diff options
Diffstat (limited to 'target/linux/coldfire/patches/001-cf.patch')
| -rw-r--r-- | target/linux/coldfire/patches/001-cf.patch | 51053 |
1 files changed, 0 insertions, 51053 deletions
diff --git a/target/linux/coldfire/patches/001-cf.patch b/target/linux/coldfire/patches/001-cf.patch deleted file mode 100644 index 66417e7..0000000 --- a/target/linux/coldfire/patches/001-cf.patch +++ /dev/null @@ -1,51053 +0,0 @@ ---- /dev/null -+++ b/arch/m68k/coldfire/cache.c -@@ -0,0 +1,43 @@ -+/* -+ * linux/arch/m68k/coldfire/cache.c -+ * -+ * Matt Waddel Matt.Waddel@freescale.com -+ * Kurt Mahan kmahan@freescale.com -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include <linux/interrupt.h> -+#include <asm/cfcache.h> -+#include <asm/coldfire.h> -+#include <asm/system.h> -+ -+/* Cache Control Reg shadow reg */ -+unsigned long shadow_cacr; -+ -+/** -+ * cacr_set - Set the Cache Control Register -+ * @x Value to set -+ */ -+void cacr_set(unsigned long x) -+{ -+ shadow_cacr = x; -+ -+ __asm__ __volatile__ ("movec %0, %%cacr" -+ : /* no outputs */ -+ : "r" (shadow_cacr)); -+} -+ -+/** -+ * cacr_get - Get the current value of the Cache Control Register -+ * -+ * @return CACR value -+ */ -+unsigned long cacr_get(void) -+{ -+ return shadow_cacr; -+} ---- /dev/null -+++ b/arch/m68k/coldfire/config.c -@@ -0,0 +1,483 @@ -+/* -+ * linux/arch/m68k/coldfire/config.c -+ * -+ * Kurt Mahan kmahan@freescale.com -+ * Matt Waddel Matt.Waddel@freescale.com -+ * Copyright Freescale Semiconductor, Inc. 2007, 2008 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/string.h> -+#include <linux/kernel.h> -+#include <linux/console.h> -+#include <linux/bootmem.h> -+#include <linux/mm.h> -+#include <asm/bootinfo.h> -+#include <asm/machdep.h> -+#include <asm/coldfire.h> -+#include <asm/cfcache.h> -+#include <asm/cacheflush.h> -+#include <asm/io.h> -+#include <asm/cfmmu.h> -+#include <asm/setup.h> -+#include <asm/irq.h> -+#include <asm/traps.h> -+#include <asm/movs.h> -+#include <asm/movs.h> -+#include <asm/page.h> -+#include <asm/pgalloc.h> -+ -+#include <asm/mcfsim.h> -+ -+#if defined(CONFIG_M5445X) -+#define UBOOT_EXTRA_CLOCKS -+#elif defined(CONFIG_M547X_8X) -+#define UBOOT_PCI -+#endif -+#include <asm/bootinfo.h> -+ -+#ifdef CONFIG_M5445X -+#include <asm/mcf5445x_intc.h> -+#include <asm/mcf5445x_sdramc.h> -+#include <asm/mcf5445x_fbcs.h> -+#include <asm/mcf5445x_dtim.h> -+#include <asm/mcf5445x_xbs.h> -+#endif -+ -+#ifdef CONFIG_M547X_8X -+#include <asm/m5485gpt.h> -+#endif -+ -+extern int get_irq_list(struct seq_file *p, void *v); -+extern char _text, _end; -+extern char _etext, _edata, __init_begin, __init_end; -+extern struct console mcfrs_console; -+extern char m68k_command_line[CL_SIZE]; -+extern unsigned long availmem; -+ -+static int irq_enable[NR_IRQS]; -+unsigned long num_pages; -+ -+/* ethernet mac addresses from uboot */ -+unsigned char uboot_enet0[6]; -+unsigned char uboot_enet1[6]; -+ -+void coldfire_sort_memrec(void) -+{ -+ int i, j; -+ -+ /* Sort the m68k_memory records by address */ -+ for (i = 0; i < m68k_num_memory; ++i) { -+ for (j = i + 1; j < m68k_num_memory; ++j) { -+ if (m68k_memory[i].addr > m68k_memory[j].addr) { -+ struct mem_info tmp; -+ tmp = m68k_memory[i]; -+ m68k_memory[i] = m68k_memory[j]; -+ m68k_memory[j] = tmp; -+ } -+ } -+ } -+ /* Trim off discontiguous bits */ -+ for (i = 1; i < m68k_num_memory; ++i) { -+ if ((m68k_memory[i-1].addr + m68k_memory[i-1].size) != -+ m68k_memory[i].addr) { -+ printk(KERN_DEBUG "m68k_parse_bootinfo: addr gap between \ -+ 0x%lx & 0x%lx\n", -+ m68k_memory[i-1].addr+m68k_memory[i-1].size, -+ m68k_memory[i].addr); -+ m68k_num_memory = i; -+ break; -+ } -+ } -+} -+ -+/* -+ * UBoot Handler -+ */ -+int __init uboot_commandline(char *bootargs) -+{ -+ int len = 0, cmd_line_len; -+ static struct uboot_record uboot_info; -+ u32 offset = PAGE_OFFSET_RAW - PHYS_OFFSET; -+ -+ extern unsigned long uboot_info_stk; -+ -+ /* validate address */ -+ if ((uboot_info_stk < PAGE_OFFSET_RAW) || -+ (uboot_info_stk >= (PAGE_OFFSET_RAW + CONFIG_SDRAM_SIZE))) -+ return 0; -+ -+ /* Add offset to get post-remapped kernel memory location */ -+ uboot_info.bdi = (struct bd_info *)((*(u32 *)(uboot_info_stk)) + offset); -+ uboot_info.initrd_start = (*(u32 *)(uboot_info_stk+4)) + offset; -+ uboot_info.initrd_end = (*(u32 *)(uboot_info_stk+8)) + offset; -+ uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset; -+ uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset; -+ -+ /* copy over mac addresses */ -+ memcpy(uboot_enet0, uboot_info.bdi->bi_enet0addr, 6); -+ memcpy(uboot_enet1, uboot_info.bdi->bi_enet1addr, 6); -+ -+ /* copy command line */ -+ cmd_line_len = uboot_info.cmd_line_stop - uboot_info.cmd_line_start; -+ if ((cmd_line_len > 0) && (cmd_line_len < CL_SIZE-1)) -+ len = (int)strncpy(bootargs, (char *)uboot_info.cmd_line_start,\ -+ cmd_line_len); -+ -+ return len; -+} -+ -+/* -+ * This routine does things not done in the bootloader. -+ */ -+#if defined(CONFIG_M54451) -+#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.51:172.27.155.1" -+#elif defined(CONFIG_M54455) -+#define MTD_DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" -+#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.55:172.27.155.1" -+#elif defined(CONFIG_M547X_8X) -+#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.75:172.27.155.1" -+#endif -+asmlinkage void __init cf_early_init(void) -+{ -+ struct bi_record *record = (struct bi_record *) &_end; -+ -+ extern char _end; -+ -+#if defined(CONFIG_M5445X) -+ SET_VBR((void *)MCF_RAMBAR1); -+#elif defined(CONFIG_M547X_8X) -+ SET_VBR((void *)MCF_RAMBAR0); -+#endif -+ -+ /* Mask all interrupts */ -+#if defined(CONFIG_M5445X) -+ MCF_INTC0_IMRL = 0xFFFFFFFF; -+ MCF_INTC0_IMRH = 0xFFFFFFFF; -+ MCF_INTC1_IMRL = 0xFFFFFFFF; -+ MCF_INTC1_IMRH = 0xFFFFFFFF; -+#elif defined(CONFIG_M547X_8X) -+ MCF_IMRL = 0xFFFFFFFF; -+ MCF_IMRH = 0xFFFFFFFF; -+#endif -+ -+#if defined(CONFIG_M5445X) -+#if defined(CONFIG_NOR_FLASH_BASE) -+ MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE; -+#else -+ MCF_FBCS_CSAR(1) = 0x00000000; -+#endif -+ -+#if CONFIG_SDRAM_SIZE > (256*1024*1024) -+ /* Init optional SDRAM chip select */ -+ MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B; -+#endif -+#endif /* CONFIG_M5445X */ -+ -+#if defined(CONFIG_M5445X) -+ /* Setup SDRAM crossbar(XBS) priorities */ -+ MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) | -+ MCF_XBS_PRS_M1(MCF_XBS_PRI_3) | -+ MCF_XBS_PRS_M2(MCF_XBS_PRI_4) | -+ MCF_XBS_PRS_M3(MCF_XBS_PRI_5) | -+ MCF_XBS_PRS_M5(MCF_XBS_PRI_6) | -+ MCF_XBS_PRS_M6(MCF_XBS_PRI_1) | -+ MCF_XBS_PRS_M7(MCF_XBS_PRI_7)); -+#endif -+ -+ m68k_machtype = MACH_CFMMU; -+ m68k_fputype = FPU_CFV4E; -+ m68k_mmutype = MMU_CFV4E; -+ m68k_cputype = CPU_CFV4E; -+ -+ m68k_num_memory = 0; -+ m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE; -+ m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE; -+ -+ if (!uboot_commandline(m68k_command_line)) { -+#if defined(CONFIG_BOOTPARAM) -+ strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1); -+#else -+ strcpy(m68k_command_line, DEFAULT_COMMAND_LINE); -+#endif -+ } -+ -+#if defined(CONFIG_BLK_DEV_INITRD) -+ /* add initrd image */ -+ record = (struct bi_record *) ((void *)record + record->size); -+ record->tag = BI_RAMDISK; -+ record->size = sizeof(record->tag) + sizeof(record->size) -+ + sizeof(record->data[0]) + sizeof(record->data[1]); -+#endif -+ -+ /* Mark end of tags. */ -+ record = (struct bi_record *) ((void *) record + record->size); -+ record->tag = 0; -+ record->data[0] = 0; -+ record->data[1] = 0; -+ record->size = sizeof(record->tag) + sizeof(record->size) -+ + sizeof(record->data[0]) + sizeof(record->data[1]); -+ -+ /* Invalidate caches via CACR */ -+ flush_bcache(); -+ cacr_set(CACHE_DISABLE_MODE); -+ -+ /* Turn on caches via CACR, enable EUSP */ -+ cacr_set(CACHE_INITIAL_MODE); -+ -+} -+ -+#if defined(CONFIG_M5445X) -+void settimericr(unsigned int timer, unsigned int level) -+{ -+ volatile unsigned char *icrp; -+ unsigned int icr; -+ unsigned char irq; -+ -+ if (timer <= 2) { -+ switch (timer) { -+ case 2: irq = 33; icr = MCFSIM_ICR_TIMER2; break; -+ default: irq = 32; icr = MCFSIM_ICR_TIMER1; break; -+ } -+ -+ icrp = (volatile unsigned char *) (icr); -+ *icrp = level; -+ coldfire_enable_irq0(irq); -+ } -+} -+#endif -+ -+/* Assembler routines */ -+asmlinkage void buserr(void); -+asmlinkage void trap(void); -+asmlinkage void system_call(void); -+asmlinkage void inthandler(void); -+ -+void __init coldfire_trap_init(void) -+{ -+ int i = 0; -+ e_vector *vectors; -+ -+#if defined(CONFIG_M5445X) -+ vectors = (e_vector *)MCF_RAMBAR1; -+#elif defined(CONFIG_M547X_8X) -+ vectors = (e_vector *)MCF_RAMBAR0; -+#endif -+ /* -+ * There is a common trap handler and common interrupt -+ * handler that handle almost every vector. We treat -+ * the system call and bus error special, they get their -+ * own first level handlers. -+ */ -+ for (i = 3; (i <= 23); i++) -+ vectors[i] = trap; -+ for (i = 33; (i <= 63); i++) -+ vectors[i] = trap; -+ for (i = 24; (i <= 31); i++) -+ vectors[i] = inthandler; -+ for (i = 64; (i < 255); i++) -+ vectors[i] = inthandler; -+ -+ vectors[255] = 0; -+ vectors[2] = buserr; -+ vectors[32] = system_call; -+} -+ -+#if defined(CONFIG_M5445X) -+ -+void coldfire_tick(void) -+{ -+ /* Reset the ColdFire timer */ -+ __raw_writeb(MCF_DTIM_DTER_CAP | MCF_DTIM_DTER_REF, MCF_DTIM0_DTER); -+} -+ -+void __init coldfire_sched_init(irq_handler_t handler) -+{ -+ unsigned int mcf_timerlevel = 5; -+ unsigned int mcf_timervector = 64+32; -+ -+ __raw_writew(MCF_DTIM_DTMR_RST_RST, MCF_DTIM0_DTMR); -+ __raw_writel(((MCF_BUSCLK / 16) / HZ), MCF_DTIM0_DTRR); -+ __raw_writew(MCF_DTIM_DTMR_ORRI | MCF_DTIM_DTMR_CLK_DIV16 | -+ MCF_DTIM_DTMR_FRR | MCF_DTIM_DTMR_RST_EN, \ -+ MCF_DTIM0_DTMR); -+ -+ request_irq(mcf_timervector, handler, IRQF_DISABLED, \ -+ "timer", (void *)MCF_DTIM0_DTMR); -+ -+ settimericr(1, mcf_timerlevel); -+} -+ -+int timerirqpending(int timer) -+{ -+ unsigned int imr = 0; -+ -+ switch (timer) { -+ case 1: imr = 0x1; break; -+ case 2: imr = 0x2; break; -+ default: break; -+ } -+ -+ return (getiprh() & imr); -+} -+ -+unsigned long coldfire_gettimeoffset(void) -+{ -+ volatile unsigned long trr, tcn, offset; -+ -+ tcn = __raw_readw(MCF_DTIM0_DTCN); -+ trr = __raw_readl(MCF_DTIM0_DTRR); -+ offset = (tcn * (1000000 / HZ)) / trr; -+ -+ /* Check if we just wrapped the counters and maybe missed a tick */ -+ if ((offset < (1000000 / HZ / 2)) && timerirqpending(1)) -+ offset += 1000000 / HZ; -+ return offset; -+} -+ -+#elif defined(CONFIG_M547X_8X) -+ -+void coldfire_tick(void) -+{ -+ /* Reset the ColdFire timer */ -+ MCF_SSR(0) = MCF_SSR_ST; -+} -+ -+void __init coldfire_sched_init(irq_handler_t handler) -+{ -+ int irq = ISC_SLTn(0); -+ -+ MCF_SCR(0) = 0; -+ MCF_ICR(irq) = ILP_SLT0; -+ request_irq(64 + irq, handler, IRQF_DISABLED, "ColdFire Timer 0", NULL); -+ MCF_SLTCNT(0) = MCF_BUSCLK / HZ; -+ MCF_SCR(0) |= MCF_SCR_TEN | MCF_SCR_IEN | MCF_SCR_RUN; -+} -+ -+unsigned long coldfire_gettimeoffset(void) -+{ -+ volatile unsigned long trr, tcn, offset; -+ trr = MCF_SLTCNT(0); -+ tcn = MCF_SCNT(0); -+ -+ offset = (trr - tcn) * ((1000000 >> 3) / HZ) / (trr >> 3); -+ if (MCF_SSR(0) & MCF_SSR_ST) -+ offset += 1000000 / HZ; -+ -+ return offset; -+} -+ -+#endif -+ -+void coldfire_reboot(void) -+{ -+#if defined(CONFIG_M5445X) -+ /* disable interrupts and do a software reset */ -+ asm("movew #0x2700, %%sr\n\t" -+ "moveb #0x80, %%d0\n\t" -+ "moveb %%d0, 0xfc0a0000\n\t" -+ : : : "%d0"); -+#elif defined(CONFIG_M547X_8X) -+ /* disable interrupts and enable the watchdog */ -+ printk(KERN_INFO "Rebooting\n"); -+ asm("movew #0x2700, %sr\n"); -+ MCF_GPT_GMS0 = MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4); -+#endif -+} -+ -+static void coldfire_get_model(char *model) -+{ -+ sprintf(model, "Version 4 ColdFire"); -+} -+ -+static void __init -+coldfire_bootmem_alloc(unsigned long memory_start, unsigned long memory_end) -+{ -+ unsigned long base_pfn; -+ -+ /* compute total pages in system */ -+ num_pages = PAGE_ALIGN(memory_end - PAGE_OFFSET) >> PAGE_SHIFT; -+ -+ /* align start/end to page boundries */ -+ memory_start = PAGE_ALIGN(memory_start); -+ memory_end = memory_end & PAGE_MASK; -+ -+ /* page numbers */ -+ base_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT; -+ min_low_pfn = __pa(memory_start) >> PAGE_SHIFT; -+ max_low_pfn = __pa(memory_end) >> PAGE_SHIFT; -+ -+ high_memory = (void *)memory_end; -+ availmem = memory_start; -+ -+ /* setup bootmem data */ -+ m68k_setup_node(0); -+ availmem += init_bootmem_node(NODE_DATA(0), min_low_pfn, -+ base_pfn, max_low_pfn); -+ availmem = PAGE_ALIGN(availmem); -+ free_bootmem(__pa(availmem), memory_end - (availmem)); -+} -+ -+void __init config_coldfire(void) -+{ -+ unsigned long endmem, startmem; -+ int i; -+ -+ /* -+ * Calculate endmem from m68k_memory, assume all are contiguous -+ */ -+ startmem = ((((int) &_end) + (PAGE_SIZE - 1)) & PAGE_MASK); -+ endmem = PAGE_OFFSET; -+ for (i = 0; i < m68k_num_memory; ++i) -+ endmem += m68k_memory[i].size; -+ -+ printk(KERN_INFO "starting up linux startmem 0x%lx, endmem 0x%lx, \ -+ size %luMB\n", startmem, endmem, (endmem - startmem) >> 20); -+ -+ memset(irq_enable, 0, sizeof(irq_enable)); -+ -+ /* -+ * Setup coldfire mach-specific handlers -+ */ -+ mach_max_dma_address = 0xffffffff; -+ mach_sched_init = coldfire_sched_init; -+ mach_tick = coldfire_tick; -+ mach_gettimeoffset = coldfire_gettimeoffset; -+ mach_reset = coldfire_reboot; -+/* mach_hwclk = coldfire_hwclk; to be done */ -+ mach_get_model = coldfire_get_model; -+ -+ coldfire_bootmem_alloc(startmem, endmem-1); -+ -+ /* -+ * initrd setup -+ */ -+/* #ifdef CONFIG_BLK_DEV_INITRD -+ if (m68k_ramdisk.size) { -+ reserve_bootmem (__pa(m68k_ramdisk.addr), m68k_ramdisk.size); -+ initrd_start = (unsigned long) m68k_ramdisk.addr; -+ initrd_end = initrd_start + m68k_ramdisk.size; -+ printk (KERN_DEBUG "initrd: %08lx - %08lx\n", initrd_start, -+ initrd_end); -+ } -+#endif */ -+ -+#if defined(CONFIG_DUMMY_CONSOLE) || defined(CONFIG_FRAMEBUFFER_CONSOLE) -+ conswitchp = &dummy_con; -+#endif -+ -+#if defined(CONFIG_SERIAL_COLDFIRE) -+ /* -+ * This causes trouble when it is re-registered later. -+ * Currently this is fixed by conditionally commenting -+ * out the register_console in mcf_serial.c -+ */ -+ register_console(&mcfrs_console); -+#endif -+} ---- /dev/null -+++ b/arch/m68k/coldfire/entry.S -@@ -0,0 +1,711 @@ -+/* -+ * arch/m68k/coldfire/entry.S -+ * -+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) -+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, -+ * Kenneth Albanowski <kjahds@kjahds.com>, -+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com) -+ * Copyright (C) 2004-2006 Macq Electronique SA. (www.macqel.com) -+ * Matt Waddel Matt.Waddel@freescale.com -+ * Kurt Mahan kmahan@freescale.com -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * Modify irq status in buserr -- (c) Copyright 2008, SYSTEM electronic Gmbh -+ * -+ * Based on: -+ * -+ * arch/m68knommu/platform/5307/entry.S & -+ * arch/m68k/kernel/entry.S -+ * -+ * Copyright (C) 1991, 1992 Linus Torvalds -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file README.legal in the main directory of this archive -+ * for more details. -+ * -+ * Linux/m68k support by Hamish Macdonald -+ * -+ * ColdFire support by Greg Ungerer (gerg@snapgear.com) -+ * 5307 fixes by David W. Miller -+ * linux 2.4 support David McCullough <davidm@snapgear.com> -+ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be> -+ * Ported to mmu Coldfire by Matt Waddel -+ */ -+ -+#include <linux/sys.h> -+#include <linux/linkage.h> -+#include <asm/cf_entry.h> -+#include <asm/errno.h> -+#include <asm/setup.h> -+#include <asm/segment.h> -+#include <asm/traps.h> -+#include <asm/unistd.h> -+ -+/* -+ * TASK_INFO: -+ * -+ * - TINFO_PREEMPT (struct thread_info / preempt_count) -+ * Used to keep track of preemptability -+ * - TINFO_FLAGS (struct thread_info / flags - include/asm-m68k/thread_info.h) -+ * Various bit flags that are checked for scheduling/tracing -+ * Bits 0-7 are checked every exception exit -+ * 8-15 are checked every syscall exit -+ * -+ * TIF_SIGPENDING 6 -+ * TIF_NEED_RESCHED 7 -+ * TIF_DELAYED_TRACE 14 -+ * TIF_SYSCALL_TRACE 15 -+ * TIF_MEMDIE 16 (never checked here) -+ */ -+ -+.bss -+ -+sw_ksp: -+.long 0 -+ -+sw_usp: -+.long 0 -+ -+.text -+ -+.globl system_call -+.globl buserr -+.globl trap -+.globl resume -+.globl ret_from_exception -+.globl ret_from_signal -+.globl sys_call_table -+.globl ret_from_interrupt -+.globl inthandler -+ -+ENTRY(buserr) -+#ifdef CONFIG_COLDFIRE_FOO -+ movew #0x2700,%sr /* lock interrupts */ -+#endif -+ SAVE_ALL_INT -+#ifdef CONFIG_COLDFIRE_FOO -+ movew PT_SR(%sp),%d3 /* get original %sr */ -+ oril #0x2000,%d3 /* set supervisor mode in it */ -+ movew %d3,%sr /* recover irq state */ -+#endif -+ GET_CURRENT(%d0) -+ movel %sp,%sp@- /* stack frame pointer argument */ -+ jsr buserr_c -+ addql #4,%sp -+ jra .Lret_from_exception -+ -+ENTRY(trap) -+ SAVE_ALL_INT -+ GET_CURRENT(%d0) -+ movel %sp,%sp@- /* stack frame pointer argument */ -+ jsr trap_c -+ addql #4,%sp -+ jra .Lret_from_exception -+ -+ /* After a fork we jump here directly from resume, -+ %d1 contains the previous task schedule_tail */ -+ENTRY(ret_from_fork) -+ movel %d1,%sp@- -+ jsr schedule_tail -+ addql #4,%sp -+ jra .Lret_from_exception -+ -+do_trace_entry: -+ movel #-ENOSYS,%d1 /* needed for strace */ -+ movel %d1,%sp@(PT_D0) -+ subql #4,%sp -+ SAVE_SWITCH_STACK -+ jbsr syscall_trace -+ RESTORE_SWITCH_STACK -+ addql #4,%sp -+ movel %sp@(PT_ORIG_D0),%d0 -+ cmpl #NR_syscalls,%d0 -+ jcs syscall -+badsys: -+ movel #-ENOSYS,%d1 -+ movel %d1,%sp@(PT_D0) -+ jra ret_from_exception -+ -+do_trace_exit: -+ subql #4,%sp -+ SAVE_SWITCH_STACK -+ jbsr syscall_trace -+ RESTORE_SWITCH_STACK -+ addql #4,%sp -+ jra .Lret_from_exception -+ -+ENTRY(ret_from_signal) -+ RESTORE_SWITCH_STACK -+ addql #4,%sp -+ jra .Lret_from_exception -+ -+ENTRY(system_call) -+ SAVE_ALL_SYS -+ -+ GET_CURRENT(%d1) -+ /* save top of frame */ -+ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) -+ -+ /* syscall trace */ -+ tstb %curptr@(TASK_INFO+TINFO_FLAGS+2) -+ jmi do_trace_entry /* SYSCALL_TRACE is set */ -+ cmpl #NR_syscalls,%d0 -+ jcc badsys -+syscall: -+ movel #sys_call_table,%a0 -+ asll #2,%d0 -+ addl %d0,%a0 -+ movel %a0@,%a0 -+ jsr %a0@ -+ movel %d0,%sp@(PT_D0) /* save the return value */ -+ret_from_syscall: -+ movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0 -+ jne syscall_exit_work /* flags set so process */ -+1: RESTORE_ALL -+ -+syscall_exit_work: -+ btst #5,%sp@(PT_SR) /* check if returning to kernel */ -+ bnes 1b /* if so, skip resched, signals */ -+ -+ btstl #15,%d0 /* check if SYSCALL_TRACE */ -+ jne do_trace_exit -+ btstl #14,%d0 /* check if DELAYED_TRACE */ -+ jne do_delayed_trace -+ btstl #6,%d0 /* check if SIGPENDING */ -+ jne do_signal_return -+ pea resume_userspace -+ jra schedule -+ -+ENTRY(ret_from_exception) -+.Lret_from_exception: -+ btst #5,%sp@(PT_SR) /* check if returning to kernel */ -+ bnes 1f /* if so, skip resched, signals */ -+ movel %d0,%sp@- /* Only allow interrupts when we are */ -+ move %sr,%d0 /* last one on the kernel stack, */ -+ andl #ALLOWINT,%d0 /* otherwise stack overflow can occur */ -+ move %d0,%sr /* during heavy interrupt load. */ -+ movel %sp@+,%d0 -+ -+resume_userspace: -+ moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0 -+ jne exit_work /* SIGPENDING and/or NEED_RESCHED set */ -+1: RESTORE_ALL -+ -+exit_work: -+ /* save top of frame */ -+ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) -+ btstl #6,%d0 /* check for SIGPENDING in flags */ -+ jne do_signal_return -+ pea resume_userspace -+ jra schedule -+ -+do_signal_return: -+ subql #4,%sp /* dummy return address */ -+ SAVE_SWITCH_STACK -+ pea %sp@(SWITCH_STACK_SIZE) -+ clrl %sp@- -+ bsrl do_signal -+ addql #8,%sp -+ RESTORE_SWITCH_STACK -+ addql #4,%sp -+ jbra resume_userspace -+ -+do_delayed_trace: -+ bclr #7,%sp@(PT_SR) /* clear trace bit in SR */ -+ pea 1 /* send SIGTRAP */ -+ movel %curptr,%sp@- -+ pea LSIGTRAP -+ jbsr send_sig -+ addql #8,%sp -+ addql #4,%sp -+ jbra resume_userspace -+ -+/* -+ * This is the interrupt handler (for all hardware interrupt -+ * sources). It figures out the vector number and calls the appropriate -+ * interrupt service routine directly. -+ */ -+ENTRY(inthandler) -+ SAVE_ALL_INT -+ GET_CURRENT(%d0) -+ addql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) -+ /* put exception # in d0 */ -+ movel %sp@(PT_VECTOR),%d0 -+ swap %d0 /* extract bits 25:18 */ -+ lsrl #2,%d0 -+ andl #0x0ff,%d0 -+ -+ movel %sp,%sp@- -+ movel %d0,%sp@- /* put vector # on stack */ -+auto_irqhandler_fixup = . + 2 -+ jbsr process_int /* process the IRQ */ -+ addql #8,%sp /* pop parameters off stack */ -+ -+ENTRY(ret_from_interrupt) -+ret_from_interrupt: -+ -+ subql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) -+ jeq ret_from_last_interrupt -+2: RESTORE_ALL -+ -+ ALIGN -+ret_from_last_interrupt: -+ moveb %sp@(PT_SR),%d0 -+ andl #(~ALLOWINT>>8)&0xff,%d0 -+ jne 2b -+ -+ /* check if we need to do software interrupts */ -+ tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING -+ jeq .Lret_from_exception -+ pea ret_from_exception -+ jra do_softirq -+ -+ENTRY(user_inthandler) -+ SAVE_ALL_INT -+ GET_CURRENT(%d0) -+ addql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) -+ /* put exception # in d0 */ -+ movel %sp@(PT_VECTOR),%d0 -+user_irqvec_fixup = . + 2 -+ swap %d0 /* extract bits 25:18 */ -+ lsrl #2,%d0 -+ andl #0x0ff,%d0 -+ -+ movel %sp,%sp@- -+ movel %d0,%sp@- /* put vector # on stack */ -+user_irqhandler_fixup = . + 2 -+ jbsr process_int /* process the IRQ */ -+ addql #8,%sp /* pop parameters off stack */ -+ -+ subql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) -+ jeq ret_from_last_interrupt -+ RESTORE_ALL -+ -+/* Handler for uninitialized and spurious interrupts */ -+ -+ENTRY(bad_inthandler) -+ SAVE_ALL_INT -+ GET_CURRENT(%d0) -+ addql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) -+ -+ movel %sp,%sp@- -+ jsr handle_badint -+ addql #4,%sp -+ -+ subql #1,%curptr@(TASK_INFO+TINFO_PREEMPT) -+ jeq ret_from_last_interrupt -+ RESTORE_ALL -+ -+ENTRY(sys_fork) -+ SAVE_SWITCH_STACK -+ pea %sp@(SWITCH_STACK_SIZE) -+ jbsr m68k_fork -+ addql #4,%sp -+ RESTORE_SWITCH_STACK -+ rts -+ -+ENTRY(sys_clone) -+ SAVE_SWITCH_STACK -+ pea %sp@(SWITCH_STACK_SIZE) -+ jbsr m68k_clone -+ addql #4,%sp -+ RESTORE_SWITCH_STACK -+ rts -+ -+ENTRY(sys_vfork) -+ SAVE_SWITCH_STACK -+ pea %sp@(SWITCH_STACK_SIZE) -+ jbsr m68k_vfork -+ addql #4,%sp -+ RESTORE_SWITCH_STACK -+ rts -+ -+ENTRY(sys_sigsuspend) -+ SAVE_SWITCH_STACK -+ pea %sp@(SWITCH_STACK_SIZE) -+ jbsr do_sigsuspend -+ addql #4,%sp -+ RESTORE_SWITCH_STACK -+ rts -+ -+ENTRY(sys_rt_sigsuspend) -+ SAVE_SWITCH_STACK -+ pea %sp@(SWITCH_STACK_SIZE) -+ jbsr do_rt_sigsuspend -+ addql #4,%sp -+ RESTORE_SWITCH_STACK -+ rts -+ -+ENTRY(sys_sigreturn) -+ SAVE_SWITCH_STACK -+ jbsr do_sigreturn -+ RESTORE_SWITCH_STACK -+ rts -+ -+ENTRY(sys_rt_sigreturn) -+ SAVE_SWITCH_STACK -+ jbsr do_rt_sigreturn -+ RESTORE_SWITCH_STACK -+ rts -+ -+resume: -+ /* -+ * Beware - when entering resume, prev (the current task) is -+ * in a0, next (the new task) is in a1,so don't change these -+ * registers until their contents are no longer needed. -+ */ -+ -+ /* save sr */ -+ movew %sr,%d0 -+ movew %d0,%a0@(TASK_THREAD+THREAD_SR) -+ -+ /* save usp */ -+ /* Save USP via %a1 (which is saved/restored from %d0) */ -+ movel %a1,%d0 -+ movel %usp,%a1 -+ movel %a1,%a0@(TASK_THREAD+THREAD_USP) -+ movel %d0,%a1 -+ -+ /* save non-scratch registers on stack */ -+ SAVE_SWITCH_STACK -+ -+ /* save current kernel stack pointer */ -+ movel %sp,%a0@(TASK_THREAD+THREAD_KSP) -+ -+ /* Return previous task in %d1 */ -+ movel %curptr,%d1 -+ -+ /* switch to new task (a1 contains new task) */ -+ movel %a1,%curptr -+ -+ /* restore the kernel stack pointer */ -+ movel %a1@(TASK_THREAD+THREAD_KSP),%sp -+ -+ /* restore non-scratch registers */ -+ RESTORE_SWITCH_STACK -+ -+ /* restore user stack pointer */ -+ movel %a1@(TASK_THREAD+THREAD_USP),%a0 -+ movel %a0,%usp -+ -+ /* restore status register */ -+ movew %a1@(TASK_THREAD+THREAD_SR),%d0 -+ movew %d0,%sr -+ -+ rts -+ -+.data -+ALIGN -+sys_call_table: -+ .long sys_ni_syscall /* 0 - old "setup()" system call*/ -+ .long sys_exit -+ .long sys_fork -+ .long sys_read -+ .long sys_write -+ .long sys_open /* 5 */ -+ .long sys_close -+ .long sys_waitpid -+ .long sys_creat -+ .long sys_link -+ .long sys_unlink /* 10 */ -+ .long sys_execve -+ .long sys_chdir -+ .long sys_time -+ .long sys_mknod -+ .long sys_chmod /* 15 */ -+ .long sys_chown16 -+ .long sys_ni_syscall /* old break syscall holder */ -+ .long sys_stat -+ .long sys_lseek -+ .long sys_getpid /* 20 */ -+ .long sys_mount -+ .long sys_oldumount -+ .long sys_setuid16 -+ .long sys_getuid16 -+ .long sys_stime /* 25 */ -+ .long sys_ptrace -+ .long sys_alarm -+ .long sys_fstat -+ .long sys_pause -+ .long sys_utime /* 30 */ -+ .long sys_ni_syscall /* old stty syscall holder */ -+ .long sys_ni_syscall /* old gtty syscall holder */ -+ .long sys_access -+ .long sys_nice -+ .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ -+ .long sys_sync -+ .long sys_kill -+ .long sys_rename -+ .long sys_mkdir -+ .long sys_rmdir /* 40 */ -+ .long sys_dup -+ .long sys_pipe -+ .long sys_times -+ .long sys_ni_syscall /* old prof syscall holder */ -+ .long sys_brk /* 45 */ -+ .long sys_setgid16 -+ .long sys_getgid16 -+ .long sys_signal -+ .long sys_geteuid16 -+ .long sys_getegid16 /* 50 */ -+ .long sys_acct -+ .long sys_umount /* recycled never used phys() */ -+ .long sys_ni_syscall /* old lock syscall holder */ -+ .long sys_ioctl -+ .long sys_fcntl /* 55 */ -+ .long sys_ni_syscall /* old mpx syscall holder */ -+ .long sys_setpgid -+ .long sys_ni_syscall /* old ulimit syscall holder */ -+ .long sys_ni_syscall -+ .long sys_umask /* 60 */ -+ .long sys_chroot -+ .long sys_ustat -+ .long sys_dup2 -+ .long sys_getppid -+ .long sys_getpgrp /* 65 */ -+ .long sys_setsid -+ .long sys_sigaction -+ .long sys_sgetmask -+ .long sys_ssetmask -+ .long sys_setreuid16 /* 70 */ -+ .long sys_setregid16 -+ .long sys_sigsuspend -+ .long sys_sigpending -+ .long sys_sethostname -+ .long sys_setrlimit /* 75 */ -+ .long sys_old_getrlimit -+ .long sys_getrusage -+ .long sys_gettimeofday -+ .long sys_settimeofday -+ .long sys_getgroups16 /* 80 */ -+ .long sys_setgroups16 -+ .long old_select -+ .long sys_symlink -+ .long sys_lstat -+ .long sys_readlink /* 85 */ -+ .long sys_uselib -+ .long sys_swapon -+ .long sys_reboot -+ .long old_readdir -+ .long old_mmap /* 90 */ -+ .long sys_munmap -+ .long sys_truncate -+ .long sys_ftruncate -+ .long sys_fchmod -+ .long sys_fchown16 /* 95 */ -+ .long sys_getpriority -+ .long sys_setpriority -+ .long sys_ni_syscall /* old profil syscall holder */ -+ .long sys_statfs -+ .long sys_fstatfs /* 100 */ -+ .long sys_ni_syscall /* ioperm for i386 */ -+ .long sys_socketcall -+ .long sys_syslog -+ .long sys_setitimer -+ .long sys_getitimer /* 105 */ -+ .long sys_newstat -+ .long sys_newlstat -+ .long sys_newfstat -+ .long sys_ni_syscall -+ .long sys_ni_syscall /* 110 */ /* iopl for i386 */ -+ .long sys_vhangup -+ .long sys_ni_syscall /* obsolete idle() syscall */ -+ .long sys_ni_syscall /* vm86old for i386 */ -+ .long sys_wait4 -+ .long sys_swapoff /* 115 */ -+ .long sys_sysinfo -+ .long sys_ipc -+ .long sys_fsync -+ .long sys_sigreturn -+ .long sys_clone /* 120 */ -+ .long sys_setdomainname -+ .long sys_newuname -+ .long sys_cacheflush /* modify_ldt for i386 */ -+ .long sys_adjtimex -+ .long sys_mprotect /* 125 */ -+ .long sys_sigprocmask -+ .long sys_ni_syscall /* old "create_module" */ -+ .long sys_init_module -+ .long sys_delete_module -+ .long sys_ni_syscall /* 130 - old "get_kernel_syms" */ -+ .long sys_quotactl -+ .long sys_getpgid -+ .long sys_fchdir -+ .long sys_bdflush -+ .long sys_sysfs /* 135 */ -+ .long sys_personality -+ .long sys_ni_syscall /* for afs_syscall */ -+ .long sys_setfsuid16 -+ .long sys_setfsgid16 -+ .long sys_llseek /* 140 */ -+ .long sys_getdents -+ .long sys_select -+ .long sys_flock -+ .long sys_msync -+ .long sys_readv /* 145 */ -+ .long sys_writev -+ .long sys_getsid -+ .long sys_fdatasync -+ .long sys_sysctl -+ .long sys_mlock /* 150 */ -+ .long sys_munlock -+ .long sys_mlockall -+ .long sys_munlockall -+ .long sys_sched_setparam -+ .long sys_sched_getparam /* 155 */ -+ .long sys_sched_setscheduler -+ .long sys_sched_getscheduler -+ .long sys_sched_yield -+ .long sys_sched_get_priority_max -+ .long sys_sched_get_priority_min /* 160 */ -+ .long sys_sched_rr_get_interval -+ .long sys_nanosleep -+ .long sys_mremap -+ .long sys_setresuid16 -+ .long sys_getresuid16 /* 165 */ -+ .long sys_getpagesize -+ .long sys_ni_syscall /* old sys_query_module */ -+ .long sys_poll -+ .long sys_nfsservctl -+ .long sys_setresgid16 /* 170 */ -+ .long sys_getresgid16 -+ .long sys_prctl -+ .long sys_rt_sigreturn -+ .long sys_rt_sigaction -+ .long sys_rt_sigprocmask /* 175 */ -+ .long sys_rt_sigpending -+ .long sys_rt_sigtimedwait -+ .long sys_rt_sigqueueinfo -+ .long sys_rt_sigsuspend -+ .long sys_pread64 /* 180 */ -+ .long sys_pwrite64 -+ .long sys_lchown16; -+ .long sys_getcwd -+ .long sys_capget -+ .long sys_capset /* 185 */ -+ .long sys_sigaltstack -+ .long sys_sendfile -+ .long sys_ni_syscall /* streams1 */ -+ .long sys_ni_syscall /* streams2 */ -+ .long sys_vfork /* 190 */ -+ .long sys_getrlimit -+ .long sys_mmap2 -+ .long sys_truncate64 -+ .long sys_ftruncate64 -+ .long sys_stat64 /* 195 */ -+ .long sys_lstat64 -+ .long sys_fstat64 -+ .long sys_chown -+ .long sys_getuid -+ .long sys_getgid /* 200 */ -+ .long sys_geteuid -+ .long sys_getegid -+ .long sys_setreuid -+ .long sys_setregid -+ .long sys_getgroups /* 205 */ -+ .long sys_setgroups -+ .long sys_fchown -+ .long sys_setresuid -+ .long sys_getresuid -+ .long sys_setresgid /* 210 */ -+ .long sys_getresgid -+ .long sys_lchown -+ .long sys_setuid -+ .long sys_setgid -+ .long sys_setfsuid /* 215 */ -+ .long sys_setfsgid -+ .long sys_pivot_root -+ .long sys_ni_syscall -+ .long sys_ni_syscall -+ .long sys_getdents64 /* 220 */ -+ .long sys_gettid -+ .long sys_tkill -+ .long sys_setxattr -+ .long sys_lsetxattr -+ .long sys_fsetxattr /* 225 */ -+ .long sys_getxattr -+ .long sys_lgetxattr -+ .long sys_fgetxattr -+ .long sys_listxattr -+ .long sys_llistxattr /* 230 */ -+ .long sys_flistxattr -+ .long sys_removexattr -+ .long sys_lremovexattr -+ .long sys_fremovexattr -+ .long sys_futex /* 235 */ -+ .long sys_sendfile64 -+ .long sys_mincore -+ .long sys_madvise -+ .long sys_fcntl64 -+ .long sys_readahead /* 240 */ -+ .long sys_io_setup -+ .long sys_io_destroy -+ .long sys_io_getevents -+ .long sys_io_submit -+ .long sys_io_cancel /* 245 */ -+ .long sys_fadvise64 -+ .long sys_exit_group -+ .long sys_lookup_dcookie -+ .long sys_epoll_create -+ .long sys_epoll_ctl /* 250 */ -+ .long sys_epoll_wait -+ .long sys_remap_file_pages -+ .long sys_set_tid_address -+ .long sys_timer_create -+ .long sys_timer_settime /* 255 */ -+ .long sys_timer_gettime -+ .long sys_timer_getoverrun -+ .long sys_timer_delete -+ .long sys_clock_settime -+ .long sys_clock_gettime /* 260 */ -+ .long sys_clock_getres -+ .long sys_clock_nanosleep -+ .long sys_statfs64 -+ .long sys_fstatfs64 -+ .long sys_tgkill /* 265 */ -+ .long sys_utimes -+ .long sys_fadvise64_64 -+ .long sys_mbind -+ .long sys_get_mempolicy -+ .long sys_set_mempolicy /* 270 */ -+ .long sys_mq_open -+ .long sys_mq_unlink -+ .long sys_mq_timedsend -+ .long sys_mq_timedreceive -+ .long sys_mq_notify /* 275 */ -+ .long sys_mq_getsetattr -+ .long sys_waitid -+ .long sys_ni_syscall /* for sys_vserver */ -+ .long sys_add_key -+ .long sys_request_key /* 280 */ -+ .long sys_keyctl -+ .long sys_ioprio_set -+ .long sys_ioprio_get -+ .long sys_inotify_init -+ .long sys_inotify_add_watch /* 285 */ -+ .long sys_inotify_rm_watch -+ .long sys_migrate_pages -+ .long sys_openat -+ .long sys_mkdirat -+ .long sys_mknodat /* 290 */ -+ .long sys_fchownat -+ .long sys_futimesat -+ .long sys_fstatat64 -+ .long sys_unlinkat -+ .long sys_renameat /* 295 */ -+ .long sys_linkat -+ .long sys_symlinkat -+ .long sys_readlinkat -+ .long sys_fchmodat -+ .long sys_faccessat /* 300 */ -+ .long sys_ni_syscall /* Reserved for pselect6 */ -+ .long sys_ni_syscall /* Reserved for ppoll */ -+ .long sys_unshare -+ .long sys_set_robust_list -+ .long sys_get_robust_list /* 305 */ -+ .long sys_splice -+ .long sys_sync_file_range -+ .long sys_tee -+ .long sys_vmsplice -+ .long sys_move_pages /* 310 */ -+ ---- /dev/null -+++ b/arch/m68k/coldfire/head.S -@@ -0,0 +1,661 @@ -+/* -+ * head.S is the MMU enabled ColdFire specific initial boot code -+ * -+ * Ported to ColdFire by -+ * Matt Waddel Matt.Waddel@freescale.com -+ * Kurt Mahan kmahan@freescale.com -+ * Copyright Freescale Semiconductor, Inc. 2007, 2008 -+ * Phys kernel mapping Copyright Daniel Krueger, SYSTEC electornic GmbH 2008 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * Parts of this code came from arch/m68k/kernel/head.S -+ */ -+#include <linux/linkage.h> -+#include <linux/init.h> -+#include <asm/bootinfo.h> -+#include <asm/setup.h> -+#include <asm/entry.h> -+#include <asm/pgtable.h> -+#include <asm/page.h> -+#include <asm/coldfire.h> -+#include <asm/mcfuart.h> -+#include <asm/cfcache.h> -+ -+#define DEBUG -+ -+.globl kernel_pg_dir -+.globl availmem -+.globl set_context -+.globl set_fpga -+ -+#ifdef DEBUG -+/* When debugging use readable names for labels */ -+#ifdef __STDC__ -+#define L(name) .head.S.##name -+#else -+#define L(name) .head.S./**/name -+#endif -+#else -+#ifdef __STDC__ -+#define L(name) .L##name -+#else -+#define L(name) .L/**/name -+#endif -+#endif -+ -+/* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */ -+#ifndef __INITDATA -+#define __INITDATA .data -+#define __FINIT .previous -+#endif -+ -+#if CONFIG_SDRAM_BASE != PAGE_OFFSET -+/* -+ * Kernel mapped to virtual ram address. -+ * -+ * M5445x: -+ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs -+ * Data[1]: 0xA0000000 -> 0xAFFFFFFF PCI -+ * Code[0]: Not Mapped -+ * Code[1]: Not Mapped -+ * -+ * M547x/M548x -+ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs -+ * Data[1]: Not Mapped -+ * Code[0]: Not Mapped -+ * Code[1]: Not Mapped -+ */ -+#if defined(CONFIG_M5445X) -+#define ACR0_DEFAULT #0xF00FA048 /* System regs */ -+#define ACR1_DEFAULT #0xA00FA048 /* PCI */ -+#define ACR2_DEFAULT #0x00000000 /* Not Mapped */ -+#define ACR3_DEFAULT #0x00000000 /* Not Mapped */ -+#elif defined(CONFIG_M547X_8X) -+#define ACR0_DEFAULT #0xF00FA048 /* System Regs */ -+#define ACR1_DEFAULT #0x00000000 /* Not Mapped */ -+#define ACR2_DEFAULT #0x00000000 /* Not Mapped */ -+#define ACR3_DEFAULT #0x00000000 /* Not Mapped */ -+#endif -+ -+#else /* CONFIG_SDRAM_BASE = PAGE_OFFSET */ -+/* -+ * Kernel mapped to physical ram address. -+ * -+ * M5445x: -+ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs -+ * Data[1]: 0x40000000 -> 0x4FFFFFFF SDRAM - uncached -+ * Code[0]: Not Mapped -+ * Code[1]: 0x40000000 -> 0x4FFFFFFF SDRAM - cached -+ * -+ * M547x/M548x -+ * Data[0]: 0xF0000000 -> 0xFFFFFFFF System regs -+ * Data[1]: 0x00000000 -> 0x0FFFFFFF SDRAM - uncached -+ * Code[0]: Not Mapped -+ * Code[1]: 0x00000000 -> 0x0FFFFFFF SDRAM - cached -+ */ -+#if defined(CONFIG_M5445X) -+#define ACR0_DEFAULT #0xF00FA048 /* System Regs */ -+#define ACR1_DEFAULT #0x400FA048 /* SDRAM uncached */ -+#define ACR2_DEFAULT #0x00000000 /* Not mapped */ -+#define ACR3_DEFAULT #0x400FA008 /* SDRAM cached */ -+#elif defined(CONFIG_M547X_8X) -+#define ACR0_DEFAULT #0xF00FA048 /* System Regs */ -+#define ACR1_DEFAULT #0x000FA048 /* SDRAM uncached */ -+#define ACR2_DEFAULT #0x00000000 /* Not mapped */ -+#define ACR3_DEFAULT #0x000FA008 /* SDRAM cached */ -+#endif -+#endif -+ -+/* Several macros to make the writing of subroutines easier: -+ * - func_start marks the beginning of the routine which setups the frame -+ * register and saves the registers, it also defines another macro -+ * to automatically restore the registers again. -+ * - func_return marks the end of the routine and simply calls the prepared -+ * macro to restore registers and jump back to the caller. -+ * - func_define generates another macro to automatically put arguments -+ * onto the stack call the subroutine and cleanup the stack again. -+ */ -+ -+.macro load_symbol_address symbol,register -+ movel #\symbol,\register -+.endm -+ -+.macro func_start name,saveregs,savesize,stack=0 -+L(\name): -+ linkw %a6,#-\stack -+ subal #(\savesize),%sp -+ moveml \saveregs,%sp@ -+.set stackstart,-\stack -+ -+.macro func_return_\name -+ moveml %sp@,\saveregs -+ addal #(\savesize),%sp -+ unlk %a6 -+ rts -+.endm -+.endm -+ -+.macro func_return name -+ func_return_\name -+.endm -+ -+.macro func_call name -+ jbsr L(\name) -+.endm -+ -+.macro move_stack nr,arg1,arg2,arg3,arg4 -+.if \nr -+ move_stack "(\nr-1)",\arg2,\arg3,\arg4 -+ movel \arg1,%sp@- -+.endif -+.endm -+ -+.macro func_define name,nr=0 -+.macro \name arg1,arg2,arg3,arg4 -+ move_stack \nr,\arg1,\arg2,\arg3,\arg4 -+ func_call \name -+.if \nr -+ lea %sp@(\nr*4),%sp -+.endif -+.endm -+.endm -+ -+func_define serial_putc,1 -+ -+.macro putc ch -+ pea \ch -+ func_call serial_putc -+ addql #4,%sp -+.endm -+ -+.macro dputc ch -+#ifdef DEBUG -+ putc \ch -+#endif -+.endm -+ -+func_define putn,1 -+ -+.macro dputn nr -+#ifdef DEBUG -+ putn \nr -+#endif -+.endm -+ -+#if CONFIG_SDRAM_BASE != PAGE_OFFSET -+/* -+ mmu_map - creates a new TLB entry -+ -+ virt_addr Must be on proper boundary -+ phys_addr Must be on proper boundary -+ itlb MMUOR_ITLB if instruction TLB or 0 -+ asid address space ID -+ shared_global MMUTR_SG if shared between different ASIDs or 0 -+ size_code MMUDR_SZ1M 1 MB -+ MMUDR_SZ4K 4 KB -+ MMUDR_SZ8K 8 KB -+ MMUDR_SZ16M 16 MB -+ cache_mode MMUDR_INC instruction non-cacheable -+ MMUDR_IC instruction cacheable -+ MMUDR_DWT data writethrough -+ MMUDR_DCB data copyback -+ MMUDR_DNCP data non-cacheable, precise -+ MMUDR_DNCIP data non-cacheable, imprecise -+ super_prot MMUDR_SP if user mode generates exception or 0 -+ readable MMUDR_R if permits read access (data TLB) or 0 -+ writable MMUDR_W if permits write access (data TLB) or 0 -+ executable MMUDR_X if permits execute access (instruction TLB) or 0 -+ locked MMUDR_LK prevents TLB entry from being replaced or 0 -+ temp_data_reg a data register to use for temporary values -+*/ -+.macro mmu_map virt_addr,phys_addr,itlb,asid,shared_global,size_code,cache_mode,super_prot,readable,writable,executable,locked,temp_data_reg -+ /* Set up search of TLB. */ -+ movel #(\virt_addr+1), \temp_data_reg -+ movel \temp_data_reg, MMUAR -+ /* Search. */ -+ movel #(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg -+ movew \temp_data_reg, (MMUOR) -+ /* Set up tag value. */ -+ movel #(\virt_addr + \asid + \shared_global + MMUTR_V), \temp_data_reg -+ movel \temp_data_reg, MMUTR -+ /* Set up data value. */ -+ movel #(\phys_addr + \size_code + \cache_mode + \super_prot + \readable + \writable + \executable + \locked), \temp_data_reg -+ movel \temp_data_reg, MMUDR -+ /* Save it. */ -+ movel #(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg -+ movew \temp_data_reg, (MMUOR) -+.endm /* mmu_map */ -+ -+.macro mmu_unmap virt_addr,itlb,temp_data_reg -+ /* Set up search of TLB. */ -+ movel #(\virt_addr+1), \temp_data_reg -+ movel \temp_data_reg, MMUAR -+ /* Search. */ -+ movel #(MMUOR_STLB + MMUOR_ADR +\itlb), \temp_data_reg -+ movew \temp_data_reg, (MMUOR) -+ /* Test for hit. */ -+ movel MMUSR,\temp_data_reg -+ btst #MMUSR_HITN,\temp_data_reg -+ beq 1f -+ /* Read the TLB. */ -+ movel #(MMUOR_RW + MMUOR_ACC +\itlb), \temp_data_reg -+ movew \temp_data_reg, (MMUOR) -+ movel MMUSR,\temp_data_reg -+ /* Set up tag value. */ -+ movel #0, \temp_data_reg -+ movel \temp_data_reg, MMUTR -+ /* Set up data value. */ -+ movel #0, \temp_data_reg -+ movel \temp_data_reg, MMUDR -+ /* Save it. */ -+ movel #(MMUOR_ACC + MMUOR_UAA + \itlb), \temp_data_reg -+ movew \temp_data_reg, (MMUOR) -+1: -+.endm /* mmu_unmap */ -+#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */ -+ -+/* .text */ -+.section ".text.head","ax" -+ENTRY(_stext) -+/* Version numbers of the bootinfo interface -- if we later pass info -+ * from boot ROM we might want to put something real here. -+ * -+ * The area from _stext to _start will later be used as kernel pointer table -+ */ -+ bras 1f /* Jump over bootinfo version numbers */ -+ -+ .long BOOTINFOV_MAGIC -+ .long 0 -+#if CONFIG_SDRAM_BASE != PAGE_OFFSET -+1: jmp __start-(0xc0000000-CONFIG_SDRAM_BASE) -+#else -+1: jmp __start -+#endif -+ -+.equ kernel_pg_dir,_stext -+.equ .,_stext+0x1000 -+ -+ENTRY(_start) -+ jra __start -+__INIT -+ENTRY(__start) -+/* Save the location of u-boot info - cmd line, bd_info, etc. */ -+ movel %a7,%a4 /* Don't use %a4 before cf_early_init */ -+ addl #0x00000004,%a4 /* offset past top */ -+ addl #(PAGE_OFFSET-CONFIG_SDRAM_BASE),%a4 /* high mem offset */ -+ -+/* Setup initial stack pointer */ -+ movel #CONFIG_SDRAM_BASE+0x1000,%sp -+ -+/* Setup usp */ -+ subl %a0,%a0 -+ movel %a0,%usp -+ -+#if defined(CONFIG_M5445X) -+ movel #0x80000000, %d0 -+ movec %d0, %rambar1 -+#elif defined(CONFIG_M547X_8X) -+ movel #MCF_MBAR, %d0 -+ movec %d0, %mbar -+ move.l #(MCF_RAMBAR0 + 0x21), %d0 -+ movec %d0, %rambar0 -+ move.l #(MCF_RAMBAR1 + 0x21), %d0 -+ movec %d0, %rambar1 -+#endif -+ -+ movew #0x2700,%sr -+ -+/* reset cache */ -+ movel #(CF_CACR_ICINVA + CF_CACR_DCINVA),%d0 -+ movecl %d0,%cacr -+ -+ movel #(MMU_BASE+1),%d0 -+ movecl %d0,%mmubar -+ movel #MMUOR_CA,%a0 /* Clear tlb entries */ -+ movew %a0,(MMUOR) -+ movel #(MMUOR_CA + MMUOR_ITLB),%a0 /* Use ITLB for searches */ -+ movew %a0,(MMUOR) -+ movel #0,%a0 /* Clear Addr Space User ID */ -+ movecl %a0,%asid -+ -+/* setup ACRs */ -+ movel ACR0_DEFAULT, %d0 /* ACR0 (DATA) setup */ -+ movec %d0, %acr0 -+ nop -+ movel ACR1_DEFAULT, %d0 /* ACR1 (DATA) setup */ -+ movec %d0, %acr1 -+ nop -+ movel ACR2_DEFAULT, %d0 /* ACR2 (CODE) setup */ -+ movec %d0, %acr2 -+ nop -+ movel ACR3_DEFAULT, %d0 /* ACR3 (CODE) setup */ -+ movec %d0, %acr3 -+ nop -+ -+ /* If you change the memory size to another value make a matching -+ change in paging_init(cf-mmu.c) to zones_size[]. */ -+ -+#if CONFIG_SDRAM_BASE != PAGE_OFFSET -+#if defined(CONFIG_M5445X) -+ /* Map 256MB as code */ -+ mmu_map (PAGE_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+1*0x1000000), (PHYS_OFFSET+1*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+2*0x1000000), (PHYS_OFFSET+2*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+3*0x1000000), (PHYS_OFFSET+3*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+4*0x1000000), (PHYS_OFFSET+4*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+5*0x1000000), (PHYS_OFFSET+5*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+6*0x1000000), (PHYS_OFFSET+6*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+7*0x1000000), (PHYS_OFFSET+7*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+8*0x1000000), (PHYS_OFFSET+8*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+9*0x1000000), (PHYS_OFFSET+9*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+10*0x1000000), (PHYS_OFFSET+10*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+11*0x1000000), (PHYS_OFFSET+11*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+12*0x1000000), (PHYS_OFFSET+12*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+13*0x1000000), (PHYS_OFFSET+13*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+14*0x1000000), (PHYS_OFFSET+14*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+15*0x1000000), (PHYS_OFFSET+15*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \ -+ 0, 0, MMUDR_X, MMUDR_LK, %d0 -+ -+ /* Map 256MB as data also */ -+ mmu_map (PAGE_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+1*0x1000000), (PHYS_OFFSET+1*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+2*0x1000000), (PHYS_OFFSET+2*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+3*0x1000000), (PHYS_OFFSET+3*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+4*0x1000000), (PHYS_OFFSET+4*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+5*0x1000000), (PHYS_OFFSET+5*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+6*0x1000000), (PHYS_OFFSET+6*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+7*0x1000000), (PHYS_OFFSET+7*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+8*0x1000000), (PHYS_OFFSET+8*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+9*0x1000000), (PHYS_OFFSET+9*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+10*0x1000000), (PHYS_OFFSET+10*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+11*0x1000000), (PHYS_OFFSET+11*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+12*0x1000000), (PHYS_OFFSET+12*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+13*0x1000000), (PHYS_OFFSET+13*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+14*0x1000000), (PHYS_OFFSET+14*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+15*0x1000000), (PHYS_OFFSET+15*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ -+ /* Map ATA registers -- sacrifice a data TLB due to the hw design */ -+ mmu_map (0x90000000), (0x90000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, MMUDR_LK, %d0 -+ -+#elif defined(CONFIG_M547X_8X) -+ -+ /* Map first 8 MB as code */ -+ mmu_map (PAGE_OFFSET+0*1024*1024), (0*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ -+ MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+1*1024*1024), (1*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ -+ MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+2*1024*1024), (2*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ -+ MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+3*1024*1024), (3*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ -+ MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+4*1024*1024), (4*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ -+ MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+5*1024*1024), (5*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ -+ MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+6*1024*1024), (6*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ -+ MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+7*1024*1024), (7*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, MMUDR_X, \ -+ MMUDR_LK, %d0 -+ -+ /* Map first 8 MB as data */ -+ mmu_map (PAGE_OFFSET+0*1024*1024), (0*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+1*1024*1024), (1*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+2*1024*1024), (2*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+3*1024*1024), (3*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+4*1024*1024), (4*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+5*1024*1024), (5*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+6*1024*1024), (6*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, MMUDR_LK, %d0 -+ mmu_map (PAGE_OFFSET+7*1024*1024), (7*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, MMUDR_LK, %d0 -+#endif -+ /* -+ * Do unity mapping to enable the MMU. Map first chunk of memory -+ * in place as code/data. The TLBs will be deleted after the MMU is -+ * enabled and we are executing in high memory. -+ */ -+ -+#if defined(CONFIG_M5445X) -+ /* Map first 16 MB as code */ -+ mmu_map (PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \ -+ MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_INC, MMUDR_SP, 0, \ -+ 0, MMUDR_X, 0, %d0 -+ /* Map first 16 MB as data too */ -+ mmu_map (PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ -+ 0, 0, %d0 -+#elif defined(CONFIG_M547X_8X) -+ /* Map first 4 MB as code */ -+ mmu_map (0*1024*1024), (0*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, \ -+ MMUDR_X, 0, %d0 -+ mmu_map (1*1024*1024), (1*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, \ -+ MMUDR_X, 0, %d0 -+ mmu_map (2*1024*1024), (2*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, \ -+ MMUDR_X, 0, %d0 -+ mmu_map (3*1024*1024), (3*1024*1024), MMUOR_ITLB, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_IC, MMUDR_SP, 0, 0, \ -+ MMUDR_X, 0, %d0 -+ -+ /* Map first 4 MB as data too */ -+ mmu_map (0*1024*1024), (0*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, 0, %d0 -+ mmu_map (1*1024*1024), (1*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, 0, %d0 -+ mmu_map (2*1024*1024), (2*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, 0, %d0 -+ mmu_map (3*1024*1024), (3*1024*1024), 0, 0, \ -+ MMUTR_SG, MMUDR_SZ1M, MMUDR_DCB, MMUDR_SP, MMUDR_R, \ -+ MMUDR_W, 0, 0, %d0 -+#endif -+#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */ -+ -+ /* Turn on MMU */ -+ movel #(MMUCR_EN),%a0 -+ movel %a0,MMUCR -+ nop /* This synchs the pipeline after a write to MMUCR */ -+ -+ movel #__running_high,%a0 /* Get around PC-relative addressing. */ -+ jmp %a0@ -+ -+ENTRY(__running_high) -+ load_symbol_address _stext,%sp -+ movel L(memory_start),%a0 -+ movel %a0,availmem -+ load_symbol_address L(phys_kernel_start),%a0 -+ load_symbol_address _stext,%a1 -+ subl #_stext,%a1 -+ addl #PAGE_OFFSET,%a1 -+ movel %a1,%a0@ -+ -+/* zero bss */ -+ lea _sbss,%a0 -+ lea _ebss,%a1 -+ clrl %d0 -+_loop_bss: -+ movel %d0,(%a0)+ -+ cmpl %a0,%a1 -+ bne _loop_bss -+ -+ /* Unmap unity mappings */ -+#if CONFIG_SDRAM_BASE != PAGE_OFFSET -+#if defined(CONFIG_M5445X) -+ mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0 -+ mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0 -+#elif defined(CONFIG_M547X_8X) -+ mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0 -+ mmu_unmap (PHYS_OFFSET+1*0x1000000), MMUOR_ITLB, %d0 -+ mmu_unmap (PHYS_OFFSET+2*0x1000000), MMUOR_ITLB, %d0 -+ mmu_unmap (PHYS_OFFSET+3*0x1000000), MMUOR_ITLB, %d0 -+ mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0 -+ mmu_unmap (PHYS_OFFSET+1*0x1000000), 0, %d0 -+ mmu_unmap (PHYS_OFFSET+2*0x1000000), 0, %d0 -+ mmu_unmap (PHYS_OFFSET+3*0x1000000), 0, %d0 -+#endif -+#endif /* CONFIG_SDRAM_BASE != PAGE_OFFSET */ -+ -+/* Setup initial stack pointer */ -+ lea init_task,%a2 -+ lea init_thread_union+THREAD_SIZE,%sp -+ subl %a6,%a6 /* clear a6 for gdb */ -+ -+#ifdef CONFIG_MCF_USER_HALT -+/* Setup debug control reg to allow halts from user space */ -+ lea wdbg_uhe,%a0 -+ wdebug (%a0) -+#endif -+ -+ movel %a4,uboot_info_stk /* save uboot info to variable */ -+ jsr cf_early_init -+ jmp start_kernel -+ -+.section ".text.head","ax" -+set_context: -+func_start set_context,%d0,(1*4) -+ movel 12(%sp),%d0 -+ movec %d0,%asid -+func_return set_context -+ -+#ifdef CONFIG_M5445X -+/* -+ * set_fpga(addr,val) on the M5445X -+ * -+ * Map in 0x00000000 -> 0x0fffffff and then do the write. -+ */ -+set_fpga: -+#if 0 -+ movew %sr,%d1 -+ movew #0x2700,%sr -+ movel ACR0_FPGA, %d0 -+ movec %d0, %acr0 -+ nop -+ moveal 4(%sp),%a0 -+ movel 8(%sp),%a0@ -+ movel ACR0_DEFAULT, %d0 -+ movec %d0, %acr0 -+ nop -+ movew %d1,%sr -+#endif -+ rts -+#endif -+ -+ .data -+ .align 4 -+ -+availmem: -+ .long 0 -+L(phys_kernel_start): -+ .long PAGE_OFFSET -+L(kernel_end): -+ .long 0 -+L(memory_start): -+ .long PAGE_OFFSET_RAW -+ -+#ifdef CONFIG_MCF_USER_HALT -+/* -+ * Enable User Halt Enable in the debug control register. -+ */ -+wdbg_uhe: -+ .word 0x2c80 /* DR0 */ -+ .word 0x00b0 /* 31:16 */ -+ .word 0x0400 /* 15:0 -- enable UHE */ -+ .word 0x0000 /* unused */ -+#endif -+ -+ ---- /dev/null -+++ b/arch/m68k/coldfire/ints.c -@@ -0,0 +1,463 @@ -+/* -+ * linux/arch/m68k/coldfire/ints.c -- General interrupt handling code -+ * -+ * Copyright (C) 1999-2002 Greg Ungerer (gerg@snapgear.com) -+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, -+ * Kenneth Albanowski <kjahds@kjahds.com>, -+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com) -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007, 2008 -+ * Kurt Mahan kmahan@freescale.com -+ * Matt Waddel Matt.Waddel@freescale.com -+ * -+ * Based on: -+ * linux/arch/m68k/kernel/ints.c & -+ * linux/arch/m68knommu/5307/ints.c -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/sched.h> -+#include <linux/kernel_stat.h> -+#include <linux/errno.h> -+#include <linux/seq_file.h> -+#include <linux/interrupt.h> -+ -+#include <asm/system.h> -+#include <asm/irq.h> -+#include <asm/traps.h> -+#include <asm/page.h> -+#include <asm/machdep.h> -+#include <asm/irq_regs.h> -+ -+#include <asm/mcfsim.h> -+ -+/* -+ * IRQ Handler lists. -+ */ -+static struct irq_node *irq_list[SYS_IRQS]; -+static struct irq_controller *irq_controller[SYS_IRQS]; -+static int irq_depth[SYS_IRQS]; -+ -+/* -+ * IRQ Controller -+ */ -+#if defined(CONFIG_M5445X) -+void m5445x_irq_enable(unsigned int irq); -+void m5445x_irq_disable(unsigned int irq); -+static struct irq_controller m5445x_irq_controller = { -+ .name = "M5445X", -+ .lock = SPIN_LOCK_UNLOCKED, -+ .enable = m5445x_irq_enable, -+ .disable = m5445x_irq_disable, -+}; -+#elif defined(CONFIG_M547X_8X) -+void m547x_8x_irq_enable(unsigned int irq); -+void m547x_8x_irq_disable(unsigned int irq); -+static struct irq_controller m547x_8x_irq_controller = { -+ .name = "M547X_8X", -+ .lock = SPIN_LOCK_UNLOCKED, -+ .enable = m547x_8x_irq_enable, -+ .disable = m547x_8x_irq_disable, -+}; -+#else -+# error No IRQ controller defined -+#endif -+ -+#define POOL_SIZE SYS_IRQS -+static struct irq_node pool[POOL_SIZE]; -+static struct irq_node *get_irq_node(void); -+ -+/* The number of spurious interrupts */ -+unsigned int num_spurious; -+asmlinkage void handle_badint(struct pt_regs *regs); -+ -+/* -+ * void init_IRQ(void) -+ * -+ * This function should be called during kernel startup to initialize -+ * the IRQ handling routines. -+ */ -+void __init init_IRQ(void) -+{ -+ int i; -+ -+#if defined(CONFIG_M5445X) -+ for (i = 0; i < SYS_IRQS; i++) -+ irq_controller[i] = &m5445x_irq_controller; -+#elif defined(CONFIG_M547X_8X) -+ for (i = 0; i < SYS_IRQS; i++) -+ irq_controller[i] = &m547x_8x_irq_controller; -+#endif -+} -+ -+/* -+ * process_int(unsigned long vec, struct pt_regs *fp) -+ * -+ * Process an interrupt. Called from entry.S. -+ */ -+asmlinkage void process_int(unsigned long vec, struct pt_regs *fp) -+{ -+ struct pt_regs *old_regs; -+ struct irq_node *node; -+ old_regs = set_irq_regs(fp); -+ kstat_cpu(0).irqs[vec]++; -+ -+ node = irq_list[vec]; -+ if (!node) -+ handle_badint(fp); -+ else { -+ do { -+ node->handler(vec, node->dev_id); -+ node = node->next; -+ } while (node); -+ } -+ -+ set_irq_regs(old_regs); -+} -+ -+/* -+ * show_interrupts( struct seq_file *p, void *v) -+ * -+ * Called to show all the current interrupt information. -+ */ -+int show_interrupts(struct seq_file *p, void *v) -+{ -+ struct irq_controller *contr; -+ struct irq_node *node; -+ int i = *(loff_t *) v; -+ -+ if ((i < NR_IRQS) && (irq_list[i])) { -+ contr = irq_controller[i]; -+ node = irq_list[i]; -+ seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, -+ kstat_cpu(0).irqs[i], node->devname); -+ while ((node = node->next)) -+ seq_printf(p, ", %s", node->devname); -+ -+ seq_printf(p, "\n"); -+ } -+ -+ return 0; -+} -+ -+/* -+ * get_irq_node(void) -+ * -+ * Get an irq node from the pool. -+ */ -+struct irq_node *get_irq_node(void) -+{ -+ struct irq_node *p = pool; -+ int i; -+ -+ for (i = 0; i < POOL_SIZE; i++, p++) { -+ if (!p->handler) { -+ memset(p, 0, sizeof(struct irq_node)); -+ return p; -+ } -+ } -+ printk(KERN_INFO "%s(%s:%d): No more irq nodes, I suggest you \ -+ increase POOL_SIZE", __FUNCTION__, __FILE__, __LINE__); -+ return NULL; -+} -+ -+void init_irq_proc(void) -+{ -+ /* Insert /proc/irq driver here */ -+} -+ -+int setup_irq(unsigned int irq, struct irq_node *node) -+{ -+ struct irq_controller *contr; -+ struct irq_node **prev; -+ unsigned long flags; -+ -+ if (irq >= NR_IRQS || !irq_controller[irq]) { -+ printk("%s: Incorrect IRQ %d from %s\n", -+ __FUNCTION__, irq, node->devname); -+ return -ENXIO; -+ } -+ -+ contr = irq_controller[irq]; -+ spin_lock_irqsave(&contr->lock, flags); -+ -+ prev = irq_list + irq; -+ if (*prev) { -+ /* Can't share interrupts unless both agree to */ -+ if (!((*prev)->flags & node->flags & IRQF_SHARED)) { -+ spin_unlock_irqrestore(&contr->lock, flags); -+ printk(KERN_INFO "%s: -BUSY-Incorrect IRQ %d \n", -+ __FUNCTION__, irq); -+ return -EBUSY; -+ } -+ while (*prev) -+ prev = &(*prev)->next; -+ } -+ -+ if (!irq_list[irq]) { -+ if (contr->startup) -+ contr->startup(irq); -+ else -+ contr->enable(irq); -+ } -+ node->next = NULL; -+ *prev = node; -+ -+ spin_unlock_irqrestore(&contr->lock, flags); -+ -+ return 0; -+} -+ -+int request_irq(unsigned int irq, -+ irq_handler_t handler, -+ unsigned long flags, const char *devname, void *dev_id) -+{ -+ struct irq_node *node = get_irq_node(); -+ int res; -+ -+ if (!node) { -+ printk(KERN_INFO "%s:get_irq_node error %x\n", -+ __FUNCTION__,(unsigned int) node); -+ return -ENOMEM; -+ } -+ node->handler = handler; -+ node->flags = flags; -+ node->dev_id = dev_id; -+ node->devname = devname; -+ -+ res = setup_irq(irq, node); -+ if (res) -+ node->handler = NULL; -+ -+ return res; -+} -+EXPORT_SYMBOL(request_irq); -+ -+void free_irq(unsigned int irq, void *dev_id) -+{ -+ struct irq_controller *contr; -+ struct irq_node **p, *node; -+ unsigned long flags; -+ -+ if (irq >= NR_IRQS || !irq_controller[irq]) { -+ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq); -+ return; -+ } -+ -+ contr = irq_controller[irq]; -+ spin_lock_irqsave(&contr->lock, flags); -+ -+ p = irq_list + irq; -+ while ((node = *p)) { -+ if (node->dev_id == dev_id) -+ break; -+ p = &node->next; -+ } -+ -+ if (node) { -+ *p = node->next; -+ node->handler = NULL; -+ } else -+ printk(KERN_DEBUG "%s: Removing probably wrong IRQ %d\n", -+ __FUNCTION__, irq); -+ -+ if (!irq_list[irq]) { -+ if (contr->shutdown) -+ contr->shutdown(irq); -+ else -+ contr->disable(irq); -+ } -+ -+ spin_unlock_irqrestore(&contr->lock, flags); -+} -+EXPORT_SYMBOL(free_irq); -+ -+void enable_irq(unsigned int irq) -+{ -+ struct irq_controller *contr; -+ unsigned long flags; -+ -+ if (irq >= NR_IRQS || !irq_controller[irq]) { -+ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq); -+ return; -+ } -+ -+ contr = irq_controller[irq]; -+ spin_lock_irqsave(&contr->lock, flags); -+ if (irq_depth[irq]) { -+ if (!--irq_depth[irq]) { -+ if (contr->enable) -+ contr->enable(irq); -+ } -+ } else -+ WARN_ON(1); -+ spin_unlock_irqrestore(&contr->lock, flags); -+} -+EXPORT_SYMBOL(enable_irq); -+ -+void disable_irq(unsigned int irq) -+{ -+ struct irq_controller *contr; -+ unsigned long flags; -+ -+ if (irq >= NR_IRQS || !irq_controller[irq]) { -+ printk(KERN_DEBUG "%s: Incorrect IRQ %d\n", __FUNCTION__, irq); -+ return; -+ } -+ -+ contr = irq_controller[irq]; -+ spin_lock_irqsave(&contr->lock, flags); -+ if (!irq_depth[irq]++) { -+ if (contr->disable) -+ contr->disable(irq); -+ } -+ spin_unlock_irqrestore(&contr->lock, flags); -+} -+EXPORT_SYMBOL(disable_irq); -+ -+void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); -+EXPORT_SYMBOL(disable_irq_nosync); -+ -+ -+unsigned long probe_irq_on(void) -+{ -+ return 0; -+} -+EXPORT_SYMBOL(probe_irq_on); -+ -+int probe_irq_off(unsigned long irqs) -+{ -+ return 0; -+} -+EXPORT_SYMBOL(probe_irq_off); -+ -+asmlinkage void handle_badint(struct pt_regs *regs) -+{ -+ kstat_cpu(0).irqs[0]++; -+ num_spurious++; -+ printk(KERN_DEBUG "unexpected interrupt from %u\n", regs->vector); -+} -+EXPORT_SYMBOL(handle_badint); -+ -+#ifdef CONFIG_M5445X -+/* -+ * M5445X Implementation -+ */ -+void m5445x_irq_enable(unsigned int irq) -+{ -+ /* enable the interrupt hardware */ -+ if (irq < 64) -+ return; -+ -+ /* adjust past non-hardware ints */ -+ irq -= 64; -+ -+ /* check for eport */ -+ if ((irq > 0) && (irq < 8)) { -+ /* enable eport */ -+ MCF_EPORT_EPPAR &= ~(3 << (irq*2)); /* level */ -+ MCF_EPORT_EPDDR &= ~(1 << irq); /* input */ -+ MCF_EPORT_EPIER |= 1 << irq; /* irq enabled */ -+ } -+ -+ if (irq < 64) { -+ /* controller 0 */ -+ MCF_INTC0_ICR(irq) = 0x02; -+ MCF_INTC0_CIMR = irq; -+ } else { -+ /* controller 1 */ -+ irq -= 64; -+ MCF_INTC1_ICR(irq) = 0x02; -+ MCF_INTC1_CIMR = irq; -+ } -+} -+ -+void m5445x_irq_disable(unsigned int irq) -+{ -+ /* disable the interrupt hardware */ -+ if (irq < 64) -+ return; -+ -+ /* adjust past non-hardware ints */ -+ irq -= 64; -+ -+ /* check for eport */ -+ if ((irq > 0) && (irq < 8)) { -+ /* disable eport */ -+ MCF_EPORT_EPIER &= ~(1 << irq); -+ } -+ -+ if (irq < 64) { -+ /* controller 0 */ -+ MCF_INTC0_ICR(irq) = 0x00; -+ MCF_INTC0_SIMR = irq; -+ } else { -+ /* controller 1 */ -+ irq -= 64; -+ MCF_INTC1_ICR(irq) = 0x00; -+ MCF_INTC1_SIMR = irq; -+ } -+} -+#elif defined(CONFIG_M547X_8X) -+/* -+ * M547X_8X Implementation -+ */ -+void m547x_8x_irq_enable(unsigned int irq) -+{ -+ /* enable the interrupt hardware */ -+ if (irq < 64) -+ return; -+ -+ /* adjust past non-hardware ints */ -+ irq -= 64; -+ -+/* JKM -- re-add EPORT later */ -+#if 0 -+ /* check for eport */ -+ if ((irq > 0) && (irq < 8)) { -+ /* enable eport */ -+ MCF_EPORT_EPPAR &= ~(3 << (irq*2)); /* level */ -+ MCF_EPORT_EPDDR &= ~(1 << irq); /* input */ -+ MCF_EPORT_EPIER |= 1 << irq; /* irq enabled */ -+ } -+#endif -+ -+ if (irq < 32) { -+ /* *grumble* don't set low bit of IMRL */ -+ MCF_IMRL &= (~(1 << irq) & 0xfffffffe); -+ } -+ else { -+ MCF_IMRH &= ~(1 << (irq - 32)); -+ } -+} -+ -+void m547x_8x_irq_disable(unsigned int irq) -+{ -+ /* disable the interrupt hardware */ -+ if (irq < 64) -+ return; -+ -+ /* adjust past non-hardware ints */ -+ irq -= 64; -+ -+/* JKM -- re-add EPORT later */ -+#if 0 -+ /* check for eport */ -+ if ((irq > 0) && (irq < 8)) { -+ /* disable eport */ -+ MCF_EPORT_EPIER &= ~(1 << irq); -+ } -+#endif -+ -+ if (irq < 32) -+ MCF_IMRL |= (1 << irq); -+ else -+ MCF_IMRH |= (1 << (irq - 32)); -+} -+#endif ---- /dev/null -+++ b/arch/m68k/coldfire/iomap.c -@@ -0,0 +1,56 @@ -+/* -+ * arch/m68k/coldfire/iomap.c -+ * -+ * Generic coldfire iomap interface -+ * -+ * Based on the sh64 iomap.c by Paul Mundt. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ */ -+#include <linux/pci.h> -+#include <asm/io.h> -+ -+#if 0 -+void __iomem *__attribute__ ((weak)) -+ioport_map(unsigned long port, unsigned int len) -+{ -+ return (void __iomem *)port; -+} -+EXPORT_SYMBOL(pci_iomap); -+ -+void ioport_unmap(void __iomem *addr) -+{ -+ /* Nothing .. */ -+} -+EXPORT_SYMBOL(pci_iounmap); -+ -+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) -+{ -+ unsigned long start = pci_resource_start(dev, bar); -+ unsigned long len = pci_resource_len(dev, bar); -+ unsigned long flags = pci_resource_flags(dev, bar); -+printk(KERN_INFO "PCI_IOMAP: BAR=%d START=0x%lx LEN=0x%lx FLAGS=0x%lx\n", -+ bar, start, len, flags); -+ -+ if (!len) -+ return NULL; -+ if (max && len > max) -+ len = max; -+ if (flags & IORESOURCE_IO) -+ return ioport_map(start, len); -+ if (flags & IORESOURCE_MEM) -+ return (void __iomem *)start; -+ -+ /* What? */ -+ return NULL; -+} -+EXPORT_SYMBOL(ioport_map); -+ -+void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -+{ -+ /* Nothing .. */ -+} -+EXPORT_SYMBOL(ioport_unmap); -+#endif ---- /dev/null -+++ b/arch/m68k/coldfire/m547x_8x-devices.c -@@ -0,0 +1,163 @@ -+/* -+ * arch/m68k/coldfire/m547x_8x-devices.c -+ * -+ * Coldfire M547x/M548x Platform Device Configuration -+ * -+ * Copyright (c) 2008 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ */ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/fsl_devices.h> -+#include <linux/spi/spi.h> -+ -+#include <asm/coldfire.h> -+#include <asm/mcfsim.h> -+#include <asm/mcfqspi.h> -+ -+ -+#ifdef CONFIG_SPI -+/* -+ * -+ * DSPI -+ * -+ */ -+ -+/* number of supported SPI selects */ -+#define SPI_NUM_CHIPSELECTS 8 -+ -+void coldfire_spi_cs_control(u8 cs, u8 command) -+{ -+ /* nothing special required */ -+} -+ -+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -+static struct coldfire_spi_chip spidev_chip_info = { -+ .bits_per_word = 8, -+}; -+#endif -+ -+static struct spi_board_info spi_board_info[] = { -+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -+ { -+ .modalias = "spidev", -+ .max_speed_hz = 16000000, /* max clk (SCK) speed in HZ */ -+ .bus_num = 1, -+ .chip_select = 0, /* CS0 */ -+ .controller_data = &spidev_chip_info, -+ } -+#endif -+}; -+ -+static int spi_irq_list[] = { -+ /* IRQ, ICR Offset, ICR Val,Mask */ -+ 64 + ISC_DSPI_OVRFW, ISC_DSPI_OVRFW, 0x18, 0, -+ 64 + ISC_DSPI_RFOF, ISC_DSPI_RFOF, 0x18, 0, -+ 64 + ISC_DSPI_RFDF, ISC_DSPI_RFDF, 0x18, 0, -+ 64 + ISC_DSPI_TFUF, ISC_DSPI_TFUF, 0x18, 0, -+ 64 + ISC_DSPI_TCF, ISC_DSPI_TCF, 0x18, 0, -+ 64 + ISC_DSPI_TFFF, ISC_DSPI_TFFF, 0x18, 0, -+ 64 + ISC_DSPI_EOQF, ISC_DSPI_EOQF, 0x18, 0, -+ 0,0,0,0, -+}; -+ -+static struct coldfire_spi_master coldfire_master_info = { -+ .bus_num = 1, -+ .num_chipselect = SPI_NUM_CHIPSELECTS, -+ .irq_list = spi_irq_list, -+ .irq_source = 0, /* not used */ -+ .irq_vector = 0, /* not used */ -+ .irq_mask = 0, /* not used */ -+ .irq_lp = 0, /* not used */ -+ .par_val = 0, /* not used */ -+ .cs_control = coldfire_spi_cs_control, -+}; -+ -+static struct resource coldfire_spi_resources[] = { -+ [0] = { -+ .name = "spi-par", -+ .start = MCF_MBAR + 0x00000a50, /* PAR_DSPI */ -+ .end = MCF_MBAR + 0x00000a50, /* PAR_DSPI */ -+ .flags = IORESOURCE_MEM -+ }, -+ -+ [1] = { -+ .name = "spi-module", -+ .start = MCF_MBAR + 0x00008a00, /* DSPI MCR Base */ -+ .end = MCF_MBAR + 0x00008ab8, /* DSPI mem map end */ -+ .flags = IORESOURCE_MEM -+ }, -+ -+ [2] = { -+ .name = "spi-int-level", -+ .start = MCF_MBAR + 0x740, /* ICR start */ -+ .end = MCF_MBAR + 0x740 + ISC_DSPI_EOQF, /* ICR end */ -+ .flags = IORESOURCE_MEM -+ }, -+ -+ [3] = { -+ .name = "spi-int-mask", -+ .start = MCF_MBAR + 0x70c, /* IMRL */ -+ .end = MCF_MBAR + 0x70c, /* IMRL */ -+ .flags = IORESOURCE_MEM -+ } -+}; -+ -+static struct platform_device coldfire_spi = { -+ .name = "spi_coldfire", -+ .id = -1, -+ .resource = coldfire_spi_resources, -+ .num_resources = ARRAY_SIZE(coldfire_spi_resources), -+ .dev = { -+ .platform_data = &coldfire_master_info, -+ } -+}; -+ -+/** -+ * m547x_8x_spi_init - Initialize SPI -+ */ -+static int __init m547x_8x_spi_init(void) -+{ -+ int retval; -+ -+ /* initialize the DSPI PAR */ -+ MCF_GPIO_PAR_DSPI = (MCF_GPIO_PAR_DSPI_PAR_CS5 | -+ MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS | -+ MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS | -+ MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS | -+ MCF_GPIO_PAR_DSPI_PAR_SCK_SCK | -+ MCF_GPIO_PAR_DSPI_PAR_SIN_SIN | -+ MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT); -+ -+ /* register device */ -+ retval = platform_device_register(&coldfire_spi); -+ if (retval < 0) { -+ goto out; -+ } -+ -+ /* register board info */ -+ if (ARRAY_SIZE(spi_board_info)) -+ retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); -+ -+out: -+ return retval; -+} -+#endif -+ -+ -+/** -+ * m547x_8x_init_devices - Initialize M547X_8X devices -+ * -+ * Returns 0 on success. -+ */ -+static int __init m547x_8x_init_devices(void) -+{ -+#ifdef CONFIG_SPI -+ m547x_8x_spi_init(); -+#endif -+ -+ return 0; -+} -+arch_initcall(m547x_8x_init_devices); ---- /dev/null -+++ b/arch/m68k/coldfire/m547x_8x-dma.c -@@ -0,0 +1,516 @@ -+/* -+ * arch/m68k/coldfire/m547x_8x-dma.c -+ * -+ * Coldfire M547x/M548x DMA -+ * -+ * Copyright (c) 2008 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ * -+ * This code is based on patches from the Freescale M547x_8x BSP -+ * release mcf547x_8x-20070107-ltib.iso -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/kernel.h> -+#include <linux/sched.h> -+#include <linux/mm.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <asm/io.h> -+#include <asm/irq.h> -+#include <asm/dma.h> -+#include <asm/coldfire.h> -+#include <asm/m5485sram.h> -+#include <asm/mcfsim.h> -+ -+/* -+ * This global keeps track of which initiators have been -+ * used of the available assignments. Initiators 0-15 are -+ * hardwired. Initiators 16-31 are multiplexed and controlled -+ * via the Initiatior Mux Control Registe (IMCR). The -+ * assigned requestor is stored with the associated initiator -+ * number. -+ */ -+static int used_reqs[32] = { -+ DMA_ALWAYS, DMA_DSPI_RX, DMA_DSPI_TX, DMA_DREQ0, -+ DMA_PSC0_RX, DMA_PSC0_TX, DMA_USBEP0, DMA_USBEP1, -+ DMA_USBEP2, DMA_USBEP3, DMA_PCI_TX, DMA_PCI_RX, -+ DMA_PSC1_RX, DMA_PSC1_TX, DMA_I2C_RX, DMA_I2C_TX, -+ 0, 0, 0, 0, -+ 0, 0, 0, 0, -+ 0, 0, 0, 0, -+ 0, 0, 0, 0 -+}; -+ -+/* -+ * This global keeps track of which channels have been assigned -+ * to tasks. This methology assumes that no single initiator -+ * will be tied to more than one task/channel -+ */ -+static char used_channel[16] = { -+ -1, -1, -1, -1, -1, -1, -1, -1, -+ -1, -1, -1, -1, -1, -1, -1, -1 -+}; -+ -+unsigned int connected_channel[16] = { -+ 0, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 0 -+}; -+ -+/** -+ * dma_set_initiator - enable initiator -+ * @initiator: initiator identifier -+ * -+ * Returns 0 of successful, non-zero otherwise -+ * -+ * Attempt to enable the provided Initiator in the Initiator -+ * Mux Control Register. -+ */ -+int dma_set_initiator(int initiator) -+{ -+ switch (initiator) { -+ case DMA_ALWAYS: -+ case DMA_DSPI_RX: -+ case DMA_DSPI_TX: -+ case DMA_DREQ0: -+ case DMA_PSC0_RX: -+ case DMA_PSC0_TX: -+ case DMA_USBEP0: -+ case DMA_USBEP1: -+ case DMA_USBEP2: -+ case DMA_USBEP3: -+ case DMA_PCI_TX: -+ case DMA_PCI_RX: -+ case DMA_PSC1_RX: -+ case DMA_PSC1_TX: -+ case DMA_I2C_RX: -+ case DMA_I2C_TX: -+ /* -+ * These initiators are always active -+ */ -+ break; -+ -+ case DMA_FEC0_RX: -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC16(3)) -+ | MCF_DMA_IMCR_SRC16_FEC0RX; -+ used_reqs[16] = DMA_FEC0_RX; -+ break; -+ -+ case DMA_FEC0_TX: -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC17(3)) -+ | MCF_DMA_IMCR_SRC17_FEC0TX; -+ used_reqs[17] = DMA_FEC0_TX; -+ break; -+ -+ case DMA_FEC1_RX: -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC20(3)) -+ | MCF_DMA_IMCR_SRC20_FEC1RX; -+ used_reqs[20] = DMA_FEC1_RX; -+ break; -+ -+ case DMA_FEC1_TX: -+ if (used_reqs[21] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3)) -+ | MCF_DMA_IMCR_SRC21_FEC1TX; -+ used_reqs[21] = DMA_FEC1_TX; -+ } else if (used_reqs[25] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3)) -+ | MCF_DMA_IMCR_SRC25_FEC1TX; -+ used_reqs[25] = DMA_FEC1_TX; -+ } else if (used_reqs[31] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3)) -+ | MCF_DMA_IMCR_SRC31_FEC1TX; -+ used_reqs[31] = DMA_FEC1_TX; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_DREQ1: -+ if (used_reqs[29] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3)) -+ | MCF_DMA_IMCR_SRC29_DREQ1; -+ used_reqs[29] = DMA_DREQ1; -+ } else if (used_reqs[21] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC21(3)) -+ | MCF_DMA_IMCR_SRC21_DREQ1; -+ used_reqs[21] = DMA_DREQ1; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_CTM0: -+ if (used_reqs[24] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC24(3)) -+ | MCF_DMA_IMCR_SRC24_CTM0; -+ used_reqs[24] = DMA_CTM0; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_CTM1: -+ if (used_reqs[25] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC25(3)) -+ | MCF_DMA_IMCR_SRC25_CTM1; -+ used_reqs[25] = DMA_CTM1; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_CTM2: -+ if (used_reqs[26] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3)) -+ | MCF_DMA_IMCR_SRC26_CTM2; -+ used_reqs[26] = DMA_CTM2; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_CTM3: -+ if (used_reqs[27] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3)) -+ | MCF_DMA_IMCR_SRC27_CTM3; -+ used_reqs[27] = DMA_CTM3; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_CTM4: -+ if (used_reqs[28] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3)) -+ | MCF_DMA_IMCR_SRC28_CTM4; -+ used_reqs[28] = DMA_CTM4; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_CTM5: -+ if (used_reqs[29] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3)) -+ | MCF_DMA_IMCR_SRC29_CTM5; -+ used_reqs[29] = DMA_CTM5; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_CTM6: -+ if (used_reqs[30] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3)) -+ | MCF_DMA_IMCR_SRC30_CTM6; -+ used_reqs[30] = DMA_CTM6; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_CTM7: -+ if (used_reqs[31] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3)) -+ | MCF_DMA_IMCR_SRC31_CTM7; -+ used_reqs[31] = DMA_CTM7; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_USBEP4: -+ if (used_reqs[26] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC26(3)) -+ | MCF_DMA_IMCR_SRC26_USBEP4; -+ used_reqs[26] = DMA_USBEP4; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_USBEP5: -+ if (used_reqs[27] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC27(3)) -+ | MCF_DMA_IMCR_SRC27_USBEP5; -+ used_reqs[27] = DMA_USBEP5; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_USBEP6: -+ if (used_reqs[28] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3)) -+ | MCF_DMA_IMCR_SRC28_USBEP6; -+ used_reqs[28] = DMA_USBEP6; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_PSC2_RX: -+ if (used_reqs[28] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC28(3)) -+ | MCF_DMA_IMCR_SRC28_PSC2RX; -+ used_reqs[28] = DMA_PSC2_RX; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_PSC2_TX: -+ if (used_reqs[29] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC29(3)) -+ | MCF_DMA_IMCR_SRC29_PSC2TX; -+ used_reqs[29] = DMA_PSC2_TX; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_PSC3_RX: -+ if (used_reqs[30] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC30(3)) -+ | MCF_DMA_IMCR_SRC30_PSC3RX; -+ used_reqs[30] = DMA_PSC3_RX; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ case DMA_PSC3_TX: -+ if (used_reqs[31] == 0) { -+ MCF_DMA_IMCR = (MCF_DMA_IMCR & ~MCF_DMA_IMCR_SRC31(3)) -+ | MCF_DMA_IMCR_SRC31_PSC3TX; -+ used_reqs[31] = DMA_PSC3_TX; -+ } else /* No empty slots */ -+ return 1; -+ break; -+ -+ default: -+ return 1; -+ } -+ return 0; -+} -+ -+/** -+ * dma_get_initiator - get the initiator for the given requestor -+ * @requestor: initiator identifier -+ * -+ * Returns initiator number (0-31) if assigned or just 0 -+ */ -+unsigned int dma_get_initiator(int requestor) -+{ -+ u32 i; -+ -+ for (i = 0; i < sizeof(used_reqs); ++i) { -+ if (used_reqs[i] == requestor) -+ return i; -+ } -+ return 0; -+} -+ -+/** -+ * dma_remove_initiator - remove the given initiator from active list -+ * @requestor: requestor to remove -+ */ -+void dma_remove_initiator(int requestor) -+{ -+ u32 i; -+ -+ for (i = 0; i < sizeof(used_reqs); ++i) { -+ if (used_reqs[i] == requestor) { -+ used_reqs[i] = -1; -+ break; -+ } -+ } -+} -+ -+/** -+ * dma_set_channel_fec: find available channel for fec and mark -+ * @requestor: initiator/requestor identifier -+ * -+ * Returns first avaialble channel (0-5) or -1 if all occupied -+ */ -+int dma_set_channel_fec(int requestor) -+{ -+ u32 i, t; -+ -+#ifdef CONFIG_FEC_548x_ENABLE_FEC2 -+ t = 4; -+#else -+ t = 2; -+#endif -+ -+ for (i = 0; i < t ; ++i) { -+ if (used_channel[i] == -1) { -+ used_channel[i] = requestor; -+ return i; -+ } -+ } -+ /* All channels taken */ -+ return -1; -+} -+ -+/** -+ * dma_set_channel - find an available channel and mark as used -+ * @requestor: initiator/requestor identifier -+ * -+ * Returns first available channel (6-15) or -1 if all occupied -+ */ -+int dma_set_channel(int requestor) -+{ -+ u32 i; -+#ifdef CONFIG_NET_FEC2 -+ i = 4; -+#else -+ i = 2; -+#endif -+ -+ for (; i < 16; ++i) -+ if (used_channel[i] == -1) { -+ used_channel[i] = requestor; -+ return i; -+ } -+ -+ /* All channels taken */ -+ return -1; -+} -+ -+/** -+ * dma_get_channel - get the channel being initiated by the requestor -+ * @requestor: initiator/requestor identifier -+ * -+ * Returns Initiator for requestor or -1 if not found -+ */ -+int dma_get_channel(int requestor) -+{ -+ u32 i; -+ -+ for (i = 0; i < sizeof(used_channel); ++i) { -+ if (used_channel[i] == requestor) -+ return i; -+ } -+ return -1; -+} -+ -+/** -+ * dma_connect - connect a channel with reference on data -+ * @channel: channel number -+ * @address: reference address of data -+ * -+ * Returns 0 if success or -1 if invalid channel -+ */ -+int dma_connect(int channel, int address) -+{ -+ if ((channel < 16) && (channel >= 0)) { -+ connected_channel[channel] = address; -+ return 0; -+ } -+ return -1; -+} -+ -+/** -+ * dma_disconnect - disconnect a channel -+ * @channel: channel number -+ * -+ * Returns 0 if success or -1 if invalid channel -+ */ -+int dma_disconnect(int channel) -+{ -+ if ((channel < 16) && (channel >= 0)) { -+ connected_channel[channel] = 0; -+ return 0; -+ } -+ return -1; -+} -+ -+/** -+ * dma_remove_channel - remove channel from the active list -+ * @requestor: initiator/requestor identifier -+ */ -+void dma_remove_channel(int requestor) -+{ -+ u32 i; -+ -+ for (i = 0; i < sizeof(used_channel); ++i) { -+ if (used_channel[i] == requestor) { -+ used_channel[i] = -1; -+ break; -+ } -+ } -+} -+ -+/** -+ * dma_interrupt_handler - dma interrupt handler -+ * @irq: interrupt number -+ * @dev_id: data -+ * -+ * Returns IRQ_HANDLED -+ */ -+irqreturn_t dma_interrupt_handler(int irq, void *dev_id) -+{ -+ u32 i, interrupts; -+ -+ /* -+ * Determine which interrupt(s) triggered by AND'ing the -+ * pending interrupts with those that aren't masked. -+ */ -+ interrupts = MCF_DMA_DIPR; -+ MCF_DMA_DIPR = interrupts; -+ -+ for (i = 0; i < 16; ++i, interrupts >>= 1) { -+ if (interrupts & 0x1) -+ if (connected_channel[i] != 0) -+ ((void (*)(void)) (connected_channel[i])) (); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+/** -+ * dma_remove_channel_by_number - clear dma channel -+ * @channel: channel number to clear -+ */ -+void dma_remove_channel_by_number(int channel) -+{ -+ if ((channel < sizeof(used_channel)) && (channel >= 0)) -+ used_channel[channel] = -1; -+} -+ -+/** -+ * dma_init - initialize the dma subsystem -+ * -+ * Returns 0 if success non-zero if failure -+ * -+ * Handles the DMA initialization during device setup. -+ */ -+int __devinit dma_init() -+{ -+ int result; -+ char *dma_version_str; -+ -+ MCD_getVersion(&dma_version_str); -+ printk(KERN_INFO "m547x_8x DMA: Initialize %s\n", dma_version_str); -+ -+ /* attempt to setup dma interrupt handler */ -+ if (request_irq(64 + ISC_DMA, dma_interrupt_handler, IRQF_DISABLED, -+ "MCD-DMA", NULL)) { -+ printk(KERN_ERR "MCD-DMA: Cannot allocate the DMA IRQ(48)\n"); -+ return 1; -+ } -+ -+ MCF_DMA_DIMR = 0; -+ MCF_DMA_DIPR = 0xFFFFFFFF; -+ -+ MCF_ICR(ISC_DMA) = ILP_DMA; -+ -+ result = MCD_initDma((dmaRegs *) (MCF_MBAR + 0x8000), -+ (void *) SYS_SRAM_DMA_START, MCD_RELOC_TASKS); -+ if (result != MCD_OK) { -+ printk(KERN_ERR "MCD-DMA: Cannot perform DMA initialization\n"); -+ free_irq(64 + ISC_DMA, NULL); -+ return 1; -+ } -+ -+ return 0; -+} -+device_initcall(dma_init); ---- /dev/null -+++ b/arch/m68k/coldfire/Makefile -@@ -0,0 +1,20 @@ -+# -+# Makefile for Linux arch/m68k/coldfire source directory -+# -+ -+obj-y:= entry.o config.o cache.o signal.o muldi3.o traps.o ints.o -+ifdef CONFIG_M5445X -+ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),) -+ obj-y += usb.o usb/ -+endif -+endif -+ -+ifdef CONFIG_M547X_8X -+obj-$(CONFIG_PCI) += mcf548x-pci.o -+else -+obj-$(CONFIG_PCI) += pci.o mcf5445x-pci.o iomap.o -+endif -+obj-$(CONFIG_M5445X) += mcf5445x-devices.o -+obj-$(CONFIG_M547X_8X) += m547x_8x-devices.o -+obj-$(CONFIG_M547X_8X) += mcf548x-devices.o -+obj-$(CONFIG_MCD_DMA) += m547x_8x-dma.o ---- /dev/null -+++ b/arch/m68k/coldfire/mcf5445x-devices.c -@@ -0,0 +1,136 @@ -+/* -+ * arch/m68k/coldfire/mcf5445x-devices.c -+ * -+ * Coldfire M5445x Platform Device Configuration -+ * -+ * Based on the Freescale MXC devices.c -+ * -+ * Copyright (c) 2007 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ */ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/fsl_devices.h> -+ -+#include <asm/coldfire.h> -+#include <asm/mcfsim.h> -+ -+/* ATA Interrupt */ -+#define IRQ_ATA (64 + 64 + 54) -+ -+/* ATA Base */ -+#define BASE_IO_ATA 0x90000000 -+ -+#define ATA_IER MCF_REG08(BASE_IO_ATA+0x2c) /* int enable reg */ -+#define ATA_ICR MCF_REG08(BASE_IO_ATA+0x30) /* int clear reg */ -+ -+/* -+ * On-chip PATA -+ */ -+#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE) -+static int ata_init(struct platform_device *pdev) -+{ -+ /* clear ints */ -+ ATA_IER = 0x00; -+ ATA_ICR = 0xff; -+ -+ /* setup shared pins */ -+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & MCF_GPIO_PAR_FEC_FEC1_MASK) | -+ MCF_GPIO_PAR_FEC_FEC1_ATA; -+ -+ MCF_GPIO_PAR_FECI2C = (MCF_GPIO_PAR_FECI2C & -+ (MCF_GPIO_PAR_FECI2C_MDC1_MASK & -+ MCF_GPIO_PAR_FECI2C_MDIO1_MASK)) | -+ MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR | -+ MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW; -+ -+ MCF_GPIO_PAR_ATA = MCF_GPIO_PAR_ATA_BUFEN | -+ MCF_GPIO_PAR_ATA_CS1 | -+ MCF_GPIO_PAR_ATA_CS0 | -+ MCF_GPIO_PAR_ATA_DA2 | -+ MCF_GPIO_PAR_ATA_DA1 | -+ MCF_GPIO_PAR_ATA_DA0 | -+ MCF_GPIO_PAR_ATA_RESET_RESET | -+ MCF_GPIO_PAR_ATA_DMARQ_DMARQ | -+ MCF_GPIO_PAR_ATA_IORDY_IORDY; -+ -+ MCF_GPIO_PAR_PCI = (MCF_GPIO_PAR_PCI & -+ (MCF_GPIO_PAR_PCI_GNT3_MASK & -+ MCF_GPIO_PAR_PCI_REQ3_MASK)) | -+ MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK | -+ MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ; -+ -+ return 0; -+} -+ -+static void ata_exit(void) -+{ -+ printk(KERN_INFO "** ata_exit\n"); -+} -+ -+static int ata_get_clk_rate(void) -+{ -+ return MCF_BUSCLK; -+} -+ -+/* JKM -- move these to a header file */ -+#define MCF_IDE_DMA_WATERMARK 32 /* DMA watermark level in bytes */ -+#define MCF_IDE_DMA_BD_NR (512/3/4) /* number of BDs per channel */ -+ -+static struct fsl_ata_platform_data ata_data = { -+ .init = ata_init, -+ .exit = ata_exit, -+ .get_clk_rate = ata_get_clk_rate, -+#ifdef CONFIG_PATA_FSL_USE_DMA -+ .udma_mask = 0x0F, /* the board handles up to UDMA3 */ -+ .fifo_alarm = MCF_IDE_DMA_WATERMARK / 2, -+ .max_sg = MCF_IDE_DMA_BD_NR, -+#endif -+}; -+ -+static struct resource pata_fsl_resources[] = { -+ [0] = { /* I/O */ -+ .start = BASE_IO_ATA, -+ .end = BASE_IO_ATA + 0x000000d8, -+ .flags = IORESOURCE_MEM, -+ }, -+ [2] = { /* IRQ */ -+ .start = IRQ_ATA, -+ .end = IRQ_ATA, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device pata_fsl_device = { -+ .name = "pata_fsl", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(pata_fsl_resources), -+ .resource = pata_fsl_resources, -+ .dev = { -+ .platform_data = &ata_data, -+ .coherent_dma_mask = ~0, /* $$$ REVISIT */ -+ }, -+}; -+ -+static inline void mcf5445x_init_pata(void) -+{ -+ (void)platform_device_register(&pata_fsl_device); -+} -+#else -+static inline void mcf5445x_init_pata(void) -+{ -+} -+#endif -+ -+static int __init mcf5445x_init_devices(void) -+{ -+ printk(KERN_INFO "MCF5445x INIT_DEVICES\n"); -+#if 0 -+ mcf5445x_init_pata(); -+#endif -+ -+ return 0; -+} -+arch_initcall(mcf5445x_init_devices); ---- /dev/null -+++ b/arch/m68k/coldfire/mcf5445x-pci.c -@@ -0,0 +1,431 @@ -+/* -+ * arch/m68k/coldfire/mcf5445x-pci.c -+ * -+ * Coldfire M5445x specific PCI implementation. -+ * -+ * Copyright (c) 2007 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ */ -+ -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/pci.h> -+ -+#include <asm/mcfsim.h> -+#include <asm/pci.h> -+#include <asm/irq.h> -+ -+/* -+ * Layout MCF5445x to PCI memory mappings: -+ * -+ * WIN MCF5445x PCI TYPE -+ * --- -------- --- ---- -+ * [0] 0xA0000000 -> 0xA7FFFFFF 0xA0000000 -> 0xA7FFFFFF MEM -+ * [1] 0xA8000000 -> 0xABFFFFFF 0xA8000000 -> 0xABFFFFFF MEM -+ * [2] 0xAC000000 -> 0xAFFFFFFF 0xAC000000 -> 0xAFFFFFFF IO -+ */ -+ -+#define MCF5445X_PCI_MEM_BASE 0xA0000000 -+#define MCF5445X_PCI_MEM_SIZE 0x0C000000 -+ -+#define MCF5445X_PCI_CONFIG_BASE 0xAC000000 -+#define MCF5445X_PCI_CONFIG_SIZE 0x04000000 -+ -+#define MCF5445X_PCI_IO_BASE 0xAC000000 -+#define MCF5445X_PCI_IO_SIZE 0x04000000 -+ -+/* PCI Bus memory resource block */ -+struct resource pci_iomem_resource = { -+ .name = "PCI memory space", -+ .start = MCF5445X_PCI_MEM_BASE, -+ .flags = IORESOURCE_MEM, -+ .end = MCF5445X_PCI_MEM_BASE + MCF5445X_PCI_MEM_SIZE - 1 -+}; -+ -+/* PCI Bus ioport resource block */ -+struct resource pci_ioport_resource = { -+ .name = "PCI I/O space", -+ .start = MCF5445X_PCI_IO_BASE, -+ .flags = IORESOURCE_IO, -+ .end = MCF5445X_PCI_IO_BASE + MCF5445X_PCI_IO_SIZE - 1 -+}; -+ -+/* -+ * The M54455EVB multiplexes all the PCI interrupts via -+ * the FPGA and routes them to a single interrupt. The -+ * PCI spec requires all PCI interrupt routines be smart -+ * enough to sort out their own interrupts. -+ * The interrupt source from the FPGA is configured -+ * to EPORT 3. -+ */ -+#define MCF5445X_PCI_IRQ 0x43 -+ -+#define PCI_SLOTS 4 -+ -+/* -+ * FPGA Info -+ */ -+#define FPGA_PCI_IRQ_ENABLE (u32 *)0x09000000 -+#define FPGA_PCI_IRQ_STATUS (u32 *)0x09000004 -+#define FPGA_PCI_IRQ_ROUTE (u32 *)0x0900000c -+#define FPGA_SEVEN_LED (u32 *)0x09000014 -+ -+extern void set_fpga(u32 *addr, u32 val); -+ -+#ifdef DEBUG -+void mcf5445x_pci_dumpregs(void); -+#endif -+ -+/* -+ * mcf5445x_conf_device(struct pci_dev *dev) -+ * -+ * Machine dependent Configure the given device. -+ * -+ * Parameters: -+ * -+ * dev - the pci device. -+ */ -+void -+mcf5445x_conf_device(struct pci_dev *dev) -+{ -+ set_fpga(FPGA_PCI_IRQ_ENABLE, 0x0f); -+} -+ -+/* -+ * int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus, -+ * unsigned int devfn, int reg, -+ * u32 *value) -+ * -+ * Read from PCI configuration space. -+ * -+ */ -+int mcf5445x_pci_config_read(unsigned int seg, unsigned int bus, -+ unsigned int devfn, int reg, int len, u32 *value) -+{ -+ u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) | -+ MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) | -+ MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) | -+ MCF_PCI_PCICAR_DWORD(reg) | -+ MCF_PCI_PCICAR_E; -+ -+ if ((bus > 255) || (devfn > 255) || (reg > 255)) { -+ *value = -1; -+ return -EINVAL; -+ } -+ -+ /* setup for config mode */ -+ MCF_PCI_PCICAR = addr; -+ __asm__ __volatile__("nop"); -+ -+ switch (len) { -+ case 1: -+ *value = *(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3)); -+ break; -+ case 2: -+ *value = le16_to_cpu(*(volatile u16 *) -+ (MCF5445X_PCI_CONFIG_BASE + (reg&2))); -+ break; -+ case 4: -+ *value = le32_to_cpu(*(volatile u32 *) -+ (MCF5445X_PCI_CONFIG_BASE)); -+ break; -+ } -+ -+ /* clear config mode */ -+ MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E; -+ __asm__ __volatile__("nop"); -+ -+ return 0; -+} -+ -+/* -+ * int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus, -+ * unsigned int devfn, int reg, -+ * u32 *value) -+ * -+ * Write to PCI configuration space -+ */ -+int mcf5445x_pci_config_write(unsigned int seg, unsigned int bus, -+ unsigned int devfn, int reg, int len, u32 value) -+{ -+ u32 addr = MCF_PCI_PCICAR_BUSNUM(bus) | -+ MCF_PCI_PCICAR_DEVNUM(PCI_SLOT(devfn)) | -+ MCF_PCI_PCICAR_FUNCNUM(PCI_FUNC(devfn)) | -+ MCF_PCI_PCICAR_DWORD(reg) | -+ MCF_PCI_PCICAR_E; -+ -+ if ((bus > 255) || (devfn > 255) || (reg > 255)) -+ return -EINVAL; -+ -+ /* setup for config mode */ -+ MCF_PCI_PCICAR = addr; -+ __asm__ __volatile__("nop"); -+ -+ switch (len) { -+ case 1: -+ *(volatile u8 *)(MCF5445X_PCI_CONFIG_BASE+(reg&3)) = (u8)value; -+ break; -+ case 2: -+ *(volatile u16 *)(MCF5445X_PCI_CONFIG_BASE+(reg&2)) = -+ cpu_to_le16((u16)value); -+ break; -+ case 4: -+ *(volatile u32 *)(MCF5445X_PCI_CONFIG_BASE) = -+ cpu_to_le32(value); -+ break; -+ } -+ -+ /* clear config mode */ -+ MCF_PCI_PCICAR = ~MCF_PCI_PCICAR_E; -+ __asm__ __volatile__("nop"); -+ -+ return 0; -+} -+ -+/* hardware operations */ -+static struct pci_raw_ops mcf5445x_pci_ops = { -+ .read = mcf5445x_pci_config_read, -+ .write = mcf5445x_pci_config_write, -+}; -+ -+/* -+ * irqreturn_t mcf5445x_pci_interrupt( int irq, void *dev) -+ * -+ * PCI controller interrupt handler. -+ */ -+static irqreturn_t -+mcf5445x_pci_interrupt(int irq, void *dev) -+{ -+ u32 status = MCF_PCI_PCIGSCR; -+#ifdef DEBUG -+ printk(KERN_INFO "PCI: Controller irq status=0x%08x\n", status); -+#endif -+ /* clear */ -+ MCF_PCI_PCIGSCR = status; -+ -+ return IRQ_HANDLED; -+} -+ -+/* -+ * irqreturn_t mcf5445x_pci_arb_interrupt( int irq, void *dev) -+ * -+ * PCI Arbiter interrupt handler. -+ */ -+static irqreturn_t -+mcf5445x_pci_arb_interrupt(int irq, void *dev) -+{ -+ u32 status = MCF_PCIARB_PASR; -+#ifdef DEBUG -+ printk(KERN_INFO "PCI: Arbiter irq status=0x%08x\n", status); -+#endif -+ /* clear */ -+ MCF_PCIARB_PASR = status; -+ return IRQ_HANDLED; -+} -+ -+/* -+ * struct pci_bus_info *init_mcf5445x_pci(void) -+ * -+ * Machine specific initialisation: -+ * -+ * - Allocate and initialise a 'pci_bus_info' structure -+ * - Initialize hardware -+ * -+ * Result: pointer to 'pci_bus_info' structure. -+ */ -+int __init -+init_mcf5445x_pci(void) -+{ -+ return 0; -+#if 0 -+ /* -+ * Initialize the PCI core -+ */ -+ -+ /* arbitration controller */ -+ MCF_PCIARB_PACR = MCF_PCIARB_PACR_INTMPRI | -+ MCF_PCIARB_PACR_EXTMPRI(0x0f) | -+ MCF_PCIARB_PACR_INTMINTEN | -+ MCF_PCIARB_PACR_EXTMINTEN(0x0f); -+ -+ /* pci pin assignment regs */ -+ MCF_GPIO_PAR_PCI = MCF_GPIO_PAR_PCI_GNT0 | -+ MCF_GPIO_PAR_PCI_GNT1 | -+ MCF_GPIO_PAR_PCI_GNT2 | -+ MCF_GPIO_PAR_PCI_GNT3_GNT3 | -+ MCF_GPIO_PAR_PCI_REQ0 | -+ MCF_GPIO_PAR_PCI_REQ1 | -+ MCF_GPIO_PAR_PCI_REQ2 | -+ MCF_GPIO_PAR_PCI_REQ3_REQ3; -+ -+ /* target control reg */ -+ MCF_PCI_PCITCR = MCF_PCI_PCITCR_P | -+ MCF_PCI_PCITCR_WCT(8); -+ -+ /* PCI MEM address */ -+ MCF_PCI_PCIIW0BTAR = 0xA007A000; -+ -+ /* PCI MEM address */ -+ MCF_PCI_PCIIW1BTAR = 0xA803A800; -+ -+ /* PCI IO address */ -+ MCF_PCI_PCIIW2BTAR = 0xAC03AC00; -+ -+ /* window control */ -+ MCF_PCI_PCIIWCR = MCF_PCI_PCIIWCR_WINCTRL0_ENABLE | -+ MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD | -+ MCF_PCI_PCIIWCR_WINCTRL1_ENABLE | -+ MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD | -+ MCF_PCI_PCIIWCR_WINCTRL2_ENABLE | -+ MCF_PCI_PCIIWCR_WINCTRL2_IO; -+ -+ /* initiator control reg */ -+ MCF_PCI_PCIICR = 0x00ff; -+ -+ /* type 0 - command */ -+ MCF_PCI_PCISCR = MCF_PCI_PCISCR_MW | /* mem write/inval */ -+ MCF_PCI_PCISCR_B | /* bus master enable */ -+ MCF_PCI_PCISCR_M; /* mem access enable */ -+ -+ /* type 0 - config reg */ -+ MCF_PCI_PCICR1 = MCF_PCI_PCICR1_CACHELINESIZE(8) | -+ MCF_PCI_PCICR1_LATTIMER(0xff); -+ -+ /* type 0 - config 2 reg */ -+ MCF_PCI_PCICR2 = 0; -+ -+ /* target control reg */ -+ MCF_PCI_PCITCR2 = MCF_PCI_PCITCR2_B0E | -+ MCF_PCI_PCITCR2_B4E; -+ -+ /* translate addresses from PCI[0] to CF[SDRAM] */ -+ MCF_PCI_PCITBATR0 = MCF_RAMBAR1 | MCF_PCI_PCITBATR0_EN; -+ MCF_PCI_PCITBATR4 = MCF_RAMBAR1 | MCF_PCI_PCITBATR4_EN; -+ -+ /* setup controller interrupt handlers */ -+ if (request_irq(55+128, mcf5445x_pci_interrupt, IRQF_SHARED, -+ "PCI Controller", NULL)) -+ printk(KERN_ERR "PCI: Unable to register controller irq\n"); -+ -+ if (request_irq (56+128, mcf5445x_pci_arb_interrupt, IRQF_SHARED, "PCI Arbiter", NULL)) -+ printk(KERN_ERR "PCI: Unable to register arbiter irq\n"); -+ -+ /* global control - clear reset bit */ -+ MCF_PCI_PCIGSCR = MCF_PCI_PCIGSCR_SEE | -+ MCF_PCI_PCIGSCR_PEE; -+ -+ /* let everything settle */ -+ udelay(1000); -+ -+ /* allocate bus ioport resource */ -+ if (request_resource(&ioport_resource, &pci_ioport_resource) < 0) -+ printk(KERN_ERR "PCI: Unable to alloc ioport resource\n"); -+ -+ /* allocate bus iomem resource */ -+ if (request_resource(&iomem_resource, &pci_iomem_resource) < 0) -+ printk(KERN_ERR "PCI: Unable to alloc iomem resource\n"); -+ -+ /* setup FPGA to route PCI to IRQ3(67), SW7 to IRQ7, SW6 to IRQ4 */ -+ set_fpga(FPGA_PCI_IRQ_ENABLE, 0x00000000); -+ set_fpga(FPGA_PCI_IRQ_ROUTE, 0x00000039); -+ set_fpga(FPGA_SEVEN_LED, 0x000000FF); -+ -+ raw_pci_ops = &mcf5445x_pci_ops; -+ -+ return 0; -+#endif -+} -+ -+/* -+ * DEBUGGING -+ */ -+ -+#ifdef DEBUG -+struct regdump { -+ u32 addr; -+ char regname[16]; -+}; -+ -+struct regdump type0regs[] = { -+ { 0xfc0a8000, "PCIIDR" }, -+ { 0xfc0a8004, "PCISCR" }, -+ { 0xfc0a8008, "PCICCRIR" }, -+ { 0xfc0a800c, "PCICR1" }, -+ { 0xfc0a8010, "PCIBAR0" }, -+ { 0xfc0a8014, "PCIBAR1" }, -+ { 0xfc0a8018, "PCIBAR2" }, -+ { 0xfc0a801c, "PCIBAR3" }, -+ { 0xfc0a8020, "PCIBAR4" }, -+ { 0xfc0a8024, "PCIBAR5" }, -+ { 0xfc0a8028, "PCICCPR" }, -+ { 0xfc0a802c, "PCISID" }, -+ { 0xfc0a8030, "PCIERBAR" }, -+ { 0xfc0a8034, "PCICPR" }, -+ { 0xfc0a803c, "PCICR2" }, -+ { 0, "" } -+}; -+ -+struct regdump genregs[] = { -+ { 0xfc0a8060, "PCIGSCR" }, -+ { 0xfc0a8064, "PCITBATR0" }, -+ { 0xfc0a8068, "PCITBATR1" }, -+ { 0xfc0a806c, "PCITCR1" }, -+ { 0xfc0a8070, "PCIIW0BTAR" }, -+ { 0xfc0a8074, "PCIIW1BTAR" }, -+ { 0xfc0a8078, "PCIIW2BTAR" }, -+ { 0xfc0a8080, "PCIIWCR" }, -+ { 0xfc0a8084, "PCIICR" }, -+ { 0xfc0a8088, "PCIISR" }, -+ { 0xfc0a808c, "PCITCR2" }, -+ { 0xfc0a8090, "PCITBATR0" }, -+ { 0xfc0a8094, "PCITBATR1" }, -+ { 0xfc0a8098, "PCITBATR2" }, -+ { 0xfc0a809c, "PCITBATR3" }, -+ { 0xfc0a80a0, "PCITBATR4" }, -+ { 0xfc0a80a4, "PCITBATR5" }, -+ { 0xfc0a80a8, "PCIINTR" }, -+ { 0xfc0a80f8, "PCICAR" }, -+ { 0, "" } -+}; -+ -+struct regdump arbregs[] = { -+ { 0xfc0ac000, "PACR" }, -+ { 0xfc0ac004, "PASR" }, /* documentation error */ -+ { 0, "" } -+}; -+ -+/* -+ * void mcf5445x_pci_dumpregs() -+ * -+ * Dump out all the PCI registers -+ */ -+void -+mcf5445x_pci_dumpregs(void) -+{ -+ struct regdump *reg; -+ -+ printk(KERN_INFO "*** MCF5445x PCI TARGET 0 REGISTERS ***\n"); -+ -+ reg = type0regs; -+ while (reg->addr) { -+ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr, -+ *((u32 *)reg->addr), reg->regname); -+ reg++; -+ } -+ -+ printk(KERN_INFO "\n*** MCF5445x PCI GENERAL REGISTERS ***\n"); -+ reg = genregs; -+ while (reg->addr) { -+ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr, -+ *((u32 *)reg->addr), reg->regname); -+ reg++; -+ } -+ printk(KERN_INFO "\n*** MCF5445x PCI ARBITER REGISTERS ***\n"); -+ reg = arbregs; -+ while (reg->addr) { -+ printk(KERN_INFO "0x%08x 0x%08x %s\n", reg->addr, -+ *((u32 *)reg->addr), reg->regname); -+ reg++; -+ } -+} -+#endif /* DEBUG */ ---- /dev/null -+++ b/arch/m68k/coldfire/mcf548x-devices.c -@@ -0,0 +1,94 @@ -+/* -+ * arch/m68k/coldfire/mcf5445x-devices.c -+ * -+ * Coldfire M5445x Platform Device Configuration -+ * -+ * Based on the Freescale MXC devices.c -+ * -+ * Copyright (c) 2007 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ */ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/mtd/physmap.h> -+#include <linux/platform_device.h> -+#include <linux/fsl_devices.h> -+ -+#include <asm/coldfire.h> -+#include <asm/mcfsim.h> -+ -+static struct resource coldfire_i2c_resources[] = { -+ [0] = { /* I/O */ -+ .start = MCF_MBAR + 0x008F00, -+ .end = MCF_MBAR + 0x008F20, -+ .flags = IORESOURCE_MEM, -+ }, -+ [2] = { /* IRQ */ -+ .start = 40, -+ .end = 40, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device coldfire_i2c_device = { -+ .name = "MCF548X-i2c", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(coldfire_i2c_resources), -+ .resource = coldfire_i2c_resources, -+}; -+ -+static struct resource coldfire_sec_resources[] = { -+ [0] = { /* I/O */ -+ .start = MCF_MBAR + 0x00020000, -+ .end = MCF_MBAR + 0x00033000, -+ .flags = IORESOURCE_MEM, -+ }, -+ [2] = { /* IRQ */ -+ .start = ISC_SEC, -+ .end = ISC_SEC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device coldfire_sec_device = { -+ .name = "fsl-sec1", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(coldfire_sec_resources), -+ .resource = coldfire_sec_resources, -+}; -+ -+#if defined(CONFIG_MTD_PHYSMAP) -+static struct physmap_flash_data mcf5485_flash_data = { -+ .width = 2, -+}; -+ -+static struct resource mcf5485_flash_resource = { -+ .start = 0xf8000000, -+ .end = 0xf80fffff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device mcf5485_flash_device = { -+ .name = "physmap-flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &mcf5485_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &mcf5485_flash_resource, -+}; -+#endif -+ -+static int __init mcf5485_init_devices(void) -+{ -+ printk(KERN_INFO "MCF5485x INIT_DEVICES\n"); -+ -+ platform_device_register(&coldfire_i2c_device); -+ platform_device_register(&coldfire_sec_device); -+/*#if defined(CONFIG_MTD_PHYSMAP) -+ platform_device_register(&mcf5485_flash_device); -+#endif*/ -+ return 0; -+} -+arch_initcall(mcf5485_init_devices); ---- /dev/null -+++ b/arch/m68k/coldfire/mcf548x-pci.c -@@ -0,0 +1,959 @@ -+/* -+ * ColdFire 547x/548x PCI Host Controller functions -+ * -+ * Copyright (c) 2005-2008 Freescale Semiconductor, Inc. -+ * -+ * This code is based on the 2.6.10 version of pci.c -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/string.h> -+#include <linux/pci.h> -+#include <linux/ioport.h> -+#include <linux/slab.h> -+#include <linux/version.h> -+#include <linux/interrupt.h> -+ -+#include <linux/dma-mapping.h> -+#include <asm/coldfire.h> -+#include <asm/io.h> -+#include <asm/m5485sim.h> -+#include <asm/m5485pci.h> -+#include <asm/irq.h> -+#include <asm/pci.h> -+#include <asm/virtconvert.h> -+ -+ -+#undef DEBUG -+//#define DEBUG -+ -+#ifdef DEBUG -+//#define DBG(x...) printk(KERN_DEBUG x) -+#define DBG(x...) printk(x) -+#else -+#define DBG(x...) -+#endif -+ -+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,75)) -+# define irqreturn_t void -+# define IRQ_HANDLED -+# define IRQ_NONE -+#endif -+ -+/* -+ * Bridge configration dafaults -+ */ -+#define PCI_RETRIES 0 -+#define PCI_CACHE_LINE 8 -+#define PCI_MINGNT 1 -+#define PCI_MAXLAT 42 -+ -+ -+/* -+ * Initiator windows setting -+ */ -+#define HOST_MEM_BASE 0xD0000000 /* ColdFire Memory window base */ -+#define PCI_MEM_BASE 0xD0000000 /* PCI Memory window base */ -+#define PCI_MEM_SIZE 0x08000000 /* Memory window size (128M) */ -+#define HOST_IO_BASE 0xD8000000 /* ColdFire I/O window base */ -+#define PCI_IO_BASE_ADDR 0x00000000 /* PCI I/O window base */ -+#define PCI_IO_SIZE 0x00010000 /* I/O window size (64K) */ -+#define HOST_CFG_BASE 0xD8000000 /* ColdFire config window base */ -+#define HOST_DMA_BASE CONFIG_SDRAM_BASE /* ColdFire PCI-DMA window base */ -+#define PCI_HDR_BASE (MCF_MBAR+0xB00)/* ColdFire config registers */ -+ -+#define PCI_MEM_MASK (PCI_MEM_SIZE-1) -+#define PCI_IO_MASK (PCI_IO_SIZE-1) -+ -+/* Macro to set initiator window */ -+#define WxBAR(host_address, pci_address, size) \ -+ (((host_address) & 0xff000000) | \ -+ ((((size)-1) & 0xff000000) >> 8) | \ -+ ((pci_address) & 0xff000000) >> 16) -+ -+/* -+ * BIOS internal data -+ */ -+static u8 revision; /* controller revision */ -+ -+/* -+ * Board specific setting -+ */ -+const unsigned int irq_lines[] = { 5, 7 }; -+ -+#define N_SLOTS (sizeof(board_info) / sizeof(board_info[0])) -+#define N_IRQS (sizeof(irq_lines) / sizeof(irq_lines[0])) -+#define BRIDGE_SLOT 0 -+ -+const struct slotinfo { -+ unsigned char idsel; /* device number */ -+ unsigned char irq; /* external IRQ */ -+ unsigned char req; /* REQ line number */ -+ unsigned char gnt; /* GNT line number */ -+} board_info[] = { -+ {0, 0, 0, 0}, /* Bridge */ -+ {17, 5, 1, 1}, /* Slot #1 */ -+ {18, 5, 2, 2}, /* Slot #2 */ -+ {20, 7, 3, 3}, /* Slot #3 */ -+ {21, 7, 4, 4}, /* Slot #4 */ -+}; -+ -+/************************************************************************/ -+ -+/* -+ * static int mk_conf_addr() -+ * -+ * Return type0 or type1 configuration address -+ * by the means of device address and PCI dword location -+ * 0 - for not existing slots -+ */ -+static int mk_conf_addr(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where) -+{ -+ int slot, func, address, idsel, dev_fn; -+ -+ if (bus->number) { -+ address = MCF_PCICAR_E | (bus->number << 16) | -+ (devfn << 8) | (where & 0xfc); -+ } else { -+ slot = PCI_SLOT(devfn); -+ if (slot > N_SLOTS || slot == BRIDGE_SLOT) -+ return 0; -+ else { -+ func = PCI_FUNC(devfn); -+ idsel = board_info[slot].idsel; -+ -+ dev_fn = PCI_DEVFN(idsel, func); -+ address = MCF_PCICAR_E | (bus->number << 16) | -+ (dev_fn << 8) | (where & 0xfc); -+ } -+ } -+ -+ return (address); -+} -+ -+/* -+ * static int read_config_byte() -+ * -+ * Read a byte from configuration space of specified device -+ */ -+static int read_config_byte(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u8 *value) -+{ -+ int slot; -+ int address; -+ int result; -+ -+ *value = 0xff; -+ result = PCIBIOS_SUCCESSFUL; -+ -+ slot = PCI_SLOT(devfn); -+ if (slot == BRIDGE_SLOT) { -+ if (where <= 0x40) -+ *value = *(volatile u8 *) (PCI_HDR_BASE + (where ^ 3)); -+ else -+ *value = 0; -+ } else { -+ address = mk_conf_addr(bus, devfn, where); -+ if (!address) -+ result = PCIBIOS_DEVICE_NOT_FOUND; -+ else { -+ MCF_PCICAR = address; -+ *value = *(volatile u8 *) (HOST_CFG_BASE + (where & 3)); -+ } -+ } -+ __asm__ __volatile__("nop"); -+ __asm__ __volatile__("nop"); -+ MCF_PCICAR &= ~MCF_PCICAR_E; -+ -+ DBG("PCI: read_config_byte bus=%d, devfn=%d, addr=0x%02X, val=0x%02X, ret=%02X\n", -+ bus->number, devfn, where, *value, result); -+ -+ return (result); -+} -+ -+/* -+ * static int read_config_word() -+ * -+ * Read a word from configuration space of specified device -+ */ -+static int read_config_word(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u16 *value) -+{ -+ int slot; -+ int address; -+ int result; -+ -+ *value = 0xffff; -+ result = PCIBIOS_SUCCESSFUL; -+ -+ if (where & 0x1) -+ result = PCIBIOS_BAD_REGISTER_NUMBER; -+ else { -+ slot = PCI_SLOT(devfn); -+ if (slot == BRIDGE_SLOT) { -+ if (where <= 0x3f) -+ *value = -+ *(volatile u16 *) (PCI_HDR_BASE + -+ (where ^ 2)); -+ else -+ *value = 0; -+ } else { -+ address = mk_conf_addr(bus, devfn, where); -+ if (!address) -+ result = PCIBIOS_DEVICE_NOT_FOUND; -+ else { -+ MCF_PCICAR = address; -+ *value = le16_to_cpu(*(volatile u16 *) -+ (HOST_CFG_BASE + -+ (where & 2))); -+ } -+ } -+ } -+ __asm__ __volatile__("nop"); -+ __asm__ __volatile__("nop"); -+ MCF_PCICAR &= ~MCF_PCICAR_E; -+ -+ DBG("PCI: read_config_word bus=%d, devfn=%d, addr=0x%02X, val=0x%04X ret=%02X\n", -+ bus->number, devfn, where, *value, result); -+ -+ return (result); -+} -+ -+/* -+ * static int read_config_dword() -+ * -+ * Read a long word from configuration space of specified device -+ */ -+static int read_config_dword(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u32 *value) -+{ -+ int slot; -+ int address; -+ int result; -+ -+ *value = 0xffffffff; -+ result = PCIBIOS_SUCCESSFUL; -+ -+ if (where & 0x3) -+ result = PCIBIOS_BAD_REGISTER_NUMBER; -+ else { -+ slot = PCI_SLOT(devfn); -+ if (slot == BRIDGE_SLOT) { -+ if (where <= 0x3d) -+ *value = -+ *(volatile u32 *) (PCI_HDR_BASE + where); -+ else -+ *value = 0; -+ __asm__ __volatile__("nop"); -+ __asm__ __volatile__("nop"); -+ } else { -+ address = mk_conf_addr(bus, devfn, where); -+ if (!address) -+ result = PCIBIOS_DEVICE_NOT_FOUND; -+ else { -+ MCF_PCICAR = address; -+ *value = le32_to_cpu(*(volatile u32 *) -+ (HOST_CFG_BASE)); -+ __asm__ __volatile__("nop"); -+ __asm__ __volatile__("nop"); -+ if (bus->number != 0 && revision < 1) { -+ volatile u32 temp; -+ -+ MCF_PCICAR |= 0xff0000; -+ temp = *(volatile u32 *) (HOST_CFG_BASE); -+ } -+ } -+ } -+ } -+ -+ MCF_PCICAR &= ~MCF_PCICAR_E; -+ -+ DBG("PCI: read_config_dword bus=%d, devfn=%d, addr=0x%02X, value=0x%08X ret=%02X\n", -+ bus->number, devfn, where, *value, result); -+ -+ return (result); -+} -+ -+/* -+ * static int write_config_byte() -+ * -+ * Write a byte to configuration space of specified device -+ */ -+static int write_config_byte(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u8 value) -+{ -+ int slot; -+ int address; -+ int result; -+ -+ result = PCIBIOS_SUCCESSFUL; -+ -+ slot = PCI_SLOT(devfn); -+ if (slot == BRIDGE_SLOT) { -+ if (where <= 0x40) -+ *(volatile u8 *) (PCI_HDR_BASE + (where ^ 3)) = value; -+ } else { -+ address = mk_conf_addr(bus, devfn, where); -+ if (!address) -+ result = PCIBIOS_DEVICE_NOT_FOUND; -+ else { -+ MCF_PCICAR = address; -+ *(volatile u8 *) (HOST_CFG_BASE + (where & 3)) = value; -+ } -+ } -+ __asm__ __volatile__("nop"); -+ __asm__ __volatile__("nop"); -+ MCF_PCICAR &= ~MCF_PCICAR_E; -+ -+ DBG("PCI: write_config_byte bus=%d, devfn=%d, addr=0x%02X, value=0x%02X ret=%02X\n", -+ bus->number, devfn, where, value, result); -+ -+ return (result); -+} -+ -+/* -+ * static int write_config_word() -+ * -+ * Write a word to configuration space of specified device -+ */ -+static int write_config_word(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u16 value) -+{ -+ int slot; -+ int address; -+ int result; -+ -+ result = PCIBIOS_SUCCESSFUL; -+ -+ if (where & 0x1) -+ result = PCIBIOS_BAD_REGISTER_NUMBER; -+ else { -+ slot = PCI_SLOT(devfn); -+ if (slot == BRIDGE_SLOT) { -+ if (where <= 0x3f) -+ *(volatile u16 *) (PCI_HDR_BASE + (where ^ 2)) = -+ value; -+ } else { -+ address = mk_conf_addr(bus, devfn, where); -+ if (!address) -+ result = PCIBIOS_DEVICE_NOT_FOUND; -+ else { -+ MCF_PCICAR = address; -+ *(volatile u16 *) (HOST_CFG_BASE + (where & 2)) = -+ cpu_to_le16(value); -+ } -+ } -+ } -+ __asm__ __volatile__("nop"); -+ __asm__ __volatile__("nop"); -+ MCF_PCICAR &= ~MCF_PCICAR_E; -+ -+ DBG("PCI: write_config_word bus=%d, devfn=%d, addr=0x%02X, value=0x%04X ret=%02X\n", -+ bus->number, devfn, where, value, result); -+ -+ return (result); -+} -+ -+/* -+ * static int write_config_dword() -+ * -+ * Write a long word to configuration space of specified device -+ */ -+static int write_config_dword(/*struct pci_dev *dev*/struct pci_bus *bus, unsigned int devfn, int where, u32 value) -+{ -+ int slot; -+ int address; -+ int result; -+ -+ result = PCIBIOS_SUCCESSFUL; -+ -+ if (where & 0x3) -+ result = PCIBIOS_BAD_REGISTER_NUMBER; -+ else { -+ slot = PCI_SLOT(devfn); -+ if (slot == BRIDGE_SLOT) { -+ if (where <= 0x3d) -+ *(volatile u32 *) (PCI_HDR_BASE + where) = -+ value; -+ } else { -+ address = mk_conf_addr(bus, devfn, where); -+ if (!address) -+ result = PCIBIOS_DEVICE_NOT_FOUND; -+ else { -+ MCF_PCICAR = address; -+ *(volatile u32 *) (HOST_CFG_BASE) = -+ cpu_to_le32(value); -+ } -+ } -+ } -+ __asm__ __volatile__("nop"); -+ __asm__ __volatile__("nop"); -+ MCF_PCICAR &= ~MCF_PCICAR_E; -+ -+ DBG("PCI: write_config_dword dev=%d, fn=%d, addr=0x%02X, value=0x%08X ret=%02X\n", -+ PCI_SLOT(devfn), PCI_FUNC(devfn), where, value, result); -+ -+ return (result); -+} -+ -+static int config_read(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 * val) -+{ -+ switch (size) { -+ case 1: -+ return read_config_byte(bus, devfn, where, (u8 *) val); -+ case 2: -+ return read_config_word(bus, devfn, where, (u16 *) val); -+ default: -+ return read_config_dword(bus, devfn, where, val); -+ } -+} -+ -+static int config_write(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 val) -+{ -+ switch (size) { -+ case 1: -+ return write_config_byte(bus, devfn, where, (u8) val); -+ case 2: -+ return write_config_word(bus, devfn, where, (u16) val); -+ default: -+ return write_config_dword(bus, devfn, where, val); -+ } -+} -+ -+/* -+ * configuration routines entry points -+ */ -+static struct pci_ops bus_ops = { -+ read: config_read, -+ write: config_write -+}; -+ -+/************************************************************************/ -+ -+/* -+ * u8 pci_inb() -+ * -+ * Read a byte at specified address from I/O space -+ */ -+unsigned char pci_inb(long addr) -+{ -+ char value; -+ -+ value = *(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ DBG("PCI: inb addr=0x%08X, value=0x%02X\n", addr, value); -+ -+ return (unsigned char) value; -+} -+ -+ -+/* -+ * u16 pci_inw() -+ * -+ * Read a word at specified address from I/O space -+ */ -+unsigned short pci_inw(long addr) -+{ -+ short value; -+ volatile unsigned short *ptr; -+ -+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ value = le16_to_cpu(*ptr); -+ -+ DBG("PCI: inw addr=0x%08X, value=0x%04X\n", addr, value); -+ return (unsigned short) value; -+} -+ -+/* -+ * u16 pci_raw_inw() -+ * -+ * Read a raw word at specified address from I/O space -+ */ -+unsigned short pci_raw_inw(long addr) -+{ -+ short value; -+ volatile unsigned short *ptr; -+ -+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ value = *ptr; -+ -+ DBG("PCI: raw_inw addr=0x%08X, value=0x%04X\n", addr, value); -+ return (unsigned short) value; -+} -+ -+/* -+ * u32 pci_inl() -+ * -+ * Read a dword at specified address from I/O space -+ */ -+unsigned long pci_inl(long addr) -+{ -+ long value; -+ volatile unsigned long *ptr; -+ -+ ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ value = le32_to_cpu(*ptr); -+ -+ DBG("PCI: inl addr=0x%08X, value=0x%08X\n", addr, value); -+ return (unsigned long) value; -+} -+ -+/* -+ * u32 pci_raw_inl() -+ * -+ * Read a raw dword at specified address from I/O space -+ */ -+unsigned long pci_raw_inl(long addr) -+{ -+ long value; -+ volatile unsigned long *ptr; -+ -+ ptr = (volatile unsigned long *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ value = *ptr; -+ -+ DBG("PCI: raw_inl addr=0x%08X, value=0x%08X\n", addr, value); -+ return (unsigned long) value; -+} -+ -+/* -+ * void pci_outb() -+ * -+ * Write a byte value at specified address to I/O space -+ */ -+void pci_outb( unsigned char value, long addr) -+{ -+ -+ *(volatile unsigned char *) (HOST_IO_BASE | (addr & PCI_IO_MASK)) = value; -+ DBG("PCI: outb addr=0x%08X, value=0x%02X\n", addr, value); -+} -+ -+ -+/* -+ * void pci_outw() -+ * -+ * Write a word value at specified address to I/O space -+ */ -+void pci_outw(volatile unsigned short value, volatile long addr) -+{ -+ volatile unsigned short *ptr; -+ -+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ *ptr = cpu_to_le16(value); -+ DBG("PCI: outw addr=0x%08X, value=0x%04X\n", addr, value); -+} -+ -+/* -+ * void pci_raw_outw() -+ * -+ * Write a raw word value at specified address to I/O space -+ */ -+void pci_raw_outw(volatile unsigned short value, volatile long addr) -+{ -+ volatile unsigned short *ptr; -+ -+ ptr = (volatile unsigned short *) (HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ *ptr = value; -+ DBG("PCI: raw_outw addr=0x%08X, value=0x%04X\n", addr, value); -+} -+ -+/* -+ * void pci_outl() -+ * -+ * Write a long word value at specified address to I/O space -+ */ -+void pci_outl(volatile unsigned long value, volatile long addr) -+{ -+ volatile unsigned long *ptr; -+ -+ ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ *ptr = cpu_to_le32(value); -+ DBG("PCI: outl addr=0x%08X, value=0x%08X\n", addr, value); -+} -+ -+/* -+ * void pci_raw_outl() -+ * -+ * Write a raw long word value at specified address to I/O space -+ */ -+void pci_raw_outl(volatile unsigned long value, volatile long addr) -+{ -+ volatile unsigned long *ptr; -+ -+ ptr = (volatile unsigned long *)(HOST_IO_BASE | (addr & PCI_IO_MASK)); -+ *ptr = value; -+ DBG("PCI: raw_outl addr=0x%08X, value=0x%08X\n", addr, value); -+} -+ -+/* -+ * void pci_insb() -+ * -+ * Read several byte values from specified I/O port -+ */ -+void pci_insb(volatile unsigned char *addr, unsigned char *buf, int len) -+{ -+ for (; len--; buf++) -+ *buf = pci_inb((unsigned long)addr); -+ DBG("PCI: pci_insb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); -+} -+ -+ -+/* -+ * void pci_insw() -+ * -+ * Read several word values from specified I/O port -+ */ -+void pci_insw(volatile unsigned short *addr, unsigned short *buf, int len) -+{ -+ for (; len--; buf++) -+ *buf = pci_inw((unsigned long)addr); -+ DBG("PCI: pci_insw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); -+} -+ -+/* -+ * void pci_insl() -+ * -+ * Read several dword values from specified I/O port -+ */ -+void pci_insl(volatile unsigned long *addr, unsigned long *buf, int len) -+{ -+ for (; len--; buf++) -+ *buf = pci_inl((unsigned long)addr); -+ DBG("PCI: pci_insl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); -+} -+ -+/* -+ * void pci_outsb() -+ * -+ * Write several byte values to specified I/O port -+ */ -+void pci_outsb(volatile unsigned char *addr, const unsigned char *buf, int len) -+{ -+ for (; len--; buf++) -+ pci_outb((unsigned long)addr, *buf); -+ DBG("PCI: pci_outsb addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); -+} -+ -+/* -+ * void pci_outsw() -+ * -+ * Write several word values to specified I/O port -+ */ -+void pci_outsw(volatile unsigned short *addr, const unsigned short *buf, int len) -+{ -+ for (; len--; buf++) -+ pci_outw((unsigned long)addr, *buf); -+ DBG("PCI: pci_outsw addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); -+} -+ -+/* -+ * void pci_outsl() -+ * -+ * Write several dword values to specified I/O port -+ */ -+void pci_outsl(volatile unsigned long *addr, const unsigned long *buf, int len) -+{ -+ for (; len--; buf++) -+ pci_outl((unsigned long)addr, *buf); -+ DBG("PCI: pci_outsl addr=0x%08X, buf=%p, len=%d\n", addr, buf, len); -+} -+ -+/* -+ * void pci_xlb_handler() -+ * -+ * PCI XLB interrupt handler -+ */ -+irqreturn_t xlb_interrupt(int irq, void *dev) -+{ -+ volatile int xlb_error = MCF_PCIISR; -+ -+ /* Acknowlege interrupt */ -+ MCF_PCIISR = xlb_error; -+ -+ /* Dump interrupt reason */ -+ if (xlb_error & MCF_PCIISR_RE) -+ DBG("PCI: Retry Error Received\n"); -+ -+ if (xlb_error & MCF_PCIISR_IA) -+ DBG("PCI: Initiator Abort Received\n"); -+ -+ if (xlb_error & MCF_PCIISR_TA) -+ DBG("PCI: Target Abort Received\n"); -+ -+ return IRQ_HANDLED; -+} -+ -+ -+/* -+ * void pci_arbiter_handler() -+ * -+ * PCI arbiter interrupt handler -+ */ -+irqreturn_t arb_interrupt(int irq, void *dev) -+{ -+ volatile unsigned long arb_error = MCF_PCIARB_PASR; -+ -+ /* Acknowlege interrupt */ -+ printk("%s\n",__FUNCTION__); -+ MCF_PCIARB_PASR = arb_error; -+ -+ if (arb_error & MCF_PCIARB_PASR_ITLMBK) { -+ DBG("PCI: coldfire master time-out\n"); -+ -+ /* Set infinite number of retries */ -+ MCF_PCIICR &= ~0xFF; -+ } -+ -+ if (arb_error & MCF_PCIARB_PASR_EXTMBK(0x1F)) { -+ arb_error >>= 17; -+ DBG("PCI: external master time-out (mask = 0x%X)\n", arb_error); -+ -+ /* raise arbitration priority level */ -+ MCF_PCIARB_PACR = MCF_PCIARB_PACR_EXTMPRI(arb_error); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+ -+/* -+ * void pci_eint_handler() -+ * -+ * Eport interrupt handler -+ */ -+irqreturn_t eint_handler(int irq, void *dev) -+{ -+ /* Just acknowlege interrupt and exit */ -+ MCF_EPFR = 0x1 << (irq - 64); -+ return IRQ_HANDLED; -+} -+ -+ -+/* -+ * void __init coldfire_fixup(int pci_modify) -+ * -+ * Assign IRQ numbers as used by Linux to the interrupt pins -+ * of the PCI cards. -+ */ -+static void __init coldfire_fixup(int pci_modify) -+{ -+ struct pci_dev *dev; -+ unsigned char slot, pin; -+ -+ DBG("%s\n",__FUNCTION__); -+#ifdef NL_ORIGINAL -+ pci_for_each_dev(dev) { -+#else -+ dev = NULL; -+ while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { -+#endif -+ if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) { -+ slot = PCI_SLOT(dev->devfn); -+ dev->irq = 64 + board_info[slot].irq; -+ -+ /* Check if device needs interrupt */ -+#ifdef NL_ORIGINAL -+ pcibios_read_config_byte( -+ dev->bus->number, dev->devfn, -+ PCI_INTERRUPT_PIN, &pin); -+ -+ if ( pin ) { -+ pcibios_write_config_byte( -+ dev->bus->number, dev->devfn, -+ PCI_INTERRUPT_LINE, dev->irq); -+ } -+#else -+ pci_read_config_byte(dev, -+ PCI_INTERRUPT_PIN, &pin); -+ -+ if ( pin ) { -+ pci_write_config_byte(dev, -+ PCI_INTERRUPT_LINE, dev->irq); -+ } -+#endif -+ } -+ } -+} -+ -+static void __init configure_device(struct pci_dev *dev) -+{ -+ /* TODO: This should depend from disable_pci_burst setting */ -+ DBG("%s\n",__FUNCTION__); -+#ifdef NL_ORIGINAL -+ pcibios_write_config_byte(bus, devfn, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE); -+#else -+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, PCI_CACHE_LINE); -+#endif -+} -+ -+struct pci_bus_info *__init init_coldfire_pci(void) -+{ -+ static struct pci_bus_info bus; -+ int i; -+ int pci_mem_va; -+ static char irq_name[N_IRQS][15]; -+ -+ /* Get controller revision */ -+ revision = MCF_PCICCRIR; -+ printk("ColdFire PCI Host Bridge (Rev. %d) detected:" -+ "MEMBase %x,MEMLen %x,IOBase %x,IOLen %x\n", -+ revision, HOST_MEM_BASE, PCI_MEM_SIZE - 1, 0, PCI_IO_SIZE - 1); -+ -+ /* Setup bus info structure. */ -+ memset(&bus, 0, sizeof (struct pci_bus_info)); -+ -+ /* Request intiator memory resource */ -+ bus.mem_space.start = PCI_MEM_BASE;//HOST_MEM_BASE; -+ bus.mem_space.end = bus.mem_space.start + PCI_MEM_SIZE - 1; -+ bus.mem_space.name = "PCI Bus #0"; -+ if (request_resource(&iomem_resource, &bus.mem_space) != 0) -+ { -+ printk("Failed to request bridge iomem resource\n"); -+ return NULL; -+ } -+ -+ /* Request intiator memory resource */ -+ bus.io_space.start = 0; -+ bus.io_space.end = bus.io_space.start + PCI_IO_SIZE - 1; -+ bus.io_space.name = "PCI Bus #0"; -+ if (request_resource(&ioport_resource, &bus.io_space) != 0) -+ { -+ printk("Failed to request bridge ioport resource\n"); -+ return NULL; -+ } -+ -+ /* Must Reset!!! If bootloader has PCI enabled, it will cause -+ * problem in linux when it tries to configure/find resources -+ * for the pci devices. Both registers need to be reset. -+ */ -+ MCF_PCIGSCR = 0x1; -+ MCF_PCITCR = 0x00000000; -+ -+ /* Set up the arbiter */ -+ MCF_PCIARB_PACR = 0 /*MCF_PCIARB_PACR_PKMD*/ -+ | MCF_PCIARB_PACR_INTMPRI -+ | MCF_PCIARB_PACR_INTMINTEN -+ | MCF_PCIARB_PACR_EXTMPRI(0x1F) -+ | MCF_PCIARB_PACR_EXTMINTEN(0x1F); -+ -+ /* GNT and REQ */ -+ MCF_PAR_PCIBG = 0x3FF; -+ MCF_PAR_PCIBR = 0x3FF; -+ -+ /* Enable bus mastering, memory access and MWI */ -+ MCF_PCISCR = MCF_PCISCR_B | MCF_PCISCR_M | MCF_PCISCR_MW; -+ -+ /* Setup burst parameters */ -+ MCF_PCICR1 = MCF_PCICR1_LATTIMER(32) | -+ MCF_PCICR1_CACHELINESIZE(PCI_CACHE_LINE); -+ -+ MCF_PCICR2 = 0; -+ /*MCF_PCICR2_MINGNT(PCI_MINGNT) | -+ MCF_PCICR2_MAXLAT(PCI_MAXLAT); -+ */ -+ /* Turn on error signaling */ -+ MCF_PCIICR = MCF_PCIICR_TAE | MCF_PCIICR_IAE | PCI_RETRIES; -+ MCF_PCIGSCR |= MCF_PCIGSCR_SEE; -+ /* -+ * Configure Initiator Windows -+ * Window 0: 128M PCI Memory @ HOST_MEM_BASE, 1:1 mapping -+ * Window 1: 64K I/O Memory @ HOST_IO_BASE, 1:0 mapping -+ */ -+ MCF_PCIIW0BTAR = WxBAR(HOST_MEM_BASE, PCI_MEM_BASE, PCI_MEM_SIZE); -+ MCF_PCIIW1BTAR = WxBAR(HOST_IO_BASE, PCI_IO_BASE_ADDR, PCI_IO_SIZE); -+ -+ MCF_PCIIWCR = MCF_PCIIWCR_WINCTRL1_IO | -+ MCF_PCIIWCR_WINCTRL0_MEMRDLINE; -+ -+ /* Target PCI DMA Windows */ -+ MCF_PCIBAR1 = PCI_DMA_BASE; -+ MCF_PCITBATR1 = HOST_DMA_BASE | MCF_PCITBATR1_EN; -+ MCF_PCIBAR0 = MCF_RAMBAR0;; -+ MCF_PCITBATR0 = MCF_RAMBAR0 | MCF_PCITBATR0_EN; -+ DBG("PCI TCR %x,MCF_PCIBAR1 %x,MCF_PCITBATR1 %x." -+ "MCF_PCIBAR0 %x,MCF_PCITBATR9 %x\n", MCF_PCITCR, MCF_PCIBAR1, -+ MCF_PCITBATR1, MCF_PCIBAR0, MCF_PCITBATR0); -+ /* Enable internal PCI controller interrupts */ -+ MCF_ICR(ISC_PCI_XLB) = ILP_PCI_XLB; -+ /*request_irq(64+ISC_PCI_XLB, xlb_interrupt, -+ SA_INTERRUPT, "PCI XL Bus", (void*)-1); -+ enable_irq (64+ISC_PCI_XLB); -+ */ -+ if(request_irq(64+ISC_PCI_XLB, xlb_interrupt, -+ IRQF_DISABLED, "PCI XL Bus", (void*)-1)){ -+ printk("Cannot allocate ISC_PCI_XLB IRQ\n"); -+ return (struct pci_bus_info *)-EBUSY; -+ } -+ -+ MCF_ICR(ISC_PCI_ARB) = ILP_PCI_ARB; -+ /*request_irq(64+ISC_PCI_ARB, arb_interrupt, -+ SA_INTERRUPT, "PCI Arbiter", (void*)-1); -+ enable_irq (64+ISC_PCI_ARB); -+ */ -+ if(request_irq(64+ISC_PCI_ARB, arb_interrupt, -+ IRQF_DISABLED, "PCI Arbiter", (void*)-1)){ -+ printk("Cannot allocate ISC_PCI_ARB IRQ\n"); -+ return (struct pci_bus_info *)-EBUSY; -+ } -+ -+ /* Set slots interrupt setting */ -+ for (i = 0; i < N_IRQS; i++) -+ { -+ /* Set trailing edge for PCI interrupts */ -+ MCF_EPPAR &= ~MCF_EPPAR_EPPA(irq_lines[i], 0x3); -+ if (irq_lines[i] == 5) -+ MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i], MCF_EPPAR_EPPAx_FALLING); -+ else -+ MCF_EPPAR |= MCF_EPPAR_EPPA(irq_lines[i], 0/*MCF_EPPAR_EPPAx_FALLING*/); -+ /* Turn on irq line in eport */ -+ MCF_EPIER |= MCF_EPIER_EPIE(irq_lines[i]); -+ -+ /* Enable irq in gpio */ -+ if (irq_lines[i] == 5) -+ MCF_PAR_FECI2CIRQ |= 1; -+ -+ if (irq_lines[i] == 6) -+ MCF_PAR_FECI2CIRQ |= 2; -+ -+ /* Register external interrupt handlers */ -+ sprintf(irq_name[i], "PCI IRQ%d", irq_lines[i]); -+ /*request_irq(64 + irq_lines[i], eint_handler, -+ SA_SHIRQ, irq_name[i], (void*)-1); -+ enable_irq(64 + irq_lines[i]);*/ -+ if(request_irq(64 + irq_lines[i], eint_handler, -+ IRQF_SHARED, irq_name[i], (void*)-1)){ -+ printk("Cannot allocate irq_lines[%d] IRQ\n", irq_lines[i]); -+ return (struct pci_bus_info *)-EBUSY; -+ } -+ } -+ -+ /* Clear PCI Reset and wait for devices to reset */ -+ MCF_PCIGSCR &= ~MCF_PCIGSCR_PR; -+ schedule_timeout((5 * HZ) / 10); -+ /* Remap initiator windows (should be 1:1 to the physical memory) */ -+ pci_mem_va = (int) ioremap_nocache(HOST_MEM_BASE, PCI_MEM_SIZE + PCI_IO_SIZE); -+#if 1 -+ printk("%s: MEMBase_phy %x, Virt %x, len %x\n",__FUNCTION__, -+ HOST_MEM_BASE,pci_mem_va,PCI_MEM_SIZE + PCI_IO_SIZE); -+#endif -+ BUG_ON(pci_mem_va != HOST_MEM_BASE); -+ -+ /* Setup bios32 and pci bus driver callbacks */ -+ bus.m68k_pci_ops = &bus_ops; -+ bus.fixup = coldfire_fixup; -+ bus.conf_device = configure_device; -+ -+ return &bus; -+} -+ ---- /dev/null -+++ b/arch/m68k/coldfire/muldi3.S -@@ -0,0 +1,64 @@ -+/* -+ * Coldfire muldi3 assembly verion -+ */ -+ -+#include <linux/linkage.h> -+.globl __muldi3 -+ -+ENTRY(__muldi3) -+ linkw %fp,#0 -+ lea %sp@(-32),%sp -+ moveml %d2-%d7/%a2-%a3,%sp@ -+ moveal %fp@(8), %a2 -+ moveal %fp@(12), %a3 -+ moveal %fp@(16), %a0 -+ moveal %fp@(20),%a1 -+ movel %a3,%d2 -+ andil #65535,%d2 -+ movel %a3,%d3 -+ clrw %d3 -+ swap %d3 -+ movel %a1,%d0 -+ andil #65535,%d0 -+ movel %a1,%d1 -+ clrw %d1 -+ swap %d1 -+ movel %d2,%d7 -+ mulsl %d0,%d7 -+ movel %d2,%d4 -+ mulsl %d1,%d4 -+ movel %d3,%d2 -+ mulsl %d0,%d2 -+ mulsl %d1,%d3 -+ movel %d7,%d0 -+ clrw %d0 -+ swap %d0 -+ addl %d0,%d4 -+ addl %d2,%d4 -+ cmpl %d4,%d2 -+ blss 1f -+ addil #65536,%d3 -+1: -+ movel %d4,%d0 -+ clrw %d0 -+ swap %d0 -+ movel %d3,%d5 -+ addl %d0,%d5 -+ movew %d4,%d6 -+ swap %d6 -+ movew %d7,%d6 -+ movel %d5,%d0 -+ movel %d6,%d1 -+ movel %a3,%d2 -+ movel %a0,%d3 -+ mulsl %d3,%d2 -+ movel %a2,%d3 -+ movel %a1,%d4 -+ mulsl %d4,%d3 -+ addl %d3,%d2 -+ movel %d2,%d0 -+ addl %d5,%d0 -+ moveml %sp@, %d2-%d7/%a2-%a3 -+ lea %sp@(32),%sp -+ unlk %fp -+ rts ---- /dev/null -+++ b/arch/m68k/coldfire/pci.c -@@ -0,0 +1,245 @@ -+/* -+ * linux/arch/m68k/coldfire/pci.c -+ * -+ * PCI initialization for Coldfire architectures. -+ * -+ * Currently Supported: -+ * M5445x -+ * -+ * Copyright (c) 2007 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/pci.h> -+ -+#include <asm/mcfsim.h> -+#include <asm/pci.h> -+ -+/* pci ops for reading/writing config */ -+struct pci_raw_ops *raw_pci_ops; -+ -+/* pci debug flag */ -+static int debug_pci; -+ -+#ifdef CONFIG_M54455 -+extern int init_mcf5445x_pci(void); -+extern void mcf5445x_conf_device(struct pci_dev *dev); -+extern void mcf5445x_pci_dumpregs(void); -+ -+extern struct resource pci_ioport_resource; -+extern struct resource pci_iomem_resource; -+#endif -+ -+static int -+pci_read(struct pci_bus *bus, unsigned int devfn, int where, -+ int size, u32 *value) -+{ -+ return raw_pci_ops->read(0, bus->number, devfn, where, size, value); -+} -+ -+static int -+pci_write(struct pci_bus *bus, unsigned int devfn, int where, -+ int size, u32 value) -+{ -+ return raw_pci_ops->write(0, bus->number, devfn, where, size, value); -+} -+ -+struct pci_ops pci_root_ops = { -+ .read = pci_read, -+ .write = pci_write, -+}; -+ -+/* -+ * pcibios_setup(char *) -+ * -+ * Initialize the pcibios based on cmd line params. -+ */ -+char * -+pcibios_setup(char *str) -+{ -+ if (!strcmp(str, "debug")) { -+ debug_pci = 1; -+ return NULL; -+ } -+ return str; -+} -+ -+/* -+ * We need to avoid collisions with `mirrored' VGA ports -+ * and other strange ISA hardware, so we always want the -+ * addresses to be allocated in the 0x000-0x0ff region -+ * modulo 0x400. -+ * -+ * Why? Because some silly external IO cards only decode -+ * the low 10 bits of the IO address. The 0x00-0xff region -+ * is reserved for motherboard devices that decode all 16 -+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff, -+ * but we want to try to avoid allocating at 0x2900-0x2bff -+ * which might have be mirrored at 0x0100-0x03ff.. -+ */ -+void -+pcibios_align_resource(void *data, struct resource *res, resource_size_t size, -+ resource_size_t align) -+{ -+ struct pci_dev *dev = data; -+ -+ if (res->flags & IORESOURCE_IO) { -+ resource_size_t start = res->start; -+ -+ if (size > 0x100) -+ printk(KERN_ERR "PCI: I/O Region %s/%d too large" -+ " (%ld bytes)\n", pci_name(dev), -+ dev->resource - res, (long int)size); -+ -+ if (start & 0x300) { -+ start = (start + 0x3ff) & ~0x3ff; -+ res->start = start; -+ } -+ } -+} -+ -+/* -+ * Swizzle the device pin each time we cross a bridge -+ * and return the slot number. -+ */ -+static u8 __devinit -+pcibios_swizzle(struct pci_dev *dev, u8 *pin) -+{ -+ return 0; -+} -+ -+/* -+ * Map a slot/pin to an IRQ. -+ */ -+static int -+pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ return 0x43; -+} -+ -+/* -+ * pcibios_update_irq(struct pci_dev *dev, int irq) -+ * -+ * Update a PCI interrupt. -+ */ -+void -+pcibios_update_irq(struct pci_dev *dev, int irq) -+{ -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -+} -+ -+/* -+ * pcibios_enable_device(struct pci_dev *dev, int mask) -+ * -+ * Enable a device on the PCI bus. -+ */ -+int -+pcibios_enable_device(struct pci_dev *dev, int mask) -+{ -+ u16 cmd, old_cmd; -+ int idx; -+ struct resource *r; -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ old_cmd = cmd; -+ for (idx = 0; idx < 6; idx++) { -+ r = &dev->resource[idx]; -+ if (!r->start && r->end) { -+ printk(KERN_ERR "PCI: Device %s not available because " -+ "of resource collisions\n", pci_name(dev)); -+ return -EINVAL; -+ } -+ if (r->flags & IORESOURCE_IO) -+ cmd |= PCI_COMMAND_IO; -+ if (r->flags & IORESOURCE_MEM) -+ cmd |= PCI_COMMAND_MEMORY; -+ } -+ if (cmd != old_cmd) { -+ printk("PCI: Enabling device %s (%04x -> %04x)\n", -+ pci_name(dev), old_cmd, cmd); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+#ifdef CONFIG_M54455 -+ mcf5445x_conf_device(dev); -+#endif -+ } -+ -+ return 0; -+} -+ -+/* -+ * pcibios_fixup_bus(struct pci_bus *bus) -+ */ -+void -+pcibios_fixup_bus(struct pci_bus *bus) -+{ -+ struct pci_dev *dev = bus->self; -+ -+ if (!dev) { -+ /* Root bus. */ -+#ifdef CONFIG_M54455 -+ bus->resource[0] = &pci_ioport_resource; -+ bus->resource[1] = &pci_iomem_resource; -+#endif -+ } -+} -+ -+/* -+ * pcibios_init(void) -+ * -+ * Allocate/initialize low level pci bus/devices. -+ */ -+static int __init -+pcibios_init(void) -+{ -+ struct pci_bus *bus; -+ -+ if (!raw_pci_ops) { -+ printk(KERN_WARNING "PCIBIOS: FATAL: NO PCI Hardware found\n"); -+ return 0; -+ } -+ -+ /* allocate and scan the (only) bus */ -+ bus = pci_scan_bus_parented(NULL, 0, &pci_root_ops, NULL); -+ -+ /* setup everything */ -+ if (bus) { -+ /* compute the bridge window sizes */ -+ pci_bus_size_bridges(bus); -+ -+ /* (re)assign device resources */ -+ pci_bus_assign_resources(bus); -+ -+ /* add the bus to the system */ -+ pci_bus_add_devices(bus); -+ -+ /* fixup irqs */ -+ pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq); -+ } -+ -+ return 0; -+} -+ -+/* -+ * pci_init(void) -+ * -+ * Initialize the PCI Hardware. -+ */ -+static int __init -+pci_init(void) -+{ -+#if defined(CONFIG_M54455) -+ init_mcf5445x_pci(); -+#endif -+ if (!raw_pci_ops) -+ printk(KERN_ERR "PCI: FATAL: NO PCI Detected\n"); -+ -+ return 0; -+} -+ -+/* low level hardware (first) */ -+arch_initcall(pci_init); -+ -+/* basic bios init (second) */ -+subsys_initcall(pcibios_init); ---- /dev/null -+++ b/arch/m68k/coldfire/signal.c -@@ -0,0 +1,871 @@ -+/* -+ * linux/arch/m68k/kernel/signal.c -+ * -+ * Copyright (C) 1991, 1992 Linus Torvalds -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+/* -+ * Derived from m68k/kernel/signal.c and the original authors are credited -+ * there. -+ * -+ * Coldfire support by: -+ * Matt Waddel Matt.Waddel@freescale.com -+ * Copyright Freescale Semiconductor, Inc 2007 -+ */ -+ -+#include <linux/sched.h> -+#include <linux/mm.h> -+#include <linux/kernel.h> -+#include <linux/signal.h> -+#include <linux/syscalls.h> -+#include <linux/errno.h> -+#include <linux/wait.h> -+#include <linux/ptrace.h> -+#include <linux/unistd.h> -+#include <linux/stddef.h> -+#include <linux/highuid.h> -+#include <linux/personality.h> -+#include <linux/tty.h> -+#include <linux/binfmts.h> -+ -+#include <asm/setup.h> -+#include <asm/cf_uaccess.h> -+#include <asm/cf_pgtable.h> -+#include <asm/traps.h> -+#include <asm/ucontext.h> -+#include <asm/cacheflush.h> -+ -+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -+ -+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs); -+ -+const int frame_extra_sizes[16] = { -+ [1] = -1, -+ [2] = sizeof(((struct frame *)0)->un.fmt2), -+ [3] = sizeof(((struct frame *)0)->un.fmt3), -+ [4] = 0, -+ [5] = -1, -+ [6] = -1, -+ [7] = sizeof(((struct frame *)0)->un.fmt7), -+ [8] = -1, -+ [9] = sizeof(((struct frame *)0)->un.fmt9), -+ [10] = sizeof(((struct frame *)0)->un.fmta), -+ [11] = sizeof(((struct frame *)0)->un.fmtb), -+ [12] = -1, -+ [13] = -1, -+ [14] = -1, -+ [15] = -1, -+}; -+ -+/* -+ * Atomically swap in the new signal mask, and wait for a signal. -+ */ -+asmlinkage int do_sigsuspend(struct pt_regs *regs) -+{ -+ old_sigset_t mask = regs->d3; -+ sigset_t saveset; -+ -+ mask &= _BLOCKABLE; -+ spin_lock_irq(¤t->sighand->siglock); -+ saveset = current->blocked; -+ siginitset(¤t->blocked, mask); -+ recalc_sigpending(); -+ spin_unlock_irq(¤t->sighand->siglock); -+ -+ regs->d0 = -EINTR; -+ while (1) { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule(); -+ if (do_signal(&saveset, regs)) -+ return -EINTR; -+ } -+} -+ -+asmlinkage int -+do_rt_sigsuspend(struct pt_regs *regs) -+{ -+ sigset_t __user *unewset = (sigset_t __user *)regs->d1; -+ size_t sigsetsize = (size_t)regs->d2; -+ sigset_t saveset, newset; -+ -+ /* XXX: Don't preclude handling different sized sigset_t's. */ -+ if (sigsetsize != sizeof(sigset_t)) -+ return -EINVAL; -+ -+ if (copy_from_user(&newset, unewset, sizeof(newset))) -+ return -EFAULT; -+ sigdelsetmask(&newset, ~_BLOCKABLE); -+ -+ spin_lock_irq(¤t->sighand->siglock); -+ saveset = current->blocked; -+ current->blocked = newset; -+ recalc_sigpending(); -+ spin_unlock_irq(¤t->sighand->siglock); -+ -+ regs->d0 = -EINTR; -+ while (1) { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule(); -+ if (do_signal(&saveset, regs)) -+ return -EINTR; -+ } -+} -+ -+asmlinkage int -+sys_sigaction(int sig, const struct old_sigaction __user *act, -+ struct old_sigaction __user *oact) -+{ -+ struct k_sigaction new_ka, old_ka; -+ int ret; -+ -+ if (act) { -+ old_sigset_t mask; -+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) || -+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) || -+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) -+ return -EFAULT; -+ __get_user(new_ka.sa.sa_flags, &act->sa_flags); -+ __get_user(mask, &act->sa_mask); -+ siginitset(&new_ka.sa.sa_mask, mask); -+ } -+ -+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); -+ -+ if (!ret && oact) { -+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || -+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || -+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) -+ return -EFAULT; -+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags); -+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); -+ } -+ -+ return ret; -+} -+ -+asmlinkage int -+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss) -+{ -+ return do_sigaltstack(uss, uoss, rdusp()); -+} -+ -+ -+/* -+ * Do a signal return; undo the signal stack. -+ * -+ * Keep the return code on the stack quadword aligned! -+ * That makes the cache flush below easier. -+ */ -+ -+struct sigframe -+{ -+ char __user *pretcode; -+ int sig; -+ int code; -+ struct sigcontext __user *psc; -+ char retcode[16]; -+ unsigned long extramask[_NSIG_WORDS-1]; -+ struct sigcontext sc; -+}; -+ -+struct rt_sigframe -+{ -+ char __user *pretcode; -+ int sig; -+ struct siginfo __user *pinfo; -+ void __user *puc; -+ char retcode[16]; -+ struct siginfo info; -+ struct ucontext uc; -+}; -+ -+#define FPCONTEXT_SIZE 216 -+#define uc_fpstate uc_filler[0] -+#define uc_formatvec uc_filler[FPCONTEXT_SIZE/4] -+#define uc_extra uc_filler[FPCONTEXT_SIZE/4+1] -+ -+#ifdef CONFIG_FPU -+static unsigned char fpu_version; /* version num of fpu, set by setup_frame */ -+ -+static inline int restore_fpu_state(struct sigcontext *sc) -+{ -+ int err = 1; -+ -+ if (FPU_IS_EMU) { -+ /* restore registers */ -+ memcpy(current->thread.fpcntl, sc->sc_fpcntl, 12); -+ memcpy(current->thread.fp, sc->sc_fpregs, 24); -+ return 0; -+ } -+ -+ if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) { -+ /* Verify the frame format. */ -+ if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version)) -+ goto out; -+ if (CPU_IS_020_OR_030) { -+ if (m68k_fputype & FPU_68881 && -+ !(sc->sc_fpstate[1] == 0x18 || sc->sc_fpstate[1] == 0xb4)) -+ goto out; -+ if (m68k_fputype & FPU_68882 && -+ !(sc->sc_fpstate[1] == 0x38 || sc->sc_fpstate[1] == 0xd4)) -+ goto out; -+ } else if (CPU_IS_040) { -+ if (!(sc->sc_fpstate[1] == 0x00 || -+ sc->sc_fpstate[1] == 0x28 || -+ sc->sc_fpstate[1] == 0x60)) -+ goto out; -+ } else if (CPU_IS_060) { -+ if (!(sc->sc_fpstate[3] == 0x00 || -+ sc->sc_fpstate[3] == 0x60 || -+ sc->sc_fpstate[3] == 0xe0)) -+ goto out; -+ } else -+ goto out; -+ -+ } -+ err = 0; -+ -+out: -+ return err; -+} -+ -+static inline int rt_restore_fpu_state(struct ucontext __user *uc) -+{ -+ unsigned char fpstate[FPCONTEXT_SIZE]; -+ int context_size = CPU_IS_060 ? 8 : 0; -+ fpregset_t fpregs; -+ int err = 1; -+ -+ if (FPU_IS_EMU) { -+ /* restore fpu control register */ -+ if (__copy_from_user(current->thread.fpcntl, -+ uc->uc_mcontext.fpregs.f_fpcntl, 12)) -+ goto out; -+ /* restore all other fpu register */ -+ if (__copy_from_user(current->thread.fp, -+ uc->uc_mcontext.fpregs.f_fpregs, 96)) -+ goto out; -+ return 0; -+ } -+ -+ if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate)) -+ goto out; -+ if (CPU_IS_060 ? fpstate[2] : fpstate[0]) { -+ if (!CPU_IS_060) -+ context_size = fpstate[1]; -+ /* Verify the frame format. */ -+ if (!CPU_IS_060 && (fpstate[0] != fpu_version)) -+ goto out; -+ if (CPU_IS_020_OR_030) { -+ if (m68k_fputype & FPU_68881 && -+ !(context_size == 0x18 || context_size == 0xb4)) -+ goto out; -+ if (m68k_fputype & FPU_68882 && -+ !(context_size == 0x38 || context_size == 0xd4)) -+ goto out; -+ } else if (CPU_IS_040) { -+ if (!(context_size == 0x00 || -+ context_size == 0x28 || -+ context_size == 0x60)) -+ goto out; -+ } else if (CPU_IS_060) { -+ if (!(fpstate[3] == 0x00 || -+ fpstate[3] == 0x60 || -+ fpstate[3] == 0xe0)) -+ goto out; -+ } else -+ goto out; -+ if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs, -+ sizeof(fpregs))) -+ goto out; -+ } -+ if (context_size && -+ __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1, -+ context_size)) -+ goto out; -+ err = 0; -+ -+out: -+ return err; -+} -+#endif -+ -+static inline int -+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, -+ void __user *fp, int *pd0) -+{ -+ int fsize, formatvec; -+ struct sigcontext context; -+ int err = 0; -+ -+ /* get previous context */ -+ if (copy_from_user(&context, usc, sizeof(context))) -+ goto badframe; -+ -+ /* restore passed registers */ -+ regs->d1 = context.sc_d1; -+ regs->a0 = context.sc_a0; -+ regs->a1 = context.sc_a1; -+ regs->sr = (regs->sr & 0xff00) | (context.sc_sr & 0xff); -+ regs->pc = context.sc_pc; -+ regs->orig_d0 = -1; /* disable syscall checks */ -+ wrusp(context.sc_usp); -+ formatvec = context.sc_formatvec; -+ regs->format = formatvec >> 12; -+ regs->vector = formatvec & 0xfff; -+ -+#ifdef CONFIG_FPU -+ err = restore_fpu_state(&context); -+#endif -+ -+ fsize = frame_extra_sizes[regs->format]; -+ if (fsize < 0) { -+ /* -+ * user process trying to return with weird frame format -+ */ -+#ifdef DEBUG -+ printk(KERN_DEBUG "user process returning with weird \ -+ frame format\n"); -+#endif -+ goto badframe; -+ } -+ -+ /* OK. Make room on the supervisor stack for the extra junk, -+ * if necessary. -+ */ -+ -+ { -+ struct switch_stack *sw = (struct switch_stack *)regs - 1; -+ regs->d0 = context.sc_d0; -+#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack)) -+ __asm__ __volatile__ -+ (" movel %0,%/sp\n\t" -+ " bra ret_from_signal\n" -+ "4:\n" -+ ".section __ex_table,\"a\"\n" -+ " .align 4\n" -+ " .long 2b,4b\n" -+ ".previous" -+ : /* no outputs, it doesn't ever return */ -+ : "a" (sw), "d" (fsize), "d" (frame_offset/4-1), -+ "n" (frame_offset), "a" (fp) -+ : "a0"); -+#undef frame_offset -+ /* -+ * If we ever get here an exception occurred while -+ * building the above stack-frame. -+ */ -+ goto badframe; -+ } -+ -+ *pd0 = context.sc_d0; -+ return err; -+ -+badframe: -+ return 1; -+} -+ -+static inline int -+rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw, -+ struct ucontext __user *uc, int *pd0) -+{ -+ int fsize, temp; -+ greg_t __user *gregs = uc->uc_mcontext.gregs; -+ unsigned long usp; -+ int err; -+ -+ err = __get_user(temp, &uc->uc_mcontext.version); -+ if (temp != MCONTEXT_VERSION) -+ goto badframe; -+ /* restore passed registers */ -+ err |= __get_user(regs->d0, &gregs[0]); -+ err |= __get_user(regs->d1, &gregs[1]); -+ err |= __get_user(regs->d2, &gregs[2]); -+ err |= __get_user(regs->d3, &gregs[3]); -+ err |= __get_user(regs->d4, &gregs[4]); -+ err |= __get_user(regs->d5, &gregs[5]); -+ err |= __get_user(sw->d6, &gregs[6]); -+ err |= __get_user(sw->d7, &gregs[7]); -+ err |= __get_user(regs->a0, &gregs[8]); -+ err |= __get_user(regs->a1, &gregs[9]); -+ err |= __get_user(regs->a2, &gregs[10]); -+ err |= __get_user(sw->a3, &gregs[11]); -+ err |= __get_user(sw->a4, &gregs[12]); -+ err |= __get_user(sw->a5, &gregs[13]); -+ err |= __get_user(sw->a6, &gregs[14]); -+ err |= __get_user(usp, &gregs[15]); -+ wrusp(usp); -+ err |= __get_user(regs->pc, &gregs[16]); -+ err |= __get_user(temp, &gregs[17]); -+ regs->sr = (regs->sr & 0xff00) | (temp & 0xff); -+ regs->orig_d0 = -1; /* disable syscall checks */ -+ err |= __get_user(temp, &uc->uc_formatvec); -+ regs->format = temp >> 12; -+ regs->vector = temp & 0xfff; -+ -+#ifdef CONFIG_FPU -+ err |= rt_restore_fpu_state(uc); -+#endif -+ -+ if (do_sigaltstack(&uc->uc_stack, NULL, usp) == -EFAULT) -+ goto badframe; -+ -+ fsize = frame_extra_sizes[regs->format]; -+ if (fsize < 0) { -+ /* -+ * user process trying to return with weird frame format -+ */ -+#ifdef DEBUG -+ printk(KERN_DEBUG "user process returning with weird \ -+ frame format\n"); -+#endif -+ goto badframe; -+ } -+ -+ /* OK. Make room on the supervisor stack for the extra junk, -+ * if necessary. -+ */ -+ -+ { -+#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack)) -+ __asm__ __volatile__ -+ (" movel %0,%/sp\n\t" -+ " bra ret_from_signal\n" -+ "4:\n" -+ ".section __ex_table,\"a\"\n" -+ " .align 4\n" -+ " .long 2b,4b\n" -+ ".previous" -+ : /* no outputs, it doesn't ever return */ -+ : "a" (sw), "d" (fsize), "d" (frame_offset/4-1), -+ "n" (frame_offset), "a" (&uc->uc_extra) -+ : "a0"); -+#undef frame_offset -+ /* -+ * If we ever get here an exception occurred while -+ * building the above stack-frame. -+ */ -+ goto badframe; -+ } -+ -+ *pd0 = regs->d0; -+ return err; -+ -+badframe: -+ return 1; -+} -+ -+asmlinkage int do_sigreturn(unsigned long __unused) -+{ -+ struct switch_stack *sw = (struct switch_stack *) &__unused; -+ struct pt_regs *regs = (struct pt_regs *) (sw + 1); -+ unsigned long usp = rdusp(); -+ struct sigframe __user *frame = (struct sigframe __user *)(usp - 4); -+ sigset_t set; -+ int d0; -+ -+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) -+ goto badframe; -+ if (__get_user(set.sig[0], &frame->sc.sc_mask) || -+ (_NSIG_WORDS > 1 && -+ __copy_from_user(&set.sig[1], &frame->extramask, -+ sizeof(frame->extramask)))) -+ goto badframe; -+ -+ sigdelsetmask(&set, ~_BLOCKABLE); -+ spin_lock_irq(¤t->sighand->siglock); -+ current->blocked = set; -+ recalc_sigpending(); -+ spin_unlock_irq(¤t->sighand->siglock); -+ -+ if (restore_sigcontext(regs, &frame->sc, frame + 1, &d0)) -+ goto badframe; -+ return d0; -+ -+badframe: -+ force_sig(SIGSEGV, current); -+ return 0; -+} -+ -+asmlinkage int do_rt_sigreturn(unsigned long __unused) -+{ -+ struct switch_stack *sw = (struct switch_stack *) &__unused; -+ struct pt_regs *regs = (struct pt_regs *) (sw + 1); -+ unsigned long usp = rdusp(); -+ struct rt_sigframe __user *frame = -+ (struct rt_sigframe __user *)(usp - 4); -+ sigset_t set; -+ int d0; -+ -+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) -+ goto badframe; -+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) -+ goto badframe; -+ -+ sigdelsetmask(&set, ~_BLOCKABLE); -+ spin_lock_irq(¤t->sighand->siglock); -+ current->blocked = set; -+ recalc_sigpending(); -+ spin_unlock_irq(¤t->sighand->siglock); -+ -+ if (rt_restore_ucontext(regs, sw, &frame->uc, &d0)) -+ goto badframe; -+ return d0; -+ -+badframe: -+ force_sig(SIGSEGV, current); -+ return 0; -+} -+ -+#ifdef CONFIG_FPU -+/* -+ * Set up a signal frame. -+ */ -+ -+static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs) -+{ -+ if (FPU_IS_EMU) { -+ /* save registers */ -+ memcpy(sc->sc_fpcntl, current->thread.fpcntl, 12); -+ memcpy(sc->sc_fpregs, current->thread.fp, 24); -+ return; -+ } -+} -+ -+static inline int rt_save_fpu_state(struct ucontext __user *uc, -+ struct pt_regs *regs) -+{ -+ int err = 0; -+ -+ if (FPU_IS_EMU) { -+ /* save fpu control register */ -+ err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpcntl, -+ current->thread.fpcntl, 12); -+ /* save all other fpu register */ -+ err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpregs, -+ current->thread.fp, 96); -+ return err; -+ } -+ -+ return err; -+} -+#endif -+ -+static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, -+ unsigned long mask) -+{ -+ sc->sc_mask = mask; -+ sc->sc_usp = rdusp(); -+ sc->sc_d0 = regs->d0; -+ sc->sc_d1 = regs->d1; -+ sc->sc_a0 = regs->a0; -+ sc->sc_a1 = regs->a1; -+ sc->sc_sr = regs->sr; -+ sc->sc_pc = regs->pc; -+ sc->sc_formatvec = regs->format << 12 | regs->vector; -+#ifdef CONFIG_FPU -+ save_fpu_state(sc, regs); -+#endif -+} -+ -+static inline int rt_setup_ucontext(struct ucontext __user *uc, -+ struct pt_regs *regs) -+{ -+ struct switch_stack *sw = (struct switch_stack *)regs - 1; -+ greg_t __user *gregs = uc->uc_mcontext.gregs; -+ int err = 0; -+ -+ err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version); -+ err |= __put_user(regs->d0, &gregs[0]); -+ err |= __put_user(regs->d1, &gregs[1]); -+ err |= __put_user(regs->d2, &gregs[2]); -+ err |= __put_user(regs->d3, &gregs[3]); -+ err |= __put_user(regs->d4, &gregs[4]); -+ err |= __put_user(regs->d5, &gregs[5]); -+ err |= __put_user(sw->d6, &gregs[6]); -+ err |= __put_user(sw->d7, &gregs[7]); -+ err |= __put_user(regs->a0, &gregs[8]); -+ err |= __put_user(regs->a1, &gregs[9]); -+ err |= __put_user(regs->a2, &gregs[10]); -+ err |= __put_user(sw->a3, &gregs[11]); -+ err |= __put_user(sw->a4, &gregs[12]); -+ err |= __put_user(sw->a5, &gregs[13]); -+ err |= __put_user(sw->a6, &gregs[14]); -+ err |= __put_user(rdusp(), &gregs[15]); -+ err |= __put_user(regs->pc, &gregs[16]); -+ err |= __put_user(regs->sr, &gregs[17]); -+ err |= __put_user((regs->format << 12) | regs->vector, -+ &uc->uc_formatvec); -+#ifdef CONFIG_FPU -+ err |= rt_save_fpu_state(uc, regs); -+#endif -+ return err; -+} -+ -+static inline void push_cache(unsigned long vaddr) -+{ -+#if 0 -+// JKM -- need to add into the old cpushl cache stuff -+ cf_cache_push(__pa(vaddr), 8); -+#endif -+} -+ -+static inline void __user * -+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) -+{ -+ unsigned long usp; -+ -+ /* Default to using normal stack. */ -+ usp = rdusp(); -+ -+ /* This is the X/Open sanctioned signal stack switching. */ -+ if (ka->sa.sa_flags & SA_ONSTACK) { -+ if (!sas_ss_flags(usp)) -+ usp = current->sas_ss_sp + current->sas_ss_size; -+ } -+ return (void __user *)((usp - frame_size) & -8UL); -+} -+ -+static void setup_frame(int sig, struct k_sigaction *ka, -+ sigset_t *set, struct pt_regs *regs) -+{ -+ struct sigframe __user *frame; -+ int fsize = frame_extra_sizes[regs->format]; -+ struct sigcontext context; -+ int err = 0; -+ -+ if (fsize < 0) { -+#ifdef DEBUG -+ printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n", -+ regs->format); -+#endif -+ goto give_sigsegv; -+ } -+ -+ frame = get_sigframe(ka, regs, sizeof(*frame)); -+ -+ err |= __put_user((current_thread_info()->exec_domain -+ && current_thread_info()->exec_domain->signal_invmap -+ && sig < 32 -+ ? current_thread_info()->exec_domain->signal_invmap[sig] -+ : sig), -+ &frame->sig); -+ -+ err |= __put_user(regs->vector, &frame->code); -+ err |= __put_user(&frame->sc, &frame->psc); -+ -+ if (_NSIG_WORDS > 1) -+ err |= copy_to_user(frame->extramask, &set->sig[1], -+ sizeof(frame->extramask)); -+ -+ setup_sigcontext(&context, regs, set->sig[0]); -+ err |= copy_to_user(&frame->sc, &context, sizeof(context)); -+ -+ /* Set up to return from userspace. */ -+ err |= __put_user(frame->retcode, &frame->pretcode); -+ /* moveq #,d0; trap #0 */ -+ err |= __put_user(0x70004e40 + (__NR_sigreturn << 16), -+ (long __user *)(frame->retcode)); -+ -+ if (err) -+ goto give_sigsegv; -+ -+ push_cache((unsigned long) &frame->retcode); -+ -+ /* Set up registers for signal handler */ -+ wrusp((unsigned long) frame); -+ regs->pc = (unsigned long) ka->sa.sa_handler; -+ -+adjust_stack: -+ /* Prepare to skip over the extra stuff in the exception frame. */ -+ if (regs->stkadj) { -+ struct pt_regs *tregs = -+ (struct pt_regs *)((ulong)regs + regs->stkadj); -+#ifdef DEBUG -+ printk(KERN_DEBUG "Performing stackadjust=%04x\n", -+ regs->stkadj); -+#endif -+ /* This must be copied with decreasing addresses to -+ handle overlaps. */ -+ tregs->vector = 0; -+ tregs->format = 0; -+ tregs->pc = regs->pc; -+ tregs->sr = regs->sr; -+ } -+ return; -+ -+give_sigsegv: -+ force_sigsegv(sig, current); -+ goto adjust_stack; -+} -+ -+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, -+ sigset_t *set, struct pt_regs *regs) -+{ -+ struct rt_sigframe __user *frame; -+ int fsize = frame_extra_sizes[regs->format]; -+ int err = 0; -+ -+ if (fsize < 0) { -+#ifdef DEBUG -+ printk(KERN_DEBUG "setup_frame: Unknown frame format %#x\n", -+ regs->format); -+#endif -+ goto give_sigsegv; -+ } -+ -+ frame = get_sigframe(ka, regs, sizeof(*frame)); -+ -+ if (fsize) { -+ err |= copy_to_user(&frame->uc.uc_extra, regs + 1, fsize); -+ regs->stkadj = fsize; -+ } -+ -+ err |= __put_user((current_thread_info()->exec_domain -+ && current_thread_info()->exec_domain->signal_invmap -+ && sig < 32 -+ ? current_thread_info()->exec_domain->signal_invmap[sig] -+ : sig), -+ &frame->sig); -+ err |= __put_user(&frame->info, &frame->pinfo); -+ err |= __put_user(&frame->uc, &frame->puc); -+ err |= copy_siginfo_to_user(&frame->info, info); -+ -+ /* Create the ucontext. */ -+ err |= __put_user(0, &frame->uc.uc_flags); -+ err |= __put_user(NULL, &frame->uc.uc_link); -+ err |= __put_user((void __user *)current->sas_ss_sp, -+ &frame->uc.uc_stack.ss_sp); -+ err |= __put_user(sas_ss_flags(rdusp()), -+ &frame->uc.uc_stack.ss_flags); -+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); -+ err |= rt_setup_ucontext(&frame->uc, regs); -+ err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); -+ -+ /* Set up to return from userspace. */ -+ err |= __put_user(frame->retcode, &frame->pretcode); -+ -+ /* moveq #,d0; andi.l #,D0; trap #0 */ -+ err |= __put_user(0x70AD0280, (long *)(frame->retcode + 0)); -+ err |= __put_user(0x000000ff, (long *)(frame->retcode + 4)); -+ err |= __put_user(0x4e400000, (long *)(frame->retcode + 8)); -+ -+ if (err) -+ goto give_sigsegv; -+ -+ push_cache((unsigned long) &frame->retcode); -+ -+ /* Set up registers for signal handler */ -+ wrusp((unsigned long) frame); -+ regs->pc = (unsigned long) ka->sa.sa_handler; -+ -+adjust_stack: -+ /* Prepare to skip over the extra stuff in the exception frame. */ -+ if (regs->stkadj) { -+ struct pt_regs *tregs = -+ (struct pt_regs *)((ulong)regs + regs->stkadj); -+#ifdef DEBUG -+ printk(KERN_DEBUG "Performing stackadjust=%04x\n", -+ regs->stkadj); -+#endif -+ /* This must be copied with decreasing addresses to -+ handle overlaps. */ -+ tregs->vector = 0; -+ tregs->format = 0; -+ tregs->pc = regs->pc; -+ tregs->sr = regs->sr; -+ } -+ return; -+ -+give_sigsegv: -+ force_sigsegv(sig, current); -+ goto adjust_stack; -+} -+ -+static inline void -+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) -+{ -+ switch (regs->d0) { -+ case -ERESTARTNOHAND: -+ if (!has_handler) -+ goto do_restart; -+ regs->d0 = -EINTR; -+ break; -+ -+ case -ERESTARTSYS: -+ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) { -+ regs->d0 = -EINTR; -+ break; -+ } -+ /* fallthrough */ -+ case -ERESTARTNOINTR: -+do_restart: -+ regs->d0 = regs->orig_d0; -+ regs->pc -= 2; -+ break; -+ } -+} -+ -+/* -+ * OK, we're invoking a handler -+ */ -+static void -+handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info, -+ sigset_t *oldset, struct pt_regs *regs) -+{ -+ /* are we from a system call? */ -+ if (regs->orig_d0 >= 0) -+ /* If so, check system call restarting.. */ -+ handle_restart(regs, ka, 1); -+ -+ /* set up the stack frame */ -+ if (ka->sa.sa_flags & SA_SIGINFO) -+ setup_rt_frame(sig, ka, info, oldset, regs); -+ else -+ setup_frame(sig, ka, oldset, regs); -+ -+ if (ka->sa.sa_flags & SA_ONESHOT) -+ ka->sa.sa_handler = SIG_DFL; -+ -+ spin_lock_irq(¤t->sighand->siglock); -+ sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); -+ if (!(ka->sa.sa_flags & SA_NODEFER)) -+ sigaddset(¤t->blocked, sig); -+ recalc_sigpending(); -+ spin_unlock_irq(¤t->sighand->siglock); -+} -+ -+/* -+ * Note that 'init' is a special process: it doesn't get signals it doesn't -+ * want to handle. Thus you cannot kill init even with a SIGKILL even by -+ * mistake. -+ */ -+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs) -+{ -+ siginfo_t info; -+ struct k_sigaction ka; -+ int signr; -+ -+ current->thread.esp0 = (unsigned long) regs; -+ -+ if (!oldset) -+ oldset = ¤t->blocked; -+ -+ signr = get_signal_to_deliver(&info, &ka, regs, NULL); -+ if (signr > 0) { -+ /* Whee! Actually deliver the signal. */ -+ handle_signal(signr, &ka, &info, oldset, regs); -+ return 1; -+ } -+ -+ /* Did we come from a system call? */ -+ if (regs->orig_d0 >= 0) -+ /* Restart the system call - no handlers present */ -+ handle_restart(regs, NULL, 0); -+ -+ return 0; -+} ---- /dev/null -+++ b/arch/m68k/coldfire/traps.c -@@ -0,0 +1,455 @@ -+/* -+ * linux/arch/m68knommu/kernel/traps.c -+ * -+ * Copyright (C) 1993, 1994 by Hamish Macdonald -+ * -+ * 68040 fixes by Michael Rausch -+ * 68040 fixes by Martin Apel -+ * 68060 fixes by Roman Hodek -+ * 68060 fixes by Jesper Skov -+ * Coldfire fixes by Kurt Mahan -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+/* -+ * Sets up all exception vectors -+ */ -+#include <linux/sched.h> -+#include <linux/signal.h> -+#include <linux/kernel.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/a.out.h> -+#include <linux/user.h> -+#include <linux/string.h> -+#include <linux/linkage.h> -+#include <linux/init.h> -+#include <linux/ptrace.h> -+#include <linux/kallsyms.h> -+ -+#include <asm/setup.h> -+#include <asm/fpu.h> -+#include <asm/system.h> -+#include <asm/uaccess.h> -+#include <asm/traps.h> -+#include <asm/pgtable.h> -+#include <asm/machdep.h> -+#include <asm/siginfo.h> -+ -+static char const * const vec_names[] = { -+ "RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR", -+ "ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc", -+ "PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111", -+ "UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION", -+ "FORMAT ERROR", "UNINITIALIZED INTERRUPT", -+ "UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17", -+ "UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19", -+ "UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21", -+ "UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23", -+ "SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT", -+ "LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT", -+ "SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3", -+ "TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7", -+ "TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11", -+ "TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15", -+ "FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW", -+ "FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN", -+ "FPCP UNSUPPORTED OPERATION", -+ "MMU CONFIGURATION ERROR" -+}; -+ -+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, -+ unsigned long error_code); -+asmlinkage void trap_c(struct frame *fp); -+extern void __init coldfire_trap_init(void); -+ -+void __init trap_init(void) -+{ -+ coldfire_trap_init(); -+} -+ -+/* The following table converts the FS encoding of a ColdFire -+ exception stack frame into the error_code value needed by -+ do_fault. */ -+ -+static const unsigned char fs_err_code[] = { -+ 0, /* 0000 */ -+ 0, /* 0001 */ -+ 0, /* 0010 */ -+ 0, /* 0011 */ -+ 1, /* 0100 */ -+ 0, /* 0101 */ -+ 0, /* 0110 */ -+ 0, /* 0111 */ -+ 2, /* 1000 */ -+ 3, /* 1001 */ -+ 2, /* 1010 */ -+ 0, /* 1011 */ -+ 1, /* 1100 */ -+ 1, /* 1101 */ -+ 0, /* 1110 */ -+ 0 /* 1111 */ -+}; -+ -+#ifdef DEBUG -+static const char *fs_err_msg[16] = { -+ "Normal", -+ "Reserved", -+ "Interrupt during debug service routine", -+ "Reserved", -+ "X Protection", -+ "TLB X miss (opword)", -+ "TLB X miss (ext. word)", -+ "IFP in emulator mode", -+ "W Protection", -+ "Write error", -+ "TLB W miss", -+ "Reserved", -+ "R Protection", -+ "R/RMW Protection", -+ "TLB R miss", -+ "OEP in emulator mode", -+}; -+#endif -+ -+static inline void access_errorCF(struct frame *fp) -+{ -+ unsigned long int mmusr, complainingAddress; -+ unsigned int err_code, fs; -+ int need_page_fault; -+ -+ mmusr = fp->ptregs.mmusr; -+ complainingAddress = fp->ptregs.mmuar; -+#ifdef DEBUG -+ printk(KERN_DEBUG "pc %#lx, mmusr %#lx, complainingAddress %#lx\n", \ -+ fp->ptregs.pc, mmusr, complainingAddress); -+#endif -+ -+ /* -+ * error_code: -+ * bit 0 == 0 means no page found, 1 means protection fault -+ * bit 1 == 0 means read, 1 means write -+ */ -+ -+ fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1; -+ switch (fs) { -+ case 5: /* 0101 TLB opword X miss */ -+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0); -+ complainingAddress = fp->ptregs.pc; -+ break; -+ case 6: /* 0110 TLB extension word X miss */ -+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1); -+ complainingAddress = fp->ptregs.pc + sizeof(long); -+ break; -+ case 10: /* 1010 TLB W miss */ -+ need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0); -+ break; -+ case 14: /* 1110 TLB R miss */ -+ need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0); -+ break; -+ default: -+ /* 0000 Normal */ -+ /* 0001 Reserved */ -+ /* 0010 Interrupt during debug service routine */ -+ /* 0011 Reserved */ -+ /* 0100 X Protection */ -+ /* 0111 IFP in emulator mode */ -+ /* 1000 W Protection*/ -+ /* 1001 Write error*/ -+ /* 1011 Reserved*/ -+ /* 1100 R Protection*/ -+ /* 1101 R Protection*/ -+ /* 1111 OEP in emulator mode*/ -+ need_page_fault = 1; -+ break; -+ } -+ -+ if (need_page_fault) { -+ err_code = fs_err_code[fs]; -+ if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */ -+ err_code |= 2; /* bit1 - write, bit0 - protection */ -+ do_page_fault(&fp->ptregs, complainingAddress, err_code); -+ } -+} -+ -+void die_if_kernel(char *str, struct pt_regs *fp, int nr) -+{ -+ if (!(fp->sr & PS_S)) -+ return; -+ -+ console_verbose(); -+ printk(KERN_EMERG "%s: %08x\n", str, nr); -+ printk(KERN_EMERG "PC: [<%08lx>]", fp->pc); -+ print_symbol(" %s", fp->pc); -+ printk(KERN_EMERG "\nSR: %04x SP: %p a2: %08lx\n", -+ fp->sr, fp, fp->a2); -+ printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", -+ fp->d0, fp->d1, fp->d2, fp->d3); -+ printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", -+ fp->d4, fp->d5, fp->a0, fp->a1); -+ -+ printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n", -+ current->comm, current->pid, PAGE_SIZE+(unsigned long)current); -+ show_stack(NULL, (unsigned long *)fp); -+ do_exit(SIGSEGV); -+} -+ -+asmlinkage void buserr_c(struct frame *fp) -+{ -+ unsigned int fs; -+ -+ /* Only set esp0 if coming from user mode */ -+ if (user_mode(&fp->ptregs)) -+ current->thread.esp0 = (unsigned long) fp; -+ -+ fs = (fp->ptregs.fs2 << 2) | fp->ptregs.fs1; -+#if defined(DEBUG) -+ printk(KERN_DEBUG "*** Bus Error *** (%x)%s\n", fs, -+ fs_err_msg[fs & 0xf]); -+#endif -+ switch (fs) { -+ case 0x5: -+ case 0x6: -+ case 0x7: -+ case 0x9: -+ case 0xa: -+ case 0xd: -+ case 0xe: -+ case 0xf: -+ access_errorCF(fp); -+ break; -+ default: -+ die_if_kernel("bad frame format", &fp->ptregs, 0); -+#if defined(DEBUG) -+ printk(KERN_DEBUG "Unknown SIGSEGV - 4\n"); -+#endif -+ force_sig(SIGSEGV, current); -+ } -+} -+ -+ -+int kstack_depth_to_print = 48; -+ -+void show_stack(struct task_struct *task, unsigned long *stack) -+{ -+ unsigned long *endstack, addr, symaddr; -+ extern char _start, _etext; -+ int i; -+ -+ if (!stack) { -+ if (task) -+ stack = (unsigned long *)task->thread.ksp; -+ else -+ stack = (unsigned long *)&stack; -+ } -+ -+ addr = (unsigned long) stack; -+ endstack = (unsigned long *) PAGE_ALIGN(addr); -+ -+ printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack); -+ for (i = 0; i < kstack_depth_to_print; i++) { -+ if (stack + 1 > endstack) -+ break; -+ if (i % 8 == 0) -+ printk("\n" KERN_EMERG " "); -+ symaddr = *stack; -+ printk(KERN_EMERG " %08lx", *stack++); -+ if ((symaddr >= 0xc0000000) && (symaddr < 0xc1000000)) -+ print_symbol("(%s)", symaddr); -+ } -+ printk("\n"); -+ -+ printk(KERN_EMERG "Call Trace:"); -+ i = 0; -+ while (stack + 1 <= endstack) { -+ addr = *stack++; -+ /* -+ * If the address is either in the text segment of the -+ * kernel, or in the region which contains vmalloc'ed -+ * memory, it *may* be the address of a calling -+ * routine; if so, print it so that someone tracing -+ * down the cause of the crash will be able to figure -+ * out the call path that was taken. -+ */ -+ if (((addr >= (unsigned long) &_start) && -+ (addr <= (unsigned long) &_etext))) { -+ if (i % 4 == 0) -+ printk("\n" KERN_EMERG " "); -+ printk(KERN_EMERG " [<%08lx>]", addr); -+ i++; -+ } -+ } -+ printk("\n"); -+} -+ -+void bad_super_trap(struct frame *fp) -+{ -+ console_verbose(); -+ if (fp->ptregs.vector < sizeof(vec_names)/sizeof(vec_names[0])) -+ printk(KERN_WARNING "*** %s *** FORMAT=%X\n", -+ vec_names[fp->ptregs.vector], -+ fp->ptregs.format); -+ else -+ printk(KERN_WARNING "*** Exception %d *** FORMAT=%X\n", -+ fp->ptregs.vector, -+ fp->ptregs.format); -+ printk(KERN_WARNING "Current process id is %d\n", current->pid); -+ die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); -+} -+ -+asmlinkage void trap_c(struct frame *fp) -+{ -+ int sig; -+ siginfo_t info; -+ -+ if (fp->ptregs.sr & PS_S) { -+ if (fp->ptregs.vector == VEC_TRACE) { -+ /* traced a trapping instruction */ -+ current->ptrace |= PT_DTRACE; -+ } else -+ bad_super_trap(fp); -+ return; -+ } -+ -+ /* send the appropriate signal to the user program */ -+ switch (fp->ptregs.vector) { -+ case VEC_ADDRERR: -+ info.si_code = BUS_ADRALN; -+ sig = SIGBUS; -+ break; -+ case VEC_ILLEGAL: -+ case VEC_LINE10: -+ case VEC_LINE11: -+ info.si_code = ILL_ILLOPC; -+ sig = SIGILL; -+ break; -+ case VEC_PRIV: -+ info.si_code = ILL_PRVOPC; -+ sig = SIGILL; -+ break; -+ case VEC_COPROC: -+ info.si_code = ILL_COPROC; -+ sig = SIGILL; -+ break; -+ case VEC_TRAP1: /* gdbserver breakpoint */ -+ fp->ptregs.pc -= 2; -+ info.si_code = TRAP_TRACE; -+ sig = SIGTRAP; -+ break; -+ case VEC_TRAP2: -+ case VEC_TRAP3: -+ case VEC_TRAP4: -+ case VEC_TRAP5: -+ case VEC_TRAP6: -+ case VEC_TRAP7: -+ case VEC_TRAP8: -+ case VEC_TRAP9: -+ case VEC_TRAP10: -+ case VEC_TRAP11: -+ case VEC_TRAP12: -+ case VEC_TRAP13: -+ case VEC_TRAP14: -+ info.si_code = ILL_ILLTRP; -+ sig = SIGILL; -+ break; -+ case VEC_FPBRUC: -+ case VEC_FPOE: -+ case VEC_FPNAN: -+ info.si_code = FPE_FLTINV; -+ sig = SIGFPE; -+ break; -+ case VEC_FPIR: -+ info.si_code = FPE_FLTRES; -+ sig = SIGFPE; -+ break; -+ case VEC_FPDIVZ: -+ info.si_code = FPE_FLTDIV; -+ sig = SIGFPE; -+ break; -+ case VEC_FPUNDER: -+ info.si_code = FPE_FLTUND; -+ sig = SIGFPE; -+ break; -+ case VEC_FPOVER: -+ info.si_code = FPE_FLTOVF; -+ sig = SIGFPE; -+ break; -+ case VEC_ZERODIV: -+ info.si_code = FPE_INTDIV; -+ sig = SIGFPE; -+ break; -+ case VEC_CHK: -+ case VEC_TRAP: -+ info.si_code = FPE_INTOVF; -+ sig = SIGFPE; -+ break; -+ case VEC_TRACE: /* ptrace single step */ -+ info.si_code = TRAP_TRACE; -+ sig = SIGTRAP; -+ break; -+ case VEC_TRAP15: /* breakpoint */ -+ info.si_code = TRAP_BRKPT; -+ sig = SIGTRAP; -+ break; -+ default: -+ info.si_code = ILL_ILLOPC; -+ sig = SIGILL; -+ break; -+ } -+ info.si_signo = sig; -+ info.si_errno = 0; -+ switch (fp->ptregs.format) { -+ default: -+ info.si_addr = (void *) fp->ptregs.pc; -+ break; -+ case 2: -+ info.si_addr = (void *) fp->un.fmt2.iaddr; -+ break; -+ case 7: -+ info.si_addr = (void *) fp->un.fmt7.effaddr; -+ break; -+ case 9: -+ info.si_addr = (void *) fp->un.fmt9.iaddr; -+ break; -+ case 10: -+ info.si_addr = (void *) fp->un.fmta.daddr; -+ break; -+ case 11: -+ info.si_addr = (void *) fp->un.fmtb.daddr; -+ break; -+ } -+ force_sig_info(sig, &info, current); -+} -+ -+asmlinkage void set_esp0(unsigned long ssp) -+{ -+ current->thread.esp0 = ssp; -+} -+ -+/* -+ * The architecture-independent backtrace generator -+ */ -+void dump_stack(void) -+{ -+ unsigned long stack; -+ -+ show_stack(current, &stack); -+} -+EXPORT_SYMBOL(dump_stack); -+ -+#ifdef CONFIG_M68KFPU_EMU -+asmlinkage void fpemu_signal(int signal, int code, void *addr) -+{ -+ siginfo_t info; -+ -+ info.si_signo = signal; -+ info.si_errno = 0; -+ info.si_code = code; -+ info.si_addr = addr; -+ force_sig_info(signal, &info, current); -+} -+#endif ---- /dev/null -+++ b/arch/m68k/coldfire/usb/Makefile -@@ -0,0 +1,28 @@ -+# -+# Makefile for the linux kernel. -+# -+ -+# Object file lists. -+ -+ifneq ($(CONFIG_USB_EHCI_HCD),) -+ obj-y += otg_host.o -+endif -+ -+ifneq ($(CONFIG_USB_GADGET_MCF5445X),) -+ obj-y += otg_device.o -+endif -+ -+ifneq ($(strip $(CONFIG_USB_GADGET_MCF5445X) $(CONFIG_USB_EHCI_HCD)),) -+ obj-y += otg_cmn.o -+endif -+ -+ifneq ($(CONFIG_USB_OTG),) -+ obj-y += otg_otg.o -+endif -+ -+ -+# USB Transceiver driver: -+ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_MCF5445X)),) -+ obj-y += xcvr.o -+endif -+ ---- /dev/null -+++ b/arch/m68k/coldfire/usb/otg_cmn.c -@@ -0,0 +1,106 @@ -+/* -+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/err.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/io.h> -+#include <linux/irq.h> -+#include <linux/platform_device.h> -+#include <linux/delay.h> -+#include <linux/fsl_devices.h> -+#include <linux/usb/fsl_xcvr.h> -+ -+#include <asm/system.h> -+#include <asm/coldfire.h> -+ -+extern void fsl_usb_enable_clk(void); -+extern void fsl_usb_disable_clk(void); -+extern int fsl_usb_mem_init(struct platform_device *pdev); -+ -+extern struct fsl_xcvr_ops *xc_ops[]; -+ -+static int otg_used; -+ -+int usbotg_init(struct platform_device *pdev) -+{ -+ struct fsl_usb2_platform_data *pdata; -+ struct fsl_xcvr_ops *xops = xc_ops[USB_CTRLR_OTG]; -+ int rc; -+ -+ pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; -+ -+ pr_debug("%s: pdev=0x%p pdata=0x%p\n", __FUNCTION__, pdev, pdata); -+ -+ if (!xops) { -+ printk(KERN_ERR "OTG transceiver ops missing\n"); -+ return -EINVAL; -+ } -+ pdata->xcvr_ops = xops; -+ pdata->xcvr_type = xops->xcvr_type; -+ -+ if (!otg_used) { -+ /* request_mem_region and ioremap registers */ -+ rc = fsl_usb_mem_init(pdev); -+ if (rc) -+ return rc; -+ -+ fsl_usb_enable_clk(); -+ -+ if (xops->init) -+ xops->init(pdev); -+ } -+ -+ otg_used++; -+ pr_debug("%s: success\n", __FUNCTION__); -+ return 0; -+} -+ -+void usbotg_uninit(struct platform_device *pdev) -+{ -+ struct fsl_usb2_platform_data *pdata; -+ pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; -+ -+ pr_debug("%s\n", __FUNCTION__); -+ -+ otg_used--; -+ if (!otg_used) { -+ if (pdata->xcvr_ops && pdata->xcvr_ops->uninit) -+ pdata->xcvr_ops->uninit(pdev); -+ -+ iounmap(pdata->regs); -+ release_mem_region(pdata->r_start, pdata->r_len); -+ -+ pdata->regs = NULL; -+ pdata->r_start = pdata->r_len = 0; -+ -+ fsl_usb_disable_clk(); -+ } -+} -+ -+struct fsl_usb2_platform_data mxc_otg_config = { -+ .name = "OTG", -+ .platform_init = usbotg_init, -+ .platform_uninit = usbotg_uninit, -+ .es = 1, -+ .big_endian_mmio = 1, -+ .big_endian_desc = 1, -+ .le_setup_buf = 1, -+ .does_otg = 1, -+ .power_budget = 500, /* 500 mA max power */ -+ .max_ep_nr = 4, /* DDD read from a register ? */ -+ .phy_mode = FSL_USB2_PHY_ULPI, /* DDD redundant with xcvr_type */ -+}; ---- /dev/null -+++ b/arch/m68k/coldfire/usb/otg_device.c -@@ -0,0 +1,89 @@ -+/* -+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/io.h> -+#include <linux/irq.h> -+#include <linux/err.h> -+#include <linux/platform_device.h> -+#include <linux/usb/otg.h> -+#include <linux/delay.h> -+#include <linux/fsl_devices.h> -+#include <linux/usb/fsl_xcvr.h> -+ -+#include <asm/system.h> -+#include <asm/coldfire.h> -+ -+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000) -+#define INT_USB (64 + 64 + 47) /* INTC1:47 16.2.9.1 */ -+#define INT_UOCSR (64 + 64 + 53) /* INTC1:53 16.2.9.1 */ -+ -+extern int usbotg_init(struct platform_device *pdev); -+extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata); -+extern struct fsl_usb2_platform_data mxc_otg_config; -+ -+struct platform_device otg_udc_device; -+ -+/*! -+ * OTG Gadget device -+ */ -+ -+static void usb_release(struct device *dev) -+{ -+ /* normally not freed */ -+} -+ -+static u64 udc_dmamask = ~(u32) 0; -+static struct resource otg_udc_resources[] = { -+ [0] = { -+ .start = (u32) (&USB_OTGREGS_BASE), -+ .end = (u32) (&USB_OTGREGS_BASE + 0x1ff), -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = INT_USB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+ -+struct platform_device otg_udc_device = { -+ .name = "fsl-usb2-udc", -+ .id = -1, -+ .dev = { -+ .release = usb_release, -+ .dma_mask = &udc_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ .platform_data = &mxc_otg_config, -+ }, -+ .resource = otg_udc_resources, -+ .num_resources = ARRAY_SIZE(otg_udc_resources), -+}; -+ -+static int __init udc_init(void) -+{ -+ int rc __attribute((unused)); -+ -+ rc = platform_device_register(&otg_udc_device); -+ if (rc) -+ printk(KERN_ERR "usb: can't register OTG Gadget, rc=%d\n", rc); -+ else -+ printk(KERN_INFO "usb: OTG Gadget registered\n"); -+ return rc; -+} -+ -+subsys_initcall(udc_init); ---- /dev/null -+++ b/arch/m68k/coldfire/usb/otg_host.c -@@ -0,0 +1,68 @@ -+/* -+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/io.h> -+#include <linux/irq.h> -+#include <linux/err.h> -+#include <linux/platform_device.h> -+#include <linux/delay.h> -+#include <linux/fsl_devices.h> -+#include <linux/usb/fsl_xcvr.h> -+ -+#include <asm/system.h> -+#include <asm/mcfsim.h> -+ -+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000) -+#define INT_USB (64 + 64 + 47) /* INTC1:47 16.2.9.1 */ -+#define INT_UOCSR (64 + 64 + 53) /* INTC1:53 16.2.9.1 */ -+ -+struct platform_device *otg_host_device; -+ -+extern struct platform_device *host_pdev_register(struct resource *res, -+ int n_res, -+ struct fsl_usb2_platform_data -+ *config); -+ -+extern int usbotg_init(struct platform_device *pdev); -+extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata); -+extern struct fsl_usb2_platform_data mxc_otg_config; -+ -+/*! -+ * OTG host config -+ */ -+static struct resource otg_host_resources[] = { -+ [0] = { -+ .start = (u32) (&USB_OTGREGS_BASE), -+ .end = (u32) (&USB_OTGREGS_BASE + 0x1ff), -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = INT_USB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static int __init otg_host_init(void) -+{ -+ otg_host_device = host_pdev_register(otg_host_resources, -+ ARRAY_SIZE(otg_host_resources), -+ &mxc_otg_config); -+ return 0; -+} -+ -+subsys_initcall(otg_host_init); ---- /dev/null -+++ b/arch/m68k/coldfire/usb/otg_otg.c -@@ -0,0 +1,96 @@ -+/* -+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/* -+ * platform_device registration for ULPI OTG device -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/err.h> -+#include <linux/platform_device.h> -+#include <linux/fsl_devices.h> -+ -+#include <asm/mcfsim.h> -+ -+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000) -+#define INT_USB (64 + 64 + 47) /* INTC1:47 16.2.9.1 */ -+#define INT_UOCSR (64 + 64 + 53) /* INTC1:53 16.2.9.1 */ -+ -+extern int usbotg_init(struct platform_device *pdev); -+extern void usbotg_uninit(struct fsl_usb2_platform_data *pdata); -+extern struct fsl_usb2_platform_data mxc_otg_config; -+ -+static void otg_otg_release(struct device *dev) -+{ -+ /* normally not freed */ -+} -+ -+/* *INDENT-OFF* */ -+static struct resource otg_otg_resources[] = { -+ [0] = { -+ .start = (u32) (&USB_OTGREGS_BASE), -+ .end = (u32) (&USB_OTGREGS_BASE + 0x1ff), -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = INT_USB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+/*! -+ * OTG device -+ */ -+static u64 otg_otg_dmamask = ~(u32) 0; -+static struct platform_device otg_otg_device = { -+ .name = "fsl-usb2-otg", -+ .id = -1, -+ .dev = { -+ .release = otg_otg_release, -+ .dma_mask = &otg_otg_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ .platform_data = &mxc_otg_config, -+ }, -+ .resource = otg_otg_resources, -+ .num_resources = ARRAY_SIZE(otg_otg_resources), -+}; -+/* *INDENT-ON* */ -+ -+static int __init mx31_otg_otg_init(void) -+{ -+ int rc = 0; -+ -+ pr_debug("register OTG otg res=0x%p, size=%d\n", -+ otg_otg_device.resource, otg_otg_device.num_resources); -+ -+ rc = platform_device_register(&otg_otg_device); -+ if (rc) { -+ pr_debug("can't register ULPI OTG dvc, %d\n", rc); -+ } else { -+ printk(KERN_INFO "usb: OTG ULPI transceiver registered\n"); -+ pr_debug("otg_otg_device=0x%p resources=0x%p.\n", -+ &otg_otg_device, otg_otg_device.resource); -+ } -+ -+ return rc; -+} -+ -+subsys_initcall(mx31_otg_otg_init); -+ -+MODULE_AUTHOR("Freescale Semiconductor, Inc."); -+MODULE_DESCRIPTION("ULPI OTG device registration"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/arch/m68k/coldfire/usb/xcvr.c -@@ -0,0 +1,156 @@ -+/* -+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/err.h> -+#include <linux/platform_device.h> -+#include <linux/delay.h> -+#include <linux/fsl_devices.h> -+#include <linux/usb/fsl_xcvr.h> -+#include <linux/usb/fsl_usb2.h> -+ -+#include <asm/mcfsim.h> -+ -+extern void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops); -+extern void fsl_usb_xcvr_unregister(enum fsl_usb_ctrlr ctrlr); -+ -+#define MCF_SCM_BCR MCF_REG32(0xFC040024) -+#define MCF_SCM_BCR_GBR (1 << 9) /* global bursts for read */ -+#define MCF_SCM_BCR_GBW (1 << 8) /* global bursts for write */ -+#define MCF_SCM_BCR_SBE_ALL (0xff << 0) /* slave burst enable */ -+ -+ -+#ifdef ULPI_DEBUG -+void print_ulpi_regs(void) -+{ -+ pr_debug("MCF_SCM_BCR=0x%08lx MCF_CCM_MISCCR=0x%08x " -+ "MCF_GPIO_PAR_DMA=0x%08x MCF_GPIO_PAR_USB=08%08x " -+ "MCF_GPIO_PAR_FEC=08%08x\n", -+ MCF_SCM_BCR, MCF_CCM_MISCCR, MCF_GPIO_PAR_DMA, -+ MCF_GPIO_PAR_USB, MCF_GPIO_PAR_FEC); -+} -+EXPORT_SYMBOL(print_ulpi_regs); -+#endif -+ -+ -+static void xcvr_init(struct platform_device *pdev) -+{ -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ struct fsl_xcvr_ops *this = pdata->xcvr_ops; -+ struct fsl_usb_host_regs *regs = pdata->regs; -+ -+ pr_debug("%s: ctrlr=%d pdata=0x%p regs=0x%p\n", __FUNCTION__, -+ this->ctrlr, pdata, pdata->regs); -+ -+ /* enable USB read, write and slave bursts */ -+ MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL; -+ -+ /* Use external clock source if PLL isn't a multiple of 60MHz */ -+ MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_USBSRC; -+ -+ /* Initialize the USB Clock: use USB input clock */ -+ MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA & MCF_GPIO_PAR_DMA_DREQ1_MASK) | -+ MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN; -+ -+ switch (this->xcvr_type) { -+ case PORTSCX_PTS_ULPI: -+ /* Enable the required ULPI signals */ -+ MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA & -+ MCF_GPIO_PAR_DMA_DACK1_MASK) | -+ MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR; -+ -+ MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT | -+ MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP; -+ -+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & -+ MCF_GPIO_PAR_FEC_FEC0_MASK) | -+ MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI; -+ break; -+ case PORTSCX_PTS_ONCHIP: -+ /* Enable VBUS_EN and VBUS_OC signals */ -+ MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_VBUSEN | -+ MCF_GPIO_PAR_USB_VBUSOC_VBUSOC; -+ -+ /* Setup USB_VBUS_OC signal to be active-low */ -+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBOC; -+ -+ break; -+ } -+ -+ pr_debug("®s->portsc1=0x%p old portsc1=0x%x \n", ®s->portsc1, -+ regs->portsc1); -+ -+ regs->portsc1 &= ~PORTSCX_PTS_MASK; -+ regs->portsc1 |= this->xcvr_type; -+ -+ /* -+ * need to reset the controller here so that the ID pin -+ * is correctly detected. -+ */ -+ regs->usbcmd |= USB_CMD_CTRL_RESET; -+ -+ /* -+ * allow controller to reset, and leave time for -+ * the ULPI transceiver to reset too. -+ */ -+ mdelay(10); -+ -+ pr_debug("DDD %s: done. portsc1=0x%x\n", __FUNCTION__, regs->portsc1); -+} -+ -+static void xcvr_uninit(struct platform_device *pdev) -+{ -+ pr_debug("%s: pdev=0x%p\n", __FUNCTION__, pdev); -+} -+ -+ -+struct fsl_xcvr_ops xcvr_ops_otg = { -+ .ctrlr = USB_CTRLR_OTG, -+ .init = xcvr_init, -+ .uninit = xcvr_uninit, -+ -+#ifdef CONFIG_USB_M5445X_ULPI -+ .xcvr_type = PORTSCX_PTS_ULPI, -+#elif defined CONFIG_USB_M5445X_FSLS -+ .xcvr_type = PORTSCX_PTS_ONCHIP, -+#else -+#error "Invalid USB transceiver selection." -+#endif -+}; -+ -+static int __init usb_xcvr_init(void) -+{ -+ pr_debug("%s\n", __FUNCTION__); -+ -+ fsl_usb_xcvr_register(&xcvr_ops_otg); -+ -+ pr_debug("%s done\n", __FUNCTION__); -+ return 0; -+} -+ -+static void __exit usb_xcvr_exit(void) -+{ -+ fsl_usb_xcvr_unregister(USB_CTRLR_OTG); -+} -+ -+module_init(usb_xcvr_init); -+module_exit(usb_xcvr_exit); -+ -+MODULE_AUTHOR("Freescale Semiconductor, Inc."); -+MODULE_DESCRIPTION("External ULPI xcvr driver"); -+MODULE_LICENSE("GPL"); -+ ---- /dev/null -+++ b/arch/m68k/coldfire/usb.c -@@ -0,0 +1,182 @@ -+/* -+ * -+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ * -+ * otg_{get,set}_transceiver() are from arm/plat-omap/usb.c. -+ * which is Copyright (C) 2004 Texas Instruments, Inc. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/io.h> -+#include <linux/err.h> -+#include <linux/platform_device.h> -+#include <linux/usb/otg.h> -+#include <linux/delay.h> -+#include <linux/fsl_devices.h> -+#include <linux/usb/fsl_xcvr.h> -+ -+ -+/* The dmamask must be set for EHCI to work */ -+static u64 ehci_dmamask = ~(u32) 0; -+ -+struct fsl_xcvr_ops *xc_ops[3] = { NULL }; -+ -+void fsl_usb_enable_clk(void) -+{ -+} -+EXPORT_SYMBOL(fsl_usb_enable_clk); -+ -+void fsl_usb_disable_clk(void) -+{ -+} -+EXPORT_SYMBOL(fsl_usb_disable_clk); -+ -+void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops) -+{ -+ pr_debug("%s ctrlr=%d\n", __FUNCTION__, xcvr_ops->ctrlr); -+ xc_ops[xcvr_ops->ctrlr] = xcvr_ops; -+ -+} -+EXPORT_SYMBOL(fsl_usb_xcvr_register); -+ -+void fsl_usb_xcvr_unregister(enum fsl_usb_ctrlr ctrlr) -+{ -+ pr_debug("%s ctrlr=%d\n", __FUNCTION__, ctrlr); -+ xc_ops[ctrlr] = NULL; -+} -+EXPORT_SYMBOL(fsl_usb_xcvr_unregister); -+ -+/*! -+ * Register an instance of a USB host platform device. -+ * -+ * @param res: resource pointer -+ * @param n_res: number of resources -+ * @param config: config pointer -+ * -+ * @return newly-registered platform_device -+ * -+ * DDD fix this comment: -+ * The USB controller supports 3 host interfaces, and the -+ * kernel can be configured to support some number of them. -+ * Each supported host interface is registered as an instance -+ * of the "fsl-ehci" device. Call this function multiple times -+ * to register each host interface. -+ */ -+static int instance_id; -+struct platform_device *host_pdev_register(struct resource *res, int n_res, -+ struct fsl_usb2_platform_data *config) -+{ -+ struct platform_device *pdev; -+ -+ pr_debug("register host res=0x%p, size=%d\n", res, n_res); -+ -+ pdev = platform_device_register_simple("fsl-ehci", -+ instance_id, res, n_res); -+ if (IS_ERR(pdev)) { -+ printk(KERN_ERR "usb: can't register %s Host, %ld\n", -+ config->name, PTR_ERR(pdev)); -+ return NULL; -+ } -+ -+ pdev->dev.coherent_dma_mask = 0xffffffff; -+ pdev->dev.dma_mask = &ehci_dmamask; -+ -+ /* -+ * platform_device_add_data() makes a copy of -+ * the platform_data passed in. That makes it -+ * impossible to share the same config struct for -+ * all OTG devices (host,gadget,otg). So, just -+ * set the platform_data pointer ourselves. -+ */ -+ pdev->dev.platform_data = config; -+ -+ printk(KERN_INFO "usb: %s Host registered\n", config->name); -+ pr_debug("pdev=0x%p dev=0x%p resources=0x%p pdata=0x%p\n", -+ pdev, &pdev->dev, pdev->resource, pdev->dev.platform_data); -+ -+ instance_id++; -+ -+ return pdev; -+} -+ -+ -+int fsl_usb_mem_init(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct fsl_usb2_platform_data *pdata; -+ -+ pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; -+ -+ pr_debug("%s: pdev=0x%p pdata=0x%p\n", __FUNCTION__, pdev, pdata); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no MEM resource.