID); ++ if (pcidev == BCM4301_DEVICE_ID) ++ return (BCM4301_DEVICE_ID); ++ ++ return (0); ++} ++ ++/* convert chip number to number of i/o cores */ ++static uint ++BCMINITFN(sb_chip2numcores)(uint chip) ++{ ++ if (chip == BCM4710_DEVICE_ID) ++ return (9); ++ if (chip == BCM4402_DEVICE_ID) ++ return (3); ++ if ((chip == BCM4301_DEVICE_ID) || (chip == BCM4307_DEVICE_ID)) ++ return (5); ++ if (chip == BCM4306_DEVICE_ID) /* < 4306c0 */ ++ return (6); ++ if (chip == BCM4704_DEVICE_ID) ++ return (9); ++ if (chip == BCM5365_DEVICE_ID) ++ return (7); ++ ++ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); ++ ASSERT(0); ++ return (1); ++} ++ ++/* return index of coreid or BADIDX if not found */ ++static uint ++sb_findcoreidx( sb_info_t *si, uint coreid, uint coreunit) ++{ ++ uint found; ++ uint i; ++ ++ found = 0; ++ ++ for (i = 0; i < si->numcores; i++) ++ if (si->coreid[i] == coreid) { ++ if (found == coreunit) ++ return (i); ++ found++; ++ } ++ ++ return (BADIDX); ++} ++ ++/* ++ * this function changes logical "focus" to the indiciated core, ++ * must be called with interrupt off. ++ * Moreover, callers should keep interrupts off during switching out of and back to d11 core ++ */ ++void* ++sb_setcoreidx(sb_t *sbh, uint coreidx) ++{ ++ sb_info_t *si; ++ uint32 sbaddr; ++ ++ si = SB_INFO(sbh); ++ ++ if (coreidx >= si->numcores) ++ return (NULL); ++ ++ /* ++ * If the user has provided an interrupt mask enabled function, ++ * then assert interrupts are disabled before switching the core. ++ */ ++ ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg)); ++ ++ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE); ++ ++ switch (BUSTYPE(si->sb.bustype)) { ++ case SB_BUS: ++ /* map new one */ ++ if (!si->regs[coreidx]) { ++ si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE); ++ ASSERT(GOODREGS(si->regs[coreidx])); ++ } ++ si->curmap = si->regs[coreidx]; ++ break; ++ ++ case PCI_BUS: ++ /* point bar0 window */ ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr); ++ break; ++ ++#ifdef BCMJTAG ++ case JTAG_BUS: ++ /* map new one */ ++ if (!si->regs[coreidx]) { ++ si->regs[coreidx] = (void *)sbaddr; ++ ASSERT(GOODREGS(si->regs[coreidx])); ++ } ++ si->curmap = si->regs[coreidx]; ++ break; ++#endif /* BCMJTAG */ ++ } ++ ++ si->curidx = coreidx; ++ ++ return (si->curmap); ++} ++ ++/* ++ * this function changes logical "focus" to the indiciated core, ++ * must be called with interrupt off. ++ * Moreover, callers should keep interrupts off during switching out of and back to d11 core ++ */ ++void* ++sb_setcore(sb_t *sbh, uint coreid, uint coreunit) ++{ ++ sb_info_t *si; ++ uint idx; ++ ++ si = SB_INFO(sbh); ++ idx = sb_findcoreidx(si, coreid, coreunit); ++ if (!GOODIDX(idx)) ++ return (NULL); ++ ++ return (sb_setcoreidx(sbh, idx)); ++} ++ ++/* return chip number */ ++uint ++BCMINITFN(sb_chip)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.chip); ++} ++ ++/* return chip revision number */ ++uint ++BCMINITFN(sb_chiprev)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.chiprev); ++} ++ ++/* return chip common revision number */ ++uint ++BCMINITFN(sb_chipcrev)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.ccrev); ++} ++ ++/* return chip package option */ ++uint ++BCMINITFN(sb_chippkg)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.chippkg); ++} ++ ++/* return PCI core rev. */ ++uint ++BCMINITFN(sb_pcirev)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.buscorerev); ++} ++ ++bool ++BCMINITFN(sb_war16165)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ return (PCI(si) && (si->sb.buscorerev <= 10)); ++} ++ ++/* return board vendor id */ ++uint ++BCMINITFN(sb_boardvendor)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.boardvendor); ++} ++ ++/* return boardtype */ ++uint ++BCMINITFN(sb_boardtype)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ char *var; ++ ++ si = SB_INFO(sbh); ++ ++ if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) { ++ /* boardtype format is a hex string */ ++ si->sb.boardtype = getintvar(NULL, "boardtype"); ++ ++ /* backward compatibility for older boardtype string format */ ++ if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) { ++ if (!strcmp(var, "bcm94710dev")) ++ si->sb.boardtype = BCM94710D_BOARD; ++ else if (!strcmp(var, "bcm94710ap")) ++ si->sb.boardtype = BCM94710AP_BOARD; ++ else if (!strcmp(var, "bu4710")) ++ si->sb.boardtype = BU4710_BOARD; ++ else if (!strcmp(var, "bcm94702mn")) ++ si->sb.boardtype = BCM94702MN_BOARD; ++ else if (!strcmp(var, "bcm94710r1")) ++ si->sb.boardtype = BCM94710R1_BOARD; ++ else if (!strcmp(var, "bcm94710r4")) ++ si->sb.boardtype = BCM94710R4_BOARD; ++ else if (!strcmp(var, "bcm94702cpci")) ++ si->sb.boardtype = BCM94702CPCI_BOARD; ++ else if (!strcmp(var, "bcm95380_rr")) ++ si->sb.boardtype = BCM95380RR_BOARD; ++ } ++ } ++ ++ return (si->sb.boardtype); ++} ++ ++/* return bus type of sbh device */ ++uint ++sb_bus(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.bustype); ++} ++ ++/* return bus core type */ ++uint ++sb_buscoretype(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ return (si->sb.buscoretype); ++} ++ ++/* return bus core revision */ ++uint ++sb_buscorerev(sb_t *sbh) ++{ ++ sb_info_t *si; ++ si = SB_INFO(sbh); ++ ++ return (si->sb.buscorerev); ++} ++ ++/* return list of found cores */ ++uint ++sb_corelist(sb_t *sbh, uint coreid[]) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint))); ++ return (si->numcores); ++} ++ ++/* return current register mapping */ ++void * ++sb_coreregs(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ASSERT(GOODREGS(si->curmap)); ++ ++ return (si->curmap); ++} ++ ++ ++/* do buffered registers update */ ++void ++sb_commit(sb_t *sbh) ++{ ++ sb_info_t *si; ++ uint origidx; ++ uint intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ ++ origidx = si->curidx; ++ ASSERT(GOODIDX(origidx)); ++ ++ INTR_OFF(si, intr_val); ++ ++ /* switch over to chipcommon core if there is one, else use pci */ ++ if (si->sb.ccrev != NOREV) { ++ chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0); ++ ++ /* do the buffer registers update */ ++ W_REG(&ccregs->broadcastaddress, SB_COMMIT); ++ W_REG(&ccregs->broadcastdata, 0x0); ++ } else if (PCI(si)) { ++ sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0); ++ ++ /* do the buffer registers update */ ++ W_REG(&pciregs->bcastaddr, SB_COMMIT); ++ W_REG(&pciregs->bcastdata, 0x0); ++ } else ++ ASSERT(0); ++ ++ /* restore core index */ ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++} ++ ++/* reset and re-enable a core */ ++void ++sb_core_reset(sb_t *sbh, uint32 bits) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ volatile uint32 dummy; ++ ++ si = SB_INFO(sbh); ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ ++ /* ++ * Must do the disable sequence first to work for arbitrary current core state. ++ */ ++ sb_core_disable(sbh, bits); ++ ++ /* ++ * Now do the initialization sequence. ++ */ ++ ++ /* set reset while enabling the clock and forcing them on throughout the core */ ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++ ++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) { ++ W_SBREG(si, &sb->sbtmstatehigh, 0); ++ } ++ if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { ++ AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); ++ } ++ ++ /* clear reset and allow it to propagate throughout the core */ ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++ ++ /* leave clock enabled */ ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++} ++ ++void ++sb_core_tofixup(sb_t *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ ++ if ( (BUSTYPE(si->sb.bustype) != PCI_BUS) || (PCI(si) && (si->sb.buscorerev >= 5)) ) ++ return; ++ ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) { ++ SET_SBREG(si, &sb->sbimconfiglow, ++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x5 << SBIMCL_RTO_SHIFT) | 0x3); ++ } else { ++ if (sb_coreid(sbh) == SB_PCI) { ++ SET_SBREG(si, &sb->sbimconfiglow, ++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); ++ } else { ++ SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); ++ } ++ } ++ ++ sb_commit(sbh); ++} ++ ++/* ++ * Set the initiator timeout for the "master core". ++ * The master core is defined to be the core in control ++ * of the chip and so it issues accesses to non-memory ++ * locations (Because of dma *any* core can access memeory). ++ * ++ * The routine uses the bus to decide who is the master: ++ * SB_BUS => mips ++ * JTAG_BUS => chipc ++ * PCI_BUS => pci ++ * ++ * This routine exists so callers can disable initiator ++ * timeouts so accesses to very slow devices like otp ++ * won't cause an abort. The routine allows arbitrary ++ * settings of the service and request timeouts, though. ++ * ++ * Returns the timeout state before changing it or -1 ++ * on error. ++ */ ++ ++#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK) ++ ++uint32 ++sb_set_initiator_to(sb_t *sbh, uint32 to) ++{ ++ sb_info_t *si; ++ uint origidx, idx; ++ uint intr_val = 0; ++ uint32 tmp, ret = 0xffffffff; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ ++ if ((to & ~TO_MASK) != 0) ++ return ret; ++ ++ /* Figure out the master core */ ++ idx = BADIDX; ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: ++ idx = si->sb.buscoreidx; ++ break; ++ case JTAG_BUS: ++ idx = SB_CC_IDX; ++ break; ++ case SB_BUS: ++ if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX) ++ idx = sb_findcoreidx(si, SB_MIPS, 0); ++ break; ++ default: ++ ASSERT(0); ++ } ++ if (idx == BADIDX) ++ return ret; ++ ++ INTR_OFF(si, intr_val); ++ origidx = sb_coreidx(sbh); ++ ++ sb = REGS2SB(sb_setcoreidx(sbh, idx)); ++ ++ tmp = R_SBREG(si, &sb->sbimconfiglow); ++ ret = tmp & TO_MASK; ++ W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to); ++ ++ sb_commit(sbh); ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return ret; ++} ++ ++void ++sb_core_disable(sb_t *sbh, uint32 bits) ++{ ++ sb_info_t *si; ++ volatile uint32 dummy; ++ uint32 rej; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ ++ /* if core is already in reset, just return */ ++ if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET) ++ return; ++ ++ /* reject value changed between sonics 2.2 and 2.3 */ ++ if (si->sb.sonicsrev == SONICS_2_2) ++ rej = (1 << SBTML_REJ_SHIFT); ++ else ++ rej = (2 << SBTML_REJ_SHIFT); ++ ++ /* if clocks are not enabled, put into reset and return */ ++ if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0) ++ goto disable; ++ ++ /* set target reject and spin until busy is clear (preserve core-specific bits) */ ++ OR_SBREG(si, &sb->sbtmstatelow, rej); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++ SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000); ++ ++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) { ++ OR_SBREG(si, &sb->sbimstate, SBIM_RJ); ++ dummy = R_SBREG(si, &sb->sbimstate); ++ OSL_DELAY(1); ++ SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000); ++ } ++ ++ /* set reset and reject while enabling the clocks */ ++ W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(10); ++ ++ /* don't forget to clear the initiator reject bit */ ++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) ++ AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ); ++ ++disable: ++ /* leave reset and reject asserted */ ++ W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET)); ++ OSL_DELAY(1); ++} ++ ++/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */ ++void ++sb_watchdog(sb_t *sbh, uint ticks) ++{ ++ sb_info_t *si = SB_INFO(sbh); ++ ++ /* instant NMI */ ++ switch (si->gpioid) { ++ case SB_CC: ++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); ++ break; ++ case SB_EXTIF: ++ sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); ++ break; ++ } ++} ++ ++ ++/* ++ * Configure the pci core for pci client (NIC) action ++ * coremask is the bitvec of cores by index to be enabled. ++ */ ++void ++sb_pci_setup(sb_t *sbh, uint coremask) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ sbpciregs_t *pciregs; ++ uint32 sbflag; ++ uint32 w; ++ uint idx; ++ ++ si = SB_INFO(sbh); ++ ++ /* if not pci bus, we're done */ ++ if (BUSTYPE(si->sb.bustype) != PCI_BUS) ++ return; ++ ++ ASSERT(PCI(si)); ++ ASSERT(si->sb.buscoreidx != BADIDX); ++ ++ /* get current core index */ ++ idx = si->curidx; ++ ++ /* we interrupt on this backplane flag number */ ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK; ++ ++ /* switch over to pci core */ ++ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx); ++ sb = REGS2SB(pciregs); ++ ++ /* ++ * Enable sb->pci interrupts. Assume ++ * PCI rev 2.3 support was added in pci core rev 6 and things changed.. ++ */ ++ if ((PCI(si) && ((si->sb.buscorerev) >= 6))) { ++ /* pci config write to set this core bit in PCIIntMask */ ++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32)); ++ w |= (coremask << PCI_SBIM_SHIFT); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w); ++ } else { ++ /* set sbintvec bit for our flag number */ ++ OR_SBREG(si, &sb->sbintvec, (1 << sbflag)); ++ } ++ ++ if (PCI(si)) { ++ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); ++ if (si->sb.buscorerev >= 11) ++ OR_REG(&pciregs->sbtopci2, SBTOPCI_RC_READMULTI); ++ if (si->sb.buscorerev < 5) { ++ SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); ++ sb_commit(sbh); ++ } ++ } ++ ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++} ++ ++uint32 ++sb_base(uint32 admatch) ++{ ++ uint32 base; ++ uint type; ++ ++ type = admatch & SBAM_TYPE_MASK; ++ ASSERT(type < 3); ++ ++ base = 0; ++ ++ if (type == 0) { ++ base = admatch & SBAM_BASE0_MASK; ++ } else if (type == 1) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ base = admatch & SBAM_BASE1_MASK; ++ } else if (type == 2) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ base = admatch & SBAM_BASE2_MASK; ++ } ++ ++ return (base); ++} ++ ++uint32 ++sb_size(uint32 admatch) ++{ ++ uint32 size; ++ uint type; ++ ++ type = admatch & SBAM_TYPE_MASK; ++ ASSERT(type < 3); ++ ++ size = 0; ++ ++ if (type == 0) { ++ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1); ++ } else if (type == 1) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1); ++ } else if (type == 2) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1); ++ } ++ ++ return (size); ++} ++ ++/* return the core-type instantiation # of the current core */ ++uint ++sb_coreunit(sb_t *sbh) ++{ ++ sb_info_t *si; ++ uint idx; ++ uint coreid; ++ uint coreunit; ++ uint i; ++ ++ si = SB_INFO(sbh); ++ coreunit = 0; ++ ++ idx = si->curidx; ++ ++ ASSERT(GOODREGS(si->curmap)); ++ coreid = sb_coreid(sbh); ++ ++ /* count the cores of our type */ ++ for (i = 0; i < idx; i++) ++ if (si->coreid[i] == coreid) ++ coreunit++; ++ ++ return (coreunit); ++} ++ ++static INLINE uint32 ++factor6(uint32 x) ++{ ++ switch (x) { ++ case CC_F6_2: return 2; ++ case CC_F6_3: return 3; ++ case CC_F6_4: return 4; ++ case CC_F6_5: return 5; ++ case CC_F6_6: return 6; ++ case CC_F6_7: return 7; ++ default: return 0; ++ } ++} ++ ++/* calculate the speed the SB would run at given a set of clockcontrol values */ ++uint32 ++sb_clock_rate(uint32 pll_type, uint32 n, uint32 m) ++{ ++ uint32 n1, n2, clock, m1, m2, m3, mc; ++ ++ n1 = n & CN_N1_MASK; ++ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; ++ ++ if (pll_type == PLL_TYPE6) { ++ if (m & CC_T6_MMASK) ++ return CC_T6_M1; ++ else ++ return CC_T6_M0; ++ } else if ((pll_type == PLL_TYPE1) || ++ (pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE7)) { ++ n1 = factor6(n1); ++ n2 += CC_F5_BIAS; ++ } else if (pll_type == PLL_TYPE2) { ++ n1 += CC_T2_BIAS; ++ n2 += CC_T2_BIAS; ++ ASSERT((n1 >= 2) && (n1 <= 7)); ++ ASSERT((n2 >= 5) && (n2 <= 23)); ++ } else if (pll_type == PLL_TYPE5) { ++ return (100000000); ++ } else ++ ASSERT(0); ++ /* PLL types 3 and 7 use BASE2 (25Mhz) */ ++ if ((pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE7)) { ++ clock = CC_CLOCK_BASE2 * n1 * n2; ++ } ++ else ++ clock = CC_CLOCK_BASE1 * n1 * n2; ++ ++ if (clock == 0) ++ return 0; ++ ++ m1 = m & CC_M1_MASK; ++ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT; ++ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; ++ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; ++ ++ if ((pll_type == PLL_TYPE1) || ++ (pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE7)) { ++ m1 = factor6(m1); ++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3)) ++ m2 += CC_F5_BIAS; ++ else ++ m2 = factor6(m2); ++ m3 = factor6(m3); ++ ++ switch (mc) { ++ case CC_MC_BYPASS: return (clock); ++ case CC_MC_M1: return (clock / m1); ++ case CC_MC_M1M2: return (clock / (m1 * m2)); ++ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3)); ++ case CC_MC_M1M3: return (clock / (m1 * m3)); ++ default: return (0); ++ } ++ } else { ++ ASSERT(pll_type == PLL_TYPE2); ++ ++ m1 += CC_T2_BIAS; ++ m2 += CC_T2M2_BIAS; ++ m3 += CC_T2_BIAS; ++ ASSERT((m1 >= 2) && (m1 <= 7)); ++ ASSERT((m2 >= 3) && (m2 <= 10)); ++ ASSERT((m3 >= 2) && (m3 <= 7)); ++ ++ if ((mc & CC_T2MC_M1BYP) == 0) ++ clock /= m1; ++ if ((mc & CC_T2MC_M2BYP) == 0) ++ clock /= m2; ++ if ((mc & CC_T2MC_M3BYP) == 0) ++ clock /= m3; ++ ++ return(clock); ++ } ++} ++ ++/* returns the current speed the SB is running at */ ++uint32 ++sb_clock(sb_t *sbh) ++{ ++ sb_info_t *si; ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ uint32 n, m; ++ uint idx; ++ uint32 pll_type, rate; ++ uint intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ idx = si->curidx; ++ pll_type = PLL_TYPE1; ++ ++ INTR_OFF(si, intr_val); ++ ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ n = R_REG(&eir->clockcontrol_n); ++ m = R_REG(&eir->clockcontrol_sb); ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; ++ n = R_REG(&cc->clockcontrol_n); ++ if (pll_type == PLL_TYPE6) ++ m = R_REG(&cc->clockcontrol_mips); ++ else if (pll_type == PLL_TYPE3) ++ { ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ m = R_REG(&cc->clockcontrol_sb); ++ else ++ m = R_REG(&cc->clockcontrol_m2); ++ } ++ else ++ m = R_REG(&cc->clockcontrol_sb); ++ } else { ++ INTR_RESTORE(si, intr_val); ++ return 0; ++ } ++ ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ { ++ rate = 100000000; ++ } ++ else ++ { ++ /* calculate rate */ ++ rate = sb_clock_rate(pll_type, n, m); ++ if (pll_type == PLL_TYPE3) ++ rate = rate / 2; ++ } ++ ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ INTR_RESTORE(si, intr_val); ++ ++ return rate; ++} ++ ++/* change logical "focus" to the gpio core for optimized access */ ++void* ++sb_gpiosetcore(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ return (sb_setcoreidx(sbh, si->gpioidx)); ++} ++ ++/* mask&set gpiocontrol bits */ ++uint32 ++sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiocontrol); ++ break; ++ ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpiocontrol); ++ break; ++ ++ case SB_EXTIF: ++ return (0); ++ } ++ ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} ++ ++/* mask&set gpio output enable bits */ ++uint32 ++sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioouten); ++ break; ++ ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioouten); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpio[0].outen); ++ break; ++ } ++ ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} ++ ++/* mask&set gpio output bits */ ++uint32 ++sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioout); ++ break; ++ ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioout); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpio[0].out); ++ break; ++ } ++ ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} ++ ++/* reserve one gpio */ ++uint32 ++sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */ ++ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { ++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); ++ return -1; ++ } ++ /* make sure only one bit is set */ ++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) { ++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); ++ return -1; ++ } ++ ++ /* already reserved */ ++ if (sb_gpioreservation & gpio_bitmask) ++ return -1; ++ /* set reservation */ ++ sb_gpioreservation |= gpio_bitmask; ++ ++ return sb_gpioreservation; ++} ++ ++/* release one gpio */ ++/* ++ * releasing the gpio doesn't change the current value on the GPIO last write value ++ * persists till some one overwrites it ++*/ ++ ++uint32 ++sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */ ++ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { ++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); ++ return -1; ++ } ++ /* make sure only one bit is set */ ++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) { ++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); ++ return -1; ++ } ++ ++ /* already released */ ++ if (!(sb_gpioreservation & gpio_bitmask)) ++ return -1; ++ ++ /* clear reservation */ ++ sb_gpioreservation &= ~gpio_bitmask; ++ ++ return sb_gpioreservation; ++} ++ ++/* return the current gpioin register value */ ++uint32 ++sb_gpioin(sb_t *sbh) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioin); ++ break; ++ ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioin); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpioin); ++ break; ++ } ++ ++ return (sb_corereg(si, si->gpioidx, regoff, 0, 0)); ++} ++ ++/* mask&set gpio interrupt polarity bits */ ++uint32 ++sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiointpolarity); ++ break; ++ ++ case SB_PCI: ++ /* pci gpio implementation does not support interrupt polarity */ ++ ASSERT(0); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpiointpolarity); ++ break; ++ } ++ ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} ++ ++/* mask&set gpio interrupt mask bits */ ++uint32 ++sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiointmask); ++ break; ++ ++ case SB_PCI: ++ /* pci gpio implementation does not support interrupt mask */ ++ ASSERT(0); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpiointmask); ++ break; ++ } ++ ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} ++ ++/* assign the gpio to an led */ ++uint32 ++sb_gpioled(sb_t *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ if (si->sb.ccrev < 16) ++ return -1; ++ ++ /* gpio led powersave reg */ ++ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val)); ++} ++ ++/* mask&set gpio timer val */ ++uint32 ++sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval) ++{ ++ sb_info_t *si; ++ si = SB_INFO(sbh); ++ ++ if (si->sb.ccrev < 16) ++ return -1; ++ ++ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval)); ++} ++ ++ ++/* return the slow clock source - LPO, XTAL, or PCI */ ++static uint ++sb_slowclk_src(sb_info_t *si) ++{ ++ chipcregs_t *cc; ++ ++ ++ ASSERT(sb_coreid(&si->sb) == SB_CC); ++ ++ if (si->sb.ccrev < 6) { ++ if ((BUSTYPE(si->sb.bustype) == PCI_BUS) ++ && (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)) & PCI_CFG_GPIO_SCS)) ++ return (SCC_SS_PCI); ++ else ++ return (SCC_SS_XTAL); ++ } else if (si->sb.ccrev < 10) { ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); ++ return (R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK); ++ } else /* Insta-clock */ ++ return (SCC_SS_XTAL); ++} ++ ++/* return the ILP (slowclock) min or max frequency */ ++static uint ++sb_slowclk_freq(sb_info_t *si, bool max) ++{ ++ chipcregs_t *cc; ++ uint32 slowclk; ++ uint div; ++ ++ ++ ASSERT(sb_coreid(&si->sb) == SB_CC); ++ ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); ++ ++ /* shouldn't be here unless we've established the chip has dynamic clk control */ ++ ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL); ++ ++ slowclk = sb_slowclk_src(si); ++ if (si->sb.ccrev < 6) { ++ if (slowclk == SCC_SS_PCI) ++ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64)); ++ else ++ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); ++ } else if (si->sb.ccrev < 10) { ++ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); ++ if (slowclk == SCC_SS_LPO) ++ return (max? LPOMAXFREQ : LPOMINFREQ); ++ else if (slowclk == SCC_SS_XTAL) ++ return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div)); ++ else if (slowclk == SCC_SS_PCI) ++ return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div)); ++ else ++ ASSERT(0); ++ } else { ++ /* Chipc rev 10 is InstaClock */ ++ div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHIFT; ++ div = 4 * (div + 1); ++ return (max ? XTALMAXFREQ : (XTALMINFREQ/div)); ++ } ++ return (0); ++} ++ ++static void ++sb_clkctl_setdelay(sb_info_t *si, void *chipcregs) ++{ ++ chipcregs_t * cc; ++ uint slowmaxfreq, pll_delay, slowclk; ++ uint pll_on_delay, fref_sel_delay; ++ ++ pll_delay = PLL_DELAY; ++ ++ /* If the slow clock is not sourced by the xtal then add the xtal_on_delay ++ * since the xtal will also be powered down by dynamic clk control logic. ++ */ ++ slowclk = sb_slowclk_src(si); ++ if (slowclk != SCC_SS_XTAL) ++ pll_delay += XTAL_ON_DELAY; ++ ++ /* Starting with 4318 it is ILP that is used for the delays */ ++ slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE); ++ ++ pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; ++ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; ++ ++ cc = (chipcregs_t *)chipcregs; ++ W_REG(&cc->pll_on_delay, pll_on_delay); ++ W_REG(&cc->fref_sel_delay, fref_sel_delay); ++} ++ ++int ++sb_pwrctl_slowclk(void *sbh, bool set, uint *div) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint intr_val = 0; ++ uint err = 0; ++ ++ si = SB_INFO(sbh); ++ ++ /* chipcommon cores prior to rev6 don't support slowclkcontrol */ ++ if (si->sb.ccrev < 6) ++ return 1; ++ ++ /* chipcommon cores rev10 are a whole new ball game */ ++ if (si->sb.ccrev >= 10) ++ return 1; ++ ++ if (set && ((*div % 4) || (*div < 4))) ++ return 2; ++ ++ INTR_OFF(si, intr_val); ++ origidx = si->curidx; ++ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); ++ ASSERT(cc != NULL); ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) { ++ err = 3; ++ goto done; ++ } ++ ++ if (set) { ++ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHIFT)); ++ sb_clkctl_setdelay(sbh, (void *)cc); ++ } else ++ *div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return err; ++} ++ ++/* initialize power control delay registers */ ++void sb_clkctl_init(sb_t *sbh) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ ++ si = SB_INFO(sbh); ++ ++ origidx = si->curidx; ++ ++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) ++ return; ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; ++ ++ /* set all Instaclk chip ILP to 1 MHz */ ++ if (si->sb.ccrev >= 10) ++ SET_REG(&cc->system_clk_ctl, SYCC_CD_MASK, (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); ++ ++ sb_clkctl_setdelay(si, (void *)cc); ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++} ++void sb_pwrctl_init(sb_t *sbh) ++{ ++sb_clkctl_init(sbh); ++} ++/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ ++uint16 ++sb_clkctl_fast_pwrup_delay(sb_t *sbh) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint slowminfreq; ++ uint16 fpdelay; ++ uint intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ fpdelay = 0; ++ origidx = si->curidx; ++ ++ INTR_OFF(si, intr_val); ++ ++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) ++ goto done; ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; ++ ++ slowminfreq = sb_slowclk_freq(si, FALSE); ++ fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return (fpdelay); ++} ++uint16 sb_pwrctl_fast_pwrup_delay(sb_t *sbh) ++{ ++return sb_clkctl_fast_pwrup_delay(sbh); ++} ++/* turn primary xtal and/or pll off/on */ ++int ++sb_clkctl_xtal(sb_t *sbh, uint what, bool on) ++{ ++ sb_info_t *si; ++ uint32 in, out, outen; ++ ++ si = SB_INFO(sbh); ++ ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: ++ ++ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); ++ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); ++ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); ++ ++ /* ++ * Avoid glitching the clock if GPRS is already using it. ++ * We can't actually read the state of the PLLPD so we infer it ++ * by the value of XTAL_PU which *is* readable via gpioin. ++ */ ++ if (on && (in & PCI_CFG_GPIO_XTAL)) ++ return (0); ++ ++ if (what & XTAL) ++ outen |= PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ outen |= PCI_CFG_GPIO_PLL; ++ ++ if (on) { ++ /* turn primary xtal on */ ++ if (what & XTAL) { ++ out |= PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ out |= PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ OSL_DELAY(XTAL_ON_DELAY); ++ } ++ ++ /* turn pll on */ ++ if (what & PLL) { ++ out &= ~PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_DELAY(2000); ++ } ++ } else { ++ if (what & XTAL) ++ out &= ~PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ out |= PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ } ++ ++ default: ++ return (-1); ++ } ++ ++ return (0); ++} ++ ++int sb_pwrctl_xtal(sb_t *sbh, uint what, bool on) ++{ ++return sb_clkctl_xtal(sbh,what,on); ++} ++ ++/* set dynamic clk control mode (forceslow, forcefast, dynamic) */ ++/* returns true if ignore pll off is set and false if it is not */ ++bool ++sb_clkctl_clk(sb_t *sbh, uint mode) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint32 scc; ++ bool forcefastclk=FALSE; ++ uint intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ ++ /* chipcommon cores prior to rev6 don't support dynamic clock control */ ++ if (si->sb.ccrev < 6) ++ return (FALSE); ++ ++ /* chipcommon cores rev10 are a whole new ball game */ ++ if (si->sb.ccrev >= 10) ++ return (FALSE); ++ ++ INTR_OFF(si, intr_val); ++ ++ origidx = si->curidx; ++ ++ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); ++ ASSERT(cc != NULL); ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; ++ ++ switch (mode) { ++ case CLK_FAST: /* force fast (pll) clock */ ++ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ ++ sb_clkctl_xtal(&si->sb, XTAL, ON); ++ ++ SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); ++ break; ++ ++ case CLK_DYNAMIC: /* enable dynamic clock control */ ++ scc = R_REG(&cc->slow_clk_ctl); ++ scc &= ~(SCC_FS | SCC_IP | SCC_XC); ++ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) ++ scc |= SCC_XC; ++ W_REG(&cc->slow_clk_ctl, scc); ++ ++ /* for dynamic control, we have to release our xtal_pu "force on" */ ++ if (scc & SCC_XC) ++ sb_clkctl_xtal(&si->sb, XTAL, OFF); ++ break; ++ ++ default: ++ ASSERT(0); ++ } ++ ++ /* Is the h/w forcing the use of the fast clk */ ++ forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP); ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return (forcefastclk); ++} ++ ++bool sb_pwrctl_clk(sb_t *sbh, uint mode) ++{ ++return sb_clkctl_clk(sbh, mode); ++} ++/* register driver interrupt disabling and restoring callback functions */ ++void ++sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ si->intr_arg = intr_arg; ++ si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn; ++ si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn; ++ si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn; ++ /* save current core id. when this function called, the current core ++ * must be the core which provides driver functions(il, et, wl, etc.) ++ */ ++ si->dev_coreid = si->coreid[si->curidx]; ++} ++ ++ ++void ++sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, ++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif) ++{ ++ uint vendor, core, unit; ++ uint chip, chippkg; ++ char varname[8]; ++ uint8 class, subclass, progif; ++ ++ vendor = sb_corevendor(sbh); ++ core = sb_coreid(sbh); ++ unit = sb_coreunit(sbh); ++ ++ chip = BCMINIT(sb_chip)(sbh); ++ chippkg = BCMINIT(sb_chippkg)(sbh); ++ ++ progif = 0; ++ ++ /* Known vendor translations */ ++ switch (vendor) { ++ case SB_VEND_BCM: ++ vendor = VENDOR_BROADCOM; ++ break; ++ } ++ ++ /* Determine class based on known core codes */ ++ switch (core) { ++ case SB_ILINE20: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ILINE_ID; ++ break; ++ case SB_ENET: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ENET_ID; ++ break; ++ case SB_SDRAM: ++ case SB_MEMC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_RAM; ++ break; ++ case SB_PCI: ++ class = PCI_CLASS_BRIDGE; ++ subclass = PCI_BRIDGE_PCI; ++ break; ++ case SB_MIPS: ++ case SB_MIPS33: ++ class = PCI_CLASS_CPU; ++ subclass = PCI_CPU_MIPS; ++ break; ++ case SB_CODEC: ++ class = PCI_CLASS_COMM; ++ subclass = PCI_COMM_MODEM; ++ core = BCM47XX_V90_ID; ++ break; ++ case SB_USB: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USB_ID; ++ break; ++ case SB_USB11H: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USBH_ID; ++ break; ++ case SB_USB11D: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ core = BCM47XX_USBD_ID; ++ break; ++ case SB_IPSEC: ++ class = PCI_CLASS_CRYPT; ++ subclass = PCI_CRYPT_NETWORK; ++ core = BCM47XX_IPSEC_ID; ++ break; ++ case SB_ROBO: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ core = BCM47XX_ROBO_ID; ++ break; ++ case SB_EXTIF: ++ case SB_CC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_FLASH; ++ break; ++ case SB_D11: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ /* Let an nvram variable override this */ ++ sprintf(varname, "wl%did", unit); ++ if ((core = getintvar(NULL, varname)) == 0) { ++ if (chip == BCM4712_DEVICE_ID) { ++ if (chippkg == BCM4712SMALL_PKG_ID) ++ core = BCM4306_D11G_ID; ++ else ++ core = BCM4306_D11DUAL_ID; ++ } ++ } ++ break; ++ ++ default: ++ class = subclass = progif = 0xff; ++ break; ++ } ++ ++ *pcivendor = (uint16)vendor; ++ *pcidevice = (uint16)core; ++ *pciclass = class; ++ *pcisubclass = subclass; ++ *pciprogif = progif; ++} ++ ++/* Fix chip's configuration. The current core may be changed upon return */ ++static int ++sb_pci_fixcfg(sb_info_t *si) ++{ ++ uint origidx, pciidx; ++ sbpciregs_t *pciregs; ++ uint16 val16, *reg16; ++ ++ ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS); ++ ++ /* Fix PCI(e) SROM shadow area */ ++ /* save the current index */ ++ origidx = sb_coreidx(&si->sb); ++ ++ if (si->sb.buscoretype == SB_PCI) { ++ pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0); ++ ASSERT(pciregs); ++ reg16 = &pciregs->sprom[SRSH_PI_OFFSET]; ++ } ++ else { ++ ASSERT(0); ++ return -1; ++ } ++ pciidx = sb_coreidx(&si->sb); ++ val16 = R_REG(reg16); ++ if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) { ++ val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK); ++ W_REG(reg16, val16); ++ } ++ ++ /* restore the original index */ ++ sb_setcoreidx(&si->sb, origidx); ++ ++ return 0; ++} ++ ++EXPORT_SYMBOL(sb_boardtype); ++EXPORT_SYMBOL(sb_boardvendor); ++EXPORT_SYMBOL(sb_gpiocontrol); ++EXPORT_SYMBOL(sb_gpioin); ++EXPORT_SYMBOL(sb_gpiointmask); ++EXPORT_SYMBOL(sb_gpiointpolarity); ++EXPORT_SYMBOL(sb_gpioled); ++EXPORT_SYMBOL(sb_gpioout); ++EXPORT_SYMBOL(sb_gpioouten); ++EXPORT_SYMBOL(sb_gpiorelease); ++EXPORT_SYMBOL(sb_gpioreserve); ++EXPORT_SYMBOL(sb_gpiosetcore); ++EXPORT_SYMBOL(sb_gpiotimerval); ++EXPORT_SYMBOL(sb_watchdog); +diff -Nur linux-2.6.17/arch/mips/bcm947xx/broadcom/sflash.c linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/sflash.c +--- linux-2.6.17/arch/mips/bcm947xx/broadcom/sflash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/broadcom/sflash.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,418 @@ ++/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <osl.h> ++#include <typedefs.h> ++#include <sbconfig.h> ++#include <sbchipc.h> ++#include <mipsinc.h> ++#include <bcmutils.h> ++#include <bcmdevs.h> ++#include <sflash.h> ++ ++/* Private global state */ ++static struct sflash sflash; ++ ++/* Issue a serial flash command */ ++static INLINE void ++sflash_cmd(chipcregs_t *cc, uint opcode) ++{ ++ W_REG(&cc->flashcontrol, SFLASH_START | opcode); ++ while (R_REG(&cc->flashcontrol) & SFLASH_BUSY); ++} ++ ++/* Initialize serial flash access */ ++struct sflash * ++sflash_init(chipcregs_t *cc) ++{ ++ uint32 id, id2; ++ ++ bzero(&sflash, sizeof(sflash)); ++ ++ sflash.type = R_REG(&cc->capabilities) & CAP_FLASH_MASK; ++ ++ switch (sflash.type) { ++ case SFLASH_ST: ++ /* Probe for ST chips */ ++ sflash_cmd(cc, SFLASH_ST_DP); ++ sflash_cmd(cc, SFLASH_ST_RES); ++ id = R_REG(&cc->flashdata); ++ switch (id) { ++ case 0x11: ++ /* ST M25P20 2 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 4; ++ break; ++ case 0x12: ++ /* ST M25P40 4 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 8; ++ break; ++ case 0x13: ++ /* ST M25P80 8 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 16; ++ break; ++ case 0x14: ++ /* ST M25P16 16 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 32; ++ break; ++ case 0x15: ++ /* ST M25P32 32 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 64; ++ break; ++ case 0xbf: ++ W_REG(&cc->flashaddress, 1); ++ sflash_cmd(cc, SFLASH_ST_RES); ++ id2 = R_REG(&cc->flashdata); ++ if (id2 == 0x44) { ++ /* SST M25VF80 4 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 8; ++ } ++ break; ++ } ++ break; ++ ++ case SFLASH_AT: ++ /* Probe for Atmel chips */ ++ sflash_cmd(cc, SFLASH_AT_STATUS); ++ id = R_REG(&cc->flashdata) & 0x3c; ++ switch (id) { ++ case 0xc: ++ /* Atmel AT45DB011 1Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 512; ++ break; ++ case 0x14: ++ /* Atmel AT45DB021 2Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 1024; ++ break; ++ case 0x1c: ++ /* Atmel AT45DB041 4Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 2048; ++ break; ++ case 0x24: ++ /* Atmel AT45DB081 8Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 4096; ++ break; ++ case 0x2c: ++ /* Atmel AT45DB161 16Mbit Serial Flash */ ++ sflash.blocksize = 512; ++ sflash.numblocks = 4096; ++ break; ++ case 0x34: ++ /* Atmel AT45DB321 32Mbit Serial Flash */ ++ sflash.blocksize = 512; ++ sflash.numblocks = 8192; ++ break; ++ case 0x3c: ++ /* Atmel AT45DB642 64Mbit Serial Flash */ ++ sflash.blocksize = 1024; ++ sflash.numblocks = 8192; ++ break; ++ } ++ break; ++ } ++ ++ sflash.size = sflash.blocksize * sflash.numblocks; ++ return sflash.size ? &sflash : NULL; ++} ++ ++/* Read len bytes starting at offset into buf. Returns number of bytes read. */ ++int ++sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf) ++{ ++ int cnt; ++ uint32 *from, *to; ++ ++ if (!len) ++ return 0; ++ ++ if ((offset + len) > sflash.size) ++ return -22; ++ ++ if ((len >= 4) && (offset & 3)) ++ cnt = 4 - (offset & 3); ++ else if ((len >= 4) && ((uint32)buf & 3)) ++ cnt = 4 - ((uint32)buf & 3); ++ else ++ cnt = len; ++ ++ from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset); ++ to = (uint32 *)buf; ++ ++ if (cnt < 4) { ++ bcopy(from, to, cnt); ++ return cnt; ++ } ++ ++ while (cnt >= 4) { ++ *to++ = *from++; ++ cnt -= 4; ++ } ++ ++ return (len - cnt); ++} ++ ++/* Poll for command completion. Returns zero when complete. */ ++int ++sflash_poll(chipcregs_t *cc, uint offset) ++{ ++ if (offset >= sflash.size) ++ return -22; ++ ++ switch (sflash.type) { ++ case SFLASH_ST: ++ /* Check for ST Write In Progress bit */ ++ sflash_cmd(cc, SFLASH_ST_RDSR); ++ return R_REG(&cc->flashdata) & SFLASH_ST_WIP; ++ case SFLASH_AT: ++ /* Check for Atmel Ready bit */ ++ sflash_cmd(cc, SFLASH_AT_STATUS); ++ return !(R_REG(&cc->flashdata) & SFLASH_AT_READY); ++ } ++ ++ return 0; ++} ++ ++/* Write len bytes starting at offset into buf. Returns number of bytes ++ * written. Caller should poll for completion. ++ */ ++int ++sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf) ++{ ++ struct sflash *sfl; ++ int ret = 0; ++ bool is4712b0; ++ uint32 page, byte, mask; ++ ++ if (!len) ++ return 0; ++ ++ if ((offset + len) > sflash.size) ++ return -22; ++ ++ sfl = &sflash; ++ switch (sfl->type) { ++ case SFLASH_ST: ++ mask = R_REG(&cc->chipid); ++ is4712b0 = (((mask & CID_ID_MASK) == BCM4712_DEVICE_ID) && ++ ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT))); ++ /* Enable writes */ ++ sflash_cmd(cc, SFLASH_ST_WREN); ++ if (is4712b0) { ++ mask = 1 << 14; ++ W_REG(&cc->flashaddress, offset); ++ W_REG(&cc->flashdata, *buf++); ++ /* Set chip select */ ++ OR_REG(&cc->gpioout, mask); ++ /* Issue a page program with the first byte */ ++ sflash_cmd(cc, SFLASH_ST_PP); ++ ret = 1; ++ offset++; ++ len--; ++ while (len > 0) { ++ if ((offset & 255) == 0) { ++ /* Page boundary, drop cs and return */ ++ AND_REG(&cc->gpioout, ~mask); ++ if (!sflash_poll(cc, offset)) { ++ /* Flash rejected command */ ++ return -11; ++ } ++ return ret; ++ } else { ++ /* Write single byte */ ++ sflash_cmd(cc, *buf++); ++ } ++ ret++; ++ offset++; ++ len--; ++ } ++ /* All done, drop cs if needed */ ++ if ((offset & 255) != 1) { ++ /* Drop cs */ ++ AND_REG(&cc->gpioout, ~mask); ++ if (!sflash_poll(cc, offset)) { ++ /* Flash rejected command */ ++ return -12; ++ } ++ } ++ } else { ++ ret = 1; ++ W_REG(&cc->flashaddress, offset); ++ W_REG(&cc->flashdata, *buf); ++ /* Page program */ ++ sflash_cmd(cc, SFLASH_ST_PP); ++ } ++ break; ++ case SFLASH_AT: ++ mask = sfl->blocksize - 1; ++ page = (offset & ~mask) << 1; ++ byte = offset & mask; ++ /* Read main memory page into buffer 1 */ ++ if (byte || len < sfl->blocksize) { ++ W_REG(&cc->flashaddress, page); ++ sflash_cmd(cc, SFLASH_AT_BUF1_LOAD); ++ /* 250 us for AT45DB321B */ ++ SPINWAIT(sflash_poll(cc, offset), 1000); ++ ASSERT(!sflash_poll(cc, offset)); ++ } ++ /* Write into buffer 1 */ ++ for (ret = 0; ret < len && byte < sfl->blocksize; ret++) { ++ W_REG(&cc->flashaddress, byte++); ++ W_REG(&cc->flashdata, *buf++); ++ sflash_cmd(cc, SFLASH_AT_BUF1_WRITE); ++ } ++ /* Write buffer 1 into main memory page */ ++ W_REG(&cc->flashaddress, page); ++ sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM); ++ break; ++ } ++ ++ return ret; ++} ++ ++/* Erase a region. Returns number of bytes scheduled for erasure. ++ * Caller should poll for completion. ++ */ ++int ++sflash_erase(chipcregs_t *cc, uint offset) ++{ ++ struct sflash *sfl; ++ ++ if (offset >= sflash.size) ++ return -22; ++ ++ sfl = &sflash; ++ switch (sfl->type) { ++ case SFLASH_ST: ++ sflash_cmd(cc, SFLASH_ST_WREN); ++ W_REG(&cc->flashaddress, offset); ++ sflash_cmd(cc, SFLASH_ST_SE); ++ return sfl->blocksize; ++ case SFLASH_AT: ++ W_REG(&cc->flashaddress, offset << 1); ++ sflash_cmd(cc, SFLASH_AT_PAGE_ERASE); ++ return sfl->blocksize; ++ } ++ ++ return 0; ++} ++ ++/* ++ * writes the appropriate range of flash, a NULL buf simply erases ++ * the region of flash ++ */ ++int ++sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf) ++{ ++ struct sflash *sfl; ++ uchar *block = NULL, *cur_ptr, *blk_ptr; ++ uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; ++ uint blk_offset, blk_len, copied; ++ int bytes, ret = 0; ++ ++ /* Check address range */ ++ if (len <= 0) ++ return 0; ++ ++ sfl = &sflash; ++ if ((offset + len) > sfl->size) ++ return -1; ++ ++ blocksize = sfl->blocksize; ++ mask = blocksize - 1; ++ ++ /* Allocate a block of mem */ ++ if (!(block = MALLOC(NULL, blocksize))) ++ return -1; ++ ++ while (len) { ++ /* Align offset */ ++ cur_offset = offset & ~mask; ++ cur_length = blocksize; ++ cur_ptr = block; ++ ++ remainder = blocksize - (offset & mask); ++ if (len < remainder) ++ cur_retlen = len; ++ else ++ cur_retlen = remainder; ++ ++ /* buf == NULL means erase only */ ++ if (buf) { ++ /* Copy existing data into holding block if necessary */ ++ if ((offset & mask) || (len < blocksize)) { ++ blk_offset = cur_offset; ++ blk_len = cur_length; ++ blk_ptr = cur_ptr; ++ ++ /* Copy entire block */ ++ while(blk_len) { ++ copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); ++ blk_offset += copied; ++ blk_len -= copied; ++ blk_ptr += copied; ++ } ++ } ++ ++ /* Copy input data into holding block */ ++ memcpy(cur_ptr + (offset & mask), buf, cur_retlen); ++ } ++ ++ /* Erase block */ ++ if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0) ++ goto done; ++ while (sflash_poll(cc, (uint) cur_offset)); ++ ++ /* buf == NULL means erase only */ ++ if (!buf) { ++ offset += cur_retlen; ++ len -= cur_retlen; ++ continue; ++ } ++ ++ /* Write holding block */ ++ while (cur_length > 0) { ++ if ((bytes = sflash_write(cc, ++ (uint) cur_offset, ++ (uint) cur_length, ++ (uchar *) cur_ptr)) < 0) { ++ ret = bytes; ++ goto done; ++ } ++ while (sflash_poll(cc, (uint) cur_offset)); ++ cur_offset += bytes; ++ cur_length -= bytes; ++ cur_ptr += bytes; ++ } ++ ++ offset += cur_retlen; ++ len -= cur_retlen; ++ buf += cur_retlen; ++ } ++ ++ ret = len; ++done: ++ if (block) ++ MFREE(NULL, block, blocksize); ++ return ret; ++} ++ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmdevs.h +--- linux-2.6.17/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmdevs.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,391 @@ ++/* ++ * Broadcom device-specific manifest constants. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _BCMDEVS_H ++#define _BCMDEVS_H ++ ++ ++/* Known PCI vendor Id's */ ++#define VENDOR_EPIGRAM 0xfeda ++#define VENDOR_BROADCOM 0x14e4 ++#define VENDOR_3COM 0x10b7 ++#define VENDOR_NETGEAR 0x1385 ++#define VENDOR_DIAMOND 0x1092 ++#define VENDOR_DELL 0x1028 ++#define VENDOR_HP 0x0e11 ++#define VENDOR_APPLE 0x106b ++ ++/* PCI Device Id's */ ++#define BCM4210_DEVICE_ID 0x1072 /* never used */ ++#define BCM4211_DEVICE_ID 0x4211 ++#define BCM4230_DEVICE_ID 0x1086 /* never used */ ++#define BCM4231_DEVICE_ID 0x4231 ++ ++#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ ++#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ ++#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ ++#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ ++ ++#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ ++#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ ++ ++#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ ++#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ ++ ++#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ ++#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ ++#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ ++#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ ++#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ ++#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ ++#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ ++#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ ++#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */ ++#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */ ++#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */ ++ ++#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ ++ ++#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */ ++#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */ ++#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */ ++#define BCM4610_ENET_ID 0x4613 /* 4610 enet */ ++#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */ ++#define BCM4610_USB_ID 0x4615 /* 4610 usb */ ++ ++#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ ++#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ ++#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ ++#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */ ++ ++#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ ++#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ ++ ++#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */ ++#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */ ++#define BCM4307_ENET_ID 0x4306 /* 4307 enet */ ++#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */ ++ ++#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */ ++#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ ++#define BCM4306_D11G_ID2 0x4325 ++#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ ++#define BCM4306_UART_ID 0x4322 /* 4306 uart */ ++#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ ++#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ ++ ++#define BCM4309_PKG_ID 1 /* 4309 package id */ ++ ++#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ ++#define BCM4303_PKG_ID 2 /* 4303 package id */ ++ ++#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */ ++#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */ ++#define BCM4310_UART_ID 0x4312 /* 4310 uart */ ++#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ ++#define BCM4310_USB_ID 0x4315 /* 4310 usb */ ++ ++#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */ ++#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */ ++ ++ ++#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ ++#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ ++ ++#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ ++ ++#define BCM4318_DEVICE_ID 0x4318 /* 4318 chip common chipid */ ++#define BCM4318_D11G_ID 0x4318 /* 4318 801.11b/g id */ ++#define BCM4318_D11DUAL_ID 0x4319 /* 4318 801.11a/b/g id */ ++#define BCM4318_JTAGM_ID 0x4331 /* 4318 jtagm device id */ ++ ++#define FPGA_JTAGM_ID 0x4330 /* ??? */ ++ ++/* Address map */ ++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ ++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ ++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ ++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ ++ ++/* Core register space */ ++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ ++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ ++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ ++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ ++#define BCM4710_REG_USB 0x18004000 /* USB core registers */ ++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ ++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ ++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ ++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ ++ ++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ ++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ ++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ ++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ ++#define BCM4710_PROG 0x1f800000 /* Programable interface */ ++#define BCM4710_FLASH 0x1fc00000 /* Flash */ ++ ++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) ++ ++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) ++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) ++ ++#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ ++#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ ++#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */ ++#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ ++#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */ ++ ++#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ ++ ++#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ ++#define BCM5350_DEVICE_ID 0x5350 /* bcm5350 chipcommon chipid */ ++#define BCM5352_DEVICE_ID 0x5352 /* bcm5352 chipcommon chipid */ ++ ++#define BCM4320_DEVICE_ID 0x4320 /* bcm4320 chipcommon chipid */ ++ ++/* PCMCIA vendor Id's */ ++ ++#define VENDOR_BROADCOM_PCMCIA 0x02d0 ++ ++/* SDIO vendor Id's */ ++#define VENDOR_BROADCOM_SDIO 0x00BF ++ ++ ++/* boardflags */ ++#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ ++#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ ++#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ ++#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */ ++#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ ++#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ ++#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */ ++#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ ++#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ ++#define BFL_FEM 0x0800 /* This board supports the Front End Module */ ++#define BFL_EXTLNA 0x1000 /* This board has an external LNA */ ++#define BFL_HGPA 0x2000 /* This board has a high gain PA */ ++#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */ ++#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */ ++ ++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ ++#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ ++#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */ ++#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */ ++#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ ++#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ ++#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ ++#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ ++#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ ++#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ ++#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ ++ ++/* Bus types */ ++#define SB_BUS 0 /* Silicon Backplane */ ++#define PCI_BUS 1 /* PCI target */ ++#define PCMCIA_BUS 2 /* PCMCIA target */ ++#define SDIO_BUS 3 /* SDIO target */ ++#define JTAG_BUS 4 /* JTAG */ ++ ++/* Allows optimization for single-bus support */ ++#ifdef BCMBUSTYPE ++#define BUSTYPE(bus) (BCMBUSTYPE) ++#else ++#define BUSTYPE(bus) (bus) ++#endif ++ ++/* power control defines */ ++#define PLL_DELAY 150 /* us pll on delay */ ++#define FREF_DELAY 200 /* us fref change delay */ ++#define MIN_SLOW_CLK 32 /* us Slow clock period */ ++#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ ++ ++/* Reference Board Types */ ++ ++#define BU4710_BOARD 0x0400 ++#define VSIM4710_BOARD 0x0401 ++#define QT4710_BOARD 0x0402 ++ ++#define BU4610_BOARD 0x0403 ++#define VSIM4610_BOARD 0x0404 ++ ++#define BU4307_BOARD 0x0405 ++#define BCM94301CB_BOARD 0x0406 ++#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */ ++#define BCM94301MP_BOARD 0x0407 ++#define BCM94307MP_BOARD 0x0408 ++#define BCMAP4307_BOARD 0x0409 ++ ++#define BU4309_BOARD 0x040a ++#define BCM94309CB_BOARD 0x040b ++#define BCM94309MP_BOARD 0x040c ++#define BCM4309AP_BOARD 0x040d ++ ++#define BCM94302MP_BOARD 0x040e ++ ++#define VSIM4310_BOARD 0x040f ++#define BU4711_BOARD 0x0410 ++#define BCM94310U_BOARD 0x0411 ++#define BCM94310AP_BOARD 0x0412 ++#define BCM94310MP_BOARD 0x0414 ++ ++#define BU4306_BOARD 0x0416 ++#define BCM94306CB_BOARD 0x0417 ++#define BCM94306MP_BOARD 0x0418 ++ ++#define BCM94710D_BOARD 0x041a ++#define BCM94710R1_BOARD 0x041b ++#define BCM94710R4_BOARD 0x041c ++#define BCM94710AP_BOARD 0x041d ++ ++ ++#define BU2050_BOARD 0x041f ++ ++ ++#define BCM94309G_BOARD 0x0421 ++ ++#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */ ++ ++#define BU4704_BOARD 0x0423 ++#define BU4702_BOARD 0x0424 ++ ++#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ ++ ++#define BU4317_BOARD 0x0426 ++ ++ ++#define BCM94702MN_BOARD 0x0428 ++ ++/* BCM4702 1U CompactPCI Board */ ++#define BCM94702CPCI_BOARD 0x0429 ++ ++/* BCM4702 with BCM95380 VLAN Router */ ++#define BCM95380RR_BOARD 0x042a ++ ++/* cb4306 with SiGe PA */ ++#define BCM94306CBSG_BOARD 0x042b ++ ++/* mp4301 with 2050 radio */ ++#define BCM94301MPL_BOARD 0x042c ++ ++/* cb4306 with SiGe PA */ ++#define PCSG94306_BOARD 0x042d ++ ++/* bu4704 with sdram */ ++#define BU4704SD_BOARD 0x042e ++ ++/* Dual 11a/11g Router */ ++#define BCM94704AGR_BOARD 0x042f ++ ++/* 11a-only minipci */ ++#define BCM94308MP_BOARD 0x0430 ++ ++ ++ ++/* BCM94317 boards */ ++#define BCM94317CB_BOARD 0x0440 ++#define BCM94317MP_BOARD 0x0441 ++#define BCM94317PCMCIA_BOARD 0x0442 ++#define BCM94317SDIO_BOARD 0x0443 ++ ++#define BU4712_BOARD 0x0444 ++#define BU4712SD_BOARD 0x045d ++#define BU4712L_BOARD 0x045f ++ ++/* BCM4712 boards */ ++#define BCM94712AP_BOARD 0x0445 ++#define BCM94712P_BOARD 0x0446 ++ ++/* BCM4318 boards */ ++#define BU4318_BOARD 0x0447 ++#define CB4318_BOARD 0x0448 ++#define MPG4318_BOARD 0x0449 ++#define MP4318_BOARD 0x044a ++#define SD4318_BOARD 0x044b ++ ++/* BCM63XX boards */ ++#define BCM96338_BOARD 0x6338 ++#define BCM96345_BOARD 0x6345 ++#define BCM96348_BOARD 0x6348 ++ ++/* Another mp4306 with SiGe */ ++#define BCM94306P_BOARD 0x044c ++ ++/* CF-like 4317 modules */ ++#define BCM94317CF_BOARD 0x044d ++ ++/* mp4303 */ ++#define BCM94303MP_BOARD 0x044e ++ ++/* mpsgh4306 */ ++#define BCM94306MPSGH_BOARD 0x044f ++ ++/* BRCM 4306 w/ Front End Modules */ ++#define BCM94306MPM 0x0450 ++#define BCM94306MPL 0x0453 ++ ++/* 4712agr */ ++#define BCM94712AGR_BOARD 0x0451 ++ ++/* The real CF 4317 board */ ++#define CFI4317_BOARD 0x0452 ++ ++/* pcmcia 4303 */ ++#define PC4303_BOARD 0x0454 ++ ++/* 5350K */ ++#define BCM95350K_BOARD 0x0455 ++ ++/* 5350R */ ++#define BCM95350R_BOARD 0x0456 ++ ++/* 4306mplna */ ++#define BCM94306MPLNA_BOARD 0x0457 ++ ++/* 4320 boards */ ++#define BU4320_BOARD 0x0458 ++#define BU4320S_BOARD 0x0459 ++#define BCM94320PH_BOARD 0x045a ++ ++/* 4306mph */ ++#define BCM94306MPH_BOARD 0x045b ++ ++/* 4306pciv */ ++#define BCM94306PCIV_BOARD 0x045c ++ ++#define BU4712SD_BOARD 0x045d ++ ++#define BCM94320PFLSH_BOARD 0x045e ++ ++#define BU4712L_BOARD 0x045f ++#define BCM94712LGR_BOARD 0x0460 ++#define BCM94320R_BOARD 0x0461 ++ ++#define BU5352_BOARD 0x0462 ++ ++#define BCM94318MPGH_BOARD 0x0463 ++ ++ ++#define BCM95352GR_BOARD 0x0467 ++ ++/* bcm95351agr */ ++#define BCM95351AGR_BOARD 0x0470 ++ ++/* # of GPIO pins */ ++#define GPIO_NUMPINS 16 ++ ++#endif /* _BCMDEVS_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmendian.h +--- linux-2.6.17/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmendian.