diff options
Diffstat (limited to 'target/linux/etrax/patches-2.6.25/100-compile_fixes.patch')
| -rw-r--r-- | target/linux/etrax/patches-2.6.25/100-compile_fixes.patch | 302 |
1 files changed, 0 insertions, 302 deletions
diff --git a/target/linux/etrax/patches-2.6.25/100-compile_fixes.patch b/target/linux/etrax/patches-2.6.25/100-compile_fixes.patch deleted file mode 100644 index 2a9fc65..0000000 --- a/target/linux/etrax/patches-2.6.25/100-compile_fixes.patch +++ /dev/null @@ -1,302 +0,0 @@ ---- a/arch/cris/Makefile -+++ b/arch/cris/Makefile -@@ -33,7 +33,7 @@ endif - - LD = $(CROSS_COMPILE)ld -mcrislinux - --OBJCOPYFLAGS := -O binary -R .note -R .comment -S -+OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S - - CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE) - ---- a/arch/cris/arch-v10/boot/Makefile -+++ b/arch/cris/arch-v10/boot/Makefile -@@ -2,9 +2,6 @@ - # arch/cris/arch-v10/boot/Makefile - # - --OBJCOPY = objcopy-cris --OBJCOPYFLAGS = -O binary --remove-section=.bss -- - subdir- := compressed rescue - targets := Image - -@@ -14,7 +11,6 @@ $(obj)/Image: vmlinux FORCE - - $(obj)/compressed/vmlinux: $(obj)/Image FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin - - $(obj)/zImage: $(obj)/compressed/vmlinux - @cp $< $@ ---- a/arch/cris/arch-v10/boot/compressed/Makefile -+++ b/arch/cris/arch-v10/boot/compressed/Makefile -@@ -2,13 +2,9 @@ - # arch/cris/arch-v10/boot/compressed/Makefile - # - --CC = gcc-cris -melf $(LINUXINCLUDE) - ccflags-y += -O2 --LD = ld-cris - ldflags-y += -T $(obj)/decompress.ld - OBJECTS = $(obj)/head.o $(obj)/misc.o --OBJCOPY = objcopy-cris --OBJCOPYFLAGS = -O binary --remove-section=.bss - - quiet_cmd_image = BUILD $@ - cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ -@@ -21,12 +17,6 @@ - $(obj)/decompress.bin: $(obj)/decompress.o FORCE - $(call if_changed,objcopy) - --$(obj)/head.o: $(obj)/head.S .config -- @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ -- --$(obj)/misc.o: $(obj)/misc.c .config -- @$(CC) -D__KERNEL__ -c $< -o $@ -- - $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE - $(call if_changed,image) - ---- a/arch/cris/arch-v10/boot/compressed/decompress.ld -+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld -@@ -1,4 +1,4 @@ --OUTPUT_FORMAT(elf32-us-cris) -+OUTPUT_FORMAT(elf32-cris) - - MEMORY - { ---- a/arch/cris/arch-v10/boot/compressed/head.S -+++ b/arch/cris/arch-v10/boot/compressed/head.S -@@ -10,13 +10,14 @@ - - #define ASSEMBLER_MACROS_ONLY - #include <asm/arch/sv_addr_ag.h> -+#include <linux/autoconf.h> - - #define RAM_INIT_MAGIC 0x56902387 - #define COMMAND_LINE_MAGIC 0x87109563 - - ;; Exported symbols - -- .globl _input_data -+ .globl input_data - - - .text -@@ -26,7 +27,7 @@ - - ;; We need to initialze DRAM registers before we start using the DRAM - -- cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? -+ cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? - beq dram_init_finished - nop - -@@ -36,91 +37,91 @@ dram_init_finished: - - ;; Initiate the PA and PB ports - -- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 -- move.b r0, [R_PORT_PA_DATA] -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 -+ move.b $r0, [R_PORT_PA_DATA] - -- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 -- move.b r0, [R_PORT_PA_DIR] -+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 -+ move.b $r0, [R_PORT_PA_DIR] - -- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 -- move.b r0, [R_PORT_PB_DATA] -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 -+ move.b $r0, [R_PORT_PB_DATA] - -- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 -- move.b r0, [R_PORT_PB_DIR] -+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 -+ move.b $r0, [R_PORT_PB_DIR] - - ;; Setup the stack to a suitably high address. - ;; We assume 8 MB is the minimum DRAM in an eLinux - ;; product and put the sp at the top for now. - -- move.d 0x40800000, sp -+ move.d 0x40800000, $sp - - ;; Figure out where the compressed piggyback image is - ;; in the flash (since we wont try to copy it to DRAM - ;; before unpacking). It is at _edata, but in flash. - ;; Use (_edata - basse) as offset to the current PC. - --basse: move.d pc, r5 -- and.d 0x7fffffff, r5 ; strip any non-cache bit -- subq 2, r5 ; compensate for the move.d pc instr -- move.d r5, r0 ; save for later - flash address of 'basse' -- add.d _edata, r5 -- sub.d