summaryrefslogtreecommitdiff
path: root/target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch')
-rw-r--r--target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch449
1 files changed, 0 insertions, 449 deletions
diff --git a/target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch b/target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch
deleted file mode 100644
index 44e380b..0000000
--- a/target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch
+++ /dev/null
@@ -1,449 +0,0 @@
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-bcm2708.c
-@@ -0,0 +1,408 @@
-+/*
-+ * Driver for Broadcom BCM2708 BSC Controllers
-+ *
-+ * Copyright (C) 2012 Chris Boot & Frank Buss
-+ *
-+ * This driver is inspired by:
-+ * i2c-ocores.c, by Peter Korsgaard <jacmet@sunsite.dk>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+
-+/* BSC register offsets */
-+#define BSC_C 0x00
-+#define BSC_S 0x04
-+#define BSC_DLEN 0x08
-+#define BSC_A 0x0c
-+#define BSC_FIFO 0x10
-+#define BSC_DIV 0x14
-+#define BSC_DEL 0x18
-+#define BSC_CLKT 0x1c
-+
-+/* Bitfields in BSC_C */
-+#define BSC_C_I2CEN 0x00008000
-+#define BSC_C_INTR 0x00000400
-+#define BSC_C_INTT 0x00000200
-+#define BSC_C_INTD 0x00000100
-+#define BSC_C_ST 0x00000080
-+#define BSC_C_CLEAR_1 0x00000020
-+#define BSC_C_CLEAR_2 0x00000010
-+#define BSC_C_READ 0x00000001
-+
-+/* Bitfields in BSC_S */
-+#define BSC_S_CLKT 0x00000200
-+#define BSC_S_ERR 0x00000100
-+#define BSC_S_RXF 0x00000080
-+#define BSC_S_TXE 0x00000040
-+#define BSC_S_RXD 0x00000020
-+#define BSC_S_TXD 0x00000010
-+#define BSC_S_RXR 0x00000008
-+#define BSC_S_TXW 0x00000004
-+#define BSC_S_DONE 0x00000002
-+#define BSC_S_TA 0x00000001
-+
-+#define I2C_TIMEOUT_MS 150
-+
-+#define DRV_NAME "bcm2708_i2c"
-+
-+static unsigned int baudrate = CONFIG_I2C_BCM2708_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The I2C baudrate");
-+
-+
-+struct bcm2708_i2c {
-+ struct i2c_adapter adapter;
-+
-+ spinlock_t lock;
-+ void __iomem *base;
-+ int irq;
-+ struct clk *clk;
-+
-+ struct completion done;
-+
-+ struct i2c_msg *msg;
-+ int pos;
-+ int nmsgs;
-+ bool error;
-+};
-+
-+/*
-+ * This function sets the ALT mode on the I2C pins so that we can use them with
-+ * the BSC hardware.
-+ *
-+ * FIXME: This is a hack. Use pinmux / pinctrl.
-+ */
-+static void bcm2708_i2c_init_pinmode(int id)
-+{
-+#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
-+#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
-+
-+ int pin;
-+ u32 *gpio = ioremap(0x20200000, SZ_16K);
-+
-+ BUG_ON(id != 0 && id != 1);
-+ /* BSC0 is on GPIO 0 & 1, BSC1 is on GPIO 2 & 3 */
-+ for (pin = id*2+0; pin <= id*2+1; pin++) {
-+printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
-+ INP_GPIO(pin); /* set mode to GPIO input first */
-+ SET_GPIO_ALT(pin, 0); /* set mode to ALT 0 */
-+ }
-+
-+ iounmap(gpio);
-+
-+#undef INP_GPIO
-+#undef SET_GPIO_ALT
-+}
-+
-+static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg)
-+{
-+ return readl(bi->base + reg);
-+}
-+
-+static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val)
-+{
-+ writel(val, bi->base + reg);
-+}
-+
-+static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi)
-+{
-+ bcm2708_wr(bi, BSC_C, 0);
-+ bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE);
-+}
-+
-+static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi)
-+{
-+ while ((bcm2708_rd(bi, BSC_S) & BSC_S_RXD) && (bi->pos < bi->msg->len))
-+ bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO);
-+}
-+
-+static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