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,152 @@ ++/* ++ * local version of endian.h - byte order defines ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++*/ ++ ++#ifndef _BCMENDIAN_H_ ++#define _BCMENDIAN_H_ ++ ++#include <typedefs.h> ++ ++/* Byte swap a 16 bit value */ ++#define BCMSWAP16(val) \ ++ ((uint16)( \ ++ (((uint16)(val) & (uint16)0x00ffU) << 8) | \ ++ (((uint16)(val) & (uint16)0xff00U) >> 8) )) ++ ++/* Byte swap a 32 bit value */ ++#define BCMSWAP32(val) \ ++ ((uint32)( \ ++ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \ ++ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ ++ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ ++ (((uint32)(val) & (uint32)0xff000000UL) >> 24) )) ++ ++/* 2 Byte swap a 32 bit value */ ++#define BCMSWAP32BY16(val) \ ++ ((uint32)( \ ++ (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \ ++ (((uint32)(val) & (uint32)0xffff0000UL) >> 16) )) ++ ++ ++static INLINE uint16 ++bcmswap16(uint16 val) ++{ ++ return BCMSWAP16(val); ++} ++ ++static INLINE uint32 ++bcmswap32(uint32 val) ++{ ++ return BCMSWAP32(val); ++} ++ ++static INLINE uint32 ++bcmswap32by16(uint32 val) ++{ ++ return BCMSWAP32BY16(val); ++} ++ ++/* buf - start of buffer of shorts to swap */ ++/* len - byte length of buffer */ ++static INLINE void ++bcmswap16_buf(uint16 *buf, uint len) ++{ ++ len = len/2; ++ ++ while(len--){ ++ *buf = bcmswap16(*buf); ++ buf++; ++ } ++} ++ ++#ifndef hton16 ++#ifndef IL_BIGENDIAN ++#define HTON16(i) BCMSWAP16(i) ++#define hton16(i) bcmswap16(i) ++#define hton32(i) bcmswap32(i) ++#define ntoh16(i) bcmswap16(i) ++#define ntoh32(i) bcmswap32(i) ++#define ltoh16(i) (i) ++#define ltoh32(i) (i) ++#define htol16(i) (i) ++#define htol32(i) (i) ++#else ++#define HTON16(i) (i) ++#define hton16(i) (i) ++#define hton32(i) (i) ++#define ntoh16(i) (i) ++#define ntoh32(i) (i) ++#define ltoh16(i) bcmswap16(i) ++#define ltoh32(i) bcmswap32(i) ++#define htol16(i) bcmswap16(i) ++#define htol32(i) bcmswap32(i) ++#endif ++#endif ++ ++#ifndef IL_BIGENDIAN ++#define ltoh16_buf(buf, i) ++#define htol16_buf(buf, i) ++#else ++#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#endif ++ ++/* ++* load 16-bit value from unaligned little endian byte array. ++*/ ++static INLINE uint16 ++ltoh16_ua(uint8 *bytes) ++{ ++ return (bytes[1]<<8)+bytes[0]; ++} ++ ++/* ++* load 32-bit value from unaligned little endian byte array. ++*/ ++static INLINE uint32 ++ltoh32_ua(uint8 *bytes) ++{ ++ return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0]; ++} ++ ++/* ++* load 16-bit value from unaligned big(network) endian byte array. ++*/ ++static INLINE uint16 ++ntoh16_ua(uint8 *bytes) ++{ ++ return (bytes[0]<<8)+bytes[1]; ++} ++ ++/* ++* load 32-bit value from unaligned big(network) endian byte array. ++*/ ++static INLINE uint32 ++ntoh32_ua(uint8 *bytes) ++{ ++ return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3]; ++} ++ ++#define ltoh_ua(ptr) ( \ ++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ ++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \ ++ (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \ ++) ++ ++#define ntoh_ua(ptr) ( \ ++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ ++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \ ++ (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \ ++) ++ ++#endif /* _BCMENDIAN_H_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmnvram.h +--- linux-2.6.17/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmnvram.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,95 @@ ++/* ++ * NVRAM variable manipulation ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _bcmnvram_h_ ++#define _bcmnvram_h_ ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++#include <typedefs.h> ++ ++struct nvram_header { ++ uint32 magic; ++ uint32 len; ++ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ ++ uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ ++ uint32 config_ncdl; /* ncdl values for memc */ ++}; ++ ++struct nvram_tuple { ++ char *name; ++ char *value; ++ struct nvram_tuple *next; ++}; ++ ++/* ++ * Get the value of an NVRAM variable. The pointer returned may be ++ * invalid after a set. ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined ++ */ ++extern char * __init early_nvram_get(const char *name); ++ ++/* ++ * Get the value of an NVRAM variable. The pointer returned may be ++ * invalid after a set. ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined ++ */ ++extern char *nvram_get(const char *name); ++ ++/* ++ * Get the value of an NVRAM variable. ++ * @param name name of variable to get ++ * @return value of variable or NUL if undefined ++ */ ++#define nvram_safe_get(name) (BCMINIT(early_nvram_get)(name) ? : "") ++ ++/* ++ * Match an NVRAM variable. ++ * @param name name of variable to match ++ * @param match value to compare against value of variable ++ * @return TRUE if variable is defined and its value is string equal ++ * to match or FALSE otherwise ++ */ ++static inline int ++nvram_match(char *name, char *match) { ++ const char *value = BCMINIT(early_nvram_get)(name); ++ return (value && !strcmp(value, match)); ++} ++ ++/* ++ * Inversely match an NVRAM variable. ++ * @param name name of variable to match ++ * @param match value to compare against value of variable ++ * @return TRUE if variable is defined and its value is not string ++ * equal to invmatch or FALSE otherwise ++ */ ++static inline int ++nvram_invmatch(char *name, char *invmatch) { ++ const char *value = BCMINIT(early_nvram_get)(name); ++ return (value && strcmp(value, invmatch)); ++} ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ ++#define NVRAM_VERSION 1 ++#define NVRAM_HEADER_SIZE 20 ++#define NVRAM_SPACE 0x8000 ++ ++#define NVRAM_MAX_VALUE_LEN 255 ++#define NVRAM_MAX_PARAM_LEN 64 ++ ++#endif /* _bcmnvram_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmsrom.h +--- linux-2.6.17/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmsrom.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,23 @@ ++/* ++ * Misc useful routines to access NIC local SROM/OTP . ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _bcmsrom_h_ ++#define _bcmsrom_h_ ++ ++extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, int *count); ++ ++extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); ++extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); ++ ++#endif /* _bcmsrom_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmutils.h +--- linux-2.6.17/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/bcmutils.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,308 @@ ++/* ++ * Misc useful os-independent macros and functions. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _bcmutils_h_ ++#define _bcmutils_h_ ++ ++/*** driver-only section ***/ ++#include <osl.h> ++ ++#define _BCM_U 0x01 /* upper */ ++#define _BCM_L 0x02 /* lower */ ++#define _BCM_D 0x04 /* digit */ ++#define _BCM_C 0x08 /* cntrl */ ++#define _BCM_P 0x10 /* punct */ ++#define _BCM_S 0x20 /* white space (space/lf/tab) */ ++#define _BCM_X 0x40 /* hex digit */ ++#define _BCM_SP 0x80 /* hard space (0x20) */ ++ ++#define GPIO_PIN_NOTDEFINED 0x20 ++ ++extern unsigned char bcm_ctype[]; ++#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) ++ ++#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) ++#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) ++#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) ++#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) ++#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) ++#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) ++#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) ++#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) ++#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) ++#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) ++#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) ++ ++/* ++ * Spin at most 'us' microseconds while 'exp' is true. ++ * Caller should explicitly test 'exp' when this completes ++ * and take appropriate error action if 'exp' is still true. ++ */ ++#define SPINWAIT(exp, us) { \ ++ uint countdown = (us) + 9; \ ++ while ((exp) && (countdown >= 10)) {\ ++ OSL_DELAY(10); \ ++ countdown -= 10; \ ++ } \ ++} ++ ++/* generic osl packet queue */ ++struct pktq { ++ void *head; /* first packet to dequeue */ ++ void *tail; /* last packet to dequeue */ ++ uint len; /* number of queued packets */ ++ uint maxlen; /* maximum number of queued packets */ ++ bool priority; /* enqueue by packet priority */ ++ uint8 prio_map[MAXPRIO+1]; /* user priority to packet enqueue policy map */ ++}; ++#define DEFAULT_QLEN 128 ++ ++#define pktq_len(q) ((q)->len) ++#define pktq_avail(q) ((q)->maxlen - (q)->len) ++#define pktq_head(q) ((q)->head) ++#define pktq_full(q) ((q)->len >= (q)->maxlen) ++#define _pktq_pri(q, pri) ((q)->prio_map[pri]) ++#define pktq_tailpri(q) ((q)->tail ? _pktq_pri(q, PKTPRIO((q)->tail)) : _pktq_pri(q, 0)) ++ ++/* externs */ ++/* packet */ ++extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf); ++extern uint pkttotlen(osl_t *osh, void *); ++extern void pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[]); ++extern void pktenq(struct pktq *q, void *p, bool lifo); ++extern void *pktdeq(struct pktq *q); ++extern void *pktdeqtail(struct pktq *q); ++/* string */ ++extern uint bcm_atoi(char *s); ++extern uchar bcm_toupper(uchar c); ++extern ulong bcm_strtoul(char *cp, char **endp, uint base); ++extern char *bcmstrstr(char *haystack, char *needle); ++extern char *bcmstrcat(char *dest, const char *src); ++extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen); ++/* ethernet address */ ++extern char *bcm_ether_ntoa(char *ea, char *buf); ++extern int bcm_ether_atoe(char *p, char *ea); ++/* delay */ ++extern void bcm_mdelay(uint ms); ++/* variable access */ ++extern char *getvar(char *vars, char *name); ++extern int getintvar(char *vars, char *name); ++extern uint getgpiopin(char *vars, char *pin_name, uint def_pin); ++#define bcmlog(fmt, a1, a2) ++#define bcmdumplog(buf, size) *buf = '\0' ++#define bcmdumplogent(buf, idx) -1 ++ ++/*** driver/apps-shared section ***/ ++ ++#define BCME_STRLEN 64 ++#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST)) ++ ++ ++/* ++ * error codes could be added but the defined ones shouldn't be changed/deleted ++ * these error codes are exposed to the user code ++ * when ever a new error code is added to this list ++ * please update errorstring table with the related error string and ++ * update osl files with os specific errorcode map ++*/ ++ ++#define BCME_ERROR -1 /* Error generic */ ++#define BCME_BADARG -2 /* Bad Argument */ ++#define BCME_BADOPTION -3 /* Bad option */ ++#define BCME_NOTUP -4 /* Not up */ ++#define BCME_NOTDOWN -5 /* Not down */ ++#define BCME_NOTAP -6 /* Not AP */ ++#define BCME_NOTSTA -7 /* Not STA */ ++#define BCME_BADKEYIDX -8 /* BAD Key Index */ ++#define BCME_RADIOOFF -9 /* Radio Off */ ++#define BCME_NOTBANDLOCKED -10 /* Not bandlocked */ ++#define BCME_NOCLK -11 /* No Clock*/ ++#define BCME_BADRATESET -12 /* BAD RateSet*/ ++#define BCME_BADBAND -13 /* BAD Band */ ++#define BCME_BUFTOOSHORT -14 /* Buffer too short */ ++#define BCME_BUFTOOLONG -15 /* Buffer too Long */ ++#define BCME_BUSY -16 /* Busy*/ ++#define BCME_NOTASSOCIATED -17 /* Not associated*/ ++#define BCME_BADSSIDLEN -18 /* BAD SSID Len */ ++#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel*/ ++#define BCME_BADCHAN -20 /* BAD Channel */ ++#define BCME_BADADDR -21 /* BAD Address*/ ++#define BCME_NORESOURCE -22 /* No resources*/ ++#define BCME_UNSUPPORTED -23 /* Unsupported*/ ++#define BCME_BADLEN -24 /* Bad Length*/ ++#define BCME_NOTREADY -25 /* Not ready Yet*/ ++#define BCME_EPERM -26 /* Not Permitted */ ++#define BCME_NOMEM -27 /* No Memory */ ++#define BCME_ASSOCIATED -28 /* Associated */ ++#define BCME_RANGE -29 /* Range Error*/ ++#define BCME_NOTFOUND -30 /* Not found */ ++#define BCME_LAST BCME_NOTFOUND ++ ++#ifndef ABS ++#define ABS(a) (((a)<0)?-(a):(a)) ++#endif ++ ++#ifndef MIN ++#define MIN(a, b) (((a)<(b))?(a):(b)) ++#endif ++ ++#ifndef MAX ++#define MAX(a, b) (((a)>(b))?(a):(b)) ++#endif ++ ++#define CEIL(x, y) (((x) + ((y)-1)) / (y)) ++#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) ++#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0) ++#define ISPOWEROF2(x) ((((x)-1)&(x))==0) ++#define VALID_MASK(mask) !((mask) & ((mask) + 1)) ++#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member) ++#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) ++ ++/* bit map related macros */ ++#ifndef setbit ++#define NBBY 8 /* 8 bits per byte */ ++#define setbit(a,i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY)) ++#define clrbit(a,i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) ++#define isset(a,i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) ++#define isclr(a,i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) ++#endif ++ ++#define NBITS(type) (sizeof(type) * 8) ++#define NBITVAL(bits) (1 << (bits)) ++#define MAXBITVAL(bits) ((1 << (bits)) - 1) ++ ++/* crc defines */ ++#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ ++#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ ++#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ ++#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ ++ ++/* bcm_format_flags() bit description structure */ ++typedef struct bcm_bit_desc { ++ uint32 bit; ++ char* name; ++} bcm_bit_desc_t; ++ ++/* tag_ID/length/value_buffer tuple */ ++typedef struct bcm_tlv { ++ uint8 id; ++ uint8 len; ++ uint8 data[1]; ++} bcm_tlv_t; ++ ++/* Check that bcm_tlv_t fits into the given buflen */ ++#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len)) ++ ++/* buffer length for ethernet address from bcm_ether_ntoa() */ ++#define ETHER_ADDR_STR_LEN 18 ++ ++/* unaligned load and store macros */ ++#ifdef IL_BIGENDIAN ++static INLINE uint32 ++load32_ua(uint8 *a) ++{ ++ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]); ++} ++ ++static INLINE void ++store32_ua(uint8 *a, uint32 v) ++{ ++ a[0] = (v >> 24) & 0xff; ++ a[1] = (v >> 16) & 0xff; ++ a[2] = (v >> 8) & 0xff; ++ a[3] = v & 0xff; ++} ++ ++static INLINE uint16 ++load16_ua(uint8 *a) ++{ ++ return ((a[0] << 8) | a[1]); ++} ++ ++static INLINE void ++store16_ua(uint8 *a, uint16 v) ++{ ++ a[0] = (v >> 8) & 0xff; ++ a[1] = v & 0xff; ++} ++ ++#else ++ ++static INLINE uint32 ++load32_ua(uint8 *a) ++{ ++ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]); ++} ++ ++static INLINE void ++store32_ua(uint8 *a, uint32 v) ++{ ++ a[3] = (v >> 24) & 0xff; ++ a[2] = (v >> 16) & 0xff; ++ a[1] = (v >> 8) & 0xff; ++ a[0] = v & 0xff; ++} ++ ++static INLINE uint16 ++load16_ua(uint8 *a) ++{ ++ return ((a[1] << 8) | a[0]); ++} ++ ++static INLINE void ++store16_ua(uint8 *a, uint16 v) ++{ ++ a[1] = (v >> 8) & 0xff; ++ a[0] = v & 0xff; ++} ++ ++#endif ++ ++/* externs */ ++/* crc */ ++extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc); ++/* format/print */ ++/* IE parsing */ ++extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); ++extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); ++extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); ++ ++/* bcmerror*/ ++extern const char *bcmerrorstr(int bcmerror); ++ ++/* multi-bool data type: set of bools, mbool is true if any is set */ ++typedef uint32 mbool; ++#define mboolset(mb, bit) (mb |= bit) /* set one bool */ ++#define mboolclr(mb, bit) (mb &= ~bit) /* clear one bool */ ++#define mboolisset(mb, bit) ((mb & bit) != 0) /* TRUE if one bool is set */ ++#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) ++ ++/* power conversion */ ++extern uint16 bcm_qdbm_to_mw(uint8 qdbm); ++extern uint8 bcm_mw_to_qdbm(uint16 mw); ++ ++/* generic datastruct to help dump routines */ ++struct fielddesc { ++ char *nameandfmt; ++ uint32 offset; ++ uint32 len; ++}; ++ ++typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset); ++extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, char *buf, uint32 bufsize); ++ ++extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len); ++ ++#endif /* _bcmutils_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/bitfuncs.h +--- linux-2.6.17/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/bitfuncs.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,85 @@ ++/* ++ * bit manipulation utility functions ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _BITFUNCS_H ++#define _BITFUNCS_H ++ ++#include <typedefs.h> ++ ++/* local prototypes */ ++static INLINE uint32 find_msbit(uint32 x); ++ ++ ++/* ++ * find_msbit: returns index of most significant set bit in x, with index ++ * range defined as 0-31. NOTE: returns zero if input is zero. ++ */ ++ ++#if defined(USE_PENTIUM_BSR) && defined(__GNUC__) ++ ++/* ++ * Implementation for Pentium processors and gcc. Note that this ++ * instruction is actually very slow on some processors (e.g., family 5, ++ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic ++ * implementation instead. ++ */ ++static INLINE uint32 find_msbit(uint32 x) ++{ ++ uint msbit; ++ __asm__("bsrl %1,%0" ++ :"=r" (msbit) ++ :"r" (x)); ++ return msbit; ++} ++ ++#else ++ ++/* ++ * Generic Implementation ++ */ ++ ++#define DB_POW_MASK16 0xffff0000 ++#define DB_POW_MASK8 0x0000ff00 ++#define DB_POW_MASK4 0x000000f0 ++#define DB_POW_MASK2 0x0000000c ++#define DB_POW_MASK1 0x00000002 ++ ++static INLINE uint32 find_msbit(uint32 x) ++{ ++ uint32 temp_x = x; ++ uint msbit = 0; ++ if (temp_x & DB_POW_MASK16) { ++ temp_x >>= 16; ++ msbit = 16; ++ } ++ if (temp_x & DB_POW_MASK8) { ++ temp_x >>= 8; ++ msbit += 8; ++ } ++ if (temp_x & DB_POW_MASK4) { ++ temp_x >>= 4; ++ msbit += 4; ++ } ++ if (temp_x & DB_POW_MASK2) { ++ temp_x >>= 2; ++ msbit += 2; ++ } ++ if (temp_x & DB_POW_MASK1) { ++ msbit += 1; ++ } ++ return(msbit); ++} ++ ++#endif ++ ++#endif /* _BITFUNCS_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/flash.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/flash.h +--- linux-2.6.17/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/flash.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,188 @@ ++/* ++ * flash.h: Common definitions for flash access. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++/* Types of flashes we know about */ ++typedef enum _flash_type {OLD, BSC, SCS, AMD, SST, SFLASH} flash_type_t; ++ ++/* Commands to write/erase the flases */ ++typedef struct _flash_cmds{ ++ flash_type_t type; ++ bool need_unlock; ++ uint16 pre_erase; ++ uint16 erase_block; ++ uint16 erase_chip; ++ uint16 write_word; ++ uint16 write_buf; ++ uint16 clear_csr; ++ uint16 read_csr; ++ uint16 read_id; ++ uint16 confirm; ++ uint16 read_array; ++} flash_cmds_t; ++ ++#define UNLOCK_CMD_WORDS 2 ++ ++typedef struct _unlock_cmd { ++ uint addr[UNLOCK_CMD_WORDS]; ++ uint16 cmd[UNLOCK_CMD_WORDS]; ++} unlock_cmd_t; ++ ++/* Flash descriptors */ ++typedef struct _flash_desc { ++ uint16 mfgid; /* Manufacturer Id */ ++ uint16 devid; /* Device Id */ ++ uint size; /* Total size in bytes */ ++ uint width; /* Device width in bytes */ ++ flash_type_t type; /* Device type old, S, J */ ++ uint bsize; /* Block size */ ++ uint nb; /* Number of blocks */ ++ uint ff; /* First full block */ ++ uint lf; /* Last full block */ ++ uint nsub; /* Number of subblocks */ ++ uint *subblocks; /* Offsets for subblocks */ ++ char *desc; /* Description */ ++} flash_desc_t; ++ ++ ++#ifdef DECLARE_FLASHES ++flash_cmds_t sflash_cmd_t = ++ { SFLASH, 0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; ++ ++flash_cmds_t flash_cmds[] = { ++/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */ ++ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff }, ++ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff }, ++ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, ++ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, ++ { 0 } ++}; ++ ++unlock_cmd_t unlock_cmd_amd = { ++#ifdef MIPSEB ++/* addr: */ { 0x0aa8, 0x0556}, ++#else ++/* addr: */ { 0x0aaa, 0x0554}, ++#endif ++/* data: */ { 0xaa, 0x55} ++}; ++ ++unlock_cmd_t unlock_cmd_sst = { ++#ifdef MIPSEB ++/* addr: */ { 0xaaa8, 0x5556}, ++#else ++/* addr: */ { 0xaaaa, 0x5554}, ++#endif ++/* data: */ { 0xaa, 0x55} ++}; ++ ++#define AMD_CMD 0xaaa ++#define SST_CMD 0xaaaa ++ ++/* intel unlock block cmds */ ++#define INTEL_UNLOCK1 0x60 ++#define INTEL_UNLOCK2 0xD0 ++ ++/* Just eight blocks of 8KB byte each */ ++ ++uint blk8x8k[] = { 0x00000000, ++ 0x00002000, ++ 0x00004000, ++ 0x00006000, ++ 0x00008000, ++ 0x0000a000, ++ 0x0000c000, ++ 0x0000e000, ++ 0x00010000 ++}; ++ ++/* Funky AMD arrangement for 29xx800's */ ++uint amd800[] = { 0x00000000, /* 16KB */ ++ 0x00004000, /* 32KB */ ++ 0x0000c000, /* 8KB */ ++ 0x0000e000, /* 8KB */ ++ 0x00010000, /* 8KB */ ++ 0x00012000, /* 8KB */ ++ 0x00014000, /* 32KB */ ++ 0x0001c000, /* 16KB */ ++ 0x00020000 ++}; ++ ++/* AMD arrangement for 29xx160's */ ++uint amd4112[] = { 0x00000000, /* 32KB */ ++ 0x00008000, /* 8KB */ ++ 0x0000a000, /* 8KB */ ++ 0x0000c000, /* 16KB */ ++ 0x00010000 ++}; ++uint amd2114[] = { 0x00000000, /* 16KB */ ++ 0x00004000, /* 8KB */ ++ 0x00006000, /* 8KB */ ++ 0x00008000, /* 32KB */ ++ 0x00010000 ++}; ++ ++ ++flash_desc_t sflash_desc = ++ { 0, 0, 0, 0, SFLASH, 0, 0, 0, 0, 0, NULL, "SFLASH" }; ++ ++flash_desc_t flashes[] = { ++ { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" }, ++ { 0x00b0, 0x00d4, 0x0400000, 2, SCS, 0x10000, 64, 0, 63, 0, NULL, "Intel 28F320S3/5 2Mx16" }, ++ { 0x0089, 0x8890, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" }, ++ { 0x0089, 0x8891, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" }, ++ { 0x0089, 0x8896, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" }, ++ { 0x0089, 0x8897, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" }, ++ { 0x0089, 0x8898, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" }, ++ { 0x0089, 0x8899, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" }, ++ { 0x0089, 0x88C2, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" }, ++ { 0x0089, 0x88C3, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" }, ++ { 0x0089, 0x88C4, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" }, ++ { 0x0089, 0x88C5, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" }, ++ { 0x0089, 0x88CC, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" }, ++ { 0x0089, 0x88CD, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" }, ++ { 0x0089, 0x0014, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J5 2Mx16" }, ++ { 0x0089, 0x0015, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J5 4Mx16" }, ++ { 0x0089, 0x0016, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J3 2Mx16" }, ++ { 0x0089, 0x0017, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J3 4Mx16" }, ++ { 0x0089, 0x0018, 0x1000000, 2, SCS, 0x20000, 128, 0, 127, 0, NULL, "Intel 28F128J3 8Mx16" }, ++ { 0x00b0, 0x00e3, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" }, ++ { 0x0001, 0x224a, 0x0100000, 2, AMD, 0x10000, 16, 0, 13, 8, amd800, "AMD 29DL800BT 512Kx16 TopB" }, ++ { 0x0001, 0x22cb, 0x0100000, 2, AMD, 0x10000, 16, 2, 15, 8, amd800, "AMD 29DL800BB 512Kx16 BotB" }, ++ { 0x0001, 0x22c4, 0x0200000, 2, AMD, 0x10000, 32, 0, 30, 4, amd2114, "AMD 29lv160DT 1Mx16 TopB" }, ++ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" }, ++ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" }, ++ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" }, ++ { 0x0001, 0x227e, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" }, ++ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" }, ++ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" }, ++ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" }, ++ { 0x00C2, 0x00A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, ++ { 0x00C2, 0x00A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, ++ { 0x0004, 0x22F6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MBM29LV320TE 2Mx16 TopB" }, ++ { 0x0004, 0x22F9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MBM29LV320BE 2Mx16 BotB" }, ++ { 0x0098, 0x009A, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "TC58FVT321 2Mx16 TopB" }, ++ { 0x0098, 0x009C, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "TC58FVB321 2Mx16 BotB" }, ++ { 0x00C2, 0x22A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, ++ { 0x00C2, 0x22A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, ++ { 0x00BF, 0x2783, 0x0400000, 2, SST, 0x10000, 64, 0, 63, 0, NULL, "SST39VF320 2Mx16" }, ++ { 0, 0, 0, 0, OLD, 0, 0, 0, 0, 0, NULL, NULL }, ++}; ++ ++#else ++ ++extern flash_cmds_t flash_cmds[]; ++extern unlock_cmd_t unlock_cmd; ++extern flash_desc_t flashes[]; ++ ++#endif +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/flashutl.