summaryrefslogtreecommitdiff
path: root/target/linux/brcm2708/patches-3.18/0110-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-3.18/0110-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch')
-rw-r--r--target/linux/brcm2708/patches-3.18/0110-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch244
1 files changed, 0 insertions, 244 deletions
diff --git a/target/linux/brcm2708/patches-3.18/0110-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch b/target/linux/brcm2708/patches-3.18/0110-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch
deleted file mode 100644
index e522125..0000000
--- a/target/linux/brcm2708/patches-3.18/0110-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch
+++ /dev/null
@@ -1,244 +0,0 @@
-From 5f1c4a04606c2fb2d0203bdbe364a6054b3bb0b7 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 6 Feb 2015 13:50:57 +0000
-Subject: [PATCH 110/114] BCM270x_DT: Add pwr_led, and the required "input"
- trigger
-
-The "input" trigger makes the associated GPIO an input. This is to support
-the Raspberry Pi PWR LED, which is driven by external hardware in normal use.
-
-N.B. pwr_led is not available on Model A or B boards.
----
- arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 18 ++++++++-
- arch/arm/boot/dts/bcm2708-rpi-b.dts | 8 +++-
- arch/arm/boot/dts/bcm2708.dtsi | 5 ---
- arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 18 ++++++++-
- arch/arm/boot/dts/bcm2709.dtsi | 5 ---
- arch/arm/configs/bcm2709_defconfig | 1 +
- arch/arm/configs/bcmrpi_defconfig | 1 +
- drivers/leds/trigger/Kconfig | 7 ++++
- drivers/leds/trigger/Makefile | 1 +
- drivers/leds/trigger/ledtrig-input.c | 65 ++++++++++++++++++++++++++++++++
- 10 files changed, 113 insertions(+), 16 deletions(-)
- create mode 100644 drivers/leds/trigger/ledtrig-input.c
-
---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-@@ -83,8 +83,18 @@
- pinctrl-0 = <&i2s_pins>;
- };
-
--&act_led {
-- gpios = <&gpio 47 0>;
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 47 0>;
-+ };
-+
-+ pwr_led: pwr {
-+ label = "led1";
-+ linux,default-trigger = "input";
-+ gpios = <&gpio 35 0>;
-+ };
- };
-
- / {
-@@ -99,5 +109,9 @@
- act_led_gpio = <&act_led>,"gpios:4";
- act_led_activelow = <&act_led>,"gpios:8";
- act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+ pwr_led_gpio = <&pwr_led>,"gpios:4";
-+ pwr_led_activelow = <&pwr_led>,"gpios:8";
-+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
- };
- };
---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
-@@ -83,8 +83,12 @@
- pinctrl-0 = <&i2s_pins>;
- };
-
--&act_led {
-- gpios = <&gpio 16 1>;
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 16 1>;
-+ };
- };
-
- / {
---- a/arch/arm/boot/dts/bcm2708.dtsi
-+++ b/arch/arm/boot/dts/bcm2708.dtsi
-@@ -79,11 +79,6 @@
-
- leds: leds {
- compatible = "gpio-leds";
--
-- act_led: act {
-- label = "led0";
-- linux,default-trigger = "mmc0";
-- };
- };
- };
-
---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-@@ -83,8 +83,18 @@
- pinctrl-0 = <&i2s_pins>;
- };
-
--&act_led {
-- gpios = <&gpio 47 0>;
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 47 0>;
-+ };
-+
-+ pwr_led: pwr {
-+ label = "led1";
-+ linux,default-trigger = "input";
-+ gpios = <&gpio 35 0>;
-+ };
- };
-
- / {
-@@ -99,5 +109,9 @@
- act_led_gpio = <&act_led>,"gpios:4";
- act_led_activelow = <&act_led>,"gpios:8";
- act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+ pwr_led_gpio = <&pwr_led>,"gpios:4";