\n"); -+ return -ENODEV; -+ } -+ -+ pdata->r_start = res->start; -+ pdata->r_len = res->end - res->start + 1; -+ pr_debug("%s: MEM resource start=0x%x len=0x%x\n", pdata->name, -+ res->start, pdata->r_len); -+ -+ if (!request_mem_region(pdata->r_start, pdata->r_len, "OTG")) { -+ dev_err(&pdev->dev, "request_mem_region failed\n"); -+ return -EBUSY; -+ } -+ pdata->regs = ioremap(pdata->r_start, pdata->r_len); -+ pr_debug("ioremapped to 0x%p\n", pdata->regs); -+ -+ if (pdata->regs == NULL) { -+ dev_err(&pdev->dev, "ioremap failed\n"); -+ release_mem_region(pdata->r_start, pdata->r_len); -+ return -EFAULT; -+ } -+ -+ pr_debug("%s: success\n", __FUNCTION__); -+ return 0; -+} -+ -+ -+#if defined(CONFIG_USB_OTG) -+static struct otg_transceiver *xceiv; -+ -+/** -+ * otg_get_transceiver - find the (single) OTG transceiver driver -+ * -+ * Returns the transceiver driver, after getting a refcount to it; or -+ * null if there is no such transceiver. The caller is responsible for -+ * releasing that count. -+ */ -+struct otg_transceiver *otg_get_transceiver(void) -+{ -+ pr_debug("%s xceiv=0x%p\n", __FUNCTION__, xceiv); -+ if (xceiv) -+ get_device(xceiv->dev); -+ return xceiv; -+} -+EXPORT_SYMBOL(otg_get_transceiver); -+ -+int otg_set_transceiver(struct otg_transceiver *x) -+{ -+ pr_debug("%s xceiv=0x%p x=0x%p\n", __FUNCTION__, xceiv, x); -+ if (xceiv && x) -+ return -EBUSY; -+ xceiv = x; -+ return 0; -+} -+EXPORT_SYMBOL(otg_set_transceiver); -+#endif ---- /dev/null -+++ b/arch/m68k/coldfire/vmlinux-cf.lds -@@ -0,0 +1,130 @@ -+/* ld script to make m68k Coldfire Linux kernel -+ * -+ * Derived from arch/m68k/kernel/vmlinux-std.lds -+ * -+ * Updated 11/26/2007 for new CodeSourcery toolset -+ * by Kurt Mahan <kmahan@freescale.com> -+ */ -+ -+#define LOAD_OFFSET 0x00000000 -+ -+#include <asm-generic/vmlinux.lds.h> -+#include <asm/page_offset.h> -+ -+#define START_OFFSET 0x00020000 -+#define IMAGE_START PAGE_OFFSET_RAW + START_OFFSET -+ -+OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k") -+OUTPUT_ARCH(m68k) -+ENTRY(_stext) -+jiffies = jiffies_64 + 4; -+ -+SECTIONS -+{ -+ . = IMAGE_START; -+ .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { -+ _text = .; /* Text and read-only data */ -+ *(.text.head) -+ } :text = 0x4e75 -+ -+ .text : AT(ADDR(.text) - LOAD_OFFSET) { -+ TEXT_TEXT -+ SCHED_TEXT -+ LOCK_TEXT -+ *(.fixup) -+ *(.gnu.warning) -+ } :text = 0x4e75 -+ _etext = .; /* End of text section */ -+ -+ . = ALIGN(16); -+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { -+ __start___ex_table = .; -+ *(__ex_table) -+ __stop___ex_table = .; -+ } -+ -+ RODATA -+ -+ . = ALIGN(8192); -+ .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ -+ DATA_DATA -+ CONSTRUCTORS -+ } :data -+ -+ -+ . = ALIGN(16); -+ .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET ) { -+ *(.data.cacheline_aligned) -+ } :data -+ -+ _edata = .; /* End of data section */ -+ -+ NOTES /* support ld --build-id */ -+ -+ . = ALIGN(8192); /* Initrd */ -+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { -+ __init_begin = .; -+ _sinittext = .; -+ *(.init.text) -+ _einittext = .; -+ } -+ -+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { -+ *(.init.data) -+ } -+ -+ . = ALIGN(16); -+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { -+ __setup_start = .; -+ *(.init.setup) -+ __setup_end = .; -+ } -+ -+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { -+ __initcall_start = .; -+ INITCALLS -+ __initcall_end = .; -+ } -+ -+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { -+ __con_initcall_start = .; -+ *(.con_initcall.init) -+ __con_initcall_end = .; -+ } -+ -+ SECURITY_INIT -+ -+#ifdef CONFIG_BLK_DEV_INITRD -+ . = ALIGN(8192); -+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { -+ __initramfs_start = .; -+ *(.init.ramfs) -+ __initramfs_end = .; -+ } -+#endif -+ -+ . = ALIGN(8192); -+ __init_end = .; -+ -+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { -+ *(.data.init_task) /* The initial task and kernel stack */ -+ } -+ -+ _sbss = .; -+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) { /* BSS */ -+ *(.bss) -+ } -+ _ebss = .; -+ -+ _end = . ; -+ -+ /* Sections to be discarded */ -+ /DISCARD/ : { -+ *(.exit.text) -+ *(.exit.data) -+ *(.exitcall.exit) -+ } -+ -+ /* Stabs debugging sections. */ -+ STABS_DEBUG -+} ---- /dev/null -+++ b/arch/m68k/configs/55_defconfig -@@ -0,0 +1,830 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.25 -+# Thu Jun 26 16:17:41 2008 -+# -+CONFIG_M68K=y -+CONFIG_MMU=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_TIME_LOW_RES=y -+CONFIG_GENERIC_IOMAP=y -+# CONFIG_NO_IOPORT is not set -+# CONFIG_NO_DMA is not set -+CONFIG_ARCH_SUPPORTS_AOUT=y -+CONFIG_HZ=100 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+CONFIG_LOCALVERSION_AUTO=y -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=17 -+# CONFIG_CGROUPS is not set -+CONFIG_GROUP_SCHED=y -+CONFIG_FAIR_GROUP_SCHED=y -+# CONFIG_RT_GROUP_SCHED is not set -+CONFIG_USER_SCHED=y -+# CONFIG_CGROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+CONFIG_NAMESPACES=y -+# CONFIG_UTS_NS is not set -+# CONFIG_IPC_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_BLK_DEV_INITRD is not set -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_COMPAT_BRK=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+# CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set -+# CONFIG_HAVE_OPROFILE is not set -+# CONFIG_HAVE_KPROBES is not set -+# CONFIG_HAVE_KRETPROBES is not set -+CONFIG_PROC_PAGE_MONITOR=y -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+# CONFIG_KMOD is not set -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+ -+# -+# Platform dependent setup -+# -+# CONFIG_SUN3 is not set -+CONFIG_COLDFIRE=y -+CONFIG_CFV4E=y -+# CONFIG_AMIGA is not set -+# CONFIG_ATARI is not set -+# CONFIG_PCI is not set -+# CONFIG_MAC is not set -+# CONFIG_APOLLO is not set -+# CONFIG_VME is not set -+# CONFIG_HP300 is not set -+# CONFIG_SUN3X is not set -+# CONFIG_Q40 is not set -+ -+# -+# Processor type -+# -+# CONFIG_M68020 is not set -+# CONFIG_M68030 is not set -+# CONFIG_M68040 is not set -+# CONFIG_M68060 is not set -+CONFIG_M5445X=y -+# CONFIG_M54451 is not set -+CONFIG_M54455=y -+# CONFIG_M54451EVB is not set -+CONFIG_M54455EVB=y -+# CONFIG_M547X_8X is not set -+CONFIG_MCFCLK=266666666 -+# CONFIG_MCF_USER_HALT is not set -+CONFIG_MMU_CFV4E=y -+CONFIG_SDRAM_BASE=0x40000000 -+CONFIG_SDRAM_SIZE=0x10000000 -+CONFIG_NOR_FLASH_BASE=0x00000000 -+# CONFIG_M68KFPU_EMU is not set -+CONFIG_ADVANCED=y -+# CONFIG_RMW_INSNS is not set -+CONFIG_SINGLE_MEMORY_CHUNK=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_NEED_MULTIPLE_NODES=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+ -+# -+# General setup -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+CONFIG_PROC_HARDWARE=y -+CONFIG_ZONE_DMA=y -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_NET_KEY=y -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_MULTIPLE_TABLES is not set -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+CONFIG_INET_AH=y -+CONFIG_INET_ESP=y -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+# CONFIG_STANDALONE is not set -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+# CONFIG_MTD is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=64000 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_COLDFIRE_SEC is not set -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_ENCLOSURE_SERVICES is not set -+CONFIG_HAVE_IDE=y -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+CONFIG_FEC=y -+# CONFIG_FEC2 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+CONFIG_SERIO_SERPORT=y -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_COLDFIRE=y -+# CONFIG_SERIAL_MCF is not set -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_GEN_RTC is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_MCF548x is not set -+CONFIG_I2C_MCF=y -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+# CONFIG_SPI is not set -+# CONFIG_COLDFIRE_EDMA is not set -+# CONFIG_SPI_MASTER is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_WATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+CONFIG_VIDEO_OUTPUT_CONTROL=m -+# CONFIG_FB is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+# CONFIG_HID_SUPPORT is not set -+# CONFIG_USB_SUPPORT is not set -+# CONFIG_MMC is not set -+# CONFIG_MEMSTICK is not set -+# CONFIG_NEW_LEDS is not set -+# CONFIG_RTC_CLASS is not set -+ -+# -+# Userspace I/O -+# -+# CONFIG_UIO is not set -+ -+# -+# Character devices -+# -+# CONFIG_SERIAL_CONSOLE is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+# CONFIG_EXT3_FS_POSIX_ACL is not set -+# CONFIG_EXT3_FS_SECURITY is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+CONFIG_DNOTIFY=y -+# CONFIG_INOTIFY is not set -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+CONFIG_NTFS_FS=y -+# CONFIG_NTFS_DEBUG is not set -+CONFIG_NTFS_RW=y -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+# CONFIG_PROC_KCORE is not set -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+CONFIG_MINIX_FS=y -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+# CONFIG_NFS_V3 is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_NFSD is not set -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_BIND34 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_KARMA_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_SYSV68_PARTITION is not set -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+# CONFIG_ENABLE_MUST_CHECK is not set -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+CONFIG_DEBUG_SLAB=y -+# CONFIG_DEBUG_SLAB_LEAK is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+# CONFIG_FRAME_POINTER is not set -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+CONFIG_BOOTPARAM=y -+CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe ip=172.27.155.55:172.27.155.1:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)" -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+# CONFIG_CRYPTO_SEQIV is not set -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+# CONFIG_CRYPTO_XCBC is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_WP512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+CONFIG_CRYPTO_ECB=y -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_PCBC=m -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_DEFLATE is not set -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+CONFIG_CRYPTO_TEST=m -+CONFIG_CRYPTO_AUTHENC=y -+# CONFIG_CRYPTO_LZO is not set -+CONFIG_CRYPTO_HW=y -+# CONFIG_CRYPTO_DEV_MCFCAU is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=y -+CONFIG_CRC16=y -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y ---- /dev/null -+++ b/arch/m68k/configs/m54455evb_defconfig -@@ -0,0 +1,1037 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.23 -+# Thu Dec 6 12:14:18 2007 -+# -+CONFIG_M68K=y -+CONFIG_MMU=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_TIME_LOW_RES=y -+CONFIG_GENERIC_IOMAP=y -+CONFIG_NO_IOPORT=y -+# CONFIG_NO_DMA is not set -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+CONFIG_LOCALVERSION_AUTO=y -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=17 -+CONFIG_SYSFS_DEPRECATED=y -+# CONFIG_RELAY is not set -+# CONFIG_BLK_DEV_INITRD is not set -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+# CONFIG_KMOD is not set -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+ -+# -+# Platform dependent setup -+# -+# CONFIG_SUN3 is not set -+CONFIG_COLDFIRE=y -+CONFIG_CFV4E=y -+# CONFIG_AMIGA is not set -+# CONFIG_ATARI is not set -+# CONFIG_MAC is not set -+# CONFIG_APOLLO is not set -+# CONFIG_VME is not set -+# CONFIG_HP300 is not set -+# CONFIG_SUN3X is not set -+# CONFIG_Q40 is not set -+ -+# -+# Processor type -+# -+# CONFIG_M68020 is not set -+# CONFIG_M68030 is not set -+# CONFIG_M68040 is not set -+# CONFIG_M68060 is not set -+CONFIG_M54455=y -+CONFIG_MCFCLK=266666666 -+# CONFIG_MCF_USER_HALT is not set -+CONFIG_MMU_CFV4E=y -+CONFIG_SDRAM_BASE=0x40000000 -+CONFIG_SDRAM_SIZE=0x0FFFFFFF -+CONFIG_NOR_FLASH_BASE=0x00000000 -+# CONFIG_M68KFPU_EMU is not set -+CONFIG_ADVANCED=y -+# CONFIG_RMW_INSNS is not set -+CONFIG_SINGLE_MEMORY_CHUNK=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_NEED_MULTIPLE_NODES=y -+# CONFIG_SPARSEMEM_STATIC is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+ -+# -+# General setup -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+CONFIG_PROC_HARDWARE=y -+CONFIG_ZONE_DMA=y -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+CONFIG_NET_KEY=y -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_MULTIPLE_TABLES is not set -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+CONFIG_INET_AH=y -+CONFIG_INET_ESP=y -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+# CONFIG_STANDALONE is not set -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+CONFIG_MTD_DEBUG=y -+CONFIG_MTD_DEBUG_VERBOSE=0 -+CONFIG_MTD_CONCAT=y -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+CONFIG_MTD_CFI_ADV_OPTIONS=y -+CONFIG_MTD_CFI_NOSWAP=y -+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -+CONFIG_MTD_CFI_GEOMETRY=y -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+# CONFIG_MTD_CFI_I2 is not set -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_OTP is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x00000000 -+CONFIG_MTD_PHYSMAP_LEN=0x1000000 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=64000 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+CONFIG_ATA=m -+# CONFIG_ATA_NONSTANDARD is not set -+CONFIG_PATA_FSL=m -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+CONFIG_FEC=y -+# CONFIG_FEC2 is not set -+CONFIG_NETDEV_1000=y -+CONFIG_NETDEV_10000=y -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET_MII=m -+CONFIG_USB_USBNET=m -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+# CONFIG_USB_NET_DM9601 is not set -+# CONFIG_USB_NET_GL620A is not set -+# CONFIG_USB_NET_NET1080 is not set -+# CONFIG_USB_NET_PLUSB is not set -+# CONFIG_USB_NET_MCS7830 is not set -+# CONFIG_USB_NET_RNDIS_HOST is not set -+# CONFIG_USB_NET_CDC_SUBSET is not set -+# CONFIG_USB_NET_ZAURUS is not set -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_TSDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+CONFIG_SERIO_SERPORT=y -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_COLDFIRE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_WATCHDOG is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_GEN_RTC is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+# CONFIG_I2C is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_COLDFIRE_EDMA=y -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+# CONFIG_SPI_BITBANG is not set -+CONFIG_SPI_COLDFIRE=y -+CONFIG_SPI_COLDFIRE_DSPI_EDMA=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_SPI_COLDFIRE_SSI_AUDIO=y -+# CONFIG_SSIAUDIO_USE_EDMA is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+# CONFIG_VGASTATE is not set -+CONFIG_VIDEO_OUTPUT_CONTROL=m -+# CONFIG_FB is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+CONFIG_HID_DEBUG=y -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=y -+# CONFIG_USB_HIDINPUT_POWERBOOK is not set -+# CONFIG_HID_FF is not set -+# CONFIG_USB_HIDDEV is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+# CONFIG_USB_ARCH_HAS_OHCI is not set -+CONFIG_USB_ARCH_HAS_EHCI=y -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_DEVICE_CLASS is not set -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+CONFIG_USB_EHCI_HCD=m -+CONFIG_USB_EHCI_SPLIT_ISO=y -+CONFIG_USB_EHCI_ROOT_HUB_TT=y -+# CONFIG_USB_EHCI_TT_NEWSCHED is not set -+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y -+# CONFIG_USB_ISP116X_HCD is not set -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+CONFIG_USB_M5445X_ULPI=y -+# CONFIG_USB_M5445X_FSLS is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_ONETOUCH is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+# CONFIG_USB_LIBUSUAL is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_SISUSBVGA is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=m -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+CONFIG_USB_GADGET_MCF5445X=y -+CONFIG_USB_MCF5445X=m -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+# CONFIG_USB_G_SERIAL is not set -+# CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_MMC is not set -+# CONFIG_NEW_LEDS is not set -+# CONFIG_RTC_CLASS is not set -+ -+# -+# DMA Engine support -+# -+# CONFIG_DMA_ENGINE is not set -+ -+# -+# DMA Clients -+# -+ -+# -+# DMA Devices -+# -+ -+# -+# Userspace I/O -+# -+# CONFIG_UIO is not set -+ -+# -+# Character devices -+# -+# CONFIG_SERIAL_CONSOLE is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+# CONFIG_EXT3_FS_POSIX_ACL is not set -+# CONFIG_EXT3_FS_SECURITY is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+CONFIG_MINIX_FS=y -+# CONFIG_ROMFS_FS is not set -+# CONFIG_INOTIFY is not set -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+CONFIG_NTFS_FS=y -+# CONFIG_NTFS_DEBUG is not set -+CONFIG_NTFS_RW=y -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+# CONFIG_PROC_KCORE is not set -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+CONFIG_NFS_FS=y -+# CONFIG_NFS_V3 is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_NFSD is not set -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_BIND34 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_KARMA_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_SYSV68_PARTITION is not set -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+ -+# -+# Distributed Lock Manager -+# -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+# CONFIG_ENABLE_MUST_CHECK is not set -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+CONFIG_DEBUG_SLAB=y -+# CONFIG_DEBUG_SLAB_LEAK is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_FRAME_POINTER is not set -+CONFIG_FORCED_INLINING=y -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+CONFIG_BOOTPARAM=y -+CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe ip=172.27.155.55:172.27.155.1:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)" -+ -+# -+# CodeTEST Setup -+# -+# CONFIG_CODETEST is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+# CONFIG_CRYPTO_XCBC is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_WP512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+CONFIG_CRYPTO_ECB=y -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_PCBC=m -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_DEFLATE is not set -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+CONFIG_CRYPTO_TEST=m -+CONFIG_CRYPTO_HW=y -+CONFIG_CRYPTO_DEV_MCFCAU=y -+CONFIG_CRYPTO_DEV_MCFCAU_DES=y -+CONFIG_CRYPTO_DEV_MCFCAU_AES=y -+CONFIG_CRYPTO_DEV_MCFCAU_MD5=y -+CONFIG_CRYPTO_DEV_MCFCAU_SHA1=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=y -+CONFIG_CRC16=y -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=y -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_DMA=y ---- /dev/null -+++ b/arch/m68k/configs/m5475evb_defconfig -@@ -0,0 +1,954 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.25 -+# Wed Jul 9 16:09:19 2008 -+# -+CONFIG_M68K=y -+CONFIG_MMU=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_TIME_LOW_RES=y -+CONFIG_GENERIC_IOMAP=y -+# CONFIG_NO_IOPORT is not set -+# CONFIG_NO_DMA is not set -+CONFIG_ARCH_SUPPORTS_AOUT=y -+CONFIG_HZ=100 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+CONFIG_LOCALVERSION_AUTO=y -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=17 -+# CONFIG_CGROUPS is not set -+CONFIG_GROUP_SCHED=y -+CONFIG_FAIR_GROUP_SCHED=y -+# CONFIG_RT_GROUP_SCHED is not set -+CONFIG_USER_SCHED=y -+# CONFIG_CGROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+CONFIG_NAMESPACES=y -+# CONFIG_UTS_NS is not set -+# CONFIG_IPC_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_BLK_DEV_INITRD is not set -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_COMPAT_BRK=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+# CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set -+# CONFIG_HAVE_OPROFILE is not set -+# CONFIG_HAVE_KPROBES is not set -+# CONFIG_HAVE_KRETPROBES is not set -+CONFIG_PROC_PAGE_MONITOR=y -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+# CONFIG_KMOD is not set -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+ -+# -+# Platform dependent setup -+# -+# CONFIG_SUN3 is not set -+CONFIG_COLDFIRE=y -+CONFIG_CFV4E=y -+CONFIG_MCD_DMA=y -+# CONFIG_AMIGA is not set -+# CONFIG_ATARI is not set -+CONFIG_PCI=y -+# CONFIG_MAC is not set -+# CONFIG_APOLLO is not set -+# CONFIG_VME is not set -+# CONFIG_HP300 is not set -+# CONFIG_SUN3X is not set -+# CONFIG_Q40 is not set -+ -+# -+# Processor type -+# -+# CONFIG_M68020 is not set -+# CONFIG_M68030 is not set -+# CONFIG_M68040 is not set -+# CONFIG_M68060 is not set -+# CONFIG_M5445X is not set -+CONFIG_M547X_8X=y -+CONFIG_M547X=y -+# CONFIG_M548X is not set -+# CONFIG_M5475AFE is not set -+# CONFIG_M5475BFE is not set -+CONFIG_M5475CFE=y -+# CONFIG_M5475DFE is not set -+# CONFIG_M5475EFE is not set -+# CONFIG_M5475FFE is not set -+# CONFIG_M5485AFE is not set -+# CONFIG_M5485BFE is not set -+# CONFIG_M5485CFE is not set -+# CONFIG_M5485DFE is not set -+# CONFIG_M5485EFE is not set -+# CONFIG_M5485FFE is not set -+CONFIG_MCFCLK=266000000 -+# CONFIG_MCF_USER_HALT is not set -+CONFIG_MMU_CFV4E=y -+CONFIG_SDRAM_BASE=0x00000000 -+CONFIG_SDRAM_SIZE=0x04000000 -+CONFIG_NOR_FLASH_BASE=0xE0000000 -+# CONFIG_M68KFPU_EMU is not set -+CONFIG_ADVANCED=y -+# CONFIG_RMW_INSNS is not set -+CONFIG_SINGLE_MEMORY_CHUNK=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_NEED_MULTIPLE_NODES=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+ -+# -+# General setup -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+CONFIG_PROC_HARDWARE=y -+CONFIG_ZONE_DMA=y -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+CONFIG_PCI_LEGACY=y -+# CONFIG_PCI_DEBUG is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_NET_KEY=y -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_MULTIPLE_TABLES is not set -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+CONFIG_INET_AH=y -+CONFIG_INET_ESP=y -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+CONFIG_CAN=y -+CONFIG_CAN_RAW=y -+# CONFIG_CAN_BCM is not set -+ -+# -+# CAN Device Drivers -+# -+# CONFIG_CAN_VCAN is not set -+CONFIG_CAN_FLEXCAN=y -+CONFIG_CAN_MCF547X_8X=y -+# CONFIG_CAN_DEBUG_DEVICES is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+# CONFIG_STANDALONE is not set -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+ -+# -+# User Modules And Translation Layers -+# -+# CONFIG_MTD_CHAR is not set -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+# CONFIG_MTD_CFI is not set -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_RAM=y -+CONFIG_MTD_ROM=y -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+# CONFIG_MTD_PHYSMAP is not set -+# CONFIG_MTD_INTEL_VR_NOR is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_PMC551 is not set -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_CPQ_DA is not set -+# CONFIG_BLK_CPQ_CISS_DA is not set -+# CONFIG_BLK_DEV_DAC960 is not set -+# CONFIG_BLK_DEV_UMEM is not set -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_SX8 is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=64000 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+CONFIG_COLDFIRE_SEC=y -+CONFIG_SEC_DEVICE=y -+# CONFIG_PHANTOM is not set -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_SGI_IOC4 is not set -+# CONFIG_TIFM_CORE is not set -+# CONFIG_ENCLOSURE_SERVICES is not set -+CONFIG_HAVE_IDE=y -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+# CONFIG_SCSI_LOWLEVEL is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+# CONFIG_FUSION is not set -+ -+# -+# IEEE 1394 (FireWire) support -+# -+# CONFIG_FIREWIRE is not set -+# CONFIG_IEEE1394 is not set -+# CONFIG_I2O is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+# CONFIG_ARCNET is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+CONFIG_FEC_548x=y -+CONFIG_FEC_548x_AUTO_NEGOTIATION=y -+# CONFIG_FEC_548x_ENABLE_FEC2 is not set -+# CONFIG_HAPPYMEAL is not set -+# CONFIG_SUNGEM is not set -+# CONFIG_CASSINI is not set -+# CONFIG_NET_VENDOR_3COM is not set -+# CONFIG_ENC28J60 is not set -+# CONFIG_NET_TULIP is not set -+# CONFIG_HP100 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_NET_PCI is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+# CONFIG_TR is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_WAN is not set -+# CONFIG_FDDI is not set -+# CONFIG_HIPPI is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_NET_FC is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+CONFIG_SERIO_SERPORT=y -+# CONFIG_SERIO_PCIPS2 is not set -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+# CONFIG_NOZOMI is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_COLDFIRE=y -+CONFIG_SERIAL_COLDFIRE_IRDA=y -+# CONFIG_SERIAL_MCF is not set -+# CONFIG_SERIAL_JSM is not set -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_GEN_RTC is not set -+# CONFIG_R3964 is not set -+# CONFIG_APPLICOM is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+# CONFIG_I2C is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+CONFIG_SPI_DEBUG=y -+# CONFIG_COLDFIRE_EDMA is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+# CONFIG_SPI_BITBANG is not set -+CONFIG_SPI_COLDFIRE=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_SPI_COLDFIRE_SSI_AUDIO is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_COLDFIRE_WATCHDOG=m -+ -+# -+# PCI-based Watchdog Cards -+# -+# CONFIG_PCIPCWATCHDOG is not set -+# CONFIG_WDTPCI is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+ -+# -+# Graphics support -+# -+# CONFIG_DRM is not set -+# CONFIG_VGASTATE is not set -+CONFIG_VIDEO_OUTPUT_CONTROL=m -+# CONFIG_FB is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+CONFIG_HID_DEBUG=y -+# CONFIG_HIDRAW is not set -+# CONFIG_USB_SUPPORT is not set -+# CONFIG_MMC is not set -+# CONFIG_MEMSTICK is not set -+# CONFIG_NEW_LEDS is not set -+# CONFIG_INFINIBAND is not set -+# CONFIG_RTC_CLASS is not set -+ -+# -+# Userspace I/O -+# -+# CONFIG_UIO is not set -+ -+# -+# Character devices -+# -+# CONFIG_SERIAL_CONSOLE is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+# CONFIG_EXT3_FS_POSIX_ACL is not set -+# CONFIG_EXT3_FS_SECURITY is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+CONFIG_DNOTIFY=y -+# CONFIG_INOTIFY is not set -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+CONFIG_NTFS_FS=y -+# CONFIG_NTFS_DEBUG is not set -+CONFIG_NTFS_RW=y -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+# CONFIG_PROC_KCORE is not set -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+# CONFIG_JFFS2_FS is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+CONFIG_MINIX_FS=y -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+CONFIG_ROMFS_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+# CONFIG_NFS_V3 is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_NFSD is not set -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_BIND34 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_KARMA_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_SYSV68_PARTITION is not set -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+# CONFIG_ENABLE_MUST_CHECK is not set -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+CONFIG_DEBUG_SLAB=y -+# CONFIG_DEBUG_SLAB_LEAK is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+# CONFIG_FRAME_POINTER is not set -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+CONFIG_BOOTPARAM=y -+CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)" -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+# CONFIG_CRYPTO_SEQIV is not set -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+# CONFIG_CRYPTO_XCBC is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_WP512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_ECB is not set -+CONFIG_CRYPTO_CBC=y -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_DEFLATE is not set -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+CONFIG_CRYPTO_TEST=m -+CONFIG_CRYPTO_AUTHENC=y -+# CONFIG_CRYPTO_LZO is not set -+# CONFIG_CRYPTO_HW is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=y -+CONFIG_CRC16=y -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y ---- /dev/null -+++ b/arch/m68k/configs/m5485evb_defconfig -@@ -0,0 +1,859 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.25 -+# Thu Jul 10 16:12:53 2008 -+# -+CONFIG_M68K=y -+CONFIG_MMU=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_TIME_LOW_RES=y -+CONFIG_GENERIC_IOMAP=y -+# CONFIG_NO_IOPORT is not set -+# CONFIG_NO_DMA is not set -+CONFIG_ARCH_SUPPORTS_AOUT=y -+CONFIG_HZ=100 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+CONFIG_LOCALVERSION_AUTO=y -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=17 -+# CONFIG_CGROUPS is not set -+CONFIG_GROUP_SCHED=y -+CONFIG_FAIR_GROUP_SCHED=y -+# CONFIG_RT_GROUP_SCHED is not set -+CONFIG_USER_SCHED=y -+# CONFIG_CGROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+CONFIG_NAMESPACES=y -+# CONFIG_UTS_NS is not set -+# CONFIG_IPC_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_BLK_DEV_INITRD is not set -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_COMPAT_BRK=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+# CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set -+# CONFIG_HAVE_OPROFILE is not set -+# CONFIG_HAVE_KPROBES is not set -+# CONFIG_HAVE_KRETPROBES is not set -+CONFIG_PROC_PAGE_MONITOR=y -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+# CONFIG_KMOD is not set -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+ -+# -+# Platform dependent setup -+# -+# CONFIG_SUN3 is not set -+CONFIG_COLDFIRE=y -+CONFIG_CFV4E=y -+CONFIG_MCD_DMA=y -+# CONFIG_AMIGA is not set -+# CONFIG_ATARI is not set -+# CONFIG_MAC is not set -+# CONFIG_APOLLO is not set -+# CONFIG_VME is not set -+# CONFIG_HP300 is not set -+# CONFIG_SUN3X is not set -+# CONFIG_Q40 is not set -+ -+# -+# Processor type -+# -+# CONFIG_M68020 is not set -+# CONFIG_M68030 is not set -+# CONFIG_M68040 is not set -+# CONFIG_M68060 is not set -+# CONFIG_M5445X is not set -+CONFIG_M547X_8X=y -+# CONFIG_M547X is not set -+CONFIG_M548X=y -+# CONFIG_M5475AFE is not set -+# CONFIG_M5475BFE is not set -+# CONFIG_M5475CFE is not set -+# CONFIG_M5475DFE is not set -+# CONFIG_M5475EFE is not set -+# CONFIG_M5475FFE is not set -+# CONFIG_M5485AFE is not set -+# CONFIG_M5485BFE is not set -+CONFIG_M5485CFE=y -+# CONFIG_M5485DFE is not set -+# CONFIG_M5485EFE is not set -+# CONFIG_M5485FFE is not set -+CONFIG_MCFCLK=200000000 -+# CONFIG_MCF_USER_HALT is not set -+CONFIG_MMU_CFV4E=y -+CONFIG_SDRAM_BASE=0x00000000 -+CONFIG_SDRAM_SIZE=0x04000000 -+CONFIG_NOR_FLASH_BASE=0xE0000000 -+# CONFIG_M68KFPU_EMU is not set -+CONFIG_ADVANCED=y -+# CONFIG_RMW_INSNS is not set -+CONFIG_SINGLE_MEMORY_CHUNK=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_NEED_MULTIPLE_NODES=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+ -+# -+# General setup -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+CONFIG_PROC_HARDWARE=y -+CONFIG_ZONE_DMA=y -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_NET_KEY=y -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_MULTIPLE_TABLES is not set -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+CONFIG_INET_AH=y -+CONFIG_INET_ESP=y -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -+# CONFIG_INET_XFRM_MODE_TUNNEL is not set -+# CONFIG_INET_XFRM_MODE_BEET is not set -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IPV6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+# CONFIG_STANDALONE is not set -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+# CONFIG_MTD is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=64000 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+CONFIG_COLDFIRE_SEC=y -+CONFIG_SEC_DEVICE=y -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_ENCLOSURE_SERVICES is not set -+CONFIG_HAVE_IDE=y -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+# CONFIG_BLK_DEV_SR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+# CONFIG_SCSI_LOWLEVEL is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+CONFIG_FEC_548x=y -+CONFIG_FEC_548x_AUTO_NEGOTIATION=y -+# CONFIG_FEC_548x_ENABLE_FEC2 is not set -+# CONFIG_ENC28J60 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+CONFIG_SERIO_SERPORT=y -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_COLDFIRE=y -+# CONFIG_SERIAL_COLDFIRE_IRDA is not set -+# CONFIG_SERIAL_MCF is not set -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_GEN_RTC is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+# CONFIG_I2C_CHARDEV is not set -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+CONFIG_I2C_MCF548x=y -+# CONFIG_I2C_MCF is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+CONFIG_SPI_DEBUG=y -+# CONFIG_COLDFIRE_EDMA is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+# CONFIG_SPI_BITBANG is not set -+CONFIG_SPI_COLDFIRE=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_SPI_COLDFIRE_SSI_AUDIO is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_WATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+CONFIG_VIDEO_OUTPUT_CONTROL=m -+# CONFIG_FB is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+CONFIG_HID_DEBUG=y -+# CONFIG_HIDRAW is not set -+# CONFIG_USB_SUPPORT is not set -+# CONFIG_MMC is not set -+# CONFIG_MEMSTICK is not set -+# CONFIG_NEW_LEDS is not set -+# CONFIG_RTC_CLASS is not set -+ -+# -+# Userspace I/O -+# -+# CONFIG_UIO is not set -+ -+# -+# Character devices -+# -+# CONFIG_SERIAL_CONSOLE is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+# CONFIG_EXT3_FS_POSIX_ACL is not set -+# CONFIG_EXT3_FS_SECURITY is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+CONFIG_DNOTIFY=y -+# CONFIG_INOTIFY is not set -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+CONFIG_NTFS_FS=y -+# CONFIG_NTFS_DEBUG is not set -+CONFIG_NTFS_RW=y -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+# CONFIG_PROC_KCORE is not set -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+CONFIG_MINIX_FS=y -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+CONFIG_ROMFS_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+# CONFIG_NFS_V3 is not set -+# CONFIG_NFS_V4 is not set -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_NFSD is not set -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_BIND34 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_KARMA_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_SYSV68_PARTITION is not set -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+# CONFIG_ENABLE_MUST_CHECK is not set -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+CONFIG_DEBUG_SLAB=y -+# CONFIG_DEBUG_SLAB_LEAK is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+# CONFIG_FRAME_POINTER is not set -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+CONFIG_BOOTPARAM=y -+CONFIG_BOOTPARAM_STRING="root=/dev/nfs rw nfsroot=172.27.163.2:/tftpboot/ltib ip=172.27.163.3:172.27.163.2:172.27.255.254:255.255.0.0::eth0:off mtdparts=phys_mapped_flash:16m(User)" -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+# CONFIG_CRYPTO_SEQIV is not set -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+# CONFIG_CRYPTO_XCBC is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_WP512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_ECB is not set -+CONFIG_CRYPTO_CBC=y -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_DEFLATE is not set -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+CONFIG_CRYPTO_TEST=m -+CONFIG_CRYPTO_AUTHENC=y -+# CONFIG_CRYPTO_LZO is not set -+# CONFIG_CRYPTO_HW is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=y -+CONFIG_CRC16=y -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y ---- a/arch/m68k/Kconfig -+++ b/arch/m68k/Kconfig -@@ -11,6 +11,14 @@ config MMU - bool - default y - -+config GENERIC_TIME -+ bool -+ default n -+ -+config GENERIC_CLOCKEVENTS -+ bool -+ default n -+ - config RWSEM_GENERIC_SPINLOCK - bool - default y -@@ -48,7 +56,7 @@ config ARCH_MAY_HAVE_PC_FDC - default y - - config NO_IOPORT -- def_bool y -+ def_bool !(M5445X || M547X_8X) - - config NO_DMA - def_bool SUN3 -@@ -119,6 +127,29 @@ config SUN3 - - If you don't want to compile a kernel exclusively for a Sun 3, say N. - -+config COLDFIRE -+ bool "ColdFire V4e support" -+ default y -+ select CFV4E -+ help -+ Say Y if you want to build a kernel to run on one of the ColdFire -+ V4e boards. -+ -+config CFV4E -+ bool -+ depends on COLDFIRE -+ select MMU_CFV4E if MMU -+ default y -+ -+config MCD_DMA -+ bool "ColdFire MCD DMA support" -+ depends on M547X_8X -+ default y -+ help -+ This enables support for the ColdFire 547x/548x family -+ multichannel DMA support. Many drivers need it. -+ If you want it, say Y -+ - config AMIGA - bool "Amiga support" - depends on !MMU_SUN3 -@@ -144,9 +175,9 @@ config HADES - to use this kernel on a Hades, say Y here; otherwise say N. - - config PCI -- bool -- depends on HADES -- default y -+ bool "PCI bus support" -+ depends on HADES || M54455 || M547X_8X -+ default n - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside -@@ -294,14 +325,142 @@ config M68060 - If you anticipate running this kernel on a computer with a MC68060 - processor, say Y. Otherwise, say N. - -+config M5445X -+ bool "MCF5445x support" -+ depends on COLDFIRE -+ help -+ This option will add support for the MCF5445 processor with mmu. -+ -+config M54451 -+ bool -+ depends on M5445X -+ default n -+ -+config M54455 -+ bool -+ depends on M5445X -+ default n -+ -+choice -+ prompt "Model" -+ depends on M5445X -+ default M54451EVB -+ config M54451EVB -+ bool "M54451EVB" -+ select M54451 -+ config M54455EVB -+ bool "M54455EVB" -+ select M54455 -+endchoice -+ -+ -+config M547X_8X -+ bool "MCF547x/MCF548x support" -+ depends on COLDFIRE -+ help -+ This option will add support for the MCF547x/MCF548x processor with mmu. -+ -+config M547X -+ bool -+ depends on M547X_8X -+ default n -+ -+config M548X -+ bool -+ depends on M547X_8X -+ default n -+ -+choice -+ prompt "Model" -+ depends on M547X_8X -+ default M5485CFE -+ config M5475AFE -+ bool "MCF5475AFE" -+ select M547X -+ config M5475BFE -+ bool "MCF5475BFE" -+ select M547X -+ config M5475CFE -+ bool "MCF5475CFE" -+ select M547X -+ config M5475DFE -+ bool "MCF5475DFE" -+ select M547X -+ config M5475EFE -+ bool "MCF5475EFE" -+ select M547X -+ config M5475FFE -+ bool "MCF5475FFE" -+ select M547X -+ -+ config M5485AFE -+ bool "MCF5485AFE" -+ select M548X -+ config M5485BFE -+ bool "MCF5485BFE" -+ select M548X -+ config M5485CFE -+ bool "MCF5485CFE" -+ select M548X -+ config M5485DFE -+ bool "MCF5485DFE" -+ select M548X -+ config M5485EFE -+ bool "MCF5485EFE" -+ select M548X -+ config M5485FFE -+ bool "MCF5485FFE" -+ select M548X -+ -+endchoice -+ -+config MCFCLK -+ int -+ default 266666666 if M54455EVB -+ default 240000000 if M54451EVB -+ default 266000000 if M547X -+ default 200000000 if M548X -+ help -+ Coldfire System clock. -+ -+config MCF_USER_HALT -+ bool "Coldfire User Halt Enable" -+ depends on M5445X || M547X_8X -+ default n -+ help -+ Enables the HALT instruction in User Mode. -+ - config MMU_MOTOROLA - bool -- depends on MMU && !MMU_SUN3 -+ depends on MMU && !MMU_SUN3 && !COLDFIRE - default y - - config MMU_SUN3 - bool - -+config MMU_CFV4E -+ bool -+ -+config SDRAM_BASE -+ hex -+ depends on COLDFIRE -+ default 0x40000000 if M5445X -+ default 0x00000000 if M547X_8X -+ -+config SDRAM_SIZE -+ hex -+ depends on COLDFIRE -+ default 0x08000000 if M54451EVB -+ default 0x10000000 if M54455EVB -+ default 0x04000000 if M547X_8X -+ -+config NOR_FLASH_BASE -+ hex "NOR Flash Base Address" -+ depends on COLDFIRE -+ default 0x00000000 if M54451EVB -+ default 0x00000000 if M54455EVB -+ default 0xE0000000 if M547X_8X -+ - config M68KFPU_EMU - bool "Math emulation support (EXPERIMENTAL)" - depends on EXPERIMENTAL -@@ -468,6 +627,14 @@ config ZONE_DMA - source "drivers/pci/Kconfig" - - source "drivers/zorro/Kconfig" -+endmenu -+ -+menu "Power management options" -+ -+config PM -+ bool "Power Management support" -+ help -+ Support processor power management modes - - endmenu - -@@ -647,7 +814,7 @@ config DN_SERIAL - - config SERIAL_CONSOLE - bool "Support for serial port console" -- depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) -+ depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO || COLDFIRE) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL || SERIAL_COLDFIRE) - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all ---- a/arch/m68k/Kconfig.debug -+++ b/arch/m68k/Kconfig.debug -@@ -2,4 +2,13 @@ menu "Kernel hacking" - - source "lib/Kconfig.debug" - -+config BOOTPARAM -+ bool 'Compiled-in Kernel Boot Parameter' -+ depends on COLDFIRE -+ -+config BOOTPARAM_STRING -+ string 'Kernel Boot Parameter' -+ default 'console=ttyS0,115200' -+ depends on BOOTPARAM -+ - endmenu ---- a/arch/m68k/kernel/asm-offsets.c -+++ b/arch/m68k/kernel/asm-offsets.c -@@ -58,8 +58,15 @@ int main(void) - DEFINE(PT_A2, offsetof(struct pt_regs, a2)); - DEFINE(PT_PC, offsetof(struct pt_regs, pc)); - DEFINE(PT_SR, offsetof(struct pt_regs, sr)); -+#ifdef CONFIG_COLDFIRE -+ /* Need to get the context out of struct mm for ASID setting */ -+ DEFINE(MM_CONTEXT, offsetof(struct mm_struct, context)); -+ /* Coldfire exception frame has vector *before* pc */ -+ DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) - 4); -+#else - /* bitfields are a bit difficult */ - DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4); -+#endif - - /* offsets into the irq_handler struct */ - DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler)); ---- /dev/null -+++ b/arch/m68k/kernel/bios32_mcf548x.c -@@ -0,0 +1,631 @@ -+/* -+ * bios32.c - PCI BIOS functions for m68k systems. -+ * -+ * Written by Wout Klaren. -+ * -+ * Based on the DEC Alpha bios32.c by Dave Rusling and David Mosberger. -+ */ -+#include <linux/init.h> -+#include <linux/kernel.h> -+ -+#if 0 -+# define DBG_DEVS(args) printk args -+#else -+# define DBG_DEVS(args) -+#endif -+ -+#ifdef CONFIG_PCI -+ -+/* -+ * PCI support for Linux/m68k. Currently only the Hades is supported. -+ * -+ * The support for PCI bridges in the DEC Alpha version has -+ * been removed in this version. -+ */ -+ -+#include <linux/pci.h> -+#include <linux/slab.h> -+#include <linux/mm.h> -+ -+#include <asm/io.h> -+#include <asm/pci.h> -+#include <asm/uaccess.h> -+ -+#define KB 1024 -+#define MB (1024*KB) -+#define GB (1024*MB) -+ -+#define MAJOR_REV 0 -+#define MINOR_REV 5 -+ -+/* -+ * Align VAL to ALIGN, which must be a power of two. -+ */ -+ -+#define MAX(val1, val2) (((val1) > (val2)) ? val1 : val2) -+ -+/* -+ * Offsets relative to the I/O and memory base addresses from where resources -+ * are allocated. -+ */ -+ -+#ifdef CONFIG_COLDFIRE -+#define IO_ALLOC_OFFSET 0x00000100 -+#define MEM_ALLOC_OFFSET 0x00000000 -+#else /* CONFIG_COLDFIRE */ -+#define IO_ALLOC_OFFSET 0x00004000 -+#define MEM_ALLOC_OFFSET 0x04000000 -+#endif /* CONFIG_COLDFIRE */ -+ -+/* -+ * Declarations of hardware specific initialisation functions. -+ */ -+ -+extern struct pci_bus_info *init_hades_pci(void); -+ -+/* -+ * Bus info structure of the PCI bus. A pointer to this structure is -+ * put in the sysdata member of the pci_bus structure. -+ */ -+ -+static struct pci_bus_info *bus_info; -+ -+static int pci_modify = 1; /* If set, layout the PCI bus ourself. */ -+static int skip_vga; /* If set do not modify base addresses -+ of vga cards.*/ -+static int disable_pci_burst; /* If set do not allow PCI bursts. */ -+ -+static unsigned int io_base; -+static unsigned int mem_base; -+ -+/* -+ * static void disable_dev(struct pci_dev *dev) -+ * -+ * Disable PCI device DEV so that it does not respond to I/O or memory -+ * accesses. -+ * -+ * Parameters: -+ * -+ * dev - device to disable. -+ */ -+ -+static void __init disable_dev(struct pci_dev *dev) -+{ -+ unsigned short cmd; -+ -+ if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) || -+ (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) || -+ (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga) -+ return; -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ -+ cmd &= (~PCI_COMMAND_IO & ~PCI_COMMAND_MEMORY & ~PCI_COMMAND_MASTER); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+} -+ -+/* Stolen from pcibios_enable_resources/i386 */ -+int pcibios_enable_device(struct pci_dev *dev, int mask) -+{ -+ u16 cmd, old_cmd; -+ int idx; -+ struct resource *r; -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ old_cmd = cmd; -+ for(idx=0; idx<6; idx++) { -+ /* Only set up the requested stuff */ -+ if (!(mask & (1<<idx))) -+ continue; -+ -+ r = &dev->resource[idx]; -+ if (!r->start && r->end) { -+ printk("PCI: Device %s not available because" -+ " of resource collisions\n", dev->dev.bus_id); -+ return -EINVAL; -+ } -+ if (r->flags & IORESOURCE_IO) -+ cmd |= PCI_COMMAND_IO; -+ if (r->flags & IORESOURCE_MEM) -+ cmd |= PCI_COMMAND_MEMORY; -+ } -+ if (dev->resource[PCI_ROM_RESOURCE].start) -+ cmd |= PCI_COMMAND_MEMORY; -+ if (cmd != old_cmd) { -+ printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->dev.bus_id, old_cmd, cmd); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ } -+ return 0; -+} -+ -+/* -+ * static void layout_dev(struct pci_dev *dev) -+ * -+ * Layout memory and I/O for a device. -+ * -+ * Parameters: -+ * -+ * device - device to layout memory and I/O for. -+ */ -+ -+static void __init layout_dev(struct pci_dev *dev) -+{ -+ unsigned short cmd; -+ unsigned int base, mask, size, reg; -+ unsigned int alignto; -+ int i; -+ -+ /* -+ * Skip video cards if requested. -+ */ -+ if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) || -+ (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) || -+ (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga){ -+ printk("%s: VGA\n",__FUNCTION__); -+ return; -+ } -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ -+ for (reg = PCI_BASE_ADDRESS_0, i = 0; reg <= PCI_BASE_ADDRESS_5; reg += 4, i++) -+ { -+ /* -+ * Figure out how much space and of what type this -+ * device wants. -+ */ -+ -+ pci_write_config_dword(dev, reg, 0xffffffff); -+ pci_read_config_dword(dev, reg, &base); -+ if (!base) -+ { -+ /* this base-address register is unused */ -+ dev->resource[i].start = 0; -+ dev->resource[i].end = 0; -+ dev->resource[i].flags = 0; -+ continue; -+ } -+ -+ /* -+ * We've read the base address register back after -+ * writing all ones and so now we must decode it. -+ */ -+ -+ if (base & PCI_BASE_ADDRESS_SPACE_IO) -+ { -+ /* -+ * I/O space base address register. -+ */ -+ -+ cmd |= PCI_COMMAND_IO; -+ -+ base &= PCI_BASE_ADDRESS_IO_MASK; -+ mask = (~base << 1) | 0x1; -+ size = (mask & base) & 0xffffffff; -+ -+ /* -+ * Align to multiple of size of minimum base. -+ */ -+ -+#ifdef CONFIG_COLDFIRE -+ alignto = MAX(PAGE_SIZE, size) ; -+#else /* CONFIG_COLDFIRE */ -+ alignto = MAX(0x040, size) ; -+#endif /* CONFIG_COLDFIRE */ -+ base = ALIGN(io_base, alignto); -+ io_base = base + size; -+ pci_write_config_dword(dev, reg, base | PCI_BASE_ADDRESS_SPACE_IO); -+ -+ dev->resource[i].start = base; -+ dev->resource[i].end = dev->resource[i].start + size - 1; -+ dev->resource[i].flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; -+ -+ DBG_DEVS(("layout_dev: IO address: %x\n", base)); -+ } -+ else -+ { -+ unsigned int type; -+ -+ /* -+ * Memory space base address register. -+ */ -+ -+ cmd |= PCI_COMMAND_MEMORY; -+ type = base & PCI_BASE_ADDRESS_MEM_TYPE_MASK; -+ base &= PCI_BASE_ADDRESS_MEM_MASK; -+ mask = (~base << 1) | 0x1; -+ size = (mask & base) & 0xffffffff; -+ switch (type) -+ { -+ case PCI_BASE_ADDRESS_MEM_TYPE_32: -+ case PCI_BASE_ADDRESS_MEM_TYPE_64: -+ break; -+ -+ case PCI_BASE_ADDRESS_MEM_TYPE_1M: -+ printk("bios32 WARNING: slot %d, function %d " -+ "requests memory below 1MB---don't " -+ "know how to do that.\n", -+ PCI_SLOT(dev->devfn), -+ PCI_FUNC(dev->devfn)); -+ continue; -+ } -+ DBG_DEVS(("%s MEM: base %x,type %x,mask %x,size %x\n", -+ __FUNCTION__, base, type, mask, size)); -+ /* -+ * Align to multiple of size of minimum base. -+ */ -+ -+ alignto = max_t(unsigned int, 0x1000, size); -+ base = ALIGN(mem_base, alignto); -+ mem_base = base + size; -+ pci_write_config_dword(dev, reg, base); -+ -+ dev->resource[i].start = base; -+ dev->resource[i].end = dev->resource[i].start + size - 1; -+ dev->resource[i].flags = IORESOURCE_MEM; -+ DBG_DEVS(("%s MEM :base %x,size %x\n", -+ __FUNCTION__, base, size)); -+ if (type == PCI_BASE_ADDRESS_MEM_TYPE_64) -+ { -+ /* -+ * 64-bit address, set the highest 32 bits -+ * to zero. -+ */ -+ -+ reg += 4; -+ pci_write_config_dword(dev, reg, 0); -+ -+ i++; -+ dev->resource[i].start = 0; -+ dev->resource[i].end = 0; -+ dev->resource[i].flags = 0; -+ printk("%s:type == 64\n",__FUNCTION__); -+ } -+ } -+ } -+ -+ /* -+ * Enable device: -+ */ -+ -+ if (dev->class >> 8 == PCI_CLASS_NOT_DEFINED || -+ dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA || -+ dev->class >> 8 == PCI_CLASS_DISPLAY_VGA || -+ dev->class >> 8 == PCI_CLASS_DISPLAY_XGA) -+ { -+ /* -+ * All of these (may) have I/O scattered all around -+ * and may not use i/o-base address registers at all. -+ * So we just have to always enable I/O to these -+ * devices. -+ */ -+ cmd |= PCI_COMMAND_IO; -+ } -+ -+ pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); -+ -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, (disable_pci_burst) ? 0 : 32); -+ -+ if (bus_info != NULL) -+ bus_info->conf_device(dev); /* Machine dependent configuration. */ -+ -+ printk(KERN_INFO "layout_dev: bus %d slot 0x%x VID 0x%x DID 0x%x class 0x%x\n", -+ dev->bus->number, PCI_SLOT(dev->devfn), -+ dev->vendor, dev->device, dev->class); -+} -+ -+/* -+ * static void layout_bus(struct pci_bus *bus) -+ * -+ * Layout memory and I/O for all devices on the given bus. -+ * -+ * Parameters: -+ * -+ * bus - bus. -+ */ -+ -+static void __init layout_bus(struct pci_bus *bus) -+{ -+ unsigned int bio, bmem; -+ struct pci_dev *dev; -+ -+ DBG_DEVS(("layout_bus: starting bus %d\n", bus->number)); -+ -+ if (list_empty(&bus->devices) && list_empty(&bus->children)) -+ return; -+ -+ /* -+ * Align the current bases on appropriate boundaries (4K for -+ * IO and 1MB for memory). -+ */ -+ -+ bio = io_base = ALIGN(io_base, 4*KB); -+ bmem = mem_base = ALIGN(mem_base, 1*MB); -+ -+ /* -+ * PCI devices might have been setup by a PCI BIOS emulation -+ * running under TOS. In these cases there is a -+ * window during which two devices may have an overlapping -+ * address range. To avoid this causing trouble, we first -+ * turn off the I/O and memory address decoders for all PCI -+ * devices. They'll be re-enabled only once all address -+ * decoders are programmed consistently. -+ */ -+ -+ DBG_DEVS(("layout_bus: disable_dev for bus %d\n", bus->number)); -+ -+#ifdef NL_ORIGINAL -+ for (dev = bus->devices; dev; dev = dev->sibling) -+#else -+ dev = NULL; -+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) -+#endif -+ { -+ if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) || -+ (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA)) -+ disable_dev(dev); -+ } -+ -+ /* -+ * Allocate space to each device: -+ */ -+ -+ DBG_DEVS(("layout_bus: starting bus %d devices\n", bus->number)); -+ -+#ifdef NL_ORIGINAL -+ for (dev = bus->devices; dev; dev = dev->sibling) -+#else -+ dev = NULL; -+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) -+#endif -+ { -+ if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) || -+ (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA)) -+ layout_dev(dev); -+ } -+ -+ DBG_DEVS(("layout_bus: bus %d finished\n", bus->number)); -+} -+ -+/* -+ * static void pcibios_fixup(void) -+ * -+ * Layout memory and I/O of all devices on the PCI bus if 'pci_modify' is -+ * true. This might be necessary because not every m68k machine with a PCI -+ * bus has a PCI BIOS. This function should be called right after -+ * pci_scan_bus() in pcibios_init(). -+ */ -+ -+static void __init pcibios_fixup(void) -+{ -+ DBG_DEVS(("%s\n", __FUNCTION__)); -+ if (pci_modify) -+ { -+ /* -+ * Set base addresses for allocation of I/O and memory space. -+ */ -+ -+ io_base = bus_info->io_space.start + IO_ALLOC_OFFSET; -+ mem_base = bus_info->mem_space.start + MEM_ALLOC_OFFSET; -+ -+ /* -+ * Scan the tree, allocating PCI memory and I/O space. -+ */ -+ -+#ifdef NL_ORIGINAL -+ layout_bus(pci_bus_b(pci_root.next)); -+#else -+ layout_bus(pci_bus_b(pci_root_buses.next)); -+#endif -+ } -+ -+ /* -+ * Fix interrupt assignments, etc. -+ */ -+ -+ bus_info->fixup(pci_modify); -+} -+ -+/* -+ * static void pcibios_claim_resources(struct pci_bus *bus) -+ * -+ * Claim all resources that are assigned to devices on the given bus. -+ * -+ * Parameters: -+ * -+ * bus - bus. -+ */ -+ -+static void __init pcibios_claim_resources(struct pci_bus *bus) -+{ -+ struct pci_dev *dev; -+ int i; -+ DBG_DEVS(("%s\n", __FUNCTION__)); -+#ifdef NL_ORIGINAL -+ while (bus) -+#else -+ while ((bus = pci_find_next_bus(bus)) != NULL) -+#endif -+ { -+ -+#ifdef NL_ORIGINAL -+ for (dev = bus->devices; (dev != NULL); dev = dev->sibling) -+#else -+ dev = NULL; -+ while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) -+#endif -+ { -+ for (i = 0; i < PCI_NUM_RESOURCES; i++) -+ { -+ struct resource *r = &dev->resource[i]; -+ struct resource *pr; -+ struct pci_bus_info *bus_info = -+ (struct pci_bus_info *) dev->sysdata; -+ -+ if ((r->start == 0) || (r->parent != NULL)) -+ continue; -+ -+#ifdef CONFIG_COLDFIRE -+ if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) -+ continue; -+#endif /* CONFIG_COLDFIRE */ -+#if 1 -+ if (r->flags & IORESOURCE_IO) -+ pr = &bus_info->io_space; -+ else -+ pr = &bus_info->mem_space; -+#else -+ if (r->flags & IORESOURCE_IO) -+ pr = &ioport_resource; -+ else -+ pr = &iomem_resource; -+#endif -+ if (request_resource(pr, r) < 0) -+ { -+#ifdef NL_ORIGINAL -+ DBG_DEVS(("PCI: Address space collision on " -+ "region %d of device %s\n", i, dev->name)); -+#else -+ printk("PCI: Address space collision on region %d of device %s\n", i, dev->dev.bus_id); -+#endif -+ } -+ } -+ } -+ -+#ifdef NL_ORIGINAL -+ if (bus->children) -+ pcibios_claim_resources(bus->children); -+#else -+ if (!list_empty(&bus->children)) -+ pcibios_claim_resources(pci_bus_b(bus->children.next)); -+#endif -+ -+#ifdef NL_ORIGINAL -+ bus = bus->next; -+#endif -+ } -+} -+ -+/* -+ * int pcibios_assign_resource(struct pci_dev *dev, int i) -+ * -+ * Assign a new address to a PCI resource. -+ * -+ * Parameters: -+ * -+ * dev - device. -+ * i - resource. -+ * -+ * Result: 0 if successful. -+ */ -+ -+int __init pcibios_assign_resource(struct pci_dev *dev, int i) -+{ -+ struct resource *r = &dev->resource[i]; -+ struct resource *pr = pci_find_parent_resource(dev, r); -+ unsigned long size = r->end + 1; -+ DBG_DEVS(("%s:IO_ALLOC_OFFSET %x\n", __FUNCTION__, IO_ALLOC_OFFSET)); -+ if (!pr) -+ return -EINVAL; -+ -+ if (r->flags & IORESOURCE_IO) -+ { -+ DBG_DEVS(("%s:IORESOURCE_IO:start %x, size %lx\n", -+ __FUNCTION__, bus_info->io_space.start, size)); -+ if (size > 0x100) -+ return -EFBIG; -+ -+#ifdef NL_ORIGINAL -+ if (allocate_resource(pr, r, size, bus_info->io_space.start + -+ IO_ALLOC_OFFSET, bus_info->io_space.end, 1024)) -+#else -+ if (allocate_resource(pr, r, size, bus_info->io_space.start + -+ IO_ALLOC_OFFSET, bus_info->io_space.end, 1024, NULL, NULL)) -+#endif -+ return -EBUSY; -+ } -+ else -+ { -+ DBG_DEVS(("%s:IORESOURCE_MEM:start %x, size %lx\n", -+ __FUNCTION__, bus_info->mem_space.start, size)); -+#ifdef NL_ORIGINAL -+ if (allocate_resource(pr, r, size, bus_info->mem_space.start + -+ MEM_ALLOC_OFFSET, bus_info->mem_space.end, size)) -+#else -+ if (allocate_resource(pr, r, size, bus_info->io_space.start + -+ IO_ALLOC_OFFSET, bus_info->io_space.end, 1024, NULL, NULL)) -+#endif -+ return -EBUSY; -+ } -+ -+ if (i < 6) -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, r->start); -+ -+ return 0; -+} -+ -+void pcibios_fixup_bus(struct pci_bus *bus) -+{ -+ struct pci_dev *dev; -+ void *sysdata; -+ -+ sysdata = (bus->parent) ? bus->parent->sysdata : bus->sysdata; -+ -+#ifdef NL_ORIGINAL -+ for (dev = bus->devices; (dev != NULL); dev = dev->sibling) -+#else -+ dev = NULL; -+ while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) -+#endif -+ dev->sysdata = sysdata; -+} -+ -+int __init pcibios_init(void) -+{ -+ printk("Linux/m68k PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV); -+ -+ bus_info = NULL; -+#ifdef CONFIG_COLDFIRE -+ bus_info = init_coldfire_pci(); -+#endif /* CONFIG_COLDFIRE */ -+#ifdef CONFIG_HADES -+ if (MACH_IS_HADES) -+ bus_info = init_hades_pci(); -+#endif -+ if (bus_info != NULL) -+ { -+ printk("PCI: Probing PCI hardware\n"); -+ pci_scan_bus(0, bus_info->m68k_pci_ops, bus_info); -+ pcibios_fixup(); -+#ifdef NL_ORIGINAL -+ pcibios_claim_resources(pci_root); -+#else -+ pcibios_claim_resources(pci_bus_b(pci_root_buses.next)); -+#endif -+ } -+ else -+ printk("PCI: No PCI bus detected\n"); -+ return 0; -+} -+ -+subsys_initcall(pcibios_init); -+ -+char * pcibios_setup(char *str) -+{ -+ if (!strcmp(str, "nomodify")) -+ { -+ pci_modify = 0; -+ return NULL; -+ } -+ else if (!strcmp(str, "skipvga")) -+ { -+ skip_vga = 1; -+ return NULL; -+ } -+ else if (!strcmp(str, "noburst")) -+ { -+ disable_pci_burst = 1; -+ return NULL; -+ } -+ -+ return str; -+} -+#endif /* CONFIG_PCI */ ---- a/arch/m68k/kernel/dma.c -+++ b/arch/m68k/kernel/dma.c -@@ -11,12 +11,24 @@ - #include <linux/kernel.h> - #include <linux/scatterlist.h> - #include <linux/vmalloc.h> -- -+#include <linux/pci.h> - #include <asm/pgalloc.h> - - void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t flag) - { -+#if defined(CONFIG_M547X_8X) | defined(CONFIG_M54455) -+ /* -+ * On the M5445x platform the memory allocated with GFP_DMA -+ * is guaranteed to be DMA'able. -+ */ -+ void *addr; -+ -+ size = PAGE_ALIGN(size); -+ addr = kmalloc(size, GFP_DMA); -+ *handle = virt_to_phys(addr); -+ return addr; -+#else - struct page *page, **map; - pgprot_t pgprot; - void *addr; -@@ -55,6 +67,7 @@ void *dma_alloc_coherent(struct device * - kfree(map); - - return addr; -+#endif - } - EXPORT_SYMBOL(dma_alloc_coherent); - -@@ -62,7 +75,11 @@ void dma_free_coherent(struct device *de - void *addr, dma_addr_t handle) - { - pr_debug("dma_free_coherent: %p, %x\n", addr, handle); -+#if defined(CONFIG_M547X_8X) | defined(CONFIG_M54455) -+ kfree(addr); -+#else - vfree(addr); -+#endif - } - EXPORT_SYMBOL(dma_free_coherent); - ---- a/arch/m68k/kernel/Makefile -+++ b/arch/m68k/kernel/Makefile -@@ -2,19 +2,27 @@ - # Makefile for the linux kernel. - # - --ifndef CONFIG_SUN3 -- extra-y := head.o -+ifdef CONFIG_SUN3 -+ extra-y := sun3-head.o vmlinux.lds -+ obj-y := entry.o signal.o ints.o - else -- extra-y := sun3-head.o -+ifndef CONFIG_COLDFIRE -+ extra-y := head.o vmlinux.lds -+ obj-y := entry.o signal.o traps.o ints.o -+ obj-$(CONFIG_PCI) += bios32.o -+else # CONFIG_COLDFIRE -+ extra-y := ../coldfire/head.o vmlinux.lds -+ifdef CONFIG_M547X_8X -+ obj-$(CONFIG_PCI) += bios32_mcf548x.o -+endif -+endif - endif --extra-y += vmlinux.lds - --obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \ -+obj-y += process.o ptrace.o module.o \ - sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o devres.o - - devres-y = ../../../kernel/irq/devres.o - --obj-$(CONFIG_PCI) += bios32.o - obj-y$(CONFIG_MMU_SUN3) += dma.o # no, it's not a typo - - EXTRA_AFLAGS := -traditional ---- a/arch/m68k/kernel/process.c -+++ b/arch/m68k/kernel/process.c -@@ -191,6 +191,7 @@ EXPORT_SYMBOL(kernel_thread); - - void flush_thread(void) - { -+#if !defined(CONFIG_COLDFIRE) - unsigned long zero = 0; - set_fs(USER_DS); - current->thread.fs = __USER_DS; -@@ -198,6 +199,14 @@ void flush_thread(void) - asm volatile (".chip 68k/68881\n\t" - "frestore %0@\n\t" - ".chip 68k" : : "a" (&zero)); -+#else -+ set_fs(USER_DS); -+ current->thread.fs = USER_DS; -+#if defined(CONFIG_FPU) -+ if (!FPU_IS_EMU) -+ asm volatile ("frestore %0@\n\t" : : "a" (&zero)); -+#endif -+#endif - } - - /* -@@ -261,6 +270,7 @@ int copy_thread(int nr, unsigned long cl - * Must save the current SFC/DFC value, NOT the value when - * the parent was last descheduled - RGH 10-08-96 - */ -+#if !defined(CONFIG_COLDFIRE) - p->thread.fs = get_fs().seg; - - if (!FPU_IS_EMU) { -@@ -272,9 +282,34 @@ int copy_thread(int nr, unsigned long cl - "fmoveml %/fpiar/%/fpcr/%/fpsr,%1" - : : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0]) - : "memory"); -+#else -+ p->thread.fs = get_fs(); -+ -+#if defined(CONFIG_FPU) -+ if (!FPU_IS_EMU) { -+ /* Copy the current fpu state */ -+ asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) -+ : "memory"); -+ -+ if (p->thread.fpstate[0]) { -+ asm volatile ("fmovemd %/fp0-%/fp7,%0" -+ : : "m" (p->thread.fp[0]) -+ : "memory"); -+ asm volatile ("fmovel %/fpiar,%0" -+ : : "m" (p->thread.fpcntl[0]) -+ : "memory"); -+ asm volatile ("fmovel %/fpcr,%0" -+ : : "m" (p->thread.fpcntl[1]) -+ : "memory"); -+ asm volatile ("fmovel %/fpsr,%0" -+ : : "m" (p->thread.fpcntl[2]) -+ : "memory"); -+ } - /* Restore the state in case the fpu was busy */ - asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0])); - } -+#endif -+#endif - - return 0; - } -@@ -283,7 +318,9 @@ int copy_thread(int nr, unsigned long cl - - int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu) - { -+#if !defined(CONFIG_COLDFIRE) || defined(CONFIG_FPU) - char fpustate[216]; -+#endif - - if (FPU_IS_EMU) { - int i; -@@ -300,6 +337,7 @@ int dump_fpu (struct pt_regs *regs, stru - } - - /* First dump the fpu context to avoid protocol violation. */ -+#if !defined(CONFIG_COLDFIRE) - asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory"); - if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2]) - return 0; -@@ -310,6 +348,25 @@ int dump_fpu (struct pt_regs *regs, stru - asm volatile ("fmovemx %/fp0-%/fp7,%0" - :: "m" (fpu->fpregs[0]) - : "memory"); -+#elif defined(CONFIG_FPU) -+ asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory"); -+ if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2]) -+ return 0; -+ -+ asm volatile ("fmovel %/fpiar,%0" -+ : : "m" (fpu->fpcntl[0]) -+ : "memory"); -+ asm volatile ("fmovel %/fpcr,%0" -+ : : "m" (fpu->fpcntl[1]) -+ : "memory"); -+ asm volatile ("fmovel %/fpsr,%0" -+ : : "m" (fpu->fpcntl[2]) -+ : "memory"); -+ asm volatile ("fmovemd %/fp0-%/fp7,%0" -+ : : "m" (fpu->fpregs[0]) -+ : "memory"); -+#endif -+ - return 1; - } - EXPORT_SYMBOL(dump_fpu); ---- a/arch/m68k/kernel/setup.c -+++ b/arch/m68k/kernel/setup.c -@@ -67,13 +67,22 @@ EXPORT_SYMBOL(m68k_memory); - - struct mem_info m68k_ramdisk; - -+#if !defined(CONFIG_COLDFIRE) - static char m68k_command_line[CL_SIZE]; -+#else -+char m68k_command_line[CL_SIZE]; -+unsigned long uboot_info_stk; -+EXPORT_SYMBOL(uboot_info_stk); -+#endif - - void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL; - /* machine dependent irq functions */ - void (*mach_init_IRQ) (void) __initdata = NULL; - void (*mach_get_model) (char *model); - int (*mach_get_hardware_list) (char *buffer); -+#ifdef CONFIG_COLDFIRE -+void (*mach_tick)(void); -+#endif - /* machine dependent timer functions */ - unsigned long (*mach_gettimeoffset) (void); - int (*mach_hwclk) (int, struct rtc_time*); -@@ -128,13 +137,17 @@ extern void config_hp300(void); - extern void config_q40(void); - extern void config_sun3x(void); - -+#ifdef CONFIG_COLDFIRE -+void coldfire_sort_memrec(void); -+#endif -+ - #define MASK_256K 0xfffc0000 - - extern void paging_init(void); - - static void __init m68k_parse_bootinfo(const struct bi_record *record) - { -- while (record->tag != BI_LAST) { -+ while ((record->tag != BI_LAST) && !(CONFIG_COLDFIRE)) { - int unknown = 0; - const unsigned long *data = record->data; - -@@ -192,7 +205,11 @@ static void __init m68k_parse_bootinfo(c - record->size); - } - -- m68k_realnum_memory = m68k_num_memory; -+#ifdef CONFIG_COLDFIRE -+ coldfire_sort_memrec(); -+#endif -+ -+ m68k_realnum_memory = m68k_num_memory; - #ifdef CONFIG_SINGLE_MEMORY_CHUNK - if (m68k_num_memory > 1) { - printk("Ignoring last %i chunks of physical memory\n", -@@ -205,7 +222,9 @@ static void __init m68k_parse_bootinfo(c - void __init setup_arch(char **cmdline_p) - { - extern int _etext, _edata, _end; -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) - int i; -+#endif - - /* The bootinfo is located right after the kernel bss */ - m68k_parse_bootinfo((const struct bi_record *)&_end); -@@ -220,9 +239,10 @@ void __init setup_arch(char **cmdline_p) - * We should really do our own FPU check at startup. - * [what do we do with buggy 68LC040s? if we have problems - * with them, we should add a test to check_bugs() below] */ --#ifndef CONFIG_M68KFPU_EMU_ONLY -+#if !defined(CONFIG_M68KFPU_EMU_ONLY) && defined(CONFIG_FPU) - /* clear the fpu if we have one */ -- if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) { -+ if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060| -+ FPU_CFV4E)) { - volatile int zero = 0; - asm volatile ("frestore %0" : : "m" (zero)); - } -@@ -310,13 +330,18 @@ void __init setup_arch(char **cmdline_p) - config_sun3x(); - break; - #endif -+#ifdef CONFIG_COLDFIRE -+ case MACH_CFMMU: -+ config_coldfire(); -+ break; -+#endif - default: - panic("No configuration setup"); - } - - paging_init(); - --#ifndef CONFIG_SUN3 -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) - for (i = 1; i < m68k_num_memory; i++) - free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr, - m68k_memory[i].size); -@@ -343,6 +368,10 @@ void __init setup_arch(char **cmdline_p) - - #endif /* !CONFIG_SUN3 */ - -+#ifdef CONFIG_COLDFIRE -+ mmu_context_init(); -+#endif -+ - /* set ISA defs early as possible */ - #if defined(CONFIG_ISA) && defined(MULTI_ISA) - #if defined(CONFIG_Q40) -@@ -373,6 +402,7 @@ static int show_cpuinfo(struct seq_file - #define LOOP_CYCLES_68030 (8) - #define LOOP_CYCLES_68040 (3) - #define LOOP_CYCLES_68060 (1) -+#define LOOP_CYCLES_COLDFIRE (2) - - if (CPU_IS_020) { - cpu = "68020"; -@@ -386,6 +416,9 @@ static int show_cpuinfo(struct seq_file - } else if (CPU_IS_060) { - cpu = "68060"; - clockfactor = LOOP_CYCLES_68060; -+ } else if (CPU_IS_CFV4E) { -+ cpu = "ColdFire V4e"; -+ clockfactor = LOOP_CYCLES_COLDFIRE; - } else { - cpu = "680x0"; - clockfactor = 0; -@@ -404,6 +437,8 @@ static int show_cpuinfo(struct seq_file - fpu = "68060"; - else if (m68k_fputype & FPU_SUNFPA) - fpu = "Sun FPA"; -+ else if (m68k_fputype & FPU_CFV4E) -+ fpu = "ColdFire V4e"; - else - fpu = "none"; - #endif -@@ -420,6 +455,8 @@ static int show_cpuinfo(struct seq_file - mmu = "Sun-3"; - else if (m68k_mmutype & MMU_APOLLO) - mmu = "Apollo"; -+ else if (m68k_mmutype & MMU_CFV4E) -+ mmu = "ColdFire"; - else - mmu = "unknown"; - -@@ -482,7 +519,7 @@ int get_hardware_list(char *buffer) - - void check_bugs(void) - { --#ifndef CONFIG_M68KFPU_EMU -+#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M5445X) - if (m68k_fputype == 0) { - printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, " - "WHICH IS REQUIRED BY LINUX/M68K ***\n"); ---- a/arch/m68k/kernel/sys_m68k.c -+++ b/arch/m68k/kernel/sys_m68k.c -@@ -29,6 +29,9 @@ - #include <asm/traps.h> - #include <asm/page.h> - #include <asm/unistd.h> -+#ifdef CONFIG_COLDFIRE -+#include <asm/cacheflush.h> -+#endif - - /* - * sys_pipe() is the normal C calling standard for creating -@@ -257,6 +260,7 @@ asmlinkage int sys_ipc (uint call, int f - return -EINVAL; - } - -+#ifndef CONFIG_COLDFIRE - /* Convert virtual (user) address VADDR to physical address PADDR */ - #define virt_to_phys_040(vaddr) \ - ({ \ -@@ -580,6 +584,7 @@ cache_flush_060 (unsigned long addr, int - } - return 0; - } -+#endif /* CONFIG_COLDFIRE */ - - /* sys_cacheflush -- flush (part of) the processor cache. */ - asmlinkage int -@@ -612,6 +617,7 @@ sys_cacheflush (unsigned long addr, int - goto out; - } - -+#ifndef CONFIG_COLDFIRE - if (CPU_IS_020_OR_030) { - if (scope == FLUSH_SCOPE_LINE && len < 256) { - unsigned long cacr; -@@ -656,6 +662,16 @@ sys_cacheflush (unsigned long addr, int - ret = cache_flush_060 (addr, scope, cache, len); - } - } -+#else /* CONFIG_COLDFIRE */ -+ if ((cache & FLUSH_CACHE_INSN) && (cache & FLUSH_CACHE_DATA)) -+ flush_bcache(); -+ else if (cache & FLUSH_CACHE_INSN) -+ flush_icache(); -+ else -+ flush_dcache(); -+ -+ ret = 0; -+#endif /* CONFIG_COLDFIRE */ - out: - unlock_kernel(); - return ret; ---- a/arch/m68k/kernel/time.c -+++ b/arch/m68k/kernel/time.c -@@ -40,6 +40,11 @@ static inline int set_rtc_mmss(unsigned - */ - static irqreturn_t timer_interrupt(int irq, void *dummy) - { -+#ifdef CONFIG_COLDFIRE -+ /* kick hardware timer if necessary */ -+ if (mach_tick) -+ mach_tick(); -+#endif - do_timer(1); - #ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); ---- a/arch/m68k/kernel/vmlinux.lds.S -+++ b/arch/m68k/kernel/vmlinux.lds.S -@@ -1,10 +1,13 @@ - PHDRS - { -- text PT_LOAD FILEHDR PHDRS FLAGS (7); -+ headers PT_PHDR PHDRS ; -+ text PT_LOAD FILEHDR PHDRS FLAGS (5); - data PT_LOAD FLAGS (7); - } - #ifdef CONFIG_SUN3 - #include "vmlinux-sun3.lds" -+#elif CONFIG_COLDFIRE -+#include "../coldfire/vmlinux-cf.lds" - #else - #include "vmlinux-std.lds" - #endif ---- a/arch/m68k/lib/checksum.c -+++ b/arch/m68k/lib/checksum.c -@@ -39,8 +39,131 @@ - * computes a partial checksum, e.g. for TCP/UDP fragments - */ - -+#ifdef CONFIG_COLDFIRE -+ -+static inline unsigned short from32to16(unsigned long x) -+{ -+ /* add up 16-bit and 16-bit for 16+c bit */ -+ x = (x & 0xffff) + (x >> 16); -+ /* add up carry.. */ -+ x = (x & 0xffff) + (x >> 16); -+ return x; -+} -+ -+static unsigned long do_csum(const unsigned char *buff, int len) -+{ -+ int odd, count; -+ unsigned long result = 0; -+ -+ if (len <= 0) -+ goto out; -+ odd = 1 & (unsigned long) buff; -+ if (odd) { -+ result = *buff; -+ len--; -+ buff++; -+ } -+ count = len >> 1; /* nr of 16-bit words.. */ -+ if (count) { -+ if (2 & (unsigned long) buff) { -+ result += *(unsigned short *) buff; -+ count--; -+ len -= 2; -+ buff += 2; -+ } -+ count >>= 1; /* nr of 32-bit words.. */ -+ if (count) { -+ unsigned long carry = 0; -+ do { -+ unsigned long w = *(unsigned long *) buff; -+ count--; -+ buff += 4; -+ result += carry; -+ result += w; -+ carry = (w > result); -+ } while (count); -+ result += carry; -+ result = (result & 0xffff) + (result >> 16); -+ } -+ if (len & 2) { -+ result += *(unsigned short *) buff; -+ buff += 2; -+ } -+ } -+ if (len & 1) -+ result += (*buff << 8); -+ result = from32to16(result); -+ if (odd) -+ result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); -+out: -+ return result; -+} -+ -+/* -+ * This is a version of ip_compute_csum() optimized for IP headers, -+ * which always checksum on 4 octet boundaries. -+ */ -+__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -+{ -+ return ~do_csum(iph, ihl*4); -+} -+EXPORT_SYMBOL(ip_fast_csum); -+ -+/* -+ * computes the checksum of a memory block at buff, length len, -+ * and adds in "sum" (32-bit) -+ * -+ * returns a 32-bit number suitable for feeding into itself -+ * or csum_tcpudp_magic -+ * -+ * this function must be called with even lengths, except -+ * for the last fragment, which may be odd -+ * -+ * it's best to have buff aligned on a 32-bit boundary -+ */ - __wsum csum_partial(const void *buff, int len, __wsum sum) - { -+ unsigned int result = do_csum(buff, len); -+ -+ /* add in old sum, and carry.. */ -+ result += sum; -+ if (sum > result) -+ result += 1; -+ return result; -+} -+EXPORT_SYMBOL(csum_partial); -+ -+/* -+ * copy from fs while checksumming, otherwise like csum_partial -+ */ -+ -+__wsum -+csum_partial_copy_from_user(const void __user *src, void *dst, int len, -+ __wsum sum, int *csum_err) -+{ -+ if (csum_err) *csum_err = 0; -+ memcpy(dst, src, len); -+ return csum_partial(dst, len, sum); -+} -+EXPORT_SYMBOL(csum_partial_copy_from_user); -+ -+/* -+ * copy from ds while checksumming, otherwise like csum_partial -+ */ -+ -+__wsum -+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) -+{ -+ memcpy(dst, src, len); -+ return csum_partial(dst, len, sum); -+} -+EXPORT_SYMBOL(csum_partial_copy_nocheck); -+ -+#else /* !CONFIG_COLDFIRE */ -+ -+unsigned int -+csum_partial(const unsigned char *buff, int len, unsigned int sum) -+{ - unsigned long tmp1, tmp2; - /* - * Experiments with ethernet and slip connections show that buff -@@ -423,3 +546,4 @@ csum_partial_copy_nocheck(const void *sr - return(sum); - } - EXPORT_SYMBOL(csum_partial_copy_nocheck); -+#endif /* CONFIG_COLDFIRE */ ---- a/arch/m68k/lib/muldi3.c -+++ b/arch/m68k/lib/muldi3.c -@@ -21,12 +21,22 @@ Boston, MA 02111-1307, USA. */ - - #define BITS_PER_UNIT 8 - -+#ifdef CONFIG_COLDFIRE -+#define umul_ppmm(w1, w0, u, v) \ -+ do { \ -+ unsigned long long x; \ -+ x = (unsigned long long)u * v; \ -+ w0 = (unsigned long)(x & 0x00000000ffffffff); \ -+ w1 = (unsigned long)(x & 0xffffffff00000000) >> 32; \ -+ } while (0) -+#else /* CONFIG_COLDFIRE */ - #define umul_ppmm(w1, w0, u, v) \ - __asm__ ("mulu%.l %3,%1:%0" \ - : "=d" ((USItype)(w0)), \ - "=d" ((USItype)(w1)) \ - : "%0" ((USItype)(u)), \ - "dmi" ((USItype)(v))) -+#endif /* CONFIG_COLDFIRE */ - - #define __umulsidi3(u, v) \ - ({DIunion __w; \ ---- a/arch/m68k/lib/semaphore.S -+++ b/arch/m68k/lib/semaphore.S -@@ -16,11 +16,24 @@ - * there is contention on the semaphore. - */ - ENTRY(__down_failed) -+#ifndef CONFIG_COLDFIRE - moveml %a0/%d0/%d1,-(%sp) -+#else -+ movel %a0,-(%sp) -+ movel %d0,-(%sp) -+ movel %d1,-(%sp) -+#endif - movel %a1,-(%sp) - jbsr __down - movel (%sp)+,%a1 -+#ifndef CONFIG_COLDFIRE - moveml (%sp)+,%a0/%d0/%d1 -+#else -+ movel (%sp)+,%d1 -+ movel (%sp)+,%d0 -+ movel (%sp)+,%a0 -+#endif -+ - rts - - ENTRY(__down_failed_interruptible) -@@ -44,10 +57,22 @@ ENTRY(__down_failed_trylock) - rts - - ENTRY(__up_wakeup) -+#ifndef CONFIG_COLDFIRE - moveml %a0/%d0/%d1,-(%sp) -+#else -+ movel %a0,-(%sp) -+ movel %d0,-(%sp) -+ movel %d1,-(%sp) -+#endif - movel %a1,-(%sp) - jbsr __up - movel (%sp)+,%a1 -+#ifndef CONFIG_COLDFIRE - moveml (%sp)+,%a0/%d0/%d1 -+#else -+ movel (%sp)+,%d1 -+ movel (%sp)+,%d0 -+ movel (%sp)+,%a0 -+#endif - rts - ---- a/arch/m68k/lib/string.c -+++ b/arch/m68k/lib/string.c -@@ -15,6 +15,7 @@ char *strcpy(char *dest, const char *src - } - EXPORT_SYMBOL(strcpy); - -+#ifndef CONFIG_COLDFIRE - void *memset(void *s, int c, size_t count) - { - void *xs = s; -@@ -143,6 +144,69 @@ void *memcpy(void *to, const void *from, - } - EXPORT_SYMBOL(memcpy); - -+#else /* CONFIG_COLDFIRE */ -+ -+void *memset(void *s, int c, size_t count) -+{ -+ unsigned long x; -+ void *originalTo; -+ -+ for (x = 0; x < count; x++) -+ *(unsigned char *)s++ = (unsigned char)c; -+ -+ return originalTo; -+} -+EXPORT_SYMBOL(memset); -+ -+void *memcpy(void *to, const void *from, size_t n) -+{ -+ void *xto = to; -+ size_t temp; -+ -+ if (!n) -+ return xto; -+ if ((long) to & 1) { -+ char *cto = to; -+ const char *cfrom = from; -+ *cto++ = *cfrom++; -+ to = cto; -+ from = cfrom; -+ n--; -+ } -+ if (n > 2 && (long) to & 2) { -+ short *sto = to; -+ const short *sfrom = from; -+ *sto++ = *sfrom++; -+ to = sto; -+ from = sfrom; -+ n -= 2; -+ } -+ temp = n >> 2; -+ if (temp) { -+ long *lto = to; -+ const long *lfrom = from; -+ for (; temp; temp--) -+ *lto++ = *lfrom++; -+ to = lto; -+ from = lfrom; -+ } -+ if (n & 2) { -+ short *sto = to; -+ const short *sfrom = from; -+ *sto++ = *sfrom++; -+ to = sto; -+ from = sfrom; -+ } -+ if (n & 1) { -+ char *cto = to; -+ const char *cfrom = from; -+ *cto = *cfrom; -+ } -+ return xto; -+} -+EXPORT_SYMBOL(memcpy); -+#endif /* CONFIG_COLDFIRE */ -+ - void *memmove(void *dest, const void *src, size_t n) - { - void *xdest = dest; ---- a/arch/m68k/lib/uaccess.c -+++ b/arch/m68k/lib/uaccess.c -@@ -5,6 +5,7 @@ - */ - - #include <linux/module.h> -+#ifndef CONFIG_COLDFIRE - #include <asm/uaccess.h> - - unsigned long __generic_copy_from_user(void *to, const void __user *from, -@@ -220,3 +221,244 @@ unsigned long __clear_user(void __user * - return res; - } - EXPORT_SYMBOL(__clear_user); -+ -+#else /* CONFIG_COLDFIRE */ -+ -+#include <asm/cf_uaccess.h> -+ -+unsigned long __generic_copy_from_user(void *to, const void *from, -+ unsigned long n) -+{ -+ unsigned long tmp; -+ __asm__ __volatile__ -+ (" tstl %2\n" -+ " jeq 2f\n" -+ "1: movel (%1)+,%3\n" -+ " movel %3,(%0)+\n" -+ " subql #1,%2\n" -+ " jne 1b\n" -+ "2: movel %4,%2\n" -+ " bclr #1,%2\n" -+ " jeq 4f\n" -+ "3: movew (%1)+,%3\n" -+ " movew %3,(%0)+\n" -+ "4: bclr #0,%2\n" -+ " jeq 6f\n" -+ "5: moveb (%1)+,%3\n" -+ " moveb %3,(%0)+\n" -+ "6:\n" -+ ".section .fixup,\"ax\"\n" -+ " .even\n" -+ "7: movel %2,%%d0\n" -+ "71:clrl (%0)+\n" -+ " subql #1,%%d0\n" -+ " jne 71b\n" -+ " lsll #2,%2\n" -+ " addl %4,%2\n" -+ " btst #1,%4\n" -+ " jne 81f\n" -+ " btst #0,%4\n" -+ " jne 91f\n" -+ " jra 6b\n" -+ "8: addql #2,%2\n" -+ "81:clrw (%0)+\n" -+ " btst #0,%4\n" -+ " jne 91f\n" -+ " jra 6b\n" -+ "9: addql #1,%2\n" -+ "91:clrb (%0)+\n" -+ " jra 6b\n" -+ ".previous\n" -+ ".section __ex_table,\"a\"\n" -+ " .align 4\n" -+ " .long 1b,7b\n" -+ " .long 3b,8b\n" -+ " .long 5b,9b\n" -+ ".previous" -+ : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp) -+ : "d"(n & 3), "0"(to), "1"(from), "2"(n/4) -+ : "d0", "memory"); -+ return n; -+} -+EXPORT_SYMBOL(__generic_copy_from_user); -+ -+ -+unsigned long __generic_copy_to_user(void *to, const void *from, -+ unsigned long n) -+{ -+ unsigned long tmp; -+ __asm__ __volatile__ -+ (" tstl %2\n" -+ " jeq 3f\n" -+ "1: movel (%1)+,%3\n" -+ "22:movel %3,(%0)+\n" -+ "2: subql #1,%2\n" -+ " jne 1b\n" -+ "3: movel %4,%2\n" -+ " bclr #1,%2\n" -+ " jeq 4f\n" -+ " movew (%1)+,%3\n" -+ "24:movew %3,(%0)+\n" -+ "4: bclr #0,%2\n" -+ " jeq 5f\n" -+ " moveb (%1)+,%3\n" -+ "25:moveb %3,(%0)+\n" -+ "5:\n" -+ ".section .fixup,\"ax\"\n" -+ " .even\n" -+ "60:addql #1,%2\n" -+ "6: lsll #2,%2\n" -+ " addl %4,%2\n" -+ " jra 5b\n" -+ "7: addql #2,%2\n" -+ " jra 5b\n" -+ "8: addql #1,%2\n" -+ " jra 5b\n" -+ ".previous\n" -+ ".section __ex_table,\"a\"\n" -+ " .align 4\n" -+ " .long 1b,60b\n" -+ " .long 22b,6b\n" -+ " .long 2b,6b\n" -+ " .long 24b,7b\n" -+ " .long 3b,60b\n" -+ " .long 4b,7b\n" -+ " .long 25b,8b\n" -+ " .long 5b,8b\n" -+ ".previous" -+ : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp) -+ : "r"(n & 3), "0"(to), "1"(from), "2"(n / 4) -+ : "memory"); -+ return n; -+} -+EXPORT_SYMBOL(__generic_copy_to_user); -+ -+/* -+ * Copy a null terminated string from userspace. -+ */ -+ -+long strncpy_from_user(char *dst, const char *src, long count) -+{ -+ long res = -EFAULT; -+ if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */ -+ return res; -+ if (count == 0) return count; -+ __asm__ __volatile__ -+ ("1: moveb (%2)+,%%d0\n" -+ "12:moveb %%d0,(%1)+\n" -+ " jeq 2f\n" -+ " subql #1,%3\n" -+ " jne 1b\n" -+ "2: subl %3,%0\n" -+ "3:\n" -+ ".section .fixup,\"ax\"\n" -+ " .even\n" -+ "4: movel %4,%0\n" -+ " jra 3b\n" -+ ".previous\n" -+ ".section __ex_table,\"a\"\n" -+ " .align 4\n" -+ " .long 1b,4b\n" -+ " .long 12b,4b\n" -+ ".previous" -+ : "=d"(res), "=a"(dst), "=a"(src), "=d"(count) -+ : "i"(-EFAULT), "0"(count), "1"(dst), "2"(src), "3"(count) -+ : "d0", "memory"); -+ return res; -+} -+EXPORT_SYMBOL(strncpy_from_user); -+ -+/* -+ * Return the size of a string (including the ending 0) -+ * -+ * Return 0 on exception, a value greater than N if too long -+ */ -+long strnlen_user(const char *src, long n) -+{ -+ long res = -EFAULT; -+ if (!(access_ok(VERIFY_READ, src, 1))) /* --tym-- */ -+ return res; -+ -+ res = -(long)src; -+ __asm__ __volatile__ -+ ("1:\n" -+ " tstl %2\n" -+ " jeq 3f\n" -+ "2: moveb (%1)+,%%d0\n" -+ "22:\n" -+ " subql #1,%2\n" -+ " tstb %%d0\n" -+ " jne 1b\n" -+ " jra 4f\n" -+ "3:\n" -+ " addql #1,%0\n" -+ "4:\n" -+ " addl %1,%0\n" -+ "5:\n" -+ ".section .fixup,\"ax\"\n" -+ " .even\n" -+ "6: moveq %3,%0\n" -+ " jra 5b\n" -+ ".previous\n" -+ ".section __ex_table,\"a\"\n" -+ " .align 4\n" -+ " .long 2b,6b\n" -+ " .long 22b,6b\n" -+ ".previous" -+ : "=d"(res), "=a"(src), "=d"(n) -+ : "i"(0), "0"(res), "1"(src), "2"(n) -+ : "d0"); -+ return res; -+} -+EXPORT_SYMBOL(strnlen_user); -+ -+ -+/* -+ * Zero Userspace -+ */ -+ -+unsigned long __clear_user(void *to, unsigned long n) -+{ -+ __asm__ __volatile__ -+ (" tstl %1\n" -+ " jeq 3f\n" -+ "1: movel %3,(%0)+\n" -+ "2: subql #1,%1\n" -+ " jne 1b\n" -+ "3: movel %2,%1\n" -+ " bclr #1,%1\n" -+ " jeq 4f\n" -+ "24:movew %3,(%0)+\n" -+ "4: bclr #0,%1\n" -+ " jeq 5f\n" -+ "25:moveb %3,(%0)+\n" -+ "5:\n" -+ ".section .fixup,\"ax\"\n" -+ " .even\n" -+ "61:addql #1,%1\n" -+ "6: lsll #2,%1\n" -+ " addl %2,%1\n" -+ " jra 5b\n" -+ "7: addql #2,%1\n" -+ " jra 5b\n" -+ "8: addql #1,%1\n" -+ " jra 5b\n" -+ ".previous\n" -+ ".section __ex_table,\"a\"\n" -+ " .align 4\n" -+ " .long 1b,61b\n" -+ " .long 2b,6b\n" -+ " .long 3b,61b\n" -+ " .long 24b,7b\n" -+ " .long 4b,7b\n" -+ " .long 25b,8b\n" -+ " .long 5b,8b\n" -+ ".previous" -+ : "=a"(to), "=d"(n) -+ : "r"(n & 3), "d"(0), "0"(to), "1"(n/4)); -+ return n; -+} -+EXPORT_SYMBOL(__clear_user); -+ -+#endif /* CONFIG_COLDFIRE */ -+ ---- a/arch/m68k/Makefile -+++ b/arch/m68k/Makefile -@@ -16,7 +16,9 @@ - KBUILD_DEFCONFIG := amiga_defconfig - - # override top level makefile -+ifndef CONFIG_COLDFIRE - AS += -m68020 -+endif - LDFLAGS := -m m68kelf - LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds - ifneq ($(SUBARCH),$(ARCH)) -@@ -30,12 +32,18 @@ ifdef CONFIG_SUN3 - LDFLAGS_vmlinux = -N - endif - -+ifdef CONFIG_COLDFIRE -+# OBJCOPYFLAGS := -R .note -R .note.gnu.build-id -R .comment -S -+# LDFLAGS_vmlinux = --verbose -+endif -+ - CHECKFLAGS += -D__mc68000__ - - # without -fno-strength-reduce the 53c7xx.c driver fails ;-( - KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2 - - # enable processor switch if compiled only for a single cpu -+ifndef CONFIG_COLDFIRE - ifndef CONFIG_M68020 - ifndef CONFIG_M68030 - -@@ -49,6 +57,16 @@ endif - - endif - endif -+endif -+ -+ifdef CONFIG_M5445X -+KBUILD_CFLAGS += -march=isac -mcpu=54455 -msoft-float -g -+KBUILD_AFLAGS += -march=isac -mcpu=54455 -msoft-float -+endif -+ifdef CONFIG_M547X_8X -+KBUILD_CFLAGS += -mcfv4e -g -+KBUILD_AFLAGS += -mcfv4e -+endif - - ifdef CONFIG_KGDB - # If configured for kgdb support, include debugging infos and keep the -@@ -57,8 +75,12 @@ KBUILD_CFLAGS := $(subst -fomit-frame-po - endif - - ifndef CONFIG_SUN3 -+ifndef CONFIG_COLDFIRE - head-y := arch/m68k/kernel/head.o - else -+head-y := arch/m68k/coldfire/head.o -+endif -+else - head-y := arch/m68k/kernel/sun3-head.o - endif - -@@ -79,6 +101,7 @@ core-$(CONFIG_SUN3) += arch/m68k/sun3/ - core-$(CONFIG_M68040) += arch/m68k/fpsp040/ - core-$(CONFIG_M68060) += arch/m68k/ifpsp060/ - core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/ -+core-$(CONFIG_COLDFIRE) += arch/m68k/coldfire/ - - all: zImage - ---- a/arch/m68k/mm/cache.c -+++ b/arch/m68k/mm/cache.c -@@ -10,7 +10,11 @@ - #include <asm/pgalloc.h> - #include <asm/traps.h> - -+#ifdef CONFIG_COLDFIRE -+#include <asm/cfcache.h> -+#endif /* CONFIG_COLDFIRE */ - -+#ifndef CONFIG_COLDFIRE - static unsigned long virt_to_phys_slow(unsigned long vaddr) - { - if (CPU_IS_060) { -@@ -69,11 +73,18 @@ static unsigned long virt_to_phys_slow(u - } - return 0; - } -+#endif /* CONFIG_COLDFIRE */ -+ - - /* Push n pages at kernel virtual address and clear the icache */ - /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ - void flush_icache_range(unsigned long address, unsigned long endaddr) - { -+#ifdef CONFIG_COLDFIRE -+// JKM -- hack until new cpushl stuff is in -+// cf_icache_flush_range(address, endaddr); -+ flush_icache(); -+#else /* !CONFIG_COLDFIRE */ - - if (CPU_IS_040_OR_060) { - address &= PAGE_MASK; -@@ -94,9 +105,11 @@ void flush_icache_range(unsigned long ad - : "=&d" (tmp) - : "di" (FLUSH_I)); - } -+#endif /* CONFIG_COLDFIRE */ - } - EXPORT_SYMBOL(flush_icache_range); - -+#ifndef CONFIG_COLDFIRE - void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long addr, int len) - { -@@ -115,4 +128,5 @@ void flush_icache_user_range(struct vm_a - : "di" (FLUSH_I)); - } - } -+#endif /* CONFIG_COLDFIRE */ - ---- /dev/null -+++ b/arch/m68k/mm/cf-mmu.c -@@ -0,0 +1,260 @@ -+/* -+ * linux/arch/m68k/mm/cf-mmu.c -+ * -+ * Based upon linux/arch/m68k/mm/sun3mmu.c -+ * Based upon linux/arch/ppc/mm/mmu_context.c -+ * -+ * Implementations of mm routines specific to the Coldfire MMU. -+ * -+ * Copyright (c) 2008 Freescale Semiconductor, Inc. -+ */ -+ -+#include <linux/signal.h> -+#include <linux/sched.h> -+#include <linux/mm.h> -+#include <linux/swap.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/types.h> -+#include <linux/init.h> -+#ifdef CONFIG_BLK_DEV_RAM -+#include <linux/blkdev.h> -+#endif -+#include <linux/bootmem.h> -+ -+#include <asm/setup.h> -+#include <asm/uaccess.h> -+#include <asm/page.h> -+#include <asm/pgtable.h> -+#include <asm/system.h> -+#include <asm/machdep.h> -+#include <asm/io.h> -+#include <asm/mmu_context.h> -+#include <asm/cf_pgalloc.h> -+ -+#include <asm/coldfire.h> -+#include <asm/tlbflush.h> -+ -+#define KMAPAREA(x) ((x >= VMALLOC_START) && ( x < KMAP_END)) -+ -+#undef DEBUG -+ -+mm_context_t next_mmu_context; -+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1]; -+ -+atomic_t nr_free_contexts; -+struct mm_struct *context_mm[LAST_CONTEXT+1]; -+void steal_context(void); -+ -+ -+const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n"; -+ -+extern unsigned long empty_bad_page_table; -+extern unsigned long empty_bad_page; -+extern unsigned long num_pages; -+ -+extern char __init_begin, __init_end; -+ -+void free_initmem(void) -+{ -+#if 0 -+ unsigned long addr; -+ unsigned long start = (unsigned long)&__init_begin; -+ unsigned long end = (unsigned long)&__init_end; -+ -+ printk(KERN_INFO "free_initmem: __init_begin = 0x%lx __init_end = 0x%lx\n", start, end); -+ -+ addr = (unsigned long)&__init_begin; -+ for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) { -+ /* not currently used */ -+ virt_to_page(addr)->flags &= ~(1 << PG_reserved); -+ init_page_count(virt_to_page(addr)); -+ free_page(addr); -+ totalram_pages++; -+ } -+#endif -+} -+ -+/* Coldfire paging_init derived from sun3 */ -+void __init paging_init(void) -+{ -+ pgd_t * pg_dir; -+ pte_t * pg_table; -+ int i; -+ unsigned long address; -+ unsigned long next_pgtable; -+ unsigned long bootmem_end; -+ unsigned long zones_size[MAX_NR_ZONES]; -+ unsigned long size; -+ enum zone_type zone; -+ -+ empty_zero_page = (void *)alloc_bootmem_pages(PAGE_SIZE); -+ memset((void *)empty_zero_page, 0, PAGE_SIZE); -+ -+ pg_dir = swapper_pg_dir; -+ memset(swapper_pg_dir, 0, sizeof (swapper_pg_dir)); -+ -+ size = num_pages * sizeof(pte_t); -+ size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1); -+ next_pgtable = (unsigned long)alloc_bootmem_pages(size); -+ -+ bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK; -+ pg_dir += PAGE_OFFSET >> PGDIR_SHIFT; -+ -+ address = PAGE_OFFSET; -+ while (address < (unsigned long)high_memory) -+ { -+ pg_table = (pte_t *)next_pgtable; -+ next_pgtable += PTRS_PER_PTE * sizeof (pte_t); -+ pgd_val(*pg_dir) = (unsigned long) pg_table; -+ pg_dir++; -+ -+ /* now change pg_table to kernel virtual addresses */ -+ for (i=0; i<PTRS_PER_PTE; ++i, ++pg_table) -+ { -+ pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT); -+ if (address >= (unsigned long)high_memory) -+ pte_val (pte) = 0; -+ -+ set_pte (pg_table, pte); -+ address += PAGE_SIZE; -+ } -+ } -+ -+ current->mm = NULL; -+ -+ /* clear zones */ -+ for (zone = 0; zone < MAX_NR_ZONES; zone++) -+ zones_size[zone] = 0x0; -+ -+ /* allocate the bottom 32M (0x40x 0x41x) to DMA - head.S marks them NO CACHE */ -+ /* JKM - this should be changed to allocate from the TOP (0x4f,0x4e) but the -+ * allocator is being a bit challenging */ -+ zones_size[ZONE_DMA] = (32*1024*1024) >> PAGE_SHIFT; -+ -+ /* allocate the rest to NORMAL - head.S marks them CACHE */ -+ zones_size[ZONE_NORMAL] = (((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT) - zones_size[0]; -+ -+ free_area_init(zones_size); -+} -+ -+ -+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) -+{ -+ struct mm_struct *mm; -+ pgd_t *pgd; -+ pmd_t *pmd; -+ pte_t *pte; -+ unsigned long mmuar; -+ int asid; -+ int flags; -+ -+ local_save_flags(flags); -+ local_irq_disable(); -+ -+ mmuar = ( dtlb ) ? regs->mmuar -+ : regs->pc + (extension_word * sizeof(long)); -+ -+ mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm; -+ -+ if (!mm) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ -+ pgd = pgd_offset(mm, mmuar); -+ if (pgd_none(*pgd)) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ -+ pmd = pmd_offset(pgd, mmuar); -+ if (pmd_none(*pmd)) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ -+ pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar) -+ : pte_offset_map(pmd, mmuar); -+ if (pte_none(*pte) || !pte_present(*pte)) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ -+ if (write) { -+ if (!pte_write(*pte)) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ set_pte(pte, pte_mkdirty(*pte)); -+ } -+ -+ set_pte(pte, pte_mkyoung(*pte)); -+ asid = mm->context & 0xff; -+ if (!pte_dirty(*pte) && !KMAPAREA(mmuar)) -+ set_pte(pte, pte_wrprotect(*pte)); -+ -+ *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT) -+ | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT) -+ | MMUTR_V; -+ -+ *MMUDR = (pte_val(*pte) & PAGE_MASK) -+ | ((pte->pte) & CF_PAGE_MMUDR_MASK) -+ | MMUDR_SZ8K | MMUDR_X; -+ -+ if ( dtlb ) -+ *MMUOR = MMUOR_ACC | MMUOR_UAA; -+ else -+ *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA; -+ -+ asm("nop"); -+ -+#ifdef DEBUG -+ printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), -+ (pte_val(*pte) & PAGE_MASK)); -+#endif -+ local_irq_restore(flags); -+ return (0); -+} -+ -+ -+/* The following was taken from arch/ppc/mmu_context.c -+ * -+ * Initialize the context management stuff. -+ */ -+void __init mmu_context_init(void) -+{ -+ /* -+ * Some processors have too few contexts to reserve one for -+ * init_mm, and require using context 0 for a normal task. -+ * Other processors reserve the use of context zero for the kernel. -+ * This code assumes FIRST_CONTEXT < 32. -+ */ -+ context_map[0] = (1 << FIRST_CONTEXT) - 1; -+ next_mmu_context = FIRST_CONTEXT; -+ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1); -+} -+ -+/* -+ * Steal a context from a task that has one at the moment. -+ * This is only used on 8xx and 4xx and we presently assume that -+ * they don't do SMP. If they do then thicfpgalloc.hs will have to check -+ * whether the MM we steal is in use. -+ * We also assume that this is only used on systems that don't -+ * use an MMU hash table - this is true for 8xx and 4xx. -+ * This isn't an LRU system, it just frees up each context in -+ * turn (sort-of pseudo-random replacement :). This would be the -+ * place to implement an LRU scheme if anyone was motivated to do it. -+ * -- paulus -+ */ -+void steal_context(void) -+{ -+ struct mm_struct *mm; -+ /* free up context `next_mmu_context' */ -+ /* if we shouldn't free context 0, don't... */ -+ if (next_mmu_context < FIRST_CONTEXT) -+ next_mmu_context = FIRST_CONTEXT; -+ mm = context_mm[next_mmu_context]; -+ flush_tlb_mm(mm); -+ destroy_context(mm); -+} ---- /dev/null -+++ b/arch/m68k/mm/cf-mmu.c.orig -@@ -0,0 +1,265 @@ -+/* -+ * linux/arch/m68k/mm/cf-mmu.c -+ * -+ * Based upon linux/arch/m68k/mm/sun3mmu.c -+ * Based upon linux/arch/ppc/mm/mmu_context.c -+ * -+ * Implementations of mm routines specific to the Coldfire MMU. -+ * -+ * Copyright (c) 2008 Freescale Semiconductor, Inc. -+ */ -+ -+#include <linux/signal.h> -+#include <linux/sched.h> -+#include <linux/mm.h> -+#include <linux/swap.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/types.h> -+#include <linux/init.h> -+#ifdef CONFIG_BLK_DEV_RAM -+#include <linux/blkdev.h> -+#endif -+#include <linux/bootmem.h> -+ -+#include <asm/setup.h> -+#include <asm/uaccess.h> -+#include <asm/page.h> -+#include <asm/pgtable.h> -+#include <asm/system.h> -+#include <asm/machdep.h> -+#include <asm/io.h> -+#include <asm/mmu_context.h> -+#include <asm/cf_pgalloc.h> -+ -+#include <asm/coldfire.h> -+#include <asm/tlbflush.h> -+ -+#if PAGE_OFFSET == CONFIG_SDRAM_BASE -+#define KERNRAM(x) ((x >= PAGE_OFFSET) && (x < (PAGE_OFFSET + CONFIG_SDRAM_SIZE))) -+#else -+#define KERNRAM(x) (x >= PAGE_OFFSET) -+#endif -+ -+mm_context_t next_mmu_context; -+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1]; -+ -+atomic_t nr_free_contexts; -+struct mm_struct *context_mm[LAST_CONTEXT+1]; -+void steal_context(void); -+ -+ -+const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n"; -+ -+extern unsigned long empty_bad_page_table; -+extern unsigned long empty_bad_page; -+extern unsigned long num_pages; -+ -+extern char __init_begin, __init_end; -+ -+void free_initmem(void) -+{ -+#if 0 -+ unsigned long addr; -+ unsigned long start = (unsigned long)&__init_begin; -+ unsigned long end = (unsigned long)&__init_end; -+ -+/* -+ * JKM -- revisit -- the latest round of vmlinux.lds changes has caused -+ * a little grief with how init areas are handled. With the new toolchain -+ * release I'll fix this. -+ */ -+ printk(KERN_INFO "free_initmem: __init_begin = 0x%lx __init_end = 0x%lx\n", start, end); -+ -+ addr = (unsigned long)&__init_begin; -+ for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) { -+ /* not currently used */ -+ virt_to_page(addr)->flags &= ~(1 << PG_reserved); -+ init_page_count(virt_to_page(addr)); -+ free_page(addr); -+ totalram_pages++; -+ } -+#endif -+} -+ -+/* Coldfire paging_init derived from sun3 */ -+void __init paging_init(void) -+{ -+ pgd_t * pg_dir; -+ pte_t * pg_table; -+ int i; -+ unsigned long address; -+ unsigned long next_pgtable; -+ unsigned long bootmem_end; -+ unsigned long zones_size[MAX_NR_ZONES]; -+ unsigned long size; -+ enum zone_type zone; -+ -+ empty_zero_page = (void *)alloc_bootmem_pages(PAGE_SIZE); -+ memset((void *)empty_zero_page, 0, PAGE_SIZE); -+ -+ pg_dir = swapper_pg_dir; -+ memset(swapper_pg_dir, 0, sizeof (swapper_pg_dir)); -+ -+ size = num_pages * sizeof(pte_t); -+ size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1); -+ next_pgtable = (unsigned long)alloc_bootmem_pages(size); -+ -+ bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK; -+ pg_dir += PAGE_OFFSET >> PGDIR_SHIFT; -+ -+ address = PAGE_OFFSET; -+ while (address < (unsigned long)high_memory) -+ { -+ pg_table = (pte_t *)next_pgtable; -+ next_pgtable += PTRS_PER_PTE * sizeof (pte_t); -+ pgd_val(*pg_dir) = (unsigned long) pg_table; -+ pg_dir++; -+ -+ /* now change pg_table to kernel virtual addresses */ -+ for (i=0; i<PTRS_PER_PTE; ++i, ++pg_table) -+ { -+ pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT); -+ if (address >= (unsigned long)high_memory) -+ pte_val (pte) = 0; -+ -+ set_pte (pg_table, pte); -+ address += PAGE_SIZE; -+ } -+ } -+ -+ current->mm = NULL; -+ -+ /* clear zones */ -+ for (zone = 0; zone < MAX_NR_ZONES; zone++) -+ zones_size[zone] = 0x0; -+ -+ /* allocate the bottom 32M (0x40x 0x41x) to DMA - head.S marks them NO CACHE */ -+ /* JKM - this should be changed to allocate from the TOP (0x4f,0x4e) but the -+ * allocator is being a bit challenging */ -+ zones_size[ZONE_DMA] = (32*1024*1024) >> PAGE_SHIFT; -+ -+ /* allocate the rest to NORMAL - head.S marks them CACHE */ -+ zones_size[ZONE_NORMAL] = (((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT) - zones_size[0]; -+ -+ free_area_init(zones_size); -+} -+ -+ -+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) -+{ -+ struct mm_struct *mm; -+ pgd_t *pgd; -+ pmd_t *pmd; -+ pte_t *pte; -+ unsigned long mmuar; -+ int asid; -+ int flags; -+ -+ local_save_flags(flags); -+ local_irq_disable(); -+ -+ mmuar = ( dtlb ) ? regs->mmuar -+ : regs->pc + (extension_word * sizeof(long)); -+ -+ mm = (!user_mode(regs) && KERNRAM(mmuar)) ? &init_mm : current->mm; -+ -+ if (!mm) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ -+ pgd = pgd_offset(mm, mmuar); -+ if (pgd_none(*pgd)) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ -+ pmd = pmd_offset(pgd, mmuar); -+ if (pmd_none(*pmd)) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ -+ pte = (KERNRAM(mmuar)) ? pte_offset_kernel(pmd, mmuar) -+ : pte_offset_map(pmd, mmuar); -+ if (pte_none(*pte) || !pte_present(*pte)) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ -+ if (write) { -+ if (!pte_write(*pte)) { -+ local_irq_restore(flags); -+ return (-1); -+ } -+ set_pte(pte, pte_mkdirty(*pte)); -+ } -+ -+ set_pte(pte, pte_mkyoung(*pte)); -+ asid = mm->context & 0xff; -+ if (!pte_dirty(*pte) && !KERNRAM(mmuar)) -+ set_pte(pte, pte_wrprotect(*pte)); -+ -+ *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT) -+ | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT) -+ | MMUTR_V; -+ -+ *MMUDR = (pte_val(*pte) & PAGE_MASK) -+ | ((pte->pte) & CF_PAGE_MMUDR_MASK) -+ | MMUDR_SZ8K | MMUDR_X; -+ -+ if ( dtlb ) -+ *MMUOR = MMUOR_ACC | MMUOR_UAA; -+ else -+ *MMUOR = MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA; -+ -+ asm("nop"); -+ -+ /*printk("cf_tlb_miss: va=%lx, pa=%lx\n", (mmuar & PAGE_MASK), -+ (pte_val(*pte) & PAGE_MASK));*/ -+ local_irq_restore(flags); -+ return (0); -+} -+ -+ -+/* The following was taken from arch/ppc/mmu_context.c -+ * -+ * Initialize the context management stuff. -+ */ -+void __init mmu_context_init(void) -+{ -+ /* -+ * Some processors have too few contexts to reserve one for -+ * init_mm, and require using context 0 for a normal task. -+ * Other processors reserve the use of context zero for the kernel. -+ * This code assumes FIRST_CONTEXT < 32. -+ */ -+ context_map[0] = (1 << FIRST_CONTEXT) - 1; -+ next_mmu_context = FIRST_CONTEXT; -+ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1); -+} -+ -+/* -+ * Steal a context from a task that has one at the moment. -+ * This is only used on 8xx and 4xx and we presently assume that -+ * they don't do SMP. If they do then thicfpgalloc.hs will have to check -+ * whether the MM we steal is in use. -+ * We also assume that this is only used on systems that don't -+ * use an MMU hash table - this is true for 8xx and 4xx. -+ * This isn't an LRU system, it just frees up each context in -+ * turn (sort-of pseudo-random replacement :). This would be the -+ * place to implement an LRU scheme if anyone was motivated to do it. -+ * -- paulus -+ */ -+void steal_context(void) -+{ -+ struct mm_struct *mm; -+ /* free up context `next_mmu_context' */ -+ /* if we shouldn't free context 0, don't... */ -+ if (next_mmu_context < FIRST_CONTEXT) -+ next_mmu_context = FIRST_CONTEXT; -+ mm = context_mm[next_mmu_context]; -+ flush_tlb_mm(mm); -+ destroy_context(mm); -+} ---- a/arch/m68k/mm/hwtest.c -+++ b/arch/m68k/mm/hwtest.c -@@ -25,6 +25,7 @@ - - #include <linux/module.h> - -+#ifndef CONFIG_COLDFIRE - int hwreg_present( volatile void *regp ) - { - int ret = 0; -@@ -82,4 +83,5 @@ int hwreg_write( volatile void *regp, un - return( ret ); - } - EXPORT_SYMBOL(hwreg_write); -+#endif - ---- a/arch/m68k/mm/init.c -+++ b/arch/m68k/mm/init.c -@@ -122,7 +122,6 @@ void __init mem_init(void) - if (MACH_IS_ATARI) - atari_stram_mem_init_hook(); - #endif -- - /* this will put all memory onto the freelists */ - totalram_pages = num_physpages = 0; - for_each_online_pgdat(pgdat) { -@@ -146,7 +145,7 @@ void __init mem_init(void) - } - } - --#ifndef CONFIG_SUN3 -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) - /* insert pointer tables allocated so far into the tablelist */ - init_pointer_table((unsigned long)kernel_pg_dir); - for (i = 0; i < PTRS_PER_PGD; i++) { ---- a/arch/m68k/mm/kmap.c -+++ b/arch/m68k/mm/kmap.c -@@ -24,7 +24,11 @@ - - #undef DEBUG - -+#ifndef CONFIG_COLDFIRE - #define PTRTREESIZE (256*1024) -+#else -+#define PTRTREESIZE PAGE_SIZE -+#endif - - /* - * For 040/060 we can use the virtual memory area like other architectures, -@@ -50,7 +54,11 @@ static inline void free_io_area(void *ad - - #else - -+#ifdef CONFIG_COLDFIRE -+#define IO_SIZE PAGE_SIZE -+#else - #define IO_SIZE (256*1024) -+#endif - - static struct vm_struct *iolist; - -@@ -125,8 +133,34 @@ void __iomem *__ioremap(unsigned long ph - } - #endif - -+#ifdef CONFIG_M5445X -+ if (physaddr >= 0xf0000000) { -+ /* -+ * On the M5445x processors an ACR is setup to map -+ * the 0xF0000000 range into kernel memory as -+ * non-cacheable. -+ */ -+ return (void __iomem *)physaddr; -+ } -+#endif -+ -+#ifdef CONFIG_M547X_8X -+ if (physaddr >= 0xf0000000) { -+ /* -+ * On the M547x/M548x processors an ACR is setup to map -+ * the 0xF0000000 range into kernel memory as -+ * non-cacheable. -+ */ -+ return (void __iomem *)physaddr; -+ } -+ if ((physaddr >= 0xd0000000) && (physaddr + size < 0xd800ffff)) { -+ printk("ioremap:PCI 0x%lx,0x%lx(%d) - PCI area hit\n", physaddr, size, cacheflag); -+ return (void *)physaddr; -+ } -+#endif -+ - #ifdef DEBUG -- printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag); -+ printk("ioremap: paddr=0x%lx,size=0x%lx(%d) - ", physaddr, size, cacheflag); - #endif - /* - * Mappings have to be aligned -@@ -145,7 +179,7 @@ void __iomem *__ioremap(unsigned long ph - virtaddr = (unsigned long)area->addr; - retaddr = virtaddr + offset; - #ifdef DEBUG -- printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr); -+ printk(" paddr=0x%lx,vaddr=0x%lx,retaddr=0x%lx", physaddr, virtaddr, retaddr); - #endif - - /* -@@ -170,7 +204,12 @@ void __iomem *__ioremap(unsigned long ph - break; - } - } else { -+#ifndef CONFIG_COLDFIRE - physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY); -+#else -+ physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \ -+ _PAGE_READWRITE); -+#endif - switch (cacheflag) { - case IOMAP_NOCACHE_SER: - case IOMAP_NOCACHE_NONSER: -@@ -249,7 +288,12 @@ void __iounmap(void *addr, unsigned long - pgd_t *pgd_dir; - pmd_t *pmd_dir; - pte_t *pte_dir; -- -+#ifdef CONFIG_M547X_8X -+ if ((addr >= (void*)0xd0000000) && (addr + size < (void*)0xd800ffff)) { -+ printk("%s: PCI address\n",__FUNCTION__); -+ return; -+ } -+#endif - while ((long)size > 0) { - pgd_dir = pgd_offset_k(virtaddr); - if (pgd_bad(*pgd_dir)) { ---- a/arch/m68k/mm/Makefile -+++ b/arch/m68k/mm/Makefile -@@ -6,3 +6,4 @@ obj-y := cache.o init.o fault.o hwtest. - - obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o - obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o -+obj-$(CONFIG_MMU_CFV4E) += cf-mmu.o kmap.o memory.o ---- a/arch/m68k/mm/memory.c -+++ b/arch/m68k/mm/memory.c -@@ -127,6 +127,7 @@ int free_pointer_table (pmd_t *ptable) - return 0; - } - -+#ifndef CONFIG_COLDFIRE - /* invalidate page in both caches */ - static inline void clear040(unsigned long paddr) - { -@@ -173,6 +174,7 @@ static inline void pushcl040(unsigned lo - clear040(paddr); - local_irq_restore(flags); - } -+#endif /* CONFIG_COLDFIRE */ - - /* - * 040: Hit every page containing an address in the range paddr..paddr+len-1. -@@ -203,6 +205,11 @@ static inline void pushcl040(unsigned lo - - void cache_clear (unsigned long paddr, int len) - { -+#ifdef CONFIG_COLDFIRE -+// JKM -- revise to use proper caching -+// cf_cache_clear(paddr, len); -+ flush_bcache(); -+#else - if (CPU_IS_040_OR_060) { - int tmp; - -@@ -237,6 +244,7 @@ void cache_clear (unsigned long paddr, i - if(mach_l2_flush) - mach_l2_flush(0); - #endif -+#endif /* CONFIG_COLDFIRE */ - } - EXPORT_SYMBOL(cache_clear); - -@@ -250,6 +258,11 @@ EXPORT_SYMBOL(cache_clear); - - void cache_push (unsigned long paddr, int len) - { -+#ifdef CONFIG_COLDFIRE -+// JKM -- revise to use proper caching -+// cf_cache_push(paddr, len); -+ flush_bcache(); -+#else - if (CPU_IS_040_OR_060) { - int tmp = PAGE_SIZE; - -@@ -290,6 +303,7 @@ void cache_push (unsigned long paddr, in - if(mach_l2_flush) - mach_l2_flush(1); - #endif -+#endif /* CONFIG_COLDFIRE */ - } - EXPORT_SYMBOL(cache_push); - ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -6,7 +6,7 @@ menuconfig ATA - tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" - depends on HAS_IOMEM - depends on BLOCK -- depends on !(M32R || M68K) || BROKEN -+ depends on !M32R || BROKEN - depends on !SUN4 || BROKEN - select SCSI - ---help--- -@@ -679,4 +679,13 @@ config PATA_BF54X - - If unsure, say N. - -+config PATA_FSL -+ tristate "Freescale on-chip PATA support" -+ depends on (ARCH_MX3 || ARCH_MX27 || PPC_512x || M54455) -+ help -+ On Freescale processors, say Y here if you wish to use the on-chip -+ ATA interface. -+ -+ If you are unsure, say N to this. -+ - endif # ATA ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -1,4 +1,3 @@ -- - obj-$(CONFIG_ATA) += libata.o - - obj-$(CONFIG_SATA_AHCI) += ahci.o -@@ -71,6 +70,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o - obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o - obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o - obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o -+obj-$(CONFIG_PATA_FSL) += pata_fsl.o - # Should be last but two libata driver - obj-$(CONFIG_PATA_ACPI) += pata_acpi.o - # Should be last but one libata driver ---- /dev/null -+++ b/drivers/ata/pata_fsl.c -@@ -0,0 +1,814 @@ -+/* -+ * Freescale integrated PATA driver -+ */ -+ -+/* -+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/blkdev.h> -+#include <scsi/scsi_host.h> -+#include <linux/ata.h> -+#include <linux/libata.h> -+#include <linux/platform_device.h> -+#include <linux/fsl_devices.h> -+#ifdef CONFIG_FSL_PATA_USE_DMA -+#include <asm/dma.h> -+#endif -+ -+#define DRV_NAME "pata_fsl" -+#define DRV_VERSION "1.0" -+ -+#ifdef CONFIG_M54455 -+#define WRITE_ATA8(val, reg) \ -+ __raw_writeb(val, (ata_regs + reg)); -+#define WRITE_ATA16(val, reg) \ -+ __raw_writew(val, (ata_regs + reg)); -+#else -+#define WRITE_ATA8(val, reg) \ -+ __raw_writel(val, (ata_regs + reg)); -+#define WRITE_ATA16(val, reg) \ -+ __raw_writel(val, (ata_regs + reg)); -+#endif -+ -+struct pata_fsl_priv { -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ int ultra; -+#endif -+ u8 *fsl_ata_regs; -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ int dma_rchan; -+ int dma_wchan; -+ int dma_done; -+ int dma_dir; -+#endif -+}; -+ -+enum { -+ /* various constants */ -+ -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ FSL_ATA_MAX_SG_LEN = 65534, -+#endif -+ -+ /* offsets to registers */ -+ -+ FSL_ATA_TIMING_REGS = 0x00, -+ FSL_ATA_FIFO_FILL = 0x20, -+ FSL_ATA_CONTROL = 0x24, -+ FSL_ATA_INT_PEND = 0x28, -+ FSL_ATA_INT_EN = 0x2C, -+ FSL_ATA_INT_CLEAR = 0x30, -+ FSL_ATA_FIFO_ALARM = 0x34, -+ FSL_ATA_DRIVE_DATA = 0xA0, -+ FSL_ATA_DRIVE_CONTROL = 0xD8, -+ -+ /* bits within FSL_ATA_CONTROL */ -+ -+ FSL_ATA_CTRL_FIFO_RST_B = 0x80, -+ FSL_ATA_CTRL_ATA_RST_B = 0x40, -+ FSL_ATA_CTRL_FIFO_TX_EN = 0x20, -+ FSL_ATA_CTRL_FIFO_RCV_EN = 0x10, -+ FSL_ATA_CTRL_DMA_PENDING = 0x08, -+ FSL_ATA_CTRL_DMA_ULTRA = 0x04, -+ FSL_ATA_CTRL_DMA_WRITE = 0x02, -+ FSL_ATA_CTRL_IORDY_EN = 0x01, -+ -+ /* bits within the interrupt control registers */ -+ -+ FSL_ATA_INTR_ATA_INTRQ1 = 0x80, -+ FSL_ATA_INTR_FIFO_UNDERFLOW = 0x40, -+ FSL_ATA_INTR_FIFO_OVERFLOW = 0x20, -+ FSL_ATA_INTR_CTRL_IDLE = 0x10, -+ FSL_ATA_INTR_ATA_INTRQ2 = 0x08, -+}; -+ -+/* -+ * This structure contains the timing parameters for -+ * ATA bus timing in the 5 PIO modes. The timings -+ * are in nanoseconds, and are converted to clock -+ * cycles before being stored in the ATA controller -+ * timing registers. -+ */ -+static struct { -+ short t0, t1, t2_8, t2_16, t2i, t4, t9, tA; -+} pio_specs[] = { -+ [0] = { -+ .t0 = 600, .t1 = 70, .t2_8 = 290, .t2_16 = 165, .t2i = 0, -+ .t4 = 30,.t9 = 20,.tA = 50 -+ }, -+ [1] = { -+ .t0 = 383, .t1 = 50, .t2_8 = 290, .t2_16 = 125, .t2i = 0, -+ .t4 = 20, .t9 = 15, .tA = 50 -+ }, -+ [2] = { -+ .t0 = 240, .t1 = 30, .t2_8 = 290, .t2_16 = 100, .t2i = 0, -+ .t4 = 15, .t9 = 10, .tA = 50 -+ }, -+ [3] = { -+ .t0 = 180, .t1 = 30, .t2_8 = 80, .t2_16 = 80, .t2i = 0, -+ .t4 = 10, .t9 = 10, .tA = 50 -+ }, -+ [4] = { -+ .t0 = 120, .t1 = 25, .t2_8 = 70, .t2_16 = 70, .t2i = 0, -+ .t4 = 10, .t9 = 10, .tA = 50 -+ }, -+}; -+ -+#define NR_PIO_SPECS (sizeof pio_specs / sizeof pio_specs[0]) -+ -+/* -+ * This structure contains the timing parameters for -+ * ATA bus timing in the 3 MDMA modes. The timings -+ * are in nanoseconds, and are converted to clock -+ * cycles before being stored in the ATA controller -+ * timing registers. -+ */ -+static struct { -+ short t0M, tD, tH, tJ, tKW, tM, tN, tJNH; -+} mdma_specs[] = { -+ [0] = { -+ .t0M = 480, .tD = 215, .tH = 20, .tJ = 20, .tKW = 215, -+ .tM = 50, .tN = 15, .tJNH = 20 -+ }, -+ [1] = { -+ .t0M = 150, .tD = 80, .tH = 15, .tJ = 5, .tKW = 50, -+ .tM = 30, .tN = 10, .tJNH = 15 -+ }, -+ [2] = { -+ .t0M = 120, .tD = 70, .tH = 10, .tJ = 5, .tKW = 25, -+ .tM = 25, .tN = 10, .tJNH = 10 -+ }, -+}; -+ -+#define NR_MDMA_SPECS (sizeof mdma_specs / sizeof mdma_specs[0]) -+ -+/* -+ * This structure contains the timing parameters for -+ * ATA bus timing in the 6 UDMA modes. The timings -+ * are in nanoseconds, and are converted to clock -+ * cycles before being stored in the ATA controller -+ * timing registers. -+ */ -+static struct { -+ short t2CYC, tCYC, tDS, tDH, tDVS, tDVH, tCVS, tCVH, tFS_min, tLI_max, -+ tMLI, tAZ, tZAH, tENV_min, tSR, tRFS, tRP, tACK, tSS, tDZFS; -+} udma_specs[] = { -+ [0] = { -+ .t2CYC = 235, .tCYC = 114, .tDS = 15, .tDH = 5, .tDVS = 70, -+ .tDVH = 6, .tCVS = 70, .tCVH = 6, .tFS_min = 0, -+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, -+ .tENV_min = 20, .tSR = 50, .tRFS = 75, .tRP = 160, -+ .tACK = 20, .tSS = 50, .tDZFS = 80 -+ }, -+ [1] = { -+ .t2CYC = 156, .tCYC = 75, .tDS = 10, .tDH = 5, .tDVS = 48, -+ .tDVH = 6, .tCVS = 48, .tCVH = 6, .tFS_min = 0, -+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, -+ .tENV_min = 20, .tSR = 30, .tRFS = 70, .tRP = 125, -+ .tACK = 20, .tSS = 50, .tDZFS = 63 -+ }, -+ [2] = { -+ .t2CYC = 117, .tCYC = 55, .tDS = 7, .tDH = 5, .tDVS = 34, -+ .tDVH = 6, .tCVS = 34, .tCVH = 6, .tFS_min = 0, -+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, -+ .tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100, -+ .tACK = 20, .tSS = 50, .tDZFS = 47 -+ }, -+ [3] = { -+ .t2CYC = 86, .tCYC = 39, .tDS = 7, .tDH = 5, .tDVS = 20, -+ .tDVH = 6, .tCVS = 20, .tCVH = 6, .tFS_min = 0, -+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, -+ .tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100, -+ .tACK = 20, .tSS = 50, .tDZFS = 35 -+ }, -+ [4] = { -+ .t2CYC = 57, .tCYC = 25, .tDS = 5, .tDH = 5, .tDVS = 7, -+ .tDVH = 6, .tCVS = 7, .tCVH = 6, .tFS_min = 0, -+ .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, -+ .tENV_min = 20, .tSR = 50, .tRFS = 60, .tRP = 100, -+ .tACK = 20, .tSS = 50, .tDZFS = 25 -+ }, -+ [5] = { -+ .t2CYC = 38, .tCYC = 17, .tDS = 4, .tDH = 5, .tDVS = 5, -+ .tDVH = 6, .tCVS = 10, .tCVH = 10, .tFS_min = 0, -+ .tLI_max = 75, .tMLI = 20, .tAZ = 10, .tZAH = 20, -+ .tENV_min = 20, .tSR = 20, .tRFS = 50, .tRP = 85, -+ .tACK = 20, .tSS = 50, .tDZFS = 40 -+ }, -+}; -+ -+#define NR_UDMA_SPECS (sizeof udma_specs / sizeof udma_specs[0]) -+ -+struct fsl_ata_time_regs { -+ u8 time_off, time_on, time_1, time_2w; -+ u8 time_2r, time_ax, time_pio_rdx, time_4; -+ u8 time_9, time_m, time_jn, time_d; -+ u8 time_k, time_ack, time_env, time_rpx; -+ u8 time_zah, time_mlix, time_dvh, time_dzfs; -+ u8 time_dvs, time_cvh, time_ss, time_cyc; -+}; -+ -+static void update_timing_config(struct fsl_ata_time_regs *tp, struct ata_host *host) -+{ -+ u32 *lp = (u32 *)tp; -+ struct pata_fsl_priv *priv = host->private_data; -+ u32 *ctlp = (u32 *)priv->fsl_ata_regs; -+ int i; -+ -+ /* -+ * JKM - this could have endianess issues on BE depending -+ * on how the controller is glued to the bus -- probably -+ * should rewrite this to write byte at a time. -+ */ -+ for (i = 0; i < 5; i++) { -+ __raw_writel(*lp, ctlp); -+ lp++; -+ ctlp++; -+ } -+ mb(); -+} -+ -+/*! -+ * Calculate values for the ATA bus timing registers and store -+ * them into the hardware. -+ * -+ * @param xfer_mode specifies XFER xfer_mode -+ * @param pdev specifies platform_device -+ * -+ * @return EINVAL speed out of range, or illegal mode -+ */ -+static int set_ata_bus_timing(u8 xfer_mode, struct platform_device *pdev) -+{ -+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) -+ pdev->dev.platform_data; -+ struct ata_host *host = dev_get_drvdata(&pdev->dev); -+ -+ /* get the bus clock cycle time, in ns */ -+ int T = 1 * 1000 * 1000 * 1000 / plat->get_clk_rate(); -+ struct fsl_ata_time_regs tr = {0}; -+ DPRINTK("clk_rate = %d T = %d\n",plat->get_clk_rate(), T); -+ -+ /* -+ * every mode gets the same t_off and t_on -+ */ -+ tr.time_off = 3; -+ tr.time_on = 3; -+ -+ if (xfer_mode >= XFER_UDMA_0) { -+ int speed = xfer_mode - XFER_UDMA_0; -+ if (speed >= NR_UDMA_SPECS) { -+ return -EINVAL; -+ } -+ tr.time_ack = (udma_specs[speed].tACK + T) / T; -+ tr.time_env = (udma_specs[speed].tENV_min + T) / T; -+ tr.time_rpx = (udma_specs[speed].tRP + T) / T + 2; -+ -+ tr.time_zah = (udma_specs[speed].tZAH + T) / T; -+ tr.time_mlix = (udma_specs[speed].tMLI + T) / T; -+ tr.time_dvh = (udma_specs[speed].tDVH + T) / T + 1; -+ tr.time_dzfs = (udma_specs[speed].tDZFS + T) / T; -+ -+ tr.time_dvs = (udma_specs[speed].tDVS + T) / T; -+ tr.time_cvh = (udma_specs[speed].tCVH + T) / T; -+ tr.time_ss = (udma_specs[speed].tSS + T) / T; -+ tr.time_cyc = (udma_specs[speed].tCYC + T) / T; -+ } else if (xfer_mode >= XFER_MW_DMA_0) { -+ int speed = xfer_mode - XFER_MW_DMA_0; -+ if (speed >= NR_MDMA_SPECS) { -+ return -EINVAL; -+ } -+ tr.time_m = (mdma_specs[speed].tM + T) / T; -+ tr.time_jn = (mdma_specs[speed].tJNH + T) / T; -+ tr.time_d = (mdma_specs[speed].tD + T) / T; -+ -+ tr.time_k = (mdma_specs[speed].tKW + T) / T; -+ } else { -+ int speed = xfer_mode - XFER_PIO_0; -+ if (speed >= NR_PIO_SPECS) { -+ return -EINVAL; -+ } -+ tr.time_1 = (pio_specs[speed].t1 + T) / T; -+ tr.time_2w = (pio_specs[speed].t2_8 + T) / T; -+ -+ tr.time_2r = (pio_specs[speed].t2_8 + T) / T; -+ tr.time_ax = (pio_specs[speed].tA + T) / T + 2; -+ tr.time_pio_rdx = 1; -+ tr.time_4 = (pio_specs[speed].t4 + T) / T; -+ -+ tr.time_9 = (pio_specs[speed].t9 + T) / T; -+ } -+ -+ update_timing_config(&tr, host); -+ -+ return 0; -+} -+ -+static void pata_fsl_set_piomode(struct ata_port *ap, struct ata_device *adev) -+{ -+ set_ata_bus_timing(adev->pio_mode, to_platform_device(ap->dev)); -+} -+ -+#ifdef CONFIG_FSL_PATA_USE_DMA -+static void pata_fsl_set_dmamode(struct ata_port *ap, struct ata_device *adev) -+{ -+ struct pata_fsl_priv *priv = ap->host->private_data; -+ -+ priv->ultra = adev->dma_mode >= XFER_UDMA_0; -+ -+ set_ata_bus_timing(adev->dma_mode, to_platform_device(ap->dev)); -+} -+#endif -+ -+static int pata_fsl_port_start(struct ata_port *ap) -+{ -+ return 0; -+} -+ -+#ifdef CONFIG_FSL_PATA_USE_DMA -+static void dma_callback(void *arg, int error_status, unsigned int count) -+{ -+ struct ata_port *ap = arg; -+ struct pata_fsl_priv *priv = ap->host->private_data; -+ u8 *ata_regs = priv->fsl_ata_regs; -+ -+ priv->dma_done = 1; -+ /* -+ * DMA is finished, so unmask INTRQ from the drive to allow the -+ * normal ISR to fire. -+ */ -+#if 0 -+ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); -+#else -+ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); -+#endif -+ mb(); -+} -+ -+static void pata_fsl_bmdma_setup(struct ata_queued_cmd *qc) -+{ -+ int nr_sg = 0; -+ int chan; -+ int dma_mode = 0, dma_ultra; -+ u8 ata_control; -+ struct ata_port *ap = qc->ap; -+ struct pata_fsl_priv *priv = ap->host->private_data; -+ u8 *ata_regs = priv->fsl_ata_regs; -+ struct fsl_ata_platform_data *plat = ap->dev->platform_data; -+ struct scatterlist tmp[plat->max_sg], *tsg, *sg; -+ int err; -+ -+ DPRINTK("ENTER\n"); -+ -+ priv->dma_dir = qc->dma_dir; -+ -+ /* -+ * Configure the on-chip ATA interface hardware. -+ */ -+ dma_ultra = priv->ultra ? -+ FSL_ATA_CTRL_DMA_ULTRA : 0; -+ -+ ata_control = FSL_ATA_CTRL_FIFO_RST_B | -+ FSL_ATA_CTRL_ATA_RST_B | -+ FSL_ATA_CTRL_DMA_PENDING | -+ dma_ultra; -+ -+ if (qc->dma_dir == DMA_TO_DEVICE) { -+ chan = priv->dma_wchan; -+ ata_control |= FSL_ATA_CTRL_FIFO_TX_EN | -+ FSL_ATA_CTRL_DMA_WRITE; -+ dma_mode = DMA_MODE_WRITE; -+ } else { -+ chan = priv->dma_rchan; -+ ata_control |= FSL_ATA_CTRL_FIFO_RCV_EN; -+ dma_mode = DMA_MODE_READ; -+ } -+#if 0 -+ __raw_writel(ata_control, ata_regs + FSL_ATA_CONTROL); -+ __raw_writel(plat->fifo_alarm, ata_regs + FSL_ATA_FIFO_ALARM); -+ __raw_writel(FSL_ATA_INTR_ATA_INTRQ1, ata_regs + FSL_ATA_INT_EN); -+#else -+ WRITE_ATA8(ata_control, FSL_ATA_CONTROL); -+ WRITE_ATA8(plat->fifo_alarm, FSL_ATA_FIFO_ALARM); -+ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ1, FSL_ATA_INT_EN); -+#endif -+ mb(); -+ -+ /* -+ * Set up the DMA completion callback. -+ */ -+ mxc_dma_callback_set(chan, dma_callback, (void *)ap); -+ -+ /* -+ * Copy the sg list to an array. -+ */ -+ tsg = tmp; -+ ata_for_each_sg(sg, qc) { -+ memcpy(tsg, sg, sizeof *sg); -+ tsg++; -+ nr_sg++; -+ } -+ -+ err = mxc_dma_sg_config(chan, tmp, nr_sg, 0, dma_mode); -+ if (err) { -+ printk(KERN_ERR "pata_fsl_bmdma_setup: error %d\n", err); -+ } -+ DPRINTK("EXIT\n"); -+} -+ -+static void pata_fsl_bmdma_start(struct ata_queued_cmd *qc) -+{ -+ struct ata_port *ap = qc->ap; -+ struct pata_fsl_priv *priv = ap->host->private_data; -+ int chan; -+ int err; -+ -+ /* -+ * Start the channel. -+ */ -+ chan = qc->dma_dir == DMA_TO_DEVICE ? priv->dma_wchan : priv->dma_rchan; -+ -+ priv->dma_done = 0; -+ -+ err = mxc_dma_enable(chan); -+ if (err) { -+ printk(KERN_ERR "%s: : error %d\n", __func__, err); -+ } -+ -+ ap->ops->exec_command(ap, &qc->tf); -+} -+ -+static void pata_fsl_bmdma_stop(struct ata_queued_cmd *qc) -+{ -+ struct ata_port *ap = qc->ap; -+ -+ /* do a dummy read as in ata_bmdma_stop */ -+ ata_altstatus(ap); -+} -+ -+static u8 pata_fsl_bmdma_status(struct ata_port *ap) -+{ -+ struct pata_fsl_priv *priv = ap->host->private_data; -+ -+ return priv->dma_done ? ATA_DMA_INTR : 0; -+} -+ -+static void pata_fsl_dma_init(struct ata_port *ap) -+{ -+ struct pata_fsl_priv *priv = ap->host->private_data; -+ -+ priv->dma_rchan = -1; -+ priv->dma_wchan = -1; -+ -+ priv->dma_rchan = mxc_dma_request(MXC_DMA_ATA_RX, "MXC ATA RX"); -+ if (priv->dma_rchan < 0) { -+ dev_printk(KERN_ERR, ap->dev, "couldn't get RX DMA channel\n"); -+ goto err_out; -+ } -+ -+ priv->dma_wchan = mxc_dma_request(MXC_DMA_ATA_TX, "MXC ATA TX"); -+ if (priv->dma_wchan < 0) { -+ dev_printk(KERN_ERR, ap->dev, "couldn't get TX DMA channel\n"); -+ goto err_out; -+ } -+ -+ dev_printk(KERN_ERR, ap->dev, "rchan=%d wchan=%d\n", priv->dma_rchan, -+ priv->dma_wchan); -+ return; -+ -+err_out: -+ ap->mwdma_mask = 0; -+ ap->udma_mask = 0; -+ mxc_dma_free(priv->dma_rchan); -+ mxc_dma_free(priv->dma_wchan); -+ kfree(priv); -+} -+#endif /* CONFIG_FSL_PATA_USE_DMA */ -+ -+static void ata_dummy_noret(struct ata_port *ap) { return; } -+ -+static struct scsi_host_template pata_fsl_sht = { -+ .module = THIS_MODULE, -+ .name = DRV_NAME, -+ .ioctl = ata_scsi_ioctl, -+ .queuecommand = ata_scsi_queuecmd, -+ .can_queue = ATA_DEF_QUEUE, -+ .this_id = ATA_SHT_THIS_ID, -+ .sg_tablesize = LIBATA_MAX_PRD, -+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN, -+ .emulated = ATA_SHT_EMULATED, -+ .use_clustering = ATA_SHT_USE_CLUSTERING, -+ .proc_name = DRV_NAME, -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ .dma_boundary = FSL_ATA_MAX_SG_LEN, -+#endif -+ .slave_configure = ata_scsi_slave_config, -+ .slave_destroy = ata_scsi_slave_destroy, -+ .bios_param = ata_std_bios_param, -+}; -+ -+static struct ata_port_operations pata_fsl_port_ops = { -+ .set_piomode = pata_fsl_set_piomode, -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ .set_dmamode = pata_fsl_set_dmamode, -+#endif -+ -+ .tf_load = ata_tf_load, -+ .tf_read = ata_tf_read, -+ .check_status = ata_check_status, -+ .exec_command = ata_exec_command, -+ .dev_select = ata_std_dev_select, -+ -+ .freeze = ata_bmdma_freeze, -+ .thaw = ata_bmdma_thaw, -+ .error_handler = ata_bmdma_error_handler, -+ .post_internal_cmd = ata_bmdma_post_internal_cmd, -+ .cable_detect = ata_cable_unknown, -+ -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ .bmdma_setup = pata_fsl_bmdma_setup, -+ .bmdma_start = pata_fsl_bmdma_start, -+#endif -+ -+ .qc_prep = ata_noop_qc_prep, -+ .qc_issue = ata_qc_issue_prot, -+ -+ .data_xfer = ata_data_xfer_noirq, -+ -+ .irq_clear = ata_dummy_noret, -+ .irq_on = ata_irq_on, -+ -+ .port_start = pata_fsl_port_start, -+ -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ .bmdma_stop = pata_fsl_bmdma_stop, -+ .bmdma_status = pata_fsl_bmdma_status, -+#endif -+}; -+ -+static void fsl_setup_port(struct ata_ioports *ioaddr) -+{ -+ unsigned int shift = 2; -+ -+ ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift); -+ ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift); -+ ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift); -+ ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift); -+ ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift); -+ ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift); -+ ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift); -+ ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift); -+ ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift); -+ ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift); -+} -+ -+/** -+ * pata_fsl_probe - attach a platform interface -+ * @pdev: platform device -+ * -+ * Register a platform bus integrated ATA host controller -+ * -+ * The 3 platform device resources are used as follows: -+ * -+ * - I/O Base (IORESOURCE_MEM) virt. addr. of ATA controller regs -+ * - CTL Base (IORESOURCE_MEM) unused -+ * - IRQ (IORESOURCE_IRQ) platform IRQ assigned to ATA -+ * -+ */ -+static int __devinit pata_fsl_probe(struct platform_device *pdev) -+{ -+ struct resource *io_res; -+ struct ata_host *host; -+ struct ata_port *ap; -+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) -+ pdev->dev.platform_data; -+ struct pata_fsl_priv *priv; -+ u8 *ata_regs; -+ int ret; -+ -+ DPRINTK("ENTER\n"); -+ /* -+ * Get an ata_host structure for this device -+ */ -+ host = ata_host_alloc(&pdev->dev, 1); -+ if (!host) -+ return -ENOMEM; -+ ap = host->ports[0]; -+ -+ /* -+ * Allocate private data -+ */ -+ priv = kzalloc(sizeof (struct pata_fsl_priv), GFP_KERNEL); -+ if(priv == NULL) { -+ /* free(host); */ -+ return -ENOMEM; -+ } -+ host->private_data = priv; -+ -+ /* -+ * Set up resources -+ */ -+ if (unlikely(pdev->num_resources != 3)) { -+ dev_err(&pdev->dev, "invalid number of resources\n"); -+ return -EINVAL; -+ } -+ -+ io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ ata_regs = (u8 *)io_res->start; -+ priv->fsl_ata_regs = ata_regs; -+ ap->ioaddr.cmd_addr = (void *)(ata_regs + FSL_ATA_DRIVE_DATA); -+ ap->ioaddr.ctl_addr = (void *)(ata_regs + FSL_ATA_DRIVE_CONTROL); -+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; -+ ap->ops = &pata_fsl_port_ops; -+ ap->pio_mask = 0x7F; -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ ap->mwdma_mask = 0x7F; -+ ap->udma_mask = plat->udma_mask; -+ pata_fsl_sht.sg_tablesize = plat->max_sg; -+#else -+ ap->mwdma_mask = 0x00; -+ ap->udma_mask = 0x00; -+#endif -+ fsl_setup_port(&ap->ioaddr); -+ -+ /* -+ * Do platform-specific initialization (e.g. allocate pins, -+ * turn on clock). After this call it is assumed that -+ * plat->get_clk_rate() can be called to calculate -+ * timing. -+ */ -+ if (plat->init && plat->init(pdev)) { -+ /* REVISIT: don't leak what ata_host_alloc() allocated */ -+ return -ENODEV; -+ } -+ -+ /* Deassert the reset bit to enable the interface */ -+ WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL); -+ mb(); -+ -+ /* Set initial timing and mode */ -+ set_ata_bus_timing(XFER_PIO_4, pdev); -+ -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ /* get DMA ready */ -+ pata_fsl_dma_init(ap); -+#endif -+ -+ /* -+ * Enable the ATA INTRQ interrupt from the bus, but -+ * only allow the CPU to see it (INTRQ2) at this point. -+ * INTRQ1, which goes to the DMA, will be enabled later. -+ */ -+#if 0 -+ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); -+#else -+ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); -+#endif -+ mb(); -+ -+ /* activate */ -+ ret = ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt, -+ 0, &pata_fsl_sht); -+ DPRINTK("EXIT ret=%d\n", ret); -+ return ret; -+} -+ -+/** -+ * pata_fsl_remove - unplug a platform interface -+ * @pdev: platform device -+ * -+ * A platform bus ATA device has been unplugged. Perform the needed -+ * cleanup. Also called on module unload for any active devices. -+ */ -+static int __devexit pata_fsl_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct ata_host *host = dev_get_drvdata(dev); -+ struct pata_fsl_priv *priv = host->private_data; -+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) -+ pdev->dev.platform_data; -+ u8 *ata_regs = priv->fsl_ata_regs; -+ -+#if 0 -+ __raw_writel(0, ata_regs + FSL_ATA_INT_EN); /* Disable interrupts */ -+#else -+ WRITE_ATA8(0, FSL_ATA_INT_EN); /* Disable interrupts */ -+#endif -+ mb(); -+ -+ ata_host_detach(host); -+ -+ if (plat->exit) -+ plat->exit(); -+ -+ kfree(priv); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int pata_fsl_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct ata_host *host = dev_get_drvdata(&pdev->dev); -+ struct pata_fsl_priv *priv = host->private_data; -+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) -+ pdev->dev.platform_data; -+ u8 *ata_regs = priv->fsl_ata_regs; -+ -+ /* Disable interrupts. */ -+#if 0 -+ __raw_writel(0, ata_regs + FSL_ATA_INT_EN); -+#else -+ WRITE_ATA8(0, FSL_ATA_INT_EN); -+#endif -+ mb(); -+ -+ if (plat->exit) -+ plat->exit(); -+ -+ return 0; -+} -+ -+static int pata_fsl_resume(struct platform_device *pdev) -+{ -+ struct ata_host *host = dev_get_drvdata(&pdev->dev); -+ struct pata_fsl_priv *priv = host->private_data; -+ struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) -+ pdev->dev.platform_data; -+ u8 *ata_regs = priv->fsl_ata_regs; -+ -+ if (plat->init && plat->init(pdev)) { -+ return -ENODEV; -+ } -+ -+ /* Deassert the reset bit to enable the interface */ -+#if 0 -+ __raw_writel(FSL_ATA_CTRL_ATA_RST_B, ata_regs + FSL_ATA_CONTROL); -+#else -+ WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL); -+#endif -+ mb(); -+ -+ /* Set initial timing and mode */ -+ set_ata_bus_timing(XFER_PIO_4, pdev); -+ -+ /* -+ * Enable hardware interrupts. -+ */ -+#if 0 -+ __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); -+#else -+ WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); -+#endif -+ mb(); -+ -+ return 0; -+} -+#endif -+ -+static struct platform_driver pata_fsl_driver = { -+ .probe = pata_fsl_probe, -+ .remove = __devexit_p(pata_fsl_remove), -+#ifdef CONFIG_PM -+ .suspend = pata_fsl_suspend, -+ .resume = pata_fsl_resume, -+#endif -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init pata_fsl_init(void) -+{ -+ int ret; -+ -+ DPRINTK("ENTER\n"); -+ ret = platform_driver_register(&pata_fsl_driver); -+ DPRINTK("EXIT ret=%d\n", ret); -+ return ret; -+} -+ -+static void __exit pata_fsl_exit(void) -+{ -+ platform_driver_unregister(&pata_fsl_driver); -+} -+module_init(pata_fsl_init); -+module_exit(pata_fsl_exit); -+ -+MODULE_AUTHOR("Freescale Semiconductor, Inc."); -+MODULE_DESCRIPTION("low-level driver for Freescale ATA"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_VERSION); ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -60,6 +60,69 @@ config CRYPTO_DEV_GEODE - To compile this driver as a module, choose M here: the module - will be called geode-aes. - -+config CRYPTO_DEV_MCFCAU -+ bool "Support for Freescale Coldfire Cryptographic Acceleration Unit (CAU)" -+ depends on M5445X -+ select CRYPTO_ALGAPI -+ help -+ The cryptographic acceleration unit (CAU) is a ColdFire coprocessor -+ implementing a set of specialized operations in hardware. For example, you can -+ find it on MCF5445X. -+ -+config CRYPTO_DEV_MCFCAU_DES -+ tristate "DES and Triple DES cipher algorithms (MCF5445X)" -+ depends on CRYPTO_DEV_MCFCAU -+ select CRYPTO_ALGAPI -+ select CRYPTO_BLKCIPHER -+ help -+ DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). -+ -+ Say 'Y' here to use the CAU coprocessor for -+ the CryptoAPI DES and 3DES alogrithms. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called mcfcau-des. -+ -+config CRYPTO_DEV_MCFCAU_AES -+ tristate "AES cipher algorithm (MCF5445X)" -+ depends on CRYPTO_DEV_MCFCAU -+ select CRYPTO_ALGAPI -+ select CRYPTO_BLKCIPHER -+ help -+ AES cipher algorithm (FIPS 197). -+ -+ Say 'Y' here to use the CAU coprocessor for -+ the CryptoAPI AES alogrithm. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called mcfcau-aes. -+ -+config CRYPTO_DEV_MCFCAU_MD5 -+ tristate "MD5 digest algorithm (MCF5445X)" -+ depends on CRYPTO_DEV_MCFCAU -+ select CRYPTO_ALGAPI -+ help -+ MD5 message digest algorithm (RFC1321). -+ -+ Say 'Y' here to use the CAU coprocessor for -+ the CryptoAPI MD5 alogrithm. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called mcfcau-md5. -+ -+config CRYPTO_DEV_MCFCAU_SHA1 -+ tristate "SHA1 digest algorithm (MCF5445X)" -+ depends on CRYPTO_DEV_MCFCAU -+ select CRYPTO_ALGAPI -+ help -+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). -+ -+ Say 'Y' here to use the CAU coprocessor for -+ the CryptoAPI SHA1 alogrithm. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called mcfcau-sha1. -+ - config ZCRYPT - tristate "Support for PCI-attached cryptographic adapters" - depends on S390 ---- a/drivers/crypto/Makefile -+++ b/drivers/crypto/Makefile -@@ -2,3 +2,8 @@ obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += - obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o - obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o - obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o -+obj-$(CONFIG_CRYPTO_DEV_MCFCAU) += mcfcau.o -+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_DES) += mcfcau-des.o -+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_AES) += mcfcau-aes.o -+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_MD5) += mcfcau-md5.o -+obj-$(CONFIG_CRYPTO_DEV_MCFCAU_SHA1) += mcfcau-sha1.o ---- /dev/null -+++ b/drivers/crypto/mcfcau-aes.c -@@ -0,0 +1,311 @@ -+ /*************************************************************************** -+ * mcfcau-aes.c - Implementation of AES Cipher Algorithm -+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). -+ * -+ * Author: Andrey Butok -+ * Copyright Freescale Semiconductor Inc. 2007 -+ * -+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software Foundation, -+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.01 17 September 2007 Andrey Butok -+ * Initial Release - developed on 2.6.20 Linux kernel. -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/crypto.h> -+ -+/* -+#undef DEBUG -+#define DEBUG 1 -+*/ -+ -+#include "mcfcau.h" -+ -+#define MCFCAU_AES_MIN_KEY_SIZE (16) -+#define MCFCAU_AES_MAX_KEY_SIZE (32) -+#define MCFCAU_AES_BLOCK_SIZE (16) -+ -+#define MCFCAU_AES_DRIVER_DESC "AES ColdFire CAU driver" -+#define MCFCAU_AES_DRIVER_VERSION "v0.01" -+ -+struct mcfcau_aes_ctx { -+ int Nr_1; -+ u32 buf[120]; -+ u32 buf_tmp[16]; -+}; -+ -+static u32 mcfcau_rco_tab[10]={ 0x01000000, 0x02000000, 0x04000000, 0x08000000, -+ 0x10000000, 0x20000000, 0x40000000, 0x80000000, -+ 0x1b000000, 0x36000000}; -+ -+int mcfcau_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key, -+ unsigned int key_len) -+{ -+ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm); -+ const u32 * key = (const u32 *)in_key; -+ u32 *flags = &tfm->crt_flags; -+ u32 i; -+ u32* key_sch = (&ctx->buf[0]); -+ u32 * temp_p, * rcon_p; -+ u32 Nx; -+ u32 Nk; -+ unsigned long iflags; -+ -+ DBG("\n"); -+ -+ if (key_len % 8) { -+ *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; -+ return -EINVAL; -+ } -+ -+ Nk = key_len>>2; -+ -+ for(i=0;i<Nk;i++){ -+ key_sch[i] = key[i]; -+ } -+ -+ ctx->Nr_1 = Nk+5; -+ -+ /* Key Expansion */ -+ temp_p=&key_sch[Nk-1]; -+ rcon_p=&mcfcau_rco_tab[0]; -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ -+ asm volatile ("move.l %0, %%a1"::"m"(temp_p):"a1"); -+ asm volatile ("move.l %0, %%a3"::"m"(rcon_p):"a3"); -+ asm volatile ("move.l %0, %%a4"::"m"(key_sch):"a4"); -+ -+ Nx=(Nk+7)<<2; /* (Nr+1)*Nb */ -+ -+ for(i=Nk; i<Nx; i++) -+ { -+ /* temp = key_sch[Nk-1] */ -+ asm volatile ("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CAA):"a1"); -+ -+ if(i%Nk==0){ -+ asm volatile ("moveq #8, %%d0":::"d0"); -+ /* CAA=RotWord(temp) */ -+ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA):"d0"); -+ /* SubWord(CAA) */ -+ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_AESS+MCFCAU_CAA)); -+ /* ACC xor rcon[i/Nk] */ -+ asm volatile ("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CAA):"a3"); -+ -+ }else if((Nk>6) && (i%Nk ==4)){ -+ /* SubWord(ACC) */ -+ asm volatile ("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_AESS+MCFCAU_CAA)); -+ } -+ -+ /* key_sch[i]^=key_sch[i-Nk]; store ACC to key_sch[i] */ -+ asm volatile ("cp0ld.l (%%a4)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CAA):"a4"); -+ asm volatile ("cp0st.l %%d0,(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CAA)); -+ } -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+ -+ return 0; -+} -+ -+ -+/* encrypt a block of text */ -+static void mcfcau_aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) -+{ -+ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm); -+ const int Nr_1 = ctx->Nr_1; -+ -+ u32* key_sch = &(ctx->buf[0]); -+ u32 i; -+ unsigned long iflags; -+ -+ DBG("\n"); -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ asm("move.l %0, %%a1"::"m"(in):"a1"); -+ asm("move.l %0, %%a0"::"m"(key_sch):"a0"); -+ /* state=in */ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1"); -+ /* AddRoundKey() */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0"); -+ -+ for(i=Nr_1;i>0;i--){ -+ /* SubBytes(state) */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA0)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA3)); -+ /* ShiftRows(state) */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESR)); -+ /* MixColumns(state); AddRoundKey() */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_AESC+MCFCAU_CA0):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_AESC+MCFCAU_CA1):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_AESC+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_AESC+MCFCAU_CA3):"a0"); -+ } -+ /* SubBytes(state)*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA0)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESS+MCFCAU_CA3)); -+ /* ShiftRows(state) */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESR)); -+ /* AddRoundKey() */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0"); -+ /* out = state */ -+ asm("move.l %0, %%a1" ::"m"(out):"a1"); -+ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA0):"d0"); -+ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA1):"d1"); -+ -+ asm("move.l %%d0,(%%a1)+":::"a1"); -+ asm("move.l %%d1,(%%a1)+":::"a1"); -+ -+ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); -+ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); -+ -+ asm("move.l %%d0,(%%a1)+":::"a1"); -+ asm("move.l %%d1,(%%a1)+":::"a1"); -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+} -+ -+ -+/* decrypt a block of text */ -+static void mcfcau_aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) -+{ -+ struct mcfcau_aes_ctx *ctx = crypto_tfm_ctx(tfm); -+ u32* key_sch = &(ctx->buf[0]); -+ u32 i; -+ unsigned long iflags; -+ const int Nr_1 = ctx->Nr_1; -+ key_sch=&key_sch[(Nr_1+2)*4]; -+ -+ DBG("\n"); -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ -+ asm("move.l %0, %%a1"::"m"(in):"a1"); -+ asm("move.l %0, %%a0"::"m"(key_sch):"a0"); -+ /* state=in */ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1"); -+ /* AddRoundKey() */ -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0"); -+ -+ for(i=Nr_1;i>0;i--){ -+ /* InvShiftRows(state) */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIR)); -+ /* InvSubBytes(state) */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA3)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA0)); -+ /* InvMixColumns(state); AddRoundKey() */ -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_AESIC+MCFCAU_CA3):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_AESIC+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_AESIC+MCFCAU_CA1):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_AESIC+MCFCAU_CA0):"a0"); -+ } -+ /* InvShiftRows(state) */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIR)); -+ /* InvSubBytes(state)*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA3)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_AESIS+MCFCAU_CA0)); -+ /* AddRoundKey() */ -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA3):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA1):"a0"); -+ asm("cp0ld.l -(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0):"a0"); -+ /* out = state */ -+ asm("move.l %0, %%a1" ::"m"(out):"a1"); -+ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA0):"d0"); -+ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA1):"d1"); -+ -+ asm("move.l %%d0,(%%a1)+":::"a1"); -+ asm("move.l %%d1,(%%a1)+":::"a1"); -+ -+ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); -+ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); -+ -+ asm("move.l %%d0,(%%a1)+":::"a1"); -+ asm("move.l %%d1,(%%a1)+":::"a1"); -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+ -+} -+ -+ -+static struct crypto_alg mcfcau_aes_alg = { -+ .cra_name = "aes", -+ .cra_driver_name = "aes-mcfcau", -+ .cra_priority = MCFCAU_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER, -+ .cra_blocksize = MCFCAU_AES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct mcfcau_aes_ctx), -+ .cra_alignmask = 3, -+ .cra_module = THIS_MODULE, -+ .cra_list = LIST_HEAD_INIT(mcfcau_aes_alg.cra_list), -+ .cra_u = { -+ .cipher = { -+ .cia_min_keysize = MCFCAU_AES_MIN_KEY_SIZE, -+ .cia_max_keysize = MCFCAU_AES_MAX_KEY_SIZE, -+ .cia_setkey = mcfcau_aes_setkey, -+ .cia_encrypt = mcfcau_aes_encrypt, -+ .cia_decrypt = mcfcau_aes_decrypt -+ } -+ } -+}; -+ -+static int __init mcfcau_aes_init(void) -+{ -+ int ret = crypto_register_alg(&mcfcau_aes_alg); -+ -+ printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " " -+ MCFCAU_AES_DRIVER_VERSION " %s.\n",ret?"failed":"registered"); -+ return ret; -+} -+ -+static void __exit mcfcau_aes_fini(void) -+{ -+ crypto_unregister_alg(&mcfcau_aes_alg); -+ printk(KERN_INFO MCFCAU_AES_DRIVER_DESC " " -+ MCFCAU_AES_DRIVER_VERSION " unregistered.\n"); -+} -+ -+module_init(mcfcau_aes_init); -+module_exit(mcfcau_aes_fini); -+ -+MODULE_DESCRIPTION(MCFCAU_AES_DRIVER_DESC); -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_AUTHOR("Andrey Butok"); ---- /dev/null -+++ b/drivers/crypto/mcfcau.c -@@ -0,0 +1,32 @@ -+/*************************************************************************** -+ * mcfcau.c - Implementation of DES & Triple DES EDE Cipher Algorithms -+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). -+ * -+ * Author: Andrey Butok -+ * Copyright Freescale Semiconductor Inc. 2007 -+ * -+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software Foundation, -+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.01 28 September 2006 Andrey Butok -+ * Initial Release - developed on 2.6.20 Linux kernel. -+ */ -+#include <linux/module.h> -+ -+DEFINE_SPINLOCK(mcfcau_lock); -+EXPORT_SYMBOL(mcfcau_lock); ---- /dev/null -+++ b/drivers/crypto/mcfcau-des.c -@@ -0,0 +1,437 @@ -+/*************************************************************************** -+ * mcfcau-des.c - Implementation of DES & Triple DES EDE Cipher Algorithms -+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). -+ * -+ * Author: Andrey Butok -+ * Copyright Freescale Semiconductor Inc. 2007 -+ * -+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software Foundation, -+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.01 14 August 2007 Andrey Butok -+ * Initial Release - developed on 2.6.20 Linux kernel. -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/crypto.h> -+#include <linux/types.h> -+ -+/* -+#undef DEBUG -+#define DEBUG 1 -+*/ -+ -+#include "mcfcau.h" -+ -+#define MCFCAU_DES_KEY_SIZE (8) -+#define MCFCAU_DES_EXPKEY_WORDS (32) -+#define MCFCAU_DES_BLOCK_SIZE (8) -+ -+#define MCFCAU_DES3_EDE_KEY_SIZE (3 * MCFCAU_DES_KEY_SIZE) -+#define MCFCAU_DES3_EDE_EXPKEY_WORDS (3 * MCFCAU_DES_EXPKEY_WORDS) -+#define MCFCAU_DES3_EDE_BLOCK_SIZE (MCFCAU_DES_BLOCK_SIZE) -+ -+#define MCFCAU_DES_DRIVER_DESC "DES & 3DES ColdFire CAU driver" -+#define MCFCAU_DES_DRIVER_VERSION "v0.01" -+ -+struct mcfcau_des_ctx { -+ u32 expkey[MCFCAU_DES_EXPKEY_WORDS]; -+}; -+ -+struct mcfcau_des3_ede_ctx { -+ u32 expkey[MCFCAU_DES3_EDE_EXPKEY_WORDS]; -+}; -+ -+/* DES round operations */ -+static inline void mcfcau_des_encipher(void) -+{ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESK)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSL1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSL1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1)); -+} -+ -+static inline void mcfcau_des_decipher(void) -+{ -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESK+MCFCAU_DC)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_IP+MCFCAU_KSR1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR2)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_KSR1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0"::"n"(MCFCAU_DESR+MCFCAU_FP+MCFCAU_KSL1)); -+} -+ -+ -+static int mcfcau_des_setkey(struct crypto_tfm *tfm, const u8 *key_p, -+ unsigned int keylen) -+{ -+ struct mcfcau_des_ctx *dctx = crypto_tfm_ctx(tfm); -+ u32 *flags = &tfm->crt_flags; -+ u32 * key = (u32 *) key_p; -+ -+ DBG("\n"); -+ -+ /* -+ * RFC2451: Weak key checks SHOULD be performed. -+ * -+ * FIPS 74: -+ * Keys having duals are keys which produce all zeros, all ones, or -+ * alternating zero-one patterns in the C and D registers after Permuted -+ * Choice 1 has operated on the key. -+ * -+ */ -+ if(*flags & CRYPTO_TFM_REQ_WEAK_KEY){ /* FIPS 74 */ -+ if(key[0]<0xE001E00l){ -+ if(key[0]<0x1FE01FE0){ -+ if(key[0]<0x01E001E0){ -+ if(((key[0]==0x01010101)&&(key[1]==0x01010101))|| -+ ((key[0]==0x011F011F)&&(key[1]==0x010E010E)) ) -+ goto WEAK_KEY; -+ } -+ else{ -+ if(((key[0]==0x01E001E0)&&(key[1]==0x01F101F1))|| -+ ((key[0]==0x01FE01FE)&&(key[1]==0x01FE01FE)) ) -+ goto WEAK_KEY; -+ } -+ } -+ else{ -+ if(key[0]<0x1F1F1F1F){ -+ if(((key[0]==0x1FE01FE0)&&(key[1]==0x0EF10EF1))|| -+ ((key[0]==0x1F011F0l)&&(key[1]==0x0E010E01)) ) -+ goto WEAK_KEY; -+ } -+ else{ -+ if(((key[0]==0x1F1F1F1F)&&(key[1]==0x0E0E0E0E))|| -+ ((key[0]==0x1FFE1FFE)&&(key[1]==0x0EFE0EFE)) ) -+ goto WEAK_KEY; -+ } -+ } -+ } else { -+ if(key[0]<0xFE01FE01){ -+ if(key[0]<0xE0E0E0E0){ -+ if(((key[0]==0xE001E00l)&&(key[1]==0xF101F101))|| -+ ((key[0]==0xE01FE01F)&&(key[1]==0xF10EF10E)) ) -+ goto WEAK_KEY; -+ } -+ else{ -+ if(((key[0]==0xE0E0E0E0)&&(key[1]==0xF1F1F1F1))|| -+ ((key[0]==0xE0FEE0FE)&&(key[1]==0xF1FEF1FE)) ) -+ goto WEAK_KEY; -+ } -+ } -+ else{ -+ if(key[0]<0xFEE0FEE0){ -+ if(((key[0]==0xFE01FE01)&&(key[1]==0xFE01FE01))|| -+ ((key[0]==0xFE1FFE1F)&&(key[1]==0xFE0EFE0E)) ) -+ goto WEAK_KEY; -+ } -+ else{ -+ if(((key[0]==0xFEE0FEE0)&&(key[1]==0xFEF1FEF1))|| -+ ((key[0]==0xFEFEFEFE)&&(key[1]==0xFEFEFEFE)) ) -+ goto WEAK_KEY; -+ } -+ } -+ } -+ } -+ memcpy(dctx->expkey, key_p, keylen); -+ return 0; -+WEAK_KEY: -+ *flags |= CRYPTO_TFM_RES_WEAK_KEY; -+ return -EINVAL; -+} -+ -+ -+void mcfcau_des_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -+{ -+ struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm); -+ u32 * des_key_tmp = ctx->expkey; -+ unsigned long iflags; -+ -+ DBG("\n"); -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ -+ asm("move.l %0, %%a0"::"m"(src):"a0"); -+ asm("move.l %0, %%a1"::"m"(des_key_tmp):"a1"); -+ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3)); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); -+ -+ mcfcau_des_encipher(); -+ -+ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); -+ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); -+ asm("move.l %0, %%a1" ::"m"(dst):"a1"); -+ asm("move.l %d0,(%a1)+"); -+ asm("move.l %d1,(%a1)"); -+ -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+} -+ -+ -+void mcfcau_des_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -+{ -+ struct mcfcau_des_ctx *ctx = crypto_tfm_ctx(tfm); -+ u32 * des_key_tmp = ctx->expkey; -+ unsigned long iflags; -+ -+ DBG("\n"); -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ -+ asm("move.l %0, %%a0"::"m"(src):"a0"); -+ asm("move.l %0, %%a1"::"m"(des_key_tmp):"a1"); -+ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3)); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); -+ -+ mcfcau_des_decipher(); -+ -+ asm("move.l %0, %%a1" ::"m"(dst):"a1"); -+ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); -+ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); -+ asm("move.l %d0,(%a1)+"); -+ asm("move.l %d1,(%a1)"); -+ -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+} -+ -+ -+/* -+ * RFC2451: -+ * -+ * For DES-EDE3, there is no known need to reject weak or -+ * complementation keys. Any weakness is obviated by the use of -+ * multiple keys. -+ * -+ * However, if the first two or last two independent 64-bit keys are -+ * equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the -+ * same as DES. Implementers MUST reject keys that exhibit this -+ * property. -+ * -+ */ -+ -+static int mcfcau_des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key_p, unsigned int keylen) -+{ -+ const u32 *key = (const u32 *)key_p; -+ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm); -+ u32 *flags = &tfm->crt_flags; -+ -+DBG("\n"); -+ -+ if (unlikely(!((key[0] ^ key[2]) | (key[1] ^ key[3])) || -+ !((key[2] ^ key[4]) | (key[3] ^ key[5])))) -+ { -+ *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED; -+ return -EINVAL; -+ } -+ -+ memcpy(dctx->expkey,key_p,keylen); -+ -+ return 0; -+} -+ -+static void mcfcau_des3_ede_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -+{ -+ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm); -+ const u32 * des_key_tmp = dctx->expkey; -+ unsigned long iflags; -+ -+ DBG("\n"); -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ -+ /*EK1*/ -+ asm("move.l %0, %%a0"::"m"(src):"a0"); -+ asm("move.l %0, %%a1"::"m"(des_key_tmp):"a1"); -+ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3)); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1"); -+ -+ mcfcau_des_encipher(); -+ -+ /*DK2*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1"); -+ -+ mcfcau_des_decipher(); -+ -+ /*EK3*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); -+ -+ mcfcau_des_encipher(); -+ -+ asm("move.l %0, %%a1" ::"m"(dst):"a1"); -+ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); -+ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); -+ asm("move.l %d0,(%a1)+"); -+ asm("move.l %d1,(%a1)"); -+ -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+} -+ -+static void mcfcau_des3_ede_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -+{ -+ struct mcfcau_des3_ede_ctx *dctx = crypto_tfm_ctx(tfm); -+ const u32 * des_key_tmp = dctx->expkey + 6 - 2; -+ unsigned long iflags; -+ -+ DBG("\n"); -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ -+ /*DK3*/ -+ asm("move.l %0, %%a0"::"m"(src):"a0"); -+ asm("move.l %0, %%a1"::"m"(des_key_tmp):"a1"); -+ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3)); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); -+ -+ mcfcau_des_decipher(); -+ -+ /*EK2*/ -+ asm("suba.l #12,%a1"); /*dec key pointer*/ -+ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); -+ -+ mcfcau_des_encipher(); -+ -+ /*DK1*/ -+ asm("suba.l #12,%a1"); /*dec key pointer*/ -+ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a1"); -+ asm("cp0ld.l (%%a1),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1)); -+ -+ mcfcau_des_decipher(); -+ -+ asm("move.l %0, %%a1" ::"m"(dst):"a1"); -+ asm("cp0st.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"d0"); -+ asm("cp0st.l %%d0,%%d1,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"d1"); -+ asm("move.l %d0,(%a1)+"); -+ asm("move.l %d1,(%a1)"); -+ -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+} -+ -+ -+static struct crypto_alg mcfcau_des_alg = { -+ .cra_name = "des", -+ .cra_driver_name = "des-mcfcau", -+ .cra_priority = MCFCAU_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER, -+ .cra_blocksize = MCFCAU_DES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct mcfcau_des_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_list = LIST_HEAD_INIT(mcfcau_des_alg.cra_list), -+ .cra_u = { .cipher = { -+ .cia_min_keysize = MCFCAU_DES_KEY_SIZE, -+ .cia_max_keysize = MCFCAU_DES_KEY_SIZE, -+ .cia_setkey = mcfcau_des_setkey, -+ .cia_encrypt = mcfcau_des_encrypt, -+ .cia_decrypt = mcfcau_des_decrypt } } -+}; -+ -+static struct crypto_alg mcfcau_des3_ede_alg = { -+ .cra_name = "des3_ede", -+ .cra_driver_name = "des3_ede-mcfcau", -+ .cra_priority = MCFCAU_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER, -+ .cra_blocksize = MCFCAU_DES3_EDE_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct mcfcau_des3_ede_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_list = LIST_HEAD_INIT(mcfcau_des3_ede_alg.cra_list), -+ .cra_u = { .cipher = { -+ .cia_min_keysize = MCFCAU_DES3_EDE_KEY_SIZE, -+ .cia_max_keysize = MCFCAU_DES3_EDE_KEY_SIZE, -+ .cia_setkey = mcfcau_des3_ede_setkey, -+ .cia_encrypt = mcfcau_des3_ede_encrypt, -+ .cia_decrypt = mcfcau_des3_ede_decrypt } } -+}; -+ -+MODULE_ALIAS("mcfcau_des3_ede"); -+ -+static int __init mcfcau_des_init(void) -+{ -+ int ret; -+ -+ ret = crypto_register_alg(&mcfcau_des_alg); -+ if (ret < 0) -+ goto out; -+ -+ ret = crypto_register_alg(&mcfcau_des3_ede_alg); -+ if (ret < 0) -+ crypto_unregister_alg(&mcfcau_des_alg); -+out: -+ printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " " -+ MCFCAU_DES_DRIVER_VERSION " %s.\n",ret?"failed":"registered"); -+ return ret; -+} -+ -+static void __exit mcfcau_des_exit(void) -+{ -+ crypto_unregister_alg(&mcfcau_des3_ede_alg); -+ crypto_unregister_alg(&mcfcau_des_alg); -+ -+ printk(KERN_INFO MCFCAU_DES_DRIVER_DESC " " -+ MCFCAU_DES_DRIVER_VERSION " unregistered.\n"); -+} -+ -+module_init(mcfcau_des_init); -+module_exit(mcfcau_des_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms for ColdFire CAU"); -+MODULE_AUTHOR("Andrey Butok"); ---- /dev/null -+++ b/drivers/crypto/mcfcau.h -@@ -0,0 +1,98 @@ -+/*************************************************************************** -+ * mcfcau.h - Common header file for Freescale ColdFire -+ * Cryptographic Acceleration Unit (CAU) drivers. -+ * -+ * Author: Andrey Butok -+ * Copyright Freescale Semiconductor Inc. 2007 -+ * -+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software Foundation, -+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.01 14 August 2007 Andrey Butok -+ */ -+ -+#ifndef MCFCAU_H -+#define MCFCAU_H -+ -+#include <linux/spinlock.h> -+ -+/* CAU Registers (CAx) */ -+#define MCFCAU_CASR (0x0) -+#define MCFCAU_CAA (0x1) -+#define MCFCAU_CA0 (0x2) -+#define MCFCAU_CA1 (0x3) -+#define MCFCAU_CA2 (0x4) -+#define MCFCAU_CA3 (0x5) -+#define MCFCAU_CA4 (0x6) -+#define MCFCAU_CA5 (0x7) -+ -+ /* CAU Commands */ -+#define MCFCAU_CNOP (0x000) -+#define MCFCAU_LDR (0x010) -+#define MCFCAU_STR (0x020) -+#define MCFCAU_ADR (0x030) -+#define MCFCAU_RADR (0x040) -+#define MCFCAU_ADRA (0x050) -+#define MCFCAU_XOR (0x060) -+#define MCFCAU_ROTL (0x070) -+#define MCFCAU_MVRA (0x080) -+#define MCFCAU_MVAR (0x090) -+#define MCFCAU_AESS (0x0A0) -+#define MCFCAU_AESIS (0x0B0) -+#define MCFCAU_AESC (0x0C0) -+#define MCFCAU_AESIC (0x0D0) -+#define MCFCAU_AESR (0x0E0) -+#define MCFCAU_AESIR (0x0F0) -+#define MCFCAU_DESR (0x100) -+#define MCFCAU_DESK (0x110) -+#define MCFCAU_HASH (0x120) -+#define MCFCAU_SHS (0x130) -+#define MCFCAU_MDS (0x140) -+#define MCFCAU_ILL (0x1F0) -+ -+/* DESR Fields */ -+#define MCFCAU_IP (0x08) /* initial permutation */ -+#define MCFCAU_FP (0x04) /* final permutation */ -+#define MCFCAU_KSL1 (0x00) /* key schedule left 1 bit */ -+#define MCFCAU_KSL2 (0x01) /* key schedule left 2 bits */ -+#define MCFCAU_KSR1 (0x02) /* key schedule right 1 bit */ -+#define MCFCAU_KSR2 (0x03) /* key schedule right 2 bits */ -+ -+/* DESK Field */ -+#define MCFCAU_DC (0x01) /* decrypt key schedule */ -+#define MCFCAU_CP (0x02) /* check parity */ -+ -+/* HASH Functions Codes */ -+#define MCFCAU_HFF (0x0) /* MD5 F() CA1&CA2 | ~CA1&CA3 */ -+#define MCFCAU_HFG (0x1) /* MD5 G() CA1&CA3 | CA2&~CA3 */ -+#define MCFCAU_HFH (0x2) /* MD5 H(), SHA Parity() CA1^CA2^CA3 */ -+#define MCFCAU_HFI (0x3) /* MD5 I() CA2^(CA1|~CA3) */ -+#define MCFCAU_HFC (0x4) /* SHA Ch() CA1&CA2 ^ ~CA1&CA3 */ -+#define MCFCAU_HFM (0x5) /* SHA Maj() CA1&CA2 ^ CA1&CA3 ^ CA2&CA3 */ -+ -+#define MCFCAU_CRA_PRIORITY (300) -+ -+extern spinlock_t mcfcau_lock; -+ -+#ifdef DEBUG -+#define DBG(fmt, args...) printk( "[%s] " fmt , __FUNCTION__, ## args) -+#else -+#define DBG(fmt, args...) do{}while(0) -+#endif -+ -+#endif ---- /dev/null -+++ b/drivers/crypto/mcfcau-md5.c -@@ -0,0 +1,654 @@ -+ /*************************************************************************** -+ * mcfcau-md5.c - Implementation of MD5 Message Digest Algorithm (RFC1321) -+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). -+ * -+ * Author: Andrey Butok -+ * Copyright Freescale Semiconductor Inc. 2007 -+ * -+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software Foundation, -+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.01 30 September 2007 Andrey Butok -+ * Initial Release - developed on 2.6.20 Linux kernel. -+ */ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/string.h> -+#include <linux/crypto.h> -+#include <linux/types.h> -+#include <asm/byteorder.h> -+ -+/* -+#undef DEBUG -+#define DEBUG 1 -+*/ -+ -+#include "mcfcau.h" -+ -+ -+#define MCFCAU_MD5_DIGEST_SIZE (16) -+#define MCFCAU_MD5_HMAC_BLOCK_SIZE (64) -+#define MCFCAU_MD5_BLOCK_WORDS (16) -+#define MCFCAU_MD5_HASH_WORDS (4) -+ -+#define MCFCAU_MD5_DRIVER_DESC "MD5 ColdFire CAU driver" -+#define MCFCAU_MD5_DRIVER_VERSION "v0.01" -+ -+ -+struct mcfcau_md5_ctx { -+ u32 hash[MCFCAU_MD5_HASH_WORDS]; -+ u32 block[MCFCAU_MD5_BLOCK_WORDS]; -+ u64 byte_count; -+}; -+ -+u32 mcfcau_md5_t[64]={0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee, -+ 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501, -+ 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be, -+ 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821, -+ 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa, -+ 0xd62f105d, 0x02441453, 0xd8a1e681, 0xe7d3fbc8, -+ 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed, -+ 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a, -+ 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c, -+ 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70, -+ 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x04881d05, -+ 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665, -+ 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039, -+ 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1, -+ 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1, -+ 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391}; -+ -+ -+ -+static void mcfcau_md5_transform(u32 *hash, u32 const *in) -+{ -+ int i; -+ u32 * md5_t_p=&mcfcau_md5_t[0]; -+ unsigned long iflags; -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ asm("move.l %0, %%a1"::"m"(hash):"a1"); -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CAA):"a1");/*a*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a1");/*b*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a1");/*c*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3):"a1");/*d*/ -+ asm("move.l %0, %%a0"::"m"(in):"a0"); /* X[] */ -+ asm("move.l %0, %%a3"::"m"(md5_t_p):"a3"); /* T[] */ -+ -+ -+ /* Round 1 */ -+ asm("moveq.l #7, %%d4":::"d4"); /* for rotating by 7 */ -+ asm("moveq.l #12, %%d5":::"d5"); /* for rotating by 12 */ -+ asm("moveq.l #17, %%d6":::"d6"); /* for rotating by 17 */ -+ asm("moveq.l #22, %%d7":::"d7"); /* for rotating by 22 */ -+ -+ for(i=0; i<4;i++){ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFF)); /* a+F(b,c,d) */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); /* add byterev x[i] */ -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); /* add t[i] */ -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); /* rotate by 7 */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); /* add b */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); /* register to register shift */ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFF)); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFF)); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFF)); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ }; -+ -+ -+ /* Round 2 */ -+ asm("moveq.l #5, %%d4":::"d4"); /* for rotating by 5 */ -+ asm("moveq.l #9, %%d5":::"d5"); /* for rotating by 9 */ -+ asm("moveq.l #14, %%d6":::"d6"); /* for rotating by 14 */ -+ asm("moveq.l #20, %%d7":::"d7"); /* for rotating by 20 */ -+ -+ asm("lea -60(%%a0),%%a0":::"a0"); -+ -+ for(i=0; i<2;i++){ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 20(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 20(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -44(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 20(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ }; -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 20(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -44(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 20(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 20(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -44(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 20(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 20(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFG)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ /* Round 3 */ -+ asm("moveq.l #4, %%d4":::"d4"); /* for rotating by 5 */ -+ asm("moveq.l #11, %%d5":::"d5"); /* for rotating by 9 */ -+ asm("moveq.l #16, %%d6":::"d6"); /* for rotating by 14 */ -+ asm("moveq.l #23, %%d7":::"d7"); /* for rotating by 20 */ -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -52(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -52(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 12(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -52(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -8(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ /* Round 4 */ -+ asm("moveq.l #6, %%d4":::"d4"); /* for rotating by 6 */ -+ asm("moveq.l #10, %%d5":::"d5"); /* for rotating by 10 */ -+ asm("moveq.l #15, %%d6":::"d6"); /* for rotating by 15 */ -+ asm("moveq.l #21, %%d7":::"d7"); /* for rotating by 21 */ -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -36(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -36(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -36(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -36(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -36(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d4,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea -36(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d5,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d6,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFI)); -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_RADR+MCFCAU_CAA):"a0"); -+ asm("lea 28(%%a0),%%a0" :::"a0"); -+ asm("cp0ld.l (%%a3)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a3"); -+ asm("cp0ld.l %%d7,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA1)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MDS)); -+ -+ -+ asm("move.l %0, %%a1"::"m"(hash):"a1"); -+ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1");/*a*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA1):"a1");/*b*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA2):"a1");/*c*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA3):"a1");/*d*/ -+ -+ asm("cp0st.l %%d0,-(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"a1");/*d*/ -+ asm("cp0st.l %%d0,-(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"a1");/*c*/ -+ asm("cp0st.l %%d0,-(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA1):"a1");/*b*/ -+ asm("cp0st.l %%d0,-(%%a1),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CAA):"a1");/*a*/ -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+} -+ -+static inline void le32_to_cpu_array(u32 *buf, unsigned int words) -+{ -+ while (words--) { -+ __le32_to_cpus(buf); -+ buf++; -+ } -+} -+ -+static inline void cpu_to_le32_array(u32 *buf, unsigned int words) -+{ -+ while (words--) { -+ __cpu_to_le32s(buf); -+ buf++; -+ } -+} -+ -+static void mcfcau_md5_initialization(struct crypto_tfm *tfm) -+{ -+ struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm); -+ -+ DBG("\n"); -+ mctx->hash[0] = 0x67452301; -+ mctx->hash[1] = 0xefcdab89; -+ mctx->hash[2] = 0x98badcfe; -+ mctx->hash[3] = 0x10325476; -+ mctx->byte_count = 0; -+} -+ -+static void mcfcau_md5_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len) -+{ -+ struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm); -+ const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f); -+ -+ DBG("\n"); -+ mctx->byte_count += len; -+ -+ if (avail > len) { -+ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), -+ data, len); -+ } -+ else { -+ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), data, avail); -+ -+ mcfcau_md5_transform(mctx->hash, mctx->block); -+ data += avail; -+ len -= avail; -+ -+ while (len >= sizeof(mctx->block)) { -+ memcpy(mctx->block, data, sizeof(mctx->block)); -+ mcfcau_md5_transform(mctx->hash, mctx->block); -+ data += sizeof(mctx->block); -+ len -= sizeof(mctx->block); -+ } -+ -+ memcpy(mctx->block, data, len); -+ } -+} -+ -+static void mcfcau_md5_final(struct crypto_tfm *tfm, u8 *out) -+{ -+ struct mcfcau_md5_ctx *mctx = crypto_tfm_ctx(tfm); -+ const unsigned int offset = mctx->byte_count & 0x3f; -+ char *p = (char *)mctx->block + offset; -+ int padding = 56 - (offset + 1); -+ -+ DBG("\n"); -+ -+ *p++ = 0x80; -+ if (padding < 0) { -+ memset(p, 0x00, padding + sizeof (u64)); -+ mcfcau_md5_transform(mctx->hash, mctx->block); -+ p = (char *)mctx->block; -+ padding = 56; -+ } -+ -+ memset(p, 0, padding); -+ mctx->block[14] = mctx->byte_count << 3; -+ mctx->block[15] = mctx->byte_count >> 29; -+ le32_to_cpu_array(&mctx->block[14], 2); -+ -+ mcfcau_md5_transform(mctx->hash, mctx->block); -+ -+ cpu_to_le32_array(mctx->hash, sizeof(mctx->hash) / sizeof(u32)); -+ memcpy(out, mctx->hash, sizeof(mctx->hash)); -+ memset(mctx, 0, sizeof(*mctx)); -+} -+ -+static struct crypto_alg mcfcau_md5_alg = { -+ .cra_name = "md5", -+ .cra_driver_name = "md5-mcfcau", -+ .cra_priority = MCFCAU_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_TYPE_DIGEST, -+ .cra_blocksize = MCFCAU_MD5_HMAC_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct mcfcau_md5_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_list = LIST_HEAD_INIT(mcfcau_md5_alg.cra_list), -+ .cra_u = { .digest = { -+ .dia_digestsize = MCFCAU_MD5_DIGEST_SIZE, -+ .dia_init = mcfcau_md5_initialization, -+ .dia_update = mcfcau_md5_update, -+ .dia_final = mcfcau_md5_final } } -+}; -+ -+static int __init mcfcau_md5_init(void) -+{ -+ int ret = crypto_register_alg(&mcfcau_md5_alg); -+ printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " " -+ MCFCAU_MD5_DRIVER_VERSION " %s.\n",ret?"failed":"registered"); -+ return ret; -+} -+ -+static void __exit mcfcau_md5_exit(void) -+{ -+ crypto_unregister_alg(&mcfcau_md5_alg); -+ printk(KERN_INFO MCFCAU_MD5_DRIVER_DESC " " -+ MCFCAU_MD5_DRIVER_VERSION " unregistered.\n"); -+} -+ -+module_init(mcfcau_md5_init); -+module_exit(mcfcau_md5_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION(MCFCAU_MD5_DRIVER_DESC); -+MODULE_AUTHOR("Andrey Butok"); ---- /dev/null -+++ b/drivers/crypto/mcfcau-sha1.c -@@ -0,0 +1,280 @@ -+ /*************************************************************************** -+ * mcfcau-sha1.c - Implementation of SHA1 Secure Hash Algorithm -+ * for Freescale ColdFire Cryptographic Acceleration Unit (CAU). -+ * -+ * Author: Andrey Butok -+ * Copyright Freescale Semiconductor Inc. 2007 -+ * -+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software Foundation, -+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.01 15 October 2007 Andrey Butok -+ * Initial Release - developed on 2.6.20 Linux kernel. -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/mm.h> -+#include <linux/crypto.h> -+#include <linux/types.h> -+ -+ -+/* -+#undef DEBUG -+#define DEBUG 1 -+*/ -+ -+#include "mcfcau.h" -+ -+#define MCFCAU_SHA1_DIGEST_WORDS (5) -+#define MCFCAU_SHA1_WORKSPACE_WORDS (80) -+ -+#define MCFCAU_SHA1_DIGEST_SIZE (20) -+#define MCFCAU_SHA1_HMAC_BLOCK_SIZE (64) -+ -+#define MCFCAU_SHA1_DRIVER_DESC "SHA1 ColdFire CAU driver" -+#define MCFCAU_SHA1_DRIVER_VERSION "v0.01" -+ -+struct mcfcau_sha1_ctx { -+ u64 count; -+ u32 state[5]; -+ u8 buffer[64]; -+}; -+ -+const static u32 K[4]={0x5A827999L, /* Rounds 0-19: sqrt(2) * 2^30 */ -+ 0x6ED9EBA1L, /* Rounds 20-39: sqrt(3) * 2^30 */ -+ 0x8F1BBCDCL, /* Rounds 40-59: sqrt(5) * 2^30 */ -+ 0xCA62C1D6L}; /* Rounds 60-79: sqrt(10) * 2^30 */ -+ -+static void noinline mcfcau_sha1_transform(__u32 *digest, const char *in, __u32 *W) -+{ -+ int i; -+ u32 * tmp_p; -+ unsigned long iflags; -+ -+ /* (a) Devide M(i) into 16 words W */ -+ for (i = 0; i < 16; i++) -+ W[i] = ((const u32 *)in)[i]; -+ -+ /* (b) W[i+16] = S^1(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i]) */ -+ tmp_p=&W[16]; -+ -+ spin_lock_irqsave(&mcfcau_lock, iflags); -+ asm("move.l %0, %%a0"::"m"(tmp_p):"a0"); -+ asm("moveq.l #1, %%d3":::"d3"); -+ -+ for (i = 0; i < 64; i++){ -+ asm("cp0ld.l -64(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0)); -+ asm("cp0ld.l -56(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0)); -+ asm("cp0ld.l -32(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0)); -+ asm("cp0ld.l -12(%%a0),%%d0,#1,%0" ::"n"(MCFCAU_XOR+MCFCAU_CA0)); -+ asm("cp0ld.l %%d3,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CA0):"d3"); -+ asm("cp0st.l %%d0,(%%a0)+,#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA0)); -+ } -+ -+ /* (c) */ -+ asm("move.l %0, %%a0"::"m"(digest):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA0):"a0"); /* a */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA1):"a0"); /* b */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA2):"a0"); /* c */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA3):"a0"); /* d */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_LDR+MCFCAU_CA4):"a0"); /* e */ -+ -+ /* (d) */ -+ asm("moveq.l #5, %%d0":::"d0"); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_MVRA+MCFCAU_CA0)); -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ROTL+MCFCAU_CAA)); /*S^5(A)*/ -+ -+ tmp_p=(u32*)K; -+ asm("move.l %0, %%a0"::"m"(tmp_p):"a0"); -+ asm("move.l %0, %%a1"::"m"(W):"a1"); -+ -+ for (i = 0; i < 20; i++) { -+ /* t = f1(b, c, d) + K1 + rol32(a, 5) + e + W[i]; */ -+ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFC)); /*f(b,c,d)*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/ -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_SHS)); -+ } -+ -+ asm("add.l #4,%%a0" :::"a0"); /* update K */ -+ -+ for (; i < 40; i ++) { -+ /* t = f2(b, c, d) + K2 + rol32(a, 5) + e + W[i]; */ -+ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/ -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_SHS)); -+ } -+ -+ asm("add.l #4,%%a0" :::"a0"); /* update K */ -+ -+ for (; i < 60; i ++) { -+ /* t = f3(b, c, d) + K3 + rol32(a, 5) + e + W[i]; */ -+ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFM)); /*f(b,c,d)*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/ -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_SHS)); -+ } -+ -+ asm("add.l #4,%%a0" :::"a0"); /* update K */ -+ -+ for (; i < 80; i ++) { -+ /* t = f2(b, c, d) + K4 + rol32(a, 5) + e + W[i]; */ -+ /* e = d; d = c; c = rol32(b, 30); b = a; a = t; */ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_HASH+MCFCAU_HFH)); /*f(b,c,d)*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_ADRA+MCFCAU_CA4)); /*+e*/ -+ asm("cp0ld.l (%%a0),%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA)); /*+K*/ -+ asm("cp0ld.l (%%a1)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CAA):"a1"); /*+W*/ -+ asm("cp0ld.l %%d0,%%d0,#1,%0" ::"n"(MCFCAU_SHS)); -+ } -+ -+ /* (e) */ -+ asm("move.l %0, %%a0"::"m"(digest):"a0"); -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA0):"a0"); /* +a */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA1):"a0"); /* +b */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA2):"a0"); /* +c */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA3):"a0"); /* +d */ -+ asm("cp0ld.l (%%a0)+,%%d0,#1,%0" ::"n"(MCFCAU_ADR+MCFCAU_CA4):"a0"); /* +e */ -+ -+ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA4):"a0"); -+ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA3):"a0"); -+ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA2):"a0"); -+ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA1):"a0"); -+ asm("cp0st.l %%d0,-(%%a0),#1,%0" ::"n"(MCFCAU_STR+MCFCAU_CA0):"a0"); -+ spin_unlock_irqrestore(&mcfcau_lock, iflags); -+} -+ -+static void mcfcau_sha1_init(struct crypto_tfm *tfm) -+{ -+ struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm); -+ static const struct mcfcau_sha1_ctx initstate = { -+ 0, -+ { 0x67452301, 0xEFCDAB89, 0x98BADCFE, 0x10325476, 0xC3D2E1F0 }, -+ { 0, } -+ }; -+ -+ *sctx = initstate; -+} -+ -+static void mcfcau_sha1_update(struct crypto_tfm *tfm, const u8 *data, -+ unsigned int len) -+{ -+ struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm); -+ unsigned int partial, done; -+ const u8 *src; -+ -+ partial = sctx->count & 0x3f; -+ sctx->count += len; -+ done = 0; -+ src = data; -+ -+ if ((partial + len) > 63) { -+ u32 temp[MCFCAU_SHA1_WORKSPACE_WORDS]; -+ -+ if (partial) { -+ done = -partial; -+ memcpy(sctx->buffer + partial, data, done + 64); -+ src = sctx->buffer; -+ } -+ -+ do { -+ mcfcau_sha1_transform(sctx->state, src, temp); -+ done += 64; -+ src = data + done; -+ } while (done + 63 < len); -+ -+ memset(temp, 0, sizeof(temp)); -+ partial = 0; -+ } -+ memcpy(sctx->buffer + partial, src, len - done); -+} -+ -+ -+/* Add padding and return the message digest. */ -+static void mcfcau_sha1_final(struct crypto_tfm *tfm, u8 *out) -+{ -+ struct mcfcau_sha1_ctx *sctx = crypto_tfm_ctx(tfm); -+ u32 *dst = (u32 *)out; -+ u32 i, index, padlen; -+ u64 bits; -+ static const u8 padding[64] = { 0x80, }; -+ -+ bits = sctx->count << 3; -+ -+ /* Pad out to 56 mod 64 */ -+ index = sctx->count & 0x3f; -+ padlen = (index < 56) ? (56 - index) : ((64+56) - index); -+ mcfcau_sha1_update(tfm, padding, padlen); -+ -+ /* Append length */ -+ mcfcau_sha1_update(tfm, (const u8 *)&bits, sizeof(bits)); -+ -+ /* Store state in digest */ -+ for (i = 0; i < 5; i++) -+ dst[i] = sctx->state[i]; -+ -+ -+ /* Wipe context */ -+ memset(sctx, 0, sizeof *sctx); -+} -+ -+static struct crypto_alg mcfcau_sha1_alg = { -+ .cra_name = "sha1", -+ .cra_driver_name= "sha1-mcfcau", -+ .cra_priority = MCFCAU_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_TYPE_DIGEST, -+ .cra_blocksize = MCFCAU_SHA1_HMAC_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct mcfcau_sha1_ctx), -+ .cra_module = THIS_MODULE, -+ .cra_alignmask = 3, -+ .cra_list = LIST_HEAD_INIT(mcfcau_sha1_alg.cra_list), -+ .cra_u = { .digest = { -+ .dia_digestsize = MCFCAU_SHA1_DIGEST_SIZE, -+ .dia_init = mcfcau_sha1_init, -+ .dia_update = mcfcau_sha1_update, -+ .dia_final = mcfcau_sha1_final } } -+}; -+ -+static int __init init(void) -+{ -+ int ret = crypto_register_alg(&mcfcau_sha1_alg); -+ printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " " -+ MCFCAU_SHA1_DRIVER_VERSION " %s.\n",ret?"failed":"registered"); -+ return ret; -+} -+ -+static void __exit fini(void) -+{ -+ crypto_unregister_alg(&mcfcau_sha1_alg); -+ printk(KERN_INFO MCFCAU_SHA1_DRIVER_DESC " " -+ MCFCAU_SHA1_DRIVER_VERSION " unregistered.