diff options
Diffstat (limited to 'target/linux/brcm63xx')
15 files changed, 0 insertions, 1225 deletions
diff --git a/target/linux/brcm63xx/config-2.6.27 b/target/linux/brcm63xx/config-2.6.27 deleted file mode 100644 index a9881d7..0000000 --- a/target/linux/brcm63xx/config-2.6.27 +++ /dev/null @@ -1,205 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_AUDIT=y -CONFIG_AUDIT_GENERIC=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BCM63XX=y -CONFIG_BCM63XX_CPU_6338=y -CONFIG_BCM63XX_CPU_6345=y -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BCM63XX_ENET=y -CONFIG_BCM63XX_PHY=y -CONFIG_BCM63XX_WDT=y -CONFIG_BITREVERSE=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_BOARD_BCM963XX=y -# CONFIG_BOARD_LIVEBOX is not set -# CONFIG_BSD_DISKLABEL is not set -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRAMFS=y -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVICE=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_CLK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_IRQ_CPU=y -# CONFIG_ISDN is not set -CONFIG_KEXEC=y -CONFIG_LBD=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_FPU_EMU is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_BCM963XX=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_NATSEMI is not set -# CONFIG_NO_IOPORT is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -CONFIG_POSIX_MQUEUE=y -# CONFIG_PROBE_INITRD_HEADER is not set -# CONFIG_R6040 is not set -CONFIG_RELAY=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SQUASHFS_VMALLOC=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SPROM=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TICK_ONESHOT=y -CONFIG_TRAD_SIGNALS=y -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_SUPPORT=y -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm63xx/config-2.6.28 b/target/linux/brcm63xx/config-2.6.28 deleted file mode 100644 index ba47697..0000000 --- a/target/linux/brcm63xx/config-2.6.28 +++ /dev/null @@ -1,203 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_AUDIT=y -CONFIG_AUDIT_GENERIC=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BCM63XX=y -CONFIG_BCM63XX_CPU_6338=y -CONFIG_BCM63XX_CPU_6345=y -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BCM63XX_ENET=y -CONFIG_BCM63XX_PHY=y -CONFIG_BCM63XX_WDT=y -CONFIG_BITREVERSE=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_BOARD_BCM963XX=y -# CONFIG_BOARD_LIVEBOX is not set -# CONFIG_BSD_DISKLABEL is not set -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRAMFS=y -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVICE=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_IRQ_CPU=y -# CONFIG_ISDN is not set -CONFIG_KEXEC=y -CONFIG_LBD=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_EMMA is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_FPU_EMU is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_BCM963XX=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_NATSEMI is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -CONFIG_POSIX_MQUEUE=y -# CONFIG_PROBE_INITRD_HEADER is not set -# CONFIG_R6040 is not set -CONFIG_RELAY=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SQUASHFS_VMALLOC=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -# CONFIG_SSB_DRIVER_MIPS is not set -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SPROM=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TICK_ONESHOT=y -CONFIG_TRAD_SIGNALS=y -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_SUPPORT=y -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm63xx/patches-2.6.27/001-add_broadcom_63xx_cpu_definitions.patch b/target/linux/brcm63xx/patches-2.6.27/001-add_broadcom_63xx_cpu_definitions.patch deleted file mode 100644 index 163f8be..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/001-add_broadcom_63xx_cpu_definitions.patch +++ /dev/null @@ -1,100 +0,0 @@ -From a9f65413f9ea81ef2208da66a3db9cb8a9020eef Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Fri, 18 Jul 2008 15:53:08 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add Broadcom 63xx CPU definitions. