1 files changed, 0 insertions, 145 deletions
diff --git a/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
deleted file mode 100644
index 967c779..0000000
--- a/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From: Marcin Jurkowski <marcin1j@gmail.com>
-Date: Thu, 31 Oct 2013 22:33:10 +0000
-Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
- router
-
-This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
-router.
-It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
-modem equipped with 64 MiB RAM and 8 MiB flash.
-
-Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1466,6 +1466,122 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_FAST2704V2 = {
-+	.name				= "F@ST2704V2",
-+	.expected_cpu_id		= 0x6328,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+	.has_usbd			= 1,
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id = 1,
-+				.name	= "Port 1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.leds = {
-+		/* front LEDs */
-+		{
-+			.name			= "F@ST2704V2:green:power",
-+			.gpio			= 4,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+		{
-+			.name			= "F@ST2704V2:red:power",
-+			.gpio			= 5,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "F@ST2704V2:red:inet",
-+			.gpio			= 2,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "F@ST2704V2:green:dsl",
-+			.gpio			= 3,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "F@ST2704V2:green:inet",
-+			.gpio			= 11,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "F@ST2704V2:green:usb",
-+			.gpio			= 1,
-+			.active_low		= 1,
-+		},
-+
-+		/* side button LEDs */
-+		{
-+			.name			= "F@ST2704V2:green:wps",
-+			.gpio			= 10,
-+			.active_low		= 1,
-+		},
-+
-+		/* FIXME: can't control gpio0 line in "out" state, needs further investigation */
-+		/*
-+		{
-+			.name			= "F@ST2704V2:green:rfkill",
-+			.gpio			= 0,
-+			.active_low		= 1,
-+		},
-+		*/
-+
-+	},
-+	.buttons = {
-+		{
-+			.desc			= "reset",
-+			.gpio			= 23,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "wps",
-+			.gpio			= 24,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WPS_BUTTON,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "rfkill",
-+			.gpio			= 15,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WLAN,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
- 	.name				= "RTA1025W_16",
- 	.expected_cpu_id		= 0x6348,
-@@ -3807,6 +3923,7 @@ static const struct board_info __initcon
- 	&board_963281TAN,
- 	&board_A4001N1,
- 	&board_dsl_274xb_f1,
-+	&board_FAST2704V2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,