summaryrefslogtreecommitdiff
path: root/target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch')
-rw-r--r--target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch2244
1 files changed, 2244 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch b/target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch
new file mode 100644
index 0000000..d1f2eb4
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch
@@ -0,0 +1,2244 @@
+diff -urN linux-3.10/sound/arm/bcm2835.c linux-rpi-3.10.y/sound/arm/bcm2835.c
+--- linux-3.10/sound/arm/bcm2835.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835.c 2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,413 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation. All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/platform_device.h>
++
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++
++#include "bcm2835.h"
++
++/* module parameters (see "Module Parameters") */
++/* SNDRV_CARDS: maximum number of cards supported by this module */
++static int index[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = -1 };
++static char *id[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = NULL };
++static int enable[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = 1 };
++
++/* HACKY global pointers needed for successive probes to work : ssp
++ * But compared against the changes we will have to do in VC audio_ipc code
++ * to export 8 audio_ipc devices as a single IPC device and then monitor all
++ * four devices in a thread, this gets things done quickly and should be easier
++ * to debug if we run into issues
++ */
++
++static struct snd_card *g_card = NULL;
++static bcm2835_chip_t *g_chip = NULL;
++
++static int snd_bcm2835_free(bcm2835_chip_t * chip)
++{
++ kfree(chip);
++ return 0;
++}
++
++/* component-destructor
++ * (see "Management of Cards and Components")
++ */
++static int snd_bcm2835_dev_free(struct snd_device *device)
++{
++ return snd_bcm2835_free(device->device_data);
++}
++
++/* chip-specific constructor
++ * (see "Management of Cards and Components")
++ */
++static int snd_bcm2835_create(struct snd_card *card,
++ struct platform_device *pdev,
++ bcm2835_chip_t ** rchip)
++{
++ bcm2835_chip_t *chip;
++ int err;
++ static struct snd_device_ops ops = {
++ .dev_free = snd_bcm2835_dev_free,
++ };
++
++ *rchip = NULL;
++
++ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
++ if (chip == NULL)
++ return -ENOMEM;
++
++ chip->card = card;
++
++ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++ if (err < 0) {
++ snd_bcm2835_free(chip);
++ return err;
++ }
++
++ *rchip = chip;
++ return 0;
++}
++
++static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
++{
++ static int dev;
++ bcm2835_chip_t *chip;
++ struct snd_card *card;
++ int err;
++
++ if (dev >= MAX_SUBSTREAMS)
++ return -ENODEV;
++
++ if (!enable[dev]) {
++ dev++;
++ return -ENOENT;
++ }
++
++ if (dev > 0)
++ goto add_register_map;
++
++ err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &g_card);
++ if (err < 0)
++ goto out;
++
++ snd_card_set_dev(g_card, &pdev->dev);
++ strcpy(g_card->driver, "BRCM bcm2835 ALSA Driver");
++ strcpy(g_card->shortname, "bcm2835 ALSA");
++ sprintf(g_card->longname, "%s", g_card->shortname);
++
++ err = snd_bcm2835_create(g_card, pdev, &chip);
++ if (err < 0) {
++ dev_err(&pdev->dev, "Failed to create bcm2835 chip\n");
++ goto out_bcm2835_create;
++ }
++
++ g_chip = chip;
++ err = snd_bcm2835_new_pcm(chip);
++ if (err < 0) {
++ dev_err(&pdev->dev, "Failed to create new BCM2835 pcm device\n");
++ goto out_bcm2835_new_pcm;
++ }
++
++ err = snd_bcm2835_new_ctl(chip);
++ if (err < 0) {
++ dev_err(&pdev->dev, "Failed to create new BCM2835 ctl\n");
++ goto out_bcm2835_new_ctl;
++ }
++
++add_register_map:
++ card = g_card;
++ chip = g_chip;
++
++ BUG_ON(!(card && chip));
++
++ chip->avail_substreams |= (1 << dev);
++ chip->pdev[dev] = pdev;
++
++ if (dev == 0) {
++ err = snd_card_register(card);
++ if (err < 0) {
++ dev_err(&pdev->dev,
++ "Failed to register bcm2835 ALSA card \n");
++ goto out_card_register;
++ }
++ platform_set_drvdata(pdev, card);
++ audio_info("bcm2835 ALSA card created!\n");
++ } else {
++ audio_info("bcm2835 ALSA chip created!\n");
++ platform_set_drvdata(pdev, (void *)dev);
++ }
++
++ dev++;
++
++ return 0;
++
++out_card_register:
++out_bcm2835_new_ctl:
++out_bcm2835_new_pcm:
++out_bcm2835_create:
++ BUG_ON(!g_card);
++ if (snd_card_free(g_card))
++ dev_err(&pdev->dev, "Failed to free Registered alsa card\n");
++ g_card = NULL;
++out:
++ dev = SNDRV_CARDS; /* stop more avail_substreams from being probed */
++ dev_err(&pdev->dev, "BCM2835 ALSA Probe failed !!\n");
++ return err;
++}
++
++static int snd_bcm2835_alsa_remove(struct platform_device *pdev)
++{
++ uint32_t idx;
++ void *drv_data;
++
++ drv_data = platform_get_drvdata(pdev);
++
++ if (drv_data == (void *)g_card) {
++ /* This is the card device */
++ snd_card_free((struct snd_card *)drv_data);
++ g_card = NULL;
++ g_chip = NULL;
++ } else {
++ idx = (uint32_t) drv_data;
++ if (g_card != NULL) {
++ BUG_ON(!g_chip);
++ /* We pass chip device numbers in audio ipc devices
++ * other than the one we registered our card with
++ */
++ idx = (uint32_t) drv_data;
++ BUG_ON(!idx || idx > MAX_SUBSTREAMS);
++ g_chip->avail_substreams &= ~(1 << idx);
++ /* There should be atleast one substream registered
++ * after we are done here, as it wil be removed when
++ * the *remove* is called for the card device
++ */
++ BUG_ON(!g_chip->avail_substreams);
++ }
++ }
++
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
++ pm_message_t state)
++{
++ return 0;
++}
++
++static int snd_bcm2835_alsa_resume(struct platform_device *pdev)
++{
++ return 0;
++}
++
++#endif
++
++static struct platform_driver bcm2835_alsa0_driver = {
++ .probe = snd_bcm2835_alsa_probe,
++ .remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++ .suspend = snd_bcm2835_alsa_suspend,
++ .resume = snd_bcm2835_alsa_resume,
++#endif
++ .driver = {
++ .name = "bcm2835_AUD0",
++ .owner = THIS_MODULE,
++ },
++};
++
++static struct platform_driver bcm2835_alsa1_driver = {
++ .probe = snd_bcm2835_alsa_probe,
++ .remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++ .suspend = snd_bcm2835_alsa_suspend,
++ .resume = snd_bcm2835_alsa_resume,
++#endif
++ .driver = {
++ .name = "bcm2835_AUD1",
++ .owner = THIS_MODULE,
++ },
++};
++
++static struct platform_driver bcm2835_alsa2_driver = {
++ .probe = snd_bcm2835_alsa_probe,
++ .remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++ .suspend = snd_bcm2835_alsa_suspend,
++ .resume = snd_bcm2835_alsa_resume,
++#endif
++ .driver = {
++ .name = "bcm2835_AUD2",
++ .owner = THIS_MODULE,
++ },
++};
++
++static struct platform_driver bcm2835_alsa3_driver = {
++ .probe = snd_bcm2835_alsa_probe,
++ .remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++ .suspend = snd_bcm2835_alsa_suspend,
++ .resume = snd_bcm2835_alsa_resume,
++#endif
++ .driver = {
++ .name = "bcm2835_AUD3",
++ .owner = THIS_MODULE,
++ },
++};
++
++static struct platform_driver bcm2835_alsa4_driver = {
++ .probe = snd_bcm2835_alsa_probe,
++ .remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++ .suspend = snd_bcm2835_alsa_suspend,
++ .resume = snd_bcm2835_alsa_resume,
++#endif
++ .driver = {
++ .name = "bcm2835_AUD4",
++ .owner = THIS_MODULE,
++ },
++};
++
++static struct platform_driver bcm2835_alsa5_driver = {
++ .probe = snd_bcm2835_alsa_probe,
++ .remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++ .suspend = snd_bcm2835_alsa_suspend,
++ .resume = snd_bcm2835_alsa_resume,
++#endif
++ .driver = {
++ .name = "bcm2835_AUD5",
++ .owner = THIS_MODULE,
++ },
++};
++
++static struct platform_driver bcm2835_alsa6_driver = {
++ .probe = snd_bcm2835_alsa_probe,
++ .remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++ .suspend = snd_bcm2835_alsa_suspend,
++ .resume = snd_bcm2835_alsa_resume,
++#endif
++ .driver = {
++ .name = "bcm2835_AUD6",
++ .owner = THIS_MODULE,
++ },
++};
++
++static struct platform_driver bcm2835_alsa7_driver = {
++ .probe = snd_bcm2835_alsa_probe,
++ .remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++ .suspend = snd_bcm2835_alsa_suspend,
++ .resume = snd_bcm2835_alsa_resume,
++#endif
++ .driver = {
++ .name = "bcm2835_AUD7",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int bcm2835_alsa_device_init(void)
++{
++ int err;
++ err = platform_driver_register(&bcm2835_alsa0_driver);
++ if (err) {
++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++ goto out;
++ }
