diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.9/950-0121-ARM64-Make-it-work-again-on-4.9-1790.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.9/950-0121-ARM64-Make-it-work-again-on-4.9-1790.patch | 410 |
1 files changed, 410 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.9/950-0121-ARM64-Make-it-work-again-on-4.9-1790.patch b/target/linux/brcm2708/patches-4.9/950-0121-ARM64-Make-it-work-again-on-4.9-1790.patch new file mode 100644 index 0000000..96b298d --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0121-ARM64-Make-it-work-again-on-4.9-1790.patch @@ -0,0 +1,410 @@ +From fe3c34c6196cfc708a515e44dd432da0e6cc0aba Mon Sep 17 00:00:00 2001 +From: Electron752 <mzoran@crowfest.net> +Date: Thu, 12 Jan 2017 07:07:08 -0800 +Subject: [PATCH] ARM64: Make it work again on 4.9 (#1790) + +* Invoke the dtc compiler with the same options used in arm mode. +* ARM64 now uses the bcm2835 platform just like ARM32. +* ARM64: Update bcmrpi3_defconfig + +Signed-off-by: Michael Zoran <mzoran@crowfest.net> +--- + arch/arm64/Kconfig.platforms | 22 ------ + arch/arm64/boot/dts/broadcom/Makefile | 10 ++- + arch/arm64/boot/dts/overlays | 1 + + arch/arm64/configs/bcmrpi3_defconfig | 126 ++++++++++------------------------ + 4 files changed, 48 insertions(+), 111 deletions(-) + create mode 120000 arch/arm64/boot/dts/overlays + +diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms +index 7d213c2c..101794f 100644 +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -1,27 +1,5 @@ + menu "Platform selection" + +-config MACH_BCM2709 +- bool +- +-config ARCH_BCM2709 +- bool "Broadcom BCM2709 family" +- select MACH_BCM2709 +- select HAVE_SMP +- select ARM_AMBA +- select COMMON_CLK +- select ARCH_HAS_CPUFREQ +- select GENERIC_CLOCKEVENTS +- select MULTI_IRQ_HANDLER +- select SPARSE_IRQ +- select MFD_SYSCON +- select VC4 +- select USE_OF +- select ARCH_REQUIRE_GPIOLIB +- select PINCTRL +- select PINCTRL_BCM2835 +- help +- This enables support for Broadcom BCM2709 boards. +- + config ARCH_SUNXI + bool "Allwinner sunxi 64-bit SoC Family" + select GENERIC_IRQ_CHIP +diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile +index 2152448..7aa03be 100644 +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -1,7 +1,15 @@ ++# Enable fixups to support overlays on BCM2835 platforms ++ ++ifeq ($(CONFIG_ARCH_BCM2835),y) ++DTC_FLAGS ?= -@ -H epapr ++endif ++ + dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb + dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb +-dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb ++dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb ++ ++dts-dirs += ../overlays + + always := $(dtb-y) + subdir-y := $(dts-dirs) +diff --git a/arch/arm64/boot/dts/overlays b/arch/arm64/boot/dts/overlays +new file mode 120000 +index 0000000..ded0864 +--- /dev/null ++++ b/arch/arm64/boot/dts/overlays +@@ -0,0 +1 @@ ++../../../arm/boot/dts/overlays +\ No