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/flashutl.h +--- linux-2.6.17/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/flashutl.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,27 @@ ++/* ++ * BCM47XX FLASH driver interface ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _flashutl_h_ ++#define _flashutl_h_ ++ ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++int sysFlashInit(char *flash_str); ++int sysFlashRead(uint off, uchar *dst, uint bytes); ++int sysFlashWrite(uint off, uchar *src, uint bytes); ++void nvWrite(unsigned short *data, unsigned int len); ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++#endif /* _flashutl_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/hndmips.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/hndmips.h +--- linux-2.6.17/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/hndmips.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,16 @@ ++/* ++ * Alternate include file for HND sbmips.h since CFE also ships with ++ * a sbmips.h. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include "sbmips.h" +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/linux_osl.h +--- linux-2.6.17/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/linux_osl.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,331 @@ ++/* ++ * Linux OS Independent Layer ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _linux_osl_h_ ++#define _linux_osl_h_ ++ ++#include <typedefs.h> ++ ++/* use current 2.4.x calling conventions */ ++#include <linuxver.h> ++ ++/* assert and panic */ ++#ifdef __GNUC__ ++#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) ++#if GCC_VERSION > 30100 ++#define ASSERT(exp) do {} while (0) ++#else ++/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/ ++#define ASSERT(exp) ++#endif ++#endif ++ ++/* microsecond delay */ ++#define OSL_DELAY(usec) osl_delay(usec) ++extern void osl_delay(uint usec); ++ ++/* PCI configuration space access macros */ ++#define OSL_PCI_READ_CONFIG(osh, offset, size) \ ++ osl_pci_read_config((osh), (offset), (size)) ++#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \ ++ osl_pci_write_config((osh), (offset), (size), (val)) ++extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset); ++extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val); ++ ++/* PCI device bus # and slot # */ ++#define OSL_PCI_BUS(osh) osl_pci_bus(osh) ++#define OSL_PCI_SLOT(osh) osl_pci_slot(osh) ++extern uint osl_pci_bus(osl_t *osh); ++extern uint osl_pci_slot(osl_t *osh); ++ ++/* OSL initialization */ ++extern osl_t *osl_attach(void *pdev); ++extern void osl_detach(osl_t *osh); ++ ++/* host/bus architecture-specific byte swap */ ++#define BUS_SWAP32(v) (v) ++ ++/* general purpose memory allocation */ ++ ++#define MALLOC(osh, size) kmalloc(size, GFP_ATOMIC) ++#define MFREE(osh, addr, size) kfree(addr); ++ ++#define MALLOC_FAILED(osh) osl_malloc_failed((osh)) ++ ++extern void *osl_malloc(osl_t *osh, uint size); ++extern void osl_mfree(osl_t *osh, void *addr, uint size); ++extern uint osl_malloced(osl_t *osh); ++extern uint osl_malloc_failed(osl_t *osh); ++ ++/* allocate/free shared (dma-able) consistent memory */ ++#define DMA_CONSISTENT_ALIGN PAGE_SIZE ++#define DMA_ALLOC_CONSISTENT(osh, size, pap) \ ++ osl_dma_alloc_consistent((osh), (size), (pap)) ++#define DMA_FREE_CONSISTENT(osh, va, size, pa) \ ++ osl_dma_free_consistent((osh), (void*)(va), (size), (pa)) ++extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap); ++extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa); ++ ++/* map/unmap direction */ ++#define DMA_TX 1 ++#define DMA_RX 2 ++ ++/* register access macros */ ++#if defined(BCMJTAG) ++#include <bcmjtag.h> ++#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r))) ++#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r))) ++#endif ++ ++/* ++ * BINOSL selects the slightly slower function-call-based binary compatible osl. ++ * Macros expand to calls to functions defined in linux_osl.c . ++ */ ++#ifndef BINOSL ++ ++/* string library, kernel mode */ ++#define printf(fmt, args...) printk(fmt, ## args) ++#include <linux/kernel.h> ++#include <linux/string.h> ++ ++/* register access macros */ ++#if !defined(BCMJTAG) ++#ifndef IL_BIGENDIAN ++#define R_REG(r) ( \ ++ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ ++ readl((volatile uint32*)(r)) \ ++) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#else /* IL_BIGENDIAN */ ++#define R_REG(r) ({ \ ++ __typeof(*(r)) __osl_v; \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \ ++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ ++ } \ ++ __osl_v; \ ++}) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#endif ++#endif ++ ++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) ++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++ ++/* bcopy, bcmp, and bzero */ ++#define bcopy(src, dst, len) memcpy((dst), (src), (len)) ++#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) ++#define bzero(b, len) memset((b), '\0', (len)) ++ ++/* uncached virtual address */ ++#ifdef mips ++#define OSL_UNCACHED(va) KSEG1ADDR((va)) ++#include <asm/addrspace.h> ++#else ++#define OSL_UNCACHED(va) (va) ++#endif ++ ++/* get processor cycle count */ ++#if defined(mips) ++#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2) ++#elif defined(__i386__) ++#define OSL_GETCYCLES(x) rdtscl((x)) ++#else ++#define OSL_GETCYCLES(x) ((x) = 0) ++#endif ++ ++/* dereference an address that may cause a bus exception */ ++#ifdef mips ++#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17)) ++#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module") ++#else ++#define BUSPROBE(val, addr) get_dbe((val), (addr)) ++#include <asm/paccess.h> ++#endif ++#else ++#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; }) ++#endif ++ ++/* map/unmap physical to virtual I/O */ ++#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) ++#define REG_UNMAP(va) iounmap((void *)(va)) ++ ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) memset((r), '\0', (len)) ++ ++/* packet primitives */ ++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) ++#define PKTFREE(osh, skb, send) osl_pktfree((skb)) ++#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data) ++#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len) ++#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head)) ++#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) ++#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next) ++#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) ++#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) ++#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) ++#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) ++#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) ++#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) ++#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) ++#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) ++#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) ++#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority) ++#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x)) ++extern void *osl_pktget(osl_t *osh, uint len, bool send); ++extern void osl_pktfree(void *skb); ++ ++#else /* BINOSL */ ++ ++/* string library */ ++#ifndef LINUX_OSL ++#undef printf ++#define printf(fmt, args...) osl_printf((fmt), ## args) ++#undef sprintf ++#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args) ++#undef strcmp ++#define strcmp(s1, s2) osl_strcmp((s1), (s2)) ++#undef strncmp ++#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n)) ++#undef strlen ++#define strlen(s) osl_strlen((s)) ++#undef strcpy ++#define strcpy(d, s) osl_strcpy((d), (s)) ++#undef strncpy ++#define strncpy(d, s, n) osl_strncpy((d), (s), (n)) ++#endif ++extern int osl_printf(const char *format, ...); ++extern int osl_sprintf(char *buf, const char *format, ...); ++extern int osl_strcmp(const char *s1, const char *s2); ++extern int osl_strncmp(const char *s1, const char *s2, uint n); ++extern int osl_strlen(const char *s); ++extern char* osl_strcpy(char *d, const char *s); ++extern char* osl_strncpy(char *d, const char *s, uint n); ++ ++/* register access macros */ ++#if !defined(BCMJTAG) ++#define R_REG(r) ( \ ++ sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \ ++ osl_readl((volatile uint32*)(r)) \ ++) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#endif ++ ++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) ++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++extern uint8 osl_readb(volatile uint8 *r); ++extern uint16 osl_readw(volatile uint16 *r); ++extern uint32 osl_readl(volatile uint32 *r); ++extern void osl_writeb(uint8 v, volatile uint8 *r); ++extern void osl_writew(uint16 v, volatile uint16 *r); ++extern void osl_writel(uint32 v, volatile uint32 *r); ++ ++/* bcopy, bcmp, and bzero */ ++extern void bcopy(const void *src, void *dst, int len); ++extern int bcmp(const void *b1, const void *b2, int len); ++extern void bzero(void *b, int len); ++ ++/* uncached virtual address */ ++#define OSL_UNCACHED(va) osl_uncached((va)) ++extern void *osl_uncached(void *va); ++ ++/* get processor cycle count */ ++#define OSL_GETCYCLES(x) ((x) = osl_getcycles()) ++extern uint osl_getcycles(void); ++ ++/* dereference an address that may target abort */ ++#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr)) ++extern int osl_busprobe(uint32 *val, uint32 addr); ++ ++/* map/unmap physical to virtual */ ++#define REG_MAP(pa, size) osl_reg_map((pa), (size)) ++#define REG_UNMAP(va) osl_reg_unmap((va)) ++extern void *osl_reg_map(uint32 pa, uint size); ++extern void osl_reg_unmap(void *va); ++ ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) bzero((r), (len)) ++ ++/* packet primitives */ ++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) ++#define PKTFREE(osh, skb, send) osl_pktfree((skb)) ++#define PKTDATA(osh, skb) osl_pktdata((osh), (skb)) ++#define PKTLEN(osh, skb) osl_pktlen((osh), (skb)) ++#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb)) ++#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb)) ++#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb)) ++#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) ++#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len)) ++#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes)) ++#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes)) ++#define PKTDUP(osh, skb) osl_pktdup((osh), (skb)) ++#define PKTCOOKIE(skb) osl_pktcookie((skb)) ++#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) ++#define PKTLINK(skb) osl_pktlink((skb)) ++#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) ++#define PKTPRIO(skb) osl_pktprio((skb)) ++#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x)) ++extern void *osl_pktget(osl_t *osh, uint len, bool send); ++extern void osl_pktfree(void *skb); ++extern uchar *osl_pktdata(osl_t *osh, void *skb); ++extern uint osl_pktlen(osl_t *osh, void *skb); ++extern uint osl_pktheadroom(osl_t *osh, void *skb); ++extern uint osl_pkttailroom(osl_t *osh, void *skb); ++extern void *osl_pktnext(osl_t *osh, void *skb); ++extern void osl_pktsetnext(void *skb, void *x); ++extern void osl_pktsetlen(osl_t *osh, void *skb, uint len); ++extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes); ++extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes); ++extern void *osl_pktdup(osl_t *osh, void *skb); ++extern void *osl_pktcookie(void *skb); ++extern void osl_pktsetcookie(void *skb, void *x); ++extern void *osl_pktlink(void *skb); ++extern void osl_pktsetlink(void *skb, void *x); ++extern uint osl_pktprio(void *skb); ++extern void osl_pktsetprio(void *skb, uint x); ++ ++#endif /* BINOSL */ ++ ++#define OSL_ERROR(bcmerror) osl_error(bcmerror) ++extern int osl_error(int bcmerror); ++ ++/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ ++#define PKTBUFSZ 2048 ++ ++#endif /* _linux_osl_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/linuxver.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/linuxver.h +--- linux-2.6.17/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/linuxver.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,389 @@ ++/* ++ * Linux-specific abstractions to gain some independence from linux kernel versions. ++ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _linuxver_h_ ++#define _linuxver_h_ ++ ++#include <linux/config.h> ++#include <linux/version.h> ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) ++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ ++#ifdef __UNDEF_NO_VERSION__ ++#undef __NO_VERSION__ ++#else ++#define __NO_VERSION__ ++#endif ++#endif ++ ++#if defined(MODULE) && defined(MODVERSIONS) ++#include <linux/modversions.h> ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ++#include <linux/moduleparam.h> ++#endif ++ ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ++#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i") ++#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_)) ++#endif ++ ++/* linux/malloc.h is deprecated, use linux/slab.h instead. */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) ++#include <linux/malloc.h> ++#else ++#include <linux/slab.h> ++#endif ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/string.h> ++#include <linux/pci.h> ++#include <linux/interrupt.h> ++#include <linux/netdevice.h> ++#include <asm/io.h> ++ ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)) ++#include <linux/workqueue.h> ++#else ++#include <linux/tqueue.h> ++#ifndef work_struct ++#define work_struct tq_struct ++#endif ++#ifndef INIT_WORK ++#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) ++#endif ++#ifndef schedule_work ++#define schedule_work(_work) schedule_task((_work)) ++#endif ++#ifndef flush_scheduled_work ++#define flush_scheduled_work() flush_scheduled_tasks() ++#endif ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) ++/* Some distributions have their own 2.6.x compatibility layers */ ++#ifndef IRQ_NONE ++typedef void irqreturn_t; ++#define IRQ_NONE ++#define IRQ_HANDLED ++#define IRQ_RETVAL(x) ++#endif ++#else ++typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs); ++#endif ++ ++#ifndef __exit ++#define __exit ++#endif ++#ifndef __devexit ++#define __devexit ++#endif ++#ifndef __devinit ++#define __devinit __init ++#endif ++#ifndef __devinitdata ++#define __devinitdata ++#endif ++#ifndef __devexit_p ++#define __devexit_p(x) x ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) ++ ++#define pci_get_drvdata(dev) (dev)->sysdata ++#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) ++ ++/* ++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration ++ */ ++ ++struct pci_device_id { ++ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ ++ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ ++ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ ++ unsigned long driver_data; /* Data private to the driver */ ++}; ++ ++struct pci_driver { ++ struct list_head node; ++ char *name; ++ const struct pci_device_id *id_table; /* NULL if wants all devices */ ++ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ ++ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ ++ void (*suspend)(struct pci_dev *dev); /* Device suspended */ ++ void (*resume)(struct pci_dev *dev); /* Device woken up */ ++}; ++ ++#define MODULE_DEVICE_TABLE(type, name) ++#define PCI_ANY_ID (~0) ++ ++/* compatpci.c */ ++#define pci_module_init pci_register_driver ++extern int pci_register_driver(struct pci_driver *drv); ++extern void pci_unregister_driver(struct pci_driver *drv); ++ ++#endif /* PCI registration */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) ++#ifdef MODULE ++#define module_init(x) int init_module(void) { return x(); } ++#define module_exit(x) void cleanup_module(void) { x(); } ++#else ++#define module_init(x) __initcall(x); ++#define module_exit(x) __exitcall(x); ++#endif ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) ++#define list_for_each(pos, head) \ ++ for (pos = (head)->next; pos != (head); pos = pos->next) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) ++#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) ++#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) ++#define pci_enable_device(dev) do { } while (0) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) ++#define net_device device ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) ++ ++/* ++ * DMA mapping ++ * ++ * See linux/Documentation/DMA-mapping.txt ++ */ ++ ++#ifndef PCI_DMA_TODEVICE ++#define PCI_DMA_TODEVICE 1 ++#define PCI_DMA_FROMDEVICE 2 ++#endif ++ ++typedef u32 dma_addr_t; ++ ++/* Pure 2^n version of get_order */ ++static inline int get_order(unsigned long size) ++{ ++ int order; ++ ++ size = (size-1) >> (PAGE_SHIFT-1); ++ order = -1; ++ do { ++ size >>= 1; ++ order++; ++ } while (size); ++ return order; ++} ++ ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, ++ dma_addr_t *dma_handle) ++{ ++ void *ret; ++ int gfp = GFP_ATOMIC | GFP_DMA; ++ ++ ret = (void *)__get_free_pages(gfp, get_order(size)); ++ ++ if (ret != NULL) { ++ memset(ret, 0, size); ++ *dma_handle = virt_to_bus(ret); ++ } ++ return ret; ++} ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, ++ void *vaddr, dma_addr_t dma_handle) ++{ ++ free_pages((unsigned long)vaddr, get_order(size)); ++} ++#ifdef ILSIM ++extern uint pci_map_single(void *dev, void *va, uint size, int direction); ++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); ++#else ++#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) ++#define pci_unmap_single(cookie, address, size, dir) ++#endif ++ ++#endif /* DMA mapping */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) ++ ++#define dev_kfree_skb_any(a) dev_kfree_skb(a) ++#define netif_down(dev) do { (dev)->start = 0; } while(0) ++ ++/* pcmcia-cs provides its own netdevice compatibility layer */ ++#ifndef _COMPAT_NETDEVICE_H ++ ++/* ++ * SoftNet ++ * ++ * For pre-softnet kernels we need to tell the upper layer not to ++ * re-enter start_xmit() while we are in there. However softnet ++ * guarantees not to enter while we are in there so there is no need ++ * to do the netif_stop_queue() dance unless the transmit queue really ++ * gets stuck. This should also improve performance according to tests ++ * done by Aman Singla. ++ */ ++ ++#define dev_kfree_skb_irq(a) dev_kfree_skb(a) ++#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) ++#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) ++ ++static inline void netif_start_queue(struct net_device *dev) ++{ ++ dev->tbusy = 0; ++ dev->interrupt = 0; ++ dev->start = 1; ++} ++ ++#define netif_queue_stopped(dev) (dev)->tbusy ++#define netif_running(dev) (dev)->start ++ ++#endif /* _COMPAT_NETDEVICE_H */ ++ ++#define netif_device_attach(dev) netif_start_queue(dev) ++#define netif_device_detach(dev) netif_stop_queue(dev) ++ ++/* 2.4.x renamed bottom halves to tasklets */ ++#define tasklet_struct tq_struct ++static inline void tasklet_schedule(struct tasklet_struct *tasklet) ++{ ++ queue_task(tasklet, &tq_immediate); ++ mark_bh(IMMEDIATE_BH); ++} ++ ++static inline void tasklet_init(struct tasklet_struct *tasklet, ++ void (*func)(unsigned long), ++ unsigned long data) ++{ ++ tasklet->next = NULL; ++ tasklet->sync = 0; ++ tasklet->routine = (void (*)(void *))func; ++ tasklet->data = (void *)data; ++} ++#define tasklet_kill(tasklet) {do{} while(0);} ++ ++/* 2.4.x introduced del_timer_sync() */ ++#define del_timer_sync(timer) del_timer(timer) ++ ++#else ++ ++#define netif_down(dev) ++ ++#endif /* SoftNet */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) ++ ++/* ++ * Emit code to initialise a tq_struct's routine and data pointers ++ */ ++#define PREPARE_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ (_tq)->routine = _routine; \ ++ (_tq)->data = _data; \ ++ } while (0) ++ ++/* ++ * Emit code to initialise all of a tq_struct ++ */ ++#define INIT_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ INIT_LIST_HEAD(&(_tq)->list); \ ++ (_tq)->sync = 0; \ ++ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ ++ } while (0) ++ ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) ++ ++/* Power management related routines */ ++ ++static inline int ++pci_save_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_read_config_dword(dev, i * 4,&buffer[i]); ++ } ++ return 0; ++} ++ ++static inline int ++pci_restore_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_write_config_dword(dev,i * 4, buffer[i]); ++ } ++ /* ++ * otherwise, write the context information we know from bootup. ++ * This works around a problem where warm-booting from Windows ++ * combined with a D3(hot)->D0 transition causes PCI config ++ * header data to be forgotten. ++ */ ++ else { ++ for (i = 0; i < 6; i ++) ++ pci_write_config_dword(dev, ++ PCI_BASE_ADDRESS_0 + (i * 4), ++ pci_resource_start(dev, i)); ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ } ++ return 0; ++} ++ ++#endif /* PCI power management */ ++ ++/* Old cp0 access macros deprecated in 2.4.19 */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) ++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) ++#endif ++ ++/* Module refcount handled internally in 2.6.x */ ++#ifndef SET_MODULE_OWNER ++#define SET_MODULE_OWNER(dev) do {} while (0) ++#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT ++#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT ++#else ++#define OLD_MOD_INC_USE_COUNT do {} while (0) ++#define OLD_MOD_DEC_USE_COUNT do {} while (0) ++#endif ++ ++#ifndef SET_NETDEV_DEV ++#define SET_NETDEV_DEV(net, pdev) do {} while (0) ++#endif ++ ++#ifndef HAVE_FREE_NETDEV ++#define free_netdev(dev) kfree(dev) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) ++/* struct packet_type redefined in 2.6.x */ ++#define af_packet_priv data ++#endif ++ ++#endif /* _linuxver_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/mipsinc.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/mipsinc.h +--- linux-2.6.17/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/mipsinc.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,552 @@ ++/* ++ * HND Run Time Environment for standalone MIPS programs. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _MISPINC_H ++#define _MISPINC_H ++ ++ ++/* MIPS defines */ ++ ++#ifdef _LANGUAGE_ASSEMBLY ++ ++/* ++ * Symbolic register names for 32 bit ABI ++ */ ++#define zero $0 /* wired zero */ ++#define AT $1 /* assembler temp - uppercase because of ".set at" */ ++#define v0 $2 /* return value */ ++#define v1 $3 ++#define a0 $4 /* argument registers */ ++#define a1 $5 ++#define a2 $6 ++#define a3 $7 ++#define t0 $8 /* caller saved */ ++#define t1 $9 ++#define t2 $10 ++#define t3 $11 ++#define t4 $12 ++#define t5 $13 ++#define t6 $14 ++#define t7 $15 ++#define s0 $16 /* callee saved */ ++#define s1 $17 ++#define s2 $18 ++#define s3 $19 ++#define s4 $20 ++#define s5 $21 ++#define s6 $22 ++#define s7 $23 ++#define t8 $24 /* caller saved */ ++#define t9 $25 ++#define jp $25 /* PIC jump register */ ++#define k0 $26 /* kernel scratch */ ++#define k1 $27 ++#define gp $28 /* global pointer */ ++#define sp $29 /* stack pointer */ ++#define fp $30 /* frame pointer */ ++#define s8 $30 /* same like fp! */ ++#define ra $31 /* return address */ ++ ++ ++/* ++ * CP0 Registers ++ */ ++ ++#define C0_INX $0 ++#define C0_RAND $1 ++#define C0_TLBLO0 $2 ++#define C0_TLBLO C0_TLBLO0 ++#define C0_TLBLO1 $3 ++#define C0_CTEXT $4 ++#define C0_PGMASK $5 ++#define C0_WIRED $6 ++#define C0_BADVADDR $8 ++#define C0_COUNT $9 ++#define C0_TLBHI $10 ++#define C0_COMPARE $11 ++#define C0_SR $12 ++#define C0_STATUS C0_SR ++#define C0_CAUSE $13 ++#define C0_EPC $14 ++#define C0_PRID $15 ++#define C0_CONFIG $16 ++#define C0_LLADDR $17 ++#define C0_WATCHLO $18 ++#define C0_WATCHHI $19 ++#define C0_XCTEXT $20 ++#define C0_DIAGNOSTIC $22 ++#define C0_BROADCOM C0_DIAGNOSTIC ++#define C0_PERFORMANCE $25 ++#define C0_ECC $26 ++#define C0_CACHEERR $27 ++#define C0_TAGLO $28 ++#define C0_TAGHI $29 ++#define C0_ERREPC $30 ++#define C0_DESAVE $31 ++ ++/* ++ * LEAF - declare leaf routine ++ */ ++#define LEAF(symbol) \ ++ .globl symbol; \ ++ .align 2; \ ++ .type symbol,@function; \ ++ .ent symbol,0; \ ++symbol: .frame sp,0,ra ++ ++/* ++ * END - mark end of function ++ */ ++#define END(function) \ ++ .end function; \ ++ .size function,.