\n"); -+} -+ -+module_init(init); -+module_exit(fini); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION(MCFCAU_SHA1_DRIVER_DESC); -+MODULE_AUTHOR("Andrey Butok"); ---- a/drivers/dma/Makefile -+++ b/drivers/dma/Makefile -@@ -4,3 +4,5 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o - ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o - obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o - obj-$(CONFIG_FSL_DMA) += fsldma.o -+obj-$(CONFIG_MCD_DMA) += mcddma.o -+mcddma-objs := MCD_dmaApi.o MCD_tasks.o MCD_tasksInit.o ---- /dev/null -+++ b/drivers/dma/MCD_dmaApi.c -@@ -0,0 +1,965 @@ -+/* -+ * drivers/dma/MCD_dmaApi.c -+ * -+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include "MCD_dma.h" -+#include "MCD_tasksInit.h" -+#include "MCD_progCheck.h" -+ -+/********************************************************************/ -+/* -+ * This is an API-internal pointer to the DMA's registers -+ */ -+dmaRegs *MCD_dmaBar; -+ -+/* -+ * These are the real and model task tables as generated by the -+ * build process -+ */ -+extern TaskTableEntry MCD_realTaskTableSrc[NCHANNELS]; -+extern TaskTableEntry MCD_modelTaskTableSrc[NUMOFVARIANTS]; -+ -+/* -+ * However, this (usually) gets relocated to on-chip SRAM, at which -+ * point we access them as these tables -+ */ -+volatile TaskTableEntry *MCD_taskTable; -+TaskTableEntry *MCD_modelTaskTable; -+ -+ -+/* -+ * MCD_chStatus[] is an array of status indicators for remembering -+ * whether a DMA has ever been attempted on each channel, pausing -+ * status, etc. -+ */ -+static int MCD_chStatus[NCHANNELS] = -+{ -+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, -+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, -+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, -+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA -+}; -+ -+/* -+ * Prototypes for local functions -+ */ -+static void MCD_memcpy (int *dest, int *src, u32 size); -+static void MCD_resmActions (int channel); -+ -+/* -+ * Buffer descriptors used for storage of progress info for single Dmas -+ * Also used as storage for the DMA for CRCs for single DMAs -+ * Otherwise, the DMA does not parse these buffer descriptors -+ */ -+#ifdef MCD_INCLUDE_EU -+extern MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; -+#else -+MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; -+#endif -+MCD_bufDesc *MCD_relocBuffDesc; -+ -+ -+/* -+ * Defines for the debug control register's functions -+ */ -+#define DBG_CTL_COMP1_TASK (0x00002000) /* have comparator 1 look for a task # */ -+#define DBG_CTL_ENABLE (DBG_CTL_AUTO_ARM | \ -+ DBG_CTL_BREAK | \ -+ DBG_CTL_INT_BREAK | \ -+ DBG_CTL_COMP1_TASK) -+#define DBG_CTL_DISABLE (DBG_CTL_AUTO_ARM | \ -+ DBG_CTL_INT_BREAK | \ -+ DBG_CTL_COMP1_TASK) -+#define DBG_KILL_ALL_STAT (0xFFFFFFFF) -+ -+/* -+ * Offset to context save area where progress info is stored -+ */ -+#define CSAVE_OFFSET 10 -+ -+/* -+ * Defines for Byte Swapping -+ */ -+#define MCD_BYTE_SWAP_KILLER 0xFFF8888F -+#define MCD_NO_BYTE_SWAP_ATALL 0x00040000 -+ -+/* -+ * Execution Unit Identifiers -+ */ -+#define MAC 0 /* legacy - not used */ -+#define LUAC 1 /* legacy - not used */ -+#define CRC 2 /* legacy - not used */ -+#define LURC 3 /* Logic Unit with CRC */ -+ -+/* -+ * Task Identifiers -+ */ -+#define TASK_CHAINNOEU 0 -+#define TASK_SINGLENOEU 1 -+#ifdef MCD_INCLUDE_EU -+#define TASK_CHAINEU 2 -+#define TASK_SINGLEEU 3 -+#define TASK_FECRX 4 -+#define TASK_FECTX 5 -+#else -+#define TASK_CHAINEU 0 -+#define TASK_SINGLEEU 1 -+#define TASK_FECRX 2 -+#define TASK_FECTX 3 -+#endif -+ -+/* -+ * Structure to remember which variant is on which channel -+ */ -+typedef struct MCD_remVariants_struct MCD_remVariant; -+struct MCD_remVariants_struct -+{ -+ int remDestRsdIncr[NCHANNELS]; /* -1,0,1 */ -+ int remSrcRsdIncr[NCHANNELS]; /* -1,0,1 */ -+ s16 remDestIncr[NCHANNELS]; /* DestIncr */ -+ s16 remSrcIncr[NCHANNELS]; /* srcIncr */ -+ u32 remXferSize[NCHANNELS]; /* xferSize */ -+}; -+ -+/* -+ * Structure to remember the startDma parameters for each channel -+ */ -+MCD_remVariant MCD_remVariants; -+ -+/********************************************************************/ -+/* -+ * Function: MCD_initDma -+ * Purpose: Initializes the DMA API by setting up a pointer to the DMA -+ * registers, relocating and creating the appropriate task -+ * structures, and setting up some global settings -+ * Arguments: -+ * dmaBarAddr - pointer to the multichannel DMA registers -+ * taskTableDest - location to move DMA task code and structs to -+ * flags - operational parameters -+ * Return Value: -+ * MCD_TABLE_UNALIGNED if taskTableDest is not 512-byte aligned -+ * MCD_OK otherwise -+ */ -+extern u32 MCD_funcDescTab0[]; -+ -+int MCD_initDma (dmaRegs *dmaBarAddr, void *taskTableDest, u32 flags) -+{ -+ int i; -+ TaskTableEntry *entryPtr; -+ -+ /* Setup the local pointer to register set */ -+ MCD_dmaBar = dmaBarAddr; -+ -+ /* Do we need to move/create a task table */ -+ if ((flags & MCD_RELOC_TASKS) != 0) -+ { -+ int fixedSize; -+ u32 *fixedPtr; -+ int varTabsOffset, funcDescTabsOffset, contextSavesOffset; -+ int taskDescTabsOffset; -+ int taskTableSize, varTabsSize, funcDescTabsSize, contextSavesSize; -+ int taskDescTabSize; -+ -+ int i; -+ -+ /* Check if physical address is aligned on 512 byte boundary */ -+ if (((u32)taskTableDest & 0x000001ff) != 0) -+ return(MCD_TABLE_UNALIGNED); -+ -+ MCD_taskTable = taskTableDest; /* set up local pointer to task Table */ -+ -+ /* -+ * Create a task table: -+ * - compute aligned base offsets for variable tables and -+ * function descriptor tables, then -+ * - loop through the task table and setup the pointers -+ * - copy over model task table with the the actual task descriptor -+ * tables -+ */ -+ taskTableSize = NCHANNELS * sizeof(TaskTableEntry); -+ /* Align variable tables to size */ -+ varTabsOffset = taskTableSize + (u32)taskTableDest; -+ if ((varTabsOffset & (VAR_TAB_SIZE - 1)) != 0) -+ varTabsOffset = (varTabsOffset + VAR_TAB_SIZE) & (~VAR_TAB_SIZE); -+ /* Align function descriptor tables */ -+ varTabsSize = NCHANNELS * VAR_TAB_SIZE; -+ funcDescTabsOffset = varTabsOffset + varTabsSize; -+ -+ if ((funcDescTabsOffset & (FUNCDESC_TAB_SIZE - 1)) != 0) -+ funcDescTabsOffset = (funcDescTabsOffset + FUNCDESC_TAB_SIZE) & -+ (~FUNCDESC_TAB_SIZE); -+ -+ funcDescTabsSize = FUNCDESC_TAB_NUM * FUNCDESC_TAB_SIZE; -+ contextSavesOffset = funcDescTabsOffset + funcDescTabsSize; -+ contextSavesSize = (NCHANNELS * CONTEXT_SAVE_SIZE); -+ fixedSize = taskTableSize + varTabsSize + funcDescTabsSize + -+ contextSavesSize; -+ -+ /* Zero the thing out */ -+ fixedPtr = (u32 *)taskTableDest; -+ for (i = 0;i<(fixedSize/4);i++) -+ fixedPtr[i] = 0; -+ -+ entryPtr = (TaskTableEntry*)MCD_taskTable; -+ /* Set up fixed pointers */ -+ for (i = 0; i < NCHANNELS; i++) -+ { -+ entryPtr[i].varTab = (u32)varTabsOffset; /* update ptr to local value */ -+ entryPtr[i].FDTandFlags = (u32)funcDescTabsOffset | MCD_TT_FLAGS_DEF; -+ entryPtr[i].contextSaveSpace = (u32)contextSavesOffset; -+ varTabsOffset += VAR_TAB_SIZE; -+#ifdef MCD_INCLUDE_EU /* if not there is only one, just point to the same one */ -+ funcDescTabsOffset += FUNCDESC_TAB_SIZE; -+#endif -+ contextSavesOffset += CONTEXT_SAVE_SIZE; -+ } -+ /* Copy over the function descriptor table */ -+ for ( i = 0; i < FUNCDESC_TAB_NUM; i++) -+ { -+ MCD_memcpy((void*)(entryPtr[i].FDTandFlags & ~MCD_TT_FLAGS_MASK), -+ (void*)MCD_funcDescTab0, FUNCDESC_TAB_SIZE); -+ } -+ -+ /* Copy model task table to where the context save stuff leaves off */ -+ MCD_modelTaskTable = (TaskTableEntry*)contextSavesOffset; -+ -+ MCD_memcpy ((void*)MCD_modelTaskTable, (void*)MCD_modelTaskTableSrc, -+ NUMOFVARIANTS * sizeof(TaskTableEntry)); -+ -+ /* Point to local version of model task table */ -+ entryPtr = MCD_modelTaskTable; -+ taskDescTabsOffset = (u32)MCD_modelTaskTable + -+ (NUMOFVARIANTS * sizeof(TaskTableEntry)); -+ -+ /* Copy actual task code and update TDT ptrs in local model task table */ -+ for (i = 0; i < NUMOFVARIANTS; i++) -+ { -+ taskDescTabSize = entryPtr[i].TDTend - entryPtr[i].TDTstart + 4; -+ MCD_memcpy ((void*)taskDescTabsOffset, (void*)entryPtr[i].TDTstart, taskDescTabSize); -+ entryPtr[i].TDTstart = (u32)taskDescTabsOffset; -+ taskDescTabsOffset += taskDescTabSize; -+ entryPtr[i].TDTend = (u32)taskDescTabsOffset - 4; -+ } -+#ifdef MCD_INCLUDE_EU -+ /* -+ * Tack single DMA BDs onto end of code so API controls where -+ * they are since DMA might write to them -+ */ -+ MCD_relocBuffDesc = (MCD_bufDesc*)(entryPtr[NUMOFVARIANTS - 1].TDTend + 4); -+#else -+ /* -+ * DMA does not touch them so they can be wherever and we don't need to -+ * waste SRAM on them -+ */ -+ MCD_relocBuffDesc = MCD_singleBufDescs; -+#endif -+ } -+ else -+ { -+ /* -+ * Point the would-be relocated task tables and the buffer descriptors -+ * to the ones the linker generated -+ */ -+ if (((u32)MCD_realTaskTableSrc & 0x000001ff) != 0) -+ return(MCD_TABLE_UNALIGNED); -+ -+ entryPtr = MCD_realTaskTableSrc; -+ for (i = 0; i < NCHANNELS; i++) -+ { -+ if (((entryPtr[i].varTab & (VAR_TAB_SIZE - 1)) != 0) || -+ ((entryPtr[i].FDTandFlags & (FUNCDESC_TAB_SIZE - 1)) != 0)) -+ return(MCD_TABLE_UNALIGNED); -+ } -+ -+ MCD_taskTable = MCD_realTaskTableSrc; -+ MCD_modelTaskTable = MCD_modelTaskTableSrc; -+ MCD_relocBuffDesc = MCD_singleBufDescs; -+ } -+ -+ /* Make all channels inactive, and remember them as such: */ -+ MCD_dmaBar->taskbar = (u32) MCD_taskTable; -+ for (i = 0; i < NCHANNELS; i++) -+ { -+ MCD_dmaBar->taskControl[i] = 0x0; -+ MCD_chStatus[i] = MCD_NO_DMA; -+ } -+ -+ /* Set up pausing mechanism to inactive state: */ -+ MCD_dmaBar->debugComp1 = 0; -+ MCD_dmaBar->debugComp2 = 0; -+ MCD_dmaBar->debugControl = DBG_CTL_DISABLE; -+ MCD_dmaBar->debugStatus = DBG_KILL_ALL_STAT; -+ -+ /* Enable or disable commbus prefetch */ -+ if ((flags & MCD_COMM_PREFETCH_EN) != 0) -+ MCD_dmaBar->ptdControl &= ~PTD_CTL_COMM_PREFETCH; -+ else -+ MCD_dmaBar->ptdControl |= PTD_CTL_COMM_PREFETCH; -+ -+ return(MCD_OK); -+} -+/*********************** End of MCD_initDma() ***********************/ -+ -+/********************************************************************/ -+/* Function: MCD_dmaStatus -+ * Purpose: Returns the status of the DMA on the requested channel -+ * Arguments: channel - channel number -+ * Returns: Predefined status indicators -+ */ -+int MCD_dmaStatus (int channel) -+{ -+ u16 tcrValue; -+ -+ if((channel < 0) || (channel >= NCHANNELS)) -+ return(MCD_CHANNEL_INVALID); -+ -+ tcrValue = MCD_dmaBar->taskControl[channel]; -+ if ((tcrValue & TASK_CTL_EN) == 0) -+ { /* Nothing running if last reported with task enabled */ -+ if ( MCD_chStatus[channel] == MCD_RUNNING -+ || MCD_chStatus[channel] == MCD_IDLE) -+ MCD_chStatus[channel] = MCD_DONE; -+ } -+ else /* something is running */ -+ { -+ /* There are three possibilities: paused, running or idle. */ -+ if ( MCD_chStatus[channel] == MCD_RUNNING -+ || MCD_chStatus[channel] == MCD_IDLE) -+ { -+ MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; -+ /* Determine which initiator is asserted. */ -+ if ((MCD_dmaBar->ptdDebug >> channel ) & 0x1 ) -+ MCD_chStatus[channel] = MCD_RUNNING; -+ else -+ MCD_chStatus[channel] = MCD_IDLE; -+ /* Do not change the status if it is already paused */ -+ } -+ } -+ return MCD_chStatus[channel]; -+} -+/******************** End of MCD_dmaStatus() ************************/ -+ -+/********************************************************************/ -+/* Function: MCD_startDma -+ * Ppurpose: Starts a particular kind of DMA -+ * Arguments: see below -+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK -+ */ -+ -+int MCD_startDma ( -+ int channel, /* the channel on which to run the DMA */ -+ s8 *srcAddr, /* the address to move data from, or physical buffer-descriptor address */ -+ s16 srcIncr, /* the amount to increment the source address per transfer */ -+ s8 *destAddr, /* the address to move data to */ -+ s16 destIncr, /* the amount to increment the destination address per transfer */ -+ u32 dmaSize, /* the number of bytes to transfer independent of the transfer size */ -+ u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */ -+ u32 initiator, /* what device initiates the DMA */ -+ int priority, /* priority of the DMA */ -+ u32 flags, /* flags describing the DMA */ -+ u32 funcDesc /* a description of byte swapping, bit swapping, and CRC actions */ -+#ifdef MCD_NEED_ADDR_TRANS -+ s8 *srcAddrVirt /* virtual buffer descriptor address TBD*/ -+#endif -+) -+{ -+ int srcRsdIncr, destRsdIncr; -+ int *cSave; -+ short xferSizeIncr; -+ int tcrCount = 0; -+#ifdef MCD_INCLUDE_EU -+ u32 *realFuncArray; -+#endif -+ -+ if((channel < 0) || (channel >= NCHANNELS)) -+ return(MCD_CHANNEL_INVALID); -+ -+#ifndef MCD_INCLUDE_EU -+ funcDesc = MCD_FUNC_NOEU1; -+#endif -+ -+#ifdef MCD_DEBUG -+printf("startDma:Setting up params\n"); -+#endif -+ -+ /* Enable task-wise priority */ -+ MCD_dmaBar->ptdControl |= (u16) 0x8000; -+ -+ /* Calculate additional parameters to the regular DMA calls. */ -+ srcRsdIncr = srcIncr < 0 ? -1 : (srcIncr > 0 ? 1 : 0); -+ destRsdIncr = destIncr < 0 ? -1 : (destIncr > 0 ? 1 : 0); -+ xferSizeIncr = (xferSize & 0xffff) | 0x20000000; -+ -+ /* Remember which variant is running for each channel */ -+ MCD_remVariants.remSrcRsdIncr[channel] = srcRsdIncr; -+ MCD_remVariants.remDestRsdIncr[channel] = destRsdIncr; -+ MCD_remVariants.remDestIncr[channel] = destIncr; -+ MCD_remVariants.remSrcIncr[channel] = srcIncr; -+ MCD_remVariants.remXferSize[channel] = xferSize; -+ -+ cSave = (int*)(MCD_taskTable[channel].contextSaveSpace) -+ + CSAVE_OFFSET -+ + CURRBD; -+ -+#ifdef MCD_INCLUDE_EU -+ realFuncArray = (u32 *) (MCD_taskTable[channel].FDTandFlags & 0xffffff00); -+ -+ /* -+ * Modify the LURC's normal and byte-residue-loop functions -+ * according to parameter. -+ */ -+ switch (xferSize) -+ { -+ case 4: -+ realFuncArray[(LURC*16)] = funcDesc; -+ break; -+ case 2: -+ realFuncArray[(LURC*16)] = funcDesc & 0xfffff00f; -+ break; -+ case 1: -+ default: -+ realFuncArray[(LURC*16)] = funcDesc & 0xffff000f; -+ break; -+ } -+ -+ realFuncArray[(LURC*16+1)] = 0 -+ | (funcDesc & MCD_BYTE_SWAP_KILLER) -+ | MCD_NO_BYTE_SWAP_ATALL; -+#endif -+ -+ /* Write the initiator field in the TCR and set the initiator-hold bit*/ -+ MCD_dmaBar->taskControl[channel] = 0 -+ | (initiator << 8) -+ | TASK_CTL_HIPRITSKEN -+ | TASK_CTL_HLDINITNUM; -+ -+ /* -+ * Current versions of the MPC8220 MCD have a hardware quirk that could -+ * cause the write to the TCR to collide with an MDE access to the -+ * initiator-register file, so we have to verify that the write occurred -+ * correctly by reading back the value. On MCF547x/8x devices and any -+ * future revisions of the MPC8220, this loop will not be entered. -+ */ -+ while(((MCD_dmaBar->taskControl[channel] & 0x1fff) != -+ ((initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM)) && -+ (tcrCount < 1000)) -+ { -+ tcrCount++; -+ MCD_dmaBar->taskControl[channel] = 0 -+ | (initiator << 8) -+ | TASK_CTL_HIPRITSKEN -+ | TASK_CTL_HLDINITNUM; -+ } -+ -+ MCD_dmaBar->priority[channel] = (u8)priority & PRIORITY_PRI_MASK; -+ -+ if (channel < 8 && channel >= 0) -+ { -+ MCD_dmaBar->taskSize0 &= ~(0xf << (7-channel)*4); -+ MCD_dmaBar->taskSize0 |= (xferSize & 3) << (((7 - channel)*4) + 2); -+ MCD_dmaBar->taskSize0 |= (xferSize & 3) << ((7 - channel)*4); -+ } -+ else -+ { -+ MCD_dmaBar->taskSize1 &= ~(0xf << (15-channel)*4); -+ MCD_dmaBar->taskSize1 |= (xferSize & 3) << (((15 - channel)*4) + 2); -+ MCD_dmaBar->taskSize1 |= (xferSize & 3) << ((15 - channel)*4); -+ } -+ -+ /* Setup task table flags/options */ -+ MCD_taskTable[channel].FDTandFlags &= ~MCD_TT_FLAGS_MASK; -+ MCD_taskTable[channel].FDTandFlags |= (MCD_TT_FLAGS_MASK & flags); -+ -+ if (flags & MCD_FECTX_DMA) -+ { -+ /* TDTStart and TDTEnd */ -+ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_FECTX].TDTstart; -+ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_FECTX].TDTend; -+ MCD_startDmaENetXmit(srcAddr, srcAddr, destAddr, MCD_taskTable, channel); -+ } -+ else if (flags & MCD_FECRX_DMA) -+ { -+ /* TDTStart and TDTEnd */ -+ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_FECRX].TDTstart; -+ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_FECRX].TDTend; -+ MCD_startDmaENetRcv(srcAddr, srcAddr, destAddr, MCD_taskTable, channel); -+ } -+ else if(flags & MCD_SINGLE_DMA) -+ { -+ /* -+ * This buffer descriptor is used for storing off initial parameters -+ * for later progress query calculation and for the DMA to write the -+ * resulting checksum. The DMA does not use this to determine how to -+ * operate, that info is passed with the init routine -+ */ -+ MCD_relocBuffDesc[channel].srcAddr = srcAddr; -+ MCD_relocBuffDesc[channel].destAddr = destAddr; -+ MCD_relocBuffDesc[channel].lastDestAddr = destAddr; -+ MCD_relocBuffDesc[channel].dmaSize = dmaSize; -+ MCD_relocBuffDesc[channel].flags = 0; /* not used */ -+ MCD_relocBuffDesc[channel].csumResult = 0; /* not used */ -+ MCD_relocBuffDesc[channel].next = 0; /* not used */ -+ -+ /* Initialize the progress-querying stuff to show no progress:*/ -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] -+ = (int)srcAddr; -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] -+ = (int)destAddr; -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] -+ = 0; -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] -+ = (u32) &(MCD_relocBuffDesc[channel]); -+ -+ if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2) -+ { -+ /* TDTStart and TDTEnd */ -+ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart; -+ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLENOEU].TDTend; -+ MCD_startDmaSingleNoEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize, -+ xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), -+ cSave, MCD_taskTable, channel); -+ } -+ else -+ { -+ /* TDTStart and TDTEnd */ -+ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_SINGLEEU].TDTstart; -+ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_SINGLEEU].TDTend; -+ MCD_startDmaSingleEu(srcAddr, srcIncr, destAddr, destIncr, dmaSize, -+ xferSizeIncr, flags, (int *)&(MCD_relocBuffDesc[channel]), -+ cSave, MCD_taskTable, channel); -+ } -+ } -+ else /* Chained DMA */ -+ { -+ /* Initialize the progress-querying stuff to show no progress:*/ -+#if 1 /* (!defined(MCD_NEED_ADDR_TRANS)) */ -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] -+ = (int)((MCD_bufDesc*) srcAddr)->srcAddr; -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] -+ = (int)((MCD_bufDesc*) srcAddr)->destAddr; -+#else /* if using address translation, need the virtual addr of the first buffdesc */ -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET] -+ = (int)((MCD_bufDesc*) srcAddrVirt)->srcAddr; -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET] -+ = (int)((MCD_bufDesc*) srcAddrVirt)->destAddr; -+#endif -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET] -+ = 0; -+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET] -+ = (u32) srcAddr; -+ -+ if( funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2) -+ { -+ /* TDTStart and TDTEnd */ -+ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart; -+ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINNOEU].TDTend; -+ MCD_startDmaChainNoEu((int *)srcAddr, srcIncr, destIncr, xferSize, -+ xferSizeIncr, cSave, MCD_taskTable, channel); -+ } -+ else -+ { -+ /* TDTStart and TDTEnd */ -+ MCD_taskTable[channel].TDTstart = MCD_modelTaskTable[TASK_CHAINEU].TDTstart; -+ MCD_taskTable[channel].TDTend = MCD_modelTaskTable[TASK_CHAINEU].TDTend; -+ MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr, xferSize, -+ xferSizeIncr, cSave, MCD_taskTable, channel); -+ } -+ } -+ -+ MCD_chStatus[channel] = MCD_IDLE; -+ return(MCD_OK); -+} -+ -+/************************ End of MCD_startDma() *********************/ -+ -+/********************************************************************/ -+/* Function: MCD_XferProgrQuery -+ * Purpose: Returns progress of DMA on requested channel -+ * Arguments: channel - channel to retrieve progress for -+ * progRep - pointer to user supplied MCD_XferProg struct -+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK -+ * -+ * Notes: -+ * MCD_XferProgrQuery() upon completing or after aborting a DMA, or -+ * while the DMA is in progress, this function returns the first -+ * DMA-destination address not (or not yet) used in the DMA. When -+ * encountering a non-ready buffer descriptor, the information for -+ * the last completed descriptor is returned. -+ * -+ * MCD_XferProgQuery() has to avoid the possibility of getting -+ * partially-updated information in the event that we should happen -+ * to query DMA progress just as the DMA is updating it. It does that -+ * by taking advantage of the fact context is not saved frequently for -+ * the most part. We therefore read it at least twice until we get the -+ * same information twice in a row. -+ * -+ * Because a small, but not insignificant, amount of time is required -+ * to write out the progress-query information, especially upon -+ * completion of the DMA, it would be wise to guarantee some time lag -+ * between successive readings of the progress-query information. -+ */ -+ -+/* -+ * How many iterations of the loop below to execute to stabilize values -+ */ -+#define STABTIME 0 -+ -+int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep) -+{ -+ MCD_XferProg prevRep; -+ int again; /* true if we are to try again to get consistent results */ -+ int i; /* used as a time-waste counter */ -+ int destDiffBytes; /* Total number of bytes that we think actually got xfered. */ -+ int numIterations; /* number of iterations */ -+ int bytesNotXfered; /* bytes that did not get xfered. */ -+ s8 *LWAlignedInitDestAddr, *LWAlignedCurrDestAddr; -+ int subModVal, addModVal; /* Mode values to added and subtracted from the -+ final destAddr */ -+ -+ if((channel < 0) || (channel >= NCHANNELS)) -+ return(MCD_CHANNEL_INVALID); -+ -+ /* Read a trial value for the progress-reporting values*/ -+ prevRep.lastSrcAddr = -+ (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]; -+ prevRep.lastDestAddr = -+ (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]; -+ prevRep.dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET]; -+ prevRep.currBufDesc = -+ (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET]; -+ -+ /* Repeatedly reread those values until they match previous values: */ -+ do { -+ /* Take a little bit of time to ensure stability: */ -+ for (i = 0; i < STABTIME; i++) -+ i += i >> 2; /* make sure this loop does something so that it -+ doesn't get optimized out */ -+ /* Check them again: */ -+ progRep->lastSrcAddr = -+ (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[SRCPTR + CSAVE_OFFSET]; -+ progRep->lastDestAddr = -+ (s8 *) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DESTPTR + CSAVE_OFFSET]; -+ progRep->dmaSize = ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[DCOUNT + CSAVE_OFFSET]; -+ progRep->currBufDesc = -+ (MCD_bufDesc*) ((volatile int*) MCD_taskTable[channel].contextSaveSpace)[CURRBD + CSAVE_OFFSET]; -+ -+ /* See if they match: */ -+ if ( prevRep.lastSrcAddr != progRep->lastSrcAddr -+ || prevRep.lastDestAddr != progRep->lastDestAddr -+ || prevRep.dmaSize != progRep->dmaSize -+ || prevRep.currBufDesc != progRep->currBufDesc) -+ { -+ /* If they don't match, remember previous values and try again:*/ -+ prevRep.lastSrcAddr = progRep->lastSrcAddr; -+ prevRep.lastDestAddr = progRep->lastDestAddr; -+ prevRep.dmaSize = progRep->dmaSize; -+ prevRep.currBufDesc = progRep->currBufDesc; -+ again = MCD_TRUE; -+ } -+ else -+ again = MCD_FALSE; -+ } while (again == MCD_TRUE); -+ -+ -+ /* Update dmaSize and lastDestAddr */ -+ switch(MCD_remVariants.remDestRsdIncr[channel]) -+ { -+ case MINUS1: -+ subModVal = ((int)progRep->lastDestAddr) -+ & ((MCD_remVariants.remXferSize[channel]) - 1); -+ addModVal = ((int)progRep->currBufDesc->destAddr) -+ & ((MCD_remVariants.remXferSize[channel]) - 1); -+ LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - addModVal; -+ LWAlignedCurrDestAddr = (progRep->lastDestAddr) - subModVal; -+ destDiffBytes = LWAlignedInitDestAddr - LWAlignedCurrDestAddr; -+ bytesNotXfered = (destDiffBytes/MCD_remVariants.remDestIncr[channel]) * -+ ( MCD_remVariants.remDestIncr[channel] -+ + MCD_remVariants.remXferSize[channel]); -+ progRep->dmaSize = destDiffBytes - bytesNotXfered + addModVal - subModVal; -+ break; -+ case ZERO: -+ progRep->lastDestAddr = progRep->currBufDesc->destAddr; -+ break; -+ case PLUS1: -+ /* This value has to be subtracted from the final calculated dmaSize. */ -+ subModVal = ((int)progRep->currBufDesc->destAddr) -+ & ((MCD_remVariants.remXferSize[channel]) - 1); -+ /* These bytes are already in lastDestAddr. */ -+ addModVal = ((int)progRep->lastDestAddr) -+ & ((MCD_remVariants.remXferSize[channel]) - 1); -+ LWAlignedInitDestAddr = (progRep->currBufDesc->destAddr) - subModVal; -+ LWAlignedCurrDestAddr = (progRep->lastDestAddr) - addModVal; -+ destDiffBytes = (progRep->lastDestAddr - LWAlignedInitDestAddr); -+ numIterations = ( LWAlignedCurrDestAddr - LWAlignedInitDestAddr)/MCD_remVariants.remDestIncr[channel]; -+ bytesNotXfered = numIterations * -+ (MCD_remVariants.remDestIncr[channel] -+ - MCD_remVariants.remXferSize[channel]); -+ progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal; -+ break; -+ default: -+ break; -+ } -+ -+ /* This covers M1,P1,Z for source */ -+ switch(MCD_remVariants.remSrcRsdIncr[channel]) -+ { -+ case MINUS1: -+ progRep->lastSrcAddr = -+ progRep->currBufDesc->srcAddr + -+ ( MCD_remVariants.remSrcIncr[channel] * -+ (progRep->dmaSize/MCD_remVariants.remXferSize[channel])); -+ break; -+ case ZERO: -+ progRep->lastSrcAddr = progRep->currBufDesc->srcAddr; -+ break; -+ case PLUS1: -+ progRep->lastSrcAddr = -+ progRep->currBufDesc->srcAddr + -+ ( MCD_remVariants.remSrcIncr[channel] * -+ (progRep->dmaSize/MCD_remVariants.remXferSize[channel])); -+ break; -+ default: -+ break; -+ } -+ -+ return(MCD_OK); -+} -+/******************* End of MCD_XferProgrQuery() ********************/ -+ -+/********************************************************************/ -+/* MCD_resmActions() does the majority of the actions of a DMA resume. -+ * It is called from MCD_killDma() and MCD_resumeDma(). It has to be -+ * a separate function because the kill function has to negate the task -+ * enable before resuming it, but the resume function has to do nothing -+ * if there is no DMA on that channel (i.e., if the enable bit is 0). -+ */ -+static void MCD_resmActions (int channel) -+{ -+ MCD_dmaBar->debugControl = DBG_CTL_DISABLE; -+ MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus; -+ -+ /* Determine which initiators are asserted */ -+ MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; -+ -+ if((MCD_dmaBar->ptdDebug >> channel ) & 0x1) -+ MCD_chStatus[channel] = MCD_RUNNING; -+ else -+ MCD_chStatus[channel] = MCD_IDLE; -+} -+/********************* End of MCD_resmActions() *********************/ -+ -+/********************************************************************/ -+/* Function: MCD_killDma -+ * Purpose: Halt the DMA on the requested channel, without any -+ * intention of resuming the DMA. -+ * Arguments: channel - requested channel -+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK -+ * -+ * Notes: -+ * A DMA may be killed from any state, including paused state, and it -+ * always goes to the MCD_HALTED state even if it is killed while in -+ * the MCD_NO_DMA or MCD_IDLE states. -+ */ -+int MCD_killDma (int channel) -+{ -+ if((channel < 0) || (channel >= NCHANNELS)) -+ return(MCD_CHANNEL_INVALID); -+ -+ MCD_dmaBar->taskControl[channel] = 0x0; -+ -+ /* Clean up after a paused task */ -+ if (MCD_chStatus[channel] == MCD_PAUSED) -+ { -+ MCD_dmaBar->debugControl = DBG_CTL_DISABLE; -+ MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus; -+ } -+ -+ MCD_chStatus[channel] = MCD_HALTED; -+ -+ return(MCD_OK); -+} -+/************************ End of MCD_killDma() **********************/ -+ -+/********************************************************************/ -+/* Function: MCD_continDma -+ * Purpose: Continue a DMA which as stopped due to encountering an -+ * unready buffer descriptor. -+ * Arguments: channel - channel to continue the DMA on -+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK -+ * -+ * Notes: -+ * This routine does not check to see if there is a task which can -+ * be continued. Also this routine should not be used with single DMAs. -+ */ -+int MCD_continDma (int channel) -+{ -+ if((channel < 0) || (channel >= NCHANNELS)) -+ return(MCD_CHANNEL_INVALID); -+ -+ MCD_dmaBar->taskControl[channel] |= TASK_CTL_EN; -+ MCD_chStatus[channel] = MCD_RUNNING; -+ -+ return(MCD_OK); -+} -+/********************** End of MCD_continDma() **********************/ -+ -+/********************************************************************* -+ * MCD_pauseDma() and MCD_resumeDma() below use the DMA's debug unit -+ * to freeze a task and resume it. We freeze a task by breakpointing -+ * on the stated task. That is, not any specific place in the task, -+ * but any time that task executes. In particular, when that task -+ * executes, we want to freeze that task and only that task. -+ * -+ * The bits of the debug control register influence interrupts vs. -+ * breakpoints as follows: -+ * - Bits 14 and 0 enable or disable debug functions. If enabled, you -+ * will get the interrupt but you may or may not get a breakpoint. -+ * - Bits 2 and 1 decide whether you also get a breakpoint in addition -+ * to an interrupt. -+ * -+ * The debug unit can do these actions in response to either internally -+ * detected breakpoint conditions from the comparators, or in response -+ * to the external breakpoint pin, or both. -+ * - Bits 14 and 1 perform the above-described functions for -+ * internally-generated conditions, i.e., the debug comparators. -+ * - Bits 0 and 2 perform the above-described functions for external -+ * conditions, i.e., the breakpoint external pin. -+ * -+ * Note that, although you "always" get the interrupt when you turn -+ * the debug functions, the interrupt can nevertheless, if desired, be -+ * masked by the corresponding bit in the PTD's IMR. Note also that -+ * this means that bits 14 and 0 must enable debug functions before -+ * bits 1 and 2, respectively, have any effect. -+ * -+ * NOTE: It's extremely important to not pause more than one DMA channel -+ * at a time. -+ ********************************************************************/ -+ -+/********************************************************************/ -+/* Function: MCD_pauseDma -+ * Purpose: Pauses the DMA on a given channel (if any DMA is running -+ * on that channel). -+ * Arguments: channel -+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK -+ */ -+int MCD_pauseDma (int channel) -+{ -+ if((channel < 0) || (channel >= NCHANNELS)) -+ return(MCD_CHANNEL_INVALID); -+ -+ if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN) -+ { -+ MCD_dmaBar->debugComp1 = channel; -+ MCD_dmaBar->debugControl = DBG_CTL_ENABLE | (1 << (channel + 16)); -+ MCD_chStatus[channel] = MCD_PAUSED; -+ } -+ return(MCD_OK); -+} -+/************************* End of MCD_pauseDma() ********************/ -+ -+/********************************************************************/ -+/* Function: MCD_resumeDma -+ * Purpose: Resumes the DMA on a given channel (if any DMA is -+ * running on that channel). -+ * Arguments: channel - channel on which to resume DMA -+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK -+ */ -+int MCD_resumeDma (int channel) -+{ -+ if((channel < 0) || (channel >= NCHANNELS)) -+ return(MCD_CHANNEL_INVALID); -+ -+ if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN) -+ MCD_resmActions (channel); -+ -+ return(MCD_OK); -+} -+/************************ End of MCD_resumeDma() ********************/ -+ -+/********************************************************************/ -+/* Function: MCD_csumQuery -+ * Purpose: Provide the checksum after performing a non-chained DMA -+ * Arguments: channel - channel to report on -+ * csum - pointer to where to write the checksum/CRC -+ * Returns: MCD_ERROR if the channel is invalid, else MCD_OK -+ * -+ * Notes: -+ * -+ */ -+int MCD_csumQuery (int channel, u32 *csum) -+{ -+#ifdef MCD_INCLUDE_EU -+ if((channel < 0) || (channel >= NCHANNELS)) -+ return(MCD_CHANNEL_INVALID); -+ -+ *csum = MCD_relocBuffDesc[channel].csumResult; -+ return(MCD_OK); -+#else -+ return(MCD_ERROR); -+#endif -+} -+/*********************** End of MCD_resumeDma() *********************/ -+ -+/********************************************************************/ -+/* Function: MCD_getCodeSize -+ * Purpose: Provide the size requirements of the microcoded tasks -+ * Returns: Size in bytes -+ */ -+int MCD_getCodeSize(void) -+{ -+#ifdef MCD_INCLUDE_EU -+ return(0x2b64); -+#else -+ return(0x1744); -+#endif -+} -+/********************** End of MCD_getCodeSize() ********************/ -+ -+/********************************************************************/ -+/* Function: MCD_getVersion -+ * Purpose: Provide the version string and number -+ * Arguments: longVersion - user supplied pointer to a pointer to a char -+ * which points to the version string -+ * Returns: Version number and version string (by reference) -+ */ -+char MCD_versionString[] = "Multi-channel DMA API v1.0"; -+#define MCD_REV_MAJOR 0x01 -+#define MCD_REV_MINOR 0x00 -+ -+int MCD_getVersion(char **longVersion) -+{ -+ *longVersion = MCD_versionString; -+ return((MCD_REV_MAJOR << 8) | MCD_REV_MINOR); -+} -+/********************** End of MCD_getVersion() *********************/ -+ -+/********************************************************************/ -+/* Private version of memcpy() -+ * Note that everything this is used for is longword-aligned. -+ */ -+static void MCD_memcpy (int *dest, int *src, u32 size) -+{ -+ u32 i; -+ -+ for (i = 0; i < size; i += sizeof(int), dest++, src++) -+ *dest = *src; -+} -+/********************************************************************/ ---- /dev/null -+++ b/drivers/dma/MCD_dma.h -@@ -0,0 +1,378 @@ -+/* -+ * drivers/dma/MCD_dma.h -+ * -+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+#ifndef _MCD_API_H -+#define _MCD_API_H -+ -+/* -+ * Turn Execution Unit tasks ON (#define) or OFF (#undef) -+ */ -+#undef MCD_INCLUDE_EU -+ -+/* -+ * Number of DMA channels -+ */ -+#define NCHANNELS 16 -+ -+/* -+ * Total number of variants -+ */ -+#ifdef MCD_INCLUDE_EU -+#define NUMOFVARIANTS 6 -+#else -+#define NUMOFVARIANTS 4 -+#endif -+ -+/* -+ * Define sizes of the various tables -+ */ -+#define TASK_TABLE_SIZE (NCHANNELS*32) -+#define VAR_TAB_SIZE (128) -+#define CONTEXT_SAVE_SIZE (128) -+#define FUNCDESC_TAB_SIZE (256) -+ -+#ifdef MCD_INCLUDE_EU -+#define FUNCDESC_TAB_NUM 16 -+#else -+#define FUNCDESC_TAB_NUM 1 -+#endif -+ -+ -+#ifndef DEFINESONLY -+ -+/* -+ * Portability typedefs -+ */ -+typedef int s32; -+typedef unsigned int u32; -+typedef short s16; -+typedef unsigned short u16; -+typedef char s8; -+typedef unsigned char u8; -+ -+/* -+ * These structures represent the internal registers of the -+ * multi-channel DMA -+ */ -+struct dmaRegs_s { -+ u32 taskbar; /* task table base address register */ -+ u32 currPtr; -+ u32 endPtr; -+ u32 varTablePtr; -+ u16 dma_rsvd0; -+ u16 ptdControl; /* ptd control */ -+ u32 intPending; /* interrupt pending register */ -+ u32 intMask; /* interrupt mask register */ -+ u16 taskControl[16]; /* task control registers */ -+ u8 priority[32]; /* priority registers */ -+ u32 initiatorMux; /* initiator mux control */ -+ u32 taskSize0; /* task size control register 0. */ -+ u32 taskSize1; /* task size control register 1. */ -+ u32 dma_rsvd1; /* reserved */ -+ u32 dma_rsvd2; /* reserved */ -+ u32 debugComp1; /* debug comparator 1 */ -+ u32 debugComp2; /* debug comparator 2 */ -+ u32 debugControl; /* debug control */ -+ u32 debugStatus; /* debug status */ -+ u32 ptdDebug; /* priority task decode debug */ -+ u32 dma_rsvd3[31]; /* reserved */ -+}; -+typedef volatile struct dmaRegs_s dmaRegs; -+ -+#endif -+ -+/* -+ * PTD contrl reg bits -+ */ -+#define PTD_CTL_TSK_PRI 0x8000 -+#define PTD_CTL_COMM_PREFETCH 0x0001 -+ -+/* -+ * Task Control reg bits and field masks -+ */ -+#define TASK_CTL_EN 0x8000 -+#define TASK_CTL_VALID 0x4000 -+#define TASK_CTL_ALWAYS 0x2000 -+#define TASK_CTL_INIT_MASK 0x1f00 -+#define TASK_CTL_ASTRT 0x0080 -+#define TASK_CTL_HIPRITSKEN 0x0040 -+#define TASK_CTL_HLDINITNUM 0x0020 -+#define TASK_CTL_ASTSKNUM_MASK 0x000f -+ -+/* -+ * Priority reg bits and field masks -+ */ -+#define PRIORITY_HLD 0x80 -+#define PRIORITY_PRI_MASK 0x07 -+ -+/* -+ * Debug Control reg bits and field masks -+ */ -+#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000 -+#define DBG_CTL_AUTO_ARM 0x00008000 -+#define DBG_CTL_BREAK 0x00004000 -+#define DBG_CTL_COMP1_TYP_MASK 0x00003800 -+#define DBG_CTL_COMP2_TYP_MASK 0x00000070 -+#define DBG_CTL_EXT_BREAK 0x00000004 -+#define DBG_CTL_INT_BREAK 0x00000002 -+ -+/* -+ * PTD Debug reg selector addresses -+ * This reg must be written with a value to show the contents of -+ * one of the desired internal register. -+ */ -+#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */ -+#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and -+ have initiators asserted */ -+ -+ -+/* -+ * General return values -+ */ -+#define MCD_OK 0 -+#define MCD_ERROR -1 -+#define MCD_TABLE_UNALIGNED -2 -+#define MCD_CHANNEL_INVALID -3 -+ -+/* -+ * MCD_initDma input flags -+ */ -+#define MCD_RELOC_TASKS 0x00000001 -+#define MCD_NO_RELOC_TASKS 0x00000000 -+#define MCD_COMM_PREFETCH_EN 0x00000002 /* Commbus Prefetching - MCF547x/548x ONLY */ -+ -+/* -+ * MCD_dmaStatus Status Values for each channel -+ */ -+#define MCD_NO_DMA 1 /* No DMA has been requested since reset */ -+#define MCD_IDLE 2 /* DMA active, but the initiator is currently inactive */ -+#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */ -+#define MCD_PAUSED 4 /* DMA active but it is currently paused */ -+#define MCD_HALTED 5 /* the most recent DMA has been killed with MCD_killTask() */ -+#define MCD_DONE 6 /* the most recent DMA has completed. */ -+ -+ -+/* -+ * MCD_startDma parameter defines -+ */ -+ -+/* -+ * Constants for the funcDesc parameter -+ */ -+/* Byte swapping: */ -+#define MCD_NO_BYTE_SWAP 0x00045670 /* to disable byte swapping. */ -+#define MCD_BYTE_REVERSE 0x00076540 /* to reverse the bytes of each u32 of the DMAed data. */ -+#define MCD_U16_REVERSE 0x00067450 /* to reverse the 16-bit halves of -+ each 32-bit data value being DMAed.*/ -+#define MCD_U16_BYTE_REVERSE 0x00054760 /* to reverse the byte halves of each -+ 16-bit half of each 32-bit data value DMAed */ -+#define MCD_NO_BIT_REV 0x00000000 /* do not reverse the bits of each byte DMAed. */ -+#define MCD_BIT_REV 0x00088880 /* reverse the bits of each byte DMAed */ -+/* CRCing: */ -+#define MCD_CRC16 0xc0100000 /* to perform CRC-16 on DMAed data. */ -+#define MCD_CRCCCITT 0xc0200000 /* to perform CRC-CCITT on DMAed data. */ -+#define MCD_CRC32 0xc0300000 /* to perform CRC-32 on DMAed data. */ -+#define MCD_CSUMINET 0xc0400000 /* to perform internet checksums on DMAed data.*/ -+#define MCD_NO_CSUM 0xa0000000 /* to perform no checksumming. */ -+ -+#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM) -+#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM) -+ -+/* -+ * Constants for the flags parameter -+ */ -+#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */ -+#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */ -+#define MCD_TT_FLAGS_SP 0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY */ -+#define MCD_TT_FLAGS_PI 0x00000040 /* Precise Increment */ -+#define MCD_TT_FLAGS_MASK 0x000000ff -+#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW) -+ -+#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */ -+#define MCD_CHAIN_DMA /* TBD */ -+#define MCD_EU_DMA /* TBD */ -+#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */ -+#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */ -+ -+ -+/* these flags are valid for MCD_startDma and the chained buffer descriptors */ -+#define MCD_BUF_READY 0x80000000 /* indicates that this buffer is now under the DMA's control */ -+#define MCD_WRAP 0x20000000 /* to tell the FEC Dmas to wrap to the first BD */ -+#define MCD_INTERRUPT 0x10000000 /* to generate an interrupt after completion of the DMA. */ -+#define MCD_END_FRAME 0x08000000 /* tell the DMA to end the frame when transferring -+ last byte of data in buffer */ -+#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum -+ prior to performing the DMA. */ -+ -+/* Defines for the FEC buffer descriptor control/status word*/ -+#define MCD_FEC_BUF_READY 0x8000 -+#define MCD_FEC_WRAP 0x2000 -+#define MCD_FEC_INTERRUPT 0x1000 -+#define MCD_FEC_END_FRAME 0x0800 -+ -+ -+/* -+ * Defines for general intuitiveness -+ */ -+ -+#define MCD_TRUE 1 -+#define MCD_FALSE 0 -+ -+/* -+ * Three different cases for destination and source. -+ */ -+#define MINUS1 -1 -+#define ZERO 0 -+#define PLUS1 1 -+ -+#ifndef DEFINESONLY -+ -+/* Task Table Entry struct*/ -+typedef struct { -+ u32 TDTstart; /* task descriptor table start */ -+ u32 TDTend; /* task descriptor table end */ -+ u32 varTab; /* variable table start */ -+ u32 FDTandFlags; /* function descriptor table start and flags */ -+ volatile u32 descAddrAndStatus; -+ volatile u32 modifiedVarTab; -+ u32 contextSaveSpace; /* context save space start */ -+ u32 literalBases; -+} TaskTableEntry; -+ -+ -+/* Chained buffer descriptor */ -+typedef volatile struct MCD_bufDesc_struct MCD_bufDesc; -+struct MCD_bufDesc_struct { -+ u32 flags; /* flags describing the DMA */ -+ u32 csumResult; /* checksum from checksumming performed since last checksum reset */ -+ s8 *srcAddr; /* the address to move data from */ -+ s8 *destAddr; /* the address to move data to */ -+ s8 *lastDestAddr; /* the last address written to */ -+ u32 dmaSize; /* the number of bytes to transfer independent of the transfer size */ -+ MCD_bufDesc *next; /* next buffer descriptor in chain */ -+ u32 info; /* private information about this descriptor; DMA does not affect it */ -+}; -+ -+/* Progress Query struct */ -+typedef volatile struct MCD_XferProg_struct { -+ s8 *lastSrcAddr; /* the most-recent or last, post-increment source address */ -+ s8 *lastDestAddr; /* the most-recent or last, post-increment destination address */ -+ u32 dmaSize; /* the amount of data transferred for the current buffer */ -+ MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */ -+} MCD_XferProg; -+ -+ -+/* FEC buffer descriptor */ -+typedef volatile struct MCD_bufDescFec_struct { -+ u16 statCtrl; -+ u16 length; -+ u32 dataPointer; -+} MCD_bufDescFec; -+ -+ -+/*************************************************************************/ -+/* -+ * API function Prototypes - see MCD_dmaApi.c for further notes -+ */ -+ -+/* -+ * MCD_startDma starts a particular kind of DMA . -+ */ -+int MCD_startDma ( -+ int channel, /* the channel on which to run the DMA */ -+ s8 *srcAddr, /* the address to move data from, or buffer-descriptor address */ -+ s16 srcIncr, /* the amount to increment the source address per transfer */ -+ s8 *destAddr, /* the address to move data to */ -+ s16 destIncr, /* the amount to increment the destination address per transfer */ -+ u32 dmaSize, /* the number of bytes to transfer independent of the transfer size */ -+ u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */ -+ u32 initiator, /* what device initiates the DMA */ -+ int priority, /* priority of the DMA */ -+ u32 flags, /* flags describing the DMA */ -+ u32 funcDesc /* a description of byte swapping, bit swapping, and CRC actions */ -+); -+ -+/* -+ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA -+ * registers, relocating and creating the appropriate task structures, and -+ * setting up some global settings -+ */ -+int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags); -+ -+/* -+ * MCD_dmaStatus() returns the status of the DMA on the requested channel. -+ */ -+int MCD_dmaStatus (int channel); -+ -+/* -+ * MCD_XferProgrQuery() returns progress of DMA on requested channel -+ */ -+int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep); -+ -+/* -+ * MCD_killDma() halts the DMA on the requested channel, without any -+ * intention of resuming the DMA. -+ */ -+int MCD_killDma (int channel); -+ -+/* -+ * MCD_continDma() continues a DMA which as stopped due to encountering an -+ * unready buffer descriptor. -+ */ -+int MCD_continDma (int channel); -+ -+/* -+ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is -+ * running on that channel). -+ */ -+int MCD_pauseDma (int channel); -+ -+/* -+ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is -+ * running on that channel). -+ */ -+int MCD_resumeDma (int channel); -+ -+/* -+ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA -+ */ -+int MCD_csumQuery (int channel, u32 *csum); -+ -+/* -+ * MCD_getCodeSize provides the packed size required by the microcoded task -+ * and structures. -+ */ -+int MCD_getCodeSize(void); -+ -+/* -+ * MCD_getVersion provides a pointer to a version string and returns a -+ * version number. -+ */ -+int MCD_getVersion(char **longVersion); -+ -+/* macro for setting a location in the variable table */ -+#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value -+ /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function, -+ so I'm avoiding surrounding it with "do {} while(0)" */ -+ -+#endif /* DEFINESONLY */ -+ -+#endif /* _MCD_API_H */ ---- /dev/null -+++ b/drivers/dma/MCD_progCheck.h -@@ -0,0 +1,28 @@ -+/* -+ * drivers/dma/MCD_progCheck.h -+ * -+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* This file is autogenerated. Do not change */ -+ -+#define CURRBD 4 -+#define DCOUNT 6 -+#define DESTPTR 5 -+#define SRCPTR 7 ---- /dev/null -+++ b/drivers/dma/MCD_tasks.c -@@ -0,0 +1,2465 @@ -+/* -+ * drivers/dma/MCD_tasks.c -+ * -+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include "MCD_dma.h" -+ -+u32 MCD_varTab0[]; -+u32 MCD_varTab1[]; -+u32 MCD_varTab2[]; -+u32 MCD_varTab3[]; -+u32 MCD_varTab4[]; -+u32 MCD_varTab5[]; -+u32 MCD_varTab6[]; -+u32 MCD_varTab7[]; -+u32 MCD_varTab8[]; -+u32 MCD_varTab9[]; -+u32 MCD_varTab10[]; -+u32 MCD_varTab11[]; -+u32 MCD_varTab12[]; -+u32 MCD_varTab13[]; -+u32 MCD_varTab14[]; -+u32 MCD_varTab15[]; -+ -+u32 MCD_funcDescTab0[]; -+#ifdef MCD_INCLUDE_EU -+u32 MCD_funcDescTab1[]; -+u32 MCD_funcDescTab2[]; -+u32 MCD_funcDescTab3[]; -+u32 MCD_funcDescTab4[]; -+u32 MCD_funcDescTab5[]; -+u32 MCD_funcDescTab6[]; -+u32 MCD_funcDescTab7[]; -+u32 MCD_funcDescTab8[]; -+u32 MCD_funcDescTab9[]; -+u32 MCD_funcDescTab10[]; -+u32 MCD_funcDescTab11[]; -+u32 MCD_funcDescTab12[]; -+u32 MCD_funcDescTab13[]; -+u32 MCD_funcDescTab14[]; -+u32 MCD_funcDescTab15[]; -+#endif -+ -+u32 MCD_contextSave0[]; -+u32 MCD_contextSave1[]; -+u32 MCD_contextSave2[]; -+u32 MCD_contextSave3[]; -+u32 MCD_contextSave4[]; -+u32 MCD_contextSave5[]; -+u32 MCD_contextSave6[]; -+u32 MCD_contextSave7[]; -+u32 MCD_contextSave8[]; -+u32 MCD_contextSave9[]; -+u32 MCD_contextSave10[]; -+u32 MCD_contextSave11[]; -+u32 MCD_contextSave12[]; -+u32 MCD_contextSave13[]; -+u32 MCD_contextSave14[]; -+u32 MCD_contextSave15[]; -+ -+u32 MCD_realTaskTableSrc[] = -+{ -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab0, /* Task 0 Variable Table */ -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave0, /* Task 0 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab1, /* Task 1 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab1, /* Task 1 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave1, /* Task 1 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab2, /* Task 2 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab2, /* Task 2 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave2, /* Task 2 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab3, /* Task 3 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab3, /* Task 3 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave3, /* Task 3 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab4, /* Task 4 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab4, /* Task 4 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave4, /* Task 4 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab5, /* Task 5 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab5, /* Task 5 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave5, /* Task 5 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab6, /* Task 6 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab6, /* Task 6 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave6, /* Task 6 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab7, /* Task 7 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab7, /* Task 7 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave7, /* Task 7 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab8, /* Task 8 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab8, /* Task 8 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave8, /* Task 8 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab9, /* Task 9 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab9, /* Task 9 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave9, /* Task 9 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab10, /* Task 10 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab10, /* Task 10 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave10, /* Task 10 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab11, /* Task 11 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab11, /* Task 11 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave11, /* Task 11 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab12, /* Task 12 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab12, /* Task 12 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave12, /* Task 12 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab13, /* Task 13 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab13, /* Task 13 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave13, /* Task 13 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab14, /* Task 14 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab14, /* Task 14 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave14, /* Task 14 context save space */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_varTab15, /* Task 15 Variable Table */ -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_funcDescTab15, /* Task 15 Function Descriptor Table & Flags */ -+#else -+ (u32)MCD_funcDescTab0, /* Task 0 Function Descriptor Table & Flags */ -+#endif -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_contextSave15, /* Task 15 context save space */ -+ 0x00000000, -+}; -+ -+ -+u32 MCD_varTab0[] = -+{ /* Task 0 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+ -+u32 MCD_varTab1[] = -+{ /* Task 1 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab2[]= -+{ /* Task 2 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab3[]= -+{ /* Task 3 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab4[]= -+{ /* Task 4 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab5[]= -+{ /* Task 5 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab6[]= -+{ /* Task 6 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab7[]= -+{ /* Task 7 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab8[]= -+{ /* Task 8 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab9[]= -+{ /* Task 9 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab10[]= -+{ /* Task 10 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab11[]= -+{ /* Task 11 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab12[]= -+{ /* Task 12 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab13[]= -+{ /* Task 13 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab14[]= -+{ /* Task 14 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_varTab15[]= -+{ /* Task 15 Variable Table */ -+ 0x00000000, /* var[0] */ -+ 0x00000000, /* var[1] */ -+ 0x00000000, /* var[2] */ -+ 0x00000000, /* var[3] */ -+ 0x00000000, /* var[4] */ -+ 0x00000000, /* var[5] */ -+ 0x00000000, /* var[6] */ -+ 0x00000000, /* var[7] */ -+ 0x00000000, /* var[8] */ -+ 0x00000000, /* var[9] */ -+ 0x00000000, /* var[10] */ -+ 0x00000000, /* var[11] */ -+ 0x00000000, /* var[12] */ -+ 0x00000000, /* var[13] */ -+ 0x00000000, /* var[14] */ -+ 0x00000000, /* var[15] */ -+ 0x00000000, /* var[16] */ -+ 0x00000000, /* var[17] */ -+ 0x00000000, /* var[18] */ -+ 0x00000000, /* var[19] */ -+ 0x00000000, /* var[20] */ -+ 0x00000000, /* var[21] */ -+ 0x00000000, /* var[22] */ -+ 0x00000000, /* var[23] */ -+ 0xe0000000, /* inc[0] */ -+ 0x20000000, /* inc[1] */ -+ 0x2000ffff, /* inc[2] */ -+ 0x00000000, /* inc[3] */ -+ 0x00000000, /* inc[4] */ -+ 0x00000000, /* inc[5] */ -+ 0x00000000, /* inc[6] */ -+ 0x00000000, /* inc[7] */ -+}; -+ -+u32 MCD_funcDescTab0[]= -+{ /* Task 0 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+#ifdef MCD_INCLUDE_EU -+u32 MCD_funcDescTab1[]= -+{ /* Task 1 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab2[]= -+{ /* Task 2 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab3[]= -+{ /* Task 3 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab4[]= -+{ /* Task 4 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab5[]= -+{ /* Task 5 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab6[]= -+{ /* Task 6 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab7[]= -+{ /* Task 7 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab8[]= -+{ /* Task 8 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab9[]= -+{ /* Task 9 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab10[]= -+{ /* Task 10 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab11[]= -+{ /* Task 11 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab12[]= -+{ /* Task 12 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab13[]= -+{ /* Task 13 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab14[]= -+{ /* Task 14 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+ -+u32 MCD_funcDescTab15[]= -+{ /* Task 15 Function Descriptor Table */ -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0xa0045670, /* mainFunc(), EU# 3 */ -+ 0xa0000000, /* rsduFunc(), EU# 3 */ -+ 0xa0000000, /* crcAccumVal(), EU# 3 */ -+ 0x20000000, /* setCrcAccum(), EU# 3 */ -+ 0x21800000, /* and(), EU# 3 */ -+ 0x21e00000, /* or(), EU# 3 */ -+ 0x20400000, /* add(), EU# 3 */ -+ 0x20500000, /* sub(), EU# 3 */ -+ 0x205a0000, /* andNot(), EU# 3 */ -+ 0x20a00000, /* shiftR(), EU# 3 */ -+ 0x202fa000, /* andReadyBit(), EU# 3 */ -+ 0x202f9000, /* andNotReadyBit(), EU# 3 */ -+ 0x202ea000, /* andWrapBit(), EU# 3 */ -+ 0x202da000, /* andLastBit(), EU# 3 */ -+ 0x202e2000, /* andInterruptBit(), EU# 3 */ -+ 0x202f2000, /* andCrcRestartBit(), EU# 3 */ -+}; -+#endif /*MCD_INCLUDE_EU*/ -+ -+u32 MCD_contextSave0[128]; /* Task 0 context save space */ -+u32 MCD_contextSave1[128]; /* Task 1 context save space */ -+u32 MCD_contextSave2[128]; /* Task 2 context save space */ -+u32 MCD_contextSave3[128]; /* Task 3 context save space */ -+u32 MCD_contextSave4[128]; /* Task 4 context save space */ -+u32 MCD_contextSave5[128]; /* Task 5 context save space */ -+u32 MCD_contextSave6[128]; /* Task 6 context save space */ -+u32 MCD_contextSave7[128]; /* Task 7 context save space */ -+u32 MCD_contextSave8[128]; /* Task 8 context save space */ -+u32 MCD_contextSave9[128]; /* Task 9 context save space */ -+u32 MCD_contextSave10[128]; /* Task 10 context save space */ -+u32 MCD_contextSave11[128]; /* Task 11 context save space */ -+u32 MCD_contextSave12[128]; /* Task 12 context save space */ -+u32 MCD_contextSave13[128]; /* Task 13 context save space */ -+u32 MCD_contextSave14[128]; /* Task 14 context save space */ -+u32 MCD_contextSave15[128]; /* Task 15 context save space */ -+ -+u32 MCD_ChainNoEu_TDT[]; -+u32 MCD_SingleNoEu_TDT[]; -+#ifdef MCD_INCLUDE_EU -+u32 MCD_ChainEu_TDT[]; -+u32 MCD_SingleEu_TDT[]; -+#endif -+u32 MCD_ENetRcv_TDT[]; -+u32 MCD_ENetXmit_TDT[]; -+ -+u32 MCD_modelTaskTableSrc[]= -+{ -+ (u32)MCD_ChainNoEu_TDT, -+ (u32)&((u8*)MCD_ChainNoEu_TDT)[0x0000016c], -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_SingleNoEu_TDT, -+ (u32)&((u8*)MCD_SingleNoEu_TDT)[0x000000d4], -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+#ifdef MCD_INCLUDE_EU -+ (u32)MCD_ChainEu_TDT, -+ (u32)&((u8*)MCD_ChainEu_TDT)[0x000001b4], -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_SingleEu_TDT, -+ (u32)&((u8*)MCD_SingleEu_TDT)[0x00000124], -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+#endif -+ (u32)MCD_ENetRcv_TDT, -+ (u32)&((u8*)MCD_ENetRcv_TDT)[0x000000a4], -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ (u32)MCD_ENetXmit_TDT, -+ (u32)&((u8*)MCD_ENetXmit_TDT)[0x000000d0], -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+}; -+u32 MCD_ChainNoEu_TDT[]= -+{ -+ 0x80004000, /* 0000(:370): LCDEXT: idx0 = 0x00000000; ; */ -+ 0x8118801b, /* 0004(:370): LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */ -+ 0xb8c60018, /* 0008(:371): LCD: idx2 = *(idx1 + var12); idx2 once var0; idx2 += inc3 */ -+ 0x10002b10, /* 000C(:372): DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x7000000d, /* 0010(:373): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ -+ 0x018cf89f, /* 0014(:373): DRD2B1: var6 = EU3(); EU3(idx2) */ -+ 0x6000000a, /* 0018(:374): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ -+ 0x080cf89f, /* 001C(:374): DRD2B1: idx0 = EU3(); EU3(idx2) */ -+ 0x000001f8, /* 0020(:0): NOP */ -+ 0x98180364, /* 0024(:378): LCD: idx0 = idx0; idx0 == var13; idx0 += inc4 */ -+ 0x8118801b, /* 0028(:380): LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */ -+ 0xf8c6001a, /* 002C(:381): LCDEXT: idx2 = *(idx1 + var12 + 8); idx2 once var0; idx2 += inc3 */ -+ 0xb8c6601b, /* 0030(:382): LCD: idx3 = *(idx1 + var12 + 12); ; idx3 += inc3 */ -+ 0x10002710, /* 0034(:384): DRD1A: var9 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x00000f18, /* 0038(:385): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -+ 0xb8c6001d, /* 003C(:387): LCD: idx2 = *(idx1 + var12 + 20); idx2 once var0; idx2 += inc3 */ -+ 0x10001310, /* 0040(:388): DRD1A: var4 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x60000007, /* 0044(:389): DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */ -+ 0x014cf88b, /* 0048(:389): DRD2B1: var5 = EU3(); EU3(idx2,var11) */ -+ 0x98c6001c, /* 004C(:391): LCD: idx2 = idx1 + var12 + 4; idx2 once var0; idx2 += inc3 */ -+ 0x00000710, /* 0050(:392): DRD1A: var1 = idx2; FN=0 init=0 WS=0 RS=0 */ -+ 0x98c70018, /* 0054(:393): LCD: idx2 = idx1 + var14; idx2 once var0; idx2 += inc3 */ -+ 0x10001f10, /* 0058(:394): DRD1A: var7 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x0000c818, /* 005C(:395): DRD1A: *idx2 = var3; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 0060(:0): NOP */ -+ 0xc1476018, /* 0064(:399): LCDEXT: idx1 = var2 + var14; ; idx1 += inc3 */ -+ 0xc003231d, /* 0068(:399): LCDEXT: idx2 = var0, idx3 = var6; idx3 == var12; idx2 += inc3, idx3 += inc5 */ -+ 0x811a601b, /* 006C(:400): LCD: idx4 = var2; ; idx4 += inc3 */ -+ 0xc1862102, /* 0070(:403): LCDEXT: idx5 = var3, idx6 = var12; idx6 < var4; idx5 += inc0, idx6 += inc2 */ -+ 0x849be009, /* 0074(:403): LCD: idx7 = var9; ; idx7 += inc1 */ -+ 0x03fed7b8, /* 0078(:406): DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */ -+ 0xda9b001b, /* 007C(:408): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 0080(:408): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x1000cb20, /* 0084(:409): DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 0088(:410): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88f, /* 008C(:410): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ -+ 0x1000cb28, /* 0090(:411): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 0094(:412): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88f, /* 0098(:412): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ -+ 0x1000cb30, /* 009C(:413): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00A0(:414): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88f, /* 00A4(:414): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ -+ 0x1000cb38, /* 00A8(:415): DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x0000c728, /* 00AC(:416): DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 00B0(:0): NOP */ -+ 0xc1476018, /* 00B4(:420): LCDEXT: idx1 = var2 + var14; ; idx1 += inc3 */ -+ 0xc003241d, /* 00B8(:420): LCDEXT: idx2 = var0, idx3 = var6; idx3 == var16; idx2 += inc3, idx3 += inc5 */ -+ 0x811a601b, /* 00BC(:421): LCD: idx4 = var2; ; idx4 += inc3 */ -+ 0xda9b001b, /* 00C0(:424): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 00C4(:424): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x0000d3a0, /* 00C8(:425): DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */ -+ 0xc1862102, /* 00CC(:427): LCDEXT: idx5 = var3, idx6 = var12; idx6 < var4; idx5 += inc0, idx6 += inc2 */ -+ 0x849be009, /* 00D0(:427): LCD: idx7 = var9; ; idx7 += inc1 */ -+ 0x0bfed7b8, /* 00D4(:430): DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */ -+ 0xda9b001b, /* 00D8(:432): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 00DC(:432): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x1000cb20, /* 00E0(:433): DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00E4(:434): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88f, /* 00E8(:434): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ -+ 0x1000cb28, /* 00EC(:435): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00F0(:436): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88f, /* 00F4(:436): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ -+ 0x1000cb30, /* 00F8(:437): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00FC(:438): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88f, /* 0100(:438): DRD2B1: idx2 = EU3(); EU3(idx2,var15) */ -+ 0x1000cb38, /* 0104(:439): DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x0000c728, /* 0108(:440): DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 010C(:0): NOP */ -+ 0x8118801b, /* 0110(:444): LCD: idx1 = var2; idx1 once var0; idx1 += inc3 */ -+ 0xd8c60018, /* 0114(:446): LCDEXT: idx2 = idx1 + var12; idx2 once var0; idx2 += inc3 */ -+ 0x98c6601c, /* 0118(:446): LCD: idx3 = idx1 + var12 + 4; ; idx3 += inc3 */ -+ 0x6000000b, /* 011C(:447): DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */ -+ 0x0c8cfc9f, /* 0120(:447): DRD2B1: *idx2 = EU3(); EU3(*idx2) */ -+ 0x000001f8, /* 0124(:0): NOP */ -+ 0xa146001e, /* 0128(:450): LCD: idx1 = *(var2 + var12 + 24); idx1 once var0; idx1 += inc3 */ -+ 0x10000b08, /* 012C(:451): DRD1A: var2 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x10002050, /* 0130(:452): DRD1A: var8 = var10; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0xb8c60018, /* 0134(:453): LCD: idx2 = *(idx1 + var12); idx2 once var0; idx2 += inc3 */ -+ 0x10002b10, /* 0138(:454): DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x7000000a, /* 013C(:455): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT MORE init=0 WS=0 RS=0 */ -+ 0x080cf89f, /* 0140(:455): DRD2B1: idx0 = EU3(); EU3(idx2) */ -+ 0x6000000d, /* 0144(:456): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */ -+ 0x018cf89f, /* 0148(:456): DRD2B1: var6 = EU3(); EU3(idx2) */ -+ 0x000001f8, /* 014C(:0): NOP */ -+ 0x8618801b, /* 0150(:462): LCD: idx1 = var12; idx1 once var0; idx1 += inc3 */ -+ 0x7000000e, /* 0154(:463): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */ -+ 0x084cf21f, /* 0158(:463): DRD2B1: idx1 = EU3(); EU3(var8) */ -+ 0xd8990336, /* 015C(:464): LCDEXT: idx2 = idx1; idx2 > var12; idx2 += inc6 */ -+ 0x8019801b, /* 0160(:464): LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */ -+ 0x040001f8, /* 0164(:465): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 0168(:0): NOP */ -+ 0x000001f8, /* 016C(:0): NOP */ -+}; -+u32 MCD_SingleNoEu_TDT[]= -+{ -+ 0x8198001b, /* 0000(:657): LCD: idx0 = var3; idx0 once var0; idx0 += inc3 */ -+ 0x7000000d, /* 0004(:658): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ -+ 0x080cf81f, /* 0008(:658): DRD2B1: idx0 = EU3(); EU3(idx0) */ -+ 0x8198801b, /* 000C(:659): LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */ -+ 0x6000000e, /* 0010(:660): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */ -+ 0x084cf85f, /* 0014(:660): DRD2B1: idx1 = EU3(); EU3(idx1) */ -+ 0x000001f8, /* 0018(:0): NOP */ -+ 0x8298001b, /* 001C(:664): LCD: idx0 = var5; idx0 once var0; idx0 += inc3 */ -+ 0x7000000d, /* 0020(:665): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ -+ 0x010cf81f, /* 0024(:665): DRD2B1: var4 = EU3(); EU3(idx0) */ -+ 0x6000000e, /* 0028(:666): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */ -+ 0x018cf81f, /* 002C(:666): DRD2B1: var6 = EU3(); EU3(idx0) */ -+ 0xc202601b, /* 0030(:669): LCDEXT: idx0 = var4, idx1 = var4; ; idx0 += inc3, idx1 += inc3 */ -+ 0xc002221c, /* 0034(:669): LCDEXT: idx2 = var0, idx3 = var4; idx3 == var8; idx2 += inc3, idx3 += inc4 */ -+ 0x809a601b, /* 0038(:670): LCD: idx4 = var1; ; idx4 += inc3 */ -+ 0xc10420c2, /* 003C(:673): LCDEXT: idx5 = var2, idx6 = var8; idx6 < var3; idx5 += inc0, idx6 += inc2 */ -+ 0x839be009, /* 0040(:673): LCD: idx7 = var7; ; idx7 += inc1 */ -+ 0x03fed7b8, /* 0044(:676): DRD1A: *idx7; FN=0 init=31 WS=3 RS=3 */ -+ 0xda9b001b, /* 0048(:678): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 004C(:678): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x70000006, /* 0050(:680): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf889, /* 0054(:680): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ -+ 0x1000cb28, /* 0058(:681): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 005C(:682): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf889, /* 0060(:682): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ -+ 0x1000cb30, /* 0064(:683): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 0068(:684): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf889, /* 006C(:684): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ -+ 0x0000cb38, /* 0070(:685): DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 0074(:0): NOP */ -+ 0xc202601b, /* 0078(:689): LCDEXT: idx0 = var4, idx1 = var4; ; idx0 += inc3, idx1 += inc3 */ -+ 0xc002229c, /* 007C(:689): LCDEXT: idx2 = var0, idx3 = var4; idx3 == var10; idx2 += inc3, idx3 += inc4 */ -+ 0x809a601b, /* 0080(:690): LCD: idx4 = var1; ; idx4 += inc3 */ -+ 0xda9b001b, /* 0084(:693): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 0088(:693): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x0000d3a0, /* 008C(:694): DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */ -+ 0xc10420c2, /* 0090(:696): LCDEXT: idx5 = var2, idx6 = var8; idx6 < var3; idx5 += inc0, idx6 += inc2 */ -+ 0x839be009, /* 0094(:696): LCD: idx7 = var7; ; idx7 += inc1 */ -+ 0x0bfed7b8, /* 0098(:699): DRD1A: *idx7; FN=0 TFD init=31 WS=3 RS=3 */ -+ 0xda9b001b, /* 009C(:701): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 00A0(:701): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x70000006, /* 00A4(:703): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf889, /* 00A8(:703): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ -+ 0x1000cb28, /* 00AC(:704): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00B0(:705): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf889, /* 00B4(:705): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ -+ 0x1000cb30, /* 00B8(:706): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00BC(:707): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf889, /* 00C0(:707): DRD2B1: idx2 = EU3(); EU3(idx2,var9) */ -+ 0x0000cb38, /* 00C4(:708): DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 00C8(:0): NOP */ -+ 0xc318022d, /* 00CC(:712): LCDEXT: idx0 = var6; idx0 > var8; idx0 += inc5 */ -+ 0x8018801b, /* 00D0(:712): LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */ -+ 0x040001f8, /* 00D4(:713): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ -+}; -+#ifdef MCD_INCLUDE_EU -+u32 MCD_ChainEu_TDT[]= -+{ -+ 0x80004000, /* 0000(:947): LCDEXT: idx0 = 0x00000000; ; */ -+ 0x8198801b, /* 0004(:947): LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */ -+ 0xb8c68018, /* 0008(:948): LCD: idx2 = *(idx1 + var13); idx2 once var0; idx2 += inc3 */ -+ 0x10002f10, /* 000C(:949): DRD1A: var11 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x7000000d, /* 0010(:950): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ -+ 0x01ccf89f, /* 0014(:950): DRD2B1: var7 = EU3(); EU3(idx2) */ -+ 0x6000000a, /* 0018(:951): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ -+ 0x080cf89f, /* 001C(:951): DRD2B1: idx0 = EU3(); EU3(idx2) */ -+ 0x000001f8, /* 0020(:0): NOP */ -+ 0x981803a4, /* 0024(:955): LCD: idx0 = idx0; idx0 == var14; idx0 += inc4 */ -+ 0x8198801b, /* 0028(:957): LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */ -+ 0xf8c6801a, /* 002C(:958): LCDEXT: idx2 = *(idx1 + var13 + 8); idx2 once var0; idx2 += inc3 */ -+ 0xb8c6e01b, /* 0030(:959): LCD: idx3 = *(idx1 + var13 + 12); ; idx3 += inc3 */ -+ 0x10002b10, /* 0034(:961): DRD1A: var10 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x00001318, /* 0038(:962): DRD1A: var4 = idx3; FN=0 init=0 WS=0 RS=0 */ -+ 0xb8c6801d, /* 003C(:964): LCD: idx2 = *(idx1 + var13 + 20); idx2 once var0; idx2 += inc3 */ -+ 0x10001710, /* 0040(:965): DRD1A: var5 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x60000007, /* 0044(:966): DRD2A: EU0=0 EU1=0 EU2=0 EU3=7 EXT init=0 WS=0 RS=0 */ -+ 0x018cf88c, /* 0048(:966): DRD2B1: var6 = EU3(); EU3(idx2,var12) */ -+ 0x98c6801c, /* 004C(:968): LCD: idx2 = idx1 + var13 + 4; idx2 once var0; idx2 += inc3 */ -+ 0x00000b10, /* 0050(:969): DRD1A: var2 = idx2; FN=0 init=0 WS=0 RS=0 */ -+ 0x98c78018, /* 0054(:970): LCD: idx2 = idx1 + var15; idx2 once var0; idx2 += inc3 */ -+ 0x10002310, /* 0058(:971): DRD1A: var8 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x0000c820, /* 005C(:972): DRD1A: *idx2 = var4; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 0060(:0): NOP */ -+ 0x8698801b, /* 0064(:976): LCD: idx1 = var13; idx1 once var0; idx1 += inc3 */ -+ 0x7000000f, /* 0068(:977): DRD2A: EU0=0 EU1=0 EU2=0 EU3=15 EXT MORE init=0 WS=0 RS=0 */ -+ 0x084cf2df, /* 006C(:977): DRD2B1: idx1 = EU3(); EU3(var11) */ -+ 0xd899042d, /* 0070(:978): LCDEXT: idx2 = idx1; idx2 >= var16; idx2 += inc5 */ -+ 0x8019801b, /* 0074(:978): LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */ -+ 0x60000003, /* 0078(:979): DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ -+ 0x2cd7c7df, /* 007C(:979): DRD2B2: EU3(var13) */ -+ 0xd8990364, /* 0080(:980): LCDEXT: idx2 = idx1; idx2 == var13; idx2 += inc4 */ -+ 0x8019801b, /* 0084(:980): LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */ -+ 0x60000003, /* 0088(:981): DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ -+ 0x2c17c7df, /* 008C(:981): DRD2B2: EU3(var1) */ -+ 0x000001f8, /* 0090(:0): NOP */ -+ 0xc1c7e018, /* 0094(:984): LCDEXT: idx1 = var3 + var15; ; idx1 += inc3 */ -+ 0xc003a35e, /* 0098(:984): LCDEXT: idx2 = var0, idx3 = var7; idx3 == var13; idx2 += inc3, idx3 += inc6 */ -+ 0x819a601b, /* 009C(:985): LCD: idx4 = var3; ; idx4 += inc3 */ -+ 0xc206a142, /* 00A0(:988): LCDEXT: idx5 = var4, idx6 = var13; idx6 < var5; idx5 += inc0, idx6 += inc2 */ -+ 0x851be009, /* 00A4(:988): LCD: idx7 = var10; ; idx7 += inc1 */ -+ 0x63fe0000, /* 00A8(:991): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */ -+ 0x0d4cfddf, /* 00AC(:991): DRD2B1: *idx5 = EU3(); EU3(*idx7) */ -+ 0xda9b001b, /* 00B0(:993): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 00B4(:993): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x70000002, /* 00B8(:994): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ -+ 0x004cf81f, /* 00BC(:994): DRD2B1: var1 = EU3(); EU3(idx0) */ -+ 0x1000cb20, /* 00C0(:995): DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00C4(:996): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf891, /* 00C8(:996): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ -+ 0x1000cb28, /* 00CC(:997): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00D0(:998): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf891, /* 00D4(:998): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ -+ 0x1000cb30, /* 00D8(:999): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00DC(:1000): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf891, /* 00E0(:1000): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ -+ 0x1000cb38, /* 00E4(:1001): DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x0000c728, /* 00E8(:1002): DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 00EC(:0): NOP */ -+ 0xc1c7e018, /* 00F0(:1006): LCDEXT: idx1 = var3 + var15; ; idx1 += inc3 */ -+ 0xc003a49e, /* 00F4(:1006): LCDEXT: idx2 = var0, idx3 = var7; idx3 == var18; idx2 += inc3, idx3 += inc6 */ -+ 0x819a601b, /* 00F8(:1007): LCD: idx4 = var3; ; idx4 += inc3 */ -+ 0xda9b001b, /* 00FC(:1010): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 0100(:1010): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x0000d3a0, /* 0104(:1011): DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */ -+ 0xc206a142, /* 0108(:1013): LCDEXT: idx5 = var4, idx6 = var13; idx6 < var5; idx5 += inc0, idx6 += inc2 */ -+ 0x851be009, /* 010C(:1013): LCD: idx7 = var10; ; idx7 += inc1 */ -+ 0x6bfe0000, /* 0110(:1016): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */ -+ 0x0d4cfddf, /* 0114(:1016): DRD2B1: *idx5 = EU3(); EU3(*idx7) */ -+ 0xda9b001b, /* 0118(:1018): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 011C(:1018): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x70000002, /* 0120(:1019): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ -+ 0x004cf81f, /* 0124(:1019): DRD2B1: var1 = EU3(); EU3(idx0) */ -+ 0x1000cb20, /* 0128(:1020): DRD1A: *idx2 = idx4; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 012C(:1021): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf891, /* 0130(:1021): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ -+ 0x1000cb28, /* 0134(:1022): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 0138(:1023): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf891, /* 013C(:1023): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ -+ 0x1000cb30, /* 0140(:1024): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 0144(:1025): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf891, /* 0148(:1025): DRD2B1: idx2 = EU3(); EU3(idx2,var17) */ -+ 0x1000cb38, /* 014C(:1026): DRD1A: *idx2 = idx7; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x0000c728, /* 0150(:1027): DRD1A: *idx1 = idx5; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 0154(:0): NOP */ -+ 0x8198801b, /* 0158(:1031): LCD: idx1 = var3; idx1 once var0; idx1 += inc3 */ -+ 0xd8c68018, /* 015C(:1033): LCDEXT: idx2 = idx1 + var13; idx2 once var0; idx2 += inc3 */ -+ 0x98c6e01c, /* 0160(:1033): LCD: idx3 = idx1 + var13 + 4; ; idx3 += inc3 */ -+ 0x6000000b, /* 0164(:1034): DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */ -+ 0x0c8cfc9f, /* 0168(:1034): DRD2B1: *idx2 = EU3(); EU3(*idx2) */ -+ 0x0000cc08, /* 016C(:1035): DRD1A: *idx3 = var1; FN=0 init=0 WS=0 RS=0 */ -+ 0xa1c6801e, /* 0170(:1038): LCD: idx1 = *(var3 + var13 + 24); idx1 once var0; idx1 += inc3 */ -+ 0x10000f08, /* 0174(:1039): DRD1A: var3 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x10002458, /* 0178(:1040): DRD1A: var9 = var11; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0xb8c68018, /* 017C(:1041): LCD: idx2 = *(idx1 + var13); idx2 once var0; idx2 += inc3 */ -+ 0x10002f10, /* 0180(:1042): DRD1A: var11 = idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x7000000a, /* 0184(:1043): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT MORE init=0 WS=0 RS=0 */ -+ 0x080cf89f, /* 0188(:1043): DRD2B1: idx0 = EU3(); EU3(idx2) */ -+ 0x6000000d, /* 018C(:1044): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT init=0 WS=0 RS=0 */ -+ 0x01ccf89f, /* 0190(:1044): DRD2B1: var7 = EU3(); EU3(idx2) */ -+ 0x000001f8, /* 0194(:0): NOP */ -+ 0x8698801b, /* 0198(:1050): LCD: idx1 = var13; idx1 once var0; idx1 += inc3 */ -+ 0x7000000e, /* 019C(:1051): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */ -+ 0x084cf25f, /* 01A0(:1051): DRD2B1: idx1 = EU3(); EU3(var9) */ -+ 0xd899037f, /* 01A4(:1052): LCDEXT: idx2 = idx1; idx2 > var13; idx2 += inc7 */ -+ 0x8019801b, /* 01A8(:1052): LCD: idx3 = var0; idx3 once var0; idx3 += inc3 */ -+ 0x040001f8, /* 01AC(:1053): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 01B0(:0): NOP */ -+ 0x000001f8, /* 01B4(:0): NOP */ -+}; -+u32 MCD_SingleEu_TDT[]= -+{ -+ 0x8218001b, /* 0000(:1248): LCD: idx0 = var4; idx0 once var0; idx0 += inc3 */ -+ 0x7000000d, /* 0004(:1249): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ -+ 0x080cf81f, /* 0008(:1249): DRD2B1: idx0 = EU3(); EU3(idx0) */ -+ 0x8218801b, /* 000C(:1250): LCD: idx1 = var4; idx1 once var0; idx1 += inc3 */ -+ 0x6000000e, /* 0010(:1251): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */ -+ 0x084cf85f, /* 0014(:1251): DRD2B1: idx1 = EU3(); EU3(idx1) */ -+ 0x000001f8, /* 0018(:0): NOP */ -+ 0x8318001b, /* 001C(:1255): LCD: idx0 = var6; idx0 once var0; idx0 += inc3 */ -+ 0x7000000d, /* 0020(:1256): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ -+ 0x014cf81f, /* 0024(:1256): DRD2B1: var5 = EU3(); EU3(idx0) */ -+ 0x6000000e, /* 0028(:1257): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT init=0 WS=0 RS=0 */ -+ 0x01ccf81f, /* 002C(:1257): DRD2B1: var7 = EU3(); EU3(idx0) */ -+ 0x8498001b, /* 0030(:1260): LCD: idx0 = var9; idx0 once var0; idx0 += inc3 */ -+ 0x7000000f, /* 0034(:1261): DRD2A: EU0=0 EU1=0 EU2=0 EU3=15 EXT MORE init=0 WS=0 RS=0 */ -+ 0x080cf19f, /* 0038(:1261): DRD2B1: idx0 = EU3(); EU3(var6) */ -+ 0xd81882a4, /* 003C(:1262): LCDEXT: idx1 = idx0; idx1 >= var10; idx1 += inc4 */ -+ 0x8019001b, /* 0040(:1262): LCD: idx2 = var0; idx2 once var0; idx2 += inc3 */ -+ 0x60000003, /* 0044(:1263): DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ -+ 0x2c97c7df, /* 0048(:1263): DRD2B2: EU3(var9) */ -+ 0xd818826d, /* 004C(:1264): LCDEXT: idx1 = idx0; idx1 == var9; idx1 += inc5 */ -+ 0x8019001b, /* 0050(:1264): LCD: idx2 = var0; idx2 once var0; idx2 += inc3 */ -+ 0x60000003, /* 0054(:1265): DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ -+ 0x2c17c7df, /* 0058(:1265): DRD2B2: EU3(var1) */ -+ 0x000001f8, /* 005C(:0): NOP */ -+ 0xc282e01b, /* 0060(:1268): LCDEXT: idx0 = var5, idx1 = var5; ; idx0 += inc3, idx1 += inc3 */ -+ 0xc002a25e, /* 0064(:1268): LCDEXT: idx2 = var0, idx3 = var5; idx3 == var9; idx2 += inc3, idx3 += inc6 */ -+ 0x811a601b, /* 0068(:1269): LCD: idx4 = var2; ; idx4 += inc3 */ -+ 0xc184a102, /* 006C(:1272): LCDEXT: idx5 = var3, idx6 = var9; idx6 < var4; idx5 += inc0, idx6 += inc2 */ -+ 0x841be009, /* 0070(:1272): LCD: idx7 = var8; ; idx7 += inc1 */ -+ 0x63fe0000, /* 0074(:1275): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=31 WS=3 RS=3 */ -+ 0x0d4cfddf, /* 0078(:1275): DRD2B1: *idx5 = EU3(); EU3(*idx7) */ -+ 0xda9b001b, /* 007C(:1277): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 0080(:1277): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x70000002, /* 0084(:1279): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ -+ 0x004cf99f, /* 0088(:1279): DRD2B1: var1 = EU3(); EU3(idx6) */ -+ 0x70000006, /* 008C(:1280): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88b, /* 0090(:1280): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ -+ 0x1000cb28, /* 0094(:1281): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 0098(:1282): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88b, /* 009C(:1282): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ -+ 0x1000cb30, /* 00A0(:1283): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00A4(:1284): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88b, /* 00A8(:1284): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ -+ 0x0000cb38, /* 00AC(:1285): DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 00B0(:0): NOP */ -+ 0xc282e01b, /* 00B4(:1289): LCDEXT: idx0 = var5, idx1 = var5; ; idx0 += inc3, idx1 += inc3 */ -+ 0xc002a31e, /* 00B8(:1289): LCDEXT: idx2 = var0, idx3 = var5; idx3 == var12; idx2 += inc3, idx3 += inc6 */ -+ 0x811a601b, /* 00BC(:1290): LCD: idx4 = var2; ; idx4 += inc3 */ -+ 0xda9b001b, /* 00C0(:1293): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 00C4(:1293): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x0000d3a0, /* 00C8(:1294): DRD1A: *idx4; FN=0 init=0 WS=0 RS=0 */ -+ 0xc184a102, /* 00CC(:1296): LCDEXT: idx5 = var3, idx6 = var9; idx6 < var4; idx5 += inc0, idx6 += inc2 */ -+ 0x841be009, /* 00D0(:1296): LCD: idx7 = var8; ; idx7 += inc1 */ -+ 0x6bfe0000, /* 00D4(:1299): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 TFD EXT init=31 WS=3 RS=3 */ -+ 0x0d4cfddf, /* 00D8(:1299): DRD2B1: *idx5 = EU3(); EU3(*idx7) */ -+ 0xda9b001b, /* 00DC(:1301): LCDEXT: idx5 = idx5, idx6 = idx6; idx5 once var0; idx5 += inc3, idx6 += inc3 */ -+ 0x9b9be01b, /* 00E0(:1301): LCD: idx7 = idx7; ; idx7 += inc3 */ -+ 0x70000002, /* 00E4(:1303): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ -+ 0x004cf99f, /* 00E8(:1303): DRD2B1: var1 = EU3(); EU3(idx6) */ -+ 0x70000006, /* 00EC(:1304): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88b, /* 00F0(:1304): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ -+ 0x1000cb28, /* 00F4(:1305): DRD1A: *idx2 = idx5; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 00F8(:1306): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88b, /* 00FC(:1306): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ -+ 0x1000cb30, /* 0100(:1307): DRD1A: *idx2 = idx6; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x70000006, /* 0104(:1308): DRD2A: EU0=0 EU1=0 EU2=0 EU3=6 EXT MORE init=0 WS=0 RS=0 */ -+ 0x088cf88b, /* 0108(:1308): DRD2B1: idx2 = EU3(); EU3(idx2,var11) */ -+ 0x0000cb38, /* 010C(:1309): DRD1A: *idx2 = idx7; FN=0 init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 0110(:0): NOP */ -+ 0x8144801c, /* 0114(:1312): LCD: idx0 = var2 + var9 + 4; idx0 once var0; idx0 += inc3 */ -+ 0x0000c008, /* 0118(:1313): DRD1A: *idx0 = var1; FN=0 init=0 WS=0 RS=0 */ -+ 0xc398027f, /* 011C(:1315): LCDEXT: idx0 = var7; idx0 > var9; idx0 += inc7 */ -+ 0x8018801b, /* 0120(:1315): LCD: idx1 = var0; idx1 once var0; idx1 += inc3 */ -+ 0x040001f8, /* 0124(:1316): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ -+}; -+#endif -+u32 MCD_ENetRcv_TDT[]= -+{ -+ 0x80004000, /* 0000(:1389): LCDEXT: idx0 = 0x00000000; ; */ -+ 0x81988000, /* 0004(:1389): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -+ 0x10000788, /* 0008(:1390): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x6000000a, /* 000C(:1391): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ -+ 0x080cf05f, /* 0010(:1391): DRD2B1: idx0 = EU3(); EU3(var1) */ -+ 0x98180209, /* 0014(:1394): LCD: idx0 = idx0; idx0 != var8; idx0 += inc1 */ -+ 0x81c40004, /* 0018(:1396): LCD: idx1 = var3 + var8 + 4; idx1 once var0; idx1 += inc0 */ -+ 0x7000000e, /* 001C(:1397): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */ -+ 0x010cf05f, /* 0020(:1397): DRD2B1: var4 = EU3(); EU3(var1) */ -+ 0x7000000c, /* 0024(:1398): DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */ -+ 0x01ccf05f, /* 0028(:1398): DRD2B1: var7 = EU3(); EU3(var1) */ -+ 0x70000004, /* 002C(:1399): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */ -+ 0x014cf049, /* 0030(:1399): DRD2B1: var5 = EU3(); EU3(var1,var9) */ -+ 0x70000004, /* 0034(:1400): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */ -+ 0x004cf04a, /* 0038(:1400): DRD2B1: var1 = EU3(); EU3(var1,var10) */ -+ 0x00000b88, /* 003C(:1403): DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */ -+ 0xc4030150, /* 0040(:1406): LCDEXT: idx1 = var8, idx2 = var6; idx1 < var5; idx1 += inc2, idx2 += inc0 */ -+ 0x8119e012, /* 0044(:1406): LCD: idx3 = var2; ; idx3 += inc2 */ -+ 0x03e0cf90, /* 0048(:1409): DRD1A: *idx3 = *idx2; FN=0 init=31 WS=0 RS=0 */ -+ 0x81188000, /* 004C(:1412): LCD: idx1 = var2; idx1 once var0; idx1 += inc0 */ -+ 0x000ac788, /* 0050(:1413): DRD1A: *idx1 = *idx1; FN=0 init=0 WS=1 RS=1 */ -+ 0xc4030000, /* 0054(:1415): LCDEXT: idx1 = var8, idx2 = var6; idx1 once var0; idx1 += inc0, idx2 += inc0 */ -+ 0x8199e000, /* 0058(:1415): LCD: idx3 = var3; ; idx3 += inc0 */ -+ 0x63e00004, /* 005C(:1418): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=31 WS=0 RS=0 */ -+ 0x084cfc8b, /* 0060(:1418): DRD2B1: idx1 = EU3(); EU3(*idx2,var11) */ -+ 0xd8990000, /* 0064(:1421): LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */ -+ 0x9999e000, /* 0068(:1421): LCD: idx3 = idx3; ; idx3 += inc0 */ -+ 0x60000005, /* 006C(:1422): DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ -+ 0x0cccf841, /* 0070(:1422): DRD2B1: *idx3 = EU3(); EU3(idx1,var1) */ -+ 0x81c60000, /* 0074(:1427): LCD: idx1 = var3 + var12; idx1 once var0; idx1 += inc0 */ -+ 0xc399021b, /* 0078(:1429): LCDEXT: idx2 = var7; idx2 > var8; idx2 += inc3 */ -+ 0x80198000, /* 007C(:1429): LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */ -+ 0x00008400, /* 0080(:1430): DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */ -+ 0x00000f08, /* 0084(:1431): DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */ -+ 0x81988000, /* 0088(:1434): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -+ 0x10000788, /* 008C(:1435): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x6000000a, /* 0090(:1436): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ -+ 0x080cf05f, /* 0094(:1436): DRD2B1: idx0 = EU3(); EU3(var1) */ -+ 0xc2188209, /* 0098(:1439): LCDEXT: idx1 = var4; idx1 != var8; idx1 += inc1 */ -+ 0x80190000, /* 009C(:1439): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -+ 0x040001f8, /* 00A0(:1440): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 00A4(:0): NOP */ -+}; -+u32 MCD_ENetXmit_TDT[]= -+{ -+ 0x80004000, /* 0000(:1515): LCDEXT: idx0 = 0x00000000; ; */ -+ 0x81988000, /* 0004(:1515): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -+ 0x10000788, /* 0008(:1516): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x6000000a, /* 000C(:1517): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ -+ 0x080cf05f, /* 0010(:1517): DRD2B1: idx0 = EU3(); EU3(var1) */ -+ 0x98180309, /* 0014(:1520): LCD: idx0 = idx0; idx0 != var12; idx0 += inc1 */ -+ 0x80004003, /* 0018(:1522): LCDEXT: idx1 = 0x00000003; ; */ -+ 0x81c60004, /* 001C(:1522): LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */ -+ 0x7000000e, /* 0020(:1523): DRD2A: EU0=0 EU1=0 EU2=0 EU3=14 EXT MORE init=0 WS=0 RS=0 */ -+ 0x014cf05f, /* 0024(:1523): DRD2B1: var5 = EU3(); EU3(var1) */ -+ 0x7000000c, /* 0028(:1524): DRD2A: EU0=0 EU1=0 EU2=0 EU3=12 EXT MORE init=0 WS=0 RS=0 */ -+ 0x028cf05f, /* 002C(:1524): DRD2B1: var10 = EU3(); EU3(var1) */ -+ 0x7000000d, /* 0030(:1525): DRD2A: EU0=0 EU1=0 EU2=0 EU3=13 EXT MORE init=0 WS=0 RS=0 */ -+ 0x018cf05f, /* 0034(:1525): DRD2B1: var6 = EU3(); EU3(var1) */ -+ 0x70000004, /* 0038(:1526): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT MORE init=0 WS=0 RS=0 */ -+ 0x01ccf04d, /* 003C(:1526): DRD2B1: var7 = EU3(); EU3(var1,var13) */ -+ 0x10000b90, /* 0040(:1527): DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x60000004, /* 0044(:1528): DRD2A: EU0=0 EU1=0 EU2=0 EU3=4 EXT init=0 WS=0 RS=0 */ -+ 0x020cf0a1, /* 0048(:1528): DRD2B1: var8 = EU3(); EU3(var2,idx1) */ -+ 0xc3188312, /* 004C(:1531): LCDEXT: idx1 = var6; idx1 > var12; idx1 += inc2 */ -+ 0x83c70000, /* 0050(:1531): LCD: idx2 = var7 + var14; idx2 once var0; idx2 += inc0 */ -+ 0x00001f10, /* 0054(:1532): DRD1A: var7 = idx2; FN=0 init=0 WS=0 RS=0 */ -+ 0xc583a3c3, /* 0058(:1534): LCDEXT: idx1 = var11, idx2 = var7; idx2 >= var15; idx1 += inc0, idx2 += inc3 */ -+ 0x81042325, /* 005C(:1534): LCD: idx3 = var2, idx4 = var8; idx4 == var12; idx3 += inc4, idx4 += inc5 */ -+ 0x03e0c798, /* 0060(:1539): DRD1A: *idx1 = *idx3; FN=0 init=31 WS=0 RS=0 */ -+ 0xd8990000, /* 0064(:1542): LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */ -+ 0x9999e000, /* 0068(:1542): LCD: idx3 = idx3; ; idx3 += inc0 */ -+ 0x000acf98, /* 006C(:1543): DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */ -+ 0xd8992306, /* 0070(:1545): LCDEXT: idx1 = idx1, idx2 = idx2; idx2 > var12; idx1 += inc0, idx2 += inc6 */ -+ 0x9999e03f, /* 0074(:1545): LCD: idx3 = idx3; ; idx3 += inc7 */ -+ 0x03eac798, /* 0078(:1548): DRD1A: *idx1 = *idx3; FN=0 init=31 WS=1 RS=1 */ -+ 0xd8990000, /* 007C(:1551): LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */ -+ 0x9999e000, /* 0080(:1551): LCD: idx3 = idx3; ; idx3 += inc0 */ -+ 0x000acf98, /* 0084(:1552): DRD1A: *idx3 = *idx3; FN=0 init=0 WS=1 RS=1 */ -+ 0xd8990000, /* 0088(:1554): LCDEXT: idx1 = idx1, idx2 = idx2; idx1 once var0; idx1 += inc0, idx2 += inc0 */ -+ 0x99832302, /* 008C(:1554): LCD: idx3 = idx3, idx4 = var6; idx4 > var12; idx3 += inc0, idx4 += inc2 */ -+ 0x0beac798, /* 0090(:1557): DRD1A: *idx1 = *idx3; FN=0 TFD init=31 WS=1 RS=1 */ -+ 0x81988000, /* 0094(:1559): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -+ 0x6000000b, /* 0098(:1560): DRD2A: EU0=0 EU1=0 EU2=0 EU3=11 EXT init=0 WS=0 RS=0 */ -+ 0x0c4cfc5f, /* 009C(:1560): DRD2B1: *idx1 = EU3(); EU3(*idx1) */ -+ 0x81c80000, /* 00A0(:1562): LCD: idx1 = var3 + var16; idx1 once var0; idx1 += inc0 */ -+ 0xc5190312, /* 00A4(:1564): LCDEXT: idx2 = var10; idx2 > var12; idx2 += inc2 */ -+ 0x80198000, /* 00A8(:1564): LCD: idx3 = var0; idx3 once var0; idx3 += inc0 */ -+ 0x00008400, /* 00AC(:1565): DRD1A: idx1 = var0; FN=0 init=0 WS=0 RS=0 */ -+ 0x00000f08, /* 00B0(:1566): DRD1A: var3 = idx1; FN=0 init=0 WS=0 RS=0 */ -+ 0x81988000, /* 00B4(:1569): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -+ 0x10000788, /* 00B8(:1570): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -+ 0x6000000a, /* 00BC(:1571): DRD2A: EU0=0 EU1=0 EU2=0 EU3=10 EXT init=0 WS=0 RS=0 */ -+ 0x080cf05f, /* 00C0(:1571): DRD2B1: idx0 = EU3(); EU3(var1) */ -+ 0xc2988309, /* 00C4(:1574): LCDEXT: idx1 = var5; idx1 != var12; idx1 += inc1 */ -+ 0x80190000, /* 00C8(:1574): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -+ 0x040001f8, /* 00CC(:1575): DRD1A: FN=0 INT init=0 WS=0 RS=0 */ -+ 0x000001f8, /* 00D0(:0): NOP */ -+}; -+ -+#ifdef MCD_INCLUDE_EU -+MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; -+#endif ---- /dev/null -+++ b/drivers/dma/MCD_tasksInit.c -@@ -0,0 +1,238 @@ -+/* -+ * drivers/dma/MCD_tasksInit.c -+ * -+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+/* -+ * Autogenerated - Do not edit! -+ */ -+ -+#include "MCD_dma.h" -+ -+extern dmaRegs *MCD_dmaBar; -+ -+ -+/* -+ * Task 0 -+ */ -+ -+void MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel) -+{ -+ -+ MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */ -+ MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ -+ MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ -+ MCD_SET_VAR(taskTable+channel, 11, (u32)xferSize); /* var[11] */ -+ MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ -+ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */ -+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ -+ MCD_SET_VAR(taskTable+channel, 3, (u32)0x00000000); /* var[3] */ -+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ -+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ -+ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */ -+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ -+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ -+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */ -+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */ -+ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000); /* var[12] */ -+ MCD_SET_VAR(taskTable+channel, 13, (u32)0x80000000); /* var[13] */ -+ MCD_SET_VAR(taskTable+channel, 14, (u32)0x00000010); /* var[14] */ -+ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004); /* var[15] */ -+ MCD_SET_VAR(taskTable+channel, 16, (u32)0x08000000); /* var[16] */ -+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */ -+ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000); /* inc[4] */ -+ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000001); /* inc[5] */ -+ MCD_SET_VAR(taskTable+channel, 30, (u32)0x40000000); /* inc[6] */ -+ -+ /* Set the task's Enable bit in its Task Control Register */ -+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; -+} -+ -+ -+/* -+ * Task 1 -+ */ -+ -+void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel) -+{ -+ -+ MCD_SET_VAR(taskTable+channel, 7, (u32)srcAddr); /* var[7] */ -+ MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ -+ MCD_SET_VAR(taskTable+channel, 2, (u32)destAddr); /* var[2] */ -+ MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ -+ MCD_SET_VAR(taskTable+channel, 3, (u32)dmaSize); /* var[3] */ -+ MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ -+ MCD_SET_VAR(taskTable+channel, 5, (u32)flags); /* var[5] */ -+ MCD_SET_VAR(taskTable+channel, 1, (u32)currBD); /* var[1] */ -+ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */ -+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ -+ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */ -+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ -+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000004); /* var[9] */ -+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x08000000); /* var[10] */ -+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */ -+ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000001); /* inc[4] */ -+ MCD_SET_VAR(taskTable+channel, 29, (u32)0x40000000); /* inc[5] */ -+ -+ /* Set the task's Enable bit in its Task Control Register */ -+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; -+} -+ -+ -+/* -+ * Task 2 -+ */ -+ -+void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel) -+{ -+ -+ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */ -+ MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ -+ MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ -+ MCD_SET_VAR(taskTable+channel, 12, (u32)xferSize); /* var[12] */ -+ MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ -+ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */ -+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ -+ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */ -+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ -+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ -+ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */ -+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ -+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ -+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */ -+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */ -+ MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000000); /* var[11] */ -+ MCD_SET_VAR(taskTable+channel, 13, (u32)0x00000000); /* var[13] */ -+ MCD_SET_VAR(taskTable+channel, 14, (u32)0x80000000); /* var[14] */ -+ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000010); /* var[15] */ -+ MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000001); /* var[16] */ -+ MCD_SET_VAR(taskTable+channel, 17, (u32)0x00000004); /* var[17] */ -+ MCD_SET_VAR(taskTable+channel, 18, (u32)0x08000000); /* var[18] */ -+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */ -+ MCD_SET_VAR(taskTable+channel, 28, (u32)0x80000000); /* inc[4] */ -+ MCD_SET_VAR(taskTable+channel, 29, (u32)0xc0000000); /* inc[5] */ -+ MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001); /* inc[6] */ -+ MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000); /* inc[7] */ -+ -+ /* Set the task's Enable bit in its Task Control Register */ -+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; -+} -+ -+ -+/* -+ * Task 3 -+ */ -+ -+void MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel) -+{ -+ -+ MCD_SET_VAR(taskTable+channel, 8, (u32)srcAddr); /* var[8] */ -+ MCD_SET_VAR(taskTable+channel, 25, (u32)(0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ -+ MCD_SET_VAR(taskTable+channel, 3, (u32)destAddr); /* var[3] */ -+ MCD_SET_VAR(taskTable+channel, 24, (u32)(0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ -+ MCD_SET_VAR(taskTable+channel, 4, (u32)dmaSize); /* var[4] */ -+ MCD_SET_VAR(taskTable+channel, 26, (u32)(0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ -+ MCD_SET_VAR(taskTable+channel, 6, (u32)flags); /* var[6] */ -+ MCD_SET_VAR(taskTable+channel, 2, (u32)currBD); /* var[2] */ -+ MCD_SET_VAR(taskTable+channel, 0, (u32)cSave); /* var[0] */ -+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ -+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ -+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ -+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */ -+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000001); /* var[10] */ -+ MCD_SET_VAR(taskTable+channel, 11, (u32)0x00000004); /* var[11] */ -+ MCD_SET_VAR(taskTable+channel, 12, (u32)0x08000000); /* var[12] */ -+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x00000000); /* inc[3] */ -+ MCD_SET_VAR(taskTable+channel, 28, (u32)0xc0000000); /* inc[4] */ -+ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000); /* inc[5] */ -+ MCD_SET_VAR(taskTable+channel, 30, (u32)0x80000001); /* inc[6] */ -+ MCD_SET_VAR(taskTable+channel, 31, (u32)0x40000000); /* inc[7] */ -+ -+ /* Set the task's Enable bit in its Task Control Register */ -+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; -+} -+ -+ -+/* -+ * Task 4 -+ */ -+ -+void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel) -+{ -+ -+ MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */ -+ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */ -+ MCD_SET_VAR(taskTable+channel, 6, (u32)rcvFifoPtr); /* var[6] */ -+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ -+ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */ -+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ -+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ -+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ -+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ -+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x0000ffff); /* var[9] */ -+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x30000000); /* var[10] */ -+ MCD_SET_VAR(taskTable+channel, 11, (u32)0x0fffffff); /* var[11] */ -+ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000008); /* var[12] */ -+ MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000); /* inc[0] */ -+ MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000); /* inc[1] */ -+ MCD_SET_VAR(taskTable+channel, 26, (u32)0x20000004); /* inc[2] */ -+ MCD_SET_VAR(taskTable+channel, 27, (u32)0x40000000); /* inc[3] */ -+ -+ /* Set the task's Enable bit in its Task Control Register */ -+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; -+} -+ -+ -+/* -+ * Task 5 -+ */ -+ -+void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel) -+{ -+ -+ MCD_SET_VAR(taskTable+channel, 0, (u32)bDBase); /* var[0] */ -+ MCD_SET_VAR(taskTable+channel, 3, (u32)currBD); /* var[3] */ -+ MCD_SET_VAR(taskTable+channel, 11, (u32)xmitFifoPtr); /* var[11] */ -+ MCD_SET_VAR(taskTable+channel, 1, (u32)0x00000000); /* var[1] */ -+ MCD_SET_VAR(taskTable+channel, 2, (u32)0x00000000); /* var[2] */ -+ MCD_SET_VAR(taskTable+channel, 4, (u32)0x00000000); /* var[4] */ -+ MCD_SET_VAR(taskTable+channel, 5, (u32)0x00000000); /* var[5] */ -+ MCD_SET_VAR(taskTable+channel, 6, (u32)0x00000000); /* var[6] */ -+ MCD_SET_VAR(taskTable+channel, 7, (u32)0x00000000); /* var[7] */ -+ MCD_SET_VAR(taskTable+channel, 8, (u32)0x00000000); /* var[8] */ -+ MCD_SET_VAR(taskTable+channel, 9, (u32)0x00000000); /* var[9] */ -+ MCD_SET_VAR(taskTable+channel, 10, (u32)0x00000000); /* var[10] */ -+ MCD_SET_VAR(taskTable+channel, 12, (u32)0x00000000); /* var[12] */ -+ MCD_SET_VAR(taskTable+channel, 13, (u32)0x0000ffff); /* var[13] */ -+ MCD_SET_VAR(taskTable+channel, 14, (u32)0xffffffff); /* var[14] */ -+ MCD_SET_VAR(taskTable+channel, 15, (u32)0x00000004); /* var[15] */ -+ MCD_SET_VAR(taskTable+channel, 16, (u32)0x00000008); /* var[16] */ -+ MCD_SET_VAR(taskTable+channel, 24, (u32)0x00000000); /* inc[0] */ -+ MCD_SET_VAR(taskTable+channel, 25, (u32)0x60000000); /* inc[1] */ -+ MCD_SET_VAR(taskTable+channel, 26, (u32)0x40000000); /* inc[2] */ -+ MCD_SET_VAR(taskTable+channel, 27, (u32)0xc000fffc); /* inc[3] */ -+ MCD_SET_VAR(taskTable+channel, 28, (u32)0xe0000004); /* inc[4] */ -+ MCD_SET_VAR(taskTable+channel, 29, (u32)0x80000000); /* inc[5] */ -+ MCD_SET_VAR(taskTable+channel, 30, (u32)0x4000ffff); /* inc[6] */ -+ MCD_SET_VAR(taskTable+channel, 31, (u32)0xe0000001); /* inc[7] */ -+ -+ /* Set the task's Enable bit in its Task Control Register */ -+ MCD_dmaBar->taskControl[channel] |= (u16)0x8000; -+} ---- /dev/null -+++ b/drivers/dma/MCD_tasksInit.h -@@ -0,0 +1,64 @@ -+/* -+ * drivers/dma/MCD_tasksInit.h -+ * -+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+#ifndef MCD_TSK_INIT_H -+#define MCD_TSK_INIT_H 1 -+ -+/* -+ * Autogenerated - Do not edit! -+ */ -+ -+/* -+ * Task 0 -+ */ -+void MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel); -+ -+ -+/* -+ * Task 1 -+ */ -+void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel); -+ -+ -+/* -+ * Task 2 -+ */ -+void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, int xferSize, short xferSizeIncr, int *cSave, volatile TaskTableEntry *taskTable, int channel); -+ -+ -+/* -+ * Task 3 -+ */ -+void MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, short destIncr, int dmaSize, short xferSizeIncr, int flags, int *currBD, int *cSave, volatile TaskTableEntry *taskTable, int channel); -+ -+ -+/* -+ * Task 4 -+ */ -+void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, volatile TaskTableEntry *taskTable, int channel); -+ -+ -+/* -+ * Task 5 -+ */ -+void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, volatile TaskTableEntry *taskTable, int channel); -+ -+#endif /* MCD_TSK_INIT_H */ ---- /dev/null -+++ b/drivers/i2c/busses/i2c-algo-mcf.h -@@ -0,0 +1,23 @@ -+#ifndef I2C_ALGO_MCF_H -+#define I2C_ALGO_MCF_H 1 -+ -+/* --- Defines for pcf-adapters --------------------------------------- */ -+#include <linux/i2c.h> -+ -+struct i2c_algo_mcf_data { -+ void *data; /* private data for lolevel routines */ -+ void (*setmcf) (void *data, int ctl, int val); -+ int (*getmcf) (void *data, int ctl); -+ int (*getown) (void *data); -+ int (*getclock) (void *data); -+ void (*waitforpin) (void); -+ /* local settings */ -+ int udelay; -+ int mdelay; -+ int timeout; -+}; -+ -+int i2c_mcf_add_bus(struct i2c_adapter *); -+int i2c_mcf_del_bus(struct i2c_adapter *); -+ -+#endif /* I2C_ALGO_MCF_H */ ---- /dev/null -+++ b/drivers/i2c/busses/i2c-mcf548x.c -@@ -0,0 +1,595 @@ -+/* -+ * Performance and stability improvements: (C) Copyright 2008, -+ * Adrian Cox <adrian@humboldt.co.uk> -+ * ColdFire 547x/548x I2C master support -+ * Shrek Wu (b16972@freescale.com )moved the code driver/i2c/alg/mcf.c -+ * into driver/i2c/busses.And changed the driver to a platform driver. -+ */ -+#include <linux/i2c.h> -+#include "i2c-algo-mcf.h" -+ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/delay.h> -+#include <linux/platform_device.h> -+#include <linux/sched.h> -+#include <linux/interrupt.h> -+#include <asm/io.h> -+ -+#include <asm/coldfire.h> -+#include <asm/m5485sim.h> -+#include <asm/m5485i2c.h> -+ -+#define get_clock(adap) (clock) -+#define get_own(adap) (own) -+ -+static int clock = 0x3b; /*50000 / 1024 ~ 49 KHz*/ -+module_param(clock, int, 0); -+MODULE_PARM_DESC(clock, -+ "Set I2C clock in kHz: 400=fast mode (default == 49khz)"); -+ -+static int own = 0x78; -+module_param(own, int, 0); -+MODULE_PARM_DESC(clock, "Set I2C Master controller address(0x78)"); -+ -+static struct i2c_algo_mcf_data i2c_mcf_board_data = { -+ .timeout = 10000, -+}; -+ -+static struct i2c_adapter i2c_mcf_board_adapter = { -+ .owner = THIS_MODULE, -+ .name = "MCF5485 adapter", -+ .id = I2C_HW_MPC107, -+ .algo_data = &i2c_mcf_board_data, -+ .class = I2C_CLASS_HWMON, -+ .timeout = 100, -+ .retries = 2 -+}; -+/* -+ * static void i2c_start() -+ * -+ * Generates START signal -+ */ -+static void -+i2c_start( -+ struct i2c_algo_mcf_data *adap -+) { -+ MCF_I2CR |= MCF_I2CR_MSTA; -+} -+ -+ -+/* -+ * static void i2c_stop() -+ * -+ * Generates STOP signal -+ */ -+static void -+i2c_stop( -+ struct i2c_algo_mcf_data *adap -+) { -+ MCF_I2CR &= ~MCF_I2CR_MSTA; -+} -+ -+static int -+i2c_getack( -+ struct i2c_algo_mcf_data *adap -+) { -+ return !(MCF_I2SR & MCF_I2SR_RXAK); -+} -+ -+/* -+ * static void i2c_repstart() -+ * -+ * Generates repeated start signal (without STOP while mastering the bus) -+ */ -+static void -+i2c_repstart( -+ struct i2c_algo_mcf_data *adap -+) { -+ MCF_I2CR |= MCF_I2CR_RSTA; -+ MCF_I2CR |= MCF_I2CR_MTX; -+} -+ -+ -+/* -+ * static void wait_for_bb() -+ * -+ * Wait for bus idle state -+ */ -+static int -+wait_for_bb( -+ struct i2c_algo_mcf_data *adap -+) { -+ int i; -+ for (i = 0; i < adap->timeout; i++) { -+ if (!(MCF_I2SR & MCF_I2SR_IBB)) -+ return 0; -+ udelay(100); -+ } -+ printk(KERN_ERR "%s: timeout", __FUNCTION__); -+ return -ETIMEDOUT; -+} -+ -+/* -+ * static void wait_for_not_bb() -+ * -+ * Wait for bus busy state -+ */ -+static int -+wait_for_not_bb( -+ struct i2c_algo_mcf_data *adap -+) { -+ int i; -+ for (i = 0; i < adap->timeout; i++) { -+ if (MCF_I2SR & MCF_I2SR_IBB) -+ return 0; -+ udelay(100); -+ } -+ printk(KERN_ERR "%s: timeout", __FUNCTION__); -+ return -ETIMEDOUT; -+} -+ -+/* -+ * static void wait_xfer_done() -+ * -+ * Wait for transfer to complete -+ */ -+static int -+wait_xfer_done( -+ struct i2c_algo_mcf_data *adap -+) { -+ int i; -+ -+ for (i = 0; i < adap->timeout; i++) { -+ if (MCF_I2SR & MCF_I2SR_IIF) { -+ MCF_I2SR &= ~MCF_I2SR_IIF; -+ return 0; -+ } -+ udelay(10); -+ } -+ printk(KERN_ERR "%s: timeout", __FUNCTION__); -+ return -ETIMEDOUT; -+} -+ -+ -+/* -+ * static void i2c_set_addr() -+ * -+ * Sets slave address to communicate -+ */ -+static int -+i2c_set_addr( -+ struct i2c_algo_mcf_data *adap, -+ struct i2c_msg *msg, -+ int retries -+) { -+ unsigned short flags = msg->flags; -+ unsigned char addr; -+ MCF_I2CR |= MCF_I2CR_MTX; -+ if ((flags & I2C_M_TEN)) { -+ /* 10 bit address not supported yet */ -+ return -EIO; -+ } else { -+ /* normal 7bit address */ -+ addr = (msg->addr << 1); -+ if (flags & I2C_M_RD) -+ addr |= 1; -+ if (flags & I2C_M_REV_DIR_ADDR) -+ addr ^= 1; -+ -+ MCF_I2DR = addr; -+ } -+ return 0; -+} -+ -+ -+/* -+ * static void mcf_i2c_init() -+ * -+ * Perform ColdFire i2c initialization -+ */ -+static void -+mcf_i2c_init(struct i2c_algo_mcf_data *adap) -+{ -+ u8 dummy; -+ /* Setup GPIO lines */ -+ MCF_PAR_FECI2CIRQ |= MCF_PAR_SDA; -+ MCF_PAR_FECI2CIRQ |= MCF_PAR_SCL; -+ -+ /* Ensure slaves are in idle state */ -+ if (MCF_I2SR & MCF_I2SR_IBB) { -+ MCF_I2ICR = 0x00; -+ MCF_I2CR = 0x00; -+ MCF_I2CR = 0x0A; -+ dummy = MCF_I2DR; -+ MCF_I2SR = 0x00; -+ MCF_I2CR = 0x00; -+ MCF_I2ICR = 0x01; -+ } -+ -+ /* setup SCL clock */ -+ MCF_I2FDR = get_clock(adap); -+ -+ /* set slave address */ -+ MCF_I2AR = get_own(adap); -+ -+ /* enable I2C module */ -+ MCF_I2CR = MCF_I2CR_IEN; -+} -+ -+static int i2c_outb( -+ struct i2c_adapter *i2c_adap, -+ char c -+) { -+ -+ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data; -+ int timeout; -+ /* Put data to be sent */ -+ MCF_I2DR = c; -+ /* Wait for xfer completed*/ -+ timeout = wait_xfer_done(adap); -+ if (timeout) { -+ i2c_stop(adap); -+ wait_for_bb(adap); -+ printk(KERN_ERR "i2c-algo-mcf: %s i2c_write: " -+ "error - timeout.\n", i2c_adap->name); -+ return -EREMOTEIO; /* got a better one ?? */ -+ } -+ -+ return 0; -+} -+ -+ -+/* -+ * static void mcf_sendbytes() -+ * -+ * Perform tx data transfer -+ */ -+static int -+mcf_sendbytes( -+ struct i2c_adapter *i2c_adap, -+ const char *buf, -+ int count, int last -+) { -+ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data; -+ int ret, i; -+ -+ /* Set master TX mode */ -+ MCF_I2CR |= MCF_I2CR_MTX; -+ -+ for (i = 0; i < count; ++i) { -+ printk(KERN_DEBUG "i2c-algo-mcf: %s i2c_write: writing %2.2X\n", -+ i2c_adap->name, buf[i]&0xff); -+ ret = i2c_outb(i2c_adap, buf[i]); -+ if (ret < 0) -+ return ret; -+ } -+ if (last) { -+ i2c_stop(adap); -+ wait_for_bb(adap); -+ } else { -+ /* i2c_repstart(adap);*/ -+ } -+ -+ return (i); -+} -+ -+ -+/* -+ * static void mcf_readbytes() -+ * -+ * Perform rx data transfer -+ */ -+static int -+mcf_readbytes( -+ struct i2c_adapter *i2c_adap, -+ char *buf, -+ int count, int last -+) { -+ int i; -+ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data; -+ u8 dummy; -+ -+ /* Set master RX mode */ -+ MCF_I2CR &= ~MCF_I2CR_MTX; -+ MCF_I2CR &= ~MCF_I2CR_TXAK; -+ dummy = MCF_I2DR; -+ -+ for (i = 0; i < count-1; i++) { -+ if (wait_xfer_done(adap)) { -+ i2c_stop(adap); -+ wait_for_bb(adap); -+ printk(KERN_DEBUG -+ "i2c-algo-mcf: mcf_readbytes timed out.\n"); -+ return (-1); -+ } -+ -+ /* store next data byte */ -+ buf[i] = MCF_I2DR; -+ } -+ -+ if (wait_xfer_done(adap)) { -+ i2c_stop(adap); -+ wait_for_bb(adap); -+ printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n"); -+ return (-1); -+ } -+ -+ /* Disable acknowlege (set I2CR.TXAK) */ -+ MCF_I2CR |= MCF_I2CR_TXAK; -+ buf[i] = MCF_I2DR; -+ if (wait_xfer_done(adap)) { -+ i2c_stop(adap); -+ wait_for_bb(adap); -+ printk(KERN_DEBUG "i2c-algo-mcf: mcf_readbytes timed out.\n"); -+ return (-1); -+ } -+ -+ if (last) { -+ i2c_stop(adap); -+ wait_for_bb(adap); -+ } else { -+ /* i2c_repstart(adap);*/ -+ } -+ -+ return (i+1); -+} -+ -+ -+/* -+ * static void mcf_xfer() -+ * -+ * Perform master data I/O transfer -+ */ -+static int -+mcf_xfer( -+ struct i2c_adapter *i2c_adap, -+ struct i2c_msg *msgs, -+ int num -+) { -+ struct i2c_algo_mcf_data *adap = i2c_adap->algo_data; -+ struct i2c_msg *pmsg; -+ int i; -+ int ret = 0, timeout; -+ -+ /* Skip own address */ -+ if (get_own(adap) == (msgs[0].addr << 1)) -+ return -EIO; -+ -+ /* Ensure slaves are in idle state */ -+ if (MCF_I2SR & MCF_I2SR_IBB) { -+ MCF_I2ICR = 0x00; -+ MCF_I2CR = 0x00; -+ MCF_I2CR = 0x0A; -+ timeout = MCF_I2DR; -+ MCF_I2SR = 0x00; -+ MCF_I2CR = 0x00; -+ MCF_I2ICR = 0x01; -+ } -+ /* setup SCL clock */ -+ MCF_I2FDR = get_clock(adap); -+ /* set slave address */ -+ MCF_I2AR = get_own(adap); -+ /* enable I2C module */ -+ MCF_I2CR = MCF_I2CR_IEN; -+ -+ MCF_I2CR |= MCF_I2CR_TXAK; -+ -+ /* Check for bus busy */ -+ wait_for_bb(adap); -+ -+ for (i = 0; ret >= 0 && i < num; i++) { -+ if (MCF_I2SR & MCF_I2SR_IBB) { -+ MCF_I2ICR = 0x00; -+ MCF_I2CR = 0x00; -+ MCF_I2CR = 0x0A; -+ timeout = MCF_I2DR; -+ MCF_I2SR = 0x00; -+ MCF_I2CR = 0x00; -+ MCF_I2ICR = 0x01; -+ } -+ /* setup SCL clock */ -+ MCF_I2FDR = get_clock(adap); -+ /* set slave address */ -+ MCF_I2AR = get_own(adap); -+ /* enable I2C module */ -+ MCF_I2CR = MCF_I2CR_IEN; -+ -+ MCF_I2CR |= MCF_I2CR_TXAK; -+ -+ /* Check for bus busy */ -+ wait_for_bb(adap); -+ -+ pmsg = &msgs[i]; -+ -+ printk(KERN_DEBUG "i2c-algo-mcf: Doing %s %d bytes " -+ "to 0x%02x - %d of %d messages\n", -+ pmsg->flags & I2C_M_RD ? "read" : "write", -+ pmsg->len, pmsg->addr, i + 1, num); -+ -+ /* Send START */ -+ /*if (i == 0)*/ -+ i2c_start(adap); -+ -+ /* Wait for Bus Busy */ -+ wait_for_not_bb(adap); -+ -+ MCF_I2CR |= MCF_I2CR_MTX; -+ -+ ret = i2c_set_addr(adap, pmsg, i2c_adap->retries); -+ if (ret < 0) -+ return ret; -+ -+ /* Wait for address transfer completion */ -+ wait_xfer_done(adap); -+ -+ /* Check for ACK */ -+ if (!i2c_getack(adap)) { -+ i2c_stop(adap); -+ wait_for_bb(adap); -+ printk(KERN_DEBUG "i2c-algo-mcf: No ack after " -+ "send address in mcf_xfer\n"); -+ return (-EREMOTEIO); -+ } -+ -+ printk(KERN_DEBUG "i2c-algo-mcf: Msg %d, " -+ "addr = 0x%x, flags = 0x%x, len = %d\n", -+ i, msgs[i].addr, msgs[i].flags, msgs[i].len); -+ /* Read */ -+ if (pmsg->flags & I2C_M_RD) { -+ /* read bytes into buffer*/ -+ ret = mcf_readbytes(i2c_adap, pmsg->buf, pmsg->len, -+ (i + 1 == num)); -+ -+ if (ret != pmsg->len) { -+ printk(KERN_DEBUG "i2c-algo-mcf: fail: " -+ "only read %d bytes.\n", ret); -+ } else { -+ printk(KERN_DEBUG "i2c-algo-mcf: " -+ "read %d bytes.\n", ret); -+ } -+ } else { -+ /* write bytes into buffer*/ -+ ret = mcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len, -+ (i + 1 == num)); -+ if (ret != pmsg->len) { -+ printk(KERN_DEBUG "i2c-algo-mcf: fail: " -+ "only wrote %d bytes.\n", ret); -+ } else { -+ printk(KERN_DEBUG "i2c-algo-mcf: wrote" -+ "%d bytes.\n", ret); -+ } -+ } -+ MCF_I2CR = 0; -+ } -+ -+ /* Disable I2C module */ -+ MCF_I2CR = 0; -+ return (i); -+} -+ -+ -+/* -+ * static void mcf_func() -+ * -+ * Return algorithm funtionality -+ */ -+static u32 -+mcf_func( -+ struct i2c_adapter *i2c_adap -+) { -+ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; -+} -+ -+/* -+ * ColdFire bus algorithm callbacks -+ */ -+static struct i2c_algorithm mcf_algo = { -+ .master_xfer = mcf_xfer, -+ .functionality = mcf_func, -+}; -+ -+/***********************************************************/ -+struct coldfire_i2c { -+ void __iomem *base; -+ struct resource *irqarea; -+ struct resource *ioarea; -+ u32 irq; -+ struct i2c_adapter *adap; -+ u32 flags; -+}; -+ -+/* -+ * registering functions to load algorithms at runtime -+ */ -+int i2c_mcf_add_bus(struct i2c_adapter *adap) -+{ -+ struct i2c_algo_mcf_data *mcf_adap = adap->algo_data; -+ -+ /*adap->id |= mcf_algo.id;*/ -+ adap->algo = &mcf_algo; -+ adap->timeout = 100; -+ -+ mcf_i2c_init(mcf_adap); -+ -+#ifdef MODULE -+ MOD_INC_USE_COUNT; -+#endif -+ -+ i2c_add_adapter(adap); -+ -+ return 0; -+} -+ -+static int mcf548x_i2c_probe(struct platform_device *pdev) -+{ -+ struct coldfire_i2c *i2c; -+ int rc = 0; -+ -+ /************************************************************/ -+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); -+ if (!i2c) { -+ printk(KERN_ERR "%s kzalloc coldfire_i2c faile\n", -+ __FUNCTION__); -+ return -ENOMEM; -+ } -+ /****************************************************************/ -+ platform_set_drvdata(pdev, i2c); -+ -+ i2c->adap = &i2c_mcf_board_adapter; -+ i2c->adap->dev.parent = &pdev->dev; -+ rc = i2c_mcf_add_bus(i2c->adap); -+ if (rc < 0) { -+ printk(KERN_ERR "%s - failed to add adapter\n", __FUNCTION__); -+ rc = -ENODEV; -+ goto fail_add; -+ } -+ -+ printk(KERN_INFO "i2c-algo-mcf.o: I2C ColdFire algorithm" -+ " module is loaded.\n"); -+ return rc; -+ -+fail_add: -+ kfree(i2c); -+ return rc; -+}; -+ -+static int mcf548x_i2c_remove(struct platform_device *pdev) -+{ -+ struct coldfire_i2c *i2c = platform_get_drvdata(pdev); -+ -+ i2c_del_adapter(i2c->adap); -+ platform_set_drvdata(pdev, NULL); -+ iounmap(i2c->base); -+ kfree(i2c); -+ return 0; -+}; -+ -+/* Structure for a device driver */ -+static struct platform_driver mcf548x_i2c_driver = { -+ .probe = mcf548x_i2c_probe, -+ .remove = mcf548x_i2c_remove, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "MCF548X-i2c", -+ }, -+}; -+ -+static int __init coldfire_i2c_init(void) -+{ -+ return platform_driver_register(&mcf548x_i2c_driver); -+} -+ -+static void __exit coldfire_i2c_exit(void) -+{ -+ platform_driver_unregister(&mcf548x_i2c_driver); -+} -+ -+module_init(coldfire_i2c_init); -+module_exit(coldfire_i2c_exit); -+ -+MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); -+MODULE_DESCRIPTION -+ ("I2C-Bus adapter for MCF547x and MCF548x processors"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/i2c/busses/i2c-mcf.c -@@ -0,0 +1,573 @@ -+/* -+ i2c-mcf.c - Part of lm_sensors, Linux kernel modules for hardware monitoring -+ -+ Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca> -+ <http://www3.sympatico.ca/derek.cheung> -+ -+ Copyright (c) 2006-2007, emlix -+ Sebastian Hess <sh@emlix.com> -+ -+ Copyright (c) 2006-2007 Freescale Semiconductor, Inc -+ Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com> -+ Matt Waddel <Matt.Waddel@freescale.com> -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ -+ Changes: -+ v0.1 26 March 2005 -+ Initial Release - developed on uClinux with 2.6.9 kernel -+ -+ v0.2 29 May 2006 -+ Modified to be more generic and added support for -+ i2c_master_xfer -+ -+ This I2C adaptor supports the ColdFire CPU I2C module. Since most Coldfire -+ CPUs' I2C module use the same register set (e.g., MCF5249), the code is very -+ portable and re-usable to other Coldfire CPUs. -+ -+ The transmission frequency is set at about 100KHz for the CPU board with -+ 8MHz crystal. If the CPU board uses different system clock frequency, you -+ should change the following line: -+ static int __init i2c_coldfire_init(void) -+ { -+ ......... -+ // Set transmission frequency 0x15 = ~100kHz -+ *MCF_I2C_I2FDR = 0x15; -+ ........ -+ } -+ -+ Remember to perform a dummy read to set the ColdFire CPU's I2C module for -+ read before reading the actual byte from a device -+ -+ The I2C_SM_BUS_BLOCK_DATA function are not yet ready but most lm_senors -+ do not care -+*/ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/errno.h> -+#include <linux/i2c.h> -+#include <linux/delay.h> -+#include <linux/string.h> -+#include <asm/coldfire.h> -+#include <asm/mcfsim.h> -+#include <asm/types.h> -+#include <linux/platform_device.h> -+#include "i2c-mcf.h" -+ -+ -+static struct i2c_algorithm coldfire_algorithm = { -+ /*.name = "ColdFire I2C algorithm", -+ .id = I2C_ALGO_SMBUS,*/ -+ .smbus_xfer = coldfire_i2c_access, -+ .master_xfer = coldfire_i2c_master, -+ .functionality = coldfire_func, -+}; -+ -+ -+static struct i2c_adapter coldfire_adapter = { -+ .owner = THIS_MODULE, -+ .class = I2C_CLASS_HWMON, -+ .algo = &coldfire_algorithm, -+ .name = "ColdFire I2C adapter", -+}; -+ -+ -+__u16 lastaddr; -+__u16 lastop; -+ -+static inline int coldfire_do_first_start(__u16 addr,__u16 flags) -+{ -+ int err; -+ /* -+ * Generate a stop and put the I2C module into slave mode -+ */ -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA; -+ -+ /* -+ * Generate a new Start signal -+ */ -+ err = coldfire_i2c_start(flags & I2C_M_RD ? I2C_SMBUS_READ : I2C_SMBUS_WRITE, -+ addr, FIRST_START); -+ if(err) return err; -+ -+ lastaddr = addr; -+ lastop = flags & I2C_M_RD; /* Ensure everything for new start */ -+ return 0; -+} -+ -+ -+/* -+ * read one byte data from the I2C bus -+ */ -+static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType) { -+ -+ int timeout; -+ -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MTX; /* master receive mode*/ -+ -+ if (ackType == NACK) -+ *MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK; /* generate NA */ -+ else -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* generate ACK */ -+ -+ -+ /* read data from the I2C bus */ -+ *rxData = *MCF_I2C_I2DR; -+ -+ /* printk(">>> %s I2DR data is %.2x \n", __FUNCTION__, *rxData); */ -+ -+ /* wait for data transfer to complete */ -+ timeout = 500; -+ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF)) -+ udelay(1); -+ if (timeout <= 0) -+ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, -+ timeout); -+ -+ -+ /* reset the interrupt bit */ -+ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF; -+ -+ if (timeout <= 0 ) -+ return -1; -+ else -+ return 0; -+ -+}; -+ -+ -+/* -+ * write one byte data onto the I2C bus -+ */ -+static int coldfire_write_data(const u8 txData) { -+ -+ int timeout; -+ -+ timeout = 500; -+ -+ *MCF_I2C_I2CR |= MCF_I2C_I2CR_MTX; /* I2C module into TX mode */ -+ *MCF_I2C_I2DR = txData; /* send the data */ -+ -+ /* wait for data transfer to complete */ -+ /* rely on the interrupt handling bit */ -+ timeout = 500; -+ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF)) -+ udelay(1); -+ if (timeout <=0) -+ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, -+ timeout); -+ -+ -+ /* reset the interrupt bit */ -+ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF; -+ -+ if (timeout <= 0 ) -+ return -1; -+ else -+ return 0; -+ -+}; -+ -+ -+ -+ -+/* -+ * Generate I2C start or repeat start signal -+ * Combine the 7 bit target_address and the R/W bit and put it onto the I2C bus -+ */ -+static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE start_type) { -+ -+ int timeout; -+ -+ /* printk(">>> %s START TYPE %s \n", __FUNCTION__, -+ start_type == FIRST_START ? "FIRST_START":"REPEAT_START");*/ -+ -+ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN; -+ -+ if (start_type == FIRST_START) { -+ /* Make sure the I2C bus is idle */ -+ timeout = 500; /* 500us timeout */ -+ while (timeout-- && (*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB)) -+ udelay(1); -+ if (timeout <= 0) { -+ printk("%s - I2C bus always busy in the past 500us timeout is %d \n", __FUNCTION__, timeout); -+ goto check_rc; -+ } -+ /* generate a START and put the I2C module into MASTER TX mode*/ -+ *MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX); -+ -+ /* wait for bus busy to be set */ -+ timeout = 500; -+ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB)) -+ udelay(1); -+ if (timeout <= 0) { -+ printk("%s - I2C bus is never busy after START. Timeout is %d \n", __FUNCTION__, timeout); -+ goto check_rc; -+ } -+ -+ } else { -+ /* this is repeat START */ -+ udelay(500); /* need some delay before repeat start */ -+ *MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_RSTA); -+ } -+ -+ -+ /* combine the R/W bit and the 7 bit target address and put it onto -+ the I2C bus */ -+ *MCF_I2C_I2DR = ((target_address & 0x7F) << 1) | (read_write == I2C_SMBUS_WRITE ? 0x00 : 0x01); -+ -+ /* wait for bus transfer to complete */ -+ /* when one byte transfer is completed, IIF set at the faling edge of -+ the 9th clock */ -+ timeout = 500; -+ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF)) -+ udelay(1); -+ if (timeout <= 0) -+ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, timeout); -+ -+ -+check_rc: -+ /* reset the interrupt bit */ -+ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF; -+ -+ if (timeout <= 0) -+ return -1; -+ else -+ return 0; -+}; -+ -+ -+/* -+ * 5282 SMBUS supporting functions -+ */ -+ -+static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 addr, -+ unsigned short flags, char read_write, -+ u8 command, int size, union i2c_smbus_data *data) -+{ -+ int rc = 0; -+ u8 rxData, tempRxData[2]; -+ -+ switch (size) { -+ case I2C_SMBUS_QUICK: -+ rc = coldfire_i2c_start(read_write, addr, FIRST_START); /* generate START */ -+ break; -+ case I2C_SMBUS_BYTE: -+ rc = coldfire_i2c_start(read_write, addr, FIRST_START); -+ *MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK; /*generate NA */ -+ if (read_write == I2C_SMBUS_WRITE) -+ rc += coldfire_write_data(command); -+ else { -+ coldfire_read_data(&rxData, NACK);/*dummy read*/ -+ rc += coldfire_read_data(&rxData, NACK); -+ data->byte = rxData; -+ } -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* reset ACK bit */ -+ break; -+ case I2C_SMBUS_BYTE_DATA: -+ rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, FIRST_START); -+ rc += coldfire_write_data(command); -+ if (read_write == I2C_SMBUS_WRITE) -+ rc += coldfire_write_data(data->byte); -+ else { -+ /* This is SMBus READ Byte Data Request. -+ Perform REPEAT START */ -+ rc += coldfire_i2c_start(I2C_SMBUS_READ, addr, -+ REPEAT_START); -+ coldfire_read_data(&rxData, ACK);/* dummy read*/ -+ /* Disable Acknowledge, generate STOP after -+ next byte transfer */ -+ rc += coldfire_read_data(&rxData, NACK); -+ data->byte = rxData; -+ } -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;/* reset to normal ACk */ -+ break; -+ case I2C_SMBUS_PROC_CALL: -+ case I2C_SMBUS_WORD_DATA: -+ dev_info(&adap->dev, "size = I2C_SMBUS_WORD_DATA \n"); -+ rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, -+ FIRST_START); -+ rc += coldfire_write_data(command); -+ if (read_write == I2C_SMBUS_WRITE) { -+ rc += coldfire_write_data(data->word & 0x00FF); -+ rc += coldfire_write_data((data->word & 0x00FF) >> 8); -+ } else { -+ /* This is SMBUS READ WORD request. -+ Peform REPEAT START */ -+ rc += coldfire_i2c_start(I2C_SMBUS_READ, addr, -+ REPEAT_START); -+ coldfire_read_data(&rxData, ACK);/* dummy read*/ -+ /* Disable Acknowledge, generate STOP after -+ next byte transfer */ -+ /* read the MS byte from the device */ -+ rc += coldfire_read_data(&rxData, NACK); -+ tempRxData[1] = rxData; -+ /* read the LS byte from the device */ -+ rc += coldfire_read_data(&rxData, NACK); -+ tempRxData[0] = rxData; -+ /* the host driver expect little endian -+ convention. Swap the byte */ -+ data->word = (tempRxData[0] << 8)|tempRxData[1]; -+ } -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; -+ break; -+ case I2C_SMBUS_BLOCK_DATA: -+ /* Not done yet */ -+ break; -+ default: -+ printk("Unsupported I2C size \n"); -+ rc = -1; -+ break; -+ }; -+ -+ /* Generate a STOP and put I2C module into slave mode */ -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA; -+ -+ /* restore interrupt */ -+ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN; -+ -+ if (rc < 0) -+ return -1; -+ else -+ return 0; -+}; -+ -+ -+/* -+ * List the SMBUS functions supported by this I2C adaptor -+ * Also tell the I2C Subsystem that we are able of master_xfer() -+ */ -+static u32 coldfire_func(struct i2c_adapter *adapter) -+{ -+ return(I2C_FUNC_SMBUS_QUICK | -+ I2C_FUNC_SMBUS_BYTE | -+ I2C_FUNC_SMBUS_PROC_CALL | -+ I2C_FUNC_SMBUS_BYTE_DATA | -+ I2C_FUNC_SMBUS_WORD_DATA | -+ I2C_FUNC_I2C | -+ I2C_FUNC_SMBUS_BLOCK_DATA); -+}; -+ -+static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs, -+ int num) -+{ -+ u8 dummyRead; -+ struct i2c_msg *p; -+ int i, err = 0; -+ int ic=0; -+ -+ lastaddr = 0; -+ lastop = 8; -+ -+ /* disable the IRQ, we are doing polling */ -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_IIEN; -+ -+ dev_dbg(&adap->dev,"Num of actions: %d\n", num); -+ -+ for (i = 0; !err && i < num; i++) { -+ p = &msgs[i]; -+ -+ -+ if (!p->len) -+ { -+ dev_dbg(&adap->dev,"p->len == 0!\n"); -+ continue; -+ } -+ /* -+ * Generate a new Start, if the target address differs from -+ * the last target, generate a stop in this case first -+ */ -+ if(p->addr != lastaddr) -+ { -+ err = coldfire_do_first_start(p->addr,p->flags); -+ if(err) -+ { -+ dev_dbg(&adap->dev,"First Init failed!\n"); -+ break; -+ } -+ } -+ -+ else if((p->flags & I2C_M_RD) != lastop) -+ { -+ /* -+ * If the Operational Mode changed, we need to do this -+ * here ... -+ */ -+ dev_dbg(&adap->dev,"%s(): Direction changed, was: %d; is now: %d\n", __FUNCTION__, lastop, p->flags & I2C_M_RD); -+ -+ /* Last op was an read, now it's write: complete stop -+ and reinit */ -+ if (lastop & I2C_M_RD) -+ { -+ dev_dbg(&adap->dev,"%s(): The device is in read state, we must reset!\n", __FUNCTION__); -+ if((err = coldfire_do_first_start(p->addr,p->flags))) -+ break; -+ } -+ else -+ { -+ dev_dbg(&adap->dev,"%s(): We switchted to read mode\n",__FUNCTION__); -+ if((err = coldfire_i2c_start((p->flags & I2C_M_RD) ? I2C_SMBUS_READ : I2C_SMBUS_WRITE, -+ p->addr, REPEAT_START))) -+ break; -+ } -+ -+ lastop = p->flags & I2C_M_RD; /* Save the last op */ -+ } -+ -+ if (p->flags & I2C_M_RD) -+ { -+ /* -+ * When ever we get here, a new session was activated, -+ * so read a dummy byte -+ */ -+ coldfire_read_data(&dummyRead, ACK); -+ /* -+ * read p->len -1 bytes with ACK to the slave, -+ * read the last byte without the ACK, to inform him -+ * about the stop afterwards -+ */ -+ ic = 0; -+ while(!err && (ic < p->len-1 )) -+ { -+ err = coldfire_read_data(p->buf+ic, ACK ); -+ ic++; -+ } -+ if(!err) -+ err = coldfire_read_data(p->buf+ic, NACK); -+ dev_dbg(&coldfire_adapter.dev,"read: %2x\n",p->buf[ic]); -+ } -+ else -+ { -+ if(p->len == 2) -+ dev_dbg(&coldfire_adapter.dev,"writing: 0x %2x %2x\n", p->buf[0], p->buf[1]); -+ -+ /* -+ * Write data to the slave -+ */ -+ for(ic=0; !err && ic < p->len; ic++) -+ { -+ err = coldfire_write_data(p->buf[ic]); -+ if(err) -+ { -+ dev_dbg(&coldfire_adapter.dev, "Failed to write data\n"); -+ } -+ } -+ } -+ } -+ -+ /* -+ * Put the device into slave mode to enable the STOP Generation -+ * (the RTC needs this) -+ */ -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA; -+ -+ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* reset the ACK bit */ -+ -+ /* restore interrupt */ -+ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN; -+ -+ /* Return the number of messages processed, or the error code. */ -+ if (err == 0) -+ err = num; -+ return err; -+} -+ -+ -+/* -+ * Initalize the 5282 I2C module -+ * Disable the 5282 I2C interrupt capability. Just use callback -+ */ -+ -+static int __init i2c_coldfire_init(void) -+{ -+ int retval; -+ u8 dummyRead; -+ -+#if defined(CONFIG_M532x) || defined(CONFIG_M5445X) -+ /* -+ * Initialize the GPIOs for I2C -+ */ -+ MCF_GPIO_PAR_FECI2C |= (0 -+ | MCF_GPIO_PAR_FECI2C_PAR_SDA(3) -+ | MCF_GPIO_PAR_FECI2C_PAR_SCL(3)); -+#elif defined(CONFIG_M5253) -+ { -+ volatile u32 *reg; -+ /* GPIO Bit 41 = SCL0, Bit 42 = SDA0 */ -+ reg = (volatile u32 *)(MCF_MBAR2 + MCFSIM2_GPIO1FUNC); -+ *reg &= 0xFFFFF9FF; -+ } -+#else -+ /* Initialize PASP0 and PASP1 to I2C functions, 5282 user guide 26-19 */ -+ /* Port AS Pin Assignment Register (PASPAR) */ -+ /* PASPA1 = 11 = AS1 pin is I2C SDA */ -+ /* PASPA0 = 11 = AS0 pin is I2C SCL */ -+ *MCF_GPIO_PASPAR |= 0x000F; /* u16 declaration */ -+#endif -+ -+ -+ /* Set transmission frequency 0x15 = ~100kHz */ -+ *MCF_I2C_I2FDR = 0x15; -+ -+ /* set the 5282 I2C slave address though we never use it */ -+ *MCF_I2C_I2ADR = 0x6A; -+ -+ /* Enable I2C module and if IBB is set, do the special initialzation */ -+ /* procedures as are documented at the 5282 User Guide page 24-11 */ -+ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN; -+ if ((*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB) == 1) { -+ printk("%s - do special 5282 I2C init procedures \n", -+ __FUNCTION__); -+ *MCF_I2C_I2CR = 0x00; -+ *MCF_I2C_I2CR = 0xA0; -+ dummyRead = *MCF_I2C_I2DR; -+ *MCF_I2C_I2SR = 0x00; -+ *MCF_I2C_I2CR = 0x00; -+ } -+ -+ /* default I2C mode is - slave and receive */ -+ *MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX); -+ -+ coldfire_adapter.dev.parent = &platform_bus; -+ retval = i2c_add_adapter(&coldfire_adapter); -+ -+ if (retval < 0) -+ printk("%s - return code is: %d \n", __FUNCTION__, retval); -+ -+ return retval; -+}; -+ -+ -+/* -+ * I2C module exit function -+ */ -+ -+static void __exit i2c_coldfire_exit(void) -+{ -+ /* disable I2C and Interrupt */ -+ *MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_IEN | MCF_I2C_I2CR_IIEN); -+ i2c_del_adapter(&coldfire_adapter); -+ -+}; -+ -+ -+MODULE_AUTHOR("Derek CL Cheung <derek.cheung@sympatico.ca>"); -+MODULE_DESCRIPTION("MCF5282 I2C adaptor"); -+MODULE_LICENSE("GPL"); -+ -+module_init(i2c_coldfire_init); -+module_exit(i2c_coldfire_exit); ---- /dev/null -+++ b/drivers/i2c/busses/i2c-mcf.h -@@ -0,0 +1,75 @@ -+/* -+ i2c-mcf.h - header file for i2c-mcf.c -+ -+ Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca> -+ <http://www3.sympatico.ca/derek.cheung> -+ -+ Copyright (c) 2006-2007, emlix -+ Sebastian Hess <sh@emlix.com> -+ -+ Copyright (c) 2006-2007 Freescale Semiconductor, Inc -+ Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com> -+ Matt Waddel <Matt.Waddel@freescale.com> -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ -+ Changes: -+ v0.1 26 March 2005 -+ Initial Release - developed on uClinux with 2.6.9 kernel -+ v0.2 29 May 2006 -+ Modified to be more generic and added support for -+ i2c_master_xfer -+*/ -+ -+ -+#ifndef __I2C_MCF_H__ -+#define __I2C_MCF_H__ -+ -+enum I2C_START_TYPE { FIRST_START, REPEAT_START }; -+enum I2C_ACK_TYPE { ACK, NACK}; -+ -+/* Function prototypes */ -+static u32 coldfire_func(struct i2c_adapter *adapter); -+static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 address, -+ unsigned short flags, char read_write, -+ u8 command, int size, union i2c_smbus_data *data); -+static int coldfire_write_data(const u8 data); -+static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE i2c_start); -+static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType); -+static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs, int num); -+void dumpReg(char *, u16 addr, u8 data); -+ -+#define MCF_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) -+#define MCF_I2C_I2FDR_IC(x) (((x)&0x3F)) -+ -+/* I2C Control Register */ -+#define MCF_I2C_I2CR_IEN (0x80) /* I2C enable */ -+#define MCF_I2C_I2CR_IIEN (0x40) /* interrupt enable */ -+#define MCF_I2C_I2CR_MSTA (0x20) /* master/slave mode */ -+#define MCF_I2C_I2CR_MTX (0x10) /* transmit/receive mode */ -+#define MCF_I2C_I2CR_TXAK (0x08) /* transmit acknowledge enable */ -+#define MCF_I2C_I2CR_RSTA (0x04) /* repeat start */ -+ -+/* I2C Status Register */ -+#define MCF_I2C_I2SR_ICF (0x80) /* data transfer bit */ -+#define MCF_I2C_I2SR_IAAS (0x40) /* I2C addressed as a slave */ -+#define MCF_I2C_I2SR_IBB (0x20) /* I2C bus busy */ -+#define MCF_I2C_I2SR_IAL (0x10) /* aribitration lost */ -+#define MCF_I2C_I2SR_SRW (0x04) /* slave read/write */ -+#define MCF_I2C_I2SR_IIF (0x02) /* I2C interrupt */ -+#define MCF_I2C_I2SR_RXAK (0x01) /* received acknowledge */ -+ -+/********************************************************************/ -+#endif /* __I2C_MCF_H__ */ ---- a/drivers/i2c/busses/Kconfig -+++ b/drivers/i2c/busses/Kconfig -@@ -4,6 +4,18 @@ - - menu "I2C Hardware Bus support" - -+config I2C_MCF548x -+ tristate "I2C MCF547x/548x interfaces" -+ depends on I2C -+ help -+ This allows you to use the I2C adapters found on the Freescale -+ MCF547x/548x microcontrollers. -+ Say Y if you own an I2C adapter belonging to this class and then say -+ Y to the specific driver for you adapter below. -+ -+ This support is also available as a module. If so, the module -+ will be called i2c-algo-mcf. -+ - config I2C_ALI1535 - tristate "ALI 1535" - depends on PCI -@@ -290,6 +302,16 @@ config I2C_POWERMAC - This support is also available as a module. If so, the module - will be called i2c-powermac. - -+config I2C_MCF -+ tristate "MCF ColdFire" -+ depends on I2C && EXPERIMENTAL -+ help -+ If you say yes to this option, support will be included for the -+ I2C on most ColdFire CPUs -+ -+ This driver can also be built as a module. If so, the module -+ will be called i2c-mcf. -+ - config I2C_MPC - tristate "MPC107/824x/85xx/52xx/86xx" - depends on PPC32 ---- a/drivers/i2c/busses/Makefile -+++ b/drivers/i2c/busses/Makefile -@@ -52,6 +52,8 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o - obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o - obj-$(CONFIG_SCx200_ACB) += scx200_acb.o - obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o -+obj-$(CONFIG_I2C_MCF548x) += i2c-mcf548x.o -+obj-$(CONFIG_I2C_MCF) += i2c-mcf.o - - ifeq ($(CONFIG_I2C_DEBUG_BUS),y) - EXTRA_CFLAGS += -DDEBUG ---- a/drivers/macintosh/Kconfig -+++ b/drivers/macintosh/Kconfig -@@ -118,7 +118,6 @@ config PMAC_SMU - - config PMAC_APM_EMU - tristate "APM emulation" -- select APM_EMULATION - depends on ADB_PMU && PM && PPC32 - - config PMAC_MEDIABAY ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -93,3 +93,5 @@ obj-$(CONFIG_PPC_PS3) += ps3/ - obj-$(CONFIG_OF) += of/ - obj-$(CONFIG_SSB) += ssb/ - obj-$(CONFIG_VIRTIO) += virtio/ -+ -+obj-$(CONFIG_MCD_DMA) += dma/ ---- /dev/null -+++ b/drivers/net/can/flexcan/flexcan.c -@@ -0,0 +1,378 @@ -+/* -+ * flexcan.c -+ * -+ * DESCRIPTION: -+ * CAN bus driver for the alone generic (as possible as) FLEXCAN controller. -+ * -+ * AUTHOR: -+ * Andrey Volkov <avolkov@varma-el.com> -+ * -+ * COPYRIGHT: -+ * 2005-2006, Varma Electronics Oy -+ * -+ * LICENCE: -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ * HISTORY: -+ * 2008-06-23 Support for MCF548x's FlexCAN -+ * Huan, Wang <b18965@freescale.com> -+ */ -+ -+ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <linux/netdevice.h> -+#include <linux/if_arp.h> -+#include <linux/if_ether.h> -+#include <linux/can.h> -+#include <linux/list.h> -+#include <linux/io.h> -+ -+#include <linux/can/dev.h> -+#include <linux/can/error.h> -+#include "flexcan.h" -+#include <asm/coldfire.h> -+#include <asm/m5485sim.h> -+#include <linux/can/version.h> /* for RCSID. Removed by mkpatch script */ -+RCSID("$Id$"); -+ -+struct flexcan_priv { -+ struct can_priv can; -+ volatile unsigned long flags; -+ u8 shadow_statflg; -+ u8 shadow_canrier; -+ u8 cur_pri; -+ u8 tx_active; -+ -+ struct list_head tx_head; -+ struct napi_struct napi; -+ struct net_device *dev; -+}; -+ -+ -+static int flexcan_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct can_frame *frame = (struct can_frame *)skb->data; -+ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; -+ int i, len; -+ int txbuf = 0; -+ u32 can_id, can_ext, tmp, tmp1; -+ -+ /* Transmission inactive */ -+ regs->cantxfg[txbuf].can_dlc = MB_CNT_CODE(0x08); -+ -+ can_ext = frame->can_id; -+ if (can_ext & CAN_EFF_FLAG) { -+ /* Frame format is extended */ -+ regs->cantxfg[txbuf].can_dlc |= (1 << 21); -+ regs->cantxfg[txbuf].can_dlc |= (1 << 22); -+ can_id = frame->can_id & MB_ID_EXT; -+ if (frame->can_id & CAN_RTR_FLAG) -+ regs->cantxfg[txbuf].can_dlc |= (1 << 20); -+ -+ tmp = (can_id & CAN_SFF_MASK) << 18; -+ tmp1 = can_id >> 11; -+ can_id = tmp | tmp1; -+ regs->cantxfg[txbuf].can_id = can_id; -+ } else { -+ /* Frame format is standard */ -+ can_id = frame->can_id & MB_ID_EXT; -+ if (frame->can_id & CAN_RTR_FLAG) -+ regs->cantxfg[txbuf].can_dlc |= (1 << 20); -+ -+ regs->cantxfg[txbuf].can_id = can_id << 18; -+ } -+ -+ len = 8; -+ for (i = 0; i < len; i++) -+ regs->cantxfg[txbuf].data[i] = frame->data[i]; -+ -+ regs->cantxfg[txbuf].can_dlc |= len << 16; -+ /* Transmission active */ -+ regs->cantxfg[txbuf].can_dlc |= MB_CNT_CODE(0x0c); -+ kfree_skb(skb); -+ return NETDEV_TX_OK; -+} -+ -+static void flexcan_tx_timeout(struct net_device *dev) -+{ -+ struct sk_buff *skb; -+ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; -+ struct can_frame *frame; -+ int length = 8; -+ -+ /* Diable the interrupts */ -+ regs->imask = IMASK_BUFF_DISABLE_ALL; -+ -+ skb = dev_alloc_skb(sizeof(struct can_frame)); -+ if (!skb) { -+ if (printk_ratelimit()) -+ dev_notice(ND2D(dev), "TIMEOUT packet dropped.\n"); -+ return; -+ } -+ frame = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); -+ -+ frame->can_dlc = length; -+ -+ skb->dev = dev; -+ skb->protocol = __constant_htons(ETH_P_CAN); -+ skb->pkt_type = PACKET_BROADCAST; -+ skb->ip_summed = CHECKSUM_UNNECESSARY; -+ -+ netif_rx(skb); -+} -+ -+static irqreturn_t flexcan_isr(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *)dev_id; -+ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; -+ struct net_device_stats *stats = dev->get_stats(dev); -+ struct sk_buff *skb; -+ struct can_frame *frame; -+ u32 iflags, oflags; -+ int i, k; -+ int retval = 1; -+ -+ iflags = regs->iflag; -+ oflags = iflags; -+ for (i = 0; i < 16; i++) { -+ if (iflags & (0x01 << i)) { -+ struct flexcan_mb *mb = ®s->cantxfg[i]; -+ int ctrl = mb->can_dlc; -+ int code = (ctrl >> 24) & 0x0f; -+ int length = (ctrl >> 16) & 0x0f; -+ u32 tmp, tmp1; -+ -+ if (code < 8 && (length > 0)) { -+ /* receive frame */ -+ skb = dev_alloc_skb(sizeof(struct can_frame)); -+ if (!skb) -+ dev_notice(ND2D(dev), -+ "Packets dropped.\n"); -+ skb->dev = dev; -+ frame = (struct can_frame *)skb_put(skb, -+ sizeof(struct can_frame)); -+ -+ frame->can_id &= 0x0; -+ frame->can_dlc = length; -+ tmp1 = mb->can_id & MB_ID_EXT; -+ if (ctrl & MB_CNT_IDE) { -+ tmp = tmp1; -+ tmp = (tmp >> 18) & CAN_SFF_MASK; -+ frame->can_id = (tmp1 << 11) | tmp; -+ frame->can_id &= CAN_EFF_MASK; -+ frame->can_id |= CAN_EFF_FLAG; -+ if (ctrl & MB_CNT_RTR) -+ frame->can_id |= CAN_RTR_FLAG; -+ } else { -+ frame->can_id = tmp1 >> 18; -+ if (ctrl & MB_CNT_RTR) -+ frame->can_id |= CAN_RTR_FLAG; -+ } -+ -+ for (k = 0; k < 8; k++) -+ frame->data[k] = mb->data[k]; -+ -+ mb->can_dlc &= MB_CODE_MASK; -+ mb->can_dlc |= MB_CNT_CODE(0x04); -+ -+ stats->rx_packets++; -+ stats->rx_bytes += frame->can_dlc; -+ skb->dev = dev; -+ skb->protocol = __constant_htons(ETH_P_CAN); -+ skb->ip_summed = CHECKSUM_UNNECESSARY; -+ -+ retval = netif_rx(skb); -+ if (retval == NET_RX_DROP) -+ dev_notice(ND2D(dev), -+ "Packets dropped.\n"); -+ } else { -+ /* transmit frame */ -+ mb->can_dlc = MB_CNT_CODE(0x04); -+ } -+ } -+ } -+ regs->iflag = oflags; -+ -+ return IRQ_HANDLED; -+} -+ -+static int flexcan_do_set_bit_time(struct net_device *dev, -+ struct can_bittime *bt) -+{ -+ struct flexcan_priv *priv = netdev_priv(dev); -+ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; -+ int ret = 0; -+ u32 reg; -+ -+ if (bt->type != CAN_BITTIME_STD) -+ return -EINVAL; -+ -+ spin_lock_irq(&priv->can.irq_lock); -+ -+ reg = CANCTRL_PRESDIV(bt->std.brp) | CANCTRL_PSEG1(bt->std.phase_seg1 -+ - 1) | CANCTRL_PSEG2(bt->std.phase_seg2 - 1); -+ regs->canctrl &= CANCTRL_BITTIME; -+ regs->canctrl |= (reg | CANCTRL_SAMP(bt->std.sam) | -+ CANCTRL_PROPSEG(bt->std.prop_seg - 1)); -+ -+ spin_unlock_irq(&priv->can.irq_lock); -+ return ret; -+} -+ -+ -+static int flexcan_open(struct net_device *dev) -+{ -+ int ret, i, j; -+ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; -+ -+#if defined(CONFIG_M547X_8X) -+ MCF_PAR_TIMER = MCF_PAR_TIMER | 0x28; -+ MCF_PAR_TIMER = MCF_PAR_TIMER & 0xf8; -+ MCF_PAR_DSPI = MCF_PAR_DSPI | 0x0a00; -+ MCF_PAR_FECI2CIRQ = MCF_PAR_FECI2CIRQ | 0x0283; -+ MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) & 0x0f; -+ MCF_PAR_PSCn(2) = MCF_PAR_PSCn(2) | 0x50; -+#endif -+ -+ regs->canmcr |= CANMCR_SOFTRST; -+ regs->canmcr |= CANMCR_MDIS; -+ udelay(10); -+ -+ if ((regs->canmcr & CANMCR_SOFTRST) != 0x0) { -+ dev_err(ND2D(dev), "Failed to softreset can module.\n"); -+ return -1; -+ } -+ -+ /* Enable error and bus off interrupt */ -+ regs->canctrl |= (CANCTRL_RJW(3) | CANCTRL_ERRMSK | -+ CANCTRL_BOFFMSK); -+ -+ /* Set lowest buffer transmitted first */ -+ regs->canctrl |= CANCTRL_LBUF; -+ -+ for (i = 0; i < 16; i++) { -+ regs->cantxfg[i].can_dlc = 0; -+ regs->cantxfg[i].can_id = 0; -+ for (j = 0; j < 8; j++) -+ regs->cantxfg[i].data[j] = 0; -+ -+ /* Put MB into rx queue */ -+ regs->cantxfg[i].can_dlc = MB_CNT_CODE(0x04); -+ } -+ -+ /* acceptance mask/acceptance code (accept everything) */ -+ regs->rxgmask = 0x00000000; -+ regs->rx14mask = 0x00000000; -+ regs->rx15mask = 0x00000000; -+ /* extended frame */ -+ regs->cantxfg[14].can_dlc |= 0x600000; -+ /* Enable flexcan module */ -+ regs->canmcr &= ~CANMCR_MDIS; -+ /* Synchronize with the can bus */ -+ regs->canmcr &= ~CANMCR_HALT; -+ -+#if defined(CONFIG_M547X_8X) -+ for (i = 0; i < 2; i++) { -+ MCF_ICR(ISC_CANn_MBOR(i)) = 0x33; -+ MCF_ICR(ISC_CANn_ERR(i)) = 0x33; -+ MCF_ICR(ISC_CANn_BUSOFF(i)) = 0x33; -+ } -+ -+ ret = request_irq(dev->irq + 64, flexcan_isr, IRQF_DISABLED, -+ dev->name, dev); -+ ret = request_irq(dev->irq + 1 + 64, flexcan_isr, IRQF_DISABLED, -+ dev->name, dev); -+ ret = request_irq(dev->irq + 2 + 64, flexcan_isr, IRQF_DISABLED, -+ dev->name, dev); -+ if (ret < 0) { -+ printk(KERN_ERR "%s - failed to attach interrupt.\n", -+ dev->name); -+ return ret; -+ } -+#endif -+ -+ /* Enable all interrupts */ -+ regs->imask = IMASK_BUFF_ENABLE_ALL; -+ netif_start_queue(dev); -+ return 0; -+} -+ -+static int flexcan_close(struct net_device *dev) -+{ -+ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; -+ -+ netif_stop_queue(dev); -+ -+ /* Disable all interrupts */ -+ regs->imask = IMASK_BUFF_DISABLE_ALL; -+ free_irq(dev->irq + 64, dev); -+ free_irq(dev->irq + 1 + 64, dev); -+ free_irq(dev->irq + 2 + 64, dev); -+ -+ /* Disable module */ -+ regs->canmcr |= CANMCR_MDIS; -+ return 0; -+} -+ -+int register_flexcandev(struct net_device *dev, int clock_src) -+{ -+ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; -+ -+ regs->canmcr &= ~CANMCR_MDIS; -+ udelay(100); -+ regs->canmcr |= (CANMCR_FRZ | CANMCR_HALT); -+ return register_netdev(dev); -+} -+EXPORT_SYMBOL(register_flexcandev); -+ -+void unregister_flexcandev(struct net_device *dev) -+{ -+ struct flexcan_regs *regs = (struct flexcan_regs *)dev->base_addr; -+ -+ regs->canmcr |= (CANMCR_FRZ | CANMCR_HALT); -+ regs->canmcr |= CANMCR_MDIS; -+ -+ unregister_netdev(dev); -+} -+EXPORT_SYMBOL(unregister_flexcandev); -+ -+struct net_device *alloc_flexcandev(void) -+{ -+ struct net_device *dev; -+ struct flexcan_priv *priv; -+ -+ dev = alloc_candev(sizeof(struct flexcan_priv)); -+ if (!dev) -+ return NULL; -+ -+ priv = netdev_priv(dev); -+ priv->dev = dev; -+ dev->open = flexcan_open; -+ dev->stop = flexcan_close; -+ dev->hard_start_xmit = flexcan_hard_start_xmit; -+ dev->tx_timeout = flexcan_tx_timeout; -+ dev->flags |= IFF_NOARP; -+ priv->can.do_set_bit_time = flexcan_do_set_bit_time; -+ return dev; -+} -+EXPORT_SYMBOL(alloc_flexcandev); -+ -+MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>"); -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("CAN port driver for flexcan based chip"); ---- /dev/null -+++ b/drivers/net/can/flexcan/flexcan.h -@@ -0,0 +1,148 @@ -+/* -+ * flexcan.h -+ * -+ * DESCRIPTION: -+ * Definitions of consts/structs to drive the Freescale FLEXCAN. -+ * -+ */ -+ -+#ifndef __FLEXCAN_H__ -+#define __FLEXCAN_H__ -+ -+#include <linux/autoconf.h> -+#include <linux/types.h> -+ -+/* FLEXCAN module configuration register (CANMCR) bits */ -+#define CANMCR_MDIS 0x80000000 -+#define CANMCR_FRZ 0x40000000 -+#define CANMCR_HALT 0x10000000 -+#define CANMCR_SOFTRST 0x02000000 -+#define CANMCR_FRZACK 0x01000000 -+#define CANMCR_SUPV 0x00800000 -+#define CANMCR_MAXMB(x) ((x)&0x0f) -+ -+/* FLEXCAN control register (CANCTRL) bits */ -+#define CANCTRL_PRESDIV(x) (((x)&0xff)<<24) -+#define CANCTRL_RJW(x) (((x)&0x03)<<22) -+#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) -+#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) -+#define CANCTRL_BOFFMSK 0x00008000 -+#define CANCTRL_ERRMSK 0x00004000 -+#define CANCTRL_LPB 0x00001000 -+#define CANCTRL_SAMP(x) (((x)&0x1)<<7) -+#define CANCTRL_BOFFREC 0x00000040 -+#define CANCTRL_TSYNC 0x00000020 -+#define CANCTRL_LBUF 0x00000010 -+#define CANCTRL_LOM 0x00000008 -+#define CANCTRL_PROPSEG(x) ((x)&0x07) -+#define CANCTRL_BITTIME 0x00c0d078 -+ -+/* FLEXCAN error counter register (ERRCNT) bits */ -+#define ERRCNT_REXECTR(x) (((x)&0xff)<<8) -+#define ERRCNT_TXECTR(x) ((x)&0xff) -+ -+/* FLEXCAN error and status register (ERRSTAT) bits */ -+#define ERRSTAT_BITERR(x) (((x)&0x03)<<14) -+#define ERRSTAT_ACKERR 0x00002000 -+#define ERRSTAT_CRCERR 0x00001000 -+#define ERRSTAT_FRMERR 0x00000800 -+#define ERRSTAT_STFERR 0x00000400 -+#define ERRSTAT_TXWRN 0x00000200 -+#define ERRSTAT_RXWRN 0x00000100 -+#define ERRSTAT_IDLE 0x00000080 -+#define ERRSTAT_TXRX 0x00000040 -+#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) -+#define ERRSTAT_BOFFINT 0x00000004 -+#define ERRSTAT_ERRINT 0x00000002 -+ -+/* FLEXCAN interrupt mask register (IMASK) bits */ -+#define IMASK_BUF15M 0x8000 -+#define IMASK_BUF14M 0x4000 -+#define IMASK_BUF13M 0x2000 -+#define IMASK_BUF12M 0x1000 -+#define IMASK_BUF11M 0x0800 -+#define IMASK_BUF10M 0x0400 -+#define IMASK_BUF9M 0x0200 -+#define IMASK_BUF8M 0x0100 -+#define IMASK_BUF7M 0x0080 -+#define IMASK_BUF6M 0x0040 -+#define IMASK_BUF5M 0x0020 -+#define IMASK_BUF4M 0x0010 -+#define IMASK_BUF3M 0x0008 -+#define IMASK_BUF2M 0x0004 -+#define IMASK_BUF1M 0x0002 -+#define IMASK_BUF0M 0x0001 -+#define IMASK_BUFnM(x) (0x1<<(x)) -+#define IMASK_BUFF_ENABLE_ALL 0xffff -+#define IMASK_BUFF_DISABLE_ALL 0x0000 -+ -+/* FLEXCAN interrupt flag register (IFLAG) bits */ -+#define IFLAG_BUF15M 0x8000 -+#define IFLAG_BUF14M 0x4000 -+#define IFLAG_BUF13M 0x2000 -+#define IFLAG_BUF12M 0x1000 -+#define IFLAG_BUF11M 0x0800 -+#define IFLAG_BUF10M 0x0400 -+#define IFLAG_BUF9M 0x0200 -+#define IFLAG_BUF8M 0x0100 -+#define IFLAG_BUF7M 0x0080 -+#define IFLAG_BUF6M 0x0040 -+#define IFLAG_BUF5M 0x0020 -+#define IFLAG_BUF4M 0x0010 -+#define IFLAG_BUF3M 0x0008 -+#define IFLAG_BUF2M 0x0004 -+#define IFLAG_BUF1M 0x0002 -+#define IFLAG_BUF0M 0x0001 -+#define IFLAG_BUFnM(x) (0x1<<(x)) -+#define IFLAG_BUFF_SET_ALL 0xffff -+#define IFLAG_BUFF_DISABLE_ALL 0x0000 -+ -+/* FLEXCAN message buffers */ -+#define MB_CNT_CODE(x) (((x)&0x0f)<<24) -+#define MB_CNT_SRR 0x00400000 -+#define MB_CNT_IDE 0x00200000 -+#define MB_CNT_RTR 0x00100000 -+#define MB_CNT_LENGTH(x) (((x)&0x0f)<<16) -+#define MB_CNT_TIMESTAMP(x) ((x)&0xffff) -+ -+#define MB_ID_STD ((0x7ff)<<18) -+#define MB_ID_EXT 0x1fffffff -+#define MB_CODE_MASK 0xf0ffffff -+ -+/* Structure of the message buffer */ -+struct flexcan_mb { -+ u32 can_dlc; -+ u32 can_id; -+ u8 data[8]; -+}; -+ -+/* Structure of the hardware registers */ -+struct flexcan_regs { -+ u32 canmcr; -+ u32 canctrl; -+ u32 timer; -+ u32 reserved1; -+ u32 rxgmask; -+ u32 rx14mask; -+ u32 rx15mask; -+ u32 errcnt; -+ u32 errstat; -+ u32 reserved2; -+ u32 imask; -+ u32 reserved3; -+ u32 iflag; -+ u32 reserved4[19]; -+ struct flexcan_mb cantxfg[16]; -+}; -+ -+struct flexcan_platform_data { -+ u8 clock_src; /* FLEXCAN clock source CRIN or SYSCLK */ -+ u32 clock_frq; /* can ref. clock, in Hz */ -+}; -+ -+struct net_device *alloc_flexcandev(void); -+ -+extern int register_flexcandev(struct net_device *dev, int clock_src); -+extern void unregister_flexcandev(struct net_device *dev); -+ -+#endif /* __FLEXCAN_H__ */ ---- /dev/null -+++ b/drivers/net/can/flexcan/Makefile -@@ -0,0 +1,5 @@ -+ -+obj-$(CONFIG_CAN_MCF547X_8X) += flexcan-mcf548x.o -+ -+flexcan-mcf548x-objs := flexcan.o mcf548x_can.o -+ ---- /dev/null -+++ b/drivers/net/can/flexcan/mcf548x_can.c -@@ -0,0 +1,213 @@ -+/* -+ * DESCRIPTION: -+ * CAN bus driver for the Freescale MCF548x embedded CPU. -+ * -+ * AUTHOR: -+ * Andrey Volkov <avolkov@varma-el.com> -+ * -+ * COPYRIGHT: -+ * 2004-2005, Varma Electronics Oy -+ * -+ * LICENCE: -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ * HISTORY: -+ * 2008-06-23 support for MCF548x's FlexCAN -+ * Huan, Wang <b18965@freescale.com> -+ * 2005-02-03 created -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+#include <linux/netdevice.h> -+#include <linux/can.h> -+#include <linux/can/dev.h> -+#include <linux/io.h> -+ -+#include "flexcan.h" -+#include <asm/coldfire.h> -+#include <asm/m5485sim.h> -+#include <linux/can/version.h> /* for RCSID. Removed by mkpatch script */ -+ -+RCSID("$Id$"); -+ -+#define PDEV_MAX 2 -+ -+struct platform_device *pdev[PDEV_MAX]; -+ -+static int __devinit mcf548x_can_probe(struct platform_device *pdev) -+{ -+ struct resource *mem; -+ struct net_device *dev; -+ struct flexcan_platform_data *pdata = pdev->dev.platform_data; -+ struct can_priv *can; -+ u32 mem_size; -+ int ret = -ENODEV; -+ -+ if (!pdata) -+ return ret; -+ -+ dev = alloc_flexcandev(); -+ if (!dev) -+ return -ENOMEM; -+ can = netdev_priv(dev); -+ -+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ dev->irq = platform_get_irq(pdev, 0); -+ if (!mem || !dev->irq) -+ goto req_error; -+ -+ mem_size = mem->end - mem->start + 1; -+ if (!request_mem_region(mem->start, mem_size, pdev->dev.driver->name)) { -+ dev_err(&pdev->dev, "resource unavailable\n"); -+ goto req_error; -+ } -+ SET_NETDEV_DEV(dev, &pdev->dev); -+ -+ dev->base_addr = (unsigned long)ioremap_nocache(mem->start, mem_size); -+ if (!dev->base_addr) { -+ dev_err(&pdev->dev, "failed to map can port\n"); -+ ret = -ENOMEM; -+ goto fail_map; -+ } -+ can->can_sys_clock = pdata->clock_frq; -+ platform_set_drvdata(pdev, dev); -+ ret = register_flexcandev(dev, pdata->clock_src); -+ if (ret >= 0) { -+ dev_info(&pdev->dev, "probe for port 0x%lX done\n", -+ dev->base_addr); -+ return ret; -+ } -+ -+ iounmap((unsigned long *)dev->base_addr); -+fail_map: -+ release_mem_region(mem->start, mem_size); -+req_error: -+ free_candev(dev); -+ dev_err(&pdev->dev, "probe failed\n"); -+ return ret; -+} -+ -+static int __devexit mcf548x_can_remove(struct platform_device *pdev) -+{ -+ struct net_device *dev = platform_get_drvdata(pdev); -+ struct resource *mem; -+ -+ platform_set_drvdata(pdev, NULL); -+ unregister_flexcandev(dev); -+ iounmap((unsigned long *)dev->base_addr); -+ -+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ release_mem_region(mem->start, mem->end - mem->start + 1); -+ free_candev(dev); -+ return 0; -+} -+ -+static struct platform_driver mcf548x_can_driver = { -+ .driver = { -+ .name = "mcf548x-flexcan", -+ }, -+ .probe = mcf548x_can_probe, -+ .remove = __devexit_p(mcf548x_can_remove), -+}; -+ -+static struct resource mcf548x_can0_resources[] = { -+ [0] = { -+ .start = MCF_MBAR + 0x0000A000, -+ .end = MCF_MBAR + 0x0000A7FF, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = 49, -+ .end = 49, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct resource mcf548x_can1_resources[] = { -+ [0] = { -+ .start = MCF_MBAR + 0x0000A800, -+ .end = MCF_MBAR + 0x0000AFFF, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = 55, -+ .end = 55, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+ -+static int __init mcf548x_of_to_pdev(void) -+{ -+ unsigned int i; -+ int err = -ENODEV; -+ struct flexcan_platform_data pdata; -+ -+ pdev[0] = platform_device_register_simple("mcf548x-flexcan", 0, -+ mcf548x_can0_resources, 2); -+ if (IS_ERR(pdev[0])) { -+ err = PTR_ERR(pdev[0]); -+ return err; -+ } -+ pdev[1] = platform_device_register_simple("mcf548x-flexcan", 1, -+ mcf548x_can1_resources, 2); -+ if (IS_ERR(pdev[1])) { -+ err = PTR_ERR(pdev[1]); -+ return err; -+ } -+ -+ /* FlexCAN clock */ -+ pdata.clock_frq = 100000000; -+ -+ for (i = 0; i < PDEV_MAX; i++) { -+ err = platform_device_add_data(pdev[i], &pdata, sizeof(pdata)); -+ if (err) -+ return err; -+ } -+ return err; -+} -+ -+int __init mcf548x_can_init(void) -+{ -+ int err = mcf548x_of_to_pdev(); -+ -+ if (err) { -+ printk(KERN_ERR "%s init failed with err=%d\n", -+ mcf548x_can_driver.driver.name, err); -+ return err; -+ } -+ -+ return platform_driver_register(&mcf548x_can_driver); -+} -+ -+void __exit mcf548x_can_exit(void) -+{ -+ int i; -+ platform_driver_unregister(&mcf548x_can_driver); -+ for (i = 0; i < PDEV_MAX; i++) -+ platform_device_unregister(pdev[i]); -+} -+ -+module_init(mcf548x_can_init); -+module_exit(mcf548x_can_exit); -+ -+MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>"); -+MODULE_DESCRIPTION("Freescale MCF548x CAN driver"); -+MODULE_LICENSE("GPL v2"); ---- a/drivers/net/can/Kconfig -+++ b/drivers/net/can/Kconfig -@@ -12,6 +12,19 @@ config CAN_VCAN - This driver can also be built as a module. If so, the module - will be called vcan. - -+config CAN_FLEXCAN -+ tristate "Support for Freescale FLEXCAN based chips" -+ depends on CAN && (PPC || M68K || M68KNOMMU) -+ ---help--- -+ Say Y here if you want to support for Freescale FlexCAN. -+ -+config CAN_MCF547X_8X -+ tristate "Freescale MCF547X/MCF548X onboard CAN controller" -+ depends on CAN_FLEXCAN && (M547X || M548X) -+ ---help--- -+ Say Y here if you want to support for Freescale MCF547x/MCF548x -+ onboard dualCAN controller. -+ - config CAN_DEBUG_DEVICES - bool "CAN devices debugging messages" - depends on CAN ---- a/drivers/net/can/Makefile -+++ b/drivers/net/can/Makefile -@@ -3,3 +3,4 @@ - # - - obj-$(CONFIG_CAN_VCAN) += vcan.o -+obj-$(CONFIG_CAN_FLEXCAN) += flexcan/ ---- /dev/null -+++ b/drivers/net/fec/fec.c -@@ -0,0 +1,1306 @@ -+/* -+ * Performance and stability improvements: (C) Copyright 2008, -+ * Daniel Krueger, SYSTEC electronic GmbH -+ * -+ * Code crunched to get it to work on 2.6.24 -- FEC cleanup coming -+ * soon -- Kurt Mahan -+ */ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/ptrace.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/slab.h> -+#include <linux/interrupt.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/skbuff.h> -+#include <linux/spinlock.h> -+#include <linux/workqueue.h> -+#include <linux/bitops.h> -+ -+#include <asm/coldfire.h> -+#include <asm/mcfsim.h> -+ -+#include <asm/dma.h> -+#include <asm/MCD_dma.h> -+#include <asm/m5485sram.h> -+#include <asm/virtconvert.h> -+#include <asm/irq.h> -+ -+#include "fec.h" -+#include "ks8721.h" -+ -+#ifdef CONFIG_FEC_548x_ENABLE_FEC2 -+#define FEC_MAX_PORTS 2 -+#define FEC_2 -+#else -+#define FEC_MAX_PORTS 1 -+#undef FEC_2 -+#endif -+ -+#define VERSION "0.20" -+MODULE_DESCRIPTION( "DMA Fast Ethernet Controller driver ver " VERSION); -+ -+/* fec private */ -+struct fec_priv { -+ struct net_device *netdev; /* owning net device */ -+ void* fecpriv_txbuf[FEC_TX_BUF_NUMBER]; /* tx buffer ptrs */ -+ MCD_bufDescFec *fecpriv_txdesc; /* tx descriptor ptrs */ -+ volatile unsigned int fecpriv_current_tx; /* current tx desc index */ -+ volatile unsigned int fecpriv_next_tx; /* next tx desc index */ -+ unsigned int fecpriv_current_rx; /* current rx desc index */ -+ MCD_bufDescFec *fecpriv_rxdesc; /* rx descriptor ptrs */ -+ struct sk_buff *askb_rx[FEC_RX_BUF_NUMBER]; /* rx SKB ptrs */ -+ unsigned int fecpriv_initiator_rx; /* rx dma initiator */ -+ unsigned int fecpriv_initiator_tx; /* tx dma initiator */ -+ int fecpriv_fec_rx_channel; /* rx dma channel */ -+ int fecpriv_fec_tx_channel; /* tx dma channel */ -+ int fecpriv_rx_requestor; /* rx dma requestor */ -+ int fecpriv_tx_requestor; /* tx dma requestor */ -+ void *fecpriv_interrupt_fec_rx_handler; /* dma rx handler */ -+ void *fecpriv_interrupt_fec_tx_handler; /* dma tx handler */ -+ unsigned char *fecpriv_mac_addr; /* private fec mac addr */ -+ struct net_device_stats fecpriv_stat; /* stats ptr */ -+ spinlock_t fecpriv_lock; -+ int fecpriv_rxflag; -+ struct tasklet_struct fecpriv_tasklet_reinit; -+ int index; /* fec hw number */ -+}; -+ -+struct net_device *fec_dev[FEC_MAX_PORTS]; -+ -+/* FEC functions */ -+int __init fec_init(void); -+struct net_device_stats *fec_get_stat(struct net_device *dev); -+int fec_open(struct net_device *dev); -+int fec_close(struct net_device *nd); -+int fec_tx(struct sk_buff *skb, struct net_device *dev); -+void fec_set_multicast_list(struct net_device *nd); -+int fec_set_mac_address(struct net_device *dev, void *p); -+void fec_tx_timeout(struct net_device *dev); -+void fec_interrupt_fec_tx_handler(struct net_device *dev); -+void fec_interrupt_fec_rx_handler(struct net_device *dev); -+irqreturn_t fec_interrupt_handler(int irq, void *dev_id); -+void fec_interrupt_fec_tx_handler_fec0(void); -+void fec_interrupt_fec_rx_handler_fec0(void); -+void fec_interrupt_fec_reinit(unsigned long data); -+ -+/* default fec0 address */ -+unsigned char fec_mac_addr_fec0[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x50 }; -+ -+#ifdef FEC_2 -+/* default fec1 address */ -+unsigned char fec_mac_addr_fec1[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x51 }; -+#endif -+ -+extern unsigned char uboot_enet0[]; -+extern unsigned char uboot_enet1[]; -+ -+#ifndef MODULE -+int fec_str_to_mac( char *str_mac, unsigned char* addr); -+int __init fec_mac_setup0 (char *s); -+#endif -+ -+ -+#ifdef FEC_2 -+void fec_interrupt_fec_tx_handler_fec1(void); -+void fec_interrupt_fec_rx_handler_fec1(void); -+#endif -+ -+#ifndef MODULE -+int __init fec_mac_setup1 (char *s); -+#endif -+ -+int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data); -+int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data); -+ -+module_init(fec_init); -+/* module_exit(fec_cleanup); */ -+ -+__setup("mac0=", fec_mac_setup0); -+ -+#ifdef FEC_2 -+__setup("mac1=", fec_mac_setup1); -+#endif -+ -+/* -+ * Initialize a FEC device -+ */ -+int fec_enet_init(struct net_device *dev) -+{ -+ static int index = 0; -+ struct fec_priv *fp = netdev_priv(dev); -+ int i; -+ -+ fp->index = index; -+ fp->netdev = dev; -+ fec_dev[ index ] = dev; -+ -+ if (index == 0) { -+ /* disable fec0 */ -+ FEC_ECR(FEC_BASE_ADDR_FEC0) = FEC_ECR_DISABLE; -+ -+ /* setup the interrupt handler */ -+ dev->irq = 64 + ISC_FEC0; -+ -+ if (request_irq(dev->irq, fec_interrupt_handler, -+ IRQF_DISABLED, "ColdFire FEC 0", dev)) { -+ dev->irq = 0; -+ printk("Cannot allocate FEC0 IRQ\n"); -+ } else { -+ /* interrupt priority and level */ -+ MCF_ICR(ISC_FEC0) = ILP_FEC0; -+ } -+ -+ /* fec base address */ -+ dev->base_addr = FEC_BASE_ADDR_FEC0; -+ -+ /* requestor numbers */ -+ fp->fecpriv_rx_requestor = DMA_FEC0_RX; -+ fp->fecpriv_tx_requestor = DMA_FEC0_TX; -+ -+ /* fec0 handlers */ -+ fp->fecpriv_interrupt_fec_rx_handler = fec_interrupt_fec_rx_handler_fec0; -+ fp->fecpriv_interrupt_fec_tx_handler = fec_interrupt_fec_tx_handler_fec0; -+ -+ /* tx descriptors */ -+ fp->fecpriv_txdesc = (void*)FEC_TX_DESC_FEC0; -+ -+ /* rx descriptors */ -+ fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC0; -+ -+ /* mac addr */ -+ if (uboot_enet0[0] || uboot_enet0[1] || uboot_enet0[2] || -+ uboot_enet0[3] || uboot_enet0[4] || uboot_enet0[5]) { -+ /* use uboot enet 0 addr */ -+ memcpy(fec_mac_addr_fec0, uboot_enet0, 6); -+ } -+ -+ fp->fecpriv_mac_addr = fec_mac_addr_fec0; -+ } -+ else { -+ /* disable fec1 */ -+ FEC_ECR(FEC_BASE_ADDR_FEC1) = FEC_ECR_DISABLE; -+#ifdef FEC_2 -+ /* setup the interrupt handler */ -+ dev->irq = 64 + ISC_FEC1; -+ -+ if (request_irq(dev->irq, fec_interrupt_handler, -+ IRQF_DISABLED, "ColdFire FEC 1", dev)) { -+ dev->irq = 0; -+ printk("Cannot allocate FEC1 IRQ\n"); -+ } else { -+ /* interrupt priority and level */ -+ MCF_ICR(ISC_FEC1) = ILP_FEC1; -+ } -+ -+ /* fec base address */ -+ dev->base_addr = FEC_BASE_ADDR_FEC1; -+ -+ /* requestor numbers */ -+ fp->fecpriv_rx_requestor = DMA_FEC1_RX; -+ fp->fecpriv_tx_requestor = DMA_FEC1_TX; -+ -+ /* fec1 handlers */ -+ fp->fecpriv_interrupt_fec_rx_handler = fec_interrupt_fec_rx_handler_fec1; -+ fp->fecpriv_interrupt_fec_tx_handler = fec_interrupt_fec_tx_handler_fec1; -+ -+ /* tx descriptors */ -+ fp->fecpriv_txdesc = (void*)FEC_TX_DESC_FEC1; -+ -+ /* rx descriptors */ -+ fp->fecpriv_rxdesc = (void*)FEC_RX_DESC_FEC1; -+ -+ /* mac addr */ -+ if (uboot_enet1[0] || uboot_enet1[1] || uboot_enet1[2] || -+ uboot_enet1[3] || uboot_enet1[4] || uboot_enet1[5]) { -+ /* use uboot enet 1 addr */ -+ memcpy(fec_mac_addr_fec1, uboot_enet1, 6); -+ } -+ fp->fecpriv_mac_addr = fec_mac_addr_fec1; -+#endif -+ } -+ -+ /* clear MIB */ -+ memset((void *) (dev->base_addr + 0x200), 0, FEC_MIB_LEN); -+ -+ /* clear the statistics structure */ -+ memset((void *) &(fp->fecpriv_stat), 0, -+ sizeof(struct net_device_stats)); -+ -+ /* grab the FEC initiators */ -+ dma_set_initiator(fp->fecpriv_tx_requestor); -+ fp->fecpriv_initiator_tx = dma_get_initiator(fp->fecpriv_tx_requestor); -+ dma_set_initiator(fp->fecpriv_rx_requestor); -+ fp->fecpriv_initiator_rx = dma_get_initiator(fp->fecpriv_rx_requestor); -+ -+ /* reset the DMA channels */ -+ fp->fecpriv_fec_rx_channel = -1; -+ fp->fecpriv_fec_tx_channel = -1; -+ -+ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) -+ fp->askb_rx[i] = NULL; -+ -+ /* initialize the pointers to the socket buffers */ -+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) -+ fp->fecpriv_txbuf[i] = NULL; -+ -+ ether_setup(dev); -+ -+ dev->open = fec_open; -+ dev->stop = fec_close; -+ dev->hard_start_xmit = fec_tx; -+ dev->get_stats = fec_get_stat; -+ dev->set_multicast_list = fec_set_multicast_list; -+ dev->set_mac_address = fec_set_mac_address; -+ dev->tx_timeout = fec_tx_timeout; -+ dev->watchdog_timeo = FEC_TX_TIMEOUT * HZ; -+ -+ memcpy(dev->dev_addr, fp->fecpriv_mac_addr, ETH_ALEN); -+ -+ spin_lock_init(&fp->fecpriv_lock); -+ -+ // Initialize FEC/I2C/IRQ Pin Assignment Register -+ FEC_GPIO_PAR_FECI2CIRQ &= 0xF; -+ FEC_GPIO_PAR_FECI2CIRQ |= FEC_FECI2CIRQ; -+ -+ index++; -+ return 0; -+} -+ -+/* -+ * Module Initialization -+ */ -+int __init fec_init(void) -+{ -+ struct net_device *dev; -+ int i; -+ int err; -+ DECLARE_MAC_BUF(mac); -+ -+ printk(KERN_INFO "FEC ENET (DMA) Version %s\n", VERSION); -+ -+ for (i = 0; i < FEC_MAX_PORTS; i++) { -+ dev = alloc_etherdev(sizeof(struct fec_priv)); -+ if (!dev) -+ return -ENOMEM; -+ err = fec_enet_init(dev); -+ if (err) { -+ free_netdev(dev); -+ continue; -+ } -+ if (register_netdev(dev) != 0) { -+ free_netdev(dev); -+ return -EIO; -+ } -+ -+ printk(KERN_INFO "%s: ethernet %s\n", -+ dev->name, print_mac(mac, dev->dev_addr)); -+ } -+ return 0; -+} -+ -+/* -+ * Stop a device -+ */ -+void fec_stop(struct net_device *dev) -+{ -+ struct fec_priv *fp = netdev_priv(dev); -+ -+ dma_remove_initiator(fp->fecpriv_initiator_tx); -+ dma_remove_initiator(fp->fecpriv_initiator_rx); -+ -+ if (dev->irq) -+ free_irq(dev->irq, dev); -+} -+ -+/************************************************************************ -+* NAME: fec_open -+* -+* DESCRIPTION: This function performs the initialization of -+* of FEC and corresponding KS8721 transiver -+* -+* RETURNS: If no error occurs, this function returns zero. -+*************************************************************************/ -+int fec_open(struct net_device *dev) -+{ -+ struct fec_priv *fp = netdev_priv(dev); -+ unsigned long base_addr = (unsigned long) dev->base_addr; -+ int fduplex; -+ int i; -+ int channel; -+ int error_code = -EBUSY; -+ -+ /* Receive the DMA channels */ -+ channel = dma_set_channel_fec(fp->fecpriv_rx_requestor); -+ -+ if (channel == -1) { -+ printk("Dma channel cannot be reserved\n"); -+ goto ERRORS; -+ } -+ -+ fp->fecpriv_fec_rx_channel = channel; -+ -+ dma_connect(channel, (int) fp->fecpriv_interrupt_fec_rx_handler); -+ -+ channel = dma_set_channel_fec(fp->fecpriv_tx_requestor); -+ -+ if (channel == -1) { -+ printk("Dma channel cannot be reserved\n"); -+ goto ERRORS; -+ } -+ -+ fp->fecpriv_fec_tx_channel = channel; -+ -+ dma_connect(channel, (int) fp->fecpriv_interrupt_fec_tx_handler); -+ -+ /* init tasklet for controller reinitialization */ -+ tasklet_init(&fp->fecpriv_tasklet_reinit, fec_interrupt_fec_reinit, (unsigned long) dev); -+ -+ /* Reset FIFOs */ -+ FEC_FECFRST(base_addr) |= FEC_SW_RST | FEC_RST_CTL; -+ FEC_FECFRST(base_addr) &= ~FEC_SW_RST; -+ -+ /* Reset and disable FEC */ -+ FEC_ECR(base_addr) = FEC_ECR_RESET; -+ -+ udelay(10); -+ -+ /* Clear all events */ -+ FEC_EIR(base_addr) = FEC_EIR_CLEAR; -+ -+ /* Reset FIFO status */ -+ FEC_FECTFSR(base_addr) = FEC_FECTFSR_MSK; -+ FEC_FECRFSR(base_addr) = FEC_FECRFSR_MSK; -+ -+ /* Set the default address */ -+ FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) | -+ (fp->fecpriv_mac_addr[1] << 16) | -+ (fp->fecpriv_mac_addr[2] << 8) | -+ fp->fecpriv_mac_addr[3]; -+ FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) | -+ (fp->fecpriv_mac_addr[5] << 16) | 0x8808; -+ -+ /* Reset the group address descriptor */ -+ FEC_GALR(base_addr) = 0x00000000; -+ FEC_GAUR(base_addr) = 0x00000000; -+ -+ /* Reset the individual address descriptor */ -+ FEC_IALR(base_addr) = 0x00000000; -+ FEC_IAUR(base_addr) = 0x00000000; -+ -+ /* Set the receive control register */ -+ FEC_RCR(base_addr) = FEC_RCR_MAX_FRM_SIZE | FEC_RCR_MII; -+ -+ /* Set the receive FIFO control register */ -+// FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR | FEC_FECRFCR_MSK; -+ FEC_FECRFCR(base_addr) = FEC_FECRFCR_FRM | FEC_FECRFCR_GR -+ | (FEC_FECRFCR_MSK // disable all but ... -+ & ~FEC_FECRFCR_FAE // enable frame accept error -+ & ~FEC_FECRFCR_RXW // enable receive wait condition -+// & ~FEC_FECRFCR_UF // enable FIFO underflow -+ ); -+ -+ /* Set the receive FIFO alarm register */ -+ FEC_FECRFAR(base_addr) = FEC_FECRFAR_ALARM; -+ -+ /* Set the transmit FIFO control register */ -+// FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR | FEC_FECTFCR_MSK; -+ FEC_FECTFCR(base_addr) = FEC_FECTFCR_FRM | FEC_FECTFCR_GR -+ | (FEC_FECTFCR_MSK // disable all but ... -+ & ~FEC_FECTFCR_FAE // enable frame accept error -+// & ~FEC_FECTFCR_TXW // enable transmit wait condition -+// & ~FEC_FECTFCR_UF // enable FIFO underflow -+ & ~FEC_FECTFCR_OF); // enable FIFO overflow -+ -+ /* Set the transmit FIFO alarm register */ -+ FEC_FECTFAR(base_addr) = FEC_FECTFAR_ALARM; -+ -+ /* Set the Tx FIFO watermark */ -+ FEC_FECTFWR(base_addr) = FEC_FECTFWR_XWMRK; -+ -+ /* Enable the transmitter to append the CRC */ -+ FEC_CTCWR(base_addr) = FEC_CTCWR_TFCW_CRC; -+ -+ /* Enable the ethernet interrupts */ -+// FEC_EIMR(base_addr) = FEC_EIMR_MASK; -+ FEC_EIMR(base_addr) = FEC_EIMR_DISABLE -+ | FEC_EIR_LC -+ | FEC_EIR_RL -+ | FEC_EIR_HBERR -+ | FEC_EIR_XFUN -+ | FEC_EIR_XFERR -+ | FEC_EIR_RFERR -+ ; -+ -+/* -+ * JKM -- -+ * -+ * There's a problem with the PHY initialization code -- -+ * for now assume uboot left it in an initialized state. -+ */ -+// printk(KERN_INFO "FECOPEN: starting auto-negotiation\n"); -+// #ifdef CONFIG_FEC_548x_AUTO_NEGOTIATION -+#if 0 -+ if ((error_code = init_transceiver(base_addr, &fduplex)) != 0) -+ { -+ printk("Initialization of the transceiver is failed\n"); -+ goto ERRORS; -+ } -+#else -+ fduplex = 1; -+#endif -+// printk(KERN_INFO "FECOPEN: done with auto-negotiation\n"); -+ -+ if (fduplex) -+ /* Enable the full duplex mode */ -+ FEC_TCR(base_addr) = FEC_TCR_FDEN | FEC_TCR_HBC; -+ else -+ /* Disable reception of frames while transmitting */ -+ FEC_RCR(base_addr) |= FEC_RCR_DRT; -+ -+ /* Enable MIB */ -+ FEC_MIBC(base_addr) = FEC_MIBC_ENABLE; -+ -+ /* Enable FEC */ -+ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN; -+ -+ /* Initialize tx descriptors and start DMA for the transmission */ -+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) -+ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT; -+ -+ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP; -+ -+ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0; -+ -+ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0, -+ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0, -+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx, -+ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT, -+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); -+ -+ /* Initialize rx descriptors and start DMA for the reception */ -+ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) { -+ fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_DMA); -+ if (!fp->askb_rx[i]) { -+ fp->fecpriv_rxdesc[i].dataPointer = 0; -+ fp->fecpriv_rxdesc[i].statCtrl = 0; -+ fp->fecpriv_rxdesc[i].length = 0; -+ } -+ else { -+ skb_reserve(fp->askb_rx[i], 16); -+ fp->askb_rx[i]->dev = dev; -+ fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail); -+ fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT; -+ fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE; -+ } -+ } -+ -+ fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP; -+ fp->fecpriv_current_rx = 0; -+ -+ /* flush entire data cache before restarting the DMA */ -+#if 0 -+/* JKM -- currently running with cache turned off */ -+ DcacheFlushInvalidate(); -+#endif -+ -+ MCD_startDma(fp->fecpriv_fec_rx_channel, (char *) fp->fecpriv_rxdesc, 0, -+ (unsigned char *) &(FEC_FECRFDR(base_addr)), 0, -+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx, -+ FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT, -+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); -+ -+ netif_start_queue(dev); -+ return 0; -+ -+ERRORS: -+ -+ /* Remove the channels and return with the error code */ -+ if (fp->fecpriv_fec_rx_channel != -1) { -+ dma_disconnect(fp->fecpriv_fec_rx_channel); -+ dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel); -+ fp->fecpriv_fec_rx_channel = -1; -+ } -+ -+ if (fp->fecpriv_fec_tx_channel != -1) { -+ dma_disconnect(fp->fecpriv_fec_tx_channel); -+ dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel); -+ fp->fecpriv_fec_tx_channel = -1; -+ } -+ -+ return error_code; -+} -+ -+/************************************************************************ -+* NAME: fec_close -+* -+* DESCRIPTION: This function performs the graceful stop of the -+* transmission and disables FEC -+* -+* RETURNS: This function always returns zero. -+*************************************************************************/ -+int fec_close(struct net_device *dev) -+{ -+ struct fec_priv *fp = netdev_priv(dev); -+ unsigned long base_addr = (unsigned long) dev->base_addr; -+ unsigned long time; -+ int i; -+ -+ netif_stop_queue(dev); -+ -+ /* Perform the graceful stop */ -+ FEC_TCR(base_addr) |= FEC_TCR_GTS; -+ -+ time = jiffies; -+ -+ /* Wait for the graceful stop */ -+ while (!(FEC_EIR(base_addr) & FEC_EIR_GRA) && jiffies - time < FEC_GR_TIMEOUT * HZ) -+ schedule(); -+ -+ /* Disable FEC */ -+ FEC_ECR(base_addr) = FEC_ECR_DISABLE; -+ -+ /* Reset the DMA channels */ -+ spin_lock_irq(&fp->fecpriv_lock); -+ MCD_killDma(fp->fecpriv_fec_tx_channel); -+ spin_unlock_irq(&fp->fecpriv_lock); -+ dma_remove_channel_by_number(fp->fecpriv_fec_tx_channel); -+ dma_disconnect(fp->fecpriv_fec_tx_channel); -+ fp->fecpriv_fec_tx_channel = -1; -+ -+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) { -+ if (fp->fecpriv_txbuf[i]) { -+ kfree(fp->fecpriv_txbuf[i]); -+ fp->fecpriv_txbuf[i] = NULL; -+ } -+ } -+ -+ spin_lock_irq(&fp->fecpriv_lock); -+ MCD_killDma(fp->fecpriv_fec_rx_channel); -+ spin_unlock_irq(&fp->fecpriv_lock); -+ -+ dma_remove_channel_by_number(fp->fecpriv_fec_rx_channel); -+ dma_disconnect(fp->fecpriv_fec_rx_channel); -+ fp->fecpriv_fec_rx_channel = -1; -+ -+ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) { -+ if (fp->askb_rx[i]) { -+ kfree_skb(fp->askb_rx[i]); -+ fp->askb_rx[i] = NULL; -+ } -+ } -+ -+ return 0; -+} -+ -+/************************************************************************ -+* +NAME: fec_get_stat -+* -+* RETURNS: This function returns the statistical information. -+*************************************************************************/ -+struct net_device_stats * fec_get_stat(struct net_device *dev) -+{ -+ struct fec_priv *fp = netdev_priv(dev); -+ unsigned long base_addr = dev->base_addr; -+ -+ /* Receive the statistical information */ -+ fp->fecpriv_stat.rx_packets = FECSTAT_RMON_R_PACKETS(base_addr); -+ fp->fecpriv_stat.tx_packets = FECSTAT_RMON_T_PACKETS(base_addr); -+ fp->fecpriv_stat.rx_bytes = FECSTAT_RMON_R_OCTETS(base_addr); -+ fp->fecpriv_stat.tx_bytes = FECSTAT_RMON_T_OCTETS(base_addr); -+ -+ fp->fecpriv_stat.multicast = FECSTAT_RMON_R_MC_PKT(base_addr); -+ fp->fecpriv_stat.collisions = FECSTAT_RMON_T_COL(base_addr); -+ -+ fp->fecpriv_stat.rx_length_errors = FECSTAT_RMON_R_UNDERSIZE(base_addr) + -+ FECSTAT_RMON_R_OVERSIZE(base_addr) + -+ FECSTAT_RMON_R_FRAG(base_addr) + -+ FECSTAT_RMON_R_JAB(base_addr); -+ fp->fecpriv_stat.rx_crc_errors = FECSTAT_IEEE_R_CRC(base_addr); -+ fp->fecpriv_stat.rx_frame_errors = FECSTAT_IEEE_R_ALIGN(base_addr); -+ fp->fecpriv_stat.rx_over_errors = FECSTAT_IEEE_R_MACERR(base_addr); -+ -+ fp->fecpriv_stat.tx_carrier_errors = FECSTAT_IEEE_T_CSERR(base_addr); -+ fp->fecpriv_stat.tx_fifo_errors = FECSTAT_IEEE_T_MACERR(base_addr); -+ fp->fecpriv_stat.tx_window_errors = FECSTAT_IEEE_T_LCOL(base_addr); -+ -+ /* I hope that one frame doesn't have more than one error */ -+ fp->fecpriv_stat.rx_errors = fp->fecpriv_stat.rx_length_errors + -+ fp->fecpriv_stat.rx_crc_errors + -+ fp->fecpriv_stat.rx_frame_errors + -+ fp->fecpriv_stat.rx_over_errors + -+ fp->fecpriv_stat.rx_dropped; -+ fp->fecpriv_stat.tx_errors = fp->fecpriv_stat.tx_carrier_errors + -+ fp->fecpriv_stat.tx_fifo_errors + -+ fp->fecpriv_stat.tx_window_errors + -+ fp->fecpriv_stat.tx_aborted_errors + -+ fp->fecpriv_stat.tx_heartbeat_errors + -+ fp->fecpriv_stat.tx_dropped; -+ -+ return &fp->fecpriv_stat; -+} -+ -+/************************************************************************ -+* NAME: fec_set_multicast_list -+* -+* DESCRIPTION: This function sets the frame filtering parameters -+*************************************************************************/ -+void fec_set_multicast_list(struct net_device *dev) -+{ -+ struct dev_mc_list *dmi; -+ unsigned int crc, data; -+ int i, j, k; -+ unsigned long base_addr = (unsigned long) dev->base_addr; -+ -+ if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI) { -+ /* Allow all incoming frames */ -+ FEC_GALR(base_addr) = 0xFFFFFFFF; -+ FEC_GAUR(base_addr) = 0xFFFFFFFF; -+ return; -+ } -+ -+ /* Reset the group address register */ -+ FEC_GALR(base_addr) = 0x00000000; -+ FEC_GAUR(base_addr) = 0x00000000; -+ -+ /* Process all addresses */ -+ for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next) { -+ /* Processing must be only for the group addresses */ -+ if (!(dmi->dmi_addr[0] & 1)) -+ continue; -+ -+ /* Calculate crc value for the current address */ -+ crc = 0xFFFFFFFF; -+ for (j = 0; j < dmi->dmi_addrlen; j++) { -+ for (k = 0, data = dmi->dmi_addr[j]; k < 8; k++, data >>= 1) { -+ if ((crc ^ data) & 1) -+ crc = (crc >> 1) ^ FEC_CRCPOL; -+ else -+ crc >>= 1; -+ } -+ } -+ -+ /* Add this value */ -+ crc >>= 26; -+ crc &= 0x3F; -+ if (crc > 31) -+ FEC_GAUR(base_addr) |= 0x1 << (crc - 32); -+ else -+ FEC_GALR(base_addr) |= 0x1 << crc; -+ } -+} -+ -+/************************************************************************ -+* NAME: fec_set_mac_address -+* -+* DESCRIPTION: This function sets the MAC address -+*************************************************************************/ -+int fec_set_mac_address(struct net_device *dev, void *p) -+{ -+ struct fec_priv *fp = netdev_priv(dev); -+ unsigned long base_addr = (unsigned long) dev->base_addr; -+ struct sockaddr *addr = p; -+ -+ if (netif_running(dev)) -+ return -EBUSY; -+ -+ /* Copy a new address to the device structure */ -+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); -+ -+ /* Copy a new address to the private structure */ -+ memcpy(fp->fecpriv_mac_addr, addr->sa_data, 6); -+ -+ /* Set the address to the registers */ -+ FEC_PALR(base_addr) = (fp->fecpriv_mac_addr[0] << 24) | -+ (fp->fecpriv_mac_addr[1] << 16) | -+ (fp->fecpriv_mac_addr[2] << 8) | -+ fp->fecpriv_mac_addr[3]; -+ FEC_PAUR(base_addr) = (fp->fecpriv_mac_addr[4] << 24) | -+ (fp->fecpriv_mac_addr[5] << 16) | -+ 0x8808; -+ -+ return 0; -+} -+ -+/************************************************************************ -+* NAME: fec_tx -+* -+* DESCRIPTION: This function starts transmission of the frame using DMA -+* -+* RETURNS: This function always returns zero. -+*************************************************************************/ -+int fec_tx(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct fec_priv *fp = netdev_priv(dev); -+ void *data, *data_aligned; -+ int offset; -+ -+ data = kmalloc(skb->len + 15, GFP_DMA | GFP_ATOMIC); -+ -+ if (!data) { -+ fp->fecpriv_stat.tx_dropped++; -+ dev_kfree_skb(skb); -+ return 0; -+ } -+ -+ offset = (((unsigned long)virt_to_phys(data) + 15) & 0xFFFFFFF0) - -+ (unsigned long)virt_to_phys(data); -+ data_aligned = (void*)((unsigned long)data + offset); -+ memcpy(data_aligned, skb->data, skb->len); -+ -+ /* flush data cache before initializing the descriptor and starting DMA */ -+#if 0 -+/* JKM -- currently running with cache turned off */ -+ DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(data_aligned), skb->len); -+#endif -+ -+ spin_lock_irq(&fp->fecpriv_lock); -+ -+ /* Initialize the descriptor */ -+ fp->fecpriv_txbuf[fp->fecpriv_next_tx] = data; -+ fp->fecpriv_txdesc[fp->fecpriv_next_tx].dataPointer = (unsigned int) virt_to_phys(data_aligned); -+ fp->fecpriv_txdesc[fp->fecpriv_next_tx].length = skb->len; -+ fp->fecpriv_txdesc[fp->fecpriv_next_tx].statCtrl |= (MCD_FEC_END_FRAME | MCD_FEC_BUF_READY); -+ fp->fecpriv_next_tx = (fp->fecpriv_next_tx + 1) & FEC_TX_INDEX_MASK; -+ -+ if (fp->fecpriv_txbuf[fp->fecpriv_current_tx] && fp->fecpriv_current_tx == fp->fecpriv_next_tx) -+ netif_stop_queue(dev); -+ -+ spin_unlock_irq(&fp->fecpriv_lock); -+ -+ /* Tell the DMA to continue the transmission */ -+ MCD_continDma(fp->fecpriv_fec_tx_channel); -+ -+ dev_kfree_skb(skb); -+ -+ dev->trans_start = jiffies; -+ -+ return 0; -+} -+ -+/************************************************************************ -+* NAME: fec_tx_timeout -+* -+* DESCRIPTION: If the interrupt processing of received frames was lost -+* and DMA stopped the reception, this function clears -+* the transmission descriptors and starts DMA -+* -+*************************************************************************/ -+void fec_tx_timeout(struct net_device *dev) -+{ -+ int i; -+ struct fec_priv *fp = netdev_priv(dev); -+ unsigned long base_addr = (unsigned long) dev->base_addr; -+ -+ spin_lock_irq(&fp->fecpriv_lock); -+ MCD_killDma(fp->fecpriv_fec_tx_channel); -+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) { -+ if (fp->fecpriv_txbuf[i]) { -+ kfree(fp->fecpriv_txbuf[i]); -+ fp->fecpriv_txbuf[i] = NULL; -+ } -+ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT; -+ } -+ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP; -+ -+ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0; -+ -+ /* Reset FIFOs */ -+ FEC_FECFRST(base_addr) |= FEC_SW_RST; -+ FEC_FECFRST(base_addr) &= ~FEC_SW_RST; -+ -+ /* Reset and disable FEC */ -+// FEC_ECR(base_addr) = FEC_ECR_RESET; -+ -+ /* Enable FEC */ -+ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN; -+ -+ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0, -+ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0, -+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx, -+ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT, -+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); -+ -+ spin_unlock_irq(&fp->fecpriv_lock); -+ -+ netif_wake_queue(dev); -+ -+} -+ -+/************************************************************************ -+* NAME: fec_read_mii -+* -+* DESCRIPTION: This function reads the value from the MII register -+* -+* RETURNS: If no error occurs, this function returns zero. -+*************************************************************************/ -+int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int *data) -+{ -+ unsigned long time; -+ -+ /* Clear the MII interrupt bit */ -+ FEC_EIR(base_addr) = FEC_EIR_MII; -+ -+ /* Write to the MII management frame register */ -+ FEC_MMFR(base_addr) = FEC_MMFR_READ | (pa << 23) | (ra << 18); -+ -+ time = jiffies; -+ -+ /* Wait for the reading */ -+ while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) { -+ if (jiffies - time > FEC_MII_TIMEOUT * HZ) -+ return -ETIME; -+ schedule(); -+ } -+ -+ /* Clear the MII interrupt bit */ -+ FEC_EIR(base_addr) = FEC_EIR_MII; -+ -+ *data = FEC_MMFR(base_addr) & 0x0000FFFF; -+ -+ return 0; -+} -+ -+/************************************************************************ -+* NAME: fec_write_mii -+* -+* DESCRIPTION: This function writes the value to the MII register -+* -+* RETURNS: If no error occurs, this function returns zero. -+*************************************************************************/ -+int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, unsigned int data) -+{ -+ unsigned long time; -+ -+ /* Clear the MII interrupt bit */ -+ FEC_EIR(base_addr) = FEC_EIR_MII; -+ -+ /* Write to the MII management frame register */ -+ FEC_MMFR(base_addr) = FEC_MMFR_WRITE | (pa << 23) | (ra << 18) | data; -+ -+ time = jiffies; -+ -+ /* Wait for the writing */ -+ while (!