1 files changed, 0 insertions, 78 deletions
diff --git a/target/linux/brcm47xx/patches-3.14/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch b/target/linux/brcm47xx/patches-3.14/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch
deleted file mode 100644
index e5bdb97..0000000
--- a/target/linux/brcm47xx/patches-3.14/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 1f3e1c682a0b5273e3ee8799b54319971f426e6a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 29 Jan 2014 18:06:52 +0100
-Subject: [RFC V2][PATCH] MIPS: BCM47XX: Add new file for device specific workarounds
-
----
-V2: Drop pr_debug for devices we don't need workarounds for. It was too
-    load and not useful at all.
----
- arch/mips/bcm47xx/Makefile          |  2 +-
- arch/mips/bcm47xx/bcm47xx_private.h |  3 +++
- arch/mips/bcm47xx/setup.c           |  1 +
- arch/mips/bcm47xx/workarounds.c     | 25 +++++++++++++++++++++++++
- 4 files changed, 30 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm47xx/workarounds.c
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -4,4 +4,4 @@
- #
- 
- obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
--obj-y				+= board.o buttons.o leds.o
-+obj-y				+= board.o buttons.o leds.o workarounds.o
---- a/arch/mips/bcm47xx/bcm47xx_private.h
-+++ b/arch/mips/bcm47xx/bcm47xx_private.h
-@@ -9,4 +9,7 @@ int __init bcm47xx_buttons_register(void
- /* leds.c */
- void __init bcm47xx_leds_register(void);
- 
-+/* workarounds.c */
-+void __init bcm47xx_workarounds(void);
-+
- #endif
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -282,6 +282,7 @@ static int __init bcm47xx_register_bus_c
- 	}
- 	bcm47xx_buttons_register();
- 	bcm47xx_leds_register();
-+	bcm47xx_workarounds();
- 
- 	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
- 	return 0;
---- /dev/null
-+++ b/arch/mips/bcm47xx/workarounds.c
-@@ -0,0 +1,31 @@
-+#include "bcm47xx_private.h"
-+
-+#include <linux/gpio.h>
-+#include <bcm47xx_board.h>
-+#include <bcm47xx.h>
-+
-+static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
-+{
-+	const int usb_power = 12;
-+	int err;
-+
-+	err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
-+	if (err)
-+		pr_err("Failed to request USB power gpio: %d\n", err);
-+	else
-+		gpio_free(usb_power);
-+}
-+
-+void __init bcm47xx_workarounds(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_NETGEAR_WNR3500L:
-+		bcm47xx_workarounds_netgear_wnr3500l();
-+		break;
-+	default:
-+		/* No workaround(s) needed */
-+		break;
-+	}
-+}