summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx')
-rw-r--r--target/linux/brcm63xx/config-3.143
-rw-r--r--target/linux/brcm63xx/config-3.186
-rw-r--r--target/linux/brcm63xx/dts/bcm3368.dtsi20
-rw-r--r--target/linux/brcm63xx/dts/bcm6318.dtsi23
-rw-r--r--target/linux/brcm63xx/dts/bcm63268.dtsi23
-rw-r--r--target/linux/brcm63xx/dts/bcm6328.dtsi12
-rw-r--r--target/linux/brcm63xx/dts/bcm6338.dtsi11
-rw-r--r--target/linux/brcm63xx/dts/bcm6345.dtsi11
-rw-r--r--target/linux/brcm63xx/dts/bcm6348.dtsi20
-rw-r--r--target/linux/brcm63xx/dts/bcm6358.dtsi20
-rw-r--r--target/linux/brcm63xx/dts/bcm6362.dtsi23
-rw-r--r--target/linux/brcm63xx/dts/bcm6368.dtsi20
-rw-r--r--target/linux/brcm63xx/patches-3.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch161
-rw-r--r--target/linux/brcm63xx/patches-3.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch216
-rw-r--r--target/linux/brcm63xx/patches-3.14/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch49
-rw-r--r--target/linux/brcm63xx/patches-3.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch138
-rw-r--r--target/linux/brcm63xx/patches-3.14/378-MIPS-BCM63XX-calculate-labels-for-DT-registered-cont.patch49
-rw-r--r--target/linux/brcm63xx/patches-3.14/379-gpio-gpio-bcm63xx-use-alias-id-for-base-calculation.patch34
-rw-r--r--target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch18
-rw-r--r--target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch8
-rw-r--r--target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch4
-rw-r--r--target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch4
-rw-r--r--target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch8
-rw-r--r--target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch16
-rw-r--r--target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch7
-rw-r--r--target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.18/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch161
-rw-r--r--target/linux/brcm63xx/patches-3.18/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch216
-rw-r--r--target/linux/brcm63xx/patches-3.18/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch46
-rw-r--r--target/linux/brcm63xx/patches-3.18/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch138
-rw-r--r--target/linux/brcm63xx/patches-3.18/378-MIPS-BCM63XX-calculate-labels-for-DT-registered-cont.patch44
-rw-r--r--target/linux/brcm63xx/patches-3.18/379-gpio-gpio-bcm63xx-use-alias-id-for-base-calculation.patch34
-rw-r--r--target/linux/brcm63xx/patches-3.18/402_bcm63xx_enet_vlan_incoming_fixed.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.18/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch18
-rw-r--r--target/linux/brcm63xx/patches-3.18/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.18/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch8
-rw-r--r--target/linux/brcm63xx/patches-3.18/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.18/420-BCM63XX-add-endian-check-for-ath9k.patch4
-rw-r--r--target/linux/brcm63xx/patches-3.18/421-BCM63XX-add-led-pin-for-ath9k.patch4
-rw-r--r--target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch8
-rw-r--r--target/linux/brcm63xx/patches-3.18/423-bcm63xx_enet_add_b53_support.patch16
-rw-r--r--target/linux/brcm63xx/patches-3.18/424-bcm63xx_enet_no_request_mem_region.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.18/499-allow_better_context_for_board_patches.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.18/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch7
-rw-r--r--target/linux/brcm63xx/patches-3.18/519_board_CPVA502plus.patch2
50 files changed, 1550 insertions, 82 deletions
diff --git a/target/linux/brcm63xx/config-3.14 b/target/linux/brcm63xx/config-3.14
index dd27f47..390d4ec 100644
--- a/target/linux/brcm63xx/config-3.14
+++ b/target/linux/brcm63xx/config-3.14
@@ -76,7 +76,9 @@ CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
+CONFIG_GPIO_BCM63XX=y
CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HAMRADIO is not set
CONFIG_HAS_DMA=y
@@ -152,6 +154,7 @@ CONFIG_MTD_M25P80=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_SPLIT_SUPPORT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
diff --git a/target/linux/brcm63xx/config-3.18 b/target/linux/brcm63xx/config-3.18
index e3cf020..5087033 100644
--- a/target/linux/brcm63xx/config-3.18
+++ b/target/linux/brcm63xx/config-3.18
@@ -10,7 +10,6 @@ CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_B53=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_PHY_DRIVER=y
@@ -71,6 +70,7 @@ CONFIG_DMA_NONCOHERENT=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -80,7 +80,9 @@ CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
+CONFIG_GPIO_BCM63XX=y
CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HAMRADIO is not set
CONFIG_HAS_DMA=y
@@ -143,7 +145,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=4
CONFIG_MIPS_L1_CACHE_SHIFT_4=y
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_O32_FP64_SUPPORT=y
-# CONFIG_MIPS_PARAVIRT is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
@@ -161,6 +162,7 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_SUPPORT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
diff --git a/target/linux/brcm63xx/dts/bcm3368.dtsi b/target/linux/brcm63xx/dts/bcm3368.dtsi
index dba73b5..ebf3d1c 100644
--- a/target/linux/brcm63xx/dts/bcm3368.dtsi
+++ b/target/linux/brcm63xx/dts/bcm3368.dtsi
@@ -5,6 +5,8 @@
aliases {
pflash = &pflash;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
};
cpus {
@@ -71,5 +73,23 @@
interrupt-parent = <&periph_intc>;
interrupts = <24>, <25>, <26>, <27>;
};
+
+ gpio1: gpio-controller@fff8c080 {
+ compatible = "brcm,6345-gpio";
+ reg = <0xfff8c080 4>, <0xfff8c088 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <8>;
+ };
+
+ gpio0: gpio-controller@fff8c084 {
+ compatible = "brcm,6345-gpio";
+ reg = <0xfff8c084 4>, <0xfff8c08c 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm6318.dtsi b/target/linux/brcm63xx/dts/bcm6318.dtsi
index 97bdea7..f851a9c 100644
--- a/target/linux/brcm63xx/dts/bcm6318.dtsi
+++ b/target/linux/brcm63xx/dts/bcm6318.dtsi
@@ -3,6 +3,11 @@
#size-cells = <1>;
compatible = "brcm,bcm6318";
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -51,5 +56,23 @@
interrupt-parent = <&cpu_intc>;
interrupts = <2>;
};
+
+ gpio1: gpio-controller@10000080 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000080 4>, <0x10000088 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <18>;
+ };
+
+ gpio0: gpio-controller@10000084 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000084 4>, <0x1000008c 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm63268.dtsi b/target/linux/brcm63xx/dts/bcm63268.dtsi
index bc80d70..0a1f8b1 100644
--- a/target/linux/brcm63xx/dts/bcm63268.dtsi
+++ b/target/linux/brcm63xx/dts/bcm63268.dtsi
@@ -3,6 +3,11 @@
#size-cells = <1>;
compatible = "brcm,bcm63268";
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -58,5 +63,23 @@
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
+
+ gpio1: gpio-controller@100000c0 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x100000c0 4>, <0x100000c8 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <20>;
+ };
+
+ gpio0: gpio-controller@100000c4 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x100000c4 4>, <0x100000cc 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm6328.dtsi b/target/linux/brcm63xx/dts/bcm6328.dtsi
index 53f96ff..a0b1316 100644
--- a/target/linux/brcm63xx/dts/bcm6328.dtsi
+++ b/target/linux/brcm63xx/dts/bcm6328.dtsi
@@ -3,6 +3,10 @@
#size-cells = <1>;
compatible = "brcm,bcm6328";
+ aliases {
+ gpio0 = &gpio0;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -51,5 +55,13 @@
interrupt-parent = <&cpu_intc>;
interrupts = <2>;
};
+
+ gpio0: gpio-controller@10000084 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000084 4>, <0x1000008c 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm6338.dtsi b/target/linux/brcm63xx/dts/bcm6338.dtsi
index c1980f4..d578a5b 100644
--- a/target/linux/brcm63xx/dts/bcm6338.dtsi
+++ b/target/linux/brcm63xx/dts/bcm6338.dtsi
@@ -5,6 +5,7 @@
aliases {
pflash = &pflash;
+ gpio0 = &gpio0;
};
cpus {
@@ -65,5 +66,15 @@
interrupt-parent = <&cpu_intc>;
interrupts = <3>, <4>, <5>, <6>;
};
+
+ gpio0: gpio-controller@fffe0404 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0xfffe0404 4>, <0xfffe040c 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <8>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm6345.dtsi b/target/linux/brcm63xx/dts/bcm6345.dtsi
index e8e7016..f702468 100644
--- a/target/linux/brcm63xx/dts/bcm6345.dtsi
+++ b/target/linux/brcm63xx/dts/bcm6345.dtsi
@@ -5,6 +5,7 @@
aliases {
pflash = &pflash;
+ gpio0 = &gpio0;
};
cpus {
@@ -65,5 +66,15 @@
interrupt-parent = <&cpu_intc>;
interrupts = <3>, <4>, <5>, <6>;
};
+
+ gpio0: gpio-controller@fffe0404 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0xfffe0404 4>, <0xfffe0408 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <16>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm6348.dtsi b/target/linux/brcm63xx/dts/bcm6348.dtsi
index 7dd423b..a4d8d9f 100644
--- a/target/linux/brcm63xx/dts/bcm6348.dtsi
+++ b/target/linux/brcm63xx/dts/bcm6348.dtsi
@@ -5,6 +5,8 @@
aliases {
pflash = &pflash;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
};
cpus {
@@ -67,5 +69,23 @@
brcm,field-width = <5>;
};
+
+ gpio1: gpio-controller@fffe0400 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0xfffe0400 4>, <0xfffe0408 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <5>;
+ };
+
+ gpio0: gpio-controller@fffe0404 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0xfffe0404 4>, <0xfffe040c 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm6358.dtsi b/target/linux/brcm63xx/dts/bcm6358.dtsi
index 7217b8d..bc3784a 100644