(FEC_EIR(base_addr) & FEC_EIR_MII)) { -+ if (jiffies - time > FEC_MII_TIMEOUT * HZ) -+ return -ETIME; -+ schedule(); -+ } -+ -+ /* Clear the MII interrupt bit */ -+ FEC_EIR(base_addr) = FEC_EIR_MII; -+ -+ return 0; -+} -+ -+/************************************************************************ -+* NAME: fec_interrupt_tx_handler -+* -+* DESCRIPTION: This function is called when the data -+* transmission from the buffer to the FEC is completed. -+* -+*************************************************************************/ -+void fec_interrupt_fec_tx_handler(struct net_device *dev) -+{ -+ struct fec_priv *fp = netdev_priv(dev); -+ -+ /* Release the socket buffer */ -+ if(fp->fecpriv_txbuf[fp->fecpriv_current_tx]) { -+ kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]); -+ fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL; -+ } -+ fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK; -+ -+ if (MCD_dmaStatus(fp->fecpriv_fec_tx_channel) == MCD_DONE) { -+ for (; fp->fecpriv_current_tx != fp->fecpriv_next_tx; fp->fecpriv_current_tx = (fp->fecpriv_current_tx + 1) & FEC_TX_INDEX_MASK) { -+ if(fp->fecpriv_txbuf[fp->fecpriv_current_tx]) { -+ kfree(fp->fecpriv_txbuf[fp->fecpriv_current_tx]); -+ fp->fecpriv_txbuf[fp->fecpriv_current_tx] = NULL; -+ } -+ } -+ } -+ -+ if (netif_queue_stopped(dev)) -+ netif_wake_queue(dev); -+} -+ -+/************************************************************************ -+* NAME: fec_interrupt_rx_handler -+* -+* DESCRIPTION: This function is called when the data -+* reception from the FEC to the reception buffer is completed. -+* -+*************************************************************************/ -+void fec_interrupt_fec_rx_handler(struct net_device *dev) -+{ -+ struct fec_priv *fp = netdev_priv(dev); -+ struct sk_buff *skb; -+ int i; -+ -+ fp->fecpriv_rxflag = 1; -+ // Some buffers can be missed -+ if(!(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME)) -+ { -+ // Find a valid index -+ for(i = 0; i < FEC_RX_BUF_NUMBER && !(fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME); i++, fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK); -+ -+ if(i == FEC_RX_BUF_NUMBER) -+ { -+ // There are no data to process -+ // Tell the DMA to continue the reception -+ MCD_continDma(fp->fecpriv_fec_rx_channel); -+ -+ fp->fecpriv_rxflag = 0; -+ -+ return; -+ } -+ } -+ -+ for (; fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl & MCD_FEC_END_FRAME; fp->fecpriv_current_rx = (fp->fecpriv_current_rx + 1) & FEC_RX_INDEX_MASK) { -+ if( (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length <= FEC_MAXBUF_SIZE) && -+ (fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length > 4)) { /* --tym-- */ -+ skb = fp->askb_rx[fp->fecpriv_current_rx]; -+ if (!skb) -+ fp->fecpriv_stat.rx_dropped++; -+ else { -+ /* flush data cache before initializing the descriptor and starting DMA */ -+// DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), fp->askb_rx[fp->fecpriv_current_rx]->len); -+ -+ skb_put(skb, fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length - 4); -+ skb->protocol = eth_type_trans(skb, dev); -+ netif_rx(skb); -+ } -+ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl &= ~MCD_FEC_END_FRAME; -+ /* allocate new skbuff */ -+ fp->askb_rx[fp->fecpriv_current_rx] = alloc_skb(FEC_MAXBUF_SIZE + 16, /*GFP_ATOMIC |*/ GFP_DMA); -+ if (!fp->askb_rx[fp->fecpriv_current_rx]) { -+ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = 0; -+ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = 0; -+ fp->fecpriv_stat.rx_dropped++; -+ } -+ else { -+ skb_reserve(fp->askb_rx[fp->fecpriv_current_rx], 16); -+ fp->askb_rx[fp->fecpriv_current_rx]->dev = dev; -+ -+ /* flush data cache before initializing the descriptor and starting DMA */ -+#if 0 -+/* JKM -- currently running with cache turned off */ -+ DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE); -+#endif -+ -+ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail); -+ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].length = FEC_MAXBUF_SIZE; -+ fp->fecpriv_rxdesc[fp->fecpriv_current_rx].statCtrl |= MCD_FEC_BUF_READY; -+ -+ // flush data cache before initializing the descriptor and starting DMA -+// DcacheFlushInvalidateCacheBlock((void*)virt_to_phys(fp->askb_rx[fp->fecpriv_current_rx]->tail), FEC_MAXBUF_SIZE); -+ } -+ } -+ -+ } -+ -+ /* Tell the DMA to continue the reception */ -+ MCD_continDma(fp->fecpriv_fec_rx_channel); -+ -+ fp->fecpriv_rxflag = 0; -+} -+ -+/************************************************************************ -+* NAME: fec_interrupt_handler -+* -+* DESCRIPTION: This function is called when some special errors occur -+* -+*************************************************************************/ -+irqreturn_t fec_interrupt_handler(int irq, void *dev_id) -+{ -+ -+ struct net_device *dev = (struct net_device *)dev_id; -+ struct fec_priv *fp = netdev_priv(dev); -+ unsigned long base_addr = (unsigned long) dev->base_addr; -+ unsigned long events; -+ -+ /* Read and clear the events */ -+ events = FEC_EIR(base_addr) & FEC_EIMR(base_addr); -+ -+ if (events & FEC_EIR_HBERR) { -+ fp->fecpriv_stat.tx_heartbeat_errors++; -+ FEC_EIR(base_addr) = FEC_EIR_HBERR; -+ } -+ -+ /* receive/transmit FIFO error */ -+ if (((events & FEC_EIR_RFERR) != 0) || ((events & FEC_EIR_XFERR) != 0)) { -+ /* kill DMA receive channel */ -+ MCD_killDma (fp->fecpriv_fec_rx_channel); -+ -+ /* kill running transmission by DMA */ -+ MCD_killDma (fp->fecpriv_fec_tx_channel); -+ -+ /* Reset FIFOs */ -+ FEC_FECFRST(base_addr) |= FEC_SW_RST; -+ FEC_FECFRST(base_addr) &= ~FEC_SW_RST; -+ -+ /* reset receive FIFO status register */ -+ FEC_FECRFSR(base_addr) = FEC_FECRFSR_FAE | -+ FEC_FECRFSR_RXW | -+ FEC_FECRFSR_UF; -+ -+ /* reset transmit FIFO status register */ -+ FEC_FECTFSR(base_addr) = FEC_FECTFSR_FAE | -+ FEC_FECTFSR_TXW | -+ FEC_FECTFSR_UF | -+ FEC_FECTFSR_OF; -+ -+ /* reset RFERR and XFERR event */ -+ FEC_EIR(base_addr) = FEC_EIR_RFERR | FEC_EIR_XFERR; -+ -+ /* stop queue */ -+ netif_stop_queue(dev); -+ -+ /* execute reinitialization as tasklet */ -+ tasklet_schedule(&fp->fecpriv_tasklet_reinit); -+ -+ fp->fecpriv_stat.rx_dropped++; -+ } -+ -+ /* transmit FIFO underrun */ -+ if ((events & FEC_EIR_XFUN) != 0) { -+ /* reset XFUN event */ -+ FEC_EIR(base_addr) = FEC_EIR_XFUN; -+ fp->fecpriv_stat.tx_aborted_errors++; -+ } -+ -+ /* late collision */ -+ if ((events & FEC_EIR_LC) != 0) { -+ /* reset LC event */ -+ FEC_EIR(base_addr) = FEC_EIR_LC; -+ fp->fecpriv_stat.tx_aborted_errors++; -+ } -+ -+ /* collision retry limit */ -+ if ((events & FEC_EIR_RL) != 0) { -+ /* reset RL event */ -+ FEC_EIR(base_addr) = FEC_EIR_RL; -+ fp->fecpriv_stat.tx_aborted_errors++; -+ } -+ return 0; -+} -+ -+/************************************************************************ -+* NAME: fec_interrupt_reinit -+* -+* DESCRIPTION: This function is called from interrupt handler -+* when controller must be reinitialized. -+* -+*************************************************************************/ -+void fec_interrupt_fec_reinit(unsigned long data) -+{ -+ int i; -+ struct net_device *dev = (struct net_device*)data; -+ struct fec_priv *fp = netdev_priv(dev); -+ unsigned long base_addr = (unsigned long) dev->base_addr; -+ -+ /* Initialize reception descriptors and start DMA for the reception */ -+ for (i = 0; i < FEC_RX_BUF_NUMBER; i++) { -+ if (!fp->askb_rx[i]) { -+ fp->askb_rx[i] = alloc_skb(FEC_MAXBUF_SIZE + 16, GFP_ATOMIC | GFP_DMA); -+ if (!fp->askb_rx[i]) { -+ fp->fecpriv_rxdesc[i].dataPointer = 0; -+ fp->fecpriv_rxdesc[i].statCtrl = 0; -+ fp->fecpriv_rxdesc[i].length = 0; -+ continue; -+ } -+ fp->askb_rx[i]->dev = dev; -+ skb_reserve(fp->askb_rx[i], 16); -+ } -+ fp->fecpriv_rxdesc[i].dataPointer = (unsigned int) virt_to_phys(fp->askb_rx[i]->tail); -+ fp->fecpriv_rxdesc[i].statCtrl = MCD_FEC_BUF_READY | MCD_FEC_INTERRUPT; -+ fp->fecpriv_rxdesc[i].length = FEC_MAXBUF_SIZE; -+ } -+ -+ fp->fecpriv_rxdesc[i - 1].statCtrl |= MCD_FEC_WRAP; -+ fp->fecpriv_current_rx = 0; -+ -+ /* restart frame transmission */ -+ for (i = 0; i < FEC_TX_BUF_NUMBER; i++) { -+ if (fp->fecpriv_txbuf[i]) { -+ kfree(fp->fecpriv_txbuf[i]); -+ fp->fecpriv_txbuf[i] = NULL; -+ fp->fecpriv_stat.tx_dropped++; -+ } -+ fp->fecpriv_txdesc[i].statCtrl = MCD_FEC_INTERRUPT; -+ } -+ fp->fecpriv_txdesc[i - 1].statCtrl |= MCD_FEC_WRAP; -+ fp->fecpriv_current_tx = fp->fecpriv_next_tx = 0; -+ -+ /* flush entire data cache before restarting the DMA */ -+#if 0 -+/* JKM -- currently running with cache turned off */ -+ DcacheFlushInvalidate(); -+#endif -+ -+ /* restart DMA from beginning */ -+ MCD_startDma(fp->fecpriv_fec_rx_channel, -+ (char *) fp->fecpriv_rxdesc, 0, -+ (unsigned char *) &(FEC_FECRFDR(base_addr)), 0, -+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_rx, -+ FEC_RX_DMA_PRI, MCD_FECRX_DMA | MCD_INTERRUPT, -+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); -+ -+ MCD_startDma(fp->fecpriv_fec_tx_channel, (char *) fp->fecpriv_txdesc, 0, -+ (unsigned char *) &(FEC_FECTFDR(base_addr)), 0, -+ FEC_MAX_FRM_SIZE, 0, fp->fecpriv_initiator_tx, -+ FEC_TX_DMA_PRI, MCD_FECTX_DMA | MCD_INTERRUPT, -+ MCD_NO_CSUM | MCD_NO_BYTE_SWAP); -+ -+ /* Enable FEC */ -+ FEC_ECR(base_addr) |= FEC_ECR_ETHEREN; -+ -+ netif_wake_queue(dev); -+} -+ -+/************************************************************************ -+* NAME: fec_interrupt_tx_handler_fec0 -+* -+* DESCRIPTION: This is the DMA interrupt handler using for FEC0 -+* transmission. -+* -+*************************************************************************/ -+void fec_interrupt_fec_tx_handler_fec0(void) -+{ -+ fec_interrupt_fec_tx_handler(fec_dev[0]); -+} -+ -+#ifdef FEC_2 -+/************************************************************************ -+* NAME: fec_interrupt_tx_handler_fec1 -+* -+* DESCRIPTION: This is the DMA interrupt handler using for the FEC1 -+* transmission. -+* -+*************************************************************************/ -+void fec_interrupt_fec_tx_handler_fec1(void) -+{ -+ fec_interrupt_fec_tx_handler(fec_dev[1]); -+} -+#endif -+ -+/************************************************************************ -+* NAME: fec_interrupt_rx_handler_fec0 -+* -+* DESCRIPTION: This is the DMA interrupt handler using for the FEC0 -+* reception. -+* -+*************************************************************************/ -+void fec_interrupt_fec_rx_handler_fec0(void) -+{ -+ fec_interrupt_fec_rx_handler(fec_dev[0]); -+} -+ -+#ifdef FEC_2 -+/************************************************************************ -+* NAME: fec_interrupt_rx_handler_fec1 -+* -+* DESCRIPTION: This is the DMA interrupt handler using for the FEC1 -+* reception. -+* -+*************************************************************************/ -+void fec_interrupt_fec_rx_handler_fec1(void) -+{ -+ fec_interrupt_fec_rx_handler(fec_dev[1]); -+} -+ -+#endif -+ -+#ifndef MODULE -+/************************************************************************ -+* NAME: fec_mac_setup0 -+* -+* DESCRIPTION: This function sets the MAC address of FEC0 from command line -+* -+*************************************************************************/ -+int __init fec_mac_setup0(char *s) -+{ -+ if(!s || !*s) -+ return 1; -+ -+ if(fec_str_to_mac(s, fec_mac_addr_fec0)) -+ printk("The MAC address of FEC0 cannot be set from command line"); -+ return 1; -+} -+ -+#ifdef FEC_2 -+ -+/************************************************************************ -+* NAME: fec_mac_setup1 -+* -+* DESCRIPTION: This function sets the MAC address of FEC1 from command line -+* -+*************************************************************************/ -+int __init fec_mac_setup1(char *s) -+{ -+ if(!s || !*s) -+ return 1; -+ -+ if(fec_str_to_mac(s, fec_mac_addr_fec1)) -+ printk("The MAC address of FEC1 cannot be set from command line"); -+ return 1; -+} -+#endif -+ -+/************************************************************************ -+* NAME: fec_str_to_mac -+* -+* DESCRIPTION: This function interprets the character string into MAC addr -+* -+*************************************************************************/ -+int fec_str_to_mac( char *str_mac, unsigned char* addr) -+{ -+ unsigned long val; -+ char c; -+ unsigned long octet[6], *octetptr = octet; -+ int i; -+ -+again: -+ val = 0; -+ while ((c = *str_mac) != '\0') { -+ if ((c>='0')&&(c<='9')) { -+ val = (val * 16) + (c - '0'); -+ str_mac++; -+ continue; -+ } -+ else if (((c>='a')&&(c<='f'))||((c>='A')&&(c<='F'))) { -+ val = (val << 4) + (c + 10 - (((c>='a')&&(c<='f')) ? 'a' : 'A')); -+ str_mac++; -+ continue; -+ } -+ break; -+ } -+ if (*str_mac == ':') { -+ *octetptr++ = val, str_mac++; -+ if (octetptr >= octet + 6) -+ return 1; -+ goto again; -+ } -+ -+ /* Check for trailing characters */ -+ if (*str_mac && !(*str_mac==' ')) -+ return 1; -+ -+ *octetptr++ = val; -+ -+ if ((octetptr - octet)==6) { -+ for(i=0;i<=6;i++) -+ addr[i]=octet[i]; -+ } -+ else -+ return 1; -+ -+ return 0; -+} -+#endif ---- /dev/null -+++ b/drivers/net/fec/fec.h -@@ -0,0 +1,162 @@ -+ -+#define FEC_BASE_ADDR_FEC0 ((unsigned int)MCF_MBAR + 0x9000) -+#define FEC_BASE_ADDR_FEC1 ((unsigned int)MCF_MBAR + 0x9800) -+ -+//#define FEC_INTC_IMRH_INT_MASK38 (0x00000040) -+//#define FEC_INTC_IMRH_INT_MASK39 (0x00000080) -+//#define FEC_INTC_ICR_FEC0 (0x30) -+//#define FEC_INTC_ICR_FEC1 (0x31) -+#define FEC_FECI2CIRQ (0xFFC0) -+#define FEC_GPIO_PAR_FECI2CIRQ *(volatile unsigned short*)((unsigned int)MCF_MBAR + 0xA44) -+//#define FEC_INTC_ICRn(x) (*(volatile unsigned char *)(void*)((unsigned int) MCF_MBAR + 0x000740+((x)*0x001))) -+//#define FEC_INTC_IMRH *(volatile unsigned int*)((unsigned int)MCF_MBAR + 0x000708) -+ -+#define FEC_ECR_DISABLE (0x00000000) -+ -+#define FEC_ECR(x) *(volatile unsigned int *)(x + 0x024) -+#define FEC_EIR(x) *(volatile unsigned int*)(x + 0x004) -+#define FEC_PALR(x) *(volatile unsigned int*)(x + 0x0E4) -+#define FEC_PAUR(x) *(volatile unsigned int*)(x + 0x0E8) -+#define FEC_IALR(x) *(volatile unsigned int*)(x + 0x11C) -+#define FEC_IAUR(x) *(volatile unsigned int*)(x + 0x118) -+#define FEC_GALR(x) *(volatile unsigned int*)(x + 0x124) -+#define FEC_GAUR(x) *(volatile unsigned int*)(x + 0x120) -+#define FEC_RCR(x) *(volatile unsigned int*)(x + 0x084) -+#define FEC_FECRFCR(x) *(volatile unsigned int*)(x + 0x18C) -+#define FEC_FECRFAR(x) *(volatile unsigned int*)(x + 0x198) -+#define FEC_FECTFCR(x) *(volatile unsigned int*)(x + 0x1AC) -+#define FEC_FECTFAR(x) *(volatile unsigned int*)(x + 0x1B8) -+#define FEC_FECTFWR(x) *(volatile unsigned int*)(x + 0x144) -+#define FEC_CTCWR(x) *(volatile unsigned int*)(x + 0x1C8) -+#define FEC_EIMR(x) *(volatile unsigned int*)(x + 0x008) -+#define FEC_TCR(x) *(volatile unsigned int*)(x + 0x0C4) -+#define FEC_MIBC(x) *(volatile unsigned int*)(x + 0x064) -+#define FEC_MSCR(x) *(volatile unsigned int*)(x + 0x044) -+#define FEC_FECTFDR(x) *(volatile unsigned int*)(x + 0x1A4) -+#define FEC_FECRFDR(x) *(volatile unsigned int*)(x + 0x184) -+#define FEC_FECTFSR(x) *(volatile unsigned int*)(x + 0x1A8) -+#define FEC_FECRFSR(x) *(volatile unsigned int*)(x + 0x188) -+#define FECSTAT_RMON_R_PACKETS(x) *(volatile unsigned int*)(x + 0x284) -+#define FECSTAT_RMON_T_PACKETS(x) *(volatile unsigned int*)(x + 0x204) -+#define FECSTAT_RMON_R_OCTETS(x) *(volatile unsigned int*)(x + 0x2C4) -+#define FECSTAT_RMON_T_OCTETS(x) *(volatile unsigned int*)(x + 0x244) -+#define FECSTAT_RMON_R_UNDERSIZE(x) *(volatile unsigned int*)(x + 0x294) -+#define FECSTAT_RMON_R_OVERSIZE(x) *(volatile unsigned int*)(x + 0x298) -+#define FECSTAT_RMON_R_FRAG(x) *(volatile unsigned int*)(x + 0x29C) -+#define FECSTAT_RMON_R_JAB(x) *(volatile unsigned int*)(x + 0x2A0) -+#define FECSTAT_RMON_R_MC_PKT(x) *(volatile unsigned int*)(x + 0x28C) -+#define FECSTAT_RMON_T_COL(x) *(volatile unsigned int*)(x + 0x224) -+#define FECSTAT_IEEE_R_ALIGN(x) *(volatile unsigned int*)(x + 0x2D4) -+#define FECSTAT_IEEE_R_CRC(x) *(volatile unsigned int*)(x + 0x2D0) -+#define FECSTAT_IEEE_R_MACERR(x) *(volatile unsigned int*)(x + 0x2D8) -+#define FECSTAT_IEEE_T_CSERR(x) *(volatile unsigned int*)(x + 0x268) -+#define FECSTAT_IEEE_T_MACERR(x) *(volatile unsigned int*)(x + 0x264) -+#define FECSTAT_IEEE_T_LCOL(x) *(volatile unsigned int*)(x + 0x25C) -+#define FECSTAT_IEEE_R_OCTETS_OK(x) *(volatile unsigned int*)(x + 0x2E0) -+#define FECSTAT_IEEE_T_OCTETS_OK(x) *(volatile unsigned int*)(x + 0x274) -+#define FECSTAT_IEEE_R_DROP(x) *(volatile unsigned int*)(x + 0x2C8) -+#define FECSTAT_IEEE_T_DROP(x) *(volatile unsigned int*)(x + 0x248) -+#define FECSTAT_IEEE_R_FRAME_OK(x) *(volatile unsigned int*)(x + 0x2CC) -+#define FECSTAT_IEEE_T_FRAME_OK(x) *(volatile unsigned int*)(x + 0x24C) -+#define FEC_MMFR(x) *(volatile unsigned int*)(x + 0x040) -+#define FEC_FECFRST(x) *(volatile unsigned int*)(x + 0x1C4) -+ -+#define FEC_MAX_FRM_SIZE (1518) -+#define FEC_MAXBUF_SIZE (1520) -+ -+// Register values -+#define FEC_ECR_RESET (0x00000001) -+#define FEC_EIR_CLEAR (0xFFFFFFFF) -+#define FEC_EIR_RL (0x00100000) -+#define FEC_EIR_HBERR (0x80000000) -+#define FEC_EIR_BABR (0x40000000) // babbling receive error -+#define FEC_EIR_BABT (0x20000000) // babbling transmit error -+#define FEC_EIR_TXF (0x08000000) // transmit frame interrupt -+#define FEC_EIR_MII (0x00800000) // MII interrupt -+#define FEC_EIR_LC (0x00200000) // late collision -+#define FEC_EIR_XFUN (0x00080000) // transmit FIFO underrun -+#define FEC_EIR_XFERR (0x00040000) // transmit FIFO error -+#define FEC_EIR_RFERR (0x00020000) // receive FIFO error -+#define FEC_RCR_MAX_FRM_SIZE (FEC_MAX_FRM_SIZE << 16) -+#define FEC_RCR_MII (0x00000004) -+#define FEC_FECRFCR_FAE (0x00400000) // frame accept error -+#define FEC_FECRFCR_RXW (0x00200000) // receive wait condition -+#define FEC_FECRFCR_UF (0x00100000) // receive FIFO underflow -+#define FEC_FECRFCR_FRM (0x08000000) -+#define FEC_FECRFCR_GR (0x7 << 24) -+ -+#define FEC_EIMR_DISABLE (0x00000000) -+ -+#define FEC_FECRFAR_ALARM (0x300) -+#define FEC_FECTFCR_FRM (0x08000000) -+#define FEC_FECTFCR_GR (0x7 << 24) -+#define FEC_FECTFCR_FAE (0x00400000) // frame accept error -+#define FEC_FECTFCR_TXW (0x00040000) // transmit wait condition -+#define FEC_FECTFCR_UF (0x00100000) // transmit FIFO underflow -+#define FEC_FECTFCR_OF (0x00080000) // transmit FIFO overflow -+ -+#define FEC_FECTFAR_ALARM (0x100) -+#define FEC_FECTFWR_XWMRK (0x00000000) -+ -+#define FEC_FECTFSR_MSK (0xC0B00000) -+#define FEC_FECTFSR_TXW (0x40000000) // transmit wait condition -+#define FEC_FECTFSR_FAE (0x00800000) // frame accept error -+#define FEC_FECTFSR_UF (0x00200000) // transmit FIFO underflow -+#define FEC_FECTFSR_OF (0x00100000) // transmit FIFO overflow -+ -+#define FEC_FECRFSR_MSK (0x80F00000) -+#define FEC_FECRFSR_FAE (0x00800000) // frame accept error -+#define FEC_FECRFSR_RXW (0x00400000) // receive wait condition -+#define FEC_FECRFSR_UF (0x00200000) // receive FIFO underflow -+ -+#define FEC_CTCWR_TFCW_CRC (0x03000000) -+#define FEC_TCR_FDEN (0x00000004) -+#define FEC_TCR_HBC (0x00000002) -+#define FEC_RCR_DRT (0x00000002) -+#define FEC_EIMR_MASK (FEC_EIR_RL | FEC_EIR_HBERR) -+#define FEC_ECR_ETHEREN (0x00000002) -+#define FEC_FECTFCR_MSK (0x00FC0000) -+#define FEC_FECRFCR_MSK (0x00F80000) -+#define FEC_EIR_GRA (0x10000000) -+#define FEC_TCR_GTS (0x00000001) -+#define FEC_MIBC_ENABLE (0x00000000) -+#define FEC_MIB_LEN (228) -+#define FEC_PHY_ADDR (0x01) -+ -+#define FEC_RX_DMA_PRI (6) -+#define FEC_TX_DMA_PRI (6) -+ -+#define FEC_TX_BUF_NUMBER (8) -+#define FEC_RX_BUF_NUMBER (64) -+ -+#define FEC_TX_INDEX_MASK (0x7) -+#define FEC_RX_INDEX_MASK (0x3f) -+ -+#define FEC_RX_DESC_FEC0 SYS_SRAM_FEC_START -+#define FEC_TX_DESC_FEC0 FEC_RX_DESC_FEC0 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec) -+ -+#define FEC_RX_DESC_FEC1 SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE/2 -+#define FEC_TX_DESC_FEC1 FEC_RX_DESC_FEC1 + FEC_RX_BUF_NUMBER * sizeof(MCD_bufDescFec) -+ -+#define FEC_EIR_MII (0x00800000) -+#define FEC_MMFR_READ (0x60020000) -+#define FEC_MMFR_WRITE (0x50020000) -+ -+#define FEC_FLAGS_RX (0x00000001) -+ -+#define FEC_CRCPOL (0xEDB88320) -+ -+#define FEC_MII_TIMEOUT (2) -+#define FEC_GR_TIMEOUT (1) -+#define FEC_TX_TIMEOUT (1) -+#define FEC_RX_TIMEOUT (1) -+ -+#define FEC_SW_RST 0x2000000 -+#define FEC_RST_CTL 0x1000000 -+ -+int fec_read_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, -+ unsigned int *data); -+int fec_write_mii(unsigned int base_addr, unsigned int pa, unsigned int ra, -+ unsigned int data); -+ -+#define init_transceiver ks8721_init_transceiver ---- /dev/null -+++ b/drivers/net/fec/Kconfig -@@ -0,0 +1,25 @@ -+config FEC_548x -+ tristate "MCF547x/MCF548x Fast Ethernet Controller support" -+ depends on M547X_8X -+ help -+ The MCF547x and MCF548x have a built-in Fast Ethernet Controller. -+ Saying Y here will include support for this device in the kernel. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called fecm. -+ -+config FEC_548x_AUTO_NEGOTIATION -+ bool "Enable Auto-Negotiation" -+ depends on FEC_548x -+ help -+ This option enables the FEC to automatically detect the -+ half/full duplex mode and the network speed at initialization -+ If you want this, say Y. -+ -+config FEC_548x_ENABLE_FEC2 -+ bool "Enable the second FEC" -+ depends on FEC_548x -+ help -+ This enables the second FEC on the 547x/548x. If you want to use -+ it, say Y. -+ ---- /dev/null -+++ b/drivers/net/fec/ks8721.c -@@ -0,0 +1,125 @@ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/ptrace.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/slab.h> -+#include <linux/interrupt.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/skbuff.h> -+#include <linux/spinlock.h> -+#include <linux/workqueue.h> -+#include <linux/bitops.h> -+ -+#if 0 -+#include <linux/config.h> -+#include <linux/sched.h> -+#include <linux/errno.h> -+#include <asm/coldfire.h> -+#endif -+#include <asm/coldfire.h> -+#include <asm/mcfsim.h> -+ -+#include "fec.h" -+#include "ks8721.h" -+ -+#ifdef CONFIG_FEC_548x_AUTO_NEGOTIATION -+#define KS8721_AUTO_NEGOTIATION_ENABLE -+#endif -+ -+/************************************************************************ -+* +NAME: ks8721_init_transceiver -+* -+* DESCRIPTION: This function initializes the transceiver -+* -+* RETURNS: If no error occurs, this function returns zero. -+* Otherwise, it returns 1 -+*************************************************************************/ -+ -+int ks8721_init_transceiver(unsigned long base_addr, int *fduplex) -+{ -+ -+ int data; -+ unsigned long time; -+ int flag = 1; -+ -+ int result; -+ -+ // Set the frequency of MII -+ FEC_MSCR(base_addr) = FEC_MII_SPEED; -+ -+ // Reset -+ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_RESET))) -+ return result; -+ -+ // Read back -+ if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, &data)) != 0) -+ return result; -+ -+ // If reset bit is set, return -+ if (data & KS8721_CTRL_RESET) -+ return -ETIME; -+ -+#ifdef KS8721_AUTO_NEGOTIATION_ENABLE -+ -+ // Disable the auto-negotiation -+ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, 0)) != 0) -+ return result; -+ -+ // Set the auto-negotiation advertisement register -+ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_ANADV, KS8721_ANADV_ADV_ALL)) != 0) -+ return result; -+ -+ // Enable the auto-negotiation -+ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_AN_ENABLE)) != 0) -+ return result; -+ -+ // Read PHY status register -+ if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_STAT, &data)) != 0) -+ return result; -+ // Set the current time -+ time = jiffies; -+ -+ // Wait for the auto-negotiation completion -+ while (!(data & KS8721_STAT_ANCOMPLETE)) -+ { -+ -+ if (jiffies - time > KS8721_TIMEOUT * HZ) -+ { -+ flag = 0; -+ break; -+ } -+ -+ schedule(); -+ -+ // Read PHY status register -+ if ((result = fec_read_mii(base_addr, FEC_PHY_ADDR, KS8721_STAT, &data)) != 0) -+ return result; -+ } -+ -+ if (flag) -+ { -+ // Set the duplex flag -+ if (data & KS8721_STAT_FDUPLEX) -+ *fduplex = 1; -+ else -+ *fduplex = 0; -+ -+ return 0; -+ } -+ -+#endif -+ -+ // Set the default mode (Full duplex, 100 Mbps) -+ if ((result = fec_write_mii(base_addr, FEC_PHY_ADDR, KS8721_CTRL, KS8721_CTRL_DEFAULT_MODE)) != 0) -+ return result; -+ *fduplex = KS8721_CTRL_DEFAULT_MODE & 0x100; -+ -+ return 0; -+ -+} ---- /dev/null -+++ b/drivers/net/fec/ks8721.h -@@ -0,0 +1,21 @@ -+ -+#define FEC_MII_SPEED (((unsigned int)(MCF_BUSCLK / 5000000)) << 1) -+ -+// Numbers of the transceiver registers -+#define KS8721_CTRL 0x00 -+#define KS8721_ANADV 0x04 -+#define KS8721_STAT 0x01 -+ -+// Register values -+#define KS8721_CTRL_RESET 0x8000 -+#define KS8721_ANADV_ADV_ALL 0x01E1 -+#define KS8721_CTRL_AN_ENABLE 0x1280 -+#define KS8721_CTRL_DEFAULT_MODE 0x2100 -+#define KS8721_STAT_ANCOMPLETE 0x0020 -+#define KS8721_STAT_LINK 0x0004 -+#define KS8721_STAT_FDUPLEX 0x5000 -+ -+// Timeout for the auto-negotiation mode -+#define KS8721_TIMEOUT 5 -+ -+int ks8721_init_transceiver(unsigned long base_addr, int *fduplex); ---- /dev/null -+++ b/drivers/net/fec/Makefile -@@ -0,0 +1,7 @@ -+# -+# Makefile for the FEC ethernet driver -+# -+ -+obj-$(CONFIG_FEC_548x) += fecm.o -+ -+fecm-objs := fec.o ks8721.o ---- a/drivers/net/fec.c -+++ b/drivers/net/fec.c -@@ -23,6 +23,9 @@ - * - * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) - * Copyright (c) 2004-2006 Macq Electronique SA. -+ * -+ * Coldfire bug fixes and cleanup by Kurt Mahan (kmahan@freescale.com) -+ * Copyright 2007-2008 Freescale Semiconductor, Inc. All Rights Reserved. - */ - - #include <linux/module.h> -@@ -51,7 +54,9 @@ - - #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \ - defined(CONFIG_M5272) || defined(CONFIG_M528x) || \ -- defined(CONFIG_M520x) || defined(CONFIG_M532x) -+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || \ -+ defined(CONFIG_M5445X) -+ - #include <asm/coldfire.h> - #include <asm/mcfsim.h> - #include "fec.h" -@@ -82,6 +87,11 @@ static unsigned int fec_hw[] = { - (MCF_MBAR+0x30000), - #elif defined(CONFIG_M532x) - (MCF_MBAR+0xfc030000), -+#elif defined(CONFIG_M5445X) -+ (MCF_MBAR+0xfc030000), -+#if defined(CONFIG_FEC2) -+ (MCF_MBAR+0xfc034000), -+#endif - #else - &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec), - #endif -@@ -172,7 +182,7 @@ typedef struct { - * account when setting it. - */ - #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ -- defined(CONFIG_M520x) || defined(CONFIG_M532x) -+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) - #define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16) - #else - #define OPT_FRAME_SIZE 0 -@@ -213,6 +223,7 @@ struct fec_enet_private { - uint phy_speed; - phy_info_t const *phy; - struct work_struct phy_task; -+ volatile fec_t *phy_hwp; - - uint sequence_done; - uint mii_phy_task_queued; -@@ -349,7 +360,8 @@ fec_enet_start_xmit(struct sk_buff *skb, - if (bdp->cbd_bufaddr & 0x3) { - unsigned int index; - index = bdp - fep->tx_bd_base; -- memcpy(fep->tx_bounce[index], (void *) bdp->cbd_bufaddr, bdp->cbd_datlen); -+ memcpy(fep->tx_bounce[index], -+ (void *)skb->data, bdp->cbd_datlen); - bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]); - } - -@@ -702,7 +714,7 @@ fec_enet_mii(struct net_device *dev) - uint mii_reg; - - fep = netdev_priv(dev); -- ep = fep->hwp; -+ ep = fep->phy_hwp; - mii_reg = ep->fec_mii_data; - - spin_lock(&fep->lock); -@@ -753,7 +765,7 @@ mii_queue(struct net_device *dev, int re - mii_tail = mip; - } else { - mii_head = mii_tail = mip; -- fep->hwp->fec_mii_data = regval; -+ fep->phy_hwp->fec_mii_data = regval; - } - } else { - retval = 1; -@@ -1151,8 +1163,7 @@ static phy_info_t const phy_info_ks8721b - }; - - /* ------------------------------------------------------------------------- */ --/* register definitions for the DP83848 */ -- -+/* register definitions for the DP83848 and DP83849 */ - #define MII_DP8384X_PHYSTST 16 /* PHY Status Register */ - - static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev) -@@ -1186,27 +1197,50 @@ static void mii_parse_dp8384x_sr2(uint m - *s |= PHY_STAT_FAULT; - } - -+static phy_cmd_t const phy_cmd_dp8384x_ack_int[] = { -+ { mk_mii_end, } -+ }; -+ -+static phy_cmd_t const phy_cmd_dp8384x_shutdown[] = { -+ { mk_mii_end, } -+ }; -+ - static phy_info_t phy_info_dp83848= { -- 0x020005c9, -- "DP83848", -+ .id = 0x020005c9, -+ .name = "DP83848", - -- (const phy_cmd_t []) { /* config */ -+ .config = (const phy_cmd_t []) { /* config */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 }, - { mk_mii_end, } - }, -- (const phy_cmd_t []) { /* startup - enable interrupts */ -+ .startup = (const phy_cmd_t []) { /* startup - enable interrupts */ - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }, -- (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */ -+ .ack_int = phy_cmd_dp8384x_ack_int, -+ .shutdown = phy_cmd_dp8384x_shutdown, -+}; -+ -+static phy_info_t phy_info_dp83849 = { -+ .id = 0x020005ca, -+ .name = "DP83849", -+ -+ .config = (const phy_cmd_t []) { /* config */ -+ { mk_mii_read(MII_REG_CR), mii_parse_cr }, -+ { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, -+ { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 }, - { mk_mii_end, } - }, -- (const phy_cmd_t []) { /* shutdown */ -+ .startup = (const phy_cmd_t []) { /* startup - enable interrupts */ -+ { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ -+ { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }, -+ .ack_int = phy_cmd_dp8384x_ack_int, -+ .shutdown = phy_cmd_dp8384x_shutdown, - }; - - /* ------------------------------------------------------------------------- */ -@@ -1218,6 +1252,7 @@ static phy_info_t const * const phy_info - &phy_info_am79c874, - &phy_info_ks8721bl, - &phy_info_dp83848, -+ &phy_info_dp83849, - NULL - }; - -@@ -1799,6 +1834,138 @@ static void __inline__ fec_uncache(unsig - - /* ------------------------------------------------------------------------- */ - -+#elif defined(CONFIG_M5445X) -+/* -+ * Code specific for M5445X -+ */ -+ -+static void __inline__ fec_request_intrs(struct net_device *dev) -+{ -+ struct fec_enet_private *fep; -+ int b; -+ static const struct idesc { -+ char *name; -+ unsigned short irq; -+ } *idp, id[] = { -+ { "fec(TXF)", 36 }, -+ { "fec(TXB)", 37 }, -+ { "fec(TXFIFO)", 38 }, -+ { "fec(TXCR)", 39 }, -+ { "fec(RXF)", 40 }, -+ { "fec(RXB)", 41 }, -+ { "fec(MII)", 42 }, -+ { "fec(LC)", 43 }, -+ { "fec(HBERR)", 44 }, -+ { "fec(GRA)", 45 }, -+ { "fec(EBERR)", 46 }, -+ { "fec(BABT)", 47 }, -+ { "fec(BABR)", 48 }, -+ { NULL }, -+ }; -+ -+ fep = netdev_priv(dev); -+ b = (fep->index) ? 77 : 64; -+ -+ /* Setup interrupt handlers. */ -+ for (idp = id; idp->name; idp++) { -+ if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, -+ idp->name, dev) != 0) -+ printk(KERN_ERR "FEC: Could not alloc %s IRQ(%d)!\n", -+ idp->name, b+idp->irq); -+ } -+ -+ if (fep->index) { -+ /* Configure RMII */ -+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & -+ MCF_GPIO_PAR_FEC_FEC1_MASK) | -+ MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO; -+ } else { -+ /* Configure RMII */ -+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & -+ MCF_GPIO_PAR_FEC_FEC0_MASK) | -+ MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO; -+ } -+ -+ /* Set up gpio outputs for MII lines on FEC0 */ -+ MCF_GPIO_PAR_FECI2C |= (0 | -+ MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 | -+ MCF_GPIO_PAR_FECI2C_MDC0_MDC0); -+} -+ -+static void __inline__ fec_set_mii(struct net_device *dev, -+ struct fec_enet_private *fep) -+{ -+ volatile fec_t *fecp; -+ -+ fecp = fep->hwp; -+ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04; -+ fecp->fec_x_cntrl = 0x00; -+ -+ /* -+ * Set MII speed to 2.5 MHz -+ */ -+ fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; -+ fecp->fec_mii_speed = fep->phy_speed; -+ -+ fec_restart(dev, 0); -+} -+ -+static void __inline__ fec_get_mac(struct net_device *dev) -+{ -+ struct fec_enet_private *fep = netdev_priv(dev); -+ volatile fec_t *fecp; -+ unsigned char *iap, tmpaddr[ETH_ALEN]; -+ -+ fecp = fep->hwp; -+ -+ if (FEC_FLASHMAC) { -+ /* -+ * Get MAC address from FLASH. -+ * If it is all 1's or 0's, use the default. -+ */ -+ iap = FEC_FLASHMAC; -+ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && -+ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) -+ iap = fec_mac_default; -+ if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && -+ (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) -+ iap = fec_mac_default; -+ } else { -+ *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low; -+ *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16); -+ iap = &tmpaddr[0]; -+ } -+ -+ memcpy(dev->dev_addr, iap, ETH_ALEN); -+ -+ /* Adjust MAC if using default MAC address */ -+ if (iap == fec_mac_default) -+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + -+ fep->index; -+} -+ -+static void __inline__ fec_enable_phy_intr(void) -+{ -+} -+ -+static void __inline__ fec_disable_phy_intr(void) -+{ -+} -+ -+static void __inline__ fec_phy_ack_intr(void) -+{ -+} -+ -+static void __inline__ fec_localhw_setup(void) -+{ -+} -+ -+static void __inline__ fec_uncache(unsigned long addr) -+{ -+} -+ -+/* ------------------------------------------------------------------------- */ -+ - - #else - -@@ -2305,7 +2472,7 @@ fec_set_mac_address(struct net_device *d - - } - --/* Initialize the FEC Ethernet on 860T (or ColdFire 5272). -+/* Initialize the FEC Ethernet. - */ - /* - * XXX: We need to clean up on failure exits here. -@@ -2326,7 +2493,7 @@ int __init fec_enet_init(struct net_devi - - /* Allocate memory for buffer descriptors. - */ -- mem_addr = __get_free_page(GFP_KERNEL); -+ mem_addr = __get_free_page(GFP_DMA); - if (mem_addr == 0) { - printk("FEC: allocate descriptor memory failed?\n"); - return -ENOMEM; -@@ -2339,6 +2506,11 @@ int __init fec_enet_init(struct net_devi - fep->index = index; - fep->hwp = fecp; - fep->netdev = dev; -+#ifdef CONFIG_FEC_SHARED_PHY -+ fep->phy_hwp = (volatile fec_t *) fec_hw[index & ~1]; -+#else -+ fep->phy_hwp = fecp; -+#endif - - /* Whack a reset. We should wait for this. - */ -@@ -2375,7 +2547,7 @@ int __init fec_enet_init(struct net_devi - - /* Allocate a page. - */ -- mem_addr = __get_free_page(GFP_KERNEL); -+ mem_addr = __get_free_page(GFP_DMA); - /* XXX: missing check for allocation failure */ - - fec_uncache(mem_addr); -@@ -2400,7 +2572,7 @@ int __init fec_enet_init(struct net_devi - bdp = fep->tx_bd_base; - for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) { - if (j >= FEC_ENET_TX_FRPPG) { -- mem_addr = __get_free_page(GFP_KERNEL); -+ mem_addr = __get_free_page(GFP_DMA); - j = 1; - } else { - mem_addr += FEC_ENET_TX_FRSIZE; -@@ -2462,7 +2634,11 @@ int __init fec_enet_init(struct net_devi - * remainder of the interface. - */ - fep->phy_id_done = 0; -+#ifndef CONFIG_FEC_SHARED_PHY - fep->phy_addr = 0; -+#else -+ fep->phy_addr = fep->index; -+#endif - mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); - - index++; ---- a/drivers/net/fec.h -+++ b/drivers/net/fec.h -@@ -14,7 +14,7 @@ - /****************************************************************************/ - - #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ -- defined(CONFIG_M520x) || defined(CONFIG_M532x) -+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) - /* - * Just figures, Motorola would have to change the offsets for - * registers in the same peripheral device on different models ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -351,6 +351,8 @@ config MACB - - source "drivers/net/arm/Kconfig" - -+source "drivers/net/fec/Kconfig" -+ - config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS || SUPERH -@@ -1973,7 +1975,7 @@ config 68360_ENET - - config FEC - bool "FEC ethernet controller (of ColdFire CPUs)" -- depends on M523x || M527x || M5272 || M528x || M520x -+ depends on M523x || M527x || M5272 || M528x || M520x || M5445X - help - Say Y here if you want to use the built-in 10/100 Fast ethernet - controller on some Motorola ColdFire processors. -@@ -1985,6 +1987,12 @@ config FEC2 - Say Y here if you want to use the second built-in 10/100 Fast - ethernet controller on some Motorola ColdFire processors. - -+config FEC_SHARED_PHY -+ bool "Shared PHY interface(on some ColdFire designs)" -+ depends on FEC2 -+ help -+ Say Y here if both PHYs are controlled via a single channel. -+ - config FEC_MPC52xx - tristate "MPC52xx FEC driver" - depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -226,6 +226,8 @@ obj-$(CONFIG_ENC28J60) += enc28j60.o - - obj-$(CONFIG_MACB) += macb.o - -+obj-$(CONFIG_FEC_548x) += fec/ -+ - obj-$(CONFIG_ARM) += arm/ - obj-$(CONFIG_DEV_APPLETALK) += appletalk/ - obj-$(CONFIG_TR) += tokenring/ ---- a/drivers/pci/access.c -+++ b/drivers/pci/access.c -@@ -23,6 +23,7 @@ static DEFINE_SPINLOCK(pci_lock); - #define PCI_word_BAD (pos & 1) - #define PCI_dword_BAD (pos & 3) - -+#ifdef NL_ORIGINAL - #define PCI_OP_READ(size,type,len) \ - int pci_bus_read_config_##size \ - (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ -@@ -37,7 +38,20 @@ int pci_bus_read_config_##size \ - spin_unlock_irqrestore(&pci_lock, flags); \ - return res; \ - } -- -+#else /* NL_ORIGINAL */ -+#define PCI_OP_READ(size,type,len) \ -+int pci_bus_read_config_##size \ -+ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ -+{ \ -+ int res; \ -+ unsigned long flags; \ -+ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ -+ spin_lock_irqsave(&pci_lock, flags); \ -+ res = bus->ops->read(bus, devfn, pos, len, (u32 *)value); \ -+ spin_unlock_irqrestore(&pci_lock, flags); \ -+ return res; \ -+} -+#endif /* NL_ORIGINAL */ - #define PCI_OP_WRITE(size,type,len) \ - int pci_bus_write_config_##size \ - (struct pci_bus *bus, unsigned int devfn, int pos, type value) \ ---- a/drivers/pci/Makefile -+++ b/drivers/pci/Makefile -@@ -39,6 +39,7 @@ obj-$(CONFIG_PPC) += setup-bus.o - obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o - obj-$(CONFIG_X86_VISWS) += setup-irq.o - obj-$(CONFIG_MN10300) += setup-bus.o -+obj-$(CONFIG_M54455) += setup-bus.o setup-irq.o - - # - # ACPI Related PCI FW Functions ---- a/drivers/rtc/rtc-rs5c372.c -+++ b/drivers/rtc/rtc-rs5c372.c -@@ -15,7 +15,6 @@ - - #define DRV_VERSION "0.5" - -- - /* - * Ricoh has a family of I2C based RTCs, which differ only slightly from - * each other. Differences center on pinout (e.g. how many interrupts, -@@ -60,6 +59,15 @@ - /* to read (style 1) or write registers starting at R */ - #define RS5C_ADDR(R) (((R) << 4) | 0) - -+#ifdef CONFIG_M547X_8X -+#define DRV_NAME "rv5c387a" -+/* i2c configuration */ -+#define RV5C387_I2C_ADDR 0x32 -+static unsigned short normal_i2c[] = { -+ RV5C387_I2C_ADDR, I2C_CLIENT_END -+}; -+I2C_CLIENT_INSMOD; /* defines addr_data */ -+#endif - - enum rtc_type { - rtc_undef = 0, -@@ -506,14 +514,14 @@ static int rs5c372_probe(struct i2c_clie - err = -ENODEV; - goto exit; - } -- -- if (!(rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL))) { -+ rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL); -+ if (!rs5c372) { - err = -ENOMEM; - goto exit; - } - - /* we read registers 0x0f then 0x00-0x0f; skip the first one */ -- rs5c372->regs=&rs5c372->buf[1]; -+ rs5c372->regs = &rs5c372->buf[1]; - - rs5c372->client = client; - i2c_set_clientdata(client, rs5c372); -@@ -605,7 +613,7 @@ static int rs5c372_probe(struct i2c_clie - case rtc_rv5c386: s = "rv5c386"; break; - case rtc_rv5c387a: s = "rv5c387a"; break; - default: s = "chip"; break; -- }; s;}), -+ }; s; }), - rs5c372->time24 ? "24hr" : "am/pm" - ); - -@@ -645,12 +653,61 @@ static int rs5c372_remove(struct i2c_cli - return 0; - } - -+#ifdef CONFIG_M547X_8X -+static int rv5c387_probe(struct i2c_adapter *adapter, int addr, int kind) -+{ -+ int rc = 0; -+ struct i2c_client *new_client = NULL; -+ -+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { -+ rc = -ENODEV; -+ printk(KERN_DEBUG "%s i2c_check_functionality\n", __FUNCTION__); -+ goto failout; -+ } -+ -+ new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); -+ if (new_client == NULL) { -+ rc = -ENOMEM; -+ printk(KERN_DEBUG "%s kzalloc new_client\n", __FUNCTION__); -+ goto failout; -+ } -+ -+ new_client->addr = addr; -+ new_client->adapter = adapter; -+ new_client->driver = &rs5c372_driver; -+ new_client->flags = 0; -+ strcpy(new_client->name, DRV_NAME); -+ -+ rc = i2c_attach_client(new_client); -+ if (rc < 0) { -+ printk(KERN_DEBUG "%s i2c_attach_client\n", __FUNCTION__); -+ goto failout; -+ } -+ -+ rs5c372_probe(new_client); -+ return 0; -+failout: -+ kfree(new_client); -+ return rc; -+} -+ -+static int -+rv5c387_attach_adapter(struct i2c_adapter *adapter) -+{ -+ return i2c_probe(adapter, &addr_data, rv5c387_probe); -+} -+#endif -+ - static struct i2c_driver rs5c372_driver = { - .driver = { - .name = "rtc-rs5c372", - }, -+#ifdef CONFIG_M547X_8X -+ .attach_adapter = &rv5c387_attach_adapter, -+#else - .probe = rs5c372_probe, - .remove = rs5c372_remove, -+#endif - }; - - static __init int rs5c372_init(void) ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -979,6 +979,12 @@ config SERIAL_COLDFIRE - This driver supports the built-in serial ports of the Motorola ColdFire - family of CPUs. - -+config SERIAL_COLDFIRE_IRDA -+ bool "ColdFire IRDA support" -+ depends on SERIAL_COLDFIRE -+ help -+ This driver supports IRDA on the Motorola ColdFire. -+ - config SERIAL_MCF - bool "Coldfire serial support (new style driver)" - depends on COLDFIRE ---- a/drivers/serial/mcfserial.c -+++ b/drivers/serial/mcfserial.c -@@ -45,7 +45,14 @@ - #include <asm/coldfire.h> - #include <asm/mcfsim.h> - #include <asm/mcfuart.h> -+#if defined(CONFIG_M547X_8X) -+#include <asm/m5485sim.h> -+#include <asm/m5485psc.h> -+#include <asm/m5485gpio.h> -+#endif -+#ifdef CONFIG_NETtel - #include <asm/nettel.h> -+#endif - #include <asm/uaccess.h> - #include "mcfserial.h" - -@@ -61,7 +68,8 @@ struct timer_list mcfrs_timer_struct; - #define CONSOLE_BAUD_RATE 38400 - #define DEFAULT_CBAUD B38400 - #elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \ -- defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) -+ defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) || \ -+ defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X) - #define CONSOLE_BAUD_RATE 115200 - #define DEFAULT_CBAUD B115200 - #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \ -@@ -94,12 +102,17 @@ static struct tty_driver *mcfrs_serial_d - #undef SERIAL_DEBUG_FLOW - - #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ -- defined(CONFIG_M520x) || defined(CONFIG_M532x) -+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) || \ -+ defined(CONFIG_M547X_8X) - #define IRQBASE (MCFINT_VECBASE+MCFINT_UART0) - #else - #define IRQBASE 73 - #endif - -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+#define SERIAL_IRDA_LINE (2) -+#endif -+ - /* - * Configuration table, UARTs to look for at startup. - */ -@@ -114,7 +127,11 @@ static struct mcf_serial mcfrs_table[] = - { /* ttyS1 */ - .magic = 0, - .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2), -+#if defined(CONFIG_M547X_8X) -+ .irq = IRQBASE-1, -+#else - .irq = IRQBASE+1, -+#endif - .flags = ASYNC_BOOT_AUTOCONF, - }, - #endif -@@ -122,7 +139,11 @@ static struct mcf_serial mcfrs_table[] = - { /* ttyS2 */ - .magic = 0, - .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3), -+#if defined(CONFIG_M547X_8X) -+ .irq = IRQBASE-2, -+#else - .irq = IRQBASE+2, -+#endif - .flags = ASYNC_BOOT_AUTOCONF, - }, - #endif -@@ -130,7 +151,11 @@ static struct mcf_serial mcfrs_table[] = - { /* ttyS3 */ - .magic = 0, - .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4), -+#if defined(CONFIG_M547X_8X) -+ .irq = IRQBASE-3, -+#else - .irq = IRQBASE+3, -+#endif - .flags = ASYNC_BOOT_AUTOCONF, - }, - #endif -@@ -372,6 +397,9 @@ static inline void receive_chars(struct - static inline void transmit_chars(struct mcf_serial *info) - { - volatile unsigned char *uartp; -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ int i; -+#endif - - uartp = info->addr; - -@@ -383,13 +411,36 @@ static inline void transmit_chars(struct - } - - if ((info->xmit_cnt <= 0) || info->tty->stopped) { -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ if (info->line == SERIAL_IRDA_LINE) { -+ /* Enable receiver for IRDA */ -+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; -+ /* reset RX */ -+ uartp[MCFUART_UCR] = MCFUART_UCR_TXENABLE | MCFUART_UCR_RXENABLE; -+ } -+#endif - info->imr &= ~MCFUART_UIR_TXREADY; - uartp[MCFUART_UIMR] = info->imr; - return; - } - - while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) { -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ if (info->line == SERIAL_IRDA_LINE) { -+ while (!(uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)); -+ i = 0; -+ /* delay for settle */ -+#if defined(CONFIG_M548X) -+ udelay(1); -+#elif defined(CONFIG_M547X) -+ udelay(2); -+#else -+ while (i++ < 25000) udelay(1); -+#endif -+ } -+#endif - uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++]; -+ - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->stats.tx++; - if (--info->xmit_cnt <= 0) -@@ -409,7 +460,12 @@ irqreturn_t mcfrs_interrupt(int irq, voi - struct mcf_serial *info; - unsigned char isr; - -+/* JKM -- revisit! IRQ compute */ -+#if defined(CONFIG_M547X_8X) -+ info = &mcfrs_table[(IRQBASE - irq)]; -+#else - info = &mcfrs_table[(irq - IRQBASE)]; -+#endif - isr = info->addr[MCFUART_UISR] & info->imr; - - if (isr & MCFUART_UIR_RXREADY) -@@ -541,6 +597,28 @@ static int startup(struct mcf_serial * i - */ - mcfrs_change_speed(info); - -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ if (info->line == SERIAL_IRDA_LINE) { -+ /* Put PSC in IrDA mode */ -+ MCF_PSC_SICR(info->line) = MCF_PSC_SICR_SIM_SIR; -+ -+ /* Set pulse width to 1.6 uS */ -+ MCF_PSC_IRSDR(info->line) = (uint8_t) -+ (16 * (CONFIG_MCFCLK / 10000000)); -+ MCF_PSC_IRCR1(info->line) = MCF_PSC_IRCR1_SPUL; -+ MCF_PSC_IRCR2(info->line) = 0; -+ -+ /* Enable RTS to send */ -+ MCF_PSC_OPSET(info->line) = MCF_PSC_OPSET_RTS; -+ -+ /* Setup FIFO Alarms */ -+ MCF_PSC_RFAR(info->line) = MCF_PSC_RFAR_ALARM(248); -+ MCF_PSC_TFAR(info->line) = MCF_PSC_TFAR_ALARM(248); -+ -+ MCF_PSC_RFCR(info->line) = MCF_PSC_RFCR_FRMEN | MCF_PSC_RFCR_GR(4); -+ MCF_PSC_TFCR(info->line) = MCF_PSC_TFCR_FRMEN | MCF_PSC_RFCR_GR(4); -+ } -+#endif - /* - * Lastly enable the UART transmitter and receiver, and - * interrupt enables. -@@ -562,10 +640,20 @@ static void shutdown(struct mcf_serial * - { - volatile unsigned char *uartp; - unsigned long flags; -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ unsigned long delay_counter = 0; -+#endif - - if (!(info->flags & ASYNC_INITIALIZED)) - return; -- -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ uartp = (volatile unsigned char *) info->addr; -+ while (!(uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)) { -+ if(delay_counter++ > 25000) -+ break; -+ udelay(10); -+ } -+#endif - #ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....\n", info->line, - info->irq); -@@ -794,10 +882,19 @@ static int mcfrs_write(struct tty_struct - - local_irq_disable(); - uartp = info->addr; -+ -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ if (info->line == SERIAL_IRDA_LINE) { -+ /* Disable IRDA receiver*/ -+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ -+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ -+ -+ uartp[MCFUART_UCR] = MCFUART_UCR_TXENABLE; -+ } -+#endif - info->imr |= MCFUART_UIR_TXREADY; - uartp[MCFUART_UIMR] = info->imr; - local_irq_restore(flags); -- - return total; - } - -@@ -858,9 +955,21 @@ static void mcfrs_throttle(struct tty_st - - if (serial_paranoia_check(info, tty->name, "mcfrs_throttle")) - return; -- -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ if (I_IXOFF(tty)) { -+ /* Force STOP_CHAR (xoff) out */ -+ volatile unsigned char *uartp; -+ unsigned long flags; -+ uartp = (volatile unsigned char *) info->addr; -+ local_irq_save(flags); -+ info->imr |= MCFUART_UIR_TXREADY; -+ uartp[MCFUART_UIMR] = info->imr; -+ local_irq_restore(flags); -+ } -+#else - if (I_IXOFF(tty)) - info->x_char = STOP_CHAR(tty); -+#endif - - /* Turn off RTS line (do this atomic) */ - } -@@ -881,8 +990,22 @@ static void mcfrs_unthrottle(struct tty_ - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ else { -+ /* Force START_CHAR (xon) out */ -+ volatile unsigned char *uartp; -+ unsigned long flags; -+ info->x_char = START_CHAR(tty); -+ uartp = (volatile unsigned char *) info->addr; -+ local_irq_save(flags); -+ info->imr |= MCFUART_UIR_TXREADY; -+ uartp[MCFUART_UIMR] = info->imr; -+ local_irq_restore(flags); -+ } -+#else - else - info->x_char = START_CHAR(tty); -+#endif - } - - /* Assert RTS line (do this atomic) */ -@@ -1130,12 +1253,17 @@ static int mcfrs_ioctl(struct tty_struct - static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) - { - struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ int i = 0; /* hush GCC */ -+#endif - - if (tty->termios->c_cflag == old_termios->c_cflag) - return; - -+#ifdef CONFIG_SERIAL_COLDFIRE_IRDA -+ while (i++ < 35000) udelay(1); -+#endif - mcfrs_change_speed(info); -- - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; -@@ -1604,6 +1732,36 @@ static void mcfrs_irqinit(struct mcf_ser - /* GPIOs also must be initalized, depends on board */ - break; - } -+#elif defined(CONFIG_M5445X) -+ volatile unsigned char *uartp; -+ uartp = info->addr; -+ switch (info->line) { -+ case 0: -+ MCF_GPIO_PAR_UART |= 0x000F; -+ break; -+ case 1: -+ MCF_GPIO_PAR_UART |= 0x0FF0; -+ break; -+ case 2: -+ /* GPIOs also must be initalized, depends on board */ -+ break; -+ } -+#elif defined(CONFIG_M547X_8X) -+ volatile unsigned char *uartp; -+ uartp = (volatile unsigned char *)info->addr; -+ -+ if (info->line > 3) { -+ printk("SERIAL: don't know how to handle UART %d interrupt?\n", -+ info->line); -+ return; -+ } -+ -+ /* Set GPIO port register to enable PSC(port) signals */ -+ MCF_PAR_PSCn(info->line) = (0 -+ | MCF_PAR_PSC_TXD -+ | MCF_PAR_PSC_RXD); -+ -+ MCF_ICR(info->irq - 64) = ILP_PSCn(info->line); - #else - volatile unsigned char *icrp, *uartp; - -@@ -1966,7 +2124,9 @@ struct console mcfrs_console = { - - static int __init mcfrs_console_init(void) - { -+#if !(defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)) - register_console(&mcfrs_console); -+#endif - return 0; - } - ---- /dev/null -+++ b/drivers/spi/coldfire_edma.c -@@ -0,0 +1,446 @@ -+/* -+ * -+ * coldfire_edma.c - eDMA driver for Coldfire MCF5445x -+ * -+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <asm/virtconvert.h> -+#include <asm/coldfire.h> -+#include <linux/fs.h> -+#include <linux/cdev.h> -+#include <linux/seq_file.h> -+#include <linux/proc_fs.h> -+#ifdef CONFIG_M5445X -+#include <asm/mcf5445x_edma.h> -+#include <asm/mcf5445x_intc.h> -+#endif /* CONFIG_M5445X */ -+#include <asm/coldfire_edma.h> -+ -+/* -+ * Callback handler data for each TCD -+ */ -+struct edma_isr_record { -+ edma_irq_handler irq_handler; /* interrupt handler */ -+ edma_error_handler error_handler; /* error interrupt handler */ -+ void *arg; /* argument to pass back */ -+ int allocated; /* busy flag */ -+ spinlock_t *lock; /* spin lock (optional) */ -+ const char *device_id; /* dev id string, used in procfs */ -+}; -+ -+/* -+ * Device structure -+ */ -+struct coldfire_edma_dev { -+ struct cdev cdev; /* character device */ -+ struct edma_isr_record dma_interrupt_handlers[EDMA_CHANNELS]; -+}; -+ -+/* allocated major device number */ -+static int coldfire_dma_major; -+ -+/* device driver structure */ -+static struct coldfire_edma_dev *devp = NULL; -+ -+/* device driver file operations */ -+struct file_operations coldfire_edma_fops = { -+ .owner = THIS_MODULE, -+}; -+ -+/** -+ * dmaisr - eDMA channel interrupt handler -+ * @irq: interrupt number -+ * @dev_id: argument -+ */ -+static int dmaisr(int irq, void *dev_id) -+{ -+ int channel = irq - EDMA_INT_CONTROLLER_BASE - EDMA_INT_CHANNEL_BASE; -+ int result = IRQ_HANDLED; -+ -+ if ((devp != NULL) && -+ (devp->dma_interrupt_handlers[channel].irq_handler)) { -+ /* call user irq handler */ -+ if (devp->dma_interrupt_handlers[channel].lock) -+ spin_lock(devp->dma_interrupt_handlers[channel].lock); -+ -+ result = devp->dma_interrupt_handlers[channel].irq_handler( -+ channel, devp->dma_interrupt_handlers[channel].arg); -+ -+ if (devp->dma_interrupt_handlers[channel].lock) -+ spin_unlock(devp->dma_interrupt_handlers[channel].lock); -+ } else { -+ /* no irq handler so just ack it */ -+ confirm_edma_interrupt_handled(channel); -+ printk(EDMA_DRIVER_NAME ": No handler for DMA channel %d\n", -+ channel); -+ } -+ -+ return result; -+} -+ -+/** -+ * dma_error_isr - eDMA error interrupt handler -+ * @irq: interrupt number -+ * @dev_id: argument -+ */ -+static int dma_error_isr(int irq, void* dev_id) -+{ -+ u16 err; -+ int i; -+ -+ err = MCF_EDMA_ERR; -+ for (i=0; i<EDMA_CHANNELS; i++) { -+ if (err & (1<<i)) { -+ if (devp!=NULL && devp->dma_interrupt_handlers[i].error_handler) -+ devp->dma_interrupt_handlers[i].error_handler(i, devp->dma_interrupt_handlers[i].arg); -+ else -+ printk(KERN_WARNING EDMA_DRIVER_NAME ": DMA error on channel %d\n", i); -+ } -+ } -+ -+ MCF_EDMA_CERR = MCF_EDMA_CERR_CAER; -+ return IRQ_HANDLED; -+} -+ -+/** -+ * set_edma_params - Set transfer control descriptor (TCD) -+ * @channel: channel number -+ * @source: source address -+ * @dest: destination address -+ * @attr: attributes -+ * @soff: source offset -+ * @nbytes: number of bytes to be transfered in minor loop -+ * @slast: last source address adjustment -+ * @citer: major loop count -+ * @biter: beginning minor loop count -+ * @doff: destination offset -+ * @dlast_sga: last destination address adjustment -+ * @major_int: generate interrupt after each major loop -+ * @disable_req: disable DMA request after major loop -+ */ -+void set_edma_params(int channel, u32 source, u32 dest, -+ u32 attr, u32 soff, u32 nbytes, u32 slast, -+ u32 citer, u32 biter, u32 doff, u32 dlast_sga, -+ int major_int, int disable_req) -+{ -+ -+ if (channel<0 || channel>EDMA_CHANNELS) -+ return; -+ -+ MCF_EDMA_TCD_SADDR(channel) = source; -+ MCF_EDMA_TCD_DADDR(channel) = dest; -+ MCF_EDMA_TCD_ATTR(channel) = attr; -+ MCF_EDMA_TCD_SOFF(channel) = MCF_EDMA_TCD_SOFF_SOFF(soff); -+ MCF_EDMA_TCD_NBYTES(channel) = MCF_EDMA_TCD_NBYTES_NBYTES(nbytes); -+ MCF_EDMA_TCD_SLAST(channel) = MCF_EDMA_TCD_SLAST_SLAST(slast); -+ MCF_EDMA_TCD_CITER(channel) = MCF_EDMA_TCD_CITER_CITER(citer); -+ MCF_EDMA_TCD_BITER(channel)=MCF_EDMA_TCD_BITER_BITER(biter); -+ MCF_EDMA_TCD_DOFF(channel) = MCF_EDMA_TCD_DOFF_DOFF(doff); -+ MCF_EDMA_TCD_DLAST_SGA(channel) = MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga); -+ -+ /* interrupt at the end of major loop */ -+ if (major_int) -+ MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_INT_MAJOR; -+ else -+ MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_INT_MAJOR; -+ -+ /* disable request at the end of major loop of transfer or not*/ -+ if (disable_req) -+ MCF_EDMA_TCD_CSR(channel) |= MCF_EDMA_TCD_CSR_D_REQ; -+ else -+ MCF_EDMA_TCD_CSR(channel) &= ~MCF_EDMA_TCD_CSR_D_REQ; -+} -+EXPORT_SYMBOL(set_edma_params); -+ -+/** -+ * init_edma - Initialize the eDMA controller -+ */ -+void init_edma(void) -+{ -+ MCF_EDMA_CR = 0; -+} -+EXPORT_SYMBOL(init_edma); -+ -+/** -+ * request_edma_channel - Request an eDMA channel -+ * @channel: channel number -+ * @handler: dma handler -+ * @error_handler: dma error handler -+ * @arg: argument to pass back -+ * @lock: optional spinlock to hold over interrupt -+ * @device_id: device id -+ * -+ * Returns 0 if success or a negative value if failure -+ */ -+int request_edma_channel(int channel, -+ edma_irq_handler handler, -+ edma_error_handler error_handler, -+ void *arg, -+ spinlock_t *lock, -+ const char *device_id ) -+{ -+ if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) { -+ if (devp->dma_interrupt_handlers[channel].allocated) -+ return -EBUSY; -+ -+ devp->dma_interrupt_handlers[channel].allocated = 1; -+ devp->dma_interrupt_handlers[channel].irq_handler = handler; -+ devp->dma_interrupt_handlers[channel].error_handler = error_handler; -+ devp->dma_interrupt_handlers[channel].arg = arg; -+ devp->dma_interrupt_handlers[channel].lock = lock; -+ devp->dma_interrupt_handlers[channel].device_id = device_id; -+ return 0; -+ } -+ return -EINVAL; -+} -+EXPORT_SYMBOL(request_edma_channel); -+ -+/** -+ * set_edma_callback - Update the channel callback/arg -+ * @channel: channel number -+ * @handler: dma handler -+ * @error_handler: dma error handler -+ * @arg: argument to pass back -+ * -+ * Returns 0 if success or a negative value if failure -+ */ -+int set_edma_callback(int channel, -+ edma_irq_handler handler, -+ edma_error_handler error_handler, -+ void *arg ) -+{ -+ if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS && -+ devp->dma_interrupt_handlers[channel].allocated) { -+ devp->dma_interrupt_handlers[channel].irq_handler = handler; -+ devp->dma_interrupt_handlers[channel].error_handler = error_handler; -+ devp->dma_interrupt_handlers[channel].arg = arg; -+ return 0; -+ } -+ return -EINVAL; -+} -+EXPORT_SYMBOL(set_edma_callback); -+ -+/** -+ * free_edma_channel - Free the edma channel -+ * @channel: channel number -+ * @arg: argument created with -+ * -+ * Returns 0 if success or a negative value if failure -+ */ -+int free_edma_channel(int channel, void *arg) -+{ -+ if (devp!=NULL && channel>=0 && channel<=EDMA_CHANNELS) { -+ if (devp->dma_interrupt_handlers[channel].allocated) { -+#if 0 -+ if (devp->dma_interrupt_handlers[channel].arg != arg) -+ return -EBUSY; -+#endif -+ -+ devp->dma_interrupt_handlers[channel].allocated = 0; -+ devp->dma_interrupt_handlers[channel].arg = NULL; -+ devp->dma_interrupt_handlers[channel].irq_handler = NULL; -+ devp->dma_interrupt_handlers[channel].error_handler = NULL; -+ devp->dma_interrupt_handlers[channel].lock = NULL; -+ } -+ return 0; -+ } -+ return -EINVAL; -+} -+EXPORT_SYMBOL(free_edma_channel); -+ -+/** -+ * coldfire_edma_cleanup - cleanup driver allocated resources -+ */ -+static void coldfire_edma_cleanup(void) -+{ -+ dev_t devno; -+ int i; -+ -+ /* free interrupts/memory */ -+ if (devp) { -+ for (i=0; i<EDMA_CHANNELS; i++) -+ free_irq(EDMA_INT_BASE+i, devp); -+ -+ free_irq(EDMA_INT_BASE+EDMA_INT_ERR, devp); -+ cdev_del(&devp->cdev); -+ kfree(devp); -+ } -+ -+ /* unregister character device */ -+ devno = MKDEV(coldfire_dma_major, 0); -+ unregister_chrdev_region(devno, 1); -+} -+ -+#ifdef CONFIG_PROC_FS -+/* -+ * proc file system support -+ */ -+ -+#define FREE_CHANNEL "free" -+#define DEVICE_UNKNOWN "device unknown" -+ -+/** -+ * proc_edma_show - print out proc info -+ * @m: seq_file -+ * @v: -+ */ -+static int proc_edma_show(struct seq_file *m, void *v) -+{ -+ int i; -+ -+ if (devp == NULL) -+ return 0; -+ -+ for (i = 0 ; i < EDMA_CHANNELS ; i++) { -+ if (devp->dma_interrupt_handlers[i].allocated) { -+ if (devp->dma_interrupt_handlers[i].device_id) -+ seq_printf(m, "%2d: %s\n", i, devp->dma_interrupt_handlers[i].device_id); -+ else -+ seq_printf(m, "%2d: %s\n", i, DEVICE_UNKNOWN); -+ } else -+ seq_printf(m, "%2d: %s\n", i, FREE_CHANNEL); -+ } -+ return 0; -+} -+ -+/** -+ * proc_edma_open - open the proc file -+ * @inode: inode ptr -+ * @file: file ptr -+ */ -+static int proc_edma_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, proc_edma_show, NULL); -+} -+ -+static const struct file_operations proc_edma_operations = { -+ .open = proc_edma_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+/** -+ * proc_edma_init - initialize proc filesystem -+ */ -+static int __init proc_edma_init(void) -+{ -+ struct proc_dir_entry *e; -+ -+ e = create_proc_entry("edma", 0, NULL); -+ if (e) -+ e->proc_fops = &proc_edma_operations; -+ -+ return 0; -+} -+ -+#endif -+ -+/** -+ * coldfire_edma_init - eDMA module init -+ */ -+static int __init coldfire_edma_init(void) -+{ -+ dev_t dev; -+ int result; -+ int i; -+ -+ /* allocate free major number */ -+ result = alloc_chrdev_region(&dev, DMA_DEV_MINOR, 1, EDMA_DRIVER_NAME); -+ if (result < 0) { -+ printk(KERN_WARNING EDMA_DRIVER_NAME": can't get major %d\n", -+ result); -+ return result; -+ } -+ coldfire_dma_major = MAJOR(dev); -+ -+ /* allocate device driver structure */ -+ devp = kmalloc(sizeof(struct coldfire_edma_dev), GFP_KERNEL); -+ if (!devp) { -+ result = -ENOMEM; -+ goto fail; -+ } -+ -+ /* init handlers (no handlers for beginning) */ -+ for (i = 0; i < EDMA_CHANNELS; i++) { -+ devp->dma_interrupt_handlers[i].irq_handler = NULL; -+ devp->dma_interrupt_handlers[i].error_handler = NULL; -+ devp->dma_interrupt_handlers[i].arg = NULL; -+ devp->dma_interrupt_handlers[i].allocated = 0; -+ devp->dma_interrupt_handlers[i].lock = NULL; -+ devp->dma_interrupt_handlers[i].device_id = NULL; -+ } -+ -+ /* register char device */ -+ cdev_init(&devp->cdev, &coldfire_edma_fops); -+ devp->cdev.owner = THIS_MODULE; -+ devp->cdev.ops = &coldfire_edma_fops; -+ result = cdev_add(&devp->cdev, dev, 1); -+ if (result) { -+ printk(KERN_NOTICE EDMA_DRIVER_NAME -+ ": Error %d adding coldfire-dma device\n", result); -+ result = -ENODEV; -+ goto fail; -+ } -+ -+ /* request/enable irq for each eDMA channel */ -+ for (i = 0; i < EDMA_CHANNELS;i++) { -+ result = request_irq(EDMA_INT_BASE + i, -+ dmaisr, IRQF_DISABLED, -+ EDMA_DRIVER_NAME, devp); -+ if (result) { -+ printk(KERN_WARNING EDMA_DRIVER_NAME -+ ": Cannot request irq %d\n", -+ (EDMA_INT_BASE + EDMA_INT_ERR+i)); -+ result = -EBUSY; -+ goto fail; -+ } -+ } -+ -+ /* request error interrupt */ -+ result = request_irq(EDMA_INT_BASE + EDMA_INT_ERR, -+ dma_error_isr, IRQF_DISABLED, -+ EDMA_DRIVER_NAME, devp); -+ if (result) { -+ printk(KERN_WARNING EDMA_DRIVER_NAME -+ ": Cannot request irq %d\n", -+ (EDMA_INT_BASE + EDMA_INT_ERR)); -+ result = -EBUSY; -+ goto fail; -+ } -+ -+#ifdef CONFIG_PROC_FS -+ proc_edma_init(); -+#endif -+ -+ printk(EDMA_DRIVER_NAME ": initialized successfully\n"); -+ return 0; -+fail: -+ coldfire_edma_cleanup(); -+ return result; -+} -+ -+/** -+ * coldfire_edma_exit - eDMA module exit -+ */ -+static void __exit coldfire_edma_exit(void) -+{ -+ coldfire_edma_cleanup(); -+} -+ -+module_init(coldfire_edma_init); -+module_exit(coldfire_edma_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Freescale Semiconductor, Inc."); -+MODULE_DESCRIPTION("eDMA library for Coldfire M5445x"); ---- /dev/null -+++ b/drivers/spi/dspi_mcf.c -@@ -0,0 +1,1217 @@ -+/* -+ * dspi_mcf.c - DSPI controller for ColdFire processors -+ * -+ * -+ * Matt Waddel Matt.Waddel@freescale.com -+ * Copyright Freescale Semiconductor, Inc. 2008 -+ * -+ * M547x/M548x changes by Kurt Mahan kmahan@freescale.com -+ * Copyright Freescale Semiconductor, Inc. 2008 -+ * -+ * Based on spi_coldfire.c done by: -+ * Andrey Butok -+ * Yaroslav Vinogradov -+ * Copyright Freescale Semiconductor, Inc. 2006-2007 -+ * Mike Lavender (mike@steroidmicros) -+ * (C) Copyright 2005, Intec Automation, -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.002 M547x/M548x support. -+ * v0.001 Initial version. Coldfire DSPI master driver. -+ ****************************************************************************/ -+ -+/* -+ * Includes -+ */ -+ -+#include <linux/autoconf.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/device.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/workqueue.h> -+#include <linux/delay.h> -+#include <asm/mcfsim.h> -+#include <asm/mcfqspi.h> -+#include <asm/coldfire.h> -+#include <linux/io.h> -+#include <asm/mcfdspi.h> -+#include <linux/dma-mapping.h> -+ -+#undef DSPI_COLDFIRE_DEBUG -+ -+#ifdef DSPI_COLDFIRE_DEBUG -+#define DBG(fmt, args...) \ -+ printk(KERN_INFO "[%s] " fmt , __FUNCTION__, ## args) -+#else -+#define DBG(fmt, args...) do {} while (0) -+#endif -+ -+#if defined(CONFIG_M54455) -+#include <asm/mcf5445x_dspi.h> -+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA) -+ #include <asm/mcf5445x_edma.h> -+#endif -+#endif -+ -+#if defined(CONFIG_M547X_8X) -+#include <asm/virtconvert.h> -+#include <asm/m5485dspi.h> -+#endif -+ -+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA) -+#include <asm/mcf_edma.h> -+#define SPI_DSPI_EDMA -+#define EDMA_BUFSIZE_KMALLOC (DSPI_FIFO_SIZE*4) -+#define DSPI_DMA_RX_TCD MCF_EDMA_CHAN_DSPI_RX -+#define DSPI_DMA_TX_TCD MCF_EDMA_CHAN_DSPI_TX -+#endif -+ -+#define DSPI_BITS MCF_DSPI_DCTAR_FMSZ(0xF) -+#define DSPI_BITS_16 MCF_DSPI_DCTAR_FMSZ(0xF) -+#define DSPI_BITS_8 MCF_DSPI_DCTAR_FMSZ(0x7) -+#define DSPI_FIFO_SIZE 16 -+ -+#define DRIVER_NAME "Coldfire DSPI" -+ -+/****************************************************************************/ -+ -+/* -+ * Local constants and macros -+ */ -+ -+#define START_STATE ((void *)0) -+#define RUNNING_STATE ((void *)1) -+#define DONE_STATE ((void *)2) -+#define ERROR_STATE ((void *)-1) -+ -+#define QUEUE_RUNNING 0 -+#define QUEUE_STOPPED 1 -+ -+/****************************************************************************/ -+ -+/* -+ * Local Data Structures -+ */ -+ -+struct DSPI_MCR { -+ unsigned master:1; -+ unsigned cont_scke:1; -+ unsigned dconf:2; -+ unsigned frz:1; -+ unsigned mtfe:1; -+ unsigned pcsse:1; -+ unsigned rooe:1; -+ unsigned pcsis:8; -+ unsigned reserved15:1; -+ unsigned mdis:1; -+ unsigned dis_tx:1; -+ unsigned dis_rxf:1; -+ unsigned clr_tx:1; -+ unsigned clr_rxf:1; -+ unsigned smpl_pt:2; -+ unsigned reserved71:7; -+ unsigned halt:1; -+}; -+ -+struct DSPI_CTAR { -+ unsigned dbr:1; -+ unsigned fmsz:4; -+ unsigned cpol:1; -+ unsigned cpha:1; -+ unsigned lsbfe:1; -+ unsigned pcssck:2; -+ unsigned pasc:2; -+ unsigned pdt:2; -+ unsigned pbr:2; -+ unsigned cssck:4; -+ unsigned asc:4; -+ unsigned dt:4; -+ unsigned br:4; -+}; -+ -+struct chip_data { -+ /* dspi data */ -+ union { -+ u32 mcr_val; -+ struct DSPI_MCR mcr; -+ }; -+ union { -+ u32 ctar_val; -+ struct DSPI_CTAR ctar; -+ }; -+ u16 void_write_data; -+}; -+ -+ -+struct driver_data { -+ /* Driver model hookup */ -+ struct platform_device *pdev; -+ -+ /* SPI framework hookup */ -+ struct spi_master *master; -+ -+ /* Driver message queue */ -+ struct workqueue_struct *workqueue; -+ struct work_struct pump_messages; -+ spinlock_t lock; /* lock */ -+ struct list_head queue; -+ int busy; -+ int run; -+ -+ /* Message Transfer pump */ -+ struct tasklet_struct pump_transfers; -+ -+ /* Current message transfer state info */ -+ struct spi_message *cur_msg; -+ struct spi_transfer *cur_transfer; -+ struct chip_data *cur_chip; -+ size_t len; -+ void *tx; -+ void *tx_end; -+ void *rx; -+ void *rx_end; -+ char flags; -+#define TRAN_STATE_RX_VOID 0x01 -+#define TRAN_STATE_TX_VOID 0x02 -+#define TRAN_STATE_WORD_ODD_NUM 0x04 -+ u8 cs; -+ u16 void_write_data; -+ unsigned cs_change:1; -+ -+ u32 trans_cnt; -+ u32 wce_cnt; -+ u32 abrt_cnt; -+ u32 *mcr; /* DSPI MCR register */ -+ u32 *ctar; /* DSPI CTAR register */ -+ u32 *dspi_dtfr; /* DSPI DTFR register */ -+ u32 *dspi_drfr; /* DSPI DRFR register */ -+ u32 *dspi_rser; /* DSPI RSER register */ -+ u32 *dspi_sr; /* DSPI status register */ -+ -+#if defined(SPI_DSPI_EDMA) -+ void *edma_tx_buf; -+ void *edma_rx_buf; -+#endif -+ -+#if defined(CONFIG_M532x) || defined(CONFIG_M537x) -+ u16 *par; /* Pin assignment register */ -+#else -+ u8 *par; /* Pin assignment register */ -+#endif -+ u8 *int_icr; /* Interrupt level and priority register */ -+ u32 *int_mr; /* Interrupt mask register */ -+ void (*cs_control)(u8 cs, u8 command); -+}; -+ -+#define DSPI_CS(cs) ((1<<(cs))<<16) -+ -+/****************************************************************************/ -+ -+/* -+ * SPI local functions -+ */ -+ -+static void *next_transfer(struct driver_data *drv_data) -+{ -+ struct spi_message *msg = drv_data->cur_msg; -+ struct spi_transfer *trans = drv_data->cur_transfer; -+ -+ DBG("\n"); -+ /* Move to next transfer */ -+ if (trans->transfer_list.next != &msg->transfers) { -+ drv_data->cur_transfer = list_entry(trans->transfer_list.next, -+ struct spi_transfer, -+ transfer_list); -+ -+ if (drv_data->cur_transfer->transfer_list.next -+ == &msg->transfers) /* last transfer */ -+ drv_data->cur_transfer->cs_change = 1; -+ -+ return RUNNING_STATE; -+ } else -+ return DONE_STATE; -+} -+ -+ -+static inline int is_word_transfer(struct driver_data *drv_data) -+{ -+ return ((*(drv_data->ctar+drv_data->cs) & DSPI_BITS_16) == -+ DSPI_BITS_8) ? 0 : 1; -+} -+ -+static inline void set_8bit_transfer_mode(struct driver_data *drv_data) -+{ -+ DBG("\n"); -+ *(drv_data->ctar+drv_data->cs) = -+ (*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_8; -+} -+ -+static inline void set_16bit_transfer_mode(struct driver_data *drv_data) -+{ -+ DBG("\n"); -+ *(drv_data->ctar+drv_data->cs) = -+ (*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_16; -+} -+ -+static unsigned char hz_to_spi_baud(int pbr, int dbr, int speed_hz) -+{ -+ int pbr_tbl[4] = {2, 3, 5, 7}; /* Valid baud rate pre-scaler values */ -+ int brs[16] = { 2, 4, 6, 8, -+ 16, 32, 64, 128, -+ 256, 512, 1024, 2048, -+ 4096, 8192, 16384, 32768 }; -+ int temp, index = 0; -+ -+ if ((pbr < 0) || (pbr > 3) || -+ (dbr < 0) || (dbr > 1)) -+ return 15; /* table indexes out of range, go slow */ -+ -+ temp = ((((MCF_CLK / 2) / pbr_tbl[pbr]) * (1 + dbr)) / speed_hz); -+ -+ while (temp >= brs[index]) -+ if (index++ >= 15) -+ break; -+ -+ DBG("baud rate scaler = 0x%x - %d\n", index, brs[index]); -+ return(index); -+} -+ -+static int write(struct driver_data *drv_data) -+{ -+ int tx_count = 0; -+ int tx_word = is_word_transfer(drv_data); -+ u16 d16; -+ u8 d8; -+ u32 dspi_pushr = 0; -+ int first = 1; -+#if defined(SPI_DSPI_EDMA) -+ u32 *edma_wr = (u32 *)(drv_data->edma_tx_buf); -+#endif -+ -+ /* If we are in word mode, but only have a single byte to transfer -+ * then switch to byte mode temporarily. Will switch back at the -+ * end of the transfer. */ -+ if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) { -+ drv_data->flags |= TRAN_STATE_WORD_ODD_NUM; -+ set_8bit_transfer_mode(drv_data); -+ tx_word = 0; -+ } -+ -+ while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) { -+// DBG("while\n"); -+ if (tx_word) { -+ if ((drv_data->tx_end - drv_data->tx) == 1) -+ break; -+ -+ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) -+ d16 = *(u16 *)drv_data->tx; -+ else -+ d16 = drv_data->void_write_data; -+ -+ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) | -+ DSPI_CS(drv_data->cs) | -+ MCF_DSPI_DTFR_CTAS(drv_data->cs) | -+ MCF_DSPI_DTFR_CONT; -+ -+ drv_data->tx += 2; -+ } else { -+ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) -+ d8 = *(u8 *)drv_data->tx; -+ else -+ d8 = *(u8 *)&drv_data->void_write_data; -+ -+ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) | -+ DSPI_CS(drv_data->cs) | -+ MCF_DSPI_DTFR_CTAS(drv_data->cs) | -+ MCF_DSPI_DTFR_CONT; -+ -+ drv_data->tx++; -+ } -+ -+ if (drv_data->tx == drv_data->tx_end -+ || tx_count == DSPI_FIFO_SIZE-1) { -+ /* last transfer in the queue */ -+ dspi_pushr |= MCF_DSPI_DTFR_EOQ; -+ if ((drv_data->cs_change) -+ && (drv_data->tx == drv_data->tx_end)) -+ dspi_pushr &= ~MCF_DSPI_DTFR_CONT; -+#ifdef CONFIG_M547X_8X -+ /* EOQ gets missed if we don't delay */ -+ udelay(100); -+#endif -+ } else if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) -+ dspi_pushr |= MCF_DSPI_DTFR_EOQ; -+ -+ if (first) { -+ first = 0; -+ dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */ -+ } -+#if defined(SPI_DSPI_EDMA) -+ *edma_wr = dspi_pushr; -+ edma_wr++; -+#else -+ *drv_data->dspi_dtfr = dspi_pushr; -+#endif -+ tx_count++; -+ } -+ -+#if defined(SPI_DSPI_EDMA) -+ if (tx_count > 0) { -+ -+ mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD, -+ virt_to_phys(drv_data->edma_tx_buf), -+ (u32)drv_data->dspi_dtfr, -+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT -+ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, -+ 4, /* soff */ -+ 4 * tx_count, /* nbytes */ -+ 0, /* slast */ -+ 1, /* citer */ -+ 1, /* biter */ -+ 0, /* doff */ -+ 0, /* dlastsga */ -+ 0, /* major_int */ -+ 1); /* disable_req */ -+ -+ mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD, -+ (u32)drv_data->dspi_drfr, -+ virt_to_phys(drv_data->edma_rx_buf), -+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT -+ | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, -+ 0, /* soff */ -+ 4 * tx_count, /* nbytes */ -+ 0, /* slast */ -+ 1, /* citer */ -+ 1, /* biter */ -+ 4, /* doff */ -+ 0, /* dlastsga */ -+ 0, /* major_int */ -+ 1); /* disable_req */ -+ -+ mcf_edma_start_transfer(DSPI_DMA_TX_TCD); -+ } -+#endif -+ return (tx_count * (tx_word + 1)); -+} -+ -+static int read(struct driver_data *drv_data) -+{ -+ int rx_count = 0; -+ int rx_word = is_word_transfer(drv_data); -+ u16 d; -+#if defined(SPI_DSPI_EDMA) -+ u32 *rx_edma = (u32 *) drv_data->edma_rx_buf; -+ -+ /* receive SPI data */ -+ mcf_edma_start_transfer(DSPI_DMA_RX_TCD); -+#endif -+ while ((drv_data->rx < drv_data->rx_end) -+ && (rx_count < DSPI_FIFO_SIZE)) { -+ -+ if (rx_word) { -+ if ((drv_data->rx_end - drv_data->rx) == 1) -+ break; -+#if defined(SPI_DSPI_EDMA) -+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma); -+ rx_edma++; -+#else -+ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr); -+#endif -+ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) -+ *(u16 *)drv_data->rx = d; -+ drv_data->rx += 2; -+ -+ } else { -+#if defined(SPI_DSPI_EDMA) -+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma); -+ rx_edma++; -+#else -+ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr); -+#endif -+ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) -+ *(u8 *)drv_data->rx = d; -+ drv_data->rx++; -+ } -+ rx_count++; -+ DBG("rxd=0x%x\n", d); -+ } -+ return rx_count; -+} -+ -+ -+static inline void dspi_setup_chip(struct driver_data *drv_data) -+{ -+ struct chip_data *chip = drv_data->cur_chip; -+ -+ DBG("\n"); -+ *drv_data->mcr = chip->mcr_val; -+ *(drv_data->ctar+drv_data->cs) = chip->ctar_val; -+ *drv_data->dspi_rser = MCF_DSPI_DRSER_EOQFE; -+} -+ -+#if defined(SPI_DSPI_EDMA) -+static int edma_tx_handler(int channel, void *dev) -+{ -+ DBG("\n"); -+ if (channel == DSPI_DMA_TX_TCD) -+ mcf_edma_stop_transfer(DSPI_DMA_TX_TCD); -+ return IRQ_HANDLED; -+} -+ -+static int edma_rx_handler(int channel, void *dev) -+{ -+ DBG("\n"); -+ if (channel == DSPI_DMA_RX_TCD) -+ mcf_edma_stop_transfer(DSPI_DMA_RX_TCD); -+ return IRQ_HANDLED; -+} -+#endif -+ -+static irqreturn_t dspi_interrupt(int irq, void *dev_id) -+{ -+ struct driver_data *drv_data = (struct driver_data *)dev_id; -+ struct spi_message *msg = drv_data->cur_msg; -+ -+ /* Clear all flags immediately */ -+ *drv_data->dspi_sr = MCF_DSPI_DSR_EOQF; -+ -+ if (!drv_data->cur_msg || !drv_data->cur_msg->state) { -+#if !defined(SPI_DSPI_EDMA) -+ u32 irq_status = *drv_data->dspi_sr; -+ /* if eDMA is used it happens some time (at least once)*/ -+ printk(KERN_ERR "Bad message or transfer state handler. \ -+ IRQ status = %x\n", irq_status); -+#endif -+ return IRQ_NONE; -+ } -+ -+ DBG("\n"); -+ /* -+ * Read the data into the buffer and reload and start -+ * queue with new data if not finished. If finished -+ * then setup the next transfer -+ */ -+ read(drv_data); -+ -+ if (drv_data->rx == drv_data->rx_end) { -+ /* -+ * Finished now - fall through and schedule next -+ * transfer tasklet -+ */ -+ if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM) -+ set_16bit_transfer_mode(drv_data); -+ -+ msg->state = next_transfer(drv_data); -+ } else { -+ /* not finished yet - keep going */ -+ msg->actual_length += write(drv_data); -+ return IRQ_HANDLED; -+ } -+ -+ tasklet_schedule(&drv_data->pump_transfers); -+ -+ return IRQ_HANDLED; -+} -+ -+/* caller already set message->status; dma and pio irqs are blocked */ -+static void giveback(struct driver_data *drv_data) -+{ -+ struct spi_transfer *last_transfer; -+ unsigned long flags; -+ struct spi_message *msg; -+ DBG("\n"); -+ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ msg = drv_data->cur_msg; -+ drv_data->cur_msg = NULL; -+ drv_data->cur_transfer = NULL; -+ drv_data->cur_chip = NULL; -+ queue_work(drv_data->workqueue, &drv_data->pump_messages); -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ -+ last_transfer = list_entry(msg->transfers.prev, -+ struct spi_transfer, transfer_list); -+ -+ if (!last_transfer->cs_change) -+ drv_data->cs_control(drv_data->cs, QSPI_CS_DROP); -+ -+ msg->state = NULL; -+ if (msg->complete) -+ msg->complete(msg->context); -+} -+ -+ -+static void pump_transfers(unsigned long data) -+{ -+ struct driver_data *drv_data = (struct driver_data *)data; -+ struct spi_message *message = NULL; -+ struct spi_transfer *transfer = NULL; -+ struct spi_transfer *previous = NULL; -+ struct chip_data *chip = NULL; -+ unsigned long flags; -+ DBG("\n"); -+ /* Get current state information */ -+ message = drv_data->cur_msg; -+ transfer = drv_data->cur_transfer; -+ chip = drv_data->cur_chip; -+ -+ /* Handle for abort */ -+ if (message->state == ERROR_STATE) { -+ message->status = -EIO; -+ giveback(drv_data); -+ return; -+ } -+ -+ /* Handle end of message */ -+ if (message->state == DONE_STATE) { -+ message->status = 0; -+ giveback(drv_data); -+ return; -+ } -+ -+ if (message->state == START_STATE) { -+ dspi_setup_chip(drv_data); -+ -+ if (drv_data->cs_control) -+ drv_data->cs_control(message->spi->chip_select, -+ QSPI_CS_ASSERT); -+ } -+ -+ /* Delay if requested at end of transfer*/ -+ if (message->state == RUNNING_STATE) { -+ previous = list_entry(transfer->transfer_list.prev, -+ struct spi_transfer, -+ transfer_list); -+ -+ if (drv_data->cs_control && transfer->cs_change) -+ drv_data->cs_control(message->spi->chip_select, -+ QSPI_CS_DROP); -+ -+ if (previous->delay_usecs) -+ udelay(previous->delay_usecs); -+ -+ if (drv_data->cs_control && transfer->cs_change) -+ drv_data->cs_control(message->spi->chip_select, -+ QSPI_CS_ASSERT); -+ } -+ -+ drv_data->flags = 0; -+ drv_data->tx = (void *)transfer->tx_buf; -+ drv_data->tx_end = drv_data->tx + transfer->len; -+ drv_data->rx = transfer->rx_buf; -+ drv_data->rx_end = drv_data->rx + transfer->len; -+ -+ if (!drv_data->rx) -+ drv_data->flags |= TRAN_STATE_RX_VOID; -+ if (!drv_data->tx) -+ drv_data->flags |= TRAN_STATE_TX_VOID; -+ drv_data->cs = message->spi->chip_select; -+ drv_data->cs_change = transfer->cs_change; -+ drv_data->void_write_data = chip->void_write_data; -+ if (transfer->speed_hz) { -+ *(drv_data->ctar + drv_data->cs) = \ -+ ((chip->ctar_val & ~0xF) | \ -+ hz_to_spi_baud(chip->ctar.pbr, \ -+ chip->ctar.dbr, \ -+ transfer->speed_hz)); -+ } -+ -+ message->state = RUNNING_STATE; -+ /* Go baby, go */ -+ local_irq_save(flags); -+ message->actual_length += write(drv_data); -+ local_irq_restore(flags); -+} -+ -+ -+static void pump_messages(struct work_struct *work) -+{ -+ struct driver_data *drv_data; -+ unsigned long flags; -+ DBG("\n"); -+ -+ drv_data = container_of(work, struct driver_data, pump_messages); -+ -+ /* Lock queue and check for queue work */ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ if (list_empty(&drv_data->queue) -+ || drv_data->run == QUEUE_STOPPED) { -+ drv_data->busy = 0; -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ return; -+ } -+ -+ /* Make sure we are not already running a message */ -+ if (drv_data->cur_msg) { -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ return; -+ } -+ -+ /* Extract head of queue */ -+ drv_data->cur_msg = list_entry(drv_data->queue.next, -+ struct spi_message, queue); -+ list_del_init(&drv_data->cur_msg->queue); -+ -+ /* Initial message state*/ -+ drv_data->cur_msg->state = START_STATE; -+ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, -+ struct spi_transfer, -+ transfer_list); -+ -+ if (drv_data->cur_transfer->transfer_list.next -+ == &drv_data->cur_msg->transfers) -+ drv_data->cur_transfer->cs_change = 1; /* last */ -+ -+ -+ /* Setup the SPI Registers using the per chip configuration */ -+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); -+ -+ /* Mark as busy and launch transfers */ -+ tasklet_schedule(&drv_data->pump_transfers); -+ -+ drv_data->busy = 1; -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+} -+ -+/****************************************************************************/ -+ -+/* -+ * SPI master implementation -+ */ -+ -+static int transfer(struct spi_device *spi, struct spi_message *msg) -+{ -+ struct driver_data *drv_data = spi_master_get_devdata(spi->master); -+ unsigned long flags; -+ -+ DBG("\n"); -+ spin_lock_irqsave(&drv_data->lock, flags); -+ -+ if (drv_data->run == QUEUE_STOPPED) { -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ return -ESHUTDOWN; -+ } -+ -+ msg->actual_length = 0; -+ msg->status = -EINPROGRESS; -+ msg->state = START_STATE; -+ -+ list_add_tail(&msg->queue, &drv_data->queue); -+ -+ if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) -+ queue_work(drv_data->workqueue, &drv_data->pump_messages); -+ -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ -+ return 0; -+} -+ -+ -+static int setup(struct spi_device *spi) -+{ -+ -+ struct chip_data *chip; -+ struct coldfire_dspi_chip *chip_info -+ = (struct coldfire_dspi_chip *)spi->controller_data; -+ DBG("\n"); -+ -+ /* Only alloc on first setup */ -+ chip = spi_get_ctldata(spi); -+ if (chip == NULL) { -+ chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL); -+ if (!chip) -+ return -ENOMEM; -+ spi->mode = chip_info->mode; -+ spi->bits_per_word = chip_info->bits_per_word; -+ } -+ -+ chip->mcr.master = 1; -+ chip->mcr.cont_scke = 0; -+ chip->mcr.dconf = 0; -+ chip->mcr.frz = 0; -+ chip->mcr.mtfe = 0; -+ chip->mcr.pcsse = 0; -+ chip->mcr.rooe = 0; -+ chip->mcr.pcsis = 0xFF; -+ chip->mcr.reserved15 = 0; -+ chip->mcr.mdis = 0; -+ chip->mcr.dis_tx = 0; -+ chip->mcr.dis_rxf = 0; -+ chip->mcr.clr_tx = 1; -+ chip->mcr.clr_rxf = 1; -+ chip->mcr.smpl_pt = 0; -+ chip->mcr.reserved71 = 0; -+ chip->mcr.halt = 0; -+ -+ if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) { -+ chip->ctar.fmsz = spi->bits_per_word-1; -+ } else { -+ printk(KERN_ERR "Invalid wordsize\n"); -+ kfree(chip); -+ return -ENODEV; -+ } -+ -+ chip->void_write_data = chip_info->void_write_data; -+ -+ if (spi->max_speed_hz != 0) -+ chip_info->br = hz_to_spi_baud(chip_info->pbr, chip_info->dbr, \ -+ spi->max_speed_hz); -+ -+ chip->ctar.cpha = (spi->mode & SPI_CPHA) ? 1 : 0; -+ chip->ctar.cpol = (spi->mode & SPI_CPOL) ? 1 : 0; -+ chip->ctar.lsbfe = (spi->mode & SPI_LSB_FIRST) ? 1 : 0; -+ chip->ctar.dbr = chip_info->dbr; -+ chip->ctar.pbr = chip_info->pbr; -+ chip->ctar.br = chip_info->br; -+ chip->ctar.pcssck = chip_info->pcssck; -+ chip->ctar.pasc = chip_info->pasc; -+ chip->ctar.pdt = chip_info->pdt; -+ chip->ctar.cssck = chip_info->cssck; -+ chip->ctar.asc = chip_info->asc; -+ chip->ctar.dt = chip_info->dt; -+ -+ spi_set_ctldata(spi, chip); -+ -+ return 0; -+} -+ -+static int init_queue(struct driver_data *drv_data) -+{ -+ INIT_LIST_HEAD(&drv_data->queue); -+ spin_lock_init(&drv_data->lock); -+ -+ drv_data->run = QUEUE_STOPPED; -+ drv_data->busy = 0; -+ -+ tasklet_init(&drv_data->pump_transfers, -+ pump_transfers, (unsigned long)drv_data); -+ -+ INIT_WORK(&drv_data->pump_messages, pump_messages); -+ -+ drv_data->workqueue = create_singlethread_workqueue( -+ drv_data->master->dev.parent->bus_id); -+ if (drv_data->workqueue == NULL) -+ return -EBUSY; -+ -+ return 0; -+} -+ -+static int start_queue(struct driver_data *drv_data) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ -+ if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ return -EBUSY; -+ } -+ -+ drv_data->run = QUEUE_RUNNING; -+ drv_data->cur_msg = NULL; -+ drv_data->cur_transfer = NULL; -+ drv_data->cur_chip = NULL; -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ -+ queue_work(drv_data->workqueue, &drv_data->pump_messages); -+ -+ return 0; -+} -+ -+static int stop_queue(struct driver_data *drv_data) -+{ -+ unsigned long flags; -+ unsigned limit = 500; -+ int status = 0; -+ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ -+ /* This is a bit lame, but is optimized for the common execution path. -+ * A wait_queue on the drv_data->busy could be used, but then the common -+ * execution path (pump_messages) would be required to call wake_up or -+ * friends on every SPI message. Do this instead */ -+ drv_data->run = QUEUE_STOPPED; -+ while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ msleep(10); -+ spin_lock_irqsave(&drv_data->lock, flags); -+ } -+ -+ if (!list_empty(&drv_data->queue) || drv_data->busy) -+ status = -EBUSY; -+ -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ -+ return status; -+} -+ -+static int destroy_queue(struct driver_data *drv_data) -+{ -+ int status; -+ -+ status = stop_queue(drv_data); -+ if (status != 0) -+ return status; -+ -+ destroy_workqueue(drv_data->workqueue); -+ -+ return 0; -+} -+ -+ -+static void cleanup(struct spi_device *spi) -+{ -+ struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); -+ -+ dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n", -+ spi->master->bus_num, spi->chip_select); -+ -+ kfree(chip); -+} -+ -+ -+/****************************************************************************/ -+ -+/* -+ * Generic Device driver routines and interface implementation -+ */ -+ -+static int coldfire_spi_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct coldfire_spi_master *platform_info; -+ struct spi_master *master; -+ struct driver_data *drv_data = 0; -+ struct resource *memory_resource; -+ int irq; -+ int status = 0; -+ int i; -+#if defined(SPI_DSPI_EDMA) -+ dma_addr_t dma_handle; -+#endif -+ -+ platform_info = (struct coldfire_spi_master *)dev->platform_data; -+ -+ master = spi_alloc_master(dev, sizeof(struct driver_data)); -+ if (!master) -+ return -ENOMEM; -+ -+ drv_data = spi_master_get_devdata(master); -+ drv_data->master = master; -+ -+ INIT_LIST_HEAD(&drv_data->queue); -+ spin_lock_init(&drv_data->lock); -+ -+ master->bus_num = platform_info->bus_num; -+ master->num_chipselect = platform_info->num_chipselect; -+ master->cleanup = cleanup; -+ master->setup = setup; -+ master->transfer = transfer; -+ -+ drv_data->cs_control = platform_info->cs_control; -+ if (drv_data->cs_control) -+ for (i = 0; i < master->num_chipselect; i++) -+ drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP); -+ -+ /* Setup register addresses */ -+ memory_resource = platform_get_resource_byname(pdev, -+ IORESOURCE_MEM, "spi-module"); -+ if (!memory_resource) { -+ dev_dbg(dev, "can not find platform module memory\n"); -+ goto out_error_master_alloc; -+ } -+ -+#if defined(SPI_DSPI_EDMA) -+ drv_data->edma_tx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \ -+ &dma_handle, GFP_DMA); -+ if (!drv_data->edma_tx_buf) { -+ dev_dbg(dev, "cannot allocate eDMA TX memory\n"); -+ goto out_error_master_alloc; -+ } -+ drv_data->edma_rx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \ -+ &dma_handle, GFP_DMA); -+ if (!drv_data->edma_rx_buf) { -+ dma_free_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \ -+ drv_data->edma_tx_buf, dma_handle); -+ kfree(drv_data->edma_tx_buf); -+ dev_dbg(dev, "cannot allocate eDMA RX memory\n"); -+ goto out_error_master_alloc; -+ } -+#endif -+ -+ drv_data->mcr = (void *)&MCF_DSPI_DMCR; -+ drv_data->ctar = (void *)&MCF_DSPI_DCTAR0; -+ drv_data->dspi_sr = (void *)&MCF_DSPI_DSR; -+ drv_data->dspi_rser = (void *)&MCF_DSPI_DRSER; -+ drv_data->dspi_dtfr = (void *)&MCF_DSPI_DTFR; -+ drv_data->dspi_drfr = (void *)&MCF_DSPI_DRFR; -+ -+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "spi-par"); -+ if (!memory_resource) { -+ dev_dbg(dev, "No spi-par memory\n"); -+ goto out_error_master_alloc; -+ } -+ drv_data->par = (void *)memory_resource->start; -+ -+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "spi-int-level"); -+ if (!memory_resource) { -+ dev_dbg(dev, "No spi-int-level memory\n"); -+ goto out_error_master_alloc; -+ } -+ drv_data->int_icr = (void *)memory_resource->start; -+ -+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "spi-int-mask"); -+ if (!memory_resource) { -+ dev_dbg(dev, "No spi-int-mask memory\n"); -+ goto out_error_master_alloc; -+ } -+ drv_data->int_mr = (void *)memory_resource->start; -+ -+ if (platform_info->irq_list) { -+ /* multiple IRQs */ -+ int *irqlist = platform_info->irq_list; -+ while ((irq = *irqlist++)) { -+ int off = *irqlist++; -+ int lvl = *irqlist++; -+ int msk = *irqlist++; -+ status = request_irq(irq, dspi_interrupt, IRQF_DISABLED, -+ dev->bus_id, drv_data); -+ if (status < 0) { -+ dev_err(&pdev->dev, -+ "Unable to attach ColdFire DSPI interrupt\n"); -+ goto out_error_master_alloc; -+ } -+ -+ if (lvl) -+ *(drv_data->int_icr + off) = lvl; -+ -+ if (msk) -+ *drv_data->int_mr &= ~msk; -+ } -+ } -+ else { -+ irq = platform_info->irq_vector; -+ -+ status = request_irq(platform_info->irq_vector, dspi_interrupt, -+ IRQF_DISABLED, dev->bus_id, drv_data); -+ if (status < 0) { -+ dev_err(&pdev->dev, "Unable to attach ColdFire DSPI interrupt\n"); -+ goto out_error_master_alloc; -+ } -+ -+ *drv_data->int_icr = platform_info->irq_lp; -+ *drv_data->int_mr &= ~platform_info->irq_mask; -+ } -+ -+ /* Now that we have all the addresses etc. Let's set it up */ -+ if (platform_info->par_val) -+ *drv_data->par = platform_info->par_val; -+ -+ /* Initial and start queue */ -+ status = init_queue(drv_data); -+ if (status != 0) { -+ dev_err(&pdev->dev, "Problem initializing DSPI queue\n"); -+ goto out_error_irq_alloc; -+ } -+ status = start_queue(drv_data); -+ if (status != 0) { -+ dev_err(&pdev->dev, "Problem starting DSPI queue\n"); -+ goto out_error_irq_alloc; -+ } -+ -+ /* Register with the SPI framework */ -+ platform_set_drvdata(pdev, drv_data); -+ status = spi_register_master(master); -+ if (status != 0) { -+ dev_err(&pdev->dev, "Problem registering DSPI master\n"); -+ status = -EINVAL; -+ goto out_error_queue_alloc; -+ } -+ -+#if defined(SPI_DSPI_EDMA) -+ if (mcf_edma_request_channel(DSPI_DMA_TX_TCD, -+ edma_tx_handler, -+ NULL, -+ 0x0, -+ pdev, -+ NULL, /* spinlock */ -+ DRIVER_NAME) < 0){ -+ dev_err(&pdev->dev, "eDMA transmit channel request\n"); -+ status = -EINVAL; -+ goto out_error_queue_alloc; -+ } -+ -+ if (mcf_edma_request_channel(DSPI_DMA_RX_TCD, -+ edma_rx_handler, -+ NULL, -+ 0x0, -+ pdev, -+ NULL, /* spinlock */ -+ DRIVER_NAME) < 0){ -+ dev_err(&pdev->dev, "eDAM receive channel request\n"); -+ status = -EINVAL; -+ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev); -+ goto out_error_queue_alloc; -+ } -+#endif -+ -+ printk(KERN_INFO "DSPI: Coldfire master initialized\n"); -+ return status; -+ -+out_error_queue_alloc: -+ destroy_queue(drv_data); -+ -+out_error_irq_alloc: -+ free_irq(platform_info->irq_vector, drv_data); -+ -+out_error_master_alloc: -+ spi_master_put(master); -+ return status; -+ -+} -+ -+static int coldfire_spi_remove(struct platform_device *pdev) -+{ -+ struct driver_data *drv_data = platform_get_drvdata(pdev); -+ int irq; -+ int status = 0; -+ -+ if (!drv_data) -+ return 0; -+ -+#if defined(SPI_DSPI_EDMA) -+ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev); -+ mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev); -+#endif -+ -+ /* Remove the queue */ -+ status = destroy_queue(drv_data); -+ if (status != 0) -+ return status; -+ -+ /* Release IRQ */ -+ irq = platform_get_irq(pdev, 0); -+ if (irq >= 0) -+ free_irq(irq, drv_data); -+ -+ /* Disconnect from the SPI framework */ -+ spi_unregister_master(drv_data->master); -+ -+ /* Prevent double remove */ -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+ -+static void coldfire_spi_shutdown(struct platform_device *pdev) -+{ -+ int status = coldfire_spi_remove(pdev); -+ -+ if (status != 0) -+ dev_err(&pdev->dev, "shutdown failed with %d\n", status); -+} -+ -+ -+#ifdef CONFIG_PM -+static int suspend_devices(struct device *dev, void *pm_message) -+{ -+ pm_message_t *state = pm_message; -+ -+ if (dev->power.power_state.event != state->event) { -+ dev_warn(dev, "pm state does not match request\n"); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+static int coldfire_spi_suspend(struct platform_device *pdev, -+ pm_message_t state) -+{ -+ struct driver_data *drv_data = platform_get_drvdata(pdev); -+ int status = 0; -+ -+ /* Check all childern for current power state */ -+ if (device_for_each_child(&pdev->dev, -+ &state, suspend_devices) != 0) { -+ dev_warn(&pdev->dev, "suspend aborted\n"); -+ return -1; -+ } -+ -+ status = stop_queue(drv_data); -+ if (status != 0) -+ return status; -+ -+ return 0; -+} -+ -+static int coldfire_spi_resume(struct platform_device *pdev) -+{ -+ struct driver_data *drv_data = platform_get_drvdata(pdev); -+ int status = 0; -+ -+ /* Start the queue running */ -+ status = start_queue(drv_data); -+ if (status != 0) { -+ dev_err(&pdev->dev, "problem starting queue (%d)\n", status); -+ return status; -+ } -+ -+ return 0; -+} -+#else -+#define coldfire_spi_suspend NULL -+#define coldfire_spi_resume NULL -+#endif /* CONFIG_PM */ -+ -+static struct platform_driver driver = { -+ .driver = { -+ .name = "spi_coldfire", -+ .bus = &platform_bus_type, -+ .owner = THIS_MODULE, -+ }, -+ .probe = coldfire_spi_probe, -+ .remove = __devexit_p(coldfire_spi_remove), -+ .shutdown = coldfire_spi_shutdown, -+ .suspend = coldfire_spi_suspend, -+ .resume = coldfire_spi_resume, -+}; -+ -+static int __init coldfire_spi_init(void) -+{ -+ platform_driver_register(&driver); -+ -+ return 0; -+} -+module_init(coldfire_spi_init); -+ -+static void __exit coldfire_spi_exit(void) -+{ -+ platform_driver_unregister(&driver); -+} -+module_exit(coldfire_spi_exit); -+ -+MODULE_AUTHOR("Matt Waddel"); -+MODULE_DESCRIPTION("ColdFire DSPI Contoller"); -+MODULE_LICENSE("GPL"); ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -35,6 +35,15 @@ config SPI_DEBUG - Say "yes" to enable debug messaging (like dev_dbg and pr_debug), - sysfs, and debugfs support in SPI controller and protocol drivers. - -+config COLDFIRE_EDMA -+ tristate "Coldfire eDMA" -+ depends on COLDFIRE && EXPERIMENTAL -+ help -+ Support for Coldfire eDMA controller. Required for example -+ by SSI audio device driver. -+ -+ -+ - # - # MASTER side ... talking to discrete SPI slave chips including microcontrollers - # -@@ -113,6 +122,27 @@ config SPI_GPIO - - If unsure, say N. - -+config SPI_COLDFIRE -+ tristate "Coldfire QSPI/DSPI SPI Master" -+ depends on SPI_MASTER && COLDFIRE && EXPERIMENTAL -+ help -+ SPI driver for Freescale Coldfire QSPI module in master mode. -+ Tested with the 5282 processor, but should also work with other -+ Coldfire variants. -+ -+config SPI_DSPI -+ tristate "Coldfire DSPI" -+ depends on SPI_MASTER && COLDFIRE -+ help -+ SPI driver for Coldfire DSPI driver only. -+ -+config SPI_COLDFIRE_DSPI_EDMA -+ boolean "Coldfire DSPI master driver uses eDMA" -+ depends on SPI_MASTER && COLDFIRE && SPI_COLDFIRE && EXPERIMENTAL && COLDFIRE_EDMA -+ default n -+ help -+ Say "yes" if you want DSPI master driver to use eDMA for transfers. -+ - config SPI_IMX - tristate "Freescale iMX SPI controller" - depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL -@@ -255,6 +285,18 @@ config SPI_TLE62X0 - # - # Add new SPI protocol masters in alphabetical order above this line - # -+config SPI_COLDFIRE_SSI_AUDIO -+ tristate "Coldfire SSI AUDIO" -+ depends on SPI_MASTER && SPI_COLDFIRE && EXPERIMENTAL -+ help -+ SSI audio device driver -+ -+config SSIAUDIO_USE_EDMA -+ boolean "Coldfire DSPI master driver uses eDMA" -+ default y -+ depends on EXPERIMENTAL && COLDFIRE_EDMA && SPI_COLDFIRE_SSI_AUDIO -+ help -+ Say "yes" if you want SSI audio driver to use eDMA for SSI transfers. - - # (slave support would go here) - ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -6,6 +6,8 @@ ifeq ($(CONFIG_SPI_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG - endif - -+obj-$(CONFIG_COLDFIRE_EDMA) += coldfire_edma.o -+ - # small core, mostly translating board-specific - # config declarations into driver model code - obj-$(CONFIG_SPI_MASTER) += spi.o -@@ -16,6 +18,8 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx. - obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o - obj-$(CONFIG_SPI_AU1550) += au1550_spi.o - obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o -+# obj-$(CONFIG_SPI_COLDFIRE) += spi_coldfire.o spi-m5445x.o -+obj-$(CONFIG_SPI_DSPI) += dspi_mcf.o - obj-$(CONFIG_SPI_GPIO) += spi_gpio.o - obj-$(CONFIG_SPI_IMX) += spi_imx.o - obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o -@@ -35,6 +39,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. - obj-$(CONFIG_SPI_AT25) += at25.o - obj-$(CONFIG_SPI_SPIDEV) += spidev.o - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o -+obj-$(CONFIG_SPI_COLDFIRE_SSI_AUDIO) += ssi_audio.o - # ... add above this line ... - - # SPI slave controller drivers (upstream link) ---- /dev/null -+++ b/drivers/spi/spi_coldfire.c -@@ -0,0 +1,1542 @@ -+/* -+ * spi_coldfire.c - Master QSPI/DSPI controller for the ColdFire processors -+ * -+ * -+ * (C) Copyright 2005, Intec Automation, -+ * Mike Lavender (mike@steroidmicros) -+ * -+ * (C) Copyright 2007-2008, Freescale Inc, -+ * Yaroslav Vinogradov -+ * Andrey Butok -+ * Kurt Mahan -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.003 12 February 2008 Andrey Butok, Freescale Semiconductor -+ * Added suport of MCF5227x DSPI module. -+ * v0.002 2007 Yaroslav Vinogradov, Freescale Semiconductor -+ * Added suport of MCF5445x DSPI module. -+ * v0.001 2005 Mike Lavender, Intec Automation, -+ * Intial version. Coldfire QSPI master driver. -+ * -+ */ -+ -+ -+/****************************************************************************/ -+ -+/* -+ * Includes -+ */ -+ -+#include <linux/autoconf.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/device.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+#include <linux/workqueue.h> -+#include <linux/delay.h> -+ -+#include <asm/delay.h> -+#include <asm/mcfsim.h> -+#include <asm/mcfqspi.h> -+#include <asm/coldfire.h> -+ -+#if defined(CONFIG_M5445X) -+ #include <asm/virtconvert.h> -+ -+ #define SPI_DSPI -+ #if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA) -+ #define SPI_DSPI_EDMA -+ #ifdef CONFIG_MMU -+ #define SPI_USE_MMU -+ #endif -+ #include <asm/mcf5445x_edma.h> -+ #endif -+ -+ #include <asm/mcf5445x_dspi.h> -+#endif -+ -+#if defined(CONFIG_M547X_8X) -+ #define SPI_DSPI -+ -+ #include <asm/virtconvert.h> -+ #include <asm/m5485dspi.h> -+#endif -+ -+#ifdef CONFIG_M5227x -+ #define SPI_DSPI -+ -+ #if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA) -+ #define SPI_DSPI_EDMA -+ #endif -+#endif -+ -+ -+#if defined(SPI_DSPI_EDMA) -+ -+/* edma buffer size in transfer units (32bits) */ -+#define EDMA_BUFFER_SIZE (PAGE_SIZE/4) -+#define EDMA_BUFSIZE_KMALLOC (EDMA_BUFFER_SIZE*4) -+ -+#define DSPI_DMA_RX_TCD MCF_EDMA_CHAN_DSPI_RX -+#define DSPI_DMA_TX_TCD MCF_EDMA_CHAN_DSPI_TX -+ -+#include <asm/mcf_edma.h> -+#endif -+ -+MODULE_AUTHOR("Mike Lavender"); -+MODULE_DESCRIPTION("ColdFire SPI Contoller"); -+MODULE_LICENSE("GPL"); -+ -+#define DRIVER_NAME "Coldfire QSPI/DSPI" -+ -+/****************************************************************************/ -+ -+/* -+ * Local constants and macros -+ */ -+ -+#define QSPI_RAM_SIZE 0x10 /* 16 word table */ -+#define QSPI_TRANSMIT_RAM 0x00 -+#define QSPI_RECEIVE_RAM 0x10 -+#define QSPI_COMMAND_RAM 0x20 -+ -+#define QSPI_COMMAND 0x7000 /* 15: X = Continuous CS -+ * 14: 1 = Get BITSE from QMR[BITS] -+ * 13: 1 = Get DT from QDLYR[DTL] -+ * 12: 1 = Get DSK from QDLYR[QCD] -+ * 8-11: XXXX = next 4 bytes for CS -+ * 0-7: 0000 0000 Reserved -+ */ -+ -+#define QIR_WCEF 0x0008 /* write collison */ -+#define QIR_ABRT 0x0004 /* abort */ -+#define QIR_SPIF 0x0001 /* finished */ -+ -+#define QIR_WCEFE 0x0800 -+#define QIR_ABRTE 0x0400 -+#define QIR_SPIFE 0x0100 -+ -+#define QIR_WCEFB 0x8000 -+#define QIR_ABRTB 0x4000 -+#define QIR_ABRTL 0x1000 -+ -+#define QMR_BITS 0x3C00 -+#define QMR_BITS_8 0x2000 -+ -+#define QCR_CONT 0x8000 -+ -+#define QDLYR_SPE 0x8000 -+ -+#define QWR_ENDQP_MASK 0x0F00 -+#define QWR_CSIV 0x1000 /* 1 = active low chip selects */ -+ -+ -+#define START_STATE ((void*)0) -+#define RUNNING_STATE ((void*)1) -+#define DONE_STATE ((void*)2) -+#define ERROR_STATE ((void*)-1) -+ -+#define QUEUE_RUNNING 0 -+#define QUEUE_STOPPED 1 -+ -+/****************************************************************************/ -+ -+/* -+ * Local Data Structures -+ */ -+ -+struct transfer_state { -+ u32 index; -+ u32 len; -+ void *tx; -+ void *tx_end; -+ void *rx; -+ void *rx_end; -+ char flags; -+#define TRAN_STATE_RX_VOID 0x01 -+#define TRAN_STATE_TX_VOID 0x02 -+#define TRAN_STATE_WORD_ODD_NUM 0x04 -+ u8 cs; -+ u16 void_write_data; -+ unsigned cs_change:1; -+}; -+ -+typedef struct { -+ unsigned master:1; -+ unsigned dohie:1; -+ unsigned bits:4; -+ unsigned cpol:1; -+ unsigned cpha:1; -+ unsigned baud:8; -+} QMR; -+ -+typedef struct { -+ unsigned spe:1; -+ unsigned qcd:7; -+ unsigned dtl:8; -+} QDLYR; -+ -+typedef struct { -+ unsigned halt:1; -+ unsigned wren:1; -+ unsigned wrto:1; -+ unsigned csiv:1; -+ unsigned endqp:4; -+ unsigned cptqp:4; -+ unsigned newqp:4; -+} QWR; -+ -+ -+typedef struct { -+ unsigned master:1; -+ unsigned cont_scke:1; -+ unsigned dconf:2; -+ unsigned frz:1; -+ unsigned mtfe:1; -+ unsigned pcsse:1; -+ unsigned rooe:1; -+ unsigned pcsis:8; -+ unsigned reserved15:1; -+ unsigned mdis:1; -+ unsigned dis_tx:1; -+ unsigned dis_rxf:1; -+ unsigned clr_tx:1; -+ unsigned clr_rxf:1; -+ unsigned smpl_pt:2; -+ unsigned reserved71:7; -+ unsigned halt:1; -+} DSPI_MCR; -+ -+typedef struct { -+ unsigned dbr:1; -+ unsigned fmsz:4; -+ unsigned cpol:1; -+ unsigned cpha:1; -+ unsigned lsbfe:1; -+ unsigned pcssck:2; -+ unsigned pasc:2; -+ unsigned pdt:2; -+ unsigned pbr:2; -+ unsigned cssck:4; -+ unsigned asc:4; -+ unsigned dt:4; -+ unsigned br:4; -+} DSPI_CTAR; -+ -+struct chip_data { -+#if defined(SPI_DSPI) -+ /* dspi data */ -+ union { -+ u32 mcr_val; -+ DSPI_MCR mcr; -+ }; -+ union { -+ u32 ctar_val; -+ DSPI_CTAR ctar; -+ }; -+#else -+ union { -+ u16 qmr_val; -+ QMR qmr; -+ }; -+ union { -+ u16 qdlyr_val; -+ QDLYR qdlyr; -+ }; -+ union { -+ u16 qwr_val; -+ QWR qwr; -+ }; -+#endif -+ -+ u16 void_write_data; -+}; -+ -+ -+struct driver_data { -+ /* Driver model hookup */ -+ struct platform_device *pdev; -+ -+ /* SPI framework hookup */ -+ struct spi_master *master; -+ -+ /* Driver message queue */ -+ struct workqueue_struct *workqueue; -+ struct work_struct pump_messages; -+ spinlock_t lock; -+ struct list_head queue; -+ int busy; -+ int run; -+ -+ /* Message Transfer pump */ -+ struct tasklet_struct pump_transfers; -+ -+ /* Current message transfer state info */ -+ struct spi_message* cur_msg; -+ struct spi_transfer* cur_transfer; -+ struct chip_data *cur_chip; -+ size_t len; -+ void *tx; -+ void *tx_end; -+ void *rx; -+ void *rx_end; -+ char flags; -+#define TRAN_STATE_RX_VOID 0x01 -+#define TRAN_STATE_TX_VOID 0x02 -+#define TRAN_STATE_WORD_ODD_NUM 0x04 -+ u8 cs; -+ u16 void_write_data; -+ unsigned cs_change:1; -+ -+ u32 trans_cnt; -+ u32 wce_cnt; -+ u32 abrt_cnt; -+#if defined(SPI_DSPI) -+ u32 *mcr; /* DSPI MCR register */ -+ u32 *ctar; /* DSPI CTAR register */ -+ u32 *dspi_dtfr; /* DSPI DTFR register */ -+ u32 *dspi_drfr; /* DSPI DRFR register */ -+ u32 *dspi_rser; /* DSPI RSER register */ -+ u32 *dspi_sr; /* DSPI status register */ -+ u8 dspi_ctas; /* DSPI CTAS value*/ -+#if defined(SPI_DSPI_EDMA) -+ void* edma_tx_buf; -+ void* edma_rx_buf; -+#endif -+#else -+ u16 *qmr; /* QSPI mode register */ -+ u16 *qdlyr; /* QSPI delay register */ -+ u16 *qwr; /* QSPI wrap register */ -+ u16 *qir; /* QSPI interrupt register */ -+ u16 *qar; /* QSPI address register */ -+ u16 *qdr; /* QSPI data register */ -+ u16 *qcr; /* QSPI command register */ -+#endif -+#if defined(CONFIG_M532x) || defined(CONFIG_M537x) -+ u16 *par; /* Pin assignment register */ -+#else -+ u8 *par; /* Pin assignment register */ -+#endif -+ u8 *int_icr; /* Interrupt level and priority register */ -+ u32 *int_mr; /* Interrupt mask register */ -+ void (*cs_control)(u8 cs, u8 command); -+}; -+ -+#define DSPI_CS(cs) ((1<<(cs))<<16) -+ -+ -+/****************************************************************************/ -+ -+/* -+ * SPI local functions -+ */ -+ -+static void *next_transfer(struct driver_data *drv_data) -+{ -+ struct spi_message *msg = drv_data->cur_msg; -+ struct spi_transfer *trans = drv_data->cur_transfer; -+ -+ /* Move to next transfer */ -+ if (trans->transfer_list.next != &msg->transfers) { -+ drv_data->cur_transfer = -+ list_entry(trans->transfer_list.next, -+ struct spi_transfer, -+ transfer_list); -+ return RUNNING_STATE; -+ } else -+ return DONE_STATE; -+} -+ -+ -+#define DSPI_BITS MCF_DSPI_DCTAR_FMSZ(15) -+#define DSPI_BITS_16 MCF_DSPI_DCTAR_FMSZ(15) -+#define DSPI_BITS_8 MCF_DSPI_DCTAR_FMSZ(7) -+#define DSPI_FIFO_SIZE 16 -+ -+static inline int is_word_transfer(struct driver_data *drv_data) -+{ -+#if defined(SPI_DSPI) -+ return ((*drv_data->ctar & DSPI_BITS_16) == DSPI_BITS_8) ? 0 : 1; -+#else -+ return ((*drv_data->qmr & QMR_BITS) == QMR_BITS_8) ? 0 : 1; -+#endif -+} -+ -+static void inline set_8bit_transfer_mode(struct driver_data *drv_data) -+{ -+#if defined(SPI_DSPI) -+ *drv_data->ctar |= (*drv_data->ctar & ~DSPI_BITS) | DSPI_BITS_8; -+#else -+ *drv_data->qmr |= (*drv_data->qmr & ~QMR_BITS) | QMR_BITS_8; -+#endif -+} -+ -+static void inline set_16bit_transfer_mode(struct driver_data *drv_data) -+{ -+#if defined(SPI_DSPI) -+ *drv_data->ctar |= (*drv_data->ctar & ~DSPI_BITS) | DSPI_BITS_16; -+#else -+ *drv_data->qmr |= (*drv_data->qmr & ~QMR_BITS); -+#endif -+} -+ -+static int write(struct driver_data *drv_data) -+{ -+ int tx_count = 0; -+#ifndef SPI_DSPI -+ int cmd_count = 0; -+#endif -+ int tx_word; -+ -+#if defined(SPI_DSPI) -+#if defined(SPI_DSPI_EDMA) -+ u32* edma_wr; -+#endif -+ u16 d16; -+ u8 d8; -+ u32 dspi_pushr; -+ int first = 1; -+#endif -+ -+ tx_word = is_word_transfer(drv_data); -+ -+ /* If we are in word mode, but only have a single byte to transfer -+ * then switch to byte mode temporarily. Will switch back at the -+ * end of the transfer. */ -+ if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) { -+ drv_data->flags |= TRAN_STATE_WORD_ODD_NUM; -+ set_8bit_transfer_mode(drv_data); -+ tx_word = 0; -+ } -+ -+ -+#if defined(SPI_DSPI) -+#if defined(SPI_DSPI_EDMA) -+ edma_wr = (u32*)(drv_data->edma_tx_buf); -+#endif -+ -+#if defined(SPI_DSPI_EDMA) -+ while ((drv_data->tx < drv_data->tx_end) && (tx_count < EDMA_BUFFER_SIZE)) { -+#else -+ while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) { -+#endif -+ if (tx_word) { -+ if ((drv_data->tx_end - drv_data->tx) == 1) -+ break; -+ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) { -+ d16 = *(u16 *)drv_data->tx; -+ } else { -+ d16 = drv_data->void_write_data; -+ } -+ -+ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) -+ | DSPI_CS(drv_data->cs) -+ | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas); -+ drv_data->tx += 2; -+ -+#if defined(SPI_DSPI_EDMA) -+ if (drv_data->tx == drv_data->tx_end || tx_count==EDMA_BUFFER_SIZE-1) { -+#else -+ if (drv_data->tx == drv_data->tx_end || tx_count==DSPI_FIFO_SIZE-1) { -+#endif -+ /* last transfer in the queue */ -+ dspi_pushr |= MCF_DSPI_DTFR_EOQ; -+ if (drv_data->cs_change) { -+ dspi_pushr &= ~MCF_DSPI_DTFR_CONT; -+ } -+ } -+ -+ if (first) { -+ first = 0; -+ dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */ -+ } -+#if defined(SPI_DSPI_EDMA) -+ *edma_wr = dspi_pushr; -+ edma_wr++; -+#else -+ *drv_data->dspi_dtfr = dspi_pushr; -+#endif -+ -+ -+ } else { -+ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) { -+ d8 = *(u8 *)drv_data->tx; -+ } else { -+ d8 = *(u8 *)&drv_data->void_write_data; -+ } -+ -+ dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) -+ | DSPI_CS(drv_data->cs) -+ | MCF_DSPI_DTFR_CTAS(drv_data->dspi_ctas) -+ | MCF_DSPI_DTFR_CONT; -+ -+ drv_data->tx++; -+ -+ if (drv_data->tx == drv_data->tx_end || tx_count==DSPI_FIFO_SIZE-1) { -+ /* last transfer in the queue */ -+ dspi_pushr |= MCF_DSPI_DTFR_EOQ; -+ if (drv_data->cs_change) { -+ dspi_pushr &= ~MCF_DSPI_DTFR_CONT; -+ } -+ } -+ -+ if (first) { -+ first = 0; -+ dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */ -+ } -+ -+#if defined(SPI_DSPI_EDMA) -+ *edma_wr = dspi_pushr; -+ edma_wr++; -+#else -+ *drv_data->dspi_dtfr = dspi_pushr; -+#endif -+ -+ } -+ tx_count++; -+ } -+ -+#if defined(SPI_DSPI_EDMA) -+ -+ if (tx_count>0) { -+ -+ /* TBD: initiate eDMA transfer */ -+ mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD, -+#ifdef SPI_USE_MMU -+ virt_to_phys(drv_data->edma_tx_buf), -+#else -+ drv_data->edma_tx_buf, -+#endif -+ (u32)drv_data->dspi_dtfr, -+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, -+ 4, /* soff */ -+ 4, /* nbytes */ -+ 0, /* slast */ -+ tx_count, /* citer */ -+ tx_count, /* biter */ -+ 0, /* doff */ -+ 0, /* dlastsga */ -+ 0, /* major_int */ -+ 1 /* disable_req */ -+ ); -+ -+ mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD, -+ (u32)drv_data->dspi_drfr, -+#ifdef SPI_USE_MMU -+ virt_to_phys(drv_data->edma_rx_buf), -+#else -+ drv_data->edma_rx_buf, -+#endif -+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, -+ 0, /* soff */ -+ 4, /* nbytes */ -+ 0, /* slast */ -+ tx_count, /* citer */ -+ tx_count, /* biter */ -+ 4, /* doff */ -+ 0, /* dlastsga */ -+ 0, /* major_int */ -+ 1 /* disable_req */ -+ ); -+ -+ -+ start_edma_transfer(DSPI_DMA_TX_TCD); /* transmit SPI data */ -+ start_edma_transfer(DSPI_DMA_RX_TCD); /* receive SPI data */ -+ } -+#endif -+ -+#else -+ -+ *drv_data->qar = QSPI_TRANSMIT_RAM; -+ while ((drv_data->tx < drv_data->tx_end) && (tx_count < QSPI_RAM_SIZE)) { -+ if (tx_word) { -+ if ((drv_data->tx_end - drv_data->tx) == 1) -+ break; -+ -+ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) -+ *drv_data->qdr = *(u16 *)drv_data->tx; -+ else -+ *drv_data->qdr = drv_data->void_write_data; -+ drv_data->tx += 2; -+ } else { -+ if (!(drv_data->flags & TRAN_STATE_TX_VOID)) -+ *drv_data->qdr = *(u8 *)drv_data->tx; -+ else -+ *drv_data->qdr = *(u8 *)&drv_data->void_write_data; -+ drv_data->tx++; -+ } -+ tx_count++; -+ } -+ -+ -+ *drv_data->qar = QSPI_COMMAND_RAM; -+ while (cmd_count < tx_count) { -+ u16 qcr = QSPI_COMMAND -+ | QCR_CONT -+ | (~((0x01 << drv_data->cs) << 8) & 0x0F00); -+ -+ if ( (cmd_count == tx_count - 1) -+ && (drv_data->tx == drv_data->tx_end) -+ && (drv_data->cs_change) ) { -+ qcr &= ~QCR_CONT; -+ } -+ *drv_data->qcr = qcr; -+ cmd_count++; -+ } -+ -+ *drv_data->qwr = (*drv_data->qwr & ~QWR_ENDQP_MASK) | ((cmd_count - 1) << 8); -+ -+ /* Fire it up! */ -+ *drv_data->qdlyr |= QDLYR_SPE; -+#endif -+ -+ return tx_count; -+} -+ -+ -+static int read(struct driver_data *drv_data) -+{ -+ int rx_count = 0; -+ int rx_word; -+#if defined(SPI_DSPI_EDMA) -+ u32* rx_edma; -+#endif -+ u16 d; -+ rx_word = is_word_transfer(drv_data); -+ -+#if defined(SPI_DSPI) -+#if defined(SPI_DSPI_EDMA) -+ rx_edma = (u32*) drv_data->edma_tx_buf; -+ while ((drv_data->rx < drv_data->rx_end) && (rx_count < EDMA_BUFFER_SIZE)) { -+#else -+ while ((drv_data->rx < drv_data->rx_end) && (rx_count < DSPI_FIFO_SIZE)) { -+#endif -+ if (rx_word) { -+ if ((drv_data->rx_end - drv_data->rx) == 1) -+ break; -+#if defined(SPI_DSPI_EDMA) -+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma); -+ rx_edma++; -+#else -+ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr); -+#endif -+ -+ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) -+ *(u16 *)drv_data->rx = d; -+ drv_data->rx += 2; -+ } else { -+#if defined(SPI_DSPI_EDMA) -+ d = MCF_DSPI_DRFR_RXDATA(*rx_edma); -+ rx_edma++; -+#else -+ d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr); -+#endif -+ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) -+ *(u8 *)drv_data->rx = d; -+ drv_data->rx++; -+ } -+ rx_count++; -+ } -+#else -+ *drv_data->qar = QSPI_RECEIVE_RAM; -+ while ((drv_data->rx < drv_data->rx_end) && (rx_count < QSPI_RAM_SIZE)) { -+ if (rx_word) { -+ if ((drv_data->rx_end - drv_data->rx) == 1) -+ break; -+ -+ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) -+ *(u16 *)drv_data->rx = *drv_data->qdr; -+ drv_data->rx += 2; -+ } else { -+ if (!(drv_data->flags & TRAN_STATE_RX_VOID)) -+ *(u8 *)drv_data->rx = *drv_data->qdr; -+ drv_data->rx++; -+ } -+ rx_count++; -+ } -+#endif -+ -+ return rx_count; -+} -+ -+ -+static inline void qspi_setup_chip(struct driver_data *drv_data) -+{ -+ struct chip_data *chip = drv_data->cur_chip; -+ -+#if defined(SPI_DSPI) -+ -+ *drv_data->mcr = chip->mcr_val; -+ -+ /* TBD: remove later */ -+/* JKM -- validate */ -+ chip->ctar_val = 0x78560118; -+ -+ *drv_data->ctar = chip->ctar_val; -+ *drv_data->dspi_rser = 0 -+ | MCF_DSPI_DRSER_EOQFE -+#if defined(SPI_DSPI_EDMA) -+ | MCF_DSPI_DRSER_TFFFE -+ | MCF_DSPI_DRSER_TFFFS -+#endif -+ ; -+#else -+ *drv_data->qmr = chip->qmr_val; -+ *drv_data->qdlyr = chip->qdlyr_val; -+ *drv_data->qwr = chip->qwr_val; -+ -+ /* -+ * Enable all the interrupts and clear all the flags -+ */ -+ *drv_data->qir = (QIR_SPIFE | QIR_ABRTE | QIR_WCEFE) -+ | (QIR_WCEFB | QIR_ABRTB | QIR_ABRTL) -+ | (QIR_SPIF | QIR_ABRT | QIR_WCEF); -+#endif -+} -+ -+#if defined(SPI_DSPI_EDMA) -+static int edma_tx_handler(int channel, void* dev) -+{ -+ if (channel == DSPI_DMA_TX_TCD) { -+ stop_edma_transfer(DSPI_DMA_TX_TCD); -+ } -+ return IRQ_HANDLED; -+} -+ -+static int edma_rx_handler(int channel, void* dev) -+{ -+ if (channel == DSPI_DMA_RX_TCD) { -+ stop_edma_transfer(DSPI_DMA_RX_TCD); -+ } -+ -+ return IRQ_HANDLED; -+} -+#endif -+ -+static irqreturn_t qspi_interrupt(int irq, void *dev_id) -+{ -+ struct driver_data *drv_data = (struct driver_data *)dev_id; -+ struct spi_message *msg = drv_data->cur_msg; -+#if defined(SPI_DSPI) -+#if !defined(SPI_DSPI_EDMA) -+ u32 irq_status = *drv_data->dspi_sr; -+#endif -+#else -+ u16 irq_status = *drv_data->qir; -+#endif -+ -+ /* Clear all flags immediately */ -+#if defined(SPI_DSPI) -+ *drv_data->dspi_sr = MCF_DSPI_DSR_EOQF; -+#else -+ *drv_data->qir |= (QIR_SPIF | QIR_ABRT | QIR_WCEF); -+#endif -+ -+ if (!drv_data->cur_msg || !drv_data->cur_msg->state) { -+#if !defined(SPI_DSPI_EDMA) -+ /* if eDMA is used it happens some time (at least once)*/ -+ printk(KERN_ERR "coldfire-qspi: bad message or transfer " -+ "state in interrupt handler. IRQ status=%x\n", irq_status); -+#endif -+ return IRQ_NONE; -+ } -+ -+#if !defined(SPI_DSPI) -+ if (irq_status & QIR_SPIF) { -+#endif -+ /* -+ * Read the data into the buffer and reload and start -+ * queue with new data if not finished. If finished -+ * then setup the next transfer -+ */ -+ read(drv_data); -+ -+ if (drv_data->rx == drv_data->rx_end) { -+ /* -+ * Finished now - fall through and schedule next -+ * transfer tasklet -+ */ -+ if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM) { -+ set_16bit_transfer_mode(drv_data); -+ } -+ -+ msg->state = next_transfer(drv_data); -+ msg->actual_length += drv_data->len; -+ } else { -+ /* not finished yet - keep going */ -+ write(drv_data); -+ return IRQ_HANDLED; -+ } -+#if !defined(SPI_DSPI) -+ } else { -+ if (irq_status & QIR_WCEF) -+ drv_data->wce_cnt++; -+ -+ if (irq_status & QIR_ABRT) -+ drv_data->abrt_cnt++; -+ -+ msg->state = ERROR_STATE; -+ } -+#endif -+ -+ tasklet_schedule(&drv_data->pump_transfers); -+ -+ return IRQ_HANDLED; -+} -+ -+/* caller already set message->status; dma and pio irqs are blocked */ -+static void giveback(struct driver_data *drv_data) -+{ -+ struct spi_transfer* last_transfer; -+ unsigned long flags; -+ struct spi_message *msg; -+ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ msg = drv_data->cur_msg; -+ drv_data->cur_msg = NULL; -+ drv_data->cur_transfer = NULL; -+ drv_data->cur_chip = NULL; -+ queue_work(drv_data->workqueue, &drv_data->pump_messages); -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ -+ last_transfer = list_entry(msg->transfers.prev, -+ struct spi_transfer, -+ transfer_list); -+ -+ if (!last_transfer->cs_change) -+ drv_data->cs_control(drv_data->cs, QSPI_CS_DROP); -+ -+ msg->state = NULL; -+ if (msg->complete) -+ msg->complete(msg->context); -+} -+ -+ -+static void pump_transfers(unsigned long data) -+{ -+ struct driver_data *drv_data = (struct driver_data *)data; -+ struct spi_message *message = NULL; -+ struct spi_transfer *transfer = NULL; -+ struct spi_transfer *previous = NULL; -+ struct chip_data *chip = NULL; -+ unsigned long flags; -+ -+ /* Get current state information */ -+ message = drv_data->cur_msg; -+ transfer = drv_data->cur_transfer; -+ chip = drv_data->cur_chip; -+ -+ /* Handle for abort */ -+ if (message->state == ERROR_STATE) { -+ message->status = -EIO; -+ giveback(drv_data); -+ return; -+ } -+ -+ /* Handle end of message */ -+ if (message->state == DONE_STATE) { -+ message->status = 0; -+ giveback(drv_data); -+ return; -+ } -+ -+ if (message->state == START_STATE) { -+ qspi_setup_chip(drv_data); -+ -+ if (drv_data->cs_control) -+ drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT); -+ } -+ -+ /* Delay if requested at end of transfer*/ -+ if (message->state == RUNNING_STATE) { -+ previous = list_entry(transfer->transfer_list.prev, -+ struct spi_transfer, -+ transfer_list); -+ -+ if (drv_data->cs_control && transfer->cs_change) -+ drv_data->cs_control(message->spi->chip_select, QSPI_CS_DROP); -+ -+ if (previous->delay_usecs) -+ udelay(previous->delay_usecs); -+ -+ if (drv_data->cs_control && transfer->cs_change) -+ drv_data->cs_control(message->spi->chip_select, QSPI_CS_ASSERT); -+ } -+ -+ drv_data->flags = 0; -+ drv_data->tx = (void *)transfer->tx_buf; -+ drv_data->tx_end = drv_data->tx + transfer->len; -+ drv_data->rx = transfer->rx_buf; -+ drv_data->rx_end = drv_data->rx + transfer->len; -+ drv_data->len = transfer->len; -+ if (!drv_data->rx) -+ drv_data->flags |= TRAN_STATE_RX_VOID; -+ if (!drv_data->tx) -+ drv_data->flags |= TRAN_STATE_TX_VOID; -+ drv_data->cs = message->spi->chip_select; -+ drv_data->cs_change = transfer->cs_change; -+ drv_data->void_write_data = chip->void_write_data; -+ -+ message->state = RUNNING_STATE; -+ -+ /* Go baby, go */ -+ local_irq_save(flags); -+ write(drv_data); -+ local_irq_restore(flags); -+} -+ -+ -+static void pump_messages(struct work_struct *work) -+{ -+ struct driver_data *drv_data; -+ unsigned long flags; -+ -+ drv_data = container_of(work, struct driver_data, pump_messages); -+ -+ /* Lock queue and check for queue work */ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { -+ drv_data->busy = 0; -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ return; -+ } -+ -+ /* Make sure we are not already running a message */ -+ if (drv_data->cur_msg) { -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ return; -+ } -+ -+ /* Extract head of queue */ -+ drv_data->cur_msg = list_entry(drv_data->queue.next, -+ struct spi_message, queue); -+ list_del_init(&drv_data->cur_msg->queue); -+ -+ /* Initial message state*/ -+ drv_data->cur_msg->state = START_STATE; -+ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, -+ struct spi_transfer, -+ transfer_list); -+ -+ /* Setup the SPI Registers using the per chip configuration */ -+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); -+ -+ /* Mark as busy and launch transfers */ -+ tasklet_schedule(&drv_data->pump_transfers); -+ -+ drv_data->busy = 1; -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+} -+ -+/****************************************************************************/ -+ -+/* -+ * SPI master implementation -+ */ -+ -+static int transfer(struct spi_device *spi, struct spi_message *msg) -+{ -+ struct driver_data *drv_data = spi_master_get_devdata(spi->master); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ -+ if (drv_data->run == QUEUE_STOPPED) { -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ return -ESHUTDOWN; -+ } -+ -+ msg->actual_length = 0; -+ msg->status = -EINPROGRESS; -+ msg->state = START_STATE; -+ -+ list_add_tail(&msg->queue, &drv_data->queue); -+ -+ if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) -+ queue_work(drv_data->workqueue, &drv_data->pump_messages); -+ -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ -+ return 0; -+} -+ -+ -+static int setup(struct spi_device *spi) -+{ -+ struct coldfire_spi_chip *chip_info; -+ struct chip_data *chip; -+#ifndef SPI_DSPI -+ u32 baud_divisor = 255; -+#endif -+ -+ chip_info = (struct coldfire_spi_chip *)spi->controller_data; -+ -+ /* Only alloc on first setup */ -+ chip = spi_get_ctldata(spi); -+ if (chip == NULL) { -+ chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL); -+ if (!chip) -+ return -ENOMEM; -+ spi->mode = chip_info->mode; -+ spi->bits_per_word = chip_info->bits_per_word; -+ } -+ -+#if defined(SPI_DSPI) -+ chip->mcr.master = 1; -+ chip->mcr.cont_scke = 0; -+ chip->mcr.dconf = 0; -+ chip->mcr.frz = 0; -+ chip->mcr.mtfe = 0; -+ chip->mcr.pcsse = 0; -+ chip->mcr.rooe = 0; -+ chip->mcr.pcsis = 0xFF; -+ chip->mcr.reserved15 = 0; -+ chip->mcr.mdis = 0; -+ chip->mcr.dis_tx = 0; -+ chip->mcr.dis_rxf = 0; -+ chip->mcr.clr_tx = 1; -+ chip->mcr.clr_rxf = 1; -+ chip->mcr.smpl_pt = 0; -+ chip->mcr.reserved71 = 0; -+ chip->mcr.halt = 0; -+ -+ if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) { -+ chip->ctar.fmsz = spi->bits_per_word-1; -+ } else { -+ printk(KERN_ERR "coldfire-spi: invalid wordsize\n"); -+ kfree(chip); -+ return -ENODEV; -+ } -+ -+ if (spi->mode & SPI_CPHA) -+ chip->ctar.cpha = 1; -+ else -+ chip->ctar.cpha = 0; -+ -+ if (spi->mode & SPI_CPOL) -+ chip->ctar.cpol = 1; -+ else -+ chip->ctar.cpol = 0; -+ -+ if (spi->mode & SPI_LSB_FIRST) -+ chip->ctar.lsbfe = 1; -+ else -+ chip->ctar.lsbfe = 0; -+ -+ /* This values are default for audio device */ -+ chip->ctar.dbr = 0; -+ chip->ctar.pbr = 2; -+ chip->ctar.br = 8; -+ -+ /* This values are default for audio device */ -+ chip->ctar.pcssck = 1; -+ chip->ctar.pasc = 1; -+ chip->ctar.pdt = 1; -+ chip->ctar.cssck = 0; -+ chip->ctar.asc = 1; -+ chip->ctar.dt = 1; -+ -+ chip->void_write_data = chip_info->void_write_data; -+ -+#else -+ -+ chip->qwr.csiv = 1; /* Chip selects are active low */ -+ chip->qmr.master = 1; /* Must set to master mode */ -+ chip->qmr.dohie = 1; /* Data output high impediance enabled */ -+ chip->void_write_data = chip_info->void_write_data; -+ -+ chip->qdlyr.qcd = chip_info->del_cs_to_clk; -+ chip->qdlyr.dtl = chip_info->del_after_trans; -+ -+ if (spi->max_speed_hz != 0) -+ baud_divisor = (MCF_CLK/(2*spi->max_speed_hz)); -+ -+ if (baud_divisor < 2) -+ baud_divisor = 2; -+ -+ if (baud_divisor > 255) -+ baud_divisor = 255; -+ -+ chip->qmr.baud = baud_divisor; -+ -+ /*printk( "SPI: spi->max_speed_hz %d\n", spi->max_speed_hz );*/ -+ /*printk( "SPI: Baud set to %d\n", chip->qmr.baud );*/ -+ -+ if (spi->mode & SPI_CPHA) -+ chip->qmr.cpha = 1; -+ -+ if (spi->mode & SPI_CPOL) -+ chip->qmr.cpol = 1; -+ -+ if (spi->bits_per_word == 16) { -+ chip->qmr.bits = 0; -+ } else if ((spi->bits_per_word >= 8) && (spi->bits_per_word <= 15)) { -+ chip->qmr.bits = spi->bits_per_word; -+ } else { -+ printk(KERN_ERR "coldfire-spi: invalid wordsize\n"); -+ kfree(chip); -+ return -ENODEV; -+ } -+ -+#endif -+ -+ spi_set_ctldata(spi, chip); -+ -+ return 0; -+} -+ -+static int init_queue(struct driver_data *drv_data) -+{ -+ INIT_LIST_HEAD(&drv_data->queue); -+ spin_lock_init(&drv_data->lock); -+ -+ drv_data->run = QUEUE_STOPPED; -+ drv_data->busy = 0; -+ -+ tasklet_init(&drv_data->pump_transfers, -+ pump_transfers, (unsigned long)drv_data); -+ -+ INIT_WORK(&drv_data->pump_messages, pump_messages); -+ -+ drv_data->workqueue = create_singlethread_workqueue( -+ drv_data->master->dev.parent->bus_id); -+ if (drv_data->workqueue == NULL) -+ return -EBUSY; -+ -+ return 0; -+} -+ -+static int start_queue(struct driver_data *drv_data) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ -+ if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ return -EBUSY; -+ } -+ -+ drv_data->run = QUEUE_RUNNING; -+ drv_data->cur_msg = NULL; -+ drv_data->cur_transfer = NULL; -+ drv_data->cur_chip = NULL; -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ -+ queue_work(drv_data->workqueue, &drv_data->pump_messages); -+ -+ return 0; -+} -+ -+static int stop_queue(struct driver_data *drv_data) -+{ -+ unsigned long flags; -+ unsigned limit = 500; -+ int status = 0; -+ -+ spin_lock_irqsave(&drv_data->lock, flags); -+ -+ /* This is a bit lame, but is optimized for the common execution path. -+ * A wait_queue on the drv_data->busy could be used, but then the common -+ * execution path (pump_messages) would be required to call wake_up or -+ * friends on every SPI message. Do this instead */ -+ drv_data->run = QUEUE_STOPPED; -+ while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ msleep(10); -+ spin_lock_irqsave(&drv_data->lock, flags); -+ } -+ -+ if (!list_empty(&drv_data->queue) || drv_data->busy) -+ status = -EBUSY; -+ -+ spin_unlock_irqrestore(&drv_data->lock, flags); -+ -+ return status; -+} -+ -+static int destroy_queue(struct driver_data *drv_data) -+{ -+ int status; -+ -+ status = stop_queue(drv_data); -+ if (status != 0) -+ return status; -+ -+ destroy_workqueue(drv_data->workqueue); -+ -+ return 0; -+} -+ -+ -+static void cleanup(struct spi_device *spi) -+{ -+ struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); -+ -+ dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n", -+ spi->master->bus_num, spi->chip_select); -+ -+ kfree(chip); -+} -+ -+ -+/****************************************************************************/ -+ -+/* -+ * Generic Device driver routines and interface implementation -+ */ -+ -+static int coldfire_spi_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct coldfire_spi_master *platform_info; -+ struct spi_master *master; -+ struct driver_data *drv_data = 0; -+ struct resource *memory_resource; -+ int irq; -+ int status = 0; -+ int i; -+ -+ platform_info = (struct coldfire_spi_master *)pdev->dev.platform_data; -+ -+ master = spi_alloc_master(dev, sizeof(struct driver_data)); -+ if (!master) -+ return -ENOMEM; -+ -+ drv_data = spi_master_get_devdata(master); -+ drv_data->master = master; -+ -+ INIT_LIST_HEAD(&drv_data->queue); -+ spin_lock_init(&drv_data->lock); -+ -+ master->bus_num = platform_info->bus_num; -+ master->num_chipselect = platform_info->num_chipselect; -+ master->cleanup = cleanup; -+ master->setup = setup; -+ master->transfer = transfer; -+ -+ drv_data->cs_control = platform_info->cs_control; -+ if (drv_data->cs_control) -+ for(i = 0; i < master->num_chipselect; i++) -+ drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP); -+ -+ /* Setup register addresses */ -+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-module"); -+ if (!memory_resource) { -+ dev_dbg(dev, "can not find platform module memory\n"); -+ goto out_error_master_alloc; -+ } -+ -+#if defined(SPI_DSPI_EDMA) -+ drv_data->edma_tx_buf = kmalloc(EDMA_BUFSIZE_KMALLOC, GFP_DMA); -+ if (!drv_data->edma_tx_buf) { -+ dev_dbg(dev, "cannot allocate eDMA TX memory\n"); -+ goto out_error_master_alloc; -+ } -+ drv_data->edma_rx_buf = kmalloc(EDMA_BUFSIZE_KMALLOC, GFP_DMA); -+ if (!drv_data->edma_rx_buf) { -+ kfree(drv_data->edma_tx_buf); -+ dev_dbg(dev, "cannot allocate eDMA RX memory\n"); -+ goto out_error_master_alloc; -+ } -+#endif -+ -+#if defined(SPI_DSPI) -+ -+ drv_data->mcr = (void *)(memory_resource->start + 0x00000000); -+ drv_data->ctar = (void *)(memory_resource->start + 0x0000000C); -+ drv_data->dspi_sr = (void *)(memory_resource->start + 0x0000002C); -+ drv_data->dspi_rser = (void *)(memory_resource->start + 0x00000030); -+ drv_data->dspi_dtfr = (void *)(memory_resource->start + 0x00000034); -+ drv_data->dspi_drfr = (void *)(memory_resource->start + 0x00000038); -+ -+#else -+ -+ drv_data->qmr = (void *)(memory_resource->start + 0x00000000); -+ drv_data->qdlyr = (void *)(memory_resource->start + 0x00000004); -+ drv_data->qwr = (void *)(memory_resource->start + 0x00000008); -+ drv_data->qir = (void *)(memory_resource->start + 0x0000000c); -+ drv_data->qar = (void *)(memory_resource->start + 0x00000010); -+ drv_data->qdr = (void *)(memory_resource->start + 0x00000014); -+ drv_data->qcr = (void *)(memory_resource->start + 0x00000014); -+ -+#endif -+ -+ /* Setup register addresses */ -+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-par"); -+ if (!memory_resource) { -+ dev_dbg(dev, "can not find platform par memory\n"); -+ goto out_error_master_alloc; -+ } -+ -+ drv_data->par = (void *)memory_resource->start; -+ -+ /* Setup register addresses */ -+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-int-level"); -+ if (!memory_resource) { -+ dev_dbg(dev, "can not find platform par memory\n"); -+ goto out_error_master_alloc; -+ } -+ -+ drv_data->int_icr = (void *)memory_resource->start; -+ -+ /* Setup register addresses */ -+ memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spi-int-mask"); -+ if (!memory_resource) { -+ dev_dbg(dev, "can not find platform par memory\n"); -+ goto out_error_master_alloc; -+ } -+ -+ drv_data->int_mr = (void *)memory_resource->start; -+ -+ if (platform_info->irq_list) { -+ /* multiple IRQs */ -+ int *irqlist = platform_info->irq_list; -+ while ((irq = *irqlist++)) { -+ int off = *irqlist++; -+ int lvl = *irqlist++; -+ int msk = *irqlist++; -+ status = request_irq(irq, qspi_interrupt, IRQF_DISABLED, -+ dev->bus_id, drv_data); -+ if (status < 0) { -+ dev_err(&pdev->dev, -+ "unable to attach ColdFire DSPI interrupt\n"); -+ goto out_error_master_alloc; -+ } -+ -+ if (lvl) -+ *(drv_data->int_icr + off) = lvl; -+ -+ if (msk) -+ *drv_data->int_mr &= ~msk; -+ } -+ } -+ else { -+ irq = platform_info->irq_vector; -+ -+ status = request_irq(platform_info->irq_vector, qspi_interrupt, -+ IRQF_DISABLED, dev->bus_id, drv_data); -+ if (status < 0) { -+ dev_err(&pdev->dev, "unable to attach ColdFire QSPI interrupt\n"); -+ goto out_error_master_alloc; -+ } -+ -+ *drv_data->int_icr = platform_info->irq_lp; -+ *drv_data->int_mr &= ~platform_info->irq_mask; -+ } -+ -+ /* Now that we have all the addresses etc. Let's set it up */ -+ if (platform_info->par_val) -+ *drv_data->par = platform_info->par_val; -+ -+#ifdef CONFIG_M5227x -+ MCF_GPIO_PAR_IRQ = 0x04; /* Mistake in RM documentation */ -+#endif -+ -+#ifdef SPI_DSPI -+ drv_data->dspi_ctas = 0; /* TBD: change later */ -+#endif -+ -+ /* Initial and start queue */ -+ status = init_queue(drv_data); -+ if (status != 0) { -+ dev_err(&pdev->dev, "problem initializing queue\n"); -+ goto out_error_irq_alloc; -+ } -+ status = start_queue(drv_data); -+ if (status != 0) { -+ dev_err(&pdev->dev, "problem starting queue\n"); -+ goto out_error_irq_alloc; -+ } -+ -+ /* Register with the SPI framework */ -+ platform_set_drvdata(pdev, drv_data); -+ status = spi_register_master(master); -+ if (status != 0) { -+ dev_err(&pdev->dev, "problem registering spi master\n"); -+ status = -EINVAL; -+ goto out_error_queue_alloc; -+ } -+ -+#if defined(SPI_DSPI_EDMA) -+ if (mcf_edma_request_channel(DSPI_DMA_TX_TCD, -+ edma_tx_handler, -+ NULL, -+ pdev, -+ NULL, /* spinlock */ -+ DRIVER_NAME -+ )!=0) { -+ dev_err(&pdev->dev, "problem requesting edma transmit channel\n"); -+ status = -EINVAL; -+ goto out_error_queue_alloc; -+ } -+ -+ if (mcf_edma_request_channel(DSPI_DMA_RX_TCD, -+ edma_rx_handler, -+ NULL, -+ pdev, -+ NULL, /* spinlock */ -+ DRIVER_NAME -+ )!=0) { -+ dev_err(&pdev->dev, "problem requesting edma receive channel\n"); -+ status = -EINVAL; -+ goto out_edma_transmit; -+ } -+#endif -+ -+ printk(KERN_INFO "SPI: Coldfire master initialized\n" ); -+ return status; -+ -+#if defined(SPI_DSPI_EDMA) -+out_edma_transmit: -+ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev); -+#endif -+ -+out_error_queue_alloc: -+ destroy_queue(drv_data); -+ -+out_error_irq_alloc: -+ free_irq(irq, drv_data); -+ -+out_error_master_alloc: -+ spi_master_put(master); -+ return status; -+ -+} -+ -+static int coldfire_spi_remove(struct platform_device *pdev) -+{ -+ struct driver_data *drv_data = platform_get_drvdata(pdev); -+ int irq; -+ int status = 0; -+ -+ if (!drv_data) -+ return 0; -+ -+#if defined(SPI_DSPI_EDMA) -+ mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev); -+ mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev); -+#endif -+ -+ /* Remove the queue */ -+ status = destroy_queue(drv_data); -+ if (status != 0) -+ return status; -+ -+ /* Release IRQ */ -+/* JKM -- check for list and remove list */ -+ irq = platform_get_irq(pdev, 0); -+ if (irq >= 0) -+ free_irq(irq, drv_data); -+ -+ /* Disconnect from the SPI framework */ -+ spi_unregister_master(drv_data->master); -+ -+ /* Prevent double remove */ -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+ -+static void coldfire_spi_shutdown(struct platform_device *pdev) -+{ -+ int status = 0; -+ -+ if ((status = coldfire_spi_remove(pdev)) != 0) -+ dev_err(&pdev->dev, "shutdown failed with %d\n", status); -+} -+ -+ -+#ifdef CONFIG_PM -+static int suspend_devices(struct device *dev, void *pm_message) -+{ -+ pm_message_t *state = pm_message; -+ -+ if (dev->power.power_state.event != state->event) { -+ dev_warn(dev, "pm state does not match request\n"); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+static int coldfire_spi_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct driver_data *drv_data = platform_get_drvdata(pdev); -+ int status = 0; -+ -+ /* Check all childern for current power state */ -+ if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) { -+ dev_warn(&pdev->dev, "suspend aborted\n"); -+ return -1; -+ } -+ -+ status = stop_queue(drv_data); -+ if (status != 0) -+ return status; -+ -+ return 0; -+} -+ -+static int coldfire_spi_resume(struct platform_device *pdev) -+{ -+ struct driver_data *drv_data = platform_get_drvdata(pdev); -+ int status = 0; -+ -+ /* Start the queue running */ -+ status = start_queue(drv_data); -+ if (status != 0) { -+ dev_err(&pdev->dev, "problem starting queue (%d)\n", status); -+ return status; -+ } -+ -+ return 0; -+} -+#else -+#define coldfire_spi_suspend NULL -+#define coldfire_spi_resume NULL -+#endif /* CONFIG_PM */ -+ -+static struct platform_driver driver = { -+ .driver = { -+ .name = "spi_coldfire", -+ .bus = &platform_bus_type, -+ .owner = THIS_MODULE, -+ }, -+ .probe = coldfire_spi_probe, -+ .remove = __devexit_p(coldfire_spi_remove), -+ .shutdown = coldfire_spi_shutdown, -+ .suspend = coldfire_spi_suspend, -+ .resume = coldfire_spi_resume, -+}; -+ -+static int __init coldfire_spi_init(void) -+{ -+ platform_driver_register(&driver); -+ -+ return 0; -+} -+module_init(coldfire_spi_init); -+ -+static void __exit coldfire_spi_exit(void) -+{ -+ platform_driver_unregister(&driver); -+} -+module_exit(coldfire_spi_exit); ---- /dev/null -+++ b/drivers/spi/spi-m5445x.c -@@ -0,0 +1,156 @@ -+/***************************************************************************/ -+/* -+ * linux/arch/m68k/coldfire/spi-m5445x.c -+ * -+ * Sub-architcture dependant initialization code for the Freescale -+ * 5445x SPI module -+ * -+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com -+ * Copyright Freescale Semiconductor, Inc 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+/***************************************************************************/ -+ -+ -+#include <linux/kernel.h> -+#include <linux/sched.h> -+#include <linux/param.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/device.h> -+#include <linux/platform_device.h> -+#include <linux/spi/spi.h> -+ -+#include <asm/dma.h> -+#include <asm/traps.h> -+#include <asm/machdep.h> -+#include <asm/coldfire.h> -+#include <asm/mcfsim.h> -+#include <asm/mcfqspi.h> -+#include <asm/mcf5445x_gpio.h> -+ -+#define SPI_NUM_CHIPSELECTS 0x10 -+#define SPI_PAR_VAL (0 | MCF_GPIO_PAR_DSPI_PCS5_PCS5 | MCF_GPIO_PAR_DSPI_PCS2_PCS2 \ -+ | MCF_GPIO_PAR_DSPI_PCS1_PCS1 | MCF_GPIO_PAR_DSPI_PCS0_PCS0 | MCF_GPIO_PAR_DSPI_SIN_SIN \ -+ | MCF_GPIO_PAR_DSPI_SOUT_SOUT | MCF_GPIO_PAR_DSPI_SCK_SCK) -+ -+#define MCF5445x_DSPI_IRQ_SOURCE (31) -+#define MCF5445x_DSPI_IRQ_VECTOR (64 + MCF5445x_DSPI_IRQ_SOURCE) -+ -+#define MCF5445x_DSPI_PAR (0xFC0A4063) -+#define MCF5445x_DSPI_MCR (0xFC05C000) -+#define MCF5445x_INTC0_ICR (0xFC048040) -+#define MCF5445x_INTC0_IMRL (0xFC04800C) -+ -+ -+#define M5445x_AUDIO_IRQ_SOURCE 49 -+#define M5445x_AUDIO_IRQ_VECTOR (128+M5445x_AUDIO_IRQ_SOURCE) -+#define M5445x_AUDIO_IRQ_LEVEL 4 -+ -+void coldfire_qspi_cs_control(u8 cs, u8 command) -+{ -+} -+ -+#if defined(CONFIG_SPI_COLDFIRE_SSI_AUDIO) -+static struct coldfire_spi_chip ssi_audio_chip_info = { -+ .mode = SPI_MODE_0, -+ .bits_per_word = 16, -+ .del_cs_to_clk = 16, -+ .del_after_trans = 16, -+ .void_write_data = 0 -+}; -+ -+#endif -+ -+static struct spi_board_info spi_board_info[] = { -+ -+#if defined(CONFIG_SPI_COLDFIRE_SSI_AUDIO) -+ { -+ .modalias = "ssi_audio", -+ .max_speed_hz = 300000, -+ .bus_num = 1, -+ .chip_select = 5, -+ .irq = M5445x_AUDIO_IRQ_VECTOR, -+ .platform_data = NULL, -+ .controller_data = &ssi_audio_chip_info -+ } -+#endif -+ -+}; -+ -+static struct coldfire_spi_master coldfire_master_info = { -+ .bus_num = 1, -+ .num_chipselect = SPI_NUM_CHIPSELECTS, -+ .irq_source = MCF5445x_DSPI_IRQ_SOURCE, -+ .irq_vector = MCF5445x_DSPI_IRQ_VECTOR, -+ .irq_mask = (0x01 << MCF5445x_DSPI_IRQ_SOURCE), -+ .irq_lp = 0x2, /* Level */ -+ .par_val = SPI_PAR_VAL, -+// .par_val16 = SPI_PAR_VAL, -+ .cs_control = coldfire_qspi_cs_control, -+}; -+ -+static struct resource coldfire_spi_resources[] = { -+ [0] = { -+ .name = "qspi-par", -+ .start = MCF5445x_DSPI_PAR, -+ .end = MCF5445x_DSPI_PAR, -+ .flags = IORESOURCE_MEM -+ }, -+ -+ [1] = { -+ .name = "qspi-module", -+ .start = MCF5445x_DSPI_MCR, -+ .end = MCF5445x_DSPI_MCR + 0xB8, -+ .flags = IORESOURCE_MEM -+ }, -+ -+ [2] = { -+ .name = "qspi-int-level", -+ .start = MCF5445x_INTC0_ICR + MCF5445x_DSPI_IRQ_SOURCE, -+ .end = MCF5445x_INTC0_ICR + MCF5445x_DSPI_IRQ_SOURCE, -+ .flags = IORESOURCE_MEM -+ }, -+ -+ [3] = { -+ .name = "qspi-int-mask", -+ .start = MCF5445x_INTC0_IMRL, -+ .end = MCF5445x_INTC0_IMRL, -+ .flags = IORESOURCE_MEM -+ } -+}; -+ -+static struct platform_device coldfire_spi = { -+ .name = "spi_coldfire", //"coldfire-qspi", -+ .id = -1, -+ .resource = coldfire_spi_resources, -+ .num_resources = ARRAY_SIZE(coldfire_spi_resources), -+ .dev = { -+ .platform_data = &coldfire_master_info, -+ } -+}; -+ -+static int __init spi_dev_init(void) -+{ -+ int retval = 0; -+ -+ retval = platform_device_register(&coldfire_spi); -+ -+ if (retval < 0) { -+ printk(KERN_ERR "SPI-m5445x: platform_device_register failed with code=%d\n", retval); -+ goto out; -+ } -+ -+ if (ARRAY_SIZE(spi_board_info)) -+ retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); -+ -+ -+out: -+ return retval; -+} -+ -+arch_initcall(spi_dev_init); ---- /dev/null -+++ b/drivers/spi/ssi_audio.c -@@ -0,0 +1,921 @@ -+/* -+ * MCF5445x audio driver. -+ * -+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com -+ * Copyright Freescale Semiconductor, Inc. 2006, 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include <linux/device.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/spi/spi.h> -+#include <linux/fs.h> -+#include <linux/kernel.h> -+#include <linux/major.h> -+#include <asm/mcfsim.h> -+#include <linux/interrupt.h> -+#include <linux/soundcard.h> -+#include <asm/uaccess.h> -+#include <asm/virtconvert.h> -+ -+#include <asm/coldfire.h> -+#include <asm/coldfire_edma.h> -+#ifdef CONFIG_M5445X -+#include <asm/mcf5445x_ssi.h> -+#include <asm/mcf5445x_ccm.h> -+#include <asm/mcf5445x_gpio.h> -+#endif -+ -+#define SOUND_DEVICE_NAME "sound" -+#define DRIVER_NAME "ssi_audio" -+ -+/* #define AUDIO_DEBUG */ -+ -+#ifdef CONFIG_MMU -+#define USE_MMU -+#endif -+ -+#define MAX_SPEED_HZ 12000000 -+ -+#define M5445x_AUDIO_IRQ_SOURCE 49 -+#define M5445x_AUDIO_IRQ_VECTOR (128+M5445x_AUDIO_IRQ_SOURCE) -+#define M5445x_AUDIO_IRQ_LEVEL 5 -+ -+/* TLV320DAC23 audio chip registers */ -+ -+#define CODEC_LEFT_IN_REG (0x00) -+#define CODEC_RIGHT_IN_REG (0x01) -+#define CODEC_LEFT_HP_VOL_REG (0x02) -+#define CODEC_RIGHT_HP_VOL_REG (0x03) -+#define CODEC_ANALOG_APATH_REG (0x04) -+#define CODEC_DIGITAL_APATH_REG (0x05) -+#define CODEC_POWER_DOWN_REG (0x06) -+#define CODEC_DIGITAL_IF_FMT_REG (0x07) -+#define CODEC_SAMPLE_RATE_REG (0x08) -+#define CODEC_DIGITAL_IF_ACT_REG (0x09) -+#define CODEC_RESET_REG (0x0f) -+ -+#define CODEC_SAMPLE_8KHZ (0x0C) -+#define CODEC_SAMPLE_16KHZ (0x58) -+#define CODEC_SAMPLE_22KHZ (0x62) -+#define CODEC_SAMPLE_32KHZ (0x18) -+#define CODEC_SAMPLE_44KHZ (0x22) -+#define CODEC_SAMPLE_48KHZ (0x00) -+ -+/* Audio buffer data size */ -+#define BUFSIZE (64*1024) -+/* DMA transfer size */ -+#define DMASIZE (16*1024) -+ -+/* eDMA channel for SSI channel 0 TX */ -+#define DMA_TCD MCF_EDMA_CHAN_TIMER2 -+/* eDMA channel for SSI channel 1 TX */ -+#define DMA_TCD2 MCF_EDMA_CHAN_TIMER3 -+ -+struct ssi_audio { -+ struct spi_device *spi; -+ u32 speed; -+ u32 stereo; -+ u32 bits; -+ u32 format; -+ u8 isopen; -+ u8 dmaing; -+ u8 ssi_enabled; -+ u8 channel; -+ spinlock_t lock; -+ u8* audio_buf; -+}; -+ -+static struct ssi_audio* audio_device = NULL; -+volatile u32 audio_start; -+volatile u32 audio_count; -+volatile u32 audio_append; -+volatile u32 audio_appstart; -+volatile u32 audio_txbusy; -+ -+struct ssi_audio_format { -+ unsigned int format; -+ unsigned int bits; -+} ssi_audio_formattable[] = { -+ { AFMT_MU_LAW, 8 }, -+ { AFMT_A_LAW, 8 }, -+ { AFMT_IMA_ADPCM, 8 }, -+ { AFMT_U8, 8 }, -+ { AFMT_S16_LE, 16 }, -+ { AFMT_S16_BE, 16 }, -+ { AFMT_S8, 8 }, -+ { AFMT_U16_LE, 16 }, -+ { AFMT_U16_BE, 16 }, -+}; -+ -+#define FORMATSIZE (sizeof(ssi_audio_formattable) / sizeof(struct ssi_audio_format)) -+ -+static void ssi_audio_setsamplesize(int val) -+{ -+ int i; -+ -+ if (audio_device == NULL) return; -+ -+ for (i = 0; (i < FORMATSIZE); i++) { -+ if (ssi_audio_formattable[i].format == val) { -+ audio_device->format = ssi_audio_formattable[i].format; -+ audio_device->bits = ssi_audio_formattable[i].bits; -+ break; -+ } -+ } -+ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_setsamplesize %d %d\n", -+ audio_device->format, audio_device->bits); -+#endif -+} -+ -+static void ssi_audio_txdrain(void) -+{ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_txdrain()\n"); -+#endif -+ -+ if (audio_device == NULL) return; -+ -+ while (!signal_pending(current)) { -+ if (audio_txbusy == 0) -+ break; -+ current->state = TASK_INTERRUPTIBLE; -+ schedule_timeout(1); -+ } -+} -+ -+#ifdef CONFIG_SSIAUDIO_USE_EDMA -+/* -+ * Configure and start DMA engine. -+ */ -+void __inline__ ssi_audio_dmarun(void) -+{ -+ set_edma_params(DMA_TCD, -+#ifdef USE_MMU -+ virt_to_phys(&(audio_device->audio_buf[audio_start])), -+#else -+ (u32)&(audio_device->audio_buf[audio_start]), -+#endif -+ (u32)&MCF_SSI_TX0, -+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, -+ 8, -+ 4, -+ 0, -+ audio_count/8, -+ audio_count/8, -+ 0, -+ 0, -+ 0, // major_int -+ 0 // disable_req -+ ); -+ -+ set_edma_params(DMA_TCD2, -+#ifdef USE_MMU -+ virt_to_phys(&(audio_device->audio_buf[audio_start+4])), -+#else -+ (u32)&(audio_device->audio_buf[audio_start+4]), -+#endif -+ (u32)&MCF_SSI_TX1, -+ MCF_EDMA_TCD_ATTR_SSIZE_32BIT | MCF_EDMA_TCD_ATTR_DSIZE_32BIT, -+ 8, -+ 4, -+ 0, -+ audio_count/8, -+ audio_count/8, -+ 0, -+ 0, -+ 1, // major_int -+ 0 // disable_req -+ ); -+ -+ audio_device->dmaing = 1; -+ audio_txbusy = 1; -+ -+ start_edma_transfer(DMA_TCD); -+ start_edma_transfer(DMA_TCD2); -+} -+ -+/** -+ * ssi_audio_dmabuf - Start DMA'ing a new buffer of data if any available. -+ */ -+static void ssi_audio_dmabuf(void) -+{ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_dmabuf(): append=%x start=%x\n", -+ audio_append, audio_appstart); -+#endif -+ -+ /* If already running then nothing to do... */ -+ if (audio_device->dmaing) -+ return; -+ -+ /* Set DMA buffer size */ -+ audio_count = (audio_append >= audio_appstart) ? -+ (audio_append - audio_appstart) : -+ (BUFSIZE - audio_appstart); -+ if (audio_count > DMASIZE) -+ audio_count = DMASIZE; -+ -+ /* Adjust pointers and counters accordingly */ -+ audio_appstart += audio_count; -+ if (audio_appstart >= BUFSIZE) -+ audio_appstart = 0; -+ -+ if (audio_count > 0) -+ ssi_audio_dmarun(); -+ else { -+ audio_txbusy = 0; -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":DMA buffer is empty!\n"); -+#endif -+ } -+} -+ -+void __inline__ stop_dma(void) -+{ -+ stop_edma_transfer(DMA_TCD); -+ stop_edma_transfer(DMA_TCD2); -+} -+ -+static int ssi_audio_dma_handler_empty(int channel, void *dev_id) -+{ -+ return IRQ_HANDLED; -+} -+ -+static int ssi_audio_dma_handler(int channel, void *dev_id) -+{ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_dma_handler(channel=%d)\n", channel); -+#endif -+ -+ /* Clear DMA interrupt */ -+ stop_dma(); -+ -+ audio_device->dmaing = 0; -+ -+ /* Update data pointers and counts */ -+ audio_start += audio_count; -+ if (audio_start >= BUFSIZE) -+ audio_start = 0; -+ audio_count = 0; -+ -+ /* Start new DMA buffer if we can */ -+ ssi_audio_dmabuf(); -+ -+ return IRQ_HANDLED; -+} -+ -+static void init_dma(void) -+{ -+ /* SSI DMA Signals mapped to DMA request */ -+ MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_TIMDMA; -+ init_edma(); -+} -+ -+#endif /* CONFIG_SSIAUDIO_USE_EDMA */ -+ -+/* Write CODEC register using SPI -+ * address - CODEC register address -+ * data - data to be written into register -+ */ -+static int codec_write(u8 addr, u16 data) -+{ -+ u16 spi_word; -+ -+ if (audio_device==NULL || audio_device->spi==NULL) -+ return -ENODEV; -+ -+ spi_word = ((addr & 0x7F)<<9)|(data & 0x1FF); -+ return spi_write(audio_device->spi, (const u8*)&spi_word, -+ sizeof(spi_word)); -+} -+ -+static inline void enable_ssi(void) -+{ -+ if (audio_device==NULL || audio_device->ssi_enabled) return; -+ audio_device->ssi_enabled = 1; -+ MCF_SSI_CR |= MCF_SSI_CR_SSI_EN; /* enable SSI module */ -+ MCF_SSI_CR |= MCF_SSI_CR_TE; /* enable tranmitter */ -+} -+ -+static inline void disable_ssi(void) -+{ -+ if (audio_device==NULL || audio_device->ssi_enabled==0) return; -+ MCF_SSI_CR &= ~MCF_SSI_CR_TE; /* disable transmitter */ -+ MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN; /* disable SSI module */ -+ audio_device->ssi_enabled = 0; -+} -+ -+/* Audio CODEC initialization */ -+static void adjust_codec_speed(void) { -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":adjust_codec_speed: %d\n", audio_device->speed); -+#endif -+ disable_ssi(); -+ switch (audio_device->speed) { -+ case 8000: -+ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(255); -+ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_8KHZ); -+ break; -+ case 16000: -+ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(129); -+ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_16KHZ); -+ break; -+ case 22000: -+ case 22050: -+ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(94); -+ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_22KHZ); -+ break; -+ case 44000: -+ case 44100: -+ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47); -+ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ); -+ break; -+ case 48000: -+ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(42); -+ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_48KHZ); -+ break; -+ default: -+ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47); -+ codec_write(CODEC_SAMPLE_RATE_REG,CODEC_SAMPLE_44KHZ); -+ } -+} -+ -+static void codec_reset(void) -+{ -+ codec_write(CODEC_RESET_REG, 0); /* reset the audio chip */ -+ udelay(1500); /* wait for reset */ -+} -+ -+static void init_audio_codec(void) -+{ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":init_audio_codec()\n"); -+#endif -+ codec_reset(); -+ -+ codec_write(CODEC_LEFT_IN_REG, 0x017); -+ codec_write(CODEC_RIGHT_IN_REG, 0x017); -+ codec_write(CODEC_POWER_DOWN_REG, 0x000); /* Turn off line input */ -+ codec_write(CODEC_DIGITAL_IF_FMT_REG, 0x00A); /* I2S slave mode */ -+ /* codec_write(CODEC_DIGITAL_IF_FMT_REG, 0x042); // I2S master mode */ -+ codec_write(CODEC_DIGITAL_APATH_REG, 0x007); /* Set A path */ -+ -+ /* set sample rate */ -+ adjust_codec_speed(); -+ -+ codec_write(CODEC_LEFT_HP_VOL_REG, 0x075); /* set volume */ -+ codec_write(CODEC_RIGHT_HP_VOL_REG, 0x075); /* set volume */ -+ codec_write(CODEC_DIGITAL_IF_ACT_REG, 1); /* Activate digital interface */ -+ codec_write(CODEC_ANALOG_APATH_REG, 0x0F2); -+} -+ -+ -+static void chip_init(void) -+{ -+#ifdef CONFIG_SSIAUDIO_USE_EDMA -+ init_dma(); -+#endif -+ -+ /* Enable the SSI pins */ -+ MCF_GPIO_PAR_SSI = (0 -+ | MCF_GPIO_PAR_SSI_MCLK -+ | MCF_GPIO_PAR_SSI_STXD(3) -+ | MCF_GPIO_PAR_SSI_SRXD(3) -+ | MCF_GPIO_PAR_SSI_FS(3) -+ | MCF_GPIO_PAR_SSI_BCLK(3) ); -+} -+ -+static void init_ssi(void) -+{ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":init_ssi()\n"); -+#endif -+ -+ /* Dividers are for MCF54445 on 266Mhz, the output is 44.1Khz*/ -+ /* Enable SSI clock in CCM */ -+ MCF_CCM_CDR = MCF_CCM_CDR_SSIDIV(47); -+ -+ /* Issue a SSI reset */ -+ MCF_SSI_CR &= ~MCF_SSI_CR_SSI_EN; /* disable SSI module */ -+ -+ /* SSI module uses internal CPU clock */ -+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSISRC; -+ -+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSIPUE; -+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_SSIPUS_UP; -+ -+ MCF_SSI_CR = 0 -+ | MCF_SSI_CR_CIS -+ | MCF_SSI_CR_TCH /* Enable two channel mode */ -+ | MCF_SSI_CR_MCE /* Set clock out on SSI_MCLK pin */ -+ | MCF_SSI_CR_I2S_MASTER /* Set I2S master mode */ -+ | MCF_SSI_CR_SYN /* Enable synchronous mode */ -+ | MCF_SSI_CR_NET -+ ; -+ -+ MCF_SSI_TCR = 0 -+ | MCF_SSI_TCR_TXDIR /* internally generated bit clock */ -+ | MCF_SSI_TCR_TFDIR /* internally generated frame sync */ -+ | MCF_SSI_TCR_TSCKP /* Clock data on falling edge of bit clock */ -+ | MCF_SSI_TCR_TFSI /* Frame sync active low */ -+ | MCF_SSI_TCR_TEFS /* TX frame sync 1 bit before data */ -+ | MCF_SSI_TCR_TFEN0 /* TX FIFO 0 enabled */ -+ | MCF_SSI_TCR_TFEN1 /* TX FIFO 1 enabled */ -+ | MCF_SSI_TCR_TXBIT0 -+ ; -+ -+ MCF_SSI_CCR = MCF_SSI_CCR_WL(7) /* 16 bit word length */ -+ | MCF_SSI_CCR_DC(1) /* Frame rate divider */ -+ | MCF_SSI_CCR_PM(0) -+ | MCF_SSI_CCR_DIV2 -+ ; -+ -+ MCF_SSI_FCSR = 0 -+ | MCF_SSI_FCSR_TFWM0(2) -+ | MCF_SSI_FCSR_TFWM1(2) -+ ; -+ -+ MCF_SSI_IER = 0 // interrupts -+#ifndef CONFIG_SSIAUDIO_USE_EDMA -+ | MCF_SSI_IER_TIE /* transmit interrupts */ -+ | MCF_SSI_IER_TFE0 /* transmit FIFO 0 empty */ -+ | MCF_SSI_IER_TFE1 /* transmit FIFO 1 empty */ -+#else -+ | MCF_SSI_IER_TDMAE /* DMA request enabled */ -+ | MCF_SSI_IER_TFE0 /* transmit FIFO 0 empty */ -+ | MCF_SSI_IER_TFE1 /* transmit FIFO 1 empty */ -+#endif -+ ; -+ -+#ifndef CONFIG_SSIAUDIO_USE_EDMA -+ /* enable IRQ: SSI interrupt */ -+ MCF_INTC1_ICR(M5445x_AUDIO_IRQ_SOURCE) = M5445x_AUDIO_IRQ_LEVEL; -+ MCF_INTC1_CIMR = M5445x_AUDIO_IRQ_SOURCE; -+#endif -+} -+ -+#ifndef CONFIG_SSIAUDIO_USE_EDMA -+/* interrupt for SSI */ -+static int ssi_audio_isr(int irq, void *dev_id) -+{ -+ unsigned long *bp; -+ -+ if (audio_txbusy==0) -+ return IRQ_HANDLED; -+ -+ spin_lock(&(audio_device->lock)); -+ -+ if (audio_start == audio_append) { -+ disable_ssi(); -+ audio_txbusy = 0; -+ } else { -+ if (MCF_SSI_ISR & (MCF_SSI_ISR_TFE0|MCF_SSI_ISR_TFE1)) { -+ bp = (unsigned long *) &audio_device->audio_buf[audio_start]; -+ if (audio_device->channel) { -+ MCF_SSI_TX1 = *bp; -+ audio_device->channel = 0; -+ } else { -+ MCF_SSI_TX0 = *bp; -+ audio_device->channel = 1; -+ } -+ audio_start += 4; -+ if (audio_start >= BUFSIZE) -+ audio_start = 0; -+ } -+ } -+ -+ spin_unlock(&(audio_device->lock)); -+ -+ return IRQ_HANDLED; -+} -+#endif -+ -+/* Set initial driver playback defaults. */ -+static void init_driver_variables(void) -+{ -+ audio_device->speed = 44100; -+ audio_device->format = AFMT_S16_LE; -+ audio_device->bits = 16; -+ audio_device->stereo = 1; -+ audio_device->ssi_enabled = 0; -+ -+ audio_start = 0; -+ audio_count = 0; -+ audio_append = 0; -+ audio_appstart = 0; -+ audio_txbusy = 0; -+ audio_device->dmaing = 0; -+} -+ -+/* open audio device */ -+static int ssi_audio_open(struct inode *inode, struct file *filp) -+{ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_open()\n"); -+#endif -+ -+ if (audio_device==NULL) return (-ENODEV); -+ -+ if (audio_device->isopen) -+ return(-EBUSY); -+ -+ spin_lock(&(audio_device->lock)); -+ -+ audio_device->isopen = 1; -+ -+ init_driver_variables(); -+ init_ssi(); -+ init_audio_codec(); -+ -+ spin_unlock(&(audio_device->lock)); -+ -+ udelay(100); -+ -+ return 0; -+} -+ -+/* close audio device */ -+static int ssi_audio_close(struct inode *inode, struct file *filp) -+{ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_close()\n"); -+#endif -+ -+ if (audio_device==NULL) return (-ENODEV); -+ -+ ssi_audio_txdrain(); -+ -+ spin_lock(&(audio_device->lock)); -+ -+#ifdef CONFIG_SSIAUDIO_USE_EDMA -+ stop_dma(); -+#endif -+ disable_ssi(); -+ codec_reset(); -+ init_driver_variables(); -+ audio_device->isopen = 0; -+ -+ spin_unlock(&(audio_device->lock)); -+ return 0; -+} -+ -+/* write to audio device */ -+static ssize_t ssi_audio_write(struct file *filp, const char *buf, -+ size_t count, loff_t *ppos) -+{ -+ unsigned long *dp, *buflp; -+ unsigned short *bufwp; -+ unsigned char *bufbp; -+ unsigned int slen, bufcnt, i, s, e; -+ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_write(buf=%x,count=%d)\n", -+ (int)buf, count); -+#endif -+ -+ if (audio_device==NULL) -+ return (-ENODEV); -+ -+ if (count <= 0) -+ return 0; -+ -+ spin_lock(&(audio_device->lock)); -+ -+ buflp = (unsigned long *) buf; -+ bufwp = (unsigned short *) buf; -+ bufbp = (unsigned char *) buf; -+ -+ bufcnt = count & ~0x3; -+ -+ bufcnt <<= 1; -+ if (audio_device->stereo == 0) -+ bufcnt <<= 1; -+ if (audio_device->bits == 8) -+ bufcnt <<= 1; -+ -+tryagain: -+ /* -+ * Get a snapshot of buffer, so we can figure out how -+ * much data we can fit in... -+ */ -+ s = audio_start; -+ e = audio_append; -+ dp = (unsigned long *) &(audio_device->audio_buf[e]); -+ -+ slen = ((s > e) ? (s - e) : (BUFSIZE - (e - s))) - 4; -+ if (slen > bufcnt) -+ slen = bufcnt; -+ if ((BUFSIZE - e) < slen) -+ slen = BUFSIZE - e; -+ -+ if (slen == 0) { -+ if (signal_pending(current)) -+ return(-ERESTARTSYS); -+ set_current_state(TASK_INTERRUPTIBLE); -+ schedule_timeout(1); -+ goto tryagain; -+ } -+ -+ /* -+ * For DMA we need to have data as 32 bit -+ * values (since SSI TX register is 32 bit). -+ * So, the incoming 16 bit data must be put to buffer as 32 bit values. -+ * Also, the endianess is converted if needed -+ */ -+ if (audio_device->stereo) { -+ if (audio_device->bits == 16) { -+ if (audio_device->format==AFMT_S16_LE) { -+ /*- convert endianess, probably could be done by SSI also */ -+ for (i = 0; (i < slen); i += 4) { -+ unsigned short val = le16_to_cpu((*bufwp++)); -+ *dp++ = val; -+ } -+ } else { -+ for (i = 0; (i < slen); i += 4) { -+ *dp++ = *bufwp++; -+ } -+ } -+ } else { -+ for (i = 0; (i < slen); i += 4) { -+ *dp = (((unsigned long) *bufbp++) << 24); -+ *dp++ |= (((unsigned long) *bufbp++) << 8); -+ } -+ } -+ } else { -+ if (audio_device->bits == 16) { -+ for (i = 0; (i < slen); i += 4) { -+ *dp++ = (((unsigned long)*bufwp)<<16) | *bufwp; -+ bufwp++; -+ } -+ } else { -+ for (i = 0; (i < slen); i += 4) { -+ *dp++ = (((unsigned long) *bufbp) << 24) | -+ (((unsigned long) *bufbp) << 8); -+ bufbp++; -+ } -+ } -+ } -+ -+ e += slen; -+ if (e >= BUFSIZE) -+ e = 0; -+ audio_append = e; -+ -+ /* If not outputing audio, then start now */ -+ if (audio_txbusy == 0) { -+ audio_txbusy++; -+ audio_device->channel = 0; -+ enable_ssi(); -+#ifdef CONFIG_SSIAUDIO_USE_EDMA -+ ssi_audio_dmabuf(); /* start first DMA transfer */ -+#endif -+ } -+ -+ bufcnt -= slen; -+ -+ if (bufcnt > 0) -+ goto tryagain; -+ -+ spin_unlock(&(audio_device->lock)); -+ -+ return count; -+} -+ -+/* ioctl: control the driver */ -+static int ssi_audio_ioctl(struct inode *inode, struct file *filp, -+ unsigned int cmd, unsigned long arg) -+{ -+ long val; -+ int rc = 0; -+ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_ioctl(cmd=%x,arg=%x)\n", -+ (int)cmd, (int)arg); -+#endif -+ -+ if (audio_device==NULL) -+ return (-ENODEV); -+ -+ switch (cmd) { -+ -+ case SNDCTL_DSP_SPEED: -+ if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) { -+ get_user(val, (unsigned long *) arg); -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_ioctl: SNDCTL_DSP_SPEED: %ld\n", val); -+#endif -+ ssi_audio_txdrain(); -+ audio_device->speed = val; -+ init_audio_codec(); -+ } else { -+ rc = -EINVAL; -+ } -+ break; -+ -+ case SNDCTL_DSP_SAMPLESIZE: -+ if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) { -+ get_user(val, (unsigned long *) arg); -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME ":ssi_audio_ioctl: SNDCTL_DSP_SAMPLESIZE: %d\n", val); -+#endif -+ ssi_audio_txdrain(); -+ ssi_audio_setsamplesize(val); -+ } else { -+ rc = -EINVAL; -+ } -+ break; -+ -+ case SNDCTL_DSP_STEREO: -+ if (access_ok(VERIFY_READ, (void *) arg, sizeof(val))) { -+ get_user(val, (unsigned long *) arg); -+ ssi_audio_txdrain(); -+ audio_device->stereo = val; -+ } else { -+ rc = -EINVAL; -+ } -+ break; -+ -+ case SNDCTL_DSP_GETBLKSIZE: -+ if (access_ok(VERIFY_WRITE, (void *) arg, sizeof(long))) -+ put_user(BUFSIZE, (long *) arg); -+ else -+ rc = -EINVAL; -+ break; -+ -+ case SNDCTL_DSP_SYNC: -+ ssi_audio_txdrain(); -+ break; -+ -+ default: -+ rc = -EINVAL; -+ break; -+ } -+ -+ return rc; -+} -+ -+struct file_operations ssi_audio_fops = { -+ open: ssi_audio_open, /* open */ -+ release: ssi_audio_close, /* close */ -+ write: ssi_audio_write, /* write */ -+ ioctl: ssi_audio_ioctl, /* ioctl */ -+}; -+ -+/* initialize audio driver */ -+static int __devinit ssi_audio_probe(struct spi_device *spi) -+{ -+ struct ssi_audio *audio; -+ int err; -+ -+#ifdef AUDIO_DEBUG -+ printk(DRIVER_NAME": probe\n"); -+#endif -+ -+ if (!spi->irq) { -+ dev_dbg(&spi->dev, "no IRQ?\n"); -+ return -ENODEV; -+ } -+ -+ /* don't exceed max specified sample rate */ -+ if (spi->max_speed_hz > MAX_SPEED_HZ) { -+ dev_dbg(&spi->dev, "f(sample) %d KHz?\n", -+ (spi->max_speed_hz)/1000); -+ return -EINVAL; -+ } -+ -+ /* register charcter device */ -+ if (register_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME, &ssi_audio_fops) < 0) { -+ printk(KERN_WARNING DRIVER_NAME ": failed to register major %d\n", SOUND_MAJOR); -+ dev_dbg(&spi->dev, DRIVER_NAME ": failed to register major %d\n", SOUND_MAJOR); -+ return -ENODEV; -+ } -+ -+ audio = kzalloc(sizeof(struct ssi_audio), GFP_KERNEL); -+ if (!audio) { -+ err = -ENOMEM; -+ goto err_out; -+ } -+ -+ /* DMA buffer must be from GFP_DMA zone, so it will not be cached */ -+ audio->audio_buf = kmalloc(BUFSIZE, GFP_DMA); -+ if (audio->audio_buf == NULL) { -+ dev_dbg(&spi->dev, DRIVER_NAME ": failed to allocate DMA[%d] buffer\n", BUFSIZE); -+ err = -ENOMEM; -+ goto err_free_mem; -+ } -+ -+ audio_device = audio; -+ -+ dev_set_drvdata(&spi->dev, audio); -+ spi->dev.power.power_state = PMSG_ON; -+ -+ audio->spi = spi; -+ -+#ifndef CONFIG_SSIAUDIO_USE_EDMA -+ if (request_irq(spi->irq, ssi_audio_isr, IRQF_DISABLED, spi->dev.bus_id, audio)) { -+ dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); -+ err = -EBUSY; -+ goto err_free_mem; -+ } -+ -+#else -+ /* request 2 eDMA channels since two channel output mode is used */ -+ if (request_edma_channel(DMA_TCD, -+ ssi_audio_dma_handler_empty, -+ NULL, -+ audio, -+ &(audio_device->lock), -+ DRIVER_NAME)!=0) { -+ dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD); -+ err = -EBUSY; -+ goto err_free_mem; -+ } -+ if (request_edma_channel(DMA_TCD2, -+ ssi_audio_dma_handler, -+ NULL, -+ audio, -+ &(audio_device->lock), -+ DRIVER_NAME)!=0) { -+ dev_dbg(&spi->dev, "DMA channel %d busy?\n", DMA_TCD2); -+ err = -EBUSY; -+ goto err_free_mem; -+ } -+ -+#endif -+ chip_init(); -+ printk(DRIVER_NAME ": Probed successfully\n"); -+ -+ return 0; -+ -+ err_free_mem: -+ kfree(audio); -+ audio_device = NULL; -+ err_out: -+ unregister_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME); -+ return err; -+} -+ -+static int __devexit ssi_audio_remove(struct spi_device *spi) -+{ -+ struct ssi_audio *audio = dev_get_drvdata(&spi->dev); -+ -+ ssi_audio_txdrain(); -+#ifndef CONFIG_SSIAUDIO_USE_EDMA -+ free_irq(spi->irq, audio); -+#else -+ free_edma_channel(DMA_TCD, audio); -+ free_edma_channel(DMA_TCD2, audio); -+#endif -+ kfree(audio->audio_buf); -+ kfree(audio); -+ audio_device = NULL; -+ unregister_chrdev(SOUND_MAJOR, SOUND_DEVICE_NAME); -+ dev_dbg(&spi->dev, "unregistered audio\n"); -+ return 0; -+} -+ -+static int ssi_audio_suspend(struct spi_device *spi, pm_message_t message) -+{ -+ return 0; -+} -+ -+static int ssi_audio_resume(struct spi_device *spi) -+{ -+ return 0; -+} -+ -+static struct spi_driver ssi_audio_driver = { -+ .driver = { -+ .name = DRIVER_NAME, -+ .bus = &spi_bus_type, -+ .owner = THIS_MODULE, -+ }, -+ .probe = ssi_audio_probe, -+ .remove = __devexit_p(ssi_audio_remove), -+ .suspend = ssi_audio_suspend, -+ .resume = ssi_audio_resume, -+}; -+ -+static int __init ssi_audio_init(void) -+{ -+ return spi_register_driver(&ssi_audio_driver); -+} -+module_init(ssi_audio_init); -+ -+static void __exit ssi_audio_exit(void) -+{ -+ spi_unregister_driver(&ssi_audio_driver); -+} -+module_exit(ssi_audio_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Freescale Semiconductor, Inc."); -+MODULE_DESCRIPTION("SSI/I2S Audio Driver"); ---- a/drivers/usb/gadget/ether.c -+++ b/drivers/usb/gadget/ether.c -@@ -287,6 +287,9 @@ MODULE_PARM_DESC(host_addr, "Host Ethern - #define DEV_CONFIG_CDC - #endif - -+#ifdef CONFIG_USB_GADGET_MCF5445X -+#define DEV_CONFIG_CDC -+#endif - - /*-------------------------------------------------------------------------*/ - ---- a/drivers/usb/gadget/fsl_usb2_udc.h -+++ b/drivers/usb/gadget/fsl_usb2_udc.h -@@ -83,16 +83,6 @@ struct usb_dr_host { - u32 endptctrl[6]; /* Endpoint Control Registers */ - }; - -- /* non-EHCI USB system interface registers (Big Endian) */ --struct usb_sys_interface { -- u32 snoop1; -- u32 snoop2; -- u32 age_cnt_thresh; /* Age Count Threshold Register */ -- u32 pri_ctrl; /* Priority Control Register */ -- u32 si_ctrl; /* System Interface Control Register */ -- u8 res[236]; -- u32 control; /* General Purpose Control Register */ --}; - - /* ep0 transfer state */ - #define WAIT_FOR_SETUP 0 -@@ -101,10 +91,6 @@ struct usb_sys_interface { - #define WAIT_FOR_OUT_STATUS 3 - #define DATA_STATE_RECV 4 - --/* Device Controller Capability Parameter register */ --#define DCCPARAMS_DC 0x00000080 --#define DCCPARAMS_DEN_MASK 0x0000001f -- - /* Frame Index Register Bit Masks */ - #define USB_FRINDEX_MASKS 0x3fff - /* USB CMD Register Bit Masks */ -@@ -180,172 +166,6 @@ struct usb_sys_interface { - /* endpoint list address bit masks */ - #define USB_EP_LIST_ADDRESS_MASK 0xfffff800 - --/* PORTSCX Register Bit Masks */ --#define PORTSCX_CURRENT_CONNECT_STATUS 0x00000001 --#define PORTSCX_CONNECT_STATUS_CHANGE 0x00000002 --#define PORTSCX_PORT_ENABLE 0x00000004 --#define PORTSCX_PORT_EN_DIS_CHANGE 0x00000008 --#define PORTSCX_OVER_CURRENT_ACT 0x00000010 --#define PORTSCX_OVER_CURRENT_CHG 0x00000020 --#define PORTSCX_PORT_FORCE_RESUME 0x00000040 --#define PORTSCX_PORT_SUSPEND 0x00000080 --#define PORTSCX_PORT_RESET 0x00000100 --#define PORTSCX_LINE_STATUS_BITS 0x00000C00 --#define PORTSCX_PORT_POWER 0x00001000 --#define PORTSCX_PORT_INDICTOR_CTRL 0x0000C000 --#define PORTSCX_PORT_TEST_CTRL 0x000F0000 --#define PORTSCX_WAKE_ON_CONNECT_EN 0x00100000 --#define PORTSCX_WAKE_ON_CONNECT_DIS 0x00200000 --#define PORTSCX_WAKE_ON_OVER_CURRENT 0x00400000 --#define PORTSCX_PHY_LOW_POWER_SPD 0x00800000 --#define PORTSCX_PORT_FORCE_FULL_SPEED 0x01000000 --#define PORTSCX_PORT_SPEED_MASK 0x0C000000 --#define PORTSCX_PORT_WIDTH 0x10000000 --#define PORTSCX_PHY_TYPE_SEL 0xC0000000 -- --/* bit 11-10 are line status */ --#define PORTSCX_LINE_STATUS_SE0 0x00000000 --#define PORTSCX_LINE_STATUS_JSTATE 0x00000400 --#define PORTSCX_LINE_STATUS_KSTATE 0x00000800 --#define PORTSCX_LINE_STATUS_UNDEF 0x00000C00 --#define PORTSCX_LINE_STATUS_BIT_POS 10 -- --/* bit 15-14 are port indicator control */ --#define PORTSCX_PIC_OFF 0x00000000 --#define PORTSCX_PIC_AMBER 0x00004000 --#define PORTSCX_PIC_GREEN 0x00008000 --#define PORTSCX_PIC_UNDEF 0x0000C000 --#define PORTSCX_PIC_BIT_POS 14 -- --/* bit 19-16 are port test control */ --#define PORTSCX_PTC_DISABLE 0x00000000 --#define PORTSCX_PTC_JSTATE 0x00010000 --#define PORTSCX_PTC_KSTATE 0x00020000 --#define PORTSCX_PTC_SEQNAK 0x00030000 --#define PORTSCX_PTC_PACKET 0x00040000 --#define PORTSCX_PTC_FORCE_EN 0x00050000 --#define PORTSCX_PTC_BIT_POS 16 -- --/* bit 27-26 are port speed */ --#define PORTSCX_PORT_SPEED_FULL 0x00000000 --#define PORTSCX_PORT_SPEED_LOW 0x04000000 --#define PORTSCX_PORT_SPEED_HIGH 0x08000000 --#define PORTSCX_PORT_SPEED_UNDEF 0x0C000000 --#define PORTSCX_SPEED_BIT_POS 26 -- --/* bit 28 is parallel transceiver width for UTMI interface */ --#define PORTSCX_PTW 0x10000000 --#define PORTSCX_PTW_8BIT 0x00000000 --#define PORTSCX_PTW_16BIT 0x10000000 -- --/* bit 31-30 are port transceiver select */ --#define PORTSCX_PTS_UTMI 0x00000000 --#define PORTSCX_PTS_ULPI 0x80000000 --#define PORTSCX_PTS_FSLS 0xC0000000 --#define PORTSCX_PTS_BIT_POS 30 -- --/* otgsc Register Bit Masks */ --#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 --#define OTGSC_CTRL_VUSB_CHARGE 0x00000002 --#define OTGSC_CTRL_OTG_TERM 0x00000008 --#define OTGSC_CTRL_DATA_PULSING 0x00000010 --#define OTGSC_STS_USB_ID 0x00000100 --#define OTGSC_STS_A_VBUS_VALID 0x00000200 --#define OTGSC_STS_A_SESSION_VALID 0x00000400 --#define OTGSC_STS_B_SESSION_VALID 0x00000800 --#define OTGSC_STS_B_SESSION_END 0x00001000 --#define OTGSC_STS_1MS_TOGGLE 0x00002000 --#define OTGSC_STS_DATA_PULSING 0x00004000 --#define OTGSC_INTSTS_USB_ID 0x00010000 --#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 --#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 --#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 --#define OTGSC_INTSTS_B_SESSION_END 0x00100000 --#define OTGSC_INTSTS_1MS 0x00200000 --#define OTGSC_INTSTS_DATA_PULSING 0x00400000 --#define OTGSC_INTR_USB_ID 0x01000000 --#define OTGSC_INTR_A_VBUS_VALID 0x02000000 --#define OTGSC_INTR_A_SESSION_VALID 0x04000000 --#define OTGSC_INTR_B_SESSION_VALID 0x08000000 --#define OTGSC_INTR_B_SESSION_END 0x10000000 --#define OTGSC_INTR_1MS_TIMER 0x20000000 --#define OTGSC_INTR_DATA_PULSING 0x40000000 -- --/* USB MODE Register Bit Masks */ --#define USB_MODE_CTRL_MODE_IDLE 0x00000000 --#define USB_MODE_CTRL_MODE_DEVICE 0x00000002 --#define USB_MODE_CTRL_MODE_HOST 0x00000003 --#define USB_MODE_CTRL_MODE_RSV 0x00000001 --#define USB_MODE_SETUP_LOCK_OFF 0x00000008 --#define USB_MODE_STREAM_DISABLE 0x00000010 --/* Endpoint Flush Register */ --#define EPFLUSH_TX_OFFSET 0x00010000 --#define EPFLUSH_RX_OFFSET 0x00000000 -- --/* Endpoint Setup Status bit masks */ --#define EP_SETUP_STATUS_MASK 0x0000003F --#define EP_SETUP_STATUS_EP0 0x00000001 -- --/* ENDPOINTCTRLx Register Bit Masks */ --#define EPCTRL_TX_ENABLE 0x00800000 --#define EPCTRL_TX_DATA_TOGGLE_RST 0x00400000 /* Not EP0 */ --#define EPCTRL_TX_DATA_TOGGLE_INH 0x00200000 /* Not EP0 */ --#define EPCTRL_TX_TYPE 0x000C0000 --#define EPCTRL_TX_DATA_SOURCE 0x00020000 /* Not EP0 */ --#define EPCTRL_TX_EP_STALL 0x00010000 --#define EPCTRL_RX_ENABLE 0x00000080 --#define EPCTRL_RX_DATA_TOGGLE_RST 0x00000040 /* Not EP0 */ --#define EPCTRL_RX_DATA_TOGGLE_INH 0x00000020 /* Not EP0 */ --#define EPCTRL_RX_TYPE 0x0000000C --#define EPCTRL_RX_DATA_SINK 0x00000002 /* Not EP0 */ --#define EPCTRL_RX_EP_STALL 0x00000001 -- --/* bit 19-18 and 3-2 are endpoint type */ --#define EPCTRL_EP_TYPE_CONTROL 0 --#define EPCTRL_EP_TYPE_ISO 1 --#define EPCTRL_EP_TYPE_BULK 2 --#define EPCTRL_EP_TYPE_INTERRUPT 3 --#define EPCTRL_TX_EP_TYPE_SHIFT 18 --#define EPCTRL_RX_EP_TYPE_SHIFT 2 -- --/* SNOOPn Register Bit Masks */ --#define SNOOP_ADDRESS_MASK 0xFFFFF000 --#define SNOOP_SIZE_ZERO 0x00 /* snooping disable */ --#define SNOOP_SIZE_4KB 0x0B /* 4KB snoop size */ --#define SNOOP_SIZE_8KB 0x0C --#define SNOOP_SIZE_16KB 0x0D --#define SNOOP_SIZE_32KB 0x0E --#define SNOOP_SIZE_64KB 0x0F --#define SNOOP_SIZE_128KB 0x10 --#define SNOOP_SIZE_256KB 0x11 --#define SNOOP_SIZE_512KB 0x12 --#define SNOOP_SIZE_1MB 0x13 --#define SNOOP_SIZE_2MB 0x14 --#define SNOOP_SIZE_4MB 0x15 --#define SNOOP_SIZE_8MB 0x16 --#define SNOOP_SIZE_16MB 0x17 --#define SNOOP_SIZE_32MB 0x18 --#define SNOOP_SIZE_64MB 0x19 --#define SNOOP_SIZE_128MB 0x1A --#define SNOOP_SIZE_256MB 0x1B --#define SNOOP_SIZE_512MB 0x1C --#define SNOOP_SIZE_1GB 0x1D --#define SNOOP_SIZE_2GB 0x1E /* 2GB snoop size */ -- --/* pri_ctrl Register Bit Masks */ --#define PRI_CTRL_PRI_LVL1 0x0000000C --#define PRI_CTRL_PRI_LVL0 0x00000003 -- --/* si_ctrl Register Bit Masks */ --#define SI_CTRL_ERR_DISABLE 0x00000010 --#define SI_CTRL_IDRC_DISABLE 0x00000008 --#define SI_CTRL_RD_SAFE_EN 0x00000004 --#define SI_CTRL_RD_PREFETCH_DISABLE 0x00000002 --#define SI_CTRL_RD_PREFEFETCH_VAL 0x00000001 -- --/* control Register Bit Masks */ --#define USB_CTRL_IOENB 0x00000004 --#define USB_CTRL_ULPI_INT0EN 0x00000001 - - /* Endpoint Queue Head data struct - * Rem: all the variables of qh are LittleEndian Mode -@@ -477,7 +297,10 @@ struct fsl_udc { - unsigned int irq; - - struct usb_ctrlrequest local_setup_buff; -- spinlock_t lock; -+ spinlock_t lock; /* udc lock */ -+ struct fsl_usb2_platform_data *pdata; -+ u32 xcvr_type; -+ - struct otg_transceiver *transceiver; - unsigned softconnect:1; - unsigned vbus_active:1; -@@ -514,7 +337,7 @@ struct fsl_udc { - #define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \ - __FUNCTION__, ## args) - #else --#define DBG(fmt, args...) do{}while(0) -+#define DBG(fmt, args...) do {} while (0) - #endif - - #if 0 -@@ -548,7 +371,7 @@ static void dump_msg(const char *label, - #ifdef VERBOSE - #define VDBG DBG - #else --#define VDBG(stuff...) do{}while(0) -+#define VDBG(stuff...) do {} while (0) - #endif - - #define ERR(stuff...) pr_err("udc: " stuff) -@@ -573,11 +396,14 @@ static void dump_msg(const char *label, - #define ep_maxpacket(EP) ((EP)->ep.maxpacket) - #define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ - USB_DIR_IN ):((EP)->desc->bEndpointAddress \ -- & USB_DIR_IN)==USB_DIR_IN) -+ & USB_DIR_IN) == USB_DIR_IN) - #define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \ - &udc->eps[pipe]) - #define get_pipe_by_windex(windex) ((windex & USB_ENDPOINT_NUMBER_MASK) \ - * 2 + ((windex & USB_DIR_IN) ? 1 : 0)) - #define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP)) - -+/* Bulk only class request */ -+#define USB_BULK_RESET_REQUEST 0xff -+ - #endif ---- a/drivers/usb/gadget/gadget_chips.h -+++ b/drivers/usb/gadget/gadget_chips.h -@@ -147,6 +147,11 @@ - #define gadget_is_m66592(g) 0 - #endif - -+#ifdef CONFIG_USB_GADGET_MCF5445X -+#define gadget_is_mcf5445x(g) !strcmp("fsl-usb2-udc", (g)->name) -+#else -+#define gadget_is_mcf5445x(g) 0 -+#endif - - // CONFIG_USB_GADGET_SX2 - // CONFIG_USB_GADGET_AU1X00 -@@ -212,5 +217,7 @@ static inline int usb_gadget_controller_ - return 0x20; - else if (gadget_is_m66592(gadget)) - return 0x21; -+ else if (gadget_is_mcf5445x(gadget)) -+ return 0x22; - return -ENOENT; - } ---- a/drivers/usb/gadget/Kconfig -+++ b/drivers/usb/gadget/Kconfig -@@ -231,6 +231,26 @@ config SUPERH_BUILT_IN_M66592 - However, this problem is improved if change a value of - NET_IP_ALIGN to 4. - -+config USB_GADGET_MCF5445X -+ boolean "MCF5445X USB Device Controller" -+ depends on M54455 && USB_M5445X_ULPI -+ select USB_GADGET_DUALSPEED -+ help -+ Freescale's MCF5445X processors include -+ an integrated device controller (as part of the OTG module). -+ It has four programmable, bidirectional endpoints, -+ including endpoint 0. -+ -+ Say "y" to link the driver statically, or "m" to build a -+ dynamically linked module called "mcf5445_udc" and force all -+ gadget drivers to also be dynamically linked. -+ -+config USB_MCF5445X -+ tristate -+ depends on USB_GADGET_MCF5445X -+ default USB_GADGET -+ select USB_GADGET_SELECTED -+ - config USB_GADGET_GOKU - boolean "Toshiba TC86C001 'Goku-S'" - depends on PCI -@@ -285,17 +305,6 @@ config USB_OMAP - default USB_GADGET - select USB_GADGET_SELECTED - --config USB_OTG -- boolean "OTG Support" -- depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD -- help -- The most notable feature of USB OTG is support for a -- "Dual-Role" device, which can act as either a device -- or a host. The initial role choice can be changed -- later, when two dual-role devices talk to each other. -- -- Select this only if your OMAP board has a Mini-AB connector. -- - config USB_GADGET_S3C2410 - boolean "S3C2410 USB Device Controller" - depends on ARCH_S3C2410 -@@ -369,6 +378,18 @@ config USB_DUMMY_HCD - - endchoice - -+config USB_OTG -+ boolean "OTG Support" -+ depends on (USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD) || \ -+ (USB_GADGET_MCF5445X && USB_M5445X_ULPI) -+ help -+ The most notable feature of USB OTG is support for a -+ "Dual-Role" device, which can act as either a device -+ or a host. The initial role choice can be changed -+ later, when two dual-role devices talk to each other. -+ -+ Select this only if your OMAP board has a Mini-AB connector. -+ - config USB_GADGET_DUALSPEED - bool - depends on USB_GADGET ---- a/drivers/usb/gadget/Makefile -+++ b/drivers/usb/gadget/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_AT91) += at91_udc.o - obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o - obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o - obj-$(CONFIG_USB_M66592) += m66592-udc.o -+obj-$(CONFIG_USB_MCF5445X) += mcf5445x_udc.o - - # - # USB gadget drivers ---- /dev/null -+++ b/drivers/usb/gadget/mcf5445x_udc.c -@@ -0,0 +1,2745 @@ -+/* -+ * Copyright Freescale Semiconductor, Inc. 2006-2007 -+ * -+ * Based on mpc_udc.c code -+ * of Li Yang and Jiang Bo (Freescale Semiconductor, Inc.) -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.004 30 July 2007 Duck -+ * mcf5445x port -+ * v0.003 27 October 2006 Andrey Butok -+ * Added M5329EVB support (without external transceiver). -+ * v0.002 29 September 2006 Andrey Butok -+ * Some little changes. Added OTG support. -+ * v0.001 12 July 2006 Andrey Butok -+ * Initial Release - developed on uClinux with 2.6.17.1 kernel. -+ * Based on mpc_udc.c code -+ * of Li Yang and Jiang Bo (Freescale Semiconductor, Inc.) -+ * -+ */ -+ -+#undef DEBUG -+#undef VERBOSE -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/ioport.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/delay.h> -+#include <linux/sched.h> -+#include <linux/slab.h> -+#include <linux/init.h> -+#include <linux/io.h> -+#include <linux/irq.h> -+#include <linux/timer.h> -+#include <linux/list.h> -+#include <linux/interrupt.h> -+#include <linux/proc_fs.h> -+#include <linux/mm.h> -+#include <linux/platform_device.h> -+#include <linux/moduleparam.h> -+#include <linux/device.h> -+#include <linux/usb/ch9.h> -+#include <linux/usb/gadget.h> -+#include <linux/usb/otg.h> -+#include <linux/dma-mapping.h> -+#include <linux/dmapool.h> -+#include <linux/fsl_devices.h> -+#include <linux/usb/fsl_xcvr.h> -+#include <linux/usb/fsl_usb2.h> -+#include <linux/pm.h> -+ -+#include <asm/byteorder.h> -+#include <asm/system.h> -+#include <asm/unaligned.h> -+#include <asm/dma.h> -+ -+#include <asm/mcfsim.h> -+#include <asm/cacheflush.h> -+ -+#include "fsl_usb2_udc.h" -+ -+#define DRIVER_DESC "Freescale High-Speed USB SoC Device Controller driver" -+#define DRIVER_AUTHOR "Freescale Semiconductor Inc." -+#define DRIVER_VERSION "30 July 2007" -+ -+#define cpu_to_hc32(x) (x) -+#define hc32_to_cpu(x) (x) -+ -+static int udc_suspend(struct fsl_udc *udc); -+ -+#define DMA_ADDR_INVALID (~(dma_addr_t)0) -+ -+static const char driver_name[] = "fsl-usb2-udc"; -+static const char driver_desc[] = DRIVER_DESC; -+ -+volatile static struct fsl_usb_device_regs *dr_regs; -+volatile static struct usb_sys_interface *usb_sys_regs; -+ -+/* it is initialized in probe() */ -+static struct fsl_udc *udc_controller; -+ -+static const struct usb_endpoint_descriptor -+fsl_ep0_desc = { -+ .bLength = USB_DT_ENDPOINT_SIZE, -+ .bDescriptorType = USB_DT_ENDPOINT, -+ .bEndpointAddress = 0, -+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL, -+ .