summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch')
-rw-r--r--target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch9656
1 files changed, 9656 insertions, 0 deletions
diff --git a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
new file mode 100644
index 0000000..c079c5a
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
@@ -0,0 +1,9656 @@
+diff -urN linux.old/arch/mips/bcm963xx/bcm63xx_led.c linux.dev/arch/mips/bcm963xx/bcm63xx_led.c
+--- linux.old/arch/mips/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/bcm63xx_led.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,582 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***************************************************************************
++ * File Name : bcm63xx_led.c
++ *
++ * Description:
++ *
++ * This file contains bcm963xx board led control API functions.
++ *
++ * To use it, do the following
++ *
++ * 1). define in the board.c the following led mappping (this is for 6345GW board):
++ * const LED_MAP_PAIR cLedMapping45GW[] =
++ * { // led name Initial state physical pin (ledMask)
++ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7},
++ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8},
++ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9
++ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9},
++ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10},
++ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end.
++ *
++ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping
++ * pointer from the above struct
++ *
++ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
++ *
++ * 3). Sample call for kernel mode:
++ *
++ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h
++ *
++ * 4). Sample call for user mode
++ *
++ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h
++ *
++ *
++ * Created on : 10/28/2002 seanl
++ *
++ ***************************************************************************/
++
++/* Includes. */
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <asm/uaccess.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++
++#define k100ms (HZ / 10) // ~100 ms
++#define kFastBlinkCount 0 // ~100ms
++#define kSlowBlinkCount 5 // ~600ms
++
++#define MAX_VIRT_LEDS 12
++
++// uncomment // for debug led
++//#define DEBUG_LED
++
++// global variables:
++struct timer_list gLedTimer;
++int gTimerOn = FALSE;
++int gLedCount = 0;
++
++typedef struct ledinfo
++{
++ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400
++ unsigned short ledActiveLow; // GPIO bit reset to turn on LED
++ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400
++ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
++ BOARD_LED_STATE ledState; // current led state
++ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState
++ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer.
++} LED_INFO, *PLED_INFO;
++
++static PLED_INFO gLed = NULL;
++static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
++static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
++static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
++
++#if 0 /* BROKEN */
++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++static int gLedOffInBridgeMode = 1;
++#elif defined(CONFIG_BCM96345)
++static int gLedOffInBridgeMode = 0;
++#endif
++#endif
++
++void ledTimerExpire(void);
++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
++
++//**************************************************************************************
++// LED operations
++//**************************************************************************************
++
++// turn led on and set the ledState
++void ledOn(PLED_INFO pLed)
++{
++ if( pLed->ledMask )
++ {
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLow )
++ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led
++ else
++ GPIO->GPIOio |= pLed->ledMask; // turn on the led
++ pLed->ledState = pLed->savedLedState = kLedStateOn;
++ }
++}
++
++
++// turn led off and set the ledState
++void ledOff(PLED_INFO pLed)
++{
++ if( pLed->ledMask )
++ {
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLow )
++ GPIO->GPIOio |= pLed->ledMask; // turn off the led
++ else
++ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led
++ pLed->ledState = pLed->savedLedState = kLedStateOff;
++ }
++}
++
++// turn led on and set the ledState
++void ledOnFail(PLED_INFO pLed)
++{
++ if( pLed->ledMaskFail )
++ {
++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLowFail )
++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led
++ else
++ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led
++ pLed->ledState = pLed->savedLedState = kLedStateFail;
++ }
++}
++
++
++// turn led off and set the ledState
++void ledOffFail(PLED_INFO pLed)
++{
++ if( pLed->ledMaskFail )
++ {
++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLowFail )
++ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led
++ else
++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led
++ pLed->ledState = pLed->savedLedState = kLedStateOff;
++ }
++}
++
++
++// toggle the led and return the current ledState
++BOARD_LED_STATE ledToggle(PLED_INFO pLed)
++{
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if (GPIO->GPIOio & pLed->ledMask)
++ {
++ GPIO->GPIOio &= ~(pLed->ledMask);
++ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
++ }
++ else
++ {
++ GPIO->GPIOio |= pLed->ledMask;
++ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
++ }
++}
++
++
++// led timer. Will return if timer is already on
++void ledTimerStart(void)
++{
++ if (gTimerOn)
++ return;
++
++#if defined(DEBUG_LED)
++ printk("led: add_timer\n");
++#endif
++
++ init_timer(&gLedTimer);
++ gLedTimer.function = (void*)ledTimerExpire;
++ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms
++ add_timer (&gLedTimer);
++ gTimerOn = TRUE;
++}
++
++
++// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
++// restart the timer according to ledState
++void ledTimerExpire(void)
++{
++ int i;
++ PLED_INFO pCurLed;
++
++ gTimerOn = FALSE;
++
++ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
++ {
++#if defined(DEBUG_LED)
++ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
++#endif
++ switch (pCurLed->ledState)
++ {
++ case kLedStateOn:
++ case kLedStateOff:
++ case kLedStateFail:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ break;
++
++ case kLedStateBlinkOnce:
++ ledToggle(pCurLed);
++ pCurLed->blinkCountDown = 0; // reset to 0
++ pCurLed->ledState = pCurLed->savedLedState;
++ if (pCurLed->ledState == kLedStateSlowBlinkContinues ||
++ pCurLed->ledState == kLedStateFastBlinkContinues)
++ ledTimerStart(); // start timer if in blinkContinues stats
++ break;
++
++ case kLedStateSlowBlinkContinues:
++ if (pCurLed->blinkCountDown-- == 0)
++ {
++ pCurLed->blinkCountDown = kSlowBlinkCount;
++ ledToggle(pCurLed);
++ }
++ ledTimerStart();
++ break;
++
++ case kLedStateFastBlinkContinues:
++ if (pCurLed->blinkCountDown-- == 0)
++ {
++ pCurLed->blinkCountDown = kFastBlinkCount;
++ ledToggle(pCurLed);
++ }
++ ledTimerStart();
++ break;
++
++ default:
++ printk("Invalid state = %d\n", pCurLed->ledState);
++ }
++ }
++}
++
++// initialize the gLedCount and allocate and fill gLed struct
++void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
++{
++ PLED_MAP_PAIR p1, p2;
++ PLED_INFO pCurLed;
++ int needTimer = FALSE;
++ int alreadyUsed = 0;
++
++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
++ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
++ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
++#endif
++
++ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
++ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
++ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
++
++ gLedCount = 0;
++
++ // Check for multiple LED names and multiple LED GPIO pins that share the
++ // same physical board LED.
++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
++ {
++ alreadyUsed = 0;
++ for( p2 = cLedMapping; p2 != p1; p2++ )
++ {
++ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
++ {
++ alreadyUsed = 1;
++ break;
++ }
++ }
++
++ if( alreadyUsed == 0 )
++ gLedCount++;
++ }
++
++ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
++ if( gLed == NULL )
++ {
++ printk( "LED memory allocation error.\n" );
++ return;
++ }
++
++ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
++
++ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led
++ // (ledMask) the first defined led's ledInitState will be used.
++ pCurLed = gLed;
++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
++ {
++ if( (int) p1->ledName > MAX_VIRT_LEDS )
++ continue;
++
++ alreadyUsed = 0;
++ for( p2 = cLedMapping; p2 != p1; p2++ )
++ {
++ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
++ {
++ alreadyUsed = 1;
++ break;
++ }
++ }
++
++ if( alreadyUsed == 0 )
++ {
++ // Initialize the board LED for the first time.
++ needTimer = initLedInfo( p1, pCurLed );
++ gpVirtLeds[(int) p1->ledName] = pCurLed;
++ pCurLed++;
++ }
++ else
++ {
++ PLED_INFO pLed;
++ for( pLed = gLed; pLed != pCurLed; pLed++ )
++ {
++ // Find the LED_INFO structure that has already been initialized.
++ if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
++ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
++ {
++ // The board LED has already been initialized but possibly
++ // not completely initialized.
++ if( p1->ledMask )
++ {
++ pLed->ledMask = p1->ledMask;
++ pLed->ledActiveLow = p1->ledActiveLow;
++ }
++ if( p1->ledMaskFail )
++ {
++ pLed->ledMaskFail = p1->ledMaskFail;
++ pLed->ledActiveLowFail = p1->ledActiveLowFail;
++ }
++ gpVirtLeds[(int) p1->ledName] = pLed;
++ break;
++ }
++ }
++ }
++ }
++
++ if (needTimer)
++ ledTimerStart();
++
++#if defined(DEBUG_LED)
++ int i;
++ for (i=0; i < gLedCount; i++)
++ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
++#endif
++
++}
++
++// Initialize a structure that contains information about a physical board LED
++// control. The board LED may contain more than one GPIO pin to control a
++// normal condition (green) or a failure condition (red).
++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
++{
++ int needTimer = FALSE;
++ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
++ pCurLed->ledMask = pCurMap->ledMask;
++ pCurLed->ledActiveLow = pCurMap->ledActiveLow;
++ pCurLed->ledMaskFail = pCurMap->ledMaskFail;
++ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
++
++ switch (pCurLed->ledState)
++ {
++ case kLedStateOn:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOn(pCurLed);
++ break;
++ case kLedStateOff:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOff(pCurLed);
++ break;
++ case kLedStateFail:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOnFail(pCurLed);
++ break;
++ case kLedStateBlinkOnce:
++ pCurLed->blinkCountDown = 1;
++ needTimer = TRUE;
++ break;
++ case kLedStateSlowBlinkContinues:
++ pCurLed->blinkCountDown = kSlowBlinkCount;
++ needTimer = TRUE;
++ break;
++ case kLedStateFastBlinkContinues:
++ pCurLed->blinkCountDown = kFastBlinkCount;
++ needTimer = TRUE;
++ break;
++ default:
++ printk("Invalid state = %d\n", pCurLed->ledState);
++ }
++
++ return( needTimer );
++}
++
++#if 0 /* BROKEN */
++// Determines if there is at least one interface in bridge mode. Bridge mode
++// is determined by the cfm convention of naming bridge interfaces nas17
++// through nas24.
++static int isBridgedProtocol(void)
++{
++ extern int dev_get(const char *name);
++ const int firstBridgeId = 17;
++ const int lastBridgeId = 24;
++ int i;
++ int ret = FALSE;
++ char name[16];
++
++ for( i = firstBridgeId; i <= lastBridgeId; i++ )
++ {
++ sprintf( name, "nas%d", i );
++
++ if( dev_get(name) )
++ {
++ ret = TRUE;
++ break;
++ }
++ }
++
++ return(ret);
++}
++#endif
++
++// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation
++void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
++{
++ PLED_INFO ledInfoPtr;
++
++ // do the mapping from virtual to physical led
++ if( (int) ledName < MAX_VIRT_LEDS )
++ ledInfoPtr = gpVirtLeds[(int) ledName];
++ else
++ ledInfoPtr = NULL;
++
++ if (ledInfoPtr == NULL)
++ return;
++
++ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
++ {
++ (*gLedHwFunc[(int) ledName]) (ledName, ledState);
++ ledOffFail(ledInfoPtr);
++ return;
++ }
++ else
++ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
++ {
++ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
++ ledOff(ledInfoPtr);
++ return;
++ }
++
++#if 0 /* BROKEN */
++ // Do not blink the WAN Data LED if at least one interface is in bridge mode.
++ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
++ {
++ static int BridgedProtocol = -1;
++
++ if( BridgedProtocol == -1 )
++ BridgedProtocol = isBridgedProtocol();
++
++ if( BridgedProtocol == TRUE )
++ return;
++ }
++#endif
++
++ // If the state is kLedStateFail and there is not a failure LED defined
++ // in the board parameters, change the state to kLedStateFastBlinkContinues.
++ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
++ ledState = kLedStateFastBlinkContinues;
++
++ switch (ledState)
++ {
++ case kLedStateOn:
++ // First, turn off the complimentary (failure) LED GPIO.
++ if( ledInfoPtr->ledMaskFail )
++ ledOffFail(ledInfoPtr);
++ else
++ if( gLedHwFailFunc[(int) ledName] )
++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn on the specified LED GPIO.
++ ledOn(ledInfoPtr);
++ break;
++
++ case kLedStateOff:
++ // First, turn off the complimentary (failure) LED GPIO.
++ if( ledInfoPtr->ledMaskFail )
++ ledOffFail(ledInfoPtr);
++ else
++ if( gLedHwFailFunc[(int) ledName] )
++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn off the specified LED GPIO.
++ ledOff(ledInfoPtr);
++ break;
++
++ case kLedStateFail:
++ // First, turn off the complimentary (normal) LED GPIO.
++ if( ledInfoPtr->ledMask )
++ ledOff(ledInfoPtr);
++ else
++ if( gLedHwFunc[(int) ledName] )
++ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn on (red) the specified LED GPIO.
++ ledOnFail(ledInfoPtr);
++ break;
++
++ case kLedStateBlinkOnce:
++ // skip blinkOnce if it is already in Slow/Fast blink continues state
++ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
++ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
++ ;
++ else
++ {
++ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1
++ {
++ ledToggle(ledInfoPtr);
++ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires
++ ledInfoPtr->ledState = kLedStateBlinkOnce;
++ ledTimerStart();
++ }
++ }
++ break;
++
++ case kLedStateSlowBlinkContinues:
++ ledInfoPtr->blinkCountDown = kSlowBlinkCount;
++ ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
++ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
++ ledTimerStart();
++ break;
++
++ case kLedStateFastBlinkContinues:
++ ledInfoPtr->blinkCountDown = kFastBlinkCount;
++ ledInfoPtr->ledState = kLedStateFastBlinkContinues;
++ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
++ ledTimerStart();
++ break;
++
++ default:
++ printk("Invalid led state\n");
++ }
++}
++
++// This function is called for an LED that is controlled by hardware.
++void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
++ HANDLE_LED_FUNC ledHwFunc, int ledFailType )
++{
++ if( (int) ledName < MAX_VIRT_LEDS )
++ {
++ if( ledFailType == 1 )
++ gLedHwFailFunc[(int) ledName] = ledHwFunc;
++ else
++ gLedHwFunc[(int) ledName] = ledHwFunc;
++ }
++}
++
+diff -urN linux.old/arch/mips/bcm963xx/board.c linux.dev/arch/mips/bcm963xx/board.c
+--- linux.old/arch/mips/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/board.c 2006-08-27 21:02:04.000000000 +0200
+@@ -0,0 +1,559 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++/* Includes. */
++#include <linux/version.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/pagemap.h>
++#include <asm/uaccess.h>
++#include <linux/wait.h>
++#include <linux/poll.h>
++#include <linux/sched.h>
++#include <linux/list.h>
++#include <linux/if.h>
++#include <linux/spinlock.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#include <bcmTag.h>
++#include "boardparms.h"
++#include "bcm_intr.h"
++#include "board.h"
++#include "bcm_map_part.h"
++
++static DEFINE_SPINLOCK(board_lock);
++
++/* Typedefs. */
++#if defined (NON_CONSECUTIVE_MAC)
++// used to be the last octet. Now changed to the first 5 bits of the the forth octet
++// to reduced the duplicated MAC addresses.
++#define CHANGED_OCTET 3
++#define SHIFT_BITS 3
++#else
++#define CHANGED_OCTET 1
++#define SHIFT_BITS 0
++#endif
++
++typedef struct
++{
++ unsigned long ulId;
++ char chInUse;
++ char chReserved[3];
++} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
++
++typedef struct
++{
++ unsigned long ulSdramSize;
++ unsigned long ulPsiSize;
++ unsigned long ulNumMacAddrs;
++ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ MAC_ADDR_INFO MacAddrs[1];
++} NVRAM_INFO, *PNVRAM_INFO;
++
++typedef struct
++{
++ unsigned long eventmask;
++} BOARD_IOC, *PBOARD_IOC;
++
++
++/*Dyinggasp callback*/
++typedef void (*cb_dgasp_t)(void *arg);
++typedef struct _CB_DGASP__LIST
++{
++ struct list_head list;
++ char name[IFNAMSIZ];
++ cb_dgasp_t cb_dgasp_fn;
++ void *context;
++}CB_DGASP_LIST , *PCB_DGASP_LIST;
++
++
++static LED_MAP_PAIR LedMapping[] =
++{ // led name Initial state physical pin (ledMask)
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
++};
++
++/* Externs. */
++extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
++extern unsigned int nr_free_pages (void);
++extern const char *get_system_type(void);
++extern void kerSysFlashInit(void);
++extern unsigned long get_nvram_start_addr(void);
++extern unsigned long get_scratch_pad_start_addr(void);
++extern unsigned long getMemorySize(void);
++extern void __init boardLedInit(PLED_MAP_PAIR);
++extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
++extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
++ HANDLE_LED_FUNC ledHwFunc, int ledFailType );
++
++/* Prototypes. */
++void __init InitNvramInfo( void );
++
++/* DyingGasp function prototype */
++static void __init kerSysDyingGaspMapIntr(void);
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs);
++static void __init kerSysInitDyingGaspHandler( void );
++static void __exit kerSysDeinitDyingGaspHandler( void );
++/* -DyingGasp function prototype - */
++
++static PNVRAM_INFO g_pNvramInfo = NULL;
++static int g_ledInitialized = 0;
++static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
++
++static int g_wakeup_monitor = 0;
++static struct file *g_monitor_file = NULL;
++static struct task_struct *g_monitor_task = NULL;
++static unsigned int (*g_orig_fop_poll)
++ (struct file *, struct poll_table_struct *) = NULL;
++
++void kerSysMipsSoftReset(void)
++{
++ if (PERF->RevID == 0x634800A1) {
++ typedef void (*FNPTR) (void);
++ FNPTR bootaddr = (FNPTR) FLASH_BASE;
++ int i;
++
++ /* Disable interrupts. */
++ //cli();
++ spin_lock_irq(&board_lock);
++
++ /* Reset all blocks. */
++ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
++ for( i = 0; i < 1000000; i++ )
++ ;
++ PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
++ /* Jump to the power on address. */
++ (*bootaddr) ();
++ }
++ else
++ PERF->pll_control |= SOFT_RESET; // soft reset mips
++}
++
++
++int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
++{
++ int nRet = 0;
++ PMAC_ADDR_INFO pMai = NULL;
++ PMAC_ADDR_INFO pMaiFreeNoId = NULL;
++ PMAC_ADDR_INFO pMaiFreeId = NULL;
++ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
++
++ /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas
++ * * à relire plusieurs fois */
++ /* inv_xde */
++#if 0
++ if (boot_loader_type == BOOT_CFE)
++ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
++ NVRAM_MAC_ADDRESS_LEN );
++ else {
++#endif
++ pucaMacAddr[0] = 0x00;
++ pucaMacAddr[1] = 0x07;
++ pucaMacAddr[2] = 0x3A;
++ pucaMacAddr[3] = 0xFF;
++ pucaMacAddr[4] = 0xFF;
++ pucaMacAddr[5] = 0xFF;
++#if 0
++ }
++#endif
++
++ return nRet;
++} /* kerSysGetMacAddr */
++
++int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
++{
++ int nRet = -EINVAL;
++ unsigned long ulIdx = 0;
++ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
++ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
++
++ // if overflow 255 (negitive), add 256 to have the correct index
++ if (idx < 0)
++ idx += 256;
++ ulIdx = (unsigned long) (idx >> SHIFT_BITS);
++
++ if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
++ {
++ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
++ if( pMai->chInUse == 1 )
++ {
++ pMai->chInUse = 0;
++ nRet = 0;
++ }
++ }
++
++ return( nRet );
++} /* kerSysReleaseMacAddr */
++
++int kerSysGetSdramSize( void )
++{
++ if (boot_loader_type == BOOT_CFE) {
++ return( (int) g_pNvramInfo->ulSdramSize );
++ }
++ else {
++ printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000);
++ return((int)getMemorySize() + 0x00040000);
++ }
++} /* kerSysGetSdramSize */
++
++
++void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
++{
++ if (g_ledInitialized)
++ boardLedCtrl(ledName, ledState);
++}
++
++unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
++{
++ int mask = (*g_orig_fop_poll) (f, t);
++
++ if( g_wakeup_monitor == 1 && g_monitor_file == f )
++ {
++ /* If g_wakeup_monitor is non-0, the user mode application needs to
++ * return from a blocking select function. Return POLLPRI which will
++ * cause the select to return with the exception descriptor set.