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/kernel/cpu-probe.c | 25 +++++++++++++++++++++++++ - arch/mips/mm/tlbex.c | 4 ++++ - include/asm-mips/cpu.h | 7 +++++++ - 3 files changed, 36 insertions(+), 0 deletions(-) - ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -153,6 +153,9 @@ void __init check_wait(void) - case CPU_25KF: - case CPU_PR4450: - case CPU_BCM3302: -+ case CPU_BCM6338: -+ case CPU_BCM6348: -+ case CPU_BCM6358: - cpu_wait = r4k_wait; - break; - -@@ -802,11 +805,28 @@ static inline void cpu_probe_broadcom(st - decode_configs(c); - switch (c->processor_id & 0xff00) { - case PRID_IMP_BCM3302: -+ /* same as PRID_IMP_BCM6338 */ - c->cputype = CPU_BCM3302; - break; - case PRID_IMP_BCM4710: - c->cputype = CPU_BCM4710; - break; -+ case PRID_IMP_BCM6345: -+ c->cputype = CPU_BCM6345; -+ break; -+ case PRID_IMP_BCM6348: -+ c->cputype = CPU_BCM6348; -+ break; -+ case PRID_IMP_BCM4350: -+ switch (c->processor_id & 0xf0) { -+ case PRID_REV_BCM6358: -+ c->cputype = CPU_BCM6358; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+ break; - default: - c->cputype = CPU_UNKNOWN; - break; -@@ -892,6 +912,10 @@ static __cpuinit const char *cpu_to_name - case CPU_SR71000: name = "Sandcraft SR71000"; break; - case CPU_BCM3302: name = "Broadcom BCM3302"; break; - case CPU_BCM4710: name = "Broadcom BCM4710"; break; -+ case CPU_BCM6338: name = "Broadcom BCM6338"; break; -+ case CPU_BCM6345: name = "Broadcom BCM6345"; break; -+ case CPU_BCM6348: name = "Broadcom BCM6348"; break; -+ case CPU_BCM6358: name = "Broadcom BCM6358"; break; - case CPU_PR4450: name = "Philips PR4450"; break; - case CPU_LOONGSON2: name = "ICT Loongson-2"; break; - default: ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -317,6 +317,10 @@ static void __cpuinit build_tlb_write_en - case CPU_BCM3302: - case CPU_BCM4710: - case CPU_LOONGSON2: -+ case CPU_BCM6338: -+ case CPU_BCM6345: -+ case CPU_BCM6348: -+ case CPU_BCM6358: - if (m4kc_tlbp_war()) - uasm_i_nop(p); - tlbw(p); ---- a/include/asm-mips/cpu.h -+++ b/include/asm-mips/cpu.h -@@ -112,6 +112,12 @@ - - #define PRID_IMP_BCM4710 0x4000 - #define PRID_IMP_BCM3302 0x9000 -+#define PRID_IMP_BCM6338 0x9000 -+#define PRID_IMP_BCM6345 0x8000 -+#define PRID_IMP_BCM6348 0x9100 -+#define PRID_IMP_BCM4350 0xA000 -+#define PRID_REV_BCM6358 0x0010 -+#define PRID_REV_BCM6368 0x0030 - - /* - * Definitions for 7:0 on legacy processors -@@ -198,6 +204,7 @@ enum cpu_type_enum { - CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, - CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, - CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710, -+ CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358, - - /* - * MIPS64 class processors diff --git a/target/linux/brcm63xx/patches-2.6.27/002-add_support_for_broadcom_63xx_cpus.patch b/target/linux/brcm63xx/patches-2.6.27/002-add_support_for_broadcom_63xx_cpus.patch deleted file mode 100644 index af494f4..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/002-add_support_for_broadcom_63xx_cpus.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 0713aadd2a4e543b69022aa40bdec3e1dc5bc1e5 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Mon, 18 Aug 2008 13:56:57 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add support for Broadcom 63xx CPUs. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/Kconfig | 16 + - arch/mips/Makefile | 7 + - arch/mips/bcm63xx/Kconfig | 9 + - arch/mips/bcm63xx/Makefile | 2 + - arch/mips/bcm63xx/clk.c | 220 ++++++ - arch/mips/bcm63xx/cpu.c | 245 +++++++ - arch/mips/bcm63xx/cs.c | 144 ++++ - arch/mips/bcm63xx/early_printk.c | 30 + - arch/mips/bcm63xx/gpio.c | 98 +++ - arch/mips/bcm63xx/irq.c | 253 +++++++ - arch/mips/bcm63xx/prom.c | 43 ++ - arch/mips/bcm63xx/setup.c | 108 +++ - arch/mips/bcm63xx/timer.c | 205 ++++++ - include/asm-mips/fixmap.h | 4 + - include/asm-mips/mach-bcm63xx/bcm63xx_clk.h | 11 + - include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h | 314 +++++++++ - include/asm-mips/mach-bcm63xx/bcm63xx_cs.h | 10 + - include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h | 14 + - include/asm-mips/mach-bcm63xx/bcm63xx_io.h | 93 +++ - include/asm-mips/mach-bcm63xx/bcm63xx_irq.h | 15 + - include/asm-mips/mach-bcm63xx/bcm63xx_regs.h | 728 ++++++++++++++++++++ - include/asm-mips/mach-bcm63xx/bcm63xx_timer.h | 11 + - .../asm-mips/mach-bcm63xx/cpu-feature-overrides.h | 51 ++ - include/asm-mips/mach-bcm63xx/gpio.h | 52 ++ - include/asm-mips/mach-bcm63xx/war.h | 25 + - 25 files changed, 2708 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/Kconfig - create mode 100644 arch/mips/bcm63xx/Makefile - create mode 100644 arch/mips/bcm63xx/clk.c - create mode 100644 arch/mips/bcm63xx/cpu.c - create mode 100644 arch/mips/bcm63xx/cs.c - create mode 100644 arch/mips/bcm63xx/early_printk.c - create mode 100644 arch/mips/bcm63xx/gpio.c - create mode 100644 arch/mips/bcm63xx/irq.c - create mode 100644 arch/mips/bcm63xx/prom.c - create mode 100644 arch/mips/bcm63xx/setup.c - create mode 100644 arch/mips/bcm63xx/timer.c - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_clk.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_cs.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_io.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_irq.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_regs.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_timer.h - create mode 100644 include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h - create mode 100644 include/asm-mips/mach-bcm63xx/gpio.h - create mode 100644 include/asm-mips/mach-bcm63xx/war.h - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -59,6 +59,21 @@ config BCM47XX - help - Support for BCM47XX based boards - -+config BCM63XX -+ bool "Broadcom 63xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select SWAP_IO_SPACE -+ select ARCH_REQUIRE_GPIOLIB -+ help -+ Support for BCM63XX based boards -+ - config MIPS_COBALT - bool "Cobalt Server" - select CEVT_R4K -@@ -600,6 +615,7 @@ endchoice - - source "arch/mips/au1000/Kconfig" - source "arch/mips/basler/excite/Kconfig" -+source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" - source "arch/mips/lasat/Kconfig" - source "arch/mips/pmc-sierra/Kconfig" ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -540,6 +540,13 @@ cflags-$(CONFIG_BCM47XX) += -Iinclude/as - load-$(CONFIG_BCM47XX) := 0xffffffff80001000 - - # -+# Broadcom BCM63XX boards -+# -+core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/ -+cflags-$(CONFIG_BCM63XX) += -Iinclude/asm-mips/mach-bcm63xx/ -+load-$(CONFIG_BCM63XX) := 0xffffffff80010000 -+ -+# - # SNI RM - # - core-$(CONFIG_SNI_RM) += arch/mips/sni/ ---- a/include/asm-mips/fixmap.h -+++ b/include/asm-mips/fixmap.h -@@ -67,11 +67,15 @@ enum fixed_addresses { - * the start of the fixmap, and leave one page empty - * at the top of mem.. - */ -+#ifdef CONFIG_BCM63XX -+#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000) -+#else - #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX) - #define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000)) - #else - #define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) - #endif -+#endif - #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) - #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) - diff --git a/target/linux/brcm63xx/patches-2.6.27/003-add_serial_driver_for_bcm63xx_integr.patch b/target/linux/brcm63xx/patches-2.6.27/003-add_serial_driver_for_bcm63xx_integr.patch deleted file mode 100644 index c998b00..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/003-add_serial_driver_for_bcm63xx_integr.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 6c489656b09998ed6a6f857e01ccf630e29358dd Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Fri, 18 Jul 2008 19:35:55 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add serial driver for bcm63xx integrated UART. