summaryrefslogtreecommitdiff
path: root/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch')
-rw-r--r--target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch263
1 files changed, 0 insertions, 263 deletions
diff --git a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch b/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch
deleted file mode 100644
index 4032550..0000000
--- a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch
+++ /dev/null
@@ -1,263 +0,0 @@
---- a/drivers/serial/crisv10.c
-+++ b/drivers/serial/crisv10.c
-@@ -28,12 +28,15 @@ static char *serial_version = "$Revision
- #include <linux/mutex.h>
- #include <linux/bitops.h>
- #include <linux/device.h>
-+#include <linux/seq_file.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-
--#include <asm/io.h>
- #include <asm/irq.h>
- #include <asm/dma.h>
- #include <asm/system.h>
--#include <linux/delay.h>
-
- #include <arch/svinto.h>
-
-@@ -457,7 +460,6 @@ static struct e100_serial rs_table[] = {
-
- #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-
--static struct ktermios *serial_termios[NR_PORTS];
- #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
- static struct fast_timer fast_timers[NR_PORTS];
- #endif
-@@ -4221,151 +4223,132 @@ rs_open(struct tty_struct *tty, struct f
- return 0;
- }
-
-+#ifdef CONFIG_PROC_FS
- /*
- * /proc fs routines....
- */
-
--static int line_info(char *buf, struct e100_serial *info)
-+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
- {
-- char stat_buf[30];
-- int ret;
- unsigned long tmp;
-
-- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
-- info->line, (unsigned long)info->ioport, info->irq);
-+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
-+ info->line, (unsigned long)info->ioport, info->irq);
-
- if (!info->ioport || (info->type == PORT_UNKNOWN)) {
-- ret += sprintf(buf+ret, "\n");
-- return ret;
-+ seq_printf(m, "\n");
-+ return;
- }
-
-- stat_buf[0] = 0;
-- stat_buf[1] = 0;
-- if (!E100_RTS_GET(info))
-- strcat(stat_buf, "|RTS");
-- if (!E100_CTS_GET(info))
-- strcat(stat_buf, "|CTS");
-- if (!E100_DTR_GET(info))
-- strcat(stat_buf, "|DTR");
-- if (!E100_DSR_GET(info))
-- strcat(stat_buf, "|DSR");
-- if (!E100_CD_GET(info))
-- strcat(stat_buf, "|CD");
-- if (!E100_RI_GET(info))
-- strcat(stat_buf, "|RI");
--
-- ret += sprintf(buf+ret, " baud:%d", info->baud);
--
-- ret += sprintf(buf+ret, " tx:%lu rx:%lu",
-+ seq_printf(m, " baud:%d", info->baud);
-+ seq_printf(m, " tx:%lu rx:%lu",
- (unsigned long)info->icount.tx,
- (unsigned long)info->icount.rx);
- tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-- if (tmp) {
-- ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
-- (unsigned long)tmp,
-- (unsigned long)SERIAL_XMIT_SIZE);
-- }
--
-- ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
-- (unsigned long)info->recv_cnt,
-- (unsigned long)info->max_recv_cnt);
-+ if (tmp)
-+ seq_printf(m, " tx_pend:%lu/%lu",
-+ (unsigned long)tmp,
-+ (unsigned long)SERIAL_XMIT_SIZE);
-+
-+ seq_printf(m, " rx_pend:%lu/%lu",
-+ (unsigned long)info->recv_cnt,
-+ (unsigned long)info->max_recv_cnt);
-
- #if 1
- if (info->port.tty) {
--
- if (info->port.tty->stopped)
-- ret += sprintf(buf+ret, " stopped:%i",
-- (int)info->port.tty->stopped);
-+ seq_printf(m, " stopped:%i",
-+ (int)info->port.tty->stopped);
- if (info->port.tty->hw_stopped)
-- ret += sprintf(buf+ret, " hw_stopped:%i",
-- (int)info->port.tty->hw_stopped);
-+ seq_printf(m, " hw_stopped:%i",
-+ (int)info->port.tty->hw_stopped);
- }
-
- {
- unsigned char rstat = info->ioport[REG_STATUS];
-- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
-- ret += sprintf(buf+ret, " xoff_detect:1");
-+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