--- a/target/linux/brcm63xx/dts/bcm6358.dtsi
+++ b/target/linux/brcm63xx/dts/bcm6358.dtsi
@@ -5,6 +5,8 @@
aliases {
pflash = &pflash;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
};
cpus {
@@ -83,5 +85,23 @@
interrupt-parent = <&periph_intc>;
interrupts = <20>, <21>;
};
+
+ gpio1: gpio-controller@fffe0080 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0xfffe0080 4>, <0xfffe0088 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <8>;
+ };
+
+ gpio0: gpio-controller@fffe0084 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0xfffe0084 4>, <0xfffe008c 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm6362.dtsi b/target/linux/brcm63xx/dts/bcm6362.dtsi
index 4e2e41d..6604f5c 100644
--- a/target/linux/brcm63xx/dts/bcm6362.dtsi
+++ b/target/linux/brcm63xx/dts/bcm6362.dtsi
@@ -3,6 +3,11 @@
#size-cells = <1>;
compatible = "brcm,bcm6362";
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -58,5 +63,23 @@
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
+
+ gpio1: gpio-controller@10000080 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000080 4>, <0x10000088 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <16>;
+ };
+
+ gpio0: gpio-controller@10000084 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000084 4>, <0x1000008c 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
};
diff --git a/target/linux/brcm63xx/dts/bcm6368.dtsi b/target/linux/brcm63xx/dts/bcm6368.dtsi
index 27b9f62..628c2d0 100644
--- a/target/linux/brcm63xx/dts/bcm6368.dtsi
+++ b/target/linux/brcm63xx/dts/bcm6368.dtsi
@@ -5,6 +5,8 @@
aliases {
pflash = &pflash;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
};
cpus {
@@ -73,6 +75,24 @@
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
+
+ gpio1: gpio-controller@10000080 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000080 4>, <0x10000088 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ngpios = <6>;
+ };
+
+ gpio0: gpio-controller@10000084 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000084 4>, <0x1000008c 4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
pflash: nor@18000000 {
diff --git a/target/linux/brcm63xx/patches-3.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/brcm63xx/patches-3.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
new file mode 100644
index 0000000..7d1cd28
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
@@ -0,0 +1,161 @@
+From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 20 Feb 2015 19:55:32 +0100
+Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/gpio/Kconfig | 8 +++
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-bcm63xx.c | 117 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 126 insertions(+)
+ create mode 100644 drivers/gpio/gpio-bcm63xx.c
+
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -821,6 +821,14 @@ config GPIO_BCM_KONA
+ help
+ Turn on GPIO support for Broadcom "Kona" chips.
+
++config GPIO_BCM63XX
++ bool "Broadcom BCM63XX GPIO"
++ depends on MIPS || COMPILE_TEST
++ select GPIO_GENERIC
++ help
++ Turn on GPIO support for Broadcom BCM63XX xDSL chips.
++
++
+ comment "USB GPIO expanders:"
+
+ config GPIO_VIPERBOARD
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_ADP5588) += gpio-adp55
+ obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
+ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
+ obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
++obj-$(CONFIG_GPIO_BCM63XX) += gpio-bcm63xx.o
+ obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
+ obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
+ obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
+--- /dev/null
++++ b/drivers/gpio/gpio-bcm63xx.c
+@@ -0,0 +1,117 @@
++/*
++ * Driver for BCM63XX memory-mapped GPIO controllers, based on
++ * Generic driver for memory-mapped GPIO controllers.
++ *
++ * Copyright 2008 MontaVista Software, Inc.
++ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
++ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/err.h>
++#include <linux/bug.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/compiler.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/log2.h>
++#include <linux/ioport.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/mod_devicetable.h>
++#include <linux/basic_mmio_gpio.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++
++static int bcm63xx_gpio_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct resource *dat_r, *dirout_r;
++ void __iomem *dat;
++ void __iomem *dirout;
++ unsigned long sz;
++ int err;
++ struct bgpio_chip *bgc;
++ struct bgpio_pdata *pdata = dev_get_platdata(dev);
++
++ dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!dat_r || !dirout_r)
++ return -EINVAL;
++
++ if (resource_size(dat_r) != resource_size(dirout_r))
++ return -EINVAL;
++
++ sz = resource_size(dat_r);
++
++ dat = devm_ioremap_resource(dev, dat_r);
++ if (IS_ERR(dat))
++ return PTR_ERR(dat);
++
++ dirout = devm_ioremap_resource(dev, dirout_r);
++ if (IS_ERR(dirout))
++ return PTR_ERR(dirout);
++
++ bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
++ if (!bgc)
++ return -ENOMEM;
++
++ err = bgpio_init(bgc, dev, sz, dat, NULL, NULL, dirout, NULL,
++ BGPIOF_BIG_ENDIAN_BYTE_ORDER);
++ if (err)
++ return err;
++
++ platform_set_drvdata(pdev, bgc);
++
++ if (dev->of_node) {
++ u32 ngpios;
++
++ if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
++ bgc->gc.ngpio = ngpios;
++
++ } else if (pdata) {
++ bgc->gc.base = pdata->base;
++ if (pdata->ngpio > 0)
++ bgc->gc.ngpio = pdata->ngpio;
++ }
++
++ return gpiochip_add(&bgc->gc);
++}
++
++static int bcm63xx_gpio_remove(struct platform_device *pdev)
++{
++ struct bgpio_chip *bgc = platform_get_drvdata(pdev);
++
++ return bgpio_remove(bgc);
++}
++
++#ifdef CONFIG_OF
++static struct of_device_id bcm63xx_gpio_of_match[] = {
++ { .compatible = "brcm,bcm6345-gpio" },
++ { },
++};
++#endif
++
++static struct platform_driver bcm63xx_gpio_driver = {
++ .probe = bcm63xx_gpio_probe,
++ .remove = bcm63xx_gpio_remove,
++ .driver = {
++ .name = "bcm63xx-gpio",
++ .of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
++ },
++};
++
++module_platform_driver(bcm63xx_gpio_driver);
++
++MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
++MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-3.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/brcm63xx/patches-3.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
new file mode 100644
index 0000000..24dd3a9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
@@ -0,0 +1,216 @@
+From cc99dca188bb63ba390008e2f7fa62d0300233e0 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 20 Feb 2015 23:58:54 +0100
+Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_common.c | 2 +
+ arch/mips/bcm63xx/gpio.c | 147 +++++++------------------------
+ arch/mips/bcm63xx/prom.c | 3 -
+ 3 files changed, 33 insertions(+), 119 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -204,6 +204,8 @@ int __init board_register_devices(void)
+ }
+ #endif
+
++ bcm63xx_gpio_init();
++
+ if (board.has_uart0)
+ bcm63xx_uart_register(0);
+
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -5,147 +5,62 @@
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
+ */
+
+ #include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/spinlock.h>
+ #include <linux/platform_device.h>
++#include <linux/basic_mmio_gpio.h>
+ #include <linux/gpio.h>
+
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_gpio.h>
+-#include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+
+-static u32 gpio_out_low_reg;
+-
+-static void bcm63xx_gpio_out_low_reg_init(void)
++static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ {
+- switch (bcm63xx_get_cpu_id()) {
+- case BCM6345_CPU_ID:
+- gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
+- break;
+- default:
+- gpio_out_low_reg = GPIO_DATA_LO_REG;
+- break;
+- }
+-}
+-
+-static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+-static u32 gpio_out_low, gpio_out_high;
++ struct resource res[2];
++ struct bgpio_pdata pdata;
+
+-static void bcm63xx_gpio_set(struct gpio_chip *chip,
+- unsigned gpio, int val)
+-{
+- u32 reg;
+- u32 mask;
+- u32 *v;
+- unsigned long flags;
+-
+- if (gpio >= chip->ngpio)
+- BUG();
+-
+- if (gpio < 32) {
+- reg = gpio_out_low_reg;
+- mask = 1 << gpio;
+- v = &gpio_out_low;
+- } else {
+- reg = GPIO_DATA_HI_REG;
+- mask = 1 << (gpio - 32);
+- v = &gpio_out_high;
+- }
+-
+- spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+- if (val)
+- *v |= mask;
+- else
+- *v &= ~mask;
+- bcm_gpio_writel(*v, reg);
+- spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+-}
++ memset(res, 0, sizeof(res));
++ memset(&pdata, 0, sizeof(pdata));
+
+-static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
+-{
+- u32 reg;
+- u32 mask;
++ res[0].flags = IORESOURCE_MEM;
++ res[0].start = bcm63xx_regset_address(RSET_GPIO);
++ res[0].start += data;
+
+- if (gpio >= chip->ngpio)
+- BUG();
++ res[0].end = res[0].start + 3;
+
+- if (gpio < 32) {
+- reg = gpio_out_low_reg;
+- mask = 1 << gpio;
+- } else {
+- reg = GPIO_DATA_HI_REG;
+- mask = 1 << (gpio - 32);
+- }
++ res[1].flags = IORESOURCE_MEM;
++ res[1].start = bcm63xx_regset_address(RSET_GPIO);
++ res[1].start += dir;
+
+- return !!(bcm_gpio_readl(reg) & mask);
+-}
++ res[1].end = res[1].start + 3;
+
+-static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
+- unsigned gpio, int dir)
+-{
+- u32 reg;
+- u32 mask;
+- u32 tmp;
+- unsigned long flags;
+-
+- if (gpio >= chip->ngpio)
+- BUG();
+-
+- if (gpio < 32) {
+- reg = GPIO_CTL_LO_REG;
+- mask = 1 << gpio;
+- } else {
+- reg = GPIO_CTL_HI_REG;
+- mask = 1 << (gpio - 32);
+- }
+-
+- spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+- tmp = bcm_gpio_readl(reg);
+- if (dir == BCM63XX_GPIO_DIR_IN)
+- tmp &= ~mask;
+- else
+- tmp |= mask;
