diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch | 124 |
1 files changed, 124 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch b/target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch new file mode 100644 index 0000000..392ce70 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch @@ -0,0 +1,124 @@ +From 0e690096e05c3b4e806381ff38124dbdae3ba877 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org> +Date: Fri, 7 Oct 2016 16:50:59 +0200 +Subject: [PATCH] watchdog: bcm2835: Support setting reboot partition +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The Raspberry Pi firmware looks at the RSTS register to know which +partition to boot from. The reboot syscall command +LINUX_REBOOT_CMD_RESTART2 supports passing in a string argument. + +Add support for passing in a partition number 0..63 to boot from. +Partition 63 is a special partiton indicating halt. +If the partition doesn't exist, the firmware falls back to partition 0. + +Signed-off-by: Noralf Trønnes <noralf@tronnes.org> +--- + drivers/watchdog/bcm2835_wdt.c | 61 +++++++++++++++++++++++++----------------- + 1 file changed, 36 insertions(+), 25 deletions(-) + +--- a/drivers/watchdog/bcm2835_wdt.c ++++ b/drivers/watchdog/bcm2835_wdt.c +@@ -35,13 +35,7 @@ + #define PM_RSTC_WRCFG_SET 0x00000030 + #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 + #define PM_RSTC_RESET 0x00000102 +- +-/* +- * The Raspberry Pi firmware uses the RSTS register to know which partiton +- * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. +- * Partiton 63 is a special partition used by the firmware to indicate halt. +- */ +-#define PM_RSTS_RASPBERRYPI_HALT 0x555 ++#define PM_RSTS_PARTITION_CLR 0xfffffaaa + + #define SECS_TO_WDOG_TICKS(x) ((x) << 16) + #define WDOG_TICKS_TO_SECS(x) ((x) >> 16) +@@ -111,15 +105,28 @@ static struct watchdog_device bcm2835_wd + .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), + }; + +-static int +-bcm2835_restart(struct notifier_block *this, unsigned long mode, void *cmd) ++/* ++ * The Raspberry Pi firmware uses the RSTS register to know which partiton ++ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. ++ * Partiton 63 is a special partition used by the firmware to indicate halt. ++ */ ++ ++static void bcm2835_restart(struct bcm2835_wdt *wdt, u8 partition) + { +- struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt, +- restart_handler); +- u32 val; ++ u32 val, rsts; ++ ++ rsts = (partition & BIT(0)) | ((partition & BIT(1)) << 1) | ++ ((partition & BIT(2)) << 2) | ((partition & BIT(3)) << 3) | ++ ((partition & BIT(4)) << 4) | ((partition & BIT(5)) << 5); ++ ++ val = readl_relaxed(wdt->base + PM_RSTS); ++ val &= PM_RSTS_PARTITION_CLR; ++ val |= PM_PASSWORD | rsts; ++ writel_relaxed(val, wdt->base + PM_RSTS); + + /* use a timeout of 10 ticks (~150us) */ + writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG); ++ + val = readl_relaxed(wdt->base + PM_RSTC); + val &= PM_RSTC_WRCFG_CLR; + val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; +@@ -127,6 +134,20 @@ bcm2835_restart(struct notifier_block *t + + /* No sleeping, possibly atomic. */ + mdelay(1); ++} ++ ++static int bcm2835_restart_notifier_call(struct notifier_block *this, ++ unsigned long mode, void *cmd) ++{ ++ struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt, ++ restart_handler); ++ unsigned long long val; ++ u8 partition = 0; ++ ++ if (cmd && !kstrtoull(cmd, 0, &val) && val <= 63) ++ partition = val; ++ ++ bcm2835_restart(wdt, partition); + + return 0; + } +@@ -142,19 +163,9 @@ static void bcm2835_power_off(void) + of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt"); + struct platform_device *pdev = of_find_device_by_node(np); + struct bcm2835_wdt *wdt = platform_get_drvdata(pdev); +- u32 val; +- +- /* +- * We set the watchdog hard reset bit here to distinguish this reset +- * from the normal (full) reset. bootcode.bin will not reboot after a +- * hard reset. +- */ +- val = readl_relaxed(wdt->base + PM_RSTS); +- val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT; +- writel_relaxed(val, wdt->base + PM_RSTS); + +- /* Continue with normal reset mechanism */ +- bcm2835_restart(&wdt->restart_handler, REBOOT_HARD, NULL); ++ /* Partition 63 tells the firmware that this is a halt */ ++ bcm2835_restart(wdt, 63); + } + + static int bcm2835_wdt_probe(struct platform_device *pdev) +@@ -188,7 +199,7 @@ static int bcm2835_wdt_probe(struct plat + return err; + } + +- wdt->restart_handler.notifier_call = bcm2835_restart; ++ wdt->restart_handler.notifier_call = bcm2835_restart_notifier_call; + wdt->restart_handler.priority = 128; + register_restart_handler(&wdt->restart_handler); + if (pm_power_off == NULL) |