diff options
Diffstat (limited to 'target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.c')
-rw-r--r-- | target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.c | 222 |
1 files changed, 0 insertions, 222 deletions
diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.c deleted file mode 100644 index 601700d..0000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/bootinfo.h> - -#include "pci-bcm63xx.h" - -/* allow PCI to be disabled at runtime depending on board nvram - * configuration */ -int bcm63xx_pci_enabled = 0; - -static struct resource bcm_pci_mem_resource = { - .name = "bcm63xx PCI memory space", - .start = BCM_PCI_MEM_BASE_PA, - .end = BCM_PCI_MEM_END_PA, - .flags = IORESOURCE_MEM -}; - -static struct resource bcm_pci_io_resource = { - .name = "bcm63xx PCI IO space", - .start = BCM_PCI_IO_BASE_PA, -#ifdef CONFIG_CARDBUS - .end = BCM_PCI_IO_HALF_PA, -#else - .end = BCM_PCI_IO_END_PA, -#endif - .flags = IORESOURCE_IO -}; - -struct pci_controller bcm63xx_controller = { - .pci_ops = &bcm63xx_pci_ops, - .io_resource = &bcm_pci_io_resource, - .mem_resource = &bcm_pci_mem_resource, -}; - -/* - * We handle cardbus via a fake Cardbus bridge, memory and io spaces - * have to be clearly separated from PCI one since we have different - * memory decoder. - */ -#ifdef CONFIG_CARDBUS -static struct resource bcm_cb_mem_resource = { - .name = "bcm63xx Cardbus memory space", - .start = BCM_CB_MEM_BASE_PA, - .end = BCM_CB_MEM_END_PA, - .flags = IORESOURCE_MEM -}; - -static struct resource bcm_cb_io_resource = { - .name = "bcm63xx Cardbus IO space", - .start = BCM_PCI_IO_HALF_PA + 1, - .end = BCM_PCI_IO_END_PA, - .flags = IORESOURCE_IO -}; - -struct pci_controller bcm63xx_cb_controller = { - .pci_ops = &bcm63xx_cb_ops, - .io_resource = &bcm_cb_io_resource, - .mem_resource = &bcm_cb_mem_resource, -}; -#endif - -static u32 bcm63xx_int_cfg_readl(u32 reg) -{ - u32 tmp; - - tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; - tmp |= MPI_PCICFGCTL_WRITEEN_MASK; - bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); - iob(); - return bcm_mpi_readl(MPI_PCICFGDATA_REG); -} - -static void bcm63xx_int_cfg_writel(u32 val, u32 reg) -{ - u32 tmp; - - tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; - tmp |= MPI_PCICFGCTL_WRITEEN_MASK; - bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); - bcm_mpi_writel(val, MPI_PCICFGDATA_REG); -} - -void __iomem *pci_iospace_start; - -static int __init bcm63xx_pci_init(void) -{ - unsigned int mem_size; - u32 val; - - if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) - return -ENODEV; - - if (!bcm63xx_pci_enabled) - return -ENODEV; - - /* - * configuration access are done through IO space, remap 4 - * first bytes to access it from CPU. - * - * this means that no io access from CPU should happen while - * we do a configuration cycle, but there's no way we can add - * a spinlock for each io access, so this is currently kind of - * broken on SMP. - */ - pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4); - if (!pci_iospace_start) - return -ENOMEM; - - /* setup local bus to PCI access (PCI memory) */ - val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK; - bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG); - bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG); - bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG); - - /* set Cardbus IDSEL (type 0 cfg access on primary bus for - * this IDSEL will be done on Cardbus instead) */ - val = bcm_pcmcia_readl(PCMCIA_C1_REG); - val &= ~PCMCIA_C1_CBIDSEL_MASK; - val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT); - bcm_pcmcia_writel(val, PCMCIA_C1_REG); - -#ifdef CONFIG_CARDBUS - /* setup local bus to PCI access (Cardbus memory) */ - val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK; - bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG); - bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG); - val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK; - bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG); -#else - /* disable second access windows */ - bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG); -#endif - - /* setup local bus to PCI access (IO memory), we have only 1 - * IO window for both PCI and cardbus, but it cannot handle - * both at the same time, assume standard PCI for now, if - * cardbus card has IO zone, PCI fixup will change window to - * cardbus */ - val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK; - bcm_mpi_writel(val, MPI_L2PIOBASE_REG); - bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG); - bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG); - - /* enable PCI related GPIO pins */ - bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG); - - /* setup PCI to local bus access, used by PCI device to target - * local RAM while bus mastering */ - bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3); - if (BCMCPU_IS_6358()) - val = MPI_SP0_REMAP_ENABLE_MASK; - else - val = 0; - bcm_mpi_writel(val, MPI_SP0_REMAP_REG); - - bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4); - bcm_mpi_writel(0, MPI_SP1_REMAP_REG); - - mem_size = bcm63xx_get_memory_size(); - - /* 6348 before rev b0 exposes only 16 MB of RAM memory through - * PCI, throw a warning if we have more memory */ - if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) { - if (mem_size > (16 * 1024 * 1024)) - printk(KERN_WARNING "bcm63xx: this CPU " - "revision cannot handle more than 16MB " - "of RAM for PCI bus mastering\n"); - } else { - /* setup sp0 range to local RAM size */ - bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG); - bcm_mpi_writel(0, MPI_SP1_RANGE_REG); - } - - /* change host bridge retry counter to infinite number of - * retry, needed for some broadcom wifi cards with Silicon - * Backplane bus where access to srom seems very slow */ - val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS); - val &= ~REG_TIMER_RETRY_MASK; - bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS); - - /* enable memory decoder and bus mastering */ - val = bcm63xx_int_cfg_readl(PCI_COMMAND); - val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - bcm63xx_int_cfg_writel(val, PCI_COMMAND); - - /* enable read prefetching & disable byte swapping for bus - * mastering transfers */ - val = bcm_mpi_readl(MPI_PCIMODESEL_REG); - val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK; - val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK; - val &= ~MPI_PCIMODESEL_PREFETCH_MASK; - val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT); - bcm_mpi_writel(val, MPI_PCIMODESEL_REG); - - /* enable pci interrupt */ - val = bcm_mpi_readl(MPI_LOCINT_REG); - val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT); - bcm_mpi_writel(val, MPI_LOCINT_REG); - - register_pci_controller(&bcm63xx_controller); - -#ifdef CONFIG_CARDBUS - register_pci_controller(&bcm63xx_cb_controller); -#endif - - /* mark memory space used for IO mapping as reserved */ - request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE, - "bcm63xx PCI IO space"); - return 0; -} - -arch_initcall(bcm63xx_pci_init); |