summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx/patches-2.6.34/275-usb2-bcm5354-init.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.34/275-usb2-bcm5354-init.patch')
-rw-r--r--target/linux/brcm47xx/patches-2.6.34/275-usb2-bcm5354-init.patch63
1 files changed, 63 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.34/275-usb2-bcm5354-init.patch b/target/linux/brcm47xx/patches-2.6.34/275-usb2-bcm5354-init.patch
new file mode 100644
index 0000000..3d8327e
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.34/275-usb2-bcm5354-init.patch
@@ -0,0 +1,63 @@
+This patch significantly improves the reliability of high speed
+usb writes on the bcm5354. It implements a work around for version 2
+of the usb20 core that was cribbed from the GPL sources for the
+Asus wl500gpv2 and verified against the wl520gu sources.
+
+Reference:
+GPL/WL-520gu-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
+GPL/WL-500gPV2-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
+
+Signed-off-by: Steve Brown <sbrown@cortland.com>
+
+---
+ drivers/usb/host/ohci-ssb.c | 37 +++++++++++++++++++++++--------------
+ 1 file changed, 23 insertions(+), 14 deletions(-)
+
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -141,22 +141,31 @@ static int ssb_ohci_attach(struct ssb_de
+ */
+ ssb_device_enable(dev, 0);
+ ssb_write32(dev, 0x200, 0x7ff);
++
++ /* Change Flush control reg */
++ tmp = ssb_read32(dev, 0x400);
++ tmp &= ~8;
++ ssb_write32(dev, 0x400, tmp);
++ tmp = ssb_read32(dev, 0x400);
++
++ /* Change Shim control reg */
++ tmp = ssb_read32(dev, 0x304);
++ tmp &= ~0x100;
++ ssb_write32(dev, 0x304, tmp);
++ tmp = ssb_read32(dev, 0x304);
++
+ udelay(1);
+- if (dev->id.revision == 1) { // bug in rev 1
+
+- /* Change Flush control reg */
+- tmp = ssb_read32(dev, 0x400);
+- tmp &= ~8;
+- ssb_write32(dev, 0x400, tmp);
+- tmp = ssb_read32(dev, 0x400);
+- printk("USB20H fcr: 0x%0x\n", tmp);
+-
+- /* Change Shim control reg */
+- tmp = ssb_read32(dev, 0x304);
+- tmp &= ~0x100;
+- ssb_write32(dev, 0x304, tmp);
+- tmp = ssb_read32(dev, 0x304);
+- printk("USB20H shim: 0x%0x\n", tmp);
++ /* Work around for 5354 failures */
++ if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
++ /* Change syn01 reg */
++ tmp = 0x00fe00fe;
++ ssb_write32(dev, 0x894, tmp);
++
++ /* Change syn03 reg */
++ tmp = ssb_read32(dev, 0x89c);
++ tmp |= 0x1;
++ ssb_write32(dev, 0x89c, tmp);
+ }
+ } else
+ ssb_device_enable(dev, 0);