++
++ err = platform_driver_register(&bcm2835_alsa1_driver);
++ if (err) {
++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++ goto unregister_0;
++ }
++
++ err = platform_driver_register(&bcm2835_alsa2_driver);
++ if (err) {
++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++ goto unregister_1;
++ }
++
++ err = platform_driver_register(&bcm2835_alsa3_driver);
++ if (err) {
++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++ goto unregister_2;
++ }
++
++ err = platform_driver_register(&bcm2835_alsa4_driver);
++ if (err) {
++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++ goto unregister_3;
++ }
++
++ err = platform_driver_register(&bcm2835_alsa5_driver);
++ if (err) {
++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++ goto unregister_4;
++ }
++
++ err = platform_driver_register(&bcm2835_alsa6_driver);
++ if (err) {
++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++ goto unregister_5;
++ }
++
++ err = platform_driver_register(&bcm2835_alsa7_driver);
++ if (err) {
++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++ goto unregister_6;
++ }
++
++ return 0;
++
++unregister_6:
++ platform_driver_unregister(&bcm2835_alsa6_driver);
++unregister_5:
++ platform_driver_unregister(&bcm2835_alsa5_driver);
++unregister_4:
++ platform_driver_unregister(&bcm2835_alsa4_driver);
++unregister_3:
++ platform_driver_unregister(&bcm2835_alsa3_driver);
++unregister_2:
++ platform_driver_unregister(&bcm2835_alsa2_driver);
++unregister_1:
++ platform_driver_unregister(&bcm2835_alsa1_driver);
++unregister_0:
++ platform_driver_unregister(&bcm2835_alsa0_driver);
++out:
++ return err;
++}
++
++static void bcm2835_alsa_device_exit(void)
++{
++ platform_driver_unregister(&bcm2835_alsa0_driver);
++ platform_driver_unregister(&bcm2835_alsa1_driver);
++ platform_driver_unregister(&bcm2835_alsa2_driver);
++ platform_driver_unregister(&bcm2835_alsa3_driver);
++ platform_driver_unregister(&bcm2835_alsa4_driver);
++ platform_driver_unregister(&bcm2835_alsa5_driver);
++ platform_driver_unregister(&bcm2835_alsa6_driver);
++ platform_driver_unregister(&bcm2835_alsa7_driver);
++}
++
++late_initcall(bcm2835_alsa_device_init);
++module_exit(bcm2835_alsa_device_exit);
++
++MODULE_AUTHOR("Dom Cobley");
++MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:bcm2835_alsa");
+diff -urN linux-3.10/sound/arm/bcm2835-ctl.c linux-rpi-3.10.y/sound/arm/bcm2835-ctl.c
+--- linux-3.10/sound/arm/bcm2835-ctl.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835-ctl.c 2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,200 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation. All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/jiffies.h>
++#include <linux/slab.h>
++#include <linux/time.h>
++#include <linux/wait.h>
++#include <linux/delay.h>
++#include <linux/moduleparam.h>
++#include <linux/sched.h>
++
++#include <sound/core.h>
++#include <sound/control.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/rawmidi.h>
++#include <sound/initval.h>
++#include <sound/tlv.h>
++
++#include "bcm2835.h"
++
++/* volume maximum and minimum in terms of 0.01dB */
++#define CTRL_VOL_MAX 400
++#define CTRL_VOL_MIN -10239 /* originally -10240 */
++
++
++static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ audio_info(" ... IN\n");
++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) {
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = CTRL_VOL_MIN;
++ uinfo->value.integer.max = CTRL_VOL_MAX; /* 2303 */
++ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = 1;
++ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) {
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = AUDIO_DEST_MAX-1;
++ }
++ audio_info(" ... OUT\n");
++ return 0;
++}
++
++/* toggles mute on or off depending on the value of nmute, and returns
++ * 1 if the mute value was changed, otherwise 0
++ */
++static int toggle_mute(struct bcm2835_chip *chip, int nmute)
++{
++ /* if settings are ok, just return 0 */
++ if(chip->mute == nmute)
++ return 0;
++
++ /* if the sound is muted then we need to unmute */
++ if(chip->mute == CTRL_VOL_MUTE)
++ {
++ chip->volume = chip->old_volume; /* copy the old volume back */
++ audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume);
++ }
++ else /* otherwise we mute */
++ {
++ chip->old_volume = chip->volume;
++ chip->volume = 26214; /* set volume to minimum level AKA mute */
++ audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume);
++ }
++
++ chip->mute = nmute;
++ return 1;
++}
++
++static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
++
++ BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK));
++
++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME)
++ ucontrol->value.integer.value[0] = chip2alsa(chip->volume);
++ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE)
++ ucontrol->value.integer.value[0] = chip->mute;
++ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE)
++ ucontrol->value.integer.value[0] = chip->dest;
++
++ return 0;
++}
++
++static int snd_bcm2835_ctl_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
++ int changed = 0;
++
++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) {
++ audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]);
++ if (chip->mute == CTRL_VOL_MUTE) {
++ /* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */
++ return 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */
++ }
++ if (changed
++ || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) {
++
++ chip->volume = alsa2chip(ucontrol->value.integer.value[0]);
++ changed = 1;
++ }
++
++ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
++ /* Now implemented */
++ audio_info(" Mute attempted\n");
++ changed = toggle_mute(chip, ucontrol->value.integer.value[0]);
++
++ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) {
++ if (ucontrol->value.integer.value[0] != chip->dest) {
++ chip->dest = ucontrol->value.integer.value[0];
++ changed = 1;
++ }
++ }
++
++ if (changed) {
++ if (bcm2835_audio_set_ctls(chip))
++ printk(KERN_ERR "Failed to set ALSA controls..\n");
++ }
++
++ return changed;
++}
++
++static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1);
++
++static struct snd_kcontrol_new snd_bcm2835_ctl[] = {
++ {
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "PCM Playback Volume",
++ .index = 0,
++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,
++ .private_value = PCM_PLAYBACK_VOLUME,
++ .info = snd_bcm2835_ctl_info,
++ .get = snd_bcm2835_ctl_get,
++ .put = snd_bcm2835_ctl_put,
++ .count = 1,
++ .tlv = {.p = snd_bcm2835_db_scale}
++ },
++ {
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "PCM Playback Switch",
++ .index = 0,
++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
++ .private_value = PCM_PLAYBACK_MUTE,
++ .info = snd_bcm2835_ctl_info,
++ .get = snd_bcm2835_ctl_get,
++ .put = snd_bcm2835_ctl_put,
++ .count = 1,
++ },
++ {
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "PCM Playback Route",
++ .index = 0,
++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
++ .private_value = PCM_PLAYBACK_DEVICE,
++ .info = snd_bcm2835_ctl_info,
++ .get = snd_bcm2835_ctl_get,
++ .put = snd_bcm2835_ctl_put,
++ .count = 1,
++ },
++};
++
++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip)
++{
++ int err;
++ unsigned int idx;
++
++ strcpy(chip->card->mixername, "Broadcom Mixer");
++ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) {
++ err =
++ snd_ctl_add(chip->card,
++ snd_ctl_new1(&snd_bcm2835_ctl[idx], chip));
++ if (err < 0)
++ return err;
++ }
++ return 0;
++}
+diff -urN linux-3.10/sound/arm/bcm2835.h linux-rpi-3.10.y/sound/arm/bcm2835.h
+--- linux-3.10/sound/arm/bcm2835.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835.h 2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,157 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation. All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#ifndef __SOUND_ARM_BCM2835_H
++#define __SOUND_ARM_BCM2835_H
++
++#include <linux/device.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/wait.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/pcm-indirect.h>
++#include <linux/workqueue.h>
++
++/*
++#define AUDIO_DEBUG_ENABLE
++#define AUDIO_VERBOSE_DEBUG_ENABLE
++*/
++
++/* Debug macros */
++
++#ifdef AUDIO_DEBUG_ENABLE
++#ifdef AUDIO_VERBOSE_DEBUG_ENABLE
++
++#define audio_debug(fmt, arg...) \
++ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_info(fmt, arg...) \
++ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#else
++
++#define audio_debug(fmt, arg...)