++ */
++ mask |= POLLPRI;
++ g_wakeup_monitor = 0;
++ }
++
++ return( mask );
++}
++
++/* Put the user mode application that monitors link state on a run queue. */
++void kerSysWakeupMonitorTask( void )
++{
++ g_wakeup_monitor = 1;
++ if( g_monitor_task )
++ wake_up_process( g_monitor_task );
++}
++
++//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
++int kerSysGetResetHold(void)
++{
++ unsigned short gpio;
++
++ if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS )
++ {
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++
++ if( (gpio & ~BP_ACTIVE_MASK) >= 32 )
++ {
++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio);
++ gpio_reg = &GPIO->GPIOio_high;
++ }
++ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg);
++ if(*gpio_reg & gpio_mask) //press down
++ return RESET_BUTTON_UP;
++ }
++ return RESET_BUTTON_PRESSDOWN;
++}
++//<<JUNHON, 2004/09/15
++
++/***************************************************************************
++ * Dying gasp ISR and functions.
++ ***************************************************************************/
++#define KERSYS_DBG printk
++
++#if defined(CONFIG_BCM96345)
++#define CYCLE_PER_US 70
++#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++/* The BCM6348 cycles per microsecond is really variable since the BCM6348
++ * MIPS speed can vary depending on the PLL settings. However, an appoximate
++ * value of 120 will still work OK for the test being done.
++ */
++#define CYCLE_PER_US 120
++#endif
++#define DG_GLITCH_TO (100*CYCLE_PER_US)
++
++static void __init kerSysDyingGaspMapIntr()
++{
++ unsigned long ulIntr;
++
++#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
++ BcmHalInterruptEnable( INTERRUPT_ID_DG );
++ }
++#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
++ ulIntr += INTERRUPT_ID_EXTERNAL_0;
++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
++ BcmHalInterruptEnable( ulIntr );
++ }
++#endif
++
++}
++
++void kerSysSetWdTimer(ulong timeUs)
++{
++ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
++ TIMER->WatchDogCtl = 0xFF00;
++ TIMER->WatchDogCtl = 0x00FF;
++}
++
++ulong kerSysGetCycleCount(void)
++{
++ ulong cnt;
++#ifdef _WIN32_WCE
++ cnt = 0;
++#else
++ __asm volatile("mfc0 %0, $9":"=d"(cnt));
++#endif
++ return(cnt);
++}
++
++static Bool kerSysDyingGaspCheckPowerLoss(void)
++{
++ ulong clk0;
++ ulong ulIntr;
++
++ ulIntr = 0;
++ clk0 = kerSysGetCycleCount();
++
++ UART->Data = 'D';
++ UART->Data = '%';
++ UART->Data = 'G';
++
++#if defined(CONFIG_BCM96345)
++ BpGetAdslDyingGaspExtIntr( &ulIntr );
++
++ do {
++ ulong clk1;
++
++ clk1 = kerSysGetCycleCount(); /* time cleared */
++ /* wait a little to get new reading */
++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
++ ;
++ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
++
++ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */
++ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
++ return 0;
++ }
++#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
++ do {
++ ulong clk1;
++
++ clk1 = kerSysGetCycleCount(); /* time cleared */
++ /* wait a little to get new reading */
++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
++ ;
++ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
++
++ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
++ BcmHalInterruptEnable( INTERRUPT_ID_DG );
++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
++ return 0;
++ }
++#endif
++ return 1;
++}
++
++static void kerSysDyingGaspShutdown( void )
++{
++ kerSysSetWdTimer(1000000);
++#if defined(CONFIG_BCM96345)
++ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
++#elif defined(CONFIG_BCM96348)
++ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
++#endif
++}
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs)
++#else
++static unsigned int kerSysDyingGaspIsr(void)
++#endif
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp, *dsl = NULL;
++
++ if (kerSysDyingGaspCheckPowerLoss()) {
++
++ /* first to turn off everything other than dsl */
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ if(strncmp(tmp->name, "dsl", 3)) {
++ (tmp->cb_dgasp_fn)(tmp->context);
++ }else {
++ dsl = tmp;
++ }
++ }
++
++ /* now send dgasp */
++ if(dsl)
++ (dsl->cb_dgasp_fn)(dsl->context);
++
++ /* reset and shutdown system */
++ kerSysDyingGaspShutdown();
++ }
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++return( IRQ_HANDLED );
++#else
++ return( 1 );
++#endif
++}
++
++static void __init kerSysInitDyingGaspHandler( void )
++{
++ CB_DGASP_LIST *new_node;
++
++ if( g_cb_dgasp_list_head != NULL) {
++ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
++ return;
++ }
++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
++ INIT_LIST_HEAD(&new_node->list);
++ g_cb_dgasp_list_head = new_node;
++
++} /* kerSysInitDyingGaspHandler */
++
++static void __exit kerSysDeinitDyingGaspHandler( void )
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp;
++
++ if(g_cb_dgasp_list_head == NULL)
++ return;
++
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ list_del(pos);
++ kfree(tmp);
++ }
++
++ kfree(g_cb_dgasp_list_head);
++ g_cb_dgasp_list_head = NULL;
++
++} /* kerSysDeinitDyingGaspHandler */
++
++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
++{
++ CB_DGASP_LIST *new_node;
++
++ if( g_cb_dgasp_list_head == NULL) {
++ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");
++ return;
++ }
++
++ if( devname == NULL || cbfn == NULL ) {
++ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);
++ return;
++ }
++
++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
++ INIT_LIST_HEAD(&new_node->list);
++ strncpy(new_node->name, devname, IFNAMSIZ);
++ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
++ new_node->context = context;
++ list_add(&new_node->list, &g_cb_dgasp_list_head->list);
++
++ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
++
++} /* kerSysRegisterDyingGaspHandler */
++
++void kerSysDeregisterDyingGaspHandler(char *devname)
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp;
++
++ if(g_cb_dgasp_list_head == NULL) {
++ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
++ return;
++ }
++
++ if(devname == NULL) {
++ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
++ return;
++ }
++
++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
++
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ if(!strcmp(tmp->name, devname)) {
++ list_del(pos);
++ kfree(tmp);
++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
++ return;
++ }
++ }
++ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
++
++} /* kerSysDeregisterDyingGaspHandler */
++
++//EXPORT_SYMBOL(kerSysNvRamGet);
++EXPORT_SYMBOL(kerSysGetMacAddress);
++EXPORT_SYMBOL(kerSysReleaseMacAddress);
++EXPORT_SYMBOL(kerSysGetSdramSize);
++EXPORT_SYMBOL(kerSysLedCtrl);
++EXPORT_SYMBOL(kerSysGetResetHold);
++EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
++EXPORT_SYMBOL(BpGetBoardIds);
++EXPORT_SYMBOL(BpGetSdramSize);
++EXPORT_SYMBOL(BpGetPsiSize);
++EXPORT_SYMBOL(BpGetEthernetMacInfo);
++EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
++EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
++EXPORT_SYMBOL(BpGetVoipResetGpio);
++EXPORT_SYMBOL(BpGetVoipIntrGpio);
++EXPORT_SYMBOL(BpGetPcmciaResetGpio);
++EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
++EXPORT_SYMBOL(BpGetAdslLedGpio);
++EXPORT_SYMBOL(BpGetAdslFailLedGpio);
++EXPORT_SYMBOL(BpGetWirelessLedGpio);
++EXPORT_SYMBOL(BpGetUsbLedGpio);
++EXPORT_SYMBOL(BpGetHpnaLedGpio);
++EXPORT_SYMBOL(BpGetWanDataLedGpio);
++EXPORT_SYMBOL(BpGetPppLedGpio);
++EXPORT_SYMBOL(BpGetPppFailLedGpio);
++EXPORT_SYMBOL(BpGetVoipLedGpio);
++EXPORT_SYMBOL(BpGetWirelessExtIntr);
++EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
++EXPORT_SYMBOL(BpGetVoipExtIntr);
++EXPORT_SYMBOL(BpGetHpnaExtIntr);
++EXPORT_SYMBOL(BpGetHpnaChipSelect);
++EXPORT_SYMBOL(BpGetVoipChipSelect);
++EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
++EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
++EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
++EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
++EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
++EXPORT_SYMBOL(kerSysGetCycleCount);
++EXPORT_SYMBOL(kerSysSetWdTimer);
++EXPORT_SYMBOL(kerSysWakeupMonitorTask);
++
+diff -urN linux.old/arch/mips/bcm963xx/boardparms.c linux.dev/arch/mips/bcm963xx/boardparms.c
+--- linux.old/arch/mips/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,2391 @@
++/*
++<:copyright-gpl
++
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++
++:>
++*/
++/**************************************************************************
++ * File Name : boardparms.c
++ *
++ * Description: This file contains the implementation for the BCM63xx board
++ * parameter access functions.
++ *
++ * Updates : 07/14/2003 Created.
++ ***************************************************************************/
++
++/* Includes. */
++#include "boardparms.h"
++
++/* Defines. */
++
++/* Default psi size in K bytes */
++#define BP_PSI_DEFAULT_SIZE 24
++
++/* Typedefs */
++typedef struct boardparameters
++{
++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
++ unsigned short usSdramSize; /* SDRAM size and type */
++ unsigned short usPsiSize; /* persistent storage in K bytes */
++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
++ unsigned short usGpioUartRts; /* GPIO pin or not defined */
++ unsigned short usGpioUartCts; /* GPIO pin or not defined */
++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */
++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */
++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */
++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */
++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */
++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
++ unsigned short usExtIntrWireless; /* ext intr or not defined */
++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
++ unsigned short usExtIntrHpna; /* ext intr or not defined */
++ unsigned short usCsHpna; /* chip select not defined */
++ unsigned short usAntInUseWireless; /* antenna in use or not defined */
++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
++} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
++
++/* Variables */
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++static BOARD_PARAMETERS g_bcm96338sv =
++{
++ "96338SV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_NOT_DEFINED, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
++ BP_NOT_DEFINED, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++static BOARD_PARAMETERS g_bcm96338l2m8m =
++{
++ "96338L-2M-8M", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
++#endif
++
++#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
++static BOARD_PARAMETERS g_bcm96345r =
++{
++ "96345R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345gw2 =
++{
++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
++ * Reset or RTS.
++ */
++ "96345GW2", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_GPIO_0_AH, /* usGpioPhySpiSck */
++ BP_GPIO_4_AH, /* usGpioPhySpiSs */
++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */
++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_GPIO, /* usConfigType */
++ BP_ENET_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_1, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_15_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_GPIO_2_AH, /* usGpioPcmciaReset */
++ BP_GPIO_13_AH, /* usGpioUartRts */
++ BP_GPIO_9_AH, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_GPIO_7_AH, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_EXT_INTR_2, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345gw =
++{
++ "96345GW", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_1, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_15_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_GPIO_2_AH, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_GPIO_10_AH, /* usGpioLedWireless */
++ BP_GPIO_7_AH, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_EXT_INTR_2, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_EXT_INTR_3, /* usExtIntrHpna */
++ BP_CS_1, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96335r =
++{
++ "96335R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_9_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_9_AH, /* usGpioLedWanData */
++ BP_GPIO_8_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_9_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345r0 =
++{
++ "96345R0", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_9_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345rs =
++{
++ "96345RS", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
++ &g_bcm96345rs, 0};
++#endif
++
++#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
++
++static BOARD_PARAMETERS g_bcm96348r =
++{
++ "96348R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348lv =
++{
++ "96348LV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
++ 0x02, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_GPIO_5_AL, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348gw =
++{
++ "96348GW", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcm96348gw_10 =
++{
++ "96348GW-10", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348gw_11 =
++{
++ "96348GW-11", /* szBoardId */
++ {{BP_ENET_NO_PHY}, /* ucPhyType */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348sv =
++{
++ "96348SV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
++ 0x1f, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_NOT_DEFINED, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
++ BP_NOT_DEFINED, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
++{
++ "96348GW-DualDSP", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_UNEQUIPPED, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_DSP, /* ucDspType */
++ 0x01, /* ucDspAddress */
++ BP_EXT_INTR_3, /* usExtIntrVoip */
++ BP_UNEQUIPPED , /* usGpioVoipReset */
++ BP_GPIO_35_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_3}}, /* usCsVoip */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcmCustom_01 =
++{
++ "BCMCUST_01", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_36_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AL, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
++ &g_bcmCustom_01, 0};
++#endif
++
++static PBOARD_PARAMETERS g_pCurrentBp = 0;
++
++/**************************************************************************
++ * Name : bpstrcmp
++ *
++ * Description: String compare for this file so it does not depend on an OS.
++ * (Linux kernel and CFE share this source file.)
++ *
++ * Parameters : [IN] dest - destination string
++ * [IN] src - source string
++ *
++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
++ ***************************************************************************/
++static int bpstrcmp(const char *dest,const char *src);
++static int bpstrcmp(const char *dest,const char *src)
++{
++ while (*src && *dest)
++ {
++ if (*dest < *src) return -1;
++ if (*dest > *src) return 1;
++ dest++;
++ src++;
++ }
++
++ if (*dest && !*src) return 1;
++ if (!*dest && *src) return -1;
++ return 0;
++} /* bpstrcmp */
++
++/**************************************************************************
++ * Name : BpGetVoipDspConfig
++ *
++ * Description: Gets the DSP configuration from the board parameter
++ * structure for a given DSP index.
++ *
++ * Parameters : [IN] dspNum - DSP index (number)
++ *
++ * Returns : Pointer to DSP configuration block if found/valid, NULL
++ * otherwise.
++ ***************************************************************************/
++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
++{
++ VOIP_DSP_INFO *pDspConfig = 0;
++ int i;
++
++ if( g_pCurrentBp )
++ {
++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
++ {
++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
++ {
++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
++ break;
++ }
++ }
++ }
++
++ return pDspConfig;
++}
++
++
++/**************************************************************************
++ * Name : BpSetBoardId
++ *
++ * Description: This function find the BOARD_PARAMETERS structure for the
++ * specified board id string and assigns it to a global, static
++ * variable.
++ *
++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
++ * have a board parameters configuration record.
++ ***************************************************************************/
++int BpSetBoardId( char *pszBoardId )
++{
++ int nRet = BP_BOARD_ID_NOT_FOUND;
++ PBOARD_PARAMETERS *ppBp;
++
++ for( ppBp = g_BoardParms; *ppBp; ppBp++ )
++ {
++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
++ {
++ g_pCurrentBp = *ppBp;
++ nRet = BP_SUCCESS;
++ break;
++ }
++ }
++
++ return( nRet );
++} /* BpSetBoardId */
++
++/**************************************************************************
++ * Name : BpGetBoardIds
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
++ * boundary.
++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
++ * were allocated in pszBoardIds.
++ *
++ * Returns : Number of board id strings returned.
++ ***************************************************************************/
++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
++{
++ PBOARD_PARAMETERS *ppBp;
++ int i;
++ char *src;
++ char *dest;
++
++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
++ {
++ dest = pszBoardIds;
++ src = (*ppBp)->szBoardId;
++ while( *src )
++ *dest++ = *src++;
++ *dest = '\0';
++ }
++
++ return( i );
++} /* BpGetBoardIds */
++
++/**************************************************************************
++ * Name : BpGetEthernetMacInfo
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
++ * buffers.
++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
++ * are pointed to by pEnetInfos.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
++{
++ int i, nRet;
++
++ if( g_pCurrentBp )
++ {
++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
++ {
++ if( i < BP_MAX_ENET_MACS )
++ {
++ unsigned char *src = (unsigned char *)
++ &g_pCurrentBp->EnetMacInfos[i];
++ unsigned char *dest = (unsigned char *) pEnetInfos;
++ int len = sizeof(ETHERNET_MAC_INFO);
++ while( len-- )
++ *dest++ = *src++;
++ }
++ else
++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
++ }
++
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
++
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetEthernetMacInfo */
++
++/**************************************************************************
++ * Name : BpGetSdramSize
++ *
++ * Description: This function returns a constant that describees the board's
++ * SDRAM type and size.
++ *
++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
++ * is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetSdramSize( unsigned long *pulSdramSize )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulSdramSize = g_pCurrentBp->usSdramSize;
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ *pulSdramSize = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetSdramSize */
++
++/**************************************************************************
++ * Name : BpGetPsiSize
++ *
++ * Description: This function returns the persistent storage size in K bytes.
++ *
++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
++ * storage size is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetPsiSize( unsigned long *pulPsiSize )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulPsiSize = g_pCurrentBp->usPsiSize;
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ *pulPsiSize = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPsiSize */
++
++/**************************************************************************
++ * Name : BpGetRj11InnerOuterPairGpios
++ *
++ * Description: This function returns the GPIO pin assignments for changing
++ * between the RJ11 inner pair and RJ11 outer pair.
++ *
++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
++ * GPIO pin is returned in.
++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
++ unsigned short *pusOuter )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
++
++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusInner = *pusOuter = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetRj11InnerOuterPairGpios */
++
++/**************************************************************************
++ * Name : BpGetPressAndHoldResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the press
++ * and hold reset button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the press and hold
++ * reset button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
++
++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPressAndHoldResetGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioVoipReset;
++
++ if( *pusValue != BP_NOT_DEFINED ||
++ *pusValue == BP_UNEQUIPPED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipResetGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipIntrGpio
++ *
++ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioVoipIntr;
++
++ if( *pusValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipIntrGpio */
++
++/**************************************************************************
++ * Name : BpGetPcmciaResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PCMCIA
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPcmciaResetGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioPcmciaReset;
++
++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPcmciaResetGpio */
++
++/**************************************************************************
++ * Name : BpGetUartRtsCtsGpios
++ *
++ * Description: This function returns the GPIO pin assignments for RTS and CTS
++ * UART signals.
++ *
++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
++ * pin is returned in.
++ * [OUT] pusCts - Address of short word that the UART CTS GPIO
++ * pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusRts = g_pCurrentBp->usGpioUartRts;
++ *pusCts = g_pCurrentBp->usGpioUartCts;
++
++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusRts = *pusCts = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetUartRtsCtsGpios */
++
++/**************************************************************************
++ * Name : BpGetAdslLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedAdsl;
++
++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslLedGpio */
++
++/**************************************************************************
++ * Name : BpGetAdslFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED that is used when there is a DSL connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslFailLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedAdslFail;
++
++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslFailLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedWireless;
++
++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessAntInUse
++ *
++ * Description: This function returns the antennas in use for wireless
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
++ * is in use.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessAntInUse( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usAntInUseWireless;
++
++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessAntInUse */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesBtnGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
++
++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessSesBtnGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesExtIntr
++ *
++ * Description: This function returns the external interrupt number for the
++ * Wireless Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * external interrup is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesExtIntr( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
++
++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++
++} /* BpGetWirelessSesExtIntr */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Led.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Led GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedSesWireless;
++
++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++
++} /* BpGetWirelessSesLedGpio */
++
++/**************************************************************************
++ * Name : BpGetUsbLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the USB
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the USB LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetUsbLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedUsb;
++
++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetUsbLedGpio */
++
++/**************************************************************************
++ * Name : BpGetHpnaLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the HPNA
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedHpna;
++
++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWanDataLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the WAN Data
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWanDataLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedWanData;
++
++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWanDataLedGpio */
++
++/**************************************************************************
++ * Name : BpGetPppLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedPpp;
++
++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPppLedGpio */
++
++/**************************************************************************
++ * Name : BpGetPppFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED that is used when there is a PPP connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppFailLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedPppFail;
++
++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPppFailLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderPowerOnLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the power
++ * on LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
++
++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderPowerOn */
++
++/**************************************************************************
++ * Name : BpGetBootloaderAlarmLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the alarm
++ * LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
++
++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderAlarmLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderResetCfgLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the reset
++ * configuration LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the reset
++ * configuration LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
++
++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderResetCfgLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderStopLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the break
++ * into bootloader LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the break into
++ * bootloader LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlStop;
++
++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderStopLedGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ *
++ * Note : The VoIP structure would allow for having one LED per DSP
++ * however, the board initialization function assumes only one
++ * LED per functionality (ie one LED for VoIP). Therefore in
++ * order to keep this tidy and simple we do not make usage of the
++ * one-LED-per-DSP function. Instead, we assume that the LED for
++ * VoIP is unique and associated with DSP 0 (always present on
++ * any VoIP platform). If changing this to a LED-per-DSP function
++ * then one need to update the board initialization driver in
++ * bcmdrivers\opensource\char\board\bcm963xx\impl1
++ ***************************************************************************/
++int BpGetVoipLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioLedVoip;
++
++ if( *pusValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessExtIntr
++ *
++ * Description: This function returns the Wireless external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the wireless
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrWireless;
++
++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessExtIntr */
++
++/**************************************************************************
++ * Name : BpGetAdslDyingGaspExtIntr
++ *
++ * Description: This function returns the ADSL Dying Gasp external interrupt
++ * number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
++
++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslDyingGaspExtIntr */
++
++/**************************************************************************
++ * Name : BpGetVoipExtIntr
++ *
++ * Description: This function returns the VOIP external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * external interrupt number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pulValue = pDspInfo->usExtIntrVoip;
++
++ if( *pulValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipExtIntr */
++
++/**************************************************************************
++ * Name : BpGetHpnaExtIntr
++ *
++ * Description: This function returns the HPNA external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrHpna;
++
++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaExtIntr */
++
++/**************************************************************************
++ * Name : BpGetHpnaChipSelect
++ *
++ * Description: This function returns the HPNA chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * chip select number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaChipSelect( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usCsHpna;
++
++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaChipSelect */
++
++/**************************************************************************
++ * Name : BpGetVoipChipSelect
++ *
++ * Description: This function returns the VOIP chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * chip select number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pulValue = pDspInfo->usCsVoip;
++
++ if( *pulValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipChipSelect */
++
+diff -urN linux.old/arch/mips/bcm963xx/boardparms.h linux.dev/arch/mips/bcm963xx/boardparms.h
+--- linux.old/arch/mips/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,758 @@
++/*
++<:copyright-gpl
++
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++
++:>
++*/
++/**************************************************************************
++ * File Name : boardparms.h
++ *
++ * Description: This file contains definitions and function prototypes for
++ * the BCM63xx board parameter access functions.
