diff options
Diffstat (limited to 'target/linux/danube/files/drivers/serial/danube_asc.c')
-rw-r--r-- | target/linux/danube/files/drivers/serial/danube_asc.c | 608 |
1 files changed, 0 insertions, 608 deletions
diff --git a/target/linux/danube/files/drivers/serial/danube_asc.c b/target/linux/danube/files/drivers/serial/danube_asc.c deleted file mode 100644 index b50b1e7..0000000 --- a/target/linux/danube/files/drivers/serial/danube_asc.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * Driver for DANUBEASC serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (C) 2004 Infineon IFAP DC COM CPE - * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/circ_buf.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/irq.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/bitops.h> -#include <asm/danube/danube.h> -#include <asm/danube/danube_irq.h> -#include <asm/danube/danube_serial.h> - -#define PORT_DANUBEASC 111 - -#include <linux/serial_core.h> - -#define UART_DUMMY_UER_RX 1 - -static void danubeasc_tx_chars(struct uart_port *port); -extern void prom_printf(const char * fmt, ...); -static struct uart_port danubeasc_port; -static struct uart_driver danubeasc_reg; -static unsigned int uartclk = 0; -extern unsigned int danube_get_fpi_hz(void); - -static void -danubeasc_stop_tx (struct uart_port *port) -{ - /* fifo underrun shuts up after firing once */ - return; -} - -static void -danubeasc_start_tx (struct uart_port *port) -{ - unsigned long flags; - - local_irq_save(flags); - danubeasc_tx_chars(port); - local_irq_restore(flags); - - return; -} - -static void -danubeasc_stop_rx (struct uart_port *port) -{ - /* clear the RX enable bit */ - writel(ASCWHBSTATE_CLRREN, DANUBE_ASC1_WHBSTATE); -} - -static void -danubeasc_enable_ms (struct uart_port *port) -{ - /* no modem signals */ - return; -} - -static void -danubeasc_rx_chars (struct uart_port *port) -{ - struct tty_struct *tty = port->info->tty; - unsigned int ch = 0, rsr = 0, fifocnt; - - fifocnt = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_RXFFLMASK; - while (fifocnt--) - { - u8 flag = TTY_NORMAL; - ch = readl(DANUBE_ASC1_RBUF); - rsr = (readl(DANUBE_ASC1_STATE) & ASCSTATE_ANY) | UART_DUMMY_UER_RX; - tty_flip_buffer_push(tty); - port->icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (rsr & ASCSTATE_ANY) { - if (rsr & ASCSTATE_PE) { - port->icount.parity++; - writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE, DANUBE_ASC1_WHBSTATE); - } else if (rsr & ASCSTATE_FE) { - port->icount.frame++; - writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRFE, DANUBE_ASC1_WHBSTATE); - } - if (rsr & ASCSTATE_ROE) { - port->icount.overrun++; - writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE); - } - - rsr &= port->read_status_mask; - - if (rsr & ASCSTATE_PE) - flag = TTY_PARITY; - else if (rsr & ASCSTATE_FE) - flag = TTY_FRAME; - } - - if ((rsr & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - - if (rsr & ASCSTATE_ROE) - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - if (ch != 0) - tty_flip_buffer_push(tty); - - return; -} - - -static void -danubeasc_tx_chars (struct uart_port *port) -{ - struct circ_buf *xmit = &port->info->xmit; - - if (uart_tx_stopped(port)) { - danubeasc_stop_tx(port); - return; - } - - while(((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF) != DANUBEASC_TXFIFO_FULL) - { - if (port->x_char) { - writel(port->x_char, DANUBE_ASC1_TBUF); - port->icount.tx++; - port->x_char = 0; - continue; - } - - if (uart_circ_empty(xmit)) - break; - - writel(port->info->xmit.buf[port->info->xmit.tail], DANUBE_ASC1_TBUF); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t -danubeasc_tx_int (int irq, void *port) -{ - writel(ASC_IRNCR_TIR, DANUBE_ASC1_IRNCR); - danubeasc_start_tx(port); - mask_and_ack_danube_irq(irq); - - return IRQ_HANDLED; -} - -static irqreturn_t -danubeasc_er_int (int irq, void *port) -{ - /* clear any pending interrupts */ - writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE | - ASCWHBSTATE_CLRFE | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE); - - return IRQ_HANDLED; -} - -static irqreturn_t -danubeasc_rx_int (int irq, void *port) -{ - writel(ASC_IRNCR_RIR, DANUBE_ASC1_IRNCR); - danubeasc_rx_chars((struct uart_port *) port); - mask_and_ack_danube_irq(irq); - - return IRQ_HANDLED; -} - -static unsigned int -danubeasc_tx_empty (struct uart_port *port) -{ - int status; - - status = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK; - - return status ? 