summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx')
-rw-r--r--target/linux/brcm63xx/base-files/etc/diag.sh3
-rw-r--r--target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds3
-rw-r--r--target/linux/brcm63xx/base-files/etc/uci-defaults/02_network1
-rwxr-xr-xtarget/linux/brcm63xx/base-files/lib/brcm63xx.sh3
-rw-r--r--target/linux/brcm63xx/dts/fast2704n.dts84
-rwxr-xr-xtarget/linux/brcm63xx/image/Makefile2
-rw-r--r--target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch65
-rw-r--r--target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch65
-rw-r--r--target/linux/brcm63xx/profiles/sagem.mk10
9 files changed, 236 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index 1b0d26d..7916ac2 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -70,6 +70,9 @@ set_state() {
fast2504n)
status_led="fast2504n:green:ok"
;;
+ fast2704n)
+ status_led2="F@ST2704N:red:power"
+ ;;
fast2704v2)
status_led="F@ST2704V2:green:power"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index b964bdb..bdb3dad 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -22,6 +22,9 @@ dgnd3700v1_dgnd3800b)
ucidef_set_led_usbdev "usb1" "USB1" "DGND3700v1_3800B:green:usb-back" "1-1"
ucidef_set_led_usbdev "usb2" "USB2" "DGND3700v1_3800B:green:usb-front" "1-2"
;;
+fast2704n)
+ ucidef_set_led_netdev "wan" "WAN" "F@ST2704N:green:inet" "eth0.2"
+ ;;
fast2704v2)
ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index e5880eb..2ff9e45 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -114,6 +114,7 @@ wap-5831n)
ucidef_add_switch_vlan "eth0" "2" "4 5t"
;;
+fast2704n |\
dgnd3700v1_dgnd3800b)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "eth0" "1" "1"
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 0eb9a75..92fa5f2 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -198,6 +198,9 @@ brcm63xx_dt_detect() {
"Sagem F@ST2604")
board_name="fast2604"
;;
+ "Sagem F@ST2704N")
+ board_name="fast2704n"
+ ;;
"Sagem F@ST2704V2")
board_name="fast2704v2"
;;
diff --git a/target/linux/brcm63xx/dts/fast2704n.dts b/target/linux/brcm63xx/dts/fast2704n.dts
new file mode 100644
index 0000000..232d4d1
--- /dev/null
+++ b/target/linux/brcm63xx/dts/fast2704n.dts
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sagem F@ST2704N";
+ compatible = "sagem,f@st2704n", "brcm,bcm6318";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ wlan {
+ label = "wlan";
+ gpios = <&gpio0 1 0>;
+ linux,code = <KEY_WLAN>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio1 1 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 1>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wps_green {
+ label = "F@ST2704N:green:wps";
+ gpios = <&gpio0 2 1>;
+ };
+ lan1_green {
+ label = "F@ST2704N:green:lan1";
+ gpios = <&gpio0 4 1>;
+ };
+ lan2_green {
+ label = "F@ST2704N:green:lan2";
+ gpios = <&gpio0 5 1>;
+ };
+ lan3_green {
+ label = "F@ST2704N:green:lan3";
+ gpios = <&gpio0 6 1>;
+ };
+ lan4_green {
+ label = "F@ST2704N:green:lan4";
+ gpios = <&gpio0 7 1>;
+ };
+ inet_green {
+ label = "F@ST2704N:green:inet";
+ gpios = <&gpio0 8 1>;
+ };
+ inet_red {
+ label = "F@ST2704N:red:inet";
+ gpios = <&gpio0 9 1>;
+ };
+ dsl_green {
+ label = "F@ST2704N:green:dsl";
+ gpios = <&gpio0 10 1>;
+ };
+ power_red {
+ label = "F@ST2704N:red:power";
+ gpios = <&gpio0 11 1>;
+ };
+ power_green {
+ label = "F@ST2704N:green:power";
+ gpios = <&gpio1 15 1>;
+ default-state = "on";
+ };
+ usb_green {
+ label = "F@ST2704N:green:usb";
+ gpios = <&gpio1 17 1>;
+ };
+ };
+};
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 8e148aa..4a52a41 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -623,6 +623,8 @@ $(eval $(call bcm63xxCfe,FAST2404,F@ST2404,fast2404,F@ST2404,6348))