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, -+}; -+ -+static int fsl_udc_suspend(struct device *dev, pm_message_t state); -+static int fsl_udc_resume(struct device *dev); -+static void fsl_ep_fifo_flush(struct usb_ep *_ep); -+ -+/******************************************************************** -+ * Internal Used Function -+********************************************************************/ -+/*----------------------------------------------------------------- -+ * done() - retire a request; caller blocked irqs -+ * @status : request status to be set, only works when -+ * request is still in progress. -+ *--------------------------------------------------------------*/ -+static void done(struct fsl_ep *ep, struct fsl_req *req, int status) -+{ -+ struct fsl_udc *udc = NULL; -+ unsigned char stopped = ep->stopped; -+ -+ udc = (struct fsl_udc *)ep->udc; -+ -+ pr_debug("udc: req=0x%p\n", req); -+ if (req->head) { -+ pr_debug("udc: freeing head=0x%p\n", req->head); -+ dma_pool_free(udc->td_pool, req->head, req->head->td_dma); -+ } -+ -+ /* the req->queue pointer is used by ep_queue() func, in which -+ * the request will be added into a udc_ep->queue 'd tail -+ * so here the req will be dropped from the ep->queue -+ */ -+ list_del_init(&req->queue); -+ -+ /* req.status should be set as -EINPROGRESS in ep_queue() */ -+ if (req->req.status == -EINPROGRESS) -+ req->req.status = status; -+ else -+ status = req->req.status; -+ -+ pr_debug("udc: req=0x%p mapped=%x\n", req, req->mapped); -+ -+ if (req->mapped) { -+ pr_debug("udc: calling dma_unmap_single(buf,%s) req=0x%p " -+ "a=0x%x len=%d\n", -+ ep_is_in(ep) ? "to_dvc" : "from_dvc", -+ req, req->req.dma, req->req.length); -+ -+ dma_unmap_single(ep->udc->gadget.dev.parent, -+ req->req.dma, req->req.length, ep_is_in(ep) ? -+ DMA_TO_DEVICE : DMA_FROM_DEVICE); -+ -+ req->req.dma = DMA_ADDR_INVALID; -+ req->mapped = 0; -+ pr_debug("udc: req=0x%p set req.dma=0x%x\n", req, req->req.dma); -+ } else { -+ if ((req->req.length != 0) -+ && (req->req.dma != DMA_ADDR_INVALID)) { -+ pr_debug("udc: calling dma_sync_single_for_cpu(buf,%s) " -+ "req=0x%p dma=0x%x len=%d\n", -+ ep_is_in(ep) ? "to_dvc" : "from_dvc", req, -+ req->req.dma, req->req.length); -+ -+ dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, -+ req->req.dma, req->req.length, -+ ep_is_in(ep) ? DMA_TO_DEVICE : -+ DMA_FROM_DEVICE); -+ } -+ } -+ -+ if (status && (status != -ESHUTDOWN)) { -+ pr_debug("udc: complete %s req 0c%p stat %d len %u/%u\n", -+ ep->ep.name, &req->req, status, -+ req->req.actual, req->req.length); -+ } -+ -+ /* don't modify queue heads during completion callback */ -+ ep->stopped = 1; -+ -+ spin_unlock(&ep->udc->lock); -+ -+ /* this complete() should a func implemented by gadget layer, -+ * eg fsg->bulk_in_complete() */ -+ if (req->req.complete) { -+ pr_debug("udc: calling gadget's complete() req=0x%p\n", req); -+ req->req.complete(&ep->ep, &req->req); -+ pr_debug("udc: back from gadget's complete()\n"); -+ } -+ -+ spin_lock(&ep->udc->lock); -+ ep->stopped = stopped; -+} -+ -+/* -+ * nuke(): delete all requests related to this ep -+ * called with spinlock held -+ *--------------------------------------------------------------*/ -+static void nuke(struct fsl_ep *ep, int status) -+{ -+ ep->stopped = 1; -+ -+ /* Flush fifo */ -+ fsl_ep_fifo_flush(&ep->ep); -+ -+ /* Whether this eq has request linked */ -+ while (!list_empty(&ep->queue)) { -+ struct fsl_req *req = NULL; -+ -+ req = list_entry(ep->queue.next, struct fsl_req, queue); -+ done(ep, req, status); -+ } -+} -+ -+/*------------------------------------------------------------------ -+ Internal Hardware related function -+ ------------------------------------------------------------------*/ -+ -+static int dr_controller_setup(struct fsl_udc *udc) -+{ -+ unsigned int tmp; -+ unsigned int __attribute((unused)) ctrl = 0; -+ unsigned long timeout; -+ struct fsl_usb2_platform_data *pdata; -+ -+#define FSL_UDC_RESET_TIMEOUT 1000 -+ -+ /* before here, make sure dr_regs has been initialized */ -+ if (!udc) -+ return -EINVAL; -+ pdata = udc->pdata; -+ -+ /* Stop and reset the usb controller */ -+ tmp = fsl_readl(&dr_regs->usbcmd); -+ tmp &= ~USB_CMD_RUN_STOP; -+ fsl_writel(tmp, &dr_regs->usbcmd); -+ -+ tmp = fsl_readl(&dr_regs->usbcmd); -+ tmp |= USB_CMD_CTRL_RESET; -+ fsl_writel(tmp, &dr_regs->usbcmd); -+ -+ /* Wait for reset to complete */ -+ timeout = jiffies + FSL_UDC_RESET_TIMEOUT; -+ while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) { -+ if (time_after(jiffies, timeout)) { -+ ERR("udc reset timeout! \n"); -+ return -ETIMEDOUT; -+ } -+ cpu_relax(); -+ } -+ -+ tmp = fsl_readl(&dr_regs->usbmode); -+ tmp &= ~0x3; /* clear mode bits */ -+ tmp |= USB_MODE_CTRL_MODE_DEVICE; -+ /* Disable Setup Lockout */ -+ tmp |= USB_MODE_SETUP_LOCK_OFF; -+ if (pdata->es) -+ tmp |= USBMODE_ES; -+ fsl_writel(tmp, &dr_regs->usbmode); -+ -+ if (pdata->xcvr_ops && pdata->xcvr_ops->set_device) -+ pdata->xcvr_ops->set_device(); -+ -+ /* Clear the setup status */ -+ fsl_writel(0, &dr_regs->usbsts); -+ -+ tmp = udc->ep_qh_dma; -+ tmp &= USB_EP_LIST_ADDRESS_MASK; -+ fsl_writel(tmp, &dr_regs->endpointlistaddr); -+ -+ /* -+ VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", -+ (int)udc->ep_qh, (int)tmp, -+ fsl_readl(&dr_regs->endpointlistaddr)); -+ */ -+ -+ -+ if (pdata->have_sysif_regs) { -+ /* Config control enable i/o output, cpu endian register */ -+ ctrl = __raw_readl(&usb_sys_regs->control); -+ ctrl |= USB_CTRL_IOENB; -+ __raw_writel(ctrl, &usb_sys_regs->control); -+ } -+ -+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) -+ /* Turn on cache snooping hardware, since some PowerPC platforms -+ * wholly rely on hardware to deal with cache coherent. */ -+ -+ if (pdata->have_sysif_regs) { -+ /* Setup Snooping for all the 4GB space */ -+ tmp = SNOOP_SIZE_2GB; /* starts from 0x0, size 2G */ -+ __raw_writel(tmp, &usb_sys_regs->snoop1); -+ tmp |= 0x80000000; /* starts from 0x8000000, size 2G */ -+ __raw_writel(tmp, &usb_sys_regs->snoop2); -+ } -+#endif -+ -+ return 0; -+} -+ -+static void pullup_enable(struct fsl_udc *udc) -+{ -+ u32 temp; -+ -+ unsigned short ccm = fsl_readw(&MCF_CCM_UOCSR); -+ ccm |= MCF_CCM_UOCSR_BVLD; -+ ccm &= ~MCF_CCM_UOCSR_SEND; -+ fsl_writew(ccm, &MCF_CCM_UOCSR); -+ -+ /* Enable DR irq reg */ -+ temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN -+ | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN -+ | USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN; -+ -+ fsl_writel(temp, &dr_regs->usbintr); -+ -+ /* Set controller to Run */ -+ temp = fsl_readl(&dr_regs->usbcmd); -+ temp |= USB_CMD_RUN_STOP; -+ fsl_writel(temp, &dr_regs->usbcmd); -+} -+ -+static void pullup_disable(struct fsl_udc *udc) -+{ -+ unsigned int tmp; -+ unsigned short ccm; -+ -+ VDBG(); -+ /* disable all INTRs */ -+ fsl_writel(0, &dr_regs->usbintr); -+ -+ ccm = fsl_readw(&MCF_CCM_UOCSR); -+ ccm &= ~MCF_CCM_UOCSR_BVLD; -+ fsl_writew(ccm, &MCF_CCM_UOCSR); -+ -+ /* set controller to Stop */ -+ tmp = fsl_readl(&dr_regs->usbcmd); -+ tmp &= ~USB_CMD_RUN_STOP; -+ fsl_writel(tmp, &dr_regs->usbcmd); -+} -+ -+static void dr_controller_run(struct fsl_udc *udc) -+{ -+ VDBG(); -+ pullup_enable(udc); -+ udc->stopped = 0; -+} -+ -+static void dr_controller_stop(struct fsl_udc *udc) -+{ -+ pullup_disable(udc); -+ udc->stopped = 1; -+ udc->gadget.b_hnp_enable = 0; -+ udc->gadget.a_hnp_support = 0; -+ udc->gadget.a_alt_hnp_support = 0; -+} -+ -+void dr_ep_setup(unsigned char ep_num, unsigned char dir, unsigned char ep_type) -+{ -+ unsigned int tmp_epctrl = 0; -+ -+ tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); -+ if (dir) { -+ if (ep_num) -+ tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; -+ tmp_epctrl |= EPCTRL_TX_ENABLE; -+ tmp_epctrl |= ((unsigned int)(ep_type) -+ << EPCTRL_TX_EP_TYPE_SHIFT); -+ } else { -+ if (ep_num) -+ tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; -+ tmp_epctrl |= EPCTRL_RX_ENABLE; -+ tmp_epctrl |= ((unsigned int)(ep_type) -+ << EPCTRL_RX_EP_TYPE_SHIFT); -+ } -+ -+ fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); -+} -+ -+static void dr_ep_change_stall(unsigned char ep_num, unsigned char dir, -+ int value) -+{ -+ u32 tmp_epctrl = 0; -+ -+ tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); -+ -+ if (value) { -+ /* set the stall bit */ -+ if (dir) -+ tmp_epctrl |= EPCTRL_TX_EP_STALL; -+ else -+ tmp_epctrl |= EPCTRL_RX_EP_STALL; -+ } else { -+ /* clear the stall bit and reset data toggle */ -+ if (dir) { -+ tmp_epctrl &= ~EPCTRL_TX_EP_STALL; -+ tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; -+ } else { -+ tmp_epctrl &= ~EPCTRL_RX_EP_STALL; -+ tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; -+ } -+ } -+ fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); -+} -+ -+/* Get stall status of a specific ep -+ Return: 0: not stalled; 1:stalled */ -+static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir) -+{ -+ u32 epctrl; -+ -+ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); -+ if (dir) -+ return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0; -+ else -+ return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0; -+} -+ -+/******************************************************************** -+ Internal Structure Build up functions -+********************************************************************/ -+ -+/*------------------------------------------------------------------ -+* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH -+ * @zlt: Zero Length Termination Select (1: disable; 0: enable) -+ * @mult: Mult field -+ ------------------------------------------------------------------*/ -+static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, -+ unsigned char dir, unsigned char ep_type, -+ unsigned int max_pkt_len, -+ unsigned int zlt, unsigned char mult) -+{ -+ struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir]; -+ unsigned int tmp = 0; -+ -+ /* set the Endpoint Capabilites in QH */ -+ switch (ep_type) { -+ case USB_ENDPOINT_XFER_CONTROL: -+ /* Interrupt On Setup (IOS). for control ep */ -+ tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) -+ | EP_QUEUE_HEAD_IOS; -+ break; -+ case USB_ENDPOINT_XFER_ISOC: -+ tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) -+ | (mult << EP_QUEUE_HEAD_MULT_POS); -+ break; -+ case USB_ENDPOINT_XFER_BULK: -+ case USB_ENDPOINT_XFER_INT: -+ tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS; -+ break; -+ default: -+ VDBG("error ep type is %d", ep_type); -+ return; -+ } -+ if (zlt) -+ tmp |= EP_QUEUE_HEAD_ZLT_SEL; -+ p_QH->max_pkt_length = cpu_to_hc32(tmp); -+ -+ return; -+} -+ -+/* Setup qh structure and ep register for ep0. */ -+static void ep0_setup(struct fsl_udc *udc) -+{ -+ /* the intialization of an ep includes: fields in QH, Regs, -+ * fsl_ep struct */ -+ struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL, -+ USB_MAX_CTRL_PAYLOAD, 0, 0); -+ struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL, -+ USB_MAX_CTRL_PAYLOAD, 0, 0); -+ dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL); -+ dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL); -+ -+ return; -+ -+} -+ -+/*********************************************************************** -+ Endpoint Management Functions -+***********************************************************************/ -+ -+/*------------------------------------------------------------------------- -+ * when configurations are set, or when interface settings change -+ * for example the do_set_interface() in gadget layer, -+ * the driver will enable or disable the relevant endpoints -+ * ep0 doesn't use this routine. It is always enabled. -+-------------------------------------------------------------------------*/ -+static int fsl_ep_enable(struct usb_ep *_ep, -+ const struct usb_endpoint_descriptor *desc) -+{ -+ struct fsl_udc *udc = NULL; -+ struct fsl_ep *ep = NULL; -+ unsigned short max = 0; -+ unsigned char mult = 0, zlt; -+ int retval = -EINVAL; -+ unsigned long flags = 0; -+ -+ ep = container_of(_ep, struct fsl_ep, ep); -+ -+ /* catch various bogus parameters */ -+ if (!_ep || !desc || ep->desc -+ || (desc->bDescriptorType != USB_DT_ENDPOINT)) -+ return -EINVAL; -+ -+ udc = ep->udc; -+ -+ if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) -+ return -ESHUTDOWN; -+ -+ max = le16_to_cpu(desc->wMaxPacketSize); -+ -+ /* Disable automatic zlp generation. Driver is reponsible to indicate -+ * explicitly through req->req.zero. This is needed to enable multi-td -+ * request. */ -+ zlt = 1; -+ -+ /* Assume the max packet size from gadget is always correct */ -+ switch (desc->bmAttributes & 0x03) { -+ case USB_ENDPOINT_XFER_CONTROL: -+ case USB_ENDPOINT_XFER_BULK: -+ case USB_ENDPOINT_XFER_INT: -+ /* mult = 0. Execute N Transactions as demonstrated by -+ * the USB variable length packet protocol where N is -+ * computed using the Maximum Packet Length (dQH) and -+ * the Total Bytes field (dTD) */ -+ mult = 0; -+ break; -+ case USB_ENDPOINT_XFER_ISOC: -+ /* Calculate transactions needed for high bandwidth iso */ -+ mult = (unsigned char)(1 + ((max >> 11) & 0x03)); -+ max = max & 0x8ff; /* bit 0~10 */ -+ /* 3 transactions at most */ -+ if (mult > 3) -+ goto en_done; -+ break; -+ default: -+ goto en_done; -+ } -+ -+ spin_lock_irqsave(&udc->lock, flags); -+ ep->ep.maxpacket = max; -+ ep->desc = desc; -+ ep->stopped = 0; -+ -+ /* Controller related setup */ -+ /* Init EPx Queue Head (Ep Capabilites field in QH -+ * according to max, zlt, mult) */ -+ struct_ep_qh_setup(udc, (unsigned char) ep_index(ep), -+ (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) -+ ? USB_SEND : USB_RECV), -+ (unsigned char) (desc->bmAttributes -+ & USB_ENDPOINT_XFERTYPE_MASK), -+ max, zlt, mult); -+ -+ /* Init endpoint ctrl register */ -+ dr_ep_setup((unsigned char) ep_index(ep), -+ (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) -+ ? USB_SEND : USB_RECV), -+ (unsigned char) (desc->bmAttributes -+ & USB_ENDPOINT_XFERTYPE_MASK)); -+ -+ spin_unlock_irqrestore(&udc->lock, flags); -+ retval = 0; -+ -+ VDBG("enabled %s (ep%d%s) maxpacket %d", ep->ep.name, -+ ep->desc->bEndpointAddress & 0x0f, -+ (desc->bEndpointAddress & USB_DIR_IN) -+ ? "in" : "out", max); -+en_done: -+ return retval; -+} -+ -+/*--------------------------------------------------------------------- -+ * @ep : the ep being unconfigured. May not be ep0 -+ * Any pending and uncomplete req will complete with status (-ESHUTDOWN) -+*---------------------------------------------------------------------*/ -+static int fsl_ep_disable(struct usb_ep *_ep) -+{ -+ struct fsl_udc *udc = NULL; -+ struct fsl_ep *ep = NULL; -+ unsigned long flags = 0; -+ u32 epctrl; -+ int ep_num; -+ -+ ep = container_of(_ep, struct fsl_ep, ep); -+ if (!_ep || !ep->desc) { -+ pr_debug("udc: %s not enabled\n", _ep ? ep->ep.name : NULL); -+ return -EINVAL; -+ } -+ -+ /* disable ep on controller */ -+ ep_num = ep_index(ep); -+ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); -+ if (ep_is_in(ep)) -+ epctrl &= ~EPCTRL_TX_ENABLE; -+ else -+ epctrl &= ~EPCTRL_RX_ENABLE; -+ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); -+ -+ udc = (struct fsl_udc *)ep->udc; -+ spin_lock_irqsave(&udc->lock, flags); -+ -+ /* nuke all pending requests (does flush) */ -+ nuke(ep, -ESHUTDOWN); -+ -+ ep->desc = 0; -+ ep->stopped = 1; -+ spin_unlock_irqrestore(&udc->lock, flags); -+ -+ pr_debug("udc: disabled %s OK\n", _ep->name); -+ return 0; -+} -+ -+/*--------------------------------------------------------------------- -+ * allocate a request object used by this endpoint -+ * the main operation is to insert the req->queue to the eq->queue -+ * Returns the request, or null if one could not be allocated -+*---------------------------------------------------------------------*/ -+static struct usb_request * -+fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) -+{ -+ struct fsl_req *req = NULL; -+ -+ req = kzalloc(sizeof *req, gfp_flags); -+ if (!req) -+ return NULL; -+ -+ req->req.dma = DMA_ADDR_INVALID; -+ pr_debug("udc: req=0x%p set req.dma=0x%x\n", req, req->req.dma); -+ INIT_LIST_HEAD(&req->queue); -+ -+ return &req->req; -+} -+ -+static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req) -+{ -+ struct fsl_req *req; -+ -+ req = container_of(_req, struct fsl_req, req); -+ pr_debug("udc: req=0x%p\n", req); -+ -+ if (_req) -+ kfree(req); -+} -+ -+/*-------------------------------------------------------------------------*/ -+static int fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) -+{ -+ int i = ep_index(ep) * 2 + ep_is_in(ep); -+ u32 temp, bitmask, tmp_stat; -+ struct ep_queue_head *dQH = &ep->udc->ep_qh[i]; -+ -+ pr_debug("udc: queue req=0x%p to ep index %d\n", req, i); -+ -+ bitmask = ep_is_in(ep) -+ ? (1 << (ep_index(ep) + 16)) -+ : (1 << (ep_index(ep))); -+ -+ /* check if the pipe is empty */ -+ if (!(list_empty(&ep->queue))) { -+ /* Add td to the end */ -+ struct fsl_req *lastreq; -+ lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); -+ lastreq->tail->next_td_ptr = -+ cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK); -+ /* Read prime bit, if 1 goto done */ -+ if (fsl_readl(&dr_regs->endpointprime) & bitmask) -+ goto out; -+ -+ do { -+ /* Set ATDTW bit in USBCMD */ -+ temp = fsl_readl(&dr_regs->usbcmd); -+ fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd); -+ -+ /* Read correct status bit */ -+ tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask; -+ -+ } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW)); -+ -+ /* Write ATDTW bit to 0 */ -+ temp = fsl_readl(&dr_regs->usbcmd); -+ fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd); -+ -+ if (tmp_stat) -+ goto out; -+ } -+ -+ /* Write dQH next pointer and terminate bit to 0 */ -+ temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; -+ dQH->next_dtd_ptr = cpu_to_hc32(temp); -+ -+ /* Clear active and halt bit */ -+ temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE -+ | EP_QUEUE_HEAD_STATUS_HALT)); -+ dQH->size_ioc_int_sts &= temp; -+ -+ /* Prime endpoint by writing 1 to ENDPTPRIME */ -+ temp = ep_is_in(ep) -+ ? (1 << (ep_index(ep) + 16)) -+ : (1 << (ep_index(ep))); -+ fsl_writel(temp, &dr_regs->endpointprime); -+out: -+ return 0; -+} -+ -+/* Fill in the dTD structure -+ * @req: request that the transfer belongs to -+ * @length: return actually data length of the dTD -+ * @dma: return dma address of the dTD -+ * @is_last: return flag if it is the last dTD of the request -+ * return: pointer to the built dTD */ -+static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, -+ dma_addr_t *dma, int *is_last) -+{ -+ u32 swap_temp; -+ struct ep_td_struct *dtd; -+ -+ /* how big will this transfer be? */ -+ *length = min(req->req.length - req->req.actual, -+ (unsigned)EP_MAX_LENGTH_TRANSFER); -+ -+ dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma); -+ if (dtd == NULL) -+ return dtd; -+ -+ dtd->td_dma = *dma; -+ /* Clear reserved field */ -+ swap_temp = hc32_to_cpu(dtd->size_ioc_sts); -+ swap_temp &= ~DTD_RESERVED_FIELDS; -+ dtd->size_ioc_sts = cpu_to_hc32(swap_temp); -+ -+ /* Init all of buffer page pointers */ -+ swap_temp = (u32) (req->req.dma + req->req.actual); -+ dtd->buff_ptr0 = cpu_to_hc32(swap_temp); -+ dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000); -+ dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000); -+ dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000); -+ dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000); -+ -+ req->req.actual += *length; -+ -+ /* zlp is needed if req->req.zero is set */ -+ if (req->req.zero) { -+ if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) -+ *is_last = 1; -+ else -+ *is_last = 0; -+ } else if (req->req.length == req->req.actual) -+ *is_last = 1; -+ else -+ *is_last = 0; -+ -+ if ((*is_last) == 0) -+ VDBG("multi-dtd request!\n"); -+ /* Fill in the transfer size; set active bit */ -+ swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE); -+ -+ /* Enable interrupt for the last dtd of a request */ -+ if (*is_last && !req->req.no_interrupt) -+ swap_temp |= DTD_IOC; -+ -+ dtd->size_ioc_sts = cpu_to_hc32(swap_temp); -+ -+ mb(); -+ -+ VDBG("length = %d address= 0x%x", *length, (int)*dma); -+ -+ return dtd; -+} -+ -+/* Generate dtd chain for a request */ -+static int fsl_req_to_dtd(struct fsl_req *req) -+{ -+ unsigned count; -+ int is_last; -+ int is_first = 1; -+ struct ep_td_struct *last_dtd = NULL, *dtd; -+ dma_addr_t dma; -+ -+ do { -+ dtd = fsl_build_dtd(req, &count, &dma, &is_last); -+ if (dtd == NULL) -+ return -ENOMEM; -+ -+ if (is_first) { -+ is_first = 0; -+ req->head = dtd; -+ } else { -+ last_dtd->next_td_ptr = hc32_to_cpu(dma); -+ last_dtd->next_td_virt = dtd; -+ } -+ last_dtd = dtd; -+ -+ req->dtd_count++; -+ } while (!is_last); -+ -+ dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE); -+ -+ req->tail = dtd; -+ -+ return 0; -+} -+ -+/* queues (submits) an I/O request to an endpoint */ -+static int -+fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) -+{ -+ struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); -+ struct fsl_req *req = container_of(_req, struct fsl_req, req); -+ struct fsl_udc *udc; -+ unsigned long flags; -+ int is_iso = 0; -+ -+ /* catch various bogus parameters */ -+ if (!_req || !req->req.complete || !req->req.buf -+ || !list_empty(&req->queue)) { -+ VDBG("%s, bad params\n", __FUNCTION__); -+ return -EINVAL; -+ } -+ if (!_ep || (!ep->desc && ep_index(ep))) { -+ VDBG("%s, bad ep\n", __FUNCTION__); -+ return -EINVAL; -+ } -+ if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { -+ if (req->req.length > ep->ep.maxpacket) -+ return -EMSGSIZE; -+ is_iso = 1; -+ } -+ -+ udc = ep->udc; -+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) -+ return -ESHUTDOWN; -+ -+ req->ep = ep; -+ -+ /* map virtual address to hardware */ -+ if (req->req.dma == DMA_ADDR_INVALID) { -+ req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, -+ req->req.buf, -+ req->req.length, ep_is_in(ep) -+ ? DMA_TO_DEVICE -+ : DMA_FROM_DEVICE); -+ req->mapped = 1; -+ } else { -+ dma_sync_single_for_device(ep->udc->gadget.dev.parent, -+ req->req.dma, req->req.length, -+ ep_is_in(ep) -+ ? DMA_TO_DEVICE -+ : DMA_FROM_DEVICE); -+ req->mapped = 0; -+ } -+ -+ req->req.status = -EINPROGRESS; -+ req->req.actual = 0; -+ req->dtd_count = 0; -+ -+ spin_lock_irqsave(&udc->lock, flags); -+ -+ /* build dtds and push them to device queue */ -+ if (!fsl_req_to_dtd(req)) { -+ fsl_queue_td(ep, req); -+ } else { -+ spin_unlock_irqrestore(&udc->lock, flags); -+ return -ENOMEM; -+ } -+ -+ /* Update ep0 state */ -+ if ((ep_index(ep) == 0)) -+ udc->ep0_state = DATA_STATE_XMIT; -+ -+ /* irq handler advances the queue */ -+ if (req != NULL) -+ list_add_tail(&req->queue, &ep->queue); -+ spin_unlock_irqrestore(&udc->lock, flags); -+ -+ return 0; -+} -+ -+/* dequeues (cancels, unlinks) an I/O request from an endpoint */ -+static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) -+{ -+ struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); -+ struct fsl_req *req; -+ unsigned long flags; -+ int ep_num, stopped, ret = 0; -+ u32 epctrl; -+ -+ if (!_ep || !_req) -+ return -EINVAL; -+ -+ spin_lock_irqsave(&ep->udc->lock, flags); -+ stopped = ep->stopped; -+ -+ /* Stop the ep before we deal with the queue */ -+ ep->stopped = 1; -+ ep_num = ep_index(ep); -+ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); -+ if (ep_is_in(ep)) -+ epctrl &= ~EPCTRL_TX_ENABLE; -+ else -+ epctrl &= ~EPCTRL_RX_ENABLE; -+ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); -+ -+ /* make sure it's actually queued on this endpoint */ -+ list_for_each_entry(req, &ep->queue, queue) { -+ if (&req->req == _req) -+ break; -+ } -+ if (&req->req != _req) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ /* The request is in progress, or completed but not dequeued */ -+ if (ep->queue.next == &req->queue) { -+ _req->status = -ECONNRESET; -+ fsl_ep_fifo_flush(_ep); /* flush current transfer */ -+ -+ /* The request isn't the last request in this ep queue */ -+ if (req->queue.next != &ep->queue) { -+ struct ep_queue_head *qh; -+ struct fsl_req *next_req; -+ -+ qh = ep->qh; -+ next_req = list_entry(req->queue.next, struct fsl_req, -+ queue); -+ -+ /* Point the QH to the first TD of next request */ -+ fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr); -+ } -+ -+ /* The request hasn't been processed, patch up the TD chain */ -+ } else { -+ struct fsl_req *prev_req; -+ -+ prev_req = list_entry(req->queue.prev, struct fsl_req, queue); -+ fsl_writel(fsl_readl(&req->tail->next_td_ptr), -+ &prev_req->tail->next_td_ptr); -+ -+ } -+ -+ done(ep, req, -ECONNRESET); -+ -+ /* Enable EP */ -+out: epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); -+ if (ep_is_in(ep)) -+ epctrl |= EPCTRL_TX_ENABLE; -+ else -+ epctrl |= EPCTRL_RX_ENABLE; -+ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); -+ ep->stopped = stopped; -+ -+ spin_unlock_irqrestore(&ep->udc->lock, flags); -+ return ret; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+/*----------------------------------------------------------------- -+ * modify the endpoint halt feature -+ * @ep: the non-isochronous endpoint being stalled -+ * @value: 1--set halt 0--clear halt -+ * Returns zero, or a negative error code. -+*----------------------------------------------------------------*/ -+static int fsl_ep_set_halt(struct usb_ep *_ep, int value) -+{ -+ struct fsl_ep *ep = NULL; -+ unsigned long flags = 0; -+ int status = -EOPNOTSUPP; /* operation not supported */ -+ unsigned char ep_dir = 0, ep_num = 0; -+ struct fsl_udc *udc = NULL; -+ -+ ep = container_of(_ep, struct fsl_ep, ep); -+ udc = ep->udc; -+ if (!_ep || !ep->desc) { -+ status = -EINVAL; -+ goto out; -+ } -+ -+ if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { -+ status = -EOPNOTSUPP; -+ goto out; -+ } -+ -+ /* Attempt to halt IN ep will fail if any transfer requests -+ * are still queue */ -+ if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { -+ status = -EAGAIN; -+ goto out; -+ } -+ -+ status = 0; -+ ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; -+ ep_num = (unsigned char)(ep_index(ep)); -+ spin_lock_irqsave(&ep->udc->lock, flags); -+ dr_ep_change_stall(ep_num, ep_dir, value); -+ spin_unlock_irqrestore(&ep->udc->lock, flags); -+ -+ if (ep_index(ep) == 0) { -+ udc->ep0_state = WAIT_FOR_SETUP; -+ udc->ep0_dir = 0; -+ } -+out: -+ VDBG(" %s %s halt stat %d", ep->ep.name, -+ value ? "set" : "clear", status); -+ -+ return status; -+} -+ -+static void fsl_ep_fifo_flush(struct usb_ep *_ep) -+{ -+ struct fsl_ep *ep; -+ int ep_num, ep_dir; -+ u32 bits; -+ unsigned long timeout; -+#define FSL_UDC_FLUSH_TIMEOUT 1000 -+ -+ if (!_ep) { -+ return; -+ } else { -+ ep = container_of(_ep, struct fsl_ep, ep); -+ if (!ep->desc) -+ return; -+ } -+ ep_num = ep_index(ep); -+ ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; -+ -+ if (ep_num == 0) -+ bits = (1 << 16) | 1; -+ else if (ep_dir == USB_SEND) -+ bits = 1 << (16 + ep_num); -+ else -+ bits = 1 << ep_num; -+ -+ timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT; -+ do { -+ fsl_writel(bits, &dr_regs->endptflush); -+ -+ /* Wait until flush complete */ -+ while (fsl_readl(&dr_regs->endptflush)) { -+ if (time_after(jiffies, timeout)) { -+ ERR("ep flush timeout\n"); -+ return; -+ } -+ cpu_relax(); -+ } -+ /* See if we need to flush again */ -+ } while (fsl_readl(&dr_regs->endptstatus) & bits); -+} -+ -+static struct usb_ep_ops fsl_ep_ops = { -+ .enable = fsl_ep_enable, -+ .disable = fsl_ep_disable, -+ -+ .alloc_request = fsl_alloc_request, -+ .free_request = fsl_free_request, -+ -+ .queue = fsl_ep_queue, -+ .dequeue = fsl_ep_dequeue, -+ -+ .set_halt = fsl_ep_set_halt, -+ .fifo_flush = fsl_ep_fifo_flush, /* flush fifo */ -+}; -+ -+/*------------------------------------------------------------------------- -+ Gadget Driver Layer Operations -+-------------------------------------------------------------------------*/ -+ -+/*---------------------------------------------------------------------- -+ * Get the current frame number (from DR frame_index Reg ) -+ *----------------------------------------------------------------------*/ -+static int fsl_get_frame(struct usb_gadget *gadget) -+{ -+ return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS); -+} -+ -+/*----------------------------------------------------------------------- -+ * Tries to wake up the host connected to this gadget -+ -----------------------------------------------------------------------*/ -+static int fsl_wakeup(struct usb_gadget *gadget) -+{ -+ struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget); -+ u32 portsc; -+ -+ /* Remote wakeup feature not enabled by host */ -+ if (!udc->remote_wakeup) -+ return -ENOTSUPP; -+ -+ portsc = fsl_readl(&dr_regs->portsc1); -+ /* not suspended? */ -+ if (!(portsc & PORTSCX_PORT_SUSPEND)) -+ return 0; -+ /* trigger force resume */ -+ portsc |= PORTSCX_PORT_FORCE_RESUME; -+ fsl_writel(portsc, &dr_regs->portsc1); -+ return 0; -+} -+ -+static int can_pullup(struct fsl_udc *udc) -+{ -+ return udc->driver && udc->softconnect && udc->vbus_active; -+} -+ -+/* -+ * Notify controller that VBUS is powered, Called by whatever -+ * detects VBUS sessions -+ * @param gadger gadger pointer -+ * @param is_active is active? -+ * @return Returns zero on success , or a negative error code -+ */ -+static int fsl_vbus_session(struct usb_gadget *gadget, int is_active) -+{ -+ struct fsl_udc *udc; -+ unsigned long flags; -+ -+ udc = container_of(gadget, struct fsl_udc, gadget); -+ spin_lock_irqsave(&udc->lock, flags); -+ -+ pr_debug("udc: VBUS %s\n", is_active ? "on" : "off"); -+ udc->vbus_active = (is_active != 0); -+ -+ if (can_pullup(udc)) { -+ pullup_enable(udc); -+ udc_controller->usb_state = USB_STATE_ATTACHED; -+ } else { -+ pullup_disable(udc); -+ udc_controller->usb_state = USB_STATE_NOTATTACHED; -+ } -+ udc_controller->ep0_state = WAIT_FOR_SETUP; -+ udc_controller->ep0_dir = 0; -+ -+ spin_unlock_irqrestore(&udc->lock, flags); -+ return 0; -+} -+ -+/* constrain controller's VBUS power usage -+ * This call is used by gadget drivers during SET_CONFIGURATION calls, -+ * reporting how much power the device may consume. For example, this -+ * could affect how quickly batteries are recharged. -+ * -+ * Returns zero on success, else negative errno. -+ */ -+static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) -+{ -+#ifdef CONFIG_USB_OTG -+ struct fsl_udc *udc; -+ -+ udc = container_of(gadget, struct fsl_udc, gadget); -+ -+ if (udc->transceiver) -+ return otg_set_power(udc->transceiver, mA); -+#endif -+ return -ENOTSUPP; -+} -+ -+/* -+ * Change Data+ pullup status -+ * this func is used by usb_gadget_connect/disconnet -+ */ -+static int fsl_pullup(struct usb_gadget *gadget, int is_on) -+{ -+ struct fsl_udc *udc; -+ -+ udc = container_of(gadget, struct fsl_udc, gadget); -+ udc->softconnect = (is_on != 0); -+ if (can_pullup(udc)) -+ fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), -+ &dr_regs->usbcmd); -+ else -+ fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP), -+ &dr_regs->usbcmd); -+ -+ return 0; -+} -+ -+/* defined in usb_gadget.h */ -+static struct usb_gadget_ops fsl_gadget_ops = { -+ .get_frame = fsl_get_frame, -+ .wakeup = fsl_wakeup, -+ .vbus_session = fsl_vbus_session, -+ .vbus_draw = fsl_vbus_draw, -+ .pullup = fsl_pullup, -+}; -+ -+/* Set protocol stall on ep0, protocol stall will automatically be cleared -+ on new transaction */ -+static void ep0stall(struct fsl_udc *udc) -+{ -+ u32 tmp; -+ -+ /* must set tx and rx to stall at the same time */ -+ tmp = fsl_readl(&dr_regs->endptctrl[0]); -+ tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL; -+ fsl_writel(tmp, &dr_regs->endptctrl[0]); -+ udc->ep0_state = WAIT_FOR_SETUP; -+ udc->ep0_dir = 0; -+} -+ -+/* Prime a status phase for ep0 */ -+static int ep0_prime_status(struct fsl_udc *udc, int direction) -+{ -+ struct fsl_req *req = udc->status_req; -+ struct fsl_ep *ep; -+ int status = 0; -+ -+ if (direction == EP_DIR_IN) -+ udc->ep0_dir = USB_DIR_IN; -+ else -+ udc->ep0_dir = USB_DIR_OUT; -+ -+ ep = &udc->eps[0]; -+ udc->ep0_state = WAIT_FOR_OUT_STATUS; -+ -+ req->ep = ep; -+ req->req.length = 0; -+ req->req.status = -EINPROGRESS; -+ req->req.actual = 0; -+ req->req.complete = NULL; -+ req->dtd_count = 0; -+ -+ if (fsl_req_to_dtd(req) == 0) -+ status = fsl_queue_td(ep, req); -+ else -+ return -ENOMEM; -+ -+ if (status) -+ ERR("Can't queue ep0 status request \n"); -+ list_add_tail(&req->queue, &ep->queue); -+ -+ return status; -+} -+ -+static inline int udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe) -+{ -+ struct fsl_ep *ep = get_ep_by_pipe(udc, pipe); -+ -+ if (!ep->name) -+ return 0; -+ -+ nuke(ep, -ESHUTDOWN); -+ -+ return 0; -+} -+ -+/* -+ * ch9 Set address -+ */ -+static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length) -+{ -+ /* Save the new address to device struct */ -+ udc->device_address = (u8) value; -+ /* Update usb state */ -+ udc->usb_state = USB_STATE_ADDRESS; -+ /* Status phase */ -+ if (ep0_prime_status(udc, EP_DIR_IN)) -+ ep0stall(udc); -+} -+ -+/* -+ * ch9 Get status -+ */ -+static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, -+ u16 index, u16 length) -+{ -+ u16 tmp = 0; /* Status, cpu endian */ -+ -+ struct fsl_req *req; -+ struct fsl_ep *ep; -+ int status = 0; -+ -+ ep = &udc->eps[0]; -+ -+ if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { -+ /* Get device status */ -+ tmp = 1 << USB_DEVICE_SELF_POWERED; -+ tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP; -+ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { -+ /* Get interface status */ -+ /* We don't have interface information in udc driver */ -+ tmp = 0; -+ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { -+ /* Get endpoint status */ -+ struct fsl_ep *target_ep; -+ -+ target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index)); -+ -+ /* stall if endpoint doesn't exist */ -+ if (!target_ep->desc) -+ goto stall; -+ tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep)) -+ << USB_ENDPOINT_HALT; -+ } -+ -+ udc->ep0_dir = USB_DIR_IN; -+ /* Borrow the per device status_req */ -+ req = udc->status_req; -+ /* Fill in the reqest structure */ -+ *((u16 *) req->req.buf) = cpu_to_le16(tmp); -+ req->ep = ep; -+ req->req.length = 2; -+ req->req.status = -EINPROGRESS; -+ req->req.actual = 0; -+ req->req.complete = NULL; -+ req->dtd_count = 0; -+ -+ /* prime the data phase */ -+ if ((fsl_req_to_dtd(req) == 0)) -+ status = fsl_queue_td(ep, req); -+ else /* no mem */ -+ goto stall; -+ -+ if (status) { -+ ERR("Can't respond to getstatus request \n"); -+ goto stall; -+ } -+ list_add_tail(&req->queue, &ep->queue); -+ udc->ep0_state = DATA_STATE_XMIT; -+ return; -+stall: -+ ep0stall(udc); -+} -+ -+static void ch9setconfig(struct fsl_udc *udc, u16 value, u16 index, -+ u16 length) -+{ -+ pr_debug("udc: 1 calling gadget driver->setup\n"); -+ udc->ep0_dir = USB_DIR_IN; -+ if (udc->driver->setup(&udc->gadget, &udc->local_setup_buff) >= 0) { -+ /* gadget layer deal with the status phase */ -+ udc->usb_state = USB_STATE_CONFIGURED; -+ udc->ep0_state = WAIT_FOR_OUT_STATUS; -+ pr_debug("udc: ep0_state now WAIT_FOR_OUT_STATUS\n"); -+ } -+} -+ -+static void setup_received_irq(struct fsl_udc *udc, -+ struct usb_ctrlrequest *setup) -+{ -+ u32 tmp; -+ u16 ptc = 0; /* port test control */ -+ int handled = 1; /* set to zero if we do not handle the message, -+ and should pass it to the gadget driver */ -+ -+ /* -+ * gadget drivers expect the setup pkt to be in wire format, -+ * so leave it alone and make local copies of stuff we need. -+ */ -+ u16 wValue = le16_to_cpu(setup->wValue); -+ u16 wIndex = le16_to_cpu(setup->wIndex); -+ u16 wLength = le16_to_cpu(setup->wLength); -+ -+ -+ pr_debug("udc: request=0x%x\n", setup->bRequest); -+ -+ udc_reset_ep_queue(udc, 0); -+ -+ /* We asume setup only occurs on EP0 */ -+ if (setup->bRequestType & USB_DIR_IN) -+ udc->ep0_dir = USB_DIR_IN; -+ else -+ udc->ep0_dir = USB_DIR_OUT; -+ -+ if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) { -+ /* handle class requests */ -+ switch (setup->bRequest) { -+ -+ case USB_BULK_RESET_REQUEST: -+ udc->ep0_dir = USB_DIR_IN; -+ if (udc->driver->setup(&udc->gadget, -+ &udc->local_setup_buff) >= 0) { -+ udc->ep0_state = WAIT_FOR_SETUP; -+ pr_debug("udc: ep0_state now WAIT_FOR_SETUP\n"); -+ } -+ break; -+ -+ default: -+ handled = 0; -+ break; -+ } -+ } else if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { -+ /* handle standard requests */ -+ switch (setup->bRequest) { -+ -+ case USB_REQ_GET_STATUS: -+ if ((setup-> -+ bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD)) -+ != (USB_DIR_IN | USB_TYPE_STANDARD)) -+ break; -+ ch9getstatus(udc, setup->bRequestType, wValue, wIndex, -+ wLength); -+ break; -+ -+ case USB_REQ_SET_ADDRESS: -+ if (setup->bRequestType != -+ (USB_DIR_OUT | USB_TYPE_STANDARD | -+ USB_RECIP_DEVICE)) -+ break; -+ ch9setaddress(udc, wValue, wIndex, wLength); -+ break; -+ -+ case USB_REQ_SET_CONFIGURATION: -+ if (setup->bRequestType != -+ (USB_DIR_OUT | USB_TYPE_STANDARD | -+ USB_RECIP_DEVICE)) -+ break; -+ /* gadget layer take over the status phase */ -+ ch9setconfig(udc, wValue, wIndex, wLength); -+ break; -+ case USB_REQ_SET_INTERFACE: -+ if (setup->bRequestType != -+ (USB_DIR_OUT | USB_TYPE_STANDARD | -+ USB_RECIP_INTERFACE)) -+ break; -+ udc->ep0_dir = USB_DIR_IN; -+ if (udc->driver->setup(&udc->gadget, -+ &udc->local_setup_buff) >= 0) -+ /* gadget layer take over the status phase */ -+ break; -+ /* Requests with no data phase */ -+ case USB_REQ_CLEAR_FEATURE: -+ case USB_REQ_SET_FEATURE: -+ { /* status transaction */ -+ int rc = -EOPNOTSUPP; -+ -+ if ((setup->bRequestType & USB_TYPE_MASK) != -+ USB_TYPE_STANDARD) -+ break; -+ -+ /* we only support set/clear feature for -+ * endpoint */ -+ if (setup->bRequestType == USB_RECIP_ENDPOINT) { -+ int dir = (wIndex & 0x0080) ? -+ EP_DIR_IN : EP_DIR_OUT; -+ int num = (wIndex & 0x000f); -+ struct fsl_ep *ep; -+ -+ if (wValue != 0 -+ || wLength != 0 -+ || (num * 2 + dir) > udc->max_ep) -+ break; -+ ep = &udc->eps[num * 2 + dir]; -+ -+ if (setup->bRequest == -+ USB_REQ_SET_FEATURE) { -+ pr_debug("udc: udc: SET_FEATURE" -+ " doing set_halt\n"); -+ rc = fsl_ep_set_halt(&ep-> ep, -+ 1); -+ } else { -+ pr_debug("udc: CLEAR_FEATURE" -+ " doing clear_halt\n"); -+ rc = fsl_ep_set_halt(&ep-> ep, -+ 0); -+ } -+ -+ } else if (setup->bRequestType == -+ USB_RECIP_DEVICE) { -+ if (setup->bRequest == -+ USB_REQ_SET_FEATURE) { -+ ptc = wIndex >> 8; -+ rc = 0; -+ } -+ if (!udc->gadget.is_otg) -+ break; -+ else if (setup->bRequest == -+ USB_DEVICE_B_HNP_ENABLE) -+ udc->gadget.b_hnp_enable = 1; -+ else if (setup->bRequest == -+ USB_DEVICE_A_HNP_SUPPORT) -+ udc->gadget.a_hnp_support = 1; -+ else if (setup->bRequest == -+ USB_DEVICE_A_ALT_HNP_SUPPORT) -+ udc->gadget.a_alt_hnp_support = -+ 1; -+ rc = 0; -+ } -+ if (rc == 0) { -+ /* send status only if -+ * fsl_ep_set_halt success */ -+ if (ep0_prime_status(udc, EP_DIR_IN)) -+ ep0stall(udc); -+ } -+ break; -+ } -+ default: -+ handled = 0; -+ break; -+ } -+ } else { -+ /* vendor requests */ -+ handled = 0; -+ } -+ -+ if (!handled) { -+ if (udc->driver->setup(&udc->gadget, &udc->local_setup_buff) -+ != 0) { -+ ep0stall(udc); -+ } else if (setup->bRequestType & USB_DIR_IN) { -+ udc->ep0_state = DATA_STATE_XMIT; -+ pr_debug("udc: ep0_state now DATA_STATE_XMIT\n"); -+ } else { -+ udc->ep0_state = DATA_STATE_RECV; -+ pr_debug("udc: ep0_state now DATA_STATE_RECV\n"); -+ } -+ } -+ -+ if (ptc) { -+ tmp =fsl_readl(&dr_regs->portsc1) | ptc << 16; -+ fsl_writel(tmp, &dr_regs->portsc1); -+ pr_debug("udc: switch to test mode.\n"); -+ } -+} -+ -+/* Process request for Data or Status phase of ep0 -+ * prime status phase if needed */ -+static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0, -+ struct fsl_req *req) -+{ -+ if (udc->usb_state == USB_STATE_ADDRESS) { -+ /* Set the new address */ -+ u32 new_address = (u32) udc->device_address; -+ fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS, -+ &dr_regs->deviceaddr); -+ } -+ -+ done(ep0, req, 0); -+ -+ switch (udc->ep0_state) { -+ case DATA_STATE_XMIT: -+ /* receive status phase */ -+ if (ep0_prime_status(udc, EP_DIR_OUT)) -+ ep0stall(udc); -+ break; -+ case DATA_STATE_RECV: -+ /* send status phase */ -+ if (ep0_prime_status(udc, EP_DIR_IN)) -+ ep0stall(udc); -+ break; -+ case WAIT_FOR_OUT_STATUS: -+ udc->ep0_state = WAIT_FOR_SETUP; -+ break; -+ case WAIT_FOR_SETUP: -+ ERR("Unexpect ep0 packets \n"); -+ break; -+ default: -+ ep0stall(udc); -+ break; -+ } -+} -+ -+/* Tripwire mechanism to ensure a setup packet payload is extracted without -+ * being corrupted by another incoming setup packet */ -+static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr) -+{ -+ u32 temp; -+ struct ep_queue_head *qh; -+ struct fsl_usb2_platform_data *pdata = udc->pdata; -+ -+ qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT]; -+ -+ /* Clear bit in ENDPTSETUPSTAT */ -+ temp = fsl_readl(&dr_regs->endptsetupstat); -+ fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat); -+ -+ /* while a hazard exists when setup package arrives */ -+ do { -+ /* Set Setup Tripwire */ -+ temp = fsl_readl(&dr_regs->usbcmd); -+ fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd); -+ -+ /* Copy the setup packet to local buffer */ -+ if (pdata->le_setup_buf) { -+ u32 *p = (u32 *)buffer_ptr; -+ u32 *s = (u32 *)qh->setup_buffer; -+ -+ /* Convert little endian setup buffer to CPU endian */ -+ *p++ = le32_to_cpu(*s++); -+ *p = le32_to_cpu(*s); -+ } else { -+ memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8); -+ } -+ } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW)); -+ -+ /* Clear Setup Tripwire */ -+ temp = fsl_readl(&dr_regs->usbcmd); -+ fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd); -+} -+ -+/* process-ep_req(): free the completed Tds for this req */ -+static int process_ep_req(struct fsl_udc *udc, int pipe, -+ struct fsl_req *curr_req) -+{ -+ struct ep_td_struct *curr_td; -+ int td_complete, actual, remaining_length, j, tmp; -+ int status = 0; -+ int errors = 0; -+ struct ep_queue_head *curr_qh = &udc->ep_qh[pipe]; -+ int direction = pipe % 2; -+ -+ curr_td = curr_req->head; -+ td_complete = 0; -+ actual = curr_req->req.length; -+ -+ for (j = 0; j < curr_req->dtd_count; j++) { -+ remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts) -+ & DTD_PACKET_SIZE) -+ >> DTD_LENGTH_BIT_POS; -+ actual -= remaining_length; -+ -+ (errors = hc32_to_cpu(curr_td->size_ioc_sts) & DTD_ERROR_MASK); -+ if (errors) { -+ if (errors & DTD_STATUS_HALTED) { -+ ERR("dTD error %08x QH=%d\n", errors, pipe); -+ /* Clear the errors and Halt condition */ -+ tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts); -+ tmp &= ~errors; -+ curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp); -+ status = -EPIPE; -+ /* FIXME: continue with next queued TD? */ -+ -+ break; -+ } -+ if (errors & DTD_STATUS_DATA_BUFF_ERR) { -+ VDBG("Transfer overflow"); -+ status = -EPROTO; -+ break; -+ } else if (errors & DTD_STATUS_TRANSACTION_ERR) { -+ VDBG("ISO error"); -+ status = -EILSEQ; -+ break; -+ } else -+ ERR("Unknown error has occured (0x%x)!\r\n", -+ errors); -+ -+ } else if (hc32_to_cpu(curr_td->size_ioc_sts) & -+ DTD_STATUS_ACTIVE) { -+ VDBG("Request not complete"); -+ status = REQ_UNCOMPLETE; -+ return status; -+ } else if (remaining_length) { -+ if (direction) { -+ VDBG("Transmit dTD remaining length not zero"); -+ status = -EPROTO; -+ break; -+ } else { -+ td_complete++; -+ break; -+ } -+ } else { -+ td_complete++; -+ VDBG("dTD transmitted successful "); -+ } -+ -+ if (j != curr_req->dtd_count - 1) -+ curr_td = curr_td->next_td_virt; -+ } -+ -+ if (status) -+ return status; -+ -+ curr_req->req.actual = actual; -+ -+ return 0; -+} -+ -+/* Process a DTD completion interrupt */ -+static void dtd_complete_irq(struct fsl_udc *udc) -+{ -+ u32 bit_pos; -+ int i, ep_num, direction, bit_mask, status; -+ struct fsl_ep *curr_ep; -+ struct fsl_req *curr_req, *temp_req; -+ -+ /* Clear the bits in the register */ -+ bit_pos = fsl_readl(&dr_regs->endptcomplete); -+ fsl_writel(bit_pos, &dr_regs->endptcomplete); -+ -+ if (!bit_pos) -+ return; -+ -+ for (i = 0; i < udc->max_ep * 2; i++) { -+ ep_num = i >> 1; -+ direction = i % 2; -+ -+ bit_mask = 1 << (ep_num + 16 * direction); -+ -+ if (!(bit_pos & bit_mask)) -+ continue; -+ -+ curr_ep = get_ep_by_pipe(udc, i); -+ -+ /* If the ep is configured */ -+ if (curr_ep->name == NULL) { -+ WARN("Invalid EP?"); -+ continue; -+ } -+ -+ /* process the req queue until an uncomplete request */ -+ list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue, -+ queue) { -+ status = process_ep_req(udc, i, curr_req); -+ -+ VDBG("status of process_ep_req= %d, ep = %d", -+ status, ep_num); -+ if (status == REQ_UNCOMPLETE) -+ break; -+ /* write back status to req */ -+ curr_req->req.status = status; -+ -+ if (ep_num == 0) { -+ ep0_req_complete(udc, curr_ep, curr_req); -+ break; -+ } else { -+ done(curr_ep, curr_req, status); -+ } -+ } -+ } -+} -+ -+/* Process a port change interrupt */ -+static void port_change_irq(struct fsl_udc *udc) -+{ -+ u32 speed; -+ -+ VDBG("portsc=0x%x", fsl_readl(&dr_regs->portsc1) ); -+ if (udc->bus_reset) -+ udc->bus_reset = 0; -+ -+ /* Bus resetting is finished */ -+ if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) { -+ /* Get the speed */ -+ speed = fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SPEED_MASK; -+ switch (speed) { -+ case PORTSCX_PORT_SPEED_HIGH: -+ udc->gadget.speed = USB_SPEED_HIGH; -+ break; -+ case PORTSCX_PORT_SPEED_FULL: -+ udc->gadget.speed = USB_SPEED_FULL; -+ break; -+ case PORTSCX_PORT_SPEED_LOW: -+ udc->gadget.speed = USB_SPEED_LOW; -+ break; -+ default: -+ udc->gadget.speed = USB_SPEED_UNKNOWN; -+ break; -+ } -+ } -+ -+ /* Update USB state */ -+ if (!udc->resume_state) -+ udc->usb_state = USB_STATE_DEFAULT; -+} -+ -+/* Process suspend interrupt */ -+static void suspend_irq(struct fsl_udc *udc) -+{ -+ udc->resume_state = udc->usb_state; -+ udc->usb_state = USB_STATE_SUSPENDED; -+ -+ /* report suspend to the driver, serial.c does not support this */ -+ if (udc->driver->suspend) -+ udc->driver->suspend(&udc->gadget); -+} -+ -+static void bus_resume(struct fsl_udc *udc) -+{ -+ udc->usb_state = udc->resume_state; -+ udc->resume_state = 0; -+ -+ /* report resume to the driver, serial.c does not support this */ -+ if (udc->driver->resume) -+ udc->driver->resume(&udc->gadget); -+} -+ -+/* Clear up all ep queues */ -+static int reset_queues(struct fsl_udc *udc) -+{ -+ u8 pipe; -+ -+ for (pipe = 0; pipe < udc->max_pipes; pipe++) -+ udc_reset_ep_queue(udc, pipe); -+ -+ /* report disconnect; the driver is already quiesced */ -+ udc->driver->disconnect(&udc->gadget); -+ -+ return 0; -+} -+ -+/* Process reset interrupt */ -+static void reset_irq(struct fsl_udc *udc) -+{ -+ u32 temp; -+ unsigned long timeout; -+ -+ /* Clear the device address */ -+ temp = fsl_readl(&dr_regs->deviceaddr); -+ fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr); -+ -+ udc->device_address = 0; -+ -+ /* Clear usb state */ -+ udc->resume_state = 0; -+ udc->ep0_dir = 0; -+ udc->ep0_state = WAIT_FOR_SETUP; -+ udc->remote_wakeup = 0; /* default to 0 on reset */ -+ udc->gadget.b_hnp_enable = 0; -+ udc->gadget.a_hnp_support = 0; -+ udc->gadget.a_alt_hnp_support = 0; -+ -+ /* Clear all the setup token semaphores */ -+ temp = fsl_readl(&dr_regs->endptsetupstat); -+ fsl_writel(temp, &dr_regs->endptsetupstat); -+ -+ /* Clear all the endpoint complete status bits */ -+ temp = fsl_readl(&dr_regs->endptcomplete); -+ fsl_writel(temp, &dr_regs->endptcomplete); -+ -+ timeout = jiffies + 100; -+ while (fsl_readl(&dr_regs->endpointprime)) { -+ /* Wait until all endptprime bits cleared */ -+ if (time_after(jiffies, timeout)) { -+ ERR("Timeout for reset\n"); -+ break; -+ } -+ cpu_relax(); -+ } -+ -+ /* Write 1s to the flush register */ -+ fsl_writel(0xffffffff, &dr_regs->endptflush); -+ -+ if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) { -+ VDBG("Bus reset"); -+ /* Bus is reseting */ -+ udc->bus_reset = 1; -+ /* Reset all the queues, include XD, dTD, EP queue -+ * head and TR Queue */ -+ reset_queues(udc); -+ udc->usb_state = USB_STATE_DEFAULT; -+ } else { -+ VDBG("Controller reset"); -+ /* initialize usb hw reg except for regs for EP, not -+ * touch usbintr reg */ -+ dr_controller_setup(udc); -+ -+ /* Reset all internal used Queues */ -+ reset_queues(udc); -+ -+ ep0_setup(udc); -+ -+ /* Enable DR IRQ reg, Set Run bit, change udc state */ -+ dr_controller_run(udc); -+ udc->usb_state = USB_STATE_ATTACHED; -+ } -+} -+ -+/* -+ * USB device controller interrupt handler -+ */ -+static irqreturn_t fsl_udc_irq(int irq, void *_udc) -+{ -+ struct fsl_udc *udc = _udc; -+ u32 irq_src; -+ irqreturn_t status = IRQ_NONE; -+ unsigned long flags; -+ -+ /* Disable ISR for OTG host mode */ -+ if (udc->stopped) -+ return IRQ_NONE; -+ spin_lock_irqsave(&udc->lock, flags); -+ irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr); -+ /* Clear notification bits */ -+ fsl_writel(irq_src, &dr_regs->usbsts); -+ -+ VDBG("irq_src [0x%8x] portsc=0x%x", irq_src, -+ fsl_readl(&dr_regs->portsc1)); -+ -+ /* Need to resume? */ -+ if (udc->usb_state == USB_STATE_SUSPENDED) -+ if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0) -+ bus_resume(udc); -+ -+ /* USB Interrupt */ -+ if (irq_src & USB_STS_INT) { -+ VDBG("Packet int"); -+ /* Setup package, we only support ep0 as control ep */ -+ if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) { -+ tripwire_handler(udc, 0, -+ (u8 *) (&udc->local_setup_buff)); -+ setup_received_irq(udc, &udc->local_setup_buff); -+ status = IRQ_HANDLED; -+ } -+ -+ /* completion of dtd */ -+ if (fsl_readl(&dr_regs->endptcomplete)) { -+ dtd_complete_irq(udc); -+ status = IRQ_HANDLED; -+ } -+ } -+ -+ /* SOF (for ISO transfer) */ -+ if (irq_src & USB_STS_SOF) { -+ status = IRQ_HANDLED; -+ } -+ -+ /* Port Change */ -+ if (irq_src & USB_STS_PORT_CHANGE) { -+ port_change_irq(udc); -+ status = IRQ_HANDLED; -+ } -+ -+ /* Reset Received */ -+ if (irq_src & USB_STS_RESET) { -+ reset_irq(udc); -+ status = IRQ_HANDLED; -+ } -+ -+ /* Sleep Enable (Suspend) */ -+ if (irq_src & USB_STS_SUSPEND) { -+ suspend_irq(udc); -+ status = IRQ_HANDLED; -+ } -+ -+ if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) { -+ VDBG("Error IRQ %x ", irq_src); -+ } -+ -+ spin_unlock_irqrestore(&udc->lock, flags); -+ return status; -+} -+ -+/*----------------------------------------------------------------* -+ * Hook to gadget drivers -+ * Called by initialization code of gadget drivers -+*----------------------------------------------------------------*/ -+int usb_gadget_register_driver(struct usb_gadget_driver *driver) -+{ -+ int retval = -ENODEV; -+ unsigned long flags = 0; -+ struct fsl_udc *udc = udc_controller; -+ -+ pr_debug("udc: udc=0x%p\n", udc); -+ -+ if (!udc) -+ return -ENODEV; -+ -+ if (!driver || (driver->speed != USB_SPEED_FULL -+ && driver->speed != USB_SPEED_HIGH) -+ || !driver->bind || !driver->disconnect -+ || !driver->setup) -+ return -EINVAL; -+ -+ if (udc->driver) -+ return -EBUSY; -+ -+ /* lock is needed but whether should use this lock or another */ -+ spin_lock_irqsave(&udc->lock, flags); -+ -+ driver->driver.bus = 0; -+ udc->softconnect = 1; -+ /* hook up the driver */ -+ udc->driver = driver; -+ udc->gadget.dev.driver = &driver->driver; -+ spin_unlock_irqrestore(&udc->lock, flags); -+ -+ /* bind udc driver to gadget driver */ -+ retval = driver->bind(&udc->gadget); -+ if (retval) { -+ pr_debug("bind to %s --> %d\n", driver->driver.name, retval); -+ udc->gadget.dev.driver = 0; -+ udc->driver = 0; -+ goto out; -+ } -+ -+ /* Enable DR IRQ reg and Set usbcmd reg Run bit */ -+ if (udc->transceiver) { -+ /* Suspend the controller until OTG enables it */ -+ udc_suspend(udc); -+ pr_debug("udc: suspend udc for OTG auto detect \n"); -+ -+ /* Export udc suspend/resume call to OTG */ -+ udc->gadget.dev.parent->driver->suspend = fsl_udc_suspend; -+ udc->gadget.dev.parent->driver->resume = fsl_udc_resume; -+ -+ retval = otg_set_peripheral(udc->transceiver, &udc->gadget); -+ if (retval < 0) { -+ printk(KERN_ERR "can't bind to transceiver\n"); -+ driver->unbind(&udc->gadget); -+ udc->gadget.dev.driver = 0; -+ udc->driver = 0; -+ return retval; -+ } -+ } else { -+ /* Enable DR IRQ reg and Set usbcmd reg Run bit */ -+ dr_controller_run(udc); -+ udc->usb_state = USB_STATE_ATTACHED; -+ udc->ep0_state = WAIT_FOR_SETUP; -+ pr_debug("udc: ep0_state now WAIT_FOR_SETUP\n"); -+ udc->ep0_dir = 0; -+ } -+ -+ printk(KERN_INFO "%s: bind to driver %s \n", udc->gadget.name, -+ driver->driver.name); -+ -+out: -+ return retval; -+} -+EXPORT_SYMBOL(usb_gadget_register_driver); -+ -+/* Disconnect from gadget driver */ -+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) -+{ -+ struct fsl_ep *loop_ep; -+ unsigned long flags; -+ -+ if (!udc_controller) -+ return -ENODEV; -+ -+ if (!driver || driver != udc_controller->driver || !driver->unbind) -+ return -EINVAL; -+ -+#ifdef CONFIG_USB_OTG -+ if (udc_controller->transceiver) -+ (void)otg_set_peripheral(udc_controller->transceiver, 0); -+#endif -+ -+ /* stop DR, disable intr */ -+ dr_controller_stop(udc_controller); -+ -+ /* in fact, no needed */ -+ udc_controller->usb_state = USB_STATE_ATTACHED; -+ udc_controller->ep0_state = WAIT_FOR_SETUP; -+ udc_controller->ep0_dir = 0; -+ -+ /* stand operation */ -+ spin_lock_irqsave(&udc_controller->lock, flags); -+ udc_controller->gadget.speed = USB_SPEED_UNKNOWN; -+ nuke(&udc_controller->eps[0], -ESHUTDOWN); -+ list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list, -+ ep.ep_list) -+ nuke(loop_ep, -ESHUTDOWN); -+ spin_unlock_irqrestore(&udc_controller->lock, flags); -+ -+ /* unbind gadget and unhook driver. */ -+ driver->unbind(&udc_controller->gadget); -+ udc_controller->gadget.dev.driver = 0; -+ udc_controller->driver = 0; -+ -+ printk(KERN_INFO "unregistered gadget '%s'\n", driver->driver.name); -+ return 0; -+} -+EXPORT_SYMBOL(usb_gadget_unregister_driver); -+ -+/*------------------------------------------------------------------------- -+ PROC File System Support -+-------------------------------------------------------------------------*/ -+#ifdef CONFIG_USB_GADGET_DEBUG_FILES -+ -+#include <linux/seq_file.h> -+ -+static const char proc_filename[] = "driver/fsl_usb2_udc"; -+ -+static int fsl_proc_read(char *page, char **start, off_t off, int count, -+ int *eof, void *_dev) -+{ -+ char *buf = page; -+ char *next = buf; -+ unsigned size = count; -+ unsigned long flags; -+ int t, i; -+ u32 tmp_reg; -+ struct fsl_ep *ep = NULL; -+ struct fsl_req *req; -+ -+ struct fsl_udc *udc = udc_controller; -+ if (off != 0) -+ return 0; -+ -+ spin_lock_irqsave(&udc->lock, flags); -+ -+ /* ------basic driver infomation ---- */ -+ t = scnprintf(next, size, -+ DRIVER_DESC "\n" -+ "%s version: %s\n" -+ "Gadget driver: %s\n\n", -+ driver_name, DRIVER_VERSION, -+ udc->driver ? udc->driver->driver.name : "(none)"); -+ size -= t; -+ next += t; -+ -+ /* ------ DR Registers ----- */ -+ tmp_reg = fsl_readl(&dr_regs->usbcmd); -+ t = scnprintf(next, size, -+ "USBCMD reg: 0x%08x\n" -+ "\tSetupTW: %d\n" -+ "\tRun/Stop: %s\n\n", -+ tmp_reg, -+ (tmp_reg & USB_CMD_SUTW) ? 1 : 0, -+ (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop"); -+ size -= t; -+ next += t; -+ -+ tmp_reg = fsl_readl(&dr_regs->usbsts); -+ t = scnprintf(next, size, -+ "USB Status Reg: 0x%08x\n" -+ "\tDr Suspend: %d Reset Received: %d " -+ "System Error: %s USB Error Interrupt: %s\n\n", -+ tmp_reg, -+ (tmp_reg & USB_STS_SUSPEND) ? 1 : 0, -+ (tmp_reg & USB_STS_RESET) ? 1 : 0, -+ (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal", -+ (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err"); -+ size -= t; -+ next += t; -+ -+ tmp_reg = fsl_readl(&dr_regs->usbintr); -+ t = scnprintf(next, size, -+ "USB Interrupt Enable Reg: 0x%08x\n" -+ "\tSleep Enable: %d SOF Received Enable: %d " -+ "Reset Enable: %d\n" -+ "\tSystem Error Enable: %d " -+ "Port Change Dectected Enable: %d\n" -+ "\tUSB Error Intr Enable: %d USB Intr Enable: %d\n\n", -+ tmp_reg, -+ (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0, -+ (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0, -+ (tmp_reg & USB_INTR_RESET_EN) ? 1 : 0, -+ (tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0, -+ (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0, -+ (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0, -+ (tmp_reg & USB_INTR_INT_EN) ? 1 : 0); -+ size -= t; -+ next += t; -+ -+ tmp_reg = fsl_readl(&dr_regs->frindex); -+ t = scnprintf(next, size, -+ "USB Frame Index Reg: Frame Number is 0x%x\n\n", -+ (tmp_reg & USB_FRINDEX_MASKS)); -+ size -= t; -+ next += t; -+ -+ tmp_reg = fsl_readl(&dr_regs->deviceaddr); -+ t = scnprintf(next, size, -+ "USB Device Address Reg: Device Addr is 0x%x\n\n", -+ (tmp_reg & USB_DEVICE_ADDRESS_MASK)); -+ size -= t; -+ next += t; -+ -+ tmp_reg = fsl_readl(&dr_regs->endpointlistaddr); -+ t = scnprintf(next, size, -+ "USB Endpoint List Address Reg:" -+ "Device Addr is 0x%x\n\n", -+ (tmp_reg & USB_EP_LIST_ADDRESS_MASK)); -+ size -= t; -+ next += t; -+ -+ tmp_reg = fsl_readl(&dr_regs->portsc1); -+ t = scnprintf(next, size, -+ "USB Port Status&Control Reg:\n" -+ "\tPort Transceiver Type : %s" "Port Speed: %s \n" -+ "\tPHY Low Power Suspend: %s" "Port Reset: %s " -+ "Port Suspend Mode: %s \n" "\tOver-current Change: %s " -+ "Port Enable/Disable Change: %s\n" -+ "\tPort Enabled/Disabled: %s" -+ "Current Connect Status: %s\n\n", ( { -+ char *s; -+ switch (tmp_reg & PORTSCX_PTS_FSLS) { -+ case PORTSCX_PTS_UTMI: -+ s = "UTMI"; break; -+ case PORTSCX_PTS_ULPI: -+ s = "ULPI "; break; -+ case PORTSCX_PTS_FSLS: -+ s = "FS/LS Serial"; break; -+ default: -+ s = "None"; break; -+ } -+ s; } ), ( { -+ char *s; -+ switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) { -+ case PORTSCX_PORT_SPEED_FULL: -+ s = "Full Speed"; break; -+ case PORTSCX_PORT_SPEED_LOW: -+ s = "Low Speed"; break; -+ case PORTSCX_PORT_SPEED_HIGH: -+ s = "High Speed"; break; -+ default: -+ s = "Undefined"; break; -+ } -+ s; -+ } ), -+ (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ? -+ "Normal PHY mode" : "Low power mode", -+ (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" : -+ "Not in Reset", -+ (tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in", -+ (tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" : -+ "No", -+ (tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" : -+ "Not change", -+ (tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" : -+ "Not correct", -+ (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ? -+ "Attached" : "Not-Att"); -+ size -= t; -+ next += t; -+ -+ tmp_reg = fsl_readl(&dr_regs->usbmode); -+ t = scnprintf(next, size, -+ "USB Mode Reg:" "Controller Mode is : %s\n\n", ( { -+ char *s; -+ switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) { -+ case USB_MODE_CTRL_MODE_IDLE: -+ s = "Idle"; break; -+ case USB_MODE_CTRL_MODE_DEVICE: -+ s = "Device Controller"; break; -+ case USB_MODE_CTRL_MODE_HOST: -+ s = "Host Controller"; break; -+ default: -+ s = "None"; break; -+ } -+ s; -+ } )); -+ size -= t; -+ next += t; -+ -+ tmp_reg = fsl_readl(&dr_regs->endptsetupstat); -+ t = scnprintf(next, size, -+ "Endpoint Setup Status Reg:" "SETUP on ep 0x%x\n\n", -+ (tmp_reg & EP_SETUP_STATUS_MASK)); -+ size -= t; -+ next += t; -+ -+ for (i = 0; i < udc->max_ep / 2; i++) { -+ tmp_reg = fsl_readl(&dr_regs->endptctrl[i]); -+ t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n", -+ i, tmp_reg); -+ size -= t; -+ next += t; -+ } -+ tmp_reg = fsl_readl(&dr_regs->endpointprime); -+ t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n", tmp_reg); -+ size -= t; -+ next += t; -+ -+#ifdef HAVE_SYS_REGS -+ tmp_reg = usb_sys_regs->snoop1; -+ t = scnprintf(next, size, "\nSnoop1 Reg : = [0x%x]\n\n", tmp_reg); -+ size -= t; -+ next += t; -+ -+ tmp_reg = usb_sys_regs->control; -+ t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n", -+ tmp_reg); -+ size -= t; -+ next += t; -+#endif -+ -+ /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */ -+ ep = &udc->eps[0]; -+ t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n", -+ ep->ep.name, ep_maxpacket(ep), ep_index(ep)); -+ size -= t; -+ next += t; -+ -+ if (list_empty(&ep->queue)) { -+ t = scnprintf(next, size, "its req queue is empty\n\n"); -+ size -= t; -+ next += t; -+ } else { -+ list_for_each_entry(req, &ep->queue, queue) { -+ t = scnprintf(next, size, -+ "req %p actual 0x%x length 0x%x buf %p\n", -+ &req->req, req->req.actual, -+ req->req.length, req->req.buf); -+ size -= t; -+ next += t; -+ } -+ } -+ /* other gadget->eplist ep */ -+ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { -+ if (ep->desc) { -+ t = scnprintf(next, size, -+ "\nFor %s Maxpkt is 0x%x " -+ "index is 0x%x\n", -+ ep->ep.name, ep_maxpacket(ep), -+ ep_index(ep)); -+ size -= t; -+ next += t; -+ -+ if (list_empty(&ep->queue)) { -+ t = scnprintf(next, size, -+ "its req queue is empty\n\n"); -+ size -= t; -+ next += t; -+ } else { -+ list_for_each_entry(req, &ep->queue, queue) { -+ t = scnprintf(next, size, -+ "req %p actual 0x%x length" -+ "0x%x buf %p\n", -+ &req->req, req->req.actual, -+ req->req.length, req->req.buf); -+ size -= t; -+ next += t; -+ } /* end for each_entry of ep req */ -+ } /* end for else */ -+ } /* end for if(ep->queue) */ -+ } /* end (ep->desc) */ -+ -+ spin_unlock_irqrestore(&udc->lock, flags); -+ -+ *eof = 1; -+ return count - size; -+} -+ -+#define create_proc_file() create_proc_read_entry(proc_filename, \ -+ 0, NULL, fsl_proc_read, NULL) -+ -+#define remove_proc_file() remove_proc_entry(proc_filename, NULL) -+ -+#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ -+ -+#define create_proc_file() do {} while (0) -+#define remove_proc_file() do {} while (0) -+ -+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Release udc structures */ -+static void fsl_udc_release(struct device *dev) -+{ -+ complete(udc_controller->done); -+ dma_free_coherent(dev, udc_controller->ep_qh_size, -+ udc_controller->ep_qh, udc_controller->ep_qh_dma); -+ kfree(udc_controller); -+} -+ -+/****************************************************************** -+ Internal structure setup functions -+*******************************************************************/ -+/*------------------------------------------------------------------ -+ * init resource for globle controller -+ * Return the udc handle on success or NULL on failure -+ ------------------------------------------------------------------*/ -+static struct fsl_udc *__init struct_udc_setup(struct platform_device *pdev) -+{ -+ struct fsl_udc *udc; -+ struct fsl_usb2_platform_data *pdata; -+ size_t size; -+ -+ udc = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); -+ if (udc == NULL) { -+ ERR("malloc udc failed\n"); -+ return NULL; -+ } -+ -+ pdata = pdev->dev.platform_data; -+ udc->phy_mode = pdata->phy_mode; /* DDD FIXME */ -+ -+ /* max_ep_nr is bidirectional ep number, max_ep doubles the number */ -+ udc->max_ep = pdata->max_ep_nr * 2; -+ -+ udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL); -+ if (!udc->eps) { -+ ERR("malloc fsl_ep failed\n"); -+ goto cleanup; -+ } -+ -+ /* initialized QHs, take care of alignment */ -+ size = udc->max_ep * sizeof(struct ep_queue_head); -+ if (size < QH_ALIGNMENT) -+ size = QH_ALIGNMENT; -+ else if ((size % QH_ALIGNMENT) != 0) { -+ size += QH_ALIGNMENT + 1; -+ size &= ~(QH_ALIGNMENT - 1); -+ } -+ udc->ep_qh = dma_alloc_coherent(&pdev->dev, size, -+ &udc->ep_qh_dma, GFP_KERNEL); -+ if (!udc->ep_qh) { -+ ERR("malloc QHs for udc failed\n"); -+ kfree(udc->eps); -+ goto cleanup; -+ } -+ -+ udc->ep_qh_size = size; -+ -+ /* Initialize ep0 status request structure */ -+ udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL), -+ struct fsl_req, req); -+ /* allocate a small amount of memory to get valid address */ -+ udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); -+ udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); -+ -+ udc->resume_state = USB_STATE_NOTATTACHED; -+ udc->usb_state = USB_STATE_POWERED; -+ udc->ep0_dir = 0; -+ udc->remote_wakeup = 0; /* default to 0 on reset */ -+ spin_lock_init(&udc->lock); -+ -+ return udc; -+ -+cleanup: -+ kfree(udc); -+ return NULL; -+} -+ -+/*---------------------------------------------------------------- -+ * Setup the fsl_ep struct for eps -+ * Link fsl_ep->ep to gadget->ep_list -+ * ep0out is not used so do nothing here -+ * ep0in should be taken care -+ *--------------------------------------------------------------*/ -+static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index, -+ char *name, int link) -+{ -+ struct fsl_ep *ep = &udc->eps[index]; -+ -+ ep->udc = udc; -+ strcpy(ep->name, name); -+ ep->ep.name = ep->name; -+ -+ ep->ep.ops = &fsl_ep_ops; -+ ep->stopped = 0; -+ -+ /* for ep0: maxP defined in desc -+ * for other eps, maxP is set by epautoconfig() called by gadget layer -+ */ -+ ep->ep.maxpacket = (unsigned short) ~0; -+ -+ /* the queue lists any req for this ep */ -+ INIT_LIST_HEAD(&ep->queue); -+ -+ /* gagdet.ep_list used for ep_autoconfig so no ep0 */ -+ if (link) -+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); -+ ep->gadget = &udc->gadget; -+ ep->qh = &udc->ep_qh[index]; -+ -+ return 0; -+} -+ -+static int board_init(struct platform_device *pdev) -+{ -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ -+ pr_debug("udc: pdev=0x%p pdata=0x%p\n", pdev, pdata); -+ -+ /* -+ * do platform specific init: check the clock, grab/config pins, etc. -+ */ -+ if (pdata->platform_init && pdata->platform_init(pdev) != 0) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+/* Driver probe functions */ -+ -+static int __init fsl_udc_probe(struct platform_device *pdev) -+{ -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ struct fsl_udc *udc; -+ unsigned int i; -+ struct otg_transceiver *transceiver = NULL; -+ int status = -ENODEV; -+ u32 id; -+ int irq_number; -+ u64 rsrc_start, rsrc_len; -+ int ret = -ENODEV; -+ -+ pr_debug("udc: pdev=0x%p pdata=0x%p\n", pdev, pdata); -+ -+ if (board_init(pdev) != 0) -+ return -EINVAL; -+ -+ /* Initialize the udc structure including QH member and other member */ -+ udc = (struct fsl_udc *) struct_udc_setup(pdev); -+ udc_controller = udc; -+ -+ if (!udc) { -+ ERR("udc is NULL \n"); -+ return -ENOMEM; -+ } -+ dev_set_drvdata(&pdev->dev, udc); -+ pr_debug("udc_controller=0x%p", udc_controller); -+ -+ udc->pdata = pdata; -+ udc->xcvr_type = pdata->xcvr_type; -+ -+#ifdef CONFIG_USB_OTG -+ udc->transceiver = otg_get_transceiver(); -+ pr_debug("udc: otg_get_transceiver returns 0x%p", udc->transceiver); -+#endif -+ -+ if (pdev->resource[1].flags != IORESOURCE_IRQ) -+ return -ENODEV; -+ -+ rsrc_start = pdev->resource[0].start; -+ rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; -+ -+ pr_debug(" start=0x%ux end=0x%ux\n", -+ pdev->resource[0].start, pdev->resource[0].end); -+ pr_debug("rsrc_start=0x%llx rsrc_len=0x%llx\n", rsrc_start, rsrc_len); -+ -+ dr_regs = (struct fsl_usb_device_regs *)pdata->regs; -+ -+ pr_debug("udc: pdate=0x%p dr_regs=0x%p\n", pdata, dr_regs); -+ pr_debug("udc: hci_version=0x%x\n", dr_regs->hciversion); -+ pr_debug("udc: otgsc at 0x%p\n", &dr_regs->otgsc); -+ -+ id = fsl_readl(&dr_regs->id); -+ printk(KERN_INFO "FSL2 USBOTG h/w ID=0x%x revision=0x%x\n", -+ id & 0x3f, id >> 16); -+ -+ /* USB OTG module IRQ */ -+ irq_number = platform_get_irq(pdev, 0); -+ if (irq_number > 128) { -+ status = request_irq(irq_number, fsl_udc_irq, IRQF_SHARED, -+ driver_name, udc); -+ if (status) { -+ ERR("can't get irq %d, err=%d\n", irq_number, status); -+ goto err2; -+ } -+ } else { -+ status = -ENODEV; -+ goto err2; -+ } -+ -+ if (!udc->transceiver) { -+ /* initialize usb hw reg except for regs for EP, -+ * leave usbintr reg untouched*/ -+ dr_controller_setup(udc); -+ } -+ -+ /* here comes the stand operations for probe -+ * set the fsl_udc->gadget.xxx -+ */ -+ udc->gadget.ops = &fsl_gadget_ops; -+ udc->gadget.is_dualspeed = 1; -+ -+ /* gadget.ep0 is a pointer */ -+ udc->gadget.ep0 = &udc->eps[0].ep; -+ INIT_LIST_HEAD(&udc->gadget.ep_list); -+ udc->gadget.speed = USB_SPEED_UNKNOWN; -+ udc->gadget.name = driver_name; -+ -+ /* Setup gadget.dev and register with kernel */ -+ strcpy(udc->gadget.dev.bus_id, "gadget"); -+ udc->gadget.dev.release = fsl_udc_release; -+ udc->gadget.dev.parent = &pdev->dev; -+ -+ ret = device_register(&udc->gadget.dev); -+ if (ret < 0) -+ goto err3; -+ -+ if (udc->transceiver) -+ udc->gadget.is_otg = 1; -+ -+ /* setup QH and epctrl for ep0 */ -+ ep0_setup(udc); -+ -+ /* setup udc->eps[] for ep0 */ -+ struct_ep_setup(udc_controller, 0, "ep0", 0); -+ /* for ep0: the desc defined here; -+ * for other eps, gadget layer called ep_enable with defined desc -+ */ -+ udc->eps[0].desc = &fsl_ep0_desc; -+ udc->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD; -+ -+ /* setup the udc->eps[] for non-control endpoints and link -+ * to gadget.ep_list */ -+ for (i = 1; i < (int)(udc->max_ep / 2); i++) { -+ char name[14]; -+ -+ sprintf(name, "ep%dout", i); -+ struct_ep_setup(udc, i * 2, name, 1); -+ sprintf(name, "ep%din", i); -+ struct_ep_setup(udc, i * 2 + 1, name, 1); -+ } -+ -+ /* use dma_pool for TD management */ -+ udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev, -+ sizeof(struct ep_td_struct), -+ DTD_ALIGNMENT, UDC_DMA_BOUNDARY); -+ if (udc->td_pool == NULL) { -+ ret = -ENOMEM; -+ goto err4; -+ } -+ -+ create_proc_file(); -+ return 0; -+ -+err4: -+ device_unregister(&udc_controller->gadget.dev); -+err3: -+ free_irq(udc_controller->irq, udc_controller); -+err2: -+ kfree(udc); -+ if (transceiver) -+ put_device(transceiver->dev); -+ release_mem_region(pdev->resource[0].start, -+ pdev->resource[0].end - pdev->resource[0].start + 1); -+ return status; -+ -+} -+ -+/* Driver removal functions -+ * Free resources -+ * Finish pending transaction -+ */ -+static int __exit fsl_udc_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev); -+ struct fsl_usb2_platform_data *pdata; -+ int irq_number; -+ -+ DECLARE_COMPLETION(done); -+ -+ pdata = pdev->dev.platform_data; -+ -+ if (!udc) -+ return -ENODEV; -+ -+ udc->done = &done; -+ -+ /* DR has been stopped in usb_gadget_unregister_driver() */ -+ -+ if (udc->transceiver) { -+ put_device(udc->transceiver->dev); -+ udc->transceiver = NULL; -+ } -+ -+ /* remove proc */ -+ remove_proc_file(); -+ -+ /* free irq */ -+ irq_number = udc->irq; -+ free_irq(pdev->resource[1].start, udc); -+ udc->irq = 0; -+ -+ /* Free allocated memory */ -+ kfree(udc->status_req->req.buf); -+ kfree(udc->status_req); -+ kfree(udc_controller->eps); -+ -+ dma_pool_destroy(udc_controller->td_pool); -+ /* deinitlaize all ep: strcut */ -+ /* deinitialize ep0: reg and QH */ -+ -+ device_unregister(&udc->gadget.dev); -+ /* free udc --wait for the release() finished */ -+ wait_for_completion(&done); -+ -+ /* -+ * do platform specific un-initialization: -+ * release iomux pins, etc. -+ */ -+ if (pdata->platform_uninit) -+ pdata->platform_uninit(pdev); -+ -+ return 0; -+} -+ -+static int udc_suspend(struct fsl_udc *udc) -+{ -+ udc->stopped = 1; -+ return 0; -+} -+ -+/* -+ * Modify Power management attributes -+ * Used by OTG statemachine to disable gadget temporarily -+ * Here we stop the DR controller and disable the irq -+ * @param dev device controller pointer -+ * @param state current state -+ * @return The function returns 0 on success or -1 if failed -+ */ -+static int fsl_udc_suspend(struct device *dev, pm_message_t state) -+{ -+ struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev); -+ pr_debug("udc: Suspend. state=%d\n", state.event); -+ return udc_suspend(udc); -+} -+ -+static int udc_resume(struct fsl_udc *udc) -+{ -+ /*Enable DR irq reg and set controller Run */ -+ if (udc->stopped) { -+ dr_controller_setup(udc); -+ dr_controller_run(udc); -+ } -+ udc->usb_state = USB_STATE_ATTACHED; -+ udc->ep0_state = WAIT_FOR_SETUP; -+ udc->ep0_dir = 0; -+ return 0; -+} -+ -+/* -+ * Invoked on USB resume. May be called in_interrupt. -+ * Here we start the DR controller and enable the irq -+ * @param dev device controller pointer -+ * @return The function returns 0 on success or -1 if failed -+ */ -+static int fsl_udc_resume(struct device *dev) -+{ -+ struct fsl_udc *udc = (struct fsl_udc *)dev_get_drvdata(dev); -+ pr_debug("udc: Resume dev=0x%p udc=0x%p\n", dev, udc); -+ -+ return udc_resume(udc); -+} -+ -+/*------------------------------------------------------------------------- -+ Register entry point for the peripheral controller driver -+--------------------------------------------------------------------------*/ -+static struct platform_driver udc_driver = { -+ .probe = fsl_udc_probe, -+ .remove = __exit_p(fsl_udc_remove), -+ .driver = { -+ .name = (char *)driver_name, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init udc_init(void) -+{ -+ printk(KERN_INFO "%s version %s init \n", driver_desc, DRIVER_VERSION); -+ return platform_driver_register(&udc_driver); -+} -+ -+module_init(udc_init); -+ -+static void __exit udc_exit(void) -+{ -+ platform_driver_unregister(&udc_driver); -+ printk(KERN_INFO "%s unregistered \n", driver_desc); -+} -+ -+module_exit(udc_exit); -+ -+MODULE_DESCRIPTION(DRIVER_DESC); -+MODULE_AUTHOR(DRIVER_AUTHOR); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/usb/host/ehci-arc.c -@@ -0,0 +1,436 @@ -+/* -+ * drivers/usb/host/ehci-arc.c -+ * -+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/* Note: this file is #included by ehci-hcd.c */ -+ -+#include <linux/platform_device.h> -+#include <linux/usb/fsl_usb2.h> -+#include <linux/fsl_devices.h> -+#include <linux/usb/otg.h> -+ -+#include "ehci-fsl.h" -+ -+ -+/* FIXME: Power Managment is un-ported so temporarily disable it */ -+#undef CONFIG_PM -+ -+/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ -+ -+/* configure so an HC device and id are always provided */ -+/* always called with process context; sleeping is OK */ -+ -+/** -+ * usb_hcd_fsl_probe - initialize FSL-based HCDs -+ * @drvier: Driver to be used for this HCD -+ * @pdev: USB Host Controller being probed -+ * Context: !in_interrupt() -+ * -+ * Allocates basic resources for this USB host controller. -+ * -+ */ -+static int usb_hcd_fsl_probe(const struct hc_driver *driver, -+ struct platform_device *pdev) -+{ -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ struct usb_hcd *hcd; -+ struct resource *res; -+ int irq; -+ int retval; -+ -+ pr_debug("initializing FSL-SOC USB Controller\n"); -+ -+ /* Need platform data for setup */ -+ if (!pdata) { -+ dev_err(&pdev->dev, -+ "No platform data for %s.\n", pdev->dev.bus_id); -+ return -ENODEV; -+ } -+ -+ retval = fsl_platform_verify(pdev); -+ if (retval) -+ return retval; -+ -+ /* -+ * do platform specific init: check the clock, grab/config pins, etc. -+ */ -+ if (pdata->platform_init && pdata->platform_init(pdev)) { -+ retval = -ENODEV; -+ goto err1; -+ } -+ -+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ if (!res) { -+ dev_err(&pdev->dev, -+ "Found HC with no IRQ. Check %s setup!\n", -+ pdev->dev.bus_id); -+ return -ENODEV; -+ } -+ irq = res->start; -+ -+ fsl_platform_set_vbus_power(pdev, 1); -+ -+ hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id); -+ if (!hcd) { -+ retval = -ENOMEM; -+ goto err1; -+ } -+ -+ if (pdata->regs) { -+ pr_debug("REGS: using pdata->regs (0x%p)\n", pdata->regs); -+ hcd->regs = pdata->regs; -+ hcd->rsrc_start = pdata->r_start; -+ hcd->rsrc_len = pdata->r_len; -+ } else { -+ pr_debug("REGS: NO pdata->regs\n"); -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "Found HC with no register addr. " -+ "Check %s setup!\n", pdev->dev.bus_id); -+ retval = -ENODEV; -+ goto err2; -+ } -+ hcd->rsrc_start = res->start; -+ hcd->rsrc_len = res->end - res->start + 1; -+ -+ /* -+ printk("DDD %s(): rsrc_start=0x%llx rsrc_len=0x%llx " -+ "pdata=0x%p\n", __FUNCTION__, -+ hcd->rsrc_start, hcd->rsrc_len, pdata); -+ */ -+ -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, -+ driver->description)) { -+ dev_dbg(&pdev->dev, "request_mem_region failed\n"); -+ retval = -EBUSY; -+ goto err2; -+ } -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ -+ if (hcd->regs == NULL) { -+ dev_dbg(&pdev->dev, "error mapping memory\n"); -+ retval = -EFAULT; -+ goto err3; -+ } -+ } -+ hcd->power_budget = pdata->power_budget; -+ -+ /* DDD -+ * the following must be done by this point, otherwise the OTG -+ * host port doesn't make it thru initializtion. -+ * ehci_halt(), called by ehci_fsl_setup() returns -ETIMEDOUT -+ */ -+ fsl_platform_set_host_mode(hcd); -+ -+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED); -+ if (retval != 0) -+ goto err4; -+ -+#if defined(CONFIG_USB_OTG) -+ if (pdata->does_otg) { -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ -+ ehci->transceiver = otg_get_transceiver(); -+ -+ if (ehci->transceiver) { -+ retval = otg_set_host(ehci->transceiver, -+ &ehci_to_hcd(ehci)->self); -+ if (retval) { -+ if (ehci->transceiver) -+ put_device(ehci->transceiver->dev); -+ goto err3; -+ } -+ } else { -+ printk(KERN_ERR "can't find transceiver\n"); -+ retval = -ENODEV; -+ goto err3; -+ } -+ } -+#endif -+ -+ return retval; -+ -+err4: -+ /* DDD only if we did the iomap() iounmap(hcd->regs); */ -+err3: -+ /* DDD only if we did a request_ -+ * release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ */ -+err2: -+ usb_put_hcd(hcd); -+err1: -+ dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval); -+ if (pdata->platform_uninit) -+ pdata->platform_uninit(pdev); -+ return retval; -+} -+ -+/* may be called without controller electrically present */ -+/* may be called with controller, bus, and devices active */ -+ -+/** -+ * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs -+ * @dev: USB Host Controller being removed -+ * Context: !in_interrupt() -+ * -+ * Reverses the effect of usb_hcd_fsl_probe(). -+ * -+ */ -+static void usb_hcd_fsl_remove(struct usb_hcd *hcd, -+ struct platform_device *pdev) -+{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ -+ /* DDD shouldn't we turn off the power here? */ -+ fsl_platform_set_vbus_power(pdev, 0); -+ -+ usb_remove_hcd(hcd); -+ -+ if (ehci->transceiver) { -+ (void)otg_set_host(ehci->transceiver, 0); -+ put_device(ehci->transceiver->dev); -+ } -+ usb_put_hcd(hcd); -+ -+ /* -+ * do platform specific un-initialization: -+ * release iomux pins, etc. -+ */ -+ if (pdata->platform_uninit) -+ pdata->platform_uninit(pdev); -+} -+ -+/* called after powerup, by probe or system-pm "wakeup" */ -+static int ehci_fsl_reinit(struct ehci_hcd *ehci) -+{ -+ fsl_platform_usb_setup(ehci_to_hcd(ehci)); -+ ehci_port_power(ehci, 0); -+ -+ return 0; -+} -+ -+/* called during probe() after chip reset completes */ -+static int ehci_fsl_setup(struct usb_hcd *hcd) -+{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ int retval; -+ struct fsl_usb2_platform_data *pdata; -+ pdata = hcd->self.controller-> platform_data; -+ -+ ehci->big_endian_desc = pdata->big_endian_desc; -+ ehci->big_endian_mmio = pdata->big_endian_mmio; -+ -+ /* EHCI registers start at offset 0x100 */ -+ ehci->caps = hcd->regs + 0x100; -+ ehci->regs = hcd->regs + 0x100 + -+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ -+ pr_debug("%s(): ehci->caps=0x%p ehci->regs=0x%p\n", __FUNCTION__, -+ ehci->caps, ehci->regs); -+ -+ dbg_hcs_params(ehci, "reset"); -+ dbg_hcc_params(ehci, "reset"); -+ -+ /* cache this readonly data; minimize chip reads */ -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ -+ retval = ehci_halt(ehci); -+ if (retval) -+ return retval; -+ -+ /* data structure init */ -+ retval = ehci_init(hcd); -+ if (retval) -+ return retval; -+ -+ ehci->is_tdi_rh_tt = 1; -+ -+ ehci->sbrn = 0x20; -+ -+ ehci_reset(ehci); -+ -+ retval = ehci_fsl_reinit(ehci); -+ return retval; -+} -+ -+static const struct hc_driver ehci_fsl_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "Freescale On-Chip EHCI Host Controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ -+ /* -+ * generic hardware linkage -+ */ -+ .irq = ehci_irq, -+ .flags = FSL_PLATFORM_HC_FLAGS, -+ -+ /* -+ * basic lifecycle operations -+ */ -+ .reset = ehci_fsl_setup, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, -+ -+ /* -+ * managing i/o requests and associated device resources -+ */ -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ -+ /* -+ * scheduling support -+ */ -+ .get_frame_number = ehci_get_frame, -+ -+ /* -+ * root hub support -+ */ -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+ .bus_suspend = ehci_bus_suspend, -+ .bus_resume = ehci_bus_resume, -+}; -+ -+#ifdef CONFIG_USB_OTG -+/* -+ * Holding pen for all the EHCI registers except port_status, -+ * which is a zero element array and hence takes no space. -+ * The port_status register is saved in usb_ehci_portsc. -+ */ -+volatile static struct ehci_regs usb_ehci_regs; -+static u32 usb_ehci_portsc; -+ -+/* suspend/resume, section 4.3 */ -+ -+/* These routines rely on the bus (pci, platform, etc) -+ * to handle powerdown and wakeup, and currently also on -+ * transceivers that don't need any software attention to set up -+ * the right sort of wakeup. -+ * -+ * They're also used for turning on/off the port when doing OTG. -+ */ -+static int ehci_fsl_drv_suspend(struct platform_device *pdev, -+ pm_message_t message) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ u32 tmp; -+ -+ pr_debug("%s pdev=0x%p ehci=0x%p hcd=0x%p\n", -+ __FUNCTION__, pdev, ehci, hcd); -+ pr_debug("%s ehci->regs=0x%p hcd->regs=0x%p hcd->state=%d\n", -+ __FUNCTION__, ehci->regs, hcd->regs, hcd->state); -+ -+ hcd->state = HC_STATE_SUSPENDED; -+ pdev->dev.power.power_state = PMSG_SUSPEND; -+ -+ if (hcd->driver->suspend) -+ return hcd->driver->suspend(hcd, message); -+ -+ /* ignore non-host interrupts */ -+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -+ -+ tmp = ehci_readl(ehci, &ehci->regs->command); -+ tmp &= ~CMD_RUN; -+ ehci_writel(ehci, tmp, &ehci->regs->command); -+ -+ memcpy((void *)&usb_ehci_regs, ehci->regs, sizeof(struct ehci_regs)); -+ usb_ehci_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]); -+ -+ /* clear the W1C bits */ -+ usb_ehci_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS); -+ -+ fsl_platform_set_vbus_power(pdev, 0); -+ /* clear PP to cut power to the port */ -+ tmp = ehci_readl(ehci, &ehci->regs->port_status[0]); -+ tmp &= ~PORT_POWER; -+ ehci_writel(ehci, tmp, &ehci->regs->port_status[0]); -+ -+ return 0; -+} -+ -+static int ehci_fsl_drv_resume(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ u32 tmp; -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ -+ pr_debug("%s pdev=0x%p pdata=0x%p ehci=0x%p hcd=0x%p\n", -+ __FUNCTION__, pdev, pdata, ehci, hcd); -+ -+ pr_debug("%s ehci->regs=0x%p hcd->regs=0x%p\n", -+ __FUNCTION__, ehci->regs, hcd->regs); -+ -+ memcpy(ehci->regs, (void *)&usb_ehci_regs, sizeof(struct ehci_regs)); -+ -+ tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); -+ ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE); -+ pr_debug("tmp %08x set usbmode %08x\n", tmp, -+ ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE)); -+ -+ ehci_writel(ehci, usb_ehci_portsc, &ehci->regs->port_status[0]); -+ pr_debug("set portsc %08x %08x\n", usb_ehci_portsc, -+ ehci_readl(ehci, &ehci->regs->port_status[0])); -+ -+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -+ hcd->state = HC_STATE_RUNNING; -+ pdev->dev.power.power_state = PMSG_ON; -+ -+ tmp = ehci_readl(ehci, &ehci->regs->command); -+ tmp |= CMD_RUN; -+ ehci_writel(ehci, tmp, &ehci->regs->command); -+ -+ fsl_platform_set_vbus_power(pdev, 1); -+ -+ usb_hcd_resume_root_hub(hcd); -+ -+ return 0; -+} -+#endif /* CONFIG_USB_OTG */ -+ -+static int ehci_fsl_drv_probe(struct platform_device *pdev) -+{ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev); -+} -+ -+static int ehci_fsl_drv_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); -+ -+ usb_hcd_fsl_remove(hcd, pdev); -+ -+ return 0; -+} -+ -+MODULE_ALIAS("fsl-ehci"); -+ -+static struct platform_driver ehci_fsl_driver = { -+ .probe = ehci_fsl_drv_probe, -+ .remove = ehci_fsl_drv_remove, -+ .shutdown = usb_hcd_platform_shutdown, -+#ifdef CONFIG_USB_OTG -+ .suspend = ehci_fsl_drv_suspend, -+ .resume = ehci_fsl_drv_resume, -+#endif -+ .driver = { -+ .name = "fsl-ehci", -+ }, -+}; ---- a/drivers/usb/host/ehci-fsl.h -+++ b/drivers/usb/host/ehci-fsl.h -@@ -18,6 +18,8 @@ - #ifndef _EHCI_FSL_H - #define _EHCI_FSL_H - -+#include <linux/usb/fsl_xcvr.h> -+ - /* offsets for the non-ehci registers in the FSL SOC USB controller */ - #define FSL_SOC_USB_ULPIVP 0x170 - #define FSL_SOC_USB_PORTSC1 0x184 -@@ -34,5 +36,29 @@ - #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ - #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ - #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ --#define SNOOP_SIZE_2GB 0x1e -+ -+#ifdef CONFIG_MPC834x -+#include <sysdev/fsl_usb.h> -+#endif -+ -+#ifdef CONFIG_ARCH_MX3 -+#include <asm/arch/mx31_usb.h> -+#endif -+ -+#ifdef CONFIG_ARCH_MX27 -+#include <asm/arch/mx27_usb.h> -+#endif -+ -+#ifdef CONFIG_M54455 -+#include <asm-m68k/mcf5445x_usb.h> -+#endif -+ -+ -+static void fsl_platform_set_vbus_power(struct platform_device *pdev, int on) -+{ -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ -+ if (pdata->xcvr_ops && pdata->xcvr_ops->set_vbus_power) -+ pdata->xcvr_ops->set_vbus_power(pdata, on); -+} - #endif /* _EHCI_FSL_H */ ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -122,6 +122,12 @@ struct ehci_hcd { /* one per controlle - - u8 sbrn; /* packed release number */ - -+ /* -+ * OTG controllers and transceivers need software interaction; -+ * other external transceivers should be software-transparent -+ */ -+ struct otg_transceiver *transceiver; -+ - /* irq statistics */ - #ifdef EHCI_STATS - struct ehci_stats stats; -@@ -753,6 +759,22 @@ ehci_port_speed(struct ehci_hcd *ehci, u - #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) - #endif - -+#if defined(CONFIG_COLDFIRE) -+/* -+ * Sorry, include/asm-m68k/io.h is messed up. It will give you a -+ * BE readl or a LE readl depending on whether or not CONFIG_PCI is set. -+ * how broken is that? Do the right thing here. -+ */ -+#undef readl -+#undef writel -+ -+#define readl(addr) in_le32((__force unsigned *)(addr)) -+#define writel(val,addr) out_le32((__force unsigned *)(addr),(val)) -+ -+#define readl_be(addr) in_be32((__force unsigned *)(addr)) -+#define writel_be(val, addr) out_be32((__force unsigned *)(addr), (val)) -+#endif -+ - static inline unsigned int ehci_readl(const struct ehci_hcd *ehci, - __u32 __iomem * regs) - { ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1043,6 +1043,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ixp4xx_ehci_driver - #endif - -+#ifdef CONFIG_M54455 -+#include "ehci-arc.c" -+#define PLATFORM_DRIVER ehci_fsl_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) - #error "missing bus glue for ehci-hcd" ---- a/drivers/usb/host/ehci-mem.c -+++ b/drivers/usb/host/ehci-mem.c -@@ -40,7 +40,8 @@ static inline void ehci_qtd_init(struct - { - memset (qtd, 0, sizeof *qtd); - qtd->qtd_dma = dma; -- qtd->hw_token = cpu_to_le32 (QTD_STS_HALT); -+ // DDD official code` has: qtd->hw_token = cpu_to_le32 (QTD_STS_HALT); -+ qtd->hw_token = cpu_to_hc32 (ehci, QTD_STS_HALT); - qtd->hw_next = EHCI_LIST_END(ehci); - qtd->hw_alt_next = EHCI_LIST_END(ehci); - INIT_LIST_HEAD (&qtd->qtd_list); -@@ -211,9 +212,11 @@ static int ehci_mem_init (struct ehci_hc - } - - /* Hardware periodic table */ -- ehci->periodic = (__le32 *) -+ // DDD official code has: ehci->periodic = (__le32 *) -+ ehci->periodic = (__hc32 *) - dma_alloc_coherent (ehci_to_hcd(ehci)->self.controller, -- ehci->periodic_size * sizeof(__le32), -+ // DDD official: ehci->periodic_size * sizeof(__le32), -+ ehci->periodic_size * sizeof(__hc32), - &ehci->periodic_dma, 0); - if (ehci->periodic == NULL) { - goto fail; ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -32,6 +32,7 @@ config USB_EHCI_HCD - config USB_EHCI_ROOT_HUB_TT - bool "Root Hub Transaction Translators (EXPERIMENTAL)" - depends on USB_EHCI_HCD && EXPERIMENTAL -+ default y if M54455 - ---help--- - Some EHCI chips have vendor-specific extensions to integrate - transaction translators, so that no OHCI or UHCI companion -@@ -60,12 +61,12 @@ config USB_EHCI_TT_NEWSCHED - - config USB_EHCI_BIG_ENDIAN_MMIO - bool -- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX) -+ depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || M54455) - default y - - config USB_EHCI_BIG_ENDIAN_DESC - bool -- depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX) -+ depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || M54455) - default y - - config USB_EHCI_FSL -@@ -260,3 +261,19 @@ config USB_R8A66597_HCD - To compile this driver as a module, choose M here: the - module will be called r8a66597-hcd. - -+choice -+ prompt "Select transceiver" -+ depends on M54455 -+ default USB_M5445X_ULPI -+ -+config USB_M5445X_ULPI -+ bool "External ULPI" -+ ---help--- -+ Enable support for the external HS ULPI transceiver. -+ -+config USB_M5445X_FSLS -+ bool "On-chip (FL/LS only)" -+ ---help--- -+ Enable support for the on-chip FL/LS transceiver. -+endchoice -+ ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -6,7 +6,7 @@ ifeq ($(CONFIG_USB_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG - endif - --obj-$(CONFIG_PCI) += pci-quirks.o -+#obj-$(CONFIG_PCI) += pci-quirks.o - - obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o - obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o ---- a/drivers/usb/Kconfig -+++ b/drivers/usb/Kconfig -@@ -55,6 +55,7 @@ config USB_ARCH_HAS_EHCI - default y if PPC_83xx - default y if SOC_AU1200 - default y if ARCH_IXP4XX -+ default y if M54455 - default PCI - - # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -32,3 +32,5 @@ obj-$(CONFIG_USB) += misc/ - - obj-$(CONFIG_USB_ATM) += atm/ - obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ -+ -+obj-$(CONFIG_USB_OTG) += otg/ ---- /dev/null -+++ b/drivers/usb/otg/fsl_otg.c -@@ -0,0 +1,1306 @@ -+/* -+ * Copyright (c) Freescale Semiconductor, Inc. 2006-2007 -+ * -+ * USB OTG ULPI driver -+ * -+ * Based on code for MPC from: -+ * Leo Li<LeoLi@freescale.com> -+ * Jerry Huang<Chang-Ming.Huang@freescale.com> -+ * -+ * and M5329 code from -+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com -+ * Andrey Butok -+ * -+ * Initialization based on code from Shlomi Gridish. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ *************************************************************************** -+ * Changes: -+ * v0.3 08 August 2007 Duck -+ * v0.2 20 October 2006 Andrey Butok -+ * Issues fixing and some changes. -+ * v0.1 September 2006 Yaroslav Vinogradov -+ * Initial version. -+ * -+ */ -+ -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/kernel.h> -+#include <linux/delay.h> -+#include <linux/ioport.h> -+#include <linux/sched.h> -+#include <linux/slab.h> -+#include <linux/smp_lock.h> -+#include <linux/proc_fs.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/reboot.h> -+#include <linux/timer.h> -+#include <linux/list.h> -+#include <linux/interrupt.h> -+#include <linux/usb.h> -+#include <linux/device.h> -+#include <linux/platform_device.h> -+#include <linux/usb/ch9.h> -+#include <linux/usb_gadget.h> -+#include <linux/workqueue.h> -+#include <linux/time.h> -+#include <linux/fsl_devices.h> -+#include <linux/usb/fsl_usb2.h> -+ -+#include <linux/io.h> -+ -+#if defined CONFIG_M54455 -+#include <asm/mcfsim.h> -+#endif -+ -+#define USE_WORK_QUEUES -+#include "fsl_otg.h" -+ -+#define CONFIG_USB_OTG_DEBUG_FILES -+#define DRIVER_VERSION "Revision: 1.56" -+#define DRIVER_AUTHOR "Freescale Semiconductor Inc." -+#define DRIVER_DESC "Freescale USB OTG ULPI Driver" -+#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC -+ -+MODULE_DESCRIPTION("Freescale USB OTG Controller Driver"); -+ -+static const char driver_name[] = "fsl-usb2-otg"; -+ -+static spinlock_t usb_dr_regs_lock; -+ -+/*#define HA_DATA_PULSE 1*/ -+ -+volatile static struct fsl_usb_device_regs *usb_dr_regs; -+static struct fsl_otg *fsl_otg_dev; -+static int srp_wait_done; -+ -+/* Driver specific timers */ -+struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr, -+ *b_srp_wait_tmr, *a_wait_enum_tmr; -+ -+static struct list_head active_timers; -+ -+static struct fsl_otg_config fsl_otg_initdata = { -+ .otg_port = 1, -+}; -+ -+#if 0 -+static void dump_state(const char *string, struct otg_fsm *fsm) -+{ -+ printk(KERN_DEBUG "%s\n\tOTG state: %s\n", string, -+ state_string(fsl_otg_dev->otg.state)); -+ printk(KERN_DEBUG "\tFSM protocol=%s\n", fsm->protocol ? -+ (fsm->protocol == PROTO_HOST ? "Host" : "Gadget") -+ : "None"); -+ -+ /* regs */ -+ printk(KERN_DEBUG "\t OTGSC 0x%08x\n", -+ fsl_readl(&usb_dr_regs->otgsc)); -+ printk(KERN_DEBUG "\tPORTSC1 0x%08x\n", -+ fsl_readl(&usb_dr_regs->portsc1)); -+ printk(KERN_DEBUG "\tUSBMODE 0x%08x\n", -+ fsl_readl(&usb_dr_regs->usbmode)); -+ printk(KERN_DEBUG "\t USBCMD 0x%08x\n", -+ fsl_readl(&usb_dr_regs->usbcmd)); -+ printk(KERN_DEBUG "\t USBSTS 0x%08x\n", -+ fsl_readl(&usb_dr_regs->usbsts)); -+ -+ /* ------ State Machine Variables ----- */ -+ printk(KERN_DEBUG "\ta_bus_req: %d\n", fsm->a_bus_req); -+ printk(KERN_DEBUG "\tb_bus_req: %d\n", fsm->b_bus_req); -+ printk(KERN_DEBUG "\ta_bus_resume: %d\n", fsm->a_bus_resume); -+ printk(KERN_DEBUG "\ta_bus_suspend: %d\n", fsm->a_bus_suspend); -+ printk(KERN_DEBUG "\ta_conn: %d\n", fsm->a_conn); -+ printk(KERN_DEBUG "\ta_sess_vld: %d\n", fsm->a_sess_vld); -+ printk(KERN_DEBUG "\ta_srp_det: %d\n", fsm->a_srp_det); -+ printk(KERN_DEBUG "\ta_vbus_vld: %d\n", fsm->a_vbus_vld); -+ printk(KERN_DEBUG "\tb_bus_resume: %d\n", fsm->b_bus_resume); -+ printk(KERN_DEBUG "\tb_bus_suspend: %d\n", fsm->b_bus_suspend); -+ printk(KERN_DEBUG "\tb_conn: %d\n", fsm->b_conn); -+ printk(KERN_DEBUG "\tb_se0_srp: %d\n", fsm->b_se0_srp); -+ printk(KERN_DEBUG "\tb_sess_end: %d\n", fsm->b_sess_end); -+ printk(KERN_DEBUG "\tb_sess_vld: %d\n", fsm->b_sess_vld); -+ printk(KERN_DEBUG "\tid: %d\n", fsm->id); -+} -+#endif -+ -+ -+/* Routines to access transceiver ULPI registers */ -+u8 view_ulpi(u8 addr) -+{ -+ u32 temp; -+ -+ temp = 0x40000000 | (addr << 16); -+ fsl_writel(temp, &usb_dr_regs->ulpiview); -+ -+ udelay(1000); -+ -+ /* DDD timeout this loop: */ -+ do { -+ temp = fsl_readl(&usb_dr_regs->ulpiview); -+ } while (temp & 0x40000000); -+ -+ return (temp & 0x0000ff00) >> 8; -+} -+ -+int write_ulpi(u8 addr, u8 data) -+{ -+ u32 temp; -+ -+ temp = 0x60000000 | (addr << 16) | data; -+ fsl_writel(temp, &usb_dr_regs->ulpiview); -+ return 0; -+} -+ -+/* prototype declaration */ -+void fsl_otg_add_timer(void *timer); -+void fsl_otg_del_timer(void *timer); -+ -+/* -------------------------------------------------------------*/ -+/* Operations that will be called from OTG Finite State Machine */ -+ -+/* Charge vbus for vbus pulsing in SRP */ -+void fsl_otg_chrg_vbus(int on) -+{ -+ u32 tmp; -+ -+ VDBG(" %d\n", on); -+ -+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; -+ -+ if (on) { -+ tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE; -+ tmp |= OTGSC_CTRL_VBUS_CHARGE; -+ } else { -+ tmp &= ~OTGSC_CTRL_VBUS_CHARGE; -+ } -+ fsl_writel(tmp, &usb_dr_regs->otgsc); -+} -+ -+/* Discharge vbus through a resistor to ground */ -+void fsl_otg_dischrg_vbus(int on) -+{ -+ u32 tmp; -+ -+ VDBG(" %d\n", on); -+ -+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; -+ -+ if (on) -+ tmp |= OTGSC_CTRL_VBUS_DISCHARGE; -+ else -+ tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE; -+ -+ fsl_writel(tmp, &usb_dr_regs->otgsc); -+} -+ -+/* A-device driver vbus, controlled through PP bit in PORTSC */ -+void fsl_otg_drv_vbus(int on) -+{ -+ u32 tmp; -+ -+ VDBG(" %d\n", on); -+ -+ tmp = fsl_readl(&usb_dr_regs->portsc1) & ~PORTSCX_W1C_BITS; -+ -+ if (on) -+ tmp |= PORTSCX_PORT_POWER; -+ else -+ tmp &= ~PORTSCX_PORT_POWER; -+ -+ fsl_writel(tmp, &usb_dr_regs->portsc1); -+} -+ -+/* Pull-up D+, signalling connect by periperal. Also used in -+ * data-line pulsing in SRP */ -+void fsl_otg_loc_conn(int on) -+{ -+ u32 tmp; -+ -+ VDBG(" %d\n", on); -+ -+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; -+ -+ if (on) -+ tmp |= OTGSC_CTRL_DATA_PULSING; -+ else -+ tmp &= ~OTGSC_CTRL_DATA_PULSING; -+ -+ fsl_writel(tmp, &usb_dr_regs->otgsc); -+} -+ -+/* Generate SOF by host. This is controlled through suspend/resume the -+ * port. In host mode, controller will automatically send SOF. -+ * Suspend will block the data on the port. -+ */ -+void fsl_otg_loc_sof(int on) -+{ -+ u32 tmp; -+ -+ VDBG(" %d\n", on); -+ -+ tmp = fsl_readl(&usb_dr_regs->portsc1) & ~PORTSCX_W1C_BITS; -+ -+ if (on) -+ tmp |= PORTSCX_PORT_FORCE_RESUME; -+ else -+ tmp |= PORTSCX_PORT_SUSPEND; -+ -+ fsl_writel(tmp, &usb_dr_regs->portsc1); -+} -+ -+/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */ -+void fsl_otg_start_pulse(void) -+{ -+ u32 __attribute__ ((unused)) tmp; -+ -+ VDBG("\n"); -+ srp_wait_done = 0; -+ -+#ifdef HA_DATA_PULSE -+ tmp = fsl_readl(&usb_dr_regs->otgsc) &= ~OTGSC_INTSTS_MASK; -+ tmp |= OTGSC_HA_DATA_PULSE; -+ fsl_writel(tmp, &usb_dr_regs->otgsc); -+#else -+ fsl_otg_loc_conn(1); -+#endif -+ -+ fsl_otg_add_timer(b_data_pulse_tmr); -+} -+ -+void fsl_otg_pulse_vbus(void); -+ -+void b_data_pulse_end(unsigned long foo) -+{ -+#ifdef HA_DATA_PULSE -+#else -+ fsl_otg_loc_conn(0); -+#endif -+ -+ /* Do VBUS pulse after data pulse */ -+ fsl_otg_pulse_vbus(); -+} -+ -+void fsl_otg_pulse_vbus(void) -+{ -+ srp_wait_done = 0; -+ fsl_otg_chrg_vbus(1); -+ /* start the timer to end vbus charge */ -+ fsl_otg_add_timer(b_vbus_pulse_tmr); -+} -+ -+void b_vbus_pulse_end(unsigned long foo) -+{ -+ fsl_otg_chrg_vbus(0); -+ -+ /* As USB3300 using the same a_sess_vld and b_sess_vld voltage -+ * we need to discharge the bus for a while to distinguish -+ * residual voltage of vbus pulsing and A device pull up */ -+ fsl_otg_dischrg_vbus(1); -+ fsl_otg_add_timer(b_srp_wait_tmr); -+} -+ -+void b_srp_end(unsigned long foo) -+{ -+ fsl_otg_dischrg_vbus(0); -+ srp_wait_done = 1; -+ -+ if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) && -+ fsl_otg_dev->fsm.b_sess_vld) -+ fsl_otg_dev->fsm.b_srp_done = 1; -+} -+ -+/* Workaround for a_host suspending too fast. When a_bus_req=0, -+ * a_host will start by SRP. It needs to set b_hnp_enable before -+ * actually suspending to start HNP -+ */ -+void a_wait_enum(unsigned long foo) -+{ -+ VDBG("a_wait_enum timeout\n"); -+ if (!fsl_otg_dev->otg.host->b_hnp_enable) -+ fsl_otg_add_timer(a_wait_enum_tmr); -+ else -+ otg_statemachine(&fsl_otg_dev->fsm); -+} -+ -+/* ------------------------------------------------------*/ -+ -+/* The timeout callback function to set time out bit */ -+void set_tmout(unsigned long indicator) -+{ -+ *(int *)indicator = 1; -+} -+ -+/* Initialize timers */ -+void fsl_otg_init_timers(struct otg_fsm *fsm) -+{ -+ /* FSM used timers */ -+ fsm->a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, -+ (unsigned long)&fsm->a_wait_vrise_tmout); -+ fsm->a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON, -+ (unsigned long)&fsm->a_wait_bcon_tmout); -+ fsm->a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, -+ (unsigned long)&fsm->a_aidl_bdis_tmout); -+ fsm->b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST, -+ (unsigned long)&fsm->b_ase0_brst_tmout); -+ fsm->b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, -+ (unsigned long)&fsm->b_se0_srp); -+ fsm->b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL, -+ (unsigned long)&fsm->b_srp_done); -+ fsm->a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10, -+ (unsigned long)&fsm); -+ -+ /* device driver used timers */ -+ b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0); -+ b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end, -+ TB_DATA_PLS, 0); -+ b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end, -+ TB_VBUS_PLS, 0); -+ -+} -+ -+/* Add timer to timer list */ -+void fsl_otg_add_timer(void *gtimer) -+{ -+ struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer; -+ struct fsl_otg_timer *tmp_timer; -+ -+ /* Check if the timer is already in the active list, -+ * if so update timer count -+ */ -+ list_for_each_entry(tmp_timer, &active_timers, list) -+ if (tmp_timer == timer) { -+ timer->count = timer->expires; -+ return; -+ } -+ timer->count = timer->expires; -+ list_add_tail(&timer->list, &active_timers); -+} -+ -+/* Remove timer from the timer list; clear timeout status */ -+void fsl_otg_del_timer(void *gtimer) -+{ -+ struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer; -+ struct fsl_otg_timer *tmp_timer, *del_tmp; -+ -+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) -+ if (tmp_timer == timer) -+ list_del(&timer->list); -+} -+ -+/* -+ * Reduce timer count by 1, and find timeout conditions. -+ * Called by fsl_otg 1ms timer interrupt -+ */ -+int fsl_otg_tick_timer(void) -+{ -+ struct fsl_otg_timer *tmp_timer, *del_tmp; -+ int expired = 0; -+ -+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { -+ tmp_timer->count--; -+ /* check if timer expires */ -+ if (!tmp_timer->count) { -+ list_del(&tmp_timer->list); -+ tmp_timer->function(tmp_timer->data); -+ expired = 1; -+ } -+ } -+ -+ return expired; -+} -+ -+/* Reset controller, not reset the bus */ -+void otg_reset_controller(void) -+{ -+ u32 command; -+ unsigned long flags; -+ int timeout; -+ -+ VDBG("\n"); -+ -+ spin_lock_irqsave(&usb_dr_regs_lock, flags); -+ -+ command = fsl_readl(&usb_dr_regs->usbcmd); -+ command |= USB_CMD_CTRL_RESET; -+ fsl_writel(command, &usb_dr_regs->usbcmd); -+ spin_unlock_irqrestore(&usb_dr_regs_lock, flags); -+ -+ /* Wait reset completed */ -+ timeout = 500; -+ while (fsl_readl(&usb_dr_regs->usbcmd) & USB_CMD_CTRL_RESET) -+ udelay(1); -+ if (timeout <= 0) -+ ERR("%s - USBCMD_RST never clear. Timeout is %d \n", -+ __FUNCTION__, timeout); -+} -+ -+/* Call suspend/resume routines in host driver */ -+int fsl_otg_start_host(struct otg_fsm *fsm, int on) -+{ -+ struct otg_transceiver *xceiv = fsm->transceiver; -+ struct device *dev; -+ struct fsl_otg *otg_dev = container_of(xceiv, struct fsl_otg, otg); -+ u32 retval = 0; -+ -+ if (!xceiv->host) -+ return -ENODEV; -+ -+ dev = xceiv->host->controller; -+ -+ /* -+ * Update a_vbus_vld state as a_vbus_vld int is disabled -+ * in device mode -+ */ -+ fsm->a_vbus_vld = -+ !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID); -+ if (on) { -+ /* start fsl usb host controller */ -+ if (otg_dev->host_working) -+ goto end; -+ else { -+ otg_reset_controller(); -+ VDBG("host on......\n"); -+ if (dev->driver->resume) { -+ retval = dev->driver->resume(dev); -+ if (fsm->id) { -+ /* default-b */ -+ fsl_otg_drv_vbus(1); -+ /* Workaround: b_host can't driver -+ * vbus, but PP in PORTSC needs to -+ * be 1 for host to work. -+ * So we set drv_vbus bit in -+ * transceiver to 0 thru ULPI. */ -+ write_ulpi(0x0c, 0x20); -+ } -+ } -+ -+ otg_dev->host_working = 1; -+ } -+ } else { -+ /* stop fsl usb host controller */ -+ if (!otg_dev->host_working) -+ goto end; -+ else { -+ VDBG("host off......\n"); -+ if (dev && dev->driver) { -+ retval = dev->driver->suspend(dev, PMSG_SUSPEND); -+ if (fsm->id) -+ /* default-b */ -+ fsl_otg_drv_vbus(0); -+ } -+ otg_dev->host_working = 0; -+ } -+ } -+end: -+ return retval; -+} -+ -+/* -+ * Call suspend and resume function in udc driver -+ * to stop and start udc driver. -+ */ -+int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) -+{ -+ struct otg_transceiver *xceiv = fsm->transceiver; -+ struct device *dev; -+ -+ VDBG("DDD fsm=%p xceiv=%p\n", fsm, xceiv); -+ if (!xceiv->gadget || !xceiv->gadget->dev.parent) -+ return -ENODEV; -+ -+ VDBG("DDD xceiv=%p xceiv->gadget=%p parent=%p\n", xceiv, xceiv->gadget, -+ xceiv->gadget->dev.parent); -+ -+ VDBG("gadget %s\n", on ? "on" : "off"); -+ /* DDD dump_state("starting gadget", fsm); */ -+ -+ dev = xceiv->gadget->dev.parent; -+ -+ if (on) -+ dev->driver->resume(dev); -+ else -+ dev->driver->suspend(dev, PMSG_SUSPEND); -+ -+ return 0; -+} -+ -+#if 0 -+static void fsl_otg_enable(struct otg_transceiver *otg_p) -+{ -+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); -+ struct otg_fsm *fsm = &(otg_dev)->fsm; -+ u32 otg_sc; -+ -+ /* DDD VDBG(""); */ -+ /* enable OTG interrupt */ -+ otg_sc = fsl_readl(&usb_dr_regs->otgsc); -+ otg_sc |= OTGSC_INTERRUPT_ENABLE_BITS_MASK; -+ otg_sc &= ~OTGSC_IE_1ms_TIMER; -+ otg_sc &= ~OTGSC_CTRL_VBUS_DISCHARGE; -+ otg_sc |= OTGSC_IE_USB_ID; -+ fsl_writel(otg_sc, &usb_dr_regs->otgsc); -+ -+ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; -+ -+ if (fsm->id) { -+ otg_p->state = OTG_STATE_UNDEFINED; -+ } else { -+ otg_p->state = OTG_STATE_A_IDLE; -+ } -+ -+ otg_p->default_a = (fsm->id == 0); -+ otg_p->host->is_b_host = fsm->id; -+ otg_p->gadget->is_a_peripheral = !fsm->id; -+ -+ fsm->a_vbus_vld = 1; -+ -+ fsm->b_sess_vld = (otg_sc & OTGSC_STS_B_SESSION_VALID) ? 1 : 0; -+ fsm->a_sess_vld = (otg_sc & OTGSC_STS_A_SESSION_VALID) ? 1 : 0; -+ fsm->b_sess_end = (otg_sc & OTGSC_STS_B_SESSION_END) ? 1 : 0; -+} -+#endif -+ -+/* -+ * Called by initialization code of host driver. Register host controller -+ * to the OTG. Suspend host for OTG role detection. -+ */ -+static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host) -+{ -+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); -+ -+ if (!otg_p || otg_dev != fsl_otg_dev) -+ return -ENODEV; -+ -+ otg_p->host = host; -+ -+ otg_dev->fsm.a_bus_drop = 0; -+ otg_dev->fsm.a_bus_req = 1; -+ -+ if (host) { -+ VDBG("host off......\n"); -+ -+ otg_p->host->otg_port = fsl_otg_initdata.otg_port; -+ otg_p->host->is_b_host = otg_dev->fsm.id; -+ /* must leave time for khubd to finish its thing -+ * before yanking the host driver out from under it, -+ * so suspend the host after a short delay. -+ */ -+ otg_dev->host_working = 1; -+ schedule_delayed_work(&otg_dev->otg_event, 100); -+ return 0; -+ } else { /* host driver going away */ -+ -+ if (!(le32_to_cpu(otg_dev->dr_mem_map->otgsc) & -+ OTGSC_STS_USB_ID)) { -+ /* Mini-A cable connected */ -+ struct otg_fsm *fsm = &otg_dev->fsm; -+ -+ otg_p->state = OTG_STATE_UNDEFINED; -+ fsm->protocol = PROTO_UNDEF; -+ } -+ } -+ -+ otg_dev->host_working = 0; -+ -+ otg_statemachine(&otg_dev->fsm); -+ -+ return 0; -+} -+ -+/* Called by initialization code of udc. Register udc to OTG.*/ -+static int fsl_otg_set_peripheral(struct otg_transceiver *otg_p, -+ struct usb_gadget *gadget) -+{ -+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); -+ -+ VDBG("\n"); -+ -+ if (!otg_p || otg_dev != fsl_otg_dev) -+ return -ENODEV; -+ -+ if (!gadget) { -+ if (!otg_dev->otg.default_a) -+ otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0); -+ usb_gadget_vbus_disconnect(otg_dev->otg.gadget); -+ otg_dev->otg.gadget = 0; -+ otg_dev->fsm.b_bus_req = 0; -+ otg_statemachine(&otg_dev->fsm); -+ return 0; -+ } -+ -+ otg_p->gadget = gadget; -+ otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id; -+ -+ otg_dev->fsm.b_bus_req = 1; -+ -+ /* start the gadget right away if the ID pin says Mini-B */ -+ DBG("ID pin=%d\n", otg_dev->fsm.id); -+ if (otg_dev->fsm.id == 1) { -+ fsl_otg_start_host(&otg_dev->fsm, 0); -+ fsl_otg_drv_vbus(0); -+ fsl_otg_start_gadget(&otg_dev->fsm, 1); -+ } -+ -+ return 0; -+} -+ -+/* Set OTG port power, only for B-device */ -+static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA) -+{ -+ if (!fsl_otg_dev) -+ return -ENODEV; -+ if (otg_p->state == OTG_STATE_B_PERIPHERAL) -+ printk(KERN_DEBUG "FSL OTG:Draw %d mA\n", mA); -+ -+ return 0; -+} -+ -+/* Delayed pin detect interrupt processing. -+ * -+ * When the Mini-A cable is disconnected from the board, -+ * the pin-detect interrupt happens before the disconnnect -+ * interrupts for the connected device(s). In order to -+ * process the disconnect interrupt(s) prior to switching -+ * roles, the pin-detect interrupts are delayed, and handled -+ * by this routine. -+ */ -+static void fsl_otg_event(struct work_struct *work) -+{ -+ struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work); -+ struct otg_fsm *fsm = &og->fsm; -+ -+ VDBG("DDD fsm->id=%d\n", fsm->id); -+ if (fsm->id) { /* switch to gadget */ -+ fsl_otg_start_host(fsm, 0); -+ fsl_otg_drv_vbus(0); -+ fsl_otg_start_gadget(fsm, 1); -+ } -+} -+ -+/* B-device start SRP */ -+static int fsl_otg_start_srp(struct otg_transceiver *otg_p) -+{ -+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); -+ -+ if (!otg_p || otg_dev != fsl_otg_dev -+ || otg_p->state != OTG_STATE_B_IDLE) -+ return -ENODEV; -+ -+ otg_dev->fsm.b_bus_req = 1; -+ otg_statemachine(&otg_dev->fsm); -+ -+ return 0; -+} -+ -+/* A_host suspend will call this function to start hnp */ -+static int fsl_otg_start_hnp(struct otg_transceiver *otg_p) -+{ -+ struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg); -+ -+ if (!otg_p || otg_dev != fsl_otg_dev) -+ return -ENODEV; -+ -+ VDBG("start_hnp.............\n"); -+ /* clear a_bus_req to enter a_suspend state */ -+ otg_dev->fsm.a_bus_req = 0; -+ otg_statemachine(&otg_dev->fsm); -+ -+ return 0; -+} -+ -+/* -+ * Interrupt handler. OTG/host/peripheral share the same int line. -+ * OTG driver clears OTGSC interrupts and leaves USB interrupts -+ * intact. It needs to have knowledge of some USB interrupts -+ * such as port change. -+ */ -+irqreturn_t fsl_otg_isr(int irq, void *dev_id) -+{ -+ struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm; -+ struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg; -+ u32 otg_int_src, otg_sc; -+ -+ otg_sc = fsl_readl(&usb_dr_regs->otgsc); -+ otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8); -+ -+ /* Only clear otg interrupts */ -+ fsl_writel(otg_sc, &usb_dr_regs->otgsc); -+ -+ /*FIXME: ID change not generate when init to 0 */ -+ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; -+ otg->default_a = (fsm->id == 0); -+ -+ /* process OTG interrupts */ -+ if (otg_int_src) { -+ VDBG("\nOTG irq 0x%08x\n", otg_int_src); -+ -+ if (otg_int_src & OTGSC_INTSTS_USB_ID) { -+ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; -+ otg->default_a = (fsm->id == 0); -+ /* clear conn information */ -+ if (fsm->id) -+ fsm->b_conn = 0; -+ else -+ fsm->a_conn = 0; -+ -+ if (otg->host) -+ otg->host->is_b_host = fsm->id; -+ if (otg->gadget) -+ otg->gadget->is_a_peripheral = !fsm->id; -+ VDBG("ID int (ID is %d)\n", fsm->id); -+ -+ if (fsm->id) { /* switch to gadget */ -+ schedule_delayed_work(&((struct fsl_otg *) -+ dev_id)->otg_event, 25); -+ } else { /* switch to host */ -+ cancel_delayed_work(& -+ ((struct fsl_otg *)dev_id)-> -+ otg_event); -+ fsl_otg_start_gadget(fsm, 0); -+ fsl_otg_drv_vbus(1); -+ fsl_otg_start_host(fsm, 1); -+ } -+ -+ return IRQ_HANDLED; -+ } -+ } -+ -+ return IRQ_NONE; -+} -+ -+ -+static struct otg_fsm_ops fsl_otg_ops = { -+ .chrg_vbus = fsl_otg_chrg_vbus, -+ .drv_vbus = fsl_otg_drv_vbus, -+ .loc_conn = fsl_otg_loc_conn, -+ .loc_sof = fsl_otg_loc_sof, -+ .start_pulse = fsl_otg_start_pulse, -+ -+ .add_timer = fsl_otg_add_timer, -+ .del_timer = fsl_otg_del_timer, -+ -+ .start_host = fsl_otg_start_host, -+ .start_gadget = fsl_otg_start_gadget, -+}; -+ -+/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */ -+int fsl_otg_cfg(struct platform_device *pdev) -+{ -+ int status; -+ struct fsl_otg *fsl_otg_tc; -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ struct resource *res; -+ -+ DBG("\n"); -+ -+ if (fsl_otg_dev) -+ return 0; -+ -+ /* allocate space to fsl otg device */ -+ fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL); -+ if (!fsl_otg_tc) -+ return -ENODEV; -+ -+ if (pdata->regs) { -+ fsl_otg_tc->dr_mem_map = pdata->regs; -+ } else { -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no register addr.\n"); -+ return -ENODEV; -+ } -+ -+ /* -+ printk("DDD %s(): rsrc_start=0x%x rsrc_len=0x%x\n", -+ __FUNCTION__, res->start, res->end - res->start + 1); -+ */ -+ -+ if (!request_mem_region(res->start, res->end - res->start + 1, -+ "OTG")) { -+ dev_dbg(&pdev->dev, "request_mem_region failed\n"); -+ return -EBUSY; -+ } -+ fsl_otg_tc->dr_mem_map = ioremap(res->start, -+ res->end - res->start + 1); -+ } -+ DBG("set dr_mem_map to 0x%p\n", fsl_otg_tc->dr_mem_map); -+ -+ INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event); -+ -+ INIT_LIST_HEAD(&active_timers); -+ fsl_otg_init_timers(&fsl_otg_tc->fsm); -+ -+ /* Set OTG state machine operations */ -+ fsl_otg_tc->fsm.ops = &fsl_otg_ops; -+ -+ /* record initial state of ID pin */ -+ fsl_otg_tc->fsm.id = (fsl_otg_tc->dr_mem_map->otgsc & OTGSC_STS_USB_ID) -+ ? 1 : 0; -+ DBG("initial ID pin=%d\n", fsl_otg_tc->fsm.id); -+ -+ /* initialize the otg structure */ -+ fsl_otg_tc->otg.label = DRIVER_DESC; -+ fsl_otg_tc->otg.set_host = fsl_otg_set_host; -+ fsl_otg_tc->otg.set_peripheral = fsl_otg_set_peripheral; -+ fsl_otg_tc->otg.set_power = fsl_otg_set_power; -+ fsl_otg_tc->otg.start_hnp = fsl_otg_start_hnp; -+ fsl_otg_tc->otg.start_srp = fsl_otg_start_srp; -+ -+ fsl_otg_dev = fsl_otg_tc; -+ -+ /* Store the otg transceiver */ -+ status = otg_set_transceiver(&fsl_otg_tc->otg); -+ if (status) { -+ printk(KERN_WARNING ": unable to register OTG transceiver.\n"); -+ return status; -+ } -+ -+ return 0; -+} -+ -+/* OTG Initialization*/ -+int usb_otg_start(struct platform_device *pdev) -+{ -+ struct fsl_otg *p_otg; -+ struct otg_transceiver *otg_trans = otg_get_transceiver(); -+ struct otg_fsm *fsm; -+ int status; -+ u32 temp; -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ int timeout; -+ -+ DBG("\n"); -+ -+ p_otg = container_of(otg_trans, struct fsl_otg, otg); -+ fsm = &p_otg->fsm; -+ -+ /* Initialize the state machine structure with default values */ -+ SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED); -+ fsm->transceiver = &p_otg->otg; -+ -+ usb_dr_regs = p_otg->dr_mem_map; -+ DBG("set usb_dr_regs to 0x%p\n", usb_dr_regs); -+ -+ /* request irq */ -+ p_otg->irq = platform_get_irq(pdev, 0); -+ status = request_irq(p_otg->irq, fsl_otg_isr, -+ IRQF_SHARED, driver_name, p_otg); -+ if (status) { -+ dev_dbg(p_otg->otg.dev, "can't get IRQ %d, error %d\n", -+ p_otg->irq, status); -+ kfree(p_otg); -+ return status; -+ } -+ -+ -+ /* stop the controller */ -+ temp = fsl_readl(&usb_dr_regs->usbcmd) & ~USB_CMD_RUN_STOP; -+ fsl_writel(temp, &usb_dr_regs->usbcmd); -+ -+ /* reset the controller */ -+ temp = fsl_readl(&usb_dr_regs->usbcmd); -+ temp |= USB_CMD_CTRL_RESET; -+ fsl_writel(temp, &usb_dr_regs->usbcmd); -+ -+ /* wait reset completed */ -+ timeout = 500; -+ while (timeout-- && -+ fsl_readl(&usb_dr_regs->usbcmd) & USB_CMD_CTRL_RESET) -+ udelay(1); -+ if (timeout <= 0) -+ ERR("%s - USBCMD_RST never clear. Timeout is %d \n", -+ __FUNCTION__, timeout); -+ -+ /* configure the VBUSHS as IDLE(both host and device) */ -+ temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USBMODE_ES : 0); -+ fsl_writel(temp, &usb_dr_regs->usbmode); -+ -+ /* configure PHY interface */ -+ temp = fsl_readl(&usb_dr_regs->portsc1); -+ temp &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PTW_8BIT); -+ -+ /* DDD wrong xcvr setting stuff follows */ -+ temp |= PORTSCX_PTS_ULPI; -+ fsl_writel(temp, &usb_dr_regs->portsc1); -+ -+ -+ /* disable all interrupt and clear all OTGSC status */ -+ temp = fsl_readl(&usb_dr_regs->otgsc); -+ temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK; -+ temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE; -+ fsl_writel(temp, &usb_dr_regs->otgsc); -+ -+ fsl_otg_drv_vbus(0); -+ -+ /* -+ * The identification (id) input is FALSE when a Mini-A plug is inserted -+ * in the devices Mini-AB receptacle. Otherwise, this input is TRUE. -+ * Also: record initial state of ID pin -+ */ -+ if (fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_USB_ID) { -+ p_otg->otg.state = OTG_STATE_UNDEFINED; -+ p_otg->fsm.id = 1; -+ } else { -+ p_otg->otg.state = OTG_STATE_A_IDLE; -+ p_otg->fsm.id = 0; -+ } -+ -+ DBG("initial ID pin=%d\n", p_otg->fsm.id); -+ -+ /* enable OTG ID pin interrupt */ -+ temp = fsl_readl(&usb_dr_regs->otgsc); -+ temp |= OTGSC_IE_USB_ID; -+ temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_IE_1ms_TIMER); -+ fsl_writel(temp, &usb_dr_regs->otgsc); -+ -+ return 0; -+} -+ -+/* Initialize board specific registers,PIB board,clock and pin multiplexing */ -+static int board_init(struct platform_device *pdev) -+{ -+ struct fsl_usb2_platform_data *pdata; -+ pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; -+ -+ /* -+ * do platform specific init: check the clock, grab/config pins, etc. -+ */ -+ if (pdata->platform_init(pdev) != 0) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+/*------------------------------------------------------------------------- -+ PROC File System Support -+-------------------------------------------------------------------------*/ -+#ifdef CONFIG_USB_OTG_DEBUG_FILES -+ -+#include <linux/seq_file.h> -+ -+static const char proc_filename[] = "driver/fsl_usb2_otg"; -+ -+static int otg_proc_read(char *page, char **start, off_t off, int count, -+ int *eof, void *_dev) -+{ -+ struct otg_fsm *fsm = &fsl_otg_dev->fsm; -+ char *buf = page; -+ char *next = buf; -+ unsigned size = count; -+ unsigned long flags; -+ int t; -+ u32 tmp_reg; -+ -+ if (off != 0) -+ return 0; -+ -+ spin_lock_irqsave(&fsm->lock, flags); -+ -+ /* ------basic driver infomation ---- */ -+ t = scnprintf(next, size, -+ DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n", -+ DRIVER_VERSION); -+ size -= t; -+ next += t; -+ -+ /* ------ Registers ----- */ -+ /* tmp_reg = le32_to_cpu(usb_dr_regs->otgsc); */ -+ tmp_reg = fsl_readl(&usb_dr_regs->otgsc); -+ t = scnprintf(next, size, "OTGSC reg: 0x%08x\n", tmp_reg); -+ size -= t; -+ next += t; -+ -+ /* tmp_reg = le32_to_cpu(usb_dr_regs->portsc); */ -+ tmp_reg = fsl_readl(&usb_dr_regs->portsc1); -+ t = scnprintf(next, size, "PORTSC reg: 0x%08x\n", tmp_reg); -+ size -= t; -+ next += t; -+ -+ /* tmp_reg = le32_to_cpu(usb_dr_regs->usbmode); */ -+ tmp_reg = fsl_readl(&usb_dr_regs->usbmode); -+ t = scnprintf(next, size, "USBMODE reg: 0x%08x\n", tmp_reg); -+ size -= t; -+ next += t; -+ -+ /* tmp_reg = le32_to_cpu(usb_dr_regs->usbcmd); */ -+ tmp_reg = fsl_readl(&usb_dr_regs->usbcmd); -+ t = scnprintf(next, size, "USBCMD reg: 0x%08x\n", tmp_reg); -+ size -= t; -+ next += t; -+ -+ /* tmp_reg = le32_to_cpu(usb_dr_regs->usbsts); */ -+ tmp_reg = fsl_readl(&usb_dr_regs->usbsts); -+ t = scnprintf(next, size, "USBSTS reg: 0x%08x\n", tmp_reg); -+ size -= t; -+ next += t; -+ -+ /* ------ State ----- */ -+ t = scnprintf(next, size, "FSM protocol=%d %s\n", fsm->protocol, -+ fsm->protocol ? -+ (fsm->protocol == PROTO_HOST ? "Host" : "Gadget") -+ : "None"); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, -+ "OTG state: %s\n\n", -+ state_string(fsl_otg_dev->otg.state)); -+ size -= t; -+ next += t; -+ -+ /* ------ State Machine Variables ----- */ -+ t = scnprintf(next, size, "a_bus_req: %d\n", fsm->a_bus_req); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "b_bus_req: %d\n", fsm->b_bus_req); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "a_bus_resume: %d\n", fsm->a_bus_resume); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "a_bus_suspend: %d\n", fsm->a_bus_suspend); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "a_conn: %d\n", fsm->a_conn); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "a_sess_vld: %d\n", fsm->a_sess_vld); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "a_srp_det: %d\n", fsm->a_srp_det); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "a_vbus_vld: %d\n", fsm->a_vbus_vld); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "b_bus_resume: %d\n", fsm->b_bus_resume); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "b_bus_suspend: %d\n", fsm->b_bus_suspend); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "b_conn: %d\n", fsm->b_conn); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "b_se0_srp: %d\n", fsm->b_se0_srp); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "b_sess_end: %d\n", fsm->b_sess_end); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "b_sess_vld: %d\n", fsm->b_sess_vld); -+ size -= t; -+ next += t; -+ -+ t = scnprintf(next, size, "id: %d\n", fsm->id); -+ size -= t; -+ next += t; -+ -+ spin_unlock_irqrestore(&fsm->lock, flags); -+ -+ *eof = 1; -+ return count - size; -+} -+ -+#define create_proc_file() create_proc_read_entry(proc_filename, \ -+ 0, NULL, otg_proc_read, NULL) -+ -+#define remove_proc_file() remove_proc_entry(proc_filename, NULL) -+ -+#else /* !CONFIG_USB_OTG_DEBUG_FILES */ -+ -+#define create_proc_file() do {} while (0) -+#define remove_proc_file() do {} while (0) -+ -+#endif /*CONFIG_USB_OTG_DEBUG_FILES */ -+ -+/*----------------------------------------------------------*/ -+/* Char driver interface to control some OTG input */ -+ -+/* -+ * This function handle some ioctl command,such as get otg -+ * status and set host suspend -+ */ -+static int fsl_otg_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ u32 retval = 0; -+ -+ switch (cmd) { -+ case GET_OTG_STATUS: -+ retval = fsl_otg_dev->host_working; -+ break; -+ -+ case SET_A_SUSPEND_REQ: -+ fsl_otg_dev->fsm.a_suspend_req = arg; -+ break; -+ -+ case SET_A_BUS_DROP: -+ fsl_otg_dev->fsm.a_bus_drop = arg; -+ break; -+ -+ case SET_A_BUS_REQ: -+ fsl_otg_dev->fsm.a_bus_req = arg; -+ break; -+ -+ case SET_B_BUS_REQ: -+ fsl_otg_dev->fsm.b_bus_req = arg; -+ break; -+ -+ default: -+ break; -+ } -+ -+ otg_statemachine(&fsl_otg_dev->fsm); -+ -+ return retval; -+} -+ -+static int fsl_otg_open(struct inode *inode, struct file *file) -+{ -+ -+ return 0; -+} -+ -+static int fsl_otg_release(struct inode *inode, struct file *file) -+{ -+ -+ return 0; -+} -+ -+static struct file_operations otg_fops = { -+ .owner = THIS_MODULE, -+ .llseek = NULL, -+ .read = NULL, -+ .write = NULL, -+ .ioctl = fsl_otg_ioctl, -+ .open = fsl_otg_open, -+ .release = fsl_otg_release, -+}; -+ -+static int __init fsl_otg_probe(struct platform_device *pdev) -+{ -+ int status; -+ struct fsl_usb2_platform_data *pdata; -+ -+ DBG("pdev=0x%p\n", pdev); -+ -+ if (!pdev) -+ return -ENODEV; -+ -+ if (!pdev->dev.platform_data) -+ return -ENOMEM; -+ -+ pdata = pdev->dev.platform_data; -+ /* Initialize the clock, multiplexing pin and PHY interface */ -+ board_init(pdev); -+ -+ /* configure the OTG */ -+ status = fsl_otg_cfg(pdev); -+ if (status) { -+ printk(KERN_INFO "Couldn't init OTG module\n"); -+ return -status; -+ } -+ -+ /* start OTG */ -+ status = usb_otg_start(pdev); -+ -+ if (register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops)) { -+ printk(KERN_WARNING FSL_OTG_NAME -+ ": unable to register FSL OTG device\n"); -+ return -EIO; -+ } -+ -+ create_proc_file(); -+ return status; -+} -+ -+static int fsl_otg_remove(struct platform_device *pdev) -+{ -+ u32 ie; -+ struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -+ unsigned long flags; -+ -+ DBG("pdev=0x%p pdata=0x%p\n", pdev, pdata); -+ -+ otg_set_transceiver(NULL); -+ -+ /* disable and clear OTGSC interrupts */ -+ spin_lock_irqsave(&usb_dr_regs_lock, flags); -+ ie = fsl_readl(&usb_dr_regs->otgsc); -+ ie &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK; -+ ie |= OTGSC_INTERRUPT_STATUS_BITS_MASK; -+ fsl_writel(ie, &usb_dr_regs->otgsc); -+ spin_unlock_irqrestore(&usb_dr_regs_lock, flags); -+ -+ free_irq(fsl_otg_dev->irq, fsl_otg_dev); -+ -+ kfree(fsl_otg_dev); -+ -+ remove_proc_file(); -+ -+ unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME); -+ -+ if (pdata->platform_uninit) -+ pdata->platform_uninit(pdev); -+ -+ fsl_otg_dev = NULL; -+ return 0; -+} -+ -+struct platform_driver fsl_otg_driver = { -+ .probe = fsl_otg_probe, -+ .remove = fsl_otg_remove, -+ .driver = { -+ .name = driver_name, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int __init fsl_usb_otg_init(void) -+{ -+ printk(KERN_INFO DRIVER_DESC " loaded, %s\n", DRIVER_VERSION); -+ return platform_driver_register(&fsl_otg_driver); -+} -+ -+static void __exit fsl_usb_otg_exit(void) -+{ -+ platform_driver_unregister(&fsl_otg_driver); -+} -+ -+module_init(fsl_usb_otg_init); -+module_exit(fsl_usb_otg_exit); -+ -+MODULE_DESCRIPTION(DRIVER_INFO); -+MODULE_AUTHOR(DRIVER_AUTHOR); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/usb/otg/fsl_otg.h -@@ -0,0 +1,139 @@ -+/* -+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+#ifndef FSL_OTG_H -+#define FSL_OTG_H -+#include <linux/usb/otg.h> -+#include "otg_fsm.h" -+#include <linux/ioctl.h> -+ -+#define ERR(format, arg...) \ -+printk(KERN_ERR "%s:%s: " format "\n" , __FILE__, __FUNCTION__ , ## arg) -+ -+/* -+ * A-DEVICE timing constants -+ */ -+ -+/* Wait for VBUS Rise */ -+#define TA_WAIT_VRISE (100) /* a_wait_vrise 100 ms, section: 6.6.5.1 */ -+ -+/* Wait for B-Connect */ -+#define TA_WAIT_BCON (10000) /* a_wait_bcon > 1 sec, section: 6.6.5.2 -+ * This is only used to get out of -+ * OTG_STATE_A_WAIT_BCON state if there was -+ * no connection for these many milliseconds -+ */ -+ -+/* A-Idle to B-Disconnect */ -+/* It is necessary for this timer to be more than 750 ms because of a bug in OPT -+ * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated -+ * in the test description -+ */ -+#define TA_AIDL_BDIS (5000) /* a_suspend minimum 200 ms, section: 6.6.5.3 */ -+ -+/* B-Idle to A-Disconnect */ -+#define TA_BIDL_ADIS (12) /* 3 to 200 ms */ -+ -+/* B-device timing constants */ -+ -+/* Data-Line Pulse Time*/ -+#define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms, section:5.3.3 */ -+#define TB_DATA_PLS_MIN (5) /* minimum 5 ms */ -+#define TB_DATA_PLS_MAX (10) /* maximum 10 ms */ -+ -+/* SRP Initiate Time */ -+#define TB_SRP_INIT (100) /* b_srp_init,maximum 100 ms, section:5.3.8 */ -+ -+/* SRP Fail Time */ -+#define TB_SRP_FAIL (7000) /* b_srp_init,Fail time 5~30s, section:6.8.2.2 */ -+ -+/* SRP result wait time */ -+#define TB_SRP_WAIT (60) -+ -+/* VBus time */ -+#define TB_VBUS_PLS (30) /* time to keep vbus pulsing asserted */ -+ -+/* Discharge time */ -+/* This time should be less than 10ms. It varies from system to system. */ -+#define TB_VBUS_DSCHRG (8) -+ -+/* A-SE0 to B-Reset */ -+#define TB_ASE0_BRST (20) /* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */ -+ -+/* A bus suspend timer before we can switch to b_wait_aconn */ -+#define TB_A_SUSPEND (7) -+#define TB_BUS_RESUME (12) -+ -+/* SE0 Time Before SRP */ -+#define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */ -+ -+#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate) -+ -+ -+struct fsl_otg_timer { -+ unsigned long expires; /* Number of count increase to timeout */ -+ unsigned long count; /* Tick counter */ -+ void (*function) (unsigned long); /* Timeout function */ -+ unsigned long data; /* Data passed to function */ -+ struct list_head list; -+}; -+ -+struct fsl_otg_timer inline *otg_timer_initializer -+ (void (*function) (unsigned long), unsigned long expires, -+ unsigned long data) { -+ struct fsl_otg_timer *timer; -+ timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL); -+ if (timer == NULL) -+ return NULL; -+ timer->function = function; -+ timer->expires = expires; -+ timer->data = data; -+ return timer; -+} -+ -+struct fsl_otg { -+ struct otg_transceiver otg; -+ struct otg_fsm fsm; -+ struct fsl_usb_device_regs *dr_mem_map; -+ struct delayed_work otg_event; -+ -+ /*used for usb host */ -+ u8 host_working; -+ u8 on_off; -+ -+ int irq; -+}; -+ -+struct fsl_otg_config { -+ u8 otg_port; -+}; -+ -+/*For SRP and HNP handle*/ -+#define FSL_OTG_MAJOR 66 -+#define FSL_OTG_NAME "fsl-otg" -+/*Command to OTG driver(ioctl)*/ -+#define OTG_IOCTL_MAGIC FSL_OTG_MAJOR -+/*if otg work as host,it should return 1,otherwise it return 0*/ -+#define GET_OTG_STATUS _IOR(OTG_IOCTL_MAGIC, 1, int) -+#define SET_A_SUSPEND_REQ _IOW(OTG_IOCTL_MAGIC, 2, int) -+#define SET_A_BUS_DROP _IOW(OTG_IOCTL_MAGIC, 3, int) -+#define SET_A_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 4, int) -+#define SET_B_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 5, int) -+#define GET_A_SUSPEND_REQ _IOR(OTG_IOCTL_MAGIC, 6, int) -+#define GET_A_BUS_DROP _IOR(OTG_IOCTL_MAGIC, 7, int) -+#define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int) -+#define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int) -+ -+ -+/********************************************************************/ -+#endif ---- /dev/null -+++ b/drivers/usb/otg/Makefile -@@ -0,0 +1,5 @@ -+# -+# Makefile for USB OTG controller driver -+# -+fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o -+obj-y += fsl_usb2_otg.o ---- /dev/null -+++ b/drivers/usb/otg/otg_fsm.c -@@ -0,0 +1,381 @@ -+/* OTG Finite State Machine from OTG spec -+ * -+ * Copyright (C) 2007 Freescale Semiconductor, Inc. -+ * -+ * Author: Li Yang <LeoLi@freescale.com> -+ * Jerry Huang <Chang-Ming.Huang@freescale.com> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/usb/otg.h> -+#include <linux/spinlock.h> -+#include <linux/delay.h> -+#include <linux/usb.h> -+#include <linux/usb_gadget.h> -+ -+#include "otg_fsm.h" -+ -+ -+/* Defined by device specific driver, for different timer implementation */ -+extern void *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr, -+ *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, *a_wait_enum_tmr; -+ -+const char *state_string(enum usb_otg_state state) -+{ -+ switch (state) { -+ case OTG_STATE_A_IDLE: return "a_idle"; -+ case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise"; -+ case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon"; -+ case OTG_STATE_A_HOST: return "a_host"; -+ case OTG_STATE_A_SUSPEND: return "a_suspend"; -+ case OTG_STATE_A_PERIPHERAL: return "a_peripheral"; -+ case OTG_STATE_A_WAIT_VFALL: return "a_wait_vfall"; -+ case OTG_STATE_A_VBUS_ERR: return "a_vbus_err"; -+ case OTG_STATE_B_IDLE: return "b_idle"; -+ case OTG_STATE_B_SRP_INIT: return "b_srp_init"; -+ case OTG_STATE_B_PERIPHERAL: return "b_peripheral"; -+ case OTG_STATE_B_WAIT_ACON: return "b_wait_acon"; -+ case OTG_STATE_B_HOST: return "b_host"; -+ default: return "UNDEFINED"; -+ } -+} -+EXPORT_SYMBOL(state_string); -+ -+/* Change USB protocol when there is a protocol change */ -+static int otg_set_protocol(struct otg_fsm *fsm, int protocol) -+{ -+ int ret = 0; -+ -+ VDBG("DDD old fsm->protocol= %d; new protocol= %d\n", -+ fsm->protocol, protocol); -+ if (fsm->protocol != protocol) { -+ VDBG("Changing role fsm->protocol= %d; new protocol= %d\n", -+ fsm->protocol, protocol); -+ /* stop old protocol */ -+ if (fsm->protocol == PROTO_HOST) -+ ret = fsm->ops->start_host(fsm, 0); -+ else if (fsm->protocol == PROTO_GADGET) -+ ret = fsm->ops->start_gadget(fsm, 0); -+ if (ret) -+ return ret; -+ -+ /* start new protocol */ -+ if (protocol == PROTO_HOST) -+ ret = fsm->ops->start_host(fsm, 1); -+ else if (protocol == PROTO_GADGET) -+ ret = fsm->ops->start_gadget(fsm, 1); -+ if (ret) -+ return ret; -+ -+ fsm->protocol = protocol; -+ return 0; -+ } -+ -+ return 0; -+} -+ -+static int state_changed; -+ -+/* Called when leaving a state. Do state clean up jobs here */ -+static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) -+{ -+ switch (old_state) { -+ case OTG_STATE_B_IDLE: -+ otg_del_timer(fsm, fsm->b_se0_srp_tmr); -+ fsm->b_se0_srp = 0; -+ break; -+ case OTG_STATE_B_SRP_INIT: -+ fsm->b_srp_done = 0; -+ break; -+ case OTG_STATE_B_PERIPHERAL: -+ break; -+ case OTG_STATE_B_WAIT_ACON: -+ otg_del_timer(fsm, fsm->b_ase0_brst_tmr); -+ fsm->b_ase0_brst_tmout = 0; -+ break; -+ case OTG_STATE_B_HOST: -+ break; -+ case OTG_STATE_A_IDLE: -+ break; -+ case OTG_STATE_A_WAIT_VRISE: -+ otg_del_timer(fsm, fsm->a_wait_vrise_tmr); -+ fsm->a_wait_vrise_tmout = 0; -+ break; -+ case OTG_STATE_A_WAIT_BCON: -+ otg_del_timer(fsm, fsm->a_wait_bcon_tmr); -+ fsm->a_wait_bcon_tmout = 0; -+ break; -+ case OTG_STATE_A_HOST: -+ otg_del_timer(fsm, fsm->a_wait_enum_tmr); -+ break; -+ case OTG_STATE_A_SUSPEND: -+ otg_del_timer(fsm, fsm->a_aidl_bdis_tmr); -+ fsm->a_aidl_bdis_tmout = 0; -+ fsm->a_suspend_req = 0; -+ fsm->a_bus_req = 1; /* FIXME */ -+ break; -+ case OTG_STATE_A_PERIPHERAL: -+ break; -+ case OTG_STATE_A_WAIT_VFALL: -+ otg_del_timer(fsm, fsm->a_wait_vrise_tmr); -+ break; -+ case OTG_STATE_A_VBUS_ERR: -+ break; -+ default: -+ break; -+ } -+} -+ -+/* Called when entering a state */ -+static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) -+{ -+ state_changed = 1; -+ VDBG("State: old=%s new=%s \n", -+ state_string(fsm->transceiver->state), state_string(new_state)); -+ -+ if (fsm->transceiver->state == new_state) -+ return 0; -+ -+ otg_leave_state(fsm, fsm->transceiver->state); -+ switch (new_state) { -+ case OTG_STATE_B_IDLE: -+ otg_drv_vbus(fsm, 0); -+ otg_chrg_vbus(fsm, 0); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_UNDEF); -+ otg_add_timer(fsm, fsm->b_se0_srp_tmr); -+ break; -+ case OTG_STATE_B_SRP_INIT: -+ otg_start_pulse(fsm); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_UNDEF); -+ otg_add_timer(fsm, fsm->b_srp_fail_tmr); -+ break; -+ case OTG_STATE_B_PERIPHERAL: -+ otg_chrg_vbus(fsm, 0); -+ otg_loc_conn(fsm, 1); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_GADGET); -+ break; -+ case OTG_STATE_B_WAIT_ACON: -+ otg_chrg_vbus(fsm, 0); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_HOST); -+ otg_add_timer(fsm, fsm->b_ase0_brst_tmr); -+ fsm->a_bus_suspend = 0; -+ break; -+ case OTG_STATE_B_HOST: -+ otg_chrg_vbus(fsm, 0); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 1); -+ otg_set_protocol(fsm, PROTO_HOST); -+ usb_bus_start_enum(fsm->transceiver->host, -+ fsm->transceiver->host->otg_port); -+ break; -+ case OTG_STATE_A_IDLE: -+ otg_drv_vbus(fsm, 0); -+ otg_chrg_vbus(fsm, 0); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_HOST); -+ break; -+ case OTG_STATE_A_WAIT_VRISE: -+ otg_drv_vbus(fsm, 1); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_HOST); -+ otg_add_timer(fsm, fsm->a_wait_vrise_tmr); -+ break; -+ case OTG_STATE_A_WAIT_BCON: -+ otg_drv_vbus(fsm, 1); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_HOST); -+ otg_add_timer(fsm, fsm->a_wait_bcon_tmr); -+ break; -+ case OTG_STATE_A_HOST: -+ otg_drv_vbus(fsm, 1); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 1); -+ otg_set_protocol(fsm, PROTO_HOST); -+ /* -+ * When HNP is triggered while a_bus_req = 0, a_host will -+ * suspend too fast to complete a_set_b_hnp_en -+ */ -+ if (!fsm->a_bus_req || fsm->a_suspend_req) -+ otg_add_timer(fsm, fsm->a_wait_enum_tmr); -+ break; -+ case OTG_STATE_A_SUSPEND: -+ otg_drv_vbus(fsm, 1); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_HOST); -+ otg_add_timer(fsm, fsm->a_aidl_bdis_tmr); -+ -+ break; -+ case OTG_STATE_A_PERIPHERAL: -+ otg_loc_conn(fsm, 1); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_GADGET); -+ otg_drv_vbus(fsm, 1); -+ break; -+ case OTG_STATE_A_WAIT_VFALL: -+ otg_drv_vbus(fsm, 0); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_HOST); -+ break; -+ case OTG_STATE_A_VBUS_ERR: -+ otg_drv_vbus(fsm, 0); -+ otg_loc_conn(fsm, 0); -+ otg_loc_sof(fsm, 0); -+ otg_set_protocol(fsm, PROTO_UNDEF); -+ break; -+ default: -+ break; -+ } -+ -+ fsm->transceiver->state = new_state; -+ return 0; -+} -+ -+/* State change judgement */ -+int otg_statemachine(struct otg_fsm *fsm) -+{ -+ enum usb_otg_state state; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&fsm->lock, flags); -+ -+ state = fsm->transceiver->state; -+ state_changed = 0; -+ /* State machine state change judgement */ -+ -+ VDBG(" State: %s \n", state_string(state)); -+ -+ switch (state) { -+ case OTG_STATE_UNDEFINED: -+ if (fsm->id) -+ otg_set_state(fsm, OTG_STATE_B_IDLE); -+ else -+ otg_set_state(fsm, OTG_STATE_A_IDLE); -+ break; -+ case OTG_STATE_B_IDLE: -+ if (!fsm->id) -+ otg_set_state(fsm, OTG_STATE_A_IDLE); -+ else if (fsm->b_sess_vld && fsm->transceiver->gadget) -+ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); -+ else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp) -+ otg_set_state(fsm, OTG_STATE_B_SRP_INIT); -+ break; -+ case OTG_STATE_B_SRP_INIT: -+ if (!fsm->id || fsm->b_srp_done) -+ otg_set_state(fsm, OTG_STATE_B_IDLE); -+ break; -+ case OTG_STATE_B_PERIPHERAL: -+ if (!fsm->id || !fsm->b_sess_vld) -+ otg_set_state(fsm, OTG_STATE_B_IDLE); -+ else if (fsm->b_bus_req && -+ fsm->transceiver-> -+ gadget->b_hnp_enable && fsm->a_bus_suspend) -+ otg_set_state(fsm, OTG_STATE_B_WAIT_ACON); -+ break; -+ case OTG_STATE_B_WAIT_ACON: -+ if (fsm->a_conn) -+ otg_set_state(fsm, OTG_STATE_B_HOST); -+ else if (!fsm->id || !fsm->b_sess_vld) -+ otg_set_state(fsm, OTG_STATE_B_IDLE); -+ else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) { -+ fsm->b_ase0_brst_tmout = 0; -+ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); -+ } -+ break; -+ case OTG_STATE_B_HOST: -+ if (!fsm->id || !fsm->b_sess_vld) -+ otg_set_state(fsm, OTG_STATE_B_IDLE); -+ else if (!fsm->b_bus_req || !fsm->a_conn) -+ otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); -+ break; -+ case OTG_STATE_A_IDLE: -+ if (fsm->id) -+ otg_set_state(fsm, OTG_STATE_B_IDLE); -+ else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det)) -+ otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE); -+ break; -+ case OTG_STATE_A_WAIT_VRISE: -+ if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld || -+ fsm->a_wait_vrise_tmout) { -+ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); -+ } -+ break; -+ case OTG_STATE_A_WAIT_BCON: -+ if (!fsm->a_vbus_vld) -+ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); -+ else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout) -+ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); -+ else if (fsm->b_conn) -+ otg_set_state(fsm, OTG_STATE_A_HOST); -+ break; -+ case OTG_STATE_A_HOST: -+ if ((!fsm->a_bus_req || fsm->a_suspend_req) && -+ fsm->transceiver->host->b_hnp_enable) -+ otg_set_state(fsm, OTG_STATE_A_SUSPEND); -+ else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop) -+ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); -+ else if (!fsm->a_vbus_vld) -+ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); -+ break; -+ case OTG_STATE_A_SUSPEND: -+ if (!fsm->b_conn && fsm->transceiver->host->b_hnp_enable) -+ otg_set_state(fsm, OTG_STATE_A_PERIPHERAL); -+ else if (!fsm->b_conn && !fsm->transceiver->host->b_hnp_enable) -+ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); -+ else if (fsm->a_bus_req || fsm->b_bus_resume) -+ otg_set_state(fsm, OTG_STATE_A_HOST); -+ else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout) -+ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); -+ else if (!fsm->a_vbus_vld) -+ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); -+ break; -+ case OTG_STATE_A_PERIPHERAL: -+ if (fsm->id || fsm->a_bus_drop) -+ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); -+ else if (fsm->b_bus_suspend) -+ otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); -+ else if (!fsm->a_vbus_vld) -+ otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); -+ break; -+ case OTG_STATE_A_WAIT_VFALL: -+ if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld && -+ !fsm->b_conn)) -+ otg_set_state(fsm, OTG_STATE_A_IDLE); -+ break; -+ case OTG_STATE_A_VBUS_ERR: -+ if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err) -+ otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); -+ break; -+ default: -+ break; -+ } -+ spin_unlock_irqrestore(&fsm->lock, flags); -+ -+ return state_changed; -+} -+EXPORT_SYMBOL(otg_statemachine); ---- /dev/null -+++ b/drivers/usb/otg/otg_fsm.h -@@ -0,0 +1,170 @@ -+/* Copyright (C) 2006-2007 Freescale Semiconductor, Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#ifndef OTG_FSM_H -+#define OTG_FSM_H -+ -+#if 0 -+#define DEBUG 1 -+#define VERBOSE 1 -+#endif -+ -+#ifdef DEBUG -+#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt , \ -+ __FUNCTION__, ## args) -+#else -+#define DBG(fmt, args...) do {} while (0) -+#endif -+ -+#ifdef VERBOSE -+#define VDBG DBG -+#else -+#define VDBG(stuff...) do {} while (0) -+#endif -+ -+#ifdef VERBOSE -+#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__) -+#else -+#define MPC_LOC do {} while (0) -+#endif -+ -+#define PROTO_UNDEF 0 -+#define PROTO_HOST 1 -+#define PROTO_GADGET 2 -+ -+ -+ -+ -+ -+/* OTG state machine according to the OTG spec */ -+struct otg_fsm { -+ /* Input */ -+ int a_bus_resume; -+ int a_bus_suspend; -+ int a_conn; -+ int a_sess_vld; -+ int a_srp_det; -+ int a_vbus_vld; -+ int b_bus_resume; -+ int b_bus_suspend; -+ int b_conn; -+ int b_se0_srp; -+ int b_sess_end; -+ int b_sess_vld; -+ int id; -+ -+ /* Internal variables */ -+ int a_set_b_hnp_en; -+ int b_srp_done; -+ int b_hnp_enable; -+ -+ /* Timeout indicator for timers */ -+ int a_wait_vrise_tmout; -+ int a_wait_bcon_tmout; -+ int a_aidl_bdis_tmout; -+ int b_ase0_brst_tmout; -+ -+ /* Informative variables */ -+ int a_bus_drop; -+ int a_bus_req; -+ int a_clr_err; -+ int a_suspend_req; -+ int b_bus_req; -+ -+ /* Output */ -+ int drv_vbus; -+ int loc_conn; -+ int loc_sof; -+ -+ struct otg_fsm_ops *ops; -+ struct otg_transceiver *transceiver; -+ -+ void *a_wait_vrise_tmr; -+ void *a_wait_bcon_tmr; -+ void *a_aidl_bdis_tmr; -+ void *b_ase0_brst_tmr; -+ void *b_se0_srp_tmr; -+ void *b_srp_fail_tmr; -+ void *a_wait_enum_tmr; -+ -+ /* Current usb protocol used: 0:undefine; 1:host; 2:client */ -+ int protocol; -+ spinlock_t lock; /* fsm lock */ -+}; -+ -+struct otg_fsm_ops { -+ void (*chrg_vbus)(int on); -+ void (*drv_vbus)(int on); -+ void (*loc_conn)(int on); -+ void (*loc_sof)(int on); -+ void (*start_pulse)(void); -+ void (*add_timer)(void *timer); -+ void (*del_timer)(void *timer); -+ int (*start_host)(struct otg_fsm *fsm, int on); -+ int (*start_gadget)(struct otg_fsm *fsm, int on); -+}; -+ -+ -+static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on) -+{ -+ fsm->ops->chrg_vbus(on); -+} -+ -+static inline void otg_drv_vbus(struct otg_fsm *fsm, int on) -+{ -+ if (fsm->drv_vbus != on) { -+ fsm->drv_vbus = on; -+ fsm->ops->drv_vbus(on); -+ } -+} -+ -+static inline void otg_loc_conn(struct otg_fsm *fsm, int on) -+{ -+ if (fsm->loc_conn != on) { -+ fsm->loc_conn = on; -+ fsm->ops->loc_conn(on); -+ } -+} -+ -+static inline void otg_loc_sof(struct otg_fsm *fsm, int on) -+{ -+ if (fsm->loc_sof != on) { -+ fsm->loc_sof = on; -+ fsm->ops->loc_sof(on); -+ } -+} -+ -+static inline void otg_start_pulse(struct otg_fsm *fsm) -+{ -+ fsm->ops->start_pulse(); -+} -+ -+static inline void otg_add_timer(struct otg_fsm *fsm, void *timer) -+{ -+ fsm->ops->add_timer(timer); -+} -+ -+static inline void otg_del_timer(struct otg_fsm *fsm, void *timer) -+{ -+ fsm->ops->del_timer(timer); -+} -+ -+extern int otg_statemachine(struct otg_fsm *fsm); -+ -+extern const char *state_string(enum usb_otg_state state); -+ -+#endif ---- a/drivers/video/cfbimgblt.c -+++ b/drivers/video/cfbimgblt.c -@@ -44,12 +44,12 @@ - #endif - - static const u32 cfb_tab8[] = { --#if defined(__BIG_ENDIAN) -+#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE) - 0x00000000,0x000000ff,0x0000ff00,0x0000ffff, - 0x00ff0000,0x00ff00ff,0x00ffff00,0x00ffffff, - 0xff000000,0xff0000ff,0xff00ff00,0xff00ffff, - 0xffff0000,0xffff00ff,0xffffff00,0xffffffff --#elif defined(__LITTLE_ENDIAN) -+#elif defined(__LITTLE_ENDIAN) || defined(CONFIG_COLDFIRE) - 0x00000000,0xff000000,0x00ff0000,0xffff0000, - 0x0000ff00,0xff00ff00,0x00ffff00,0xffffff00, - 0x000000ff,0xff0000ff,0x00ff00ff,0xffff00ff, -@@ -60,9 +60,9 @@ static const u32 cfb_tab8[] = { - }; - - static const u32 cfb_tab16[] = { --#if defined(__BIG_ENDIAN) -+#if defined(__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE) - 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff --#elif defined(__LITTLE_ENDIAN) -+#elif defined(__LITTLE_ENDIAN) || defined(CONFIG_COLDFIRE) - 0x00000000, 0xffff0000, 0x0000ffff, 0xffffffff - #else - #error FIXME: No endianness?? ---- a/drivers/video/console/bitblit.c -+++ b/drivers/video/console/bitblit.c -@@ -78,7 +78,11 @@ static inline void bit_putcs_aligned(str - u32 d_pitch, u32 s_pitch, u32 cellsize, - struct fb_image *image, u8 *buf, u8 *dst) - { -+#ifndef CONFIG_COLDFIRE - u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; -+#else -+ u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; -+#endif - u32 idx = vc->vc_font.width >> 3; - u8 *src; - -@@ -111,7 +115,11 @@ static inline void bit_putcs_unaligned(s - struct fb_image *image, u8 *buf, - u8 *dst) - { -+#ifndef CONFIG_COLDFIRE - u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; -+#else -+ u32 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; -+#endif - u32 shift_low = 0, mod = vc->vc_font.width % 8; - u32 shift_high = 8; - u32 idx = vc->vc_font.width >> 3; -@@ -238,7 +246,11 @@ static void bit_cursor(struct vc_data *v - { - struct fb_cursor cursor; - struct fbcon_ops *ops = info->fbcon_par; -+#ifndef CONFIG_COLDFIRE - unsigned short charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; -+#else -+ unsigned long charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; -+#endif - int w = (vc->vc_font.width + 7) >> 3, c; - int y = real_y(ops->p, vc->vc_y); - int attribute, use_sw = (vc->vc_cursor_type & 0x10); ---- a/drivers/video/console/fbcon.c -+++ b/drivers/video/console/fbcon.c -@@ -2679,8 +2679,11 @@ static int fbcon_set_palette(struct vc_d - { - struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; - int i, j, k, depth; -- u8 val; -- -+#ifndef CONFIG_COLDFIRE -+ u8 val; -+#else -+ u32 val; -+#endif - if (fbcon_is_inactive(vc, info)) - return -EINVAL; - ---- a/drivers/video/Kconfig -+++ b/drivers/video/Kconfig -@@ -201,6 +201,16 @@ config FB_TILEBLITTING - comment "Frame buffer hardware drivers" - depends on FB - -+config FB_SMI -+ tristate "SiliconMotion Lynx support" -+ depends on FB && PCI -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ ---help--- -+ This enables support for the Silicon Motion Lynx family of graphic -+ chips. It has been tested on ColdFire. -+ - config FB_CIRRUS - tristate "Cirrus Logic support" - depends on FB && (ZORRO || PCI) ---- a/drivers/video/Makefile -+++ b/drivers/video/Makefile -@@ -28,6 +28,7 @@ obj-$(CONFIG_FB_DDC) += fb_ddc - obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o - - # Hardware specific drivers go first -+obj-$(CONFIG_FB_SMI) += smifb.o - obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o - obj-$(CONFIG_FB_ARC) += arcfb.o - obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o ---- /dev/null -+++ b/drivers/video/smifb.c -@@ -0,0 +1,949 @@ -+/*************************************************************************** -+ smifb.c - Silicon Motion, Inc. LynxEM+ frame buffer device -+ ------------------- -+ begin : Thu Aug 9 2001 -+ copyright : (C) 2001 by Szu-Tao Huang -+ email : johuang@siliconmotion.com -+ ***************************************************************************/ -+ -+/*************************************************************************** -+ * * -+ * This program is free software; you can redistribute it and/or modify * -+ * it under the terms of the GNU General Public License as published by * -+ * the Free Software Foundation; either version 2 of the License, or * -+ * (at your option) any later version. * -+ * * -+ ***************************************************************************/ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/errno.h> -+#include <linux/string.h> -+#include <linux/mm.h> -+#include <linux/tty.h> -+#include <linux/slab.h> -+#include <linux/delay.h> -+#include <linux/fb.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+ -+#include <asm/io.h> -+#include <asm/irq.h> -+#include <asm/pgtable.h> -+#include <asm/system.h> -+#include <asm/uaccess.h> -+ -+#include "console/fbcon.h" -+ -+/* -+#include <video/fbcon.h> -+#include <video/fbcon-cfb8.h> -+#include <video/fbcon-cfb16.h> -+#include <video/fbcon-cfb24.h> -+*/ -+ -+#include <linux/fb.h> -+ -+static char *SMIRegs; // point to virtual Memory Map IO starting address -+static char *SMILFB; // point to virtual video memory starting address -+static struct par_info hw; // used to record hardware information -+ -+#include "smifb.h" -+ -+struct ModeInit VGAMode[numVGAModes] = -+{ -+ { -+ /* mode#0: 640 x 480 8Bpp 60Hz */ -+ 640, 480, 8, 60, -+ /* Init_MISC */ -+ 0xE3, -+ { /* Init_SR0_SR4 */ -+ 0x03, 0x01, 0x0F, 0x00, 0x0E, -+ }, -+ { /* Init_SR10_SR24 */ -+ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, -+ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xC4, 0x30, 0x02, 0x01, 0x01, -+ }, -+ { /* Init_SR30_SR75 */ -+ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, -+ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, -+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, -+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, -+ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, -+ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, -+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, -+ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, -+ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, -+ }, -+ { /* Init_SR80_SR93 */ -+ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, -+ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, -+ 0x00, 0x00, 0x00, 0x00, -+ }, -+ { /* Init_SRA0_SRAF */ -+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, -+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, -+ }, -+ { /* Init_GR00_GR08 */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, -+ 0xFF, -+ }, -+ { /* Init_AR00_AR14 */ -+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, -+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, -+ 0x41, 0x00, 0x0F, 0x00, 0x00, -+ }, -+ { /* Init_CR00_CR18 */ -+ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, -+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, -+ 0xFF, -+ }, -+ { /* Init_CR30_CR4D */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, -+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, -+ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, -+ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, -+ }, -+ { /* Init_CR90_CRA7 */ -+ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, -+ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, -+ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, -+ }, -+ }, -+ { -+ /* mode#1: 640 x 480 16Bpp 60Hz */ -+ 640, 480, 16, 60, -+ /* Init_MISC */ -+ 0xE3, -+ { /* Init_SR0_SR4 */ -+ 0x03, 0x01, 0x0F, 0x00, 0x0E, -+ }, -+ { /* Init_SR10_SR24 */ -+ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, -+ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xC4, 0x30, 0x02, 0x01, 0x01, -+ }, -+ { /* Init_SR30_SR75 */ -+ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, -+ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, -+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, -+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, -+ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, -+ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, -+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, -+ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, -+ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, -+ }, -+ { /* Init_SR80_SR93 */ -+ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, -+ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, -+ 0x00, 0x00, 0x00, 0x00, -+ }, -+ { /* Init_SRA0_SRAF */ -+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, -+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, -+ }, -+ { /* Init_GR00_GR08 */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, -+ 0xFF, -+ }, -+ { /* Init_AR00_AR14 */ -+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, -+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, -+ 0x41, 0x00, 0x0F, 0x00, 0x00, -+ }, -+ { /* Init_CR00_CR18 */ -+ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, -+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, -+ 0xFF, -+ }, -+ { /* Init_CR30_CR4D */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, -+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, -+ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, -+ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, -+ }, -+ { /* Init_CR90_CRA7 */ -+ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, -+ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, -+ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, -+ }, -+ }, -+ { -+ /* mode#2: 640 x 480 24Bpp 60Hz */ -+ 640, 480, 24, 60, -+ /* Init_MISC */ -+ 0xE3, -+ { /* Init_SR0_SR4 */ -+ 0x03, 0x01, 0x0F, 0x00, 0x0E, -+ }, -+ { /* Init_SR10_SR24 */ -+ 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, -+ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xC4, 0x30, 0x02, 0x01, 0x01, -+ }, -+ { /* Init_SR30_SR75 */ -+ 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, -+ 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, -+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, -+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, -+ 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, -+ 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, -+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, -+ 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, -+ 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, -+ }, -+ { /* Init_SR80_SR93 */ -+ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, -+ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, -+ 0x00, 0x00, 0x00, 0x00, -+ }, -+ { /* Init_SRA0_SRAF */ -+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, -+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, -+ }, -+ { /* Init_GR00_GR08 */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, -+ 0xFF, -+ }, -+ { /* Init_AR00_AR14 */ -+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, -+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, -+ 0x41, 0x00, 0x0F, 0x00, 0x00, -+ }, -+ { /* Init_CR00_CR18 */ -+ 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, -+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, -+ 0xFF, -+ }, -+ { /* Init_CR30_CR4D */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, -+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, -+ 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, -+ 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, -+ }, -+ { /* Init_CR90_CRA7 */ -+ 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, -+ 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, -+ 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, -+ }, -+ }, -+ {/* mode#3: 800 x 600 8Bpp 60Hz */ -+ 800,600,8,60, -+ 0x2B, /* Init_MISC */ -+ { /* Init_SR0_SR4 */ -+ 0x03, 0x01, 0x0F, 0x03, 0x0E, -+ }, -+ { /* Init_SR10_SR24 */ -+ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, -+ 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xC4, 0x30, 0x02, 0x01, 0x01, -+ }, -+ { /* Init_SR30_SR75 */ -+ 0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, -+ 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, -+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, -+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, -+ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, -+ 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, -+ 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, -+ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, -+ 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, -+ }, -+ { /* Init_SR80_SR93 */ -+ 0xFF, 0x87, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, -+ 0x90, 0x01, 0x2C, 0x01, 0xFF, 0x00, 0x24, 0x24, -+ 0x00, 0x00, 0x00, 0x00, -+ }, -+ { /* Init_SRA0_SRAF */ -+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, -+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, -+ }, -+ { /* Init_GR00_GR08 */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, -+ 0xFF, -+ }, -+ { /* Init_AR00_AR14 */ -+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, -+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, -+ 0x41, 0x00, 0x0F, 0x00, 0x00, -+ }, -+ { /* Init_CR00_CR18 */ -+ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, -+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, -+ 0xFF, -+ }, -+ { /* Init_CR30_CR4D */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, -+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, -+ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, -+ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, -+ }, -+ { /* Init_CR90_CRA7 */ -+ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, -+ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, -+ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, -+ }, -+ }, -+ {/* mode#4: 800 x 600 16Bpp 60Hz */ -+ 800, 600, 16, 60, -+ /* Init_MISC */ -+ 0x2B, -+ { /* Init_SR0_SR4 */ -+ 0x03, 0x01, 0x0F, 0x03, 0x0E, -+ }, -+ { /* Init_SR10_SR24 */ -+ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, -+ 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xC4, 0x30, 0x02, 0x01, 0x01, -+ }, -+ { /* Init_SR30_SR75 */ -+ 0x24, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, -+ 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, -+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, -+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, -+ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, -+ 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, -+ 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, -+ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, -+ 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, -+ }, -+ { /* Init_SR80_SR93 */ -+ 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, -+ 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24, -+ 0x00, 0x00, 0x00, 0x00, -+ }, -+ { /* Init_SRA0_SRAF */ -+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, -+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, -+ }, -+ { /* Init_GR00_GR08 */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, -+ 0xFF, -+ }, -+ { /* Init_AR00_AR14 */ -+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, -+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, -+ 0x41, 0x00, 0x0F, 0x00, 0x00, -+ }, -+ { /* Init_CR00_CR18 */ -+ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, -+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, -+ 0xFF, -+ }, -+ { /* Init_CR30_CR4D */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, -+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, -+ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, -+ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, -+ }, -+ { /* Init_CR90_CRA7 */ -+ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, -+ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, -+ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, -+ }, -+ }, -+ {/* mode#5: 800 x 600 24Bpp 60Hz */ -+ 800,600,24,60, -+ 0x2B, -+ { /* Init_SR0_SR4 */ -+ 0x03, 0x01, 0x0F, 0x03, 0x0E, -+ }, -+ { /* Init_SR10_SR24 */ -+ 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, -+ 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0xC4, 0x30, 0x02, 0x01, 0x01, -+ }, -+ { /* Init_SR30_SR75 */ -+ 0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36, -+ 0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF, -+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, -+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36, -+ 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, -+ 0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36, -+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, -+ 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, -+ 0x02, 0x45, 0x30, 0x30, 0x40, 0x20, -+ }, -+ { /* Init_SR80_SR93 */ -+ 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36, -+ 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36, -+ 0x00, 0x00, 0x00, 0x00, -+ }, -+ { /* Init_SRA0_SRAF */ -+ 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, -+ 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, -+ }, -+ { /* Init_GR00_GR08 */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, -+ 0xFF, -+ }, -+ { /* Init_AR00_AR14 */ -+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, -+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, -+ 0x41, 0x00, 0x0F, 0x00, 0x00, -+ }, -+ { /* Init_CR00_CR18 */ -+ 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, -+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -+ 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, -+ 0xFF, -+ }, -+ { /* Init_CR30_CR4D */ -+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, -+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, -+ 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, -+ 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, -+ }, -+ { /* Init_CR90_CRA7 */ -+ 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, -+ 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, -+ 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, -+ }, -+ }, -+}; -+ -+static void smi_set_timing(struct smifb_info *sfb,struct par_info *hw) -+{ -+ int i=0,j=0; -+ u32 m_nScreenStride; -+ -+ -+ for (j=0;j < numVGAModes;j++) { -+ if (VGAMode[j].mmSizeX == hw->width && -+ VGAMode[j].mmSizeY == hw->height && -+ VGAMode[j].bpp == sfb->fb.var.bits_per_pixel && -+ VGAMode[j].hz == hw->hz) -+ { -+ -+ smi_mmiowb(0x0,0x3c6); -+ -+ smi_seqw(0,0x1); -+ -+ smi_mmiowb(VGAMode[j].Init_MISC,0x3c2); -+ -+ for (i=0;i<SIZE_SR00_SR04;i++) // init SEQ register SR00 - SR04 -+ { -+ smi_seqw(i,VGAMode[j].Init_SR00_SR04[i]); -+ } -+ -+ for (i=0;i<SIZE_SR10_SR24;i++) // init SEQ register SR10 - SR24 -+ { -+ smi_seqw(i+0x10,VGAMode[j].Init_SR10_SR24[i]); -+ } -+ -+ for (i=0;i<SIZE_SR30_SR75;i++) // init SEQ register SR30 - SR75 -+ { -+ if (((i+0x30) != 0x62) && ((i+0x30) != 0x6a) && ((i+0x30) != 0x6b)) -+ smi_seqw(i+0x30,VGAMode[j].Init_SR30_SR75[i]); -+ } -+ for (i=0;i<SIZE_SR80_SR93;i++) // init SEQ register SR80 - SR93 -+ { -+ smi_seqw(i+0x80,VGAMode[j].Init_SR80_SR93[i]); -+ } -+ for (i=0;i<SIZE_SRA0_SRAF;i++) // init SEQ register SRA0 - SRAF -+ { -+ smi_seqw(i+0xa0,VGAMode[j].Init_SRA0_SRAF[i]); -+ } -+ -+ for (i=0;i<SIZE_GR00_GR08;i++) // init Graphic register GR00 - GR08 -+ { -+ smi_grphw(i,VGAMode[j].Init_GR00_GR08[i]); -+ } -+ -+ for (i=0;i<SIZE_AR00_AR14;i++) // init Attribute register AR00 - AR14 -+ { -+ -+ smi_attrw(i,VGAMode[j].Init_AR00_AR14[i]); -+ } -+ -+ for (i=0;i<SIZE_CR00_CR18;i++) // init CRTC register CR00 - CR18 -+ { -+ smi_crtcw(i,VGAMode[j].Init_CR00_CR18[i]); -+ } -+ -+ for (i=0;i<SIZE_CR30_CR4D;i++) // init CRTC register CR30 - CR4D -+ { -+ smi_crtcw(i+0x30,VGAMode[j].Init_CR30_CR4D[i]); -+ } -+ -+ for (i=0;i<SIZE_CR90_CRA7;i++) // init CRTC register CR90 - CRA7 -+ { -+ smi_crtcw(i+0x90,VGAMode[j].Init_CR90_CRA7[i]); -+ } -+ } -+ } -+ smi_mmiowb(0x67,0x3c2); -+ // set VPR registers -+ writel(0x0,hw->m_pVPR+0x0C); -+ writel(0x0,hw->m_pVPR+0x40); -+ // set data width -+ m_nScreenStride = (hw->width * sfb->fb.var.bits_per_pixel) / 64; -+ switch (sfb->fb.var.bits_per_pixel) -+ { -+ case 8: -+ writel(0x0,hw->m_pVPR+0x0); -+ break; -+ case 16: -+ writel(0x00020000,hw->m_pVPR+0x0); -+ break; -+ case 24: -+ writel(0x00040000,hw->m_pVPR+0x0); -+ break; -+ } -+ writel((u32)(((m_nScreenStride + 2) << 16) | m_nScreenStride),hw->m_pVPR+0x10); -+} -+ -+/* -+ * Set the color palette -+ */ -+static int -+smifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, -+ u_int trans, struct fb_info *info) -+{ -+ -+ struct smifb_info *sfb = (struct smifbinfo *)info; -+ u32 *pal; -+ -+ switch (sfb->fb.fix.visual) { -+ case FB_VISUAL_TRUECOLOR: /* RGB 5:6:5 True Colour */ -+ pal = sfb->fb.pseudo_palette; // System has 16 default color -+ if (regno >= 16) -+ return 1; -+ -+ pal[regno] = (red & 0xf800) | -+ ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11); -+ break; -+ } -+ -+ return 0; -+} -+ -+/* -+ * smifb_decode_var(): -+ * Get the video params out of 'var'. If a value doesn't fit, round it up, -+ * if it's too big, return -EINVAL. -+ * -+ * Suggestion: Round up in the following order: bits_per_pixel, xres, -+ * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, -+ * bitfields, horizontal timing, vertical timing. -+ */ -+static int smifb_decode_var(struct fb_var_screeninfo *var, struct smifb_info *sfb, struct par_info *hw) -+{ -+ hw->width = var->xres; -+ hw->height = var->yres; -+ hw->hz = 60; -+ -+ return 0; -+} -+ -+static int smifb_set_par (struct fb_info *info) -+{ -+ struct smifb_info *sfb = (struct smifb_info *)info; -+ int err, chgvar = 0; -+ struct fb_var_screeninfo *var = &info->var; -+ struct fb_cmap *cmap; -+ -+ -+ /* -+ * Decode var contents into a par structure, adjusting any -+ * out of range values. -+ */ -+ err = smifb_decode_var(var, sfb, &hw); -+ if (err) { -+ return err; -+ } -+ -+ if (hw.width != var->xres) -+ chgvar = 1; -+ if (hw.height != var->yres) -+ chgvar = 1; -+ -+ var->activate &= ~FB_ACTIVATE_ALL; -+ -+ smi_set_timing(sfb, &hw); -+ -+ sfb->palette_size = var->bits_per_pixel == 8 ? 256 : 16; -+ cmap = fb_default_cmap(sfb->palette_size); -+ fb_set_cmap(cmap, &sfb->fb); -+ -+ return 0; -+} -+ -+static int smifb_check_var (struct fb_var_screeninfo *var, struct fb_info *info) -+{ -+ var->bits_per_pixel += 7; -+ var->bits_per_pixel &= ~7; -+ -+ var->xres_virtual = -+ var->xres_virtual < var->xres ? var->xres : var->xres_virtual; -+ var->yres_virtual = -+ var->yres_virtual < var->yres ? var->yres : var->yres_virtual; -+ -+ switch (var->bits_per_pixel) { -+ case 8: -+ case 16: /* RGB 565 */ -+ case 24: -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ switch (var->bits_per_pixel) { -+ case 16: -+ var->red.offset = 11; -+ var->red.length = 5; -+ var->green.offset = 5; -+ var->green.length = 6; -+ var->blue.offset = 0; -+ var->blue.length = 5; -+ -+ info->fix.visual = FB_VISUAL_TRUECOLOR; -+ info->fix.line_length= var->xres * 2; -+ -+ break; -+ default: -+ return -EINVAL; /* We don't support anything other than 16bpp for now. --NL */ -+ break; -+ } -+ return 0; -+ -+// smifb_set_color_bitfields(var); -+ -+ return 0; -+} -+ -+/* -+ * Formal definition of the VESA spec: -+ * On -+ * This refers to the state of the display when it is in full operation -+ * Stand-By -+ * This defines an optional operating state of minimal power reduction with -+ * the shortest recovery time -+ * Suspend -+ * This refers to a level of power management in which substantial power -+ * reduction is achieved by the display. The display can have a longer -+ * recovery time from this state than from the Stand-by state -+ * Off -+ * This indicates that the display is consuming the lowest level of power -+ * and is non-operational. Recovery from this state may optionally require -+ * the user to manually power on the monitor -+ * -+ * Now, the fbdev driver adds an additional state, (blank), where they -+ * turn off the video (maybe by colormap tricks), but don't mess with the -+ * video itself: think of it semantically between on and Stand-By. -+ * -+ * So here's what we should do in our fbdev blank routine: -+ * -+ * VESA_NO_BLANKING (mode 0) Video on, front/back light on -+ * VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off -+ * VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off -+ * VESA_POWERDOWN (mode 3) Video off, front/back light off -+ * -+ * This will match the matrox implementation. -+ */ -+/* -+ * smifb_blank(): -+ * Blank the display by setting all palette values to zero. Note, the -+ * 12 and 16 bpp modes don't really use the palette, so this will not -+ * blank the display in all modes. -+ */ -+static int smifb_blank(int blank, struct fb_info *info) -+{ -+// struct smifb_info *sfb = (struct smifb_info *)info; -+#if 0 -+ switch (blank) { -+ case VESA_POWERDOWN: -+ case VESA_VSYNC_SUSPEND: -+ case VESA_HSYNC_SUSPEND: -+ case VESA_NO_BLANKING: -+ } -+#endif -+ return 1; -+} -+ -+static struct fb_ops smifb_ops = { -+ .owner = THIS_MODULE, -+ .fb_check_var = smifb_check_var, -+ .fb_set_par = smifb_set_par, -+ .fb_setcolreg = smifb_setcolreg, -+ .fb_blank = smifb_blank, -+ -+ /* Accelerated functions, using softversions, per se */ -+ .fb_fillrect = cfb_fillrect, -+ .fb_copyarea = cfb_copyarea, -+ .fb_imageblit = cfb_imageblit, -+ .fb_cursor = soft_cursor, -+}; -+ -+/* -+ * Alloc struct smifb_info and assign the default value -+ */ -+static struct smifb_info * __devinit -+smi_alloc_fb_info(struct pci_dev *dev, char *name) -+{ -+ struct smifb_info *sfb; -+ -+ sfb = kmalloc(sizeof(struct smifb_info) + sizeof(u32) * 16, GFP_KERNEL); -+ -+ if (!sfb) -+ return NULL; -+ -+ memset(sfb, 0, sizeof(struct smifb_info)); -+ -+ sfb->currcon = -1; -+ sfb->dev = dev; -+ -+ strcpy(sfb->fb.fix.id, name); -+ -+ sfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; -+ sfb->fb.fix.type_aux = 0; -+ sfb->fb.fix.xpanstep = 0; -+ sfb->fb.fix.ypanstep = 0; -+ sfb->fb.fix.ywrapstep = 0; -+ sfb->fb.fix.accel = FB_ACCEL_NONE; -+ -+ sfb->fb.var.nonstd = 0; -+ sfb->fb.var.activate = FB_ACTIVATE_NOW; -+ sfb->fb.var.height = -1; -+ sfb->fb.var.width = -1; -+ sfb->fb.var.accel_flags = 0; -+ sfb->fb.var.vmode = FB_VMODE_NONINTERLACED; -+ -+ sfb->fb.fbops = &smifb_ops; -+ sfb->fb.flags = FBINFO_FLAG_DEFAULT; -+ sfb->fb.node = -1; -+ sfb->fb.pseudo_palette = (void *)(&sfb->palette_size + 1); -+ -+ return sfb; -+} -+ -+/* -+ * Unmap in the memory mapped IO registers -+ * -+ */ -+ -+static void __devinit -+smi_unmap_mmio(struct smifb_info *sfb) -+{ -+ if (sfb && SMILFB) -+ { -+ iounmap(SMILFB); -+ SMIRegs = NULL; -+ } -+} -+ -+/* -+ * Map in the screen memory -+ * -+ */ -+static int __devinit -+smi_map_smem(struct smifb_info *sfb, struct pci_dev *dev, u_long smem_len) -+{ -+ -+ sfb->fb.fix.smem_start = pci_resource_start(dev, 0); -+ sfb->fb.fix.smem_len = smem_len; -+ printk("%s:smem %x,len %x\n",sfb->fb.fix.smem_start,sfb->fb.fix.smem_len); -+ sfb->fb.screen_base = SMILFB; -+ -+ if (!sfb->fb.screen_base) -+ { -+ printk("%s: unable to map screen memory\n",sfb->fb.fix.id); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+ -+/* -+ * Unmap in the screen memory -+ * -+ */ -+static void __devinit -+smi_unmap_smem(struct smifb_info *sfb) -+{ -+ if (sfb && sfb->fb.screen_base) -+ { -+ iounmap(sfb->fb.screen_base); -+ sfb->fb.screen_base = NULL; -+ } -+} -+ -+/* -+ * We need to wake up the LynxEM+, and make sure its in linear memory mode. -+ */ -+static inline void __devinit -+smi_init_hw(void) -+{ -+ /* The delays prevent the ColdFire PCI host from locking up. :/ --NL */ -+ udelay(1000); -+ outb(0x18, 0x3c4); -+ udelay(1000); -+ outb(0x11, 0x3c5); -+ udelay(1000); -+ printk("%s: 0x3c4 =%x 0x3c5 %x\n",__FUNCTION__,inw(0x3c4),inw(0x3c5)); -+} -+ -+static void __devinit -+smi_free_fb_info(struct smifb_info *sfb) -+{ -+ if (sfb) { -+ fb_alloc_cmap(&sfb->fb.cmap, 0, 0); -+ kfree(sfb); -+ } -+} -+ -+ -+u16 SMI_ChipIDs[numChipIDs] = {0x710, 0x712, 0x720}; -+ -+int __init smifb_init(struct pci_dev *pdev, const struct pci_device_id *ent) -+{ -+ struct smifb_info *sfb; -+ u_long smem_size; -+ char name[16]; -+ int err; -+ char *m_pLAW; -+ ulong m_pLAWPhysical; -+ -+ printk("%s start\n",__FUNCTION__); -+ sprintf(name, "smifb"); -+ -+ hw.chipID = pdev->device; -+ -+ err = -ENOMEM; -+ sfb = smi_alloc_fb_info(pdev, name); -+ if (!sfb) { -+ goto failed; -+ } -+ -+ smi_init_hw(); -+ -+ // Map address and memory detection -+ m_pLAWPhysical = pci_resource_start(pdev,0); -+ printk("%s:m_pLAWPhysical %x,hw.chipID %x\n",__FUNCTION__,m_pLAWPhysical,hw.chipID); -+ switch (hw.chipID) { -+ case 0x710: -+ case 0x712: -+ sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x00700000; -+ sfb->fb.fix.mmio_len = 0x00100000; -+ -+ hw.m_pLFB = SMILFB = ioremap(m_pLAWPhysical, 0x00800000); -+ printk("%s:SMILFB%x\n",__FUNCTION__,SMILFB); -+ hw.m_pMMIO = SMIRegs = SMILFB + 0x00700000; -+ hw.m_pDPR = hw.m_pLFB + 0x00408000; -+ hw.m_pVPR = hw.m_pLFB + 0x0040c000; -+ -+ if (!SMIRegs) -+ { -+ printk("%s: unable to map memory mapped IO\n",sfb->fb.fix.id); -+ return -ENOMEM; -+ } -+ -+ smi_seqw(0x62,0x7A); -+ smi_seqw(0x6a,0x0c); -+ smi_seqw(0x6b,0x02); -+ smem_size = 0x00400000; -+ -+ //LynxEM+ memory dection -+ *(u32 *)(SMILFB + 4) = 0xAA551133; -+ if (*(u32 *)(SMILFB + 4) != 0xAA551133) -+ { -+ smem_size = 0x00200000; -+ // Program the MCLK to 130 MHz -+ smi_seqw(0x6a,0x12); -+ smi_seqw(0x6b,0x02); -+ smi_seqw(0x62,0x3e); -+ } -+ break; -+ case 0x720: -+ sfb->fb.fix.mmio_start = m_pLAWPhysical + 0x000c0000; -+ sfb->fb.fix.mmio_len = 0x00040000; -+ -+ m_pLAW = ioremap(m_pLAWPhysical, 0x00a00000); -+ hw.m_pLFB = SMILFB = m_pLAW + 0x00200000; -+ hw.m_pMMIO = SMIRegs = m_pLAW + 0x000c0000; -+ hw.m_pDPR = m_pLAW; -+ hw.m_pVPR = m_pLAW + 0x800; -+ -+ smi_seqw(0x62,0xff); -+ smi_seqw(0x6a,0x0d); -+ smi_seqw(0x6b,0x02); -+ smem_size = 0x00400000; -+ -+ break; -+ } -+ -+ sfb->fb.var.xres = 640; -+ sfb->fb.var.yres = 480; -+ sfb->fb.var.bits_per_pixel = 16; -+ -+ sfb->fb.var.xres_virtual = sfb->fb.var.xres; -+ -+ sfb->fb.var.yres_virtual = sfb->fb.var.yres; -+ -+ sfb->fb.flags = FBINFO_FLAG_DEFAULT; -+ -+ printk("%s:smem_size %x\n",__FUNCTION__,smem_size); -+ err = smi_map_smem(sfb, pdev, smem_size); -+ printk("%s:smi_map_smem error %x\n",__FUNCTION__,err); -+ if (err) { -+ goto failed; -+ } -+ -+ -+ -+ fb_set_var(&sfb->fb, &sfb->fb.var); -+ smifb_check_var(&sfb->fb.var, &sfb->fb); -+ smifb_set_par(sfb); -+ printk("%s:register_framebuffer \n",__FUNCTION__); -+ err = register_framebuffer(&sfb->fb); -+ if (err < 0) { -+ goto failed; -+ } -+ -+ printk("Silicon Motion, Inc. LynxEM+ Init complete.\n"); -+ -+ return 0; -+ -+failed: -+ smi_unmap_smem(sfb); -+ smi_unmap_mmio(sfb); -+ smi_free_fb_info(sfb); -+ printk("Silicon Motion, Inc. LynxEM+ Init FAILED.n"); -+ -+ return err; -+} -+ -+struct pci_device_id smifb_pci_tbl[] = { -+ { 0x126f, 0x710, PCI_ANY_ID, PCI_ANY_ID }, -+ { 0x126f, 0x712, PCI_ANY_ID, PCI_ANY_ID }, -+ { 0x126f, 0x720, PCI_ANY_ID, PCI_ANY_ID }, -+ { 0 } -+}; -+ -+MODULE_DEVICE_TABLE(pci, smifb_pci_tbl); -+ -+struct pci_driver smifb_driver = { -+ .name = "smifb", -+ .id_table = smifb_pci_tbl, -+ .probe = smifb_init, -+}; -+ -+int __init smi_init(void) -+{ -+ /*return pci_module_init(&smifb_driver);*/ -+ return pci_register_driver(&smifb_driver); -+} -+ -+module_init(smi_init); -+MODULE_LICENSE("GPL"); -+ -+ -+ ---- /dev/null -+++ b/drivers/video/smifb.h -@@ -0,0 +1,149 @@ -+/*************************************************************************** -+ smifb.h - SiliconMotion LynxEM+ frame buffer device -+ ------------------- -+ begin : Thu Aug 9 2001 -+ copyright : (C) 2001 by Szu-Tao Huang -+ email : johuang@siliconmotion.com -+ ***************************************************************************/ -+ -+/*************************************************************************** -+ * * -+ * This program is free software; you can redistribute it and/or modify * -+ * it under the terms of the GNU General Public License as published by * -+ * the Free Software Foundation; either version 2 of the License, or * -+ * (at your option) any later version. * -+ * * -+ ***************************************************************************/ -+ -+#define smi_mmiowb(dat,reg) writeb(dat, SMIRegs + reg) -+#define smi_mmioww(dat,reg) writew(dat, SMIRegs + reg) -+#define smi_mmiowl(dat,reg) writel(dat, SMIRegs + reg) -+ -+#define smi_mmiorb(reg) readb(SMIRegs + reg) -+#define smi_mmiorw(reg) readw(SMIRegs + reg) -+#define smi_mmiorl(reg) readl(SMIRegs + reg) -+ -+#define SIZE_SR00_SR04 (0x04 - 0x00 + 1) -+#define SIZE_SR10_SR24 (0x24 - 0x10 + 1) -+#define SIZE_SR30_SR75 (0x75 - 0x30 + 1) -+#define SIZE_SR80_SR93 (0x93 - 0x80 + 1) -+#define SIZE_SRA0_SRAF (0xAF - 0xA0 + 1) -+#define SIZE_GR00_GR08 (0x08 - 0x00 + 1) -+#define SIZE_AR00_AR14 (0x14 - 0x00 + 1) -+#define SIZE_CR00_CR18 (0x18 - 0x00 + 1) -+#define SIZE_CR30_CR4D (0x4D - 0x30 + 1) -+#define SIZE_CR90_CRA7 (0xA7 - 0x90 + 1) -+#define SIZE_VPR (0x6C + 1) -+#define SIZE_DPR (0x44 + 1) -+ -+#define numVGAModes 6 -+#define numChipIDs 3 -+ -+#define NR_PALETTE 256 -+#define NR_RGB 2 -+ -+/* -+ * Minimum X and Y resolutions -+ */ -+#define MIN_XRES 640 -+#define MIN_YRES 480 -+ -+static inline void smi_crtcw(int reg, int val) -+{ -+ smi_mmiowb(reg, 0x3d4); -+ smi_mmiowb(val, 0x3d5); -+} -+ -+static inline unsigned int smi_crtcr(int reg) -+{ -+ smi_mmiowb(reg, 0x3d4); -+ return smi_mmiorb(0x3d5); -+} -+ -+static inline void smi_grphw(int reg, int val) -+{ -+ smi_mmiowb(reg, 0x3ce); -+ smi_mmiowb(val, 0x3cf); -+} -+ -+static inline unsigned int smi_grphr(int reg) -+{ -+ smi_mmiowb(reg, 0x3ce); -+ return smi_mmiorb(0x3cf); -+} -+ -+static inline void smi_attrw(int reg, int val) -+{ -+ smi_mmiorb(0x3da); -+ smi_mmiowb(reg, 0x3c0); -+ smi_mmiorb(0x3c1); -+ smi_mmiowb(val, 0x3c0); -+} -+ -+static inline void smi_seqw(int reg, int val) -+{ -+ smi_mmiowb(reg, 0x3c4); -+ smi_mmiowb(val, 0x3c5); -+} -+ -+static inline unsigned int smi_seqr(int reg) -+{ -+ smi_mmiowb(reg, 0x3c4); -+ return smi_mmiorb(0x3c5); -+} -+/* -+* Private structure -+*/ -+struct smifb_info { -+ /* -+ * The following is a pointer to be passed into the -+ * functions below. The modules outside the main -+ * smifb.c driver have no knowledge as to what -+ * is within this structure. -+ */ -+ struct fb_info fb; -+ struct display_switch *dispsw; -+ struct pci_dev *dev; -+ signed int currcon; -+ -+ struct { -+ u8 red, green, blue; -+ } palette[NR_RGB]; -+ -+ u_int palette_size; -+}; -+ -+struct par_info { -+ /* -+ * Hardware -+ */ -+ u16 chipID; -+ char *m_pLFB; -+ char *m_pMMIO; -+ char *m_pDPR; -+ char *m_pVPR; -+ -+ u_int width; -+ u_int height; -+ u_int hz; -+}; -+ -+// The next structure holds all information relevant for a specific video mode. -+struct ModeInit -+{ -+ int mmSizeX; -+ int mmSizeY; -+ int bpp; -+ int hz; -+ unsigned char Init_MISC; -+ unsigned char Init_SR00_SR04[SIZE_SR00_SR04]; -+ unsigned char Init_SR10_SR24[SIZE_SR10_SR24]; -+ unsigned char Init_SR30_SR75[SIZE_SR30_SR75]; -+ unsigned char Init_SR80_SR93[SIZE_SR80_SR93]; -+ unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF]; -+ unsigned char Init_GR00_GR08[SIZE_GR00_GR08]; -+ unsigned char Init_AR00_AR14[SIZE_AR00_AR14]; -+ unsigned char Init_CR00_CR18[SIZE_CR00_CR18]; -+ unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D]; -+ unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7]; -+}; ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -672,6 +672,15 @@ config TXX9_WDT - - # PARISC Architecture - -+# ColdFire Architecture -+ -+config COLDFIRE_WATCHDOG -+ tristate "ColdFire watchdog support" -+ depends on WATCHDOG -+ help -+ To compile this driver as a module, choose M here: the -+ module will be called softdog. -+ - # POWERPC Architecture - - config MPC5200_WDT ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -86,6 +86,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc - # M32R Architecture - - # M68K Architecture -+obj-$(CONFIG_COLDFIRE_WATCHDOG) += mcf_wdt.o - - # M68KNOMMU Architecture - ---- /dev/null -+++ b/drivers/watchdog/mcf_wdt.c -@@ -0,0 +1,220 @@ -+/* -+ * drivers/watchdog/mcf_wdt.c -+ * -+ * Watchdog driver for ColdFire processors -+ * -+ * Adapted from the IXP4xx watchdog driver. -+ * The original version carries these notices: -+ * -+ * Author: Deepak Saxena <dsaxena@plexity.net> -+ * -+ * Copyright 2004 (c) MontaVista, Software, Inc. -+ * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu> -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <linux/fs.h> -+#include <linux/miscdevice.h> -+#include <linux/watchdog.h> -+#include <linux/init.h> -+#include <linux/bitops.h> -+ -+#include <asm-m68k/uaccess.h> -+#include <asm-m68k/coldfire.h> -+#include <asm-m68k/m5485gpt.h> -+ -+static int nowayout; -+static unsigned int heartbeat = 30; /* (secs) Default is 0.5 minute */ -+static unsigned long wdt_status; -+ -+#define WDT_IN_USE 0 -+#define WDT_OK_TO_CLOSE 1 -+ -+static unsigned long wdt_tick_rate; -+ -+static void -+wdt_enable(void) -+{ -+ MCF_GPT_GMS0 = 0; -+ MCF_GPT_GCIR0 = MCF_GPT_GCIR_PRE(heartbeat*wdt_tick_rate) | -+ MCF_GPT_GCIR_CNT(0xffff); -+ MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS_WDEN | -+ MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS_GPIO; -+} -+ -+static void -+wdt_disable(void) -+{ -+ MCF_GPT_GMS0 = 0; -+} -+ -+static void -+wdt_keepalive(void) -+{ -+ MCF_GPT_GMS0 = MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS0; -+} -+ -+static int -+mcf_wdt_open(struct inode *inode, struct file *file) -+{ -+ if (test_and_set_bit(WDT_IN_USE, &wdt_status)) -+ return -EBUSY; -+ -+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status); -+ -+ wdt_enable(); -+ -+ return nonseekable_open(inode, file); -+} -+ -+static ssize_t -+mcf_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) -+{ -+ if (len) { -+ if (!nowayout) { -+ size_t i; -+ -+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status); -+ -+ for (i = 0; i != len; i++) { -+ char c; -+ -+ if (get_user(c, data + i)) -+ return -EFAULT; -+ if (c == 'V') -+ set_bit(WDT_OK_TO_CLOSE, &wdt_status); -+ } -+ } -+ wdt_keepalive(); -+ } -+ -+ return len; -+} -+ -+ -+static struct watchdog_info ident = { -+ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | -+ WDIOF_KEEPALIVEPING, -+ .identity = "Coldfire Watchdog", -+}; -+ -+static int -+mcf_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ int ret = -ENOIOCTLCMD; -+ int time; -+ -+ switch (cmd) { -+ case WDIOC_GETSUPPORT: -+ ret = copy_to_user((struct watchdog_info *)arg, &ident, -+ sizeof(ident)) ? -EFAULT : 0; -+ break; -+ -+ case WDIOC_GETSTATUS: -+ ret = put_user(0, (int *)arg); -+ break; -+ -+ case WDIOC_GETBOOTSTATUS: -+ ret = put_user(0, (int *)arg); -+ break; -+ -+ case WDIOC_SETTIMEOUT: -+ ret = get_user(time, (int *)arg); -+ if (ret) -+ break; -+ -+ if (time <= 0 || time > 30) { -+ ret = -EINVAL; -+ break; -+ } -+ -+ heartbeat = time; -+ wdt_enable(); -+ /* Fall through */ -+ -+ case WDIOC_GETTIMEOUT: -+ ret = put_user(heartbeat, (int *)arg); -+ break; -+ -+ case WDIOC_KEEPALIVE: -+ wdt_keepalive(); -+ ret = 0; -+ break; -+ } -+ -+ return ret; -+} -+ -+static int -+mcf_wdt_release(struct inode *inode, struct file *file) -+{ -+ if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { -+ wdt_disable(); -+ } else { -+ printk(KERN_CRIT "WATCHDOG: Device closed unexpectdly - " -+ "timer will not stop\n"); -+ } -+ -+ clear_bit(WDT_IN_USE, &wdt_status); -+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status); -+ -+ return 0; -+} -+ -+ -+static struct file_operations mcf_wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .write = mcf_wdt_write, -+ .ioctl = mcf_wdt_ioctl, -+ .open = mcf_wdt_open, -+ .release = mcf_wdt_release, -+}; -+ -+static struct miscdevice mcf_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &mcf_wdt_fops, -+}; -+ -+static int __init mcf_wdt_init(void) -+{ -+ wdt_tick_rate = MCF_BUSCLK/0xffff; -+#ifdef CONFIG_WATCHDOG_NOWAYOUT -+ nowayout = 1; -+#else -+ nowayout = 0; -+#endif -+ printk("ColdFire watchdog driver is loaded.