summaryrefslogtreecommitdiff
path: root/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch')
-rw-r--r--target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch151
1 files changed, 151 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch b/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch
new file mode 100644
index 0000000..78724ee
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch
@@ -0,0 +1,151 @@
+From b7c100827012ba588089807475affe0c69a3f817 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 6 Jun 2011 00:07:33 +0200
+Subject: [PATCH 06/14] bcma: add serial console support
+
+This adds support for serial console to bcma, when operating on an
+embedded device.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/bcma_private.h | 6 +++
+ drivers/bcma/driver_chipcommon.c | 64 +++++++++++++++++++++++++++++++++
+ drivers/bcma/driver_mips.c | 9 +++++
+ include/linux/bcma/bcma_driver_mips.h | 11 ++++++
+ 4 files changed, 90 insertions(+), 0 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -29,6 +29,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+ /* sprom.c */
+ int bcma_sprom_get(struct bcma_bus *bus);
+
++/* driver_chipcommon.c */
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++extern int bcma_chipco_serial_init(struct bcma_drv_cc *cc,
++ struct bcma_drv_mips_serial_port *ports);
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
++
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+ extern int __init bcma_host_pci_init(void);
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -92,3 +92,67 @@ u32 bcma_chipco_gpio_polarity(struct bcm
+ {
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+ }
++
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++int bcma_chipco_serial_init(struct bcma_drv_cc *cc,
++ struct bcma_drv_mips_serial_port *ports)
++{
++ int nr_ports = 0;
++ u32 plltype;
++ unsigned int irq;
++ u32 baud_base, div;
++ u32 i, n;
++ unsigned int ccrev = cc->core->id.rev;
++
++ plltype = (cc->capabilities & BCMA_CC_CAP_PLLT);
++ irq = bcma_core_mips_irq(cc->core);
++
++ if ((ccrev >= 11) && (ccrev != 15) && (ccrev != 20)) {
++ /* Fixed ALP clock */
++ baud_base = 20000000;
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ /* FIXME: baud_base is different for devices with a PMU */
++ WARN_ON(1);
++ }
++ div = 1;
++ if (ccrev >= 21) {
++ /* Turn off UART clock before switching clocksource. */
++ bcma_cc_write32(cc, BCMA_CC_CORECTL,
++ bcma_cc_read32(cc, BCMA_CC_CORECTL)
++ & ~BCMA_CC_CORECTL_UARTCLKEN);
++ }
++ /* Set the override bit so we don't divide it */
++ bcma_cc_write32(cc, BCMA_CC_CORECTL,
++ bcma_cc_read32(cc, BCMA_CC_CORECTL)
++ | BCMA_CC_CORECTL_UARTCLK0);
++ if (ccrev >= 21) {
++ /* Re-enable the UART clock. */
++ bcma_cc_write32(cc, BCMA_CC_CORECTL,
++ bcma_cc_read32(cc, BCMA_CC_CORECTL)
++ | BCMA_CC_CORECTL_UARTCLKEN);
++ }
++ } else
++ pr_err("serial not supported on this device ccrev: 0x%x\n",
++ ccrev);
++
++ /* Determine the registers of the UARTs */
++ n = (cc->capabilities & BCMA_CC_CAP_NRUART);
++ for (i = 0; i < n; i++) {
++ void __iomem *cc_mmio;
++ void __iomem *uart_regs;
++
++ cc_mmio = cc->core->bus->mmio +
++ (cc->core->core_index * BCMA_CORE_SIZE);
++ uart_regs = cc_mmio + BCMA_CC_UART0_DATA;
++ uart_regs += (i * 256);
++
++ nr_ports++;
++ ports[i].regs = uart_regs;
++ ports[i].irq = irq;
++ ports[i].baud_base = baud_base;
++ ports[i].reg_shift = 0;
++ }
++
++ return nr_ports;
++}
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -157,6 +157,14 @@ static void bcma_core_mips_dump_irq(stru
+ }
+ }
+
++static void bcma_core_mips_serial_init(struct bcma_drv_mips *mcore)
++{
++ struct bcma_bus *bus = mcore->core->bus;
++
++ mcore->nr_serial_ports = bcma_chipco_serial_init(&bus->drv_cc,
++ mcore->serial_ports);
++}
++
+ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+ {
+ struct bcma_bus *bus = mcore->core->bus;
+@@ -229,6 +237,7 @@ void bcma_core_mips_init(struct bcma_drv
+ if (mcore->setup_done)
+ return;
+
++ bcma_core_mips_serial_init(mcore);
+ bcma_core_mips_flash_detect(mcore);
+ mcore->setup_done = true;
+ }
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -32,11 +32,22 @@
+
+ struct bcma_device;
+
++struct bcma_drv_mips_serial_port {
++ void *regs;
++ unsigned long clockspeed;
++ unsigned int irq;
++ unsigned int baud_base;
++ unsigned int reg_shift;
++};
++
+ struct bcma_drv_mips {
+ struct bcma_device *core;
+ u8 setup_done:1;
+ unsigned int assigned_irqs;
+
++ int nr_serial_ports;
++ struct bcma_drv_mips_serial_port serial_ports[4];
++
+ u8 flash_buswidth;
+ u32 flash_window;
+ u32 flash_window_size;