summaryrefslogtreecommitdiff
path: root/target/linux/cns3xxx/patches-3.1/050-cns3xxx_i2c_controller.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/cns3xxx/patches-3.1/050-cns3xxx_i2c_controller.patch')
-rw-r--r--target/linux/cns3xxx/patches-3.1/050-cns3xxx_i2c_controller.patch421
1 files changed, 421 insertions, 0 deletions
diff --git a/target/linux/cns3xxx/patches-3.1/050-cns3xxx_i2c_controller.patch b/target/linux/cns3xxx/patches-3.1/050-cns3xxx_i2c_controller.patch
new file mode 100644
index 0000000..febbc1e
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.1/050-cns3xxx_i2c_controller.patch
@@ -0,0 +1,421 @@
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -327,6 +327,18 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
+ help
+ The unit of the TWI clock is kHz.
+
++config I2C_CNS3XXX
++ tristate "Cavium CNS3xxx I2C driver"
++ depends on ARCH_CNS3XXX
++ help
++ Support for Cavium CNS3xxx I2C controller driver.
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-cns3xxx.
++
++ Please note that this driver might be needed to bring up other
++ devices such as Cavium CNS3xxx Ethernet.
++
+ config I2C_CPM
+ tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
+ depends on (CPM1 || CPM2) && OF_I2C
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -80,6 +80,7 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor
+ obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
+ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
+ obj-$(CONFIG_I2C_STUB) += i2c-stub.o
++obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
+
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-cns3xxx.c
+@@ -0,0 +1,387 @@
++/*
++ * Cavium CNS3xxx I2C Host Controller
++ *
++ * Copyright 2010 Cavium Network
++ * Copyright 2011 Gateworks Corporation
++ * Chris Lang <clang@gateworks.com>
++ *
++ * This file is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License, Version 2, as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <asm/io.h>
++#include <linux/wait.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/slab.h>
++#include <mach/pm.h>
++#include <mach/cns3xxx.h>
++
++/*
++ * We need the memory map
++ */
++
++
++#define MISC_MEM_MAP_VALUE(reg_offset) (*((uint32_t volatile *)(CNS3XXX_MISC_BASE_VIRT + reg_offset)))
++#define MISC_IOCDB_CTRL MISC_MEM_MAP_VALUE(0x020)
++
++#define I2C_MEM_MAP_ADDR(x) (CNS3XXX_SSP_BASE_VIRT + x)
++#define I2C_MEM_MAP_VALUE(x) (*((unsigned int volatile*)I2C_MEM_MAP_ADDR(x)))
++
++#define I2C_CONTROLLER_REG I2C_MEM_MAP_VALUE(0x20)
++#define I2C_TIME_OUT_REG I2C_MEM_MAP_VALUE(0x24)
++#define I2C_SLAVE_ADDRESS_REG I2C_MEM_MAP_VALUE(0x28)
++#define I2C_WRITE_DATA_REG I2C_MEM_MAP_VALUE(0x2C)
++#define I2C_READ_DATA_REG I2C_MEM_MAP_VALUE(0x30)
++#define I2C_INTERRUPT_STATUS_REG I2C_MEM_MAP_VALUE(0x34)
++#define I2C_INTERRUPT_ENABLE_REG I2C_MEM_MAP_VALUE(0x38)
++#define I2C_TWI_OUT_DLY_REG I2C_MEM_MAP_VALUE(0x3C)
++
++#define I2C_BUS_ERROR_FLAG (0x1)
++#define I2C_ACTION_DONE_FLAG (0x2)
++
++#define CNS3xxx_I2C_ENABLE() (I2C_CONTROLLER_REG) |= ((unsigned int)0x1 << 31)
++#define CNS3xxx_I2C_DISABLE() (I2C_CONTROLLER_REG) &= ~((unsigned int)0x1 << 31)
++#define CNS3xxx_I2C_ENABLE_INTR() (I2C_INTERRUPT_ENABLE_REG) |= 0x03
++#define CNS3xxx_I2C_DISABLE_INTR() (I2C_INTERRUPT_ENABLE_REG) &= 0xfc
++
++#define TWI_TIMEOUT (10*HZ)
++#define I2C_100KHZ 100000
++#define I2C_200KHZ 200000
++#define I2C_300KHZ 300000
++#define I2C_400KHZ 400000
++
++#define CNS3xxx_I2C_CLK I2C_100KHZ
++
++#define STATE_DONE 1
++#define STATE_ERROR 2
++
++struct cns3xxx_i2c {
++ void __iomem *base;
++ wait_queue_head_t wait;
++ struct i2c_adapter adap;
++ struct i2c_msg *msg;
++ int state; /* see STATE_ */
++ int rd_wr_len;
++ u8 *buf;
++};
++
++static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static int
++cns3xxx_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg)
++{
++ struct cns3xxx_i2c *i2c = i2c_get_adapdata(adap);
++ int i, j;
++ u8 buf[1] = { 0 };
++
++ if (msg->len == 0) {
++ /*
++ * We are probably doing a probe for a device here,
++ * so set the length to one, and data to 0
++ */
++ msg->len = 1;
++ i2c->buf = buf;
++ } else {
++ i2c->buf = msg->buf;
++ }
++
++ if (msg->flags & I2C_M_TEN) {
++ printk
++ ("%s:%d: Presently the driver does not handle extended addressing\n",
++ __FUNCTION__, __LINE__);
++ return -EINVAL;
++ }
++ i2c->msg = msg;
++
++ for (i = 0; i < msg->len; i++) {
++ if (msg->len - i >= 4)
++ i2c->rd_wr_len = 3;
++ else
++ i2c->rd_wr_len = msg->len - i - 1;
++
++ // Set Data Width and TWI_EN
++ I2C_CONTROLLER_REG = 0x80000000 | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
++
++ // Clear Write Reg
++ I2C_WRITE_DATA_REG = 0;
++
++ // Set the slave address
++ I2C_SLAVE_ADDRESS_REG = (msg->addr << 1);
++
++ // Are we Writing
++ if (!(msg->flags & I2C_M_RD)) {
++ I2C_CONTROLLER_REG |= (1 << 4);
++ if (i != 0) {
++ /*
++ * We need to set the address in the first byte.
