diff options
Diffstat (limited to 'target/linux/brcm47xx')
| -rw-r--r-- | target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch | 244 |
1 files changed, 122 insertions, 122 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch b/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch index 1c88b38..ea4bfe6 100644 --- a/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch +++ b/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch @@ -13,7 +13,7 @@ Index: linux-2.6.28.2/drivers/ssb/Makefile Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c 2009-02-02 20:57:13.000000000 +0100 ++++ linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c 2009-02-02 20:59:48.000000000 +0100 @@ -0,0 +1,481 @@ +/* + * Sonics Silicon Backplane @@ -119,15 +119,15 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + switch (bus->chip_id) { + case 0x4328: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, -+ ~(1 << SSB_PLLRES_4328_BB_PLL_PU)); ++ ~(1 << SSB_PMURES_4328_BB_PLL_PU)); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, -+ ~(1 << SSB_PLLRES_4328_BB_PLL_PU)); ++ ~(1 << SSB_PMURES_4328_BB_PLL_PU)); + break; + case 0x5354: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, -+ ~(1 << SSB_PLLRES_5354_BB_PLL_PU)); ++ ~(1 << SSB_PMURES_5354_BB_PLL_PU)); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, -+ ~(1 << SSB_PLLRES_5354_BB_PLL_PU)); ++ ~(1 << SSB_PMURES_5354_BB_PLL_PU)); + break; + default: + SSB_WARN_ON(1); @@ -260,11 +260,11 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + switch (bus->chip_id) { + case 0x4325: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, -+ ~((1 << SSB_PLLRES_4325_BBPLL_PWRSW_PU) | -+ (1 << SSB_PLLRES_4325_HT_AVAIL))); ++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_HT_AVAIL))); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, -+ ~((1 << SSB_PLLRES_4325_BBPLL_PWRSW_PU) | -+ (1 << SSB_PLLRES_4325_HT_AVAIL))); ++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_HT_AVAIL))); + /* Adjust the BBPLL to 2 on all channels later. */ + buffer_strength = 0x222222; + break; @@ -332,51 +332,51 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c +}; + +static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = { -+ { .resource = SSB_PLLRES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, }, -+ { .resource = SSB_PLLRES_4328_BB_SWITCHER_BURST, .updown = 0x010F, }, -+ { .resource = SSB_PLLRES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_ILP_REQUEST, .updown = 0x0202, }, -+ { .resource = SSB_PLLRES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_ROM_SWITCH, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_PA_REF_LDO, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_RADIO_LDO, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_AFE_LDO, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_PLL_LDO, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_BG_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_TX_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_RX_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_XTAL_PU, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_XTAL_EN, .updown = 0xA001, }, -+ { .resource = SSB_PLLRES_4328_BB_PLL_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_RF_PLL_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_BB_PLL_PU, .updown = 0x0701, }, ++ { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, }, ++ { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, }, ++ { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, }, ++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, }, ++ { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, }, +}; + +static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = { + { + /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */ -+ .resource = SSB_PLLRES_4328_ILP_REQUEST, ++ .resource = SSB_PMURES_4328_ILP_REQUEST, + .task = PMU_RES_DEP_SET, -+ .depend = ((1 << SSB_PLLRES_4328_EXT_SWITCHER_PWM) | -+ (1 << SSB_PLLRES_4328_BB_SWITCHER_PWM)), ++ .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)), + }, +}; + +static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = { -+ { .resource = SSB_PLLRES_4325_XTAL_PU, .updown = 0x1501, }, ++ { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, }, +}; + +static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = { + { + /* Adjust HT-Available dependencies. */ -+ .resource = SSB_PLLRES_4325_HT_AVAIL, ++ .resource = SSB_PMURES_4325_HT_AVAIL, + .task = PMU_RES_DEP_ADD, -+ .depend = ((1 << SSB_PLLRES_4325_RX_PWRSW_PU) | -+ (1 << SSB_PLLRES_4325_TX_PWRSW_PU) | -+ (1 << SSB_PLLRES_4325_LOGEN_PWRSW_PU) | -+ (1 << SSB_PLLRES_4325_AFE_PWRSW_PU)), ++ .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_TX_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_AFE_PWRSW_PU)), + }, +}; + @@ -399,11 +399,11 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + break; + case 0x4325: + /* Power OTP down later. */ -+ min_msk = (1 << SSB_PLLRES_4325_CBUCK_BURST) | -+ (1 << SSB_PLLRES_4325_LNLDO2_PU); ++ min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) | ++ (1 << SSB_PMURES_4325_LNLDO2_PU); + if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) & + SSB_CHIPCO_CHST_4325_PMUTOP_2B) -+ min_msk |= (1 << SSB_PLLRES_4325_CLDO_CBUCK_BURST); ++ min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST); + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + updown_tab = pmu_res_updown_tab_4325a0; @@ -412,9 +412,9 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0); + break; + case 0x4328: -+ min_msk = (1 << SSB_PLLRES_4328_EXT_SWITCHER_PWM) | -+ (1 << SSB_PLLRES_4328_BB_SWITCHER_PWM) | -+ (1 << SSB_PLLRES_4328_XTAL_EN); ++ min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_XTAL_EN); + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + updown_tab = pmu_res_updown_tab_4328a0; @@ -531,7 +531,7 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon.c Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h =================================================================== --- linux-2.6.28.2.orig/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-01 13:22:59.000000000 +0100 -+++ linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-01 21:09:37.000000000 +0100 ++++ linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-02 21:00:08.000000000 +0100 @@ -181,6 +181,16 @@ #define SSB_CHIPCO_PROG_WAITCNT 0x0124 #define SSB_CHIPCO_FLASH_CFG 0x0128 @@ -620,89 +620,89 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h +#define SSB_PMU1_PLLCTL5 5 + +/* BCM4312 PLL resource numbers. */ -+#define SSB_PLLRES_4312_SWITCHER_BURST 