-function ++ ++#define _ULCAST_ ++ ++#else ++ ++/* ++ * The following macros are especially useful for __asm__ ++ * inline assembler. ++ */ ++#ifndef __STR ++#define __STR(x) #x ++#endif ++#ifndef STR ++#define STR(x) __STR(x) ++#endif ++ ++#define _ULCAST_ (unsigned long) ++ ++ ++/* ++ * CP0 Registers ++ */ ++ ++#define C0_INX 0 /* CP0: TLB Index */ ++#define C0_RAND 1 /* CP0: TLB Random */ ++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ ++#define C0_CTEXT 4 /* CP0: Context */ ++#define C0_PGMASK 5 /* CP0: TLB PageMask */ ++#define C0_WIRED 6 /* CP0: TLB Wired */ ++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ ++#define C0_COUNT 9 /* CP0: Count */ ++#define C0_TLBHI 10 /* CP0: TLB EntryHi */ ++#define C0_COMPARE 11 /* CP0: Compare */ ++#define C0_SR 12 /* CP0: Processor Status */ ++#define C0_STATUS C0_SR /* CP0: Processor Status */ ++#define C0_CAUSE 13 /* CP0: Exception Cause */ ++#define C0_EPC 14 /* CP0: Exception PC */ ++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ ++#define C0_CONFIG 16 /* CP0: Config */ ++#define C0_LLADDR 17 /* CP0: LLAddr */ ++#define C0_WATCHLO 18 /* CP0: WatchpointLo */ ++#define C0_WATCHHI 19 /* CP0: WatchpointHi */ ++#define C0_XCTEXT 20 /* CP0: XContext */ ++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ ++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ ++#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */ ++#define C0_ECC 26 /* CP0: ECC */ ++#define C0_CACHEERR 27 /* CP0: CacheErr */ ++#define C0_TAGLO 28 /* CP0: TagLo */ ++#define C0_TAGHI 29 /* CP0: TagHi */ ++#define C0_ERREPC 30 /* CP0: ErrorEPC */ ++#define C0_DESAVE 31 /* CP0: DebugSave */ ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++/* ++ * Memory segments (32bit kernel mode addresses) ++ */ ++#undef KUSEG ++#undef KSEG0 ++#undef KSEG1 ++#undef KSEG2 ++#undef KSEG3 ++#define KUSEG 0x00000000 ++#define KSEG0 0x80000000 ++#define KSEG1 0xa0000000 ++#define KSEG2 0xc0000000 ++#define KSEG3 0xe0000000 ++#define PHYSADDR_MASK 0x1fffffff ++ ++/* ++ * Map an address to a certain kernel segment ++ */ ++#undef PHYSADDR ++#undef KSEG0ADDR ++#undef KSEG1ADDR ++#undef KSEG2ADDR ++#undef KSEG3ADDR ++ ++#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) ++#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) ++#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) ++#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) ++#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) ++ ++ ++#ifndef Index_Invalidate_I ++/* ++ * Cache Operations ++ */ ++#define Index_Invalidate_I 0x00 ++#define Index_Writeback_Inv_D 0x01 ++#define Index_Invalidate_SI 0x02 ++#define Index_Writeback_Inv_SD 0x03 ++#define Index_Load_Tag_I 0x04 ++#define Index_Load_Tag_D 0x05 ++#define Index_Load_Tag_SI 0x06 ++#define Index_Load_Tag_SD 0x07 ++#define Index_Store_Tag_I 0x08 ++#define Index_Store_Tag_D 0x09 ++#define Index_Store_Tag_SI 0x0A ++#define Index_Store_Tag_SD 0x0B ++#define Create_Dirty_Excl_D 0x0d ++#define Create_Dirty_Excl_SD 0x0f ++#define Hit_Invalidate_I 0x10 ++#define Hit_Invalidate_D 0x11 ++#define Hit_Invalidate_SI 0x12 ++#define Hit_Invalidate_SD 0x13 ++#define Fill_I 0x14 ++#define Hit_Writeback_Inv_D 0x15 ++ /* 0x16 is unused */ ++#define Hit_Writeback_Inv_SD 0x17 ++#define R5K_Page_Invalidate_S 0x17 ++#define Hit_Writeback_I 0x18 ++#define Hit_Writeback_D 0x19 ++ /* 0x1a is unused */ ++#define Hit_Writeback_SD 0x1b ++ /* 0x1c is unused */ ++ /* 0x1e is unused */ ++#define Hit_Set_Virtual_SI 0x1e ++#define Hit_Set_Virtual_SD 0x1f ++#endif ++ ++ ++/* ++ * R4x00 interrupt enable / cause bits ++ */ ++#define IE_SW0 (_ULCAST_(1) << 8) ++#define IE_SW1 (_ULCAST_(1) << 9) ++#define IE_IRQ0 (_ULCAST_(1) << 10) ++#define IE_IRQ1 (_ULCAST_(1) << 11) ++#define IE_IRQ2 (_ULCAST_(1) << 12) ++#define IE_IRQ3 (_ULCAST_(1) << 13) ++#define IE_IRQ4 (_ULCAST_(1) << 14) ++#define IE_IRQ5 (_ULCAST_(1) << 15) ++ ++#ifndef ST0_UM ++/* ++ * Bitfields in the mips32 cp0 status register ++ */ ++#define ST0_IE 0x00000001 ++#define ST0_EXL 0x00000002 ++#define ST0_ERL 0x00000004 ++#define ST0_UM 0x00000010 ++#define ST0_SWINT0 0x00000100 ++#define ST0_SWINT1 0x00000200 ++#define ST0_HWINT0 0x00000400 ++#define ST0_HWINT1 0x00000800 ++#define ST0_HWINT2 0x00001000 ++#define ST0_HWINT3 0x00002000 ++#define ST0_HWINT4 0x00004000 ++#define ST0_HWINT5 0x00008000 ++#define ST0_IM 0x0000ff00 ++#define ST0_NMI 0x00080000 ++#define ST0_SR 0x00100000 ++#define ST0_TS 0x00200000 ++#define ST0_BEV 0x00400000 ++#define ST0_RE 0x02000000 ++#define ST0_RP 0x08000000 ++#define ST0_CU 0xf0000000 ++#define ST0_CU0 0x10000000 ++#define ST0_CU1 0x20000000 ++#define ST0_CU2 0x40000000 ++#define ST0_CU3 0x80000000 ++#endif ++ ++ ++/* ++ * Bitfields in the mips32 cp0 cause register ++ */ ++#define C_EXC 0x0000007c ++#define C_EXC_SHIFT 2 ++#define C_INT 0x0000ff00 ++#define C_INT_SHIFT 8 ++#define C_SW0 (_ULCAST_(1) << 8) ++#define C_SW1 (_ULCAST_(1) << 9) ++#define C_IRQ0 (_ULCAST_(1) << 10) ++#define C_IRQ1 (_ULCAST_(1) << 11) ++#define C_IRQ2 (_ULCAST_(1) << 12) ++#define C_IRQ3 (_ULCAST_(1) << 13) ++#define C_IRQ4 (_ULCAST_(1) << 14) ++#define C_IRQ5 (_ULCAST_(1) << 15) ++#define C_WP 0x00400000 ++#define C_IV 0x00800000 ++#define C_CE 0x30000000 ++#define C_CE_SHIFT 28 ++#define C_BD 0x80000000 ++ ++/* Values in C_EXC */ ++#define EXC_INT 0 ++#define EXC_TLBM 1 ++#define EXC_TLBL 2 ++#define EXC_TLBS 3 ++#define EXC_AEL 4 ++#define EXC_AES 5 ++#define EXC_IBE 6 ++#define EXC_DBE 7 ++#define EXC_SYS 8 ++#define EXC_BPT 9 ++#define EXC_RI 10 ++#define EXC_CU 11 ++#define EXC_OV 12 ++#define EXC_TR 13 ++#define EXC_WATCH 23 ++#define EXC_MCHK 24 ++ ++ ++/* ++ * Bits in the cp0 config register. ++ */ ++#define CONF_CM_CACHABLE_NO_WA 0 ++#define CONF_CM_CACHABLE_WA 1 ++#define CONF_CM_UNCACHED 2 ++#define CONF_CM_CACHABLE_NONCOHERENT 3 ++#define CONF_CM_CACHABLE_CE 4 ++#define CONF_CM_CACHABLE_COW 5 ++#define CONF_CM_CACHABLE_CUW 6 ++#define CONF_CM_CACHABLE_ACCELERATED 7 ++#define CONF_CM_CMASK 7 ++#define CONF_CU (_ULCAST_(1) << 3) ++#define CONF_DB (_ULCAST_(1) << 4) ++#define CONF_IB (_ULCAST_(1) << 5) ++#define CONF_SE (_ULCAST_(1) << 12) ++#define CONF_SC (_ULCAST_(1) << 17) ++#define CONF_AC (_ULCAST_(1) << 23) ++#define CONF_HALT (_ULCAST_(1) << 25) ++ ++ ++/* ++ * Bits in the cp0 config register select 1. ++ */ ++#define CONF1_FP 0x00000001 /* FPU present */ ++#define CONF1_EP 0x00000002 /* EJTAG present */ ++#define CONF1_CA 0x00000004 /* mips16 implemented */ ++#define CONF1_WR 0x00000008 /* Watch registers present */ ++#define CONF1_PC 0x00000010 /* Performance counters present */ ++#define CONF1_DA_SHIFT 7 /* D$ associativity */ ++#define CONF1_DA_MASK 0x00000380 ++#define CONF1_DA_BASE 1 ++#define CONF1_DL_SHIFT 10 /* D$ line size */ ++#define CONF1_DL_MASK 0x00001c00 ++#define CONF1_DL_BASE 2 ++#define CONF1_DS_SHIFT 13 /* D$ sets/way */ ++#define CONF1_DS_MASK 0x0000e000 ++#define CONF1_DS_BASE 64 ++#define CONF1_IA_SHIFT 16 /* I$ associativity */ ++#define CONF1_IA_MASK 0x00070000 ++#define CONF1_IA_BASE 1 ++#define CONF1_IL_SHIFT 19 /* I$ line size */ ++#define CONF1_IL_MASK 0x00380000 ++#define CONF1_IL_BASE 2 ++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ ++#define CONF1_IS_MASK 0x01c00000 ++#define CONF1_IS_BASE 64 ++#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ ++#define CONF1_MS_SHIFT 25 ++ ++/* PRID register */ ++#define PRID_COPT_MASK 0xff000000 ++#define PRID_COMP_MASK 0x00ff0000 ++#define PRID_IMP_MASK 0x0000ff00 ++#define PRID_REV_MASK 0x000000ff ++ ++#define PRID_COMP_LEGACY 0x000000 ++#define PRID_COMP_MIPS 0x010000 ++#define PRID_COMP_BROADCOM 0x020000 ++#define PRID_COMP_ALCHEMY 0x030000 ++#define PRID_COMP_SIBYTE 0x040000 ++#define PRID_IMP_BCM4710 0x4000 ++#define PRID_IMP_BCM3302 0x9000 ++#define PRID_IMP_BCM3303 0x9100 ++ ++#define PRID_IMP_UNKNOWN 0xff00 ++ ++#define BCM330X(id) \ ++ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \ ++ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) ++ ++/* Bits in C0_BROADCOM */ ++#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ ++#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ ++#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ ++#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ ++ ++/* PreFetch Cache aka Read Ahead Cache */ ++ ++#define PFC_CR0 0xff400000 /* control reg 0 */ ++#define PFC_CR1 0xff400004 /* control reg 1 */ ++ ++/* PFC operations */ ++#define PFC_I 0x00000001 /* Enable PFC use for instructions */ ++#define PFC_D 0x00000002 /* Enable PFC use for data */ ++#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */ ++#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */ ++#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */ ++#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */ ++#define PFC_DPF 0x00000040 /* Enable directional prefetching */ ++#define PFC_FLUSH 0x00000100 /* Flush the PFC */ ++#define PFC_BRR 0x40000000 /* Bus error indication */ ++#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */ ++ ++/* Handy defaults */ ++#define PFC_DISABLED 0 ++#define PFC_AUTO 0xffffffff /* auto select the default mode */ ++#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV) ++#define PFC_INST_NOPF (PFC_I | PFC_CINV) ++#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV) ++#define PFC_DATA_NOPF (PFC_D | PFC_CINV) ++#define PFC_I_AND_D (PFC_INST | PFC_DATA) ++#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF) ++ ++ ++/* ++ * These are the UART port assignments, expressed as offsets from the base ++ * register. These assignments should hold for any serial port based on ++ * a 8250, 16450, or 16550(A). ++ */ ++ ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ ++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ ++#define UART_LCR 3 /* Out: Line Control Register */ ++#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_SCR 7 /* I/O: Scratch Register */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_RXRDY 0x01 /* Receiver ready */ ++ ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++/* ++ * Macros to access the system control coprocessor ++ */ ++ ++#define MFC0(source, sel) \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ ++ "move\t%0,$1\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res) \ ++ : \ ++ :"$1"); \ ++ __res; \ ++}) ++ ++#define MTC0(source, sel, value) \ ++do { \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "move\t$1,%z0\n\t" \ ++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ : \ ++ :"jr" (value) \ ++ :"$1"); \ ++} while (0) ++ ++#define get_c0_count() \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "mfc0\t%0,$9\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res)); \ ++ __res; \ ++}) ++ ++static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; ++ ++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT))) ++ lsz = CONF1_IL_BASE << lsz; ++ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT); ++ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; ++} ++ ++static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; ++ ++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT))) ++ lsz = CONF1_DL_BASE << lsz; ++ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT); ++ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; ++} ++ ++#define cache_op(base, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1, (%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); ++ ++#define cache_unroll4(base, delta, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1,0(%0); \ ++ cache %1,delta(%0); \ ++ cache %1,(2 * delta)(%0); \ ++ cache %1,(3 * delta)(%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); ++ ++#endif /* !_LANGUAGE_ASSEMBLY */ ++ ++#endif /* _MISPINC_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/osl.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/osl.h +--- linux-2.6.17/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/osl.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,42 @@ ++/* ++ * OS Abstraction Layer ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _osl_h_ ++#define _osl_h_ ++ ++/* osl handle type forward declaration */ ++typedef struct os_handle osl_t; ++ ++#if defined(linux) ++#include <linux_osl.h> ++#elif defined(NDIS) ++#include <ndis_osl.h> ++#elif defined(_CFE_) ++#include <cfe_osl.h> ++#elif defined(_HNDRTE_) ++#include <hndrte_osl.h> ++#elif defined(_MINOSL_) ++#include <min_osl.h> ++#elif PMON ++#include <pmon_osl.h> ++#elif defined(MACOSX) ++#include <macosx_osl.h> ++#else ++#error "Unsupported OSL requested" ++#endif ++ ++/* handy */ ++#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) ++#define MAXPRIO 7 /* 0-7 */ ++ ++#endif /* _osl_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/pcicfg.h +--- linux-2.6.17/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/pcicfg.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,398 @@ ++/* ++ * pcicfg.h: PCI configuration constants and structures. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _h_pci_ ++#define _h_pci_ ++ ++/* The following inside ifndef's so we don't collide with NTDDK.H */ ++#ifndef PCI_MAX_BUS ++#define PCI_MAX_BUS 0x100 ++#endif ++#ifndef PCI_MAX_DEVICES ++#define PCI_MAX_DEVICES 0x20 ++#endif ++#ifndef PCI_MAX_FUNCTION ++#define PCI_MAX_FUNCTION 0x8 ++#endif ++ ++#ifndef PCI_INVALID_VENDORID ++#define PCI_INVALID_VENDORID 0xffff ++#endif ++#ifndef PCI_INVALID_DEVICEID ++#define PCI_INVALID_DEVICEID 0xffff ++#endif ++ ++ ++/* Convert between bus-slot-function-register and config addresses */ ++ ++#define PCICFG_BUS_SHIFT 16 /* Bus shift */ ++#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ ++#define PCICFG_FUN_SHIFT 8 /* Function shift */ ++#define PCICFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define PCICFG_BUS_MASK 0xff /* Bus mask */ ++#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ ++#define PCICFG_FUN_MASK 7 /* Function mask */ ++#define PCICFG_OFF_MASK 0xff /* Bus mask */ ++ ++#define PCI_CONFIG_ADDR(b, s, f, o) \ ++ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ ++ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ ++ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ ++ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) ++ ++#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) ++#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) ++#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) ++#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) ++ ++/* The actual config space */ ++ ++#define PCI_BAR_MAX 6 ++ ++#define PCI_ROM_BAR 8 ++ ++#define PCR_RSVDA_MAX 2 ++ ++/* pci config status reg has a bit to indicate that capability ptr is present*/ ++ ++#define PCI_CAPPTR_PRESENT 0x0010 ++ ++typedef struct _pci_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long base[PCI_BAR_MAX]; ++ unsigned long cardbus_cis; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long baserom; ++ unsigned long rsvd_a[PCR_RSVDA_MAX]; ++ unsigned char int_line; ++ unsigned char int_pin; ++ unsigned char min_gnt; ++ unsigned char max_lat; ++ unsigned char dev_dep[192]; ++} pci_config_regs; ++ ++#define SZPCR (sizeof (pci_config_regs)) ++#define MINSZPCR 64 /* offsetof (dev_dep[0] */ ++ ++/* A structure for the config registers is nice, but in most ++ * systems the config space is not memory mapped, so we need ++ * filed offsetts. :-( ++ */ ++#define PCI_CFG_VID 0 ++#define PCI_CFG_DID 2 ++#define PCI_CFG_CMD 4 ++#define PCI_CFG_STAT 6 ++#define PCI_CFG_REV 8 ++#define PCI_CFG_PROGIF 9 ++#define PCI_CFG_SUBCL 0xa ++#define PCI_CFG_BASECL 0xb ++#define PCI_CFG_CLSZ 0xc ++#define PCI_CFG_LATTIM 0xd ++#define PCI_CFG_HDR 0xe ++#define PCI_CFG_BIST 0xf ++#define PCI_CFG_BAR0 0x10 ++#define PCI_CFG_BAR1 0x14 ++#define PCI_CFG_BAR2 0x18 ++#define PCI_CFG_BAR3 0x1c ++#define PCI_CFG_BAR4 0x20 ++#define PCI_CFG_BAR5 0x24 ++#define PCI_CFG_CIS 0x28 ++#define PCI_CFG_SVID 0x2c ++#define PCI_CFG_SSID 0x2e ++#define PCI_CFG_ROMBAR 0x30 ++#define PCI_CFG_CAPPTR 0x34 ++#define PCI_CFG_INT 0x3c ++#define PCI_CFG_PIN 0x3d ++#define PCI_CFG_MINGNT 0x3e ++#define PCI_CFG_MAXLAT 0x3f ++ ++/* Classes and subclasses */ ++ ++typedef enum { ++ PCI_CLASS_OLD = 0, ++ PCI_CLASS_DASDI, ++ PCI_CLASS_NET, ++ PCI_CLASS_DISPLAY, ++ PCI_CLASS_MMEDIA, ++ PCI_CLASS_MEMORY, ++ PCI_CLASS_BRIDGE, ++ PCI_CLASS_COMM, ++ PCI_CLASS_BASE, ++ PCI_CLASS_INPUT, ++ PCI_CLASS_DOCK, ++ PCI_CLASS_CPU, ++ PCI_CLASS_SERIAL, ++ PCI_CLASS_INTELLIGENT = 0xe, ++ PCI_CLASS_SATELLITE, ++ PCI_CLASS_CRYPT, ++ PCI_CLASS_DSP, ++ PCI_CLASS_MAX ++} pci_classes; ++ ++typedef enum { ++ PCI_DASDI_SCSI, ++ PCI_DASDI_IDE, ++ PCI_DASDI_FLOPPY, ++ PCI_DASDI_IPI, ++ PCI_DASDI_RAID, ++ PCI_DASDI_OTHER = 0x80 ++} pci_dasdi_subclasses; ++ ++typedef enum { ++ PCI_NET_ETHER, ++ PCI_NET_TOKEN, ++ PCI_NET_FDDI, ++ PCI_NET_ATM, ++ PCI_NET_OTHER = 0x80 ++} pci_net_subclasses; ++ ++typedef enum { ++ PCI_DISPLAY_VGA, ++ PCI_DISPLAY_XGA, ++ PCI_DISPLAY_3D, ++ PCI_DISPLAY_OTHER = 0x80 ++} pci_display_subclasses; ++ ++typedef enum { ++ PCI_MMEDIA_VIDEO, ++ PCI_MMEDIA_AUDIO, ++ PCI_MMEDIA_PHONE, ++ PCI_MEDIA_OTHER = 0x80 ++} pci_mmedia_subclasses; ++ ++typedef enum { ++ PCI_MEMORY_RAM, ++ PCI_MEMORY_FLASH, ++ PCI_MEMORY_OTHER = 0x80 ++} pci_memory_subclasses; ++ ++typedef enum { ++ PCI_BRIDGE_HOST, ++ PCI_BRIDGE_ISA, ++ PCI_BRIDGE_EISA, ++ PCI_BRIDGE_MC, ++ PCI_BRIDGE_PCI, ++ PCI_BRIDGE_PCMCIA, ++ PCI_BRIDGE_NUBUS, ++ PCI_BRIDGE_CARDBUS, ++ PCI_BRIDGE_RACEWAY, ++ PCI_BRIDGE_OTHER = 0x80 ++} pci_bridge_subclasses; ++ ++typedef enum { ++ PCI_COMM_UART, ++ PCI_COMM_PARALLEL, ++ PCI_COMM_MULTIUART, ++ PCI_COMM_MODEM, ++ PCI_COMM_OTHER = 0x80 ++} pci_comm_subclasses; ++ ++typedef enum { ++ PCI_BASE_PIC, ++ PCI_BASE_DMA, ++ PCI_BASE_TIMER, ++ PCI_BASE_RTC, ++ PCI_BASE_PCI_HOTPLUG, ++ PCI_BASE_OTHER = 0x80 ++} pci_base_subclasses; ++ ++typedef enum { ++ PCI_INPUT_KBD, ++ PCI_INPUT_PEN, ++ PCI_INPUT_MOUSE, ++ PCI_INPUT_SCANNER, ++ PCI_INPUT_GAMEPORT, ++ PCI_INPUT_OTHER = 0x80 ++} pci_input_subclasses; ++ ++typedef enum { ++ PCI_DOCK_GENERIC, ++ PCI_DOCK_OTHER = 0x80 ++} pci_dock_subclasses; ++ ++typedef enum { ++ PCI_CPU_386, ++ PCI_CPU_486, ++ PCI_CPU_PENTIUM, ++ PCI_CPU_ALPHA = 0x10, ++ PCI_CPU_POWERPC = 0x20, ++ PCI_CPU_MIPS = 0x30, ++ PCI_CPU_COPROC = 0x40, ++ PCI_CPU_OTHER = 0x80 ++} pci_cpu_subclasses; ++ ++typedef enum { ++ PCI_SERIAL_IEEE1394, ++ PCI_SERIAL_ACCESS, ++ PCI_SERIAL_SSA, ++ PCI_SERIAL_USB, ++ PCI_SERIAL_FIBER, ++ PCI_SERIAL_SMBUS, ++ PCI_SERIAL_OTHER = 0x80 ++} pci_serial_subclasses; ++ ++typedef enum { ++ PCI_INTELLIGENT_I2O, ++} pci_intelligent_subclasses; ++ ++typedef enum { ++ PCI_SATELLITE_TV, ++ PCI_SATELLITE_AUDIO, ++ PCI_SATELLITE_VOICE, ++ PCI_SATELLITE_DATA, ++ PCI_SATELLITE_OTHER = 0x80 ++} pci_satellite_subclasses; ++ ++typedef enum { ++ PCI_CRYPT_NETWORK, ++ PCI_CRYPT_ENTERTAINMENT, ++ PCI_CRYPT_OTHER = 0x80 ++} pci_crypt_subclasses; ++ ++typedef enum { ++ PCI_DSP_DPIO, ++ PCI_DSP_OTHER = 0x80 ++} pci_dsp_subclasses; ++ ++/* Header types */ ++typedef enum { ++ PCI_HEADER_NORMAL, ++ PCI_HEADER_BRIDGE, ++ PCI_HEADER_CARDBUS ++} pci_header_types; ++ ++ ++/* Overlay for a PCI-to-PCI bridge */ ++ ++#define PPB_RSVDA_MAX 2 ++#define PPB_RSVDD_MAX 8 ++ ++typedef struct _ppb_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long rsvd_a[PPB_RSVDA_MAX]; ++ unsigned char prim_bus; ++ unsigned char sec_bus; ++ unsigned char sub_bus; ++ unsigned char sec_lat; ++ unsigned char io_base; ++ unsigned char io_lim; ++ unsigned short sec_status; ++ unsigned short mem_base; ++ unsigned short mem_lim; ++ unsigned short pf_mem_base; ++ unsigned short pf_mem_lim; ++ unsigned long pf_mem_base_hi; ++ unsigned long pf_mem_lim_hi; ++ unsigned short io_base_hi; ++ unsigned short io_lim_hi; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long rsvd_b; ++ unsigned char rsvd_c; ++ unsigned char int_pin; ++ unsigned short bridge_ctrl; ++ unsigned char chip_ctrl; ++ unsigned char diag_ctrl; ++ unsigned short arb_ctrl; ++ unsigned long rsvd_d[PPB_RSVDD_MAX]; ++ unsigned char dev_dep[192]; ++} ppb_config_regs; ++ ++ ++/* PCI CAPABILITY DEFINES */ ++#define PCI_CAP_POWERMGMTCAP_ID 0x01 ++#define PCI_CAP_MSICAP_ID 0x05 ++ ++/* Data structure to define the Message Signalled Interrupt facility ++ * Valid for PCI and PCIE configurations */ ++typedef struct _pciconfig_cap_msi { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short msgctrl; ++ unsigned int msgaddr; ++} pciconfig_cap_msi; ++ ++/* Data structure to define the Power managment facility ++ * Valid for PCI and PCIE configurations */ ++typedef struct _pciconfig_cap_pwrmgmt { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short pme_cap; ++ unsigned short pme_sts_ctrl; ++ unsigned char pme_bridge_ext; ++ unsigned char data; ++} pciconfig_cap_pwrmgmt; ++ ++/* Everything below is BRCM HND proprietary */ ++ ++#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ ++#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ ++#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ ++#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ ++#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ ++#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ ++#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ ++#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ ++#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */ ++#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ ++#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ ++#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ ++ ++#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ ++#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ ++ ++/* PCI_INT_STATUS */ ++#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ ++ ++/* PCI_INT_MASK */ ++#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ ++#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ ++#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ ++ ++/* PCI_SPROM_CONTROL */ ++#define SPROM_BLANK 0x04 /* indicating a blank sprom */ ++#define SPROM_WRITEEN 0x10 /* sprom write enable */ ++#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ ++ ++#define SPROM_SIZE 256 /* sprom size in 16-bit */ ++#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ ++ ++/* PCI_CFG_CMD_STAT */ ++#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ ++ ++#endif +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/proto/ethernet.h +--- linux-2.6.17/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/proto/ethernet.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,145 @@ ++/******************************************************************************* ++ * $Id$ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. ++ ******************************************************************************/ ++ ++#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ ++#define _NET_ETHERNET_H_ ++ ++#ifndef _TYPEDEFS_H_ ++#include "typedefs.h" ++#endif ++ ++#if defined(__GNUC__) ++#define PACKED __attribute__((packed)) ++#else ++#define PACKED ++#endif ++ ++/* ++ * The number of bytes in an ethernet (MAC) address. ++ */ ++#define ETHER_ADDR_LEN 6 ++ ++/* ++ * The number of bytes in the type field. ++ */ ++#define ETHER_TYPE_LEN 2 ++ ++/* ++ * The number of bytes in the trailing CRC field. ++ */ ++#define ETHER_CRC_LEN 4 ++ ++/* ++ * The length of the combined header. ++ */ ++#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) ++ ++/* ++ * The minimum packet length. ++ */ ++#define ETHER_MIN_LEN 64 ++ ++/* ++ * The minimum packet user data length. ++ */ ++#define ETHER_MIN_DATA 46 ++ ++/* ++ * The maximum packet length. ++ */ ++#define ETHER_MAX_LEN 1518 ++ ++/* ++ * The maximum packet user data length. ++ */ ++#define ETHER_MAX_DATA 1500 ++ ++/* ++ * Used to uniquely identify a 802.1q VLAN-tagged header. ++ */ ++#define VLAN_TAG 0x8100 ++ ++/* ++ * Located after dest & src address in ether header. ++ */ ++#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2) ++ ++/* ++ * 4 bytes of vlan field info. ++ */ ++#define VLAN_FIELDS_SIZE 4 ++ ++/* location of pri bits in 16-bit vlan fields */ ++#define VLAN_PRI_SHIFT 13 ++ ++/* 3 bits of priority */ ++#define VLAN_PRI_MASK 7 ++ ++/* 802.1X ethertype */ ++#define ETHER_TYPE_802_1X 0x888e ++ ++/* ++ * A macro to validate a length with ++ */ ++#define ETHER_IS_VALID_LEN(foo) \ ++ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) ++ ++ ++#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ ++/* ++ * Structure of a 10Mb/s Ethernet header. ++ */ ++struct ether_header { ++ uint8 ether_dhost[ETHER_ADDR_LEN]; ++ uint8 ether_shost[ETHER_ADDR_LEN]; ++ uint16 ether_type; ++} PACKED ; ++ ++/* ++ * Structure of a 48-bit Ethernet address. ++ */ ++struct ether_addr { ++ uint8 octet[ETHER_ADDR_LEN]; ++} PACKED ; ++#endif ++ ++/* ++ * Takes a pointer, returns true if a 48-bit multicast address ++ * (including broadcast, since it is all ones) ++ */ ++#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) ++ ++/* ++ * Takes a pointer, returns true if a 48-bit broadcast (all ones) ++ */ ++#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ ++ ((uint8 *)(ea))[1] & \ ++ ((uint8 *)(ea))[2] & \ ++ ((uint8 *)(ea))[3] & \ ++ ((uint8 *)(ea))[4] & \ ++ ((uint8 *)(ea))[5]) == 0xff) ++ ++static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; ++ ++/* ++ * Takes a pointer, returns true if a 48-bit null address (all zeros) ++ */ ++#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ ++ ((uint8 *)(ea))[1] | \ ++ ((uint8 *)(ea))[2] | \ ++ ((uint8 *)(ea))[3] | \ ++ ((uint8 *)(ea))[4] | \ ++ ((uint8 *)(ea))[5]) == 0) ++ ++#undef PACKED ++ ++#endif /* _NET_ETHERNET_H_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/s5.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/s5.h +--- linux-2.6.17/arch/mips/bcm947xx/include/s5.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/s5.