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-uart.c | 41 + - drivers/serial/Kconfig | 19 + - drivers/serial/Makefile | 1 + - drivers/serial/bcm63xx_uart.c | 890 ++++++++++++++++++++++ - include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h | 6 + - include/linux/serial_core.h | 2 + - 7 files changed, 960 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-uart.c - create mode 100644 drivers/serial/bcm63xx_uart.c - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h - ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -1421,4 +1421,23 @@ config SPORT_BAUD_RATE - default 19200 if (SERIAL_SPORT_BAUD_RATE_19200) - default 9600 if (SERIAL_SPORT_BAUD_RATE_9600) - -+config SERIAL_BCM63XX -+ tristate "bcm63xx serial port support" -+ select SERIAL_CORE -+ depends on BCM63XX -+ help -+ If you have a bcm63xx CPU, you can enable its onboard -+ serial port by enabling this options. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called bcm963xx_uart. -+ -+config SERIAL_BCM63XX_CONSOLE -+ bool "Console on bcm63xx serial port" -+ depends on SERIAL_BCM63XX -+ select SERIAL_CORE_CONSOLE -+ help -+ If you have enabled the serial port on the bcm63xx CPU -+ you can make it the console by answering Y to this option. -+ - endmenu ---- a/drivers/serial/Makefile -+++ b/drivers/serial/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711 - obj-$(CONFIG_SERIAL_PXA) += pxa.o - obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o - obj-$(CONFIG_SERIAL_SA1100) += sa1100.o -+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o - obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o - obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o - obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -155,6 +155,8 @@ - - #define PORT_SC26XX 82 - -+#define PORT_BCM63XX 83 -+ - #ifdef __KERNEL__ - - #include <linux/compiler.h> diff --git a/target/linux/brcm63xx/patches-2.6.27/004_add_pci_support.patch b/target/linux/brcm63xx/patches-2.6.27/004_add_pci_support.patch deleted file mode 100644 index 47390f3..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/004_add_pci_support.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 2a7fa2dbbf68650644f807a50cc2d84ca30835c1 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Sun, 21 Sep 2008 04:47:13 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add PCI support. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 2 + - arch/mips/bcm63xx/setup.c | 2 + - arch/mips/pci/Makefile | 2 + - arch/mips/pci/fixup-bcm63xx.c | 21 +++ - arch/mips/pci/ops-bcm63xx.c | 179 +++++++++++++++++++++++ - arch/mips/pci/pci-bcm63xx.c | 178 ++++++++++++++++++++++ - arch/mips/pci/pci-bcm63xx.h | 27 ++++ - include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h | 6 + - 8 files changed, 417 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/pci/fixup-bcm63xx.c - create mode 100644 arch/mips/pci/ops-bcm63xx.c - create mode 100644 arch/mips/pci/pci-bcm63xx.c - create mode 100644 arch/mips/pci/pci-bcm63xx.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h - ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o - obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o - obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o - obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o -+obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ -+ ops-bcm63xx.o - - # - # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/brcm63xx/patches-2.6.27/006-pcmcia_cardbus_support.patch b/target/linux/brcm63xx/patches-2.6.27/006-pcmcia_cardbus_support.patch deleted file mode 100644 index 5812912..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/006-pcmcia_cardbus_support.patch +++ /dev/null @@ -1,43 +0,0 @@ -From b17597be763621ba63534fda6e1ea0a802be2087 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Fri, 18 Jul 2008 21:18:51 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add PCMCIA & Cardbus support. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-pcmcia.c | 135 +++++ - drivers/pcmcia/Kconfig | 4 + - drivers/pcmcia/Makefile | 1 + - drivers/pcmcia/bcm63xx_pcmcia.c | 521 ++++++++++++++++++++ - drivers/pcmcia/bcm63xx_pcmcia.h | 65 +++ - include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h | 13 + - 7 files changed, 740 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-pcmcia.c - create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.c - create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h - ---- a/drivers/pcmcia/Kconfig -+++ b/drivers/pcmcia/Kconfig -@@ -196,6 +196,10 @@ config PCMCIA_AU1X00 - tristate "Au1x00 pcmcia support" - depends on SOC_AU1X00 && PCMCIA - -+config PCMCIA_BCM63XX -+ tristate "bcm63xx pcmcia support" -+ depends on BCM63XX && PCMCIA -+ - config PCMCIA_SA1100 - tristate "SA1100 support" - depends on ARM && ARCH_SA1100 && PCMCIA ---- a/drivers/pcmcia/Makefile -+++ b/drivers/pcmcia/Makefile -@@ -33,6 +33,7 @@ obj-$(CONFIG_PCMCIA_PXA2XX) - obj-$(CONFIG_M32R_PCC) += m32r_pcc.o - obj-$(CONFIG_M32R_CFC) += m32r_cfc.o - obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o -+obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o - obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o - obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o - obj-$(CONFIG_OMAP_CF) += omap_cf.o diff --git a/target/linux/brcm63xx/patches-2.6.27/007-usb_ohci_support.patch b/target/linux/brcm63xx/patches-2.6.27/007-usb_ohci_support.patch deleted file mode 100644 index e41d1c5..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/007-usb_ohci_support.patch +++ /dev/null @@ -1,56 +0,0 @@ -From f7416412febd7efc1d33c7506c81265719368667 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Mon, 21 Jul 2008 14:58:19 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add USB OHCI support. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 6 + - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-usb-ohci.c | 50 ++++++ - drivers/usb/host/ohci-bcm63xx.c | 159 ++++++++++++++++++++ - drivers/usb/host/ohci-hcd.c | 5 + - drivers/usb/host/ohci.h | 7 +- - .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 + - 7 files changed, 233 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c - create mode 100644 drivers/usb/host/ohci-bcm63xx.c - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h - ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1050,6 +1050,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER usb_hcd_pnx4008_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ohci-bcm63xx.c" -+#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver -+#endif -+ - #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) ---- a/drivers/usb/host/ohci.h -+++ b/drivers/usb/host/ohci.h -@@ -549,6 +549,11 @@ static inline struct usb_hcd *ohci_to_hc - #define writel_be(val, addr) out_be32((__force unsigned *)addr, val) - #endif - -+#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX) -+#define readl_be(addr) __raw_readl((__force unsigned *)addr) -+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) -+#endif -+ - static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, - __hc32 __iomem * regs) - { -@@ -654,7 +659,7 @@ static inline u32 hc32_to_cpup (const st - * some big-endian SOC implementations. Same thing happens with PSW access. - */ - --#ifdef CONFIG_PPC_MPC52xx -+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX) - #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) - #else - #define big_endian_frame_no_quirk(ohci) 0 diff --git a/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch b/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch deleted file mode 100644 index b656a2c..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 2940d1996c86c4c4dd7a82214f846d0c0b707165 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Mon, 21 Jul 2008 18:24:42 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add USB EHCI support. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Kconfig | 2 + - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-usb-ehci.c | 50 +++++++ - drivers/usb/host/ehci-bcm63xx.c | 152 ++++++++++++++++++++ - drivers/usb/host/ehci-hcd.c | 5 + - drivers/usb/host/ehci.h | 5 + - .