+- bcm_gpio_writel(tmp, reg);
+- spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
++ pdata.base = id * 32;
++ pdata.ngpio = ngpio;
+
+- return 0;
++ platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
++ &pdata, sizeof(pdata));
+ }
+
+-static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++int __init bcm63xx_gpio_init(void)
+ {
+- return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
+-}
++ int ngpio = bcm63xx_gpio_count();
++ int data_low_reg;
+
+-static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
+- unsigned gpio, int value)
+-{
+- bcm63xx_gpio_set(chip, gpio, value);
+- return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
+-}
++ if (BCMCPU_IS_6345())
++ data_low_reg = GPIO_DATA_LO_REG_6345;
++ else
++ data_low_reg = GPIO_DATA_LO_REG;
+
++ bcm63xx_gpio_init_one(0, data_low_reg, GPIO_CTL_LO_REG, min(ngpio, 32));
+
+-static struct gpio_chip bcm63xx_gpio_chip = {
+- .label = "bcm63xx-gpio",
+- .direction_input = bcm63xx_gpio_direction_input,
+- .direction_output = bcm63xx_gpio_direction_output,
+- .get = bcm63xx_gpio_get,
+- .set = bcm63xx_gpio_set,
+- .base = 0,
+-};
++ if (ngpio <= 32)
++ return 0;
+
+-int __init bcm63xx_gpio_init(void)
+-{
+- bcm63xx_gpio_out_low_reg_init();
++ bcm63xx_gpio_init_one(1, GPIO_DATA_HI_REG, GPIO_CTL_HI_REG, ngpio - 32);
+
+- gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
+- if (!BCMCPU_IS_6345())
+- gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
+- bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
+- pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
++ return 0;
+
+- return gpiochip_add(&bcm63xx_gpio_chip);
+ }
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -54,9 +54,6 @@ void __init prom_init(void)
+ reg &= ~mask;
+ bcm_perf_writel(reg, PERF_CKCTL_REG);
+
+- /* register gpiochip */
+- bcm63xx_gpio_init();
+-
+ /* detect and setup flash access */
+ bcm63xx_flash_detect();
+
diff --git a/target/linux/brcm63xx/patches-3.14/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-3.14/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
new file mode 100644
index 0000000..0e691f7
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
@@ -0,0 +1,49 @@
+From ec905f2ea78ec40602a685ede31c5e4f9893d196 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 16:35:07 +0100
+Subject: [PATCH 3/6] net: bcm63xx_enet: use named gpio for ephy reset gpio
+
+Allow using a named optional gpio for ephy reset gpio registration.
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -30,6 +30,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/if_vlan.h>
++#include <linux/gpio/consumer.h>
+
+ #include <bcm63xx_dev_enet.h>
+ #include "bcm63xx_enet.h"
+@@ -2852,10 +2853,18 @@ static int bcm_enet_shared_probe(struct
+ {
+ struct resource *res;
+ void __iomem *p[3];
++ struct gpio_desc *ephy_reset;
+ unsigned int i;
+
+ memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
+
++ ephy_reset = devm_gpiod_get(&pdev->dev, "ephy-reset");
++ if (IS_ERR(ephy_reset)) {
++ if (PTR_ERR(ephy_reset) != -ENOENT)
++ return PTR_ERR(ephy_reset);
++ ephy_reset = NULL;
++ }
++
+ for (i = 0; i < 3; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ p[i] = devm_ioremap_resource(&pdev->dev, res);
+@@ -2865,6 +2874,9 @@ static int bcm_enet_shared_probe(struct
+
+ memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
+
++ if (ephy_reset)
++ gpiod_direction_output(ephy_reset, 0);
++
+ return 0;
+ }
+
diff --git a/target/linux/brcm63xx/patches-3.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-3.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
new file mode 100644
index 0000000..288ccaa
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
@@ -0,0 +1,138 @@
+From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 17:21:59 +0100
+Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +-
+ arch/mips/bcm63xx/boards/board_common.c | 7 +++--
+ arch/mips/bcm63xx/gpio.c | 32 ++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 2 ++
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 5 +--
+ 5 files changed, 42 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -59,7 +59,7 @@ static struct board_info __initdata boar
+ },
+
+ .ephy_reset_gpio = 36,
+- .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
+ };
+ #endif
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -278,9 +278,10 @@ int __init board_register_devices(void)
+ platform_device_register(&bcm63xx_gpio_leds);
+ }
+
+- if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+- gpio_request_one(board.ephy_reset_gpio,
+- board.ephy_reset_gpio_flags, "ephy-reset");
++ if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
++ bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
++ board.ephy_reset_gpio_flags);
++ }
+
+ /* count number of BUTTONs defined by this device */
+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -8,15 +8,24 @@
+ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
+ */
+
++#include <asm/addrspace.h>
++
+ #include <linux/kernel.h>
+ #include <linux/platform_device.h>
+ #include <linux/basic_mmio_gpio.h>
+ #include <linux/gpio.h>
++#include <linux/gpio/driver.h>
+
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_regs.h>
+
++/* for registering lookups; make them large enough to hold OF names */
++static char *gpio_chip_labels[] = {
++ "xxxxxxxx.gpio-controller",
++ "xxxxxxxx.gpio-controller",
++};
++
+ static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ {
+ struct resource res[2];
+@@ -40,6 +49,7 @@ static void __init bcm63xx_gpio_init_one
+ pdata.base = id * 32;
+ pdata.ngpio = ngpio;
+
++ sprintf(gpio_chip_labels[id], "bcm63xx-gpio.%d", id);
+ platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
+ &pdata, sizeof(pdata));
+ }
+@@ -64,3 +74,25 @@ int __init bcm63xx_gpio_init(void)
+ return 0;
+
+ }
++
++static struct gpiod_lookup_table ephy_reset = {
++ .dev_id = "bcm63xx_enet_shared.0",
++ .table = {
++ { /* filled at runtime */ },
++ { },
++ },
++};
++
++
++void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
++{
++ if (ephy_reset.table[0].chip_label)
++ return;
++
++ ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
++ ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
++ ephy_reset.table[0].con_id = "ephy-reset";
++ ephy_reset.table[0].flags = flags;
++
++ gpiod_add_lookup_table(&ephy_reset);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -2,9 +2,11 @@
+ #define BCM63XX_GPIO_H
+
+ #include <linux/init.h>
++#include <linux/gpio/driver.h>
+ #include <bcm63xx_cpu.h>
+
+ int __init bcm63xx_gpio_init(void);
++void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
+
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -4,6 +4,7 @@
+ #include <linux/types.h>
+ #include <linux/gpio.h>
+ #include <linux/gpio_keys.h>
++#include <linux/gpio/driver.h>
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+@@ -58,8 +59,8 @@ struct board_info {
+ /* External PHY reset GPIO */
+ unsigned int ephy_reset_gpio;
+
+- /* External PHY reset GPIO flags from gpio.h */
+- unsigned long ephy_reset_gpio_flags;
++ /* External PHY reset GPIO flags from gpio/machine.h */
++ enum gpio_lookup_flags ephy_reset_gpio_flags;
+
+ /* fallback sprom config */
+ struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/brcm63xx/patches-3.14/378-MIPS-BCM63XX-calculate-labels-for-DT-registered-cont.patch b/target/linux/brcm63xx/patches-3.14/378-MIPS-BCM63XX-calculate-labels-for-DT-registered-cont.patch
new file mode 100644
index 0000000..1f56c20
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/378-MIPS-BCM63XX-calculate-labels-for-DT-registered-cont.patch
@@ -0,0 +1,49 @@
+From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 17:26:50 +0100
+Subject: [PATCH 5/6] MIPS: BCM63XX: calculate labels for DT registered
+ controllers
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/gpio.c | 16 +++++++++++++---
+ 1 file changed, 13 insertions(+), 3 deletions(-)
+
+diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
+index 70cd05b..cf0b819 100644
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -20,6 +20,8 @@
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_regs.h>
+
++#include "boards/board_common.h"
++
+ /* for registering lookups; make them large enough to hold OF names */
+ static char *gpio_chip_labels[] = {
+ "xxxxxxxx.gpio-controller",
+@@ -49,9 +51,17 @@ static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ pdata.base = id * 32;
+ pdata.ngpio = ngpio;
+
+- sprintf(gpio_chip_labels[id], "bcm63xx-gpio.%d", id);
+- platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
+- &pdata, sizeof(pdata));
++ if (board_of_device_present("gpio0")) {
++ unsigned long base = res[0].start;
++
++ if (base < 0xf0000000U)
++ base = CPHYSADDR(base);
++ sprintf(gpio_chip_labels[id], "%lx.gpio-controller", base);
++ } else {
++ sprintf(gpio_chip_labels[id], "bcm63xx-gpio.%d", id);
++ platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
++ 2, &pdata, sizeof(pdata));
++ }
+ }
+
+ int __init bcm63xx_gpio_init(void)
+--
+1.7.10.4
+
diff --git a/target/linux/brcm63xx/patches-3.14/379-gpio-gpio-bcm63xx-use-alias-id-for-base-calculation.patch b/target/linux/brcm63xx/patches-3.14/379-gpio-gpio-bcm63xx-use-alias-id-for-base-calculation.patch
new file mode 100644
index 0000000..5be625a
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/379-gpio-gpio-bcm63xx-use-alias-id-for-base-calculation.patch
@@ -0,0 +1,34 @@
+From 6759a62f28bb1995afe6562c0adfbbb6e8540933 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Feb 2015 12:57:58 +0100
+Subject: [PATCH 6/6] gpio: gpio-bcm63xx: use alias id for base calculation
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/gpio/gpio-bcm63xx.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/gpio/gpio-bcm63xx.c
++++ b/drivers/gpio/gpio-bcm63xx.c
+@@ -32,6 +32,8 @@
