summaryrefslogtreecommitdiff
path: root/target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch')
-rw-r--r--target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch87
1 files changed, 87 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch b/target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch
new file mode 100644
index 0000000..2c834c3
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.1/0036-BCM2708-Add-I2S-support-to-board-file.patch
@@ -0,0 +1,87 @@
+From 1ae47f91380b552b3bb3adb28f3283be31786064 Mon Sep 17 00:00:00 2001
+From: Florian Meier <florian.meier@koalo.de>
+Date: Fri, 22 Nov 2013 19:04:54 +0100
+Subject: [PATCH 036/121] BCM2708: Add I2S support to board file
+
+Adds the required initializations for I2S
+to the board file of mach-bcm2708.
+
+Signed-off-by: Florian Meier <florian.meier@koalo.de>
+
+bcm2708-i2s: Enable MMAP support via a DT property and overlay
+
+The i2s driver used to claim to support MMAP, but that feature was disabled
+when some problems were found. Add the ability to enable this feature
+through Device Tree, using the i2s-mmap overlay.
+
+See: #1004
+---
+ arch/arm/mach-bcm2708/bcm2708.c | 26 ++++++++++++++++++++++++++
+ sound/soc/bcm/bcm2708-i2s.c | 7 ++++++-
+ 2 files changed, 32 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/mach-bcm2708/bcm2708.c
++++ b/arch/arm/mach-bcm2708/bcm2708.c
+@@ -616,6 +616,28 @@ static struct platform_device bcm2835_th
+ .name = "bcm2835_thermal",
+ };
+
++#if defined(CONFIG_SND_BCM2708_SOC_I2S) || defined(CONFIG_SND_BCM2708_SOC_I2S_MODULE)
++static struct resource bcm2708_i2s_resources[] = {
++ {
++ .start = I2S_BASE,
++ .end = I2S_BASE + 0x20,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = PCM_CLOCK_BASE,
++ .end = PCM_CLOCK_BASE + 0x02,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device bcm2708_i2s_device = {
++ .name = "bcm2708-i2s",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(bcm2708_i2s_resources),
++ .resource = bcm2708_i2s_resources,
++};
++#endif
++
+ int __init bcm_register_device(struct platform_device *pdev)
+ {
+ int ret;
+@@ -780,6 +802,10 @@ void __init bcm2708_init(void)
+
+ bcm_register_device_dt(&bcm2835_thermal_device);
+
++#if defined(CONFIG_SND_BCM2708_SOC_I2S) || defined(CONFIG_SND_BCM2708_SOC_I2S_MODULE)
++ bcm_register_device_dt(&bcm2708_i2s_device);
++#endif
++
+ if (!use_dt) {
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+--- a/sound/soc/bcm/bcm2708-i2s.c
++++ b/sound/soc/bcm/bcm2708-i2s.c
+@@ -874,7 +874,7 @@ static const struct snd_soc_component_dr
+ .name = "bcm2708-i2s-comp",
+ };
+
+-static const struct snd_pcm_hardware bcm2708_pcm_hardware = {
++static struct snd_pcm_hardware bcm2708_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_JOINT_DUPLEX,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+@@ -902,6 +902,11 @@ static int bcm2708_i2s_probe(struct plat
+ struct regmap *regmap[2];
+ struct resource *mem[2];
+
++ if (of_property_read_bool(pdev->dev.of_node, "brcm,enable-mmap"))
++ bcm2708_pcm_hardware.info |=
++ SNDRV_PCM_INFO_MMAP |
++ SNDRV_PCM_INFO_MMAP_VALID;
++
+ /* Request both ioareas */
+ for (i = 0; i <= 1; i++) {
+ void __iomem *base;