diff options
Diffstat (limited to 'target/linux/brcm63xx/patches-2.6.27')
-rw-r--r-- | target/linux/brcm63xx/patches-2.6.27/013-bcm96358vw.patch | 42 | ||||
-rw-r--r-- | target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch | 73 |
2 files changed, 115 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/patches-2.6.27/013-bcm96358vw.patch b/target/linux/brcm63xx/patches-2.6.27/013-bcm96358vw.patch new file mode 100644 index 0000000..f7f16a6 --- /dev/null +++ b/target/linux/brcm63xx/patches-2.6.27/013-bcm96358vw.patch @@ -0,0 +1,42 @@ +diff -urN linux-2.6.27/arch/mips/bcm63xx/boards/board_bcm963xx.c linux-2.6.27.new/arch/mips/bcm63xx/boards/board_bcm963xx.c +--- linux-2.6.27/arch/mips/bcm63xx/boards/board_bcm963xx.c 2008-10-20 14:24:02.000000000 +0200 ++++ linux-2.6.27.new/arch/mips/bcm63xx/boards/board_bcm963xx.c 2008-10-20 14:28:15.000000000 +0200 +@@ -68,6 +68,30 @@ + * known 6358 boards + */ + #ifdef CONFIG_BCM63XX_CPU_6358 ++static struct board_info __initdata board_96358vw = { ++ .name = "96358VW", ++ .expected_cpu_id = 0x6358, ++ ++ .has_enet0 = 1, ++ .has_enet1 = 1, ++ .has_pci = 1, ++ ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .enet1 = { ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ ++ .has_ohci0 = 1, ++ .has_pccard = 1, ++ .has_ehci0 = 1, ++}; ++ + static struct board_info __initdata board_96358vw2 = { + .name = "96358VW2", + .expected_cpu_id = 0x6358, +@@ -103,6 +127,7 @@ + #endif + + #ifdef CONFIG_BCM63XX_CPU_6358 ++ &board_96358vw, + &board_96358vw2, + #endif + }; diff --git a/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch new file mode 100644 index 0000000..c7c1afd --- /dev/null +++ b/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch @@ -0,0 +1,73 @@ +From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001 +From: Axel Gembe <ago@bastart.eu.org> +Date: Mon, 12 May 2008 18:54:09 +0200 +Subject: [PATCH] bcm963xx: flashmap support + + +Signed-off-by: Axel Gembe <ago@bastart.eu.org> +--- + drivers/mtd/maps/Kconfig | 7 +++++++ + drivers/mtd/maps/Makefile | 1 + + drivers/mtd/redboot.c | 13 ++++++++++--- + 3 files changed, 18 insertions(+), 3 deletions(-) + +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -262,6 +262,13 @@ + Flash memory access on 4G Systems MTX-1 Board. If you have one of + these boards and would like to use the flash chips on it, say 'Y'. + ++config MTD_BCM963XX ++ tristate "BCM963xx Flash device" ++ depends on MIPS && BCM63XX ++ help ++ Flash memory access on BCM963xx boards. Currently only works with ++ RedBoot and CFE. ++ + config MTD_DILNETPC + tristate "CFI Flash device mapped on DIL/Net PC" + depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT +--- a/drivers/mtd/redboot.c ++++ b/drivers/mtd/redboot.c +@@ -39,7 +39,7 @@ + return 1; + } + +-static int parse_redboot_partitions(struct mtd_info *master, ++int parse_redboot_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + unsigned long fis_origin) + { +@@ -161,6 +161,14 @@ + goto out; + } + ++ if (!fis_origin) { ++ for (i = 0; i < numslots; i++) { ++ if (!strncmp(buf[i].name, "RedBoot", 8)) { ++ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); ++ } ++ } ++ } ++ + for (i = 0; i < numslots; i++) { + struct fis_list *new_fl, **prev; + +@@ -183,9 +191,8 @@ + new_fl->img = &buf[i]; + if (fis_origin) { + buf[i].flash_base -= fis_origin; +- } else { +- buf[i].flash_base &= master->size-1; + } ++ buf[i].flash_base &= (master->size << 1) - 1; + + /* I'm sure the JFFS2 code has done me permanent damage. + * I now think the following is _normal_ +--- linux-2.6.27/drivers/mtd/maps/Makefile 2008-10-10 00:13:53.000000000 +0200 ++++ linux-2.6.27.new/drivers/mtd/maps/Makefile 2008-10-20 14:22:52.000000000 +0200 +@@ -65,3 +65,4 @@ + obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o + obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o + obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o ++obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o |