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 + - 7 files changed, 221 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c - create mode 100644 drivers/usb/host/ehci-bcm63xx.c - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h - ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1041,6 +1041,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ixp4xx_ehci_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ehci-bcm63xx.c" -+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) - #error "missing bus glue for ehci-hcd" ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -764,6 +764,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u - #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) - #endif - -+#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX) -+#define readl_be(addr) __raw_readl((__force unsigned *)addr) -+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) -+#endif -+ - static inline unsigned int ehci_readl(const struct ehci_hcd *ehci, - __u32 __iomem * regs) - { ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -44,7 +44,7 @@ config USB_EHCI_HCD - - config USB_EHCI_ROOT_HUB_TT - bool "Root Hub Transaction Translators" -- depends on USB_EHCI_HCD -+ depends on USB_EHCI_HCD && !BCM63XX - ---help--- - Some EHCI chips have vendor-specific extensions to integrate - transaction translators, so that no OHCI or UHCI companion diff --git a/target/linux/brcm63xx/patches-2.6.27/009-add_integrated_ethernet_mac_support.patch b/target/linux/brcm63xx/patches-2.6.27/009-add_integrated_ethernet_mac_support.patch deleted file mode 100644 index fcb045b..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/009-add_integrated_ethernet_mac_support.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 49aa7ffcd9bd2d9a0af99fced7b8511160dbf345 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Sun, 21 Sep 2008 03:43:26 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet mac support. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-enet.c | 158 ++ - drivers/net/Kconfig | 9 + - drivers/net/Makefile | 1 + - drivers/net/bcm63xx_enet.c | 1894 ++++++++++++++++++++++ - drivers/net/bcm63xx_enet.h | 294 ++++ - include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h | 45 + - 7 files changed, 2402 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-enet.c - create mode 100644 drivers/net/bcm63xx_enet.c - create mode 100644 drivers/net/bcm63xx_enet.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h - ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -1963,6 +1963,15 @@ config NE_H8300 - Say Y here if you want to use the NE2000 compatible - controller on the Renesas H8/300 processor. - -+config BCM63XX_ENET -+ tristate "Broadcom 63xx internal mac support" -+ depends on BCM63XX -+ select MII -+ select PHYLIB -+ help -+ This driver supports the ethernet MACs in the Broadcom 63xx -+ MIPS chipset family (BCM63XX). -+ - source "drivers/net/fs_enet/Kconfig" - - endif # NET_ETHERNET ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -123,6 +123,7 @@ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o - obj-$(CONFIG_B44) += b44.o - obj-$(CONFIG_FORCEDETH) += forcedeth.o - obj-$(CONFIG_NE_H8300) += ne-h8300.o -+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o - obj-$(CONFIG_AX88796) += ax88796.o - - obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o diff --git a/target/linux/brcm63xx/patches-2.6.27/010-add_integrated_ethernet_phy_support.patch b/target/linux/brcm63xx/patches-2.6.27/010-add_integrated_ethernet_phy_support.patch deleted file mode 100644 index b2eace1..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/010-add_integrated_ethernet_phy_support.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 7eefcb968019804e024c8243e28afb1eebd674a2 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon <mbizon@freebox.fr> -Date: Sun, 21 Sep 2008 02:20:53 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib. - -Signed-off-by: Maxime Bizon <mbizon@freebox.fr> ---- - drivers/net/phy/Kconfig | 6 ++ - drivers/net/phy/Makefile | 1 + - drivers/net/phy/bcm63xx.c | 132 +++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 139 insertions(+), 0 deletions(-) - create mode 100644 drivers/net/phy/bcm63xx.c - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -62,6 +62,12 @@ config BROADCOM_PHY - Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481 - and BCM5482 PHYs. - -+config BCM63XX_PHY -+ tristate "Drivers for Broadcom 63xx SOCs internal PHY" -+ depends on BCM63XX -+ ---help--- -+ Currently supports the 6348 and 6358 PHYs. -+ - config ICPLUS_PHY - tristate "Drivers for ICPlus PHYs" - ---help--- ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o - obj-$(CONFIG_SMSC_PHY) += smsc.o - obj-$(CONFIG_VITESSE_PHY) += vitesse.o - obj-$(CONFIG_BROADCOM_PHY) += broadcom.o -+obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o - obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o diff --git a/target/linux/brcm63xx/patches-2.6.27/020-watchdog.patch b/target/linux/brcm63xx/patches-2.6.27/020-watchdog.patch deleted file mode 100644 index 0df5882..