++ *
++ * Updates : 07/14/2003 Created.
++ ***************************************************************************/
++
++#if !defined(_BOARDPARMS_H)
++#define _BOARDPARMS_H
++
++/* Return codes. */
++#define BP_SUCCESS 0
++#define BP_BOARD_ID_NOT_FOUND 1
++#define BP_VALUE_NOT_DEFINED 2
++#define BP_BOARD_ID_NOT_SET 3
++
++/* Values for BpGetSdramSize. */
++#define BP_MEMORY_8MB_1_CHIP 0
++#define BP_MEMORY_16MB_1_CHIP 1
++#define BP_MEMORY_32MB_1_CHIP 2
++#define BP_MEMORY_64MB_2_CHIP 3
++#define BP_MEMORY_32MB_2_CHIP 4
++#define BP_MEMORY_16MB_2_CHIP 5
++
++/* Values for EthernetMacInfo PhyType. */
++#define BP_ENET_NO_PHY 0
++#define BP_ENET_INTERNAL_PHY 1
++#define BP_ENET_EXTERNAL_PHY 2
++#define BP_ENET_EXTERNAL_SWITCH 3
++
++/* Values for EthernetMacInfo Configuration type. */
++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
++
++/* Values for EthernetMacInfo Reverse MII. */
++#define BP_ENET_NO_REVERSE_MII 0
++#define BP_ENET_REVERSE_MII 1
++
++/* Values for VoIPDSPInfo DSPType. */
++#define BP_VOIP_NO_DSP 0
++#define BP_VOIP_DSP 1
++
++
++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
++#define BP_ACTIVE_MASK 0x8000
++#define BP_ACTIVE_HIGH 0x0000
++#define BP_ACTIVE_LOW 0x8000
++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
++
++/* Values for external interrupt assignments. */
++#define BP_EXT_INTR_0 0
++#define BP_EXT_INTR_1 1
++#define BP_EXT_INTR_2 2
++#define BP_EXT_INTR_3 3
++
++/* Values for chip select assignments. */
++#define BP_CS_0 0
++#define BP_CS_1 1
++#define BP_CS_2 2
++#define BP_CS_3 3
++
++/* Value for GPIO and external interrupt fields that are not used. */
++#define BP_NOT_DEFINED 0xffff
++#define BP_HW_DEFINED 0xfff0
++#define BP_UNEQUIPPED 0xfff1
++
++/* Maximum size of the board id string. */
++#define BP_BOARD_ID_LEN 16
++
++/* Maximum number of Ethernet MACs. */
++#define BP_MAX_ENET_MACS 2
++
++/* Maximum number of VoIP DSPs. */
++#define BP_MAX_VOIP_DSP 2
++
++/* Wireless Antenna Settings. */
++#define BP_WLAN_ANT_MAIN 0
++#define BP_WLAN_ANT_AUX 1
++#define BP_WLAN_ANT_BOTH 3
++
++#if !defined(__ASSEMBLER__)
++
++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
++ * then the other fields are not valid.
++ */
++typedef struct EthernetMacInfo
++{
++ unsigned char ucPhyType; /* BP_ENET_xxx */
++ unsigned char ucPhyAddress; /* 0 to 31 */
++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
++ unsigned short numSwitchPorts; /* Number of PHY ports */
++ unsigned short usConfigType; /* Configuration type */
++ unsigned short usReverseMii; /* Reverse MII */
++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
++
++
++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
++ * then the other fields are not valid.
++ */
++typedef struct VoIPDspInfo
++{
++ unsigned char ucDspType;
++ unsigned char ucDspAddress;
++ unsigned short usExtIntrVoip;
++ unsigned short usGpioVoipReset;
++ unsigned short usGpioVoipIntr;
++ unsigned short usGpioLedVoip;
++ unsigned short usCsVoip;
++
++} VOIP_DSP_INFO;
++
++
++/**************************************************************************
++ * Name : BpSetBoardId
++ *
++ * Description: This function find the BOARD_PARAMETERS structure for the
++ * specified board id string and assigns it to a global, static
++ * variable.
++ *
++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
++ * have a board parameters configuration record.
++ ***************************************************************************/
++int BpSetBoardId( char *pszBoardId );
++
++/**************************************************************************
++ * Name : BpGetBoardIds
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
++ * boundary.
++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
++ * were allocated in pszBoardIds.
++ *
++ * Returns : Number of board id strings returned.
++ ***************************************************************************/
++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
++
++/**************************************************************************
++ * Name : BpGetEthernetMacInfo
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
++ * buffers.
++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
++ * are pointed to by pEnetInfos.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
++
++/**************************************************************************
++ * Name : BpGetSdramSize
++ *
++ * Description: This function returns a constant that describees the board's
++ * SDRAM type and size.
++ *
++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
++ * is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetSdramSize( unsigned long *pulSdramSize );
++
++/**************************************************************************
++ * Name : BpGetPsiSize
++ *
++ * Description: This function returns the persistent storage size in K bytes.
++ *
++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
++ * storage size is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetPsiSize( unsigned long *pulPsiSize );
++
++/**************************************************************************
++ * Name : BpGetRj11InnerOuterPairGpios
++ *
++ * Description: This function returns the GPIO pin assignments for changing
++ * between the RJ11 inner pair and RJ11 outer pair.
++ *
++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
++ * GPIO pin is returned in.
++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
++ unsigned short *pusOuter );
++
++/**************************************************************************
++ * Name : BpGetPressAndHoldResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the press
++ * and hold reset button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the press and hold
++ * reset button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipIntrGpio
++ *
++ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPcmciaResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PCMCIA
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPcmciaResetGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetUartRtsCtsGpios
++ *
++ * Description: This function returns the GPIO pin assignments for RTS and CTS
++ * UART signals.
++ *
++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
++ * pin is returned in.
++ * [OUT] pusCts - Address of short word that the UART CTS GPIO
++ * pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
++
++/**************************************************************************
++ * Name : BpGetAdslLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetAdslFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED that is used when there is a DSL connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslFailLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessAntInUse
++ *
++ * Description: This function returns the antennas in use for wireless
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
++ * is in use.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessAntInUse( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesBtnGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesExtIntr
++ *
++ * Description: This function returns the external interrupt number for the
++ * Wireless Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * external interrup is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesExtIntr( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Led.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Led GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetUsbLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the USB
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the USB LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetUsbLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the HPNA
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWanDataLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the WAN Data
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWanDataLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPppLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPppFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED that is used when there is a PPP connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppFailLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderPowerOnLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the power
++ * on LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderAlarmLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the alarm
++ * LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderResetCfgLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the reset
++ * configuration LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the reset
++ * configuration LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderStopLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the break
++ * into bootloader LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the break into
++ * bootloader LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessExtIntr
++ *
++ * Description: This function returns the Wireless external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the wireless
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetAdslDyingGaspExtIntr
++ *
++ * Description: This function returns the ADSL Dying Gasp external interrupt
++ * number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetVoipExtIntr
++ *
++ * Description: This function returns the VOIP external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * external interrupt number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaExtIntr
++ *
++ * Description: This function returns the HPNA external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaChipSelect
++ *
++ * Description: This function returns the HPNA chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * chip select number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaChipSelect( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetVoipChipSelect
++ *
++ * Description: This function returns the VOIP chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * chip select number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
++
++#endif /* __ASSEMBLER__ */
++
++#endif /* _BOARDPARMS_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6338_intr.h linux.dev/arch/mips/bcm963xx/include/6338_intr.h
+--- linux.old/arch/mips/bcm963xx/include/6338_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6338_intr.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,64 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6338_INTR_H
++#define __6338_INTR_H
++
++/*=====================================================================*/
++/* BCM6338 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6338 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6)
++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7)
++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10)
++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11)
++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12)
++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13)
++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
++#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17)
++
++#endif /* __BCM6338_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6338_map_part.h linux.dev/arch/mips/bcm963xx/include/6338_map_part.h
+--- linux.old/arch/mips/bcm963xx/include/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6338_map_part.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,334 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6338_MAP_H
++#define __BCM6338_MAP_H
++
++#include "bcmtypes.h"
++
++#define PERF_BASE 0xfffe0000
++#define TIMR_BASE 0xfffe0200
++#define UART_BASE 0xfffe0300
++#define GPIO_BASE 0xfffe0400
++#define SPI_BASE 0xfffe0c00
++
++typedef struct PerfControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define EMAC_CLK_EN 0x0010
++#define USBS_CLK_EN 0x0010
++#define SAR_CLK_EN 0x0020
++
++#define SPI_CLK_EN 0x0200
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 5
++#define EI_CLEAR_SHFT 10
++#define EI_MASK_SHFT 15
++#define EI_INSENS_SHFT 20
++#define EI_LEVEL_SHFT 25
++
++ uint32 unused[4]; /* (18) */
++ uint32 BlockSoftReset; /* (28) */
++#define BSR_SPI 0x00000001
++#define BSR_EMAC 0x00000004
++#define BSR_USBH 0x00000008
++#define BSR_USBS 0x00000010
++#define BSR_ADSL 0x00000020
++#define BSR_DMAMEM 0x00000040
++#define BSR_SAR 0x00000080
++#define BSR_ACLC 0x00000100
++#define BSR_ADSL_MIPS_PLL 0x00000400
++#define BSR_ALL_BLOCKS \
++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
++} PerfControl;
++
++#define PERF ((volatile PerfControl * const) PERF_BASE)
++
++
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint32 unused0;
++ uint32 GPIODir; /* bits 7:0 */
++ uint32 unused1;
++ uint32 GPIOio; /* bits 7:0 */
++ uint32 LEDCtrl;
++#define LED3_STROBE 0x08000000
++#define LED2_STROBE 0x04000000
++#define LED1_STROBE 0x02000000
++#define LED0_STROBE 0x01000000
++#define LED_TEST 0x00010000
++#define LED3_DISABLE_LINK_ACT 0x00008000
++#define LED2_DISABLE_LINK_ACT 0x00004000
++#define LED1_DISABLE_LINK_ACT 0x00002000
++#define LED0_DISABLE_LINK_ACT 0x00001000
++#define LED_INTERVAL_SET_MASK 0x00000f00
++#define LED_INTERVAL_SET_320MS 0x00000500
++#define LED_INTERVAL_SET_160MS 0x00000400
++#define LED_INTERVAL_SET_80MS 0x00000300
++#define LED_INTERVAL_SET_40MS 0x00000200
++#define LED_INTERVAL_SET_20MS 0x00000100
++#define LED3_ON 0x00000080
++#define LED2_ON 0x00000040
++#define LED1_ON 0x00000020
++#define LED0_ON 0x00000010
++#define LED3_ENABLE 0x00000008
++#define LED2_ENABLE 0x00000004
++#define LED1_ENABLE 0x00000002
++#define LED0_ENABLE 0x00000001
++ uint32 SpiSlaveCfg;
++#define SPI_SLAVE_RESET 0x00010000
++#define SPI_RESTRICT 0x00000400
++#define SPI_DELAY_DISABLE 0x00000200
++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
++#define SPI_SER_ADDR_CFG_MASK 0x0000000c
++#define SPI_MODE 0x00000001
++ uint32 vRegConfig;
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++/* Number to mask conversion macro used for GPIODir and GPIOio */
++#define GPIO_NUM_MAX_BITS_MASK 0x0f
++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
++
++/*
++** Spi Controller
++*/
++
++typedef struct SpiControl {
++ uint16 spiCmd; /* (0x0): SPI command */
++#define SPI_CMD_START_IMMEDIATE 3
++
++#define SPI_CMD_COMMAND_SHIFT 0
++#define SPI_CMD_DEVICE_ID_SHIFT 4
++#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
++
++ byte spiIntStatus; /* (0x2): SPI interrupt status */
++ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
++
++ byte spiIntMask; /* (0x4): SPI interrupt mask */
++#define SPI_INTR_CMD_DONE 0x01
++#define SPI_INTR_CLEAR_ALL 0x1f
++
++ byte spiStatus; /* (0x5): SPI status */
++
++ byte spiClkCfg; /* (0x6): SPI clock configuration */
++
++ byte spiFillByte; /* (0x7): SPI fill byte */
++
++ byte unused0;
++ byte spiMsgTail; /* (0x9): msgtail */
++ byte unused1;
++ byte spiRxTail; /* (0xB): rxtail */
++
++ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
++
++ byte spiMsgCtl; /* (0x40) control byte */
++#define HALF_DUPLEX_W 1
++#define HALF_DUPLEX_R 2
++#define SPI_MSG_TYPE_SHIFT 6
++#define SPI_BYTE_CNT_SHIFT 0
++ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
++ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
++ byte unused3[64]; /* (0xc0 - 0xff) reserved */
++} SpiControl;
++
++#define SPI ((volatile SpiControl * const) SPI_BASE)
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct MpiRegisters {
++ EbiChipSelect cs[1]; /* size chip select configuration */
++} MpiRegisters;
++
++#define MPI ((volatile MpiRegisters * const) MPI_BASE)
++
++
++#endif
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6345_intr.h linux.dev/arch/mips/bcm963xx/include/6345_intr.h
+--- linux.old/arch/mips/bcm963xx/include/6345_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6345_intr.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,72 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6345_INTR_H
++#define __6345_INTR_H
++
++
++/*=====================================================================*/
++/* BCM6345 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6345 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13)
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++/* Internal peripheral interrupt IDs */
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12)
++
++/* DMA channel interrupt IDs */
++#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
++#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
++#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
++#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
++#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
++#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
++#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
++#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
++#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
++#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
++#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
++#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
++
++
++#endif /* __BCM6345_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6345_map_part.h linux.dev/arch/mips/bcm963xx/include/6345_map_part.h
+--- linux.old/arch/mips/bcm963xx/include/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6345_map_part.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,163 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6345_MAP_H
++#define __BCM6345_MAP_H
++
++
++#include "bcmtypes.h"
++#include "6345_intr.h"
++
++typedef struct IntControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define USB_CLK_EN 0x0100
++#define EMAC_CLK_EN 0x0080
++#define UART_CLK_EN 0x0008
++#define CPU_CLK_EN 0x0001
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 4
++#define EI_CLEAR_SHFT 8
++#define EI_MASK_SHFT 12
++#define EI_INSENS_SHFT 16
++#define EI_LEVEL_SHFT 20
++} IntControl;
++
++#define INTC_BASE 0xfffe0000
++#define PERF ((volatile IntControl * const) INTC_BASE)
++
++#define TIMR_BASE 0xfffe0200
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++ byte config;
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define XMITBREAK 0x40
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ uint32 baudword;
++
++ byte txf_levl;
++ byte rxf_levl;
++ byte fifocfg;
++ byte prog_out;
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense;
++ byte DeltaIPConfig_Mask;
++ byte DeltaIP_SyncIP;
++ uint16 intMask;
++ uint16 intStatus;
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOEMT 0x0020
++#define RXOVFERR 0x0080
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data;
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART_BASE 0xfffe0300
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint16 unused0;
++ byte unused1;
++ byte TBusSel;
++
++ uint16 unused2;
++ uint16 GPIODir;
++ byte unused3;
++ byte Leds;
++ uint16 GPIOio;
++
++ uint32 UartCtl;
++} GpioControl;
++
++#define GPIO_BASE 0xfffe0400
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++#define GPIO_NUM_MAX_BITS_MASK 0x0f
++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
++
++
++#endif
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6348_intr.h linux.dev/arch/mips/bcm963xx/include/6348_intr.h
+--- linux.old/arch/mips/bcm963xx/include/6348_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6348_intr.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,74 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6348_INTR_H
++#define __6348_INTR_H
++
++
++/*=====================================================================*/
++/* BCM6348 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6348 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6)
++#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7)
++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
++#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10)
++#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11)
++#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12)
++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13)
++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17)
++#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18)
++#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19)
++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20)
++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21)
++#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22)
++#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23)
++#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24)
++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25)
++
++
++#endif /* __BCM6348_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6348_map_part.h linux.dev/arch/mips/bcm963xx/include/6348_map_part.h
+--- linux.old/arch/mips/bcm963xx/include/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6348_map_part.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,500 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6348_MAP_H
++#define __BCM6348_MAP_H
++
++#include "bcmtypes.h"
++
++#define PERF_BASE 0xfffe0000
++#define TIMR_BASE 0xfffe0200
++#define UART_BASE 0xfffe0300
++#define GPIO_BASE 0xfffe0400
++#define MPI_BASE 0xfffe2000 /* MPI control registers */
++#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
++#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */
++
++typedef struct PerfControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define EMAC_CLK_EN 0x0010
++#define SAR_CLK_EN 0x0020
++#define USBS_CLK_EN 0x0040
++#define USBH_CLK_EN 0x0100
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 5
++#define EI_CLEAR_SHFT 10
++#define EI_MASK_SHFT 15
++#define EI_INSENS_SHFT 20
++#define EI_LEVEL_SHFT 25
++
++ uint32 unused[4]; /* (18) */
++ uint32 BlockSoftReset; /* (28) */
++#define BSR_SPI 0x00000001
++#define BSR_EMAC 0x00000004
++#define BSR_USBH 0x00000008
++#define BSR_USBS 0x00000010
++#define BSR_ADSL 0x00000020
++#define BSR_DMAMEM 0x00000040
++#define BSR_SAR 0x00000080
++#define BSR_ACLC 0x00000100
++#define BSR_ADSL_MIPS_PLL 0x00000400
++#define BSR_ALL_BLOCKS \
++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
++ uint32 unused2[2]; /* (2c) */
++ uint32 PllStrap; /* (34) */
++#define PLL_N1_SHFT 20
++#define PLL_N1_MASK (7<<PLL_N1_SHFT)
++#define PLL_N2_SHFT 15
++#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
++#define PLL_M1_REF_SHFT 12
++#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
++#define PLL_M2_REF_SHFT 9
++#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
++#define PLL_M1_CPU_SHFT 6
++#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
++#define PLL_M1_BUS_SHFT 3
++#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
++#define PLL_M2_BUS_SHFT 0
++#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
++} PerfControl;
++
++#define PERF ((volatile PerfControl * const) PERF_BASE)
++
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint32 GPIODir_high; /* bits 36:32 */
++ uint32 GPIODir; /* bits 31:00 */
++ uint32 GPIOio_high; /* bits 36:32 */
++ uint32 GPIOio; /* bits 31:00 */
++ uint32 LEDCtrl;
++#define LED3_STROBE 0x08000000
++#define LED2_STROBE 0x04000000
++#define LED1_STROBE 0x02000000
++#define LED0_STROBE 0x01000000
++#define LED_TEST 0x00010000
++#define LED3_DISABLE_LINK_ACT 0x00008000
++#define LED2_DISABLE_LINK_ACT 0x00004000
++#define LED1_DISABLE_LINK_ACT 0x00002000
++#define LED0_DISABLE_LINK_ACT 0x00001000
++#define LED_INTERVAL_SET_MASK 0x00000f00
++#define LED_INTERVAL_SET_320MS 0x00000500
++#define LED_INTERVAL_SET_160MS 0x00000400
++#define LED_INTERVAL_SET_80MS 0x00000300
++#define LED_INTERVAL_SET_40MS 0x00000200
++#define LED_INTERVAL_SET_20MS 0x00000100
++#define LED3_ON 0x00000080
++#define LED2_ON 0x00000040
++#define LED1_ON 0x00000020
++#define LED0_ON 0x00000010
++#define LED3_ENABLE 0x00000008
++#define LED2_ENABLE 0x00000004
++#define LED1_ENABLE 0x00000002
++#define LED0_ENABLE 0x00000001
++ uint32 SpiSlaveCfg;
++#define SPI_SLAVE_RESET 0x00010000
++#define SPI_RESTRICT 0x00000400
++#define SPI_DELAY_DISABLE 0x00000200
++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
++#define SPI_SER_ADDR_CFG_MASK 0x0000000c
++#define SPI_MODE 0x00000001
++ uint32 GPIOMode;
++#define GROUP4_DIAG 0x00090000
++#define GROUP4_UTOPIA 0x00080000
++#define GROUP4_LEGACY_LED 0x00030000
++#define GROUP4_MII_SNOOP 0x00020000
++#define GROUP4_EXT_EPHY 0x00010000
++#define GROUP3_DIAG 0x00009000