0 -+#define SSB_PLLRES_4312_SWITCHER_PWM 1 -+#define SSB_PLLRES_4312_PA_REF_LDO 2 -+#define SSB_PLLRES_4312_CORE_LDO_BURST 3 -+#define SSB_PLLRES_4312_CORE_LDO_PWM 4 -+#define SSB_PLLRES_4312_RADIO_LDO 5 -+#define SSB_PLLRES_4312_ILP_REQUEST 6 -+#define SSB_PLLRES_4312_BG_FILTBYP 7 -+#define SSB_PLLRES_4312_TX_FILTBYP 8 -+#define SSB_PLLRES_4312_RX_FILTBYP 9 -+#define SSB_PLLRES_4312_XTAL_PU 10 -+#define SSB_PLLRES_4312_ALP_AVAIL 11 -+#define SSB_PLLRES_4312_BB_PLL_FILTBYP 12 -+#define SSB_PLLRES_4312_RF_PLL_FILTBYP 13 -+#define SSB_PLLRES_4312_HT_AVAIL 14 ++#define SSB_PMURES_4312_SWITCHER_BURST 0 ++#define SSB_PMURES_4312_SWITCHER_PWM 1 ++#define SSB_PMURES_4312_PA_REF_LDO 2 ++#define SSB_PMURES_4312_CORE_LDO_BURST 3 ++#define SSB_PMURES_4312_CORE_LDO_PWM 4 ++#define SSB_PMURES_4312_RADIO_LDO 5 ++#define SSB_PMURES_4312_ILP_REQUEST 6 ++#define SSB_PMURES_4312_BG_FILTBYP 7 ++#define SSB_PMURES_4312_TX_FILTBYP 8 ++#define SSB_PMURES_4312_RX_FILTBYP 9 ++#define SSB_PMURES_4312_XTAL_PU 10 ++#define SSB_PMURES_4312_ALP_AVAIL 11 ++#define SSB_PMURES_4312_BB_PLL_FILTBYP 12 ++#define SSB_PMURES_4312_RF_PLL_FILTBYP 13 ++#define SSB_PMURES_4312_HT_AVAIL 14 + +/* BCM4325 PLL resource numbers. */ -+#define SSB_PLLRES_4325_BUCK_BOOST_BURST 0 -+#define SSB_PLLRES_4325_CBUCK_BURST 1 -+#define SSB_PLLRES_4325_CBUCK_PWM 2 -+#define SSB_PLLRES_4325_CLDO_CBUCK_BURST 3 -+#define SSB_PLLRES_4325_CLDO_CBUCK_PWM 4 -+#define SSB_PLLRES_4325_BUCK_BOOST_PWM 5 -+#define SSB_PLLRES_4325_ILP_REQUEST 6 -+#define SSB_PLLRES_4325_ABUCK_BURST 7 -+#define SSB_PLLRES_4325_ABUCK_PWM 8 -+#define SSB_PLLRES_4325_LNLDO1_PU 9 -+#define SSB_PLLRES_4325_LNLDO2_PU 10 -+#define SSB_PLLRES_4325_LNLDO3_PU 11 -+#define SSB_PLLRES_4325_LNLDO4_PU 12 -+#define SSB_PLLRES_4325_XTAL_PU 13 -+#define SSB_PLLRES_4325_ALP_AVAIL 14 -+#define SSB_PLLRES_4325_RX_PWRSW_PU 15 -+#define SSB_PLLRES_4325_TX_PWRSW_PU 16 -+#define SSB_PLLRES_4325_RFPLL_PWRSW_PU 17 -+#define SSB_PLLRES_4325_LOGEN_PWRSW_PU 18 -+#define SSB_PLLRES_4325_AFE_PWRSW_PU 19 -+#define SSB_PLLRES_4325_BBPLL_PWRSW_PU 20 -+#define SSB_PLLRES_4325_HT_AVAIL 21 ++#define SSB_PMURES_4325_BUCK_BOOST_BURST 0 ++#define SSB_PMURES_4325_CBUCK_BURST 1 ++#define SSB_PMURES_4325_CBUCK_PWM 2 ++#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3 ++#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4 ++#define SSB_PMURES_4325_BUCK_BOOST_PWM 5 ++#define SSB_PMURES_4325_ILP_REQUEST 6 ++#define SSB_PMURES_4325_ABUCK_BURST 7 ++#define SSB_PMURES_4325_ABUCK_PWM 8 ++#define SSB_PMURES_4325_LNLDO1_PU 9 ++#define SSB_PMURES_4325_LNLDO2_PU 10 ++#define SSB_PMURES_4325_LNLDO3_PU 11 ++#define SSB_PMURES_4325_LNLDO4_PU 12 ++#define SSB_PMURES_4325_XTAL_PU 13 ++#define SSB_PMURES_4325_ALP_AVAIL 14 ++#define SSB_PMURES_4325_RX_PWRSW_PU 15 ++#define SSB_PMURES_4325_TX_PWRSW_PU 16 ++#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17 ++#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18 ++#define SSB_PMURES_4325_AFE_PWRSW_PU 19 ++#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20 ++#define SSB_PMURES_4325_HT_AVAIL 21 + +/* BCM4328 PLL resource numbers. */ -+#define SSB_PLLRES_4328_EXT_SWITCHER_PWM 0 -+#define SSB_PLLRES_4328_BB_SWITCHER_PWM 1 -+#define SSB_PLLRES_4328_BB_SWITCHER_BURST 2 -+#define SSB_PLLRES_4328_BB_EXT_SWITCHER_BURST 