++
++#define audio_info(fmt, arg...)
++
++#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */
++
++#else
++
++#define audio_debug(fmt, arg...)
++
++#define audio_info(fmt, arg...)
++
++#endif /* AUDIO_DEBUG_ENABLE */
++
++#define audio_error(fmt, arg...) \
++ printk(KERN_ERR"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_warning(fmt, arg...) \
++ printk(KERN_WARNING"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_alert(fmt, arg...) \
++ printk(KERN_ALERT"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define MAX_SUBSTREAMS (8)
++#define AVAIL_SUBSTREAMS_MASK (0xff)
++enum {
++ CTRL_VOL_MUTE,
++ CTRL_VOL_UNMUTE
++};
++
++/* macros for alsa2chip and chip2alsa, instead of functions */
++
++#define alsa2chip(vol) (uint)(-((vol << 8) / 100)) /* convert alsa to chip volume (defined as macro rather than function call) */
++#define chip2alsa(vol) -((vol * 100) >> 8) /* convert chip to alsa volume */
++
++/* Some constants for values .. */
++typedef enum {
++ AUDIO_DEST_AUTO = 0,
++ AUDIO_DEST_HEADPHONES = 1,
++ AUDIO_DEST_HDMI = 2,
++ AUDIO_DEST_MAX,
++} SND_BCM2835_ROUTE_T;
++
++typedef enum {
++ PCM_PLAYBACK_VOLUME,
++ PCM_PLAYBACK_MUTE,
++ PCM_PLAYBACK_DEVICE,
++} SND_BCM2835_CTRL_T;
++
++/* definition of the chip-specific record */
++typedef struct bcm2835_chip {
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ /* Bitmat for valid reg_base and irq numbers */
++ uint32_t avail_substreams;
++ struct platform_device *pdev[MAX_SUBSTREAMS];
++ struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS];
++
++ int volume;
++ int old_volume; /* stores the volume value whist muted */
++ int dest;
++ int mute;
++} bcm2835_chip_t;
++
++typedef struct bcm2835_alsa_stream {
++ bcm2835_chip_t *chip;
++ struct snd_pcm_substream *substream;
++ struct snd_pcm_indirect pcm_indirect;
++
++ struct semaphore buffers_update_sem;
++ struct semaphore control_sem;
++ spinlock_t lock;
++ volatile uint32_t control;
++ volatile uint32_t status;
++
++ int open;
++ int running;
++ int draining;
++
++ unsigned int pos;
++ unsigned int buffer_size;
++ unsigned int period_size;
++
++ uint32_t enable_fifo_irq;
++ irq_handler_t fifo_irq_handler;
++
++ atomic_t retrieved;
++ struct opaque_AUDIO_INSTANCE_T *instance;
++ struct workqueue_struct *my_wq;
++ int idx;
++} bcm2835_alsa_stream_t;
++
++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip);
++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip);
++
++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream,
++ uint32_t channels, uint32_t samplerate,
++ uint32_t bps);
++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip);
++int bcm2835_audio_write(bcm2835_alsa_stream_t * alsa_stream, uint32_t count,
++ void *src);
++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream);
++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream);
++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream);
++
++#endif /* __SOUND_ARM_BCM2835_H */
+diff -urN linux-3.10/sound/arm/bcm2835-pcm.c linux-rpi-3.10.y/sound/arm/bcm2835-pcm.c
+--- linux-3.10/sound/arm/bcm2835-pcm.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835-pcm.c 2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,426 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation. All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++
++#include "bcm2835.h"
++
++/* hardware definition */
++static struct snd_pcm_hardware snd_bcm2835_playback_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++ .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
++ .rate_min = 8000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 2,
++ .buffer_bytes_max = 128 * 1024,
++ .period_bytes_min = 1 * 1024,
++ .period_bytes_max = 128 * 1024,
++ .periods_min = 1,
++ .periods_max = 128,
++};
++
++static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime)
++{
++ audio_info("Freeing up alsa stream here ..\n");
++ if (runtime->private_data)
++ kfree(runtime->private_data);
++ runtime->private_data = NULL;
++}
++
++static irqreturn_t bcm2835_playback_fifo_irq(int irq, void *dev_id)
++{
++ bcm2835_alsa_stream_t *alsa_stream = (bcm2835_alsa_stream_t *) dev_id;
++ uint32_t consumed = 0;
++ int new_period = 0;
++
++ audio_info(" .. IN\n");
++
++ audio_info("alsa_stream=%p substream=%p\n", alsa_stream,
++ alsa_stream ? alsa_stream->substream : 0);
++
++ if (alsa_stream->open)
++ consumed = bcm2835_audio_retrieve_buffers(alsa_stream);
++
++ /* We get called only if playback was triggered, So, the number of buffers we retrieve in
++ * each iteration are the buffers that have been played out already
++ */
++
++ if (alsa_stream->period_size) {
++ if ((alsa_stream->pos / alsa_stream->period_size) !=
++ ((alsa_stream->pos + consumed) / alsa_stream->period_size))
++ new_period = 1;
++ }
++ audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n",
++ alsa_stream->pos,
++ consumed,
++ alsa_stream->buffer_size,
++ (int)(alsa_stream->period_size*alsa_stream->substream->runtime->periods),
++ frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr),
++ new_period);
++ if (alsa_stream->buffer_size) {
++ alsa_stream->pos += consumed &~ (1<<30);
++ alsa_stream->pos %= alsa_stream->buffer_size;
++ }
++
++ if (alsa_stream->substream) {
++ if (new_period)
++ snd_pcm_period_elapsed(alsa_stream->substream);
++ } else {
++ audio_warning(" unexpected NULL substream\n");
++ }
++ audio_info(" .. OUT\n");
++
++ return IRQ_HANDLED;
++}
++
++/* open callback */
++static int snd_bcm2835_playback_open(struct snd_pcm_substream *substream)
++{
++ bcm2835_chip_t *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ bcm2835_alsa_stream_t *alsa_stream;
++ int idx;
++ int err;
++
++ audio_info(" .. IN (%d)\n", substream->number);
++
++ audio_info("Alsa open (%d)\n", substream->number);
++ idx = substream->number;
++
++ if (idx > MAX_SUBSTREAMS) {
++ audio_error
++ ("substream(%d) device doesn't exist max(%d) substreams allowed\n",
++ idx, MAX_SUBSTREAMS);
++ err = -ENODEV;
++ goto out;
++ }
++
++ /* Check if we are ready */
++ if (!(chip->avail_substreams & (1 << idx))) {
++ /* We are not ready yet */
++ audio_error("substream(%d) device is not ready yet\n", idx);
++ err = -EAGAIN;
++ goto out;
++ }
++
++ alsa_stream = kzalloc(sizeof(bcm2835_alsa_stream_t), GFP_KERNEL);
++ if (alsa_stream == NULL) {
++ return -ENOMEM;
++ }
++
++ /* Initialise alsa_stream */
++ alsa_stream->chip = chip;
++ alsa_stream->substream = substream;
++ alsa_stream->idx = idx;
++ chip->alsa_stream[idx] = alsa_stream;
++
++ sema_init(&alsa_stream->buffers_update_sem, 0);
++ sema_init(&alsa_stream->control_sem, 0);
++ spin_lock_init(&alsa_stream->lock);
++
++ /* Enabled in start trigger, called on each "fifo irq" after that */
++ alsa_stream->enable_fifo_irq = 0;
++ alsa_stream->fifo_irq_handler = bcm2835_playback_fifo_irq;
++
++ runtime->private_data = alsa_stream;
++ runtime->private_free = snd_bcm2835_playback_free;
++ runtime->hw = snd_bcm2835_playback_hw;
++ /* minimum 16 bytes alignment (for vchiq bulk transfers) */
++ snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
++ 16);
++
++ err = bcm2835_audio_open(alsa_stream);
++ if (err != 0) {
++ kfree(alsa_stream);
++ return err;
++ }
++
++ alsa_stream->open = 1;
++ alsa_stream->draining = 1;
++
++out:
++ audio_info(" .. OUT =%d\n", err);
++
++ return err;
++}
++
++/* close callback */
++static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream)
++{
++ /* the hardware-specific codes will be here */
++
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++ audio_info(" .. IN\n");
++ audio_info("Alsa close\n");
++
++ /*
++ * Call stop if it's still running. This happens when app
++ * is force killed and we don't get a stop trigger.