basse, r5 ; r5 = flash address of '_edata' -+basse: move.d $pc, $r5 -+ and.d 0x7fffffff, $r5 ; strip any non-cache bit -+ subq 2, $r5 ; compensate for the move.d pc instr -+ move.d $r5, $r0 ; save for later - flash address of 'basse' -+ add.d _edata, $r5 -+ sub.d basse, $r5 ; r5 = flash address of '_edata' - - ;; Copy text+data to DRAM - -- move.d basse, r1 ; destination -- move.d _edata, r2 ; end destination --1: move.w [r0+], r3 -- move.w r3, [r1+] -- cmp.d r2, r1 -+ move.d basse, $r1 ; destination -+ move.d _edata, $r2 ; end destination -+1: move.w [$r0+], $r3 -+ move.w $r3, [$r1+] -+ cmp.d $r2, $r1 - bcs 1b - nop - -- move.d r5, [_input_data] ; for the decompressor -+ move.d $r5, [input_data] ; for the decompressor - - - ;; Clear the decompressors BSS (between _edata and _end) - -- moveq 0, r0 -- move.d _edata, r1 -- move.d _end, r2 --1: move.w r0, [r1+] -- cmp.d r2, r1 -+ moveq 0, $r0 -+ move.d _edata, $r1 -+ move.d _end, $r2 -+1: move.w $r0, [$r1+] -+ cmp.d $r2, $r1 - bcs 1b - nop - - ;; Save command line magic and address. -- move.d _cmd_line_magic, $r12 -+ move.d cmd_line_magic, $r12 - move.d $r10, [$r12] -- move.d _cmd_line_addr, $r12 -+ move.d cmd_line_addr, $r12 - move.d $r11, [$r12] - - ;; Do the decompression and save compressed size in _inptr - -- jsr _decompress_kernel -+ jsr decompress_kernel - - ;; Put start address of root partition in r9 so the kernel can use it - ;; when mounting from flash - -- move.d [_input_data], r9 ; flash address of compressed kernel -- add.d [_inptr], r9 ; size of compressed kernel -+ move.d [input_data], $r9 ; flash address of compressed kernel -+ add.d [inptr], $r9 ; size of compressed kernel - - ;; Restore command line magic and address. -- move.d _cmd_line_magic, $r10 -+ move.d cmd_line_magic, $r10 - move.d [$r10], $r10 -- move.d _cmd_line_addr, $r11 -+ move.d cmd_line_addr, $r11 - move.d [$r11], $r11 - - ;; Enter the decompressed kernel -- move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized -+ move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized - jump 0x40004000 ; kernel is linked to this address - - .data - --_input_data: -+input_data: - .dword 0 ; used by the decompressor --_cmd_line_magic: -+cmd_line_magic: - .dword 0 --_cmd_line_addr: -+cmd_line_addr: - .dword 0 - #include "../../lib/hw_settings.S" ---- a/arch/cris/arch-v10/boot/compressed/misc.c -+++ b/arch/cris/arch-v10/boot/compressed/misc.c -@@ -5,7 +5,7 @@ - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 -- * puts by Nick Holloway 1993, better puts by Martin Mares 1995 -+ * putstr by Nick Holloway 1993, better putstr by Martin Mares 1995 - * adaptation for Linux/CRIS Axis Communications AB, 1999 - * - */ -@@ -99,12 +99,12 @@ static void error(char *m); - static void gzip_mark(void **); - static void gzip_release(void **); - --static void puts(const char *); -+static void putstr(const char *); - - /* the "heap" is put directly after the BSS ends, at end */ - --extern int end; --static long free_mem_ptr = (long)&end; -+extern int _end; -+static long free_mem_ptr = (long)&_end; - - #include "../../../../../lib/inflate.c" - -@@ -139,7 +139,7 @@ static void gzip_release(void **ptr) - /* decompressor info and error messages to serial console */ - - static void --puts(const char *s) -+putstr(const char *s) - { - #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL - while(*s) { -@@ -209,9 +209,9 @@ flush_window() - static void - error(char *x) - { -- puts("\n\n"); -- puts(x); -- puts("\n\n -- System halted\n"); -+ putstr("\n\n"); -+ putstr(x); -+ putstr("\n\n -- System halted\n"); - - while(1); /* Halt */ - } -@@ -257,14 +257,7 @@ decompress_kernel() - - makecrc(); - -- __asm__ volatile ("move vr,%0" : "=rm" (revision)); -- if (revision < 10) -- { -- puts("You need an ETRAX 100LX to run linux 2.6\n"); -- while(1); -- } -- -- puts("Uncompressing Linux...\n"); -+ putstr("Uncompressing Linux...\n"); - gunzip(); -- puts("Done. Now booting the kernel.\n"); -+ putstr("Done. Now booting the kernel.\n"); - } ---- a/arch/cris/arch-v10/mm/init.c -+++ b/arch/cris/arch-v10/mm/init.c -@@ -184,6 +184,9 @@ paging_init(void) - - free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0); - } -+void free_initrd_mem(unsigned long start, unsigned long end) -+{ -+} - - /* Initialize remaps of some I/O-ports. It is important that this - * is called before any driver is initialized. |