diff options
Diffstat (limited to 'target/linux/brcm63xx')
8 files changed, 11 insertions, 57 deletions
diff --git a/target/linux/brcm63xx/patches-2.6.39/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-2.6.39/011-add_bcm63xx_ehci_controller.patch index 1acbab0..284cd37 100644 --- a/target/linux/brcm63xx/patches-2.6.39/011-add_bcm63xx_ehci_controller.patch +++ b/target/linux/brcm63xx/patches-2.6.39/011-add_bcm63xx_ehci_controller.patch @@ -7,7 +7,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr> --- /dev/null +++ b/drivers/usb/host/ehci-bcm63xx.c -@@ -0,0 +1,154 @@ +@@ -0,0 +1,155 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -121,6 +121,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr> + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + ehci->sbrn = 0x20; ++ ehci->ignore_oc = 1; + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (ret) diff --git a/target/linux/brcm63xx/patches-2.6.39/210-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-2.6.39/210-no_ehci_over_current_check.patch deleted file mode 100644 index cfdf165..0000000 --- a/target/linux/brcm63xx/patches-2.6.39/210-no_ehci_over_current_check.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -883,11 +883,13 @@ static int ehci_hub_control ( - * power switching; they're allowed to just limit the - * current. khubd will turn the power back on. - */ -+#ifndef CONFIG_BCM63XX - if (HCS_PPC (ehci->hcs_params)){ - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); - } -+#endif - } - - /* whoever resumes must GetPortStatus to complete it!! */ diff --git a/target/linux/brcm63xx/patches-2.6.39/230-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-2.6.39/230-6358-enet1-external-mii-clk.patch index f4c1ed9..f064609 100644 --- a/target/linux/brcm63xx/patches-2.6.39/230-6358-enet1-external-mii-clk.patch +++ b/target/linux/brcm63xx/patches-2.6.39/230-6358-enet1-external-mii-clk.patch @@ -11,7 +11,7 @@ bcm_gpio_writel(val, GPIO_MODE_REG); --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -402,6 +402,8 @@ +@@ -401,6 +401,8 @@ #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) #define GPIO_MODE_6358_SERIAL_LED (1 << 10) #define GPIO_MODE_6358_UTOPIA (1 << 12) diff --git a/target/linux/brcm63xx/patches-2.6.39/240-spi.patch b/target/linux/brcm63xx/patches-2.6.39/240-spi.patch index b30190e..454bbb6 100644 --- a/target/linux/brcm63xx/patches-2.6.39/240-spi.patch +++ b/target/linux/brcm63xx/patches-2.6.39/240-spi.patch @@ -170,7 +170,7 @@ #define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -773,4 +773,116 @@ +@@ -805,4 +805,116 @@ #define DMIPSPLLCFG_N2_SHIFT 29 #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) diff --git a/target/linux/brcm63xx/patches-3.0/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-3.0/011-add_bcm63xx_ehci_controller.patch index b313834..913bf36 100644 --- a/target/linux/brcm63xx/patches-3.0/011-add_bcm63xx_ehci_controller.patch +++ b/target/linux/brcm63xx/patches-3.0/011-add_bcm63xx_ehci_controller.patch @@ -7,7 +7,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr> --- /dev/null +++ b/drivers/usb/host/ehci-bcm63xx.c -@@ -0,0 +1,154 @@ +@@ -0,0 +1,155 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -118,9 +118,10 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr> + ehci->big_endian_desc = 0; + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + -+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + ehci->sbrn = 0x20; ++ ehci->ignore_oc = 1; + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (ret) @@ -164,7 +165,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr> +MODULE_ALIAS("platform:bcm63xx_ehci"); --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c -@@ -1286,6 +1286,11 @@ MODULE_LICENSE ("GPL"); +@@ -1284,6 +1284,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_grlib_driver #endif diff --git a/target/linux/brcm63xx/patches-3.0/210-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-3.0/210-no_ehci_over_current_check.patch deleted file mode 100644 index f2c10da..0000000 --- a/target/linux/brcm63xx/patches-3.0/210-no_ehci_over_current_check.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -891,11 +891,13 @@ static int ehci_hub_control ( - * power switching; they're allowed to just limit the - * current. khubd will turn the power back on. - */ -+#ifndef CONFIG_BCM63XX - if (HCS_PPC (ehci->hcs_params)){ - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); - } -+#endif - } - - /* whoever resumes must GetPortStatus to complete it!! */ diff --git a/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch index 397562c..62c39c3 100644 --- a/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch +++ b/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch @@ -7,7 +7,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr> --- /dev/null +++ b/drivers/usb/host/ehci-bcm63xx.c -@@ -0,0 +1,154 @@ +@@ -0,0 +1,155 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -118,9 +118,10 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr> + ehci->big_endian_desc = 0; + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + -+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + ehci->sbrn = 0x20; ++ ehci->ignore_oc = 1; + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (ret) diff --git a/target/linux/brcm63xx/patches-3.1/210-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-3.1/210-no_ehci_over_current_check.patch deleted file mode 100644 index bb5d9e7..0000000 --- a/target/linux/brcm63xx/patches-3.1/210-no_ehci_over_current_check.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -816,12 +816,14 @@ static int ehci_hub_control ( - * power switching; they're allowed to just limit the - * current. khubd will turn the power back on. - */ -+#ifndef CONFIG_BCM63XX - if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) { - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); - temp = ehci_readl(ehci, status_reg); - } -+#endif - } - - /* whoever resumes must GetPortStatus to complete it!! */ |