0 : TIOCSER_TEMT; -} - -static unsigned int -danubeasc_get_mctrl (struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR; -} - -static void -danubeasc_set_mctrl (struct uart_port *port, u_int mctrl) -{ - return; -} - -static void -danubeasc_break_ctl (struct uart_port *port, int break_state) -{ - return; -} - -static void -danubeasc1_hw_init (void) -{ - /* this setup was probably already done in ROM/u-boot but we do it again*/ - /* TODO: GPIO pins are multifunction */ - writel(readl(DANUBE_ASC1_CLC) & ~DANUBE_ASC1_CLC_DISS, DANUBE_ASC1_CLC); - writel((readl(DANUBE_ASC1_CLC) & ~ASCCLC_RMCMASK) | (1 << ASCCLC_RMCOFFSET), DANUBE_ASC1_CLC); - writel(0, DANUBE_ASC1_PISEL); - writel(((DANUBEASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & - ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON); - writel(((DANUBEASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & - ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON); - wmb (); - - /*framing, overrun, enable */ - writel(readl(DANUBE_ASC1_CON) | ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN, - DANUBE_ASC1_CON); -} - -static int -danubeasc_startup (struct uart_port *port) -{ - unsigned long flags; - int retval; - - /* this assumes: CON.BRS = CON.FDE = 0 */ - if (uartclk == 0) - uartclk = danube_get_fpi_hz(); - - danubeasc_port.uartclk = uartclk; - - danubeasc1_hw_init(); - - local_irq_save(flags); - - retval = request_irq(DANUBEASC1_RIR, danubeasc_rx_int, IRQF_DISABLED, "asc_rx", port); - if (retval){ - printk("failed to request danubeasc_rx_int\n"); - return retval; - } - - retval = request_irq(DANUBEASC1_TIR, danubeasc_tx_int, IRQF_DISABLED, "asc_tx", port); - if (retval){ - printk("failed to request danubeasc_tx_int\n"); - goto err1; - } - - retval = request_irq(DANUBEASC1_EIR, danubeasc_er_int, IRQF_DISABLED, "asc_er", port); - if (retval){ - printk("failed to request danubeasc_er_int\n"); - goto err2; - } - - writel(ASC_IRNREN_RX_BUF | ASC_IRNREN_TX_BUF | ASC_IRNREN_ERR | ASC_IRNREN_TX, - DANUBE_ASC1_IRNREN); - - local_irq_restore(flags); - - return 0; - -err2: - free_irq(DANUBEASC1_TIR, port); - -err1: - free_irq(DANUBEASC1_RIR, port); - local_irq_restore(flags); - - return retval; -} - -static void -danubeasc_shutdown (struct uart_port *port) -{ - free_irq(DANUBEASC1_RIR, port); - free_irq(DANUBEASC1_TIR, port); - free_irq(DANUBEASC1_EIR, port); - /* - * disable the baudrate generator to disable the ASC - */ - writel(0, DANUBE_ASC1_CON); - - /* flush and then disable the fifos */ - writel(readl(DANUBE_ASC1_RXFCON) | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON); - writel(readl(DANUBE_ASC1_RXFCON) & ~ASCRXFCON_RXFEN, DANUBE_ASC1_RXFCON); - writel(readl(DANUBE_ASC1_TXFCON) | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON); - writel(readl(DANUBE_ASC1_TXFCON) & ~ASCTXFCON_TXFEN, DANUBE_ASC1_TXFCON); -} - -static void danubeasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old) -{ - unsigned int cflag; - unsigned int iflag; - unsigned int quot; - unsigned int baud; - unsigned int con = 0; - unsigned long flags; - - cflag = new->c_cflag; - iflag = new->c_iflag; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS7: - con = ASCCON_M_7ASYNC; - break; - - case CS5: - case CS6: - default: - con = ASCCON_M_8ASYNC; - break; - } - - if (cflag & CSTOPB) - con |= ASCCON_STP; - - if (cflag & PARENB) { - if (!(cflag & PARODD)) - con &= ~ASCCON_ODD; - else - con |= ASCCON_ODD; - } - - port->read_status_mask = ASCSTATE_ROE; - if (iflag & INPCK) - port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE; - - port->ignore_status_mask = 0; - if (iflag & IGNPAR) - port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE; - - if (iflag & IGNBRK) { - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (iflag & IGNPAR) - port->ignore_status_mask |= ASCSTATE_ROE; - } - - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_UER_RX; - - /* set error signals - framing, parity and overrun, enable receiver */ - con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN; - - local_irq_save(flags); - - /* set up CON */ - writel(readl(DANUBE_ASC1_CON) | con, DANUBE_ASC1_CON); - - /* Set baud rate - take a divider of 2 into account */ - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); - quot = uart_get_divisor(port, baud); - quot = quot / 2 - 1; - - /* disable the baudrate generator */ - writel(readl(DANUBE_ASC1_CON) & ~ASCCON_R, DANUBE_ASC1_CON); - - /* make sure the fractional divider is off */ - writel(readl(DANUBE_ASC1_CON) & ~ASCCON_FDE, DANUBE_ASC1_CON); - - /* set up to use divisor of 2 */ - writel(readl(DANUBE_ASC1_CON) & ~ASCCON_BRS, DANUBE_ASC1_CON); - - /* now we can write the new baudrate into the register */ - writel(quot, DANUBE_ASC1_BG); - - /* turn the baudrate generator back on */ - writel(readl(DANUBE_ASC1_CON) | ASCCON_R, DANUBE_ASC1_CON); - - /* enable rx */ - writel(ASCWHBSTATE_SETREN, DANUBE_ASC1_WHBSTATE); - - local_irq_restore(flags); -} - -static const char* -danubeasc_type (struct uart_port *port) -{ - return port->type == PORT_DANUBEASC ? "DANUBEASC" : NULL; -} - -static void -danubeasc_release_port (struct uart_port *port) -{ - return; -} - -static int -danubeasc_request_port (struct uart_port *port) -{ - return 0; -} - -static void -danubeasc_config_port (struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_DANUBEASC; - danubeasc_request_port(port); - } -} - -static int -danubeasc_verify_port (struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_DANUBEASC) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= NR_IRQS) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops danubeasc_pops = { - .tx_empty = danubeasc_tx_empty, - .set_mctrl = danubeasc_set_mctrl, - .get_mctrl = danubeasc_get_mctrl, - .stop_tx = danubeasc_stop_tx, - .start_tx = danubeasc_start_tx, - .stop_rx = danubeasc_stop_rx, - .enable_ms = danubeasc_enable_ms, - .break_ctl = danubeasc_break_ctl, - .startup = danubeasc_startup, - .shutdown = danubeasc_shutdown, - .set_termios = danubeasc_set_termios, - .type = danubeasc_type, - .release_port = danubeasc_release_port, - .request_port = danubeasc_request_port, - .config_port = danubeasc_config_port, - .verify_port = danubeasc_verify_port, -}; - -static struct uart_port danubeasc_port = { - membase: (void *)DANUBE_ASC1_BASE_ADDR, - mapbase: DANUBE_ASC1_BASE_ADDR, - iotype: SERIAL_IO_MEM, - irq: DANUBEASC1_RIR, - uartclk: 0, - fifosize: 16, - unused: {DANUBEASC1_TIR, DANUBEASC1_EIR}, - type: PORT_DANUBEASC, - ops: &danubeasc_pops, - flags: ASYNC_BOOT_AUTOCONF, -}; - -static void -danubeasc_console_write (struct console *co, const char *s, u_int count) -{ - int i, fifocnt; - unsigned long flags; - - local_irq_save(flags); - for (i = 0; i < count; i++) - { - /* wait until the FIFO is not full */ - do - { - fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF; - } while (fifocnt == DANUBEASC_TXFIFO_FULL); - - if (s[i] == '\0') - { - break; - } - - if (s[i] == '\n') - { - writel('\r', DANUBE_ASC1_TBUF); - do - { - fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF; - } while (fifocnt == DANUBEASC_TXFIFO_FULL); - } - writel(s[i], DANUBE_ASC1_TBUF); - } - - local_irq_restore(flags); -} - -static int __init -danubeasc_console_setup (struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (uartclk == 0) - uartclk = danube_get_fpi_hz(); - co->index = 0; - port = &danubeasc_port; - danubeasc_port.uartclk = uartclk; - danubeasc_port.type = PORT_DANUBEASC; - - if (options){ - uart_parse_options(options, &baud, &parity, &bits, &flow); - } - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver danubeasc_reg; -static struct console danubeasc_console = { - name: "ttyS", - write: danubeasc_console_write, - device: uart_console_device, - setup: danubeasc_console_setup, - flags: CON_PRINTBUFFER, - index: -1, - data: &danubeasc_reg, -}; - -static int __init -danubeasc_console_init (void) -{ - register_console(&danubeasc_console); - return 0; -} -console_initcall(danubeasc_console_init); - -static struct uart_driver danubeasc_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = 1, - .cons = &danubeasc_console, -}; - -static int __init -danubeasc_init (void) -{ - unsigned char res; - - uart_register_driver(&danubeasc_reg); - res = uart_add_one_port(&danubeasc_reg, &danubeasc_port); - - return res; -} - -static void __exit -danubeasc_exit (void) -{ - uart_unregister_driver(&danubeasc_reg); -} - -module_init(danubeasc_init); -module_exit(danubeasc_exit); - -MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); -MODULE_DESCRIPTION("MIPS Danube serial port driver"); -MODULE_LICENSE("GPL"); |