++#define GROUP3_UTOPIA 0x00008000
++#define GROUP3_EXT_MII 0x00007000
++#define GROUP2_DIAG 0x00000900
++#define GROUP2_PCI 0x00000500
++#define GROUP1_DIAG 0x00000090
++#define GROUP1_UTOPIA 0x00000080
++#define GROUP1_SPI_UART 0x00000060
++#define GROUP1_SPI_MASTER 0x00000060
++#define GROUP1_MII_PCCARD 0x00000040
++#define GROUP1_MII_SNOOP 0x00000020
++#define GROUP1_EXT_EPHY 0x00000010
++#define GROUP0_DIAG 0x00000009
++#define GROUP0_EXT_MII 0x00000007
++
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++/* Number to mask conversion macro used for GPIODir and GPIOio */
++#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
++#define GPIO_NUM_MAX_BITS_MASK 0x1f
++#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
++
++/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
++#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
++#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
++
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct MpiRegisters {
++ EbiChipSelect cs[7]; /* size chip select configuration */
++#define EBI_CS0_BASE 0
++#define EBI_CS1_BASE 1
++#define EBI_CS2_BASE 2
++#define EBI_CS3_BASE 3
++#define PCMCIA_COMMON_BASE 4
++#define PCMCIA_ATTRIBUTE_BASE 5
++#define PCMCIA_IO_BASE 6
++ uint32 unused0[2]; /* reserved */
++ uint32 ebi_control; /* ebi control */
++ uint32 unused1[4]; /* reserved */
++#define EBI_ACCESS_TIMEOUT 0x000007FF
++ uint32 pcmcia_cntl1; /* pcmcia control 1 */
++#define PCCARD_CARD_RESET 0x00040000
++#define CARDBUS_ENABLE 0x00008000
++#define PCMCIA_ENABLE 0x00004000
++#define PCMCIA_GPIO_ENABLE 0x00002000
++#define CARDBUS_IDSEL 0x00001F00
++#define VS2_OEN 0x00000080
++#define VS1_OEN 0x00000040
++#define VS2_OUT 0x00000020
++#define VS1_OUT 0x00000010
++#define VS2_IN 0x00000008
++#define VS1_IN 0x00000004
++#define CD2_IN 0x00000002
++#define CD1_IN 0x00000001
++#define VS_MASK 0x0000000C
++#define CD_MASK 0x00000003
++ uint32 unused2; /* reserved */
++ uint32 pcmcia_cntl2; /* pcmcia control 2 */
++#define PCMCIA_BYTESWAP_DIS 0x00000002
++#define PCMCIA_HALFWORD_EN 0x00000001
++#define RW_ACTIVE_CNT_BIT 2
++#define INACTIVE_CNT_BIT 8
++#define CE_SETUP_CNT_BIT 16
++#define CE_HOLD_CNT_BIT 24
++ uint32 unused3[40]; /* reserved */
++
++ uint32 sp0range; /* PCI to internal system bus address space */
++ uint32 sp0remap;
++ uint32 sp0cfg;
++ uint32 sp1range;
++ uint32 sp1remap;
++ uint32 sp1cfg;
++
++ uint32 EndianCfg;
++
++ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
++#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
++#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
++#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
++#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
++#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
++#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
++
++ uint32 l2pmrange1; /* internal system bus to PCI memory space */
++#define PCI_SIZE_64K 0xFFFF0000
++#define PCI_SIZE_128K 0xFFFE0000
++#define PCI_SIZE_256K 0xFFFC0000
++#define PCI_SIZE_512K 0xFFF80000
++#define PCI_SIZE_1M 0xFFF00000
++#define PCI_SIZE_2M 0xFFE00000
++#define PCI_SIZE_4M 0xFFC00000
++#define PCI_SIZE_8M 0xFF800000
++#define PCI_SIZE_16M 0xFF000000
++#define PCI_SIZE_32M 0xFE000000
++ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
++ uint32 l2pmremap1;
++#define CARDBUS_MEM 0x00000004
++#define MEM_WINDOW_EN 0x00000001
++ uint32 l2pmrange2;
++ uint32 l2pmbase2;
++ uint32 l2pmremap2;
++ uint32 l2piorange; /* internal system bus to PCI I/O space */
++ uint32 l2piobase;
++ uint32 l2pioremap;
++
++ uint32 pcimodesel;
++#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
++#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
++#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
++
++ uint32 pciintstat; /* PCI interrupt mask/status */
++#define MAILBOX1_SENT 0x08
++#define MAILBOX0_SENT 0x04
++#define MAILBOX1_MSG_RCV 0x02
++#define MAILBOX0_MSG_RCV 0x01
++ uint32 locbuscntrl; /* internal system bus control */
++#define DIR_U2P_NOSWAP 0x00000002
++#define EN_PCI_GPIO 0x00000001
++ uint32 locintstat; /* internal system bus interrupt mask/status */
++#define CSERR 0x0200
++#define SERR 0x0100
++#define EXT_PCI_INT 0x0080
++#define DIR_FAILED 0x0040
++#define DIR_COMPLETE 0x0020
++#define PCI_CFG 0x0010
++ uint32 unused5[7];
++
++ uint32 mailbox0;
++ uint32 mailbox1;
++
++ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
++#define PCI_CFG_REG_WRITE_EN 0x00000080
++#define PCI_CFG_ADDR 0x0000003C
++ uint32 pcicfgdata; /* internal system bus PCI configuration data */
++
++ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
++#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
++#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
++#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
++#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
++ uint32 locch2intStat;
++#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
++#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
++#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
++ uint32 locch2intMask;
++ uint32 unused6;
++ uint32 locch2descaddr;
++ uint32 locch2status1;
++#define LOCAL_DESC_STATE 0xE0000000
++#define PCI_DESC_STATE 0x1C000000
++#define BYTE_DONE 0x03FFC000
++#define RING_ADDR 0x00003FFF
++ uint32 locch2status2;
++#define BUFPTR_OFFSET 0x1FFF0000
++#define PCI_MASTER_STATE 0x000000C0
++#define LOC_MASTER_STATE 0x00000038
++#define CONTROL_STATE 0x00000007
++ uint32 unused7;
++
++ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
++#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
++#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
++ uint32 locch1intstat;
++ uint32 locch1intmask;
++ uint32 unused8;
++ uint32 locch1descaddr;
++ uint32 locch1status1;
++ uint32 locch1status2;
++ uint32 unused9;
++
++ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
++ uint32 pcich1intstat;
++ uint32 pcich1intmask;
++ uint32 pcich1descaddr;
++ uint32 pcich1status1;
++ uint32 pcich1status2;
++
++ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
++ uint32 pcich2intstat;
++ uint32 pcich2intmask;
++ uint32 pcich2descaddr;
++ uint32 pcich2status1;
++ uint32 pcich2status2;
++
++ uint32 perm_id; /* permanent device and vendor id */
++ uint32 perm_rev; /* permanent revision id */
++} MpiRegisters;
++
++#define MPI ((volatile MpiRegisters * const) MPI_BASE)
++
++/* PCI configuration address space start offset 0x40 */
++#define BRCM_PCI_CONFIG_TIMER 0x40
++#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
++#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
++
++/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
++#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */
++#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */
++
++#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
++
++#endif
++
+diff -urN linux.old/arch/mips/bcm963xx/include/bcm_intr.h linux.dev/arch/mips/bcm963xx/include/bcm_intr.h
+--- linux.old/arch/mips/bcm963xx/include/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcm_intr.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,59 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM_INTR_H
++#define __BCM_INTR_H
++
++#ifdef __cplusplus
++ extern "C" {
++#endif
++
++#if defined(CONFIG_BCM96338)
++#include <6338_intr.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_intr.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_intr.h>
++#endif
++
++/* defines */
++struct pt_regs;
++typedef int (*FN_HANDLER) (int, void *, struct pt_regs *);
++
++/* prototypes */
++extern void enable_brcm_irq(unsigned int irq);
++extern void disable_brcm_irq(unsigned int irq);
++extern int request_external_irq(unsigned int irq,
++ FN_HANDLER handler, unsigned long irqflags,
++ const char * devname, void *dev_id);
++extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
++ unsigned int interruptId);
++extern void dump_intr_regs(void);
++
++/* compatibility definitions */
++#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
++#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
++
++#ifdef __cplusplus
++ }
++#endif
++
++#endif
+diff -urN linux.old/arch/mips/bcm963xx/include/bcm_map_part.h linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h
+--- linux.old/arch/mips/bcm963xx/include/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,34 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM_MAP_PART_H
++#define __BCM_MAP_PART_H
++
++#if defined(CONFIG_BCM96338)
++#include <6338_map_part.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_map_part.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_map_part.h>
++#endif
++
++#endif
++
+diff -urN linux.old/arch/mips/bcm963xx/include/bcmpci.h linux.dev/arch/mips/bcm963xx/include/bcmpci.h
+--- linux.old/arch/mips/bcm963xx/include/bcmpci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcmpci.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,87 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++//
++// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
++//
++#ifndef BCMPCI_H
++#define BCMPCI_H
++
++/* Memory window in internal system bus address space */
++#define BCM_PCI_MEM_BASE 0x08000000
++/* IO window in internal system bus address space */
++#define BCM_PCI_IO_BASE 0x0C000000
++
++#define BCM_PCI_ADDR_MASK 0x1fffffff
++
++/* Memory window size (range) */
++#define BCM_PCI_MEM_SIZE_16MB 0x01000000
++/* IO window size (range) */
++#define BCM_PCI_IO_SIZE_64KB 0x00010000
++
++/* PCI Configuration and I/O space acesss */
++#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) )
++
++/* fake USB PCI slot */
++#define USB_HOST_SLOT 9
++#define USB_BAR0_MEM_SIZE 0x0800
++
++#define BCM_HOST_MEM_SPACE1 0x10000000
++#define BCM_HOST_MEM_SPACE2 0x00000000
++
++/*
++ * EBI bus clock is 33MHz and share with PCI bus
++ * each clock cycle is 30ns.
++ */
++/* attribute memory access wait cnt for 4306 */
++#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns
++#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns
++#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
++#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns
++
++/* common memory access wait cnt for 4306 */
++#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns
++#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns
++#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
++#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns
++
++#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also
++#define PCCARD_VCC_33V 0x00010000
++#define PCCARD_VCC_50V 0x00020000
++
++typedef enum {
++ MPI_CARDTYPE_NONE, // No Card in slot
++ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot
++ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot
++} CardType;
++
++#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus
++
++#define pcmciaAttrOffset 0x00200000
++#define pcmciaMemOffset 0x00000000
++// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA.
++#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000)
++// Base Address is that mapped into the MPI ChipSelect registers.
++// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
++#define pcmciaBase 0xbf000000
++#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase)
++#define pcmciaMem (pcmciaMemOffset | pcmciaBase)
++#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
++
++#endif
+diff -urN linux.old/arch/mips/bcm963xx/include/bcmTag.h linux.dev/arch/mips/bcm963xx/include/bcmTag.h
+--- linux.old/arch/mips/bcm963xx/include/bcmTag.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcmTag.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,153 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++//**************************************************************************************
++// File Name : bcmTag.h
++//
++// Description: add tag with validation system to the firmware image file to be uploaded
++// via http
++//
++// Created : 02/28/2002 seanl
++//**************************************************************************************
++
++#ifndef _BCMTAG_H_
++#define _BCMTAG_H_
++
++
++#define BCM_SIG_1 "Broadcom Corporation"
++#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
++
++#define BCM_TAG_VER "6"
++#define BCM_TAG_VER_LAST "26"
++
++// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
++#define TAG_LEN 256
++#define TAG_VER_LEN 4
++#define SIG_LEN 20
++#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
++#define CHIP_ID_LEN 6
++#define IMAGE_LEN 10
++#define ADDRESS_LEN 12
++#define FLAG_LEN 2
++#define TOKEN_LEN 20
++#define BOARD_ID_LEN 16
++#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
++ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
++
++
++// TAG for downloadable image (kernel plus file system)
++typedef struct _FILE_TAG
++{
++ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
++ unsigned char signiture_1[SIG_LEN]; // text line for company info
++ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
++ unsigned char chipId[CHIP_ID_LEN]; // chip id
++ unsigned char boardId[BOARD_ID_LEN]; // board id
++ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
++ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
++ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
++ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
++ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
++ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
++ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
++ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
++ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
++ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
++ unsigned char reserved[RESERVED_LEN]; // reserved for later use
++ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
++ // now will be 4 unsigned char crc
++ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
++} FILE_TAG, *PFILE_TAG;
++
++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
++#define CRC_LEN 4
++
++// only included if for bcmTag.exe program
++#ifdef BCMTAG_EXE_USE
++
++static unsigned long Crc32_table[256] = {
++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
++};
++#endif // BCMTAG_USE
++
++
++#endif // _BCMTAG_H_
++
+diff -urN linux.old/arch/mips/bcm963xx/include/bcmtypes.h linux.dev/arch/mips/bcm963xx/include/bcmtypes.h
+--- linux.old/arch/mips/bcm963xx/include/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcmtypes.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,163 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++//
++// bcmtypes.h - misc useful typedefs
++//
++#ifndef BCMTYPES_H
++#define BCMTYPES_H
++
++// These are also defined in typedefs.h in the application area, so I need to
++// protect against re-definition.
++
++#ifndef _TYPEDEFS_H_
++typedef unsigned char uint8;
++typedef unsigned short uint16;
++typedef unsigned long uint32;
++typedef signed char int8;
++typedef signed short int16;
++typedef signed long int32;
++#if !defined(__cplusplus)
++typedef int bool;
++#endif
++#endif
++
++typedef unsigned char byte;
++// typedef unsigned long sem_t;
++
++typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
++typedef signed long LONG,*PLONG;
++
++typedef unsigned int *PUINT;
++typedef signed int INT;
++
++typedef unsigned short *PUSHORT;
++typedef signed short SHORT,*PSHORT;
++typedef unsigned short WORD,*PWORD;
++
++typedef unsigned char *PUCHAR;
++typedef signed char *PCHAR;
++
++typedef void *PVOID;
++
++typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
++
++typedef unsigned char BYTE,*PBYTE;
++
++//#ifndef __GNUC__
++//The following has been defined in Vxworks internally: vxTypesOld.h
++//redefine under vxworks will cause error
++typedef signed int *PINT;
++
++typedef signed char INT8;
++typedef signed short INT16;
++typedef signed long INT32;
++
++typedef unsigned char UINT8;
++typedef unsigned short UINT16;
++typedef unsigned long UINT32;
++
++typedef unsigned char UCHAR;
++typedef unsigned short USHORT;
++typedef unsigned int UINT;
++typedef unsigned long ULONG;
++
++typedef void VOID;
++typedef unsigned char BOOL;
++
++//#endif /* __GNUC__ */
++
++
++// These are also defined in typedefs.h in the application area, so I need to
++// protect against re-definition.
++#ifndef TYPEDEFS_H
++
++// Maximum and minimum values for a signed 16 bit integer.
++#define MAX_INT16 32767
++#define MIN_INT16 -32768
++
++// Useful for true/false return values. This uses the
++// Taligent notation (k for constant).
++typedef enum
++{
++ kFalse = 0,
++ kTrue = 1
++} Bool;
++
++#endif
++
++/* macros to protect against unaligned accesses */
++
++#if 0
++/* first arg is an address, second is a value */
++#define PUT16( a, d ) { \
++ *((byte *)a) = (byte)((d)>>8); \
++ *(((byte *)a)+1) = (byte)(d); \
++}
++
++#define PUT32( a, d ) { \
++ *((byte *)a) = (byte)((d)>>24); \
++ *(((byte *)a)+1) = (byte)((d)>>16); \
++ *(((byte *)a)+2) = (byte)((d)>>8); \
++ *(((byte *)a)+3) = (byte)(d); \
++}
++
++/* first arg is an address, returns a value */
++#define GET16( a ) ( \
++ (*((byte *)a) << 8) | \
++ (*(((byte *)a)+1)) \
++)
++
++#define GET32( a ) ( \
++ (*((byte *)a) << 24) | \
++ (*(((byte *)a)+1) << 16) | \
++ (*(((byte *)a)+2) << 8) | \
++ (*(((byte *)a)+3)) \
++)
++#endif
++
++#ifndef YES
++#define YES 1
++#endif
++
++#ifndef NO
++#define NO 0
++#endif
++
++#ifndef IN
++#define IN
++#endif
++
++#ifndef OUT
++#define OUT
++#endif
++
++#ifndef TRUE
++#define TRUE 1
++#endif
++
++#ifndef FALSE
++#define FALSE 0
++#endif
++
++#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
++#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
++#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
++
++#endif
+diff -urN linux.old/arch/mips/bcm963xx/include/board.h linux.dev/arch/mips/bcm963xx/include/board.h
+--- linux.old/arch/mips/bcm963xx/include/board.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/board.h 2006-08-25 01:52:34.000000000 +0200
+@@ -0,0 +1,373 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: board.h */
++/* DATE: 97/02/18 */
++/* PURPOSE: Board specific information. This module should include */
++/* all base device addresses and board specific macros. */
++/* */
++/***********************************************************************/
++#ifndef _BOARD_H
++#define _BOARD_H
++
++/*****************************************************************************/
++/* Misc board definitions */
++/*****************************************************************************/
++
++#define DYING_GASP_API
++
++/*****************************************************************************/
++/* Physical Memory Map */
++/*****************************************************************************/
++
++#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */
++#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */
++
++/*****************************************************************************/
++/* Note that the addresses above are physical addresses and that programs */
++/* have to use converted addresses defined below: */
++/*****************************************************************************/
++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
++
++/*****************************************************************************/
++/* Select the PLL value to get the desired CPU clock frequency. */
++/* */
++/* */
++/*****************************************************************************/
++#define FPERIPH 50000000
++
++#define ONEK 1024
++#define BLK64K (64*ONEK)
++#define FLASH45_BLKS_BOOT_ROM 1
++#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K)
++#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/
++
++/*****************************************************************************/
++/* Note that the addresses above are physical addresses and that programs */
++/* have to use converted addresses defined below: */
++/*****************************************************************************/
++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
++
++/*****************************************************************************/
++/* Select the PLL value to get the desired CPU clock frequency. */
++/* */
++/* */
++/*****************************************************************************/
++#define FPERIPH 50000000
++
++#define SDRAM_TYPE_ADDRESS_OFFSET 16
++#define NVRAM_DATA_OFFSET 0x0580
++#define NVRAM_DATA_ID 0x0f1e2d3c
++#define BOARD_SDRAM_TYPE *(unsigned long *) \
++ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
++
++#define ONEK 1024
++#define BLK64K (64*ONEK)
++
++// nvram and psi flash definitions for 45
++#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram
++#define NVRAM_PSI_DEFAULT 24 // default psi in K byes
++
++/*****************************************************************************/
++/* NVRAM Offset and definition */
++/*****************************************************************************/
++
++#define NVRAM_VERSION_NUMBER 2
++#define NVRAM_VERSION_NUMBER_ADDRESS 0
++
++#define NVRAM_BOOTLINE_LEN 256
++#define NVRAM_BOARD_ID_STRING_LEN 16
++#define NVRAM_MAC_ADDRESS_LEN 6
++#define NVRAM_MAC_COUNT_MAX 32
++
++/*****************************************************************************/
++/* Misc Offsets */
++/*****************************************************************************/
++
++#define CFE_VERSION_OFFSET 0x0570
++#define CFE_VERSION_MARK_SIZE 5
++#define CFE_VERSION_SIZE 5
++
++typedef struct
++{
++ unsigned long ulVersion;
++ char szBootline[NVRAM_BOOTLINE_LEN];
++ char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
++ unsigned long ulReserved1[2];
++ unsigned long ulNumMacAddrs;
++ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ char chReserved[2];
++ unsigned long ulCheckSum;
++} NVRAM_DATA, *PNVRAM_DATA;
++
++
++/*****************************************************************************/
++/* board ioctl calls for flash, led and some other utilities */
++/*****************************************************************************/
++
++
++/* Defines. for board driver */
++#define BOARD_IOCTL_MAGIC 'B'
++#define BOARD_DRV_MAJOR 206
++
++#define MAC_ADDRESS_ANY (unsigned long) -1
++
++#define BOARD_IOCTL_FLASH_INIT \
++ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_FLASH_WRITE \
++ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_FLASH_READ \
++ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_NR_PAGES \
++ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_DUMP_ADDR \
++ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_MEMORY \
++ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_MIPS_SOFT_RESET \
++ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_LED_CTRL \
++ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_ID \
++ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_PSI_SIZE \
++ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_SDRAM_SIZE \
++ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_MONITOR_FD \
++ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
++ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_BOOTLINE \
++ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_BOOTLINE \
++ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_CHIP_ID \
++ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_NUM_ENET \
++ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_CFE_VER \
++ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_ENET_CFG \
++ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
++ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_SES_LED \
++ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
++
++//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
++#define RESET_BUTTON_UP 1
++#define RESET_BUTTON_PRESSDOWN 0
++#define BOARD_IOCTL_GET_RESETHOLD \
++ _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
++//>>JUNHON, 2004/09/15
++
++// for the action in BOARD_IOCTL_PARMS for flash operation
++typedef enum
++{
++ PERSISTENT,
++ NVRAM,
++ BCM_IMAGE_CFE,
++ BCM_IMAGE_FS,
++ BCM_IMAGE_KERNEL,
++ BCM_IMAGE_WHOLE,
++ SCRATCH_PAD,
++ FLASH_SIZE,
++} BOARD_IOCTL_ACTION;
++
++
++typedef struct boardIoctParms
++{
++ char *string;
++ char *buf;
++ int strLen;
++ int offset;
++ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */
++ int result;
++} BOARD_IOCTL_PARMS;
++
++
++// LED defines
++typedef enum
++{
++ kLedAdsl,
++ kLedWireless,
++ kLedUsb,
++ kLedHpna,
++ kLedWanData,
++ kLedPPP,
++ kLedVoip,
++ kLedSes,
++ kLedLan,
++ kLedSelfTest,
++ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end.