+ #include <linux/of.h>
+ #include <linux/of_gpio.h>
+
++#define BCM63XX_GPIOS_PER_BANK 32
++
+ static int bcm63xx_gpio_probe(struct platform_device *pdev)
+ {
+ struct device *dev = &pdev->dev;
+@@ -73,8 +75,12 @@ static int bcm63xx_gpio_probe(struct pla
+ platform_set_drvdata(pdev, bgc);
+
+ if (dev->of_node) {
++ int id = of_alias_get_id(dev->of_node, "gpio");
+ u32 ngpios;
+
++ if (id >= 0)
++ bgc->gc.base = id * BCM63XX_GPIOS_PER_BANK;
++
+ if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
+ bgc->gc.ngpio = ngpios;
+
diff --git a/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
index fc2e8ab..8e30ce4 100644
--- a/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
+++ b/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1633,7 +1633,7 @@ static int compute_hw_mtu(struct bcm_ene
+@@ -1634,7 +1634,7 @@ static int compute_hw_mtu(struct bcm_ene
actual_mtu = mtu;
/* add ethernet header + vlan tag size */
diff --git a/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
index d8405f5..b9420d5 100644
--- a/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ b/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
@@ -15,7 +15,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
+@@ -871,10 +871,8 @@ static int bcm_enet_open(struct net_devi
struct bcm_enet_priv *priv;
struct sockaddr addr;
struct device *kdev;
@@ -26,7 +26,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
void *p;
u32 val;
-@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
+@@ -882,40 +880,10 @@ static int bcm_enet_open(struct net_devi
kdev = &priv->pdev->dev;
if (priv->has_phy) {
@@ -68,7 +68,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
/* mask all interrupts and request them */
-@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
+@@ -925,7 +893,7 @@ static int bcm_enet_open(struct net_devi
ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
if (ret)
@@ -77,7 +77,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
dev->name, dev);
-@@ -1127,9 +1095,6 @@ out_freeirq_rx:
+@@ -1128,9 +1096,6 @@ out_freeirq_rx:
out_freeirq:
free_irq(dev->irq, dev);
@@ -87,7 +87,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return ret;
}
-@@ -1234,12 +1199,6 @@ static int bcm_enet_stop(struct net_devi
+@@ -1235,12 +1200,6 @@ static int bcm_enet_stop(struct net_devi
free_irq(priv->irq_rx, dev);
free_irq(dev->irq, dev);
@@ -100,7 +100,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return 0;
}
-@@ -1834,6 +1793,8 @@ static int bcm_enet_probe(struct platfor
+@@ -1835,6 +1794,8 @@ static int bcm_enet_probe(struct platfor
/* MII bus registration */
if (priv->has_phy) {
@@ -109,7 +109,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
priv->mii_bus = mdiobus_alloc();
if (!priv->mii_bus) {
-@@ -1871,6 +1832,38 @@ static int bcm_enet_probe(struct platfor
+@@ -1872,6 +1833,38 @@ static int bcm_enet_probe(struct platfor
dev_err(&pdev->dev, "unable to register mdio bus\n");
goto out_free_mdio;
}
@@ -148,7 +148,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
} else {
/* run platform code to initialize PHY device */
-@@ -1916,6 +1909,9 @@ static int bcm_enet_probe(struct platfor
+@@ -1917,6 +1910,9 @@ static int bcm_enet_probe(struct platfor
return 0;
out_unregister_mdio:
@@ -158,7 +158,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
if (priv->mii_bus)
mdiobus_unregister(priv->mii_bus);
-@@ -1957,6 +1953,8 @@ static int bcm_enet_remove(struct platfo
+@@ -1958,6 +1954,8 @@ static int bcm_enet_remove(struct platfo
enet_writel(priv, 0, ENET_MIISC_REG);
if (priv->has_phy) {
diff --git a/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
index a6f35c5..1cff9c1 100644
--- a/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
+++ b/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
@@ -32,7 +32,7 @@ Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
#define ENETSW_MDIOC_EXT_MASK (1 << 16)
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2228,6 +2228,18 @@ static int bcm_enetsw_open(struct net_de
+@@ -2229,6 +2229,18 @@ static int bcm_enetsw_open(struct net_de
priv->sw_port_link[i] = 0;
}
diff --git a/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
index bcb92a1..0960005 100644
--- a/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
+++ b/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
@@ -26,7 +26,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
#if CONFIG_OF
if (of_have_populated_dt()) {
-@@ -293,6 +295,10 @@ int __init board_register_devices(void)
+@@ -296,6 +298,10 @@ int __init board_register_devices(void)
platform_device_register(&bcm63xx_gpio_keys_device);
}
@@ -39,7 +39,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -9,6 +9,7 @@
+@@ -10,6 +10,7 @@
#include <bcm63xx_dev_usb_usbd.h>
#include <bcm63xx_dev_dsp.h>
#include <bcm63xx_fallback_sprom.h>
@@ -47,7 +47,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
/*
* flash mapping
-@@ -16,6 +17,11 @@
+@@ -17,6 +18,11 @@
#define BCM963XX_CFE_VERSION_OFFSET 0x570
#define BCM963XX_NVRAM_OFFSET 0x580
@@ -59,7 +59,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
/*
* board definition
*/
-@@ -36,6 +42,10 @@ struct board_info {
+@@ -37,6 +43,10 @@ struct board_info {
unsigned int has_uart0:1;
unsigned int has_uart1:1;
unsigned int use_fallback_sprom:1;
diff --git a/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
index fdcfa19..b329c31 100644
--- a/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
+++ b/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
@@ -11,7 +11,7 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -267,7 +267,7 @@ int __init board_register_devices(void)
+@@ -269,7 +269,7 @@ int __init board_register_devices(void)
if (board.num_spis)
spi_register_board_info(board.spis, board.num_spis);
diff --git a/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
index 0e01be1..5398c3d 100644
--- a/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
+++ b/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
@@ -11,7 +11,7 @@
#endif /* _PCI_ATH9K_FIXUP */
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -20,6 +20,7 @@
+@@ -21,6 +21,7 @@
struct ath9k_caldata {
unsigned int slot;
u32 caldata_offset;
@@ -39,7 +39,7 @@
return;
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -297,7 +297,8 @@ int __init board_register_devices(void)
+@@ -300,7 +300,8 @@ int __init board_register_devices(void)
/* register any fixups */
for (i = 0; i < board.has_caldata; i++)
diff --git a/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
index 27ea83f..1310136 100644
--- a/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
+++ b/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -298,7 +298,7 @@ int __init board_register_devices(void)
+@@ -301,7 +301,7 @@ int __init board_register_devices(void)
/* register any fixups */
for (i = 0; i < board.has_caldata; i++)
pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
@@ -29,7 +29,7 @@
return;
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -21,6 +21,7 @@ struct ath9k_caldata {
+@@ -22,6 +22,7 @@ struct ath9k_caldata {
unsigned int slot;
u32 caldata_offset;
unsigned int endian_check:1;
diff --git a/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
index c07bd32..bff489b 100644
--- a/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
+++ b/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
@@ -36,7 +36,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
#include "board_common.h"
-@@ -296,9 +297,19 @@ int __init board_register_devices(void)
+@@ -299,9 +300,19 @@ int __init board_register_devices(void)
}
/* register any fixups */
@@ -158,7 +158,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -10,6 +10,7 @@
+@@ -11,6 +11,7 @@
#include <bcm63xx_dev_dsp.h>
#include <bcm63xx_fallback_sprom.h>
#include <pci_ath9k_fixup.h>
@@ -166,7 +166,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
/*
* flash mapping
-@@ -17,11 +18,15 @@
+@@ -18,11 +19,15 @@
#define BCM963XX_CFE_VERSION_OFFSET 0x570
#define BCM963XX_NVRAM_OFFSET 0x580
@@ -183,7 +183,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
};
/*
-@@ -47,7 +52,7 @@ struct board_info {
+@@ -48,7 +53,7 @@ struct board_info {
unsigned int has_caldata:2;
/* wifi calibration data config */
diff --git a/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
index 271119c..48a33ef 100644
--- a/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
+++ b/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
@@ -12,15 +12,15 @@
spinlock_t enetsw_mdio_lock;
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
+@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/if_vlan.h>
+ #include <linux/gpio/consumer.h>
+#include <linux/platform_data/b53.h>
#include <bcm63xx_dev_enet.h>
#include "bcm63xx_enet.h"
-@@ -1978,7 +1979,8 @@ static int bcm_enet_remove(struct platfo
+@@ -1979,7 +1980,8 @@ static int bcm_enet_remove(struct platfo
return 0;
}
@@ -30,7 +30,7 @@
.probe = bcm_enet_probe,
.remove = bcm_enet_remove,
.driver = {
-@@ -1987,6 +1989,42 @@ struct platform_driver bcm63xx_enet_driv
+@@ -1988,6 +1990,42 @@ struct platform_driver bcm63xx_enet_driv
},
};
@@ -73,7 +73,7 @@
/*
* switch mii access callbacks
*/
-@@ -2240,29 +2278,6 @@ static int bcm_enetsw_open(struct net_de
+@@ -2241,29 +2279,6 @@ static int bcm_enetsw_open(struct net_de
enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
}
@@ -103,7 +103,7 @@
/* initialize flow control buffer allocation */
enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2722,6 +2737,9 @@ static int bcm_enetsw_probe(struct platf
+@@ -2723,6 +2738,9 @@ static int bcm_enetsw_probe(struct platf
struct bcm63xx_enetsw_platform_data *pd;
struct resource *res_mem;
int ret, irq_rx, irq_tx;
@@ -113,7 +113,7 @@
/* stop if shared driver failed, assume driver->probe will be
* called in the same order we register devices (correct ?)