++ * The base address is going to be in buf[0] and then
++ * it needs to be incremented by i - 1.
++ */
++ i2c->buf--;
++ *i2c->buf = buf[0] + i - 1;
++
++ if (i2c->rd_wr_len < 3) {
++ i += i2c->rd_wr_len;
++ i2c->rd_wr_len++;
++ I2C_CONTROLLER_REG = 0x80000000 | (1 << 4) | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
++ } else {
++ i += i2c->rd_wr_len - 1;
++ }
++ } else {
++ i += i2c->rd_wr_len;
++ buf[0] = *i2c->buf;
++ }
++ for (j = 0; j <= i2c->rd_wr_len; j++) {
++ I2C_WRITE_DATA_REG |= ((*i2c->buf++) << (8 * j));
++ }
++ } else {
++ i += i2c->rd_wr_len;
++ }
++
++ // Start the Transfer
++ i2c->state = 0; // Clear out the State
++ I2C_CONTROLLER_REG |= (1 << 6);
++
++ if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
++ (i2c->state == STATE_DONE), TWI_TIMEOUT)) {
++ if (i2c->state == STATE_ERROR) {
++ return -EIO;
++ }
++ } else {
++ return -ETIMEDOUT;
++ }
++ }
++ return 0;
++}
++
++static int
++cns3xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
++{
++ int i;
++ int ret;
++ for (i = 0; i < num; i++)
++ {
++ ret = cns3xxx_i2c_xfer_msg(adap, &msgs[i]);
++ if (ret < 0) {
++ return ret;
++ }
++ }
++ return num;
++}
++
++
++static struct i2c_algorithm cns3xxx_i2c_algo = {
++ .master_xfer = cns3xxx_i2c_xfer,
++ .functionality = cns3xxx_i2c_func,
++};
++
++static struct i2c_adapter cns3xxx_i2c_adapter = {
++ .owner = THIS_MODULE,
++ .algo = &cns3xxx_i2c_algo,
++ .algo_data = NULL,
++ .nr = 0,
++ .name = "CNS3xxx I2C 0",
++ .retries = 5,
++};
++
++static void cns3xxx_i2c_adapter_init(struct cns3xxx_i2c *i2c)
++{
++ cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
++ cns3xxx_pwr_power_up(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
++ cns3xxx_pwr_soft_rst(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
++
++ /* Disable the I2C */
++ I2C_CONTROLLER_REG = 0; /* Disabled the I2C */
++
++ //enable SCL and SDA which share pin with GPIOB_PIN_EN(0x18)
++ //GPIOB[12]: SCL
++ //GPIOB[13]: SDA
++ (*(u32*)(CNS3XXX_MISC_BASE_VIRT+0x18)) |= ((1<<12)|(1<<13));
++
++ MISC_IOCDB_CTRL &= ~0x300;
++ MISC_IOCDB_CTRL |= 0x300; //21mA...