-+ seq_printf(m, " xoff_detect:1");
- }
-
- #endif
-
--
--
--
- if (info->icount.frame)
-- ret += sprintf(buf+ret, " fe:%lu",
-- (unsigned long)info->icount.frame);
-+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
-
- if (info->icount.parity)
-- ret += sprintf(buf+ret, " pe:%lu",
-- (unsigned long)info->icount.parity);
-+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
-
- if (info->icount.brk)
-- ret += sprintf(buf+ret, " brk:%lu",
-- (unsigned long)info->icount.brk);
-+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
-
- if (info->icount.overrun)
-- ret += sprintf(buf+ret, " oe:%lu",
-- (unsigned long)info->icount.overrun);
-+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
-
- /*
- * Last thing is the RS-232 status lines
- */
-- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
-- return ret;
-+ if (!E100_RTS_GET(info))
-+ seq_puts(m, "|RTS");
-+ if (!E100_CTS_GET(info))
-+ seq_puts(m, "|CTS");
-+ if (!E100_DTR_GET(info))
-+ seq_puts(m, "|DTR");
-+ if (!E100_DSR_GET(info))
-+ seq_puts(m, "|DSR");
-+ if (!E100_CD_GET(info))
-+ seq_puts(m, "|CD");
-+ if (!E100_RI_GET(info))
-+ seq_puts(m, "|RI");
-+ seq_puts(m, "\n");
- }
-
--int rs_read_proc(char *page, char **start, off_t off, int count,
-- int *eof, void *data)
-+
-+static int crisv10_proc_show(struct seq_file *m, void *v)
- {
-- int i, len = 0, l;
-- off_t begin = 0;
-+ int i;
-+
-+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
-
-- len += sprintf(page, "serinfo:1.0 driver:%s\n",
-- serial_version);
-- for (i = 0; i < NR_PORTS && len < 4000; i++) {
-+ for (i = 0; i < NR_PORTS; i++) {
- if (!rs_table[i].enabled)
- continue;
-- l = line_info(page + len, &rs_table[i]);
-- len += l;
-- if (len+begin > off+count)
-- goto done;
-- if (len+begin < off) {
-- begin += len;
-- len = 0;
-- }
-+ seq_line_info(m, &rs_table[i]);
- }
- #ifdef DEBUG_LOG_INCLUDED
- for (i = 0; i < debug_log_pos; i++) {
-- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
-- len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
-- if (len+begin > off+count)
-- goto done;
-- if (len+begin < off) {
-- begin += len;
-- len = 0;
-- }
-+ seq_printf(m, "%-4i %lu.%lu ",
-+ i, debug_log[i].time,
-+ timer_data_to_ns(debug_log[i].timer_data));
-+ seq_printf(m, debug_log[i].string, debug_log[i].value);
- }
-- len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
-- i, DEBUG_LOG_SIZE, begin+len);
-+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
- debug_log_pos = 0;
- #endif
-+ return 0;
-+}
-
-- *eof = 1;
--done:
-- if (off >= len+begin)
-- return 0;
-- *start = page + (off-begin);
-- return ((count < begin+len-off) ? count : begin+len-off);
-+static int crisv10_proc_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, crisv10_proc_show, NULL);
- }
-
-+static const struct file_operations crisv10_proc_fops = {
-+ .owner = THIS_MODULE,
-+ .open = crisv10_proc_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+#endif
-+
-+
- /* Finally, routines used to initialize the serial driver. */
-
--static void
--show_serial_version(void)
-+static void show_serial_version(void)
- {
- printk(KERN_INFO
-- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
-+ "ETRAX 100LX serial-driver %s, "
-+ "(c) 2000-2004 Axis Communications AB\r\n",
- &serial_version[11]); /* "$Revision: x.yy" */
- }
-
-@@ -4389,9 +4372,11 @@ static const struct tty_operations rs_op
- .break_ctl = rs_break,
- .send_xchar = rs_send_xchar,
- .wait_until_sent = rs_wait_until_sent,
-- .read_proc = rs_read_proc,
- .tiocmget = rs_tiocmget,
-- .tiocmset = rs_tiocmset
-+ .tiocmset = rs_tiocmset,
-+#ifdef CONFIG_PROC_FS
-+ .proc_fops = &crisv10_proc_fops,
-+#endif
- };
-
- static struct class *rs_class;