-@@ -2811,6 +2829,43 @@ static int bcm_enetsw_probe(struct platf
+@@ -2812,6 +2830,43 @@ static int bcm_enetsw_probe(struct platf
priv->pdev = pdev;
priv->net_dev = dev;
@@ -157,7 +157,7 @@
return 0;
out_put_clk:
-@@ -2839,6 +2894,9 @@ static int bcm_enetsw_remove(struct plat
+@@ -2840,6 +2895,9 @@ static int bcm_enetsw_remove(struct plat
priv = netdev_priv(dev);
unregister_netdev(dev);
diff --git a/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
index 24dd27a..4725583 100644
--- a/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
+++ b/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2784,12 +2784,6 @@ static int bcm_enetsw_probe(struct platf
+@@ -2785,12 +2785,6 @@ static int bcm_enetsw_probe(struct platf
if (ret)
goto out;
diff --git a/target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch b/target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch
index 5dcfa9d..1fd4407 100644
--- a/target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch
+++ b/target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch
@@ -2,7 +2,7 @@
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -61,7 +61,7 @@ static struct board_info __initdata boar
.ephy_reset_gpio = 36,
- .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
};
-#endif
+#endif /* CONFIG_BCM63XX_CPU_3368 */
diff --git a/target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
index 3414379..9775970 100644
--- a/target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
+++ b/target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
@@ -57,7 +57,7 @@ Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
#endif /* __BOARD_COMMON_H */
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,215 @@
+@@ -0,0 +1,212 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -111,7 +111,7 @@ Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
+ },
+
+ .ephy_reset_gpio = 6,
-+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
@@ -168,9 +168,6 @@ Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
+ },
+
+ },
-+
-+ .ephy_reset_gpio = 6,
-+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
+};
+#endif
+
diff --git a/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
index d7a8087..58a793f 100644
--- a/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
+++ b/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
@@ -36,7 +36,7 @@
+ },
+
+ .ephy_reset_gpio = 4,
-+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
+};
static struct board_info __initdata board_ct536_ct5621 = {
diff --git a/target/linux/brcm63xx/patches-3.18/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/brcm63xx/patches-3.18/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
new file mode 100644
index 0000000..82d7abe
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
@@ -0,0 +1,161 @@
+From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 20 Feb 2015 19:55:32 +0100
+Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/gpio/Kconfig | 8 +++
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-bcm63xx.c | 117 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 126 insertions(+)
+ create mode 100644 drivers/gpio/gpio-bcm63xx.c
+
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -892,6 +892,14 @@ config GPIO_BCM_KONA
+ help
+ Turn on GPIO support for Broadcom "Kona" chips.
+
++config GPIO_BCM63XX
++ bool "Broadcom BCM63XX GPIO"
++ depends on MIPS || COMPILE_TEST
++ select GPIO_GENERIC
++ help
++ Turn on GPIO support for Broadcom BCM63XX xDSL chips.
++
++
+ comment "USB GPIO expanders:"
+
+ config GPIO_VIPERBOARD
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_GPIO_ADP5588) += gpio-adp55
+ obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
+ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
+ obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
++obj-$(CONFIG_GPIO_BCM63XX) += gpio-bcm63xx.o
+ obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
+ obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
+ obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
+--- /dev/null
++++ b/drivers/gpio/gpio-bcm63xx.c
+@@ -0,0 +1,117 @@
++/*
++ * Driver for BCM63XX memory-mapped GPIO controllers, based on
++ * Generic driver for memory-mapped GPIO controllers.
++ *
++ * Copyright 2008 MontaVista Software, Inc.
++ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
++ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/err.h>
++#include <linux/bug.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/compiler.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/log2.h>
++#include <linux/ioport.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/mod_devicetable.h>
++#include <linux/basic_mmio_gpio.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++
++static int bcm63xx_gpio_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct resource *dat_r, *dirout_r;
++ void __iomem *dat;
++ void __iomem *dirout;
++ unsigned long sz;
++ int err;
++ struct bgpio_chip *bgc;
++ struct bgpio_pdata *pdata = dev_get_platdata(dev);
++
++ dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!dat_r || !dirout_r)
++ return -EINVAL;
++
++ if (resource_size(dat_r) != resource_size(dirout_r))
++ return -EINVAL;
++
++ sz = resource_size(dat_r);
++
++ dat = devm_ioremap_resource(dev, dat_r);
++ if (IS_ERR(dat))
++ return PTR_ERR(dat);
++
++ dirout = devm_ioremap_resource(dev, dirout_r);
++ if (IS_ERR(dirout))
++ return PTR_ERR(dirout);
++
++ bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
++ if (!bgc)
++ return -ENOMEM;
++
++ err = bgpio_init(bgc, dev, sz, dat, NULL, NULL, dirout, NULL,
++ BGPIOF_BIG_ENDIAN_BYTE_ORDER);
++ if (err)
++ return err;
++
++ platform_set_drvdata(pdev, bgc);
++
++ if (dev->of_node) {
++ u32 ngpios;
++
++ if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
++ bgc->gc.ngpio = ngpios;
++
++ } else if (pdata) {
++ bgc->gc.base = pdata->base;
++ if (pdata->ngpio > 0)
++ bgc->gc.ngpio = pdata->ngpio;
++ }
++
++ return gpiochip_add(&bgc->gc);
++}
++
++static int bcm63xx_gpio_remove(struct platform_device *pdev)
++{
++ struct bgpio_chip *bgc = platform_get_drvdata(pdev);
++
++ return bgpio_remove(bgc);
++}
++
++#ifdef CONFIG_OF
++static struct of_device_id bcm63xx_gpio_of_match[] = {
++ { .compatible = "brcm,bcm6345-gpio" },
++ { },
++};
++#endif
++
++static struct platform_driver bcm63xx_gpio_driver = {
++ .probe = bcm63xx_gpio_probe,
++ .remove = bcm63xx_gpio_remove,
++ .driver = {
++ .name = "bcm63xx-gpio",
++ .of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
++ },
++};
++
++module_platform_driver(bcm63xx_gpio_driver);
++
++MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
++MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-3.18/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/brcm63xx/patches-3.18/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
new file mode 100644
index 0000000..24dd3a9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
@@ -0,0 +1,216 @@
+From cc99dca188bb63ba390008e2f7fa62d0300233e0 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 20 Feb 2015 23:58:54 +0100
+Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_common.c | 2 +
+ arch/mips/bcm63xx/gpio.c | 147 +++++++------------------------
+ arch/mips/bcm63xx/prom.c | 3 -
+ 3 files changed, 33 insertions(+), 119 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -204,6 +204,8 @@ int __init board_register_devices(void)
+ }
+ #endif
+
++ bcm63xx_gpio_init();
++
+ if (board.has_uart0)
+ bcm63xx_uart_register(0);
+
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -5,147 +5,62 @@
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
+ */
+
+ #include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/spinlock.h>
+ #include <linux/platform_device.h>
++#include <linux/basic_mmio_gpio.h>
+ #include <linux/gpio.h>
+
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_gpio.h>
+-#include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+
+-static u32 gpio_out_low_reg;
+-
+-static void bcm63xx_gpio_out_low_reg_init(void)
++static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ {
+- switch (bcm63xx_get_cpu_id()) {
+- case BCM6345_CPU_ID:
+- gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
+- break;
+- default:
+- gpio_out_low_reg = GPIO_DATA_LO_REG;
+- break;
+- }
+-}
+-
+-static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+-static u32 gpio_out_low, gpio_out_high;
++ struct resource res[2];
++ struct bgpio_pdata pdata;
+
+-static void bcm63xx_gpio_set(struct gpio_chip *chip,