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,103 @@ ++#ifndef _S5_H_ ++#define _S5_H_ ++/* ++ * Copyright 2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * Broadcom Sentry5 (S5) BCM5365, 53xx, BCM58xx SOC Internal Core ++ * and MIPS3301 (R4K) System Address Space ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation, located in the file ++ * LICENSE. ++ * ++ * $Id: s5.h,v 1.3 2003/06/10 18:54:51 jfd Exp $ ++ * ++ */ ++ ++/* BCM5365 Address map */ ++#define KSEG1ADDR(x) ( (x) | 0xa0000000) ++#define BCM5365_SDRAM 0x00000000 /* 0-128MB Physical SDRAM */ ++#define BCM5365_PCI_MEM 0x08000000 /* Host Mode PCI mem space (64MB) */ ++#define BCM5365_PCI_CFG 0x0c000000 /* Host Mode PCI cfg space (64MB) */ ++#define BCM5365_PCI_DMA 0x40000000 /* Client Mode PCI mem space (1GB)*/ ++#define BCM5365_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM5365_ENUM 0x18000000 /* Beginning of core enum space */ ++ ++/* BCM5365 Core register space */ ++#define BCM5365_REG_CHIPC 0x18000000 /* Chipcommon registers */ ++#define BCM5365_REG_EMAC0 0x18001000 /* Ethernet MAC0 core registers */ ++#define BCM5365_REG_IPSEC 0x18002000 /* BCM582x CryptoCore registers */ ++#define BCM5365_REG_USB 0x18003000 /* USB core registers */ ++#define BCM5365_REG_PCI 0x18004000 /* PCI core registers */ ++#define BCM5365_REG_MIPS33 0x18005000 /* MIPS core registers */ ++#define BCM5365_REG_MEMC 0x18006000 /* MEMC core registers */ ++#define BCM5365_REG_UARTS (BCM5365_REG_CHIPC + 0x300) /* UART regs */ ++#define BCM5365_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++/* COM Ports 1/2 */ ++#define BCM5365_UART (BCM5365_REG_UARTS) ++#define BCM5365_UART_COM2 (BCM5365_REG_UARTS + 0x00000100) ++ ++/* Registers common to MIPS33 Core used in 5365 */ ++#define MIPS33_FLASH_REGION 0x1fc00000 /* Boot FLASH Region */ ++#define MIPS33_EXTIF_REGION 0x1a000000 /* Chipcommon EXTIF region*/ ++#define BCM5365_EXTIF 0x1b000000 /* MISC_CS */ ++#define MIPS33_FLASH_REGION_AUX 0x1c000000 /* FLASH Region 2*/ ++ ++/* Internal Core Sonics Backplane Devices */ ++#define INTERNAL_UART_COM1 BCM5365_UART ++#define INTERNAL_UART_COM2 BCM5365_UART_COM2 ++#define SB_REG_CHIPC BCM5365_REG_CHIPC ++#define SB_REG_ENET0 BCM5365_REG_EMAC0 ++#define SB_REG_IPSEC BCM5365_REG_IPSEC ++#define SB_REG_USB BCM5365_REG_USB ++#define SB_REG_PCI BCM5365_REG_PCI ++#define SB_REG_MIPS BCM5365_REG_MIPS33 ++#define SB_REG_MEMC BCM5365_REG_MEMC ++#define SB_REG_MEMC_OFF 0x6000 ++#define SB_EXTIF_SPACE MIPS33_EXTIF_REGION ++#define SB_FLASH_SPACE MIPS33_FLASH_REGION ++ ++/* ++ * XXX ++ * 5365-specific backplane interrupt flag numbers. This should be done ++ * dynamically instead. ++ */ ++#define SBFLAG_PCI 0 ++#define SBFLAG_ENET0 1 ++#define SBFLAG_ILINE20 2 ++#define SBFLAG_CODEC 3 ++#define SBFLAG_USB 4 ++#define SBFLAG_EXTIF 5 ++#define SBFLAG_ENET1 6 ++ ++/* BCM95365 Local Bus devices */ ++#define BCM95365K_RESET_ADDR BCM5365_EXTIF ++#define BCM95365K_BOARDID_ADDR (BCM5365_EXTIF | 0x4000) ++#define BCM95365K_DOC_ADDR (BCM5365_EXTIF | 0x6000) ++#define BCM95365K_LED_ADDR (BCM5365_EXTIF | 0xc000) ++#define BCM95365K_TOD_REG_BASE (BCM95365K_NVRAM_ADDR | 0x1ff0) ++#define BCM95365K_NVRAM_ADDR (BCM5365_EXTIF | 0xe000) ++#define BCM95365K_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ ++ ++/* Write to DLR2416 VFD Display character RAM */ ++#define LED_REG(x) \ ++ (*(volatile unsigned char *) (KSEG1ADDR(BCM95365K_LED_ADDR) + (x))) ++ ++#ifdef CONFIG_VSIM ++#define BCM5365_TRACE(trval) do { *((int *)0xa0002ff8) = (trval); \ ++ } while (0) ++#else ++#define BCM5365_TRACE(trval) do { *((unsigned char *)\ ++ KSEG1ADDR(BCM5365K_LED_ADDR)) = (trval); \ ++ *((int *)0xa0002ff8) = (trval); } while (0) ++#endif ++ ++/* BCM9536R Local Bus devices */ ++#define BCM95365R_DOC_ADDR BCM5365_EXTIF ++ ++ ++ ++#endif /*!_S5_H_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbchipc.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbchipc.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,440 @@ ++/* ++ * SiliconBackplane Chipcommon core hardware definitions. ++ * ++ * The chipcommon core provides chip identification, SB control, ++ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, ++ * gpio interface, extbus, and support for serial and parallel flashes. ++ * ++ * $Id$ ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ */ ++ ++#ifndef _SBCHIPC_H ++#define _SBCHIPC_H ++ ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ ++ ++typedef volatile struct { ++ uint32 chipid; /* 0x0 */ ++ uint32 capabilities; ++ uint32 corecontrol; /* corerev >= 1 */ ++ uint32 bist; ++ ++ /* OTP */ ++ uint32 otpstatus; /* 0x10, corerev >= 10 */ ++ uint32 otpcontrol; ++ uint32 otpprog; ++ uint32 PAD; ++ ++ /* Interrupt control */ ++ uint32 intstatus; /* 0x20 */ ++ uint32 intmask; ++ uint32 chipcontrol; /* 0x28, rev >= 11 */ ++ uint32 chipstatus; /* 0x2c, rev >= 11 */ ++ ++ /* Jtag Master */ ++ uint32 jtagcmd; /* 0x30, rev >= 10 */ ++ uint32 jtagir; ++ uint32 jtagdr; ++ uint32 jtagctrl; ++ ++ /* serial flash interface registers */ ++ uint32 flashcontrol; /* 0x40 */ ++ uint32 flashaddress; ++ uint32 flashdata; ++ uint32 PAD[1]; ++ ++ /* Silicon backplane configuration broadcast control */ ++ uint32 broadcastaddress; /* 0x50 */ ++ uint32 broadcastdata; ++ uint32 PAD[2]; ++ ++ /* gpio - cleared only by power-on-reset */ ++ uint32 gpioin; /* 0x60 */ ++ uint32 gpioout; ++ uint32 gpioouten; ++ uint32 gpiocontrol; ++ uint32 gpiointpolarity; ++ uint32 gpiointmask; ++ uint32 PAD[2]; ++ ++ /* Watchdog timer */ ++ uint32 watchdog; /* 0x80 */ ++ uint32 PAD[1]; ++ ++ /*GPIO based LED powersave registers corerev >= 16*/ ++ uint32 gpiotimerval; /*0x88 */ ++ uint32 gpiotimeroutmask; ++ ++ /* clock control */ ++ uint32 clockcontrol_n; /* 0x90 */ ++ uint32 clockcontrol_sb; /* aka m0 */ ++ uint32 clockcontrol_pci; /* aka m1 */ ++ uint32 clockcontrol_m2; /* mii/uart/mipsref */ ++ uint32 clockcontrol_mips; /* aka m3 */ ++ uint32 clkdiv; /* corerev >= 3 */ ++ uint32 PAD[2]; ++ ++ /* pll delay registers (corerev >= 4) */ ++ uint32 pll_on_delay; /* 0xb0 */ ++ uint32 fref_sel_delay; ++ uint32 slow_clk_ctl; /* 5 < corerev < 10 */ ++ uint32 PAD[1]; ++ ++ /* Instaclock registers (corerev >= 10) */ ++ uint32 system_clk_ctl; /* 0xc0 */ ++ uint32 clkstatestretch; ++ uint32 PAD[14]; ++ ++ /* ExtBus control registers (corerev >= 3) */ ++ uint32 pcmcia_config; /* 0x100 */ ++ uint32 pcmcia_memwait; ++ uint32 pcmcia_attrwait; ++ uint32 pcmcia_iowait; ++ uint32 ide_config; ++ uint32 ide_memwait; ++ uint32 ide_attrwait; ++ uint32 ide_iowait; ++ uint32 prog_config; ++ uint32 prog_waitcount; ++ uint32 flash_config; ++ uint32 flash_waitcount; ++ uint32 PAD[116]; ++ ++ /* uarts */ ++ uint8 uart0data; /* 0x300 */ ++ uint8 uart0imr; ++ uint8 uart0fcr; ++ uint8 uart0lcr; ++ uint8 uart0mcr; ++ uint8 uart0lsr; ++ uint8 uart0msr; ++ uint8 uart0scratch; ++ uint8 PAD[248]; /* corerev >= 1 */ ++ ++ uint8 uart1data; /* 0x400 */ ++ uint8 uart1imr; ++ uint8 uart1fcr; ++ uint8 uart1lcr; ++ uint8 uart1mcr; ++ uint8 uart1lsr; ++ uint8 uart1msr; ++ uint8 uart1scratch; ++} chipcregs_t; ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++#define CC_CHIPID 0 ++#define CC_CAPABILITIES 4 ++#define CC_JTAGCMD 0x30 ++#define CC_JTAGIR 0x34 ++#define CC_JTAGDR 0x38 ++#define CC_JTAGCTRL 0x3c ++#define CC_WATCHDOG 0x80 ++#define CC_CLKC_N 0x90 ++#define CC_CLKC_M0 0x94 ++#define CC_CLKC_M1 0x98 ++#define CC_CLKC_M2 0x9c ++#define CC_CLKC_M3 0xa0 ++#define CC_CLKDIV 0xa4 ++#define CC_SYS_CLK_CTL 0xc0 ++#define CC_OTP 0x800 ++ ++/* chipid */ ++#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ ++#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ ++#define CID_REV_SHIFT 16 /* Chip Revision shift */ ++#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ ++#define CID_PKG_SHIFT 20 /* Package Option shift */ ++#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ ++#define CID_CC_SHIFT 24 ++ ++/* capabilities */ ++#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */ ++#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ ++#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */ ++#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ ++#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */ ++#define CAP_EXTBUS 0x00000040 /* External bus present */ ++#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ ++#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ ++#define CAP_PWR_CTL 0x00040000 /* Power control */ ++#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ ++#define CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ ++#define CAP_OTPSIZE_BASE 5 /* OTP Size base */ ++#define CAP_JTAGP 0x00400000 /* JTAG Master Present */ ++#define CAP_ROM 0x00800000 /* Internal boot rom active */ ++ ++/* PLL type */ ++#define PLL_NONE 0x00000000 ++#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */ ++#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ ++#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ ++#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ ++#define PLL_TYPE5 0x00018000 /* 25Mhz, 4 dividers */ ++#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */ ++#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */ ++ ++/* corecontrol */ ++#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ ++#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ ++ ++/* Fields in the otpstatus register */ ++#define OTPS_PROGFAIL 0x80000000 ++#define OTPS_PROTECT 0x00000007 ++#define OTPS_HW_PROTECT 0x00000001 ++#define OTPS_SW_PROTECT 0x00000002 ++#define OTPS_CID_PROTECT 0x00000004 ++ ++/* Fields in the otpcontrol register */ ++#define OTPC_RECWAIT 0xff000000 ++#define OTPC_PROGWAIT 0x00ffff00 ++#define OTPC_PRW_SHIFT 8 ++#define OTPC_MAXFAIL 0x00000038 ++#define OTPC_VSEL 0x00000006 ++#define OTPC_SELVL 0x00000001 ++ ++/* Fields in otpprog */ ++#define OTPP_COL_MASK 0x000000ff ++#define OTPP_ROW_MASK 0x0000ff00 ++#define OTPP_ROW_SHIFT 8 ++#define OTPP_READERR 0x10000000 ++#define OTPP_VALUE 0x20000000 ++#define OTPP_VALUE_SHIFT 29 ++#define OTPP_READ 0x40000000 ++#define OTPP_START 0x80000000 ++#define OTPP_BUSY 0x80000000 ++ ++/* jtagcmd */ ++#define JCMD_START 0x80000000 ++#define JCMD_BUSY 0x80000000 ++#define JCMD_PAUSE 0x40000000 ++#define JCMD0_ACC_MASK 0x0000f000 ++#define JCMD0_ACC_IRDR 0x00000000 ++#define JCMD0_ACC_DR 0x00001000 ++#define JCMD0_ACC_IR 0x00002000 ++#define JCMD0_ACC_RESET 0x00003000 ++#define JCMD0_ACC_IRPDR 0x00004000 ++#define JCMD0_ACC_PDR 0x00005000 ++#define JCMD0_IRW_MASK 0x00000f00 ++#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ ++#define JCMD_ACC_IRDR 0x00000000 ++#define JCMD_ACC_DR 0x00010000 ++#define JCMD_ACC_IR 0x00020000 ++#define JCMD_ACC_RESET 0x00030000 ++#define JCMD_ACC_IRPDR 0x00040000 ++#define JCMD_ACC_PDR 0x00050000 ++#define JCMD_IRW_MASK 0x00001f00 ++#define JCMD_IRW_SHIFT 8 ++#define JCMD_DRW_MASK 0x0000003f ++ ++/* jtagctrl */ ++#define JCTRL_FORCE_CLK 4 /* Force clock */ ++#define JCTRL_EXT_EN 2 /* Enable external targets */ ++#define JCTRL_EN 1 /* Enable Jtag master */ ++ ++/* Fields in clkdiv */ ++#define CLKD_SFLASH 0x0f000000 ++#define CLKD_SFLASH_SHIFT 24 ++#define CLKD_OTP 0x000f0000 ++#define CLKD_OTP_SHIFT 16 ++#define CLKD_JTAG 0x00000f00 ++#define CLKD_JTAG_SHIFT 8 ++#define CLKD_UART 0x000000ff ++ ++/* intstatus/intmask */ ++#define CI_GPIO 0x00000001 /* gpio intr */ ++#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ ++#define CI_WDRESET 0x80000000 /* watchdog reset occurred */ ++ ++/* slow_clk_ctl */ ++#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ ++#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ ++#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ ++#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ ++#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ ++#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ ++#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ ++#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ ++#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ ++#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ ++#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ ++#define SCC_CD_SHIFT 16 ++ ++/* system_clk_ctl */ ++#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ ++#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ ++#define SYCC_FP 0x00000004 /* ForcePLLOn */ ++#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ ++#define SYCC_HR 0x00000010 /* Force HT */ ++#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4+divisor)) */ ++#define SYCC_CD_SHIFT 16 ++ ++/* gpiotimerval*/ ++#define GPIO_ONTIME_SHIFT 16 ++ ++/* clockcontrol_n */ ++#define CN_N1_MASK 0x3f /* n1 control */ ++#define CN_N2_MASK 0x3f00 /* n2 control */ ++#define CN_N2_SHIFT 8 ++#define CN_PLLC_MASK 0xf0000 /* pll control */ ++#define CN_PLLC_SHIFT 16 ++ ++/* clockcontrol_sb/pci/uart */ ++#define CC_M1_MASK 0x3f /* m1 control */ ++#define CC_M2_MASK 0x3f00 /* m2 control */ ++#define CC_M2_SHIFT 8 ++#define CC_M3_MASK 0x3f0000 /* m3 control */ ++#define CC_M3_SHIFT 16 ++#define CC_MC_MASK 0x1f000000 /* mux control */ ++#define CC_MC_SHIFT 24 ++ ++/* N3M Clock control magic field values */ ++#define CC_F6_2 0x02 /* A factor of 2 in */ ++#define CC_F6_3 0x03 /* 6-bit fields like */ ++#define CC_F6_4 0x05 /* N1, M1 or M3 */ ++#define CC_F6_5 0x09 ++#define CC_F6_6 0x11 ++#define CC_F6_7 0x21 ++ ++#define CC_F5_BIAS 5 /* 5-bit fields get this added */ ++ ++#define CC_MC_BYPASS 0x08 ++#define CC_MC_M1 0x04 ++#define CC_MC_M1M2 0x02 ++#define CC_MC_M1M2M3 0x01 ++#define CC_MC_M1M3 0x11 ++ ++/* Type 2 Clock control magic field values */ ++#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ ++#define CC_T2M2_BIAS 3 /* m2 bias */ ++ ++#define CC_T2MC_M1BYP 1 ++#define CC_T2MC_M2BYP 2 ++#define CC_T2MC_M3BYP 4 ++ ++/* Type 6 Clock control magic field values */ ++#define CC_T6_MMASK 1 /* bits of interest in m */ ++#define CC_T6_M0 120000000 /* sb clock for m = 0 */ ++#define CC_T6_M1 100000000 /* sb clock for m = 1 */ ++#define SB2MIPS_T6(sb) (2 * (sb)) ++ ++/* Common clock base */ ++#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */ ++#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */ ++ ++/* Clock control values for 200Mhz in 5350 */ ++#define CLKC_5350_N 0x0311 ++#define CLKC_5350_M 0x04020009 ++ ++/* Flash types in the chipcommon capabilities register */ ++#define FLASH_NONE 0x000 /* No flash */ ++#define SFLASH_ST 0x100 /* ST serial flash */ ++#define SFLASH_AT 0x200 /* Atmel serial flash */ ++#define PFLASH 0x700 /* Parallel flash */ ++ ++/* Bits in the config registers */ ++#define CC_CFG_EN 0x0001 /* Enable */ ++#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ ++#define CC_CFG_EM_ASYNC 0x0002 /* Async/Parallel flash */ ++#define CC_CFG_EM_SYNC 0x0004 /* Synchronous */ ++#define CC_CFG_EM_PCMCIA 0x0008 /* PCMCIA */ ++#define CC_CFG_EM_IDE 0x000a /* IDE */ ++#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ ++#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */ ++#define CC_CFG_CE 0x0080 /* Sync: Clock enable */ ++#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */ ++ ++/* Start/busy bit in flashcontrol */ ++#define SFLASH_START 0x80000000 ++#define SFLASH_BUSY SFLASH_START ++ ++/* flashcontrol opcodes for ST flashes */ ++#define SFLASH_ST_WREN 0x0006 /* Write Enable */ ++#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ ++#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ ++#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ ++#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ ++#define SFLASH_ST_PP 0x0302 /* Page Program */ ++#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ ++#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ ++#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ ++#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ ++ ++/* Status register bits for ST flashes */ ++#define SFLASH_ST_WIP 0x01 /* Write In Progress */ ++#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ ++#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ ++#define SFLASH_ST_BP_SHIFT 2 ++#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ ++ ++/* flashcontrol opcodes for Atmel flashes */ ++#define SFLASH_AT_READ 0x07e8 ++#define SFLASH_AT_PAGE_READ 0x07d2 ++#define SFLASH_AT_BUF1_READ ++#define SFLASH_AT_BUF2_READ ++#define SFLASH_AT_STATUS 0x01d7 ++#define SFLASH_AT_BUF1_WRITE 0x0384 ++#define SFLASH_AT_BUF2_WRITE 0x0387 ++#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 ++#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 ++#define SFLASH_AT_BUF1_PROGRAM 0x0288 ++#define SFLASH_AT_BUF2_PROGRAM 0x0289 ++#define SFLASH_AT_PAGE_ERASE 0x0281 ++#define SFLASH_AT_BLOCK_ERASE 0x0250 ++#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 ++#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 ++#define SFLASH_AT_BUF1_LOAD 0x0253 ++#define SFLASH_AT_BUF2_LOAD 0x0255 ++#define SFLASH_AT_BUF1_COMPARE 0x0260 ++#define SFLASH_AT_BUF2_COMPARE 0x0261 ++#define SFLASH_AT_BUF1_REPROGRAM 0x0258 ++#define SFLASH_AT_BUF2_REPROGRAM 0x0259 ++ ++/* Status register bits for Atmel flashes */ ++#define SFLASH_AT_READY 0x80 ++#define SFLASH_AT_MISMATCH 0x40 ++#define SFLASH_AT_ID_MASK 0x38 ++#define SFLASH_AT_ID_SHIFT 3 ++ ++/* OTP regions */ ++#define OTP_HW_REGION OTPS_HW_PROTECT ++#define OTP_SW_REGION OTPS_SW_PROTECT ++#define OTP_CID_REGION OTPS_CID_PROTECT ++ ++/* OTP regions (Byte offsets from otp size) */ ++#define OTP_SWLIM_OFF (-8) ++#define OTP_CIDBASE_OFF 0 ++#define OTP_CIDLIM_OFF 8 ++ ++/* Predefined OTP words (Word offset from otp size) */ ++#define OTP_BOUNDARY_OFF (-4) ++#define OTP_HWSIGN_OFF (-3) ++#define OTP_SWSIGN_OFF (-2) ++#define OTP_CIDSIGN_OFF (-1) ++ ++#define OTP_CID_OFF 0 ++#define OTP_PKG_OFF 1 ++#define OTP_FID_OFF 2 ++#define OTP_RSV_OFF 3 ++#define OTP_LIM_OFF 4 ++ ++#define OTP_SIGNATURE 0x578a ++#define OTP_MAGIC 0x4e56 ++ ++#endif /* _SBCHIPC_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbconfig.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbconfig.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,342 @@ ++/* ++ * Broadcom SiliconBackplane hardware register definitions. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _SBCONFIG_H ++#define _SBCONFIG_H ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif ++ ++/* ++ * SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ ++#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ ++#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ ++ ++#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ ++#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ ++ ++#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ ++#define SB_FLASH1 0x1fc00000 /* Flash Region 1 */ ++#define SB_FLASH1_SZ 0x00400000 /* Size of Flash Region 1 */ ++ ++#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ ++#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */ ++#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */ ++#define SB_EUART (SB_EXTIF_BASE + 0x00800000) ++#define SB_LED (SB_EXTIF_BASE + 0x00900000) ++ ++ ++/* enumeration space related defs */ ++#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ ++#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) ++#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ ++#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ ++ ++/* mips address */ ++#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++/* ++ * Sonics Configuration Space Registers. ++ */ ++#define SBIPSFLAG 0x08 ++#define SBTPSFLAG 0x18 ++#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ ++#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ ++#define SBADMATCH3 0x60 ++#define SBADMATCH2 0x68 ++#define SBADMATCH1 0x70 ++#define SBIMSTATE 0x90 ++#define SBINTVEC 0x94 ++#define SBTMSTATELOW 0x98 ++#define SBTMSTATEHIGH 0x9c ++#define SBBWA0 0xa0 ++#define SBIMCONFIGLOW 0xa8 ++#define SBIMCONFIGHIGH 0xac ++#define SBADMATCH0 0xb0 ++#define SBTMCONFIGLOW 0xb8 ++#define SBTMCONFIGHIGH 0xbc ++#define SBBCONFIG 0xc0 ++#define SBBSTATE 0xc8 ++#define SBACTCNFG 0xd8 ++#define SBFLAGST 0xe8 ++#define SBIDLOW 0xf8 ++#define SBIDHIGH 0xfc ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++typedef volatile struct _sbconfig { ++ uint32 PAD[2]; ++ uint32 sbipsflag; /* initiator port ocp slave flag */ ++ uint32 PAD[3]; ++ uint32 sbtpsflag; /* target port ocp slave flag */ ++ uint32 PAD[11]; ++ uint32 sbtmerrloga; /* (sonics >= 2.3) */ ++ uint32 PAD; ++ uint32 sbtmerrlog; /* (sonics >= 2.3) */ ++ uint32 PAD[3]; ++ uint32 sbadmatch3; /* address match3 */ ++ uint32 PAD; ++ uint32 sbadmatch2; /* address match2 */ ++ uint32 PAD; ++ uint32 sbadmatch1; /* address match1 */ ++ uint32 PAD[7]; ++ uint32 sbimstate; /* initiator agent state */ ++ uint32 sbintvec; /* interrupt mask */ ++ uint32 sbtmstatelow; /* target state */ ++ uint32 sbtmstatehigh; /* target state */ ++ uint32 sbbwa0; /* bandwidth allocation table0 */ ++ uint32 PAD; ++ uint32 sbimconfiglow; /* initiator configuration */ ++ uint32 sbimconfighigh; /* initiator configuration */ ++ uint32 sbadmatch0; /* address match0 */ ++ uint32 PAD; ++ uint32 sbtmconfiglow; /* target configuration */ ++ uint32 sbtmconfighigh; /* target configuration */ ++ uint32 sbbconfig; /* broadcast configuration */ ++ uint32 PAD; ++ uint32 sbbstate; /* broadcast state */ ++ uint32 PAD[3]; ++ uint32 sbactcnfg; /* activate configuration */ ++ uint32 PAD[3]; ++ uint32 sbflagst; /* current sbflags */ ++ uint32 PAD[3]; ++ uint32 sbidlow; /* identification */ ++ uint32 sbidhigh; /* identification */ ++} sbconfig_t; ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++/* sbipsflag */ ++#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ ++#define SBIPS_INT1_SHIFT 0 ++#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ ++#define SBIPS_INT2_SHIFT 8 ++#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ ++#define SBIPS_INT3_SHIFT 16 ++#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ ++#define SBIPS_INT4_SHIFT 24 ++ ++/* sbtpsflag */ ++#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ ++#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ ++ ++/* sbtmerrlog */ ++#define SBTMEL_CM 0x00000007 /* command */ ++#define SBTMEL_CI 0x0000ff00 /* connection id */ ++#define SBTMEL_EC 0x0f000000 /* error code */ ++#define SBTMEL_ME 0x80000000 /* multiple error */ ++ ++/* sbimstate */ ++#define SBIM_PC 0xf /* pipecount */ ++#define SBIM_AP_MASK 0x30 /* arbitration policy */ ++#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ ++#define SBIM_AP_TS 0x10 /* use timesliaces only */ ++#define SBIM_AP_TK 0x20 /* use token only */ ++#define SBIM_AP_RSV 0x30 /* reserved */ ++#define SBIM_IBE 0x20000 /* inbanderror */ ++#define SBIM_TO 0x40000 /* timeout */ ++#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ ++#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ ++ ++/* sbtmstatelow */ ++#define SBTML_RESET 0x1 /* reset */ ++#define SBTML_REJ_MASK 0x6 /* reject */ ++#define SBTML_REJ_SHIFT 1 ++#define SBTML_CLK 0x10000 /* clock enable */ ++#define SBTML_FGC 0x20000 /* force gated clocks on */ ++#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ ++#define SBTML_PE 0x40000000 /* pme enable */ ++#define SBTML_BE 0x80000000 /* bist enable */ ++ ++/* sbtmstatehigh */ ++#define SBTMH_SERR 0x1 /* serror */ ++#define SBTMH_INT 0x2 /* interrupt */ ++#define SBTMH_BUSY 0x4 /* busy */ ++#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ ++#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ ++#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */ ++#define SBTMH_GCR 0x20000000 /* gated clock request */ ++#define SBTMH_BISTF 0x40000000 /* bist failed */ ++#define SBTMH_BISTD 0x80000000 /* bist done */ ++ ++ ++/* sbbwa0 */ ++#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ ++#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ ++#define SBBWA_TAB1_SHIFT 16 ++ ++/* sbimconfiglow */ ++#define SBIMCL_STO_MASK 0x7 /* service timeout */ ++#define SBIMCL_RTO_MASK 0x70 /* request timeout */ ++#define SBIMCL_RTO_SHIFT 4 ++#define SBIMCL_CID_MASK 0xff0000 /* connection id */ ++#define SBIMCL_CID_SHIFT 16 ++ ++/* sbimconfighigh */ ++#define SBIMCH_IEM_MASK 0xc /* inband error mode */ ++#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ ++#define SBIMCH_TEM_SHIFT 4 ++#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ ++#define SBIMCH_BEM_SHIFT 6 ++ ++/* sbadmatch0 */ ++#define SBAM_TYPE_MASK 0x3 /* address type */ ++#define SBAM_AD64 0x4 /* reserved */ ++#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ ++#define SBAM_ADINT0_SHIFT 3 ++#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ ++#define SBAM_ADINT1_SHIFT 3 ++#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ ++#define SBAM_ADINT2_SHIFT 3 ++#define SBAM_ADEN 0x400 /* enable */ ++#define SBAM_ADNEG 0x800 /* negative decode */ ++#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ ++#define SBAM_BASE0_SHIFT 8 ++#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ ++#define SBAM_BASE1_SHIFT 12 ++#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ ++#define SBAM_BASE2_SHIFT 16 ++ ++/* sbtmconfiglow */ ++#define SBTMCL_CD_MASK 0xff /* clock divide */ ++#define SBTMCL_CO_MASK 0xf800 /* clock offset */ ++#define SBTMCL_CO_SHIFT 11 ++#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ ++#define SBTMCL_IF_SHIFT 18 ++#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ ++#define SBTMCL_IM_SHIFT 24 ++ ++/* sbtmconfighigh */ ++#define SBTMCH_BM_MASK 0x3 /* busy mode */ ++#define SBTMCH_RM_MASK 0x3 /* retry mode */ ++#define SBTMCH_RM_SHIFT 2 ++#define SBTMCH_SM_MASK 0x30 /* stop mode */ ++#define SBTMCH_SM_SHIFT 4 ++#define SBTMCH_EM_MASK 0x300 /* sb error mode */ ++#define SBTMCH_EM_SHIFT 8 ++#define SBTMCH_IM_MASK 0xc00 /* int mode */ ++#define SBTMCH_IM_SHIFT 10 ++ ++/* sbbconfig */ ++#define SBBC_LAT_MASK 0x3 /* sb latency */ ++#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ ++#define SBBC_MAX0_SHIFT 16 ++#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ ++#define SBBC_MAX1_SHIFT 20 ++ ++/* sbbstate */ ++#define SBBS_SRD 0x1 /* st reg disable */ ++#define SBBS_HRD 0x2 /* hold reg disable */ ++ ++/* sbidlow */ ++#define SBIDL_CS_MASK 0x3 /* config space */ ++#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ ++#define SBIDL_AR_SHIFT 3 ++#define SBIDL_SYNCH 0x40 /* sync */ ++#define SBIDL_INIT 0x80 /* initiator */ ++#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ ++#define SBIDL_MINLAT_SHIFT 8 ++#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ ++#define SBIDL_MAXLAT_SHIFT 12 ++#define SBIDL_FIRST 0x10000 /* this initiator is first */ ++#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ ++#define SBIDL_CW_SHIFT 18 ++#define SBIDL_TP_MASK 0xf00000 /* target ports */ ++#define SBIDL_TP_SHIFT 20 ++#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ ++#define SBIDL_IP_SHIFT 24 ++#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ ++#define SBIDL_RV_SHIFT 28 ++#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */ ++#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */ ++ ++/* sbidhigh */ ++#define SBIDH_RC_MASK 0x000f /* revision code */ ++#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */ ++#define SBIDH_RCE_SHIFT 8 ++#define SBCOREREV(sbidh) \ ++ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) ++#define SBIDH_CC_MASK 0x8ff0 /* core code */ ++#define SBIDH_CC_SHIFT 4 ++#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ ++#define SBIDH_VC_SHIFT 16 ++ ++#define SB_COMMIT 0xfd8 /* update buffered registers value */ ++ ++/* vendor codes */ ++#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ ++ ++/* core codes */ ++#define SB_CC 0x800 /* chipcommon core */ ++#define SB_ILINE20 0x801 /* iline20 core */ ++#define SB_SDRAM 0x803 /* sdram core */ ++#define SB_PCI 0x804 /* pci core */ ++#define SB_MIPS 0x805 /* mips core */ ++#define SB_ENET 0x806 /* enet mac core */ ++#define SB_CODEC 0x807 /* v90 codec core */ ++#define SB_USB 0x808 /* usb 1.1 host/device core */ ++#define SB_ADSL 0x809 /* ADSL core */ ++#define SB_ILINE100 0x80a /* iline100 core */ ++#define SB_IPSEC 0x80b /* ipsec core */ ++#define SB_PCMCIA 0x80d /* pcmcia core */ ++#define SB_SOCRAM 0x80e /* internal memory core */ ++#define SB_MEMC 0x80f /* memc sdram core */ ++#define SB_EXTIF 0x811 /* external interface core */ ++#define SB_D11 0x812 /* 802.11 MAC core */ ++#define SB_MIPS33 0x816 /* mips3302 core */ ++#define SB_USB11H 0x817 /* usb 1.1 host core */ ++#define SB_USB11D 0x818 /* usb 1.1 device core */ ++#define SB_USB20H 0x819 /* usb 2.0 host core */ ++#define SB_USB20D 0x81a /* usb 2.0 device core */ ++#define SB_SDIOH 0x81b /* sdio host core */ ++#define SB_ROBO 0x81c /* roboswitch core */ ++#define SB_ATA100 0x81d /* parallel ATA core */ ++#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */ ++#define SB_GIGETH 0x81f /* gigabit ethernet core */ ++#define SB_PCIE 0x820 /* pci express core */ ++#define SB_SRAMC 0x822 /* SRAM controller core */ ++#define SB_MINIMAC 0x823 /* MINI MAC/phy core */ ++ ++#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */ ++ ++/* Not really related to Silicon Backplane, but a couple of software ++ * conventions for the use the flash space: ++ */ ++ ++/* Minumum amount of flash we support */ ++#define FLASH_MIN 0x00020000 /* Minimum flash size */ ++ ++/* A boot/binary may have an embedded block that describes its size */ ++#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ ++#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */ ++#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ ++#define BISZ_TXTST_IDX 1 /* 1: text start */ ++#define BISZ_TXTEND_IDX 2 /* 2: text start */ ++#define BISZ_DATAST_IDX 3 /* 3: text start */ ++#define BISZ_DATAEND_IDX 4 /* 4: text start */ ++#define BISZ_BSSST_IDX 5 /* 5: text start */ ++#define BISZ_BSSEND_IDX 6 /* 6: text start */ ++#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */ ++ ++#endif /* _SBCONFIG_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sbextif.