++} BOARD_LED_NAME;
++
++typedef enum
++{
++ kLedStateOff, /* turn led off */
++ kLedStateOn, /* turn led on */
++ kLedStateFail, /* turn led on red */
++ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */
++ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */
++ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */
++} BOARD_LED_STATE;
++
++
++// virtual and physical map pair defined in board.c
++typedef struct ledmappair
++{
++ BOARD_LED_NAME ledName; // virtual led name
++ BOARD_LED_STATE ledInitState; // initial led state when the board boots.
++ unsigned short ledMask; // physical GPIO pin mask
++ unsigned short ledActiveLow; // reset bit to turn on LED
++ unsigned short ledMaskFail; // physical GPIO pin mask for state failure
++ unsigned short ledActiveLowFail;// reset bit to turn on LED
++} LED_MAP_PAIR, *PLED_MAP_PAIR;
++
++typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
++
++/* Flash storage address information that is determined by the flash driver. */
++typedef struct flashaddrinfo
++{
++ int flash_persistent_start_blk;
++ int flash_persistent_number_blk;
++ int flash_persistent_length;
++ unsigned long flash_persistent_blk_offset;
++ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN)
++ int flash_scratch_pad_number_blk;
++ int flash_scratch_pad_length;
++ unsigned long flash_scratch_pad_blk_offset;
++ int flash_nvram_start_blk;
++ int flash_nvram_number_blk;
++ int flash_nvram_length;
++ unsigned long flash_nvram_blk_offset;
++} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
++
++// scratch pad defines
++/* SP - Persisten Scratch Pad format:
++ sp header : 32 bytes
++ tokenId-1 : 8 bytes
++ tokenId-1 len : 4 bytes
++ tokenId-1 data
++ ....
++ tokenId-n : 8 bytes
++ tokenId-n len : 4 bytes
++ tokenId-n data
++*/
++
++#define MAGIC_NUM_LEN 8
++#define MAGIC_NUMBER "gOGoBrCm"
++#define TOKEN_NAME_LEN 16
++#define SP_VERSION 1
++#define SP_MAX_LEN 8 * 1024 // 8k buf before psi
++#define SP_RESERVERD 16
++
++typedef struct _SP_HEADER
++{
++ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number
++ int SPVersion; // version number
++ int SPUsedLen; // used sp len
++ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes
++} SP_HEADER, *PSP_HEADER;
++
++typedef struct _TOKEN_DEF
++{
++ char tokenName[TOKEN_NAME_LEN];
++ int tokenLen;
++} SP_TOKEN, *PSP_TOKEN;
++
++
++/*****************************************************************************/
++/* Function Prototypes */
++/*****************************************************************************/
++#if !defined(__ASM_ASM_H)
++void dumpaddr( unsigned char *pAddr, int nLen );
++
++int kerSysNvRamGet(char *string, int strLen, int offset);
++int kerSysNvRamSet(char *string, int strLen, int offset);
++int kerSysPersistentGet(char *string, int strLen, int offset);
++int kerSysPersistentSet(char *string, int strLen, int offset);
++int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
++int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
++int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
++int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
++int kerSysReleaseMacAddress( unsigned char *pucaAddr );
++int kerSysGetSdramSize( void );
++void kerSysGetBootline(char *string, int strLen);
++void kerSysSetBootline(char *string, int strLen);
++void kerSysMipsSoftReset(void);
++void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
++void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
++int kerSysFlashSizeGet(void);
++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
++void kerSysDeregisterDyingGaspHandler(char *devname);
++void kerSysWakeupMonitorTask( void );
++#endif
++
++#define BOOT_CFE 0
++#define BOOT_REDBOOT 1
++
++extern int boot_loader_type;
++
++#endif /* _BOARD_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/int-handler.S linux.dev/arch/mips/bcm963xx/int-handler.S
+--- linux.old/arch/mips/bcm963xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/int-handler.S 2006-08-25 02:13:33.000000000 +0200
+@@ -0,0 +1,59 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Generic interrupt handler for Broadcom MIPS boards
++ */
++
++#include <linux/config.h>
++
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/*
++ * MIPS IRQ Source
++ * -------- ------
++ * 0 Software (ignored)
++ * 1 Software (ignored)
++ * 2 Combined hardware interrupt (hw0)
++ * 3 Hardware
++ * 4 Hardware
++ * 5 Hardware
++ * 6 Hardware
++ * 7 R4k timer
++ */
++
++ .text
++ .set noreorder
++ .set noat
++ .align 5
++ NESTED(brcmIRQ, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set noreorder
++ .set at
++
++ jal plat_irq_dispatch
++ move a0, sp
++
++ j ret_from_irq
++ nop
++
++ END(brcmIRQ)
+diff -urN linux.old/arch/mips/bcm963xx/irq.c linux.dev/arch/mips/bcm963xx/irq.c
+--- linux.old/arch/mips/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/irq.c 2006-08-25 03:54:34.000000000 +0200
+@@ -0,0 +1,256 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Interrupt control functions for Broadcom 963xx MIPS boards
++ */
++
++#include <asm/atomic.h>
++
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++
++#include <asm/irq.h>
++#include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/signal.h>
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++static void irq_dispatch_int(struct pt_regs *regs)
++{
++ unsigned int pendingIrqs;
++ static unsigned int irqBit;
++ static unsigned int isrNumber = 31;
++
++ pendingIrqs = PERF->IrqStatus & PERF->IrqMask;
++ if (!pendingIrqs) {
++ return;
++ }
++
++ while (1) {
++ irqBit <<= 1;
++ isrNumber++;
++ if (isrNumber == 32) {
++ isrNumber = 0;
++ irqBit = 0x1;
++ }
++ if (pendingIrqs & irqBit) {
++ PERF->IrqMask &= ~irqBit; // mask
++ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs);
++ break;
++ }
++ }
++}
++
++static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs)
++{
++ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) {
++ printk("**** Ext IRQ mask. Should not dispatch ****\n");
++ }
++ /* disable and clear interrupt in the controller */
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ do_IRQ(irq, regs);
++}
++
++
++extern void brcm_timer_interrupt(struct pt_regs *regs);
++
++asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
++{
++ u32 cause;
++ while((cause = (read_c0_cause()& CAUSEF_IP))) {
++ if (cause & CAUSEF_IP7)
++ brcm_timer_interrupt(regs);
++ else if (cause & CAUSEF_IP2)
++ irq_dispatch_int(regs);
++ else if (cause & CAUSEF_IP3)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs);
++ else if (cause & CAUSEF_IP4)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs);
++ else if (cause & CAUSEF_IP5)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs);
++ else if (cause & CAUSEF_IP6)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs);
++ local_irq_disable();
++ }
++}
++
++
++void enable_brcm_irq(unsigned int irq)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
++ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
++ }
++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
++ /* enable and clear interrupt in the controller */
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ }
++ local_irq_restore(flags);
++}
++
++void disable_brcm_irq(unsigned int irq)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
++ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
++ }
++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
++ /* disable interrupt in the controller */
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ }
++ local_irq_restore(flags);
++}
++
++void ack_brcm_irq(unsigned int irq)
++{
++ /* Already done in brcm_irq_dispatch */
++}
++
++unsigned int startup_brcm_irq(unsigned int irq)
++{
++ enable_brcm_irq(irq);
++
++ return 0; /* never anything pending */
++}
++
++unsigned int startup_brcm_none(unsigned int irq)
++{
++ return 0;
++}
++
++void end_brcm_irq(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++ enable_brcm_irq(irq);
++}
++
++void end_brcm_none(unsigned int irq)
++{
++}
++
++static struct hw_interrupt_type brcm_irq_type = {
++ .typename = "MIPS",
++ .startup = startup_brcm_irq,
++ .shutdown = disable_brcm_irq,
++ .enable = enable_brcm_irq,
++ .disable = disable_brcm_irq,
++ .ack = ack_brcm_irq,
++ .end = end_brcm_irq,
++ .set_affinity = NULL
++};
++
++static struct hw_interrupt_type brcm_irq_no_end_type = {
++ .typename = "MIPS",
++ .startup = startup_brcm_none,
++ .shutdown = disable_brcm_irq,
++ .enable = enable_brcm_irq,
++ .disable = disable_brcm_irq,
++ .ack = ack_brcm_irq,
++ .end = end_brcm_none,
++ .set_affinity = NULL
++};
++
++void __init arch_init_irq(void)
++{
++ int i;
++
++ clear_c0_status(ST0_BEV);
++ change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4));
++
++ for (i = 0; i < NR_IRQS; i++) {
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = 0;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &brcm_irq_type;
++ }
++}
++
++int request_external_irq(unsigned int irq,
++ FN_HANDLER handler,
++ unsigned long irqflags,
++ const char * devname,
++ void *dev_id)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level
++
++ local_irq_restore(flags);
++
++ return( request_irq(irq, handler, irqflags, devname, dev_id) );
++}
++
++/* VxWorks compatibility function(s). */
++
++unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param,
++ unsigned int interruptId)
++{
++ int nRet = -1;
++ char *devname;
++
++ devname = kmalloc(16, GFP_KERNEL);
++ if (devname)
++ sprintf( devname, "brcm_%d", interruptId );
++
++ /* Set the IRQ description to not automatically enable the interrupt at
++ * the end of an ISR. The driver that handles the interrupt must
++ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior
++ * is consistent with interrupt handling on VxWorks.
++ */
++ irq_desc[interruptId].handler = &brcm_irq_no_end_type;
++
++ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET )
++ {
++ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
++ devname, (void *) param );
++ }
++ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3)
++ {
++ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
++ devname, (void *) param );
++ }
++
++ return( nRet );
++}
++
++
++EXPORT_SYMBOL(enable_brcm_irq);
++EXPORT_SYMBOL(disable_brcm_irq);
++EXPORT_SYMBOL(request_external_irq);
++EXPORT_SYMBOL(BcmHalMapInterrupt);
++
+diff -urN linux.old/arch/mips/bcm963xx/Kconfig linux.dev/arch/mips/bcm963xx/Kconfig
+--- linux.old/arch/mips/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/Kconfig 2006-08-25 01:22:39.000000000 +0200
+@@ -0,0 +1,138 @@
++# Kernel and Driver configuration for Broadcom Commengine ADSL board
++choice
++ prompt "Broadcom Commengine ADSL board"
++ depends on MIPS_BRCM
++ default BCM96345
++ help
++ Select different Broadcom ADSL board
++
++config BCM96338
++ bool "96338 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++config BCM96345
++ bool "96345 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++config BCM96348
++ bool "96348 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++endchoice
++
++config BCM_BOARD
++ bool "Support for Broadcom Board"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SERIAL
++ bool "Support for Serial Port"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENET
++ tristate "Support for Ethernet"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_USB
++ tristate "Support for USB"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_WLAN
++ tristate "Support for Wireless"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PCI
++ bool "Support for PCI"
++ depends on BCM96338 || BCM96345 || BCM96348
++ select PCI
++
++config BCM_ATMAPI
++ tristate "Support for ATM"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMTEST
++ tristate "Support for ATM Diagnostic"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ADSL
++ tristate "Support for ADSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENDPOINT
++ tristate "Support for VOICE"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PROCFS
++ tristate "Support for PROCFS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_VDSL
++ tristate "Support for VDSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SECURITY
++ tristate "Support for SECURITY"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_HPNA
++ tristate "Support for HPNA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_BOARD_IMPL
++ int "Implementation index for ADSL Board"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SERIAL_IMPL
++ int "Implementation index for Serial"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENET_IMPL
++ int "Implementation index for Ethernet"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_USB_IMPL
++ int "Implementation index for USB"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_WLAN_IMPL
++ int "Implementation index for WIRELESS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMAPI_IMPL
++ int "Implementation index for ATM"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMTEST_IMPL
++ int "Implementation index for ATM Diagnostic"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_BLAA_IMPL
++ int "Implementation index for BLAA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ADSL_IMPL
++ int "Implementation index for ADSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENDPOINT_IMPL
++ int "Implementation index for VOICE"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PROCFS_IMPL
++ int "Implementation index for PROCFS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_VDSL_IMPL
++ int "Implementation index for VDSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SECURITY_IMPL
++ int "Implementation index for SECURITY"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_HPNA_IMPL
++ int "Implementation index for HPNA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
+diff -urN linux.old/arch/mips/bcm963xx/Makefile linux.dev/arch/mips/bcm963xx/Makefile
+--- linux.old/arch/mips/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/Makefile 2006-08-25 02:04:27.000000000 +0200
+@@ -0,0 +1,23 @@
++#
++# Makefile for generic Broadcom MIPS boards
++#
++# Copyright (C) 2004 Broadcom Corporation
++#
++obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o
++
++SRCBASE := $(TOPDIR)
++EXTRA_CFLAGS += -I$(SRCBASE)/include
++#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG
++EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH)
++
++
++ifeq "$(ADSL)" "ANNEX_B"
++EXTRA_CFLAGS += -DADSL_ANNEXB
++endif
++ifeq "$(ADSL)" "SADSL"
++EXTRA_CFLAGS += -DADSL_SADSL
++endif
++ifeq "$(ADSL)" "ANNEX_C"
++EXTRA_CFLAGS += -DADSL_ANNEXC
++endif
++
+diff -urN linux-2.6.17/arch/mips/bcm963xx/prom.c linux-2.6.17-brcm63xx/arch/mips/bcm963xx/prom.c
+--- linux-2.6.17/arch/mips/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-brcm63xx/arch/mips/bcm963xx/prom.c 2006-08-29 07:10:10.000000000 +0200
+@@ -0,0 +1,143 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * prom.c: PROM library initialization code.
++ *
++ */
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/sched.h>
++#include <linux/bootmem.h>
++#include <linux/blkdev.h>
++#include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <asm/cpu.h>
++#include <asm/time.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#include "boardparms.h"
++#include "softdsl/AdslCoreDefs.h"
++
++
++//char arcs_cmdline[CL_SIZE] __initdata = {0};
++/* inv_xde */
++int boot_loader_type;
++int prom_argc;
++char **prom_argv, **prom_envp;
++
++extern int do_syslog(int, char *, int);
++extern void serial_init(void);
++extern void __init InitNvramInfo( void );
++extern void kerSysFlashInit( void );
++extern unsigned long get_nvram_start_addr(void);
++void __init create_root_nfs_cmdline( char *cmdline );
++
++#define MACH_BCM MACH_BCM96348
++
++const char *get_system_type(void)
++{
++ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
++
++ return( pNvramData->szBoardId );*/
++ return "brcm63xx";
++}
++
++unsigned long getMemorySize(void)
++{
++ unsigned long ulSdramType = BOARD_SDRAM_TYPE;
++
++ unsigned long ulSdramSize;
++
++ switch( ulSdramType )
++ {
++ case BP_MEMORY_16MB_1_CHIP:
++ case BP_MEMORY_16MB_2_CHIP:
++ ulSdramSize = 16 * 1024 * 1024;
++ break;
++ case BP_MEMORY_32MB_1_CHIP:
++ case BP_MEMORY_32MB_2_CHIP:
++ ulSdramSize = 32 * 1024 * 1024;
++ break;
++ case BP_MEMORY_64MB_2_CHIP:
++ ulSdramSize = 64 * 1024 * 1024;
++ break;
++ default:
++ ulSdramSize = 8 * 1024 * 1024;
++ break;
++ }
++ if (boot_loader_type == BOOT_CFE)
++ return ulSdramSize;
++ else
++ // assume that there is one contiguous memory map
++ return boot_mem_map.map[0].size;
++}
++
++/* --------------------------------------------------------------------------
++ Name: prom_init
++ -------------------------------------------------------------------------- */
++void __init prom_init(void)
++{
++ extern ulong r4k_interval;
++
++ serial_init();
++
++ prom_argc = fw_arg0;
++ prom_argv = (char **) fw_arg1;
++ prom_envp = (char **) fw_arg2;
++
++ if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) {
++ strncpy(arcs_cmdline, prom_argv[1], CL_SIZE);
++ }
++
++ if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) {
++ boot_loader_type = BOOT_CFE;
++ }
++ else {
++ boot_loader_type = BOOT_REDBOOT;
++ }
++
++ do_syslog(8, NULL, 8);
++
++ printk( "%s prom init\n", get_system_type() );
++
++ PERF->IrqMask = 0;
++
++ arcs_cmdline[0] = '\0';
++
++ if (boot_loader_type == BOOT_CFE)
++ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
++ else
++ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
++
++ mips_machgroup = MACH_GROUP_BRCM;
++ mips_machtype = MACH_BCM;
++
++ BpSetBoardId("96348GW-10");
++}
++
++/* --------------------------------------------------------------------------
++ Name: prom_free_prom_memory
++Abstract:
++ -------------------------------------------------------------------------- */
++void __init prom_free_prom_memory(void)
++{
++
++}
++
+diff -urN linux.old/arch/mips/bcm963xx/ser_init.c linux.dev/arch/mips/bcm963xx/ser_init.c
+--- linux.old/arch/mips/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/ser_init.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,180 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Broadcom bcm63xx serial port initialization, also prepare for printk
++ * by registering with console_init
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/console.h>
++#include <linux/sched.h>
++
++#include <asm/addrspace.h>
++#include <asm/irq.h>
++#include <asm/reboot.h>
++#include <asm/gdb-stub.h>
++#include <asm/mc146818rtc.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++
++#define SER63XX_DEFAULT_BAUD 115200
++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
++#define stUart ((volatile Uart * const) UART_BASE)
++
++// Transmit interrupts
++#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR)
++// Receive interrupts
++#define RXINT (RXFIFONE | RXOVFERR)
++
++/* --------------------------------------------------------------------------
++ Name: serial_init
++ Purpose: Initalize the UART
++-------------------------------------------------------------------------- */
++void __init serial_init(void)
++{
++ UINT32 tmpVal = SER63XX_DEFAULT_BAUD;
++ ULONG clockFreqHz;
++
++#if defined(CONFIG_BCM96345)
++ // Make sure clock is ticking
++ PERF->blkEnables |= UART_CLK_EN;
++#endif
++
++ /* Dissable channel's receiver and transmitter. */
++ stUart->control &= ~(BRGEN|TXEN|RXEN);
++
++ /*--------------------------------------------------------------------*/
++ /* Write the table value to the clock select register. */
++ /* DPullen - this is the equation to use: */
++ /* value = clockFreqHz / baud / 32-1; */
++ /* (snmod) Actually you should also take into account any necessary */
++ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */
++ /* and subtract 1. If 1, just divide by 2 */
++ /*--------------------------------------------------------------------*/
++ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
++ tmpVal = (clockFreqHz / tmpVal) / 16;
++ if( tmpVal & 0x01 )
++ tmpVal /= 2; //Rounding up, so sub is already accounted for
++ else
++ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1
++ stUart->baudword = tmpVal;
++
++ /* Finally, re-enable the transmitter and receiver. */
++ stUart->control |= (BRGEN|TXEN|RXEN);
++
++ stUart->config = (BITS8SYM | ONESTOP);
++ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA;
++ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
++ stUart->intMask = 0;
++ stUart->intMask = RXINT | TXINT;
++}
++
++
++/* prom_putc()
++ * Output a character to the UART
++ */
++void prom_putc(char c)
++{
++ /* Wait for Tx uffer to empty */
++ while (! (READ16(stUart->intStatus) & TXFIFOEMT));
++ /* Send character */
++ stUart->Data = c;
++}
++
++/* prom_puts()
++ * Write a string to the UART
++ */
++void prom_puts(const char *s)
++{
++ while (*s) {
++ if (*s == '\n') {
++ prom_putc('\r');
++ }
++ prom_putc(*s++);
++ }
++}
++
++
++/* prom_getc_nowait()
++ * Returns a character from the UART
++ * Returns -1 if no characters available or corrupted
++ */
++int prom_getc_nowait(void)
++{
++ uint16 uStatus;
++ int cData = -1;
++
++ uStatus = READ16(stUart->intStatus);
++
++ if (uStatus & RXFIFONE) { /* Do we have a character? */
++ cData = READ16(stUart->Data) & 0xff; /* Read character */
++ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */
++ cData = -1;
++ }
++ }
++
++ return cData;
++}
++
++/* prom_getc()
++ * Returns a charcter from the serial port
++ * Will block until it receives a valid character
++*/
++char prom_getc(void)
++{
++ int cData = -1;
++
++ /* Loop until we get a valid character */
++ while(cData == -1) {
++ cData = prom_getc_nowait();
++ }
++ return (char) cData;
++}
++
++/* prom_testc()
++ * Returns 0 if no characters available
++ */
++int prom_testc(void)
++{
++ uint16 uStatus;
++
++ uStatus = READ16(stUart->intStatus);
++
++ return (uStatus & RXFIFONE);
++}
++
++#if defined (CONFIG_REMOTE_DEBUG)
++/* Prevent other code from writing to the serial port */
++void _putc(char c) { }
++void _puts(const char *ptr) { }
++#else
++/* Low level outputs call prom routines */
++void _putc(char c) {
++ prom_putc(c);
++}
++void _puts(const char *ptr) {
++ prom_puts(ptr);
++}
++#endif
+diff -urN linux.old/arch/mips/bcm963xx/setup.c linux.dev/arch/mips/bcm963xx/setup.c
+--- linux.old/arch/mips/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/setup.c 2006-08-25 02:26:58.000000000 +0200
+@@ -0,0 +1,525 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Generic setup routines for Broadcom 963xx MIPS boards
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/kdev_t.h>
++#include <linux/types.h>
++#include <linux/console.h>
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/pm.h>
++
++#include <asm/addrspace.h>
++#include <asm/bcache.h>
++#include <asm/irq.h>
++#include <asm/time.h>
++#include <asm/reboot.h>
++#include <asm/gdb-stub.h>
++
++extern void brcm_time_init(void);
++extern void brcm_timer_setup(struct irqaction *irq);
++extern unsigned long getMemorySize(void);
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <bcm_map_part.h>
++#include <bcmpci.h>
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++#endif
++
++/* This function should be in a board specific directory. For now,
++ * assume that all boards that include this file use a Broadcom chip
++ * with a soft reset bit in the PLL control register.