+- unsigned gpio, int val)
+-{
+- u32 reg;
+- u32 mask;
+- u32 *v;
+- unsigned long flags;
+-
+- if (gpio >= chip->ngpio)
+- BUG();
+-
+- if (gpio < 32) {
+- reg = gpio_out_low_reg;
+- mask = 1 << gpio;
+- v = &gpio_out_low;
+- } else {
+- reg = GPIO_DATA_HI_REG;
+- mask = 1 << (gpio - 32);
+- v = &gpio_out_high;
+- }
+-
+- spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+- if (val)
+- *v |= mask;
+- else
+- *v &= ~mask;
+- bcm_gpio_writel(*v, reg);
+- spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+-}
++ memset(res, 0, sizeof(res));
++ memset(&pdata, 0, sizeof(pdata));
+
+-static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
+-{
+- u32 reg;
+- u32 mask;
++ res[0].flags = IORESOURCE_MEM;
++ res[0].start = bcm63xx_regset_address(RSET_GPIO);
++ res[0].start += data;
+
+- if (gpio >= chip->ngpio)
+- BUG();
++ res[0].end = res[0].start + 3;
+
+- if (gpio < 32) {
+- reg = gpio_out_low_reg;
+- mask = 1 << gpio;
+- } else {
+- reg = GPIO_DATA_HI_REG;
+- mask = 1 << (gpio - 32);
+- }
++ res[1].flags = IORESOURCE_MEM;
++ res[1].start = bcm63xx_regset_address(RSET_GPIO);
++ res[1].start += dir;
+
+- return !!(bcm_gpio_readl(reg) & mask);
+-}
++ res[1].end = res[1].start + 3;
+
+-static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
+- unsigned gpio, int dir)
+-{
+- u32 reg;
+- u32 mask;
+- u32 tmp;
+- unsigned long flags;
+-
+- if (gpio >= chip->ngpio)
+- BUG();
+-
+- if (gpio < 32) {
+- reg = GPIO_CTL_LO_REG;
+- mask = 1 << gpio;
+- } else {
+- reg = GPIO_CTL_HI_REG;
+- mask = 1 << (gpio - 32);
+- }
+-
+- spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+- tmp = bcm_gpio_readl(reg);
+- if (dir == BCM63XX_GPIO_DIR_IN)
+- tmp &= ~mask;
+- else
+- tmp |= mask;
+- bcm_gpio_writel(tmp, reg);
+- spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
++ pdata.base = id * 32;
++ pdata.ngpio = ngpio;
+
+- return 0;
++ platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
++ &pdata, sizeof(pdata));
+ }
+
+-static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++int __init bcm63xx_gpio_init(void)
+ {
+- return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
+-}
++ int ngpio = bcm63xx_gpio_count();
++ int data_low_reg;
+
+-static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
+- unsigned gpio, int value)
+-{
+- bcm63xx_gpio_set(chip, gpio, value);
+- return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
+-}
++ if (BCMCPU_IS_6345())
++ data_low_reg = GPIO_DATA_LO_REG_6345;
++ else
++ data_low_reg = GPIO_DATA_LO_REG;
+
++ bcm63xx_gpio_init_one(0, data_low_reg, GPIO_CTL_LO_REG, min(ngpio, 32));
+
+-static struct gpio_chip bcm63xx_gpio_chip = {
+- .label = "bcm63xx-gpio",
+- .direction_input = bcm63xx_gpio_direction_input,
+- .direction_output = bcm63xx_gpio_direction_output,
+- .get = bcm63xx_gpio_get,
+- .set = bcm63xx_gpio_set,
+- .base = 0,
+-};
++ if (ngpio <= 32)
++ return 0;
+
+-int __init bcm63xx_gpio_init(void)
+-{
+- bcm63xx_gpio_out_low_reg_init();
++ bcm63xx_gpio_init_one(1, GPIO_DATA_HI_REG, GPIO_CTL_HI_REG, ngpio - 32);
+
+- gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
+- if (!BCMCPU_IS_6345())
+- gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
+- bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
+- pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
++ return 0;
+
+- return gpiochip_add(&bcm63xx_gpio_chip);
+ }
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -54,9 +54,6 @@ void __init prom_init(void)
+ reg &= ~mask;
+ bcm_perf_writel(reg, PERF_CKCTL_REG);
+
+- /* register gpiochip */
+- bcm63xx_gpio_init();
+-
+ /* detect and setup flash access */
+ bcm63xx_flash_detect();
+
diff --git a/target/linux/brcm63xx/patches-3.18/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-3.18/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
new file mode 100644
index 0000000..6d19cc0
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
@@ -0,0 +1,46 @@
+From ec905f2ea78ec40602a685ede31c5e4f9893d196 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 16:35:07 +0100
+Subject: [PATCH 3/6] net: bcm63xx_enet: use named gpio for ephy reset gpio
+
+Allow using a named optional gpio for ephy reset gpio registration.
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -30,6 +30,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/if_vlan.h>
++#include <linux/gpio/consumer.h>
+
+ #include <bcm63xx_dev_enet.h>
+ #include "bcm63xx_enet.h"
+@@ -2848,10 +2849,15 @@ static int bcm_enet_shared_probe(struct
+ {
+ struct resource *res;
+ void __iomem *p[3];
++ struct gpio_desc *ephy_reset;
+ unsigned int i;
+
+ memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
+
++ ephy_reset = devm_gpiod_get_optional(&pdev->dev, "ephy-reset");
++ if (IS_ERR(ephy_reset))
++ return PTR_ERR(ephy_reset);
++
+ for (i = 0; i < 3; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ p[i] = devm_ioremap_resource(&pdev->dev, res);
+@@ -2861,6 +2867,9 @@ static int bcm_enet_shared_probe(struct
+
+ memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
+
++ if (ephy_reset)
++ gpiod_direction_output(ephy_reset, 0);
++
+ return 0;
+ }
+
diff --git a/target/linux/brcm63xx/patches-3.18/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-3.18/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
new file mode 100644
index 0000000..30f6ba5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
@@ -0,0 +1,138 @@
+From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 17:21:59 +0100
+Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +-
+ arch/mips/bcm63xx/boards/board_common.c | 7 +++--
+ arch/mips/bcm63xx/gpio.c | 32 ++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 2 ++
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 5 +--
+ 5 files changed, 42 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -59,7 +59,7 @@ static struct board_info __initdata boar
+ },
+
+ .ephy_reset_gpio = 36,
+- .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
+ };
+ #endif
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -278,9 +278,10 @@ int __init board_register_devices(void)
+ platform_device_register(&bcm63xx_gpio_leds);
+ }
+
+- if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+- gpio_request_one(board.ephy_reset_gpio,
+- board.ephy_reset_gpio_flags, "ephy-reset");
++ if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
++ bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
++ board.ephy_reset_gpio_flags);
++ }
+
+ /* count number of BUTTONs defined by this device */
+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -8,15 +8,24 @@
+ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
+ */
+
++#include <asm/addrspace.h>
++
+ #include <linux/kernel.h>
+ #include <linux/platform_device.h>
+ #include <linux/basic_mmio_gpio.h>
+ #include <linux/gpio.h>
++#include <linux/gpio/machine.h>
+
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_regs.h>
+
++/* for registering lookups; make them large enough to hold OF names */
++static char *gpio_chip_labels[] = {
++ "xxxxxxxx.gpio-controller",
++ "xxxxxxxx.gpio-controller",
++};
++
+ static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ {
+ struct resource res[2];
+@@ -40,6 +49,7 @@ static void __init bcm63xx_gpio_init_one
+ pdata.base = id * 32;
+ pdata.ngpio = ngpio;
+
++ sprintf(gpio_chip_labels[id], "bcm63xx-gpio.%d", id);
+ platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
+ &pdata, sizeof(pdata));
+ }
+@@ -64,3 +74,25 @@ int __init bcm63xx_gpio_init(void)
+ return 0;
+
+ }
++
++static struct gpiod_lookup_table ephy_reset = {
++ .dev_id = "bcm63xx_enet_shared.0",
++ .table = {
++ { /* filled at runtime */ },
++ { },
++ },
++};
++
++
++void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
++{
++ if (ephy_reset.table[0].chip_label)
++ return;
++
++ ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
++ ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
++ ephy_reset.table[0].con_id = "ephy-reset";
++ ephy_reset.table[0].flags = flags;
++
++ gpiod_add_lookup_table(&ephy_reset);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -2,9 +2,11 @@
+ #define BCM63XX_GPIO_H
+
+ #include <linux/init.h>
++#include <linux/gpio/machine.h>
+ #include <bcm63xx_cpu.h>
+
+ int __init bcm63xx_gpio_init(void);
++void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
+
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -4,6 +4,7 @@
+ #include <linux/types.h>
+ #include <linux/gpio.h>
+ #include <linux/gpio_keys.h>
++#include <linux/gpio/machine.h>
