1 files changed, 0 insertions, 106 deletions
diff --git a/target/linux/brcm2708/patches-3.18/0070-Adding-w1-gpio-device-tree-overlays.patch b/target/linux/brcm2708/patches-3.18/0070-Adding-w1-gpio-device-tree-overlays.patch
deleted file mode 100644
index bf1a634..0000000
--- a/target/linux/brcm2708/patches-3.18/0070-Adding-w1-gpio-device-tree-overlays.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 2fea9b14e39bd6c64e362ba7d170b67d09206987 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 15 Jan 2015 10:39:06 +0000
-Subject: [PATCH 070/114] Adding w1-gpio device tree overlays
-
-N.B. Requires firmware supporting multi-target overrides
-
-w1-gpio-overlay:
-  Use if a pullup pin is not required.
-  Parameters:
-    gpiopin=<i/o pin>     // default 4
-
-w1-gpio-pullup-overlay:
-  Use if a pullup pin is required.
-  Parameters:
-    gpiopin=<i/o pin>     // default 4
-    pullup=<pullup pin>   // default 5
----
- arch/arm/boot/dts/w1-gpio-overlay.dts        | 37 ++++++++++++++++++++++++++
- arch/arm/boot/dts/w1-gpio-pullup-overlay.dts | 39 ++++++++++++++++++++++++++++
- 2 files changed, 76 insertions(+)
- create mode 100644 arch/arm/boot/dts/w1-gpio-overlay.dts
- create mode 100644 arch/arm/boot/dts/w1-gpio-pullup-overlay.dts
-
---- /dev/null
-+++ b/arch/arm/boot/dts/w1-gpio-overlay.dts
-@@ -0,0 +1,37 @@
-+// Definitions for lirc-rpi module
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target-path = "/";
-+		__overlay__ {
-+
-+			w1: onewire@0 {
-+				compatible = "w1-gpio";
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&w1_pins>;
-+				gpios = <&gpio 4 0>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			w1_pins: w1_pins {
-+				brcm,pins = <4>;
-+				brcm,function = <0>; // in (initially)
-+				brcm,pull = <0>; // off
-+			};
-+		};
-+	};
-+
-+	__overrides__ {
-+		gpiopin =       <&w1>,"gpios:4",
-+				<&w1_pins>,"brcm,pins:0";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/w1-gpio-pullup-overlay.dts
-@@ -0,0 +1,39 @@
-+// Definitions for lirc-rpi module
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target-path = "/";
-+		__overlay__ {
-+
-+			w1: onewire@0 {
-+				compatible = "w1-gpio";
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&w1_pins>;
-+				gpios = <&gpio 4 0>, <&gpio 5 1>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			w1_pins: w1_pins {
-+				brcm,pins = <4 5>;
-+				brcm,function = <0 1>; // in out
-+				brcm,pull = <0 0>; // off off
-+			};
-+		};
-+	};
-+
-+	__overrides__ {
-+		gpiopin =       <&w1>,"gpios:4",
-+				<&w1_pins>,"brcm,pins:0";
-+		pullup =        <&w1>,"gpios:16",
-+				<&w1_pins>,"brcm,pins:4";
-+	};
-+};