newline at end of file +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +index 53da5c7..c7e891d 100644 +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -1,52 +1,9 @@ +-# CONFIG_ARM_PATCH_PHYS_VIRT is not set +-CONFIG_PHYS_OFFSET=0 + CONFIG_LOCALVERSION="-v8" + # CONFIG_LOCALVERSION_AUTO is not set +-CONFIG_64BIT=y + CONFIG_SYSVIPC=y + CONFIG_POSIX_MQUEUE=y + CONFIG_NO_HZ=y + CONFIG_HIGH_RES_TIMERS=y +- +-# +-# ARM errata workarounds via the alternatives framework +-# +-CONFIG_ARM64_ERRATUM_826319=n +-CONFIG_ARM64_ERRATUM_827319=n +-CONFIG_ARM64_ERRATUM_824069=n +-CONFIG_ARM64_ERRATUM_819472=n +-CONFIG_ARM64_ERRATUM_832075=n +-CONFIG_ARM64_ERRATUM_845719=n +-CONFIG_ARM64_ERRATUM_843419=n +-CONFIG_CAVIUM_ERRATUM_22375=n +-CONFIG_CAVIUM_ERRATUM_23154=n +-CONFIG_CAVIUM_ERRATUM_27456=n +-CONFIG_ARM64_4K_PAGES=y +-CONFIG_ARM64_VA_BITS_39=y +-CONFIG_ARM64_VA_BITS=39 +-CONFIG_SCHED_MC=y +-CONFIG_NR_CPUS=4 +-CONFIG_HOTPLUG_CPU=y +-CONFIG_ARMV8_DEPRECATED=y +-CONFIG_SWP_EMULATION=y +-CONFIG_CP15_BARRIER_EMULATION=y +-CONFIG_SETEND_EMULATION=y +- +-# +-# ARMv8.1 architectural features +-# +-CONFIG_ARM64_HW_AFDBM=y +-CONFIG_ARM64_PAN=y +-CONFIG_ARM64_LSE_ATOMICS=y +-CONFIG_ARM64_VHE=y +- +-# +-# ARMv8.2 architectural features +-# +-CONFIG_ARM64_UAO=y +-CONFIG_ARM64_MODULE_CMODEL_LARGE=n +-CONFIG_RANDOMIZE_BASE=n +- + CONFIG_BSD_PROCESS_ACCT=y + CONFIG_BSD_PROCESS_ACCT_V3=y + CONFIG_TASKSTATS=y +@@ -55,7 +12,6 @@ CONFIG_TASK_XACCT=y + CONFIG_TASK_IO_ACCOUNTING=y + CONFIG_IKCONFIG=m + CONFIG_IKCONFIG_PROC=y +-CONFIG_NMI_LOG_BUF_SHIFT=12 + CONFIG_MEMCG=y + CONFIG_BLK_CGROUP=y + CONFIG_CGROUP_FREEZER=y +@@ -69,54 +25,49 @@ CONFIG_BLK_DEV_INITRD=y + CONFIG_EMBEDDED=y + # CONFIG_COMPAT_BRK is not set + CONFIG_PROFILING=y +-CONFIG_OPROFILE=m + CONFIG_KPROBES=y + CONFIG_JUMP_LABEL=y + CONFIG_MODULES=y + CONFIG_MODULE_UNLOAD=y + CONFIG_MODVERSIONS=y + CONFIG_MODULE_SRCVERSION_ALL=y +-CONFIG_TRIM_UNUSED_KSYMS=y + CONFIG_BLK_DEV_THROTTLING=y + CONFIG_PARTITION_ADVANCED=y + CONFIG_MAC_PARTITION=y + CONFIG_CFQ_GROUP_IOSCHED=y +-CONFIG_ARCH_BCM2709=y +-# CONFIG_CACHE_L2X0 is not set +-CONFIG_SMP=y +-CONFIG_HAVE_ARM_ARCH_TIMER=y +-CONFIG_VMSPLIT_2G=y +-CONFIG_PREEMPT_VOLUNTARY=y +-CONFIG_AEABI=y +-CONFIG_OABI_COMPAT=y +-# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_ARCH_BCM2835=y ++# CONFIG_CAVIUM_ERRATUM_22375 is not set ++# CONFIG_CAVIUM_ERRATUM_23154 is not set ++# CONFIG_CAVIUM_ERRATUM_27456 is not set ++CONFIG_SCHED_MC=y ++CONFIG_NR_CPUS=4 ++CONFIG_PREEMPT=y ++CONFIG_HZ_1000=y + CONFIG_CLEANCACHE=y + CONFIG_FRONTSWAP=y + CONFIG_CMA=y + CONFIG_ZSMALLOC=m + CONFIG_PGTABLE_MAPPING=y +-CONFIG_UACCESS_WITH_MEMCPY=y + CONFIG_SECCOMP=y +-# CONFIG_ATAGS is not set +-CONFIG_ZBOOT_ROM_TEXT=0x0 +-CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_ARMV8_DEPRECATED=y ++CONFIG_SWP_EMULATION=y ++CONFIG_CP15_BARRIER_EMULATION=y ++CONFIG_SETEND_EMULATION=y + CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_BINFMT_MISC=y ++CONFIG_COMPAT=y ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_CPU_IDLE=y ++CONFIG_ARM_CPUIDLE=y + CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT=y + CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y + CONFIG_CPU_FREQ_GOV_PERFORMANCE=y + CONFIG_CPU_FREQ_GOV_USERSPACE=y + CONFIG_CPU_FREQ_GOV_ONDEMAND=y + CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +-CONFIG_VFP=y +-CONFIG_NEON=y +-CONFIG_KERNEL_MODE_NEON=y +-CONFIG_BINFMT_MISC=m +-CONFIG_COMPAT=y +-CONFIG_SYSVIPC_COMPAT=y +- +-# CONFIG_SUSPEND is not set +-CONFIG_PM=y + CONFIG_NET=y + CONFIG_PACKET=y + CONFIG_UNIX=y +@@ -437,6 +388,7 @@ CONFIG_BT_MRVL=m + CONFIG_BT_MRVL_SDIO=m + CONFIG_BT_ATH3K=m + CONFIG_BT_WILINK=m ++CONFIG_CFG80211=m + CONFIG_MAC80211=m + CONFIG_MAC80211_MESH=y + CONFIG_WIMAX=m +@@ -490,7 +442,6 @@ CONFIG_BONDING=m + CONFIG_DUMMY=m + CONFIG_IFB=m + CONFIG_MACVLAN=m +-CONFIG_IPVLAN=m + CONFIG_VXLAN=m + CONFIG_NETCONSOLE=m + CONFIG_TUN=m +@@ -579,8 +530,6 @@ CONFIG_RT2800USB_RT3573=y + CONFIG_RT2800USB_RT53XX=y + CONFIG_RT2800USB_RT55XX=y + CONFIG_RT2800USB_UNKNOWN=y +-CONFIG_RTL8187=m +-CONFIG_RTL8192CU=n + CONFIG_USB_ZD1201=m + CONFIG_ZD1211RW=m + CONFIG_MAC80211_HWSIM=m +@@ -606,7 +555,7 @@ CONFIG_JOYSTICK_RPISENSE=m + CONFIG_INPUT_TOUCHSCREEN=y + CONFIG_TOUCHSCREEN_ADS7846=m + CONFIG_TOUCHSCREEN_EGALAX=m +-CONFIG_TOUCHSCREEN_FT6236=m ++CONFIG_TOUCHSCREEN_EKTF2127=m + CONFIG_TOUCHSCREEN_RPI_FT5406=m + CONFIG_TOUCHSCREEN_USB_COMPOSITE=m + CONFIG_TOUCHSCREEN_STMPE=m +@@ -626,10 +575,8 @@ CONFIG_SERIO_RAW=m + CONFIG_GAMEPORT=m + CONFIG_GAMEPORT_NS558=m + CONFIG_GAMEPORT_L4=m +-CONFIG_BRCM_CHAR_DRIVERS=n +-CONFIG_BCM_VC_CMA=n +-CONFIG_BCM_VCIO=n +-CONFIG_BCM_VC_SM=n ++# CONFIG_BCM2835_DEVGPIOMEM is not set ++# CONFIG_BCM2835_SMI_DEV is not set + # CONFIG_LEGACY_PTYS is not set + # CONFIG_DEVKMEM is not set + CONFIG_SERIAL_8250=y +@@ -638,6 +585,9 @@ CONFIG_SERIAL_8250_CONSOLE=y + # CONFIG_SERIAL_8250_DMA is not set + CONFIG_SERIAL_8250_NR_UARTS=1 + CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_BCM2835AUX=y + CONFIG_SERIAL_OF_PLATFORM=y + CONFIG_SERIAL_AMBA_PL011=y + CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +@@ -650,6 +600,7 @@ CONFIG_I2C=y + CONFIG_I2C_CHARDEV=m + CONFIG_I2C_MUX_PCA954x=m + CONFIG_I2C_BCM2708=m ++CONFIG_I2C_BCM2835=m + CONFIG_I2C_GPIO=m + CONFIG_SPI=y + CONFIG_SPI_BCM2835=m +@@ -681,13 +632,13 @@ CONFIG_W1_SLAVE_DS2780=m + CONFIG_W1_SLAVE_DS2781=m + CONFIG_W1_SLAVE_DS28E04=m + CONFIG_W1_SLAVE_BQ27000=m +-CONFIG_BATTERY_DS2760=m +-CONFIG_POWER_RESET=y + CONFIG_POWER_RESET_GPIO=y ++CONFIG_BATTERY_DS2760=m + CONFIG_HWMON=m + CONFIG_SENSORS_LM75=m + CONFIG_SENSORS_SHT21=m + CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_INA2XX=m + CONFIG_THERMAL=y + CONFIG_THERMAL_BCM2835=y + CONFIG_WATCHDOG=y +@@ -835,8 +786,6 @@ CONFIG_VIDEO_EM28XX_V4L2=m + CONFIG_VIDEO_EM28XX_ALSA=m + CONFIG_VIDEO_EM28XX_DVB=m + CONFIG_V4L_PLATFORM_DRIVERS=y +-CONFIG_VIDEO_BCM2835=n +-CONFIG_VIDEO_BCM2835_MMAL=n + CONFIG_RADIO_SI470X=y + CONFIG_USB_SI470X=m + CONFIG_I2C_SI470X=m +@@ -892,8 +841,6 @@ CONFIG_SND_VIRMIDI=m + CONFIG_SND_MTPAV=m + CONFIG_SND_SERIAL_U16550=m + CONFIG_SND_MPU401=m +-CONFIG_SND_ARM=n +-CONFIG_SND_BCM2835=n + CONFIG_SND_USB_AUDIO=m + CONFIG_SND_USB_UA101=m + CONFIG_SND_USB_CAIAQ=m +@@ -916,7 +863,10 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m + CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m + CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_AK4554=m + CONFIG_SND_SOC_WM8804_I2C=m + CONFIG_SND_SIMPLE_CARD=m + CONFIG_SOUND_PRIME=m +@@ -979,8 +929,6 @@ CONFIG_USB_HIDDEV=y + CONFIG_USB=y + CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + CONFIG_USB_MON=m +-CONFIG_USB_DWCOTG=n +-CONFIG_USB_DWC2=y + CONFIG_USB_PRINTER=m + CONFIG_USB_STORAGE=y + CONFIG_USB_STORAGE_REALTEK=m +@@ -1001,6 +949,7 @@ CONFIG_USB_MICROTEK=m + CONFIG_USBIP_CORE=m + CONFIG_USBIP_VHCI_HCD=m + CONFIG_USBIP_HOST=m ++CONFIG_USB_DWC2=y + CONFIG_USB_SERIAL=m + CONFIG_USB_SERIAL_GENERIC=y + CONFIG_USB_SERIAL_AIRCABLE=m +@@ -1096,6 +1045,7 @@ CONFIG_LEDS_TRIGGER_INPUT=y + CONFIG_LEDS_TRIGGER_PANIC=y + CONFIG_RTC_CLASS=y + # CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_ABX80X=m + CONFIG_RTC_DRV_DS1307=m + CONFIG_RTC_DRV_DS1374=m + CONFIG_RTC_DRV_DS1672=m +@@ -1103,7 +1053,6 @@ CONFIG_RTC_DRV_MAX6900=m + CONFIG_RTC_DRV_RS5C372=m + CONFIG_RTC_DRV_ISL1208=m + CONFIG_RTC_DRV_ISL12022=m +-CONFIG_RTC_DRV_ISL12057=m + CONFIG_RTC_DRV_X1205=m + CONFIG_RTC_DRV_PCF8523=m + CONFIG_RTC_DRV_PCF8563=m +@@ -1137,7 +1086,6 @@ CONFIG_STAGING=y + CONFIG_PRISM2_USB=m + CONFIG_R8712U=m + CONFIG_R8188EU=m +-CONFIG_R8723AU=m + CONFIG_VT6656=m + CONFIG_SPEAKUP=m + CONFIG_SPEAKUP_SYNTH_SOFT=m +@@ -1153,6 +1101,7 @@ CONFIG_FB_TFT_BD663474=m + CONFIG_FB_TFT_HX8340BN=m + CONFIG_FB_TFT_HX8347D=m + CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_HX8357D=m + CONFIG_FB_TFT_ILI9163=m + CONFIG_FB_TFT_ILI9320=m + CONFIG_FB_TFT_ILI9325=m +@@ -1176,6 +1125,7 @@ CONFIG_FB_TFT_UPD161704=m + CONFIG_FB_TFT_WATTEROTT=m + CONFIG_FB_FLEX=m + CONFIG_FB_TFT_FBTFT_DEVICE=m ++# CONFIG_BCM2708_VCHIQ is not set + CONFIG_MAILBOX=y + CONFIG_BCM2835_MBOX=y + # CONFIG_IOMMU_SUPPORT is not set +@@ -1189,6 +1139,7 @@ CONFIG_IIO_KFIFO_BUF=m + CONFIG_MCP320X=m + CONFIG_MCP3422=m + CONFIG_DHT11=m ++CONFIG_HTU21=m + CONFIG_PWM_BCM2835=m + CONFIG_PWM_PCA9685=m + CONFIG_RASPBERRYPI_FIRMWARE=y +@@ -1309,6 +1260,7 @@ CONFIG_BOOT_PRINTK_DELAY=y + CONFIG_DEBUG_MEMORY_INIT=y + CONFIG_DETECT_HUNG_TASK=y + CONFIG_TIMER_STATS=y ++CONFIG_LATENCYTOP=y + CONFIG_IRQSOFF_TRACER=y + CONFIG_SCHED_TRACER=y + CONFIG_STACK_TRACER=y +@@ -1331,5 +1283,3 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m + CONFIG_ARM64_CRYPTO=y + CONFIG_CRC_ITU_T=y + CONFIG_LIBCRC32C=y +-CONFIG_BCM2708_VCHIQ=n +-CONFIG_ARCH_BCM2835=y +-- +2.1.4 + |