-+{
-+ while ((bcm2708_rd(bi, BSC_S) & BSC_S_TXD) && (bi->pos < bi->msg->len))
-+ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
-+}
-+
-+static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
-+{
-+ unsigned long bus_hz;
-+ u32 cdiv;
-+ u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
-+
-+ bus_hz = clk_get_rate(bi->clk);
-+ cdiv = bus_hz / baudrate;
-+
-+ if (bi->msg->flags & I2C_M_RD)
-+ c |= BSC_C_INTR | BSC_C_READ;
-+ else
-+ c |= BSC_C_INTT;
-+
-+ bcm2708_wr(bi, BSC_DIV, cdiv);
-+ bcm2708_wr(bi, BSC_A, bi->msg->addr);
-+ bcm2708_wr(bi, BSC_DLEN, bi->msg->len);
-+ bcm2708_wr(bi, BSC_C, c);
-+}
-+
-+static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
-+{
-+ struct bcm2708_i2c *bi = dev_id;
-+ bool handled = true;
-+ u32 s;
-+
-+ spin_lock(&bi->lock);
-+
-+ /* we may see camera interrupts on the "other" I2C channel
-+ Just return if we've not sent anything */
-+ if (!bi->nmsgs || !bi->msg )
-+ goto early_exit;
-+
-+ s = bcm2708_rd(bi, BSC_S);
-+
-+ if (s & (BSC_S_CLKT | BSC_S_ERR)) {
-+ bcm2708_bsc_reset(bi);
-+ bi->error = true;
-+
-+ /* wake up our bh */
-+ complete(&bi->done);
-+ } else if (s & BSC_S_DONE) {
-+ bi->nmsgs--;
-+
-+ if (bi->msg->flags & I2C_M_RD)
-+ bcm2708_bsc_fifo_drain(bi);
-+
-+ bcm2708_bsc_reset(bi);
-+
-+ if (bi->nmsgs) {
-+ /* advance to next message */
-+ bi->msg++;
-+ bi->pos = 0;
-+ bcm2708_bsc_setup(bi);
-+ } else {
-+ /* wake up our bh */
-+ complete(&bi->done);
-+ }
-+ } else if (s & BSC_S_TXW) {
-+ bcm2708_bsc_fifo_fill(bi);
-+ } else if (s & BSC_S_RXR) {
-+ bcm2708_bsc_fifo_drain(bi);
-+ } else {
-+ handled = false;
-+ }
-+
-+early_exit:
-+ spin_unlock(&bi->lock);
-+
-+ return handled ? IRQ_HANDLED : IRQ_NONE;
-+}
-+
-+static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap,
-+ struct i2c_msg *msgs, int num)
-+{
-+ struct bcm2708_i2c *bi = adap->algo_data;
-+ unsigned long flags;
-+ int ret;
-+
-+ spin_lock_irqsave(&bi->lock, flags);
-+
-+ INIT_COMPLETION(bi->done);
-+ bi->msg = msgs;
-+ bi->pos = 0;
-+ bi->nmsgs = num;
-+ bi->error = false;
-+
-+ spin_unlock_irqrestore(&bi->lock, flags);
-+
-+ bcm2708_bsc_setup(bi);
-+
-+ ret = wait_for_completion_timeout(&bi->done,
-+ msecs_to_jiffies(I2C_TIMEOUT_MS));
-+ if (ret == 0) {
-+ dev_err(&adap->dev, "transfer timed out\n");
-+ spin_lock_irqsave(&bi->lock, flags);
-+ bcm2708_bsc_reset(bi);
-+ spin_unlock_irqrestore(&bi->lock, flags);
-+ return -ETIMEDOUT;
-+ }
-+
-+ return bi->error ? -EIO : num;
-+}
-+
-+static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap)
-+{
-+ return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm bcm2708_i2c_algorithm = {
-+ .master_xfer = bcm2708_i2c_master_xfer,
-+ .functionality = bcm2708_i2c_functionality,
-+};
-+
-+static int bcm2708_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ int irq, err = -ENOMEM;
-+ struct clk *clk;
-+ struct bcm2708_i2c *bi;
-+ struct i2c_adapter *adap;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "could not get IO memory\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "could not get IRQ\n");
-+ return irq;
-+ }
-+
-+ clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk));
-+ return PTR_ERR(clk);
-+ }
-+
-+ bcm2708_i2c_init_pinmode(pdev->id);
-+
-+ bi = kzalloc(sizeof(*bi), GFP_KERNEL);
-+ if (!bi)
-+ goto out_clk_put;
-+
-+ platform_set_drvdata(pdev, bi);
-+
-+ adap = &bi->adapter;
-+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC;
-+ adap->algo = &bcm2708_i2c_algorithm;
-+ adap->algo_data = bi;
-+ adap->dev.parent = &pdev->dev;
-+ adap->nr = pdev->id;