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/020-watchdog.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o - - # PARISC Architecture - ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -704,6 +704,16 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config BCM63XX_WDT -+ tristate "Broadcom BCM63xx hardware watchdog" -+ depends on BCM63XX -+ help -+ Watchdog driver for the built in watchdog hardware in Broadcom -+ BCM63xx SoC. -+ -+ To compile thi driver as a loadable module, choose M here. -+ The module will be called bcm63xx_wdt. -+ - # PARISC Architecture - - # POWERPC Architecture diff --git a/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch deleted file mode 100644 index 7c7fd94..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch +++ /dev/null @@ -1,73 +0,0 @@ -From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001 -From: Axel Gembe <ago@bastart.eu.org> -Date: Mon, 12 May 2008 18:54:09 +0200 -Subject: [PATCH] bcm963xx: flashmap support - - -Signed-off-by: Axel Gembe <ago@bastart.eu.org> ---- - drivers/mtd/maps/Kconfig | 7 +++++++ - drivers/mtd/maps/Makefile | 1 + - drivers/mtd/redboot.c | 13 ++++++++++--- - 3 files changed, 18 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -257,6 +257,13 @@ config MTD_ALCHEMY - help - Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards - -+config MTD_BCM963XX -+ tristate "BCM963xx Flash device" -+ depends on MIPS && BCM63XX -+ help -+ Flash memory access on BCM963xx boards. Currently only works with -+ RedBoot and CFE. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc - return 1; - } - --static int parse_redboot_partitions(struct mtd_info *master, -+int parse_redboot_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long fis_origin) - { -@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru - goto out; - } - -+ if (!fis_origin) { -+ for (i = 0; i < numslots; i++) { -+ if (!strncmp(buf[i].name, "RedBoot", 8)) { -+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); -+ } -+ } -+ } -+ - for (i = 0; i < numslots; i++) { - struct fis_list *new_fl, **prev; - -@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru - new_fl->img = &buf[i]; - if (fis_origin) { - buf[i].flash_base -= fis_origin; -- } else { -- buf[i].flash_base &= master->size-1; - } -+ buf[i].flash_base &= (master->size << 1) - 1; - - /* I'm sure the JFFS2 code has done me permanent damage. - * I now think the following is _normal_ ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -65,3 +65,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o - obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o - obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o - obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o -+obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o diff --git a/target/linux/brcm63xx/patches-2.6.27/050-spi.patch b/target/linux/brcm63xx/patches-2.6.27/050-spi.patch deleted file mode 100644 index fe3c430..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/050-spi.