++
++ /* Check the Reg Dump when testing */
++ I2C_TIME_OUT_REG =
++ ((((((cns3xxx_cpu_clock()*(1000000/8)) / (2 * CNS3xxx_I2C_CLK)) -
++ 1) & 0x3FF) << 8) | (1 << 7) | 0x7F);
++ I2C_TWI_OUT_DLY_REG |= 0x3;
++
++ /* Enable The Interrupt */
++ CNS3xxx_I2C_ENABLE_INTR();
++
++ /* Clear Interrupt Status (0x2 | 0x1) */
++ I2C_INTERRUPT_STATUS_REG |= (I2C_ACTION_DONE_FLAG | I2C_BUS_ERROR_FLAG);
++
++ /* Enable the I2C Controller */
++ CNS3xxx_I2C_ENABLE();
++}
++
++static irqreturn_t cns3xxx_i2c_isr(int irq, void *dev_id)
++{
++ struct cns3xxx_i2c *i2c = dev_id;
++ int i;
++ uint32_t stat = I2C_INTERRUPT_STATUS_REG;
++
++ /* Clear Interrupt */
++ I2C_INTERRUPT_STATUS_REG |= 0x1;
++
++ if (stat & I2C_BUS_ERROR_FLAG) {
++ i2c->state = STATE_ERROR;
++ } else {
++ if (i2c->msg->flags & I2C_M_RD) {
++ for (i = 0; i <= i2c->rd_wr_len; i++)
++ {
++ *i2c->buf++ = ((I2C_READ_DATA_REG >> (8 * i)) & 0xff);
++ }
++ }
++ i2c->state = STATE_DONE;
++ }
++ wake_up(&i2c->wait);
++ return IRQ_HANDLED;
++}
++
++static int __devinit cns3xxx_i2c_probe(struct platform_device *pdev)
++{
++ struct cns3xxx_i2c *i2c;
++ struct resource *res, *res2;
++ int ret;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ printk("%s: IORESOURCE_MEM not defined \n", __FUNCTION__);
++ return -ENODEV;
++ }
++
++ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (!res2) {
++ printk("%s: IORESOURCE_IRQ not defined \n", __FUNCTION__);
++ return -ENODEV;
++ }
++
++ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
++ if (!i2c)
++ return -ENOMEM;
++
++ if (!request_mem_region(res->start, res->end - res->start + 1,
++ pdev->name)) {
++ dev_err(&pdev->dev, "Memory region busy\n");
++ ret = -EBUSY;
++ goto request_mem_failed;
++ }
++
++ i2c->base = ioremap(res->start, res->end - res->start + 1);
++ if (!i2c->base) {
++ dev_err(&pdev->dev, "Unable to map registers\n");
++ ret = -EIO;
++ goto map_failed;
++ }
++
++ cns3xxx_i2c_adapter_init(i2c);
++
++ init_waitqueue_head(&i2c->wait);
++ ret = request_irq(res2->start, cns3xxx_i2c_isr, 0, pdev->name, i2c);
++ if (ret) {
++ dev_err(&pdev->dev, "Cannot claim IRQ\n");
++ goto request_irq_failed;
++ }
++
++ platform_set_drvdata(pdev, i2c);
++ i2c->adap = cns3xxx_i2c_adapter;
++ i2c_set_adapdata(&i2c->adap, i2c);
++ i2c->adap.dev.parent = &pdev->dev;
++
++ /* add i2c adapter to i2c tree */
++ ret = i2c_add_numbered_adapter(&i2c->adap);
++ if (ret) {
++ dev_err(&pdev->dev, "Failed to add adapter\n");
++ goto add_adapter_failed;
++ }
++
++ return 0;
++
++ add_adapter_failed:
++ free_irq(res2->start, i2c);
++ request_irq_failed:
++ iounmap(i2c->base);
++ map_failed:
++ release_mem_region(res->start, res->end - res->start + 1);
++ request_mem_failed:
++ kfree(i2c);
++
++ return ret;
++}
++
++static int __devexit cns3xxx_i2c_remove(struct platform_device *pdev)
++{
++ struct cns3xxx_i2c *i2c = platform_get_drvdata(pdev);
++ struct resource *res;
++
++ /* disable i2c logic */
++ CNS3xxx_I2C_DISABLE_INTR();
++ CNS3xxx_I2C_DISABLE();
++ /* remove adapter & data */
++ i2c_del_adapter(&i2c->adap);
++ platform_set_drvdata(pdev, NULL);
++
++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (res)
++ free_irq(res->start, i2c);
++
++ iounmap(i2c->base);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (res)
++ release_mem_region(res->start, res->end - res->start + 1);
++
++ kfree(i2c);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++#warning "CONFIG_PM defined: suspend and resume not implemented"
++#define cns3xxx_i2c_suspend NULL
++#define cns3xxx_i2c_resume NULL
++#else
++#define cns3xxx_i2c_suspend NULL
++#define cns3xxx_i2c_resume NULL
++#endif
++
++static struct platform_driver cns3xxx_i2c_driver = {
++ .probe = cns3xxx_i2c_probe,
++ .remove = cns3xxx_i2c_remove,
++ .suspend = cns3xxx_i2c_suspend,
++ .resume = cns3xxx_i2c_resume,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "cns3xxx-i2c",
++ },
++};
++
++static int __init cns3xxx_i2c_init(void)
++{
++ return platform_driver_register(&cns3xxx_i2c_driver);
++}
++
++static void __exit cns3xxx_i2c_exit(void)
++{
++ platform_driver_unregister(&cns3xxx_i2c_driver);
++}
++
++module_init(cns3xxx_i2c_init);
++module_exit(cns3xxx_i2c_exit);
++
++MODULE_AUTHOR("Cavium Networks");
++MODULE_DESCRIPTION("Cavium CNS3XXX I2C Controller");
++MODULE_LICENSE("GPL");
generated by cgit v1.1 at 2024-11-25 17:54:17 +0000