-+ pwr_led_activelow = <&pwr_led>,"gpios:8";
-+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
- };
- };
---- a/arch/arm/boot/dts/bcm2709.dtsi
-+++ b/arch/arm/boot/dts/bcm2709.dtsi
-@@ -79,11 +79,6 @@
-
- leds: leds {
- compatible = "gpio-leds";
--
-- act_led: act {
-- label = "led0";
-- linux,default-trigger = "mmc0";
-- };
- };
- };
-
---- a/arch/arm/configs/bcm2709_defconfig
-+++ b/arch/arm/configs/bcm2709_defconfig
-@@ -959,6 +959,7 @@ CONFIG_LEDS_TRIGGER_GPIO=y
- CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
- CONFIG_LEDS_TRIGGER_TRANSIENT=m
- CONFIG_LEDS_TRIGGER_CAMERA=m
-+CONFIG_LEDS_TRIGGER_INPUT=y
- CONFIG_RTC_CLASS=y
- # CONFIG_RTC_HCTOSYS is not set
- CONFIG_RTC_DRV_DS1307=m
---- a/arch/arm/configs/bcmrpi_defconfig
-+++ b/arch/arm/configs/bcmrpi_defconfig
-@@ -952,6 +952,7 @@ CONFIG_LEDS_TRIGGER_GPIO=y
- CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
- CONFIG_LEDS_TRIGGER_TRANSIENT=m
- CONFIG_LEDS_TRIGGER_CAMERA=m
-+CONFIG_LEDS_TRIGGER_INPUT=y
- CONFIG_RTC_CLASS=y
- # CONFIG_RTC_HCTOSYS is not set
- CONFIG_RTC_DRV_DS1307=m
---- a/drivers/leds/trigger/Kconfig
-+++ b/drivers/leds/trigger/Kconfig
-@@ -126,4 +126,11 @@ config LEDS_TRIGGER_USBDEV
- This allows LEDs to be controlled by the presence/activity of
- an USB device. If unsure, say N.
-
-+config LEDS_TRIGGER_INPUT
-+ tristate "LED Input Trigger"
-+ depends on LEDS_TRIGGERS
-+ help
-+ This allows the GPIOs assigned to be LEDs to be initialised to inputs.
-+ If unsure, say Y.
-+
- endif # LEDS_TRIGGERS
---- a/drivers/leds/trigger/Makefile
-+++ b/drivers/leds/trigger/Makefile
-@@ -8,3 +8,4 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtr
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
- obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
- obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
-+obj-$(CONFIG_LEDS_TRIGGER_INPUT) += ledtrig-input.o
---- /dev/null
-+++ b/drivers/leds/trigger/ledtrig-input.c
-@@ -0,0 +1,65 @@
-+/*
-+ * Set LED GPIO to Input "Trigger"
-+ *
-+ * Copyright 2015 Phil Elwell <phil@raspberrypi.org>
-+ *
-+ * Based on Nick Forbes's ledtrig-default-on.c.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/leds.h>
-+#include <linux/gpio.h>
-+#include "../leds.h"
-+
-+/* This is a hack to get at the private 'gpio' member */
-+
-+struct gpio_led_data {
-+ struct led_classdev cdev;
-+ unsigned gpio;
-+};
-+
-+static void input_trig_activate(struct led_classdev *led_cdev)
-+{
-+ struct gpio_led_data *led_dat =
-+ container_of(led_cdev, struct gpio_led_data, cdev);
-+ if (gpio_is_valid(led_dat->gpio))
-+ gpio_direction_input(led_dat->gpio);
-+}
-+
-+static void input_trig_deactivate(struct led_classdev *led_cdev)
-+{
-+ struct gpio_led_data *led_dat =
-+ container_of(led_cdev, struct gpio_led_data, cdev);
-+ if (gpio_is_valid(led_dat->gpio))
-+ gpio_direction_output(led_dat->gpio, 0);
-+}
-+
-+static struct led_trigger input_led_trigger = {
-+ .name = "input",
-+ .activate = input_trig_activate,
-+ .deactivate = input_trig_deactivate,
-+};
-+
-+static int __init input_trig_init(void)
-+{
-+ return led_trigger_register(&input_led_trigger);
-+}
-+
-+static void __exit input_trig_exit(void)
-+{
-+ led_trigger_unregister(&input_led_trigger);
-+}
-+
-+module_init(input_trig_init);
-+module_exit(input_trig_exit);
-+
-+MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.org>");
-+MODULE_DESCRIPTION("Set LED GPIO to Input \"trigger\"");
-+MODULE_LICENSE("GPL");
generated by cgit v1.1 at 2025-01-08 00:40:12 +0000