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+@@ -58,8 +59,8 @@ struct board_info {
+ /* External PHY reset GPIO */
+ unsigned int ephy_reset_gpio;
+
+- /* External PHY reset GPIO flags from gpio.h */
+- unsigned long ephy_reset_gpio_flags;
++ /* External PHY reset GPIO flags from gpio/machine.h */
++ enum gpio_lookup_flags ephy_reset_gpio_flags;
+
+ /* fallback sprom config */
+ struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/brcm63xx/patches-3.18/378-MIPS-BCM63XX-calculate-labels-for-DT-registered-cont.patch b/target/linux/brcm63xx/patches-3.18/378-MIPS-BCM63XX-calculate-labels-for-DT-registered-cont.patch
new file mode 100644
index 0000000..40f9e6d
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/378-MIPS-BCM63XX-calculate-labels-for-DT-registered-cont.patch
@@ -0,0 +1,44 @@
+From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 17:26:50 +0100
+Subject: [PATCH 5/6] MIPS: BCM63XX: calculate labels for DT registered
+ controllers
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/gpio.c | 16 +++++++++++++---
+ 1 file changed, 13 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -20,6 +20,8 @@
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_regs.h>
+
++#include "boards/board_common.h"
++
+ /* for registering lookups; make them large enough to hold OF names */
+ static char *gpio_chip_labels[] = {
+ "xxxxxxxx.gpio-controller",
+@@ -49,9 +51,17 @@ static void __init bcm63xx_gpio_init_one
+ pdata.base = id * 32;
+ pdata.ngpio = ngpio;
+
+- sprintf(gpio_chip_labels[id], "bcm63xx-gpio.%d", id);
+- platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
+- &pdata, sizeof(pdata));
++ if (board_of_device_present("gpio0")) {
++ unsigned long base = res[0].start;
++
++ if (base < 0xf0000000U)
++ base = CPHYSADDR(base);
++ sprintf(gpio_chip_labels[id], "%lx.gpio-controller", base);
++ } else {
++ sprintf(gpio_chip_labels[id], "bcm63xx-gpio.%d", id);
++ platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
++ 2, &pdata, sizeof(pdata));
++ }
+ }
+
+ int __init bcm63xx_gpio_init(void)
diff --git a/target/linux/brcm63xx/patches-3.18/379-gpio-gpio-bcm63xx-use-alias-id-for-base-calculation.patch b/target/linux/brcm63xx/patches-3.18/379-gpio-gpio-bcm63xx-use-alias-id-for-base-calculation.patch
new file mode 100644
index 0000000..5be625a
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/379-gpio-gpio-bcm63xx-use-alias-id-for-base-calculation.patch
@@ -0,0 +1,34 @@
+From 6759a62f28bb1995afe6562c0adfbbb6e8540933 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Feb 2015 12:57:58 +0100
+Subject: [PATCH 6/6] gpio: gpio-bcm63xx: use alias id for base calculation
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/gpio/gpio-bcm63xx.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/gpio/gpio-bcm63xx.c
++++ b/drivers/gpio/gpio-bcm63xx.c
+@@ -32,6 +32,8 @@
+ #include <linux/of.h>
+ #include <linux/of_gpio.h>
+
++#define BCM63XX_GPIOS_PER_BANK 32
++
+ static int bcm63xx_gpio_probe(struct platform_device *pdev)
+ {
+ struct device *dev = &pdev->dev;
+@@ -73,8 +75,12 @@ static int bcm63xx_gpio_probe(struct pla
+ platform_set_drvdata(pdev, bgc);
+
+ if (dev->of_node) {
++ int id = of_alias_get_id(dev->of_node, "gpio");
+ u32 ngpios;
+
++ if (id >= 0)
++ bgc->gc.base = id * BCM63XX_GPIOS_PER_BANK;
++
+ if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
+ bgc->gc.ngpio = ngpios;
+
diff --git a/target/linux/brcm63xx/patches-3.18/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.18/402_bcm63xx_enet_vlan_incoming_fixed.patch
index 8cb8099..fc2e8ab 100644
--- a/target/linux/brcm63xx/patches-3.18/402_bcm63xx_enet_vlan_incoming_fixed.patch
+++ b/target/linux/brcm63xx/patches-3.18/402_bcm63xx_enet_vlan_incoming_fixed.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1632,7 +1632,7 @@ static int compute_hw_mtu(struct bcm_ene
+@@ -1633,7 +1633,7 @@ static int compute_hw_mtu(struct bcm_ene
actual_mtu = mtu;
/* add ethernet header + vlan tag size */
diff --git a/target/linux/brcm63xx/patches-3.18/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.18/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
index 702e4ef..6036d2f 100644
--- a/target/linux/brcm63xx/patches-3.18/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ b/target/linux/brcm63xx/patches-3.18/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
@@ -15,7 +15,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
+@@ -871,10 +871,8 @@ static int bcm_enet_open(struct net_devi
struct bcm_enet_priv *priv;
struct sockaddr addr;
struct device *kdev;
@@ -26,7 +26,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
void *p;
u32 val;
-@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
+@@ -882,40 +880,10 @@ static int bcm_enet_open(struct net_devi
kdev = &priv->pdev->dev;
if (priv->has_phy) {
@@ -68,7 +68,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
/* mask all interrupts and request them */
-@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
+@@ -925,7 +893,7 @@ static int bcm_enet_open(struct net_devi
ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
if (ret)
@@ -77,7 +77,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
dev->name, dev);
-@@ -1127,9 +1095,6 @@ out_freeirq_rx:
+@@ -1128,9 +1096,6 @@ out_freeirq_rx:
out_freeirq:
free_irq(dev->irq, dev);
@@ -87,7 +87,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return ret;
}
-@@ -1234,12 +1199,6 @@ static int bcm_enet_stop(struct net_devi
+@@ -1235,12 +1200,6 @@ static int bcm_enet_stop(struct net_devi
free_irq(priv->irq_rx, dev);
free_irq(dev->irq, dev);
@@ -100,7 +100,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return 0;
}
-@@ -1830,6 +1789,8 @@ static int bcm_enet_probe(struct platfor
+@@ -1831,6 +1790,8 @@ static int bcm_enet_probe(struct platfor
/* MII bus registration */
if (priv->has_phy) {
@@ -109,7 +109,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
priv->mii_bus = mdiobus_alloc();
if (!priv->mii_bus) {
-@@ -1867,6 +1828,38 @@ static int bcm_enet_probe(struct platfor
+@@ -1868,6 +1829,38 @@ static int bcm_enet_probe(struct platfor
dev_err(&pdev->dev, "unable to register mdio bus\n");
goto out_free_mdio;
}
@@ -148,7 +148,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
} else {
/* run platform code to initialize PHY device */
-@@ -1912,6 +1905,9 @@ static int bcm_enet_probe(struct platfor
+@@ -1913,6 +1906,9 @@ static int bcm_enet_probe(struct platfor
return 0;
out_unregister_mdio:
@@ -158,7 +158,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
if (priv->mii_bus)
mdiobus_unregister(priv->mii_bus);
-@@ -1953,6 +1949,8 @@ static int bcm_enet_remove(struct platfo
+@@ -1954,6 +1950,8 @@ static int bcm_enet_remove(struct platfo
enet_writel(priv, 0, ENET_MIISC_REG);
if (priv->has_phy) {
diff --git a/target/linux/brcm63xx/patches-3.18/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.18/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
index 0a97b25..2f2eecf 100644
--- a/target/linux/brcm63xx/patches-3.18/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
+++ b/target/linux/brcm63xx/patches-3.18/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
@@ -32,7 +32,7 @@ Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
#define ENETSW_MDIOC_EXT_MASK (1 << 16)
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2224,6 +2224,18 @@ static int bcm_enetsw_open(struct net_de
+@@ -2225,6 +2225,18 @@ static int bcm_enetsw_open(struct net_de
priv->sw_port_link[i] = 0;
}
diff --git a/target/linux/brcm63xx/patches-3.18/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.18/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
index bcb92a1..0960005 100644
--- a/target/linux/brcm63xx/patches-3.18/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
+++ b/target/linux/brcm63xx/patches-3.18/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
@@ -26,7 +26,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
#if CONFIG_OF
if (of_have_populated_dt()) {
-@@ -293,6 +295,10 @@ int __init board_register_devices(void)
+@@ -296,6 +298,10 @@ int __init board_register_devices(void)
platform_device_register(&bcm63xx_gpio_keys_device);
}
@@ -39,7 +39,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -9,6 +9,7 @@
+@@ -10,6 +10,7 @@
#include <bcm63xx_dev_usb_usbd.h>
#include <bcm63xx_dev_dsp.h>
#include <bcm63xx_fallback_sprom.h>
@@ -47,7 +47,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
/*
* flash mapping
-@@ -16,6 +17,11 @@
+@@ -17,6 +18,11 @@
#define BCM963XX_CFE_VERSION_OFFSET 0x570