++ */
++ if (alsa_stream->running) {
++ int err;
++ err = bcm2835_audio_stop(alsa_stream);
++ alsa_stream->running = 0;
++ if (err != 0)
++ audio_error(" Failed to STOP alsa device\n");
++ }
++
++ alsa_stream->period_size = 0;
++ alsa_stream->buffer_size = 0;
++
++ if (alsa_stream->open) {
++ alsa_stream->open = 0;
++ bcm2835_audio_close(alsa_stream);
++ }
++ if (alsa_stream->chip)
++ alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL;
++ /*
++ * Do not free up alsa_stream here, it will be freed up by
++ * runtime->private_free callback we registered in *_open above
++ */
++
++ audio_info(" .. OUT\n");
++
++ return 0;
++}
++
++/* hw_params callback */
++static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params)
++{
++ int err;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ bcm2835_alsa_stream_t *alsa_stream =
++ (bcm2835_alsa_stream_t *) runtime->private_data;
++
++ audio_info(" .. IN\n");
++
++ err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
++ if (err < 0) {
++ audio_error
++ (" pcm_lib_malloc failed to allocated pages for buffers\n");
++ return err;
++ }
++
++ err = bcm2835_audio_set_params(alsa_stream, params_channels(params),
++ params_rate(params),
++ snd_pcm_format_width(params_format
++ (params)));
++ if (err < 0) {
++ audio_error(" error setting hw params\n");
++ }
++
++ bcm2835_audio_setup(alsa_stream);
++
++ /* in preparation of the stream, set the controls (volume level) of the stream */
++ bcm2835_audio_set_ctls(alsa_stream->chip);
++
++ audio_info(" .. OUT\n");
++
++ return err;
++}
++
++/* hw_free callback */
++static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++ audio_info(" .. IN\n");
++ return snd_pcm_lib_free_pages(substream);
++}
++
++/* prepare callback */
++static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream)
++{
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++ audio_info(" .. IN\n");
++
++ memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect));
++
++ alsa_stream->pcm_indirect.hw_buffer_size =
++ alsa_stream->pcm_indirect.sw_buffer_size =
++ snd_pcm_lib_buffer_bytes(substream);
++
++ alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream);
++ alsa_stream->period_size = snd_pcm_lib_period_bytes(substream);
++ alsa_stream->pos = 0;
++
++ audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n",
++ alsa_stream->buffer_size, alsa_stream->period_size,
++ alsa_stream->pos, runtime->frame_bits);
++
++ audio_info(" .. OUT\n");
++ return 0;
++}
++
++static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream,
++ struct snd_pcm_indirect *rec, size_t bytes)
++{
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++ void *src = (void *)(substream->runtime->dma_area + rec->sw_data);
++ int err;
++
++ err = bcm2835_audio_write(alsa_stream, bytes, src);
++ if (err)
++ audio_error(" Failed to transfer to alsa device (%d)\n", err);
++
++}
++
++static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream)
++{
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++ struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect;
++
++ pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max;
++ snd_pcm_indirect_playback_transfer(substream, pcm_indirect,
++ snd_bcm2835_pcm_transfer);
++ return 0;
++}
++
++/* trigger callback */
++static int snd_bcm2835_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++ int err = 0;
++
++ audio_info(" .. IN\n");
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n",
++ alsa_stream->running);
++ if (!alsa_stream->running) {
++ err = bcm2835_audio_start(alsa_stream);
++ if (err == 0) {
++ alsa_stream->pcm_indirect.hw_io =
++ alsa_stream->pcm_indirect.hw_data =
++ bytes_to_frames(runtime,
++ alsa_stream->pos);
++ substream->ops->ack(substream);
++ alsa_stream->running = 1;
++ alsa_stream->draining = 1;
++ } else {
++ audio_error(" Failed to START alsa device (%d)\n", err);
++ }
++ }
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ audio_debug
++ ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n",
++ alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING);
++ if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
++ audio_info("DRAINING\n");
++ alsa_stream->draining = 1;
++ } else {
++ audio_info("DROPPING\n");
++ alsa_stream->draining = 0;
++ }
++ if (alsa_stream->running) {
++ err = bcm2835_audio_stop(alsa_stream);
++ if (err != 0)
++ audio_error(" Failed to STOP alsa device (%d)\n", err);
++ alsa_stream->running = 0;
++ }
++ break;
++ default:
++ err = -EINVAL;
++ }
++
++ audio_info(" .. OUT\n");
++ return err;
++}
++
++/* pointer callback */
++static snd_pcm_uframes_t
++snd_bcm2835_pcm_pointer(struct snd_pcm_substream *substream)
++{
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++ audio_info(" .. IN\n");
++
++ audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0,
++ frames_to_bytes(runtime, runtime->status->hw_ptr),
++ frames_to_bytes(runtime, runtime->control->appl_ptr),
++ alsa_stream->pos);
++
++ audio_info(" .. OUT\n");
++ return snd_pcm_indirect_playback_pointer(substream,
++ &alsa_stream->pcm_indirect,
++ alsa_stream->pos);
++}
++
++static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream,
++ unsigned int cmd, void *arg)
++{
++ int ret = snd_pcm_lib_ioctl(substream, cmd, arg);
++ audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream,
++ cmd, arg, arg ? *(unsigned *)arg : 0, ret);
++ return ret;
++}
++
++/* operators */
++static struct snd_pcm_ops snd_bcm2835_playback_ops = {
++ .open = snd_bcm2835_playback_open,
++ .close = snd_bcm2835_playback_close,
++ .ioctl = snd_bcm2835_pcm_lib_ioctl,
++ .hw_params = snd_bcm2835_pcm_hw_params,
++ .hw_free = snd_bcm2835_pcm_hw_free,
++ .prepare = snd_bcm2835_pcm_prepare,
++ .trigger = snd_bcm2835_pcm_trigger,
++ .pointer = snd_bcm2835_pcm_pointer,
++ .ack = snd_bcm2835_pcm_ack,
++};
++
++/* create a pcm device */
++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip)
++{
++ struct snd_pcm *pcm;
++ int err;
++
++ audio_info(" .. IN\n");
++ err =
++ snd_pcm_new(chip->card, "bcm2835 ALSA", 0, MAX_SUBSTREAMS, 0, &pcm);
++ if (err < 0)
++ return err;
++ pcm->private_data = chip;
++ strcpy(pcm->name, "bcm2835 ALSA");
++ chip->pcm = pcm;
++ chip->dest = AUDIO_DEST_AUTO;
++ chip->volume = alsa2chip(0);
++ chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */
++ /* set operators */
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++ &snd_bcm2835_playback_ops);
++
++ /* pre-allocation of buffers */
++ /* NOTE: this may fail */
++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
++ snd_dma_continuous_data
++ (GFP_KERNEL), 64 * 1024,
++ 64 * 1024);
++
++ audio_info(" .. OUT\n");
++
++ return 0;
++}