$(eval $(call bcm63xxCfe,FAST2504n,F@ST2504n,fast2504n,F@ST2504n,6362))
# Sagem F@ST2604
$(eval $(call bcm63xxCfe,FAST2604,F@ST2604,fast2604,F@ST2604,6348))
+# Sagem F@ST2704N V1 / Plusnet F@ST2704N V1
+$(eval $(call bcm63xxCfe,FAST2704N,FAST2704N,fast2704n,F@ST2704N,6318,--pad 4))
# Sagem F@ST2704V2
$(eval $(call bcm63xxCfe,FAST2704V2,F@ST2704V2,fast2704v2,F@ST2704V2,6328))
# SFR Neufbox 4
diff --git a/target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch b/target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch
new file mode 100644
index 0000000..7b8b727
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch
@@ -0,0 +1,65 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -225,6 +225,46 @@ static struct board_info __initdata board_dsl_2751b_d1 = {
+ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
+ },
+ };
++
++static struct board_info __initdata board_FAST2704N = {
++ .name = "F@ST2704N",
++ .expected_cpu_id = 0x6318,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .use_fallback_sprom = 1,
++
++ .has_enetsw = 1,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+
+ /*
+@@ -2352,6 +2392,7 @@ static const struct board_info __initconst *bcm963xx_boards[] = {
+ &board_96318ref,
+ &board_96318ref_p300,
+ &board_dsl_2751b_d1,
++ &board_FAST2704N,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ &board_96328avng,
+@@ -2449,6 +2490,7 @@ static struct of_device_id const bcm963xx_boards_dt[] = {
+ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+ { .compatible = "brcm,bcm96318ref_p300", .data = &board_96318ref_p300, },
+ { .compatible = "d-link,dsl-275xb-d", .data = &board_dsl_2751b_d1, },
++ { .compatible = "sagem,f@st2704n", .data = &board_FAST2704N, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch b/target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch
new file mode 100644
index 0000000..7b8b727
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch
@@ -0,0 +1,65 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -225,6 +225,46 @@ static struct board_info __initdata board_dsl_2751b_d1 = {
+ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
+ },
+ };
++
++static struct board_info __initdata board_FAST2704N = {
++ .name = "F@ST2704N",
++ .expected_cpu_id = 0x6318,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .use_fallback_sprom = 1,
++
++ .has_enetsw = 1,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+
+ /*
+@@ -2352,6 +2392,7 @@ static const struct board_info __initconst *bcm963xx_boards[] = {
+ &board_96318ref,
+ &board_96318ref_p300,
+ &board_dsl_2751b_d1,
++ &board_FAST2704N,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ &board_96328avng,
+@@ -2449,6 +2490,7 @@ static struct of_device_id const bcm963xx_boards_dt[] = {
+ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+ { .compatible = "brcm,bcm96318ref_p300", .data = &board_96318ref_p300, },
+ { .compatible = "d-link,dsl-275xb-d", .data = &board_dsl_2751b_d1, },
++ { .compatible = "sagem,f@st2704n", .data = &board_FAST2704N, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/brcm63xx/profiles/sagem.mk b/target/linux/brcm63xx/profiles/sagem.mk
index 5afb2b7..7d9a160 100644
--- a/target/linux/brcm63xx/profiles/sagem.mk
+++ b/target/linux/brcm63xx/profiles/sagem.mk
@@ -32,6 +32,16 @@ define Profile/FAST2604/Description
endef
$(eval $(call Profile,FAST2604))
+define Profile/FAST2704N
+ NAME:=Sagem F@ST2704N
+ PACKAGES:=kmod-b43 wpad-mini \
+ kmod-usb2 kmod-usb-ohci
+endef
+define Profile/FAST2704N/Description
+ Package set optimized for F@ST2704N.
+endef
+$(eval $(call Profile,FAST2704N))
+
define Profile/FAST2704V2
NAME:=Sagem F@ST2704V2
PACKAGES:=kmod-b43 wpad-mini\