-+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
-+
-+ switch (pdev->id) {
-+ case 0:
-+ adap->class = I2C_CLASS_HWMON;
-+ break;
-+ case 1:
-+ adap->class = I2C_CLASS_DDC;
-+ break;
-+ default:
-+ dev_err(&pdev->dev, "can only bind to BSC 0 or 1\n");
-+ err = -ENXIO;
-+ goto out_free_bi;
-+ }
-+
-+ spin_lock_init(&bi->lock);
-+ init_completion(&bi->done);
-+
-+ bi->base = ioremap(regs->start, resource_size(regs));
-+ if (!bi->base) {
-+ dev_err(&pdev->dev, "could not remap memory\n");
-+ goto out_free_bi;
-+ }
-+
-+ bi->irq = irq;
-+ bi->clk = clk;
-+
-+ err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED,
-+ dev_name(&pdev->dev), bi);
-+ if (err) {
-+ dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
-+ goto out_iounmap;
-+ }
-+
-+ bcm2708_bsc_reset(bi);
-+
-+ err = i2c_add_numbered_adapter(adap);
-+ if (err < 0) {
-+ dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err);
-+ goto out_free_irq;
-+ }
-+
-+ dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %dk)\n",
-+ pdev->id, (unsigned long)regs->start, irq, baudrate/1000);
-+
-+ return 0;
-+
-+out_free_irq:
-+ free_irq(bi->irq, bi);
-+out_iounmap:
-+ iounmap(bi->base);
-+out_free_bi:
-+ kfree(bi);
-+out_clk_put:
-+ clk_put(clk);
-+ return err;
-+}
-+
-+static int bcm2708_i2c_remove(struct platform_device *pdev)
-+{
-+ struct bcm2708_i2c *bi = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ i2c_del_adapter(&bi->adapter);
-+ free_irq(bi->irq, bi);
-+ iounmap(bi->base);
-+ clk_disable(bi->clk);
-+ clk_put(bi->clk);
-+ kfree(bi);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver bcm2708_i2c_driver = {
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = bcm2708_i2c_probe,
-+ .remove = bcm2708_i2c_remove,
-+};
-+
-+// module_platform_driver(bcm2708_i2c_driver);
-+
-+
-+static int __init bcm2708_i2c_init(void)
-+{
-+ return platform_driver_register(&bcm2708_i2c_driver);
-+}
-+
-+static void __exit bcm2708_i2c_exit(void)
-+{
-+ platform_driver_unregister(&bcm2708_i2c_driver);
-+}
-+
-+module_init(bcm2708_i2c_init);
-+module_exit(bcm2708_i2c_exit);
-+
-+
-+
-+MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708");
-+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" DRV_NAME);
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -345,6 +345,25 @@ config I2C_BCM2835
- This support is also available as a module. If so, the module
- will be called i2c-bcm2835.
-
-+config I2C_BCM2708
-+ tristate "BCM2708 BSC"
-+ depends on MACH_BCM2708
-+ help
-+ Enabling this option will add BSC (Broadcom Serial Controller)
-+ support for the BCM2708. BSC is a Broadcom proprietary bus compatible
-+ with I2C/TWI/SMBus.
-+
-+config I2C_BCM2708_BAUDRATE
-+ prompt "BCM2708 I2C baudrate"
-+ depends on I2C_BCM2708
-+ int
-+ default 100000
-+ help
-+ Set the I2C baudrate. This will alter the default value. A
-+ different baudrate can be set by using a module parameter as well. If
-+ no parameter is provided when loading, this is the value that will be
-+ used.
-+
- config I2C_BLACKFIN_TWI
- tristate "Blackfin TWI I2C support"
- depends on BLACKFIN
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powerm
- obj-$(CONFIG_I2C_AT91) += i2c-at91.o
- obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
- obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
-+obj-$(CONFIG_I2C_BCM2708) += i2c-bcm2708.o
- obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
- obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
- obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
generated by cgit v1.1 at 2024-11-27 21:51:49 +0000