3 -+#define SSB_PLLRES_4328_ILP_REQUEST 4 -+#define SSB_PLLRES_4328_RADIO_SWITCHER_PWM 5 -+#define SSB_PLLRES_4328_RADIO_SWITCHER_BURST 6 -+#define SSB_PLLRES_4328_ROM_SWITCH 7 -+#define SSB_PLLRES_4328_PA_REF_LDO 8 -+#define SSB_PLLRES_4328_RADIO_LDO 9 -+#define SSB_PLLRES_4328_AFE_LDO 10 -+#define SSB_PLLRES_4328_PLL_LDO 11 -+#define SSB_PLLRES_4328_BG_FILTBYP 12 -+#define SSB_PLLRES_4328_TX_FILTBYP 13 -+#define SSB_PLLRES_4328_RX_FILTBYP 14 -+#define SSB_PLLRES_4328_XTAL_PU 15 -+#define SSB_PLLRES_4328_XTAL_EN 16 -+#define SSB_PLLRES_4328_BB_PLL_FILTBYP 17 -+#define SSB_PLLRES_4328_RF_PLL_FILTBYP 18 -+#define SSB_PLLRES_4328_BB_PLL_PU 19 ++#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0 ++#define SSB_PMURES_4328_BB_SWITCHER_PWM 1 ++#define SSB_PMURES_4328_BB_SWITCHER_BURST 2 ++#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3 ++#define SSB_PMURES_4328_ILP_REQUEST 4 ++#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5 ++#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6 ++#define SSB_PMURES_4328_ROM_SWITCH 7 ++#define SSB_PMURES_4328_PA_REF_LDO 8 ++#define SSB_PMURES_4328_RADIO_LDO 9 ++#define SSB_PMURES_4328_AFE_LDO 10 ++#define SSB_PMURES_4328_PLL_LDO 11 ++#define SSB_PMURES_4328_BG_FILTBYP 12 ++#define SSB_PMURES_4328_TX_FILTBYP 13 ++#define SSB_PMURES_4328_RX_FILTBYP 14 ++#define SSB_PMURES_4328_XTAL_PU 15 ++#define SSB_PMURES_4328_XTAL_EN 16 ++#define SSB_PMURES_4328_BB_PLL_FILTBYP 17 ++#define SSB_PMURES_4328_RF_PLL_FILTBYP 18 ++#define SSB_PMURES_4328_BB_PLL_PU 19 + +/* BCM5354 PLL resource numbers. */ -+#define SSB_PLLRES_5354_EXT_SWITCHER_PWM 0 -+#define SSB_PLLRES_5354_BB_SWITCHER_PWM 1 -+#define SSB_PLLRES_5354_BB_SWITCHER_BURST 2 -+#define SSB_PLLRES_5354_BB_EXT_SWITCHER_BURST 3 -+#define SSB_PLLRES_5354_ILP_REQUEST 4 -+#define SSB_PLLRES_5354_RADIO_SWITCHER_PWM 5 -+#define SSB_PLLRES_5354_RADIO_SWITCHER_BURST 6 -+#define SSB_PLLRES_5354_ROM_SWITCH 7 -+#define SSB_PLLRES_5354_PA_REF_LDO 8 -+#define SSB_PLLRES_5354_RADIO_LDO 9 -+#define SSB_PLLRES_5354_AFE_LDO 10 -+#define SSB_PLLRES_5354_PLL_LDO 11 -+#define SSB_PLLRES_5354_BG_FILTBYP 12 -+#define SSB_PLLRES_5354_TX_FILTBYP 13 -+#define SSB_PLLRES_5354_RX_FILTBYP 14 -+#define SSB_PLLRES_5354_XTAL_PU 15 -+#define SSB_PLLRES_5354_XTAL_EN 16 -+#define SSB_PLLRES_5354_BB_PLL_FILTBYP 17 -+#define SSB_PLLRES_5354_RF_PLL_FILTBYP 18 -+#define SSB_PLLRES_5354_BB_PLL_PU 19 ++#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0 ++#define SSB_PMURES_5354_BB_SWITCHER_PWM 1 ++#define SSB_PMURES_5354_BB_SWITCHER_BURST 2 ++#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3 ++#define SSB_PMURES_5354_ILP_REQUEST 4 ++#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5 ++#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6 ++#define SSB_PMURES_5354_ROM_SWITCH 7 ++#define SSB_PMURES_5354_PA_REF_LDO 8 ++#define SSB_PMURES_5354_RADIO_LDO 9 ++#define SSB_PMURES_5354_AFE_LDO 10 ++#define SSB_PMURES_5354_PLL_LDO 11 ++#define SSB_PMURES_5354_BG_FILTBYP 12 ++#define SSB_PMURES_5354_TX_FILTBYP 13 ++#define SSB_PMURES_5354_RX_FILTBYP 14 ++#define SSB_PMURES_5354_XTAL_PU 15 ++#define SSB_PMURES_5354_XTAL_EN 16 ++#define SSB_PMURES_5354_BB_PLL_FILTBYP 17 ++#define SSB_PMURES_5354_RF_PLL_FILTBYP 18 ++#define SSB_PMURES_5354_BB_PLL_PU 19 + + + |