+diff -urN linux-3.10/sound/arm/bcm2835-vchiq.c linux-rpi-3.10.y/sound/arm/bcm2835-vchiq.c
+--- linux-3.10/sound/arm/bcm2835-vchiq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835-vchiq.c 2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,879 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation. All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/device.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/fs.h>
++#include <linux/file.h>
++#include <linux/mm.h>
++#include <linux/syscalls.h>
++#include <asm/uaccess.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/atomic.h>
++#include <linux/module.h>
++#include <linux/completion.h>
++
++#include "bcm2835.h"
++
++/* ---- Include Files -------------------------------------------------------- */
++
++#include "interface/vchi/vchi.h"
++#include "vc_vchi_audioserv_defs.h"
++
++/* ---- Private Constants and Types ------------------------------------------ */
++
++#define BCM2835_AUDIO_STOP 0
++#define BCM2835_AUDIO_START 1
++#define BCM2835_AUDIO_WRITE 2
++
++/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */
++#ifdef AUDIO_DEBUG_ENABLE
++ #define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg)
++ #define LOG_WARN( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++ #define LOG_INFO( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++ #define LOG_DBG( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++#else
++ #define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg)
++ #define LOG_WARN( fmt, arg... )
++ #define LOG_INFO( fmt, arg... )
++ #define LOG_DBG( fmt, arg... )
++#endif
++
++typedef struct opaque_AUDIO_INSTANCE_T {
++ uint32_t num_connections;
++ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS];
++ struct completion msg_avail_comp;
++ struct mutex vchi_mutex;
++ bcm2835_alsa_stream_t *alsa_stream;
++ int32_t result;
++ short peer_version;
++} AUDIO_INSTANCE_T;
++
++bool force_bulk = false;
++
++/* ---- Private Variables ---------------------------------------------------- */
++
++/* ---- Private Function Prototypes ------------------------------------------ */
++
++/* ---- Private Functions ---------------------------------------------------- */
++
++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream);
++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream);
++static int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream,
++ uint32_t count, void *src);
++
++typedef struct {
++ struct work_struct my_work;
++ bcm2835_alsa_stream_t *alsa_stream;
++ int cmd;
++ void *src;
++ uint32_t count;
++} my_work_t;
++
++static void my_wq_function(struct work_struct *work)
++{
++ my_work_t *w = (my_work_t *) work;
++ int ret = -9;
++ LOG_DBG(" .. IN %p:%d\n", w->alsa_stream, w->cmd);
++ switch (w->cmd) {
++ case BCM2835_AUDIO_START:
++ ret = bcm2835_audio_start_worker(w->alsa_stream);
++ break;
++ case BCM2835_AUDIO_STOP:
++ ret = bcm2835_audio_stop_worker(w->alsa_stream);
++ break;
++ case BCM2835_AUDIO_WRITE:
++ ret = bcm2835_audio_write_worker(w->alsa_stream, w->count,
++ w->src);
++ break;
++ default:
++ LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd);
++ break;
++ }
++ kfree((void *)work);
++ LOG_DBG(" .. OUT %d\n", ret);
++}
++
++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream)
++{
++ int ret = -1;
++ LOG_DBG(" .. IN\n");
++ if (alsa_stream->my_wq) {
++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++ /*--- Queue some work (item 1) ---*/
++ if (work) {
++ INIT_WORK((struct work_struct *)work, my_wq_function);
++ work->alsa_stream = alsa_stream;
++ work->cmd = BCM2835_AUDIO_START;
++ if (queue_work
++ (alsa_stream->my_wq, (struct work_struct *)work))
++ ret = 0;
++ } else
++ LOG_ERR(" .. Error: NULL work kmalloc\n");
++ }
++ LOG_DBG(" .. OUT %d\n", ret);
++ return ret;
++}
++
++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream)
++{
++ int ret = -1;
++ LOG_DBG(" .. IN\n");
++ if (alsa_stream->my_wq) {
++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++ /*--- Queue some work (item 1) ---*/
++ if (work) {
++ INIT_WORK((struct work_struct *)work, my_wq_function);
++ work->alsa_stream = alsa_stream;
++ work->cmd = BCM2835_AUDIO_STOP;
++ if (queue_work
++ (alsa_stream->my_wq, (struct work_struct *)work))
++ ret = 0;
++ } else
++ LOG_ERR(" .. Error: NULL work kmalloc\n");
++ }
++ LOG_DBG(" .. OUT %d\n", ret);
++ return ret;
++}
++
++int bcm2835_audio_write(bcm2835_alsa_stream_t *alsa_stream,
++ uint32_t count, void *src)
++{
++ int ret = -1;
++ LOG_DBG(" .. IN\n");
++ if (alsa_stream->my_wq) {
++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++ /*--- Queue some work (item 1) ---*/
++ if (work) {
++ INIT_WORK((struct work_struct *)work, my_wq_function);
++ work->alsa_stream = alsa_stream;
++ work->cmd = BCM2835_AUDIO_WRITE;
++ work->src = src;
++ work->count = count;
++ if (queue_work
++ (alsa_stream->my_wq, (struct work_struct *)work))
++ ret = 0;
++ } else
++ LOG_ERR(" .. Error: NULL work kmalloc\n");
++ }
++ LOG_DBG(" .. OUT %d\n", ret);
++ return ret;
++}
++
++void my_workqueue_init(bcm2835_alsa_stream_t * alsa_stream)
++{
++ alsa_stream->my_wq = create_workqueue("my_queue");
++ return;
++}
++
++void my_workqueue_quit(bcm2835_alsa_stream_t * alsa_stream)
++{
++ if (alsa_stream->my_wq) {
++ flush_workqueue(alsa_stream->my_wq);
++ destroy_workqueue(alsa_stream->my_wq);
++ alsa_stream->my_wq = NULL;
++ }
++ return;
++}
++
++static void audio_vchi_callback(void *param,
++ const VCHI_CALLBACK_REASON_T reason,
++ void *msg_handle)
++{
++ AUDIO_INSTANCE_T *instance = (AUDIO_INSTANCE_T *) param;
++ int32_t status;
++ int32_t msg_len;
++ VC_AUDIO_MSG_T m;
++ bcm2835_alsa_stream_t *alsa_stream = 0;
++ LOG_DBG(" .. IN instance=%p, param=%p, reason=%d, handle=%p\n",
++ instance, param, reason, msg_handle);
++
++ if (!instance || reason != VCHI_CALLBACK_MSG_AVAILABLE) {
++ return;
++ }
++ alsa_stream = instance->alsa_stream;
++ status = vchi_msg_dequeue(instance->vchi_handle[0],
++ &m, sizeof m, &msg_len, VCHI_FLAGS_NONE);
++ if (m.type == VC_AUDIO_MSG_TYPE_RESULT) {
++ LOG_DBG
++ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n",
++ instance, m.u.result.success);
++ instance->result = m.u.result.success;
++ complete(&instance->msg_avail_comp);
++ } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) {
++ irq_handler_t callback = (irq_handler_t) m.u.complete.callback;
++ LOG_DBG
++ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n",
++ instance, m.u.complete.count);
++ if (alsa_stream && callback) {
++ atomic_add(m.u.complete.count, &alsa_stream->retrieved);
++ callback(0, alsa_stream);
++ } else {
++ LOG_DBG(" .. unexpected alsa_stream=%p, callback=%p\n",
++ alsa_stream, callback);
++ }