\n"); -+ -+ return misc_register(&mcf_wdt_miscdev); -+} -+ -+static void __exit mcf_wdt_exit(void) -+{ -+ misc_deregister(&mcf_wdt_miscdev); -+} -+ -+module_init(mcf_wdt_init); -+module_exit(mcf_wdt_exit); -+ -+MODULE_AUTHOR("Deepak Saxena"); -+MODULE_DESCRIPTION("ColdFire Watchdog"); -+ -+module_param(heartbeat, int, 0); -+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); -+ -+module_param(nowayout, int, 0); -+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); -+ -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -+ ---- a/fs/namespace.c -+++ b/fs/namespace.c -@@ -1364,7 +1364,11 @@ int copy_mount_options(const void __user - /* copy_from_user cannot cross TASK_SIZE ! */ - size = TASK_SIZE - (unsigned long)data; - if (size > PAGE_SIZE) -+#ifndef CONFIG_COLDFIRE - size = PAGE_SIZE; -+#else -+ size = PAGE_SIZE - ((unsigned long)data & ~PAGE_MASK); -+#endif - - i = size - exact_copy_from_user((void *)page, data, size); - if (!i) { ---- /dev/null -+++ b/include/asm-m68k/5445x_pci.h -@@ -0,0 +1,94 @@ -+/* -+ * asm-m68k/pci.h - m68k specific PCI declarations. -+ * -+ * Coldfire Implementation Copyright (c) 2007 Freescale Semiconductor, Inc. -+ * Kurt Mahan <kmahan@freescale.com> -+ */ -+#ifndef _ASM_M68K_5445X_PCI_H -+#define _ASM_M68K_5445x_PCI_H -+ -+#ifndef CONFIG_PCI -+/* -+ * The PCI address space does equal the physical memory -+ * address space. The networking and block device layers use -+ * this boolean for bounce buffer decisions. -+ */ -+#define PCI_DMA_BUS_IS_PHYS (1) -+#else -+#include <asm-generic/pci-dma-compat.h> -+ -+/* -+ * The PCI address space does equal the physical memory -+ * address space. The networking and block device layers use -+ * this boolean for bounce buffer decisions. -+ */ -+#define PCI_DMA_BUS_IS_PHYS (1) -+ -+#define PCIBIOS_MIN_IO 0x00004000 -+#define PCIBIOS_MIN_MEM 0x02000000 -+ -+#define pcibios_assign_all_busses() 0 -+#define pcibios_scan_all_fns(a, b) 0 -+ -+static inline void -+pcibios_set_master(struct pci_dev *dev) -+{ -+ /* no special bus mastering setup handling */ -+} -+ -+static inline void -+pcibios_penalize_isa_irq(int irq, int active) -+{ -+ /* no dynamic PCI IRQ allocation */ -+} -+ -+#if 0 -+static inline void -+pcibios_add_platform_entries(struct pci_dev *dev) -+{ -+ /* no special handling */ -+} -+#endif -+ -+static inline void -+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, -+ struct resource *res) -+{ -+#ifdef CONFIG_M54455 -+ if ((res->start == 0xa0000000) || (res->start == 0xa8000000)) { -+ /* HACK! FIX! kludge to fix bridge mapping */ -+ region->start = res->start & 0x0fffffff; -+ region->end = res->end & 0x0fffffff; -+ } else { -+ region->start = res->start; -+ region->end = res->end; -+ } -+#else -+ region->start = res->start; -+ region->end = res->end; -+#endif -+} -+ -+static inline void -+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, -+ struct pci_bus_region *region) -+{ -+ res->start = region->start; -+ res->end = region->end; -+} -+ -+static inline struct resource * -+pcibios_select_root(struct pci_dev *pdev, struct resource *res) -+{ -+ struct resource *root = NULL; -+ -+ if (res->flags & IORESOURCE_IO) -+ root = &ioport_resource; -+ if (res->flags & IORESOURCE_MEM) -+ root = &iomem_resource; -+ -+ return root; -+} -+ -+#endif /* CONFIG_PCI */ -+#endif /* _ASM_M68K_5445X_PCI_H */ ---- /dev/null -+++ b/include/asm-m68k/548x_pci.h -@@ -0,0 +1,99 @@ -+#ifndef _ASM_M68K_548X_PCI_H -+#define _ASM_M68K_548X_PCI_H -+ -+/* -+ * asm-m68k/pci_m68k.h - m68k specific PCI declarations. -+ * -+ * Written by Wout Klaren. -+ */ -+#include <linux/mm.h> -+#include <asm/scatterlist.h> -+ -+#include <asm-generic/pci.h> -+ -+struct pci_ops; -+ -+/* -+ * Structure with hardware dependent information and functions of the -+ * PCI bus. -+ */ -+ -+struct pci_bus_info -+{ -+ /* -+ * Resources of the PCI bus. -+ */ -+ -+ struct resource mem_space; -+ struct resource io_space; -+ -+ /* -+ * System dependent functions. -+ */ -+ -+ struct pci_ops *m68k_pci_ops; -+ -+ void (*fixup)(int pci_modify); -+ void (*conf_device)(struct pci_dev *dev); -+}; -+ -+#define pcibios_assign_all_busses() 0 -+#define pcibios_scan_all_fns(a, b) 0 -+ -+static inline void pcibios_set_master(struct pci_dev *dev) -+{ -+ /* No special bus mastering setup handling */ -+} -+ -+static inline void pcibios_penalize_isa_irq(int irq) -+{ -+ /* We don't do dynamic PCI IRQ allocation */ -+} -+ -+#ifndef CONFIG_COLDFIRE -+/* The PCI address space does equal the physical memory -+ * address space. The networking and block device layers use -+ * this boolean for bounce buffer decisions. -+ */ -+#define PCI_DMA_BUS_IS_PHYS (1) -+ -+#define PCIBIOS_MIN_IO 0x00004000 -+#define PCIBIOS_MIN_MEM 0x04000000 -+ -+#else /* !CONFIG_COLDFIRE */ -+#include <asm-generic/pci-dma-compat.h> -+#define PCI_DMA_BASE /*0x40000000*/0 /* PCI-DMA window base */ -+ -+extern struct pci_bus_info *__init init_coldfire_pci(void); -+extern void * pci_alloc_son(struct pci_dev *, size_t, -+ dma_addr_t *, int); -+/* -+ * The PCI address space equal the virtual memory -+ * address space on m547X/m548X. -+ */ -+#define PCI_DMA_BUS_IS_PHYS (1) -+ -+#define PCIBIOS_MIN_IO 0x00000100 -+#define PCIBIOS_MIN_MEM 0x02000000 -+ -+struct scatterlist; -+ -+ -+/* This is always fine. */ -+#define pci_dac_dma_supported(pci_dev, mask) (1) -+ -+ -+/* These macros should be used after a pci_map_sg call has been done -+ * to get bus addresses of each of the SG entries and their lengths. -+ * You should only work with the number of sg entries pci_map_sg -+ * returns. -+ */ -+#define sg_dma_address(sg) ((sg)->dma_address) -+#define sg_dma_len(sg) ((sg)->length) -+ -+static inline void pcibios_align_resource(void *data, struct resource *res, unsigned long size, unsigned long align) -+{ -+} -+ -+#endif /* !CONFIG_COLDFIRE*/ -+#endif /* _ASM_M68K_548X_PCI_H */ ---- a/include/asm-m68k/atomic.h -+++ b/include/asm-m68k/atomic.h -@@ -2,7 +2,7 @@ - #define __ARCH_M68K_ATOMIC__ - - --#include <asm/system.h> -+#include <asm/system.h> /* local_irq_XXX() */ - - /* - * Atomic operations that C can't guarantee us. Useful for -@@ -21,12 +21,20 @@ typedef struct { int counter; } atomic_t - - static inline void atomic_add(int i, atomic_t *v) - { -+#ifndef CONFIG_COLDFIRE - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i)); -+#else -+ __asm__ __volatile__("addl %1,%0" : "=m" (*v) : "d" (i), "m" (*v)); -+#endif - } - - static inline void atomic_sub(int i, atomic_t *v) - { -+#ifndef CONFIG_COLDFIRE - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i)); -+#else -+ __asm__ __volatile__("subl %1,%0" : "=m" (*v) : "d" (i), "m" (*v)); -+#endif - } - - static inline void atomic_inc(atomic_t *v) -@@ -46,6 +54,14 @@ static inline int atomic_dec_and_test(at - return c != 0; - } - -+static __inline__ int atomic_dec_and_test_lt(volatile atomic_t *v) -+{ -+ char c; -+ __asm__ __volatile__("subql #1,%1; slt %0" : "=d" (c), "=m" (*v) -+ : "m" (*v)); -+ return c != 0 ; -+} -+ - static inline int atomic_inc_and_test(atomic_t *v) - { - char c; -@@ -156,7 +172,12 @@ static inline int atomic_sub_and_test(in - static inline int atomic_add_negative(int i, atomic_t *v) - { - char c; -+#ifndef CONFIG_COLDFIRE - __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i)); -+#else -+ __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "=m" (*v) -+ : "d" (i) , "m" (*v)); -+#endif - return c != 0; - } - ---- a/include/asm-m68k/auxvec.h -+++ b/include/asm-m68k/auxvec.h -@@ -1,4 +1,13 @@ - #ifndef __ASMm68k_AUXVEC_H - #define __ASMm68k_AUXVEC_H -+/* -+ * Architecture-neutral AT_ values in 0-17, leave some room -+ * for more of them. -+ */ -+ -+#ifdef CONFIG_VSYSCALL -+/* Entry point to the vsyscall page */ -+#define AT_SYSINFO_EHDR 33 -+#endif - - #endif ---- a/include/asm-m68k/bitops.h -+++ b/include/asm-m68k/bitops.h -@@ -19,6 +19,7 @@ - * - * They use the standard big-endian m680x0 bit ordering. - */ -+#ifndef CONFIG_COLDFIRE - - #define test_and_set_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ -@@ -457,4 +458,503 @@ static inline int ext2_find_next_bit(con - - #endif /* __KERNEL__ */ - -+#else /* CONFIG_COLDFIRE */ -+ -+#define test_and_set_bit(nr,vaddr) \ -+ (__builtin_constant_p(nr) ? \ -+ __constant_coldfire_test_and_set_bit(nr, vaddr) : \ -+ __generic_coldfire_test_and_set_bit(nr, vaddr)) -+ -+#if 0 -+static __inline__ int __constant_coldfire_test_and_set_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ -+ __asm__ __volatile__ ("bset %2,%1; sne %0" -+ : "=d" (retval), "+QUd" (*p) -+ : "di" (nr & 7)); -+ return retval; -+} -+#else -+static __inline__ int __constant_coldfire_test_and_set_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ __asm__ __volatile__ ("bset %2,(%4); sne %0" -+ : "=d" (retval), "=m" (*p) -+ : "di" (nr & 7), "m" (*p), "a" (p)); -+ return retval; -+} -+#endif -+ -+static __inline__ int __generic_coldfire_test_and_set_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ -+ __asm__ __volatile__ ("bset %2,%1; sne %0" -+ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) -+ : "d" (nr) -+ : "memory"); -+ return retval; -+} -+#define __test_and_set_bit(nr, vaddr) test_and_set_bit(nr, vaddr) -+ -+#define set_bit(nr,vaddr) \ -+ (__builtin_constant_p(nr) ? \ -+ __constant_coldfire_set_bit(nr, vaddr) : \ -+ __generic_coldfire_set_bit(nr, vaddr)) -+ -+#if 0 -+static __inline__ void __constant_coldfire_set_bit(int nr, -+ volatile void *vaddr) -+{ -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ __asm__ __volatile__ ("bset %1,%0" -+ : "+QUd" (*p) : "di" (nr & 7)); -+} -+#else -+static __inline__ void __constant_coldfire_set_bit(int nr, -+ volatile void *vaddr) -+{ -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ __asm__ __volatile__ ("bset %1,(%3)" -+ : "=m" (*p) : "di" (nr & 7), "m" (*p), "a" (p)); -+} -+#endif -+ -+static __inline__ void __generic_coldfire_set_bit(int nr, -+ volatile void *vaddr) -+{ -+ __asm__ __volatile__ ("bset %1,%0" -+ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) -+ : "d" (nr) -+ : "memory"); -+} -+#define __set_bit(nr, vaddr) set_bit(nr, vaddr) -+ -+#define test_and_clear_bit(nr, vaddr) \ -+ (__builtin_constant_p(nr) ? \ -+ __constant_coldfire_test_and_clear_bit(nr, vaddr) : \ -+ __generic_coldfire_test_and_clear_bit(nr, vaddr)) -+ -+#if 0 -+static __inline__ int __constant_coldfire_test_and_clear_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ -+ __asm__ __volatile__ ("bclr %2,%1; sne %0" -+ : "=d" (retval), "+QUd" (*p) -+ : "id" (nr & 7)); -+ -+ return retval; -+} -+#else -+static __inline__ int __constant_coldfire_test_and_clear_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ -+ __asm__ __volatile__ ("bclr %2,(%4); sne %0" -+ : "=d" (retval), "=m" (*p) -+ : "id" (nr & 7), "m" (*p), "a" (p)); -+ -+ return retval; -+} -+#endif -+ -+static __inline__ int __generic_coldfire_test_and_clear_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ -+ __asm__ __volatile__ ("bclr %2,%1; sne %0" -+ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) -+ : "d" (nr & 7) -+ : "memory"); -+ -+ return retval; -+} -+#define __test_and_clear_bit(nr, vaddr) test_and_clear_bit(nr, vaddr) -+ -+/* -+ * clear_bit() doesn't provide any barrier for the compiler. -+ */ -+#define smp_mb__before_clear_bit() barrier() -+#define smp_mb__after_clear_bit() barrier() -+ -+#define clear_bit(nr,vaddr) \ -+ (__builtin_constant_p(nr) ? \ -+ __constant_coldfire_clear_bit(nr, vaddr) : \ -+ __generic_coldfire_clear_bit(nr, vaddr)) -+ -+#if 0 -+static __inline__ void __constant_coldfire_clear_bit(int nr, -+ volatile void *vaddr) -+{ -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ __asm__ __volatile__ ("bclr %1,%0" -+ : "+QUd" (*p) : "id" (nr & 7)); -+} -+#else -+static __inline__ void __constant_coldfire_clear_bit(int nr, -+ volatile void *vaddr) -+{ -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ __asm__ __volatile__ ("bclr %1,(%3)" -+ : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p)); -+} -+#endif -+ -+static __inline__ void __generic_coldfire_clear_bit(int nr, -+ volatile void *vaddr) -+{ -+ __asm__ __volatile__ ("bclr %1,%0" -+ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) -+ : "d" (nr) -+ : "memory"); -+} -+#define __clear_bit(nr, vaddr) clear_bit(nr, vaddr) -+ -+#define test_and_change_bit(nr, vaddr) \ -+ (__builtin_constant_p(nr) ? \ -+ __constant_coldfire_test_and_change_bit(nr, vaddr) : \ -+ __generic_coldfire_test_and_change_bit(nr, vaddr)) -+ -+#if 0 -+static __inline__ int __constant_coldfire_test_and_change_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ -+ __asm__ __volatile__ ("bchg %2,%1; sne %0" -+ : "=d" (retval), "+QUd" (*p) -+ : "id" (nr & 7)); -+ -+ return retval; -+} -+#else -+static __inline__ int __constant_coldfire_test_and_change_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ -+ __asm__ __volatile__ ("bchg %2,(%4); sne %0" -+ : "=d" (retval), "=m" (*p) -+ : "id" (nr & 7), "m" (*p), "a" (p)); -+ -+ return retval; -+} -+#endif -+ -+static __inline__ int __generic_coldfire_test_and_change_bit(int nr, -+ volatile void *vaddr) -+{ -+ char retval; -+ -+ __asm__ __volatile__ ("bchg %2,%1; sne %0" -+ : "=d" (retval), "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) -+ : "id" (nr) -+ : "memory"); -+ -+ return retval; -+} -+#define __test_and_change_bit(nr, vaddr) test_and_change_bit(nr, vaddr) -+#define __change_bit(nr, vaddr) change_bit(nr, vaddr) -+ -+#define change_bit(nr,vaddr) \ -+ (__builtin_constant_p(nr) ? \ -+ __constant_coldfire_change_bit(nr, vaddr) : \ -+ __generic_coldfire_change_bit(nr, vaddr)) -+ -+#if 0 -+static __inline__ void __constant_coldfire_change_bit(int nr, -+ volatile void *vaddr) -+{ -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ __asm__ __volatile__ ("bchg %1,%0" -+ : "+QUd" (*p) : "id" (nr & 7)); -+} -+#else -+static __inline__ void __constant_coldfire_change_bit(int nr, -+ volatile void *vaddr) -+{ -+ volatile char *p = &((volatile char *)vaddr)[(nr^31) >> 3]; -+ __asm__ __volatile__ ("bchg %1,(%3)" -+ : "=m" (*p) : "id" (nr & 7), "m" (*p), "a" (p)); -+} -+#endif -+ -+static __inline__ void __generic_coldfire_change_bit(int nr, -+ volatile void *vaddr) -+{ -+ __asm__ __volatile__ ("bchg %1,%0" -+ : "=m" (((volatile char *)vaddr)[(nr^31) >> 3]) -+ : "d" (nr) -+ : "memory"); -+} -+ -+static inline int test_bit(int nr, const unsigned long *vaddr) -+{ -+ return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0; -+} -+ -+static __inline__ unsigned long ffz(unsigned long word) -+{ -+ unsigned long result = 0; -+ -+ while (word & 1) { -+ result++; -+ word >>= 1; -+ } -+ return result; -+} -+ -+/* find_next_zero_bit() finds the first zero bit in a bit string of length -+ * 'size' bits, starting the search at bit 'offset'. This is largely based -+ * on Linus's ALPHA routines. -+ */ -+static __inline__ unsigned long find_next_zero_bit(void *addr, -+ unsigned long size, unsigned long offset) -+{ -+ unsigned long *p = ((unsigned long *) addr) + (offset >> 5); -+ unsigned long result = offset & ~31UL; -+ unsigned long tmp; -+ -+ if (offset >= size) -+ return size; -+ size -= result; -+ offset &= 31UL; -+ if (offset) { -+ tmp = *(p++); -+ tmp |= ~0UL >> (32-offset); -+ if (size < 32) -+ goto found_first; -+ if (~tmp) -+ goto found_middle; -+ size -= 32; -+ result += 32; -+ } -+ while (size & ~31UL) { -+ tmp = *(p++); -+ if (~tmp) -+ goto found_middle; -+ result += 32; -+ size -= 32; -+ } -+ if (!size) -+ return result; -+ tmp = *p; -+ -+found_first: -+ tmp |= ~0UL >> size; -+found_middle: -+ return result + ffz(tmp); -+} -+ -+#define find_first_zero_bit(addr, size) find_next_zero_bit(((void *)addr), \ -+ (size), 0) -+ -+/* Ported from included/linux/bitops.h */ -+static __inline__ int ffs(int x) -+{ -+ int r = 1; -+ -+ if (!x) -+ return 0; -+ if (!(x & 0xffff)) { -+ x >>= 16; -+ r += 16; -+ } -+ if (!(x & 0xff)) { -+ x >>= 8; -+ r += 8; -+ } -+ if (!(x & 0xf)) { -+ x >>= 4; -+ r += 4; -+ } -+ if (!(x & 3)) { -+ x >>= 2; -+ r += 2; -+ } -+ if (!(x & 1)) { -+ x >>= 1; -+ r += 1; -+ } -+ return r; -+} -+#define __ffs(x) (ffs(x) - 1) -+ -+/* find_next_bit - find the next set bit in a memory region -+ * (from asm-ppc/bitops.h) -+ */ -+static __inline__ unsigned long find_next_bit(const unsigned long *addr, -+ unsigned long size, unsigned long offset) -+{ -+ unsigned int *p = ((unsigned int *) addr) + (offset >> 5); -+ unsigned int result = offset & ~31UL; -+ unsigned int tmp; -+ -+ if (offset >= size) -+ return size; -+ size -= result; -+ offset &= 31UL; -+ if (offset) { -+ tmp = *p++; -+ tmp &= ~0UL << offset; -+ if (size < 32) -+ goto found_first; -+ if (tmp) -+ goto found_middle; -+ size -= 32; -+ result += 32; -+ } -+ while (size >= 32) { -+ tmp = *p++; -+ if (tmp != 0) -+ goto found_middle; -+ result += 32; -+ size -= 32; -+ } -+ if (!size) -+ return result; -+ tmp = *p; -+ -+found_first: -+ tmp &= ~0UL >> (32 - size); -+ if (tmp == 0UL) /* Are any bits set? */ -+ return result + size; /* Nope. */ -+found_middle: -+ return result + __ffs(tmp); -+} -+ -+#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) -+ -+#ifdef __KERNEL__ -+ -+/* Ported from include/linux/bitops.h */ -+static __inline__ int fls(int x) -+{ -+ int r = 32; -+ -+ if (!x) -+ return 0; -+ if (!(x & 0xffff0000u)) { -+ x <<= 16; -+ r -= 16; -+ } -+ if (!(x & 0xff000000u)) { -+ x <<= 8; -+ r -= 8; -+ } -+ if (!(x & 0xf0000000u)) { -+ x <<= 4; -+ r -= 4; -+ } -+ if (!(x & 0xc0000000u)) { -+ x <<= 2; -+ r -= 2; -+ } -+ if (!(x & 0x80000000u)) { -+ x <<= 1; -+ r -= 1; -+ } -+ return r; -+} -+ -+#include <asm-generic/bitops/fls64.h> -+#include <asm-generic/bitops/sched.h> -+#include <asm-generic/bitops/hweight.h> -+#include <asm-generic/bitops/lock.h> -+ -+#define minix_find_first_zero_bit(addr, size) find_next_zero_bit((addr), \ -+ (size), 0) -+#define minix_test_and_set_bit(nr, addr) test_and_set_bit((nr), \ -+ (unsigned long *)(addr)) -+#define minix_set_bit(nr, addr) set_bit((nr), \ -+ (unsigned long *)(addr)) -+#define minix_test_and_clear_bit(nr, addr) test_and_clear_bit((nr), \ -+ (unsigned long *)(addr)) -+ -+static inline int minix_test_bit(int nr, const volatile unsigned long *vaddr) -+{ -+ int *a = (int *)vaddr; -+ int mask; -+ -+ a += nr >> 5; -+ mask = 1 << (nr & 0x1f); -+ return ((mask & *a) != 0); -+} -+ -+#define ext2_set_bit(nr, addr) test_and_set_bit((nr) ^ 24, \ -+ (unsigned long *)(addr)) -+#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, \ -+ (unsigned long *)(addr)) -+#define ext2_clear_bit(nr, addr) test_and_clear_bit((nr) ^ 24, \ -+ (unsigned long *)(addr)) -+#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, \ -+ (unsigned long *)(addr)) -+ -+static inline int ext2_test_bit(int nr, const void *vaddr) -+{ -+ const unsigned char *p = vaddr; -+ return (p[nr >> 3] & (1U << (nr & 7))) != 0; -+} -+ -+static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size) -+{ -+ const unsigned long *p = vaddr, *addr = vaddr; -+ int res; -+ -+ if (!size) -+ return 0; -+ -+ size = (size >> 5) + ((size & 31) > 0); -+ while (*p++ == ~0UL) { -+ if (--size == 0) -+ return (p - addr) << 5; -+ } -+ -+ --p; -+ for (res = 0; res < 32; res++) -+ if (!ext2_test_bit (res, p)) -+ break; -+ return (p - addr) * 32 + res; -+} -+ -+static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size, -+ unsigned offset) -+{ -+ const unsigned long *addr = vaddr; -+ const unsigned long *p = addr + (offset >> 5); -+ int bit = offset & 31UL, res; -+ -+ if (offset >= size) -+ return size; -+ -+ if (bit) { -+ /* Look for zero in first longword */ -+ for (res = bit; res < 32; res++) -+ if (!ext2_test_bit (res, p)) -+ return (p - addr) * 32 + res; -+ p++; -+ } -+ /* No zero yet, search remaining full bytes for a zero */ -+ res = ext2_find_first_zero_bit(p, size - 32 * (p - addr)); -+ return (p - addr) * 32 + res; -+} -+ -+#endif /* KERNEL */ -+ -+#endif /* CONFIG_COLDFIRE */ -+ - #endif /* _M68K_BITOPS_H */ ---- a/include/asm-m68k/bootinfo.h -+++ b/include/asm-m68k/bootinfo.h -@@ -19,11 +19,59 @@ - ** Redesign of the boot information structure; renamed to bootinfo.h again - ** 27/11/96 Geert Uytterhoeven: - ** Backwards compatibility with bootinfo interface version 1.0 -+** 12/03/08 Kurt Mahan -+** Copy the bd_info structure from uboot1.3.2/include/asm-m68k/u-boot.h -+** into this file. The original author is Wolfgang Denk, -+** DENX Software Engineering, wd@denx.de. - */ - - #ifndef _M68K_BOOTINFO_H - #define _M68K_BOOTINFO_H - -+#ifndef __ASSEMBLY__ -+/* -+ * UBoot Support -+ * -+ * bd_info structure from uboot1.3.2/include/asm-m68k/u-boot.h -+ */ -+struct bd_info { -+ unsigned long bi_memstart; /* start of DRAM memory */ -+ unsigned long bi_memsize; /* size of DRAM memory in bytes */ -+ unsigned long bi_flashstart; /* start of FLASH memory */ -+ unsigned long bi_flashsize; /* size of FLASH memory */ -+ unsigned long bi_flashoffset; /* reserved area for startup monitor */ -+ unsigned long bi_sramstart; /* start of SRAM memory */ -+ unsigned long bi_sramsize; /* size of SRAM memory */ -+ unsigned long bi_mbar_base; /* base of internal registers */ -+ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ -+ unsigned long bi_boot_params; /* where this board expects params */ -+ unsigned long bi_ip_addr; /* IP Address */ -+ unsigned char bi_enet0addr[6]; /* Ethernet 0 mac address */ -+ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ -+ unsigned long bi_intfreq; /* Internal Freq, in MHz */ -+ unsigned long bi_busfreq; /* Bus Freq, in MHz */ -+#ifdef UBOOT_PCI -+ unsigned long bi_pcifreq; /* pci Freq in MHz */ -+#endif -+#ifdef UBOOT_EXTRA_CLOCK -+ unsigned long bi_inpfreq; /* input Freq in MHz */ -+ unsigned long bi_vcofreq; /* vco Freq in MHz */ -+ unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ -+#endif -+ unsigned long bi_baudrate; /* Console Baudrate */ -+ unsigned char bi_enet1addr[6]; /* eth1 mac address */ -+ unsigned char bi_enet2addr[6]; /* eth2 mac address */ -+ unsigned char bi_enet3addr[6]; /* eth3 mac address */ -+}; -+ -+struct uboot_record { -+ struct bd_info *bdi; -+ unsigned long initrd_start; -+ unsigned long initrd_end; -+ unsigned long cmd_line_start; -+ unsigned long cmd_line_stop; -+}; -+#endif /* __ASSEMBLY__ */ - - /* - * Bootinfo definitions -@@ -49,6 +97,8 @@ struct bi_record { - #endif /* __ASSEMBLY__ */ - - -+ -+ - /* - * Tag Definitions - * ---- a/include/asm-m68k/byteorder.h -+++ b/include/asm-m68k/byteorder.h -@@ -4,8 +4,15 @@ - #include <asm/types.h> - #include <linux/compiler.h> - --#ifdef __GNUC__ -- -+#if defined(__GNUC__) -+#if defined(__mcfisaaplus__) || defined(__mcfisac__) -+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val) -+{ -+ __asm__ ("byterev %0" : "=d" (val) : "0" (val)); -+ return val; -+} -+#define __arch__swab32(x) ___arch__swab32(x) -+#elif !defined(__mcoldfire__) - static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 val) - { - __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); -@@ -14,6 +21,7 @@ static __inline__ __attribute_const__ __ - #define __arch__swab32(x) ___arch__swab32(x) - - #endif -+#endif - - #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) - # define __BYTEORDER_HAS_U64__ ---- a/include/asm-m68k/cacheflush.h -+++ b/include/asm-m68k/cacheflush.h -@@ -6,6 +6,9 @@ - /* cache code */ - #define FLUSH_I_AND_D (0x00000808) - #define FLUSH_I (0x00000008) -+#ifdef CONFIG_COLDFIRE -+#include <asm/cf_cacheflush.h> -+#else /* !CONFIG_COLDFIRE */ - - /* - * Cache handling functions -@@ -153,4 +156,5 @@ static inline void copy_from_user_page(s - memcpy(dst, src, len); - } - -+#endif /* !CONFIG_COLDFIRE */ - #endif /* _M68K_CACHEFLUSH_H */ ---- /dev/null -+++ b/include/asm-m68k/cf_5445x_cacheflush.h -@@ -0,0 +1,447 @@ -+/* -+ * include/asm-m68k/cf_5445x_cacheflush.h - Coldfire 5445x Cache -+ * -+ * Based on include/asm-m68k/cacheflush.h -+ * -+ * Coldfire pieces by: -+ * Kurt Mahan kmahan@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007, 2008 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+#ifndef M68K_CF_5445x_CACHEFLUSH_H -+#define M68K_CF_5445x_CACHEFLUSH_H -+ -+#include <asm/cfcache.h> -+ -+/* -+ * Coldfire Cache Model -+ * -+ * The Coldfire processors use a Harvard architecture cache configured -+ * as four-way set associative. The cache does not implement bus snooping -+ * so cache coherency with other masters must be maintained in software. -+ * -+ * The cache is managed via the CPUSHL instruction in conjunction with -+ * bits set in the CACR (cache control register). Currently the code -+ * uses the CPUSHL enhancement which adds the ability to -+ * invalidate/clear/push a cacheline by physical address. This feature -+ * is designated in the Hardware Configuration Register [D1-CPES]. -+ * -+ * CACR Bits: -+ * DPI[28] cpushl invalidate disable for d-cache -+ * IDPI[12] cpushl invalidate disable for i-cache -+ * SPA[14] cpushl search by physical address -+ * IVO[20] cpushl invalidate only -+ * -+ * Random Terminology: -+ * * invalidate = reset the cache line's valid bit -+ * * push = generate a line-sized store of the data if its contents are marked -+ * as modifed (the modified flag is cleared after the store) -+ * * clear = push + invalidate -+ */ -+ -+/** -+ * flush_icache - Flush all of the instruction cache -+ */ -+static inline void flush_icache(void) -+{ -+ asm volatile("nop\n" -+ "moveq%.l #0,%%d0\n" -+ "moveq%.l #0,%%d1\n" -+ "move%.l %%d0,%%a0\n" -+ "1:\n" -+ "cpushl %%ic,(%%a0)\n" -+ "add%.l #0x0010,%%a0\n" -+ "addq%.l #1,%%d1\n" -+ "cmpi%.l %0,%%d1\n" -+ "bne 1b\n" -+ "moveq%.l #0,%%d1\n" -+ "addq%.l #1,%%d0\n" -+ "move%.l %%d0,%%a0\n" -+ "cmpi%.l #4,%%d0\n" -+ "bne 1b\n" -+ : : "i" (CACHE_SETS) -+ : "a0", "d0", "d1"); -+} -+ -+/** -+ * flush_dcache - Flush all of the data cache -+ */ -+static inline void flush_dcache(void) -+{ -+ asm volatile("nop\n" -+ "moveq%.l #0,%%d0\n" -+ "moveq%.l #0,%%d1\n" -+ "move%.l %%d0,%%a0\n" -+ "1:\n" -+ "cpushl %%dc,(%%a0)\n" -+ "add%.l #0x0010,%%a0\n" -+ "addq%.l #1,%%d1\n" -+ "cmpi%.l %0,%%d1\n" -+ "bne 1b\n" -+ "moveq%.l #0,%%d1\n" -+ "addq%.l #1,%%d0\n" -+ "move%.l %%d0,%%a0\n" -+ "cmpi%.l #4,%%d0\n" -+ "bne 1b\n" -+ : : "i" (CACHE_SETS) -+ : "a0", "d0", "d1"); -+} -+ -+/** -+ * flush_bcache - Flush all of both caches -+ */ -+static inline void flush_bcache(void) -+{ -+ asm volatile("nop\n" -+ "moveq%.l #0,%%d0\n" -+ "moveq%.l #0,%%d1\n" -+ "move%.l %%d0,%%a0\n" -+ "1:\n" -+ "cpushl %%bc,(%%a0)\n" -+ "add%.l #0x0010,%%a0\n" -+ "addq%.l #1,%%d1\n" -+ "cmpi%.l %0,%%d1\n" -+ "bne 1b\n" -+ "moveq%.l #0,%%d1\n" -+ "addq%.l #1,%%d0\n" -+ "move%.l %%d0,%%a0\n" -+ "cmpi%.l #4,%%d0\n" -+ "bne 1b\n" -+ : : "i" (CACHE_SETS) -+ : "a0", "d0", "d1"); -+} -+ -+/** -+ * cf_cache_clear - invalidate cache -+ * @paddr: starting physical address -+ * @len: number of bytes -+ * -+ * Invalidate cache lines starting at paddr for len bytes. -+ * Those lines are not pushed. -+ */ -+static inline void cf_cache_clear(unsigned long paddr, int len) -+{ -+ /* number of lines */ -+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE; -+ if (len == 0) -+ return; -+ -+ /* align on set boundary */ -+ paddr &= 0xfffffff0; -+ -+ asm volatile("nop\n" -+ "move%.l %2,%%d0\n" -+ "or%.l %3,%%d0\n" -+ "movec %%d0,%%cacr\n" -+ "move%.l %0,%%a0\n" -+ "move%.l %1,%%d0\n" -+ "1:\n" -+ "cpushl %%bc,(%%a0)\n" -+ "lea 0x10(%%a0),%%a0\n" -+ "subq%.l #1,%%d0\n" -+ "bne%.b 1b\n" -+ "movec %2,%%cacr\n" -+ : : "a" (paddr), "r" (len), -+ "r" (shadow_cacr), -+ "i" (CF_CACR_SPA+CF_CACR_IVO) -+ : "a0", "d0"); -+} -+ -+/** -+ * cf_cache_push - Push dirty cache out with no invalidate -+ * @paddr: starting physical address -+ * @len: number of bytes -+ * -+ * Push the any dirty lines starting at paddr for len bytes. -+ * Those lines are not invalidated. -+ */ -+static inline void cf_cache_push(unsigned long paddr, int len) -+{ -+ /* number of lines */ -+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE; -+ if (len == 0) -+ return; -+ -+ /* align on set boundary */ -+ paddr &= 0xfffffff0; -+ -+ asm volatile("nop\n" -+ "move%.l %2,%%d0\n" -+ "or%.l %3,%%d0\n" -+ "movec %%d0,%%cacr\n" -+ "move%.l %0,%%a0\n" -+ "move%.l %1,%%d0\n" -+ "1:\n" -+ "cpushl %%bc,(%%a0)\n" -+ "lea 0x10(%%a0),%%a0\n" -+ "subq%.l #1,%%d0\n" -+ "bne.b 1b\n" -+ "movec %2,%%cacr\n" -+ : : "a" (paddr), "r" (len), -+ "r" (shadow_cacr), -+ "i" (CF_CACR_SPA+CF_CACR_DPI+CF_CACR_IDPI) -+ : "a0", "d0"); -+} -+ -+/** -+ * cf_cache_flush - Push dirty cache out and invalidate -+ * @paddr: starting physical address -+ * @len: number of bytes -+ * -+ * Push the any dirty lines starting at paddr for len bytes and -+ * invalidate those lines. -+ */ -+static inline void cf_cache_flush(unsigned long paddr, int len) -+{ -+ /* number of lines */ -+ len = (len + (CACHE_LINE_SIZE-1)) / CACHE_LINE_SIZE; -+ if (len == 0) -+ return; -+ -+ /* align on set boundary */ -+ paddr &= 0xfffffff0; -+ -+ asm volatile("nop\n" -+ "move%.l %2,%%d0\n" -+ "or%.l %3,%%d0\n" -+ "movec %%d0,%%cacr\n" -+ "move%.l %0,%%a0\n" -+ "move%.l %1,%%d0\n" -+ "1:\n" -+ "cpushl %%bc,(%%a0)\n" -+ "lea 0x10(%%a0),%%a0\n" -+ "subq%.l #1,%%d0\n" -+ "bne.b 1b\n" -+ "movec %2,%%cacr\n" -+ : : "a" (paddr), "r" (len), -+ "r" (shadow_cacr), -+ "i" (CF_CACR_SPA) -+ : "a0", "d0"); -+} -+ -+/** -+ * cf_cache_flush_range - Push dirty data/inst cache in range out and invalidate -+ * @vstart - starting virtual address -+ * @vend: ending virtual address -+ * -+ * Push the any dirty data/instr lines starting at paddr for len bytes and -+ * invalidate those lines. -+ */ -+static inline void cf_cache_flush_range(unsigned long vstart, unsigned long vend) -+{ -+ int len; -+ -+ /* align on set boundary */ -+ vstart &= 0xfffffff0; -+ vend = PAGE_ALIGN((vend + (CACHE_LINE_SIZE-1))) & 0xfffffff0; -+ len = vend - vstart; -+ if (len == 0) -+ return; -+ vstart = __pa(vstart); -+ vend = vstart + len; -+ -+ asm volatile("nop\n" -+ "move%.l %2,%%d0\n" -+ "or%.l %3,%%d0\n" -+ "movec %%d0,%%cacr\n" -+ "move%.l %0,%%a0\n" -+ "move%.l %1,%%a1\n" -+ "1:\n" -+ "cpushl %%bc,(%%a0)\n" -+ "lea 0x10(%%a0),%%a0\n" -+ "cmpa%.l %%a0,%%a1\n" -+ "bne.b 1b\n" -+ "movec %2,%%cacr\n" -+ : /* no return */ -+ : "a" (vstart), "a" (vend), -+ "r" (shadow_cacr), -+ "i" (CF_CACR_SPA) -+ : "a0", "a1", "d0"); -+} -+ -+/** -+ * cf_dcache_flush_range - Push dirty data cache in range out and invalidate -+ * @vstart - starting virtual address -+ * @vend: ending virtual address -+ * -+ * Push the any dirty data lines starting at paddr for len bytes and -+ * invalidate those lines. -+ */ -+static inline void cf_dcache_flush_range(unsigned long vstart, unsigned long vend) -+{ -+ /* align on set boundary */ -+ vstart &= 0xfffffff0; -+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0; -+ -+ asm volatile("nop\n" -+ "move%.l %2,%%d0\n" -+ "or%.l %3,%%d0\n" -+ "movec %%d0,%%cacr\n" -+ "move%.l %0,%%a0\n" -+ "move%.l %1,%%a1\n" -+ "1:\n" -+ "cpushl %%dc,(%%a0)\n" -+ "lea 0x10(%%a0),%%a0\n" -+ "cmpa%.l %%a0,%%a1\n" -+ "bne.b 1b\n" -+ "movec %2,%%cacr\n" -+ : /* no return */ -+ : "a" (__pa(vstart)), "a" (__pa(vend)), -+ "r" (shadow_cacr), -+ "i" (CF_CACR_SPA) -+ : "a0", "a1", "d0"); -+} -+ -+/** -+ * cf_icache_flush_range - Push dirty inst cache in range out and invalidate -+ * @vstart - starting virtual address -+ * @vend: ending virtual address -+ * -+ * Push the any dirty instr lines starting at paddr for len bytes and -+ * invalidate those lines. This should just be an invalidate since you -+ * shouldn't be able to have dirty instruction cache. -+ */ -+static inline void cf_icache_flush_range(unsigned long vstart, unsigned long vend) -+{ -+ /* align on set boundary */ -+ vstart &= 0xfffffff0; -+ vend = (vend + (CACHE_LINE_SIZE-1)) & 0xfffffff0; -+ -+ asm volatile("nop\n" -+ "move%.l %2,%%d0\n" -+ "or%.l %3,%%d0\n" -+ "movec %%d0,%%cacr\n" -+ "move%.l %0,%%a0\n" -+ "move%.l %1,%%a1\n" -+ "1:\n" -+ "cpushl %%ic,(%%a0)\n" -+ "lea 0x10(%%a0),%%a0\n" -+ "cmpa%.l %%a0,%%a1\n" -+ "bne.b 1b\n" -+ "movec %2,%%cacr\n" -+ : /* no return */ -+ : "a" (__pa(vstart)), "a" (__pa(vend)), -+ "r" (shadow_cacr), -+ "i" (CF_CACR_SPA) -+ : "a0", "a1", "d0"); -+} -+ -+/** -+ * flush_cache_mm - Flush an mm_struct -+ * @mm: mm_struct to flush -+ */ -+static inline void flush_cache_mm(struct mm_struct *mm) -+{ -+ if (mm == current->mm) -+ flush_bcache(); -+} -+ -+#define flush_cache_dup_mm(mm) flush_cache_mm(mm) -+ -+/** -+ * flush_cache_range - Flush a cache range -+ * @vma: vma struct -+ * @start: Starting address -+ * @end: Ending address -+ * -+ * flush_cache_range must be a macro to avoid a dependency on -+ * linux/mm.h which includes this file. -+ */ -+static inline void flush_cache_range(struct vm_area_struct *vma, -+ unsigned long start, unsigned long end) -+{ -+ if (vma->vm_mm == current->mm) -+ cf_cache_flush_range(start, end); -+} -+ -+/** -+ * flush_cache_page - Flush a page of the cache -+ * @vma: vma struct -+ * @vmaddr: -+ * @pfn: page numer -+ * -+ * flush_cache_page must be a macro to avoid a dependency on -+ * linux/mm.h which includes this file. -+ */ -+static inline void flush_cache_page(struct vm_area_struct *vma, -+ unsigned long vmaddr, unsigned long pfn) -+{ -+ if (vma->vm_mm == current->mm) -+ cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE); -+} -+ -+/** -+ * __flush_page_to_ram - Push a page out of the cache -+ * @vaddr: Virtual address at start of page -+ * -+ * Push the page at kernel virtual address *vaddr* and clear -+ * the icache. -+ */ -+static inline void __flush_page_to_ram(void *vaddr) -+{ -+ asm volatile("nop\n" -+ "move%.l %2,%%d0\n" -+ "or%.l %3,%%d0\n" -+ "movec %%d0,%%cacr\n" -+ "move%.l %0,%%d0\n" -+ "and%.l #0xfffffff0,%%d0\n" -+ "move%.l %%d0,%%a0\n" -+ "move%.l %1,%%d0\n" -+ "1:\n" -+ "cpushl %%bc,(%%a0)\n" -+ "lea 0x10(%%a0),%%a0\n" -+ "subq%.l #1,%%d0\n" -+ "bne.b 1b\n" -+ "movec %2,%%cacr\n" -+ : : "a" (__pa(vaddr)), "i" (PAGE_SIZE / CACHE_LINE_SIZE), -+ "r" (shadow_cacr), "i" (CF_CACR_SPA) -+ : "a0", "d0"); -+} -+ -+/* -+ * Various defines for the kernel. -+ */ -+ -+extern void cache_clear(unsigned long paddr, int len); -+extern void cache_push(unsigned long paddr, int len); -+extern void flush_icache_range(unsigned long address, unsigned long endaddr); -+ -+#define flush_cache_all() flush_bcache() -+#define flush_cache_vmap(start, end) flush_bcache() -+#define flush_cache_vunmap(start, end) flush_bcache() -+ -+#define flush_dcache_range(vstart, vend) cf_dcache_flush_range(vstart, vend) -+#define flush_dcache_page(page) __flush_page_to_ram(page_address(page)) -+#define flush_dcache_mmap_lock(mapping) do { } while (0) -+#define flush_dcache_mmap_unlock(mapping) do { } while (0) -+ -+#define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page)) -+ -+/** -+ * copy_to_user_page - Copy memory to user page -+ */ -+static inline void copy_to_user_page(struct vm_area_struct *vma, -+ struct page *page, unsigned long vaddr, -+ void *dst, void *src, int len) -+{ -+ memcpy(dst, src, len); -+ cf_cache_flush(page_to_phys(page), PAGE_SIZE); -+} -+ -+/** -+ * copy_from_user_page - Copy memory from user page -+ */ -+static inline void copy_from_user_page(struct vm_area_struct *vma, -+ struct page *page, unsigned long vaddr, -+ void *dst, void *src, int len) -+{ -+ cf_cache_flush(page_to_phys(page), PAGE_SIZE); -+ memcpy(dst, src, len); -+} -+ -+#endif /* M68K_CF_5445x_CACHEFLUSH_H */ ---- /dev/null -+++ b/include/asm-m68k/cf_548x_cacheflush.h -@@ -0,0 +1,259 @@ -+/* -+ * include/asm-m68k/cf_548x_cacheflush.h - Coldfire 547x/548x Cache -+ * -+ * Based on include/asm-m68k/cacheflush.h -+ * -+ * Coldfire pieces by: -+ * Kurt Mahan kmahan@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007, 2008 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+#ifndef M68K_CF_548x_CACHEFLUSH_H -+#define M68K_CF_548x_CACHEFLUSH_H -+ -+#include <asm/cfcache.h> -+/* -+ * Cache handling functions -+ */ -+ -+#define flush_icache() \ -+({ \ -+ unsigned long set; \ -+ unsigned long start_set; \ -+ unsigned long end_set; \ -+ \ -+ start_set = 0; \ -+ end_set = (unsigned long)LAST_DCACHE_ADDR; \ -+ \ -+ for (set = start_set; set <= end_set; set += (0x10 - 3)) { \ -+ asm volatile("cpushl %%ic,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%ic,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%ic,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set)); \ -+ } \ -+}) -+ -+#define flush_dcache() \ -+({ \ -+ unsigned long set; \ -+ unsigned long start_set; \ -+ unsigned long end_set; \ -+ \ -+ start_set = 0; \ -+ end_set = (unsigned long)LAST_DCACHE_ADDR; \ -+ \ -+ for (set = start_set; set <= end_set; set += (0x10 - 3)) { \ -+ asm volatile("cpushl %%dc,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%dc,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%dc,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%dc,(%0)" : "=a" (set) : "a" (set)); \ -+ } \ -+}) -+ -+#define flush_bcache() \ -+({ \ -+ unsigned long set; \ -+ unsigned long start_set; \ -+ unsigned long end_set; \ -+ \ -+ start_set = 0; \ -+ end_set = (unsigned long)LAST_DCACHE_ADDR; \ -+ \ -+ for (set = start_set; set <= end_set; set += (0x10 - 3)) { \ -+ asm volatile("cpushl %%bc,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%bc,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%bc,(%0)\n" \ -+ "\taddq%.l #1,%0\n" \ -+ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set)); \ -+ } \ -+}) -+ -+/* -+ * invalidate the cache for the specified memory range. -+ * It starts at the physical address specified for -+ * the given number of bytes. -+ */ -+extern void cache_clear(unsigned long paddr, int len); -+/* -+ * push any dirty cache in the specified memory range. -+ * It starts at the physical address specified for -+ * the given number of bytes. -+ */ -+extern void cache_push(unsigned long paddr, int len); -+ -+/* -+ * push and invalidate pages in the specified user virtual -+ * memory range. -+ */ -+extern void cache_push_v(unsigned long vaddr, int len); -+ -+/* This is needed whenever the virtual mapping of the current -+ process changes. */ -+ -+/** -+ * flush_cache_mm - Flush an mm_struct -+ * @mm: mm_struct to flush -+ */ -+static inline void flush_cache_mm(struct mm_struct *mm) -+{ -+ if (mm == current->mm) -+ flush_bcache(); -+} -+ -+#define flush_cache_dup_mm(mm) flush_cache_mm(mm) -+ -+#define flush_cache_all() flush_bcache() -+ -+/** -+ * flush_cache_range - Flush a cache range -+ * @vma: vma struct -+ * @start: Starting address -+ * @end: Ending address -+ * -+ * flush_cache_range must be a macro to avoid a dependency on -+ * linux/mm.h which includes this file. -+ */ -+static inline void flush_cache_range(struct vm_area_struct *vma, -+ unsigned long start, unsigned long end) -+{ -+ if (vma->vm_mm == current->mm) -+ flush_bcache(); -+// cf_cache_flush_range(start, end); -+} -+ -+/** -+ * flush_cache_page - Flush a page of the cache -+ * @vma: vma struct -+ * @vmaddr: -+ * @pfn: page numer -+ * -+ * flush_cache_page must be a macro to avoid a dependency on -+ * linux/mm.h which includes this file. -+ */ -+static inline void flush_cache_page(struct vm_area_struct *vma, -+ unsigned long vmaddr, unsigned long pfn) -+{ -+ if (vma->vm_mm == current->mm) -+ flush_bcache(); -+// cf_cache_flush_range(vmaddr, vmaddr+PAGE_SIZE); -+} -+ -+/* Push the page at kernel virtual address and clear the icache */ -+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ -+#define flush_page_to_ram(page) __flush_page_to_ram((void *) page_address(page)) -+extern inline void __flush_page_to_ram(void *address) -+{ -+ unsigned long set; -+ unsigned long start_set; -+ unsigned long end_set; -+ unsigned long addr = (unsigned long) address; -+ -+ addr &= ~(PAGE_SIZE - 1); /* round down to page start address */ -+ -+ start_set = addr & _ICACHE_SET_MASK; -+ end_set = (addr + PAGE_SIZE-1) & _ICACHE_SET_MASK; -+ -+ if (start_set > end_set) { -+ /* from the begining to the lowest address */ -+ for (set = 0; set <= end_set; set += (0x10 - 3)) { -+ asm volatile("cpushl %%bc,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%bc,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%bc,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set)); -+ } -+ /* next loop will finish the cache ie pass the hole */ -+ end_set = LAST_ICACHE_ADDR; -+ } -+ for (set = start_set; set <= end_set; set += (0x10 - 3)) { -+ asm volatile("cpushl %%bc,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%bc,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%bc,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%bc,(%0)" : "=a" (set) : "a" (set)); -+ } -+} -+ -+/* Use __flush_page_to_ram() for flush_dcache_page all values are same - MW */ -+#define flush_dcache_page(page) \ -+ __flush_page_to_ram((void *) page_address(page)) -+#define flush_icache_page(vma,pg) \ -+ __flush_page_to_ram((void *) page_address(pg)) -+#define flush_icache_user_range(adr,len) do { } while (0) -+/* NL */ -+#define flush_icache_user_page(vma,page,addr,len) do { } while (0) -+ -+/* Push n pages at kernel virtual address and clear the icache */ -+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ -+extern inline void flush_icache_range (unsigned long address, -+ unsigned long endaddr) -+{ -+ unsigned long set; -+ unsigned long start_set; -+ unsigned long end_set; -+ -+ start_set = address & _ICACHE_SET_MASK; -+ end_set = endaddr & _ICACHE_SET_MASK; -+ -+ if (start_set > end_set) { -+ /* from the begining to the lowest address */ -+ for (set = 0; set <= end_set; set += (0x10 - 3)) { -+ asm volatile("cpushl %%ic,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%ic,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%ic,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set)); -+ } -+ /* next loop will finish the cache ie pass the hole */ -+ end_set = LAST_ICACHE_ADDR; -+ } -+ for (set = start_set; set <= end_set; set += (0x10 - 3)) { -+ asm volatile("cpushl %%ic,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%ic,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%ic,(%0)\n" -+ "\taddq%.l #1,%0\n" -+ "\tcpushl %%ic,(%0)" : "=a" (set) : "a" (set)); -+ } -+} -+ -+static inline void copy_to_user_page(struct vm_area_struct *vma, -+ struct page *page, unsigned long vaddr, -+ void *dst, void *src, int len) -+{ -+ memcpy(dst, src, len); -+ flush_icache_user_page(vma, page, vaddr, len); -+} -+static inline void copy_from_user_page(struct vm_area_struct *vma, -+ struct page *page, unsigned long vaddr, -+ void *dst, void *src, int len) -+{ -+ memcpy(dst, src, len); -+} -+ -+#define flush_cache_vmap(start, end) flush_cache_all() -+#define flush_cache_vunmap(start, end) flush_cache_all() -+#define flush_dcache_mmap_lock(mapping) do { } while (0) -+#define flush_dcache_mmap_unlock(mapping) do { } while (0) -+ -+#endif /* M68K_CF_548x_CACHEFLUSH_H */ ---- /dev/null -+++ b/include/asm-m68k/cf_cacheflush.h -@@ -0,0 +1,10 @@ -+#ifndef M68K_CF_CACHEFLUSH_H -+#define M68K_CF_CACHEFLUSH_H -+ -+#ifdef CONFIG_M5445X -+#include "cf_5445x_cacheflush.h" -+#else -+#include "cf_548x_cacheflush.h" -+#endif -+ -+#endif /* M68K_CF_CACHEFLUSH_H */ ---- /dev/null -+++ b/include/asm-m68k/cfcache.h -@@ -0,0 +1,114 @@ -+/* -+ * include/asm-m68k/cfcache.h - Coldfire Cache Controller -+ * -+ * Kurt Mahan kmahan@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+#ifndef CF_CFCACHE_H -+#define CF_CFCACHE_H -+ -+/* -+ * CACR Cache Control Register -+ */ -+#define CF_CACR_DEC (0x80000000) /* Data Cache Enable */ -+#define CF_CACR_DW (0x40000000) /* Data default Write-protect */ -+#define CF_CACR_DESB (0x20000000) /* Data Enable Store Buffer */ -+#define CF_CACR_DPI (0x10000000) /* Data Disable CPUSHL Invalidate */ -+#define CF_CACR_DHLCK (0x08000000) /* 1/2 Data Cache Lock Mode */ -+#define CF_CACR_DDCM_00 (0x00000000) /* Cacheable writethrough imprecise */ -+#define CF_CACR_DDCM_01 (0x02000000) /* Cacheable copyback */ -+#define CF_CACR_DDCM_10 (0x04000000) /* Noncacheable precise */ -+#define CF_CACR_DDCM_11 (0x06000000) /* Noncacheable imprecise */ -+#define CF_CACR_DCINVA (0x01000000) /* Data Cache Invalidate All */ -+#define CF_CACR_DDSP (0x00800000) /* Data default supervisor-protect */ -+#define CF_CACR_IVO (0x00100000) /* Invalidate only */ -+#define CF_CACR_BEC (0x00080000) /* Branch Cache Enable */ -+#define CF_CACR_BCINVA (0x00040000) /* Branch Cache Invalidate All */ -+#define CF_CACR_IEC (0x00008000) /* Instruction Cache Enable */ -+#define CF_CACR_SPA (0x00004000) /* Search by Physical Address */ -+#define CF_CACR_DNFB (0x00002000) /* Default cache-inhibited fill buf */ -+#define CF_CACR_IDPI (0x00001000) /* Instr Disable CPUSHL Invalidate */ -+#define CF_CACR_IHLCK (0x00000800) /* 1/2 Instruction Cache Lock Mode */ -+#define CF_CACR_IDCM (0x00000400) /* Noncacheable Instr default mode */ -+#define CF_CACR_ICINVA (0x00000100) /* Instr Cache Invalidate All */ -+#define CF_CACR_IDSP (0x00000080) /* Ins default supervisor-protect */ -+#define CF_CACR_EUSP (0x00000020) /* Switch stacks in user mode */ -+ -+#ifdef CONFIG_M5445X -+/* -+ * M5445x Cache Configuration -+ * - cache line size is 16 bytes -+ * - cache is 4-way set associative -+ * - each cache has 256 sets (64k / 16bytes / 4way) -+ * - I-Cache size is 16KB -+ * - D-Cache size is 16KB -+ */ -+#define ICACHE_SIZE 0x4000 /* instruction - 16k */ -+#define DCACHE_SIZE 0x4000 /* data - 16k */ -+ -+#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */ -+#define CACHE_SETS 0x0100 /* 256 sets */ -+#define CACHE_WAYS 0x0004 /* 4 way */ -+ -+#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+ \ -+ CF_CACR_BCINVA+ \ -+ CF_CACR_ICINVA) -+ -+#ifndef CONFIG_M5445X_DISABLE_CACHE -+#define CACHE_INITIAL_MODE (CF_CACR_DEC+ \ -+ CF_CACR_BEC+ \ -+ CF_CACR_IEC+ \ -+ CF_CACR_DESB+ \ -+ CF_CACR_EUSP) -+#else -+/* cache disabled for testing */ -+#define CACHE_INITIAL_MODE (CF_CACR_EUSP) -+#endif /* CONFIG_M5445X_DISABLE_CACHE */ -+ -+#elif defined(CONFIG_M547X_8X) -+/* -+ * M547x/M548x Cache Configuration -+ * - cache line size is 16 bytes -+ * - cache is 4-way set associative -+ * - each cache has 512 sets (128k / 16bytes / 4way) -+ * - I-Cache size is 32KB -+ * - D-Cache size is 32KB -+ */ -+#define ICACHE_SIZE 0x8000 /* instruction - 32k */ -+#define DCACHE_SIZE 0x8000 /* data - 32k */ -+ -+#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */ -+#define CACHE_SETS 0x0200 /* 512 sets */ -+#define CACHE_WAYS 0x0004 /* 4 way */ -+ -+/* in for the old cpushl caching code */ -+#define _DCACHE_SET_MASK ((DCACHE_SIZE/64-1)<<CACHE_WAYS) -+#define _ICACHE_SET_MASK ((ICACHE_SIZE/64-1)<<CACHE_WAYS) -+#define LAST_DCACHE_ADDR _DCACHE_SET_MASK -+#define LAST_ICACHE_ADDR _ICACHE_SET_MASK -+ -+#define CACHE_DISABLE_MODE (CF_CACR_DCINVA+ \ -+ CF_CACR_BCINVA+ \ -+ CF_CACR_ICINVA) -+ -+#define CACHE_INITIAL_MODE (CF_CACR_DEC+ \ -+ CF_CACR_BEC+ \ -+ CF_CACR_IEC+ \ -+ CF_CACR_DESB+ \ -+ CF_CACR_EUSP) -+#endif /* CONFIG_M547X_8X */ -+ -+#ifndef __ASSEMBLY__ -+ -+extern unsigned long shadow_cacr; -+extern void cacr_set(unsigned long x); -+ -+#endif /* !__ASSEMBLY__ */ -+ -+#endif /* CF_CACHE_H */ ---- /dev/null -+++ b/include/asm-m68k/cf_entry.h -@@ -0,0 +1,146 @@ -+#ifndef __CF_M68K_ENTRY_H -+#define __CF_M68K_ENTRY_H -+ -+#include <asm/setup.h> -+#include <asm/page.h> -+#include <asm/coldfire.h> -+#include <asm/cfmmu.h> -+#include <asm/asm-offsets.h> -+ -+/* -+ * Stack layout in 'ret_from_exception': -+ * -+ * This allows access to the syscall arguments in registers d1-d5 -+ * -+ * 0(sp) - d1 -+ * 4(sp) - d2 -+ * 8(sp) - d3 -+ * C(sp) - d4 -+ * 10(sp) - d5 -+ * 14(sp) - a0 -+ * 18(sp) - a1 -+ * 1C(sp) - a2 -+ * 20(sp) - d0 -+ * 24(sp) - orig_d0 -+ * 28(sp) - stack adjustment -+ * 2C(sp) - sr -+ * 2E(sp) - pc -+ * 32(sp) - format & vector -+ * 36(sp) - MMUSR -+ * 3A(sp) - MMUAR -+ */ -+ -+/* -+ * 97/05/14 Andreas: Register %a2 is now set to the current task throughout -+ * the whole kernel. -+ */ -+ -+/* the following macro is used when enabling interrupts */ -+/* portable version */ -+#define ALLOWINT (~0x700) -+#define MAX_NOINT_IPL 0 -+ -+#ifdef __ASSEMBLY__ -+ -+#define curptr a2 -+ -+LFLUSH_I_AND_D = 0x00000808 -+LSIGTRAP = 5 -+ -+/* process bits for task_struct.ptrace */ -+PT_TRACESYS_OFF = 3 -+PT_TRACESYS_BIT = 1 -+PT_PTRACED_OFF = 3 -+PT_PTRACED_BIT = 0 -+PT_DTRACE_OFF = 3 -+PT_DTRACE_BIT = 2 -+ -+#define SAVE_ALL_INT save_all_int -+#define SAVE_ALL_SYS save_all_sys -+#define RESTORE_ALL restore_all -+/* -+ * This defines the normal kernel pt-regs layout. -+ * -+ * regs a3-a6 and d6-d7 are preserved by C code -+ * the kernel doesn't mess with usp unless it needs to -+ */ -+ -+/* -+ * a -1 in the orig_d0 field signifies -+ * that the stack frame is NOT for syscall -+ */ -+.macro save_all_int -+ movel MMUSR,%sp@- -+ movel MMUAR,%sp@- -+ clrl %sp@- | stk_adj -+ pea -1:w | orig d0 -+ movel %d0,%sp@- | d0 -+ subal #(8*4), %sp -+ moveml %d1-%d5/%a0-%a1/%curptr,%sp@ -+.endm -+ -+.macro save_all_sys -+ movel MMUSR,%sp@- -+ movel MMUAR,%sp@- -+ clrl %sp@- | stk_adj -+ movel %d0,%sp@- | orig d0 -+ movel %d0,%sp@- | d0 -+ subal #(8*4), %sp -+ moveml %d1-%d5/%a0-%a1/%curptr,%sp@ -+.endm -+ -+.macro restore_all -+ moveml %sp@,%a0-%a1/%curptr/%d1-%d5 -+ addal #(8*4), %sp -+ movel %sp@+,%d0 | d0 -+ addql #4,%sp | orig d0 -+ addl %sp@+,%sp | stk_adj -+ addql #8,%sp | MMUAR & MMUSR -+ rte -+.endm -+ -+#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ -+ -+#define SAVE_SWITCH_STACK save_switch_stack -+#define RESTORE_SWITCH_STACK restore_switch_stack -+#define GET_CURRENT(tmp) get_current tmp -+ -+.macro save_switch_stack -+ subal #(6*4), %sp -+ moveml %a3-%a6/%d6-%d7,%sp@ -+.endm -+ -+.macro restore_switch_stack -+ moveml %sp@,%a3-%a6/%d6-%d7 -+ addal #(6*4), %sp -+.endm -+ -+.macro get_current reg=%d0 -+ movel %sp,\reg -+ andl #-THREAD_SIZE,\reg -+ movel \reg,%curptr -+ movel %curptr@,%curptr -+.endm -+ -+#else /* C source */ -+ -+#define STR(X) STR1(X) -+#define STR1(X) #X -+ -+#define PT_OFF_ORIG_D0 0x24 -+#define PT_OFF_FORMATVEC 0x32 -+#define PT_OFF_SR 0x2C -+#define SAVE_ALL_INT \ -+ "clrl %%sp@-;" /* stk_adj */ \ -+ "pea -1:w;" /* orig d0 = -1 */ \ -+ "movel %%d0,%%sp@-;" /* d0 */ \ -+ "subal #(8*4),%sp" \ -+ "moveml %%d1-%%d5/%%a0-%%a2,%%sp@" -+#define GET_CURRENT(tmp) \ -+ "movel %%sp,"#tmp"\n\t" \ -+ "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ -+ "movel "#tmp",%%a2\n\t" -+ -+#endif -+ -+#endif /* __CF_M68K_ENTRY_H */ ---- /dev/null -+++ b/include/asm-m68k/cfmmu.h -@@ -0,0 +1,104 @@ -+/* -+ * Definitions for Coldfire V4e MMU -+ */ -+#include <asm/movs.h> -+ -+#ifndef __CF_MMU_H__ -+#define __CF_MMU_H__ -+ -+ -+#define MMU_BASE 0xE1000000 -+ -+ -+#define MMUCR (MMU_BASE+0x00) -+#define MMUCR_ASMN 1 -+#define MMUCR_ASM (1<<MMUCR_ASMN) -+#define MMUCR_ENN 0 -+#define MMUCR_EN (1<<MMUCR_ENN) -+ -+#define MMUOR REG16(MMU_BASE+0x04+0x02) -+#define MMUOR_AAN 16 -+#define MMUOR_AA (0xffff<<MMUOR_AAN) -+#define MMUOR_STLBN 8 -+#define MMUOR_STLB (1<<MMUOR_STLBN) -+#define MMUOR_CAN 7 -+#define MMUOR_CA (1<<MMUOR_CAN) -+#define MMUOR_CNLN 6 -+#define MMUOR_CNL (1<<MMUOR_CNLN) -+#define MMUOR_CASN 5 -+#define MMUOR_CAS (1<<MMUOR_CASN) -+#define MMUOR_ITLBN 4 -+#define MMUOR_ITLB (1<<MMUOR_ITLBN) -+#define MMUOR_ADRN 3 -+#define MMUOR_ADR (1<<MMUOR_ADRN) -+#define MMUOR_RWN 2 -+#define MMUOR_RW (1<<MMUOR_RWN) -+#define MMUOR_ACCN 1 -+#define MMUOR_ACC (1<<MMUOR_ACCN) -+#define MMUOR_UAAN 0 -+#define MMUOR_UAA (1<<MMUOR_UAAN) -+ -+#define MMUSR REG32(MMU_BASE+0x08) -+#define MMUSR_SPFN 5 -+#define MMUSR_SPF (1<<MMUSR_SPFN) -+#define MMUSR_RFN 4 -+#define MMUSR_RF (1<<MMUSR_RFN) -+#define MMUSR_WFN 3 -+#define MMUSR_WF (1<<MMUSR_WFN) -+#define MMUSR_HITN 1 -+#define MMUSR_HIT (1<<MMUSR_HITN) -+ -+#define MMUAR REG32(MMU_BASE+0x10) -+#define MMUAR_VPN 1 -+#define MMUAR_VP (0xfffffffe) -+#define MMUAR_SN 0 -+#define MMUAR_S (1<<MMUAR_SN) -+ -+#define MMUTR REG32(MMU_BASE+0x14) -+#define MMUTR_VAN 10 -+#define MMUTR_VA (0xfffffc00) -+#define MMUTR_IDN 2 -+#define MMUTR_ID (0xff<<MMUTR_IDN) -+#define MMUTR_SGN 1 -+#define MMUTR_SG (1<<MMUTR_SGN) -+#define MMUTR_VN 0 -+#define MMUTR_V (1<<MMUTR_VN) -+ -+#define MMUDR REG32(MMU_BASE+0x18) -+#define MMUDR_PAN 10 -+#define MMUDR_PA (0xfffffc00) -+#define MMUDR_SZN 8 -+#define MMUDR_SZ_MASK (0x2<<MMUDR_SZN) -+#define MMUDR_SZ1M (0<<MMUDR_SZN) -+#define MMUDR_SZ4K (1<<MMUDR_SZN) -+#define MMUDR_SZ8K (2<<MMUDR_SZN) -+#define MMUDR_SZ16M (3<<MMUDR_SZN) -+#define MMUDR_CMN 6 -+#define MMUDR_INC (2<<MMUDR_CMN) -+#define MMUDR_IC (0<<MMUDR_CMN) -+#define MMUDR_DWT (0<<MMUDR_CMN) -+#define MMUDR_DCB (1<<MMUDR_CMN) -+#define MMUDR_DNCP (2<<MMUDR_CMN) -+#define MMUDR_DNCIP (3<<MMUDR_CMN) -+#define MMUDR_SPN 5 -+#define MMUDR_SP (1<<MMUDR_SPN) -+#define MMUDR_RN 4 -+#define MMUDR_R (1<<MMUDR_RN) -+#define MMUDR_WN 3 -+#define MMUDR_W (1<<MMUDR_WN) -+#define MMUDR_XN 2 -+#define MMUDR_X (1<<MMUDR_XN) -+#define MMUDR_LKN 1 -+#define MMUDR_LK (1<<MMUDR_LKN) -+ -+ -+#ifndef __ASSEMBLY__ -+#define CF_PMEGS_NUM 256 -+#define CF_INVALID_CONTEXT 255 -+#define CF_PAGE_PGNUM_MASK (PAGE_MASK) -+ -+extern int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, -+ int extension_word); -+#endif /* __ASSEMBLY__*/ -+ -+#endif /* !__CF_MMU_H__ */ ---- /dev/null -+++ b/include/asm-m68k/cf_pgalloc.h -@@ -0,0 +1,103 @@ -+#ifndef M68K_CF_PGALLOC_H -+#define M68K_CF_PGALLOC_H -+ -+#include <asm/coldfire.h> -+#include <asm/page.h> -+#include <asm/cf_tlbflush.h> -+#include <asm/cf_cacheflush.h> -+ -+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -+{ -+ free_page((unsigned long) pte); -+} -+ -+extern const char bad_pmd_string[]; -+ -+extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, -+ unsigned long address) -+{ -+ unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT); -+ -+ if (!page) -+ return NULL; -+ -+ memset((void *)page, 0, PAGE_SIZE); -+ return (pte_t *) (page); -+} -+ -+extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address) -+{ -+ return (pmd_t *) pgd; -+} -+ -+#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) -+#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) -+ -+#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr) -+ -+#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \ -+ (unsigned long)(page_address(page))) -+ -+#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte)) -+ -+#define pmd_pgtable(pmd) pmd_page(pmd) -+ -+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page) -+{ -+ __free_page(page); -+} -+ -+#define __pmd_free_tlb(tlb, pmd) do { } while (0) -+ -+static inline struct page *pte_alloc_one(struct mm_struct *mm, -+ unsigned long address) -+{ -+ struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0); -+ pte_t *pte; -+ -+ if (!page) -+ return NULL; -+ -+ pte = kmap(page); -+ if (pte) { -+ clear_page(pte); -+ __flush_page_to_ram(pte); -+ flush_tlb_kernel_page(pte); -+ nocache_page(pte); -+ } -+ kunmap(pte); -+ -+ return page; -+} -+ -+extern inline void pte_free(struct mm_struct *mm, struct page *page) -+{ -+ __free_page(page); -+} -+ -+/* -+ * In our implementation, each pgd entry contains 1 pmd that is never allocated -+ * or freed. pgd_present is always 1, so this should never be called. -NL -+ */ -+#define pmd_free(mm, pmd) BUG() -+ -+extern inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -+{ -+ free_page((unsigned long) pgd); -+} -+ -+extern inline pgd_t *pgd_alloc(struct mm_struct *mm) -+{ -+ pgd_t *new_pgd; -+ -+ new_pgd = (pgd_t *)__get_free_page(GFP_DMA | __GFP_NOWARN); -+ if (!new_pgd) -+ return NULL; -+ memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE); -+ memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT); -+ return new_pgd; -+} -+ -+#define pgd_populate(mm, pmd, pte) BUG() -+ -+#endif /* M68K_CF_PGALLOC_H */ ---- /dev/null -+++ b/include/asm-m68k/cf_pgtable.h -@@ -0,0 +1,357 @@ -+#ifndef _CF_PGTABLE_H -+#define _CF_PGTABLE_H -+ -+#include <asm/cfmmu.h> -+#include <asm/page.h> -+ -+#ifndef __ASSEMBLY__ -+#include <asm/virtconvert.h> -+#include <linux/linkage.h> -+ -+/* For virtual address to physical address conversion */ -+#define VTOP(addr) __pa(addr) -+#define PTOV(addr) __va(addr) -+ -+ -+#endif /* !__ASSEMBLY__ */ -+ -+/* Page protection values within PTE. */ -+ -+/* MMUDR bits, in proper place. */ -+#define CF_PAGE_LOCKED (0x00000002) -+#define CF_PAGE_EXEC (0x00000004) -+#define CF_PAGE_WRITABLE (0x00000008) -+#define CF_PAGE_READABLE (0x00000010) -+#define CF_PAGE_SYSTEM (0x00000020) -+#define CF_PAGE_COPYBACK (0x00000040) -+#define CF_PAGE_NOCACHE (0x00000080) -+ -+#define CF_CACHEMASK (~0x00000040) -+#define CF_PAGE_MMUDR_MASK (0x000000fe) -+ -+#define _PAGE_NOCACHE030 (CF_PAGE_NOCACHE) -+ -+/* MMUTR bits, need shifting down. */ -+#define CF_PAGE_VALID (0x00000400) -+#define CF_PAGE_SHARED (0x00000800) -+ -+#define CF_PAGE_MMUTR_MASK (0x00000c00) -+#define CF_PAGE_MMUTR_SHIFT (10) -+#define CF_ASID_MMU_SHIFT (2) -+ -+/* Fake bits, not implemented in CF, will get masked out before -+ hitting hardware, and might go away altogether once this port is -+ complete. */ -+#if PAGE_SHIFT < 13 -+#error COLDFIRE Error: Pages must be at least 8k in size -+#endif -+#define CF_PAGE_ACCESSED (0x00001000) -+#define CF_PAGE_FILE (0x00000200) -+#define CF_PAGE_DIRTY (0x00000001) -+ -+#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */ -+#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */ -+#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */ -+#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */ -+#define _DESCTYPE_MASK 0x003 -+#define _CACHEMASK040 (~0x060) -+#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */ -+ -+ -+/* Externally used page protection values. */ -+#define _PAGE_PRESENT (CF_PAGE_VALID) -+#define _PAGE_ACCESSED (CF_PAGE_ACCESSED) -+#define _PAGE_DIRTY (CF_PAGE_DIRTY) -+#define _PAGE_READWRITE (CF_PAGE_WRITABLE \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_SYSTEM \ -+ | CF_PAGE_SHARED) -+ -+/* Compound page protection values. */ -+#define PAGE_NONE __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED) -+ -+#define PAGE_SHARED __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_SHARED) -+ -+#define PAGE_INIT __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_WRITABLE \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_EXEC \ -+ | CF_PAGE_SYSTEM \ -+ | CF_PAGE_SHARED) -+ -+#define PAGE_KERNEL __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_WRITABLE \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_EXEC \ -+ | CF_PAGE_SYSTEM \ -+ | CF_PAGE_SHARED \ -+ | CF_PAGE_ACCESSED) -+ -+#define PAGE_COPY __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_DIRTY) -+/* -+ * Page protections for initialising protection_map. See mm/mmap.c -+ * for use. In general, the bit positions are xwr, and P-items are -+ * private, the S-items are shared. -+ */ -+ -+#define __P000 PAGE_NONE -+#define __P100 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_EXEC) -+#define __P010 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_WRITABLE \ -+ | CF_PAGE_ACCESSED) -+#define __P110 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_WRITABLE \ -+ | CF_PAGE_EXEC) -+#define __P001 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_READABLE) -+#define __P101 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_EXEC) -+#define __P011 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_WRITABLE \ -+ | CF_PAGE_ACCESSED) -+#define __P111 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_WRITABLE \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_EXEC) -+ -+#define __S000 PAGE_NONE -+#define __S100 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_SHARED \ -+ | CF_PAGE_EXEC) -+#define __S010 PAGE_SHARED -+#define __S110 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_SHARED \ -+ | CF_PAGE_EXEC) -+#define __S001 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_SHARED \ -+ | CF_PAGE_READABLE) -+#define __S101 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_SHARED \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_EXEC) -+#define __S011 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_SHARED \ -+ | CF_PAGE_READABLE) -+#define __S111 __pgprot(CF_PAGE_VALID \ -+ | CF_PAGE_ACCESSED \ -+ | CF_PAGE_SHARED \ -+ | CF_PAGE_READABLE \ -+ | CF_PAGE_EXEC) -+ -+#define PTE_MASK PAGE_MASK -+#define CF_PAGE_CHG_MASK (PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY) -+ -+#ifndef __ASSEMBLY__ -+ -+/* -+ * Conversion functions: convert a page and protection to a page entry, -+ * and a page entry and page directory to the page they refer to. -+ */ -+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) -+ -+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -+{ -+ pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot); -+ return pte; -+} -+ -+#define pmd_set(pmdp, ptep) do {} while (0) -+ -+extern inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) -+{ -+ pgd_val(*pgdp) = virt_to_phys(pmdp); -+} -+ -+#define __pte_page(pte) \ -+ ((unsigned long) ((pte_val(pte) & CF_PAGE_PGNUM_MASK) + PAGE_OFFSET)) -+#define __pmd_page(pmd) ((unsigned long) (pmd_val(pmd))) -+ -+extern inline int pte_none(pte_t pte) -+{ -+ return !pte_val(pte); -+} -+extern inline int pte_present(pte_t pte) -+{ -+ return pte_val(pte) & CF_PAGE_VALID; -+} -+extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, -+ pte_t *ptep) -+{ -+ pte_val(*ptep) = 0; -+} -+ -+#define pte_pagenr(pte) ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT) -+#define pte_page(pte) virt_to_page(__pte_page(pte)) -+ -+extern inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); } -+#define pmd_none(pmd) pmd_none2(&(pmd)) -+extern inline int pmd_bad2(pmd_t *pmd) { return 0; } -+#define pmd_bad(pmd) pmd_bad2(&(pmd)) -+#define pmd_present(pmd) (!pmd_none2(&(pmd))) -+extern inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; } -+ -+extern inline int pgd_none(pgd_t pgd) { return 0; } -+extern inline int pgd_bad(pgd_t pgd) { return 0; } -+extern inline int pgd_present(pgd_t pgd) { return 1; } -+extern inline void pgd_clear(pgd_t *pgdp) {} -+ -+ -+#define pte_ERROR(e) \ -+ printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ -+ __FILE__, __LINE__, pte_val(e)) -+#define pmd_ERROR(e) \ -+ printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \ -+ __FILE__, __LINE__, pmd_val(e)) -+#define pgd_ERROR(e) \ -+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ -+ __FILE__, __LINE__, pgd_val(e)) -+ -+ -+/* -+ * The following only work if pte_present() is true. -+ * Undefined behaviour if not... -+ * [we have the full set here even if they don't change from m68k] -+ */ -+extern inline int pte_read(pte_t pte) \ -+ { return pte_val(pte) & CF_PAGE_READABLE; } -+extern inline int pte_write(pte_t pte) \ -+ { return pte_val(pte) & CF_PAGE_WRITABLE; } -+extern inline int pte_exec(pte_t pte) \ -+ { return pte_val(pte) & CF_PAGE_EXEC; } -+extern inline int pte_dirty(pte_t pte) \ -+ { return pte_val(pte) & CF_PAGE_DIRTY; } -+extern inline int pte_young(pte_t pte) \ -+ { return pte_val(pte) & CF_PAGE_ACCESSED; } -+extern inline int pte_file(pte_t pte) \ -+ { return pte_val(pte) & CF_PAGE_FILE; } -+ -+extern inline pte_t pte_wrprotect(pte_t pte) \ -+ { pte_val(pte) &= ~CF_PAGE_WRITABLE; return pte; } -+extern inline pte_t pte_rdprotect(pte_t pte) \ -+ { pte_val(pte) &= ~CF_PAGE_READABLE; return pte; } -+extern inline pte_t pte_exprotect(pte_t pte) \ -+ { pte_val(pte) &= ~CF_PAGE_EXEC; return pte; } -+extern inline pte_t pte_mkclean(pte_t pte) \ -+ { pte_val(pte) &= ~CF_PAGE_DIRTY; return pte; } -+extern inline pte_t pte_mkold(pte_t pte) \ -+ { pte_val(pte) &= ~CF_PAGE_ACCESSED; return pte; } -+extern inline pte_t pte_mkwrite(pte_t pte) \ -+ { pte_val(pte) |= CF_PAGE_WRITABLE; return pte; } -+extern inline pte_t pte_mkread(pte_t pte) \ -+ { pte_val(pte) |= CF_PAGE_READABLE; return pte; } -+extern inline pte_t pte_mkexec(pte_t pte) \ -+ { pte_val(pte) |= CF_PAGE_EXEC; return pte; } -+extern inline pte_t pte_mkdirty(pte_t pte) \ -+ { pte_val(pte) |= CF_PAGE_DIRTY; return pte; } -+extern inline pte_t pte_mkyoung(pte_t pte) \ -+ { pte_val(pte) |= CF_PAGE_ACCESSED; return pte; } -+extern inline pte_t pte_mknocache(pte_t pte) \ -+ { pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40); return pte; } -+extern inline pte_t pte_mkcache(pte_t pte) \ -+ { pte_val(pte) &= ~CF_PAGE_NOCACHE; return pte; } -+ -+#define swapper_pg_dir kernel_pg_dir -+extern pgd_t kernel_pg_dir[PTRS_PER_PGD]; -+ -+/* Find an entry in a pagetable directory. */ -+#define pgd_index(address) ((address) >> PGDIR_SHIFT) -+ -+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) -+ -+/* Find an entry in a kernel pagetable directory. */ -+#define pgd_offset_k(address) pgd_offset(&init_mm, address) -+ -+/* Find an entry in the second-level pagetable. */ -+extern inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address) -+{ -+ return (pmd_t *) pgd; -+} -+ -+/* Find an entry in the third-level pagetable. */ -+#define __pte_offset(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -+#define pte_offset_kernel(dir, address) ((pte_t *) __pmd_page(*(dir)) + \ -+ __pte_offset(address)) -+ -+/* Disable caching for page at given kernel virtual address. */ -+static inline void nocache_page(void *vaddr) -+{ -+ pgd_t *dir; -+ pmd_t *pmdp; -+ pte_t *ptep; -+ unsigned long addr = (unsigned long)vaddr; -+ -+ dir = pgd_offset_k(addr); -+ pmdp = pmd_offset(dir, addr); -+ ptep = pte_offset_kernel(pmdp, addr); -+ *ptep = pte_mknocache(*ptep); -+} -+ -+/* Enable caching for page at given kernel virtual address. */ -+static inline void cache_page(void *vaddr) -+{ -+ pgd_t *dir; -+ pmd_t *pmdp; -+ pte_t *ptep; -+ unsigned long addr = (unsigned long)vaddr; -+ -+ dir = pgd_offset_k(addr); -+ pmdp = pmd_offset(dir, addr); -+ ptep = pte_offset_kernel(pmdp, addr); -+ *ptep = pte_mkcache(*ptep); -+} -+ -+#define PTE_FILE_MAX_BITS 21 -+#define PTE_FILE_SHIFT 11 -+ -+static inline unsigned long pte_to_pgoff(pte_t pte) -+{ -+ return pte_val(pte) >> PTE_FILE_SHIFT; -+} -+ -+static inline pte_t pgoff_to_pte(unsigned pgoff) -+{ -+ pte_t pte = __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE); -+ return pte; -+} -+ -+/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */ -+#define __swp_entry(type, offset) ((swp_entry_t) { (type) | \ -+ (offset << PTE_FILE_SHIFT) }) -+#define __swp_type(x) ((x).val & 0xFF) -+#define __swp_offset(x) ((x).val >> PTE_FILE_SHIFT) -+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -+#define __swp_entry_to_pte(x) (__pte((x).val)) -+ -+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) -+ -+#define pte_offset_map(pmdp, address) ((pte_t *)__pmd_page(*pmdp) + \ -+ __pte_offset(address)) -+#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address) -+#define pte_unmap(pte) kunmap(pte) -+#define pte_unmap_nested(pte) kunmap(pte) -+ -+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -+ -+ -+#endif /* !__ASSEMBLY__ */ -+#endif /* !_CF_PGTABLE_H */ ---- /dev/null -+++ b/include/asm-m68k/cf_tlbflush.h -@@ -0,0 +1,59 @@ -+#ifndef M68K_CF_TLBFLUSH_H -+#define M68K_CF_TLBFLUSH_H -+ -+#include <asm/coldfire.h> -+ -+/* Flush all userspace mappings. */ -+static inline void flush_tlb_all(void) -+{ -+ preempt_disable(); -+ *MMUOR = MMUOR_CNL; -+ preempt_enable(); -+} -+ -+/* Clear user TLB entries within the context named in mm */ -+static inline void flush_tlb_mm(struct mm_struct *mm) -+{ -+ preempt_disable(); -+ *MMUOR = MMUOR_CNL; -+ preempt_enable(); -+} -+ -+/* Flush a single TLB page. */ -+static inline void flush_tlb_page(struct vm_area_struct *vma, -+ unsigned long addr) -+{ -+ preempt_disable(); -+ *MMUOR = MMUOR_CNL; -+ preempt_enable(); -+} -+/* Flush a range of pages from TLB. */ -+ -+static inline void flush_tlb_range(struct mm_struct *mm, -+ unsigned long start, unsigned long end) -+{ -+ preempt_disable(); -+ *MMUOR = MMUOR_CNL; -+ preempt_enable(); -+} -+ -+/* Flush kernel page from TLB. */ -+static inline void flush_tlb_kernel_page(void *addr) -+{ -+ preempt_disable(); -+ *MMUOR = MMUOR_CNL; -+ preempt_enable(); -+} -+ -+static inline void flush_tlb_kernel_range(unsigned long start, -+ unsigned long end) -+{ -+ flush_tlb_all(); -+} -+ -+extern inline void flush_tlb_pgtables(struct mm_struct *mm, -+ unsigned long start, unsigned long end) -+{ -+} -+ -+#endif /* M68K_CF_TLBFLUSH_H */ ---- /dev/null -+++ b/include/asm-m68k/cf_uaccess.h -@@ -0,0 +1,376 @@ -+#ifndef __M68K_CF_UACCESS_H -+#define __M68K_CF_UACCESS_H -+ -+/* -+ * User space memory access functions -+ */ -+ -+/* The "moves" command is not available in the CF instruction set. */ -+#include <linux/compiler.h> -+#include <linux/errno.h> -+#include <linux/types.h> -+#include <linux/sched.h> -+#include <asm/segment.h> -+ -+#define VERIFY_READ 0 -+#define VERIFY_WRITE 1 -+ -+/* We let the MMU do all checking */ -+#define access_ok(type, addr, size) 1 -+ -+/* -+ * The exception table consists of pairs of addresses: the first is the -+ * address of an instruction that is allowed to fault, and the second is -+ * the address at which the program should continue. No registers are -+ * modified, so it is entirely up to the continuation code to figure out -+ * what to do. -+ * -+ * All the routines below use bits of fixup code that are out of line -+ * with the main instruction path. This means when everything is well, -+ * we don't even have to jump over them. Further, they do not intrude -+ * on our cache or tlb entries. -+ */ -+ -+struct exception_table_entry -+{ -+ unsigned long insn, fixup; -+}; -+ -+extern int __put_user_bad(void); -+extern int __get_user_bad(void); -+ -+#define __put_user_asm(res, x, ptr, bwl, reg, err) \ -+asm volatile ("\n" \ -+ "1: move."#bwl" %2,%1\n" \ -+ "2:\n" \ -+ " .section .fixup,\"ax\"\n" \ -+ " .even\n" \ -+ "10: moveq.l %3,%0\n" \ -+ " jra 2b\n" \ -+ " .previous\n" \ -+ "\n" \ -+ " .section __ex_table,\"a\"\n" \ -+ " .align 4\n" \ -+ " .long 1b,10b\n" \ -+ " .long 2b,10b\n" \ -+ " .previous" \ -+ : "+d" (res), "=m" (*(ptr)) \ -+ : #reg (x), "i" (err)) -+ -+/* -+ * These are the main single-value transfer routines. They automatically -+ * use the right size if we just have the right pointer type. -+ */ -+ -+#define __put_user(x, ptr) \ -+({ \ -+ typeof(*(ptr)) __pu_val = (x); \ -+ int __pu_err = 0; \ -+ __chk_user_ptr(ptr); \ -+ switch (sizeof (*(ptr))) { \ -+ case 1: \ -+ __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \ -+ break; \ -+ case 2: \ -+ __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \ -+ break; \ -+ case 4: \ -+ __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ -+ break; \ -+ case 8: \ -+ { \ -+ const void __user *__pu_ptr = (ptr); \ -+ asm volatile ("\n" \ -+ "1: move.l %2,(%1)+\n" \ -+ "2: move.l %R2,(%1)\n" \ -+ "3:\n" \ -+ " .section .fixup,\"ax\"\n" \ -+ " .even\n" \ -+ "10: movel %3,%0\n" \ -+ " jra 3b\n" \ -+ " .previous\n" \ -+ "\n" \ -+ " .section __ex_table,\"a\"\n" \ -+ " .align 4\n" \ -+ " .long 1b,10b\n" \ -+ " .long 2b,10b\n" \ -+ " .long 3b,10b\n" \ -+ " .previous" \ -+ : "+d" (__pu_err), "+a" (__pu_ptr) \ -+ : "r" (__pu_val), "i" (-EFAULT) \ -+ : "memory"); \ -+ break; \ -+ } \ -+ default: \ -+ __pu_err = __put_user_bad(); \ -+ break; \ -+ } \ -+ __pu_err; \ -+}) -+#define put_user(x, ptr) __put_user(x, ptr) -+ -+ -+#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \ -+ type __gu_val; \ -+ asm volatile ("\n" \ -+ "1: move."#bwl" %2,%1\n" \ -+ "2:\n" \ -+ " .section .fixup,\"ax\"\n" \ -+ " .even\n" \ -+ "10: move.l %3,%0\n" \ -+ " subl %1,%1\n" \ -+ " jra 2b\n" \ -+ " .previous\n" \ -+ "\n" \ -+ " .section __ex_table,\"a\"\n" \ -+ " .align 4\n" \ -+ " .long 1b,10b\n" \ -+ " .previous" \ -+ : "+d" (res), "=&" #reg (__gu_val) \ -+ : "m" (*(ptr)), "i" (err)); \ -+ (x) = (typeof(*(ptr)))(unsigned long)__gu_val; \ -+}) -+ -+#define __get_user(x, ptr) \ -+({ \ -+ int __gu_err = 0; \ -+ __chk_user_ptr(ptr); \ -+ switch (sizeof(*(ptr))) { \ -+ case 1: \ -+ __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \ -+ break; \ -+ case 2: \ -+ __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT); \ -+ break; \ -+ case 4: \ -+ __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ -+ break; \ -+/* case 8: disabled because gcc-4.1 has a broken typeof \ -+ { \ -+ const void *__gu_ptr = (ptr); \ -+ u64 __gu_val; \ -+ asm volatile ("\n" \ -+ "1: move.l (%2)+,%1\n" \ -+ "2: move.l (%2),%R1\n" \ -+ "3:\n" \ -+ " .section .fixup,\"ax\"\n" \ -+ " .even\n" \ -+ "10: move.l %3,%0\n" \ -+ " subl %1,%1\n" \ -+ " subl %R1,%R1\n" \ -+ " jra 3b\n" \ -+ " .previous\n" \ -+ "\n" \ -+ " .section __ex_table,\"a\"\n" \ -+ " .align 4\n" \ -+ " .long 1b,10b\n" \ -+ " .long 2b,10b\n" \ -+ " .previous" \ -+ : "+d" (__gu_err), "=&r" (__gu_val), \ -+ "+a" (__gu_ptr) \ -+ : "i" (-EFAULT) \ -+ : "memory"); \ -+ (x) = (typeof(*(ptr)))__gu_val; \ -+ break; \ -+ } */ \ -+ default: \ -+ __gu_err = __get_user_bad(); \ -+ break; \ -+ } \ -+ __gu_err; \ -+}) -+#define get_user(x, ptr) __get_user(x, ptr) -+ -+unsigned long __generic_copy_from_user(void *to, const void __user *from, -+ unsigned long n); -+unsigned long __generic_copy_to_user(void __user *to, const void *from, -+ unsigned long n); -+ -+#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\ -+ asm volatile ("\n" \ -+ "1: move."#s1" (%2)+,%3\n" \ -+ " move."#s1" %3,(%1)+\n" \ -+ "2: move."#s2" (%2)+,%3\n" \ -+ " move."#s2" %3,(%1)+\n" \ -+ " .ifnc \""#s3"\",\"\"\n" \ -+ "3: move."#s3" (%2)+,%3\n" \ -+ " move."#s3" %3,(%1)+\n" \ -+ " .endif\n" \ -+ "4:\n" \ -+ " .section __ex_table,\"a\"\n" \ -+ " .align 4\n" \ -+ " .long 1b,10f\n" \ -+ " .long 2b,20f\n" \ -+ " .ifnc \""#s3"\",\"\"\n" \ -+ " .long 3b,30f\n" \ -+ " .endif\n" \ -+ " .previous\n" \ -+ "\n" \ -+ " .section .fixup,\"ax\"\n" \ -+ " .even\n" \ -+ "10: clr."#s1" (%1)+\n" \ -+ "20: clr."#s2" (%1)+\n" \ -+ " .ifnc \""#s3"\",\"\"\n" \ -+ "30: clr."#s3" (%1)+\n" \ -+ " .endif\n" \ -+ " moveq.l #"#n",%0\n" \ -+ " jra 4b\n" \ -+ " .previous\n" \ -+ : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \ -+ : : "memory") -+ -+static __always_inline unsigned long -+__constant_copy_from_user(void *to, const void __user *from, unsigned long n) -+{ -+ unsigned long res = 0, tmp; -+ -+ switch (n) { -+ case 1: -+ __get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1); -+ break; -+ case 2: -+ __get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, -+ d, 2); -+ break; -+ case 3: -+ __constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,); -+ break; -+ case 4: -+ __get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, -+ r, 4); -+ break; -+ case 5: -+ __constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,); -+ break; -+ case 6: -+ __constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,); -+ break; -+ case 7: -+ __constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b); -+ break; -+ case 8: -+ __constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,); -+ break; -+ case 9: -+ __constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b); -+ break; -+ case 10: -+ __constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w); -+ break; -+ case 12: -+ __constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l); -+ break; -+ default: -+ /* we limit the inlined version to 3 moves */ -+ return __generic_copy_from_user(to, from, n); -+ } -+ -+ return res; -+} -+ -+#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \ -+ asm volatile ("\n" \ -+ " move."#s1" (%2)+,%3\n" \ -+ "11: move."#s1" %3,(%1)+\n" \ -+ "12: move."#s2" (%2)+,%3\n" \ -+ "21: move."#s2" %3,(%1)+\n" \ -+ "22:\n" \ -+ " .ifnc \""#s3"\",\"\"\n" \ -+ " move."#s3" (%2)+,%3\n" \ -+ "31: move."#s3" %3,(%1)+\n" \ -+ "32:\n" \ -+ " .endif\n" \ -+ "4:\n" \ -+ "\n" \ -+ " .section __ex_table,\"a\"\n" \ -+ " .align 4\n" \ -+ " .long 11b,5f\n" \ -+ " .long 12b,5f\n" \ -+ " .long 21b,5f\n" \ -+ " .long 22b,5f\n" \ -+ " .ifnc \""#s3"\",\"\"\n" \ -+ " .long 31b,5f\n" \ -+ " .long 32b,5f\n" \ -+ " .endif\n" \ -+ " .previous\n" \ -+ "\n" \ -+ " .section .fixup,\"ax\"\n" \ -+ " .even\n" \ -+ "5: moveq.l #"#n",%0\n" \ -+ " jra 4b\n" \ -+ " .previous\n" \ -+ : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \ -+ : : "memory") -+ -+static __always_inline unsigned long -+__constant_copy_to_user(void __user *to, const void *from, unsigned long n) -+{ -+ unsigned long res = 0, tmp; -+ -+ switch (n) { -+ case 1: -+ __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1); -+ break; -+ case 2: -+ __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2); -+ break; -+ case 3: -+ __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,); -+ break; -+ case 4: -+ __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4); -+ break; -+ case 5: -+ __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,); -+ break; -+ case 6: -+ __constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,); -+ break; -+ case 7: -+ __constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b); -+ break; -+ case 8: -+ __constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,); -+ break; -+ case 9: -+ __constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b); -+ break; -+ case 10: -+ __constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w); -+ break; -+ case 12: -+ __constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l); -+ break; -+ default: -+ /* limit the inlined version to 3 moves */ -+ return __generic_copy_to_user(to, from, n); -+ } -+ -+ return res; -+} -+ -+#define __copy_from_user(to, from, n) \ -+(__builtin_constant_p(n) ? \ -+ __constant_copy_from_user(to, from, n) : \ -+ __generic_copy_from_user(to, from, n)) -+ -+#define __copy_to_user(to, from, n) \ -+(__builtin_constant_p(n) ? \ -+ __constant_copy_to_user(to, from, n) : \ -+ __generic_copy_to_user(to, from, n)) -+ -+#define __copy_to_user_inatomic __copy_to_user -+#define __copy_from_user_inatomic __copy_from_user -+ -+#define copy_from_user(to, from, n) __copy_from_user(to, from, n) -+#define copy_to_user(to, from, n) __copy_to_user(to, from, n) -+ -+long strncpy_from_user(char *dst, const char __user *src, long count); -+long strnlen_user(const char __user *src, long n); -+unsigned long __clear_user(void __user *to, unsigned long n); -+ -+#define clear_user __clear_user -+ -+#define strlen_user(str) strnlen_user(str, 32767) -+ -+#endif /* _M68K_CF_UACCESS_H */ ---- a/include/asm-m68k/checksum.h -+++ b/include/asm-m68k/checksum.h -@@ -34,6 +34,7 @@ extern __wsum csum_partial_copy_nocheck( - void *dst, int len, - __wsum sum); - -+#ifndef CONFIG_COLDFIRE /* CF has own copy in arch/m68k/lib/checksum.c */ - /* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. -@@ -59,6 +60,9 @@ static inline __sum16 ip_fast_csum(const - : "memory"); - return (__force __sum16)~sum; - } -+#else -+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); -+#endif - - /* - * Fold a partial checksum -@@ -67,6 +71,11 @@ static inline __sum16 ip_fast_csum(const - static inline __sum16 csum_fold(__wsum sum) - { - unsigned int tmp = (__force u32)sum; -+#ifdef CONFIG_COLDFIRE -+ tmp = (tmp & 0xffff) + (tmp >> 16); -+ tmp = (tmp & 0xffff) + (tmp >> 16); -+ return (__force __sum16) ~tmp; -+#else - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" -@@ -74,6 +83,7 @@ static inline __sum16 csum_fold(__wsum s - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (tmp)); - return (__force __sum16)~sum; -+#endif - } - - ---- /dev/null -+++ b/include/asm-m68k/coldfire_edma.h -@@ -0,0 +1,125 @@ -+/* -+ * coldfire_edma.h - eDMA driver for Coldfire MCF5445x -+ * -+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef _LINUX_COLDFIRE_DMA_H -+#define _LINUX_COLDFIRE_DMA_H -+ -+#include <linux/interrupt.h> -+#include <asm/mcf5445x_edma.h> -+ -+#define EDMA_DRIVER_NAME "ColdFire-eDMA" -+#define DMA_DEV_MINOR 1 -+ -+#ifdef CONFIG_M5445X -+#define EDMA_INT_CHANNEL_BASE 8 -+#define EDMA_INT_CONTROLLER_BASE 64 -+#define EDMA_INT_BASE (EDMA_INT_CHANNEL_BASE + \ -+ EDMA_INT_CONTROLLER_BASE) -+#define EDMA_CHANNELS 16 -+#define EDMA_INT_ERR 16 /* edma error interrupt */ -+#endif /* CONFIG_M5445X */ -+ -+typedef irqreturn_t (*edma_irq_handler)(int, void *); -+typedef void (*edma_error_handler)(int, void *); -+ -+/* Setup transfer control descriptor (TCD) -+ * channel - descriptor number -+ * source - source address -+ * dest - destination address -+ * attr - attributes -+ * soff - source offset -+ * nbytes - number of bytes to be transfered in minor loop -+ * slast - last source address adjustment -+ * citer - major loop count -+ * biter - begining minor loop count -+ * doff - destination offset -+ * dlast_sga - last destination address adjustment -+ * major_int - generate interrupt after each major loop -+ * disable_req - disable DMA request after major loop -+ */ -+void set_edma_params(int channel, u32 source, u32 dest, -+ u32 attr, u32 soff, u32 nbytes, u32 slast, -+ u32 citer, u32 biter, u32 doff, u32 dlast_sga, -+ int major_int, int disable_req); -+ -+/* Starts eDMA transfer on specified channel -+ * channel - eDMA TCD number -+ */ -+static inline void start_edma_transfer(int channel) -+{ -+ MCF_EDMA_SERQ = channel; -+ MCF_EDMA_SSRT = channel; -+} -+ -+/* Stops eDMA transfer -+ * channel - eDMA TCD number -+ */ -+static inline void stop_edma_transfer(int channel) -+{ -+ MCF_EDMA_CINT = channel; -+ MCF_EDMA_CERQ = channel; -+} -+ -+ -+/* Confirm that interrupt has been handled -+ * channel - eDMA TCD number -+ */ -+static inline void confirm_edma_interrupt_handled(int channel) -+{ -+ MCF_EDMA_CINT = channel; -+} -+ -+/* Initialize eDMA controller */ -+void init_edma(void); -+ -+/* Request eDMA channel: -+ * channel - eDMA TCD number -+ * handler - channel IRQ callback -+ * error_handler - error interrupt handler callback for channel -+ * dev - device -+ * lock - spinlock to be locked (can be NULL) -+ * device_id - device driver name for proc file system output -+ */ -+int request_edma_channel(int channel, -+ edma_irq_handler handler, -+ edma_error_handler error_handler, -+ void *dev, -+ spinlock_t *lock, -+ const char *device_id); -+ -+/** -+ * set_edma_callback - Update the channel callback/arg -+ * @channel: channel number -+ * @handler: dma handler -+ * @error_handler: dma error handler -+ * @arg: argument to pass back -+ * -+ * Returns 0 if success or a negative value if failure -+ */ -+int set_edma_callback(int channel, -+ edma_irq_handler handler, -+ edma_error_handler error_handler, -+ void *arg); -+ -+/* Free eDMA channel -+ * channel - eDMA TCD number -+ * dev - device -+ */ -+int free_edma_channel(int channel, void *dev); -+ -+/* -+ * DMA Modes -+ */ -+#define DMA_MODE_READ 0 -+#define DMA_MODE_WRITE 1 -+#endif ---- /dev/null -+++ b/include/asm-m68k/coldfire.h -@@ -0,0 +1,51 @@ -+#ifndef _COLDFIRE_H_ -+#define _COLDFIRE_H_ -+ -+#if defined(CONFIG_M5445X) -+#define MCF_MBAR 0x0 -+/* -+ * Even though RAMBAR1 should be in the 0x8xxxxxxx range there -+ * is a problem that needs to be resolved. Currently head.S -+ * disables SRAM/RAMBAR1. -+ */ -+#define MCF_RAMBAR1 0x40000000 -+#define MCF_SRAM 0x40000000 -+#elif defined(CONFIG_M547X_8X) -+#define MCF_MBAR 0xF0000000 -+#define MCF_MMUBAR 0xF1000000 -+#define MCF_RAMBAR0 0xF3000000 -+#define MCF_RAMBAR1 0xF3001000 -+#endif -+ -+#define MCF_CLK CONFIG_MCFCLK -+#define MCF_BUSCLK (CONFIG_MCFCLK/2) -+ -+#ifdef __ASSEMBLY__ -+#define REG32 -+#define REG16 -+#define REG08 -+#else /* __ASSEMBLY__ */ -+#define REG32(x) ((volatile unsigned long *)(x)) -+#define REG16(x) ((volatile unsigned short *)(x)) -+#define REG08(x) ((volatile unsigned char *)(x)) -+ -+#define MCF_REG32(x) *(volatile unsigned long *)(MCF_MBAR+(x)) -+#define MCF_REG16(x) *(volatile unsigned short *)(MCF_MBAR+(x)) -+#define MCF_REG08(x) *(volatile unsigned char *)(MCF_MBAR+(x)) -+ -+void cacr_set(unsigned long); -+unsigned long cacr_get(void); -+ -+#define coldfire_enable_irq0(irq) MCF_INTC0_CIMR = (irq); -+ -+#define coldfire_enable_irq1(irq) MCF_INTC1_CIMR = (irq); -+ -+#define coldfire_disable_irq0(irq) MCF_INTC0_SIMR = (irq); -+ -+#define coldfire_disable_irq1(irq) MCF_INTC1_SIMR = (irq); -+ -+#define getiprh() MCF_INTC0_IPRH -+ -+#endif /* __ASSEMBLY__ */ -+ -+#endif /* _COLDFIRE_H_ */ ---- a/include/asm-m68k/delay.h -+++ b/include/asm-m68k/delay.h -@@ -11,8 +11,25 @@ - - static inline void __delay(unsigned long loops) - { -+#if defined(CONFIG_COLDFIRE) -+ /* The coldfire runs this loop at significantly different speeds -+ * depending upon long word alignment or not. We'll pad it to -+ * long word alignment which is the faster version. -+ * The 0x4a8e is of course a 'tstl %fp' instruction. This is better -+ * than using a NOP (0x4e71) instruction because it executes in one -+ * cycle not three and doesn't allow for an arbitary delay waiting -+ * for bus cycles to finish. Also fp/a6 isn't likely to cause a -+ * stall waiting for the register to become valid if such is added -+ * to the coldfire at some stage. -+ */ -+ __asm__ __volatile__ (".balignw 4, 0x4a8e\n\t" -+ "1: subql #1, %0\n\t" -+ "jcc 1b" -+ : "=d" (loops) : "0" (loops)); -+#else - __asm__ __volatile__ ("1: subql #1,%0; jcc 1b" - : "=d" (loops) : "0" (loops)); -+#endif - } - - extern void __bad_udelay(void); -@@ -26,12 +43,17 @@ extern void __bad_udelay(void); - */ - static inline void __const_udelay(unsigned long xloops) - { -+#if defined(CONFIG_COLDFIRE) -+ -+ __delay(((((unsigned long long) xloops * loops_per_jiffy))>>32)*HZ); -+#else - unsigned long tmp; - - __asm__ ("mulul %2,%0:%1" - : "=d" (xloops), "=d" (tmp) - : "d" (xloops), "1" (loops_per_jiffy)); - __delay(xloops * HZ); -+#endif - } - - static inline void __udelay(unsigned long usecs) -@@ -46,12 +68,16 @@ static inline void __udelay(unsigned lon - static inline unsigned long muldiv(unsigned long a, unsigned long b, - unsigned long c) - { -+#if defined(CONFIG_COLDFIRE) -+ return (long)(((unsigned long long)a * b)/c); -+#else - unsigned long tmp; - - __asm__ ("mulul %2,%0:%1; divul %3,%0:%1" - : "=d" (tmp), "=d" (a) - : "d" (b), "d" (c), "1" (a)); - return a; -+#endif - } - - #endif /* defined(_M68K_DELAY_H) */ ---- a/include/asm-m68k/div64.h -+++ b/include/asm-m68k/div64.h -@@ -5,6 +5,7 @@ - - /* n = n / base; return rem; */ - -+#ifndef CONFIG_COLDFIRE - #define do_div(n, base) ({ \ - union { \ - unsigned long n32[2]; \ -@@ -24,6 +25,9 @@ - (n) = __n.n64; \ - __rem; \ - }) -+#else -+# include <asm-generic/div64.h> -+#endif - - extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); - #endif /* _M68K_DIV64_H */ ---- a/include/asm-m68k/dma.h -+++ b/include/asm-m68k/dma.h -@@ -1,16 +1,120 @@ - #ifndef _M68K_DMA_H - #define _M68K_DMA_H 1 - -- - /* it's useless on the m68k, but unfortunately needed by the new - bootmem allocator (but this should do it for this) */ - #define MAX_DMA_ADDRESS PAGE_OFFSET - -+#ifndef CONFIG_COLDFIRE - #define MAX_DMA_CHANNELS 8 - - extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ - extern void free_dma(unsigned int dmanr); /* release it again */ - -+#else /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484) || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */ -+ -+/************************************************ -+ * Multichannel DMA definitions * -+ ************************************************/ -+#ifdef CONFIG_MCD_DMA -+#include <asm/MCD_dma.h> -+#include <asm/m5485dma.h> -+ -+struct scatterlist; -+ -+#define MAX_DMA_CHANNELS NCHANNELS -+/* -+ * identifiers for each initiator/requestor -+ */ -+#define DMA_ALWAYS (0) -+#define DMA_DSPI_RX (1) -+#define DMA_DSPI_TX (2) -+#define DMA_DREQ0 (3) -+#define DMA_PSC0_RX (4) -+#define DMA_PSC0_TX (5) -+#define DMA_USBEP0 (6) -+#define DMA_USBEP1 (7) -+#define DMA_USBEP2 (8) -+#define DMA_USBEP3 (9) -+#define DMA_PCI_TX (10) -+#define DMA_PCI_RX (11) -+#define DMA_PSC1_RX (12) -+#define DMA_PSC1_TX (13) -+#define DMA_I2C_RX (14) -+#define DMA_I2C_TX (15) -+#define DMA_FEC0_RX (16) -+#define DMA_FEC0_TX (17) -+#define DMA_FEC1_RX (18) -+#define DMA_FEC1_TX (19) -+#define DMA_DREQ1 (20) -+#define DMA_CTM0 (21) -+#define DMA_CTM1 (22) -+#define DMA_CTM2 (23) -+#define DMA_CTM3 (24) -+#define DMA_CTM4 (25) -+#define DMA_CTM5 (26) -+#define DMA_CTM6 (27) -+#define DMA_CTM7 (28) -+#define DMA_USBEP4 (29) -+#define DMA_USBEP5 (30) -+#define DMA_USBEP6 (31) -+#define DMA_PSC2_RX (32) -+#define DMA_PSC2_TX (33) -+#define DMA_PSC3_RX (34) -+#define DMA_PSC3_TX (35) -+#define DMA_FEC_RX(x) ((x == 0) ? DMA_FEC0_RX : DMA_FEC1_RX) -+#define DMA_FEC_TX(x) ((x == 0) ? DMA_FEC0_TX : DMA_FEC1_TX) -+ -+int dma_set_initiator(int); -+unsigned int dma_get_initiator(int); -+void dma_remove_initiator(int); -+int dma_set_channel(int); -+int dma_get_channel(int); -+void dma_remove_channel(int); -+int dma_set_channel_fec(int requestor); -+int dma_connect(int channel, int address); -+int dma_disconnect(int channel); -+void dma_remove_channel_by_number(int channel); -+int dma_init(void); -+ -+#endif /* CONFIG_MCD_DMA */ -+ -+extern spinlock_t dma_spin_lock; -+ -+static __inline__ unsigned long claim_dma_lock(void) -+{ -+ unsigned long flags; -+ spin_lock_irqsave(&dma_spin_lock, flags); -+ return flags; -+} -+ -+static __inline__ void release_dma_lock(unsigned long flags) -+{ -+ spin_unlock_irqrestore(&dma_spin_lock, flags); -+} -+ -+ -+/* -+ * Linux standard DMA stuff -+ */ -+#if 0 -+int request_dma(unsigned int channel, const char * device_id); -+void free_dma(unsigned int channel); -+void enable_dma(unsigned int channel); -+void disable_dma(unsigned int channel); -+int dma_channel_active(unsigned int channel); -+void set_dma_sg(unsigned int channel, struct scatterlist *sg, int nr_sg); -+void set_dma_page(unsigned int channel, char pagenr); -+void set_dma_addr(unsigned int channel, unsigned long physaddr); -+void set_dma_count(unsigned int channel, unsigned long count); -+void set_dma_mode(unsigned int channel, unsigned int mode); -+void set_dma_speed(unsigned int channel, int cycle_ns); -+int get_dma_residue(unsigned int channel); -+#endif -+#define clear_dma_ff(channel) -+ -+#endif /* not (defined(CONFIG_MCF5474) || defined(CONFIG_MCF5484) || defined(CONFIG_MCF5475) || defined(CONFIG_MCF5485)) */ -+ - #ifdef CONFIG_PCI - extern int isa_dma_bridge_buggy; - #else ---- a/include/asm-m68k/elf.h -+++ b/include/asm-m68k/elf.h -@@ -34,6 +34,26 @@ - #define R_68K_GLOB_DAT 20 - #define R_68K_JMP_SLOT 21 - #define R_68K_RELATIVE 22 -+/* TLS static relocations */ -+#define R_68K_TLS_GD32 25 -+#define R_68K_TLS_GD16 26 -+#define R_68K_TLS_GD8 27 -+#define R_68K_TLS_LDM32 28 -+#define R_68K_TLS_LDM16 29 -+#define R_68K_TLS_LDM8 30 -+#define R_68K_TLS_LDO32 31 -+#define R_68K_TLS_LDO16 32 -+#define R_68K_TLS_LDO8 33 -+#define R_68K_TLS_IE32 34 -+#define R_68K_TLS_IE16 35 -+#define R_68K_TLS_IE8 36 -+#define R_68K_TLS_LE32 37 -+#define R_68K_TLS_LE16 38 -+#define R_68K_TLS_LE8 39 -+/* TLS dynamic relocations */ -+#define R_68K_TLS_DTPMOD32 40 -+#define R_68K_TLS_DTPREL32 41 -+#define R_68K_TLS_TPREL32 42 - - typedef unsigned long elf_greg_t; - -@@ -60,7 +80,7 @@ typedef struct user_m68kfp_struct elf_fp - #define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 - - #define USE_ELF_CORE_DUMP --#ifndef CONFIG_SUN3 -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) - #define ELF_EXEC_PAGESIZE 4096 - #else - #define ELF_EXEC_PAGESIZE 8192 -@@ -116,4 +136,35 @@ typedef struct user_m68kfp_struct elf_fp - - #define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) - -+/* -+ * VDSO -+ */ -+#ifdef CONFIG_VSYSCALL -+extern unsigned int vdso_enabled; -+ -+#define VDSO_BASE ((unsigned long)current->mm->context.vdso) -+#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) -+ -+#define VSYSCALL_AUX_ENT \ -+ if (vdso_enabled) \ -+ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); -+ -+/* additional pages */ -+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 -+ -+struct linux_binprm; -+extern int arch_setup_additional_pages(struct linux_binprm *bprm, -+ int executable_stack); -+ -+#else -+/* no VSYSCALL_AUX_ENT */ -+#define VSYSCALL_AUX_ENT -+#endif -+ -+#define ARCH_DLINFO \ -+do { \ -+ /* vsyscall entry */ \ -+ VSYSCALL_AUX_ENT; \ -+} while (0); -+ - #endif ---- a/include/asm-m68k/fpu.h -+++ b/include/asm-m68k/fpu.h -@@ -12,6 +12,8 @@ - #define FPSTATESIZE (96/sizeof(unsigned char)) - #elif defined(CONFIG_M68KFPU_EMU) - #define FPSTATESIZE (28/sizeof(unsigned char)) -+#elif defined(CONFIG_CFV4E) -+#define FPSTATESIZE (16/sizeof(unsigned char)) - #elif defined(CONFIG_M68060) - #define FPSTATESIZE (12/sizeof(unsigned char)) - #else ---- a/include/asm-m68k/io.h -+++ b/include/asm-m68k/io.h -@@ -204,6 +204,12 @@ static inline u16 __iomem *isa_mtw(unsig - #define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val))) - #define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val))) - -+#ifndef CONFIG_COLDFIRE -+#define isa_readb(p) in_8(isa_mtb(p)) -+#define isa_readw(p) (ISA_SEX ? in_be16(isa_mtw(p)) : in_le16(isa_mtw(p))) -+#define isa_writeb(val,p) out_8(isa_mtb(p),(val)) -+#define isa_writew(val,p) (ISA_SEX ? out_be16(isa_mtw(p),(val)) : out_le16(isa_mtw(p),(val))) -+#else - #define isa_readb(p) in_8(isa_mtb((unsigned long)(p))) - #define isa_readw(p) \ - (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \ -@@ -212,7 +218,7 @@ static inline u16 __iomem *isa_mtw(unsig - #define isa_writew(val,p) \ - (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \ - : out_le16(isa_mtw((unsigned long)(p)),(val))) -- -+#endif - static inline void isa_delay(void) - { - switch(ISA_TYPE) -@@ -285,6 +291,29 @@ static inline void isa_delay(void) - #endif /* CONFIG_ISA */ - - #if defined(CONFIG_PCI) -+#ifdef CONFIG_COLDFIRE -+#define inb_p inb -+#define inw_p inw -+#define inl_p inl -+#define outb_p outb -+#define outw_p outw -+#define outl_p outl -+ -+unsigned char pci_inb(long addr); -+unsigned short pci_inw(long addr); -+unsigned long pci_inl(long addr); -+void pci_outb(unsigned char val, long addr); -+void pci_outw(unsigned short val, long addr); -+void pci_outl(unsigned long val, long addr); -+ -+void pci_insb(volatile unsigned char* addr, unsigned char* buf, int len); -+void pci_insw(volatile unsigned short* addr, unsigned short* buf, int len); -+void pci_insl(volatile unsigned long* addr, unsigned long* buf, int len); -+ -+void pci_outsb(volatile unsigned char* addr, const unsigned char* buf, int len); -+void pci_outsw(volatile unsigned short* addr, const unsigned short* buf, int len); -+void pci_outsl(volatile unsigned long* addr, const unsigned long* buf, int len); -+#endif - - #define readl(addr) in_le32(addr) - #define writel(val,addr) out_le32((addr),(val)) -@@ -300,12 +329,48 @@ static inline void isa_delay(void) - #define readl_relaxed(addr) readl(addr) - - #ifndef CONFIG_ISA -+#ifndef CONFIG_COLDFIRE - #define inb(port) in_8(port) - #define outb(val,port) out_8((port),(val)) - #define inw(port) in_le16(port) - #define outw(val,port) out_le16((port),(val)) - #define inl(port) in_le32(port) - #define outl(val,port) out_le32((port),(val)) -+#define insb(port, buf, nr) \ -+ raw_insb((u8 *)(port), (u8 *)(buf), (nr)) -+#define outsb(port, buf, nr) \ -+ raw_outsb((u8 *)(port), (u8 *)(buf), (nr)) -+#define insw(port, buf, nr) \ -+ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)) -+#define outsw(port, buf, nr) \ -+ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)) -+#define insl(port, buf, nr) \ -+ raw_insw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1) -+#define outsl(port, buf, nr) \ -+ raw_outsw_swapw((u16 *)(port), (u16 *)(buf), (nr)<<1) -+#else -+#define inb(port) pci_inb(port) -+#define outb(val,port) pci_outb((val),(port)) -+#define inw(port) pci_inw(port) -+#define outw(val,port) pci_outw((val),(port)) -+#define insb(a,b,c) pci_insb((volatile unsigned char*)a,(unsigned char*)b,c) -+#define insw(a,b,c) pci_insw((volatile unsigned short*)a,(const unsigned short*)b,c) -+#define insl(a,b,c) pci_insl((volatile unsigned long*)a,(const unsigned long*)b,c) -+#define outsb(a,b,c) pci_outsb((volatile unsigned char*)a,(const unsigned char*)b,c) -+#define outsw(a,b,c) pci_outsw((volatile unsigned short*)a,(const unsigned short*)b,c) -+#define outsl(a,b,c) pci_outsl((volatile unsigned long*)a,(const unsigned long*)b,c) -+#define inl(port) pci_inl(port) -+#define outl(val,port) pci_outl((val),(port)) -+#endif -+ -+#ifndef CONFIG_COLDFIRE -+#define __raw_readb readb -+#define __raw_readw readw -+#define __raw_readl readl -+#define __raw_writeb writeb -+#define __raw_writew writew -+#define __raw_writel writel -+#endif - - #else - /* -@@ -397,10 +462,12 @@ static inline void memcpy_toio(volatile - __builtin_memcpy((void __force *) dst, src, count); - } - --#ifndef CONFIG_SUN3 --#define IO_SPACE_LIMIT 0xffff --#else -+#if defined(CONFIG_SUN3) - #define IO_SPACE_LIMIT 0x0fffffff -+#elif defined(CONFIG_COLDFIRE) -+#define IO_SPACE_LIMIT 0xffffffff -+#else -+#define IO_SPACE_LIMIT 0xffff - #endif - - #endif /* __KERNEL__ */ -@@ -418,4 +485,31 @@ static inline void memcpy_toio(volatile - */ - #define xlate_dev_kmem_ptr(p) p - -+#ifdef CONFIG_COLDFIRE -+#define __raw_readb(addr) \ -+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) -+#define __raw_readw(addr) \ -+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) -+#define __raw_readl(addr) \ -+ ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; }) -+#define __raw_writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -+#define __raw_writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -+#define __raw_writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) -+ -+#define memset_io(a, b, c) memset((void *)(a), (b), (c)) -+#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) -+#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) -+#if !defined(readb) -+#define readb(addr) \ -+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) -+#define readw(addr) \ -+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) -+#define readl(addr) \ -+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) -+#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -+#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -+#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b)) -+#endif /* readb */ -+#endif /* CONFIG_COLDFIRE */ -+ - #endif /* _IO_H */ ---- a/include/asm-m68k/irq.h -+++ b/include/asm-m68k/irq.h -@@ -11,7 +11,10 @@ - * Currently the Atari has 72 and the Amiga 24, but if both are - * supported in the kernel it is better to make room for 72. - */ --#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) -+#if defined(CONFIG_COLDFIRE) -+#define SYS_IRQS 256 -+#define NR_IRQS SYS_IRQS -+#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) - #define NR_IRQS 200 - #elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) - #define NR_IRQS 72 ---- /dev/null -+++ b/include/asm-m68k/m5485dma.h -@@ -0,0 +1,97 @@ -+/* -+ * m5485dma.h -- ColdFire 547x/548x DMA controller support. -+ */ -+#ifndef __MCF548X_DMA_H__ -+#define __MCF548X_DMA_H__ -+ -+ -+/* Register read/write macros */ -+#define MCF_DMA_DIPR (*(volatile u32*)(void*)(MCF_MBAR+0x008014)) -+#define MCF_DMA_DIMR (*(volatile u32*)(void*)(MCF_MBAR+0x008018)) -+#define MCF_DMA_IMCR (*(volatile u32*)(void*)(MCF_MBAR+0x00805C)) -+ -+/* Bit definitions and macros for MCF_DMA_DIPR */ -+#define MCF_DMA_DIPR_TASK0 (0x00000001) -+#define MCF_DMA_DIPR_TASK1 (0x00000002) -+#define MCF_DMA_DIPR_TASK2 (0x00000004) -+#define MCF_DMA_DIPR_TASK3 (0x00000008) -+#define MCF_DMA_DIPR_TASK4 (0x00000010) -+#define MCF_DMA_DIPR_TASK5 (0x00000020) -+#define MCF_DMA_DIPR_TASK6 (0x00000040) -+#define MCF_DMA_DIPR_TASK7 (0x00000080) -+#define MCF_DMA_DIPR_TASK8 (0x00000100) -+#define MCF_DMA_DIPR_TASK9 (0x00000200) -+#define MCF_DMA_DIPR_TASK10 (0x00000400) -+#define MCF_DMA_DIPR_TASK11 (0x00000800) -+#define MCF_DMA_DIPR_TASK12 (0x00001000) -+#define MCF_DMA_DIPR_TASK13 (0x00002000) -+#define MCF_DMA_DIPR_TASK14 (0x00004000) -+#define MCF_DMA_DIPR_TASK15 (0x00008000) -+ -+/* Bit definitions and macros for MCF_DMA_DIMR */ -+#define MCF_DMA_DIMR_TASK0 (0x00000001) -+#define MCF_DMA_DIMR_TASK1 (0x00000002) -+#define MCF_DMA_DIMR_TASK2 (0x00000004) -+#define MCF_DMA_DIMR_TASK3 (0x00000008) -+#define MCF_DMA_DIMR_TASK4 (0x00000010) -+#define MCF_DMA_DIMR_TASK5 (0x00000020) -+#define MCF_DMA_DIMR_TASK6 (0x00000040) -+#define MCF_DMA_DIMR_TASK7 (0x00000080) -+#define MCF_DMA_DIMR_TASK8 (0x00000100) -+#define MCF_DMA_DIMR_TASK9 (0x00000200) -+#define MCF_DMA_DIMR_TASK10 (0x00000400) -+#define MCF_DMA_DIMR_TASK11 (0x00000800) -+#define MCF_DMA_DIMR_TASK12 (0x00001000) -+#define MCF_DMA_DIMR_TASK13 (0x00002000) -+#define MCF_DMA_DIMR_TASK14 (0x00004000) -+#define MCF_DMA_DIMR_TASK15 (0x00008000) -+ -+/* Bit definitions and macros for MCF_DMA_IMCR */ -+#define MCF_DMA_IMCR_SRC16(x) (((x)&0x00000003)<<0) -+#define MCF_DMA_IMCR_SRC17(x) (((x)&0x00000003)<<2) -+#define MCF_DMA_IMCR_SRC18(x) (((x)&0x00000003)<<4) -+#define MCF_DMA_IMCR_SRC19(x) (((x)&0x00000003)<<6) -+#define MCF_DMA_IMCR_SRC20(x) (((x)&0x00000003)<<8) -+#define MCF_DMA_IMCR_SRC21(x) (((x)&0x00000003)<<10) -+#define MCF_DMA_IMCR_SRC22(x) (((x)&0x00000003)<<12) -+#define MCF_DMA_IMCR_SRC23(x) (((x)&0x00000003)<<14) -+#define MCF_DMA_IMCR_SRC24(x) (((x)&0x00000003)<<16) -+#define MCF_DMA_IMCR_SRC25(x) (((x)&0x00000003)<<18) -+#define MCF_DMA_IMCR_SRC26(x) (((x)&0x00000003)<<20) -+#define MCF_DMA_IMCR_SRC27(x) (((x)&0x00000003)<<22) -+#define MCF_DMA_IMCR_SRC28(x) (((x)&0x00000003)<<24) -+#define MCF_DMA_IMCR_SRC29(x) (((x)&0x00000003)<<26) -+#define MCF_DMA_IMCR_SRC30(x) (((x)&0x00000003)<<28) -+#define MCF_DMA_IMCR_SRC31(x) (((x)&0x00000003)<<30) -+#define MCF_DMA_IMCR_SRC16_FEC0RX (0x00000000) -+#define MCF_DMA_IMCR_SRC17_FEC0TX (0x00000000) -+#define MCF_DMA_IMCR_SRC18_FEC0RX (0x00000020) -+#define MCF_DMA_IMCR_SRC19_FEC0TX (0x00000080) -+#define MCF_DMA_IMCR_SRC20_FEC1RX (0x00000100) -+#define MCF_DMA_IMCR_SRC21_DREQ1 (0x00000000) -+#define MCF_DMA_IMCR_SRC21_FEC1TX (0x00000400) -+#define MCF_DMA_IMCR_SRC22_FEC0RX (0x00001000) -+#define MCF_DMA_IMCR_SRC23_FEC0TX (0x00004000) -+#define MCF_DMA_IMCR_SRC24_CTM0 (0x00010000) -+#define MCF_DMA_IMCR_SRC24_FEC1RX (0x00020000) -+#define MCF_DMA_IMCR_SRC25_CTM1 (0x00040000) -+#define MCF_DMA_IMCR_SRC25_FEC1TX (0x00080000) -+#define MCF_DMA_IMCR_SRC26_USBEP4 (0x00000000) -+#define MCF_DMA_IMCR_SRC26_CTM2 (0x00200000) -+#define MCF_DMA_IMCR_SRC27_USBEP5 (0x00000000) -+#define MCF_DMA_IMCR_SRC27_CTM3 (0x00800000) -+#define MCF_DMA_IMCR_SRC28_USBEP6 (0x00000000) -+#define MCF_DMA_IMCR_SRC28_CTM4 (0x01000000) -+#define MCF_DMA_IMCR_SRC28_DREQ1 (0x02000000) -+#define MCF_DMA_IMCR_SRC28_PSC2RX (0x03000000) -+#define MCF_DMA_IMCR_SRC29_DREQ1 (0x04000000) -+#define MCF_DMA_IMCR_SRC29_CTM5 (0x08000000) -+#define MCF_DMA_IMCR_SRC29_PSC2TX (0x0C000000) -+#define MCF_DMA_IMCR_SRC30_FEC1RX (0x00000000) -+#define MCF_DMA_IMCR_SRC30_CTM6 (0x10000000) -+#define MCF_DMA_IMCR_SRC30_PSC3RX (0x30000000) -+#define MCF_DMA_IMCR_SRC31_FEC1TX (0x00000000) -+#define MCF_DMA_IMCR_SRC31_CTM7 (0x80000000) -+#define MCF_DMA_IMCR_SRC31_PSC3TX (0xC0000000) -+ -+#endif /* __MCF548X_DMA_H__ */ ---- /dev/null -+++ b/include/asm-m68k/m5485dspi.h -@@ -0,0 +1,144 @@ -+/* -+ * File: mcf548x_dspi.h -+ * Purpose: Register and bit definitions for the MCF548X -+ * -+ * Notes: -+ * -+ */ -+ -+#ifndef _M5485DSPI_H_ -+#define _M5485DSPI_H_ -+ -+/* -+ * -+ * DMA Serial Peripheral Interface (DSPI) -+ * -+ */ -+ -+/* Register read/write macros */ -+#define MCF_DSPI_DMCR MCF_REG32(0x008A00) -+#define MCF_DSPI_DTCR MCF_REG32(0x008A08) -+#define MCF_DSPI_DCTAR0 MCF_REG32(0x008A0C) -+#define MCF_DSPI_DCTAR1 MCF_REG32(0x008A10) -+#define MCF_DSPI_DCTAR2 MCF_REG32(0x008A14) -+#define MCF_DSPI_DCTAR3 MCF_REG32(0x008A18) -+#define MCF_DSPI_DCTAR4 MCF_REG32(0x008A1C) -+#define MCF_DSPI_DCTAR5 MCF_REG32(0x008A20) -+#define MCF_DSPI_DCTAR6 MCF_REG32(0x008A24) -+#define MCF_DSPI_DCTAR7 MCF_REG32(0x008A28) -+#define MCF_DSPI_DCTARn(x) MCF_REG32(0x008A0C+(x*4)) -+#define MCF_DSPI_DSR MCF_REG32(0x008A2C) -+#define MCF_DSPI_DRSER MCF_REG32(0x008A30) -+#define MCF_DSPI_DTFR MCF_REG32(0x008A34) -+#define MCF_DSPI_DRFR MCF_REG32(0x008A38) -+#define MCF_DSPI_DTFDR0 MCF_REG32(0x008A3C) -+#define MCF_DSPI_DTFDR1 MCF_REG32(0x008A40) -+#define MCF_DSPI_DTFDR2 MCF_REG32(0x008A44) -+#define MCF_DSPI_DTFDR3 MCF_REG32(0x008A48) -+#define MCF_DSPI_DTFDRn(x) MCF_REG32(0x008A3C+(x*4)) -+#define MCF_DSPI_DRFDR0 MCF_REG32(0x008A7C) -+#define MCF_DSPI_DRFDR1 MCF_REG32(0x008A80) -+#define MCF_DSPI_DRFDR2 MCF_REG32(0x008A84) -+#define MCF_DSPI_DRFDR3 MCF_REG32(0x008A88) -+#define MCF_DSPI_DRFDRn(x) MCF_REG32(0x008A7C+(x*4)) -+ -+/* Bit definitions and macros for MCF_DSPI_DMCR */ -+#define MCF_DSPI_DMCR_HALT (0x00000001) -+#define MCF_DSPI_DMCR_SMPL_PT(x) (((x)&0x00000003)<<8) -+#define MCF_DSPI_DMCR_CRXF (0x00000400) -+#define MCF_DSPI_DMCR_CTXF (0x00000800) -+#define MCF_DSPI_DMCR_DRXF (0x00001000) -+#define MCF_DSPI_DMCR_DTXF (0x00002000) -+#define MCF_DSPI_DMCR_CSIS0 (0x00010000) -+#define MCF_DSPI_DMCR_CSIS2 (0x00040000) -+#define MCF_DSPI_DMCR_CSIS3 (0x00080000) -+#define MCF_DSPI_DMCR_CSIS5 (0x00200000) -+#define MCF_DSPI_DMCR_ROOE (0x01000000) -+#define MCF_DSPI_DMCR_PCSSE (0x02000000) -+#define MCF_DSPI_DMCR_MTFE (0x04000000) -+#define MCF_DSPI_DMCR_FRZ (0x08000000) -+#define MCF_DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28) -+#define MCF_DSPI_DMCR_CSCK (0x40000000) -+#define MCF_DSPI_DMCR_MSTR (0x80000000) -+ -+/* Bit definitions and macros for MCF_DSPI_DTCR */ -+#define MCF_DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_DSPI_DCTARn */ -+#define MCF_DSPI_DCTAR_BR(x) (((x)&0x0000000F)<<0) -+#define MCF_DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4) -+#define MCF_DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8) -+#define MCF_DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12) -+#define MCF_DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16) -+#define MCF_DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18) -+#define MCF_DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20) -+#define MCF_DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22) -+#define MCF_DSPI_DCTAR_LSBFE (0x01000000) -+#define MCF_DSPI_DCTAR_CPHA (0x02000000) -+#define MCF_DSPI_DCTAR_CPOL (0x04000000) -+/* #define MCF_DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27) */ -+#define MCF_DSPI_DCTAR_FMSZ(x) (((x)&0x0000000F)<<27) -+#define MCF_DSPI_DCTAR_PCSSCK_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR_PCSSCK_3CLK (0x00400000) -+#define MCF_DSPI_DCTAR_PCSSCK_5CLK (0x00800000) -+#define MCF_DSPI_DCTAR_PCSSCK_7CLK (0x00A00000) -+#define MCF_DSPI_DCTAR_PASC_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR_PASC_3CLK (0x00100000) -+#define MCF_DSPI_DCTAR_PASC_5CLK (0x00200000) -+#define MCF_DSPI_DCTAR_PASC_7CLK (0x00300000) -+#define MCF_DSPI_DCTAR_PDT_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR_PDT_3CLK (0x00040000) -+#define MCF_DSPI_DCTAR_PDT_5CLK (0x00080000) -+#define MCF_DSPI_DCTAR_PDT_7CLK (0x000A0000) -+#define MCF_DSPI_DCTAR_PBR_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR_PBR_3CLK (0x00010000) -+#define MCF_DSPI_DCTAR_PBR_5CLK (0x00020000) -+#define MCF_DSPI_DCTAR_PBR_7CLK (0x00030000) -+ -+/* Bit definitions and macros for MCF_DSPI_DSR */ -+#define MCF_DSPI_DSR_RXPTR(x) (((x)&0x0000000F)<<0) -+#define MCF_DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4) -+#define MCF_DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8) -+#define MCF_DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12) -+#define MCF_DSPI_DSR_RFDF (0x00020000) -+#define MCF_DSPI_DSR_RFOF (0x00080000) -+#define MCF_DSPI_DSR_TFFF (0x02000000) -+#define MCF_DSPI_DSR_TFUF (0x08000000) -+#define MCF_DSPI_DSR_EOQF (0x10000000) -+#define MCF_DSPI_DSR_TXRXS (0x40000000) -+#define MCF_DSPI_DSR_TCF (0x80000000) -+ -+/* Bit definitions and macros for MCF_DSPI_DRSER */ -+#define MCF_DSPI_DRSER_RFDFS (0x00010000) -+#define MCF_DSPI_DRSER_RFDFE (0x00020000) -+#define MCF_DSPI_DRSER_RFOFE (0x00080000) -+#define MCF_DSPI_DRSER_TFFFS (0x01000000) -+#define MCF_DSPI_DRSER_TFFFE (0x02000000) -+#define MCF_DSPI_DRSER_TFUFE (0x08000000) -+#define MCF_DSPI_DRSER_EOQFE (0x10000000) -+#define MCF_DSPI_DRSER_TCFE (0x80000000) -+ -+/* Bit definitions and macros for MCF_DSPI_DTFR */ -+#define MCF_DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF)<<0) -+#define MCF_DSPI_DTFR_CS0 (0x00010000) -+#define MCF_DSPI_DTFR_CS2 (0x00040000) -+#define MCF_DSPI_DTFR_CS3 (0x00080000) -+#define MCF_DSPI_DTFR_CS5 (0x00200000) -+#define MCF_DSPI_DTFR_CTCNT (0x04000000) -+#define MCF_DSPI_DTFR_EOQ (0x08000000) -+#define MCF_DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28) -+#define MCF_DSPI_DTFR_CONT (0x80000000) -+ -+/* Bit definitions and macros for MCF_DSPI_DRFR */ -+#define MCF_DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF)<<0) -+ -+/* Bit definitions and macros for MCF_DSPI_DTFDRn */ -+#define MCF_DSPI_DTFDRn_TXDATA(x) (((x)&0x0000FFFF)<<0) -+#define MCF_DSPI_DTFDRn_TXCMD(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_DSPI_DRFDRn */ -+#define MCF_DSPI_DRFDRn_RXDATA(x) (((x)&0x0000FFFF)<<0) -+ -+/********************************************************************/ -+ -+#endif /* _M5485DSPI_H_ */ ---- /dev/null -+++ b/include/asm-m68k/m5485gpio.h -@@ -0,0 +1,694 @@ -+/* -+ * File: mcf548x_gpio.h -+ * Purpose: Register and bit definitions for the MCF548X -+ * -+ * Notes: -+ * -+ */ -+ -+#ifndef _M5485GPIO_H_ -+#define _M5485GPIO_H_ -+ -+/********************************************************************* -+* -+* General Purpose I/O (GPIO) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_GPIO_PODR_FBCTL MCF_REG08(0x000A00) -+#define MCF_GPIO_PODR_FBCS MCF_REG08(0x000A01) -+#define MCF_GPIO_PODR_DMA MCF_REG08(0x000A02) -+#define MCF_GPIO_PODR_FEC0H MCF_REG08(0x000A04) -+#define MCF_GPIO_PODR_FEC0L MCF_REG08(0x000A05) -+#define MCF_GPIO_PODR_FEC1H MCF_REG08(0x000A06) -+#define MCF_GPIO_PODR_FEC1L MCF_REG08(0x000A07) -+#define MCF_GPIO_PODR_FECI2C MCF_REG08(0x000A08) -+#define MCF_GPIO_PODR_PCIBG MCF_REG08(0x000A09) -+#define MCF_GPIO_PODR_PCIBR MCF_REG08(0x000A0A) -+#define MCF_GPIO_PODR_PSC3PSC2 MCF_REG08(0x000A0C) -+#define MCF_GPIO_PODR_PSC1PSC0 MCF_REG08(0x000A0D) -+#define MCF_GPIO_PODR_DSPI MCF_REG08(0x000A0E) -+#define MCF_GPIO_PDDR_FBCTL MCF_REG08(0x000A10) -+#define MCF_GPIO_PDDR_FBCS MCF_REG08(0x000A11) -+#define MCF_GPIO_PDDR_DMA MCF_REG08(0x000A12) -+#define MCF_GPIO_PDDR_FEC0H MCF_REG08(0x000A14) -+#define MCF_GPIO_PDDR_FEC0L MCF_REG08(0x000A15) -+#define MCF_GPIO_PDDR_FEC1H MCF_REG08(0x000A16) -+#define MCF_GPIO_PDDR_FEC1L MCF_REG08(0x000A17) -+#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0x000A18) -+#define MCF_GPIO_PDDR_PCIBG MCF_REG08(0x000A19) -+#define MCF_GPIO_PDDR_PCIBR MCF_REG08(0x000A1A) -+#define MCF_GPIO_PDDR_PSC3PSC2 MCF_REG08(0x000A1C) -+#define MCF_GPIO_PDDR_PSC1PSC0 MCF_REG08(0x000A1D) -+#define MCF_GPIO_PDDR_DSPI MCF_REG08(0x000A1E) -+#define MCF_GPIO_PPDSDR_FBCTL MCF_REG08(0x000A20) -+#define MCF_GPIO_PPDSDR_FBCS MCF_REG08(0x000A21) -+#define MCF_GPIO_PPDSDR_DMA MCF_REG08(0x000A22) -+#define MCF_GPIO_PPDSDR_FEC0H MCF_REG08(0x000A24) -+#define MCF_GPIO_PPDSDR_FEC0L MCF_REG08(0x000A25) -+#define MCF_GPIO_PPDSDR_FEC1H MCF_REG08(0x000A26) -+#define MCF_GPIO_PPDSDR_FEC1L MCF_REG08(0x000A27) -+#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0x000A28) -+#define MCF_GPIO_PPDSDR_PCIBG MCF_REG08(0x000A29) -+#define MCF_GPIO_PPDSDR_PCIBR MCF_REG08(0x000A2A) -+#define MCF_GPIO_PPDSDR_PSC3PSC2 MCF_REG08(0x000A2C) -+#define MCF_GPIO_PPDSDR_PSC1PSC0 MCF_REG08(0x000A2D) -+#define MCF_GPIO_PPDSDR_DSPI MCF_REG08(0x000A2E) -+#define MCF_GPIO_PCLRR_FBCTL MCF_REG08(0x000A30) -+#define MCF_GPIO_PCLRR_FBCS MCF_REG08(0x000A31) -+#define MCF_GPIO_PCLRR_DMA MCF_REG08(0x000A32) -+#define MCF_GPIO_PCLRR_FEC0H MCF_REG08(0x000A34) -+#define MCF_GPIO_PCLRR_FEC0L MCF_REG08(0x000A35) -+#define MCF_GPIO_PCLRR_FEC1H MCF_REG08(0x000A36) -+#define MCF_GPIO_PCLRR_FEC1L MCF_REG08(0x000A37) -+#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0x000A38) -+#define MCF_GPIO_PCLRR_PCIBG MCF_REG08(0x000A39) -+#define MCF_GPIO_PCLRR_PCIBR MCF_REG08(0x000A3A) -+#define MCF_GPIO_PCLRR_PSC3PSC2 MCF_REG08(0x000A3C) -+#define MCF_GPIO_PCLRR_PSC1PSC0 MCF_REG08(0x000A3D) -+#define MCF_GPIO_PCLRR_DSPI MCF_REG08(0x000A3E) -+#define MCF_GPIO_PAR_FBCTL MCF_REG16(0x000A40) -+#define MCF_GPIO_PAR_FBCS MCF_REG08(0x000A42) -+#define MCF_GPIO_PAR_DMA MCF_REG08(0x000A43) -+#define MCF_GPIO_PAR_FECI2CIRQ MCF_REG16(0x000A44) -+#define MCF_GPIO_PAR_PCIBG MCF_REG16(0x000A48) -+#define MCF_GPIO_PAR_PCIBR MCF_REG16(0x000A4A) -+#define MCF_GPIO_PAR_PSC3 MCF_REG08(0x000A4C) -+#define MCF_GPIO_PAR_PSC2 MCF_REG08(0x000A4D) -+#define MCF_GPIO_PAR_PSC1 MCF_REG08(0x000A4E) -+#define MCF_GPIO_PAR_PSC0 MCF_REG08(0x000A4F) -+#define MCF_GPIO_PAR_DSPI MCF_REG16(0x000A50) -+#define MCF_GPIO_PAR_TIMER MCF_REG08(0x000A52) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_FBCTL */ -+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL0 (0x01) -+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL1 (0x02) -+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL2 (0x04) -+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL3 (0x08) -+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL4 (0x10) -+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL5 (0x20) -+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL6 (0x40) -+#define MCF_GPIO_PODR_FBCTL_PODRFBCTL7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_FBCS */ -+#define MCF_GPIO_PODR_FBCS_PODRFBCS1 (0x02) -+#define MCF_GPIO_PODR_FBCS_PODRFBCS2 (0x04) -+#define MCF_GPIO_PODR_FBCS_PODRFBCS3 (0x08) -+#define MCF_GPIO_PODR_FBCS_PODRFBCS4 (0x10) -+#define MCF_GPIO_PODR_FBCS_PODRFBCS5 (0x20) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_DMA */ -+#define MCF_GPIO_PODR_DMA_PODRDMA0 (0x01) -+#define MCF_GPIO_PODR_DMA_PODRDMA1 (0x02) -+#define MCF_GPIO_PODR_DMA_PODRDMA2 (0x04) -+#define MCF_GPIO_PODR_DMA_PODRDMA3 (0x08) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_FEC0H */ -+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H0 (0x01) -+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H1 (0x02) -+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H2 (0x04) -+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H3 (0x08) -+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H4 (0x10) -+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H5 (0x20) -+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H6 (0x40) -+#define MCF_GPIO_PODR_FEC0H_PODRFEC0H7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_FEC0L */ -+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L0 (0x01) -+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L1 (0x02) -+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L2 (0x04) -+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L3 (0x08) -+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L4 (0x10) -+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L5 (0x20) -+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L6 (0x40) -+#define MCF_GPIO_PODR_FEC0L_PODRFEC0L7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_FEC1H */ -+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H0 (0x01) -+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H1 (0x02) -+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H2 (0x04) -+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H3 (0x08) -+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H4 (0x10) -+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H5 (0x20) -+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H6 (0x40) -+#define MCF_GPIO_PODR_FEC1H_PODRFEC1H7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_FEC1L */ -+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L0 (0x01) -+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L1 (0x02) -+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L2 (0x04) -+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L3 (0x08) -+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L4 (0x10) -+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L5 (0x20) -+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L6 (0x40) -+#define MCF_GPIO_PODR_FEC1L_PODRFEC1L7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */ -+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C0 (0x01) -+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C1 (0x02) -+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C2 (0x04) -+#define MCF_GPIO_PODR_FECI2C_PODRFECI2C3 (0x08) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_PCIBG */ -+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG0 (0x01) -+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG1 (0x02) -+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG2 (0x04) -+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG3 (0x08) -+#define MCF_GPIO_PODR_PCIBG_PODRPCIBG4 (0x10) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_PCIBR */ -+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR0 (0x01) -+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR1 (0x02) -+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR2 (0x04) -+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR3 (0x08) -+#define MCF_GPIO_PODR_PCIBR_PODRPCIBR4 (0x10) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_PSC3PSC2 */ -+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC20 (0x01) -+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC21 (0x02) -+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC22 (0x04) -+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC23 (0x08) -+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC24 (0x10) -+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC25 (0x20) -+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC26 (0x40) -+#define MCF_GPIO_PODR_PSC3PSC2_PODRPSC3PSC27 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_PSC1PSC0 */ -+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC00 (0x01) -+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC01 (0x02) -+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC02 (0x04) -+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC03 (0x08) -+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC04 (0x10) -+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC05 (0x20) -+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC06 (0x40) -+#define MCF_GPIO_PODR_PSC1PSC0_PODRPSC1PSC07 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PODR_DSPI */ -+#define MCF_GPIO_PODR_DSPI_PODRDSPI0 (0x01) -+#define MCF_GPIO_PODR_DSPI_PODRDSPI1 (0x02) -+#define MCF_GPIO_PODR_DSPI_PODRDSPI2 (0x04) -+#define MCF_GPIO_PODR_DSPI_PODRDSPI3 (0x08) -+#define MCF_GPIO_PODR_DSPI_PODRDSPI4 (0x10) -+#define MCF_GPIO_PODR_DSPI_PODRDSPI5 (0x20) -+#define MCF_GPIO_PODR_DSPI_PODRDSPI6 (0x40) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_FBCTL */ -+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL0 (0x01) -+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL1 (0x02) -+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL2 (0x04) -+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL3 (0x08) -+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL4 (0x10) -+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL5 (0x20) -+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL6 (0x40) -+#define MCF_GPIO_PDDR_FBCTL_PDDRFBCTL7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_FBCS */ -+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS1 (0x02) -+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS2 (0x04) -+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS3 (0x08) -+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS4 (0x10) -+#define MCF_GPIO_PDDR_FBCS_PDDRFBCS5 (0x20) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_DMA */ -+#define MCF_GPIO_PDDR_DMA_PDDRDMA0 (0x01) -+#define MCF_GPIO_PDDR_DMA_PDDRDMA1 (0x02) -+#define MCF_GPIO_PDDR_DMA_PDDRDMA2 (0x04) -+#define MCF_GPIO_PDDR_DMA_PDDRDMA3 (0x08) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0H */ -+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H0 (0x01) -+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H1 (0x02) -+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H2 (0x04) -+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H3 (0x08) -+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H4 (0x10) -+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H5 (0x20) -+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H6 (0x40) -+#define MCF_GPIO_PDDR_FEC0H_PDDRFEC0H7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC0L */ -+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L0 (0x01) -+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L1 (0x02) -+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L2 (0x04) -+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L3 (0x08) -+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L4 (0x10) -+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L5 (0x20) -+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L6 (0x40) -+#define MCF_GPIO_PDDR_FEC0L_PDDRFEC0L7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1H */ -+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H0 (0x01) -+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H1 (0x02) -+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H2 (0x04) -+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H3 (0x08) -+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H4 (0x10) -+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H5 (0x20) -+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H6 (0x40) -+#define MCF_GPIO_PDDR_FEC1H_PDDRFEC1H7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_FEC1L */ -+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L0 (0x01) -+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L1 (0x02) -+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L2 (0x04) -+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L3 (0x08) -+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L4 (0x10) -+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L5 (0x20) -+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L6 (0x40) -+#define MCF_GPIO_PDDR_FEC1L_PDDRFEC1L7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */ -+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C0 (0x01) -+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C1 (0x02) -+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C2 (0x04) -+#define MCF_GPIO_PDDR_FECI2C_PDDRFECI2C3 (0x08) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBG */ -+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG0 (0x01) -+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG1 (0x02) -+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG2 (0x04) -+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG3 (0x08) -+#define MCF_GPIO_PDDR_PCIBG_PDDRPCIBG4 (0x10) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_PCIBR */ -+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR0 (0x01) -+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR1 (0x02) -+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR2 (0x04) -+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR3 (0x08) -+#define MCF_GPIO_PDDR_PCIBR_PDDRPCIBR4 (0x10) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_PSC3PSC2 */ -+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC20 (0x01) -+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC21 (0x02) -+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC22 (0x04) -+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC23 (0x08) -+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC24 (0x10) -+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC25 (0x20) -+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC26 (0x40) -+#define MCF_GPIO_PDDR_PSC3PSC2_PDDRPSC3PSC27 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_PSC1PSC0 */ -+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC00 (0x01) -+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC01 (0x02) -+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC02 (0x04) -+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC03 (0x08) -+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC04 (0x10) -+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC05 (0x20) -+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC06 (0x40) -+#define MCF_GPIO_PDDR_PSC1PSC0_PDDRPSC1PSC07 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PDDR_DSPI */ -+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI0 (0x01) -+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI1 (0x02) -+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI2 (0x04) -+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI3 (0x08) -+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI4 (0x10) -+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI5 (0x20) -+#define MCF_GPIO_PDDR_DSPI_PDDRDSPI6 (0x40) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCTL */ -+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL0 (0x01) -+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL1 (0x02) -+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL2 (0x04) -+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL3 (0x08) -+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL4 (0x10) -+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL5 (0x20) -+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL6 (0x40) -+#define MCF_GPIO_PPDSDR_FBCTL_PPDSDRFBCTL7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FBCS */ -+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS1 (0x02) -+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS2 (0x04) -+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS3 (0x08) -+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS4 (0x10) -+#define MCF_GPIO_PPDSDR_FBCS_PPDSDRFBCS5 (0x20) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_DMA */ -+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA0 (0x01) -+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA1 (0x02) -+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA2 (0x04) -+#define MCF_GPIO_PPDSDR_DMA_PPDSDRDMA3 (0x08) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0H */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H0 (0x01) -+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H1 (0x02) -+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H2 (0x04) -+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H3 (0x08) -+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H4 (0x10) -+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H5 (0x20) -+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H6 (0x40) -+#define MCF_GPIO_PPDSDR_FEC0H_PPDSDRFEC0H7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC0L */ -+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L0 (0x01) -+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L1 (0x02) -+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L2 (0x04) -+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L3 (0x08) -+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L4 (0x10) -+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L5 (0x20) -+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L6 (0x40) -+#define MCF_GPIO_PPDSDR_FEC0L_PPDSDRFEC0L7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1H */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H0 (0x01) -+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H1 (0x02) -+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H2 (0x04) -+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H3 (0x08) -+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H4 (0x10) -+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H5 (0x20) -+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H6 (0x40) -+#define MCF_GPIO_PPDSDR_FEC1H_PPDSDRFEC1H7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FEC1L */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L0 (0x01) -+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L1 (0x02) -+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L2 (0x04) -+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L3 (0x08) -+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L4 (0x10) -+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L5 (0x20) -+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L6 (0x40) -+#define MCF_GPIO_PPDSDR_FEC1L_PPDSDRFEC1L7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */ -+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C0 (0x01) -+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C1 (0x02) -+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C2 (0x04) -+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDRFECI2C3 (0x08) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBG */ -+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG0 (0x01) -+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG1 (0x02) -+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG2 (0x04) -+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG3 (0x08) -+#define MCF_GPIO_PPDSDR_PCIBG_PPDSDRPCIBG4 (0x10) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PCIBR */ -+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR0 (0x01) -+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR1 (0x02) -+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR2 (0x04) -+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR3 (0x08) -+#define MCF_GPIO_PPDSDR_PCIBR_PPDSDRPCIBR4 (0x10) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC3PSC2 */ -+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC20 (0x01) -+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC21 (0x02) -+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC22 (0x04) -+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC23 (0x08) -+#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC24 (0x10) -+#define MCF_GPIO_PPDSDR_PSC3PSC2_PDDRPSC3PSC25 (0x20) -+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC26 (0x40) -+#define MCF_GPIO_PPDSDR_PSC3PSC2_PPDSDRPSC3PSC27 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PSC1PSC0 */ -+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC00 (0x01) -+#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC01 (0x02) -+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC02 (0x04) -+#define MCF_GPIO_PPDSDR_PSC1PSC0_PDDRPSC1PSC03 (0x08) -+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC04 (0x10) -+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC05 (0x20) -+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC06 (0x40) -+#define MCF_GPIO_PPDSDR_PSC1PSC0_PPDSDRPSC1PSC07 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PPDSDR_DSPI */ -+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI0 (0x01) -+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI1 (0x02) -+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI2 (0x04) -+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI3 (0x08) -+#define MCF_GPIO_PPDSDR_DSPI_PDDRDSPI4 (0x10) -+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI5 (0x20) -+#define MCF_GPIO_PPDSDR_DSPI_PPDSDRDSPI6 (0x40) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCTL */ -+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL0 (0x01) -+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL1 (0x02) -+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL2 (0x04) -+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL3 (0x08) -+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL4 (0x10) -+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL5 (0x20) -+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL6 (0x40) -+#define MCF_GPIO_PCLRR_FBCTL_PCLRRFBCTL7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_FBCS */ -+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS1 (0x02) -+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS2 (0x04) -+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS3 (0x08) -+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS4 (0x10) -+#define MCF_GPIO_PCLRR_FBCS_PCLRRFBCS5 (0x20) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_DMA */ -+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA0 (0x01) -+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA1 (0x02) -+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA2 (0x04) -+#define MCF_GPIO_PCLRR_DMA_PCLRRDMA3 (0x08) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0H */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H0 (0x01) -+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H1 (0x02) -+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H2 (0x04) -+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H3 (0x08) -+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H4 (0x10) -+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H5 (0x20) -+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H6 (0x40) -+#define MCF_GPIO_PCLRR_FEC0H_PCLRRFEC0H7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC0L */ -+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L0 (0x01) -+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L1 (0x02) -+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L2 (0x04) -+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L3 (0x08) -+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L4 (0x10) -+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L5 (0x20) -+#define MCF_GPIO_PCLRR_FEC0L_PODRFEC0L6 (0x40) -+#define MCF_GPIO_PCLRR_FEC0L_PCLRRFEC0L7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1H */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H0 (0x01) -+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H1 (0x02) -+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H2 (0x04) -+#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H3 (0x08) -+#define MCF_GPIO_PCLRR_FEC1H_PODRFEC1H4 (0x10) -+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H5 (0x20) -+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H6 (0x40) -+#define MCF_GPIO_PCLRR_FEC1H_PCLRRFEC1H7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_FEC1L */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L0 (0x01) -+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L1 (0x02) -+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L2 (0x04) -+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L3 (0x08) -+#define MCF_GPIO_PCLRR_FEC1L_PODRFEC1L4 (0x10) -+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L5 (0x20) -+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L6 (0x40) -+#define MCF_GPIO_PCLRR_FEC1L_PCLRRFEC1L7 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */ -+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C0 (0x01) -+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C1 (0x02) -+#define MCF_GPIO_PCLRR_FECI2C_PODRFECI2C2 (0x04) -+#define MCF_GPIO_PCLRR_FECI2C_PCLRRFECI2C3 (0x08) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBG */ -+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG0 (0x01) -+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG1 (0x02) -+#define MCF_GPIO_PCLRR_PCIBG_PODRPCIBG2 (0x04) -+#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG3 (0x08) -+#define MCF_GPIO_PCLRR_PCIBG_PCLRRPCIBG4 (0x10) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_PCIBR */ -+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR0 (0x01) -+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR1 (0x02) -+#define MCF_GPIO_PCLRR_PCIBR_PCLRRPCIBR2 (0x04) -+#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR3 (0x08) -+#define MCF_GPIO_PCLRR_PCIBR_PODRPCIBR4 (0x10) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC3PSC2 */ -+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC20 (0x01) -+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC21 (0x02) -+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC22 (0x04) -+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC23 (0x08) -+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC24 (0x10) -+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC25 (0x20) -+#define MCF_GPIO_PCLRR_PSC3PSC2_PODRPSC3PSC26 (0x40) -+#define MCF_GPIO_PCLRR_PSC3PSC2_PCLRRPSC3PSC27 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_PSC1PSC0 */ -+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC00 (0x01) -+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC01 (0x02) -+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC02 (0x04) -+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC03 (0x08) -+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC04 (0x10) -+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC05 (0x20) -+#define MCF_GPIO_PCLRR_PSC1PSC0_PODRPSC1PSC06 (0x40) -+#define MCF_GPIO_PCLRR_PSC1PSC0_PCLRRPSC1PSC07 (0x80) -+ -+/* Bit definitions and macros for MCF_GPIO_PCLRR_DSPI */ -+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI0 (0x01) -+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI1 (0x02) -+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI2 (0x04) -+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI3 (0x08) -+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI4 (0x10) -+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI5 (0x20) -+#define MCF_GPIO_PCLRR_DSPI_PCLRRDSPI6 (0x40) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_FBCTL */ -+#define MCF_GPIO_PAR_FBCTL_PAR_TS(x) (((x)&0x0003)<<0) -+#define MCF_GPIO_PAR_FBCTL_PAR_TA (0x0004) -+#define MCF_GPIO_PAR_FBCTL_PAR_RWB (0x0010) -+#define MCF_GPIO_PAR_FBCTL_PAR_OE (0x0040) -+#define MCF_GPIO_PAR_FBCTL_PAR_BWE0 (0x0100) -+#define MCF_GPIO_PAR_FBCTL_PAR_BWE1 (0x0400) -+#define MCF_GPIO_PAR_FBCTL_PAR_BWE2 (0x1000) -+#define MCF_GPIO_PAR_FBCTL_PAR_BWE3 (0x4000) -+#define MCF_GPIO_PAR_FBCTL_PAR_TS_GPIO (0) -+#define MCF_GPIO_PAR_FBCTL_PAR_TS_TBST (2) -+#define MCF_GPIO_PAR_FBCTL_PAR_TS_TS (3) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_FBCS */ -+#define MCF_GPIO_PAR_FBCS_PAR_CS1 (0x02) -+#define MCF_GPIO_PAR_FBCS_PAR_CS2 (0x04) -+#define MCF_GPIO_PAR_FBCS_PAR_CS3 (0x08) -+#define MCF_GPIO_PAR_FBCS_PAR_CS4 (0x10) -+#define MCF_GPIO_PAR_FBCS_PAR_CS5 (0x20) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_DMA */ -+#define MCF_GPIO_PAR_DMA_PAR_DREQ0(x) (((x)&0x03)<<0) -+#define MCF_GPIO_PAR_DMA_PAR_DREQ1(x) (((x)&0x03)<<2) -+#define MCF_GPIO_PAR_DMA_PAR_DACK0(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_DMA_PAR_DACK1(x) (((x)&0x03)<<6) -+#define MCF_GPIO_PAR_DMA_PAR_DACKx_GPIO (0) -+#define MCF_GPIO_PAR_DMA_PAR_DACKx_TOUT (2) -+#define MCF_GPIO_PAR_DMA_PAR_DACKx_DACK (3) -+#define MCF_GPIO_PAR_DMA_PAR_DREQx_GPIO (0) -+#define MCF_GPIO_PAR_DMA_PAR_DREQx_TIN (2) -+#define MCF_GPIO_PAR_DMA_PAR_DREQx_DREQ (3) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_FECI2CIRQ */ -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ5 (0x0001) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_IRQ6 (0x0002) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SCL (0x0004) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_SDA (0x0008) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC(x) (((x)&0x0003)<<6) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO(x) (((x)&0x0003)<<8) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MII (0x0400) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E17 (0x0800) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDC (0x1000) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MDIO (0x2000) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E0MII (0x4000) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E07 (0x8000) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_CANRX (0x0000) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_SDA (0x0200) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDIO_EMDIO (0x0300) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_CANTX (0x0000) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_SCL (0x0080) -+#define MCF_GPIO_PAR_FECI2CIRQ_PAR_E1MDC_EMDC (0x00C0) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_PCIBG */ -+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG0(x) (((x)&0x0003)<<0) -+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG1(x) (((x)&0x0003)<<2) -+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG2(x) (((x)&0x0003)<<4) -+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG3(x) (((x)&0x0003)<<6) -+#define MCF_GPIO_PAR_PCIBG_PAR_PCIBG4(x) (((x)&0x0003)<<8) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_PCIBR */ -+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG0(x) (((x)&0x0003)<<0) -+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG1(x) (((x)&0x0003)<<2) -+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG2(x) (((x)&0x0003)<<4) -+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBG3(x) (((x)&0x0003)<<6) -+#define MCF_GPIO_PAR_PCIBR_PAR_PCIBR4(x) (((x)&0x0003)<<8) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_PSC3 */ -+#define MCF_GPIO_PAR_PSC3_PAR_TXD3 (0x04) -+#define MCF_GPIO_PAR_PSC3_PAR_RXD3 (0x08) -+#define MCF_GPIO_PAR_PSC3_PAR_RTS3(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_PSC3_PAR_CTS3(x) (((x)&0x03)<<6) -+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_GPIO (0x00) -+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_BCLK (0x80) -+#define MCF_GPIO_PAR_PSC3_PAR_CTS3_CTS (0xC0) -+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_GPIO (0x00) -+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_FSYNC (0x20) -+#define MCF_GPIO_PAR_PSC3_PAR_RTS3_RTS (0x30) -+#define MCF_GPIO_PAR_PSC3_PAR_CTS2_CANRX (0x40) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_PSC2 */ -+#define MCF_GPIO_PAR_PSC2_PAR_TXD2 (0x04) -+#define MCF_GPIO_PAR_PSC2_PAR_RXD2 (0x08) -+#define MCF_GPIO_PAR_PSC2_PAR_RTS2(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_PSC2_PAR_CTS2(x) (((x)&0x03)<<6) -+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_GPIO (0x00) -+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_BCLK (0x80) -+#define MCF_GPIO_PAR_PSC2_PAR_CTS2_CTS (0xC0) -+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_GPIO (0x00) -+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANTX (0x10) -+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_FSYNC (0x20) -+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_RTS (0x30) -+#define MCF_GPIO_PAR_PSC2_PAR_RTS2_CANRX (0x40) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_PSC1 */ -+#define MCF_GPIO_PAR_PSC1_PAR_TXD1 (0x04) -+#define MCF_GPIO_PAR_PSC1_PAR_RXD1 (0x08) -+#define MCF_GPIO_PAR_PSC1_PAR_RTS1(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_PSC1_PAR_CTS1(x) (((x)&0x03)<<6) -+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_GPIO (0x00) -+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_BCLK (0x80) -+#define MCF_GPIO_PAR_PSC1_PAR_CTS1_CTS (0xC0) -+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_GPIO (0x00) -+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_FSYNC (0x20) -+#define MCF_GPIO_PAR_PSC1_PAR_RTS1_RTS (0x30) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_PSC0 */ -+#define MCF_GPIO_PAR_PSC0_PAR_TXD0 (0x04) -+#define MCF_GPIO_PAR_PSC0_PAR_RXD0 (0x08) -+#define MCF_GPIO_PAR_PSC0_PAR_RTS0(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_PSC0_PAR_CTS0(x) (((x)&0x03)<<6) -+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_GPIO (0x00) -+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_BCLK (0x80) -+#define MCF_GPIO_PAR_PSC0_PAR_CTS0_CTS (0xC0) -+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_GPIO (0x00) -+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_FSYNC (0x20) -+#define MCF_GPIO_PAR_PSC0_PAR_RTS0_RTS (0x30) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_DSPI */ -+#define MCF_GPIO_PAR_DSPI_PAR_SOUT(x) (((x)&0x0003)<<0) -+#define MCF_GPIO_PAR_DSPI_PAR_SIN(x) (((x)&0x0003)<<2) -+#define MCF_GPIO_PAR_DSPI_PAR_SCK(x) (((x)&0x0003)<<4) -+#define MCF_GPIO_PAR_DSPI_PAR_CS0(x) (((x)&0x0003)<<6) -+#define MCF_GPIO_PAR_DSPI_PAR_CS2(x) (((x)&0x0003)<<8) -+#define MCF_GPIO_PAR_DSPI_PAR_CS3(x) (((x)&0x0003)<<10) -+#define MCF_GPIO_PAR_DSPI_PAR_CS5 (0x1000) -+#define MCF_GPIO_PAR_DSPI_PAR_CS3_GPIO (0x0000) -+#define MCF_GPIO_PAR_DSPI_PAR_CS3_CANTX (0x0400) -+#define MCF_GPIO_PAR_DSPI_PAR_CS3_TOUT (0x0800) -+#define MCF_GPIO_PAR_DSPI_PAR_CS3_DSPICS (0x0C00) -+#define MCF_GPIO_PAR_DSPI_PAR_CS2_GPIO (0x0000) -+#define MCF_GPIO_PAR_DSPI_PAR_CS2_CANTX (0x0100) -+#define MCF_GPIO_PAR_DSPI_PAR_CS2_TOUT (0x0200) -+#define MCF_GPIO_PAR_DSPI_PAR_CS2_DSPICS (0x0300) -+#define MCF_GPIO_PAR_DSPI_PAR_CS0_GPIO (0x0000) -+#define MCF_GPIO_PAR_DSPI_PAR_CS0_FSYNC (0x0040) -+#define MCF_GPIO_PAR_DSPI_PAR_CS0_RTS (0x0080) -+#define MCF_GPIO_PAR_DSPI_PAR_CS0_DSPICS (0x00C0) -+#define MCF_GPIO_PAR_DSPI_PAR_SCK_GPIO (0x0000) -+#define MCF_GPIO_PAR_DSPI_PAR_SCK_BCLK (0x0010) -+#define MCF_GPIO_PAR_DSPI_PAR_SCK_CTS (0x0020) -+#define MCF_GPIO_PAR_DSPI_PAR_SCK_SCK (0x0030) -+#define MCF_GPIO_PAR_DSPI_PAR_SIN_GPIO (0x0000) -+#define MCF_GPIO_PAR_DSPI_PAR_SIN_RXD (0x0008) -+#define MCF_GPIO_PAR_DSPI_PAR_SIN_SIN (0x000C) -+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_GPIO (0x0000) -+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_TXD (0x0002) -+#define MCF_GPIO_PAR_DSPI_PAR_SOUT_SOUT (0x0003) -+ -+/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */ -+#define MCF_GPIO_PAR_TIMER_PAR_TOUT2 (0x01) -+#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<1) -+#define MCF_GPIO_PAR_TIMER_PAR_TOUT3 (0x08) -+#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_CANRX (0x00) -+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_IRQ (0x20) -+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN (0x30) -+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_CANRX (0x00) -+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_IRQ (0x04) -+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN (0x06) -+ -+/********************************************************************/ -+ -+#endif /* _M5485GPIO_H_ */ ---- /dev/null -+++ b/include/asm-m68k/m5485gpt.h -@@ -0,0 +1,88 @@ -+/* -+ * File: mcf548x_gpt.h -+ * Purpose: Register and bit definitions for the MCF548X -+ * -+ * Notes: -+ * -+ */ -+ -+#ifndef __MCF548X_GPT_H__ -+#define __MCF548X_GPT_H__ -+ -+/********************************************************************* -+* -+* General Purpose Timers (GPT) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_GPT_GMS0 MCF_REG32(0x000800) -+#define MCF_GPT_GCIR0 MCF_REG32(0x000804) -+#define MCF_GPT_GPWM0 MCF_REG32(0x000808) -+#define MCF_GPT_GSR0 MCF_REG32(0x00080C) -+#define MCF_GPT_GMS1 MCF_REG32(0x000810) -+#define MCF_GPT_GCIR1 MCF_REG32(0x000814) -+#define MCF_GPT_GPWM1 MCF_REG32(0x000818) -+#define MCF_GPT_GSR1 MCF_REG32(0x00081C) -+#define MCF_GPT_GMS2 MCF_REG32(0x000820) -+#define MCF_GPT_GCIR2 MCF_REG32(0x000824) -+#define MCF_GPT_GPWM2 MCF_REG32(0x000828) -+#define MCF_GPT_GSR2 MCF_REG32(0x00082C) -+#define MCF_GPT_GMS3 MCF_REG32(0x000830) -+#define MCF_GPT_GCIR3 MCF_REG32(0x000834) -+#define MCF_GPT_GPWM3 MCF_REG32(0x000838) -+#define MCF_GPT_GSR3 MCF_REG32(0x00083C) -+#define MCF_GPT_GMS(x) MCF_REG32(0x000800+((x)*0x010)) -+#define MCF_GPT_GCIR(x) MCF_REG32(0x000804+((x)*0x010)) -+#define MCF_GPT_GPWM(x) MCF_REG32(0x000808+((x)*0x010)) -+#define MCF_GPT_GSR(x) MCF_REG32(0x00080C+((x)*0x010)) -+ -+/* Bit definitions and macros for MCF_GPT_GMS */ -+#define MCF_GPT_GMS_TMS(x) (((x)&0x00000007)<<0) -+#define MCF_GPT_GMS_GPIO(x) (((x)&0x00000003)<<4) -+#define MCF_GPT_GMS_IEN (0x00000100) -+#define MCF_GPT_GMS_OD (0x00000200) -+#define MCF_GPT_GMS_SC (0x00000400) -+#define MCF_GPT_GMS_CE (0x00001000) -+#define MCF_GPT_GMS_WDEN (0x00008000) -+#define MCF_GPT_GMS_ICT(x) (((x)&0x00000003)<<16) -+#define MCF_GPT_GMS_OCT(x) (((x)&0x00000003)<<20) -+#define MCF_GPT_GMS_OCPW(x) (((x)&0x000000FF)<<24) -+#define MCF_GPT_GMS_OCT_FRCLOW (0x00000000) -+#define MCF_GPT_GMS_OCT_PULSEHI (0x00100000) -+#define MCF_GPT_GMS_OCT_PULSELO (0x00200000) -+#define MCF_GPT_GMS_OCT_TOGGLE (0x00300000) -+#define MCF_GPT_GMS_ICT_ANY (0x00000000) -+#define MCF_GPT_GMS_ICT_RISE (0x00010000) -+#define MCF_GPT_GMS_ICT_FALL (0x00020000) -+#define MCF_GPT_GMS_ICT_PULSE (0x00030000) -+#define MCF_GPT_GMS_GPIO_INPUT (0x00000000) -+#define MCF_GPT_GMS_GPIO_OUTLO (0x00000020) -+#define MCF_GPT_GMS_GPIO_OUTHI (0x00000030) -+#define MCF_GPT_GMS_TMS_DISABLE (0x00000000) -+#define MCF_GPT_GMS_TMS_INCAPT (0x00000001) -+#define MCF_GPT_GMS_TMS_OUTCAPT (0x00000002) -+#define MCF_GPT_GMS_TMS_PWM (0x00000003) -+#define MCF_GPT_GMS_TMS_GPIO (0x00000004) -+ -+/* Bit definitions and macros for MCF_GPT_GCIR */ -+#define MCF_GPT_GCIR_CNT(x) (((x)&0x0000FFFF)<<0) -+#define MCF_GPT_GCIR_PRE(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_GPT_GPWM */ -+#define MCF_GPT_GPWM_LOAD (0x00000001) -+#define MCF_GPT_GPWM_PWMOP (0x00000100) -+#define MCF_GPT_GPWM_WIDTH(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_GPT_GSR */ -+#define MCF_GPT_GSR_CAPT (0x00000001) -+#define MCF_GPT_GSR_COMP (0x00000002) -+#define MCF_GPT_GSR_PWMP (0x00000004) -+#define MCF_GPT_GSR_TEXP (0x00000008) -+#define MCF_GPT_GSR_PIN (0x00000100) -+#define MCF_GPT_GSR_OVF(x) (((x)&0x00000007)<<12) -+#define MCF_GPT_GSR_CAPTURE(x) (((x)&0x0000FFFF)<<16) -+ -+/********************************************************************/ -+ -+#endif /* __MCF548X_GPT_H__ */ ---- /dev/null -+++ b/include/asm-m68k/m5485i2c.h -@@ -0,0 +1,45 @@ -+/* -+ * m5485i2c.h -- ColdFire 547x/548x i2c controller support. -+ */ -+#ifndef M548X_I2C_H -+#define M548X_I2C_H -+ -+/* Register read/write macros */ -+#define MCF_I2AR MCF_REG08(0x008F00) /* I2C Address */ -+#define MCF_I2FDR MCF_REG08(0x008F04) /* I2C Frequency Divider */ -+#define MCF_I2CR MCF_REG08(0x008F08) /* I2C Control */ -+#define MCF_I2SR MCF_REG08(0x008F0C) /* I2C Status */ -+#define MCF_I2DR MCF_REG08(0x008F10) /* I2C Data I/O */ -+#define MCF_I2ICR MCF_REG08(0x008F20) /* I2C Interrupt Control */ -+ -+/* Bit definitions and macros for MCF_I2C_I2AR */ -+#define MCF_I2AR_ADR(x) (((x)&0x7F)<<1) -+ -+/* Bit definitions and macros for MCF_I2C_I2FDR */ -+#define MCF_I2FDR_IC(x) (((x)&0x3F)<<0) -+ -+/* Bit definitions and macros for MCF_I2C_I2CR */ -+#define MCF_I2CR_RSTA (0x04) -+#define MCF_I2CR_TXAK (0x08) -+#define MCF_I2CR_MTX (0x10) -+#define MCF_I2CR_MSTA (0x20) -+#define MCF_I2CR_IIEN (0x40) -+#define MCF_I2CR_IEN (0x80) -+ -+/* Bit definitions and macros for MCF_I2C_I2SR */ -+#define MCF_I2SR_RXAK (0x01) -+#define MCF_I2SR_IIF (0x02) -+#define MCF_I2SR_SRW (0x04) -+#define MCF_I2SR_IAL (0x10) -+#define MCF_I2SR_IBB (0x20) -+#define MCF_I2SR_IAAS (0x40) -+#define MCF_I2SR_ICF (0x80) -+ -+/* Bit definitions and macros for MCF_I2C_I2ICR */ -+#define MCF_I2ICR_IE (0x01) -+#define MCF_I2ICR_RE (0x02) -+#define MCF_I2ICR_TE (0x04) -+#define MCF_I2ICR_BNBE (0x08) -+ -+/********************************************************************/ -+#endif ---- /dev/null -+++ b/include/asm-m68k/m5485pci.h -@@ -0,0 +1,330 @@ -+/* -+ * m5485pci.h -- ColdFire 547x/548x PCI controller support. -+ */ -+#ifndef __MCF548X_PCI_H__ -+#define __MCF548X_PCI_H__ -+ -+ -+/* PCI Type 0 Configuration Registers */ -+#define MCF_PCIIDR MCF_REG32(0x000B00) /* PCI Device ID/Vendor ID */ -+#define MCF_PCISCR MCF_REG32(0x000B04) /* PCI Status/Command */ -+#define MCF_PCICCRIR MCF_REG32(0x000B08) /* PCI Class Code / Revision ID */ -+#define MCF_PCICR1 MCF_REG32(0x000B0C) /* PCI Configuration 1 Register */ -+#define MCF_PCIBAR0 MCF_REG32(0x000B10) /* PCI Base Address Register 0 */ -+#define MCF_PCIBAR1 MCF_REG32(0x000B14) /* PCI Base Address Register 1 */ -+#define MCF_PCICCPR MCF_REG32(0x000B28) /* PCI Cardbus CIS Pointer */ -+#define MCF_PCISID MCF_REG32(0x000B2C) /* Subsystem ID/Subsystem Vendor ID*/ -+#define MCF_PCIERBAR MCF_REG32(0x000B30) /* PCI Expansion ROM */ -+#define MCF_PCICPR MCF_REG32(0x000B30) /* PCI Capabilities Pointer */ -+#define MCF_PCICR2 MCF_REG32(0x000B3C) /* PCI Configuration Register 2 */ -+ -+/* General Control/Status Registers */ -+#define MCF_PCIGSCR MCF_REG32(0x000B60) /* Global Status/Control Register */ -+#define MCF_PCITBATR0 MCF_REG32(0x000B64) /* Target Base Address Translation 0*/ -+#define MCF_PCITBATR1 MCF_REG32(0x000B68) /* Target Base Address Translation 1*/ -+#define MCF_PCITCR MCF_REG32(0x000B6C) /* Target Control Register */ -+#define MCF_PCIIW0BTAR MCF_REG32(0x000B70) /* Initiator Window 0 Base Address */ -+#define MCF_PCIIW1BTAR MCF_REG32(0x000B74) /* Initiator Window 1 Base Address */ -+#define MCF_PCIIW2BTAR MCF_REG32(0x000B78) /* Initiator Window 2 Base Address */ -+#define MCF_PCIIWCR MCF_REG32(0x000B80) /* Initiator Window Configuration */ -+#define MCF_PCIICR MCF_REG32(0x000B84) /* Initiator Control Register */ -+#define MCF_PCIISR MCF_REG32(0x000B88) /* Initiator Status Register */ -+#define MCF_PCICAR MCF_REG32(0x000BF8) /* Configuration Address Register */ -+ -+/* CommBus FIFO Transmit Interface Registers */ -+#define MCF_PCITPSR MCF_REG32(0x008400) /* Tx Packet Size Register */ -+#define MCF_PCITSAR MCF_REG32(0x008404) /* Tx Start Address Register */ -+#define MCF_PCITTCR MCF_REG32(0x008408) /* Tx Transaction Control Register */ -+#define MCF_PCITER MCF_REG32(0x00840C) /* Tx Enables Register */ -+#define MCF_PCITNAR MCF_REG32(0x008410) /* Tx Next Address Register */ -+#define MCF_PCITLWR MCF_REG32(0x008414) /* Tx Last Word Register */ -+#define MCF_PCITDCR MCF_REG32(0x008418) /* Tx Done Counts Register */ -+#define MCF_PCITSR MCF_REG32(0x00841C) /* Tx Status Register */ -+#define MCF_PCITFDR MCF_REG32(0x008440) /* Tx FIFO Data Register */ -+#define MCF_PCITFSR MCF_REG32(0x008444) /* Tx FIFO Status Register */ -+#define MCF_PCITFCR MCF_REG32(0x008448) /* Tx FIFO Control Register */ -+#define MCF_PCITFAR MCF_REG32(0x00844C) /* Tx FIFO Alarm Register */ -+#define MCF_PCITFRPR MCF_REG32(0x008450) /* Tx FIFO Read Pointer Register */ -+#define MCF_PCITFWPR MCF_REG32(0x008454) /* Tx FIFO Write Pointer Register */ -+ -+/* CommBus FIFO Receive Interface Registers */ -+#define MCF_PCIRPSR MCF_REG32(0x008480) /* Tx Packet Size Register */ -+#define MCF_PCIRSAR MCF_REG32(0x008484) /* Tx Start Address Register */ -+#define MCF_PCIRTCR MCF_REG32(0x008488) /* Tx Transaction Control Register */ -+#define MCF_PCIRER MCF_REG32(0x00848C) /* Tx Enables Register */ -+#define MCF_PCIRNAR MCF_REG32(0x008490) /* Tx Next Address Register */ -+#define MCF_PCIRDCR MCF_REG32(0x008498) /* Tx Done Counts Register */ -+#define MCF_PCIRSR MCF_REG32(0x00849C) /* Tx Status Register */ -+#define MCF_PCIRFDR MCF_REG32(0x0084C0) /* Tx FIFO Data Register */ -+#define MCF_PCIRFSR MCF_REG32(0x0084C4) /* Tx FIFO Status Register */ -+#define MCF_PCIRFCR MCF_REG32(0x0084C8) /* Tx FIFO Control Register */ -+#define MCF_PCIRFAR MCF_REG32(0x0084CC) /* Tx FIFO Alarm Register */ -+#define MCF_PCIRFRPR MCF_REG32(0x0084D0) /* Tx FIFO Read Pointer Register */ -+#define MCF_PCIRFWPR MCF_REG32(0x0084D4) /* Tx FIFO Write Pointer Register */ -+ -+/* PCI Arbiter Registers */ -+#define MCF_PCIARB_PACR MCF_REG32(0x000C00) -+#define MCF_PCIARB_PASR MCF_REG32(0x000C04) -+ -+ -+/* Bit definitions and macros for MCF_PCIIDR */ -+#define MCF_PCIIDR_VENDORID(x) (((x)&0x0000FFFF)<<0) -+#define MCF_PCIIDR_DEVICEID(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_PCISCR */ -+#define MCF_PCISCR_M (0x00000002) -+#define MCF_PCISCR_B (0x00000004) -+#define MCF_PCISCR_SP (0x00000008) -+#define MCF_PCISCR_MW (0x00000010) -+#define MCF_PCISCR_PER (0x00000040) -+#define MCF_PCISCR_S (0x00000100) -+#define MCF_PCISCR_F (0x00000200) -+#define MCF_PCISCR_C (0x00100000) -+#define MCF_PCISCR_66M (0x00200000) -+#define MCF_PCISCR_R (0x00400000) -+#define MCF_PCISCR_FC (0x00800000) -+#define MCF_PCISCR_DP (0x01000000) -+#define MCF_PCISCR_DT(x) (((x)&0x00000003)<<25) -+#define MCF_PCISCR_TS (0x08000000) -+#define MCF_PCISCR_TR (0x10000000) -+#define MCF_PCISCR_MA (0x20000000) -+#define MCF_PCISCR_SE (0x40000000) -+#define MCF_PCISCR_PE (0x80000000) -+ -+/* Bit definitions and macros for MCF_PCICCRIR */ -+#define MCF_PCICCRIR_REVID(x) (((x)&0x000000FF)<<0) -+#define MCF_PCICCRIR_CLASSCODE(x) (((x)&0x00FFFFFF)<<8) -+ -+/* Bit definitions and macros for MCF_PCICR1 */ -+#define MCF_PCICR1_CACHELINESIZE(x) (((x)&0x0000000F)<<0) -+#define MCF_PCICR1_LATTIMER(x) (((x)&0x000000FF)<<8) -+#define MCF_PCICR1_HEADERTYPE(x) (((x)&0x000000FF)<<16) -+#define MCF_PCICR1_BIST(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for MCF_PCIBAR# */ -+#define MCF_PCIBAR0_ADDR(x) (((x)&0x00003FFF)<<18) -+#define MCF_PCIBAR1_ADDR(x) (((x)&0x00000003)<<30) -+ -+/* Bit definitions and macros for MCF_PCICR2 */ -+#define MCF_PCICR2_INTLINE(x) (((x)&0x000000FF)<<0) -+#define MCF_PCICR2_INTPIN(x) (((x)&0x000000FF)<<8) -+#define MCF_PCICR2_MINGNT(x) (((x)&0x000000FF)<<16) -+#define MCF_PCICR2_MAXLAT(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for MCF_PCIGSCR */ -+#define MCF_PCIGSCR_PR (0x00000001) -+#define MCF_PCIGSCR_SEE (0x00001000) -+#define MCF_PCIGSCR_PEE (0x00002000) -+#define MCF_PCIGSCR_SE (0x10000000) -+#define MCF_PCIGSCR_PE (0x20000000) -+ -+/* Bit definitions and macros for MCF_PCITBATR0 */ -+#define MCF_PCITBATR0_EN (0x00000001) -+#define MCF_PCITBATR0_BAT0(x) (((x)&0x00003FFF)<<18) -+ -+/* Bit definitions and macros for MCF_PCITBATR1 */ -+#define MCF_PCITBATR1_EN (0x00000001) -+#define MCF_PCITBATR1_BAT1(x) (((x)&0x00000003)<<30) -+ -+/* Bit definitions and macros for MCF_PCITCR */ -+#define MCF_PCITCR_P (0x00010000) -+#define MCF_PCITCR_LD (0x01000000) -+ -+/* Bit definitions and macros for MCF_PCIIW0BTAR */ -+#define MCF_PCIIW0BTAR_WTA0(x) (((x)&0x000000FF)<<8) -+#define MCF_PCIIW0BTAR_WAM0(x) (((x)&0x000000FF)<<16) -+#define MCF_PCIIW0BTAR_WBA0(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for MCF_PCIIW1BTAR */ -+#define MCF_PCIIW1BTAR_WTA1(x) (((x)&0x000000FF)<<8) -+#define MCF_PCIIW1BTAR_WAM1(x) (((x)&0x000000FF)<<16) -+#define MCF_PCIIW1BTAR_WBA1(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for MCF_PCIIW2BTAR */ -+#define MCF_PCIIW2BTAR_WTA2(x) (((x)&0x000000FF)<<8) -+#define MCF_PCIIW2BTAR_WAM2(x) (((x)&0x000000FF)<<16) -+#define MCF_PCIIW2BTAR_WBA2(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for MCF_PCIIWCR */ -+#define MCF_PCIIWCR_WINCTRL2(x) (((x)&0x0000000F)<<8) -+#define MCF_PCIIWCR_WINCTRL1(x) (((x)&0x0000000F)<<16) -+#define MCF_PCIIWCR_WINCTRL0(x) (((x)&0x0000000F)<<24) -+#define MCF_PCIIWCR_WINCTRL0_MEMREAD (0x01000000) -+#define MCF_PCIIWCR_WINCTRL0_MEMRDLINE (0x03000000) -+#define MCF_PCIIWCR_WINCTRL0_MEMRDMUL (0x05000000) -+#define MCF_PCIIWCR_WINCTRL0_IO (0x09000000) -+#define MCF_PCIIWCR_WINCTRL0_E (0x01000000) -+#define MCF_PCIIWCR_WINCTRL1_MEMREAD (0x00010000) -+#define MCF_PCIIWCR_WINCTRL1_MEMRDLINE (0x00030000) -+#define MCF_PCIIWCR_WINCTRL1_MEMRDMUL (0x00050000) -+#define MCF_PCIIWCR_WINCTRL1_IO (0x00090000) -+#define MCF_PCIIWCR_WINCTRL1_E (0x00010000) -+#define MCF_PCIIWCR_WINCTRL2_MEMREAD (0x00000100) -+#define MCF_PCIIWCR_WINCTRL2_MEMRDLINE (0x00000300) -+#define MCF_PCIIWCR_WINCTRL2_MEMRDMUL (0x00000500) -+#define MCF_PCIIWCR_WINCTRL2_IO (0x00000900) -+#define MCF_PCIIWCR_WINCTRL2_E (0x00000100) -+ -+ -+/* Bit definitions and macros for MCF_PCIICR */ -+#define MCF_PCIICR_MAXRETRY(x) (((x)&0x000000FF)<<0) -+#define MCF_PCIICR_TAE (0x01000000) -+#define MCF_PCIICR_IAE (0x02000000) -+#define MCF_PCIICR_REE (0x04000000) -+ -+/* Bit definitions and macros for MCF_PCIISR */ -+#define MCF_PCIISR_TA (0x01000000) -+#define MCF_PCIISR_IA (0x02000000) -+#define MCF_PCIISR_RE (0x04000000) -+ -+/* Bit definitions and macros for MCF_PCICAR */ -+#define MCF_PCICAR_DWORD(x) (((x)&0x0000003F)<<2) -+#define MCF_PCICAR_FUNCNUM(x) (((x)&0x00000007)<<8) -+#define MCF_PCICAR_DEVNUM(x) (((x)&0x0000001F)<<11) -+#define MCF_PCICAR_BUSNUM(x) (((x)&0x000000FF)<<16) -+#define MCF_PCICAR_E (0x80000000) -+ -+/* Bit definitions and macros for MCF_PCITPSR */ -+#define MCF_PCITPSR_PKTSIZE(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_PCITTCR */ -+#define MCF_PCITTCR_DI (0x00000001) -+#define MCF_PCITTCR_W (0x00000010) -+#define MCF_PCITTCR_MAXBEATS(x) (((x)&0x00000007)<<8) -+#define MCF_PCITTCR_MAXRETRY(x) (((x)&0x000000FF)<<16) -+#define MCF_PCITTCR_PCICMD(x) (((x)&0x0000000F)<<24) -+ -+/* Bit definitions and macros for MCF_PCITER */ -+#define MCF_PCITER_NE (0x00010000) -+#define MCF_PCITER_IAE (0x00020000) -+#define MCF_PCITER_TAE (0x00040000) -+#define MCF_PCITER_RE (0x00080000) -+#define MCF_PCITER_SE (0x00100000) -+#define MCF_PCITER_FEE (0x00200000) -+#define MCF_PCITER_ME (0x01000000) -+#define MCF_PCITER_BE (0x08000000) -+#define MCF_PCITER_CM (0x10000000) -+#define MCF_PCITER_RF (0x40000000) -+#define MCF_PCITER_RC (0x80000000) -+ -+/* Bit definitions and macros for MCF_PCITDCR */ -+#define MCF_PCITDCR_PKTSDONE(x) (((x)&0x0000FFFF)<<0) -+#define MCF_PCITDCR_BYTESDONE(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_PCITSR */ -+#define MCF_PCITSR_IA (0x00010000) -+#define MCF_PCITSR_TA (0x00020000) -+#define MCF_PCITSR_RE (0x00040000) -+#define MCF_PCITSR_SE (0x00080000) -+#define MCF_PCITSR_FE (0x00100000) -+#define MCF_PCITSR_BE1 (0x00200000) -+#define MCF_PCITSR_BE2 (0x00400000) -+#define MCF_PCITSR_BE3 (0x00800000) -+#define MCF_PCITSR_NT (0x01000000) -+ -+/* Bit definitions and macros for MCF_PCITFSR */ -+#define MCF_PCITFSR_EMT (0x00010000) -+#define MCF_PCITFSR_ALARM (0x00020000) -+#define MCF_PCITFSR_FU (0x00040000) -+#define MCF_PCITFSR_FR (0x00080000) -+#define MCF_PCITFSR_OF (0x00100000) -+#define MCF_PCITFSR_UF (0x00200000) -+#define MCF_PCITFSR_RXW (0x00400000) -+ -+/* Bit definitions and macros for MCF_PCITFCR */ -+#define MCF_PCITFCR_OF_MSK (0x00080000) -+#define MCF_PCITFCR_UF_MSK (0x00100000) -+#define MCF_PCITFCR_RXW_MSK (0x00200000) -+#define MCF_PCITFCR_FAE_MSK (0x00400000) -+#define MCF_PCITFCR_IP_MSK (0x00800000) -+#define MCF_PCITFCR_GR(x) (((x)&0x00000007)<<24) -+ -+/* Bit definitions and macros for MCF_PCITFAR */ -+#define MCF_PCITFAR_ALARM(x) (((x)&0x0000007F)<<0) -+ -+/* Bit definitions and macros for MCF_PCITFRPR */ -+#define MCF_PCITFRPR_READ(x) (((x)&0x00000FFF)<<0) -+ -+/* Bit definitions and macros for MCF_PCITFWPR */ -+#define MCF_PCITFWPR_WRITE(x) (((x)&0x00000FFF)<<0) -+ -+/* Bit definitions and macros for MCF_PCIRPSR */ -+#define MCF_PCIRPSR_PKTSIZE(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_PCIRTCR */ -+#define MCF_PCIRTCR_DI (0x00000001) -+#define MCF_PCIRTCR_W (0x00000010) -+#define MCF_PCIRTCR_MAXBEATS(x) (((x)&0x00000007)<<8) -+#define MCF_PCIRTCR_FB (0x00001000) -+#define MCF_PCIRTCR_MAXRETRY(x) (((x)&0x000000FF)<<16) -+#define MCF_PCIRTCR_PCICMD(x) (((x)&0x0000000F)<<24) -+ -+/* Bit definitions and macros for MCF_PCIRER */ -+#define MCF_PCIRER_NE (0x00010000) -+#define MCF_PCIRER_IAE (0x00020000) -+#define MCF_PCIRER_TAE (0x00040000) -+#define MCF_PCIRER_RE (0x00080000) -+#define MCF_PCIRER_SE (0x00100000) -+#define MCF_PCIRER_FEE (0x00200000) -+#define MCF_PCIRER_ME (0x01000000) -+#define MCF_PCIRER_BE (0x08000000) -+#define MCF_PCIRER_CM (0x10000000) -+#define MCF_PCIRER_FE (0x20000000) -+#define MCF_PCIRER_RF (0x40000000) -+#define MCF_PCIRER_RC (0x80000000) -+ -+/* Bit definitions and macros for MCF_PCIRDCR */ -+#define MCF_PCIRDCR_PKTSDONE(x) (((x)&0x0000FFFF)<<0) -+#define MCF_PCIRDCR_BYTESDONE(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_PCIRSR */ -+#define MCF_PCIRSR_IA (0x00010000) -+#define MCF_PCIRSR_TA (0x00020000) -+#define MCF_PCIRSR_RE (0x00040000) -+#define MCF_PCIRSR_SE (0x00080000) -+#define MCF_PCIRSR_FE (0x00100000) -+#define MCF_PCIRSR_BE1 (0x00200000) -+#define MCF_PCIRSR_BE2 (0x00400000) -+#define MCF_PCIRSR_BE3 (0x00800000) -+#define MCF_PCIRSR_NT (0x01000000) -+ -+/* Bit definitions and macros for MCF_PCIRFSR */ -+#define MCF_PCIRFSR_EMT (0x00010000) -+#define MCF_PCIRFSR_ALARM (0x00020000) -+#define MCF_PCIRFSR_FU (0x00040000) -+#define MCF_PCIRFSR_FR (0x00080000) -+#define MCF_PCIRFSR_OF (0x00100000) -+#define MCF_PCIRFSR_UF (0x00200000) -+#define MCF_PCIRFSR_RXW (0x00400000) -+ -+/* Bit definitions and macros for MCF_PCIRFCR */ -+#define MCF_PCIRFCR_OF_MSK (0x00080000) -+#define MCF_PCIRFCR_UF_MSK (0x00100000) -+#define MCF_PCIRFCR_RXW_MSK (0x00200000) -+#define MCF_PCIRFCR_FAE_MSK (0x00400000) -+#define MCF_PCIRFCR_IP_MSK (0x00800000) -+#define MCF_PCIRFCR_GR(x) (((x)&0x00000007)<<24) -+ -+/* Bit definitions and macros for MCF_PCIRFAR */ -+#define MCF_PCIRFAR_ALARM(x) (((x)&0x0000007F)<<0) -+ -+/* Bit definitions and macros for MCF_PCIRFRPR */ -+#define MCF_PCIRFRPR_READ(x) (((x)&0x00000FFF)<<0) -+ -+/* Bit definitions and macros for MCF_PCIRFWPR */ -+#define MCF_PCIRFWPR_WRITE(x) (((x)&0x00000FFF)<<0) -+ -+ -+/* Bit definitions and macros for MCF_PCIARB_PACR */ -+#define MCF_PCIARB_PACR_INTMPRI (0x00000001) -+#define MCF_PCIARB_PACR_EXTMPRI(x) (((x)&0x0000001F)<<1) -+#define MCF_PCIARB_PACR_INTMINTEN (0x00010000) -+#define MCF_PCIARB_PACR_EXTMINTEN(x) (((x)&0x0000001F)<<17) -+#define MCF_PCIARB_PACR_PKMD (0x40000000) -+#define MCF_PCIARB_PACR_DS (0x80000000) -+ -+/* Bit definitions and macros for MCF_PCIARB_PASR */ -+#define MCF_PCIARB_PASR_ITLMBK (0x00010000) -+#define MCF_PCIARB_PASR_EXTMBK(x) (((x)&0x0000001F)<<17) -+ -+#endif /* __MCF548X_PCI_H__ */ ---- /dev/null -+++ b/include/asm-m68k/m5485psc.h -@@ -0,0 +1,474 @@ -+/* -+ * File: mcf548x_psc.h -+ * Purpose: Register and bit definitions for the MCF548X -+ * -+ * Notes: -+ * -+ */ -+ -+#ifndef __MCF548X_PSC_H__ -+#define __MCF548X_PSC_H__ -+ -+/********************************************************************* -+* -+* Programmable Serial Controller (PSC) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_PSC_MR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008600)) -+#define MCF_PSC_SR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008604)) -+#define MCF_PSC_CSR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008604)) -+#define MCF_PSC_CR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008608)) -+#define MCF_PSC_RB0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) -+#define MCF_PSC_TB0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) -+#define MCF_PSC_TB_8BIT0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) -+#define MCF_PSC_TB_16BIT0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) -+#define MCF_PSC_TB_AC970 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C)) -+#define MCF_PSC_IPCR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610)) -+#define MCF_PSC_ACR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610)) -+#define MCF_PSC_ISR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614)) -+#define MCF_PSC_IMR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614)) -+#define MCF_PSC_CTUR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008618)) -+#define MCF_PSC_CTLR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00861C)) -+#define MCF_PSC_IP0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008634)) -+#define MCF_PSC_OPSET0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008638)) -+#define MCF_PSC_OPRESET0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00863C)) -+#define MCF_PSC_SICR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008640)) -+#define MCF_PSC_IRCR10 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008644)) -+#define MCF_PSC_IRCR20 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008648)) -+#define MCF_PSC_IRSDR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00864C)) -+#define MCF_PSC_IRMDR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008650)) -+#define MCF_PSC_IRFDR0 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008654)) -+#define MCF_PSC_RFCNT0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008658)) -+#define MCF_PSC_TFCNT0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00865C)) -+#define MCF_PSC_RFSR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008664)) -+#define MCF_PSC_TFSR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008684)) -+#define MCF_PSC_RFCR0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008668)) -+#define MCF_PSC_TFCR0 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008688)) -+#define MCF_PSC_RFAR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00866E)) -+#define MCF_PSC_TFAR0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00868E)) -+#define MCF_PSC_RFRP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008672)) -+#define MCF_PSC_TFRP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008692)) -+#define MCF_PSC_RFWP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008676)) -+#define MCF_PSC_TFWP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008696)) -+#define MCF_PSC_RLRFP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867A)) -+#define MCF_PSC_TLRFP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869A)) -+#define MCF_PSC_RLWFP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867E)) -+#define MCF_PSC_TLWFP0 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869E)) -+#define MCF_PSC_MR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008700)) -+#define MCF_PSC_SR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008704)) -+#define MCF_PSC_CSR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008704)) -+#define MCF_PSC_CR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008708)) -+#define MCF_PSC_RB1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) -+#define MCF_PSC_TB1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) -+#define MCF_PSC_TB_8BIT1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) -+#define MCF_PSC_TB_16BIT1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) -+#define MCF_PSC_TB_AC971 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00870C)) -+#define MCF_PSC_IPCR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008710)) -+#define MCF_PSC_ACR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008710)) -+#define MCF_PSC_ISR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008714)) -+#define MCF_PSC_IMR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008714)) -+#define MCF_PSC_CTUR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008718)) -+#define MCF_PSC_CTLR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00871C)) -+#define MCF_PSC_IP1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008734)) -+#define MCF_PSC_OPSET1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008738)) -+#define MCF_PSC_OPRESET1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00873C)) -+#define MCF_PSC_SICR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008740)) -+#define MCF_PSC_IRCR11 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008744)) -+#define MCF_PSC_IRCR21 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008748)) -+#define MCF_PSC_IRSDR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00874C)) -+#define MCF_PSC_IRMDR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008750)) -+#define MCF_PSC_IRFDR1 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008754)) -+#define MCF_PSC_RFCNT1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008758)) -+#define MCF_PSC_TFCNT1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00875C)) -+#define MCF_PSC_RFSR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008764)) -+#define MCF_PSC_TFSR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008784)) -+#define MCF_PSC_RFCR1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008768)) -+#define MCF_PSC_TFCR1 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008788)) -+#define MCF_PSC_RFAR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00876E)) -+#define MCF_PSC_TFAR1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00878E)) -+#define MCF_PSC_RFRP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008772)) -+#define MCF_PSC_TFRP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008792)) -+#define MCF_PSC_RFWP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008776)) -+#define MCF_PSC_TFWP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008796)) -+#define MCF_PSC_RLRFP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00877A)) -+#define MCF_PSC_TLRFP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00879A)) -+#define MCF_PSC_RLWFP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00877E)) -+#define MCF_PSC_TLWFP1 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00879E)) -+#define MCF_PSC_MR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008800)) -+#define MCF_PSC_SR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008804)) -+#define MCF_PSC_CSR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008804)) -+#define MCF_PSC_CR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008808)) -+#define MCF_PSC_RB2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) -+#define MCF_PSC_TB2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) -+#define MCF_PSC_TB_8BIT2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) -+#define MCF_PSC_TB_16BIT2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) -+#define MCF_PSC_TB_AC972 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00880C)) -+#define MCF_PSC_IPCR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008810)) -+#define MCF_PSC_ACR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008810)) -+#define MCF_PSC_ISR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008814)) -+#define MCF_PSC_IMR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008814)) -+#define MCF_PSC_CTUR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008818)) -+#define MCF_PSC_CTLR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00881C)) -+#define MCF_PSC_IP2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008834)) -+#define MCF_PSC_OPSET2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008838)) -+#define MCF_PSC_OPRESET2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00883C)) -+#define MCF_PSC_SICR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008840)) -+#define MCF_PSC_IRCR12 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008844)) -+#define MCF_PSC_IRCR22 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008848)) -+#define MCF_PSC_IRSDR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00884C)) -+#define MCF_PSC_IRMDR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008850)) -+#define MCF_PSC_IRFDR2 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008854)) -+#define MCF_PSC_RFCNT2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008858)) -+#define MCF_PSC_TFCNT2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00885C)) -+#define