++ */
++static void brcm_machine_restart(char *command)
++{
++ const unsigned long ulSoftReset = 0x00000001;
++ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
++ *pulPllCtrl |= ulSoftReset;
++}
++
++static void brcm_machine_halt(void)
++{
++ printk("System halted\n");
++ while (1);
++}
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++
++static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value)
++{
++ /* write index then value */
++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
++ mpi->pcicfgdata = value;
++}
++
++static uint32 mpi_GetLocalPciConfigReg(uint32 reg)
++{
++ /* write index then get value */
++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
++ return mpi->pcicfgdata;
++}
++
++/*
++ * mpi_ResetPcCard: Set/Reset the PcCard
++ */
++static void mpi_ResetPcCard(int cardtype, BOOL bReset)
++{
++ if (cardtype == MPI_CARDTYPE_NONE) {
++ return;
++ }
++
++ if (cardtype == MPI_CARDTYPE_CARDBUS) {
++ bReset = ! bReset;
++ }
++
++ if (bReset) {
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
++ } else {
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET);
++ }
++}
++
++/*
++ * mpi_ConfigCs: Configure an MPI/EBI chip select
++ */
++static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags)
++{
++ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size);
++ mpi->cs[cs].config = flags;
++}
++
++/*
++ * mpi_InitPcmciaSpace
++ */
++static void mpi_InitPcmciaSpace(void)
++{
++ // ChipSelect 4 controls PCMCIA Memory accesses
++ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
++ // ChipSelect 5 controls PCMCIA Attribute accesses
++ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
++ // ChipSelect 6 controls PCMCIA I/O accesses
++ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE));
++
++ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) |
++ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) |
++ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) |
++ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT));
++
++ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS);
++}
++
++/*
++ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection
++ *
++ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc
++ * CCD1# CCD2# CVS1 CVS2 Type
++ *
++ * GND GND open open 16-bit 5 vdc
++ *
++ * GND GND GND open 16-bit 3.3 vdc
++ *
++ * GND GND open GND 16-bit x.x vdc
++ *
++ * GND GND GND GND 16-bit 3.3 & x.x vdc
++ *
++ *====================================================================
++ *
++ * CVS1 GND CCD1# open CardBus 3.3 vdc
++ *
++ * GND CVS2 open CCD2# CardBus x.x vdc
++ *
++ * GND CVS1 CCD2# open CardBus y.y vdc
++ *
++ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc
++ *
++ * CVS2 GND open CCD1# CardBus x.x & y.y vdc
++ *
++ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc
++ *
++ */
++static int cardtype_vcc_detect(void)
++{
++ uint32 data32;
++ int cardtype;
++
++ cardtype = MPI_CARDTYPE_NONE;
++ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive
++ // the CVS pins to 0.
++ data32 = mpi->pcmcia_cntl1;
++ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in.
++ {
++ case 0x00000003: // No Card is in the slot.
++ printk("mpi: No Card is in the PCMCIA slot\n");
++ break;
++
++ case 0x00000002: // Partial insertion, No CD2#.
++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n");
++ break;
++
++ case 0x00000001: // Partial insertion, No CD1#.
++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n");
++ break;
++
++ case 0x00000000:
++ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and
++ // float the CVS pins.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ // Read the Register.
++ switch (data32 & 0x0000000C) // See what is on the CVS pins.
++ {
++ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option.
++ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n");
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ break;
++
++ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground.
++ // 2 valid voltage options.
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid.
++ printk("mpi: Unknown card plugged into slot\n");
++ } else { // CCD2 is tied to CVS1.
++ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n");
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ }
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n");
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ break;
++ }
++ break;
++
++ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground.
++ // 2 valid voltage options.
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid.
++ printk("mpi: Unknown card plugged into slot\n");
++ } else {// CCD2 is tied to CVS2.
++ printk("mpi: Detected 3.3 and x.x Cardbus card\n");
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ }
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n");
++ break;
++ }
++ break;
++
++ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2.
++ // 5 valid voltage options.
++
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ // CCD1 is tied to ground.
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1.
++ printk("mpi: Detected y.y vdc Cardbus card\n");
++ } else { // CCD2 is tied to CVS2.
++ printk("mpi: Detected x.x vdc Cardbus card\n");
++ }
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // CCD2 is tied to ground.
++
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000001) {// CCD1 is tied to CVS1.
++ printk("mpi: Detected 3.3 vdc Cardbus card\n");
++ } else { // CCD1 is tied to CVS2.
++ printk("mpi: Detected x.x and y.y Cardbus card\n");
++ }
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n");
++ break;
++ }
++ break;
++
++ default:
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ }
++ }
++ return cardtype;
++}
++
++/*
++ * mpi_DetectPcCard: Detect the plugged in PC-Card
++ * Return: < 0 => Unknown card detected
++ * 0 => No card detected
++ * 1 => 16-bit card detected
++ * 2 => 32-bit CardBus card detected
++ */
++static int mpi_DetectPcCard(void)
++{
++ int cardtype;
++
++ cardtype = cardtype_vcc_detect();
++ switch(cardtype) {
++ case MPI_CARDTYPE_PCMCIA:
++ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits
++ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
++ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE);
++ mpi_InitPcmciaSpace();
++ mpi_ResetPcCard(cardtype, FALSE);
++ // Hold card in reset for 10ms
++ mdelay(10);
++ mpi_ResetPcCard(cardtype, TRUE);
++ // Let card come out of reset
++ mdelay(100);
++ break;
++ case MPI_CARDTYPE_CARDBUS:
++ // 8 => CardBus Enable
++ // 1 => PCI Slot Number
++ // C => Float VS1 & VS2
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) |
++ CARDBUS_ENABLE |
++ (CARDBUS_SLOT << 8)|
++ VS2_OEN |
++ VS1_OEN;
++ /* access to this memory window will be to/from CardBus */
++ mpi->l2pmremap1 |= CARDBUS_MEM;
++
++ // Need to reset the Cardbus Card. There's no CardManager to do this,
++ // and we need to be ready for PCI configuration.
++ mpi_ResetPcCard(cardtype, FALSE);
++ // Hold card in reset for 10ms
++ mdelay(10);
++ mpi_ResetPcCard(cardtype, TRUE);
++ // Let card come out of reset
++ mdelay(100);
++ break;
++ default:
++ break;
++ }
++ return cardtype;
++}
++
++static int mpi_init(void)
++{
++ unsigned long data;
++ unsigned int chipid;
++ unsigned int chiprev;
++ unsigned int sdramsize;
++
++ chipid = (PERF->RevID & 0xFFFF0000) >> 16;
++ chiprev = (PERF->RevID & 0xFF);
++ sdramsize = getMemorySize();
++ /*
++ * Init the pci interface
++ */
++ data = GPIO->GPIOMode; // GPIO mode register
++ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
++ GPIO->GPIOMode = data; // PCI internal arbiter
++
++ /*
++ * In the BCM6348 CardBus support is defaulted to Slot 0
++ * because there is no external IDSEL for CardBus. To disable
++ * the CardBus and allow a standard PCI card in Slot 0
++ * set the cbus_idsel field to 0x1f.
++ */
++ /*
++ uData = mpi->pcmcia_cntl1;
++ uData |= CARDBUS_IDSEL;
++ mpi->pcmcia_cntl1 = uData;
++ */
++ // Setup PCI I/O Window range. Give 64K to PCI I/O
++ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1);
++ // UBUS to PCI I/O base address
++ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI I/O Window remap
++ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN);
++
++ // enable PCI related GPIO pins and data swap between system and PCI bus
++ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP);
++
++ /* Enable 6348 BusMaster and Memory access mode */
++ data = mpi_GetLocalPciConfigReg(PCI_COMMAND);
++ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
++ mpi_SetLocalPciConfigReg(PCI_COMMAND, data);
++
++ /* Configure two 16 MByte PCI to System memory regions. */
++ /* These memory regions are used when PCI device is a bus master */
++ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */
++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1);
++ mpi->sp0remap = 0x0;
++
++ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */
++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2);
++ mpi->sp1remap = 0x0;
++ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40);
++
++ if ((chipid == 0x6348) && (chiprev == 0xb0)) {
++ mpi->sp0range = ~(sdramsize-1);
++ mpi->sp1range = ~(sdramsize-1);
++ }
++ /*
++ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity
++ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in
++ * first read.
++ */
++ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER);
++ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK;
++ data |= 0x00000080;
++ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data);
++
++ /* enable pci interrupt */
++ mpi->locintstat |= (EXT_PCI_INT << 16);
++
++ mpi_DetectPcCard();
++
++ ioport_resource.start = BCM_PCI_IO_BASE;
++ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB;
++
++#if defined(CONFIG_USB)
++ PERF->blkEnables |= USBH_CLK_EN;
++ mdelay(100);
++ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP;
++#endif
++
++ return 0;
++}
++#endif
++
++static int __init brcm63xx_setup(void)
++{
++ extern int panic_timeout;
++
++ _machine_restart = brcm_machine_restart;
++ _machine_halt = brcm_machine_halt;
++ pm_power_off = brcm_machine_halt;
++
++ board_time_init = brcm_time_init;
++ board_timer_setup = brcm_timer_setup;
++
++ panic_timeout = 5;
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++ /* mpi initialization */
++ mpi_init();
++#endif
++ return 0;
++}
++
++void plat_setup(void)
++{
++ brcm63xx_setup();
++}
++
++/***************************************************************************
++ * C++ New and delete operator functions
++ ***************************************************************************/
++
++/* void *operator new(unsigned int sz) */
++void *_Znwj(unsigned int sz)
++{
++ return( kmalloc(sz, GFP_KERNEL) );
++}
++
++/* void *operator new[](unsigned int sz)*/
++void *_Znaj(unsigned int sz)
++{
++ return( kmalloc(sz, GFP_KERNEL) );
++}
++
++/* placement new operator */
++/* void *operator new (unsigned int size, void *ptr) */
++void *ZnwjPv(unsigned int size, void *ptr)
++{
++ return ptr;
++}
++
++/* void operator delete(void *m) */
++void _ZdlPv(void *m)
++{
++ kfree(m);
++}
++
++/* void operator delete[](void *m) */
++void _ZdaPv(void *m)
++{
++ kfree(m);
++}
++
++EXPORT_SYMBOL(_Znwj);
++EXPORT_SYMBOL(_Znaj);
++EXPORT_SYMBOL(ZnwjPv);
++EXPORT_SYMBOL(_ZdlPv);
++EXPORT_SYMBOL(_ZdaPv);
++
+diff -urN linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h
+--- linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,2 @@
++#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
++
+diff -urN linux.old/arch/mips/bcm963xx/time.c linux.dev/arch/mips/bcm963xx/time.c
+--- linux.old/arch/mips/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/time.c 2006-08-25 03:58:22.000000000 +0200
+@@ -0,0 +1,114 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Setup time for Broadcom 963xx MIPS boards
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel_stat.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/time.h>
++#include <linux/timex.h>
++
++#include <asm/mipsregs.h>
++#include <asm/ptrace.h>
++#include <asm/div64.h>
++#include <asm/time.h>
++
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++static unsigned long r4k_offset; /* Amount to increment compare reg each time */
++static unsigned long r4k_cur; /* What counter should be at next timer irq */
++
++/* *********************************************************************
++ * calculateCpuSpeed()
++ * Calculate the BCM6348 CPU speed by reading the PLL strap register
++ * and applying the following formula:
++ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1)
++ * Input parameters:
++ * none
++ * Return value:
++ * none
++ ********************************************************************* */
++
++static inline unsigned long __init calculateCpuSpeed(void)
++{
++ UINT32 pllStrap = PERF->PllStrap;
++ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
++ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
++ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
++
++ return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000;
++}
++
++
++static inline unsigned long __init cal_r4koff(void)
++{
++ mips_hpt_frequency = calculateCpuSpeed() / 2;
++ return (mips_hpt_frequency / HZ);
++}
++
++
++/*
++ * There are a lot of conceptually broken versions of the MIPS timer interrupt
++ * handler floating around. This one is rather different, but the algorithm
++ * is provably more robust.
++ */
++irqreturn_t brcm_timer_interrupt(struct pt_regs *regs)
++{
++ int irq = MIPS_TIMER_INT;
++
++ irq_enter();
++ kstat_this_cpu.irqs[irq]++;
++
++ timer_interrupt(irq, NULL, regs);
++ irq_exit();
++ return IRQ_HANDLED;
++}
++
++
++void __init brcm_time_init(void)
++{
++ unsigned int est_freq, flags;
++ local_irq_save(flags);
++
++ printk("calculating r4koff... ");
++ r4k_offset = cal_r4koff();
++ printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset);
++
++ est_freq = 2 * r4k_offset * HZ;
++ est_freq += 5000; /* round */
++ est_freq -= est_freq % 10000;
++ printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000,
++ (est_freq % 1000000) * 100 / 1000000);
++ local_irq_restore(flags);
++}
++
++
++void __init brcm_timer_setup(struct irqaction *irq)
++{
++ r4k_cur = (read_c0_count() + r4k_offset);
++ write_c0_compare(r4k_cur);
++ set_c0_status(IE_IRQ5);
++}
+diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
+--- linux.old/arch/mips/Kconfig 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/Kconfig 2006-08-25 01:57:46.000000000 +0200
+@@ -12,6 +12,15 @@
+ prompt "System type"
+ default SGI_IP22
+
++config MIPS_BRCM
++ bool "Support for the Broadcom boards"
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_HAS_CPU_MIPS32_R1
++ select IRQ_CPU
++ help
++ This is a fmaily of boards based on the Broadcom MIPS32
++
+ config MIPS_MTX1
+ bool "4G Systems MTX-1 board"
+ select DMA_NONCOHERENT
+@@ -780,6 +789,7 @@
+
+ endchoice
+
++source "arch/mips/bcm963xx/Kconfig"
+ source "arch/mips/ddb5xxx/Kconfig"
+ source "arch/mips/gt64120/ev64120/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
+--- linux.old/arch/mips/kernel/cpu-probe.c 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-08-25 00:39:38.000000000 +0200
+@@ -568,6 +568,25 @@
+ return;
+ }
+
++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
++{
++ decode_configs(c);
++ switch (c->processor_id & 0xff00) {
++ case PRID_IMP_BCM6338:
++ c->cputype = CPU_BCM6338;
++ break;
++ case PRID_IMP_BCM6345:
++ c->cputype = CPU_BCM6345;
++ break;
++ case PRID_IMP_BCM6348:
++ c->cputype = CPU_BCM6348;
++ break;
++ default:
++ c->cputype = CPU_UNKNOWN;
++ break;
++ }
++}
++
+ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
+ {
+ decode_configs(c);
+@@ -704,6 +723,9 @@
+ case PRID_COMP_LEGACY:
+ cpu_probe_legacy(c);
+ break;
++ case PRID_COMP_BROADCOM:
++ cpu_probe_broadcom(c);
++ break;
+ case PRID_COMP_MIPS:
+ cpu_probe_mips(c);
+ break;
+diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
+--- linux.old/arch/mips/kernel/proc.c 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/kernel/proc.c 2006-08-25 00:39:38.000000000 +0200
+@@ -85,6 +85,9 @@
+ [CPU_VR4181A] = "NEC VR4181A",
+ [CPU_SR71000] = "Sandcraft SR71000",
+ [CPU_PR4450] = "Philips PR4450",
++ [CPU_BCM6338] = "BCM6338",
++ [CPU_BCM6345] = "BCM6345",
++ [CPU_BCM6348] = "BCM6348",
+ };
+
+
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/Makefile 2006-08-25 15:39:54.000000000 +0200
+@@ -145,6 +145,15 @@
+ #
+
+ #
++# Broadcom board
++#
++core-$(CONFIG_MIPS_BRCM) += arch/mips/bcm963xx/
++cflags-$(CONFIG_MIPS_BRCM) += -Iinclude/asm-mips/mach-bcm963xx
++cflags-$(CONFIG_MIPS_BRCM) += -Iarch/mips/bcm963xx/include
++load-$(CONFIG_MIPS_BRCM) += 0xffffffff80010000
++
++
++#
+ # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
+ #
+ core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
+diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
+--- linux.old/arch/mips/mm/c-r4k.c 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/mm/c-r4k.c 2006-08-25 00:39:38.000000000 +0200
+@@ -914,6 +914,13 @@
+ if (!(config & MIPS_CONF_M))
+ panic("Don't know how to probe P-caches on this cpu.");
+
++ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348)
++ {
++ printk("brcm mips: enabling icache and dcache...\n");
++ /* Enable caches */
++ write_c0_diag(read_c0_diag() | 0xC0000000);
++ }
++
+ /*
+ * So we seem to be a MIPS32 or MIPS64 CPU
+ * So let's probe the I-cache ...
+diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
+--- linux.old/arch/mips/mm/tlbex.c 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/mm/tlbex.c 2006-08-25 00:39:38.000000000 +0200
+@@ -882,6 +882,9 @@
+ case CPU_4KSC:
+ case CPU_20KC:
+ case CPU_25KF:
++ case CPU_BCM6338:
++ case CPU_BCM6345:
++ case CPU_BCM6348:
+ tlbw(p);
+ break;
+
+diff -urN linux-2.6.17/arch/mips/pci/fixup-bcm96348.c linux-2.6.17-brcm63xx/arch/mips/pci/fixup-bcm96348.c
+--- linux-2.6.17/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-brcm63xx/arch/mips/pci/fixup-bcm96348.c 2006-08-29 10:25:22.000000000 +0200
+@@ -0,0 +1,93 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++
++#include <bcmpci.h>
++#include <bcm_intr.h>
++#include <bcm_map_part.h>
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++
++static char irq_tab_bcm96348[] __initdata = {
++ [0] = INTERRUPT_ID_MPI,
++ [1] = INTERRUPT_ID_MPI,
++#if defined(CONFIG_USB)
++ [USB_HOST_SLOT] = INTERRUPT_ID_USBH
++#endif
++};
++
++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ return irq_tab_bcm96348[slot];
++}
++
++static void bcm96348_fixup(struct pci_dev *dev)
++{
++ uint32 memaddr;
++ uint32 size;
++
++ memaddr = pci_resource_start(dev, 0);
++ size = pci_resource_len(dev, 0);
++
++ switch (PCI_SLOT(dev->devfn)) {
++ case 0:
++ // UBUS to PCI address range
++ // Memory Window 1. Mask determines which bits are decoded.
++ mpi->l2pmrange1 = ~(size-1);
++ // UBUS to PCI Memory base address. This is akin to the ChipSelect base
++ // register.
++ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI Remap Address. Replaces the masked address bits in the
++ // range register with this setting.
++ // Also, enable direct I/O and direct Memory accesses
++ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN);
++ break;
++
++ case 1:
++ // Memory Window 2
++ mpi->l2pmrange2 = ~(size-1);
++ // UBUS to PCI Memory base address.
++ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI Remap Address
++ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN);
++ break;
++
++#if defined(CONFIG_USB)
++ case USB_HOST_SLOT:
++ dev->resource[0].start = USB_HOST_BASE;
++ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1;
++ break;
++#endif
++ }
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
++
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_ANY_ID,
++ bcm96348_fixup);
++
++/*struct pci_fixup pcibios_fixups[] = {
++ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup },
++ {0}
++};*/
+diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
+--- linux.old/arch/mips/pci/Makefile 2006-08-25 00:43:29.000000000 +0200
++++ linux.dev/arch/mips/pci/Makefile 2006-08-25 00:39:38.000000000 +0200
+@@ -18,6 +18,7 @@
+ obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o
+ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
+ obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
++obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
+diff -urN linux.old/arch/mips/pci/ops-bcm96348.c linux.dev/arch/mips/pci/ops-bcm96348.c
+--- linux.old/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/pci/ops-bcm96348.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,276 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/addrspace.h>
++
++#include <bcm_intr.h>
++#include <bcm_map_part.h>
++#include <bcmpci.h>
++
++#include <linux/delay.h>
++
++#if defined(CONFIG_USB)
++#if 0
++#define DPRINT(x...) printk(x)
++#else
++#define DPRINT(x...)
++#endif
++
++static int
++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size);
++static int
++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size);
++
++static bool usb_mem_size_rd = FALSE;
++static uint32 usb_mem_base = 0;
++static uint32 usb_cfg_space_cmd_reg = 0;
++#endif
++static bool pci_mem_size_rd = FALSE;
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++
++static void mpi_SetupPciConfigAccess(uint32 addr)
++{
++ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE;
++}
++
++static void mpi_ClearPciConfigAccess(void)
++{
++ mpi->l2pcfgctl = 0x00000000;
++}
++
++#if defined(CONFIG_USB)
++/* --------------------------------------------------------------------------
++ Name: pci63xx_int_write
++Abstract: PCI Config write on internal device(s)
++ -------------------------------------------------------------------------- */
++static int
++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size)
++{
++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
++ return PCIBIOS_SUCCESSFUL;
++ }
++
++ switch (size) {
++ case 1:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 2:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ switch (where) {
++ case PCI_COMMAND:
++ usb_cfg_space_cmd_reg = *value;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 4:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n",
++ PCI_SLOT(devfn), where, size, *value);
++ switch (where) {
++ case PCI_BASE_ADDRESS_0:
++ if (*value == 0xffffffff) {
++ usb_mem_size_rd = TRUE;
++ } else {
++ usb_mem_base = *value;
++ }
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++/* --------------------------------------------------------------------------
++ Name: pci63xx_int_read
++Abstract: PCI Config read on internal device(s)
++ -------------------------------------------------------------------------- */
++static int
++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size)
++{
++ uint32 retValue = 0xFFFFFFFF;
++
++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
++ return PCIBIOS_SUCCESSFUL;
++ }
++
++ // For now, this is specific to the USB Host controller. We can
++ // make it more general if we have to...
++ // Emulate PCI Config accesses
++ switch (where) {
++ case PCI_VENDOR_ID:
++ case PCI_DEVICE_ID:
++ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000;
++ break;
++ case PCI_COMMAND:
++ case PCI_STATUS:
++ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg;
++ break;
++ case PCI_CLASS_REVISION:
++ case PCI_CLASS_DEVICE:
++ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01;
++ break;
++ case PCI_BASE_ADDRESS_0:
++ if (usb_mem_size_rd) {
++ retValue = USB_BAR0_MEM_SIZE;
++ } else {
++ if (usb_mem_base != 0)
++ retValue = usb_mem_base;
++ else
++ retValue = USB_HOST_BASE;
++ }
++ usb_mem_size_rd = FALSE;
++ break;
++ case PCI_CACHE_LINE_SIZE:
++ case PCI_LATENCY_TIMER:
++ retValue = 0;
++ break;
++ case PCI_HEADER_TYPE:
++ retValue = PCI_HEADER_TYPE_NORMAL;
++ break;
++ case PCI_SUBSYSTEM_VENDOR_ID:
++ retValue = PCI_VENDOR_ID_BROADCOM;
++ break;
++ case PCI_SUBSYSTEM_ID:
++ retValue = 0x6300;
++ break;
++ case PCI_INTERRUPT_LINE:
++ retValue = INTERRUPT_ID_USBH;
++ break;
++ default:
++ break;
++ }
++
++ switch (size) {
++ case 1:
++ *value = (retValue >> ((where & 3) << 3)) & 0xff;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 2:
++ *value = (retValue >> ((where & 3) << 3)) & 0xffff;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 4:
++ *value = retValue;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ default:
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++#endif
++
++static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 * val)
++{
++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
++ uint32 data;
++
++#if defined(CONFIG_USB)
++ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
++ return pci63xx_int_read(devfn, where, val, size);
++#endif
++
++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
++ data = *(uint32 *)ioBase;
++ switch(size) {
++ case 1:
++ *val = (data >> ((where & 3) << 3)) & 0xff;
++ break;
++ case 2:
++ *val = (data >> ((where & 3) << 3)) & 0xffff;
++ break;
++ case 4:
++ *val = data;
++ /* Special case for reading PCI device range */
++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
++ if (pci_mem_size_rd) {
++ /* bcm6348 PCI memory window minimum size is 64K */
++ *val &= PCI_SIZE_64K;
++ }
++ }
++ break;
++ default:
++ break;
++ }
++ pci_mem_size_rd = FALSE;
++ mpi_ClearPciConfigAccess();
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 val)
++{
++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
++ uint32 data;
++
++#if defined(CONFIG_USB)
++ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
++ return pci63xx_int_write(devfn, where, &val, size);
++#endif
++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
++ data = *(uint32 *)ioBase;
++ switch(size) {
++ case 1:
++ data = (data & ~(0xff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 2:
++ data = (data & ~(0xffff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 4:
++ data = val;
++ /* Special case for reading PCI device range */
++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
++ if (val == 0xffffffff)
++ pci_mem_size_rd = TRUE;
++ }
++ break;
++ default:
++ break;
++ }
++ *(uint32 *)ioBase = data;
++ udelay(500);
++ mpi_ClearPciConfigAccess();
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ops bcm96348_pci_ops = {
++ .read = bcm96348_pcibios_read,
++ .write = bcm96348_pcibios_write
++};
+diff -urN linux-2.6.17/arch/mips/pci/pci-bcm96348.c linux-2.6.17-brcm63xx/arch/mips/pci/pci-bcm96348.c
+--- linux-2.6.17/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-brcm63xx/arch/mips/pci/pci-bcm96348.c 2006-08-29 10:25:13.000000000 +0200
+@@ -0,0 +1,54 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++
++//#include <asm/pci_channel.h>
++#include <bcmpci.h>
++
++static struct resource bcm_pci_io_resource = {
++ .name = "bcm96348 pci IO space",
++ .start = BCM_PCI_IO_BASE,
++ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1,
++ .flags = IORESOURCE_IO
++};
++
++static struct resource bcm_pci_mem_resource = {
++ .name = "bcm96348 pci memory space",
++ .start = BCM_PCI_MEM_BASE,
++ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1,
++ .flags = IORESOURCE_MEM
++};
++
++extern struct pci_ops bcm96348_pci_ops;
++
++struct pci_controller bcm96348_controller = {
++ .pci_ops = &bcm96348_pci_ops,
++ .io_resource = &bcm_pci_io_resource,
++ .mem_resource = &bcm_pci_mem_resource,
++};
++
++static void bcm96348_pci_init(void)
++{
++ register_pci_controller(&bcm96348_controller);
++}
++
++arch_initcall(bcm96348_pci_init);
+diff -urN linux.old/drivers/serial/bcm63xx_cons.c linux.dev/drivers/serial/bcm63xx_cons.c
+--- linux.old/drivers/serial/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/serial/bcm63xx_cons.c 2006-08-25 15:37:34.000000000 +0200
+@@ -0,0 +1,1049 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++/* Description: Serial port driver for the BCM963XX. */
++
++#define CARDNAME "bcm963xx_serial driver"
++#define VERSION "2.0"
++#define VER_STR CARDNAME " v" VERSION "\n"
++
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/spinlock.h>
++
++/* for definition of struct console */
++#include <linux/console.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/serial.h>
++#include <linux/serialP.h>
++#include <asm/uaccess.h>
++
++#include <bcmtypes.h>
++#include <board.h>
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++static DEFINE_SPINLOCK(bcm963xx_serial_lock);
++
++extern void _putc(char);
++extern void _puts(const char *);
++
++typedef struct bcm_serial {
++ volatile Uart * port;
++ int type;
++ int flags;
++ int irq;
++ int baud_base;
++ int blocked_open;
++ unsigned short close_delay;
++ unsigned short closing_wait;
++ unsigned short line; /* port/line number */
++ unsigned short cflags; /* line configuration flag */
++ unsigned short x_char; /* xon/xoff character */
++ unsigned short read_status_mask; /* mask for read condition */
++ unsigned short ignore_status_mask; /* mask for ignore condition */
++ unsigned long event; /* mask used in BH */
++ int xmit_head; /* Position of the head */
++ int xmit_tail; /* Position of the tail */
++ int xmit_cnt; /* Count of the chars in the buffer */
++ int count; /* indicates how many times it has been opened */
++ int magic;
++
++ struct async_icount icount; /* keep track of things ... */
++ struct tty_struct *tty; /* tty associated */
++ struct termios normal_termios;
++
++ wait_queue_head_t open_wait;
++ wait_queue_head_t close_wait;
++
++ long session; /* Session of opening process */
++ long pgrp; /* pgrp of opening process */
++
++ unsigned char is_initialized;
++} Context;
++
++
++/*---------------------------------------------------------------------*/
++/* Define bits in the Interrupt Enable register */
++/*---------------------------------------------------------------------*/
++/* Enable receive interrupt */
++#define RXINT (RXFIFONE|RXOVFERR)
++
++/* Enable transmit interrupt */
++#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR)
++
++/* Enable receiver line status interrupt */
++#define LSINT (RXBRK|RXPARERR|RXFRAMERR)
++
++#define BCM_NUM_UARTS 1
++
++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
++
++
++static struct bcm_serial multi[BCM_NUM_UARTS];
++static struct bcm_serial *lines[BCM_NUM_UARTS];
++static struct tty_driver *serial_driver;
++static struct termios *serial_termios[BCM_NUM_UARTS];
++static struct termios *serial_termios_locked[BCM_NUM_UARTS];
++
++
++static void bcm_stop (struct tty_struct *tty);
++static void bcm_start (struct tty_struct *tty);
++static inline void receive_chars (struct bcm_serial * info);
++static int startup (struct bcm_serial *info);
++static void shutdown (struct bcm_serial * info);
++static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
++static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
++static int bcm63xx_cons_write (struct tty_struct *tty,
++ const unsigned char *buf, int count);
++static int bcm63xx_cons_write_room (struct tty_struct *tty);
++static int bcm_chars_in_buffer (struct tty_struct *tty);
++static void bcm_flush_buffer (struct tty_struct *tty);
++static void bcm_throttle (struct tty_struct *tty);
++static void bcm_unthrottle (struct tty_struct *tty);
++static void bcm_send_xchar (struct tty_struct *tty, char ch);
++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo);
++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info);
++static int get_lsr_info (struct bcm_serial *info, unsigned int *value);
++static void send_break (struct bcm_serial *info, int duration);
++static int bcm_ioctl (struct tty_struct * tty, struct file * file,
++ unsigned int cmd, unsigned long arg);
++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios);
++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp);
++static void bcm_hangup (struct tty_struct *tty);
++static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info);
++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp);
++static int __init bcm63xx_serialinit(void);
++
++
++/*
++ * ------------------------------------------------------------
++ * rs_stop () and rs_start ()
++ *
++ * These routines are called before setting or resetting
++ * tty->stopped. They enable or disable transmitter interrupts,
++ * as necessary.
++ * ------------------------------------------------------------
++ */
++static void bcm_stop (struct tty_struct *tty)
++{
++}
++
++static void bcm_start (struct tty_struct *tty)
++{
++ _puts(CARDNAME " Start\n");
++}
++
++/*
++ * ------------------------------------------------------------
++ * receive_char ()
++ *
++ * This routine deals with inputs from any lines.
++ * ------------------------------------------------------------
++ */
++static inline void receive_chars (struct bcm_serial * info)
++{
++ struct tty_struct *tty = 0;
++ struct async_icount * icount;
++ int ignore = 0;
++ unsigned short status, tmp;
++ UCHAR ch = 0;
++ while ((status = info->port->intStatus) & RXINT)
++ {
++ char flag_char = TTY_NORMAL;
++
++ if (status & RXFIFONE)
++ ch = info->port->Data; // Read the character
++ tty = info->tty; /* now tty points to the proper dev */
++ icount = &info->icount;
++ if (! tty)
++ break;
++ if (!tty_buffer_request_room(tty, 1))
++ break;
++ icount->rx++;
++ if (status & RXBRK)
++ {
++ flag_char = TTY_BREAK;
++ icount->brk++;
++ }
++ // keep track of the statistics
++ if (status & (RXFRAMERR | RXPARERR | RXOVFERR))
++ {
++ if (status & RXPARERR) /* parity error */
++ icount->parity++;
++ else
++ if (status & RXFRAMERR) /* frame error */
++ icount->frame++;
++ if (status & RXOVFERR)
++ {
++ // Overflow. Reset the RX FIFO
++ info->port->fifoctl |= RSTRXFIFOS;
++ icount->overrun++;
++ }
++ // check to see if we should ignore the character
++ // and mask off conditions that should be ignored
++ if (status & info->ignore_status_mask)
++ {
++ if (++ignore > 100 )
++ break;
++ goto ignore_char;
++ }
++ // Mask off the error conditions we want to ignore
++ tmp = status & info->read_status_mask;
++ if (tmp & RXPARERR)
++ {
++ flag_char = TTY_PARITY;
++ }
++ else
++ if (tmp & RXFRAMERR)
++ {
++ flag_char = TTY_FRAME;
++ }
++ if (tmp & RXOVFERR)
++ {
++ tty_insert_flip_char(tty, ch, flag_char);
++ ch = 0;
++ flag_char = TTY_OVERRUN;
++ if (!tty_buffer_request_room(tty, 1))
++ break;
++ }
++ }
++ tty_insert_flip_char(tty, ch, flag_char);
++ }
++ignore_char:;
++ tty_flip_buffer_push(tty);
++ tty_schedule_flip(tty);
++
++}
++
++
++/*
++ * ------------------------------------------------------------
++ * bcm_interrupt ()
++ *
++ * this is the main interrupt routine for the chip.
++ * It deals with the multiple ports.
++ * ------------------------------------------------------------
++ */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++#else
++static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++#endif
++{
++ struct bcm_serial * info = lines[0];
++ UINT16 intStat;
++
++ /* get pending interrupt flags from UART */
++
++ /* Mask with only the serial interrupts that are enabled */
++ intStat = info->port->intStatus & info->port->intMask;
++ while (intStat)
++ {
++ if (intStat & RXINT)
++ receive_chars (info);
++ else
++ if (intStat & TXINT)
++ info->port->intStatus = TXINT;
++ else /* don't know what it was, so let's mask it */
++ info->port->intMask &= ~intStat;
++
++ intStat = info->port->intStatus & info->port->intMask;
++ }
++
++ // Clear the interrupt
++ BcmHalInterruptEnable (INTERRUPT_ID_UART);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ return IRQ_HANDLED;
++#endif
++}
++
++/*
++ * -------------------------------------------------------------------
++ * startup ()
++ *
++ * various initialization tasks
++ * -------------------------------------------------------------------
++ */
++static int startup (struct bcm_serial *info)
++{
++ // Port is already started...
++ return 0;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * shutdown ()
++ *
++ * This routine will shutdown a serial port; interrupts are disabled, and
++ * DTR is dropped if the hangup on close termio flag is on.
++ * -------------------------------------------------------------------
++ */
++static void shutdown (struct bcm_serial * info)
++{
++ unsigned long flags;
++ if (!info->is_initialized)
++ return;
++
++ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
++
++ info->port->control &= ~(BRGEN|TXEN|RXEN);
++ if (info->tty)
++ set_bit (TTY_IO_ERROR, &info->tty->flags);
++ info->is_initialized = 0;
++
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++}
++/*
++ * -------------------------------------------------------------------
++ * change_speed ()
++ *
++ * Set the baud rate, character size, parity and stop bits.
++ * -------------------------------------------------------------------
++ */
++static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
++{
++ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
++
++ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
++ switch( cFlag & (CBAUD | CBAUDEX) )
++ {
++ case B115200:
++ ulBaud = 115200;
++ break;
++ case B57600:
++ ulBaud = 57600;
++ break;
++ case B38400:
++ ulBaud = 38400;
++ break;
++ case B19200:
++ ulBaud = 19200;
++ break;
++ case B9600:
++ ulBaud = 9600;
++ break;
++ case B4800:
++ ulBaud = 4800;
++ break;
++ case B2400:
++ ulBaud = 2400;
++ break;
++ case B1800:
++ ulBaud = 1800;
++ break;
++ case B1200:
++ ulBaud = 1200;
++ break;
++ case B600:
++ ulBaud = 600;
++ break;
++ case B300:
++ ulBaud = 300;
++ break;
++ case B200:
++ ulBaud = 200;
++ break;
++ case B150:
++ ulBaud = 150;
++ break;
++ case B134:
++ ulBaud = 134;
++ break;
++ case B110:
++ ulBaud = 110;
++ break;
++ case B75:
++ ulBaud = 75;
++ break;
++ case B50:
++ ulBaud = 50;
++ break;
++ default:
++ ulBaud = 115200;
++ break;
++ }
++
++ /* Calculate buad rate. */
++ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
++ ulTmp = (ulClockFreqHz / ulBaud) / 16;
++ if( ulTmp & 0x01 )
++ ulTmp /= 2; /* Rounding up, so sub is already accounted for */
++ else
++ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */
++ pUart->baudword = ulTmp;
++
++ /* Set character size, stop bits and parity. */
++ switch( cFlag & CSIZE )
++ {
++ case CS5:
++ ulTmp = BITS5SYM; /* select transmit 5 bit data size */
++ break;
++ case CS6:
++ ulTmp = BITS6SYM; /* select transmit 6 bit data size */
++ break;
++ case CS7:
++ ulTmp = BITS7SYM; /* select transmit 7 bit data size */
++ break;
++ default:
++ ulTmp = BITS8SYM; /* select transmit 8 bit data size */
++ break;
++ }
++ if( cFlag & CSTOPB )
++ ulTmp |= TWOSTOP; /* select 2 stop bits */
++ else
++ ulTmp |= ONESTOP; /* select one stop bit */
++
++ /* Write these values into the config reg. */
++ pUart->config = ulTmp;
++ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
++ switch( cFlag & (PARENB | PARODD) )
++ {
++ case PARENB|PARODD:
++ pUart->control |= RXPARITYEN | TXPARITYEN;
++ break;
++ case PARENB:
++ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
++ break;
++ default:
++ pUart->control |= 0;
++ break;
++ }
++
++ /* Reset and flush uart */
++ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
++}
++
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_flush_char ()
++ *
++ * Nothing to flush. Polled I/O is used.