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbextif.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbextif.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,242 @@ ++/* ++ * Hardware-specific External Interface I/O core definitions ++ * for the BCM47xx family of SiliconBackplane-based chips. ++ * ++ * The External Interface core supports a total of three external chip selects ++ * supporting external interfaces. One of the external chip selects is ++ * used for Flash, one is used for PCMCIA, and the other may be ++ * programmed to support either a synchronous interface or an ++ * asynchronous interface. The asynchronous interface can be used to ++ * support external devices such as UARTs and the BCM2019 Bluetooth ++ * baseband processor. ++ * The external interface core also contains 2 on-chip 16550 UARTs, clock ++ * frequency control, a watchdog interrupt timer, and a GPIO interface. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _SBEXTIF_H ++#define _SBEXTIF_H ++ ++/* external interface address space */ ++#define EXTIF_PCMCIA_MEMBASE(x) (x) ++#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) ++#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) ++#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) ++#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ ++ ++/* ++ * The multiple instances of output and output enable registers ++ * are present to allow driver software for multiple cores to control ++ * gpio outputs without needing to share a single register pair. ++ */ ++struct gpiouser { ++ uint32 out; ++ uint32 outen; ++}; ++#define NGPIOUSER 5 ++ ++typedef volatile struct { ++ uint32 corecontrol; ++ uint32 extstatus; ++ uint32 PAD[2]; ++ ++ /* pcmcia control registers */ ++ uint32 pcmcia_config; ++ uint32 pcmcia_memwait; ++ uint32 pcmcia_attrwait; ++ uint32 pcmcia_iowait; ++ ++ /* programmable interface control registers */ ++ uint32 prog_config; ++ uint32 prog_waitcount; ++ ++ /* flash control registers */ ++ uint32 flash_config; ++ uint32 flash_waitcount; ++ uint32 PAD[4]; ++ ++ uint32 watchdog; ++ ++ /* clock control */ ++ uint32 clockcontrol_n; ++ uint32 clockcontrol_sb; ++ uint32 clockcontrol_pci; ++ uint32 clockcontrol_mii; ++ uint32 PAD[3]; ++ ++ /* gpio */ ++ uint32 gpioin; ++ struct gpiouser gpio[NGPIOUSER]; ++ uint32 PAD; ++ uint32 ejtagouten; ++ uint32 gpiointpolarity; ++ uint32 gpiointmask; ++ uint32 PAD[153]; ++ ++ uint8 uartdata; ++ uint8 PAD[3]; ++ uint8 uartimer; ++ uint8 PAD[3]; ++ uint8 uartfcr; ++ uint8 PAD[3]; ++ uint8 uartlcr; ++ uint8 PAD[3]; ++ uint8 uartmcr; ++ uint8 PAD[3]; ++ uint8 uartlsr; ++ uint8 PAD[3]; ++ uint8 uartmsr; ++ uint8 PAD[3]; ++ uint8 uartscratch; ++ uint8 PAD[3]; ++} extifregs_t; ++ ++/* corecontrol */ ++#define CC_UE (1 << 0) /* uart enable */ ++ ++/* extstatus */ ++#define ES_EM (1 << 0) /* endian mode (ro) */ ++#define ES_EI (1 << 1) /* external interrupt pin (ro) */ ++#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ ++ ++/* gpio bit mask */ ++#define GPIO_BIT0 (1 << 0) ++#define GPIO_BIT1 (1 << 1) ++#define GPIO_BIT2 (1 << 2) ++#define GPIO_BIT3 (1 << 3) ++#define GPIO_BIT4 (1 << 4) ++#define GPIO_BIT5 (1 << 5) ++#define GPIO_BIT6 (1 << 6) ++#define GPIO_BIT7 (1 << 7) ++ ++ ++/* pcmcia/prog/flash_config */ ++#define CF_EN (1 << 0) /* enable */ ++#define CF_EM_MASK 0xe /* mode */ ++#define CF_EM_SHIFT 1 ++#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ ++#define CF_EM_SYNC 0x2 /* synchronous mode */ ++#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ ++#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ ++#define CF_BS (1 << 5) /* byteswap */ ++#define CF_CD_MASK 0xc0 /* clock divider */ ++#define CF_CD_SHIFT 6 ++#define CF_CD_DIV2 0x0 /* backplane/2 */ ++#define CF_CD_DIV3 0x40 /* backplane/3 */ ++#define CF_CD_DIV4 0x80 /* backplane/4 */ ++#define CF_CE (1 << 8) /* clock enable */ ++#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ ++ ++/* pcmcia_memwait */ ++#define PM_W0_MASK 0x3f /* waitcount0 */ ++#define PM_W1_MASK 0x1f00 /* waitcount1 */ ++#define PM_W1_SHIFT 8 ++#define PM_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PM_W2_SHIFT 16 ++#define PM_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PM_W3_SHIFT 24 ++ ++/* pcmcia_attrwait */ ++#define PA_W0_MASK 0x3f /* waitcount0 */ ++#define PA_W1_MASK 0x1f00 /* waitcount1 */ ++#define PA_W1_SHIFT 8 ++#define PA_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PA_W2_SHIFT 16 ++#define PA_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PA_W3_SHIFT 24 ++ ++/* pcmcia_iowait */ ++#define PI_W0_MASK 0x3f /* waitcount0 */ ++#define PI_W1_MASK 0x1f00 /* waitcount1 */ ++#define PI_W1_SHIFT 8 ++#define PI_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PI_W2_SHIFT 16 ++#define PI_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PI_W3_SHIFT 24 ++ ++/* prog_waitcount */ ++#define PW_W0_MASK 0x0000001f /* waitcount0 */ ++#define PW_W1_MASK 0x00001f00 /* waitcount1 */ ++#define PW_W1_SHIFT 8 ++#define PW_W2_MASK 0x001f0000 /* waitcount2 */ ++#define PW_W2_SHIFT 16 ++#define PW_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PW_W3_SHIFT 24 ++ ++#define PW_W0 0x0000000c ++#define PW_W1 0x00000a00 ++#define PW_W2 0x00020000 ++#define PW_W3 0x01000000 ++ ++/* flash_waitcount */ ++#define FW_W0_MASK 0x1f /* waitcount0 */ ++#define FW_W1_MASK 0x1f00 /* waitcount1 */ ++#define FW_W1_SHIFT 8 ++#define FW_W2_MASK 0x1f0000 /* waitcount2 */ ++#define FW_W2_SHIFT 16 ++#define FW_W3_MASK 0x1f000000 /* waitcount3 */ ++#define FW_W3_SHIFT 24 ++ ++/* watchdog */ ++#define WATCHDOG_CLOCK 48000000 /* Hz */ ++ ++/* clockcontrol_n */ ++#define CN_N1_MASK 0x3f /* n1 control */ ++#define CN_N2_MASK 0x3f00 /* n2 control */ ++#define CN_N2_SHIFT 8 ++ ++/* clockcontrol_sb/pci/mii */ ++#define CC_M1_MASK 0x3f /* m1 control */ ++#define CC_M2_MASK 0x3f00 /* m2 control */ ++#define CC_M2_SHIFT 8 ++#define CC_M3_MASK 0x3f0000 /* m3 control */ ++#define CC_M3_SHIFT 16 ++#define CC_MC_MASK 0x1f000000 /* mux control */ ++#define CC_MC_SHIFT 24 ++ ++/* Clock control default values */ ++#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ ++#define CC_DEF_100 0x04020011 ++#define CC_DEF_33 0x11030011 ++#define CC_DEF_25 0x11050011 ++ ++/* Clock control values for 125Mhz */ ++#define CC_125_N 0x0802 ++#define CC_125_M 0x04020009 ++#define CC_125_M25 0x11090009 ++#define CC_125_M33 0x11090005 ++ ++/* Clock control magic field values */ ++#define CC_F6_2 0x02 /* A factor of 2 in */ ++#define CC_F6_3 0x03 /* 6-bit fields like */ ++#define CC_F6_4 0x05 /* N1, M1 or M3 */ ++#define CC_F6_5 0x09 ++#define CC_F6_6 0x11 ++#define CC_F6_7 0x21 ++ ++#define CC_F5_BIAS 5 /* 5-bit fields get this added */ ++ ++#define CC_MC_BYPASS 0x08 ++#define CC_MC_M1 0x04 ++#define CC_MC_M1M2 0x02 ++#define CC_MC_M1M2M3 0x01 ++#define CC_MC_M1M3 0x11 ++ ++#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ ++ ++#endif /* _SBEXTIF_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbmemc.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbmemc.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,148 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _SBMEMC_H ++#define _SBMEMC_H ++ ++#ifdef _LANGUAGE_ASSEMBLY ++ ++#define MEMC_CONTROL 0x00 ++#define MEMC_CONFIG 0x04 ++#define MEMC_REFRESH 0x08 ++#define MEMC_BISTSTAT 0x0c ++#define MEMC_MODEBUF 0x10 ++#define MEMC_BKCLS 0x14 ++#define MEMC_PRIORINV 0x18 ++#define MEMC_DRAMTIM 0x1c ++#define MEMC_INTSTAT 0x20 ++#define MEMC_INTMASK 0x24 ++#define MEMC_INTINFO 0x28 ++#define MEMC_NCDLCTL 0x30 ++#define MEMC_RDNCDLCOR 0x34 ++#define MEMC_WRNCDLCOR 0x38 ++#define MEMC_MISCDLYCTL 0x3c ++#define MEMC_DQSGATENCDL 0x40 ++#define MEMC_SPARE 0x44 ++#define MEMC_TPADDR 0x48 ++#define MEMC_TPDATA 0x4c ++#define MEMC_BARRIER 0x50 ++#define MEMC_CORE 0x54 ++ ++ ++#else ++ ++/* Sonics side: MEMC core registers */ ++typedef volatile struct sbmemcregs { ++ uint32 control; ++ uint32 config; ++ uint32 refresh; ++ uint32 biststat; ++ uint32 modebuf; ++ uint32 bkcls; ++ uint32 priorinv; ++ uint32 dramtim; ++ uint32 intstat; ++ uint32 intmask; ++ uint32 intinfo; ++ uint32 reserved1; ++ uint32 ncdlctl; ++ uint32 rdncdlcor; ++ uint32 wrncdlcor; ++ uint32 miscdlyctl; ++ uint32 dqsgatencdl; ++ uint32 spare; ++ uint32 tpaddr; ++ uint32 tpdata; ++ uint32 barrier; ++ uint32 core; ++} sbmemcregs_t; ++ ++#endif ++ ++/* MEMC Core Init values (OCP ID 0x80f) */ ++ ++/* For sdr: */ ++#define MEMC_SD_CONFIG_INIT 0x00048000 ++#define MEMC_SD_DRAMTIM2_INIT 0x000754d8 ++#define MEMC_SD_DRAMTIM3_INIT 0x000754da ++#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 ++#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ ++#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b ++#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */ ++#define MEMC_SD_CONTROL_INIT0 0x00000002 ++#define MEMC_SD_CONTROL_INIT1 0x00000008 ++#define MEMC_SD_CONTROL_INIT2 0x00000004 ++#define MEMC_SD_CONTROL_INIT3 0x00000010 ++#define MEMC_SD_CONTROL_INIT4 0x00000001 ++#define MEMC_SD_MODEBUF_INIT 0x00000000 ++#define MEMC_SD_REFRESH_INIT 0x0000840f ++ ++ ++/* This is for SDRM8X8X4 */ ++#define MEMC_SDR_INIT 0x0008 ++#define MEMC_SDR_MODE 0x32 ++#define MEMC_SDR_NCDL 0x00020032 ++#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */ ++ ++/* For ddr: */ ++#define MEMC_CONFIG_INIT 0x00048000 ++#define MEMC_DRAMTIM2_INIT 0x000754d8 ++#define MEMC_DRAMTIM25_INIT 0x000754d9 ++#define MEMC_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */ ++#define MEMC_WRNCDLCOR_INIT 0x49351200 ++#define MEMC_1_WRNCDLCOR_INIT 0x14500200 ++#define MEMC_DQSGATENCDL_INIT 0x00030000 ++#define MEMC_MISCDLYCTL_INIT 0x21061c1b ++#define MEMC_1_MISCDLYCTL_INIT 0x21021400 ++#define MEMC_NCDLCTL_INIT 0x00002001 ++#define MEMC_CONTROL_INIT0 0x00000002 ++#define MEMC_CONTROL_INIT1 0x00000008 ++#define MEMC_MODEBUF_INIT0 0x00004000 ++#define MEMC_CONTROL_INIT2 0x00000010 ++#define MEMC_MODEBUF_INIT1 0x00000100 ++#define MEMC_CONTROL_INIT3 0x00000010 ++#define MEMC_CONTROL_INIT4 0x00000008 ++#define MEMC_REFRESH_INIT 0x0000840f ++#define MEMC_CONTROL_INIT5 0x00000004 ++#define MEMC_MODEBUF_INIT2 0x00000000 ++#define MEMC_CONTROL_INIT6 0x00000010 ++#define MEMC_CONTROL_INIT7 0x00000001 ++ ++ ++/* This is for DDRM16X16X2 */ ++#define MEMC_DDR_INIT 0x0009 ++#define MEMC_DDR_MODE 0x62 ++#define MEMC_DDR_NCDL 0x0005050a ++#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */ ++ ++/* mask for sdr/ddr calibration registers */ ++#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff ++#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff ++#define MEMC_DQSGATENCDL_G_MASK 0x000000ff ++ ++/* masks for miscdlyctl registers */ ++#define MEMC_MISC_SM_MASK 0x30000000 ++#define MEMC_MISC_SM_SHIFT 28 ++#define MEMC_MISC_SD_MASK 0x0f000000 ++#define MEMC_MISC_SD_SHIFT 24 ++ ++/* hw threshhold for calculating wr/rd for sdr memc */ ++#define MEMC_CD_THRESHOLD 128 ++ ++/* Low bit of init register says if memc is ddr or sdr */ ++#define MEMC_CONFIG_DDR 0x00000001 ++ ++#endif /* _SBMEMC_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sbmips.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbmips.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbmips.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,62 @@ ++/* ++ * Broadcom SiliconBackplane MIPS definitions ++ * ++ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane ++ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits ++ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP ++ * interface. The core revision is stored in the SB ID register in SB ++ * configuration space. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _SBMIPS_H ++#define _SBMIPS_H ++ ++#include <mipsinc.h> ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ ++ ++typedef volatile struct { ++ uint32 corecontrol; ++ uint32 PAD[2]; ++ uint32 biststatus; ++ uint32 PAD[4]; ++ uint32 intstatus; ++ uint32 intmask; ++ uint32 timer; ++} mipsregs_t; ++ ++extern uint32 sb_flag(sb_t *sbh); ++extern uint sb_irq(sb_t *sbh); ++ ++extern void BCMINIT(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); ++ ++extern void *sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap); ++extern void sb_jtagm_disable(void *h); ++extern uint32 jtag_rwreg(void *h, uint32 ir, uint32 dr); ++extern void BCMINIT(sb_mips_init)(sb_t *sbh); ++extern uint32 BCMINIT(sb_mips_clock)(sb_t *sbh); ++extern bool BCMINIT(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); ++extern void BCMINIT(enable_pfc)(uint32 mode); ++extern uint32 BCMINIT(sb_memc_get_ncdl)(sb_t *sbh); ++ ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++#endif /* _SBMIPS_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sbpci.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbpci.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbpci.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,122 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions. ++ * ++ * $Id$ ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ */ ++ ++#ifndef _SBPCI_H ++#define _SBPCI_H ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif ++ ++/* Sonics side: PCI core and host control registers */ ++typedef struct sbpciregs { ++ uint32 control; /* PCI control */ ++ uint32 PAD[3]; ++ uint32 arbcontrol; /* PCI arbiter control */ ++ uint32 PAD[3]; ++ uint32 intstatus; /* Interrupt status */ ++ uint32 intmask; /* Interrupt mask */ ++ uint32 sbtopcimailbox; /* Sonics to PCI mailbox */ ++ uint32 PAD[9]; ++ uint32 bcastaddr; /* Sonics broadcast address */ ++ uint32 bcastdata; /* Sonics broadcast data */ ++ uint32 PAD[2]; ++ uint32 gpioin; /* ro: gpio input (>=rev2) */ ++ uint32 gpioout; /* rw: gpio output (>=rev2) */ ++ uint32 gpioouten; /* rw: gpio output enable (>= rev2) */ ++ uint32 gpiocontrol; /* rw: gpio control (>= rev2) */ ++ uint32 PAD[36]; ++ uint32 sbtopci0; /* Sonics to PCI translation 0 */ ++ uint32 sbtopci1; /* Sonics to PCI translation 1 */ ++ uint32 sbtopci2; /* Sonics to PCI translation 2 */ ++ uint32 PAD[445]; ++ uint16 sprom[36]; /* SPROM shadow Area */ ++ uint32 PAD[46]; ++} sbpciregs_t; ++ ++/* PCI control */ ++#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */ ++#define PCI_RST 0x02 /* Value driven out to pin */ ++#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */ ++#define PCI_CLK 0x08 /* Gate for clock driven out to pin */ ++ ++/* PCI arbiter control */ ++#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */ ++#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */ ++#define PCI_PARKID_MASK 0x06 /* Selects which agent is parked on an idle bus */ ++#define PCI_PARKID_SHIFT 1 ++#define PCI_PARKID_LAST 0 /* Last requestor */ ++#define PCI_PARKID_4710 1 /* 4710 */ ++#define PCI_PARKID_EXTREQ0 2 /* External requestor 0 */ ++#define PCI_PARKID_EXTREQ1 3 /* External requestor 1 */ ++ ++/* Interrupt status/mask */ ++#define PCI_INTA 0x01 /* PCI INTA# is asserted */ ++#define PCI_INTB 0x02 /* PCI INTB# is asserted */ ++#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */ ++#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */ ++#define PCI_PME 0x10 /* PCI PME# is asserted */ ++ ++/* (General) PCI/SB mailbox interrupts, two bits per pci function */ ++#define MAILBOX_F0_0 0x100 /* function 0, int 0 */ ++#define MAILBOX_F0_1 0x200 /* function 0, int 1 */ ++#define MAILBOX_F1_0 0x400 /* function 1, int 0 */ ++#define MAILBOX_F1_1 0x800 /* function 1, int 1 */ ++#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */ ++#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */ ++#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */ ++#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */ ++ ++/* Sonics broadcast address */ ++#define BCAST_ADDR_MASK 0xff /* Broadcast register address */ ++ ++/* Sonics to PCI translation types */ ++#define SBTOPCI0_MASK 0xfc000000 ++#define SBTOPCI1_MASK 0xfc000000 ++#define SBTOPCI2_MASK 0xc0000000 ++#define SBTOPCI_MEM 0 ++#define SBTOPCI_IO 1 ++#define SBTOPCI_CFG0 2 ++#define SBTOPCI_CFG1 3 ++#define SBTOPCI_PREF 0x4 /* prefetch enable */ ++#define SBTOPCI_BURST 0x8 /* burst enable */ ++#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */ ++#define SBTOPCI_RC_READ 0x00 /* memory read */ ++#define SBTOPCI_RC_READLINE 0x10 /* memory read line */ ++#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ ++ ++/* PCI core index in SROM shadow area */ ++#define SRSH_PI_OFFSET 0 /* first word */ ++#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ ++#define SRSH_PI_SHIFT 12 /* bit 15:12 */ ++ ++/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */ ++#define cap_list rsvd_a[0] ++#define bar0_window dev_dep[0x80 - 0x40] ++#define bar1_window dev_dep[0x84 - 0x40] ++#define sprom_control dev_dep[0x88 - 0x40] ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); ++extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); ++extern void sbpci_ban(uint16 core); ++extern int sbpci_init(sb_t *sbh); ++extern void sbpci_check(sb_t *sbh); ++ ++#endif /* !_LANGUAGE_ASSEMBLY */ ++ ++#endif /* _SBPCI_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sbsdram.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbsdram.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbsdram.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,75 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _SBSDRAM_H ++#define _SBSDRAM_H ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++/* Sonics side: SDRAM core registers */ ++typedef volatile struct sbsdramregs { ++ uint32 initcontrol; /* Generates external SDRAM initialization sequence */ ++ uint32 config; /* Initializes external SDRAM mode register */ ++ uint32 refresh; /* Controls external SDRAM refresh rate */ ++ uint32 pad1; ++ uint32 pad2; ++} sbsdramregs_t; ++ ++#endif ++ ++/* SDRAM initialization control (initcontrol) register bits */ ++#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ ++#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ ++#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ ++#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ ++#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ ++#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ ++#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ ++#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ ++#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ ++#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ ++#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ ++#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ ++#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ ++ ++/* SDRAM configuration (config) register bits */ ++#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ ++#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ ++#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ ++#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ ++#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ ++#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ ++ ++/* SDRAM refresh control (refresh) register bits */ ++#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ ++#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ ++ ++/* SDRAM Core default Init values (OCP ID 0x803) */ ++#define SDRAM_INIT MEM4MX16X2 ++#define SDRAM_CONFIG SDRAM_BURSTFULL ++#define SDRAM_REFRESH SDRAM_REF(0x40) ++ ++#define MEM1MX16 0x009 /* 2 MB */ ++#define MEM1MX16X2 0x409 /* 4 MB */ ++#define MEM2MX8X2 0x809 /* 4 MB */ ++#define MEM2MX8X4 0xc09 /* 8 MB */ ++#define MEM2MX32 0x439 /* 8 MB */ ++#define MEM4MX16 0x019 /* 8 MB */ ++#define MEM4MX16X2 0x419 /* 16 MB */ ++#define MEM8MX8X2 0x819 /* 16 MB */ ++#define MEM8MX16 0x829 /* 16 MB */ ++#define MEM4MX32 0x429 /* 16 MB */ ++#define MEM8MX8X4 0xc19 /* 32 MB */ ++#define MEM8MX16X2 0xc29 /* 32 MB */ ++ ++#endif /* _SBSDRAM_H */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sbutils.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbutils.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sbutils.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,136 @@ ++/* ++ * Misc utility routines for accessing chip-specific features ++ * of Broadcom HNBU SiliconBackplane-based chips. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _sbutils_h_ ++#define _sbutils_h_ ++ ++/* ++ * Datastructure to export all chip specific common variables ++ * public (read-only) portion of sbutils handle returned by ++ * sb_attach()/sb_kattach() ++*/ ++ ++struct sb_pub { ++ ++ uint bustype; /* SB_BUS, PCI_BUS */ ++ uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE*/ ++ uint buscorerev; /* buscore rev */ ++ uint buscoreidx; /* buscore index */ ++ int ccrev; /* chip common core rev */ ++ uint boardtype; /* board type */ ++ uint boardvendor; /* board vendor */ ++ uint chip; /* chip number */ ++ uint chiprev; /* chip revision */ ++ uint chippkg; /* chip package option */ ++ uint sonicsrev; /* sonics backplane rev */ ++}; ++ ++typedef const struct sb_pub sb_t; ++ ++/* ++ * Many of the routines below take an 'sbh' handle as their first arg. ++ * Allocate this by calling sb_attach(). Free it by calling sb_detach(). ++ * At any one time, the sbh is logically focused on one particular sb core ++ * (the "current core"). ++ * Use sb_setcore() or sb_setcoreidx() to change the association to another core. ++ */ ++ ++/* exported externs */ ++extern sb_t * BCMINIT(sb_attach)(uint pcidev, osl_t *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); ++extern sb_t * BCMINIT(sb_kattach)(void); ++extern void sb_detach(sb_t *sbh); ++extern uint BCMINIT(sb_chip)(sb_t *sbh); ++extern uint BCMINIT(sb_chiprev)(sb_t *sbh); ++extern uint BCMINIT(sb_chipcrev)(sb_t *sbh); ++extern uint BCMINIT(sb_chippkg)(sb_t *sbh); ++extern uint BCMINIT(sb_pcirev)(sb_t *sbh); ++extern bool BCMINIT(sb_war16165)(sb_t *sbh); ++extern uint BCMINIT(sb_boardvendor)(sb_t *sbh); ++extern uint BCMINIT(sb_boardtype)(sb_t *sbh); ++extern uint sb_bus(sb_t *sbh); ++extern uint sb_buscoretype(sb_t *sbh); ++extern uint sb_buscorerev(sb_t *sbh); ++extern uint sb_corelist(sb_t *sbh, uint coreid[]); ++extern uint sb_coreid(sb_t *sbh); ++extern uint sb_coreidx(sb_t *sbh); ++extern uint sb_coreunit(sb_t *sbh); ++extern uint sb_corevendor(sb_t *sbh); ++extern uint sb_corerev(sb_t *sbh); ++extern void *sb_osh(sb_t *sbh); ++extern void *sb_coreregs(sb_t *sbh); ++extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val); ++extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val); ++extern bool sb_iscoreup(sb_t *sbh); ++extern void *sb_setcoreidx(sb_t *sbh, uint coreidx); ++extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit); ++extern int sb_corebist(sb_t *sbh, uint coreid, uint coreunit); ++extern void sb_commit(sb_t *sbh); ++extern uint32 sb_base(uint32 admatch); ++extern uint32 sb_size(uint32 admatch); ++extern void sb_core_reset(sb_t *sbh, uint32 bits); ++extern void sb_core_tofixup(sb_t *sbh); ++extern void sb_core_disable(sb_t *sbh, uint32 bits); ++extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); ++extern uint32 sb_clock(sb_t *sbh); ++extern void sb_pci_setup(sb_t *sbh, uint coremask); ++extern void sb_watchdog(sb_t *sbh, uint ticks); ++extern void *sb_gpiosetcore(sb_t *sbh); ++extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioin(sb_t *sbh); ++extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val); ++extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority); ++extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority); ++ ++extern void sb_clkctl_init(sb_t *sbh); ++extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh); ++extern bool sb_clkctl_clk(sb_t *sbh, uint mode); ++extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on); ++extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, ++ void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg); ++extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to); ++extern void sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, ++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif); ++extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val); ++ ++ ++ ++/* ++* Build device path. Path size must be >= SB_DEVPATH_BUFSZ. ++* The returned path is NULL terminated and has trailing '/'. ++* Return 0 on success, nonzero otherwise. ++*/ ++extern int sb_devpath(sb_t *sbh, char *path, int size); ++ ++/* clkctl xtal what flags */ ++#define XTAL 0x1 /* primary crystal oscillator (2050) */ ++#define PLL 0x2 /* main chip pll */ ++ ++/* clkctl clk mode */ ++#define CLK_FAST 0 /* force fast (pll) clock */ ++#define CLK_DYNAMIC 2 /* enable dynamic clock control */ ++ ++ ++/* GPIO usage priorities */ ++#define GPIO_DRV_PRIORITY 0 ++#define GPIO_APP_PRIORITY 1 ++ ++/* device path */ ++#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */ ++ ++#endif /* _sbutils_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/sflash.