#define BCM963XX_NVRAM_OFFSET 0x580
@@ -59,7 +59,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
/*
* board definition
*/
-@@ -36,6 +42,10 @@ struct board_info {
+@@ -37,6 +43,10 @@ struct board_info {
unsigned int has_uart0:1;
unsigned int has_uart1:1;
unsigned int use_fallback_sprom:1;
diff --git a/target/linux/brcm63xx/patches-3.18/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.18/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
index fdcfa19..b329c31 100644
--- a/target/linux/brcm63xx/patches-3.18/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
+++ b/target/linux/brcm63xx/patches-3.18/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
@@ -11,7 +11,7 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -267,7 +267,7 @@ int __init board_register_devices(void)
+@@ -269,7 +269,7 @@ int __init board_register_devices(void)
if (board.num_spis)
spi_register_board_info(board.spis, board.num_spis);
diff --git a/target/linux/brcm63xx/patches-3.18/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.18/420-BCM63XX-add-endian-check-for-ath9k.patch
index 0e01be1..5398c3d 100644
--- a/target/linux/brcm63xx/patches-3.18/420-BCM63XX-add-endian-check-for-ath9k.patch
+++ b/target/linux/brcm63xx/patches-3.18/420-BCM63XX-add-endian-check-for-ath9k.patch
@@ -11,7 +11,7 @@
#endif /* _PCI_ATH9K_FIXUP */
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -20,6 +20,7 @@
+@@ -21,6 +21,7 @@
struct ath9k_caldata {
unsigned int slot;
u32 caldata_offset;
@@ -39,7 +39,7 @@
return;
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -297,7 +297,8 @@ int __init board_register_devices(void)
+@@ -300,7 +300,8 @@ int __init board_register_devices(void)
/* register any fixups */
for (i = 0; i < board.has_caldata; i++)
diff --git a/target/linux/brcm63xx/patches-3.18/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.18/421-BCM63XX-add-led-pin-for-ath9k.patch
index 27ea83f..1310136 100644
--- a/target/linux/brcm63xx/patches-3.18/421-BCM63XX-add-led-pin-for-ath9k.patch
+++ b/target/linux/brcm63xx/patches-3.18/421-BCM63XX-add-led-pin-for-ath9k.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -298,7 +298,7 @@ int __init board_register_devices(void)
+@@ -301,7 +301,7 @@ int __init board_register_devices(void)
/* register any fixups */
for (i = 0; i < board.has_caldata; i++)
pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
@@ -29,7 +29,7 @@
return;
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -21,6 +21,7 @@ struct ath9k_caldata {
+@@ -22,6 +22,7 @@ struct ath9k_caldata {
unsigned int slot;
u32 caldata_offset;
unsigned int endian_check:1;
diff --git a/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
index c07bd32..bff489b 100644
--- a/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
+++ b/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
@@ -36,7 +36,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
#include "board_common.h"
-@@ -296,9 +297,19 @@ int __init board_register_devices(void)
+@@ -299,9 +300,19 @@ int __init board_register_devices(void)
}
/* register any fixups */
@@ -158,7 +158,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -10,6 +10,7 @@
+@@ -11,6 +11,7 @@
#include <bcm63xx_dev_dsp.h>
#include <bcm63xx_fallback_sprom.h>
#include <pci_ath9k_fixup.h>
@@ -166,7 +166,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
/*
* flash mapping
-@@ -17,11 +18,15 @@
+@@ -18,11 +19,15 @@
#define BCM963XX_CFE_VERSION_OFFSET 0x570
#define BCM963XX_NVRAM_OFFSET 0x580
@@ -183,7 +183,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
};
/*
-@@ -47,7 +52,7 @@ struct board_info {
+@@ -48,7 +53,7 @@ struct board_info {
unsigned int has_caldata:2;
/* wifi calibration data config */
diff --git a/target/linux/brcm63xx/patches-3.18/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-3.18/423-bcm63xx_enet_add_b53_support.patch
index 469a365..f7697e1 100644
--- a/target/linux/brcm63xx/patches-3.18/423-bcm63xx_enet_add_b53_support.patch
+++ b/target/linux/brcm63xx/patches-3.18/423-bcm63xx_enet_add_b53_support.patch
@@ -12,15 +12,15 @@
spinlock_t enetsw_mdio_lock;
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
+@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/if_vlan.h>
+ #include <linux/gpio/consumer.h>
+#include <linux/platform_data/b53.h>
#include <bcm63xx_dev_enet.h>
#include "bcm63xx_enet.h"
-@@ -1974,7 +1975,8 @@ static int bcm_enet_remove(struct platfo
+@@ -1975,7 +1976,8 @@ static int bcm_enet_remove(struct platfo
return 0;
}
@@ -30,7 +30,7 @@
.probe = bcm_enet_probe,
.remove = bcm_enet_remove,
.driver = {
-@@ -1983,6 +1985,42 @@ struct platform_driver bcm63xx_enet_driv
+@@ -1984,6 +1986,42 @@ struct platform_driver bcm63xx_enet_driv
},
};
@@ -73,7 +73,7 @@
/*
* switch mii access callbacks
*/
-@@ -2236,29 +2274,6 @@ static int bcm_enetsw_open(struct net_de
+@@ -2237,29 +2275,6 @@ static int bcm_enetsw_open(struct net_de
enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
}
@@ -103,7 +103,7 @@
/* initialize flow control buffer allocation */
enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2718,6 +2733,9 @@ static int bcm_enetsw_probe(struct platf
+@@ -2719,6 +2734,9 @@ static int bcm_enetsw_probe(struct platf
struct bcm63xx_enetsw_platform_data *pd;
struct resource *res_mem;
int ret, irq_rx, irq_tx;
@@ -113,7 +113,7 @@
/* stop if shared driver failed, assume driver->probe will be
* called in the same order we register devices (correct ?)
-@@ -2807,6 +2825,43 @@ static int bcm_enetsw_probe(struct platf
+@@ -2808,6 +2826,43 @@ static int bcm_enetsw_probe(struct platf
priv->pdev = pdev;
priv->net_dev = dev;
@@ -157,7 +157,7 @@
return 0;
out_put_clk:
-@@ -2835,6 +2890,9 @@ static int bcm_enetsw_remove(struct plat
+@@ -2836,6 +2891,9 @@ static int bcm_enetsw_remove(struct plat
priv = netdev_priv(dev);
unregister_netdev(dev);
diff --git a/target/linux/brcm63xx/patches-3.18/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-3.18/424-bcm63xx_enet_no_request_mem_region.patch
index 12e366c..a087308 100644
--- a/target/linux/brcm63xx/patches-3.18/424-bcm63xx_enet_no_request_mem_region.patch
+++ b/target/linux/brcm63xx/patches-3.18/424-bcm63xx_enet_no_request_mem_region.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2780,12 +2780,6 @@ static int bcm_enetsw_probe(struct platf
+@@ -2781,12 +2781,6 @@ static int bcm_enetsw_probe(struct platf
if (ret)
goto out;
diff --git a/target/linux/brcm63xx/patches-3.18/499-allow_better_context_for_board_patches.patch b/target/linux/brcm63xx/patches-3.18/499-allow_better_context_for_board_patches.patch
index 5dcfa9d..1fd4407 100644
--- a/target/linux/brcm63xx/patches-3.18/499-allow_better_context_for_board_patches.patch
+++ b/target/linux/brcm63xx/patches-3.18/499-allow_better_context_for_board_patches.patch
@@ -2,7 +2,7 @@
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -61,7 +61,7 @@ static struct board_info __initdata boar
.ephy_reset_gpio = 36,
- .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
};
-#endif
+#endif /* CONFIG_BCM63XX_CPU_3368 */
diff --git a/target/linux/brcm63xx/patches-3.18/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/brcm63xx/patches-3.18/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
index 3414379..9775970 100644
--- a/target/linux/brcm63xx/patches-3.18/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
+++ b/target/linux/brcm63xx/patches-3.18/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
@@ -57,7 +57,7 @@ Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
#endif /* __BOARD_COMMON_H */
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,215 @@
+@@ -0,0 +1,212 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -111,7 +111,7 @@ Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
+ },
+
+ .ephy_reset_gpio = 6,
-+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
@@ -168,9 +168,6 @@ Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
+ },
+
+ },
-+
-+ .ephy_reset_gpio = 6,
-+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
+};
+#endif
+
diff --git a/target/linux/brcm63xx/patches-3.18/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.18/519_board_CPVA502plus.patch
index d7a8087..58a793f 100644
--- a/target/linux/brcm63xx/patches-3.18/519_board_CPVA502plus.patch
+++ b/target/linux/brcm63xx/patches-3.18/519_board_CPVA502plus.patch
@@ -36,7 +36,7 @@
+ },
+
+ .ephy_reset_gpio = 4,
-+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
+};
static struct board_info __initdata board_ct536_ct5621 = {