MCF_PSC_RFSR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008864)) -+#define MCF_PSC_TFSR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008884)) -+#define MCF_PSC_RFCR2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008868)) -+#define MCF_PSC_TFCR2 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008888)) -+#define MCF_PSC_RFAR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00886E)) -+#define MCF_PSC_TFAR2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00888E)) -+#define MCF_PSC_RFRP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008872)) -+#define MCF_PSC_TFRP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008892)) -+#define MCF_PSC_RFWP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008876)) -+#define MCF_PSC_TFWP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008896)) -+#define MCF_PSC_RLRFP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00887A)) -+#define MCF_PSC_TLRFP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00889A)) -+#define MCF_PSC_RLWFP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00887E)) -+#define MCF_PSC_TLWFP2 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00889E)) -+#define MCF_PSC_MR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008900)) -+#define MCF_PSC_SR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008904)) -+#define MCF_PSC_CSR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008904)) -+#define MCF_PSC_CR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008908)) -+#define MCF_PSC_RB3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) -+#define MCF_PSC_TB3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) -+#define MCF_PSC_TB_8BIT3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) -+#define MCF_PSC_TB_16BIT3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) -+#define MCF_PSC_TB_AC973 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00890C)) -+#define MCF_PSC_IPCR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008910)) -+#define MCF_PSC_ACR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008910)) -+#define MCF_PSC_ISR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008914)) -+#define MCF_PSC_IMR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008914)) -+#define MCF_PSC_CTUR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008918)) -+#define MCF_PSC_CTLR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00891C)) -+#define MCF_PSC_IP3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008934)) -+#define MCF_PSC_OPSET3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008938)) -+#define MCF_PSC_OPRESET3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00893C)) -+#define MCF_PSC_SICR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008940)) -+#define MCF_PSC_IRCR13 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008944)) -+#define MCF_PSC_IRCR23 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008948)) -+#define MCF_PSC_IRSDR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00894C)) -+#define MCF_PSC_IRMDR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008950)) -+#define MCF_PSC_IRFDR3 (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008954)) -+#define MCF_PSC_RFCNT3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008958)) -+#define MCF_PSC_TFCNT3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00895C)) -+#define MCF_PSC_RFSR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008964)) -+#define MCF_PSC_TFSR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008984)) -+#define MCF_PSC_RFCR3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008968)) -+#define MCF_PSC_TFCR3 (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008988)) -+#define MCF_PSC_RFAR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00896E)) -+#define MCF_PSC_TFAR3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00898E)) -+#define MCF_PSC_RFRP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008972)) -+#define MCF_PSC_TFRP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008992)) -+#define MCF_PSC_RFWP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008976)) -+#define MCF_PSC_TFWP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008996)) -+#define MCF_PSC_RLRFP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00897A)) -+#define MCF_PSC_TLRFP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00899A)) -+#define MCF_PSC_RLWFP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00897E)) -+#define MCF_PSC_TLWFP3 (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00899E)) -+#define MCF_PSC_MR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008600+((x)*0x100))) -+#define MCF_PSC_SR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008604+((x)*0x100))) -+#define MCF_PSC_CSR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008604+((x)*0x100))) -+#define MCF_PSC_CR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008608+((x)*0x100))) -+#define MCF_PSC_RB(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) -+#define MCF_PSC_TB(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) -+#define MCF_PSC_TB_8BIT(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) -+#define MCF_PSC_TB_16BIT(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) -+#define MCF_PSC_TB_AC97(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x00860C+((x)*0x100))) -+#define MCF_PSC_IPCR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610+((x)*0x100))) -+#define MCF_PSC_ACR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008610+((x)*0x100))) -+#define MCF_PSC_ISR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614+((x)*0x100))) -+#define MCF_PSC_IMR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008614+((x)*0x100))) -+#define MCF_PSC_CTUR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008618+((x)*0x100))) -+#define MCF_PSC_CTLR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00861C+((x)*0x100))) -+#define MCF_PSC_IP(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008634+((x)*0x100))) -+#define MCF_PSC_OPSET(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008638+((x)*0x100))) -+#define MCF_PSC_OPRESET(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00863C+((x)*0x100))) -+#define MCF_PSC_SICR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008640+((x)*0x100))) -+#define MCF_PSC_IRCR1(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008644+((x)*0x100))) -+#define MCF_PSC_IRCR2(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008648+((x)*0x100))) -+#define MCF_PSC_IRSDR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x00864C+((x)*0x100))) -+#define MCF_PSC_IRMDR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008650+((x)*0x100))) -+#define MCF_PSC_IRFDR(x) (*(volatile uint8_t *)(void*)(MCF_MBAR + 0x008654+((x)*0x100))) -+#define MCF_PSC_RFCNT(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008658+((x)*0x100))) -+#define MCF_PSC_TFCNT(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00865C+((x)*0x100))) -+#define MCF_PSC_RFSR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008664+((x)*0x100))) -+#define MCF_PSC_TFSR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008684+((x)*0x100))) -+#define MCF_PSC_RFCR(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008668+((x)*0x100))) -+#define MCF_PSC_TFCR(x) (*(volatile uint32_t*)(void*)(MCF_MBAR + 0x008688+((x)*0x100))) -+#define MCF_PSC_RFAR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + (0x00866E)+((x)*0x100))) -+#define MCF_PSC_TFAR(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + (0x00868E)+((x)*0x100))) -+#define MCF_PSC_RFRP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008672+((x)*0x100))) -+#define MCF_PSC_TFRP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008692+((x)*0x100))) -+#define MCF_PSC_RFWP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008676+((x)*0x100))) -+#define MCF_PSC_TFWP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x008696+((x)*0x100))) -+#define MCF_PSC_RLRFP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867A+((x)*0x100))) -+#define MCF_PSC_TLRFP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869A+((x)*0x100))) -+#define MCF_PSC_RLWFP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00867E+((x)*0x100))) -+#define MCF_PSC_TLWFP(x) (*(volatile uint16_t*)(void*)(MCF_MBAR + 0x00869E+((x)*0x100))) -+ -+/* Bit definitions and macros for MCF_PSC_MR */ -+#define MCF_PSC_MR_BC(x) (((x)&0x03)<<0) -+#define MCF_PSC_MR_PT (0x04) -+#define MCF_PSC_MR_PM(x) (((x)&0x03)<<3) -+#define MCF_PSC_MR_ERR (0x20) -+#define MCF_PSC_MR_RXIRQ (0x40) -+#define MCF_PSC_MR_RXRTS (0x80) -+#define MCF_PSC_MR_SB(x) (((x)&0x0F)<<0) -+#define MCF_PSC_MR_TXCTS (0x10) -+#define MCF_PSC_MR_TXRTS (0x20) -+#define MCF_PSC_MR_CM(x) (((x)&0x03)<<6) -+#define MCF_PSC_MR_PM_MULTI_ADDR (0x1C) -+#define MCF_PSC_MR_PM_MULTI_DATA (0x18) -+#define MCF_PSC_MR_PM_NONE (0x10) -+#define MCF_PSC_MR_PM_FORCE_HI (0x0C) -+#define MCF_PSC_MR_PM_FORCE_LO (0x08) -+#define MCF_PSC_MR_PM_ODD (0x04) -+#define MCF_PSC_MR_PM_EVEN (0x00) -+#define MCF_PSC_MR_BC_5 (0x00) -+#define MCF_PSC_MR_BC_6 (0x01) -+#define MCF_PSC_MR_BC_7 (0x02) -+#define MCF_PSC_MR_BC_8 (0x03) -+#define MCF_PSC_MR_CM_NORMAL (0x00) -+#define MCF_PSC_MR_CM_ECHO (0x40) -+#define MCF_PSC_MR_CM_LOCAL_LOOP (0x80) -+#define MCF_PSC_MR_CM_REMOTE_LOOP (0xC0) -+#define MCF_PSC_MR_SB_STOP_BITS_1 (0x07) -+#define MCF_PSC_MR_SB_STOP_BITS_15 (0x08) -+#define MCF_PSC_MR_SB_STOP_BITS_2 (0x0F) -+ -+/* Bit definitions and macros for MCF_PSC_SR */ -+#define MCF_PSC_SR_ERR (0x0040) -+#define MCF_PSC_SR_CDE_DEOF (0x0080) -+#define MCF_PSC_SR_RXRDY (0x0100) -+#define MCF_PSC_SR_FU (0x0200) -+#define MCF_PSC_SR_TXRDY (0x0400) -+#define MCF_PSC_SR_TXEMP_URERR (0x0800) -+#define MCF_PSC_SR_OE (0x1000) -+#define MCF_PSC_SR_PE_CRCERR (0x2000) -+#define MCF_PSC_SR_FE_PHYERR (0x4000) -+#define MCF_PSC_SR_RB_NEOF (0x8000) -+ -+/* Bit definitions and macros for MCF_PSC_CSR */ -+#define MCF_PSC_CSR_TCSEL(x) (((x)&0x0F)<<0) -+#define MCF_PSC_CSR_RCSEL(x) (((x)&0x0F)<<4) -+#define MCF_PSC_CSR_RCSEL_SYS_CLK (0xD0) -+#define MCF_PSC_CSR_RCSEL_CTM16 (0xE0) -+#define MCF_PSC_CSR_RCSEL_CTM (0xF0) -+#define MCF_PSC_CSR_TCSEL_SYS_CLK (0x0D) -+#define MCF_PSC_CSR_TCSEL_CTM16 (0x0E) -+#define MCF_PSC_CSR_TCSEL_CTM (0x0F) -+ -+/* Bit definitions and macros for MCF_PSC_CR */ -+#define MCF_PSC_CR_RXC(x) (((x)&0x03)<<0) -+#define MCF_PSC_CR_TXC(x) (((x)&0x03)<<2) -+#define MCF_PSC_CR_MISC(x) (((x)&0x07)<<4) -+#define MCF_PSC_CR_NONE (0x00) -+#define MCF_PSC_CR_STOP_BREAK (0x70) -+#define MCF_PSC_CR_START_BREAK (0x60) -+#define MCF_PSC_CR_BKCHGINT (0x50) -+#define MCF_PSC_CR_RESET_ERROR (0x40) -+#define MCF_PSC_CR_RESET_TX (0x30) -+#define MCF_PSC_CR_RESET_RX (0x20) -+#define MCF_PSC_CR_RESET_MR (0x10) -+#define MCF_PSC_CR_TX_DISABLED (0x08) -+#define MCF_PSC_CR_TX_ENABLED (0x04) -+#define MCF_PSC_CR_RX_DISABLED (0x02) -+#define MCF_PSC_CR_RX_ENABLED (0x01) -+ -+/* Bit definitions and macros for MCF_PSC_TB_8BIT */ -+#define MCF_PSC_TB_8BIT_TB3(x) (((x)&0x000000FF)<<0) -+#define MCF_PSC_TB_8BIT_TB2(x) (((x)&0x000000FF)<<8) -+#define MCF_PSC_TB_8BIT_TB1(x) (((x)&0x000000FF)<<16) -+#define MCF_PSC_TB_8BIT_TB0(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for MCF_PSC_TB_16BIT */ -+#define MCF_PSC_TB_16BIT_TB1(x) (((x)&0x0000FFFF)<<0) -+#define MCF_PSC_TB_16BIT_TB0(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for MCF_PSC_TB_AC97 */ -+#define MCF_PSC_TB_AC97_SOF (0x00000800) -+#define MCF_PSC_TB_AC97_TB(x) (((x)&0x000FFFFF)<<12) -+ -+/* Bit definitions and macros for MCF_PSC_IPCR */ -+#define MCF_PSC_IPCR_RESERVED (0x0C) -+#define MCF_PSC_IPCR_CTS (0x0D) -+#define MCF_PSC_IPCR_D_CTS (0x1C) -+#define MCF_PSC_IPCR_SYNC (0x8C) -+ -+/* Bit definitions and macros for MCF_PSC_ACR */ -+#define MCF_PSC_ACR_IEC0 (0x01) -+#define MCF_PSC_ACR_CTMS(x) (((x)&0x07)<<4) -+#define MCF_PSC_ACR_BRG (0x80) -+ -+/* Bit definitions and macros for MCF_PSC_ISR */ -+#define MCF_PSC_ISR_ERR (0x0040) -+#define MCF_PSC_ISR_DEOF (0x0080) -+#define MCF_PSC_ISR_TXRDY (0x0100) -+#define MCF_PSC_ISR_RXRDY_FU (0x0200) -+#define MCF_PSC_ISR_DB (0x0400) -+#define MCF_PSC_ISR_IPC (0x8000) -+ -+/* Bit definitions and macros for MCF_PSC_IMR */ -+#define MCF_PSC_IMR_ERR (0x0040) -+#define MCF_PSC_IMR_DEOF (0x0080) -+#define MCF_PSC_IMR_TXRDY (0x0100) -+#define MCF_PSC_IMR_RXRDY_FU (0x0200) -+#define MCF_PSC_IMR_DB (0x0400) -+#define MCF_PSC_IMR_IPC (0x8000) -+ -+/* Bit definitions and macros for MCF_PSC_IP */ -+#define MCF_PSC_IP_CTS (0x01) -+#define MCF_PSC_IP_TGL (0x40) -+#define MCF_PSC_IP_LWPR_B (0x80) -+ -+/* Bit definitions and macros for MCF_PSC_OPSET */ -+#define MCF_PSC_OPSET_RTS (0x01) -+ -+/* Bit definitions and macros for MCF_PSC_OPRESET */ -+#define MCF_PSC_OPRESET_RTS (0x01) -+ -+/* Bit definitions and macros for MCF_PSC_SICR */ -+#define MCF_PSC_SICR_SIM(x) (((x)&0x07)<<0) -+#define MCF_PSC_SICR_SHDIR (0x10) -+#define MCF_PSC_SICR_DTS (0x20) -+#define MCF_PSC_SICR_AWR (0x40) -+#define MCF_PSC_SICR_ACRB (0x80) -+#define MCF_PSC_SICR_SIM_UART (0x00) -+#define MCF_PSC_SICR_SIM_MODEM8 (0x01) -+#define MCF_PSC_SICR_SIM_MODEM16 (0x02) -+#define MCF_PSC_SICR_SIM_AC97 (0x03) -+#define MCF_PSC_SICR_SIM_SIR (0x04) -+#define MCF_PSC_SICR_SIM_MIR (0x05) -+#define MCF_PSC_SICR_SIM_FIR (0x06) -+ -+/* Bit definitions and macros for MCF_PSC_IRCR1 */ -+#define MCF_PSC_IRCR1_SPUL (0x01) -+#define MCF_PSC_IRCR1_SIPEN (0x02) -+#define MCF_PSC_IRCR1_FD (0x04) -+ -+/* Bit definitions and macros for MCF_PSC_IRCR2 */ -+#define MCF_PSC_IRCR2_NXTEOF (0x01) -+#define MCF_PSC_IRCR2_ABORT (0x02) -+#define MCF_PSC_IRCR2_SIPREQ (0x04) -+ -+/* Bit definitions and macros for MCF_PSC_IRMDR */ -+#define MCF_PSC_IRMDR_M_FDIV(x) (((x)&0x7F)<<0) -+#define MCF_PSC_IRMDR_FREQ (0x80) -+ -+/* Bit definitions and macros for MCF_PSC_IRFDR */ -+#define MCF_PSC_IRFDR_F_FDIV(x) (((x)&0x0F)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_RFCNT */ -+#define MCF_PSC_RFCNT_CNT(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_TFCNT */ -+#define MCF_PSC_TFCNT_CNT(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_RFSR */ -+#define MCF_PSC_RFSR_EMT (0x0001) -+#define MCF_PSC_RFSR_ALARM (0x0002) -+#define MCF_PSC_RFSR_FU (0x0004) -+#define MCF_PSC_RFSR_FRMRY (0x0008) -+#define MCF_PSC_RFSR_OF (0x0010) -+#define MCF_PSC_RFSR_UF (0x0020) -+#define MCF_PSC_RFSR_RXW (0x0040) -+#define MCF_PSC_RFSR_FAE (0x0080) -+#define MCF_PSC_RFSR_FRM(x) (((x)&0x000F)<<8) -+#define MCF_PSC_RFSR_TAG (0x1000) -+#define MCF_PSC_RFSR_TXW (0x4000) -+#define MCF_PSC_RFSR_IP (0x8000) -+#define MCF_PSC_RFSR_FRM_BYTE0 (0x0800) -+#define MCF_PSC_RFSR_FRM_BYTE1 (0x0400) -+#define MCF_PSC_RFSR_FRM_BYTE2 (0x0200) -+#define MCF_PSC_RFSR_FRM_BYTE3 (0x0100) -+ -+/* Bit definitions and macros for MCF_PSC_TFSR */ -+#define MCF_PSC_TFSR_EMT (0x0001) -+#define MCF_PSC_TFSR_ALARM (0x0002) -+#define MCF_PSC_TFSR_FU (0x0004) -+#define MCF_PSC_TFSR_FRMRY (0x0008) -+#define MCF_PSC_TFSR_OF (0x0010) -+#define MCF_PSC_TFSR_UF (0x0020) -+#define MCF_PSC_TFSR_RXW (0x0040) -+#define MCF_PSC_TFSR_FAE (0x0080) -+#define MCF_PSC_TFSR_FRM(x) (((x)&0x000F)<<8) -+#define MCF_PSC_TFSR_TAG (0x1000) -+#define MCF_PSC_TFSR_TXW (0x4000) -+#define MCF_PSC_TFSR_IP (0x8000) -+#define MCF_PSC_TFSR_FRM_BYTE0 (0x0800) -+#define MCF_PSC_TFSR_FRM_BYTE1 (0x0400) -+#define MCF_PSC_TFSR_FRM_BYTE2 (0x0200) -+#define MCF_PSC_TFSR_FRM_BYTE3 (0x0100) -+ -+/* Bit definitions and macros for MCF_PSC_RFCR */ -+#define MCF_PSC_RFCR_CNTR(x) (((x)&0x0000FFFF)<<0) -+#define MCF_PSC_RFCR_TXW_MSK (0x00040000) -+#define MCF_PSC_RFCR_OF_MSK (0x00080000) -+#define MCF_PSC_RFCR_UF_MSK (0x00100000) -+#define MCF_PSC_RFCR_RXW_MSK (0x00200000) -+#define MCF_PSC_RFCR_FAE_MSK (0x00400000) -+#define MCF_PSC_RFCR_IP_MSK (0x00800000) -+#define MCF_PSC_RFCR_GR(x) (((x)&0x00000007)<<24) -+#define MCF_PSC_RFCR_FRMEN (0x08000000) -+#define MCF_PSC_RFCR_TIMER (0x10000000) -+#define MCF_PSC_RFCR_WRITETAG (0x20000000) -+#define MCF_PSC_RFCR_SHADOW (0x80000000) -+ -+/* Bit definitions and macros for MCF_PSC_TFCR */ -+#define MCF_PSC_TFCR_CNTR(x) (((x)&0x0000FFFF)<<0) -+#define MCF_PSC_TFCR_TXW_MSK (0x00040000) -+#define MCF_PSC_TFCR_OF_MSK (0x00080000) -+#define MCF_PSC_TFCR_UF_MSK (0x00100000) -+#define MCF_PSC_TFCR_RXW_MSK (0x00200000) -+#define MCF_PSC_TFCR_FAE_MSK (0x00400000) -+#define MCF_PSC_TFCR_IP_MSK (0x00800000) -+#define MCF_PSC_TFCR_GR(x) (((x)&0x00000007)<<24) -+#define MCF_PSC_TFCR_FRMEN (0x08000000) -+#define MCF_PSC_TFCR_TIMER (0x10000000) -+#define MCF_PSC_TFCR_WRITETAG (0x20000000) -+#define MCF_PSC_TFCR_SHADOW (0x80000000) -+ -+/* Bit definitions and macros for MCF_PSC_RFAR */ -+#define MCF_PSC_RFAR_ALARM(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_TFAR */ -+#define MCF_PSC_TFAR_ALARM(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_RFRP */ -+#define MCF_PSC_RFRP_READ(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_TFRP */ -+#define MCF_PSC_TFRP_READ(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_RFWP */ -+#define MCF_PSC_RFWP_WRITE(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_TFWP */ -+#define MCF_PSC_TFWP_WRITE(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_RLRFP */ -+#define MCF_PSC_RLRFP_LFP(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_TLRFP */ -+#define MCF_PSC_TLRFP_LFP(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_RLWFP */ -+#define MCF_PSC_RLWFP_LFP(x) (((x)&0x01FF)<<0) -+ -+/* Bit definitions and macros for MCF_PSC_TLWFP */ -+#define MCF_PSC_TLWFP_LFP(x) (((x)&0x01FF)<<0) -+ -+/********************************************************************/ -+ -+#endif /* __MCF548X_PSC_H__ */ ---- /dev/null -+++ b/include/asm-m68k/m5485sim.h -@@ -0,0 +1,221 @@ -+/* -+ * m5485sim.h -- ColdFire 547x/548x System Integration Unit support. -+ */ -+ -+#ifndef m5485sim_h -+#define m5485sim_h -+ -+ -+/* -+ * System Integration Unit Registers -+ */ -+#define MCF_SDRAMDS MCF_REG32(0x000004) /* SDRAM Drive Strength */ -+#define MCF_SBCR MCF_REG32(0x000010) /* System Breakpoint Control */ -+#define MCF_CSnCFG(x) MCF_REG32(0x000020+(x*4))/* SDRAM Chip Select X */ -+#define MCF_SECSACR MCF_REG32(0x000038) /* Sequential Access Control */ -+#define MCF_RSR MCF_REG32(0x000044) /* Reset Status */ -+#define MCF_JTAGID MCF_REG32(0x000050) /* JTAG Device Identification */ -+ -+/* -+ * FlexBus Chip Selects Registers -+ */ -+#define MCF_CSARn(x) MCF_REG32(0x000500+(x*0xC)) -+#define MCF_CSMRn(x) MCF_REG32(0x000504+(x*0xC)) -+#define MCF_CSCRn(x) MCF_REG32(0x000508+(x*0xC)) -+ -+/* -+ * Interrupt Controller Registers -+ */ -+#define MCF_IPRH MCF_REG32(0x000700) -+#define MCF_IPRL MCF_REG32(0x000704) -+#define MCF_IMRH MCF_REG32(0x000708) -+#define MCF_IMRL MCF_REG32(0x00070C) -+#define MCF_INTFRCH MCF_REG32(0x000710) -+#define MCF_INTFRCL MCF_REG32(0x000714) -+#define MCF_IRLR MCF_REG08(0x000718) -+#define MCF_IACKLPR MCF_REG08(0x000719) -+#define MCF_SWIACK MCF_REG08(0x0007E0) -+#define MCF_LnIACK(x) MCF_REG08(0x0007E4+((x)*0x004)) -+#define MCF_ICR(x) MCF_REG08(0x000740+((x)*0x001)) -+ -+/* -+ * Slice Timers Registers -+ */ -+#define MCF_SLTCNT(x) MCF_REG32(0x000900+((x)*0x010)) -+#define MCF_SCR(x) MCF_REG32(0x000904+((x)*0x010)) -+#define MCF_SCNT(x) MCF_REG32(0x000908+((x)*0x010)) -+#define MCF_SSR(x) MCF_REG32(0x00090C+((x)*0x010)) -+ -+/* -+ * Interrupt sources -+ */ -+#define ISC_EPORT_Fn(x) (x) /* EPORT Interrupts */ -+#define ISC_USB_EPn(x) (15+(x)) /* USB Endopint */ -+#define ISC_USB_ISR (22) /* USB General source */ -+#define ISC_USB_AISR (22) /* USB core source */ -+#define ISC_DSPI_OVRFW (25) /* DSPI overflow */ -+#define ISC_DSPI_RFOF (26) -+#define ISC_DSPI_RFDF (27) -+#define ISC_DSPI_TFUF (28) -+#define ISC_DSPI_TCF (29) -+#define ISC_DSPI_TFFF (30) -+#define ISC_DSPI_EOQF (31) -+#define ISC_PSCn(x) (35-(x)) -+#define ISC_COMM_TIM (36) -+#define ISC_SEC (37) -+#define ISC_FEC1 (38) -+#define ISC_FEC0 (39) -+#define ISC_I2C (40) -+#define ISC_PCI_ARB (41) -+#define ISC_PCI_CB (42) -+#define ISC_PCI_XLB (43) -+#define ISC_DMA (48) -+#define ISC_CANn_ERR(x) (49+(6*(x))) -+#define ISC_CANn_BUSOFF(x) (50+(6*(x))) -+#define ISC_CANn_MBOR(x) (51+(6*(x))) -+#define ISC_CAN0_WAKEIN (52) -+#define ISC_SLTn(x) (54-(x)) -+#define ISC_GPTn(x) (62-(x)) -+ -+/* -+ * Interrupt level and priorities -+ */ -+#define ILP_TOP (MCF_ICR_IL(5) | MCF_ICR_IP(3)) -+#define ILP_SLT0 (MCF_ICR_IL(5) | MCF_ICR_IP(2)) -+#define ILP_SLT1 (MCF_ICR_IL(5) | MCF_ICR_IP(1)) -+#define ILP_DMA (MCF_ICR_IL(5) | MCF_ICR_IP(0)) -+#define ILP_SEC (MCF_ICR_IL(4) | MCF_ICR_IP(7)) -+#define ILP_FEC0 (MCF_ICR_IL(4) | MCF_ICR_IP(6)) -+#define ILP_FEC1 (MCF_ICR_IL(4) | MCF_ICR_IP(5)) -+#define ILP_PCI_XLB (MCF_ICR_IL(4) | MCF_ICR_IP(4)) -+#define ILP_PCI_ARB (MCF_ICR_IL(4) | MCF_ICR_IP(3)) -+#define ILP_PCI_CB (MCF_ICR_IL(4) | MCF_ICR_IP(2)) -+#define ILP_I2C (MCF_ICR_IL(4) | MCF_ICR_IP(1)) -+ -+#define ILP_USB_EPn(x) (MCF_ICR_IL(3) | MCF_ICR_IP(7-(x))) -+#define ILP_USB_EP0 (MCF_ICR_IL(3) | MCF_ICR_IP(7)) -+#define ILP_USB_EP1 (MCF_ICR_IL(3) | MCF_ICR_IP(6)) -+#define ILP_USB_EP2 (MCF_ICR_IL(3) | MCF_ICR_IP(5)) -+#define ILP_USB_EP3 (MCF_ICR_IL(3) | MCF_ICR_IP(4)) -+#define ILP_USB_EP4 (MCF_ICR_IL(3) | MCF_ICR_IP(3)) -+#define ILP_USB_EP5 (MCF_ICR_IL(3) | MCF_ICR_IP(2)) -+#define ILP_USB_EP6 (MCF_ICR_IL(3) | MCF_ICR_IP(1)) -+#define ILP_USB_ISR (MCF_ICR_IL(3) | MCF_ICR_IP(0)) -+ -+#define ILP_USB_AISR (MCF_ICR_IL(2) | MCF_ICR_IP(7)) -+#define ILP_DSPI_OVRFW (MCF_ICR_IL(2) | MCF_ICR_IP(6)) -+#define ILP_DSPI_RFOF (MCF_ICR_IL(2) | MCF_ICR_IP(5)) -+#define ILP_DSPI_RFDF (MCF_ICR_IL(2) | MCF_ICR_IP(4)) -+#define ILP_DSPI_TFUF (MCF_ICR_IL(2) | MCF_ICR_IP(3)) -+#define ILP_DSPI_TCF (MCF_ICR_IL(2) | MCF_ICR_IP(2)) -+#define ILP_DSPI_TFFF (MCF_ICR_IL(2) | MCF_ICR_IP(1)) -+#define ILP_DSPI_EOQF (MCF_ICR_IL(2) | MCF_ICR_IP(0)) -+ -+#define ILP_COMM_TIM (MCF_ICR_IL(1) | MCF_ICR_IP(7)) -+#define ILP_PSCn(x) (MCF_ICR_IL(1) | MCF_ICR_IP(3-((x)&3))) -+#define ILP_PSC0 (MCF_ICR_IL(1) | MCF_ICR_IP(3)) -+#define ILP_PSC1 (MCF_ICR_IL(1) | MCF_ICR_IP(2)) -+#define ILP_PSC2 (MCF_ICR_IL(1) | MCF_ICR_IP(1)) -+#define ILP_PSC3 (MCF_ICR_IL(1) | MCF_ICR_IP(0)) -+ -+ -+ -+ -+ -+/********************************************************************/ -+ -+/* -+ * System Integration Unit Bitfields -+ */ -+ -+/* SBCR */ -+#define MCF_SBCR_PIN2DSPI (0x08000000) -+#define MCF_SBCR_DMA2CPU (0x10000000) -+#define MCF_SBCR_CPU2DMA (0x20000000) -+#define MCF_SBCR_PIN2DMA (0x40000000) -+#define MCF_SBCR_PIN2CPU (0x80000000) -+ -+/* SECSACR */ -+#define MCF_SECSACR_SEQEN (0x00000001) -+ -+/* RSR */ -+#define MCF_RSR_RST (0x00000001) -+#define MCF_RSR_RSTWD (0x00000002) -+#define MCF_RSR_RSTJTG (0x00000008) -+ -+/* JTAGID */ -+#define MCF_JTAGID_REV (0xF0000000) -+#define MCF_JTAGID_PROCESSOR (0x0FFFFFFF) -+#define MCF_JTAGID_MCF5485 (0x0800C01D) -+#define MCF_JTAGID_MCF5484 (0x0800D01D) -+#define MCF_JTAGID_MCF5483 (0x0800E01D) -+#define MCF_JTAGID_MCF5482 (0x0800F01D) -+#define MCF_JTAGID_MCF5481 (0x0801001D) -+#define MCF_JTAGID_MCF5480 (0x0801101D) -+#define MCF_JTAGID_MCF5475 (0x0801201D) -+#define MCF_JTAGID_MCF5474 (0x0801301D) -+#define MCF_JTAGID_MCF5473 (0x0801401D) -+#define MCF_JTAGID_MCF5472 (0x0801501D) -+#define MCF_JTAGID_MCF5471 (0x0801601D) -+#define MCF_JTAGID_MCF5470 (0x0801701D) -+ -+ -+/* -+ * Interrupt Controller Bitfields -+ */ -+#define MCF_IRLR_IRQ(x) (((x)&0x7F)<<1) -+#define MCF_IACKLPR_PRI(x) (((x)&0x0F)<<0) -+#define MCF_IACKLPR_LEVEL(x) (((x)&0x07)<<4) -+#define MCF_ICR_IP(x) (((x)&0x07)<<0) -+#define MCF_ICR_IL(x) (((x)&0x07)<<3) -+ -+/* -+ * Slice Timers Bitfields -+ */ -+#define MCF_SCR_TEN (0x01000000) -+#define MCF_SCR_IEN (0x02000000) -+#define MCF_SCR_RUN (0x04000000) -+#define MCF_SSR_ST (0x01000000) -+#define MCF_SSR_BE (0x02000000) -+ -+ -+/* -+ * Some needed coldfire registers -+ */ -+#define MCF_PAR_PCIBG MCF_REG16(0x000A48) -+#define MCF_PAR_PCIBR MCF_REG16(0x000A4A) -+#define MCF_PAR_PSCn(x) MCF_REG08(0x000A4F-((x)&0x3)) -+#define MCF_PAR_FECI2CIRQ MCF_REG16(0x000A44) -+#define MCF_PAR_DSPI MCF_REG16(0x000A50) -+#define MCF_PAR_TIMER MCF_REG08(0X000A52) -+#define MCF_EPPAR MCF_REG16(0x000F00) -+#define MCF_EPIER MCF_REG08(0x000F05) -+#define MCF_EPFR MCF_REG08(0x000F0C) -+ -+/* -+ * Some GPIO bitfields -+ */ -+#define MCF_PAR_SDA (0x0008) -+#define MCF_PAR_SCL (0x0004) -+#define MCF_PAR_PSC_TXD (0x04) -+#define MCF_PAR_PSC_RXD (0x08) -+#define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4) -+#define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6) -+#define MCF_PAR_PSC_CTS_GPIO (0x00) -+#define MCF_PAR_PSC_CTS_BCLK (0x80) -+#define MCF_PAR_PSC_CTS_CTS (0xC0) -+#define MCF_PAR_PSC_RTS_GPIO (0x00) -+#define MCF_PAR_PSC_RTS_FSYNC (0x20) -+#define MCF_PAR_PSC_RTS_RTS (0x30) -+#define MCF_PAR_PSC_CANRX (0x40) -+ -+ -+/* -+ * Some used coldfire values -+ */ -+#define MCF_EPIER_EPIE(x) (0x01 << (x)) -+#define MCF_EPPAR_EPPAx_FALLING (2) -+#define MCF_EPPAR_EPPA(n,x) (((x)&0x0003) << (2*n)) -+ -+ -+#endif /* m5485sim_h */ ---- /dev/null -+++ b/include/asm-m68k/m5485sram.h -@@ -0,0 +1,12 @@ -+#ifndef SYS_SRAM_H -+#define SYS_SRAM_H -+ -+ -+#define SYS_SRAM_DMA_START MCF_MBAR + 0x10000 -+#define SYS_SRAM_DMA_SIZE 8192 -+#define SYS_SRAM_FEC_START SYS_SRAM_DMA_START + SYS_SRAM_DMA_SIZE -+#define SYS_SRAM_FEC_SIZE 2048 -+#define SYS_SRAM_SEC_START SYS_SRAM_FEC_START + SYS_SRAM_FEC_SIZE -+#define SYS_SRAM_SEC_SIZE 1280 -+ -+#endif /* SYS_SRAM_H */ ---- a/include/asm-m68k/machdep.h -+++ b/include/asm-m68k/machdep.h -@@ -32,4 +32,11 @@ extern void (*mach_heartbeat) (int); - extern void (*mach_l2_flush) (int); - extern void (*mach_beep) (unsigned int, unsigned int); - -+#ifdef CONFIG_COLDFIRE -+extern void __init config_coldfire(void); -+extern void __init mmu_context_init(void); -+extern irq_handler_t mach_default_handler; -+extern void (*mach_tick)(void); -+#endif -+ - #endif /* _M68K_MACHDEP_H */ ---- /dev/null -+++ b/include/asm-m68k/MCD_dma.h -@@ -0,0 +1,408 @@ -+/********************************************************************* -+ * -+ * Copyright (C) 2004 Motorola, Inc. -+ * MOTOROLA, INC. All Rights Reserved. -+ * You are hereby granted a copyright license to use -+ * the SOFTWARE so long as this entire notice is -+ * retained without alteration in any modified and/or redistributed -+ * versions, and that such modified versions are clearly identified -+ * as such. No licenses are granted by implication, estoppel or -+ * otherwise under any patents or trademarks of Motorola, Inc. This -+ * software is provided on an "AS IS" basis and without warranty. -+ * -+ * To the maximum extent permitted by applicable law, MOTOROLA -+ * DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING -+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR -+ * PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE -+ * SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY -+ * ACCOMPANYING WRITTEN MATERIALS. -+ * -+ * To the maximum extent permitted by applicable law, IN NO EVENT -+ * SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING -+ * WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS -+ * INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY -+ * LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. -+ * -+ * Motorola assumes no responsibility for the maintenance and support -+ * of this software -+ ********************************************************************/ -+ -+/* -+ * File: MCD_dma.h -+ * Purpose: Main header file for multi-channel DMA API. -+ * -+ * Notes: -+ * -+ * Modifications: -+ */ -+#ifndef _MCD_API_H -+#define _MCD_API_H -+ -+#include <asm/types.h> -+ -+/* -+ * Turn Execution Unit tasks ON (#define) or OFF (#undef) -+ */ -+#undef MCD_INCLUDE_EU -+ -+/* -+ * Number of DMA channels -+ */ -+#define NCHANNELS 16 -+ -+/* -+ * Total number of variants -+ */ -+#ifdef MCD_INCLUDE_EU -+#define NUMOFVARIANTS 6 -+#else -+#define NUMOFVARIANTS 4 -+#endif -+ -+/* -+ * Define sizes of the various tables -+ */ -+#define TASK_TABLE_SIZE (NCHANNELS*32) -+#define VAR_TAB_SIZE (128) -+#define CONTEXT_SAVE_SIZE (128) -+#define FUNCDESC_TAB_SIZE (256) -+ -+#ifdef MCD_INCLUDE_EU -+#define FUNCDESC_TAB_NUM 16 -+#else -+#define FUNCDESC_TAB_NUM 1 -+#endif -+ -+ -+#ifndef DEFINESONLY -+ -+/* -+ * Portability typedefs -+ */ -+ /* -+#ifndef s32 -+typedef int s32; -+#endif -+#ifndef u32 -+typedef unsigned int u32; -+#endif -+#ifndef s16 -+typedef short s16; -+#endif -+#ifndef u16 -+typedef unsigned short u16; -+#endif -+#ifndef s8 -+typedef char s8; -+#endif -+#ifndef u8 -+typedef unsigned char u8; -+#endif -+*/ -+/* -+ * These structures represent the internal registers of the -+ * multi-channel DMA -+ */ -+struct dmaRegs_s { -+ u32 taskbar; /* task table base address register */ -+ u32 currPtr; -+ u32 endPtr; -+ u32 varTablePtr; -+ u16 dma_rsvd0; -+ u16 ptdControl; /* ptd control */ -+ u32 intPending; /* interrupt pending register */ -+ u32 intMask; /* interrupt mask register */ -+ u16 taskControl[16]; /* task control registers */ -+ u8 priority[32]; /* priority registers */ -+ u32 initiatorMux; /* initiator mux control */ -+ u32 taskSize0; /* task size control register 0. */ -+ u32 taskSize1; /* task size control register 1. */ -+ u32 dma_rsvd1; /* reserved */ -+ u32 dma_rsvd2; /* reserved */ -+ u32 debugComp1; /* debug comparator 1 */ -+ u32 debugComp2; /* debug comparator 2 */ -+ u32 debugControl; /* debug control */ -+ u32 debugStatus; /* debug status */ -+ u32 ptdDebug; /* priority task decode debug */ -+ u32 dma_rsvd3[31]; /* reserved */ -+}; -+typedef volatile struct dmaRegs_s dmaRegs; -+ -+#endif -+ -+/* -+ * PTD contrl reg bits -+ */ -+#define PTD_CTL_TSK_PRI 0x8000 -+#define PTD_CTL_COMM_PREFETCH 0x0001 -+ -+/* -+ * Task Control reg bits and field masks -+ */ -+#define TASK_CTL_EN 0x8000 -+#define TASK_CTL_VALID 0x4000 -+#define TASK_CTL_ALWAYS 0x2000 -+#define TASK_CTL_INIT_MASK 0x1f00 -+#define TASK_CTL_ASTRT 0x0080 -+#define TASK_CTL_HIPRITSKEN 0x0040 -+#define TASK_CTL_HLDINITNUM 0x0020 -+#define TASK_CTL_ASTSKNUM_MASK 0x000f -+ -+/* -+ * Priority reg bits and field masks -+ */ -+#define PRIORITY_HLD 0x80 -+#define PRIORITY_PRI_MASK 0x07 -+ -+/* -+ * Debug Control reg bits and field masks -+ */ -+#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000 -+#define DBG_CTL_AUTO_ARM 0x00008000 -+#define DBG_CTL_BREAK 0x00004000 -+#define DBG_CTL_COMP1_TYP_MASK 0x00003800 -+#define DBG_CTL_COMP2_TYP_MASK 0x00000070 -+#define DBG_CTL_EXT_BREAK 0x00000004 -+#define DBG_CTL_INT_BREAK 0x00000002 -+ -+/* -+ * PTD Debug reg selector addresses -+ * This reg must be written with a value to show the contents of -+ * one of the desired internal register. -+ */ -+#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */ -+#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and -+ have initiators asserted */ -+ -+ -+/* -+ * General return values -+ */ -+#define MCD_OK 0 -+#define MCD_ERROR -1 -+#define MCD_TABLE_UNALIGNED -2 -+#define MCD_CHANNEL_INVALID -3 -+ -+/* -+ * MCD_initDma input flags -+ */ -+#define MCD_RELOC_TASKS 0x00000001 -+#define MCD_NO_RELOC_TASKS 0x00000000 -+#define MCD_COMM_PREFETCH_EN 0x00000002 /* Commbus Prefetching - MCF547x/548x ONLY */ -+ -+/* -+ * MCD_dmaStatus Status Values for each channel -+ */ -+#define MCD_NO_DMA 1 /* No DMA has been requested since reset */ -+#define MCD_IDLE 2 /* DMA active, but the initiator is currently inactive */ -+#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */ -+#define MCD_PAUSED 4 /* DMA active but it is currently paused */ -+#define MCD_HALTED 5 /* the most recent DMA has been killed with MCD_killTask() */ -+#define MCD_DONE 6 /* the most recent DMA has completed. */ -+ -+ -+/* -+ * MCD_startDma parameter defines -+ */ -+ -+/* -+ * Constants for the funcDesc parameter -+ */ -+/* Byte swapping: */ -+#define MCD_NO_BYTE_SWAP 0x00045670 /* to disable byte swapping. */ -+#define MCD_BYTE_REVERSE 0x00076540 /* to reverse the bytes of each u32 of the DMAed data. */ -+#define MCD_U16_REVERSE 0x00067450 /* to reverse the 16-bit halves of -+ each 32-bit data value being DMAed.*/ -+#define MCD_U16_BYTE_REVERSE 0x00054760 /* to reverse the byte halves of each -+ 16-bit half of each 32-bit data value DMAed */ -+#define MCD_NO_BIT_REV 0x00000000 /* do not reverse the bits of each byte DMAed. */ -+#define MCD_BIT_REV 0x00088880 /* reverse the bits of each byte DMAed */ -+/* CRCing: */ -+#define MCD_CRC16 0xc0100000 /* to perform CRC-16 on DMAed data. */ -+#define MCD_CRCCCITT 0xc0200000 /* to perform CRC-CCITT on DMAed data. */ -+#define MCD_CRC32 0xc0300000 /* to perform CRC-32 on DMAed data. */ -+#define MCD_CSUMINET 0xc0400000 /* to perform internet checksums on DMAed data.*/ -+#define MCD_NO_CSUM 0xa0000000 /* to perform no checksumming. */ -+ -+#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM) -+#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM) -+ -+/* -+ * Constants for the flags parameter -+ */ -+#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */ -+#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */ -+#define MCD_TT_FLAGS_SP 0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY */ -+#define MCD_TT_FLAGS_MASK 0x000000ff -+#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW) -+ -+#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */ -+#define MCD_CHAIN_DMA /* TBD */ -+#define MCD_EU_DMA /* TBD */ -+#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */ -+#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */ -+ -+ -+/* these flags are valid for MCD_startDma and the chained buffer descriptors */ -+#define MCD_BUF_READY 0x80000000 /* indicates that this buffer is now under the DMA's control */ -+#define MCD_WRAP 0x20000000 /* to tell the FEC Dmas to wrap to the first BD */ -+#define MCD_INTERRUPT 0x10000000 /* to generate an interrupt after completion of the DMA. */ -+#define MCD_END_FRAME 0x08000000 /* tell the DMA to end the frame when transferring -+ last byte of data in buffer */ -+#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum -+ prior to performing the DMA. */ -+ -+/* Defines for the FEC buffer descriptor control/status word*/ -+#define MCD_FEC_BUF_READY 0x8000 -+#define MCD_FEC_WRAP 0x2000 -+#define MCD_FEC_INTERRUPT 0x1000 -+#define MCD_FEC_END_FRAME 0x0800 -+ -+ -+/* -+ * Defines for general intuitiveness -+ */ -+ -+#define MCD_TRUE 1 -+#define MCD_FALSE 0 -+ -+/* -+ * Three different cases for destination and source. -+ */ -+#define MINUS1 -1 -+#define ZERO 0 -+#define PLUS1 1 -+ -+#ifndef DEFINESONLY -+ -+/* Task Table Entry struct*/ -+typedef struct { -+ u32 TDTstart; /* task descriptor table start */ -+ u32 TDTend; /* task descriptor table end */ -+ u32 varTab; /* variable table start */ -+ u32 FDTandFlags; /* function descriptor table start and flags */ -+ volatile u32 descAddrAndStatus; -+ volatile u32 modifiedVarTab; -+ u32 contextSaveSpace; /* context save space start */ -+ u32 literalBases; -+} TaskTableEntry; -+ -+ -+/* Chained buffer descriptor */ -+typedef volatile struct MCD_bufDesc_struct MCD_bufDesc; -+struct MCD_bufDesc_struct { -+ u32 flags; /* flags describing the DMA */ -+ u32 csumResult; /* checksum from checksumming performed since last checksum reset */ -+ s8 *srcAddr; /* the address to move data from */ -+ s8 *destAddr; /* the address to move data to */ -+ s8 *lastDestAddr; /* the last address written to */ -+ u32 dmaSize; /* the number of bytes to transfer independent of the transfer size */ -+ MCD_bufDesc *next; /* next buffer descriptor in chain */ -+ u32 info; /* private information about this descriptor; DMA does not affect it */ -+}; -+ -+/* Progress Query struct */ -+typedef volatile struct MCD_XferProg_struct { -+ s8 *lastSrcAddr; /* the most-recent or last, post-increment source address */ -+ s8 *lastDestAddr; /* the most-recent or last, post-increment destination address */ -+ u32 dmaSize; /* the amount of data transferred for the current buffer */ -+ MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */ -+} MCD_XferProg; -+ -+ -+/* FEC buffer descriptor */ -+typedef volatile struct MCD_bufDescFec_struct { -+ u16 statCtrl; -+ u16 length; -+ u32 dataPointer; -+} MCD_bufDescFec; -+ -+ -+/*************************************************************************/ -+/* -+ * API function Prototypes - see MCD_dmaApi.c for further notes -+ */ -+ -+/* -+ * MCD_startDma starts a particular kind of DMA . -+ */ -+int MCD_startDma ( -+ int channel, /* the channel on which to run the DMA */ -+ s8 *srcAddr, /* the address to move data from, or buffer-descriptor address */ -+ s16 srcIncr, /* the amount to increment the source address per transfer */ -+ s8 *destAddr, /* the address to move data to */ -+ s16 destIncr, /* the amount to increment the destination address per transfer */ -+ u32 dmaSize, /* the number of bytes to transfer independent of the transfer size */ -+ u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */ -+ u32 initiator, /* what device initiates the DMA */ -+ int priority, /* priority of the DMA */ -+ u32 flags, /* flags describing the DMA */ -+ u32 funcDesc /* a description of byte swapping, bit swapping, and CRC actions */ -+); -+ -+/* -+ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA -+ * registers, relocating and creating the appropriate task structures, and -+ * setting up some global settings -+ */ -+int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags); -+ -+/* -+ * MCD_dmaStatus() returns the status of the DMA on the requested channel. -+ */ -+int MCD_dmaStatus (int channel); -+ -+/* -+ * MCD_XferProgrQuery() returns progress of DMA on requested channel -+ */ -+int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep); -+ -+/* -+ * MCD_killDma() halts the DMA on the requested channel, without any -+ * intention of resuming the DMA. -+ */ -+int MCD_killDma (int channel); -+ -+/* -+ * MCD_continDma() continues a DMA which as stopped due to encountering an -+ * unready buffer descriptor. -+ */ -+int MCD_continDma (int channel); -+ -+/* -+ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is -+ * running on that channel). -+ */ -+int MCD_pauseDma (int channel); -+ -+/* -+ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is -+ * running on that channel). -+ */ -+int MCD_resumeDma (int channel); -+ -+/* -+ * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA -+ */ -+int MCD_csumQuery (int channel, u32 *csum); -+ -+/* -+ * MCD_getCodeSize provides the packed size required by the microcoded task -+ * and structures. -+ */ -+int MCD_getCodeSize(void); -+ -+/* -+ * MCD_getVersion provides a pointer to a version string and returns a -+ * version number. -+ */ -+int MCD_getVersion(char **longVersion); -+ -+/* macro for setting a location in the variable table */ -+#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value -+ /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function, -+ so I'm avoiding surrounding it with "do {} while(0)" */ -+ -+#endif /* DEFINESONLY */ -+ -+#endif /* _MCD_API_H */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_ccm.h -@@ -0,0 +1,163 @@ -+/* -+ * Matt Waddel Matt.Waddel@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_CCM_H__ -+#define __MCF5445X_CCM_H__ -+ -+/********************************************************************* -+* -+* Chip Configuration Module (CCM) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_CCM_CCR MCF_REG16(0xFC0A0004) /* Chip Configuration Register (Read-only) (256 or 360 TEPBGA) */ -+#define MCF_CCM_RCON MCF_REG16(0xFC0A0008) /* Reset Configuration (Read-only) (256 or 360 TEPBGA) */ -+#define MCF_CCM_CIR MCF_REG16(0xFC0A000A) /* Chip Identification Register (Read-only) */ -+#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) /* Miscellaneous Control Register */ -+#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) /* Clock Divider Register */ -+#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0014) /* USB On-the-Go Controller Status Register */ -+#define MCF_CCM_SBFSR MCF_REG16(0xFC0A0018) /* Serial Boot Facility Status Register (Read Only) */ -+#define MCF_CCM_SBFCR MCF_REG16(0xFC0A0020) /* Serial Boot Facility Control Register */ -+ -+/* Bit definitions and macros for CCR_360 */ -+#define MCF_CCM_CCR_360_PLLMULT2(x) (((x) & 0x0003)) /* 2-Bit PLL clock mode */ -+#define MCF_CCM_CCR_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ -+#define MCF_CCM_CCR_360_PCIMODE (0x0008) /* PCI host/agent mode */ -+#define MCF_CCM_CCR_360_PLLMODE (0x0010) /* PLL Mode */ -+#define MCF_CCM_CCR_360_FBCONFIG(x) (((x) & 0x0007) << 5) /* Flexbus/PCI port size configuration */ -+#define MCF_CCM_CCR_360_PLLMULT3(x) (((x) & 0x0007)) /* 3-Bit PLL Clock Mode */ -+#define MCF_CCM_CCR_360_OSCMODE (0x0008) /* Oscillator Clock Mode */ -+#define MCF_CCM_CCR_360_FBCONFIG_MASK (0x00E0) -+#define MCF_CCM_CCR_360_PLLMULT2_MASK (0x0003) -+#define MCF_CCM_CCR_360_PLLMULT3_MASK (0x0007) -+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_32 (0x0000) -+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_8 (0x0020) -+#define MCF_CCM_CCR_360_FBCONFIG_NM_NP_16 (0x0040) -+#define MCF_CCM_CCR_360_FBCONFIG_M_P_16 (0x0060) -+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_32 (0x0080) -+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_8 (0x00A0) -+#define MCF_CCM_CCR_360_FBCONFIG_M_NP_16 (0x00C0) -+#define MCF_CCM_CCR_360_FBCONFIG_M_P_8 (0x00E0) -+#define MCF_CCM_CCR_360_PLLMULT2_12X (0x0000) -+#define MCF_CCM_CCR_360_PLLMULT2_6X (0x0001) -+#define MCF_CCM_CCR_360_PLLMULT2_16X (0x0002) -+#define MCF_CCM_CCR_360_PLLMULT2_8X (0x0003) -+#define MCF_CCM_CCR_360_PLLMULT3_20X (0x0000) -+#define MCF_CCM_CCR_360_PLLMULT3_10X (0x0001) -+#define MCF_CCM_CCR_360_PLLMULT3_24X (0x0002) -+#define MCF_CCM_CCR_360_PLLMULT3_18X (0x0003) -+#define MCF_CCM_CCR_360_PLLMULT3_12X (0x0004) -+#define MCF_CCM_CCR_360_PLLMULT3_6X (0x0005) -+#define MCF_CCM_CCR_360_PLLMULT3_16X (0x0006) -+#define MCF_CCM_CCR_360_PLLMULT3_8X (0x0007) -+ -+/* Bit definitions and macros for CCR_256 */ -+#define MCF_CCM_CCR_256_PLLMULT3(x) (((x) & 0x0007)) /* 3-Bit PLL clock mode */ -+#define MCF_CCM_CCR_256_OSCMODE (0x0008) /* Oscillator clock mode */ -+#define MCF_CCM_CCR_256_PLLMODE (0x0010) /* PLL Mode */ -+#define MCF_CCM_CCR_256_FBCONFIG(x) (((x) & 0x0007) << 5) /* Flexbus/PCI port size configuration */ -+#define MCF_CCM_CCR_256_FBCONFIG_MASK (0x00E0) -+#define MCF_CCM_CCR_256_FBCONFIG_NM_32 (0x0000) -+#define MCF_CCM_CCR_256_FBCONFIG_NM_8 (0x0020) -+#define MCF_CCM_CCR_256_FBCONFIG_NM_16 (0x0040) -+#define MCF_CCM_CCR_256_FBCONFIG_M_32 (0x0080) -+#define MCF_CCM_CCR_256_FBCONFIG_M_8 (0x00A0) -+#define MCF_CCM_CCR_256_FBCONFIG_M_16 (0x00C0) -+#define MCF_CCM_CCR_256_PLLMULT3_MASK (0x0007) -+#define MCF_CCM_CCR_256_PLLMULT3_20X (0x0000) -+#define MCF_CCM_CCR_256_PLLMULT3_10X (0x0001) -+#define MCF_CCM_CCR_256_PLLMULT3_24X (0x0002) -+#define MCF_CCM_CCR_256_PLLMULT3_18X (0x0003) -+#define MCF_CCM_CCR_256_PLLMULT3_12X (0x0004) -+#define MCF_CCM_CCR_256_PLLMULT3_6X (0x0005) -+#define MCF_CCM_CCR_256_PLLMULT3_16X (0x0006) -+#define MCF_CCM_CCR_256_PLLMULT3_8X (0x0007) -+ -+/* Bit definitions and macros for RCON_360 */ -+#define MCF_CCM_RCON_360_PLLMULT(x) (((x)&0x0003)) /* PLL clock mode */ -+#define MCF_CCM_RCON_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ -+#define MCF_CCM_RCON_360_PCIMODE (0x0008) /* PCI host/agent mode */ -+#define MCF_CCM_RCON_360_PLLMODE (0x0010) /* PLL Mode */ -+#define MCF_CCM_RCON_360_FBCONFIG(x) (((x) & 0x0007) << 5) /* Flexbus/PCI port size configuration */ -+ -+/* Bit definitions and macros for RCON_256 */ -+#define MCF_CCM_RCON_256_PLLMULT(x) (((x) & 0x0007)) /* PLL clock mode */ -+#define MCF_CCM_RCON_256_OSCMODE (0x0008) /* Oscillator clock mode */ -+#define MCF_CCM_RCON_256_PLLMODE (0x0010) /* PLL Mode */ -+#define MCF_CCM_RCON_256_FBCONFIG(x) (((x) & 0x0007) << 5) /* Flexbus/PCI port size configuration */ -+ -+/* Bit definitions and macros for CIR */ -+#define MCF_CCM_CIR_PRN(x) (((x) & 0x003F)) /* Part revision number */ -+#define MCF_CCM_CIR_PIN(x) (((x) & 0x03FF) << 6) /* Part identification number */ -+#define MCF_CCM_CIR_PIN_MASK (0xFFC0) -+#define MCF_CCM_CIR_PRN_MASK (0x003F) -+#define MCF_CCM_CIR_PIN_MCF54450 (0x4F << 6) -+#define MCF_CCM_CIR_PIN_MCF54451 (0x4D << 6) -+#define MCF_CCM_CIR_PIN_MCF54452 (0x4B << 6) -+#define MCF_CCM_CIR_PIN_MCF54453 (0x49 << 6) -+#define MCF_CCM_CIR_PIN_MCF54454 (0x4A << 6) -+#define MCF_CCM_CIR_PIN_MCF54455 (0x48 << 6) -+ -+/* Bit definitions and macros for MISCCR */ -+#define MCF_CCM_MISCCR_USBSRC (0x0001) /* USB clock source */ -+#define MCF_CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense polarity */ -+#define MCF_CCM_MISCCR_USBPUE (0x0004) /* USB transceiver pull-up enable */ -+#define MCF_CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */ -+#define MCF_CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */ -+#define MCF_CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */ -+#define MCF_CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */ -+#define MCF_CCM_MISCCR_BMT(x) (((x) & 0x0007) << 8) /* Bus monitor timing field */ -+#define MCF_CCM_MISCCR_BME (0x0800) /* Bus monitor external enable bit */ -+#define MCF_CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */ -+#define MCF_CCM_MISCCR_BMT_65536 (0 << 8) -+#define MCF_CCM_MISCCR_BMT_32768 (1 << 8) -+#define MCF_CCM_MISCCR_BMT_16384 (2 << 8) -+#define MCF_CCM_MISCCR_BMT_8192 (3 << 8) -+#define MCF_CCM_MISCCR_BMT_4096 (4 << 8) -+#define MCF_CCM_MISCCR_BMT_2048 (5 << 8) -+#define MCF_CCM_MISCCR_BMT_1024 (6 << 8) -+#define MCF_CCM_MISCCR_BMT_512 (7 << 8) -+#define MCF_CCM_MISCCR_SSIPUE_UP (1 << 7) -+#define MCF_CCM_MISCCR_SSIPUE_DOWN (0 << 7) -+#define MCF_CCM_MISCCR_SSIPUS_UP (1 << 6) -+#define MCF_CCM_MISCCR_SSIPUS_DOWN (0 << 6) -+#define MCF_CCM_MISCCR_TIMDMA_TIM (1 << 5) -+#define MCF_CCM_MISCCR_TIMDMA_SSI (0 << 5) -+#define MCF_CCM_MISCCR_SSISRC_CLKIN (0 << 4) -+#define MCF_CCM_MISCCR_SSISRC_PLL (1 << 4) -+#define MCF_CCM_MISCCR_USBOC_ACTHI (0 << 1) -+#define MCF_CCM_MISCCR_USBOC_ACTLO (1 << 1) -+#define MCF_CCM_MISCCR_USBSRC_CLKIN (0) -+#define MCF_CCM_MISCCR_USBSRC_PLL (1) -+ -+/* Bit definitions and macros for CDR */ -+#define MCF_CCM_CDR_SSIDIV(x) (((x) & 0x00FF)) /* SSI oversampling clock divider */ -+#define MCF_CCM_CDR_LPDIV(x) (((x) & 0x000F) << 8) /* Low power clock divider */ -+ -+/* Bit definitions and macros for UOCSR */ -+#define MCF_CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down enable */ -+#define MCF_CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt enable */ -+#define MCF_CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */ -+#define MCF_CCM_UOCSR_PWRFLT (0x0008) /* VBUS power fault */ -+#define MCF_CCM_UOCSR_SEND (0x0010) /* Session end */ -+#define MCF_CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */ -+#define MCF_CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */ -+#define MCF_CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */ -+#define MCF_CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (read-only) */ -+#define MCF_CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor enabled (read-only) */ -+#define MCF_CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (read-only) */ -+#define MCF_CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (read-only) */ -+#define MCF_CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (read-only) */ -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_CCM_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_dspi.h -@@ -0,0 +1,402 @@ -+/* -+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_DSPI_H__ -+#define __MCF5445X_DSPI_H__ -+ -+/********************************************************************* -+* -+* DMA Serial Peripheral Interface (DSPI) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_DSPI_DMCR MCF_REG32(0xFC05C000) /* DSPI Module Configuration Register */ -+#define MCF_DSPI_DTCR MCF_REG32(0xFC05C008) /* DSPI Transfer Count Register */ -+#define MCF_DSPI_DCTAR0 MCF_REG32(0xFC05C00C) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DCTAR1 MCF_REG32(0xFC05C010) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DCTAR2 MCF_REG32(0xFC05C014) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DCTAR3 MCF_REG32(0xFC05C018) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DCTAR4 MCF_REG32(0xFC05C01C) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DCTAR5 MCF_REG32(0xFC05C020) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DCTAR6 MCF_REG32(0xFC05C024) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DCTAR7 MCF_REG32(0xFC05C028) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DSR MCF_REG32(0xFC05C02C) /* DSPI Status Register */ -+#define MCF_DSPI_DRSER MCF_REG32(0xFC05C030) /* DSPI DMA/Interrupt Request Select and Enable Register */ -+#define MCF_DSPI_DTFR MCF_REG32(0xFC05C034) /* DSPI Transmit FIFO Register */ -+#define MCF_DSPI_DRFR MCF_REG32(0xFC05C038) /* DSPI Receive FIFO Register */ -+#define MCF_DSPI_DTFDR0 MCF_REG32(0xFC05C03C) /* DSPI Transmit FIFO Debugging Registers */ -+#define MCF_DSPI_DTFDR1 MCF_REG32(0xFC05C040) /* DSPI Transmit FIFO Debugging Registers */ -+#define MCF_DSPI_DTFDR2 MCF_REG32(0xFC05C044) /* DSPI Transmit FIFO Debugging Registers */ -+#define MCF_DSPI_DTFDR3 MCF_REG32(0xFC05C048) /* DSPI Transmit FIFO Debugging Registers */ -+#define MCF_DSPI_DRFDR0 MCF_REG32(0xFC05C07C) /* DSPI Receive FIFO Debugging Registers */ -+#define MCF_DSPI_DRFDR1 MCF_REG32(0xFC05C080) /* DSPI Receive FIFO Debugging Registers */ -+#define MCF_DSPI_DRFDR2 MCF_REG32(0xFC05C084) /* DSPI Receive FIFO Debugging Registers */ -+#define MCF_DSPI_DRFDR3 MCF_REG32(0xFC05C088) /* DSPI Receive FIFO Debugging Registers */ -+ -+/* Parameterized register read/write macros for multiple registers */ -+#define MCF_DSPI_DCTAR(x) MCF_REG32(0xFC05C00C+((x)*0x004)) /* DSPI Clock and Transfer Attributes Register */ -+#define MCF_DSPI_DTFDR(x) MCF_REG32(0xFC05C03C+((x)*0x004)) /* DSPI Transmit FIFO Debugging Registers */ -+#define MCF_DSPI_DRFDR(x) MCF_REG32(0xFC05C07C+((x)*0x004)) /* DSPI Receive FIFO Debugging Registers */ -+ -+/* Bit definitions and macros for DMCR */ -+#define MCF_DSPI_DMCR_HALT (0x00000001) /* Halt -- stops and starts DSPI transfers */ -+#define MCF_DSPI_DMCR_SMPLPT(x) (((x)&0x00000003)<<8) /* Sample point selection */ -+#define MCF_DSPI_DMCR_CLRRXF (0x00000400) /* Clear receive FIFO */ -+#define MCF_DSPI_DMCR_CLRTXF (0x00000800) /* Clear transmit FIFO */ -+#define MCF_DSPI_DMCR_DISRXF (0x00001000) /* Disable receive FIFO */ -+#define MCF_DSPI_DMCR_DISTXF (0x00002000) /* Disable transmit FIFO */ -+#define MCF_DSPI_DMCR_MDIS (0x00004000) /* Module Disable */ -+#define MCF_DSPI_DMCR_PCSIS0 (0x00010000) /* Peripheral chip-select 0 inactive state */ -+#define MCF_DSPI_DMCR_PCSIS1 (0x00020000) /* Peripheral chip-select 1 inactive state */ -+#define MCF_DSPI_DMCR_PCSIS2 (0x00040000) /* Peripheral chip-select 2 inactive state */ -+#define MCF_DSPI_DMCR_PCSIS3 (0x00080000) /* Peripheral chip-select 3 inactive state */ -+#define MCF_DSPI_DMCR_PCSIS4 (0x00100000) /* Peripheral chip-select 4 inactive state */ -+#define MCF_DSPI_DMCR_PCSIS5 (0x00200000) /* Peripheral chip-select 5 inactive state */ -+#define MCF_DSPI_DMCR_PCSIS6 (0x00400000) /* Peripheral chip-select 6 inactive state */ -+#define MCF_DSPI_DMCR_PCSIS7 (0x00800000) /* Peripheral chip-select 7 inactive state */ -+#define MCF_DSPI_DMCR_ROOE (0x01000000) /* Receive FIFO overflow overwrite enable */ -+#define MCF_DSPI_DMCR_PCSSE (0x02000000) /* Peripheral chip select strobe enable */ -+#define MCF_DSPI_DMCR_MTFE (0x04000000) /* Modified timing format enable */ -+#define MCF_DSPI_DMCR_FRZ (0x08000000) /* Freeze */ -+#define MCF_DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28) /* DSPI configuration */ -+#define MCF_DSPI_DMCR_CONT_SCKE (0x40000000) /* Continuous SCK enable */ -+#define MCF_DSPI_DMCR_MSTR (0x80000000) /* Master/Slave mode select */ -+#define MCF_DSPI_DMCR_DCONF_SPI (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS7_LOW (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS7_HIGH (0x00800000) -+#define MCF_DSPI_DMCR_PCSIS6_LOW (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS6_HIGH (0x00400000) -+#define MCF_DSPI_DMCR_PCSIS5_LOW (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS5_HIGH (0x00200000) -+#define MCF_DSPI_DMCR_PCSIS4_LOW (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS4_HIGH (0x00100000) -+#define MCF_DSPI_DMCR_PCSIS3_LOW (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS3_HIGH (0x00080000) -+#define MCF_DSPI_DMCR_PCSIS2_LOW (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS2_HIGH (0x00040000) -+#define MCF_DSPI_DMCR_PCSIS1_LOW (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS1_HIGH (0x00020000) -+#define MCF_DSPI_DMCR_PCSIS0_LOW (0x00000000) -+#define MCF_DSPI_DMCR_PCSIS0_HIGH (0x00010000) -+ -+/* Bit definitions and macros for DTCR */ -+#define MCF_DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16) /* SPI transfer count */ -+ -+/* Bit definitions and macros for DCTAR group */ -+#define MCF_DSPI_DCTAR_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR_DBR (0x80000000) /* Double baud rate */ -+#define MCF_DSPI_DCTAR_CPOL_LOW (0x00000000) -+#define MCF_DSPI_DCTAR_CPOL_HIGH (0x04000000) -+#define MCF_DSPI_DCTAR_CPHA_LATCH_RISING (0x00000000) -+#define MCF_DSPI_DCTAR_CPHA_LATCH_FALLING (0x02000000) -+#define MCF_DSPI_DCTAR_PCSSCK_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR_PCSSCK_3CLK (0x00400000) -+#define MCF_DSPI_DCTAR_PCSSCK_5CLK (0x00800000) -+#define MCF_DSPI_DCTAR_PCSSCK_7CLK (0x00C00000) -+#define MCF_DSPI_DCTAR_PASC_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR_PASC_3CLK (0x00100000) -+#define MCF_DSPI_DCTAR_PASC_5CLK (0x00200000) -+#define MCF_DSPI_DCTAR_PASC_7CLK (0x00300000) -+#define MCF_DSPI_DCTAR_PDT_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR_PDT_3CLK (0x00040000) -+#define MCF_DSPI_DCTAR_PDT_5CLK (0x00080000) -+#define MCF_DSPI_DCTAR_PDT_7CLK (0x000C0000) -+#define MCF_DSPI_DCTAR_PBR_2CLK (0x00000000) -+#define MCF_DSPI_DCTAR_PBR_3CLK (0x00010000) -+#define MCF_DSPI_DCTAR_PBR_5CLK (0x00020000) -+#define MCF_DSPI_DCTAR_PBR_7CLK (0x00030000) -+ -+/* Bit definitions and macros for DCTAR0 */ -+#define MCF_DSPI_DCTAR0_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR0_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR0_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR0_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR0_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR0_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR0_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR0_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR0_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR0_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR0_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR0_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR0_DBR (0x80000000) /* Double baud rate */ -+#define MCF_DSPI_DCTAR0_CPOL_LOW (0x00000000) -+#define MCF_DSPI_DCTAR0_CPOL_HIGH (0x04000000) -+#define MCF_DSPI_DCTAR0_CPHA_LATCH_RISING (0x00000000) -+#define MCF_DSPI_DCTAR0_CPHA_LATCH_FALLING (0x02000000) -+#define MCF_DSPI_DCTAR0_PCSSCK_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR0_PCSSCK_3CLK (0x00400000) -+#define MCF_DSPI_DCTAR0_PCSSCK_5CLK (0x00800000) -+#define MCF_DSPI_DCTAR0_PCSSCK_7CLK (0x00C00000) -+#define MCF_DSPI_DCTAR0_PASC_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR0_PASC_3CLK (0x00100000) -+#define MCF_DSPI_DCTAR0_PASC_5CLK (0x00200000) -+#define MCF_DSPI_DCTAR0_PASC_7CLK (0x00300000) -+#define MCF_DSPI_DCTAR0_PDT_1CLK (0x00000000) -+#define MCF_DSPI_DCTAR0_PDT_3CLK (0x00040000) -+#define MCF_DSPI_DCTAR0_PDT_5CLK (0x00080000) -+#define MCF_DSPI_DCTAR0_PDT_7CLK (0x000C0000) -+#define MCF_DSPI_DCTAR0_PBR_2CLK (0x00000000) -+#define MCF_DSPI_DCTAR0_PBR_3CLK (0x00010000) -+#define MCF_DSPI_DCTAR0_PBR_5CLK (0x00020000) -+#define MCF_DSPI_DCTAR0_PBR_7CLK (0x00030000) -+ -+/* Bit definitions and macros for DCTAR1 */ -+#define MCF_DSPI_DCTAR1_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR1_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR1_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR1_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR1_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR1_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR1_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR1_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR1_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR1_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR1_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR1_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR1_DBR (0x80000000) /* Double baud rate */ -+ -+/* Bit definitions and macros for DCTAR2 */ -+#define MCF_DSPI_DCTAR2_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR2_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR2_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR2_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR2_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR2_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR2_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR2_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR2_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR2_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR2_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR2_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR2_DBR (0x80000000) /* Double baud rate */ -+ -+/* Bit definitions and macros for DCTAR3 */ -+#define MCF_DSPI_DCTAR3_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR3_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR3_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR3_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR3_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR3_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR3_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR3_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR3_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR3_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR3_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR3_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR3_DBR (0x80000000) /* Double baud rate */ -+ -+/* Bit definitions and macros for DCTAR4 */ -+#define MCF_DSPI_DCTAR4_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR4_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR4_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR4_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR4_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR4_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR4_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR4_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR4_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR4_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR4_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR4_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR4_DBR (0x80000000) /* Double baud rate */ -+ -+/* Bit definitions and macros for DCTAR5 */ -+#define MCF_DSPI_DCTAR5_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR5_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR5_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR5_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR5_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR5_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR5_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR5_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR5_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR5_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR5_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR5_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR5_DBR (0x80000000) /* Double baud rate */ -+ -+/* Bit definitions and macros for DCTAR6 */ -+#define MCF_DSPI_DCTAR6_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR6_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR6_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR6_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR6_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR6_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR6_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR6_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR6_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR6_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR6_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR6_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR6_DBR (0x80000000) /* Double baud rate */ -+ -+/* Bit definitions and macros for DCTAR7 */ -+#define MCF_DSPI_DCTAR7_BR(x) (((x)&0x0000000F)) /* Baud rate scaler */ -+#define MCF_DSPI_DCTAR7_DT(x) (((x)&0x0000000F)<<4) /* Delay after transfer scaler */ -+#define MCF_DSPI_DCTAR7_ASC(x) (((x)&0x0000000F)<<8) /* After SCK delay scaler */ -+#define MCF_DSPI_DCTAR7_CSSCK(x) (((x)&0x0000000F)<<12) /* PCS to SCK delay scaler */ -+#define MCF_DSPI_DCTAR7_PBR(x) (((x)&0x00000003)<<16) /* Baud rate prescaler */ -+#define MCF_DSPI_DCTAR7_PDT(x) (((x)&0x00000003)<<18) /* Delay after transfer prescaler */ -+#define MCF_DSPI_DCTAR7_PASC(x) (((x)&0x00000003)<<20) /* After SCK delay prescaler */ -+#define MCF_DSPI_DCTAR7_PCSSCK(x) (((x)&0x00000003)<<22) /* PCS to SCK delay prescaler */ -+#define MCF_DSPI_DCTAR7_LSBFE (0x01000000) /* LSB first enable */ -+#define MCF_DSPI_DCTAR7_CPHA (0x02000000) /* Clock phase */ -+#define MCF_DSPI_DCTAR7_CPOL (0x04000000) /* Clock polarity */ -+#define MCF_DSPI_DCTAR7_FMSZ(x) (((x)&0x0000000F)<<27) /* Frame size */ -+#define MCF_DSPI_DCTAR7_DBR (0x80000000) /* Double baud rate */ -+ -+/* Bit definitions and macros for DSR */ -+#define MCF_DSPI_DSR_RXPTR(x) (((x)&0x0000000F)) /* Receive next pointer */ -+#define MCF_DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4) /* Receive FIFO counter */ -+#define MCF_DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8) /* Transmit next pointer */ -+#define MCF_DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12) /* Transmit FIFO counter */ -+#define MCF_DSPI_DSR_RFDF (0x00020000) /* Receive FIFO drain flag */ -+#define MCF_DSPI_DSR_RFOF (0x00080000) /* Receive FIFO overflow flag */ -+#define MCF_DSPI_DSR_TFFF (0x02000000) /* Transmit FIFO fill flag */ -+#define MCF_DSPI_DSR_TFUF (0x08000000) /* Transmit FIFO underflow flag */ -+#define MCF_DSPI_DSR_EOQF (0x10000000) /* End of queue flag */ -+#define MCF_DSPI_DSR_TXRXS (0x40000000) /* Tx and Rx status (enabled | disabled) */ -+#define MCF_DSPI_DSR_TCF (0x80000000) /* Transfer complete flag */ -+ -+/* Bit definitions and macros for DRSER */ -+#define MCF_DSPI_DRSER_RFDFS (0x00010000) /* Receive FIFO drain DMA or interrupt select */ -+#define MCF_DSPI_DRSER_RFDFE (0x00020000) /* Receive FIFO drain request enable */ -+#define MCF_DSPI_DRSER_RFOFE (0x00080000) /* Receive FIFO overflow request enable */ -+#define MCF_DSPI_DRSER_TFFFS (0x01000000) /* Transmit FIFO fill DMA or interrupt select */ -+#define MCF_DSPI_DRSER_TFFFE (0x02000000) /* Transmit FIFO fill request enable */ -+#define MCF_DSPI_DRSER_TFUFE (0x08000000) /* Transmit FIFO underflow request enable */ -+#define MCF_DSPI_DRSER_EOQFE (0x10000000) /* DSPI finished request enable */ -+#define MCF_DSPI_DRSER_TCFE (0x80000000) /* Transmission complete request enable */ -+ -+/* Bit definitions and macros for DTFR */ -+#define MCF_DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ -+#define MCF_DSPI_DTFR_PCS0 (0x00010000) /* Peripheral chip select 0 */ -+#define MCF_DSPI_DTFR_PCS1 (0x00020000) /* Peripheral chip select 1 */ -+#define MCF_DSPI_DTFR_PCS2 (0x00040000) /* Peripheral chip select 2 */ -+#define MCF_DSPI_DTFR_PCS3 (0x00080000) /* Peripheral chip select 3 */ -+#define MCF_DSPI_DTFR_PCS4 (0x00100000) /* Peripheral chip select 4 */ -+#define MCF_DSPI_DTFR_PCS5 (0x00200000) /* Peripheral chip select 5 */ -+#define MCF_DSPI_DTFR_PCS6 (0x00400000) /* Peripheral chip select 6 */ -+#define MCF_DSPI_DTFR_PCS7 (0x00800000) /* Peripheral chip select 7 */ -+#define MCF_DSPI_DTFR_CTCNT (0x04000000) /* Clear SPI transfer counter */ -+#define MCF_DSPI_DTFR_EOQ (0x08000000) /* End of queue */ -+#define MCF_DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ -+#define MCF_DSPI_DTFR_CONT (0x80000000) /* Continuous peripheral chip-select enable */ -+ -+/* Bit definitions and macros for DRFR */ -+#define MCF_DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ -+ -+/* Bit definitions and macros for DTFDR group */ -+#define MCF_DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ -+#define MCF_DSPI_DTFDR_PCS0 (0x00010000) /* Peripheral chip select 0 */ -+#define MCF_DSPI_DTFDR_PCS1 (0x00020000) /* Peripheral chip select 1 */ -+#define MCF_DSPI_DTFDR_PCS2 (0x00040000) /* Peripheral chip select 2 */ -+#define MCF_DSPI_DTFDR_PCS3 (0x00080000) /* Peripheral chip select 3 */ -+#define MCF_DSPI_DTFDR_PCS4 (0x00100000) /* Peripheral chip select 4 */ -+#define MCF_DSPI_DTFDR_PCS5 (0x00200000) /* Peripheral chip select 5 */ -+#define MCF_DSPI_DTFDR_PCS6 (0x00400000) /* Peripheral chip select 6 */ -+#define MCF_DSPI_DTFDR_PCS7 (0x00800000) /* Peripheral chip select 7 */ -+#define MCF_DSPI_DTFDR_CTCNT (0x04000000) /* Clear SPI transfer counter */ -+#define MCF_DSPI_DTFDR_EOQ (0x08000000) /* End of queue */ -+#define MCF_DSPI_DTFDR_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ -+#define MCF_DSPI_DTFDR_CONT (0x80000000) /* Continuous peripheral chip-select enable */ -+ -+/* Bit definitions and macros for DTFDR0 */ -+#define MCF_DSPI_DTFDR0_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ -+#define MCF_DSPI_DTFDR0_PCS0 (0x00010000) /* Peripheral chip select 0 */ -+#define MCF_DSPI_DTFDR0_PCS1 (0x00020000) /* Peripheral chip select 1 */ -+#define MCF_DSPI_DTFDR0_PCS2 (0x00040000) /* Peripheral chip select 2 */ -+#define MCF_DSPI_DTFDR0_PCS3 (0x00080000) /* Peripheral chip select 3 */ -+#define MCF_DSPI_DTFDR0_PCS4 (0x00100000) /* Peripheral chip select 4 */ -+#define MCF_DSPI_DTFDR0_PCS5 (0x00200000) /* Peripheral chip select 5 */ -+#define MCF_DSPI_DTFDR0_PCS6 (0x00400000) /* Peripheral chip select 6 */ -+#define MCF_DSPI_DTFDR0_PCS7 (0x00800000) /* Peripheral chip select 7 */ -+#define MCF_DSPI_DTFDR0_CTCNT (0x04000000) /* Clear SPI transfer counter */ -+#define MCF_DSPI_DTFDR0_EOQ (0x08000000) /* End of queue */ -+#define MCF_DSPI_DTFDR0_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ -+#define MCF_DSPI_DTFDR0_CONT (0x80000000) /* Continuous peripheral chip-select enable */ -+ -+/* Bit definitions and macros for DTFDR1 */ -+#define MCF_DSPI_DTFDR1_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ -+#define MCF_DSPI_DTFDR1_PCS0 (0x00010000) /* Peripheral chip select 0 */ -+#define MCF_DSPI_DTFDR1_PCS1 (0x00020000) /* Peripheral chip select 1 */ -+#define MCF_DSPI_DTFDR1_PCS2 (0x00040000) /* Peripheral chip select 2 */ -+#define MCF_DSPI_DTFDR1_PCS3 (0x00080000) /* Peripheral chip select 3 */ -+#define MCF_DSPI_DTFDR1_PCS4 (0x00100000) /* Peripheral chip select 4 */ -+#define MCF_DSPI_DTFDR1_PCS5 (0x00200000) /* Peripheral chip select 5 */ -+#define MCF_DSPI_DTFDR1_PCS6 (0x00400000) /* Peripheral chip select 6 */ -+#define MCF_DSPI_DTFDR1_PCS7 (0x00800000) /* Peripheral chip select 7 */ -+#define MCF_DSPI_DTFDR1_CTCNT (0x04000000) /* Clear SPI transfer counter */ -+#define MCF_DSPI_DTFDR1_EOQ (0x08000000) /* End of queue */ -+#define MCF_DSPI_DTFDR1_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ -+#define MCF_DSPI_DTFDR1_CONT (0x80000000) /* Continuous peripheral chip-select enable */ -+ -+/* Bit definitions and macros for DTFDR2 */ -+#define MCF_DSPI_DTFDR2_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ -+#define MCF_DSPI_DTFDR2_PCS0 (0x00010000) /* Peripheral chip select 0 */ -+#define MCF_DSPI_DTFDR2_PCS1 (0x00020000) /* Peripheral chip select 1 */ -+#define MCF_DSPI_DTFDR2_PCS2 (0x00040000) /* Peripheral chip select 2 */ -+#define MCF_DSPI_DTFDR2_PCS3 (0x00080000) /* Peripheral chip select 3 */ -+#define MCF_DSPI_DTFDR2_PCS4 (0x00100000) /* Peripheral chip select 4 */ -+#define MCF_DSPI_DTFDR2_PCS5 (0x00200000) /* Peripheral chip select 5 */ -+#define MCF_DSPI_DTFDR2_PCS6 (0x00400000) /* Peripheral chip select 6 */ -+#define MCF_DSPI_DTFDR2_PCS7 (0x00800000) /* Peripheral chip select 7 */ -+#define MCF_DSPI_DTFDR2_CTCNT (0x04000000) /* Clear SPI transfer counter */ -+#define MCF_DSPI_DTFDR2_EOQ (0x08000000) /* End of queue */ -+#define MCF_DSPI_DTFDR2_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ -+#define MCF_DSPI_DTFDR2_CONT (0x80000000) /* Continuous peripheral chip-select enable */ -+ -+/* Bit definitions and macros for DTFDR3 */ -+#define MCF_DSPI_DTFDR3_TXDATA(x) (((x)&0x0000FFFF)) /* Transmit data */ -+#define MCF_DSPI_DTFDR3_PCS0 (0x00010000) /* Peripheral chip select 0 */ -+#define MCF_DSPI_DTFDR3_PCS1 (0x00020000) /* Peripheral chip select 1 */ -+#define MCF_DSPI_DTFDR3_PCS2 (0x00040000) /* Peripheral chip select 2 */ -+#define MCF_DSPI_DTFDR3_PCS3 (0x00080000) /* Peripheral chip select 3 */ -+#define MCF_DSPI_DTFDR3_PCS4 (0x00100000) /* Peripheral chip select 4 */ -+#define MCF_DSPI_DTFDR3_PCS5 (0x00200000) /* Peripheral chip select 5 */ -+#define MCF_DSPI_DTFDR3_PCS6 (0x00400000) /* Peripheral chip select 6 */ -+#define MCF_DSPI_DTFDR3_PCS7 (0x00800000) /* Peripheral chip select 7 */ -+#define MCF_DSPI_DTFDR3_CTCNT (0x04000000) /* Clear SPI transfer counter */ -+#define MCF_DSPI_DTFDR3_EOQ (0x08000000) /* End of queue */ -+#define MCF_DSPI_DTFDR3_CTAS(x) (((x)&0x00000007)<<28) /* Clock and transfer attributes select */ -+#define MCF_DSPI_DTFDR3_CONT (0x80000000) /* Continuous peripheral chip-select enable */ -+ -+/* Bit definitions and macros for DRFDR group */ -+#define MCF_DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ -+ -+/* Bit definitions and macros for DRFDR0 */ -+#define MCF_DSPI_DRFDR0_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ -+ -+/* Bit definitions and macros for DRFDR1 */ -+#define MCF_DSPI_DRFDR1_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ -+ -+/* Bit definitions and macros for DRFDR2 */ -+#define MCF_DSPI_DRFDR2_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ -+ -+/* Bit definitions and macros for DRFDR3 */ -+#define MCF_DSPI_DRFDR3_RXDATA(x) (((x)&0x0000FFFF)) /* Receive data */ -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_DSPI_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_dtim.h -@@ -0,0 +1,87 @@ -+/* -+ * Matt Waddel Matt.Waddel@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_DTIM_H__ -+#define __MCF5445X_DTIM_H__ -+ -+/********************************************************************* -+* -+* DMA Timers (DTIM) -+* -+*********************************************************************/ -+/* Register read/write macros */ -+#define MCF_DTIM0_DTMR 0xFC070000 /* DMA Timer Mode Register */ -+#define MCF_DTIM0_DTXMR 0xFC070002 /* DMA Timer Extended Mode Register */ -+#define MCF_DTIM0_DTER 0xFC070003 /* DMA Timer Event Register */ -+#define MCF_DTIM0_DTRR 0xFC070004 /* DMA Timer Reference Register */ -+#define MCF_DTIM0_DTCR 0xFC070008 /* DMA Timer Capture Register */ -+#define MCF_DTIM0_DTCN 0xFC07000C /* DMA Timer Counter Register */ -+#define MCF_DTIM1_DTMR 0xFC074000 /* DMA Timer Mode Register */ -+#define MCF_DTIM1_DTXMR 0xFC074002 /* DMA Timer Extended Mode Register */ -+#define MCF_DTIM1_DTER 0xFC074003 /* DMA Timer Event Register */ -+#define MCF_DTIM1_DTRR 0xFC074004 /* DMA Timer Reference Register */ -+#define MCF_DTIM1_DTCR 0xFC074008 /* DMA Timer Capture Register */ -+#define MCF_DTIM1_DTCN 0xFC07400C /* DMA Timer Counter Register */ -+#define MCF_DTIM2_DTMR 0xFC078000 /* DMA Timer Mode Register */ -+#define MCF_DTIM2_DTXMR 0xFC078002 /* DMA Timer Extended Mode Register */ -+#define MCF_DTIM2_DTER 0xFC078003 /* DMA Timer Event Register */ -+#define MCF_DTIM2_DTRR 0xFC078004 /* DMA Timer Reference Register */ -+#define MCF_DTIM2_DTCR 0xFC078008 /* DMA Timer Capture Register */ -+#define MCF_DTIM2_DTCN 0xFC07800C /* DMA Timer Counter Register */ -+#define MCF_DTIM3_DTMR 0xFC07C000 /* DMA Timer Mode Register */ -+#define MCF_DTIM3_DTXMR 0xFC07C002 /* DMA Timer Extended Mode Register */ -+#define MCF_DTIM3_DTER 0xFC07C003 /* DMA Timer Event Register */ -+#define MCF_DTIM3_DTRR 0xFC07C004 /* DMA Timer Reference Register */ -+#define MCF_DTIM3_DTCR 0xFC07C008 /* DMA Timer Capture Register */ -+#define MCF_DTIM3_DTCN 0xFC07C00C /* DMA Timer Counter Register */ -+ -+/* Parameterized register read/write macros for multiple modules */ -+#define MCF_DTIM_DTMR(x) 0xFC070000+((x)*0x4000) /* DMA Timer Mode Register */ -+#define MCF_DTIM_DTXMR(x) 0xFC070002+((x)*0x4000) /* DMA Timer Extended Mode Register */ -+#define MCF_DTIM_DTER(x) 0xFC070003+((x)*0x4000) /* DMA Timer Event Register */ -+#define MCF_DTIM_DTRR(x) 0xFC070004+((x)*0x4000) /* DMA Timer Reference Register */ -+#define MCF_DTIM_DTCR(x) 0xFC070008+((x)*0x4000) /* DMA Timer Capture Register */ -+#define MCF_DTIM_DTCN(x) 0xFC07000C+((x)*0x4000) /* DMA Timer Counter Register */ -+ -+/* Bit definitions and macros for DTMR */ -+#define MCF_DTIM_DTMR_RST (0x0001) /* Reset */ -+#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */ -+#define MCF_DTIM_DTMR_FRR (0x0008) /* Free run/restart */ -+#define MCF_DTIM_DTMR_ORRI (0x0010) /* Output reference request/interrupt enable */ -+#define MCF_DTIM_DTMR_OM (0x0020) /* Output Mode */ -+#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */ -+#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */ -+#define MCF_DTIM_DTMR_RST_EN (0x0001) -+#define MCF_DTIM_DTMR_RST_RST (0x0000) -+#define MCF_DTIM_DTMR_CE_ANY (0x00C0) -+#define MCF_DTIM_DTMR_CE_FALL (0x0080) -+#define MCF_DTIM_DTMR_CE_RISE (0x0040) -+#define MCF_DTIM_DTMR_CE_NONE (0x0000) -+#define MCF_DTIM_DTMR_CLK_DTIN (0x0006) -+#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) -+#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) -+#define MCF_DTIM_DTMR_CLK_STOP (0x0000) -+ -+/* Bit definitions and macros for DTXMR */ -+#define MCF_DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */ -+#define MCF_DTIM_DTXMR_DMAEN (0x80) /* DMA request */ -+ -+/* Bit definitions and macros for DTER */ -+#define MCF_DTIM_DTER_CAP (0x01) /* Capture event */ -+#define MCF_DTIM_DTER_REF (0x02) /* Output reference event */ -+ -+/* Interrupts used for system timers */ -+#define MCFSIM_ICR_TIMER1 (0xFC048040+32) -+#define MCFSIM_ICR_TIMER2 (0xFC048040+33) -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_DTIM_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_edma.h -@@ -0,0 +1,1472 @@ -+/* -+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+#ifndef __MCF5445X_EDMA_H__ -+#define __MCF5445X_EDMA_H__ -+ -+/* -+ * Enhanced DMA (EDMA) -+ */ -+ -+/* Channels */ -+#define MCF_EDMA_CHAN_DREQ0 0 /* External DMA request 0 */ -+#define MCF_EDMA_CHAN_DREQ1 1 /* External DMA request 1 */ -+#define MCF_EDMA_CHAN_UART0_RX 2 /* UART0 Receive */ -+#define MCF_EDMA_CHAN_UART0_TX 3 /* UART0 Transmit */ -+#define MCF_EDMA_CHAN_UART1_RX 4 /* UART1 Receive */ -+#define MCF_EDMA_CHAN_UART1_TX 5 /* UART1 Transmit */ -+#define MCF_EDMA_CHAN_UART2_RX 6 /* UART2 Receive */ -+#define MCF_EDMA_CHAN_UART2_TX 7 /* UART2 Transmit */ -+#define MCF_EDMA_CHAN_TIMER0 8 /* Timer 0 / SSI0 Rx */ -+#define MCF_EDMA_CHAN_TIMER1 9 /* Timer 1 / SSI1 Rx */ -+#define MCF_EDMA_CHAN_TIMER2 10 /* Timer 2 / SSI0 Tx */ -+#define MCF_EDMA_CHAN_TIMER3 11 /* Timer 3 / SSI1 Tx */ -+#define MCF_EDMA_CHAN_DSPI_RX 12 /* DSPI Receive */ -+#define MCF_EDMA_CHAN_DSPI_TX 13 /* DSPI Transmit */ -+#define MCF_EDMA_CHAN_ATA_RX 14 /* ATA Receive */ -+#define MCF_EDMA_CHAN_ATA_TX 15 /* ATA Transmit */ -+ -+/* Register read/write macros */ -+#define MCF_EDMA_CR MCF_REG32(0xFC044000) -+#define MCF_EDMA_ES MCF_REG32(0xFC044004) -+#define MCF_EDMA_ERQ MCF_REG16(0xFC04400E) -+#define MCF_EDMA_EEI MCF_REG16(0xFC044016) -+#define MCF_EDMA_SERQ MCF_REG08(0xFC044018) -+#define MCF_EDMA_CERQ MCF_REG08(0xFC044019) -+#define MCF_EDMA_SEEI MCF_REG08(0xFC04401A) -+#define MCF_EDMA_CEEI MCF_REG08(0xFC04401B) -+#define MCF_EDMA_CINT MCF_REG08(0xFC04401C) -+#define MCF_EDMA_CERR MCF_REG08(0xFC04401D) -+#define MCF_EDMA_SSRT MCF_REG08(0xFC04401E) -+#define MCF_EDMA_CDNE MCF_REG08(0xFC04401F) -+#define MCF_EDMA_INTR MCF_REG16(0xFC044026) -+#define MCF_EDMA_ERR MCF_REG16(0xFC04402E) -+#define MCF_EDMA_DCHPRI0 MCF_REG08(0xFC044100) -+#define MCF_EDMA_DCHPRI1 MCF_REG08(0xFC044101) -+#define MCF_EDMA_DCHPRI2 MCF_REG08(0xFC044102) -+#define MCF_EDMA_DCHPRI3 MCF_REG08(0xFC044103) -+#define MCF_EDMA_DCHPRI4 MCF_REG08(0xFC044104) -+#define MCF_EDMA_DCHPRI5 MCF_REG08(0xFC044105) -+#define MCF_EDMA_DCHPRI6 MCF_REG08(0xFC044106) -+#define MCF_EDMA_DCHPRI7 MCF_REG08(0xFC044107) -+#define MCF_EDMA_DCHPRI8 MCF_REG08(0xFC044108) -+#define MCF_EDMA_DCHPRI9 MCF_REG08(0xFC044109) -+#define MCF_EDMA_DCHPRI10 MCF_REG08(0xFC04410A) -+#define MCF_EDMA_DCHPRI11 MCF_REG08(0xFC04410B) -+#define MCF_EDMA_DCHPRI12 MCF_REG08(0xFC04410C) -+#define MCF_EDMA_DCHPRI13 MCF_REG08(0xFC04410D) -+#define MCF_EDMA_DCHPRI14 MCF_REG08(0xFC04410E) -+#define MCF_EDMA_DCHPRI15 MCF_REG08(0xFC04410F) -+#define MCF_EDMA_TCD0_SADDR MCF_REG32(0xFC045000) -+#define MCF_EDMA_TCD0_ATTR MCF_REG16(0xFC045004) -+#define MCF_EDMA_TCD0_SOFF MCF_REG16(0xFC045006) -+#define MCF_EDMA_TCD0_NBYTES MCF_REG32(0xFC045008) -+#define MCF_EDMA_TCD0_SLAST MCF_REG32(0xFC04500C) -+#define MCF_EDMA_TCD0_DADDR MCF_REG32(0xFC045010) -+#define MCF_EDMA_TCD0_CITER_ELINK MCF_REG16(0xFC045014) -+#define MCF_EDMA_TCD0_CITER MCF_REG16(0xFC045014) -+#define MCF_EDMA_TCD0_DOFF MCF_REG16(0xFC045016) -+#define MCF_EDMA_TCD0_DLAST_SGA MCF_REG32(0xFC045018) -+#define MCF_EDMA_TCD0_BITER_ELINK MCF_REG16(0xFC04501C) -+#define MCF_EDMA_TCD0_BITER MCF_REG16(0xFC04501C) -+#define MCF_EDMA_TCD0_CSR MCF_REG16(0xFC04501E) -+#define MCF_EDMA_TCD1_SADDR MCF_REG32(0xFC045020) -+#define MCF_EDMA_TCD1_ATTR MCF_REG16(0xFC045024) -+#define MCF_EDMA_TCD1_SOFF MCF_REG16(0xFC045026) -+#define MCF_EDMA_TCD1_NBYTES MCF_REG32(0xFC045028) -+#define MCF_EDMA_TCD1_SLAST MCF_REG32(0xFC04502C) -+#define MCF_EDMA_TCD1_DADDR MCF_REG32(0xFC045030) -+#define MCF_EDMA_TCD1_CITER_ELINK MCF_REG16(0xFC045034) -+#define MCF_EDMA_TCD1_CITER MCF_REG16(0xFC045034) -+#define MCF_EDMA_TCD1_DOFF MCF_REG16(0xFC045036) -+#define MCF_EDMA_TCD1_DLAST_SGA MCF_REG32(0xFC045038) -+#define MCF_EDMA_TCD1_BITER MCF_REG16(0xFC04503C) -+#define MCF_EDMA_TCD1_BITER_ELINK MCF_REG16(0xFC04503C) -+#define MCF_EDMA_TCD1_CSR MCF_REG16(0xFC04503E) -+#define MCF_EDMA_TCD2_SADDR MCF_REG32(0xFC045040) -+#define MCF_EDMA_TCD2_ATTR MCF_REG16(0xFC045044) -+#define MCF_EDMA_TCD2_SOFF MCF_REG16(0xFC045046) -+#define MCF_EDMA_TCD2_NBYTES MCF_REG32(0xFC045048) -+#define MCF_EDMA_TCD2_SLAST MCF_REG32(0xFC04504C) -+#define MCF_EDMA_TCD2_DADDR MCF_REG32(0xFC045050) -+#define MCF_EDMA_TCD2_CITER MCF_REG16(0xFC045054) -+#define MCF_EDMA_TCD2_CITER_ELINK MCF_REG16(0xFC045054) -+#define MCF_EDMA_TCD2_DOFF MCF_REG16(0xFC045056) -+#define MCF_EDMA_TCD2_DLAST_SGA MCF_REG32(0xFC045058) -+#define MCF_EDMA_TCD2_BITER_ELINK MCF_REG16(0xFC04505C) -+#define MCF_EDMA_TCD2_BITER MCF_REG16(0xFC04505C) -+#define MCF_EDMA_TCD2_CSR MCF_REG16(0xFC04505E) -+#define MCF_EDMA_TCD3_SADDR MCF_REG32(0xFC045060) -+#define MCF_EDMA_TCD3_ATTR MCF_REG16(0xFC045064) -+#define MCF_EDMA_TCD3_SOFF MCF_REG16(0xFC045066) -+#define MCF_EDMA_TCD3_NBYTES MCF_REG32(0xFC045068) -+#define MCF_EDMA_TCD3_SLAST MCF_REG32(0xFC04506C) -+#define MCF_EDMA_TCD3_DADDR MCF_REG32(0xFC045070) -+#define MCF_EDMA_TCD3_CITER MCF_REG16(0xFC045074) -+#define MCF_EDMA_TCD3_CITER_ELINK MCF_REG16(0xFC045074) -+#define MCF_EDMA_TCD3_DOFF MCF_REG16(0xFC045076) -+#define MCF_EDMA_TCD3_DLAST_SGA MCF_REG32(0xFC045078) -+#define MCF_EDMA_TCD3_BITER_ELINK MCF_REG16(0xFC04507C) -+#define MCF_EDMA_TCD3_BITER MCF_REG16(0xFC04507C) -+#define MCF_EDMA_TCD3_CSR MCF_REG16(0xFC04507E) -+#define MCF_EDMA_TCD4_SADDR MCF_REG32(0xFC045080) -+#define MCF_EDMA_TCD4_ATTR MCF_REG16(0xFC045084) -+#define MCF_EDMA_TCD4_SOFF MCF_REG16(0xFC045086) -+#define MCF_EDMA_TCD4_NBYTES MCF_REG32(0xFC045088) -+#define MCF_EDMA_TCD4_SLAST MCF_REG32(0xFC04508C) -+#define MCF_EDMA_TCD4_DADDR MCF_REG32(0xFC045090) -+#define MCF_EDMA_TCD4_CITER MCF_REG16(0xFC045094) -+#define MCF_EDMA_TCD4_CITER_ELINK MCF_REG16(0xFC045094) -+#define MCF_EDMA_TCD4_DOFF MCF_REG16(0xFC045096) -+#define MCF_EDMA_TCD4_DLAST_SGA MCF_REG32(0xFC045098) -+#define MCF_EDMA_TCD4_BITER MCF_REG16(0xFC04509C) -+#define MCF_EDMA_TCD4_BITER_ELINK MCF_REG16(0xFC04509C) -+#define MCF_EDMA_TCD4_CSR MCF_REG16(0xFC04509E) -+#define MCF_EDMA_TCD5_SADDR MCF_REG32(0xFC0450A0) -+#define MCF_EDMA_TCD5_ATTR MCF_REG16(0xFC0450A4) -+#define MCF_EDMA_TCD5_SOFF MCF_REG16(0xFC0450A6) -+#define MCF_EDMA_TCD5_NBYTES MCF_REG32(0xFC0450A8) -+#define MCF_EDMA_TCD5_SLAST MCF_REG32(0xFC0450AC) -+#define MCF_EDMA_TCD5_DADDR MCF_REG32(0xFC0450B0) -+#define MCF_EDMA_TCD5_CITER MCF_REG16(0xFC0450B4) -+#define MCF_EDMA_TCD5_CITER_ELINK MCF_REG16(0xFC0450B4) -+#define MCF_EDMA_TCD5_DOFF MCF_REG16(0xFC0450B6) -+#define MCF_EDMA_TCD5_DLAST_SGA MCF_REG32(0xFC0450B8) -+#define MCF_EDMA_TCD5_BITER_ELINK MCF_REG16(0xFC0450BC) -+#define MCF_EDMA_TCD5_BITER MCF_REG16(0xFC0450BC) -+#define MCF_EDMA_TCD5_CSR MCF_REG16(0xFC0450BE) -+#define MCF_EDMA_TCD6_SADDR MCF_REG32(0xFC0450C0) -+#define MCF_EDMA_TCD6_ATTR MCF_REG16(0xFC0450C4) -+#define MCF_EDMA_TCD6_SOFF MCF_REG16(0xFC0450C6) -+#define MCF_EDMA_TCD6_NBYTES MCF_REG32(0xFC0450C8) -+#define MCF_EDMA_TCD6_SLAST MCF_REG32(0xFC0450CC) -+#define MCF_EDMA_TCD6_DADDR MCF_REG32(0xFC0450D0) -+#define MCF_EDMA_TCD6_CITER MCF_REG16(0xFC0450D4) -+#define MCF_EDMA_TCD6_CITER_ELINK MCF_REG16(0xFC0450D4) -+#define MCF_EDMA_TCD6_DOFF MCF_REG16(0xFC0450D6) -+#define MCF_EDMA_TCD6_DLAST_SGA MCF_REG32(0xFC0450D8) -+#define MCF_EDMA_TCD6_BITER_ELINK MCF_REG16(0xFC0450DC) -+#define MCF_EDMA_TCD6_BITER MCF_REG16(0xFC0450DC) -+#define MCF_EDMA_TCD6_CSR MCF_REG16(0xFC0450DE) -+#define MCF_EDMA_TCD7_SADDR MCF_REG32(0xFC0450E0) -+#define MCF_EDMA_TCD7_ATTR MCF_REG16(0xFC0450E4) -+#define MCF_EDMA_TCD7_SOFF MCF_REG16(0xFC0450E6) -+#define MCF_EDMA_TCD7_NBYTES MCF_REG32(0xFC0450E8) -+#define MCF_EDMA_TCD7_SLAST MCF_REG32(0xFC0450EC) -+#define MCF_EDMA_TCD7_DADDR MCF_REG32(0xFC0450F0) -+#define MCF_EDMA_TCD7_CITER MCF_REG16(0xFC0450F4) -+#define MCF_EDMA_TCD7_CITER_ELINK MCF_REG16(0xFC0450F4) -+#define MCF_EDMA_TCD7_DOFF MCF_REG16(0xFC0450F6) -+#define MCF_EDMA_TCD7_DLAST_SGA MCF_REG32(0xFC0450F8) -+#define MCF_EDMA_TCD7_BITER_ELINK MCF_REG16(0xFC0450FC) -+#define MCF_EDMA_TCD7_BITER MCF_REG16(0xFC0450FC) -+#define MCF_EDMA_TCD7_CSR MCF_REG16(0xFC0450FE) -+#define MCF_EDMA_TCD8_SADDR MCF_REG32(0xFC045100) -+#define MCF_EDMA_TCD8_ATTR MCF_REG16(0xFC045104) -+#define MCF_EDMA_TCD8_SOFF MCF_REG16(0xFC045106) -+#define MCF_EDMA_TCD8_NBYTES MCF_REG32(0xFC045108) -+#define MCF_EDMA_TCD8_SLAST MCF_REG32(0xFC04510C) -+#define MCF_EDMA_TCD8_DADDR MCF_REG32(0xFC045110) -+#define MCF_EDMA_TCD8_CITER MCF_REG16(0xFC045114) -+#define MCF_EDMA_TCD8_CITER_ELINK MCF_REG16(0xFC045114) -+#define MCF_EDMA_TCD8_DOFF MCF_REG16(0xFC045116) -+#define MCF_EDMA_TCD8_DLAST_SGA MCF_REG32(0xFC045118) -+#define MCF_EDMA_TCD8_BITER_ELINK MCF_REG16(0xFC04511C) -+#define MCF_EDMA_TCD8_BITER MCF_REG16(0xFC04511C) -+#define MCF_EDMA_TCD8_CSR MCF_REG16(0xFC04511E) -+#define MCF_EDMA_TCD9_SADDR MCF_REG32(0xFC045120) -+#define MCF_EDMA_TCD9_ATTR MCF_REG16(0xFC045124) -+#define MCF_EDMA_TCD9_SOFF MCF_REG16(0xFC045126) -+#define MCF_EDMA_TCD9_NBYTES MCF_REG32(0xFC045128) -+#define MCF_EDMA_TCD9_SLAST MCF_REG32(0xFC04512C) -+#define MCF_EDMA_TCD9_DADDR MCF_REG32(0xFC045130) -+#define MCF_EDMA_TCD9_CITER_ELINK MCF_REG16(0xFC045134) -+#define MCF_EDMA_TCD9_CITER MCF_REG16(0xFC045134) -+#define MCF_EDMA_TCD9_DOFF MCF_REG16(0xFC045136) -+#define MCF_EDMA_TCD9_DLAST_SGA MCF_REG32(0xFC045138) -+#define MCF_EDMA_TCD9_BITER_ELINK MCF_REG16(0xFC04513C) -+#define MCF_EDMA_TCD9_BITER MCF_REG16(0xFC04513C) -+#define MCF_EDMA_TCD9_CSR MCF_REG16(0xFC04513E) -+#define MCF_EDMA_TCD10_SADDR MCF_REG32(0xFC045140) -+#define MCF_EDMA_TCD10_ATTR MCF_REG16(0xFC045144) -+#define MCF_EDMA_TCD10_SOFF MCF_REG16(0xFC045146) -+#define MCF_EDMA_TCD10_NBYTES MCF_REG32(0xFC045148) -+#define MCF_EDMA_TCD10_SLAST MCF_REG32(0xFC04514C) -+#define MCF_EDMA_TCD10_DADDR MCF_REG32(0xFC045150) -+#define MCF_EDMA_TCD10_CITER_ELINK MCF_REG16(0xFC045154) -+#define MCF_EDMA_TCD10_CITER MCF_REG16(0xFC045154) -+#define MCF_EDMA_TCD10_DOFF MCF_REG16(0xFC045156) -+#define MCF_EDMA_TCD10_DLAST_SGA MCF_REG32(0xFC045158) -+#define MCF_EDMA_TCD10_BITER MCF_REG16(0xFC04515C) -+#define MCF_EDMA_TCD10_BITER_ELINK MCF_REG16(0xFC04515C) -+#define MCF_EDMA_TCD10_CSR MCF_REG16(0xFC04515E) -+#define MCF_EDMA_TCD11_SADDR MCF_REG32(0xFC045160) -+#define MCF_EDMA_TCD11_ATTR MCF_REG16(0xFC045164) -+#define MCF_EDMA_TCD11_SOFF MCF_REG16(0xFC045166) -+#define MCF_EDMA_TCD11_NBYTES MCF_REG32(0xFC045168) -+#define MCF_EDMA_TCD11_SLAST MCF_REG32(0xFC04516C) -+#define MCF_EDMA_TCD11_DADDR MCF_REG32(0xFC045170) -+#define MCF_EDMA_TCD11_CITER MCF_REG16(0xFC045174) -+#define MCF_EDMA_TCD11_CITER_ELINK MCF_REG16(0xFC045174) -+#define MCF_EDMA_TCD11_DOFF MCF_REG16(0xFC045176) -+#define MCF_EDMA_TCD11_DLAST_SGA MCF_REG32(0xFC045178) -+#define MCF_EDMA_TCD11_BITER MCF_REG16(0xFC04517C) -+#define MCF_EDMA_TCD11_BITER_ELINK MCF_REG16(0xFC04517C) -+#define MCF_EDMA_TCD11_CSR MCF_REG16(0xFC04517E) -+#define MCF_EDMA_TCD12_SADDR MCF_REG32(0xFC045180) -+#define MCF_EDMA_TCD12_ATTR MCF_REG16(0xFC045184) -+#define MCF_EDMA_TCD12_SOFF MCF_REG16(0xFC045186) -+#define MCF_EDMA_TCD12_NBYTES MCF_REG32(0xFC045188) -+#define MCF_EDMA_TCD12_SLAST MCF_REG32(0xFC04518C) -+#define MCF_EDMA_TCD12_DADDR MCF_REG32(0xFC045190) -+#define MCF_EDMA_TCD12_CITER MCF_REG16(0xFC045194) -+#define MCF_EDMA_TCD12_CITER_ELINK MCF_REG16(0xFC045194) -+#define MCF_EDMA_TCD12_DOFF MCF_REG16(0xFC045196) -+#define MCF_EDMA_TCD12_DLAST_SGA MCF_REG32(0xFC045198) -+#define MCF_EDMA_TCD12_BITER MCF_REG16(0xFC04519C) -+#define MCF_EDMA_TCD12_BITER_ELINK MCF_REG16(0xFC04519C) -+#define MCF_EDMA_TCD12_CSR MCF_REG16(0xFC04519E) -+#define MCF_EDMA_TCD13_SADDR MCF_REG32(0xFC0451A0) -+#define MCF_EDMA_TCD13_ATTR MCF_REG16(0xFC0451A4) -+#define MCF_EDMA_TCD13_SOFF MCF_REG16(0xFC0451A6) -+#define MCF_EDMA_TCD13_NBYTES MCF_REG32(0xFC0451A8) -+#define MCF_EDMA_TCD13_SLAST MCF_REG32(0xFC0451AC) -+#define MCF_EDMA_TCD13_DADDR MCF_REG32(0xFC0451B0) -+#define MCF_EDMA_TCD13_CITER_ELINK MCF_REG16(0xFC0451B4) -+#define MCF_EDMA_TCD13_CITER MCF_REG16(0xFC0451B4) -+#define MCF_EDMA_TCD13_DOFF MCF_REG16(0xFC0451B6) -+#define MCF_EDMA_TCD13_DLAST_SGA MCF_REG32(0xFC0451B8) -+#define MCF_EDMA_TCD13_BITER_ELINK MCF_REG16(0xFC0451BC) -+#define MCF_EDMA_TCD13_BITER MCF_REG16(0xFC0451BC) -+#define MCF_EDMA_TCD13_CSR MCF_REG16(0xFC0451BE) -+#define MCF_EDMA_TCD14_SADDR MCF_REG32(0xFC0451C0) -+#define MCF_EDMA_TCD14_ATTR MCF_REG16(0xFC0451C4) -+#define MCF_EDMA_TCD14_SOFF MCF_REG16(0xFC0451C6) -+#define MCF_EDMA_TCD14_NBYTES MCF_REG32(0xFC0451C8) -+#define MCF_EDMA_TCD14_SLAST MCF_REG32(0xFC0451CC) -+#define MCF_EDMA_TCD14_DADDR MCF_REG32(0xFC0451D0) -+#define MCF_EDMA_TCD14_CITER MCF_REG16(0xFC0451D4) -+#define MCF_EDMA_TCD14_CITER_ELINK MCF_REG16(0xFC0451D4) -+#define MCF_EDMA_TCD14_DOFF MCF_REG16(0xFC0451D6) -+#define MCF_EDMA_TCD14_DLAST_SGA MCF_REG32(0xFC0451D8) -+#define MCF_EDMA_TCD14_BITER_ELINK MCF_REG16(0xFC0451DC) -+#define MCF_EDMA_TCD14_BITER MCF_REG16(0xFC0451DC) -+#define MCF_EDMA_TCD14_CSR MCF_REG16(0xFC0451DE) -+#define MCF_EDMA_TCD15_SADDR MCF_REG32(0xFC0451E0) -+#define MCF_EDMA_TCD15_ATTR MCF_REG16(0xFC0451E4) -+#define MCF_EDMA_TCD15_SOFF MCF_REG16(0xFC0451E6) -+#define MCF_EDMA_TCD15_NBYTES MCF_REG32(0xFC0451E8) -+#define MCF_EDMA_TCD15_SLAST MCF_REG32(0xFC0451EC) -+#define MCF_EDMA_TCD15_DADDR MCF_REG32(0xFC0451F0) -+#define MCF_EDMA_TCD15_CITER_ELINK MCF_REG16(0xFC0451F4) -+#define MCF_EDMA_TCD15_CITER MCF_REG16(0xFC0451F4) -+#define MCF_EDMA_TCD15_DOFF MCF_REG16(0xFC0451F6) -+#define MCF_EDMA_TCD15_DLAST_SGA MCF_REG32(0xFC0451F8) -+#define MCF_EDMA_TCD15_BITER MCF_REG16(0xFC0451FC) -+#define MCF_EDMA_TCD15_BITER_ELINK MCF_REG16(0xFC0451FC) -+#define MCF_EDMA_TCD15_CSR MCF_REG16(0xFC0451FE) -+ -+/* Parameterized register read/write macros for multiple registers */ -+#define MCF_EDMA_DCHPRI(x) MCF_REG08(0xFC044100+((x)*0x001)) -+#define MCF_EDMA_TCD_SADDR(x) MCF_REG32(0xFC045000+((x)*0x020)) -+#define MCF_EDMA_TCD_ATTR(x) MCF_REG16(0xFC045004+((x)*0x020)) -+#define MCF_EDMA_TCD_SOFF(x) MCF_REG16(0xFC045006+((x)*0x020)) -+#define MCF_EDMA_TCD_NBYTES(x) MCF_REG32(0xFC045008+((x)*0x020)) -+#define MCF_EDMA_TCD_SLAST(x) MCF_REG32(0xFC04500C+((x)*0x020)) -+#define MCF_EDMA_TCD_DADDR(x) MCF_REG32(0xFC045010+((x)*0x020)) -+#define MCF_EDMA_TCD_CITER_ELINK(x) MCF_REG16(0xFC045014+((x)*0x020)) -+#define MCF_EDMA_TCD_CITER(x) MCF_REG16(0xFC045014+((x)*0x020)) -+#define MCF_EDMA_TCD_DOFF(x) MCF_REG16(0xFC045016+((x)*0x020)) -+#define MCF_EDMA_TCD_DLAST_SGA(x) MCF_REG32(0xFC045018+((x)*0x020)) -+#define MCF_EDMA_TCD_BITER_ELINK(x) MCF_REG16(0xFC04501C+((x)*0x020)) -+#define MCF_EDMA_TCD_BITER(x) MCF_REG16(0xFC04501C+((x)*0x020)) -+#define MCF_EDMA_TCD_CSR(x) MCF_REG16(0xFC04501e +((x)*0x020)) -+ -+/* Bit definitions and macros for CR */ -+#define MCF_EDMA_CR_EDBG (0x00000002) -+#define MCF_EDMA_CR_ERCA (0x00000004) -+ -+/* Bit definitions and macros for ES */ -+#define MCF_EDMA_ES_DBE (0x00000001) -+#define MCF_EDMA_ES_SBE (0x00000002) -+#define MCF_EDMA_ES_SGE (0x00000004) -+#define MCF_EDMA_ES_NCE (0x00000008) -+#define MCF_EDMA_ES_DOE (0x00000010) -+#define MCF_EDMA_ES_DAE (0x00000020) -+#define MCF_EDMA_ES_SOE (0x00000040) -+#define MCF_EDMA_ES_SAE (0x00000080) -+#define MCF_EDMA_ES_ERRCHN(x) (((x)&0x0000000F)<<8) -+#define MCF_EDMA_ES_CPE (0x00004000) -+#define MCF_EDMA_ES_VLD (0x80000000) -+ -+/* Bit definitions and macros for ERQ */ -+#define MCF_EDMA_ERQ_ERQ0 (0x0001) -+#define MCF_EDMA_ERQ_ERQ1 (0x0002) -+#define MCF_EDMA_ERQ_ERQ2 (0x0004) -+#define MCF_EDMA_ERQ_ERQ3 (0x0008) -+#define MCF_EDMA_ERQ_ERQ4 (0x0010) -+#define MCF_EDMA_ERQ_ERQ5 (0x0020) -+#define MCF_EDMA_ERQ_ERQ6 (0x0040) -+#define MCF_EDMA_ERQ_ERQ7 (0x0080) -+#define MCF_EDMA_ERQ_ERQ8 (0x0100) -+#define MCF_EDMA_ERQ_ERQ9 (0x0200) -+#define MCF_EDMA_ERQ_ERQ10 (0x0400) -+#define MCF_EDMA_ERQ_ERQ11 (0x0800) -+#define MCF_EDMA_ERQ_ERQ12 (0x1000) -+#define MCF_EDMA_ERQ_ERQ13 (0x2000) -+#define MCF_EDMA_ERQ_ERQ14 (0x4000) -+#define MCF_EDMA_ERQ_ERQ15 (0x8000) -+ -+/* Bit definitions and macros for EEI */ -+#define MCF_EDMA_EEI_EEI0 (0x0001) -+#define MCF_EDMA_EEI_EEI1 (0x0002) -+#define MCF_EDMA_EEI_EEI2 (0x0004) -+#define MCF_EDMA_EEI_EEI3 (0x0008) -+#define MCF_EDMA_EEI_EEI4 (0x0010) -+#define MCF_EDMA_EEI_EEI5 (0x0020) -+#define MCF_EDMA_EEI_EEI6 (0x0040) -+#define MCF_EDMA_EEI_EEI7 (0x0080) -+#define MCF_EDMA_EEI_EEI8 (0x0100) -+#define MCF_EDMA_EEI_EEI9 (0x0200) -+#define MCF_EDMA_EEI_EEI10 (0x0400) -+#define MCF_EDMA_EEI_EEI11 (0x0800) -+#define MCF_EDMA_EEI_EEI12 (0x1000) -+#define MCF_EDMA_EEI_EEI13 (0x2000) -+#define MCF_EDMA_EEI_EEI14 (0x4000) -+#define MCF_EDMA_EEI_EEI15 (0x8000) -+ -+/* Bit definitions and macros for SERQ */ -+#define MCF_EDMA_SERQ_SERQ(x) (((x)&0x0F)) -+#define MCF_EDMA_SERQ_SAER (0x40) -+ -+/* Bit definitions and macros for CERQ */ -+#define MCF_EDMA_CERQ_CERQ(x) (((x)&0x0F)) -+#define MCF_EDMA_CERQ_CAER (0x40) -+ -+/* Bit definitions and macros for SEEI */ -+#define MCF_EDMA_SEEI_SEEI(x) (((x)&0x0F)) -+#define MCF_EDMA_SEEI_SAEE (0x40) -+ -+/* Bit definitions and macros for CEEI */ -+#define MCF_EDMA_CEEI_CEEI(x) (((x)&0x0F)) -+#define MCF_EDMA_CEEI_CAEE (0x40) -+ -+/* Bit definitions and macros for CINT */ -+#define MCF_EDMA_CINT_CINT(x) (((x)&0x0F)) -+#define MCF_EDMA_CINT_CAIR (0x40) -+ -+/* Bit definitions and macros for CERR */ -+#define MCF_EDMA_CERR_CERR(x) (((x)&0x0F)) -+#define MCF_EDMA_CERR_CAER (0x40) -+ -+/* Bit definitions and macros for SSRT */ -+#define MCF_EDMA_SSRT_SSRT(x) (((x)&0x0F)) -+#define MCF_EDMA_SSRT_SAST (0x40) -+ -+/* Bit definitions and macros for CDNE */ -+#define MCF_EDMA_CDNE_CDNE(x) (((x)&0x0F)) -+#define MCF_EDMA_CDNE_CADN (0x40) -+ -+/* Bit definitions and macros for INTR */ -+#define MCF_EDMA_INTR_INT0 (0x0001) -+#define MCF_EDMA_INTR_INT1 (0x0002) -+#define MCF_EDMA_INTR_INT2 (0x0004) -+#define MCF_EDMA_INTR_INT3 (0x0008) -+#define MCF_EDMA_INTR_INT4 (0x0010) -+#define MCF_EDMA_INTR_INT5 (0x0020) -+#define MCF_EDMA_INTR_INT6 (0x0040) -+#define MCF_EDMA_INTR_INT7 (0x0080) -+#define MCF_EDMA_INTR_INT8 (0x0100) -+#define MCF_EDMA_INTR_INT9 (0x0200) -+#define MCF_EDMA_INTR_INT10 (0x0400) -+#define MCF_EDMA_INTR_INT11 (0x0800) -+#define MCF_EDMA_INTR_INT12 (0x1000) -+#define MCF_EDMA_INTR_INT13 (0x2000) -+#define MCF_EDMA_INTR_INT14 (0x4000) -+#define MCF_EDMA_INTR_INT15 (0x8000) -+ -+/* Bit definitions and macros for ERR */ -+#define MCF_EDMA_ERR_ERR0 (0x0001) -+#define MCF_EDMA_ERR_ERR1 (0x0002) -+#define MCF_EDMA_ERR_ERR2 (0x0004) -+#define MCF_EDMA_ERR_ERR3 (0x0008) -+#define MCF_EDMA_ERR_ERR4 (0x0010) -+#define MCF_EDMA_ERR_ERR5 (0x0020) -+#define MCF_EDMA_ERR_ERR6 (0x0040) -+#define MCF_EDMA_ERR_ERR7 (0x0080) -+#define MCF_EDMA_ERR_ERR8 (0x0100) -+#define MCF_EDMA_ERR_ERR9 (0x0200) -+#define MCF_EDMA_ERR_ERR10 (0x0400) -+#define MCF_EDMA_ERR_ERR11 (0x0800) -+#define MCF_EDMA_ERR_ERR12 (0x1000) -+#define MCF_EDMA_ERR_ERR13 (0x2000) -+#define MCF_EDMA_ERR_ERR14 (0x4000) -+#define MCF_EDMA_ERR_ERR15 (0x8000) -+ -+/* Bit definitions and macros for DCHPRI group */ -+#define MCF_EDMA_DCHPRI_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI0 */ -+#define MCF_EDMA_DCHPRI0_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI0_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI1 */ -+#define MCF_EDMA_DCHPRI1_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI1_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI2 */ -+#define MCF_EDMA_DCHPRI2_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI2_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI3 */ -+#define MCF_EDMA_DCHPRI3_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI3_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI4 */ -+#define MCF_EDMA_DCHPRI4_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI4_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI5 */ -+#define MCF_EDMA_DCHPRI5_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI5_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI6 */ -+#define MCF_EDMA_DCHPRI6_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI6_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI7 */ -+#define MCF_EDMA_DCHPRI7_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI7_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI8 */ -+#define MCF_EDMA_DCHPRI8_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI8_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI9 */ -+#define MCF_EDMA_DCHPRI9_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI9_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI10 */ -+#define MCF_EDMA_DCHPRI10_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI10_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI11 */ -+#define MCF_EDMA_DCHPRI11_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI11_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI12 */ -+#define MCF_EDMA_DCHPRI12_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI12_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI13 */ -+#define MCF_EDMA_DCHPRI13_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI13_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI14 */ -+#define MCF_EDMA_DCHPRI14_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI14_ECP (0x80) -+ -+/* Bit definitions and macros for DCHPRI15 */ -+#define MCF_EDMA_DCHPRI15_CHPRI(x) (((x)&0x0F)) -+#define MCF_EDMA_DCHPRI15_ECP (0x80) -+ -+/* Bit definitions and macros for TCD_SADDR group */ -+#define MCF_EDMA_TCD_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD0_SADDR */ -+#define MCF_EDMA_TCD0_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD_ATTR group */ -+#define MCF_EDMA_TCD_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD_ATTR_SMOD(x) (((x)&0x001F)<<11) -+#define MCF_EDMA_TCD_ATTR_SSIZE_8BIT (0x0000) -+#define MCF_EDMA_TCD_ATTR_SSIZE_16BIT (0x0100) -+#define MCF_EDMA_TCD_ATTR_SSIZE_32BIT (0x0200) -+#define MCF_EDMA_TCD_ATTR_SSIZE_16BYTE (0x0400) -+#define MCF_EDMA_TCD_ATTR_DSIZE_8BIT (0x0000) -+#define MCF_EDMA_TCD_ATTR_DSIZE_16BIT (0x0001) -+#define MCF_EDMA_TCD_ATTR_DSIZE_32BIT (0x0002) -+#define MCF_EDMA_TCD_ATTR_DSIZE_16BYTE (0x0004) -+ -+/* Bit definitions and macros for TCD0_ATTR */ -+#define MCF_EDMA_TCD0_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD0_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD0_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD0_ATTR_SMOD(x) (((x)&0x001F)<<11) -+#define MCF_EDMA_TCD0_ATTR_SSIZE_8BIT (0x0000) -+#define MCF_EDMA_TCD0_ATTR_SSIZE_16BIT (0x0100) -+#define MCF_EDMA_TCD0_ATTR_SSIZE_32BIT (0x0200) -+#define MCF_EDMA_TCD0_ATTR_SSIZE_16BYTE (0x0400) -+#define MCF_EDMA_TCD0_ATTR_DSIZE_8BIT (0x0000) -+#define MCF_EDMA_TCD0_ATTR_DSIZE_16BIT (0x0001) -+#define MCF_EDMA_TCD0_ATTR_DSIZE_32BIT (0x0002) -+#define MCF_EDMA_TCD0_ATTR_DSIZE_16BYTE (0x0004) -+ -+/* Bit definitions and macros for TCD_SOFF group */ -+#define MCF_EDMA_TCD_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD0_SOFF */ -+#define MCF_EDMA_TCD0_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD_NBYTES group */ -+#define MCF_EDMA_TCD_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD0_NBYTES */ -+#define MCF_EDMA_TCD0_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD_SLAST group */ -+#define MCF_EDMA_TCD_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD0_SLAST */ -+#define MCF_EDMA_TCD0_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD_DADDR group */ -+#define MCF_EDMA_TCD_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD0_DADDR */ -+#define MCF_EDMA_TCD0_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD_CITER_ELINK group */ -+#define MCF_EDMA_TCD_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD0_CITER_ELINK */ -+#define MCF_EDMA_TCD0_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD0_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD0_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD_CITER group */ -+#define MCF_EDMA_TCD_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD0_CITER */ -+#define MCF_EDMA_TCD0_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD0_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD_DOFF group */ -+#define MCF_EDMA_TCD_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD0_DOFF */ -+#define MCF_EDMA_TCD0_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD_DLAST_SGA group */ -+#define MCF_EDMA_TCD_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD0_DLAST_SGA */ -+#define MCF_EDMA_TCD0_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD_BITER_ELINK group */ -+#define MCF_EDMA_TCD_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD0_BITER_ELINK */ -+#define MCF_EDMA_TCD0_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD0_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD0_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD_BITER group */ -+#define MCF_EDMA_TCD_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD0_BITER */ -+#define MCF_EDMA_TCD0_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD0_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD_CSR group */ -+#define MCF_EDMA_TCD_CSR_START (0x0001) -+#define MCF_EDMA_TCD_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD_CSR_BWC(x) (((x)&0x0003)<<14) -+#define MCF_EDMA_TCD_CSR_BWC_NO_STALL (0x0000) -+#define MCF_EDMA_TCD_CSR_BWC_4CYC_STALL (0x8000) -+#define MCF_EDMA_TCD_CSR_BWC_8CYC_STALL (0xC000) -+ -+/* Bit definitions and macros for TCD0_CSR */ -+#define MCF_EDMA_TCD0_CSR_START (0x0001) -+#define MCF_EDMA_TCD0_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD0_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD0_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD0_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD0_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD0_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD0_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD0_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD0_CSR_BWC(x) (((x)&0x0003)<<14) -+#define MCF_EDMA_TCD0_CSR_BWC_NO_STALL (0x0000) -+#define MCF_EDMA_TCD0_CSR_BWC_4CYC_STALL (0x8000) -+#define MCF_EDMA_TCD0_CSR_BWC_8CYC_STALL (0xC000) -+ -+/* Bit definitions and macros for TCD1_SADDR */ -+#define MCF_EDMA_TCD1_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD1_ATTR */ -+#define MCF_EDMA_TCD1_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD1_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD1_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD1_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD1_SOFF */ -+#define MCF_EDMA_TCD1_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD1_NBYTES */ -+#define MCF_EDMA_TCD1_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD1_SLAST */ -+#define MCF_EDMA_TCD1_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD1_DADDR */ -+#define MCF_EDMA_TCD1_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD1_CITER_ELINK */ -+#define MCF_EDMA_TCD1_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD1_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD1_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD1_CITER */ -+#define MCF_EDMA_TCD1_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD1_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD1_DOFF */ -+#define MCF_EDMA_TCD1_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD1_DLAST_SGA */ -+#define MCF_EDMA_TCD1_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD1_BITER */ -+#define MCF_EDMA_TCD1_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD1_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD1_BITER_ELINK */ -+#define MCF_EDMA_TCD1_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD1_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD1_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD1_CSR */ -+#define MCF_EDMA_TCD1_CSR_START (0x0001) -+#define MCF_EDMA_TCD1_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD1_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD1_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD1_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD1_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD1_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD1_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD1_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD1_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD2_SADDR */ -+#define MCF_EDMA_TCD2_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD2_ATTR */ -+#define MCF_EDMA_TCD2_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD2_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD2_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD2_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD2_SOFF */ -+#define MCF_EDMA_TCD2_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD2_NBYTES */ -+#define MCF_EDMA_TCD2_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD2_SLAST */ -+#define MCF_EDMA_TCD2_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD2_DADDR */ -+#define MCF_EDMA_TCD2_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD2_CITER */ -+#define MCF_EDMA_TCD2_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD2_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD2_CITER_ELINK */ -+#define MCF_EDMA_TCD2_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD2_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD2_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD2_DOFF */ -+#define MCF_EDMA_TCD2_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD2_DLAST_SGA */ -+#define MCF_EDMA_TCD2_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD2_BITER_ELINK */ -+#define MCF_EDMA_TCD2_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD2_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD2_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD2_BITER */ -+#define MCF_EDMA_TCD2_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD2_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD2_CSR */ -+#define MCF_EDMA_TCD2_CSR_START (0x0001) -+#define MCF_EDMA_TCD2_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD2_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD2_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD2_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD2_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD2_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD2_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD2_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD2_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD3_SADDR */ -+#define MCF_EDMA_TCD3_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD3_ATTR */ -+#define MCF_EDMA_TCD3_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD3_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD3_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD3_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD3_SOFF */ -+#define MCF_EDMA_TCD3_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD3_NBYTES */ -+#define MCF_EDMA_TCD3_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD3_SLAST */ -+#define MCF_EDMA_TCD3_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD3_DADDR */ -+#define MCF_EDMA_TCD3_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD3_CITER */ -+#define MCF_EDMA_TCD3_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD3_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD3_CITER_ELINK */ -+#define MCF_EDMA_TCD3_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD3_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD3_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD3_DOFF */ -+#define MCF_EDMA_TCD3_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD3_DLAST_SGA */ -+#define MCF_EDMA_TCD3_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD3_BITER_ELINK */ -+#define MCF_EDMA_TCD3_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD3_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD3_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD3_BITER */ -+#define MCF_EDMA_TCD3_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD3_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD3_CSR */ -+#define MCF_EDMA_TCD3_CSR_START (0x0001) -+#define MCF_EDMA_TCD3_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD3_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD3_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD3_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD3_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD3_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD3_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD3_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD3_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD4_SADDR */ -+#define MCF_EDMA_TCD4_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD4_ATTR */ -+#define MCF_EDMA_TCD4_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD4_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD4_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD4_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD4_SOFF */ -+#define MCF_EDMA_TCD4_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD4_NBYTES */ -+#define MCF_EDMA_TCD4_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD4_SLAST */ -+#define MCF_EDMA_TCD4_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD4_DADDR */ -+#define MCF_EDMA_TCD4_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD4_CITER */ -+#define MCF_EDMA_TCD4_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD4_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD4_CITER_ELINK */ -+#define MCF_EDMA_TCD4_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD4_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD4_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD4_DOFF */ -+#define MCF_EDMA_TCD4_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD4_DLAST_SGA */ -+#define MCF_EDMA_TCD4_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD4_BITER */ -+#define MCF_EDMA_TCD4_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD4_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD4_BITER_ELINK */ -+#define MCF_EDMA_TCD4_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD4_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD4_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD4_CSR */ -+#define MCF_EDMA_TCD4_CSR_START (0x0001) -+#define MCF_EDMA_TCD4_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD4_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD4_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD4_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD4_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD4_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD4_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD4_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD4_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD5_SADDR */ -+#define MCF_EDMA_TCD5_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD5_ATTR */ -+#define MCF_EDMA_TCD5_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD5_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD5_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD5_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD5_SOFF */ -+#define MCF_EDMA_TCD5_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD5_NBYTES */ -+#define MCF_EDMA_TCD5_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD5_SLAST */ -+#define MCF_EDMA_TCD5_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD5_DADDR */ -+#define MCF_EDMA_TCD5_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD5_CITER */ -+#define MCF_EDMA_TCD5_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD5_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD5_CITER_ELINK */ -+#define MCF_EDMA_TCD5_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD5_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD5_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD5_DOFF */ -+#define MCF_EDMA_TCD5_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD5_DLAST_SGA */ -+#define MCF_EDMA_TCD5_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD5_BITER_ELINK */ -+#define MCF_EDMA_TCD5_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD5_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD5_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD5_BITER */ -+#define MCF_EDMA_TCD5_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD5_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD5_CSR */ -+#define MCF_EDMA_TCD5_CSR_START (0x0001) -+#define MCF_EDMA_TCD5_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD5_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD5_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD5_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD5_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD5_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD5_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD5_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD5_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD6_SADDR */ -+#define MCF_EDMA_TCD6_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD6_ATTR */ -+#define MCF_EDMA_TCD6_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD6_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD6_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD6_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD6_SOFF */ -+#define MCF_EDMA_TCD6_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD6_NBYTES */ -+#define MCF_EDMA_TCD6_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD6_SLAST */ -+#define MCF_EDMA_TCD6_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD6_DADDR */ -+#define MCF_EDMA_TCD6_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD6_CITER */ -+#define MCF_EDMA_TCD6_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD6_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD6_CITER_ELINK */ -+#define MCF_EDMA_TCD6_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD6_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD6_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD6_DOFF */ -+#define MCF_EDMA_TCD6_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD6_DLAST_SGA */ -+#define MCF_EDMA_TCD6_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD6_BITER_ELINK */ -+#define MCF_EDMA_TCD6_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD6_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD6_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD6_BITER */ -+#define MCF_EDMA_TCD6_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD6_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD6_CSR */ -+#define MCF_EDMA_TCD6_CSR_START (0x0001) -+#define MCF_EDMA_TCD6_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD6_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD6_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD6_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD6_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD6_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD6_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD6_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD6_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD7_SADDR */ -+#define MCF_EDMA_TCD7_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD7_ATTR */ -+#define MCF_EDMA_TCD7_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD7_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD7_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD7_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD7_SOFF */ -+#define MCF_EDMA_TCD7_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD7_NBYTES */ -+#define MCF_EDMA_TCD7_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD7_SLAST */ -+#define MCF_EDMA_TCD7_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD7_DADDR */ -+#define MCF_EDMA_TCD7_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD7_CITER */ -+#define MCF_EDMA_TCD7_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD7_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD7_CITER_ELINK */ -+#define MCF_EDMA_TCD7_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD7_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD7_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD7_DOFF */ -+#define MCF_EDMA_TCD7_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD7_DLAST_SGA */ -+#define MCF_EDMA_TCD7_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD7_BITER_ELINK */ -+#define MCF_EDMA_TCD7_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD7_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD7_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD7_BITER */ -+#define MCF_EDMA_TCD7_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD7_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD7_CSR */ -+#define MCF_EDMA_TCD7_CSR_START (0x0001) -+#define MCF_EDMA_TCD7_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD7_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD7_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD7_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD7_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD7_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD7_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD7_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD7_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD8_SADDR */ -+#define MCF_EDMA_TCD8_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD8_ATTR */ -+#define MCF_EDMA_TCD8_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD8_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD8_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD8_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD8_SOFF */ -+#define MCF_EDMA_TCD8_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD8_NBYTES */ -+#define MCF_EDMA_TCD8_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD8_SLAST */ -+#define MCF_EDMA_TCD8_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD8_DADDR */ -+#define MCF_EDMA_TCD8_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD8_CITER */ -+#define MCF_EDMA_TCD8_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD8_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD8_CITER_ELINK */ -+#define MCF_EDMA_TCD8_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD8_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD8_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD8_DOFF */ -+#define MCF_EDMA_TCD8_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD8_DLAST_SGA */ -+#define MCF_EDMA_TCD8_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD8_BITER_ELINK */ -+#define MCF_EDMA_TCD8_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD8_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD8_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD8_BITER */ -+#define MCF_EDMA_TCD8_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD8_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD8_CSR */ -+#define MCF_EDMA_TCD8_CSR_START (0x0001) -+#define MCF_EDMA_TCD8_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD8_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD8_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD8_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD8_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD8_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD8_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD8_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD8_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD9_SADDR */ -+#define MCF_EDMA_TCD9_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD9_ATTR */ -+#define MCF_EDMA_TCD9_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD9_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD9_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD9_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD9_SOFF */ -+#define MCF_EDMA_TCD9_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD9_NBYTES */ -+#define MCF_EDMA_TCD9_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD9_SLAST */ -+#define MCF_EDMA_TCD9_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD9_DADDR */ -+#define MCF_EDMA_TCD9_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD9_CITER_ELINK */ -+#define MCF_EDMA_TCD9_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD9_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD9_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD9_CITER */ -+#define MCF_EDMA_TCD9_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD9_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD9_DOFF */ -+#define MCF_EDMA_TCD9_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD9_DLAST_SGA */ -+#define MCF_EDMA_TCD9_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD9_BITER_ELINK */ -+#define MCF_EDMA_TCD9_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD9_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD9_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD9_BITER */ -+#define MCF_EDMA_TCD9_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD9_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD9_CSR */ -+#define MCF_EDMA_TCD9_CSR_START (0x0001) -+#define MCF_EDMA_TCD9_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD9_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD9_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD9_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD9_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD9_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD9_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD9_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD9_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD10_SADDR */ -+#define MCF_EDMA_TCD10_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD10_ATTR */ -+#define MCF_EDMA_TCD10_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD10_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD10_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD10_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD10_SOFF */ -+#define MCF_EDMA_TCD10_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD10_NBYTES */ -+#define MCF_EDMA_TCD10_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD10_SLAST */ -+#define MCF_EDMA_TCD10_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD10_DADDR */ -+#define MCF_EDMA_TCD10_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD10_CITER_ELINK */ -+#define MCF_EDMA_TCD10_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD10_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD10_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD10_CITER */ -+#define MCF_EDMA_TCD10_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD10_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD10_DOFF */ -+#define MCF_EDMA_TCD10_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD10_DLAST_SGA */ -+#define MCF_EDMA_TCD10_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD10_BITER */ -+#define MCF_EDMA_TCD10_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD10_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD10_BITER_ELINK */ -+#define MCF_EDMA_TCD10_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD10_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD10_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD10_CSR */ -+#define MCF_EDMA_TCD10_CSR_START (0x0001) -+#define MCF_EDMA_TCD10_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD10_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD10_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD10_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD10_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD10_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD10_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD10_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD10_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD11_SADDR */ -+#define MCF_EDMA_TCD11_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD11_ATTR */ -+#define MCF_EDMA_TCD11_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD11_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD11_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD11_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD11_SOFF */ -+#define MCF_EDMA_TCD11_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD11_NBYTES */ -+#define MCF_EDMA_TCD11_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD11_SLAST */ -+#define MCF_EDMA_TCD11_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD11_DADDR */ -+#define MCF_EDMA_TCD11_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD11_CITER */ -+#define MCF_EDMA_TCD11_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD11_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD11_CITER_ELINK */ -+#define MCF_EDMA_TCD11_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD11_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD11_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD11_DOFF */ -+#define MCF_EDMA_TCD11_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD11_DLAST_SGA */ -+#define MCF_EDMA_TCD11_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD11_BITER */ -+#define MCF_EDMA_TCD11_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD11_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD11_BITER_ELINK */ -+#define MCF_EDMA_TCD11_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD11_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD11_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD11_CSR */ -+#define MCF_EDMA_TCD11_CSR_START (0x0001) -+#define MCF_EDMA_TCD11_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD11_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD11_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD11_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD11_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD11_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD11_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD11_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD11_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD12_SADDR */ -+#define MCF_EDMA_TCD12_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD12_ATTR */ -+#define MCF_EDMA_TCD12_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD12_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD12_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD12_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD12_SOFF */ -+#define MCF_EDMA_TCD12_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD12_NBYTES */ -+#define MCF_EDMA_TCD12_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD12_SLAST */ -+#define MCF_EDMA_TCD12_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD12_DADDR */ -+#define MCF_EDMA_TCD12_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD12_CITER */ -+#define MCF_EDMA_TCD12_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD12_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD12_CITER_ELINK */ -+#define MCF_EDMA_TCD12_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD12_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD12_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD12_DOFF */ -+#define MCF_EDMA_TCD12_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD12_DLAST_SGA */ -+#define MCF_EDMA_TCD12_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD12_BITER */ -+#define MCF_EDMA_TCD12_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD12_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD12_BITER_ELINK */ -+#define MCF_EDMA_TCD12_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD12_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD12_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD12_CSR */ -+#define MCF_EDMA_TCD12_CSR_START (0x0001) -+#define MCF_EDMA_TCD12_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD12_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD12_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD12_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD12_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD12_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD12_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD12_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD12_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD13_SADDR */ -+#define MCF_EDMA_TCD13_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD13_ATTR */ -+#define MCF_EDMA_TCD13_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD13_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD13_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD13_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD13_SOFF */ -+#define MCF_EDMA_TCD13_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD13_NBYTES */ -+#define MCF_EDMA_TCD13_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD13_SLAST */ -+#define MCF_EDMA_TCD13_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD13_DADDR */ -+#define MCF_EDMA_TCD13_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD13_CITER_ELINK */ -+#define MCF_EDMA_TCD13_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD13_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD13_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD13_CITER */ -+#define MCF_EDMA_TCD13_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD13_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD13_DOFF */ -+#define MCF_EDMA_TCD13_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD13_DLAST_SGA */ -+#define MCF_EDMA_TCD13_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD13_BITER_ELINK */ -+#define MCF_EDMA_TCD13_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD13_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD13_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD13_BITER */ -+#define MCF_EDMA_TCD13_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD13_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD13_CSR */ -+#define MCF_EDMA_TCD13_CSR_START (0x0001) -+#define MCF_EDMA_TCD13_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD13_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD13_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD13_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD13_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD13_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD13_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD13_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD13_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD14_SADDR */ -+#define MCF_EDMA_TCD14_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD14_ATTR */ -+#define MCF_EDMA_TCD14_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD14_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD14_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD14_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD14_SOFF */ -+#define MCF_EDMA_TCD14_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD14_NBYTES */ -+#define MCF_EDMA_TCD14_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD14_SLAST */ -+#define MCF_EDMA_TCD14_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD14_DADDR */ -+#define MCF_EDMA_TCD14_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD14_CITER */ -+#define MCF_EDMA_TCD14_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD14_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD14_CITER_ELINK */ -+#define MCF_EDMA_TCD14_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD14_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD14_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD14_DOFF */ -+#define MCF_EDMA_TCD14_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD14_DLAST_SGA */ -+#define MCF_EDMA_TCD14_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD14_BITER_ELINK */ -+#define MCF_EDMA_TCD14_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD14_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD14_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD14_BITER */ -+#define MCF_EDMA_TCD14_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD14_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD14_CSR */ -+#define MCF_EDMA_TCD14_CSR_START (0x0001) -+#define MCF_EDMA_TCD14_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD14_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD14_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD14_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD14_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD14_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD14_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD14_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD14_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+/* Bit definitions and macros for TCD15_SADDR */ -+#define MCF_EDMA_TCD15_SADDR_SADDR(x) (x) -+ -+/* Bit definitions and macros for TCD15_ATTR */ -+#define MCF_EDMA_TCD15_ATTR_DSIZE(x) (((x)&0x0007)) -+#define MCF_EDMA_TCD15_ATTR_DMOD(x) (((x)&0x001F)<<3) -+#define MCF_EDMA_TCD15_ATTR_SSIZE(x) (((x)&0x0007)<<8) -+#define MCF_EDMA_TCD15_ATTR_SMOD(x) (((x)&0x001F)<<11) -+ -+/* Bit definitions and macros for TCD15_SOFF */ -+#define MCF_EDMA_TCD15_SOFF_SOFF(x) (x) -+ -+/* Bit definitions and macros for TCD15_NBYTES */ -+#define MCF_EDMA_TCD15_NBYTES_NBYTES(x) (x) -+ -+/* Bit definitions and macros for TCD15_SLAST */ -+#define MCF_EDMA_TCD15_SLAST_SLAST(x) (x) -+ -+/* Bit definitions and macros for TCD15_DADDR */ -+#define MCF_EDMA_TCD15_DADDR_DADDR(x) (x) -+ -+/* Bit definitions and macros for TCD15_CITER_ELINK */ -+#define MCF_EDMA_TCD15_CITER_ELINK_CITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD15_CITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD15_CITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD15_CITER */ -+#define MCF_EDMA_TCD15_CITER_CITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD15_CITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD15_DOFF */ -+#define MCF_EDMA_TCD15_DOFF_DOFF(x) (x) -+ -+/* Bit definitions and macros for TCD15_DLAST_SGA */ -+#define MCF_EDMA_TCD15_DLAST_SGA_DLAST_SGA(x) (x) -+ -+/* Bit definitions and macros for TCD15_BITER */ -+#define MCF_EDMA_TCD15_BITER_BITER(x) (((x)&0x7FFF)) -+#define MCF_EDMA_TCD15_BITER_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD15_BITER_ELINK */ -+#define MCF_EDMA_TCD15_BITER_ELINK_BITER(x) (((x)&0x01FF)) -+#define MCF_EDMA_TCD15_BITER_ELINK_LINKCH(x) (((x)&0x003F)<<9) -+#define MCF_EDMA_TCD15_BITER_ELINK_E_LINK (0x8000) -+ -+/* Bit definitions and macros for TCD15_CSR */ -+#define MCF_EDMA_TCD15_CSR_START (0x0001) -+#define MCF_EDMA_TCD15_CSR_INT_MAJOR (0x0002) -+#define MCF_EDMA_TCD15_CSR_INT_HALF (0x0004) -+#define MCF_EDMA_TCD15_CSR_D_REQ (0x0008) -+#define MCF_EDMA_TCD15_CSR_E_SG (0x0010) -+#define MCF_EDMA_TCD15_CSR_E_LINK (0x0020) -+#define MCF_EDMA_TCD15_CSR_ACTIVE (0x0040) -+#define MCF_EDMA_TCD15_CSR_DONE (0x0080) -+#define MCF_EDMA_TCD15_CSR_LINKCH(x) (((x)&0x003F)<<8) -+#define MCF_EDMA_TCD15_CSR_BWC(x) (((x)&0x0003)<<14) -+ -+#endif /* __MCF5445X_EDMA_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_eport.h -@@ -0,0 +1,117 @@ -+/* -+ * Kurt Mahan kmahan@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_EPORT_H__ -+#define __MCF5445X_EPORT_H__ -+ -+/********************************************************************* -+* -+* Edge Port Module (EPORT) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) -+#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) -+#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) -+#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) -+#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) -+#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) -+ -+/* Bit definitions and macros for EPPAR */ -+#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) -+#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) -+#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) -+#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) -+#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) -+#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) -+#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) -+#define MCF_EPORT_EPPAR_LEVEL (0) -+#define MCF_EPORT_EPPAR_RISING (1) -+#define MCF_EPORT_EPPAR_FALLING (2) -+#define MCF_EPORT_EPPAR_BOTH (3) -+#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) -+#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) -+#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) -+#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) -+#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) -+#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) -+#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) -+#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) -+#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) -+#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) -+#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) -+#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) -+#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) -+#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) -+#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) -+#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) -+#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) -+#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) -+#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) -+#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) -+#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) -+#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) -+#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) -+#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) -+#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) -+#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) -+#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) -+#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) -+ -+/* Bit definitions and macros for EPDDR */ -+#define MCF_EPORT_EPDDR_EPDD1 (0x02) -+#define MCF_EPORT_EPDDR_EPDD2 (0x04) -+#define MCF_EPORT_EPDDR_EPDD3 (0x08) -+#define MCF_EPORT_EPDDR_EPDD4 (0x10) -+#define MCF_EPORT_EPDDR_EPDD5 (0x20) -+#define MCF_EPORT_EPDDR_EPDD6 (0x40) -+#define MCF_EPORT_EPDDR_EPDD7 (0x80) -+ -+/* Bit definitions and macros for EPIER */ -+#define MCF_EPORT_EPIER_EPIE1 (0x02) -+#define MCF_EPORT_EPIER_EPIE2 (0x04) -+#define MCF_EPORT_EPIER_EPIE3 (0x08) -+#define MCF_EPORT_EPIER_EPIE4 (0x10) -+#define MCF_EPORT_EPIER_EPIE5 (0x20) -+#define MCF_EPORT_EPIER_EPIE6 (0x40) -+#define MCF_EPORT_EPIER_EPIE7 (0x80) -+ -+/* Bit definitions and macros for EPDR */ -+#define MCF_EPORT_EPDR_EPD1 (0x02) -+#define MCF_EPORT_EPDR_EPD2 (0x04) -+#define MCF_EPORT_EPDR_EPD3 (0x08) -+#define MCF_EPORT_EPDR_EPD4 (0x10) -+#define MCF_EPORT_EPDR_EPD5 (0x20) -+#define MCF_EPORT_EPDR_EPD6 (0x40) -+#define MCF_EPORT_EPDR_EPD7 (0x80) -+ -+/* Bit definitions and macros for EPPDR */ -+#define MCF_EPORT_EPPDR_EPPD1 (0x02) -+#define MCF_EPORT_EPPDR_EPPD2 (0x04) -+#define MCF_EPORT_EPPDR_EPPD3 (0x08) -+#define MCF_EPORT_EPPDR_EPPD4 (0x10) -+#define MCF_EPORT_EPPDR_EPPD5 (0x20) -+#define MCF_EPORT_EPPDR_EPPD6 (0x40) -+#define MCF_EPORT_EPPDR_EPPD7 (0x80) -+ -+/* Bit definitions and macros for EPFR */ -+#define MCF_EPORT_EPFR_EPF1 (0x02) -+#define MCF_EPORT_EPFR_EPF2 (0x04) -+#define MCF_EPORT_EPFR_EPF3 (0x08) -+#define MCF_EPORT_EPFR_EPF4 (0x10) -+#define MCF_EPORT_EPFR_EPF5 (0x20) -+#define MCF_EPORT_EPFR_EPF6 (0x40) -+#define MCF_EPORT_EPFR_EPF7 (0x80) -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_EPORT_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_fbcs.h -@@ -0,0 +1,182 @@ -+/* -+ * Matt Waddel Matt.Waddel@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_FBCS_H__ -+#define __MCF5445X_FBCS_H__ -+ -+/********************************************************************* -+* -+* FlexBus Chip Selects (FBCS) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_FBCS_CSAR0 MCF_REG32(0xFC008000) /* Chip-select Addr Register */ -+#define MCF_FBCS_CSMR0 MCF_REG32(0xFC008004) /* Chip-select Mask Register */ -+#define MCF_FBCS_CSCR0 MCF_REG32(0xFC008008) /* Chip-select Cntl Register */ -+#define MCF_FBCS_CSAR1 MCF_REG32(0xFC00800C) /* Chip-select Addr Register */ -+#define MCF_FBCS_CSMR1 MCF_REG32(0xFC008010) /* Chip-select Mask Register */ -+#define MCF_FBCS_CSCR1 MCF_REG32(0xFC008014) /* Chip-select Cntl Register */ -+#define MCF_FBCS_CSAR2 MCF_REG32(0xFC008018) /* Chip-select Addr Register */ -+#define MCF_FBCS_CSMR2 MCF_REG32(0xFC00801C) /* Chip-select Mask Register */ -+#define MCF_FBCS_CSCR2 MCF_REG32(0xFC008020) /* Chip-select Cntl Register */ -+#define MCF_FBCS_CSAR3 MCF_REG32(0xFC008024) /* Chip-select Addr Register */ -+#define MCF_FBCS_CSMR3 MCF_REG32(0xFC008028) /* Chip-select Mask Register */ -+#define MCF_FBCS_CSCR3 MCF_REG32(0xFC00802C) /* Chip-select Cntl Register */ -+ -+/* Parameterized register read/write macros for multiple registers */ -+#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) /* Chip-select Addr Register */ -+#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) /* Chip-select Mask Register */ -+#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) /* Chip-select Cntl Register */ -+ -+/* Bit definitions and macros for CSAR group */ -+#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) -+ -+/* Bit definitions and macros for CSAR0 */ -+#define MCF_FBCS_CSAR0_BA(x) ((x)&0xFFFF0000) -+ -+/* Bit definitions and macros for CSMR group */ -+#define MCF_FBCS_CSMR_V (0x00000001) /* Valid bit */ -+#define MCF_FBCS_CSMR_WP (0x00000100) /* Write protect */ -+#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base addr mask */ -+#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000) -+#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000) -+#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000) -+#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000) -+#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000) -+#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000) -+#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000) -+#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000) -+#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000) -+#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000) -+#define MCF_FBCS_CSMR_BAM_8M (0x007F0000) -+#define MCF_FBCS_CSMR_BAM_4M (0x003F0000) -+#define MCF_FBCS_CSMR_BAM_2M (0x001F0000) -+#define MCF_FBCS_CSMR_BAM_1M (0x000F0000) -+#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000) -+#define MCF_FBCS_CSMR_BAM_512K (0x00070000) -+#define MCF_FBCS_CSMR_BAM_256K (0x00030000) -+#define MCF_FBCS_CSMR_BAM_128K (0x00010000) -+#define MCF_FBCS_CSMR_BAM_64K (0x00000000) -+ -+/* Bit definitions and macros for CSMR0 */ -+#define MCF_FBCS_CSMR0_V (0x00000001) /* Valid bit */ -+#define MCF_FBCS_CSMR0_WP (0x00000100) /* Write protect */ -+#define MCF_FBCS_CSMR0_BAM(x) (((x)&0x0000FFFF)<<16) /* Base addr mask */ -+#define MCF_FBCS_CSMR0_BAM_4G (0xFFFF0000) -+#define MCF_FBCS_CSMR0_BAM_2G (0x7FFF0000) -+#define MCF_FBCS_CSMR0_BAM_1G (0x3FFF0000) -+#define MCF_FBCS_CSMR0_BAM_1024M (0x3FFF0000) -+#define MCF_FBCS_CSMR0_BAM_512M (0x1FFF0000) -+#define MCF_FBCS_CSMR0_BAM_256M (0x0FFF0000) -+#define MCF_FBCS_CSMR0_BAM_128M (0x07FF0000) -+#define MCF_FBCS_CSMR0_BAM_64M (0x03FF0000) -+#define MCF_FBCS_CSMR0_BAM_32M (0x01FF0000) -+#define MCF_FBCS_CSMR0_BAM_16M (0x00FF0000) -+#define MCF_FBCS_CSMR0_BAM_8M (0x007F0000) -+#define MCF_FBCS_CSMR0_BAM_4M (0x003F0000) -+#define MCF_FBCS_CSMR0_BAM_2M (0x001F0000) -+#define MCF_FBCS_CSMR0_BAM_1M (0x000F0000) -+#define MCF_FBCS_CSMR0_BAM_1024K (0x000F0000) -+#define MCF_FBCS_CSMR0_BAM_512K (0x00070000) -+#define MCF_FBCS_CSMR0_BAM_256K (0x00030000) -+#define MCF_FBCS_CSMR0_BAM_128K (0x00010000) -+#define MCF_FBCS_CSMR0_BAM_64K (0x00000000) -+ -+/* Bit definitions and macros for CSCR group */ -+#define MCF_FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */ -+#define MCF_FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */ -+#define MCF_FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */ -+#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */ -+#define MCF_FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */ -+#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ -+#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ -+#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ -+#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ -+#define MCF_FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */ -+#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ -+#define MCF_FBCS_CSCR_PS_8 (0x00000040) -+#define MCF_FBCS_CSCR_PS_16 (0x00000080) -+#define MCF_FBCS_CSCR_PS_32 (0x00000000) -+ -+/* Bit definitions and macros for CSCR0 */ -+#define MCF_FBCS_CSCR0_BSTW (0x00000008) /* Burst-write enable */ -+#define MCF_FBCS_CSCR0_BSTR (0x00000010) /* Burst-read enable */ -+#define MCF_FBCS_CSCR0_BEM (0x00000020) /* Byte-enable mode */ -+#define MCF_FBCS_CSCR0_PS(x) (((x)&0x00000003)<<6) /* Port size */ -+#define MCF_FBCS_CSCR0_AA (0x00000100) /* Auto-acknowledge */ -+#define MCF_FBCS_CSCR0_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ -+#define MCF_FBCS_CSCR0_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ -+#define MCF_FBCS_CSCR0_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ -+#define MCF_FBCS_CSCR0_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ -+#define MCF_FBCS_CSCR0_SWSEN (0x00800000) /* Secondary wait state enable */ -+#define MCF_FBCS_CSCR0_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ -+#define MCF_FBCS_CSCR0_PS_8 (0x00000040) -+#define MCF_FBCS_CSCR0_PS_16 (0x00000080) -+#define MCF_FBCS_CSCR0_PS_32 (0x00000000) -+ -+/* Bit definitions and macros for CSMR1 */ -+#define MCF_FBCS_CSMR1_V (0x00000001) /* Valid bit */ -+#define MCF_FBCS_CSMR1_WP (0x00000100) /* Write protect */ -+#define MCF_FBCS_CSMR1_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ -+ -+/* Bit definitions and macros for CSCR1 */ -+#define MCF_FBCS_CSCR1_BSTW (0x00000008) /* Burst-write enable */ -+#define MCF_FBCS_CSCR1_BSTR (0x00000010) /* Burst-read enable */ -+#define MCF_FBCS_CSCR1_BEM (0x00000020) /* Byte-enable mode */ -+#define MCF_FBCS_CSCR1_PS(x) (((x)&0x00000003)<<6) /* Port size */ -+#define MCF_FBCS_CSCR1_AA (0x00000100) /* Auto-acknowledge */ -+#define MCF_FBCS_CSCR1_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ -+#define MCF_FBCS_CSCR1_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ -+#define MCF_FBCS_CSCR1_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ -+#define MCF_FBCS_CSCR1_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ -+#define MCF_FBCS_CSCR1_SWSEN (0x00800000) /* Secondary wait state enable */ -+#define MCF_FBCS_CSCR1_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ -+ -+/* Bit definitions and macros for CSMR2 */ -+#define MCF_FBCS_CSMR2_V (0x00000001) /* Valid bit */ -+#define MCF_FBCS_CSMR2_WP (0x00000100) /* Write protect */ -+#define MCF_FBCS_CSMR2_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ -+ -+/* Bit definitions and macros for CSCR2 */ -+#define MCF_FBCS_CSCR2_BSTW (0x00000008) /* Burst-write enable */ -+#define MCF_FBCS_CSCR2_BSTR (0x00000010) /* Burst-read enable */ -+#define MCF_FBCS_CSCR2_BEM (0x00000020) /* Byte-enable mode */ -+#define MCF_FBCS_CSCR2_PS(x) (((x)&0x00000003)<<6) /* Port size */ -+#define MCF_FBCS_CSCR2_AA (0x00000100) /* Auto-acknowledge */ -+#define MCF_FBCS_CSCR2_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ -+#define MCF_FBCS_CSCR2_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ -+#define MCF_FBCS_CSCR2_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ -+#define MCF_FBCS_CSCR2_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ -+#define MCF_FBCS_CSCR2_SWSEN (0x00800000) /* Secondary wait state enable */ -+#define MCF_FBCS_CSCR2_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ -+ -+/* Bit definitions and macros for CSMR3 */ -+#define MCF_FBCS_CSMR3_V (0x00000001) /* Valid bit */ -+#define MCF_FBCS_CSMR3_WP (0x00000100) /* Write protect */ -+#define MCF_FBCS_CSMR3_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ -+ -+/* Bit definitions and macros for CSCR3 */ -+#define MCF_FBCS_CSCR3_BSTW (0x00000008) /* Burst-write enable */ -+#define MCF_FBCS_CSCR3_BSTR (0x00000010) /* Burst-read enable */ -+#define MCF_FBCS_CSCR3_BEM (0x00000020) /* Byte-enable mode */ -+#define MCF_FBCS_CSCR3_PS(x) (((x)&0x00000003)<<6) /* Port size */ -+#define MCF_FBCS_CSCR3_AA (0x00000100) /* Auto-acknowledge */ -+#define MCF_FBCS_CSCR3_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ -+#define MCF_FBCS_CSCR3_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ -+#define MCF_FBCS_CSCR3_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ -+#define MCF_FBCS_CSCR3_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ -+#define MCF_FBCS_CSCR3_SWSEN (0x00800000) /* Secondary wait state enable */ -+#define MCF_FBCS_CSCR3_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_FBCS_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_gpio.h -@@ -0,0 +1,1257 @@ -+/* -+ * Matt Waddel Matt.Waddel@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_GPIO_H__ -+#define __MCF5445X_GPIO_H__ -+ -+/********************************************************************* -+* -+* General Purpose I/O Module (GPIO) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_GPIO_PODR_FEC0H MCF_REG08(0xFC0A4000) /* FEC0 High Port Output Data Register */ -+#define MCF_GPIO_PODR_FEC0L MCF_REG08(0xFC0A4001) /* FEC0 Low Port Output Data Register */ -+#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) /* SSI Port Output Data Register */ -+#define MCF_GPIO_PODR_FBCTL MCF_REG08(0xFC0A4003) /* Flexbus Control Port Output Data Register */ -+#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) /* Flexbus Byte Enable Port Output Data Register */ -+#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) /* Flexbus Chip-Select Port Output Data Register */ -+#define MCF_GPIO_PODR_DMA MCF_REG08(0xFC0A4006) /* DMA Port Output Data Register */ -+#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) /* FEC1 / I2C Port Output Data Register */ -+#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) /* UART Port Output Data Register */ -+#define MCF_GPIO_PODR_DSPI MCF_REG08(0xFC0A400A) /* DSPI Port Output Data Register */ -+#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) /* Timer Port Output Data Register */ -+#define MCF_GPIO_PODR_PCI MCF_REG08(0xFC0A400C) /* PCI Port Output Data Register */ -+#define MCF_GPIO_PODR_USB MCF_REG08(0xFC0A400D) /* USB Port Output Data Register */ -+#define MCF_GPIO_PODR_ATAH MCF_REG08(0xFC0A400E) /* ATA High Port Output Data Register */ -+#define MCF_GPIO_PODR_ATAL MCF_REG08(0xFC0A400F) /* ATA Low Port Output Data Register */ -+#define MCF_GPIO_PODR_FEC1H MCF_REG08(0xFC0A4010) /* FEC1 High Port Output Data Register */ -+#define MCF_GPIO_PODR_FEC1L MCF_REG08(0xFC0A4011) /* FEC1 Low Port Output Data Register */ -+#define MCF_GPIO_PODR_FBADH MCF_REG08(0xFC0A4014) /* Flexbus AD High Port Output Data Register */ -+#define MCF_GPIO_PODR_FBADMH MCF_REG08(0xFC0A4015) /* Flexbus AD Med-High Port Output Data Register */ -+#define MCF_GPIO_PODR_FBADML MCF_REG08(0xFC0A4016) /* Flexbus AD Med-Low Port Output Data Register */ -+#define MCF_GPIO_PODR_FBADL MCF_REG08(0xFC0A4017) /* Flexbus AD Low Port Output Data Register */ -+#define MCF_GPIO_PDDR_FEC0H MCF_REG08(0xFC0A4018) /* FEC0 High Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FEC0L MCF_REG08(0xFC0A4019) /* FEC0 Low Port Data Direction Register */ -+#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A401A) /* SSI Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FBCTL MCF_REG08(0xFC0A401B) /* Flexbus Control Port Data Direction Register */ -+#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A401C) /* Flexbus Byte Enable Port Data Direction Register */ -+#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A401D) /* Flexbus Chip-Select Port Data Direction Register */ -+#define MCF_GPIO_PDDR_DMA MCF_REG08(0xFC0A401E) /* DMA Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401F) /* FEC1 / I2C Port Data Direction Register */ -+#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A4021) /* UART Port Data Direction Register */ -+#define MCF_GPIO_PDDR_DSPI MCF_REG08(0xFC0A4022) /* DSPI Port Data Direction Register */ -+#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A4023) /* Timer Port Data Direction Register */ -+#define MCF_GPIO_PDDR_PCI MCF_REG08(0xFC0A4024) /* PCI Port Data Direction Register */ -+#define MCF_GPIO_PDDR_USB MCF_REG08(0xFC0A4025) /* USB Port Data Direction Register */ -+#define MCF_GPIO_PDDR_ATAH MCF_REG08(0xFC0A4026) /* ATA High Port Data Direction Register */ -+#define MCF_GPIO_PDDR_ATAL MCF_REG08(0xFC0A4027) /* ATA Low Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FEC1H MCF_REG08(0xFC0A4028) /* FEC1 High Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FEC1L MCF_REG08(0xFC0A4029) /* FEC1 Low Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FBADH MCF_REG08(0xFC0A402C) /* Flexbus AD High Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FBADMH MCF_REG08(0xFC0A402D) /* Flexbus AD Med-High Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FBADML MCF_REG08(0xFC0A402E) /* Flexbus AD Med-Low Port Data Direction Register */ -+#define MCF_GPIO_PDDR_FBADL MCF_REG08(0xFC0A402F) /* Flexbus AD Low Port Data Direction Register */ -+#define MCF_GPIO_PPDSDR_FEC0H MCF_REG08(0xFC0A4030) /* FEC0 High Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FEC0L MCF_REG08(0xFC0A4031) /* FEC0 Low Port Clear Output Data Register */ -+#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A4032) /* SSI Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FBCTL MCF_REG08(0xFC0A4033) /* Flexbus Control Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A4034) /* Flexbus Byte Enable Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A4035) /* Flexbus Chip-Select Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_DMA MCF_REG08(0xFC0A4036) /* DMA Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A4037) /* FEC1 / I2C Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4039) /* UART Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_DSPI MCF_REG08(0xFC0A403A) /* DSPI Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A403B) /* FTimer Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_PCI MCF_REG08(0xFC0A403C) /* PCI Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_USB MCF_REG08(0xFC0A403D) /* USB Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_ATAH MCF_REG08(0xFC0A403E) /* ATA High Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_ATAL MCF_REG08(0xFC0A403F) /* ATA Low Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FEC1H MCF_REG08(0xFC0A4040) /* FEC1 High Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FEC1L MCF_REG08(0xFC0A4041) /* FEC1 Low Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FBADH MCF_REG08(0xFC0A4044) /* Flexbus AD High Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FBADMH MCF_REG08(0xFC0A4045) /* Flexbus AD Med-High Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FBADML MCF_REG08(0xFC0A4046) /* Flexbus AD Med-Low Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PPDSDR_FBADL MCF_REG08(0xFC0A4047) /* Flexbus AD Low Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PCLRR_FEC0H MCF_REG08(0xFC0A4048) /* FEC0 High Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FEC0L MCF_REG08(0xFC0A4049) /* FEC0 Low Port Pin Data/Set Data Register */ -+#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A404A) /* SSI Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FBCTL MCF_REG08(0xFC0A404B) /* Flexbus Control Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A404C) /* Flexbus Byte Enable Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A404D) /* Flexbus Chip-Select Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_DMA MCF_REG08(0xFC0A404E) /* DMA Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A404F) /* FEC1 / I2C Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4051) /* UART Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_DSPI MCF_REG08(0xFC0A4052) /* DSPI Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4053) /* Timer Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_PCI MCF_REG08(0xFC0A4054) /* PCI Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_USB MCF_REG08(0xFC0A4055) /* USB Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_ATAH MCF_REG08(0xFC0A4056) /* ATA High Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_ATAL MCF_REG08(0xFC0A4057) /* ATA Low Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FEC1H MCF_REG08(0xFC0A4058) /* FEC1 High Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FEC1L MCF_REG08(0xFC0A4059) /* FEC1 Low Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FBADH MCF_REG08(0xFC0A405C) /* Flexbus AD High Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FBADMH MCF_REG08(0xFC0A405D) /* Flexbus AD Med-High Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FBADML MCF_REG08(0xFC0A405E) /* Flexbus AD Med-Low Port Clear Output Data Register */ -+#define MCF_GPIO_PCLRR_FBADL MCF_REG08(0xFC0A405F) /* Flexbus AD Low Port Clear Output Data Register */ -+#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4060) /* FEC Pin Assignment Register */ -+#define MCF_GPIO_PAR_DMA MCF_REG08(0xFC0A4061) /* DMA Pin Assignment Register */ -+#define MCF_GPIO_PAR_FBCTL MCF_REG08(0xFC0A4062) /* Flexbus Control Pin Assignment Register */ -+#define MCF_GPIO_PAR_DSPI MCF_REG08(0xFC0A4063) /* DSPI Pin Assignment Register */ -+#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4064) /* Flexbus Byte-Enable Pin Assignment Register */ -+#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4065) /* Flexbus Chip-Select Pin Assignment Register */ -+#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A4066) /* Time Pin Assignment Register */ -+#define MCF_GPIO_PAR_USB MCF_REG08(0xFC0A4067) /* USB Pin Assignment Register */ -+#define MCF_GPIO_PAR_UART MCF_REG08(0xFC0A4069) /* UART Pin Assignment Register */ -+#define MCF_GPIO_PAR_FECI2C MCF_REG16(0xFC0A406A) /* FEC / I2C Pin Assignment Register */ -+#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A406C) /* SSI Pin Assignment Register */ -+#define MCF_GPIO_PAR_ATA MCF_REG16(0xFC0A406E) /* ATA Pin Assignment Register */ -+#define MCF_GPIO_PAR_IRQ MCF_REG08(0xFC0A4070) /* IRQ Pin Assignment Register */ -+#define MCF_GPIO_PAR_PCI MCF_REG16(0xFC0A4072) /* PCI Pin Assignment Register */ -+#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4074) /* SDRAM Mode Select Control Register */ -+#define MCF_GPIO_MSCR_PCI MCF_REG08(0xFC0A4075) /* PCI Mode Select Control Register */ -+#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4078) /* I2C Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_FLEXBUS MCF_REG08(0xFC0A4079) /* FLEXBUS Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A407A) /* FEC Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A407B) /* UART Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_DSPI MCF_REG08(0xFC0A407C) /* DSPI Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A407D) /* TIMER Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A407E) /* SSI Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_DMA MCF_REG08(0xFC0A407F) /* DMA Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4080) /* DEBUG Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_RESET MCF_REG08(0xFC0A4081) /* RESET Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4082) /* IRQ Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_USB MCF_REG08(0xFC0A4083) /* USB Drive Strength Control Register */ -+#define MCF_GPIO_DSCR_ATA MCF_REG08(0xFC0A4084) /* ATA Drive Strength Control Register */ -+ -+/* Bit definitions and macros for PODR_FEC0H */ -+#define MCF_GPIO_PODR_FEC0H_PODR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */ -+#define MCF_GPIO_PODR_FEC0H_PODR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */ -+#define MCF_GPIO_PODR_FEC0H_PODR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */ -+#define MCF_GPIO_PODR_FEC0H_PODR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */ -+#define MCF_GPIO_PODR_FEC0H_PODR4 (0x10) /* FEC0_COL / ULPI_DATA7 */ -+#define MCF_GPIO_PODR_FEC0H_PODR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */ -+#define MCF_GPIO_PODR_FEC0H_PODR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */ -+#define MCF_GPIO_PODR_FEC0H_PODR7 (0x80) /* FEC0_TXCLK / FEC0_RMII_REF_CLK */ -+ -+/* Bit definitions and macros for PODR_FEC0L */ -+#define MCF_GPIO_PODR_FEC0L_PODR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */ -+#define MCF_GPIO_PODR_FEC0L_PODR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */ -+#define MCF_GPIO_PODR_FEC0L_PODR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */ -+#define MCF_GPIO_PODR_FEC0L_PODR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */ -+#define MCF_GPIO_PODR_FEC0L_PODR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */ -+#define MCF_GPIO_PODR_FEC0L_PODR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */ -+#define MCF_GPIO_PODR_FEC0L_PODR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */ -+#define MCF_GPIO_PODR_FEC0L_PODR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */ -+ -+/* Bit definitions and macros for PODR_SSI */ -+#define MCF_GPIO_PODR_SSI_PODR0 (0x01) /* SSI_TXD / U1TXD */ -+#define MCF_GPIO_PODR_SSI_PODR1 (0x02) /* SSI_RXD / U1RXD */ -+#define MCF_GPIO_PODR_SSI_PODR2 (0x04) /* SSI_FS / U1RTS */ -+#define MCF_GPIO_PODR_SSI_PODR3 (0x08) /* SSI_BCLK / U1CTS */ -+#define MCF_GPIO_PODR_SSI_PODR4 (0x10) /* SSI_MCLK */ -+ -+/* Bit definitions and macros for PODR_FBCTL */ -+#define MCF_GPIO_PODR_FBCTL_PODR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */ -+#define MCF_GPIO_PODR_FBCTL_PODR1 (0x02) /* FB_RW */ -+#define MCF_GPIO_PODR_FBCTL_PODR2 (0x04) /* FB_TA */ -+#define MCF_GPIO_PODR_FBCTL_PODR3 (0x08) /* FB_OE */ -+ -+/* Bit definitions and macros for PODR_BE */ -+#define MCF_GPIO_PODR_BE_PODR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */ -+#define MCF_GPIO_PODR_BE_PODR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */ -+#define MCF_GPIO_PODR_BE_PODR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */ -+#define MCF_GPIO_PODR_BE_PODR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */ -+ -+/* Bit definitions and macros for PODR_CS */ -+#define MCF_GPIO_PODR_CS_PODR1 (0x02) /* FB_CS1 */ -+#define MCF_GPIO_PODR_CS_PODR2 (0x04) /* FB_CS2 */ -+#define MCF_GPIO_PODR_CS_PODR3 (0x08) /* FB_CS3 */ -+ -+/* Bit definitions and macros for PODR_DMA */ -+#define MCF_GPIO_PODR_DMA_PODR0 (0x01) /* DREQ0 */ -+#define MCF_GPIO_PODR_DMA_PODR1 (0x02) /* DACK0 / DSPI_PCS3 */ -+#define MCF_GPIO_PODR_DMA_PODR2 (0x04) /* DREQ1 / USB_CLKIN */ -+#define MCF_GPIO_PODR_DMA_PODR3 (0x08) /* DACK1 / ULPI_DIR */ -+ -+/* Bit definitions and macros for PODR_FECI2C */ -+#define MCF_GPIO_PODR_FECI2C_PODR0 (0x01) /* I2C_SDA / U2RXD */ -+#define MCF_GPIO_PODR_FECI2C_PODR1 (0x02) /* I2C_SCL / U2TXD */ -+#define MCF_GPIO_PODR_FECI2C_PODR2 (0x04) /* FEC0_MDIO */ -+#define MCF_GPIO_PODR_FECI2C_PODR3 (0x08) /* FEC0_MDC */ -+#define MCF_GPIO_PODR_FECI2C_PODR4 (0x10) /* FEC1_MDIO / ATA_DIOW */ -+#define MCF_GPIO_PODR_FECI2C_PODR5 (0x20) /* FEC1_MDC / ATA_DIOR */ -+ -+/* Bit definitions and macros for PODR_UART */ -+#define MCF_GPIO_PODR_UART_PODR0 (0x01) /* U1TXD */ -+#define MCF_GPIO_PODR_UART_PODR1 (0x02) /* U1RXD */ -+#define MCF_GPIO_PODR_UART_PODR2 (0x04) /* U1RTS */ -+#define MCF_GPIO_PODR_UART_PODR3 (0x08) /* U0CTS */ -+#define MCF_GPIO_PODR_UART_PODR4 (0x10) /* U1TXD */ -+#define MCF_GPIO_PODR_UART_PODR5 (0x20) /* U1RXD */ -+#define MCF_GPIO_PODR_UART_PODR6 (0x40) /* U1RTS */ -+#define MCF_GPIO_PODR_UART_PODR7 (0x80) /* U1CTS */ -+ -+/* Bit definitions and macros for PODR_DSPI */ -+#define MCF_GPIO_PODR_DSPI_PODR0 (0x01) /* DSPI_SOUT / SBF_DO */ -+#define MCF_GPIO_PODR_DSPI_PODR1 (0x02) /* DSPI_SIN / SBF_DI */ -+#define MCF_GPIO_PODR_DSPI_PODR2 (0x04) /* DSPI_SCK / SBF_CK */ -+#define MCF_GPIO_PODR_DSPI_PODR3 (0x08) /* DSPI_PCS0/SS */ -+#define MCF_GPIO_PODR_DSPI_PODR4 (0x10) /* DSPI_PCS1 / SBF_CS */ -+#define MCF_GPIO_PODR_DSPI_PODR5 (0x20) /* DSPI_PCS2 */ -+#define MCF_GPIO_PODR_DSPI_PODR6 (0x40) /* DSPI_PCS5/SS */ -+ -+/* Bit definitions and macros for PODR_TIMER */ -+#define MCF_GPIO_PODR_TIMER_PODR0 (0x01) /* T0IN / T0OUT / U2RTS */ -+#define MCF_GPIO_PODR_TIMER_PODR1 (0x02) /* T1IN / T1OUT / U2CTS */ -+#define MCF_GPIO_PODR_TIMER_PODR2 (0x04) /* T2IN / T2OUT / U2TXD */ -+#define MCF_GPIO_PODR_TIMER_PODR3 (0x08) /* T3IN / T3OUT / U2RXD */ -+ -+/* Bit definitions and macros for PODR_PCI */ -+#define MCF_GPIO_PODR_PCI_PODR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */ -+#define MCF_GPIO_PODR_PCI_PODR1 (0x02) /* PCI_REQ1 */ -+#define MCF_GPIO_PODR_PCI_PODR2 (0x04) /* PCI_REQ2 */ -+#define MCF_GPIO_PODR_PCI_PODR3 (0x08) /* PCI_REQ3 / ATA_INTR */ -+#define MCF_GPIO_PODR_PCI_PODR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */ -+#define MCF_GPIO_PODR_PCI_PODR5 (0x20) /* PCI_GNT1 / */ -+#define MCF_GPIO_PODR_PCI_PODR6 (0x40) /* PCI_GNT2 / */ -+#define MCF_GPIO_PODR_PCI_PODR7 (0x80) /* PCI_GNT3 / ATA_DMACK */ -+ -+/* Bit definitions and macros for PODR_USB */ -+#define MCF_GPIO_PODR_USB_PODR0 (0x01) /* USB_VBUS_OC / ULPI_STP */ -+#define MCF_GPIO_PODR_USB_PODR1 (0x02) /* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */ -+ -+/* Bit definitions and macros for PODR_ATAH */ -+#define MCF_GPIO_PODR_ATAH_PODR0 (0x01) /* ATA_DA0 */ -+#define MCF_GPIO_PODR_ATAH_PODR1 (0x02) /* ATA_DA1 */ -+#define MCF_GPIO_PODR_ATAH_PODR2 (0x04) /* ATA_DA2 */ -+#define MCF_GPIO_PODR_ATAH_PODR3 (0x08) /* ATA_CS0 */ -+#define MCF_GPIO_PODR_ATAH_PODR4 (0x10) /* ATA_CS1 */ -+#define MCF_GPIO_PODR_ATAH_PODR5 (0x20) /* ATA_BUFFER_EN */ -+ -+/* Bit definitions and macros for PODR_ATAL */ -+#define MCF_GPIO_PODR_ATAL_PODR0 (0x01) /* ATA_IORDY */ -+#define MCF_GPIO_PODR_ATAL_PODR1 (0x02) /* ATA_DMARQ */ -+#define MCF_GPIO_PODR_ATAL_PODR2 (0x04) /* ATA_RESET */ -+ -+/* Bit definitions and macros for PODR_FEC1H */ -+#define MCF_GPIO_PODR_FEC1H_PODR0 (0x01) /* FEC1_CRS / ATA_DATA6 */ -+#define MCF_GPIO_PODR_FEC1H_PODR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */ -+#define MCF_GPIO_PODR_FEC1H_PODR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */ -+#define MCF_GPIO_PODR_FEC1H_PODR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */ -+#define MCF_GPIO_PODR_FEC1H_PODR4 (0x10) /* FEC1_COL / ATA_DATA7 */ -+#define MCF_GPIO_PODR_FEC1H_PODR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */ -+#define MCF_GPIO_PODR_FEC1H_PODR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */ -+#define MCF_GPIO_PODR_FEC1H_PODR7 (0x80) /* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */ -+ -+/* Bit definitions and macros for PODR_FEC1L */ -+#define MCF_GPIO_PODR_FEC1L_PODR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */ -+#define MCF_GPIO_PODR_FEC1L_PODR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */ -+#define MCF_GPIO_PODR_FEC1L_PODR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */ -+#define MCF_GPIO_PODR_FEC1L_PODR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */ -+#define MCF_GPIO_PODR_FEC1L_PODR4 (0x10) /* FEC1_TXER / ATA_DATA0 */ -+#define MCF_GPIO_PODR_FEC1L_PODR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */ -+#define MCF_GPIO_PODR_FEC1L_PODR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */ -+#define MCF_GPIO_PODR_FEC1L_PODR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */ -+ -+/* Bit definitions and macros for PODR_FBADH */ -+#define MCF_GPIO_PODR_FBADH_PODR0 (0x01) /* FB_AD24 */ -+#define MCF_GPIO_PODR_FBADH_PODR1 (0x02) /* FB_AD25 */ -+#define MCF_GPIO_PODR_FBADH_PODR2 (0x04) /* FB_AD26 */ -+#define MCF_GPIO_PODR_FBADH_PODR3 (0x08) /* FB_AD27 */ -+#define MCF_GPIO_PODR_FBADH_PODR4 (0x10) /* FB_AD28 */ -+#define MCF_GPIO_PODR_FBADH_PODR5 (0x20) /* FB_AD29 */ -+#define MCF_GPIO_PODR_FBADH_PODR6 (0x40) /* FB_AD30 */ -+#define MCF_GPIO_PODR_FBADH_PODR7 (0x80) /* FB_AD31 */ -+ -+/* Bit definitions and macros for PODR_FBADMH */ -+#define MCF_GPIO_PODR_FBADMH_PODR0 (0x01) /* FB_AD16 */ -+#define MCF_GPIO_PODR_FBADMH_PODR1 (0x02) /* FB_AD17 */ -+#define MCF_GPIO_PODR_FBADMH_PODR2 (0x04) /* FB_AD18 */ -+#define MCF_GPIO_PODR_FBADMH_PODR3 (0x08) /* FB_AD19 */ -+#define MCF_GPIO_PODR_FBADMH_PODR4 (0x10) /* FB_AD20 */ -+#define MCF_GPIO_PODR_FBADMH_PODR5 (0x20) /* FB_AD21 */ -+#define MCF_GPIO_PODR_FBADMH_PODR6 (0x40) /* FB_AD22 */ -+#define MCF_GPIO_PODR_FBADMH_PODR7 (0x80) /* FB_AD23 */ -+ -+/* Bit definitions and macros for PODR_FBADML */ -+#define MCF_GPIO_PODR_FBADML_PODR0 (0x01) /* FB_AD8 */ -+#define MCF_GPIO_PODR_FBADML_PODR1 (0x02) /* FB_AD9 */ -+#define MCF_GPIO_PODR_FBADML_PODR2 (0x04) /* FB_AD10 */ -+#define MCF_GPIO_PODR_FBADML_PODR3 (0x08) /* FB_AD11 */ -+#define MCF_GPIO_PODR_FBADML_PODR4 (0x10) /* FB_AD12 */ -+#define MCF_GPIO_PODR_FBADML_PODR5 (0x20) /* FB_AD13 */ -+#define MCF_GPIO_PODR_FBADML_PODR6 (0x40) /* FB_AD14 */ -+#define MCF_GPIO_PODR_FBADML_PODR7 (0x80) /* FB_AD15 */ -+ -+/* Bit definitions and macros for PODR_FBADL */ -+#define MCF_GPIO_PODR_FBADL_PODR0 (0x01) /* FB_AD0 */ -+#define MCF_GPIO_PODR_FBADL_PODR1 (0x02) /* FB_AD1 */ -+#define MCF_GPIO_PODR_FBADL_PODR2 (0x04) /* FB_AD2 */ -+#define MCF_GPIO_PODR_FBADL_PODR3 (0x08) /* FB_AD3 */ -+#define MCF_GPIO_PODR_FBADL_PODR4 (0x10) /* FB_AD4 */ -+#define MCF_GPIO_PODR_FBADL_PODR5 (0x20) /* FB_AD5 */ -+#define MCF_GPIO_PODR_FBADL_PODR6 (0x40) /* FB_AD6 */ -+#define MCF_GPIO_PODR_FBADL_PODR7 (0x80) /* FB_AD7 */ -+ -+/* Bit definitions and macros for PDDR_FEC0H */ -+#define MCF_GPIO_PDDR_FEC0H_PDDR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */ -+#define MCF_GPIO_PDDR_FEC0H_PDDR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */ -+#define MCF_GPIO_PDDR_FEC0H_PDDR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */ -+#define MCF_GPIO_PDDR_FEC0H_PDDR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */ -+#define MCF_GPIO_PDDR_FEC0H_PDDR4 (0x10) /* FEC0_COL / ULPI_DATA7 */ -+#define MCF_GPIO_PDDR_FEC0H_PDDR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */ -+#define MCF_GPIO_PDDR_FEC0H_PDDR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */ -+#define MCF_GPIO_PDDR_FEC0H_PDDR7 (0x80) /* FEC0_TXCLK / FEC0_RMII_REF_CLK */ -+ -+/* Bit definitions and macros for PDDR_FEC0L */ -+#define MCF_GPIO_PDDR_FEC0L_PDDR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */ -+#define MCF_GPIO_PDDR_FEC0L_PDDR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */ -+#define MCF_GPIO_PDDR_FEC0L_PDDR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */ -+#define MCF_GPIO_PDDR_FEC0L_PDDR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */ -+#define MCF_GPIO_PDDR_FEC0L_PDDR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */ -+#define MCF_GPIO_PDDR_FEC0L_PDDR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */ -+#define MCF_GPIO_PDDR_FEC0L_PDDR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */ -+#define MCF_GPIO_PDDR_FEC0L_PDDR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */ -+ -+/* Bit definitions and macros for PDDR_SSI */ -+#define MCF_GPIO_PDDR_SSI_PDDR0 (0x01) /* SSI_TXD / U1TXD */ -+#define MCF_GPIO_PDDR_SSI_PDDR1 (0x02) /* SSI_RXD / U1RXD */ -+#define MCF_GPIO_PDDR_SSI_PDDR2 (0x04) /* SSI_FS / U1RTS */ -+#define MCF_GPIO_PDDR_SSI_PDDR3 (0x08) /* SSI_BCLK / U1CTS */ -+#define MCF_GPIO_PDDR_SSI_PDDR4 (0x10) /* SSI_MCLK */ -+ -+/* Bit definitions and macros for PDDR_FBCTL */ -+#define MCF_GPIO_PDDR_FBCTL_PDDR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */ -+#define MCF_GPIO_PDDR_FBCTL_PDDR1 (0x02) /* FB_RW */ -+#define MCF_GPIO_PDDR_FBCTL_PDDR2 (0x04) /* FB_TA */ -+#define MCF_GPIO_PDDR_FBCTL_PDDR3 (0x08) /* FB_OE */ -+ -+/* Bit definitions and macros for PDDR_BE */ -+#define MCF_GPIO_PDDR_BE_PDDR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */ -+#define MCF_GPIO_PDDR_BE_PDDR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */ -+#define MCF_GPIO_PDDR_BE_PDDR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */ -+#define MCF_GPIO_PDDR_BE_PDDR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */ -+ -+/* Bit definitions and macros for PDDR_CS */ -+#define MCF_GPIO_PDDR_CS_PDDR1 (0x02) /* FB_CS1 */ -+#define MCF_GPIO_PDDR_CS_PDDR2 (0x04) /* FB_CS2 */ -+#define MCF_GPIO_PDDR_CS_PDDR3 (0x08) /* FB_CS3 */ -+ -+/* Bit definitions and macros for PDDR_DMA */ -+#define MCF_GPIO_PDDR_DMA_PDDR0 (0x01) /* DREQ0 */ -+#define MCF_GPIO_PDDR_DMA_PDDR1 (0x02) /* DACK0 / DSPI_PCS3 */ -+#define MCF_GPIO_PDDR_DMA_PDDR2 (0x04) /* DREQ1 / USB_CLKIN */ -+#define MCF_GPIO_PDDR_DMA_PDDR3 (0x08) /* DACK1 / ULPI_DIR */ -+ -+/* Bit definitions and macros for PDDR_FECI2C */ -+#define MCF_GPIO_PDDR_FECI2C_PDDR0 (0x01) /* I2C_SDA / U2RXD */ -+#define MCF_GPIO_PDDR_FECI2C_PDDR1 (0x02) /* I2C_SCL / U2TXD */ -+#define MCF_GPIO_PDDR_FECI2C_PDDR2 (0x04) /* FEC0_MDIO */ -+#define MCF_GPIO_PDDR_FECI2C_PDDR3 (0x08) /* FEC0_MDC */ -+#define MCF_GPIO_PDDR_FECI2C_PDDR4 (0x10) /* FEC1_MDIO / ATA_DIOW */ -+#define MCF_GPIO_PDDR_FECI2C_PDDR5 (0x20) /* FEC1_MDC / ATA_DIOR */ -+ -+/* Bit definitions and macros for PDDR_UART */ -+#define MCF_GPIO_PDDR_UART_PDDR0 (0x01) /* U1TXD */ -+#define MCF_GPIO_PDDR_UART_PDDR1 (0x02) /* U1RXD */ -+#define MCF_GPIO_PDDR_UART_PDDR2 (0x04) /* U1RTS */ -+#define MCF_GPIO_PDDR_UART_PDDR3 (0x08) /* U0CTS */ -+#define MCF_GPIO_PDDR_UART_PDDR4 (0x10) /* U1TXD */ -+#define MCF_GPIO_PDDR_UART_PDDR5 (0x20) /* U1RXD */ -+#define MCF_GPIO_PDDR_UART_PDDR6 (0x40) /* U1RTS */ -+#define MCF_GPIO_PDDR_UART_PDDR7 (0x80) /* U1CTS */ -+ -+/* Bit definitions and macros for PDDR_DSPI */ -+#define MCF_GPIO_PDDR_DSPI_PDDR0 (0x01) /* DSPI_SOUT / SBF_DO */ -+#define MCF_GPIO_PDDR_DSPI_PDDR1 (0x02) /* DSPI_SIN / SBF_DI */ -+#define MCF_GPIO_PDDR_DSPI_PDDR2 (0x04) /* DSPI_SCK / SBF_CK */ -+#define MCF_GPIO_PDDR_DSPI_PDDR3 (0x08) /* DSPI_PCS0/SS */ -+#define MCF_GPIO_PDDR_DSPI_PDDR4 (0x10) /* DSPI_PCS1 / SBF_CS */ -+#define MCF_GPIO_PDDR_DSPI_PDDR5 (0x20) /* DSPI_PCS2 */ -+#define MCF_GPIO_PDDR_DSPI_PDDR6 (0x40) /* DSPI_PCS5/SS */ -+ -+/* Bit definitions and macros for PDDR_TIMER */ -+#define MCF_GPIO_PDDR_TIMER_PDDR0 (0x01) /* T0IN / T0OUT / U2RTS */ -+#define MCF_GPIO_PDDR_TIMER_PDDR1 (0x02) /* T1IN / T1OUT / U2CTS */ -+#define MCF_GPIO_PDDR_TIMER_PDDR2 (0x04) /* T2IN / T2OUT / U2TXD */ -+#define MCF_GPIO_PDDR_TIMER_PDDR3 (0x08) /* T3IN / T3OUT / U2RXD */ -+ -+/* Bit definitions and macros for PDDR_PCI */ -+#define MCF_GPIO_PDDR_PCI_PDDR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */ -+#define MCF_GPIO_PDDR_PCI_PDDR1 (0x02) /* PCI_REQ1 */ -+#define MCF_GPIO_PDDR_PCI_PDDR2 (0x04) /* PCI_REQ2 */ -+#define MCF_GPIO_PDDR_PCI_PDDR3 (0x08) /* PCI_REQ3 / ATA_INTR */ -+#define MCF_GPIO_PDDR_PCI_PDDR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */ -+#define MCF_GPIO_PDDR_PCI_PDDR5 (0x20) /* PCI_GNT1 / */ -+#define MCF_GPIO_PDDR_PCI_PDDR6 (0x40) /* PCI_GNT2 / */ -+#define MCF_GPIO_PDDR_PCI_PDDR7 (0x80) /* PCI_GNT3 / ATA_DMACK */ -+ -+/* Bit definitions and macros for PDDR_USB */ -+#define MCF_GPIO_PDDR_USB_PDDR0 (0x01) /* USB_VBUS_OC / ULPI_STP */ -+#define MCF_GPIO_PDDR_USB_PDDR1 (0x02) /* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */ -+ -+/* Bit definitions and macros for PDDR_ATAH */ -+#define MCF_GPIO_PDDR_ATAH_PDDR0 (0x01) /* ATA_DA0 */ -+#define MCF_GPIO_PDDR_ATAH_PDDR1 (0x02) /* ATA_DA1 */ -+#define MCF_GPIO_PDDR_ATAH_PDDR2 (0x04) /* ATA_DA2 */ -+#define MCF_GPIO_PDDR_ATAH_PDDR3 (0x08) /* ATA_CS0 */ -+#define MCF_GPIO_PDDR_ATAH_PDDR4 (0x10) /* ATA_CS1 */ -+#define MCF_GPIO_PDDR_ATAH_PDDR5 (0x20) /* ATA_BUFFER_EN */ -+ -+/* Bit definitions and macros for PDDR_ATAL */ -+#define MCF_GPIO_PDDR_ATAL_PDDR0 (0x01) /* ATA_IORDY */ -+#define MCF_GPIO_PDDR_ATAL_PDDR1 (0x02) /* ATA_DMARQ */ -+#define MCF_GPIO_PDDR_ATAL_PDDR2 (0x04) /* ATA_RESET */ -+ -+/* Bit definitions and macros for PDDR_FEC1H */ -+#define MCF_GPIO_PDDR_FEC1H_PDDR0 (0x01) /* FEC1_CRS / ATA_DATA6 */ -+#define MCF_GPIO_PDDR_FEC1H_PDDR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */ -+#define MCF_GPIO_PDDR_FEC1H_PDDR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */ -+#define MCF_GPIO_PDDR_FEC1H_PDDR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */ -+#define MCF_GPIO_PDDR_FEC1H_PDDR4 (0x10) /* FEC1_COL / ATA_DATA7 */ -+#define MCF_GPIO_PDDR_FEC1H_PDDR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */ -+#define MCF_GPIO_PDDR_FEC1H_PDDR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */ -+#define MCF_GPIO_PDDR_FEC1H_PDDR7 (0x80) /* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */ -+ -+/* Bit definitions and macros for PDDR_FEC1L */ -+#define MCF_GPIO_PDDR_FEC1L_PDDR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */ -+#define MCF_GPIO_PDDR_FEC1L_PDDR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */ -+#define MCF_GPIO_PDDR_FEC1L_PDDR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */ -+#define MCF_GPIO_PDDR_FEC1L_PDDR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */ -+#define MCF_GPIO_PDDR_FEC1L_PDDR4 (0x10) /* FEC1_TXER / ATA_DATA0 */ -+#define MCF_GPIO_PDDR_FEC1L_PDDR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */ -+#define MCF_GPIO_PDDR_FEC1L_PDDR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */ -+#define MCF_GPIO_PDDR_FEC1L_PDDR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */ -+ -+/* Bit definitions and macros for PDDR_FBADH */ -+#define MCF_GPIO_PDDR_FBADH_PDDR0 (0x01) /* FB_AD24 */ -+#define MCF_GPIO_PDDR_FBADH_PDDR1 (0x02) /* FB_AD25 */ -+#define MCF_GPIO_PDDR_FBADH_PDDR2 (0x04) /* FB_AD26 */ -+#define MCF_GPIO_PDDR_FBADH_PDDR3 (0x08) /* FB_AD27 */ -+#define MCF_GPIO_PDDR_FBADH_PDDR4 (0x10) /* FB_AD28 */ -+#define MCF_GPIO_PDDR_FBADH_PDDR5 (0x20) /* FB_AD29 */ -+#define MCF_GPIO_PDDR_FBADH_PDDR6 (0x40) /* FB_AD30 */ -+#define MCF_GPIO_PDDR_FBADH_PDDR7 (0x80) /* FB_AD31 */ -+ -+/* Bit definitions and macros for PDDR_FBADMH */ -+#define MCF_GPIO_PDDR_FBADMH_PDDR0 (0x01) /* FB_AD16 */ -+#define MCF_GPIO_PDDR_FBADMH_PDDR1 (0x02) /* FB_AD17 */ -+#define MCF_GPIO_PDDR_FBADMH_PDDR2 (0x04) /* FB_AD18 */ -+#define MCF_GPIO_PDDR_FBADMH_PDDR3 (0x08) /* FB_AD19 */ -+#define MCF_GPIO_PDDR_FBADMH_PDDR4 (0x10) /* FB_AD20 */ -+#define MCF_GPIO_PDDR_FBADMH_PDDR5 (0x20) /* FB_AD21 */ -+#define MCF_GPIO_PDDR_FBADMH_PDDR6 (0x40) /* FB_AD22 */ -+#define MCF_GPIO_PDDR_FBADMH_PDDR7 (0x80) /* FB_AD23 */ -+ -+/* Bit definitions and macros for PDDR_FBADML */ -+#define MCF_GPIO_PDDR_FBADML_PDDR0 (0x01) /* FB_AD8 */ -+#define MCF_GPIO_PDDR_FBADML_PDDR1 (0x02) /* FB_AD9 */ -+#define MCF_GPIO_PDDR_FBADML_PDDR2 (0x04) /* FB_AD10 */ -+#define MCF_GPIO_PDDR_FBADML_PDDR3 (0x08) /* FB_AD11 */ -+#define MCF_GPIO_PDDR_FBADML_PDDR4 (0x10) /* FB_AD12 */ -+#define MCF_GPIO_PDDR_FBADML_PDDR5 (0x20) /* FB_AD13 */ -+#define MCF_GPIO_PDDR_FBADML_PDDR6 (0x40) /* FB_AD14 */ -+#define MCF_GPIO_PDDR_FBADML_PDDR7 (0x80) /* FB_AD15 */ -+ -+/* Bit definitions and macros for PDDR_FBADL */ -+#define MCF_GPIO_PDDR_FBADL_PDDR0 (0x01) /* FB_AD0 */ -+#define MCF_GPIO_PDDR_FBADL_PDDR1 (0x02) /* FB_AD1 */ -+#define MCF_GPIO_PDDR_FBADL_PDDR2 (0x04) /* FB_AD2 */ -+#define MCF_GPIO_PDDR_FBADL_PDDR3 (0x08) /* FB_AD3 */ -+#define MCF_GPIO_PDDR_FBADL_PDDR4 (0x10) /* FB_AD4 */ -+#define MCF_GPIO_PDDR_FBADL_PDDR5 (0x20) /* FB_AD5 */ -+#define MCF_GPIO_PDDR_FBADL_PDDR6 (0x40) /* FB_AD6 */ -+#define MCF_GPIO_PDDR_FBADL_PDDR7 (0x80) /* FB_AD7 */ -+ -+/* Bit definitions and macros for PPDSDR_FEC0H */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDR2 (0x04) /* FEC0_RXDV / FEC0_RMII_CRS_DV */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDR4 (0x10) /* FEC0_COL / ULPI_DATA7 */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */ -+#define MCF_GPIO_PPDSDR_FEC0H_PPDR7 (0x80) /* FEC0_TXCLK / FEC0_RMII_REF_CLK */ -+ -+/* Bit definitions and macros for PPDSDR_FEC0L */ -+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */ -+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */ -+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */ -+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */ -+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */ -+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */ -+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */ -+#define MCF_GPIO_PPDSDR_FEC0L_PCLRR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */ -+ -+/* Bit definitions and macros for PPDSDR_SSI */ -+#define MCF_GPIO_PPDSDR_SSI_PPDR0 (0x01) /* SSI_TXD / U1TXD */ -+#define MCF_GPIO_PPDSDR_SSI_PPDR1 (0x02) /* SSI_RXD / U1RXD */ -+#define MCF_GPIO_PPDSDR_SSI_PPDR2 (0x04) /* SSI_FS / U1RTS */ -+#define MCF_GPIO_PPDSDR_SSI_PPDR3 (0x08) /* SSI_BCLK / U1CTS */ -+#define MCF_GPIO_PPDSDR_SSI_PPDR4 (0x10) /* SSI_MCLK */ -+ -+/* Bit definitions and macros for PPDSDR_FBCTL */ -+#define MCF_GPIO_PPDSDR_FBCTL_PPDR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */ -+#define MCF_GPIO_PPDSDR_FBCTL_PPDR1 (0x02) /* FB_RW */ -+#define MCF_GPIO_PPDSDR_FBCTL_PPDR2 (0x04) /* FB_TA */ -+#define MCF_GPIO_PPDSDR_FBCTL_PPDR3 (0x08) /* FB_OE */ -+ -+/* Bit definitions and macros for PPDSDR_BE */ -+#define MCF_GPIO_PPDSDR_BE_PPDR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */ -+#define MCF_GPIO_PPDSDR_BE_PPDR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */ -+#define MCF_GPIO_PPDSDR_BE_PPDR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */ -+#define MCF_GPIO_PPDSDR_BE_PPDR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */ -+ -+/* Bit definitions and macros for PPDSDR_CS */ -+#define MCF_GPIO_PPDSDR_CS_PPDR1 (0x02) /* FB_CS1 */ -+#define MCF_GPIO_PPDSDR_CS_PPDR2 (0x04) /* FB_CS2 */ -+#define MCF_GPIO_PPDSDR_CS_PPDR3 (0x08) /* FB_CS3 */ -+ -+/* Bit definitions and macros for PPDSDR_DMA */ -+#define MCF_GPIO_PPDSDR_DMA_PPDR0 (0x01) /* DREQ0 */ -+#define MCF_GPIO_PPDSDR_DMA_PPDR1 (0x02) /* DACK0 / DSPI_PCS3 */ -+#define MCF_GPIO_PPDSDR_DMA_PPDR2 (0x04) /* DREQ1 / USB_CLKIN */ -+#define MCF_GPIO_PPDSDR_DMA_PPDR3 (0x08) /* DACK1 / ULPI_DIR */ -+ -+/* Bit definitions and macros for PPDSDR_FECI2C */ -+#define MCF_GPIO_PPDSDR_FECI2C_PPDR0 (0x01) /* I2C_SDA / U2RXD */ -+#define MCF_GPIO_PPDSDR_FECI2C_PPDR1 (0x02) /* I2C_SCL / U2TXD */ -+#define MCF_GPIO_PPDSDR_FECI2C_PPDR2 (0x04) /* FEC0_MDIO */ -+#define MCF_GPIO_PPDSDR_FECI2C_PPDR3 (0x08) /* FEC0_MDC */ -+#define MCF_GPIO_PPDSDR_FECI2C_PPDR4 (0x10) /* FEC1_MDIO / ATA_DIOW */ -+#define MCF_GPIO_PPDSDR_FECI2C_PPDR5 (0x20) /* FEC1_MDC / ATA_DIOR */ -+ -+/* Bit definitions and macros for PPDSDR_UART */ -+#define MCF_GPIO_PPDSDR_UART_PPDR0 (0x01) /* U1TXD */ -+#define MCF_GPIO_PPDSDR_UART_PPDR1 (0x02) /* U1RXD */ -+#define MCF_GPIO_PPDSDR_UART_PPDR2 (0x04) /* U1RTS */ -+#define MCF_GPIO_PPDSDR_UART_PPDR3 (0x08) /* U0CTS */ -+#define MCF_GPIO_PPDSDR_UART_PPDR4 (0x10) /* U1TXD */ -+#define MCF_GPIO_PPDSDR_UART_PPDR5 (0x20) /* U1RXD */ -+#define MCF_GPIO_PPDSDR_UART_PPDR6 (0x40) /* U1RTS */ -+#define MCF_GPIO_PPDSDR_UART_PPDR7 (0x80) /* U1CTS */ -+ -+/* Bit definitions and macros for PPDSDR_DSPI */ -+#define MCF_GPIO_PPDSDR_DSPI_PPDR0 (0x01) /* DSPI_SOUT / SBF_DO */ -+#define MCF_GPIO_PPDSDR_DSPI_PPDR1 (0x02) /* DSPI_SIN / SBF_DI */ -+#define MCF_GPIO_PPDSDR_DSPI_PPDR2 (0x04) /* DSPI_SCK / SBF_CK */ -+#define MCF_GPIO_PPDSDR_DSPI_PPDR3 (0x08) /* DSPI_PCS0/SS */ -+#define MCF_GPIO_PPDSDR_DSPI_PPDR4 (0x10) /* DSPI_PCS1 / SBF_CS */ -+#define MCF_GPIO_PPDSDR_DSPI_PPDR5 (0x20) /* DSPI_PCS2 */ -+#define MCF_GPIO_PPDSDR_DSPI_PPDR6 (0x40) /* DSPI_PCS5/SS */ -+ -+/* Bit definitions and macros for PPDSDR_TIMER */ -+#define MCF_GPIO_PPDSDR_TIMER_PPDR0 (0x01) /* T0IN / T0OUT / U2RTS */ -+#define MCF_GPIO_PPDSDR_TIMER_PPDR1 (0x02) /* T1IN / T1OUT / U2CTS */ -+#define MCF_GPIO_PPDSDR_TIMER_PPDR2 (0x04) /* T2IN / T2OUT / U2TXD */ -+#define MCF_GPIO_PPDSDR_TIMER_PPDR3 (0x08) /* T3IN / T3OUT / U2RXD */ -+ -+/* Bit definitions and macros for PPDSDR_PCI */ -+#define MCF_GPIO_PPDSDR_PCI_PPDR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */ -+#define MCF_GPIO_PPDSDR_PCI_PPDR1 (0x02) /* PCI_REQ1 */ -+#define MCF_GPIO_PPDSDR_PCI_PPDR2 (0x04) /* PCI_REQ2 */ -+#define MCF_GPIO_PPDSDR_PCI_PPDR3 (0x08) /* PCI_REQ3 / ATA_INTR */ -+#define MCF_GPIO_PPDSDR_PCI_PPDR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */ -+#define MCF_GPIO_PPDSDR_PCI_PPDR5 (0x20) /* PCI_GNT1 / */ -+#define MCF_GPIO_PPDSDR_PCI_PPDR6 (0x40) /* PCI_GNT2 / */ -+#define MCF_GPIO_PPDSDR_PCI_PPDR7 (0x80) /* PCI_GNT3 / ATA_DMACK */ -+ -+/* Bit definitions and macros for PPDSDR_USB */ -+#define MCF_GPIO_PPDSDR_USB_PPDR0 (0x01) /* USB_VBUS_OC / ULPI_STP */ -+#define MCF_GPIO_PPDSDR_USB_PPDR1 (0x02) /* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */ -+ -+/* Bit definitions and macros for PPDSDR_ATAH */ -+#define MCF_GPIO_PPDSDR_ATAH_PPDR0 (0x01) /* ATA_DA0 */ -+#define MCF_GPIO_PPDSDR_ATAH_PPDR1 (0x02) /* ATA_DA1 */ -+#define MCF_GPIO_PPDSDR_ATAH_PPDR2 (0x04) /* ATA_DA2 */ -+#define MCF_GPIO_PPDSDR_ATAH_PPDR3 (0x08) /* ATA_CS0 */ -+#define MCF_GPIO_PPDSDR_ATAH_PPDR4 (0x10) /* ATA_CS1 */ -+#define MCF_GPIO_PPDSDR_ATAH_PPDR5 (0x20) /* ATA_BUFFER_EN */ -+ -+/* Bit definitions and macros for PPDSDR_ATAL */ -+#define MCF_GPIO_PPDSDR_ATAL_PPDR0 (0x01) /* ATA_IORDY */ -+#define MCF_GPIO_PPDSDR_ATAL_PPDR1 (0x02) /* ATA_DMARQ */ -+#define MCF_GPIO_PPDSDR_ATAL_PPDR2 (0x04) /* ATA_RESET */ -+ -+/* Bit definitions and macros for PPDSDR_FEC1H */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDR0 (0x01) /* FEC1_CRS / ATA_DATA6 */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDR4 (0x10) /* FEC1_COL / ATA_DATA7 */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */ -+#define MCF_GPIO_PPDSDR_FEC1H_PPDR7 (0x80) /* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */ -+ -+/* Bit definitions and macros for PPDSDR_FEC1L */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDR4 (0x10) /* FEC1_TXER / ATA_DATA0 */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */ -+#define MCF_GPIO_PPDSDR_FEC1L_PPDR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */ -+ -+/* Bit definitions and macros for PPDSDR_FBADH */ -+#define MCF_GPIO_PPDSDR_FBADH_PPDR0 (0x01) /* FB_AD24 */ -+#define MCF_GPIO_PPDSDR_FBADH_PPDR1 (0x02) /* FB_AD25 */ -+#define MCF_GPIO_PPDSDR_FBADH_PPDR2 (0x04) /* FB_AD26 */ -+#define MCF_GPIO_PPDSDR_FBADH_PPDR3 (0x08) /* FB_AD27 */ -+#define MCF_GPIO_PPDSDR_FBADH_PPDR4 (0x10) /* FB_AD28 */ -+#define MCF_GPIO_PPDSDR_FBADH_PPDR5 (0x20) /* FB_AD29 */ -+#define MCF_GPIO_PPDSDR_FBADH_PPDR6 (0x40) /* FB_AD30 */ -+#define MCF_GPIO_PPDSDR_FBADH_PPDR7 (0x80) /* FB_AD31 */ -+ -+/* Bit definitions and macros for PPDSDR_FBADMH */ -+#define MCF_GPIO_PPDSDR_FBADMH_PPDR0 (0x01) /* FB_AD16 */ -+#define MCF_GPIO_PPDSDR_FBADMH_PPDR1 (0x02) /* FB_AD17 */ -+#define MCF_GPIO_PPDSDR_FBADMH_PPDR2 (0x04) /* FB_AD18 */ -+#define MCF_GPIO_PPDSDR_FBADMH_PPDR3 (0x08) /* FB_AD19 */ -+#define MCF_GPIO_PPDSDR_FBADMH_PPDR4 (0x10) /* FB_AD20 */ -+#define MCF_GPIO_PPDSDR_FBADMH_PPDR5 (0x20) /* FB_AD21 */ -+#define MCF_GPIO_PPDSDR_FBADMH_PPDR6 (0x40) /* FB_AD22 */ -+#define MCF_GPIO_PPDSDR_FBADMH_PPDR7 (0x80) /* FB_AD23 */ -+ -+/* Bit definitions and macros for PPDSDR_FBADML */ -+#define MCF_GPIO_PPDSDR_FBADML_PPDR0 (0x01) /* FB_AD8 */ -+#define MCF_GPIO_PPDSDR_FBADML_PPDR1 (0x02) /* FB_AD9 */ -+#define MCF_GPIO_PPDSDR_FBADML_PPDR2 (0x04) /* FB_AD10 */ -+#define MCF_GPIO_PPDSDR_FBADML_PPDR3 (0x08) /* FB_AD11 */ -+#define MCF_GPIO_PPDSDR_FBADML_PPDR4 (0x10) /* FB_AD12 */ -+#define MCF_GPIO_PPDSDR_FBADML_PPDR5 (0x20) /* FB_AD13 */ -+#define MCF_GPIO_PPDSDR_FBADML_PPDR6 (0x40) /* FB_AD14 */ -+#define MCF_GPIO_PPDSDR_FBADML_PPDR7 (0x80) /* FB_AD15 */ -+ -+/* Bit definitions and macros for PPDSDR_FBADL */ -+#define MCF_GPIO_PPDSDR_FBADL_PPDR0 (0x01) /* FB_AD0 */ -+#define MCF_GPIO_PPDSDR_FBADL_PPDR1 (0x02) /* FB_AD1 */ -+#define MCF_GPIO_PPDSDR_FBADL_PPDR2 (0x04) /* FB_AD2 */ -+#define MCF_GPIO_PPDSDR_FBADL_PPDR3 (0x08) /* FB_AD3 */ -+#define MCF_GPIO_PPDSDR_FBADL_PPDR4 (0x10) /* FB_AD4 */ -+#define MCF_GPIO_PPDSDR_FBADL_PPDR5 (0x20) /* FB_AD5 */ -+#define MCF_GPIO_PPDSDR_FBADL_PPDR6 (0x40) /* FB_AD6 */ -+#define MCF_GPIO_PPDSDR_FBADL_PPDR7 (0x80) /* FB_AD7 */ -+ -+/* Bit definitions and macros for PCLRR_FEC0H */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRR0 (0x01) /* FEC0_CRS / ULPI_DATA6 */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRR1 (0x02) /* FEC0_RXD0 / FEC0_RMII_RXD0 */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRR2 (0x04) /* FEC0_RXDV/FEC0_RMII_CRS_DV */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRR3 (0x08) /* FEC0_RXCLK / ULPI_DATA1 */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRR4 (0x10) /* FEC0_COL / ULPI_DATA7 */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRR5 (0x20) /* FEC0_TXD0 / FEC0_RMII_TXD0 */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRR6 (0x40) /* FEC0_TXEN / FEC0_RMII_TXEN */ -+#define MCF_GPIO_PCLRR_FEC0H_PCLRR7 (0x80) /* FEC0_TXCLK / FEC0_RMII_REF_CLK */ -+ -+/* Bit definitions and macros for PCLRR_FEC0L */ -+#define MCF_GPIO_PCLRR_FEC0L_PPDR0 (0x01) /* FEC0_RXER / FEC0_RMII_RXER */ -+#define MCF_GPIO_PCLRR_FEC0L_PPDR1 (0x02) /* FEC0_RXD1 / FEC0_RMII_RXD1 */ -+#define MCF_GPIO_PCLRR_FEC0L_PPDR2 (0x04) /* FEC0_RXD2 / ULPI_DATA4 */ -+#define MCF_GPIO_PCLRR_FEC0L_PPDR3 (0x08) /* FEC0_RXD3 / ULPI_DATA5 */ -+#define MCF_GPIO_PCLRR_FEC0L_PPDR4 (0x10) /* FEC0_TXER / ULPI_DATA0 */ -+#define MCF_GPIO_PCLRR_FEC0L_PPDR5 (0x20) /* FEC0_TXD1 / FEC0_RMII_TXD1 */ -+#define MCF_GPIO_PCLRR_FEC0L_PPDR6 (0x40) /* FEC0_TXD2 / ULPI_DATA2 */ -+#define MCF_GPIO_PCLRR_FEC0L_PPDR7 (0x80) /* FEC0_TXD3 / ULPI_DATA3 */ -+ -+/* Bit definitions and macros for PCLRR_SSI */ -+#define MCF_GPIO_PCLRR_SSI_PCLRR0 (0x01) /* SSI_TXD / U1TXD */ -+#define MCF_GPIO_PCLRR_SSI_PCLRR1 (0x02) /* SSI_RXD / U1RXD */ -+#define MCF_GPIO_PCLRR_SSI_PCLRR2 (0x04) /* SSI_FS / U1RTS */ -+#define MCF_GPIO_PCLRR_SSI_PCLRR3 (0x08) /* SSI_BCLK / U1CTS */ -+#define MCF_GPIO_PCLRR_SSI_PCLRR4 (0x10) /* SSI_MCLK */ -+ -+/* Bit definitions and macros for PCLRR_FBCTL */ -+#define MCF_GPIO_PCLRR_FBCTL_PCLRR0 (0x01) /* FB_TS / FB_ALE / FB_TBST */ -+#define MCF_GPIO_PCLRR_FBCTL_PCLRR1 (0x02) /* FB_RW */ -+#define MCF_GPIO_PCLRR_FBCTL_PCLRR2 (0x04) /* FB_TA */ -+#define MCF_GPIO_PCLRR_FBCTL_PCLRR3 (0x08) /* FB_OE */ -+ -+/* Bit definitions and macros for PCLRR_BE */ -+#define MCF_GPIO_PCLRR_BE_PCLRR0 (0x01) /* FB_BE/BWE0 / FB_SIZ0 */ -+#define MCF_GPIO_PCLRR_BE_PCLRR1 (0x02) /* FB_BE/BWE1 / FB_SIZ1 */ -+#define MCF_GPIO_PCLRR_BE_PCLRR2 (0x04) /* FB_BE/BWE2 / FB_SIZ2 */ -+#define MCF_GPIO_PCLRR_BE_PCLRR3 (0x08) /* FB_BE/BWE3 / FB_SIZ3 */ -+ -+/* Bit definitions and macros for PCLRR_CS */ -+#define MCF_GPIO_PCLRR_CS_PCLRR1 (0x02) /* FB_CS1 */ -+#define MCF_GPIO_PCLRR_CS_PCLRR2 (0x04) /* FB_CS2 */ -+#define MCF_GPIO_PCLRR_CS_PCLRR3 (0x08) /* FB_CS3 */ -+ -+/* Bit definitions and macros for PCLRR_DMA */ -+#define MCF_GPIO_PCLRR_DMA_PCLRR0 (0x01) /* DREQ0 */ -+#define MCF_GPIO_PCLRR_DMA_PCLRR1 (0x02) /* DACK0 / DSPI_PCS3 */ -+#define MCF_GPIO_PCLRR_DMA_PCLRR2 (0x04) /* DREQ1 / USB_CLKIN */ -+#define MCF_GPIO_PCLRR_DMA_PCLRR3 (0x08) /* DACK1 / ULPI_DIR */ -+ -+/* Bit definitions and macros for PCLRR_FECI2C */ -+#define MCF_GPIO_PCLRR_FECI2C_PCLRR0 (0x01) /* I2C_SDA / U2RXD */ -+#define MCF_GPIO_PCLRR_FECI2C_PCLRR1 (0x02) /* I2C_SCL / U2TXD */ -+#define MCF_GPIO_PCLRR_FECI2C_PCLRR2 (0x04) /* FEC0_MDIO */ -+#define MCF_GPIO_PCLRR_FECI2C_PCLRR3 (0x08) /* FEC0_MDC */ -+#define MCF_GPIO_PCLRR_FECI2C_PCLRR4 (0x10) /* FEC1_MDIO / ATA_DIOW */ -+#define MCF_GPIO_PCLRR_FECI2C_PCLRR5 (0x20) /* FEC1_MDC / ATA_DIOR */ -+ -+/* Bit definitions and macros for PCLRR_UART */ -+#define MCF_GPIO_PCLRR_UART_PCLRR0 (0x01) /* U1TXD */ -+#define MCF_GPIO_PCLRR_UART_PCLRR1 (0x02) /* U1RXD */ -+#define MCF_GPIO_PCLRR_UART_PCLRR2 (0x04) /* U1RTS */ -+#define MCF_GPIO_PCLRR_UART_PCLRR3 (0x08) /* U0CTS */ -+#define MCF_GPIO_PCLRR_UART_PCLRR4 (0x10) /* U1TXD */ -+#define MCF_GPIO_PCLRR_UART_PCLRR5 (0x20) /* U1RXD */ -+#define MCF_GPIO_PCLRR_UART_PCLRR6 (0x40) /* U1RTS */ -+#define MCF_GPIO_PCLRR_UART_PCLRR7 (0x80) /* U1CTS */ -+ -+/* Bit definitions and macros for PCLRR_DSPI */ -+#define MCF_GPIO_PCLRR_DSPI_PCLRR0 (0x01) /* DSPI_SOUT / SBF_DO */ -+#define MCF_GPIO_PCLRR_DSPI_PCLRR1 (0x02) /* DSPI_SIN / SBF_DI */ -+#define MCF_GPIO_PCLRR_DSPI_PCLRR2 (0x04) /* DSPI_SCK / SBF_CK */ -+#define MCF_GPIO_PCLRR_DSPI_PCLRR3 (0x08) /* DSPI_PCS0/SS */ -+#define MCF_GPIO_PCLRR_DSPI_PCLRR4 (0x10) /* DSPI_PCS1 / SBF_CS */ -+#define MCF_GPIO_PCLRR_DSPI_PCLRR5 (0x20) /* DSPI_PCS2 */ -+#define MCF_GPIO_PCLRR_DSPI_PCLRR6 (0x40) /* DSPI_PCS5/SS */ -+ -+/* Bit definitions and macros for PCLRR_TIMER */ -+#define MCF_GPIO_PCLRR_TIMER_PCLRR0 (0x01) /* T0IN / T0OUT / U2RTS */ -+#define MCF_GPIO_PCLRR_TIMER_PCLRR1 (0x02) /* T1IN / T1OUT / U2CTS */ -+#define MCF_GPIO_PCLRR_TIMER_PCLRR2 (0x04) /* T2IN / T2OUT / U2TXD */ -+#define MCF_GPIO_PCLRR_TIMER_PCLRR3 (0x08) /* T3IN / T3OUT / U2RXD */ -+ -+/* Bit definitions and macros for PCLRR_PCI */ -+#define MCF_GPIO_PCLRR_PCI_PCLRR0 (0x01) /* PCI_REQ0/PCI_EXTGNT */ -+#define MCF_GPIO_PCLRR_PCI_PCLRR1 (0x02) /* PCI_REQ1 */ -+#define MCF_GPIO_PCLRR_PCI_PCLRR2 (0x04) /* PCI_REQ2 */ -+#define MCF_GPIO_PCLRR_PCI_PCLRR3 (0x08) /* PCI_REQ3 / ATA_INTR */ -+#define MCF_GPIO_PCLRR_PCI_PCLRR4 (0x10) /* PCI_GNT0/PCI_EXTREQ */ -+#define MCF_GPIO_PCLRR_PCI_PCLRR5 (0x20) /* PCI_GNT1 / */ -+#define MCF_GPIO_PCLRR_PCI_PCLRR6 (0x40) /* PCI_GNT2 / */ -+#define MCF_GPIO_PCLRR_PCI_PCLRR7 (0x80) /* PCI_GNT3 / ATA_DMACK */ -+ -+/* Bit definitions and macros for PCLRR_USB */ -+#define MCF_GPIO_PCLRR_USB_PCLRR0 (0x01) /* USB_VBUS_OC / ULPI_STP */ -+#define MCF_GPIO_PCLRR_USB_PCLRR1 (0x02) /* USB_VBUS_EN / USB_PULLUP / ULPI_NXT */ -+ -+/* Bit definitions and macros for PCLRR_ATAH */ -+#define MCF_GPIO_PCLRR_ATAH_PCLRR0 (0x01) /* ATA_DA0 */ -+#define MCF_GPIO_PCLRR_ATAH_PCLRR1 (0x02) /* ATA_DA1 */ -+#define MCF_GPIO_PCLRR_ATAH_PCLRR2 (0x04) /* ATA_DA2 */ -+#define MCF_GPIO_PCLRR_ATAH_PCLRR3 (0x08) /* ATA_CS0 */ -+#define MCF_GPIO_PCLRR_ATAH_PCLRR4 (0x10) /* ATA_CS1 */ -+#define MCF_GPIO_PCLRR_ATAH_PCLRR5 (0x20) /* ATA_BUFFER_EN */ -+ -+/* Bit definitions and macros for PCLRR_ATAL */ -+#define MCF_GPIO_PCLRR_ATAL_PCLRR0 (0x01) /* ATA_IORDY */ -+#define MCF_GPIO_PCLRR_ATAL_PCLRR1 (0x02) /* ATA_DMARQ */ -+#define MCF_GPIO_PCLRR_ATAL_PCLRR2 (0x04) /* ATA_RESET */ -+ -+/* Bit definitions and macros for PCLRR_FEC1H */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRR0 (0x01) /* FEC1_CRS / ATA_DATA6 */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRR1 (0x02) /* FEC1_RXD0 / FEC1_RMII_RXD0 / ATA_DATA13 */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRR2 (0x04) /* FEC1_RXDV / FEC1_RMII_CRS_DV / ATA_DATA15 */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRR3 (0x08) /* FEC1_RXCLK / ATA_DATA5 */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRR4 (0x10) /* FEC1_COL / ATA_DATA7 */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRR5 (0x20) /* FEC1_TXD0 / FEC1_RMII_TXD0 / ATA_DATA9 */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRR6 (0x40) /* FEC1_TXEN / FEC1_RMII_TXEN / ATA_DATA8 */ -+#define MCF_GPIO_PCLRR_FEC1H_PCLRR7 (0x80) /* FEC1_TXCLK / FEC1_RMII_REF_CLK / ATA_DATA11 */ -+ -+/* Bit definitions and macros for PCLRR_FEC1L */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRR0 (0x01) /* FEC1_RXER / FEC1_RMII_RXER / ATA_DATA12 */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRR1 (0x02) /* FEC1_RXD1 / FEC1_RMII_RXD1 / ATA_DATA14 */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRR2 (0x04) /* FEC1_RXD2 / ATA_DATA3 */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRR3 (0x08) /* FEC1_RXD3 / ATA_DATA4 */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRR4 (0x10) /* FEC1_TXER / ATA_DATA0 */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRR5 (0x20) /* FEC1_TXD1 / FEC1_RMII_TXD1 / ATA_DATA10 */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRR6 (0x40) /* FEC1_TXD2 / ATA_DATA1 */ -+#define MCF_GPIO_PCLRR_FEC1L_PCLRR7 (0x80) /* FEC1_TXD3 / ATA_DATA2 */ -+ -+/* Bit definitions and macros for PCLRR_FBADH */ -+#define MCF_GPIO_PCLRR_FBADH_PCLRR0 (0x01) /* FB_AD24 */ -+#define MCF_GPIO_PCLRR_FBADH_PCLRR1 (0x02) /* FB_AD25 */ -+#define MCF_GPIO_PCLRR_FBADH_PCLRR2 (0x04) /* FB_AD26 */ -+#define MCF_GPIO_PCLRR_FBADH_PCLRR3 (0x08) /* FB_AD27 */ -+#define MCF_GPIO_PCLRR_FBADH_PCLRR4 (0x10) /* FB_AD28 */ -+#define MCF_GPIO_PCLRR_FBADH_PCLRR5 (0x20) /* FB_AD29 */ -+#define MCF_GPIO_PCLRR_FBADH_PCLRR6 (0x40) /* FB_AD30 */ -+#define MCF_GPIO_PCLRR_FBADH_PCLRR7 (0x80) /* FB_AD31 */ -+ -+/* Bit definitions and macros for PCLRR_FBADMH */ -+#define MCF_GPIO_PCLRR_FBADMH_PCLRR0 (0x01) /* FB_AD16 */ -+#define MCF_GPIO_PCLRR_FBADMH_PCLRR1 (0x02) /* FB_AD17 */ -+#define MCF_GPIO_PCLRR_FBADMH_PCLRR2 (0x04) /* FB_AD18 */ -+#define MCF_GPIO_PCLRR_FBADMH_PCLRR3 (0x08) /* FB_AD19 */ -+#define MCF_GPIO_PCLRR_FBADMH_PCLRR4 (0x10) /* FB_AD20 */ -+#define MCF_GPIO_PCLRR_FBADMH_PCLRR5 (0x20) /* FB_AD21 */ -+#define MCF_GPIO_PCLRR_FBADMH_PCLRR6 (0x40) /* FB_AD22 */ -+#define MCF_GPIO_PCLRR_FBADMH_PCLRR7 (0x80) /* FB_AD23 */ -+ -+/* Bit definitions and macros for PCLRR_FBADML */ -+#define MCF_GPIO_PCLRR_FBADML_PCLRR0 (0x01) /* FB_AD8 */ -+#define MCF_GPIO_PCLRR_FBADML_PCLRR1 (0x02) /* FB_AD9 */ -+#define MCF_GPIO_PCLRR_FBADML_PCLRR2 (0x04) /* FB_AD10 */ -+#define MCF_GPIO_PCLRR_FBADML_PCLRR3 (0x08) /* FB_AD11 */ -+#define MCF_GPIO_PCLRR_FBADML_PCLRR4 (0x10) /* FB_AD12 */ -+#define MCF_GPIO_PCLRR_FBADML_PCLRR5 (0x20) /* FB_AD13 */ -+#define MCF_GPIO_PCLRR_FBADML_PCLRR6 (0x40) /* FB_AD14 */ -+#define MCF_GPIO_PCLRR_FBADML_PCLRR7 (0x80) /* FB_AD15 */ -+ -+/* Bit definitions and macros for PCLRR_FBADL */ -+#define MCF_GPIO_PCLRR_FBADL_PCLRR0 (0x01) /* FB_AD0 */ -+#define MCF_GPIO_PCLRR_FBADL_PCLRR1 (0x02) /* FB_AD1 */ -+#define MCF_GPIO_PCLRR_FBADL_PCLRR2 (0x04) /* FB_AD2 */ -+#define MCF_GPIO_PCLRR_FBADL_PCLRR3 (0x08) /* FB_AD3 */ -+#define MCF_GPIO_PCLRR_FBADL_PCLRR4 (0x10) /* FB_AD4 */ -+#define MCF_GPIO_PCLRR_FBADL_PCLRR5 (0x20) /* FB_AD5 */ -+#define MCF_GPIO_PCLRR_FBADL_PCLRR6 (0x40) /* FB_AD6 */ -+#define MCF_GPIO_PCLRR_FBADL_PCLRR7 (0x80) /* FB_AD7 */ -+ -+/* Bit definitions and macros for PAR_FEC */ -+#define MCF_GPIO_PAR_FEC_FEC0(x) (((x)&0x07)) -+#define MCF_GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4) -+#define MCF_GPIO_PAR_FEC_FEC1_MASK (0x8F) -+#define MCF_GPIO_PAR_FEC_FEC1_MII (0x70) -+#define MCF_GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30) -+#define MCF_GPIO_PAR_FEC_FEC1_RMII_ATA (0x20) -+#define MCF_GPIO_PAR_FEC_FEC1_ATA (0x10) -+#define MCF_GPIO_PAR_FEC_FEC1_GPIO (0x00) -+#define MCF_GPIO_PAR_FEC_FEC0_MASK (0xF8) -+#define MCF_GPIO_PAR_FEC_FEC0_MII (0x07) -+#define MCF_GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) -+#define MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02) -+#define MCF_GPIO_PAR_FEC_FEC0_ULPI (0x01) -+#define MCF_GPIO_PAR_FEC_FEC0_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_DMA */ -+#define MCF_GPIO_PAR_DMA_DREQ0 (0x01) -+#define MCF_GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2) -+#define MCF_GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6) -+#define MCF_GPIO_PAR_DMA_DACK1_MASK (0x3F) -+#define MCF_GPIO_PAR_DMA_DACK1_DACK1 (0xC0) -+#define MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40) -+#define MCF_GPIO_PAR_DMA_DACK1_GPIO (0x00) -+#define MCF_GPIO_PAR_DMA_DREQ1_MASK (0xCF) -+#define MCF_GPIO_PAR_DMA_DREQ1_DREQ1 (0x30) -+#define MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10) -+#define MCF_GPIO_PAR_DMA_DREQ1_GPIO (0x00) -+#define MCF_GPIO_PAR_DMA_DACK0_MASK (0xF3) -+#define MCF_GPIO_PAR_DMA_DACK0_DACK1 (0x0C) -+#define MCF_GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04) -+#define MCF_GPIO_PAR_DMA_DACK0_GPIO (0x00) -+#define MCF_GPIO_PAR_DMA_DREQ0_DREQ0 (0x01) -+#define MCF_GPIO_PAR_DMA_DREQ0_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_FBCTL */ -+#define MCF_GPIO_PAR_FBCTL_TS(x) (((x)&0x03)<<3) -+#define MCF_GPIO_PAR_FBCTL_RW (0x20) -+#define MCF_GPIO_PAR_FBCTL_TA (0x40) -+#define MCF_GPIO_PAR_FBCTL_OE (0x80) -+#define MCF_GPIO_PAR_FBCTL_OE_OE (0x80) -+#define MCF_GPIO_PAR_FBCTL_OE_GPIO (0x00) -+#define MCF_GPIO_PAR_FBCTL_TA_TA (0x40) -+#define MCF_GPIO_PAR_FBCTL_TA_GPIO (0x00) -+#define MCF_GPIO_PAR_FBCTL_RW_RW (0x20) -+#define MCF_GPIO_PAR_FBCTL_RW_GPIO (0x00) -+#define MCF_GPIO_PAR_FBCTL_TS_MASK (0xE7) -+#define MCF_GPIO_PAR_FBCTL_TS_TS (0x18) -+#define MCF_GPIO_PAR_FBCTL_TS_ALE (0x10) -+#define MCF_GPIO_PAR_FBCTL_TS_TBST (0x08) -+#define MCF_GPIO_PAR_FBCTL_TS_GPIO (0x80) -+ -+/* Bit definitions and macros for PAR_DSPI */ -+#define MCF_GPIO_PAR_DSPI_SCK (0x01) -+#define MCF_GPIO_PAR_DSPI_SOUT (0x02) -+#define MCF_GPIO_PAR_DSPI_SIN (0x04) -+#define MCF_GPIO_PAR_DSPI_PCS0 (0x08) -+#define MCF_GPIO_PAR_DSPI_PCS1 (0x10) -+#define MCF_GPIO_PAR_DSPI_PCS2 (0x20) -+#define MCF_GPIO_PAR_DSPI_PCS5 (0x40) -+#define MCF_GPIO_PAR_DSPI_PCS5_PCS5 (0x40) -+#define MCF_GPIO_PAR_DSPI_PCS5_GPIO (0x00) -+#define MCF_GPIO_PAR_DSPI_PCS2_PCS2 (0x20) -+#define MCF_GPIO_PAR_DSPI_PCS2_GPIO (0x00) -+#define MCF_GPIO_PAR_DSPI_PCS1_PCS1 (0x10) -+#define MCF_GPIO_PAR_DSPI_PCS1_GPIO (0x00) -+#define MCF_GPIO_PAR_DSPI_PCS0_PCS0 (0x08) -+#define MCF_GPIO_PAR_DSPI_PCS0_GPIO (0x00) -+#define MCF_GPIO_PAR_DSPI_SIN_SIN (0x04) -+#define MCF_GPIO_PAR_DSPI_SIN_GPIO (0x00) -+#define MCF_GPIO_PAR_DSPI_SOUT_SOUT (0x02) -+#define MCF_GPIO_PAR_DSPI_SOUT_GPIO (0x00) -+#define MCF_GPIO_PAR_DSPI_SCK_SCK (0x01) -+#define MCF_GPIO_PAR_DSPI_SCK_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_BE */ -+#define MCF_GPIO_PAR_BE_BE0 (0x01) -+#define MCF_GPIO_PAR_BE_BE1 (0x04) -+#define MCF_GPIO_PAR_BE_BE2(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_BE_BE3(x) (((x)&0x03)<<6) -+#define MCF_GPIO_PAR_BE_BE3_MASK (0x3F) -+#define MCF_GPIO_PAR_BE_BE3_BE3 (0xC0) -+#define MCF_GPIO_PAR_BE_BE3_TSIZ1 (0x80) -+#define MCF_GPIO_PAR_BE_BE3_GPIO (0x00) -+#define MCF_GPIO_PAR_BE_BE2_MASK (0xCF) -+#define MCF_GPIO_PAR_BE_BE2_BE2 (0x30) -+#define MCF_GPIO_PAR_BE_BE2_TSIZ0 (0x20) -+#define MCF_GPIO_PAR_BE_BE2_GPIO (0x00) -+#define MCF_GPIO_PAR_BE_BE1_BE1 (0x04) -+#define MCF_GPIO_PAR_BE_BE1_GPIO (0x00) -+#define MCF_GPIO_PAR_BE_BE0_BE0 (0x01) -+#define MCF_GPIO_PAR_BE_BE0_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_CS */ -+#define MCF_GPIO_PAR_CS_CS1 (0x02) -+#define MCF_GPIO_PAR_CS_CS2 (0x04) -+#define MCF_GPIO_PAR_CS_CS3 (0x08) -+#define MCF_GPIO_PAR_CS_CS3_CS3 (0x08) -+#define MCF_GPIO_PAR_CS_CS3_GPIO (0x00) -+#define MCF_GPIO_PAR_CS_CS2_CS2 (0x04) -+#define MCF_GPIO_PAR_CS_CS2_GPIO (0x00) -+#define MCF_GPIO_PAR_CS_CS1_CS1 (0x02) -+#define MCF_GPIO_PAR_CS_CS1_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_TIMER */ -+#define MCF_GPIO_PAR_TIMER_T0IN(x) (((x)&0x03)) -+#define MCF_GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) -+#define MCF_GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) -+#define MCF_GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) -+#define MCF_GPIO_PAR_TIMER_T3IN_MASK (0x3F) -+#define MCF_GPIO_PAR_TIMER_T3IN_T3IN (0xC0) -+#define MCF_GPIO_PAR_TIMER_T3IN_T3OUT (0x80) -+#define MCF_GPIO_PAR_TIMER_T3IN_U2RXD (0x40) -+#define MCF_GPIO_PAR_TIMER_T3IN_GPIO (0x00) -+#define MCF_GPIO_PAR_TIMER_T2IN_MASK (0xCF) -+#define MCF_GPIO_PAR_TIMER_T2IN_T2IN (0x30) -+#define MCF_GPIO_PAR_TIMER_T2IN_T2OUT (0x20) -+#define MCF_GPIO_PAR_TIMER_T2IN_U2TXD (0x10) -+#define MCF_GPIO_PAR_TIMER_T2IN_GPIO (0x00) -+#define MCF_GPIO_PAR_TIMER_T1IN_MASK (0xF3) -+#define MCF_GPIO_PAR_TIMER_T1IN_T1IN (0x0C) -+#define MCF_GPIO_PAR_TIMER_T1IN_T1OUT (0x08) -+#define MCF_GPIO_PAR_TIMER_T1IN_U2CTS (0x04) -+#define MCF_GPIO_PAR_TIMER_T1IN_GPIO (0x00) -+#define MCF_GPIO_PAR_TIMER_T0IN_MASK (0xFC) -+#define MCF_GPIO_PAR_TIMER_T0IN_T0IN (0x03) -+#define MCF_GPIO_PAR_TIMER_T0IN_T0OUT (0x02) -+#define MCF_GPIO_PAR_TIMER_T0IN_U2RTS (0x01) -+#define MCF_GPIO_PAR_TIMER_T0IN_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_USB */ -+#define MCF_GPIO_PAR_USB_VBUSOC(x) (((x)&0x03)) -+#define MCF_GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2) -+#define MCF_GPIO_PAR_USB_VBUSEN_MASK (0xF3) -+#define MCF_GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C) -+#define MCF_GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08) -+#define MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04) -+#define MCF_GPIO_PAR_USB_VBUSEN_GPIO (0x00) -+#define MCF_GPIO_PAR_USB_VBUSOC_MASK (0xFC) -+#define MCF_GPIO_PAR_USB_VBUSOC_VBUSOC (0x03) -+#define MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01) -+#define MCF_GPIO_PAR_USB_VBUSOC_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_UART */ -+#define MCF_GPIO_PAR_UART_U0TXD (0x01) -+#define MCF_GPIO_PAR_UART_U0RXD (0x02) -+#define MCF_GPIO_PAR_UART_U0RTS (0x04) -+#define MCF_GPIO_PAR_UART_U0CTS (0x08) -+#define MCF_GPIO_PAR_UART_U1TXD (0x10) -+#define MCF_GPIO_PAR_UART_U1RXD (0x20) -+#define MCF_GPIO_PAR_UART_U1RTS (0x40) -+#define MCF_GPIO_PAR_UART_U1CTS (0x80) -+#define MCF_GPIO_PAR_UART_U1CTS_U1CTS (0x80) -+#define MCF_GPIO_PAR_UART_U1CTS_GPIO (0x00) -+#define MCF_GPIO_PAR_UART_U1RTS_U1RTS (0x40) -+#define MCF_GPIO_PAR_UART_U1RTS_GPIO (0x00) -+#define MCF_GPIO_PAR_UART_U1RXD_U1RXD (0x20) -+#define MCF_GPIO_PAR_UART_U1RXD_GPIO (0x00) -+#define MCF_GPIO_PAR_UART_U1TXD_U1TXD (0x10) -+#define MCF_GPIO_PAR_UART_U1TXD_GPIO (0x00) -+#define MCF_GPIO_PAR_UART_U0CTS_U0CTS (0x08) -+#define MCF_GPIO_PAR_UART_U0CTS_GPIO (0x00) -+#define MCF_GPIO_PAR_UART_U0RTS_U0RTS (0x04) -+#define MCF_GPIO_PAR_UART_U0RTS_GPIO (0x00) -+#define MCF_GPIO_PAR_UART_U0RXD_U0RXD (0x02) -+#define MCF_GPIO_PAR_UART_U0RXD_GPIO (0x00) -+#define MCF_GPIO_PAR_UART_U0TXD_U0TXD (0x01) -+#define MCF_GPIO_PAR_UART_U0TXD_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_FECI2C */ -+#define MCF_GPIO_PAR_FECI2C_SDA(x) (((x)&0x0003)) -+#define MCF_GPIO_PAR_FECI2C_SCL(x) (((x)&0x0003)<<2) -+#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x0003)) -+#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x0003)<<2) -+#define MCF_GPIO_PAR_FECI2C_MDIO0 (0x0010) -+#define MCF_GPIO_PAR_FECI2C_MDC0 (0x0040) -+#define MCF_GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8) -+#define MCF_GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10) -+#define MCF_GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF) -+#define MCF_GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00) -+#define MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800) -+#define MCF_GPIO_PAR_FECI2C_MDC1_GPIO (0x0000) -+#define MCF_GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF) -+#define MCF_GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300) -+#define MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200) -+#define MCF_GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000) -+#define MCF_GPIO_PAR_FECI2C_MDC0_MDC0 (0x0040) -+#define MCF_GPIO_PAR_FECI2C_MDC0_GPIO (0x0000) -+#define MCF_GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010) -+#define MCF_GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000) -+#define MCF_GPIO_PAR_FECI2C_SCL_MASK (0xFFF3) -+#define MCF_GPIO_PAR_FECI2C_SCL_SCL (0x000C) -+#define MCF_GPIO_PAR_FECI2C_SCL_U2TXD (0x0004) -+#define MCF_GPIO_PAR_FECI2C_SCL_GPIO (0x0000) -+#define MCF_GPIO_PAR_FECI2C_SDA_MASK (0xFFFC) -+#define MCF_GPIO_PAR_FECI2C_SDA_SDA (0x0003) -+#define MCF_GPIO_PAR_FECI2C_SDA_U2RXD (0x0001) -+#define MCF_GPIO_PAR_FECI2C_SDA_GPIO (0x0000) -+ -+/* Bit definitions and macros for PAR_SSI */ -+#define MCF_GPIO_PAR_SSI_MCLK (0x0001) -+#define MCF_GPIO_PAR_SSI_STXD(x) (((x)&0x0003)<<2) -+#define MCF_GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4) -+#define MCF_GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6) -+#define MCF_GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8) -+#define MCF_GPIO_PAR_SSI_BCLK_MASK (0xFCFF) -+#define MCF_GPIO_PAR_SSI_BCLK_BCLK (0x0300) -+#define MCF_GPIO_PAR_SSI_BCLK_U1CTS (0x0200) -+#define MCF_GPIO_PAR_SSI_BCLK_GPIO (0x0000) -+#define MCF_GPIO_PAR_SSI_FS_MASK (0xFF3F) -+#define MCF_GPIO_PAR_SSI_FS_FS (0x00C0) -+#define MCF_GPIO_PAR_SSI_FS_U1RTS (0x0080) -+#define MCF_GPIO_PAR_SSI_FS_GPIO (0x0000) -+#define MCF_GPIO_PAR_SSI_SRXD_MASK (0xFFCF) -+#define MCF_GPIO_PAR_SSI_SRXD_SRXD (0x0030) -+#define MCF_GPIO_PAR_SSI_SRXD_U1RXD (0x0020) -+#define MCF_GPIO_PAR_SSI_SRXD_GPIO (0x0000) -+#define MCF_GPIO_PAR_SSI_STXD_MASK (0xFFF3) -+#define MCF_GPIO_PAR_SSI_STXD_STXD (0x000C) -+#define MCF_GPIO_PAR_SSI_STXD_U1TXD (0x0008) -+#define MCF_GPIO_PAR_SSI_STXD_GPIO (0x0000) -+#define MCF_GPIO_PAR_SSI_MCLK_MCLK (0x0001) -+#define MCF_GPIO_PAR_SSI_MCLK_GPIO (0x0000) -+ -+/* Bit definitions and macros for PAR_ATA */ -+#define MCF_GPIO_PAR_ATA_IORDY (0x0001) -+#define MCF_GPIO_PAR_ATA_DMARQ (0x0002) -+#define MCF_GPIO_PAR_ATA_RESET (0x0004) -+#define MCF_GPIO_PAR_ATA_DA0 (0x0020) -+#define MCF_GPIO_PAR_ATA_DA1 (0x0040) -+#define MCF_GPIO_PAR_ATA_DA2 (0x0080) -+#define MCF_GPIO_PAR_ATA_CS0 (0x0100) -+#define MCF_GPIO_PAR_ATA_CS1 (0x0200) -+#define MCF_GPIO_PAR_ATA_BUFEN (0x0400) -+#define MCF_GPIO_PAR_ATA_BUFEN_BUFEN (0x0400) -+#define MCF_GPIO_PAR_ATA_BUFEN_GPIO (0x0000) -+#define MCF_GPIO_PAR_ATA_CS1_CS1 (0x0200) -+#define MCF_GPIO_PAR_ATA_CS1_GPIO (0x0000) -+#define MCF_GPIO_PAR_ATA_CS0_CS0 (0x0100) -+#define MCF_GPIO_PAR_ATA_CS0_GPIO (0x0000) -+#define MCF_GPIO_PAR_ATA_DA2_DA2 (0x0080) -+#define MCF_GPIO_PAR_ATA_DA2_GPIO (0x0000) -+#define MCF_GPIO_PAR_ATA_DA1_DA1 (0x0040) -+#define MCF_GPIO_PAR_ATA_DA1_GPIO (0x0000) -+#define MCF_GPIO_PAR_ATA_DA0_DA0 (0x0020) -+#define MCF_GPIO_PAR_ATA_DA0_GPIO (0x0000) -+#define MCF_GPIO_PAR_ATA_RESET_RESET (0x0004) -+#define MCF_GPIO_PAR_ATA_RESET_GPIO (0x0000) -+#define MCF_GPIO_PAR_ATA_DMARQ_DMARQ (0x0002) -+#define MCF_GPIO_PAR_ATA_DMARQ_GPIO (0x0000) -+#define MCF_GPIO_PAR_ATA_IORDY_IORDY (0x0001) -+#define MCF_GPIO_PAR_ATA_IORDY_GPIO (0x0000) -+ -+/* Bit definitions and macros for PAR_IRQ */ -+#define MCF_GPIO_PAR_IRQ_IRQ1 (0x02) -+#define MCF_GPIO_PAR_IRQ_IRQ4 (0x10) -+#define MCF_GPIO_PAR_IRQ_IRQ4_IRQ4 (0x10) -+#define MCF_GPIO_PAR_IRQ_IRQ4_GPIO (0x00) -+#define MCF_GPIO_PAR_IRQ_IRQ1_IRQ1 (0x02) -+#define MCF_GPIO_PAR_IRQ_IRQ1_GPIO (0x00) -+ -+/* Bit definitions and macros for PAR_PCI */ -+#define MCF_GPIO_PAR_PCI_REQ0 (0x0001) -+#define MCF_GPIO_PAR_PCI_REQ1 (0x0004) -+#define MCF_GPIO_PAR_PCI_REQ2 (0x0010) -+#define MCF_GPIO_PAR_PCI_REQ3(x) (((x)&0x0003)<<6) -+#define MCF_GPIO_PAR_PCI_GNT0 (0x0100) -+#define MCF_GPIO_PAR_PCI_GNT1 (0x0400) -+#define MCF_GPIO_PAR_PCI_GNT2 (0x1000) -+#define MCF_GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14) -+#define MCF_GPIO_PAR_PCI_GNT3_MASK (0x3FFF) -+#define MCF_GPIO_PAR_PCI_GNT3_GNT3 (0xC000) -+#define MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000) -+#define MCF_GPIO_PAR_PCI_GNT3_GPIO (0x0000) -+#define MCF_GPIO_PAR_PCI_GNT2_GNT2 (0x1000) -+#define MCF_GPIO_PAR_PCI_GNT2_GPIO (0x0000) -+#define MCF_GPIO_PAR_PCI_GNT1_GNT1 (0x0400) -+#define MCF_GPIO_PAR_PCI_GNT1_GPIO (0x0000) -+#define MCF_GPIO_PAR_PCI_GNT0_GNT0 (0x0100) -+#define MCF_GPIO_PAR_PCI_GNT0_GPIO (0x0000) -+#define MCF_GPIO_PAR_PCI_REQ3_MASK (0xFF3F) -+#define MCF_GPIO_PAR_PCI_REQ3_REQ3 (0x00C0) -+#define MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080) -+#define MCF_GPIO_PAR_PCI_REQ3_GPIO (0x0000) -+#define MCF_GPIO_PAR_PCI_REQ2_REQ2 (0x0010) -+#define MCF_GPIO_PAR_PCI_REQ2_GPIO (0x0000) -+#define MCF_GPIO_PAR_PCI_REQ1_REQ1 (0x0040) -+#define MCF_GPIO_PAR_PCI_REQ1_GPIO (0x0000) -+#define MCF_GPIO_PAR_PCI_REQ0_REQ0 (0x0001) -+#define MCF_GPIO_PAR_PCI_REQ0_GPIO (0x0000) -+ -+/* Bit definitions and macros for MSCR_SDRAM */ -+#define MCF_GPIO_MSCR_SDRAM_SDCTL(x) (((x)&0x03)) -+#define MCF_GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) -+#define MCF_GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4) -+#define MCF_GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6) -+#define MCF_GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F) -+#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0) -+#define MCF_GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80) -+#define MCF_GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40) -+#define MCF_GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00) -+#define MCF_GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF) -+#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30) -+#define MCF_GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20) -+#define MCF_GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10) -+#define MCF_GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00) -+#define MCF_GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) -+#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C) -+#define MCF_GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08) -+#define MCF_GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04) -+#define MCF_GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00) -+#define MCF_GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) -+#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03) -+#define MCF_GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02) -+#define MCF_GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01) -+#define MCF_GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR (0x00) -+ -+/* Bit definitions and macros for MSCR_PCI */ -+#define MCF_GPIO_MSCR_PCI_PCI (0x01) -+#define MCF_GPIO_MSCR_PCI_PCI_HI_66MHZ (0x01) -+#define MCF_GPIO_MSCR_PCI_PCI_LO_33MHZ (0x00) -+ -+/* Bit definitions and macros for DSCR_I2C */ -+#define MCF_GPIO_DSCR_I2C_I2C(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_I2C_I2C_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_FLEXBUS */ -+#define MCF_GPIO_DSCR_FLEXBUS_FBADL(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADH(x) (((x)&0x03)<<2) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL(x) (((x)&0x03)<<4) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK(x) (((x)&0x03)<<6) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF (0xC0) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30P (0x80) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF (0x40) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF (0x00) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF (0x30) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF (0x20) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF (0x10) -+#define MCF_GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF (0x00) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF (0x0C) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF (0x08) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF (0x04) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF (0x00) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_FEC */ -+#define MCF_GPIO_DSCR_FEC_FEC0(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_FEC_FEC1(x) (((x)&0x03)<<2) -+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_50PF (0x0C) -+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_30PF (0x08) -+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_20PF (0x04) -+#define MCF_GPIO_DSCR_FEC_FEC1_LOAD_10PF (0x00) -+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_FEC_FEC0_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_UART */ -+#define MCF_GPIO_DSCR_UART_UART0(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_UART_UART1(x) (((x)&0x03)<<2) -+#define MCF_GPIO_DSCR_UART_UART1_LOAD_50PF (0x0C) -+#define MCF_GPIO_DSCR_UART_UART1_LOAD_30PF (0x08) -+#define MCF_GPIO_DSCR_UART_UART1_LOAD_20PF (0x04) -+#define MCF_GPIO_DSCR_UART_UART1_LOAD_10PF (0x00) -+#define MCF_GPIO_DSCR_UART_UART0_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_UART_UART0_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_UART_UART0_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_UART_UART0_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_DSPI */ -+#define MCF_GPIO_DSCR_DSPI_DSPI(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_DSPI_DSPI_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_TIMER */ -+#define MCF_GPIO_DSCR_TIMER_TIMER(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_TIMER_TIMER_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_SSI */ -+#define MCF_GPIO_DSCR_SSI_SSI(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_DMA */ -+#define MCF_GPIO_DSCR_DMA_DMA(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_DMA_DMA_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_DEBUG */ -+#define MCF_GPIO_DSCR_DEBUG_DEBUG(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_RESET */ -+#define MCF_GPIO_DSCR_RESET_RESET(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_RESET_RESET_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_IRQ */ -+#define MCF_GPIO_DSCR_IRQ_IRQ(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_IRQ_IRQ_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_USB */ -+#define MCF_GPIO_DSCR_USB_USB(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_USB_USB_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_USB_USB_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_USB_USB_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_USB_USB_LOAD_10PF (0x00) -+ -+/* Bit definitions and macros for DSCR_ATA */ -+#define MCF_GPIO_DSCR_ATA_ATA(x) (((x)&0x03)) -+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_50PF (0x03) -+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_30PF (0x02) -+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_20PF (0x01) -+#define MCF_GPIO_DSCR_ATA_ATA_LOAD_10PF (0x00) -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_GPIO_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_i2c.h -@@ -0,0 +1,39 @@ -+/* -+ * Matt Waddel Matt.Waddel@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_I2C_H__ -+#define __MCF5445X_I2C_H__ -+ -+/********************************************************************* -+* -+* I2C Module (I2C) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_I2C_I2ADR (volatile u8 *)(0xFC058000) -+#define MCF_I2C_I2FDR (volatile u8 *)(0xFC058004) -+#define MCF_I2C_I2CR (volatile u8 *)(0xFC058008) -+#define MCF_I2C_I2SR (volatile u8 *)(0xFC05800C) -+#define MCF_I2C_I2DR (volatile u8 *)(0xFC058010) -+ -+/* Bit definitions and macros for I2AR */ -+#define MCF_I2C_I2AR_ADR(x) (((x)&0x7F)<<1) -+ -+/* Bit definitions and macros for I2FDR */ -+#define MCF_I2C_I2FDR_IC(x) (((x)&0x3F)) -+ -+/* Bit definitions and macros for I2DR */ -+#define MCF_I2C_I2DR_DATA(x) (x) -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_I2C_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_intc.h -@@ -0,0 +1,724 @@ -+/* -+ * Matt Waddel Matt.Waddel@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_INTC_H__ -+#define __MCF5445X_INTC_H__ -+ -+/********************************************************************* -+* -+* Interrupt Controller (INTC) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_INTC0_IPRH MCF_REG32(0xFC048000) -+#define MCF_INTC0_IPRL MCF_REG32(0xFC048004) -+#define MCF_INTC0_IMRH MCF_REG32(0xFC048008) -+#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) -+#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) -+#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) -+#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) -+#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) -+#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) -+#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) -+#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) -+#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) -+#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) -+#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) -+#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) -+#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) -+#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) -+#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) -+#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) -+#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) -+#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) -+#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) -+#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) -+#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) -+#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) -+#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) -+#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) -+#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) -+#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) -+#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) -+#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) -+#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) -+#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) -+#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) -+#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) -+#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) -+#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) -+#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) -+#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) -+#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) -+#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) -+#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) -+#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) -+#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) -+#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) -+#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) -+#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) -+#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) -+#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) -+#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) -+#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) -+#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) -+#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) -+#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) -+#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) -+#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) -+#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) -+#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) -+#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) -+#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) -+#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) -+#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) -+#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) -+#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) -+#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) -+#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) -+#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) -+#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) -+#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) -+#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) -+#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) -+#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) -+#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) -+#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) -+#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) -+#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) -+#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) -+#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) -+#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) -+#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) -+#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) -+#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) -+#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) -+#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) -+#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) -+#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) -+#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) -+#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) -+#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) -+#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) -+#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) -+#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) -+#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) -+#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) -+#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) -+#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) -+#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) -+#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) -+#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) -+#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) -+#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) -+#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) -+#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) -+#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) -+#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) -+#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) -+#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) -+#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) -+#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) -+#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) -+#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) -+#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) -+#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) -+#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) -+#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) -+#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) -+#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) -+#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) -+#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) -+#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) -+#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) -+#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) -+#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) -+#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) -+#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) -+#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) -+#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) -+#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) -+#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) -+#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) -+#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) -+#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) -+#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) -+#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) -+#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) -+#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) -+#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) -+#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) -+#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) -+#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) -+#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) -+#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) -+#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) -+#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) -+#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) -+#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) -+#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) -+#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) -+#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) -+#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) -+#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) -+#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) -+#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) -+#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) -+#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) -+#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) -+#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) -+#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) -+#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) -+#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) -+#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) -+#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) -+#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8 -+#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) -+ -+/* Parameterized register read/write macros for multiple registers */ -+#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048041+((x-1)*0x001)) -+#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x-1)*0x004)) -+#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C041+((x-1)*0x001)) -+#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x-1)*0x004)) -+ -+/* Parameterized register read/write macros for multiple modules */ -+#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) -+#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) -+#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) -+#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) -+#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) -+#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) -+#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) -+#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) -+#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) -+#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) -+#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) -+#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) -+#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) -+#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) -+#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) -+#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) -+#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) -+#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) -+#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) -+#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) -+#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) -+#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) -+#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) -+#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) -+#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) -+#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) -+#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) -+#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) -+#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) -+#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) -+#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) -+#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) -+#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) -+#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) -+#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) -+#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) -+#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) -+#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) -+#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) -+#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) -+#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) -+#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) -+#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) -+#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) -+#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) -+#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) -+#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) -+#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) -+#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) -+#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) -+#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) -+#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) -+#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) -+#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) -+#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) -+#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) -+#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) -+#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) -+#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) -+#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) -+#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) -+#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) -+#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) -+#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) -+#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) -+#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) -+#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) -+#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) -+#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) -+#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) -+#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) -+#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) -+#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) -+#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) -+#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) -+#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) -+#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) -+#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) -+#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) -+#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) -+#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) -+#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) -+ -+/* Bit definitions and macros for IPRH */ -+#define MCF_INTC_IPRH_INT32 (0x00000001) -+#define MCF_INTC_IPRH_INT33 (0x00000002) -+#define MCF_INTC_IPRH_INT34 (0x00000004) -+#define MCF_INTC_IPRH_INT35 (0x00000008) -+#define MCF_INTC_IPRH_INT36 (0x00000010) -+#define MCF_INTC_IPRH_INT37 (0x00000020) -+#define MCF_INTC_IPRH_INT38 (0x00000040) -+#define MCF_INTC_IPRH_INT39 (0x00000080) -+#define MCF_INTC_IPRH_INT40 (0x00000100) -+#define MCF_INTC_IPRH_INT41 (0x00000200) -+#define MCF_INTC_IPRH_INT42 (0x00000400) -+#define MCF_INTC_IPRH_INT43 (0x00000800) -+#define MCF_INTC_IPRH_INT44 (0x00001000) -+#define MCF_INTC_IPRH_INT45 (0x00002000) -+#define MCF_INTC_IPRH_INT46 (0x00004000) -+#define MCF_INTC_IPRH_INT47 (0x00008000) -+#define MCF_INTC_IPRH_INT48 (0x00010000) -+#define MCF_INTC_IPRH_INT49 (0x00020000) -+#define MCF_INTC_IPRH_INT50 (0x00040000) -+#define MCF_INTC_IPRH_INT51 (0x00080000) -+#define MCF_INTC_IPRH_INT52 (0x00100000) -+#define MCF_INTC_IPRH_INT53 (0x00200000) -+#define MCF_INTC_IPRH_INT54 (0x00400000) -+#define MCF_INTC_IPRH_INT55 (0x00800000) -+#define MCF_INTC_IPRH_INT56 (0x01000000) -+#define MCF_INTC_IPRH_INT57 (0x02000000) -+#define MCF_INTC_IPRH_INT58 (0x04000000) -+#define MCF_INTC_IPRH_INT59 (0x08000000) -+#define MCF_INTC_IPRH_INT60 (0x10000000) -+#define MCF_INTC_IPRH_INT61 (0x20000000) -+#define MCF_INTC_IPRH_INT62 (0x40000000) -+#define MCF_INTC_IPRH_INT63 (0x80000000) -+ -+/* Bit definitions and macros for IPRL */ -+#define MCF_INTC_IPRL_INT0 (0x00000001) -+#define MCF_INTC_IPRL_INT1 (0x00000002) -+#define MCF_INTC_IPRL_INT2 (0x00000004) -+#define MCF_INTC_IPRL_INT3 (0x00000008) -+#define MCF_INTC_IPRL_INT4 (0x00000010) -+#define MCF_INTC_IPRL_INT5 (0x00000020) -+#define MCF_INTC_IPRL_INT6 (0x00000040) -+#define MCF_INTC_IPRL_INT7 (0x00000080) -+#define MCF_INTC_IPRL_INT8 (0x00000100) -+#define MCF_INTC_IPRL_INT9 (0x00000200) -+#define MCF_INTC_IPRL_INT10 (0x00000400) -+#define MCF_INTC_IPRL_INT11 (0x00000800) -+#define MCF_INTC_IPRL_INT12 (0x00001000) -+#define MCF_INTC_IPRL_INT13 (0x00002000) -+#define MCF_INTC_IPRL_INT14 (0x00004000) -+#define MCF_INTC_IPRL_INT15 (0x00008000) -+#define MCF_INTC_IPRL_INT16 (0x00010000) -+#define MCF_INTC_IPRL_INT17 (0x00020000) -+#define MCF_INTC_IPRL_INT18 (0x00040000) -+#define MCF_INTC_IPRL_INT19 (0x00080000) -+#define MCF_INTC_IPRL_INT20 (0x00100000) -+#define MCF_INTC_IPRL_INT21 (0x00200000) -+#define MCF_INTC_IPRL_INT22 (0x00400000) -+#define MCF_INTC_IPRL_INT23 (0x00800000) -+#define MCF_INTC_IPRL_INT24 (0x01000000) -+#define MCF_INTC_IPRL_INT25 (0x02000000) -+#define MCF_INTC_IPRL_INT26 (0x04000000) -+#define MCF_INTC_IPRL_INT27 (0x08000000) -+#define MCF_INTC_IPRL_INT28 (0x10000000) -+#define MCF_INTC_IPRL_INT29 (0x20000000) -+#define MCF_INTC_IPRL_INT30 (0x40000000) -+#define MCF_INTC_IPRL_INT31 (0x80000000) -+ -+/* Bit definitions and macros for IMRH */ -+#define MCF_INTC_IMRH_INT_MASK32 (0x00000001) -+#define MCF_INTC_IMRH_INT_MASK33 (0x00000002) -+#define MCF_INTC_IMRH_INT_MASK34 (0x00000004) -+#define MCF_INTC_IMRH_INT_MASK35 (0x00000008) -+#define MCF_INTC_IMRH_INT_MASK36 (0x00000010) -+#define MCF_INTC_IMRH_INT_MASK37 (0x00000020) -+#define MCF_INTC_IMRH_INT_MASK38 (0x00000040) -+#define MCF_INTC_IMRH_INT_MASK39 (0x00000080) -+#define MCF_INTC_IMRH_INT_MASK40 (0x00000100) -+#define MCF_INTC_IMRH_INT_MASK41 (0x00000200) -+#define MCF_INTC_IMRH_INT_MASK42 (0x00000400) -+#define MCF_INTC_IMRH_INT_MASK43 (0x00000800) -+#define MCF_INTC_IMRH_INT_MASK44 (0x00001000) -+#define MCF_INTC_IMRH_INT_MASK45 (0x00002000) -+#define MCF_INTC_IMRH_INT_MASK46 (0x00004000) -+#define MCF_INTC_IMRH_INT_MASK47 (0x00008000) -+#define MCF_INTC_IMRH_INT_MASK48 (0x00010000) -+#define MCF_INTC_IMRH_INT_MASK49 (0x00020000) -+#define MCF_INTC_IMRH_INT_MASK50 (0x00040000) -+#define MCF_INTC_IMRH_INT_MASK51 (0x00080000) -+#define MCF_INTC_IMRH_INT_MASK52 (0x00100000) -+#define MCF_INTC_IMRH_INT_MASK53 (0x00200000) -+#define MCF_INTC_IMRH_INT_MASK54 (0x00400000) -+#define MCF_INTC_IMRH_INT_MASK55 (0x00800000) -+#define MCF_INTC_IMRH_INT_MASK56 (0x01000000) -+#define MCF_INTC_IMRH_INT_MASK57 (0x02000000) -+#define MCF_INTC_IMRH_INT_MASK58 (0x04000000) -+#define MCF_INTC_IMRH_INT_MASK59 (0x08000000) -+#define MCF_INTC_IMRH_INT_MASK60 (0x10000000) -+#define MCF_INTC_IMRH_INT_MASK61 (0x20000000) -+#define MCF_INTC_IMRH_INT_MASK62 (0x40000000) -+#define MCF_INTC_IMRH_INT_MASK63 (0x80000000) -+ -+/* Bit definitions and macros for IMRL */ -+#define MCF_INTC_IMRL_INT_MASK0 (0x00000001) -+#define MCF_INTC_IMRL_INT_MASK1 (0x00000002) -+#define MCF_INTC_IMRL_INT_MASK2 (0x00000004) -+#define MCF_INTC_IMRL_INT_MASK3 (0x00000008) -+#define MCF_INTC_IMRL_INT_MASK4 (0x00000010) -+#define MCF_INTC_IMRL_INT_MASK5 (0x00000020) -+#define MCF_INTC_IMRL_INT_MASK6 (0x00000040) -+#define MCF_INTC_IMRL_INT_MASK7 (0x00000080) -+#define MCF_INTC_IMRL_INT_MASK8 (0x00000100) -+#define MCF_INTC_IMRL_INT_MASK9 (0x00000200) -+#define MCF_INTC_IMRL_INT_MASK10 (0x00000400) -+#define MCF_INTC_IMRL_INT_MASK11 (0x00000800) -+#define MCF_INTC_IMRL_INT_MASK12 (0x00001000) -+#define MCF_INTC_IMRL_INT_MASK13 (0x00002000) -+#define MCF_INTC_IMRL_INT_MASK14 (0x00004000) -+#define MCF_INTC_IMRL_INT_MASK15 (0x00008000) -+#define MCF_INTC_IMRL_INT_MASK16 (0x00010000) -+#define MCF_INTC_IMRL_INT_MASK17 (0x00020000) -+#define MCF_INTC_IMRL_INT_MASK18 (0x00040000) -+#define MCF_INTC_IMRL_INT_MASK19 (0x00080000) -+#define MCF_INTC_IMRL_INT_MASK20 (0x00100000) -+#define MCF_INTC_IMRL_INT_MASK21 (0x00200000) -+#define MCF_INTC_IMRL_INT_MASK22 (0x00400000) -+#define MCF_INTC_IMRL_INT_MASK23 (0x00800000) -+#define MCF_INTC_IMRL_INT_MASK24 (0x01000000) -+#define MCF_INTC_IMRL_INT_MASK25 (0x02000000) -+#define MCF_INTC_IMRL_INT_MASK26 (0x04000000) -+#define MCF_INTC_IMRL_INT_MASK27 (0x08000000) -+#define MCF_INTC_IMRL_INT_MASK28 (0x10000000) -+#define MCF_INTC_IMRL_INT_MASK29 (0x20000000) -+#define MCF_INTC_IMRL_INT_MASK30 (0x40000000) -+#define MCF_INTC_IMRL_INT_MASK31 (0x80000000) -+ -+/* Bit definitions and macros for INTFRCH */ -+#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) -+#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) -+#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) -+#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) -+#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) -+#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) -+#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) -+#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) -+#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) -+#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) -+#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) -+#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) -+#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) -+#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) -+#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) -+#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) -+#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) -+#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) -+#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) -+#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) -+#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) -+#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) -+#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) -+#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) -+#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) -+#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) -+#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) -+#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) -+#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) -+#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) -+#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) -+#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) -+ -+/* Bit definitions and macros for INTFRCL */ -+#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) -+#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) -+#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) -+#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) -+#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) -+#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) -+#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) -+#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) -+#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) -+#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) -+#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) -+#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) -+#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) -+#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) -+#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) -+#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) -+#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) -+#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) -+#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) -+#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) -+#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) -+#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) -+#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) -+#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) -+#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) -+#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) -+#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) -+#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) -+#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) -+#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) -+#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) -+#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) -+ -+/* Bit definitions and macros for ICONFIG */ -+#define MCF_INTC_ICONFIG_EMASK (0x0020) -+#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) -+#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) -+#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) -+#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) -+#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) -+#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) -+#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) -+ -+/* Bit definitions and macros for SIMR */ -+#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)) -+ -+/* Bit definitions and macros for CIMR */ -+#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)) -+ -+/* Bit definitions and macros for CLMASK */ -+#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)) -+ -+/* Bit definitions and macros for SLMASK */ -+#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)) -+ -+/* Bit definitions and macros for ICR group */ -+#define MCF_INTC_ICR_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR1 */ -+#define MCF_INTC_ICR1_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR2 */ -+#define MCF_INTC_ICR2_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR3 */ -+#define MCF_INTC_ICR3_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR4 */ -+#define MCF_INTC_ICR4_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR5 */ -+#define MCF_INTC_ICR5_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR6 */ -+#define MCF_INTC_ICR6_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR7 */ -+#define MCF_INTC_ICR7_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR8 */ -+#define MCF_INTC_ICR8_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR9 */ -+#define MCF_INTC_ICR9_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR10 */ -+#define MCF_INTC_ICR10_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR11 */ -+#define MCF_INTC_ICR11_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR12 */ -+#define MCF_INTC_ICR12_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR13 */ -+#define MCF_INTC_ICR13_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR14 */ -+#define MCF_INTC_ICR14_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR15 */ -+#define MCF_INTC_ICR15_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR16 */ -+#define MCF_INTC_ICR16_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR17 */ -+#define MCF_INTC_ICR17_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR18 */ -+#define MCF_INTC_ICR18_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR19 */ -+#define MCF_INTC_ICR19_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR20 */ -+#define MCF_INTC_ICR20_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR21 */ -+#define MCF_INTC_ICR21_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR22 */ -+#define MCF_INTC_ICR22_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR23 */ -+#define MCF_INTC_ICR23_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR24 */ -+#define MCF_INTC_ICR24_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR25 */ -+#define MCF_INTC_ICR25_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR26 */ -+#define MCF_INTC_ICR26_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR27 */ -+#define MCF_INTC_ICR27_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR28 */ -+#define MCF_INTC_ICR28_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR29 */ -+#define MCF_INTC_ICR29_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR30 */ -+#define MCF_INTC_ICR30_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR31 */ -+#define MCF_INTC_ICR31_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR32 */ -+#define MCF_INTC_ICR32_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR33 */ -+#define MCF_INTC_ICR33_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR34 */ -+#define MCF_INTC_ICR34_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR35 */ -+#define MCF_INTC_ICR35_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR36 */ -+#define MCF_INTC_ICR36_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR37 */ -+#define MCF_INTC_ICR37_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR38 */ -+#define MCF_INTC_ICR38_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR39 */ -+#define MCF_INTC_ICR39_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR40 */ -+#define MCF_INTC_ICR40_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR41 */ -+#define MCF_INTC_ICR41_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR42 */ -+#define MCF_INTC_ICR42_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR43 */ -+#define MCF_INTC_ICR43_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR44 */ -+#define MCF_INTC_ICR44_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR45 */ -+#define MCF_INTC_ICR45_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR46 */ -+#define MCF_INTC_ICR46_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR47 */ -+#define MCF_INTC_ICR47_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR48 */ -+#define MCF_INTC_ICR48_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR49 */ -+#define MCF_INTC_ICR49_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR50 */ -+#define MCF_INTC_ICR50_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR51 */ -+#define MCF_INTC_ICR51_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR52 */ -+#define MCF_INTC_ICR52_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR53 */ -+#define MCF_INTC_ICR53_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR54 */ -+#define MCF_INTC_ICR54_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR55 */ -+#define MCF_INTC_ICR55_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR56 */ -+#define MCF_INTC_ICR56_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR57 */ -+#define MCF_INTC_ICR57_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR58 */ -+#define MCF_INTC_ICR58_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR59 */ -+#define MCF_INTC_ICR59_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR60 */ -+#define MCF_INTC_ICR60_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR61 */ -+#define MCF_INTC_ICR61_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR62 */ -+#define MCF_INTC_ICR62_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for ICR63 */ -+#define MCF_INTC_ICR63_IL(x) (((x)&0x07)) -+ -+/* Bit definitions and macros for SWIACK */ -+#define MCF_INTC_SWIACK_VECTOR(x) (x) -+ -+/* Bit definitions and macros for LIACK group */ -+#define MCF_INTC_LIACK_VECTOR(x) (x) -+ -+/* Bit definitions and macros for L1IACK */ -+#define MCF_INTC_L1IACK_VECTOR(x) (x) -+ -+/* Bit definitions and macros for L2IACK */ -+#define MCF_INTC_L2IACK_VECTOR(x) (x) -+ -+/* Bit definitions and macros for L3IACK */ -+#define MCF_INTC_L3IACK_VECTOR(x) (x) -+ -+/* Bit definitions and macros for L4IACK */ -+#define MCF_INTC_L4IACK_VECTOR(x) (x) -+ -+/* Bit definitions and macros for L5IACK */ -+#define MCF_INTC_L5IACK_VECTOR(x) (x) -+ -+/* Bit definitions and macros for L6IACK */ -+#define MCF_INTC_L6IACK_VECTOR(x) (x) -+ -+/* Bit definitions and macros for L7IACK */ -+#define MCF_INTC_L7IACK_VECTOR(x) (x) -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_INTC_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_pciarb.h -@@ -0,0 +1,40 @@ -+/* -+ * Kurt Mahan kmahan@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_PCIARB_H__ -+#define __MCF5445X_PCIARB_H__ -+ -+/********************************************************************* -+* -+* PCI Arbiter Module (PCIARB) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_PCIARB_PACR MCF_REG32(0xFC0AC000) -+#define MCF_PCIARB_PASR MCF_REG32(0xFC0AC004) -+ -+/* Bit definitions and macros for PACR */ -+#define MCF_PCIARB_PACR_INTMPRI (0x00000001) -+#define MCF_PCIARB_PACR_EXTMPRI(x) (((x)&0x0000001F)<<1) -+#define MCF_PCIARB_PACR_RA (0x00008000) -+#define MCF_PCIARB_PACR_INTMINTEN (0x00010000) -+#define MCF_PCIARB_PACR_EXTMINTEN(x) (((x)&0x0000001F)<<17) -+#define MCF_PCIARB_PACR_PKMD (0x40000000) -+#define MCF_PCIARB_PACR_DS (0x80000000) -+ -+/* Bit definitions and macros for PASR */ -+#define MCF_PCIARB_PASR_ITLMBK (0x00010000) -+#define MCF_PCIARB_PASR_EXTMBK(x) (((x)&0x0000001F)<<17) -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_PCIARB_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_pci.h -@@ -0,0 +1,238 @@ -+/* -+ * Kurt Mahan kmahan@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_PCI_H__ -+#define __MCF5445X_PCI_H__ -+ -+/********************************************************************* -+* -+* PCI Bus Controller (PCI) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_PCI_PCIIDR MCF_REG32(0xFC0A8000) -+#define MCF_PCI_PCISCR MCF_REG32(0xFC0A8004) -+#define MCF_PCI_PCICCRIR MCF_REG32(0xFC0A8008) -+#define MCF_PCI_PCICR1 MCF_REG32(0xFC0A800C) -+#define MCF_PCI_PCIBAR0 MCF_REG32(0xFC0A8010) -+#define MCF_PCI_PCIBAR1 MCF_REG32(0xFC0A8014) -+#define MCF_PCI_PCIBAR2 MCF_REG32(0xFC0A8018) -+#define MCF_PCI_PCIBAR3 MCF_REG32(0xFC0A801C) -+#define MCF_PCI_PCIBAR4 MCF_REG32(0xFC0A8020) -+#define MCF_PCI_PCIBAR5 MCF_REG32(0xFC0A8024) -+#define MCF_PCI_PCISID MCF_REG32(0xFC0A802C) -+#define MCF_PCI_PCICR2 MCF_REG32(0xFC0A803C) -+#define MCF_PCI_PCIGSCR MCF_REG32(0xFC0A8060) -+#define MCF_PCI_PCITBATR0A MCF_REG32(0xFC0A8064) -+#define MCF_PCI_PCITBATR1A MCF_REG32(0xFC0A8068) -+#define MCF_PCI_PCITCR MCF_REG32(0xFC0A806C) -+#define MCF_PCI_PCIIW0BTAR MCF_REG32(0xFC0A8070) -+#define MCF_PCI_PCIIW1BTAR MCF_REG32(0xFC0A8074) -+#define MCF_PCI_PCIIW2BTAR MCF_REG32(0xFC0A8078) -+#define MCF_PCI_PCIIWCR MCF_REG32(0xFC0A8080) -+#define MCF_PCI_PCIICR MCF_REG32(0xFC0A8084) -+#define MCF_PCI_PCIISR MCF_REG32(0xFC0A8088) -+#define MCF_PCI_PCITCR2 MCF_REG32(0xFC0A808C) -+#define MCF_PCI_PCITBATR0 MCF_REG32(0xFC0A8090) -+#define MCF_PCI_PCITBATR1 MCF_REG32(0xFC0A8094) -+#define MCF_PCI_PCITBATR2 MCF_REG32(0xFC0A8098) -+#define MCF_PCI_PCITBATR3 MCF_REG32(0xFC0A809C) -+#define MCF_PCI_PCITBATR4 MCF_REG32(0xFC0A80A0) -+#define MCF_PCI_PCITBATR5 MCF_REG32(0xFC0A80A4) -+#define MCF_PCI_PCICAR MCF_REG32(0xFC0A80F8) -+ -+/* Parameterized register read/write macros for multiple registers */ -+#define MCF_PCI_PCIIWBTAR(x) MCF_REG32(0xFC0A8070+((x)*0x004)) -+ -+/* Bit definitions and macros for PCIIDR */ -+#define MCF_PCI_PCIIDR_VENDORID(x) (((x)&0x0000FFFF)) -+#define MCF_PCI_PCIIDR_DEVICEID(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for PCISCR */ -+#define MCF_PCI_PCISCR_M (0x00000002) -+#define MCF_PCI_PCISCR_B (0x00000004) -+#define MCF_PCI_PCISCR_SP (0x00000008) -+#define MCF_PCI_PCISCR_MW (0x00000010) -+#define MCF_PCI_PCISCR_PER (0x00000040) -+#define MCF_PCI_PCISCR_S (0x00000100) -+#define MCF_PCI_PCISCR_F (0x00000200) -+#define MCF_PCI_PCISCR_C (0x00100000) -+#define MCF_PCI_PCISCR_66M (0x00200000) -+#define MCF_PCI_PCISCR_R (0x00400000) -+#define MCF_PCI_PCISCR_FC (0x00800000) -+#define MCF_PCI_PCISCR_DP (0x01000000) -+#define MCF_PCI_PCISCR_DT(x) (((x)&0x00000003)<<25) -+#define MCF_PCI_PCISCR_TS (0x08000000) -+#define MCF_PCI_PCISCR_TR (0x10000000) -+#define MCF_PCI_PCISCR_MA (0x20000000) -+#define MCF_PCI_PCISCR_SE (0x40000000) -+#define MCF_PCI_PCISCR_PE (0x80000000) -+ -+/* Bit definitions and macros for PCICCRIR */ -+#define MCF_PCI_PCICCRIR_REVID(x) (((x)&0x000000FF)) -+#define MCF_PCI_PCICCRIR_CLASSCODE(x) (((x)&0x00FFFFFF)<<8) -+ -+/* Bit definitions and macros for PCICR1 */ -+#define MCF_PCI_PCICR1_CACHELINESIZE(x) (((x)&0x0000000F)) -+#define MCF_PCI_PCICR1_LATTIMER(x) (((x)&0x000000FF)<<8) -+#define MCF_PCI_PCICR1_HEADERTYPE(x) (((x)&0x000000FF)<<16) -+#define MCF_PCI_PCICR1_BIST(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for PCIBAR0 */ -+#define MCF_PCI_PCIBAR0_IO (0x00000001) -+#define MCF_PCI_PCIBAR0_RANGE(x) (((x)&0x00000003)<<1) -+#define MCF_PCI_PCIBAR0_PREF (0x00000008) -+#define MCF_PCI_PCIBAR0_BAR0(x) (((x)&0x00003FFF)<<18) -+ -+/* Bit definitions and macros for PCIBAR1 */ -+#define MCF_PCI_PCIBAR1_IO (0x00000001) -+#define MCF_PCI_PCIBAR1_PREF (0x00000008) -+#define MCF_PCI_PCIBAR1_BAR1(x) (((x)&0x00000FFF)<<20) -+ -+/* Bit definitions and macros for PCIBAR2 */ -+#define MCF_PCI_PCIBAR2_IO (0x00000001) -+#define MCF_PCI_PCIBAR2_RANGE(x) (((x)&0x00000003)<<1) -+#define MCF_PCI_PCIBAR2_PREF (0x00000008) -+#define MCF_PCI_PCIBAR2_BAR2(x) (((x)&0x000003FF)<<22) -+ -+/* Bit definitions and macros for PCIBAR3 */ -+#define MCF_PCI_PCIBAR3_IO (0x00000001) -+#define MCF_PCI_PCIBAR3_PREF (0x00000008) -+#define MCF_PCI_PCIBAR3_BAR3(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for PCIBAR4 */ -+#define MCF_PCI_PCIBAR4_IO (0x00000001) -+#define MCF_PCI_PCIBAR4_RANGE(x) (((x)&0x00000003)<<1) -+#define MCF_PCI_PCIBAR4_PREF (0x00000008) -+#define MCF_PCI_PCIBAR4_BAR4(x) (((x)&0x0000001F)<<27) -+ -+/* Bit definitions and macros for PCIBAR5 */ -+#define MCF_PCI_PCIBAR5_IO (0x00000001) -+#define MCF_PCI_PCIBAR5_PREF (0x00000008) -+#define MCF_PCI_PCIBAR5_BAR5(x) (((x)&0x0000000F)<<28) -+ -+/* Bit definitions and macros for PCISID */ -+#define MCF_PCI_PCISID_VENDORID(x) (((x)&0x0000FFFF)) -+#define MCF_PCI_PCISID_ID(x) (((x)&0x0000FFFF)<<16) -+ -+/* Bit definitions and macros for PCICR2 */ -+#define MCF_PCI_PCICR2_INTLINE(x) (((x)&0x000000FF)) -+#define MCF_PCI_PCICR2_INTPIN(x) (((x)&0x000000FF)<<8) -+#define MCF_PCI_PCICR2_MINGNT(x) (((x)&0x000000FF)<<16) -+#define MCF_PCI_PCICR2_MAXLAT(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for PCIGSCR */ -+#define MCF_PCI_PCIGSCR_PR (0x00000001) -+#define MCF_PCI_PCIGSCR_SEE (0x00001000) -+#define MCF_PCI_PCIGSCR_PEE (0x00002000) -+#define MCF_PCI_PCIGSCR_SE (0x10000000) -+#define MCF_PCI_PCIGSCR_PE (0x20000000) -+ -+/* Bit definitions and macros for PCITBATR0A */ -+#define MCF_PCI_PCITBATR0A_EN (0x00000001) -+#define MCF_PCI_PCITBATR0A_BAT0(x) (((x)&0x00003FFF)<<18) -+ -+/* Bit definitions and macros for PCITBATR1A */ -+#define MCF_PCI_PCITBATR1A_EN (0x00000001) -+#define MCF_PCI_PCITBATR1A_BAT1(x) (((x)&0x00000FFF)<<20) -+ -+/* Bit definitions and macros for PCITCR */ -+#define MCF_PCI_PCITCR_WCT(x) (((x)&0x000000FF)) -+#define MCF_PCI_PCITCR_WCD (0x00000100) -+#define MCF_PCI_PCITCR_P (0x00010000) -+#define MCF_PCI_PCITCR_PID (0x00020000) -+#define MCF_PCI_PCITCR_LD (0x01000000) -+ -+/* Bit definitions and macros for PCIIWBTAR group */ -+#define MCF_PCI_PCIIWBTAR_WBA(x) ((((x)&0xFF000000))) -+#define MCF_PCI_PCIIWBTAR_WAM(x) ((((x)&0xFF000000) -+#define MCF_PCI_PCIIWBTAR_WTA(x) ((((x)&0xFF000000) -+ -+/* Bit definitions and macros for PCIIW0BTAR */ -+#define MCF_PCI_PCIIW0BTAR_WBA(x) ((((x)&0xFF000000))) -+#define MCF_PCI_PCIIW0BTAR_WAM(x) ((((x)&0xFF000000) -+#define MCF_PCI_PCIIW0BTAR_WTA(x) ((((x)&0xFF000000) -+ -+/* Bit definitions and macros for PCIIWCR */ -+#define MCF_PCI_PCIIWCR_WINCTRL2(x) (((x)&0x0000000F)<<8) -+#define MCF_PCI_PCIIWCR_WINCTRL1(x) (((x)&0x0000000F)<<16) -+#define MCF_PCI_PCIIWCR_WINCTRL0(x) (((x)&0x0000000F)<<24) -+#define MCF_PCI_PCIIWCR_WINCTRL0_ENABLE (0x01000000) -+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMREAD (0x01000000) -+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDLINE (0x03000000) -+#define MCF_PCI_PCIIWCR_WINCTRL0_MEMRDMUL (0x05000000) -+#define MCF_PCI_PCIIWCR_WINCTRL0_IO (0x09000000) -+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMREAD (0x00010000) -+#define MCF_PCI_PCIIWCR_WINCTRL1_ENABLE (0x00010000) -+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDLINE (0x00030000) -+#define MCF_PCI_PCIIWCR_WINCTRL1_MEMRDMUL (0x00050000) -+#define MCF_PCI_PCIIWCR_WINCTRL1_IO (0x00090000) -+#define MCF_PCI_PCIIWCR_WINCTRL2_ENABLE (0x00000100) -+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMREAD (0x00000100) -+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDLINE (0x00000300) -+#define MCF_PCI_PCIIWCR_WINCTRL2_MEMRDMUL (0x00000500) -+#define MCF_PCI_PCIIWCR_WINCTRL2_IO (0x00000900) -+ -+/* Bit definitions and macros for PCIICR */ -+#define MCF_PCI_PCIICR_MAXRETRY(x) (((x)&0x000000FF)) -+#define MCF_PCI_PCIICR_TAE (0x01000000) -+#define MCF_PCI_PCIICR_IAE (0x02000000) -+#define MCF_PCI_PCIICR_REE (0x04000000) -+ -+/* Bit definitions and macros for PCIISR */ -+#define MCF_PCI_PCIISR_TA (0x01000000) -+#define MCF_PCI_PCIISR_IA (0x02000000) -+#define MCF_PCI_PCIISR_RE (0x04000000) -+ -+/* Bit definitions and macros for PCITCR2 */ -+#define MCF_PCI_PCITCR2_CR (0x00000001) -+#define MCF_PCI_PCITCR2_B0E (0x00000100) -+#define MCF_PCI_PCITCR2_B1E (0x00000200) -+#define MCF_PCI_PCITCR2_B2E (0x00000400) -+#define MCF_PCI_PCITCR2_B3E (0x00000800) -+#define MCF_PCI_PCITCR2_B4E (0x00001000) -+#define MCF_PCI_PCITCR2_B5E (0x00002000) -+ -+/* Bit definitions and macros for PCITBATR0 */ -+#define MCF_PCI_PCITBATR0_EN (0x00000001) -+#define MCF_PCI_PCITBATR0_BAT0(x) (((x)&0x00003FFF)<<18) -+ -+/* Bit definitions and macros for PCITBATR1 */ -+#define MCF_PCI_PCITBATR1_EN (0x00000001) -+#define MCF_PCI_PCITBATR1_BAT1(x) (((x)&0x00000FFF)<<20) -+ -+/* Bit definitions and macros for PCITBATR2 */ -+#define MCF_PCI_PCITBATR2_EN (0x00000001) -+#define MCF_PCI_PCITBATR2_BAT2(x) (((x)&0x000003FF)<<22) -+ -+/* Bit definitions and macros for PCITBATR3 */ -+#define MCF_PCI_PCITBATR3_EN (0x00000001) -+#define MCF_PCI_PCITBATR3_BAT3(x) (((x)&0x000000FF)<<24) -+ -+/* Bit definitions and macros for PCITBATR4 */ -+#define MCF_PCI_PCITBATR4_EN (0x00000001) -+#define MCF_PCI_PCITBATR4_BAT4(x) (((x)&0x0000001F)<<27) -+ -+/* Bit definitions and macros for PCITBATR5 */ -+#define MCF_PCI_PCITBATR5_EN (0x00000001) -+#define MCF_PCI_PCITBATR5_BAT5(x) (((x)&0x0000000F)<<28) -+ -+/* Bit definitions and macros for PCICAR */ -+#define MCF_PCI_PCICAR_DWORD(x) ((x)&0x000000FC) -+#define MCF_PCI_PCICAR_FUNCNUM(x) (((x)&0x00000007)<<8) -+#define MCF_PCI_PCICAR_DEVNUM(x) (((x)&0x0000001F)<<11) -+#define MCF_PCI_PCICAR_BUSNUM(x) (((x)&0x000000FF)<<16) -+#define MCF_PCI_PCICAR_E (0x80000000) -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_PCI_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_sdramc.h -@@ -0,0 +1,115 @@ -+/* -+ * Matt Waddel Matt.Waddel@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_SDRAMC_H__ -+#define __MCF5445X_SDRAMC_H__ -+ -+/********************************************************************* -+* -+* SDRAM Controller (SDRAMC) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_SDRAMC_SDMR (*(vuint32 *)(0xFC0B8000)) /* SDRAM Mode/Extended Mode Register */ -+#define MCF_SDRAMC_SDCR (*(vuint32 *)(0xFC0B8004)) /* SDRAM Control Register */ -+#define MCF_SDRAMC_SDCFG1 (*(vuint32 *)(0xFC0B8008)) /* SDRAM Configuration Register 1 */ -+#define MCF_SDRAMC_SDCFG2 (*(vuint32 *)(0xFC0B800C)) /* SDRAM Configuration Register 2 */ -+#define MCF_SDRAMC_SDCS0 (*(vuint32 *)(0xFC0B8110)) /* SDRAM Chip Select Register */ -+#define MCF_SDRAMC_SDCS1 (*(vuint32 *)(0xFC0B8114)) /* SDRAM Chip Select Register */ -+ -+/* Parameterized register read/write macros for multiple registers */ -+#define MCF_SDRAMC_SDCS(x) (*(vuint32 *)(0xFC0B8110+((x)*0x004))) /* SDRAM Chip Select Register */ -+ -+/* Bit definitions and macros for SDMR */ -+#define MCF_SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */ -+#define MCF_SDRAMC_SDMR_CMD (0x00010000) /* Command */ -+#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */ -+#define MCF_SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */ -+#define MCF_SDRAMC_SDMR_BK_LMR (0x00000000) -+#define MCF_SDRAMC_SDMR_BK_LEMR (0x40000000) -+ -+/* Bit definitions and macros for SDCR */ -+#define MCF_SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */ -+#define MCF_SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */ -+#define MCF_SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */ -+#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */ -+#define MCF_SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */ -+#define MCF_SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */ -+#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */ -+#define MCF_SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */ -+#define MCF_SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */ -+#define MCF_SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */ -+#define MCF_SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */ -+#define MCF_SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */ -+#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */ -+#define MCF_SDRAMC_SDCR_DQS_OE_BOTH (0x00000C00) -+ -+/* Bit definitions and macros for SDCFG1 */ -+#define MCF_SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */ -+#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */ -+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */ -+#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */ -+#define MCF_SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */ -+#define MCF_SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */ -+#define MCF_SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */ -+ -+/* Bit definitions and macros for SDCFG2 */ -+#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */ -+#define MCF_SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */ -+#define MCF_SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */ -+#define MCF_SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */ -+ -+/* Bit definitions and macros for SDCS group */ -+#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ -+#define MCF_SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ -+#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) -+#define MCF_SDRAMC_SDCS_CSSZ_DISABLE (0x00000000) -+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) -+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) -+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) -+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) -+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) -+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) -+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) -+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) -+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) -+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) -+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) -+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) -+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) -+ -+/* Bit definitions and macros for SDCS0 */ -+#define MCF_SDRAMC_SDCS0_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ -+#define MCF_SDRAMC_SDCS0_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ -+#define MCF_SDRAMC_SDCS0_BA(x) ((x)&0xFFF00000) -+#define MCF_SDRAMC_SDCS0_CSSZ_DISABLE (0x00000000) -+#define MCF_SDRAMC_SDCS0_CSSZ_1MBYTE (0x00000013) -+#define MCF_SDRAMC_SDCS0_CSSZ_2MBYTE (0x00000014) -+#define MCF_SDRAMC_SDCS0_CSSZ_4MBYTE (0x00000015) -+#define MCF_SDRAMC_SDCS0_CSSZ_8MBYTE (0x00000016) -+#define MCF_SDRAMC_SDCS0_CSSZ_16MBYTE (0x00000017) -+#define MCF_SDRAMC_SDCS0_CSSZ_32MBYTE (0x00000018) -+#define MCF_SDRAMC_SDCS0_CSSZ_64MBYTE (0x00000019) -+#define MCF_SDRAMC_SDCS0_CSSZ_128MBYTE (0x0000001A) -+#define MCF_SDRAMC_SDCS0_CSSZ_256MBYTE (0x0000001B) -+#define MCF_SDRAMC_SDCS0_CSSZ_512MBYTE (0x0000001C) -+#define MCF_SDRAMC_SDCS0_CSSZ_1GBYTE (0x0000001D) -+#define MCF_SDRAMC_SDCS0_CSSZ_2GBYTE (0x0000001E) -+#define MCF_SDRAMC_SDCS0_CSSZ_4GBYTE (0x0000001F) -+ -+/* Bit definitions and macros for SDCS1 */ -+#define MCF_SDRAMC_SDCS1_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ -+#define MCF_SDRAMC_SDCS1_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_SDRAMC_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_ssi.h -@@ -0,0 +1,187 @@ -+/* -+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_SSI_H__ -+#define __MCF5445X_SSI_H__ -+ -+/********************************************************************* -+* -+* Synchronous Serial Interface (SSI) -+* -+*********************************************************************/ -+ -+/* Register read/write macros */ -+#define MCF_SSI_TX0 MCF_REG32(0xFC0BC000) -+#define MCF_SSI_TX1 MCF_REG32(0xFC0BC004) -+#define MCF_SSI_RX0 MCF_REG32(0xFC0BC008) -+#define MCF_SSI_RX1 MCF_REG32(0xFC0BC00C) -+#define MCF_SSI_CR MCF_REG32(0xFC0BC010) -+#define MCF_SSI_ISR MCF_REG32(0xFC0BC014) -+#define MCF_SSI_IER MCF_REG32(0xFC0BC018) -+#define MCF_SSI_TCR MCF_REG32(0xFC0BC01C) -+#define MCF_SSI_RCR MCF_REG32(0xFC0BC020) -+#define MCF_SSI_CCR MCF_REG32(0xFC0BC024) -+#define MCF_SSI_FCSR MCF_REG32(0xFC0BC02C) -+#define MCF_SSI_ACR MCF_REG32(0xFC0BC038) -+#define MCF_SSI_ACADD MCF_REG32(0xFC0BC03C) -+#define MCF_SSI_ACDAT MCF_REG32(0xFC0BC040) -+#define MCF_SSI_ATAG MCF_REG32(0xFC0BC044) -+#define MCF_SSI_TMASK MCF_REG32(0xFC0BC048) -+#define MCF_SSI_RMASK MCF_REG32(0xFC0BC04C) -+ -+/* Parameterized register read/write macros for multiple registers */ -+#define MCF_SSI_TX(x) MCF_REG32(0xFC0BC000+((x)*0x004)) -+#define MCF_SSI_RX(x) MCF_REG32(0xFC0BC008+((x)*0x004)) -+ -+/* Bit definitions and macros for TX group */ -+#define MCF_SSI_TX_SSI_TX(x) (x) -+ -+/* Bit definitions and macros for TX0 */ -+#define MCF_SSI_TX0_SSI_TX(x) (x) -+ -+/* Bit definitions and macros for TX1 */ -+#define MCF_SSI_TX1_SSI_TX(x) (x) -+ -+/* Bit definitions and macros for RX group */ -+#define MCF_SSI_RX_SSI_RX(x) (x) -+ -+/* Bit definitions and macros for RX0 */ -+#define MCF_SSI_RX0_SSI_RX(x) (x) -+ -+/* Bit definitions and macros for RX1 */ -+#define MCF_SSI_RX1_SSI_RX(x) (x) -+ -+/* Bit definitions and macros for CR */ -+#define MCF_SSI_CR_SSI_EN (0x00000001) -+#define MCF_SSI_CR_TE (0x00000002) -+#define MCF_SSI_CR_RE (0x00000004) -+#define MCF_SSI_CR_NET (0x00000008) -+#define MCF_SSI_CR_SYN (0x00000010) -+#define MCF_SSI_CR_I2S(x) (((x)&0x00000003)<<5) -+#define MCF_SSI_CR_MCE (0x00000080) -+#define MCF_SSI_CR_TCH (0x00000100) -+#define MCF_SSI_CR_CIS (0x00000200) -+#define MCF_SSI_CR_I2S_NORMAL (0x00000000) -+#define MCF_SSI_CR_I2S_MASTER (0x00000020) -+#define MCF_SSI_CR_I2S_SLAVE (0x00000040) -+ -+/* Bit definitions and macros for ISR */ -+#define MCF_SSI_ISR_TFE0 (0x00000001) -+#define MCF_SSI_ISR_TFE1 (0x00000002) -+#define MCF_SSI_ISR_RFF0 (0x00000004) -+#define MCF_SSI_ISR_RFF1 (0x00000008) -+#define MCF_SSI_ISR_RLS (0x00000010) -+#define MCF_SSI_ISR_TLS (0x00000020) -+#define MCF_SSI_ISR_RFS (0x00000040) -+#define MCF_SSI_ISR_TFS (0x00000080) -+#define MCF_SSI_ISR_TUE0 (0x00000100) -+#define MCF_SSI_ISR_TUE1 (0x00000200) -+#define MCF_SSI_ISR_ROE0 (0x00000400) -+#define MCF_SSI_ISR_ROE1 (0x00000800) -+#define MCF_SSI_ISR_TDE0 (0x00001000) -+#define MCF_SSI_ISR_TDE1 (0x00002000) -+#define MCF_SSI_ISR_RDR0 (0x00004000) -+#define MCF_SSI_ISR_RDR1 (0x00008000) -+#define MCF_SSI_ISR_RXT (0x00010000) -+#define MCF_SSI_ISR_CMDDU (0x00020000) -+#define MCF_SSI_ISR_CMDAU (0x00040000) -+ -+/* Bit definitions and macros for IER */ -+#define MCF_SSI_IER_TFE0 (0x00000001) -+#define MCF_SSI_IER_TFE1 (0x00000002) -+#define MCF_SSI_IER_RFF0 (0x00000004) -+#define MCF_SSI_IER_RFF1 (0x00000008) -+#define MCF_SSI_IER_RLS (0x00000010) -+#define MCF_SSI_IER_TLS (0x00000020) -+#define MCF_SSI_IER_RFS (0x00000040) -+#define MCF_SSI_IER_TFS (0x00000080) -+#define MCF_SSI_IER_TUE0 (0x00000100) -+#define MCF_SSI_IER_TUE1 (0x00000200) -+#define MCF_SSI_IER_ROE0 (0x00000400) -+#define MCF_SSI_IER_ROE1 (0x00000800) -+#define MCF_SSI_IER_TDE0 (0x00001000) -+#define MCF_SSI_IER_TDE1 (0x00002000) -+#define MCF_SSI_IER_RDR0 (0x00004000) -+#define MCF_SSI_IER_RDR1 (0x00008000) -+#define MCF_SSI_IER_RXT (0x00010000) -+#define MCF_SSI_IER_CMDU (0x00020000) -+#define MCF_SSI_IER_CMDAU (0x00040000) -+#define MCF_SSI_IER_TIE (0x00080000) -+#define MCF_SSI_IER_TDMAE (0x00100000) -+#define MCF_SSI_IER_RIE (0x00200000) -+#define MCF_SSI_IER_RDMAE (0x00400000) -+ -+/* Bit definitions and macros for TCR */ -+#define MCF_SSI_TCR_TEFS (0x00000001) -+#define MCF_SSI_TCR_TFSL (0x00000002) -+#define MCF_SSI_TCR_TFSI (0x00000004) -+#define MCF_SSI_TCR_TSCKP (0x00000008) -+#define MCF_SSI_TCR_TSHFD (0x00000010) -+#define MCF_SSI_TCR_TXDIR (0x00000020) -+#define MCF_SSI_TCR_TFDIR (0x00000040) -+#define MCF_SSI_TCR_TFEN0 (0x00000080) -+#define MCF_SSI_TCR_TFEN1 (0x00000100) -+#define MCF_SSI_TCR_TXBIT0 (0x00000200) -+ -+/* Bit definitions and macros for RCR */ -+#define MCF_SSI_RCR_REFS (0x00000001) -+#define MCF_SSI_RCR_RFSL (0x00000002) -+#define MCF_SSI_RCR_RFSI (0x00000004) -+#define MCF_SSI_RCR_RSCKP (0x00000008) -+#define MCF_SSI_RCR_RSHFD (0x00000010) -+#define MCF_SSI_RCR_RFEN0 (0x00000080) -+#define MCF_SSI_RCR_RFEN1 (0x00000100) -+#define MCF_SSI_RCR_RXBIT0 (0x00000200) -+#define MCF_SSI_RCR_RXEXT (0x00000400) -+ -+/* Bit definitions and macros for CCR */ -+#define MCF_SSI_CCR_PM(x) (((x)&0x000000FF)) -+#define MCF_SSI_CCR_DC(x) (((x)&0x0000001F)<<8) -+#define MCF_SSI_CCR_WL(x) (((x)&0x0000000F)<<13) -+#define MCF_SSI_CCR_PSR (0x00020000) -+#define MCF_SSI_CCR_DIV2 (0x00040000) -+ -+/* Bit definitions and macros for FCSR */ -+#define MCF_SSI_FCSR_TFWM0(x) (((x)&0x0000000F)) -+#define MCF_SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) -+#define MCF_SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) -+#define MCF_SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) -+#define MCF_SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) -+#define MCF_SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) -+#define MCF_SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) -+#define MCF_SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) -+ -+/* Bit definitions and macros for ACR */ -+#define MCF_SSI_ACR_AC97EN (0x00000001) -+#define MCF_SSI_ACR_FV (0x00000002) -+#define MCF_SSI_ACR_TIF (0x00000004) -+#define MCF_SSI_ACR_RD (0x00000008) -+#define MCF_SSI_ACR_WR (0x00000010) -+#define MCF_SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) -+ -+/* Bit definitions and macros for ACADD */ -+#define MCF_SSI_ACADD_SSI_ACADD(x) (((x)&0x0007FFFF)) -+ -+/* Bit definitions and macros for ACDAT */ -+#define MCF_SSI_ACDAT_SSI_ACDAT(x) (((x)&0x0007FFFF)) -+ -+/* Bit definitions and macros for ATAG */ -+#define MCF_SSI_ATAG_DDI_ATAG(x) (((x)&0x0000FFFF)) -+ -+/* Bit definitions and macros for TMASK */ -+#define MCF_SSI_TMASK_SSI_TMASK(x) (x) -+ -+/* Bit definitions and macros for RMASK */ -+#define MCF_SSI_RMASK_SSI_RMASK(x) (x) -+ -+/********************************************************************/ -+ -+#endif /* __MCF5445X_SSI_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_usb.h -@@ -0,0 +1,50 @@ -+/* -+ * Duck Schmid duck@freescale.com -+ * -+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+#include <asm/mcfsim.h> -+ -+/* ehci_arc_hc_driver.flags value */ -+#define FSL_PLATFORM_HC_FLAGS (HCD_USB2 | HCD_MEMORY) -+ -+static inline int fsl_platform_verify(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+static inline void fsl_platform_usb_setup(struct usb_hcd *hcd) -+{ -+} -+ -+static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd) -+{ -+ unsigned int temp; -+ struct fsl_usb2_platform_data *pdata; -+ struct fsl_usb_host_regs *regs; -+ -+ pdata = hcd->self.controller->platform_data; -+ regs = pdata->regs; -+ -+ if (pdata->xcvr_ops && pdata->xcvr_ops->set_host) -+ pdata->xcvr_ops->set_host(); -+ -+ /* set host mode and select "big endian" */ -+ temp = fsl_readl(®s->usbmode); -+ temp |= USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); -+ fsl_writel(temp, ®s->usbmode); -+ -+ pr_debug("%s: set usbmode to 0x%x\n\n", __FUNCTION__, -+ fsl_readl(®s->usbmode)); -+ -+} ---- /dev/null -+++ b/include/asm-m68k/mcf5445x_xbs.h -@@ -0,0 +1,81 @@ -+/* -+ * Kurt Mahan kmahan@freescale.com -+ * -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#ifndef __MCF5445X_XBS_H__ -+#define __MCF5445X_XBS_H__ -+ -+/* -+ * Crossbar Switch (XBS) -+ */ -+ -+/* Register read/write macros */ -+#define MCF_XBS_PRS1 MCF_REG32(0xFC004100) /* Flexbus Priority */ -+#define MCF_XBS_CRS1 MCF_REG32(0xFC004110) /* Flexbus Control */ -+#define MCF_XBS_PRS2 MCF_REG32(0xFC004200) /* SDRam Priority */ -+#define MCF_XBS_CRS2 MCF_REG32(0xFC004210) /* SDRam Control */ -+#define MCF_XBS_PRS3 MCF_REG32(0xFC004300) /* ATA Priority */ -+#define MCF_XBS_CRS3 MCF_REG32(0xFC004310) /* ATA Control */ -+#define MCF_XBS_PRS4 MCF_REG32(0xFC004400) /* SRAM Priority */ -+#define MCF_XBS_CRS4 MCF_REG32(0xFC004410) /* SRAM Control */ -+#define MCF_XBS_PRS5 MCF_REG32(0xFC004500) /* PCI Priority */ -+#define MCF_XBS_CRS5 MCF_REG32(0xFC004510) /* PCI Control */ -+#define MCF_XBS_PRS6 MCF_REG32(0xFC004600) /* Slave6 Priority */ -+#define MCF_XBS_CRS6 MCF_REG32(0xFC004610) /* Slave6 Control */ -+#define MCF_XBS_PRS7 MCF_REG32(0xFC004700) /* Other Priority */ -+#define MCF_XBS_CRS7 MCF_REG32(0xFC004710) /* Other Control */ -+ -+/* Priorities */ -+#define MCF_XBS_PRI_1 0 /* Level 1 (highest) */ -+#define MCF_XBS_PRI_2 1 /* Level 2 */ -+#define MCF_XBS_PRI_3 2 /* Level 3 */ -+#define MCF_XBS_PRI_4 3 /* Level 4 */ -+#define MCF_XBS_PRI_5 4 /* Level 5 */ -+#define MCF_XBS_PRI_6 5 /* Level 6 */ -+#define MCF_XBS_PRI_7 6 /* Level 7 (lowest) */ -+#define MCF_XBS_PRI_MASK 7 /* Mask (Not a valid level) */ -+ -+/* Priority Register (PRSn) Defs */ -+#define MCF_XBS_PRS_MACRO(m,p) ((p)<<((m)<<2)) -+#define MCF_XBS_PRS_M0(p) MCF_XBS_PRS_MACRO(0, p) /* Coldfire Core */ -+#define MCF_XBS_PRS_M1(p) MCF_XBS_PRS_MACRO(1, p) /* eDMA */ -+#define MCF_XBS_PRS_M2(p) MCF_XBS_PRS_MACRO(2, p) /* FEC0 */ -+#define MCF_XBS_PRS_M3(p) MCF_XBS_PRS_MACRO(3, p) /* FEC1 */ -+#define MCF_XBS_PRS_M4(p) MCF_XBS_PRS_MACRO(4, p) /* Master 4 */ -+#define MCF_XBS_PRS_M5(p) MCF_XBS_PRS_MACRO(5, p) /* PCI */ -+#define MCF_XBS_PRS_M6(p) MCF_XBS_PRS_MACRO(6, p) /* USB OTG */ -+#define MCF_XBS_PRS_M7(p) MCF_XBS_PRS_MACRO(7, p) /* Serial Boot */ -+ -+/* Control Register (CRSn) Defs */ -+#define MCF_XBS_CRS_RO 0x80000000 /* Read Only */ -+#define MCF_XBS_CRS_ARB 0x00000100 /* Arbitration Mode */ -+#define MCF_XBS_CRS_PCTL 0x00000030 /* Parking Control */ -+#define MCF_XBS_CRS_PARK 0x00000007 /* Park Location */ -+ -+/* MCF_XBS_CRS_ARB Defs */ -+#define MCF_ABS_CRS_ARB_FIXED 0x00000000 /* Fixed priority */ -+#define MCF_ABS_CRS_ARB_ROUND 0x00000100 /* Round Robin priority */ -+ -+/* MCF_XBS_CRS_PCTL Defs */ -+#define MCF_ABS_CRS_PCTL_PARK 0x00000000 /* Park on the defined PARK */ -+#define MCF_ABS_CRS_PCTL_LAST 0x00000010 /* Park on the last master */ -+#define MCF_ABS_CRS_PCTL_NONE 0x00000020 /* Don't park */ -+ -+/* MCF_XBS_CRS_PARK Defs */ -+#define MCF_ABS_CRS_PARK_M0 0x00000000 /* Park on Coldfire Core */ -+#define MCF_ABS_CRS_PARK_M1 0x00000001 /* Park on eDMA */ -+#define MCF_ABS_CRS_PARK_M2 0x00000002 /* Park on FEC0 */ -+#define MCF_ABS_CRS_PARK_M3 0x00000003 /* Park on FEC1 */ -+#define MCF_ABS_CRS_PARK_M4 0x00000004 /* Park on Reserved */ -+#define MCF_ABS_CRS_PARK_M5 0x00000005 /* Park on PCI */ -+#define MCF_ABS_CRS_PARK_M6 0x00000006 /* Park on USB OTG */ -+#define MCF_ABS_CRS_PARK_M7 0x00000007 /* Park on Serial Boot */ -+ -+#endif /* __MCF5445X_XBS_H__ */ ---- /dev/null -+++ b/include/asm-m68k/mcfdspi.h -@@ -0,0 +1,48 @@ -+/* -+ * mcfdspi.h-DSPI controller for the ColdFire processors. -+ * -+ * Andrey Butok -+ * Copyright Freescale Semiconductor, Inc. 2008 -+ * -+ * This file is based on mcfqspi.h -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ *************************************************************************** -+ * Changes: -+ * v0.001 25 March 2008 Andrey Butok -+ * Initial Release - developed on uClinux with 2.6.23 kernel. -+ * -+ */ -+ -+#ifndef MCFDSPI_H_ -+#define MCFDSPI_H_ -+ -+struct coldfire_dspi_chip { -+ u8 mode; -+ u8 bits_per_word; -+ u16 void_write_data; -+ /* Only used in master mode */ -+ u8 dbr; /* Double baud rate */ -+ u8 pbr; /* Baud rate prescaler */ -+ u8 br; /* Baud rate scaler */ -+ u8 pcssck; /* PCS to SCK delay prescaler */ -+ u8 pasc; /* After SCK delay prescaler */ -+ u8 pdt; /* Delay after transfer prescaler */ -+ u8 cssck; /* PCS to SCK delay scaler */ -+ u8 asc; /* After SCK delay scaler */ -+ u8 dt; /* Delay after transfer scaler */ -+}; -+#endif /*MCFDSPI_H_*/ ---- /dev/null -+++ b/include/asm-m68k/mcfqspi.h -@@ -0,0 +1,51 @@ -+/****************************************************************************/ -+/* -+ * mcfqspi.h - Master QSPI controller for the ColdFire processors -+ * -+ * (C) Copyright 2005, Intec Automation, -+ * Mike Lavender (mike@steroidmicros) -+ * -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -+/* ------------------------------------------------------------------------- */ -+ -+#ifndef MCFQSPI_H_ -+#define MCFQSPI_H_ -+ -+#define QSPI_CS_INIT 0x01 -+#define QSPI_CS_ASSERT 0x02 -+#define QSPI_CS_DROP 0x04 -+ -+struct coldfire_spi_master { -+ u16 bus_num; -+ u16 num_chipselect; -+ u8 irq_source; -+ u32 irq_vector; -+ u32 irq_mask; -+ u8 irq_lp; -+ u8 par_val; -+ u32 *irq_list; -+ void (*cs_control)(u8 cs, u8 command); -+}; -+ -+ -+struct coldfire_spi_chip { -+ u8 mode; -+ u8 bits_per_word; -+ u8 del_cs_to_clk; -+ u8 del_after_trans; -+ u16 void_write_data; -+}; -+#endif /*MCFQSPI_H_*/ ---- /dev/null -+++ b/include/asm-m68k/mcfsim.h -@@ -0,0 +1,102 @@ -+/* -+ * mcfsim.h -- ColdFire System Integration Module support. -+ * -+ * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) -+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com) -+ */ -+ -+#ifndef mcfsim_h -+#define mcfsim_h -+ -+#if defined(CONFIG_COLDFIRE) -+#include <asm/coldfire.h> -+#endif -+ -+#if defined(CONFIG_M5445X) -+#include <asm/mcf5445x_intc.h> -+#include <asm/mcf5445x_gpio.h> -+#include <asm/mcf5445x_i2c.h> -+#include <asm/mcf5445x_ccm.h> -+#include <asm/mcf5445x_pci.h> -+#include <asm/mcf5445x_pciarb.h> -+#include <asm/mcf5445x_eport.h> -+#include <asm/mcf5445x_fbcs.h> -+#include <asm/mcf5445x_xbs.h> -+#include <asm/mcf5445x_dtim.h> -+#elif defined(CONFIG_M547X_8X) -+#include <asm/m5485sim.h> -+#include <asm/m5485gpio.h> -+#endif -+ -+/* -+ * Define the base address of the SIM within the MBAR address space. -+ */ -+#define MCFSIM_BASE 0x0 /* Base address of SIM */ -+ -+/* -+ * Bit definitions for the ICR family of registers. -+ */ -+#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ -+#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ -+#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ -+#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ -+#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ -+#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ -+#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ -+#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ -+#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ -+ -+#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ -+#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ -+#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ -+#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ -+ -+/* -+ * Bit definitions for the Interrupt Mask register (IMR). -+ */ -+#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ -+#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ -+#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ -+#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ -+#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ -+#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ -+#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ -+ -+#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ -+#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ -+#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ -+#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ -+#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ -+#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ -+ -+/* -+ * Mask for all of the SIM devices. Some parts have more or less -+ * SIM devices. This is a catchall for the sandard set. -+ */ -+#ifndef MCFSIM_IMR_MASKALL -+#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ -+#endif -+ -+ -+/* -+ * PIT interrupt settings, if not found in mXXXXsim.h file. -+ */ -+#ifndef ICR_INTRCONF -+#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ -+#endif -+#ifndef MCFPIT_IMR -+#define MCFPIT_IMR MCFINTC_IMRH -+#endif -+#ifndef MCFPIT_IMR_IBIT -+#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) -+#endif -+ -+ -+#ifndef __ASSEMBLY__ -+/* -+ * Definition for the interrupt auto-vectoring support. -+ */ -+extern void mcf_autovector(unsigned int vec); -+#endif /* __ASSEMBLY__ */ -+ -+#endif /* mcfsim_h */ ---- /dev/null -+++ b/include/asm-m68k/mcfuart.h -@@ -0,0 +1,194 @@ -+/* -+ * mcfuart.h -- ColdFire internal UART support defines. -+ * -+ * Matt Waddel Matt.Waddel@freescale.com -+ * Copyright Freescale Semiconductor, Inc. 2007 -+ * -+ * Derived from m68knommu version of this same file (Greg Ungerer & Lineo). -+ * -+ */ -+ -+#ifndef mcfuart_h -+#define mcfuart_h -+ -+/* -+ * Define the base address of the UARTS within the MBAR address -+ * space. -+ */ -+#if defined(CONFIG_M5445X) -+#include <asm/mcf5445x_intc.h> -+#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ -+#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ -+#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ -+#define MCFINT_VECBASE 64 -+#define MCFINT_UART0 26 -+ -+#elif defined(CONFIG_M547X_8X) -+ -+#define MCFUART_BASE1 0x8600 /* Base address of UART1 */ -+#define MCFUART_BASE2 0x8700 /* Base address of UART2 */ -+#define MCFUART_BASE3 0x8800 /* Base address of UART3 */ -+#define MCFUART_BASE4 0x8900 /* Base address of UART4 */ -+#define MCFINT_VECBASE 64 -+#define MCFINT_UART0 35 -+#endif -+ -+ -+/* -+ * Define the ColdFire UART register set addresses. -+ */ -+#define MCFUART_UMR 0x00 /* Mode register (r/w) */ -+#define MCFUART_USR 0x04 /* Status register (r) */ -+#define MCFUART_UCSR 0x04 /* Clock Select (w) */ -+#define MCFUART_UCR 0x08 /* Command register (w) */ -+#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ -+#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ -+#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ -+#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ -+#define MCFUART_UISR 0x14 /* Interrup Status (r) */ -+#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ -+#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ -+#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ -+#ifdef CONFIG_M5272 -+#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ -+#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ -+#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ -+#else -+#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ -+#endif -+#define MCFUART_UIPR 0x34 /* Input Port (r) */ -+#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ -+#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ -+ -+ -+/* -+ * Define bit flags in Mode Register 1 (MR1). -+ */ -+#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ -+#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ -+#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ -+#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ -+#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ -+ -+#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ -+#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ -+#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ -+#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ -+#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ -+ -+#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ -+#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ -+#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ -+#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ -+ -+/* -+ * Define bit flags in Mode Register 2 (MR2). -+ */ -+#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ -+#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ -+#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ -+#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ -+#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ -+ -+#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ -+#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ -+#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ -+ -+/* -+ * Define bit flags in Status Register (USR). -+ */ -+#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ -+#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ -+#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ -+#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ -+#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ -+#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ -+#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ -+#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ -+ -+#if defined(CONFIG_M547X_8X) -+#define MCFUART_USR_TXREADY_BN 0x0a -+#define MCFUART_USR_TXEMPTY_BN 0x0b -+#endif -+ -+#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ -+ MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) -+ -+/* -+ * Define bit flags in Clock Select Register (UCSR). -+ */ -+#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ -+#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ -+#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ -+ -+#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ -+#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ -+#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ -+ -+/* -+ * Define bit flags in Command Register (UCR). -+ */ -+#define MCFUART_UCR_CMDNULL 0x00 /* No command */ -+#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ -+#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ -+#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ -+#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ -+#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ -+#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ -+#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ -+ -+#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ -+#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ -+#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ -+#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ -+#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ -+#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ -+ -+/* -+ * Define bit flags in Input Port Change Register (UIPCR). -+ */ -+#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ -+#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ -+ -+/* -+ * Define bit flags in Input Port Register (UIP). -+ */ -+#define MCFUART_UIPR_CTS 0x01 /* CTS value */ -+ -+/* -+ * Define bit flags in Output Port Registers (UOP). -+ * Clear bit by writing to UOP0, set by writing to UOP1. -+ */ -+#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ -+ -+/* -+ * Define bit flags in the Auxiliary Control Register (UACR). -+ */ -+#define MCFUART_UACR_IEC 0x01 /* Input enable control */ -+ -+/* -+ * Define bit flags in Interrupt Status Register (UISR). -+ * These same bits are used for the Interrupt Mask Register (UIMR). -+ */ -+#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ -+#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ -+#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ -+#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ -+ -+#ifdef CONFIG_M5272 -+/* -+ * Define bit flags in the Transmitter FIFO Register (UTF). -+ */ -+#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ -+#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ -+#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ -+ -+/* -+ * Define bit flags in the Receiver FIFO Register (URF). -+ */ -+#define MCFUART_URF_RXB 0x1f /* Receiver data level */ -+#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ -+#define MCFUART_URF_RXS 0xc0 /* Receiver status */ -+#endif -+ -+#endif /* mcfuart_h */ ---- a/include/asm-m68k/mmu_context.h -+++ b/include/asm-m68k/mmu_context.h -@@ -7,7 +7,7 @@ static inline void enter_lazy_tlb(struct - { - } - --#ifndef CONFIG_SUN3 -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) - - #include <asm/setup.h> - #include <asm/page.h> -@@ -102,7 +102,7 @@ static inline void activate_mm(struct mm - switch_mm_0460(next_mm); - } - --#else /* CONFIG_SUN3 */ -+#elif defined(CONFIG_SUN3) - #include <asm/sun3mmu.h> - #include <linux/sched.h> - -@@ -150,5 +150,155 @@ static inline void activate_mm(struct mm - activate_context(next_mm); - } - --#endif -+#else /* CONFIG_COLDFIRE */ -+ -+#include <asm/coldfire.h> -+#include <asm/atomic.h> -+#include <asm/bitops.h> -+#include <asm/mmu.h> -+ -+#define NO_CONTEXT 256 -+#define LAST_CONTEXT 255 -+#define FIRST_CONTEXT 1 -+ -+extern void set_context(mm_context_t context, pgd_t *pgd); -+extern unsigned long context_map[]; -+extern mm_context_t next_mmu_context; -+ -+extern atomic_t nr_free_contexts; -+extern struct mm_struct *context_mm[LAST_CONTEXT+1]; -+extern void steal_context(void); -+ -+static inline void get_mmu_context(struct mm_struct *mm) -+{ -+ mm_context_t ctx; -+ -+ if (mm->context != NO_CONTEXT) -+ return; -+ while (atomic_dec_and_test_lt(&nr_free_contexts)) { -+ atomic_inc(&nr_free_contexts); -+ steal_context(); -+ } -+ ctx = next_mmu_context; -+ while (test_and_set_bit(ctx, context_map)) { -+ ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx); -+ if (ctx > LAST_CONTEXT) -+ ctx = 0; -+ } -+ next_mmu_context = (ctx + 1) & LAST_CONTEXT; -+ mm->context = ctx; -+ context_mm[ctx] = mm; -+} -+ -+/* -+ * Set up the context for a new address space. -+ */ -+#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0) -+ -+/* -+ * We're finished using the context for an address space. -+ */ -+static inline void destroy_context(struct mm_struct *mm) -+{ -+ if (mm->context != NO_CONTEXT) { -+ clear_bit(mm->context, context_map); -+ mm->context = NO_CONTEXT; -+ atomic_inc(&nr_free_contexts); -+ } -+} -+ -+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, -+ struct task_struct *tsk) -+{ -+ get_mmu_context(tsk->mm); -+ set_context(tsk->mm->context, next->pgd); -+} -+ -+/* -+ * After we have set current->mm to a new value, this activates -+ * the context for the new mm so we see the new mappings. -+ */ -+static inline void activate_mm(struct mm_struct *active_mm, -+ struct mm_struct *mm) -+{ -+ get_mmu_context(mm); -+ set_context(mm->context, mm->pgd); -+} -+ -+#define deactivate_mm(tsk, mm) do { } while (0) -+ -+extern void mmu_context_init(void); -+#if defined(CONFIG_M547X_8X) -+#define prepare_arch_switch(next) load_ksp_mmu(next) -+ -+static inline void load_ksp_mmu(struct task_struct *task) -+{ -+ int flags; -+ struct mm_struct *mm; -+ int asid; -+ pgd_t *pgd; -+ pmd_t *pmd; -+ pte_t *pte; -+ unsigned long mmuar; -+ -+ local_irq_save(flags); -+ mmuar = task->thread.ksp; -+ -+ /* Search for a valid TLB entry, if one is found, don't remap */ -+ *MMUAR = mmuar; -+ *MMUOR = MMUOR_STLB | MMUOR_ADR; -+ if ((*MMUSR) & MMUSR_HIT) -+ goto end; -+ -+ if (mmuar >= PAGE_OFFSET) { -+ mm = &init_mm; -+ } else { -+ printk ("load_ksp_mmu: non-kernel mm found: 0x%08x\n", (unsigned int) task->mm); -+ mm = task->mm; -+ } -+ -+ if (!mm) -+ goto bug; -+ -+ pgd = pgd_offset(mm, mmuar); -+ if (pgd_none(*pgd)) -+ goto bug; -+ -+ pmd = pmd_offset(pgd, mmuar); -+ if (pmd_none(*pmd)) -+ goto bug; -+ -+ pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar) -+ : pte_offset_map(pmd, mmuar); -+ if (pte_none(*pte) || !pte_present(*pte)) -+ goto bug; -+ -+ set_pte(pte, pte_mkyoung(*pte)); -+ asid = mm->context & 0xff; -+ if (!pte_dirty(*pte) && mmuar<=PAGE_OFFSET) -+ set_pte(pte, pte_wrprotect(*pte)); -+ -+ *MMUTR = (mmuar & PAGE_MASK) | (asid << CF_ASID_MMU_SHIFT) -+ | (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK ) >> CF_PAGE_MMUTR_SHIFT) -+ | MMUTR_V; -+ -+ *MMUDR = (pte_val(*pte) & PAGE_MASK) -+ | ((pte->pte) & CF_PAGE_MMUDR_MASK) -+ | MMUDR_SZ8K | MMUDR_X; -+ -+ *MMUOR = MMUOR_ACC | MMUOR_UAA; -+ asm ("nop"); -+ -+ goto end; -+ -+bug: -+ printk ("ksp load failed: mm=0x%08x ksp=0x%08x\n", (unsigned int) mm, (unsigned int) mmuar); -+ -+end: -+ local_irq_restore(flags); -+} -+ -+#endif /* CONFIG_M547X_8X */ -+ -+#endif /* CONFIG_COLDFIRE */ - #endif ---- a/include/asm-m68k/page.h -+++ b/include/asm-m68k/page.h -@@ -4,7 +4,7 @@ - #include <linux/const.h> - - /* PAGE_SHIFT determines the page size */ --#ifndef CONFIG_SUN3 -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) - #define PAGE_SHIFT (12) - #else - #define PAGE_SHIFT (13) -@@ -116,10 +116,31 @@ typedef struct page *pgtable_t; - - extern unsigned long m68k_memoffset; - --#ifndef CONFIG_SUN3 -+#if !defined(CONFIG_SUN3) - - #define WANT_PAGE_VIRTUAL - -+#if defined(CONFIG_COLDFIRE) -+static inline unsigned long ___pa(void *vaddr) -+{ -+#if CONFIG_SDRAM_BASE != PAGE_OFFSET -+ return (((unsigned long)vaddr & 0x0fffffff) + CONFIG_SDRAM_BASE); -+#else -+ return (unsigned long)vaddr; -+#endif -+} -+#define __pa(vaddr) ___pa((void *)(vaddr)) -+ -+static inline void *__va(unsigned long paddr) -+{ -+#if CONFIG_SDRAM_BASE != PAGE_OFFSET -+ return (void *)((paddr & 0x0fffffff) + PAGE_OFFSET); -+#else -+ return (void *)paddr; -+#endif -+} -+ -+#else - static inline unsigned long ___pa(void *vaddr) - { - unsigned long paddr; -@@ -141,6 +162,7 @@ static inline void *__va(unsigned long p - : "0" (paddr), "i" (m68k_fixup_memoffset)); - return vaddr; - } -+#endif - - #else /* !CONFIG_SUN3 */ - /* This #define is a horrible hack to suppress lots of warnings. --m */ -@@ -172,6 +194,8 @@ static inline void *__va(unsigned long x - * memory node, but we have no highmem, so that works for now. - * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots - * of the shifts unnecessary. -+ * -+ * PFNs are used to map physical pages. So PFN[0] maps to the base phys addr. - */ - #define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) - #define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) -@@ -228,4 +252,9 @@ static inline __attribute_const__ int __ - - #include <asm-generic/page.h> - -+#ifdef CONFIG_VSYSCALL -+/* vDSO support */ -+#define __HAVE_ARCH_GATE_AREA -+#endif -+ - #endif /* _M68K_PAGE_H */ ---- a/include/asm-m68k/page_offset.h -+++ b/include/asm-m68k/page_offset.h -@@ -1,8 +1,15 @@ -+/* -+ * Page and physical memory maps. -+ */ -+#if defined(CONFIG_SUN3) -+#define PAGE_OFFSET_RAW 0x0E000000 -+ -+#elif defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X) -+#define PHYS_OFFSET CONFIG_SDRAM_BASE -+#define PAGE_OFFSET_RAW (PHYS_OFFSET) -+/* #define PAGE_OFFSET_RAW 0xC0000000 */ - --/* This handles the memory map.. */ --#ifndef CONFIG_SUN3 --#define PAGE_OFFSET_RAW 0x00000000 - #else --#define PAGE_OFFSET_RAW 0x0E000000 -+/* default */ -+#define PAGE_OFFSET_RAW 0x00000000 - #endif -- ---- a/include/asm-m68k/pci.h -+++ b/include/asm-m68k/pci.h -@@ -1,57 +1,10 @@ --#ifndef _ASM_M68K_PCI_H --#define _ASM_M68K_PCI_H -+#ifndef M68K_PCI_H -+#define M68K_PCI_H - --/* -- * asm-m68k/pci_m68k.h - m68k specific PCI declarations. -- * -- * Written by Wout Klaren. -- */ -+#ifdef CONFIG_M5445X -+#include "5445x_pci.h" -+#else -+#include "548x_pci.h" -+#endif - --#include <asm/scatterlist.h> -- --struct pci_ops; -- --/* -- * Structure with hardware dependent information and functions of the -- * PCI bus. -- */ -- --struct pci_bus_info --{ -- /* -- * Resources of the PCI bus. -- */ -- -- struct resource mem_space; -- struct resource io_space; -- -- /* -- * System dependent functions. -- */ -- -- struct pci_ops *m68k_pci_ops; -- -- void (*fixup)(int pci_modify); -- void (*conf_device)(struct pci_dev *dev); --}; -- --#define pcibios_assign_all_busses() 0 --#define pcibios_scan_all_fns(a, b) 0 -- --static inline void pcibios_set_master(struct pci_dev *dev) --{ -- /* No special bus mastering setup handling */ --} -- --static inline void pcibios_penalize_isa_irq(int irq, int active) --{ -- /* We don't do dynamic PCI IRQ allocation */ --} -- --/* The PCI address space does equal the physical memory -- * address space. The networking and block device layers use -- * this boolean for bounce buffer decisions. -- */ --#define PCI_DMA_BUS_IS_PHYS (1) -- --#endif /* _ASM_M68K_PCI_H */ -+#endif /* M68K_PCI_H */ ---- a/include/asm-m68k/pgalloc.h -+++ b/include/asm-m68k/pgalloc.h -@@ -8,8 +8,10 @@ - #include <asm/virtconvert.h> - - --#ifdef CONFIG_SUN3 -+#if defined(CONFIG_SUN3) - #include <asm/sun3_pgalloc.h> -+#elif defined(CONFIG_COLDFIRE) -+#include <asm/cf_pgalloc.h> - #else - #include <asm/motorola_pgalloc.h> - #endif ---- a/include/asm-m68k/pgtable.h -+++ b/include/asm-m68k/pgtable.h -@@ -40,6 +40,8 @@ - /* PGDIR_SHIFT determines what a third-level page table entry can map */ - #ifdef CONFIG_SUN3 - #define PGDIR_SHIFT 17 -+#elif defined(CONFIG_COLDFIRE) -+#define PGDIR_SHIFT 22 - #else - #define PGDIR_SHIFT 25 - #endif -@@ -54,6 +56,10 @@ - #define PTRS_PER_PTE 16 - #define PTRS_PER_PMD 1 - #define PTRS_PER_PGD 2048 -+#elif defined(CONFIG_COLDFIRE) -+#define PTRS_PER_PTE 512 -+#define PTRS_PER_PMD 1 -+#define PTRS_PER_PGD 1024 - #else - #define PTRS_PER_PTE 1024 - #define PTRS_PER_PMD 8 -@@ -66,6 +72,11 @@ - #ifdef CONFIG_SUN3 - #define KMAP_START 0x0DC00000 - #define KMAP_END 0x0E000000 -+#elif defined(CONFIG_COLDFIRE) -+#define VMALLOC_START 0xc0000000 -+#define VMALLOC_END 0xcfffffff -+#define KMAP_START (VMALLOC_END + 1) -+#define KMAP_END 0xe0000000 - #else - #define KMAP_START 0xd0000000 - #define KMAP_END 0xf0000000 -@@ -79,9 +90,11 @@ - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -+#if !defined(CONFIG_COLDFIRE) - #define VMALLOC_OFFSET (8*1024*1024) - #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) - #define VMALLOC_END KMAP_START -+#endif - #else - extern unsigned long vmalloc_end; - #define VMALLOC_START 0x0f800000 -@@ -130,6 +143,8 @@ static inline void update_mmu_cache(stru - - #ifdef CONFIG_SUN3 - #include <asm/sun3_pgtable.h> -+#elif defined(CONFIG_COLDFIRE) -+#include <asm/cf_pgtable.h> - #else - #include <asm/motorola_pgtable.h> - #endif -@@ -140,6 +155,9 @@ static inline void update_mmu_cache(stru - /* - * Macro to mark a page protection value as "uncacheable". - */ -+#ifdef CONFIG_COLDFIRE -+# define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE)) -+#else /* CONFIG_COLDFIRE */ - #ifdef SUN3_PAGE_NOCACHE - # define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE - #else -@@ -154,6 +172,7 @@ static inline void update_mmu_cache(stru - ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \ - : (prot))) - -+#endif /* CONFIG_COLDFIRE */ - #endif /* !__ASSEMBLY__ */ - - /* ---- a/include/asm-m68k/processor.h -+++ b/include/asm-m68k/processor.h -@@ -22,24 +22,38 @@ static inline unsigned long rdusp(void) - { - unsigned long usp; - -+#ifndef CONFIG_COLDFIRE - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); -+#else -+ __asm__ __volatile__("movel %/usp,%0" : "=a" (usp)); -+#endif - return usp; - } - - static inline void wrusp(unsigned long usp) - { -+#ifndef CONFIG_COLDFIRE - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -+#else -+ __asm__ __volatile__("movel %0,%/usp" : : "a" (usp)); -+#endif - } - - /* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ --#ifndef CONFIG_SUN3 -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) - #define TASK_SIZE (0xF0000000UL) -+#elif defined(CONFIG_COLDFIRE) -+#define TASK_SIZE (0xC0000000UL) -+#else /* CONFIG_SUN3 */ -+#ifdef __ASSEMBLY__ -+#define TASK_SIZE (0x0E000000) - #else - #define TASK_SIZE (0x0E000000UL) - #endif -+#endif - - #ifdef __KERNEL__ - #define STACK_TOP TASK_SIZE -@@ -49,9 +63,11 @@ static inline void wrusp(unsigned long u - /* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ --#ifndef CONFIG_SUN3 --#define TASK_UNMAPPED_BASE 0xC0000000UL --#else -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) -+#define TASK_UNMAPPED_BASE 0xC0000000UL -+#elif defined(CONFIG_COLDFIRE) -+#define TASK_UNMAPPED_BASE 0x80000000UL -+#else /* CONFIG_SUN3 */ - #define TASK_UNMAPPED_BASE 0x0A000000UL - #endif - #define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) -@@ -60,7 +76,11 @@ struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ -+#ifndef CONFIG_COLDFIRE - unsigned short fs; /* saved fs (sfc, dfc) */ -+#else -+ mm_segment_t fs; -+#endif - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long faddr; /* info about last fault */ -@@ -81,6 +101,7 @@ struct thread_struct { - /* - * Do necessary setup to start up a newly executed thread. - */ -+#ifndef CONFIG_COLDFIRE - static inline void start_thread(struct pt_regs * regs, unsigned long pc, - unsigned long usp) - { -@@ -91,6 +112,23 @@ static inline void start_thread(struct p - regs->sr &= ~0x2000; - wrusp(usp); - } -+#else -+/* -+ * Do necessary setup to start up a newly executed thread. -+ * -+ * pass the data segment into user programs if it exists, -+ * it can't hurt anything as far as I can tell -+ */ -+#define start_thread(_regs, _pc, _usp) \ -+do { \ -+ set_fs(USER_DS); /* reads from user space */ \ -+ (_regs)->pc = (_pc); \ -+ if (current->mm) \ -+ (_regs)->d5 = current->mm->start_data; \ -+ (_regs)->sr &= ~0x2000; \ -+ wrusp(_usp); \ -+} while (0) -+#endif - - /* Forward declaration, a strange C thing */ - struct task_struct; ---- a/include/asm-m68k/ptrace.h -+++ b/include/asm-m68k/ptrace.h -@@ -38,10 +38,21 @@ struct pt_regs { - long d0; - long orig_d0; - long stkadj; -+#ifndef CONFIG_COLDFIRE - unsigned short sr; - unsigned long pc; - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ -+#else -+ unsigned long mmuar; -+ unsigned long mmusr; -+ unsigned format : 4; /* frame format specifier */ -+ unsigned fs2 : 2; -+ unsigned vector: 8; -+ unsigned fs1 : 2; -+ unsigned short sr; -+ unsigned long pc; -+#endif - }; - - /* ---- a/include/asm-m68k/raw_io.h -+++ b/include/asm-m68k/raw_io.h -@@ -46,6 +46,29 @@ extern void __iounmap(void *addr, unsign - #define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w)) - #define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l)) - -+#if (defined CONFIG_COLDFIRE) && (defined CONFIG_PCI) -+unsigned char pci_inb(long addr); -+unsigned short pci_inw(long addr); -+unsigned long pci_inl(long addr); -+void pci_outb(unsigned char val, long addr); -+void pci_outw(unsigned short val, long addr); -+void pci_outl(unsigned long val, long addr); -+unsigned short pci_raw_inw(long addr); -+unsigned long pci_raw_inl(long addr); -+void pci_raw_outw(unsigned short val, long addr); -+void pci_raw_outl(unsigned long val, long addr); -+#define raw_inb(port) pci_inb((long)((volatile unsigned char *)(port))) -+#define raw_inw(port) pci_raw_inw((long)((volatile unsigned short *)(port))) -+#define raw_inl(port) pci_raw_inl((long)((volatile unsigned long *)(port))) -+ -+#define raw_outb(val,port) pci_outb((val),(long)((volatile unsigned char *)(port))) -+#define raw_outw(val,port) pci_raw_outw((val),(long)((volatile unsigned short *)(port))) -+#define raw_outl(val,port) pci_raw_outl((val),(long)((volatile unsigned long *)(port))) -+ -+#define swap_inw(port) pci_inw((long)((volatile unsigned short *)(port))) -+#define swap_outw(val,port) pci_outw((val),(long)((volatile unsigned short *)(port))) -+ -+#else - #define raw_inb in_8 - #define raw_inw in_be16 - #define raw_inl in_be32 -@@ -60,6 +83,9 @@ extern void __iounmap(void *addr, unsign - #define __raw_writew(val,addr) out_be16((addr),(val)) - #define __raw_writel(val,addr) out_be32((addr),(val)) - -+#define swap_inw(port) in_le16((port)) -+#define swap_outw(val,port) out_le16((port),(val)) -+#endif - static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len) - { - unsigned int i; -@@ -77,6 +103,7 @@ static inline void raw_outsb(volatile u8 - out_8(port, *buf++); - } - -+#ifndef CONFIG_COLDFIRE - static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr) - { - unsigned int tmp; -@@ -342,6 +369,63 @@ static inline void raw_outsw_swapw(volat - : "d0", "a0", "a1", "d6"); - } - -+ -+#else /*CONFIG_COLDFIRE */ -+ -+static inline void raw_insw(volatile u16 *port, u16 *buf, unsigned int nr) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < nr; i++) -+ *buf++ = raw_inw(port); -+} -+ -+static inline void raw_outsw(volatile u16 *port, const u16 *buf, -+ unsigned int nr) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < nr; i++, buf++) -+ raw_outw(*buf, port); -+} -+ -+static inline void raw_insl(volatile u32 *port, u32 *buf, unsigned int nr) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < nr; i++) -+ *buf++ = raw_inl(port); -+} -+ -+static inline void raw_outsl(volatile u32 *port, const u32 *buf, -+ unsigned int nr) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < nr; i++, buf++) -+ raw_outl(*buf, port); -+} -+ -+static inline void raw_insw_swapw(volatile u16 *port, u16 *buf, -+ unsigned int nr) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < nr; i++) -+ *buf++ = in_le16(port); -+ -+} -+ -+static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf, -+ unsigned int nr) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < nr; i++, buf++) -+ out_le16(port, *buf); -+} -+#endif /*CONFIG_COLDFIRE */ -+ - #endif /* __KERNEL__ */ - - #endif /* _RAW_IO_H */ ---- a/include/asm-m68k/segment.h -+++ b/include/asm-m68k/segment.h -@@ -29,6 +29,7 @@ typedef struct { - * Get/set the SFC/DFC registers for MOVES instructions - */ - -+#ifndef CONFIG_COLDFIRE - static inline mm_segment_t get_fs(void) - { - mm_segment_t _v; -@@ -50,6 +51,15 @@ static inline void set_fs(mm_segment_t v - : /* no outputs */ : "r" (val.seg) : "memory"); - } - -+#else /* CONFIG_COLDFIRE */ -+ -+#include <asm/current.h> -+#define get_fs() (current->thread.fs) -+#define set_fs(val) (current->thread.fs = (val)) -+#define get_ds() (KERNEL_DS) -+ -+#endif /* CONFIG_COLDFIRE */ -+ - #define segment_eq(a,b) ((a).seg == (b).seg) - - #endif /* __ASSEMBLY__ */ ---- a/include/asm-m68k/setup.h -+++ b/include/asm-m68k/setup.h -@@ -40,6 +40,7 @@ - #define MACH_HP300 9 - #define MACH_Q40 10 - #define MACH_SUN3X 11 -+#define MACH_CFMMU 12 - - #define COMMAND_LINE_SIZE 256 - -@@ -189,6 +190,14 @@ extern unsigned long m68k_machtype; - # define MACH_TYPE (MACH_SUN3X) - #endif - -+#if !defined(CONFIG_COLDFIRE) -+# define MACH_IS_COLDFIRE (0) -+#else -+# define CONFIG_COLDFIRE_ONLY -+# define MACH_IS_COLDFIRE (1) -+# define MACH_TYPE (MACH_CFMMU) -+#endif -+ - #ifndef MACH_TYPE - # define MACH_TYPE (m68k_machtype) - #endif -@@ -211,23 +220,31 @@ extern unsigned long m68k_machtype; - #define CPUB_68030 1 - #define CPUB_68040 2 - #define CPUB_68060 3 -+#define CPUB_CFV4E 4 - - #define CPU_68020 (1<<CPUB_68020) - #define CPU_68030 (1<<CPUB_68030) - #define CPU_68040 (1<<CPUB_68040) - #define CPU_68060 (1<<CPUB_68060) -+#define CPU_CFV4E (1<<CPUB_CFV4E) - - #define FPUB_68881 0 - #define FPUB_68882 1 - #define FPUB_68040 2 /* Internal FPU */ - #define FPUB_68060 3 /* Internal FPU */ - #define FPUB_SUNFPA 4 /* Sun-3 FPA */ -+#define FPUB_CFV4E 5 - - #define FPU_68881 (1<<FPUB_68881) - #define FPU_68882 (1<<FPUB_68882) - #define FPU_68040 (1<<FPUB_68040) - #define FPU_68060 (1<<FPUB_68060) - #define FPU_SUNFPA (1<<FPUB_SUNFPA) -+#ifndef CONFIG_M5445X -+#define FPU_CFV4E (1<<FPUB_CFV4E) -+#else -+#define FPU_CFV4E 0 -+#endif - - #define MMUB_68851 0 - #define MMUB_68030 1 /* Internal MMU */ -@@ -235,6 +252,7 @@ extern unsigned long m68k_machtype; - #define MMUB_68060 3 /* Internal MMU */ - #define MMUB_APOLLO 4 /* Custom Apollo */ - #define MMUB_SUN3 5 /* Custom Sun-3 */ -+#define MMUB_CFV4E 6 - - #define MMU_68851 (1<<MMUB_68851) - #define MMU_68030 (1<<MMUB_68030) -@@ -242,6 +260,7 @@ extern unsigned long m68k_machtype; - #define MMU_68060 (1<<MMUB_68060) - #define MMU_SUN3 (1<<MMUB_SUN3) - #define MMU_APOLLO (1<<MMUB_APOLLO) -+#define MMU_CFV4E (1<<MMUB_CFV4E) - - #ifdef __KERNEL__ - -@@ -341,6 +360,14 @@ extern int m68k_is040or060; - # endif - #endif - -+#if !defined(CONFIG_CFV4E) -+# define CPU_IS_COLDFIRE (0) -+#else -+# define CPU_IS_COLDFIRE (1) -+# define CPU_IS_CFV4E (1) -+# define MMU_IS_CFV4E (1) -+#endif -+ - #define CPU_TYPE (m68k_cputype) - - #ifdef CONFIG_M68KFPU_EMU ---- a/include/asm-m68k/signal.h -+++ b/include/asm-m68k/signal.h -@@ -150,6 +150,7 @@ typedef struct sigaltstack { - #ifdef __KERNEL__ - #include <asm/sigcontext.h> - -+#ifndef CONFIG_COLDFIRE - #define __HAVE_ARCH_SIG_BITOPS - - static inline void sigaddset(sigset_t *set, int _sig) -@@ -200,6 +201,10 @@ static inline int sigfindinword(unsigned - - struct pt_regs; - extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); -+#else -+ -+#define ptrace_signal_deliver(regs, cookie) do { } while (0) -+#endif /* CONFIG_COLDFIRE */ - - #endif /* __KERNEL__ */ - ---- a/include/asm-m68k/string.h -+++ b/include/asm-m68k/string.h -@@ -93,6 +93,7 @@ static inline char *strchr(const char *s - return (char *)s - 1; - } - -+#ifndef CONFIG_COLDFIRE - #define __HAVE_ARCH_STRCMP - static inline int strcmp(const char *cs, const char *ct) - { -@@ -110,6 +111,7 @@ static inline int strcmp(const char *cs, - : "+a" (cs), "+a" (ct), "=d" (res)); - return res; - } -+#endif - - #define __HAVE_ARCH_MEMSET - extern void *memset(void *, int, __kernel_size_t); ---- a/include/asm-m68k/system.h -+++ b/include/asm-m68k/system.h -@@ -5,9 +5,24 @@ - #include <linux/kernel.h> - #include <asm/segment.h> - #include <asm/entry.h> -+#include <asm/cfcache.h> - - #ifdef __KERNEL__ - -+#ifdef CONFIG_COLDFIRE -+#define FLUSH_BC (0x00040000) -+ -+#define finish_arch_switch(prev) do { \ -+ unsigned long tmpreg; \ -+ asm volatile ( "move.l %2,%0\n" \ -+ "orl %1,%0\n" \ -+ "movec %0,%%cacr" \ -+ : "=&d" (tmpreg) \ -+ : "id" (FLUSH_BC), "m" (shadow_cacr)); \ -+ } while(0) -+ -+#endif -+ - /* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This -@@ -63,16 +78,25 @@ asmlinkage void resume(void); - #define smp_read_barrier_depends() ((void)0) - - /* interrupt control.. */ --#if 0 --#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") --#else - #include <linux/hardirq.h> -+#ifndef CONFIG_COLDFIRE - #define local_irq_enable() ({ \ - if (MACH_IS_Q40 || !hardirq_count()) \ - asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory"); \ - }) --#endif - #define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") -+#else /* CONFIG_COLDFIRE */ -+#define local_irq_enable() \ -+ asm volatile ("move.w %%sr, %%d0\n\t" \ -+ "andil #0xf8ff,%%d0\n\t" \ -+ "move.w %%d0, %%sr\n" \ -+ : : : "cc", "d0", "memory") -+#define local_irq_disable() \ -+ asm volatile ("move %/sr,%%d0\n\t" \ -+ "ori.l #0x0700,%%d0\n\t" \ -+ "move %%d0,%/sr\n" \ -+ : : : "cc", "%d0", "memory") -+#endif - #define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") - #define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") - ---- a/include/asm-m68k/thread_info.h -+++ b/include/asm-m68k/thread_info.h -@@ -58,5 +58,6 @@ struct thread_info { - #define TIF_DELAYED_TRACE 14 /* single step a syscall */ - #define TIF_SYSCALL_TRACE 15 /* syscall trace active */ - #define TIF_MEMDIE 16 -+#define TIF_FREEZE 17 /* freezing processes */ - - #endif /* _ASM_M68K_THREAD_INFO_H */ ---- a/include/asm-m68k/tlbflush.h -+++ b/include/asm-m68k/tlbflush.h -@@ -2,7 +2,7 @@ - #define _M68K_TLBFLUSH_H - - --#ifndef CONFIG_SUN3 -+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) - - #include <asm/current.h> - -@@ -92,7 +92,12 @@ static inline void flush_tlb_kernel_rang - flush_tlb_all(); - } - --#else -+static inline void flush_tlb_pgtables(struct mm_struct *mm, -+ unsigned long start, unsigned long end) -+{ -+} -+ -+#elif defined(CONFIG_SUN3) - - - /* Reserved PMEGs. */ -@@ -214,6 +219,13 @@ static inline void flush_tlb_kernel_page - sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG); - } - -+static inline void flush_tlb_pgtables(struct mm_struct *mm, -+ unsigned long start, unsigned long end) -+{ -+} -+ -+#else /* CONFIG_COLDFIRE */ -+#include <asm/cf_tlbflush.h> - #endif - - #endif /* _M68K_TLBFLUSH_H */ ---- a/include/asm-m68k/uaccess.h -+++ b/include/asm-m68k/uaccess.h -@@ -1,6 +1,9 @@ - #ifndef __M68K_UACCESS_H - #define __M68K_UACCESS_H - -+#ifdef CONFIG_COLDFIRE -+#include <asm/cf_uaccess.h> -+#else - /* - * User space memory access functions - */ -@@ -367,4 +370,5 @@ unsigned long __clear_user(void __user * - - #define strlen_user(str) strnlen_user(str, 32767) - -+#endif /* CONFIG_COLDFIRE */ - #endif /* _M68K_UACCESS_H */ ---- a/include/asm-m68k/virtconvert.h -+++ b/include/asm-m68k/virtconvert.h -@@ -46,9 +46,14 @@ static inline void *phys_to_virt(unsigne - #define virt_to_bus(a) (virt_to_phys(a) + (MACH_IS_HADES ? 0x80000000 : 0)) - #define bus_to_virt(a) (phys_to_virt((a) - (MACH_IS_HADES ? 0x80000000 : 0))) - #else -+#ifdef CONFIG_COLDFIRE -+#define virt_to_bus(a) (a - PAGE_OFFSET + PCI_DMA_BASE) -+#define bus_to_virt(a) (a - PCI_DMA_BASE + PAGE_OFFSET) -+#else /* CONFIG_COLDFIRE */ - #define virt_to_bus virt_to_phys - #define bus_to_virt phys_to_virt - #endif -+#endif - - #endif - #endif ---- /dev/null -+++ b/include/linux/can/dev.h -@@ -0,0 +1,62 @@ -+/* -+ * linux/can/dev.h -+ * -+ * Definitions for CAN controller network devices lib (work in progress) -+ * -+ * * * $Id$ -+ * -+ * Author: Andrey Volkov <avolkov@varma-el.com> -+ * Copyright (c) 2006 Varma Electronics Oy -+ * -+ */ -+ -+#ifndef CAN_DEVICE_H -+#define CAN_DEVICE_H -+ -+#include <linux/version.h> -+#include <linux/can/error.h> -+#include <linux/can/ioctl.h> -+ -+struct can_priv { -+ struct can_device_stats can_stats; -+ -+ /* can-bus oscillator frequency, in Hz, -+ BE CAREFUL! SOME CONTROLLERS (LIKE SJA1000) -+ FOOLISH ABOUT THIS FRQ (for sja1000 as ex. this -+ clock must be xtal clock divided by 2). */ -+ u32 can_sys_clock; -+ -+ /* by default max_brp is equal 64, -+ but for a Freescale TouCAN, as ex., it can be 255*/ -+ u32 max_brp; -+ /* For the mostly all controllers, max_sjw is equal 4, but -+ some, hmm, CAN implementations hardwared it to 1 */ -+ u8 max_sjw; -+ -+ u32 baudrate; /* in bauds */ -+ struct can_bittime bit_time; -+ -+ spinlock_t irq_lock; -+ /* Please hold this lock when touching net_stats/can_stats*/ -+ spinlock_t stats_lock; -+ -+ can_state_t state; -+ can_mode_t mode; -+ can_ctrlmode_t ctrlmode; -+ -+ int (*do_set_bit_time)(struct net_device *dev, struct can_bittime *br); -+ int (*do_get_state) (struct net_device *dev, can_state_t *state); -+ int (*do_set_mode) (struct net_device *dev, can_mode_t mode); -+ int (*do_set_ctrlmode)(struct net_device *dev, can_ctrlmode_t ctrlmode); -+ int (*do_get_ctrlmode)(struct net_device *dev, can_ctrlmode_t *ctrlmode); -+}; -+ -+#define ND2D(_ndev) (_ndev->dev.parent) -+ -+struct net_device *alloc_candev(int sizeof_priv); -+void free_candev(struct net_device *dev); -+ -+int can_calc_bit_time(struct can_priv *can, u32 baudrate, -+ struct can_bittime_std *bit_time); -+ -+#endif /* CAN_DEVICE_H */ ---- /dev/null -+++ b/include/linux/can/ioctl.h -@@ -0,0 +1,152 @@ -+/* -+ * linux/can/ioctl.h -+ * -+ * Definitions for CAN controller setup (work in progress) -+ * -+ * $Id$ -+ * -+ * Send feedback to <socketcan-users@lists.berlios.de> -+ * -+ */ -+ -+#ifndef CAN_IOCTL_H -+#define CAN_IOCTL_H -+ -+#include <linux/sockios.h> -+ -+ -+/* max. 16 private ioctls */ -+ -+#define SIOCSCANBAUDRATE (SIOCDEVPRIVATE+0) -+#define SIOCGCANBAUDRATE (SIOCDEVPRIVATE+1) -+ -+#define SIOCSCANCUSTOMBITTIME (SIOCDEVPRIVATE+2) -+#define SIOCGCANCUSTOMBITTIME (SIOCDEVPRIVATE+3) -+ -+#define SIOCSCANMODE (SIOCDEVPRIVATE+4) -+#define SIOCGCANMODE (SIOCDEVPRIVATE+5) -+ -+#define SIOCSCANCTRLMODE (SIOCDEVPRIVATE+6) -+#define SIOCGCANCTRLMODE (SIOCDEVPRIVATE+7) -+ -+#define SIOCSCANFILTER (SIOCDEVPRIVATE+8) -+#define SIOCGCANFILTER (SIOCDEVPRIVATE+9) -+ -+#define SIOCGCANSTATE (SIOCDEVPRIVATE+10) -+#define SIOCGCANSTATS (SIOCDEVPRIVATE+11) -+ -+#define SIOCSCANERRORCONFIG (SIOCDEVPRIVATE+12) -+#define SIOCGCANERRORCONFIG (SIOCDEVPRIVATE+13) -+ -+/* parameters for ioctls */ -+ -+/* SIOC[SG]CANBAUDRATE */ -+/* baudrate for CAN-controller in bits per second. */ -+/* 0 = Scan for baudrate (Autobaud) */ -+ -+typedef __u32 can_baudrate_t; -+ -+ -+/* SIOC[SG]CANCUSTOMBITTIME */ -+ -+typedef enum CAN_BITTIME_TYPE { -+ CAN_BITTIME_STD, -+ CAN_BITTIME_BTR -+} can_bittime_type_t; -+ -+/* TSEG1 of controllers usually is a sum of synch_seg (always 1), -+ * prop_seg and phase_seg1, TSEG2 = phase_seg2 */ -+ -+struct can_bittime_std { -+ __u32 brp; /* baud rate prescaler */ -+ __u8 prop_seg; /* from 1 to 8 */ -+ __u8 phase_seg1; /* from 1 to 8 */ -+ __u8 phase_seg2; /* from 1 to 8 */ -+ __u8 sjw:7; /* from 1 to 4 */ -+ __u8 sam:1; /* 1 - enable triple sampling */ -+}; -+ -+struct can_bittime_btr { -+ __u8 btr0; -+ __u8 btr1; -+}; -+ -+struct can_bittime { -+ can_bittime_type_t type; -+ union { -+ struct can_bittime_std std; -+ struct can_bittime_btr btr; -+ }; -+}; -+ -+#define CAN_BAUDRATE_UNCONFIGURED ((__u32) 0xFFFFFFFFU) -+#define CAN_BAUDRATE_UNKNOWN 0 -+ -+/* SIOC[SG]CANMODE */ -+ -+typedef __u32 can_mode_t; -+ -+#define CAN_MODE_STOP 0 -+#define CAN_MODE_START 1 -+#define CAN_MODE_SLEEP 2 -+ -+ -+/* SIOC[SG]CANCTRLMODE */ -+ -+typedef __u32 can_ctrlmode_t; -+ -+#define CAN_CTRLMODE_LOOPBACK 0x1 -+#define CAN_CTRLMODE_LISTENONLY 0x2 -+ -+ -+/* SIOCGCANFILTER */ -+ -+typedef __u32 can_filter_t; -+ -+/* filter modes (may vary due to controller specific capabilities) */ -+#define CAN_FILTER_CAPAB 0 /* get filter type capabilities -+ (32 Bit value) */ -+#define CAN_FILTER_MASK_VALUE 1 /* easy bit filter (see struct can_filter) */ -+#define CAN_FILTER_SFF_BITMASK 2 /* bitfield with 2048 bit SFF filter */ -+ /* filters 3 - 31 currently undefined */ -+ -+#define CAN_FILTER_MAX 31 /* max. filter type value */ -+ -+ -+/* SIOCGCANSTATE */ -+ -+typedef __u32 can_state_t; -+ -+#define CAN_STATE_ACTIVE 0 -+#define CAN_STATE_BUS_WARNING 1 -+#define CAN_STATE_BUS_PASSIVE 2 -+#define CAN_STATE_BUS_OFF 3 -+#define CAN_STATE_SCANNING_BAUDRATE 4 -+#define CAN_STATE_STOPPED 5 -+#define CAN_STATE_SLEEPING 6 -+ -+ -+/* SIOCGCANSTATS */ -+ -+struct can_device_stats { -+ int error_warning; -+ int data_overrun; -+ int wakeup; -+ int bus_error; -+ int error_passive; -+ int arbitration_lost; -+ int restarts; -+ int bus_error_at_init; -+}; -+ -+/* SIOC[SG]CANERRORCONFIG */ -+ -+typedef enum CAN_ERRCFG_TYPE { -+ CAN_ERRCFG_MASK, -+ CAN_ERRCFG_BUSERR, -+ CAN_ERRCFG_BUSOFF -+} can_errcfg_type_t; -+ -+/* tbd */ -+ -+#endif /* CAN_IOCTL_H */ ---- /dev/null -+++ b/include/linux/can/version.h -@@ -0,0 +1,22 @@ -+/* -+ * linux/can/version.h -+ * -+ * Version information for the CAN network layer implementation -+ -+ * Author: Urs Thuermann <urs.thuermann@volkswagen.de> -+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research -+ * All rights reserved. -+ * -+ * Send feedback to <socketcan-users@lists.berlios.de> -+ * -+ */ -+ -+#ifndef CAN_VERSION_H -+#define CAN_VERSION_H -+ -+#define RCSID(s) asm(".section .rodata.str1.1,\"aMS\",@progbits,1\n\t" \ -+ ".string \"" s "\"\n\t.previous\n") -+ -+RCSID("$Id$"); -+ -+#endif /* CAN_VERSION_H */ ---- a/include/linux/fb.h -+++ b/include/linux/fb.h -@@ -873,6 +873,17 @@ struct fb_info { - #define fb_writeq sbus_writeq - #define fb_memset sbus_memset_io - -+#elif defined(CONFIG_COLDFIRE) -+#define fb_readb readb -+#define fb_readw readw -+#define fb_readl readl -+#define fb_readq readq -+#define fb_writeb writeb -+#define fb_writew writew -+#define fb_writel writel -+#define fb_writeq writeq -+#define fb_memset memset_io -+ - #elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__) - - #define fb_readb __raw_readb -@@ -899,7 +910,7 @@ struct fb_info { - - #endif - --#if defined (__BIG_ENDIAN) -+#if defined (__BIG_ENDIAN) && !defined(CONFIG_COLDFIRE) - #define FB_LEFT_POS(bpp) (32 - bpp) - #define FB_SHIFT_HIGH(val, bits) ((val) >> (bits)) - #define FB_SHIFT_LOW(val, bits) ((val) << (bits)) ---- a/include/linux/fsl_devices.h -+++ b/include/linux/fsl_devices.h -@@ -91,6 +91,19 @@ enum fsl_usb2_operating_modes { - FSL_USB2_DR_OTG, - }; - -+/* DDD -+ * replace _operating_modes with _controller -+ * -+ * the operating_mode tests in fsl_platform_verify() aren't needed, -+ * since the ehci driver isn't going to be probe()d unless it's -+ * "fsl-ehci" device anyway, and what we really need to know is -+ * which controller (MPH/DR) we're dealing with -+ */ -+enum fsl_usb2_controller { -+ FSL_USB2_MPH, -+ FSL_USB2_DR, -+}; -+ - enum fsl_usb2_phy_modes { - FSL_USB2_PHY_NONE, - FSL_USB2_PHY_ULPI, -@@ -101,9 +114,36 @@ enum fsl_usb2_phy_modes { - - struct fsl_usb2_platform_data { - /* board specific information */ -- enum fsl_usb2_operating_modes operating_mode; -+ /* -+ * DDD see note above -+ * enum fsl_usb2_operating_modes operating_mode; -+ */ -+ enum fsl_usb2_controller controller; - enum fsl_usb2_phy_modes phy_mode; - unsigned int port_enables; -+ /* -+ * DDD this could arguably be moved to a separate -+ * fsl usb2 device header file -+ */ -+ char *name; /* pretty print */ -+ int (*platform_init) (struct platform_device *); -+ void (*platform_uninit) (struct platform_device *); -+ int (*platform_verify) (struct platform_device *); -+ u32 xcvr_type; /* PORTSCX_PTS_* */ -+ u32 view; /* ULPI viewport register */ -+ u32 r_start; /* start of MEM resource */ -+ u32 r_len; /* length of MEM resource */ -+ void __iomem *regs; /* ioremap'd register base */ -+ unsigned big_endian_mmio : 1; -+ unsigned big_endian_desc : 1; -+ unsigned es : 1; /* need USBMODE:ES */ -+ unsigned have_sysif_regs : 1; -+ unsigned le_setup_buf : 1; -+ unsigned does_otg : 1; /* set IFF it's an OTG port */ -+ -+ unsigned power_budget; /* for hcd->power_budget */ -+ struct fsl_xcvr_ops *xcvr_ops; -+ int max_ep_nr; /* max # of endpoints */ - }; - - /* Flags in fsl_usb2_mph_platform_data */ -@@ -126,5 +166,16 @@ struct mpc8xx_pcmcia_ops { - int(*voltage_set)(int slot, int vcc, int vpp); - }; - -+struct fsl_ata_platform_data { -+#ifdef CONFIG_FSL_PATA_USE_DMA -+ int udma_mask; /* UDMA modes h/w can handle */ -+ int fifo_alarm; /* value for fifo_alarm reg */ -+ int max_sg; /* longest sglist h/w can handle */ -+#endif -+ int (*init)(struct platform_device *pdev); -+ void (*exit)(void); -+ int (*get_clk_rate)(void); -+}; -+ - #endif /* _FSL_DEVICE_H_ */ - #endif /* __KERNEL__ */ ---- a/include/linux/pci.h -+++ b/include/linux/pci.h -@@ -458,8 +458,10 @@ int __must_check pcibios_enable_device(s - char *pcibios_setup(char *str); - - /* Used only when drivers/pci/setup.c is used */ -+#ifndef CONFIG_COLDFIRE - void pcibios_align_resource(void *, struct resource *, resource_size_t, - resource_size_t); -+#endif - void pcibios_update_irq(struct pci_dev *, int irq); - - /* Generic PCI functions used internally */ ---- /dev/null -+++ b/include/linux/spi/mcfqspi.h -@@ -0,0 +1,80 @@ -+/****************************************************************************/ -+ -+/* -+ * mcfqspi.c - Master QSPI controller for the ColdFire processors -+ * -+ * (C) Copyright 2005, Intec Automation, -+ * Mike Lavender (mike@steroidmicros) -+ * -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -+/* ------------------------------------------------------------------------- */ -+ -+#ifndef MCFQSPI_H_ -+#define MCFQSPI_H_ -+ -+#define QSPI_CS_INIT 0x01 -+#define QSPI_CS_ASSERT 0x02 -+#define QSPI_CS_DROP 0x04 -+ -+#define QSPIIOCS_DOUT_HIZ 1 /* QMR[DOHIE] set hi-z dout between transfers */ -+#define QSPIIOCS_BITS 2 /* QMR[BITS] set transfer size */ -+#define QSPIIOCG_BITS 3 /* QMR[BITS] get transfer size */ -+#define QSPIIOCS_CPOL 4 /* QMR[CPOL] set SCK inactive state */ -+#define QSPIIOCS_CPHA 5 /* QMR[CPHA] set SCK phase, 1=rising edge */ -+#define QSPIIOCS_BAUD 6 /* QMR[BAUD] set SCK baud rate divider */ -+#define QSPIIOCS_QCD 7 /* QDLYR[QCD] set start delay */ -+#define QSPIIOCS_DTL 8 /* QDLYR[DTL] set after delay */ -+#define QSPIIOCS_CONT 9 /* continuous CS asserted during transfer */ -+#define QSPIIOCS_READDATA 10 /* set data send during read */ -+#define QSPIIOCS_ODD_MOD 11 /* if length of buffer is a odd number, 16-bit transfers */ -+ /* are finalized with a 8-bit transfer */ -+#define QSPIIOCS_DSP_MOD 12 /* transfers are bounded to 15/30 bytes (a multiple of 3 bytes = 1 DSPword) */ -+#define QSPIIOCS_POLL_MOD 13 /* driver uses polling instead of interrupts */ -+ -+#define QSPIIOCS_SET_CSIV 14 /* sets CSIV flag (cs inactive level) */ -+ -+#ifdef CONFIG_M520x -+#undef MCF_GPIO_PAR_QSPI -+#define MCF_GPIO_PAR_QSPI (0xA4034) -+#endif -+ -+struct coldfire_spi_master { -+ u16 bus_num; -+ u16 num_chipselect; -+ u8 irq_source; -+ u32 irq_vector; -+ u32 irq_mask; -+ u8 irq_lp; -+ u8 par_val; -+ u16 par_val16; -+ void (*cs_control)(u8 cs, u8 command); -+}; -+ -+ -+struct coldfire_spi_chip { -+ u8 mode; -+ u8 bits_per_word; -+ u8 del_cs_to_clk; -+ u8 del_after_trans; -+ u16 void_write_data; -+}; -+ -+typedef struct qspi_read_data { -+ __u32 length; -+ __u8 *buf; /* data to send during read */ -+ unsigned int loop : 1; -+} qspi_read_data; -+#endif /*MCFQSPI_H_*/ ---- /dev/null -+++ b/include/linux/usb/fsl_usb2.h -@@ -0,0 +1,463 @@ -+/* -+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/* -+ * Freescale USB device/endpoint management registers -+ */ -+#ifndef __FSL_USB2_H -+#define __FSL_USB2_H -+ -+ -+ /* USB DR device mode registers (Little Endian) */ -+struct fsl_usb_device_regs { -+ /* Capability register */ -+ u32 id; -+ u32 res1[63]; -+ u16 caplength; /* Capability Register Length */ -+ u16 hciversion; /* Host Controller Interface Version */ -+ u32 hcsparams; /* Host Controller Structual Parameters */ -+ u32 hccparams; /* Host Controller Capability Parameters */ -+ u32 res2[5]; -+ u32 dciversion; /* Device Controller Interface Version */ -+ u32 dccparams; /* Device Controller Capability Parameters */ -+ u32 res3[6]; -+ /* Operation register */ -+ u32 usbcmd; /* USB Command Register */ -+ u32 usbsts; /* USB Status Register */ -+ u32 usbintr; /* USB Interrupt Enable Register */ -+ u32 frindex; /* Frame Index Register */ -+ u32 res4; -+ u32 deviceaddr; /* Device Address */ -+ u32 endpointlistaddr; /* Endpoint List Address Register */ -+ u32 res5; -+ u32 burstsize; /* Master Interface Data Burst Size Register */ -+ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ -+ u32 res6[2]; -+ u32 ulpiview; -+ u32 res7[3]; -+ u32 configflag; /* Configure Flag Register */ -+ u32 portsc1; /* Port 1 Status and Control Register */ -+ u32 res8[7]; -+ u32 otgsc; /* On-The-Go Status and Control */ -+ u32 usbmode; /* USB Mode Register */ -+ u32 endptsetupstat; /* Endpoint Setup Status Register */ -+ u32 endpointprime; /* Endpoint Initialization Register */ -+ u32 endptflush; /* Endpoint Flush Register */ -+ u32 endptstatus; /* Endpoint Status Register */ -+ u32 endptcomplete; /* Endpoint Complete Register */ -+#if 0 -+ u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */ -+#else -+ // DDD see DCCPARAMS:DEN for the real number of device endpoints -+ // DDD 16 is the max -+ u32 endptctrl[16]; /* Endpoint Control Registers */ -+#endif -+}; -+ -+ /* USB DR host mode registers (Little Endian) */ -+struct fsl_usb_host_regs { -+ /* Capability register */ -+ u32 id; -+ u32 res1[63]; -+ u16 caplength; /* Capability Register Length */ -+ u16 hciversion; /* Host Controller Interface Version */ -+ u32 hcsparams; /* Host Controller Structual Parameters */ -+ u32 hccparams; /* Host Controller Capability Parameters */ -+ u32 res2[5]; -+ u32 dciversion; /* Device Controller Interface Version */ -+ u32 dccparams; /* Device Controller Capability Parameters */ -+ u32 res3[6]; -+ /* Operation register */ -+ u32 usbcmd; /* USB Command Register */ -+ u32 usbsts; /* USB Status Register */ -+ u32 usbintr; /* USB Interrupt Enable Register */ -+ u32 frindex; /* Frame Index Register */ -+ u32 res4; -+ u32 periodiclistbase; /* Periodic Frame List Base Address Register */ -+ u32 asynclistaddr; /* Current Asynchronous List Address Register */ -+ u32 res5; -+ u32 burstsize; /* Master Interface Data Burst Size Register */ -+ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ -+ u32 res6[2]; -+ u32 ulpiview; -+ u32 res7[3]; -+ u32 configflag; /* Configure Flag Register */ -+ u32 portsc1; /* Port 1 Status and Control Register */ -+ u32 res8[7]; -+ u32 otgsc; /* On-The-Go Status and Control */ -+ u32 usbmode; /* USB Mode Register */ -+ u32 endptsetupstat; /* Endpoint Setup Status Register */ -+ u32 endpointprime; /* Endpoint Initialization Register */ -+ u32 endptflush; /* Endpoint Flush Register */ -+ u32 endptstatus; /* Endpoint Status Register */ -+ u32 endptcomplete; /* Endpoint Complete Register */ -+#if 0 -+ u32 endptctrl[USB_MAX_ENDPOINTS]; /* Endpoint Control Registers */ -+#else -+ /* DDD see DCCPARAMS:DEN for the real number of device endpoints */ -+ /* DDD 16 is the max */ -+ u32 endptctrl[16]; /* Endpoint Control Registers */ -+#endif -+}; -+ -+ /* non-EHCI USB system interface registers (Big Endian) */ -+struct usb_sys_interface { -+ u32 snoop1; -+ u32 snoop2; -+ u32 age_cnt_thresh; /* Age Count Threshold Register */ -+ u32 pri_ctrl; /* Priority Control Register */ -+ u32 si_ctrl; /* System Interface Control Register */ -+ u32 res[59]; -+ u32 control; /* General Purpose Control Register */ -+}; -+ -+/* ep0 transfer state */ -+#define WAIT_FOR_SETUP 0 -+#define DATA_STATE_XMIT 1 -+#define DATA_STATE_NEED_ZLP 2 -+#define WAIT_FOR_OUT_STATUS 3 -+#define DATA_STATE_RECV 4 -+ -+/* Frame Index Register Bit Masks */ -+#define USB_FRINDEX_MASKS 0x3fff -+ -+ -+ -+/* USBCMD Register Bit Masks */ -+#define USB_CMD_RUN_STOP 0x00000001 -+#define USB_CMD_CTRL_RESET 0x00000002 -+#define USB_CMD_PERIODIC_SCHEDULE_EN 0x00000010 -+#define USB_CMD_ASYNC_SCHEDULE_EN 0x00000020 -+#define USB_CMD_INT_AA_DOORBELL 0x00000040 -+#define USB_CMD_ASP 0x00000300 -+#define USB_CMD_ASYNC_SCH_PARK_EN 0x00000800 -+#define USB_CMD_SUTW 0x00002000 -+#define USB_CMD_ATDTW 0x00004000 -+#define USB_CMD_ITC 0x00FF0000 -+ -+/* bit 15,3,2 are frame list size */ -+#define USB_CMD_FRAME_SIZE_1024 0x00000000 -+#define USB_CMD_FRAME_SIZE_512 0x00000004 -+#define USB_CMD_FRAME_SIZE_256 0x00000008 -+#define USB_CMD_FRAME_SIZE_128 0x0000000C -+#define USB_CMD_FRAME_SIZE_64 0x00008000 -+#define USB_CMD_FRAME_SIZE_32 0x00008004 -+#define USB_CMD_FRAME_SIZE_16 0x00008008 -+#define USB_CMD_FRAME_SIZE_8 0x0000800C -+ -+/* bit 9-8 are async schedule park mode count */ -+#define USB_CMD_ASP_00 0x00000000 -+#define USB_CMD_ASP_01 0x00000100 -+#define USB_CMD_ASP_10 0x00000200 -+#define USB_CMD_ASP_11 0x00000300 -+#define USB_CMD_ASP_BIT_POS 8 -+ -+/* bit 23-16 are interrupt threshold control */ -+#define USB_CMD_ITC_NO_THRESHOLD 0x00000000 -+#define USB_CMD_ITC_1_MICRO_FRM 0x00010000 -+#define USB_CMD_ITC_2_MICRO_FRM 0x00020000 -+#define USB_CMD_ITC_4_MICRO_FRM 0x00040000 -+#define USB_CMD_ITC_8_MICRO_FRM 0x00080000 -+#define USB_CMD_ITC_16_MICRO_FRM 0x00100000 -+#define USB_CMD_ITC_32_MICRO_FRM 0x00200000 -+#define USB_CMD_ITC_64_MICRO_FRM 0x00400000 -+#define USB_CMD_ITC_BIT_POS 16 -+ -+ -+ -+ -+/* USB STS Register Bit Masks */ -+#define USB_STS_INT 0x00000001 -+#define USB_STS_ERR 0x00000002 -+#define USB_STS_PORT_CHANGE 0x00000004 -+#define USB_STS_FRM_LST_ROLL 0x00000008 -+#define USB_STS_SYS_ERR 0x00000010 -+#define USB_STS_IAA 0x00000020 -+#define USB_STS_RESET 0x00000040 -+#define USB_STS_SOF 0x00000080 -+#define USB_STS_SUSPEND 0x00000100 -+#define USB_STS_HC_HALTED 0x00001000 -+#define USB_STS_RCL 0x00002000 -+#define USB_STS_PERIODIC_SCHEDULE 0x00004000 -+#define USB_STS_ASYNC_SCHEDULE 0x00008000 -+ -+/* USB INTR Register Bit Masks */ -+#define USB_INTR_INT_EN 0x00000001 -+#define USB_INTR_ERR_INT_EN 0x00000002 -+#define USB_INTR_PTC_DETECT_EN 0x00000004 -+#define USB_INTR_FRM_LST_ROLL_EN 0x00000008 -+#define USB_INTR_SYS_ERR_EN 0x00000010 -+#define USB_INTR_ASYN_ADV_EN 0x00000020 -+#define USB_INTR_RESET_EN 0x00000040 -+#define USB_INTR_SOF_EN 0x00000080 -+#define USB_INTR_DEVICE_SUSPEND 0x00000100 -+ -+/* Device Address bit masks */ -+#define USB_DEVICE_ADDRESS_MASK 0xFE000000 -+#define USB_DEVICE_ADDRESS_BIT_POS 25 -+ -+/* endpoint list address bit masks */ -+#define USB_EP_LIST_ADDRESS_MASK 0xfffff800 -+ -+ -+/* x_PORTSCx */ -+/* bit 31-30 are port transceiver select */ -+#define PORTSCX_PTS_MASK (3 << 30) /* parallel xcvr select mask */ -+#define PORTSCX_PHY_TYPE_SEL PORTSCX_PTS_MASK -+#define PORTSCX_PTS_UTMI (0 << 30) /* UTMI/UTMI+ */ -+#define PORTSCX_PTS_PHILIPS (1 << 30) /* Philips classic */ -+#define PORTSCX_PTS_ULPI (2 << 30) /* ULPI */ -+#define PORTSCX_PTS_SERIAL (3 << 30) /* serial */ -+#define PORTSCX_PTS_FSLS PORTSCX_PTS_SERIAL -+#define PORTSCX_PTS_ONCHIP PORTSCX_PTS_FSLS -+ -+#define PORTSCX_STS (1 << 29) /* serial xcvr select */ -+ -+/* bit 28 is parallel transceiver width for UTMI interface */ -+#define PORTSCX_PTW_8BIT (0 << 28) /* 8 bit parallel xcvr */ -+#define PORTSCX_PTW_16BIT (1 << 28) /* 16 bi parallel xcvr */ -+ -+/* bit 27-26 are port speed */ -+#define PORTSCX_PORT_SPEED_FULL (0 << 26) -+#define PORTSCX_PORT_SPEED_LOW (1 << 26) -+#define PORTSCX_PORT_SPEED_HIGH (2 << 26) -+#define PORTSCX_PORT_SPEED_UNDEF (3 << 26) -+#define PORTSCX_PORT_SPEED_MASK (3 << 26) -+ -+#define PORTSCX_PHY_LOW_POWER_SPD (1 << 23) /* phy low pwr suspend/clk disable */ -+ -+/* bit 19-16 are port test control */ -+#define PORTSCX_PTC_DISABLE (0 << 16) -+#define PORTSCX_PTC_JSTATE (1 << 16) -+#define PORTSCX_PTC_KSTATE (2 << 16) -+#define PORTSCX_PTC_SEQNAK (3 << 16) /* SE0 (host) / NAK (device) */ -+#define PORTSCX_PTC_PACKET (4 << 16) -+#define PORTSCX_PTC_FORCE_EN_HS (5 << 16) -+#define PORTSCX_PTC_FORCE_EN_FS (6 << 16) -+#define PORTSCX_PTC_FORCE_EN_LS (7 << 16) -+ -+ -+/* bit 15-14 are port indicator control */ -+#define PORTSCX_PIC_OFF (0 << 14) -+#define PORTSCX_PIC_AMBER (1 << 14) -+#define PORTSCX_PIC_GREEN (2 << 14) -+#define PORTSCX_PIC_UNDEF (3 << 14) -+ -+#define PORTSCX_PORT_POWER (1 << 12) /* port power */ -+ -+/* bit 11-10 are line status */ -+#define PORTSCX_LS_MASK (3 << 10) /* Line State mask */ -+#define PORTSCX_LS_SE0 (0 << 10) /* SE0 */ -+#define PORTSCX_LS_K_STATE (1 << 10) /* K-state */ -+#define PORTSCX_LS_J_STATE (2 << 10) /* J-state */ -+ -+#define PORTSCX_PORT_RESET (1 << 8) /* Port reset */ -+#define PORTSCX_PORT_SUSPEND (1 << 7) /* Suspend */ -+#define PORTSCX_PORT_FORCE_RESUME (1 << 6) /* Force port resume */ -+#define PORTSCX_OVER_CURRENT_CHG (1 << 5) /* over current change */ -+#define PORTSCX_OVER_CURRENT_ACT (1 << 4) /* over currrent active */ -+#define PORTSCX_PORT_EN_DIS_CHANGE (1 << 3) /* port {en,dis}able change */ -+#define PORTSCX_PORT_ENABLE (1 << 2) /* port enabled */ -+#define PORTSCX_CONNECT_STATUS_CHANGE (1 << 1) /* connect status change */ -+#define PORTSCX_CURRENT_CONNECT_STATUS (1 << 0) /* current connect status */ -+ -+#define PORTSCX_W1C_BITS \ -+ ( PORTSCX_CONNECT_STATUS_CHANGE | \ -+ PORTSCX_PORT_EN_DIS_CHANGE | \ -+ PORTSCX_OVER_CURRENT_CHG ) -+ -+ -+ -+/* UOG_OTGSC Register Bits */ -+/* control bits: */ -+#define OTGSC_CTRL_VBUS_DISCHARGE (1 << 0) -+#define OTGSC_CTRL_VBUS_CHARGE (1 << 1) -+#define OTGSC_CTRL_OTG_TERM (1 << 3) /* controls DM pulldown */ -+#define OTGSC_CTRL_DATA_PULSING (1 << 4) -+#define OTGSC_CTRL_USB_ID_PU (1 << 5) /* enable ID pullup */ -+/* current status: (R/O) */ -+#define OTGSC_STS_USB_ID (1 << 8) /* 0=A-device 1=B-device */ -+#define OTGSC_STS_A_VBUS_VALID (1 << 9) -+#define OTGSC_STS_A_SESSION_VALID (1 << 10) -+#define OTGSC_STS_B_SESSION_VALID (1 << 11) -+#define OTGSC_STS_B_SESSION_END (1 << 12) -+#define OTGSC_STS_1ms_TIMER (1 << 13) -+#define OTGSC_STS_DATA_PULSE (1 << 14) -+/* interrupt status: (write to clear) */ -+#define OTGSC_INTSTS_MASK (0x7f << 16) -+#define OTGSC_INTSTS_USB_ID (1 << 16) -+#define OTGSC_INTSTS_A_VBUS_VALID (1 << 17) -+#define OTGSC_INTSTS_A_SESSION_VALID (1 << 18) -+#define OTGSC_INTSTS_B_SESSION_VALID (1 << 19) -+#define OTGSC_INTSTS_B_SESSION_END (1 << 20) -+#define OTGSC_INTSTS_1MS_TIMER (1 << 21) -+#define OTGSC_INTSTS_DATA_PULSE (1 << 22) -+/* interrupt enables: */ -+#define OTGSC_IE_MASK (0x7f << 24) -+#define OTGSC_IE_USB_ID (1 << 24) -+#define OTGSC_IE_A_VBUS_VALID (1 << 25) -+#define OTGSC_IE_A_SESSION_VALID (1 << 26) -+#define OTGSC_IE_B_SESSION_VALID (1 << 27) -+#define OTGSC_IE_B_SESSION_END (1 << 28) -+#define OTGSC_IE_1ms_TIMER (1 << 29) -+#define OTGSC_IE_DATA_PULSE (1 << 30) -+ -+#if 1 /* DDD FIXME these here for compatibility between my names and Leo's */ -+/* OTG interrupt enable bit masks */ -+#define OTGSC_INTERRUPT_ENABLE_BITS_MASK OTGSC_IE_MASK -+ -+/* OTG interrupt status bit masks */ -+#define OTGSC_INTERRUPT_STATUS_BITS_MASK OTGSC_INTSTS_MASK -+#endif // 1 -+ -+ -+ -+/* x_USBMODE */ -+#undef USBMODE_SDIS /* defined as bit 3 in drivers/usb/host/ehci.h */ -+#define USBMODE_SDIS (1 << 4) /* stream disable mode */ -+#define USBMODE_SLOM (1 << 3) /* setup lockout mode */ -+#define USBMODE_ES (1 << 2) /* (big) endian select */ -+#define USBMODE_CM_MASK (3 << 0) /* controller mode mask */ -+#define USBMODE_CM_HOST (3 << 0) /* host */ -+#define USBMODE_CM_DEVICE (2 << 0) /* device */ -+// DDD #define USBMODE_CM_IDLE (0 << 0) /* idle */ -+ -+/* DDD for compatibility for now */ -+#define USB_MODE_CTRL_MODE_IDLE USBMODE_CM_IDLE -+#define USB_MODE_CTRL_MODE_DEVICE USBMODE_CM_DEVICE -+#define USB_MODE_CTRL_MODE_HOST USBMODE_CM_HOST -+#define USB_MODE_SETUP_LOCK_OFF USBMODE_SLOM -+#define USB_MODE_STREAM_DISABLE USBMODE_SDIS -+ -+ -+/* ULPIVIEW register bits */ -+#define ULPIVW_WU (1 << 31) /* Wakeup */ -+#define ULPIVW_RUN (1 << 30) /* read/write run */ -+#define ULPIVW_WRITE (1 << 29) /* 0=read 1=write */ -+#define ULPIVW_SS (1 << 27) /* SyncState */ -+#define ULPIVW_PORT_MASK 0x07 /* Port field */ -+#define ULPIVW_PORT_SHIFT 24 -+#define ULPIVW_ADDR_MASK 0xFF /* data address field */ -+#define ULPIVW_ADDR_SHIFT 16 -+#define ULPIVW_RDATA_MASK 0xFF /* read data field */ -+#define ULPIVW_RDATA_SHIFT 8 -+#define ULPIVW_WDATA_MASK 0xFF /* write data field */ -+#define ULPIVW_WDATA_SHIFT 0 -+ -+ -+/* Endpoint Flush Register */ -+#define EPFLUSH_TX_OFFSET 0x00010000 -+#define EPFLUSH_RX_OFFSET 0x00000000 -+ -+/* Endpoint Setup Status bit masks */ -+#define EP_SETUP_STATUS_MASK 0x0000003F -+#define EP_SETUP_STATUS_EP0 0x00000001 -+ -+/* ENDPOINTCTRLx Register Bit Masks */ -+#define EPCTRL_TX_ENABLE 0x00800000 -+#define EPCTRL_TX_DATA_TOGGLE_RST 0x00400000 /* Not EP0 */ -+#define EPCTRL_TX_DATA_TOGGLE_INH 0x00200000 /* Not EP0 */ -+#define EPCTRL_TX_TYPE 0x000C0000 -+#define EPCTRL_TX_DATA_SOURCE 0x00020000 /* Not EP0 */ -+#define EPCTRL_TX_EP_STALL 0x00010000 -+#define EPCTRL_RX_ENABLE 0x00000080 -+#define EPCTRL_RX_DATA_TOGGLE_RST 0x00000040 /* Not EP0 */ -+#define EPCTRL_RX_DATA_TOGGLE_INH 0x00000020 /* Not EP0 */ -+#define EPCTRL_RX_TYPE 0x0000000C -+#define EPCTRL_RX_DATA_SINK 0x00000002 /* Not EP0 */ -+#define EPCTRL_RX_EP_STALL 0x00000001 -+ -+/* bit 19-18 and 3-2 are endpoint type */ -+#define EPCTRL_EP_TYPE_CONTROL 0 -+#define EPCTRL_EP_TYPE_ISO 1 -+#define EPCTRL_EP_TYPE_BULK 2 -+#define EPCTRL_EP_TYPE_INTERRUPT 3 -+#define EPCTRL_TX_EP_TYPE_SHIFT 18 -+#define EPCTRL_RX_EP_TYPE_SHIFT 2 -+ -+/* SNOOPn Register Bit Masks */ -+#define SNOOP_ADDRESS_MASK 0xFFFFF000 -+#define SNOOP_SIZE_ZERO 0x00 /* snooping disable */ -+#define SNOOP_SIZE_4KB 0x0B /* 4KB snoop size */ -+#define SNOOP_SIZE_8KB 0x0C -+#define SNOOP_SIZE_16KB 0x0D -+#define SNOOP_SIZE_32KB 0x0E -+#define SNOOP_SIZE_64KB 0x0F -+#define SNOOP_SIZE_128KB 0x10 -+#define SNOOP_SIZE_256KB 0x11 -+#define SNOOP_SIZE_512KB 0x12 -+#define SNOOP_SIZE_1MB 0x13 -+#define SNOOP_SIZE_2MB 0x14 -+#define SNOOP_SIZE_4MB 0x15 -+#define SNOOP_SIZE_8MB 0x16 -+#define SNOOP_SIZE_16MB 0x17 -+#define SNOOP_SIZE_32MB 0x18 -+#define SNOOP_SIZE_64MB 0x19 -+#define SNOOP_SIZE_128MB 0x1A -+#define SNOOP_SIZE_256MB 0x1B -+#define SNOOP_SIZE_512MB 0x1C -+#define SNOOP_SIZE_1GB 0x1D -+#define SNOOP_SIZE_2GB 0x1E /* 2GB snoop size */ -+ -+/* pri_ctrl Register Bit Masks */ -+#define PRI_CTRL_PRI_LVL1 0x0000000C -+#define PRI_CTRL_PRI_LVL0 0x00000003 -+ -+/* si_ctrl Register Bit Masks */ -+#define SI_CTRL_ERR_DISABLE 0x00000010 -+#define SI_CTRL_IDRC_DISABLE 0x00000008 -+#define SI_CTRL_RD_SAFE_EN 0x00000004 -+#define SI_CTRL_RD_PREFETCH_DISABLE 0x00000002 -+#define SI_CTRL_RD_PREFEFETCH_VAL 0x00000001 -+ -+ -+/* control Register Bit Masks */ -+#define USB_CTRL_IOENB 0x00000004 -+#define USB_CTRL_ULPI_INT0EN 0x00000001 -+ -+ -+/* Endpoint Transfer Descriptor bit Masks */ -+#define DTD_NEXT_TERMINATE 0x00000001 -+#define DTD_IOC 0x00008000 -+#define DTD_STATUS_ACTIVE 0x00000080 -+#define DTD_STATUS_HALTED 0x00000040 -+#define DTD_STATUS_DATA_BUFF_ERR 0x00000020 -+#define DTD_STATUS_TRANSACTION_ERR 0x00000008 -+#define DTD_RESERVED_FIELDS 0x80007300 -+#define DTD_ADDR_MASK 0xFFFFFFE0 -+#define DTD_PACKET_SIZE 0x7FFF0000 -+#define DTD_LENGTH_BIT_POS 16 -+#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \ -+ DTD_STATUS_DATA_BUFF_ERR | \ -+ DTD_STATUS_TRANSACTION_ERR) -+/* Alignment requirements; must be a power of two */ -+#define DTD_ALIGNMENT 0x20 -+#define QH_ALIGNMENT 2048 -+ -+/* Controller dma boundary */ -+#define UDC_DMA_BOUNDARY 0x1000 -+ -+#if defined CONFIG_PPC32 -+#define fsl_readl(addr) in_le32((addr)) -+#define fsl_writel(addr, val32) out_le32((addr), (val32)) -+#elif defined CONFIG_COLDFIRE -+#define fsl_readl(addr) in_be32((__force unsigned *)(addr)) -+#define fsl_writel(val32, addr) out_be32((__force unsigned *)(addr), (val32)) -+ -+#define fsl_readw(addr) in_be16((__force unsigned *)(addr)) -+#define fsl_writew(val16, addr) out_be16((__force unsigned *)(addr), (val16)) -+#else -+#error fsl_{readl, writel} must be defined -+#endif -+ -+#endif /* __FSL_USB2_H */ ---- /dev/null -+++ b/include/linux/usb/fsl_xcvr.h -@@ -0,0 +1,42 @@ -+/* -+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. -+ */ -+ -+/* -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+enum fsl_usb_ctrlr { -+ USB_CTRLR_H1 = 0, -+ USB_CTRLR_H2 = 1, -+ USB_CTRLR_OTG = 2, -+}; -+ -+ -+/** -+ * struct fsl_xcvr_ops - USB transceiver operations -+ * -+ * @xcvr_type: one of PORTSCX_PTS_{UTMI,SERIAL,ULPI} -+ * @init: transceiver- and board-specific initialization function -+ * @uninit: transceiver- and board-specific uninitialization function -+ * @set_host: -+ * @set_device: -+ * -+ */ -+struct fsl_xcvr_ops { -+ enum fsl_usb_ctrlr ctrlr; /* H1, H2, OTG */ -+ u32 xcvr_type; -+ -+ void (*init)(struct platform_device *pdev); -+ void (*uninit)(struct platform_device *pdev); -+ void (*set_host)(void); /* DDD combine set_host and _device ? */ -+ void (*set_device)(void); -+ void (*set_vbus_power)(struct fsl_usb2_platform_data *pdata, int on); -+}; -+ -+ ---- /dev/null -+++ b/net/can/dev.c -@@ -0,0 +1,292 @@ -+/* -+ * $Id$ -+ * -+ * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix -+ * Copyright (C) 2006 Andrey Volkov, Varma Electronics -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the version 2 of the GNU General Public License -+ * as published by the Free Software Foundation -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/module.h> -+#include <linux/netdevice.h> -+#include <linux/if_arp.h> -+#include <linux/can.h> -+#include <linux/can/dev.h> -+ -+MODULE_DESCRIPTION("CAN netdevice library"); -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>, " -+ "Andrey Volkov <avolkov@varma-el.com>"); -+ -+/* -+ Abstract: -+ Baud rate calculated with next formula: -+ baud = frq/(brp*(1 + prop_seg+ phase_seg1 + phase_seg2)) -+ -+ This calc function based on work of Florian Hartwich and Armin Bassemi -+ "The Configuration of the CAN Bit Timing" -+ (http://www.semiconductors.bosch.de/pdf/CiA99Paper.pdf) -+ -+ Parameters: -+ [in] -+ bit_time_nsec - expected bit time in nanosecs -+ -+ [out] -+ bit_time - calculated time segments, for meaning of -+ each field read CAN standard. -+*/ -+ -+#define DEFAULT_MAX_BRP 64U -+#define DEFAULT_MAX_SJW 4U -+ -+/* All below values in tq units */ -+#define MAX_BIT_TIME 25U -+#define MIN_BIT_TIME 8U -+#define MAX_PROP_SEG 8U -+#define MAX_PHASE_SEG1 8U -+#define MAX_PHASE_SEG2 8U -+ -+int can_calc_bit_time(struct can_priv *can, u32 baudrate, -+ struct can_bittime_std *bit_time) -+{ -+ int best_error = -1; /* Ariphmetic error */ -+ int df, best_df = -1; /* oscillator's tolerance range */ -+ u32 quanta; /*in tq units*/ -+ u32 brp, phase_seg1, phase_seg2, sjw, prop_seg; -+ u32 brp_min, brp_max, brp_expected; -+ u64 tmp; -+ -+ /* baudrate range [1baud,1Mbaud] */ -+ if (baudrate == 0 || baudrate > 1000000UL) -+ return -EINVAL; -+ -+ tmp = (u64)can->can_sys_clock*1000; -+ do_div(tmp, baudrate); -+ brp_expected = (u32)tmp; -+ -+ brp_min = brp_expected / (1000 * MAX_BIT_TIME); -+ if (brp_min == 0) -+ brp_min = 1; -+ if (brp_min > can->max_brp) -+ return -ERANGE; -+ -+ brp_max = (brp_expected + 500 * MIN_BIT_TIME) / (1000 * MIN_BIT_TIME); -+ if (brp_max == 0) -+ brp_max = 1; -+ if (brp_max > can->max_brp) -+ brp_max = can->max_brp; -+ -+ for (brp = brp_min; brp <= brp_max; brp++) { -+ quanta = brp_expected / (brp * 1000); -+ if (quanta < MAX_BIT_TIME && quanta * brp * 1000 != -+ brp_expected) -+ quanta++; -+ if (quanta < MIN_BIT_TIME || quanta > MAX_BIT_TIME) -+ continue; -+ -+ phase_seg2 = min((quanta - 3) / 2, MAX_PHASE_SEG2); -+ for (sjw = can->max_sjw; sjw > 0; sjw--) { -+ for (; phase_seg2 > sjw; phase_seg2--) { -+ u32 err1, err2; -+ phase_seg1 = phase_seg2 % 2 ? -+ phase_seg2-1 : phase_seg2; -+ prop_seg = quanta-1 - phase_seg2 - phase_seg1; -+ /* -+ * FIXME: support of longer lines -+ * (i.e. bigger prop_seg) is more prefered -+ * than support of cheap oscillators -+ * (i.e. bigger df/phase_seg1/phase_seg2) -+ * */ -+ -+ if (prop_seg < phase_seg1) -+ continue; -+ if (prop_seg > MAX_PROP_SEG) -+ goto next_brp; -+ -+ err1 = phase_seg1 * brp * 500 * 1000 / -+ (13 * brp_expected - phase_seg2 * -+ brp * 1000); -+ err2 = sjw * brp * 50 * 1000 / brp_expected; -+ -+ df = min(err1, err2); -+ if (df >= best_df) { -+ unsigned error = abs(brp_expected * 10 / -+ (brp * (1 + prop_seg + -+ phase_seg1 + -+ phase_seg2)) - 10000); -+ -+ if (error > 10 || error > best_error) -+ continue; -+ -+ if (error == best_error && prop_seg < -+ bit_time->prop_seg) -+ continue; -+ -+ best_error = error; -+ best_df = df; -+ bit_time->brp = brp; -+ bit_time->prop_seg = prop_seg; -+ bit_time->phase_seg1 = phase_seg1; -+ bit_time->phase_seg2 = phase_seg2; -+ bit_time->sjw = sjw; -+ bit_time->sam = -+ (bit_time->phase_seg1 > 3); -+ } -+ } -+ } -+next_brp: ; -+ } -+ -+ if (best_error < 0) -+ return -EDOM; -+ return 0; -+} -+EXPORT_SYMBOL(can_calc_bit_time); -+ -+static int can_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -+{ -+ struct can_priv *can = netdev_priv(dev); -+ struct can_bittime *bt = (struct can_bittime *)&ifr->ifr_ifru; -+ ulong *baudrate = (ulong *)&ifr->ifr_ifru; -+ int ret = -EOPNOTSUPP; -+ -+ dev_dbg(ND2D(dev), "(%s) 0x%08x %p\n", __func__, cmd, &ifr->ifr_ifru); -+ -+ switch (cmd) { -+ case SIOCSCANBAUDRATE: -+ if (can->do_set_bit_time) { -+ struct can_bittime bit_time; -+ ret = can_calc_bit_time(can, *baudrate, &bit_time.std); -+ if (ret != 0) -+ break; -+ bit_time.type = CAN_BITTIME_STD; -+ ret = can->do_set_bit_time(dev, &bit_time); -+ if (!ret) { -+ can->baudrate = *baudrate; -+ can->bit_time = bit_time; -+ } -+ } -+ break; -+ case SIOCGCANBAUDRATE: -+ *baudrate = can->baudrate; -+ ret = 0; -+ break; -+ case SIOCSCANCUSTOMBITTIME: -+ if (can->do_set_bit_time) { -+ ret = can->do_set_bit_time(dev, bt); -+ if (!ret) { -+ can->bit_time = *bt; -+ if (bt->type == CAN_BITTIME_STD && bt->std.brp) { -+ can->baudrate = can->can_sys_clock / -+ (bt->std.brp * (1 + bt->std.prop_seg + -+ bt->std.phase_seg1 + -+ bt->std.phase_seg2)); -+ } else -+ can->baudrate = CAN_BAUDRATE_UNKNOWN; -+ } -+ } -+ break; -+ case SIOCGCANCUSTOMBITTIME: -+ *bt = can->bit_time; -+ ret = 0; -+ break; -+ case SIOCSCANMODE: -+ if (can->do_set_mode) { -+ can_mode_t mode = -+ *((can_mode_t *)(&ifr->ifr_ifru)); -+ if (mode == CAN_MODE_START && -+ can->baudrate == CAN_BAUDRATE_UNCONFIGURED) { -+ dev_info(ND2D(dev), "Impossible to start \ -+ on UNKNOWN speed\n"); -+ ret = EINVAL; -+ } else -+ return can->do_set_mode(dev, mode); -+ } -+ break; -+ case SIOCGCANMODE: -+ *((can_mode_t *)(&ifr->ifr_ifru)) = can->mode; -+ ret = 0; -+ break; -+ case SIOCSCANCTRLMODE: -+ if (can->do_set_ctrlmode) { -+ can_ctrlmode_t ctrlmode = -+ *((can_ctrlmode_t *)(&ifr->ifr_ifru)); -+ return can->do_set_ctrlmode(dev, ctrlmode); -+ } -+ break; -+ case SIOCGCANCTRLMODE: -+ *((can_ctrlmode_t *)(&ifr->ifr_ifru)) = can->ctrlmode; -+ ret = 0; -+ break; -+ case SIOCSCANFILTER: -+ break; -+ case SIOCGCANFILTER: -+ break; -+ case SIOCGCANSTATE: -+ if (can->do_get_state) -+ return can->do_get_state(dev, -+ (can_state_t *)(&ifr->ifr_ifru)); -+ break; -+ case SIOCGCANSTATS: -+ *((struct can_device_stats *)(&ifr->ifr_ifru)) = can->can_stats; -+ ret = 0; -+ break; -+ } -+ -+ return ret; -+} -+ -+static void can_setup(struct net_device *dev) -+{ -+ dev->type = ARPHRD_CAN; -+ dev->mtu = sizeof(struct can_frame); -+ dev->do_ioctl = can_ioctl; -+ dev->hard_header_len = 0; -+ dev->addr_len = 0; -+ dev->tx_queue_len = 10; -+ -+ /* New-style flags. */ -+ dev->flags = IFF_NOARP; -+ dev->features = NETIF_F_NO_CSUM; -+} -+ -+/* -+ * Function alloc_candev -+ * Allocates and sets up an CAN device -+ */ -+struct net_device *alloc_candev(int sizeof_priv) -+{ -+ struct net_device *dev; -+ struct can_priv *priv; -+ -+ dev = alloc_netdev(sizeof_priv, "can%d", can_setup); -+ if (!dev) -+ return NULL; -+ -+ priv = netdev_priv(dev); -+ -+ priv->baudrate = CAN_BAUDRATE_UNCONFIGURED; -+ priv->max_brp = DEFAULT_MAX_BRP; -+ priv->max_sjw = DEFAULT_MAX_SJW; -+ spin_lock_init(&priv->irq_lock); -+ -+ return dev; -+} -+EXPORT_SYMBOL(alloc_candev); -+ -+void free_candev(struct net_device *dev) -+{ -+ free_netdev(dev); -+} -+EXPORT_SYMBOL(free_candev); ---- a/net/can/Makefile -+++ b/net/can/Makefile -@@ -10,3 +10,6 @@ can-raw-objs := raw.o - - obj-$(CONFIG_CAN_BCM) += can-bcm.o - can-bcm-objs := bcm.o -+ -+obj-$(CONFIG_CAN) += candev.o -+candev-objs := dev.o ---- a/net/irda/irlap.c -+++ b/net/irda/irlap.c -@@ -627,7 +627,7 @@ void irlap_status_indication(struct irla - { - switch (quality_of_link) { - case STATUS_NO_ACTIVITY: -- IRDA_MESSAGE("IrLAP, no activity on link!\n"); -+ /* IRDA_MESSAGE("IrLAP, no activity on link!\n"); */ - break; - case STATUS_NOISY: - IRDA_MESSAGE("IrLAP, noisy link!\n"); ---- /dev/null -+++ b/scripts/checkfiles -@@ -0,0 +1,35 @@ -+#!/bin/sh -+# (c) 2007, Erez Zadok <ezk@cs.sunysb.edu> (initial version) -+# Licensed under the terms of the GNU GPL License version 2 -+# -+# Check source files for compliance with coding standards, using terse -+# output in the style that g/cc produces. This output can be easily parsed -+# within text editors (e.g., emacs/vim) which can produce a split text -+# screen showing in one screen the error message, and in another screen the -+# corresponding source file, with the cursor placed on the offending line. -+# See for example the documentation for Emacs's "next-error" command, often -+# bound to M-x ` (ESC x back-tick). -+ -+# Usage: checkfiles file [files...] -+# if "file" is a directory, will check all *.[hc] files recursively -+ -+# check usage -+usage() { -+ echo "Usage: checkfiles file [files...]" -+ echo "(if \"file\" is a directory, check recursively for all C sources/headers)" -+ exit 1 -+} -+ -+# if test -z "$@" ; then -+# usage -+# fi -+if ! test -f scripts/checkpatch.pl ; then -+ echo "checkfiles: must run from top level source tree" -+ exit 1 -+fi -+ -+# check coding-style compliance of each source file found -+find "$@" -type f -name '*.[hc]' | \ -+while read f ; do -+ diff -u /dev/null $f | perl scripts/checkpatch.pl - -+done ---- /dev/null -+++ b/scripts/checkfilesterse -@@ -0,0 +1,34 @@ -+#!/bin/sh -+# (c) 2007, Erez Zadok <ezk@cs.sunysb.edu> (initial version) -+# Licensed under the terms of the GNU GPL License version 2 -+# -+# Check source files for compliance with coding standards, using terse -+# output in the style that g/cc produces. This output can be easily parsed -+# within text editors (e.g., emacs/vim) which can produce a split text -+# screen showing in one screen the error message, and in another screen the -+# corresponding source file, with the cursor placed on the offending line. -+# See for example the documentation for Emacs's "next-error" command, often -+# bound to M-x ` (ESC x back-tick). -+ -+# Usage: checkfiles file [files...] -+# if "file" is a directory, will check all *.[hc] files recursively -+ -+# check usage -+usage() { -+ echo "Usage: checkfiles file [files...]" -+ echo "(if \"file\" is a directory, check recursively for all C sources/headers)" -+ exit 1 -+} -+if test -z "" ; then -+ usage -+fi -+if ! test -f scripts/checkpatch.pl ; then -+ echo "checkfiles: must run from top level source tree" -+ exit 1 -+fi -+ -+# check coding-style compliance of each source file found, using terse output -+find "$@" -type f -name '*.[hc]' | \ -+while read f ; do -+ diff -u /dev/null $f | perl scripts/checkpatch.pl -t - -+done |