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/sflash.h +--- linux-2.6.17/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/sflash.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,36 @@ ++/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _sflash_h_ ++#define _sflash_h_ ++ ++#include <typedefs.h> ++#include <sbchipc.h> ++ ++struct sflash { ++ uint blocksize; /* Block size */ ++ uint numblocks; /* Number of blocks */ ++ uint32 type; /* Type */ ++ uint size; /* Total size in bytes */ ++}; ++ ++/* Utility functions */ ++extern int sflash_poll(chipcregs_t *cc, uint offset); ++extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); ++extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern int sflash_erase(chipcregs_t *cc, uint offset); ++extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern struct sflash * sflash_init(chipcregs_t *cc); ++ ++#endif /* _sflash_h_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/trxhdr.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/trxhdr.h +--- linux-2.6.17/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/trxhdr.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,33 @@ ++/* ++ * TRX image file header format. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++ ++#define TRX_MAGIC 0x30524448 /* "HDR0" */ ++#define TRX_VERSION 1 ++#define TRX_MAX_LEN 0x3A0000 ++#define TRX_NO_HEADER 1 /* Do not write TRX header */ ++#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ ++#define TRX_MAX_OFFSET 3 ++ ++struct trx_header { ++ uint32 magic; /* "HDR0" */ ++ uint32 len; /* Length of file including header */ ++ uint32 crc32; /* 32-bit CRC from flag_version to end of file */ ++ uint32 flag_version; /* 0:15 flags, 16:31 version */ ++ uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ ++}; ++ ++/* Compatibility */ ++typedef struct trx_header TRXHDR, *PTRXHDR; +diff -Nur linux-2.6.17/arch/mips/bcm947xx/include/typedefs.h linux-2.6.17-owrt/arch/mips/bcm947xx/include/typedefs.h +--- linux-2.6.17/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/include/typedefs.h 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,326 @@ ++/* ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _TYPEDEFS_H_ ++#define _TYPEDEFS_H_ ++ ++ ++/* Define 'SITE_TYPEDEFS' in the compile to include a site specific ++ * typedef file "site_typedefs.h". ++ * ++ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" ++ * section of this file makes inferences about the compile environment ++ * based on defined symbols and possibly compiler pragmas. ++ * ++ * Following these two sections is the "Default Typedefs" ++ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is ++ * defined. This section has a default set of typedefs and a few ++ * proprocessor symbols (TRUE, FALSE, NULL, ...). ++ */ ++ ++#ifdef SITE_TYPEDEFS ++ ++/******************************************************************************* ++ * Site Specific Typedefs ++ *******************************************************************************/ ++ ++#include "site_typedefs.h" ++ ++#else ++ ++/******************************************************************************* ++ * Inferred Typedefs ++ *******************************************************************************/ ++ ++/* Infer the compile environment based on preprocessor symbols and pramas. ++ * Override type definitions as needed, and include configuration dependent ++ * header files to define types. ++ */ ++ ++#ifdef __cplusplus ++ ++#define TYPEDEF_BOOL ++#ifndef FALSE ++#define FALSE false ++#endif ++#ifndef TRUE ++#define TRUE true ++#endif ++ ++#else /* ! __cplusplus */ ++ ++#if defined(_WIN32) ++ ++#define TYPEDEF_BOOL ++typedef unsigned char bool; /* consistent w/BOOL */ ++ ++#endif /* _WIN32 */ ++ ++#endif /* ! __cplusplus */ ++ ++/* use the Windows ULONG_PTR type when compiling for 64 bit */ ++#if defined(_WIN64) ++#include <basetsd.h> ++#define TYPEDEF_UINTPTR ++typedef ULONG_PTR uintptr; ++#endif ++ ++#ifdef _HNDRTE_ ++typedef long unsigned int size_t; ++#endif ++ ++#ifdef _MSC_VER /* Microsoft C */ ++#define TYPEDEF_INT64 ++#define TYPEDEF_UINT64 ++typedef signed __int64 int64; ++typedef unsigned __int64 uint64; ++#endif ++ ++#if defined(MACOSX) && defined(KERNEL) ++#define TYPEDEF_BOOL ++#endif ++ ++ ++#if defined(linux) ++#define TYPEDEF_UINT ++#define TYPEDEF_USHORT ++#define TYPEDEF_ULONG ++#endif ++ ++#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_) ++#define TYPEDEF_UINT ++#define TYPEDEF_USHORT ++#endif ++ ++ ++/* Do not support the (u)int64 types with strict ansi for GNU C */ ++#if defined(__GNUC__) && defined(__STRICT_ANSI__) ++#define TYPEDEF_INT64 ++#define TYPEDEF_UINT64 ++#endif ++ ++/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode ++ * for singned or unsigned */ ++#if defined(__ICL) ++ ++#define TYPEDEF_INT64 ++ ++#if defined(__STDC__) ++#define TYPEDEF_UINT64 ++#endif ++ ++#endif /* __ICL */ ++ ++ ++#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_) ++ ++/* pick up ushort & uint from standard types.h */ ++#if defined(linux) && defined(__KERNEL__) ++ ++#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */ ++ ++#else ++ ++#include <sys/types.h> ++ ++#endif ++ ++#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_ && !_MINOSL_ */ ++ ++#if defined(MACOSX) && defined(KERNEL) ++#include <IOKit/IOTypes.h> ++#endif ++ ++ ++/* use the default typedefs in the next section of this file */ ++#define USE_TYPEDEF_DEFAULTS ++ ++#endif /* SITE_TYPEDEFS */ ++ ++ ++/******************************************************************************* ++ * Default Typedefs ++ *******************************************************************************/ ++ ++#ifdef USE_TYPEDEF_DEFAULTS ++#undef USE_TYPEDEF_DEFAULTS ++ ++#ifndef TYPEDEF_BOOL ++typedef /*@abstract@*/ unsigned char bool; ++#endif ++ ++/*----------------------- define uchar, ushort, uint, ulong ------------------*/ ++ ++#ifndef TYPEDEF_UCHAR ++typedef unsigned char uchar; ++#endif ++ ++#ifndef TYPEDEF_USHORT ++typedef unsigned short ushort; ++#endif ++ ++#ifndef TYPEDEF_UINT ++typedef unsigned int uint; ++#endif ++ ++#ifndef TYPEDEF_ULONG ++typedef unsigned long ulong; ++#endif ++ ++/*----------------------- define [u]int8/16/32/64, uintptr --------------------*/ ++ ++#ifndef TYPEDEF_UINT8 ++typedef unsigned char uint8; ++#endif ++ ++#ifndef TYPEDEF_UINT16 ++typedef unsigned short uint16; ++#endif ++ ++#ifndef TYPEDEF_UINT32 ++typedef unsigned int uint32; ++#endif ++ ++#ifndef TYPEDEF_UINT64 ++typedef unsigned long long uint64; ++#endif ++ ++#ifndef TYPEDEF_UINTPTR ++typedef unsigned int uintptr; ++#endif ++ ++#ifndef TYPEDEF_INT8 ++typedef signed char int8; ++#endif ++ ++#ifndef TYPEDEF_INT16 ++typedef signed short int16; ++#endif ++ ++#ifndef TYPEDEF_INT32 ++typedef signed int int32; ++#endif ++ ++#ifndef TYPEDEF_INT64 ++typedef signed long long int64; ++#endif ++ ++/*----------------------- define float32/64, float_t -----------------------*/ ++ ++#ifndef TYPEDEF_FLOAT32 ++typedef float float32; ++#endif ++ ++#ifndef TYPEDEF_FLOAT64 ++typedef double float64; ++#endif ++ ++/* ++ * abstracted floating point type allows for compile time selection of ++ * single or double precision arithmetic. Compiling with -DFLOAT32 ++ * selects single precision; the default is double precision. ++ */ ++ ++#ifndef TYPEDEF_FLOAT_T ++ ++#if defined(FLOAT32) ++typedef float32 float_t; ++#else /* default to double precision floating point */ ++typedef float64 float_t; ++#endif ++ ++#endif /* TYPEDEF_FLOAT_T */ ++ ++/*----------------------- define macro values -----------------------------*/ ++ ++#ifndef FALSE ++#define FALSE 0 ++#endif ++ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++ ++#ifndef NULL ++#define NULL 0 ++#endif ++ ++#ifndef OFF ++#define OFF 0 ++#endif ++ ++#ifndef ON ++#define ON 1 ++#endif ++ ++#define AUTO (-1) ++ ++/* Reclaiming text and data : ++ The following macros specify special linker sections that can be reclaimed ++ after a system is considered 'up'. ++ */ ++#if defined(__GNUC__) && defined(BCMRECLAIM) ++extern bool bcmreclaimed; ++#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data##_ini ++#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn##_ini ++#define BCMINIT(_id) _id##_ini ++#else ++#define BCMINITDATA(_data) _data ++#define BCMINITFN(_fn) _fn ++#define BCMINIT(_id) _id ++#define bcmreclaimed 0 ++#endif ++ ++/*----------------------- define PTRSZ, INLINE ----------------------------*/ ++ ++#ifndef PTRSZ ++#define PTRSZ sizeof (char*) ++#endif ++ ++#ifndef INLINE ++ ++#ifdef _MSC_VER ++ ++#define INLINE __inline ++ ++#elif __GNUC__ ++ ++#define INLINE __inline__ ++ ++#else ++ ++#define INLINE ++ ++#endif /* _MSC_VER */ ++ ++#endif /* INLINE */ ++ ++#undef TYPEDEF_BOOL ++#undef TYPEDEF_UCHAR ++#undef TYPEDEF_USHORT ++#undef TYPEDEF_UINT ++#undef TYPEDEF_ULONG ++#undef TYPEDEF_UINT8 ++#undef TYPEDEF_UINT16 ++#undef TYPEDEF_UINT32 ++#undef TYPEDEF_UINT64 ++#undef TYPEDEF_UINTPTR ++#undef TYPEDEF_INT8 ++#undef TYPEDEF_INT16 ++#undef TYPEDEF_INT32 ++#undef TYPEDEF_INT64 ++#undef TYPEDEF_FLOAT32 ++#undef TYPEDEF_FLOAT64 ++#undef TYPEDEF_FLOAT_T ++ ++#endif /* USE_TYPEDEF_DEFAULTS */ ++ ++#endif /* _TYPEDEFS_H_ */ +diff -Nur linux-2.6.17/arch/mips/bcm947xx/irq.c linux-2.6.17-owrt/arch/mips/bcm947xx/irq.c +--- linux-2.6.17/arch/mips/bcm947xx/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/irq.c 2006-06-18 15:32:25.000000000 +0200 +@@ -0,0 +1,64 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/config.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/irq.h> ++#include <linux/module.h> ++#include <linux/smp.h> ++#include <linux/types.h> ++ ++#include <asm/cpu.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/irq_cpu.h> ++ ++void plat_irq_dispatch(struct pt_regs *regs) ++{ ++ u32 cause; ++ ++ cause = read_c0_cause() & read_c0_status() & CAUSEF_IP; ++ ++ clear_c0_status(cause); ++ ++ if (cause & CAUSEF_IP7) ++ do_IRQ(7, regs); ++ if (cause & CAUSEF_IP2) ++ do_IRQ(2, regs); ++ if (cause & CAUSEF_IP3) ++ do_IRQ(3, regs); ++ if (cause & CAUSEF_IP4) ++ do_IRQ(4, regs); ++ if (cause & CAUSEF_IP5) ++ do_IRQ(5, regs); ++ if (cause & CAUSEF_IP6) ++ do_IRQ(6, regs); ++} ++ ++void __init arch_init_irq(void) ++{ ++ mips_cpu_irq_init(0); ++} +diff -Nur linux-2.6.17/arch/mips/bcm947xx/Makefile linux-2.6.17-owrt/arch/mips/bcm947xx/Makefile +--- linux-2.6.17/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/Makefile 2006-06-18 15:33:03.000000000 +0200 +@@ -0,0 +1,6 @@ ++# ++# Makefile for the BCM47xx specific kernel interface routines ++# under Linux. ++# ++ ++obj-y := irq.o prom.o setup.o time.o pci.o +diff -Nur linux-2.6.17/arch/mips/bcm947xx/pci.c linux-2.6.17-owrt/arch/mips/bcm947xx/pci.c +--- linux-2.6.17/arch/mips/bcm947xx/pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/pci.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,215 @@ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/pci.h> ++#include <linux/types.h> ++ ++#include <asm/cpu.h> ++#include <asm/io.h> ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <sbutils.h> ++#include <sbmips.h> ++#include <sbconfig.h> ++#include <sbpci.h> ++#include <bcmdevs.h> ++#include <pcicfg.h> ++ ++extern sb_t *sbh; ++extern spinlock_t sbh_lock; ++ ++ ++static int ++sb_pci_read_config(struct pci_bus *bus, unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ int ret; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int ++sb_pci_write_config(struct pci_bus *bus, unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ int ret; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++ ++static struct pci_ops sb_pci_ops = { ++ .read = sb_pci_read_config, ++ .write = sb_pci_write_config, ++}; ++ ++static struct resource sb_pci_mem_resource = { ++ .name = "SB PCI Memory resources", ++ .start = SB_ENUM_BASE, ++ .end = SB_ENUM_LIM - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource sb_pci_io_resource = { ++ .name = "SB PCI I/O resources", ++ .start = 0x000, ++ .end = 0x0FF, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct pci_controller bcm47xx_sb_pci_controller = { ++ .pci_ops = &sb_pci_ops, ++ .mem_resource = &sb_pci_mem_resource, ++ .io_resource = &sb_pci_io_resource, ++}; ++ ++static struct resource ext_pci_mem_resource = { ++ .name = "Ext PCI Memory resources", ++ .start = 0x40000000, ++ .end = 0x7fffffff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource ext_pci_io_resource = { ++ .name = "Ext PCI I/O resources", ++ .start = 0x100, ++ .end = 0x1FF, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct pci_controller bcm47xx_ext_pci_controller = { ++ .pci_ops = &sb_pci_ops, ++ .io_resource = &ext_pci_io_resource, ++ .mem_resource = &ext_pci_mem_resource, ++ .mem_offset = 0x24000000, ++}; ++ ++void bcm47xx_pci_init(void) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sbh_lock, flags); ++ sbpci_init(sbh); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ ++ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); ++ ++ register_pci_controller(&bcm47xx_sb_pci_controller); ++ register_pci_controller(&bcm47xx_ext_pci_controller); ++} ++ ++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ u8 irq; ++ ++ if (dev->bus->number == 1) ++ return 2; ++ ++ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); ++ return irq + 2; ++} ++ ++u32 pci_iobase = 0x100; ++u32 pci_membase = SB_PCI_DMA; ++ ++static void bcm47xx_fixup_device(struct pci_dev *d) ++{ ++ struct resource *res; ++ int pos, size; ++ u32 *base; ++ ++ if (d->bus->number == 0) ++ return; ++ ++ printk("PCI: Fixing up device %s\n", pci_name(d)); ++ ++ /* Fix up resource bases */ ++ for (pos = 0; pos < 6; pos++) { ++ res = &d->resource[pos]; ++ base = ((res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase); ++ if (res->end) { ++ size = res->end - res->start + 1; ++ if (*base & (size - 1)) ++ *base = (*base + size) & ~(size - 1); ++ res->start = *base; ++ res->end = res->start + size - 1; ++ *base += size; ++ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); ++ } ++ /* Fix up PCI bridge BAR0 only */ ++ if (d->bus->number == 1 && PCI_SLOT(d->devfn) == 0) ++ break; ++ } ++ /* Fix up interrupt lines */ ++ if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL)) ++ d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq; ++ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); ++} ++ ++ ++static void bcm47xx_fixup_bridge(struct pci_dev *dev) ++{ ++ if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ printk("PCI: fixing up bridge\n"); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ pcibios_enable_device(dev, ~0); ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3); ++} ++ ++/* Do platform specific device initialization at pci_enable_device() time */ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ uint coreidx; ++ unsigned long flags; ++ ++ bcm47xx_fixup_device(dev); ++ ++ /* These cores come out of reset enabled */ ++ if ((dev->bus->number != 0) || ++ (dev->device == SB_MIPS) || ++ (dev->device == SB_MIPS33) || ++ (dev->device == SB_EXTIF) || ++ (dev->device == SB_CC)) ++ return 0; ++ ++ /* Do a core reset */ ++ spin_lock_irqsave(&sbh_lock, flags); ++ coreidx = sb_coreidx(sbh); ++ if (sb_setcoreidx(sbh, PCI_SLOT(dev->devfn)) && (sb_coreid(sbh) == SB_USB)) { ++ /* ++ * The USB core requires a special bit to be set during core ++ * reset to enable host (OHCI) mode. Resetting the SB core in ++ * pcibios_enable_device() is a hack for compatibility with ++ * vanilla usb-ohci so that it does not have to know about ++ * SB. A driver that wants to use the USB core in device mode ++ * should know about SB and should reset the bit back to 0 ++ * after calling pcibios_enable_device(). ++ */ ++ sb_core_disable(sbh, sb_coreflags(sbh, 0, 0)); ++ sb_core_reset(sbh, 1 << 29); ++ } else { ++ sb_core_reset(sbh, 0); ++ } ++ sb_setcoreidx(sbh, coreidx); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ ++ return 0; ++} ++ ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcm47xx_fixup_bridge); +diff -Nur linux-2.6.17/arch/mips/bcm947xx/prom.c linux-2.6.17-owrt/arch/mips/bcm947xx/prom.c +--- linux-2.6.17/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/prom.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,59 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/sched.h> ++#include <linux/bootmem.h> ++ ++#include <asm/addrspace.h> ++#include <asm/bootinfo.h> ++#include <asm/pmon.h> ++ ++const char *get_system_type(void) ++{ ++ return "Broadcom BCM47xx"; ++} ++ ++void __init prom_init(void) ++{ ++ unsigned long mem; ++ ++ mips_machgroup = MACH_GROUP_BRCM; ++ mips_machtype = MACH_BCM47XX; ++ ++ /* Figure out memory size by finding aliases */ ++ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { ++ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == ++ *(unsigned long *)(prom_init)) ++ break; ++ } ++ ++ add_memory_region(0, mem, BOOT_MEM_RAM); ++} ++ ++unsigned long __init prom_free_prom_memory(void) ++{ ++ return 0; ++} +diff -Nur linux-2.6.17/arch/mips/bcm947xx/setup.c linux-2.6.17-owrt/arch/mips/bcm947xx/setup.c +--- linux-2.6.17/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/setup.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,158 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org> ++ * Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/init.h> ++#include <linux/types.h> ++#include <linux/tty.h> ++#include <linux/serial.h> ++#include <linux/serial_core.h> ++#include <linux/serial_reg.h> ++#include <asm/bootinfo.h> ++#include <asm/time.h> ++#include <asm/reboot.h> ++#include <linux/pm.h> ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <sbutils.h> ++#include <sbmips.h> ++#include <sbpci.h> ++#include <sbconfig.h> ++#include <bcmdevs.h> ++#include <bcmutils.h> ++#include <bcmnvram.h> ++ ++extern void bcm47xx_pci_init(void); ++extern void bcm47xx_time_init(void); ++extern void bcm47xx_timer_setup(struct irqaction *irq); ++void *sbh; ++spinlock_t sbh_lock = SPIN_LOCK_UNLOCKED; ++int boardflags; ++ ++static int ser_line = 0; ++ ++typedef struct { ++ void *regs; ++ uint irq; ++ uint baud_base; ++ uint reg_shift; ++} serial_port; ++ ++static serial_port ports[4]; ++static int num_ports = 0; ++ ++static void ++serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) ++{ ++ ports[num_ports].regs = regs; ++ ports[num_ports].irq = irq; ++ ports[num_ports].baud_base = baud_base; ++ ports[num_ports].reg_shift = reg_shift; ++ num_ports++; ++} ++ ++static void ++do_serial_add(serial_port *port) ++{ ++ void *regs; ++ uint irq; ++ uint baud_base; ++ uint reg_shift; ++ struct uart_port s; ++ ++ regs = port->regs; ++ irq = port->irq; ++ baud_base = port->baud_base; ++ reg_shift = port->reg_shift; ++ ++ memset(&s, 0, sizeof(s)); ++ ++ s.line = ser_line++; ++ s.membase = regs; ++ s.irq = irq + 2; ++ s.uartclk = baud_base; ++ s.flags = ASYNC_BOOT_AUTOCONF; ++ s.iotype = SERIAL_IO_MEM; ++ s.regshift = reg_shift; ++ ++ if (early_serial_setup(&s) != 0) { ++ printk(KERN_ERR "Serial setup failed!\n"); ++ } ++} ++ ++static void bcm47xx_machine_restart(char *command) ++{ ++ printk("Please stand by while rebooting the system...\n"); ++ ++ /* Set the watchdog timer to reset immediately */ ++ local_irq_disable(); ++ sb_watchdog(sbh, 1); ++ while (1); ++} ++ ++static void bcm47xx_machine_halt(void) ++{ ++ /* Disable interrupts and watchdog and spin forever */ ++ local_irq_disable(); ++ sb_watchdog(sbh, 0); ++ while (1); ++} ++ ++void __init plat_setup(void) ++{ ++ char *s; ++ int i; ++ ++ sbh = (void *) sb_kattach(); ++ sb_mips_init(sbh); ++ ++ bcm47xx_pci_init(); ++ ++ sb_serial_init(sbh, serial_add); ++ boardflags = getintvar(NULL, "boardflags"); ++ ++ /* reverse serial ports if the nvram variable kernel_args starts with console=ttyS1 */ ++ s = early_nvram_get("kernel_args"); ++ if (!s) s = ""; ++ if (!strncmp(s, "console=ttyS1", 13)) { ++ for (i = num_ports; i; i--) ++ do_serial_add(&ports[i - 1]); ++ } else { ++ for (i = 0; i < num_ports; i++) ++ do_serial_add(&ports[i]); ++ } ++ ++ _machine_restart = bcm47xx_machine_restart; ++ _machine_halt = bcm47xx_machine_halt; ++ pm_power_off = bcm47xx_machine_halt; ++ ++ board_time_init = bcm47xx_time_init; ++ board_timer_setup = bcm47xx_timer_setup; ++} ++ ++EXPORT_SYMBOL(sbh); ++EXPORT_SYMBOL(sbh_lock); ++EXPORT_SYMBOL(boardflags); +diff -Nur linux-2.6.17/arch/mips/bcm947xx/time.c linux-2.6.17-owrt/arch/mips/bcm947xx/time.c +--- linux-2.6.17/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17-owrt/arch/mips/bcm947xx/time.c 2006-06-18 15:29:23.000000000 +0200 +@@ -0,0 +1,59 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/config.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/serial_reg.h> ++#include <linux/interrupt.h> ++#include <asm/addrspace.h> ++#include <asm/io.h> ++#include <asm/time.h> ++ ++void __init ++bcm47xx_time_init(void) ++{ ++ unsigned int hz; ++ ++ /* ++ * Use deterministic values for initial counter interrupt ++ * so that calibrate delay avoids encountering a counter wrap. ++ */ ++ write_c0_count(0); ++ write_c0_compare(0xffff); ++ ++ hz = 200 * 1000 * 1000; ++ ++ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ ++ mips_hpt_frequency = hz / 2; ++ ++} ++ ++void __init ++bcm47xx_timer_setup(struct irqaction *irq) ++{ ++ /* Enable the timer interrupt */ ++ setup_irq(7, irq); ++} +diff -Nur linux-2.6.17/arch/mips/Kconfig linux-2.6.17-owrt/arch/mips/Kconfig +--- linux-2.6.17/arch/mips/Kconfig 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17-owrt/arch/mips/Kconfig 2006-06-18 15:29:23.000000000 +0200 +@@ -245,6 +245,17 @@ + Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and + Olivetti M700-10 workstations. + ++config BCM947XX ++ bool "Support for BCM947xx based boards" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ help ++ Support for BCM947xx based boards ++ + config LASAT + bool "LASAT Networks platforms" + select DMA_NONCOHERENT +diff -Nur linux-2.6.17/arch/mips/kernel/cpu-probe.c linux-2.6.17-owrt/arch/mips/kernel/cpu-probe.c +--- linux-2.6.17/arch/mips/kernel/cpu-probe.c 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17-owrt/arch/mips/kernel/cpu-probe.c 2006-06-18 15:29:23.000000000 +0200 +@@ -691,6 +691,28 @@ + } + + ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) ++{ ++ decode_config1(c); ++ switch (c->processor_id & 0xff00) { ++ case PRID_IMP_BCM3302: ++ c->cputype = CPU_BCM3302; ++ c->isa_level = MIPS_CPU_ISA_M32R1; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; ++ break; ++ case PRID_IMP_BCM4710: ++ c->cputype = CPU_BCM4710; ++ c->isa_level = MIPS_CPU_ISA_M32R1; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; ++ } ++} ++ + __init void cpu_probe(void) + { + struct cpuinfo_mips *c = ¤t_cpu_data; +@@ -713,6 +735,9 @@ + case PRID_COMP_SIBYTE: + cpu_probe_sibyte(c); + break; ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_SANDCRAFT: + cpu_probe_sandcraft(c); + break; +diff -Nur linux-2.6.17/arch/mips/kernel/head.S linux-2.6.17-owrt/arch/mips/kernel/head.S +--- linux-2.6.17/arch/mips/kernel/head.S 2006-06-18 12:54:51.000000000 +0200 ++++ linux-2.6.17-owrt/arch/mips/kernel/head.S 2006-06-18 15:29:23.000000000 +0200 +@@ -133,6 +133,11 @@ + j kernel_entry + nop + ++#ifdef CONFIG_BCM4710 ++#undef eret ++#define eret nop; nop; eret ++#endif ++ + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. +diff -Nur linux-2.6.17/arch/mips/kernel/proc.c linux-2.6.17-owrt/arch/mips/kernel/proc.c +--- linux-2.6.17/arch/mips/kernel/proc.c 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17-owrt/arch/mips/kernel/proc.c 2006-06-18 15:29:23.000000000 +0200 +@@ -84,6 +84,8 @@ + [CPU_VR4181] = "NEC VR4181", + [CPU_VR4181A] = "NEC VR4181A", + [CPU_SR71000] = "Sandcraft SR71000", ++ [CPU_BCM3302] = "Broadcom BCM3302", ++ [CPU_BCM4710] = "Broadcom BCM4710", + [CPU_PR4450] = "Philips PR4450", + }; + +diff -Nur linux-2.6.17/arch/mips/Makefile linux-2.6.17-owrt/arch/mips/Makefile +--- linux-2.6.17/arch/mips/Makefile 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17-owrt/arch/mips/Makefile 2006-06-18 15:29:23.000000000 +0200 +@@ -565,6 +565,13 @@ + load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 + + # ++# Broadcom BCM47XX boards ++# ++core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/ ++cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include ++load-$(CONFIG_BCM947XX) := 0xffffffff80001000 ++ ++# + # SNI RM200 PCI + # + core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/ +diff -Nur linux-2.6.17/arch/mips/mm/tlbex.c linux-2.6.17-owrt/arch/mips/mm/tlbex.c +--- linux-2.6.17/arch/mips/mm/tlbex.c 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17-owrt/arch/mips/mm/tlbex.c 2006-06-18 15:29:23.000000000 +0200 +@@ -882,6 +882,8 @@ + case CPU_4KSC: + case CPU_20KC: + case CPU_25KF: ++ case CPU_BCM3302: ++ case CPU_BCM4710: + tlbw(p); + break; + +diff -Nur linux-2.6.17/include/asm-mips/bootinfo.h linux-2.6.17-owrt/include/asm-mips/bootinfo.h +--- linux-2.6.17/include/asm-mips/bootinfo.h 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17-owrt/include/asm-mips/bootinfo.h 2006-06-18 15:29:23.000000000 +0200 +@@ -218,6 +218,12 @@ + #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ + #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ + ++/* ++ * Valid machtype for group Broadcom ++ */ ++#define MACH_GROUP_BRCM 23 /* Broadcom */ ++#define MACH_BCM47XX 1 /* Broadcom BCM47xx */ ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); +diff -Nur linux-2.6.17/include/asm-mips/cpu.h linux-2.6.17-owrt/include/asm-mips/cpu.h +--- linux-2.6.17/include/asm-mips/cpu.h 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17-owrt/include/asm-mips/cpu.h 2006-06-18 15:30:53.000000000 +0200 +@@ -104,6 +104,13 @@ + #define PRID_IMP_SR71000 0x0400 + + /* ++ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM ++ */ ++ ++#define PRID_IMP_BCM4710 0x4000 ++#define PRID_IMP_BCM3302 0x9000 ++ ++/* + * Definitions for 7:0 on legacy processors + */ + +@@ -200,7 +207,9 @@ + #define CPU_SB1A 62 + #define CPU_74K 63 + #define CPU_R14000 64 +-#define CPU_LAST 64 ++#define CPU_BCM3302 65 ++#define CPU_BCM4710 66 ++#define CPU_LAST 66 + + /* + * ISA Level encodings +diff -Nur linux-2.6.17/include/linux/pci_ids.h linux-2.6.17-owrt/include/linux/pci_ids.h +--- linux-2.6.17/include/linux/pci_ids.h 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17-owrt/include/linux/pci_ids.h 2006-06-18 15:29:23.000000000 +0200 +@@ -1906,6 +1906,7 @@ + #define PCI_DEVICE_ID_TIGON3_5901_2 0x170e + #define PCI_DEVICE_ID_BCM4401 0x4401 + #define PCI_DEVICE_ID_BCM4401B0 0x4402 ++#define PCI_DEVICE_ID_BCM4713 0x4713 + + #define PCI_VENDOR_ID_TOPIC 0x151f + #define PCI_DEVICE_ID_TOPIC_TP560 0x0000 |