summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch')
-rw-r--r--target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch95
1 files changed, 0 insertions, 95 deletions
diff --git a/target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
deleted file mode 100644
index bc35c25..0000000
--- a/target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:43:49 +0200
-Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
-
-Similar to ethernet setup, use a platform data struct for passing
-the mac. This eliminates the requirement to allocate an array on
-stack for the mac passed.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c | 6 ++----
- arch/mips/bcm63xx/sprom.c | 8 ++++----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 4 ++++
- 4 files changed, 17 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -157,7 +157,6 @@ int __init board_register_devices(void)
- int button_count = 0;
- int led_count = 0;
- int usbh_ports = 0;
-- u8 mac[ETH_ALEN];
-
- if (board.has_uart0)
- bcm63xx_uart_register(0);
-@@ -203,8 +202,8 @@ int __init board_register_devices(void)
- * do this after registering enet devices
- */
-
-- if (board_get_mac_address(mac) ||
-- bcm63xx_register_fallback_sprom(mac))
-+ if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+ bcm63xx_register_fallback_sprom(&board.fallback_sprom))
- pr_err(PFX "failed to register fallback SPROM\n");
-
- bcm63xx_spi_register();
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
- }
- #endif
-
--int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
- int ret = 0;
-
- #ifdef CONFIG_SSB_PCIHOST
-- memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
-- memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
-- memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+ memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-+ memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-+ memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-
- ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -1,6 +1,12 @@
- #ifndef __BCM63XX_FALLBACK_SPROM
- #define __BCM63XX_FALLBACK_SPROM
-
--int bcm63xx_register_fallback_sprom(u8 *mac);
-+#include <linux/if_ether.h>
-+
-+struct fallback_sprom_data {
-+ u8 mac_addr[ETH_ALEN];
-+};
-+
-+int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
-
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -8,6 +8,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_fallback_sprom.h>
-
- /*
- * flash mapping
-@@ -59,6 +60,9 @@ struct board_info {
- /* External PHY reset GPIO flags from gpio.h */
- unsigned long ephy_reset_gpio_flags;
-
-+ /* fallback sprom config */
-+ struct fallback_sprom_data fallback_sprom;
-+
- /* Additional platform devices */
- struct platform_device **devs;
- unsigned int num_devs;