diff options
Diffstat (limited to 'target/linux/brcm63xx')
5 files changed, 79 insertions, 2 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network index 087bce9..b4ab46d 100755 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network @@ -28,6 +28,7 @@ SPW500V) 96338W2_E7T |\ 96348A-122 |\ 96348W3 |\ +AR1004G |\ CPVA642 |\ CT536_CT5621 |\ CT6373-1 |\ diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index afe9624..1d9b448 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -57,6 +57,10 @@ brcm63xx_detect() { brcm63xx_has_reset_button="true" ifname=eth1 ;; + AR1004G) + status_led="AR1004G:green:power" + brcm63xx_has_reset_button="true" + ;; CVG834G_E15R3921) status_led="CVG834G:green:power" ifname=eth0 diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index e0bcb07..ecdceca 100755 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -190,6 +190,8 @@ define Image/Build $(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic) $(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic) + # Asmax AR 1004g + $(call Image/Build/CFEFIXUP,$(1),96348GW-10,AR1004G,6348,AR1004G) # BT Voyager V210_BTR $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5) # BT Voyager V210_ROI, V210_WB diff --git a/target/linux/brcm63xx/patches-3.10/558-board_AR1004G.patch b/target/linux/brcm63xx/patches-3.10/558-board_AR1004G.patch new file mode 100644 index 0000000..4fb76ed --- /dev/null +++ b/target/linux/brcm63xx/patches-3.10/558-board_AR1004G.patch @@ -0,0 +1,70 @@ +From: "mexit@o2.pl" <mexit@o2.pl> +Date: Sun, 24 Nov 2013 21:33:38 +0000 +Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router + +Support for Asmax AR 1004g router + +Signed-off-by: Adrian Feliks <mexit@o2.pl> +--- +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2208,6 +2208,51 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_96348gw_10_AR1004G = { ++ .name = "AR1004G", ++ .expected_cpu_id = 0x6348, ++ ++ .has_uart0 = 1, ++ .has_enet1 = 1, ++ .has_pci = 1, ++ ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .leds = { ++ { ++ .name = "AR1004G:green:inet", ++ .gpio = 3, ++ .active_low = 1, ++ }, ++ { ++ .name = "AR1004G:green:power", ++ .gpio = 0, ++ .active_low = 1, ++ }, ++ { ++ .name = "AR1004G:red:power", ++ .gpio = 6, ++ .active_low = 1, ++ }, ++ }, ++ ++ .buttons = { ++ { ++ .desc = "reset", ++ .gpio = 33, ++ .active_low = 1, ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, ++ }, ++ }, ++}; ++ + #endif + + /* +@@ -4457,6 +4502,7 @@ static const struct board_info __initcon + &board_96348A_122, + &board_CPVA502plus, + &board_96348W3, ++ &board_96348gw_10_AR1004G, + #endif + + #ifdef CONFIG_BCM63XX_CPU_6358 diff --git a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch index 7ed27a6..620bf40 100644 --- a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch +++ b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch @@ -8,7 +8,7 @@ #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/spi/74x164.h> -@@ -4499,7 +4500,7 @@ static const struct board_info __initcon +@@ -4545,7 +4546,7 @@ static const struct board_info __initcon * bcm4318 WLAN work */ #ifdef CONFIG_SSB_PCIHOST @@ -17,7 +17,7 @@ .revision = 0x02, .board_rev = 0x17, .country_code = 0x0, -@@ -4519,6 +4520,7 @@ static struct ssb_sprom bcm63xx_sprom = +@@ -4565,6 +4566,7 @@ static struct ssb_sprom bcm63xx_sprom = .boardflags_lo = 0x2848, .boardflags_hi = 0x0000, }; |