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -217,6 +217,13 @@ config SPI_XILINX - See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" - Product Specification document (DS464) for hardware details. - -+config SPI_BCM63XX -+ tristate "Broadcom BCM63xx SPI controller" -+ depends on BCM63XX -+ select SPI_BITBANG -+ help -+ SPI driver for the Broadcom BCM63xx SPI controller. -+ - # - # Add new SPI master controllers in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x - obj-$(CONFIG_SPI_TXX9) += spi_txx9.o - obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o - obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o -+obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o - # ... add above this line ... - - # SPI protocol drivers (device/link on bus) diff --git a/target/linux/brcm63xx/patches-2.6.27/500-lzma_initramfs.patch b/target/linux/brcm63xx/patches-2.6.27/500-lzma_initramfs.patch deleted file mode 100644 index ad30e94..0000000 --- a/target/linux/brcm63xx/patches-2.6.27/500-lzma_initramfs.patch +++ /dev/null @@ -1,125 +0,0 @@ ---- a/init/initramfs.c -+++ b/init/initramfs.c -@@ -6,6 +6,7 @@ - #include <linux/delay.h> - #include <linux/string.h> - #include <linux/syscalls.h> -+#include <linux/vmalloc.h> - - static __initdata char *message; - static void __init error(char *x) -@@ -423,6 +424,69 @@ static void __init flush_window(void) - outcnt = 0; - } - -+#include <linux/LzmaDecode.h> -+static int __init lzma_unzip(void) -+{ -+ unsigned int i; /* temp value */ -+ unsigned int lc; /* literal context bits */ -+ unsigned int lp; /* literal pos state bits */ -+ unsigned int pb; /* pos state bits */ -+ unsigned int osize; /* uncompressed size */ -+ unsigned char *workspace; -+ unsigned char* outputbuffer; -+ unsigned int outsizeProcessed = 0; -+ int workspace_size; -+ int res; -+ -+ // lzma args -+ i = get_byte(); -+ lc = i % 9, i = i / 9; -+ lp = i % 5, pb = i / 5; -+ -+ // skip dictionary size -+ for (i = 0; i < 4; i++) -+ get_byte(); -+ -+ /* read the lower half of uncompressed size in the header */ -+ osize = ((unsigned int)get_byte()) + -+ ((unsigned int)get_byte() << 8) + -+ ((unsigned int)get_byte() << 16) + -+ ((unsigned int)get_byte() << 24); -+ -+ /* skip rest of the header (upper half of uncompressed size) */ -+ for (i = 0; i < 4; i++) -+ get_byte(); -+ -+ workspace_size = ((LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb)) + 100; -+ printk( KERN_NOTICE "initramfs: LZMA lc=%d,lp=%d,pb=%d,origSize=%d\n", -+ lc,lp,pb,osize); -+ outputbuffer = vmalloc(osize); -+ if (outputbuffer == 0) { -+ printk(KERN_ERR "initramfs: Couldn't allocate lzma output buffer\n"); -+ return -1; -+ } -+ -+ workspace = vmalloc(workspace_size); -+ if (workspace == NULL) { -+ printk(KERN_ERR "initramfs: Couldn't allocate lzma workspace\n"); -+ return -1; -+ } -+ -+ res = LzmaDecode(workspace, workspace_size, lc, lp, pb, inbuf + inptr, insize - inptr, outputbuffer, osize, &outsizeProcessed); -+ if( res != 0 ) { -+ panic( KERN_ERR "initramfs: Lzma decode failure\n"); -+ return -1; -+ } -+ -+ flush_buffer(outputbuffer, outsizeProcessed); -+ inptr = insize; -+ -+ vfree(outputbuffer); -+ vfree(workspace); -+ state = Reset; -+ return 0; -+} -+ - static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) - { - int written; -@@ -457,12 +521,28 @@ static char * __init unpack_to_rootfs(ch - inptr = 0; - outcnt = 0; /* bytes in output buffer */ - bytes_out = 0; -- crc = (ulg)0xffffffffL; /* shift register contents */ -- makecrc(); -- gunzip(); -- if (state != Reset) -+ if( inbuf[0] == 037 && ((inbuf[1] == 0213) || (inbuf[1] == 0236))) -+ { -+ printk( KERN_NOTICE "detected gzip initramfs\n"); -+ crc = (ulg)0xffffffffL; /* shift register contents */ -+ makecrc(); -+ gunzip(); -+ if (state != Reset) - error("junk in gzipped archive"); -- this_header = saved_offset + inptr; -+ } -+ else if(!memcmp(inbuf+1, "\x00\x00\x80\x00", 4)) /* FIXME: hardcoded dictionary size */ -+ { -+ printk( KERN_NOTICE "detected lzma initramfs\n"); -+ lzma_unzip(); -+ } -+ else -+ { -+ // skip forward ? -+ crc = (ulg)0xffffffffL; /* shift register contents */ -+ makecrc(); -+ gunzip(); -+ } -+ this_header = saved_offset + inptr; - buf += inptr; - len -= inptr; - } ---- a/scripts/gen_initramfs_list.sh -+++ b/scripts/gen_initramfs_list.sh -@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then - if [ "${is_cpio_compressed}" = "compressed" ]; then - cat ${cpio_tfile} > ${output_file} - else -- cat ${cpio_tfile} | gzip -f -9 - > ${output_file} -+ lzma e -lc1 -lp2 -pb2 ${cpio_tfile} ${output_file} - fi - [ -z ${cpio_file} ] && rm ${cpio_tfile} - fi |