++ } else {
++ LOG_DBG(" .. unexpected m.type=%d\n", m.type);
++ }
++ LOG_DBG(" .. OUT\n");
++}
++
++static AUDIO_INSTANCE_T *vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance,
++ VCHI_CONNECTION_T **
++ vchi_connections,
++ uint32_t num_connections)
++{
++ uint32_t i;
++ AUDIO_INSTANCE_T *instance;
++ int status;
++
++ LOG_DBG("%s: start", __func__);
++
++ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) {
++ LOG_ERR("%s: unsupported number of connections %u (max=%u)\n",
++ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS);
++
++ return NULL;
++ }
++ /* Allocate memory for this instance */
++ instance = kmalloc(sizeof(*instance), GFP_KERNEL);
++
++ memset(instance, 0, sizeof(*instance));
++ instance->num_connections = num_connections;
++
++ /* Create a lock for exclusive, serialized VCHI connection access */
++ mutex_init(&instance->vchi_mutex);
++ /* Open the VCHI service connections */
++ for (i = 0; i < num_connections; i++) {
++ SERVICE_CREATION_T params = {
++ VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER),
++ VC_AUDIO_SERVER_NAME, // 4cc service code
++ vchi_connections[i], // passed in fn pointers
++ 0, // rx fifo size (unused)
++ 0, // tx fifo size (unused)
++ audio_vchi_callback, // service callback
++ instance, // service callback parameter
++ 1, //TODO: remove VCOS_FALSE, // unaligned bulk recieves
++ 1, //TODO: remove VCOS_FALSE, // unaligned bulk transmits
++ 0 // want crc check on bulk transfers
++ };
++
++ status = vchi_service_open(vchi_instance, &params,
++ &instance->vchi_handle[i]);
++ if (status) {
++ LOG_ERR
++ ("%s: failed to open VCHI service connection (status=%d)\n",
++ __func__, status);
++
++ goto err_close_services;
++ }
++ /* Finished with the service for now */
++ vchi_service_release(instance->vchi_handle[i]);
++ }
++
++ return instance;
++
++err_close_services:
++ for (i = 0; i < instance->num_connections; i++) {
++ vchi_service_close(instance->vchi_handle[i]);
++ }
++
++ kfree(instance);
++
++ return NULL;
++}
++
++static int32_t vc_vchi_audio_deinit(AUDIO_INSTANCE_T * instance)
++{
++ uint32_t i;
++
++ LOG_DBG(" .. IN\n");
++
++ if (instance == NULL) {
++ LOG_ERR("%s: invalid handle %p\n", __func__, instance);
++
++ return -1;
++ }
++
++ LOG_DBG(" .. about to lock (%d)\n", instance->num_connections);
++ if(mutex_lock_interruptible(&instance->vchi_mutex))
++ {
++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++ return -EINTR;
++ }
++
++ /* Close all VCHI service connections */
++ for (i = 0; i < instance->num_connections; i++) {
++ int32_t success;
++ LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]);
++ vchi_service_use(instance->vchi_handle[i]);
++
++ success = vchi_service_close(instance->vchi_handle[i]);
++ if (success != 0) {
++ LOG_ERR
++ ("%s: failed to close VCHI service connection (status=%d)\n",
++ __func__, success);
++ }
++ }
++
++ mutex_unlock(&instance->vchi_mutex);
++
++ kfree(instance);
++
++ LOG_DBG(" .. OUT\n");
++
++ return 0;
++}
++
++static int bcm2835_audio_open_connection(bcm2835_alsa_stream_t * alsa_stream)
++{
++ static VCHI_INSTANCE_T vchi_instance;
++ static VCHI_CONNECTION_T *vchi_connection;
++ AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++ int ret;
++ LOG_DBG(" .. IN\n");
++
++ LOG_INFO("%s: start", __func__);
++ //BUG_ON(instance);
++ if (instance) {
++ LOG_ERR("%s: VCHI instance already open (%p)\n",
++ __func__, instance);
++ instance->alsa_stream = alsa_stream;
++ alsa_stream->instance = instance;
++ ret = 0; // xxx todo -1;
++ goto err_free_mem;
++ }
++
++ /* Initialize and create a VCHI connection */
++ ret = vchi_initialise(&vchi_instance);
++ if (ret != 0) {
++ LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n",
++ __func__, ret);
++
++ ret = -EIO;
++ goto err_free_mem;
++ }
++ ret = vchi_connect(NULL, 0, vchi_instance);
++ if (ret != 0) {
++ LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n",
++ __func__, ret);
++
++ ret = -EIO;
++ goto err_free_mem;
++ }
++
++ /* Initialize an instance of the audio service */
++ instance = vc_vchi_audio_init(vchi_instance, &vchi_connection, 1);
++
++ if (instance == NULL /*|| audio_handle != instance */ ) {
++ LOG_ERR("%s: failed to initialize audio service\n", __func__);
++
++ ret = -EPERM;
++ goto err_free_mem;
++ }
++
++ instance->alsa_stream = alsa_stream;
++ alsa_stream->instance = instance;
++
++ LOG_DBG(" success !\n");
++err_free_mem:
++ LOG_DBG(" .. OUT\n");
++
++ return ret;
++}
++
++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream)
++{
++ AUDIO_INSTANCE_T *instance;
++ VC_AUDIO_MSG_T m;
++ int32_t success;
++ int ret;
++ LOG_DBG(" .. IN\n");
++
++ my_workqueue_init(alsa_stream);
++
++ ret = bcm2835_audio_open_connection(alsa_stream);
++ if (ret != 0) {
++ ret = -1;
++ goto exit;
++ }
++ instance = alsa_stream->instance;
++
++ if(mutex_lock_interruptible(&instance->vchi_mutex))
++ {
++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++ return -EINTR;
++ }
++ vchi_service_use(instance->vchi_handle[0]);
++
++ m.type = VC_AUDIO_MSG_TYPE_OPEN;
++
++ /* Send the message to the videocore */
++ success = vchi_msg_queue(instance->vchi_handle[0],
++ &m, sizeof m,
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++ if (success != 0) {
++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++ __func__, success);
++
++ ret = -1;
++ goto unlock;
++ }
++
++ ret = 0;
++
++unlock:
++ vchi_service_release(instance->vchi_handle[0]);
++ mutex_unlock(&instance->vchi_mutex);
++exit:
++ LOG_DBG(" .. OUT\n");
++ return ret;
++}
++
++static int bcm2835_audio_set_ctls_chan(bcm2835_alsa_stream_t * alsa_stream,
++ bcm2835_chip_t * chip)
++{
++ VC_AUDIO_MSG_T m;
++ AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++ int32_t success;
++ int ret;
++ LOG_DBG(" .. IN\n");
++
++ LOG_INFO
++ (" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume);
++
++ if(mutex_lock_interruptible(&instance->vchi_mutex))
++ {
++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++ return -EINTR;
++ }
++ vchi_service_use(instance->vchi_handle[0]);
++
++ instance->result = -1;
++
++ m.type = VC_AUDIO_MSG_TYPE_CONTROL;
++ m.u.control.dest = chip->dest;
++ m.u.control.volume = chip->volume;
++
++ /* Create the message available completion */
++ init_completion(&instance->msg_avail_comp);
++
++ /* Send the message to the videocore */
++ success = vchi_msg_queue(instance->vchi_handle[0],
++ &m, sizeof m,
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++ if (success != 0) {
++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++ __func__, success);
++
++ ret = -1;
++ goto unlock;
++ }
++
++ /* We are expecting a reply from the videocore */
++ ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++ if (ret) {
++ LOG_ERR("%s: failed on waiting for event (status=%d)\n",
++ __func__, success);
++ goto unlock;
++ }
++
++ if (instance->result != 0) {
++ LOG_ERR("%s: result=%d\n", __func__, instance->result);
++
++ ret = -1;
++ goto unlock;
++ }
++
++ ret = 0;
++
++unlock:
++ vchi_service_release(instance->vchi_handle[0]);
++ mutex_unlock(&instance->vchi_mutex);
++
++ LOG_DBG(" .. OUT\n");
++ return ret;
++}
++
++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip)
++{
++ int i;
++ int ret = 0;
++ LOG_DBG(" .. IN\n");
++
++ /* change ctls for all substreams */
++ for (i = 0; i < MAX_SUBSTREAMS; i++) {
++ if (chip->avail_substreams & (1 << i)) {
++ if (!chip->alsa_stream[i])
++ {
++ LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams);
++ ret = 0;
++ }
++ else if (bcm2835_audio_set_ctls_chan /* returns 0 on success */
++ (chip->alsa_stream[i], chip) != 0)
++ {
++ LOG_DBG("Couldn't set the controls for stream %d\n", i);
++ ret = -1;
++ }
++ else LOG_DBG(" Controls set for stream %d\n", i);
++ }
++ }
++ LOG_DBG(" .. OUT ret=%d\n", ret);
++ return ret;
++}
++
++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream,
++ uint32_t channels, uint32_t samplerate,
++ uint32_t bps)
++{
++ VC_AUDIO_MSG_T m;
++ AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++ int32_t success;
++ int ret;
++ LOG_DBG(" .. IN\n");
++
++ LOG_INFO
++ (" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n",
++ channels, samplerate, bps);
++
++ /* resend ctls - alsa_stream may not have been open when first send */
++ ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip);
++ if (ret != 0) {
++ LOG_ERR(" Alsa controls not supported\n");
++ return -EINVAL;
++ }
++
++ if(mutex_lock_interruptible(&instance->vchi_mutex))
++ {
++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++ return -EINTR;
++ }
++ vchi_service_use(instance->vchi_handle[0]);
++
++ instance->result = -1;
++
++ m.type = VC_AUDIO_MSG_TYPE_CONFIG;
++ m.u.config.channels = channels;
++ m.u.config.samplerate = samplerate;
++ m.u.config.bps = bps;
++
++ /* Create the message available completion */
++ init_completion(&instance->msg_avail_comp);
++
++ /* Send the message to the videocore */
++ success = vchi_msg_queue(instance->vchi_handle[0],
++ &m, sizeof m,
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++ if (success != 0) {
++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++ __func__, success);
++
++ ret = -1;
++ goto unlock;
++ }
++
++ /* We are expecting a reply from the videocore */
++ ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++ if (ret) {
++ LOG_ERR("%s: failed on waiting for event (status=%d)\n",
++ __func__, success);
++ goto unlock;
++ }
++
++ if (instance->result != 0) {
++ LOG_ERR("%s: result=%d", __func__, instance->result);
++
++ ret = -1;
++ goto unlock;
++ }
++
++ ret = 0;
++
++unlock:
++ vchi_service_release(instance->vchi_handle[0]);
++ mutex_unlock(&instance->vchi_mutex);
++
++ LOG_DBG(" .. OUT\n");
++ return ret;
++}
++
++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream)
++{
++ LOG_DBG(" .. IN\n");
++
++ LOG_DBG(" .. OUT\n");
++
++ return 0;
++}
++
++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream)
++{
++ VC_AUDIO_MSG_T m;
++ AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++ int32_t success;
++ int ret;
++ LOG_DBG(" .. IN\n");
++
++ if(mutex_lock_interruptible(&instance->vchi_mutex))
++ {
++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++ return -EINTR;
++ }
++ vchi_service_use(instance->vchi_handle[0]);
++
++ m.type = VC_AUDIO_MSG_TYPE_START;
++
++ /* Send the message to the videocore */
++ success = vchi_msg_queue(instance->vchi_handle[0],
++ &m, sizeof m,
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++ if (success != 0) {
++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++ __func__, success);
++
++ ret = -1;
++ goto unlock;
++ }
++
++ ret = 0;
++
++unlock:
++ vchi_service_release(instance->vchi_handle[0]);
++ mutex_unlock(&instance->vchi_mutex);
++ LOG_DBG(" .. OUT\n");
++ return ret;
++}
++
++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream)
++{
++ VC_AUDIO_MSG_T m;
++ AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++ int32_t success;
++ int ret;
++ LOG_DBG(" .. IN\n");
++
++ if(mutex_lock_interruptible(&instance->vchi_mutex))
++ {
++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++ return -EINTR;
++ }
++ vchi_service_use(instance->vchi_handle[0]);
++
++ m.type = VC_AUDIO_MSG_TYPE_STOP;
++ m.u.stop.draining = alsa_stream->draining;
++
++ /* Send the message to the videocore */
++ success = vchi_msg_queue(instance->vchi_handle[0],
++ &m, sizeof m,
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++ if (success != 0) {
++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++ __func__, success);
++
++ ret = -1;
++ goto unlock;
++ }
++
++ ret = 0;
++
++unlock:
++ vchi_service_release(instance->vchi_handle[0]);
++ mutex_unlock(&instance->vchi_mutex);
++ LOG_DBG(" .. OUT\n");
++ return ret;
++}
++
++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream)
++{
++ VC_AUDIO_MSG_T m;
++ AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++ int32_t success;
++ int ret;
++ LOG_DBG(" .. IN\n");
++
++ my_workqueue_quit(alsa_stream);
++
++ if(mutex_lock_interruptible(&instance->vchi_mutex))
++ {
++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++ return -EINTR;
++ }
++ vchi_service_use(instance->vchi_handle[0]);
++
++ m.type = VC_AUDIO_MSG_TYPE_CLOSE;
++
++ /* Create the message available completion */
++ init_completion(&instance->msg_avail_comp);
++
++ /* Send the message to the videocore */
++ success = vchi_msg_queue(instance->vchi_handle[0],
++ &m, sizeof m,
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++ if (success != 0) {
++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++ __func__, success);
++ ret = -1;
++ goto unlock;
++ }
++
++ ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++ if (ret) {
++ LOG_ERR("%s: failed on waiting for event (status=%d)",
++ __func__, success);
++ goto unlock;
++ }
++ if (instance->result != 0) {
++ LOG_ERR("%s: failed result (status=%d)",
++ __func__, instance->result);
++
++ ret = -1;
++ goto unlock;
++ }
++
++ ret = 0;
++
++unlock:
++ vchi_service_release(instance->vchi_handle[0]);
++ mutex_unlock(&instance->vchi_mutex);
++
++ /* Stop the audio service */
++ if (instance) {
++ vc_vchi_audio_deinit(instance);
++ alsa_stream->instance = NULL;
++ }
++ LOG_DBG(" .. OUT\n");
++ return ret;
++}
++
++int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream,
++ uint32_t count, void *src)
++{
++ VC_AUDIO_MSG_T m;
++ AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++ int32_t success;