++ * -------------------------------------------------------------------
++ */
++static void bcm63xx_cons_flush_chars (struct tty_struct *tty)
++{
++}
++
++
++/*
++ * -------------------------------------------------------------------
++ * bcm63xx_cons_write ()
++ *
++ * Main output routine using polled I/O.
++ * -------------------------------------------------------------------
++ */
++static int bcm63xx_cons_write (struct tty_struct *tty,
++ const unsigned char *buf, int count)
++{
++ int c;
++
++ for (c = 0; c < count; c++)
++ _putc(buf[c]);
++ return count;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm63xx_cons_write_room ()
++ *
++ * Compute the amount of space available for writing.
++ * -------------------------------------------------------------------
++ */
++static int bcm63xx_cons_write_room (struct tty_struct *tty)
++{
++ /* Pick a number. Any number. Polled I/O is used. */
++ return 1024;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_chars_in_buffer ()
++ *
++ * compute the amount of char left to be transmitted
++ * -------------------------------------------------------------------
++ */
++static int bcm_chars_in_buffer (struct tty_struct *tty)
++{
++ return 0;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_flush_buffer ()
++ *
++ * Empty the output buffer
++ * -------------------------------------------------------------------
++ */
++static void bcm_flush_buffer (struct tty_struct *tty)
++{
++ tty_wakeup(tty);
++}
++
++/*
++ * ------------------------------------------------------------
++ * bcm_throttle () and bcm_unthrottle ()
++ *
++ * This routine is called by the upper-layer tty layer to signal that
++ * incoming characters should be throttled (or not).
++ * ------------------------------------------------------------
++ */
++static void bcm_throttle (struct tty_struct *tty)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ if (I_IXOFF(tty))
++ info->x_char = STOP_CHAR(tty);
++}
++
++static void bcm_unthrottle (struct tty_struct *tty)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ if (I_IXOFF(tty))
++ {
++ if (info->x_char)
++ info->x_char = 0;
++ else
++ info->x_char = START_CHAR(tty);
++ }
++}
++
++static void bcm_send_xchar (struct tty_struct *tty, char ch)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ info->x_char = ch;
++ if (ch)
++ bcm_start (info->tty);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_ioctl () and friends
++ * ------------------------------------------------------------
++ */
++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo)
++{
++ struct serial_struct tmp;
++
++ if (!retinfo)
++ return -EFAULT;
++
++ memset (&tmp, 0, sizeof(tmp));
++ tmp.type = info->type;
++ tmp.line = info->line;
++ tmp.port = (int) info->port;
++ tmp.irq = info->irq;
++ tmp.flags = 0;
++ tmp.baud_base = info->baud_base;
++ tmp.close_delay = info->close_delay;
++ tmp.closing_wait = info->closing_wait;
++
++ return copy_to_user (retinfo, &tmp, sizeof(*retinfo));
++}
++
++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info)
++{
++ struct serial_struct new_serial;
++ struct bcm_serial old_info;
++ int retval = 0;
++
++ if (!new_info)
++ return -EFAULT;
++
++ copy_from_user (&new_serial, new_info, sizeof(new_serial));
++ old_info = *info;
++
++ if (!capable(CAP_SYS_ADMIN))
++ return -EPERM;
++
++
++ if (info->count > 1)
++ return -EBUSY;
++
++ /* OK, past this point, all the error checking has been done.
++ * At this point, we start making changes.....
++ */
++ info->baud_base = new_serial.baud_base;
++ info->type = new_serial.type;
++ info->close_delay = new_serial.close_delay;
++ info->closing_wait = new_serial.closing_wait;
++ retval = startup (info);
++ return retval;
++}
++
++/*
++ * get_lsr_info - get line status register info
++ *
++ * Purpose: Let user call ioctl() to get info when the UART physically
++ * is emptied. On bus types like RS485, the transmitter must
++ * release the bus after transmitting. This must be done when
++ * the transmit shift register is empty, not be done when the
++ * transmit holding register is empty. This functionality
++ * allows an RS485 driver to be written in user space.
++ */
++static int get_lsr_info (struct bcm_serial *info, unsigned int *value)
++{
++ return( 0 );
++}
++
++/*
++ * This routine sends a break character out the serial port.
++ */
++static void send_break (struct bcm_serial *info, int duration)
++{
++ unsigned long flags;
++
++ if (!info->port)
++ return;
++
++ current->state = TASK_INTERRUPTIBLE;
++
++ /*save_flags (flags);
++ cli();*/
++ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
++
++ info->port->control |= XMITBREAK;
++ schedule_timeout(duration);
++ info->port->control &= ~XMITBREAK;
++
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++ //restore_flags (flags);
++}
++
++static int bcm_ioctl (struct tty_struct * tty, struct file * file,
++ unsigned int cmd, unsigned long arg)
++{
++ int error;
++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
++ int retval;
++
++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
++ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT))
++ {
++ if (tty->flags & (1 << TTY_IO_ERROR))
++ return -EIO;
++ }
++ switch (cmd)
++ {
++
++ case TCSBRK: /* SVID version: non-zero arg --> no break */
++ retval = tty_check_change (tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent (tty, 0);
++ if (!arg)
++ send_break (info, HZ/4); /* 1/4 second */
++ return 0;
++
++ case TCSBRKP: /* support for POSIX tcsendbreak() */
++ retval = tty_check_change (tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent (tty, 0);
++ send_break (info, arg ? arg*(HZ/10) : HZ/4);
++ return 0;
++
++ case TIOCGSOFTCAR:
++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long));
++ if (!error)
++ return -EFAULT;
++ else
++ {
++ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
++ return 0;
++ }
++
++ case TIOCSSOFTCAR:
++ error = get_user (arg, (unsigned long *)arg);
++ if (error)
++ return error;
++ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
++ return 0;
++
++ case TIOCGSERIAL:
++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct));
++ if (!error)
++ return -EFAULT;
++ else
++ return get_serial_info (info, (struct serial_struct *)arg);
++
++ case TIOCSSERIAL:
++ return set_serial_info (info, (struct serial_struct *) arg);
++
++ case TIOCSERGETLSR: /* Get line status register */
++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int));
++ if (!error)
++ return -EFAULT;
++ else
++ return get_lsr_info (info, (unsigned int *)arg);
++
++ case TIOCSERGSTRUCT:
++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial));
++ if (!error)
++ return -EFAULT;
++ else
++ {
++ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial));
++ return 0;
++ }
++
++ default:
++ return -ENOIOCTLCMD;
++ }
++ return 0;
++}
++
++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++
++ if( tty->termios->c_cflag != old_termios->c_cflag )
++ change_speed (info->port, tty->termios->c_cflag);
++}
++
++/*
++ * ------------------------------------------------------------
++ * bcm63xx_cons_close()
++ *
++ * This routine is called when the serial port gets closed. First, we
++ * wait for the last remaining data to be sent. Then, we turn off
++ * the transmit enable and receive enable flags.
++ * ------------------------------------------------------------
++ */
++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp)
++{
++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
++ unsigned long flags;
++
++ if (!info)
++ return;
++
++ /*save_flags (flags);
++ cli();*/
++ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
++
++ if (tty_hung_up_p (filp))
++ {
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++ //restore_flags (flags);
++ return;
++ }
++
++ if ((tty->count == 1) && (info->count != 1))
++ {
++
++ /* Uh, oh. tty->count is 1, which means that the tty
++ * structure will be freed. Info->count should always
++ * be one in these conditions. If it's greater than
++ * one, we've got real problems, since it means the
++ * serial port won't be shutdown.
++ */
++ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
++ "info->count is %d\n", info->count);
++ info->count = 1;
++ }
++
++ if (--info->count < 0)
++ {
++ printk("ds_close: bad serial port count for ttys%d: %d\n",
++ info->line, info->count);
++ info->count = 0;
++ }
++
++ if (info->count)
++ {
++ //restore_flags (flags);
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++ return;
++ }
++
++ /* Now we wait for the transmit buffer to clear; and we notify
++ * the line discipline to only process XON/XOFF characters.
++ */
++ tty->closing = 1;
++
++ /* At this point we stop accepting input. To do this, we
++ * disable the receive line status interrupts.
++ */
++ shutdown (info);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ if (tty->driver->flush_buffer)
++ tty->driver->flush_buffer (tty);
++#else
++ if (tty->driver.flush_buffer)
++ tty->driver.flush_buffer (tty);
++#endif
++ if (tty->ldisc.flush_buffer)
++ tty->ldisc.flush_buffer (tty);
++
++ tty->closing = 0;
++ info->event = 0;
++ info->tty = 0;
++ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num)
++ {
++ if (tty->ldisc.close)
++ (tty->ldisc.close)(tty);
++ tty->ldisc = *tty_ldisc_get(N_TTY);
++ tty->termios->c_line = N_TTY;
++ if (tty->ldisc.open)
++ (tty->ldisc.open)(tty);
++ }
++ if (info->blocked_open)
++ {
++ if (info->close_delay)
++ {
++ current->state = TASK_INTERRUPTIBLE;
++ schedule_timeout(info->close_delay);
++ }
++ wake_up_interruptible (&info->open_wait);
++ }
++ wake_up_interruptible (&info->close_wait);
++
++ //restore_flags (flags);
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++}
++
++/*
++ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
++ */
++static void bcm_hangup (struct tty_struct *tty)
++{
++
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++
++ shutdown (info);
++ info->event = 0;
++ info->count = 0;
++ info->tty = 0;
++ wake_up_interruptible (&info->open_wait);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_open() and friends
++ * ------------------------------------------------------------
++ */
++static int block_til_ready (struct tty_struct *tty, struct file *filp,
++ struct bcm_serial *info)
++{
++ return 0;
++}
++
++/*
++ * This routine is called whenever a serial port is opened. It
++ * enables interrupts for a serial port. It also performs the
++ * serial-specific initialization for the tty structure.
++ */
++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp)
++{
++ struct bcm_serial *info;
++ int retval, line;
++
++ // Make sure we're only opening on of the ports we support
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
++#else
++ line = MINOR(tty->device) - tty->driver.minor_start;
++#endif
++
++ if ((line < 0) || (line >= BCM_NUM_UARTS))
++ return -ENODEV;
++
++ info = lines[line];
++
++ tty->low_latency=1;
++ info->port->intMask = 0; /* Clear any pending interrupts */
++ info->port->intMask = RXINT; /* Enable RX */
++
++ info->count++;
++ tty->driver_data = info;
++ info->tty = tty;
++ BcmHalInterruptEnable (INTERRUPT_ID_UART);
++
++ // Start up serial port
++ retval = startup (info);
++ if (retval)
++ return retval;
++
++ retval = block_til_ready (tty, filp, info);
++ if (retval)
++ return retval;
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ info->pgrp = process_group(current);
++ info->session = current->signal->session;
++#else
++ info->session = current->session;
++ info->pgrp = current->pgrp;
++#endif
++
++ return 0;
++}
++
++
++static struct tty_operations rs_ops = {
++ .open = bcm63xx_cons_open,
++ .close = bcm63xx_cons_close,
++ .write = bcm63xx_cons_write,
++ .flush_chars = bcm63xx_cons_flush_chars,
++ .write_room = bcm63xx_cons_write_room,
++ .chars_in_buffer = bcm_chars_in_buffer,
++ .flush_buffer = bcm_flush_buffer,
++ .ioctl = bcm_ioctl,
++ .throttle = bcm_throttle,
++ .unthrottle = bcm_unthrottle,
++ .send_xchar = bcm_send_xchar,
++ .set_termios = bcm_set_termios,
++ .stop = bcm_stop,
++ .start = bcm_start,
++ .hangup = bcm_hangup,
++};
++
++/* --------------------------------------------------------------------------
++ Name: bcm63xx_serialinit
++ Purpose: Initialize our BCM63xx serial driver
++-------------------------------------------------------------------------- */
++static int __init bcm63xx_serialinit(void)
++{
++ int i, flags;
++ struct bcm_serial * info;
++
++ // Print the driver version information
++ printk(VER_STR);
++ serial_driver = alloc_tty_driver(BCM_NUM_UARTS);
++ if (!serial_driver)
++ return -ENOMEM;
++
++ serial_driver->owner = THIS_MODULE;
++ serial_driver->devfs_name = "tts/";
++// serial_driver.magic = TTY_DRIVER_MAGIC;
++ serial_driver->name = "ttyS";
++ serial_driver->major = TTY_MAJOR;
++ serial_driver->minor_start = 64;
++// serial_driver.num = BCM_NUM_UARTS;
++ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
++ serial_driver->subtype = SERIAL_TYPE_NORMAL;
++ serial_driver->init_termios = tty_std_termios;
++ serial_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
++ serial_driver->flags = TTY_DRIVER_REAL_RAW;
++
++ serial_driver->termios = serial_termios;
++ serial_driver->termios_locked = serial_termios_locked;
++
++ tty_set_operations(serial_driver, &rs_ops);
++
++ if (tty_register_driver (serial_driver))
++ panic("Couldn't register serial driver\n");
++
++ //save_flags(flags); cli();
++ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
++
++ for (i = 0; i < BCM_NUM_UARTS; i++)
++ {
++ info = &multi[i];
++ lines[i] = info;
++ info->magic = SERIAL_MAGIC;
++ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
++ info->tty = 0;
++ info->irq = (2 - i) + 8;
++ info->line = i;
++ info->close_delay = 50;
++ info->closing_wait = 3000;
++ info->x_char = 0;
++ info->event = 0;
++ info->count = 0;
++ info->blocked_open = 0;
++ info->normal_termios = serial_driver->init_termios;
++ init_waitqueue_head(&info->open_wait);
++ init_waitqueue_head(&info->close_wait);
++
++ /* If we are pointing to address zero then punt - not correctly
++ * set up in setup.c to handle this.
++ */
++ if (! info->port)
++ return 0;
++ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
++ }
++
++ /* order matters here... the trick is that flags
++ * is updated... in request_irq - to immediatedly obliterate
++ * it is unwise.
++ */
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++ return 0;
++}
++
++module_init(bcm63xx_serialinit);
++
++/* --------------------------------------------------------------------------
++ Name: bcm_console_print
++ Purpose: bcm_console_print is registered for printk.
++ The console_lock must be held when we get here.
++-------------------------------------------------------------------------- */
++static void bcm_console_print (struct console * cons, const char * str,
++ unsigned int count)
++{
++ unsigned int i;
++ //_puts(str);
++ for(i=0; i<count; i++, str++)
++ {
++ _putc(*str);
++ if (*str == 10)
++ {
++ _putc(13);
++ }
++ }
++}
++
++static struct tty_driver * bcm_console_device(struct console * c, int *index)
++{
++ *index = c->index;
++ return serial_driver;
++}
++
++static int __init bcm_console_setup(struct console * co, char * options)
++{
++ return 0;
++}
++
++static struct console bcm_sercons = {
++ .name = "ttyS",
++ .write = bcm_console_print,
++ .device = bcm_console_device,
++ .setup = bcm_console_setup,
++ .flags = CON_PRINTBUFFER,
++ .index = -1,
++};
++
++static int __init bcm63xx_console_init(void)
++{
++ register_console(&bcm_sercons);
++ return 0;
++}
++
++console_initcall(bcm63xx_console_init);
+diff -urN linux.old/drivers/serial/Makefile linux.dev/drivers/serial/Makefile
+--- linux.old/drivers/serial/Makefile 2006-06-18 03:49:35.000000000 +0200
++++ linux.dev/drivers/serial/Makefile 2006-08-25 15:38:44.000000000 +0200
+@@ -55,3 +55,4 @@
+ obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
+ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
+ obj-$(CONFIG_SERIAL_AT91) += at91_serial.o
++obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
+diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
+--- linux.old/include/asm-mips/bootinfo.h 2006-08-25 00:43:22.000000000 +0200
++++ linux.dev/include/asm-mips/bootinfo.h 2006-08-25 00:39:38.000000000 +0200
+@@ -218,6 +218,14 @@
+ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
+ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
+
++/*
++ * Valid machtype for group BRCM
++ */
++#define MACH_GROUP_BRCM 23 /* Broadcom boards */
++#define MACH_BCM96338 0
++#define MACH_BCM96345 1
++#define MACH_BCM96348 2
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
+diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
+--- linux.old/include/asm-mips/cpu.h 2006-08-25 00:43:22.000000000 +0200
++++ linux.dev/include/asm-mips/cpu.h 2006-08-25 00:39:38.000000000 +0200
+@@ -103,6 +103,13 @@
+
+ #define PRID_IMP_SR71000 0x0400
+
++/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
++ */
++
++#define PRID_IMP_BCM6338 0x9000
++#define PRID_IMP_BCM6345 0x8000
++#define PRID_IMP_BCM6348 0x9100
++
+ /*
+ * Definitions for 7:0 on legacy processors
+ */
+@@ -200,7 +207,10 @@
+ #define CPU_SB1A 62
+ #define CPU_74K 63
+ #define CPU_R14000 64
+-#define CPU_LAST 64
++#define CPU_BCM6338 65
++#define CPU_BCM6345 66
++#define CPU_BCM6348 67
++#define CPU_LAST 67
+
+ /*
+ * ISA Level encodings
+diff -urN linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
+--- linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-08-25 11:27:40.000000000 +0200
+@@ -0,0 +1,36 @@
++#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_has_tlb 1
++#define cpu_has_4kex 4
++#define cpu_has_4ktlb 8
++#define cpu_has_fpu 0
++#define cpu_has_32fpr 0
++#define cpu_has_counter 0x40
++#define cpu_has_watch 0
++#define cpu_has_mips16 0
++#define cpu_has_divec 0x200
++#define cpu_has_vce 0
++#define cpu_has_cache_cdex_p 0
++#define cpu_has_cache_cdex_s 0
++#define cpu_has_prefetch 0x40000
++#define cpu_has_mcheck 0x2000
++#define cpu_has_ejtag 0x4000
++#define cpu_has_llsc 0x10000
++#define cpu_has_vtag_icache 0
++#define cpu_has_dc_aliases 0
++#define cpu_has_ic_fills_f_dc 0
++
++#define cpu_has_nofpuex 0
++#define cpu_has_64bits 0
++#define cpu_has_64bit_zero_reg 0
++#define cpu_has_64bit_gp_regs 0
++#define cpu_has_64bit_addresses 0
++
++#define cpu_has_subset_pcaches 0
++
++#define cpu_dcache_line_size() 16
++#define cpu_icache_line_size() 16
++#define cpu_scache_line_size() 0
++
++#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
+diff -urN linux.old/include/asm-mips/mach-generic/param.h linux.dev/include/asm-mips/mach-generic/param.h
+--- linux.old/include/asm-mips/mach-generic/param.h 2006-08-25 00:43:22.000000000 +0200
++++ linux.dev/include/asm-mips/mach-generic/param.h 2006-08-25 00:39:38.000000000 +0200
+@@ -8,6 +8,6 @@
+ #ifndef __ASM_MACH_GENERIC_PARAM_H
+ #define __ASM_MACH_GENERIC_PARAM_H
+
+-#define HZ 1000 /* Internal kernel timer frequency */
++#define HZ 200 /* Internal kernel timer frequency */
+
+ #endif /* __ASM_MACH_GENERIC_PARAM_H */
+diff -urN linux.old/include/asm-mips/module.h linux.dev/include/asm-mips/module.h
+--- linux.old/include/asm-mips/module.h 2006-08-25 00:43:22.000000000 +0200
++++ linux.dev/include/asm-mips/module.h 2006-08-25 00:39:38.000000000 +0200
+@@ -113,6 +113,12 @@
+ #define MODULE_PROC_FAMILY "RM9000 "
+ #elif defined CONFIG_CPU_SB1
+ #define MODULE_PROC_FAMILY "SB1 "
++#elif defined CONFIG_CPU_BCM6338
++#define MODULE_PROC_FAMILY "BCM6338 "
++#elif defined CONFIG_CPU_BCM6345
++#define MODULE_PROC_FAMILY "BCM6345 "
++#elif defined CONFIG_CPU_BCM6348
++#define MODULE_PROC_FAMILY "BCM6348 "
+ #else
+ #error MODULE_PROC_FAMILY undefined for your processor configuration
+ #endif
+