++ int ret;
++
++ LOG_DBG(" .. IN\n");
++
++ LOG_INFO(" Writing %d bytes from %p\n", count, src);
++
++ if(mutex_lock_interruptible(&instance->vchi_mutex))
++ {
++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++ return -EINTR;
++ }
++ vchi_service_use(instance->vchi_handle[0]);
++
++ if ( instance->peer_version==0 && vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0 ) {
++ LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version);
++ }
++ m.type = VC_AUDIO_MSG_TYPE_WRITE;
++ m.u.write.count = count;
++ // old version uses bulk, new version uses control
++ m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0:4000;
++ m.u.write.callback = alsa_stream->fifo_irq_handler;
++ m.u.write.cookie = alsa_stream;
++ m.u.write.silence = src == NULL;
++
++ /* Send the message to the videocore */
++ success = vchi_msg_queue(instance->vchi_handle[0],
++ &m, sizeof m,
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++ if (success != 0) {
++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++ __func__, success);
++
++ ret = -1;
++ goto unlock;
++ }
++ if (!m.u.write.silence) {
++ if (m.u.write.max_packet == 0) {
++ /* Send the message to the videocore */
++ success = vchi_bulk_queue_transmit(instance->vchi_handle[0],
++ src, count,
++ 0 *
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED
++ +
++ 1 *
++ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ,
++ NULL);
++ } else {
++ while (count > 0) {
++ int bytes = min((int)m.u.write.max_packet, (int)count);
++ success = vchi_msg_queue(instance->vchi_handle[0],
++ src, bytes,
++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++ src = (char *)src + bytes;
++ count -= bytes;
++ }
++ }
++ if (success != 0) {
++ LOG_ERR
++ ("%s: failed on vchi_bulk_queue_transmit (status=%d)",
++ __func__, success);
++
++ ret = -1;
++ goto unlock;
++ }
++ }
++ ret = 0;
++
++unlock:
++ vchi_service_release(instance->vchi_handle[0]);
++ mutex_unlock(&instance->vchi_mutex);
++ LOG_DBG(" .. OUT\n");
++ return ret;
++}
++
++/**
++ * Returns all buffers from arm->vc
++ */
++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++ LOG_DBG(" .. IN\n");
++ LOG_DBG(" .. OUT\n");
++ return;
++}
++
++/**
++ * Forces VC to flush(drop) its filled playback buffers and
++ * return them the us. (VC->ARM)
++ */
++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++ LOG_DBG(" .. IN\n");
++ LOG_DBG(" .. OUT\n");
++}
++
++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++ uint32_t count = atomic_read(&alsa_stream->retrieved);
++ atomic_sub(count, &alsa_stream->retrieved);
++ return count;
++}
++
++module_param(force_bulk, bool, 0444);
++MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio");
+diff -urN linux-3.10/sound/arm/Kconfig linux-rpi-3.10.y/sound/arm/Kconfig
+--- linux-3.10/sound/arm/Kconfig 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/Kconfig 2013-07-06 15:25:50.000000000 +0100
+@@ -39,5 +39,12 @@
+ Say Y or M if you want to support any AC97 codec attached to
+ the PXA2xx AC97 interface.
+
++config SND_BCM2835
++ tristate "BCM2835 ALSA driver"
++ depends on ARCH_BCM2708 && BCM2708_VCHIQ && SND
++ select SND_PCM
++ help
++ Say Y or M if you want to support BCM2835 Alsa pcm card driver
++
+ endif # SND_ARM
+
+diff -urN linux-3.10/sound/arm/Makefile linux-rpi-3.10.y/sound/arm/Makefile
+--- linux-3.10/sound/arm/Makefile 2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/Makefile 2013-07-06 15:25:50.000000000 +0100
+@@ -14,3 +14,9 @@
+
+ obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o
+ snd-pxa2xx-ac97-objs := pxa2xx-ac97.o
++
++obj-$(CONFIG_SND_BCM2835) += snd-bcm2835.o
++snd-bcm2835-objs := bcm2835.o bcm2835-ctl.o bcm2835-pcm.o bcm2835-vchiq.o
++
++EXTRA_CFLAGS += -Idrivers/misc/vc04_services -Idrivers/misc/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000
++
+diff -urN linux-3.10/sound/arm/vc_vchi_audioserv_defs.h linux-rpi-3.10.y/sound/arm/vc_vchi_audioserv_defs.h
+--- linux-3.10/sound/arm/vc_vchi_audioserv_defs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/vc_vchi_audioserv_defs.h 2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,116 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation. All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#ifndef _VC_AUDIO_DEFS_H_
++#define _VC_AUDIO_DEFS_H_
++
++#define VC_AUDIOSERV_MIN_VER 1
++#define VC_AUDIOSERV_VER 2
++
++// FourCC code used for VCHI connection
++#define VC_AUDIO_SERVER_NAME MAKE_FOURCC("AUDS")
++
++// Maximum message length
++#define VC_AUDIO_MAX_MSG_LEN (sizeof( VC_AUDIO_MSG_T ))
++
++// List of screens that are currently supported
++// All message types supported for HOST->VC direction
++typedef enum {
++ VC_AUDIO_MSG_TYPE_RESULT, // Generic result
++ VC_AUDIO_MSG_TYPE_COMPLETE, // Generic result
++ VC_AUDIO_MSG_TYPE_CONFIG, // Configure audio
++ VC_AUDIO_MSG_TYPE_CONTROL, // Configure audio
++ VC_AUDIO_MSG_TYPE_OPEN, // Configure audio
++ VC_AUDIO_MSG_TYPE_CLOSE, // Configure audio
++ VC_AUDIO_MSG_TYPE_START, // Configure audio
++ VC_AUDIO_MSG_TYPE_STOP, // Configure audio
++ VC_AUDIO_MSG_TYPE_WRITE, // Configure audio
++ VC_AUDIO_MSG_TYPE_MAX
++} VC_AUDIO_MSG_TYPE;
++
++// configure the audio
++typedef struct {
++ uint32_t channels;
++ uint32_t samplerate;
++ uint32_t bps;
++
++} VC_AUDIO_CONFIG_T;
++
++typedef struct {
++ uint32_t volume;
++ uint32_t dest;
++
++} VC_AUDIO_CONTROL_T;
++
++// audio
++typedef struct {
++ uint32_t dummy;
++
++} VC_AUDIO_OPEN_T;
++
++// audio
++typedef struct {
++ uint32_t dummy;
++
++} VC_AUDIO_CLOSE_T;
++// audio
++typedef struct {
++ uint32_t dummy;
++
++} VC_AUDIO_START_T;
++// audio
++typedef struct {
++ uint32_t draining;
++
++} VC_AUDIO_STOP_T;
++
++// configure the write audio samples
++typedef struct {
++ uint32_t count; // in bytes
++ void *callback;
++ void *cookie;
++ uint16_t silence;
++ uint16_t max_packet;
++} VC_AUDIO_WRITE_T;
++
++// Generic result for a request (VC->HOST)
++typedef struct {
++ int32_t success; // Success value
++
++} VC_AUDIO_RESULT_T;
++
++// Generic result for a request (VC->HOST)
++typedef struct {
++ int32_t count; // Success value
++ void *callback;
++ void *cookie;
++} VC_AUDIO_COMPLETE_T;
++
++// Message header for all messages in HOST->VC direction
++typedef struct {
++ int32_t type; // Message type (VC_AUDIO_MSG_TYPE)
++ union {
++ VC_AUDIO_CONFIG_T config;
++ VC_AUDIO_CONTROL_T control;
++ VC_AUDIO_OPEN_T open;
++ VC_AUDIO_CLOSE_T close;
++ VC_AUDIO_START_T start;
++ VC_AUDIO_STOP_T stop;
++ VC_AUDIO_WRITE_T write;
++ VC_AUDIO_RESULT_T result;
++ VC_AUDIO_COMPLETE_T complete;
++ } u;
++} VC_AUDIO_MSG_T;
++
++#endif // _VC_AUDIO_DEFS_H_
generated by cgit v1.1 at 2024-12-26 01:09:20 +0000